Doc fixes.
* ja/misc-doc-fixes:
doc: fix the bnf like style of some commands
doc: git-remote fix ups
doc: use linkgit macro where needed.
git-bisect-lk2009: make continuation of list indented
Hotfix and clean-up for the jt/threaded-index-pack topic that has
graduated to v2.29-rc0.
* jk/index-pack-hotfixes:
index-pack: make get_base_data() comment clearer
index-pack: drop type_cas mutex
index-pack: restore "resolving deltas" progress meter
In command line options, variables are entered between < and >
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The auto condition for the commit-graph maintenance task walks refs
looking for commits that are not in the commit-graph file. This was
added in 4ddc79b2 (maintenance: add auto condition for commit-graph
task, 2020-09-17) but was left untested.
The initial goal of this change was to demonstrate the feature works
properly by adding tests. However, there was an off-by-one error that
caused the basic tests around maintenance.commit-graph.auto=1 to fail
when it should work.
The subtlety is that if a ref tip is not in the commit-graph, then we
were not adding that to the total count. In the test, we see that we
have only added one commit since our last commit-graph write, so the
auto condition would say there is nothing to do.
The fix is simple: add the check for the commit-graph position to see
that the tip is not in the commit-graph file before starting our walk.
Since this happens before adding to the DFS stack, we do not need to
clear our (currently empty) commit list.
This does add some extra complexity for the test, because we also want
to verify that the walk along the parents actually does some work. This
means we need to add at least two commits in a row without writing the
commit-graph. However, we also need to make sure no additional refs are
pointing to the middle of this list or else the for_each_ref() in
should_write_commit_graph() might visit these commits as tips instead of
doing a DFS walk. Hence, the last two commits are added with "git
commit" instead of "test_commit".
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current behavior of git checkout/switch is that --guess is currently
enabled by default. However, some users may not wish for this to happen
automatically. Instead of forcing users to specify --no-guess manually
each time, teach these commands the checkout.guess configuration
variable that gives users the option to set a default behavior.
Teach the completion script to recognize the new config variable and
disable DWIM logic if it is set to false.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A comment mentions that we may free cached delta bases via
find_unresolved_deltas(), but that function went away in f08cbf60fe
(index-pack: make quantum of work smaller, 2020-09-08). Since we need to
rewrite that comment anyway, make the entire comment clearer.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The type_cas lock lost all of its callers in f08cbf60fe (index-pack:
make quantum of work smaller, 2020-09-08), so we can safely delete it.
The compiler didn't alert us that the variable became unused, because we
still call pthread_mutex_init() and pthread_mutex_destroy() on it.
It's worth considering also whether that commit was in error to remove
the use of the lock. Why don't we need it now, if we did before, as
described in ab791dd138 (index-pack: fix race condition with duplicate
bases, 2014-08-29)? I think the answer is that we now look at and assign
the child_obj->real_type field in the main thread while holding the
work_lock(). So we don't have to worry about racing with the worker
threads.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit f08cbf60fe (index-pack: make quantum of work smaller, 2020-09-08)
refactored the main loop in threaded_second_pass(), but also deleted the
call to display_progress() at the top of the loop. This means that users
typically see no progress at all during the delta resolution phase (and
for large repositories, Git appears to hang).
This looks like an accident that was unrelated to the intended change of
that commit, since we continue to update nr_resolved_deltas in
resolve_delta(). Let's restore the call to get that progress back.
We'll also add a test that confirms we generate the expected progress.
This isn't perfect, as it wouldn't catch a bug where progress was
delayed to the end. That was probably possible to trigger when receiving
a thin pack, because we'd eventually call display_progress() from
fix_unresolved_deltas(), but only once after doing all the work.
However, since our test case generates a complete pack, it reliably
demonstrates this particular bug and its fix. And we can't do better
without making the test racy.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running `git checkout -p` with a merge-base rev results in an error:
$ git checkout -p HEAD...
usage: git diff-index [-m] [--cached] [<common-diff-options>] <tree-ish> [<path>...]
common diff options:
-z output diff-raw with lines terminated with NUL.
-p output patch format.
-u synonym for -p.
--patch-with-raw
output both a patch and the diff-raw format.
--stat show diffstat instead of patch.
--numstat show numeric diffstat instead of patch.
--patch-with-stat
output a patch and prepend its diffstat.
--name-only show only names of changed files.
--name-status show names and status of changed files.
--full-index show full object name on index lines.
--abbrev=<n> abbreviate object names in diff-tree header and diff-raw.
-R swap input file pairs.
-B detect complete rewrites.
-M detect renames.
-C detect copies.
--find-copies-harder
try unchanged files as candidate for copy detection.
-l<n> limit rename attempts up to <n> paths.
-O<file> reorder diffs according to the <file>.
-S<string> find filepair whose only one side contains the string.
--pickaxe-all
show all files diff when -S is used and hit is found.
-a --text treat all files as text.
Cannot close git diff-index --cached --numstat --summary HEAD... -- () at <redacted>/libexec/git-core/git-add--interactive line 183.
This happens because checkout passes the literal argument (in the
example, `HEAD...`) to diff-index which does not recognise merge-base
revs.
Fix this by using the hex of the found commit instead of the given name.
Note that "HEAD" is handled specially in run_add_interactive() so it's
explicitly not changed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learns to take "whenAble" as a possible value
for the format.useAutoBase configuration variable to become no-op
when the automatically computed base does not make sense.
* jk/format-auto-base-when-able:
format-patch: teach format.useAutoBase "whenAble" option
The lazy fetching done internally to make missing objects available
in a partial clone incorrectly made permanent damage to the partial
clone filter in the repository, which has been corrected.
* jt/keep-partial-clone-filter-upon-lazy-fetch:
fetch: do not override partial clone filter
promisor-remote: remove unused variable
Code cleanup.
* jk/unused:
dir.c: drop unused "untracked" from treat_path_fast()
sequencer: handle ignore_footer when parsing trailers
test-advise: check argument count with argc instead of argv
sparse-checkout: fill in some options boilerplate
sequencer: drop repository argument from run_git_commit()
push: drop unused repo argument to do_push()
assert PARSE_OPT_NONEG in parse-options callbacks
env--helper: write to opt->value in parseopt helper
drop unused argc parameters
convert: drop unused crlf_action from check_global_conv_flags_eol()
Update the tests to drop word 'master' from them.
* js/default-branch-name-part-2:
t9902: avoid using the branch name `master`
tests: avoid variations of the `master` branch name
t3200: avoid variations of the `master` branch name
fast-export: avoid using unnecessary language in a code comment
t/test-terminal: avoid non-inclusive language
"git shortlog" has been taught to group commits by the contents of
the trailer lines, like "Reviewed-by:", "Coauthored-by:", etc.
* jk/shortlog-group-by-trailer:
shortlog: allow multiple groups to be specified
shortlog: parse trailer idents
shortlog: rename parse_stdin_ident()
shortlog: de-duplicate trailer values
shortlog: match commit trailers with --group
trailer: add interface for iterating over commit trailers
shortlog: add grouping option
shortlog: change "author" variables to "ident"
Rewrite of the "git bisect" script in C continues.
* mr/bisect-in-c-2:
bisect--helper: reimplement `bisect_next` and `bisect_auto_next` shell functions in C
bisect: call 'clear_commit_marks_all()' in 'bisect_next_all()'
bisect--helper: reimplement `bisect_autostart` shell function in C
bisect--helper: introduce new `write_in_file()` function
bisect--helper: use '-res' in 'cmd_bisect__helper' return
bisect--helper: BUG() in cmd_*() on invalid subcommand
"git bisect start X Y", when X and Y are not valid committish
object names, should take X and Y as pathspec, but didn't.
* cc/bisect-start-fix:
bisect: don't use invalid oid as rev when starting
"git blame --ignore-rev/--ignore-revs-file" failed to validate
their input are valid revision, and failed to take into account
that the user may want to give an annotated tag instead of a
commit, which has been corrected.
* jc/blame-ignore-fix:
blame: validate and peel the object names on the ignore list
t8013: minimum preparatory clean-up
Compilation fix around type punning.
* jk/drop-unaligned-loads:
Revert "fast-export: use local array to store anonymized oid"
bswap.h: drop unaligned loads
The previous commit added the necessary machinery to implement the
"--force-if-includes" protection, when "--force-with-lease" is used
without giving exact object the remote still ought to have. Surface
the feature by adding a command line option and a configuration
variable to enable it.
- Add a flag: "TRANSPORT_PUSH_FORCE_IF_INCLUDES" to indicate that the
new option was passed from the command line of via configuration
settings; update command line and configuration parsers to set the
new flag accordingly.
- Introduce a new configuration option "push.useForceIfIncludes", which
is equivalent to setting "--force-if-includes" in the command line.
- Update "remote-curl" to recognize and pass this option to "send-pack"
when enabled.
- Update "advise" to catch the reject reason "REJECT_REF_NEEDS_UPDATE",
set when the ref status is "REF_STATUS_REJECT_REMOTE_UPDATED" and
(optionally) print a help message when the push fails.
- The new option is a "no-op" in the following scenarios:
* When used without "--force-with-lease".
* When used with "--force-with-lease", and if the expected commit
on the remote side is specified as an argument.
Signed-off-by: Srinidhi Kaushik <shrinidhi.kaushik@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a check to verify if the remote-tracking ref of the local branch
is reachable from one of its "reflog" entries.
The check iterates through the local ref's reflog to see if there
is an entry for the remote-tracking ref and collecting any commits
that are seen, into a list; the iteration stops if an entry in the
reflog matches the remote ref or if the entry timestamp is older
the latest entry of the remote ref's "reflog". If there wasn't an
entry found for the remote ref, "in_merge_bases_many()" is called
to check if it is reachable from the list of collected commits.
When a local branch that is based on a remote ref, has been rewound
and is to be force pushed on the remote, "--force-if-includes" runs
a check that ensures any updates to the remote-tracking ref that may
have happened (by push from another repository) in-between the time
of the last update to the local branch (via "git-pull", for instance)
and right before the time of push, have been integrated locally
before allowing a forced update.
If the new option is passed without specifying "--force-with-lease",
or specified along with "--force-with-lease=<refname>:<expect>" it
is a "no-op".
Signed-off-by: Srinidhi Kaushik <shrinidhi.kaushik@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The format.useAutoBase configuration option exists to allow users to
enable '--base=auto' for format-patch by default.
This can sometimes lead to poor workflow, due to unexpected failures
when attempting to format an ancient patch:
$ git format-patch -1 <an old commit>
fatal: base commit shouldn't be in revision list
This can be very confusing, as it is not necessarily immediately obvious
that the user requested a --base (since this was in the configuration,
not on the command line).
We do want --base=auto to fail when it cannot provide a suitable base,
as it would be equally confusing if a formatted patch did not include
the base information when it was requested.
Teach format.useAutoBase a new mode, "whenAble". This mode will cause
format-patch to attempt to include a base commit when it can. However,
if no valid base commit can be found, then format-patch will continue
formatting the patch without a base commit.
In order to avoid making yet another branch name unusable with --base,
do not teach --base=whenAble or --base=whenable.
Instead, refactor the base_commit option to use a callback, and rely on
the global configuration variable auto_base.
This does mean that a user cannot request this optional base commit
generation from the command line. However, this is likely not too
valuable. If the user requests base information manually, they will be
immediately informed of the failure to acquire a suitable base commit.
This allows the user to make an informed choice about whether to
continue the format.
Add tests to cover the new mode of operation for --base.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While the default remote name of "origin" can be changed at clone-time
with `git clone`'s `--origin` option, it was previously not possible
to specify a default value for the name of that remote. Add support for
a new `clone.defaultRemoteName` config, with the newly-created remote
name resolved in priority order:
1. (Highest priority) A remote name passed directly to `git clone -o`
2. A `clone.defaultRemoteName=new_name` in config `git clone -c`
3. A `clone.defaultRemoteName` value set in `/path/to/template/config`,
where `--template=/path/to/template` is provided
4. A `clone.defaultRemoteName` value set in a non-template config file
5. The default value of `origin`
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Derrick Stolee <stolee@gmail.com>
Helped-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Sean Barag <sean@barag.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a future patch, the name of the remote created by `git clone` may
come from multiple sources. To avoid confusion, convert most uses of
option_origin to remote_name, leaving option_origin to exclusively
represent the -o/--origin option.
Helped-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Sean Barag <sean@barag.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Providing a bad origin name to `git clone` currently reports an
'invalid refspec' error instead of a more explicit message explaining
that the `--origin` option was malformed. This behavior dates back to
since 8434c2f1 (Build in clone, 2008-04-27). Reintroduce
validation for the provided `--origin` option, but notably _don't_
include a multi-level check (e.g. "foo/bar") that was present in the
original `git-clone.sh`. `git remote` allows multi-level remote names
since at least 46220ca100 (remote.c: Fix overtight refspec validation,
2008-03-20), so that appears to be the desired behavior.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Derrick Stolee <stolee@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Sean Barag <sean@barag.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for a future patch, extract from remote.c a function that
validates possible remote names so that its rules can be used
consistently in other places.
Helped-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Sean Barag <sean@barag.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parsing command-line options before reading from config required careful
handling to ensure CLI options were treated with higher priority. Read
config first to let parsed CLI naively overwrite matching config values.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Sean Barag <sean@barag.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both fetch and push support pattern refspecs which allow fetching or
pushing references that match a specific pattern. Because these patterns
are globs, they have somewhat limited ability to express more complex
situations.
For example, suppose you wish to fetch all branches from a remote except
for a specific one. To allow this, you must setup a set of refspecs
which match only the branches you want. Because refspecs are either
explicit name matches, or simple globs, many patterns cannot be
expressed.
Add support for a new type of refspec, referred to as "negative"
refspecs. These are prefixed with a '^' and mean "exclude any ref
matching this refspec". They can only have one "side" which always
refers to the source. During a fetch, this refers to the name of the ref
on the remote. During a push, this refers to the name of the ref on the
local side.
With negative refspecs, users can express more complex patterns. For
example:
git fetch origin refs/heads/*:refs/remotes/origin/* ^refs/heads/dontwant
will fetch all branches on origin into remotes/origin, but will exclude
fetching the branch named dontwant.
Refspecs today are commutative, meaning that order doesn't expressly
matter. Rather than forcing an implied order, negative refspecs will
always be applied last. That is, in order to match, a ref must match at
least one positive refspec, and match none of the negative refspecs.
This is similar to how negative pathspecs work.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-checkout passes along argv and argc to its sub-command helper
functions. Many of these sub-commands do not yet take any command-line
options, and ignore those parameters.
Let's instead add empty option lists and make sure we call
parse_options(). That will give a useful error message for something
like:
git sparse-checkout list --nonsense
which currently just silently ignores the unknown option.
As a bonus, it also silences some -Wunused-parameter warnings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We stopped using the "repo" argument in 8e4c8af058 (push: disallow --all
and refspecs when remote.<name>.mirror is set, 2019-09-02), which moved
the pushremote handling to its caller.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the spirit of 517fe807d6 (assert NOARG/NONEG behavior of
parse-options callbacks, 2018-11-05), let's cover some parse-options
callbacks which expect to be used with PARSE_OPT_NONEG but don't
explicitly assert that this is the case. These callbacks are all used
correctly in the current code, but this will help document their
expectations and future-proof the code.
As a bonus, it also silences -Wunused-parameters (these were added since
the initial sweep of 517fe807d6, and we can't yet turn on
-Wunused-parameters to remind people because it has too many existing
false positives).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use OPT_CALLBACK_F() to call the option_parse_type() callback,
passing it the address of "cmdmode" as the value to write to. But the
callback doesn't look at opt->value at all, and instead writes to a
global variable.
This works out because that's the same global variable we happen to pass
in, but it's rather confusing. Let's use the passed-in value instead.
We'll also make "cmdmode" a local variable of the main function,
ensuring we can't make the same mistake again.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many functions take an argv/argc pair, but never actually look at argc.
This makes it useless at best (we use the NULL sentinel in argv to find
the end of the array), and misleading at worst (what happens if the argc
count does not match the argv NULL?).
In each of these instances, the argv NULL does match the argc count, so
there are no bugs here. But let's tighten the interfaces to make it
harder to get wrong (and to reduce some -Wunused-parameter complaints).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we taught "git pull" to warn when the user does not say the
histories need to be merged, rebased or accepts only fast-
forwarding, but the warning triggered for those who have set the
pull.ff configuration variable.
* ah/pull:
pull: don't warn if pull.ff has been set
"git clone" that clones from SHA-1 repository, while
GIT_DEFAULT_HASH set to use SHA-256 already, resulted in an
unusable repository that half-claims to be SHA-256 repository
with SHA-1 objects and refs. This has been corrected.
* bc/clone-with-git-default-hash-fix:
builtin/clone: avoid failure with GIT_DEFAULT_HASH
"git commit-graph write" learned to limit the number of bloom
filters that are computed from scratch with the --max-new-filters
option.
* tb/bloom-improvements:
commit-graph: introduce 'commitGraph.maxNewFilters'
builtin/commit-graph.c: introduce '--max-new-filters=<n>'
commit-graph: rename 'split_commit_graph_opts'
bloom: encode out-of-bounds filters as non-empty
bloom/diff: properly short-circuit on max_changes
bloom: use provided 'struct bloom_filter_settings'
bloom: split 'get_bloom_filter()' in two
commit-graph.c: store maximum changed paths
commit-graph: respect 'commitGraph.readChangedPaths'
t/helper/test-read-graph.c: prepare repo settings
commit-graph: pass a 'struct repository *' in more places
t4216: use an '&&'-chain
commit-graph: introduce 'get_bloom_filter_settings()'
Get rid of 'dense' argument that is redundant for every function that has
'struct rev_info *rev' argument as well, as the value of 'dense' passed is
always taken from 'rev->dense_combined_merges' field.
The only place where this was not the case is in 'submodule.c' where
'diff_tree_combined_merge()' was called with '1' for 'dense' argument. However,
at that call the 'revs' instance used is local to the function, and we now just
set 'revs->dense_combined_merges' to 1 in this local instance.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a fetch with the --filter argument is made, the configured default
filter is set even if one already exists. This change was made in
5e46139376 ("builtin/fetch: remove unique promisor remote limitation",
2019-06-25) - in particular, changing from:
* If this is the FIRST partial-fetch request, we enable partial
* on this repo and remember the given filter-spec as the default
* for subsequent fetches to this remote.
to:
* If this is a partial-fetch request, we enable partial on
* this repo if not already enabled and remember the given
* filter-spec as the default for subsequent fetches to this
* remote.
(The given filter-spec is "remembered" even if there is already an
existing one.)
This is problematic whenever a lazy fetch is made, because lazy fetches
are made using "git fetch --filter=blob:none", but this will also happen
if the user invokes "git fetch --filter=<filter>" manually. Therefore,
restore the behavior prior to 5e46139376, which writes a filter-spec
only if the current fetch request is the first partial-fetch one (for
that remote).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that shortlog supports reading from trailers, it can be useful to
combine counts from multiple trailers, or between trailers and authors.
This can be done manually by post-processing the output from multiple
runs, but it's non-trivial to make sure that each name/commit pair is
counted only once.
This patch teaches shortlog to accept multiple --group options on the
command line, and pull data from all of them. That makes it possible to
run:
git shortlog -ns --group=author --group=trailer:co-authored-by
to get a shortlog that counts authors and co-authors equally.
The implementation is mostly straightforward. The "group" enum becomes a
bitfield, and the trailer key becomes a list. I didn't bother
implementing the multi-group semantics for reading from stdin. It would
be possible to do, but the existing matching code makes it awkward, and
I doubt anybody cares.
The duplicate suppression we used for trailers now covers authors and
committers as well (though in non-trailer single-group mode we can skip
the hash insertion and lookup, since we only see one value per commit).
There is one subtlety: we now care about the case when no group bit is
set (in which case we default to showing the author). The caller in
builtin/log.c needs to be adapted to ask explicitly for authors, rather
than relying on shortlog_init(). It would be possible with some
gymnastics to make this keep working as-is, but it's not worth it for a
single caller.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Trailers don't necessarily contain name/email identity values, so
shortlog has so far treated them as opaque strings. However, since many
trailers do contain identities, it's useful to treat them as such when
they can be parsed. That lets "-e" work as usual, as well as mailmap.
When they can't be parsed, we'll continue with the old behavior of
treating them as a single string (there's no new test for that here,
since the existing tests cover a trailer like this).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is actually useful for parsing any identity, whether from
stdin or not. We'll need it for handling trailers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current documentation is vague about what happens with
--group=trailer:signed-off-by when we see a commit with:
Signed-off-by: One
Signed-off-by: Two
Signed-off-by: One
We clearly should credit both "One" and "Two", but should "One" get
credited twice? The current code does so, but mostly because that was
the easiest thing to do. It's probably more useful to count each commit
at most once. This will become especially important when we allow
values from multiple sources in a future patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a project uses commit trailers, this patch lets you use
shortlog to see who is performing each action. For example,
running:
git shortlog -ns --group=trailer:reviewed-by
in git.git shows who has reviewed. You can even use a custom
format to see things like who has helped whom:
git shortlog --format="...helped %an (%ad)" \
--group=trailer:helped-by
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for adding more grouping types, let's refactor the
committer/author grouping code and add a user-facing option that binds
them together. In particular:
- the main option is now "--group", to make it clear
that the various group types are mutually exclusive. The
"--committer" option is an alias for "--group=committer".
- we keep an enum rather than a binary flag, to prepare
for more values
- we prefer switch statements to ternary assignment, since
other group types will need more custom code
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git receive-pack" that accepts requests by "git push" learned to
outsource most of the ref updates to the new "proc-receive" hook.
* jx/proc-receive-hook:
doc: add documentation for the proc-receive hook
transport: parse report options for tracking refs
t5411: test updates of remote-tracking branches
receive-pack: new config receive.procReceiveRefs
doc: add document for capability report-status-v2
New capability "report-status-v2" for git-push
receive-pack: feed report options to post-receive
receive-pack: add new proc-receive hook
t5411: add basic test cases for proc-receive hook
transport: not report a non-head push as a branch
A "git gc"'s big brother has been introduced to take care of more
repository maintenance tasks, not limited to the object database
cleaning.
* ds/maintenance-part-1:
maintenance: add trace2 regions for task execution
maintenance: add auto condition for commit-graph task
maintenance: use pointers to check --auto
maintenance: create maintenance.<task>.enabled config
maintenance: take a lock on the objects directory
maintenance: add --task option
maintenance: add commit-graph task
maintenance: initialize task array
maintenance: replace run_auto_gc()
maintenance: add --quiet option
maintenance: create basic maintenance runner
Add new subcommands to 'git maintenance' that start or stop background
maintenance using 'cron', when available. This integration is as simple
as I could make it, barring some implementation complications.
The schedule is laid out as follows:
0 1-23 * * * $cmd maintenance run --schedule=hourly
0 0 * * 1-6 $cmd maintenance run --schedule=daily
0 0 * * 0 $cmd maintenance run --schedule=weekly
where $cmd is a properly-qualified 'git for-each-repo' execution:
$cmd=$path/git --exec-path=$path for-each-repo --config=maintenance.repo
where $path points to the location of the Git executable running 'git
maintenance start'. This is critical for systems with multiple versions
of Git. Specifically, macOS has a system version at '/usr/bin/git' while
the version that users can install resides at '/usr/local/bin/git'
(symlinked to '/usr/local/libexec/git-core/git'). This will also use
your locally-built version if you build and run this in your development
environment without installing first.
This conditional schedule avoids having cron launch multiple 'git
for-each-repo' commands in parallel. Such parallel commands would likely
lead to the 'hourly' and 'daily' tasks competing over the object
database lock. This could lead to to some tasks never being run! Since
the --schedule=<frequency> argument will run all tasks with _at least_
the given frequency, the daily runs will also run the hourly tasks.
Similarly, the weekly runs will also run the daily and hourly tasks.
The GIT_TEST_CRONTAB environment variable is not intended for users to
edit, but instead as a way to mock the 'crontab [-l]' command. This
variable is set in test-lib.sh to avoid a future test from accidentally
running anything with the cron integration from modifying the user's
schedule. We use GIT_TEST_CRONTAB='test-tool crontab <file>' in our
tests to check how the schedule is modified in 'git maintenance
(start|stop)' commands.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for launching background maintenance from the 'git
maintenance' builtin, create register/unregister subcommands. These
commands update the new 'maintenance.repos' config option in the global
config so the background maintenance job knows which repositories to
maintain.
These commands allow users to add a repository to the background
maintenance list without disrupting the actual maintenance mechanism.
For example, a user can run 'git maintenance register' when no
background maintenance is running and it will not start the background
maintenance. A later update to start running background maintenance will
then pick up this repository automatically.
The opposite example is that a user can run 'git maintenance unregister'
to remove the current repository from background maintenance without
halting maintenance for other repositories.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be helpful to store a list of repositories in global or system
config and then iterate Git commands on that list. Create a new builtin
that makes this process simple for experts. We will use this builtin to
run scheduled maintenance on all configured repositories in a future
change.
The test is very simple, but does highlight that the "--" argument is
optional.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
