GIT_DIFFTOOL_PROMPT doesn't have any effect if overridden with --prompt.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first argument of the tar command is interpreted as a bundle of
letters specifying the mode of operation and additional options, with
any option arguments taken from subsequent words on the command line
as needed. The implementation of tar in busybox treats this bundle
as if preceded by a dash and then parses it by getopt rules, which
mishandles 'tar xfo -'. Use 'tar xof -' instead to work this around.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a regression introduce by d68dc34 (git-describe: Die early if
there are no possible descriptions, 2009-08-06).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The loop in get_size_from_delta() feeds a deflated delta data from the
pack stream _until_ we get inflated result of 20 bytes[*] or we reach the
end of stream.
Side note. This magic number 20 does not have anything to do with the
size of the hash we use, but comes from 1a3b55c (reduce delta head
inflated size, 2006-10-18).
The loop reads like this:
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
curpos += stream.next_in - in;
} while ((st == Z_OK || st == Z_BUF_ERROR) &&
stream.total_out < sizeof(delta_head));
This git_inflate() can return:
- Z_STREAM_END, if use_pack() fed it enough input and the delta itself
was smaller than 20 bytes;
- Z_OK, when some progress has been made;
- Z_BUF_ERROR, if no progress is possible, because we either ran out of
input (due to corrupt pack), or we ran out of output before we saw the
end of the stream.
The fix b3118bd (sha1_file: Fix infinite loop when pack is corrupted,
2009-10-14) attempted was against a corruption that appears to be a valid
stream that produces a result larger than the output buffer, but we are
not even trying to read the stream to the end in this loop. If avail_out
becomes zero, total_out will be the same as sizeof(delta_head) so the loop
will terminate without the "fix". There is no fix from b3118bd needed for
this loop, in other words.
The loop in unpack_compressed_entry() is quite a different story. It
feeds a deflated stream (either delta or base) and allows the stream to
produce output up to what we expect but no more.
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
curpos += stream.next_in - in;
} while (st == Z_OK || st == Z_BUF_ERROR)
This _does_ risk falling into an endless interation, as we can exhaust
avail_out if the length we expect is smaller than what the stream wants to
produce (due to pack corruption). In such a case, avail_out will become
zero and inflate() will return Z_BUF_ERROR, while avail_in may (or may
not) be zero.
But this is not a right fix:
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
+ if (st == Z_BUF_ERROR && (stream.avail_in || !stream.avail_out)
+ break; /* wants more input??? */
curpos += stream.next_in - in;
} while (st == Z_OK || st == Z_BUF_ERROR)
as Z_BUF_ERROR from inflate() may be telling us that avail_in has also run
out before reading the end of stream marker. In such a case, both avail_in
and avail_out would be zero, and the loop should iterate to allow the end
of stream marker to be seen by inflate from the input stream.
The right fix for this loop is likely to be to increment the initial
avail_out by one (we allocate one extra byte to terminate it with NUL
anyway, so there is no risk to overrun the buffer), and break out if we
see that avail_out has become zero, in order to detect that the stream
wants to produce more than what we expect. After the loop, we have a
check that exactly tests this condition:
if ((st != Z_STREAM_END) || stream.total_out != size) {
free(buffer);
return NULL;
}
So here is a patch (without my previous botched attempts) to fix this
issue. The first hunk reverts the corresponding hunk from b3118bd, and
the second hunk is the same fix proposed earlier.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This enables gitk to show the patch text with correct glyphs if the locale
is not UTF-8.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mbox file must have been added by accident in e9fe804 (git-mailinfo:
Fix getting the subject from the in-body [PATCH] line, 2008-07-14).
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git push -h' shows usage text with incomplete list of options and then
has a separate list of options that are supported. Imitate the way other
commands (I looked at 'git diff' for an example) show their options.
Signed-off-by: しらいし ななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'make clean' should remove the object files from block-sha1/
instead of the non-existent mozilla-sha1/ directory.
Signed-off-by: Carlos R. Mafra <crmafra@aei.mpg.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" would segfault if its -f option was used because it would
try to use an uninitialized strbuf, so initialize the strbuf.
Thanks to Johannes Sixt <j.sixt@viscovery.net> for the help with the
test cases.
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some types of corruption to a pack may confuse the deflate stream
which stores an object. In Andy's reported case a 36 byte region
of the pack was overwritten, leading to what appeared to be a valid
deflate stream that was trying to produce a result larger than our
allocated output buffer could accept.
Z_BUF_ERROR is returned from inflate() if either the input buffer
needs more input bytes, or the output buffer has run out of space.
Previously we only considered the former case, as it meant we needed
to move the stream's input buffer to the next window in the pack.
We now abort the loop if inflate() returns Z_BUF_ERROR without
consuming the entire input buffer it was given, or has filled
the entire output buffer but has not yet returned Z_STREAM_END.
Either state is a clear indicator that this loop is not working
as expected, and should not continue.
This problem cannot occur with loose objects as we open the entire
loose object as a single buffer and treat Z_BUF_ERROR as an error.
Reported-by: Andy Isaacson <adi@hexapodia.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch to MiB/s when the connection is fast enough (i.e. on a LAN).
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we use -b <branch>, we may checkout something else than what the
remote's HEAD references, but we still used remote_head to supply the
new ref value to the post-checkout hook, which is wrong.
So instead of using remote_head to find the value to be passed to the
post-checkout hook, we have to use our_head_points_at, which is always
correctly setup, even if -b is not used.
This also fixes a segfault when "clone -b <branch>" is used with a
remote repo that doesn't have a valid HEAD, as in such a case
remote_head is NULL, but we still tried to access it.
Reported-by: Devin Cofer <ranguvar@archlinux.us>
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All programs, in particular also the stand-alone programs (non-builtins)
must call git_extract_argv0_path(argv[0]) in order to help builds that
derive the installation prefix at runtime, such as the MinGW build.
Without this call, the program segfaults (or raises an assertion
failure).
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Tested-by: Michael Wookey <michaelwookey@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unless one already knew, it was not obvious what sort of shorthand
"git check-ref-format --branch" expands. Explain it.
The --branch argument is not optional.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In all parts of git, .gitignore and other exclude files
impact only how we treat untracked files; they should have
no effect on files listed in the index.
This behavior was originally implemented very early on in
9ff768e, but only for --exclude-from. Later, commit 63d285c
accidentally caused us to trigger the behavior for
--exclude-per-directory.
This patch totally ignores excludes for files found in the
index. This means we are reversing the original intent of
9ff768e, while at the same time fixing the accidental
behavior of 63d285c. This is a good thing, though, as the
way that 9ff768e behaved does not really make sense with the
way exclusions are used in modern git.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make "git add -p" to not skip files that are in index even if they are
excluded (by .gitignore etc.). This fixes the contradictory behavior
that "git status" and "git commit -a" listed such files as modified, but
"git add -p FILENAME" ignored them.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When saying the initial branch is equal to the currently active
remote branch, it is probably intended that the branch heads
point to the same commit. Maybe it would be more useful to a
new user to emphasize that the tree contents and history are the
same.
More important, probably, is that this new branch is set up so
that "git pull" merges changes from the corresponding remote
branch. The next paragraph addresses that directly. What the
reader needs to know to begin with is that (1) the initial branch
is your own; if you do not pull, it won't get updated, and that
(2) the initial branch starts out at the same commit as the
upstream.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some MTAs reject Cc: lines longer than 78 chars.
Avoid this by using the same join as "To:" ",\n\t"
so each subsequent Cc entry is on a new line.
RCPT TO: should have a single entry per line.
see: http://www.ietf.org/rfc/rfc2821.txt
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aliases with newlines have been a problem since commit 56fc25f (Bash
completion support for remotes in .git/config., 2006-11-05). The chance
of the problem occurring has been slim at best, until commit 518ef8f
(completion: Replace config --list with --get-regexp, 2009-09-11)
removed the case statement introduced by commit 56fc25f. Before removing
the case statement, most aliases with newlines would work unless they
were specially crafted as follows
[alias]
foo = "log -1 --pretty='format:%s\nalias.error=broken'"
After removing the case statement, a more benign alias like
[alias]
whowhat = "log -1 --pretty='format:%an <%ae>\n%s'"
wont-complete = ...
would cause the completion to break badly.
For now, revert the removal of the case statement until someone comes up
with a better way to get keys from git-config.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After commit 511a3fc (wrap git's main usage string., 2009-09-12), the
bash completion for git commands includes COMMAND and [ARGS] when it
shouldn't. Fix this by grepping more strictly for a line with git
commands. It's doubtful whether git will ever have commands starting
with anything besides numbers and letters so this should be fine. At
least by being stricter we'll know when we break the completion earlier.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes an obvious syntax error that snuck in commit 7e787953:
syntax error at /home/ingmar/bin//git-import-tars line 143, near "/^$/ { "
syntax error at /home/ingmar/bin//git-import-tars line 145, near "} else"
syntax error at /home/ingmar/bin//git-import-tars line 152, near "}"
Signed-off-by: Ingmar Vanhassel <ingmar@exherbo.org>
Acked-and-Tested-by: Peter Krefting <peter@softwolves.pp.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Idealists may want USE_NSEC to be the default on Linux some day.
Point to a patch to better explain the requirements on
filesystem code for that to happen.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not necessarily obvious to a git novice what it means for a
filesystem tree to be equal to the HEAD. Spell it out.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation seems to assume that the starting point for a new
branch is the tip of an existing (ordinary) branch, but that is not
the most common case. More often, "git branch" is used to begin
a branch from a remote-tracking branch, a tag, or an interesting
commit (e.g. origin/pu^2). Clarify the language so it can apply
to these cases. Thanks to Sean Estabrooks for the wording.
Also add a pointer to the user's manual for the bewildered.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the documentation for --merged and --no-merged to explain
the meaning of the optional parameter introduced in commit 049716b
(branch --merged/--no-merged: allow specifying arbitrary commit,
2008-07-08).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sounds better this way, at least to my ears. ("The syntax and
supported options of git merge" is a plural noun. "the same"
instead of "equal" sounds less technical and seems to convey
the meaning better here.)
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fmt-merge-message builtin can be invoked as "git fmt-merge-msg" rather
than through the hard link in GIT_EXEC_PATH. Although this is unlikely to
confuse most script writers, it should not hurt to make the documentation
a little clearer anyway.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is excellent documentation for these options in
Documentation/Makefile, but some users may never find it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several reasons a git-pull invocation might not
have anything marked for merge:
1. We're not on a branch, so there is no branch
configuration.
2. We're on a branch, but there is no configuration for
this branch.
3. We fetched from the configured remote, but the
configured branch to merge didn't get fetched (either
it doesn't exist, or wasn't part of the fetch refspec).
4. We fetched from the non-default remote, but didn't
specify a branch to merge. We can't use the configured
one because it applies to the default remote.
5. We fetched from a specified remote, and a refspec was
given, but it ended up not fetching anything (this is
actually hard to do; if the refspec points to a remote
branch and it doesn't exist, then fetch will fail and
we never make it to this code path. But if you provide
a wildcard refspec like
refs/bogus/*:refs/remotes/origin/*
then you can see this failure).
We have handled (1) and (2) for some time. Recently, commit
a6dbf88 added code to handle case (3).
This patch handles cases (4) and (5), which previously just
fell under other cases, producing a confusing message.
While we're at it, let's rewrap the text for case (3), which
looks terribly ugly as it is.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After doing a rebase, git-svn checks that the SVN URL
is what it expects. However, it does not account for
rewriteRoot, which is a legitimate way for the URL
to change. This produces a lot of spurious errors.
[ew: fixed line wrapping]
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
When git is compiled with the MIPSpro 7.4.4m compiler, and NO_PTHREADS is
set, and NO_MMAP is _not_ set, then git segfaults when trying to access the
first entry in a reflog. If NO_PTHREADS is not set (which implies that the
pthread library is linked in), or NO_MMAP _is_ set, then the segfault is
not encountered. The conservative choice has been made to set NO_MMAP in
the Makefile to avoid this flaw. The GNU C compiler does not produce this
behavior.
The segfault happens in refs.c:read_ref_at(). The mmap succeeds, and the
loop is executed properly until rec is rewound into the first line (reflog
entry) of the file. The segfault is caught by test 28 of
t1400-update-ref.sh which fails when 'git rev-parse --verify "master@{May 25
2005}"' is called.
So, add a comment in the Makefile to describe why NO_MMAP is set and as a
hint to those who may be interested in unsetting it.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When ls-files was called with -i but no exclude pattern, it was
calling fprintf(stderr, "...", NULL) and then exiting. On Solaris,
passing NULL into fprintf was causing a segfault. On glibc systems,
it was simply producing incorrect output (eg: "(null)": ...). The
NULL pointer was a result of argv[0] not being preserved by the option
parser. Instead of requesting that the option parser preserve
argv[0], use die() with a constant string.
A trigger for this bug was: `git ls-files -i`
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit dcda3614 removed the use of a variable length array from
builtin-pack-objects.c, it is now safe to compile with the threaded delta
search feature enabled. Formerly, the MIPSpro 7.4.4m compiler warned that
variable length arrays should not be used with pthreads.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During an MSVC build on cygwin, the make program did not notice
when the compiler or linker exited with an error. This was caused
by the scripts exiting with the value returned by system() directly.
On POSIX-like systems, such as cygwin, the return value of system()
has the exit code of the executed command encoded in the first byte
(ie the value is shifted up by 8 bits). This allows the bottom
7 bits to contain the signal number of a terminated process, while
the eighth bit indicates whether a core-dump was produced. (A value
of -1 indicates that the command failed to execute.)
The make program, however, expects the exit code to be encoded in the
bottom byte. Futhermore, it apparently masks off and ignores anything
in the upper bytes.
However, these scripts are (naturally) intended to be used on the
windows platform, where we can not assume POSIX-like semantics from
a perl implementation (eg ActiveState). So, in general, we can not
assume that shifting the return value right by eight will get us
the exit code.
In order to improve portability, we assume that a zero return from
system() indicates success, whereas anything else indicates failure.
Since we don't need to know the exact exit code from the compiler
or linker, we simply exit with 0 (success) or 1 (failure).
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the MSVC section of the Makefile, BASIC_CFLAGS is set to a
value which contains the string "-DWIN32-D_CONSOLE". This results
in a (single) malformed -Define being passed to the compiler.
At least on my cygwin installation, the msvc compiler seems to
ignore this parameter, without issuing an error or warning, and
results in the WIN32 and _CONSOLE macros being undefined. This
breaks the build.
In order to fix the build, we simply insert a space between the
two -Define parameters, "-DWIN32" and "-D_CONSOLE", as originally
intended.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --prefix=string that does not end with a slash, the top-level entries
are written out with the specified prefix as expected, but no paths in the
directories are added.
Fix this by adding the prefix in write_archive_entry() instead of letting
get_pathspec() and read_tree_recursive() pair; they are designed to only
handle prefixes that are path components.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git am learned --scissors, git commit learned --dry-run and git log
learned --decorate=long|short recently.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reading the "raw format" timestamp from the input stream, make sure
that the timezone offset is a reasonable value by imitating 7122f82
(date.c: improve guess between timezone offset and year., 2006-06-08).
We _might_ want to also check if the timestamp itself is reasonable, but
that is left for a separate commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back when a74b170 (git-pull: disallow implicit merging to detached HEAD,
2007-01-15) added this check, $? referred to the error status of reading
HEAD as a symbolic-ref; but cd67e4d (Teach 'git pull' about --rebase,
2007-11-28) moved the command away from where the check is, and nobody
noticed the breakage. Ever since, $? has always been 0 (tr at the end of
the pipe to find merge_head never fails) and other case arms were never
reached.
These days, error_on_no_merge_candidates function is prepared to handle a
detached HEAD case, which was what the code this patch removes used to
handle.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running "git show-branch" without any parameter in a repository that
has showbranch.default defined, we used to rely on the fact that our
handcrafted option parsing loop never looked at av[0].
The array of default strings had the first real command line argument in
default_arg[0], but the option parser wanted to look at the array starting
at av[1], so we assigned the address of -1th element to av to force the
loop start working from default_arg[0].
This no longer worked since 5734365 (show-branch: migrate to parse-options
API, 2009-05-21), as parse_options_start() saved the incoming &av[0] in
its ctx->out and later in parse_options_end() it did memmove to ctx->out
(with ctx->cpidx == 0), overwriting the memory before default_arg[] array.
I am not sure if this is a bug in parse_options(), or a bug in the caller,
and tonight I do not have enough concentration to figure out which. In
any case, this patch works the issue around.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes '--relative-date' so that it does not give '0
year, 12 months', for the interval 360 <= diff < 365.
Signed-off-by: Johan Sageryd <j416@1616.se>
Signed-off-by: Jeff King <peff@peff.net>
commit 51ea551 ("make sure byte swapping is optimal for git"
2009-08-18) introduced a "sane definition for ntohl()/htonl()"
for use on some GNU C platforms. Unfortunately, for some of
these platforms, this results in the introduction of a problem
which is essentially the reverse of a problem that commit 6e1c234
("Fix some warnings (on cygwin) to allow -Werror" 2008-07-3) was
intended to fix.
In particular, on platforms where the uint32_t type is defined
to be unsigned long, the return type of the new ntohl()/htonl()
is causing gcc to issue printf format warnings, such as:
warning: long unsigned int format, unsigned int arg (arg 3)
(nine such warnings, covering six different files). The earlier
commit (6e1c234) needed to suppress these same warnings, except
that the types were in the opposite direction; namely the format
specifier ("%u") was 'unsigned int' and the argument type (ie the
return type of ntohl()) was 'long unsigned int' (aka uint32_t).
In order to suppress these warnings, the earlier commit used the
(C99) PRIu32 format specifier, since the definition of this macro
is suitable for use with the uint32_t type on that platform.
This worked because the return type of the (original) platform
ntohl()/htonl() functions was uint32_t.
In order to suppress these warnings, we change the return type of
the new byte swapping functions in the compat/bswap.h header file
from 'unsigned int' to uint32_t.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Jeff King <peff@peff.net>
Some compilers (including at least MSVC and ARM RVDS) supports
NORETURN on function declarations, but not on function pointers.
This patch makes it possible to define NORETURN for these compilers,
by splitting the NORETURN macro into two - one for function
declarations and one for function pointers.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Some compilers (including at least MSVC) support NORETURN
on function declarations, but only before the function-name.
This patch makes it possible to define NORETURN to something
meaningful for those compilers.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
When we show a reflog, we have two ways of naming the entry:
by sequence number (e.g., HEAD@{0}) or by date (e.g.,
HEAD@{10 minutes ago}). There is no explicit option to set
one or the other, but we guess based on whether or not the
user has provided us with a date format, showing them the
date version if they have done so, and the sequence number
otherwise.
This usually made sense if the use did something like "git
log -g --date=relative". However, it didn't make much sense
if the user set the date format using the log.date config
variable; in that case, all of their reflogs would end up as
dates.
This patch records the source of the date format and only
triggers the date-based view if --date= was given on the
command line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A recent "cut at scissors" implementation rewinds and truncates
the output file to store the message when it sees a scissors mark,
but it did not check if these library calls succeeded.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[sp: Use fseek as rewind returns void]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The format of the generated MSVC solution file is fixed in a way that
just opening it in Visual Studio and immediately closing it again
without performing any modifications does not trigger a prompt to save
the solution file. This behavior was caused by several minor
incompatibilities between the generated file and what Visual Studio
2008 expected, so Visual Studio transparently fixed the file format,
marking it internally as modified.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Acked-by: Marius Storm-Olsen <mstormo@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In order to be able to open the generated solution file by double-
clicking it in Windows Explorer, all project files need to use DOS
line-endings and a comment about the Visual Studio version needs to
be added to the header of the solution file. This also fixes the icon
that is displayed for the solution file in Windows Explorer.
Note that opening the solution file from a running instance of Visual
Studio already worked before.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Acked-by: Marius Storm-Olsen <mstormo@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Defining UNICODE for MSVC IDE builds results in certain Win32 WIDE
API's receiving ANSI strings. The result of which is an invalid use
of the API and will end in either data corruption or an application
crash.
Prevent the use of WIDE API's when building with the MSVC IDE for
compatibility with msysGit.
Signed-off-by: Michael Wookey <michaelwookey@gmail.com>
Acked-by: Marius Storm-Olsen <mstormo@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The default --aggressive window has been 250 since 1c192f34 "gc
--aggressive: make it really aggressive", released in git v1.6.3.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Previously the old error message just told the user that it was not
possible to delete the ref from the packed-refs file. Give instructions
on how to resolve the problem.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
parse_long_opt always matches both --opt and --no-opt for any option
"opt", and only get_value checks whether --no-opt is actually valid.
Since the options for git branch contains both "no-merged" and "merged"
there are two matches for --no-merge, but no exact match. With this
patch the negation of a NONEG option is rejected earlier, but it changes
the error message from "option `no-opt' isn't available" to "unknown
option `no-opt'".
[jk: added test]
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Current behavior of 'git clone' when not using --mirror is to fetch
everything from the peer, and then filter out unwanted refs just before
writing them out to the cloned repository. This may become highly
inefficient if the peer has an unusual ref namespace, or if it simply
has "remotes" refs of its own, and those locally unwanted refs are
connecting to a large set of objects which becomes unreferenced as soon
as they are fetched.
Let's filter out those unwanted refs from the peer _before_ asking it
what refs we want to fetch instead, which is the most logical thing to
do anyway.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
According to egrep(1) the US-ASCII table is used when LC_ALL=C is set.
We do not rely here on the LC_ALL value we get from the environment.
Signed-off-by: Christian Himpel <chressie@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
RFC2822 specifies in paragraph 3.6.8, that optional header fields are
made up of any printable US-ASCII character except ' ' (space) and ':'
(colon).
The pattern for the egrep command is changed to match all of these
characters.
Signed-off-by: Christian Himpel <chressie@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When encryption=tls and we cannot connect to the SMTP server,
git-send-email was printing an obtuse perl error:
Can't call method "command" on an undefined value
at git-send-email line 927.
This can occur when smtp host or port is misspelled, or the network
is down, and encryption has been set to tls.
Instead we expect some familiar "Cannot connect to SERVER:PORT"
message. Fix it to print normal "smtp can't connect" diagnostics.
Signed-off-by: Yakov Lerner <iler.ml@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
It appears that ExtUtils::MakeMaker versions older than 6.11 do not
implement the DESTDIR mechanism. So add a test to the generated perl.mak
to detect when DESTDIR is used along with a too old ExtUtils::MakeMaker and
abort with a message suggesting the use of NO_PERL_MAKEMAKER.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When the remote branch we asked for merging did not exist in the set of
fetched refs, we unconditionally hinted that it was because of lack of
configuration. It is not necessarily so, and risks sending users for a
wild goose chase.
Make sure to check if that is indeed the case before telling a wild guess
to the user.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A sample "git describe -h" did not match what the program actually says.
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This update adds 'git stash (apply|pop) --quiet' and all options known
to 'git stash save', and handles the DWIMery from 3c2eb80f (stash:
simplify defaulting to "save" and reject unknown options, 2009-08-18).
Care is taken to avoid offering subcommands in the DWIM case.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_find_subcommand() was originally meant to check whether
subcommands are already present on the command line. But the code is
general enough to be used for checking the presence of command line
options as well, and the next commit will use it for that purpose, so
let's give it a more general name.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Building with prefix=/some/where and temporarily installing it to
elsewhere for tar'ing up is done with:
make prefix=/some/where
make prefix=/some/where DESTDIR=/else/where install
Make handcrafted perl/perl.mak without NO_PERL_MAKEMAKER honour DESTDIR.
Ancient ExtUtils::MakeMaker (pre 6.11?) has the same issue, but recent
versions of Perl ships with at leat 6.17; this patch does not address that
issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a comment explaining why square brackets around a tr range
are not only ok, but actually required in this case.
Correct spelling and grammar.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a6ca8c62 (Set _O_BINARY as default fmode for both MinGW and MSVC)
removed the definition of _CRT_fmode from mingw.c. Before this commit,
since test-genrandom is linked against libgit.a, the MinGW process
initialization code would pick up that definition of _CRT_fmode, which was
initialized to _O_BINARY. After this commit, however, text mode is used
for std(in|out|err) because it is the default in absence of _CRT_fmode.
In order to fix that, we must use git-compat-util.h, which overrides
main() to set the mode to binary.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Work around leftover temporary save file
gitk: Show diff of commits at end of compare-commits output
gitk: Update Swedish translation (280t0f0u)
If a file exists and is hidden on Windows the Tcl open command will
fail as the attributes provided in the CREAT call fail to match those
of the existing file. Forcing removal of the temporary file before we
begin solves any problems caused by previous failures to save the
application settings. An alternative would be to remove the hidden
attribute before calling 'open'.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The variable is assigned unconditionally in print_push_status, but
print_push_status is not reached by all codepaths. In particular, this
fixes a bug where "git push ... nonexisting-branch" was complaining about
non-fast forward.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This may help us debug issues on Windows, as we now can build Git
natively on Windows with both MinGW and MSVC.
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These scripts generate projects for the MSVC IDE (.vcproj files) or
QMake (.pro files), based on the output of a 'make -n MSVC=1 V=1' run.
This enables us to simply do the necesarry changes in the Makefile, and you
can update the other buildsystems by regenerating the files. Keeping the
other buildsystems up-to-date with main development.
The generator system is designed to easily drop in pm's for other
buildsystems as well, if someone has an itch. However, the focus has been
Windows development, so the 'engine' might need patches to support any
platform.
Also add some .gitignore entries for MSVC files.
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Based on original README patch from Frank Li, describe the steps
to build git with VS2008 (aka MSVC).
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable MSVC builds with GNU Make by simply calling
make MSVC=1
(Debug build possible by adding DEBUG=1 as well)
Two scripts, clink.pl and lib.pl, are used to convert certain GCC
specific command line options into something MSVC understands.
By building for MSVC with GNU Make, we can ensure that the MSVC
port always follows the latest code, and does not lag behind due
to unmaintained NMake Makefile or IDE projects.
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Centralize the include of windows.h in git-compat-util.h, turn on
WIN32_LEAN_AND_MEAN to avoid including plenty of other header files
which is not needed in Git. Also ensure we load winsock2.h first,
so we don't load the older winsock definitions at a later stage,
since they contain duplicate definitions.
When moving windows.h into git-compat-util.h, we need to protect
the definition of struct pollfd in mingw.h, since this file is used
by both MinGW and MSVC, and the latter defines this struct in
winsock2.h.
We need to keep the windows.h include in compat/win32.h, since its
shared by both MinGW and Cygwin, and we're not touching Cygwin in
this commit. The include in git-compat-util.h is protected with an
ifdef WIN32, which is not the case when compiling for Cygwin.
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Added the header files dirent.h, unistd.h and utime.h
Add alloca.h, which simply includes malloc.h, which defines alloca().
Signed-off-by: Frank Li <lznuaa@gmail.com>
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MSVC lacks many of the header files included by git-compat-util.h; add
blank header files for these instead of going ifdef crazy.
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code which is conditional on MinGW32 is actually conditional on Windows.
Use the WIN32 symbol, which is defined by the MINGW32 and MSVC environments,
but not by Cygwin.
Define SNPRINTF_SIZE_CORR=1 for MSVC too, as its vsnprintf function does
not add NUL at the end of the buffer if the result fits the buffer size
exactly.
Signed-off-by: Frank Li <lznuaa@gmail.com>
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MSVC requires __stdcall to be between the functions return value and the
function name, and that the function pointer type is in the form of
return_type (WINAPI *function_name)(arguments...)
Signed-off-by: Frank Li <lznuaa@gmail.com>
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MinGW set the _CRT_fmode to set both the default fmode and _O_BINARY on
stdin/stdout/stderr. Rather use the main() define in mingw.h to set this
for both MinGW and MSVC.
This will ensure that a MinGW and MSVC build will handle input and output
identically.
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The MSVC headers typedef errcode as int, and thus confused the compiler in
the K&R style definition. ANSI style deconfuses it.
Signed-off-by: Frank Li <lznuaa@gmail.com>
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These spaces immediately before the end of lines are unnecessary.
While at it, instead of using a single string literal with backslashes
at end of each line, split the lines into individual string literals
and tell the compiler to concatenate them.
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git bundle -h" gives a single long line that is hard to read. Rewrite it
into a multi-line format similar to the one used by other commands, e.g
"git stash -h".
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we do not read a password from the command line, and there are no
passwords stored in .cvspass, we have to initialize the password with
just "A".
This fixes a regression introduced by 3fb9d582 (Do not scramble
password read from .cvspass).
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tf/diff-whitespace-incomplete-line:
xutils: Fix xdl_recmatch() on incomplete lines
xutils: Fix hashing an incomplete line with whitespaces at the end
An earlier 59b8d38 (http.c: remove verification of remote packs) left
the variable "url" uninitialized; "goto cleanup" codepath can free it
which is not very nice.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since OS X 10.6 the variable $SECURITYSESSIONID does not exist anymore,
so lets look for the $TERM_PROGRAM variable as backup.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A command line
$ git archive -o my-v2.0.zip v2.0
almost certainly wants the output in zip format, even though it does not
specify any --format option.
When --format is not given, but output filename is, try to infer what
format is requested from the filename extension. Currently this code only
knows about '.zip'. When the format is unspecified and the filename does
not tell us, the output will be in 'tar' format as before.
Of course, an explicit --format will not trigger this guesswork.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
James Bardin noted that the completion spewed warnings when no git config
file is present. This is likely a bug to be fixed in git config, but it's
also good to simplify the completion code by using the --get-regexp option
as Jeff King pointed out.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Trivially-acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '-o' option is commonly used in many tools to specify the output file.
Typing '--output' every time is a bit too long to be a practical alternative
to redirecting output. But specifying the output name has the advantage of
making possible to guess the desired output format by filename extension.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test the effect of an earlier change by f7835a2 (preserve mtime of local
clone, 2009-09-12) to keep stale loose object files stale in the new
repository when a local clone is made by copying files in .git/
directory.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-push is not currently using -n for anything else, and it seems
unlikely we will want to use it to mean anything else in the future,
so add it as an alias for convenience.
Signed-off-by: Nelson Elhage <nelhage@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
60c2993 (Documentation/git-commit.txt: describe --dry-run, 2009-08-15)
wanted to update the documentation to say that "git status" is not the
same as "git commit --dry-run" anymore, but it screwed up and also added
the description of --dry-run that was already present.
Noticed by Johannes Gilger.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A local clone without hardlinks copies all objects, including dangling
ones, to the new repository. Since the mtimes are renewed, those
dangling objects cannot be pruned by "git gc --prune", even if they
would have been old enough for pruning in the original repository.
Instead, preserve mtime during copy. "git gc --prune" will then work
in the clone just like it did in the original.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were several unchecked use of fdopen(); replace them with xfdopen()
that checks and dies.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the same fix to use write_str_in_full() helper to write a constant
string out without counting the length of it ourselves.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/vcs-helper:
Makefile: remove remnant of separate http/https/ftp helpers
Use a clearer style to issue commands to remote helpers
Make the "traditionally-supported" URLs a special case
Makefile: install hardlinks for git-remote-<scheme> supported by libcurl if possible
Makefile: do not link three copies of git-remote-* programs
Makefile: git-http-fetch does not need expat
http-fetch: Fix Makefile dependancies
Add transport native helper executables to .gitignore
git-http-fetch: not a builtin
Use an external program to implement fetching with curl
Add support for external programs for handling native fetches
In 2d14d65 (Use a clearer style to issue commands to remote helpers,
2009-09-03) I happened to notice two changes like this:
- write_in_full(helper->in, "list\n", 5);
+
+ strbuf_addstr(&buf, "list\n");
+ write_in_full(helper->in, buf.buf, buf.len);
+ strbuf_reset(&buf);
IMHO, it would be better to define a new function,
static inline ssize_t write_str_in_full(int fd, const char *str)
{
return write_in_full(fd, str, strlen(str));
}
and then use it like this:
- strbuf_addstr(&buf, "list\n");
- write_in_full(helper->in, buf.buf, buf.len);
- strbuf_reset(&buf);
+ write_str_in_full(helper->in, "list\n");
Thus not requiring the added allocation, and still avoiding
the maintenance risk of literal string lengths.
These days, compilers are good enough that strlen("literal")
imposes no run-time cost.
Transformed via this:
perl -pi -e \
's/write_in_full\((.*?), (".*?"), \d+\)/write_str_in_full($1, $2)/'\
$(git grep -l 'write_in_full.*"')
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's now similar wrapped the same way as in Documentation/git.txt, and
fits in a 67 characters wide terminal.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the call to authors-prog was not properly escaped, so any
special characters in the Subversion username, such as spaces and
semi-colons, would be interpreted by the shell rather than being passed
in as the first argument. Now all unsafe characters are escaped using
"git rev-parse --sq-quote"
[ew: switched from "\Q..\E" to "rev-parse --sq-quote"]
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/maint-1.6.3-grep-relative-up:
grep: accept relative paths outside current working directory
grep: fix exit status if external_grep() punts
Conflicts:
t/t7002-grep.sh
Commit 4cfbe06 introduced the use of "git diff" to show
dirty state in a format more familiar to users. However, it
should have used the plumbing "git diff-files" instead.
Not only is it good practice in general to use plumbing in
scripts, but in this case we really don't want the automatic
pager to kick in for an error message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These messages are nice for new users, but experienced git
users know how to manipulate the index, and these messages
waste a lot of screen real estate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This message is designed to help new users understand what
has happened when refs fail to push. However, it does not
help experienced users at all, and significantly clutters
the output, frequently dwarfing the regular status table and
making it harder to see.
This patch introduces a general configuration mechanism for
optional messages, with this push message as the first
example.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, this environment variable was set in the pager_preexec
callback, which is conditionally-compiled only on Unix, because it is not,
and cannot be, called on Windows.
With this patch the env member of struct child_process is used to set
the environment variable, which also works on Windows.
Noticed by Alexey Borzenkov.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, it would not be possible to call start_command twice for the
same struct child_process that has env set.
The fix is achieved by moving the loop that modifies the environment block
into a helper function. This also allows us to make two other helper
functions static.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make http.c::fetch_pack_index() no longer check for the remote pack
with a HEAD request before fetching the corresponding pack index file.
Not only does sending a HEAD request before we do a GET incur a
performance penalty, it does not offer any significant error-
prevention advantages (pack fetching in the *_http_pack_request()
methods is capable of handling any errors on its own).
This addresses an issue raised elsewhere:
http://code.google.com/p/msysgit/issues/detail?id=323http://support.github.com/discussions/repos/957-cant-clone-over-http-or-git
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We said that some of our dependencies were optional, but didn't say
how to turn them off. Add information for that and mention where to
save the options close to the top of the file.
Also, standardize on both using quotes for the names of the dependencies
and tabs for indentation of the list.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The most important and non-optional dependencies should go first, so put
them there. While we're moving them, the descriptions for shell and perl
were archaic, referring to "bare-bones Porcelainish scripts" that have
become powerful and essential.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The popen2, sha and sets modules are deprecated in Python 2.6 (sha in
Python 2.5). Both popen2 and sha are not actually used in git-p4.
Replace usage of sets.Set with the builtin set object.
The built-in set object was added in Python 2.4 and is already used in
other parts of this script, so this dependency is nothing new.
Signed-off-by: Reilly Grant <reillyeon@qotw.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Makefile comment for NEEDS_SSL_WITH_CRYPTO says to define it "if
you need -lcrypto with -lssl (Darwin)." However, what it actually
does is add -lssl when you use -lcrypto and not the other way around.
However, libcrypto contains a majority of the ERR_* functions from
OpenSSL (at least on OS X) so we need it both ways.
So, add NEEDS_CRYPTO_WITH_SSL which adds -lcrypto to the OpenSSL link
flags and clarify the difference between it and NEEDS_SSL_WITH_CRYPTO.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When comparing a string of commits, when we find two non-merge commits
that differ, we now write the two commits to files and diff the files.
This pulls out the logic for creating a temporary directory from
external_diff into a separate procedure so that the new diffcommits
procedure can use it.
Because the diff command returns an exit status of 1 when the files
differ, and Tcl treats that as an error, this adds catch {} around the
close statements in getblobdiffline.
At present this only removes the temporary files when gitk exits. It
should remove them when the diff is done.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Use `git-add-file' to mark unmerged files as resolved in the
*git-status* buffer to be consistent with git's CLI instructions. Also
remove `git-resolve-file' to make it clear that that "R" is a now a
free keybinding.
Signed-off-by: Martin Nordholts <martinn@src.gnome.org>
Acked-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We haven't had Mozilla's code or an ARM optimized algorithm since
30ae47b. Reword the paragraph to give credit but not authorship to
Mozilla.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When unpack_trees() three-way merge logic is called from merge-recursive
and finds that local changes are going to be clobbered, its plumbing level
messages were given as errors first, and then the merge driver added even
more scary message "fatal: merging of trees <a long object name> and
<another long object name> failed".
This is most often encountered by new CVS/SVN migrants who are used to
start a merge from a dirty work tree. The saddest part is that the merge
refused to run to prevent _any_ damage from being done to your work tree
when these messages are given, but the messages look a lot more scarier
than the conflicted case where the user needs to resolve them.
Replace the plumbing level messages so that they talk about what it is
protecting the user from, and end the messages with "Aborting." so that it
becomes clear that the command did not do any harm.
The final "merging of trees failed" message is superfluous, unless you are
interested in debugging the merge-recursive itself. Squelch the current
die() message by default, but allow it to help people who debug git with
verbosity level 4 or greater.
Unless there is some bug, an inner merge that does not touch working tree
should not trigger any such error, so emit the current die() message when
we see an error return from it while running the inner merge, too. It
would also help people who debug git.
We could later add instructions on how to recover (i.e. "stash changes
away or commit on a side branch and retry") instead of the silent
exit(128) I have in this patch, and then use Peff's advice.* mechanism to
squelch it (e.g. "advice.mergeindirtytree"), but they are separate topics.
Tested-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This configuration option allows systematically rewriting fetch-only URLs
to push-capable URLs when used with push. For instance:
[url "ssh://example.org/"]
pushInsteadOf = "git://example.org/"
This will allow clones of "git://example.org/path/to/repo" to subsequently
push to "ssh://example.org/path/to/repo", without manually configuring
pushurl for that remote.
Includes documentation for the new option, bash completion updates, and
test cases (both that pushInsteadOf applies to push, that it does not
apply to fetch, and that it is ignored when pushURL is already defined).
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-pull.txt includes fetch-options.txt and merge-options.txt, both of
which document the --quiet and --verbose.
Supress the ones from fetch-options.txt.
Signed-off-by: Emmanuel Trillaud <etrillaud@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All hooks are currently in its own section. Which may confuse users,
because the section name serves as the hook file name and sections are
all caps for man pages. Putting them into a new HOOKS section and each
hook into a subsection keeps the case to lower case.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/mailinfo-scissors:
mailinfo.scissors: new configuration
am/mailinfo: Disable scissors processing by default
Documentation: describe the scissors mark support of "git am"
Teach mailinfo to ignore everything before -- >8 -- mark
builtin-mailinfo.c: fix confusing internal API to mailinfo()
* tr/reset-checkout-patch:
stash: simplify defaulting to "save" and reject unknown options
Make test case number unique
tests: disable interactive hunk selection tests if perl is not available
DWIM 'git stash save -p' for 'git stash -p'
Implement 'git stash save --patch'
Implement 'git checkout --patch'
Implement 'git reset --patch'
builtin-add: refactor the meat of interactive_add()
Add a small patch-mode testing library
git-apply--interactive: Refactor patch mode code
Make 'git stash -k' a short form for 'git stash save --keep-index'
"git grep" would barf at relative paths pointing outside the current
working directory (or subdirectories thereof). Use quote_path_relative(),
which can handle such cases just fine.
[jc: added tests.]
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If external_grep() is called and punts, grep_cache() mistakenly reported a
hit, even if there were none. The bug can be triggered by calling "git
grep --no-color" from a subdirectory.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
remote.c has a global set of URL rewrites, accessed by alias_url and
make_rewrite. Wrap them in a new "struct rewrites", passed to alias_url
and make_rewrite. This allows adding other sets of rewrites.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The extreme raggedness of the right edge make this jarring
to read. Let's re-flow the text to fill the lines in a more
even way.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We must use an article when referring to the section
because it is a non-proper noun, and it must be the definite
article because we are referring to a specific section.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Passwords stored in .cvspass are already scrambled, we do not
want to scramble them twice. Only passwords read from the
command line are scrambled.
This fixes a regression introduced by b2139db (git-cvsimport: add support
for cvs pserver password scrambling., 2009-08-14).
Signed-off-by: Pascal Obry <pascal@obry.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When adding objects for preferred delta base, the content from tree
objects leading to given paths is kept in a cache. This has the
potential to grow significantly, especially with large directories as
the whole tree object content is loaded in memory, even if in practice
the number of those objects is limited to the 256 cache entries plus the
$window root tree objects. Still, that can't hurt freeing that up after
object enumeration is done, and before more memory is needed for delta
search.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
First of all, I can't find any reason why thin pack generation is
explicitly disabled when dealing with a shallow repository. The
possible delta base objects are collected from the edge commits which
are always obtained through history walking with the same shallow refs
as the client, Therefore the client is always going to have those base
objects available. So let's remove that restriction.
Then we can make shallow repository deepening much more efficient by
using the remote's unshallowed commits as edge commits to get preferred
base objects for thin pack generation. On git.git, this makes the data
transfer for the deepening of a shallow repository from depth 1 to depth 2
around 134 KB instead of 3.68 MB.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This style is overkill for some commands, but it's worthwhile to use
the same style to issue all commands, and it's useful to avoid
open-coding string lengths.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of trying to make http://, https://, and ftp:// URLs
indicative of some sort of pattern of transport helper usage, make
them a special case which runs the "curl" helper, and leave the
mechanism by which arbitrary helpers will be chosen entirely to future
work.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows the user to import version history that is stored in bits and
pieces in the file system, for instance snapshots of old development
trees, or day-by-day backups. A configuration file is used to
describe the relationship between the different files and allow
describing branches and merges, as well as authorship and commit
messages.
Output is created in a format compatible with git-fast-import.
Full documentation is provided inline in perldoc format.
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the "--metainfo=<ext>" option is given on the command line, a file
called "<filename.tar>.<ext>" will be used to create the commit message
for "<filename.tar>", instead of using "Imported from filename.tar".
The author and committer of the tar ball can also be overridden by
embedding an "Author:" or "Committer:" header in the metainfo file.
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.3:
git-clone: add missing comma in --reference documentation
git-cvsserver: no longer use deprecated 'git-subcommand' commands
clone: disconnect transport after fetching
This should have been part of 481c7a6, whose goal was to
make "git push -q" silent unless there is an error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-cvsserver still references git commands like 'git-config', which
is depcrecated. This commit changes git-cvsserver to use the
'git subcommand' form.
Sylvain Beucler reported the problem through
http://bugs.debian.org/536067
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code just leaves the transport in whatever state
it was in after performing the fetch. For a non-empty clone
over the git protocol, the transport code already
disconnects at the end of the fetch.
But for an empty clone, we leave the connection hanging, and
eventually close the socket when clone exits. This causes
the remote upload-pack to complain "the remote end hung up
unexpectedly". While this message is harmless to the clone
itself, it is unnecessarily scary for a user to see and may
pollute git-daemon logs.
This patch just explicitly calls disconnect after we are
done with the remote end, which sends a flush packet to
upload-pack and cleanly disconnects, avoiding the error
message.
Other transports are unaffected or slightly improved:
- for a non-empty repo over the git protocol, the second
disconnect is a no-op (since we are no longer connected)
- for "walker" transports (like HTTP or FTP), we actually
free some used memory (which previously just sat until
the clone process exits)
- for "rsync", disconnect is always a no-op anyway
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When resolving a conflicted merge, two lists in the status output need
more attention from the user than other parts.
- the list of updated paths is useful to review the amount of changes the
merge brings in (the user cannot do much about them other than
reviewing, though); and
- the list of unmerged paths needs the most attention from the user; the
user needs to resolve them in order to proceed.
Since the output of git status does not by default go through the pager,
the early parts of the output can scroll away at the top. It is better to
put the more important information near the bottom. During a merge, local
changes that are not in the index are minimum, and you should keep the
untracked list small in any case, so moving the unmerged list from the top
of the output to immediately after the list of updated paths would give us
the optimum layout.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the earlier DWIM patches, certain combination of options defaulted
to the "save" command correctly while certain equally valid combination
did not. For example, "git stash -k" were Ok but "git stash -q -k" did
not work.
This makes the logic of defaulting to "save" much simpler. If there are no
non-flag arguments, it is clear that there is no command word, and we
default to "save" subcommand. This rule prevents "git stash -q apply"
from quietly creating a stash with "apply" as the message.
This also teaches "git stash save" to reject an unknown option. This is
to keep a mistyped "git stash save --quite" from creating a stash with a
message "--quite", and this safety is more important with the new logic
to default to "save" with any option-looking argument without an explicit
comand word.
[jc: this is based on Matthieu's 3-patch series, and a follow-up
discussion, and he and Peff take all the credit; if I have introduced bugs
while reworking, they are mine.]
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of allocating a temporary array imglen[], copying contents to it
from another array img->line[], and then using imglen[], use the value
from img->line[], whose value does not change during the whole process.
This incidentally removes a use of C99 variable length array, which some
older compilers apparently are not happy with.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one of only two places that we use C99 variable length array on
the stack, which some older compilers apparently are not happy with.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The majority of code in core git appears to use a single
space after if/for/while. This is an attempt to bring more
code to this standard. These are entirely cosmetic changes.
Signed-off-by: Brian Gianforcaro <b.gianfo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/approxidate:
fix approxidate parsing of relative months and years
tests: add date printing and parsing tests
refactor test-date interface
Add date formatting and parsing functions relative to a given time
Further 'approxidate' improvements
Improve on 'approxidate'
Conflicts:
date.c
* mr/gitweb-snapshot:
gitweb: add t9501 tests for checking HTTP status codes
gitweb: split test suite into library and tests
gitweb: improve snapshot error handling
* tf/diff-whitespace-incomplete-line:
xutils: Fix xdl_recmatch() on incomplete lines
xutils: Fix hashing an incomplete line with whitespaces at the end
These were broken by b5373e9. The problem is that the code
marks the month and year with "-1" for "we don't know it
yet", but the month and year code paths were not adjusted to
fill in the current time before doing their calculations
(whereas other units follow a different code path and are
fine).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now, there was no coverage of relative date printing
or approxidate parsing routines (mainly because we had no
way of faking the "now" time for relative date calculations,
which made consistent testing impossible).
This new script tries to exercise the basic features of
show_date and approxidate. Most of the tests are just "this
obvious thing works" to prevent future regressions, with a
few exceptions:
- We confirm the fix in 607a9e8 that relative year/month
dates in the latter half of a year round correctly.
- We confirm that the improvements in b5373e9 and 1bddb25
work.
- A few tests are marked to expect failure, which are
regressions recently introduced by the two commits
above.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test-date program goes back to the early days of git,
where it was presumably used to do manual sanity checks on
changes to the date code. However, it is not actually used
by the test suite to do any sort of automatic of systematic
tests.
This patch refactors the interface to the program to try to
make it more suitable for use by the test suite. There
should be no fallouts to changing the interface since it is
not actually installed and is not internally called by any
other programs.
The changes are:
- add a "mode" parameter so the caller can specify which
operation to test
- add a mode to test relative date output from show_date
- allow faking a fixed time via the TEST_DATE_NOW
environment variable, which allows consistent automated
testing
- drop the use of ctime for showing dates in favor of our
internal iso8601 printing routines. The ctime output is
somewhat redundant (because of the day-of-week) which
makes writing test cases more annoying.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main purpose is to allow predictable testing of the code.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git branch, checkout, clean, mv and tag all have an option -f to override
certain checks. This patch makes them accept the long option --force as
a synonym.
While we're at it, document that checkout support --quiet as synonym for
its short option -q.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert git update-server-info to a built-in command and use parseopt.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This file is no longer used since 54bc13c (t8005: Nobody writes Russian in
shift_jis, 2009-06-18).
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A request to clone the repository does not give any "have" but asks for
all the refs we offer with "want". When a request does not ask to clone
the repository fully, but asks to fetch some refs into an empty
repository, it will not give any "have" but its "want" won't ask for all
the refs we offer.
If we suppose (and I would say this is a rather big if) that it makes
sense to distinguish these two cases, a hook cannot reliably do this
alone. The hook can detect lack of "have" and bunch of "want", but there
is no direct way to tell if the other end asked for all refs we offered,
or merely most of them.
Between the time we talked with the other end and the time the hook got
called, we may have acquired more refs or lost some refs in the repository
by concurrent operations. Given that we plan to introduce selective
advertisement of refs with a protocol extension, it would become even more
difficult for hooks to guess between these two cases.
This adds "kind [clone|fetch]" to hook's input, as a stable interface to
allow the hooks to tell these cases apart.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After upload-pack successfully finishes its operation, post-upload-pack
hook can be called for logging purposes.
The hook is passed various pieces of information, one per line, from its
standard input. Currently the following items can be fed to the hook, but
more types of information may be added in the future:
want SHA-1::
40-byte hexadecimal object name the client asked to include in the
resulting pack. Can occur one or more times in the input.
have SHA-1::
40-byte hexadecimal object name the client asked to exclude from
the resulting pack, claiming to have them already. Can occur zero
or more times in the input.
time float::
Number of seconds spent for creating the packfile.
size decimal::
Size of the resulting packfile in bytes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/shortstatus:
git commit --dry-run -v: show diff in color when asked
Documentation/git-commit.txt: describe --dry-run
wt-status: collect untracked files in a separate "collect" phase
Make git_status_config() file scope static to builtin-commit.c
wt-status: move wt_status_colors[] into wt_status structure
wt-status: move many global settings to wt_status structure
commit: --dry-run
status: show worktree status of conflicted paths separately
wt-status.c: rework the way changes to the index and work tree are summarized
diff-index: keep the original index intact
diff-index: report unmerged new entries
Set the members callback_func and callback_data of freq->slot to NULL
when releasing a http_object_request. release_active_slot() is also
invoked on the slot to remove the curl handle associated with the slot
from the multi stack (CURLM *curlm in http.c).
These prevent the callback function and data from being used in http
methods (like http.c::finish_active_slot()) after a
http_object_request has been free'd.
Noticed by Ali Polatel, who later tested this patch to verify that it
fixes the problem he saw; Dscho helped to identify the problem spot.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms (IRIX 6.5, Solaris 7) do not provide the 'yes' utility.
Currently, some tests, including t7610 and t9001, try to call this program.
Due to the way the tests are structured, the tests still pass even though
this program is missing. Rather than succeeding by chance, let's provide
an implementation of the simple 'yes' utility in shell for all platforms to
use.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Fix overridable written with an extra 'e'
Documentation: git-archive: mark --format as optional in summary
Round-down years in "years+months" relative date view
* maint-1.6.3:
Fix overridable written with an extra 'e'
Documentation: git-archive: mark --format as optional in summary
Round-down years in "years+months" relative date view
* maint-1.6.2:
Fix overridable written with an extra 'e'
Documentation: git-archive: mark --format as optional in summary
Round-down years in "years+months" relative date view
Conflicts:
Documentation/git-archive.txt
The --format option was made optional in 8ff21b1 (git-archive: make
tar the default format, 2007-04-09), but it was not marked as optional
in the summary. This trival patch just changes the summary to match
the rest of the documentation.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, a commit from 1 year and 7 months ago would display as
"2 years, 7 months ago".
Signed-off-by: David Reiss <dreiss@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adds a new test file, t9501, that checks HTTP status codes and messages
from gitweb.
Currently, the only tests are for the snapshot feature.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To accommodate additions to the test cases for gitweb, the preamble
from t9500 is now in its own library so that new sets of tests for
gitweb can use the same setup without copying the code.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/block-sha1:
remove ARM and Mozilla SHA1 implementations
block-sha1: guard gcc extensions with __GNUC__
make sure byte swapping is optimal for git
block-sha1: make the size member first in the context struct
* jh/submodule-foreach:
git clone: Add --recursive to automatically checkout (nested) submodules
t7407: Use 'rev-parse --short' rather than bash's substring expansion notation
git submodule status: Add --recursive to recurse into nested submodules
git submodule update: Introduce --recursive to update nested submodules
git submodule foreach: Add --recursive to recurse into nested submodules
git submodule foreach: test access to submodule name as '$name'
Add selftest for 'git submodule foreach'
git submodule: Cleanup usage string and add option parsing to cmd_foreach()
git submodule foreach: Provide access to submodule name, as '$name'
Conflicts:
Documentation/git-submodule.txt
git-submodule.sh
The variable named 'n' was initially declared to be of type int. The name
'n' was reused inside inner blocks as a different type. Rename the uses
within inner blocks to avoid confusion and give them a slightly more
descriptive name.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'len' variable was declared at the beginning of the make_absolute_path
function and also in an inner 'if' block which masked the outer declaration.
It is only used in two 'if' blocks, so remove the outer declaration and
make a new declaration inside the other 'if' block that uses 'len'.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is true that NEEDS_RESOLV is needed on SunOS if NO_IPV6 is set since
hstrerror() resides in libresolv, but performing this test at its current
location is not very useful. It will only have any effect if the user
modifies the make variables from the make command line, and will have no
effect if a config.mak file is used. A better location for this
conditional would have been further down in the Makefile after the
config.mak and config.mak.autogen had been parsed. Rather than adding
clutter to the Makefile for a conditional that will likely never be
triggered, just remove it, and any user on SunOS that manually sets NO_IPV6
can also set NEEDS_RESOLV.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe what a scissors mark looks like, and explain in what situation
it is often used.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches mailinfo the scissors -- >8 -- mark; the command ignores
everything before it in the message body.
For lefties among us, we also support -- 8< -- ;-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It fed two arguments to override the corresponding global variables,
but the caller always assigned the values to the global variables
first and then passed those global variables to this function.
Stop pretending to be a proper API to confuse people.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently point the HEAD of a newly cloned repo to the
same ref as the parent repo's HEAD. While a user can then
"git checkout -b foo origin/foo" whichever branch they
choose, it is more convenient and more efficient to tell
clone which branch you want in the first place.
Based on a patch by Kirill A. Korinskiy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-log: allow --decorate[=short|full]
Minor improvement to the write-tree documentation
git-bisect: call the found commit "*the* first bad commit"
Commit de435ac0 changed the behavior of --decorate from printing the
full ref (e.g., "refs/heads/master") to a shorter, more human-readable
version (e.g., just "master"). While this is nice for human readers,
external tools using the output from "git log" may prefer the full
version.
This patch introduces an extension to --decorate to allow the caller to
specify either the short or the full versions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jp/symlink-dirs:
t6035-merge-dir-to-symlink depends on SYMLINKS prerequisite
git-checkout: be careful about untracked symlinks
lstat_cache: guard against full match of length of 'name' parameter
Demonstrate bugs when a directory is replaced with a symlink
The last check in the second block of checks in the &git_snapshot routine
is never executed because the second to last check is a superset of the
last check.
Switch the order of the last two checks. It has the advantage of giving
clients a more specific reason why they cannot get a snapshot format if
the format they have chosen is disabled.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the <name> placeholder to <tagname> in the SYNOPSIS section of
git-tag documentation, and describe it in the OPTIONS section in a way
similar to how documentation for git-branch does.
Add SEE ALSO section to list the other documentation pages these two pages
refer to.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checkout sees that HEAD points to a non-existent ref,
it currently acts as if "-f" was given; this behavior dates
back to 5a03e7f, which enabled checkout from unborn branches
in the shell version of "git-checkout". The reasoning given
is to avoid the code path which tries to merge the tree
contents. When checkout was converted to C, this code
remained intact.
The unfortunate side effect of this strategy is that the
"force" code path will overwrite working tree and index
state that may be precious to the user. Instead of enabling
"force", this patch uses the normal "merge" codepath for an
unborn branch, but substitutes the empty tree for the "old"
commit.
This means that in the absence of an index, any files in the
working tree will be treated as untracked files, and a
checkout which would overwrite them is aborted. Similarly,
any paths in the index will be merged with an empty entry
as the base, meaning that unless the new branch's content is
identical to what's in the index, there will be a conflict
and the checkout will be aborted.
The user is then free to correct the situation or proceed
with "-f" as appropriate.
This patch also removes the "warning: you are on a branch
yet to be born" message. Its function was to warn the user
that we were enabling the "-f" option. Since we are no
longer doing that, there is no reason for the user to care
whether we are switching away from an unborn branch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If all refs sent by the remote repo during a fetch are reachable
locally, then no further conversation is performed with the remote. This
check is skipped when the --depth argument is provided to allow the
deepening of a shallow clone which corresponding remote repo has no
changed.
However, some additional filtering was added in commit c29727d5 to
remove those refs which are equal on both sides. If the remote repo has
not changed, then the list of refs to give the remote process becomes
empty and simply attempting to deepen a shallow repo always fails.
Let's stop being smart in that case and simply send the whole list over
when that condition is met. The remote will do the right thing anyways.
Test cases for this issue are also provided.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests help make sure graph_is_interesting() is doing the right
thing.
Signed-off-by: Adam Simpkins <simpkins@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mr/gitweb-xz:
gitweb: add support for XZ compressed snapshots
gitweb: update INSTALL regarding specific snapshot settings
gitweb: support to globally disable a snapshot format
Since 4afbaef (gitweb: ref markers link to named shortlogs, 2008-09-02),
ref markers that accompany the subject in views such as shortlog and
history point to something different from the subject itself. Therefore,
they should not be included in the same <a> element.
Benefits of the change are:
* better compliance to the XHTML standards, that forbid links within
links even though the restriction cannot be imposed via DTD; this also
benefits visualization in some older browsers;
* when hovering the subject, only the subject itself is underlined; when
hovering the ref markers, only the text in the hovered ref marker is
underlined; previously, hovering any written part of the subject column
led to complete underlying of everything at the same time, with
unpleasing effects.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thell Fowler noticed that various "ignore whitespace" options to git diff
do not work well on an incomplete line.
The loop control of the function responsible for these bugs was extremely
difficult to follow. This patch restructures the loops for three variants
of "ignore whitespace" logic.
The basic idea of the re-written logic is:
- A loop runs while the characters from both strings we are looking at
match. We declare unmatch immediately when we find something that does
not match and return false from the function. We break out of the loop
if we ran out of either side of the string.
The way we skip spaces inside this loop varies depending on the style
of ignoring whitespaces.
- After the above loop breaks, we know that the parts of the strings we
inspected so far match, ignoring the whitespaces. The lines can match
only if the remainder consists of nothing but whitespaces. This part
of the logic is shared across all three styles.
The new code is more obvious and should be much easier to follow.
Tested-by: Thell Fowler <git@tbfowler.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Upon seeing a whitespace, xdl_hash_record_with_whitespace() first skipped
the run of whitespaces (excluding LF) that begins there, ensuring that the
pointer points at the last whitespace character in the run, and assumed
that the next character must be LF at the end of the line. This does not
work when hashing an incomplete line, which lacks the LF at the end.
Introduce "at_eol" variable that is true when either we are at the end of
line (looking at LF) or at the end of an incomplete line, and use that
instead throughout the code.
Noticed by Thell Fowler.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patch to improve approxidate got us to the point that a lot
of the remaining annoyances were due to the 'strict' date handling running
first, and deciding that it got a good enough date that the approximate
date routines were never even invoked.
For example, using a date string like
6AM, June 7, 2009
the strict date logic would be perfectly happy with the "June 7, 2009"
part, and ignore the 6AM part that it didn't understand - resulting in the
information getting dropped on the floor:
6AM, June 7, 2009 -> Sat Jun 6 00:00:00 2009
and the date being calculated as if it was midnight, and the '6AM' having
confused the date routines into thinking about '6 June' rather than 'June
7' at 6AM (ie notice how the _day_ was wrong due to this, not just the
time).
So this makes the strict date routines a bit stricter, and requires that
not just the date, but also the time, has actually been parsed. With that
fix, and trivial extension of the approxidate routines, git now properly
parses the date as
6AM, June 7, 2009 -> Sun Jun 7 06:00:00 2009
without dropping the fuzzy time ("6AM" or "noon" or any of the other
non-strict time formats) on the floor.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is not a new failure mode - approxidate has always been kind of
random in the input it accepts, but some of the randomness is more
irritating than others.
For example:
Jun 6, 5AM -> Mon Jun 22 05:00:00 2009
5AM Jun 6 -> Sat Jun 6 05:00:00 2009
Whaa? The reason for the above is that approxidate squirrells away the '6'
from "Jun 6" to see if it's going to be a relative number, and then
forgets about it when it sees a new number (the '5' in '5AM'). So the odd
"June 22" date is because today is July 22nd, and if it doesn't have
another day of the month, it will just pick todays mday - having ignored
the '6' entirely due to getting all excited about seeing a new number (5).
There are other oddnesses. This does not fix them all, but I think it
makes for fewer _really_ perplexing cases. At least now we have
Jun 6, 5AM -> Sat Jun 6 05:00:00 2009
5AM, Jun 6 -> Sat Jun 6 05:00:00 2009
which makes me happier. I can still point to cases that don't work as
well, but those are separate issues.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git reset without argument displays a summary of the local modification,
like this:
$ git reset
Makefile: locally modified
Some people have problems with this; they look like an error message.
This patch makes its output mimic how "git checkout $another_branch"
reports the paths with local modifications. "git add --refresh --verbose"
is changed in the same way.
It also adds a header to make it clear that the output is informative,
and not an error.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
The change in the output is going to become more general than just saying
"changed", so let's make the variable name more general too.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/replace:
t6050: check pushing something based on a replaced commit
Documentation: add documentation for "git replace"
Add git-replace to .gitignore
builtin-replace: use "usage_msg_opt" to give better error messages
parse-options: add new function "usage_msg_opt"
builtin-replace: teach "git replace" to actually replace
Add new "git replace" command
environment: add global variable to disable replacement
mktag: call "check_sha1_signature" with the replacement sha1
replace_object: add a test case
object: call "check_sha1_signature" with the replacement sha1
sha1_file: add a "read_sha1_file_repl" function
replace_object: add mechanism to replace objects found in "refs/replace/"
refs: add a "for_each_replace_ref" function
* bc/mailsplit-cr-at-eol:
Allow mailsplit (and hence git-am) to handle mails with CRLF line-endings
builtin-mailsplit.c: remove read_line_with_nul() since it is no longer used
builtin-mailinfo,builtin-mailsplit: use strbufs
strbuf: add new function strbuf_getwholeline()
Previously, graph_is_interesting() did not behave quite the same way as
the code in get_revision(). As a result, it would sometimes think
commits were uninteresting, even though get_revision() would return
them. This resulted in incorrect lines in the graph output.
This change creates a get_commit_action() function, which
graph_is_interesting() and simplify_commit() both now use to determine
if a commit will be shown. It is identical to the old simplify_commit()
behavior, except that it never calls rewrite_parents().
This problem was reported by Santi Béjar. The following command
would exhibit the problem before, but now works correctly:
git log --graph --simplify-by-decoration --oneline v1.6.3.3
Previously git graph did not display the output for this command
correctly between f29ac4f and 66996ec, among other places.
Signed-off-by: Adam Simpkins <simpkins@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We skip t7407 because a patch series is cooking that uses is.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many projects using submodules expect all submodules to be checked out
in order to build/work correctly. A common command sequence for
developers on such projects is:
git clone url/to/project
cd project
git submodule update --init (--recursive)
This patch introduces the --recursive option to git-clone. The new
option causes git-clone to recursively clone and checkout all
submodules of the cloned project. Hence, the above command sequence
can be reduced to:
git clone --recursive url/to/project
--recursive is ignored if no checkout is done by the git-clone.
The patch also includes documentation and a selftest.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The substring expansion notation is a bashism that we have not so far
adopted. Use 'git rev-parse --short' instead, as this also handles
the case where the unique abbreviation is longer than 7 characters.
Also fix the typo; the object name for submodule #2 was copied from
submodule #1's by mistake.
Suggested-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This 'ifndef' macro is entered only when __sun__ is not defined. This test
will never fail since it is located inside of the 'else' branch of an 'if'
macro which tests whether __sun__ is defined. It has had no effect since
the merge at 436f66b7.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a new color for commits that don't have any previously printed
children. The following command demonstrates the changes:
git log --graph --pretty=tformat:'%h %s%n' -7 481c7a618b0793
Now the two independent lines of development are displayed with
different colors, instead of both using the same color.
Signed-off-by: Adam Simpkins <simpkins@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only show
status for all the submodules in the current repo (which is what is
currently done by 'git submodule status'), but also to show status for
all submodules at all levels (i.e. recursing into nested submodules as
well).
This patch teaches the new --recursive option to the 'git submodule status'
command. The patch also includes documentation and selftests.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only update
the submodules in the current repo (which is what is currently done by
'git submodule update'), but also to operate on all submodules at all
levels (i.e. recursing into nested submodules as well).
This patch teaches the new --recursive option to the 'git submodule update'
command. The patch also includes documentation and selftests.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only operate
on all the submodules in the current repo (which is what is currently done
by 'git submodule foreach'), but also to operate on all submodules at all
levels (i.e. recursing into nested submodules as well).
This patch teaches the new --recursive option to the 'git submodule foreach'
command. The patch also includes documentation and selftests.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add verification of the behaviour of '$name' to the git submodule
foreach selftest.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The selftest verifies that:
- only checked out submodules are visited by 'git submodule foreach'
- the $path, and $sha1 variables are set correctly for each submodule
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If SVN_SSH is defined, it will be used. Else value in
GIT_SSH is copied to SVN_SSH & then, only on Windows,
the \s are escaped.
On Windows, the shell-variables must be set as follows
GIT_SSH="C:\Program Files\PuTTY\plink.exe"
SVN_SSH="C:\\Program Files\\PuTTY\\plink.exe"
See http://code.google.com/p/msysgit/issues/detail?id=305
[ew: fixed indentation to use tabs]
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Karthik Rajagopalan <karthikr@fastmail.fm>
And then unescape them when writing to $GIT_CONFIG.
SVN has different rules for repository URLs (usually the root)
and for paths within that repository (below the HTTP layer).
Thus, for the request URI path at the HTTP level, the URI needs
to be encoded. However, in the body of the HTTP request (the
with underlying SVN XML protocol), those paths should not be
URI-encoded[1]. For non-HTTP(S) requests, SVN appears to be
more flexible and will except weird characters in the URL as
well as URI-encoded ones.
Since users are used to using URLs being entirely URI-encoded,
git svn will now attempt to unescape the path portion of URLs
while leaving the actual repository URL untouched.
This change will be reflected in newly-created $GIT_CONFIG files
only. This allows users to switch between svn(+ssh)://, file://
and http(s):// urls without changing the fetch/branches/tags
config keys. This won't affect existing imports at all (since
things didn't work before this commit anyways), and will allow
users to force escaping into repository paths that look like
they're escaped (but are not).
Thanks to Mike Smullin for the original bug report and Björn
Steinbrink for summarizing it into testable cases for me.
[1] Except when committing copies/renames, see
commit 29633bb91c
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The note about interoperating in different timezones and such is about
localtime argument, not parent.
Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
* maint:
filter-branch: make the usage string fit on 80 chars terminals.
filter-branch: add an example how to add ACKs to a range of commits
docs: describe impact of repack on "clone -s"
They are both slower than the new BLK_SHA1 implementation, so it is
pointless to keep them around.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this, the code should now be portable to any C compiler.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We rely on ntohl() and htonl() to perform byte swapping in many places.
However, some platforms have libraries providing really poor
implementations of those which might cause significant performance
issues, especially with the block-sha1 code.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make append_remote_object_url() (and by implication,
get_remote_object_url) use end_url_with_slash() to ensure that the url
ends with a slash.
Previously, they assumed that the url did not end with a slash and
as a result appended a slash, sometimes errorneously.
This fixes an issue introduced in 5424bc5 ("http*: add helper methods
for fetching objects (loose)"), where the append_remote_object_url()
implementation in http-push.c, which assumed that urls end with a
slash, was replaced by another one in http.c, which assumed urls did
not end with a slash.
The above issue was raised by Thomas Schlichter:
http://marc.info/?l=git&m=125043105231327
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Tested-by: Thomas Schlichter <thomas.schlichter@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It used to be a single, huge line, badly wrapped by xterm.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit de435ac0 changed the behavior of --decorate from printing the
full ref (e.g., "refs/heads/master") to a shorter, more human-readable
version (e.g., just "master"). While this is nice for human readers,
external tools using the output from "git log" may prefer the full
version.
This patch introduces an extension to --decorate to allow the caller to
specify either the short or the full versions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The argument to 'git submodule foreach' already has access to the variables
'$path' (the path to the submodule, relative to the superproject) and '$sha1'
(the submodule commit recorded by the superproject).
This patch adds another variable -- '$name' -- which contains the name of the
submodule, as recorded in the superproject's .gitmodules file.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a 64-bit value, hence having it first provides a better
alignment.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have to add certain lines like ACKs (or for that matter,
Signed-off-by:s) to a range of commits starting with HEAD, you might
be tempted to use 'git rebase -i -10', but that is a waste of your
time.
It is better to use 'git filter-branch' with an appropriate message
filter, and this commit adds an example how to do so to
filter-branch's man page.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merlyn noticed that Documentation/install-doc-quick.sh no longer correctly
removes old installed documents when the target directory has a leading
path that is a symlink. It turns out that "checkout-index --prefix" was
broken by recent b6986d8 (git-checkout: be careful about untracked
symlinks, 2009-07-29).
I suspect has_symlink_leading_path() could learn the third parameter
(prefix that is allowed to be symlinked directories) to allow us to retire
a similar function has_dirs_only_path().
Another avenue of fixing this I considered was to get rid of base_dir and
base_dir_len from "struct checkout", and instead make "git checkout-index"
when run with --prefix mkdir the leading path and chdir in there. It
might be the best longer term solution to this issue, as the base_dir
feature is used only by that rather obscure codepath as far as I know.
But at least this patch should fix this breakage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reading the index into an empty file has been broken by
5a56da5806, since it causes the existing
index to always be loaded first, and dies if it's an empty file:
$ GIT_INDEX_FILE=`mktemp` git read-tree master
fatal: index file smaller than expected
It breaks for instance committing from git.el. This patch reverts to the
previous behavior of only loading the index when merging it.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The effects of repacking on a repository with alternates are a bit
subtle. The two main things users will want are:
1. Not to waste disk space by accidentally copying objects which could
be shared.
2. Copying all objects explicitly to break the dependency on the source
repo.
This patch describes both under the "clone -s" documentation. It makes
sense to put it there rather than in git-repack.txt for both cases.
For (1), we are warning the user who is using "clone -s" about what _not_
to do, so we need to get their attention when reading about "clone -s".
For (2), we are telling them how git-repack can be used to accomplish a
task, but until they know that git-repack is the right tool, they have no
reason to look at the repack documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/block-sha1:
block-sha1/sha1.c: silence compiler complaints by casting void * to char *
block-sha1: more good unaligned memory access candidates
block-sha1: support for architectures with memory alignment restrictions
block-sha1: split the different "hacks" to be individually selected
block-sha1: move code around
block-sha1: improve code on large-register-set machines
block-sha1: improved SHA1 hashing
block-sha1: perform register rotation using cpp
block-sha1: get rid of redundant 'lenW' context
block-sha1: Use '(B&C)+(D&(B^C))' instead of '(B&C)|(D&(B|C))' in round 3
block-sha1: macroize the rounds a bit further
block-sha1: re-use the temporary array as we calculate the SHA1
block-sha1: make the 'ntohl()' part of the first SHA1 loop
block-sha1: minor fixups
block-sha1: try to use rol/ror appropriately
block-sha1: undo ctx->size change
Add new optimized C 'block-sha1' routines
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Parse arbitrary commit-ish in SHA1 field
gitk: Fix direction of symmetric difference in optimized mode
gitk: New option to hide remote refs
gitk: Do not hard-code "encoding" in attribute lookup functions
This adds a hunk-based mode to git-stash. You can select hunks from
the difference between HEAD and worktree, and git-stash will build a
stash that reflects these changes. The index state of the stash is
the same as your current index, and we also let --patch imply
--keep-index.
Note that because the selected hunks are rolled back from the worktree
but not the index, the resulting state may appear somewhat confusing
if you had also staged these changes. This is not entirely
satisfactory, but due to the way stashes are applied, other solutions
would require a change to the stash format.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a --patch mode for git-checkout. In the index usage
git checkout --patch -- [files...]
it lets the user discard edits from the <files> at the granularity of
hunks (by selecting hunks from 'git diff' and then reverse applying
them to the worktree).
We also accept a revision argument. In the case
git checkout --patch HEAD -- [files...]
we offer hunks from the difference between HEAD and the worktree, and
reverse applies them to both index and worktree, allowing you to
discard staged changes completely. In the non-HEAD usage
git checkout --patch <revision> -- [files...]
it offers hunks from the difference between the worktree and
<revision>. The chosen hunks are then applied to both index and
worktree.
The application to worktree and index is done "atomically" in the
sense that we first check if the patch applies to the index (it should
always apply to the worktree). If it does not, we give the user a
choice to either abort or apply to the worktree anyway.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a --patch mode for git-reset. The basic case is
git reset --patch -- [files...]
which acts as the opposite of 'git add --patch -- [files...]': it
offers hunks for *un*staging. Advanced usage is
git reset --patch <revision> -- [files...]
which offers hunks from the diff between the index and <revision> for
forward application to the index. (That is, the basic case is just
<revision> = HEAD.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 0392513 (add-interactive: refactor mode hunk handling, 2009-04-16),
we merged the interaction loops for mode changes and hunk staging.
This was fine at the time, because 0beee4c (git-add--interactive:
remove hunk coalescing, 2008-07-02) removed hunk coalescing.
However, in 7a26e65 (Revert "git-add--interactive: remove hunk
coalescing", 2009-05-16), we resurrected it. Since then, the code
would attempt in vain to merge mode changes with diff hunks,
corrupting both in the process.
We add a check to the coalescing loop to ensure it only looks at diff
hunks, thus skipping mode changes.
Noticed-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to stage changes to file which has also pending `chmod +x`,
`git add -p` produces lots of 'Use of uninitialized value ...' warnings
and fails to do the job:
$ echo content >> file
$ chmod +x file
$ git add -p
diff --git a/file b/file
index e69de29..d95f3ad
--- a/file
+++ b/file
old mode 100644
new mode 100755
Stage mode change [y,n,q,a,d,/,j,J,g,?]? y
@@ -0,0 +1 @@
+content
Stage this hunk [y,n,q,a,d,/,K,g,e,?]? y
Use of uninitialized value $o_ofs in addition (+) at .../git-add--interactive line 776.
Use of uninitialized value $ofs in numeric le (<=) at .../git-add--interactive line 806.
Use of uninitialized value $o0_ofs in concatenation (.) or string at .../git-add--interactive line 830.
Use of uninitialized value $n0_ofs in concatenation (.) or string at .../git-add--interactive line 830.
Use of uninitialized value $o_ofs in addition (+) at .../git-add--interactive line 776.
fatal: corrupt patch at line 5
diff --git a/file b/file
index e69de29..d95f3ad
--- a/file
+++ b/file
@@ -,0 + @@
+content
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earlier implementation of --dry-run didn't duplicate the use of color
"git status -v" set up for diff output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git submodule summary is providing similar functionality for submodules as
git diff-index does for a git project (including the meaning of --cached).
But the analogon to git diff-files is missing, so add a --files option to
summarize the differences between the index of the super project and the
last commit checked out in the working tree of the submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of a cleartext password, the CVS pserver expects a scrambled one
in the authentication request. With this patch it is possible to import
CVS repositories only accessible via pserver and user/password.
Signed-off-by: Dirk Hoerner <dirker@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce size of git-favicon.png using a combination of optipng and
pngout. From 164 bytes to 115 bytes (30% reduction). Also reduce
git-logo.png's size by one byte using advcomp.
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The change makes sure a stash (given or default) exists before
checking if the working tree is dirty.
If the default stash is requested, the old message was scary and
included a 'fatal' error from rev-parse:
fatal: Needed a single revision
: no valid stashed state found
It is replaced with a friendlier 'Nothing to apply' error, similar to
'git stash branch'.
If a specific stash is specified, the 'Needed a single revision' errors
from rev-parse are suppressed.
Signed-off-by: Ori Avtalion <ori@avtalion.name>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some compilers produce errors when arithmetic is attempted on pointers to
void. We want computations done on byte addresses, so cast them to char *
to work them around.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jn/gitweb-blame' (early part):
gitweb: Use light/dark for class names also in 'blame' view
gitweb: Add author initials in 'blame' view, a la "git gui blame"
gitweb: Mark commits with no "previous" in 'blame' view
gitweb: Use "previous" header of git-blame -p in 'blame' view
gitweb: Mark boundary commits in 'blame' view
gitweb: Make .error style generic
This moves the call setup for 'git add--interactive' to a separate
function, as other users will call it without running
validate_pathspec() first.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests for {reset,commit,stash} -p will frequently have to set both
worktree and index states to known values, and verify that the outcome
(again both worktree and index) are what was expected.
Add a small helper library that lets us do these tasks more easily.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes some aspects of the 'git add -p' loop configurable (within
the code), so that we can later reuse git-add--interactive for other
similar tools.
Most fields are fairly straightforward, but APPLY gets a subroutine
(instead of just a string a la 'apply --cached') so that we can handle
'checkout -p', which will need to atomically apply the patch twice
(index and worktree).
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When unpack-objects is run under the --strict option, objects that have
pointers to other objects are verified for the reachability at the end, by
calling check_object() on each of them, and letting check_object to walk
the reachable objects from them using fsck_walk() recursively.
The function however misunderstands the semantics of fsck_walk() function
when it makes a call to it, setting itself as the callback. fsck_walk()
expects the callback function to return a non-zero value to signal an
error (negative value causes an immediate abort, positive value is still
an error but allows further checks on sibling objects) and return zero to
signal a success. The function however returned 1 on some non error
cases, and to cover up this mistake, complained only when fsck_walk() did
not detect any error.
To fix this double-bug, make the function return zero on all success
cases, and also check for non-zero return from fsck_walk() for an error.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to X86, PowerPC and S390 are capable of unaligned memory
accesses.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only accepted either SHA1s or heads/tags that have been read. This
meant the user could not, e.g., enter HEAD to go back to the current
commit.
This adds code to call out to git rev-parse --verify if all other
methods of interpreting the string the user entered fail.
(git-rev-parse alone is not enough as we really want a single
revision.)
The error paths change slighly, because we now know from the rev-parse
invocation whether the expression was valid at all. The previous
"unknown" path is now only triggered if the revision does exist, but
is not in the current view display.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Paul Mackerras <paulus@samba.org>
ee66e08 (gitk: Make updates go faster, 2008-05-09) implemented an
optimized mode where gitk parses the arguments with rev-parse, and
manually reads history in chunks. As mentioned in the commit message,
symmetric differences are a problem there:
One wrinkle is that we have to turn symmetric diff arguments (of the
form a...b) back into symmetric diff form so that --left-right still
works, as git rev parse turns a...b into a b ^merge_base(a,b).
However, git-rev-parse returns a...b in the swapped order
b a ^merge_base(a,b)
This has been the case since at least 1f8115b (the state of master at
the time of the abovementioned ee66e08; Merge branch 'maint',
2008-05-08). So gitk flipped the sides of symmetric differences
whenever it was in optimized mode.
Fix this by swapping the sides of the reconstruction code.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Paul Mackerras <paulus@samba.org>
In repositories with lots of remotes, looking at the history in gitk
can be borderline insane with all the red labels for remote refs.
Introduce a new option in the preferences that makes gitk ignore
remote refs entirely, so they don't take up space in the display.
Wished-for-by: Thell Fowler <tbfowler4@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Commit 39ee47e (Clean up file encoding code and add enable/disable option,
2008-10-15) rewrote the attribute lookup functions gitattr and
cache_gitattr, but in the process hard-coded the attribute name "encoding"
instead of using the functions' parameters. This fixes it.
This is not a serious regression because currently all callers look only
for "encoding".
Further note that this fix assumes that future callers will not pass an
attribute name that contains regex special characters.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
It may be convenient for some users to store svn remote tracking
branches outside of the refs/remotes/ heirarchy.
To accomplish this feat, this patch includes the entire path to
the ref in $r->{'refname'} in &read_all_remotes and tries to change
references to this entry so the new value makes sense.
[ew: fixed backwards compatibility, long lines]
Signed-off-by: Adam Brewster <adambrewster@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since "trunk" is a convention for the main development branch in
the SVN world, try to make that the master branch upon initial
checkout if it exists. This is probably less surprising based
on user requests.
t9135 was the only test which relied on the previous behavior
and thus needed to be modified.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* maint:
push: point to 'git pull' and 'git push --force' in case of non-fast forward
Documentation: add: <filepattern>... is optional
Change mentions of "git programs" to "git commands"
Documentation: merge: one <remote> is required
help.c: give correct structure's size to memset()
* maint-1.6.3:
Change mentions of "git programs" to "git commands"
Documentation: merge: one <remote> is required
help.c: give correct structure's size to memset()
'git push' failing because of non-fast forward is a very common situation,
and a beginner does not necessarily understand "fast forward" immediately.
Add a new section to the git-push documentation and refer them to it.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
<filepattern>... is optional (e.g. when the --all or --update
options are used) so use square brackets in the synopsis.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the docs and printouts refer to "commands" when discussing what
the end users call via the "git" top-level program. We should refer them
as "git programs" when we discuss the fact that the commands are
implemented as separate programs, but in other contexts, it is better to
use the term "git commands" consistently.
Signed-off-by: Ori Avtalion <ori@avtalion.name>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge only requires one <remote>, so "<remote>..." should be used in the
synopsis (and not "<remote> <remote>...").
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two structures are of the same type, but we'd better be consistent.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing a "pull --rebase", we check to make sure that the index and
working tree are clean. The index-clean check compares the index against
HEAD. The test erroneously reports dirtiness if we don't have a HEAD yet.
In such an "unborn branch" case, by definition, a non-empty index won't
be based on whatever we are pulling down from the remote, and will lose
the local change. Just check if $GIT_DIR/index exists and error out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed on architectures with poor or non-existent unaligned memory
support and/or no fast byte swap instruction (such as ARM) by using byte
accesses to memory and shifting the result together.
This also makes the code portable, therefore the byte access methods are
the defaults. Any architecture that properly supports unaligned word
accesses in hardware simply has to enable the alternative methods.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is to make it easier for them to be selected individually depending
on the architecture instead of the other way around i.e. having each
architecture select a list of hacks up front. That makes for clearer
documentation as well.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the code around so specific architecture hacks are defined first.
Also make one line comments actually one line. No code change.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jp/symlink-dirs:
t6035-merge-dir-to-symlink depends on SYMLINKS prerequisite
git-checkout: be careful about untracked symlinks
lstat_cache: guard against full match of length of 'name' parameter
Demonstrate bugs when a directory is replaced with a symlink
* js/run-command-updates:
api-run-command.txt: describe error behavior of run_command functions
run-command.c: squelch a "use before assignment" warning
receive-pack: remove unnecessary run_status report
run_command: report failure to execute the program, but optionally don't
run_command: encode deadly signal number in the return value
run_command: report system call errors instead of returning error codes
run_command: return exit code as positive value
MinGW: simplify waitpid() emulation macros
For x86 performance (especially in 32-bit mode) I added that hack to write
the SHA1 internal temporary hash using a volatile pointer, in order to get
gcc to not try to cache the array contents. Because gcc will do all the
wrong things, and then spill things in insane random ways.
But on architectures like PPC, where you have 32 registers, it's actually
perfectly reasonable to put the whole temporary array[] into the register
set, and gcc can do so.
So make the 'volatile unsigned int *' cast be dependent on a
SMALL_REGISTER_SET preprocessor symbol, and enable it (currently) on just
x86 and x86-64. With that, the routine is fairly reasonable even when
compared to the hand-scheduled PPC version. Ben Herrenschmidt reports on
a G5:
* Paulus asm version: about 3.67s
* Yours with no change: about 5.74s
* Yours without "volatile": about 3.78s
so with this the C version is within about 3% of the asm one.
And add a lot of commentary on what the heck is going on.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid git ending with this message:
"Patch format is not supported."
With improved error message in the format detection failure case by
Giuseppe Bilotta.
Signed-off-by: Nicolas Sebrecht <ni.s@laposte.net>
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We traditionally allowed a mbox file or a directory name of a maildir (but
never an individual file inside a maildir) to be given to "git am". Even
though an individual file in a maildir (or more generally, a piece of
RFC2822 e-mail) is not a mbox file, it contains enough information to
create a commit out of it, so there is no reason to reject one. Running
mailsplit on such a file feels stupid, but it does not hurt.
This builds on top of a5a6755 (git-am foreign patch support: introduce
patch_format, 2009-05-27) that introduced mailbox format detection. The
codepath to deal with a mbox requires it to begin with "From " line and
also allows it to begin with "From: ", but a random piece of e-mail can
and often do begin with any valid RFC2822 header lines.
Instead of checking the first line, we extract all the lines up to the
first empty line, and make sure they look like e-mail headers.
A test is added to t4150 to demonstrate this feature.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If your name is, say, Üwë, you want your cover letters to appear
correctly. Convince format-patch to mark it as 8-bit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change commit() to stream data from Perforce and into fast-import
rather than reading into memory first, and then writing out. This
hugely reduces the memory requirements when cloning non-incrementally.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In new_http_object_request(), check ftruncate() call return value and
handle possible errors.
Signed-off-by: Jeff Lasslett <jeff.lasslett@gmail.com>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use preq->url in new_http_pack_request and freq->url in
new_http_object_request when calling curl_setopt(CURLOPT_URL), instead
of using an intermediate variable, 'url'.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Free preq in new_http_pack_request when aborting. preq was allocated
before jumping to the 'abort' label so this is safe.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://git.bogomips.org/git-svn:
git-svn: ignore leading blank lines in svn:ignore
svn: Honor --prefix option in init without --stdlayout
svn: Add && to t9107-git-svn-migrate.sh
The benefit of this one alone is somewhat iffy, but for completeness this
moves the wt_status_colors[] color palette to the wt_status structure to
complete the libification started by the previous commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Turn four global variables (wt_status_use_color, show_tracked_files,
wt_status_relative_paths, and wt_status_submodule_summary) into fields of
wt_status structure. They can also lose "wt_status_" prefix.
Get rid of "untracked" field that was used only to keep track of otherwise
available information redundantly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subversion ignores all blank lines in svn:ignore properties. The old
git-svn code ignored blank lines everywhere except for the first line
of the svn:ignore property. This patch makes the "git svn
show-ignore" and "git svn create-ignore" commands ignore leading blank
lines, too.
Also include leading blank lines in the test suite.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Most users who type
git svn init file:///tmp/repo --prefix=my-svn/
would expect the root of the svn repository to be tracked by
refs/remotes/my-svn/git-svn.
Acked-by: Eric Wong <normalperson@yhbt.net>
It was probably intended for the test to fail unless all of the
commands succeed.
[ew: fixed tests to actually work]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The script was looking for something that matched the '^our $gitbin'
regex, which no longer exists in gitweb.cgi.
Now it looks for 'MOD_PERL', which should be on the line that checks
to see if the script is running in a mod_perl environment.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an example to the stash documentation that shows how to quickly
find candidate commits among the 'git fsck --unreachable' output.
Unless you have merges of branch names containing WIP, or edit your
merge messages to say WIP, there will be no false positives.
Snippet written by Björn "doener" Steinbrink and me after zepolen_
asked on IRC.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously when merging directly from a local tracking
branch like:
git merge origin/master
The merge message said:
Merge commit 'origin/master'
* commit 'origin/master':
...
Instead, let's be more explicit about what we are merging:
Merge remote branch 'origin/master'
* origin/master:
...
We accomplish this by recognizing remote tracking branches
in git-merge when we build the simulated FETCH_HEAD output
that we feed to fmt-merge-msg.
In addition to a new test in t7608, we have to tweak the
expected output of t3409, which does such a merge.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we have both a tag and a branch named "foo", then calling
"git merge foo" will warn about the ambiguous ref, but merge
the tag.
When generating the commit message, though, we simply
checked whether "refs/heads/foo" existed, and if it did,
assumed it was a branch. This led to the statement "Merge
branch 'foo'" in the commit message, which is quite wrong.
Instead, we should use dwim_ref to find the actual ref used,
and describe it appropriately.
In addition to the test in t7608, we must also tweak the
expected output of t4202, which was accidentally triggering
this bug.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling "git merge $X", we automatically generate a
commit message containing something like "Merge branch
'$X'". This test script checks that those messages say what
they should, and exposes a failure when merging a refname
that is ambiguous between a tag and a branch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is useful if you want to specify GIT_TEST_OPTS that you
always use.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests generate a large amount of I/O activity creating
and destroying repositories and files. We can improve the
time it takes to run the test suite by creating trash
directories on filesystems with better performance
characteristic, even though we may not want the rest of the
git repository on those filesystems (e.g., because they are
not network connected, or because they are temporary
ramdisks).
For example, on a dual processor system:
$ cd t && time make -j32
real 1m51.562s
user 0m59.260s
sys 1m20.933s
# /dev/shm is tmpfs
$ cd t && time make -j32 GIT_TEST_OPTS="--root=/dev/shm"
real 1m1.484s
user 0m53.555s
sys 1m5.264s
We almost halve the wall clock time, and we utilize the
dual processors much better.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most scripts don't care about the absolute path to the trash
directory. The one exception was t4014 script, which pieced
together $TEST_DIRECTORY and $test itself to get an absolute
directory.
Instead, let's provide a $TRASH_DIRECTORY which specifies
the same thing. This keeps the $test variable internal to
test-lib.sh and paves the way for trash directories in other
locations.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The $TEST_DIRECTORY variable allows tests to find the
top-level test directory regardless of the current working
directory.
In the past, this has been used to accomodate tests which
change directories, but it is also the first step to being
able to move trash directories outside of the
$TEST_DIRECTORY hierarchy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test for correct permissions after init created a deep directory
must be guarded by POSIXPERM. But testing that the deep dirctory exists
is good even on platforms that do not provide the POSIXPERM prerequiste.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this change, grep fails because it does not find the file
instead of because it does not find the text in the file.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches --dry-run option to "git commit".
It is the same as "git status", but in the longer term we would want to
change the semantics of "git status" not to be the preview of commit, and
this is the first step for doing so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I think I have found a way to avoid the gcc crazyness.
Lookie here:
# TIME[s] SPEED[MB/s]
rfc3174 5.094 119.8
rfc3174 5.098 119.7
linus 1.462 417.5
linusas 2.008 304
linusas2 1.878 325
mozilla 5.566 109.6
mozillaas 5.866 104.1
openssl 1.609 379.3
spelvin 1.675 364.5
spelvina 1.601 381.3
nettle 1.591 383.6
notice? I outperform all the hand-tuned asm on 32-bit too. By quite a
margin, in fact.
Now, I didn't try a P4, and it's possible that it won't do that there, but
the 32-bit code generation sure looks impressive on my Nehalem box. The
magic? I force the stores to the 512-bit hash bucket to be done in order.
That seems to help a lot.
The diff is trivial (on top of the "rename registers with cpp" patch), as
appended. And it does seem to fix the P4 issues too, although I can
obviously (once again) only test Prescott, and only in 64-bit mode:
# TIME[s] SPEED[MB/s]
rfc3174 1.662 36.73
rfc3174 1.64 37.22
linus 0.2523 241.9
linusas 0.4367 139.8
linusas2 0.4487 136
mozilla 0.9704 62.9
mozillaas 0.9399 64.94
that's some really impressive improvement. All from just saying "do the
stores in the order I told you to, dammit!" to the compiler.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of letting the compiler to figure out the optimal way to rotate
register usage, explicitly rotate the register names with cpp.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When this option is given, the command does not verify the pack contents,
but shows the delta chain histogram. If used with --verbose, the usual
list of objects is also shown.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint: (95 commits)
verify-pack -v: do not report "chain length 0"
t5510: harden the way verify-pack is used
gitweb/README: Document $base_url
Documentation: git submodule: add missing options to synopsis
Better usage string for reflog.
hg-to-git: don't import the unused popen2 module
send-email: remove debug trace
config: Keep inner whitespace verbatim
GIT 1.6.4
GIT 1.6.3.4
config.txt: document add.ignore-errors
request-pull: allow ls-remote to notice remote.$nickname.uploadpack
Update the documentation of the raw diff output format
git-rerere.txt: Clarify ambiguity of the config variable
t9143: do not fail if Compress::Zlib is missing
Trivial path quoting fixes in git-instaweb
GIT 1.6.4-rc3
Documentation/config.txt: a variable can be defined on the section header line
git svn: make minimize URL more reliable over http(s)
Disable asciidoc 8.4.1+ semantics for `{plus}` and friends
...
When making a histogram of delta chain length in the pack, the program
collects number of objects whose delta depth exceeds the MAX_CHAIN limit
in histogram[0], and showed it as the number of items that exceeds the
limit correctly. HOWEVER, it also showed the same number labeled as
"chain length = 0".
In fact, we are not showing the number of objects whose chain length is
zero, i.e. the base objects. Correct this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test ignored the exit status from verify pack command, and also relied
on not seeing any delta chain statistics.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of installing/copying three programs separately, just install one
and try to make hardlinks to the other two.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a path is unmerged in the index, we used to always say "unmerged" in
the "Changed but not updated" section, even when the path was deleted in
the work tree.
Remove unmerged entries from the "Updated" section, and create a new
section "Unmerged paths". Describe how the different stages conflict
in more detail in this new section.
Note that with the current 3-way merge policy (with or without recursive),
certain combinations of index stages should never happen. For example,
having only stage #2 means that a path that did not exist in the common
ancestor was added by us while the other branch did not do anything to it,
which would have autoresolved to take our addition. The code nevertheless
prepares for the possibility that future merge policies may leave a path
in such a state.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid git ending with this message:
"Patch format is not supported."
With improved error message in the format detection failure case by
Giuseppe Bilotta.
Signed-off-by: Nicolas Sebrecht <ni.s@laposte.net>
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We traditionally allowed a mbox file or a directory name of a maildir (but
never an individual file inside a maildir) to be given to "git am". Even
though an individual file in a maildir (or more generally, a piece of
RFC2822 e-mail) is not a mbox file, it contains enough information to
create a commit out of it, so there is no reason to reject one. Running
mailsplit on such a file feels stupid, but it does not hurt.
This builds on top of a5a6755 (git-am foreign patch support: introduce
patch_format, 2009-05-27) that introduced mailbox format detection. The
codepath to deal with a mbox requires it to begin with "From " line and
also allows it to begin with "From: ", but a random piece of e-mail can
and often do begin with any valid RFC2822 header lines.
Instead of checking the first line, we extract all the lines up to the
first empty line, and make sure they look like e-mail headers.
A test is added to t4150 to demonstrate this feature.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The XZ compression format uses the LZMA2 compression algorithm, which
often yields higher compression ratios than both GZip and BZip2 at the
cost of using more CPU time and RAM. XZ is the slowest for compression,
but still much faster than BZip2 for decompression, almost comparable
to GZip (see benchmarks below).
Some simple benchmarks show the pros and cons of using XZ compression;
starting with an already tarball'd archive of the repos listed below.
Memory usage seemed to be consistent for any given algorithm at their
respective default compression levels.
CPU: AMD Sempron 3400+ (1 core @ 1.8GHz with 256K L2 cache)
Virtual Memory Usage
GZip: 4152K BZip2: 13352K XZ: 102M
Linux 2.6 series (f5886c7f96f2542382d3a983c5f13e03d7fc5259) 349M
gzip 23.70s user 0.47s system 99% cpu 24.227 total 76M
gunzip 3.74s user 0.74s system 94% cpu 4.741 total
bzip2 130.96s user 0.53s system 99% cpu 2:11.97 total 59M
bunzip2 31.05s user 1.02s system 99% cpu 32.355 total
xz 448.78s user 0.91s system 99% cpu 7:31.28 total 51M
unxz 7.67s user 0.80s system 98% cpu 8.607 total
Git (0a53e9ddea) 11M
gzip 0.77s user 0.03s system 99% cpu 0.792 total 2.5M
gunzip 0.12s user 0.02s system 98% cpu 0.142 total
bzip2 3.42s user 0.02s system 99% cpu 3.454 total 2.1M
bunzip2 0.95s user 0.03s system 99% cpu 0.984 total
xz 12.88s user 0.14s system 98% cpu 13.239 total 1.9M
unxz 0.27s user 0.03s system 99% cpu 0.298 total
XZ (669413bb2db954bbfde3c4542fddbbab53891eb4) 1.8M
gzip 0.12s user 0.00s system 95% cpu 0.132 total 442K
gunzip 0.02s user 0.00s system 97% cpu 0.027 total
bzip2 1.28s user 0.01s system 99% cpu 1.298 total 363K
bunzip2 0.15s user 0.01s system 100% cpu 0.157 total
xz 1.62s user 0.03s system 99% cpu 1.652 total 347K
unxz 0.05s user 0.00s system 99% cpu 0.058 total
From a time and memory perspective, nothing compares to GZip, but if
given an average upload speed of 20KB/s, it would take ~400 seconds
longer to transfer the BZip2'd kernel snapshot than the XZ snapshot;
the transfer time difference is even greater between GZip and XZ. The
real time savings are relatively the same for all test cases, but less
dramatic for smaller repositories.
XZ decompresses ~1.8-2 times slower than GZip, and ~2.7-3.75 times
faster than BZip2; XZ gets relatively faster as snapshots get larger.
However, XZ takes relatively longer to compress as snapshots get larger.
The downside for XZ'd snapshots is the large CPU and memory load put on
the server to generate the compressed snapshot, though XZ will
eventually
have threading support, and the real clock time for making XZ'd
snapshots
would decrease if the server had a beefy multi-core CPU.
XZ compression is disabled by default to allow upgrades to take place
without any surprises, as the CPU and memory requirements will be an
issue for high load or lightweight servers. Also, the XZ format is still
new (format declared stable ~6 months ago), and there have been no
"stable" releases of the utils yet.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This includes instructions on how to disable a snapshot format and how
to add options to a snapshot format (e.g. setting the compression
level).
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow Gitweb administrators to set a 'disabled' key in the
%known_snapshot_formats hash to disable a specific snapshot format.
All formats are enabled by default to maintain backwards compatibility.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
.. and simplify the ctx->size logic.
We now count the size in bytes, which means that 'lenW' was always just
the low 6 bits of the total size, so we don't carry it around separately
any more. And we do the 'size in bits' shift at the end.
Suggested by Nicolas Pitre and linux@horizon.com.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's an equivalent expression, but the '+' gives us some freedom in
instruction selection (for example, we can use 'lea' rather than 'add'),
and associates with the other additions around it to give some minor
scheduling freedom.
Suggested-by: linux@horizon.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid repeating the shared parts of the different rounds by adding a
macro layer or two. It was already more cpp than C.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mozilla-SHA1 code did this 80-word array for the 80 iterations. But
the SHA1 state is really just 512 bits, and you can actually keep it in
a kind of "circular queue" of just 16 words instead.
This requires us to do the xor updates as we go along (rather than as a
pre-phase), but that's really what we want to do anyway.
This gets me really close to the OpenSSL performance on my Nehalem.
Look ma, all C code (ok, there's the rol/ror hack, but that one doesn't
strictly even matter on my Nehalem, it's just a local optimization).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps a teeny bit. But what I -really- want to do is to avoid the
whole 80-array loop, and do the xor updates as I go along..
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bert Wesarg noticed non-x86 version of SHA_ROT() had a typo.
Also spell in-line assembly as __asm__(), otherwise I seem to get
error: implicit declaration of function 'asm' from my compiler.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the one with the smaller constant. It _can_ generate slightly
smaller code (a constant of 1 is special), but perhaps more importantly
it's possibly faster on any uarch that does a rotate with a loop.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Undo the change I picked up from the mailing list discussion suggested
by Nico, not because it is wrong, but it will be done at the end of the
follow-up series.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Specify git-http-fetch's dependancies explicitly rather than inheriting from
git-http-push, as that may not be built if the libcurl version is too old or
NO_EXPAT is defined
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we find no refs that may be used for git-describe with the current
options, then die early instead of pointlessly walking the whole
history.
In git.git with all the tags dropped, this makes "git describe" go down
from 0.244 to 0.003 seconds for me. This is especially noticeable with
"git submodule status" which calls describe with increasing levels of
allowed refs to be matched. For a submodule without tags, this means
that it walks the whole history in the submodule twice (first annotated,
then plain tags), just to find out that it can't describe the commit
anyway.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous version expose the output of the plumbing update-index to the
user, which novice users have difficulty to understand.
We still need to run update-index to refresh the cache (if
diff.autorefreshindex is false, git diff won't do it).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Explain briefly what characters are prohibited in tag <name>
and point to git-check-ref-format(1) manual page for
further information.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If one thinks of a revision as the set of commits which can be reached
from the rev, and of ^rev as the complement, then multiple arguments to
git rev-list can be neither understood as the intersection nor the union
of the individual sets.
But set language is the natural as well as logical language in which to
phrase this. So, add a paragraph which explains multiple arguments using
set language.
Suggested-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new infrastructure to find and summarize changes in a single
string list, and rewrite wt_status_print_{updated,changed} functions using
it.
The goal of this change is to give more information on conflicted paths in
the status output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I have 4GB of RAM on my system which should, in theory, be quite enough
to repack a 600 MB repository. However the unbounded delta cache size
always pushes it into swap, at which point everything virtually comes to
a halt. So unbounded caches are never a good idea.
A default of 256MB should be a good compromize between memory usage and
speed where medium sized repositories are still likely to fit in the
cache with a reasonable memory usage, and larger repositories are going
to take quite some time to repack already anyway.
While at it, clarify the associated config variable documentation
entries a bit.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --quiet is given, the user generally only wants to see
errors. So let's suppress printing the ref status table
unless there is an error, in which case we print out the
whole table.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing over the git protocol, pack-objects gives
progress reports about the pack being sent. If "push" is
given the --quiet flag, it now passes "-q" to pack-objects,
suppressing this output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some transports produce output even without "--verbose"
turned on. This provides a way to tell them to be more
quiet (whereas simply redirecting might lose error
messages).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Based on the mozilla SHA1 routine, but doing the input data accesses a
word at a time and with 'htonl()' instead of loading bytes and shifting.
It requires an architecture that is ok with unaligned 32-bit loads and a
fast htonl().
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This splits up git-http-fetch so that it isn't built-in.
It also removes the general dependency on curl, because it is no
longer used by any built-in code. Because they are no longer LIB_OBJS,
add LIB_H to the dependencies of http-related object files, and remove
http.h from the dependencies of transport.o
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/parse-options:
prune-packed: migrate to parse-options
verify-pack: migrate to parse-options
verify-tag: migrate to parse-options
write-tree: migrate to parse-options
Call to_utf8 when parsing author and committer names, otherwise they will appear
with bad encoding if they written by using chop_and_escape_str.
Signed-off-by: Zoltán Füzesi <zfuzesi@eaglet.hu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option --merge was missing for submodule update and --cached for
submodule summary.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not that uncommon to have mails with DOS line-ending, notably
Thunderbird and web mailers like Gmail (when saving what they call
"original" message). So modify mailsplit to convert CRLF line-endings to
just LF.
Since git-rebase is built on top of git-am, add an option to mailsplit to
be used by git-am when it is acting on behalf of git-rebase, to refrain
from doing this conversion.
And add a test to make sure that rebase still works.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There should be no functional change. Just the necessary changes and
simplifications associated with calling strbuf_getwholeline() rather
than an internal function or fgets.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is just like strbuf_getline() except it retains the
line-termination character. This function will be used by the mailinfo
and mailsplit builtins which require the entire line for parsing.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce --ignore-whitespace option and corresponding config bool to
ignore whitespace differences while applying patches, akin to the
'patch' program.
'git am', 'git rebase' and the bash git completion are made aware of
this option.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the transport native helper mechanism to fetch by http (and ftp, etc).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
transport_get() can call transport_native_helper_init() to have list and
fetch-ref operations handled by running a separate program as:
git remote-<something> <remote> [<url>]
This program then accepts, on its stdin, "list" and "fetch <hex>
<name>" commands; the former prints out a list of available refs and
either their hashes or what they are symrefs to, while the latter
fetches them into the local object database and prints a newline when done.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the documentation suggests that 'git merge-base -a' and 'git
show-branch --merge-base' are equivalent (in fact it claims that the
former cannot handle more than two revs).
Alas, the handling of more than two revs is very different. Document
this by tests and correct the documentation to reflect this.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure that usage strings and documentation coincide with each other
and with the actual code.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When comparing the index and a tree, we used to read the contents of the
tree into stage #1 of the index and compared them with stage #0. In order
not to lose sight of entries originally unmerged in the index, we hoisted
them to stage #3 before reading the tree.
Commit d1f2d7e (Make run_diff_index() use unpack_trees(), not read_tree(),
2008-01-19) changed all this. These days, we instead use unpack_trees()
API to traverse the tree and compare the contents with the index, without
modifying the index at all. There is no reason to hoist the unmerged
entries to stage #3 anymore.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since an earlier change to diff-index by d1f2d7e (Make run_diff_index()
use unpack_trees(), not read_tree(), 2008-01-19), we stopped reporting an
unmerged path that does not exist in the tree, but we should.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Importing the popen2 module in Python-2.6 results in the
"DeprecationWarning: The popen2 module is deprecated. Use the
subprocess module." message. The module itself isn't used in fact, so
just removing it solves the problem.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
i686-apple-darwin9-gcc-4.0.1 (GCC) 4.0.1 (Apple Inc. build 5490) compiler
(and probably others) mistakenly thinks variable failed_errno is used
before assigned. Work it around by giving it a fake initialization.
Signed-off-by: David Soria Parra <dsp@php.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Equality between file_parent and file_name was being checked without a
preliminary check for existence of the parameters.
Fix by wrapping the equality check in appropriate if (defined ...),
rearranging the lines to prevent excessive length.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current documentation states that servers typically listen on port
465 and calls this "ssmtp". While it's true that many mail servers use
port 465 for SSL smtp, this is non-standard, and hails from the days
before smtp and submission TLS support, that arrived in RFC2487 and
RFC3207. Port 465 is actually assigned by IANA for unrelated purposes,
and is mostly still used by mail servers today only to support Outlook
Express.
In any case, this patch helps the documentation better reflect both
standards and reality, while still helpfully mentioning ports numbers
that a user may wish to specify.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current documentation confuses non-standard SSL smtp port 465 with
submission port 587 (RFC 4406). This patch just changes the referenced
number.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Configuration values are expected to be quoted when they have leading or
trailing whitespace, but inner whitespace should be kept verbatim even if
the value is not quoted. This is already documented in git-config(1), but
the code caused inner whitespace to be collapsed to a single space,
breaking, for example, clones from a path that has two consecutive spaces
in it, as future fetches would only see a single space.
Reported-by: John te Bokkel <tanj.tanj@gmail.com>
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git fast-export and git fast-import to rewrite the history
of a repository with large binary files, almost all of the time is
spent dealing with blobs. This is extremely inefficient if all we want
to do is rewrite the commits and tree structure. --no-data skips the
output of blobs and writes SHA-1s instead of marks, which provides a
massive speedup.
Signed-off-by: Geoffrey Irving <irving@naml.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is usually better to have positive options, to avoid confusing double
negations. However, sometimes it is desirable to show the negative option
in the help.
Introduce the flag PARSE_OPT_NEGHELP to do that.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To save me from the carpal tunnel syndrome, make 'git stash' accept
the short option '-k' instead of '--keep-index', and for even more
convenience, let's DWIM when this developer forgot to type the 'save'
command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a branch moves A to B while the other branch created B (or moved C to
B), the code tried to rename one of them to B~something to preserve both
versions, and failed to register temporary resolution for the original
path B at stage#0 during virtual ancestor computation. This left the
index in unmerged state and caused a segfault.
A better solution is to merge these two versions of B's in place and use
the (potentially conflicting) result as the intermediate merge result in
the virtual ancestor.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the case where an untracked symlink that points at a directory
with tracked paths confuses the checkout logic, demostrated in t6035.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
longest_path_match() in symlinks.c does exactly what it's name says,
but in some cases that match can be too long, since the
has_*_leading_path() functions assumes that the match will newer be as
long as the name string given to the function.
fix this by adding an extra if test which checks if the match length
is equal to the 'len' parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test creates two directories, a/b and a/b-2, then replaces a/b with
a symlink to a/b-2, then merges that change into the 'baseline' commit,
which contains an unrelated change.
There are two bugs:
1. 'git checkout' incorrectly deletes work tree file a/b-2/d.
2. 'git merge' incorrectly deletes work tree file a/b-2/d.
The test goes on to create another branch in which a/b-2 is replaced
with a symlink to a/b (i.e., the reverse of what was done the first
time), and merge it into the 'baseline' commit.
There is a different bug:
3. The merge should be clean, but git reports a conflict.
Signed-off-by: James Pickens <james.e.pickens@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have an embedded git work tree in your work tree (be it
an orphaned submodule, or an independent checkout of an unrelated
project), "git clean -d -f" blindly descended into it and removed
everything. This is rarely what the user wants.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow git request-pull to append diff body into the pull request.
It's useful for small series of commits.
Tested-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* hv/cvsps-tests:
t/t9600: remove exit after test_done
cvsimport: extend testcase about patchset order to contain branches
cvsimport: add test illustrating a bug in cvsps
Add a test of "git cvsimport"'s handling of tags and branches
Add some tests of git-cvsimport's handling of vendor branches
Test contents of entire cvsimported "master" tree contents
Use CVS's -f option if available (ignore user's ~/.cvsrc file)
Start a library for cvsimport-related tests
The problem is that if a file was replaced with a directory containing
another file with the same content and mode, an attempt to merge it
with a branch descended from a commit before this F->D transition will
cause merge-recursive to break. It breaks even if there were no
conflicting changes on that other branch.
Originally reported by Anders Melchiorsen.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next major release will be 1.6.5, hopefully with a shorter cycle
than the 1.6.4 cycle. After that in 1.7.0 we can make potentially
backward incompatible changes if necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the description of "--ignore-errors" from git-add.txt as
inspiration.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The location to pull from should be converted from the configured nickname
to URL in the message, but ls-remote should be fed the nickname so that
the command uses remote.$nickname.* variables, most notably "uploadpack".
Signed-off-by: Tom Grennan <tgrennan@redback.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This includes mentioning the initial hash output of diff-tree, and
changes the header to "raw output format" which is more descriptive.
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the less ambiguous
"set variable foo in order to enable bar"
rather than
"set variable foo to enable bar" which may trick users into
assuming that "enable" is a good value for "foo".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git svn gc" will not compress unhandled.log files if
Compress::Zlib is missing. However, leftover index files should
always be removed, so add a test for this behavior as well.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bodo Schlecht noticed that Instaweb didn't propely quote all
path instances in the Apache config file it generated.
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* en/fast-export:
fast-export: Document the fact that git-rev-list arguments are accepted
Add new fast-export testcases
fast-export: Add a --tag-of-filtered-object option for newly dangling tags
fast-export: Do parent rewriting to avoid dropping relevant commits
fast-export: Make sure we show actual ref names instead of "(null)"
fast-export: Omit tags that tag trees
fast-export: Set revs.topo_order before calling setup_revisions
* git://git.bogomips.org/git-svn:
git svn: make minimize URL more reliable over http(s)
git svn: avoid escaping '/' when renaming/copying files
t9142: stop httpd after the test
git svn: the branch command no longer needs the full path
git svn: revert default behavior for --minimize-url
git svn: add gc command
In addition to path-based restrictions, Subversion servers over
http(s) may have access controls implemented via the LimitExcept
directive in Apache. In some cases, LimitExcept may be
(arguably) misconfigured to not allow REPORT requests while
allowing OPTIONS and PROPFIND.
This caused problems with our existing minimize_url logic that
only issued OPTIONS and PROPFIND requests when connecting and
using SVN::Ra::get_latest_revnum. We now call SVN::Ra::get_log
if get_latest_revnum succeeds, resulting in a REPORT request
being sent. This will increase our chances of tripping access
controls before we start attempting to fetch history.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
asciidoc 8.4.1 changed the semantics of inline backtick quoting so
that they disable parsing of inline constructs, i.e.,
Input: `{plus}`
Pre 8.4.1: +
Post 8.4.1: {plus}
Fix this by defining the asciidoc attribute 'no-inline-literal'
(which, per the 8.4.1 changelog, is the toggle to return to the old
behaviour) when under ASCIIDOC8.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Timothy Schaeffer reported the following:
> Git-svn has been giving me the following error for some time
> when calling "git svn dcommit":
>
> RA layer request failed: PROPFIND request failed on
> '/svn/stf/branches/dev/sw%2Fdpemu%2Finclude%2FNetCnxn.h': PROPFIND of
> '/svn/stf/branches/dev/sw%2Fdpemu%2Finclude%2FNetCnxn.h': 302 Found
> (https://oursvnrepo.net) at /usr/local/libexec/git-core/git-svn line 508
>
> This only occurred when git detected a rename or copy.
>
> Following the lead into git-svn.perl,
> and noticing that some of the '/'s in the path were hex-encoded
> and some were not,
> I changed the regex used to find chars
> to hex-encode in the relative part of the path
> to exclude '/'.
> It works, so far.
> I have included a patch.
While this has previous not been a problem in my experience,
newer versions of SVN may be stricter and this does not
introduce regressions in t9115.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This was introduced in 0b2af457a4
("Fix branch detection when repository root is inaccessible")
but reintroduced in the previous commit.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This reverts the --minimize-url behavior change that
appeared recently in commit 0b2af457a4
("Fix branch detection when repository root is inaccessible").
However, we now allow the option to be turned off by allowing
"--no-minimize-url" so people with limited-access setups can
still take advantage of the fix in
0b2af457a4.
Also document the behavior and default settings of minimize-url
in the manpage for the first time.
This introduces a temporary UI regression to allow t9141 to pass
that will be reverted (fixed) in the next commit.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Add a git svn gc command that gzips all unhandled.log files, and
removes all index files under .git/svn.
Signed-off-by: Robert Allan Zeh <robert.a.zeh@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
When starting a new repository, I see my students often say
% git init newrepo
and curse git. They could say
% mkdir newrepo; cd newrepo; git init
but allowing it as an obvious short-cut may be nicer.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The second and third tests of this script expected that Russian strings
are converted between ISO-8859-5 and Shift_JIS in the "blame --porcelain"
format output correctly.
Sure, many platforms may convert between such a combination, but that is
only because one of the base character set of Shift_JIS, JIS X 0208,
defines codepoints for Russian characters (among others); I do not think
anybody uses Shift_JIS when seriously writing Russian, and it is perfectly
understandable if iconv() libraries on some platforms fail converting
between this combination, as it does not matter in reality.
This patch changes the test to verify Japanese strings are converted
correctly between EUC-JP and Shift_JIS in the same procedure. The point
of the test is not about verifying the platform's iconv() library, but to
see if "git blame" makes correct iconv() library calls when it should.
We could instead use ISO-8859-5 and KOI8-R as the combination, because
they are both meant to represent Russian, in order to make this test
meaningful on more platforms, but we already use Shift_JIS vs EUC-JP
combinations to test other programs in our test suite, so this combination
is safer from the point of view of the portability. Besides, I do not
read nor write Russian; sorry ;-)
This change allows tests to pass on my (friend's) Solaris 5.11 box.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using "light2" and "dark2" for class names in 'blame' view
(in place of "light" and "dark" classes in other places) to avoid
changing style on hover in 'blame' view while doing it for other views
(like 'shortlog'), use more advanced CSS, relying on the fact that
more specific selector wins.
While at it add a few comments to gitweb CSS file, and consolidate
some repeated info.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example for "Junio C Hamano" initials would be "JH". Of course
initials are added (below shortened SHA-1 of blamed commit) only if
group of lines that blame the same commit has 2 or more lines in it.
Initials are extracted using i18n /\b([[:upper:]])\B/g regexp.
Additionally initials help to distinguish boundary commits, as they
use bold weight font too (in addition to shortened SHA-1 of commit).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "no-previous" class to mark blamed commits which do not have
"previous" header. Those are commits in which blamed file was created
(added); this includes boundary commits. This means that 'linenr'
link leads to blamed commit, not (one of) parent of blamed commit.
Therefore currently line number for such commit uses bold weight font
to denote this situation; the effect is subtle.
Use "multiple-previous" class in the opposite situation, where blamed
commit has multiple "previous" headers (is an evil merge). Currently
this class is not used for styling. In this situation 'linenr' link
leads to first of "previous" commits (first parent).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Luben Tuikov changed 'lineno' link (line number link) from pointing to
'blame' view at given line at blamed commit, to the one at parent of
blamed commit in
244a70e (Blame "linenr" link jumps to previous state at
"orig_lineno", 2007-01-04).
This made it possible to do data mining using 'blame' view, by going
through history of a line using mentioned line number link.
Original implementation called "git rev-parse <commit>^" to find SHA-1
of a parent of a given commit once per each blamed line. In
39c19ce (gitweb: cache $parent_commit info in git_blame(),
2008-12-11)
this was improved so rev-parse was called once per each unique commit
in git-blame output. Alternate solution would be to relax validation
for 'hb' parameter by allowing extended SHA-1 syntax of the form
<rev>^ (perhaps redirecting to gitweb URL with <rev>^ resolved, in
practice moving call to rev-parse to 'the other side of link').
This solution had a bug that it didn't work for boundary commits.
Boundary commits don't have parents, so "git rev-parse <commit>^"
returned literal "<commit>^" (which didn't exists). Gitweb didn't
detect this situation and passed this result literally as 'hb'
parameter in 'linenr' link. Following such link currently gives
400 - Invalid hash base parameter
error; 'hb' parameter is restricted via validate_refname to correct
refnames and doesn't allow for extended SHA-1 syntax. This bug could
have been fixed alternatively by checking if commit is boundary commit,
or check if rev-parse result is unchanged (still ends in '^' prefix).
The solution employing rev-parse to find parent of commit had inherent
problem if blamed commit renamed file; then name of file would be
different in its parent. Solving this outside git-blame would be
difficult and costly (at least cost of additional fork for extra git
command).
Currently gitweb uses information in "previous" header, which was
introduced by Junio C Hamano in
96e1170 (blame: show "previous" information in
--porcelain/--incremental format, 2008-06-04)
This (currently undocumented) header has the following format:
"previous <sha1 of parent commit> <filename at parent>"
Using "previous" header solves both problem of performance and the
problem that blamed commit could have renaming blamed file.
Because "previous" header can be repeated for the same commit when
blamed commit is merge (has more than one parent), and we are
interested usually in _first_ parent, currently we store only first
value if blame header repeats. Using first parent (first "previous"
line) was what gitweb did before; without this change gitweb would use
last parent instead.
If there is no previous commit 'linenr' link points to blamed commit
and blamed filename, making it work correctly for boundary commits.
Acked-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "boundary" class to mark boundary commits, which currently results
in using bold weight font for SHA-1 of a commit (to be more exact for
all text in the first cell in row, that contains SHA-1 of a commit).
Detecting boundary commits is done by watching for "boundary" header
in "git blame -p" output. Because this header doesn't carry
additional data the regular expression for blame header fields
had to be slightly adjusted.
With current gitweb API only root (parentless) commits can be boundary
commits.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Style for td.error was introduced in 1f1ab5f (gitweb: style done with
stylesheet, 2006-06-20) to replace inline style for errors in old
multi-column "git annotate" based 'blame' view. This view was then
since removed (replaced by "git-blame" based 'blame' view, with fewer
colums), making this style unused.
Make this style more generic by replacing td.error with .error to make
it apply to any element. It will be used in 'blame_incremental' view
to show error messages.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
735c674 (Trailing whitespace and no newline fix, 2009-07-22) completely
broke --whitespace=fix, causing it to lose all the empty lines in a patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-graft-unhide-true-parents:
git repack: keep commits hidden by a graft
Add a test showing that 'git repack' throws away grafted-away parents
Conflicts:
git-repack.sh
* av/maint-config-reader:
After renaming a section, print any trailing variable definitions
Make section_name_match start on '[', and return the length on success
With the previous code, an alias cycle like:
$ echo 'alias a b' >aliases
$ echo 'alias b a' >aliases
$ git config sendemail.aliasesfile aliases
$ git config sendemail.aliasfiletype mutt
would put send-email into an infinite loop. This patch
detects the situation and complains to the user.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Added the envvar GIT_PS1_SHOWUNTRACKEDFILES to 'git-completion.bash'.
When set to a nonempty value, then the char '%' will be shown next
to the branch name in the bash prompt.
Signed-off-by: Daniel Trstenjak <daniel.trstenjak@science-computing.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
SunOS grep does not understand -C<n> nor -e
Fix export_marks() error handling.
git branch: clean up detached branch handling
git branch: avoid unnecessary object lookups
git branch: fix performance problem
do_one_ref(): null_sha1 check is not about broken ref
Conflicts:
Makefile
The first "grep -C1" test in t7002 does not pass on my SunOS-5.11-i86pc,
and that is not because our way to spawn external grep is broken, but
because the native grep does not understand -C<n>.
It turns out that Peff was also using this option himself because our
Makefile doesn't do that automatically. Brandon Casey uses SUNWspro
compiler without having to set this, and it turns out that the compiler
does not define preprocessor macro __unix__ which made him always use the
built-in grep, never an external one.
Let's be more explicit and say that we do not use external grep on Suns.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Don't leak one FILE * on error per export_marks() call. Found with
cppcheck and reported by Martin Ettl.
- Abort the potentially long for(;idnums.size;) loop on write errors.
- Record error if fprintf() fails for reasons not required to set the
stream error indicator, such as ENOMEM.
- Add a trailing full-stop to error message when fopen() fails.
Signed-off-by: Matthias Andree <matthias.andree@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have grafts that pretend that a given commit has different
parents than the ones recorded in the commit object, it is dangerous
to let 'git repack' remove those hidden parents, as you can easily
remove the graft and end up with a broken repository.
So let's play it safe and keep those parent objects and everything
that is reachable by them, in addition to the grafted parents.
As this behavior can only be triggered by git pack-objects, and as that
command handles duplicate parents gracefully, we do not bother to cull
duplicated parents that may result by using both true and grafted
parents.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the 'show detached branch info' a routine of its own. And in the
process, avoid the object lookup that is unnecessary if the current
branch isn't detached.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They can be expensive in the cold-cache case, so don't bother looking up
the commits for all branches unless we really need them for some reason.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git branch' looks at _all_ the refs, and verifies them. Which means that
during cold-cache situations with a slow disk (and lots of tags, for
example) it can take several very annoying seconds (7.5s according to a
report by Carlos R. Mafra).
This avoids most of it by simply doing the filtering before looking up
the commits, by using the "raw" version of for_each_ref.
Reported-by: Carlos R. Mafra <crmafra2@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thanks to Ka-Hing Cheung for the initial bug report and patch:
> git-svn uses $ra->get_latest_revnum to find out the latest
> revision, but that can be problematic, because get_latest_revnum
> returns the latest revnum in the entire repository, not
> restricted by whatever URL you used to construct $ra. So if you
> do git svn clone -r HEAD svn://blah/blah/trunk, it won't work if
> the latest checkin is in one of the branches (it will try to
> fetch a rev that doesn't exist in trunk, making the clone
> useless).
Relying on SVN::Core::INVALID_REVNUM (-1) as the "start"
argument to SVN::Ra::get_log() proved unreliable with http(s)
URLs so the result of SVN::Ra::get_latest_revnum() is used as
the "start" argument instead.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
f8948e2 (remote prune: warn dangling symrefs, 2009-02-08) introduced a
more dangerous variant of for_each_ref() family that skips the check for
dangling refs, but it also made another unrelated check optional by
mistake.
The check to see if a ref points at 0{40} is not about brokenness, but is
about a possible future plan to represent a deleted ref by writing 40 "0"
in a loose ref when there is a stale version of the same ref already in
.git/packed-refs, so that we can implement deletion of a ref without
having to rewrite the packed refs file excluding the ref being deleted.
This check has to live outside of the conditional.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The empty assignment NEEDS_SSL_WITH_CRYPTO= was mistakenly paired with the
assignment NEEDS_SSL_WITH_CRYPTO=YesPlease in the "action-if-found"
parameter of the AC_CHECK_LIB macro. The empty assignment was intended for
the "action-if-not-found" section, since in that case, the necessary sha1
hash function was not found and the internal sha1 implementation will be
used instead.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brought to you thanks to coccinelle:
---8<----
@@
expression *E;
@@
(
E ==
- 0
+ NULL
|
E !=
- 0
+ NULL
|
E =
- 0
+ NULL
)
@@
identifier f;
type T;
@@
T *f(...) {
<...
- return 0;
+ return NULL;
...>
}
--->8----
There are a lot more hits in compat/nedmallox and compat/regex but these
are borrowed code we rather do not want to maintain our own forks for,
and this patch refrains from touching them.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This hopefully makes the relationship between threading options of
format-patch and send-email easier to grasp.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also mention deprecated aliases that do not appear in the send-email
manpage.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "action" parameters for these two tests were supplied incorrectly for
the way the tests were implemented. The tests check whether a program
which calls hstrerror() or basename() successfully links when -lresolv or
-lgen are used, respectively. A successful linking would result in
NEEDS_RESOLV or NEEDS_LIBGEN being unset, and failure would result in
setting the respective variable.
Aside from that issue, the tests did not handle the case where neither
library was necessary for accessing the functions in question. So solve
both of these issues by re-working the two tests so that their form is like
the NEEDS_SOCKET test which attempts to link with just the c library, and
if it fails then assumes that the additional library is necessary and sets
the appropriate variable.
Also an entry in the config.mak.in file is necessary for the NEEDS_LIBGEN
variable to appear in the config.mak.autogen file with the value assigned
by the configure script. Without it, the generated shell script would
contain a snippet like this:
for ac_lib in ; do
...
which is incorrect.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Trailing whitespace and no newline fix
diff --cc: a lost line at the beginning of the file is shown incorrectly
combine-diff.c: fix performance problem when folding common deleted lines
It is useful to grep directories non-recursively, e.g. when one wants to
look for all files in the toplevel directory, but not in any subdirectory,
or in Documentation/, but not in Documentation/technical/.
This patch adds support for --max-depth <depth> option to git-grep. If it is
given, git-grep descends at most <depth> levels of directories below paths
specified on the command line.
Note that if path specified on command line contains wildcards, this option
makes no sense, e.g.
$ git grep -l --max-depth 0 GNU -- 'contrib/*'
(note the quotes) will search all files in contrib/, even in
subdirectories, because '*' matches all files.
Documentation updates, bash-completion and simple test cases are also
provided.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a patch adds a new line to the end of a file and this line ends with
one trailing whitespace character and has no newline, then
'--whitespace=fix' currently does not remove that trailing whitespace.
This patch fixes this by removing the check for trailing whitespace at
the end of the line at a hardcoded offset which does not take the
eventual absence of newline into account.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When combine-diff inspected the diff from one parent to the merge result,
it misinterpreted a header in the form @@ -l,k +0,0 @@.
This hunk header means that K lines were removed from the beginning of the
file, so the lost lines must be queued to the sline that represents the
first line of the merge result, but we incremented our pointer incorrectly
and ended up queuing it to the second line, which in turn made the lossage
appear _after_ the first line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a deleted line in a patch with the parent we are looking at, the
append_lost() function finds the same line among a run of lines that were
deleted from the same location by patches from parents we previously
checked. This is so that patches with two parents
@@ -1,4 +1,3 @@ @@ -1,4 +1,3 @@
one one
-two -two
three three
-quatro -fyra
+four +four
can be coalesced into this sequence, reusing one line that describes the
removal of "two" for both parents.
@@@ -1,4 -1,4 +1,3 @@@
one
--two
three
- quatro
-frya
++four
While reading the second patch (that removes "two" and then "fyra"), after
finding where removal of the "two" matches, we need to find existing
removal of "fyra" (if exists) in the removal list, but the match has to
happen after all the existing matches (in this case "two"). The code used
a naïve O(n^2) algorithm to compute this by scanning the whole removal
list over and over again.
This patch remembers where the next scan should be started in the existing
removal list to avoid this.
Noticed by Linus Torvalds.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a rebase with --onto, the correct test for whether we can skip
rewriting a commit is if it is already on top of $ONTO, not $UPSTREAM.
Without --onto, this distinction does not exist and the behavior does
not change.
In a situation with two merged branches on a common base X:
X---o---o---o---M
\ /
x---x---x---x
Y
if we try to move the branches from their base on X to be based on Y,
so as to get
X
Y---o'--o'--o'--M'
\ /
x'--x'--x'--x'
then we fail. The command `git rebase -p --onto Y X M` moves only the
first-parent chain, like so:
X
\
x---x---x---x
\
Y---o'--o'--o'--M'
because it mistakenly drops the other branch(es) x---x---x---x from
the TODO file. This tests and fixes this behavior.
Signed-off-by: Greg Price <price@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mishandling of http(s) in need of escaping was causing
t9118-git-svn-funky-branch-names to fail when SVN_HTTPD_PORT
was defined.
This bug was exposed in (but not caused by)
commit 0b2af457a4
(Fix branch detection when repository root is inaccessible)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Some unrelated tests were developed simultaneously and resulted
in test numbers conflicting. To avoid difficulty when referring
to tests via the "tXXXX" convention, rename the newer tests.
Suggested by Marc Branchaud.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
When showing an annotated tag, "git show" will always
display the pointed-to object. However, it didn't separate
the two with whitespace, making it more difficult to notice
where the new object started. For example:
$ git tag -m 'my message' foo
$ git show foo
tag foo
Tagger: Jeff King <peff@peff.net>
Date: Fri Jul 17 18:46:25 2009 -0400
my message
commit 41cabf8fed2694ba33e01d64f9094f2fc5e5805a
Author: Jeff King <peff@peff.net>
Date: Thu Jul 16 17:31:34 2009 -0400
...
This patch respects and sets the rev.shown_one member to
prepend a blank line before showing a second item. We use
this member of rev_info instead of a local flag, because the
log_tree_commit we call into for showing commits already
respects and sets that flag. Meaning that everything will be
spaced properly if you intermix commits and tags, like:
$ git show v1.6.3 v1.6.2 HEAD
In that case, a single blank line will separate the first
tag, the commit it points to, the second tag, the commit
that one points to, and the final commit.
While we're at it, let's also support trees, so that even
something as crazy as
$ git show HEAD^{tree} HEAD~1^{tree} HEAD
will also be spaced in an easy-to-read way. However, we
intentionally do _not_ insert blank lines for blobs, so
that specifying multiple blobs gives a strict concatenation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When showing a tag, our header parsing finishes with the
offset pointing to the newline separating the tag header
from the tag body. This means that the printed body will
always start with a newline.
However, we also add an extra newline when printing the
tagger information. This leads to an ugly double-newline:
$ git show v1.6.3
tag v1.6.3
Tagger: Junio C Hamano <gitster@pobox.com>
Date: Wed May 6 18:16:47 2009 -0700
GIT 1.6.3
-----BEGIN PGP SIGNATURE-----
...
This patch removes the extra newline from the end of the
tagger headers. This is a better solution than suppressing
the separator newline, because it retains the behavior for
tags which have no tagger. E.g., "git show v0.99" will
continue to look like:
$ git show v0.99
tag v0.99
Test-release for wider distribution.
...
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You cannot do a "git pull --rebase" with a rebased upstream, if you have
already run "git fetch". Try to behave as if the "git fetch" was not run.
In other words, find the fork point of the current branch, where
the tip of upstream branch used to be, and use it as the upstream
parameter of "git rebase".
This patch computes the fork point by walking the reflog to find the first
commit which is an ancestor of the current branch. Maybe there are
smarter ways to compute it, but this is a straight forward implementation.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If your upstream has rebased you can do:
git pull --rebase
but only if you haven't fetch before.
Mark this case as test_expect_failure, in a later patch it will be
changed to test_expect_success.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the message said "we will be changing the default in the future, so
this is to warn people who want to keep the current default what to do",
it would have made some sense, but as it stands, the message is merely an
unsolicited advertisement for a new feature, which it is not helpful at
all. Squelch it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git log --no-walk' sorts commits by commit time whereas 'git show' does
not (it leaves them as given on the command line). Document this by two
tests so that we never forget why ba1d450 (Tentative built-in "git
show", 2006-04-15) introduced it and 8e64006 (Teach revision machinery
about --no-walk, 2007-07-24) exposed it as an option argument.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reorder tests introduced in fef3a7cc and 54d5cc0e so an intermittent but
unimportant failure on the CVS side related to the former does not interfere
with what is actually being tested.
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Tested-by: Tommy Nordgren <tommy.nordgren@comhem.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we switch branches with "checkout -f", unpack_trees() feeds two
cache_entries to oneway_merge() function in its src[] array argument. The
zeroth entry comes from the current index, and the first entry represents
what the merge result should be, taken from the tree recorded in the
commit we are switching to.
When we have a blob (either regular file or a symlink) in the index and in
the work tree at path "foo", and the switched-to tree has "foo/bar",
i.e. "foo" becomes a directory, src[0] is obviously that blob currently
registered at "foo". Even though we do not have anything at "foo" in the
switched-to tree, src[1] is _not_ NULL in this case.
The unpack_trees() machinery places a special marker df_conflict_entry
to signal that no blob exists at "foo", but it will become a directory
that may have somthing underneath it (namely "foo/bar"), so a usual 3-way
merge can notice the situation.
But oneway_merge() codepath failed to notice this and passed the special
marker directly to merged_entry(). This happens to remove the "foo" in
the end because the df_conflict_entry does not have any name (hence the
"error" message) and its addition in add_index_entry() is rejected, but it
is wrong.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
When we fall back to a standard for_each_reflog_ent() after failing to find
the nth branch switch (or if we had a short reflog) with the call to
for_each_recent_reflog_ent(), we do not need to free the memory allocated
for our strbuf's since a strbuf_reset() will be performed in
grab_nth_branch_switch() before assigning to the entry.
Plus, the strbuf_release() negates the non-zero hint we initially gave to
strbuf_init() just above these lines.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 650d30d8a1.
Some mailing lists are configured add prefix "[listname] " to all their
messages, and also people hand-edit subject lines, be it an output from
format-patch or a patch generated by some other means.
We cannot stop people from mucking with the subject line, and with the
change, there always will be need for hand editing the subject when that
happens. People have depended on the leading [bracketed string] removal.
In our 'oneway_merge()' we always do an 'lstat()' to see if we might
need to mark the entry for updating.
But we really shouldn't need to do that when the cache entry is already
marked as being ce_uptodate(), and this makes us do unnecessary lstat()
calls if we have index preloading enabled.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not that anybody should ever get it, but somebody did (probably because
of a flaky filesystem, but whatever). And each time I see an error
message that I haven't seen before, I decide that next time it will look
better.
So this makes us write more relevant information about exactly which
file ended up having issues with a missing object. Which will tell
whether it was a tree object, for example, or just a regular file in the
index (and which one).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For some reason, I ended up doing
git show HEAD~5..
as an odd way of asking for a log. I realize I should just have used "git
log", but at the same time it does make perfect conceptual sense. After
all, you _could_ have done
git show HEAD HEAD~1 HEAD~2 HEAD~3 HEAD~4
and saying "git show HEAD~5.." is pretty natural. It's not like "git show"
only ever showed a single commit (or other object) before either! So
conceptually, giving a commit range is a very sensible operation, even
though you'd traditionally have used "git log" for that.
However, doing that currently results in an error
fatal: object ranges do not make sense when not walking revisions
which admittedly _also_ makes perfect sense - from an internal git
implementation standpoint in 'revision.c'.
However, I think that asking to show a range makes sense to a user, while
saying "object ranges no not make sense when not walking revisions" only
makes sense to a git developer.
So on the whole, of the two different "makes perfect sense" behaviors, I
think I originally picked the wrong one. And quite frankly, I don't really
see anybody actually _depending_ on that error case. So why not change it?
So rather than error out, just turn that non-walking error case into a
"silently turn on walking" instead.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
... so it's available for git log, shortlog and gitk.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-scm.com is now the "official" Git project page, having taken over
from git.or.cz, so update the default link accordingly. This saves a
redirect when people hit git.or.cz.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SVN allows uppercase A-F characters in repositories. Although
`svnadmin' does not create UUIDs with uppercase by default, it
is possible to change the UUID of a SVN repository and SVN
itself will make no attempt to normalize them.
Thanks to Esben Skovenborg for discovering this issue.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
For the case of multiple projects sharing a single SVN repository, it is
common practice to create the standard SVN directory layout within a
subdirectory for each project. In such setups, access control is often
used to limit what projects a given user may access. git-svn failed to
detect branches (e.g. when passing --stdlayout to clone) because it
relied on having access to the root directory in the repository. This
patch solves this problem by making git-svn use paths relative to the
given repository URL instead of the repository root.
Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
This makes get_log more safe to use because callers cannot run into path
clobbering any more. The additional overhead will not affect performance
since the critical calls from the fetch loop need the path duplication
anyway and the rest of the call sites is not performance critical.
Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
Unified context patch generated by GNU diff has UNIX epoch timestamp
on the side that does not exist when the patch is about a creation or
a deletion event. Notice this convention when reading a non-git diff.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add long options for dry run and quiet to be more consistent with the
rest of git.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPT__VERBOSE introduces the long option (--verbose) in addition to the
already present short option (-v), so document this new addition.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A check for extra options has been dropped, it could never be triggered
in the original code as the usage message would be printed instead.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
quickfetch() calls rev-list to check whether the objects we are about to
fetch are already present in the repo (if so, we can skip the object fetch).
However, when there are many (~1000) refs to be fetched, the rev-list
command line grows larger than the maximum command line size on some systems
(32K in Windows). This causes rev-list to fail, making quickfetch() return
non-zero, which unnecessarily triggers the transport machinery. This somehow
causes fetch to fail with an exit code.
By using the --stdin option to rev-list (and feeding the object list to its
standard input), we prevent the overflow of the rev-list command line,
which causes quickfetch(), and subsequently the overall fetch, to succeed.
However, using rev-list --stdin is not entirely straightforward: rev-list
terminates immediately when encountering an unknown object, which can
trigger SIGPIPE if we are still writing object's to its standard input.
We therefore temporarily ignore SIGPIPE so that the fetch process is not
terminated.
The patch also contains a testcase to verify the fix (note that before
the patch, the testcase would only fail on msysGit).
Signed-off-by: Johan Herland <johan@herland.net>
Improved-by: Johannes Sixt <j6t@kdbg.org>
Improved-by: Alex Riesen <raa.lkml@gmail.com>
Tested-by: Peter Krefting <peter@softwolves.pp.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 003b33a8 recently added a call to basename(). On IRIX 6.5, this
function resides in libgen and -lgen is required for the linker.
Update configure.ac too.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't define _XOPEN_SOURCE
Do define _SGI_SOURCE
Defining _XOPEN_SOURCE prevents many of the common functions and macros
from being defined. _Not_ setting _XOPEN_SOURCE, and instead setting
_SGI_SOURCE, provides all of the XPG4, XPG5, BSD, POSIX functions and
declarations, _BUT_ provides a horribly broken snprintf(). SGI does have
a working snprintf(), but it is only provided when _NO_XOPEN5 evaluates
to zero, and this only happens if _XOPEN_SOURCE is defined which, as
mentioned above, prevents many other common functions and defines.
The broken snprintf will be worked around with SNPRINTF_RETURNS_BOGUS in
the Makefile in a later patch.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The c99 MIPSpro Compiler version 7.4.4m on IRIX 6.5 does not properly
initialize run-time initialized arrays. An array which is initialized with
fewer elements than the length of the array should have the unitialized
elements initialized to zero. This compiler only initializes the remaining
elements when the last element is a static parameter. So work around it
by adding a "NULL" initialization parameter.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/dir-cleanup:
Make index preloading check the whole path to the file
Export thread-safe version of 'has_symlink_leading_path()'
Prepare symlink caching for thread-safety
Avoid using 'lstat()' to figure out directories
Avoid doing extra 'lstat()'s for d_type if we have an up-to-date cache entry
Simplify read_directory[_recursive]() arguments
Add 'fill_directory()' helper function for directory traversal
For some reason there still are people who use the old style layout
to put everything in $(bindir). The previous commit breaks the install
for them, because it tries to unconditionally remove git from execdir
and cp/ln from bindir --- oops.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses the new thread-safe 'threaded_has_symlink_leading_path()'
function to efficiently verify that the whole path leading up to the
filename is a proper path, and does not contain symlinks.
This makes 'ce_uptodate()' a much stronger guarantee: it no longer just
guarantees that the 'lstat()' of the path would match, it also means
that we know that people haven't played games with moving directories
around and covered it up with symlinks.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The threaded index preloading will want it, so that it can avoid
locking by simply using a per-thread symlink/directory cache.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This doesn't actually change the external interfaces, so they are still
thread-unsafe, but it makes the code internally pass a pointer to a
local 'struct cache_def' around, so that the core code can be made
thread-safe.
The threaded index preloading will want to verify that the paths leading
up to a pathname are all real directories.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we have an up-to-date index entry for a file in that directory, we
can know that the directories leading up to that file must be
directories. No need to do an lstat() on the directory.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a git command executes a subcommand, it uses the "git
foo" form, which relies on finding "git" in the PATH.
Normally this should not be a problem, since the same "git"
that was used to invoke git in the first place will be
found. And if somebody invokes a "git" outside of the PATH
(e.g., by giving its absolute path), this case is already
covered: we put that absolute path onto the front of PATH.
However, if one is using "sudo", then sudo will execute the
"git" from the PATH, but pass along a restricted PATH that
may not contain the original "git" directory. In this case,
executing a subcommand will fail.
To solve this, we put the "git" wrapper itself into the
execdir; this directory is prepended to the PATH when git
starts, so the wrapper will always be found.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On filesystems without d_type, we can look at the cache entry first.
Doing an lstat() can be expensive.
Reported by Dmitry Potapov for Cygwin.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop the insanity with separate 'path' and 'base' arguments that must
match. We don't need that crazy interface any more, since we cleaned up
handling of 'path' in commit da4b3e8c28.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the users of "read_directory()" actually want a much simpler
interface than the whole complex (but rather powerful) one.
In fact 'git add' had already largely abstracted out the core interface
issues into a private "fill_directory()" function that was largely
applicable almost as-is to a number of callers. Yes, 'git add' wants to
do some extra work of its own, specific to the add semantics, but we can
easily split that out, and use the core as a generic function.
This function does exactly that, and now that much simplified
'fill_directory()' function can be shared with a number of callers,
while also ensuring that the rather more complex calling conventions of
read_directory() are used by fewer call-sites.
This also makes the 'common_prefix()' helper function private to dir.c,
since all callers are now in that file.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gb/gitweb-avatar:
gitweb: add empty alt text to avatar img
gitweb: picon avatar provider
gitweb: gravatar url cache
gitweb: (gr)avatar support
gitweb: use git_print_authorship_rows in 'tag' view too
gitweb: uniform author info for commit and commitdiff
gitweb: refactor author name insertion
* rs/grep-p:
grep: simplify -p output
grep -p: support user defined regular expressions
grep: add option -p/--show-function
grep: handle pre context lines on demand
grep: print context hunk marks between files
grep: move context hunk mark handling into show_line()
userdiff: add xdiff_clear_find_func()
git-format-patch prepends patches with a [PATCH x/n] prefix, but
mailinfo used to remove any number of square-bracket pairs and
the content between them. This prevents one from using a commit
subject like this:
[ and ] must be allowed as input
Removing the square bracket pair from this rather clumsily
constructed subject line loses important information, so we must
take care not to.
This patch causes the subject stripping to stop after it has
encountered one pair of square brackets.
One possible downside of this patch is that the patch-handling
programs will now fail at removing author-added square-brackets
to be removed, such as
[RFC][PATCH x/n]
However, since format-patch only adds one set of square brackets,
this behaviour is quite easily undesrstood and defended while the
previous behaviour is not.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- correctly link paragraphs within list items
- consistently format examples
- put option alernatives on separate lines
- always use [verse] for config items
- always indent 1st paragraph of a list item, with a tab
Signed-off-by: Yann Dirson <ydirson@altern.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also consistently use single quotes around git commands to make things clear
(was only needed at a couple of places).
Signed-off-by: Yann Dirson <ydirson@altern.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aliases that invoke shell commands start from the top-level directory,
but this was not documented.
Signed-off-by: Sitaram Chamarty <sitaramc@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0065236 (bash completion: complete variable names for "git
config" with options 2009-05-08) implemented its config variable search
wrong. When a config contains a value with a space and a period (.) in
it, completion erroneously thinks that line in the configuration is
multiple config variables.
For example
$ cat .git/config
format.cc = Junio C Hamano <gitster@pobox.com>
$ git config --unset <TAB>
format.cc
<gitster@pobox.com>
Instead of using a for loop splitting across spaces, pipe each line to a
while read loop and beef up the case statement to match only
'config.variable=value'.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/die_errno:
Use die_errno() instead of die() when checking syscalls
Convert existing die(..., strerror(errno)) to die_errno()
die_errno(): double % in strerror() output just in case
Introduce die_errno() that appends strerror(errno) to die()
It is common practice to use the Unix epoch as a fallback date
when a suitable date is not available. This is true of git svn
and possibly other importing tools that import non-git history
into git.
Instead of clobbering established strtoul() error reporting
semantics with our own, preserve the strtoul() error value
of ULONG_MAX for fsck.c to handle.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xml_entities() in http-push.c did not properly stop at the end of the
string being examined, which would occasionally cause nonsense to be
appended to escaped URL strings and result in failed DAV XML queries
Signed-off-by: Seth Hunter <hunter@ll.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function run_status was used to report failures after a hook was run.
By now, the only thing that the function itself reported was the exit code
of the hook (if it was non-zero). But this is redundant because it can be
expected that the hook itself will have reported a suitable error.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case where a program was not found, it was still the task of the
caller to report an error to the user. Usually, this is an interesting case
but only few callers actually reported a specific error (though many call
sites report a generic error message regardless of the cause).
With this change the error is reported by run_command, but since there is
one call site in git.c that does not want that, an option is added to
struct child_process, which is used to turn the error off.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We now write the signal number in the error message if the program
terminated by a signal. The negative return value is constructed such that
after truncation to 8 bits it looks like a POSIX shell's $?:
$ echo 0000 | { git upload-pack .; echo $? >&2; } | :
error: git-upload-pack died of signal 13
141
Previously, the exit code was 255 instead of 141.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The motivation for this change is that system call failures are serious
errors that should be reported to the user, but only few callers took the
burden to decode the error codes that the functions returned into error
messages.
If at all, then only an unspecific error message was given. A prominent
example is this:
$ git upload-pack . | :
fatal: unable to run 'git-upload-pack'
In this example, git-upload-pack, the external command invoked through the
git wrapper, dies due to SIGPIPE, but the git wrapper does not bother to
report the real cause. In fact, this very error message is copied to the
syslog if git-daemon's client aborts the connection early.
With this change, system call failures are reported immediately after the
failure and only a generic failure code is returned to the caller. In the
above example the error is now to the point:
$ git upload-pack . | :
error: git-upload-pack died of signal
Note that there is no error report if the invoked program terminated with
a non-zero exit code, because it is reasonable to expect that the invoked
program has already reported an error. (But many run_command call sites
nevertheless write a generic error message.)
There was one special return code that was used to identify the case where
run_command failed because the requested program could not be exec'd. This
special case is now treated like a system call failure with errno set to
ENOENT. No error is reported in this case, because the call site in git.c
expects this as a normal result. Therefore, the callers that carefully
decoded the return value still check for this condition.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a general guideline, functions in git's code return zero to indicate
success and negative values to indicate failure. The run_command family of
functions followed this guideline. But there are actually two different
kinds of failure:
- failures of system calls;
- non-zero exit code of the program that was run.
Usually, a non-zero exit code of the program is a failure and means a
failure to the caller. Except that sometimes it does not. For example, the
exit code of merge programs (e.g. external merge drivers) conveys
information about how the merge failed, and not all exit calls are
actually failures.
Furthermore, the return value of run_command is sometimes used as exit
code by the caller.
This change arranges that the exit code of the program is returned as a
positive value, which can now be regarded as the "result" of the function.
System call failures continue to be reported as negative values.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows does not have signals. At least they cannot be diagnosed by the
parent process; all that the parent process can observe is the exit code.
This also adds a dummy definition of WTERMSIG.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For some reason, MinGW's bash cannot reliably detect failure of the child
process if a negative value is passed to exit(). This fixes it by
truncating the exit code in all calls of exit().
This issue was worked around in run_builtin() of git.c (2488df84 builtin
run_command: do not exit with -1, 2007-11-15). This workaround is no longer
necessary and is reverted.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was found a bit too loud to show == separators between the function
headers.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Put filenames into the conflict markers only when they are different.
Otherwise they are redundant information clutter.
Print the filename explicitely when warning about a binary conflict.
Signed-off-by: Martin Renold <martinxyz@gmx.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/bisect:
Documentation: remove warning saying that "git bisect skip" may slow bisection
bisect: use a PRNG with a bias when skipping away from untestable commits
* js/daemon-log:
receive-pack: do not send error details to the client
upload-pack: squelch progress indicator if client cannot see it
daemon: send stderr of service programs to the syslog
* sb/quiet-porcelains:
stash: teach quiet option
am, rebase: teach quiet option
submodule, repack: migrate to git-sh-setup's say()
git-sh-setup: introduce say() for quiet options
am: suppress apply errors when using 3-way
t4150: test applying with a newline in subject
Respect the userdiff attributes and config settings when looking for
lines with function definitions in git grep -p.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new option -p instructs git grep to print the previous function
definition as a context line, similar to diff -p. Such context lines
are marked with an equal sign instead of a dash. This option
complements the existing context options -A, -B, -C.
Function definitions are detected using the same heuristic that diff
uses. User defined regular expressions are not supported, yet.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out pre context line handling into the new function
show_pre_context() and change the algorithm to rewind by looking for
newline characters and roll forward again, instead of maintaining an
array of line beginnings and ends.
This is slower for hits, but the cost for non-matching lines becomes
zero. Normally, there are far more non-matching lines, so the time
spent in total decreases.
Before this patch (current Linux kernel repo, best of five runs):
$ time git grep --no-ext-grep -B1 memset >/dev/null
real 0m2.134s
user 0m1.932s
sys 0m0.196s
$ time git grep --no-ext-grep -B1000 memset >/dev/null
real 0m12.059s
user 0m11.837s
sys 0m0.224s
The same with this patch:
$ time git grep --no-ext-grep -B1 memset >/dev/null
real 0m2.117s
user 0m1.892s
sys 0m0.228s
$ time git grep --no-ext-grep -B1000 memset >/dev/null
real 0m2.986s
user 0m2.696s
sys 0m0.288s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Print a hunk mark before matches from a new file are shown, in addition
to the current behaviour of printing them if lines have been skipped.
The result is easier to read, as (presumably unrelated) matches from
different files are separated by a hunk mark. GNU grep does the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move last_shown into struct grep_opt, to make it available in
show_line(), and then make the function handle the printing of hunk
marks for context lines in a central place.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xdiff_set_find_func() is used to set user defined regular expressions
for finding function signatures. Add xdiff_clear_find_func(), which
frees the memory allocated by the former, making the API complete.
Also, use the new function in diff.c (the only call site of
xdiff_set_find_func()) to clean up after ourselves.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier 476cc72 (request-pull: really disable pager, 2009-06-30)
tried to use the correct environment variable to disable paging
from multiple calls to "git log" and friends, but there was one
extra call to "git log" that was not covered by the trick.
Move the setting and exporting of GIT_PAGER much earlier in the
script to cover everybody.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This comment mentions the case where use_terminator is set,
but this case is not handled at all by this chunk of code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
attr: plug minor memory leak
request-pull: really disable pager
Makes some cleanup/review in gittutorial
Makefile: git.o depends on library headers
git-submodule documentation: fix foreach example
Free the memory allocated for struct strbuf pathbuf when we're done.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a new argv array from a configured alias and the supplied
command line arguments, the new argv was allocated with one element too
many. Since the first element of the original argv array is skipped when
copying it to the new_argv, the number of elements that are allocated
should be reduced by one. 'count' is the number of elements that new_argv
contains, and *argcp is the number of elements in the original argv array.
So the total allocation (including the terminating NULL entry) for the
new_argv array should be:
count + (*argcp - 1) + 1
Also, the explicit assignment of the NULL terminating entry can be avoided
by just copying it over from the original argv array.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ff06c74 (Improve request-pull to handle non-rebased branches, 2007-05-01)
attempted to disable pager when running subcommands in this script, but
with a wrong variable. If GIT_PAGER is set, it takes precedence over
PAGER.
Noticed by Michal Marek.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following invocations did not work as expected on Windows:
git mv foo\bar dest
git mv foo\ dest
The first command was interpreted as
git mv foo/bar dest/foo/bar
because the Windows style directory separator was not obeyed when the
basename of 'foo\bar' was computed.
The second command failed because the Windows style directory separator was
not removed from the source directory, whereupon the lookup of the
directory in the index failed.
This fixes both issues by using is_dir_sep() and basename().
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update to include branch.*.rebase, remote.*.pushurl, and
add.ignore-errors
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are some different but little cleanup changes to fix some missing
quotes, to fix what seemed to be an unended sentence, to reident a
little paragraph with too large a sentence and fix a branch name that
was referred to twice later by another name.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Backtick and apostrophe are asciidoc markup, so they should be escaped
in order to get the expected result in the rendered manual page.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The empty alt text optimizes screen estate in text-only browsers.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simple implementation of picon that only relies on the indiana.edu
database.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Views which contain many occurrences of the same email address (e.g.
shortlog view) benefit from not having to recalculate the MD5 of the
email address every time.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce avatar support: the feature adds the appropriate img tag next
to author and committer in commit(diff), history, shortlog, log and tag
views. Multiple avatar providers are possible, but only gravatar is
implemented at the moment.
Gravatar support depends on Digest::MD5, which is a core package since
Perl 5.8. If gravatars are activated but Digest::MD5 cannot be found,
the feature will be automatically disabled.
No avatar provider is selected by default, except in the t9500 test.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_tag must be adapted to use the hash keys expected by
git_print_authorship_rows. This is not a problem since git_tag is the
only user of this sub.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Collect all author display code in appropriate functions, making it
easier to extend these functions on the CGI side.
We also move some of the presentation code from hard-coded HTML to CSS,
for easier customization.
A side effect of the refactoring is that now localtime is always
displayed with the 'at night' warning.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I do various statistics on git, and one of the things I look at is merges,
because they are often interesting events to count ("how many merges vs
how much 'real development'" kind of statistics). And you can do it with
some fairly straightforward scripting, ie
git rev-list --parents HEAD |
grep ' .* ' |
git diff-tree --always -s --pretty=oneline --stdin |
less -S
will do it.
But I finally got irritated with the fact that we can skip merges with
'--no-merges', but we can't do the trivial reverse operation.
So this just adds a '--merges' flag that _only_ shows merges. Now you can
do the above with just a
git log --merges --pretty=oneline
which is a lot simpler. It also means that we automatically get a lot of
statistics for free, eg
git shortlog -ns --merges
does exactly what you'd want it to do.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --porcelain is used git-push will produce machine-readable output. The
output status line for each ref will be tab-separated and sent to stdout instead
of stderr. The full symbolic names of the refs will be given. For example
$ git push --dry-run --porcelain master :foobar 2>/dev/null \
| perl -pe 's/\t/ TAB /g'
= TAB refs/heads/master:refs/heads/master TAB [up to date]
- TAB :refs/heads/foobar TAB [deleted]
Signed-off-by: Larry D'Anna <larry@elder-gods.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.bogomips.org/git-svn:
git svn: Doc update for multiple branch and tag paths
git svn: cleanup t9138-multiple-branches
git-svn: Canonicalize svn urls to prevent libsvn assertion
t9138: remove stray dot in test which broke bash
git-svn: convert globs to regexps for branch destinations
git svn: Support multiple branch and tag paths in the svn repository.
Add 'git svn reset' to unwind 'git svn fetch'
git-svn: speed up find_rev_before
Add 'git svn help [cmd]' which works outside a repo.
git-svn: let 'dcommit $rev' work on $rev instead of HEAD
Using the "svn_cmd" wrapper instead of "svn" alone allows tests
to run consistently for users with customized
~/.subversion/configs. Additionally, using subshells via
"(cd ...)" allow cleaner and less error-prone tests to
be written.
[ew: expanded commit message]
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Cleanup the documentation to explicitly state that --exclude-directory
is only meaningful when used with -u. Also make the documentation more
consistent with the usage message printed with read-tree --help-all.
The -m, --prefix, --reset options are performing similar actions
(setting some flags, read_cache_unmerged(), checking for illegal option
combinations). Instead of performing these actions when the options are
parsed, we delay performing them until after parse-opts has finished.
The bit fields in struct unpack_trees_options have been promoted to full
unsigned ints. This is necessary to avoid "foo ? 1 : 0" constructs to
set these fields.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Printing the usage message when encountering bad option combinations is
not very helpful. Instead, die with a message which tells the user
exactly what combination is invalid.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The testcases test the new --tag-of-filtered-object option, the output
when limiting what to export by path, and test behavior when no
exact-ref revision is included (e.g. master~8 present on command line
but not master).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When providing a list of paths to limit what is exported, the object that
a tag points to can be filtered out entirely. This new switch allows
the user to specify what should happen to the tag in such a case. The
default action, 'abort' will exit with an error message. With 'drop', the
tag will simply be omitted from the output. With 'rewrite', if the object
tagged was a commit, the tag will be modified to tag an alternate commit.
The alternate commit is determined by treating the original commit as the
"parent" of the tag and then using the parent rewriting algorithm of the
revision traversal machinery (related to the "--parents" option of "git
rev-list")
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When specifying paths to export, parent rewriting must be turned on for
fast-export to output anything at all.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code expects a ref name to be provided in commit->util. While there
was some code to set commit->util, it only worked in cases where there was
an unbroken chain of revisions from a ref to the relevant commit. In
cases such as running
git fast-export --parents master -- COPYING
commit->util would fail to be set. The old method of setting commit->util
has been removed in favor of requesting show_source from the revision
traversal machinery (related to the "--source" option of "git log" family
of commands.)
However, this change does not fix cases like
git fast export master~1
or
git fast export :/arguments
since in such cases commit->util will be "master~1" or ":/arguments" while
we need the actual ref (e.g. "refs/heads/master")
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c0582c53bc introduced logic to just
omit tags that point to tree objects. However, these objects were still
being output and were pointing at "mark :0", which caused fast-import to
crash. This patch makes sure such tags (including deeper nestings such
as tags of tags of trees), are omitted.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup_revisions sets a variety of flags based on the setting of other
flags, such as setting the limited flag when topo_order is set. To avoid
circumventing any invariants created by setup_revisions, we set
revs.topo_order before calling it rather than after.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When combining "dumb client" and human-friendly access by using the
'.git' extension to switch between the two, make sure the AliasMatch
covers the entire request. Without a full match, a request for
http://git.example.com/project/shortlog/branch..gitsomething
would result in a 404 because the server would try to access the
the project 'project/shortlog/branch.'
The solution is still not bulletproof, so document the possible failing
case.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a small test case for git archive --remote (and thus
git-upload-archive), which so far went untested.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lots of die() calls did not actually report the kind of error, which
can leave the user confused as to the real problem. Use die_errno()
where we check a system/library call that sets errno on failure, or
one of the following that wrap such calls:
Function Passes on error from
-------- --------------------
odb_pack_keep open
read_ancestry fopen
read_in_full xread
strbuf_read xread
strbuf_read_file open or strbuf_read_file
strbuf_readlink readlink
write_in_full xwrite
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change calls to die(..., strerror(errno)) to use the new die_errno().
In the process, also make slight style adjustments: at least state
_something_ about the function that failed (instead of just printing
the pathname), and put paths in single quotes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many calls to die() that do, or should, report
strerror(errno) to indicate how the syscall they guard failed.
Introduce a small helper function for this case.
Note:
- POSIX says vsnprintf can modify errno in some unlikely cases, so we
have to use errno early.
- We take some care to pass the original format to die_routine(), in
case someone wants to call die_errno() with custom format
characters.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cloning/initializing svn repositories with an uncanonicalize url
does not work as libsvn throws an assertion. This patch
canonicalize svn uris for the clone and init command from
git-svn.
[ew: fixed trailing whitespace]
Signed-off-by: Ulrich Dangel <uli@spamt.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
The stray dot broke bash and probably some other shells,
but worked fine with dash in my limited testing.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
For users pulling from machines with self compiled git installs,
in non-PATH locations, they can set the config option
remote.<name>.uploadpack to set the location of git-upload-pack.
When using 'git remote show <name>', the remote HEAD check
did not use the uploadpack configuration setting, and would
not use the configured program.
In builtin-remote.c, the config setting is already loaded
with the call to remote_get(), so this patch passes that remote
along to transport_get().
Signed-off-by: Chris Frey <cdfrey@foursquare.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Marc Branchaud wrote:
> I'm fairly happy with this, except for the way the branch
> subcommand matches refspecs. The patch does a simple string
> comparison, but it'd be better to do an actual glob. I just
> couldn't track down the right function for that, so I left it as
> a strcmp and hope that a gitizen can tell me how to glob here.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This enables git-svn.perl to read multiple 'branches' and 'tags' entries in
svn-remote config sections. The init and clone subcommands also support
multiple --branches and --tags arguments.
The branch (and tag) subcommand gets a new argument: --destination (or -d).
This argument is required if there are multiple branches (or tags) entries
configured for the remote Subversion repository. The argument's value
specifies which branch (or tag) path to use to create the branch (or tag).
The specified value must match the left side (without wildcards) of one of
the branches (or tags) refspecs in the svn-remote's config.
[ew: avoided explicit loop when combining globs with "push"]
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Add a command to unwind the effects of fetch by moving the rev_map
and refs/remotes/git-svn back to an old SVN revision. This allows
revisions to be re-fetched. Ideally SVN revs would be immutable,
but permissions changes in the SVN repository or indiscriminate use
of '--ignore-paths' can create situations where fetch cannot make
progress.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
By limiting start revision of find_rev_before to max existing
revision. This avoids a long wait if you do
'git svn reset -r 9999999'. The linear search within the
contiguous revisions doesn't seem to be a problem.
[ew: expanded commit message]
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Previously there was no explicit 'help' command, but 'git svn help'
still printed the usage message (as an invalid command), provided you
got past the initialization steps that required a valid repo.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
'git svn dcommit' takes an optional revision argument, but the meaning
of it was rather scary. It completely ignored the current state of
the HEAD, only looking at the revisions between SVN and $rev. If HEAD
was attached to $branch, the branch lost all commits $rev..$branch in
the process.
Considering that 'git svn dcommit HEAD^' has the intuitive meaning
"dcommit all changes on my branch except the last one", we change the
meaning of the revision argument. git-svn temporarily checks out $rev
for its work, meaning that
* if a branch is specified, that branch (_not_ the HEAD) is rebased as
part of the dcommit,
* if some other revision is specified, as in the example, all work
happens on a detached HEAD and no branch is affected.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
If the shell is not specified using the '#!' notation, then the OS will
use '/bin/sh' to execute the script which may not produce the desired
results. In particular, /bin/sh on Solaris interprets '^' specially which
has an effect on the sed command that this patch touches.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new test does a 'chmod 0', which does not have the intended
effect on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the objects that a client pushes to the server cannot be processed for
any reason, an error is reported back to the client via the git protocol.
We used to send quite detailed information if a system call failed if
unpack-objects is run. This can be regarded as an information leak. Now we
do not send any error details like we already do in the case where
index-pack failed.
Errors in system calls as well as the exit code of unpack-objects and
index-pack are now reported to stderr; in the case of a local push or via
ssh these messages still go to the client, but that is OK since these forms
of access to the server assume that the client can be trusted. If
receive-pack is run from git-daemon, then the daemon should put the error
messages into the syslog.
With this reasoning a new status report is added for the post-update-hook;
untrusted (i.e. daemon's) clients cannot observe its status anyway, others
may want to know failure details.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
That is what the documentation says, but the code pretends as if all the
known whitespace error tokens were given.
Among the whitespace error tokens, there is one kind that loosens the rule
when set: cr-at-eol. Which means that whitespace error token that is set
to true ignores a newly introduced CR at the end, which is inconsistent
with the documentation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a CR is accidentally added at the end of a C source file in the git
project tree, "git diff --check" doesn't detect it as an error.
$ echo abQ | tr Q '\015' >>fast-import.c
$ git diff --check
I think this is because the "whitespace" attribute is set to *.[ch] files
without specifying what kind of errors are caught. It makes git "notice
all types of errors" (as described in the documentation), but I think it
is incorrectly setting cr-at-eol, too, and hides this error.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test wanted to make sure that cherry-pick exits with status 1,
but with the way it was placed after "git checkout master &&" meant
that it could have misjudged success if checkout barfed with the
same failure status.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also make the docs more consistent with the usage message. While we're
here remove the zero initializers from the static variables as they're
unnecessary.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.2:
git-show-ref.txt: remove word and make consistent
git-svn documentation: fix typo in 'rebase vs. pull/merge' section
use xstrdup, not strdup in ll-merge.c
* maint-1.6.1:
git-show-ref.txt: remove word and make consistent
git-svn documentation: fix typo in 'rebase vs. pull/merge' section
use xstrdup, not strdup in ll-merge.c
* maint-1.6.0:
git-show-ref.txt: remove word and make consistent
git-svn documentation: fix typo in 'rebase vs. pull/merge' section
use xstrdup, not strdup in ll-merge.c
Under is better than in because of the nested nature of the .git
directory.
"also using" sounds a little odd, plus we say combined with later on so
just use that.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few remaining ones, but this fixes the trivial ones. It boils
down to two main issues that sparse complains about:
- warning: Using plain integer as NULL pointer
Sparse doesn't like you using '0' instead of 'NULL'. For various good
reasons, not the least of which is just the visual confusion. A NULL
pointer is not an integer, and that whole "0 works as NULL" is a
historical accident and not very pretty.
A few of these remain: zlib is a total mess, and Z_NULL is just a 0.
I didn't touch those.
- warning: symbol 'xyz' was not declared. Should it be static?
Sparse wants to see declarations for any functions you export. A lack
of a declaration tends to mean that you should either add one, or you
should mark the function 'static' to show that it's in file scope.
A few of these remain: I only did the ones that should obviously just
be made static.
That 'wt_status_submodule_summary' one is debatable. It has a few related
flags (like 'wt_status_use_color') which _are_ declared, and are used by
builtin-commit.c. So maybe we'd like to export it at some point, but it's
not declared now, and not used outside of that file, so 'static' it is in
this patch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is special handling in compat/regex/regex.c for the GNU compiler
to define alloca to __builtin_alloca, but the native compiler must include
alloca.h which happens when HAVE_ALLOCA_H is defined.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/pushurl:
avoid NULL dereference on failed malloc
builtin-remote: Make "remote -v" display push urls
builtin-remote: Show push urls as well
technical/api-remote: Describe new struct remote member pushurl
t5516: Check pushurl config setting
Allow push and fetch urls to be different
* sb/pull-rebase:
parse-remote: remove unused functions
parse-remote: support default reflist in get_remote_merge_branch
parse-remote: function to get the tracking branch to be merge
* sb/maint-1.6.0-add-config-fix:
add: allow configurations to be overriden by command line
use xstrdup, not strdup in ll-merge.c
Conflicts:
builtin-add.c
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Allow diff view without context lines
gitk: Add another string to translation
gitk: Add option 'Simple history' to the options menu
gitk: Handle msysGit version during version comparisons
gitk: Make more options easily accessible from Edit View dialog
gitk: Check git version before using --textconv flag
gitk: Use --textconv to generate diff text
gitk: Update German translation.
Don't call git_config after parsing the command line options, otherwise
the config settings will override any settings made by the command line.
This can be seen by setting add.ignore_errors and then specifying
--no-ignore-errors when using git-add.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach stash pop, apply, save, and drop to be quiet when told. By using
the quiet option (-q), these actions will be silent unless errors are
encountered.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am and git-rebase are talkative scripts. Teach them to be quiet when
told, allowing them to speak only when they fail or experience errors.
The quiet option is maintained when git-am or git-rebase fails to apply
a patch. This means subsequent --resolved, --continue, --skip, --abort
invocations will be quiet if the original invocation was quiet.
Drop a handful of >&2 redirection; the rest of the program sends all the
info messages to stdout, not to stderr.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
upload-pack runs pack-objects, which generates progress indicator output
on its stderr. If the client requests a sideband, this indicator is sent
to the client; but if it did not, then the progress is written to
upload-pack's own stderr.
If upload-pack is itself run from git-daemon (and if the client did not
request a sideband) the progress indicator never reaches the client and it
need not be generated in the first place. With this patch the progress
indicator is suppressed in this situation.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If git-daemon is run with --detach or --inetd, then stderr is explicitly
redirected to /dev/null. But notice that the service programs were spawned
via execl_git_cmd(), in particular, the stderr channel is inherited from
the daemon. This means that errors that the programs wrote to stderr (for
example, via die()), went to /dev/null.
This patch arranges that the daemon does not merely exec the service
program, but forks it and monitors stderr of the child; it writes the
errors that it produces to the daemons log via logerror().
A consequence is that the daemon process remains in memory for the full
duration of the service program, but this cannot be avoided.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a configuration option, http.sslCertPasswordProtected, and associated
environment variable, GIT_SSL_CERT_PASSWORD_PROTECTED, to enable SSL client
certificate password prompt from within git. If this option is false and
if the environment variable does not exist, git falls back to OpenSSL's
prompts (as in earlier versions of git).
The environment variable may only be used to enable, not to disable
git's password prompt. This behavior mimics GIT_NO_VERIFY; the mere
existence of the variable is all that is checked.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an SSL client certificate is enabled (via http.sslcert or
GIT_SSL_CERT), prompt for the certificate password rather than
defaulting to OpenSSL's password prompt. This causes the prompt to only
appear once each run. Previously, OpenSSL prompted the user *many*
times, causing git to be unusable over HTTPS with client-side
certificates.
Note that the password is stored in memory in the clear while the
program is running. This may be a security problem if git crashes and
core dumps.
The user is always prompted, even if the certificate is not encrypted.
This should be fine; unencrypted certificates are rare and a security
risk anyway.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on how your CVS->GIT conversion went you will have some
unexpanded CVS keywords in your GIT repo. If any of your git commits
touch these lines then the patch application will fail. This patch
addresses that by adding an option that will revert and expanded CVS
keywords to files in the working CVS directory that are affected by
the commit being applied.
Signed-off-by: Alex Bennée <alex@bennee.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the minimimum required libcurl version for the http.sslKey option
to 7.9.3. Previously, preprocessor macros checked for >= 7.9.2, which
is incorrect because CURLOPT_SSLKEY was introduced in 7.9.3. This now
allows git to compile with libcurl 7.9.2.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The system regex is either slow or buggy for complex
patterns, like the built-in xfuncname pattern for java
files.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was no tweakable knob to use the regex compat code; it
was embedded in the mingw build. Since other platforms may
want to use it, let's factor it out in the usual way for
build configuration knobs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For another patch series I'm working on I needed some tests
for the cc-cmd feature of git-send-email.
This patch adds 3 tests for the feature and for the possibility
to specify --suppress-cc multiple times, and fixes two bugs.
The first bug is that the --suppress-cc option for `cccmd' was
misspelled as `ccmd' in the code. The second bug, which is
actually found only with my other series, is that the argument
to the cccmd is never quoted, so the cccmd would fail with
patch file names containing a space.
A third bug I fix (in the docs) is that the bodycc argument was
actually spelled ccbody in the documentation and bash completion.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Cc: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the refspec "<src>:" would be expanded to
"<src>:refs/heads/". Instead, treat an empty <dst> just like refspecs
without a colon.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this patch, symbolic links are turned into empty files.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Cygwin, poll() reports POLLIN even for file descriptors that have
reached their end. This caused git upload-archive to be stuck in an
infinite loop, as it only looked at the POLLIN flag.
In addition to POLLIN, check if read() returned 0, which indicates
end-of-file, and keep looping only as long as at least one of the file
descriptors has input. This lets the following command finish on its
own when run in a git repository on Cygwin, instead of it getting stuck
after printing all file names:
$ git archive -v --remote . HEAD >/dev/null
Reported-by: Bob Kagy <bobkagy@gmail.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the old regex
^[ \t]*(([ \t]*[A-Za-z_][A-Za-z_0-9]*){2,}[ \t]*\([^;]*)$
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
you can backtrack arbitrarily from [A-Za-z_0-9]* into [A-Za-z_], thus
causing an exponential number of backtracks. Ironically it also causes
the regex not to work as intended; for example "catch" can match the
underlined part of the regex, the first repetition matching "c" and
the second matching "atch".
The replacement regex avoids this problem, because it makes sure that
at least a space/tab is eaten on each repetition. In other words,
a suffix of a repetition can never be a prefix of the next repetition.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that there is say() in git-sh-setup, these scripts don't need to use
their own. Migrate them over by setting GIT_QUIET and removing their
custom say() functions.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Scripts should use say() when they want to output non-error messages.
This function helps future script writers easily implement a quiet
option by setting GIT_QUIET to enable suppression of non-error messages.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am with 3-way outputs errors when applying, even though the
3-way will usually be successful. We suppress these errors from
git-apply because they are not "true" errors until the 3-way has been
attempted.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 4b7cc26 (git-am: use printf instead of echo on user-supplied
strings, 2007-05-25) fixed a bug where subjects with newlines would
cause git-am to echo multiple lines when it says "Applying: <subject>".
This test ensures that fix stays valid.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shifting 'unsigned char' or 'unsigned short' left can result in sign
extension errors, since the C integer promotion rules means that the
unsigned char/short will get implicitly promoted to a signed 'int' due to
the shift (or due to other operations).
This normally doesn't matter, but if you shift things up sufficiently, it
will now set the sign bit in 'int', and a subsequent cast to a bigger type
(eg 'long' or 'unsigned long') will now sign-extend the value despite the
original expression being unsigned.
One example of this would be something like
unsigned long size;
unsigned char c;
size += c << 24;
where despite all the variables being unsigned, 'c << 24' ends up being a
signed entity, and will get sign-extended when then doing the addition in
an 'unsigned long' type.
Since git uses 'unsigned char' pointers extensively, we actually have this
bug in a couple of places.
I may have missed some, but this is the result of looking at
git grep '[^0-9 ][ ]*<<[ ][a-z]' -- '*.c' '*.h'
git grep '<<[ ]*24'
which catches at least the common byte cases (shifting variables by a
variable amount, and shifting by 24 bits).
I also grepped for just 'unsigned char' variables in general, and
converted the ones that most obviously ended up getting implicitly cast
immediately anyway (eg hash_name(), encode_85()).
In addition to just avoiding 'unsigned char', this patch also tries to use
a common idiom for the delta header size thing. We had three different
variations on it: "& 0x7fUL" in one place (getting the sign extension
right), and "& ~0x80" and "& 0x7f" in two other places (not getting it
right). Apart from making them all just avoid using "unsigned char" at
all, I also unified them to then use a simple "& 0x7f".
I considered making a sparse extension which warns about doing implicit
casts from unsigned types to signed types, but it gets rather complex very
quickly, so this is just a hack.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, a fluky allocation failure would cause merge
configuration settings to be silently ignored.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* builtin-remote.c (get_one_entry): Use xmalloc, not malloc.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a clean_abort function that echoes an optional error message
to standard error, removes the dotest directory and exits with status 1.
Use it when patch format detection or patch splitting fails early.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to include only the modified and typechanged directories
in the ouptut, but for consistency's sake, we should also include
added and removed ones as well.
This makes the output more consistent, but it may break existing scripts
that expect to see the current output which has long been the established
behaviour.
Signed-off-by: Nick Edelen <sirnot@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/fix-send-email-threaded:
send-email: fix a typo in a comment
send-email: fix threaded mails without chain-reply-to
add a test for git-send-email for threaded mails without chain-reply-to
doc/send-email: clarify the behavior of --in-reply-to with --no-thread
send-email: fix non-threaded mails
add a test for git-send-email for non-threaded mails
* rc/http-push: (22 commits)
http*: add helper methods for fetching objects (loose)
http*: add helper methods for fetching packs
http: use new http API in fetch_index()
http*: add http_get_info_packs
http-push.c::fetch_symref(): use the new http API
http-push.c::remote_exists(): use the new http API
http.c::http_fetch_ref(): use the new http API
transport.c::get_refs_via_curl(): use the new http API
http.c: new functions for the http API
http: create function end_url_with_slash
http*: move common variables and macros to http.[ch]
transport.c::get_refs_via_curl(): do not leak refs_url
Don't expect verify_pack() callers to set pack_size
http-push: do not SEGV after fetching a bad pack idx file
http*: copy string returned by sha1_to_hex
http-walker: verify remote packs
http-push, http-walker: style fixes
t5550-http-fetch: test fetching of packed objects
http-push: fix missing "#ifdef USE_CURL_MULTI" around "is_running_queue"
http-push: send out fetch requests on queue
...
* 'cc/bisect' (early part):
t6030: test skipping away from an already skipped commit
bisect: when skipping, choose a commit away from a skipped commit
bisect: add parameters to "filter_skipped"
bisect: display first bad commit without forking a new process
bisect: drop unparse_commit() and use clear_commit_marks()
* sp/msysgit:
compat/ has subdirectories: do not omit them in 'make clean'
Fix typo in nedmalloc warning fix
MinGW: Teach Makefile to detect msysgit and apply specific settings
Fix warnings in nedmalloc when compiling with GCC 4.4.0
Add custom memory allocator to MinGW and MacOS builds
MinGW readdir reimplementation to support d_type
connect.c: Support PuTTY plink and TortoisePlink as SSH on Windows
git: browsing paths with spaces when using the start command
MinGW: fix warning about implicit declaration of _getch()
test-chmtime: work around Windows limitation
Work around a regression in Windows 7, causing erase_in_line() to crash sometimes
Quiet make: do not leave Windows behind
MinGW: GCC >= 4 does not need SNPRINTF_SIZE_CORR anymore
Conflicts:
Makefile
* bc/solaris:
configure: test whether -lresolv is needed
Makefile: insert SANE_TOOL_PATH to PATH before /bin or /usr/bin
git-compat-util.h: avoid using c99 flex array feature with Sun compiler 5.8
Makefile: add section for SunOS 5.7
Makefile: introduce SANE_TOOL_PATH for prepending required elements to PATH
Makefile: define __sun__ on SunOS
git-compat-util.h: tweak the way _XOPEN_SOURCE is set on Solaris
On Solaris choose the OLD_ICONV iconv() declaration based on the UNIX spec
Makefile: add NEEDS_RESOLV to optionally add -lresolv to compile arguments
Makefile: use /usr/ucb/install on SunOS platforms rather than ginstall
Conflicts:
Makefile
Rewrite the gc section using unresolved and resolved instead of "not
recorded". Add plurals and missing articles. Make some sentences have
consistent tense. Try and be more active by removing "that" and
simplifying sentences.
The terms "hand-resolve" and "hand resolve" were used, so just use "hand
resolve" to be more consistent.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This warning was probably useless anyway, but it is even more so now
that filtering of skipped commits is done in C and that there is a
mechanism to skip away from broken commits.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using a PRNG (pseudo random number generator) with a bias should be better
than alternating between 3 fixed ratios.
In repositories with many untestable commits it should prevent alternating
between areas where many commits are untestable. The bias should favor
commits that can give more information, so that the bisection process
should not loose much efficiency.
HPA suggested to use a PRNG and found that the best bias is to raise a
ratio between 0 and 1 given by the PRNG to the power 1.5.
An integer square root function is implemented to avoid including
<math.h> and linking with -lm.
A PRNG function is implemented to get the same number sequence on
different machines as suggested by "man 3 rand".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, "remote -v" simply lists all urls so that one has to remember
that only the first one is used for fetches, and all are used for
pushes.
Change this so that the role of an url is displayed in parentheses, and
also display push urls.
Example with "one" having one url, "two" two urls, "three" one url and
one pushurl:
one hostone.com:/somepath/repoone.git (fetch)
one hostone.com:/somepath/repoone.git (push)
three http://hostthree.com/otherpath/repothree.git (fetch)
three hostthree.com:/pathforpushes/repothree.git (push)
two hosttwo.com:/somepath/repotwo.git (fetch)
two hosttwo.com:/somepath/repotwo.git (push)
two hosttwobackup.com:/somewheresafe/repotwo.git (push)
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach builtin remote to show push urls also when asked to
"show" a specific remote.
This improves upon the standard display mode: multiple specified "url"s
mean that the first one is for fetching, all are used for pushing. We
make this clearer now by displaying the first one prefixed with "Fetch
URL", and all "url"s (or, if present, all "pushurl"s) prefixed with
"Push URL".
Example with "one" having one url, "two" two urls, "three" one url and
one pushurl (URL part only):
* remote one
Fetch URL: hostone.com:/somepath/repoone.git
Push URL: hostone.com:/somepath/repoone.git
* remote two
Fetch URL: hosttwo.com:/somepath/repotwo.git
Push URL: hosttwo.com:/somepath/repotwo.git
Push URL: hosttwobackup.com:/somewheresafe/repotwo.git
* remote three
Fetch URL: http://hostthree.com/otherpath/repothree.git
Push URL: hostthree.com:/pathforpushes/repothree.git
Also, adjust t5505 accordingly and make it test for the new output.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/maint-fix-send-email-threaded:
doc/send-email: clarify the behavior of --in-reply-to with --no-thread
send-email: fix non-threaded mails
add a test for git-send-email for non-threaded mails
Conflicts:
git-send-email.perl
t/t9001-send-email.sh
An earlier commit 15da108 ("send-email: 'References:' should only
reference what is sent", 2009-04-13) broke logic to set up threading
information for the next message by rewriting "!" to "not" without
understanding the precedence rules of the language.
Namely,
! defined $reply_to || length($reply_to) == 0
was changed to
not defined $reply_to || length($reply_to) == 0
which is
not (defined $reply_to || length($reply_to) == 0)
and different from what was intended, which is
(not defined $reply_to) || (length($reply_to) == 0)
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After commit 3e0c4ff (send-email: respect in-reply-to regardless of
threading, 2009-03-01) the variable $thread was only used for prompting
for an "In-Reply-To", but not for controlling whether the "In-Reply-To"
and "References" fields should be written into the email.
Thus these fields were always used beginning with the second mail and it
was not possible to produce non-threaded mails anymore.
However, a later commit 15da108 ("send-email: 'References:' should only
reference what is sent", 2009-04-13) introduced a regression with the
side effect to make non-threaded mails possible again, but only when
--no-chain-reply-to was used.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-send-email docs do not mention except in the usage lines
the combined patch formatting/sending ability of git-send-email.
This patch expands on the possible arguments to git-send-email
and explains the meaning of the rev-list argument.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expand get_remote_merge_branch to compute the tracking branch to merge
when called without arguments (or only the remote name). This allows
"git pull --rebase" without arguments (default upstream branch) to
work with a rebased upstream. With explicit arguments it already worked.
Also add a test to check for this case.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only user of get_remote_refs_for_fetch was "git pull --rebase" and
it only wanted the tracking branch to be merge. So, add a simple
function (get_remote_merge_branch) with this new meaning.
No behavior changes. The new function behaves like the old code in
"git pull --rebase". In particular, it only works with the default
refspec mapping and with remote branches, not tags.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It only searches for now for the dreaded LASTARG_DEFAULT | OPTARG
combination, but can be extended to check for any other forbidden
combination.
Options are checked each time we call parse_options_start.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if -lresolv is needed for hstrerror; set NEEDS_RESOLV
accordingly, and substitute in config.mak.in.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an earlier patch, we introduced SANE_TOOL_PATH that is prepended to
user's PATH. This had an unintended consequence of overriding user's
private binary directory that typically comes earlier in the PATH to holds
even saner commands than whatever comes with the system.
For example, a user may have ~/bin that is early in the path and contains
a shell script "vi" that launches system's /bin/vi with specific options.
Prepending SANE_TOOL_PATH to the PATH that happens to have "vi" in it
defeats such customization.
This fixes the issue by inserting SANE_TOOL_PATH just before /bin or
/usr/bin appears on the PATH.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Offload object enumeration in upload-pack to pack-objects, but fall
back on internal revision walker for shallow interaction. Aside from
architecturally making more sense, this also leaves the door open for
pack-objects to employ a revision cache mechanism. Test t5530 updated
in order to explicitly check both enumeration methods.
Signed-off-by: Nick Edelen <sirnot@gmail.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current text makes some users feel uneasy, worrying whether
'-a' could lead to corrupt repositories. Clarify that '-a'
may lead to performance issues only for dumb protocols.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Helped-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check whether the new remote.${remotename}.pushurl setting is obeyed
and whether it overrides remote.${remotename}.url.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a config setting remote.$remotename.pushurl which is
used for pushes only. If absent remote.$remotename.url is used for
pushes and fetches as before.
This is useful, for example, in order to do passwordless fetches
(remote update) over the git transport but pushes over ssh.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
diff.c: plug a memory leak in an error path
fetch-pack: close output channel after sideband demultiplexer terminates
builtin-remote: Make "remote show" display all urls
'git stash pop' supports the '--index' option since its initial
implementation (bd56ff54, git-stash: add new 'pop' subcommand,
2008-02-22), but its documentation does not mention it explicitly.
Moreover, both the usage shown by 'git stash -h' and the synopsis
section in the man page imply that 'git stash pop' does not have an
'--index' option.
First, this patch corrects the usage and the synopsis section.
Second, the patch moves the description of the '--index' option to the
'git stash pop' section in the documentation, and refers to it from
the 'git stash apply' section. This way it follows the intentions of
commit d1836637 (Documentation: teach stash/pop workflow instead of
stash/apply, 2009-05-28), as all 'git stash pop'-related documentation
will be in one place without references to 'git stash apply'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
5734365 (show-branch: migrate to parse-options API 2009-05-21)
incorrectly set the --more option's flags to be
PARSE_OPT_LASTARG_DEFAULT and PARSE_OPT_OPTARG. These two flags
shouldn't be used together. An option taking a default should just set
the default value desired and parse options will take care of the rest.
Update the header comment to better convey this information.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rest of the git source has been converted to use upper-case character
encoding names to assist older platforms. The charset attribute of MIME
is defined to be case-insensitive, but older platforms may still have an
easier time dealing with upper-case rather than lower-case. So do so for
send-email too.
Update t9001 to handle the changes.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to rfc2047, an encoded word has the following form:
encoded-word = "=?" charset "?" encoding "?" encoded-text "?="
charset = token
encoding = token
token = <Any CHAR except SPACE, CTLs, and especials>
especials = "(" / ")" / "<" / ">" / "@" / "," / ";" / ":" / "
<"> / "/" / "[" / "]" / "?" / "." / "="
encoded-text = <Any printable ASCII character other than "?"
or SPACE>
And rfc822 defines CHARs and CTLs as:
CHAR = <any ASCII character> ; ( 0-177, 0.-127.)
CTL = <any ASCII control ; ( 0- 37, 0.- 31.)
character and DEL> ; ( 177, 127.)
The original code only detected rfc2047 encoded strings when the charset
was UTF-8. This patch generalizes the matching expression and breaks the
check for an rfc2047 encoded string into its own function. There's no real
functional change, since any properly rfc2047 encoded string would have
fallen through the remaining 'if' statements and been returned unchanged.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch-pack runs the sideband demultiplexer using start_async(). This
facility requires that the asynchronously executed function closes the
output file descriptor (see Documentation/technical/api-run-command.txt).
But the sideband demultiplexer did not do that. This fixes it.
In certain error situations this could lock up a fetch operation on
Windows because the asynchronous function is run in a thread; by not
closing the output fd the reading end never got EOF and waited for more
data indefinitely. On Unix this is not a problem because the asynchronous
function is run in a separate process, which exits after the function ends
and so implicitly closes the output.
Since the pack that is sent over the wire encodes the number of objects in
the stream, during normal operation the reading end knows when the stream
ends and terminates by itself, and does not lock up.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the way in which the configure script handles --without-iconv
(and --with-iconv=no), which it used to essentially ignore.
Also fix the way the configure script determines the value of
NEEDS_LIBICONV, which would be incorrectly set to 'YesPlease' on
systems that lack iconv entirely.
Signed-off-by: Marco Nelissen <marcone@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Sun c99 compiler as recent as version 5.8 Patch 121016-06 2007/08/01
produces an error when compiling diff-delta.c. This source file #includes
the delta.h header file which pre-declares a struct which is later defined
to contain a flex array member. The Sun c99 compiler fails to compile
diff-delta.c and gives the following error:
"diff-delta.c", line 314: identifier redeclared: create_delta
current : function(pointer to const struct delta_index {unsigned long memsize, pointer to const void src_buf, unsigned long src_size, unsigned int hash_mask, array[-1] of pointer to struct index_entry {..} hash}, pointer to const void, unsigned long, pointer to unsigned long, unsigned long) returning pointer to void
previous: function(pointer to const struct delta_index {unsigned long memsize, pointer to const void src_buf, unsigned long src_size, unsigned int hash_mask, array[-1] of pointer to struct index_entry {..} hash}, pointer to const void, unsigned long, pointer to unsigned long, unsigned long) returning pointer to void : "delta.h", line 44
c99: acomp failed for diff-delta.c
So, avoid using this c99 feature when compiling with the Sun c compilers
version 5.8 and older (the most recent version tested).
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, "git remote -v" lists all urls whereas "git remote show
$remote" shows only the first. Make it so that both show all.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit changes handling of the msysgit specific settings, so
that they can be applied to official git.git. Some msysgit
settings differ from the standard MinGW settings. We move them
into an ifndef block that is only evaluated if a file
THIS_IS_MSYSGIT is present in the parent directory, which is the
case for an msysgit working environment. The tag file is unlikely
to be present accidentally.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nedmalloc's source code has a cute #define construct to avoid inserting
an if() statement, because that might interact badly with enclosing if()
statements. However, GCC > 4 complains with a "warning: value computed
is not used". So we cast the result to "void".
GCC also does not understand the Visual C++ specific pragmas, so we need
to disable them for MinGW.
We need to include malloc.h on Windows even if we happen to compile the
stuff as a MinGW program. Otherwise the function declaration of alloca()
is missing.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add {}-braces around an else-part, where the if-part already has
{}-braces.
And, also remove some unnecessary "return;"-statements at the end of
"void foo()"-functions.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add references to the gitworkflows(7) manpage added in f948dd8
(Documentation: add manpage about workflows, 2008-10-19) to both
gittutorial(1) and git(1), so that new users might actually discover
and read it.
Noticed by Randal L. Schwartz.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1.4.4.5 (49ba83fb67 "Add virtualization support to git-daemon")
git daemon enters an infinite loop and never terminates if a client
hides any extra arguments in the initial request line which is not
exactly "\0host=blah\0".
Since that change, a client must never insert additional extra
arguments, or attempt to use any argument other than "host=", as
any daemon will get stuck parsing the request line and will never
complete the request.
Since the client can't tell if the daemon is patched or not, it
is not possible to know if additional extra args might actually be
able to be safely requested.
If we ever need to extend the git daemon protocol to support a new
feature, we may have to do something like this to the exchange:
# If both support git:// v2
#
C: 000cgit://v2
S: 0010ok host user
C: 0018host git.kernel.org
C: 0027git-upload-pack /pub/linux-2.6.git
S: ...git-upload-pack header...
# If client supports git:// v2, server does not:
#
C: 000cgit://v2
S: <EOF>
C: 003bgit-upload-pack /pub/linux-2.6.git\0host=git.kernel.org\0
S: ...git-upload-pack header...
This requires the client to create two TCP connections to talk to
an older git daemon, however all daemons since the introduction of
daemon.c will safely reject the unknown "git://v2" command request,
so the client can quite easily determine the server supports an
older protocol.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the argh printing by simply calling usage_argh() if the option
can take an argument. Update macros defined in parse-options.h to set
the PARSE_OPT_NOARG flag.
The only other user of custom non-argument taking options is git-apply
(in this case OPTION_BOOLEAN for deprecated options). Update it to set
the PARSE_OPT_NOARG flag.
Thanks to Ren辿 Scharfe for the suggestion and starter patch.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Reviewd-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPTION_INTEGER hardcodes its argh member to be "n", but the decision is
hidden deep in usage_with_options_internal(). Make "n" the default argh
for the OPT_INTEGER macro while leaving it undecided for the OPTION_INTEGER
enum.
This makes it less surprising to users that argh is "n" when using the
OPT_INTEGER macro.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Reviewed-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms (like SunOS and family) have kept their common binaries at
some historical moment in time, and introduced new binaries with modern
features in a special location like /usr/xpg4/bin or /usr/ucb. Some of the
features provided by these modern binaries are expected and required by git.
If the featureful binaries are not in the users path, then git could end up
using the less featureful binary and fail.
So provide a mechanism to prepend elements to the users PATH at runtime so
the modern binaries will be found.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SUNWspro compiler does not define __sun__ (like GCC does). A check of
this macro was recently added to detect compilation on SunOS and to modify
the handling of the NO_ICONV and _XOPEN_SOURCE feature macros.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Solaris, when _XOPEN_EXTENDED is set, its header file forces the
programs to be XPG4v2, defeating any _XOPEN_SOURCE setting to say we are
XPG5 or XPG6. Also on Solaris, XPG6 programs must be compiled with a c99
compiler, while non XPG6 programs must be compiled with a pre-c99 compiler.
So when compiling on Solaris, always refrain from setting _XOPEN_EXTENDED,
and then set _XOPEN_SOURCE to 600 or 500 based on whether a c99 compiler
is being used or not.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OLD_ICONV is only necessary on Solaris until UNIX03. This is indicated
by the private macro _XPG6 which is set in /usr/include/sys/feature_tests.h.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This library is required on Solaris when compiling with NO_IPV6 since
hstrerror resides in libresolv. Additionally, Solaris 7 will need it,
since inet_ntop and inet_pton reside there too.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To do that a new function "apply_skip_ratio" is added and another
function "managed_skipped" is created to wrap both "filter_skipped"
and the previous one.
In "managed_skipped" we detect when we should choose a commit away
from a skipped one and then we automatically choose a skip ratio
to pass to "apply_skip_ratio".
The ratio is choosen so that it alternates between 1/5, 2/5 and
3/5.
In "apply_skip_ratio", we ignore a given ratio of all the commits
that could be tested.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
because we will need to get more information from this function in
some later patches.
The new "int *count" parameter gives the number of commits left after
the skipped commit have been filtered out.
The new "int *skipped_first" parameter tells us if the first commit
in the list has been skipped. Note that using this parameter also
changes the behavior of the function if the first commit is indeed
skipped. Because we assume that in this case we will want all the
filtered commits, not just the first one, even if "show_all" is not
set.
So using a not NULL "skipped_first" parameter really means that we
plan to choose to test another commit than the first non skipped
one if the first commit in the list is skipped. That in turn means
that, in case the first commit is skipped, we have to return a
fully filtered list.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code handling the fetching of loose objects in http-push.c and
http-walker.c have been refactored into new methods and a new struct
(object_http_request) in http.c. They are not meant to be invoked
elsewhere.
The new methods in http.c are
- new_http_object_request
- process_http_object_request
- finish_http_object_request
- abort_http_object_request
- release_http_object_request
and the new struct is http_object_request.
RANGER_HEADER_SIZE and no_pragma_header is no longer made available
outside of http.c, since after the above changes, there are no other
instances of usage outside of http.c.
Remove members of the transfer_request struct in http-push.c and
http-walker.c, including filename, real_sha1 and zret, as they are used
no longer used.
Move the methods append_remote_object_url() and get_remote_object_url()
from http-push.c to http.c. Additionally, get_remote_object_url() is no
longer defined only when USE_CURL_MULTI is defined, since
non-USE_CURL_MULTI code in http.c uses it (namely, in
new_http_object_request()).
Refactor code from http-push.c::start_fetch_loose() and
http-walker.c::start_object_fetch_request() that deals with the details
of coming up with the filename to store the retrieved object, resuming
a previously aborted request, and making a new curl request, into a new
function, new_http_object_request().
Refactor code from http-walker.c::process_object_request() into the
function, process_http_object_request().
Refactor code from http-push.c::finish_request() and
http-walker.c::finish_object_request() into a new function,
finish_http_object_request(). It returns the result of the
move_temp_to_file() invocation.
Add a function, release_http_object_request(), which cleans up object
request data. http-push.c and http-walker.c invoke this function
separately; http-push.c::release_request() and
http-walker.c::release_object_request() do not invoke this function.
Add a function, abort_http_object_request(), which unlink()s the object
file and invokes release_http_object_request(). Update
http-walker.c::abort_object_request() to use this.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code handling the fetching of packs in http-push.c and
http-walker.c have been refactored into new methods and a new struct
(http_pack_request) in http.c. They are not meant to be invoked
elsewhere.
The new methods in http.c are
- new_http_pack_request
- finish_http_pack_request
- release_http_pack_request
and the new struct is http_pack_request.
Add a function, new_http_pack_request(), that deals with the details of
coming up with the filename to store the retrieved packfile, resuming a
previously aborted request, and making a new curl request. Update
http-push.c::start_fetch_packed() and http-walker.c::fetch_pack() to
use this.
Add a function, finish_http_pack_request(), that deals with renaming
the pack, advancing the pack list, and installing the pack. Update
http-push.c::finish_request() and http-walker.c::fetch_pack to use
this.
Update release_request() in http-push.c and http-walker.c to invoke
release_http_pack_request() to clean up pack request helper data.
The local_stream member of the transfer_request struct in http-push.c
has been removed, as the packfile pointer will be managed in the struct
http_pack_request.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
http-push.c and http-walker.c no longer have to use fetch_index or
setup_index; they simply need to use http_get_info_packs, a new http
method, in their fetch_indices implementations.
Move fetch_index() and rename to fetch_pack_index() in http.c; this
method is not meant to be used outside of http.c. It invokes
end_url_with_slash with base_url; apart from that change, the code is
identical.
Move setup_index() and rename to fetch_and_setup_pack_index() in
http.c; this method is not meant to be used outside of http.c.
Do not immediately set ret to 0 in http-walker.c::fetch_indices();
instead do it in the HTTP_MISSING_TARGET case, to make it clear that
the HTTP_OK and HTTP_MISSING_TARGET cases both return 0.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message ("Unable to start request") has been removed, since
the http API already prints it.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new functions added are:
- http_request() (internal function)
- http_get_strbuf()
- http_get_file()
- http_error()
http_get_strbuf and http_get_file allow respectively to retrieve contents of
an URL to a strbuf or an opened file handle.
http_error prints out an error message containing the URL and the curl error
(in curl_errorstr).
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic to append a slash to the url if necessary in quote_ref_url
(added in 113106e "http.c: use strbuf API in quote_ref_url") has been
moved to a new function, end_url_with_slash.
The method takes a strbuf, the URL, and the path to be appended to the
URL. It first adds the URL to the strbuf. It then appends a slash
if the URL does not end with a slash.
The check on ref in quote_ref_url for a slash at the beginning has been
removed as a result of using end_url_with_slash. This check is not
needed, because slashes will be quoted anyway.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move RANGE_HEADER_SIZE to http.h.
Create no_pragma_header, the curl header list containing the header
"Pragma:" in http.[ch]. It is allocated in http_init, and freed in
http_cleanup. This replaces the no_pragma_header in http-push.c, and
the no_pragma_header member in walker_data in http-walker.c.
Create http_is_verbose. It is to be used by methods in http.c, and is
modified at the entry points of http.c's users, namely http-push.c
(when parsing options) and http-walker.c (in get_http_walker).
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since use_pack() will end up populating pack_size if it is not already set,
we can just adapt the code in verify_packfile() such that it doesn't require
pack_size to be set beforehand.
This allows callers not to have to set pack_size themselves, and we can thus
revert changes from 1c23d794 (Don't die in git-http-fetch when fetching packs).
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a70c232 ("http-fetch: do not SEGV after fetching a bad pack idx
file"), changes were made to the setup_index method in http-fetch.c
(known in its present form as http-walker.c after 30ae764 ("Modularize
commit-walker")). Since http-push.c has similar similar code for
processing index files, these changes should apply to http-push.c's
implementation of setup_index as well.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the fetch_index implementations in http-push.c and http-walker.c,
the string returned by sha1_to_hex is assumed to stay immutable.
This patch ensures that hex stays immutable by copying the string
returned by sha1_to_hex (via xstrdup) and frees it subsequently. It
also refactors free()'s and fclose()'s with labels.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In c17fb6e ("Verify remote packs, speed up pending request queue"),
changes were made to index fetching in http-push.c, particularly the
methods fetch_index and setup_index. Since http-walker.c has similar
code for index fetching, these improvements should apply to
http-walker.c's fetch_index and setup_index.
Invocations of free() of string memory are reproduced as well.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Use tabs to indent, instead of spaces.
- Do not use curly-braces around a single statement body in
if/while statement;
- Do not start multi-line comment with description on the first
line after "/*", i.e.
/*
* We prefer this over...
*/
/* comments like
* this (notice the first line)
*/
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, requests for remote files were simply added to the queue
(pointed to by request_queue_head) and no transfer actually takes
place (the fill function add_fill_function() is not added until line
2441), even though code that followed may rely on these remote files to
be present (eg. the setup_revisions invocation).
The code that sends out the requests on the request queue is refactored
into the method run_request_queue.
After the get_dav_remote_heads invocation (ie. after fetch requests are
added to the queue), the requests on the queue are sent out through an
invocation to run_request_queue.
This invocation to run_request_queue entails adding a fill function
before pushing checks take place, which may lead to accidental,
unwanted pushes previously.
The flag is_running_queue is introduced to prevent this from occurring.
fill_active_slot is made to check the flag is_running_queue before
the sending of the requests proceeds.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set slot->local to NULL after doing a fclose() on the file it points
to. This prevents the passing of a FILE* pointer to a fclose()'d file
to ftell() in http.c::run_active_slot().
This issue was raised by Clemens Buchacher on 30th May 2009:
http://www.spinics.net/lists/git/msg104623.html
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a '$' in the __git_ps1 output to show stashed changes are present,
when GIT_PS1_SHOWSTASHSTATE is set to a nonempty value.
The code for checking if the stash has entries is taken from
'git-stash.sh'.
Signed-off-by: Daniel Trstenjak <daniel.trstenjak@online.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command "git grep -w ''" dies as soon as it encounters an empty line,
reporting (wrongly) that "regexp returned nonsense". The first hunk of
this patch relaxes the sanity check that is responsible for that,
allowing matches to start at the end.
The second hunk complements it by making sure that empty matches are
rejected if -w was specified, as they are not really words.
GNU grep does the same:
$ echo foo | grep -c ''
1
$ echo foo | grep -c -w ''
0
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* da/pretty-tempname:
diff: generate pretty filenames in prep_temp_blob()
compat: add a basename() compatibility function
compat: add a mkstemps() compatibility function
Conflicts:
Makefile
This simplifies the logic of rev_compare_tree() by removing a special
case.
It does so by turning the special case of finding a diff to be "all new
files" into a more generic case of "all new" vs "all removed" vs "mixed
changes", so now the code is actually more powerful and more generic, and
the added symmetry actually makes it simpler too.
This makes no changes to any existing behavior, but apart from the
simplification it does make it possible to some day care about whether all
changes were just deletions if we want to. Which we may well want to for
merge handling.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
blame: correctly handle a path that used to be a directory
add -i: do not dump patch during application
Update draft release notes for 1.6.3.2
grep: fix colouring of matches with zero length
Documentation: teach stash/pop workflow instead of stash/apply
Change xdl_merge to generate output even for null merges
t6023: merge-file fails to output anything for a degenerate merge
When trying to see if the same path exists in the parent, we ran
"diff-tree" with pathspec set to the path we are interested in with the
parent, and expect either to have exactly one resulting filepair (either
"changed from the parent", "created when there was none") or nothing (when
there is no change from the parent).
If the path used to be a directory, however, we will also see unbounded
number of entries that talk about the files that used to exist underneath
the directory in question. Correctly pick only the entry that describes
the path we are interested in in such a case (namely, the creation of the
path as a regular file).
Noticed by Ben Willard.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a debugging print that snuck in at 7a26e65 (Revert
"git-add--interactive: remove hunk coalescing", 2009-05-16).
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git submodule update --merge' merges the commit referenced by the
superproject into your local branch, instead of checking it out on
a detached HEAD.
As evidenced by the addition of "git submodule update --rebase", it
is useful to provide alternatives to the default 'checkout' behaviour
of "git submodule update". One such alternative is, when updating a
submodule to a new commit, to merge that commit into the current
local branch in that submodule. This is useful in workflows where
you want to update your submodule from its upstream, but you cannot
use --rebase, because you have downstream people working on top of
your submodule branch, and you don't want to disrupt their work.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The addition of "submodule.<name>.rebase" demonstrates the usefulness of
alternatives to the default behaviour of "git submodule update". However,
by naming the config variable "submodule.<name>.rebase", and making it a
boolean choice, we are artificially constraining future git versions that
may want to add _more_ alternatives than just "rebase".
Therefore, while "submodule.<name>.rebase" is not yet in a stable git
release, future-proof it, by changing it from
submodule.<name>.rebase = true/false
to
submodule.<name>.update = rebase/checkout
where "checkout" specifies the default behaviour of "git submodule update"
(checking out the new commit to a detached HEAD), and "rebase" specifies
the --rebase behaviour (where the current local branch in the submodule is
rebase onto the new commit). Thus .update == checkout is equivalent to
.rebase == false, and .update == rebase is equivalent to .rebase == true.
Finally, leaving .update unset is equivalent to leaving .rebase unset.
In future git versions, other alternatives to "git submodule update"
behaviour can be included by adding them to the list of allowable values
for the submodule.<name>.update variable.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/maint-1.6.0-xdl-merge-fix:
Change xdl_merge to generate output even for null merges
t6023: merge-file fails to output anything for a degenerate merge
Conflicts:
xdiff/xmerge.c
* jc/maint-add-p-coalesce-fix:
t3701: ensure correctly set up repository after skipped tests
Revert "git-add--interactive: remove hunk coalescing"
Splitting a hunk that adds a line at the top fails in "add -p"
Previously, die() would report the exit code of stop_httpd. Instead,
save and reset the exit code before dying.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exit trap should not be removed in case tests require cleanup code. This
is especially important if tests are executed with the --immediate option.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, unknown options would be ignored, including any subsequent
valid options.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a zero-length match is encountered, break out of loop and show the rest
of the line uncoloured. Otherwise we'd be looping forever, trying to make
progress by advancing the pointer by zero characters.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following is an easy mistake to make for users coming from version
control systems with an "update and commit"-style workflow.
1. git pull
2. resolve conflicts
3. git pull
Step 3 overrides MERGE_HEAD, starting a new merge with dirty index.
IOW, probably not what the user intended. Instead, refuse to merge
again if a merge is in progress.
Reported-by: Dave Olszewski <cxreg@pobox.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid code duplication by moving list tail search to match_refs().
This does not change the semantics, except for http-push, which now inserts
to the front of the ref list in order to get rid of the global remote_tail.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Copy the description of date-order from rev-list-options.txt, and then
reword it to be commit specific. While we're at it, put <rev> <glob>...
on a new line to not exceed 80 characters.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The standard allocator on Windows is pretty bad prior
to Windows Vista, and nedmalloc is better than the
modified dlmalloc provided with newer versions of the
MinGW libc.
NedMalloc stats in Git
----------------------
All results are the best result out of 3 runs. The
benchmarks have been done on different hardware, so
the repack times are not comparable.
These benchmarks are all based on 'git repack -adf'
on the Linux kernel.
XP
-----------------------------------------------
MinGW Threads Total Time Speed
-----------------------------------------------
3.4.2 (1T) 00:12:28.422
3.4.2 + nedmalloc (1T) 00:07:25.437 1.68x
3.4.5 (1T) 00:12:20.718
3.4.5 + nedmalloc (1T) 00:07:24.809 1.67x
4.3.3-tdm (1T) 00:12:01.843
4.3.3-tdm + nedmalloc (1T) 00:07:16.468 1.65x
4.3.3-tdm (2T) 00:07:35.062
4.3.3-tdm + nedmalloc (2T) 00:04:57.874 1.54x
Vista
-----------------------------------------------
MinGW Threads Total Time Speed
-----------------------------------------------
4.3.3-tdm (1T) 00:07:40.844
4.3.3-tdm + nedmalloc (1T) 00:07:17.548 1.05x
4.3.3-tdm (2T) 00:05:33.746
4.3.3-tdm + nedmalloc (2T) 00:05:27.334 1.02x
Mac Mini
-----------------------------------------------
GCC Threads Total Time Speed
-----------------------------------------------
i686-darwin9-4.0.1 (2T) 00:09:57.346
i686-darwin9-4.0.1+ned (2T) 00:08:51.072 1.12x
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original readdir implementation was fast, but didn't
support the d_type. This means that git would do additional
lstats for each entry, to figure out if the entry was a
directory or not. This unneedingly slowed down many
operations, since Windows API provides this information
directly when walking the directories.
By running this implementation on Moe's repo structure:
mkdir bummer && cd bummer; for ((i=0;i<100;i++)); do
mkdir $i && pushd $i;
for ((j=0;j<1000;j++)); do echo "$j" >$j; done;
popd;
done
We see the following speedups:
git add .
-------------------
old: 00:00:23(.087)
new: 00:00:21(.512) 1.07x
git status
-------------------
old: 00:00:03(.306)
new: 00:00:01(.684) 1.96x
git clean -dxf
-------------------
old: 00:00:01(.918)
new: 00:00:00(.295) 6.50x
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OpenSSH uses -p to specify custom ports, while PuTTY plink and
TortoisePlink use -P. Git now detects if plink is in GIT_SSH and
modify its flags as necessary.
We call plink with -batch, so that it will error out with an error
message instead of waiting for user input. As reported in msysGit
issue 96, plink wants to interact with the user asking if a host
key should be accepted, but this just blocks the terminal, since
plink tries to get the answer from stdin. However, stdin is
already connected to Git that wants to send input to the remote
command.
But we do not pass -batch to TortoisePlink, because TortoisePlink
uses a GUI to communicate with the user, and it does not understand
-batch.
Signed-off-by: Edward Z. Yang <edwardzyang@thewritingpot.com>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
msysGit issue 258 tracks a problem opening a browser onto file
paths that contain spaces or parentheses when calling the
web--browse script. This patch modifies how the start command is
called to solve this.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows has problems changing the mtime when the file is write protected,
even by the owner of said file.
Add a Windows-only workaround to change the mode if necessary before
trying to change the mtime.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function FillConsoleOutputCharacterA() was pretty content in XP to take a NULL
pointer if we did not want to store the number of written columns. In Windows 7,
it crashes, but only when called from within Git Bash, not from within cmd.exe.
Go figure.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, we have to check whether there are scripts which would
override .exe files, but this check missed the "quietification".
Make now prints 'BUILTIN all' instead of a long chain of 'test || rm'
commands.
[spr: added clarification what make will print. ]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Naturally, prep_temp_blob() did not care about filenames.
As a result, GIT_EXTERNAL_DIFF and textconv generated
filenames such as ".diff_XXXXXX".
This modifies prep_temp_blob() to generate user-friendly
filenames when creating temporary files.
Diffing "name.ext" now generates "XXXXXX_name.ext".
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some systems such as Windows lack libgen.h so provide a
basename() implementation for cross-platform use.
This introduces the NO_LIBGEN_H construct to the Makefile
and autoconf scripts.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mkstemps() is a BSD extension so provide an implementation
for cross-platform use.
Signed-off-by: David Aguilar <davvid@gmail.com>
Tested-by: Johannes Sixt <j6t@kdbg.org> (Windows)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using something like:
$ git push $there 04a8c^2:master
we need to parse 04a8c to find its second parent and then start
discussing what object to send with the other end. "04a8c^2" is a direct
user input and should mean the same commit as git show "04a8c^2" would
give the user, so it obviously needs to obey the replace rules (making
04a8c parsed), but the object transfer should not look at replace at all.
This patch adds some tests to check that the above is working well.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function can be used instead of "usage_with_options" when you
want to print an error message before the usage string.
It may be useful because:
if (condition)
usage_msg_opt("condition is false", usage, opts);
is shorter than:
if (condition) {
fprintf(stderr, "condition is false\n\n");
usage_with_options(usage, opts);
}
and may be more consistent.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the syntax: "git replace <object> <replacement>", so that
"git replace" can now create replace refs. These replace refs
will be used by read_sha1_file to substitute <object> with
<replacement> for most of the commands.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command can only be used now to list replace refs in
"refs/replace/" and to delete them.
The option to list replace refs is "-l".
The option to delete replace refs is "-d".
The behavior should be consistent with how "git tag" and "git branch"
are working.
The code has been copied from "builtin-tag.c" by Kristian Høgsberg
<krh@redhat.com> and Carlos Rica <jasampler@gmail.com> that was itself
based on git-tag.sh and mktag.c by Linus Torvalds.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new "read_replace_refs" global variable is set to 1 by
default, so that replace refs are used by default. But
reachability traversal and packing commands ("cmd_fsck",
"cmd_prune", "cmd_pack_objects", "upload_pack",
"cmd_unpack_objects") set it to 0, as they must work with the
original DAG.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise we get a "sha1 mismatch" error for replaced objects.
Note that I am not sure at all that this is a good change.
It may be that we should just refuse to tag a replaced object. But
in this case we should probably give a meaningfull error message
instead of "sha1 mismatch".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this patch the setup code is very big, but this will be used in
test cases that will be added later.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise we get a "sha1 mismatch" error for replaced objects.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new function will replace "read_sha1_file". This latter function
becoming just a stub to call the former will a NULL "replacement"
argument.
This new function is needed because sometimes we need to use the
replacement sha1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code implementing this mechanism has been copied more-or-less
from the commit graft code.
This mechanism is used in "read_sha1_file". sha1 passed to this
function that match a ref name in "refs/replace/" are replaced by
the sha1 that has been read in the ref.
We "die" if the replacement recursion depth is too high or if we
can't read the replacement object.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is some preparation work for the following patches that are using
the "refs/replace/" ref namespace.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/show-branch-parse-options:
show-branch: migrate to parse-options API
parse-options: add PARSE_OPT_LITERAL_ARGHELP for complicated argh's
Conflicts:
parse-options.h
* jc/mktree:
mktree: validate entry type in input
mktree --batch: build more than one tree object
mktree --missing: updated usage message and man page
mktree --missing: allow missing objects
t1010: add mktree test
mktree: do not barf on a submodule commit
builtin-mktree.c: use a helper function to handle one line of input
mktree: use parse-options
build-in git-mktree
* ew/svn-test-and-old-i18n:
t8005: fix typo, it's ISO-8859-5, not KOI8-R
t8005: convert CP1251 character set to ISO8859-5
t8005: use more portable character encoding names
t5100: use ancient encoding syntax for backwards compatibility
t9301: use ISO8859-1 rather than ISO-8859-1
t3901: Use ISO8859-1 instead of ISO-8859-1 for backward compatibility
t3901: avoid negation on right hand side of '|'
builtin-mailinfo.c: use "ISO8859-1" instead of "latin1" as fallback encoding
builtin-mailinfo.c: compare character encodings case insensitively
Use 'UTF-8' rather than 'utf-8' everywhere for backward compatibility
t3900: use ancient iconv names for backward compatibility
* mw/send-email:
send-email: Remove superfluous `my $editor = ...'
send-email: 'References:' should only reference what is sent
send-email: Handle "GIT:" rather than "GIT: " during --compose
Docs: send-email: --smtp-server-port can take symbolic ports
Docs: send-email: Refer to CONFIGURATION section for sendemail.multiedit
Docs: send-email: Put options back into alphabetical order
* 'cc/bisect' (early part):
bisect: check ancestors without forking a "git rev-list" process
commit: add function to unparse a commit and its parents
bisect: rework some rev related functions to make them more reusable
When a path F that matches ignore pattern has a conflict, "git add F"
insisted the -f option be given, which did not make sense. It would have
required -f when the path was originally added, but when resolving a
conflict, it already is tracked.
So this should work (and does):
$ echo file >.gitignore
$ echo content >file
$ git add -f file ;# need -f because we are adding new path
$ echo more content >>file
$ git add file ;# don't need -f; it is not actually an "other" file
This is handled under the hood by the COLLECT_IGNORED option to
read_directory. When that code finds an ignored file, it checks the
index to make sure it is not actually a tracked file. However, the test
it uses does not take into account unmerged entries, and considers them
to still be ignored. "git ls-files" uses a more elaborate test and gets
the right answer and the same test should be used here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the description of "--ignore-errors" from git-add.txt as
inspiration.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent commits 8763dbb1 (completion: fix PS1 display during a
merge on detached HEAD, 2009-05-16), ff790b6a (completion: simplify
"current branch" in __git_ps1(), 2009-05-10), and d7107ca6
(completion: fix PS1 display during an AM on detached HEAD,
2009-05-26) ensure that the branch name in __git_ps1() is always set
to something sensible. Therefore, the condition for checking the
non-empty branch name is always fulfilled, and can be removed.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patch can be applied to the work tree, the index or both, but the
short description made it look like it's always applied to both.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This resolves a semantic conflicts early to work with 5ae93df (t3900: use
ancient iconv names for backward compatibility, 2009-05-18).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-add-p-coalesce-fix:
t3701: ensure correctly set up repository after skipped tests
Revert "git-add--interactive: remove hunk coalescing"
Splitting a hunk that adds a line at the top fails in "add -p"
The test still passes when SVN_HTTPD_PORT is not set. Futhermore, t9115
and t9118 don't check if SVN_HTTPD_PORT is set even though they both use
start_httpd() from lib-git-svn.sh. Admittedly, the test is not very
meaningful without SVN_HTTPD_PORT, as commit f5530b (support for funky
branch and project names over HTTP(S) 2007-11-11) states that the URI
escaping is only done over HTTP(S).
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes commands such as `git for-each-ref --format='%(refname)'`,
which are used heavily by the bash_completion code, run about 6 times
faster on an uncached repository (3 s intead of 18 s on my linux-2.6
repository with several remotes).
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can avoid a GNU dependency by using /usr/ucb/install.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a file X is removed from CVS, it goes into the Attic directory, and CVS
reports it as 'no file X' but with status 'Up-to-date'. cvsexportcommit
misinterprets this as an existing file and tries to commit a file with the
same name. Correctly identify these files, so that new files with the
same name can be committed.
Add a test to t9200-git-cvsexportcommit.sh, which tests that we can
re-commit a removed filename which remains in CVS's attic. This adds a
file 'attic_gremlin' in CVS, then "removes" it, then tries to commit a
file with the same name from git.
Signed-off-by: Nick Woolley <git.wu-lee@noodlefactory.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support StGIT patches by implementing a simple perl-based converter
mimicking StGIT's own parse_patch. Also support StGIT patch series by
'exploding' the index into a list of files and re-running the mail
splitting with patch_format set to stgit.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Default to mbox format if input is from stdin. Otherwise, look at the
first few lines of the first patch to try to guess its format.
Include checks for mailboxes, stgit patch series, stgit single patches
and hg patches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set up a framework to allow git-am to support patches which are not in
mailbox format. Introduce a patch_format variable that presently can
only be set from the command line, defaulting to 'mbox' (the only
supported format) if not specified.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously "git diff-tree --pretty COMMIT" was run using
"run_command_v_opt" to display information about the first bad
commit.
The goal of this patch is to avoid a "fork" and an "exec" call
when displaying that information.
To do that, we manually setup revision information as
"git diff-tree --pretty" would do it, and then use the
"log_tree_commit" function.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
...without i18n.commitencoding set in the config.
SVN tries to store all commit messages in UTF-8, however it is
up to the job of the clients to enforce this rule. SVN servers
themselves do not always enforce this; allowing clients to
commit malformed UTF-8 messages and break repositories.
So git-svn will enforce this and tell the user to set
i18n.commitencoding when a git commit is is not in UTF-8.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The goal of this patch series is to check if good revisions are
ancestor of the bad revision without forking a process to launch
"git rev-list $good ^$bad".
This new version of this patch series does not use an "unparse_commit"
function anymore, we use "clear_commit_marks" instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code outside of the test harness was emitting "Initializing..." from
git-init. Fixup this test to be more modern:
- test_expect_object_count() and count_objects() are unused
- use grep directly instead of test "..." = $(grep ...)
- end the test_expect_success line with a single-quote and put the
test on a new line
- put as much code inside the test harness as possible
- no_strict_count_check is unused and duplicates the test
"new object count"
- use && whenever possible to catch errors early
- use test_tick instead of GIT_AUTHOR_DATE=$sec
- remove debugging aid log.txt
- use subshells instead of cd-ing around
Also merge the pull test into one large test.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a companion patch to previous 8763dbb (completion: fix PS1 display
during a merge on detached HEAD, 2009-05-16). While rebasing or running am
on a detached HEAD, the code failed to set $b (branch description) that
enables the whole status display business.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add IPv6 support by implementing name resolution with the
protocol agnostic getaddrinfo(3) API. The old gethostbyname(3)
code is still available when git is compiled with NO_IPV6.
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/unlink-err:
print unlink(2) errno in copy_or_link_directory
replace direct calls to unlink(2) with unlink_or_warn
Introduce an unlink(2) wrapper which gives warning if unlink failed
cat-file with an object on the command line requires an
option to tell it what to output (type, size, pretty-print,
etc). However, the square brackets in the usage imply that
those options are not required. This patch switches them to
parentheses to indicate "required but grouped-OR" (curly
braces might also work, but this follows the convention used
already by "git stash").
While we're at it, let's change the <sha1> specifier in the
usage to <object>. That's what the documentation uses, and
it does actually use the regular object lookup.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fail to store a fetched ref, we recommend that the
user try running "git prune" to remove up any old refs that
have been deleted by the remote, which would clear up any DF
conflicts. However, ref storage might fail for other
reasons (e.g., permissions problems) in which case the
advice is useless and misleading.
This patch detects when there is an actual DF situation and
only issues the advice when one is found.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the ways that locking might fail is that there is a
DF conflict between two refs (e.g., you want to lock
"foo/bar" but "foo" already exists). In this case, we return
an error, but there is no way for the caller to know the
specific problem.
This patch sets errno to ENOTDIR, which is the most sensible
code. It's what we would see if the refs were stored purely
in the filesystem (but these days we must check the
namespace manually due to packed refs).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When find-copies-harder is in effect, the diff frontends are expected to
feed all paths, not just changed paths, to the diffcore, so that copy
sources can be picked up. In such a case, not descending into subtrees
using the cache-tree information is simply wrong.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running "diff-index --cached" after making a change to only a small
portion of the index, there is no point unpacking unchanged subtrees into
the index recursively, only to find that all entries match anyway. Tweak
unpack_trees() logic that is used to read in the tree object to catch the
case where the tree entry we are looking at matches the index as a whole
by looking at the cache-tree.
As an exercise, after modifying a few paths in the kernel tree, here are
a few numbers on my Athlon 64X2 3800+:
(without patch, hot cache)
$ /usr/bin/time git diff --cached --raw
:100644 100644 b57e1f5... e69de29... M Makefile
:100644 000000 8c86b72... 0000000... D arch/x86/Makefile
:000000 100644 0000000... e69de29... A arche
0.07user 0.02system 0:00.09elapsed 102%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+9407minor)pagefaults 0swaps
(with patch, hot cache)
$ /usr/bin/time ../git.git/git-diff --cached --raw
:100644 100644 b57e1f5... e69de29... M Makefile
:100644 000000 8c86b72... 0000000... D arch/x86/Makefile
:000000 100644 0000000... e69de29... A arche
0.02user 0.00system 0:00.02elapsed 103%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+2446minor)pagefaults 0swaps
Cold cache numbers are very impressive, but it does not matter very much
in practice:
(without patch, cold cache)
$ su root sh -c 'echo 3 >/proc/sys/vm/drop_caches'
$ /usr/bin/time git diff --cached --raw
:100644 100644 b57e1f5... e69de29... M Makefile
:100644 000000 8c86b72... 0000000... D arch/x86/Makefile
:000000 100644 0000000... e69de29... A arche
0.06user 0.17system 0:10.26elapsed 2%CPU (0avgtext+0avgdata 0maxresident)k
247032inputs+0outputs (1172major+8237minor)pagefaults 0swaps
(with patch, cold cache)
$ su root sh -c 'echo 3 >/proc/sys/vm/drop_caches'
$ /usr/bin/time ../git.git/git-diff --cached --raw
:100644 100644 b57e1f5... e69de29... M Makefile
:100644 000000 8c86b72... 0000000... D arch/x86/Makefile
:000000 100644 0000000... e69de29... A arche
0.02user 0.01system 0:01.01elapsed 3%CPU (0avgtext+0avgdata 0maxresident)k
18440inputs+0outputs (79major+2369minor)pagefaults 0swaps
This of course helps "git status" as well.
(without patch, hot cache)
$ /usr/bin/time ../git.git/git-status >/dev/null
0.17user 0.18system 0:00.35elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+5336outputs (0major+10970minor)pagefaults 0swaps
(with patch, hot cache)
$ /usr/bin/time ../git.git/git-status >/dev/null
0.10user 0.16system 0:00.27elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+5336outputs (0major+3921minor)pagefaults 0swaps
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one of the oldest scripts; update it to match more modern style.
Notably, we should:
- Put the test title on the same line as the "test_expect_success", and
end the line with a single-quote to begin the body of the test which is
one multi-line string; and
- Run as many commands inside test_expect_success, not outside, to catch
unexpected breakages.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier cache_tree_find() needs to be called with a valid cache_tree,
but repeated look-up may find an invalid or missing cache_tree in between.
Help simplify the callers by returning NULL to mean "nothing appropriate
found" when the input is NULL.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This particular readlink call never NUL-terminated its
result, making it a potential source of bugs (though there
is no bug now, as it currently always respects the length
field). Let's just switch it to strbuf_readlink which is
shorter and less error-prone.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two tests that are skipped if file modes are not obeyed by the
file system. In this case, the subsequent test failed because the
repository was in an unexpected state. This corrects it.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the --squash option, merge sets up the index just like for a real
merge, but without the merge info (stages). Say so.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dbd0f5c (Files given on the command line are relative to $cwd,
2008-08-06) introduced parse_options_fix_filename() as a minimal fix.
OPT_FILENAME is intended to be a more robust fix for the same issue.
OPT_FILENAME and its associated enum OPTION_FILENAME are used to
represent filename options within the parse options API.
This option is similar to OPTION_STRING. If --no is prefixed to the
option the filename is unset. If no argument is given and the default
value is set, the filename is set to the default value. The difference
is that the filename is prefixed with the prefix passed to
parse_options() (or parse_options_start()).
Update git-apply, git-commit, git-fmt-merge-msg, and git-tag to use
OPT_FILENAME with their filename options. Also, rename
parse_options_fix_filename() to fix_filename() as it is no longer
extern.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To give OPT_FILENAME the prefix, we pass the prefix to parse_options()
which passes the prefix to parse_options_start() which sets the prefix
member of parse_opts_ctx accordingly. If there isn't a prefix in the
calling context, passing NULL will suffice.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/mktree:
mktree: validate entry type in input
mktree --batch: build more than one tree object
mktree --missing: updated usage message and man page
mktree --missing: allow missing objects
t1010: add mktree test
mktree: do not barf on a submodule commit
builtin-mktree.c: use a helper function to handle one line of input
mktree: use parse-options
build-in git-mktree
* sb/show-branch-parse-options:
show-branch: migrate to parse-options API
parse-options: add PARSE_OPT_LITERAL_ARGHELP for complicated argh's
Conflicts:
parse-options.h
* master: (654 commits)
http-push.c::remove_locks(): fix use after free
t/t3400-rebase.sh: add more tests to help migrating git-rebase.sh to C
post-receive-email: hooks.showrev: show how to include both web link and patch
MinGW: Fix compiler warning in merge-recursive
MinGW: Add a simple getpass()
MinGW: use POSIX signature of waitpid()
MinGW: the path separator to split GITPERLLIB is ';' on Win32
MinGW: Scan for \r in addition to \n when reading shbang lines
gitweb: Sanitize title attribute in format_subject_html
Terminate argv with NULL before calling setup_revisions()
doc/git-rebase.txt: remove mention of multiple strategies
git-send-email: Handle quotes when parsing .mailrc files
git-svn: add --authors-prog option
git-svn: Set svn.authorsfile if it is passed to git svn clone
git-svn: Correctly report max revision when following deleted paths
git-svn: Fix for svn paths removed > log-window-size revisions ago
git-svn testsuite: use standard configuration for Subversion tools
grep: fix word-regexp colouring
completion: use git rev-parse to detect bare repos
Cope better with a _lot_ of packs
...
xdl_merge used to have a check to ensure that there was at least
some change in one or other side being merged but this suppressed
output for the degenerate case when base, local and remote
contents were all identical.
Removing this check enables correct output in the degenerate case
and xdl_free_script handles freeing NULL scripts so there is no
need to have the check for these calls.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case that merge-file is passed three files with identical
contents it wipes the contents of the output file instead of
leaving it unchanged.
Althought merge-file is porcelain and this will never happen in
normal usage, it is still wrong.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When clicked, the option --simplify-by-decoration is added to gitk/git log.
This yields to a simplified history where only decorated commits are shown,
i.e. those with a yellow tag or a green branch flag.
Signed-off-by: Dirk Suesserott <newsletter@dirk.my1.cc>
Signed-off-by: Paul Mackerras <paulus@samba.org>
When there are duplicated slashes in pathnames, like this:
--- a/perl//Git.pm
+++ b/perl//Git.pm
@@ -1358,3 +1358,4 @@
1; # Famous last words
+# test
the paths gleaned from the patch header won't be found in the index and
cause "apply --index" and "apply --cached" to fail.
Fix this by squashing the duplicated slashes upon input.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Araxis merge is now a built-in diff/merge tool.
This adds araxis to git-completion and updates
the documentation to mention araxis.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These new tests make sure I don't miss any check being performed before
rebase is proceeded (which is well tested by other tests)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After bol is forwarded, it doesn't represent the beginning of the line
any more. This means that the beginning-of-line marker (^) mustn't match,
i.e. the regex flag REG_NOTBOL needs to be set.
This bug was introduced by fb62eb7fab
("grep -w: forward to next possible position after rejected match").
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dbd0f5c7 (Files given on the command line are relative to $cwd,
2008-08-06) only fixed git-commit and git-tag. But, git-apply and
git-fmt-merge-msg didn't get the update and exhibit the same behavior.
Fix them and add tests for "apply --build-fake-ancestor" and
"fmt-merge-msg -F".
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dbd0f5c7 (Files given on the command line are relative to $cwd,
2008-08-06) introduced parse_options_fix_filename() as a quick fix for
filename arguments used in the parse options API.
git-commit was still broken. This means
git commit -F log -t temp
in a subdirectory would make git think the log message should be taken
from temp instead of log.
This is because parse_options_fix_filename() calls prefix_filename()
which uses a single static char buffer to do its work. Making two calls
with two char pointers causes the pointers to alias. To prevent
aliasing, we duplicate the string returned by
parse_options_fix_filename().
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a comment showing how to include a web link (i.e. gitweb/cgit)
and a patch in the email that is sent for each pushed commit.
The quoting was tricky enough that it's worth documenting. To add
two blank lines (i.e. put \n\n in the printf), you would need to
say \\\\n\\\\n, and in the end, the pair of "echo" statements seemed
better. This is used in glibc.git repository:
http://sources.redhat.com/git/gitweb.cgi?p=glibc.git;a=summary
push-triggered messages have been sent to this list since May 21:
http://sourceware.org/ml/glibc-cvs/2009-q2/
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GCC 4.4.0 on Windows does not like the format %zu. It is quite unlikely,
though, that we need more merge bases than a %d can display, so replace
the %zu by a %d.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need getpass() to activate curl on MinGW. Although the default
Makefile currently has 'NO_CURL = YesPlease', msysgit releases do
provide curl support, so getpass() is used.
[spr: - edited commit message.
- squashed commit that provides getpass() declaration.]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
\r is common on Windows, so we should handle it gracefully.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-cleanup:
gitweb: Remove unused $hash_base parameter from normalize_link_target
gitweb: Simplify snapshot format detection logic in evaluate_path_info
gitweb: Use capturing parentheses only when you intend to capture
gitweb: Replace wrongly added tabs with spaces
gitweb: Use block form of map/grep in a few cases more
gitweb: Always use three argument form of open
gitweb: Always use three argument form of open
gitweb: Do not use bareword filehandles
* 'cc/bisect' (early part):
bisect: make "git bisect" use new "--next-all" bisect-helper function
bisect: add "check_good_are_ancestors_of_bad" function
bisect: implement the "check_merge_bases" function
bisect: automatically sort sha1_array if needed when looking it up
bisect: make skipped array functions more generic
bisect: remove too much function nesting
bisect: use new "struct argv_array" to prepare argv for "setup_revisions"
bisect: store good revisions in a "sha1_array"
bisect: implement "rev_argv_push" to fill an argv with revs
bisect: use "sha1_array" to store skipped revisions
am: simplify "sq" function by using "git rev-parse --sq-quote"
bisect: use "git rev-parse --sq-quote" instead of a custom "sq" function
rev-parse: add --sq-quote to shell quote arguments
rev-list: remove stringed output flag from "show_bisect_vars"
bisect--helper: remove "--next-vars" option as it is now useless
bisect: use "git bisect--helper --next-exit" in "git-bisect.sh"
bisect--helper: add "--next-exit" to output bisect results
bisect: move common bisect functionality to "bisect_common"
rev-list: refactor printing bisect vars
rev-list: make "estimate_bisect_steps" non static
In git-compat-util.h, we do
#define _XOPEN_SOURCE 600
#define _XOPEN_SOURCE_EXTENDED 1
unless we are on BSD or SCO.
On OpenSolaris (200811), /usr/include/sys/feature_tests.h has this nice
table:
Feature Test Macro Specification
------------------------------------------------ -------------
_XOPEN_SOURCE XPG3
_XOPEN_SOURCE && _XOPEN_VERSION = 4 XPG4
_XOPEN_SOURCE && _XOPEN_SOURCE_EXTENDED = 1 XPG4v2
_XOPEN_SOURCE = 500 XPG5
_XOPEN_SOURCE = 600 (or POSIX_C_SOURCE=200112L) XPG6
Later in the same header, compilation with -c99 is made to fail if _XPG6 is
not set, like this:
#if defined(_STDC_C99) && (defined(__XOPEN_OR_POSIX) && !defined(_XPG6))
#error "Compiler or options invalid for pre-UNIX 03 X/Open applications \
and pre-2001 POSIX applications"
#elif ...
The problem is that they check things in an order that is inconvenient for
us. When they see _XOPEN_SOURCE_EXTENDED, they declare that we are XPG4v2,
regardless of the value of _XOPEN_SOURCE.
To work around this problem, do not define _XOPEN_SOURCE_EXTENDED on
Sun's.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note that "-g" no longer uses an equals '=' sign for its optional
arguments, but "--reflog" still does. This is normal behavior for parse
options, as arguments to "-g" are put immediately after the option with
no space.
For example
git show-branch -g=4
is now
git show-branch -g4
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually, the argh element in struct option points at a placeholder value
(e.g. "val"), and is shown in the usage message as
--option=<val>
by enclosing the string inside of angle brackets.
When the option is more complex (e.g. optional arguments separated by a
comma), you would want to produce a usage message that looks like
--option=<val1>[,<val2>]
In such a case, the caller can pass a string to argh with placeholders
already enclosed in necessary angle brackets (e.g. "<val1>[,<val2>]")
and set this flag.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On IRIX 6.5 CP1251 is unknown, but WIN1251 (which seems to be a
non-standard name) is known. On Solaris 10, the opposite is true. Solaris
also knows CP1251 as WINDOWS-1251, but this too is not recognized on IRIX.
I could not find a name that both platforms recognized for this character
set.
An alternative character set which covers the same alphabet seems to be the
ISO8859-5 character set. Both platforms support this character set, so use
it instead.
This allows t8005.4 to pass on Solaris 7, and part of the test to pass on
IRIX. (My IRIX can't convert SJIS to UTF-8 :(
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms do not have an extensive list of alternate names for
character encodings.
Solaris 7 does not know about shift-jis, but does know SJIS. It also does
not know that utf-8 and UTF-8 refer to the same encoding.
With the above in mind, the following conversions were performed:
utf-8 --> UTF-8
shift-jis --> SJIS
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace control characters with question mark '?' (like in
chop_and_esc_str).
A little background: some web browsers turn on strict (and
unforgiving) XML validating mode for XHTML documents served using
application/xhtml+xml content type. This means among others that
control characters are forbidden to appear in gitweb output.
CGI.pm does by default slight escaping (using simple_escape subroutine
from CGI::Util) of all _attribute_ values (depending on the value of
autoEscape, by default on). This escaping, at least in CGI.pm version
3.10 (most current version at CPAN is 3.43), is minimal: only '"',
'&', '<' and '>' are escaped using named HTML entity references
(", &, < and > respectively). But simple_escape does
not do escaping of control characters such as ^X which are invalid in
XHTML (in strict mode).
If by some accident commit message do contain some control character
in first 50 characters (more or less) of first line of commit message,
and this line is longer than 50 characters (so gitweb shortens it for
display), then gitweb would put this control character in title
attribute (and CGI.pm would not remove them). The tag _contents_ is
safe because it is escaped using esc_html() explicitly, and it
replaces control characters by their printable representation.
While at it: chop_and_escape_str doesn't need capturing group.
Noticed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is convention that argv should be terminated with NULL, even if
argc is used to specify the size of argv. setup_revisions() requires
this and may segfault otherwise.
This patch makes sure that all argv (that I can find) is NULL terminated.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.bogomips.org/git-svn:
git-svn: add --authors-prog option
git-svn: Set svn.authorsfile if it is passed to git svn clone
git-svn: Correctly report max revision when following deleted paths
git-svn: Fix for svn paths removed > log-window-size revisions ago
git-svn testsuite: use standard configuration for Subversion tools
It is legal and not uncommon to use quotes in a .mailrc file so
you can include a persons fullname as well as their email alias.
Handle this by using quotewords instead of split when parsing
.mailrc files.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new option, --authors-prog, to git-svn that allows a more flexible
alternative (or supplement) to --authors-file. This allows more
advanced username operations than the authors file will allow. For
example, one may look up Subversion users via LDAP, or may generate the
name and email address from the Subversion username.
Notes:
* If both --authors-name and --authors-prog are given, the former is
tried first, falling back to the later.
* The program is called once per unique SVN username, and the result is
cached.
* The command-line argument must be the path to a program, not a generic
shell command line. The absolute path to this program is taken at
startup since the git-svn script changes directory during operation.
* The option is not enabled for `git svn log'.
[ew: fixed case where neither --authors-(name|prog) were defined]
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Report the maximum found revision in the range, instead of the minimum
changed revision.
Signed-off-by: Alex Vandiver <alexmv@mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Instead of trying to find the end of the commit history only in the
last window, track if we have seen commits yet, and use that to judge
if we need to backtrack and look for a tail. Otherwise, conversion
can silently lose up to 100 revisions of a branch if it was deleted
>100 revisions ago.
Signed-off-by: Alex Vandiver <alexmv@mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
I have tweaked configuration in my ~/.subversion directory, namely I am
running auto-properties and automatically adding '$Id$' expansion to
every file. This choke the last test named 'proplist' from
t9101-git-svn-props.sh, because one more property, svn:keywords is
automatically added.
I had just wrapped svn invocation with the svn_cmd that specifies empty
directory via --config-dir argument. Since the latter is the global
option, it should be recognized by all svn subcommands, so no
regressions will be introduced.
Now svn_cmd is used everywhere, not just in the failed test module: this
should guard us from the future clashes with user-defined configuration
tweaks.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Acked-by: Eric Wong <normalperson@yhbt.net>
* maint:
grep: fix word-regexp colouring
completion: use git rev-parse to detect bare repos
Cope better with a _lot_ of packs
for-each-ref: fix segfault in copy_email
As noticed by Dmitry Gryazin: When a pattern is found but it doesn't
start and end at word boundaries, bol is forwarded to after the match and
the pattern is searched again. When a pattern is finally found between
word boundaries, the match offsets are off by the number of characters
that have been skipped.
This patch corrects the offsets to be relative to the value of bol as
passed to match_one_pattern() by its caller.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Its check is more robust than a config check for core.bare
Trivially-Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You might end up with a situation where you have tons of pack files, e.g.
when using hg2git. In this situation, all kinds of operations may
end up with a "too many files open" error. Let's recover gracefully from
that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Looks-right-to-me-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suggested by Stephen Boyd: make the callback functions used for option
parsing static.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows you to discard the cache-tree information before writing the
tree out of the index (i.e. it always recomputes the tree object names for
all the subtrees).
This is only useful as a debug option, so I did not bother documenting it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can trigger a segfault in git.git by doing:
git for-each-ref --format='%(taggeremail)' refs/tags/v0.99
The v0.99 tag is special in that it contains no "tagger"
header.
The bug is obvious in copy_email, which carefully checks to
make sure the result of a strchr is non-NULL, but only after
already having used it to perform other work. The fix is to
move the check up.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the moment non-ascii encodings of filenames are not portably
converted between different filesystems by git. This will most likely
change in the future but to allow repositories to be portable among
different file/operating systems this check is enabled by default.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our hash_obj and hashtable_index calls and functions were doing a lot of
funny things with signedness. Unify all of it to 'unsigned int'.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some ancient platforms do not have an extensive list of alternate names for
character encodings. For example, Solaris 7 does not know that ISO-8859-1
is the same as ISO8859-1. Modern platforms do know this, so use the older
names.
The following conversions were performed:
ISO-8859-1 --> ISO8859-1
ISO-8859-2 --> ISO8859-2
ISO-8859-8 --> ISO8859-8
iso-2022-jp --> ISO-2022-JP
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some ancient platforms do not have an extensive list of alternate names for
character encodings. For example, Solaris 7 does not know that ISO-8859-1
is the same as ISO8859-1. Modern platforms do know this, so use the older
name.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some ancient platforms do not have an extensive list of alternate names for
character encodings. For example, Solaris 7 does not know that ISO-8859-1
is the same as ISO8859-1. Modern platforms do know this, so use the older
name.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some shells do not properly handle constructs of the form:
spew_something | ! process_input
So rewrite this to be:
spew_something | process_input; test $? != 0
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms do not understand the character encoding "latin1" which is
another name for "ISO8859-1". So use "ISO8859-1" instead which all tested
platforms understand.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When converting between character encodings, git tests whether the "from"
encoding and the "to" encoding have the same name. git should perform this
test case insensitively so that e.g. utf-8 is not seen as a different
encoding than UTF-8.
Additionally, it is not necessary to call tolower() anymore on the encodings
extracted from the mail message.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some ancient platforms (Solaris 7, IRIX 6.5) do not understand 'utf-8', but
all tested implementations understand 'UTF-8'.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some old iconv implementations do not have many alternate names and/or
do not match character encoding names case insensitively. These
implementations can not tell that utf-8 and UTF-8 are the same encoding
and fail when trying to do the conversion. So use the old names, which
modern implementations still support.
The following conversions were performed:
utf-8 --> UTF-8
ISO-8859-1 --> ISO8859-1
EUCJP --> eucJP
Also update t9129 and t9500 which make use of the test files in t/t3900.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
msysGit generates version strings with text appended which cannot
be used with vcompare; trying to use them generates a Tcl error.
Limit git_version to the first three digits which are the real git
version to avoid this error.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
* ar/unlink-err:
print unlink(2) errno in copy_or_link_directory
replace direct calls to unlink(2) with unlink_or_warn
Introduce an unlink(2) wrapper which gives warning if unlink failed
* mh/show-branch-color:
bash completion: show-branch color support
show-branch: color the commit status signs
Conflicts:
contrib/completion/git-completion.bash
We must save the pending commits that will be used during revision
walking and unparse them after, because we want to leave a clean
state for the next revision walking that will try to find the best
bisection point.
As we don't fork a process anymore to call "git rev-list", we need
to remove the use of GIT_TRACE to check how "git rev-list" is
called from the t6030 test that uses it.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds the "unparse_commit" function that returns a commit
into an unparsed state by freeing its data and resetting its fields
to 0.
Its parents are recursively unparsed too, because they might have
been changed. But its tree is not unparsed as it should not have
been modifed.
Note that as the "flags" and "used" fields may be used even if the
object is not parsed, we have to reset them anyway.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patches changes the "bisect_rev_setup" and "bisect_common"
functions to make it easier to reuse them in a later patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 76a44c5 (show-branch --reflog: show the reflog message at the
top, 2007-01-19) introduced parse_reflog_param(). The die() call was
incorrectly passed arg + 9, when it should have been passed arg.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
completion: add missing options to show-branch and show
dir.c: clean up handling of 'path' parameter in read_directory_recursive()
Fix type-punning issues
Add --oneline and --abbrev-commit to show and --sparse to show-branch.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now we pass two different pathnames ('path' and 'base') down to
read_directory_recursive(), and the only real reason for that is that we
want to allow an empty 'base' parameter, but when we do so, we need the
pathname to "opendir()" to be "." rather than the empty string.
And rather than handle that confusion in the caller, we can just fix
read_directory_recursive() to handle the case of an empty path itself,
by just passing opendir() a "." ourselves if the path is empty.
This would allow us to then drop one of the pathnames entirely from the
calling convention, but rather than do that, we'll start separating them
out as a "filesystem pathname" (the one we use for filesystem accesses)
and a "git internal base name" (which is the name that we use for git
internally).
That will eventually allow us to do things like handle different
encodings (eg the filesystem pathnames might be Latin1, while git itself
would use UTF-8 for filename information).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In these two places we are casting part of our unsigned char sha1 array into
an unsigned int, which violates GCCs strict-aliasing rules (and probably
other compilers).
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
test: checkout shouldn't say that HEAD has moved if it didn't
completion: enhance "current branch" display
completion: simplify "current branch" in __git_ps1()
completion: fix PS1 display during a merge on detached HEAD
builtin-checkout: Don't tell user that HEAD has moved before it has
pre-commit.sample: don't print incidental SHA1
tests: Add tests for missing format-patch long options
api-parse-options.txt: use 'func' instead of 'funct'
Turn on USE_ST_TIMESPEC for OpenBSD
ls-tree manpage: output of ls-tree is compatible with update-index
ls-tree manpage: use "unless" instead of "when ... is not"
Introduce GIT_PS1_DESCRIBE option you can set to "contains", "branch", or
"describe" to tweak the way how a detached HEAD is described.
The default behaviour is to describe only exact match with some tag
(otherwise use the first 7 hexdigits) as before.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As I very often work on a detached HEAD, I found it pretty confusing
when __git_ps1() said 'some-name'. Did I create a branch with that name
by mistake, or do I happen to be on a commit with that exact tag?
This patch fixes the issue by enclosing non branch names in a pair of
parentheses when used to substitute %s token in __git_ps1() argument.
It also fixes a small bug where the branch part is left empty when
.git/HEAD is unreadable for whatever reason. The output now says
"(unknown)".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If your merge stops in a conflict while on a detached HEAD, recent
completion code fails to show anything. This was because various cases
added to support the operation-in-progress markers (e.g. REBASE, MERGING)
forgot that they need to set the variable "b" to something for the result
they computed to be displayed at all.
Probably not many people make trial merges on a detached HEAD (which is
tremendously useful feature of git, by the way), and that may be why this
was not noticed for a long time.
Acked-By: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Strip leading and trailing spaces off guessed target directory, and
replace sequences of whitespace and 'control' characters with one
space character.
User still can have any name by specifying it explicitely after url.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An old iconv (GNU libiconv 1.11) does not know about utf8, it does know
UTF-8 though, which is also understood by all newer iconv implementations.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 0beee4c6de but with a
bit of twist, as we have added "edit hunk manually" hack and we cannot
rely on the original line numbers of the hunks that were manually edited.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Splitting a hunk into two in add -p doesn't work for a diff that adds a
new line at the top of the file with other add in the same hunk.
Signed-off-by: Matthew Graham <mdg149@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, checkout would tell the user this message before moving HEAD,
without regard to whether the upcoming move will result in success.
If the move failed, this causes confusion.
Show the message after the move, unless the move failed.
Signed-off-by: Daniel Cordero <theappleman@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the sample pre-commit hook script discard
all git-rev-parse output, not just stderr.
Otherwise, it would print an SHA1.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exercise format-patch's --signoff, --in-reply-to and --start-number long
options.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously mktree would accept tree entries which had a mismatch between
the declared type and the actual type of object. Check the actual type of
the object when it is available locally.
Signed-off-by: Josh Micich <josh.micich@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option works in a similar way to the '--batch' option of 'git cat-file'.
It enables creation of many tree objects with a single process.
The change was motivated by performance considerations in applications that
need to create many tree objects. A non-rigorous test showed tree creation
times improved from (roughly) 200ms to 50ms.
Signed-off-by: Josh Micich <josh.micich@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update usage message in builtin-mktree.c to include '--missing'. Do the
same to man page and clarify that the input does not have to be sorted.
Signed-off-by: Josh Micich <josh.micich@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like Darwin, OpenBSD's stat struct uses st_ctimespec and st_mtimestruct
rather than st_ctim and st_mtim.
Signed-off-by: Tony Kemp <tony.kemp@newcastle.edu.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 218a900bd8 added a number of new
individual fields for the Edit View dialog to make them more accessible
to end users, while still allowing all options to be specified in the
"arguments to git log" field. This extends the dialog further, to
include refs, author, committer, commit message, and patch contents.
As before everything still remains accessible from the "arguments to
git log" input field.
Additionally, this provides hints for the format of the various input
fields (for example, listing some sample date strings in different
formats), and puts related query items into subsections to make it
easier to digest the number of options that exist.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Commit 785b7535 ("gitk: use --textconv to generate diff text")
added the --textconv flag to the git diff commands used to
display commit diffs. Since some people use newer gitk with older
git installations, this adds a check on the git version to check
that it understands --textconv before using it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
For the most part gitk's focus is on showing history and changes in
a human readable form. For this reason, it makes sense to generate
the patch text in the diff view using --textconv so that textconv
drivers are used if they are defined.
gitk can also generate patches, but we do not use --textconv because
such patches could not be applied.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
stat_tracking_info() assumes that upstream references (as specified by
--track or set up automatically) are commits. By calling lookup_commit()
on them, create_objects() creates objects for them with type commit no
matter what their real type is; this disturbs lookup_tag() later on in the
call sequence, leading to git status, git branch -v and git checkout
erroring out.
Fix this by using lookup_commit_reference() instead so that (annotated)
tags can be used as upstream references.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sender address, as specified with the '--from' command line option,
couldn't be set in the config file. So add a new config option,
'sendemail.from', which sets it. One can use 'sendemail.<identity>.from'
as well of course, which is likely the more useful case.
The sender address would default to GIT_AUTHOR_IDENT, which is usually the
right thing, but this doesn't allow switching based on the identity
selected. It's possible to switch the SMTP server and envelope sender by
using the '--identity' option, in which case one probably wants to use a
different from address as well, but this had to be manually specified.
The documentation for 'from' is also corrected somewhat. If '--from' is
specified (or the new sendemail.from option is used) then the user isn't
prompted. The default with no '--from' option (or sendemail.from option)
is GIT_AUTHOR_IDENT first then GIT_COMMITTER_IDENT, not just
GIT_COMMITTER_IDENT.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the installed programs are tar'ed up and installed on a system where
bin/ and libexec/git-core/ live on different file systems, we do not want
libexec/git-core/git-* to be hardlinks to bin/git.
Noticed by Cedric Staniewski.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-checkout and git-branch allow setting up an arbitrary committish as
the upstream reference for --track. In particular, tags are allowed. But
they and git-status barf on non-commit upstreams as soon as they are
asked for trackings stats.
Expose this shortcoming by adding two tests: annotated tags are affected
but lightweight tags are OK.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fmt-merge-msg does a strong syntax checking of its input and fails
with if it is incorrect. The LF character is the only character
important for fmt-merge-msg. As the url in FETCH_HEAD plays only
informational role, a quoted representation of the url should be good
and true enough.
The url often comes from either user-editable config or command line,
so it is reasonable to expect all kinds of characters in it, including
the characters which the format of FETCH_HEAD considers special (line
separator in this case).
Noticed and reported by Hugo Mildenberger.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git check-ref-format' checks for the presence of at least one '/', the
idea being that there should be no refs directly below 'refs/', so there
should be a category like 'heads/' or 'tags/' in a refname.
Try and make this clearer in the man page.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it easier for users to get and unset their configuration
variables without having to open documentation or dig through their
configuration file.
__git_config_get_set_variables() retrieves the set configuration
variables from the appropriate configuration file. For example, if
the user has previously specified --global only the global variables
are returned. The same applies for --system, and --file. If no
location has been specified, all set variables are returned.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
...since it was decided for normalize_link_target to only mangle
pathname, and do not try to check if target is present in $hash_base
tree, for performance reasons.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This issue was caught by perlcritic in harsh severity level noticing
that catch variable was used outside conditional thanks to the
Perl::Critic::Policy::RegularExpressions::ProhibitCaptureWithoutTest
policy. See "Perl Best Practices", chapter 12. Regular Expressions,
section 12.15. Captured Values:
Pattern matches that fail never assign anything to $1, $2, etc.,
nor do they leave those variables undefined. After an unsuccessful
pattern match, the numeric capture variables remain exactly as they
were before the match was attempted.
New version is in my opinion much easier to understand; previous
version worked correctly due to the fact that we returned from loop
on first found match.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Non-capturing groups are useful because they have better runtime
performance and do not copy strings to the magic global capture
variables.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In two places there was hard tab character instead of space.
Fix this.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic in 83ae209 (checkout branch: prime cache-tree fully,
2009-04-20) is bogus; checkout can switch branches with a dirty
index and in such a case the tree won't match HEAD.
Add t2014-switch to catch this breakage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When converting from other encodings (e.g. EUC-JP or UTF-8), there are
subtly different variants of ISO-2022-JP, all of which are valid. At the
end of line or when a run of string switches to 1-byte sequence, ESC ( B
can be used to switch to ASCII or ESC ( J can be used to switch to ISO
646:JP (JIS X 0201) but they essentially are the same character set and
are used interchangeably. Similarly the set ESC $ @ switches to (JIS X
0208-1978) and ESC $ B switches to (JIS X 0208-1983) are in practice used
interchangeably.
Depending on the iconv library and the locale definition on the system, a
program that converts from another encoding to ISO-2022-JP can produce
different byte sequence, and GIT_TEST_CMP (aka "diff -u") will report the
difference as a failure.
Fix this by converting the expected and the actual output to UTF-8 before
comparing when the end result is ISO-2022-JP. The test vector string in
t3900/ISO-2022-JP.txt is expressed with ASCII and JIS X 0208-1983, but it
can be expressed with any other possible variant, and when converted back
to UTF-8, these variants produce identical byte sequences.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use block form of 'grep' i.e. 'grep {BLOCK} LIST' rather than
'grep(EXPR, LIST)' in filter_snapshot_fmts subroutine. This makes
code more readable, as expression is rather long, and statement above
there is 'map' with very similar expression also in the block form.
Remove unnecessary and misleading parentheses around block form 'map'
arguments in quote_command subroutine.
The inner "map" in format_snapshot_links was left alone, as it is not
clear whether adding parentheses or changing it into block form would
improve readibility and clarity of this code.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From 94638fb6edf3ea693228c680a6a30271ccd77522 Mon Sep 17 00:00:00 2001
From: Jakub Narebski <jnareb@gmail.com>
Date: Mon, 11 May 2009 03:25:55 +0200
Subject: [PATCH] gitweb: Localize magic variable $/
Instead of undefining and then restoring magic variable $/ (input
record separator) for 'slurp mode', localize it.
While at it, state explicitely that "local $/;" makes it undefined, by
using explicit "local $/ = undef;".
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In most cases (except insert_file() subroutine) we used old two argument
form of 'open' to open files for reading. This can cause subtle bugs when
$projectroot or $projects_list file starts with mode characters ('>', '<',
'+<', '|', etc.) or with leading whitespace; and also when $projects_list
file or $mimetypes_file or ctags files end with trailing whitespace or '|'.
Additionally it is also more clear to explicitly state that we open those
files for reading.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: Do not use bareword filehandles
The script was using bareword filehandles. This is considered a bad
practice so they have been changed to indirect filehandles.
Changes touch git_get_project_ctags and mimetype_guess_file;
while at it rename local variable from $mime to $mimetype (in
mimetype_guess_file) to better reflect its value (its contents).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to allow input lines that point at objects that we do not
have when dealing with submodule entries anyway. This adds an explicit
option to allow missing objects of other types, to be consistent with
the use of --info-only option to the update-index command and --missing-ok
option to the write-tree command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch replace the "--next-exit" option of "git bisect--helper"
with a "--next-all" option that does merge base checking using
the "check_good_are_ancestors_of_bad" function implemented in
"bisect.c" in a former patch.
The new "--next-all" option is then used in "git-bisect.sh" instead
of the "--next-exit" option, and all the shell functions in
"git-bisect.sh" that are now unused are removed.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a port of the function with the same name that is in
"git-bisect.sh". The new function is not used yet but will be in
a later patch.
We also implement an helper "check_ancestors" function that use
"start_command" and "finish_command" to launch
"git rev-list $good ^$bad".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
And all functions needed to make it work.
This is a port from the shell function with the same name
"git-bisect.sh". This function is not used yet but it will be used
later.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes sha1_array easier to use, so later patches will be simpler.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So they can be used on the good array too.
This is done by renaming many functions and some variables to
remove "skip" in the name, and by adding a
"struct sha1_array *array" argument where needed.
While at it, make the second argument to "lookup_sha1_array"
const. It becomes "const unsigned char *sha1".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch moves some function calls into "bisect_next_exit" so
that functions are nesting less.
The call to "bisect_rev_setup" is moved from "bisect_common" into
"bisect_next_exit" and the call to "read_bisect_refs" from
"bisect_rev_setup" into "bisect_next_exit".
While at it, "rev_argv" is moved into "bisect_rev_setup".
This will make it easier and cleaner to implement checking merge
bases.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because we will use other instances of this struct.
The "rev_argv_push" function is changed into 2 functions
"argv_array_push" and "argv_array_push_sha1" that take a "struct
argv_array *" as first argument. And these functions are used to
simplify "bisect_rev_setup".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will make it easier to use good revisions for checking merge
bases later.
To simplify the code, a new "sha1_array_push" function is also
introduced.
And while at it we move the earlier part of the code to fill the
argv that is passed to "setup_revisions", so that all this code is
now completely after "read_bisect_refs".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch is a minor clean up right now, but the new function
will evolve and be used more later.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch creates a "struct sha1_array" to store skipped revisions,
so that the same struct can be reused in a later patch for good
revisions.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far mktree (which has always been a quick hack) had no test.
At least give it a bit of test coverage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is perfectly normal if a tree entry points at a missing commit as long
as the mode of the entry says it is a submodule.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main() function used to do the whole thing; this moves the handling of
a single input line to a separate function to make it easier to read.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Such format relationships are very useful things to remember for
script writers.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Delayed negation in a statement is harder to spot and keep in mind.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "sq" function was the only place using Perl in "git-bisect.sh",
this removes the Perl dependency in this script.
While at it, we also remove the sed instruction in the Makefile that
substituted @@PERL@@ with the Perl path in shell scripts, as this is
not needed anymore. (It is now only needed in "git-instaweb.sh" but
this command is dealt with separately in the Makefile.)
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because it was used only by "git bisect--helper --next-vars" but
the "--next-vars" option has been removed.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The goal of this patch is to port more shell code from the "bisect_next"
function in "git-bisect.sh" to C code in "builtin-bisect--helper.c".
So we port the code that interprets the bisection result and stops or
continues (by checking out the next revision) the bisection process.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the code, and while at it we create the
"print_commit_list" function that will be reused later.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you are trying to come up with the final result (i.e. depth=0), you
want to record how the conflict arose by registering the state of the
common ancestor, your branch and the other branch in the index, hence you
want to do update_stages().
When you are merging with positive depth, that is because of a criss-cross
merge situation. In such a case, you would need to record the tentative
result, with conflict markers and all, as if the merge went cleanly, even
if there are conflicts, in order to write it out as a tree object later to
be used as a common ancestor tree.
update_file() calls update_file_flags() with update_cache=1 to signal that
the result needs to be written to the index at stage #0 (i.e. merged), and
the code should not clobber the index further by calling update_stages().
The codepath to deal with rename/delete conflict in a recursive merge
however left the index unmerged.
Signed-off-by: Dave Olszewski <cxreg@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes git checkout know to use the threaded index preloading if it
is enabled in the config file. You need to have
[core]
preloadindex = true
in your config file to see it, and for that feature to make sense your
filesystem needs to be able to do concurrent 'lstat()' lookups, but when
that is the case (especially NFS over a high-latency network), this can
be a noticeable performance win.
But with a low-latency network and at least older Linux NFS clients, this
will clearly potentially cause a lot of lock contention. It may still
speed up the uncached case, but the threading and locking overhead will
result in the cached case likely slowing down.
That was almost certainly fixed by Linux commit fc0f684c2 ("NFS: Remove
BKL from NFS lookup code"), but that one got merged into 2.6.27-rc1, so
older kernel versions than 2.6.27 will not scale very well.
But regardless, it's the right thing to do. If your filesystem doesn't
scale, don't enable index preloading.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we ask get_stat_data() to get the mode and size of an index entry,
we can avoid the lstat() call if we have marked the index entry as being
uptodate due to earlier lstat() calls.
This avoids a lot of unnecessary lstat() calls in eg 'git checkout',
where the last phase shows the differences to the working tree
(requiring a diff), but earlier phases have already verified the index.
On the kernel repo (with a fast machine and everything cached), this
changes timings of a nul 'git checkout' from
- Before (best of ten):
0.14user 0.05system 0:00.19elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+13237minor)pagefaults 0swaps
- After
0.11user 0.03system 0:00.15elapsed 98%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+13235minor)pagefaults 0swaps
so it can obviously be noticeable, although equally obviously it's not a
show-stopper on this particular machine. The difference is likely larger
on slower machines, or with operating systems that don't do as good a job
of name caching.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation: cloning to empty directory is allowed
Clarify kind of conflict in merge-one-file helper
git config: clarify --add and --get-color
archive-tar.c: squelch a type mismatch warning
This adds --reference option to git submodule add and
git submodule update commands, which is passed to git clone.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We try to warn the user if one of their pathspecs caused no
matches, as it may have been a typo. However, we disable the
warning if the pathspec points to an existing file, since
that means it is not a typo but simply an empty directory.
Unfortunately, the file_exists() test was broken for one
special case: the pathspec of the project root is just "".
This patch detects this special case and acts as if the file
exists (which it must, since it is the project root).
The user-visible effect is that this:
$ mkdir repo && cd repo && git init && git add .
used to complain like:
fatal: pathspec '' did not match any files
but now is a silent no-op.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far we only set it to absolute paths in some cases which lead
to problems like wc_chdir not working.
Signed-off-by: Frank Lichtenheld <flichtenheld@astaro.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise git will use the current directory as work tree which will
lead to unexpected results if we operate in sub directory of the
work tree.
Signed-off-by: Frank Lichtenheld <flichtenheld@astaro.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ecmerge documentation mentions the following form:
ecmerge --mode=diff2 $1 $2
Since git-difftool is about diffing, we should use that instead
of --mode=merge2. Likewise, this drops the $MERGED argument to
emerge, as discussed on the git list ($gmane/117930).
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let a command-line --keep-subject (-k) override a config-specified
format.numbered (--numbered (-n)), rather than provoking the
"-n and -k are mutually exclusive" failure.
* t4021-format-patch-numbered.sh: Test for the above
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The alias argv comes from the split_cmdline function, which
splits the config text for the alias into an array of
strings. It returns the number of elements in the array, but
does not actually put a NULL at the end of the array.
Later, the trace function tries to print this argv and
assumes that it has the trailing NULL.
The split_cmdline function is probably at fault, since argv
lists almost always end with a NULL signal. This patch adds
one, in addition to the returned count; this doesn't hurt
the other callers at all, since they were presumably using
the count already (and will never look at the NULL).
While we're there and using ALLOC_GROW, let's clean up the
other manual grow.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is asking for trouble since '\' is a directory separator in
Windows and thus may produce unpredictable results.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use of function prototypes is considered bad practice in Perl. The
ones used here didn't accomplish anything anyhow, so they've been
removed.
>From perlsub(1):
[...] the intent of this feature [prototypes] is primarily to let
you define subroutines that work like built-in functions [...]
you can generate new syntax with it [...]
We don't want to have subroutines behaving exactly like built-in
functions, we don't want to define new syntax / syntactic sugar, so
prototypes in gitweb are not needed... and they can have unintended
consequences.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cloning into an existing empty directory is now allowed:
commit 55892d2398
("Allow cloning to an existing empty directory")
Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because no special rule for this existed it was allowed by default
Signed-off-by: Heiko Voigt <heiko.voigt@mahr.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert git-grep to parseopt.
The bitfields in struct grep_opt are converted to full ints,
increasing its size. This shouldn't be a problem as there is only a
single instance in memory.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the only global variable in builtin-grep.c, builtin_grep, by a
local one and a function parameter with reversed meaning.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for options that don't start with a dash. Initially, they
don't accept arguments and can only be short options, i.e. consist of a
single character.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a way to recognize numerical options. The number is passed to
a callback function as a string.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Thu, May 07, 2009 at 09:44:17PM +0200, René Scharfe wrote:
Subject: [PATCH] ls-files: make --no-empty-directory properly negatable
This option was specified to parseopt as an OPT_BIT; however, we
actually want to _set_ the bit on --no-empty-directory. Thus the
existing implementation used --no-empty-directory, and required
--no-no-empty-directory to negate it.
Now that OPT_NEGBIT exists, we can properly support it as
--empty-directory and --no-empty-directory (but of course
still defaulting to showing empty directories).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add OPTION_NEGBIT and OPT_NEGBIT, mirroring OPTION_BIT and OPT_BIT.
OPT_NEGBIT can be used together with OPT_BIT to define two options
that cancel each other out.
Note: this patch removes the reminder from the test script because
it adds a test for --no-or4 and there already was one for --or4.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not as verbose as the recursive merge driver, but better still.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some systems, giving a value of type time_t to printf "%lo" that
expects an unsigned long would give a type mismatch warning.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX only requires sed to work on text files and MERGE_RR is not a text
file. Some versions of sed complain that this file is not newline
terminated, and exit non-zero. Use perl instead which does not have a
problem with it.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two lines appear to be unnecessary. They set variables which are not
used afterwards. The primary motivation to remove them is that the sed
invocation exits non-zero for seds which require newline termination of
input files.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of sed exit non-zero if the file they are supplied is not
newline terminated. Solaris's /usr/xpg4/bin/sed is one such sed. So
rework this test to avoid doing so.
This affects tests t8001-annotate.sh and t8002-blame.sh.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of sed exit non-zero if the file they are supplied is not
newline terminated. Solaris's /usr/xpg4/bin/sed is one such sed. In
this case the sed invocation can be avoided entirely since the resulting
file is equivalent to a previously created file. So, just copy that file
into place instead.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not all versions of grep understand backslashed extended regular
expressions. Possibly only gnu grep does.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fredrik Skolmli and Thomas Rast noticed that it was left unstated that
"git clean" ran from a subdirectory will not affect anything outside it,
with or without path limiters.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
improve error message in config.c
t4018-diff-funcname: add cpp xfuncname pattern to syntax test
Work around BSD whose typeof(tv.tv_sec) != time_t
git-am.txt: reword extra headers in message body
git-am.txt: Use date or value instead of time or timestamp
git-am.txt: add an 'a', say what 'it' is, simplify a sentence
dir.c: Fix two minor grammatical errors in comments
git-svn: fix a sloppy Getopt::Long usage
According to POSIX, tv_sec is supposed to be a time_t, but OpenBSD
(and FreeBSD, too) defines it to be a long, which triggers a type
mismatch when a pointer to it is given to localtime_r().
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's nice to know that 'it' is git-am or the subject line. Whitespace
implies characters so just remove characters.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add completion for --confirm, --suppress-cc, and --smtp-encryption
command line arguments. Add completion for aliasfiletype and confirm
configuration variables.
Since --smtp-ssl is deprecated, replace it with --smtp-encryption and
the two options ssl and tls.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Getopt-Long v2.38 is much stricter about sloppy getopt usage. The
trailing pipe causes git-svn testcases to fail for all of the --stdin
argument calls.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-read-tree-multi:
checkout branch: prime cache-tree fully
read-tree -m A B: prime cache-tree from the switched-to tree
Move prime_cache_tree() to cache-tree.c
read-tree A B: do not corrupt cache-tree
* mk/maint-apply-swap:
tests: make test-apply-criss-cross-rename more robust
builtin-apply: keep information about files to be deleted
tests: test applying criss-cross rename patch
* jc/maint-1.6.0-keep-pack:
pack-objects: don't loosen objects available in alternate or kept packs
t7700: demonstrate repack flaw which may loosen objects unnecessarily
Remove --kept-pack-only option and associated infrastructure
pack-objects: only repack or loosen objects residing in "local" packs
git-repack.sh: don't use --kept-pack-only option to pack-objects
t7700-repack: add two new tests demonstrating repacking flaws
is_kept_pack(): final clean-up
Simplify is_kept_pack()
Consolidate ignore_packed logic more
has_sha1_kept_pack(): take "struct rev_info"
has_sha1_pack(): refactor "pretend these packs do not exist" interface
git-repack: resist stray environment variable
* bs/maint-1.6.0-tree-walk-prefix:
match_tree_entry(): a pathspec only matches at directory boundaries
tree_entry_interesting: a pathspec only matches at directory boundary
If the local receiving repository has disabled the use of delta base
offset, for example to retain compatibility with older versions of
Git that predate OFS_DELTA, we shouldn't ask for ofs-delta support
when we obtain a pack from the remote server.
[ issue noticed by Shawn Pearce ]
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://repo.or.cz/git-gui:
git-gui: Fixes for Mac OS X TkAqua
git-gui: Update Russian translation
git-gui: run post-checkout hook after clone
git-gui: Ensure consistent usage of mergetool.keepBackup
git-gui: fix use of undeclared variable diff_empty_count
git-gui (Win): make starting via "Git GUI Here" on .git/ possible
git-gui (Win): make "Explore Working Copy" more robust
git-gui: run post-checkout hook on checkout
git-gui: When calling post-commit hook wrong variable was cleared.
git-gui: use `git --html-path` to get the location of installed HTML docs
git-gui: fix deleting from the context menu with empty selection
git-gui: minor spelling fix and string factorisation.
git-gui: various French translation fixes
git-gui: Fix merge conflict display error when filename contains spaces
git-gui: don't hide the Browse button when resizing the repo chooser
Append ampersand to "Target" of lnk files created by do_cygwin_shortcut
git-gui: Support more git version notations.
git-gui: Avoid an infinite rescan loop in handle_empty_diff.
git-gui: Fix post-commit status with subject in non-locale encoding
The fetching of OFS_DELTA objects has been negotiated between both peers
since git version 1.4.4. However, this was missing from the push side
where every OFS_DELTA objects were always converted to REF_DELTA objects
causing an increase in transferred data.
To fix this, both the client and the server processes have to be
modified: the former to invoke pack-objects with --delta-base-offset
when the server provides the ofs-delta capability, and the later to send
that capability when OFS_DELTA objects are allowed as already indicated
by the repack.usedeltabaseoffset config variable which is TRUE by
default since git v1.6.0.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- detect more Tk.framework variants
- fix apple menu setup, use native preferences menu item
- don't set menu font
Signed-off-by: Daniel A. Steffen <das@users.sourceforge.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Add Russian translation
gitk: Fix compare-commits function when we have local changes
gitk: Avoid crash if closed while reading references
gitk: Handle external diff tool with spaces in the path
gitk: Remember and restore the window state with the geometry
gitk: Map KP_Divide to focus the search box
gitk: Mark some more strings for translation
gitk: Mark forgotten string for translation
gitk: Make .gitk a hidden file under windows
gitk: Add a command to compare two strings of commits
gitk: Add a way to mark a commit, plus a "find descendant" command
gitk: Fixes for Mac OS X TkAqua
gitk: Provide a 32x32 window icon based on the git logo
gitk: Provide a window icon if possible
gitk: Handle blobs containing a DOS end-of-file marker
Thanks go to Dmitry Potapov for proofreading and suggested translation
of the word 'merge'.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Not as verbose as the recursive merge driver, but better still.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps to notice when something's going wrong, especially on
systems which lock open files.
I used the following criteria when selecting the code for replacement:
- it was already printing a warning for the unlink failures
- it is in a function which already printing something or is
called from such a function
- it is in a static function, returning void and the function is only
called from a builtin main function (cmd_)
- it is in a function which handles emergency exit (signal handlers)
- it is in a function which is obvously cleaning up the lockfiles
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This seem to be a very common pattern in the current code.
The function prints a generic removal failure message, the file name
which failed and readable errno presentation. The function preserves
errno and always returns the value unlink(2) returned, but prints
no message for ENOENT, as it was the most often filtered out in the
code calling unlink. Besides, removing a file is anyway the purpose of
calling unlink.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On OS X (and maybe other unices), getaddrinfo(3) returns NULL
in the ai_canonname field if it's called with an IP address for
the hostname. We'll now use the IP address for the hostname if
ai_canonname was NULL, this also matches the behaviour on Linux.
steps to reproduce:
$ git daemon --export-all
$ git clone git://127.0.0.1/frotz
=> git daemon's fork (silently) segfaults.
Remove the pointless loop while at it. There is only one iteration
because of the break; on the last line and there are no continues.
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We cannot represent the 3-way conflicted state in the work tree
for these entries, but it is normal not to have commit objects
for them in our repository. Just update the index and the life
will be good.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's throw an error on this specific case. If the user specifies the
config file, he must know what he is doing.
Teemu Likonen pointed this out.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Unreliable hardlinks" is a misleading description for what is happening.
So rename it to something less misleading.
Suggested by Linus Torvalds.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The combine diff logic knew only about blobs (and their checked-out form
in the work tree, either regular files or symlinks), and barfed when fed
submodules. This "externalizes" gitlinks in the same way as the normal
patch generation codepath does (i.e. "Subproject commit Xxx\n") to fix the
issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also, the previous translations of the words 'tag' and 'merge' were
changed. Added translation of the 'Tool' submenu.
Thanks go to Alexander Gavrilov and Dmitry Potapov for proofreading
and suggestions.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
For all uses of $(ASCIIDOC) in Documentation/Makefile, supply the same
options via $(ASCIIDOC_EXTRA).
Signed-off-by: Eric Blake <ebb9@byu.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On platforms with $X, make removes any leftover scripts 'a' from
earlier builds if a new binary 'a.exe' is now built. However, on
cygwin 1.7.0, 'git' and 'git.exe' now consistently name the same file.
Test for file equality before attempting a remove, in order to avoid
nuking just-built binaries.
This repeats commit 0d768f7 for the installation destdir.
Signed-off-by: Eric Blake <ebb9@byu.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
grep: fix segfault when "git grep '('" is given
Documentation: fix a grammatical error in api-builtin.txt
builtin-merge: fix a typo in an error message
* maint-1.6.1:
grep: fix segfault when "git grep '('" is given
Documentation: fix a grammatical error in api-builtin.txt
builtin-merge: fix a typo in an error message
* maint-1.6.0:
grep: fix segfault when "git grep '('" is given
Documentation: fix a grammatical error in api-builtin.txt
builtin-merge: fix a typo in an error message
The SubmittingPatches file was trimmed down from a somewhat
overwhelming set of requirements from the Linux Kernel equivalent;
however perhaps a little of it can be returned without making the
text too long.
Signed-off-by: Sam Vilain <sam@vilain.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user has defined NO_PERL, we want to skip building
gitweb entirely. However, the conditional to add
gitweb/gitweb.cgi to OTHER_PROGRAMS was evaluated before we
actually parsed the user's config.mak. This meant that "make
NO_PERL=NoThanks" worked fine, but putting "NO_PERL=NoThanks"
into your config.mak broke the build (it wanted gitweb.cgi
to satisfy "all", but the rule to build it was conditionally
ignored, so it complained).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Trying to be lazy and comparing files with fake-editor.sh to avoid
having to provide another example text does not work well: the blob
name changes when SHELL_PATH changes, and so does the 'index' line
in the diff.
Therefore provide a second example text.
Noticed by Mike Ralphson.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test might happen to be the last one in the script, but other people
later may want to add more tests after your test is done.
Do not surprise them by going in a subdirectory to run a part of your test
and never coming out of it. This fixes a162e78 in that respect.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A progress indicator is used to count through the 256 object fan-out
directories while unused object files are removed. (However, it becomes
visible only if this process takes long enough.)
Previously, display_progress() was only called if object files were
actually removed. But if directories towards the end (fd/, fe/, ff/) did
not exist, this could leave a strange line
Removing duplicate objects: 99% (255/256), done.
in the terminal instead of the expected "100% (256/256)".
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While I did a
make -j64 test > ~/t.out
to check my previous patch (in case some test actually tested 'trustctime'
or something), I noticed this one. Somebody has speeling trouble:
t4202-log.sh: line 345: test_expect_sucess: command not found
Fixed thus.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diffstat used the color.diff.plain slot (context text) for coloring
filenames and the whole summary line. This didn't look nice and the
affected text isn't patch context at all.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that accessing NTFS partitions with ufsd (at least on my EeePC)
has an unnerving bug: if you link() a file and unlink() it right away,
the target of the link() will have the correct size, but consist of NULs.
It seems as if the calls are simply not serialized correctly, as single-stepping
through the function move_temp_to_file() works flawlessly.
As ufsd is "Commertial software" (sic!), I cannot fix it, and have to work
around it in Git.
At the same time, it seems that this fixes msysGit issues 222 and 229 to
assume that Windows cannot handle link() && unlink().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
inet_ntop is not protocol independent.
getnameinfo(3) is part of POSIX and is available when getaddrinfo(3) is.
This code is only compiled when NO_IPV6 isn't defined.
The old method was buggy anyway, not every ipv6 address was converted
properly because the buffer (addr) was too small.
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing text is a little bit awkward. This rewrites the description
section to be more readable and friendly.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were a few minor grammatical errors that made this paragraph hard
to read. This patch fixes the errors in a very minimal manner.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the recent rework of the object listing mechanism of
pack-objects/rev-list, git-repack now properly packs objects from alternate
repositories even when the local repository contains packs.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--no-thread' option is a Getopt::Long boolean option. The '--no-'
prefix (as in --no-thread) for boolean options is not supported in
Getopt::Long version 2.32 which was released with Perl 5.8.0. This version
only supports '--no' as in '--nothread'. More recent versions of
Getopt::Long, such as version 2.34, support either prefix. So use the older
form in the tests.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Often the throughput output is requested when the data read so far is
one smaller than multiple of 1024; because 1023/1024 is ~0.999, it often
shows up as 0.99 because the code currently truncates.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This implements completion of --color and --no-color for "git
show-branch" and color.showbranch for "git config".
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Difftool is written in perl, so we don't build it if NO_PERL
is set.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the config file contains a section like this:
[remote]
default = foo
(it should be '[remotes]') then commands like
git status
git checkout
git branch -v
fail even though they are not obviously related to remotes. (These
commands write "ahead, behind" information and, therefore, access the
per-remote information).
Unknown configuration keys should be ignored, not trigger errors.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If for some reason the config file contains a key without a subkey like
[man]
foo = bar
then even a plain
git help
produces an error message. With this patch such an entry is ignored.
Additionally, the warning about unknown sub-keys is removed. It could
become annoying if new sub-keys are introduced in the future, and then
the configuration is read by an old version of git that does not know
about it.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git submodule update --rebase' rebases your local branch on top of what
would have been checked out to a detached HEAD otherwise.
In some cases, detaching the HEAD when updating a submodule complicates
the workflow to commit to this submodule (checkout master, rebase, then
commit). For submodules that require frequent updates but infrequent
(if any) commits, a rebase can be executed directly by the git-submodule
command, ensuring that the submodules stay on their respective branches.
git-config key: submodule.$name.rebase (bool)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The install target still descends into perl subdirectory when NO_PERL is
requested. Fix this.
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By renaming 'information' to 'configuration' we capture more clearly
what a configuration file holds.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify --no-binary description using some words from the original
commit 37c22a4b (add --no-binary, 2008-05-9). Cleanup --suffix
description. Add --thread style option to synopsis and reorganize it a
bit. Clarify renaming patches example and the configuration paragraph.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a missing quote and properly escape the ' character so docs don't
look odd. Add 'the' to make some sentences more gramatically correct.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even when a sentence is started with 'shallow' or 'deep' use the
lowercase version to maintain consistency.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A minor fix to place the terminal input on a new line if test-genrandom
is run with no arguments.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-read-tree-multi:
checkout branch: prime cache-tree fully
read-tree -m A B: prime cache-tree from the switched-to tree
Move prime_cache_tree() to cache-tree.c
read-tree A B: do not corrupt cache-tree
elm stores a text file version of the aliases that is
<alias> = <comment> = <email address>
This adds the parsing of this file to git-send-email
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A minor fix that eliminates usage of "2>/dev/null" when --quiet or
-q has already been implemented.
Signed-off-by: Dan Loewenherz <daniel.loewenherz@yale.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few more fixes on top of the automatic spell checker generated ones.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way the sentence is currently written, there needs to be an "its",
but this leads to: "however the remote wildcard may be anywhere as long
as it's its own" which is awkward to read.
Instead, this patch fixes he grammar in a simpler way.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this fix, the output looks like:
"Keep in mind that the (asterisk) wildcard of the local ref (right of
the :) *must be the ..." -- with half the sentence spuriously bold.
This fixes the problem by simply escaping asciidoc syntax as suggested
by Jeff King <peff@peff.net>.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In ActivetState Perl, exec does not wait for the started program. This
breaks difftool tests and may cause unexpected behaviour: git difftool
has returned, but the rest of code (diff and possibly the interactive
program are still running in the background.
Acked-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it possible to color the status character ('*' '!' '+' '-') of each
commit corresponding to the branch it's in. This makes it easier to
follow a particular branch, especially if there are larger gaps in the
output.
Add the config option color.showbranch and the command line options
--color and --no-color to control the colored output.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use horizontal lines instead of long diagonal lines during the
collapsing state of graph rendering. For example what used to be:
| | | | |
| | | |/
| | |/|
| |/| |
|/| | |
| | | |
is now
| | | | |
| |_|_|/
|/| | |
| | | |
This results in more compact and legible graphs.
Signed-off-by: Allan Caffee <allan.caffee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An off by one error was causing octopus merges with 3 parents to not be
rendered correctly. This regression was introduced by 427fc5.
Signed-off-by: Allan Caffee <allan.caffee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An extra space is being inserted between the "commit" column and all of
the successive edges. Remove this space. This regression was
introduced by 427fc5b.
Signed-off-by: Allan Caffee <allan.caffee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend this test to cover the rendering of graphs with octopus merges
and pre_commit lines.
Signed-off-by: Allan Caffee <allan.caffee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, test_create_repo() expects that templates can be found below
`pwd`/.. This assumption fails when tests are run against a git
installed somewhere else or test_create_repo() is called from
subdirectiories (several tests do this).
Therefore, use $TEST_DIRECTORY as introduced in 2d84e9fb and expect
templates to be present in $TEST_DIRECTORY/.. which should be the root
dir of the git checkout.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a bug in the compare-commits function added in commit
010509f2 ("gitk: Add a command to compare two strings of commits")
where gitk would show an error dialog if the comparison of commits
got to a fake commit (one showing local changes). It extends
getpatchid to handle these fake commits by using [diffcmd] to get
the git diff command variant to use, and also handles the situation
where an error occurs.
Now that we can have the fake commit IDs showing up, which are
00..00 and 00..01, the short ID is ambiguous. To make sure the links
point to the right commit, this adds a new [appendshortlink] procedure
which takes the full link destination, and uses that rather than
appendwithlinks.
Signed-off-by: Paul Mackerras <paulus@samba.org>
* mk/maint-apply-swap:
tests: make test-apply-criss-cross-rename more robust
builtin-apply: keep information about files to be deleted
tests: test applying criss-cross rename patch
Conflicts:
t/t4130-apply-criss-cross-rename.sh
When pulling from a remote, the full URL including username
is by default added to the commit message. Since it adds
very little value but could be used by malicious people to
glean valid usernames (with matching hostnames), we're far
better off just stripping the username before storing the
remote URL locally.
Note that this patch has no lasting visible effect when
"git pull" does not create a merge commit. It simply
alters what gets written to .git/FETCH_HEAD, which is used
by "git merge" to automagically create its messages.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
color.grep and color.grep.* is the official and documented way to
highlight grep matches. Comparable options like diff.color.* and
status.color.* exist for backward compatibility reasons only and are not
documented any more.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 55f0566 (get_local_heads(): do not return random pointer if
there is no head, 2009-04-17) fixed a segfault for git push, this
patch adds a test-case to avoid future regressions.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I realized that this test does check if git-apply succeeds, but doesn't
tell if it applies patches correctly. So I added test_cmp to check it.
I also added a test which checks swapping three files.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Example correct diff generated by `diff -M -B' might look like this:
diff --git a/file1 b/file2
similarity index 100%
rename from file1
rename to file2
diff --git a/file2 b/file1
similarity index 100%
rename from file2
rename to file1
Information about removing `file2' comes after information about creation
of new `file2' (renamed from `file1'). Existing implementation isn't able to
apply such patch, because it has to know in advance which files will be
removed.
This patch populates fn_table with information about removal of files
before calling check_patch() for each patch to be applied.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e4c72923 (write_entry(): use fstat() instead of lstat() when file
is open, 2009-02-09) introduced an optimization of write_entry().
Unfortunately, we cannot take advantage of this optimization on Windows
because there is no guarantee that the time stamps are updated before the
file is closed:
"The only guarantee about a file timestamp is that the file time is
correctly reflected when the handle that makes the change is closed."
(http://msdn.microsoft.com/en-us/library/ms724290(VS.85).aspx)
The failure of this optimization on Windows can be observed most easily by
running a 'git checkout' that has to update several large files. In this
case, 'git checkout' will report modified files, but infact only the
timestamps were incorrectly recorded in the index, as can be verified by a
subsequent 'git diff', which shows no change.
Dmitry Potapov reports the same fix needs on Cygwin; this commit contains
his updates for that.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When switching to another branch, the earlier code relied on incremental
invalidation of cache-tree entries to degrade it. While it is not wrong
per-se, we know that the resulting index must fully match the branch we
are switching to unless the -m (merge) option is used.
We should simply fully re-prime the cache-tree using the new tree object
in such a case. And for safety, invalidate the cache-tree as a whole in
other cases.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When switching to a new branch with "read-tree -m A B", the resulting
index must match tree B and we can prime the cache tree with it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit aab3b9a (read-tree A B C: do not create a bogus index
and do not segfault, 2009-03-12) resurrected the support for an obscure
(but useful) feature to read and overlay more than one tree into the index
without the -m (merge) option. But the fix was not enough.
Exercising this feature exposes a longstanding bug in the code that primes
the cache-tree in the index from the tree that was read. The intention
was that when we know that the index must exactly match the tree we just
read, we prime the entire cache-tree with it.
However, the logic to detect that case incorrectly triggered if you read
two trees without -m. This resulted in a corrupted cache-tree, and
write-tree would have produced an incorrect tree object out of such an
index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have replaced rename() with a version that can rename a file to a
destination that already exists. Nevertheless, many users, the author
included, observe failures in the code that are not reproducible.
The theory is that the failures are due to some other process that happens
to have opened the destination file briefly at the wrong moment. (And there
is no way on Windows to delete or replace a file that is currently open.)
The most likely candidate for such a process is a virus scanner. The
failure is more often observed while there is heavy git activity (for
example while the test suite is running or during a rebase operation).
We work around the failure by retrying the rename operation if it failed
due to ERROR_ACCESS_DENIED. The retries are delayed a bit: The first only
by giving up the time slice, the next after the minimal scheduling
granularity, and if more retries are needed, then we wait some non-trivial
amount of time with exponential back-off.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the detection of the requested snapshot format, which failed for
PATH_INFO URLs since the references to the hashes which describe the
supported snapshot formats weren't dereferenced appropriately.
Signed-off-by: Holger Weiß <holger@zedat.fu-berlin.de>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit cbd3a01 added a new "q" subcommand to the "git add -p"
command loop, but forgot to add it to the prompt.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ef/maint-fast-export:
builtin-fast-export.c: handle nested tags
builtin-fast-export.c: fix crash on tagged trees
builtin-fast-export.c: turn error into warning
test-suite: adding a test for fast-export with tag variants
* mm/maint-add-p-quit:
Update git-add.txt according to the new possibilities of 'git add -p'.
add-interactive: refactor mode hunk handling
git add -p: new "quit" command at the prompt.
The text is merely cut-and-pasted from git-add--interactive.perl. The
cut-and-paste also fixes a typo.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original implementation considered the mode separately
from the rest of the hunks, asking about it outside the main
hunk-selection loop. This patch instead places a mode change
as the first hunk in the loop. This has two advantages:
1. less duplicated code (since we use the main selection
loop). This also cleans up an inconsistency, which is
that the main selection loop separates options with a
comma, whereas the mode prompt used slashes.
2. users can now skip the mode change and come back to it,
search for it (via "/mode"), etc, as they can with other
hunks.
To facilitate this, each hunk is now marked with a "type".
Mode hunks are not considered for splitting (which would
make no sense, and also confuses the split_hunk function),
nor are they editable. In theory, one could edit the mode
lines and change to a new mode. In practice, there are only
two modes that git cares about (0644 and 0755), so either
you want to move from one to the other or not (and you can
do that by staging or not staging).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's already 'd' to stop staging hunks in a file, but no explicit
command to stop the interactive staging (for the current files and the
remaining ones). Of course you can do 'd' and then ^C, but it would be
more intuitive to allow 'quit' action.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of doing the (potentially very expensive) "in_merge_base()"
check for each commit that might be pruned if it is unreachable, do a
preparatory reachability graph of the commit space, so that the common
case of being reachable can be tested directly.
[ Cleaned up a bit and tweaked to actually work. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This clarifies the pruning rules for unreachable commits by having a
separate helpder function for the unreachability decision.
It's preparation for actual bigger changes to come to speed up the
decision when the reachability calculations become a bottleneck.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When tags that points to tags are passed to fast-export, an error is given,
saying "Tag [TAGNAME] points nowhere?". This fix calls parse_object() on the
object before referencing it's tag, to ensure the tag-info is fully initialized.
In addition, it inserts a comment to point out where nested tags are handled.
This is consistent with the comment for signed tags.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a tag object points to a tree (or another unhandled type), the commit-
pointer is left uninitialized and later dereferenced. This patch adds a
default case to the switch that issues a warning and skips the object.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import doesn't have a syntax to support tree-objects (and some other
object-types), so fast-export shouldn't handle them. However, aborting the
operation is a bit drastic. This patch turns the error into a warning instead.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ash (used as /bin/sh on many distros) has a shell expansion bug
for the form ${var:+word word}. The result is a single argument
"word word". Work around by using ${var:+word} ${var:+word} or
equivalent.
Signed-off-by: Ben Jackson <ben@ben.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/pack-object-memuse:
show_object(): push path_name() call further down
process_{tree,blob}: show objects without buffering
Conflicts:
builtin-pack-objects.c
builtin-rev-list.c
list-objects.c
list-objects.h
upload-pack.c
* nd/archive-attribute:
archive test: attributes
archive: do not read .gitattributes in working directory
unpack-trees: do not muck with attributes when we are not checking out
attr: add GIT_ATTR_INDEX "direction"
archive tests: do not use .gitattributes in working directory
* maint:
Describe fixes since 1.6.2.3
doc/git-daemon: add missing arguments to max-connections option
doc/git-daemon: add missing arguments to options
init: Do not segfault on big GIT_TEMPLATE_DIR environment variable
imap-send: use correct configuration variable in documentation
* bs/maint-1.6.0-tree-walk-prefix:
match_tree_entry(): a pathspec only matches at directory boundaries
tree_entry_interesting: a pathspec only matches at directory boundary
* cb/maint-merge-recursive-submodule-fix:
simplify output of conflicting merge
update cache for conflicting submodule entries
add tests for merging with submodules
This documentation update is needed to reflect the recent changes where
"core.sharedRepository = 0mode" was changed to set, not loosen, the
repository permissions.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/cobdoc:
docs/checkout: clarify what "non-branch" means
doc/checkout: split checkout and branch creation in synopsis
doc/checkout: refer to git-branch(1) as appropriate
doc: refer to tracking configuration as "upstream"
doc: clarify --no-track option
* mm/add-p-quit:
Update git-add.txt according to the new possibilities of 'git add -p'.
add-interactive: refactor mode hunk handling
git add -p: new "quit" command at the prompt.
* da/difftool:
mergetool--lib: simplify API usage by removing more global variables
Fix misspelled mergetool.keepBackup
difftool/mergetool: refactor commands to use git-mergetool--lib
mergetool: use $( ... ) instead of `backticks`
bash completion: add git-difftool
difftool: add support for a difftool.prompt config variable
difftool: add various git-difftool tests
difftool: move 'git-difftool' out of contrib
difftool/mergetool: add diffuse as merge and diff tool
difftool: add a -y shortcut for --no-prompt
difftool: use perl built-ins when testing for msys
difftool: remove the backup file feature
difftool: remove merge options for opendiff, tkdiff, kdiff3 and xxdiff
git-mergetool: add new merge tool TortoiseMerge
git-mergetool/difftool: make (g)vimdiff workable under Windows
doc/merge-config: list ecmerge as a built-in merge tool
The gitattributes documentation has a section on the "diff"
attribute, with subsections for each of the things you might
want to configure in your diff config section (external
diff, hunk headers, etc). The first such subsection
specifically notes that the definition of the diff driver
should go into $GIT_DIR/config, but subsequent sections do
not.
This location is implied if you are reading the
documentation sequentially, but it is not uncommon for a new
user to jump to (or be referred to) a specific section. For
a new user who does not know git well enough to recognize
the config syntax, it is not clear that those directives
don't also go into the gitattributes file.
This patch just mentions the config file in each subsection,
similar to the way it is mentioned in the first.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since git doesn't provide a receive.denyBranchCreation or similar, here is
an example of how to be sure users cannot create branches remotely by
pushing a new reference.
This setup has been proven useful to prevent creation of spurious branches
because of users having their remote.origin.push set to HEAD, when they
use `git push` while being on a local topic branch of theirs instead of
the proper one.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test script for all archive attributes and their handling in
normal and bare repositories. export-ignore and export-subst are
tested, as well as the effect of the option --worktree-attributes.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old behaviour still remains with --worktree-attributes, and it is
always on for the legacy "git tar-tree".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This instructs attr mechanism, not to look into working .gitattributes
at all. Needed by tools that does not handle working directory, such
as "git archive".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are interested in using archive mostly from a bare repository, so it
should not add .gitattributes to the work tree.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When interpreting a config value, the config parser reads in 1+ space
character(s) and puts -one- space character in the buffer as soon as
the first non-space character is encountered (if not inside quotes).
Unfortunately the buffer size check lacks the extra space character
which gets inserted at the next non-space character, resulting in
a crash with a specially crafted config entry.
The unit test now uses Java to compile a platform independent
.NET framework to output the test string in C# :o)
Read: Thanks to Johannes Sixt for the correct printf call
which replaces the perl invocation.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new shorten_unambiguous_ref() for simplifying the output of
upstream branch names. This affects status and checkout.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
it's silly to do this:
mkdir foo && cd foo && git init && git push somewhere.git
but segfault should not happen even in that case.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As recorded in msysGit issue 125, if the user closes gitk while it
reports itself as still reading references then Tk will crash in the
geometry management code. This has been fixed for Tk 8.5.7 and above.
This patch avoids the problem by flushing outstanding geometry events
before calling the readrefs procedure.
See also http://code.google.com/p/msysgit/issues/detail?id=125
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This fixes the launching of external diff to handle a diff tool
that has spaces in the path. This ensures a correctly formed
tcl list is passed to the open command with a single pipe character
prefixing the list (as per the tcl manual page for open).
The specific fault observed was that selecting WinMerge as the diff
tool from the default installed location in Program Files failed to
be launched from the context menu.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This records the window state in ~/.gitk. On startup, if the gitk
window was previously maximized (zoomed), then we restore that state.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Commit 97bed034 changed the behavior of the '/' key on the keyboard,
but the '/' on the keypad was left unused. They now both do the same
thing.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The text is merely cut-and-pasted from git-add--interactive.perl. The
cut-and-paste also fixes a typo.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original implementation considered the mode separately
from the rest of the hunks, asking about it outside the main
hunk-selection loop. This patch instead places a mode change
as the first hunk in the loop. This has two advantages:
1. less duplicated code (since we use the main selection
loop). This also cleans up an inconsistency, which is
that the main selection loop separates options with a
comma, whereas the mode prompt used slashes.
2. users can now skip the mode change and come back to it,
search for it (via "/mode"), etc, as they can with other
hunks.
To facilitate this, each hunk is now marked with a "type".
Mode hunks are not considered for splitting (which would
make no sense, and also confuses the split_hunk function),
nor are they editable. In theory, one could edit the mode
lines and change to a new mode. In practice, there are only
two modes that git cares about (0644 and 0755), so either
you want to move from one to the other or not (and you can
do that by staging or not staging).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's already 'd' to stop staging hunks in a file, but no explicit
command to stop the interactive staging (for the current files and the
remaining ones). Of course you can do 'd' and then ^C, but it would be
more intuitive to allow 'quit' action.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Example correct diff generated by `diff -M -B' might look like this:
diff --git a/file1 b/file2
similarity index 100%
rename from file1
rename to file2
diff --git a/file2 b/file1
similarity index 100%
rename from file2
rename to file1
Information about removing `file2' comes after information about creation
of new `file2' (renamed from `file1'). Existing implementation isn't able to
apply such patch, because it has to know in advance which files will be
removed.
This patch populates fn_table with information about removal of files
before calling check_patch() for each patch to be applied.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not only was it a repeat, but it also had no effect.
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If someone responded with a negative (n|no) to the confirmation,
then the Message-ID of the discarded email is no longer used
in the References: header of subsequent emails.
Consequently, send_message() now returns 1 if the message was
sent and 0 otherwise.
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should make things a little more robust in terms of user input;
before, even the program got it wrong by outputting a line with only
"GIT:", which was left in place as a header, because there would be
no following space character.
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace description of sendemail.multiedit in --annotate docs
with a reference to the CONFIGURATION section.
Add such a reference to the --compose documentation.
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modified the graph drawing logic to colorize edges based on parent-child
relationships similiarly to gitk.
Signed-off-by: Allan Caffee <allan.caffee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This applies the shorten_unambiguous_ref function to the object name.
Default mode is controlled by core.warnAmbiguousRefs. Else it is given as
optional argument to --abbrev-ref={strict|loose}.
This should be faster than 'git for-each-ref --format="%(refname:short)" <ref>'
for single refs.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
core.warnAmbiguousRefs is used to select strict mode for the
abbreviation for the ":short" format specifier of "refname" and "upstream".
In strict mode, the abbreviated ref will never trigger the
'warn_ambiguous_refs' warning. I.e. for these refs:
refs/heads/xyzzy
refs/tags/xyzzy
the abbreviated forms are:
heads/xyzzy
tags/xyzzy
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the strict mode of abbreviation to shorten_unambiguous_ref(), i.e. the
resulting ref won't trigger the ambiguous ref warning.
All users of shorten_unambiguous_ref() still use the loose mode.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the code we literally stick "refs/heads/" on the front
and see if it resolves, so that is probably the best
explanation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These can really be thought of as two different modes, since
the "<branch>" parameter is treated differently in the two
(in one it is the branch to be checked out, but in the other
it is really a start-point for branch creation).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of description for the branch creation options is
simply cut and paste from git-branch. There are two reasons
to fix this:
1. It can grow stale with respect to what's in "git
branch" (which it is now is).
2. It is not just an implementation detail, but rather the
desired mental model for the command that we are using
"git branch" here. Being explicit about that can help
the user understand what is going on.
It also makes sense to strip the branch creation options
from the synopsis, as they are making it a long,
hard-to-read line. They are still easily discovered by
reading the options list, and --track is explicitly
referenced when branch creation is described.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The term "tracking" often creates confusion between remote
tracking branches and local branches which track a remote
branch. The term "upstream" captures more clearly the idea
of "branch A is based on branch B in some way", so it makes
sense to mention it.
At the same time, upstream branches are used for more
than just git-pull these days; let's mention that here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not really about ignoring the config option; it is
about turning off tracking, _even if_ the config option is
set.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People sometimes wonder why they cannot apply a patch that only
creates new files to an unborn branch.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, pushing the "path_name()" call _into_ the show() function
would seem to allow
- more clarity into who "owns" the name (ie now when we free the name in
the show_object callback, it's because we generated it ourselves by
calling path_name())
- not calling path_name() at all, either because we don't care about the
name in the first place, or because we are actually happy walking the
linked list of "struct name_path *" and the last component.
Now, I didn't do that latter optimization, because it would require some
more coding, but especially looking at "builtin-pack-objects.c", we really
don't even want the whole pathname, we really would be better off with the
list of path components.
Why? We use that name for two things:
- add_preferred_base_object(), which actually _wants_ to traverse the
path, and now does it by looking for '/' characters!
- for 'name_hash()', which only cares about the last 16 characters of a
name, so again, generating the full name seems to be just unnecessary
work.
Anyway, so I didn't look any closer at those things, but it did convince
me that the "show_object()" calling convention was crazy, and we're
actually better off doing _less_ in list-objects.c, and giving people
access to the internal data structures so that they can decide whether
they want to generate a path-name or not.
This patch does that, and then for people who did use the name (even if
they might do something more clever in the future), it just does the
straightforward "name = path_name(path, component); .. free(name);" thing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Here's a less trivial thing, and slightly more dubious one.
I was looking at that "struct object_array objects", and wondering why we
do that. I have honestly totally forgotten. Why not just call the "show()"
function as we encounter the objects? Rather than add the objects to the
object_array, and then at the very end going through the array and doing a
'show' on all, just do things more incrementally.
Now, there are possible downsides to this:
- the "buffer using object_array" _can_ in theory result in at least
better I-cache usage (two tight loops rather than one more spread out
one). I don't think this is a real issue, but in theory..
- this _does_ change the order of the objects printed. Instead of doing a
"process_tree(revs, commit->tree, &objects, NULL, "");" in the loop
over the commits (which puts all the root trees _first_ in the object
list, this patch just adds them to the list of pending objects, and
then we'll traverse them in that order (and thus show each root tree
object together with the objects we discover under it)
I _think_ the new ordering actually makes more sense, but the object
ordering is actually a subtle thing when it comes to packing
efficiency, so any change in order is going to have implications for
packing. Good or bad, I dunno.
- There may be some reason why we did it that odd way with the object
array, that I have simply forgotten.
Anyway, now that we don't buffer up the objects before showing them
that may actually result in lower memory usage during that whole
traverse_commit_list() phase.
This is seriously not very deeply tested. It makes sense to me, it seems
to pass all the tests, it looks ok, but...
Does anybody remember why we did that "object_array" thing? It used to be
an "object_list" a long long time ago, but got changed into the array due
to better memory usage patterns (those linked lists of obejcts are
horrible from a memory allocation standpoint). But I wonder why we didn't
do this back then. Maybe there's a reason for it.
Or maybe there _used_ to be a reason, and no longer is.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These links inside "stalenotes" section need to be updated on the master
branch every time a new stable or maintenance release is made.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/show-upstream:
branch: show upstream branch when double verbose
make get_short_ref a public function
for-each-ref: add "upstream" format field
for-each-ref: refactor refname handling
for-each-ref: refactor get_short_ref function
* fg/remote-prune:
add tests for remote groups
git remote update: Fallback to remote if group does not exist
remote: New function remote_is_configured()
git remote update: Report error for non-existing groups
git remote update: New option --prune
builtin-remote.c: Split out prune_remote as a separate function.
* cc/bisect-filter: (21 commits)
rev-list: add "int bisect_show_flags" in "struct rev_list_info"
rev-list: remove last static vars used in "show_commit"
list-objects: add "void *data" parameter to show functions
bisect--helper: string output variables together with "&&"
rev-list: pass "int flags" as last argument of "show_bisect_vars"
t6030: test bisecting with paths
bisect: use "bisect--helper" and remove "filter_skipped" function
bisect: implement "read_bisect_paths" to read paths in "$GIT_DIR/BISECT_NAMES"
bisect--helper: implement "git bisect--helper"
bisect: use the new generic "sha1_pos" function to lookup sha1
rev-list: call new "filter_skip" function
patch-ids: use the new generic "sha1_pos" function to lookup sha1
sha1-lookup: add new "sha1_pos" function to efficiently lookup sha1
rev-list: pass "revs" to "show_bisect_vars"
rev-list: make "show_bisect_vars" non static
rev-list: move code to show bisect vars into its own function
rev-list: move bisect related code into its own file
rev-list: make "bisect_list" variable local to "cmd_rev_list"
refs: add "for_each_ref_in" function to refactor "for_each_*_ref" functions
quote: add "sq_dequote_to_argv" to put unwrapped args in an argv array
...
* maint:
GIT 1.6.2.3
State the effect of filter-branch on graft explicitly
process_{tree,blob}: Remove useless xstrdup calls
Conflicts:
GIT-VERSION-GEN
The mergetool--lib scriplet was tricky to use because it relied upon
the existance of several global shell variables. This removes more
global variables so that things are simpler for callers.
A side effect is that some variables are recomputed each time
run_merge_tool() is called, but the overhead for recomputing
them is justified by the simpler implementation.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Wed, 8 Apr 2009, Björn Steinbrink wrote:
>
> The name of the processed object was duplicated for passing it to
> add_object(), but that already calls path_name, which allocates a new
> string anyway. So the memory allocated by the xstrdup calls just went
> nowhere, leaking memory.
Ack, ack.
There's another easy 5% or so for the built-in object walker: once we've
created the hash from the name, the name isn't interesting any more, and
so something trivial like this can help a bit.
Does it matter? Probably not on its own. But a few more memory saving
tricks and it might all make a difference.
Linus
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test was added recently (5a688fe, "core.sharedrepository = 0mode"
should set, not loosen; 2009-03-28). It checked the result of a sed
invocation for emptyness, but in some cases it forgot to print anything
at all, so that those checks would never be false.
Due to this mistake, it went unnoticed that the files in objects/info are
not necessarily 0440, but can also be 0660. Because the 0mode setting
tries to guarantee that the files are accessible only to the people they
are meant to be used by, we should only make sure that they are readable
by the user and the group when the configuration is set to 0660. It is a
separate matter from the core.shredrepository settings that w-bit from
immutable object files under objects/[0-9a-f][0-9a-f] directories should
be dropped.
COMMIT_EDITMSG is still world-readable, but it (and any transient files
that are meant for repositories with a work tree) does not matter. If you
are working on a shared machine and on a sekrit stuff, the root of the
work tree would be with mode 0700 (or 0750 to allow peeking by other
people in the group), and that would mean that .git/COMMIT_EDITMSG in such
a repository would not be readable by the strangers anyway.
Also, in the real-world use case, .git/COMMIT_EDITMSG will be given to an
arbitrary editor the user happens to use, and we have no guarantee what it
does (e.g. it may create a new file with umask and replace, it may rewrite
in place, it may leave an editor backup file but use umask to create it,
etc.), and the protection of the file lies majorly on the protection of
the root of the work tree.
This test cannot be run on Windows; it requires POSIXPERM when merged to
'master'.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With "git add -e [<files>]", Git will fire up an editor with the current
diff relative to the index (i.e. what you would get with "git diff
[<files>]").
Now you can edit the patch as much as you like, including adding/removing
lines, editing the text, whatever. Make sure, though, that the first
character of the hunk lines is still a space, a plus or a minus.
After you closed the editor, Git will adjust the line counts of the hunks
if necessary, thanks to the --recount option of apply, and commit the
patch. Except if you deleted everything, in which case nothing happens
(for obvious reasons).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ensure that the Makefile that generates and installs the Documentation is
aware of any SHELL_PATH setting. Use this value if found or the current
setting for SHELL if not. This is an accommodation for systems where sh
is not POSIX enough.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I told people on the kernel mailing list to please use "-M" when sending
me rename patches, so that I can see what they do while reading email
rather than having to apply the patch and then look at the end result.
I also told them that if they want to make it the default, they can just
add
[diff]
renames
to their ~/.gitconfig file. And while I was thinking about that, I wanted
to also check whether you can then mark individual projects to _not_ have
that default in the per-repository .git/config file.
And you can't. Currently you cannot have a global "enable renames by
default" and then a local ".. but not for _this_ project". Why? Because if
somebody writes
[diff]
renames = no
we simply ignore it, rather than resetting "diff_detect_rename_default"
back to zero.
Fixed thusly.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the repo url or the user email contain XML special characters, the
remote DAV server is likely to reject the LOCK requests because the XML
is then malformed.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It has been reported time and time again in relation to msysGit that
git-svn does not work well when core.autocrlf has any value other than
'false'. So let's make it so by default.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of a small repository, pack-objects is smart enough to not
start more threads than necessary. However, the output to the user always
reports the value of the pack.threads configuration and not the real
number of threads to be used.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --ignored-paths argument is now stored as
"svn-remote.$REMOTE_NAME.ignore-paths" in the config file.
[ew: edited subject and message]
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
The --ignore-paths option to fetch is very useful for working on a subset
of a SVN repository. For proper operation, every command that causes a
fetch (explicit or implied) must include a matching --ignore-paths option.
This patch adds a persistent svn-remote.$repo_id.ignore-paths config by
promoting Fetcher::is_path_ignored to a member function and initializing
$self->{ignore_regex} in Fetcher::new. Command line --ignore-paths is
still recognized and acts in addition to the config value.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
'git svn blame' now uses the 'git cat-file --batch' command to
speed up resolving SVN revision number out of commit SHA by
removing fork+exec overhead.
[ew: enforced 80-column line wrap]
Signed-off-by: Boris Byk <boris.byk@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
In several places mergetool.keepBackup was misspelled as merge.keepBackup.
Signed-off-by: Ferry Huberts <ferry.huberts@pelagic.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows for example gitosis to allow use of 'git archive --remote' in a
controlled environment.
Signed-off-by: Erik Broes <erikbroes@ripe.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Thu, 9 Apr 2009, Linus Torvalds wrote:
>
> [diff]
> renames = no
Btw, while doing this, I also though that "renames = on/off" made more
sense, but while we allow yes/no and true/false for booleans, we don't
allow on/off.
Should we? Maybe. Here's a stupid patch.
Linus
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a row context menu command to compare this commit and its
descendants with the marked commit and its descendants. The results
are shown in the bottom-left pane. Commits are compared by checking
whether their headlines are the same and their patches have the same
patch ID as generated by git patch-id.
Merges are ignored and skipped over (as long as they have one
descendant). If two commits have the same patch ID then the process
will continue and compare their descendants, as long as they both have
exactly one descendant. If either commit has 0 or 2 or more descendants,
the comparison stops there. There is currently a limit of 100
comparisons.
This can be useful for checking whether one string of commits is just
a rebased version of another string of commits. Mark the end of one
string (i.e. the oldest commit in the string) and invoke "Compare with
marked commit" on the end of the other string.
As this is implemented, the UI will be unresponsive while the results
are being generated. This should be fixed.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This tries to systematically cover existing behavior, and
also mark some expect_failure cases for desired behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/shared-literally:
t1301: loosen test for forced modes
set_shared_perm(): sometimes we know what the final mode bits should look like
move_temp_to_file(): do not forget to chmod() in "Coda hack" codepath
Move chmod(foo, 0444) into move_temp_to_file()
"core.sharedrepository = 0mode" should set, not loosen
* jc/maint-1.6.0-keep-pack:
pack-objects: don't loosen objects available in alternate or kept packs
t7700: demonstrate repack flaw which may loosen objects unnecessarily
Remove --kept-pack-only option and associated infrastructure
pack-objects: only repack or loosen objects residing in "local" packs
git-repack.sh: don't use --kept-pack-only option to pack-objects
t7700-repack: add two new tests demonstrating repacking flaws
is_kept_pack(): final clean-up
Simplify is_kept_pack()
Consolidate ignore_packed logic more
has_sha1_kept_pack(): take "struct rev_info"
has_sha1_pack(): refactor "pretend these packs do not exist" interface
git-repack: resist stray environment variable
Conflicts:
t/t7700-repack.sh
The name of the processed object was duplicated for passing it to
add_object(), but that already calls path_name, which allocates a new
string anyway. So the memory allocated by the xstrdup calls just went
nowhere, leaking memory.
This reduces the RSS usage for a "rev-list --all --objects" by about 10% on
the gentoo repo (fully packed) as well as linux-2.6.git:
gentoo:
| old | new
----------------|-------------------------------
RSS | 1537284 | 1388408
VSZ | 1816852 | 1667952
time elapsed | 1:49.62 | 1:48.99
min. page faults| 417178 | 379919
linux-2.6.git:
| old | new
----------------|-------------------------------
RSS | 324452 | 292996
VSZ | 491792 | 460376
time elapsed | 0:14.53 | 0:14.28
min. page faults| 89360 | 81613
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These scripts all test git programs that are written in
perl, and thus obviously won't work if NO_PERL is defined.
We pass NO_PERL to the scripts from the building Makefile
via the GIT-BUILD-OPTIONS file.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For systems with a missing or broken perl, it is nicer to
explicitly say "we don't want perl" because:
1. The Makefile knows not to bother with Perl-ish things
like Git.pm.
2. We can print a more user-friendly error message
than "foo is not a git command" or whatever the broken
perl might barf
3. Test scripts that require perl can mark themselves and
such and be skipped
This patch implements parts (1) and (2). The perl/
subdirectory is skipped entirely, gitweb is not built, and
any git commands which rely on perl will print a
human-readable message and exit with an error code.
This patch is based on one from Robin H. Johnson.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a context-menu command to put a mark on this commit. There
is at most one marked commit at any time, and it is indicated by a box
drawn around the headline. Once a commit is marked, two other
context-menu commands become available: one to select the marked commit,
and another to find the closest common descendant of this commit and
the marked commit.
The "find common descendant" command uses the displayed parent/child
relationships (i.e. the rewritten parent pointers produced by git log),
not the real parent/child relationships. Currently the UI will be
unresponsive while gitk is working out the nearest common descendant;
this should be improved in future.
Signed-off-by: Paul Mackerras <paulus@samba.org>
git-gui is using "git-read-tree -u" when cloning which doesn't
invoke the post-checkout hook as a plain git-clone would.
So git-gui must call the hook itself.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In several places merge.keepBackup is used i.s.o.
mergetool.keepBackup. This patch makes it all
consistent.
Signed-off-by: Ferry Huberts <ferry.huberts@pelagic.nl>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Commit 584fa9cc introduced the global variable diff_empty_count, which
is used in diff.tcl. This variable wasn't declared anywhere which
resulted in an ugly error message box instead of the intended
informative message.
Signed-off-by: Joerg Bornemann <joerg.bornemann@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Otherwise, git complains about not finding a branch to pull from in
'branch..merge', which is hardly understandable. While we're there,
reword the sentences slightly.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This consolidates the common functionality from git-mergetool and
git-difftool--helper into a single git-mergetool--lib scriptlet.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This information is easily accessible when we are
calculating the relationship. The only reason not to print
it all the time is that it consumes a fair bit of screen
space, and may not be of interest to the user.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Often we want to shorten a full ref name to something "prettier"
to show a user. For example, "refs/heads/master" is often shown
simply as "master", or "refs/remotes/origin/master" is shown as
"origin/master".
Many places in the code use a very simple formula: skip common
prefixes like refs/heads, refs/remotes, etc. This is codified in
the prettify_ref function.
for-each-ref has a more correct (but more expensive) approach:
consider the ref lookup rules, and try shortening as much as
possible while remaining unambiguous.
This patch makes the latter strategy globally available as
shorten_unambiguous_ref.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic for determining the upstream ref of a branch is
somewhat complex to perform in a shell script. This patch
provides a plumbing mechanism for scripts to access the C
logic used internally by git-status, git-branch, etc.
For example:
$ git for-each-ref \
--format='%(refname:short) %(upstream:short)' \
refs/heads/
master origin/master
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code handles some special magic like *-deref and the
:short formatting specifier. The next patch will add another
field which outputs a ref and wants to use the same code.
This patch splits the "which ref are we outputting" from the
actual formatting. There should be no behavioral change.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Change double quotes to single quotes in message
Documentation: clarify .gitattributes search
git-checkout.txt: clarify that <branch> applies when no path is given.
git-checkout.txt: fix incorrect statement about HEAD and index
Conflicts:
Documentation/git-checkout.txt
* maint-1.6.1:
Documentation: clarify .gitattributes search
git-checkout.txt: clarify that <branch> applies when no path is given.
git-checkout.txt: fix incorrect statement about HEAD and index
Most of the time when we give branch name in the message, we quote it
inside a pair of single-quotes. git-checkout uses double-quotes; this
patch corrects the inconsistency.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.0:
Documentation: clarify .gitattributes search
git-checkout.txt: clarify that <branch> applies when no path is given.
git-checkout.txt: fix incorrect statement about HEAD and index
* bs/maint-1.6.0-tree-walk-prefix:
match_tree_entry(): a pathspec only matches at directory boundaries
tree_entry_interesting: a pathspec only matches at directory boundary
* cb/maint-merge-recursive-submodule-fix:
simplify output of conflicting merge
update cache for conflicting submodule entries
add tests for merging with submodules
This makes mergetool consistent with Documentation/CodingGuidelines.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds completion for difftool's --tool flag.
The known diff tool names were also consolidated into
a single variable.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
difftool now supports difftool.prompt so that users do not have to
pass --no-prompt or hit enter each time a diff tool is launched.
The --prompt flag overrides the configuration variable.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7800-difftool.sh tests the various command-line flags,
git-config variables, and environment settings supported by
git-difftool.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This prepares 'git-difftool' and its documentation for
mainstream use.
'git-difftool-helper' became 'git-difftool--helper'
since users should not use it directly.
'git-difftool' was added to the list of commands as
an ancillaryinterrogator.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is another consistency cleanup to make git-difftool's options
match git-mergetool.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I don't even know what $COMSPEC means so let's be safe and use the
same perly $^O test add--interactive uses. While we're at it, make
git-difftool match the prevalent git-perl style.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most users find the backup file feature annoying and there's no
need for it since diff is supposed to be a read-only operation.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We shouldn't try to merge files when using difftool, so remove
any merge-specific options.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
TortoiseMerge comes with TortoiseSVN or TortoiseGit for Windows. It can
only be used as a merge tool with an existing base file. It cannot be
used without a base nor as a diff tool.
The documentation only mentions the slash '/' as command line option
prefix, which refused to work, but the parser also accepts the dash '-'
See http://code.google.com/p/msysgit/issues/detail?id=226
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Under Windows vimdiff and gvimdiff are not available as symbolic links,
but as batch files vimdiff.bat and gvimdiff.bat. These files weren't
found by 'type vimdiff' which led to the following error:
The merge tool vimdiff is not available as 'vimdiff'
Even if they were found, it wouldn't work to invoke these batch files
from git-mergetool.
To solve this, use vim and gvim (vim.exe and gvim.exe) and pass the -d
command line switch over to them.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a cleanup patch to make it easier to use the
"show_bisect_vars" function and take advantage of the rev_list_info
struct.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch removes the last static variables that were used in
the "show_commit" function.
To do that, we create a new "rev_list_info" struct that we will pass
in the "void *data" argument to "show_commit".
This means that we have to change the first argument to
"show_bisect_vars" too.
While at it, we also remove a "struct commit_list *list" variable
in "cmd_rev_list" that is not really needed.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The goal of this patch is to get rid of the "static struct rev_info
revs" static variable in "builtin-rev-list.c".
To do that, we need to pass the revs to the "show_commit" function
in "builtin-rev-list.c" and this in turn means that the
"traverse_commit_list" function in "list-objects.c" must be passed
functions pointers to functions with 2 parameters instead of one.
So we have to change all the callers and all the functions passed
to "traverse_commit_list".
Anyway this makes the code more clean and more generic, so it
should be a good thing in the long run.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other pages use --option=<argument>, not --option='argument', do the
same here.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function took a "refinfo" object which is unnecessarily
restrictive; it only ever looked at the refname field. This
patch refactors it to take just the ref name as a string.
While we're touching the relevant lines, let's give it
consistent memory semantics. Previously, some code paths
would return an allocated string and some would return the
original string; now it will always return a malloc'd
string.
This doesn't actually fix a bug or a leak, because
for-each-ref doesn't clean up its memory, but it makes the
function a lot less surprising for reuse (which will
happen in a later patch).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the term "toplevel of the work tree" in gitattributes.txt and
gitignore.txt to define the limits of the search for those files.
Signed-off-by: Jason Merrill <jason@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, the sentence "Defaults to HEAD." can be mis-read to mean
that "git checkout -- hello.c" checks-out from HEAD.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command "git checkout" checks out from the index by default, not
HEAD (the introducing comment were correct, but the detailled
explanation added below were not).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, git remote update <remote> would fail unless there was
a remote group configured with the same name as the remote.
git remote update will now fall back to using the remote if no matching
group can be found.
This enables "git remote update -p <remote>..." to fetch and prune one
or more remotes, for example.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, there was no easy way to check for the existence of a
configured remote. remote_get for example would always create the remote
"on demand".
This new function returns 1 if the remote is configured, 0 otherwise.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previosly, git remote update <non-existing-group> would just silently fail
and do nothing. Now it will report an error saying that the group does
not exist.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/name-branch:
Don't permit ref/branch names to end with ".lock"
check_ref_format(): tighten refname rules
strbuf_check_branch_ref(): a helper to check a refname for a branch
Fix branch -m @{-1} newname
check-ref-format --branch: give Porcelain a way to grok branch shorthand
strbuf_branchname(): a wrapper for branch name shorthands
Rename interpret/substitute nth_last_branch functions
Conflicts:
Documentation/git-check-ref-format.txt
* jc/shared-literally:
t1301: loosen test for forced modes
set_shared_perm(): sometimes we know what the final mode bits should look like
move_temp_to_file(): do not forget to chmod() in "Coda hack" codepath
Move chmod(foo, 0444) into move_temp_to_file()
"core.sharedrepository = 0mode" should set, not loosen
* sb/format-patch-patchname:
format_sanitized_subject: Don't trim past initial length of strbuf
log-tree: fix patch filename computation in "git format-patch"
format-patch: --numbered-files and --stdout aren't mutually exclusive
format-patch: --attach/inline uses filename instead of SHA1
format-patch: move get_patch_filename() into log-tree
format-patch: pass a commit to reopen_stdout()
format-patch: construct patch filename in one function
pretty.c: add %f format specifier to format_commit_message()
A handful of random personal preference:
- Force sans-serif for the text.
- Quote code sample literal inside a single-quote pair.
- Show emphasis in blue-green italics.
- Do not use itarlics for term definition, but show them in navy.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you regularly create patches which require a Signed-off: line you may
want to make it your default to add that line. It also helps you not to forget
to add the -s/--signoff switch.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This works around git-gui's error message
Cannot use funny .git directory: .
when started from the .git/ directory, which is useful in repositories
without any directories for the right click.
Now git-gui can be started via Windows Explorer shell extension (Git GUI
Here) from the .git/ directory.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Starting the Explorer from the git-gui menu "Explore Working Copy"
didn't work, when git-gui was started via Windows Explorer shell
extension (Git GUI Here) from a directory within the project.
The Explorer raised an error message like this:
Path "C:/somedir/worktree" is not available or not a directory
It worked when started from the project directory itself, because then
the path argument for the Explorer was just '.' (current directory)
without any problematic forward slashes.
To make it work, convert the path given as argument to explorer.exe to
its native format with backslashes.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui is using "git-read-tree -u" for checkout which doesn't
invoke the post-checkout hook as a plain git-checkout would.
So git-gui must call the hook itself.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Before calling the post-commit hook, the variable "pc_err" is cleared
while later only "pch_error" is used. "pch_error$cmt_id" only appeared in
"upvar"-Statements (which were changed to "global") and was removed.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Previously a hardcoded path $GIT_EXEC_PATH/../Documentation/ was used to
search for the documentation, when the user has asked for it via menu
"Help -> Online Documentation".
This didn't work for the default directory structure.
To find the path reliably, use the new git command line option, which
returns the correct path.
If the output of `git --html-path` is empty because git is not found or
the option is not yet supported in the installed git, the documentation
from kernel.org is launched. There is no additional guessing of the
right location of the installed docs.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This adds --committer-date-is-author-date, --ignore-date, and --no-utf8
options. The --binary option is removed, as it was made a no-op by
cb3a160. The option list is also sorted alphabetically.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the --prune (or -p) option, git remote update will also prune
all the remotes that it fetches. Previously, you had to do a manual
git remote prune <remote> for each of the remotes you wanted to
prune, and this could be tedious with many remotes.
A single command will now update a set of remotes, and remove all
stale branches: git remote update -p [group]
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prune_remote will be used in update(), so this function was split
out to avoid code duplication.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing:
eval "git bisect--helper --next-vars" | {
while read line
do
echo "$line &&"
done
echo ':'
}
the result code comes from the last "echo ':'", not from running
"git bisect--helper --next-vars".
This patch gets rid of the need to string together the line from
the output of "git bisect--helper" with "&&" in the calling script
by making "git bisect--helper --next-vars" return output variables
already in that format.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of "int show_all, int show_tried" we now only pass "int flags",
because we will add one more flag in a later patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds some tests to check that "git bisect" works fine when
passing paths to "git bisect start" to reduce the number of
bisection steps.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new "git bisect--helper" builtin. It should be faster and
safer instead of the old "filter_skipped" shell function. And it
is a first step to move more shell code to C.
As the output is a little bit different we have to change the code
that interpret the results. But these changes improve code clarity.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed because "git bisect--helper" must read bisect paths
in "$GIT_DIR/BISECT_NAMES", so that a bisection can be performed only
on commits that touches paths in this file.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch implements a new "git bisect--helper" builtin plumbing
command that will be used to migrate "git-bisect.sh" to C.
We start by implementing only the "--next-vars" option that will
read bisect refs from "refs/bisect/", and then compute the next
bisect step, and output shell variables ready to be eval'ed by
the shell.
At this step, "git bisect--helper" ignores the paths that may
have been put in "$GIT_DIR/BISECT_NAMES". This will be fixed in a
later patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
instead of the specific one that was simpler but less efficient.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch implements a new "filter_skip" function in C in
"bisect.c" that will later replace the existing implementation in
shell in "git-bisect.sh".
An array is used to store the skipped commits. But the array is
not yet fed anything.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Actually, you have to set the -b option after the add command.
Signed-off-by: Julien Danjou <julien@danjou.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously we ignored the result of calling add_interactive,
which meant that if an error occurred we simply committed
whatever happened to be in the index.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the code without changing the semantics and removes
the unhelpful "needs $sha1" part of the conflicting submodule message.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When merging merge bases during a recursive merge we do not want to
leave any unmerged entries. Otherwise we cannot create a temporary
tree for the recursive merge to work with.
We failed to do so in case of a submodule conflict between merge
bases, causing a NULL pointer dereference in the next step of the
recursive merge.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In "git-bisect.sh" the "git checkout" command is only used to
change the current branch, but it is used like this:
git checkout "$branch"
which will output the following misleading error message when
it fails:
error: pathspec 'foo' did not match any file(s) known to git.
This patch change the way we use "git checkout" like this:
git checkout "$branch" --
so that we will get the following error message:
fatal: invalid reference: foo
which is better.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used in GUIs to open installed HTML documentation in the
browser.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/sha1-bsearch: (95 commits)
patch-ids: use the new generic "sha1_pos" function to lookup sha1
sha1-lookup: add new "sha1_pos" function to efficiently lookup sha1
Update draft release notes to 1.6.3
GIT 1.6.2.2
send-email: ensure quoted addresses are rfc2047 encoded
send-email: correct two tests which were going interactive
Documentation: git-svn: fix trunk/fetch svn-remote key typo
Mailmap: Allow empty email addresses to be mapped
Cleanup warning about known issues in cvsimport documentation
Documentation: Remove an odd "instead"
send-email: ask_default should apply to all emails, not just the first
send-email: don't attempt to prompt if tty is closed
fix portability problem with IS_RUN_COMMAND_ERR
Documentation: use "spurious .sp" XSLT if DOCBOOK_SUPPRESS_SP is set
mailmap: resurrect lower-casing of email addresses
builtin-clone.c: no need to strdup for setenv
builtin-clone.c: make junk_pid static
git-svn: add a double quiet option to hide git commits
Update draft release notes to 1.6.2.2
Documentation: push.default applies to all remotes
...
instead of the specific one from which the new one has been copied.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function has been copied from the "patch_pos" function in
"patch-ids.c" but an additional parameter has been added.
The new parameter is a function pointer, that is used to access the
sha1 of an element in the table.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 6e18251 (send-email: refactor and ensure prompting doesn't loop
forever) introduced an ask function, which unfortunately had a nasty
bug. This caused it not to accept anything but the default reply to the
"Who should the emails appear to be from?" prompt, and nothing but
ctrl-d to the "Who should the emails be sent to?" and "Message-ID to be
used as In-Reply-To for the first email?" prompts.
This commit corrects the issues and adds a test to confirm the fix.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While 'git checkout <submodule>' should not update the submodule's
working directory, it should update the index. This is in line with
how submodules are handled in the rest of Git.
While at it, test 'git reset [<commit>] <submodule>', too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using multi-pass authentication methods, the curl library may
need to rewind the read buffers (depending on how much already has
been fed to the server) used for providing data to HTTP PUT, POST or
PROPFIND, and in order to allow the library to do so, we need to tell
it how by providing either an ioctl callback or a seek callback.
This patch adds an ioctl callback, which should be usable on older
curl versions (since 7.12.3) than the seek callback (introduced in
curl 7.18.0).
Some HTTP servers (such as Apache) give an 401 error reply immediately
after receiving the headers (so no data has been read from the read
buffers, and thus no rewinding is needed), but other servers (such
as Lighttpd) only replies after the whole request has been sent and
all data has been read from the read buffers, making rewinding necessary.
Signed-off-by: Martin Storsjo <martin@martin.st>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dm/maint-docco:
Documentation: Remove spurious uses of "you" in git-bisect.txt.
Documentation: minor grammatical fix in git-check-ref-format.txt
Documentation: minor grammatical fixes in git-check-attr.txt
Documentation: minor grammatical fixes in git-cat-file.txt
Documentation: minor grammatical fixes and rewording in git-bundle.txt
Documentation: remove some uses of the passive voice in git-bisect.txt
Documentation: reword example text in git-bisect.txt.
Documentation: reworded the "Description" section of git-bisect.txt.
Documentation: minor grammatical fixes in git-branch.txt.
Documentation: minor grammatical fixes in git-blame.txt.
Documentation: reword the "Description" section of git-bisect.txt.
Documentation: minor grammatical fixes in git-archive.txt.
sanitize_address assumes that quoted addresses (e.g., "first last"
<first.last@example.com) do not need rfc2047 encoding, but this is
not always the case.
For example, various places in send-email extract addresses using
parse_address_line. parse_address_line returns the addresses already
quoted (e.g., "first last" <first.last@example.com), but not rfc2047
encoded.
This patch makes sanitize_address stricter about what needs rfc2047
encoding and adds a test demonstrating where I noticed the problem.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c18f75a (send-email: add tests for refactored prompting, 2009-03-28)
added two tests which went interactive under the dash shell.
This patch corrects the issue, reported by Björn Steinbrink.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ef/fast-export:
builtin-fast-export.c: handle nested tags
builtin-fast-export.c: fix crash on tagged trees
builtin-fast-export.c: turn error into warning
test-suite: adding a test for fast-export with tag variants
* cj/doc-format:
Documentation: use "spurious .sp" XSLT if DOCBOOK_SUPPRESS_SP is set
Documentation: option to render literal text as bold for manpages
Documentation: asciidoc.conf: fix verse block with block titles
Documentation: asciidoc.conf: always use <literallayout> for [blocktext]
Documentation: move "spurious .sp" code into manpage-base.xsl
Documentation: move quieting params into manpage-base.xsl
Documentation: rename docbook-xsl-172 attribute to git-asciidoc-no-roff
Documentation: use parametrized manpage-base.xsl with manpage-{1.72,normal}.xsl
Documentation: move callouts.xsl to manpage-{base,normal}.xsl
Documentation/Makefile: break up texi pipeline
Documentation/Makefile: make most operations "quiet"
* jc/maint-1.6.0-keep-pack:
pack-objects: don't loosen objects available in alternate or kept packs
t7700: demonstrate repack flaw which may loosen objects unnecessarily
Remove --kept-pack-only option and associated infrastructure
pack-objects: only repack or loosen objects residing in "local" packs
git-repack.sh: don't use --kept-pack-only option to pack-objects
t7700-repack: add two new tests demonstrating repacking flaws
Conflicts:
t/t7700-repack.sh
Fix the git-svn documentation svn-remote example section talking about
tags and branches by using the proper key "fetch" instead of "trunk".
Using "trunk" actually might be nice, but it doesn't currently work.
The fetch line for the trunk was also reordered to be at the top of the
list, since most people think about the trunk/tags/branches trio in that
logical order.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the code did a simple prefix match, which means that a path in
a directory "frotz/" would have matched with pathspec "f".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the code did a simple prefix match, which means that a
path in a directory "frotz/" would have matched with pathspec "f".
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While it makes no sense to map some email address to an empty one, doing
things the other way around can be useful. For example when using
filter-branch with an env-filter that employs a mailmap to fix up an
import that created such broken commits with empty email addresses.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes sure that local branches, when followed using --track, behave
the same as remote ones (e.g. differences being reported by git status
and git checkout). This fixes 1 known failure.
The fix is done within branch_get(): The first natural candidate,
namely remote_find_tracking(), does not have all the necessary info
because in general there is no remote struct for '.', and we don't want
one because it would show up in other places as well.
branch_get(), on the other hand, has access to merge_names[] (in
addition to merge[]) and therefore can set up the followed branch
easily.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of doing the (potentially very expensive) "in_merge_base()"
check for each commit that might be pruned if it is unreachable, do a
preparatory reachability graph of the commit space, so that the common
case of being reachable can be tested directly.
[ Cleaned up a bit and tweaked to actually work. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This clarifies the pruning rules for unreachable commits by having a
separate helpder function for the unreachability decision.
It's preparation for actual bigger changes to come to speed up the
decision when the reachability calculations become a bottleneck.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 6e18251 made the "Send this email?" prompt assume yes if confirm
= "inform" when it was unable to get a valid response. However, the
"yes" assumption only worked correctly for the first email. This commit
fixes the issue and confirms the fix by modifying the existing test for
the prompt to send multiple emails.
Reported by Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Attempting to prompt when the tty is closed (typically when running from
cron) is pointless and emits a warning. This patch causes ask() to
return early, squelching the warning.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the aspects of the test checked explicitly for the
g+s bit to be set on created directories. However, this is
only the means to an end (the "end" being having the correct
group set). And in fact, on systems where
DIR_HAS_BSD_GROUP_SEMANTICS is set, we do not even need to
use this "means" at all, causing the test to fail.
This patch removes that part of the test. In an ideal world
it would be replaced by a test to check that the group was
properly assigned, but that is difficult to automate because
it requires the user running the test suite be a member of
multiple groups.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some old versions of gcc don't seem to like us negating an
enum constant. Let's work around it by negating the other
half of the comparison instead.
Reported by Pierre Poissinger on gcc 2.9.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the subject line is '...' the strbuf will be accessed before the
first dot is added; potentially changing the strbuf passed into the
function or accessing sb->buf[-1] if it was originally empty.
Reported-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this change, the "spurious .sp" suppression XSLT code is
disabled by default. It can be enabled by defining
DOCBOOK_SUPPRESS_SP.
The "spurious .sp" XSLT fragment was used to work around a bug
first released in docbook-xsl 1.69.1. Modern versions of
docbook-xsl are negatively affected by the code (some empty lines
are omitted from manpage output; see
<http://article.gmane.org/gmane.comp.version-control.git/115302>).
The key revisions in the docbook SVN repo seem to be 5144 (before
docbook-xsl 1.69.1) and 6359 (before docbook-xsl 1.71.1).
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0925ce4(Add map_user() and clear_mailmap() to mailmap) broke the
lower-casing of email addresses. This mostly did not matter if your
.mailmap has only lower-case email addresses; However, we did not
require .mailmap to contain lowercase-only email addresses.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People may expect/prefer -q to still show git commits,
so this change allows a second -q to hide them.
Signed-off-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Acked-by: Eric Wong <normalperson@yhbt.net>
* maint:
Update draft release notes to 1.6.2.2
Fix bash completion in path with spaces
bash completion: only show 'log --merge' if merging
git-tag(1): add hint about commit messages
Documentation: update graph api example.
* maint-1.6.1:
Fix bash completion in path with spaces
bash completion: only show 'log --merge' if merging
git-tag(1): add hint about commit messages
Documentation: update graph api example.
Conflicts:
contrib/completion/git-completion.bash
* maint-1.6.0:
Fix bash completion in path with spaces
bash completion: only show 'log --merge' if merging
git-tag(1): add hint about commit messages
Documentation: update graph api example.
push.default is not only for the current remote but setting the default
behaviour for all remotes.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for branch.*.merge is very dense, so add a simple
explanation on top of it.
And branch.*.remote also affects 'git push'.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gitk completion only shows --merge if MERGE_HEAD is present.
Do it the same way for git-log completion.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a tag is not annotated, git tag displays the commit message
instead. Add this hint to the manpage to unhide this secret.
Signed-off-by: Nico Schottelius <nico@ikn.schottelius.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of commit 03300c0 the graph API uses '*' for all nodes including merges.
This updates the example in the documentation to match.
Signed-off-by: Allan Caffee <allan.caffee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An "Application Error" was raised when trying to delete text from the
commit message field when no text was selected.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
and declare it in "bisect.h" as we will use this function later.
While at it, rename its last argument "show_all" instead of
"bisect_find_all".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a straightforward clean up to make "cmd_rev_list" function
smaller.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch creates new "bisect.c" and "bisect.h" files and move
bisect related code into these files.
While at it, we also remove some include directives that are not
needed any more from the beginning of "builtin-rev-list.c".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "bisect_list" variable was static for no reason as it is only used
in the "cmd_rev_list" function.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "for_each_{tag,branch,remote,replace,}_ref" functions are
redefined in terms of "for_each_ref_in" so that we can lose the
hardcoded length of prefix strings from the code.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
This new function unwraps the space separated shell quoted elements in
its first argument and places them in the argv array passed as its second
argument.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sq_dequote() function does not allow parsing a string with more than
one single-quoted parameter easily; use its code to implement a new API
sq_dequote_step() to allow the caller iterate through such a string to
parse them one-by-one. The original sq_dequote() becomes a thin wrapper
around it.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several places in send-email prompt for input, and will do so forever
when the input is EOF. This is poor behavior when send-email is run
unattended (say from cron).
This patch refactors the prompting to an ask() function which takes a
prompt, an optional default, and an optional regex to validate the
input. The function returns on EOF, or if a default is provided and the
user simply types return, or if the input passes the validating regex
(which accepts all input by default). The ask() function gives up after
10 tries in case of invalid input.
There are four callers of the function:
1) "Who should the emails appear to be from?" which provides a default
sender. Previously the user would have to type ctrl-d to accept the
default. Now the user can just hit return, or type ctrl-d.
2) "Who should the emails be sent to?". Previously this prompt passed a
second argument ("") to $term->readline() which was ignored. I believe
the intent was to allow the user to just hit return. Now the user
can do so, or type ctrl-d.
3) "Message-ID to be used as In-Reply-To for the first email?".
Previously this prompt passed a second argument (effectively undef) to
$term->readline() which was ignored. I believe the intent was the same
as for (2), to allow the user to just hit return. Now the user can do
so, or type ctrl-d.
4) "Send this email?". Previously this prompt would loop forever until
it got a valid reply. Now it stops prompting on EOF or a valid reply. In
the case where confirm = "inform", it now defaults to "y" on EOF or the
user hitting return, otherwise an invalid reply causes send-email to
terminate.
A followup patch adds tests for the new functionality.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To find the blob object name given a tree and pathname, we were
incorrectly calling "git ls-tree" with a "--" argument followed
by the pathname of the file we wanted to get.
git ls-tree <TREE> -- --dashed/path/name.c
Unlike many command-line interfaces, the "--" alone does not
symbolize the end of non-option arguments on the command-line.
ls-tree interprets the "--" as a prefix to match against, thus
the entire contents of the --dashed/* hierarchy would be
returned because the "--" matches "--dashed" and every path
under it.
Thanks to Anton Gyllenberg for pointing me toward the
Twisted repository as a real-world example of this case.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Embarrassingly, the common prefix calculation did not work properly, due
to a mistake in the assignment: instead of assigning the dirname of the
current file name, the dirname of the current common prefix needs to
be assigned to common prefix, when the current prefix does not match the
current file name.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When tags that points to tags are passed to fast-export, an error is given,
saying "Tag [TAGNAME] points nowhere?". This fix calls parse_object() on the
object before referencing it's tag, to ensure the tag-info is fully initialized.
In addition, it inserts a comment to point out where nested tags are handled.
This is consistent with the comment for signed tags.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a tag object points to a tree (or another unhandled type), the commit-
pointer is left uninitialized and later dereferenced. This patch adds a
default case to the switch that issues a warning and skips the object.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import doesn't have a syntax to support tree-objects (and some other
object-types), so fast-export shouldn't handle them. However, aborting the
operation is a bit drastic. This patch turns the error into a warning instead.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ideally only errors should be output in this mode so fetch
can be run from cron and normally produce no output. Without
this change it would output a single line on each git commit,
e.g.
r1909 = 32ef87860662526d4a62f903949ed21e0341079e (u2_10_12_branch)
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Acked-by: Eric Wong <normalperson@yhbt.net>
To find the blob object name given a tree and pathname, we were
incorrectly calling "git ls-tree" with a "--" argument followed
by the pathname of the file we wanted to get.
git ls-tree <TREE> -- --dashed/path/name.c
Unlike many command-line interfaces, the "--" alone does not
symbolize the end of non-option arguments on the command-line.
ls-tree interprets the "--" as a prefix to match against, thus
the entire contents of the --dashed/* hierarchy would be
returned because the "--" matches "--dashed" and every path
under it.
Thanks to Anton Gyllenberg for pointing me toward the
Twisted repository as a real-world example of this case.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
adjust_shared_perm() first obtains the mode bits from lstat(2), expecting
to find what the result of applying user's umask is, and then tweaks it
as necessary. When the file to be adjusted is created with mkstemp(3),
however, the mode thusly obtained does not have anything to do with user's
umask, and we would need to start from 0444 in such a case and there is no
point running lstat(2) for such a path.
This introduces a new API set_shared_perm() to bypass the lstat(2) and
instead force setting the mode bits to the desired value directly.
adjust_shared_perm() becomes a thin wrapper to the function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now move_temp_to_file() is responsible for doing everything that is
necessary to turn a tempfile in $GIT_DIR into its final form, it must make
sure "Coda hack" codepath correctly makes the file read-only.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bring documentation in test-lib and clean target
in Makefile in-line with abc5d372.
Signed-off-by: Emil Sit <sit@emilsit.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
format-patch supports the format.headers configuration for adding
arbitrary email headers to the patches it outputs. This patch adds
support for an --add-header argument which makes the same feature
available from the command line. This is useful when the content of
custom email headers must change from branch to branch.
This patch has been sponsored by Grant Street Group
Signed-off-by: Michael Hendricks <michael@ndrix.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing out a loose object or a pack (index), move_temp_to_file() is
called to finalize the resulting file. These files (loose files and packs)
should all have permission mode 0444 (modulo adjust_shared_perm()).
Therefore, instead of doing chmod(foo, 0444) explicitly from each callsite
(or even forgetting to chmod() at all), do the chmod() call from within
move_temp_to_file().
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the behaviour of octal notation to how it is defined in the
documentation, while keeping the traditional "loosen only" semantics
intact for "group" and "everybody".
Three main points of this patch are:
- For an explicit octal notation, the internal shared_repository variable
is set to a negative value, so that we can tell "group" (which is to
"OR" in 0660) and 0660 (which is to "SET" to 0660);
- git-init did not set shared_repository variable early enough to affect
the initial creation of many files, notably copied templates and the
configuration. We set it very early when a command-line option
specifies a custom value.
- Many codepaths create files inside $GIT_DIR by various ways that all
involve mkstemp(), and then call move_temp_to_file() to rename it to
its final destination. We can add adjust_shared_perm() call here; for
the traditional "loosen-only", this would be a no-op for many codepaths
because the mode is already loose enough, but with the new behaviour it
makes a difference.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using "git format-patch", "get_patch_filename" in
"log-tree.c" calls "strbuf_splice" that could die with
the following message:
"`pos + len' is too far after the end of the buffer"
if you have:
buf->len < start_len + FORMAT_PATCH_NAME_MAX
but:
buf->len + suffix_len > start_len + FORMAT_PATCH_NAME_MAX
This patch tries to get rid of that bug.
[jc: w/ simplified logic]
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the documentation, it is perfectly okay to follow local
branches using the --track option. Introduce a test which checks whether
they behave the same. Currently one test fails.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users were confused about the meaning and use of the --root option.
Notably, since 68c2ec7 (format-patch: show patch text for the root
commit, 2009-01-10), --root has nothing to do with showing the patch
text for the root commit any more.
Shorten and clarify the corresponding paragraph in the DESCRIPTION
section, document --root under OPTIONS, and add an explicit note that
root commits are formatted regardless.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows manpages viewed on a tty to render inline literal
text in a manner that is distinct from the surrounding text.
The initial implementation (pre-mailing-list) of this patch
included a conditional variant of the XSLT code in
manpage-base.xsl and use xmlto's --stringparam option to
optionally enable the functionality. It turns out that
--stringparam is broken in all versions of xmlto except for the
pre-release, SVN version. Since xmlto is a shell script the patch
to fix it is simple enough, but I instead opted to use xmlto's
"module" functionality.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No files use the variant of block-title with verse-block, but
such a case would have generated broken docbook XML (<simpara> is
not allowed inside <para>). This fixes the potential deviation from
valid docbook XML.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the docbook-xsl-no-raw-roff variant match the
no-docbook-xsl-no-raw-roff variant in terms of which XML tag is
used to wrap listing block text (delimited with lines of dashes).
e920b56 (Tweak asciidoc output to work with broken docbook-xsl,
2006-03-05) says docbook-xsl 1.68 needs <literallayout>. This
<screen> usages was in the old, 1.72-only section. But since it
is now the "roff-less" section, it probably makes sense to make it
symmetric with the "roff-ful" section.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "spurious .sp" code should be independent of docbook-xsl
versions.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move a couple of XSL parameters that act to silence
informational/warning messages generated when running xmlto from
manpage-1.72.xsl to manpage-base.xsl.
Since unused parameters are silently ignored, there is no problem
if some version of docbook-xsl does not know about these
parameters. The only problem might be if a version of docbook-xsl
uses the parameters for alternate functionality. Since both
parameters have fairly specific names such a situation is
unlikely.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that the ability to use raw roff codes in asciidoc.conf
was eliminated by docbook-xsl 1.72.0 _and later_. Unlike the
1.72.0-specific XSLT problem, this behavior was not reverted in
later releases.
This patch aims to make it clear that the affected asciidoc
attribute (flag) can be reasonably used with docbook-xsl versions
other than 1.72.0.
Also, document which make variables should be set for various
versions of asciidoc and docbook-xsl.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parametrize the backslash and dot characters that are used to
generate roff control sequences in manpage-base.xsl.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of manpage-base.xsl and manpage-normal.xsl gets a copy of
the contents of callouts.xsl and the original is removed. The
Makefile is adjusted to refer to manpage-normal.xsl instead of
callouts.xsl. manpage-base.xsl will be later made into a common
base for -normal and -1.72.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most shells define the exit value of a pipeline as the exit value
of the last process. For each texi rule, run the DOCBOOK2X_TEXI
tool and the "fixup" script in their own non-pipeline commands so
that make will notice an error exit code.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adapts the "quiet make" implementation from the main
Makefile.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/http-auth:
http-push.c: use a faux remote to pass to http_init
Do not name "repo" struct "remote" in push_http.c
http.c: CURLOPT_NETRC_OPTIONAL is not available in ancient versions of cURL
http authentication via prompts
http_init(): Fix config file parsing
http.c: style cleanups
Conflicts:
http-push.c
* jc/attributes-checkout:
Add a test for checking whether gitattributes is honored by checkout.
Read attributes from the index that is being checked out
* fg/push-default:
builtin-push.c: Fix typo: "anythig" -> "anything"
Display warning for default git push with no push.default config
New config push.default to decide default behavior for push
Conflicts:
Documentation/config.txt
* dm/maint-docco:
Documentation: Remove spurious uses of "you" in git-bisect.txt.
Documentation: minor grammatical fix in git-check-ref-format.txt
Documentation: minor grammatical fixes in git-check-attr.txt
Documentation: minor grammatical fixes in git-cat-file.txt
Documentation: minor grammatical fixes and rewording in git-bundle.txt
Documentation: remove some uses of the passive voice in git-bisect.txt
the "--use-separate-remote" option no longer exists, having since
become the default for a clone.
Signed-off-by: Carlo Marcelo Arenas Belon <carenas@sajinet.com.pe>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When exporting a subset of commits on a branch that do not go back to a
root commit (e.g. master~2..master), we still want each exported commit to
have the same files in the exported tree as in the original tree.
Previously, when given such a range, we would omit master~2 as a parent of
master~1, but we would still diff against master~2 when selecting the list
of files to include in master~1. This would result in only files that
had changed in the given range showing up in the resulting export. In such
cases, we should diff master~1 against the root instead (i.e. use
diff_root_tree_sha1 instead of diff_tree_sha1).
There's a special case to consider here: incremental exports (i.e. exports
where the --import-marks flag is specified). If master~2 is an imported
mark, then we still want to diff master~1 against master~2 when selecting
the list of files to include.
We can handle all cases, including the special case, by just checking
whether master~2 corresponds to a known object mark when deciding what to
diff against.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were added by accident in a42dea3.
This patch also rewords the description of how ranges of commits can be
skipped.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid using simple variable names like 'i', since user commands are eval'ed
and may clash with and overwrite our values.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation of exec on Windows is just a rough approximation of the
POSIX behavior. In particular, no real process "overlay" happens (a new
process is spawned instead and the parent process waits until the child
terminates). In particular, the process ID cannot be taken by the exec'd
process. But there is one test in t7502-commit.sh that depends on this.
We have to skip it on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
The test sets up various shell scripts and uses them as commit message
editors. On Windows, we need a shebang line in order to recognize the
files as executable shell scripts. This adds it.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Previously, 'git diff --no-index --stat a b' generated patch output in
addition to the --stat output (or whatever other output format was
requested). Now only the requested output is generated, and patch
output remains the default.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some variables are not initialized in the Makefile, but appended to. If
the user has those variables in her environment, it will break the
build.
The variable names were found using these commands:
$ s='[ \t]';
$ S='[^ \t]';
$ comm -23 \
<(sed -n "s/^$s*\($S*\)$s$s*+=.*/\1/p" < Makefile |
sort | uniq) \
<(sed -n "s/^$s*\($S*\)$s$s*=.*/\1/p" < Makefile |
sort | uniq)
This fixes msysGit issue 216.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Increase the size of the die/warning buffer to avoid truncation
close_sha1_file(): make it easier to diagnose errors
avoid possible overflow in delta size filtering computation
The described issues are compiled from the tests by Michael Haggerty and me.
Because it is not apparent that these can be fixed anytime soon at least warn
unwary users not to rely on the inbuilt cvsimport to much.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already skip over loose refs under $GIT_DIR/refs if the name
ends with ".lock", so creating a branch named "foo.lock" will not
appear in the output of "git branch", "git for-each-ref", nor will
its commit be considered reachable by "git rev-list --all".
In the latter case this is especially evil, as it may cause
repository corruption when objects reachable only through such a
ref are deleted by "git prune".
It should be reasonably safe to deny use of ".lock" as a ref suffix.
In prior versions of Git such branches would be "phantom branches";
you can create it, but you can't see it in "git branch" output.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Long messages like those from lockfile.c when a lock can't be
obtained truncate with only 256 bytes in the message buffer.
Bump it to 1024 to give more space for these longer cases.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Properly spell "successful" and slightly rewrite a couple of strings
that actually say the same thing in order to reduce translation work.
Update .pot and .po files accordingly since no new translation is
required.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Mostly grammar, spelling and typography fixes, but also a few wording
enhancements here and there.
Signed-off-by: Sam Hocevar <sam@zoy.org>
Acked-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Before a process can be spawned by mingw_spawnve, arguments must be
surrounded by double-quotes if special characters are present. This is
necessary because the startup code of the spawned process will expand
arguments that look like glob patterns. "Normal" Windows command line
utilities expand only * and ?, but MSYS programs, including bash, are
different: They also expand braces, and this has already been taken care
of by compat/mingw.c:quote_arg().
But MSYS programs also treat single-quotes in a special way: Arguments
between single-quotes are spliced together (with spaces) into a word.
With this patch this treatment is avoided by quoting arguments that contain
single-quotes.
This lets t4252 pass on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/windows-tests:
t0060: fix whitespace in "wc -c" invocation
t5503: GIT_DEBUG_SEND_PACK is not supported on MinGW
t7004: Use prerequisite tags to skip tests that need gpg
Use prerequisites to skip tests that need unzip
t3700: Skip a test with backslashes in pathspec
Skip tests that require a filesystem that obeys POSIX permissions
t0060: Fix tests on Windows
Use prerequisite tags to skip tests that depend on symbolic links
t9100, t9129: Use prerequisite tags for UTF-8 tests
t5302: Use prerequisite tags to skip 64-bit offset tests
Skip tests that fail if the executable bit is not handled by the filesystem
t3600: Use test prerequisite tags
test-lib: Infrastructure to test and check for prerequisites
t0050: Check whether git init detected symbolic link support correctly
Tests on Windows: $(pwd) must return Windows-style paths
test-lib: Work around missing sum on Windows
test-lib: Work around incompatible sort and find on Windows
Conflicts:
t/t3000-ls-files-others.sh
A bug report with "unable to write sha1 file" made us realize that we do
not have enough information to guess why close() is failing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a 32-bit system, the maximum possible size for an object is less than
4GB, while 64-bit systems may cope with larger objects. Due to this
limitation, variables holding object sizes are using an unsigned long
type (32 bits on 32-bit systems, or 64 bits on 64-bit systems).
When large objects are encountered, and/or people play with large delta
depth values, it is possible for the maximum allowed delta size
computation to overflow, especially on a 32-bit system. When this
occurs, surviving result bits may represent a value much smaller than
what it is supposed to be, or even zero. This prevents some objects
from being deltified although they do get deltified when a smaller depth
limit is used. Fix this by always performing a 64-bit multiplication.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the rules for refnames to forbid:
(1) a refname that contains "@{" in it.
Some people and foreign SCM converter may have named their branches
as frotz@24 and we still want to keep supporting it.
However, "git branch frotz@{24}" is a disaster. It cannot even
checked out because "git checkout frotz@{24}" will interpret it as
"detach the HEAD at twenty-fourth reflog entry of the frotz branch".
(2) a refname that ends with a dot.
We already reject a path component that begins with a dot, primarily
to avoid ambiguous range interpretation. If we allowed ".B" as a
valid ref, it is unclear if "A...B" means "in dot-B but not in A" or
"either in A or B but not in both".
But for this to be complete, we need also to forbid "A." to avoid "in
B but not in A-dot". This was not a problem in the original range
notation, but we should have added this restriction when three-dot
notation was introduced.
Unlike "no dot at the beginning of any path component" rule, this
rule does not have to be "no dot at the end of any path component",
because you cannot abbreviate the tail end away, similar to you can
say "dot-B" to mean "refs/heads/dot-B".
For these reasons, it is not likely people created branches with these
names on purpose, but we have allowed such names to be used for quite some
time, and it is possible that people created such branches by mistake or
by accident.
To help people with branches with such unfortunate names to recover,
we still allow "branch -d 'bad.'" to delete such branches, and also allow
"branch -m bad. good" to rename them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change three occurences of using inconsistent error/warning reporting by
using the relevant error() / warning() calls to be consitent with the
rest of the code.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- middle button is B3 on TkAqua
- add horizontal mousehweel scrolling
- nicer default fonts
- use OSX-specific extdifftool
- remove quit menu item, call doquit on quit event
- move about & preferences menu items into apple menu
- don't set menu font
Signed-off-by: Daniel A. Steffen <das@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This simply expands the 16x16 logo image to 32x32 and provides it as
an alternative icon image.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Try to set up a 16x16 Tk photo image (based on the git logo) and use
it as window icon. The code is wrapped in a catch because it may fail
in earlier Tcl/Tk 8.4 releases that don't provide 'wm iconphoto'.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
If a patchset contains an EOF marker (Ctrl-Z) the blob diff terminates
at that point. This permits gitk to ignore the eof and continue to
display any subsequent blobs and also displays a sensible representation
of the eof char.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Some platforms like to stick extra whitespace in the output
of "wc -c"; using the result without quotes gets the shell
to collapse the whitespace.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows a common calling sequence
strbuf_branchname(&ref, name);
strbuf_splice(&ref, 0, 0, "refs/heads/", 11);
if (check_ref_format(ref.buf))
die(...);
to be refactored into
if (strbuf_check_branch_ref(&ref, name))
die(...);
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command is supposed to rename the branch we were on before switched
from to a new name, but was not aware of the short-hand notation we added
recently.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command may not be the best place to add this new feature, but
$ git check-ref-format --branch "@{-1}"
allows Porcelains to figure out what branch you were on before the last
branch switching.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function takes a user-supplied string that is supposed to be a branch
name, and puts it in a strbuf after expanding possible shorthand notation.
A handful of open coded sequence to do this in the existing code have been
changed to use this helper function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These allow you to say "git checkout @{-2}" to switch to the branch two
"branch switching" ago by pretending as if you typed the name of that
branch. As it is likely that we will be introducing more short-hands to
write the name of a branch without writing it explicitly, rename the
functions from "nth_last_branch" to more generic "branch_name", to prepare
for different semantics.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example:
git format-patch --numbered-files --stdout --attach HEAD~~
will create two messages with files 1 and 2 attached respectively.
There is no effect when using --numbered-files and --stdout together
without an --attach or --inline, the --numbered-files option will be
ignored. Add a test to show this.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently when format-patch is used with --attach or --inline the patch
attachment has the SHA1 of the commit for its filename. This replaces
the SHA1 with the filename used by format-patch when outputting to
files.
Fix tests relying on the SHA1 output and add a test showing how the
--suffix option affects the attachment filename output.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use the commit to generate the patch filename in reopen_stdout()
before we redirect stdout. The cover letter codepath creates a dummy
commit with the desired subject line 'cover letter'.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
reopen_stdout() usually takes the oneline subject of a commit,
appends the patch suffix, prepends the output directory (if any) and
then reopens stdout as the resulting file. Now the patch filename (the
oneline subject and the patch suffix) is created in
get_patch_filename() and passed to reopen_stdout() which prepends the
output directory and reopens stdout as that file.
The original function to get the oneline description,
get_oneline_for_filename(), has been renamed to get_patch_filename() to
reflect its new functionality.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This specifier represents the sanitized and filename friendly subject
line of a commit. No checks are made against the length of the string,
so users may need to trim the result to the desired length if using as a
filename. This is commonly used by format-patch to massage commit
subjects into filenames and output patches to files.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit also converts all reference specifications to a monospaced font,
as the embedded ~ character used in some of the references sometimes causes
the text up to the next ~ to be displayed incorrectly as a subscript when the
HTML pages are generated. This was tested with asciidoc 8.2.5.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --staged option (synonym for --cached) isn't listed in the
completion choices for git diff. This tiny patch adds it.
Trivially-Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, it is hard to guess why the fetch failed.
Make sure we at least mention that the repository must be bare.
Also the current branch is printed.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the index says that the file in the work tree that corresponds to the
blob object that is used for comparison is known to be unchanged, "diff"
reads from the file and applies convert_to_git(), instead of inflating the
object, to feed the internal diff engine with, because an earlier
benchnark found that it tends to be faster to use this optimization.
However, the index can lie when the path is marked as assume-unchanged.
Disable the optimization for such paths.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When preparing temporary files for an external diff or textconv, it is
easier on the external tools, especially when they are implemented using
platform tools, if they are fed the input after convert_to_working_tree().
This fixes msysGit issue 177.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation of the post-checkout hook just talks
about git-checkout. But recently git-clone was changed to
call it too, unless the -no-checkout (-n) option is used.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'Everyday GIT' guide was using the old dashed form
of git-init.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The data structure used to store this list is a string_list
of sources with the destination in the util member. The
current code just sorts on the source; if a single source is
pushed to two different destination refs at a remote, then
the order in which they are printed is non-deterministic.
This patch implements a comparison using both fields.
Besides being a little nicer on the eyes, giving a stable
sort prevents false negatives in the test suite when
comparing output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test opens fd 3 and instructs git-upload-pack (via GIT_DEBUG_SEND_PACK)
to log information to that channel.
The way in which new processes are spawned by git on MinGW does not inherit
all file descriptors to the child processes, but only 0, 1, and 2.
The tests in t5503 require that file descriptor 3 is inherited from
git-fetch to git-upload-pack.
A complete implementation is non-trivial and not warranted just to satisfy
this test. Note that the incompleteness applies only to the executables
that use compat/mingw.c; bash and perl (the other important executables
used by git) are complete, of course.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
The tests are skipped if no gpg was found or if gpg is version 1.0.6.
Previously, the latter condition was checked a bit later in the test file
so that the tag verification tests would be exercised. These are now
skipped as well, but only because we would need a facility to revoke a
test prerequisite, which we do not have.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
The test verifies that glob special characters can be escaped with
backslashes. In particular, the string fo\[ou\]bar is given to git.
On Windows, this does not work because backslashes are first of all
directory separators, and first thing git does with a pathspec from the
command line is to convert backslashes to forward slashes.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Since the MSYS bash mangles absolute paths that it passes as command line
arguments to non-MSYS progams (such as git or test-path-utils), we have to
bend over backwards to squeeze some usefulness out of the existing tests.
In particular, a set of path normalization tests is added that test
relative paths. Some paths in the ancestor path tests are adjusted to help
MSYS bash's path mangling heuristics.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Many tests depend on that symbolic links work. This introduces a check
that sets the prerequisite tag SYMLINKS if the file system supports
symbolic links. Since so many tests have to check for this prerequisite,
we do the check in test-lib.sh, so that we don't need to repeat the test
in many scripts.
To check for 'ln -s' failures, you can use a FAT partition on Linux:
$ mkdosfs -C git-on-fat 1000000
$ sudo mount -o loop,uid=j6t,gid=users,shortname=winnt git-on-fat /mnt
Clone git to /mnt and
$ GIT_SKIP_TESTS='t0001.1[34] t0010 t1301 t403[34] t4129.[47] t5701.7
t7701.3 t9100 t9101.26 t9119 t9124.[67] t9200.10 t9600.6' \
make test
(These additionally skipped tests depend on POSIX permissions that FAT on
Linux does not provide.)
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
The effects of this patch can be tested on Linux by commenting out
#define _FILE_OFFSET_BITS 64
in git-compat-util.h.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
There are two prerequisites:
- The filesystem supports names with tabs or new-lines.
- Files cannot be removed if their containing directory is read-only.
Previously, whether these preconditions are satisified was tested inside
test_expect_success. We move these tests outside because, strictly
speaking, they are not part of the tests.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
* dm/maint-docco:
Documentation: reword example text in git-bisect.txt.
Documentation: reworded the "Description" section of git-bisect.txt.
Documentation: minor grammatical fixes in git-branch.txt.
Documentation: minor grammatical fixes in git-blame.txt.
Documentation: reword the "Description" section of git-bisect.txt.
Documentation: minor grammatical fixes in git-archive.txt.
The code will end up calling lstat() to check whether the
file still exists; obviously this doesn't work if we're not
in the worktree.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --pickaxe-regex is used, forward past the end of matches instead of
advancing to the byte after their start. This way matches count only
once, even if the regular expression matches their tail -- like in the
fixed-string fork of the code.
E.g.: /.*/ used to count the number of bytes instead of the number of
lines. /aa/ resulted in a count of two in "aaa" instead of one.
Also document the fact that regexec() needs a NUL-terminated string as
its second argument by adding an assert().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/maint-submodule-normalize-path:
git submodule: Fix adding of submodules at paths with ./, .. and //
git submodule: Add test cases for git submodule add
* js/maint-1.6.0-path-normalize:
Remove unused normalize_absolute_path()
Test and fix normalize_path_copy()
Fix GIT_CEILING_DIRECTORIES on Windows
Move sanitary_path_copy() to path.c and rename it to normalize_path_copy()
Make test-path-utils more robust against incorrect use
For example:
git format-patch --numbered-files --stdout --attach HEAD~~
will create two messages with files 1 and 2 attached respectively.
Without --attach/--inline but with --stdout, --numbered-files option
can be simply ignored, because we are not creating any file ourselves.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If pack-objects is called with the --unpack-unreachable option then it
will unpack (i.e. loosen) all unreferenced objects from local not-kept
packs, including those that also exist in packs residing in an alternate
object database or a locally kept pack. The only user of this option is
git-repack.
In this case, repack will follow the call to pack-objects with a call to
prune-packed, which will delete these newly loosened objects, making the
act of loosening a waste of time. The unnecessary loosening can be
avoided by checking whether an object exists in a non-local pack or a
locally kept pack before loosening it.
This fixes the 'local packed unreachable obs that exist in alternate ODB
are not loosened' test in t7700.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let PATH0=$PATH that was set before the invocation.
Let /foo be a build directory.
Let /pfx be the installation prefix.
Let pfxexecpath=/pfx/libexec/git-core.
The following is going on when 'git --exec-path=/foo gc' is invoked:
1. git sets PATH=/foo:$PATH0 using the path from --exec-path
2. gc execs 'git repack' (note: no dash).
3. Since there is a git in /foo (it's a build directory), /foo/git is
taken.
4. No explicit exec-path is set this time, hence, this secondary git sets
PATH=$pfxexecpath:/foo:$PATH
5. Since 'repack' is not a built-in, execv_dashed_external execs
'git-repack' (note: dash).
6. There is a $pfxexecpath/git-repack, and it is taken.
7. This git-repack runs 'git pack-objects' (note: no dash).
8. There is no git in $pfxexecpath, but there is one in /foo. Hence,
/foo/git is run.
9. pack-objects is a builtin, hence, in effect /foo/git-pack-objects
is run.
As you can see, the way in which we previously set the PATH allowed to
mix gits of different vintage. By setting GIT_EXEC_PATH when --exec-path
was given on the command line, we reduce the confusion.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an unreferenced object exists in both a local pack and in either a pack
residing in an alternate object database or a local kept pack, then the
pack-objects call made by repack will loosen that object only to have it
immediately pruned by repack's call to prune-packed.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it more pleasant to read about a branch deletion by adding "was".
Jeff King suggested this, and I ignored it. He was right.
Update t3200 test again to match the change in output.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests can be run only if a particular prerequisite is available. For
example, some tests require that an UTF-8 locale is available. Here we
introduce functions that are used in this way:
1. Insert code that checks whether the prerequisite is available. If it is,
call test_set_prereq with an arbitrary tag name that subsequently can be
used to check for the prerequisite:
case $LANG in
*.utf-8)
test_set_prereq UTF8
;;
esac
2. In the calls to test_expect_success pass the tag name:
test_expect_success UTF8 '...description...' '...tests...'
3. There is an auxiliary predicate that can be used anywhere to test for
a prerequisite explicitly:
if test_have_prereq UTF8
then
...code to be skipped if prerequisite is not available...
fi
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
This makes sure that timestamps and ordering on branches is not influenced
by a fix for cvsps.
The test extension does not deal which patchset correction on branches it
only verifes that branches are basically handled as before.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some cvs repositories may have time deviations in their recorded commits.
This is a test for one of such cases. These kind of repositories can happen
if the system time of cvs clients is not fully synchronised.
Consider the following sequence of events:
* client A commits file a r1.1
* client A commits file a r1.2, b r1.1
* client B commits file b r1.2 using the same timestamp as a r1.1
This can be resolved but due to cvsps ordering its patchsets solely based
on the timestamp. It only takes revision odering into account if there
is no difference in the timestamp.
I hit this bug when importing from a real repository which was originally
converted from another rcs based scm. Other import tools can handle this
correctly, e.g. parsecvs.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a merge conflict occurs in a file with spaces in the filename,
git-gui showed wrongly "LOCAL: deleted".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We have PidFile definition in the file already, and we have added
necessary LoadModule for log_config_module recently.
This patch will end up giving LockFile to everybody not just limited to
Darwin, but why not?
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mv/parseopt-ls-files:
ls-files: fix broken --no-empty-directory
t3000: use test_cmp instead of diff
parse-opt: migrate builtin-ls-files.
Turn the flags in struct dir_struct into a single variable
Conflicts:
builtin-ls-files.c
t/t3000-ls-files-others.sh
* bw/autoconf:
configure: rework pthread handling to allow for user defined flags
configure: make iconv tests aware of user arguments
configure: asciidoc version test cleanup
configure: wrap some library tests with GIT_STASH_FLAGS
configure: add macros to stash FLAG variables
configure: reorganize flow of argument checks
configure: ensure settings from user are also usable in the script
* xx/db-refspec-vs-js-remote:
Support '*' in the middle of a refspec
Keep '*' in pattern refspecs
Use the matching function to generate the match results
Use a single function to match names against patterns
Make clone parse the default refspec with the normal code
* fc/parseopt-config:
config: test for --replace-all with one argument and fix documentation.
config: set help text for --bool-or-int
git config: don't allow --get-color* and variable type
git config: don't allow extra arguments for -e or -l.
git config: don't allow multiple variable types
git config: don't allow multiple config file locations
git config: reorganize to use parseopt
git config: reorganize get_color*
git config: trivial rename in preparation for parseopt
git_config(): not having a per-repo config file is not an error
This option to pack-objects/rev-list was created to improve the -A and -a
options of repack. It was found to be lacking in that it did not provide
the ability to differentiate between local and non-local kept packs, and
found to be unnecessary since objects residing in local kept packs can be
filtered out by the --honor-pack-keep option.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two features were invented for use by repack when repack will delete
the local packs that have been made redundant. The packs accessible
through alternates are not deleted by repack, so the objects contained in
them are still accessible after the local packs are deleted. They do not
need to be repacked into the new pack or loosened. For the case of
loosening they would immediately be deleted by the subsequent prune-packed
that is called by repack anyway.
This fixes the test
'packed unreachable obs in alternate ODB are not loosened' in t7700.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --kept-pack-only option to pack-objects treats all kept packs as equal.
This results in objects that reside in an alternate pack that has a .keep
file, not being packed into a newly created pack when the user specifies the
-a option to repack. Since the user may not have any control over the
alternate database, git should not refrain from repacking those objects
even though they are in a pack with a .keep file.
This fixes the 'packed obs in alternate ODB kept pack are repacked' test in
t7700.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1) The new --kept-pack-only mechansim of rev-list/pack-objects has
replaced --unpacked=. This new mechansim does not operate solely on
"local" packs now. The result is that objects residing in an alternate
pack which has a .keep file will not be repacked with repack -a.
This flaw is only apparent when a commit object is the one residing in
an alternate kept pack.
2) The 'repack unpacked objects' and 'loosen unpacked objects' mechanisms
of pack-objects, i.e. --keep-unreachable and --unpack-unreachable,
now do not operate solely on local packs. The --keep-unreachable
option no longer has any callers, but --unpack-unreachable is used when
repack is called with '-A -d' and the local repo has existing packs.
In this case, objects residing in alternate, not-kept packs will be
loosened, and then immediately deleted by repack's call to
prune-packed.
The test must manually call pack-objects to avoid the call to
prune-packed that is made by repack when -d is used.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original bug will not honor new entries in gitattributes if they
are changed in the same checkout as the files they affect.
It will also keep using .gitattributes, even if it is deleted in the
same commit as the files it affects.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be less object code and may be even faster, even if at the
moment there is no callers to take an advantage of that. This
implementation can be trivially made inlinable later.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An error message is already printed by sha1_object_info itself, and
the failed entries are additionally marked in the listing.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid splitting sentences across examples of command usage.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The import-tars script is typically employed to (re)create the past
history of a project from stored tars. Although assigning authorship in
these cases can be a somewhat arbitrary process, it makes sense to set
the author to whoever created the tars in the first place (if it's
known), and (s)he can in general be different from the committer
(whoever is running the script).
Implement this by having separate author and committer data, making them
settable from the usual GIT_* environment variables.
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The multiline reflog format (e.g., as shown by "git log -g")
will show HEAD@{<date>} rather than HEAD@{<count>} in two
situations:
1. If the user gave branch@{<date>} syntax to specify the
reflog
2. If the user gave a --date=<format> specifier
It uses the "normal" date format in case 1, and the
user-specified format in case 2.
The oneline reflog format (e.g., "git reflog show" or "git
log -g --oneline") will show the date in the same two
circumstances. However, it _always_ shows the date as a
relative date, and it always ignores the timezone.
In case 2, it seems ridiculous to trigger the date but use a
format totally different from what the user requested.
For case 1, it is arguable that the user might want to see
the relative date by default; however, the multiline version
shows the normal format.
This patch does three things:
- refactors the "relative_date" parameter to
show_reflog_message to be an actual date_mode enum,
since this is how it is used (it is passed to show_date)
- uses the passed date_mode parameter in the oneline
format (making it consistent with the multiline format)
- does not ignore the timezone parameter in oneline mode
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/windows-tests:
t5602: Work around path mangling on MSYS
t5300, t5302, t5303: Do not use /dev/zero
t2200, t7004: Avoid glob pattern that also matches files
t7300: fix clean up on Windows
test-lib: Introduce test_chmod and use it instead of update-index --chmod
test-lib: Simplify test counting.
test-lib: Replace uses of $(expr ...) by POSIX shell features.
Call 'say' outside test_expect_success
test suite: Use 'say' to say something instead of 'test_expect_success'
t9400, t9401: Do not force hard-linked clone
Many tests pass $(pwd) in some form to git and later test that the output
of git contains the correct value of $(pwd). For example, the test of
'git remote show' sets up a remote that contains $(pwd) and then the
expected result must contain $(pwd).
Again, MSYS-bash's path mangling kicks in: Plain $(pwd) uses the MSYS style
absolute path /c/path/to/git. The test case would write this name into
the 'expect' file. But when git is invoked, MSYS-bash converts this name to
the Windows style path c:/path/to/git, and git would produce this form in
the result; the test would fail.
We fix this by passing -W to bash's pwd that produces the Windows-style
path.
There are a two cases that need an accompanying change:
- In t1504 the value of $(pwd) becomes part of a path list. In this case,
the lone 'c' in something like /foo:c:/path/to/git:/bar inhibits
MSYS-bashes path mangling; IOW in this case we want the /c/path/to/git
form to allow path mangling. We use $PWD instead of $(pwd), which always
has the latter form.
- In t6200, $(pwd) - the Windows style path - must be used to construct the
expected result because that is the path form that git sees. (The change
in the test itself is just for consistency: 'git fetch' always sees the
Windows-style path, with or without the change.)
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
t1002-read-tree-m-u-2way.sh uses 'sum', but it does not rely on the exact
form of the sum, only that it is a hash digest. Therefore, we can sneak
in 'md5sum' under the name 'sum'.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
If the PATH lists the Windows system directories before the MSYS
directories, Windows's own incompatible sort and find commands would be
picked up. We implement these commands as functions and call the real
tools by absolute path.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
MSYS's bash rewrites /something/bin/... into a Windows path that looks like
c:/msysgit/something/bin/... before git sees it. But later the test case
verifies that the path was used and compares it to the unmangled version.
This fails, of course. This make the path relative so that the path
mangling is not triggered.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
We do not have /dev/zero on Windows. This replaces it by data generated
with printf, perl, or echo. Most of the cases do not depend on that the
data is a stream of zero bytes, so we use something printable; nor is an
unlimited stream of data needed, so we produce only as many bytes as the
test cases need.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
On Windows, there is an unfortunate interaction between the MSYS bash and
git's command line processing:
- Since Windows's CMD does not do the wildcard expansion, but passes
arguments like path* through to the programs, the programs must do the
expansion themselves. This happens in the startup code before main() is
entered.
- bash, however, passes the argument "path*" to git, assuming that git will
see the unquoted word unchanged as a single argument.
But actually git expands the unquoted word before main() is entered.
In t2200, not all names that the test case is interested in exist as files
at the time when 'git ls-files' is invoked. git expands "path?" to only
the subset of files the exist, and only that subset was listed, so that the
test failed. We now list all interesting paths explicitly.
In t7004, git exanded the pattern "*a*" to "actual" (the file that stdout
was redirected to), which is not what the was tested for. We fix it by
renaming the output file (and removing any existing files matching *a*).
This was originally fixed by Johannes Schindelin.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
On Windows, you cannot remove files that are in use, not even with
'rm -rf'. So we need to run 'exec <foo/bar' inside a subshell lest
removing the whole test repository fail.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
This function replaces sequences of 'chmod +x' and 'git update-index
--chmod=+x' in the test suite, whose purpose is to help filesystems
that need core.filemode=false. Two places where only 'chmod +x' was used
we also use this new function.
The function calls 'git update-index --chmod' without checking
core.filemode (unlike some of the call sites did). We do this because the
call sites *expect* that the executable bit ends up in the index (ie. it
is not the purpose of the call sites to *test* whether git treats
'chmod +x' and 'update-index --chmod=+x' correctly). Therefore, on
filesystems with core.filemode=true the 'git update-index --chmod' is a
no-op.
The function uses --add with update-index to help one call site in
t6031-merge-recursive. It makes no difference for the other callers.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Since the test case counter was incremented very late, there were a few
users of the counter had to do their own incrementing. Now we increment it
early and simplify these users.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
In particular:
- Test case counting can be achieved by arithmetic expansion.
- The name of the test, e.g. t1234, can be computed with ${0%%} and ${0##}.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
There were some uses of 'say' inside test_expect_success. But if the tests
were not run in verbose mode, this message went to /dev/null. Pull them out
of test_expect_success.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Some tests report that some tests will be skipped. They used
'test_expect_success' with a trivially successful test. Nowadays we have
the helper function 'say' for this purpose.
In on case, 'say_color skip' is replaced by 'say' because the former is
not intended as a public API.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
This patch allows http_push to use http authentication via prompts.
You may notice that there is a remote struct that only contains the
url from the repo struct. This struct is a temporary fix for a larger
issue, but gets http authentication via prompts out the door, and
keeps users from having to store passwords in plain text files.
Signed-off-by: Amos King <amos.l.king@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch is a first step in getting http-push to use http authentication
via prompts. The patch renames remote to repo so that it doesn't get
confusing with the same remote that is passed around when using http.
Signed-off-by: Amos King <amos.l.king@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing text was very vague about what exactly it means
for difference to "contain" a change. This seems to cause
confusion on the mailing list every month or two.
To fix it we:
1. use "introduce or remove an instance of" instead of
"contain"
2. point the user to gitdiffcore(7), which contains a more
complete explanation
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the options --committer-date-is-author-date and --ignore-date
to git-rebase. They were introduced in commit a79ec62d0 for git-am.
These options imply --force-rebase.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add USE_WIN32_MMAP which triggers the use of windows' native
file memory mapping functionality in git_mmap()/git_munmap() functions.
As git functions currently use mmap with MAP_PRIVATE set only, this
implementation supports only that mode for now.
On Windows, offsets for memory mapped files need to match the allocation
granularity. Take this into account when calculating the packed git-
windowsize and file offsets. At the moment, the only function which makes
use of offsets in conjunction with mmap is use_pack() in sha1-file.c.
Git fast-import's code path tries to map a portion of the temporary
packfile that exceeds the current filesize, i.e. offset+length is
greater than the filesize. The NO_MMAP code worked with that since pread()
just reads the file content until EOF and returns gracefully, while
MapViewOfFile() aborts the mapping and returns 'Access Denied'.
Working around that by determining the filesize and adjusting the length
parameter.
Signed-off-by: Janos Laube <janos.dev@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default was not to change the window or depth at all. As suggested
by Jon Smirl, Linus Torvalds and others, default to
--window=250 --depth=250
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid a segfault when the command
git log --all-match
was issued, by ignoring the option.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The options "--binary" and "--allow-binary-replacement" of
git-apply are no-op and maintained for backward compatibility,
so avoid to show them in the short help screen.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hide the patch filename output from 'git format-patch' when --quiet
is used. The man pages suggested that this should have already worked.
Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests do not depend on that the clones are hard-linked, but used
--local only as an optimization: At the time that --local was used first
in t9400 hard-linked clones were not the default, yet.
By removing --local, we help filesystems that do not support hard-links.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
setup_revisions() while getting the command line arguments parses the
given commits from the command line, which means their direct parents will
not be rewritten by the custom graft file.
Call read_ancestry() early to work around this issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/color-grep:
grep: prefer builtin over external one when coloring results
grep: cast printf %.*s "precision" argument explicitly to int
grep: add support for coloring with external greps
grep: color patterns in output
grep: add pmatch and eflags arguments to match_one_pattern()
grep: remove grep_opt argument from match_expr_eval()
grep: micro-optimize hit collection for AND nodes
* js/remote-improvements: (23 commits)
builtin-remote.c: no "commented out" code, please
builtin-remote: new show output style for push refspecs
builtin-remote: new show output style
remote: make guess_remote_head() use exact HEAD lookup if it is available
builtin-remote: add set-head subcommand
builtin-remote: teach show to display remote HEAD
builtin-remote: fix two inconsistencies in the output of "show <remote>"
builtin-remote: make get_remote_ref_states() always populate states.tracked
builtin-remote: rename variables and eliminate redundant function call
builtin-remote: remove unused code in get_ref_states
builtin-remote: refactor duplicated cleanup code
string-list: new for_each_string_list() function
remote: make match_refs() not short-circuit
remote: make match_refs() copy src ref before assigning to peer_ref
remote: let guess_remote_head() optionally return all matches
remote: make copy_ref() perform a deep copy
remote: simplify guess_remote_head()
move locate_head() to remote.c
move duplicated ref_newer() to remote.c
move duplicated get_local_heads() to remote.c
...
Conflicts:
builtin-clone.c
* kb/checkout-optim:
Revert "lstat_cache(): print a warning if doing ping-pong between cache types"
checkout bugfix: use stat.mtime instead of stat.ctime in two places
Makefile: Set compiler switch for USE_NSEC
Create USE_ST_TIMESPEC and turn it on for Darwin
Not all systems use st_[cm]tim field for ns resolution file timestamp
Record ns-timestamps if possible, but do not use it without USE_NSEC
write_index(): update index_state->timestamp after flushing to disk
verify_uptodate(): add ce_uptodate(ce) test
make USE_NSEC work as expected
fix compile error when USE_NSEC is defined
check_updates(): effective removal of cache entries marked CE_REMOVE
lstat_cache(): print a warning if doing ping-pong between cache types
show_patch_diff(): remove a call to fstat()
write_entry(): use fstat() instead of lstat() when file is open
write_entry(): cleanup of some duplicated code
create_directories(): remove some memcpy() and strchr() calls
unlink_entry(): introduce schedule_dir_for_removal()
lstat_cache(): swap func(length, string) into func(string, length)
lstat_cache(): generalise longest_match_lstat_cache()
lstat_cache(): small cleanup and optimisation
As far as I know, not all grep programs support coloring, so we should
rely on builtin grep. If you want external grep, set
color.grep.external to empty string.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code will end up calling lstat() to check whether the
file still exists; obviously this doesn't work if we're not
in the worktree.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git branch -f a b' resets a to b when a exists, rather then deleting a.
Say so in the documentation.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --pickaxe-regex is used, forward past the end of matches instead of
advancing to the byte after their start. This way matches count only
once, even if the regular expression matches their tail -- like in the
fixed-string fork of the code.
E.g.: /.*/ used to count the number of bytes instead of the number of
lines. /aa/ resulted in a count of two in "aaa" instead of one.
Also document the fact that regexec() needs a NUL-terminated string as
its second argument by adding an assert().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a git push without any refspecs is attempted, display a warning.
The current default behavior is to push all matching refspecs, which
may come as a surprise to new users, so the warning shows how
push.default can be configured and what the possible values are.
Traditionalists who wish to keep the current behaviour are also told
how to configure this once and never see the warning again.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git push" is not told what refspecs to push, it pushes all matching
branches to the current remote. For some workflows this default is not
useful, and surprises new users. Some have even found that this default
behaviour is too easy to trigger by accident with unwanted consequences.
Introduce a new configuration variable "push.default" that decides what
action git push should take if no refspecs are given or implied by the
command line arguments or the current remote configuration.
Possible values are:
'nothing' : Push nothing;
'matching' : Current default behaviour, push all branches that already
exist in the current remote;
'tracking' : Push the current branch to whatever it is tracking;
'current' : Push the current branch to a branch of the same name,
i.e. HEAD.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several old tests were written before test_cmp was introduced, convert
these to test_cmp.
If were are at it, fix the order of the arguments where necessary to
make expected come first, so the command shows how the test result
deviates from the correct output.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If literal text (asciidoc `...`) can be rendered in a differently from
normal text for each output format (man, HTML), then we do not need
extra quotes or other wrapping around inline literal text segments.
config.txt
Change '`...`' to `...`. In asciidoc, the single quotes provide
emphasis, literal text should be distintive enough.
Change "`...`" to `...`. These double quotes do not work if present
in the described config value, so drop them.
git-checkout.txt
Change "`...`" to `...` or `"..."`. All instances are command line
argument examples. One "`-`" becomes `-`. Two others are involve
curly braces, so move the double quotes inside the literal region to
indicate that they might need to be quoted on the command line of
certain shells (tcsh).
git-merge.txt
Change "`...`" to `...`. All instances are used to describe merge
conflict markers. The quotes should are not important.
git-rev-parse.txt
Change "`...`" to `...`. All instances are around command line
arguments where no in-shell quoting should be necessary.
gitcli.txt
Change `"..."` to `...`. All instances are around command line
examples or single command arguments. They do not semanticly belong
inside the literal text, and they are not needed outside it.
glossary-content.txt
user-manual.txt
Change "`...`" to `...`. All instances were around command lines.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is broken because of the tricks we have to play with
lstat to get the bearable perfomance out of the call.
Sadly, it disables access to Cygwin's executable attribute,
which Windows filesystems do not have at all.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 7734f04873.
I guess that the reverted commit, 7734f048, has been in test long
enough, and should now be reverted. I have not received any info
regarding any debug output of the reverted commit, so lets hope that
the lstat_cache() function do not cause any ping-pong.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reword this section to make it less chatty. Also make minor grammatical
fixes.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Option --replace-all only allows at least two arguments, so
documentation was needing to be updated accordingly. A test showing
that the command fails with only one parameter is also provided.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function translates many possible Win32 error codes to suitable
errno numbers. We will use it in our wrapper functions that need to call
into Win32.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather shrink the input field for "Create New Repository" and "Open
Existing Repository" as it's already done for "Clone Existing
Repository".
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Introduce variables GIT_TEST_INSTALLED and GIT_TEST_EXEC_PATH such that
the test suite can be run against a git which is installed at
GIT_TEST_INSTALLED with subcommands at GIT_TEST_EXEC_PATH.
GIT_TEST_INSTALLED defaults to the git.git checkout, GIT_TEST_EXEC_PATH
defaults to the output of '$GIT_TEST_INSTALLED/git --exec-path'.
Run the suite e.g. as
GIT_TEST_INSTALLED=/some/path make test
but note that this requires and uses parts of a compiled git in the
git.git checkout: test helpers, templates and perl libraries are taken
from there.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It just happens so that when GIT_EXEC_PATH points to a compiled checkout
of git.git it contains "git". Since this is not true in general make
test-lib check for "git-init" which is always in GIT_EXEC_PATH.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config file is not the only place remotes are defined, and without
consulting .git/remotes and .git/branches, you won't know if "origin" is
configured by the user. Don't give up too early and insult the user with
a wisecrack "Where do you want to fetch from today?"
The only thing the previous patch seems to want to prevent from happening
is a lazy "git fetch/push" that does not say where-from/to to produce an
error message 'origin not found', and we can do that by not letting
add_url_alias() to turn a nickname "origin" literally into a pathname
"origin" without changing the rest of the logic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
http-push.c::finish_request():
request is initialized by the for loop
index-pack.c::free_base_data():
b is initialized by the for loop
merge-recursive.c::process_renames():
move compare to narrower scope, and remove unused assignments to it
remove unused variable renames2
xdiff/xdiffi.c::xdl_recs_cmp():
remove unused variable ec
xdiff/xemit.c::xdl_emit_diff():
xche is always overwritten
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e1afca4fd "write_index(): update index_state->timestamp after
flushing to disk" on 2009-02-23 used stat.ctime to record the
timestamp of the index-file. This is wrong, so fix this and use the
correct stat.mtime timestamp instead.
Commit 110c46a909 "Not all systems use st_[cm]tim field for ns
resolution file timestamp" on 2009-03-08, has a similar bug for the
builtin-fetch-pack.c file.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earlier code meant to attempt to strip everything except the test
number, but only stripped the part starting with the last dash.
However, there is no reason why we should not use the whole basename.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These variables were always overwritten or the assigned
value was unused:
builtin-diff-tree.c::cmd_diff_tree(): nr_sha1
builtin-for-each-ref.c::opt_parse_sort(): sort_tail
builtin-mailinfo.c::decode_header_bq(): in
builtin-shortlog.c::insert_one_record(): len
connect.c::git_connect(): path
imap-send.c::v_issue_imap_cmd(): n
pretty.c::pp_user_info(): filler
remote::parse_refspec_internal(): llen
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to selectively skip tests, the environment variable GIT_SKIP_TESTS
can be set like this:
$ GIT_SKIP_TESTS='t1301 t4150.18' make test
That is, its value can contain only the test script numbers, but not the
full script name. Therefore, it is important that the test scripts are
uniquely numbered. This makes it so.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally we used .gitattributes file from the work tree if exists,
and otherwise read from the index as a fallback. When switching to a
branch that has an updated .gitattributes file, and entries in it give
different attributes to other paths being checked out, we should instead
read from the .gitattributes in the index.
This breaks a use case of fixing incorrect entries in the .gitattributes
in the work tree (without adding it to the index) and checking other paths
out, though.
$ edit .gitattributes ;# mark foo.dat as binary
$ rm foo.dat
$ git checkout foo.dat
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.0:
bisect: fix another instance of eval'ed string
bisect: fix quoting TRIED revs when "bad" commit is also "skip"ped
Support "\" in non-wildcard exclusion entries
Conflicts:
git-bisect.sh
The tests for POSIX threads can now be controlled by the user with the
--enable-pthreads=FLAGS option. If this is set (to some value other
than yes or no), the value is passed to the compiler. Thread support
is based solely on the outcome of this test. The user may specify not
to use threading at all or to use the default tests (first -pthread
then -lpthread) by not specifying FLAGS when passing --enable-pthreads.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--with-iconv is now taken into account when doing the tests for iconv.
If the user requests alternate handling for libiconv, the -liconv test
is run before the -lc test.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Redirect stderr to /dev/null instead of stdout. This discards warnings
generated by python 2.6 related to the reorganization of functions within
modules. The warnings were causing the version detection to break.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Libraries that can have user specificed base paths are wrapped with
GIT_STASH_FLAGS/GIT_UNSTASH_FLAGS to ensure that the proper versions
on the system are tested. This ensures, for example, that the zlib
tests for deflateUnbound are done with the version of zlib requested
by the user. This is most useful in the absence of good settings for
CPPFLAGS and/or LDFLAGS.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow for quick stash/unstash of CPPFLAGS and LDFLAGS. Library tests
can now be easily bracketted with these macros to allow for values
set in user/site arguments.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the argument tests from the 'site overrides' so that they are
ahead of any library tests. This allows for library tests to take
user specified paths into account. The intent here is to avoid things
like NO_DEFLATE_BOUND being set due to finding old zlib when the user
has specified an alternate location for zlib. (Ignore the fact that
properly set *FLAGS can avoid solve this issue.)
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow things set by the user (--with-lib, --with-iconv, etc) to set
variables for use by other parts of the script. Display values as
they're set.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Besides, we have already called easy_setopt with the option before coming
to this function if it was available, so there is no need to repeat it
here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ks/maint-1.6.0-mailinfo-folded:
mailinfo: tests for RFC2047 examples
mailinfo: add explicit test for mails like '<a.u.thor@example.com> (A U Thor)'
mailinfo: 'From:' header should be unfold as well
mailinfo: correctly handle multiline 'Subject:' header
* js/maint-1.6.1-remote-remove-mirror:
builtin-remote: make rm operation safer in mirrored repository
builtin-remote: make rm() use properly named variable to hold return value
* ks/maint-1.6.0-mailinfo-folded:
mailinfo: tests for RFC2047 examples
mailinfo: add explicit test for mails like '<a.u.thor@example.com> (A U Thor)'
mailinfo: 'From:' header should be unfold as well
mailinfo: correctly handle multiline 'Subject:' header
"git read-tree A B C..." without the "-m" (merge) option is a way to read
these trees on top of each other to get an overlay of them.
An ancient commit ee6566e (Rewrite read-tree, 2005-09-05) passed the
ADD_CACHE_SKIP_DFCHECK flag when calling add_index_entry() to add the
paths obtained from these trees to the index, but it is an incorrect use
of the flag. The flag is meant to be used by callers who know the
addition of the entry does not introduce a D/F conflict to the index in
order to avoid the overhead of checking.
This bug resulted in a bogus index that records both "x" and "x/z" as a
blob after reading three trees that have paths ("x"), ("x", "y"), and
("x/z", "y") respectively. 34110cd (Make 'unpack_trees()' have a separate
source and destination index, 2008-03-06) refactored the callsites of
add_index_entry() incorrectly and added more codepaths that use this flag
when it shouldn't be used.
Also, 0190457 (Move 'unpack_trees()' over to 'traverse_trees()' interface,
2008-03-05) introduced a bug to call add_index_entry() for the tree that
does not have the path in it, passing NULL as a cache entry. This caused
reading multiple trees, one of which has path "x" but another doesn't, to
segfault.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rearrange the example usage of
git filter-branch --index-filter 'git rm --cached ...'
so that --ignore-unmatch is in the main example block. People keep
stumbling over the (lack of this) option to the point where it is a
FAQ, so we would want to expose the most common usage where it stands
out.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users have different mergetool and difftool settings, so teach
difftool to read config vars from the difftool.* namespace. This allows
having distinct configurations for the diff and merge scenarios.
We don't want to force existing users to set new values for no reason
so difftool falls back to existing mergetool config variables when the
difftool equivalents are not defined.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
3e0c4ff (send-email: respect in-reply-to regardless of threading,
2009-03-01) fixed the handling of the In-Reply-To header when both
--no-thread and --in-reply-to are in effect. Add a test for it.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-send-email:
send-email: don't create temporary compose file until it is needed
send-email: --suppress-cc improvements
send-email: handle multiple Cc addresses when reading mbox message
send-email: allow send-email to run outside a repo
* mg/maint-submodule-normalize-path:
git submodule: Fix adding of submodules at paths with ./, .. and //
git submodule: Add test cases for git submodule add
* jc/maint-1.6.0-keep-pack:
is_kept_pack(): final clean-up
Simplify is_kept_pack()
Consolidate ignore_packed logic more
has_sha1_kept_pack(): take "struct rev_info"
has_sha1_pack(): refactor "pretend these packs do not exist" interface
git-repack: resist stray environment variable
* tr/format-patch-thread:
format-patch: support deep threading
format-patch: thread as reply to cover letter even with in-reply-to
format-patch: track several references
format-patch: threading test reactivation
Conflicts:
builtin-log.c
* tr/gcov:
Test git-patch-id
Test rev-list --parents/--children
Test log --decorate
Test fsck a bit harder
Test log --graph
Test diff --dirstat functionality
Test that diff can read from stdin
Support coverage testing with GCC/gcov
LoadModule directive for log_config_module will not work if the module is
built-in.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes the last parameter of recv_sideband, by which the callers
told which channel bands #2 and #3 should be written to.
Sayeth Shawn Pearce:
The definition of the streams in the current sideband protocol
are rather well defined for the one protocol that uses it,
fetch-pack/receive-pack:
stream #1: pack data
stream #2: stderr messages, progress, meant for tty
stream #3: abort message, remote is dead, goodbye!
Since both callers of the function passed 2 for the parameter, we hereby
remove it and send bands #2 and #3 to stderr explicitly using fprintf.
This has the nice side-effect that these two streams pass through our
ANSI emulation layer on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, the rsync tests were disabled by default, as they needed a
running rsyncd daemon. This was only due to the limitation that our
rsync transport only allowed full URLs of the form
rsync://<host>/<path>
Relaxing the URLs to allow
rsync:<path>
permitted the change in the tests to run whenever rsync is available,
without requiring a fully configured and running rsyncd.
While at it, the tests were fixed so that they run in directories with a
space in their name.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there's no explicitly-named remote, we use the remote specified
for the current branch, which in turn defaults to "origin". But it
this case should require the remote to actually be configured, and not
fall back to the path "origin".
Possibly, the config file's "remote = something" should require the
something to be a configured remote instead of a bare repository URL,
but we actually test with a bare repository URL.
In fetch, we were giving the sensible error message when coming up
with a URL failed, but this wasn't actually reachable, so move that
error up and use it when appropriate.
In push, we need a new error message, because the old one (formerly
unreachable without a lot of help) used the repo name, which was NULL.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The log_config module is needed for at least some versions of apache to
support the LogFormat directive.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Curl is designed not to ask for password when only username is given in
the URL, but has a way for application to feed a (username, password) pair
to it. With this patch, you do not have to keep your password in
plaintext in your $HOME/.netrc file when talking with a password protected
URL with http://<username>@<host>/path/to/repository.git/ syntax.
The code handles only the http-walker side, not the push side. At least,
not yet. But interested parties can add support for it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We honor the command line options, environment variables, variables in
repository configuration file, variables in user's global configuration
file, variables in the system configuration file, and then finally use
built-in default. To implement this semantics, the code should:
- start from built-in default values;
- call git_config() with the configuration parser callback, which
implements "later definition overrides earlier ones" logic
(git_config() reads the system's, user's and then repository's
configuration file in this order);
- override the result from the above with environment variables if set;
- override the result from the above with command line options.
The initialization code http_init() for http transfer got this wrong, and
implemented a "first one wins, ignoring the later ones" in http_options(),
to compensate this mistake, read environment variables before calling
git_config(). This is all wrong.
As a second class citizen, the http codepath hasn't been audited as
closely as other parts of the system, but we should try to bring sanity to
it, before inviting contributors to improve on it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier patch always spelled the full name of the ref that we track
(e.g. "refs/heads/frotz" instead of just "frotz" when we mean the branch
whose name is "frotz"). Worse yet, because we now use the true name of
the ref at the original repository when talk about a tracking branch that
copies from a remote, such a full name alone still does not give enough
information.
This reorganizes the verbose codepath to:
- differentiate "refs/heads/something" and everything else; we say that
the branch tracks "branch <something>" if it begins with "refs/heads/",
and otherwise the branch tracks "ref refs/<someother>/<something>";
- report the name of the remote when we talk about a tracking branch, by
saying "branch frotz from origin";
- not say "by merging" at the end; it is the default and is not worth
reporting.
Signed-off-by: Junio C Hamano <junio@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since ef90d6d (Provide git_config with a callback-data parameter,
2008-05-14), git_config() takes a callback data pointer that can be
used to pass extra parameters to the parsing function. The codepath
to parse configuration variables related to git proxy predates this
facility and used a pair of file scope static variables instead.
This patch removes the need for these global variables by passing the
name of the host we are trying to access as the callback data.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-gui menu item "Repository | Create Desktop Icon" creates a
shortcut (.lnk file) on the Windows desktop. The purpose of the
created shortcut is to make it easy for a user to launch git-gui
for a particular repo in the future.
A Windows user would expect to see git gui launch when they click
the shortcut; they would not expect (nor want) to see a cmd window
open and remain open in the background.
msysGit avoids opening a command window altogether when it's Git GUI
shortcut is used. Ideally, git on cygwin would also have shortcuts
that simply open the GUI, but as a first step, this change allows
the shell window to politely disappear after starting git gui as a
background process.
Signed-off-by: Phil Lawrence <prlawrence@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
For native-protocol pushes (and other protocols as they are converted
to the new method), this moves the refspec match, tracking update, and
report message out of send-pack() and into transport_push(), where it
can be shared completely with other protocols. This also makes fetch
and push more similar in terms of what code is in what file.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The result should be consistent between fetch and push, so we ought to
use the same code in both cases, even though it's short.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As suggested by Junio, disallow the flags PARSE_OPT_KEEP_UNKNOWN and
PARSE_OPT_STOP_AT_NON_OPTION to be turned on at the same time, as a
value of an unknown option could be mistakenly classified as a
non-option, stopping the parser early. E.g.:
git cmd --known --unknown value arg0 arg1
The parser should have stopped at "arg0", but it already stops at
"value".
This patch makes parse_options() die if the two flags are used in
combination.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For repositories laid out like the following:
[svn-remote "svn"]
url = http://foo.com/svn/repos/bar
fetch = myproject/trunk:refs/remotes/trunk
branches = bar/myproject/branches/*:refs/remotes/*
tags = bar/myproject/tags/*:refs/remotes/tags/*
The "bar" component above is considered the intermediate path
and was not handled correctly.
Signed-off-by: Michael Lai <myllai@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
On some systems, regoff_t that is the type of rm_so/rm_eo members are
wider than int; %.*s precision specifier expects an int, so use an explicit
cast.
A breakage reported on Darwin by Brian Gernhardt should be fixed with
this patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comments indicated that setting a Makefile variable USE_NSEC would
enable the code for sub-second [cm]times. However, the Makefile
variable was never turned into a compiler switch so the code was never
enabled. This patch allows USE_NSEC to be noticed by the compiler.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not all OSes use st_ctim and st_mtim in their struct stat. In
particular, it appears that OS X uses st_*timespec instead. So add a
Makefile variable and #define called USE_ST_TIMESPEC to switch the
USE_NSEC defines to use st_*timespec.
This also turns it on by default for OS X (Darwin) machines. Likely
this is a sane default for other BSD kernels as well, but I don't have
any to test that assumption on.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some codepaths do not still use the ST_[CM]TIME_NSEC() pair of macros
introduced by the previous commit but assumes all systems use st_mtim
and st_ctim fields in "struct stat" to record nanosecond resolution part
of the file timestamps.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the hand-rolled parsers that find and remove --remote and --exec
by a parseopt parser that also handles --output.
All three options only have a meaning if no remote server is used or on
the local side. They must be rejected by upload-archive and should not
be sent to the server by archive.
We can't use a single parser for both remote and local side because the
remote end possibly understands a different set of options than the
local side. A local parser would then wrongly accuse options valid on
the other side as being incorrect.
This patch implements a very forgiving parser that understands only the
three options mentioned above. All others are passed to the normal,
complete parser in archive.c (running either locally in archive, or
remotely in upload-archive). This normal parser definition contains
dummy entries for the three options, in order for them to appear in the
help screen.
The parseopt parser allows multiple occurrences of --remote and --exec
unlike the previous one; the one specified last wins. This looseness
is acceptable, I think.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow usagestr to be NULL and don't display any help screen in
this case. This is useful to implement incremental parsers.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a parseopt flag, PARSE_OPT_NO_INTERNAL_HELP, that turns off internal
handling of -h, --help and --help-all. This allows the implementation
of custom help option handlers or incremental parsers.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a parseopt flag, PARSE_OPT_KEEP_UNKNOWN, that can be used to keep
unknown options in argv, similar to the existing KEEP flags.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The latter topic changes the definition of how refspec's src and dst side
is stored in-core; it used to be that the asterisk for pattern was
omitted, but now it is included. The former topic handcrafts an old style
refspec to feed the refspec matching machinery that lacks the asterisk and
triggers an error.
This resolves the semantic clash between the two topics early before they
need to be merged to integration branches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
builtin-revert.c: release index lock when cherry-picking an empty commit
document config --bool-or-int
t1300: use test_must_fail as appropriate
cleanup: add isascii()
Documentation: fix badly indented paragraphs in "--bisect-all" description
In addition, ''quote_ref_url'' inserts a slash between the base URL and
remote ref path only if needed. Previously, this insertion wasn't
contingent on the lack of a separating slash.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These variables were unused and can be removed safely:
builtin-clone.c::cmd_clone(): use_local_hardlinks, use_separate_remote
builtin-fetch-pack.c::find_common(): len
builtin-remote.c::mv(): symref
diff.c::show_stats():show_stats(): total
diffcore-break.c::should_break(): base_size
fast-import.c::validate_raw_date(): date, sign
fsck.c::fsck_tree(): o_sha1, sha1
xdiff-interface.c::parse_num(): read_some
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When launching "diff --no-index" with a parameter "/dev/null", the MSys
bash converts the "/dev/null" to a "nul", which usually makes sense. But
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users have tabs in their names, oddly enough. This
causes problems when loading the usercache from disk,
as split separates the fields on the wrong tabs. When
fast-import's parse_ident() tries to parse the committer
field, it is unhappy about the unbalanced <..> angle brackets.
It is easy enough to convert the tabs to single spaces.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define GIT_TEST_CLONE_2GB=t if you want the test not to be skipped.
The test works by constructing a repository larger than 2gb, and then
cloning it.
The repository is forced larger than 2gb by setting compression and
delta depth to zero, and then adding just enough unique objects of
a given size.
The objects consist of a running decimal number in ASCII, padded by
spaces. Should that break in the future, e.g. when pack v4 becomes
default, there is a commented-out call to test-genrandom which can be
substituted, but that uses more cycles than the current method.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, the lack of USE_NSEC meant "do not record nor use the
nanosecond resolution part of the file timestamps". To avoid problems on
filesystems that lose the ns part when the metadata is flushed to the disk
and then later read back in, disabling USE_NSEC has been a good idea in
general.
If you are on a filesystem without such an issue, it does not hurt to read
and store them in the cached stat data in the index entries even if your
git is compiled without USE_NSEC. The index left with such a version of
git can be read by git compiled with USE_NSEC and it can make use of the
nanosecond part to optimize the check to see if the path on the filesystem
hsa been modified since we last looked at.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch, pull, and push didn't know their options. They do now. merge's
options are factored into a variable so they can be shared between
_git_merge and _git_pull
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to complete --strategy was duplicated between _git_rebase and
_git_merge, and is about to gain a third caller (_git_pull). This patch
factors it into its own function.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sverre Rabbelier noticed a completion issue with push:
$ git push ori<tab>
git push origin
$ git push -f ori<tab>
git push -f origin/
Markus Heidelberg pointed out that the issue extends to fetch and pull.
The reason is that the current code naively assumes that if
COMP_CWORD=2, it should complete a remote name, otherwise it should
complete a refspec. This assumption fails if there are any --options.
This patch fixes that issue by instead scanning COMP_CWORDS to see if
the remote has been completed yet (we now assume the first non-dashed
argument is the remote). The new logic is factored into a function,
shared by fetch, pull, and push.
The new function also properly handles '.' as the remote.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit ce8e880 converted ls-files to use parseopt; the
--no-empty-directory option was converted as an
OPT_BIT for "empty-directory" to set the
DIR_HIDE_EMPTY_DIRECTORY flag. However, that makes it do the
opposite of what it should: --empty-directory would hide,
but --no-empty-directory would turn off hiding.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These ancient tests predate test_cmp.
While we're at it, let's switch to our usual "expected
before actual" order of arguments; this makes the diff
output "here's what is changed from expected" instead of the
reverse.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When overriding the identifier "stat" so that "struct stat" will be
substituted with "struct _stati64" everywhere, I tried to fix the calls
to the _function_ stat(), too, but I forgot to change the earlier
attempt "stat64" to "_stati64" there.
So, the stat() calls were overridden by calls to _stati64() instead.
Unfortunately, there is a function _stati64() so that I missed that
calls to stat() were not actually overridden by calls to mingw_lstat(),
but t4200-rerere.sh showed the error.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a cherry-pick of an empty commit is done, release the lock
held on the index.
The fix is the same as was applied to similar code in 4271666046.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to keep the requirements strict, each * has to be a full path
component, and there may only be one * per side. This requirement is
enforced entirely by check_ref_format(); the matching implementation
will substitute the whatever matches the * in the lhs for the * in the
rhs.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to do anything more capable with refspecs, the first step is
to keep the entire input. Additionally, validate patterns by checking
for the ref matching the rules for a pattern as given by
check_ref_format(). This requires a slight change to
check_ref_format() to make it enforce the requirement that the '*'
immediately follow a '/'.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This puts all of the interpretation of the pattern representation in a
single function for easy manipulation.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of creating a refspec by hand, go through the refspec parsing
code, so that changes in the refspec storage will be accounted for.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the config variable color.grep.external, which can be used to
switch on coloring of external greps. To enable auto coloring with
GNU grep, one needs to set color.grep.external to --color=always to
defeat the pager started by git grep. The value of the config
variable will be passed to the external grep only if it would
colorize internal grep's output, so automatic terminal detected
works. The default is to not pass any option, because the external
grep command could be a program without color support.
Also set the environment variables GREP_COLOR and GREP_COLORS to
pass the configured color for matches to the external grep. This
works with GNU grep; other variables could be added as needed.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Coloring matches makes them easier to spot in the output.
Add two options and two parameters: color.grep (to turn coloring on
or off), color.grep.match (to set the color of matches), --color
and --no-color (to turn coloring on or off, respectively).
The output of external greps is not changed.
This patch is based on earlier ones by Nguyễn Thái Ngọc Duy and
Thiago Alves.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Push pmatch and eflags to the callers of match_one_pattern(), which
allows them to specify regex execution flags and to get the location
of a match.
Since we only use the first element of the matches array and aren't
interested in submatches, no provision is made for callers to
provide a larger array.
eflags are ignored for fixed patterns, but that's OK, since they
only have a meaning in connection with regular expressions
containing ^ or $.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only use of the struct grep_opt argument of match_expr_eval()
is to pass the option word_regexp to match_one_pattern(). By adding
a pattern flag for it we can reduce the number of function arguments
of these two functions, as a cleanup and preparation for adding more
in the next patch.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to returning if an expression matches a line,
match_expr_eval() updates the expression's hit flag if the parameter
collect_hits is set. It never sets collect_hits for children of AND
nodes, though, so their hit flag will never be updated. Because of
that we can return early if the first child didn't match, no matter
if collect_hits is set or not.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation is just a pointer to the --bool and --int
options, but it makes sense to at least mention that it
exists.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The conversion to parse_opt left this as NULL; on glibc
systems, the usage message prints
--bool-or-int (null)
and on other ones, segfaults.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the tests checked the exit code manually, even going
so far as to run git outside of the test_expect harness.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a standard definition of isascii() and use it to replace an open
coded high-bit test in pretty.c. While we're there, write the ESC
char as the more commonly used '\033' instead of as 0x1b to enhance
its grepability.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the following:
- git config value blame.date that expects one of the git log date
formats (e.g. relative,local,default,iso,...);
- git blame command line option --date expects one of the git
log date formats;
- documentation in blame-options.txt;
- git blame uses the appropriate date.c functions and enums to
make sense of the date format and provide appropriate data;
git blame continues to line up the output columns by padding the date
column up to the max width of the chosen date format.
The date format for git blame without both blame.date and --date continues
to be ISO for backwards compatibility.
git annotate ignores the date format specifiers and continues to uses the
ISO format, as before.
Signed-off-by: Eugene Letuchy <eugene@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ns/pretty-format:
bash completion: add --format= and --oneline options for "git log"
Add tests for git log --pretty, --format and --oneline.
Add --oneline that is a synonym to "--pretty=oneline --abbrev-commit"
Give short-hands to --pretty=tformat:%formatstring
Add --format that is a synonym to --pretty
* js/send-email:
send-email: add --confirm option and configuration setting
send-email: don't create temporary compose file until it is needed
send-email: --suppress-cc improvements
send-email: handle multiple Cc addresses when reading mbox message
send-email: allow send-email to run outside a repo
* tp/completion:
Fixup: Add bare repository indicator for __git_ps1
Add bare repository indicator for __git_ps1
completion: More fixes to prevent unbound variable errors
completion: Better __git_ps1 support when not in working directory
completion: Use consistent if [...] convention, not "test"
completion: For consistency, change "git rev-parse" to __gitdir calls
* js/branch-symref:
add basic branch display tests
branch: clean up repeated strlen
Avoid segfault with 'git branch' when the HEAD is detached
builtin-branch: improve output when displaying remote branches
Conflicts:
builtin-branch.c
* js/valgrind:
valgrind: do not require valgrind 3.4.0 or newer
test-lib: avoid assuming that templates/ are in the GIT_EXEC_PATH
Tests: let --valgrind imply --verbose and --tee
Add a script to coalesce the valgrind outputs
t/Makefile: provide a 'valgrind' target
test-lib.sh: optionally output to test-results/$TEST.out, too
Valgrind support: check for more than just programming errors
valgrind: ignore ldso and more libz errors
Add valgrind support in test scripts
The type 'off_t' should be used everywhere so that the bit-depth of that
type can be adjusted in the standard C library, and you just need to
recompile your program to benefit from the extended precision.
Only that it was not done that way in the MS runtime library.
This patch reroutes off_t to off64_t and provides the other necessary
changes so that finally, clones larger than 2 gigabyte work on Windows
(provided you are on a file system that allows files larger than 2gb).
Initial patch by Sickboy <sb@dev-heaven.net>.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Including passing parameters to the programs, and running more
complicated checks without requiring a seperate shell script.
Signed-off-by: John Tapsell <johnflux@gmail.com>
Acked-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain remote commands, when asked to do something in a
particular directory that was not actually a git repository,
would say "unable to chdir or not a git archive". The
"chdir" bit is an unnecessary detail, and the term "git
archive" is much less common these days than "git repository".
So let's switch them all to:
fatal: '%s' does not appear to be a git repository
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
stat_tracking_info() in remote.c is used to collect the statistics to
be able to say (for instance) from the output of "git checkout':
Your branch and 'foo' have diverged,
and have X and Y different commit(s) each, respectively.
Currently X and Y also includes the count of merges. This patch
excludes the merges from being counted.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It looks like someone did 90% of the work, then forgot to actually use
the function in one place.
Also the helper function did not use the correct variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When archiving a repository there is no way to specify a file as output.
This patch adds a new option "--output" that redirects the output to a
file instead of stdout.
Signed-off-by: Carlos Manuel Duclos Vergara <carlos.duclos@nokia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tell the user that a backup (original) already exists, and how to solve
this problem (with -f option)
Signed-off-by: John Tapsell <johnflux@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add a comment that the web interface wraps the lines
Signed-off-by: John Tapsell <johnflux@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A lot of people see this message for the first time on the gitweb
interface, where there is no clue as to what 'this file' means.
Signed-off-by: John Tapsell <johnflux@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch teaches "git rev-list --bisect-vars" to output an estimate
of the number of bisection step left _after the current one_ along with
the other variables it already outputs.
This patch also makes "git-bisect.sh" display this number of steps left
_after the current one_, along with the estimate of the number of
revisions left to test (after the current one).
Here is a table to help analyse what should be the best estimate for
the number of bisect steps left.
N : linear case --> probabilities --> best
-------------------------------------------------------------
1 : G-B --> 0 --> 0
2 : G-U1-B --> 0 --> 0
3 : G-U1-U2-B --> 0(1/3) 1(2/3) --> 1
4 : G-U1-U2-U3-B --> 1 --> 1
5 : G-U1-U2-U3-U4-B --> 1(3/5) 2(2/5) --> 1
6 : G-U1-U2-U3-U4-U5-B --> 1(2/6) 2(4/6) --> 2
7 : G-U1-U2-U3-U4-U5-U6-B --> 1(1/7) 2(6/7) --> 2
8 : G-U1-U2-U3-U4-U5-U6-U7-B --> 2 --> 2
9 : G-U1-U2-U3-U4-U5-U6-U7-U8-B --> 2(7/9) 3(2/9) --> 2
10: G-U1-U2-U3-U4-U5-U6-U7-U8-U9-B --> 2(6/10)3(4/10)--> 2
In the column "N", there is the number of revisions that could _now_
be the first bad commit we are looking for.
The "linear case" column describes the linear history corresponding to
the number in column N. G means good, B means bad, and Ux means
unknown. Note that the first bad revision we are looking for can be
any Ux or B.
In the "probabilities" column, there are the different outcomes in
number of steps with the odds of each outcome in parenthesis
corresponding to the linear case.
The "best" column gives the most accurate estimate among the different
outcomes in the "probabilities" column.
We have the following:
best(2^n) == n - 1
and for any x between 0 included and 2^n excluded, the probability for
n - 1 steps left looks like:
P(2^n + x) == (2^n - x) / (2^n + x)
and P(2^n + x) < 0.5 means 2^n < 3x
So the algorithm used in this patch calculates 2^n and x, and then
choose between returning n - 1 and n.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code that calls diff_setup(), including via init_revisions(), should later call
diff_setup_done(), possibly via setup_revisions(). Failure to do so could cause
errors, especially in the future when we add responsibilities to
diff_setup_done(). This instance causes no known errors with the present code.
But it resulted in an error with an experimental patch.
Signed-off-by: Keith Cascio <keith@cs.ucla.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-clone creates an initial branch it was not checking the
branch.autosetuprebase configuration option (which may exist in
~/.gitconfig). Refactor the code used by "git branch" to create
a new branch, and use it instead of the insufficiently duplicated code
in builtin-clone.
Changes are partly, and the test is mostly, based on the previous work by
Pat Notz.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make 'git submodule add' normalize the submodule path in the
same way as 'git ls-files' does, so that 'git submodule init' looks up
the information in .gitmodules with the same key under which 'git
submodule add' stores it.
This fixes 4 known breakages.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add simple test cases for adding and initialising submodules. The
init step is necessary in order to verify the added information.
The second test exposes a known breakage due to './' in the path: git
ls-files simplifies the path but git add does not, which leads to git
init looking for different lines in .gitmodules than git add adds.
The other tests add test cases for '//' and '..' in the path which
currently fail for the same reason.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These may not be obvious to non-native English speakers
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When picking commits whose parents have not changed, we do not need to
rewrite the commit. We do not need to reset the working directory to
the parent's state, either.
Requested by Sverre Rabbelier.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mental model for clone is that the branch is "checked
out" (and it even says this in Documentation/git-clone.txt:
"...creates and checks out an initial branch"). Therefore it
is reasonable for users to expect that any post-checkout
hook would be run.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email violates the principle of least surprise by automatically
cc'ing additional recipients without confirming this with the user.
This patch teaches send-email a --confirm option. It takes the
following values:
--confirm=always always confirm before sending
--confirm=never never confirm before sending
--confirm=cc confirm before sending when send-email has
automatically added addresses from the patch to
the Cc list
--confirm=compose confirm before sending the first message when
using --compose. (Needed to maintain backwards
compatibility with existing behavior.)
--confirm=auto 'cc' + 'compose'
If sendemail.confirm is unconfigured, the option defaults to 'compose'
if any suppress-Cc related options have been used, otherwise it defaults
to 'auto'.
Unfortunately, it is impossible to introduce this patch such that it
helps new users without potentially annoying some existing users. We
attempt to mitigate the latter by:
* Allowing the user to set 'git config sendemail.confirm never'
* Allowing the user to say 'all' after the first prompt to not be
prompted on remaining emails during the same invocation.
* Telling the user about the 'sendemail.confirm' setting if it is
unconfigured whenever we prompt due to Cc before sending.
* Only prompting if no --suppress related options have been passed, as
using such an option is likely to indicate an experienced send-email
user.
There is a slight fib in message informing the user of the
sendemail.confirm setting and this is intentional. Setting 'auto'
differs from leaving sendemail.confirm unset in two ways: 1) 'auto'
obviously squelches the informational message; 2) 'auto' prompts when
the Cc list has been expanded even in the presence of a --suppress
related option, where leaving sendemail.confirm unset does not. This is
intentional to keep the message simple, and to avoid adding another
sendemail.confirm value ('auto-except-suppress'?).
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Forwards the --stat, --no-stat, and --summary options on to git-rebase.
Signed-off-by: Tor Arne Vestbø <torarnv@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behavior of --verbose is unchanged, but uses a different state
variable internally, so that the meaning of verbose output may be
expanded without affecting the diffstat. This is also reflected in
the documentation.
The configuration option rebase.stat works the same was as merg.stat,
but the default is currently false.
Signed-off-by: Tor Arne Vestbø <torarnv@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-send-email supports the --in-reply-to option even with
--no-thread. However, the code that adds the relevant mail headers
was guarded by a test for --thread.
Remove the test, so that the user's choice is respected.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When memmem() was imported from glibc 2.2 into compat/, an optimization
was dropped in the process, in order to make the code smaller and simpler.
It was OK because memmem() wasn't used in performance-critical code. Now
the situation has changed and we can benefit from this optimization.
The trick is to avoid calling memcmp() if the first character of the needle
already doesn't match. Checking one character directly is much cheaper
than the function call overhead. We keep the first character of the needle
in the variable named point and the rest in the one named tail.
The following commands were run in a Linux kernel repository and timed, the
best of five results is shown:
$ STRING='Ensure that the real time constraints are schedulable.'
$ git log -S"$STRING" HEAD -- kernel/sched.c >/dev/null
On Windows Vista x64, before:
real 0m8.470s
user 0m0.000s
sys 0m0.000s
And after the patch:
real 0m1.887s
user 0m0.000s
sys 0m0.000s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use memmem() instead of open-coding it. The system libraries usually have a
much faster version than the memcmp()-loop here. Even our own fall-back in
compat/, which is used on Windows, is slightly faster.
The following commands were run in a Linux kernel repository and timed, the
best of five results is shown:
$ STRING='Ensure that the real time constraints are schedulable.'
$ git log -S"$STRING" HEAD -- kernel/sched.c >/dev/null
On Ubuntu 8.10 x64, before (v1.6.2-rc2):
8.09user 0.04system 0:08.14elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+30952minor)pagefaults 0swaps
And with the patch:
1.50user 0.04system 0:01.54elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+30645minor)pagefaults 0swaps
On Fedora 10 x64, before:
8.34user 0.05system 0:08.39elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+29268minor)pagefaults 0swaps
And with the patch:
1.15user 0.05system 0:01.20elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+32253minor)pagefaults 0swaps
On Windows Vista x64, before:
real 0m9.204s
user 0m0.000s
sys 0m0.000s
And with the patch:
real 0m8.470s
user 0m0.000s
sys 0m0.000s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final hunk in this patch corrects what appears to be a typo:
of --> or
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Short story: There is a section in t3400 that tests fundamental rebase
properties. 3ec7371f (Add two extra tests for git rebase, 2009-02-09)
added a check that rebase works on a detached HEAD, but the test was put
near the end of the file. This moves it to a more suitable place.
Long story: The test that preceded the one in question tests that a
rebased commit degrades from a content change with mode change to a
mere mode change. But on Windows, where we have core.filemode=false,
the original commit did not record the mode change, and so the rebase
operation did not rebase anything. This caused the subsequent detached
HEAD test to fail.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes an issue reported by Johannes Sixt on the git mailing list:
> This recipe sends gitk into an endless loop. In git.git do:
>
> cd t
> # remove chmod a+x A near the end of the file
> sed -i 's/chmod/: chmod/' t3400-rebase.sh
> sh t3400-rebase.sh --debug
> cd trash\ directory.t3400-rebase/
> gitk master modechange modechange@{1}
>
>
> I briefly see the history chart, but the dot that should be modechange@{1}
> is missing. One automatically selected commit is shown in the diff section
> below. But then the commit list is cleared and gitk goes into an infinite
> loop.
>
> Things work alright if either modechange@{1} is dropped, or the 'chmod'
> line is left unchanged, which is a bit strange.
>
> This is with git version 1.6.1.2.390.gba743
There were actually two problems. This recipe created a situation where
git log would output a child commit after its parent. This meant that
we called fix_reversal which called splitvarc, which should call modify_arc
to note the fact that it has modified the arc that it has just split. It
wasn't, which meant that displayorder and other variables got into an
inconsistent state (a commit appearing twice in displayorder).
This then meant that the targetrow/targetid logic in drawvisible thought
it need to redraw each time. That, together with the fact that drawvisible
called drawcommits which called drawvisible if a redraw was needed, led
to the infinite loop.
In fact drawvisible is now the only caller of drawcommits. Thus, the
start and end row arguments to drawcommits always encompass the whole
visible area, so drawcommits doesn't need to call drawvisible to redraw;
it just needs to clear the screen and draw what it's been asked to.
This fixes these two problems by adding a call to modify_arc in
splitvarc and by taking out the call to drawvisible in drawcommits.
It also removes an unrelated left-over debugging puts in external_blame.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Call setup_git_directory() before git_config() to make sure git_dir is set
to the proper value.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parameters accepted by the --whitespace option of "git apply" have
changed over time, and the documentation for "git rebase" was out of
sync. Remove the specific parameter list from the "git rebase"
documentation and simply point to the "git apply" documentation for
details, as is already done in the "git am" documentation.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now is_kept_pack() is just a member lookup into a structure, we can write
it as such.
Also rewrite the sole caller of has_sha1_kept_pack() to switch on the
criteria the callee uses (namely, revs->kept_pack_only) between calling
has_sha1_kept_pack() and has_sha1_pack(), so that these two callees do not
have to take a pointer to struct rev_info as an argument.
This removes the header file dependency issue temporarily introduced by
the earlier commit, so we revert changes associated to that as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes --unpacked=<packfile> parameter from the revision parser, and
rewrites its use in git-repack to pass a single --kept-pack-only option
instead.
The new --kept-pack-only option means just that. When this option is
given, is_kept_pack() that used to say "not on the --unpacked=<packfile>
list" now says "the packfile has corresponding .keep file".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactors three loops that check if a given packfile is on the
ignore_packed list into a function is_kept_pack(). The function returns
false for a pack on the list, and true for a pack not on the list, because
this list is solely used by "git repack" to pass list of packfiles that do
not have corresponding .keep files, i.e. a packfile not on the list is
"kept".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Its "ignore_packed" parameter always comes from struct rev_info. This
patch makes the function take a pointer to the surrounding structure, so
that the refactoring in the next patch becomes easier to review.
There is an unfortunate header file dependency and the easiest workaround
is to temporarily move the function declaration from cache.h to
revision.h; this will be moved back to cache.h once the function loses
this "ignore_packed" parameter altogether in the later part of the
series.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the callers of this function except only one pass NULL to its last
parameter, ignore_packed.
Introduce has_sha1_kept_pack() function that has the function signature
and the semantics of this function, and convert the sole caller that does
not pass NULL to call this new function.
All other callers and has_sha1_pack() lose the ignore_packed parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script used $args and $existing without initializing it to empty. It
would have been confused by an environment variable the end user had
before running it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When %z was removed from the strftime call and subsituted with a
local gmt offset calculation, time() was no longer the default for
all time functions as it was with the previous localtime(shift).
This is now corrected so that format_svn_time behaves as it used to.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though this will break things for some extremely rare repositories
used by broken Windows clients, it's probably not worth enabling this by
default as it has negatively affected many more users than it has helped
from what we've seen so far.
The extremely rare repositories that have broken symlinks in them will be
silently corrupted in import; but users can still reenable this option and
restart the import.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing output of "git remote show <remote>" with respect to push
ref specs is basically just to show the raw refspec. This patch teaches
the command to interpret the refspecs and show how each branch will be
pushed to the destination. The output gives the user an idea of what
"git push" should do if it is run w/o any arguments.
Example new output:
1a. Typical output with no push refspec (i.e. matching branches only)
$ git remote show origin
* remote origin
[...]
Local refs configured for 'git push':
master pushes to master (up to date)
next pushes to next (local out of date)
1b. Same as above, w/o querying the remote:
$ git remote show origin -n
* remote origin
[...]
Local ref configured for 'git push' (status not queried):
(matching) pushes to (matching)
2a. With a forcing refspec (+), and a new topic
(something like push = refs/heads/*:refs/heads/*):
$ git remote show origin
* remote origin
[...]
Local refs configured for 'git push':
master pushes to master (fast forwardable)
new-topic pushes to new-topic (create)
next pushes to next (local out of date)
pu forces to pu (up to date)
2b. Same as above, w/o querying the remote
$ git remote show origin -n
* remote origin
[...]
Local refs configured for 'git push' (status not queried):
master pushes to master
new-topic pushes to new-topic
next pushes to next
pu forces to pu
3. With a remote configured as a mirror:
* remote backup
[...]
Local refs will be mirrored by 'git push'
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing output of "git remote show <remote>" is too verbose for the
information it provides. This patch teaches it to provide more
information in less space.
The output for push refspecs is addressed in the next patch.
Before the patch:
$ git remote show origin
* remote origin
URL: git://git.kernel.org/pub/scm/git/git.git
HEAD branch: master
Remote branch merged with 'git pull' while on branch master
master
Remote branch merged with 'git pull' while on branch next
next
Remote branches merged with 'git pull' while on branch octopus
foo bar baz frotz
New remote branch (next fetch will store in remotes/origin)
html
Stale tracking branch (use 'git remote prune')
bogus
Tracked remote branches
maint
man
master
next
pu
todo
After this patch:
$ git remote show origin
* remote origin
URL: git://git.kernel.org/pub/scm/git/git.git
HEAD branch: master
Remote branches:
bogus stale (use 'git remote prune' to remove)
html new (next fetch will store in remotes/origin)
maint tracked
man tracked
master tracked
next tracked
pu tracked
todo tracked
Local branches configured for 'git pull':
master rebases onto remote master
next rebases onto remote next
octopus merges with remote foo
and with remote bar
and with remote baz
and with remote frotz
$ git remote show origin -n
* remote origin
URL: git://git.kernel.org/pub/scm/git/git.git
HEAD branch: (not queried)
Remote branches: (status not queried)
bogus
maint
man
master
next
pu
todo
Local branches configured for 'git pull':
master rebases onto remote master
next rebases onto remote next
octopus merges with remote foo
and with remote bar
and with remote baz
and with remote frotz
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our usual method for determining the ref pointed to by HEAD
is to compare HEAD's sha1 to the sha1 of all refs, trying to
find a unique match.
However, some transports actually get to look at HEAD
directly; we should make use of that information when it is
available. Currently, only http remotes support this
feature.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide a porcelain command for setting and deleting
$GIT_DIR/remotes/<remote>/HEAD.
While we're at it, document what $GIT_DIR/remotes/<remote>/HEAD is all
about.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in preparation for teaching remote how to set
refs/remotes/<remote>/HEAD to match what HEAD is set to at <remote>, but
is useful in its own right.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remote and stale branches are emitted in alphabetical order, but new and
tracked branches are not. So sort the latter to be consistent with the
former. This also lets us use more efficient string_list_has_string()
instead of unsorted_string_list_has_string().
"show <remote>" prunes symrefs, but "show <remote> -n" does not. Fix the
latter to match the former.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When not querying the remote, show() was having to populate
states.tracked itself. It makes more sense for get_remote_ref_states()
to do this consistently. Since show() is the only caller of
get_remote_ref_states() with query=0, this change does not affect
other callers.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- The variable name "remote" is used as both a "char *" and as a "struct
remote *"; this is confusing, so rename the former to remote_name.
- Consistently refer to the refs returned by transport_get_remote_refs()
as remote_refs.
- There is no need to call "sort_string_list(&branch_list)" as
branch_list is populated via string_list_insert(), which maintains its
order.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_ref_states() populates the util pointer of the string_list_item's
that it adds to states->new and states->tracked, but nothing ever uses
the pointer, so we can get rid of the extra code.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch moves identical lines of code into a cleanup function. The
function has two callers and is about to gain a third.
Also removed a bogus NEEDSWORK comment per Daniel Barkalow:
Actually, the comment is wrong; "remote" comes from remote_get(),
which returns things from a cache in remote.c; there could be a
remote_put() to let the code know that the caller is done with the
object, but it wouldn't presently do anything.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a convenience function for iterating over a string_list's items via
a callback.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
match_refs() returns non-zero if there is an error in
match_explicit_refs(), without handling any remaining pattern ref specs.
Its existing callers exit upon receiving non-zero, so a partial result
is of no consequence to them; however a new caller, builtin-remote, is
interested in the complete result even if there are errors in
match_explicit_refs().
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some instances, match_refs() sets the peer_ref field of refs in the
dst list such that it points to a ref in the src list. This prevents
callers from freeing both the src and dst lists, as doing so would cause
a double-free since free_refs() frees the peer_ref.
As well, the following configuration causes two refs in the dst list to
have the same peer_ref, which can also lead to a double-free:
push = refs/heads/master:refs/heads/backup
push = refs/heads/master:refs/heads/master
Existing callers of match_heads() call it only once and then terminate,
w/o ever bothering to free the src or dst lists, so this is not
currently a problem.
This patch modifies match_refs() to first copy any refs it plucks from
the src list before assigning them as a peer_ref. This allows
builtin-remote, a future caller, to free the src and dst lists.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Determining HEAD is ambiguous since it is done by comparing SHA1s.
In the case of multiple matches we return refs/heads/master if it
matches, else we return the first match we encounter. builtin-remote
needs all matches returned to it, so add a flag for it to request such.
To be simple and consistent, the return value is now a copy (including
peer_ref) of the matching refs.
Originally contributed by Jeff King along with the prior commit as a
single patch.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To ensure that copied refs can always be freed w/o causing a
double-free, make copy_ref() perform a deep copy.
Also have copy_ref() return NULL if asked to copy NULL to simplify
things for the caller.
Background: currently copy_ref() performs a shallow copy. This is fine
for current callers who never free the result and/or only copy refs
which contain NULL pointers. But copy_ref() is about to gain a new
caller (guess_remote_head()) which copies refs where peer_ref is not
NULL and the caller of guess_remote_head() will want to free the result.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is nothing to be skipped, the output from
rev-list --bisect-vars was eval'ed without first being
strung together with &&; this is probably not a problem
as it is much less likely to be a bad input than the list
handcrafted by the filter_skip function, but it still is
a good discipline.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "bad" commit was also "skip"ped and when more than one
commit was skipped, the "filter_skipped" function would have
printed something like:
bisect_rev=<hash1>|<hash2>
(where <hash1> and <hash2> are hexadecimal sha1 hashes)
and this would have been evaled later as piping "bisect_rev=<hash1>"
into "<hash2>", which would have failed.
So this patch makes the "filter_skipped" function properly quote
what it outputs, so that it will print something like:
bisect_rev='<hash1>|<hash2>'
which will be properly evaled later. The caller was not stopping
properly because the scriptlet this function returned to be evaled
was not strung together with && and because of this, an error in
an earlier part of the output was simply ignored.
A test case is added to the test suite.
And while at it, we also initialize the VARS, FOUND and TRIED
variables, so that we protect ourselves from environment variables
the user may have with these names.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you are in the middle of "git rebase", "git am --abort" by mistake
would have referred to nonexistent ORIG_HEAD and barfed, or worse yet, used
a stale ORIG_HEAD and taken you to an unexpected commit.
Also the option parsing did not reject "git am --abort --skip".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git am --abort resets the index unconditionally. But in case a previous
git am exited due to a dirty index it is preferable to keep that index.
Make it so.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OS X's GNU grep does not support -P/--perl-regexp.
We use a basic RE instead, and simplify the pattern slightly by
replacing '+' with '*' so it can be more easily expressed using a basic
RE. The important part of pattern, checking for a SHA-1 has suffix in
the successful PUT/MOVE operations, remains the same. Also, a-z instead
of a-f was an obvious mistake in the original RE. Here are samples of
what we want to match:
127.0.0.1 - - [26/Feb/2009:22:38:13 +0000] "PUT /test_repo.git/objects/3e/a4fbb9e18a401a6463c595d08118fcb9fb7426_fab55116904c665a95438bcc78521444a7db6096 HTTP/1.1" 201 277
127.0.0.1 - - [26/Feb/2009:22:38:13 +0000] "MOVE /test_repo.git/objects/3e/a4fbb9e18a401a6463c595d08118fcb9fb7426_fab55116904c665a95438bcc78521444a7db6096 HTTP/1.1" 201 277
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The AIX mkstemp() modifies its template parameter to an empty string if
the call fails. The existing code had already recomputed the template,
but too late to be good.
See also 6ff6af62, which fixed this problem in a different spot.
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function had complications which made it hard to extend.
- It used to do two things: find the HEAD ref, and then find a
matching ref, optionally returning the former via assignment to a
passed-in pointer. Since finding HEAD is a one-liner, just have a
caller do it themselves and pass it as an argument.
- It used to manually search through the ref list for
refs/heads/master; this can be a one-line call to
find_ref_by_name.
Originally contributed by Jeff King along with the next commit as a
single patch.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move locate_head() to remote.c and rename it to guess_remote_head() to
more accurately reflect what it does. This is in preparation for being
able to call it from builtin-remote.c
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ref_newer() appears to have been copied from builtin-send-pack.c to
http-push.c via cut and paste. This patch moves the function and its
helper unmark_and_free() to remote.c. There was a slight difference
between the two implementations, one used TMP_MARK for the mark, the
other used 1. Per Jeff King, I went with TMP_MARK as more correct.
This is in preparation for being able to call it from builtin-remote.c
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_local_heads() appears to have been copied from builtin-send-pack.c
to http-push.c via cut and paste. This patch moves the function and its
helper one_local_ref() to remote.c.
The two copies of one_local_ref() were not identical. I used the more
recent version from builtin-send-pack.c after confirming with Jeff King
that it was an oversight that commit 30affa1e did not update both
copies.
This is in preparation for being able to call it from builtin-remote.c
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since it doesn't actually touch its argument, this makes
sense.
However, we still want to return a non-const version (which
requires a cast) so that this:
struct ref *a, *b;
a = find_ref_by_name(b);
works. Unfortunately, you can also silently strip the const
from a variable:
struct ref *a;
const struct ref *b;
a = find_ref_by_name(b);
This is a classic C const problem because there is no way to
say "return the type with the same constness that was passed
to us"; we provide the same semantics as standard library
functions like strchr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was mostly being tested implicitly by the "http push"
tests. But making a separate test script means that:
- we will run fetch tests even when http pushing support
is not built
- when there are failures on fetching, they are easier to
see and isolate, as they are not in the middle of push
tests
This script defaults to running the webserver on port 5550,
and puts the original t5540 on port 5540, so that the two
can be run simultaneously without conflict (but both still
respect an externally set LIB_HTTPD_PORT).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are some redirects and some error checking that need
to be done by the caller; let's move both into the
start_httpd function so that all callers don't have to
repeat them (there is only one caller now, but another will
follow in this series).
This doesn't violate any assumptions that aren't already
being made by lib-httpd, which is happy to say "skipping"
and call test_done for a number of other cases.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, for dates older than 12 months we fell back to just giving the
absolute time. This can be a bit jarring when reading a list of times.
Instead, let's switch to "Y years, M months" for five years, and then just
"Y years" after that.
No particular reason on the 5 year cutoff except that it seemed reasonable
to me.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More specifically; --pretty=format, tformat and new %foo shortcut.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two are often used together but are too long to type.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow --pretty="%h %s" (and --format="%h %s") as shorthand for an often
used option --pretty=tformat:"%h %s".
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people prefer to call the pretty-print styles "format", and get
annoyed to see "git log --format=short" fail. Introduce it as a synonym
to --pretty so that both can be used.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit eed6ca7 caused a minor regression when it switched to using
tempfile() to generate the temporary compose file. Since tempfile()
creates the file at the time it generates the filename, zero-length
temporary files are being left behind unless --compose is used (in which
case the file is cleaned up).
This patch fixes the regression by not calling tempfile() to generate
the compose filename unless --compose is in use.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
6 out of 11 of these tests fail.
The test CVS repository used for these tests is derived from one in
cvs2svn's test suite.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CVS's handling of vendor branches is tricky; add some tests to check
whether revisions added via "cvs imports" then imported to git via
"git cvsimport" are reflected correctly on master.
One of these tests fail and is therefore marked "test_expect_failure".
Cvsimport doesn't realize that subsequent changes on a vendor branch
affect master as long as the vendor branch is the default branch.
The test CVS repository used for these tests is derived from cvs2svn's
test suite.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A user's ~/.cvsrc file can change the basic behavior of CVS commands.
Therefore we should ignore it in order to ensure consistent results
from the test suite.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For now the library just includes code (moved from t/t9600-cvsimport.sh)
that checks whether the prerequisites for "git cvsimport" are installed.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this timestamp is used to check for racy-clean files, it is
important to keep it uptodate.
For the 'git checkout' command without the '-q' option, this make a
huge difference. Before, each and every file which was updated, was
racy-clean after the call to unpack_trees() and write_index() but
before the GIT process ended.
And because of the call to show_local_changes() in builtin-checkout.c,
we ended up reading those files back into memory, doing a SHA1 to
check if the files was really different from the index. And, of
course, no file was different.
With this fix, 'git checkout' without the '-q' option should now be
almost as fast as with the '-q' option, but not quite, as we still do
some few lstat(2) calls more without the '-q' option.
Below is some average numbers for 10 checkout's to v2.6.27 and 10 to
v2.6.25 of the Linux kernel, to show the difference:
before (git version 1.6.2.rc1.256.g58a87):
7.860 user 2.427 sys 19.465 real 52.8% CPU faults: 0 major 95331 minor
after:
6.184 user 2.160 sys 17.619 real 47.4% CPU faults: 0 major 38994 minor
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prefixes the branch name with "BARE:" if you're in a
bare repository.
Signed-off-by: Marius Storm-Olsen <git@storm-olsen.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Doing so would be incoherent since --get-color would pick a color slot
and ignore the variable type option (e.g. --bool), and the type would
require a variable name.
Suggested by Junio C Hamano.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only --bool, --int, or --bool-or-int can be used, but not any
combination of them.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Either --global, --system, or --file can be used, but not any
combination.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch has benefited from comments by Johannes
Schindelin and Junio C Hamano.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for parseopt.
Also remove some unecessary comments since the usage is described in the
documentation.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Essentially this replaces 'file' with 'prefix' in the cases where the
variable is used as a prefix, which is consistent with other git
commands.
When using the --list option general errors where not properly reported,
only errors related with the 'file'. Now they are reported, and 'file'
is irrelevant.
That reduces the rest of 'file' usage to nothing, therefore now only
'prefix' remains.
Suggested by Johannes Schindelin.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently git_config() returns an error if there is no repo config file
available (cwd is not a git repo); it will correctly parse the system
and global config files, but still return an error.
It doesn't affect anything else since almost nobody is checking for the
return code (with the exception of 'git remote update').
A reorganization in 'git config' would benefit from being able to
properly detect errors in git_config() without the noise generated when
cwd is not a git repo.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For deep threading mode, i.e., the mode that gives a thread structured
like
+ [PATCH 0/n] Cover letter
`-+ [PATCH 1/n] First patch
`-+ [PATCH 2/n] Second patch
`-+ ...
we currently have to use 'git send-email --thread' (the default). On
the other hand, format-patch also has a --thread option which gives
shallow mode, i.e.,
+ [PATCH 0/n] Cover letter
|-+ [PATCH 1/n] First patch
|-+ [PATCH 2/n] Second patch
...
To reduce the confusion resulting from having two indentically named
features in different tools giving different results, let format-patch
take an optional argument '--thread=deep' that gives the same output
as 'send-mail --thread'. With no argument, or 'shallow', behave as
before. Also add a configuration variable format.thread with the same
semantics.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, format-patch --thread --cover-letter --in-reply-to $parent
makes all mails, including the cover letter, a reply to $parent.
However, we would want the reader to consider the cover letter above
all the patches.
This changes the semantics so that only the cover letter is a reply to
$parent, while all the patches are formatted as replies to the cover
letter.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, format-patch can only track a single reference (the
In-Reply-To:) for each mail. To ensure proper threading, we should
list all known references for every mail.
Change the rev_info.ref_message_id field to a string_list, so that we
can append references at will, and change the output formatting
routines to print all of them in the References: header. The last
entry in the list is implicitly assumed to be the In-Reply-To:, which
gives output consistent with RFC 2822:
The "References:" field will contain the contents of the parent's
"References:" field (if any) followed by the contents of the
parent's "Message-ID:" field (if any).
Note that this is just preparatory work; nothing uses it yet, so all
"References:" fields in the output are still only one deep.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far, git-patch-id was untested. Add some simple checks for output
format and patch (in)equality.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-fsck, of all tools, has very few tests. This adds some more:
* a corrupted object;
* a branch pointing to a non-commit;
* a tag pointing to a nonexistent object;
* and a tag pointing to an object of a type other than what the tag
itself claims.
Only the first two are caught. At least the third probably should,
too, but currently slips through.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far there were no tests checking that log --graph actually works.
Note that the tests strip trailing whitespace, as the current --graph
emits trailing whitespace on lines that do not contain anything but
graph lines.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is only a very rudimentary test, but it was untested before.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With gcc's --coverage option, we can perform automatic coverage data
collection for the test suite.
Add a new Makefile target 'coverage' that scraps all previous coverage
results, recompiles git with the required compiler/linker flags (in
addition to any flags you specify manually), then runs the test suite
and compiles a report.
The compilation must be done with all optimizations disabled, since
inlined functions (and for line-by-line coverage, also optimized
branches/loops) break coverage tracking.
The tests are run serially (with -j1). The coverage code should
theoretically allow concurrent access to its data files, but the
author saw random test failures. Obviously this could be improved.
The report currently consists of a list of functions that were never
executed during the tests, which is written to
'coverage-untested-functions'. Once this list becomes reasonably
short, we would also want to look at branches that were never taken.
Currently only toplevel *.c files are considered. It would be nice to
at least include xdiff, but --coverage did not save data to
subdirectories on the system used to write this (gcc 4.3.2).
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t4014 tests format-patch --thread since 7d812145, but the tests were
ineffective right from the start at least for bash and dash. The
loops of the form
for ...; do something || break; done
introduced by 7d812145 and 5d02294 always exit with status 0, even if
'something' failed, because 'break' returns 0 unless there was no loop
to break.
We take a rather different approach that uses an admittedly heinous
inline Perl script to mangle all interesting information into a format
that is invariant between runs. We can then test the full patch
sequence in one go (with --stdout), doing away with the loop problem.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we inside verify_uptodate() can already tell from the ce entry that
it is already uptodate by testing it with ce_uptodate(ce), there is no
need to call lstat(2) and ie_match_stat() afterwards.
And, reading from the commit log message from:
commit eadb583134
Author: Junio C Hamano <gitster@pobox.com>
Date: Fri Jan 18 23:45:24 2008 -0800
Avoid running lstat(2) on the same cache entry.
this also seems to be correct usage of the ce_uptodate() macro
introduced by that patch.
This will avoid lots of lstat(2) calls in some cases, for example
by running the 'git checkout' command.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the filesystem ext4 is now defined as stable in Linux v2.6.28,
and ext4 supports nanonsecond resolution timestamps natively, it is
time to make USE_NSEC work as expected.
This will make racy git situations less likely to happen. For 'git
checkout' this means it will be less likely that we have to open, read
the contents of the file into RAM, and check if file is really
modified or not. The result sould be a litle less used CPU time, less
pagefaults and a litle faster program, at least for 'git checkout'.
Since the number of possible racy git situations would increase when
disks gets faster, this patch would be more and more helpfull as times
go by. For a fast Solid State Disk, this patch should be helpfull.
Note that, when file operations starts to take less than 1 nanosecond,
one would again start to get more racy git situations.
For more info on racy git, see Documentation/technical/racy-git.txt
For more info on ext4, see http://kernelnewbies.org/Ext4
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'struct cache' does not have a 'usec' member, but a 'unsigned int
nsec' member. Simmilar 'struct stat' does not have a 'st_mtim.usec'
member, and we should instead use 'st_mtim.tv_nsec'.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We were not testing the output of "git branch" anywhere.
Not only does this not protect us against regressions in the
output, but we are not exercising code paths which may have
bugs (such as the one fixed by 45e2b61).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 45e2b61 fixed the initialization of a "len" struct
parameter via strlen. We can use that to clean up what is
now 3 strlens in a 6-line sequence.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Below is oprofile output from GIT command 'git chekcout -q my-v2.6.25'
(move from tag v2.6.27 to tag v2.6.25 of the Linux kernel):
CPU: Core 2, speed 1999.95 MHz (estimated)
Counted CPU_CLK_UNHALTED events (Clock cycles when not halted) with a unit
mask of 0x00 (Unhalted core cycles) count 20000
Counted INST_RETIRED_ANY_P events (number of instructions retired) with a
unit mask of 0x00 (No unit mask) count 20000
CPU_CLK_UNHALT...|INST_RETIRED:2...|
samples| %| samples| %|
------------------------------------
409247 100.000 342878 100.000 git
CPU_CLK_UNHALT...|INST_RETIRED:2...|
samples| %| samples| %|
------------------------------------
260476 63.6476 257843 75.1996 libz.so.1.2.3
100876 24.6492 64378 18.7758 kernel-2.6.28.4_2.vmlinux
30850 7.5382 7874 2.2964 libc-2.9.so
14775 3.6103 8390 2.4469 git
2020 0.4936 4325 1.2614 libcrypto.so.0.9.8
191 0.0467 32 0.0093 libpthread-2.9.so
58 0.0142 36 0.0105 ld-2.9.so
1 2.4e-04 0 0 libldap-2.3.so.0.2.31
Detail list of the top 20 function entries (libz counted in one blob):
CPU_CLK_UNHALTED INST_RETIRED_ANY_P
samples % samples % image name symbol name
260476 63.6862 257843 75.2725 libz.so.1.2.3 /lib/libz.so.1.2.3
16587 4.0555 3636 1.0615 libc-2.9.so memcpy
7710 1.8851 277 0.0809 libc-2.9.so memmove
3679 0.8995 1108 0.3235 kernel-2.6.28.4_2.vmlinux d_validate
3546 0.8670 2607 0.7611 kernel-2.6.28.4_2.vmlinux __getblk
3174 0.7760 1813 0.5293 libc-2.9.so _int_malloc
2396 0.5858 3681 1.0746 kernel-2.6.28.4_2.vmlinux copy_to_user
2270 0.5550 2528 0.7380 kernel-2.6.28.4_2.vmlinux __link_path_walk
2205 0.5391 1797 0.5246 kernel-2.6.28.4_2.vmlinux ext4_mark_iloc_dirty
2103 0.5142 1203 0.3512 kernel-2.6.28.4_2.vmlinux find_first_zero_bit
2077 0.5078 997 0.2911 kernel-2.6.28.4_2.vmlinux do_get_write_access
2070 0.5061 514 0.1501 git cache_name_compare
2043 0.4995 1501 0.4382 kernel-2.6.28.4_2.vmlinux rcu_irq_exit
2022 0.4944 1732 0.5056 kernel-2.6.28.4_2.vmlinux __ext4_get_inode_loc
2020 0.4939 4325 1.2626 libcrypto.so.0.9.8 /usr/lib/libcrypto.so.0.9.8
1965 0.4804 1384 0.4040 git patch_delta
1708 0.4176 984 0.2873 kernel-2.6.28.4_2.vmlinux rcu_sched_grace_period
1682 0.4112 727 0.2122 kernel-2.6.28.4_2.vmlinux sysfs_slab_alias
1659 0.4056 290 0.0847 git find_pack_entry_one
1480 0.3619 1307 0.3816 kernel-2.6.28.4_2.vmlinux ext4_writepage_trans_blocks
Notice the memmove line, where the CPU did 7710 / 277 = 27.8 cycles
per instruction, and compared to the total cycles spent inside the
source code of GIT for this command, all the memmove() calls
translates to (7710 * 100) / 14775 = 52.2% of this.
Retesting with a GIT program compiled for gcov usage, I found out that
the memmove() calls came from remove_index_entry_at() in read-cache.c,
where we have:
memmove(istate->cache + pos,
istate->cache + pos + 1,
(istate->cache_nr - pos) * sizeof(struct cache_entry *));
remove_index_entry_at() is called 4902 times from check_updates() in
unpack-trees.c, and each time called we move each cache_entry pointers
(from the removed one) one step to the left.
Since we have 28828 entries in the cache this time, and if we on
average move half of them each time, we in total move approximately
4902 * 0.5 * 28828 * 4 = 282 629 712 bytes, or twice this amount if
each pointer is 8 bytes (64 bit).
OK, is seems that the function check_updates() is called 28 times, so
the estimated guess above had been more correct if check_updates() had
been called only once, but the point is: we get lots of bytes moved.
To fix this, and use an O(N) algorithm instead, where N is the number
of cache_entries, we delete/remove all entries in one loop through all
entries.
From a retest, the new remove_marked_cache_entries() from the patch
below, ended up with the following output line from oprofile:
46 0.0105 15 0.0041 git remove_marked_cache_entries
If we can trust the numbers from oprofile in this case, we saved
approximately ((7710 - 46) * 20000) / (2 * 1000 * 1000 * 1000) = 0.077
seconds CPU time with this fix for this particular test. And notice
that now the CPU did only 46 / 15 = 3.1 cycles/instruction.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By having flags represented as bits in the new member variable 'flags',
it will be easier to use parse_options when dir_struct is involved.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The underlying plumbing commands are not run with -z option, so the paths
returned from them need to be unquoted as needed.
Remove the now stale BUGS section from git-add documentaiton as suggested
by Teemu Likonen.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent addition to the ref_item struct was not taken care of, leading
to a segmentation fault when accessing the (uninitialized) "dest" member.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many e-mail based development communities require non-flowed text to carry
patches to prevent whitespaces from getting mangled, but there is no easy
way to tell Thunderbird MUA not to use format=flowed, unless you configure
it to do so unconditionally for all outgoing mails.
A workaround for users who use git-imap-send is to wrap the patch in "pre"
element in the draft folder as an HTML message, and tell Thunderbird to
send "text only". Thunderbird turns such a message into a non-flowed
plain text when sending it out, which is what we want for patch e-mails.
Signed-off-by: Jeremy White <jwhite@codeweavers.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 6564828 (git-send-email: Generalize auto-cc recipient
mechanism., 2007-12-25) we can suppress automatic Cc generation
separately for each of the possible address sources. However,
--suppress-cc=sob suppressed both SOB lines and body (but not header)
Cc lines, contrary to the name.
Change --suppress-cc=sob to mean only SOB lines, and add separate
choices 'bodycc' (body Cc lines) and 'body' (both 'sob' and 'bodycc').
The option --no-signed-off-by-cc now acts like --suppress-cc=sob,
which is not backwards compatible but matches the name of the option.
Also update the documentation and add a few tests.
Original patch by me. Revised by Thomas Rast, who contributed the
documentation and test updates.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git format-patch is given multiple --cc arguments, it generates a
Cc header that looks like:
Cc: first@example.com,
second@example.com,
third@example.com
Before this commit, send-email was unable to handle such a message as it
did not handle folded header lines, nor multiple recipients in a Cc
line.
This patch:
- Unfolds header lines by pre-processing the header before extracting
any of its fields.
- Handles Cc lines with multiple recipients.
- Adds use of Mail::Address if available for splitting Cc line and
the "Who should the emails be sent to?" prompt", with fall back to
existing split_addrs() function.
- Tests the new functionality and adds two tests for detecting whether
"From:" appears correctly in message body when patch author differs
from patch sender.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email is supposed to be able to run from outside a repo. This
ability was broken by commits caf0c3d6 (make the message file name more
specific) and 5df9fcf6 (interpret unknown files as revision lists).
This commit provides a fix for both.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both rerere.c and builtin-rerere.c define the static functions
rr_path() and has_resolution() the exact same way. To eliminate this
code duplication this patch turns the functions in rerere.c
non-static, and makes builtin-rerere.c use them. Also, since this
puts these two functions into the global namespace, rename them to
rerere_path() and has_rerere_resolution(), respectively, and rename
their "name" parameter to "hex", because it better reflects what that
parameter actually is.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The branch color constants have the form COLOR_BRANCH_$category. Rename
them to BRANCH_COLOR_$category as this conveys their meaning better.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the literal ANSI escape sequences and replace them by readable
constants.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normally, if the current branch is up to date, the rebase is aborted.
However, it may be desirable to allow rebasing even if the current
branch is up to date. When using the '--whitespace=fix' option -f is
implied.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"\" was treated differently in exclude rules depending on whether a
wildcard match was done. For wildcard rules, "\" was de-escaped in
fnmatch, but this was not done for other rules since they used strcmp
instead. A file named "#foo" would not be excluded by "\#foo", but would
be excluded by "\#foo*".
We now treat all rules with "\" as wildcard rules.
Another solution could be to de-escape all non-wildcard rules as we
read them, but we would have to do the de-escaping exactly as fnmatch
does it to avoid inconsistencies.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the behaviour for editing a commit message, let terminating
the editor with a failure abort the current hunk edit and revisit the
option selection for the hunk.
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several functions make use of "[-n ...]" and "[-z ...]". In many cases,
the variables being tested were declared with "local."
However, several __variables are not, and so they must be replaced with
their ${__-} equivalents.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If .git/HEAD is not readable, __git_ps1 does nothing.
If --is-in-git-dir, __git_ps1 returns " (GIT_DIR!)" as a cautionary
note. The previous behavior would show the branch name (and would
optionally attempt to determine the dirtyState of the directory, which
was impossible because a "git diff" was used).
If --is-in-work-tree, __git_ps1 returns the branch name. Additionally,
if showDirtyState is on, the dirty state is displayed.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The local coding convention in bash completion is to use [...] rather
than test. Additionally,
if [...]; then
is preferred over
if [...]
then
and so matching "if [...]\nthen" were changed accordingly.
Signed-off-by: Ted Pavlic <ted@tedpavlic.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a debug patch which is only to be used while the lstat_cache()
is in the test stage, and should be removed/reverted before the final
relase.
I think it should be useful to catch these warnings, as I it could be
an indication of that the cache would not be very effective if it is
doing ping-pong by switching between different cache types too many
times.
Also, if someone is experimenting with the lstat_cache(), this patch
will maybe be useful while debugging.
If someone is able to trigger the warning, then send a mail to the GIT
mailing list, containing the first 15 lines of the warning, and a
short description of the GIT commands to trigger the warnings.
I hope someone is willing to use this patch for a while, to be able to
catch possible ping-pong's.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently inside show_patch_diff() we have an fstat() call after an
ok lstat() call. Since before the call to fstat() we have already
tested for the link case with S_ISLNK(), the fstat() can be removed.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently inside write_entry() we do an lstat(path, &st) call on a
file which have just been opened inside the exact same function. It
should be better to call fstat(fd, &st) on the file while it is open,
and it should be at least as fast as the lstat() method.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The switch-cases for S_IFREG and S_IFLNK was so similar that it will
be better to do some cleanup and use the common parts of it.
And the entry.c file should now be clean for 'gcc -Wextra' warnings.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the call to memcpy() and strchr() for each path component
tested, and instead add each path component as we go forward inside
the while-loop.
Impact: small optimisation
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently inside unlink_entry() if we get a successful removal of one
file with unlink(), we try to remove the leading directories each and
every time. So if one directory containing 200 files is moved to an
other location we get 199 failed calls to rmdir() and 1 successful
call.
To fix this and avoid some unnecessary calls to rmdir(), we schedule
each directory for removal and wait much longer before we do the real
call to rmdir().
Since the unlink_entry() function is called with alphabetically sorted
names, this new function end up being very effective to avoid
unnecessary calls to rmdir(). In some cases over 95% of all calls to
rmdir() is removed with this patch.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Swap function argument pair (length, string) into (string, length) to
conform with the commonly used order inside the GIT source code.
Also, add a note about this fact into the coding guidelines.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the function to longst_path_match() and generalise it such that
it can also be used by other functions.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the if-else test in longest_match_lstat_cache() such that we
only have one simple if test. Instead of testing for 'i == cache.len'
or 'i == len', we transform this to a common test for 'i == max_len'.
And to further optimise we use 'i >= max_len' instead of 'i ==
max_len', the reason is that it is now the exact opposite of one part
inside the while-loop termination expression 'i < max_len && name[i]
== cache.path[i]', and then the compiler can probably reuse a test
instruction from it.
We also throw away the arguments to reset_lstat_cache(), such that all
the safeguard logic inside lstat_cache() is handled at one place.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idea was originated by discussion about usability of manually
editing the config file in 'special needs' systems such as Windows. Now
the user can forget a bit about where the config files actually are.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently the msysgit repository has got a '1.6.1-msysgit1'
tag, which, when used to build the git version, is not
handled gracefully by the git-gui version code.
This patch changes the regular expressions to fix it, and
removes the hardcoded 'rc' string. Now git-gui can accept
a version tail like '.foo123.GIT.bar.456.7.g89ab'
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the index update machinery and git diff happen to disagree
on whether a particular file is modified, it may cause git-gui
to enter an infinite index rescan loop, where an empty diff
starts a rescan, which finds the same set of files modified,
and tries to display the diff for the first one, which happens
to be the empty one. A current example of a possible disagreement
point is the autocrlf filter.
This patch breaks the loop by using a global counter to track
the auto-rescans. The variable is reset whenever a non-empty
diff is displayed.
Another suggested approach, which is based on giving the
--exit-code argument to git diff, cannot be used, because
diff-files seems to trust the timestamps in the index, and
returns a non-zero code even if the file is actually
unchanged, which essentially defeats the purpose of the
auto-rescan logic.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Valgrind 3.4.0 is pretty new, and even if --track-origins is a nice
feature, it is not the end of the world if that is not available. So
play nice and use that option only when only an older version of
valgrind is available.
In the same spirit, refrain from the use of '...' in suppression
files, which is also a feature only valgrind 3.4 and newer understand.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not make much sense to run the (expensive) valgrind tests and
not look at the output.
To prevent output from scrolling out of reach, the parameter --tee is
implied, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After running the valgrind tests with GIT_TEST_TREE=t, the test output
is in the test-results/$TEST.out files.
Call ./valgrind/analyze.sh in $GIT_ROOT/t/ to group the valgrind errors
by backtrace.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is easy to forget running valgrinded tests without -v, and it is
also easy to forget to redirect the output to "tee" (lest the output
scroll out of the terminal's buffer). Running "make valgrind" will
take care of all that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When tests are run in parallel and a few tests fail, it does not help
that the output of the terminal is totally confusing, as you rarely know
which test which line came from.
So introduce the option '--tee' which triggers that the output of the
tests will be written to t/test-results/$TEST.out in addition to the
terminal, where $TEST is the basename of the script.
Unfortunately, there seems to be no way to redirect a given file
descriptor to a specified subprocess in POSIX shell, only redirection
to a file is supported via 'exec > $FILE'.
At least with bash, one might think that 'exec >($COMMAND)' would work
as intended, but it does not.
The common way to work around the lack of proper tools support is to
work with named pipes, alas, one of our most beloved platforms does not
really support named pipes. Besides, we would need a pipe for every
script, as the whole point of this patch is to allow parallel execution.
Therefore, we handle the redirection in the following way: when '--tee'
was passed to the test script, the variable GIT_TEST_TEE_STARTED is set
(to avoid triggering that code path again) and the script is started
_again_, in a subshell, redirected to the command "tee".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes --valgrind try to override _all_ Git binaries in the
PATH, and it makes it an error to call *.sh and *.perl scripts directly.
While it is not strictly necessary to look through the whole PATH to
find git binaries to override, it is in line with running an expensive
test (which valgrind is) to make extra sure that only binaries are
tested that actually come from the git.git checkout.
In the same spirit, we can test that neither our test suite nor our
scripts try to run the *.sh or *.perl scripts directly.
It's more like a "because we can" than a "this is tightly connected
to valgrind", but in the author's opinion "because we can" is "so we
should" in this case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some Linux systems, we get a host of Cond and Addr errors
from calls to dlopen that are caused by nss modules. We
should be able to safely ignore anything happening in
ld-*.so as "not our problem."
[Johannes: I added some more... unfortunately using valgrind 3.4.0 syntax]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds the ability to use valgrind's memcheck tool to
diagnose memory problems in Git while running the test scripts.
It requires valgrind 3.4.0 or newer.
It works by creating symlinks to a valgrind script, which have the same
name as our Git binaries, and then putting that directory in front of
the test script's PATH as well as set GIT_EXEC_PATH to that directory.
Git scripts are symlinked from that directory directly.
That way, Git binaries called by Git scripts are valgrinded, too.
Valgrind can be used by specifying "GIT_TEST_OPTS=--valgrind" in the
make invocation. Any invocation of git that finds any errors under
valgrind will exit with failure code 126. Any valgrind output will go
to the usual stderr channel for tests (i.e., /dev/null, unless -v has
been specified).
If you need to pass options to valgrind -- you might want to run
another tool than memcheck, for example -- you can set the environment
variable GIT_VALGRIND_OPTIONS.
A few default suppressions are included, since libz seems to trigger
quite a few false positives. We'll assume that libz works and that we
can ignore any errors which are reported there.
Note: it is safe to run the valgrind tests in parallel, as the links in
t/valgrind/bin/ are created using proper locking.
Initial patch and all the hard work by Jeff King.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As pointed out in msysgit bug #181, when a non-locale encoding is
used for commits, post-commit status messages display the subject
incorrectly. It happens because the file handle is not properly
configured before the subject is read back.
This patch fixes it by factoring out the code that is used to setup
the output handle into a separate function, and calling it from
the reading code.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Acked-by: Robin Rosenberg <robin.rosenberg@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When the final blame is laid for a line to a <commit, path> pair, it also
gives a "previous" information to --porcelain and --incremental output
format. It gives the parent commit of the blamed commit, _and_ a path in
that parent commit that corresponds to the blamed path --- in short, it is
the origin that would have been blamed (or passed blame through) for the
line _if_ the blamed commit did not change that line.
This unfortunately makes sanity checking of refcount quite complex, so I
ripped it out for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both the --porcelain and --incremental format shared the same output
format but implemented with two identical codepaths. This merges them
into one shared function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-12 13:21:51 -07:00
822 changed files with 47716 additions and 13631 deletions
If you want to undo a commit other than the latest on a branch,
linkgit:git-revert[1] is your friend.
The second form with 'paths' is used to revert selected paths in
the index from a given commit, without moving HEAD.
The second and third forms with 'paths' and/or --patch are used to
revert selected paths in the index from a given commit, without moving
HEAD.
OPTIONS
@ -50,6 +52,15 @@ OPTIONS
and updates the files that are different between the named commit
and the current commit in the working tree.
-p::
--patch::
Interactively select hunks in the difference between the index
and <commit> (defaults to HEAD). The chosen hunks are applied
in reverse to the index.
+
This means that `git reset -p` is the opposite of `git add -p` (see
linkgit:git-add[1]).
-q::
Be quiet, only report errors.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
