The advice messages now tell the newer 'git config set' command to
set the advice.token configuration variable to squelch a message.
* bf/explicit-config-set-in-advice-messages:
advice: suggest using subcommand "git config set"
The advice message currently suggests using "git config advice..." to
disable advice messages, but since
00bbdde141 (builtin/config: introduce "set" subcommand, 2024-05-06)
we have the "set" subcommand for config. Since using the subcommand is
more in-line with the modern interface, any advice should be promoting
its usage. Change the disable advice message to use the subcommand
instead. Change all uses of "git config advice" in the tests to use the
subcommand.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the plumbing level allows you to create refs/tags/HEAD
and refs/heads/HEAD, doing so makes it confusing within the context
of the UI Git Porcelain commands provides. Just like we prevent a
branch from getting called "HEAD" at the Porcelain layer (i.e. "git
branch" command), teach "git tag" to refuse to create a tag "HEAD".
With a few new tests, we make sure that
- "git tag HEAD" and "git tag -a HEAD" are rejected
- "git update-ref refs/tags/HEAD" is still allowed (this is a
deliberate design decision to allow others to create their own UI
on top of Git infrastructure that may be different from our UI).
- "git tag -d HEAD" can remove refs/tags/HEAD to recover from an
mistake.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use write_script which takes care of emitting the `#!/bin/sh` line
and the `chmod +x`.
Signed-off-by: AbdAlRahman Gad <abdobngad@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some test bodies and test description are surrounded with double
quotes instead of single quotes, violating our coding style.
Signed-off-by: AbdAlRahman Gad <abdobngad@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test body should begin with a single quote right after the test
description instead of backslash followed by new line.
Signed-off-by: AbdAlRahman Gad <abdobngad@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several tests in t7004 where the test description that
follows `test_expect_success` is on a separate line, violating our
coding style. Adapt these to be on the same line.
Signed-off-by: AbdAlRahman Gad <abdobngad@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not prepare expect and other things outside test_expect_success.
If such code fails for some reason, we won't necessarily hear about
it in a timely fashion (or perhaps at all). By placing all code inside
`test_expect_success` it ensures that we know immediately if it fails.
Also add '\' before EOF to avoid shell interpolation and '-' to allow
indentation of the body.
Signed-off-by: AbdAlRahman Gad <abdobngad@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use <<-\EOF instead of <<\EOF where the latter allows us to indent
the body of the here-doc.
Signed-off-by: AbdAlRahman Gad <abdobngad@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests in t7004 has multiple commands on a single line,
which is discouraged. Adapt these by splitting up these into one
line per command.
Signed-off-by: AbdAlRahman Gad <abdobngad@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modernize 't7004' by removing whitespace after redirect operators.
Signed-off-by: AbdAlRahman Gad <abdobngad@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-tag supports interpreting trailers from an annotated tag message,
using --list --format="%(trailers)". However, the available methods to
add a trailer to a tag message (namely -F or --editor) are not as
ergonomic.
In a previous patch, we moved git-commit's implementation of its
--trailer option to the trailer.h API. Let's use that new function to
teach git-tag the same --trailer option, emulating as much of
git-commit's behavior as much as possible.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: John Passaro <john.a.passaro@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git tools all consistently encourage users to avoid whitespaces at
the end of line by giving them features like "git diff --check" and
"git am --whitespace=fix". Make sure that the advice messages we
give users avoid trailing whitespaces. We shouldn't be wasting
vertical screen real estate by adding blank lines in advice messages
that are supposed to be concise hints, but as long as we write such
blank line in our "hints", we should do it right.
A test that expects the current behaviour of leaving trailing
whitespaces has been adjusted.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When '--no-sort' is passed to 'for-each-ref', 'tag', and 'branch', the
printed refs are still sorted by ascending refname. Change the handling of
sort options in these commands so that '--no-sort' to truly disables
sorting.
'--no-sort' does not disable sorting in these commands is because their
option parsing does not distinguish between "the absence of '--sort'"
(and/or values for tag.sort & branch.sort) and '--no-sort'. Both result in
an empty 'sorting_options' string list, which is parsed by
'ref_sorting_options()' to create the 'struct ref_sorting *' for the
command. If the string list is empty, 'ref_sorting_options()' interprets
that as "the absence of '--sort'" and returns the default ref sorting
structure (equivalent to "refname" sort).
To handle '--no-sort' properly while preserving the "refname" sort in the
"absence of --sort'" case, first explicitly add "refname" to the string list
*before* parsing options. This alone doesn't actually change any behavior,
since 'compare_refs()' already falls back on comparing refnames if two refs
are equal w.r.t all other sort keys.
Now that the string list is populated by default, '--no-sort' is the only
way to empty the 'sorting_options' string list. Update
'ref_sorting_options()' to return a NULL 'struct ref_sorting *' if the
string list is empty, and add a condition to 'ref_array_sort()' to skip the
sort altogether if the sort structure is NULL. Note that other functions
using 'struct ref_sorting *' do not need any changes because they already
ignore NULL values.
Finally, remove the condition around sorting in 'ls-remote', since it's no
longer necessary. Unlike 'for-each-ref' et. al., it does *not* do any
sorting by default. This default is preserved by simply leaving its sort key
string list empty before parsing options; if no additional sort keys are
set, 'struct ref_sorting *' is NULL and sorting is skipped.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref transaction can fail after the user has written their tag
message. In particular, if there exists a tag `foo/bar` and `git tag -a
foo` is said then the command will only fail once it tries to write
`refs/tags/foo`, which is after the file has been unlinked.
Hold on to the message file for a little longer so that it is not
unlinked before the fatal error occurs.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The standard tag message file is unlinked if the tag is created.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch --format=..." and "git format-patch --format=..."
learns "--omit-empty" to hide refs that whose formatting result
becomes an empty string from the output.
* ow/ref-filter-omit-empty:
branch, for-each-ref, tag: add option to omit empty lines
If the given format string expands to the empty string, a newline is
still printed. This makes using the output linewise more tedious. For
example, git update-ref --stdin does not accept empty lines.
Add options to "git branch", "git for-each-ref", and "git tag" to
not print these empty lines. The default behavior remains the same.
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Assorted config API updates.
* ab/config-multi-and-nonbool:
for-each-repo: with bad config, don't conflate <path> and <cmd>
config API: add "string" version of *_value_multi(), fix segfaults
config API users: test for *_get_value_multi() segfaults
for-each-repo: error on bad --config
config API: have *_multi() return an "int" and take a "dest"
versioncmp.c: refactor config reading next commit
config API: add and use a "git_config_get()" family of functions
config tests: add "NULL" tests for *_get_value_multi()
config tests: cover blind spots in git_die_config() tests
Fix numerous and mostly long-standing segfaults in consumers of
the *_config_*value_multi() API. As discussed in the preceding commit
an empty key in the config syntax yields a "NULL" string, which these
users would give to strcmp() (or similar), resulting in segfaults.
As this change shows, most users users of the *_config_*value_multi()
API didn't really want such an an unsafe and low-level API, let's give
them something with the safety of git_config_get_string() instead.
This fix is similar to what the *_string() functions and others
acquired in[1] and [2]. Namely introducing and using a safer
"*_get_string_multi()" variant of the low-level "_*value_multi()"
function.
This fixes segfaults in code introduced in:
- d811c8e17c (versionsort: support reorder prerelease suffixes, 2015-02-26)
- c026557a37 (versioncmp: generalize version sort suffix reordering, 2016-12-08)
- a086f921a7 (submodule: decouple url and submodule interest, 2017-03-17)
- a6be5e6764 (log: add log.excludeDecoration config option, 2020-04-16)
- 92156291ca (log: add default decoration filter, 2022-08-05)
- 50a044f1e4 (gc: replace config subprocesses with API calls, 2022-09-27)
There are now two users ofthe low-level API:
- One in "builtin/for-each-repo.c", which we'll convert in a
subsequent commit.
- The "t/helper/test-config.c" code added in [3].
As seen in the preceding commit we need to give the
"t/helper/test-config.c" caller these "NULL" entries.
We could also alter the underlying git_configset_get_value_multi()
function to be "string safe", but doing so would leave no room for
other variants of "*_get_value_multi()" that coerce to other types.
Such coercion can't be built on the string version, since as we've
established "NULL" is a true value in the boolean context, but if we
coerced it to "" for use in a list of strings it'll be subsequently
coerced to "false" as a boolean.
The callback pattern being used here will make it easy to introduce
e.g. a "multi" variant which coerces its values to "bool", "int",
"path" etc.
1. 40ea4ed903 (Add config_error_nonbool() helper function,
2008-02-11)
2. 6c47d0e8f3 (config.c: guard config parser from value=NULL,
2008-02-11).
3. 4c715ebb96 (test-config: add tests for the config_set API,
2014-07-28)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we'll discuss in the subsequent commit these tests all
show *_get_value_multi() API users unable to handle there being a
value-less key in the config, which is represented with a "NULL" for
that entry in the "string" member of the returned "struct
string_list", causing a segfault.
These added tests exhaustively test for that issue, as we'll see in a
subsequent commit we'll need to change all of the API users
of *_get_value_multi(). These cases were discovered by triggering each
one individually, and then adding these tests.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change implemented the ahead_behind() method, including an
algorithm to compute the ahead/behind values for a number of commit tips
relative to a number of commit bases. Now, integrate that algorithm as
part of 'git for-each-ref' hidden behind a new format atom,
ahead-behind. This naturally extends to 'git branch' and 'git tag'
builtins, as well.
This format allows specifying multiple bases, if so desired, and all
matching references are compared against all of those bases. For this
reason, failing to read a reference provided from these atoms results in
an error.
In order to translate the ahead_behind() method information to the
format output code in ref-filter.c, we must populate arrays of
ahead_behind_count structs. In struct ref_array, we store the full array
that will be passed to ahead_behind(). In struct ref_array_item, we
store an array of pointers that point to the relvant items within the
full array. In this way, we can pull all relevant ahead/behind values
directly when formatting output for a specific item. It also ensures the
lifetime of the ahead_behind_count structs matches the time that the
array is being used.
Add specific tests of the ahead/behind counts in t6600-test-reach.sh, as
it has an interesting repository shape. In particular, its merging
strategy and its use of different commit-graphs would demonstrate over-
counting if the ahead_behind() method did not already account for that
possibility.
Also add tests for the specific for-each-ref, branch, and tag builtins.
In the case of 'git tag', there are intersting cases that happen when
some of the selected tips are not commits. This requires careful logic
around commits_nr in the second loop of filter_ahead_behind(). Also, the
test in t7004 is carefully located to avoid being dependent on the GPG
prereq. It also avoids using the test_commit helper, as that will add
ticks to the time and disrupt the expected timestamps in later tag
tests.
Also add performance tests in a new p1300-graph-walks.sh script. This
will be useful for more uses in the future, but for now compare the
ahead-behind counting algorithm in 'git for-each-ref' to the naive
implementation by running 'git rev-list --count' processes for each
input.
For the Git source code repository, the improvement is already obvious:
Test this tree
---------------------------------------------------------------
1500.2: ahead-behind counts: git for-each-ref 0.07(0.07+0.00)
1500.3: ahead-behind counts: git branch 0.07(0.06+0.00)
1500.4: ahead-behind counts: git tag 0.07(0.06+0.00)
1500.5: ahead-behind counts: git rev-list 1.32(1.04+0.27)
But the standard performance benchmark is the Linux kernel repository,
which demosntrates a significant improvement:
Test this tree
---------------------------------------------------------------
1500.2: ahead-behind counts: git for-each-ref 0.27(0.24+0.02)
1500.3: ahead-behind counts: git branch 0.27(0.24+0.03)
1500.4: ahead-behind counts: git tag 0.28(0.27+0.01)
1500.5: ahead-behind counts: git rev-list 4.57(4.03+0.54)
The 'git rev-list' test exists in this change as a demonstration, but it
will be removed in the next change to avoid wasting time on this
comparison.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test updates.
* hn/ref-api-tests-update:
t7004: use "test-tool ref-store" for reflog inspection
t7004: create separate tags for different tests
t5550: require REFFILES
t5540: require REFFILES
Reftable intentionally keeps reflog data for deleted refs.
This breaks tests that delete and recreate "refs/tags/tag_with_reflog" as traces
of the deletion are left in reflog. To resolve this, use a differently named ref
for each test case.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The top-level &&-chain checker built into t/test-lib.sh causes tests to
magically exit with code 117 if the &&-chain is broken. However, it has
the shortcoming that the magic does not work within `{...}` groups,
`(...)` subshells, `$(...)` substitutions, or within bodies of compound
statements, such as `if`, `for`, `while`, `case`, etc. `chainlint.sed`
partly fills in the gap by catching broken &&-chains in `(...)`
subshells, but bugs can still lurk behind broken &&-chains in the other
cases.
Fix broken &&-chains in compound statements in order to reduce the
number of possible lurking bugs.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
%(rest) is a atom used for cat-file batch mode, which can split
the input lines at the first whitespace boundary, all characters
before that whitespace are considered to be the object name;
characters after that first run of whitespace (i.e., the "rest"
of the line) are output in place of the %(rest) atom.
In order to let "cat-file --batch=%(rest)" use the ref-filter
interface, add %(rest) atom for ref-filter.
Introduce the reject_atom() to reject the atom %(rest) for
"git for-each-ref", "git branch", "git tag" and "git verify-tag".
Reviewed-by: Jacob Keller <jacob.keller@gmail.com>
Suggected-by: Jacob Keller <jacob.keller@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Removal of GIT_TEST_GETTEXT_POISON continues.
* ab/detox-gettext-tests:
tests: remove most uses of test_i18ncmp
tests: remove last uses of C_LOCALE_OUTPUT
tests: remove most uses of C_LOCALE_OUTPUT
tests: remove last uses of GIT_TEST_GETTEXT_POISON=false
Signed commits and tags now allow verification of objects, whose
two object names (one in SHA-1, the other in SHA-256) are both
signed.
* bc/signed-objects-with-both-hashes:
gpg-interface: remove other signature headers before verifying
ref-filter: hoist signature parsing
commit: allow parsing arbitrary buffers with headers
gpg-interface: improve interface for parsing tags
commit: ignore additional signatures when parsing signed commits
ref-filter: switch some uses of unsigned long to size_t
As a follow-up to d162b25f95 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp
via a simple s/test_i18ncmp/test_cmp/g search-replacement.
I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight
changes between "master" and "seen", as well as the prerequisite
itself due to other changes between "master" and "next/seen" which add
new test_i18ncmp uses.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have a multiply signed commit, we need to remove the signature
in the header before verifying the object, since the trailing signature
will not be over both pieces of data. Do so, and verify that we
validate the signature appropriately.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carefully excluding t7064, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t7[0-4]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t7[0-4]*.sh &&
git checkout HEAD -- t7064\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable ref-filter to process multiple merged and no-merged filters, and
extend functionality to git branch, git tag and git for-each-ref. This
provides an easy way to check for branches that are "graduation
candidates:"
$ git branch --no-merged master --merged next
If passed more than one merged (or more than one no-merged) filter, refs
must be reachable from any one of the merged commits, and reachable from
none of the no-merged commits.
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
change the advise call in tag library from advise() to
advise_if_enabled() to construct an example of the usage of
the new API.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
msgfile2 became unused with 3968658599 (Make builtin-tag.c use
parse_options., 2007-11-09), get rid of it.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We try to delete the non-existing tag "anothertag", but for the
verifications, we check that the tag "myhead" doesn't exist. "myhead"
isn't used in this test except for this checking. Comparing to the test
two tests earlier, it looks like a copy-paste mistake.
Perhaps it's overkill to check that `git tag -d` didn't decide to
*create* a tag. But since we're trying to be this careful, let's
actually check the correct tag. While we're doing this, let's use a more
descriptive tag name instead -- "nonexistingtag" should be obvious.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As many CI/CD tools don't allow to control command line options when
executing `git tag` command, a default value in the configuration file
will allow to enforce tag signing if required.
The new config-file option tag.gpgSign is added to define default behavior
of tag signings. To override default behavior the command line option -s,
--sign and --no-sign can be used:
$ git tag -m "commit message"
will generate a GPG signed tag if tag.gpgSign option is true, while
$ git tag --no-sign -m "commit message"
will skip the signing step.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In eea9c1e78f (tag: advise on nested tags, 2019-04-04), tag was taught
to hint at the user if a nested tag is made. However, this message had a
typo and it said "The object referred to by your new is...", which was
missing a "tag" after "new". Fix this message by adding the "tag".
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Robert Dailey reported confusion on the mailing list about a nested
tag which was most likely created by mistake. Jeff King noted that
this isn't a very common case and creating a tag-to-a-tag can be a
user-error.
Suggest that it may be a mistake with an advice message when
creating such a tag. Those who do want to create a tag that point
at another tag regularly can turn it off with the usual advice
mechanism.
Reported-by: Robert Dailey <rcdailey.lists@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
[jc: fixed test style and tweaked the log message]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test fixes.
* sg/test-must-be-empty:
tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
tests: use 'test_must_be_empty' instead of 'test_cmp /dev/null <out>'
tests: use 'test_must_be_empty' instead of 'test ! -s'
tests: use 'test_must_be_empty' instead of '! test -s'
Using 'test_must_be_empty' is shorter and more idiomatic than
>empty &&
test_cmp empty out
as it saves the creation of an empty file. Furthermore, sometimes the
expected empty file doesn't have such a descriptive name like 'empty',
and its creation is far away from the place where it's finally used
for comparison (e.g. in 't7600-merge.sh', where two expected empty
files are created in the 'setup' test, but are used only about 500
lines later).
These cases were found by instrumenting 'test_cmp' to error out the
test script when it's used to compare empty files, and then converted
manually.
Note that even after this patch there still remain a lot of cases
where we use 'test_cmp' to check empty files:
- Sometimes the expected output is not hard-coded in the test, but
'test_cmp' is used to ensure that two similar git commands produce
the same output, and that output happens to be empty, e.g. the
test 'submodule update --merge - ignores --merge for new
submodules' in 't7406-submodule-update.sh'.
- Repetitive common tasks, including preparing the expected results
and running 'test_cmp', are often extracted into a helper
function, and some of this helper's callsites expect no output.
- For the same reason as above, the whole 'test_expect_success'
block is within a helper function, e.g. in 't3070-wildmatch.sh'.
- Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update
(-p)' in 't9400-git-cvsserver-server.sh'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change various tests that use an idiom of the form:
>expect &&
test_cmp expect actual
To instead use:
test_must_be_empty actual
The test_must_be_empty() wrapper was introduced in ca8d148daf ("test:
test_must_be_empty helper", 2013-06-09). Many of these tests have been
added after that time. This was mostly found with, and manually pruned
from:
git grep '^\s+>.*expect.* &&$' t
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test cases to cover the new X509/gpgsm support. Most of them
resemble existing ones. They just switch the format to x509 and set the
signingkey when creating signatures. Validation of signatures does not
need any configuration of git, it does need gpgsm to be configured to
trust the key(-chain).
Several of the testcases build on top of existing gpg testcases.
The commit ships a self-signed key for committer@example.com and
configures gpgsm to trust it.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code did not propagate the terminal width to subprocesses via
COLUMNS environment variable, which it now does. This caused
trouble to "git column" helper subprocess when "git tag --column=row"
tried to list the existing tags on a display with non-default width.
* nd/term-columns:
column: fix off-by-one default width
pager: set COLUMNS to term_columns()
