This change affects how 'git cat-file' works with the index when
specifying an object with the ":<path>" syntax (which will give file
contents from the index).
'git cat-file' expands a sparse index to a full index any time contents
are requested from the index by specifying an object with the ":<path>"
syntax. This is true even when the requested file is part of the sparse
index, and results in much slower 'git cat-file' operations when working
within the sparse index.
Mark 'git cat-file' as not needing a full index, so that you only pay
the cost of expanding the sparse index to a full index when you request
a file outside of the sparse index.
Add tests to ensure both that:
- 'git cat-file' returns the correct file contents whether or not the
file is in the sparse index
- 'git cat-file' expands to the full index any time you request
something outside of the sparse index
Signed-off-by: Kevin Lyles <klyles+github@epic.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'run_on_sparse' and 'run_on_all' functions do not work correctly for
commands accepting standard input, because they run the same command
multiple times and the first instance consumes it. This also indirectly
affects 'test_all_match' and 'test_sparse_match'.
To allow these functions to work with commands accepting standard input,
first slurp standard input to a temporary file, and then run the command
with its standard input redirected from the temporary file. This ensures
that each command sees the same contents from its standard input.
Note that this does not impact commands that do not read from standard
input; they continue to ignore it. Additionally, existing uses of the
run_on_* functions do not need to do anything differently, as the
standard input of the test environment is already connected to
/dev/null.
We do not explicitly clean up the input files because they are cleaned
up with the rest of the test repositories and their contents may be
useful for figuring out which command failed when a test case fails.
Signed-off-by: Kevin Lyles <klyles@epic.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the ctype tests to use the new clar unit testing framework.
Introduce a new function `cl_failf()` that allows us to print a
formatted error message, which we can use to point out which of the
characters was classified incorrectly. This results in output like this
on failure:
# start of suite 1: ctype
not ok 1 - ctype::isspace
---
reason: |
Test failed.
0x0d is classified incorrectly: expected 0, got 1
at:
file: 't/unit-tests/ctype.c'
line: 36
function: 'test_ctype__isspace'
---
ok 2 - ctype::isdigit
ok 3 - ctype::isalpha
ok 4 - ctype::isalnum
ok 5 - ctype::is_glob_special
ok 6 - ctype::is_regex_special
ok 7 - ctype::is_pathspec_magic
ok 8 - ctype::isascii
ok 9 - ctype::islower
ok 10 - ctype::isupper
ok 11 - ctype::iscntrl
ok 12 - ctype::ispunct
ok 13 - ctype::isxdigit
ok 14 - ctype::isprint
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the strvec tests to use the new clar unit testing framework.
This is a first test balloon that demonstrates how the testing infra for
clar-based tests looks like.
The tests are part of the "t/unit-tests/bin/unit-tests" binary. When
running that binary with an injected error, it generates TAP output:
# ./t/unit-tests/bin/unit-tests
TAP version 13
# start of suite 1: strvec
ok 1 - strvec::init
ok 2 - strvec::dynamic_init
ok 3 - strvec::clear
not ok 4 - strvec::push
---
reason: |
String mismatch: (&vec)->v[i] != expect[i]
'foo' != 'fo' (at byte 2)
at:
file: 't/unit-tests/strvec.c'
line: 48
function: 'test_strvec__push'
---
ok 5 - strvec::pushf
ok 6 - strvec::pushl
ok 7 - strvec::pushv
ok 8 - strvec::replace_at_head
ok 9 - strvec::replace_at_tail
ok 10 - strvec::replace_in_between
ok 11 - strvec::replace_with_substring
ok 12 - strvec::remove_at_head
ok 13 - strvec::remove_at_tail
ok 14 - strvec::remove_in_between
ok 15 - strvec::pop_empty_array
ok 16 - strvec::pop_non_empty_array
ok 17 - strvec::split_empty_string
ok 18 - strvec::split_single_item
ok 19 - strvec::split_multiple_items
ok 20 - strvec::split_whitespace_only
ok 21 - strvec::split_multiple_consecutive_whitespaces
ok 22 - strvec::detach
1..22
The binary also supports some parameters that allow us to run only a
subset of unit tests or alter the output:
$ ./t/unit-tests/bin/unit-tests -h
Usage: ./t/unit-tests/bin/unit-tests [options]
Options:
-sname Run only the suite with `name` (can go to individual test name)
-iname Include the suite with `name`
-xname Exclude the suite with `name`
-v Increase verbosity (show suite names)
-q Only report tests that had an error
-Q Quit as soon as a test fails
-t Display results in tap format
-l Print suite names
-r[filename] Write summary file (to the optional filename)
Furthermore, running `make unit-tests` runs the binary along with all
the other unit tests we have.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test driver in "unit-test.c" is responsible for setting up our unit
tests and eventually running them. As such, it is also responsible for
parsing the command line arguments.
The clar unit testing framework provides function `clar_test()` that
parses command line arguments and then executes the tests for us. In
theory that would already be sufficient. We have the special requirement
to always generate TAP-formatted output though, so we'd have to always
pass the "-t" argument to clar. Furthermore, some of the options exposed
by clar are ineffective when "-t" is used, but they would still be shown
when the user passes the "-h" parameter to have the clar show its usage.
Implement our own option handling instead of using the one provided by
clar, which gives us greater flexibility in how exactly we set things
up.
We would ideally not use any "normal" code of ours for this such that
the unit testing framework doesn't depend on it working correctly. But
it is somewhat dubious whether we really want to reimplement all of the
option parsing. So for now, let's be pragmatic and reuse it until we
find a good reason in the future why we'd really want to avoid it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wire up the clar unit testing framework by introducing a new
"unit-tests" executable. In contrast to the existing framework, this
will result in a single executable for all test suites. The ability to
pick specific tests to execute is retained via functionality built into
the clar itself.
Note that we need to be a bit careful about how we need to invalidate
our Makefile rules. While we obviously have to regenerate the clar suite
when our test suites change, we also have to invalidate it in case any
of the test suites gets removed. We do so by using our typical pattern
of creating a `GIT-TEST-SUITES` file that gets updated whenever the set
of test suites changes, so that we can easily depend on that file.
Another specialty is that we generate a "clar-decls.h" file. The test
functions are neither static, nor do they have external declarations.
This is because they are getting parsed via "generate.py", which then
creates the external generations that get populated into an array. These
declarations are only seen by the main function though.
The consequence is that we will get a bunch of "missing prototypes"
errors from our compiler for each of these test functions. To fix those
errors, we extract the `extern` declarations from "clar.suite" and put
them into a standalone header that then gets included by each of our
unit tests. This gets rid of compiler warnings for every function which
has been extracted by "generate.py". More importantly though, it does
_not_ get rid of warnings in case a function really isn't being used by
anything. Thus, it would cause a compiler error if a function name was
mistyped and thus not picked up by "generate.py".
The test driver "unit-test.c" is an empty stub for now. It will get
implemented in the next commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `shellapi.h` header was included as of
https://github.com/clar-test/clar/commit/136e763211aa, to have
`SHFileOperation()` declared so that it could be called.
However, https://github.com/clar-test/clar/commit/5ce31b69b525 removed
that call, and therefore that `#include <shellapi.h>` is unnecessary.
It is also unwanted in Git because this project uses a subset of Git for
Windows' SDK in its CI builds that (for bandwidth reasons) excludes tons
of header files, including `shellapi.h`.
So let's remove it.
Note: Since the `windows.h` header would include `shellapi.h` anyway, we
also define `WIN32_LEAN_AND_MEAN` to avoid this and similar other
unnecessary includes before including `windows.h`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When CLAR_FIXTURE_PATH is unset, the `fs_copy()` function seems not to
be used. But it is declared as `static`, and GCC does not like that,
complaining that it should not be declared/defined to begin with.
We could mark this function as (potentially) unused by following the
`MAYBE_UNUSED` pattern from Git's `git-compat-util.h`. However, this is
a GCC-only construct that is not understood by Visual C. Besides, `clar`
does not use that pattern at all.
Instead, let's use the `((void)SYMBOL);` pattern that `clar` already
uses elsewhere; This avoids the compile error by sorta kinda make the
function used after a fashion.
Note: GCC 14.x (which Git for Windows' SDK already uses) is able to
figure out that this function is unused even though there are recursive
calls between `fs_copy()` and `fs_copydir_helper()`; Earlier GCC
versions do not detect that, and therefore the issue has been hidden
from the regular Linux CI builds (where GCC 14.x is not yet used). That
is the reason why this change is only made in the Windows-specific
portion of `t/unit-tests/clar/clar/fs.h`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using mingw-w64 to compile the code, and using `_stat()`, it is
necessary to use `struct _stat`, too, and not `struct stat` (as the
latter is incompatible with the "dashed" version because it is limited
to 32-bit time types for backwards compatibility).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The NonStop platform does not have `mkdtemp()` available, which we rely
on in `build_sandbox_path()`. Fix this issue by using `mktemp()` and
`mkdir()` instead on this platform.
This has been cherry-picked from the upstream pull request at [1].
[1]: https://github.com/clar-test/clar/pull/96
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our unit testing framework is a homegrown solution. While it supports
most of our needs, it is likely that the volume of unit tests will grow
quite a bit in the future such that we can exercise low-level subsystems
directly. This surfaces several shortcomings that the current solution
has:
- There is no way to run only one specific tests. While some of our
unit tests wire this up manually, others don't. In general, it
requires quite a bit of boilerplate to get this set up correctly.
- Failures do not cause a test to stop execution directly. Instead,
the test author needs to return manually whenever an assertion
fails. This is rather verbose and is not done correctly in most of
our unit tests.
- Wiring up a new testcase requires both implementing the test
function and calling it in the respective test suite's main
function, which is creating code duplication.
We can of course fix all of these issues ourselves, but that feels
rather pointless when there are already so many unit testing frameworks
out there that have those features.
We line out some requirements for any unit testing framework in
"Documentation/technical/unit-tests.txt". The "clar" unit testing
framework, which isn't listed in that table yet, ticks many of the
boxes:
- It is licensed under ISC, which is compatible.
- It is easily vendorable because it is rather tiny at around 1200
lines of code.
- It is easily hackable due to the same reason.
- It has TAP support.
- It has skippable tests.
- It preprocesses test files in order to extract test functions, which
then get wired up automatically.
While it's not perfect, the fact that clar originates from the libgit2
project means that it should be rather easy for us to collaborate with
upstream to plug any gaps.
Import the clar unit testing framework at commit 1516124 (Merge pull
request #97 from pks-t/pks-whitespace-fixes, 2024-08-15). The framework
will be wired up in subsequent commits.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the prove target, we append GIT_TEST_OPTS to the arguments
that we execute each of the tests with. This doesn't only include the
intended test scripts, but also ends up passing the arguments to our
unit tests. This is unintentional though as they do not even know to
interpret those arguments, and is inconsistent with how we execute unit
tests without prove.
This isn't much of an issue because our current set of unit tests mostly
ignore their arguments anyway. With the introduction of clar-based unit
tests this is about to become an issue though, as these do parse their
command line argument to alter behaviour.
Prepare for this by passing GIT_TEST_OPTS to "run-test.sh" via an
environment variable. Like this, we can conditionally forward it to our
test scripts, only.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--auto` flag for git-pack-refs(1) allows the ref backend to decide
whether or not a repack is in order. This switch has been introduced
mostly with the "reftable" backend in mind, which already knows to
auto-compact its tables during normal operations. When the flag is set,
then it will use the same auto-compaction mechanism and thus end up
doing nothing in most cases.
The "files" backend does not have any such heuristic yet and instead
packs any loose references unconditionally. So we rewrite the complete
"packed-refs" file even if there's only a single loose reference to be
packed.
Even worse, starting with 9f6714ab3e (builtin/gc: pack refs when using
`git maintenance run --auto`, 2024-03-25), `git pack-refs --auto` is
unconditionally executed via our auto maintenance, so we end up repacking
references every single time auto maintenance kicks in. And while that
commit already mentioned that the "files" backend unconditionally packs
refs now, the author obviously didn't quite think about the consequences
thereof. So while the idea was sound, we really should have added a
heuristic to the "files" backend before implementing it.
Introduce a heuristic that decides whether or not it is worth to pack
loose references. The important factors to decide here are the number of
loose references in comparison to the overall size of the "packed-refs"
file. The bigger the "packed-refs" file, the longer it takes to rewrite
it and thus we scale up the limit of allowed loose references before we
repack.
As is the nature of heuristics, this mechansim isn't obviously
"correct", but should rather be seen as a tradeoff between how much
resources we spend packing refs and how inefficient the ref store
becomes. For all I can say, we have successfully been using the exact
same heuristic in Gitaly for several years by now.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have two tests in t0601 which exercise the same underlying logic,
once via `git pack-refs --auto` and once via `git maintenance run
--auto`. Merge these two tests into one such that it becomes easier to
extend test coverage for both commands at the same time.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was reported that git-verify-pack(1) has started to crash with Git
v2.46.0 when run outside of a repository. This is another fallout from
c8aed5e8da (repository: stop setting SHA1 as the default object hash,
2024-05-07), where we have stopped setting the default hash algorithm
for `the_repository`. Consequently, code that relies on `the_hash_algo`
will now crash when it hasn't explicitly been initialized, which may be
the case when running outside of a Git repository.
The crash is not in git-verify-pack(1) but instead in git-index-pack(1),
which gets called by the former. Ideally, both of these programs should
be able to identify the hash algorithm used by the packfile and index
without having to rely on external information. But unfortunately, the
format for neither of them is completely self-describing, so it is not
possible to derive that information. This is a design issue that we
should address by introducing a new packfile version that encodes its
object hash.
For now though the more important fix is to not make either of these
programs crash anymore, which we do by falling back to SHA1 when the
object hash is unconfigured. This pessimizes reading packfiles which
use a different hash than SHA1, but restores previous behaviour.
Reported-by: Ilya K <me@0upti.me>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If "git rebase" fails to start after stashing the user's uncommitted
changes then it forgets to restore the stashed changes and remove the
state directory. To make matters worse, running "git rebase --abort" to
apply the stashed changes and cleanup the state directory fails because
the state directory only contains the "autostash" file and is missing
the "head-name" and "onto" files required by read_basic_state().
Fix this by applying the autostash and removing the state directory if
the pre-rebase hook or initial checkout fail. This matches what
finish_rebase() does at the end of a successful rebase. If the user
modifies any files after the autostash is created it is possible there
will be conflicts when the autostash is applied. In that case
apply_autostash() saves the stash in a new entry under refs/stash and so
it is safe to remove the state directory containing the autostash file.
New tests are added to check the autostash is applied and the state
directory is removed if the rebase fails to start. Checks are also added
to some existing tests in order to ensure there is no state directory
left behind when a rebase fails to start and no autostash has been
created.
Reported-by: Brian Lyles <brianmlyles@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
helper/test-oid-array.c along with t0064-oid-array.sh test the
oid-array.h API, which provides storage and processing
efficiency over large lists of object identifiers.
Migrate them to the unit testing framework for better runtime
performance and efficiency. As we don't initialize a repository
in these tests, the hash algo that functions like oid_array_lookup()
use is not initialized, therefore call repo_set_hash_algo() to
initialize it. And init_hash_algo():lib-oid.c can aid in this
process, so make it public.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Ghanshyam Thakkar <shyamthakkar001@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The underlying machinery for "git diff-index" has long been made to
expand the sparse index as needed, but the command fully expanded
the sparse index upfront, which now has been taught not to do.
* ds/sparse-diff-index:
diff-index: integrate with the sparse index
Another test for reftable library ported to the unit test framework.
* cp/unit-test-reftable-block:
t-reftable-block: mark unused argv/argc
t-reftable-block: add tests for index blocks
t-reftable-block: add tests for obj blocks
t-reftable-block: add tests for log blocks
t-reftable-block: remove unnecessary variable 'j'
t-reftable-block: use xstrfmt() instead of xstrdup()
t-reftable-block: use block_iter_reset() instead of block_iter_close()
t-reftable-block: use reftable_record_key() instead of strbuf_addstr()
t-reftable-block: use reftable_record_equal() instead of check_str()
t-reftable-block: release used block reader
t: harmonize t-reftable-block.c with coding guidelines
t: move reftable/block_test.c to the unit testing framework
The code in the reftable library has been cleaned up by discarding
unused "generic" interface.
* ps/reftable-drop-generic:
reftable: mark unused parameters in empty iterator functions
reftable/generic: drop interface
t/helper: refactor to not use `struct reftable_table`
t/helper: use `hash_to_hex_algop()` to print hashes
t/helper: inline printing of reftable records
t/helper: inline `reftable_table_print()`
t/helper: inline `reftable_stack_print_directory()`
t/helper: inline `reftable_reader_print_file()`
t/helper: inline `reftable_dump_main()`
reftable/dump: drop unused `compact_stack()`
reftable/generic: move generic iterator code into iterator interface
reftable/iter: drop double-checking logic
reftable/stack: open-code reading refs
reftable/merged: stop using generic tables in the merged table
reftable/merged: rename `reftable_new_merged_table()`
reftable/merged: expose functions to initialize iterators
This is conceptually the same as the cases in df9d638c24 (unit-tests:
ignore unused argc/argv, 2024-08-17), but this unit test was migrated
from the reftable tests in a parallel branch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This spot was originally marked in in 4695c3f3a9 (reftable: mark unused
parameters in virtual functions, 2024-08-17), but was copied in
5b539a5361 (t: move reftable/readwrite_test.c to the unit testing
framework, 2024-08-13).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases, a user may be generating a patch for an old commit which
now has an out-of-date author or other identity. For example, consider a
team member who contributes to an internal fork of an upstream project,
but leaves before this change is submitted upstream.
In this case, the team members company address may no longer be valid,
and will thus bounce when sending email.
This can be manually avoided by editing the generated patch files, or by
carefully using --suppress-<cc|to> options. This requires a lot of
manual intervention and is easy to forget.
Git has support for mapping old email addresses and names to a canonical
name and address via the .mailmap file (and its associated mailmap.file,
mailmap.blob, and log.mailmap options).
Teach git send-email to enable mailmap support for all addresses. This
ensures that addresses point to the canonical real name and email
address.
Add the sendemail.mailmap configuration option and its associated
--mailmap (and --use-mailmap for compatibility with git log) options.
For now, the default behavior is to disable the mailmap in order to
avoid any surprises or breaking any existing setups.
These options support per-identity configuration via the
sendemail.identity configuration blocks. This enables identity-specific
configuration in cases where users may not want to enable support.
In addition, support send-email specific mailmap data via
sendemail.mailmap.file, sendemail.mailmap.blob and their
identity-specific variants.
The intention of these options is to enable mapping addresses which are
no longer valid to a current project or team maintainer. Such mappings
may change the actual person being referred to, and may not make sense
in a traditional mailmap file which is intended for updating canonical
name and address for the same individual.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git check-mailmap splits each provided contact using split_ident_line.
This function requires that the contact either be of the form "Name
<user@host>" or of the form "<user@host>". In particular, if the mail
portion of the contact is not surrounded by angle brackets,
split_ident_line will reject it.
This results in git check-mailmap rejecting attempts to translate simple
email addresses:
$ git check-mailmap user@host
fatal: unable to parse contact: user@host
This limits the usability of check-mailmap as it requires placing angle
brackets around plain email addresses.
In particular, attempting to use git check-mailmap to support mapping
addresses in git send-email is not straight forward. The sanitization
and validation functions in git send-email strip angle brackets from
plain email addresses. It is not trivial to add brackets prior to
invoking git check-mailmap.
Instead, modify check_mailmap() to allow such strings as contacts. In
particular, treat any line which cannot be split by split_ident_line as
a simple email address.
No attempt is made to actually parse the address line, or validate that
it is actually an email address. Implementing such validation is not
trivial. Besides, we weren't validating the address between angle
brackets before anyways.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reusing chunks verbatim from an existing source pack, the function
write_reused_pack() first attempts to reuse whole words (via the
function `write_reused_pack_verbatim()`), and then individual bits (via
`write_reused_pack_one()`).
In the non-MIDX case, all of this code works fine. Likewise, in the MIDX
case, processing bits individually from the first (preferred) pack works
fine. However, processing subsequent packs in the MIDX case is broken
when there are duplicate objects among the set of MIDX'd packs.
This is because we treat the individual bit positions as valid pack
positions within the source pack(s), which does not account for gaps in
the source pack, like we see when the MIDX must break ties between
duplicate objects which appear in multiple packs.
The broken code looks like:
for (; i < reuse_packfile_bitmap->word_alloc; i++) {
for (offset = 0; offset < BITS_IN_EWORD, offset++) {
/* ... */
write_reused_pack_one(reuse_packfile->p,
pos + offset - reuse_packfile->bitmap_pos,
f, pack_start, &w_curs);
}
}
, where the second argument is incorrect and does not account for gaps.
Instead, make sure that we translate bit positions in the MIDX's
pseudo-pack order to pack positions in the respective source packs by:
- Translating the bit position (pseudo-pack order) to a MIDX position
(lexical order).
- Use the MIDX position to obtain the offset at which the given object
occurs in the source pack.
- Then translate that offset back into a pack relative position within
the source pack by calling offset_to_pack_pos().
After doing this, then we can safely use the result as a pack position.
Note that when doing single-pack reuse, as well as reusing objects from
the MIDX's preferred pack, such translation is not necessary, since
either ties are broken in favor of the preferred pack, or there are no
ties to break at all (in the case of non-MIDX bitmaps).
Failing to do this can result in strange failure modes. One example that
can occur when misinterpreting bits in the above fashion is that Git
thinks it's supposed to send a delta that the caller does not want.
Under this (incorrect) assumption, we try to look up the delta's base
(so that we can patch any OFS_DELTAs if necessary). We do this using
find_reused_offset().
But if we try and call that function for an offset belonging to an
object we did not send, we'll get back garbage. This can result in us
computing a negative fixup value, which results in memory corruption
when trying to write the (patched) OFS_DELTA header.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In our tests for multi-pack reuse, we have two helper functions:
- test_pack_objects_reused_all(), and
- test_pack_objects_reused()
which invoke pack-objects (either with `--all`, or the supplied tips via
stdin, respectively) and ensure that (a) the number of reused objects,
and (b) the number of packs which those objects were reused from both
match the expected values.
Both functions discard the output of pack-objects and assert only on the
contents of the trace2 stream.
However, if we store the pack and attempt to index it with `--strict`,
we find that a number of our tests are broken, indicating a bug within
multi-pack reuse.
That bug will be addressed in a subsequent commit. But let's first
harden these tests by trying to index the resulting pack, marking the
tests which fail appropriately.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git for-each-ref' learned a new "--format" atom to find the branch
that the history leading to a given commit "%(is-base:<commit>)" is
likely based on.
* ds/for-each-ref-is-base:
p1500: add is-base performance tests
for-each-ref: add 'is-base' token
commit: add gentle reference lookup method
commit-reach: add get_branch_base_for_tip
"git send-email" learned "--translate-aliases" option that reads
addresses from the standard input and emits the result of applying
aliases on them to the standard output.
* jk/send-email-translate-aliases:
send-email: teach git send-email option to translate aliases
t9001-send-email.sh: update alias list used for pine test
t9001-send-email.sh: fix quoting for mailrc --dump-aliases test
Mark unused parameters as UNUSED to squelch -Wunused warnings.
* jk/mark-unused-parameters:
t-hashmap: stop calling setup() for t_intern() test
scalar: mark unused parameters in dummy function
daemon: mark unused parameters in non-posix fallbacks
setup: mark unused parameter in config callback
test-mergesort: mark unused parameters in trivial callback
t-hashmap: mark unused parameters in callback function
reftable: mark unused parameters in virtual functions
reftable: drop obsolete test function declarations
reftable: ignore unused argc/argv in test functions
unit-tests: ignore unused argc/argv
t/helper: mark more unused argv/argc arguments
oss-fuzz: mark unused argv/argc argument
refs: mark unused parameters in do_for_each_reflog_helper()
refs: mark unused parameters in ref_store fsck callbacks
update-ref: mark more unused parameters in parser callbacks
imap-send: mark unused parameter in ssl_socket_connect() fallback
We created a useless pseudo-merge reachability bitmap that is about
0 commits, and attempted to include commits that are not in packs,
which made no sense. These bugs have been corrected.
* tb/pseudo-merge-bitmap-fixes:
pseudo-merge.c: ensure pseudo-merge groups are closed
pseudo-merge.c: do not generate empty pseudo-merge commits
t/t5333-pseudo-merge-bitmaps.sh: demonstrate empty pseudo-merge groups
pack-bitmap-write.c: select pseudo-merges even for small bitmaps
pack-bitmap: drop redundant args from `bitmap_writer_finish()`
pack-bitmap: drop redundant args from `bitmap_writer_build()`
pack-bitmap: drop redundant args from `bitmap_writer_build_type_index()`
pack-bitmap: initialize `bitmap_writer_init()` with packing_data
A tests for "git maintenance" that were broken on Windows have been
corrected.
* ps/maintenance-detach-fix-more:
builtin/maintenance: fix loose objects task emitting pack hash
t7900: exercise detaching via trace2 regions
t7900: fix flaky test due to leaking background job
Maintenance tasks other than "gc" now properly go background when
"git maintenance" runs them.
* ps/maintenance-detach-fix:
run-command: fix detaching when running auto maintenance
builtin/maintenance: add a `--detach` flag
builtin/gc: add a `--detach` flag
builtin/gc: stop processing log file on signal
builtin/gc: fix leaking config values
builtin/gc: refactor to read config into structure
config: fix constness of out parameter for `git_config_get_expiry()`
"git rev-list ... | git diff-tree -p --remerge-diff --stdin" should
behave more or less like "git log -p --remerge-diff" but instead it
crashed, forgetting to prepare a temporary object store needed.
* xx/diff-tree-remerge-diff-fix:
diff-tree: fix crash when used with --remerge-diff
A flakey test and incorrect calls to strtoX() functions have been
fixed.
* kl/test-fixes:
t6421: fix test to work when repo dir contains d0
set errno=0 before strtoX calls
"git config --value=foo --fixed-value section.key newvalue" barfed
when the existing value in the configuration file used the
valueless true syntax, which has been corrected.
* tb/config-fixed-value-with-valueless-true:
config.c: avoid segfault with --fixed-value and valueless config
A recent update broke "git ls-remote" used outside a repository,
which has been corrected.
* ps/ls-remote-out-of-repo-fix:
builtin/ls-remote: fall back to SHA1 outside of a repo
The default object hash and ref backend format used to be settable
only with explicit command line option to "git init" and
environment variables, but now they can be configured in the user's
global and system wide configuration.
* ps/hash-and-ref-format-from-config:
setup: make ref storage format configurable via config
setup: make object format configurable via config
setup: merge configuration of repository formats
t0001: delete repositories when object format tests finish
t0001: exercise initialization with ref formats more thoroughly
* cp/unit-test-reftable-readwrite:
t-reftable-readwrite: add test for known error
t-reftable-readwrite: use 'for' in place of infinite 'while' loops
t-reftable-readwrite: use free_names() instead of a for loop
t: move reftable/readwrite_test.c to the unit testing framework
Use of API functions that implicitly depend on the_repository
object in the config subsystem has been rewritten to pass a
repository object through the callchain.
* ps/config-wo-the-repository:
config: hide functions using `the_repository` by default
global: prepare for hiding away repo-less config functions
config: don't depend on `the_repository` with branch conditions
config: don't have setters depend on `the_repository`
config: pass repo to functions that rename or copy sections
config: pass repo to `git_die_config()`
config: pass repo to `git_config_get_expiry_in_days()`
config: pass repo to `git_config_get_expiry()`
config: pass repo to `git_config_get_max_percent_split_change()`
config: pass repo to `git_config_get_split_index()`
config: pass repo to `git_config_get_index_threads()`
config: expose `repo_config_clear()`
config: introduce missing setters that take repo as parameter
path: hide functions using `the_repository` by default
path: stop relying on `the_repository` in `worktree_git_path()`
path: stop relying on `the_repository` when reporting garbage
hooks: remove implicit dependency on `the_repository`
editor: do not rely on `the_repository` for interactive edits
path: expose `do_git_common_path()` as `repo_common_pathv()`
path: expose `do_git_path()` as `repo_git_pathv()`
