"interpret-trailers" has been taught to optionally update a file in
place, instead of always writing the result to the standard output.
* tk/interpret-trailers-in-place:
interpret-trailers: add option for in-place editing
trailer: allow to write to files other than stdout
"git format-patch" learned to notice format.outputDirectory
configuration variable. This allows "-o <dir>" option to be
omitted on the command line if you always use the same directory in
your workflow.
* ak/format-patch-odir-config:
format-patch: introduce format.outputDirectory configuration
"git pull --rebase" has been extended to allow invoking
"rebase -i".
* js/pull-rebase-i:
completion: add missing branch.*.rebase values
remote: handle the config setting branch.*.rebase=interactive
pull: allow interactive rebase with --rebase=interactive
"git grep" by default does not fall back to its "--no-index"
behaviour outside a directory under Git's control (otherwise the
user may by mistake end up running a huge recursive search); with a
new configuration (set in $HOME/.gitconfig--by definition this
cannot be set in the config file per project), this safety can be
disabled.
* tg/grep-no-index-fallback:
builtin/grep: add grep.fallbackToNoIndex config
t7810: correct --no-index test
Documentation for "git fetch --depth" has been updated for clarity.
* ss/clone-depth-single-doc:
docs: clarify that --depth for git-fetch works with newly initialized repos
docs: say "commits" in the --depth option wording for git-clone
docs: clarify that passing --depth to git-clone implies --single-branch
The ignore mechanism saw a few regressions around untracked file
listing and sparse checkout selection areas in 2.7.0; the change
that is responsible for the regression has been reverted.
* nd/exclusion-regression-fix:
Revert "dir.c: don't exclude whole dir prematurely if neg pattern may match"
The documentation has been updated to hint the connection between
the '--signoff' option and DCO.
* dw/signoff-doc:
Expand documentation describing --signoff
Drop a few old "todo" items by deciding that the change one of them
suggests is not such a good idea, and doing the change the other
one suggested to do.
* ss/user-manual:
user-manual: add addition gitweb information
user-manual: add section documenting shallow clones
glossary: define the term shallow clone
user-manual: remove temporary branch entry from todo list
Some "git notes" operations, e.g. "git log --notes=<note>", should
be able to read notes from any tree-ish that is shaped like a notes
tree, but the notes infrastructure required that the argument must
be a ref under refs/notes/. Loosen it to require a valid ref only
when the operation would update the notes (in which case we must
have a place to store the updated notes tree, iow, a ref).
* mh/notes-allow-reading-treeish:
notes: allow treeish expressions as notes ref
Add a command line option --in-place to support in-place editing akin to
sed -i. This allows to write commands like the following:
git interpret-trailers --trailer "X: Y" a.txt > b.txt && mv b.txt a.txt
in a more concise way:
git interpret-trailers --trailer "X: Y" --in-place a.txt
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of years ago, I found the need to collaborate on topic
branches that were rebased all the time, and I really needed to see
what I was rebasing when pulling, so I introduced an
interactively-rebasing pull.
The way builtin pull works, this change also supports the value
'interactive' for the 'branch.<name>.rebase' config variable, which
is a neat thing because users can now configure given branches for
interactively-rebasing pulls without having to type out the complete
`--rebase=interactive` option every time they pull.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can pass -o/--output-directory to the format-patch command to store
patches in some place other than the working directory. This patch
introduces format.outputDirectory configuration option for same
purpose.
The case of usage of this configuration option can be convenience
to not pass every time -o/--output-directory if an user has pattern
to store all patches in the /patches directory for example.
The format.outputDirectory has lower priority than command line
option, so if user will set format.outputDirectory and pass the
command line option, a result will be stored in a directory that
passed to command line option.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" can now be configured (or told from the command line)
how many threads to use when searching in the working tree files.
* vl/grep-configurable-threads:
grep: add --threads=<num> option and grep.threads configuration
grep: slight refactoring to the code that disables threading
grep: allow threading even on a single-core machine
"git blame" learned to produce the progress eye-candy when it takes
too much time before emitting the first line of the result.
* ea/blame-progress:
blame: add support for --[no-]progress option
Add a framework to spawn a group of processes in parallel, and use
it to run "git fetch --recurse-submodules" in parallel.
Rerolled and this seems to be a lot cleaner. The merge of the
earlier one to 'next' has been reverted.
* sb/submodule-parallel-fetch:
submodules: allow parallel fetching, add tests and documentation
fetch_populated_submodules: use new parallel job processing
run-command: add an asynchronous parallel child processor
sigchain: add command to pop all common signals
strbuf: add strbuf_read_once to read without blocking
xread: poll on non blocking fds
submodule.c: write "Fetching submodule <foo>" to stderr
"branch --delete" has "branch -d" but "push --delete" does not.
* ps/push-delete-option:
push: add '-d' as shorthand for '--delete'
push: add '--delete' flag to synopsis
init_notes() is the main point of entry to the notes API. It ensures
that the input can be used as ref, because it needs a ref to update to
store notes tree after modifying it.
There however are many use cases where notes tree is only read, e.g.
"git log --notes=...". Any notes-shaped treeish could be used for such
purpose, but it is not allowed due to existing restriction.
Allow treeish expressions to be used in the case the notes tree is going
to be used without write "permissions". Add a flag to distinguish
whether the notes tree is intended to be used read-only, or will be
updated.
With this change, operations that use notes read-only can be fed any
notes-shaped tree-ish can be used, e.g. git log --notes=notes@{1}.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently when git grep is used outside of a git repository without the
--no-index option git simply dies. For convenience, add a
grep.fallbackToNoIndex configuration variable. If set to true, git grep
behaves like git grep --no-index if it is run outside of a git
repository. It defaults to false, preserving the current behavior.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original wording sounded as if --depth could only be used to deepen or
shorten the history of existing repos. However, that is not the case. In a
workflow like
$ git init
$ git remote add origin https://github.com/git/git.git
$ git fetch --depth=1
The newly initialized repo is properly created as a shallow repo.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not wrong to talk about "revisions" here, but in this context
revisions are always commits, and that is how we already name it in the
git-fetch docs. So align the docs by always referring to "commits".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is confusing to document how --depth behaves as part of the
--single-branch docs. Better move that part to the --depth docs, saying
that it implies --single-branch by default.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modify various document (man page) files to explain
in more detail what --signoff means.
This was inspired by https://lwn.net/Articles/669976/ where
paulj noted, "adding [the] '-s' argument to [a] git commit
doesn't really mean you have even heard of the DCO...".
Extending git's documentation will make it easier to argue
that developers understood --signoff when they use it.
Signed-off-by: David A. Wheeler <dwheeler@dwheeler.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rework the section on gitweb to add information about the cgi script
and the instaweb command.
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several places in the documentation that
the term shallow clone is used. Defining the term
enables its use elsewhere with a known definition.
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the section on "How to check out a different version of a
project" the "new" branch is used as a temporary branch. A detached
HEAD was not used since it was a new feature introduced just a
couple weeks prior.
The section could be changed to use and explain a detached HEAD,
except that would increase the learning curve early in the manual.
Detached HEADs are discussed a couple sections later under
"Examining an old version without creating a new branch".
Let's declare that it is a bad idea to rewrite the example that
uses a temporary branch to do the sightseeing on a detached HEAD.
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"format-patch" has learned a new option to zero-out the commit
object name on the mbox "From " line.
* bc/format-patch-null-from-line:
format-patch: check that header line has expected format
format-patch: add an option to suppress commit hash
sha1_file.c: introduce a null_oid constant
Add new config to avoid typing "--recurse-submodules" on each push.
* mc/push-recurse-submodules-config:
push: follow the "last one wins" convention for --recurse-submodules
push: test that --recurse-submodules on command line overrides config
push: add recurseSubmodules config option
"git push" takes "--delete" but does not take a short form "-d",
unlike "git branch" which does take both. Bring consistency
between them.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" can now be configured (or told from the command line) how
many threads to use when searching in the working tree files.
Signed-off-by: Victor Leschuk <vleschuk@accesssoftek.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the command to show progress output when it takes long time to
produce the first line of output; this option cannot be used with
"--incremental" or "--porcelain" options.
git-annotate inherits the option as well.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Edmundo Carmona Antoranz <eantoranz@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Oftentimes, patches created by git format-patch will be stored in
version control or compared with diff. In these cases, two otherwise
identical patches can have different commit hashes, leading to diff
noise. Teach git format-patch a --zero-commit option that instead
produces an all-zero hash to avoid this diff noise.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git p4" used to import Perforce CLs that touch only paths outside
the client spec as empty commits. It has been corrected to ignore
them instead, with a new configuration git-p4.keepEmptyCommits as a
backward compatibility knob.
* ls/p4-keep-empty-commits:
git-p4: add option to keep empty commits
"git p4" used to import Perforce CLs that touch only paths outside
the client spec as empty commits. It has been corrected to ignore
them instead, with a new configuration git-p4.keepEmptyCommits as a
backward compatibility knob.
* ls/p4-keep-empty-commits:
git-p4: add option to keep empty commits
