Code clean-up.
* jc/range-diff-lazy-setup:
remerge-diff: clean up temporary objdir at a central place
remerge-diff: lazily prepare temporary objdir on demand
In a few corner cases "git diff --exit-code" failed to report
"changes" (e.g., renamed without any content change), which has
been corrected.
* rs/diff-exit-code-fix:
diff: report dirty submodules as changes in builtin_diff()
diff: report copies and renames as changes in run_diff_cmd()
The diff machinery has two ways to detect changes to set the exit code:
Just comparing hashes and comparing blob contents. The latter is needed
if certain changes have to be ignored, e.g. with --ignore-space-change
or --ignore-matching-lines. It's enabled by the diff_options flag
diff_from_contents.
The slower mode as never considered submodules (and subrepos) as changes
with --submodule=diff or --submodule=log, which is inconsistent with
--submodule=short (the default). Fix it.
d7b97b7185 (diff: let external diffs report that changes are
uninteresting, 2024-06-09) set diff_from_contents if external diff
programs are allowed. This is the default e.g. for git diff, and so
that change exposed the inconsistency much more widely.
Reported-by: David Hull <david.hull@friendbuy.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff machinery has two ways to detect changes to set the exit code:
Just comparing hashes and comparing blob contents. The latter is needed
if certain changes have to be ignored, e.g. with --ignore-space-change
or --ignore-matching-lines. It's enabled by the diff_options flag
diff_from_contents.
The slower mode has never considered copies and renames to be changes,
which is inconsistent with the quicker one. Fix it. Even if we ignore
the file contents (because it's empty or contains only ignored lines),
there's still the meta data change of adding or changing a filename, so
we need to report it in the exit code.
d7b97b7185 (diff: let external diffs report that changes are
uninteresting, 2024-06-09) set diff_from_contents if external diff
programs are allowed. This is the default e.g. for git diff, and so
that change exposed the inconsistency much more widely.
Reported-by: Jorge Luis Martinez Gomez <jol@jol.dev>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `objfind` and `anchors` members of `struct diff_options` are
populated via option parsing, but are never freed in `diff_free()`. Fix
this to plug those memory leaks.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing invalid ignore regexes passed via the `-I` option we don't
free already-allocated memory, leading to a memory leak. Fix this.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After running a diff between two things, or a series of diffs while
walking the history, the diff computation is concluded by a call to
diff_result_code() to extract the exit status of the diff machinery.
The function can work on "struct diffopt", but all the callers
historically and currently pass "struct diffopt" that is embedded in
the "struct rev_info" that is used to hold the remerge_diff bit and
the remerge_objdir variable that points at the temporary object
directory in use.
Redefine diff_result_code() to take the whole "struct rev_info" to
give it an access to these members related to remerge-diff, so that
it can get rid of the temporary object directory for any and all
callers that used the feature. We can lose the equivalent code to
do so from the code paths for individual commands, diff-tree, diff,
and log.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --no-ext-diff" when diff.external is configured ignored
the "--color-moved" option.
* rs/diff-color-moved-w-no-ext-diff-fix:
diff: allow --color-moved with --no-ext-diff
A CPP macro USE_THE_REPOSITORY_VARIABLE is introduced to help
transition the codebase to rely less on the availability of the
singleton the_repository instance.
* ps/use-the-repository:
hex: guard declarations with `USE_THE_REPOSITORY_VARIABLE`
t/helper: remove dependency on `the_repository` in "proc-receive"
t/helper: fix segfault in "oid-array" command without repository
t/helper: use correct object hash in partial-clone helper
compat/fsmonitor: fix socket path in networked SHA256 repos
replace-object: use hash algorithm from passed-in repository
protocol-caps: use hash algorithm from passed-in repository
oidset: pass hash algorithm when parsing file
http-fetch: don't crash when parsing packfile without a repo
hash-ll: merge with "hash.h"
refs: avoid include cycle with "repository.h"
global: introduce `USE_THE_REPOSITORY_VARIABLE` macro
hash: require hash algorithm in `empty_tree_oid_hex()`
hash: require hash algorithm in `is_empty_{blob,tree}_oid()`
hash: make `is_null_oid()` independent of `the_repository`
hash: convert `oidcmp()` and `oideq()` to compare whole hash
global: ensure that object IDs are always padded
hash: require hash algorithm in `oidread()` and `oidclr()`
hash: require hash algorithm in `hasheq()`, `hashcmp()` and `hashclr()`
hash: drop (mostly) unused `is_empty_{blob,tree}_sha1()` functions
We ignore the option --color-moved if an external diff program is
configured, presumably because its overhead is unnecessary in that case.
Respect the option if we don't actually use the external diff, though.
Reported-by: lolligerhans@gmx.de
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --exit-code --ext-diff" learned to take the exit status
of the external diff driver into account when deciding the exit
status of the overall "git diff" invocation when configured to do
so.
* rs/diff-exit-code-with-external-diff:
diff: let external diffs report that changes are uninteresting
userdiff: add and use struct external_diff
t4020: test exit code with external diffs
Use of the `the_repository` variable is deprecated nowadays, and we
slowly but steadily convert the codebase to not use it anymore. Instead,
callers should be passing down the repository to work on via parameters.
It is hard though to prove that a given code unit does not use this
variable anymore. The most trivial case, merely demonstrating that there
is no direct use of `the_repository`, is already a bit of a pain during
code reviews as the reviewer needs to manually verify claims made by the
patch author. The bigger problem though is that we have many interfaces
that implicitly rely on `the_repository`.
Introduce a new `USE_THE_REPOSITORY_VARIABLE` macro that allows code
units to opt into usage of `the_repository`. The intent of this macro is
to demonstrate that a certain code unit does not use this variable
anymore, and to keep it from new dependencies on it in future changes,
be it explicit or implicit
For now, the macro only guards `the_repository` itself as well as
`the_hash_algo`. There are many more known interfaces where we have an
implicit dependency on `the_repository`, but those are not guarded at
the current point in time. Over time though, we should start to add
guards as required (or even better, just remove them).
Define the macro as required in our code units. As expected, most of our
code still relies on the global variable. Nearly all of our builtins
rely on the variable as there is no way yet to pass `the_repository` to
their entry point. For now, declare the macro in "biultin.h" to keep the
required changes at least a little bit more contained.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both `oidread()` and `oidclr()` use `the_repository` to derive the hash
function that shall be used. Require callers to pass in the hash
algorithm to get rid of this implicit dependency.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a todo comment in `release_revisions()` that mentions that we
need to free the diff options, which was added via 54c8a7c379 (revisions
API: add a TODO for diff_free(&revs->diffopt), 2022-04-14). Releasing
the diff options wasn't quite feasible at that time because some call
sites rely on its contents to remain even after the revisions have been
released.
In fact, there really only are a couple of callsites that misbehave
here:
- `cmd_shortlog()` releases the revisions, but continues to access its
file pointer.
- `do_diff_cache()` creates a shallow copy of `struct diff_options`,
but does not set the `no_free` member. Consequently, we end up
releasing resources of the caller-provided diff options.
- `diff_free()` and friends do not play nice when being called
multiple times as they don't unset data structures that they have
just released.
Fix all of those cases and enable the call to `diff_free()`, which plugs
a bunch of memory leaks.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The options --exit-code and --quiet instruct git diff to indicate
whether it found any significant changes by exiting with code 1 if it
did and 0 if there were none. Currently this doesn't work if external
diff programs are involved, as we have no way to learn what they found.
Add that ability in the form of the new configuration options
diff.trustExitCode and diff.<driver>.trustExitCode and the environment
variable GIT_EXTERNAL_DIFF_TRUST_EXIT_CODE. They pair with the config
options diff.external and diff.<driver>.command and the environment
variable GIT_EXTERNAL_DIFF, respectively.
The new options are off by default, keeping the old behavior. Enabling
them indicates that the external diff returns exit code 1 if it finds
significant changes and 0 if it doesn't, like diff(1).
The name of the new options is taken from the git difftool and mergetool
options of similar purpose. (There they enable passing on the exit code
of a diff tool and to infer whether a merge done by a merge tool is
successful.)
The new feature sets the diff flag diff_from_contents in
diff_setup_done() if we need the exit code and are allowed to call
external diffs. This disables the optimization that avoids calling the
program with --quiet. Add it back by skipping the call if the external
diff is not able to report empty diffs. We can only do that check after
evaluating the file-specific attributes in run_external_diff().
If we do run the external diff with --quiet, send its output to
/dev/null.
I considered checking the output of the external diff to check whether
its empty. It was added as 11be65cfa4 (diff: fix --exit-code with
external diff, 2024-05-05) and quickly reverted, as it does not work
with external diffs that do not write to stdout. There's no reason why
a graphical diff tool would even need to write anything there at all.
I also considered using a non-zero exit code for empty diffs, which
could be done without adding new configuration options. We'd need to
disable the optimization that allows git diff --quiet to skip calling
external diffs, though -- that might be quite surprising if graphical
diff programs are involved. And assigning the opposite meaning of the
exit codes compared to diff(1) and git diff --exit-code to the external
diff can cause unnecessary confusion.
Suggested-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap the string specifying the external diff command in a new struct to
simplify adding attributes, which the next patch will do.
Make sure external_diff() still returns NULL if neither the environment
variable GIT_EXTERNAL_DIFF nor the configuration option diff.external is
set, to continue allowing its use in a boolean context.
Use a designated initializer for the default builtin userdiff driver to
adjust to the type change of the second struct member. Spelling out
only the non-zero members improves readability as a nice side-effect.
No functional change intended.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `fill_textconv()` function is responsible for converting an input
file with a textconv driver, which is then passed to the caller. Weirdly
though, the function also handles the case where there is no textconv
driver at all. In that case, it will return either the contents of the
populated filespec, or an empty string if the filespec is invalid.
These two cases have differing memory ownership semantics. When there is
a textconv driver, then the result is an allocated string. Otherwise,
the result is either a string constant or owned by the filespec struct.
All callers are in fact aware of this weirdness and only end up freeing
the output buffer when they had a textconv driver.
Ideally, we'd split up this interface to only perform the conversion via
the textconv driver, and BUG in case the caller didn't provide one. This
would make memory ownership semantics much more straight forward. For
now though, let's simply cast the empty string constant to `char *` to
avoid a warning with `-Wwrite-strings`. This is equivalent to the same
cast that we already have in `fill_mmfile()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're about to enable `-Wwrite-strings`, which changes the type of
string constants to `const char[]`. Fix various sites where we assign
such constants to non-const variables.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The out parameter of `git_config_string()` is a `const char **` even
though we transfer ownership of memory to the caller. This is quite
misleading and has led to many memory leaks all over the place. Adapt
the parameter to instead be `char **`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The source and destination prefixes are tracked in a `const char *`
array, but may at times contain allocated strings. The result is that
those strings may be leaking because we never free them.
Refactor the code to always store allocated strings in those variables,
freeing them as required. This requires us to handle the default values
a bit different compared to before. But given that there is only a
single callsite where we use the variables to `struct diff_options` it's
easy to handle the defaults there.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The out parameter of `git_config_pathname()` is a `const char **` even
though we transfer ownership of memory to the caller. This is quite
misleading and has led to many memory leaks all over the place. Adapt
the parameter to instead be `char **`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--exit-code" option of "git diff" command learned to work with
the "--ext-diff" option.
* rs/external-diff-with-exit-code:
diff: fix --exit-code with external diff
diff: report unmerged paths as changes in run_diff_cmd()
You can ask the diff machinery to let the exit code indicate whether
there are changes, e.g. with --exit-code. It as two ways to calculate
that bit: The quick one assumes blobs with different hashes have
different content, and the more elaborate way actually compares the
contents, possibly applying transformations like ignoring whitespace.
Always use the slower path by setting the flag diff_from_contents,
because any of the files could have an external diff driver set via an
attribute, which might consider binary differences irrelevant, like e.g.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can ask the diff machinery to let the exit code indicate whether
there are changes, e.g. with --quiet. It as two ways to calculate that
bit: The quick one assumes blobs with different hashes have different
content, and the more elaborate way actually compares the contents,
possibly applying transformations like ignoring whitespace.
The quick way considers an unmerged file to be a change and reports
exit code 1, which makes sense.
The slower path uses the struct diff_options member found_changes to
indicate whether the blobs differ even with the transformations applied.
It's not set for unmerged files, though, resulting in exit code 0.
Set found_changes in run_diff_cmd() for unmerged files, for a consistent
exit code of 1 if there's an unmerged file, regardless of whether
whitespace is ignored.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the default prefixes "a/" and "b/" to be tweaked by the
diff.srcPrefix and diff.dstPrefix configuration variables.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some l10n translators translated the parameters "files", "param1" and
"param2" in the following message:
"synonym for --dirstat=files,param1,param2..."
Translating "param1" and "param2" is OK, but changing the parameter
"files" is wrong. The parameters that are not meant to be used verbatim
should be marked as placeholders, but the verbatim parameter not marked
as a placeholder should be left as is.
This change is a complement for commit 51e846e673 (doc: enforce
placeholders in documentation, 2023-12-25).
With the help of Jean-Noël,some parameter combinations in one
placeholder (e.g. "<param1,param2>...") are splited into seperate
placeholders.
Helped-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --no-index file1 file2" segfaulted while invoking the
external diff driver, which has been corrected.
* jk/diff-external-with-no-index:
diff: handle NULL meta-info when spawning external diff
Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
"git diff --no-index file1 file2" segfaulted while invoking the
external diff driver, which has been corrected.
* jk/diff-external-with-no-index:
diff: handle NULL meta-info when spawning external diff
Running this:
$ touch foo bar
$ chmod +x foo
$ git -c diff.external=echo diff --ext-diff --no-index foo bar
results in a segfault. The issue is that run_diff_cmd() passes a NULL
"xfrm_msg" variable to run_external_diff(), which feeds it to
strvec_push(), causing the segfault. The bug dates back to 82fbf269b9
(run_external_diff: use an argv_array for the command line, 2014-04-19),
though it mostly only ever worked accidentally. Before then, we just
stuck the NULL pointer into a "const char **" array, so our NULL ended
up acting as an extra end-of-argv sentinel (which was OK, because it was
the last thing in the array).
Curiously, though, this is only a problem with --no-index. We set up
xfrm_msg by calling fill_metainfo(). This result may be empty, or may
have text like "index 1234..5678\n", "rename from foo\nrename from
bar\n", etc. In run_external_diff(), we only look at xfrm_msg if the
"other" variable is not NULL. That variable is set when the paths of the
two sides of the diff pair aren't the same (in which case the
destination path becomes "other"). So normally it would kick in only for
a rename, in which case xfrm_msg should not be NULL (it would have the
rename information in it).
But with a "--no-index" of two blobs, we of course have two different
pathnames, and thus end up with a non-NULL "other" filename (which is
always just a repeat of the file2-name), but possibly a NULL xfrm_msg.
So how to fix it? I have a feeling that --no-index always passing
"other" to the external diff command is probably a bug. There was no
rename, and the name is always redundant with existing information we
pass (and this may even cause us to pass a useless "xfrm_msg" that
contains an "index 1234..5678" line). So one option would be to change
that behavior. We don't seem to have ever documented the "other" or
"xfrm_msg" parameters for external diffs.
But I'm not sure what fallout we might have from changing that behavior
now. So this patch takes the less-risky option, and simply teaches
run_external_diff() to avoid passing xfrm_msg when it's NULL. That makes
it agnostic to whether "other" and "xfrm_msg" always come as a pair. It
fixes the segfault now, and if we want to change the --no-index "other"
behavior on top, it will handle that, too.
Reported-by: Wilfred Hughes <me@wilfred.me.uk>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove unused header "#include".
* en/header-cleanup:
treewide: remove unnecessary includes in source files
treewide: add direct includes currently only pulled in transitively
trace2/tr2_tls.h: remove unnecessary include
submodule-config.h: remove unnecessary include
pkt-line.h: remove unnecessary include
line-log.h: remove unnecessary include
http.h: remove unnecessary include
fsmonitor--daemon.h: remove unnecessary includes
blame.h: remove unnecessary includes
archive.h: remove unnecessary include
treewide: remove unnecessary includes in source files
treewide: remove unnecessary includes from header files
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config callbacks for a few diff.* variables simply return -1 when we
encounter an error. The message you get mentions the offending location,
like:
fatal: bad config variable 'diff.algorithm' in file '.git/config' at line 7
but is vague about "bad" (as it must be, since the message comes from
the generic config code). Most callbacks add their own messages here, so
let's do the same. E.g.:
error: unknown value for config 'diff.algorithm': foo
fatal: bad config variable 'diff.algorithm' in file '.git/config' at line 7
I've written the string in a way that should be reusable for
translators, and matches another similar message in transport.c (there
doesn't yet seem to be a popular generic message to reuse here, so
hopefully this will get the ball rolling).
Note that in the case of diff.algorithm, our parse_algorithm_value()
helper does detect a NULL value string. But it's still worth detecting
it ourselves here, since we can give a more specific error message (and
which is the usual one for unexpected implicit-bool values).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the config parser sees an "implicit" bool like:
[core]
someVariable
it passes NULL to the config callback. Any callback code which expects a
string must check for NULL. This usually happens via helpers like
git_config_string(), etc, but some custom code forgets to do so and will
segfault.
These are all fairly vanilla cases where the solution is just the usual
pattern of:
if (!value)
return config_error_nonbool(var);
though note that in a few cases we have to split initializers like:
int some_var = initializer();
into:
int some_var;
if (!value)
return config_error_nonbool(var);
some_var = initializer();
There are still some broken instances after this patch, which I'll
address on their own in individual patches after this one.
Reported-by: Carlos Andrés Ramírez Cataño <antaigroupltda@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --no-such-option" and other corner cases around the exit
status of the "diff" command has been corrected.
* jk/diff-result-code-cleanup:
diff: drop useless "status" parameter from diff_result_code()
diff: drop useless return values in git-diff helpers
diff: drop useless return from run_diff_{files,index} functions
diff: die when failing to read index in git-diff builtin
diff: show usage for unknown builtin_diff_files() options
diff-files: avoid negative exit value
diff: spell DIFF_INDEX_CACHED out when calling run_diff_index()
"git diff -w --exit-code" with various options did not work
correctly, which is being addressed.
* jc/diff-exit-code-with-w-fixes:
diff: the -w option breaks --exit-code for --raw and other output modes
t4040: remove test that succeeded for a wrong reason
diff: teach "--stat -w --exit-code" to notice differences
diff: mode-only change should be noticed by "--patch -w --exit-code"
diff: move the fallback "--exit-code" code down
Extract the commonly used initialization of the --stat-width=<width>,
--stat-name-width=<width> and --stat-graph-with=<width> parameters to their
internal default values into a helper function, to avoid repeating the same
initialization code in a few places.
Add a couple of tests to additionally cover existing configuration options
diff.statNameWidth=<width> and diff.statGraphWidth=<width> when used by
git-merge to generate --stat outputs. This closes the gap that existed
previously in the --stat tests, and reduces the chances for having any
regressions introduced by this commit.
While there, perform a small bunch of minor wording tweaks in the improved
unit test, to improve its test-level consistency a bit.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new configuration option diff.statNameWidth=<width> that is equivalent
to the command-line option --stat-name-width=<width>, but it is ignored
by format-patch. This follows the logic established by the already
existing configuration option diff.statGraphWidth=<width>.
Limiting the widths of names and graphs in the --stat output makes sense
for interactive work on wide terminals with many columns, hence the support
for these configuration options. They don't affect format-patch because
it already adheres to the traditional 80-column standard.
Update the documentation and add more tests to cover new configuration
option diff.statNameWidth=<width>. While there, perform a few minor code
and whitespace cleanups here and there, as spotted.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --no-such-option" and other corner cases around the exit
status of the "diff" command has been corrected.
* jk/diff-result-code-cleanup:
diff: drop useless "status" parameter from diff_result_code()
diff: drop useless return values in git-diff helpers
diff: drop useless return from run_diff_{files,index} functions
diff: die when failing to read index in git-diff builtin
diff: show usage for unknown builtin_diff_files() options
diff-files: avoid negative exit value
diff: spell DIFF_INDEX_CACHED out when calling run_diff_index()
"git diff -w --exit-code" with various options did not work
correctly, which is being addressed.
* jc/diff-exit-code-with-w-fixes:
diff: the -w option breaks --exit-code for --raw and other output modes
t4040: remove test that succeeded for a wrong reason
diff: teach "--stat -w --exit-code" to notice differences
diff: mode-only change should be noticed by "--patch -w --exit-code"
diff: move the fallback "--exit-code" code down
The output from "--raw", "--name-status", and "--name-only" modes in
"git diff" does depend on and does not reflect how certain different
contents are considered equal, unlike "--patch" and "--stat" output
modes do, when used with options like "-w" (another way of thinking
about it is that it is not like we recompute the hash of the blob
after removing all whitespaces to show "git diff --raw -w" output).
But the fact that "--raw" and friends ignore "-w" is not a good
excuse for "diff --raw -w --exit-code" to also ignore the request to
report the differences with its exit status. When run without "-w",
"git diff --exit-code --raw" does report with its exit status the
differences as requested, and we should do the same when run with
"-w", too.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many programs use diff_result_code() to get a user-visible program exit
code from a diff result (e.g., checking opts.found_changes if
--exit-code was requested).
This function also takes a "status" parameter, which seems at first
glance that it could be used to propagate an error encountered when
computing the diff. But it doesn't work that way:
- negative values are passed through as-is, but are not appropriate as
program exit codes
- when --exit-code or --check is in effect, we _ignore_ the passed-in
status completely. So a failed diff which did not have a chance to
set opts.found_changes would erroneously report "success, no
changes" instead of propagating the error.
After recent cleanups, neither of these bugs is possible to trigger, as
every caller just passes in "0". So rather than fixing them, we can
simply drop the useless parameter instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When options like "-w" is used while "--exit-code" option is in
effect, instead of the usual "do we have any filepair whose preimage
and postimage have different <mode,object>?" check, we need to compare
the contents of the blobs, taking into account that certain changes
are considered no-op.
With the previous step, we taught "--patch" codepath to set the
.found_changes bit correctly, even for a change that only affects
the mode and not object. The "--stat" codepath, however, did not
set the .found_changes bit at all. This lead to
$ git diff --stat -w --exit-code
for a change that does have an output to exit with status 0.
Set the bit by inspecting the list of paths the diffstat output is
given for (a mode-only change will still appear as a "0-line added
0-line deleted" change) to fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The codepath to notice the content-level changes, taking certain
no-op changes like "ignore whitespace" into account, forgot that
a mode-only change is still a change. This resulted in
$ git diff --patch --exit-code -w
to exit with status 0 even when there is such a mode-only change,
breaking both "--patch" and "--quiet" output formats.
Teach the builtin_diff() codepath that creation and deletion as well
as mode changes are all interesting changes.
Note that the test specifically checks removal of an empty file,
because if there is anything in the preimage (i.e. the removed file
is not empty), the removal would still trigger textual patch output
and the codepath for that does update .found_changes bit to report
that it found an interesting change. We need to make sure that the
.found_changes bit is set even without triggering textual patch
output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "--exit-code" is asked and the code cannot just answer by
comparing the object names on both sides but needs to inspect and
compare the contents, there are two ways that the result is found
out.
Some output modes, like "--stat" and "--patch", inherently have to
inspect the contents in order to show the differences in the way
they do. The codepaths for these modes set the .found_changes bit
as they compute what to show.
However, other output modes do not need to inspect the contents to
show the differences in the way they do. The most notable example
is "--quiet", which does not need to compute any output to show.
When they are asked to report "--exit-code", they run the codepaths
for the "--patch" output with their output redirected to "/dev/null",
only to set the .found_changes bit.
Currently, this fallback invocation of "--patch" output is done
after the "--stat" output format and its friends and before the
"--patch" and internal callback logic. Move it to the end of
the sequence to clarify the fallback status of this code block.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further shuffling of declarations across header files to streamline
file dependencies.
* cw/compat-util-header-cleanup:
git-compat-util: move alloc macros to git-compat-util.h
treewide: remove unnecessary includes for wrapper.h
kwset: move translation table from ctype
sane-ctype.h: create header for sane-ctype macros
git-compat-util: move wrapper.c funcs to its header
git-compat-util: move strbuf.c funcs to its header
