In preceding commits the codepaths around update_submodules() were
changed from using exit() or die() to ferrying up a
"must_die_on_failure" in the cases where we'd exit(), and in most
cases where we'd die().
We needed to do this this to ensure that we'd early exit or otherwise
abort the update_submodules() processing before it was completed.
Now that those preceding changes have shown that we've converted those
paths, we can remove the remaining "ret == 128" special-cases, leaving
the only such special-case in update_submodules(). I.e. we now know
after having gone through the various codepaths that we were only
returning 128 if we meant to early abort.
In update_submodules() we'll for now set any non-zero non-128 exit
codes to "1", but will start ferrying up the exit code as-is in a
subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Libify the determine_submodule_update_strategy() by having it invoke
die_message() rather than die(), and returning the code die_message()
returns on failure.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code downstream of module_update() to short-circuit and return
to the top-level on failure, rather than calling exit().
To do so we need to diligently check whether we "must_die_on_failure",
which is a pattern started in c51f8f94e5 (submodule--helper: run
update procedures from C, 2021-08-24), but which hadn't been completed
to the point where we could avoid calling exit() here.
This introduces no functional changes, but makes it easier to both
call these routines as a library in the future, and to eventually
avoid leaking memory.
This and similar control flow in submodule--helper.c could be made
simpler by properly "libifying" it, i.e. to have it consistently
return -1 on failures, and to early return on any non-success.
But let's leave that larger project for now, and (mostly) emulate what
were doing with the "exit(128)" before this change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply some DRY principles in run_update_command() and don't have two
"switch" statements over "ud->update_strategy.type" determine the same
thing.
First we were setting "must_die_on_failure = 1" in all cases except
"SM_UPDATE_CHECKOUT" (and we'd BUG(...) out on the rest). This code
was added in c51f8f94e5 (submodule--helper: run update procedures
from C, 2021-08-24).
Then we'd duplicate same "switch" logic when we were using the
"must_die_on_failure" variable.
Let's instead have the "case" branches in that inner "switch"
determine whether or not the "update must continue" by picking an exit
code.
This also mostly avoids hardcoding the "128" exit code, instead we can
make use of the return value of the die_message() function, which
we've been calling here since 55b3f12cb5 (submodule update: use
die_message(), 2022-03-15). We're still hardcoding it to determine if
we "exit()", but subsequent commit(s) will address that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the submodule_strategy_to_string() function added in
3604242f08 (submodule: port init from shell to C, 2016-04-15) to
really return a "const char *". In the "SM_UPDATE_COMMAND" case it
would return a strbuf_detach().
Furthermore, this function would return NULL on SM_UPDATE_UNSPECIFIED,
so it wasn't safe to xstrdup() its return value in the general case,
or to use it in a sprintf() format as the code removed in the
preceding commit did.
But its callers would never call it with either SM_UPDATE_UNSPECIFIED
or SM_UPDATE_COMMAND. Let's have its behavior reflect how its only
user expects it to behave, and BUG() out on the rest.
By doing this we can also stop needlessly xstrdup()-ing and free()-ing
the memory for the config we're setting. We can instead always use
constant strings. We can also use the *_tmp() variant of
git_config_get_string().
Let's also rename this submodule_strategy_to_string() function to
submodule_update_type_to_string(). Now that it's only tasked with
returning a string version of the "enum submodule_update_type type".
Before it would look at the "command" field in "struct
submodule_update_strategy".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't call submodule_strategy_to_string() in a BUG() message. These
calls added in c51f8f94e5 (submodule--helper: run update procedures
from C, 2021-08-24) don't need the extra information
submodule_strategy_to_string() gives us, as we'll never reach the
SM_UPDATE_COMMAND case here.
That case is the only one where we'd get any information beyond the
straightforward number-to-string mapping.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing braces to an "else" arm in init_submodule(), this
stylistic change makes this code conform to the CodingGuidelines, and
makes a subsequent commit smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend the update_submodule() function to return the failing "ret" on
error, instead of overriding it with "1".
This code was added in b3c5f5cb04 (submodule: move core cmd_update()
logic to C, 2022-03-15), and this change ends up not making a
difference as this function is only called in update_submodules(). If
we return non-zero here we'll always in turn return "1" in
module_update().
But if we didn't do that and returned any other non-zero exit code in
update_submodules() we'd fail the test that's being amended
here. We're still testing the status quo here.
This change makes subsequent refactoring of update_submodule() easier,
as we'll no longer need to worry about clobbering the "ret" we get
from the run_command().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the "res" variable added in b3c5f5cb04 (submodule: move core
cmd_update() logic to C, 2022-03-15) to "ret", which is the convention
in the rest of this file.
Eventual follow-up commits will change the code in update_submodule()
to a "goto cleanup" pattern, let's have the post image look consistent
with the rest. For update_submodules() let's also use a "ret" for
consistency, that use was also added in b3c5f5cb04. We'll be
modifying that codepath in subsequent commits.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "res" variable must be true at this point in update_submodule(),
as just a few lines above this we've unconditionally:
if (!res)
return 0;
So we don't need to guard the "return 1" with an "else if (res)", we
can return unconditionally at this point. See b3c5f5cb04 (submodule:
move core cmd_update() logic to C, 2022-03-15) for the initial
introduction of this code, this check of "res" has always been
redundant.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor code added in e83e3333b5 (submodule: port submodule
subcommand 'summary' from shell to C, 2020-08-13) so that "errmsg" and
"errmsg_str" are folded into one. The distinction between the empty
string and NULL is something that's tested for by
e.g. "t/t7401-submodule-summary.sh".
This is in preparation for fixing a memory leak the "struct strbuf" in
the pre-image.
Let's also pass a "const char *" to print_submodule_summary(), as it
should not be modifying the "errmsg".
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a "const" to the "struct update_data" passed to
run_update_procedure(), which it in turn passes along (peeled) to
is_tip_reachable() and fetch_in_submodule()).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a "const" to the copy of "struct update_data" that's tracked by
the "struct submodule_update_clone", as it neither owns nor modifies
it.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add "const" to the "struct module_clone_data" that we pass to
clone_submodule(), which makes the ownership clear, and stops us from
clobbering the "clone_data->path".
We still need to add to the "reference" member, which is a "struct
string_list". Let's do this by having clone_submodule() create its
own, and copy the contents over, allowing us to pass it as a
separate parameter.
This new "struct string_list" still leaks memory, just as the "struct
module_clone_data" did before. let's not fix that for now, to fix that
we'll need to add some "goto cleanup" to the relevant code. That will
eventually be done in follow-up commits, this change makes it easier
to fix the memory leak.
The scope of the new "reference" variable in add_submodule() could be
narrowed to the "else" block, but as we'll eventually free it with a
"goto cleanup" let's declare it at the start of the function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the only remaining use of a "struct strbuf sb" in
clone_submodule() to live in its own scope. This makes the code
clearer by limiting its lifetime.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use xstrfmt() in clone_submodule() instead of a "struct strbuf" in two
cases where we weren't getting anything out of using the "struct
strbuf".
This changes code that was was added along with other uses of "struct
strbuf" in this function in ee8838d157 (submodule: rewrite
`module_clone` shell function in C, 2015-09-08).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the less verbose { 0 }-initialization syntax rather than memset()
in builtin/submodule--helper.c, this doesn't make a difference in
terms of behavior, but as we're about to modify adjacent code makes
this more consistent, and lets us avoid worrying about when the
memset() happens v.s. a "goto cleanup".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the preceding commit fixed style issues with \n\n among the
declared variables let's fix the minor stylistic issues with those
variables not being consistently followed by a \n\n.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usual style in the codebase is to separate declared variables with
a single newline, not two, let's adjust this code to conform to
that. This makes the eventual addition of various "int ret" variables
more consistent.
In doing this the comment added in 2964d6e5e1 (submodule: port
subcommand 'set-branch' from shell to C, 2020-06-02) might become
ambiguous to some, although it should be clear what it's referring to,
let's move it above the 'OPT_NOOP_NOARG('q', "quiet")' to make that
clearer.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As its name suggests the "resolve-relative-url-test" has never been
used outside of the test suite, see 63e95beb08 (submodule: port
resolve_relative_url from shell to C, 2016-04-15) for its original
addition.
Perhaps it would make sense to drop this code entirely, as we feel
that we've got enough indirect test coverage, but let's leave that
question to a possible follow-up change. For now let's keep the test
coverage this gives us.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the "check-name" helper to a test-tool, since
a6226fd772 (submodule--helper: convert the bulk of cmd_add() to C,
2021-08-10) it has only been used by this test, not git-submodule.sh.
As noted with its introduction in 0383bbb901 (submodule-config:
verify submodule names as paths, 2018-04-30) the intent of
t7450-bad-git-dotfiles.sh has always been to unit test the
check_submodule_name() function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new "test-tool submodule" and move the "is-active" subcommand
over to it. It was added in 5c2bd8b77a (submodule--helper: add
is-active subcommand, 2017-03-16), since
a452128a36 (submodule--helper: introduce add-config subcommand,
2021-08-06) it hasn't been used by git-submodule.sh.
Since we're creating a command dispatch similar to test-tool.c itself
let's split out the "struct test_cmd" into a new test-tool-utils.h,
which both this new code and test-tool.c itself can use.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the "submodule--helper list" sub-command, which hasn't been
used by git-submodule.sh since 2964d6e5e1 (submodule: port subcommand
'set-branch' from shell to C, 2020-06-02).
There was a test added in 2b56bb7a87 (submodule helper list: respect
correct path prefix, 2016-02-24) which relied on it, but the right
thing to do here is to delete that test as well.
That test was regression testing the "list" subcommand itself. We're
not getting anything useful from the "list | cut -f2" invocation that
we couldn't get from "foreach 'echo $sm_path'".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "name" helper has not been used since e83e3333b5 (submodule: port
submodule subcommand 'summary' from shell to C, 2020-08-13).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code that implements multi-strategy support in "git merge" has
been clean-up a bit.
* en/merge-multi-strategies:
merge: small code readability improvement
merge: cleanup confusing logic for handling successful merges
The auto-stashed local changes created by "git merge --autostash"
was mixed into a conflicted state left in the working tree, which
has been corrected.
* en/merge-unstash-only-on-clean-merge:
merge: only apply autostash when appropriate
Introduce the "subcommand" mode to parse-options API and update the
command line parser of Git commands with subcommands.
* sg/parse-options-subcommand: (23 commits)
remote: run "remote rm" argv through parse_options()
maintenance: add parse-options boilerplate for subcommands
pass subcommand "prefix" arguments to parse_options()
builtin/worktree.c: let parse-options parse subcommands
builtin/stash.c: let parse-options parse subcommands
builtin/sparse-checkout.c: let parse-options parse subcommands
builtin/remote.c: let parse-options parse subcommands
builtin/reflog.c: let parse-options parse subcommands
builtin/notes.c: let parse-options parse subcommands
builtin/multi-pack-index.c: let parse-options parse subcommands
builtin/hook.c: let parse-options parse subcommands
builtin/gc.c: let parse-options parse 'git maintenance's subcommands
builtin/commit-graph.c: let parse-options parse subcommands
builtin/bundle.c: let parse-options parse subcommands
parse-options: add support for parsing subcommands
parse-options: drop leading space from '--git-completion-helper' output
parse-options: clarify the limitations of PARSE_OPT_NODASH
parse-options: PARSE_OPT_KEEP_UNKNOWN only applies to --options
api-parse-options.txt: fix description of OPT_CMDMODE
t0040-parse-options: test parse_options() with various 'parse_opt_flags'
...
As reported in [1] the "UNUSED(var)" macro introduced in
2174b8c75de (Merge branch 'jk/unused-annotation' into next,
2022-08-24) breaks coccinelle's parsing of our sources in files where
it occurs.
Let's instead partially go with the approach suggested in [2] of
making this not take an argument. As noted in [1] "coccinelle" will
ignore such tokens in argument lists that it doesn't know about, and
it's less of a surprise to syntax highlighters.
This undoes the "help us notice when a parameter marked as unused is
actually use" part of 9b24034754 (git-compat-util: add UNUSED macro,
2022-08-19), a subsequent commit will further tweak the macro to
implement a replacement for that functionality.
1. https://lore.kernel.org/git/220825.86ilmg4mil.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/220819.868rnk54ju.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up to remove unused function parameters.
* jk/unused-fixes:
xdiff: drop unused mmfile parameters from xdl_do_patience_diff()
reflog: assert PARSE_OPT_NONEG in parse-options callbacks
reftable: drop unused parameter from reader_seek_linear()
verify_one_sparse(): drop unused parameters
match_pathname(): drop unused "flags" parameter
log-tree: drop unused commit param in remerge_diff()
xdiff: drop unused mmfile parameters from xdl_do_histogram_diff()
The namespaces used by "log --decorate" from "refs/" hierarchy by
default has been tightened.
* ds/decorate-filter-tweak:
fetch: use ref_namespaces during prefetch
maintenance: stop writing log.excludeDecoration
log: create log.initialDecorationSet=all
log: add --clear-decorations option
log: add default decoration filter
log-tree: use ref_namespaces instead of if/else-if
refs: use ref_namespaces for replace refs base
refs: add array of ref namespaces
t4207: test coloring of grafted decorations
t4207: modernize test
refs: allow "HEAD" as decoration filter
As the need to use the "--force-in-body-from" option primarily is
tied to which mailing list the mails go to (and get their From:
address mangled), it is likely that a user who needs to use this
option once to interact with their upstream project needs to use it
for all patches they send out.
Add a configuration variable, suitable for setting in the local
configuration file per repository, for this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users may be authoring and committing their commits under the same
e-mail address they use to send their patches from, in which case
they shouldn't need to use the in-body From: line in their outgoing
e-mails. At the receiving end, "git am" will use the address on the
"From:" header of the incoming e-mail and all should be well.
Some mailing lists, however, mangle the From: address from what the
original sender had; in such a situation, the user may want to add
the in-body "From:" header even for their own patches.
"git format-patch --[no-]force-in-body-from" was invented for such
users.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While cron is specified by POSIX, there are a wide variety of
implementations in use. "git maintenance" assumes that the
"crontab" command can be fed from its standard input the new
contents and the syntax to do so is not to have any filename
argument, as POSIX describes. However, on FreeBSD, the cron
implementation requires a file name argument: if the user wants to
edit standard input, they must specify "-".
Unfortunately, POSIX systems do not have to interpret "-" on the
command line of crontab as a request to read from the standard
input. Blindly adding "-" on the command line would not work as a
general solution.
Since POSIX tells us that cron must accept a file name argument, let's
solve this problem by specifying a temporary file instead. This will
ensure that we work with the vast majority of implementations.
Note that because delete_tempfile closes the file for us, we should not
call fclose here on the handle, since doing so will introduce a double
free.
Reported-by: Renato Botelho <garga@FreeBSD.org>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes to sparse index compatibility work for "reset" and "checkout"
commands.
source: <pull.1312.v3.git.1659985672.gitgitgadget@gmail.com>
* vd/sparse-reset-checkout-fixes:
unpack-trees: unpack new trees as sparse directories
cache.h: create 'index_name_pos_sparse()'
oneway_diff: handle removed sparse directories
checkout: fix nested sparse directory diff in sparse index
Teach Git to provide a way for users to enable/disable bitmap lookup
table extension by providing a config option named 'writeBitmapLookupTable'.
Default is false.
Also add test to verify writting of lookup table.
Mentored-by: Taylor Blau <me@ttaylorr.com>
Co-Mentored-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Co-Authored-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git range-diff` command can be quite expensive, which is not a
surprise given that the underlying algorithm to match up pairs of
commits between the provided two commit ranges has a cubic runtime.
Therefore it makes sense to restrict the commit ranges as much as
possible, to reduce the amount of input to that O(N^3) algorithm.
In chatty repositories with wide trees, this is not necessarily
possible merely by choosing commit ranges wisely.
Let's give users another option to restrict the commit ranges: by
providing a pathspec. That helps in repositories with wide trees because
it is likely that the user has a good idea which subset of the tree they
are actually interested in.
Example:
git range-diff upstream/main upstream/seen HEAD -- range-diff.c
This shows commits that are either in the local branch or in `seen`, but
not in `main`, skipping all commits that do not touch `range-diff.c`.
Note: Since we piggy-back the pathspecs onto the `other_arg` mechanism
that was introduced to be able to pass through the `--notes` option to
the revision machinery, we must now ensure that the `other_arg` array is
appended at the end (the revision range must come before the pathspecs,
if any).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch lets `range-diff` validate the arguments not only when
invoked with one or two arguments, but also in the code path where three
arguments are handled.
While at it, we now use `usage_msg_opt*()` consistently.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In d9c66f0b5b (range-diff: first rudimentary implementation,
2018-08-13), we introduced the argument handling of the `range-diff`
command, special-casing three different stanzas based on the argument
count.
The somewhat unorthodox order (first handling the case of 2 arguments,
then 3, then 1) was chosen for clarity: the natural argument number is 2
because that is how many revision ranges are used internally. The code
to handle three arguments is relatively trivial, so it was added next.
And finally, the code to ungarble a single symmetric range into two
separate ones was added, because it was the most complicated (the most
inelegant part being about interpreting empty sides of the symmetric
range as `HEAD`).
In preparation for allowing pathspecs in `git range-diff` invocations,
where we no longer have the luxury of using the number of arguments to
disambiguate between these three different ways to specify the commit
ranges, we need to order these cases by argument count, in descending
order.
This patch is best viewed with `--color-moved`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "diagnose" feature to create a zip archive for diagnostic
material has been lifted from "scalar" and made into a feature of
"git bugreport".
* vd/scalar-generalize-diagnose:
scalar: update technical doc roadmap
scalar-diagnose: use 'git diagnose --mode=all'
builtin/bugreport.c: create '--diagnose' option
builtin/diagnose.c: add '--mode' option
builtin/diagnose.c: create 'git diagnose' builtin
diagnose.c: add option to configure archive contents
scalar-diagnose: move functionality to common location
scalar-diagnose: move 'get_disk_info()' to 'compat/'
scalar-diagnose: add directory to archiver more gently
scalar-diagnose: avoid 32-bit overflow of size_t
scalar-diagnose: use "$GIT_UNZIP" in test
The "git remote rm" command's option parsing is fairly primitive: it
insists on a single argument, which it treats as the remote name, and
displays a usage message otherwise.
This is OK, and maybe even convenient, as you could run:
git remote rm --foo
to drop a remote named "--foo". But it's also weirdly unlike most of the
rest of Git, which would complain that there is no option "--foo". The
right way to spell it by our conventions is:
git remote rm -- --foo
but this doesn't currently work.
So let's bring the command in line with the rest of Git (including its
sibling subcommands!) by feeding argv to parse_options(). We already
have an empty options array for the usage helper.
Note that we have to adjust the argc index down by one, as
parse_options() eats the program name from the start of the array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several of the git-maintenance subcommands don't take any options, so
they don't bother looking at argv at all. This means they'll silently
accept garbage, like:
$ git maintenance register --foo
[no output]
$ git maintenance stop bar
[no output]
Let's give them the basic boilerplate to detect and handle these cases:
$ git maintenance register --foo
error: unknown option `foo'
usage: git maintenance register
$ git maintenance stop bar
usage: git maintenance stop
We could reduce the number of lines of code here a bit with a shared
helper function. But it's worth building out the boilerplate, as it may
serve as the base for adding options later.
Note one complication: maintenance_start() calls directly into
maintenance_register(), so it now needs to pass a plausible argv (we
don't care, but parse_options() is expecting there to at least be an
argv[0] program name). This is an extra line of code, but it eliminates
the need for an explanatory comment.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent commits such as bf0a6b65fc (builtin/multi-pack-index.c: let
parse-options parse subcommands, 2022-08-19) converted a few functions
to match our usual argc/argv/prefix conventions, but the prefix argument
remains unused.
However, there is a good use for it: they should pass it to their own
parse_options() functions, where it may be used to adjust the value of
any filename options. In all but one of these functions, there's no
behavior change, since they don't use OPT_FILENAME. But this is an
actual fix for one option, which you can see by modifying the test suite
like so:
diff --git a/t/t5326-multi-pack-bitmaps.sh b/t/t5326-multi-pack-bitmaps.sh
index 4fe57414c1..d0974d4371 100755
--- a/t/t5326-multi-pack-bitmaps.sh
+++ b/t/t5326-multi-pack-bitmaps.sh
@@ -186,7 +186,11 @@ test_expect_success 'writing a bitmap with --refs-snapshot' '
# Then again, but with a refs snapshot which only sees
# refs/tags/one.
- git multi-pack-index write --bitmap --refs-snapshot=snapshot &&
+ (
+ mkdir subdir &&
+ cd subdir &&
+ git multi-pack-index write --bitmap --refs-snapshot=../snapshot
+ ) &&
test_path_is_file $midx &&
test_path_is_file $midx-$(midx_checksum $objdir).bitmap &&
I'd emphasize that this wasn't broken by bf0a6b65fc; it has been broken
all along, because the sub-function never got to see the prefix. It is
that commit which is actually enabling us to fix it (and which also
brought attention to the problem because it triggers -Wunused-parameter!)
The other functions changed here don't use OPT_FILENAME at all. In their
cases this isn't fixing anything visible, but it's following the usual
pattern and future-proofing them against somebody adding new options and
being surprised.
I didn't include a test for the one visible case above. We don't
generally test routine parse-options behavior for individual options.
The challenge here was finding the problem, and now that this has been
done, it's not likely to regress. Likewise, we could apply the patch
above to cover it "for free" but it makes reading the rest of the test
unnecessarily complicated.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After our loop through the selected strategies, we compare best_strategy
to wt_strategy. This is fine, but the fact that the code setting
best_strategy sets it to use_strategies[i]->name requires a little bit
of extra checking to determine that at the time of setting, that's the
same as wt_strategy. Just setting best_strategy to wt_strategy makes it
a little easier to verify what the loop is doing, at least for this
reader.
Further, use_strategies[i]->name is used in a number of places, where we
could just use wt_strategy. The latter takes less time for this reader
to parse (one variable name instead of three), so just use wt_strategy
to make the code slightly faster for human readers to parse.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/merge.c has a loop over the specified strategies, where if they
all fail with conflicts, it picks the one with the least number of
conflicts.
In the codepath that finds a successful merge, if an automatic commit
was wanted, the code breaks out of the above loop, which makes sense.
However, if the user requested there be no automatic commit, the loop
would continue. That seems weird; --no-commit should not affect the
choice of merge strategy, but the code as written makes one think it
does. However, since the loop itself embeds "!merge_was_ok" as a
condition on continuing to loop, it actually would also exit early if
--no-commit was specified, it just exited from a different location.
Restructure the code slightly to make it clear that the loop will
immediately exit whenever we find a merge strategy that is successful.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a merge failed and we are leaving conflicts in the working directory
for the user to resolve, we should not attempt to apply any autostash.
Further, if we fail to apply the autostash (because either the merge
failed, or the user requested --no-commit), then we should instruct the
user how to apply it later.
Add a testcase verifying we have corrected this behavior.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --bundle-uri option was added in 5556891961 (clone: add
--bundle-uri option, 2022-08-09), but this also introduced a call to
repo_init() whose return value was ignored. Fix that ignored value by
warning that the bundle URI process could not continue if it failed.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the spirit of 517fe807d6 (assert NOARG/NONEG behavior of
parse-options callbacks, 2018-11-05), this asserts that our callbacks
were invoked using the right flags (since otherwise they'd segfault on
the NULL arg). Both cases are already correct here, so this is mostly
about annotating the functions, and appeasing -Wunused-parameters.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The start_async(), etc, functions need a "proc" callback that conforms
to a particular interface. Not every callback needs every parameter
(e.g., the caller might not even ask to open an input descriptor, in
which case there is no point in the callback looking at it). Let's mark
these for -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We pass a callback to read_tree_recursive(), but not every callback
needs every parameter. Let's mark the unused ones to satisfy
-Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
