* maint-2.38: (32 commits)
Git 2.38.5
Git 2.37.7
Git 2.36.6
Git 2.35.8
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
...
* maint-2.37: (31 commits)
Git 2.37.7
Git 2.36.6
Git 2.35.8
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
...
* maint-2.36: (30 commits)
Git 2.36.6
Git 2.35.8
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
...
* maint-2.35: (29 commits)
Git 2.35.8
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
...
* maint-2.34: (28 commits)
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
...
* maint-2.33: (27 commits)
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
...
* maint-2.32: (26 commits)
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
ci: install python on ubuntu
...
* maint-2.31: (25 commits)
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
ci: install python on ubuntu
ci: use the same version of p4 on both Linux and macOS
...
* maint-2.30: (23 commits)
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
ci: install python on ubuntu
ci: use the same version of p4 on both Linux and macOS
ci: remove the pipe after "p4 -V" to catch errors
github-actions: run gcc-8 on ubuntu-20.04 image
...
When sending patch series (with a cover-letter or not)
sendemail-validate is called with every email/patch file independently
from the others. When one of the patches depends on a previous one, it
may not be possible to use this hook in a meaningful way. A hook that
wants to check some property of the whole series needs to know which
patch is the final one.
Expose the current and total number of patches to the hook via the
GIT_SENDEMAIL_PATCH_COUNTER and GIT_SENDEMAIL_PATCH_TOTAL environment
variables so that both incremental and global validation is possible.
Sharing any other state between successive invocations of the validate
hook must be done via external means. For example, by storing it in
a git config sendemail.validateWorktree entry.
Add a sample script with placeholder validations and update tests to
check that the counters are properly exported.
Suggested-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Robin Jarry <robin@jarry.cc>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
manpages expect the date of the last revision, if that is not found
DocBook Stylesheets go through a series of hacks to generate one with
the format `%d/%d/%Y` which is not ideal.
In addition to this format not being standard, different tools generate
dates with different formats.
There's no need for any confusion if we specify the revision date, so
let's do so.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the given format string expands to the empty string, a newline is
still printed. This makes using the output linewise more tedious. For
example, git update-ref --stdin does not accept empty lines.
Add options to "git branch", "git for-each-ref", and "git tag" to
not print these empty lines. The default behavior remains the same.
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back in e37d0b8730 (builtin/index-pack.c: write reverse indexes,
2021-01-25), Git learned how to read and write a pack's reverse index
from a file instead of in-memory.
A pack's reverse index is a mapping from pack position (that is, the
order that objects appear together in a ".pack") to their position in
lexical order (that is, the order that objects are listed in an ".idx"
file).
Reverse indexes are consulted often during pack-objects, as well as
during auxiliary operations that require mapping between pack offsets,
pack order, and index index.
They are useful in GitHub's infrastructure, where we have seen a
dramatic increase in performance when writing ".rev" files[1]. In
particular:
- an ~80% reduction in the time it takes to serve fetches on a popular
repository, Homebrew/homebrew-core.
- a ~60% reduction in the peak memory usage to serve fetches on that
same repository.
- a collective savings of ~35% in CPU time across all pack-objects
invocations serving fetches across all repositories in a single
datacenter.
Reverse indexes are also beneficial to end-users as well as forges. For
example, the time it takes to generate a pack containing the objects for
the 10 most recent commits in linux.git (representing a typical push) is
significantly faster when on-disk reverse indexes are available:
$ { git rev-parse HEAD && printf '^' && git rev-parse HEAD~10 } >in
$ hyperfine -L v false,true 'git.compile -c pack.readReverseIndex={v} pack-objects --delta-base-offset --revs --stdout <in >/dev/null'
Benchmark 1: git.compile -c pack.readReverseIndex=false pack-objects --delta-base-offset --revs --stdout <in >/dev/null
Time (mean ± σ): 543.0 ms ± 20.3 ms [User: 616.2 ms, System: 58.8 ms]
Range (min … max): 521.0 ms … 577.9 ms 10 runs
Benchmark 2: git.compile -c pack.readReverseIndex=true pack-objects --delta-base-offset --revs --stdout <in >/dev/null
Time (mean ± σ): 245.0 ms ± 11.4 ms [User: 335.6 ms, System: 31.3 ms]
Range (min … max): 226.0 ms … 259.6 ms 13 runs
Summary
'git.compile -c pack.readReverseIndex=true pack-objects --delta-base-offset --revs --stdout <in >/dev/null' ran
2.22 ± 0.13 times faster than 'git.compile -c pack.readReverseIndex=false pack-objects --delta-base-offset --revs --stdout <in >/dev/null'
The same is true of writing a pack containing the objects for the 30
most-recent commits:
$ { git rev-parse HEAD && printf '^' && git rev-parse HEAD~30 } >in
$ hyperfine -L v false,true 'git.compile -c pack.readReverseIndex={v} pack-objects --delta-base-offset --revs --stdout <in >/dev/null'
Benchmark 1: git.compile -c pack.readReverseIndex=false pack-objects --delta-base-offset --revs --stdout <in >/dev/null
Time (mean ± σ): 866.5 ms ± 16.2 ms [User: 1414.5 ms, System: 97.0 ms]
Range (min … max): 839.3 ms … 886.9 ms 10 runs
Benchmark 2: git.compile -c pack.readReverseIndex=true pack-objects --delta-base-offset --revs --stdout <in >/dev/null
Time (mean ± σ): 581.6 ms ± 10.2 ms [User: 1181.7 ms, System: 62.6 ms]
Range (min … max): 567.5 ms … 599.3 ms 10 runs
Summary
'git.compile -c pack.readReverseIndex=true pack-objects --delta-base-offset --revs --stdout <in >/dev/null' ran
1.49 ± 0.04 times faster than 'git.compile -c pack.readReverseIndex=false pack-objects --delta-base-offset --revs --stdout <in >/dev/null'
...and savings on trivial operations like computing the on-disk size of
a single (packed) object are even more dramatic:
$ git rev-parse HEAD >in
$ hyperfine -L v false,true 'git.compile -c pack.readReverseIndex={v} cat-file --batch-check="%(objectsize:disk)" <in'
Benchmark 1: git.compile -c pack.readReverseIndex=false cat-file --batch-check="%(objectsize:disk)" <in
Time (mean ± σ): 305.8 ms ± 11.4 ms [User: 264.2 ms, System: 41.4 ms]
Range (min … max): 290.3 ms … 331.1 ms 10 runs
Benchmark 2: git.compile -c pack.readReverseIndex=true cat-file --batch-check="%(objectsize:disk)" <in
Time (mean ± σ): 4.0 ms ± 0.3 ms [User: 1.7 ms, System: 2.3 ms]
Range (min … max): 1.6 ms … 4.6 ms 1155 runs
Summary
'git.compile -c pack.readReverseIndex=true cat-file --batch-check="%(objectsize:disk)" <in' ran
76.96 ± 6.25 times faster than 'git.compile -c pack.readReverseIndex=false cat-file --batch-check="%(objectsize:disk)" <in'
In the more than two years since e37d0b8730 was merged, Git's
implementation of on-disk reverse indexes has been thoroughly tested,
both from users enabling `pack.writeReverseIndexes`, and from GitHub's
deployment of the feature. The latter has been running without incident
for more than two years.
This patch changes Git's behavior to write on-disk reverse indexes by
default when indexing a pack, which should make the above operations
faster for everybody's Git installation after a repack.
(The previous commit explains some potential drawbacks of using on-disk
reverse indexes in certain limited circumstances, that essentially boil
down to a trade-off between time to generate, and time to access. For
those limited cases, the `pack.readReverseIndex` escape hatch can be
used).
[1]: https://github.blog/2021-04-29-scaling-monorepo-maintenance/#reverse-indexes
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1615c567b8 (Documentation/config/pack.txt: advertise
'pack.writeReverseIndex', 2021-01-25), we have had the
`pack.writeReverseIndex` configuration option, which tells Git whether
or not it is allowed to write a ".rev" file when indexing a pack.
Introduce a complementary configuration knob, `pack.readReverseIndex` to
control whether or not Git will read any ".rev" file(s) that may be
available on disk.
This option is useful for debugging, as well as disabling the effect of
".rev" files in certain instances.
This is useful because of the trade-off[^1] between the time it takes to
generate a reverse index (slow from scratch, fast when reading an
existing ".rev" file), and the time it takes to access a record (the
opposite).
For example, even though it is faster to use the on-disk reverse index
when computing the on-disk size of a packed object, it is slower to
enumerate the same value for all objects.
Here are a couple of examples from linux.git. When computing the above
for a single object, using the on-disk reverse index is significantly
faster:
$ git rev-parse HEAD >in
$ hyperfine -L v false,true 'git.compile -c pack.readReverseIndex={v} cat-file --batch-check="%(objectsize:disk)" <in'
Benchmark 1: git.compile -c pack.readReverseIndex=false cat-file --batch-check="%(objectsize:disk)" <in
Time (mean ± σ): 302.5 ms ± 12.5 ms [User: 258.7 ms, System: 43.6 ms]
Range (min … max): 291.1 ms … 328.1 ms 10 runs
Benchmark 2: git.compile -c pack.readReverseIndex=true cat-file --batch-check="%(objectsize:disk)" <in
Time (mean ± σ): 3.9 ms ± 0.3 ms [User: 1.6 ms, System: 2.4 ms]
Range (min … max): 2.0 ms … 4.4 ms 801 runs
Summary
'git.compile -c pack.readReverseIndex=true cat-file --batch-check="%(objectsize:disk)" <in' ran
77.29 ± 7.14 times faster than 'git.compile -c pack.readReverseIndex=false cat-file --batch-check="%(objectsize:disk)" <in'
, but when instead trying to compute the on-disk object size for all
objects in the repository, using the ".rev" file is a disadvantage over
creating the reverse index from scratch:
$ hyperfine -L v false,true 'git.compile -c pack.readReverseIndex={v} cat-file --batch-check="%(objectsize:disk)" --batch-all-objects'
Benchmark 1: git.compile -c pack.readReverseIndex=false cat-file --batch-check="%(objectsize:disk)" --batch-all-objects
Time (mean ± σ): 8.258 s ± 0.035 s [User: 7.949 s, System: 0.308 s]
Range (min … max): 8.199 s … 8.293 s 10 runs
Benchmark 2: git.compile -c pack.readReverseIndex=true cat-file --batch-check="%(objectsize:disk)" --batch-all-objects
Time (mean ± σ): 16.976 s ± 0.107 s [User: 16.706 s, System: 0.268 s]
Range (min … max): 16.839 s … 17.105 s 10 runs
Summary
'git.compile -c pack.readReverseIndex=false cat-file --batch-check="%(objectsize:disk)" --batch-all-objects' ran
2.06 ± 0.02 times faster than 'git.compile -c pack.readReverseIndex=true cat-file --batch-check="%(objectsize:disk)" --batch-all-objects'
Luckily, the results when running `git cat-file` with `--unordered` are
closer together:
$ hyperfine -L v false,true 'git.compile -c pack.readReverseIndex={v} cat-file --unordered --batch-check="%(objectsize:disk)" --batch-all-objects'
Benchmark 1: git.compile -c pack.readReverseIndex=false cat-file --unordered --batch-check="%(objectsize:disk)" --batch-all-objects
Time (mean ± σ): 5.066 s ± 0.105 s [User: 4.792 s, System: 0.274 s]
Range (min … max): 4.943 s … 5.220 s 10 runs
Benchmark 2: git.compile -c pack.readReverseIndex=true cat-file --unordered --batch-check="%(objectsize:disk)" --batch-all-objects
Time (mean ± σ): 6.193 s ± 0.069 s [User: 5.937 s, System: 0.255 s]
Range (min … max): 6.145 s … 6.356 s 10 runs
Summary
'git.compile -c pack.readReverseIndex=false cat-file --unordered --batch-check="%(objectsize:disk)" --batch-all-objects' ran
1.22 ± 0.03 times faster than 'git.compile -c pack.readReverseIndex=true cat-file --unordered --batch-check="%(objectsize:disk)" --batch-all-objects'
Because the equilibrium point between these two is highly machine- and
repository-dependent, allow users to configure whether or not they will
read any ".rev" file(s) with this configuration knob.
[^1]: Generating a reverse index in memory takes O(N) time (where N is
the number of objects in the repository), since we use a radix sort.
Reading an entry from an on-disk ".rev" file is slower since each
operation is bound by disk I/O instead of memory I/O.
In order to compute the on-disk size of a packed object, we need to
find the offset of our object, and the adjacent object (the on-disk
size difference of these two). Finding the first offset requires a
binary search. Finding the latter involves a single .rev lookup.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consistently spell "Message-ID" as such, not "Message-Id".
* jc/spell-id-in-both-caps-in-message-id:
e-mail workflow: Message-ID is spelled with ID in both capital letters
"git sparse-checkout" command learns a debugging aid for the sparse
rule definitions.
* ws/sparse-check-rules:
builtin/sparse-checkout: add check-rules command
builtin/sparse-checkout: remove NEED_WORK_TREE flag
6f054f9fb3 (builtin/clone.c: disallow --local clones with
symlinks, 2022-07-28) gives a good error message when "git clone
--local" fails when the repo to clone has symlinks in
"$GIT_DIR/objects". In bffc762f87 (dir-iterator: prevent top-level
symlinks without FOLLOW_SYMLINKS, 2023-01-24), we later extended this
restriction to the case where "$GIT_DIR/objects" is itself a symlink,
but we didn't update the error message then - bffc762f87's tests show
that we print a generic "failed to start iterator over" message.
This is exacerbated by the fact that Documentation/git-clone.txt
mentions neither restriction, so users are left wondering if this is
intentional behavior or not.
Fix this by adding a check to builtin/clone.c: when doing a local clone,
perform an extra check to see if "$GIT_DIR/objects" is a symlink, and if
so, assume that that was the reason for the failure and report the
relevant information. Ideally, dir_iterator_begin() would tell us that
the real failure reason is the presence of the symlink, but (as far as I
can tell) there isn't an appropriate errno value for that.
Also, update Documentation/git-clone.txt to reflect that this
restriction exists.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hacks to add version information to the man pages comes from 2007
7ef195ba3e (Documentation: Add version information to man pages,
2007-03-25). In that code we passed three fields to DocBook Stylesheets:
`source`, `version`, and `manual`, however, all the stylesheets do is
join the strings `source` and `version` [1].
Their own documentation explains that in pracice the source is just a
combination of two fields [2]:
In practice, there are many pages that simply have a version number in
the "source" field.
Splitting that information might have seemed more proper in 2007, but it
not achieve anything in practice.
Asciidoctor had support for this information in their manpage backend
since day 1: v1.5.3 (2015), but it didn't include the version. In the
docbook5 backend they did in v1.5.7 (2018), but again: no version.
There is no need for us to demand that that they add support for the
version field when in reality all that is going to happen is that both
fields are going to be joined.
Let's do that ourselves so we can forget about all our hacks for this
and so it works for both asciidoc.py, and docbook5 and manpage backends
of asciidoctor.
[1] https://github.com/docbook/xslt10-stylesheets/blob/master/xsl/common/refentry.xsl#L545
[2] https://docbook.sourceforge.net/release/xsl/current/doc/common/template.get.refentry.source.html
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git for-each-ref" learns '%(ahead-behind:<base>)' that computes the
distances from a single reference point in the history with bunch
of commits in bulk.
* ds/ahead-behind:
commit-reach: add tips_reachable_from_bases()
for-each-ref: add ahead-behind format atom
commit-reach: implement ahead_behind() logic
commit-graph: introduce `ensure_generations_valid()`
commit-graph: return generation from memory
commit-graph: simplify compute_generation_numbers()
commit-graph: refactor compute_topological_levels()
for-each-ref: explicitly test no matches
for-each-ref: add --stdin option
In 2007 we added a custom header macro to provide version information
7ef195ba3e (Documentation: Add version information to man pages,
2007-03-25),
However, in 2008 asciidoc added the attributes to do this properly [1].
This was not implemented in Git until 2019: 226daba280 (Doc/Makefile:
give mansource/-version/-manual attributes, 2019-09-16).
But in 2023 we are doing it properly, so there's no need for the custom
macro.
[1] https://github.com/asciidoc-py/asciidoc-py/commit/ad78a3c
Cc: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When no merge.tool or diff.tool is configured or manually selected, the
selection of a default tool is sensitive to the DISPLAY variable; in a
GUI session a gui-specific tool will be proposed if found, and
otherwise a terminal-based one. This "GUI-optimizing" behavior is
important because a GUI can make a huge difference to a user's ability
to understand and correctly complete a non-trivial conflicting merge.
Some time ago the merge.guitool and diff.guitool config options were
introduced to enable users to configure both a GUI tool, and a non-GUI
tool (with fallback if no GUI tool configured), in the same environment.
Unfortunately, the --gui argument introduced to support the selection of
the guitool is still explicit. When using configured tools, there is no
equivalent of the no-tool-configured "propose a GUI tool if we are in a GUI
environment" behavior.
As proposed in <xmqqmtb8jsej.fsf@gitster.g>, introduce new configuration
options, difftool.guiDefault and mergetool.guiDefault, supporting a special
value "auto" which causes the corresponding tool or guitool to be selected
depending on the presence of a non-empty DISPLAY value. Also support "true"
to say "default to the guitool (unless --no-gui is passed on the
commandline)", and "false" as the previous default behavior when these new
configuration options are not specified.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Acked-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without the word "the", the sentence is a little harder to read. The
word "the" makes it clearer that the comment refers to discrete patches,
and not portions of individual patches.
Signed-off-by: Daniel Watson <ozzloy@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 50d9bbba92 (Documentation: Avoid use of xmlto --stringparam,
2009-12-04) introduced manpage-base-url.xsl because ancient versions of
xmlto did not have --stringparam.
However, that was more than ten years ago, no need for that complexity
anymore, we can just use --stringparam.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document what the pathname-looking strings in "rev-list --object"
output are for and what they mean.
* jk/document-rev-list-object-name:
docs: document caveats of rev-list's object-name output
"git blame --contents=<file> <rev> -- <path>" used to be forbidden,
but now it finds the origins of lines starting at <file> contents
through the history that leads to <rev>.
* jk/blame-contents-with-arbitrary-commit:
blame: allow --contents to work with non-HEAD commit
Streamline --rebase-merges command line option handling and
introduce rebase.merges configuration variable.
* ah/rebase-merges-config:
rebase: add a config option for --rebase-merges
rebase: deprecate --rebase-merges=""
rebase: add documentation and test for --no-rebase-merges
We used to write "Message-Id:" and "Message-ID:" pretty much
interchangeably, and the header name is defined to be case
insensitive by the RFCs, but the canonical form "Message-ID:" is
used throughout the RFC documents, so let's imitate it ourselves.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
