Start working to make the codebase buildable with -Wsign-compare.
* ps/build-sign-compare:
t/helper: don't depend on implicit wraparound
scalar: address -Wsign-compare warnings
builtin/patch-id: fix type of `get_one_patchid()`
builtin/blame: fix type of `length` variable when emitting object ID
gpg-interface: address -Wsign-comparison warnings
daemon: fix type of `max_connections`
daemon: fix loops that have mismatching integer types
global: trivial conversions to fix `-Wsign-compare` warnings
pkt-line: fix -Wsign-compare warning on 32 bit platform
csum-file: fix -Wsign-compare warning on 32-bit platform
diff.h: fix index used to loop through unsigned integer
config.mak.dev: drop `-Wno-sign-compare`
global: mark code units that generate warnings with `-Wsign-compare`
compat/win32: fix -Wsign-compare warning in "wWinMain()"
compat/regex: explicitly ignore "-Wsign-compare" warnings
git-compat-util: introduce macros to disable "-Wsign-compare" warnings
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a30154187a (describe: stop traversing when we run out of names,
2024-10-31) taught git-describe to automatically reduce the
max_candidates setting to match the total number of possible names. This
lets us break out of the traversal rather than fruitlessly searching for
more candidates when there are no more to be found.
However, setting max_candidates to 0 (e.g., if the repo has no tags)
overlaps with the --exact-match option, which explicitly uses the same
value. And this causes a regression with --always, which is ignored in
exact-match mode. We used to get this in a repo with no tags:
$ git describe --always HEAD
b2f0a7f
and now we get:
$ git describe --always HEAD
fatal: no tag exactly matches 'b2f0a7f47f5f2aebe1e7fceff19a57de20a78c06'
The reason is that we bail early in describe_commit() when
max_candidates is set to 0. This logic goes all the way back to
2c33f75754 (Teach git-describe --exact-match to avoid expensive tag
searches, 2008-02-24).
We should obviously fix this regression, but there are two paths,
depending on what you think:
$ git describe --always --exact-match
and
$ git describe --always --candidates=0
should do. Since the "--always" option was added, it has always been
ignored in --exact-match (or --candidates=0) mode. I.e., we treat
--exact-match as a true exact match of a tag, and never fall back to
using --always, even if it was requested.
If we think that's a bug (or at least a misfeature), then the right
solution is to fix it by removing the early bail-out from 2c33f75754,
letting the noop algorithm run and then hitting the --always fallback
output. And then our regression naturally goes away, because it follows
the same path.
If we think that the current "--exact-match --always" behavior is the
right thing, then we have to differentiate the case where we
automatically reduced max_candidates to 0 from the case where the user
asked for it specifically. That's possible to do with a flag, but we can
also just reimplement the logic from a30154187a to explicitly break out
of the traversal when we run out of candidates (rather than relying on
the existing max_candidates check).
My gut feeling is along the lines of option 1 (it's a bug, and people
would be happy for "--exact-match --always" to give the fallback rather
than ignoring "--always"). But the documentation can be interpreted in
the other direction, and we've certainly lived with the existing
behavior for many years. So it's possible that changing it now is the
wrong thing.
So this patch fixes the regression by taking the second option,
retaining the "--exact-match" behavior as-is. There are two new tests.
The first shows that the regression is fixed (we don't even need a new
repo without tags; a restrictive --match is enough to create the
situation that there are no candidate names).
The second test confirms that the "--exact-match --always" behavior
remains unchanged and continues to die when there is no tag pointing at
the specified commit. It's possible we may reconsider this in the
future, but this shows that the approach described above is implemented
faithfully.
We can also run the perf tests in p6100 to see that we've retained the
speedup that a30154187a was going for:
Test HEAD^ HEAD
--------------------------------------------------------------------------------------
6100.2: describe HEAD 0.72(0.64+0.07) 0.72(0.66+0.06) +0.0%
6100.3: describe HEAD with one max candidate 0.01(0.00+0.00) 0.01(0.00+0.00) +0.0%
6100.4: describe HEAD with one tag 0.01(0.01+0.00) 0.01(0.01+0.00) +0.0%
Reported-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to describe a commit, we'll traverse from the commit,
collecting candidate tags that point to its ancestors. But once we've
seen all of the tags in the repo, there's no point in traversing
further. There's nothing left to find!
For a default "git describe", this isn't usually a big problem. In a
large repo you'll probably have multiple tags, so we'll eventually find
10 candidates (the default for max_candidates) and stop there. And in a
small repo, it's quick to traverse to the root.
But you can imagine a large repo with few tags. Or, as we saw in a real
world case, explicitly limiting the set of matches like this (on
linux.git):
git describe --match=v6.12-rc4 HEAD
which goes all the way to the root before realizing that no, there are
no other tags under consideration besides the one we fed via --match.
If we add in "--candidates=1" there, it's much faster (at least as of
the previous commit).
But we should be able to speed this up without the user asking for it.
After expanding all matching tags, we know the total number of names. We
could just stop the traversal there, but as hinted at above we already
have a mechanism for doing that: the max_candidate limit. So we can just
reduce that limit to match the number of possible candidates.
Our p6100 test shows this off:
Test HEAD^ HEAD
---------------------------------------------------------------------------------------
6100.2: describe HEAD 0.71(0.65+0.06) 0.72(0.68+0.04) +1.4%
6100.3: describe HEAD with one max candidate 0.01(0.00+0.00) 0.01(0.00+0.00) +0.0%
6100.4: describe HEAD with one tag 0.72(0.66+0.05) 0.01(0.00+0.00) -98.6%
Now we are fast automatically, just as if --candidates=1 were supplied
by the user.
Reported-by: Josh Poimboeuf <jpoimboe@kernel.org>
Helped-by: Rasmus Villemoes <ravi@prevas.dk>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, describe considers only 10 candidate matches, and stops
traversing when we have enough. This makes things much faster in a large
repository, where collecting all candidates requires walking all the way
down to the root (or at least to the oldest tag). This goes all the way
back to 8713ab3079 (Improve git-describe performance by reducing
revision listing., 2007-01-13).
However, we don't stop immediately when we have enough candidates. We
keep traversing and only bail when we find one more candidate that we're
ignoring. Usually this is not too expensive, if the tags are sprinkled
evenly throughout history. But if you are unlucky, you might hit the max
candidate quickly, and then have a huge swath of history before finding
the next one.
Our p6100 test has exactly this unlucky case: with a max of "1", we find
a recent tag quickly and then have to go all the way to the root to find
the old tag that will be discarded.
A more interesting real-world case is:
git describe --candidates=1 --match=v6.12-rc4 HEAD
in the linux.git repo. There we restrict the set of tags to a single
one, so there is no older candidate to find at all! But despite
--candidates=1, we keep traversing to the root only to find nothing.
So why do we keep traversing after hitting thet max? There are two
reasons I can see:
1. In theory the extra information that there was another candidate
could be useful, and we record it in the gave_up_on variable. But
we only show this information with --debug.
2. After finding the candidate, there's more processing we do in our
loop. The most important of this is propagating the "within" flags
to our parent commits, and putting them in the commit_list we'll
use for finish_depth_computation().
That function continues the traversal until we've counted all
commits reachable from the starting point but not reachable from
our best candidate tag (so essentially counting "$tag..$start", but
avoiding re-walking over the bits we've seen). If we break
immediately without putting those commits into the list, our depth
computation will be wrong (in the worst case we'll count all the
way down to the root, not realizing those commits are included in
our tag).
But we don't need to find a new candidate for (2). As soon as we finish
the loop iteration where we hit max_candidates, we can then quit on the
next iteration. This should produce the same output as the original code
(which could, after all, find a candidate on the very next commit
anyway) but ends the traversal with less pointless digging.
We still have to set "gave_up_on"; we've popped it off the list and it
has to go back. An alternative would be to re-order the loop so that it
never gets popped, but it's perhaps still useful to show in the --debug
output, so we need to know it anyway. We do have to adjust the --debug
output since it's now just a commit where we stopped traversing, and not
the max+1th candidate.
p6100 shows the speedup using linux.git:
Test HEAD^ HEAD
---------------------------------------------------------------------------------------
6100.2: describe HEAD 0.70(0.63+0.06) 0.71(0.66+0.04) +1.4%
6100.3: describe HEAD with one max candidate 0.70(0.64+0.05) 0.01(0.00+0.00) -98.6%
6100.4: describe HEAD with one tag 0.70(0.67+0.03) 0.70(0.63+0.06) +0.0%
Reported-by: Josh Poimboeuf <jpoimboe@kernel.org>
Helped-by: Rasmus Villemoes <ravi@prevas.dk>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The convention to calling into built-in command implementation has
been updated to pass the repository, if known, together with the
prefix value.
* jc/pass-repo-to-builtins:
add: pass in repo variable instead of global the_repository
builtin: remove USE_THE_REPOSITORY for those without the_repository
builtin: remove USE_THE_REPOSITORY_VARIABLE from builtin.h
builtin: add a repository parameter for builtin functions
Code clean-up.
* jc/range-diff-lazy-setup:
remerge-diff: clean up temporary objdir at a central place
remerge-diff: lazily prepare temporary objdir on demand
Instead of including USE_THE_REPOSITORY_VARIABLE by default on every
builtin, remove it from builtin.h and add it to all the builtins that
include builtin.h (by definition, that means all builtins/*.c).
Also, remove the include statement for repository.h since it gets
brought in through builtin.h.
The next step will be to migrate each builtin
from having to use the_repository.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to reduce the usage of the global the_repository, add a
parameter to builtin functions that will get passed a repository
variable.
This commit uses UNUSED on most of the builtin functions, as subsequent
commits will modify the actual builtins to pass the repository parameter
down.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The refs API has been taught to give symref target information to
the users of ref iterators, allowing for-each-ref and friends to
avoid an extra ref_resolve_* API call per a symbolic ref.
* jc/refs-symref-referent:
ref-filter: populate symref from iterator
refs: add referent to each_ref_fn
refs: keep track of unresolved reference value in iterators
After running a diff between two things, or a series of diffs while
walking the history, the diff computation is concluded by a call to
diff_result_code() to extract the exit status of the diff machinery.
The function can work on "struct diffopt", but all the callers
historically and currently pass "struct diffopt" that is embedded in
the "struct rev_info" that is used to hold the remerge_diff bit and
the remerge_objdir variable that points at the temporary object
directory in use.
Redefine diff_result_code() to take the whole "struct rev_info" to
give it an access to these members related to remerge-diff, so that
it can get rid of the temporary object directory for any and all
callers that used the feature. We can lose the equivalent code to
do so from the code paths for individual commands, diff-tree, diff,
and log.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a parameter to each_ref_fn so that callers to the ref APIs
that use this function as a callback can have acess to the
unresolved value of a symbolic ref.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We never free the `struct strvec args` variable in `describe_blob()`,
which thus causes a memory leak. Fix this.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running git-describe(1) with `--dirty`, we will set up a `struct
rev_info` with arguments for git-diff-index(1). The way we assemble the
arguments it causes two memory leaks though:
- We never release the `struct strvec`.
- `setup_revisions()` may end up removing some entries from the
`strvec`, which we wouldn't free even if we released the struct.
While we could plug those leaks, this is ultimately unnecessary as the
arguments we pass are part of a static array anyway. So instead,
refactor the code to drop the `struct strvec` and just pass this static
array directly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling `git describe --contains=`, we end up invoking
`cmd_name_rev()` with some munged argv array. This array may contain
allocated strings and furthermore will likely be modified by the called
function. This results in two memory leaks:
- First, we leak the array that we use to assemble the arguments.
- Second, we leak the allocated strings that we may have put into the
array.
Fix those leaks by creating a separate copy of the array that we can
hand over to `cmd_name_rev()`. This allows us to free all strings
contained in the `strvec`, as the original vector will not be modified
anymore.
Furthermore, free both the `strvec` and the copied array to fix the
first memory leak.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git describe --dirty --broken" forgot to refresh the index before
seeing if there is any chang, ("git describe --dirty" correctly did
so), which has been corrected.
* as/describe-broken-refresh-index-fix:
describe: refresh the index when 'broken' flag is used
When describe is run with 'dirty' flag, we refresh the index
to make sure it is in sync with the filesystem before
determining if the working tree is dirty. However, this is
not done for the codepath where the 'broken' flag is used.
This causes `git describe --broken --dirty` to false
positively report the worktree being dirty if a file has
different stat info than what is recorded in the index.
Running `git update-index -q --refresh` to refresh the index
before running diff-index fixes the problem.
Also add tests to deliberately update stat info of a
file before running describe to verify it behaves correctly.
Reported-by: Paul Millar <paul.millar@desy.de>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Abhijeet Sonar <abhijeet.nkt@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both `peel_object()` and `peel_iterated_oid()` implicitly rely on
`the_repository` to look up objects. Despite the fact that we want to
get rid of `the_repository`, it also leads to some restrictions in our
ref iterators when trying to retrieve the peeled value for a repository
other than `the_repository`.
Refactor these functions such that both take a repository as argument
and remove the now-unnecessary restrictions.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ps/refs-without-the-repository:
refs: remove functions without ref store
cocci: apply rules to rewrite callers of "refs" interfaces
cocci: introduce rules to transform "refs" to pass ref store
refs: add `exclude_patterns` parameter to `for_each_fullref_in()`
refs: introduce missing functions that accept a `struct ref_store`
Apply the rules that rewrite callers of "refs" interfaces to explicitly
pass `struct ref_store`. The resulting patch has been applied with the
`--whitespace=fix` option.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert builtins to use `the_repository->index` instead of `the_index`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unused parameters to functions are marked as such, and/or removed,
in order to bring us closer to -Wunused-parameter clean.
* jk/unused-post-2.42-part2:
parse-options: mark unused parameters in noop callback
interpret-trailers: mark unused "unset" parameters in option callbacks
parse-options: add more BUG_ON() annotations
merge: do not pass unused opt->value parameter
parse-options: mark unused "opt" parameter in callbacks
parse-options: prefer opt->value to globals in callbacks
checkout-index: delay automatic setting of to_tempfile
format-patch: use OPT_STRING_LIST for to/cc options
merge: simplify parsing of "-n" option
merge: make xopts a strvec
We have several parse-options callbacks that ignore their "opt"
parameters entirely. This is a little unusual, as we'd normally put the
result of the parsing into opt->value. In the case of these callbacks,
though, they directly manipulate global variables instead (and in
most cases the caller sets opt->value to NULL in the OPT_CALLBACK
declaration).
The immediate symptom we'd like to deal with is that the unused "opt"
variables trigger -Wunused-parameter. But how to fix that is debatable.
One option is to annotate them with UNUSED. But another is to have the
caller pass in the appropriate variable via opt->value, and use it. That
has the benefit of making the callbacks reusable (in theory at least),
and makes it clear from the OPT_CALLBACK declaration which variables
will be affected (doubly so for the cases in builtin/fast-export.c,
where we do set opt->value, but it is completely ignored!).
The slight downside is that we lose type safety, since they're now
passing through void pointers.
I went with the "just use them" approach here. The loss of type safety
is unfortunate, but that is already an issue with most of the other
callbacks. If we want to try to address that, we should do so more
consistently (and this patch would prepare these callbacks for whatever
we choose to do there).
Note that in the cases in builtin/fast-export.c, we are passing
anonymous enums. We'll have to give them names so that we can declare
the appropriate pointer type within the callbacks.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many programs use diff_result_code() to get a user-visible program exit
code from a diff result (e.g., checking opts.found_changes if
--exit-code was requested).
This function also takes a "status" parameter, which seems at first
glance that it could be used to propagate an error encountered when
computing the diff. But it doesn't work that way:
- negative values are passed through as-is, but are not appropriate as
program exit codes
- when --exit-code or --check is in effect, we _ignore_ the passed-in
status completely. So a failed diff which did not have a chance to
set opts.found_changes would erroneously report "success, no
changes" instead of propagating the error.
After recent cleanups, neither of these bugs is possible to trigger, as
every caller just passes in "0". So rather than fixing them, we can
simply drop the useless parameter instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Neither of these functions ever returns a value other than zero.
Instead, they expect unrecoverable errors to exit immediately, and
things like "--exit-code" are stored inside the diff_options struct to
be handled later via diff_result_code().
Some callers do check the return values, but many don't bother. Let's
drop the useless return values, which are misleading callers about how
the functions work. This could be seen as a step in the wrong direction,
as we might want to eventually "lib-ify" these to more cleanly return
errors up the stack, in which case we'd have to add the return values
back in. But there are some benefits to doing this now:
1. In the current code, somebody could accidentally add a "return -1"
to one of the functions, which would be erroneously ignored by many
callers. By removing the return code, the compiler can notice the
mismatch and force the developer to decide what to do.
Obviously the other option here is that we could start consistently
checking the error code in every caller. But it would be dead code,
and we wouldn't get any compile-time help in catching new cases.
2. It communicates the situation to callers, who may want to choose a
different function. These functions are really thin wrappers for
doing git-diff-files and git-diff-index within the process. But
callers who care about recovering from an error here are probably
better off using the underlying library functions, many of
which do return errors.
If somebody eventually wants to teach these functions to propagate
errors, they'll have to switch back to returning a value, effectively
reverting this patch. But at least then they will be starting with a
level playing field: they know that they will need to inspect each
caller to see how it should handle the error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 2c33f75754 (Teach git-describe --exact-match to avoid expensive
tag searches, 2008-02-24) git describe accepts --no-exact-match, but it
does the same as --exact-match, an alias for --candidates=0. That's
because it's defined using OPT_SET_INT with a value of 0, which sets 0
when negated as well.
Let --no-exact-match set the number of candidates to the default value
instead. Users that need a more specific lack of exactitude can specify
their preferred value using --candidates, as before.
The "--no-exact-match" option was not covered in the tests, so let's
add a few. Also add a case where --exact-match option is used on a
commit that cannot be described without distance from tags and make
sure the command fails.
Signed-off-by: René Scharfe <l.s.r@web.de>
[jc: added trivial tests]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The vast majority of files including object-store.h did not need dir.h
nor khash.h. Split the header into two files, and let most just depend
upon object-store-ll.h, while letting the two callers that need it
depend on the full object-store.h.
After this patch:
$ git grep -h include..object-store | sort | uniq -c
2 #include "object-store.h"
129 #include "object-store-ll.h"
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The include of wildmatch.h in git-compat-util.h was added in cebcab189a
(Makefile: add USE_WILDMATCH to use wildmatch as fnmatch, 2013-01-01) as
a way to be able to compile-time force any calls to fnmatch() to instead
invoke wildmatch(). The defines and inline function were removed in
70a8fc999d (stop using fnmatch (either native or compat), 2014-02-15),
and this include in git-compat-util.h has been unnecessary ever since.
Remove the include from git-compat-util.h, but add it to the .c files
that had omitted the direct #include they needed.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the functions defined in read-cache.c, move their declarations from
cache.h to a new header, read-cache-ll.h. Also move some related inline
functions from cache.h to read-cache.h. The purpose of the
read-cache-ll.h/read-cache.h split is that about 70% of the sites don't
need the inline functions and the extra headers they include.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Header clean-up.
* en/header-split-cache-h: (24 commits)
protocol.h: move definition of DEFAULT_GIT_PORT from cache.h
mailmap, quote: move declarations of global vars to correct unit
treewide: reduce includes of cache.h in other headers
treewide: remove double forward declaration of read_in_full
cache.h: remove unnecessary includes
treewide: remove cache.h inclusion due to pager.h changes
pager.h: move declarations for pager.c functions from cache.h
treewide: remove cache.h inclusion due to editor.h changes
editor: move editor-related functions and declarations into common file
treewide: remove cache.h inclusion due to object.h changes
object.h: move some inline functions and defines from cache.h
treewide: remove cache.h inclusion due to object-file.h changes
object-file.h: move declarations for object-file.c functions from cache.h
treewide: remove cache.h inclusion due to git-zlib changes
git-zlib: move declarations for git-zlib functions from cache.h
treewide: remove cache.h inclusion due to object-name.h changes
object-name.h: move declarations for object-name.c functions from cache.h
treewide: remove unnecessary cache.h inclusion
treewide: be explicit about dependence on mem-pool.h
treewide: be explicit about dependence on oid-array.h
...
Split key function and data structure definitions out of cache.h to
new header files and adjust the users.
* en/header-split-cleanup:
csum-file.h: remove unnecessary inclusion of cache.h
write-or-die.h: move declarations for write-or-die.c functions from cache.h
treewide: remove cache.h inclusion due to setup.h changes
setup.h: move declarations for setup.c functions from cache.h
treewide: remove cache.h inclusion due to environment.h changes
environment.h: move declarations for environment.c functions from cache.h
treewide: remove unnecessary includes of cache.h
wrapper.h: move declarations for wrapper.c functions from cache.h
path.h: move function declarations for path.c functions from cache.h
cache.h: remove expand_user_path()
abspath.h: move absolute path functions from cache.h
environment: move comment_line_char from cache.h
treewide: remove unnecessary cache.h inclusion from several sources
treewide: remove unnecessary inclusion of gettext.h
treewide: be explicit about dependence on gettext.h
treewide: remove unnecessary cache.h inclusion from a few headers
Code clean-up around the use of the_repository.
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
git describe compares the index with the working tree when (and only
when) it is run with the "--dirty" flag. This is done by the
run_diff_index() function. The function has been made aware of the
sparse-index in the series that led to 8d2c3732 (Merge branch
'ld/sparse-diff-blame', 2021-12-21). Hence we can just set the
requires-full-index to false for "describe".
Performance metrics
Test HEAD~1 HEAD
-------------------------------------------------------------------------------------------------
2000.2: git describe --dirty (full-v3) 0.08(0.09+0.01) 0.08(0.06+0.03) +0.0%
2000.3: git describe --dirty (full-v4) 0.09(0.07+0.03) 0.08(0.05+0.04) -11.1%
2000.4: git describe --dirty (sparse-v3) 0.88(0.82+0.06) 0.02(0.01+0.05) -97.7%
2000.5: git describe --dirty (sparse-v4) 0.68(0.60+0.08) 0.02(0.02+0.04) -97.1%
2000.6: echo >>new && git describe --dirty (full-v3) 0.08(0.04+0.05) 0.08(0.05+0.04) +0.0%
2000.7: echo >>new && git describe --dirty (full-v4) 0.08(0.07+0.03) 0.08(0.05+0.04) +0.0%
2000.8: echo >>new && git describe --dirty (sparse-v3) 0.75(0.69+0.07) 0.02(0.03+0.03) -97.3%
2000.9: echo >>new && git describe --dirty (sparse-v4) 0.81(0.73+0.09) 0.02(0.01+0.05) -97.5%
Signed-off-by: Raghul Nanth A <nanth.raghul@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"commit.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"cache.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply "index-compatibility.pending.cocci" rule to "builtin/*", but
exclude those where we conflict with in-flight changes.
As a result some of them end up using only "the_index", so let's have
them use the more narrow "USE_THE_INDEX_VARIABLE" rather than
"USE_THE_INDEX_COMPATIBILITY_MACROS".
Manual changes not made by coccinelle, that were squashed in:
* Whitespace-wrap argument lists for repo_hold_locked_index(),
repo_read_index_preload() and repo_refresh_and_write_index(), in cases
where the line became too long after the transformation.
* Change "refresh_cache()" to "refresh_index()" in a comment in
"builtin/update-index.c".
* For those whose call was followed by perror("<macro-name>"), change
it to perror("<function-name>"), referring to the new function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The short-help text shown by "git cmd -h" and the synopsis text
shown at the beginning of "git help cmd" have been made more
consistent.
* ab/doc-synopsis-and-cmd-usage: (34 commits)
tests: assert consistent whitespace in -h output
tests: start asserting that *.txt SYNOPSIS matches -h output
doc txt & -h consistency: make "worktree" consistent
worktree: define subcommand -h in terms of command -h
reflog doc: list real subcommands up-front
doc txt & -h consistency: make "commit" consistent
doc txt & -h consistency: make "diff-tree" consistent
doc txt & -h consistency: use "[<label>...]" for "zero or more"
doc txt & -h consistency: make "annotate" consistent
doc txt & -h consistency: make "stash" consistent
doc txt & -h consistency: add missing options
doc txt & -h consistency: use "git foo" form, not "git-foo"
doc txt & -h consistency: make "bundle" consistent
doc txt & -h consistency: make "read-tree" consistent
doc txt & -h consistency: make "rerere" consistent
doc txt & -h consistency: add missing options and labels
doc txt & -h consistency: make output order consistent
doc txt & -h consistency: add or fix optional "--" syntax
doc txt & -h consistency: fix mismatching labels
doc SYNOPSIS & -h: use "-" to separate words in labels, not "_"
...
Fix various issues of SYNOPSIS and -h output syntax where:
* Options such as --force were missing entirely
* ...or the short option, such as -f
* We said "opts" or "options", but could instead enumerate
the (small) set of supported options
* Options that were missing entirely (ls-remote's --sort=<key>)
As we can specify "--sort" multiple times (it's backed by a
string-list" it should really be "[(--sort=<key>)...]", which is
what "git for-each-ref" lists it as, but let's leave that issue for
a subsequent cleanup, and stop at making these consistent. Other
"ref-filter.h" users share the same issue, e.g. "git-branch.txt".
* For "verify-tag" and "verify-commit" we were missing the "--raw"
option.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As reported in [1] the "UNUSED(var)" macro introduced in
2174b8c75de (Merge branch 'jk/unused-annotation' into next,
2022-08-24) breaks coccinelle's parsing of our sources in files where
it occurs.
Let's instead partially go with the approach suggested in [2] of
making this not take an argument. As noted in [1] "coccinelle" will
ignore such tokens in argument lists that it doesn't know about, and
it's less of a surprise to syntax highlighters.
This undoes the "help us notice when a parameter marked as unused is
actually use" part of 9b24034754 (git-compat-util: add UNUSED macro,
2022-08-19), a subsequent commit will further tweak the macro to
implement a replacement for that functionality.
1. https://lore.kernel.org/git/220825.86ilmg4mil.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/220819.868rnk54ju.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hashmap comparison functions must conform to a particular callback
interface, but many don't use all of their parameters. Especially the
void cmp_data pointer, but some do not use keydata either (because they
can easily form a full struct to pass when doing lookups). Let's mark
these to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
