The macro TEST takes a single expression. If a test requires multiple
statements then they need to be placed in a function that's called in
the TEST expression.
Remove the cognitive overhead of defining and calling single-use
functions by using if_test instead.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The macro TEST takes a single expression. If a test requires multiple
statements then they need to be placed in a function that's called in
the TEST expression.
Remove the overhead of defining and calling single-use functions by
using if_test instead.
Run the tests in the order of definition. We can reorder them like that
because they are independent. Technically this changes the output, but
retains the meaning of a full run and allows for easier review e.g. with
diff option --ignore-all-space.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the documented macro if_test instead of the internal functions
test__run_begin() and test__run_end(), which are supposed to be private
to the unit test framework.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The macro TEST only allows defining a test that consists of a single
expression. Add a new macro, if_test, which provides a way to define
unit tests that are made up of one or more statements.
if_test allows defining self-contained tests en bloc, a bit like
test_expect_success does for regular tests. It acts like a conditional;
the test body is executed if test_skip_all() had not been called before.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Checks outside of tests are caught at runtime and reported like this:
Assertion failed: (ctx.running), function test_assert, file test-lib.c, line 267.
The assert() call aborts the unit test and doesn't reveal the location
or even the type of the offending check, as test_assert() is called by
all of them.
Handle it like the opposite case, a test without any checks: Don't
abort, but report the location of the actual check, along with a message
explaining the situation. The output for example above becomes:
# BUG: check outside of test at t/helper/test-example-tap.c:75
... and the unit test program continues and indicates the error in its
exit code at the end.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the readability of the expected output by using a here-doc for
the test body and replacing the unwieldy ${SQ} references with literal
single quotes.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git var GIT_SHELL_PATH" should report the path to the shell used
to spawn external commands, but it didn't do so on Windows, which
has been corrected.
* js/var-git-shell-path:
var(win32): do report the GIT_SHELL_PATH that is actually used
run-command: declare the `git_shell_path()` function globally
run-command(win32): resolve the path to the Unix shell early
mingw(is_msys2_sh): handle forward slashes in the `sh.exe` path, too
win32: override `fspathcmp()` with a directory separator-aware version
strvec: declare the `strvec_push_nodup()` function globally
run-command: refactor getting the Unix shell path into its own function
What happens when http.cookieFile gets the special value "" has
been clarified in the documentation.
* ps/doc-http-empty-cookiefile:
doc: update http.cookieFile with in-memory cookie processing
"git push '' HEAD:there" used to hit a BUG(); it has been corrected
to die with "fatal: bad repository ''".
* kn/push-empty-fix:
builtin/push: call set_refspecs after validating remote
The http.cookieFile and http.saveCookies configuration variables
have a few values that need to be avoided, which are now ignored
with warning messages.
* jc/http-cookiefile:
http.c: cookie file tightening
The test framework learned to take the test body not as a single
string but as a here-document.
* jk/test-body-in-here-doc:
t/.gitattributes: ignore whitespace in chainlint expect files
t: convert some here-doc test bodies
test-lib: allow test snippets as here-docs
chainlint.pl: add tests for test body in heredoc
chainlint.pl: recognize test bodies defined via heredoc
chainlint.pl: check line numbers in expected output
chainlint.pl: force CRLF conversion when opening input files
chainlint.pl: do not spawn more threads than we have scripts
chainlint.pl: only start threads if jobs > 1
chainlint.pl: add test_expect_success call to test snippets
Tests that use GIT_TEST_SANITIZE_LEAK_LOG feature got their exit
status inverted, which has been corrected.
* rj/test-sanitize-leak-log-fix:
test-lib: GIT_TEST_SANITIZE_LEAK_LOG enabled by default
test-lib: fix GIT_TEST_SANITIZE_LEAK_LOG
When `core.maxTreeDepth` was originally introduced via be20128bfa (add
core.maxTreeDepth config, 2023-08-31), its default value was 4096.
There have since been a couple of updates to its default value that were
not reflected in the documentation for `core.maxTreeDepth`:
- 4d5693ba05 (lower core.maxTreeDepth default to 2048, 2023-08-31)
- b64d78ad02 (max_tree_depth: lower it for MSVC to avoid stack
overflows, 2023-11-01)
Commit 4d5693ba05 lowers the default to 2048 for platforms with smaller
stack sizes, and commit b64d78ad02 lowers the default even further when
Git is compiled with MSVC.
Neither of these changes were reflected in the documentation, which I
noticed while merging newer releases back into GitHub's private fork
(which contained the original implementation of `core.maxTreeDepth`).
Update the documentation to reflect what the platform-specific default
values are.
Noticed-by: Keith W. Campbell <keithc@ca.ibm.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This document contains a few sample config snippets. At least with
Asciidoctor, the section headers are rendered *more* indented than the
variables that follow:
[bitmapPseudoMerge "all"]
pattern = "refs/"
...
To address this, wrap these listings in AsciiDoc listing blocks. Remove
the indentation from the section headings. This is similar to how we
handle such sample config elsewhere, e.g., in config.txt.
While we're here, fix the nearby "wiht" typo.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 852a171018 (am: let command-line options override saved options,
2015-08-04) redirected a few "git am" invocations from /dev/zero, even
though it did not expect "am" to read the input. This was necessary at
the time because those tests used test_terminal, and as described in
18d8c26930 (test_terminal: redirect child process' stdin to a pty,
2015-08-04):
Note that due to the way the code is structured, the child's stdin
pseudo-tty will be closed when we finish reading from our stdin. This
means that in the common case, where our stdin is attached to /dev/null,
the child's stdin pseudo-tty will be closed immediately. Some operations
like isatty(), which git-am uses, require the file descriptor to be
open, and hence if the success of the command depends on such functions,
test_terminal's stdin should be redirected to a source with large amount
of data to ensure that the child's stdin is not closed, e.g.
test_terminal git am --3way </dev/zero
But we later dropped the use of test_terminal in 53ce2e3f0a (am: add
explicit "--retry" option, 2024-06-06). That commit dropped one of the
redirections from /dev/zero but not the other.
In theory the remaining one should not cause any problems, but it turns
out that at least one platform (NonStop) does not have /dev/zero at all.
We never noticed before because it also did not pass the TTY prereq,
meaning these tests were not run at all there until 53ce2e3f0a.
So let's drop the useless /dev/zero mention. There are others in the
test suite, but they are run only for tests marked with EXPENSIVE (so
not typically by default).
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A handful of entries are added to the GitFAQ document.
* bc/gitfaq-more:
doc: mention that proxies must be completely transparent
gitfaq: add entry about syncing working trees
gitfaq: give advice on using eol attribute in gitattributes
gitfaq: add documentation on proxies
The http transport can now be told to send request with
authentication material without first getting a 401 response.
* bc/http-proactive-auth:
http: allow authenticating proactively
A new warning message is issued when a command has to expand a
sparse index to handle working tree cruft that are outside of the
sparse checkout.
* ds/advice-sparse-index-expansion:
advice: warn when sparse index expands
Address-looking strings found on the trailer are now placed on the
Cc: list after running through sanitize_address by "git send-email".
* cb/send-email-sanitize-trailer-addresses:
git-send-email: use sanitized address when reading mbox body
The "ort" merge backend saw one bugfix for a crash that happens
when inner merge gets killed, and assorted code clean-ups.
* en/ort-inner-merge-error-fix:
merge-ort: fix missing early return
merge-ort: convert more error() cases to path_msg()
merge-ort: upon merge abort, only show messages causing the abort
merge-ort: loosen commented requirements
merge-ort: clearer propagation of failure-to-function from merge_submodule
merge-ort: fix type of local 'clean' var in handle_content_merge ()
merge-ort: maintain expected invariant for priv member
merge-ort: extract handling of priv member into reusable function
The paragraph talks about a change made in c8f815c2 (refs: remove
functions without ref store, 2024-05-07), which is v2.46.0-rc0~119^2
and will be published as part of v2.46, not v2.45.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test in reftable library has been rewritten using the unit test
framework.
* cp/unit-test-reftable-record:
t-reftable-record: add tests for reftable_log_record_compare_key()
t-reftable-record: add tests for reftable_ref_record_compare_name()
t-reftable-record: add index tests for reftable_record_is_deletion()
t-reftable-record: add obj tests for reftable_record_is_deletion()
t-reftable-record: add log tests for reftable_record_is_deletion()
t-reftable-record: add ref tests for reftable_record_is_deletion()
t-reftable-record: add comparison tests for obj records
t-reftable-record: add comparison tests for index records
t-reftable-record: add comparison tests for ref records
t-reftable-record: add reftable_record_cmp() tests for log records
t: move reftable/record_test.c to the unit testing framework
"git push" that pushes only deletion gave an unnecessary and
harmless error message when push negotiation is configured, which
has been corrected.
* jc/disable-push-nego-for-deletion:
push: avoid showing false negotiation errors
Custom control structures we invented more recently have been
taught to the clang-format file.
* rs/clang-format-updates:
clang-format: include kh_foreach* macros in ForEachMacros
GitWeb update to use committer date consistently in rss/atom feeds.
* am/gitweb-feed-use-committer-date:
gitweb: rss/atom change published/updated date to committer date
Test suite has been taught not to unnecessarily rely on DNS failing
a bogus external name.
* jk/tests-without-dns:
t/lib-bundle-uri: use local fake bundle URLs
t5551: do not confirm that bogus url cannot be used
t5553: use local url for invalid fetch
An existing test of oidmap API has been rewritten with the
unit-test framework.
* gt/unit-test-oidmap:
t: migrate helper/test-oidmap.c to unit-tests/t-oidmap.c
"git describe --dirty --broken" forgot to refresh the index before
seeing if there is any chang, ("git describe --dirty" correctly did
so), which has been corrected.
* as/describe-broken-refresh-index-fix:
describe: refresh the index when 'broken' flag is used
On Windows, Unix-like paths like `/bin/sh` make very little sense. In
the best case, they simply don't work, in the worst case they are
misinterpreted as absolute paths that are relative to the drive
associated with the current directory.
To that end, Git does not actually use the path `/bin/sh` that is
recorded e.g. when `run_command()` is called with a Unix shell
command-line. Instead, as of 776297548e (Do not use SHELL_PATH from
build system in prepare_shell_cmd on Windows, 2012-04-17), it
re-interprets `/bin/sh` as "look up `sh` on the `PATH` and use the
result instead".
This is the logic users expect to be followed when running `git var
GIT_SHELL_PATH`.
However, when 1e65721227 (var: add support for listing the shell,
2023-06-27) introduced support for `git var GIT_SHELL_PATH`, Windows was
not special-cased as above, which is why it outputs `/bin/sh` even
though that disagrees with what Git actually uses.
Let's fix this by using the exact same logic as `prepare_shell_cmd()`,
adjusting the Windows-specific `git var GIT_SHELL_PATH` test case to
verify that it actually finds a working executable.
Reported-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The intention is to use it in `git var GIT_SHELL_PATH`, therefore we
need this function to stop being file-local only.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 776297548e (Do not use SHELL_PATH from build system in
prepare_shell_cmd on Windows, 2012-04-17), the hard-coded path to the
Unix shell was replaced by passing `sh` instead when executing Unix
shell scripts in Git.
This was done because the hard-coded path to the Unix shell is incorrect
on Windows because it not only is a Unix-style absolute path instead of
a Windows one, but Git uses the runtime prefix feature on Windows, i.e.
the correct path cannot be hard-coded.
Naturally, the `sh` argument will be resolved to the full path of said
executable eventually.
To help fixing the bug where `git var GIT_SHELL_PATH` currently does not
reflect that logic, but shows that incorrect hard-coded Unix-style
absolute path, let's resolve the full path to the `sh` executable early
in the `git_shell_path()` function so that we can use it in `git var`,
too, and be sure that the output is equivalent to what `run_command()`
does when it is asked to execute a command-line using a Unix shell.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whether the full path to the MSYS2 Bash is specified using backslashes
or forward slashes, in either case the command-line arguments need to be
quoted in the MSYS2-specific manner instead of using regular Win32
command-line quoting rules.
In preparation for `prepare_shell_cmd()` to use the full path to
`sh.exe` (with forward slashes for consistency), let's teach the
`is_msys2_sh()` function about this; Otherwise 5580.4 'clone with
backslashed path' would fail once `prepare_shell_cmd()` uses the full
path instead of merely `sh`.
This patch relies on the just-introduced fix where `fspathcmp()` handles
backslashes and forward slashes as equivalent on Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, the backslash is the directory separator, even if the
forward slash can be used, too, at least since Windows NT.
This means that the paths `a/b` and `a\b` are equivalent, and
`fspathcmp()` needs to be made aware of that fact.
Note that we have to override both `fspathcmp()` and `fspathncmp()`, and
the former cannot be a mere pre-processor constant that transforms calls
to `fspathcmp(a, b)` into `fspathncmp(a, b, (size_t)-1)` because the
function `report_collided_checkout()` in `unpack-trees.c` wants to
assign `list.cmp = fspathcmp`.
Also note that `fspatheq()` does _not_ need to be overridden because it
calls `fspathcmp()` internally.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function differs from `strvec_push()` in that it takes ownership of
the allocated string that is passed as second argument.
This is useful when appending elements to the string array that have
been freshly allocated and serve no further other purpose after that.
Without declaring this function globally, call sites would allocate the
memory, only to have `strvec_push()` duplicate the string, and then the
first copy would need to be released. Having this function globally
avoids that kind of unnecessary work.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
