git rebase keeps a list that maps the OID of each commit before it was
rebased to the OID of the equivalent commit after the rebase. This list
is used to drive the "post-rewrite" hook that is called at the end of a
successful rebase. When a rebase stops for the user to resolve merge
conflicts the OID of the commit being picked is written to
".git/rebase-merge/stopped-sha". Then when the rebase is continued that
OID is added to the list of rewritten commits. Unfortunately if a commit
cannot be picked because it would overwrite an untracked file we still
write the "stopped-sha1" file. This means that when the rebase is
continued the commit is added into the list of rewritten commits even
though it has not been picked yet.
Fix this by not calling error_with_patch() for failed commands. The pick
has failed so there is nothing to commit and therefore we do not want to
set up the state files for committing staged changes when the rebase
continues. This change means we no-longer write a patch for the failed
command or display the error message printed by error_with_patch(). As
the command has failed the patch isn't really useful and in any case the
user can inspect the commit associated with the failed command by
inspecting REBASE_HEAD. Unless the user has disabled it we already print
an advice message that is more helpful than the message from
error_with_patch() which the user will still see. Even if the advice is
disabled the user will see the messages from the merge machinery
detailing the problem.
The code to add a failed command back into the todo list is duplicated
between pick_one_commit() and the loop in pick_commits(). Both sites
print advice about the command being rescheduled, decrement the current
item and save the todo list. To avoid duplicating this code
pick_one_commit() is modified to set a flag to indicate that the command
should be rescheduled in the main loop. This simplifies things as only
the remaining copy of the code needs to be modified to set REBASE_HEAD
rather than calling error_with_patch().
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the next commit. If a pick fails we now return the error
at the end of the loop body rather than returning early, a successful
"edit" command continues to return early. There are three things to
check to ensure that removing the early return for an error does not
change the behavior of the code:
(1) We could enter the block guarded by "if (reschedule)". This block
is not entered because "reschedlue" is always zero when picking a
commit.
(2) We could enter the block guarded by
"else if (is_rebase_i(opts) && check_todo && !res)". This block is
not entered when returning an error because "res" is non-zero in
that case.
(3) todo_list->current could be incremented before returning. That is
avoided by moving the increment which is of course a potential
change in behavior itself. The move is safe because none of the
callers look at todo_list after this function returns. Moving the
increment makes it clear we only want to advance the current item
if the command was successful.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than constructing the path in a struct strbuf use the ready
made function to get the path name instead. This was the last
remaining use of the strbuf so remove it as well.
As with the previous patch we now use a hard coded string rather than
git_dir() when constructing the path. This is safe for the same
reason (make_patch() is only called when rebasing) and is protected by
the assertion added in the previous patch.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a rebase stops for the user to resolve conflicts it writes a patch
for the conflicting commit to .git/rebase-merge/patch. This file has
been written since the introduction of "git-rebase-interactive.sh" in
1b1dce4bae (Teach rebase an interactive mode, 2007-06-25). I assume the
idea was to enable the user inspect the conflicting commit in the same
way as they could for the patch based rebase. This file should be
deleted when the rebase continues as if the rebase stops for a failed
"exec" command or a "break" command it is confusing to the user if there
is a stale patch lying around from an unrelated command. As the path is
now used in two different places rebase_path_patch() is added and used
to obtain the path for the patch.
To construct the path write_patch() previously used get_dir() which
returns different paths depending on whether we're rebasing or
cherry-picking/reverting. As this function is only called when
rebasing it is safe to use a hard coded string for the directory
instead. An assertion is added to make sure we don't starting calling
this function when cherry-picking in the future.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the start of each iteration the loop that picks commits removes the
state files from the previous pick. However some of these files are only
written if there are conflicts in which case we exit the loop before the
end of the loop body. Therefore they only need to be removed when the
rebase continues, not at the start of each iteration.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --local" stops copying from an original repository that
has symbolic links inside its $GIT_DIR; an error message when that
happens has been updated.
* gc/better-error-when-local-clone-fails-with-symlink:
clone: error specifically with --local and symlinked objects
Code clean-up to replace a hardcoded constant with a CPP macro.
* rs/get-tar-commit-id-use-defined-const:
get-tar-commit-id: use TYPEFLAG_GLOBAL_HEADER instead of magic value
The approxidate() API has been simplified by losing an extra
function that did the same thing as another one.
* rs/remove-approxidate-relative:
date: remove approxidate_relative()
The userdiff regexp patterns for various filetypes that are built
into the system have been updated to avoid triggering regexp errors
from UTF-8 aware regex engines.
* rs/userdiff-multibyte-regex:
userdiff: support regexec(3) with multi-byte support
Clean-up of the code path that deals with merge strategy option
handling in "git rebase".
* pw/rebase-cleanup-merge-strategy-option-handling:
rebase: remove a couple of redundant strategy tests
rebase -m: fix serialization of strategy options
rebase -m: cleanup --strategy-option handling
sequencer: use struct strvec to store merge strategy options
rebase: stop reading and writing unnecessary strategy state
"git branch -d origin/master" would say "no such branch", but it is
likely a missed "-r" if refs/remotes/origin/master exists. The
command has been taught to give such a hint in its error message.
* cm/branch-delete-error-message-update:
branch: improve error log on branch not found by checking remotes refs
"git mergetool" and "git difftool" learns a new configuration
guiDefault to optionally favor configured guitool over non-gui-tool
automatically when $DISPLAY is set.
* tk/mergetool-gui-default-config:
mergetool: new config guiDefault supports auto-toggling gui by DISPLAY
Tests had a few places where we ignored PERL_PATH and blindly used
/usr/bin/perl, which have been corrected.
* jk/use-perl-path-consistently:
t/lib-httpd: pass PERL_PATH to CGI scripts
"git clone" from an empty repository learned to propagate the
choice of the hash algorithm from the source repository to the
newly created repository.
* jc/clone-object-format-from-void:
clone: propagate object-format when cloning from void
Consistently spell "Message-ID" as such, not "Message-Id".
* jc/spell-id-in-both-caps-in-message-id:
e-mail workflow: Message-ID is spelled with ID in both capital letters
"git sparse-checkout" command learns a debugging aid for the sparse
rule definitions.
* ws/sparse-check-rules:
builtin/sparse-checkout: add check-rules command
builtin/sparse-checkout: remove NEED_WORK_TREE flag
6f054f9fb3 (builtin/clone.c: disallow --local clones with
symlinks, 2022-07-28) gives a good error message when "git clone
--local" fails when the repo to clone has symlinks in
"$GIT_DIR/objects". In bffc762f87 (dir-iterator: prevent top-level
symlinks without FOLLOW_SYMLINKS, 2023-01-24), we later extended this
restriction to the case where "$GIT_DIR/objects" is itself a symlink,
but we didn't update the error message then - bffc762f87's tests show
that we print a generic "failed to start iterator over" message.
This is exacerbated by the fact that Documentation/git-clone.txt
mentions neither restriction, so users are left wondering if this is
intentional behavior or not.
Fix this by adding a check to builtin/clone.c: when doing a local clone,
perform an extra check to see if "$GIT_DIR/objects" is a symlink, and if
so, assume that that was the reason for the failure and report the
relevant information. Ideally, dir_iterator_begin() would tell us that
the real failure reason is the presence of the symlink, but (as far as I
can tell) there isn't an appropriate errno value for that.
Also, update Documentation/git-clone.txt to reflect that this
restriction exists.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test 'loosely defined local base branch is reported correctly' in
t2024-checkout-dwim.sh, which was introduced in [1] compares output of
two invocations of "git checkout", invoked with two different branches
named "strict" and "loose". As per description in [1], the test is
validating that output of tracking information for these two branches.
This tracking information is printed to standard output:
Your branch is behind 'main' by 1 commit, and can be fast-forwarded.
(use "git pull" to update your local branch)
The test assumes that the names of the two branches (strict and loose)
are in that output, and pipes the output through sed to replace names of
the branches with "BRANCHNAME". Command "git checkout", however,
outputs the branch name to standard error, not standard output -- see
message "Switched to branch '%s'\n" in function "update_refs_for_switch"
in "builtin/checkout.c". This means that the two invocations of sed do
nothing.
Redirect both the standard output and the standard error of "git
checkout" for these assertions. Ensure that compared files have the
string "BRANCHNAME".
In a series of piped commands, only the return code of the last command
is used. Thus, all other commands will have their return codes masked.
Avoid piping of output of git directly into sed to preserve the exit
status code of "git checkout", while we're here.
[1] 05e73682cd (checkout: report upstream correctly even with loosely
defined branch.*.merge, 2014-10-14)
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a test in t3402 that has been redundant ever since 80ff47957b
(rebase: remember strategy and strategy options, 2011-02-06). That
commit added a new test, the first part of which (as noted in the old
commit message) duplicated an existing test.
Also remove a test t3418 that has been redundant since the merge backend
was removed in 68aa495b59 (rebase: implement --merge via the interactive
machinery, 2018-12-11), since it now tests the same code paths as the
preceding test.
Helped-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To store the strategy options rebase prepends " --" to each one and
writes them to a file. To load them it reads the file and passes the
contents to split_cmdline(). This roughly mimics the behavior of the
scripted rebase but has a couple of limitations, (1) options containing
whitespace are not properly preserved (this is true of the scripted
rebase as well) and (2) options containing '"' or '\' are incorrectly
parsed and may cause the parser to return an error.
Fix these limitations by quoting each option when they are stored so
that they can be parsed correctly. Now that "--preserve-merges" no
longer exist this change also stops prepending "--" to the options when
they are stored as that was an artifact of the scripted rebase.
These changes are backwards compatible so the files written by an older
version of git can still be read. They are also forwards compatible,
the file can still be parsed by recent versions of git as they treat the
"--" prefix as optional.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When handling "--strategy-option" rebase collects the commands into a
struct string_list, then concatenates them into a string, prepending "--"
to each one before splitting the string and removing the "--" prefix.
This is an artifact of the scripted rebase and the need to support
"rebase --preserve-merges". Now that "--preserve-merges" no-longer
exists we can cleanup the way the argument is handled.
The tests for a bad strategy option are adjusted now that
parse_strategy_opts() is no-longer called when starting a rebase. The
fact that it only errors out when running "git rebase --continue" is a
mixed blessing but the next commit will fix the root cause of the
parsing problem so lets not worry about that here.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sequencer stores the merge strategy options in an array of strings
which allocated with ALLOC_GROW(). Using "struct strvec" avoids manually
managing the memory of that array and simplifies the code.
Aside from memory allocation the changes to the sequencer are largely
mechanical, changing xopts_nr to xopts.nr and xopts[i] to xopts.v[i]. A
new option parsing macro OPT_STRVEC() is also added to collect the
strategy options. Hopefully this can be used to simplify the code in
builtin/merge.c in the future.
Note that there is a change of behavior to "git cherry-pick" and "git
revert" as passing “--no-strategy-option” will now clear any previous
strategy options whereas before this change it did nothing.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The state files for "--strategy" and "--strategy-option" are written and
read twice, once by builtin/rebase.c and then by sequencer.c. This is an
artifact of the scripted rebase and the need to support "rebase
--preserve-merges". Now that "--preserve-merges" no-longer exists we
only need to read and write these files in sequencer.c. This enables us
to remove a call to free() in read_strategy_opts() that was added by
f1f4ebf432 (sequencer.c: fix "opts->strategy" leak in
read_strategy_opts(), 2022-11-08) as this commit fixes the root cause of
that leak.
There is further scope for removing duplication in the reading and
writing of state files between builtin/rebase.c and sequencer.c but that
is left for a follow up series.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the same macro in the archive reader code as on the writer side in
archive-tar.c to document the connection.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 29f4332e66 (Quit passing 'now' to date code, 2019-09-11) removed
its timeval parameter, approxidate_relative() became equivalent to
approxidate(). Convert its last two call sites and remove the redundant
function.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Emily finally figured out how to set up their alias at DayJob, and would
prefer to use nasamuffin@google.com, partially to reduce confusion
between IRC and list, and partially because they just like the alias a
lot more.
Signed-off-by: Emily Shaffer <nasamuffin@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1819ad327b (grep: fix multibyte regex handling under macOS,
2022-08-26) we use the system library for all regular expression
matching on macOS, not just for git grep. It supports multi-byte
strings and rejects invalid multi-byte characters.
This broke all built-in userdiff word regexes in UTF-8 locales because
they all include such invalid bytes in expressions that are intended to
match multi-byte characters without explicit support for that from the
regex engine.
"|[^[:space:]]|[\xc0-\xff][\x80-\xbf]+" is added to all built-in word
regexes to match a single non-space or multi-byte character. The \xNN
characters are invalid if interpreted as UTF-8 because they have their
high bit set, which indicates they are part of a multi-byte character,
but they are surrounded by single-byte characters.
Replace that expression with "|[^[:space:]]" if the regex engine
supports multi-byte matching, as there is no need to have an explicit
range for multi-byte characters then. Check for that capability at
runtime, because it depends on the locale and thus on environment
variables. Construct the full replacement expression at build time
and just switch it in if necessary to avoid string manipulation and
allocations at runtime.
Additionally the word regex for tex contains the expression
"[a-zA-Z0-9\x80-\xff]+" with a similarly invalid range. The best
replacement with only valid characters that I can come up with is
"([a-zA-Z0-9]|[^\x01-\x7f])+". Unlike the original it matches NUL
characters, though. Assuming that tex files usually don't contain NUL
this should be acceptable.
Reported-by: D. Ben Knoble <ben.knoble@gmail.com>
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch --all" does not have to download and handle the same
bundleURI over and over, which has been corrected.
* ds/fetch-bundle-uri-with-all:
fetch: download bundles once, even with --all
Test framework fix.
* jk/chainlint-fixes:
tests: skip test_eval_ in internal chain-lint
tests: drop here-doc check from internal chain-linter
tests: diagnose unclosed here-doc in chainlint.pl
tests: replace chainlint subshell with a function
tests: run internal chain-linter under "make test"
Split key function and data structure definitions out of cache.h to
new header files and adjust the users.
* en/header-split-cleanup:
csum-file.h: remove unnecessary inclusion of cache.h
write-or-die.h: move declarations for write-or-die.c functions from cache.h
treewide: remove cache.h inclusion due to setup.h changes
setup.h: move declarations for setup.c functions from cache.h
treewide: remove cache.h inclusion due to environment.h changes
environment.h: move declarations for environment.c functions from cache.h
treewide: remove unnecessary includes of cache.h
wrapper.h: move declarations for wrapper.c functions from cache.h
path.h: move function declarations for path.c functions from cache.h
cache.h: remove expand_user_path()
abspath.h: move absolute path functions from cache.h
environment: move comment_line_char from cache.h
treewide: remove unnecessary cache.h inclusion from several sources
treewide: remove unnecessary inclusion of gettext.h
treewide: be explicit about dependence on gettext.h
treewide: remove unnecessary cache.h inclusion from a few headers
Code clean-up around the use of the_repository.
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
Add a few configuration variables to tell the cURL library that
different types of ssl-cert and ssl-key are in use.
* sm/ssl-key-type-config:
http: add support for different sslcert and sslkey types.
Assorted config API updates.
* ab/config-multi-and-nonbool:
for-each-repo: with bad config, don't conflate <path> and <cmd>
config API: add "string" version of *_value_multi(), fix segfaults
config API users: test for *_get_value_multi() segfaults
for-each-repo: error on bad --config
config API: have *_multi() return an "int" and take a "dest"
versioncmp.c: refactor config reading next commit
config API: add and use a "git_config_get()" family of functions
config tests: add "NULL" tests for *_get_value_multi()
config tests: cover blind spots in git_die_config() tests
Clean-up of the code path that reports what "git fetch" did to each
ref.
* ps/fetch-ref-update-reporting:
fetch: centralize printing of reference updates
fetch: centralize logic to print remote URL
fetch: centralize handling of per-reference format
fetch: pass the full local reference name to `format_display`
fetch: move output format into `display_state`
fetch: move reference width calculation into `display_state`
Code clean-up for "-Wunused-parameter" build.
* jk/unused-post-2.40-part2:
parse-options: drop parse_opt_unknown_cb()
t/helper: mark unused argv/argc arguments
mark "argv" as unused when we check argc
builtins: mark unused prefix parameters
builtins: annotate always-empty prefix parameters
builtins: always pass prefix to parse_options()
fast-import: fix file access when run from subdir
