The code path used when "git fetch" fetches from a bundle file
closed the same file descriptor twice, which sometimes broke things
unexpectedly when the file descriptor was reused, which has been
corrected.
* js/bundle-unbundle-fd-reuse-fix:
bundle: avoid closing file descriptor twice
Already when introduced in c7a8a16239 (Add bundle transport,
2007-09-10), the `bundle` transport had a bug where it would open a file
descriptor to the bundle file and then close it _twice_: First, the file
descriptor (`data->fd`) is passed to `unbundle()`, which would use it as
the `stdin` of the `index-pack` process, which as a consequence would
close it via `start_command()`. However, `data->fd` would still hold the
numerical value of the file descriptor, and `close_bundle()` would see
that and happily close it again.
This seems not to have caused too many problems in almost two decades,
but I encountered a situation today where it _does_ cause problems: In
i686 variants of Git for Windows, it seems that file descriptors are
reused quickly after they have been closed.
In the particular scenario I faced, `git fetch <bundle> <ref>` gets the
same file descriptor value when opening the bundle file and importing
its embedded packfile (which implicitly closes the file descriptor) and
then when opening a pack file in `fetch_and_consume_refs()` while
looking up an object's header.
Later on, after the bundle has been imported (and the `close_bundle()`
function erroneously closes the file descriptor that has _already_ been
closed when using it as `stdin` for `git index-pack`), the same file
descriptor value has now been reused via `use_pack()`. Now, when either
the recursive fetch (which defaults to "on", unfortunately) or a
commit-graph update needs to `mmap()` the packfile, it fails due to a
now-invalid file descriptor that _should_ point to the pack file but
doesn't anymore.
To fix that, let's invalidate `data->fd` after calling `unbundle()`.
That way, `close_bundle()` does not close a file descriptor that may
have been reused for something different. While at it, document that
`unbundle()` closes the file descriptor, and ensure that it also does
that when failing to verify the bundle.
Luckily, this bug does not affect the bundle URI feature, it only
affects the `git fetch <bundle>` code path.
Note that this patch does not _completely_ clarifies who is responsible
to close that file descriptor, as `run_command()` may fail _without_
closing `cmd->in`. Addressing this issue thoroughly, however, would
require a rather thorough re-design of the `start_command()` and
`finish_command()` functionality to make it a lot less murky who is
responsible for what file descriptors.
At least this here patch is relatively easy to reason about, and
addresses a hard failure (`fatal: mmap: could not determine filesize`)
at the expense of leaking a file descriptor under very rare
circumstances in which `git fetch` would error out anyway.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start working to make the codebase buildable with -Wsign-compare.
* ps/build-sign-compare:
t/helper: don't depend on implicit wraparound
scalar: address -Wsign-compare warnings
builtin/patch-id: fix type of `get_one_patchid()`
builtin/blame: fix type of `length` variable when emitting object ID
gpg-interface: address -Wsign-comparison warnings
daemon: fix type of `max_connections`
daemon: fix loops that have mismatching integer types
global: trivial conversions to fix `-Wsign-compare` warnings
pkt-line: fix -Wsign-compare warning on 32 bit platform
csum-file: fix -Wsign-compare warning on 32-bit platform
diff.h: fix index used to loop through unsigned integer
config.mak.dev: drop `-Wno-sign-compare`
global: mark code units that generate warnings with `-Wsign-compare`
compat/win32: fix -Wsign-compare warning in "wWinMain()"
compat/regex: explicitly ignore "-Wsign-compare" warnings
git-compat-util: introduce macros to disable "-Wsign-compare" warnings
Stop using `the_repository` in the "send-pack" subsystem by passing in a
repository when sending a packfile.
Adjust callers accordingly by using `the_repository`. While there may be
some callers that have a repository available in their context, this
trivial conversion allows for easier verification and bubbles up the use
of `the_repository` by one level.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ps/build-sign-compare:
t/helper: don't depend on implicit wraparound
scalar: address -Wsign-compare warnings
builtin/patch-id: fix type of `get_one_patchid()`
builtin/blame: fix type of `length` variable when emitting object ID
gpg-interface: address -Wsign-comparison warnings
daemon: fix type of `max_connections`
daemon: fix loops that have mismatching integer types
global: trivial conversions to fix `-Wsign-compare` warnings
pkt-line: fix -Wsign-compare warning on 32 bit platform
csum-file: fix -Wsign-compare warning on 32-bit platform
diff.h: fix index used to loop through unsigned integer
config.mak.dev: drop `-Wno-sign-compare`
global: mark code units that generate warnings with `-Wsign-compare`
compat/win32: fix -Wsign-compare warning in "wWinMain()"
compat/regex: explicitly ignore "-Wsign-compare" warnings
git-compat-util: introduce macros to disable "-Wsign-compare" warnings
We have a bunch of loops which iterate up to an unsigned boundary using
a signed index, which generates warnigs because we compare a signed and
unsigned value in the loop condition. Address these sites for trivial
cases and enable `-Wsign-compare` warnings for these code units.
This patch only adapts those code units where we can drop the
`DISABLE_SIGN_COMPARE_WARNINGS` macro in the same step.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching directly from a bundle, fsck message severity
configuration is not propagated to the underlying git-index-pack(1). It
is only capable of enabling or disabling fsck checks entirely. This does
not align with the fsck behavior for fetches through git-fetch-pack(1).
Use the fsck config parsing from fetch-pack to populate fsck message
severity configuration and wire it through to `unbundle()` to enable the
same fsck verification as done through fetch-pack.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `unbundle()` is invoked, fsck verification may be configured by
passing the `VERIFY_BUNDLE_FSCK` flag. This mechanism allows fsck checks
on the bundle to be enabled or disabled entirely. To facilitate more
fine-grained fsck configuration, additional context must be provided to
`unbundle()`.
Introduce the `unbundle_opts` type, which wraps the existing
`verify_bundle_flags`, to facilitate future extension of `unbundle()`
configuration. Also update `unbundle()` and its call sites to accept
this new options type instead of the flags directly. The end behavior is
functionally the same, but allows for the set of configurable options to
be extended. This is leveraged in a subsequent commit to enable fsck
message severity configuration.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Utilize the `server_options` from the corresponding remote during the
handshake in `transport.c` when Git protocol v2 is detected. This helps
initialize the `server_options` in `transport.h:transport` if no server
options are set for the transport (typically via `--server-option` or
`-o`).
While another potential place to incorporate server options from the
remote is in `transport.c:transport_get`, setting server options for a
transport using a protocol other than v2 could lead to unexpected errors
(see `transport.c:die_if_server_options`).
Relevant tests and documentation have been updated accordingly.
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the `parse_transport_option()` method to parse the `push.pushOption`
configuration. This method will also be used in the next commit to
handle the new `remote.<name>.serverOption` configuration for setting
server options in Git protocol v2.
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling `fetch_pack()` the caller is expected to pass in a set of
sought-after refs that they want to fetch. This array gets massaged to
not contain duplicate entries, which is done by replacing duplicate refs
with `NULL` pointers. This modifies the caller-provided array, and in
case we do unset any pointers the caller now loses track of that ref and
cannot free it anymore.
Now the obvious fix would be to not only unset these pointers, but to
also free their contents. But this doesn't work because callers continue
to use those refs. Another potential solution would be to copy the array
in `fetch_pack()` so that we dont modify the caller-provided one. But
that doesn't work either because the NULL-ness of those entries is used
by callers to skip over ref entries that we didn't even try to fetch in
`report_unmatched_refs()`.
Instead, we make it the responsibility of our callers to duplicate these
arrays as needed. It ain't pretty, but it works to plug the memory leak.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use of API functions that implicitly depend on the_repository
object in the config subsystem has been rewritten to pass a
repository object through the callchain.
* ps/config-wo-the-repository:
config: hide functions using `the_repository` by default
global: prepare for hiding away repo-less config functions
config: don't depend on `the_repository` with branch conditions
config: don't have setters depend on `the_repository`
config: pass repo to functions that rename or copy sections
config: pass repo to `git_die_config()`
config: pass repo to `git_config_get_expiry_in_days()`
config: pass repo to `git_config_get_expiry()`
config: pass repo to `git_config_get_max_percent_split_change()`
config: pass repo to `git_config_get_split_index()`
config: pass repo to `git_config_get_index_threads()`
config: expose `repo_config_clear()`
config: introduce missing setters that take repo as parameter
path: hide functions using `the_repository` by default
path: stop relying on `the_repository` in `worktree_git_path()`
path: stop relying on `the_repository` when reporting garbage
hooks: remove implicit dependency on `the_repository`
editor: do not rely on `the_repository` for interactive edits
path: expose `do_git_common_path()` as `repo_common_pathv()`
path: expose `do_git_path()` as `repo_git_pathv()`
We do not free negotiation tips in the transport's smart options. Fix
this by freeing them on disconnect.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In `fetch_refs_from_bundle()` we assemble a vector of arguments to pass
to `unbundle()`, but never free it. And in theory we wouldn't have to
because `unbundle()` already knows to free the vector for us. But it
fails to do so when it exits early due to `verify_bundle()` failing.
The calling convention that the arguments are freed by the callee and
not the caller feels somewhat weird. Refactor the code such that it is
instead the responsibility of the caller to free the vector, adapting
the only two callsites where we pass extra arguments. This also fixes
the memory leak.
This memory leak gets hit in t5510, but fixing it isn't sufficient to
make the whole test suite pass.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The transport data for the "git://" protocol contains two OID arrays
that we never free, creating a memory leak. Plug them.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We implicitly depend on `the_repository` in our hook subsystem because
we use `strbuf_git_path()` to compute hook paths. Remove this dependency
by accepting a `struct repository` as parameter instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Transport URLs can be prefixed with "foo::", which would tell us that
the transport uses a remote helper called "foo". We extract the helper
name by `xstrndup()`ing the prefix before the double-colons, but never
free that string.
Fix this leak by assigning the result to a separate local variable that
we can then free upon returning.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When bundleURI interface fetches multiple bundles, Git failed to
take full advantage of all bundles and ended up slurping duplicated
objects.
* xx/bundie-uri-fixes:
unbundle: extend object verification for fetches
fetch-pack: expose fsckObjects configuration logic
bundle-uri: verify oid before writing refs
Memory ownership rules for the in-core representation of
remote.*.url configuration values have been straightened out, which
resulted in a few leak fixes and code clarification.
* jk/remote-wo-url:
remote: drop checks for zero-url case
remote: always require at least one url in a remote
t5801: test remote.*.vcs config
t5801: make remote-testgit GIT_DIR setup more robust
remote: allow resetting url list
config: document remote.*.url/pushurl interaction
remote: simplify url/pushurl selection
remote: use strvecs to store remote url/pushurl
remote: transfer ownership of memory in add_url(), etc
remote: refactor alias_url() memory ownership
archive: fix check for missing url
The existing fetch.fsckObjects and transfer.fsckObjects configurations
were not fully applied to bundle-involved fetches, including direct
bundle fetches and bundle-uri enabled fetches. Furthermore, there was no
object verification support for unbundle.
This commit extends object verification support in `bundle.c:unbundle`
by adding the `VERIFY_BUNDLE_FSCK` option to `verify_bundle_flags`. When
this option is enabled, we append the `--fsck-objects` flag to
`git-index-pack`.
The `VERIFY_BUNDLE_FSCK` option is now used by bundle-involved fetches,
where we use `fetch-pack.c:fetch_pack_fsck_objects` to determine whether
to enable this option for `bundle.c:unbundle`, specifically in:
- `transport.c:fetch_refs_from_bundle` for direct bundle fetches.
- `bundle-uri.c:unbundle_from_file` for bundle-uri enabled fetches.
This addition ensures a consistent logic for object verification during
fetches. Tests have been added to confirm functionality in the scenarios
mentioned above.
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use of the `the_repository` variable is deprecated nowadays, and we
slowly but steadily convert the codebase to not use it anymore. Instead,
callers should be passing down the repository to work on via parameters.
It is hard though to prove that a given code unit does not use this
variable anymore. The most trivial case, merely demonstrating that there
is no direct use of `the_repository`, is already a bit of a pain during
code reviews as the reviewer needs to manually verify claims made by the
patch author. The bigger problem though is that we have many interfaces
that implicitly rely on `the_repository`.
Introduce a new `USE_THE_REPOSITORY_VARIABLE` macro that allows code
units to opt into usage of `the_repository`. The intent of this macro is
to demonstrate that a certain code unit does not use this variable
anymore, and to keep it from new dependencies on it in future changes,
be it explicit or implicit
For now, the macro only guards `the_repository` itself as well as
`the_hash_algo`. There are many more known interfaces where we have an
implicit dependency on `the_repository`, but those are not guarded at
the current point in time. Over time though, we should start to add
guards as required (or even better, just remove them).
Define the macro as required in our code units. As expected, most of our
code still relies on the global variable. Nearly all of our builtins
rely on the variable as there is no way yet to pass `the_repository` to
their entry point. For now, declare the macro in "biultin.h" to keep the
required changes at least a little bit more contained.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the previous commit removed the possibility that a "struct
remote" will ever have zero url fields, we can drop a number of
redundant checks and untriggerable code paths.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the url/pushurl fields of "struct remote" own their strings, we
can switch from bare arrays to strvecs. This has a few advantages:
- push/clear are now one-liners
- likewise the free+assigns in alias_all_urls() can use
strvec_replace()
- we now use size_t for storage, avoiding possible overflow
- this will enable some further cleanups in future patches
There's quite a bit of fallout in the code that reads these fields, as
it tends to access these arrays directly. But it's mostly a mechanical
replacement of "url_nr" with "url.nr", and "url[i]" with "url.v[i]",
with a few variations (e.g. "*url" could become "*url.v", but I used
"url.v[0]" for consistency).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When initializing the transport helper in `transport_get()`, we
allocate the name of the helper. We neither end up transferring
ownership of the name, nor do we free it. The associated memory thus
leaks.
Fix this memory leak by freeing the string at the calling side in
`transport_get()`. `transport_helper_init()` now creates its own copy of
the string and thus can free it as required.
An alterantive way to fix this would be to transfer ownership of the
string passed into `transport_helper_init()`, which would avoid the call
to xstrdup(1). But it does make for a more surprising calling convention
as we do not typically transfer ownership of strings like this.
Mark now-passing tests as leak free.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the rules that rewrite callers of "refs" interfaces to explicitly
pass `struct ref_store`. The resulting patch has been applied with the
`--whitespace=fix` option.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Comment updates to help developers not to attempt to modify
messages from plumbing commands that must stay constant.
It might make sense to reassess the plumbing needs every few years,
but that should be done as a separate effort.
* es/some-up-to-date-messages-must-stay:
messages: mark some strings with "up-to-date" not to touch
The treewide clean-up of "up-to-date" strings done in 7560f547
(treewide: correct several "up-to-date" to "up to date", 2017-08-23)
deliberately left some out, but unlike the lines that were changed
by the commit, the lines that were deliberately left untouched by
the commit is impossible to ask "git blame" to link back to the
commit that did not touch them.
Let's do the second best thing, leave a short comment near them
explaining why those strings should not be modified or localized.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[es: make in-code comment more developer-friendly]
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
alloc_nr, ALLOC_GROW, and ALLOC_GROW_BY are commonly used macros for
dynamic array allocation. Moving these macros to git-compat-util.h with
the other alloc macros focuses alloc.[ch] to allocation for Git objects
and additionally allows us to remove inclusions to alloc.h from files
that solely used the above macros.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The vast majority of files including object-store.h did not need dir.h
nor khash.h. Split the header into two files, and let most just depend
upon object-store-ll.h, while letting the two callers that need it
depend on the full object-store.h.
After this patch:
$ git grep -h include..object-store | sort | uniq -c
2 #include "object-store.h"
129 #include "object-store-ll.h"
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to parse capability list for v0 on-wire protocol fell into
an infinite loop when a capability appears multiple times, which
has been corrected.
* jk/protocol-cap-parse-fix:
v0 protocol: use size_t for capability length/offset
t5512: test "ls-remote --heads --symref" filtering with v0 and v2
t5512: allow any protocol version for filtered symref test
t5512: add v2 support for "ls-remote --symref" test
v0 protocol: fix sha1/sha256 confusion for capabilities^{}
t5512: stop referring to "v1" protocol
v0 protocol: fix infinite loop when parsing multi-valued capabilities
Header clean-up.
* en/header-split-cache-h: (24 commits)
protocol.h: move definition of DEFAULT_GIT_PORT from cache.h
mailmap, quote: move declarations of global vars to correct unit
treewide: reduce includes of cache.h in other headers
treewide: remove double forward declaration of read_in_full
cache.h: remove unnecessary includes
treewide: remove cache.h inclusion due to pager.h changes
pager.h: move declarations for pager.c functions from cache.h
treewide: remove cache.h inclusion due to editor.h changes
editor: move editor-related functions and declarations into common file
treewide: remove cache.h inclusion due to object.h changes
object.h: move some inline functions and defines from cache.h
treewide: remove cache.h inclusion due to object-file.h changes
object-file.h: move declarations for object-file.c functions from cache.h
treewide: remove cache.h inclusion due to git-zlib changes
git-zlib: move declarations for git-zlib functions from cache.h
treewide: remove cache.h inclusion due to object-name.h changes
object-name.h: move declarations for object-name.c functions from cache.h
treewide: remove unnecessary cache.h inclusion
treewide: be explicit about dependence on mem-pool.h
treewide: be explicit about dependence on oid-array.h
...
When parsing server capabilities, we use "int" to store lengths and
offsets. At first glance this seems like a spot where our parser may be
confused by integer overflow if somebody sent us a malicious response.
In practice these strings are all bounded by the 64k limit of a
pkt-line, so using "int" is OK. However, it makes the code simpler to
audit if they just use size_t everywhere. Note that because we take
these parameters as pointers, this also forces many callers to update
their declared types.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of advice functions, without explicitly
including advice.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
advice.h if they are using it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of trace and trace2 functions, without
explicitly including trace.h or trace2.h. This made it more difficult
to find which files could remove a dependence on cache.h. Make C files
explicitly include trace.h or trace2.h if they are using them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split key function and data structure definitions out of cache.h to
new header files and adjust the users.
* en/header-split-cleanup:
csum-file.h: remove unnecessary inclusion of cache.h
write-or-die.h: move declarations for write-or-die.c functions from cache.h
treewide: remove cache.h inclusion due to setup.h changes
setup.h: move declarations for setup.c functions from cache.h
treewide: remove cache.h inclusion due to environment.h changes
environment.h: move declarations for environment.c functions from cache.h
treewide: remove unnecessary includes of cache.h
wrapper.h: move declarations for wrapper.c functions from cache.h
path.h: move function declarations for path.c functions from cache.h
cache.h: remove expand_user_path()
abspath.h: move absolute path functions from cache.h
environment: move comment_line_char from cache.h
treewide: remove unnecessary cache.h inclusion from several sources
treewide: remove unnecessary inclusion of gettext.h
treewide: be explicit about dependence on gettext.h
treewide: remove unnecessary cache.h inclusion from a few headers
Code clean-up around the use of the_repository.
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
More "-Wunused-parameters" code clean-up.
* jk/unused-post-2.40:
transport: mark unused parameters in fetch_refs_from_bundle()
http: mark unused parameter in fill_active_slot() callbacks
http: drop unused parameter from start_object_request()
mailmap: drop debugging code
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
Transports that do not support protocol v2 did not correctly fall
back to protocol v0 under certain conditions, which has been
corrected.
* jk/fix-proto-downgrade-to-v0:
git_connect(): fix corner cases in downgrading v2 to v0
Apply the part of "the_repository.pending.cocci" pertaining to
"cache.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since a64215b6cd ("object.h: stop depending on cache.h; make
cache.h depend on object.h", 2023-02-24), we have a few headers that
could have replaced their include of cache.h with an include of
object.h. Make that change now.
Some C files had to start including cache.h after this change (or some
smaller header it had brought in), because the C files were depending
on things from cache.h but were only formerly implicitly getting
cache.h through one of these headers being modified in this patch.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's code in git_connect() that checks whether we are doing a push
with protocol_v2, and if so, drops us to protocol_v0 (since we know
how to do v2 only for fetches). But it misses some corner cases:
1. it checks the "prog" variable, which is actually the path to
receive-pack on the remote side. By default this is just
"git-receive-pack", but it could be an arbitrary string (like
"/path/to/git receive-pack", etc). We'd accidentally stay in v2
mode in this case.
2. besides "receive-pack" and "upload-pack", there's one other value
we'd expect: "upload-archive" for handling "git archive --remote".
Like receive-pack, this doesn't understand v2, and should use the
v0 protocol.
In practice, neither of these causes bugs in the real world so far. We
do send a "we understand v2" probe to the server, but since no server
implements v2 for anything but upload-pack, it's simply ignored. But
this would eventually become a problem if we do implement v2 for those
endpoints, as older clients would falsely claim to understand it,
leading to a server response they can't parse.
We can fix (1) by passing in both the program path and the "name" of the
operation. I treat the name as a string here, because that's the pattern
set in transport_connect(), which is one of our callers (we were simply
throwing away the "name" value there before).
We can fix (2) by allowing only known-v2 protocols ("upload-pack"),
rather than blocking unknown ones ("receive-pack" and "upload-archive").
That will mean whoever eventually implements v2 push will have to adjust
this list, but that's reasonable. We'll do the safe, conservative thing
(sticking to v0) by default, and anybody working on v2 will quickly
realize this spot needs to be updated.
The new tests cover the receive-pack and upload-archive cases above, and
re-confirm that we allow v2 with an arbitrary "--upload-pack" path (that
already worked before this patch, of course, but it would be an easy
thing to break if we flipped the allow/block logic without also handling
"name" separately).
Here are a few miscellaneous implementation notes, since I had to do a
little head-scratching to understand who calls what:
- transport_connect() is called only for git-upload-archive. For
non-http git remotes, that resolves to the virtual connect_git()
function (which then calls git_connect(); confused yet?). So
plumbing through "name" in connect_git() covers that.
- for regular fetches and pushes, callers use higher-level functions
like transport_fetch_refs(). For non-http git remotes, that means
calling git_connect() under the hood via connect_setup(). And that
uses the "for_push" flag to decide which name to use.
- likewise, plumbing like fetch-pack and send-pack may call
git_connect() directly; they each know which name to use.
- for remote helpers (including http), we already have separate
parameters for "name" and "exec" (another name for "prog"). In
process_connect_service(), we feed the "name" to the helper via
"connect" or "stateless-connect" directives.
There's also a "servpath" option, which can be used to tell the
helper about the "exec" path. But no helpers we implement support
it! For http it would be useless anyway (no reasonable server
implementation will allow you to send a shell command to run the
server). In theory it would be useful for more obscure helpers like
remote-ext, but even there it is not implemented.
It's tempting to get rid of it simply to reduce confusion, but we
have publicly documented it since it was added in fa8c097cc9
(Support remote helpers implementing smart transports, 2009-12-09),
so it's possible some helper in the wild is using it.
- So for v2, helpers (again, including http) are mainly used via
stateless-connect, driven by the main program. But they do still
need to decide whether to do a v2 probe. And so there's similar
logic in remote-curl.c's discover_refs() that looks for
"git-receive-pack". But it's not buggy in the same way. Since it
doesn't support servpath, it is always dealing with a "service"
string like "git-receive-pack". And since it doesn't support
straight "connect", it can't be used for "upload-archive".
So we could leave that spot alone. But I've updated it here to match
the logic we're changing in connect_git(). That seems like the least
confusing thing for somebody who has to touch both of these spots
later (say, to add v2 push support). I didn't add a new test to make
sure this doesn't break anything; we already have several tests (in
t5551 and elsewhere) that make sure we are using v2 over http.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>