* bk/ancestry-path:
t6019: avoid refname collision on case-insensitive systems
revision: do not include sibling history in --ancestry-path output
revision: keep track of the end-user input from the command line
rev-list: Demonstrate breakage with --ancestry-path --all
display_error_msgs() prints all the errors to stderr already (if any),
followed by "Aborting" (if any) to stdout. Make the latter go to stderr
instead.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t9159 relies on the command-line syntax of svn >= 1.5. Given the
declining install base of older svn versions, it is not worth our time to
support older svn syntax.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The threading tests turn on format.thread, but never clean
up after themselves, meaning that later tests will also have
format.thread set.
This is more annoying than most leftover config, too,
because not only does it impact the results of other tests,
but it does so non-deterministically. Threading requires the
generation of message-ids, which incorporate the current
time, meaning a slow-running test script may generate
different results from run to run.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git branch" command, while not in listing mode, calls create_branch()
even when the target branch already exists, and it does so even when it is
not interested in updating the value of the branch (i.e. the name of the
commit object that sits at the tip of the existing branch). This happens
when the command is run with "--set-upstream" option.
The earlier safety-measure to prevent "git branch -f $branch $commit" from
updating the currently checked out branch did not take it into account,
and we no longer can update the tracking information of the current branch.
Minimally fix this regression by telling the validation code if it is
called to really update the value of a potentially existing branch, or if
the caller merely is interested in updating auxiliary aspects of a branch.
Reported-and-Tested-by: Jay Soffian
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1e5814f created t9160-git-svn-mergeinfo-push.sh on 11/9/7
40a1530 created t9160-git-svn-preserve-empty-dirs.sh on 11/7/20
The former test script is renumbered to t9161.
Signed-off-by: Frédéric Heitzmann <frederic.heitzmann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --no-index mode is intended to be used outside of a git repository, and
it does not make sense to apply the git standard exclusions outside a git
repositories.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The criss-cross tests kept failing for me because of collisions of 'a'
with 'A' etc. Prefix the lowercase refnames with an extra letter to
disambiguate.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch uses test_path_is_file and test_path_is_missing
instead of "test -f / ! test -f" checks. The former are more
verbose in case of failure and more precise (e.g., is_missing
will check that the entry is actually missing, not just not
a regular file).
As a bonus, this also fixes a few buggy tests that used
"test foo" instead of "test -f foo", and consequently always
reported success.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow git-svn to populate the svn:mergeinfo property automatically in
a narrow range of circumstances. Specifically, when dcommitting a
revision with multiple parents, all but (potentially) the first of
which have been committed to SVN in the same repository as the target
of the dcommit.
In this case, the merge info is the union of that given by each of the
parents, plus all changes introduced to the first parent by the other
parents.
In all other cases where a revision to be committed has multiple
parents, cause "git svn dcommit" to raise an error rather than
completing the commit and potentially losing history information in
the upstream SVN repository.
This behavior is disabled by default, and can be enabled by setting
the svn.pushmergeinfo config option.
[ew: minor style changes and manpage merge fix]
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Bryan Jacobs <bjacobs@woti.com>
Timezone designators in the following formats are all valid according to
ISO8601:2004, section 4.3.2:
[+-]hh, [+-]hhmm, [+-]hh:mm
but we have ignored the ones with colon so far.
Signed-off-by: Haitao Li <lihaitao@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit c9bfb953 (want_color: automatically fallback to color.ui,
2011-08-17) introduced a regression where format-patch produces colorized
patches when color.ui is set to "always".
In f3aafa4 (Disable color detection during format-patch, 2006-07-09),
git_format_config was taught to intercept diff.color to avoid passing it
down to git_log_config and later, git_diff_ui_config.
Teach git_format_config to intercept color.ui in the same way.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-config-param:
config: use strbuf_split_str instead of a temporary strbuf
strbuf: allow strbuf_split to work on non-strbufs
config: avoid segfault when parsing command-line config
config: die on error in command-line config
fix "git -c" parsing of values with equals signs
strbuf_split: add a max parameter
'git remote rename' will only update the remote's fetch refspec if it
looks like a default one. If the remote has no default fetch refspec,
as in
[remote "origin"]
url = git://git.kernel.org/pub/scm/git/git.git
fetch = +refs/heads/*:refs/remotes/upstream/*
we would not update the fetch refspec and even if there is a ref
called "refs/remotes/origin/master", we should not rename it, since it
was not created by fetching from the remote.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When renaming a remote called 'o' using 'git remote rename o foo', git
should also rename any remote-tracking branches for the remote. This
does happen, but any remote-tracking branches starting with
'refs/remotes/o', such as 'refs/remotes/origin/bar', will also be
renamed (to 'refs/remotes/foorigin/bar' in this case).
Fix it by simply matching one more character, up to the slash
following the remote name.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When renaming a remote whose name is contained in a configured fetch
refspec for that remote, we currently replace the first occurrence of
the remote name in the refspec. This is correct in most cases, but
breaks if the remote name occurs in the fetch refspec before the
expected place. For example, we currently change
[remote "remote"]
url = git://git.kernel.org/pub/scm/git/git.git
fetch = +refs/heads/*:refs/remotes/remote/*
into
[remote "origin"]
url = git://git.kernel.org/pub/scm/git/git.git
fetch = +refs/heads/*:refs/origins/remote/*
Reduce the risk of changing incorrect sections of the refspec by
matching the entire ":refs/remotes/<name>/" instead of just "<name>".
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"branch -v" without other options or parameters still works in the list
mode, but that is not because there is "-v" but because there is no
parameter nor option.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The %(body) placeholder returns the whole body of a tag or
commit, including the signature. However, callers may want
to get just the body without signature, or just the
signature.
Rather than change the meaning of %(body), which might break
some scripts, this patch introduces a new set of
placeholders which break down the %(contents) placeholder
into its constituent parts.
[jk: initial patch by mg, rebased on top of my refactoring
and with tests by me]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generally the format of a git tag or commit message is:
subject
body body body
body body body
However, we occasionally see multiline subjects like:
subject
with multiple
lines
body body body
body body body
The rest of git treats these multiline subjects as something
to be concatenated and shown as a single line (e.g., "git
log --pretty=format:%s" will do so since f53bd74). For
consistency, for-each-ref should do the same with its
"%(subject)".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current tests don't actually check parsing commit and
tag messages that have both a subject and a body (they just
have single-line messages).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other test scripts may want to look at or verify signed
tags, and the setup is non-trivial. Let's factor this out
into lib-gpg.sh for other tests to use.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for the new fetch.fsckobjects, and also tests for
receive.fsckobjects we have had for quite some time.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/maint-format-patch-empty-output:
Document negated forms of format-patch --to --cc --add-headers
t4014: "no-add-headers" is actually called "no-add-header"
t4014: invoke format-patch with --stdout where intended
t4014: check for empty files from git format-patch --stdout
* fk/use-kwset-pickaxe-grep-f:
obstack: Fix portability issues
Use kwset in grep
Use kwset in pickaxe
Adapt the kwset code to Git
Add string search routines from GNU grep
Add obstack.[ch] from EGLIBC 2.10
* en/merge-recursive-2: (57 commits)
merge-recursive: Don't re-sort a list whose order we depend upon
merge-recursive: Fix virtual merge base for rename/rename(1to2)/add-dest
t6036: criss-cross + rename/rename(1to2)/add-dest + simple modify
merge-recursive: Avoid unnecessary file rewrites
t6022: Additional tests checking for unnecessary updates of files
merge-recursive: Fix spurious 'refusing to lose untracked file...' messages
t6022: Add testcase for spurious "refusing to lose untracked" messages
t3030: fix accidental success in symlink rename
merge-recursive: Fix working copy handling for rename/rename/add/add
merge-recursive: add handling for rename/rename/add-dest/add-dest
merge-recursive: Have conflict_rename_delete reuse modify/delete code
merge-recursive: Make modify/delete handling code reusable
merge-recursive: Consider modifications in rename/rename(2to1) conflicts
merge-recursive: Create function for merging with branchname:file markers
merge-recursive: Record more data needed for merging with dual renames
merge-recursive: Defer rename/rename(2to1) handling until process_entry
merge-recursive: Small cleanups for conflict_rename_rename_1to2
merge-recursive: Fix rename/rename(1to2) resolution for virtual merge base
merge-recursive: Introduce a merge_file convenience function
merge-recursive: Fix modify/delete resolution in the recursive case
...
"svn dcommit --mergeinfo" replaces the svn:mergeinfo property in an
upstream SVN repository with the given text. The svn:mergeinfo
property may contain commits originating on multiple branches,
separated by newlines.
Cause space characters in the mergeinfo to be replaced by newlines,
allowing a user to create history representing multiple branches being
merged into one.
Update the corresponding documentation and add a test for the new
functionality.
Signed-off-by: Bryan Jacobs <bjacobs@woti.com>
Acked-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Adds a --preserve-empty-dirs flag to the clone operation that will detect
empty directories in the remote Subversion repository and create placeholder
files in the corresponding local Git directories. This allows "empty"
directories to exist in the history of a Git repository.
Also adds the --placeholder-file flag to control the name of any placeholder
files created. Default value is ".gitignore".
Signed-off-by: Ray Chen <rchen@cs.umd.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Some platforms (IRIX, Solaris) provide an ancient /bin/sh which chokes on
modern shell syntax like $(). SHELL_PATH is provided to allow the user to
specify a working sh, let's use it here.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since bc7a96a (mergetool--lib: Refactor tools into separate files,
2011-08-18) the mergetools and difftools related tests fail under
--valgrind because the mergetools/* scriptlets are not in the exec
path.
For now, symlink the mergetools subdir into the t/valgrind/bin
directory as a whole, since it does not contain anything of interest
to the valgrind wrappers.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
!"git ..." hopefully always succeeds because "git ..." is not the name
of any executable. However, that's not what was intended. Unquote
it, and while we're at it, also replace ! with test_must_fail since it
is a call to git.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c426003 (format-patch: add --no-cc, --no-to, and
--no-add-headers, 2010-03-07) the tests have checked for an option
called --no-add-headers introduced by letting the user negate
--add-header.
However, the parseopt machinery does not automatically pluralize
anything, so it is in fact called --no-add-header.
Since the option never worked, is not documented anywhere, and
implementing an actual --no-add-headers would lead to silly code
complications, we just adapt the test to the code.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test wrote something along the lines of 0001-foo.patch to output,
which of course never contained a signature. Luckily the tested
behaviour is actually present.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most kinds of failure in 'git format-patch --stdout >output' will
result in an empty 'output'. This slips past checks that only verify
absence of output, such as the '! grep ...' that are quite prevalent
in t4014.
Introduce a helper check_patch() that checks that at least From, Date
and Subject are present, thus making sure it looks vaguely like a
patch (or cover letter) email. Then insert calls to it in all tests
that do have positive checks for content.
This makes two of the tests fail. Mark them as such; they'll be
fixed in a moment.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On OS X, the grep pattern
"\"OP .*/objects/$x2/X38_X40 HTTP/[.0-9]*\" 20[0-9] "
is too long ($x38 and $x40 represent 38 and 40 copies of [0-9a-f]) for
grep to handle. In order to still be able to match this, use the sed
invocation to replace what we're looking for with a token.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow pattern arguments for the list mode just like for git tag -l.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, there is no way to invoke the list mode explicitly, without
giving -v to force verbose output.
Introduce a --list option which invokes the list mode. This will be
beneficial for invoking list mode with pattern matching, which otherwise
would be interpreted as branch creation.
Along with --list, test also combinations of existing options.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
