On Windows, we emulate open(3p) via `mingw_open()`. This function
implements handling of some platform-specific quirks that are required
to make it behave as closely as possible like open(3p) would, but for
most cases we just call the Windows-specific `_wopen()` function.
This function has a major downside though: it does not allow us to
specify the sharing mode. While there is `_wsopen()` that allows us to
pass sharing flags, those sharing flags are not the same `FILE_SHARE_*`
flags as `CreateFileW()` accepts. Instead, `_wsopen()` only allows
concurrent read- and write-access, but does not allow for concurrent
deletions. Unfortunately though, we have to allow concurrent deletions
if we want to have POSIX-style atomic renames on top of an existing file
that has open file handles.
Implement a new function that emulates open(3p) for existing files via
`CreateFileW()` such that we can set the required sharing flags.
While we have the same issue when calling open(3p) with `O_CREAT`,
implementing that mode would be more complex due to the required
permission handling. Furthermore, atomic updates via renames typically
write to exclusive lockfile and then perform the rename, and thus we
don't have to handle the case where the locked path has been created
with `O_CREATE`. So while it would be nice to have proper POSIX
semantics in all paths, we instead aim for a minimum viable fix here.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Unless told otherwise, Windows will keep other processes from reading,
writing and deleting files when one has an open handle that was created
via `CreateFileW()`. This behaviour can be altered via `FILE_SHARE_*`
flags:
- `FILE_SHARE_READ` allows a concurrent process to open the file for
reading.
- `FILE_SHARE_WRITE` allows a concurrent process to open the file for
writing.
- `FILE_SHARE_DELETE` allows a concurrent process to delete the file
or to replace it via an atomic rename.
This sharing mechanism is quite important in the context of Git, as we
assume POSIX semantics all over the place. But there are two callsites
where we don't pass all three of these flags:
- We don't set `FILE_SHARE_DELETE` when creating a file for appending
via `mingw_open_append()`. This makes it impossible to delete the
file from another process or to replace it via an atomic rename. The
function was introduced via d641097589 (mingw: enable atomic
O_APPEND, 2018-08-13) and has been using `FILE_SHARE_READ |
FILE_SHARE_WRITE` since the inception. There aren't any indicators
that the omission of `FILE_SHARE_DELETE` was intentional.
- We don't set any sharing flags in `mingw_utime()`, which changes the
access and modification of a file. This makes it impossible to
perform any kind of operation on this file at all from another
process. While we only open the file for a short amount of time to
update its timestamps, this still opens us up for a race condition
with another process.
`mingw_utime()` was originally implemented via `_wopen()`, which
doesn't give you full control over the sharing mode. Instead, it
calls `_wsopen()` with `_SH_DENYNO`, which ultimately translates to
`FILE_SHARE_READ | FILE_SHARE_WRITE`. It was then refactored via
090a3085bc (t/helper/test-chmtime: update mingw to support chmtime
on directories, 2022-03-02) to use `CreateFileW()`, but we stopped
setting any sharing flags at all, which seems like an unintentional
side effect. By restoring `FILE_SHARE_READ | FILE_SHARE_WRITE` we
thus fix this and get back the old behaviour of `_wopen()`.
The fact that we didn't set the equivalent of `FILE_SHARE_DELETE`
can be explained, as well: neither `_wopen()` nor `_wsopen()` allow
you to do so. So overall, it doesn't seem intentional that we didn't
allow deletions here, either.
Adapt both of these callsites to pass all three sharing flags.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Code clean-up.
* ps/environ-wo-the-repository: (21 commits)
environment: stop storing "core.notesRef" globally
environment: stop storing "core.warnAmbiguousRefs" globally
environment: stop storing "core.preferSymlinkRefs" globally
environment: stop storing "core.logAllRefUpdates" globally
refs: stop modifying global `log_all_ref_updates` variable
branch: stop modifying `log_all_ref_updates` variable
repo-settings: track defaults close to `struct repo_settings`
repo-settings: split out declarations into a standalone header
environment: guard state depending on a repository
environment: reorder header to split out `the_repository`-free section
environment: move `set_git_dir()` and related into setup layer
environment: make `get_git_namespace()` self-contained
environment: move object database functions into object layer
config: make dependency on repo in `read_early_config()` explicit
config: document `read_early_config()` and `read_very_early_config()`
environment: make `get_git_work_tree()` accept a repository
environment: make `get_graft_file()` accept a repository
environment: make `get_index_file()` accept a repository
environment: make `get_object_directory()` accept a repository
environment: make `get_git_common_dir()` accept a repository
...
In "environment.h" we have quite a lot of functions and variables that
either explicitly or implicitly depend on `the_repository`.
The implicit set of stateful declarations includes for example variables
which get populated when parsing a repository's Git configuration. This
set of variables is broken by design, as their state often depends on
the last repository config that has been parsed. So they may or may not
represent the state of `the_repository`.
Fixing that is quite a big undertaking, and later patches in this series
will demonstrate a solution for a first small set of those variables. So
for now, let's guard these with `USE_THE_REPOSITORY_VARIABLE` so that
callers are aware of the implicit dependency.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The compat/ directory contains many stub functions, wrappers, and so on
that have to conform to a specific interface, but don't necessarily need
to use all of their parameters. Let's mark them to avoid complaints from
-Wunused-parameter.
This was done mostly via guess-and-check with the Windows build in
GitHub CI. I also confirmed that the win+VS build is similarly happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whether the full path to the MSYS2 Bash is specified using backslashes
or forward slashes, in either case the command-line arguments need to be
quoted in the MSYS2-specific manner instead of using regular Win32
command-line quoting rules.
In preparation for `prepare_shell_cmd()` to use the full path to
`sh.exe` (with forward slashes for consistency), let's teach the
`is_msys2_sh()` function about this; Otherwise 5580.4 'clone with
backslashed path' would fail once `prepare_shell_cmd()` uses the full
path instead of merely `sh`.
This patch relies on the just-introduced fix where `fspathcmp()` handles
backslashes and forward slashes as equivalent on Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An unused extern declaration for mingw has been removed to prevent
it from causing build failure.
* js/mingw-remove-unused-extern-decl:
mingw: drop bogus (and unneeded) declaration of `_pgmptr`
In 08809c09aa (mingw: add a helper function to attach GDB to the
current process, 2020-02-13), I added a declaration that was not needed.
Back then, that did not matter, but now that the declaration of that
symbol was changed in mingw-w64's headers, it causes the following
compile error:
CC compat/mingw.o
compat/mingw.c: In function 'open_in_gdb':
compat/mingw.c:35:9: error: function declaration isn't a prototype [-Werror=strict-prototypes]
35 | extern char *_pgmptr;
| ^~~~~~
In file included from C:/git-sdk-64/usr/src/git/build-installers/mingw64/lib/gcc/x86_64-w64-mingw32/14.1.0/include/mm_malloc.h:27,
from C:/git-sdk-64/usr/src/git/build-installers/mingw64/lib/gcc/x86_64-w64-mingw32/14.1.0/include/xmmintrin.h:34,
from C:/git-sdk-64/usr/src/git/build-installers/mingw64/lib/gcc/x86_64-w64-mingw32/14.1.0/include/immintrin.h:31,
from C:/git-sdk-64/usr/src/git/build-installers/mingw64/lib/gcc/x86_64-w64-mingw32/14.1.0/include/x86intrin.h:32,
from C:/git-sdk-64/usr/src/git/build-installers/mingw64/include/winnt.h:1658,
from C:/git-sdk-64/usr/src/git/build-installers/mingw64/include/minwindef.h:163,
from C:/git-sdk-64/usr/src/git/build-installers/mingw64/include/windef.h:9,
from C:/git-sdk-64/usr/src/git/build-installers/mingw64/include/windows.h:69,
from C:/git-sdk-64/usr/src/git/build-installers/mingw64/include/winsock2.h:23,
from compat/../git-compat-util.h:215,
from compat/mingw.c:1:
compat/mingw.c:35:22: error: '__p__pgmptr' redeclared without dllimport attribute: previous dllimport ignored [-Werror=attributes]
35 | extern char *_pgmptr;
| ^~~~~~~
Let's just drop the declaration and get rid of this compile error.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust various places in our Win32 compatibility layer where we are not
assigning string constants to `const char *` variables.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After 2406bf5f (Win32: detect unix socket support at runtime,
2024-04-03), it fails with:
compat/mingw.c:4160:5: error: no previous prototype for function 'mingw_have_unix_sockets' [-Werror,-Wmissing-prototypes]
4160 | int mingw_have_unix_sockets(void)
| ^
because the prototype is behind `ifndef NO_UNIX_SOCKETS`.
Signed-off-by: Mike Hommey <mh@glandium.org>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows 10 build 17063 introduced support for unix sockets to Windows.
bb390b1 (git-compat-util: include declaration for unix sockets in
windows, 2021-09-14) introduced a way to build git with unix socket
support on Windows, but you still had to decide at build time which
Windows version the compiled executable was supposed to run on.
We can detect at runtime wether the operating system supports unix
sockets and act accordingly for all supported Windows versions.
This fixes https://github.com/git-for-windows/git/issues/3892
Signed-off-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c6d3cce6f3 (pipe_command(): handle ENOSPC when writing to a
pipe, 2022-08-17), one `write()` call that results in an `errno` value
`ENOSPC` (which typically indicates out of disk space, which makes
little sense in the context of a pipe) is treated the same as `EAGAIN`.
However, contrary to expectations, as diagnosed in
https://github.com/python/cpython/issues/101881#issuecomment-1428667015,
when writing to a non-blocking pipe on Windows, an `errno` value of
`ENOSPC` means something else: the write _fails_. Completely. Because
more data was provided than the internal pipe buffer can handle.
Somewhat surprising, considering that `write()` is allowed to write less
than the specified amount, e.g. by writing only as much as fits in that
buffer. But it doesn't, it writes no byte at all in that instance.
Let's handle this by manually detecting when an `ENOSPC` indicates that
a pipe's buffer is smaller than what needs to be written, and re-try
using the pipe's buffer size as `size` parameter.
It would be plausible to try writing the entire buffer in a loop,
feeding pipe buffer-sized chunks, but experiments show that trying to
write more than one buffer-sized chunk right after that will immediately
fail because the buffer is unlikely to be drained as fast as `write()`
could write again. And the whole point of a non-blocking pipe is to be
non-blocking.
Which means that the logic that determines the pipe's buffer size
unfortunately has to be run potentially many times when writing large
amounts of data to a non-blocking pipe, as there is no elegant way to
cache that information between `write()` calls. It's the best we can do,
though, so it has to be good enough.
This fix is required to let t3701.60 (handle very large filtered diff)
pass with the MSYS2 runtime provided by the MSYS2 project: Without this
patch, the failed write would result in an infinite loop. This patch is
not required with Git for Windows' variant of the MSYS2 runtime only
because Git for Windows added an ugly work-around specifically to avoid
a hang in that test case.
The diff is slightly chatty because it extends an already-existing
conditional that special-cases a _different_ `errno` value for pipes,
and because this patch needs to account for the fact that
`_get_osfhandle()` potentially overwrites `errno`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to (rather cryptic) Security Identifiers, show username
and domain in the error message when we barf on mismatch between
the Git directory and the current user on Windows.
* sk/mingw-owner-check-error-message-improvement:
mingw: give more details about unsafe directory's ownership
Add domain/username in error message, if owner sid of repository and
user sid are not equal on windows systems.
Old error message:
'''
fatal: detected dubious ownership in repository at 'C:/Users/test/source/repos/git'
'C:/Users/test/source/repos/git' is owned by:
'S-1-5-21-571067702-4104414259-3379520149-500'
but the current user is:
'S-1-5-21-571067702-4104414259-3379520149-1001'
To add an exception for this directory, call:
git config --global --add safe.directory C:/Users/test/source/repos/git
'''
New error message:
'''
fatal: detected dubious ownership in repository at 'C:/Users/test/source/repos/git'
'C:/Users/test/source/repos/git' is owned by:
DESKTOP-L78JVA6/Administrator (S-1-5-21-571067702-4104414259-3379520149-500)
but the current user is:
DESKTOP-L78JVA6/test (S-1-5-21-571067702-4104414259-3379520149-1001)
To add an exception for this directory, call:
git config --global --add safe.directory C:/Users/test/source/repos/git
'''
Signed-off-by: Sören Krecker <soekkle@freenet.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the config parser sees an "implicit" bool like:
[core]
someVariable
it passes NULL to the config callback. Any callback code which expects a
string must check for NULL. This usually happens via helpers like
git_config_string(), etc, but some custom code forgets to do so and will
segfault.
These are all fairly vanilla cases where the solution is just the usual
pattern of:
if (!value)
return config_error_nonbool(var);
though note that in a few cases we have to split initializers like:
int some_var = initializer();
into:
int some_var;
if (!value)
return config_error_nonbool(var);
some_var = initializer();
There are still some broken instances after this patch, which I'll
address on their own in individual patches after this one.
Reported-by: Carlos Andrés Ramírez Cataño <antaigroupltda@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git bisect visualize" stopped running "gitk" on Git for Windows
when the command was reimplemented in C around Git 2.34 timeframe.
This has been corrected.
* ma/locate-in-path-for-windows:
docs: update when `git bisect visualize` uses `gitk`
compat/mingw: implement a native locate_in_PATH()
run-command: conditionally define locate_in_PATH()
since 5e1f28d (bisect--helper: reimplement `bisect_visualize()` shell
function in C, 2021-09-13) `git bisect visualize` uses exists_in_PATH()
to check wether it should call `gitk`, but exists_in_PATH() relies on
locate_in_PATH() which currently only understands POSIX-ish PATH variables
(a list of paths, separated by colons) on native Windows executables
we encounter Windows PATH variables (a list of paths that often contain
drive letters (and thus colons), separated by semicolons). Luckily we do
already have a function that can lookup executables on windows PATHs:
path_lookup(). Implement a small replacement for the existing
locate_in_PATH() based on path_lookup().
Reported-by: Louis Strous <Louis.Strous@intellimagic.com>
Signed-off-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce reliance on a global state in the config reading API.
* gc/config-context:
config: pass source to config_parser_event_fn_t
config: add kvi.path, use it to evaluate includes
config.c: remove config_reader from configsets
config: pass kvi to die_bad_number()
trace2: plumb config kvi
config.c: pass ctx with CLI config
config: pass ctx with config files
config.c: pass ctx in configsets
config: add ctx arg to config_fn_t
urlmatch.h: use config_fn_t type
config: inline git_color_default_config
Add a new "const struct config_context *ctx" arg to config_fn_t to hold
additional information about the config iteration operation.
config_context has a "struct key_value_info kvi" member that holds
metadata about the config source being read (e.g. what kind of config
source it is, the filename, etc). In this series, we're only interested
in .kvi, so we could have just used "struct key_value_info" as an arg,
but config_context makes it possible to add/adjust members in the future
without changing the config_fn_t signature. We could also consider other
ways of organizing the args (e.g. moving the config name and value into
config_context or key_value_info), but in my experiments, the
incremental benefit doesn't justify the added complexity (e.g. a
config_fn_t will sometimes invoke another config_fn_t but with a
different config value).
In subsequent commits, the .kvi member will replace the global "struct
config_reader" in config.c, making config iteration a global-free
operation. It requires much more work for the machinery to provide
meaningful values of .kvi, so for now, merely change the signature and
call sites, pass NULL as a placeholder value, and don't rely on the arg
in any meaningful way.
Most of the changes are performed by
contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every
config_fn_t:
- Modifies the signature to accept "const struct config_context *ctx"
- Passes "ctx" to any inner config_fn_t, if needed
- Adds UNUSED attributes to "ctx", if needed
Most config_fn_t instances are easily identified by seeing if they are
called by the various config functions. Most of the remaining ones are
manually named in the .cocci patch. Manual cleanups are still needed,
but the majority of it is trivial; it's either adjusting config_fn_t
that the .cocci patch didn't catch, or adding forward declarations of
"struct config_context ctx" to make the signatures make sense.
The non-trivial changes are in cases where we are invoking a config_fn_t
outside of config machinery, and we now need to decide what value of
"ctx" to pass. These cases are:
- trace2/tr2_cfg.c:tr2_cfg_set_fl()
This is indirectly called by git_config_set() so that the trace2
machinery can notice the new config values and update its settings
using the tr2 config parsing function, i.e. tr2_cfg_cb().
- builtin/checkout.c:checkout_main()
This calls git_xmerge_config() as a shorthand for parsing a CLI arg.
This might be worth refactoring away in the future, since
git_xmerge_config() can call git_default_config(), which can do much
more than just parsing.
Handle them by creating a KVI_INIT macro that initializes "struct
key_value_info" to a reasonable default, and use that to construct the
"ctx" arg.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of trace and trace2 functions, without
explicitly including trace.h or trace2.h. This made it more difficult
to find which files could remove a dependence on cache.h. Make C files
explicitly include trace.h or trace2.h if they are using them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is another step towards letting us remove the include of cache.h in
strbuf.c. It does mean that we also need to add includes of abspath.h
in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to replace includes of cache.h with includes of the much
smaller alloc.h in many places. It does mean that we also need to add
includes of alloc.h in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleaning.
* rs/dup-array:
use DUP_ARRAY
add DUP_ARRAY
do full type check in BARF_UNLESS_COPYABLE
factor out BARF_UNLESS_COPYABLE
mingw: make argv2 in try_shell_exec() non-const
Add a semantic patch for replace ALLOC_ARRAY+COPY_ARRAY with DUP_ARRAY
to reduce code duplication and apply its results.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare for a stricter type check in COPY_ARRAY by removing the const
qualifier of argv2, like we already do to placate Visual Studio. We
have to add it back using explicit casts when actually using the
variable, unfortunately, because GCC (rightly) refuses to add it
implicitly. Similar casts are already used in mingw_execv().
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a repository is on a FAT32 file system, the user sees a message
that the path ownership cannot be determined. Fix a typo in the
message.
Signed-off-by: Daniël Haazen <danielhaazen@hotmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use run_command() with a struct child_process variable and populate its
"args" member directly instead of building a string array and passing it
to run_command_v_opt(). This avoids the use of magic index numbers and
makes simplifies the possible addition of more arguments in the future.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Platform-specific code that determines if a directory is OK to use
as a repository has been taught to report more details, especially
on Windows.
source: <pull.1286.v2.git.1659965270.gitgitgadget@gmail.com>
* js/safe-directory-plus:
mingw: handle a file owned by the Administrators group correctly
mingw: be more informative when ownership check fails on FAT32
mingw: provide details about unsafe directories' ownership
setup: prepare for more detailed "dubious ownership" messages
setup: fix some formatting
Platform-specific code that determines if a directory is OK to use
as a repository has been taught to report more details, especially
on Windows.
* js/safe-directory-plus:
mingw: handle a file owned by the Administrators group correctly
mingw: be more informative when ownership check fails on FAT32
mingw: provide details about unsafe directories' ownership
setup: prepare for more detailed "dubious ownership" messages
setup: fix some formatting
When an Administrator creates a file or directory, the created
file/directory is owned not by the Administrator SID, but by the
_Administrators Group_ SID. The reason is that users with administrator
privileges usually run in unprivileged ("non-elevated") mode, and their
user SID does not change when running in elevated mode.
This is is relevant e.g. when running a GitHub workflow on a build
agent, which runs in elevated mode: cloning a Git repository in a script
step will cause the worktree to be owned by the Administrators Group
SID, for example.
Let's handle this case as following: if the current user is an
administrator, Git should consider a worktree owned by the
Administrators Group as if it were owned by said user.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The FAT file system has no concept of ACLs. Therefore, it cannot store
any ownership information anyway, and the `GetNamedSecurityInfoW()` call
pretends that everything is owned "by the world".
Let's special-case that scenario and tell the user what's going on.
This addresses https://github.com/git-for-windows/git/issues/3886
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When Git refuses to use an existing repository because it is owned by
someone else than the current user, it can be a bit tricky on Windows to
figure out what is going on.
Let's help with that by providing more detailed information.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When verifying the ownership of the Git directory, we sometimes would
like to say a bit more about it, e.g. when using a platform-dependent
code path (think: Windows has the permission model that is so different
from Unix'), but only when it is a appropriate to actually say
something.
To allow for that, collect that information and hand it back to the
caller (whose responsibility it is to show it or not).
Note: We do not actually fill in any platform-dependent information yet,
this commit just adds the infrastructure to be able to do so.
Based-on-an-idea-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mkstemp() emulation on Windows has been improved.
source: <7265e37f-fd29-3579-b840-19a1df52a59f@web.de>
* rs/mingw-tighten-mkstemp:
mingw: avoid mktemp() in mkstemp() implementation
Files' attributes can indicate more than just whether they are files or
directories. It was reported in Git for Windows that on certain network
shares, this led to a nasty problem trying to create tags:
$ git tag -a -m "automatic tag creation" test_dir/test_tag
fatal: cannot lock ref 'refs/tags/test_dir/test_tag': unable to resolve reference 'refs/tags/test_dir/test_tag': Not a directory
Note: This does not necessarily happen with all types of network shares.
One setup where it _did_ happen is a Windows Server 2019 VM, and as
hinted in
http://woshub.com/slow-network-shared-folder-refresh-windows-server/
in the indicated instance the following commands worked around the bug:
Set-SmbClientConfiguration -DirectoryCacheLifetime 0
Set-SmbClientConfiguration -FileInfoCacheLifetime 0
Set-SmbClientConfiguration -FileNotFoundCacheLifetime 0
This would impact performance negatively, though, as it essentially
turns off all caching, therefore we do not want to require users to do
that just to be able to use Git on Windows.
The underlying bug is in the code added in 4b0abd5c69 (mingw: let
lstat() fail with errno == ENOTDIR when appropriate, 2016-01-26) that
emulates the POSIX behavior where `lstat()` should return `ENOENT` if
the file or directory simply does not exist but could be created, and
`ENOTDIR` if there is no file or directory nor could there be because a
leading path already exists and is not a directory.
In that code, the return value of `GetFileAttributesW()` is interpreted
as an enum value, not as a bit field, so that a perfectly fine leading
directory can be misdetected as "not a directory".
As a consequence, the `read_refs_internal()` function would return
`ENOTDIR`, suggesting not only that the tag in the `git tag` invocation
above does not exist, but that it cannot even be created.
Let's fix the code so that it interprets the return value of the
`GetFileAttributesW()` call correctly.
This fixes https://github.com/git-for-windows/git/issues/3727
Reported-by: Pierre Garnier <pgarnier@mega.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation of mkstemp() for MinGW uses mktemp() and open()
without the flag O_EXCL, which is racy. It's not a security problem
for now because all of its callers only create files within the
repository (incl. worktrees). Replace it with a call to our more
secure internal function, git_mkstemp_mode(), to prevent possible
future issues.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Preliminary code refactoring around transport and bundle code.
* ds/bundle-uri:
bundle.h: make "fd" version of read_bundle_header() public
remote: allow relative_url() to return an absolute url
remote: move relative_url()
http: make http_get_file() external
fetch-pack: move --keep=* option filling to a function
fetch-pack: add a deref_without_lazy_fetch_extended()
dir API: add a generalized path_match_flags() function
connect.c: refactor sending of agent & object-format
Introduce and apply coccinelle rule to discourage an explicit
comparison between a pointer and NULL, and applies the clean-up to
the maintenance track.
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
Add a path_match_flags() function and have the two sets of
starts_with_dot_{,dot_}slash() functions added in
63e95beb08 (submodule: port resolve_relative_url from shell to C,
2016-04-15) and a2b26ffb1a (fsck: convert gitmodules url to URL
passed to curl, 2020-04-18) be thin wrappers for it.
As the latter of those notes the fsck version was copied from the
initial builtin/submodule--helper.c version.
Since the code added in a2b26ffb1a was doing really doing the same as
win32_is_dir_sep() added in 1cadad6f65 (git clone <url>
C:\cygwin\home\USER\repo' is working (again), 2018-12-15) let's move
the latter to git-compat-util.h is a is_xplatform_dir_sep(). We can
then call either it or the platform-specific is_dir_sep() from this
new function.
Let's likewise change code in various other places that was hardcoding
checks for "'/' || '\\'" with the new is_xplatform_dir_sep(). As can
be seen in those callers some of them still concern themselves with
':' (Mac OS classic?), but let's leave the question of whether that
should be consolidated for some other time.
As we expect to make wider use of the "native" case in the future,
define and use two starts_with_dot_{,dot_}slash_native() convenience
wrappers. This makes the diff in builtin/submodule--helper.c much
smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
