Commit Graph

850 Commits

Author SHA1 Message Date
3dfb9278df Add --relative-date option to the revision interface
Exposes the infrastructure from 9a8e35e987.

Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-28 16:20:33 -07:00
d5d0a0e748 Merge branch 'ts/daemon'
* ts/daemon:
  Added support for dropping privileges to git-daemon.
2006-08-27 17:51:42 -07:00
b32d37a3a6 Merge branch 'jc/apply'
* jc/apply:
  git-apply --reject: finishing touches.
  apply --reject: count hunks starting from 1, not 0
  git-apply --verbose
  git-apply --reject: send rejects to .rej files.
  git-apply --reject
  apply --reverse: tie it all together.
  diff.c: make binary patch reversible.
  builtin-apply --reverse: two bugfixes.
2006-08-27 17:51:05 -07:00
8938045a4e git-apply --reject: finishing touches.
After a failed "git am" attempt:

	git apply --reject --verbose .dotest/patch

applies hunks that are applicable and leaves *.rej files the
rejected hunks, and it reports what it is doing.  With --index,
files with a rejected hunk do not get their index entries
updated at all, so "git diff" will show the hunks that
successfully got applied.

Without --verbose to remind the user that the patch updated some
other paths cleanly, it is very easy to lose track of the status
of the working tree, so --reject implies --verbose.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-27 15:53:20 -07:00
e4fbbfe9ec Add git-zip-tree
In the Windows world ZIP files are better supported than tar files.
Windows even includes built-in support for ZIP files nowadays.

git-zip-tree is similar to git-tar-tree; it creates ZIP files out of
git trees.  It stores the commit ID (if available) in a ZIP file comment
which can be extracted by unzip.

There's still quite some room for improvement: this initial version
supports no symlinks, calls write() way too often (three times per file)
and there is no unit test.

[jc: with a minor typefix to avoid void* arithmetic]

Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-26 18:27:35 -07:00
b22d449721 git-svn: add the 'dcommit' command
This is a high-level wrapper around the 'commit-diff' command
and used to produce cleaner history against the mirrored repository
through rebase/reset usage.

It's basically a more polished version of this:

for i in `git rev-list --no-merges remotes/git-svn..HEAD | tac`; do
	git-svn commit-diff $i~1 $i
done
git reset --hard remotes/git-svn

Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-26 00:59:29 -07:00
2e93115ed8 git-svn: recommend rebase for syncing against an SVN repo
Does this make sense to other git-svn users out there?

pull can give funky history unless you understand how git-svn works
internally, which users should not be expected to do.

Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-25 21:26:26 -07:00
0ea4d4c94b git-svn(1): improve asciidoc markup
Use list continuation to have better wrapping. This accounts for most of
the changes because it reindents a lot of text without applying other
changes.

Use cross-referencing for interlinking and the gitlink macro for pointing
to other tools in the git suite.

Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-25 19:26:29 -07:00
8b70004b8f git(7): put the synopsis in a verse style paragraph
... so it wraps properly in small terminals.

Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-25 19:26:21 -07:00
5164b6cd3c gitk(1): expand the manpage to look less like a template
Add a short description and document a few selected options additionally to
the different "entities" in the standard calling convention. Advertise
other git repository browsers. Lastly, climb Mount Ego.

Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-25 19:26:11 -07:00
26e8c5d385 git-blame(1): mention options in the synopsis and advertise pickaxe
Inspired by the cvs annotate documentation improve and expand the man page
to also mention the limitations of file annotations. Since people coming
from the SVN/CVS world might first look here, also briefly advertise how
the pickaxe interface makes it easy to go beyond these limitation.

Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-25 19:26:05 -07:00
0dde68998c git-ls-remote(1): document --upload-pack
... and mention that '.' will list the local repo references.

Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-25 19:25:58 -07:00
5684ed6d32 git-apply(1): document missing options and improve existing ones
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-25 19:25:46 -07:00
7099c9c7c9 update-index -g
I often find myself typing this but the common abbreviation "g" for
"again" has not been supported so far for some unknown reason.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-23 21:24:47 -07:00
678dac6b45 Added support for dropping privileges to git-daemon.
Signed-off-by: Tilman Sauerbeck <tilman@code-monkey.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-22 16:40:40 -07:00
57dc397cff git-apply --reject
With the new flag "--reject", hunks that do not apply are sent to
the standard output, and the usable hunks are applied.  The command
itself exits with non-zero status when this happens, so that the
user or wrapper can take notice and sort the remaining mess out.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-17 01:23:08 -07:00
2cda1a214e apply --reverse: tie it all together.
Add a few tests, usage string, and documentation.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-16 21:08:45 -07:00
520cd3eca5 Documentation/technical/racy-git.txt
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-15 21:32:54 -07:00
edbda4d6af Merge branch 'js/color-diff' 2006-08-12 19:24:47 -07:00
cd5fff64e6 Merge branch 'jc/grep' 2006-08-12 19:16:33 -07:00
71c87795c3 Merge branch 'ml/pager' 2006-08-12 19:13:25 -07:00
0d042fecf2 git-grep: show pathnames relative to the current directory
By default, the command shows pathnames relative to the current
directory.  Use --full-name (the same flag to do so in ls-files)
if you want to see the full pathname relative to the project root.

This makes it very pleasant to run in Emacs compilation (or
"grep-find") buffer.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-11 19:08:10 -07:00
f59a59e22f Add the --color-words option to the diff options family
With this option, the changed words are shown inline. For example,
if a file containing "This is foo" is changed to "This is bar", the diff
will now show "This is " in plain text, "foo" in red, and "bar" in green.

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-10 15:28:57 -07:00
65cdb5f165 Add Documentation/howto/setup-git-server-over-http.txt
A small howto on how to setup GIT over HTTP transport protocol by
setting up WebDAV access on apache2.

[jc: minimum ispell fixes applied]

Signed-off-by: Rutger Nijlunsing <git@tux.tmfweb.nl>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-10 15:07:11 -07:00
1d17c25c38 Fix tutorial-2.html
Honza Pazdziora noticed that one example did not match reality.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-09 01:03:39 -07:00
fb6ff943de Documentation: git-status takes the same options as git-commit
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-08 21:55:05 -07:00
d5dc6a76d4 Update git-init-db(1) and documentation of core.sharedRepository
Combine option descriptions in git-init-db(1). Reflect the changes to
additionally allow all users to read the created git repository.

Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-08 17:45:20 -07:00
d249b45547 Document rev-list's option --merge
Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-04 02:08:02 -07:00
f5fffbd3e8 Documentation/git.txt: link git-svn and git-instaweb from the main page.
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-03 16:28:24 -07:00
fba0cbd95d git-grep: document --and, --or, --not, ( and )
[jc: added an example section.]

Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-02 17:05:34 -07:00
7fe08af485 Documentation: convert uses of git-link macro to gitlink
There isn't and never was such a macro; all uses are typos.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-02 11:32:04 -07:00
8f615493e6 git-push: allow -f as an alias for --force
This was already documented in the options section of the manpage. This
patch implements it, adds it to the usage message, and mentions it at the
top of the manpage.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-02 11:30:42 -07:00
c27d205aae pager: environment variable GIT_PAGER to override PAGER
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-31 15:51:25 -07:00
aa086eb813 pager: config variable pager.color
enable/disable colored output when the pager is in use

Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-31 15:32:24 -07:00
b63fafdfd8 tar-tree: illustrate an obscure feature better
Since you can tar just a subdirectory of a certain revision, tell
the users so, by showing an example how to do it.

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-30 18:18:13 -07:00
fff8fd5b1e Merge branch 'pb/multi-fetch'
* pb/multi-fetch:
  Teach git-http-fetch the --stdin switch
  Teach git-local-fetch the --stdin switch
  Make pull() support fetching multiple targets at once
  Make pull() take some implicit data as explicit arguments
2006-07-28 13:25:20 -07:00
205be1ee07 Merge branch 'js/alias-p'
* js/alias-p:
  git wrapper: add --git-dir=<path> and --bare options
  Allow an alias to start with "-p"
2006-07-28 12:33:57 -07:00
8e29f6a07e Teach git-http-fetch the --stdin switch
Speeds up things quite a lot when fetching tags with Cogito.

Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-27 19:33:48 -07:00
8e87ca6615 Teach git-local-fetch the --stdin switch
This makes it possible to fetch many commits (refs) at once, greatly
speeding up cg-clone.

Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-27 19:33:48 -07:00
6c35119ac7 daemon: documentation for --reuseaddr, --detach and --pid-file
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-27 13:55:31 -07:00
24cf6e5847 Merge branch 'pb/configure'
* pb/configure:
  Rename man1 and man7 variables to man1dir and man7dir
  Allow INSTALL, bindir, mandir to be set in main Makefile
2006-07-26 13:35:35 -07:00
6acbcb927f git wrapper: add --git-dir=<path> and --bare options
With this, you can say

	git --bare repack -a -d

inside a bare repository, and it will actually work. While at it,
also move the --version, --help and --exec-path options to the
handle_options() function.

While at documenting the new options, also document the --paginate
option.

Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-25 14:15:47 -07:00
e79992abdb Merge branch 'jt/format-patch'
* jt/format-patch:
  builtin-log: typefix for recent format-patch changes.
  Add option to set initial In-Reply-To/References
  Add option to enable threading headers
  git-format-patch: Make the second and subsequent mails replies to the first
2006-07-25 12:54:57 -07:00
83e12e51c1 Merge branch 'lt/objformat'
* lt/objformat:
  sha1_file: add the ability to parse objects in "pack file format"
2006-07-24 17:38:03 -07:00
4812a93a8c pack-objects: check pack.window for default window size
For some repositories, deltas simply don't make sense. One can disable
them for git-repack by adding --window, but git-push insists on making
the deltas which can be very CPU-intensive for little benefit.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-23 23:40:35 -07:00
ce1a79b6a7 tar-tree: add the "tar.umask" config option
By default, git-tar-tree(1) sets file and directories modes to 0666
or 0777. While this is both useful and acceptable for projects such
as the Linux Kernel, it might be excessive for other projects. With
this variable, it becomes possible to tell git-tar-tree(1) to apply
a specific umask to the modes above. The special value "user"
indicates that the user's current umask will be used. This should be
enough for most projects, as it will lead to the same permissions as
git-checkout(1) would use. The default value remains 0, which means
world read-write.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Acked-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-23 23:35:13 -07:00
1b91abe350 cvsexportcommit - add -a (add author line) flag, cleanup warnings
This patch adds support for -a which will add an "Author: " line, and possibly
a "Committer: " line to the bottom of the commit message for CVS.

The commit message parser is now a little bit better, and some warnings
have been cleaned up.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-23 22:51:14 -07:00
da56645dd7 Add option to set initial In-Reply-To/References
Add the --in-reply-to option to provide a Message-Id for an initial
In-Reply-To/References header, useful for including a new patch series as part
of an existing thread.

Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-14 20:41:37 -07:00
cc35de8470 Add option to enable threading headers
Add a --thread option to enable generation of In-Reply-To and References
headers, used to make the second and subsequent mails appear as replies to the
first.

Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-14 20:41:37 -07:00
a3e65d74ee Documentation/urls.txt: Use substitution to escape square brackets
This changes "[user@]" to use {startsb} and {endsb} to insert [ and ],
similar to how {caret} is used in git-rev-parse.txt.

[jc: Removed a well-intentioned comment that broke the final
 formatting from the original patch.  While we are at it,
 updated the paragraph that claims to be equivalent to the
 section that was updated earlier without making matching
 changes.]

Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-14 16:36:00 -07:00