The .txt extensions were changed to .adoc in 1f010d6bdf (doc: use .adoc
extension for AsciiDoc files, 2025-01-20).
Do the same for contrib/subtree.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The .txt extensions were changed to .adoc in 1f010d6bdf (doc: use .adoc
extension for AsciiDoc files, 2025-01-20).
Do the same for contrib/contacts.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct the default target in Documentation/Makefile, and
future-proof all Makefiles from similar breakages by declaring the
default target (which happens to be "all") upfront.
* ad/set-default-target-in-makefiles:
Makefile: set default goals in makefiles
Wire up static analysis via Coccinelle via a new test target
"coccicheck". This target can be executed via `meson compile coccicheck`
and generates the semantic patch for us.
Note that we don't hardcode the list of source and header files that
shall be analyzed, and instead use git-ls-files(1) to find them for us.
This is because we also want to analyze files that may not get built on
the current platform, so finding all sources at configure time is easier
than introducing a new variable that tracks all sources, including those
which aren't being built.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We've got a couple of credential helpers in "contrib/credential", all
of which aren't yet wired up via Meson. Do so.
Note that ideally, we'd also wire up t0303 to be executed with each of
the credential helpers to verify their functionality. Unfortunately
though, none of them pass the test suite right now, so this is left for
a future change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "osxkeychain" helper does not compile due to a warning generated by
the unused `argc` parameter. Fix the warning by checking for the minimum
number of required arguments explicitly in the least restrictive way
possible.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "libsecret" credential helper does not compile when developer
warnings are enabled due to three warnings:
- contrib/credential/libsecret/git-credential-libsecret.c:78:1:
missing initializer for field ‘reserved’ of ‘SecretSchema’
[-Werror=missing-field-initializers]. This issue is fixed by using
designated initializers.
- contrib/credential/libsecret/git-credential-libsecret.c:171:43:
comparison of integer expressions of different signedness: ‘int’
and ‘guint’ {aka ‘unsigned int’} [-Werror=sign-compare]. This
issue is fixed by using an unsigned variable to iterate through
the string vector.
- contrib/credential/libsecret/git-credential-libsecret.c:420:14:
unused parameter ‘argc’ [-Werror=unused-parameter]. This issue is
fixed by checking the number of arguments, but in the least
restrictive way possible.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-credential-wincred helper does not compile on Windows with
Microsoft Visual Studio because of our use of `__attribute__()`, which
its compiler doesn't support. While the rest of our codebase would know
to handle this because we redefine the macro in "compat/msvc.h", this
stub isn't available here because we don't include "git-compat-util.h"
in the first place.
Fix the issue by making the attribute depend on the `_MSC_VER`
preprocessor macro.
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests of the "netrc" credential helper aren't prepared to handle
out-of-tree builds:
- They expect the "test.pl" script to be located relative to the build
directory, even though it is located in the source directory.
- They expect the built "git-credential-netrc" helper to be located
relative to the "test.pl" file, evne though it is loated in the
build directory.
This works alright as long as source and build directories are the same,
but starts to break apart with Meson.
Fix these first issue by using the new "GIT_SOURCE_DIR" variable to
locate the test script itself. And fix the second issue by introducing a
new environment variable "CREDENTIAL_NETRC_PATH" that can be set for
out-of-tree builds to locate the built credential helper.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of our tests require knowledge around where to find the
project's source directory in order to locate files required for the
test itself. Until now we have been wiring these up ad-hoc via new,
specialized variables catered to the specific usecase. This is quite
awkward though, as every test that potentially needs to locate paths
relative to the source directory needs to grow another variable.
Introduce a new "GIT_SOURCE_DIR" variable into GIT-BUILD-OPTIONS to stop
this proliferation. Remove existing variables that can be derived from
it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Explicitly set the default goal at the very top of various makefiles.
This is already present in some makefiles, but not all of them.
In particular, this corrects a regression introduced in a38edab7c8
(Makefile: generate doc versions via GIT-VERSION-GEN, 2024-12-06). That
commit added some config files as build targets for the Documentation
directory, and put the target configuration in a sensible place.
Unfortunately, that sensible place was above any other build target
definitions, meaning the default goal changed to being those
configuration files only, rather than the HTML and man page
documentation.
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Foreign language interface for Rust into our code base has been added.
* js/libgit-rust:
libgit: add higher-level libgit crate
libgit-sys: also export some config_set functions
libgit-sys: introduce Rust wrapper for libgit.a
common-main: split init and exit code into new files
The use of "echo -e" is not portable and not specified by POSIX. dash
does not support any options except "-n", and so this script will not
work on operating systems which use that as /bin/sh.
Fortunately, the solution is easy: switch to printf(1), which is
specified by POSIX and allows the escape sequences we want to use. This
will allow the script to work with any POSIX shell.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following the procedure we established to introduce breaking
changes for Git 3.0, allow an early opt-in for removing support of
$GIT_DIR/branches/ and $GIT_DIR/remotes/ directories to configure
remotes.
* ps/3.0-remote-deprecation:
remote: announce removal of "branches/" and "remotes/"
builtin/pack-redundant: remove subcommand with breaking changes
ci: repurpose "linux-gcc" job for deprecations
ci: merge linux-gcc-default into linux-gcc
Makefile: wire up build option for deprecated features
The C functions exported by libgit-sys do not provide an idiomatic Rust
interface. To make it easier to use these functions via Rust, add a
higher-level "libgit" crate, that wraps the lower-level configset API
with an interface that is more Rust-y.
This combination of $X and $X-sys crates is a common pattern for FFI in
Rust, as documented in "The Cargo Book" [1].
[1] https://doc.rust-lang.org/cargo/reference/build-scripts.html#-sys-packages
Co-authored-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for implementing a higher-level Rust API for accessing
Git configs, export some of the upstream configset API via libgitpub and
libgit-sys. Since this will be exercised as part of the higher-level API
in the next commit, no tests have been added for libgit-sys.
While we're at it, add git_configset_alloc() and git_configset_free()
functions in libgitpub so that callers can manage config_set structs on
the heap. This also allows non-C external consumers to treat config_sets
as opaque structs.
Co-authored-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce libgit-sys, a Rust wrapper crate that allows Rust code to call
functions in libgit.a. This initial patch defines build rules and an
interface that exposes user agent string getter functions as a proof of
concept. This library can be tested with `cargo test`. In later commits,
a higher-level library containing a more Rust-friendly interface will be
added at `contrib/libgit-rs`.
Symbols in libgit can collide with symbols from other libraries such as
libgit2. We avoid this by first exposing library symbols in
public_symbol_export.[ch]. These symbols are prepended with "libgit_" to
avoid collisions and set to visible using a visibility pragma. In
build.rs, Rust builds contrib/libgit-rs/libgit-sys/libgitpub.a, which also
contains libgit.a and other dependent libraries, with
-fvisibility=hidden to hide all symbols within those libraries that
haven't been exposed with a visibility pragma.
Co-authored-by: Kyle Lippincott <spectral@google.com>
Co-authored-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Kyle Lippincott <spectral@google.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The meson-driven build is now aware of "git-subtree" housed in
contrib/subtree hierarchy.
* ps/build-meson-subtree:
meson: wire up the git-subtree(1) command
meson: introduce build option for contrib
contrib/subtree: fix building docs
With 57ec9254eb (docs: introduce document to announce breaking changes,
2024-06-14), we have introduced a new document that tracks upcoming
breaking changes in the Git project. In 2454970930 (BreakingChanges:
early adopter option, 2024-10-11) we have amended the document a bit to
mention that any introduced breaking changes must be accompanied by
logic that allows us to enable the breaking change at compile-time.
While we already have two breaking changes lined up, neither of them has
such a switch because they predate those instructions.
Introduce the proposed `WITH_BREAKING_CHANGES` preprocessor macro and
wire it up with both our Makefiles and Meson. This does not yet wire up
the build flag for existing deprecations.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wire up the git-subtree(1) command, which is part of "contrib/". Note
that we have to move around the exact location where we include the
"contrib/" subdirectory so that it comes after building the docs so that
we have access to some of the common functionality.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We unconditionally wire up building command completion present in the
"contrib/" directory. This may or may not be what users want, and we
don't provide a way to disable it.
Introduce a new "contrib" build option. This option is introduced as an
array so that users can manually pick which exact features they want to
include from the "contrib" directory. By default, we build and install
shell completions, which is a commonly used feature and also the current
default.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a38edab7c8 (Makefile: generate doc versions via GIT-VERSION-GEN,
2024-12-06), we have refactored how we build our documentation by
injecting the Git version into the Asciidoc and AsciiDoctor config
files instead of doing so via arguments. As such, the original config
files were removed, where the expectation is that they get generated via
`GIT-VERSION-GEN` now.
Whie the git-subtree(1) command part of "contrib/" also builds docs
using these same config files, its Makefile wasn't adjusted accordingly
and thus building the docs is broken.
Fix this by using `GIT-VERSION-GEN` to generate those files.
Reported-by: Renato Botelho <garga@FreeBSD.org>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 1e0ee4087e (completion: add and use
__git_compute_first_level_config_vars_for_section, 2024-02-10) uses an
indirect variable syntax that is only valid for Bash, but the Zsh
completion code relies on the Bash completion code to function. Zsh
supports a different indirect variable expansion using ${(P)var}, but in
`emulate ksh` mode does not support Bash's ${!var}.
This manifests as completing strange config options like
"__git_first_level_config_vars_for_section_remote" as a choice for the
command line
git config set remote.
Using Zsh's C-x ? _complete_debug widget with the cursor at the end of
that command line captures a trace, in which we see (some details
elided):
+__git_complete_config_variable_name:7> __git_compute_first_level_config_vars_for_section remote
+__git_compute_first_level_config_vars_for_section:7> local section=remote
+__git_compute_first_level_config_vars_for_section:7> __git_compute_config_vars
+__git_compute_config_vars:7> test -n $'add.ignoreErrors\nadvice.addEmbeddedRepo\nadvice.addEmptyPathspec\nadvice.addIgnoredFile[…]'
+__git_compute_first_level_config_vars_for_section:7> local this_section=__git_first_level_config_vars_for_section_remote
+__git_compute_first_level_config_vars_for_section:7> test -n __git_first_level_config_vars_for_section_remote
+__git_complete_config_variable_name:7> local this_section=__git_first_level_config_vars_for_section_remote
+__git_complete_config_variable_name:7> __gitcomp_nl_append __git_first_level_config_vars_for_section_remote remote. '' ' '
+__gitcomp_nl_append:7> __gitcomp_nl __git_first_level_config_vars_for_section_remote remote. '' ' '
+__gitcomp_nl:7> emulate -L zsh
+__gitcomp_nl:7> compset -P '*[=:]'
+__gitcomp_nl:7> compadd -Q -S ' ' -p remote. -- __git_first_level_config_vars_for_section_remote
We perform the test for __git_compute_config_vars correctly, but the
${!this_section} references are not expanded as expected.
Instead, portably expand indirect references through the new
__git_indirect. Contrary to some versions you might find online [1],
this version avoids echo non-portabilities [2] [3] and correctly quotes
the indirect expansion after eval (so that the result is not split or
globbed before being handed to printf).
[1]: https://unix.stackexchange.com/a/41409/301073
[2]: https://askubuntu.com/questions/715765/mysterious-behavior-of-echo-command#comment1056038_715769
[3]: https://mywiki.wooledge.org/CatEchoLs
The following demo program demonstrates how this works:
b=1
indirect() {
eval printf '%s' "\"\$$1\""
}
f() {
# Comment this out to see that it works for globals, too. Or, use
# a value with spaces like '2 3 4' to see how it handles those.
local b=2
local a=b
test -n "$(indirect $a)" && echo nice
}
f
When placed in a file "demo", then both
bash -x demo
and
zsh -xc 'emulate ksh -c ". ./demo"' |& tail
provide traces showing that "$(indirect $a)" produces 2 (or 1, with the
global, or "2 3 4" as a single string, etc.).
Signed-off-by: D. Ben Knoble <ben.knoble+github@gmail.com>
Acked-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Building our "gitweb" interface is optional in our Makefile and in Meson
and not wired up at all with CMake, but disabling it causes a couple of
tests in the t950* range that pull in "t/lib-gitweb.sh". This is because
the test library knows to execute gitweb-tests based on whether or not
Perl is available, but we may have Perl available and still end up not
building gitweb e.g. with `make test NO_GITWEB=YesPlease`.
Fix this issue by wiring up a new "NO_GITWEB" build option so that we
can skip these tests in case gitweb is not built.
Note that this new build option requires us to move the configuration of
GIT-BUILD-OPTIONS to a later point in our Meson build instructions. But
as that file is only consumed by our tests at runtime this change does
not cause any issues.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variables declared and substituted in GIT-BUILD-OPTIONS are not
ordered in any obvious way. Sort them alphabetically so that it becomes
obvious where new variables should go.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Build fixes for Windows.
* js/ps-build-cmake-fixup:
cmake/vcxproj: stop special-casing `remote-ext`
cmake: put the Perl modules into the correct location again
cmake: use the correct file name for the Perl header
cmake(mergetools): better support for out-of-tree builds
cmake: better support for out-of-tree builds follow-up
When the `vcxproj` target was introduced in `config.mak.uname` to allow
building Git with the Visual C toolchain, the `git remote-ext` command
was always executed in its dashed form. Therefore, it was impossible to
pass the test suite unless that command existed in its dashed form, and
we had to special-case this.
Later, when the `vcxproj` target got out of fashion because Visual
Studio gained native support for CMake builds, this special-casing was
copied without questioning it.
But as of 675df192c5 (transport-helper: do not run git-remote-ext etc.
in dashed form, 2020-08-26), the reason for this special-casing no
longer exists. So let's just drop it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In ccfba9e0c4 (Makefile: use "generate-perl.sh" to massage Perl
library, 2024-12-06), the previous strategy (which avoided spawning a
shell script to transform the files) was replaced by the same
`generate-perl.sh` invocation as for the Makefile-based build.
The only difference is that now the transformation tries to handle the
Perl modules in-place (which ends up in empty files because the same
file is used as input and output via stdin/stdout redirection), and the
Perl script cannot find them anymore because they are not in the
expected place.
Let's put them into the expected place again, i.e. into
`perl/build/lib/` instead of `perl/`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In e4b488049a (Makefile: extract script to massage Perl scripts,
2024-12-06), the code was refactored that is used to transform the Perl
scripts/modules to their final form.
Even the CMake-based build was adjusted, but the change used the file
name `PERL-HEADER` instead of the file name used by the Makefile-based
build (same name but with the `GIT-` prefix). Let's adjust the former to
the latter.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 7e0730c8ba (t: better support for out-of-tree builds, 2024-12-06)
the strategy was changed from letting `t7609-mergetool--lib.sh`
hard-code the directory where it expects to find the merge tools to
hard-coding that value in the placeholder `@GIT_TEST_MERGE_TOOLS_DIR@`
that is replaced during the build.
However, likely due to a copy/paste mistake (and reviewers missed this,
too), the CMake-based build was adjusted incorrectly, replacing that
placeholder not with the path to the merge tools, but with a Boolean
indicating whether to use a runtime-generated path prefix or not.
Let's fix that, addressing this CMake-build's symptom:
Initialized empty Git repository in D:/a/git/git/t/trash directory.t7609-mergetool--lib/.git/
++ . true/vimdiff
./test-lib.sh: line 1021: true/vimdiff: No such file or directory
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 7e0730c8ba (t: better support for out-of-tree builds, 2024-12-06),
the `bin-wrappers/` strategy was changed so that it no longer hard-codes
the template directory to be `@BUILD_DIR@/templates/blt`, but instead
interpolates the `@TEMPLATE_DIR@` placeholder during the build.
However, this commit only adjusted the `Makefile`-based build.
Let's adjust the CMake-based build as well. This fixes t0000.15 which
would otherwise fail with:
++ echo ''\''t1234-verbose/err'\'' is not empty, it contains:'
't1234-verbose/err' is not empty, it contains:
++ cat t1234-verbose/err
warning: templates not found in @TEMPLATE_DIR@
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Build procedure update plus introduction of Meson based builds.
* ps/build: (24 commits)
Introduce support for the Meson build system
Documentation: add comparison of build systems
t: allow overriding build dir
t: better support for out-of-tree builds
Documentation: extract script to generate a list of mergetools
Documentation: teach "cmd-list.perl" about out-of-tree builds
Documentation: allow sourcing generated includes from separate dir
Makefile: simplify building of templates
Makefile: write absolute program path into bin-wrappers
Makefile: allow "bin-wrappers/" directory to exist
Makefile: refactor generators to be PWD-independent
Makefile: extract script to generate gitweb.js
Makefile: extract script to generate gitweb.cgi
Makefile: extract script to massage Python scripts
Makefile: extract script to massage Shell scripts
Makefile: use "generate-perl.sh" to massage Perl library
Makefile: extract script to massage Perl scripts
Makefile: consistently use PERL_PATH
Makefile: generate doc versions via GIT-VERSION-GEN
Makefile: generate "git.rc" via GIT-VERSION-GEN
...
* ps/build: (24 commits)
Introduce support for the Meson build system
Documentation: add comparison of build systems
t: allow overriding build dir
t: better support for out-of-tree builds
Documentation: extract script to generate a list of mergetools
Documentation: teach "cmd-list.perl" about out-of-tree builds
Documentation: allow sourcing generated includes from separate dir
Makefile: simplify building of templates
Makefile: write absolute program path into bin-wrappers
Makefile: allow "bin-wrappers/" directory to exist
Makefile: refactor generators to be PWD-independent
Makefile: extract script to generate gitweb.js
Makefile: extract script to generate gitweb.cgi
Makefile: extract script to massage Python scripts
Makefile: extract script to massage Shell scripts
Makefile: use "generate-perl.sh" to massage Perl library
Makefile: extract script to massage Perl scripts
Makefile: consistently use PERL_PATH
Makefile: generate doc versions via GIT-VERSION-GEN
Makefile: generate "git.rc" via GIT-VERSION-GEN
...
End-user experience of "git mergetool" when the command errors out
has been improved.
* pb/mergetool-errors:
git-difftool--helper.sh: exit upon initialize_merge_tool errors
git-mergetool--lib.sh: add error message for unknown tool variant
git-mergetool--lib.sh: add error message if 'setup_user_tool' fails
git-mergetool--lib.sh: use TOOL_MODE when erroring about unknown tool
completion: complete '--tool-help' in 'git mergetool'
Introduce support for the Meson build system, a "modern" meta build
system that supports many different platforms, including Linux, macOS,
Windows and BSDs. Meson supports different backends, including Ninja,
Xcode and Microsoft Visual Studio. Several common IDEs provide an
integration with it.
The biggest contender compared to Meson is probably CMake as outlined in
our "Documentation/technical/build-systems.txt" file. Based on my own
personal experience from working with both build systems extensively I
strongly favor Meson over CMake. In my opinion, it feels significantly
easier to use with a syntax that feels more like a "real" programming
language. The second big reason is that Meson supports Rust natively,
which may prove to be important given that the project may pick up Rust
as another language eventually.
Using Meson is rather straight-forward. An example:
```
# Meson uses out-of-tree builds. You can set up multiple build
# directories, how you name them is completely up to you.
$ mkdir build
$ cd build
$ meson setup .. -Dprefix=/tmp/git-installation
# Build the project. This also provides several other targets like
e.g. `install` or `test`.
$ ninja
# Meson has been wired up to support execution of our test suites.
# Both our unit tests and our integration tests are supported.
# Running `meson test` without any arguments will execute all tests,
# but the syntax supports globbing to select only some tests.
$ meson test 't-*'
# Execute single test interactively to allow for debugging.
$ meson test 't0000-*' --interactive --test-args=-ix
```
The build instructions have been successfully tested on the following
systems, tests are passing:
- Apple macOS 10.15.
- FreeBSD 14.1.
- NixOS 24.11.
- OpenBSD 7.6.
- Ubuntu 24.04.
- Windows 10 with Cygwin.
- Windows 10 with MinGW64, except for t9700, which is also broken with
our Makefile.
- Windows 10 with Visual Studio 2022 toolchain, using the Native Tools
Command Prompt with `meson setup --vsenv`. Tests pass, except for
t9700.
- Windows 10 with Visual Studio 2022 solution, using the Native Tools
Command Prompt with `meson setup --backend vs2022`. Tests pass,
except for t9700.
- Windows 10 with VS Code, using the Meson plug-in.
It is expected that there will still be rough edges in the current
version. If this patch lands the expectation is that it will coexist
with our other build systems for a while. Like this, distributions can
slowly migrate over to Meson and report any findings they have to us
such that we can continue to iterate. A potential cutoff date for other
build systems may be Git 3.0.
Some notes:
- The installed distribution is structured somewhat differently than
how it used to be the case. All of our binaries are installed into
`$libexec/git-core`, while all binaries part of `$bindir` are now
symbolic links pointing to the former. This rule is consistent in
itself and thus easier to reason about.
- We do not install dashed binaries into `$libexec/git-core` anymore,
so there won't e.g. be a symlink for git-add(1). These are not
required by modern Git and there isn't really much of a use case for
those anymore. By not installing those symlinks we thus start the
deprecation of this layout.
- We're targeting Meson 1.3.0, which has been released relatively
recently November 2023. The only feature we use from that version is
`fs.relative_to()`, which we could replace if necessary. If so, we
could start to target Meson 1.0.0 and newer, released in December
2022.
- The whole build instructions count around 3300 lines, half of which
is listing all of our code and test files. Our Makefiles are around
5000 lines, autoconf adds another 1300 lines. CMake in comparison
has only 1200 linescode, but it avoids listing individual files and
does not wire up auto-configuration as extensively as the Meson
instructions do.
- We bundle a set of subproject wrappers for curl, expat, openssl,
pcre2 and zlib. This allows developers to build Git without these
dependencies preinstalled, and Meson will fetch and build them
automatically. This is especially helpful on Windows.
Helped-by: Eli Schwartz <eschwartz@gentoo.org>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our in-tree builds used by the Makefile use various different build
directories scattered around different locations. The paths to those
build directories have to be propagated to our tests such that they can
find the contained files. This is done via a mixture of hardcoded paths
in our test library and injected variables in our bin-wrappers or
"GIT-BUILD-OPTIONS".
The latter two mechanisms are preferable over using hardcoded paths. For
one, we have all paths which are subject to change stored in a small set
of central files instead of having the knowledge of build paths in many
files. And second, it allows build systems which build files elsewhere
to adapt those paths based on their own needs. This is especially nice
in the context of build systems that use out-of-tree builds like CMake
or Meson.
Remove hardcoded knowledge of build paths from our test library and move
it into our bin-wrappers and "GIT-BUILD-OPTIONS".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we install Git we also install a set of default templates that both
git-init(1) and git-clone(1) populate into our build directories. The
way the pristine templates are laid out in our source directory is
somewhat weird though: instead of reconstructing the actual directory
hierarchy in "templates/", we represent directory separators with "--".
The only reason I could come up with for why we have this is the
"branches/" directory, which is supposed to be empty when installing it.
And as Git famously doesn't store empty directories at all we have to
work around this limitation.
Now the thing is that the "branches/" directory is a leftover to how
branches used to be stored in the dark ages. gitrepository-layout(5)
lists this directory as "slightly deprecated", which I would claim is a
strong understatement. I have never encountered anybody using it today
and would be surprised if it even works as expected. So having the "--"
hack in place for an item that is basically unused, unmaintained and
deprecated doesn't only feel unreasonable, but installing that entry by
default may also cause confusion for users that do not know what this is
supposed to be in the first place.
Remove this directory from our templates and, now that we do not require
the workaround anymore, restructure the templates to form a proper
hierarchy. This makes it way easier for build systems to install these
templates into place.
We should likely think about removing support for "branch/" altogether,
but that is outside of the scope of this patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Write the absolute program path into our bin-wrappers. This allows us to
simplify the Meson build instructions we are about to introduce a bit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "bin-wrappers/" directory gets created by our build system and is
populated with one script for each of our binaries. There isn't anything
inherently wrong with the current layout, but it is somewhat hard to
adapt for out-of-tree build systems.
Adapt the layout such that our "bin-wrappers/" directory always exists
and contains our "wrap-for-bin.sh" script to make things a little bit
easier for subsequent steps.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have multiple scripts that generate headers from other data. All of
these scripts have the assumption built-in that they are executed in the
current source directory, which makes them a bit unwieldy to use during
out-of-tree builds.
Refactor them to instead take the source directory as well as the output
file as arguments.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract a script that massages Python scripts. This provides a couple of
benefits:
- The build logic is deduplicated across Make, CMake and Meson.
- CMake learns to rewrite scripts as-needed at build time instead of
only writing them at configure time.
Furthermore, we will use this script when introducing Meson to
deduplicate the logic across build systems.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Same as in the preceding commits, extract a script that allows us to
unify how we massage shell scripts.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend "generate-perl.sh" such that it knows to also massage the Perl
library files. There are two major differences:
- We do not read in the Perl header. This is handled by matching on
whether or not we have a Perl shebang.
- We substitute some more variables, which we read in via our
GIT-BUILD-OPTIONS.
Adapt both our Makefile and the CMake build instructions to use this.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the script to inject various build-time parameters into our Perl
scripts into a standalone script. This is done such that we can reuse it
in other build systems.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When injecting the Perl path into our scripts we sometimes use '@PERL@'
while we othertimes use '@PERL_PATH@'. Refactor the code use the latter
consistently, which makes it easier to reuse the same logic for multiple
scripts.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git.rc" is used on Windows to embed information like the project
name and version into the resulting executables. As such we need to
inject the version information, which we do by using preprocessor
defines. The logic to do so is non-trivial and needs to be kept in sync
with the different build systems.
Refactor the logic so that we generate "git.rc" via `GIT-VERSION-GEN`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
