* jc/maint-read-tree-multi:
checkout branch: prime cache-tree fully
read-tree -m A B: prime cache-tree from the switched-to tree
Move prime_cache_tree() to cache-tree.c
read-tree A B: do not corrupt cache-tree
* mk/maint-apply-swap:
tests: make test-apply-criss-cross-rename more robust
builtin-apply: keep information about files to be deleted
tests: test applying criss-cross rename patch
* jc/maint-1.6.0-keep-pack:
pack-objects: don't loosen objects available in alternate or kept packs
t7700: demonstrate repack flaw which may loosen objects unnecessarily
Remove --kept-pack-only option and associated infrastructure
pack-objects: only repack or loosen objects residing in "local" packs
git-repack.sh: don't use --kept-pack-only option to pack-objects
t7700-repack: add two new tests demonstrating repacking flaws
is_kept_pack(): final clean-up
Simplify is_kept_pack()
Consolidate ignore_packed logic more
has_sha1_kept_pack(): take "struct rev_info"
has_sha1_pack(): refactor "pretend these packs do not exist" interface
git-repack: resist stray environment variable
* bs/maint-1.6.0-tree-walk-prefix:
match_tree_entry(): a pathspec only matches at directory boundaries
tree_entry_interesting: a pathspec only matches at directory boundary
If the local receiving repository has disabled the use of delta base
offset, for example to retain compatibility with older versions of
Git that predate OFS_DELTA, we shouldn't ask for ofs-delta support
when we obtain a pack from the remote server.
[ issue noticed by Shawn Pearce ]
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The combine diff logic knew only about blobs (and their checked-out form
in the work tree, either regular files or symlinks), and barfed when fed
submodules. This "externalizes" gitlinks in the same way as the normal
patch generation codepath does (i.e. "Subproject commit Xxx\n") to fix the
issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.1:
grep: fix segfault when "git grep '('" is given
Documentation: fix a grammatical error in api-builtin.txt
builtin-merge: fix a typo in an error message
* maint-1.6.0:
grep: fix segfault when "git grep '('" is given
Documentation: fix a grammatical error in api-builtin.txt
builtin-merge: fix a typo in an error message
A minor fix to place the terminal input on a new line if test-genrandom
is run with no arguments.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I realized that this test does check if git-apply succeeds, but doesn't
tell if it applies patches correctly. So I added test_cmp to check it.
I also added a test which checks swapping three files.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Example correct diff generated by `diff -M -B' might look like this:
diff --git a/file1 b/file2
similarity index 100%
rename from file1
rename to file2
diff --git a/file2 b/file1
similarity index 100%
rename from file2
rename to file1
Information about removing `file2' comes after information about creation
of new `file2' (renamed from `file1'). Existing implementation isn't able to
apply such patch, because it has to know in advance which files will be
removed.
This patch populates fn_table with information about removal of files
before calling check_patch() for each patch to be applied.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When switching to another branch, the earlier code relied on incremental
invalidation of cache-tree entries to degrade it. While it is not wrong
per-se, we know that the resulting index must fully match the branch we
are switching to unless the -m (merge) option is used.
We should simply fully re-prime the cache-tree using the new tree object
in such a case. And for safety, invalidate the cache-tree as a whole in
other cases.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When switching to a new branch with "read-tree -m A B", the resulting
index must match tree B and we can prime the cache tree with it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit aab3b9a (read-tree A B C: do not create a bogus index
and do not segfault, 2009-03-12) resurrected the support for an obscure
(but useful) feature to read and overlay more than one tree into the index
without the -m (merge) option. But the fix was not enough.
Exercising this feature exposes a longstanding bug in the code that primes
the cache-tree in the index from the tree that was read. The intention
was that when we know that the index must exactly match the tree we just
read, we prime the entire cache-tree with it.
However, the logic to detect that case incorrectly triggered if you read
two trees without -m. This resulted in a corrupted cache-tree, and
write-tree would have produced an incorrect tree object out of such an
index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit cbd3a01 added a new "q" subcommand to the "git add -p"
command loop, but forgot to add it to the prompt.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ef/maint-fast-export:
builtin-fast-export.c: handle nested tags
builtin-fast-export.c: fix crash on tagged trees
builtin-fast-export.c: turn error into warning
test-suite: adding a test for fast-export with tag variants
* mm/maint-add-p-quit:
Update git-add.txt according to the new possibilities of 'git add -p'.
add-interactive: refactor mode hunk handling
git add -p: new "quit" command at the prompt.
The text is merely cut-and-pasted from git-add--interactive.perl. The
cut-and-paste also fixes a typo.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original implementation considered the mode separately
from the rest of the hunks, asking about it outside the main
hunk-selection loop. This patch instead places a mode change
as the first hunk in the loop. This has two advantages:
1. less duplicated code (since we use the main selection
loop). This also cleans up an inconsistency, which is
that the main selection loop separates options with a
comma, whereas the mode prompt used slashes.
2. users can now skip the mode change and come back to it,
search for it (via "/mode"), etc, as they can with other
hunks.
To facilitate this, each hunk is now marked with a "type".
Mode hunks are not considered for splitting (which would
make no sense, and also confuses the split_hunk function),
nor are they editable. In theory, one could edit the mode
lines and change to a new mode. In practice, there are only
two modes that git cares about (0644 and 0755), so either
you want to move from one to the other or not (and you can
do that by staging or not staging).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's already 'd' to stop staging hunks in a file, but no explicit
command to stop the interactive staging (for the current files and the
remaining ones). Of course you can do 'd' and then ^C, but it would be
more intuitive to allow 'quit' action.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of doing the (potentially very expensive) "in_merge_base()"
check for each commit that might be pruned if it is unreachable, do a
preparatory reachability graph of the commit space, so that the common
case of being reachable can be tested directly.
[ Cleaned up a bit and tweaked to actually work. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This clarifies the pruning rules for unreachable commits by having a
separate helpder function for the unreachability decision.
It's preparation for actual bigger changes to come to speed up the
decision when the reachability calculations become a bottleneck.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When tags that points to tags are passed to fast-export, an error is given,
saying "Tag [TAGNAME] points nowhere?". This fix calls parse_object() on the
object before referencing it's tag, to ensure the tag-info is fully initialized.
In addition, it inserts a comment to point out where nested tags are handled.
This is consistent with the comment for signed tags.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a tag object points to a tree (or another unhandled type), the commit-
pointer is left uninitialized and later dereferenced. This patch adds a
default case to the switch that issues a warning and skips the object.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import doesn't have a syntax to support tree-objects (and some other
object-types), so fast-export shouldn't handle them. However, aborting the
operation is a bit drastic. This patch turns the error into a warning instead.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bs/maint-1.6.0-tree-walk-prefix:
match_tree_entry(): a pathspec only matches at directory boundaries
tree_entry_interesting: a pathspec only matches at directory boundary
* cb/maint-merge-recursive-submodule-fix:
simplify output of conflicting merge
update cache for conflicting submodule entries
add tests for merging with submodules
This documentation update is needed to reflect the recent changes where
"core.sharedRepository = 0mode" was changed to set, not loosen, the
repository permissions.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gitattributes documentation has a section on the "diff"
attribute, with subsections for each of the things you might
want to configure in your diff config section (external
diff, hunk headers, etc). The first such subsection
specifically notes that the definition of the diff driver
should go into $GIT_DIR/config, but subsequent sections do
not.
This location is implied if you are reading the
documentation sequentially, but it is not uncommon for a new
user to jump to (or be referred to) a specific section. For
a new user who does not know git well enough to recognize
the config syntax, it is not clear that those directives
don't also go into the gitattributes file.
This patch just mentions the config file in each subsection,
similar to the way it is mentioned in the first.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When interpreting a config value, the config parser reads in 1+ space
character(s) and puts -one- space character in the buffer as soon as
the first non-space character is encountered (if not inside quotes).
Unfortunately the buffer size check lacks the extra space character
which gets inserted at the next non-space character, resulting in
a crash with a specially crafted config entry.
The unit test now uses Java to compile a platform independent
.NET framework to output the test string in C# :o)
Read: Thanks to Johannes Sixt for the correct printf call
which replaces the perl invocation.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, pushing the "path_name()" call _into_ the show() function
would seem to allow
- more clarity into who "owns" the name (ie now when we free the name in
the show_object callback, it's because we generated it ourselves by
calling path_name())
- not calling path_name() at all, either because we don't care about the
name in the first place, or because we are actually happy walking the
linked list of "struct name_path *" and the last component.
Now, I didn't do that latter optimization, because it would require some
more coding, but especially looking at "builtin-pack-objects.c", we really
don't even want the whole pathname, we really would be better off with the
list of path components.
Why? We use that name for two things:
- add_preferred_base_object(), which actually _wants_ to traverse the
path, and now does it by looking for '/' characters!
- for 'name_hash()', which only cares about the last 16 characters of a
name, so again, generating the full name seems to be just unnecessary
work.
Anyway, so I didn't look any closer at those things, but it did convince
me that the "show_object()" calling convention was crazy, and we're
actually better off doing _less_ in list-objects.c, and giving people
access to the internal data structures so that they can decide whether
they want to generate a path-name or not.
This patch does that, and then for people who did use the name (even if
they might do something more clever in the future), it just does the
straightforward "name = path_name(path, component); .. free(name);" thing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Here's a less trivial thing, and slightly more dubious one.
I was looking at that "struct object_array objects", and wondering why we
do that. I have honestly totally forgotten. Why not just call the "show()"
function as we encounter the objects? Rather than add the objects to the
object_array, and then at the very end going through the array and doing a
'show' on all, just do things more incrementally.
Now, there are possible downsides to this:
- the "buffer using object_array" _can_ in theory result in at least
better I-cache usage (two tight loops rather than one more spread out
one). I don't think this is a real issue, but in theory..
- this _does_ change the order of the objects printed. Instead of doing a
"process_tree(revs, commit->tree, &objects, NULL, "");" in the loop
over the commits (which puts all the root trees _first_ in the object
list, this patch just adds them to the list of pending objects, and
then we'll traverse them in that order (and thus show each root tree
object together with the objects we discover under it)
I _think_ the new ordering actually makes more sense, but the object
ordering is actually a subtle thing when it comes to packing
efficiency, so any change in order is going to have implications for
packing. Good or bad, I dunno.
- There may be some reason why we did it that odd way with the object
array, that I have simply forgotten.
Anyway, now that we don't buffer up the objects before showing them
that may actually result in lower memory usage during that whole
traverse_commit_list() phase.
This is seriously not very deeply tested. It makes sense to me, it seems
to pass all the tests, it looks ok, but...
Does anybody remember why we did that "object_array" thing? It used to be
an "object_list" a long long time ago, but got changed into the array due
to better memory usage patterns (those linked lists of obejcts are
horrible from a memory allocation standpoint). But I wonder why we didn't
do this back then. Maybe there's a reason for it.
Or maybe there _used_ to be a reason, and no longer is.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Wed, 8 Apr 2009, Björn Steinbrink wrote:
>
> The name of the processed object was duplicated for passing it to
> add_object(), but that already calls path_name, which allocates a new
> string anyway. So the memory allocated by the xstrdup calls just went
> nowhere, leaking memory.
Ack, ack.
There's another easy 5% or so for the built-in object walker: once we've
created the hash from the name, the name isn't interesting any more, and
so something trivial like this can help a bit.
Does it matter? Probably not on its own. But a few more memory saving
tricks and it might all make a difference.
Linus
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test was added recently (5a688fe, "core.sharedrepository = 0mode"
should set, not loosen; 2009-03-28). It checked the result of a sed
invocation for emptyness, but in some cases it forgot to print anything
at all, so that those checks would never be false.
Due to this mistake, it went unnoticed that the files in objects/info are
not necessarily 0440, but can also be 0660. Because the 0mode setting
tries to guarantee that the files are accessible only to the people they
are meant to be used by, we should only make sure that they are readable
by the user and the group when the configuration is set to 0660. It is a
separate matter from the core.shredrepository settings that w-bit from
immutable object files under objects/[0-9a-f][0-9a-f] directories should
be dropped.
COMMIT_EDITMSG is still world-readable, but it (and any transient files
that are meant for repositories with a work tree) does not matter. If you
are working on a shared machine and on a sekrit stuff, the root of the
work tree would be with mode 0700 (or 0750 to allow peeking by other
people in the group), and that would mean that .git/COMMIT_EDITMSG in such
a repository would not be readable by the strangers anyway.
Also, in the real-world use case, .git/COMMIT_EDITMSG will be given to an
arbitrary editor the user happens to use, and we have no guarantee what it
does (e.g. it may create a new file with umask and replace, it may rewrite
in place, it may leave an editor backup file but use umask to create it,
etc.), and the protection of the file lies majorly on the protection of
the root of the work tree.
This test cannot be run on Windows; it requires POSIXPERM when merged to
'master'.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/shared-literally:
t1301: loosen test for forced modes
set_shared_perm(): sometimes we know what the final mode bits should look like
move_temp_to_file(): do not forget to chmod() in "Coda hack" codepath
Move chmod(foo, 0444) into move_temp_to_file()
"core.sharedrepository = 0mode" should set, not loosen
* jc/maint-1.6.0-keep-pack:
pack-objects: don't loosen objects available in alternate or kept packs
t7700: demonstrate repack flaw which may loosen objects unnecessarily
Remove --kept-pack-only option and associated infrastructure
pack-objects: only repack or loosen objects residing in "local" packs
git-repack.sh: don't use --kept-pack-only option to pack-objects
t7700-repack: add two new tests demonstrating repacking flaws
is_kept_pack(): final clean-up
Simplify is_kept_pack()
Consolidate ignore_packed logic more
has_sha1_kept_pack(): take "struct rev_info"
has_sha1_pack(): refactor "pretend these packs do not exist" interface
git-repack: resist stray environment variable
Conflicts:
t/t7700-repack.sh
The name of the processed object was duplicated for passing it to
add_object(), but that already calls path_name, which allocates a new
string anyway. So the memory allocated by the xstrdup calls just went
nowhere, leaking memory.
This reduces the RSS usage for a "rev-list --all --objects" by about 10% on
the gentoo repo (fully packed) as well as linux-2.6.git:
gentoo:
| old | new
----------------|-------------------------------
RSS | 1537284 | 1388408
VSZ | 1816852 | 1667952
time elapsed | 1:49.62 | 1:48.99
min. page faults| 417178 | 379919
linux-2.6.git:
| old | new
----------------|-------------------------------
RSS | 324452 | 292996
VSZ | 491792 | 460376
time elapsed | 0:14.53 | 0:14.28
min. page faults| 89360 | 81613
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, git complains about not finding a branch to pull from in
'branch..merge', which is hardly understandable. While we're there,
reword the sentences slightly.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.1:
Documentation: clarify .gitattributes search
git-checkout.txt: clarify that <branch> applies when no path is given.
git-checkout.txt: fix incorrect statement about HEAD and index
Most of the time when we give branch name in the message, we quote it
inside a pair of single-quotes. git-checkout uses double-quotes; this
patch corrects the inconsistency.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.0:
Documentation: clarify .gitattributes search
git-checkout.txt: clarify that <branch> applies when no path is given.
git-checkout.txt: fix incorrect statement about HEAD and index
Use the term "toplevel of the work tree" in gitattributes.txt and
gitignore.txt to define the limits of the search for those files.
Signed-off-by: Jason Merrill <jason@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, the sentence "Defaults to HEAD." can be mis-read to mean
that "git checkout -- hello.c" checks-out from HEAD.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command "git checkout" checks out from the index by default, not
HEAD (the introducing comment were correct, but the detailled
explanation added below were not).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Actually, you have to set the -b option after the add command.
Signed-off-by: Julien Danjou <julien@danjou.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously we ignored the result of calling add_interactive,
which meant that if an error occurred we simply committed
whatever happened to be in the index.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the code without changing the semantics and removes
the unhelpful "needs $sha1" part of the conflicting submodule message.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When merging merge bases during a recursive merge we do not want to
leave any unmerged entries. Otherwise we cannot create a temporary
tree for the recursive merge to work with.
We failed to do so in case of a submodule conflict between merge
bases, causing a NULL pointer dereference in the next step of the
recursive merge.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While 'git checkout <submodule>' should not update the submodule's
working directory, it should update the index. This is in line with
how submodules are handled in the rest of Git.
While at it, test 'git reset [<commit>] <submodule>', too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dm/maint-docco:
Documentation: Remove spurious uses of "you" in git-bisect.txt.
Documentation: minor grammatical fix in git-check-ref-format.txt
Documentation: minor grammatical fixes in git-check-attr.txt
Documentation: minor grammatical fixes in git-cat-file.txt
Documentation: minor grammatical fixes and rewording in git-bundle.txt
Documentation: remove some uses of the passive voice in git-bisect.txt
Documentation: reword example text in git-bisect.txt.
Documentation: reworded the "Description" section of git-bisect.txt.
Documentation: minor grammatical fixes in git-branch.txt.
Documentation: minor grammatical fixes in git-blame.txt.
Documentation: reword the "Description" section of git-bisect.txt.
Documentation: minor grammatical fixes in git-archive.txt.
Previously the code did a simple prefix match, which means that a path in
a directory "frotz/" would have matched with pathspec "f".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the code did a simple prefix match, which means that a
path in a directory "frotz/" would have matched with pathspec "f".
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the aspects of the test checked explicitly for the
g+s bit to be set on created directories. However, this is
only the means to an end (the "end" being having the correct
group set). And in fact, on systems where
DIR_HAS_BSD_GROUP_SEMANTICS is set, we do not even need to
use this "means" at all, causing the test to fail.
This patch removes that part of the test. In an ideal world
it would be replaced by a test to check that the group was
properly assigned, but that is difficult to automate because
it requires the user running the test suite be a member of
multiple groups.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some old versions of gcc don't seem to like us negating an
enum constant. Let's work around it by negating the other
half of the comparison instead.
Reported by Pierre Poissinger on gcc 2.9.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0925ce4(Add map_user() and clear_mailmap() to mailmap) broke the
lower-casing of email addresses. This mostly did not matter if your
.mailmap has only lower-case email addresses; However, we did not
require .mailmap to contain lowercase-only email addresses.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.1:
Fix bash completion in path with spaces
bash completion: only show 'log --merge' if merging
git-tag(1): add hint about commit messages
Documentation: update graph api example.
Conflicts:
contrib/completion/git-completion.bash
* maint-1.6.0:
Fix bash completion in path with spaces
bash completion: only show 'log --merge' if merging
git-tag(1): add hint about commit messages
Documentation: update graph api example.
The gitk completion only shows --merge if MERGE_HEAD is present.
Do it the same way for git-log completion.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a tag is not annotated, git tag displays the commit message
instead. Add this hint to the manpage to unhide this secret.
Signed-off-by: Nico Schottelius <nico@ikn.schottelius.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of commit 03300c0 the graph API uses '*' for all nodes including merges.
This updates the example in the documentation to match.
Signed-off-by: Allan Caffee <allan.caffee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To find the blob object name given a tree and pathname, we were
incorrectly calling "git ls-tree" with a "--" argument followed
by the pathname of the file we wanted to get.
git ls-tree <TREE> -- --dashed/path/name.c
Unlike many command-line interfaces, the "--" alone does not
symbolize the end of non-option arguments on the command-line.
ls-tree interprets the "--" as a prefix to match against, thus
the entire contents of the --dashed/* hierarchy would be
returned because the "--" matches "--dashed" and every path
under it.
Thanks to Anton Gyllenberg for pointing me toward the
Twisted repository as a real-world example of this case.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Embarrassingly, the common prefix calculation did not work properly, due
to a mistake in the assignment: instead of assigning the dirname of the
current file name, the dirname of the current common prefix needs to
be assigned to common prefix, when the current prefix does not match the
current file name.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
adjust_shared_perm() first obtains the mode bits from lstat(2), expecting
to find what the result of applying user's umask is, and then tweaks it
as necessary. When the file to be adjusted is created with mkstemp(3),
however, the mode thusly obtained does not have anything to do with user's
umask, and we would need to start from 0444 in such a case and there is no
point running lstat(2) for such a path.
This introduces a new API set_shared_perm() to bypass the lstat(2) and
instead force setting the mode bits to the desired value directly.
adjust_shared_perm() becomes a thin wrapper to the function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now move_temp_to_file() is responsible for doing everything that is
necessary to turn a tempfile in $GIT_DIR into its final form, it must make
sure "Coda hack" codepath correctly makes the file read-only.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bring documentation in test-lib and clean target
in Makefile in-line with abc5d372.
Signed-off-by: Emil Sit <sit@emilsit.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing out a loose object or a pack (index), move_temp_to_file() is
called to finalize the resulting file. These files (loose files and packs)
should all have permission mode 0444 (modulo adjust_shared_perm()).
Therefore, instead of doing chmod(foo, 0444) explicitly from each callsite
(or even forgetting to chmod() at all), do the chmod() call from within
move_temp_to_file().
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the behaviour of octal notation to how it is defined in the
documentation, while keeping the traditional "loosen only" semantics
intact for "group" and "everybody".
Three main points of this patch are:
- For an explicit octal notation, the internal shared_repository variable
is set to a negative value, so that we can tell "group" (which is to
"OR" in 0660) and 0660 (which is to "SET" to 0660);
- git-init did not set shared_repository variable early enough to affect
the initial creation of many files, notably copied templates and the
configuration. We set it very early when a command-line option
specifies a custom value.
- Many codepaths create files inside $GIT_DIR by various ways that all
involve mkstemp(), and then call move_temp_to_file() to rename it to
its final destination. We can add adjust_shared_perm() call here; for
the traditional "loosen-only", this would be a no-op for many codepaths
because the mode is already loose enough, but with the new behaviour it
makes a difference.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users were confused about the meaning and use of the --root option.
Notably, since 68c2ec7 (format-patch: show patch text for the root
commit, 2009-01-10), --root has nothing to do with showing the patch
text for the root commit any more.
Shorten and clarify the corresponding paragraph in the DESCRIPTION
section, document --root under OPTIONS, and add an explicit note that
root commits are formatted regardless.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
the "--use-separate-remote" option no longer exists, having since
become the default for a clone.
Signed-off-by: Carlo Marcelo Arenas Belon <carenas@sajinet.com.pe>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were added by accident in a42dea3.
This patch also rewords the description of how ranges of commits can be
skipped.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, 'git diff --no-index --stat a b' generated patch output in
addition to the --stat output (or whatever other output format was
requested). Now only the requested output is generated, and patch
output remains the default.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Long messages like those from lockfile.c when a lock can't be
obtained truncate with only 256 bytes in the message buffer.
Bump it to 1024 to give more space for these longer cases.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A bug report with "unable to write sha1 file" made us realize that we do
not have enough information to guess why close() is failing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a 32-bit system, the maximum possible size for an object is less than
4GB, while 64-bit systems may cope with larger objects. Due to this
limitation, variables holding object sizes are using an unsigned long
type (32 bits on 32-bit systems, or 64 bits on 64-bit systems).
When large objects are encountered, and/or people play with large delta
depth values, it is possible for the maximum allowed delta size
computation to overflow, especially on a 32-bit system. When this
occurs, surviving result bits may represent a value much smaller than
what it is supposed to be, or even zero. This prevents some objects
from being deltified although they do get deltified when a smaller depth
limit is used. Fix this by always performing a 64-bit multiplication.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit also converts all reference specifications to a monospaced font,
as the embedded ~ character used in some of the references sometimes causes
the text up to the next ~ to be displayed incorrectly as a subscript when the
HTML pages are generated. This was tested with asciidoc 8.2.5.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the index says that the file in the work tree that corresponds to the
blob object that is used for comparison is known to be unchanged, "diff"
reads from the file and applies convert_to_git(), instead of inflating the
object, to feed the internal diff engine with, because an earlier
benchnark found that it tends to be faster to use this optimization.
However, the index can lie when the path is marked as assume-unchanged.
Disable the optimization for such paths.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When preparing temporary files for an external diff or textconv, it is
easier on the external tools, especially when they are implemented using
platform tools, if they are fed the input after convert_to_working_tree().
This fixes msysGit issue 177.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'Everyday GIT' guide was using the old dashed form
of git-init.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code will end up calling lstat() to check whether the
file still exists; obviously this doesn't work if we're not
in the worktree.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --pickaxe-regex is used, forward past the end of matches instead of
advancing to the byte after their start. This way matches count only
once, even if the regular expression matches their tail -- like in the
fixed-string fork of the code.
E.g.: /.*/ used to count the number of bytes instead of the number of
lines. /aa/ resulted in a count of two in "aaa" instead of one.
Also document the fact that regexec() needs a NUL-terminated string as
its second argument by adding an assert().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/maint-submodule-normalize-path:
git submodule: Fix adding of submodules at paths with ./, .. and //
git submodule: Add test cases for git submodule add
* js/maint-1.6.0-path-normalize:
Remove unused normalize_absolute_path()
Test and fix normalize_path_copy()
Fix GIT_CEILING_DIRECTORIES on Windows
Move sanitary_path_copy() to path.c and rename it to normalize_path_copy()
Make test-path-utils more robust against incorrect use
For example:
git format-patch --numbered-files --stdout --attach HEAD~~
will create two messages with files 1 and 2 attached respectively.
Without --attach/--inline but with --stdout, --numbered-files option
can be simply ignored, because we are not creating any file ourselves.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If pack-objects is called with the --unpack-unreachable option then it
will unpack (i.e. loosen) all unreferenced objects from local not-kept
packs, including those that also exist in packs residing in an alternate
object database or a locally kept pack. The only user of this option is
git-repack.
In this case, repack will follow the call to pack-objects with a call to
prune-packed, which will delete these newly loosened objects, making the
act of loosening a waste of time. The unnecessary loosening can be
avoided by checking whether an object exists in a non-local pack or a
locally kept pack before loosening it.
This fixes the 'local packed unreachable obs that exist in alternate ODB
are not loosened' test in t7700.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let PATH0=$PATH that was set before the invocation.
Let /foo be a build directory.
Let /pfx be the installation prefix.
Let pfxexecpath=/pfx/libexec/git-core.
The following is going on when 'git --exec-path=/foo gc' is invoked:
1. git sets PATH=/foo:$PATH0 using the path from --exec-path
2. gc execs 'git repack' (note: no dash).
3. Since there is a git in /foo (it's a build directory), /foo/git is
taken.
4. No explicit exec-path is set this time, hence, this secondary git sets
PATH=$pfxexecpath:/foo:$PATH
5. Since 'repack' is not a built-in, execv_dashed_external execs
'git-repack' (note: dash).
6. There is a $pfxexecpath/git-repack, and it is taken.
7. This git-repack runs 'git pack-objects' (note: no dash).
8. There is no git in $pfxexecpath, but there is one in /foo. Hence,
/foo/git is run.
9. pack-objects is a builtin, hence, in effect /foo/git-pack-objects
is run.
As you can see, the way in which we previously set the PATH allowed to
mix gits of different vintage. By setting GIT_EXEC_PATH when --exec-path
was given on the command line, we reduce the confusion.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an unreferenced object exists in both a local pack and in either a pack
residing in an alternate object database or a local kept pack, then the
pack-objects call made by repack will loosen that object only to have it
immediately pruned by repack's call to prune-packed.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it more pleasant to read about a branch deletion by adding "was".
Jeff King suggested this, and I ignored it. He was right.
Update t3200 test again to match the change in output.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option to pack-objects/rev-list was created to improve the -A and -a
options of repack. It was found to be lacking in that it did not provide
the ability to differentiate between local and non-local kept packs, and
found to be unnecessary since objects residing in local kept packs can be
filtered out by the --honor-pack-keep option.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two features were invented for use by repack when repack will delete
the local packs that have been made redundant. The packs accessible
through alternates are not deleted by repack, so the objects contained in
them are still accessible after the local packs are deleted. They do not
need to be repacked into the new pack or loosened. For the case of
loosening they would immediately be deleted by the subsequent prune-packed
that is called by repack anyway.
This fixes the test
'packed unreachable obs in alternate ODB are not loosened' in t7700.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --kept-pack-only option to pack-objects treats all kept packs as equal.
This results in objects that reside in an alternate pack that has a .keep
file, not being packed into a newly created pack when the user specifies the
-a option to repack. Since the user may not have any control over the
alternate database, git should not refrain from repacking those objects
even though they are in a pack with a .keep file.
This fixes the 'packed obs in alternate ODB kept pack are repacked' test in
t7700.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1) The new --kept-pack-only mechansim of rev-list/pack-objects has
replaced --unpacked=. This new mechansim does not operate solely on
"local" packs now. The result is that objects residing in an alternate
pack which has a .keep file will not be repacked with repack -a.
This flaw is only apparent when a commit object is the one residing in
an alternate kept pack.
2) The 'repack unpacked objects' and 'loosen unpacked objects' mechanisms
of pack-objects, i.e. --keep-unreachable and --unpack-unreachable,
now do not operate solely on local packs. The --keep-unreachable
option no longer has any callers, but --unpack-unreachable is used when
repack is called with '-A -d' and the local repo has existing packs.
In this case, objects residing in alternate, not-kept packs will be
loosened, and then immediately deleted by repack's call to
prune-packed.
The test must manually call pack-objects to avoid the call to
prune-packed that is made by repack when -d is used.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid splitting sentences across examples of command usage.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing text was very vague about what exactly it means
for difference to "contain" a change. This seems to cause
confusion on the mailing list every month or two.
To fix it we:
1. use "introduce or remove an instance of" instead of
"contain"
2. point the user to gitdiffcore(7), which contains a more
complete explanation
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup_revisions() while getting the command line arguments parses the
given commits from the command line, which means their direct parents will
not be rewritten by the custom graft file.
Call read_ancestry() early to work around this issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reword this section to make it less chatty. Also make minor grammatical
fixes.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config file is not the only place remotes are defined, and without
consulting .git/remotes and .git/branches, you won't know if "origin" is
configured by the user. Don't give up too early and insult the user with
a wisecrack "Where do you want to fetch from today?"
The only thing the previous patch seems to want to prevent from happening
is a lazy "git fetch/push" that does not say where-from/to to produce an
error message 'origin not found', and we can do that by not letting
add_url_alias() to turn a nickname "origin" literally into a pathname
"origin" without changing the rest of the logic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.0:
bisect: fix another instance of eval'ed string
bisect: fix quoting TRIED revs when "bad" commit is also "skip"ped
Support "\" in non-wildcard exclusion entries
Conflicts:
git-bisect.sh
* ks/maint-1.6.0-mailinfo-folded:
mailinfo: tests for RFC2047 examples
mailinfo: add explicit test for mails like '<a.u.thor@example.com> (A U Thor)'
mailinfo: 'From:' header should be unfold as well
mailinfo: correctly handle multiline 'Subject:' header
* js/maint-1.6.1-remote-remove-mirror:
builtin-remote: make rm operation safer in mirrored repository
builtin-remote: make rm() use properly named variable to hold return value
* ks/maint-1.6.0-mailinfo-folded:
mailinfo: tests for RFC2047 examples
mailinfo: add explicit test for mails like '<a.u.thor@example.com> (A U Thor)'
mailinfo: 'From:' header should be unfold as well
mailinfo: correctly handle multiline 'Subject:' header
"git read-tree A B C..." without the "-m" (merge) option is a way to read
these trees on top of each other to get an overlay of them.
An ancient commit ee6566e (Rewrite read-tree, 2005-09-05) passed the
ADD_CACHE_SKIP_DFCHECK flag when calling add_index_entry() to add the
paths obtained from these trees to the index, but it is an incorrect use
of the flag. The flag is meant to be used by callers who know the
addition of the entry does not introduce a D/F conflict to the index in
order to avoid the overhead of checking.
This bug resulted in a bogus index that records both "x" and "x/z" as a
blob after reading three trees that have paths ("x"), ("x", "y"), and
("x/z", "y") respectively. 34110cd (Make 'unpack_trees()' have a separate
source and destination index, 2008-03-06) refactored the callsites of
add_index_entry() incorrectly and added more codepaths that use this flag
when it shouldn't be used.
Also, 0190457 (Move 'unpack_trees()' over to 'traverse_trees()' interface,
2008-03-05) introduced a bug to call add_index_entry() for the tree that
does not have the path in it, passing NULL as a cache entry. This caused
reading multiple trees, one of which has path "x" but another doesn't, to
segfault.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
3e0c4ff (send-email: respect in-reply-to regardless of threading,
2009-03-01) fixed the handling of the In-Reply-To header when both
--no-thread and --in-reply-to are in effect. Add a test for it.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-send-email:
send-email: don't create temporary compose file until it is needed
send-email: --suppress-cc improvements
send-email: handle multiple Cc addresses when reading mbox message
send-email: allow send-email to run outside a repo
Earlier, the rsync tests were disabled by default, as they needed a
running rsyncd daemon. This was only due to the limitation that our
rsync transport only allowed full URLs of the form
rsync://<host>/<path>
Relaxing the URLs to allow
rsync:<path>
permitted the change in the tests to run whenever rsync is available,
without requiring a fully configured and running rsyncd.
While at it, the tests were fixed so that they run in directories with a
space in their name.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there's no explicitly-named remote, we use the remote specified
for the current branch, which in turn defaults to "origin". But it
this case should require the remote to actually be configured, and not
fall back to the path "origin".
Possibly, the config file's "remote = something" should require the
something to be a configured remote instead of a bare repository URL,
but we actually test with a bare repository URL.
In fetch, we were giving the sensible error message when coming up
with a URL failed, but this wasn't actually reachable, so move that
error up and use it when appropriate.
In push, we need a new error message, because the old one (formerly
unreachable without a lot of help) used the repo name, which was NULL.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a cherry-pick of an empty commit is done, release the lock
held on the index.
The fix is the same as was applied to similar code in 4271666046.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation is just a pointer to the --bool and --int
options, but it makes sense to at least mention that it
exists.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the tests checked the exit code manually, even going
so far as to run git outside of the test_expect harness.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a standard definition of isascii() and use it to replace an open
coded high-bit test in pretty.c. While we're there, write the ESC
char as the more commonly used '\033' instead of as 0x1b to enhance
its grepability.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It looks like someone did 90% of the work, then forgot to actually use
the function in one place.
Also the helper function did not use the correct variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make 'git submodule add' normalize the submodule path in the
same way as 'git ls-files' does, so that 'git submodule init' looks up
the information in .gitmodules with the same key under which 'git
submodule add' stores it.
This fixes 4 known breakages.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add simple test cases for adding and initialising submodules. The
init step is necessary in order to verify the added information.
The second test exposes a known breakage due to './' in the path: git
ls-files simplifies the path but git add does not, which leads to git
init looking for different lines in .gitmodules than git add adds.
The other tests add test cases for '//' and '..' in the path which
currently fail for the same reason.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These may not be obvious to non-native English speakers
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-send-email supports the --in-reply-to option even with
--no-thread. However, the code that adds the relevant mail headers
was guarded by a test for --thread.
Remove the test, so that the user's choice is respected.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When memmem() was imported from glibc 2.2 into compat/, an optimization
was dropped in the process, in order to make the code smaller and simpler.
It was OK because memmem() wasn't used in performance-critical code. Now
the situation has changed and we can benefit from this optimization.
The trick is to avoid calling memcmp() if the first character of the needle
already doesn't match. Checking one character directly is much cheaper
than the function call overhead. We keep the first character of the needle
in the variable named point and the rest in the one named tail.
The following commands were run in a Linux kernel repository and timed, the
best of five results is shown:
$ STRING='Ensure that the real time constraints are schedulable.'
$ git log -S"$STRING" HEAD -- kernel/sched.c >/dev/null
On Windows Vista x64, before:
real 0m8.470s
user 0m0.000s
sys 0m0.000s
And after the patch:
real 0m1.887s
user 0m0.000s
sys 0m0.000s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use memmem() instead of open-coding it. The system libraries usually have a
much faster version than the memcmp()-loop here. Even our own fall-back in
compat/, which is used on Windows, is slightly faster.
The following commands were run in a Linux kernel repository and timed, the
best of five results is shown:
$ STRING='Ensure that the real time constraints are schedulable.'
$ git log -S"$STRING" HEAD -- kernel/sched.c >/dev/null
On Ubuntu 8.10 x64, before (v1.6.2-rc2):
8.09user 0.04system 0:08.14elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+30952minor)pagefaults 0swaps
And with the patch:
1.50user 0.04system 0:01.54elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+30645minor)pagefaults 0swaps
On Fedora 10 x64, before:
8.34user 0.05system 0:08.39elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+29268minor)pagefaults 0swaps
And with the patch:
1.15user 0.05system 0:01.20elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+32253minor)pagefaults 0swaps
On Windows Vista x64, before:
real 0m9.204s
user 0m0.000s
sys 0m0.000s
And with the patch:
real 0m8.470s
user 0m0.000s
sys 0m0.000s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final hunk in this patch corrects what appears to be a typo:
of --> or
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Short story: There is a section in t3400 that tests fundamental rebase
properties. 3ec7371f (Add two extra tests for git rebase, 2009-02-09)
added a check that rebase works on a detached HEAD, but the test was put
near the end of the file. This moves it to a more suitable place.
Long story: The test that preceded the one in question tests that a
rebased commit degrades from a content change with mode change to a
mere mode change. But on Windows, where we have core.filemode=false,
the original commit did not record the mode change, and so the rebase
operation did not rebase anything. This caused the subsequent detached
HEAD test to fail.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes an issue reported by Johannes Sixt on the git mailing list:
> This recipe sends gitk into an endless loop. In git.git do:
>
> cd t
> # remove chmod a+x A near the end of the file
> sed -i 's/chmod/: chmod/' t3400-rebase.sh
> sh t3400-rebase.sh --debug
> cd trash\ directory.t3400-rebase/
> gitk master modechange modechange@{1}
>
>
> I briefly see the history chart, but the dot that should be modechange@{1}
> is missing. One automatically selected commit is shown in the diff section
> below. But then the commit list is cleared and gitk goes into an infinite
> loop.
>
> Things work alright if either modechange@{1} is dropped, or the 'chmod'
> line is left unchanged, which is a bit strange.
>
> This is with git version 1.6.1.2.390.gba743
There were actually two problems. This recipe created a situation where
git log would output a child commit after its parent. This meant that
we called fix_reversal which called splitvarc, which should call modify_arc
to note the fact that it has modified the arc that it has just split. It
wasn't, which meant that displayorder and other variables got into an
inconsistent state (a commit appearing twice in displayorder).
This then meant that the targetrow/targetid logic in drawvisible thought
it need to redraw each time. That, together with the fact that drawvisible
called drawcommits which called drawvisible if a redraw was needed, led
to the infinite loop.
In fact drawvisible is now the only caller of drawcommits. Thus, the
start and end row arguments to drawcommits always encompass the whole
visible area, so drawcommits doesn't need to call drawvisible to redraw;
it just needs to clear the screen and draw what it's been asked to.
This fixes these two problems by adding a call to modify_arc in
splitvarc and by taking out the call to drawvisible in drawcommits.
It also removes an unrelated left-over debugging puts in external_blame.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Call setup_git_directory() before git_config() to make sure git_dir is set
to the proper value.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parameters accepted by the --whitespace option of "git apply" have
changed over time, and the documentation for "git rebase" was out of
sync. Remove the specific parameter list from the "git rebase"
documentation and simply point to the "git apply" documentation for
details, as is already done in the "git am" documentation.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now is_kept_pack() is just a member lookup into a structure, we can write
it as such.
Also rewrite the sole caller of has_sha1_kept_pack() to switch on the
criteria the callee uses (namely, revs->kept_pack_only) between calling
has_sha1_kept_pack() and has_sha1_pack(), so that these two callees do not
have to take a pointer to struct rev_info as an argument.
This removes the header file dependency issue temporarily introduced by
the earlier commit, so we revert changes associated to that as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes --unpacked=<packfile> parameter from the revision parser, and
rewrites its use in git-repack to pass a single --kept-pack-only option
instead.
The new --kept-pack-only option means just that. When this option is
given, is_kept_pack() that used to say "not on the --unpacked=<packfile>
list" now says "the packfile has corresponding .keep file".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors three loops that check if a given packfile is on the
ignore_packed list into a function is_kept_pack(). The function returns
false for a pack on the list, and true for a pack not on the list, because
this list is solely used by "git repack" to pass list of packfiles that do
not have corresponding .keep files, i.e. a packfile not on the list is
"kept".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Its "ignore_packed" parameter always comes from struct rev_info. This
patch makes the function take a pointer to the surrounding structure, so
that the refactoring in the next patch becomes easier to review.
There is an unfortunate header file dependency and the easiest workaround
is to temporarily move the function declaration from cache.h to
revision.h; this will be moved back to cache.h once the function loses
this "ignore_packed" parameter altogether in the later part of the
series.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the callers of this function except only one pass NULL to its last
parameter, ignore_packed.
Introduce has_sha1_kept_pack() function that has the function signature
and the semantics of this function, and convert the sole caller that does
not pass NULL to call this new function.
All other callers and has_sha1_pack() lose the ignore_packed parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script used $args and $existing without initializing it to empty. It
would have been confused by an environment variable the end user had
before running it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When %z was removed from the strftime call and subsituted with a
local gmt offset calculation, time() was no longer the default for
all time functions as it was with the previous localtime(shift).
This is now corrected so that format_svn_time behaves as it used to.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though this will break things for some extremely rare repositories
used by broken Windows clients, it's probably not worth enabling this by
default as it has negatively affected many more users than it has helped
from what we've seen so far.
The extremely rare repositories that have broken symlinks in them will be
silently corrupted in import; but users can still reenable this option and
restart the import.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is nothing to be skipped, the output from
rev-list --bisect-vars was eval'ed without first being
strung together with &&; this is probably not a problem
as it is much less likely to be a bad input than the list
handcrafted by the filter_skip function, but it still is
a good discipline.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "bad" commit was also "skip"ped and when more than one
commit was skipped, the "filter_skipped" function would have
printed something like:
bisect_rev=<hash1>|<hash2>
(where <hash1> and <hash2> are hexadecimal sha1 hashes)
and this would have been evaled later as piping "bisect_rev=<hash1>"
into "<hash2>", which would have failed.
So this patch makes the "filter_skipped" function properly quote
what it outputs, so that it will print something like:
bisect_rev='<hash1>|<hash2>'
which will be properly evaled later. The caller was not stopping
properly because the scriptlet this function returned to be evaled
was not strung together with && and because of this, an error in
an earlier part of the output was simply ignored.
A test case is added to the test suite.
And while at it, we also initialize the VARS, FOUND and TRIED
variables, so that we protect ourselves from environment variables
the user may have with these names.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you are in the middle of "git rebase", "git am --abort" by mistake
would have referred to nonexistent ORIG_HEAD and barfed, or worse yet, used
a stale ORIG_HEAD and taken you to an unexpected commit.
Also the option parsing did not reject "git am --abort --skip".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git am --abort resets the index unconditionally. But in case a previous
git am exited due to a dirty index it is preferable to keep that index.
Make it so.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OS X's GNU grep does not support -P/--perl-regexp.
We use a basic RE instead, and simplify the pattern slightly by
replacing '+' with '*' so it can be more easily expressed using a basic
RE. The important part of pattern, checking for a SHA-1 has suffix in
the successful PUT/MOVE operations, remains the same. Also, a-z instead
of a-f was an obvious mistake in the original RE. Here are samples of
what we want to match:
127.0.0.1 - - [26/Feb/2009:22:38:13 +0000] "PUT /test_repo.git/objects/3e/a4fbb9e18a401a6463c595d08118fcb9fb7426_fab55116904c665a95438bcc78521444a7db6096 HTTP/1.1" 201 277
127.0.0.1 - - [26/Feb/2009:22:38:13 +0000] "MOVE /test_repo.git/objects/3e/a4fbb9e18a401a6463c595d08118fcb9fb7426_fab55116904c665a95438bcc78521444a7db6096 HTTP/1.1" 201 277
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The AIX mkstemp() modifies its template parameter to an empty string if
the call fails. The existing code had already recomputed the template,
but too late to be good.
See also 6ff6af62, which fixed this problem in a different spot.
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a repository created with git older than f49fb35 (git-init-db: create
"pack" subdirectory under objects, 2005-06-27), objects/pack/ directory is
not created upon initialization. It was Ok because subdirectories are
created as needed inside directories init-db creates, and back then,
packfiles were recent invention.
After the said commit, new codepaths started relying on the presense of
objects/pack/ directory in the repository. This was exacerbated with
8b4eb6b (Do not perform cross-directory renames when creating packs,
2008-09-22) that moved the location temporary pack files are created from
objects/ directory to objects/pack/ directory, because moving temporary to
the final location was done carefully with lazy leading directory creation.
Many packfile related operations in such an old repository can fail
mysteriously because of this.
This commit introduces two helper functions to make things work better.
- odb_mkstemp() is a specialized version of mkstemp() to refactor the
code and teach it to create leading directories as needed;
- odb_pack_keep() refactors the code to create a ".keep" file while
create leading directories as needed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch allows the HTTP tests to run on OS X 10.5. It is not
sufficient to be able to pass in LIB_HTTPD_PATH and
LIB_HTTPD_MODULE_PATH alone, as the apache.conf also needs a couple
tweaks.
These changes are put into an <IfDefine> to keep them Darwin specific,
but this means lib-httpd.sh needs to be modified to pass -DDarwin to
apache when running on Darwin. As long as we're making this change to
lib-httpd.sh, we may as well set LIB_HTTPD_PATH and
LIB_HTTPD_MODULE_PATH to appropriate default values for the platform.
Note that we now pass HTTPD_PARA to apache at shutdown as well.
Otherwise apache will emit a harmless, but noisy warning that LogFormat
is an unknown directive.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rules how the patterns are matched against path names are the same
for .gitattribute and .gitignore files.
This also replace the notion "glob pattern" by "pattern" because
gitignore.txt talks about "glob" only in some contexts where the pattern
is mentioned.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Global static variables don't need to be initialized to 0/NULL.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
README suggested to look at "Documentation/gittutorial.txt" for the
tutorial and to use "man git-commandname" for documentation of each
command.
This was not consistent because the tutorial can also be available with
"man gittutorial" once git is installed, and the documentation for each
command can be available at "Documentation/git-commandname.txt" before
installing git.
This patch tries to make the description more consistent. It also fixes
the path to the cvs-migration documentation that changed from
"Documentation/cvs-migration.txt" to "Documentation/gitcvs-migration.txt".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When run without --author and it fails to determine an author, git
quiltimport tries `read patch_author` to get user input, but standard
input has been redirected to the patch series file. This commit lets
quiltimport read the series file through file descriptor 3 so that the
standard input is preserved.
Reported by Uwe Kleine-König through http://bugs.debian.org/515910
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, for dates older than 12 months we fell back to just giving the
absolute time. This can be a bit jarring when reading a list of times.
Instead, let's switch to "Y years, M months" for five years, and then just
"Y years" after that.
No particular reason on the 5 year cutoff except that it seemed reasonable
to me.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If 'make install' was run with sufficient privileges, then the installed
builtins in gitexecdir, which are either hardlinked, symlinked, or copied,
would receive the user and group of whoever built git. With this commit
the initial hardlink or copy is done from the installation tree and not
the build tree to fix this.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After these changes, git-svnimport worked fine for me.
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
%z isn't available on all platforms in the date formatting
routines. Provide a workalike capability that should be
more portable.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Acked-by: Eric Wong <normalperson@yhbt.net>
Commit eed6ca7 caused a minor regression when it switched to using
tempfile() to generate the temporary compose file. Since tempfile()
creates the file at the time it generates the filename, zero-length
temporary files are being left behind unless --compose is used (in which
case the file is cleaned up).
This patch fixes the regression by not calling tempfile() to generate
the compose filename unless --compose is in use.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.bogomips.org/git-svn:
git-svn: read the dcommit url from the config file on a per remote basis
git-svn: fix delete+add branch tracking with empty files
git-svn: Create leading directories in create-ignore
When a particular changeset affects multiple depot paths, it
will appear multiple times in the output of "p4 changes".
Filter out the duplicates to avoid the extra empty commits that
this otherwise would create.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit url for dcommit is determined in the following order:
commandline option --commit-url
svn.commiturl
svn-remote.<name>.commiturl
svn-remote.<name>.url
Signed-off-by: Peter Oberndorfer <kumbayo84@arcor.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
Original bug report and test case by Björn Steinbrink.
Björn Steinbrink <B.Steinbrink@gmx.de> wrote:
> Hi Eric,
>
> seems that the empty symlink stuff gets confused about which revision to
> use when looking for the parent's file.
>
> r3 = f1a6fcf6b0a1c4a373d0b2b65a3d70700084f361 (tags/1.0.1)
> Found possible branch point: file:///home/doener/h/svn/tags/1.0 => file:///home/doener/h/svn/branches/1.0, 4
> Found branch parent: (1.0) 63ae640ba01014ecbb3df590999ed1fa5914545b
> Following parent with do_switch
> Successfully followed parent
> r5 = 26fcfef5bcced97ab74faf1af7341a2ae0d272aa (1.0)
> Found possible branch point: file:///home/doener/h/svn/branches/1.0 => file:///home/doener/h/svn/tags/1.0.1, 5
> Found branch parent: (tags/1.0.1) 26fcfef5bcced97ab74faf1af7341a2ae0d272aa
> Following parent with do_switch
> Scanning for empty symlinks, this may take a while if you have many empty files
> You may disable this with `git config svn.brokenSymlinkWorkaround false'.
> This may be done in a different terminal without restarting git svn
> Filesystem has no item: File not found: revision 3, path '/branches/1.0/file' at /usr/local/libexec/git-core/git-svn line 3318
>
> Note how it tries to look at revision 3 instead of revision 5 (which it
> correctly detected as the parent). The import succeeds when
> svn.brokenSymlinkWorkaround is set to false. Testcase below.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since SVN tracks empty directories and git does not, we can not assume
that the directory exists when creating .gitignore files.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
* 'for-junio' of git://source.winehq.org/~julliard/git/git:
Add a README in the contrib/emacs directory.
git.el: Improve the confirmation message on remove and revert.
git.el: Make sure that file lists are sorted as they are created.
This avoids a possibly redundant sort in git-update-status-files and
git-status-filenames-map, and allows callers to continue using the
list without having to copy it.
It also fixes the confusing success messages reported by Brent
Goodrick.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Talking about --date, one thing I wanted for the 1234567890 date was to
get things in the raw format. Sure, you get them with --pretty=raw, but it
felt a bit sad that you couldn't just ask for the date in raw format.
So here's a throw-away patch (meaning: I won't be re-sending it, because I
really don't think it's a big deal) to add "--date=raw". It just prints
out the internal raw git format - seconds since epoch plus timezone (put
another way: 'date +"%s %z"' format)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just saying that index.lock exists doesn't tell the user _what_ to do
to fix the problem. We should give an indication that it's normally
safe to delete index.lock after making sure git isn't running here.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current implementation only hyperlinks the first hash on
a given line of the commit message. It seems sensible to
highlight all of them if there are multiple, and it seems
plausible that there would be multiple even with a tidy line
length limit, because they can be abbreviated as short as 8
characters.
Benchmark:
I wanted to make sure that using the 'e' switch to the Perl regex
wasn't going to kill performance, since this is called once per commit
message line displayed.
In all three A/B scenarios I tried, the A and B yielded the same
results within 2%, where A is the version of code before this patch
and B is the version after.
1: View a commit message containing the last 1000 commit hashes
2: View a commit message containing 1000 lines of 40 dots to avoid
hyperlinking at the same message length
3: View a short merge commit message with a few lines of text and
no hashes
All were run in CGI mode on my sub-production hardware on a recent
clone of git.git. Numbers are the average of 10 reqests per second
with the first request discarded, since I expect this change to affect
primarily CPU usage. Measured with ApacheBench.
Note that the web page rendered was the same; while the new code
supports multiple hashes per line, there was at most one per line.
The primary purpose of scenarios 2 and 3 were to verify that the
addition of 1000 commit messages had an impact on how much of the time
was spent rendering commit messages. They were all within 2% of 0.80
requests per second (much faster).
So I think the patch has no noticeable effect on performance.
Signed-off-by: Marcel M. Cary <marcel@oak.homeunix.org>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At least for the author of this patch, the logic in system_path() was
too hard to understand. Using the function strip_path_suffix() documents
the idea of the code better.
The real change is to add the suffix "git", so that a runtime prefix will
be computed correctly even when the executable was called in /git/ as is
the case in msysGit (Windows insists to search the current directory
before the PATH when looking for an executable).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function strip_path_suffix() will try to strip a given suffix from
a given path. The suffix must start at a directory boundary (i.e. "core"
is not a path suffix of "libexec/git-core", but "git-core" is).
Arbitrary runs of directory separators ("slashes") are assumed identical.
Example:
strip_path_suffix("C:\\msysgit/\\libexec\\git-core",
"libexec///git-core", &prefix)
will set prefix to "C:\\msysgit" and return 0.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
tests: fix "export var=val"
Skip timestamp differences for diff --no-index
Documentation/git-push: --all, --mirror, --tags can not be combined
Some shells do not like "export var=val"; the right way to write
it is to do an assignment and then export just the variable name.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The improved error handling catches a bug in filter-branch when using
-d pointing to a path outside any git repository:
$ git filter-branch -d /tmp/foo master
fatal: Not a git repository (or any of the parent directories): .git
This error message comes from git for-each-ref in line 224. GIT_DIR is
set correctly by git-sh-setup (to the foo.git repository), but not
exported (yet).
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not make sense to provide multiple upstream branches to either
git pull --rebase, or to git rebase, so disallow both.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We display empty diffs for files whose timestamps have changed.
Usually, refreshing the index makes those empty diffs go away.
However, when not using the index they are not very useful and
there is no option to suppress them.
This forces on the skip_stat_unmatch option for diff --no-index,
suppressing any empty diffs. This option is also used for diffs
against the index when "diff.autorefreshindex" is set, but that
option does not apply to diff --no-index.
Signed-off-by: Michael Spang <mspang@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The underlying plumbing commands are not run with -z option, so the paths
returned from them need to be unquoted as needed.
Remove the now stale BUGS section from git-add documentaiton as suggested
by Teemu Likonen.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ward Wouts reports that git-svn barfed like this:
Unable to parse date: 2004-03-09T09:44:33.Z at /usr/bin/git-svn line 3995
The parse_svn_date sub expects there always are one or more digits after
the decimal point to record fractional seconds, but this example does not
and results in a failure like this.
The fix is based on the original fix by the reporter, further cleaned up.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
When a feature like "blame" is permitted to be overridden in the
repository configuration but it is not actually set in the repository,
a warning is emitted due to the undefined value of the repository
configuration, even though it's a perfectly normal condition.
Emitting warning is grounds for test failure in the gitweb test
script.
This error was caused by rewrite of git_get_project_config from using
"git config [<type>] <name>" for each individual configuration
variable checked to parsing "git config --list --null" output in
commit b201927 (gitweb: Read repo config using 'git config -z -l').
Earlier version of git_get_project_config was returning empty string
if variable do not exist in config; newer version is meant to return
undef in this case, therefore change in feature_bool was needed.
Additionally config_to_* subroutines were meant to be invoked only if
configuration variable exists; therefore we added early return to
git_get_project_config: it now returns no value if variable does not
exists in config. Otherwise config_to_* subroutines (config_to_bool
in paryicular) wouldn't be able to distinguish between the case where
variable does not exist and the case where variable doesn't have value
(the "[section] noval" case, which evaluates to true for boolean).
While at it fix bug in config_to_bool, where checking if $val is
defined (if config variable has value) was done _after_ stripping
leading and trailing whitespace, which lead to 'Use of uninitialized
value' warning.
Add test case for features overridable but not overriden in repo
config, and case for no value boolean configuration variable.
Signed-off-by: Marcel M. Cary <marcel@oak.homeunix.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While b259f09 made git-push output a better error message for 'git-push
--all --tags', this commit fixes the synopsis in the documentation.
Inconsistency spotted and fix suggested by Jari Aalto through
http://bugs.debian.org/502567
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gitk completion only shows --merge if MERGE_HEAD is present.
Do it the same way for git-log completion.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor options that are useful for more than one of them into a
variable used by the relevant completions. This has the effect of
adding the following options to git-log:
--branches --tags --remotes --first-parent --dense --sparse
--simplify-merges --simplify-by-decoration --first-parent
--no-merges
The following to git-shortlog:
--branches --tags --remotes --first-parent
And the following to gitk:
--branches --tags --remotes --first-parent --no-merges --max-count=
--max-age= --since= --after= --min-age= --until= --before= --dense
--sparse --full-history --simplify-merges --simplify-by-decoration
--left-right
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CGI::url() has some issues when rebuilding the script URL if the script
is a DirectoryIndex.
One of these issue is the inability to strip PATH_INFO, which is why
we had to do it ourselves.
Another issue is that the resulting URL cannot be used for the <base>
tag: it works if we're the DirectoryIndex at the root level, but not
otherwise.
We fix this by building the proper base URL ourselves, and improve the
comment about the need to strip PATH_INFO manually while we're at it.
Additionally t/t9500-gitweb-standalone-no-errors.sh had to be modified
to set SCRIPT_NAME variable (CGI standard states that it MUST be set,
and now gitweb uses it if PATH_INFO is not empty, as is the case for
some of tests in t9500).
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git svn' got some new subcommands and otions in the last couple of
months. This patch adds completion support for them.
In particular:
* 'fetch', 'clone', etc.: '--ignore-paths='
* 'init' and 'clone': '--prefix=', '--use-log-author',
'--add-author-from'
* 'dcommit': '--commit-url', '--revision'
* 'log': '--color'
* 'rebase': '--dry-run'
* 'branch', 'tag', 'blame', 'migrate' subcommands and their options
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Namely: '--commit', '--stat', '--no-squash', '--ff', '--no-ff'.
One might wonder why add options that specify the default behaviour
anyway (e.g. '--commit', '--no-squash', etc.). Users can override the
default with config options (e.g. 'branch.<name>.mergeoptions',
'merge.log'), but sometimes might still need the default behaviour.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the new svn root URL given with the svn-remote.<repo>.rewriteRoot config option
(or by the --rewrite-root option to 'git svn init') contains a username
(such as 'svn+ssh://username@example.com/repo'), find_by_url() cannot find
the repository URL, because the URL contained in the commit message does have
the username removed.
Signed-off-by: Dévai Tamás <devait@mailbox.sk>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While all of the strings passed to warning() are, in fact, literals, the
compiler doesn't recognize them as such because it doesn't see through
the loop used to iterate over them:
builtin-receive-pack.c: In function 'warn_unconfigured_deny':
builtin-receive-pack.c:247: warning: format not a string literal and no format arguments
builtin-receive-pack.c: In function 'warn_unconfigured_deny_delete_current':
builtin-receive-pack.c:273: warning: format not a string literal and no format arguments
Calm the compiler by adding easily recognizable format string literals.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ms/mailmap:
Move mailmap documentation into separate file
Change current mailmap usage to do matching on both name and email of author/committer.
Add map_user() and clear_mailmap() to mailmap
Add find_insert_index, insert_at_index and clear_func functions to string_list
Add mailmap.file as configurational option for mailmap location
After 753bc91 ("Remove the requirement opaquelocktoken uri scheme"),
lock tokens are in the URI forms in which they are received from the
server, eg. 'opaquelocktoken:', 'urn:uuid:'.
However, "start_put" (and consequently "start_move"), which attempts to
create a unique temporary file using the UUID of the lock token,
inadvertently uses the lock token in its URI form. These file
operations on the server may not be successful (specifically, in
Windows), due to the colon ':' character from the URI form of the lock
token in the file path.
This patch uses a hash of the lock token instead, guaranteeing only
"safe" characters (a-f, 0-9) are used in the file path.
The token's hash is generated when the lock token is received from the
server in handle_new_lock_ctx, minimizing the number of times of
hashing.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 6564828 (git-send-email: Generalize auto-cc recipient
mechanism., 2007-12-25) we can suppress automatic Cc generation
separately for each of the possible address sources. However,
--suppress-cc=sob suppressed both SOB lines and body (but not header)
Cc lines, contrary to the name.
Change --suppress-cc=sob to mean only SOB lines, and add separate
choices 'bodycc' (body Cc lines) and 'body' (both 'sob' and 'bodycc').
The option --no-signed-off-by-cc now acts like --suppress-cc=sob,
which is not backwards compatible but matches the name of the option.
Also update the documentation and add a few tests.
Original patch by me. Revised by Thomas Rast, who contributed the
documentation and test updates.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git format-patch is given multiple --cc arguments, it generates a
Cc header that looks like:
Cc: first@example.com,
second@example.com,
third@example.com
Before this commit, send-email was unable to handle such a message as it
did not handle folded header lines, nor multiple recipients in a Cc
line.
This patch:
- Unfolds header lines by pre-processing the header before extracting
any of its fields.
- Handles Cc lines with multiple recipients.
- Adds use of Mail::Address if available for splitting Cc line and
the "Who should the emails be sent to?" prompt", with fall back to
existing split_addrs() function.
- Tests the new functionality and adds two tests for detecting whether
"From:" appears correctly in message body when patch author differs
from patch sender.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email is supposed to be able to run from outside a repo. This
ability was broken by commits caf0c3d6 (make the message file name more
specific) and 5df9fcf6 (interpret unknown files as revision lists).
This commit provides a fix for both.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend t1500 with tests of 'git rev-parse --git-dir' when invoked from
other directories of the repository or the work tree.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 72183cb2 (Fix gitdir detection when in subdir of
gitdir, 2009-01-16) added a test to 't1501-worktree' to check the
behaviour of 'git rev-parse --git-dir' in a special case. However,
t1501 is about testing separate work tree setups, and not about basic
'rev-parse' functionality, which is tested in t1500-rev-parse.
Therefore, this patch moves that test to t1500.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a section about how to shrink a repository's size after running
git-filter-branch to remove large blobs from history.
This comes up every week or so on IRC, and the commands required to
handle every case are not very newbie-friendly, so hopefully writing
them down somewhere leads to fewer questions.
It may seem contradictory to document fallbacks for older Gits in
newer docs, but we want to point people at this as a FAQ answer, and
they will frequently not have the newest version installed.
Thanks to Björn Steinbrink and Junio C Hamano for comments and
corrections.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, "git gc --no-prune" will not prune any loose (and
dangling) object, and "git gc --prune=5.minutes.ago" will prune
all loose objects older than 5 minutes.
This patch benefitted from suggestions by Thomas Rast and Jan Krï¿œger.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1.6.2 will have @{-1} syntax advertised as "usable anywhere you can use
a branch name". However, "git merge @{-1}" did not work.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the new "@{-1} syntax to refer to the previous branch to "git
branch". After looking at somebody's faulty patch series on a topic
branch too long, if you decide it is not worth merging, you can just say:
$ git checkout master
$ git branch -D @{-1}
to get rid of it without having to type the name of the topic you now hate
so much for wasting a lot of your time.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit afe5d3d5 introduced a safety valve to symbolic-ref to
disallow installing an invalid HEAD. It was accompanied by
b229d18a, which changed validate_headref to require that
HEAD contain a pointer to refs/heads/ instead of just refs/.
Therefore, the safety valve also checked for refs/heads/.
As it turns out, topgit is using refs/top-bases/ in HEAD,
leading us to re-loosen (at least temporarily) the
validate_headref check made in b229d18a. This patch does the
corresponding loosening for the symbolic-ref safety valve,
so that the two are in agreement once more.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git log --abbrev-commit' added an ellipsis to all commit names that
were abbreviated. This was particularly annoying if you wanted to
cut&paste the sha1 from the terminal, since selecting by word would
pick up '...' too.
So use find_unique_abbrev() instead of diff_unique_abbrev() in all
log-related commit sha1 printing routines, and also change the
formatting of the 'Merge: parent1 parent2' line output via
pretty_print_commit().
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After "cloning from an empty repository", we have a configuration to
describe the remote's URL and the default ref mappings, but we lack the
branch configuration for the default branch we create on our end,
"master".
It is likely that the empty repository we cloned from will point the
default "master" branch with its HEAD, so prepare the local configuration
to match.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is more than one file that are changed, running git diff with
GIT_EXTERNAL_DIFF incorrectly diagnoses an programming error and dies.
The check introduced in 479b0ae (diff: refactor tempfile cleanup handling,
2009-01-22) to detect a temporary file slot that forgot to remove its
temporary file was inconsistent with the way the codepath to remove the
temporary to mark the slot that it is done with it.
This patch fixes this problem and adds a test case for it.
Signed-off-by: Nazri Ramliy <ayiehere@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"\" was treated differently in exclude rules depending on whether a
wildcard match was done. For wildcard rules, "\" was de-escaped in
fnmatch, but this was not done for other rules since they used strcmp
instead. A file named "#foo" would not be excluded by "\#foo", but would
be excluded by "\#foo*".
We now treat all rules with "\" as wildcard rules.
Another solution could be to de-escape all non-wildcard rules as we
read them, but we would have to do the de-escaping exactly as fnmatch
does it to avoid inconsistencies.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Prepare for 1.6.1.4.
Make repack less likely to corrupt repository
fast-export: ensure we traverse commits in topological order
Clear the delta base cache if a pack is rebuilt
Conflicts:
RelNotes
* maint-1.6.0:
Make repack less likely to corrupt repository
fast-export: ensure we traverse commits in topological order
Clear the delta base cache if a pack is rebuilt
Some platforms refuse to rename a file that is open. When repacking an
already packed repository without adding any new object, the resulting
pack will contain the same set of objects as an existing pack, and on such
platforms, a newly created packfile cannot replace the existing one.
The logic detected this issue but did not try hard enough to recover from
it. Especially because the files that needs renaming come in pairs, there
potentially are different failure modes that one can be renamed but the
others cannot. Asking manual recovery to end users were error prone.
This patch tries to make it more robust by first making sure all the
existing files that need to be renamed have been renamed before
continuing, and attempts to roll back if some failed to rename.
This is based on an initial patch by Robin Rosenberg.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-export will only list as parents those commits which have already
been traversed (making it appear as if merges have been squashed if not
all parents have been traversed). To avoid this silent squashing of
merge commits, we request commits in topological order.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9273b56 (filter-branch: Fix fatal error on bare repositories, 2009-02-03)
fixed a missing check of return status from an underlying command in
git-filter-branch, but there still are places that do not check errors.
For example, the command does not pay attention to the exit status of the
command given by --commit-filter. It should abort in such a case.
This attempts to fix all the remaining places that fails to checks errors.
In two places, I've had to break apart pipelines in order to check the
error code for the first stage of the pipeline, as discussed here:
http://kerneltrap.org/mailarchive/git/2009/1/28/4835614
Feedback on this patch was provided by Johannes Sixt, Johannes Schindelin
and Junio C Hamano. Thomas Rast helped with pipeline error handling.
Signed-off-by: Eric Kidd <git@randomhacks.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the show_new_revisions function, the original code:
git rev-parse --not --branches | grep -v $(git rev-parse $refname) |
isn't quite right since one can create a new branch and push it
without any new commits. In that case, two refs will have the same
sha1 but both would get filtered by the 'grep'. In the end, we'll
show ALL the history which is not what we want. Instead, we should
list the branches by name and remove the branch being updated and THEN
pass that list through rev-parse.
Revised as suggested by Jakub Narebski and Junio C Hamano to use
git-for-each-ref instead of git-branch. (Thanks!)
Signed-off-by: Pat Notz <pknotz@sandia.gov>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is some risk that re-opening a regenerated pack file with
different offsets could leave stale entries within the delta base
cache that could be matched up against other objects using the same
"struct packed_git*" and pack offset.
Throwing away the entire delta base cache in this case is safer,
as we don't have to worry about a recycled "struct packed_git*"
matching to the wrong base object, resulting in delta apply
errors while unpacking an object.
Suggested-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.bogomips.org/git-svn:
test case for regression caused by git-svn empty symlink fix
git-svn: fix broken symlink workaround when switching branches
git-svn: Print revision while searching for earliest use of path
git-svn: abstract out a block into new method other_gs()
git-svn: allow disabling expensive broken symlink checks
057e713 (Warn use of "origin" when remotes/origin/HEAD is dangling,
2009-02-08) tried to warn dangling refs/remotes/origin/HEAD only when
"origin" was used to refer to it. There was one corner case a symref is
expected to be dangling and this warning is unwarranted: HEAD in an empty
repository.
This squelches the warning for this special case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dbc6c74d08 "git-svn: handle empty
files marked as symlinks in SVN" caused a regression in an unusual case
where a branch has been created in SVN, later deleted and then created
again from another branch point and the original branch point had empty
files not in the new branch. In some cases git svn fetch will then fail
while trying to fetch the empty file from the wrong SVN revision.
This adds a test case that reproduces the issue.
[ew: added additional test to ensure file was created correctly
made test file executable ]
Signed-off-by: Anton Gyllenberg <anton@iki.fi>
Acked-by: Eric Wong <normalperson@yhbt.net>
Thanks to Anton Gyllenberg <anton@iki.fi> for the bug report
(and testcase in the following commit):
> Commit dbc6c74d08 "git-svn:
> handle empty files marked as symlinks in SVN" caused a
> regression in an unusual case where a branch has been created
> in SVN, later deleted and then created again from another
> branch point and the original branch point had empty files not
> in the new branch. In some cases git svn fetch will then fail
> while trying to fetch the empty file from the wrong SVN
> revision.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
When initializing a git-svn repository from a Subversion repoository,
it is common to be interested in a path which did not exist in the
initial commit to Subversion. In a large repository, the initial fetch
may take some looking for the earliest existence of the path time while
the user receives no additional feedback. Print the highest revision
number scanned thus far to let the user know something is still
happening.
Signed-off-by: Deskin Miller <deskinm@umich.edu>
We will be adding a more places that need to find git revisions
corresponding to new parents, so abstract out this section into a new
method.
Signed-off-by: Yuval Kogman <nothingmuch@woobling.org>
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
[ew: minor formatting changes]
Since dbc6c74d08, git-svn has had
an expensive check for broken symlinks that exist in some
repositories. This leads to a heavy performance hit on
repositories with many empty blobs that are not supposed to be
symlinks.
The workaround is enabled by default; and may be disabled via:
git config svn.brokenSymlinkWorkaround false
Reported by Markus Heidelberg.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
cc0e6c5 (Handle return code of parse_commit in revision machinery,
2007-05-04) attempted to tighten error checking in the revision machinery,
but it wasn't enough. When get_revision_1() was asked for the next commit
to return, it tries to read and simplify the parents of the commit to be
returned, but an error while doing so was silently ignored and reported as
a truncated history to the caller instead.
This resulted in an early end of "git log" output or a pack that lacks
older commits from "git pack-objects", without any error indication in the
exit status from these commands, even though the underlying parse_commit()
issues an error message to the end user.
Note that the codepath in add_parents_list() that paints parents of an
UNINTERESTING commit UNINTERESTING silently ignores the error when
parse_commit() fails; this is deliberate and in line with aeeae1b
(revision traversal: allow UNINTERESTING objects to be missing,
2009-01-27).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a companion patch to the recent 3d95d92 (receive-pack: explain
what to do when push updates the current branch, 2009-01-31).
Deleting the current branch from a remote will result in the next clone
from it not check out anything, among other things. It also is one of the
cause that makes remotes/origin/HEAD a dangling symbolic ref. This patch
still allows the traditional behaviour but with a big warning, and promises
that the default will change to 'refuse' in a future release.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous one squelched the diagnositic message we used to issue every
time we enumerated the refs and noticed a dangling ref. This adds the
warning back to the place where the user actually attempts to use it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you prune from the remote "frotz" that deleted the ref your tracking
branch remotes/frotz/HEAD points at, the symbolic ref will become
dangling. We used to detect this as an error condition and issued a
message every time refs are enumerated.
This stops the error message, but moves the warning to "remote prune".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
026fa0d (Move computation of absolute paths from Makefile to runtime in
preparation for RUNTIME_PREFIX, 2009-01-18) broke the installation of html
documentation. A relative htmldir is given to Documentation/Makefile and
html documentations are installed in a subdirectory of "Documentation" in
the source tree.
Fix this by not exporting htmldir from Makefile; this allows
Documentation/Makefile to compute the htmldir from the prefix.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
index_is_dirty() in builtin-revert.c checks if the index is dirty.
This patch generalizes this function to check if the index differs
from a revision, i.e. the former index_is_dirty() behavior can now be
achieved by index_differs_from("HEAD", 0).
The second argument "diff_flags" allows to set further diff option
flags like DIFF_OPT_IGNORE_SUBMODULES. See DIFF_OPT_* macros in diff.h
for a list.
index_differs_from() seems to be useful for more than builtin-revert.c,
so it is moved into diff-lib.c and also used in builtin-commit.c.
Yet to mention:
- "rev.abbrev = 0;" can be safely removed.
This has no impact on performance or functioning of neither
setup_revisions() nor run_diff_index().
- rev.pending.objects is free()d because this fixes a leak.
(Also see 295dd2ad "Fix memory leak in traverse_commit_list")
Mentored-by: Daniel Barkalow <barkalow@iabervon.org>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some filenames in the Makefile got out of order.
This patch resorts the filename lists which makes it easier
to grasp that it is sorted and that this should be kept.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests checked for failure by hand without using test_must_fail (they
probably predate the shell function).
When we know the desired outcome, explicitly check for it, instead of
checking if the result does not match one possible incorrect outcome.
E.g. if you expect a push to be refused, you do not test if the result is
different from what was pushed. Instead, make sure that the ref did not
before and after the push.
The test sequence chdir'ed around and any failure at one point could have
started the next test in an unexpected directory. Fix this problem by
using subshells as necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-1.6.0-path-normalize:
Remove unused normalize_absolute_path()
Test and fix normalize_path_copy()
Fix GIT_CEILING_DIRECTORIES on Windows
Move sanitary_path_copy() to path.c and rename it to normalize_path_copy()
Make test-path-utils more robust against incorrect use
Otherwise we may reuse the same memory address for a totally
different "struct packed_git", and a previously cached object from
the prior occupant might be returned when trying to unpack an object
from the new pack.
Found-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous check in git-web--browse for /bin/start used test -n
/bin/start, which was always true. This lead to "start" being tried
first in the browser list. On systems with upstart installed, "start"
exists and might be in the PATH, but it makes a poor choice for a web
browser. Instead, test that /bin/start exists and is executable.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a gitweb configuration variable $prevent_xss that disables features
to prevent content in repositories from launching cross-site scripting
(XSS) attacks in the gitweb domain. Currently, this option makes gitweb
ignore README.html (a better solution may be worked out in the future)
and serve a blob_plain file of an untrusted type with
"Content-Disposition: attachment", which tells the browser not to show
the file at its original URL.
The XSS prevention is currently off by default.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although it does not matter in general it is handled different by
"git clone", as it removes it to make the "humanish" name of the
new repository.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After invoking git add -p I always got the warnings:
Use of uninitialized value $_[3] in exec at Git.pm line 1282.
Use of uninitialized value $args[2] in join or string at Git.pm line 1264.
A bisect showed that these warnings occur in a301973 "add -p: print errors
in separate color" the first time.
They can be reproduced by setting color.ui (or color.interactive) to "auto"
and unsetting color.interactive.help and color.interactive.error.
I am using Perl 5.10.0.
The reason of the warning is that color.interactive.error defaults to
color.interactive.help which defaults to nothing in the specific codepath.
It defaults to 'red bold' some lines above which could lead to the wrong
assumption that it always defaults to 'red bold' now.
This patch lets it default to 'red bold', blowing the warnings away.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Acked-By: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before d467a52 ("Make '--decorate' set an explicit 'show_decorations'
flag", Nov 3 2008), commit decorations were shown whenever they exist, and
distances stored in them by "git rev-list --bisect-all" were automatically
shown. d467a52 changed the rule so that commit decorations are not shown
unless rev_info explicitly asks to, with its show_decorations bit, but
forgot that the ones "git rev-list --bisect-all" adds need to be shown.
This patch fixes this old breakage.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include it directly from git-shortlog.txt, and refer
to it from pretty-format.txt.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
map_user() allows to lookup and replace both email and
name of a user, based on a new style mailmap file.
The possible mailmap definitions are now:
proper_name <commit_email> # Old style
<proper_email> <commit_email> # New style
proper_name <proper_email> <commit_email> # New style
proper_name <proper_email> commit_name <commit_email> # New style
map_email() operates the same as before, with the
exception that it also will to try to match on a name
passed in through the name return buffer.
clear_mailmap() is needed to now clear the more complex
mailmap structure.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
string_list_find_insert_index() and string_list_insert_at_index()
enables you to see if an item is in the string_list, and to
insert at the appropriate index in the list, if not there.
This is usefull if you need to manipulate an existing item,
if present, and insert a new item if not.
Future mailmap code will use this construct to enable
complex (old_name, old_email) -> (new_name, new_email)
lookups.
The string_list_clear_func() allows to call a custom
cleanup function on each item in a string_list, which is
useful is the util member points to a complex structure.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to augment the repo mailmap file, and to use
mailmap files elsewhere than the repository root. Meaning
that the entries in mailmap.file will override the entries
in "./.mailmap", should they match.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make SHA-1 regexp to be turned into hyperlink (the SHA-1 committag)
to match word boundary at the beginning and the end. This way we
reduce number of false matches, for example we now don't match
0x74a5cd01 which is hex decimal (for example memory address),
but is not SHA-1.
Suggested-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, when you called
git submodule some/bogus/path
Git would silently ignore the path, without warning the user about the
likely mistake. Now it does.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tab completion makes it easy to add a trailing slash to a submodule path.
As it is completely clear what the user actually wanted to say, be nice
and strip that slash at the end.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is now superseded by normalize_path_copy().
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the test-path-utils utility to invoke normalize_path_copy()
instead of normalize_absolute_path() because the latter is about to be
removed.
The test cases in t0060 are adjusted in two regards:
- normalize_path_copy() more often leaves a trailing slash in the result.
This has no negative side effects because the new user of this function,
longest_ancester_length(), already accounts for this behavior.
- The function can fail.
The tests uncover a flaw in normalize_path_copy(): If there are
sufficiently many '..' path components so that the root is reached, such as
in "/d1/s1/../../d2", then the leading slash was lost. This manifested
itself that (assuming there is a repository at /tmp/foo)
$ git add /d1/../tmp/foo/some-file
reported 'pathspec is outside repository'. This is now fixed.
Moreover, the test case descriptions of t0060 now include the test data and
expected outcome.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using git with GIT_CEILING_DIRECTORIES crashed on Windows due to a failed
assertion in normalize_absolute_path(): This function expects absolute
paths to start with a slash, while on Windows they can start with a drive
letter or a backslash.
This fixes it by using the alternative, normalize_path_copy() instead,
which can handle Windows-style paths just fine.
Secondly, the portability macro PATH_SEP is used instead of expecting
colons to be used as path list delimiter.
The test script t1504 is also changed to help MSYS's bash recognize some
program arguments as path list. (MSYS's bash must translate POSIX-style
path lists to Windows-style path lists, and the heuristic did not catch
some cases.)
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function and normalize_absolute_path() do almost the same thing. The
former already works on Windows, but the latter crashes.
In subsequent changes we will remove normalize_absolute_path(). Here we
make the replacement function reusable. On the way we rename it to reflect
that it does some path normalization. Apart from that this is only moving
around code.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, this test utility happily returned with exit code 0 if garbage
was thrown at it. Now it reports failure if an unknown function name was
given on the command line.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the callback function invoked from read_tree_recursive() returns
the value `READ_TREE_RECURSIVE` for a gitlink entry, the traversal will
now continue into the tree connected to the gitlinked commit. This
functionality can be used to allow inter-repository operations, but
since the current users of read_tree_recursive() does not yet support
such operations, they have been modified where necessary to make sure
that they never return READ_TREE_RECURSIVE for gitlink entries (hence
no change in behaviour should be introduces by this patch alone).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/filter-branch-submodule:
filter-branch: do not consider diverging submodules a 'dirty worktree'
filter-branch: Fix fatal error on bare repositories
vc-git is distributed with Emacs since version 22.2, and is maintained
in the Emacs CVS tree. This file is obsolete and causes trouble for
people who want to add contrib/emacs to their load-path.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
This allows using fill-paragraph on the log message without
interference from the various header fields.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Support for cherry-picking and reverting commits, with automatic
formatting of the commit log message. Bound to C-c C-p and C-c C-v
respectively.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Prompts for a branch name, create a new branch at HEAD and switch to
it. Bound to C-c C-b by default.
Based on a patch by Rémi Vanicat <vanicat@debian.org>.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Prompts for a branch name and checks it out. Bound to C-c C-o by
default.
Based on a patch by Rémi Vanicat <vanicat@debian.org>.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
In cd_to_toplevel, instead of 'cd $(unset PWD; /bin/pwd)/$path'
use 'cd -P $path'. The "-P" option yields a desirable similarity to
C chdir.
While the "-P" option may be slightly less commonly supported than
/bin/pwd, it is more concise, better tested, and less error prone.
I've already added the 'unset PWD' to fix the /bin/pwd solution on
BSD; there may be more edge cases out there.
This still passes all the same test cases in t5521-pull-symlink.sh and
t2300-cd-to-toplevel.sh, even before updating them to use 'pwd -P'.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git submodule update --no-fetch makes it possible to use git submodule
update in complete offline mode by not fetching new revisions.
This does make sense in the following setup:
* There is an unstable and a stable branch in the super/master repository.
* The submodules might be at different revisions in the branches.
* You are at some place without internet connection ;)
With this patch it is now possible to change branches and update
the submodules to be at the recorded revision without online access.
Another advantage is that with -N the update operation is faster, because fetch is checking for new updates even if there was no fetch/pull on the super/master repository since the last update.
Signed-off-by: Fabian Franz <git@fabian-franz.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
eval{use...} is no good because the 'use' is evaluated at compile
time, so manually 'require' it. We need to forward declare the
functions we use, otherwise Perl raises a compilation error.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-remote-remove-mirror:
builtin-remote: make rm operation safer in mirrored repository
builtin-remote: make rm() use properly named variable to hold return value
* js/notes:
git-notes: fix printing of multi-line notes
notes: fix core.notesRef documentation
Add an expensive test for git-notes
Speed up git notes lookup
Add a script to edit/inspect notes
Introduce commit notes
Conflicts:
pretty.c
* rc/http-push:
http-push: wrap signature of get_remote_object_url
http-push: add back underscore separator before lock token
http-push.c: get_remote_object_url() is only used under USE_CURL_MULTI
http-push: refactor request url creation
* cb/mergetool:
mergetool: fix running mergetool in sub-directories
mergetool: Add a test for running mergetool in a sub-directory
mergetool: respect autocrlf by using checkout-index
At the end of filter-branch in a non-bare repository, the work tree is
updated with "read-tree -m -u HEAD", to carry the change forward in case
the current branch was rewritten. In order to avoid losing any local
change during this step, filter-branch refuses to work when there are
local changes in the work tree.
This "read-tree -m -u HEAD" operation does not affect what commit is
checked out in a submodule (iow, it does not touch .git/HEAD in a
submodule checkout), and checking if there is any local change to the
submodule is not useful.
Staged submodules _are_ considered to be 'dirty', however, as the
"read-tree -m -u HEAD" could result in loss of staged information
otherwise.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Print interaction error messages in color.interactive.error, which
defaults to the value of color.interactive.help.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use Term::ReadKey, if available and enabled with interactive.singlekey,
to let the user answer add -p's prompts by pressing a single key. We're
not doing the same in the main 'add -i' interface because file selection
etc. may expect several characters.
Two commands take an argument: 'g' can easily cope since it'll just
offer a choice of chunks. '/' now (unconditionally, even without
readkey) offers a chance to enter a regex if none was given.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1) Instead of requesting OLD_ICONV on all Mac OS X versions except for 10.5
(which will break when 10.6 is released), exlicitly request it for versions
older than 10.5.
2) NO_STRLCPY is not needed since Mac OS X 10.2. Noticed by Benjamin Kramer.
Note that uname -r returns the underlying Darwin version, which can be mapped
to Mac OS X version at http://www.opensource.apple.com/darwinsource/
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main Makefile defines gitexecdir and template_dir without trailing
slash. config.mak.in should do the same to be consistent.
Signed-off-by: Pascal Obry <pascal@obry.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The installation rules wanted to differentiate between a template_dir that
is given as an absolute path (e.g. /usr/share/git-core/templates) and a
relative one (e.g. share/git-core/templates) but it was done by checking
if $(abspath $(template_dir)) and $(template_dir) yield the same string.
This was wrong in at least two ways.
* The user can give template_dir with a trailing slash from the command
line to invoke make or from the included config.mak. A directory path
ought to mean the same thing with or without such a trailing slash but
use of $(abspath) means an absolute path with a trailing slash fails
the test.
* Versions of GNU make older than 3.81 do not have $(abspath) to begin
with.
This changes the detection logic to see if the given path begins with a
slash.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the git-core package was renamed to git, git help -w was still looking
for files in /usr/share/doc/git-core-$VERSION instead of
/usr/share/doc/git-$VERSION.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git blame misaligns output if a author's name has a differing display width and
strlen; for instance, an accented Latin letter that takes two bytes to encode
will cause the rest of the line to be shifted to the left by one. To fix this,
use utf8_strwidth instead of strlen (and compute the padding ourselves, since
printf doesn't know about UTF-8).
Signed-off-by: Geoffrey Thomas <geofft@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I'm about to use this pattern more than once, so make it a common function.
Signed-off-by: Geoffrey Thomas <geofft@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This rewrites the example part of the bundle doucmentation to follow
the suggestion made by Junio during a recent discussion (gmane 108030).
Instead of just showing different ways to create and use bundles in a
disconnected fashion, the rewritten example first shows the simplest
"full cycle" of sneakernet workflow, and then introduces various
variations.
The words are mostly taken from Junio's outline. I only reformatted
them and proofread to make sure the end result flows naturally.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a tool 'git-resurrect.sh <branch>' that tries to find traces of
the <branch> in the HEAD reflog and, optionally, all merge commits in
the repository. It can then resurrect the branch, pointing it at the
most recent of all candidate commits found.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
urls.txt: document optional port specification in git URLS
builtin-mv.c: check for unversionned files before looking at the destination.
Add a testcase for "git mv -f" on untracked files.
Missing && in t/t7001.sh.
* maint-1.6.0:
builtin-mv.c: check for unversionned files before looking at the destination.
Add a testcase for "git mv -f" on untracked files.
Missing && in t/t7001.sh.
The previous code was failing in the case where one moves an
unversionned file to an existing destination, with mv -f: the
"existing destination" was checked first, and the error was cancelled
by the force flag.
We now check the unrecoverable error first, which fixes the bug.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this, the exit status is only the one of the last line.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote rm <repo>" happily removes non-remote refs and their reflogs.
This may be okay if the repository truely is a mirror, but if the user
had done "git remote add --mirror <repo>" by accident and was just
undoing their mistake, then they are left in a situation that is
difficult to recover from.
After this commit, "git remote rm" skips over non-remote refs. The user
is advised on how remove branches using "git branch -d", which itself
has nice safety checks wrt to branch removal lacking from "git remote rm".
Non-remote non-branch refs are skipped silently.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user hit Ctrl-D (EOF) while the script was in 'go to hunk?'
mode, it threw an undefined variable error. Explicitly test for EOF
and have it re-enter the goto prompt loop.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
57886bc (git-add -i/-p: Change prompt separater from slash to comma,
2008-11-27) changed the prompt separator to ',', but forgot to adapt
the 'g' (goto) command.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
User-manual: "git stash <comment>" form is long gone
add test-dump-cache-tree in Makefile
fix typo in Documentation
apply: fix access to an uninitialized mode variable, found by valgrind
Conflicts:
Makefile
* maint-1.6.0:
User-manual: "git stash <comment>" form is long gone
add test-dump-cache-tree in Makefile
fix typo in Documentation
apply: fix access to an uninitialized mode variable, found by valgrind
The signature of get_remote_object_url stands at 96 characters (as
pointed out by Dscho); this patch wraps it so that it conforms to the
80 characters guideline.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
817d14a (http-push: refactor request url creation, 2009-01-31) removed the
underscore separator between the object path and the appended lock token.
This patch adds it back.
This would be keeping in line with the aforementioned patch's objective
of refactoring, without changing the behaviour and effect, of the code.
This would also be useful for testing if the lock token has been
indeed appended to the object url.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These days you must explicitly say "git stash save <comment>".
Signed-off-by: William Pursell <bill.pursell@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
5c5ba73 (Makefile: Use generic rule to build test programs,
2007-05-31) tried to use generic rule to build test programs, but it
misses the file 'dump-cache-tree.c', since its name is not prefixed by
'test-'. This commit solves this little problem by renaming this file
instead of carrying out an explicit rule in Makefile.
Signed-off-by: Guanqun Lu <guanqun.lu@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a bit of code to __git_ps1 that lets it append '*' to the branch
name if there are any unstaged changes, and '+' if there are any
staged changes.
Since this is a rather expensive operation and will force a lot of
data into the cache whenever you first enter a repository, you have to
enable it manually by setting GIT_PS1_SHOWDIRTYSTATE to a nonempty
value. The configuration variable bash.showDirtyState can then be
used to disable it again for some repositories.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'tpatch' was initialized successfully, st_mode was already taken
from the previous diff. We should not try to override it with data
from an lstat() that was never called.
This is a companion patch to 7a07841(git-apply: handle a patch that
touches the same path more than once better).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git filter-branch is run on a bare repository, it prints out a fatal
error message:
$ git filter-branch branch
Rewrite 476c4839280c219c2317376b661d9d95c1727fc3 (9/9)
WARNING: Ref 'refs/heads/branch' is unchanged
fatal: This operation must be run in a work tree
Note that this fatal error message doesn't prevent git filter-branch from
exiting successfully. (Why doesn't git filter-branch actually exit with an
error when a shell command fails? I'm not sure why it was designed this
way.)
This error message is caused by the following section of code at the end of
git-filter-branch.sh:
if [ "$(is_bare_repository)" = false ]; then
unset GIT_DIR GIT_WORK_TREE GIT_INDEX_FILE
test -z "$ORIG_GIT_DIR" || {
GIT_DIR="$ORIG_GIT_DIR" && export GIT_DIR
}
... elided ...
git read-tree -u -m HEAD
fi
The problem is the call to $(is_bare_repository), which is made before
GIT_DIR and GIT_WORK_TREE are restored. This call always returns "false",
even when we're running in a bare repository. But this means that we will
attempt to call 'git read-tree' even in a bare repository, which will fail
and print an error.
This patch modifies git-filter-branch.sh to restore the original
environment variables before trying to call is_bare_repository.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brian Gernhardt noticed that t3411 was broken recently on case insensitive
filesystems.
0088496 (test-lib.sh: introduce test_commit() and test_merge() helpers,
2009-01-27) used a tag and a file with the same name, only different in
case, and converted many existing tests that needed only a file (or a
tag).
Some tests may want to refer to a rev or a file, but on a filesystem that
loses cases, referring to either without disambiguation mark ("--") on the
command line now triggers an error (t3411 was the only one such test).
Fix it by using a filename that is different from the tagname each step
creates.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"i" is a loop counter and should not be used to hold a return value; use
"result" instead which is consistent with the rest of builtin-remote.c.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2182896 (t3412: clean up GIT_EDITOR usage, 2009-01-30) tried to clean up
the script's use of GIT_EDITOR, but it can further be simplified, because
that is how test-lib.sh sets things up already.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes "git push" issue a more detailed instruction when a user pushes
into the current branch of a non-bare repository without having an
explicit configuration set to receive.denycurrentbranch. In such a case,
it will also tell the user that the default will change to refusal in a
future version of git.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of printing the help menu, this will print "No next hunk" and then
process the given hunk again.
Signed-off-by: William Pursell <bill.pursell@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command allows the user to skip hunks that don't match the specified
regex.
Signed-off-by: William Pursell <bill.pursell@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise the find command '/' soon to be introduced will be hard to see.
Signed-off-by: William Pursell <bill.pursell@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace all 'git log --graph' calls for history verification with the
combination of 'git log ...| git name-rev' first introduced by a6c7a27
(rebase -i: correctly remember --root flag across --continue,
2009-01-26). This should be less susceptible to format changes than
the --graph code.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One had to configure gitweb for it to find static files (stylesheets,
images) when using path_info URLs. Now that it is not necessary
thanks to adding BASE element to HTML head if needed, update README to
reflect this fact.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
currently for cases like
From: A U Thor <a.u.thor@example.com> (Comment)
mailinfo extracts the following 'Author:' field:
Author: A U Thor (Comment)
^^
which has two extra spaces left in there after removed email part.
I think this is wrong so here is a fix.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ks/maint-mailinfo-folded:
mailinfo: tests for RFC2047 examples
mailinfo: add explicit test for mails like '<a.u.thor@example.com> (A U Thor)'
mailinfo: 'From:' header should be unfold as well
mailinfo: correctly handle multiline 'Subject:' header
* sp/runtime-prefix:
Windows: Revert to default paths and convert them by RUNTIME_PREFIX
Compute prefix at runtime if RUNTIME_PREFIX is set
Modify setup_path() to only add git_exec_path() to PATH
Add calls to git_extract_argv0_path() in programs that call git_config_*
git_extract_argv0_path(): Move check for valid argv0 from caller to callee
Refactor git_set_argv0_path() to git_extract_argv0_path()
Move computation of absolute paths from Makefile to runtime (in preparation for RUNTIME_PREFIX)
* jk/signal-cleanup:
t0005: use SIGTERM for sigchain test
pager: do wait_for_pager on signal death
refactor signal handling for cleanup functions
chain kill signals for cleanup functions
diff: refactor tempfile cleanup handling
Windows: Fix signal numbers
git difftool listed some candidates for mergetools twice, depending on
the environment.
This slightly changes the behavior when both KDE_FULL_SESSION and
GNOME_DESKTOP_SESSION_ID are set at the same time; in such a case
meld is used in favor of kdiff3 (the old code favored kdiff3 in such a
case), but it should not matter in practice.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce two helper functions append_remote_object_url() and
get_remote_object_url() and use them to remove various places
that allocate and format the URL by hand. These functions generate
a URL that point at the fan-out directory inside the remote object
store (e.g. http://host/path/to/repo/objects/a1/) or at an individual
loose object file.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parameter n of unpack_callback() can have a value of up to
MAX_UNPACK_TREES. The check at the top of unpack_trees() (its only
(indirect) caller) makes sure it cannot exceed this limit.
unpack_callback() passes it and the array src to unpack_nondirectories(),
which has this loop:
for (i = 0; i < n; i++) {
/* ... */
src[i + o->merge] = o->df_conflict_entry;
o->merge can be 0 or 1, so unpack_nondirectories() potentially accesses
the array src at index MAX_UNPACK_TREES. This patch makes it big enough.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous fix to mergetool to use checkout-index instead of cat-file
broke running mergetool anywhere except the root of the repository.
This fixes it by using the correct relative paths for temporary files
and index paths.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
a6c7a27 (rebase -i: correctly remember --root flag across --continue,
2009-01-26) introduced a more portable GIT_EDITOR usage, but left the
old tests unchanged.
Since we never use the editor (all tests run the rebase script as
proposed by rebase -i), just disable it outright, which simplifies the
tests.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CVS server was running the hook before the update action was
actually done. This performs the update before the hook is called.
The original commit that introduced the current incorrect behavior
was 394d66d "git-cvsserver runs hooks/post-update". The error in
ordering of the hook call appears to have gone unnoticed, but since
git-cvsserver is supposed to emulate receive-pack, it stands to
reason that the hook should be run *after* the update. Since this
behavior is inconsistent with recieve-pack, users are either:
1) not using post-update hooks with git-cvsserver;
2) using post-update hooks that don't care whether they are
called before or after the actual update occurs;
3) using post-update hooks *only* with git-cvsserver, and
relying on the hook being called just before the update.
This patch would affect only users in case 3. These users are
depending on fairly obviously wrong behavior, and moreover they can
simply change their current post-update into post-recieve hooks,
and their systems will work correctly again.
Signed-off-by: Stefan Karpinski <stefan.karpinski@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to find out mode changes, we should not access the symlink
targets using stat(); instead we use lstat() so that the diff does
not fail trying to find a non-existing symlink target.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document some possible Apache configurations when the path_info feature
is enabled in gitweb.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gitweb links to a number of static files such as CSS stylesheets,
favicon or the git logo. When, such as with the default Makefile, the
paths to these files are relative (i.e. doesn't start with a "/"), the
files become inaccessible in any view other tha project list and summary
page if gitweb is invoked with a non-empty PATH_INFO.
Fix this by adding a <base> element pointing to the script's own URL,
which ensure that all relative paths will be resolved correctly.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The CVS protocol documentation, found at
http://www.wandisco.com/techpubs/cvs-protocol.pdf
states the following about the 'noop' command:
Response expected: yes. This request is a null command
in the sense that it doesn't do anything, but merely
(as with any other requests expecting a response) sends
back any responses pertaining to pending errors, pending
Notified responses, etc.
In accordance with this, the correct way to handle the 'noop'
command, when issued by a client, is to call req_EMPTY.
The 'noop' command is called by some CVS clients, notably
TortoiseCVS, thus making it desirable for git-cvsserver to
respond to the command rather than choking on it as unknown.
Signed-off-by: Stefan Karpinski <stefan.karpinski@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fsck" used to validate only loose objects that are local and nothing
else by default. This is not just too little when a repository is
borrowing objects from other object stores, but also caused the
connectivity check to mistakenly declare loose objects borrowed from them
to be missing.
The rationale behind the default mode that validates only loose objects is
because these objects are still young and more unlikely to have been
pushed to other repositories yet. That holds for loose objects borrowed
from alternate object stores as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default we looked at all refs but not HEAD. The only thing that made
fsck not lose sight of commits that are only reachable from a detached
HEAD was the reflog for the HEAD.
This fixes it, with a new test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The signal tests consists of checking that each of our
handlers is executed, and that the test program was killed
by the final signal. We arbitrarily used SIGINT as the kill
signal.
However, some platforms (notably Solaris) will default
SIGINT to SIG_IGN if there is no controlling terminal. In
that case, we don't end up killing the program with the
final signal and the test fails.
This is a problem since the test script should not depend
on outside factors; let's use SIGTERM instead, which should
behave consistently.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling "git symbolic-ref" it is easy to forget that
the target must be a fully qualified ref. E.g., you might
accidentally do:
$ git symbolic-ref HEAD master
Unfortunately, this is very difficult to recover from,
because the bogus contents of HEAD make git believe we are
no longer in a git repository (as is_git_dir explicitly
checks for "^refs/heads/" in the HEAD target). So
immediately trying to fix the situation doesn't work:
$ git symbolic-ref HEAD refs/heads/master
fatal: Not a git repository
and one is left editing the .git/HEAD file manually.
Furthermore, one might be tempted to use symbolic-ref to set
up a detached HEAD:
$ git symbolic-ref HEAD `git rev-parse HEAD`
which sets up an even more bogus HEAD:
$ cat .git/HEAD
ref: 1a9ace4f2ad4176148e61b5a85cd63d5604aac6d
This patch introduces a small safety valve to prevent the
specific case of anything not starting with refs/heads/ to
go into HEAD. The scope of the safety valve is intentionally
very limited, to make sure that we are not preventing any
behavior that would otherwise be valid (like pointing a
different symref than HEAD outside of refs/heads/).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are trying to determine whether a directory contains
a git repository, one of the tests we do is to check whether
HEAD is either a symlink or a symref into the "refs/"
hierarchy, or a detached HEAD.
We can tighten this a little more, though: a non-detached
HEAD should always point to a branch (since checking out
anything else should result in detachment), so it is safe to
check for "refs/heads/".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The size of the content we are adding may be larger than
2.1G (i.e., "git add gigantic-file"). Most of the code-path
to do so uses size_t or unsigned long to record the size,
but write_loose_object uses a signed int.
On platforms where "int" is 32-bits (which includes x86_64
Linux platforms), we end up passing malloc a negative size.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the newly introduced test_commit() and test_merge() helpers.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test_commit() and test_merge(). This way, it is harder to forget to
tag, or to call test_tick before committing.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test_commit() and test_merge(), reducing the code while making the
intent clearer.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Often we just need to add a commit with a given (short) name, that will
be tagged with the same name. Now, relatively complicated graphs can be
constructed easily and in a clear fashion:
test_commit A &&
test_commit B &&
git checkout A &&
test_commit C &&
test_merge D B
will construct this graph:
A - B
\ \
C - D
For simplicity, files whose name is the lower case version of the commit
message (to avoid a warning about ambiguous names) will be committed, with
the corresponding commit messages as contents.
If you need to provide a different file/different contents, you can use
the more explicit form
test_commit $MESSAGE $FILENAME $CONTENTS
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it easy for other authors to use rebase tests' fake-editor.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than copying and pasting, which is prone to lead to fixes
missing in one version, move the fake-editor generator to t/t3404/.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After you resolve a conflicted merge to remove the path, "git add -u"
failed to record the removal. Instead it errored out by saying that the
removed path is not found in the work tree, but that is what the user
already knows, and the wanted to record the removal as the resolution,
so the error does not make sense.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also as suggested by Junio, in order to try to catch other MIME
problems, test cases from the "8. Examples" section of RFC2047 are added
to t5100 testsuite as well.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Actually, I think the issue is pretty independent of submodules; when
"git commit" gets an empty parameter, it misinterprets it as a file.
So avoid passing an empty parameter to "git commit".
Actually, this is a nice cleanup, as MSG_FILE and EDIT_COMMIT were mutually
exclusive; use one variable instead
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Attempting to rebase three-commit series (two regular changes, followed by
one commit that changes what commit is bound for a submodule path) to
squash the first two results in a failure; not just the first two commits
squashed, but the change to the submodule is also included in the result.
This failure causes the subsequent step to "pick" the change that actually
changes the submodule to be applied, because there is no change left to be
applied.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Offering Last-modified header for feeds is only half the work, even if
we bail out early on HEAD requests. We should also check that same date
against If-modified-since, and bail out early with 304 Not Modified if
that's the case.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last-modified time header added by RSS to increase cache hits from
readers should be set to the date the repository was last modified. The
author time in this respect is not a good guess because the last commit
might come from a oldish patch.
Use the committer time for the last-modified header to ensure a more
correct guess of the last time the repository was modified.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The RSS 2.0 specifications defines not one but _two_ dates for its
channel element! Woohoo! Luckily, it seems that consensus seems to be
that if both are present they should be equal, except for some very
obscure and discouraged cases. Since lastBuildDate would make more sense
for us and pubDate seems to be the most commonly used, we defined both
and make them equal.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The RSS 2.0 specification allows an optional managingEditor tag for the
channel, containing the "email address for person responsible for editorial
content", which is basically the project owner.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add <generator> tag to RSS and Atom feed. Versioning info (gitweb/git
core versions, separated by a literal slash) is stored in the
appropriate attribute for the Atom feed, and in the tag content for the
RSS feed.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define the channel image for the rss feed when the logo or favicon are
defined, preferring the former to the latter. As suggested in the RSS
2.0 specifications, the image's title and link as set to the same as the
channel's.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to simply try calling execvp(); if it succeeded, then we were done
and the new program was running. If it didn't, then we knew that it wasn't
a valid command.
Unfortunately, this interacted badly with the new pager handling. Now that
git remains the parent process and the pager is spawned, git has to hang
around until the pager is finished. We install an atexit handler to do
this, but that handler never gets called if we successfully run execvp.
You could see this behavior by running any dashed external using a pager
(e.g., "git -p stash list"). The command finishes running, but the pager
is still going. In the case of less, it then gets an error reading from
the terminal and exits, potentially leaving the terminal in a broken state
(and not showing the output).
This patch just uses run_command() to try running the dashed external. The
parent git process then waits for the external process to complete and
then handles the pager cleanup as it would for an internal command.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
run_command() returns a single integer specifying either an
error code or the exit status of the spawned program. The
only way to tell the difference is that the error codes are
outside of the allowed range of exit status values.
Rather than make each caller implement the test against a
magic limit, let's provide a macro.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When run_command() was asked to run a non-existant command, its behavior
varied depending on the platform:
- on POSIX systems, we would fork, and then after the execvp call
failed, we could call die(), which prints a message to stderr and
exits with code 128.
- on Windows, we do a PATH lookup, realize the program isn't there, and
then return ERR_RUN_COMMAND_FORK
The goal of this patch is to make it clear to callers that the specific
error was a missing command. To do this, we will return the error code
ERR_RUN_COMMAND_EXEC, which is already defined in run-command.h, checked
for in several places, but never actually gets set.
The new behavior is:
- on POSIX systems, we exit the forked process with code 127 (the same
as the shell uses to report missing commands). The parent process
recognizes this code and returns an EXEC error. The stderr message is
silenced, since the caller may be speculatively trying to run a
command. Instead, we use trace_printf so that somebody interested in
debugging can see the error that occured.
- on Windows, we check errno, which is already set correctly by
mingw_spawnvpe, and report an EXEC error instead of a FORK error
Thus it is safe to speculatively run a command:
int r = run_command_v_opt(argv, 0);
if (r == -ERR_RUN_COMMAND_EXEC)
/* oops, it wasn't found; try something else */
else
/* we failed for some other reason, error is in r */
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While the configure script sets the EXPATDIR environment variable to
whatever value was passed to its option --with-expat as the prefix of
the location of the expat library and headers, the Makefile ignored it.
This patch fixes this bug.
Signed-off-by: Serge van den Boom <svdb@stack.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a static function called run_command which
conflicts with the library function in run-command.c; this
isn't a problem currently, but prevents including
run-command.h in git.c.
This patch just renames the static function to something
more specific and non-conflicting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This functions similarly to "git branch --contains"; it will show all
tags that contain the specified commit, by sharing the same logic.
The patch also adds documentation and tests for the new option.
Signed-off-by: Jake Goulding <goulding@vivisimo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move has_commit() from branch to a common location, in preparation for
using it in "git-tag". Rename it to is_descendant_of() to make it more
unique and descriptive.
Signed-off-by: Jake Goulding <goulding@vivisimo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Moving opt_parse_with_commit() from branch to a common location, in
preparation for using it in tag. Rename it to match naming convention
of other option parsing functions.
Signed-off-by: Jake Goulding <goulding@vivisimo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the existing codepaths were meant to treat missing uninteresting
objects to be a silently ignored non-error, but there were a few places
in handle_commit() and add_parents_to_list(), which are two key functions
in the revision traversal machinery, that cared:
- When a tag refers to an object that we do not have, we barfed. We
ignore such a tag if it is painted as UNINTERESTING with this change.
- When digging deeper into the ancestry chain of a commit that is already
painted as UNINTERESTING, in order to paint its parents UNINTERESTING,
we barfed if parse_parent() for a parent commit object failed. We can
ignore such a parent commit object.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update usage statement to remove a no-longer supported option, and to hide two
options (one a no-op, one internal) unless --help-all is used.
Use "test -t 0" instead of "tty -s" to detect when stdin is a terminal. (test
-t 0 is used elsewhere in git-am and in other git shell scripts, tty -s is
not, and appears to be deprecated by POSIX)
Use "test ..." instead of "[ ... ]" and "die <msg>" instead of "echo <msg>
>&2; exit 1" to be consistent with rest of script.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last test case checks whether unpacked objects receive the time stamp
of the pack file. Due to different implementations of stat(2) by MSYS and
our version in compat/mingw.c, the test fails in about half of the test
runs.
Note the following facts:
- The test uses perl's -M operator to compare the time stamps. Since we
depend on MSYS perl, the result of this operator is based on MSYS's
implementation of the stat(2) call.
- NTFS on Windows records fractional seconds.
- The MSYS implementation of stat(2) *rounds* fractional seconds to full
seconds instead of truncating them. This becomes obvious by comparing the
modification times reported by 'ls --full-time $f' and 'stat $f' for
various files $f.
- Our implementation of stat(2) in compat/mingw.c *truncates* to full
seconds.
The consequence of this is that
- add_packed_git() picks up a truncated whole second modification time
from the pack file time stamp, which is then used for the loose objects,
while the pack file retains its time stamp in fractional seconds;
- but the test case compared the pack file's rounded modification times
to the loose objects' truncated modification times.
And half of the time the rounded modification time is not the same as its
truncated modification time.
The fix is that we replace perl by 'test-chmtime -v +0', which prints the
truncated whole-second mtime without modifying it.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
send-pack: do not send unknown object name from ".have" to pack-objects
test-path-utils: Fix off by one, found by valgrind
get_sha1_basic(): fix invalid memory access, found by valgrind
v1.6.1 introduced ".have" extension to the protocol to allow the receiving
side to advertise objects that are reachable from refs in the repositories
it borrows from. This was meant to be used by the sending side to avoid
sending such objects; they are already available through the alternates
mechanism.
The client side implementation in v1.6.1, which was introduced with
40c155f (push: prepare sender to receive extended ref information from the
receiver, 2008-09-09) aka v1.6.1-rc1~203^2~1, were faulty in that it did
not consider the possiblity that the repository receiver borrows from
might have objects it does not know about.
This fixes it by refraining from passing missing commits to underlying
pack-objects. Revision machinery may need to be tightened further to
treat missing uninteresting objects as non-error events, but this is an
obvious and safe fix for a maintenance release that is almost good enough.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When normalizing an absolute path, we might have to add a slash _and_ a
NUL to the buffer, so the buffer was one too small.
Let's just future proof the code and alloc PATH_MAX + 1 bytes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When get_sha1_basic() is passed a buffer of len 0, it should not
check if buf[len-1] is a curly bracket.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, git mergetool used cat-file which does not perform git to
worktree conversion. This changes mergetool to use git checkout-index
instead which means that the temporary files used for mergetool use the
correct line endings for the platform.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git mergetool listed some candidates for mergetools twice, depending on
the environment.
This slightly changes the behavior when both KDE_FULL_SESSION and
GNOME_DESKTOP_SESSION_ID are set at the same time; in such a case
meld is used in favor of kdiff3 (the old code favored kdiff3 in such a
case), but it should not matter in practice.
Signed-off-by: Johannes Gilger <heipei@hackvalue.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is an evil merge, as a test added since 1.6.0 expects an incorrect
behaviour the merged commit fixes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A patch that changes the filetype (e.g. regular file to symlink) of a path
must be split into a deletion event followed by a creation event, which
means that we need to have two independent metainfo lines for each.
However, the code reused the single set of metainfo lines.
As the blob object names recorded on the index lines are usually not used
nor validated on the receiving end, this is not an issue with normal use
of the resulting patch. However, when accepting a binary patch to delete
a blob, git-apply verified that the postimage blob object name on the
index line is 0{40}, hence a patch that deletes a regular file blob that
records binary contents to create a blob with different filetype (e.g. a
symbolic link) failed to apply. "git am -3" also uses the blob object
names recorded on the index line, so it would also misbehave when
synthesizing a preimage tree.
This moves the code to generate metainfo lines around, so that two
independent sets of metainfo lines are used for the split halves.
Additional tests by Jeff King.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some shells have issues with a single-shot environment variable export
when invoking a shell function. This fixes the ones I found that invoke
test_must_fail that way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
d911d14 (rebase -i: learn to rebase root commit, 2009-01-02) tried to
remember the --root flag across a merge conflict in a broken way.
Introduce a flag file $DOTEST/rebase-root to fix and clarify.
While at it, also make sure $UPSTREAM is always initialized to guard
against existing values in the environment.
[tr: added tests]
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As discussed in
http://lists.apple.com/archives/Unix-porting/2005/Mar/msg00019.html
the Mac OS X C standard library is always thread safe and always
includes the pthread library. So explicitly using -pthread causes an
'unrecognized option' compiler warning.
This patch clears PTHREAD_LIBS if Darwin is detected.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The document suggests to imitate the existing code, but didn't
say which existing code it should imitate. This clarifies.
Signed-off-by: しらいしななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The RUNTIME_PREFIX mechanism allows us to use the default paths on
Windows too. Defining RUNTIME_PREFIX explicitly requests for
translation of paths relative to the executable at runtime.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for relocatable binaries (called
RUNTIME_PREFIX). Such binaries can be moved together with the
system configuration files to a different directory, as long as the
relative paths from the binary to the configuration files is
preserved. This functionality is essential on Windows where we
deliver git binaries with an installer that allows to freely choose
the installation location.
If RUNTIME_PREFIX is unset we use the static prefix. This will be
the default on Unix. Thus, the behavior on Unix will remain
identical to the old implementation, which used to add the prefix
in the Makefile.
If RUNTIME_PREFIX is set the prefix is computed from the location
of the executable. In this case, system_path() tries to strip
known directories that executables can be located in from the path
of the executable. If the path is successfully stripped it is used
as the prefix. For example, if the executable is
"/msysgit/bin/git" and BINDIR is "bin", then the prefix computed is
"/msysgit".
If the runtime prefix computation fails, we fall back to the static
prefix specified in the makefile. This can be the case if the
executable is not installed at a known location. Note that our
test system sets GIT_CONFIG_NOSYSTEM to tell git to ignore global
configuration files during testing. Hence testing does not trigger
the fall back.
Note that RUNTIME_PREFIX only works on Windows, though adding
support on Unix should not be too hard. The implementation
requires argv0_path to be set to an absolute path. argv0_path must
point to the directory of the executable. We use assert() to
verify this in debug builds. On Windows, the wrapper for main()
(see compat/mingw.h) guarantees that argv0_path is correctly
initialized. On Unix, further work is required before
RUNTIME_PREFIX can be enabled.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Searching git programs only in the highest priority location is
sufficient. It does not make sense that some of the required
programs are located at the highest priority location but other
programs are picked up from a lower priority exec-path. If
exec-path is overridden a complete set of commands should be
provided, otherwise several different versions could get mixed,
which is likely to cause confusion.
If a user explicitly overrides the default location (by --exec-path
or GIT_EXEC_PATH), we now expect that all the required programs are
found there. Instead of adding the directories "argv_exec_path",
"getenv(EXEC_PATH_ENVIRONMENT)", and "system_path(GIT_EXEC_PATH)"
to PATH, we now rely on git_exec_path(), which implements the same
order, but only returns the highest priority location to search for
executables.
Accessing only the location with highest priority is also required
for testing executables built with RUNTIME_PREFIX. The call to
system_path() should be avoided if RUNTIME_PREFIX is set and the
executable is not installed at its final destination. Because we
test before installing, we want to avoid calling system_path()
during tests. The modifications in this commit avoid calling
system_path(GIT_EXEC_PATH) if a higher-priority location is
provided, which is the case when running the tests.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Programs that use git_config need to find the global configuration.
When runtime prefix computation is enabled, this requires that
git_extract_argv0_path() is called early in the program's main().
This commit adds the necessary calls.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit moves the code that computes the dirname of argv[0]
from git.c's main() to git_set_argv0_path() and renames the function
to git_extract_argv0_path(). This makes the code in git.c's main
less cluttered, and we can use the dirname computation from other
main() functions too.
[ spr:
- split Steve's original commit and wrote new commit message.
- Integrated Johannes Schindelin's
cca1704897 while rebasing onto master.
]
Signed-off-by: Steve Haslam <shaslam@lastminute.com>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit prepares the Makefile for relocatable binaries (called
RUNTIME_PREFIX). Such binaries will be able to be moved together
with the system configuration files to a different directory,
requiring to compute the prefix at runtime.
In a first step, we make all paths relative in the Makefile and
teach system_path() to add the prefix instead. We used to compute
absolute paths in the Makefile and passed them to C as defines. We
now pass relative paths to C and call system_path() to add the
prefix at runtime.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This tries to make the description of ref matching in git push easier
to read. Beauty is in the eye of the beholder, though.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include examples of using HEAD. The order of examples
introduces new concepts one by one. This pushes the
example of deleting a ref to the end of the list.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The refspec format description was a mix of regexp and BNF, making it
very difficult to read. The format was also wrong: it did not show
that each part of a refspec is optional in different situations.
Rather than having a confusing grammar, just present the format in
informal prose.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are not rebasing with --root, then $# can only be either 1 (base)
or 2 (base and the name of the branch to be rebased).
If we are rebasing with --root, then it is Ok if $# is 0 (rebase the
current branch down to everything) or 1 (rebase the named branch down to
everything).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the tutorial Alice initializes the repository, and Bob clones it. So
Bob can just do a 'git pull', but Alice will need 'git pull <url>
<branch>'.
The note suggested that the branch parameter is not necessary, which is
no longer true these days.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option tells 'git-am' to ignore the date header field
recorded in the format-patch output. The commits will have the
timestamp when they are created instead.
You can work a lot in one day to accumulate many changes, but
apply and push to the public repository only some of them at
the end of the first day. Then next day you can spend all your
working hours reading comics or chatting with your coworkers,
and apply your remaining patches from the previous day using
this option to pretend that you have been working at the end
of the day.
Signed-off-by: しらいしななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option tells 'git-am' to use the timestamp recorded
in the Email message as both author and committer date.
Signed-off-by: しらいしななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kb/lstat-cache:
lstat_cache(): introduce clear_lstat_cache() function
lstat_cache(): introduce invalidate_lstat_cache() function
lstat_cache(): introduce has_dirs_only_path() function
lstat_cache(): introduce has_symlink_or_noent_leading_path() function
lstat_cache(): more cache effective symlink/directory detection
* js/diff-color-words:
Change the spelling of "wordregex".
color-words: Support diff.wordregex config option
color-words: make regex configurable via attributes
color-words: expand docs with precise semantics
color-words: enable REG_NEWLINE to help user
color-words: take an optional regular expression describing words
color-words: change algorithm to allow for 0-character word boundaries
color-words: refactor word splitting and use ALLOC_GROW()
Add color_fwrite_lines(), a function coloring each line individually
Added a test for this option, similar to (and based on) t9133 about
ignorance of .git directories
Signed-off-by: Vitaly "_Vi" Shukela <public_vi@tut.by>
Acked-by: Eric Wong <normalperson@yhbt.net>
[ew: replaced 'echo -e' with printf so it works on POSIX shells]
[ew: added Vitaly to copyright even though it's based on my test]
Documented --ignore-paths option of git-svn to inform users about
the feature and provide some examples.
Signed-off-by: Vitaly "_Vi" Shukela <public_vi@tut.by>
Acked-by: Eric Wong <normalperson@yhbt.net>
[ew: trailing whitespace removed]
This will be useful when somebody want to checkout something partially from
repository with some non-standart layout or exclude some files from it.
Example: repository has structure /module-{a,b,c}/{trunk,branches,tags}/...
Modules are interdependent, and you want it to be single repostory (to commit
to all modules simultaneously and view complete history), but do not want
branches and tags be checked out into working copy.
Other use case is excluding some large blobs.
The quirk for now is that user must specify this option every fetch/rebase;
in other case he may get extra files or "file not found" errors. It may be
will be resolved by adding regular expression to .git/config into
[svn-remote ...] to make it persistent.
Signed-off-by: Vitaly "_Vi" Shukela <public_vi@tut.by>
Acked-by: Eric Wong <normalperson@yhbt.net>
[ew: replaced 4-space indent with tabs]
[ew: prefixed $ignore_regex with an underscore to be consistent
with other globals in git-svn]
[ew: rearranged functions to minimize diff and removed prototype
usage to be consistent with the rest of git-svn (and other
Perl code in git (and they're ugly to me)]
By enforcing SVN::Pool usage when calling get_file once again.
This regression was introduced with the reintroduction of
SVN::Ra::get_file() usage in
dbc6c74d08
Signed-off-by: Eric Wong <normalperson@yhbt.net>
b1c7d4a (http-push: refactor lock-related headers creation for curl
requests, 2009-01-24) had many style violations that slipped through.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a call to git-log that I introduced for debugging and that
accidentally made it into d18ba22 (sha1_name: support @{-N} syntax in
get_sha1(), 2009-01-17).
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
DAV-related headers (more specifically, headers related to the lock token,
namely, If, Lock-Token, and Timeout) for curl requests are created and
allocated individually, eg a "if_header" variable for the "If: " header, a
"timeout_header" variable for the "Timeout: " header.
This patch provides a new function ("get_dav_token_headers") that creates
these header, saving methods from allocating memory, and from issuing a
"curl_slist_append()" call. The temporary string storage given to
curl_slist_append() is freed much earlier than the previous code with this
patch, but this change is safe, because curl_slist_append() keeps a copy
of the given string.
In part, this patch also addresses the fact that commit 753bc91 (Remove
the requirement opaquelocktoken uri scheme) did not update memory
allocations for DAV-related headers.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/maint-no-index-fixes:
diff --no-index -q: fix endless loop
diff --no-index: test for pager after option parsing
diff: accept -- when using --no-index
* am/maint-push-doc:
Documentation: avoid using undefined parameters
Documentation: mention branches rather than heads
Documentation: remove a redundant elaboration
Documentation: git push repository can also be a remote
With --reject, git-am simply passes the --reject option to git-apply and thus
allows people to work with reject files if they so prefer.
Signed-off-by: martin f. krafft <madduck@madduck.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add testcases for 'git log --diff-filter=[CM]' (copies and renames).
Also add a testcase for 'git log --follow'.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cloning an empty repository manually (that is, doing 'git init' and
then doing all configuration by hand) can be a lot of work. Save the
user this work by allowing the cloning of empty repositories.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for git-describe says the default abbreviation is 8
hexadecimal digits while cache.c clearly shows DEFAULT_ABBREV set to 7.
This patch corrects the documentation.
Signed-off-by: Boyd Stephen Smith Jr <bss@iguanasuicide.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "wordRegex" for configuration variable names. Use "word_regex" for C
language tokens.
Signed-off-by: Boyd Stephen Smith Jr. <bss@iguanasuicide.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since ea27a18 (spawn pager via run_command interface), the
original git process actually does git work, and the pager
is a child process (actually, on Windows it has always been
that way, since Windows lacks fork). After spawning the
pager, we register an atexit() handler that waits for the
pager to finish.
Unfortunately, that handler does not always run. In
particular, if git is killed by a signal, then we exit
immediately. The calling shell then thinks that git is done;
however, the pager is still trying to run and impact the
terminal. The result can be seen by running a long git
process with a pager (e.g., "git log -p") and hitting ^C.
Depending on your config, you should see the shell prompt,
but pressing a key causes the pager to do any terminal
de-initialization sequence.
This patch just intercepts any death-dealing signals and
waits for the pager before dying. Under typical less
configuration, that means hitting ^C will cause git to stop
generating output, but the pager will keep running.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code is very inconsistent about which signals
are caught for doing cleanup of temporary files and lock
files. Some callsites checked only SIGINT, while others
checked a variety of death-dealing signals.
This patch factors out those signals to a single function,
and then calls it everywhere. For some sites, that means
this is a simple clean up. For others, it is an improvement
in that they will now properly clean themselves up after a
larger variety of signals.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a piece of code wanted to do some cleanup before exiting
(e.g., cleaning up a lockfile or a tempfile), our usual
strategy was to install a signal handler that did something
like this:
do_cleanup(); /* actual work */
signal(signo, SIG_DFL); /* restore previous behavior */
raise(signo); /* deliver signal, killing ourselves */
For a single handler, this works fine. However, if we want
to clean up two _different_ things, we run into a problem.
The most recently installed handler will run, but when it
removes itself as a handler, it doesn't put back the first
handler.
This patch introduces sigchain, a tiny library for handling
a stack of signal handlers. You sigchain_push each handler,
and use sigchain_pop to restore whoever was before you in
the stack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two pieces of code that create tempfiles for diff:
run_external_diff and run_textconv. The former cleans up its
tempfiles in the face of premature death (i.e., by die() or
by signal), but the latter does not. After this patch, they
will both use the same cleanup routines.
To make clear what the change is, let me first explain what
happens now:
- run_external_diff uses a static global array of 2
diff_tempfile structs (since it knows it will always
need exactly 2 tempfiles). It calls prepare_temp_file
(which doesn't know anything about the global array) on
each of the structs, creating the tempfiles that need to
be cleaned up. It then registers atexit and signal
handlers to look through the global array and remove the
tempfiles. If it succeeds, it calls the handler manually
(which marks the tempfile structs as unused).
- textconv has its own tempfile struct, which it allocates
using prepare_temp_file and cleans up manually. No
signal or atexit handlers.
The new code moves the installation of cleanup handlers into
the prepare_temp_file function. Which means that that
function now has to understand that there is static tempfile
storage. So what happens now is:
- run_external_diff calls prepare_temp_file
- prepare_temp_file calls claim_diff_tempfile, which
allocates an unused slot from our global array
- prepare_temp_file installs (if they have not already
been installed) atexit and signal handlers for cleanup
- prepare_temp_file sets up the tempfile as usual
- prepare_temp_file returns a pointer to the allocated
tempfile
The advantage being that run_external_diff no longer has to
care about setting up cleanup handlers. Now by virtue of
calling prepare_temp_file, run_textconv gets the same
benefit, as will any future users of prepare_temp_file.
There are also a few side benefits to the specific
implementation:
- we now install cleanup handlers _before_ allocating the
tempfile, closing a race which could leave temp cruft
- when allocating a slot in the global array, we will now
detect a situation where the old slots were not properly
vacated (i.e., somebody forgot to call remove upon
leaving the function). In the old code, such a situation
would silently overwrite the tempfile names, meaning we
would forget to clean them up. The new code dies with a
bug warning.
- we make sure only to install the signal handler once.
This isn't a big deal, since we are just overwriting the
old handler, but will become an issue when a later patch
converts the code to use sigchain
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We had defined some SIG_FOO macros that appear in the code, but that are
not supported on Windows, in order to make the code compile. But a
subsequent change will assert that a signal number is non-zero. We now
use the signal numbers that are commonly used on POSIX systems.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* am/maint-push-doc:
Documentation: avoid using undefined parameters
Documentation: mention branches rather than heads
Documentation: remove a redundant elaboration
Documentation: git push repository can also be a remote
* sb/hook-cleanup:
run_hook(): allow more than 9 hook arguments
run_hook(): check the executability of the hook before filling argv
api-run-command.txt: talk about run_hook()
Move run_hook() from builtin-commit.c into run-command.c (libgit)
checkout: don't crash on file checkout before running post-checkout hook
When diff is invoked with --color-words (w/o =regex), use the regular
expression the user has configured as diff.wordregex.
diff drivers configured via attributes take precedence over the
diff.wordregex-words setting. If the user wants to change them, they have
their own configuration variables.
Signed-off-by: Boyd Stephen Smith Jr <bss@iguanasuicide.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only accept "checkout: moving from A to B" newer style reflog entries,
in order to pick up A. There is no point computing where B begins at
after running strstr to locate " to ", nor adding 4 and then subtracting 4
from the same pointer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All the other config variables use CamelCase. This config variable should
not be an exception.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit c5ee71f (commit: more compact summary and without extra
quotes, 2009-01-19) changed the "git commit" output when creating a
commit. This patch updates the example session in the tutorial to match
the new output.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In diffcore_rename, we assume that the blob contents in the filespec
aren't required anymore after estimate_similarity has been called and thus
we free it. But estimate_similarity might return early when the file sizes
differ too much. In that case, cnt_data is never set and the next call to
estimate_similarity will populate the filespec again, eventually rereading
the same blob over and over again.
To fix that, we first get the blob sizes and only when the blob contents
are actually required, and when cnt_data will be set, the full filespec is
populated, once.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to be cached, configure variables need to contain the
string '_cv_', and they should begin with a package-specific
prefix in order to avoid interfering with third-party macros.
Rename ld_dashr, ld_wl_rpath, ld_rpath to git_cv_ld_dashr etc.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The install target uses a foreach loop to generate a single long shell
command line to handle installation of the built-in git commands. The
maximum length of the argument list varies by platform, and this use of
foreach quickly grows the length of the argument list. Current git can
exceed the default maximum argument list length on IRIX 6.5 of 20480
depending on the installation path.
Rather than using make's foreach loop to pre-generate the shell command
line, use a shell for-loop and allow the shell to iterate through each of
the built-in commands.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 'man 1p trap' there is written:
"Implementations may permit names with the SIG prefix or ignore case
in signal names as an extension."
So change the lowercase signals to uppercase, which is POSIX compliant
instead of being an extension.
There wasn't anybody claiming that it doesn't work, but there was a bug
with using a signal with the SIG prefix, which is an extension as well.
So let's play it safe and change it, since it doesn't hurt anyone.
While at it, also convert 8 indentation spaces to 1 tab character.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When interrupting git-difftool with Ctrl-C, the output of this echo
command led to having the cursor at the beginning of the line below the
shell prompt.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-difftool worked for me on an up-to-date Gentoo Linux at home, but
didn't work on a somewhat older Ubuntu Linux 7.10 at work and failed
with the following error, where 'Makefile' was locally modified:
trap: 244: SIGINT: bad trap
external diff died, stopping at Makefile.
In 'man 1p trap' there is written:
"The condition can be EXIT, 0 (equivalent to EXIT), or a signal
specified using a symbolic name, without the SIG prefix, [...]"
"Implementations may permit names with the SIG prefix or ignore case
in signal names as an extension."
So now we do it the POSIX compliant way instead of using an extension.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the report format again to save the screen real estates, while
avoiding from enclosing the one-line summary of the commit log inside
double quotes pair, which looks awkward when the message begins or ends
with a double quote. The old format looked like this:
[master]: created d9a5491: "foo:bar"
Simply removing the double quotes were found to be confusing as a message
often begins with a short-word (area of the system) and a colon.
The new format looks like this:
[master d9a5491] foo:bar
As discussed in the git mailing list:
http://thread.gmane.org/gmane.comp.version-control.git/101687/focus=101735
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used to scan only the last few kilobytes of a reflog, as a
cheap optimization when the data you are looking for is likely to be
found near the end of it. The caller is expected to fall back to the
full scan if that is not the case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 5ef8d77a implemented color_parse_mem, a function for
parsing colors from a non-NUL-terminated string, by simply
allocating a new NUL-terminated string and calling
color_parse. This had a small but measurable speed impact on
a user format that used the advanced color parsing. E.g.,
# uses quick parsing
$ time ./git log --pretty=tformat:'%Credfoo%Creset' >/dev/null
real 0m0.673s
user 0m0.652s
sys 0m0.016s
# uses color_parse_mem
$ time ./git log --pretty=tformat:'%C(red)foo%C(reset)' >/dev/null
real 0m0.692s
user 0m0.660s
sys 0m0.032s
This patch implements color_parse_mem as the primary
function, with color_parse as a wrapper for strings. This
gives comparable timings to the first case above.
Original patch by René. Commit message and debugging by Jeff
King.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code used to misbehave when options to ignore certain whitespaces
(-w -b and --ignore-at-eol) were combined.
Signed-off-by: Keith Cascio <keith@cs.ucla.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three flags involved (-w -b and --ignore-space-at-eol) which
makes 8 combinations possible in total, but only 3 cases are tested (none,
-w alone and -b alone).
This adds the other 5 cases.
Signed-off-by: Keith Cascio <keith@cs.ucla.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-shell's man page explicitly lists all allowed commands, but 'cvs
server' was missing. Add it.
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To do that, Git no longer looks forward for the '@{' corresponding to the
closing '}' but backward, and dwim_ref() as well as dwim_log() learnt
about the @{-<N>} notation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can have quite a many reflog entries, but you typically won't recall
which branch you were on after switching branches for more than several
times.
Instead of reading the reflog twice, this reads the branch switching event
and keeps as many entries as the user asked from the latest such entries,
which is the minimum required to be able to switch back to the branch we
were recently on.
[jc: improvements from Dscho squashed in]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff, log and show all take the same diff options. Refactor them from
__git_diff and __git_log into a variable, and complete them in
__git_show too.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the options --pickaxe-all and --pickaxe-regex to git-log, where
they make more sense than with git-diff.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You only need to edit worktree files when comparing against
the worktree. Put the cursor automatically into its window for
vimdiff and gvimdiff to avoid doing <C-w>l every time.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes the difftool docs always refer to the
git-difftool script using the dashed form of the name.
Only command examples use the non-dashed form now.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In svn 1.5.5 the output of "svn info" for added directories was changed
and now shows the repository UUID. This patch implements the same
behavior for "git svn info" and makes t9119-git-svn-info.17 pass if
svn 1.5.5 is used.
Signed-off-by: Marcel Koeppen <git-dev@marzelpan.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
The $FIRSTLINE variable is from the user's commit and can contain
arbitrary backslash escapes that may be (mis)interpreted when given to
"echo", depending on the implementation. Use "printf" to work around the
issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some SVN repositories contain git repositories within them
(hopefully accidentally checked in). Since git refuses to track
nested ".git" repositories, this can be a problem when fetching
updates from SVN.
Thanks to Morgan Christiansson for the report and testing.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The get_log() function in the Perl SVN API introduced the limit
parameter in 1.2.0. However, this got discarded in our SVN::Ra
compatibility layer when used with SVN 1.1.x. We now emulate
the limit functionality in older SVN versions by preventing the
original callback from being called if the given limit has been
reached. This emulation is less bandwidth efficient, but SVN
1.1.x is becoming rarer now.
Additionally, the --limit parameter in svn(1) uses the
aforementioned get_log() functionality change in SVN 1.2.x.
t9129 no longer depends on --limit to work and instead uses
Perl to parse out the commit message.
Thanks to Tom G. Christensen for the bug report.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
By default git-svn stores timestamps of fetched commits in
Subversion's UTC format. Passing --localtime to fetch will convert
them to the timezone of the server on which git-svn is run.
This makes the timestamps of a resulting "git log" agree with what
"svn log" shows for the same repository.
Signed-off-by: Pete Harlan <pgit@pcharlan.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
This is a followup to 7fc35e0e94,
(workaround a for broken symlinks in SVN).
Since broken SVN clients can commit svn:special files without
the magic "link " prefix, this can affect delta application
when we update the broken svn:special file. So now we fall
back and retry the delta application on symlinks if having
a "link " prefix fails.
Our behavior differs from svn(1) (v1.5.1) slightly:
When a svn:special file is created w/o a "link " prefix, svn
will create a regular file (mode 100644 to git) with the
contents of the blob as-is.
Our behavior is to continue creating the symlink (mode 120000
to git) with the contents of the blob as-is. While this
differs from current svn(1) behavior, this is easier and more
efficient to implement (and the correctness of the svn(1) is
debatable, since it's a workaround for a bug in the first
place).
More information on this SVN bug is described here:
http://subversion.tigris.org/issues/show_bug.cgi?id=2692
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Broken SVN clients generate empty files with the svn:special set
to '*'. This attempts to denote a symlink pointing to a file
with an empty path (""), which cannot be generated on a POSIX
system.
Thus, we mimic the behavior of svn(1) and create a zero-byte
file in our tree.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The <ref> parameter has not been introduced, so rewrite to
avoid it.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "matching refs" semantics works only on matching branches these days.
Instead of using "heads" which traditionally has been used more or less
interchangeably with "refs", say "branch" explicitly here.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment in parentheses is wrong, as one has to leave out both the
colon and <dst>. This situation is covered by the section a few lines
down:
A parameter <ref> without a colon pushes the <ref> from the source
repository to the destination repository under the same name.
So, just remove the parentheses.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is copied from pull-fetch-param.txt and helps the reader
to not get stuck in the URL section.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you want to completely clear the contents of the lstat_cache(), then
call this new function.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases it could maybe be necessary to say to the cache that
"Hey, I deleted/changed the type of this pathname and if you currently
have it inside your cache, you should deleted it".
This patch introduce a function which support this.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The create_directories() function in entry.c currently calls stat()
or lstat() for each path component of the pathname 'path' each and every
time. For the 'git checkout' command, this function is called on each
file for which we must do an update (ce->ce_flags & CE_UPDATE), so we get
lots and lots of calls.
To fix this, we make a new wrapper to the lstat_cache() function, and
call the wrapper function instead of the calls to the stat() or the
lstat() functions. Since the paths given to the create_directories()
function, is sorted alphabetically, the new wrapper would be very
cache effective in this situation.
To support it we must update the lstat_cache() function to be able to
say that "please test the complete length of 'name'", and also to give
it the length of a prefix, where the cache should use the stat()
function instead of the lstat() function to test each path component.
Thanks to Junio C Hamano, Linus Torvalds and Rene Scharfe for valuable
comments to this patch!
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases, especially inside the unpack-trees.c file, and inside
the verify_absent() function, we can avoid some unnecessary calls to
lstat(), if the lstat_cache() function can also be told to keep track
of non-existing directories.
So we update the lstat_cache() function to handle this new fact,
introduce a new wrapper function, and the result is that we save lots
of lstat() calls for a removed directory which previously contained
lots of files, when we call this new wrapper of lstat_cache() instead
of the old one.
We do similar changes inside the unlink_entry() function, since if we
can already say that the leading directory component of a pathname
does not exist, it is not necessary to try to remove a pathname below
it!
Thanks to Junio C Hamano, Linus Torvalds and Rene Scharfe for valuable
comments to this patch!
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the cache functionality more effective. Previously when A/B/C/D
was in the cache and A/B/C/E/file.c was called for, there was no match
at all from the cache. Now we use the fact that the paths "A", "A/B"
and "A/B/C" are already tested, and we only need to do an lstat() call
on "A/B/C/E".
We only cache/store the last path regardless of its type. Since the
cache functionality is always used with alphabetically sorted names
(at least it seems so for me), there is no need to store both the last
symlink-leading path and the last real-directory path. Note that if
the cache is not called with (mostly) alphabetically sorted names,
neither the old, nor this new one, would be very effective.
Previously, when symlink A/B/C/S was cached/stored in the symlink-
leading path, and A/B/C/file.c was called for, it was not easy to use
the fact that we already knew that the paths "A", "A/B" and "A/B/C"
are real directories.
Avoid copying the first path components of the name 2 zillion times
when we test new path components. Since we always cache/store the
last path, we can copy each component as we test those directly into
the cache. Previously we ended up doing a memcpy() for the full
path/name right before each lstat() call, and when updating the cache
for each time we have tested a new path component.
We also use less memory, that is, PATH_MAX bytes less memory on the
stack and PATH_MAX bytes less memory on the heap.
Thanks to Junio C Hamano, Linus Torvalds and Rene Scharfe for valuable
comments to this patch!
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When resolving conflicts, you only need to edit the $MERGED file. Put
the cursor automatically into its window for vimdiff and gvimdiff to
avoid doing <C-w>l every time.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Tested-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ability to "...fatten [the] local repository by packing everything that
is needed by the local ref into a single new pack, including things that are
borrowed from alternates"[1] is supposed to be provided by the '-a' or '-A'
options to repack when '-l' is not used, but there is a flaw. For each
pack in the local repository without a .keep file, repack supplies a
--unpacked=<pack> argument to pack-objects.
The --unpacked option to pack-objects, with or without an argument, causes
pack-objects to ignore any object which is packed in a pack not mentioned
in an argument to --unpacked=. So, if there are local packs, and
'repack -a' is called, then any objects which reside in packs accessible
through alternates will _not_ be packed. If there are no local packs, then
no --unpacked argument will be supplied, and repack will behave as expected.
[1] http://mid.gmane.org/7v8wrwidi3.fsf@gitster.siamese.dyndns.org
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three flags involved (-w -b and --ignore-space-at-eol) which
makes 8 combinations possible in total, but only 3 cases are tested (none,
-w alone and -b alone).
This adds the other 5 cases.
Signed-off-by: Keith Cascio <keith@cs.ucla.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/rebase-root:
rebase: update documentation for --root
rebase -i: learn to rebase root commit
rebase: learn to rebase root commit
rebase -i: execute hook only after argument checking
* tr/maint-no-index-fixes:
diff --no-index -q: fix endless loop
diff --no-index: test for pager after option parsing
diff: accept -- when using --no-index
* maint:
Update draft release notes for 1.6.1.1
builtin-fsck: fix off by one head count
t5540: clarify that http-push does not handle packed-refs on the remote
http-push: when making directories, have a trailing slash in the path name
http-push: fix off-by-path_len
Documentation: let asciidoc align related options
githooks.txt: add missing word
builtin-commit.c: do not remove COMMIT_EDITMSG
"git bundle create x master master" used to create a bundle that lists
the same branch (master) twice. Cloning from such a bundle resulted in
a needless warning "warning: Duplicated ref: refs/remotes/origin/master".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.0:
builtin-fsck: fix off by one head count
Documentation: let asciidoc align related options
githooks.txt: add missing word
builtin-commit.c: do not remove COMMIT_EDITMSG
According to the man page, if "git fsck" is passed one or more heads, it
should verify connectivity and validity of only objects reachable from the
heads it is passed.
However, since 5ac0a20 (Make builtin-fsck.c use parse_options.,
2007-10-15) the command behaved as if no heads were passed, when given
only one argument.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When HEAD is detached, --all should list it, too, logically, as a
detached HEAD is by definition a temporary, unnamed branch.
It is especially necessary to list it when garbage collecting, as
the detached HEAD would be trashed.
Noticed by Thomas Rast.
Note that this affects creating bundles with --all; I contend that it
is a good change to add the HEAD, so that cloning from such a bundle
will give you a current branch. However, I had to fix t5701 as it
assumed that --all does not imply HEAD.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the current working directory is a subdirectory of the gitdir (e.g.
<repo>/.git/refs/), then setup_git_directory_gently() will climb its
parent directories until it finds itself in a gitdir. However, no
matter how many parent directories it climbs, it sets
'GIT_DIR_ENVIRONMENT' to ".", which is obviously wrong.
This behaviour affected at least 'git rev-parse --git-dir' and hence
caused some errors in bash completion (e.g. customized command prompt
when on a detached head and completion of refs).
To fix this, we set the absolute path of the found gitdir instead.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-am fails it's not always easy to see which patch failed,
since it's often hidden by a lot of error messages.
Add an extra line which prints the name of the failed patch just
before the resolve message to make it easier to find.
Signed-off-by: Jonas Flodén <jonas@floden.nu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git difftool' is a git command that allows you to compare and edit files
between revisions using common merge tools. 'git difftool' does what
'git mergetool' does but its use is for non-merge situations such as
when preparing commits or comparing changes against the index.
It uses the same configuration variables as 'git mergetool' and
provides the same command-line interface as 'git diff'.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Have '-' mean the same as '@{-1}', i.e., the last branch we were on.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let get_sha1() parse the @{-N} syntax, with docs and tests.
Note that while @{-1}^2, @{-2}~5 and such are supported, @{-1}@{1} is
currently not allowed.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Have the lookup only look at "interesting" checkouts, meaning those
that tell you "Already on ..." don't count even though they also cause
a reflog entry.
Let interpret_nth_last_branch() return the number of characters
parsed, so that git-checkout can verify that the branch spec was
@{-N}, not @{-1}^2 or something like that. (The latter will be added
later.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement a shortcut @{-N} for the N-th last branch checked out, that
works by parsing the reflog for the message added by previous
git-checkout invocations. We expand the @{-N} to the branch name, so
that you end up on an attached HEAD on that branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add is_regex_special(), a character class macro for chars that have a
special meaning in regular expressions.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace isspecial() by the new macro is_glob_special(), which is more,
well, specialized. The former included the NUL char in its character
class, while the letter only included characters that are special to
file name globbing.
The new name contains underscores because they enhance readability
considerably now that it's made up of three words. Renaming the
function is necessary to document its changed scope.
The call sites of isspecial() are updated to check explicitly for NUL.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enhance the readability of ctype.c by using an enum instead of macros
to initialize the character class table. This allows the use of a single
letter to mark a char, making the table fit within 80 columns.
Also list the index of the last entry in each row in the following comment.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Manipulating the character class table in ctype.c by hand is error prone.
To ensure that typos are found quickly, add a test program and script.
test-ctype checks the output of the character class macros isspace() et.
al. by applying them on all possible char values and consulting a list of
all characters in the particular class. It doesn't check tolower() and
toupper(); this could be added later.
The test script t0070-fundamental.sh is created because there is no good
place for the ctype test, yet -- except for t0000-basic.sh perhaps, but
it doesn't run well on Windows, yet.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both 'git log' and 'show' have the same '--pretty=<format>' option
with the same formats. So refactor these formats into a common
variable.
While at it, also add 'format:' to the list.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__gitcomp takes care of it since 5447aac7 (bash: fix long option with
argument double completion, 2008-03-05)
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function lock_remote() sends MKCOL requests to make leading
directories; However, if it does not put a forward slash '/' at the end of
the path, the server sends a 301 redirect.
By leaving the '/' in place, we can avoid this additional step.
Incidentally, at least one version of Curl (7.16.3) does not resend
credentials when it follows a 301 redirect, so this commit also fixes
a bug.
Original patch by Tay Ray Chuan <rctay89@gmail.com>.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When getting the result of remote_ls(), we were advancing the variable
"path" to the relative path inside the repository.
However, then we went on to malloc a bogus amount of memory: we were
subtracting the prefix length _again_, quite possibly getting something
negative, which xmalloc() interprets as really, really much.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes the description of the -t option in git-mergetool, which
failed to hint that it takes an argument.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the only colors available to --pretty=format
users are red, green, and blue. Rather than expand it with a
few new colors, this patch makes the usual config color
syntax available, including more colors, backgrounds, and
attributes.
Because colors are no longer bounded to a single word (e.g.,
%Cred), this uses a more advanced syntax that features a
beginning and end delimiter (but the old syntax still
works). So you can now do:
git log --pretty=tformat:'%C(yellow)%h%C(reset) %s'
to emulate --pretty=oneline, or even
git log --pretty=tformat:'%C(cyan magenta bold)%s%C(reset)'
if you want to relive the awesomeness of 4-color CGA.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have very featureful color-parsing routines which are
used for color.diff.* and other options. Let's make it
easier to use those routines from other parts of the code.
This patch adds a color_parse_mem() helper function which
takes a length-bounded string instead of a NUL-terminated
one. While the helper is only a few lines long, it is nice
to abstract this out so that:
- callers don't forget to free() the temporary buffer
- right now, it is implemented in terms of color_parse().
But it would be more efficient to reverse this and
implement color_parse in terms of color_parse_mem.
This also changes the error string for an invalid color not
to mention the word "config", since it is not always
appropriate (and when it is, the context is obvious since
the offending config variable is given).
Finally, while we are in the area, we clean up the parameter
names in the declaration of color_parse; the var and value
parameters were reversed from the actual implementation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command line options can share the same paragraph of description, if
they are related or synonymous. In these cases they should be written
among each other, so that asciidoc can format them itself.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-commit tries to remove the file ./COMMIT_EDITMSG instead of
$GIT_DIR/COMMIT_EDITMSG after commit preparation (e.g. running
hooks, launching editor).
This behavior exists since f5bbc3225c "Port git commit to C".
Some test cases (e.g. t/t7502-commit.sh) rely on the existence of
$GIT_DIR/COMMIT_EDITMSG after committing and, I guess, many people
are used to it. So it is best not to remove it.
This patch just removes the removal of COMMIT_EDITMSG.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A function that runs a hook is used in several Git commands.
builtin-commit.c has the one that is most general for cases without
piping. The one in builtin-gc.c prints some useful warnings.
This patch moves a merged version of these variants into libgit and
lets the other builtins use this libified run_hook().
The run_hook() function used in receive-pack.c feeds the standard
input of the pre-receive or post-receive hooks. This function is
renamed to run_receive_hook() because the libified run_hook() cannot
handle this.
Mentored-by: Daniel Barkalow <barkalow@iabervon.org>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of
git init
echo exit >.git/hooks/post-checkout
chmod +x .git/hooks/post-checkout
touch foo
git add foo
rm foo
git checkout -- foo
git-checkout resulted in a Segmentation fault, because there is no new
branch set for the post-checkout hook.
This patch makes use of the null SHA as it is set for the old branch.
While at it, I removed the xstrdup() around the sha1_to_hex(...) calls
in builtin-checkout.c/post_checkout_hook() because sha1_to_hex()
uses four buffers for the hex-dumped SHA and we only need two.
(Duplicating one buffer is only needed if we need more than four.)
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the --color-words splitting regular expression configurable via
the diff driver's 'wordregex' attribute. The user can then set the
driver on a file in .gitattributes. If a regex is given on the
command line, it overrides the driver's setting.
We also provide built-in regexes for the languages that already had
funcname patterns, and add an appropriate diff driver entry for C/++.
(The patterns are designed to run UTF-8 sequences into a single chunk
to make sure they remain readable.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We silently truncate a match at the newline, which may lead to
unexpected behaviour, e.g., when matching "<[^>]*>" against
<foo
bar>
since then "<foo" becomes a word (and "bar>" doesn't!) even though the
regex said only angle-bracket-delimited things can be words.
To alleviate the problem slightly, use REG_NEWLINE so that negated
classes can't match a newline. Of course newlines can still be
matched explicitly.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some applications, words are not delimited by white space. To
allow for that, you can specify a regular expression describing
what makes a word with
git diff --color-words='[A-Za-z0-9]+'
Note that words cannot contain newline characters.
As suggested by Thomas Rast, the words are the exact matches of the
regular expression.
Note that a regular expression beginning with a '^' will match only
a word at the beginning of the hunk, not a word at the beginning of
a line, and is probably not what you want.
This commit contains a quoting fix by Thomas Rast.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Up until now, the color-words code assumed that word boundaries are
identical to white space characters.
Therefore, it could get away with a very simple scheme: it copied the
hunks, substituted newlines for each white space character, called
libxdiff with the processed text, and then identified the text to
output by the offsets (which agreed since the original text had the
same length).
This code was ugly, for a number of reasons:
- it was impossible to introduce 0-character word boundaries,
- we had to print everything word by word, and
- the code needed extra special handling of newlines in the removed part.
Fix all of these issues by processing the text such that
- we build word lists, separated by newlines,
- we remember the original offsets for every word, and
- after calling libxdiff on the wordlists, we parse the hunk headers, and
find the corresponding offsets, and then
- we print the removed/added parts in one go.
The pre and post samples in the test were provided by Santi Béjar.
Note that there is some strange special handling of hunk headers where
one line range is 0 due to POSIX: in this case, the start is one too
low. In other words a hunk header '@@ -1,0 +2 @@' actually means that
the line must be added after the _second_ line of the pre text, _not_
the first.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Word splitting is now performed by the function diff_words_fill(),
avoiding having the same code twice.
In the same spirit, avoid duplicating the code of ALLOC_GROW().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have to set the color before every line and reset it before every
newline. Add a function color_fwrite_lines() which does that for us.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t3404: Add test case for auto-amending only edited commits after "edit"
t3404: Add test case for aborted --continue after "edit"
t3501: check that commits are actually done
* maint-1.6.0:
t3404: Add test case for auto-amending only edited commits after "edit"
t3404: Add test case for aborted --continue after "edit"
t3501: check that commits are actually done
Add a test case for the bugfix introduced by commit c14c3c82d
"git-rebase--interactive: auto amend only edited commit".
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test case for the bugfix introduced by commit 8beb1f33d
"git-rebase-interactive: do not squash commits on abort".
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The basic idea of t3501 is to check whether revert
and cherry-pick works on renamed files.
But as there is no pure cherry-pick/revert test, it is
good to also check if commits are actually done in that
scenario.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a few simple comments above commands that take arguments. These
comments are meant to remind developers of potential problems that
can occur when the script is sourced on systems with "set -u." Any
function which requires arguments really ought to be called with
explicit arguments given.
Also adds a #!bash to the top of bash completions so that editing
software can always identify that the file is of sh type.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a git completion is not found, a bash shell should try bash-type
completions first before going to standard filetype completions. This
patch adds "-o bashdefault" to the completion line. If that option is
not available, it uses the old method.
This behavior was inspired by Mercurial's bash completion script.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Under "set -u" semantics, it is an error to access undefined variables.
Some user environments may enable this setting in the interactive shell.
In any context where the completion functions access an undefined
variable, accessing a default empty string (aka "${1-}" instead of "$1")
is a reasonable way to code the function, as it silences the undefined
variable error while still supplying an empty string.
In this patch, functions that should always take an argument still use
$1. Functions that have optional arguments use ${1-}.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.6.1.1
Make t3411 executable
fix handling of multiple untracked files for git mv -k
add test cases for "git mv -k"
Both versions have the same functionality. This removes any
redundancy.
This also adds makes two extensions to match_pathspec:
- If pathspec is NULL, return 1. This reflects the behavior of git
commands, for which no paths usually means "match all paths".
- If seen is NULL, do not use it.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If pathspec already matched exactly, it cannot match any more.
Originally, we had to continue anyways, because we did not
differentiate between exact, recursive and globbing matches.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The line length was read from the same position every time,
causing mangled output when printing notes with multiple lines.
Also, adding new-line manually for each line ensures that we
get a new-line between commits, matching git-log for commits
without notes.
Signed-off-by: Tor Arne Vestbø <tavestbo@trolltech.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-k" option to "git mv" should allow specifying multiple untracked
files. Currently, multiple untracked files raise an assertion if they
appear consecutively as arguments. Fix this by decrementing the loop
index after removing one entry from the array of arguments.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test cases for ignoring nonexisting and untracked files using the -k
option to "git mv". There is one known breakage related to multiple
untracked files specfied as consecutive arguments.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"S_IFREG | mode" makes only sense for 0644 and 0755.
Even though doing (S_IFREG | mode) may not hurt when mode is any other
supported value, that is only true because S_IFREG mode bit happens to
be already on for S_IFLNK or S_IFGITLINK.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message to Error::Simple() must be passed as a single argument.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/maint-merge-recursive-fix:
merge-recursive: do not clobber untracked working tree garbage
modify/delete conflict resolution overwrites untracked file
Conflicts:
builtin-merge-recursive.c
Prior to that, if the user chose "squash" as a first action, the stderr
looked like:
grep: /home/madcoder/dev/scm/git/.git/rebase-merge/done: No such file or directory
Cannot 'squash' without a previous commit
Now the first line is gone.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some instances replaced by "handful of", others use
the word "few", a couple get a slight rewording.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is only used from "sha1_file.c".
And as we want to add a "replace_object" hook in "read_sha1_file",
we must not let people bypass the hook using something other than
"read_sha1_file".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The path format was inconsistent with the one used in git-notes.sh: it
supposedly split the sha1 in the same 2/38 format that .git/objects
uses, but the code uses the full sha1 without a path separator.
While at it, also fix a grammatical error.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Vim's SVN repository doesn't offer the latest runtime files, since
normally they are only updated there on a release. Though currently
there is no difference between the SVN and HTTP/FTP version of the git
syntax files.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We attempt to give an explanation of the status of the files in this
directory.
Signed-off-by: jidanni <jidanni@jidanni.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without any explicit -o parameter, we correctly avoided putting the
resulting patch output to the toplevel. We should do the same when
the user gave a relative pathname to be consistent with this case.
Noticed by Cesar Eduardo Barros.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At present we do headers unfolding (see RFC822 3.1.1. LONG HEADER FIELDS) for
all fields except 'From' (always) and 'Subject' (when keep_subject is set)
Not unfolding 'From' is a bug -- see above-mentioned RFC link.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thanks to a200337 (git-am: propagate -C<n>, -p<n> options as well,
2008-12-04) and commits around it, "git am" is equipped to correctly
propagate the command line flags such as -C/-p/-whitespace across a patch
failure and restart.
It is trivial to support --directory option now, resurrecting previous
attempts by Kevin and Simon.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the new option depends on --onto and omission of <upstream>, use
a separate invocation style, and omit most options to save space.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-rebase -i a new option --root, which instructs it to rebase
the entire history leading up to <branch>. This is mainly for
symmetry with ordinary git-rebase; it cannot be used to edit the root
commit in-place (it requires --onto <newbase>). Commits that already
exist in <newbase> are skipped.
In the normal mode of operation, this is fairly straightforward. We
run cherry-pick in a loop, and cherry-pick has supported picking the
root commit since f95ebf7 (Allow cherry-picking root commits,
2008-07-04).
In --preserve-merges mode, we track the mapping from old to rewritten
commits and use it to update the parent list of each commit. In this
case, we define 'rebase -i -p --root --onto $onto $branch' to rewrite
the parent list of all root commit(s) on $branch to contain $onto
instead.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-rebase a new option --root, which instructs it to rebase the
entire history leading up to <branch>. This option must be used with
--onto <newbase>, and causes commits that already exist in <newbase>
to be skipped. (Normal operation skips commits that already exist in
<upstream> instead.)
One possible use-case is with git-svn: suppose you start hacking
(perhaps offline) on a new project, but later notice you want to
commit this work to SVN. You will have to rebase the entire history,
including the root commit, on a (possibly empty) commit coming from
git-svn, to establish a history connection. This previously had to
be done by cherry-picking the root commit manually.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-notes have the potential of being pretty expensive, so test with
a lot of commits. A lot. So to make things cheaper, you have to
opt-in explicitely, by setting the environment variable
GIT_NOTES_TIMING_TESTS.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To avoid looking up each and every commit in the notes ref's tree
object, which is very expensive, speed things up by slurping the tree
object's contents into a hash_map.
The idea fo the hashmap singleton is from David Reiss, initial
benchmarking by Jeff King.
Note: the implementation allows for arbitrary entries in the notes
tree object, ignoring those that do not reference a valid object. This
allows you to annotate arbitrary branches, or objects.
[jc: fixed an obvious error in initialize_hash_map()]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I'm not sure how often this functionality is used, but in case
it's not, having an extra test here will help catch breakage
sooner.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c40641b77b, 'Optimize
symlink/directory detection' by Linus Torvalds, removed the 'char
*symcache' parameter to the has_symlink_leading_path() function. This
made all variables currently named 'symcache' inside diff-lib.c
unnecessary.
This also let us throw away the 'struct oneway_unpack_data', and
instead directly use the 'struct rev_info *revs' member, which
was the only member left after removal of the 'symcache[] array'
member. The 'struct oneway_unpack_data' was introduced by the
following commit:
948dd346 "diff-files: careful when inspecting work tree items"
Impact: cleanup
PATH_MAX bytes less memory stack usage in some cases
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The die() message updated accordingly.
The previous behaviour was to only allow cloning when the destination
directory doesn't exist.
[jc: added trivial tests]
Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new inline function is_dot_or_dotdot is used to check if the
directory name is either "." or "..". It returns a non-zero value if
the given string is "." or "..". It's applicable to a lot of Git
source code.
Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We try to keep lines under 80 characters, not to mention
that sticking a bunch of stuff on one line makes diffs
messier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
R. Tyler Ballance reported a mysterious transient repository corruption;
after much digging, it turns out that we were not catching and reporting
memory allocation errors from some calls we make to zlib.
This one _just_ wraps things; it doesn't do the "retry on low memory
error" part, at least not yet. It is an independent issue from the
reporting. Some of the errors are expected and passed back to the caller,
but we die when zlib reports it failed to allocate memory for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When native language (RU) is in use, subject header usually contains several
parts, e.g.
Subject: [Navy-patches] [PATCH]
=?utf-8?b?0JjQt9C80LXQvdGR0L0g0YHQv9C40YHQvtC6INC/0LA=?=
=?utf-8?b?0LrQtdGC0L7QsiDQvdC10L7QsdGF0L7QtNC40LzRi9GFINC00LvRjyA=?=
=?utf-8?b?0YHQsdC+0YDQutC4?=
This exposes several bugs in builtin-mailinfo.c:
1. decode_b_segment: do not append explicit NUL -- explicit NUL was preventing
correct header construction on parts concatenation via strbuf_addbuf in
decode_header_bq. Fixes:
-Subject: Изменён список пакетов необходимых для сборки
+Subject: Изменён список па
Then
2. Do not emit '\n' between "encoded-word" where RFC2046 says that linear
white space between them are ignored when displaying. Fixes:
-Subject: Изменён список пакетов необходимых для сборки
+Subject: Изменён список па кетов необходимых для сборки
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--signoff" test case in t7500-commit.sh was setting VISUAL while
using -F -, which indeed tested that the editor is not spawned with -F.
However, having it there was confusing, since there was no obvious reason
to the casual reader for it to be there.
This commits removes the setting of VISUAL from the --signoff test, and
adds in t7501-commit.sh a dedicated test case, where the rest of tests for
-F are.
Signed-off-by: Adeodato Simó <dato@net.com.org.es>
Okay-then-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suggest opml.xml as name for OPML view by providing the appropriate
header, consistently with similar usage in project_index view.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even without --root specified, if the range given on the command line
happens to include a root commit, we should include its patch text in the
output.
This fix deliberately ignores log.showroot configuration variable because
"format-patch" and "log -p" can and should behave differently in this
case, as the former is about exporting a part of your history in a form
that is replayable elsewhere and just giving the commit log message
without the patch text does not make any sense for that purpose.
Noticed and fix originally attempted by Nathan W. Panike; credit goes to
Alexander Potashev for injecting sanity to my initial (broken) fix that
used the value from log.showroot configuration, which was misguided.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_commit_non_empty_tree is added to the functions that can be run from
commit filters. Its effect is to commit only commits actually touching the
tree and that are not merge points either.
The option --prune-empty is added. It defaults the commit-filter to
'git_commit_non_empty_tree "$@"', and can be used with any other
combination of filters, except --commit-hook that must used
'git_commit_non_empty_tree "$@"' where one puts 'git commit-tree "$@"'
usually to achieve the same result.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous "parse-opt"ification broke git-apply reading from the
standard input. "git apply A - C <B" is supposed to read patches from
files A, B and C in this order.
Before "parse-opt"ification, we used be able to:
git apply --stat - --apply <A B
to read the patch from file A, showing only the diffstat, and then read the
patch from file B, showing the diffstat and actually applying it. Even
with this fix we cannot do that anymore, but that is so crazy use case I
do not think anybody sane relied on such a broken behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the new flag "fixed" to struct grep_pat and set it if the pattern
is doesn't contain any regex control characters in addition to if the
flag -F/--fixed-strings was specified.
This gives a nice speed up on msysgit, where regexec() seems to be
extra slow. Before (best of five runs):
$ time git grep grep v1.6.1 >/dev/null
real 0m0.552s
user 0m0.000s
sys 0m0.000s
$ time git grep -F grep v1.6.1 >/dev/null
real 0m0.170s
user 0m0.000s
sys 0m0.015s
With the patch:
$ time git grep grep v1.6.1 >/dev/null
real 0m0.173s
user 0m0.000s
sys 0m0.000s
The difference is much smaller on Linux, but still measurable.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep -w accepts matches between non-word characters, only. If a match
from regexec() doesn't meet this criteria, grep continues its search
after the first character of that match.
We can be a bit smarter here and skip all positions that follow a word
character first, as they can't match our criteria. This way we can
consume characters quite cheaply and don't need to special-case the
handling of the beginning of a line.
Here's a contrived example command on msysgit (best of five runs):
$ time git grep -w ...... v1.6.1 >/dev/null
real 0m1.611s
user 0m0.000s
sys 0m0.015s
With the patch it's quite a bit faster:
$ time git grep -w ...... v1.6.1 >/dev/null
real 0m1.179s
user 0m0.000s
sys 0m0.015s
More common search patterns will gain a lot less, but it's a nice clean
up anyway.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using "git status -v", the diff output wasn't colored, even though
color.ui was set. Only when setting color.diff it worked.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using "git commit" and there was nothing to commit (the editor
wasn't launched), the status output wasn't colored, even though color.ui
was set. Only when setting color.status it worked.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit teaches Git to produce diff output using the patience diff
algorithm with the diff option '--patience'.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patience diff algorithm produces slightly more intuitive output
than the classic Myers algorithm, as it does not try to minimize the
number of +/- lines first, but tries to preserve the lines that are
unique.
To this end, it first determines lines that are unique in both files,
then the maximal sequence which preserves the order (relative to both
files) is extracted.
Starting from this initial set of common lines, the rest of the lines
is handled recursively, with Myers' algorithm as a fallback when
the patience algorithm fails (due to no common unique lines).
This patch includes memory leak fixes by Pierre Habouzit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We forgot to move to the next argument when parsing -q, getting stuck
in an endless loop.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-blame:
gitweb: cache $parent_commit info in git_blame()
gitweb: A bit of code cleanup in git_blame()
gitweb: Move 'lineno' id from link to row element in git_blame
We need to parse options before we can see if --exit-code was
provided.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Accept -- as an "end of options" marker even when using --no-index.
Previously, the -- triggered a "normal" index/tree diff and subsequently
failed because of the unrecognized (in that mode) --no-index.
Note that the second loop can treat '--' as a normal option, because
the preceding checks ensure it is the third-to-last argument.
While at it, fix the parsing of "-q" option in --no-index mode as well.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make all strbuf functions that can fail free() their memory on error if
they have allocated it. They don't shrink buffers that have been grown,
though.
This allows for easier error handling, as callers only need to call
strbuf_release() if A) the command succeeded or B) if they would have had
to do so anyway because they added something to the strbuf themselves.
Bonus hunk: document strbuf_readlink.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit message parser of git shortlog used to treat only the first
non-empty line of the commit message as the subject. Other log commands
(e.g. --pretty=oneline) show the whole first paragraph instead (unwrapped
into a single line).
For consistency, this patch borrows format_subject() from pretty.c to
make shortlog do the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With PATH_INFO urls, actions for the projects list (e.g. opml,
project_index) were being put in the URL right after the base. The
resulting URL is not properly parsed by gitweb itself, since it expects
a project name as first component of the URL.
Accepting global actions in use_pathinfo is not a very robust solution
due to possible present and future conflicts between project names and
global actions, therefore we just refuse to create PATH_INFO URLs when
the project is not defined.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
LF at the end of format strings given to die() is redundant because
die already adds one on its own.
Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
help_unknown_cmd() is able to autocorrect a command to an alias, and not
only to internal or external commands. However, main() was not passing the
autocorrected command through handle_alias(), hence it failed if it was an
alias.
This commit makes the autocorrected command go through handle_alias(), once
handle_internal_command() and execv_dashed_external() have been tried. Since
this is done twice in main() now, moved that logic to a new run_argv()
function.
Also, print the same "Expansion of alias 'x' failed" message when the alias
was autocorrected, rather than a generic "Failed to run command 'x'".
Signed-off-by: Adeodato Simó <dato@net.com.org.es>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the only caller, verify_absent, relies on the fact that o->pos
points to the next index entry anyways, there is no need to recompute
its position.
Furthermore, if a nondirectory entry were found, this would return too
early, because there could still be an untracked directory in the way.
This is currently not a problem, because verify_absent is only called
if the index does not have this entry.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0cf73755 (unpack-trees.c: assume submodules are clean during
check-out) changed an argument to verify_absent from 'path' to 'ce',
which is however shadowed by a local variable of the same name.
The bug triggers if verify_absent is used on a tree entry, for which
the index contains one or more subsequent directories of the same
length. The affected subdirectories are removed from the index. The
testcase included in this commit bisects to 55218834 (checkout: do not
lose staged removal), which reveals the bug in this case, but is
otherwise unrelated.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 203a2fe1 (Allow callers of unpack_trees() to handle failure)
changed the "die on error" behavior to "return failure code".
verify_absent did not handle errors returned by
verify_clean_subdirectory, however.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tar handles switches with and witout preceding '-', but the
documentation should be consistent nonetheless.
Signed-off-by: Henrik Austad <henrik@austad.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Linux kernel and Emacs are both spelled capitalized
Signed-off-by: Henrik Austad <henrik@austad.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Mac OS X and possibly BSDs, /bin/pwd reads PWD from the environment if
available and shows the logical path by default rather than the physical
one.
Unset PWD before running /bin/pwd in both cd_to_toplevel and its test.
Still use the external /bin/pwd because in my Bash on Linux, the builtin
pwd prints the same result whether or not PWD is set.
Signed-off-by: Marcel M. Cary <marcel@oak.homeunix.org>
Tested-by: Wincent Colaiuta <win@wincent.com> (on Mac OS X 10.5.5)
Tested-by: Marcel Koeppen <git-dev@marzelpan.de> (on Mac OS X 10.5.6)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CVS username is generated from local part email address.
We take the whole local part but restrict the character set to the
Portable Filename Character Set, which is used for Unix login names
according to Single Unix Specification v3.
This will obviously report different usernames from existing repositories
for commits with the local part of the author e-mail address that contains
characters outside the PFCS. Hopefully this won't break an old CVS
checkout from an earlier version of git-cvsserver, because the names are
always shown afresh to the CVS clients and not kept on the client side.
Signed-off-by: Fabian Emmes <fabian.emmes@rwth-aachen.de>
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to extract the tagger information "by hand" in "git show <tag>",
but the function pp_user_info() already does that. Even better:
it respects the commit_format and date_format specified by the user.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It comes quite as a surprise to an unsuspecting Git user that calling
"git add submodule/file" (which is a mistake, alright) _removes_
the submodule in the index, and adds the file. Instead, complain loudly.
While at it, be nice when the user said "git add submodule/" which is
most likely the consequence of tab-completion, and stage the submodule,
instead of trying to add the contents of that directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With options such as "--all --since=2.weeks.ago", annotated tags used to
be included, when they should have been excluded. The reason is that we
heavily abuse the revision walker to determine what needs to be included
or excluded. And the revision walker does not show tags at all (and
therefore never marks tags as uninteresting).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the OPML project list view was hand-coding the RSS and HTML URLs,
it didn't respect global options such as use_pathinfo. Make it use
href() to ensure consistency with the rest of the gitweb setup.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that Cygwin sets the variable SESSIONNAME when an interactive
desktop session is running, and does not set it when you log in via ssh.
So we can use this variable to determine whether to run gitk or git log
in git bisect view.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the pre-rebase-hook would be launched before we knew if
the <upstream> [<branch>] arguments were supplied.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cvsserver annotates each commit message by "via git-CVS emulator". This is
made configurable via gitcvs.commitmsgannotation.
Signed-off-by: Fabian Emmes <fabian.emmes@rwth-aachen.de>
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout -b newbranch $commit^{tree}" mistakenly created a new branch
rooted at the current HEAD, because in that case, the two structure fields
used to see if the command was invoked without any argument (hence it
needs to default to checking out the HEAD) were populated incorrectly.
Upon seeing a command line argument that we took as a rev, we should store
that string in new.name, even if that does not name a commit. This will
correctly trigger the existing safety logic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
A git patch that does not change the executable bit records the mode bits
on its "index" line. "git apply" used to interpret this mode exactly the
same way as it interprets the mode recorded on "new mode" line, as the
wish by the patch submitter to set the mode to the one recorded on the
line.
The reason the mode does not agree between the submitter and the receiver
in the first place is because there is _another_ commit that only appears
on one side but not the other since their histories diverged, and that
commit changes the mode. The patch has "index" line but not "new mode"
line because its change is about updating the contents without affecting
the mode. The application of such a patch is an explicit wish by the
submitter to only cherry-pick the commit that updates the contents without
cherry-picking the commit that modifies the mode. Viewed this way, the
current behaviour is problematic, even though the command does warn when
the mode of the path being patched does not match this mode, and a careful
user could detect this inconsistencies between the patch submitter and the
patch receiver.
This changes the semantics of the mode recorded on the "index" line;
instead of interpreting it as the submitter's wish to set the mode to the
recorded value, it merely informs what the mode submitter happened to
have, and the presense of the "index" line is taken as submitter's wish to
keep whatever the mode is on the receiving end.
This is based on the patch originally done by Alexander Potashev with a
minor fix; the tests are mine.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not a good practice to prefer performance over readability in
something as performance uncritical as finding the trailing slash
of argv[0].
So avoid head-scratching by making the loop user-readable, and not
hyper-performance-optimized.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The repository constructor mistakenly rewrote a Directory parameter that
Perl happens to evaluate to false (e.g. "0") to ".".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/mergetool:
mergetool: Don't keep temporary merge files unless told to
mergetool: Add prompt to continue after failing to merge a file
Add -y/--no-prompt option to mergetool
Fix some tab/space inconsistencies in git-mergetool.sh
When there is no grace period before pruning unreferenced objects, it is
pointless to push those objects in their loose form just to delete them
right away.
Also be more explicit about the possibility of using "now" in the
gc.pruneexpire config variable (needed for the above behavior to
happen).
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The upstream branch <upstream> now defaults to the first tracked
remote branch, which is set by the configuration variables
branch.<name>.remote and branch.<name>.merge of the current branch.
Without such a remote branch, the command "git cherry [-v]" fails with
usage output as before and an additional message.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make insert_one_record() use string_list_append(), instead of duplicating
its code. Because of this, do not free the "util" member when clearing the
"onelines" string lists: with the new code path it is not initialized to
any value (was being initialized to NULL previously).
Also, avoid unnecessary strdup() calls when inserting names in log->list.
This list always has "strdup_strings" activated, hence strdup'ing namebuf is
unnecessary. This change also removes a latent memory leak in the old code.
NB: The duplicated code mentioned above predated the appearance of
string_list_append().
Signed-off-by: Adeodato Simó <dato@net.com.org.es>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only incompatible change is that the user how have to use '--'
before a patch file if it is named "--build-fake-ancestor=something".
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* np/auto-thread:
Force t5302 to use a single thread
pack-objects: don't use too many threads with few objects
autodetect number of CPUs by default when using threads
Instead of listing short option (e.g. "-U<n>") as a shorthand for its
longer counterpart (e.g. "--unified=<n>"), list the synonyms together. It
saves one indirection to find what the reader wants.
Signed-off-by: jidanni <jidanni@jidanni.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable was added in 5f8b9fc (git-send-email: add a new
sendemail.cc configuration variable, 2008-04-27), but is not yet refered
to by the documentation.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge two hunks if there is only the specified number of otherwise unshown
context between them. For --inter-hunk-context=1, the resulting patch has
the same number of lines but shows uninterrupted context instead of a
context header line in between.
Patches generated with this option are easier to read but are also more
likely to conflict if the file to be patched contains other changes.
This patch keeps the default for this option at 0. It is intended to just
make the feature available in order to see its advantages and downsides.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"makeinfo" failed to generate gitman.info from gitman.texi input file
because the combined manual page file contains several nodes with the
same name (DESCRIPTION, OPTIONS, SEE ALSO etc.). An Info document should
contain unique node names.
This patch creates a simple (read: ugly) work-around by suppressing the
validation of the final Info file. Jumping to nodes in the Info document
still works but they are not very useful. Common man-page headings like
DESCRIPTION and OPTIONS appear in the Info node list and they point to
the man page where they appear first (that is git-add currently).
Also, this patch adds directory-entry information for Info document to
make the document appear in the top-level Info directory.
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously "docbook2x-texi" failed to generate user-manual.texi and
gitman.texi files from .xml input files because "iconv" stopped at
"illegal input sequence" error. This was due to some UTF-8 octets in the
input .xml files. This patch adds option --encoding=UTF-8 for
"docbook2x-texi" to allow the building of .texi files complete.
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When $filter was empty, the path passed to check_export_ok would
contain an extra '/', which some implementations of export_auth_hook
are sensitive to.
It makes more sense to fix this here than to handle the special case
in each implementation of export_auth_hook.
Signed-off-by: Devin Doucette <devin@doucette.cc>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Assume unchanged" bit means "please pretend that I have never touched
this file", so if user removes the file, we should not care.
This patch teaches "git grep" to use cache version in such
situations. External grep case has not been fixed yet. But given that
on the platform that CE_VALID bit may be used like Windows, external
grep is not available anyway, I would wait for people to raise their
hands before touching it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-send-email.txt: move --format-patch paragraph to a proper location
git-shortlog.txt: improve documentation about .mailmap files
pretty: support multiline subjects with format:
pretty: factor out format_subject()
pretty: factor out skip_empty_lines()
merge-file: handle freopen() failure
daemon: cleanup: factor out xstrdup_tolower()
daemon: cleanup: replace loop with if
daemon: handle freopen() failure
describe: Avoid unnecessary warning when using --all
When introducing --format-patch, its documentation was accidentally inserted
in the middle of documentation for --validate.
Signed-off-by: Adeodato Simó <dato@net.com.org.es>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description on .mailmap made it seem like they are only useful for
commits with a wrong address for an author, but they are about fixing the
real name. Explain this better in the text, and replace the existing
example with a new one that hopefully makes things clearer.
Signed-off-by: Adeodato Simó <dato@net.com.org.es>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git log --pretty=format:%s (and tformat:) used to display the first
line of the subject, unlike the other --pretty options, which would
construct a subject line from all lines of the first paragraph of
the commit message.
For consistency and increased code reuse, change format: to do the
same as the other options.
Before:
$ git log --pretty=oneline v1.6.1 | md5sum
7c0896d2a94fc3315a0372b9b3373a8f -
$ git log --pretty=tformat:"%H %s" v1.6.1 | md5sum
298903b1c065002e15daa5329213c51f -
After:
$ git log --pretty=tformat:"%H %s" v1.6.1 | md5sum
7c0896d2a94fc3315a0372b9b3373a8f -
$ git log --pretty=oneline v1.6.1 | md5sum
7c0896d2a94fc3315a0372b9b3373a8f -
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next patch will use it.
In the version that was factored out, we can't rely on the len of the
struct strbuf to find out if a line separator needs to be added, as
it might already contain something. Add a guard variable ("first")
instead.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Report the error if redirection of stderr to /dev/null failed.
This silences a compiler warning about ignoring the return value
of freopen() on Ubuntu 8.10.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add xstrdup_tolower(), a helper to get a lower case copy of a
string, and use it in two cases.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace a loop around an enter_repo() call, which was used to retry
a single time with a different parameter in case the first call fails,
with two calls and an if. This is shorter and cleaner.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Die if stderr couldn't be sent to /dev/null when operating in inetd
mode and report the error message from the OS.
This fixes a compiler warning about the return value of freopen()
being ignored on Ubuntu 8.10.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 212945d4 ("Teach git-describe to verify annotated tag names
before output") git-describe learned how to output a warning if
an annotated tag object was matched but its internal name doesn't
match the local ref name.
However, "git describe --all" causes the local ref name to be
prefixed with "tags/", so we need to skip over this prefix before
comparing the local ref name with the name recorded inside of the
tag object.
Patch-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The established behaviour of "git ls-tree $tree_ish" run from a subdirectory
"sub/dir" in a work tree is to limit the output to the paths in the
subdirectory, and strip off the leading "sub/dir" from the output, since
3c5e846 (ls-tree: major rewrite to do pathspec, 2005-11-26).
This was a "usability" feature made back in the days when the line between
Porcelain and plumbing was blurry, and in retrospect, it probably was
misguided. The behaviour may be what the end user would expect when the
command is run interactively from a subdirectory, but it also means that a
scripted Porcelain that wants to use the command to list the full contents
of a tree object has to do cd_to_toplevel (and save the output from
"rev-parse --show-prefix" before doing so, so that it can be used as a
pathspec if it wants to limit its operation to the original subdirectory
in other commands).
This new option makes the command operate on the full tree object,
regardless of where in the work tree it is run from. It also implies the
behaviour that is triggered by the existing --full-name option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a file was renamed in one branch, but deleted in the other, one
should expect the index to contain an unmerged entry, namely the
target of the rename. Make it so.
Noticed by Constantine Plotnikov.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The program calls remote_ls() to get list of files from the server over
HTTP; handle_remote_ls_ctx() is used to parse its response to populate
"struct remote_ls_ctx" that is returned from remote_ls().
The handle_remote_ls_ctx() function assumed that the server returns a
local path in href field, but RFC 4918 (14.7) demand of support full URI
(e.g. "http://localhost:8080/repo.git").
This resulted in push failure (e.g. git-http-push issues a PROPFIND
request to "/repo.git/alhost:8080/repo.git/refs/" to the server).
Signed-off-by: Kirill A. Korinskiy <catap@catap.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script 'git notes' allows you to edit and show commit notes, by
calling either
git notes show <commit>
or
git notes edit <commit>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit notes are blobs which are shown together with the commit
message. These blobs are taken from the notes ref, which you can
configure by the config variable core.notesRef, which in turn can
be overridden by the environment variable GIT_NOTES_REF.
The notes ref is a branch which contains "files" whose names are
the names of the corresponding commits (i.e. the SHA-1).
The rationale for putting this information into a ref is this: we
want to be able to fetch and possibly union-merge the notes,
maybe even look at the date when a note was introduced, and we
want to store them efficiently together with the other objects.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We link to patch view in commit and commitdiff view, and to patches view
in log and shortlog view.
In (short)log view, the link is only offered when the number of commits
shown is no more than the allowed maximum number of patches.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only difference between patch and patches view is in the treatement
of single commits: the former only displays a single patch, whereas the
latter displays a patchset leading to the specified commit.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we are going to introduce an additional parameter for
git_commitdiff to tune patch view, we switch to named/hash-based
parameter passing for clarity and robustness.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of commitdiff_plain is not intended for git-am:
* when given a range of commits, commitdiff_plain publishes a single
patch with the message from the first commit, instead of a patchset
* the hand-built email format replicates the commit summary both as
email subject and as first line of the email itself, resulting in
a duplication if the output is used with git-am.
We thus create a new view that can be fed to git-am directly, allowing
patch exchange via gitweb. The new view exposes the output of git
format-patch directly, limiting it to a single patch in the case of a
single commit.
A configurable upper limit defaulting to 16 is imposed on the number of
commits which will be included in a patchset, to prevent DoS attacks on
the server. Setting the limit to 0 will disable the patch view, setting
it to a negative number will remove the limit.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The boolean feature subroutines behaved identically except for the
name of the configuration option, so make that a parameter and unify
them.
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the packs are made using multiple threads, they are no longer identical
on the 4-core Xeon I tested on.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/maint-merge-recursive-fix:
merge-recursive: do not clobber untracked working tree garbage
modify/delete conflict resolution overwrites untracked file
When merge-recursive wanted to create a new file in the work tree (either
as the final result, or a hint for reference purposes while delete/modify
conflicts), it unconditionally overwrote an untracked file in the working
tree. Be careful not to lose whatever the user has that is not tracked.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a file was removed in HEAD, but modified in MERGE_HEAD, recursive merge
will result in a "CONFLICT (delete/modify)". If the (now untracked) file
already exists and was not added to the index, it is overwritten with the
conflict resolution contents.
In similar situations (cf. test 2), the merge would abort with
"error: Untracked working tree 'file' would be overwritten by merge."
The same should happen in this case.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there are few objects to deltify, they might be split amongst threads
so that there is simply no other objects left to delta against within
the same thread. Let's use the same 2*window treshold as used for the
final load balancing to allow extra threads to be created.
This fixes the benign t5300 test failure.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Tested-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes git mergetool to remove the temporary files used to invoke
the merge tool even if it returns non-zero.
This also adds a configuration option (mergetool.keepTemporaries) to
retain the previous behaviour if desired.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option stops git mergetool from aborting at the first failed merge.
After a failed merge the user will be prompted to indicated whether he
wishes to continue with attempting to merge subsequent paths or to
abort.
This allows some additional use patterns. Merge conflicts can now be
previewed one at time and merges can also be skipped so that they can be
performed in a later pass.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
... and display the actual number of threads used when locally
repacking. A remote server still won't tell you how many threads it
uses during a fetch though.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Luben Tuikov changed 'lineno' link from leading to commit which gave
current version of given block of lines, to leading to parent of this
commit in 244a70e (Blame "linenr" link jumps to previous state at
"orig_lineno"). This made possible data mining using 'blame' view.
The current implementation calls rev-parse once per each blamed line
to find parent revision of blamed commit, even when the same commit
appears more than once, which is inefficient.
This patch mitigates this issue by caching $parent_commit info in
%metainfo, which makes gitweb call rev-parse only once per each
unique commit in the output from "git blame".
In the tables below you can see simple benchmark comparing gitweb
performance before and after this patch
File | L[1] | C[2] || Time0[3] | Before[4] | After[4]
====================================================================
blob.h | 18 | 4 || 0m1.727s | 0m2.545s | 0m2.474s
GIT-VERSION-GEN | 42 | 13 || 0m2.165s | 0m2.448s | 0m2.071s
README | 46 | 6 || 0m1.593s | 0m2.727s | 0m2.242s
revision.c | 1923 | 121 || 0m2.357s | 0m30.365s | 0m7.028s
gitweb/gitweb.perl | 6291 | 428 || 0m8.080s | 1m37.244s | 0m20.627s
File | L/C | Before/After
=========================================
blob.h | 4.5 | 1.03
GIT-VERSION-GEN | 3.2 | 1.18
README | 7.7 | 1.22
revision.c | 15.9 | 4.32
gitweb/gitweb.perl | 14.7 | 4.71
As you can see the greater ratio of lines in file to unique commits
in blame output, the greater gain from the new implementation.
Legend:
[1] Number of lines:
$ wc -l <file>
[2] Number of unique commits in the blame output:
$ git blame -p <file> | grep author-time | wc -l
[3] Time for running "git blame -p" (user time, single run):
$ time git blame -p <file> >/dev/null
[4] Time to run gitweb as Perl script from command line:
$ gitweb-run.sh "p=.git;a=blame;f=<file>" > /dev/null 2>&1
The gitweb-run.sh script includes slightly modified (with adjusted
pathnames) code from gitweb_run() function from the test script
t/t9500-gitweb-standalone-no-errors.sh; gitweb config file
gitweb_config.perl contents (again up to adjusting pathnames; in
particular $projectroot variable should point to top directory of git
repository) can be found in the same place.
Discussion
~~~~~~~~~~
A possible future improvement would be to open a bidi pipe to
"git cat-file --batch-check", (like in Git::Repo in gitweb caching by
Lea Wiemann), feed $long_rev^ to it, and parse its output, which is
in the following form:
926b07e694599d86cec668475071b32147c95034 commit 637
This would mean one call to git-cat-file for the whole 'blame' view,
instead of one call to git-rev-parse per each unique commit in blame
output.
Yet another solution would be to change use of validate_refname() to
validate_revision() when checking script parameters (CGI query or
path_info), with validate_revision being something like the following:
sub validate_revision {
my $rev = shift;
return validate_refname(strip_rev_suffixes($rev));
}
so we don't need to calculate $long_rev^, but can pass "$long_rev^" as
'hb' parameter.
This solution has the advantage that it can be easily adapted to future
incremental blame output.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use dblatex in order to create a pdf version of the git user manual. No
existing Makefile targets (including "all") are touched, so you need to
explicitly say
make pdf
sudo make install-pdf
to get user-manual.pdf created and installed.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Among others, here are the highlights:
* move variable declaration closer to the place it is set and used,
if possible,
* uniquify and simplify coding style a bit, which includes removing
unnecessary '()'.
* check type only if $hash was defined, as otherwise from the way
git_get_hash_by_path() is called (and works), we know that it is
a blob,
* use modern calling convention for git-blame,
* remove unused variable,
* don't use implicit variables ($_),
* add some comments
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move l<line number> ID from <a> link element inside table row (inside
cell element for column with line numbers), to encompassing <tr> table
row element. It was done to make it easier to manipulate result HTML
with DOM, and to be able write 'blame_incremental' view with the same,
or nearly the same result.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit log message for the feature made it sound as if this is a saner
version of --mixed, but the use case presented makes it clear that it is a
better variant of --hard when your changes and somebody else's changes are
mixed together.
Perhaps we would want to rewrite the example that shows the use of --hard
not to talk about recovering from a failed merge?
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a minor change is made while the working directory is in a bit of a
mess, it is somewhat difficult to wade through all of the hunks using git
add --patch. This allows one to jump to the hunk that needs to be staged
without having to respond 'n' to each preceding hunk.
Signed-off-by: William Pursell <bill.pursell@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit implements a rather simple-minded mechanism to display a
one-line summary of the hunks in an array ref. The display consists of
the line numbers and the first changed line, truncated to 80 characters.
20 lines are displayed at a time, and the index of the first undisplayed
line is returned, allowing the caller to display more if desired. (The 20
and 80 should be made configurable.)
Signed-off-by: William Pursell <bill.pursell@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Automatically set THREADED_DELTA_SEARCH when autoconf test detects
support for pthreads on the platform. This will change the default for
some platforms that did not enable threaded delta search previously.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have always had a nice way to reset a working tree to another state
while carrying our changes around: "git read-tree -u -m". Yes, it fails if
the target tree is different in the paths that are dirty in the working
tree, but this is how we used to switch branches in "git checkout", and it
worked fine.
However, perhaps exactly _because_ we've supported this from very early
on, another low-level command, namely "git reset", never did.
But as time went on, 'git reset' remains as a very common command, while
'git read-tree' is now a very odd and low-level plumbing thing that nobody
sane should ever use, because it only makes sense together with other
operations like either switching branches or just rewriting HEAD.
Which means that we have effectively lost the ability to do something very
common: jump to another point in time without always dropping all our
dirty state.
So add this kind of mode to "git reset", and since it merges your changes
to what you are resetting to, just call it that: "git reset --merge".
I've wanted this for a long time, since I very commonly carry a dirty
tree while working on things. My main 'Makefile' file quite often has the
next version already modified, and sometimes I have local modifications
that I don't want to commit, but I still do pulls and patch applications,
and occasionally want to do "git reset" to undo them - while still keeping
my local modifications.
(Maybe we could eventually change it to something like "if we have a
working tree, default to --merge, otherwise default to --mixed").
NOTE! This new mode is certainly not perfect. There's a few things to look
out for:
- if the index has unmerged entries, "--merge" will currently simply
refuse to reset ("you need to resolve your current index first").
You'll need to use "--hard" or similar in this case.
This is sad, because normally a unmerged index means that the working
tree file should have matched the source tree, so the correct action is
likely to make --merge reset such a path to the target (like --hard),
regardless of dirty state in-tree or in-index. But that's not how
read-tree has ever worked, so..
- "git checkout -m" actually knows how to do a three-way merge, rather
than refuse to update the working tree. So we do know how to do that,
and arguably that would be even nicer behavior.
At the same time it's also arguably true that there is a chance of loss
of state (ie you cannot get back to the original tree if the three-way
merge ends up resolving cleanly to no diff at all), so the "refuse to
do it" is in some respects the safer - but less user-friendly - option.
In other words, I think 'git reset --merge' could become a bit more
friendly, but this is already a big improvement. It allows you to undo a
recent commit without having to throw your current work away.
Yes, yes, with a dirty tree you could always do
git stash
git reset --hard
git stash apply
instead, but isn't "git reset --merge" a nice way to handle one particular
simple case?
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
--
Hmm? Maybe I'm the only one that does a lot of work with a dirty tree, and
sure, I can do other things like the "git stash" thing, or using "git
checkout" to actually create a new branch, and then playing games with
branch renaming etc to make it work like this one.
But I suspect others dislike how "git reset" works too. But see the
suggested improvements above.
builtin-reset.c | 26 ++++++++++++++++++--------
1 files changed, 18 insertions(+), 8 deletions(-)
This option lets git mergetool invoke the conflict resolution program
without waiting for a user prompt each time.
Also added a mergetool.prompt (default true) configuration variable
controlling the same behaviour
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-mergetool.sh mostly uses 8 space tabs and 4 spaces per indent. This
change corrects this in a part of the file affect by a later commit in
this patch series. diff -w considers this change is to be a null change.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-14 21:30:55 -08:00
423 changed files with 13575 additions and 3916 deletions
fprintf(stderr,"Note: moving to \"%s\" which isn't a local branch\nIf you want to create a new branch from this checkout, you may do so\n(now or later) by using -b with the checkout command again. Example:\n git checkout -b <new_branch_name>\n",new->name);
fprintf(stderr,"Note: moving to '%s' which isn't a local branch\nIf you want to create a new branch from this checkout, you may do so\n(now or later) by using -b with the checkout command again. Example:\n git checkout -b <new_branch_name>\n",new->name);
describe_detached_head("HEAD is now at",new->commit);
@ -21,9 +22,7 @@ static void count_objects(DIR *d, char *path, int len, int verbose,
constchar*cp;
intbad=0;
if((ent->d_name[0]=='.')&&
(ent->d_name[1]==0||
((ent->d_name[1]=='.')&&(ent->d_name[2]==0))))
if(is_dot_or_dotdot(ent->d_name))
continue;
for(cp=ent->d_name;*cp;cp++){
intch=*cp;
@ -61,7 +60,7 @@ static void count_objects(DIR *d, char *path, int len, int verbose,
hex[40]=0;
if(get_sha1_hex(hex,sha1))
die("internal error");
if(has_sha1_pack(sha1,NULL))
if(has_sha1_pack(sha1))
(*packed_loose)++;
}
}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
