"git cmd --help" when "cmd" is aliased used to only say "cmd is
aliased to ...". Now it shows that to the standard error stream
and runs "git $cmd --help" where $cmd is the first word of the
alias expansion.
This could be misleading for those who alias a command with options
(e.g. with "[alias] cpn = cherry-pick -n", "git cpn --help" would
show the manual of "cherry-pick", and the reader would not be told
to pay close attention to the part that describes the "--no-commit"
option until closing the pager that showed the contents of the
manual, if the pager is configured to restore the original screen,
or would not be told at all, if the pager simply makes the message
on the standard error scroll away.
* rv/alias-help:
git-help.txt: document "git help cmd" vs "git cmd --help" for aliases
git.c: handle_alias: prepend alias info when first argument is -h
help: redirect to aliased commands for "git cmd --help"
When called with --show-current, git branch will print the current
branch name and terminate. Only the actual name gets printed,
without refs/heads. In detached HEAD state, nothing is output.
Intended both for scripting and interactive/informative use.
Unlike git branch --list, no filtering is needed to just get the
branch name.
Signed-off-by: Daniels Umanovskis <daniels@umanovskis.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Initialize archivers as soon as possible when running git-archive.
Various non-obvious behavior depends on having the archivers
initialized, such as determining the desired archival format from the
provided filename.
Since 08716b3c11 ("archive: refactor file extension format-guessing",
2011-06-21), archive_format_from_filename() has used the registered
archivers to match filenames (provided via --output) to archival
formats. However, when git-archive is executed with --remote, format
detection happens before the archivers have been registered. This causes
archives from remotes to always be generated as TAR files, regardless of
the actual filename (unless an explicit --format is provided).
This patch fixes that behavior; archival format is determined properly
from the output filename, even when --remote is used.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git repack` can drop unreachable commits without further warning,
making the corresponding entries in `.git/shallow` invalid, which causes
serious problems when deepening the branches.
One scenario where unreachable commits are dropped by `git repack` is
when a `git fetch --prune` (or even a `git fetch` when a ref was
force-pushed in the meantime) can make a commit unreachable that was
reachable before.
Therefore it is not safe to assume that a `git repack -adlf` will keep
unreachable commits alone (under the assumption that they had not been
packed in the first place, which is an assumption at least some of Git's
code seems to make).
This is particularly important to keep in mind when looking at the
`.git/shallow` file: if any commits listed in that file become
unreachable, it is not a problem, but if they go missing, it *is* a
problem. One symptom of this problem is that a deepening fetch may now
fail with
fatal: error in object: unshallow <commit-hash>
To avoid this problem, let's prune the shallow list in `git repack` when
the `-d` option is passed, unless `-A` is passed, too (which would force
the now-unreachable objects to be turned into loose objects instead of
being deleted). Additionally, we also need to take `--keep-reachable`
and `--unpack-unreachable=<date>` into account.
Note: an alternative solution discussed during the review of this patch
was to teach `git fetch` to simply ignore entries in .git/shallow if the
corresponding commits do not exist locally. A quick test, however,
revealed that the .git/shallow file is written during a shallow *clone*,
in which case the commits do not exist, either, but the "shallow" line
*does* need to be sent. Therefore, this approach would be a lot more
finicky than the approach presented by the this patch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `prune_shallow()` function wants a full reachability check to be
completed before it goes to work, to ensure that all unreachable entries
are removed from the shallow file.
However, in the upcoming patch we do not even want to go that far. We
really only need to remove entries corresponding to pruned commits, i.e.
to commits that no longer exist.
Let's support that use case.
Rather than extending the signature of `prune_shallow()` to accept
another Boolean, let's turn it into a bit field and declare constants,
for readability.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we cannot stash dirty submodules, there is no use in requiring
them to be clean (or stash them when they are not).
This brings the built-in rebase in line with the previous, scripted
version, which also did not care about dirty submodules (but it was
admittedly not very easy to figure that out).
This fixes https://github.com/git-for-windows/git/issues/1820
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
refresh_index() is done after a reset command as an optimization. Because
it can be an expensive call, warn the user if it takes more than 2 seconds
and tell them how to avoid it using the --quiet command line option or
reset.quiet config setting.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a reset.quiet config setting that sets the default value of the --quiet
flag when running the reset command. This enables users to change the
default behavior to take advantage of the performance advantages of
avoiding the scan for unstaged changes after reset. Defaults to false.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git reset is run with the --quiet flag, don't bother finding any
additional unstaged changes as they won't be output anyway. This speeds up
the git reset command by avoiding having to lstat() every file looking for
changes that aren't going to be reported anyway.
The savings can be significant. In a repo on Windows with 200K files
"git reset" drops from 7.16 seconds to 0.32 seconds for a savings of 96%.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --exclude-promisor-objects option causes some funny behavior in at
least two commands: log and blame. It causes a BUG crash:
$ git log --exclude-promisor-objects
BUG: revision.c:2143: exclude_promisor_objects can only be used
when fetch_if_missing is 0
Aborted
[134]
Fix this such that the option is treated like any other unknown option.
The commands that must support it are limited, so declare in those
commands that the flag is supported. In particular:
pack-objects
prune
rev-list
The commands were found by searching for logic which parses
--exclude-promisor-objects outside of revision.c. Extra logic outside of
revision.c is needed because fetch_if_missing must be turned on before
revision.c sees the option or it will BUG-crash. The above list is
supported by the fact that no other command is introspectively invoked
by another command passing --exclude-promisor-object.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git stash apply <argument>` sees an argument that consists only of
digits, it tries to be smart and interpret it as `stash@{<number>}`.
Unfortunately, an all-digit hash (which is unlikely but still possible)
is therefore misinterpreted as `stash@{<n>}` reflog.
To prevent that from happening, let's append `^0` after the stash hash,
to make sure that it is interpreted as an OID rather than as a number.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was reported by Gábor Szeder and analyzed by Alban Gruin that the
built-in rebase stores only abbreviated stash hashes in the `autostash`
file.
This is problematic e.g. in t5520-pull.sh, where the abbreviated hash is
so short that it sometimes consists only of digits, which are
subsequently mistaken ("DWIMmed") for numbers by `git stash apply`.
Let's align the behavior of the built-in rebase with the scripted rebase
and store the full stash hash instead. That makes it a lot less likely
that it consists only of digits.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already called that function at this point, and stored the result in
the `path` variable. We might just as well use it ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fsck is a repo-wide operation and should check all references no
matter which worktree they are associated to.
Reported-by: Jeff King <peff@peff.net>
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will make it easier to check the HEAD of other worktrees from fsck.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new repo extension is added, worktreeConfig. When it is present:
- Repository config reading by default includes $GIT_DIR/config _and_
$GIT_DIR/config.worktree. "config" file remains shared in multiple
worktree setup.
- The special treatment for core.bare and core.worktree, to stay
effective only in main worktree, is gone. These config settings are
supposed to be in config.worktree.
This extension is most useful in multiple worktree setup because you
now have an option to store per-worktree config (which is either
.git/config.worktree for main worktree, or
.git/worktrees/xx/config.worktree for linked ones).
This extension can be used in single worktree mode, even though it's
pretty much useless (but this can happen after you remove all linked
worktrees and move back to single worktree).
"git config" reads from both "config" and "config.worktree" by default
(i.e. without either --user, --file...) when this extension is
present. Default writes still go to "config", not "config.worktree". A
new option --worktree is added for that (*).
Since a new repo extension is introduced, existing git binaries should
refuse to access to the repo (both from main and linked worktrees). So
they will not misread the config file (i.e. skip the config.worktree
part). They may still accidentally write to the config file anyway if
they use with "git config --file <path>".
This design places a bet on the assumption that the majority of config
variables are shared so it is the default mode. A safer move would be
default writes go to per-worktree file, so that accidental changes are
isolated.
(*) "git config --worktree" points back to "config" file when this
extension is not present and there is only one worktree so that it
works in any both single and multiple worktree setups.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 174d131fc9 (submodule.c: remove implicit dependency on
the_index - 2018-09-21) makes collect_changed_submodules() take a
"struct index_state *" as argument even if it's not really used. My
bad.
Instead of deleting this argument and fixing up all call sites. Let's
take this opportunity to remove some the_repository instead because
there's one or two in this function (and two more in its callback).
The callers can also get rid of some the_repository.
Noticed-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The multi-pack-index feature is tested in isolation by
t5319-multi-pack-index.sh, but there are many more interesting
scenarios in the test suite surrounding pack-file data shapes
and interactions. Since the multi-pack-index is an optional
data structure, it does not make sense to include it by default
in those tests.
Instead, add a new GIT_TEST_MULTI_PACK_INDEX environment variable
that enables core.multiPackIndex and writes a multi-pack-index
after each 'git repack' command. This adds extra test coverage
when needed.
There are a few spots in the test suite that need to react to this
change:
* t5319-multi-pack-index.sh: there is a test that checks that
'git repack' deletes the multi-pack-index. Disable the environment
variable to ensure this still happens.
* t5310-pack-bitmaps.sh: One test moves a pack-file from the object
directory to an alternate. This breaks the multi-pack-index, so
delete the multi-pack-index at this point, if it exists.
* t9300-fast-import.sh: One test verifies the number of files in
the .git/objects/pack directory is exactly 8. Exclude the
multi-pack-index from this count so it is still 8 in all cases.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When repacking, we may remove pack-files. This invalidates the
multi-pack-index (if it exists). Previously, we removed the
multi-pack-index file before removing any pack-file. In some cases,
the repack command may load the multi-pack-index into memory. This
may lead to later in-memory references to the non-existent pack-
files.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The handling of receive.denyCurrentBranch=updateInstead was added to
a switch statement that handles other values of the variable, but
all the other case arms only checked a condition to reject the
attempted push, or let later logic in the same function to still
intervene, so that a push that does not fast-forward (which is
checked after the switch statement in question) is still rejected.
But the handling of updateInstead incorrectly took immediate effect,
without giving other checks a chance to intervene.
Instead of calling update_worktree() that causes the side effect
immediately, just note the fact that we will need to call the
function later, and first give other checks a chance to reject the
request. After the update-hook gets a chance to reject the push
(which happens as the last step in a series of checks), call
update_worktree() when we earlier detected the need to.
Reported-by: Rajesh Madamanchi
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 9ac3f0e5b3 (pack-objects: fix performance issues on packing large
deltas, 2018-07-22), a mutex was introduced that is used to guard the
call to set the delta size. This commit even added code to initialize
it, but at an incorrect spot: in `init_threaded_search()`, while the
call to `oe_set_delta_size()` (and hence to `packing_data_lock()`) can
happen in the call chain `check_object()` <- `get_object_details()` <-
`prepare_pack()` <- `cmd_pack_objects()`, which is long before the
`prepare_pack()` function calls `ll_find_deltas()` (which initializes
the threaded search).
Another tell-tale that the mutex was initialized in an incorrect spot is
that the function to initialize it lives in builtin/, while the code
that uses the mutex is defined in a libgit.a header file.
Let's use a more appropriate function: `prepare_packing_data()`, which
not only lives in libgit.a, but *has* to be called before the
`packing_data` struct is used that contains that mutex.
This fixes https://github.com/git-for-windows/git/issues/1839.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing into a repository that borrows its objects from an
alternate object store, "git receive-pack" that responds to the
push request on the other side lists the tips of refs in the
alternate to reduce the amount of objects transferred. This
sometimes is detrimental when the number of refs in the alternate
is absurdly large, in which case the bandwidth saved in potentially
fewer objects transferred is wasted in excessively large ref
advertisement. The alternate refs that are advertised are now
configurable with a pair of configuration variables.
* tb/filter-alternate-refs:
transport.c: introduce core.alternateRefsPrefixes
transport.c: introduce core.alternateRefsCommand
transport.c: extract 'fill_alternate_refs_command'
transport: drop refnames from for_each_alternate_ref
Over some transports, fetching objects with an exact commit object
name can be done without first seeing the ref advertisements. The
code has been optimized to exploit this.
* jt/avoid-ls-refs:
fetch: do not list refs if fetching only hashes
transport: list refs before fetch if necessary
transport: do not list refs if possible
transport: allow skipping of ref listing
Unlike "grep", "git grep" by default recurses to the whole tree.
The command learned "git grep --recursive" option, so that "git
grep --no-recursive" can serve as a synonym to setting the
max-depth to 0.
* rs/grep-no-recursive:
grep: add -r/--[no-]recursive
"git help -a" and "git help -av" give different pieces of
information, and generally the "verbose" version is more friendly
to the new users. "git help -a" by default now uses the more
verbose output (with "--no-verbose", you can go back to the
original). Also "git help -av" now lists aliases and external
commands, which it did not used to.
* nd/help-commands-verbose-by-default:
help -a: improve and make --verbose default
"git fetch $repo $object" in a partial clone did not correctly
fetch the asked-for object that is referenced by an object in
promisor packfile, which has been fixed.
* jt/fetch-tips-in-partial-clone:
fetch: in partial clone, check presence of targets
connected: document connectivity in partial clones
"git status" learns to show progress bar when refreshing the index
takes a long time.
* nd/status-refresh-progress:
status: show progress bar if refreshing the index takes too long
Code clean-up in the internal machinery used by "git status" and
"git commit --dry-run".
* ss/wt-status-committable:
roll wt_status_state into wt_status and populate in the collect phase
wt-status.c: set the committable flag in the collect phase
t7501: add test of "commit --dry-run --short"
wt-status: rename commitable to committable
wt-status.c: move has_unmerged earlier in the file
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
Use ref_array_clear() to release memory instead of UNLEAK macros.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The submodule helper update_clone called by "git submodule update",
clones submodules if needed. As submodules used to have the URL indicating
if they were active, the step to resolve relative URLs was done in the
"submodule init" step. Nowadays submodules can be configured active without
calling an explicit init, e.g. via configuring submodule.active.
When trying to obtain submodules that are set active this way, we'll
fallback to the URL found in the .gitmodules, which may be relative to the
superproject, but we do not resolve it, yet:
git clone https://gerrit.googlesource.com/gerrit
cd gerrit && grep url .gitmodules
url = ../plugins/codemirror-editor
...
git config submodule.active .
git submodule update
fatal: repository '../plugins/codemirror-editor' does not exist
fatal: clone of '../plugins/codemirror-editor' into submodule path '/tmp/gerrit/plugins/codemirror-editor' failed
Failed to clone 'plugins/codemirror-editor'. Retry scheduled
[...]
fatal: clone of '../plugins/codemirror-editor' into submodule path '/tmp/gerrit/plugins/codemirror-editor' failed
Failed to clone 'plugins/codemirror-editor' a second time, aborting
[...]
To resolve the issue, factor out the function that resolves the relative
URLs in "git submodule init" (in the submodule helper in the init_submodule
function) and call it at the appropriate place in the update_clone helper.
Reported-by: Jaewoong Jung <jungjw@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
branch_get sometimes returns current_branch, which can be NULL (e.g., if
you're on a detached HEAD). Try:
$ git branch HEAD
fatal: no such branch 'HEAD'
$ git branch ''
fatal: no such branch ''
However, it seems weird that we'd check those cases here (and provide
such lousy messages). And indeed, dropping that and letting us
eventually hit create_branch() gives a much better message:
$ git branch HEAD
fatal: 'HEAD' is not a valid branch name.
$ git branch ''
fatal: '' is not a valid branch name.
Signed-off-by: Tao Qingyun <taoqy@ls-a.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code in "git status" sometimes hit an assertion failure. This
was caused by a structure that was reused without cleaning the data
used for the first run, which has been corrected.
* en/status-multiple-renames-to-the-same-target-fix:
commit: fix erroneous BUG, 'multiple renames on the same target? how?'
"gc --auto" ended up calling exit(-1) upon error, which has been
corrected to use exit(1). Also the error reporting behaviour when
daemonized has been updated to exit with zero status when stopping
due to a previously discovered error (which implies there is no
point running gc to improve the situation); we used to exit with
failure in such a case.
* jn/gc-auto:
gc: do not return error for prior errors in daemonized mode
Fix interactions between two recent topics.
* jk/delta-islands-with-bitmap-reuse-delta-fix:
pack-objects: handle island check for "external" delta base
The recently introduced commit-graph auxiliary data is incompatible
with mechanisms such as replace & grafts that "breaks" immutable
nature of the object reference relationship. Disable optimizations
based on its use (and updating existing commit-graph) when these
incompatible features are in use in the repository.
* ds/commit-graph-with-grafts:
commit-graph: close_commit_graph before shallow walk
commit-graph: not compatible with uninitialized repo
commit-graph: not compatible with grafts
commit-graph: not compatible with replace objects
test-repository: properly init repo
commit-graph: update design document
refs.c: upgrade for_each_replace_ref to be a each_repo_ref_fn callback
refs.c: migrate internal ref iteration to pass thru repository argument
Generation of (experimental) commit-graph files have so far been
fairly silent, even though it takes noticeable amount of time in a
meaningfully large repository. The users will now see progress
output.
* ab/commit-graph-progress:
gc: fix regression in 7b0f229222 impacting --quiet
commit-graph verify: add progress output
commit-graph write: add progress output
Instead of using GIT_SHA1_HEXSZ, use parse_oid_hex to compute a pointer
and use that in comparisons. This is both simpler to read and works
independent of the hash length. Update references to SHA-1 in the same
function to refer to object IDs instead.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using a hard-coded constant for the size of a hex object ID,
switch to use the computed pointer from parse_oid_hex that points after
the parsed object ID.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note that while the error messages here are not translated, the end user
should never see them. We invoke git pack-objects shortly before both
invocations, so we can be fairly certain that the data we're receiving
is in fact valid.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The separator between words in a multi-word option name is a dash,
not an underscore.
Inspired by a matching change by Ralf Thielow for the scripted
version of "git rebase".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the builtin rebase is feature-complete, we should use it by
default. Let's keep the legacy scripted version around for the time
being; Once the builtin rebase is well-tested enough, we can remove
`git-legacy-rebase.sh`.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The builtin rebase and the builtin interactive rebase have been
developed independently, on purpose: Google Summer of Code rules
specifically state that students have to work on independent projects,
they cannot collaborate on the same project.
One fallout is that the rebase-in-c and rebase-i-in-c patches cause no
merge conflicts but a royal number of tests in the test suite to fail.
It is easy to explain why: rebase-in-c was developed under the
assumption that all rebase backends are implemented in Unix shell script
and can be sourced via `. git-rebase--<backend>`, which is no longer
true with rebase-i-in-c, where git-rebase--interactive is a hard-linked
builtin.
This patch fixes that.
Please note that we also skip the finish_rebase() call for interactive
rebases because the built-in interactive rebase already takes care of
that. This is needed to support the upcoming `break` command that wants
to interrupt the rebase with exit code 0 (and naturally wants to keep
the state directory intact when doing so).
While at it, remove the `case` arm for the interactive rebase that is
now skipped in favor of the short-cut to the built-in rebase.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
