Until now, `git config -h` would have printed help for the old-style
syntax. Now that all modes have proper subcommands though it is
preferable to instead display the subcommand help.
Drop the `NO_INTERNAL_HELP` flag to do so. While at it, drop the help
mismatch in t0450 and add the `--get-colorbool` option to the usage such
that git-config(1)'s synopsis and `git config -h` match.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "edit" subcommand to git-config(1). Please refer to
preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "remove-section" subcommand to git-config(1). Please
refer to preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "rename-section" subcommand to git-config(1). Please
refer to preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "unset" subcommand to git-config(1). Please refer to
preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "set" subcommand to git-config(1). Please refer to
preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "get" subcommand to git-config(1). Please refer to
preceding commits regarding the motivation behind this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While git-config(1) has several modes, those modes are not exposed with
subcommands but instead by specifying action flags like `--unset` or
`--list`. This user interface is not really in line with how our more
modern commands work, where it is a lot more customary to say e.g. `git
remote list`. Furthermore, to add to the confusion, git-config(1) also
allows the user to request modes implicitly by just specifying the
correct number of arguments. Thus, `git config foo.bar` will retrieve
the value of "foo.bar" while `git config foo.bar baz` will set it to
"baz".
Overall, this makes for a confusing interface that could really use a
makeover. It hurts discoverability of what you can do with git-config(1)
and is comparatively easy to get wrong. Converting the command to have
subcommands instead would go a long way to help address these issues.
One concern in this context is backwards compatibility. Luckily, we can
introduce subcommands without breaking backwards compatibility at all.
This is because all the implicit modes of git-config(1) require that the
first argument is a properly formatted config key. And as config keys
_must_ have a dot in their name, any value without a dot would have been
discarded by git-config(1) previous to this change. Thus, given that
none of the subcommands do have a dot, they are unambiguous.
Introduce the first such new subcommand, which is "git config list". To
retain backwards compatibility we only conditionally use subcommands and
will fall back to the old syntax in case no subcommand was detected.
This should help to transition to the new-style syntax until we
eventually deprecate and remove the old-style syntax.
Note that the way we handle this we're duplicating some functionality
across old and new syntax. While this isn't pretty, it helps us to
ensure that there really is no change in behaviour for the old syntax.
Amend tests such that we run them both with old and new style syntax.
As tests are now run twice, state from the first run may be still be
around in the second run and thus cause tests to fail. Add cleanup logic
as required to fix such tests.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pull out function to handle the `--null` option, which we are about to
reuse in subsequent commits.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's quite a bunch of options to git-config(1) that allow the user to
specify which config location to use when reading or writing config
options. The logic to handle this is thus by necessity also quite
involved.
Pull it out into a separate function so that we can reuse it in
subsequent commits which introduce proper subcommands.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-config(1) command has various different modes which are
accessible via e.g. `--get-urlmatch` or `--unset-all`. These modes are
declared with `OPT_BIT()`, which causes two minor issues:
- The respective modes also have a negated form `--no-get-urlmatch`,
which is unintended.
- We have to manually handle exclusiveness of the modes.
Switch these options to instead use `OPT_CMDMODE()`, which is made
exactly for this usecase. Remove the now-unneeded check that only a
single mode is given, which is now handled by the parse-options
interface.
While at it, format optional placeholders for arguments to conform to
our style guidelines by using `[<placeholder>]`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--fixed-value` option can be used to alter how the value-pattern
parameter is interpreted for the various actions of git-config(1). But
while it is an option, it is currently listed as part of the actions
group, which is wrong.
Move the option to the "Other" group, which hosts the various options
known to git-config(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move around the option array. This will help us with a follow-up commit
that introduces subcommands to git-config(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ownership of memory returned when preparing a comment string is
quite intricate: when the returned value is different than the passed
value, then the caller is responsible to free the memory. This is quite
subtle, and it's even easier to miss because the returned value is in
fact a `const char *`.
Adapt the function to always return either `NULL` or a newly allocated
string. The function is called at most once per git-config(1), so it's
not like this micro-optimization really matters. Thus, callers are now
always responsible for freeing the value.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extending the previous step, this allows the whitespace placed after
the value before the "# comment message" to be tweaked by tweaking
the preprocessing rule to:
* If the given comment string begins with one or more whitespace
characters followed by '#', it is passed intact.
* If the given comment string begins with '#', a Space is
prepended.
* Otherwise, " # " (Space, '#', Space) is prefixed.
* A string with LF in it cannot be used as a comment string.
Unlike the previous step, which unconditionally added a space after
the value before writing the "# comment string", because the above
preprocessing already gives a whitespace before the '#', the
resulting string is written immediately after copying the value.
And the sanity checking rule becomes
* comment string after the above massaging that comes into
git_config_set_multivar_in_file_gently() must
- begin with zero or more whitespace characters followed by '#'.
- not have a LF in it.
I personally think this is over-engineered, but since I thought
things through anyway, here it is in the patch form. The logic to
tweak end-user supplied comment string is encapsulated in a new
helper function, git_config_prepare_comment_string(), so if new
front-end callers would want to use the same massaging rules, it is
easily reused.
Unfortunately I do not think of a way to tweak the preprocessing
rules further to optionally allow having no blank after the value,
i.e. to produce
[section]
variable = value#comment
(which is a valid way to say section.variable=value, by the way)
without sacrificing the ergonomics for the more usual case, so this
time I really stop here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git adds comments itself (like "rebase -i" todo list and
"commit -e" log message editor), it always gives a comment
introducer "#" followed by a Space before the message, except for
the recently introduced "git config --comment", where the users are
forced to say " this is my comment" if they want to add their
comment in this usual format; otherwise their comment string will
end up without a space after the "#".
Make it more ergonomic, while keeping it possible to also use this
unusual style, by massaging the comment string at the UI layer with
a set of simple rules:
* If the given comment string begins with '#', it is passed intact.
* Otherwise, "# " is prefixed.
* A string with LF in it cannot be used as a comment string.
Right now there is only one "front-end" that accepts end-user
comment string and calls the underlying machinery to add or modify
configuration file with comments, but to make sure that the future
callers perform similar massaging as they see fit, add a sanity
check logic in git_config_set_multivar_in_file_gently(), which is
the single choke point in the codepaths that consumes the comment
string.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce the ability to append comments to modifications
made using git-config. Example usage:
git config --comment "changed via script" \
--add safe.directory /home/alice/repo.git
based on the proposed patch, the output produced is:
[safe]
directory = /home/alice/repo.git #changed via script
Users need to be able to distinguish between config entries made
using automation and entries made by a human. Automation can add
comments containing a URL pointing to explanations for the change
made, avoiding questions from users as to why their config file
was changed by a third party.
The implementation ensures that a # character is unconditionally
prepended to the provided comment string, and that the comment
text is appended as a suffix to the changed key-value-pair in the
same line of text. Multi-line comments (i.e. comments containing
linefeed) are rejected as errors, causing Git to exit without
making changes.
Comments are aimed at humans who inspect or change their Git
config using a pager or editor. Comments are not meant to be
read or displayed by git-config at a later time.
Signed-off-by: Ralph Seichter <github@seichter.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c15129b699 (config: factor out global config file retrieval, 2024-01-18)
was a refactor that moved some of the code in this function to
`config.c`. However, in the process I managed to drop this code comment
which explains `$HOME not set`.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out code that retrieves the global config file so that we can use
it in `gc.c` as well.
Use the old name from the previous commit since this function acts
functionally the same as `git_system_config` but for “global”.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename this function to a more descriptive name since we want to use the
existing name for a new function.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove unneeded newlines according to `clang-format`.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further shuffling of declarations across header files to streamline
file dependencies.
* cw/compat-util-header-cleanup:
git-compat-util: move alloc macros to git-compat-util.h
treewide: remove unnecessary includes for wrapper.h
kwset: move translation table from ctype
sane-ctype.h: create header for sane-ctype macros
git-compat-util: move wrapper.c funcs to its header
git-compat-util: move strbuf.c funcs to its header
Reduce reliance on a global state in the config reading API.
* gc/config-context:
config: pass source to config_parser_event_fn_t
config: add kvi.path, use it to evaluate includes
config.c: remove config_reader from configsets
config: pass kvi to die_bad_number()
trace2: plumb config kvi
config.c: pass ctx with CLI config
config: pass ctx with config files
config.c: pass ctx in configsets
config: add ctx arg to config_fn_t
urlmatch.h: use config_fn_t type
config: inline git_color_default_config
alloc_nr, ALLOC_GROW, and ALLOC_GROW_BY are commonly used macros for
dynamic array allocation. Moving these macros to git-compat-util.h with
the other alloc macros focuses alloc.[ch] to allocation for Git objects
and additionally allows us to remove inclusions to alloc.h from files
that solely used the above macros.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plumb "struct key_value_info" through all code paths that end in
die_bad_number(), which lets us remove the helper functions that read
analogous values from "struct config_reader". As a result, nothing reads
config_reader.config_kvi any more, so remove that too.
In config.c, this requires changing the signature of
git_configset_get_value() to 'return' "kvi" in an out parameter so that
git_configset_get_<type>() can pass it to git_config_<type>(). Only
numeric types will use "kvi", so for non-numeric types (e.g.
git_configset_get_string()), pass NULL to indicate that the out
parameter isn't needed.
Outside of config.c, config callbacks now need to pass "ctx->kvi" to any
of the git_config_<type>() functions that parse a config string into a
number type. Included is a .cocci patch to make that refactor.
The only exceptional case is builtin/config.c, where git_config_<type>()
is called outside of a config callback (namely, on user-provided input),
so config source information has never been available. In this case,
die_bad_number() defaults to a generic, but perfectly descriptive
message. Let's provide a safe, non-NULL for "kvi" anyway, but make sure
not to change the message.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass config_context when parsing CLI config. To provide the .kvi member,
refactor out kvi_from_param() from the logic that caches CLI config in
configsets. Now that config_context and config_context.kvi is always
present when config machinery calls config callbacks, plumb "kvi" so
that we can remove all calls of current_config_scope() except for
trace2/*.c (which will be handled in a later commit), and remove all
other current_config_*() (the functions themselves and their calls).
Note that this results in .kvi containing a different, more complete
set of information than the mocked up "struct config_source" in
git_config_from_parameters().
Plumbing "kvi" reveals a few places where we've been doing the wrong
thing:
* git_config_parse_parameter() hasn't been setting config source
information, so plumb "kvi" there too.
* Several sites in builtin/config.c have been calling current_config_*()
functions outside of config callbacks (indirectly, via the
format_config() helper), which means they're reading state that isn't
set correctly:
* "git config --get-urlmatch --show-scope" iterates config to collect
values, but then attempts to display the scope after config
iteration, causing the "unknown" scope to be shown instead of the
config file's scope. It's clear that this wasn't intended: we knew
that "--get-urlmatch" couldn't show config source metadata, which is
why "--show-origin" was marked incompatible with "--get-urlmatch"
when it was introduced [1]. It was most likely a mistake that we
allowed "--show-scope" to sneak through.
Fix this by copying the "kvi" value in the collection phase so that
it can be read back later. This means that we can now support "git
config --get-urlmatch --show-origin", but that is left unchanged
for now.
* "git config --default" doesn't have config source metadata when
displaying the default value, so "--show-scope" also results in
"unknown", and "--show-origin" results in a BUG(). Fix this by
treating the default value as if it came from the command line (e.g.
like we do with "git -c" or "git config --file"), using
kvi_from_param().
[1] https://lore.kernel.org/git/20160205112001.GA13397@sigill.intra.peff.net/
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new "const struct config_context *ctx" arg to config_fn_t to hold
additional information about the config iteration operation.
config_context has a "struct key_value_info kvi" member that holds
metadata about the config source being read (e.g. what kind of config
source it is, the filename, etc). In this series, we're only interested
in .kvi, so we could have just used "struct key_value_info" as an arg,
but config_context makes it possible to add/adjust members in the future
without changing the config_fn_t signature. We could also consider other
ways of organizing the args (e.g. moving the config name and value into
config_context or key_value_info), but in my experiments, the
incremental benefit doesn't justify the added complexity (e.g. a
config_fn_t will sometimes invoke another config_fn_t but with a
different config value).
In subsequent commits, the .kvi member will replace the global "struct
config_reader" in config.c, making config iteration a global-free
operation. It requires much more work for the machinery to provide
meaningful values of .kvi, so for now, merely change the signature and
call sites, pass NULL as a placeholder value, and don't rely on the arg
in any meaningful way.
Most of the changes are performed by
contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every
config_fn_t:
- Modifies the signature to accept "const struct config_context *ctx"
- Passes "ctx" to any inner config_fn_t, if needed
- Adds UNUSED attributes to "ctx", if needed
Most config_fn_t instances are easily identified by seeing if they are
called by the various config functions. Most of the remaining ones are
manually named in the .cocci patch. Manual cleanups are still needed,
but the majority of it is trivial; it's either adjusting config_fn_t
that the .cocci patch didn't catch, or adding forward declarations of
"struct config_context ctx" to make the signatures make sense.
The non-trivial changes are in cases where we are invoking a config_fn_t
outside of config machinery, and we now need to decide what value of
"ctx" to pass. These cases are:
- trace2/tr2_cfg.c:tr2_cfg_set_fl()
This is indirectly called by git_config_set() so that the trace2
machinery can notice the new config values and update its settings
using the tr2 config parsing function, i.e. tr2_cfg_cb().
- builtin/checkout.c:checkout_main()
This calls git_xmerge_config() as a shorthand for parsing a CLI arg.
This might be worth refactoring away in the future, since
git_xmerge_config() can call git_default_config(), which can do much
more than just parsing.
Handle them by creating a KVI_INIT macro that initializes "struct
key_value_info" to a reasonable default, and use that to construct the
"ctx" arg.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also made it clear that a few .c files under builtin/ were
depending upon some headers but had forgotten to #include them. Add the
missing direct includes while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move 'repository_format_worktree_config' out of the global scope and into
the 'repository' struct. This change is similar to how
'repository_format_partial_clone' was moved in ebaf3bcf1a (repository: move
global r_f_p_c to repo struct, 2021-06-17), adding it to the 'repository'
struct and updating 'setup.c' & 'repository.c' functions to assign the value
appropriately.
The primary goal of this change is to be able to load the worktree config of
a submodule depending on whether that submodule - not its superproject - has
'extensions.worktreeConfig' enabled. To ensure 'do_git_config_sequence()'
has access to the newly repo-scoped configuration, add a 'struct repository'
argument to 'do_git_config_sequence()' and pass it the 'repo' value from
'config_with_options()'.
Finally, add/update tests in 't3007-ls-files-recurse-submodules.sh' to
verify 'extensions.worktreeConfig' is read an used independently by
superprojects and submodules.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a 'struct repository' argument to 'config_with_options()' and remove the
'repo' field from 'struct git_config_source'.
A 'struct repository' instance was originally added to the config source in
e3e8bf046e (submodule-config: pass repo upon blob config read, 2021-08-16)
to improve how submodule blob config content was accessed. At the time, this
was the only use for a 'repository' instance, so it was naturally added only
where it was needed: to 'struct git_config_source'. However, in upcoming
patches, 'config_with_options()' will need the repository instance to access
extension information (regardless of whether a 'config_source' exists). To
make the 'struct repository' instance more easily accessible, move it into
the function's arguments.
Update all callers of 'config_with_options()' to pass the appropriate 'repo'
value:
* in 'builtin/config.c', use 'the_repository'
* in 'submodule--config.c', use the 'repo' arg in 'config_from_gitmodules()'
* in 'read_[very_]early_config()' & 'read_protected_config()', set 'repo' to
NULL (repository instances aren't available there)
* in 'populate_remote_urls()', use the repo instance that has been added to
the 'struct config_include_data'
* in 'repo_read_config()', use the given 'repo' arg
Finally, note that this patch eliminates the fallback to 'the_repository'
that previously existed for the 'config_source' repo instance if it was
NULL. The fallback is no longer necessary, as the 'repo' is set explicitly
in all cases where it is needed.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
hash.h depends upon and includes repository.h, due to the definition and
use of the_hash_algo (defined as the_repository->hash_algo). However,
most headers trying to include hash.h are only interested in the layout
of the structs like object_id. Move the parts of hash.h that do not
depend upon repository.h into a new file hash-ll.h (the "low level"
parts of hash.h), and adjust other files to use this new header where
the convenience inline functions aren't needed.
This allows hash.h and object.h to be fairly small, minimal headers. It
also exposes a lot of hidden dependencies on both path.h (which was
brought in by repository.h) and repository.h (which was previously
implicitly brought in by object.h), so also adjust other files to be
more explicit about what they depend upon.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cache.h and strbuf.[ch] had editor-related functions. Move these into
editor.[ch].
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is another step towards letting us remove the include of cache.h in
strbuf.c. It does mean that we also need to add includes of abspath.h
in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These functions were all defined in a separate ident.c already, so
create ident.h and move the declarations into that file.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to replace includes of cache.h with includes of the much
smaller alloc.h in many places. It does mean that we also need to add
includes of alloc.h in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a lot of uses of UNLEAK() it would be quite tricky to release the
memory involved, or we're missing the relevant *_(release|clear)()
functions. But in these cases we have them already, and can just
invoke them on the variable(s) involved, instead of UNLEAK().
For "builtin/worktree.c" the UNLEAK() was also added in [1], but the
struct member it's unleaking was removed in [2]. The only non-"int"
member of that structure is "const char *keep_locked", which comes to
us via "argv" or a string literal[3].
We have good visibility via the compiler and
tooling (e.g. SANITIZE=address) on bad free()-ing, but none on
UNLEAK() we don't need anymore. So let's prefer releasing the memory
when it's easy.
For "bugreport", "worktree" and "config" we need to start using a "ret
= ..." return pattern. For "builtin/bugreport.c" these UNLEAK() were
added in [4], and for "builtin/config.c" in [1].
For "config" the code seen here was the only user of the "value"
variable. For "ACTION_{RENAME,REMOVE}_SECTION" we need to be sure to
return the right exit code in the cases where we were relying on
falling through to the top-level.
I think there's still a use-case for UNLEAK(), but hat it's changed
since then. Using it so that "we can see the real leaks" is
counter-productive in these cases.
It's more useful to have UNLEAK() be a marker of the remaining odd
cases where it's hard to free() the memory for whatever reason. With
this change less than 20 of them remain in-tree.
1. 0e5bba53af (add UNLEAK annotation for reducing leak false
positives, 2017-09-08)
2. d861d34a6e (worktree: remove extra members from struct add_opts,
2018-04-24)
3. 0db4961c49 (worktree: teach `add` to accept --reason <string> with
--lock, 2021-07-15)
4. 0e5bba53af and 00d8c31105 (commit: fix "author_ident" leak,
2022-05-12).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
As reported in [1] the "UNUSED(var)" macro introduced in
2174b8c75de (Merge branch 'jk/unused-annotation' into next,
2022-08-24) breaks coccinelle's parsing of our sources in files where
it occurs.
Let's instead partially go with the approach suggested in [2] of
making this not take an argument. As noted in [1] "coccinelle" will
ignore such tokens in argument lists that it doesn't know about, and
it's less of a surprise to syntax highlighters.
This undoes the "help us notice when a parameter marked as unused is
actually use" part of 9b24034754 (git-compat-util: add UNUSED macro,
2022-08-19), a subsequent commit will further tweak the macro to
implement a replacement for that functionality.
1. https://lore.kernel.org/git/220825.86ilmg4mil.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/220819.868rnk54ju.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callback passed to git_config() must conform to a particular
interface. But most callbacks don't actually look at the extra "void
*data" parameter. Let's mark the unused parameters to make
-Wunused-parameter happy.
Note there's one unusual case here in get_remote_default() where we
actually ignore the "value" parameter. That's because it's only checking
whether the option is found at all, and not parsing its value.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug a memory leak in credential_apply_config() by adding and using a
new urlmatch_config_release() function. This just does a
string_list_clear() on the "vars" member.
This finished up work on normalizing the init/free pattern in this
API, started in 73ee449bbf (urlmatch.[ch]: add and use
URLMATCH_CONFIG_INIT, 2021-10-01).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage help for --type option of `git config` is missing `type`
in the argument placeholder (`<>`). Add it.
Signed-off-by: Matheus Felipe <matheusfelipeog@protonmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the initialization pattern of "struct urlmatch_config" to use
an *_INIT macro and designated initializers. Right now there's no
other "struct" member of "struct urlmatch_config" which would require
its own *_INIT, but it's good practice not to assume that. Let's also
change this to a designated initializer while we're at it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's two callsites which assemble global config paths, once in the
config loading code and once in the git-config(1) builtin. We're about
to implement a way to override global config paths via an environment
variable which would require us to adjust both sites.
Unify both code paths into a single `git_global_config()` function which
returns both paths for `~/.gitconfig` and the XDG config file. This will
make the subsequent patch which introduces the new envvar easier to
implement.
No functional changes are expected from this patch.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git_etc_gitconfig()` function retrieves the system-level path of
the configuration file. We're about to introduce a way to override it
via an environment variable, at which point the name of this function
would start to become misleading.
Rename the function to `git_system_config()` as a preparatory step.
While at it, the function is also refactored to pass memory ownership to
the caller. This is done to better match semantics of
`git_global_config()`, which is going to be introduced in the next
commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config builtin does its own regex matching of values for the --get,
--get-all, and --get-regexp modes. Plumb the existing 'flags' parameter
to the get_value() method so we can initialize the value-pattern argument
as a fixed string instead of a regex pattern.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
