Fix a memory leak in code added in 41abfe15d9 (maintenance: add
pack-refs task, 2021-02-09), we need to call strvec_clear() on the
"struct strvec" that we initialized.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 1c41d2805e (unpack_trees_options: free messages when done,
2018-05-21) we started calling clear_unpack_trees_porcelain() on this
codepath, but missed this error path.
We could call clear_unpack_trees_porcelain() just before we error()
and return when unmerged_cache() fails, but the more correct fix is to
not have the unmerged_cache() check happen in the middle of our
"topts" setup.
Before 23cbf11b5c (merge-recursive: porcelain messages for checkout,
2010-08-11) we would not malloc() to setup our "topts", which is when
this started to leak on the error path.
Before that this code wasn't conflating the setup of "topts" and the
unmerged_cache() call in any meaningful way. The initial version in
782c2d65c2 (Build in checkout, 2008-02-07) just does a "memset" of
it, and initializes a single struct member.
Then in 8ccba008ee (unpack-trees: allow Porcelain to give different
error messages, 2008-05-17) we added the initialization of the error
message, which as noted above finally started leaking in 23cbf11b5c.
Let's fix the memory leak, and avoid future issues by initializing the
"topts" with a helper function. There are no functional changes here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in "merge-file", we need to loop over the "mmfs"
array and free() what we've got so far when we error out. As a result
we can mark a test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the code in builtin/merge-file.c to:
* Use the initializer to zero out "mmfs", and use modern C syntax for
the rest.
* Refactor the the inner loop to use a variable and "if/else if"
pattern followed by "return". This will make a change to change it to
a "goto cleanup" pattern smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak introduced in 440c705ea6 (cat-file: add
--batch-command mode, 2022-02-18). The free_cmds() function was only
called on "queued_nr" if we had a "flush" command. As the "without
flush for blob info" test added in the same commit shows we can't rely
on that, so let's call free_cmds() again at the end.
Since "nr" follows the usual pattern of being set to 0 if we've
free()'d the memory already it's OK to call it twice, even in cases
where we are doing a "flush".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call the release_revisions() function added in
1878b5edc0 (revision.[ch]: provide and start using a
release_revisions(), 2022-04-13) in cmd_revert(), as well as freeing
the xmalloc()'d "revs" member itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak added in 0ec4b1650c (clone: fix ref selection in
--single-branch --branch=xxx, 2012-06-22).
Whether we get our "remote_head" from copy_ref() directly, or with a
call to guess_remote_head() it'll be the result of a copy_ref() in
either case, as guess_remote_head() is a wrapper for copy_ref() (or it
returns NULL).
We can't mark any tests passing passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true" as a result of this change, but
e.g. "t/t1500-rev-parse.sh" now gets closer to passing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in "git check-ref-format" that's been present in the
code in one form or another since 38eedc634b (git check-ref-format
--print, 2009-10-12), the code got substantially refactored in
cfbe22f03f (check-ref-format: handle subcommands in separate
functions, 2010-08-05).
As a result we can mark a test as passing with SANITIZE=leak using
"TEST_PASSES_SANITIZE_LEAK=true".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All invocations of do_get_submodule_displaypath() pass
get_super_prefix() as the super_prefix arg, which is exactly the same
as get_submodule_displaypath().
Replace all calls to do_get_submodule_displaypath() with
get_submodule_displaypath(), and since it has no more callers, remove
it.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike the other subcommands, "git submodule--helper update" uses the
"--recursive-prefix" flag instead of "--super-prefix". The two flags are
otherwise identical (they only serve to compute the 'display path' of a
submodule), except that there is a dedicated helper function to get the
value of "--super-prefix".
This inconsistency exists because "git submodule update" used to pass
"--recursive-prefix" between shell and C (introduced in [1]) before
"--super-prefix" was introduced (in [2]), and for simplicity, we kept
this name when "git submodule--helper update" was created.
Remove "--recursive-prefix" and its associated code from "git
submodule--helper update", replacing it with "--super-prefix".
To use "--super-prefix", module_update is marked with
SUPPORT_SUPER_PREFIX. Note that module_clone must also be marked with
SUPPORT_SUPER_PREFIX, otherwise the "git submodule--helper clone"
subprocess will fail check because "--super-prefix" is propagated via
the environment.
[1] 48308681b0 (git submodule update: have a dedicated helper for
cloning, 2016-02-29)
[2] 74866d7579 (git: make super-prefix option, 2016-10-07)
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the SUPPORT_SUPER_PREFIX flag from "add", "init" and
"summary". For the "add" command it hasn't been used since [1],
likewise for "init" and "summary" since [2] and [3], respectively.
As implemented in 74866d7579 (git: make super-prefix option,
2016-10-07) the SUPPORT_SUPER_PREFIX flag in git.c applies for the
entire command, but as implemented in 89c8626557 (submodule helper:
support super prefix, 2016-12-08) we assert here in
cmd_submodule__helper() that we're not getting the flag unexpectedly.
1. 8c8195e9c3 (submodule--helper: introduce add-clone subcommand,
2021-07-10)
2. 6e7c14e65c (submodule update --init: display correct path from
submodule, 2017-01-06)
3. 1cf823d8f0 (submodule: remove unnecessary `prefix` based option
logic, 2021-06-22)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace a chunk of code in update_submodule() with an equivalent
do_get_submodule_displaypath() invocation. This is already tested by
t/t7406-submodule-update.sh:'submodule update --init --recursive from
subdirectory', so no tests are added.
The two are equivalent because:
- Exactly one of recursive_prefix|prefix is non-NULL at a time; prefix
is set at the superproject level, and recursive_prefix is set when
recursing into submodules. There is also a BUG() statement in
get_submodule_displaypath() that asserts that both cannot be non-NULL.
- In get_submodule_displaypath(), get_super_prefix() always returns NULL
because "--super-prefix" is never passed. Thus calling it is
equivalent to calling do_get_submodule_displaypath() with super_prefix
= NULL.
Therefore:
- When recursive_prefix is non-NULL, prefix is NULL, and thus
get_submodule_displaypath() just returns prefixed_path. This is
identical to calling do_get_submodule_displaypath() with super_prefix
= recursive_prefix because the return value is still the concatenation
of recursive_prefix + update_data->sm_path.
- When prefix is non-NULL, prefixed_path = update_data->sm_path. Thus
calling get_submodule_displaypath() with prefixed_path is equivalent
to calling do_get_submodule_displaypath() with update_data->sm_path
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
update_submodule() uses duplicated code to compute
update_data->displaypath and next.recursive_prefix. The latter is just
the former with "/" appended to it, and since update_data->displaypath
not changed outside of this statement, we can just reuse the already
computed result.
We can go one step further and remove the reference to
next.recursive_prefix altogether. Since it is only used in
update_data_to_args() (to compute the "--recursive-prefix" flag for the
recursive update child process) we can just use the already computed
.displaypath value of there.
Delete the duplicated code, and remove the unnecessary reference to
next.recursive_prefix. As a bonus, this fixes a memory leak where
prefixed_path was never freed (this leak was first reported in [1]).
[1] https://lore.kernel.org/git/877a45867ae368bf9e053caedcb6cf421e02344d.1655336146.git.gitgitgadget@gmail.com
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two locations in prepare_to_clone_next_submodule() that
manually calculate the submodule display path, but should just use
do_get_submodule_displaypath() for consistency.
Do this replacement and reorder the code slightly to avoid computing
the display path twice.
Until the preceding commit this code had never been tested, with our
newly added tests we can see that both these sites have been computing
the display path incorrectly ever since they were introduced in
48308681b0 (git submodule update: have a dedicated helper for cloning,
2016-02-29) [1]:
- The first hunk puts a "/" between recursive_prefix and ce->name, but
recursive_prefix already ends with "/".
- The second hunk calls relative_path() on recursive_prefix and
ce->name, but relative_path() only makes sense when both paths share
the same base directory. This is never the case here:
- recursive_prefix is the path from the topmost superproject to the
current submodule
- ce->name is the path from the root of the current submodule to its
submodule.
so, e.g. recursive_prefix="super" and ce->name="submodule" produces
displayname="../super" instead of "super/submodule".
[1] I verified this by applying the tests to 48308681b0.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow-up on the preceding commit which taught "git submodule--helper
update" to understand "--merge", "--checkout" and "--rebase" and use
those options instead of "--update=(rebase|merge|checkout|none)" when
the command invokes itself.
Unlike the preceding change this isn't strictly necessary to
eventually change "git-submodule.sh" so that it invokes "git
submodule--helper update" directly, but let's remove this
inconsistency in the command-line interface. We shouldn't need to
carry special synonyms for existing options in "git submodule--helper"
when that command can use the primary documented names instead.
But, as seen in the post-image this makes the control flow within
"builtin/submodule--helper.c" simpler, we can now write directly to
the "update_default" member of "struct update_data" when parsing the
options in "module_update()".
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Understand --checkout, --merge and --rebase synonyms for
--update={checkout,merge,rebase}, as well as the short options that
'git submodule' itself understands.
This removes a difference between the CLI API of "git submodule" and
"git submodule--helper", making it easier to make the latter an alias
for the former. See 48308681b0 (git submodule update: have a
dedicated helper for cloning, 2016-02-29) for the initial addition of
--update.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the user-facing "git submodule--helper" commands so that
they'll report their name as being "git submodule". To a user these
commands are internal implementation details, and it doesn't make
sense to emit usage about an internal helper when "git submodule" is
invoked with invalid options.
Before this we'd emit e.g.:
$ git submodule absorbgitdirs --blah
error: unknown option `blah'
usage: git submodule--helper absorbgitdirs [<options>] [<path>...]
[...]
And:
$ git submodule set-url -- --
usage: git submodule--helper set-url [--quiet] <path> <newurl>
[...]
Now we'll start with "usage: git submodule [...]" in both of those
cases. This change does not alter the "list", "name", "clone",
"config" and "create-branch" commands, those are internal-only (as an
aside; their usage info should probably invoke BUG(...)). This only
changes the user-facing commands.
The "status", "deinit" and "update" commands are not included in this
change, because their usage information already used "submodule"
rather than "submodule--helper".
I don't think it's currently possible to emit some of this usage
information in practice, as git-submodule.sh will catch unknown
options, and e.g. it doesn't seem to be possible to get "add" to emit
its usage information from "submodule--helper".
Though that change may be superfluous now, it's also harmless, and
will allow us to eventually dispatch further into "git
submodule--helper" from git-submodule.sh, while emitting the correct
usage output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the "absorb-git-dirs" subcommand to "absorbgitdirs", which is
what the "git submodule" command itself has called it since the
subcommand was implemented in f6f8586140 (submodule: add
absorb-git-dir function, 2016-12-12).
Having these two be different will make it more tedious to dispatch to
eventually dispatch "git submodule--helper" directly, as we'd need to
retain this name mapping. So let's get rid of this needless
inconsistency.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust code added in 0060fd1511 (clone --recurse-submodules: prevent
name squatting on Windows, 2019-09-12) to have the internal
--require-init option imply --init, rather than having
"git-submodule.sh" add it implicitly.
This change doesn't make any difference now, but eliminates another
special-case where "git submodule--helper update"'s behavior was
different from "git submodule update". This will make it easier to
eventually replace the cmd_update() function in git-submodule.sh.
We'll still need to keep the distinction between "--init" and
"--require-init" in git-submodule.sh. Once cmd_update() gets
re-implemented in C we'll be able to change variables and other code
related to that, but not yet.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Folks may want to merge histories that have no common ancestry; provide
a flag with the same name as used by `git merge` to allow this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much as `git ls-files` has a -z option, let's add one to merge-tree so
that the conflict-info section can be NUL terminated (and avoid quoting
of unusual filenames).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the new `detailed` parameter, a new mode can be triggered when
displaying the merge messages: The `detailed` mode prints NUL-delimited
fields of the following form:
<path-count> NUL <path>... NUL <conflict-type> NUL <message>
The `<path-count>` field determines how many `<path>` fields there are.
The intention of this mode is to support server-side operations, where
worktree-less merges can lead to conflicts and depending on the type
and/or path count, the caller might know how to handle said conflict.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Much like `git merge` updates the index with information of the form
(mode, oid, stage, name)
provide this output for conflicted files for merge-tree as well.
Provide a --name-only option for users to exclude the mode, oid, and
stage and only get the list of conflicted filenames.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers of `git merge-tree --write-tree` will often want to know which
files had conflicts. While they could potentially attempt to parse the
CONFLICT notices printed, those messages are not meant to be machine
readable. Provide a simpler mechanism of just printing the files (in
the same format as `git ls-files` with quoting, but restricted to
unmerged files) in the output before the free-form messages.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running `git merge-tree --write-tree`, we previously would only
return an exit status reflecting the cleanness of a merge, and print out
the toplevel tree of the resulting merge. Merges also have
informational messages, such as:
* "Auto-merging <PATH>"
* "CONFLICT (content): ..."
* "CONFLICT (file/directory)"
* etc.
In fact, when non-content conflicts occur (such as file/directory,
modify/delete, add/add with differing modes, rename/rename (1to2),
etc.), these informational messages may be the only notification the
user gets since these conflicts are not representable in the contents
of the file.
Add a --[no-]messages option so that callers can request these messages
be included at the end of the output. Include such messages by default
when there are conflicts, and omit them by default when the merge is
clean.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the ability to perform real merges rather than just trivial
merges (meaning handling three way content merges, recursive ancestor
consolidation, renames, proper directory/file conflict handling, and so
forth). However, unlike `git merge`, the working tree and index are
left alone and no branch is updated.
The only output is:
- the toplevel resulting tree printed on stdout
- exit status of 0 (clean), 1 (conflicts present), anything else
(merge could not be performed; unknown if clean or conflicted)
This output is meant to be used by some higher level script, perhaps in
a sequence of steps like this:
NEWTREE=$(git merge-tree --write-tree $BRANCH1 $BRANCH2)
test $? -eq 0 || die "There were conflicts..."
NEWCOMMIT=$(git commit-tree $NEWTREE -p $BRANCH1 -p $BRANCH2)
git update-ref $BRANCH1 $NEWCOMMIT
Note that higher level scripts may also want to access the
conflict/warning messages normally output during a merge, or have quick
access to a list of files with conflicts. That is not available in this
preliminary implementation, but subsequent commits will add that
ability (meaning that NEWTREE would be a lot more than a tree in the
case of conflicts).
This also marks the traditional trivial merge of merge-tree as
deprecated. The trivial merge not only had limited applicability, the
output format was also difficult to work with (and its format
undocumented), and will generally be less performant than real merges.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let merge-tree accept a `--write-tree` parameter for choosing real
merges instead of trivial merges, and accept an optional
`--trivial-merge` option to get the traditional behavior. Note that
these accept different numbers of arguments, though, so these names
need not actually be used.
Note that real merges differ from trivial merges in that they handle:
- three way content merges
- recursive ancestor consolidation
- renames
- proper directory/file conflict handling
- etc.
Basically all the stuff you'd expect from `git merge`, just without
updating the index and working tree. The initial shell added here does
nothing more than die with "real merges are not yet implemented", but
that will be fixed in subsequent commits.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for adding a non-trivial merge capability to merge-tree,
move the existing merge logic for trivial merges into a new function.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-recursive.h defined its own merge_trees() function, different than
the one found in builtin/merge-tree.c. That was okay in the past, but
we want merge-tree to be able to use the merge-ort functions, which will
end up including merge-recursive.h. Rename the function found in
builtin/merge-tree.c to avoid the conflict.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds a command line option analogous to that of GNU
grep(1)'s -m / --max-count, which users might already be used to.
This makes it possible to limit the amount of matches shown in the
output while keeping the functionality of other options such as -C
(show code context) or -p (show containing function), which would be
difficult to do with a shell pipeline (e.g. head(1)).
Signed-off-by: Carlos López 00xc@protonmail.com
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With 31c8221a (mktree: validate entry type in input, 2009-05-14), we
called the sha1_object_info() API to obtain the type information, but
allowed the call to silently fail when the object was missing locally,
so that we can sanity-check the types opportunistically when the
object did exist.
The implementation is understandable because back then there was no
lazy/on-demand downloading of individual objects from the promisor
remotes that causes a long delay and materializes the object, hence
defeating the point of using "--missing". The design is hurting us
now.
We could bypass the opportunistic type/mode consistency check
altogether when "--missing" is given, but instead, use the
oid_object_info_extended() API and tell it that we are only interested
in objects that locally exist and are immediately available by passing
OBJECT_INFO_SKIP_FETCH_OBJECT bit to it. That way, we will still
retain the cheap and opportunistic sanity check for local objects.
Signed-off-by: Richard Oliver <roliver@roku.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After b489b9d9aa (branch: use branch_checked_out() when deleting refs,
2022-06-14), we no longer look at our local "worktrees" variable, since
branch_checked_out() handles it under the hood. The compiler didn't
notice the unused variable because we call functions to initialize and
free it (so it's not totally unused, it just doesn't do anything
useful).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 12d47e3b1f (fetch: use new branch_checked_out() and add tests,
2022-06-14), fetch's update_local_ref() function stopped using its
"worktrees" parameter. It doesn't need it, since the
branch_checked_out() function examines the global worktrees under the
hood.
So we can not only drop the unused parameter from that function, but
also from its entire call chain. And as we do so all the way up to
do_fetch(), we can see that nobody uses it at all, and we can drop the
local variable there entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is an option rather than command. Make the message convey this
similar to the other messages in the file.
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some config variables are combinations of multiple words, and we
typically write them in camelCase forms in manpage and translatable
strings. It's not easy to find mismatches for these camelCase config
variables during code reviews, but occasionally they are identified
during localization translations.
To check for mismatched config variables, I introduced a new feature
in the helper program for localization[^1]. The following mismatched
config variables have been identified by running the helper program,
such as "git-po-helper check-pot".
Lowercase in manpage should use camelCase:
* Documentation/config/http.txt: http.pinnedpubkey
Lowercase in translable strings should use camelCase:
* builtin/fast-import.c: pack.indexversion
* builtin/gc.c: gc.logexpiry
* builtin/index-pack.c: pack.indexversion
* builtin/pack-objects.c: pack.indexversion
* builtin/repack.c: pack.writebitmaps
* commit.c: i18n.commitencoding
* gpg-interface.c: user.signingkey
* http.c: http.postbuffer
* submodule-config.c: submodule.fetchjobs
Mismatched camelCases, choose the former:
* Documentation/config/transfer.txt: transfer.credentialsInUrl
remote.c: transfer.credentialsInURL
[^1]: https://github.com/git-l10n/git-po-helper
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, the git remote show command will query data from remotes to
show data about what might be done on a future git fetch. This process
currently does not handle negative refspecs. This can be confusing,
because the show command will list refs as if they would be fetched. For
example if the fetch refspec "^refs/heads/pr/*", it still displays the
following:
* remote jdk19
Fetch URL: git@github.com:openjdk/jdk19.git
Push URL: git@github.com:openjdk/jdk19.git
HEAD branch: master
Remote branches:
master tracked
pr/1 new (next fetch will store in remotes/jdk19)
pr/2 new (next fetch will store in remotes/jdk19)
pr/3 new (next fetch will store in remotes/jdk19)
Local ref configured for 'git push':
master pushes to master (fast-forwardable)
Fix this by adding an additional check inside of get_ref_states. If a
ref matches one of the negative refspecs, mark it as skipped instead of
marking it as new or tracked.
With this change, we now report remote branches that are skipped due to
negative refspecs properly:
* remote jdk19
Fetch URL: git@github.com:openjdk/jdk19.git
Push URL: git@github.com:openjdk/jdk19.git
HEAD branch: master
Remote branches:
master tracked
pr/1 skipped
pr/2 skipped
pr/3 skipped
Local ref configured for 'git push':
master pushes to master (fast-forwardable)
By showing the refs as skipped, it helps clarify that these references
won't actually be fetched.
This does not properly handle refs going stale due to a newly added
negative refspec. In addition, git remote prune doesn't handle that
negative refspec case either. Fixing that requires digging into
get_stale_heads and handling the case of a ref which exists on the
remote but is omitted due to a negative refspec locally.
Add a new test case which covers the functionality above, as well as a
new expected failure indicating the poor overlap with stale refs.
Reported-by: Pavel Rappo <pavel.rappo@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In c51f8f94e5 (submodule--helper: run update procedures from C,
2021-08-24), we added code that first obtains the default remote, and
then adds that to a `strvec`.
However, we never released the default remote's memory.
Reported by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various error messages that talk about the removal of
"--preserve-merges" in "rebase" have been strengthened, and "rebase
--abort" learned to get out of a state that was left by an earlier
use of the option.
* po/rebase-preserve-merges:
rebase: translate a die(preserve-merges) message
rebase: note `preserve` merges may be a pull config option
rebase: help users when dying with `preserve-merges`
rebase.c: state preserve-merges has been removed
"git revert" learns "--reference" option to use more human-readable
reference to the commit it reverts in the message template it
prepares for the user.
* jc/revert-show-parent-info:
revert: --reference should apply only to 'revert', not 'cherry-pick'
revert: optionally refer to commit in the "reference" format
This is the last current use of find_shared_symref() that can easily be
replaced by branch_checked_out(). The benefit of this switch is that the
code is a bit simpler, but also it is faster on repeated calls.
The remaining uses of find_shared_symref() are non-trivial to remove, so
we probably should not continue in that direction:
* builtin/notes.c uses find_shared_symref() with "NOTES_MERGE_REF"
instead of "HEAD", so it doesn't have an immediate analogue with
branch_checked_out(). Perhaps we should consider extending it to
include that symref in addition to HEAD, BISECT_HEAD, and
REBASE_HEAD.
* receive-pack.c checks to see if a worktree has a checkout for the ref
that is being updated. The tricky part is that it can actually decide
to update the worktree directly instead of just skipping the update.
This all depends on the receive.denyCurrentBranch config option. The
implementation currenty cares about receiving the worktree in the
result, so the current branch_checked_out() prototype is insufficient
currently. This is something to investigate later, though, since a
large number of refs could be updated at the same time and using the
strmap implementation of branch_checked_out() could be beneficial.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching refs from a remote, it is possible that the refspec will
cause use to overwrite a ref that is checked out in a worktree. The
existing logic in builtin/fetch.c uses a possibly-slow mechanism. Update
those sections to use the new, more efficient branch_checked_out()
helper.
These uses were not previously tested, so add a test case that can be
used for these kinds of collisions. There is only one test now, but more
tests will be added as other consumers of branch_checked_out() are
added.
Note that there are two uses in builtin/fetch.c, but only one of the
messages is tested. This is because the tested check is run before
completing the fetch, and the untested check is not reachable without
concurrent updates to the filesystem. Thus, it is beneficial to keep
that extra check for the sake of defense-in-depth. However, we should
not attempt to test the check, as the effort required is too
complicated to be worth the effort. This use in update_local_ref()
also requires a change in the error message because we no longer have
access to the worktree struct, only the path of the worktree. This error
is so rare that making a distinction between the two is not critical.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git show-ref --heads" (and "--tags") still iterated over all the
refs only to discard refs outside the specified area, which has
been corrected.
* tb/show-ref-optim:
builtin/show-ref.c: avoid over-iterating with --heads, --tags
Make use of the stream_loose_object() function introduced in the
preceding commit to unpack large objects. Before this we'd need to
malloc() the size of the blob before unpacking it, which could cause
OOM with very large blobs.
We could use the new streaming interface to unpack all blobs, but
doing so would be much slower, as demonstrated e.g. with this
benchmark using git-hyperfine[0]:
rm -rf /tmp/scalar.git &&
git clone --bare https://github.com/Microsoft/scalar.git /tmp/scalar.git &&
mv /tmp/scalar.git/objects/pack/*.pack /tmp/scalar.git/my.pack &&
git hyperfine \
-r 2 --warmup 1 \
-L rev origin/master,HEAD -L v "10,512,1k,1m" \
-s 'make' \
-p 'git init --bare dest.git' \
-c 'rm -rf dest.git' \
'./git -C dest.git -c core.bigFileThreshold={v} unpack-objects </tmp/scalar.git/my.pack'
Here we'll perform worse with lower core.bigFileThreshold settings
with this change in terms of speed, but we're getting lower memory use
in return:
Summary
'./git -C dest.git -c core.bigFileThreshold=10 unpack-objects </tmp/scalar.git/my.pack' in 'origin/master' ran
1.01 ± 0.01 times faster than './git -C dest.git -c core.bigFileThreshold=1k unpack-objects </tmp/scalar.git/my.pack' in 'origin/master'
1.01 ± 0.01 times faster than './git -C dest.git -c core.bigFileThreshold=1m unpack-objects </tmp/scalar.git/my.pack' in 'origin/master'
1.01 ± 0.02 times faster than './git -C dest.git -c core.bigFileThreshold=1m unpack-objects </tmp/scalar.git/my.pack' in 'HEAD'
1.02 ± 0.00 times faster than './git -C dest.git -c core.bigFileThreshold=512 unpack-objects </tmp/scalar.git/my.pack' in 'origin/master'
1.09 ± 0.01 times faster than './git -C dest.git -c core.bigFileThreshold=1k unpack-objects </tmp/scalar.git/my.pack' in 'HEAD'
1.10 ± 0.00 times faster than './git -C dest.git -c core.bigFileThreshold=512 unpack-objects </tmp/scalar.git/my.pack' in 'HEAD'
1.11 ± 0.00 times faster than './git -C dest.git -c core.bigFileThreshold=10 unpack-objects </tmp/scalar.git/my.pack' in 'HEAD'
A better benchmark to demonstrate the benefits of that this one, which
creates an artificial repo with a 1, 25, 50, 75 and 100MB blob:
rm -rf /tmp/repo &&
git init /tmp/repo &&
(
cd /tmp/repo &&
for i in 1 25 50 75 100
do
dd if=/dev/urandom of=blob.$i count=$(($i*1024)) bs=1024
done &&
git add blob.* &&
git commit -mblobs &&
git gc &&
PACK=$(echo .git/objects/pack/pack-*.pack) &&
cp "$PACK" my.pack
) &&
git hyperfine \
--show-output \
-L rev origin/master,HEAD -L v "512,50m,100m" \
-s 'make' \
-p 'git init --bare dest.git' \
-c 'rm -rf dest.git' \
'/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold={v} unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum'
Using this test we'll always use >100MB of memory on
origin/master (around ~105MB), but max out at e.g. ~55MB if we set
core.bigFileThreshold=50m.
The relevant "Maximum resident set size" lines were manually added
below the relevant benchmark:
'/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=50m unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'origin/master' ran
Maximum resident set size (kbytes): 107080
1.02 ± 0.78 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=512 unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'origin/master'
Maximum resident set size (kbytes): 106968
1.09 ± 0.79 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=100m unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'origin/master'
Maximum resident set size (kbytes): 107032
1.42 ± 1.07 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=100m unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'HEAD'
Maximum resident set size (kbytes): 107072
1.83 ± 1.02 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=50m unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'HEAD'
Maximum resident set size (kbytes): 55704
2.16 ± 1.19 times faster than '/usr/bin/time -v ./git -C dest.git -c core.bigFileThreshold=512 unpack-objects </tmp/repo/my.pack 2>&1 | grep Maximum' in 'HEAD'
Maximum resident set size (kbytes): 4564
This shows that if you have enough memory this new streaming method is
slower the lower you set the streaming threshold, but the benefit is
more bounded memory use.
An earlier version of this patch introduced a new
"core.bigFileStreamingThreshold" instead of re-using the existing
"core.bigFileThreshold" variable[1]. As noted in a detailed overview
of its users in [2] using it has several different meanings.
Still, we consider it good enough to simply re-use it. While it's
possible that someone might want to e.g. consider objects "small" for
the purposes of diffing but "big" for the purposes of writing them
such use-cases are probably too obscure to worry about. We can always
split up "core.bigFileThreshold" in the future if there's a need for
that.
0. https://github.com/avar/git-hyperfine/
1. https://lore.kernel.org/git/20211210103435.83656-1-chiyutianyi@gmail.com/
2. https://lore.kernel.org/git/20220120112114.47618-5-chiyutianyi@gmail.com/
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Derrick Stolee <stolee@gmail.com>
Helped-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Han Xin <chiyutianyi@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the name implies, "get_data(size)" will allocate and return a given
amount of memory. Allocating memory for a large blob object may cause the
system to run out of memory. Before preparing to replace calling of
"get_data()" to unpack large blob objects in latter commits, refactor
"get_data()" to reduce memory footprint for dry_run mode.
Because in dry_run mode, "get_data()" is only used to check the
integrity of data, and the returned buffer is not used at all, we can
allocate a smaller buffer and use it as zstream output. Make the function
return NULL in the dry-run mode, as no callers use the returned buffer.
The "find [...]objects/?? -type f | wc -l" test idiom being used here
is adapted from the same "find" use added to another test in
d9545c7f46 (fast-import: implement unpack limit, 2016-04-25).
Suggested-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Han Xin <chiyutianyi@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new bug() and BUG_if_bug() API is introduced to make it easier to
uniformly log "detect multiple bugs and abort in the end" pattern.
* ab/bug-if-bug:
cache-tree.c: use bug() and BUG_if_bug()
receive-pack: use bug() and BUG_if_bug()
parse-options.c: use optbug() instead of BUG() "opts" check
parse-options.c: use new bug() API for optbug()
usage.c: add a non-fatal bug() function to go with BUG()
common-main.c: move non-trace2 exit() behavior out of trace2.c
More fsmonitor--daemon.
* jh/builtin-fsmonitor-part3: (30 commits)
t7527: improve implicit shutdown testing in fsmonitor--daemon
fsmonitor--daemon: allow --super-prefix argument
t7527: test Unicode NFC/NFD handling on MacOS
t/lib-unicode-nfc-nfd: helper prereqs for testing unicode nfc/nfd
t/helper/hexdump: add helper to print hexdump of stdin
fsmonitor: on macOS also emit NFC spelling for NFD pathname
t7527: test FSMonitor on case insensitive+preserving file system
fsmonitor: never set CE_FSMONITOR_VALID on submodules
t/perf/p7527: add perf test for builtin FSMonitor
t7527: FSMonitor tests for directory moves
fsmonitor: optimize processing of directory events
fsm-listen-darwin: shutdown daemon if worktree root is moved/renamed
fsm-health-win32: force shutdown daemon if worktree root moves
fsm-health-win32: add polling framework to monitor daemon health
fsmonitor--daemon: stub in health thread
fsmonitor--daemon: rename listener thread related variables
fsmonitor--daemon: prepare for adding health thread
fsmonitor--daemon: cd out of worktree root
fsm-listen-darwin: ignore FSEvents caused by xattr changes on macOS
unpack-trees: initialize fsmonitor_has_run_once in o->result
...
