"git fetch" learned to pay attention to "fetch.all" configuration
variable, which pretends as if "--all" was passed from the command
line when no remote parameter was given.
* tb/fetch-all-configuration:
fetch: add new config option fetch.all
Introduce a new extension "refstorage" so that we can mark a
repository that uses a non-default ref backend, like reftable.
* ps/refstorage-extension:
t9500: write "extensions.refstorage" into config
builtin/clone: introduce `--ref-format=` value flag
builtin/init: introduce `--ref-format=` value flag
builtin/rev-parse: introduce `--show-ref-format` flag
t: introduce GIT_TEST_DEFAULT_REF_FORMAT envvar
setup: introduce GIT_DEFAULT_REF_FORMAT envvar
setup: introduce "extensions.refStorage" extension
setup: set repository's formats on init
setup: start tracking ref storage format
refs: refactor logic to look up storage backends
worktree: skip reading HEAD when repairing worktrees
t: introduce DEFAULT_REPO_FORMAT prereq
Unlike other environment variables that took the usual
true/false/yes/no as well as 0/1, GIT_FLUSH only understood 0/1,
which has been corrected.
* cp/git-flush-is-an-env-bool:
write-or-die: make GIT_FLUSH a Boolean environment variable
Streaming spans of packfile data used to be done only from a
single, primary, pack in a repository with multiple packfiles. It
has been extended to allow reuse from other packfiles, too.
* tb/multi-pack-verbatim-reuse: (26 commits)
t/perf: add performance tests for multi-pack reuse
pack-bitmap: enable reuse from all bitmapped packs
pack-objects: allow setting `pack.allowPackReuse` to "single"
t/test-lib-functions.sh: implement `test_trace2_data` helper
pack-objects: add tracing for various packfile metrics
pack-bitmap: prepare to mark objects from multiple packs for reuse
pack-revindex: implement `midx_pair_to_pack_pos()`
pack-revindex: factor out `midx_key_to_pack_pos()` helper
midx: implement `midx_preferred_pack()`
git-compat-util.h: implement checked size_t to uint32_t conversion
pack-objects: include number of packs reused in output
pack-objects: prepare `write_reused_pack_verbatim()` for multi-pack reuse
pack-objects: prepare `write_reused_pack()` for multi-pack reuse
pack-objects: pass `bitmapped_pack`'s to pack-reuse functions
pack-objects: keep track of `pack_start` for each reuse pack
pack-objects: parameterize pack-reuse routines over a single pack
pack-bitmap: return multiple packs via `reuse_partial_packfile_from_bitmap()`
pack-bitmap: simplify `reuse_partial_packfile_from_bitmap()` signature
ewah: implement `bitmap_is_empty()`
pack-bitmap: pass `bitmapped_pack` struct to pack-reuse functions
...
The builtin_objectmode attribute is populated for each path
without adding anything in .gitattributes files, which would be
useful in magic pathspec, e.g., ":(attr:builtin_objectmode=100755)"
to limit to executables.
* jw/builtin-objectmode-attr:
attr: add builtin objectmode values support
Doc update.
* js/contributor-docs-updates:
SubmittingPatches: hyphenate non-ASCII
SubmittingPatches: clarify GitHub artifact format
SubmittingPatches: clarify GitHub visual
SubmittingPatches: provide tag naming advice
SubmittingPatches: update extra tags list
SubmittingPatches: discourage new trailers
SubmittingPatches: drop ref to "What's in git.git"
CodingGuidelines: write punctuation marks
CodingGuidelines: move period inside parentheses
This is more correct because the <path>... doc syntax already indicates
that the arg is "array-type". It's how other tools do it. Finally, the
later document text mentions 'path' arguments, while it doesn't mention
'paths'.
Signed-off-by: Britton Leo Kerin <britton.kergin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Doc update.
* ml/doc-merge-updates:
Documentation/git-merge.txt: use backticks for command wrapping
Documentation/git-merge.txt: fix reference to synopsis
Introduce a boolean configuration option fetch.all which allows to
fetch all available remotes by default. The config option can be
overridden by explicitly specifying a remote or by using --no-all.
The behavior for --all is unchanged and calling git-fetch with --all
and a remote will still result in an error.
Additionally, describe the configuration variable in the config
documentation and implement new tests to cover the expected behavior.
Also add --no-all to the command-line documentation of git-fetch.
Signed-off-by: Tamino Bauknecht <dev@tb6.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 52d59cc645 (branch: add a --copy (-c) option to go with --move
(-m), 2017-06-18) <oldbranch> is used in more operations than just -m.
Let's also clarify what we do if <oldbranch> is omitted.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation should mention the default behavior.
It is better to explain the persistent nature of the
--reschedule-failed-exec flag from the user standpoint, rather than from
the implementation standpoint.
Signed-off-by: Illia Bobyr <illia.bobyr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Among Git's environment variables, the ones marked as "Boolean"
accept values in a way similar to Boolean configuration variables,
i.e. values like 'yes', 'on', 'true' and positive numbers are
taken as "on" and values like 'no', 'off', 'false' are taken as
"off".
GIT_FLUSH can be used to force Git to use non-buffered I/O when
writing to stdout. It can only accept two values, '1' which causes
Git to flush more often and '0' which makes all output buffered.
Make GIT_FLUSH accept more values besides '0' and '1' by turning it
into a Boolean environment variable, modifying the required logic.
Update the related documentation.
Signed-off-by: Chandra Pratap <chandrapratap3519@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 62db5247 (rebase -i: generate the script via
rebase--helper, 2017-07-14), the short hash is given in
rebase-todo. Specifying rebase.instructionFormat does not alter this
behavior, contrary to what the documentation implies.
Signed-off-by: Maarten van der Schrieck <maarten@thingsconnected.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Doc updates to clarify what an "unborn branch" means.
* jc/orphan-unborn:
orphan/unborn: fix use of 'orphan' in end-user facing messages
orphan/unborn: add to the glossary and use them consistently
Introduce a new `--ref-format` value flag for git-clone(1) that allows
the user to specify the ref format that is to be used for a newly
initialized repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new `--ref-format` value flag for git-init(1) that allows
the user to specify the ref format that is to be used for a newly
initialized repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new `--show-ref-format` to git-rev-parse(1) that causes it
to print the ref format used by a repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new GIT_DEFAULT_REF_FORMAT environment variable that lets
users control the default ref format used by both git-init(1) and
git-clone(1). This is modeled after GIT_DEFAULT_OBJECT_FORMAT, which
does the same thing for the repository's object format.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "extensions.refStorage" extension that allows us to
specify the ref storage format used by a repository. For now, the only
supported format is the "files" format, but this list will likely soon
be extended to also support the upcoming "reftable" format.
There have been discussions on the Git mailing list in the past around
how exactly this extension should look like. One alternative [1] that
was discussed was whether it would make sense to model the extension in
such a way that backends are arbitrarily stackable. This would allow for
a combined value of e.g. "loose,packed-refs" or "loose,reftable", which
indicates that new refs would be written via "loose" files backend and
compressed into "packed-refs" or "reftable" backends, respectively.
It is arguable though whether this flexibility and the complexity that
it brings with it is really required for now. It is not foreseeable that
there will be a proliferation of backends in the near-term future, and
the current set of existing formats and formats which are on the horizon
can easily be configured with the much simpler proposal where we have a
single value, only.
Furthermore, if we ever see that we indeed want to gain the ability to
arbitrarily stack the ref formats, then we can adapt the current
extension rather easily. Given that Git clients will refuse any unknown
value for the "extensions.refStorage" extension they would also know to
ignore a stacked "loose,packed-refs" in the future.
So let's stick with the easy proposal for the time being and wire up the
extension.
[1]: <pull.1408.git.1667846164.gitgitgadget@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gives all paths builtin objectmode values based on the paths' modes
(one of 100644, 100755, 120000, 040000, 160000). Users may use
this feature to filter by file types. For example a pathspec such as
':(attr:builtin_objectmode=160000)' could filter for submodules without
needing to have `builtin_objectmode=160000` to be set in .gitattributes
for every submodule path.
These values are also reflected in `git check-attr` results.
If the git_attr_direction is set to GIT_ATTR_INDEX or GIT_ATTR_CHECKIN
and a path is not found in the index, the value will be unspecified.
This patch also reserves the builtin_* attribute namespace for objectmode
and any future builtin attributes. Any user defined attributes using this
reserved namespace will result in a warning. This is a breaking change for
any existing builtin_* attributes.
Pathspecs with some builtin_* attribute name (excluding builtin_objectmode)
will behave like any attribute where there are no user specified values.
Signed-off-by: Joanna Wang <jojwang@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git documentation does this with the exception of ancient release notes.
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GitHub wraps artifacts generated by workflows in a .zip file.
Internally, workflows can package anything they like in them.
A recently generated failure artifact had the form:
windows-artifacts.zip
Length Date Time Name
--------- ---------- ----- ----
76001695 12-19-2023 01:35 artifacts.tar.gz
11005650 12-19-2023 01:35 tracked.tar.gz
--------- -------
87007345 2 files
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GitHub has two general forms for its states, sometimes they're a simple
colored object (e.g. green check or red x), and sometimes there's also a
colored container (e.g. green box or red circle) which contains that
object (e.g. check or x).
That's a lot of words to try to describe things, but in general, the key
for a failure is that it's recognized as an `x` and that it's associated
with the color red -- the color of course is problematic for people who
are red-green color-blind, but that's why they are paired with distinct
shapes.
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current statistics show a strong preference to only capitalize the first
letter in a hyphenated tag, but that some guidance would be helpful:
git log |
perl -ne 'next unless /^\s+(?:Signed-[oO]ff|Acked)-[bB]y:/;
s/^\s+//;s/:.*/:/;print'|
sort|uniq -c|sort -n
2 Signed-off-By:
4 Signed-Off-by:
22 Acked-By:
47 Signed-Off-By:
2202 Acked-by:
95315 Signed-off-by:
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There seems to be consensus amongst the core Git community on a working
set of common trailers, and there are non-trivial costs to people
inventing new trailers (research to discover what they mean/how they
differ from existing trailers) such that inventing new ones is generally
unwarranted and not something to be recommended to new contributors.
Suggested-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The contents within parenthesis should be omittable without resulting
in broken text.
Eliding the parenthesis left a period to end a run without any content.
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Doc updates.
* jc/doc-most-refs-are-not-that-special:
docs: MERGE_AUTOSTASH is not that special
docs: AUTO_MERGE is not that special
refs.h: HEAD is not that special
git-bisect.txt: BISECT_HEAD is not that special
git.txt: HEAD is not that special
"git checkout -B <branch> [<start-point>]" allowed a branch that is
in use in another worktree to be updated and checked out, which
might be a bit unexpected. The rule has been tightened, which is a
breaking change. "--ignore-other-worktrees" option is required to
unbreak you, if you are used to the current behaviour that "-B"
overrides the safety.
* jc/checkout-B-branch-in-use:
checkout: forbid "-B <branch>" from touching a branch used elsewhere
checkout: refactor die_if_checked_out() caller
As René found in the guidance from CodingGuidelines:
Literal examples (e.g. use of command-line options, command names,
branch names, URLs, pathnames (files and directories), configuration
and environment variables) must be typeset in monospace (i.e. wrapped
with backticks)
So all instances of single and double quotes for wraping said examples
were replaced with simple backticks.
Suggested-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Michael Lohmann <mi.al.lohmann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
437591a9d7 combined the synopsis of "The second syntax" (meaning `git
merge --abort`) and "The third syntax" (for `git merge --continue`) into
this single line:
git merge (--continue | --abort | --quit)
but it was still referred to when describing the preconditions that have
to be fulfilled to run the respective actions. In other words:
References by number are no longer valid after a merge of some of the
synopses.
Also the previous version of the documentation did not acknowledge that
`--no-commit` would result in the precondition being fulfilled (thanks
to Elijah Newren and Junio C Hamano for pointing that out).
This change also groups `--abort` and `--continue` together when
explaining the prerequisites in order to avoid duplication.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Michael Lohmann <mi.al.lohmann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge-file" learned to take the "--diff-algorithm" option to
use algorithm different from the default "myers" diff.
* ad/merge-file-diff-algo:
merge-file: add --diff-algorithm option
