Now that hashamp has lazy initialization and a HASHMAP_INIT macro,
hashmaps allocated on the stack can be initialized without a call to
hashmap_init() and in some cases makes the code a bit shorter. Convert
some callsites over to take advantage of this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the verison negotiation phase between "receive-pack" and
"proc-receive", "proc-receive" can send an empty flush-pkt to end the
negotiation and use default version 0. Capabilities (such as
"push-options") are not supported in version 0.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes found a flaky hang in `t5411/test-0013-bad-protocol.sh` in the
osx-clang job of the CI/PR builds, and ran into an issue when using
the `--stress` option with the following error messages:
fatal: unable to write flush packet: Broken pipe
send-pack: unexpected disconnect while reading sideband packet
fatal: the remote end hung up unexpectedly
In this test case, the "proc-receive" hook sends an error message and
dies earlier. While "receive-pack" on the other side of the pipe
should forward the error message of the "proc-receive" hook to the
client side, but it fails to do so. This is because "receive-pack"
uses `packet_write_fmt()` and `packet_flush()` to write pkt-line
message to "proc-receive" hook, and these functions die immediately
when pipe is broken. Using "gently" forms for these functions will get
more predicable output.
Add more "--die-*" options to test helper to test different stages of
the protocol between "receive-pack" and "proc-receive" hook.
Reported-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We taught rev-list a new way to separate options from revisions in
19e8789b23 (revision: allow --end-of-options to end option parsing,
2019-08-06), but rev-parse uses its own parser. It should know about
--end-of-options not only for consistency, but because it may be
presented with similarly ambiguous cases. E.g., if a caller does:
git rev-parse "$rev" -- "$path"
to parse an untrusted input, then it will get confused if $rev contains
an option-like string like "--local-env-vars". Or even "--not-real",
which we'd keep as an option to pass along to rev-list.
Or even more importantly:
git rev-parse --verify "$rev"
can be confused by options, even though its purpose is safely parsing
untrusted input. On the plus side, it will always fail the --verify
part, as it will not have parsed a revision, so the caller will
generally "fail closed" rather than continue to use the untrusted
string. But it will still trigger whatever option was in "$rev"; this
should be mostly harmless, since rev-parse options are all read-only,
but I didn't carefully audit all paths.
This patch lets callers write:
git rev-parse --end-of-options "$rev" -- "$path"
and:
git rev-parse --verify --end-of-options "$rev"
which will both treat "$rev" always as a revision parameter. The latter
is a bit clunky. It would be nicer if we had defined "--verify" to
require that its next argument be the revision. But we have not
historically done so, and:
git rev-parse --verify -q "$rev"
does currently work. I added a test here to confirm that we didn't break
that.
A few implementation notes:
- We don't document --end-of-options explicitly in commands, but rather
in gitcli(7). So I didn't give it its own section in git-rev-parse(1).
But I did call it out specifically in the --verify section, and
include it in the examples, which should show best practices.
- We don't have to re-indent the main option-parsing block, because we
can combine our "did we see end of options" check with "does it start
with a dash". The exception is the pre-setup options, which need
their own block.
- We do however have to pull the "--" parsing out of the "does it start
with dash" block, because we want to parse it even if we've seen
--end-of-options.
- We'll leave "--end-of-options" in the output. This is probably not
technically necessary, as a careful caller will do:
git rev-parse --end-of-options $revs -- $paths
and anything in $revs will be resolved to an object id. However, it
does help a slightly less careful caller like:
git rev-parse --end-of-options $revs_or_paths
where a path "--foo" will remain in the output as long as it also
exists on disk. In that case, it's helpful to retain --end-of-options
to get passed along to rev-list, s it would otherwise see just
"--foo".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option-parsing loop of rev-parse checks whether the first character
of an arg is "-". If so, then it enters a series of conditionals
checking for individual options. But some options are inexplicably
outside of that outer conditional.
This doesn't produce the wrong behavior; the conditional is actually
redundant with the individual option checks, and it's really only its
fallback "continue" that we care about. But we should at least be
consistent.
One obvious alternative is that we could get rid of the conditional
entirely. But we'll be using the extra block it provides in the next
patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because of the order in which we check options in rev-parse, there are a
few options we accept even after a "--". This is wrong, because the
whole point of "--" is to say "everything after here is a path". Let's
move the "did we see a dashdash" check (it's called "as_is" in the code)
to the top of the parsing loop.
Note there is one subtlety here. The options are ordered so that some
are checked before we even see if we're in a repository (they continue
the loop, and if we get past a certain point, then we do the repository
setup). By moving the as_is check higher, it's also in that "before
setup" section, even though it might look at the repository via
verify_filename(). However, this works out: we'd never set as_is until
we parse "--", and we don't parse that until after doing the setup.
An alternative here to avoid the subtlety is to put the as_is check at
the top of the post-setup options. But then every pre-setup option would
have to remember to check "if (!as_is && !strcmp(...))". So while this
is a bit magical, it's harder for future code to get wrong.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the past 15 years, we've used the hardcoded 64 as the length
limit of the filename of the output from the "git format-patch"
command. Since the value is shorter than the 80-column terminal, it
could grow without line wrapping a bit. At the same time, since the
value is longer than half of the 80-column terminal, we could fit
two or more of them in "ls" output on such a terminal if we allowed
to lower it.
Introduce a new command line option --filename-max-length=<n> and a
new configuration variable format.filenameMaxLength to override the
hardcoded default.
While we are at it, remove a check that the name of output directory
does not exceed PATH_MAX---this check is pointless in that by the
time control reaches the function, the caller would already have
done an equivalent of "mkdir -p", so if the system does not like an
overly long directory name, the control wouldn't have reached here,
and otherwise, we know that the system allowed the output directory
to exist. In the worst case, we will get an error when we try to
open the output file and handle the error correctly anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exit codes from "git remote add" etc. were not usable by scripted
callers.
* ab/git-remote-exit-code:
remote: add meaningful exit code on missing/existing
"git checkout-index" did not consistently signal an error with its
exit status.
* jk/checkout-index-errors:
checkout-index: propagate errors to exit code
checkout-index: drop error message from empty --stage=all
Now that all the external users of head_hash have been converted to
use a opts->orig_head instead we can stop returning head_hash from
get_revision_ranges().
Because we want to pass the full object names back to the caller in
`revisions` the find_unique_abbrev_r() call that was used to initialize
`head_hash` is replaced with oid_to_hex().
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than passing a string around pass the struct object_id that the
string was created from call oid_hex() when we write the file.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have a struct object_id containing the oid that we want to
set ORIG_HEAD to so use that rather than converting it to a string and
then calling get_oid() on that string.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After rebasing, ORIG_HEAD is supposed to point to the old HEAD of the
rebased branch. The code used find_unique_abbrev() to obtain the
object name of the old HEAD and wrote to both
.git/rebase-merge/orig-head (used by `rebase --abort` to go back to
the previous state) and to ORIG_HEAD. The buffer find_unique_abbrev()
gives back is volatile, unfortunately, and was overwritten after the
former file is written but before ORIG_FILE is written, leaving an
incorrect object name in it.
Avoid relying on the volatile buffer of find_unique_abbrev(), and
instead supply our own buffer to keep the object name.
I think that all of the users of head_hash should actually be using
opts->orig_head instead as passing a string rather than a struct
object_id around is a hang over from the scripted implementation. This
patch just fixes the immediate bug and adds a regression test based on
Caspar's reproduction example[1]. The users will be converted to use
struct object_id and head_hash removed in the next few commits.
[1] https://lore.kernel.org/git/CAFzd1+7PDg2PZgKw7U0kdepdYuoML9wSN4kofmB_-8NHrbbrHg@mail.gmail.com
Reported-by: Caspar Duregger <herr.kaste@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We've never intended to support diff's --output option in format-patch.
And until baa4adc66a (parse-options: disable option abbreviation with
PARSE_OPT_KEEP_UNKNOWN, 2019-01-27), it was impossible to trigger. We
first parse the format-patch options before handing the remainder off to
setup_revisions(). Before that commit, we'd accept "--output=foo" as an
abbreviation for "--output-directory=foo". But afterwards, we don't
check abbreviations, and --output gets passed to the diff code.
This results in nonsense behavior and bugs. The diff code will have
opened a filehandle at rev.diffopt.file, but we'll overwrite that with
our own handles that we open for each individual patch file. So the
--output file will always just be empty. But worse, the diff code also
sets rev.diffopt.close_file, so log_tree_commit() will close the
filehandle itself. And then the main loop in cmd_format_patch() will try
to close it again, resulting in a double-free.
The simplest solution would be to just disallow --output with
format-patch, as nobody ever intended it to work. However, we have
accidentally documented it (because format-patch includes diff-options).
And it does work with "git log", which writes the whole output to the
specified file. It's easy enough to make that work for format-patch,
too: it's really the same as --stdout, but pointed at a specific file.
We can detect the use of the --output option by the "close_file" flag
(note that we can't use rev.diffopt.file, since the diff setup will
otherwise set it to stdout). So we just need to unset that flag, but
don't have to do anything else. Our situation is otherwise exactly like
--stdout (note that we don't fclose() the file, but nor does the stdout
case; exiting the program takes care of that for us).
Reported-by: Johannes Postler <johannes.postler@txture.io>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In format-patch we're either outputting to stdout or to individual files
in an output directory (which may be just "./"). Our logic for whether
to open a new file for each patch is checked with "!use_stdout", but it
is equally correct to check for a non-NULL output_directory.
The distinction will matter when we add a new single-stream output in a
future patch, when only one of the three methods will want individual
files. Let's swap the logic here in preparation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --stdout and --output-directory options are mutually exclusive, but
it's hard to tell from reading the code. We have three separate
conditionals that check for use_stdout, and it's only after we've set up
the output_directory fully that we check whether the user also specified
--stdout.
Instead, let's check the exclusion explicitly first, then have a single
conditional that handles stdout versus an output directory. This is
slightly easier to follow now, and also will keep things sane when we
add another output mode in a future patch.
We'll add a few tests as well, covering the mutual exclusion and the
fact that we are not confused by a configured output directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -L option is documented to accept no pathspec, but the
command line option parser has allowed the combination without
checking so far. Ensure that there is no pathspec when the -L
option is in effect to fix this.
Incidentally, this change fixes another bug in the command line
option parser, which has allowed the -L option used together
with the --follow option. Because the latter requires exactly
one path given, but the former takes no pathspec, they become
mutually incompatible automatically. Because the -L option
follows renames on its own, there is no reason to give --follow
at the same time.
The new tests say they may fail with "-L and --follow being
incompatible" instead of "-L and pathspec being incompatible".
Currently the expected failure can come only from the latter, but
this is to futureproof them, in case we decide to add code to
explicititly die on -L and --follow used together.
Heled-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the testsuite to run where it treats requests for "recursive" or
the default merge algorithm via consulting the environment variable
GIT_TEST_MERGE_ALGORITHM which is expected to either be "recursive" (the
old traditional algorithm) or "ort" (the new algorithm).
Also, allow folks to pick the new algorithm via config setting. It
turns out builtin/merge.c already had a way to allow users to specify a
different default merge algorithm: pull.twohead. Rather odd
configuration name (especially to be in the 'pull' namespace rather than
'merge') but it's there. Add that same configuration to rebase,
cherry-pick, and revert.
This required updating the various callsites that called merge_trees()
or merge_recursive() to conditionally call the new API, so this serves
as another demonstration of what the new API looks and feels like.
There are almost certainly some callsites that have not yet been
modified to work with the new merge algorithm, but this represents the
ones that I have been testing with thus far.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff" family of commands learned the "-I<regex>" option to
ignore hunks whose changed lines all match the given pattern.
* mk/diff-ignore-regex:
diff: add -I<regex> that ignores matching changes
merge-base, xdiff: zero out xpparam_t structures
"git credential' didn't honor the core.askPass configuration
variable (among other things), which has been corrected.
* tk/credential-config:
credential: load default config
Document that the meaning of a Signed-off-by trailer can vary from
project to project in the end-user documentation, and clarify what
it means to this project.
* bk/sob-dco:
Documentation: stylistically normalize references to Signed-off-by:
SubmittingPatches: clarify DCO is our --signoff rule
Documentation: clarify and expand description of --signoff
doc: preparatory clean-up of description on the sign-off option
Test-coverage enhancement of running commit-graph task "git
maintenance" as needed led to discovery and fix of a bug.
* ds/maintenance-commit-graph-auto-fix:
maintenance: core.commitGraph=false prevents writes
maintenance: test commit-graph auto condition
"git fast-import" wasted a lot of memory when many marks were in use.
* jk/fast-import-marks-alloc-fix:
fast-import: fix over-allocation of marks storage
hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed
for a while, but aren't necessarily the clearest names, especially with
hashmap_partial_clear() being added to the mix and lazy-initialization
now being supported. Peff suggested we adopt the following names[1]:
- hashmap_clear() - remove all entries and de-allocate any
hashmap-specific data, but be ready for reuse
- hashmap_clear_and_free() - ditto, but free the entries themselves
- hashmap_partial_clear() - remove all entries but don't deallocate
table
- hashmap_partial_clear_and_free() - ditto, but free the entries
This patch provides the new names and converts all existing callers over
to the new naming scheme.
[1] https://lore.kernel.org/git/20201030125059.GA3277724@coredump.intra.peff.net/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The penultimate commit moved the initialization of 'sb.path' in
'builtin/blame.c::cmd_blame' before the call to
'blame.c::setup_blame_bloom_data'. Since 'cmd_blame' is the only caller
of 'setup_blame_bloom_data', it is now unnecessary for
'setup_blame_bloom_data' to receive 'path' as a separate argument, as
'sb.path' is already initialized.
Remove this argument from setup_blame_bloom_data's interface and use the
'path' field of the 'sb' 'struct blame_scoreboard' instead.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit moved the initialization of 'sb.path' in
'builtin/blame.c::cmd_blame' before the call to
'blame.c::setup_scoreboard'. Since 'cmd_blame' is the only caller of
'setup_scoreboard', it is now unnecessary for 'setup_scoreboard' to
receive 'path' as a separate argument, as 'sb.path' is already
initialized.
Remove this argument from setup_scoreboard's interface and use the
'path' field of the 'sb' 'struct blame_scoreboard' instead.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In blame.c::cmd_blame, we send the 'path' field of the 'sb' 'struct
blame_scoreboard' as the 'path' argument to
'line-range.c::parse_range_arg', but 'sb.path' is not set yet; it's set
to the local variable 'path' a few lines later at line 1137.
This 'path' argument is only used in 'parse_range_arg' if we are blaming
a funcname, i.e. `git blame -L :<funcname> <path>`, and in that case it
is sent to 'parse_range_funcname', where it is used to determine if a
userdiff driver should be used for said <path> to match the given
funcname.
Since 'path' is yet unset, the userdiff driver is never used, so we fall
back to the default funcname regex, which is usually not appropriate for
paths that are set to use a specific userdiff driver, and thus either we
match some unrelated lines, or we die with
fatal: -L parameter '<funcname>' starting at line 1: no match
This has been the case ever since `git blame` learned to blame a
funcname in 13b8f68c1f (log -L: :pattern:file syntax to find by
funcname, 2013-03-28).
Enable funcname blaming for paths using specific userdiff drivers by
initializing 'sb.path' earlier in 'cmd_blame', when some of its other
fields are initialized, so that it is set when passed to
'parse_range_arg'.
Add a regression test in 'annotate-tests.sh', which is sourced in
t8001-annotate.sh and t8002-blame.sh, leveraging an existing file used
to test the userdiff patterns in t4018-diff-funcname.
Also, use 'sb.path' instead of 'path' when constructing the error
message at line 1114, for consistency.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git blame -h' and 'git log -h' both show '-L <n,m>' and describe this
option as "Process only line range n,m, counting from 1". No hint is
given that a function name regex can also be used.
Use <range> instead, and expand the description of the option to mention
both modes. Remove "counting from 1" as it's uneeded; it's uncommon to
refer to the first line of a file as "line 0".
Also, for 'git log', improve the wording to better reflect the long help.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calling rev-parse to check if the drop subcommand removed the last stash
and treating its failure as confirmation is fragile, as the command can
fail for other reasons, e.g. because the system is out of memory.
Directly check if the reflog is empty instead, which is more robust.
Reported-by: Marek Mrva <mrva@eof-studios.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow callers to specify the repository to use. Rename the function to
repo_clear_commit_marks to document its new scope. No functional change
intended.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 2.29, "--committer-date-is-author-date" option of "rebase" and
"am" subcommands lost the e-mail address by mistake, which has been
corrected.
* jk/committer-date-is-author-date-fix:
rebase: fix broken email with --committer-date-is-author-date
am: fix broken email with --committer-date-is-author-date
t3436: check --committer-date-is-author-date result more carefully
"git checkout" learned to use checkout.guess configuration variable
and enable/disable its "--[no-]guess" option accordingly.
* dl/checkout-guess:
checkout: learn to respect checkout.guess
Documentation/config/checkout: replace sq with backticks
"git checkout -p A...B [-- <path>]" did not work, even though the
same command without "-p" correctly used the merge-base between
commits A and B.
* dl/checkout-p-merge-base:
t2016: add a NEEDSWORK about the PERL prerequisite
add-patch: add NEEDSWORK about comparing commits
Doc: document "A...B" form for <tree-ish> in checkout and switch
builtin/checkout: fix `git checkout -p HEAD...` bug
"git clone" learned clone.defaultremotename configuration variable
to customize what nickname to use to call the remote the repository
was cloned from.
* sb/clone-origin:
clone: allow configurable default for `-o`/`--origin`
clone: read new remote name from remote_name instead of option_origin
clone: validate --origin option before use
refs: consolidate remote name validation
remote: add tests for add and rename with invalid names
clone: use more conventional config/option layering
clone: add tests for --template and some disallowed option pairs
"git push --force-with-lease[=<ref>]" can easily be misused to lose
commits unless the user takes good care of their own "git fetch".
A new option "--force-if-includes" attempts to ensure that what is
being force-pushed was created after examining the commit at the
tip of the remote ref that is about to be force-replaced.
* sk/force-if-includes:
t, doc: update tests, reference for "--force-if-includes"
push: parse and set flag for "--force-if-includes"
push: add reflog check for "--force-if-includes"
"git worktree list" now shows if each worktree is locked. This
possibly may open us to show other kinds of states in the future.
* rs/worktree-list-show-locked:
worktree: teach `list` to annotate locked worktree
If we encounter an error while checking out an explicit path, we print a
message to stderr but do not actually exit with a non-zero code. While
this is a plumbing command and the behavior goes all the way back to
33db5f4d90 (Add a "checkout-cache" command which does what the name
suggests., 2005-04-09), this is almost certainly an oversight:
- we _do_ return an exit code from checkout_file(); the caller just
never reads it
- errors while checking out all paths (with "-a") do result in a
non-zero exit code.
- it would be quite unusual not to use the exit code for an error,
as otherwise the caller has no idea the command failed except by
scraping stderr
To keep our tests simple and portable, we can use the most obvious
error: asking to checkout a path which is not in the index at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If checkout-index is given --stage=all for a specific path, it will try
to write stages 1-3 (if present) for that path to temporary files.
However, if the file is present only at stage 0, it writes nothing but
gives a confusing message:
$ git checkout-index --stage=all -- Makefile
git checkout-index: Makefile does not exist at stage 4
This is nonsense. There is no stage 4 (it's just an internal enum value
we use for "all"), and the documentation clearly states:
Paths which only have a stage 0 entry will always be omitted from the
output.
Here it's talking about the list of tempfiles written to stdout, but it
seems clear that this case was not meant to be an error. We even have a
test which covers it, but it only checks that the command reports an
exit code of 0, not its stderr. And it reports 0 only because of another
bug which fails to propagate errors (which will be fixed in a subsequent
patch).
So let's make the test more thorough. We'll also cover the case that we
found _no_ entry, not even a stage zero, which should still be an error.
However, because of the other bug, we'll have to mark this as expecting
failure for the moment.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the exit code for the likes of "git remote add/rename" to exit
with 2 if the remote in question doesn't exist, and 3 if it
does. Before we'd just die() and exit with the general 128 exit code.
This changes the output message from e.g.:
fatal: remote origin already exists.
To:
error: remote origin already exists.
Which I believe is a feature, since we generally use "fatal" for the
generic errors, and "error" for the more specific ones with a custom
exit code, but this part of the change may break code that already
relies on stderr parsing (not that we ever supported that...).
The motivation for this is a discussion around some code in GitLab's
gitaly which wanted to check this, and had to parse stderr to do so:
https://gitlab.com/gitlab-org/gitaly/-/merge_requests/2695
It's worth noting as an aside that a method of checking this that
doesn't rely on that is to check with "git config" whether the value
in question does or doesn't exist. That introduces a TOCTOU race
condition, but on the other hand this code (e.g. "git remote add")
already has a TOCTOU race.
We go through the config.lock for the actual setting of the config,
but the pseudocode logic is:
read_config();
check_config_and_arg_sanity();
save_config();
So e.g. if a sleep() is added right after the remote_is_configured()
check in add() we'll clobber remote.NAME.url, and add another (usually
duplicate) remote.NAME.fetch entry (and other values, depending on
invocation).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 2.29, "--committer-date-is-author-date" option of "rebase" and
"am" subcommands lost the e-mail address by mistake, which has been
corrected.
* jk/committer-date-is-author-date-fix:
rebase: fix broken email with --committer-date-is-author-date
am: fix broken email with --committer-date-is-author-date
t3436: check --committer-date-is-author-date result more carefully
For the --committer-date-is-author-date option of git-am and git-rebase,
we format the committer ident, then re-parse it to find the name and
email, and then feed those back to fmt_ident().
We can simplify this by handling it all at the time of the fmt_ident()
call. We pass in the appropriate getenv() results, and if they're not
present, then our WANT_COMMITTER_IDENT flag tells fmt_ident() to fill in
the appropriate value from the config. Which is exactly what
git_committer_ident() was doing under the hood.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e8cbe2118a (am: stop exporting GIT_COMMITTER_DATE, 2020-08-17)
rewrote the code for setting the committer date to use fmt_ident(),
rather than setting an environment variable and letting commit_tree()
handle it. But it introduced two bugs:
- we use the author email string instead of the committer email
- when parsing the committer ident, we used the wrong variable to
compute the length of the email, resulting in it always being a
zero-length string
This commit fixes both, which causes our test of this option via the
rebase "apply" backend to now succeed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
