git svn gc will compress the unhandled.log files that git svn mkdirs reads,
causing git svn mkdirs to skip directory creation.
[ew: trivial whitespace cleanups]
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Robert Zeh <robert.a.zeh@gmail.com>
svn+ssh:// repositories often have userinfo embedded in the URL
which were stripped out of the "git-svn-id:" trailers. Since
the SVN::Client::copy function takes userinfo into account when
matching URLs for SVN repositories, we need to retrieve the full
URL with embedded userinfo in it to avoid mismatched URLs.
Tested-by: Florian Köberle <florian@fkoeberle.de>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This appears to be a trivial case where array indices were being
passed to git rev-list, instead of the contents stored in the
array itself.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The human-readable author and committer name can be missing from
commits imported from foreign SCM interfaces. Make sure we parse
the "author" and "committer" line a bit more leniently and avoid
segfaulting by assuming the name always exists.
Signed-off-by: David Reiss <dreiss@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change git-svn not to impose a limit of 16 parents on a merge.
This limit in git-svn artificially prevents cloning svn repositories
that contain commits with more than 16 merge parents.
The limit was removed from builtin-commit-tree.c for git v1.6.0 in commit
ef98c5cafb, so there is no need to check for it
it in git-svn.
Signed-off-by: Andrew Myrick <amyrick@apple.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
The old function was incorrect; in some instances it marks a cherry picked
range as a merged branch (because of an incorrect assumption that
'rev-list COMMIT --not RANGE' would work). This is replaced with a
function which should detect them correctly, memoized to limit the expense
of dealing with branches with many cherry picks to one 'merge-base' call
per merge, per branch which used cherry picking.
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
The old function would have to check all mentioned merge tips, every time
that the mergeinfo ticket changed. This involved 1-2 rev-list operation
for each listed mergeinfo line. If there are a lot of feature branches
being merged into a trunk, this makes for a very expensive operation for
detecting the new parents on every merge.
This new version first uses a single 'rev-list' to figure out which commit
ranges are already reachable from the parents. This is used to eliminate
the already merged branches from the list.
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
SVN's list of commit ranges in mergeinfo tickets is inclusive, whereas
git commit ranges are exclusive on the left hand side. Also, the end
points of the commit ranges may not exist; they simply delineate
ranges of commits which may or may not exist. Fix these two mistakes.
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Each time the svn mergeinfo ticket changes, we look it up in the rev_map;
when there are a lot of merged branches, this will result in many repeated
lookups of the same information for subsequent commits. Arrange the slow
part of the function so that it may be memoized, and memoize it. The more
expensive revision walking operation can be memoized separately.
[ew: changed "next" to "return" for function exit]
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
As shown, git-svn has some problems; not all svn merges are correctly
detected, and cherry picks may incorrectly be detected as real merges.
These test cases will be marked as _success once the relevant fixes are in.
Signed-off-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
When using the -r/--revision argument to fetch deleted history,
calling SVN::Ra::get_log() from an SVN::Ra object initialized
to track the deleted URL will fail.
This regression was introduced in:
commit 4aacaeb3dc
"fix shallow clone when upstream revision is too new"
We now ignore errors from SVN::Ra::get_log() here because using
--revision will always override the value of $head here if
(and only if) we're tracking deleted directories.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* maint:
rebase -i: abort cleanly if the editor fails to launch
technical-docs: document hash API
api-strbuf.txt: fix typos and document launch_editor()
If the user's configured editor is emacsclient, the editor
will fail to launch if emacs is not running and the git
command that tried to lanuch the editor will abort. For most
commands, all you have to do is to start emacs and repeat
the command.
The "git rebase -i" command, however, aborts without cleaning
the "$GIT_DIR/rebase-merge" directory if it fails to launch the
editor, so you'll need to do "git rebase --abort" before
repeating the rebase command.
Change "git rebase -i" to terminate using "die_abort" (instead of
with "die") if the initial launch of the editor fails.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git svn gc" command creates and appends to unhandled.log.gz
files which should be parsed before the uncompressed
unhandled.log files.
Reported-by: Robert Zeh
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* maint:
Git 1.6.5.7
worktree: don't segfault with an absolute pathspec without a work tree
ignore unknown color configuration
help.autocorrect: do not run a command if the command given is junk
Illustrate "filter" attribute with an example
If a command is run with an absolute path as a pathspec inside a bare
repository, e.g. "rev-list HEAD -- /home", the code tried to run strlen()
on NULL, which is the result of get_git_work_tree(), and segfaulted. It
should just fail instead.
Currently the function returns NULL even inside .git/ in a repository
with a work tree, but that is a separate issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing the config file, if there is a value that is
syntactically correct but unused, we generally ignore it.
This lets non-core porcelains store arbitrary information in
the config file, and it means that configuration files can
be shared between new and old versions of git (the old
versions might simply ignore certain configuration).
The one exception to this is color configuration; if we
encounter a color.{diff,branch,status}.$slot variable, we
die if it is not one of the recognized slots (presumably as
a safety valve for user misconfiguration). This behavior
has existed since 801235c (diff --color: use
$GIT_DIR/config, 2006-06-24), but hasn't yet caused a
problem. No porcelain has wanted to store extra colors, and
we once a color area (like color.diff) has been introduced,
we've never changed the set of color slots.
However, that changed recently with the addition of
color.diff.func. Now a user with color.diff.func in their
config can no longer freely switch between v1.6.6 and older
versions; the old versions will complain about the existence
of the variable.
This patch loosens the check to match the rest of
git-config; unknown color slots are simply ignored. This
doesn't fix this particular problem, as the older version
(without this patch) is the problem, but it at least
prevents it from happening again in the future.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a given command is not found, then help.c tries to guess which one the
user could have meant. If help.autocorrect is 0 or unset, then a list of
suggestions is given as long as the dissimilarity between the given command
and the candidates is not excessively high. But if help.autocorrect was
non-zero (i.e., a delay after which the command is run automatically), the
latter restriction on dissimilarity was not obeyed.
In my case, this happened:
$ git ..daab02
WARNING: You called a Git command named '..daab02', which does not exist.
Continuing under the assumption that you meant 'read-tree'
in 4.0 seconds automatically...
The patch reuses the similarity limit that is also applied when the list of
suggested commands is printed.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The example was taken from aa4ed402c9
(Add 'filter' attribute and external filter driver definition).
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support the new options --all, --prune, and --dry-run for
'git fetch'.
As the --multiple option was primarily introduced to enable
'git remote update' to be re-implemented in terms of 'git fetch'
(16679e37) and is not likely to be used much from the command
line, it does not seems worthwhile to complicate the code
(to support completion of multiple remotes) to handle it.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Giving --format from the command line, or using output file extention to
DWIM the output format, with a pathspec that is disambiguated with an
explicit double-dash on the command line, e.g.
git archive -o file --format=zip HEAD -- path
git archive -o file.zip HEAD -- path
didn't work correctly.
This was because the code reordered (when one was given) or added (when
the format was inferred) a --format argument at the end, effectively
making it to "archive HEAD -- path --format=zip", i.e. an extra pathspec
that is unlikely to match anything.
The command line argument list should always be "options, revs and then
paths", and we should set a good example by inserting the --format at the
beginning instead.
Reported-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This hook runs after "git fetch" in the repository the objects are
fetched from as the user who fetched, and has security implications.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://repo.or.cz/git-gui:
git-gui: suppress RenderBadPicture X error caused by Tk bug
git-gui: Increase blame viewer usability on MacOS.
git-gui: search 4 directories to improve statistic of gc hint
git gui: make current branch default in "remote delete branch" merge check
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Fix selection of tags
gitk: Default to the system colours on Windows
gitk: Update Japanese translation
gitk: Fix "git gui blame" invocation when called from top-level directory
gitk: Disable checkout of remote branches
gitk: Improve appearance of radiobuttons and checkbuttons
gitk: Skip translation of "wrong Tcl version" message
gitk: Add Japanese translation
gitk: Use the --submodule option for displaying diffs when available
gitk: Fix diffing committed -> staged (typo in diffcmd)
gitk: Add configuration for UI colour scheme
gitk: Don't compare fake children when comparing commits
gitk: Show diff of commits at end of compare-commits output
gitk: Add a user preference to enable/disable use of themed widgets
gitk: Fix errors in the theme patch
gitk: Use themed tk widgets
gitk: Restore scrolling position of diff pane on back/forward in history
* mm/maint-merge-ff-error-message-fix:
builtin-merge: show user-friendly error messages for fast-forward too.
merge-recursive: make the error-message generation an extern function
Conflicts:
merge-recursive.c
If a clone errors out because of a missing author, or user interrupt,
this allows `git svn fetch` to resume seamlessly, rather than forcing
the user to re-provide the path to the authors file.
[ew: shortened subject]
Signed-off-by: Alex Vandiver <alex@chmrr.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
If --authors-file is passed a relative path, cloning will work, but
future `git svn fetch`es will fail to locate the authors file
correctly. Thus, use File::Spec->rel2abs to determine an absolute
path for the authors file before setting it.
Signed-off-by: Alex Vandiver <alex@chmrr.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
This reverts commit c0ecb07048 "git-pull.sh:
Fix call to git-merge for new command format" and
commit b81e00a965 "git-merge: a deprecation
notice of the ancient command line syntax".
They caused a "git pull" (without any arguments, and without any local
commits---only to update to the other side) to warn that commit log
message is ignored because the merge resulted in a fast-forward.
Another possible solution is to add an extra option to "git merge" so that
"git pull" can tell it that the message given is not coming from the end
user (the canned message is passed just in case the merge resulted in a
non-ff and caused commit), but I think it is easier _not_ to deprecate the
old syntax.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 24ab81a fixed the deletion of empty files, but broke
deletion of non-empty files. The approach it took was to
factor out the "deleted" line from the patch header into its
own hunk, the same way we do for mode changes. However,
unlike mode changes, we only showed the special "delete this
file" hunk if there were no other hunks. Otherwise, the user
would annoyingly be presented with _two_ hunks: one for
deleting the file and one for deleting the content.
This meant that in the non-empty case, we forgot about the
deleted line entirely, and we submitted a bogus patch to
git-apply (with "/dev/null" as the destination file, but not
marked as a deletion).
Instead, this patch combines the file deletion hunk and the
content deletion hunk (if there is one) into a single
deletion hunk which is either staged or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also adds a test case for:
"git svn: Don't create empty directories whose parents were deleted"
which was the reason we found this bug in the first place.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Commit 6111b93 "git svn: attempt to create empty dirs on clone+rebase"
will create empty directories 'a/b' and 'a/c' if they were previously
created in SVN, even if their parent directory 'a' was deleted.
For example, unhandled.log may contain lines like this:
r32
+empty_dir: packages/sipb-xen-remctl-auto/sipb-xen-remctl-auto/files/etc/remctl/sipb-xen-auto/acl
+empty_dir: packages/sipb-xen-remctl-auto/sipb-xen-remctl-auto/files/etc/remctl/sipb-xen-auto/machine.d
+empty_dir: packages/sipb-xen-remctl-auto/sipb-xen-remctl-auto/files/etc/remctl/sipb-xen-auto/moira-acl
[...]
r314
-empty_dir: packages/sipb-xen-remctl-auto
[ew: rewrote to be line-wrapped at <= 80-columns]
Reported-by: Evan Broder <broder@mit.edu>
Signed-off-by: Greg Price <price@ksplice.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
When merging branches based on svk:merge properties, a single merge
can have updated or added multiple svk:merge lines. Attempt to
include the minimal set of parents by sorting the merge properties in
order of revision, highest to lowest.
Signed-off-by: Alex Vandiver <alex@chmrr.net>
Acked-by: Sam Vilain <sam@vilain.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Due to a bug in Tk, git-gui almost always (unless git-gui is closed
right after starting) produces an X window error message on exit,
something like:
X Error of failed request: RenderBadPicture (invalid Picture parameter)
Major opcode of failed request: 150 (RENDER)
Minor opcode of failed request: 7 (RenderFreePicture)
Picture id in failed request: 0x3a000dc
Serial number of failed request: 1965
Current serial number in output stream: 1980
Respective Tk bug report is here:
http://sourceforge.net/tracker/?func=detail&atid=112997&aid=1821174&group_id=12997
This bug is triggered only when the send command is blocked via
rename send {} . The following patch re-enables send just before
quiting git-gui to suppress the error.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I just wanted to add the recently learnt '--reset-author' option, but
then noticed that there are many more options missing. This patch
adds support for all of 'git commit's options, except '--allow-empty',
because it is primarily there for foreign scm interfaces.
Furthermore, this patch also adds support for completing the arguments
of those options that take a non-filename argument: valid modes are
offered for '--cleanup' and '--untracked-files', while refs for
'--reuse-message' and '--reedit-message', because these two take a
commit as argument.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On MacOS raising a window causes the focus to be transferred
to it -- although it may actually be a bug in the Tcl/Tk port.
When this happens with the blame viewer tooltips, it makes
the interface less usable, because Entry and Leave handlers
on the text view cause the tip to disappear once the mouse
is moved even 1 pixel.
This commit makes the code raise the main window on MacOS
when Tk 8.5 is used. This version seems to properly support
wm transient by making the tip stay on top of the master,
so reraising the master does not cause it to disappear. Thus
the only remaining sign of problems is slight UI flicker
when focus is momentarily transferred to the tip and back.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
On Windows, git-gui suggests running the garbage collector if it finds
1 or more files in .git/objects/42 (as opposed to 8 files on other
platforms). The probability of that happening if the repo contains
about 100 loose objects is 32%. The probability for the same to happen
when searching 4 directories is only 8%, which is bit more reasonable.
Also remove $objects_limit from the message, because we already know
that we are above (or close to) that limit. Telling the user about
that number does not really give him any useful information.
The following octave script shows the probability for at least m*q
objects to be found in q subdirectories of .git/objects if n is the
total number of objects.
q = 4;
m = [1 2 8];
n = 0:10:2000;
P = zeros(length(n), length(m));
for k = 1:length(n)
P(k, :) = 1-binocdf(q*m-1, n(k), q/(256-q));
end
plot(n, P);
n \ q 1 4
50 18% 1%
100 32% 8%
200 54% 39%
500 86% 96%
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We already do the same when locally deleting a branch.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
What used to happen is that diffcore_count_changes() simply ignored any
hashes in the destination that didn't match hashes in the source. EXCEPT
if the source hash didn't exist at all, in which case it would count _one_
destination hash that happened to have the "next" hash value. As a
consequence, newly added material was often undercounted, making output
from --dirstat and "complete rewrite" detection used by -B unrelialble.
This changes it so that:
- whenever it bypasses a destination hash (because it doesn't match a
source), it counts the bytes associated with that as "literal added"
- at the end (once we have used up all the source hashes), we do the same
thing with the remaining destination hashes.
- when hashes do match, and we use the difference in counts as a value,
we also use up that destination hash entry (the 'd++').
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing code checked to make sure we were not in a bare
repository when doing a hard reset. However, we should take
this one step further, and make sure we are in a worktree.
Otherwise, we can end up munging files inside of '.git'.
Furthermore, we should do the same check for --merge resets,
which have the same properties. Actually, a merge reset of
HEAD^ would already complain, since further down in the code
we want a worktree. However, it is nicer to check up-front;
then we are sure we cover all cases ("git reset --merge"
would run, even though it wasn't doing anything) and we can
give a more specific message.
Add tests to t7103 to cover these cases and some missing ones.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --stringparam option is not available on older xmlto versions.
Instead, set man.base.url.for.relative.links via a .xsl file. Older
docbook versions will ignore this without causing grief to users of
older xmlto versions.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mention that path parameters are based on the current working directory.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
--
Documentation/git-archive.txt | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rr-cache directory should always exist if we are doing
garbage collection (earlier code paths check this
explicitly), but we may not necessarily succeed in opening
it (for example, due to permissions problems). In that case,
we should print an error message rather than simply
segfaulting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/maint-hint-failed-merge:
user-manual: Document that "git merge" doesn't like uncommited changes.
merge-recursive: point the user to commit when file would be overwritten.
* mm/config-pathname-tilde-expand:
Documentation: avoid xmlto input error
expand_user_path: expand ~ to $HOME, not to the actual homedir.
Expand ~ and ~user in core.excludesfile, commit.template
* jk/maint-break-rename-reduce-memory:
diffcore-rename: reduce memory footprint by freeing blob data early
diffcore-break: save cnt_data for other phases
diffcore-break: free filespec data as we go
Newer DocBook stylesheets want man.base.url.for.relative.links
parameter set when formatting manpages with external references
to turn them into full URLs, and leave a helpful "you should
set this parameter" message in the output. Earlier we added
the MAN_BASE_URL make variable to specify the value for it.
When MAN_BASE_URL is not given, it ought to be safe to set the
parameter to empty; it would result in an empty leading path for
older stylesheets that ignore the parameter, and newer ones
would produce the same "relative URL" without the message.
Unfortunately, older xmlto (at least version 0.0.18 released in
early 2004 that comes with RHEL/CentOS 5) does not understand
the --stringparam command line option, so we cannot add the
parameter definition unconditionally to the command line. Work
it around by passing the parameter only when set.
If you do not have a suitable URL prefix, you can pass a quoted empty
string to it, like so:
$ make MAN_BASE_URL='""'
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When loading a notes tree, the code primarily looks for SHA1-like paths
whose total length (discounting directory separators) are 40 chars
(interpreted as valid note entries) or less (interpreted as subtree
entries that may in turn contain note entries when unpacked).
However, there is an additional condition that must hold for valid
subtree entries: They must be _tree_ objects (duh).
This patch adds an appropriate test for this condition, thereby fixing
the crash that occured when passing a non-tree object to the tree-walk
API.
The patch also adds another selftest verifying correct behaviour of
non-notes in note trees.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--no-chain-reply-to' option is a Getopt::Long boolean option. The
'--no-' prefix (as in --no-chain-reply-to) for boolean options is not
supported in Getopt::Long version 2.32 which was released with Perl 5.8.0.
This version only supports '--no' as in '--nochain-reply-to'. More recent
versions of Getopt::Long, such as version 2.34, support either prefix. So
use the older form in the tests.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some ancient platforms do not have an extensive list of alternate names for
character encodings. For example, Solaris 7 and IRIX 6.5 do not know that
ISO-8859-1 is the same as ISO8859-1. Modern platforms do know this, so use
the older name.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pull --rebase fails because it cannot find what branch to
merge against, the error message implies we are trying to merge.
Say "rebase against" instead of "merge with" to avoid confusion.
The configuration suggested to remedy the situation uses a
confusing syntax, with variables specified in the dotted form
accepted by 'git config' but separated from their values by the
'=' delimiter used by config files. Since the user will have to
edit this output anyway, it is more helpful to provide a config
file snippet to paste into an editor and modify.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even setting it to empty is better than leaving it unset as it
prevents the warning cruft from appearing in the output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now "git merge <msg> HEAD" is officially deprecated, we should
clean our own use as well.
Signed-off-by: Horst H. von Brand <vonbrand@inf.utfsm.cl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Prepare for 1.6.5.4
merge: do not add standard message when message is given with -m option
Do not misidentify "git merge foo HEAD" as an old-style invocation
Conflicts:
RelNotes
Even if the user explicitly gave her own message to "git merge", the
command still added its standard merge message. It resulted in a
useless repetition like this:
% git merge -m "Merge early part of side branch" `git rev-parse side~2`
% git show -s
commit 37217141e7519629353738d5e4e677a15096206f
Merge: e68e646 a1d2374
Author: しらいし ななこ <nanako3@lavabit.com>
Date: Wed Dec 2 14:33:20 2009 +0900
Merge early part of side branch
Merge commit 'a1d2374f8f52f4e8a53171601a920b538a6cec23'
The gave her own message because she didn't want git to add the
standard message (if she wanted to, she wouldn't have given one,
or she would have prepared it using git-fmt-merge-msg command).
Noticed by Nanako Shiraishi
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was misinterpreted as an ancient style "git merge <message> HEAD
<commit> <commit>..." that merges one (or more) <commit> into the current
branch and record the resulting commit with the given message. Then a
later sanity check found that there is no <commit> specified and gave
a usage message.
Tested-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
help: Do not unnecessarily look for a repository
Documentation: Fix a few i.e./e.g. mix-ups
Documentation: Document --branch option in git clone synopsis
The ancient form of git merge command used in the original sample script
has been copied from Linus and are still found everywhere, I think, and
people may still have it in their scripts, but on the other hand, it is so
unintuitive that even people reasonably familiar with git are surprised by
accidentally triggering the support to parse this ancient form.
Gently nudge people to upgrade their script to more recent and readable
style for eventual removal of the original syntax.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The entries in states->stale list is filled in handle_one_branch() that is
a call-back funcation to for_each_ref() using the callback parameter given
to it. We need to strdup() the refnames (both the string list key and the
value stored in util) for more permanent storage and free them when we are
done.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although 'git help' actually doesn't need to be run inside a git
repository and uses no repository-specific information, it looks for a git
directory. Searching for a git directory can be annoying in auto-mount
environments. With this commit, 'git help' no longer searches for a
repository when run without any options.
7c3baa9 originally modified 'git help -a' to not require a repository.
This applies the same fix for 'git help'.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A git bundle can be transported by several means (such as e-mail), not
only by snekaernet, so use e.g. instead of i.e.
The mix-up in git-bundle.txt is obvious.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-blame:
gitweb: Add link to other blame implementation in blame views
gitweb: Make linking to actions requiring JavaScript a feature
gitweb.js: fix padLeftStr() and its usage
gitweb.js: Harden setting blamed commit info in incremental blame
gitweb.js: fix null object exception in initials calculation
gitweb: Minify gitweb.js if JSMIN is defined
gitweb: Create links leading to 'blame_incremental' using JavaScript
gitweb: Colorize 'blame_incremental' view during processing
gitweb: Incremental blame (using JavaScript)
gitweb: Add optional "time to generate page" info in footer
Conflicts:
Makefile
gitweb/gitweb.css
Add link to 'blame_incremental' action (which requires JavaScript) in
'blame' view, and add link to 'blame' action in 'blame_incremental'
view.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let gitweb turn some links (like 'blame' links) into linking to actions
which require JavaScript (like 'blame_incremental' action) only if
'javascript-actions' feature is enabled.
This means that links to such actions would be present only if both
JavaScript is enabled and 'javascript-actions' feature is enabled.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the --branch option as [-b <name>] in git clones synopsis.
Signed-off-by: David Soria Parra <dsp@php.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fadd069d03 (merge-recursive: give less scary messages when merge did not
start, Sep 7 2009) introduced some friendlier error message for merge
failure, but the messages were shown only for non-fast forward merges.
This patch uses the same for fast-forward.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construction of the struct unpack_trees_error_msgs was done within
git_merge_trees(), which prevented using the same messages easily from
another function.
[jc: backported for 1.6.5 maint before advice_commit_before_merge]
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed to allow test suite to run against a standard
install bin directory instead of GIT_EXEC_PATH.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to call exclude_cmds() after the loop, not during the loop, because
excluding a command from the array can change the indexes of objects in the
array. The result is that, depending on file ordering, some commands
weren't excluded as they should have been.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed to allow the test suite to run against a standard
install bin directory instead of GIT_EXEC_PATH.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give a warning message when send-email uses chain-reply-to to thread the
messages because of the current default, not because the user explicitly
asked to, either from the command line or from the configuration.
This way, by the time 1.7.0 switches the default, everybody will be ready.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ARM SHA-1 implementation was removed by commit 30ae47b
(remove ARM and Mozilla SHA1 implementations, 2009-08-17). Prune
its directory from the list of object files to delete in 'make
clean'.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inspired by the coloring of quilt.
Introduce a separate color and paint the hunk comment part, i.e. the name
of the function, in a separate color "diff.func" (defaults to plain).
Whitespace between hunk header and hunk comment is printed in plain color.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the option to specify the envelope sender as "auto" which
would pick the 'from' address. This is good because now we can specify
the address only in one place in $HOME/.gitconfig and change it easily.
[jc: added tests]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When emit_line() is called with an empty line (but non-zero length, as we
send line terminating LF or CRLF to the function), it used to emit
<SET><RESET> followed by a newline. Stop the wastefulness.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since the initial implementation, "git am" had kept a dead code that
never triggered due to a typo in the variable name. Worse yet, the code,
if it weren't for the typo, would have attempted to add "[PATCH] " at the
beginning of the Subject: header when "git am" is run with its "-k"
option. However, because "git am -k" tells mailinfo to keep such prefix
when parsing the input, the "[PATCH] " added by this dead code would have
really been unnecessary duplicate.
Embarrassing is that we kept _maintaining_ the codepath without anybody
noticing for four years.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We emulate color escape codes on Windows by overriding printf, fprintf,
and fputs. Warn developers that these are the only functions that can be
used to print them.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When given a pathspec that does not match any path in the current work
tree with an explicit "--":
git format-patch <commit> -- <path>
the command still complains that <path> does not exist in the current work
tree and the user needs to explicitly specify "--" and errors out. This
is because it incorrectly removes "--" from the command line arguments
that is later passed to setup_revisions().
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patch structure has def_name component that is used to validate the
sanity of a "diff --git" patch by checking pathnames that appear on the
patch header lines for consistency. The git_header_name() function is
used to compute this out of "diff --git a/... b/..." line, but the code
always stripped one level of prefix (i.e. "a/" and "b/"), without paying
attention to -p<n> option. Code in find_name() function that parses other
lines in the patch header (e.g. "--- a/..." and "+++ b/..." lines) however
did strip the correct number of leading paths prefixes, and the sanity
check between these computed values failed.
Teach git_header_name() to honor -p<n> option like find_name() function
does.
Found and reported by Steven J. Murdoch who also wrote tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are some places in git where a long is passed to htonl/ntohl. llvm
doesn't support matching operands of different bitwidths intentionally.
This patch fixes the build with llvm-gcc (and clang) on x86_64.
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that in Firefox-3.5 inserting with javascript inserts the
literal instead of a space. Fix this by inserting the unicode
representation for instead.
Also fix the off-by-one error in the padding calculation that was
causing one less space to be inserted than was requested by the caller.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Cc: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Internet Explorer 8 stops at beginning of blame filling with the
following bug:
"firstChild is null or not an object"
at this line:
a_sha1.firstChild.data = commit.sha1.substr(0, 8);
It is (probably) caused by the fact that while a_sha1 element, which
looks like this:
<a href=""> </a>
It has a firstChild which is a text node containing only whitespace
(single space character) in other web browsers (Firefox 3.5, Opera 10,
Google Chrome 3.0), IE8 clobbers DOM, removing trailing/leading
whitespace.
Protect against this bug by creating text element if it does not
exist.
Found-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fourth test of show-branch in t1200 test was failing but only
sometimes. It only failed when two commits created in an earlier
test had different timestamps. When they were created within the
same second, the actual output matched the expected output.
Fix this by using test_tick to force reliable timestamps and update
the expected output so it does not to depend on the commits made in
the same sacond.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit ad3f9a7 (Add '--bisect' revision machinery argument) the
'--bisect' option was added to easily pass bisection refs to commands
using the revision machinery.
This patch updates the documentation of the related options to describe
the new behavior.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The IPv6 support functions are loaded dynamically, to maintain backwards
compatibility with versions of Windows prior to XP, and fallback wrappers
are provided, implemented in terms of gethostbyname and gethostbyaddr.
Signed-off-by: Martin Storsjo <martin@martin.st>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The winsock library must be initialized. Since gethostbyname() is the
first function that calls into winsock, it was overridden to do the
initialization. This refactoring helps the next patch, where other
functions can be called earlier.
Signed-off-by: Martin Storsjo <martin@martin.st>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bg/apply-doc:
Fix over-simplified documentation for 'git log -z'
apply: Use the term "working tree" consistently
apply: Format all options using back-quotes
apply: apply works outside a repository
Clarify and correct -z
* mm/maint-hint-failed-merge:
user-manual: Document that "git merge" doesn't like uncommited changes.
merge-recursive: point the user to commit when file would be overwritten.
* jc/log-stdin:
Add trivial tests for --stdin option to log family
Make --stdin option to "log" family read also pathspecs
setup_revisions(): do not call get_pathspec() too early
Teach --stdin option to "log" family
read_revision_from_stdin(): use strbuf
Conflicts:
revision.c
* mr/gitweb-snapshot:
t/gitweb-lib: Split HTTP response with non-GNU sed
gitweb: Smarter snapshot names
gitweb: Document current snapshot rules via new tests
t/gitweb-lib.sh: Split gitweb output into headers and body
gitweb: check given hash before trying to create snapshot
Recognizing \r in a regex is something GNU sed will do, but other sed
implementation's won't (e.g. BSD sed on OS X). Instead of two sed
invocations, use a single Perl script to split output into headers
and body.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/replace:
Documentation: talk a little bit about GIT_NO_REPLACE_OBJECTS
Documentation: fix typos and spelling in replace documentation
replace: use a GIT_NO_REPLACE_OBJECTS env variable
* maint:
pack-objects: split implications of --all-progress from progress activation
instaweb: restart server if already running
prune-packed: only show progress when stderr is a tty
Conflicts:
builtin-pack-objects.c
Currently the --all-progress flag is used to use force progress display
during the writing object phase even if output goes to stdout which is
primarily the case during a push operation. This has the unfortunate
side effect of forcing progress display even if stderr is not a
terminal.
Let's introduce the --all-progress-implied argument which has the same
intent except for actually forcing the activation of any progress
display. With this, progress display will be automatically inhibited
whenever stderr is not a terminal, or full progress display will be
included otherwise. This should let people use 'git push' within a cron
job without filling their logs with useless percentage displays.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Tested-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running 'git instaweb' when an instaweb server is already running will
fail (at least when the port is the same) and overwrite the pid file
used to track the currently running server. This turns out to be
especially annoying when the user tries to stop the previously running
server with 'git instaweb --stop' and is instead greeted with an error
message because the pid file has been destroyed.
Instead of allowing a user to start two instaweb servers, stop the
currently running server first and then start the new one. This should
be fine because it was never really possible to start two instaweb
servers in the first place due to the pid file issue outlined above.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This matches the behavior of other git programs, and helps
keep cruft out of things like cron job output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the extraneous semicolon (';') at the end of the if statement
that allowed the code in its block to execute regardless of the
condition.
This fixes pushing to a smart http backend with chunked encoding.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user has exported the GREP_OPTIONS environment variable, the output
from "grep" and "egrep" in scripted Porcelains may be different from what
they expect. For example, we may want to count number of matching lines,
by "grep" piped to "wc -l", and GREP_OPTIONS=-C3 will break such use.
The approach taken by this change to address this issue is to protect only
our own use of grep/egrep. Because we do not unset it at the beginning of
our scripts, hook scripts run from the scripted Porcelains are exposed to
the same insanity this environment variable causes when grep/egrep is used
to implement logic (e.g. "grep | wc -l"), and it is entirely up to the
hook scripts to protect themselves.
On the other hand, applypatch-msg hook may want to show offending words in
the proposed commit log message using grep to the end user, and the user
might want to set GREP_OPTIONS=--color to paint the match more visibly.
The approach to protect only our own use without unsetting the environment
variable globally will allow this use case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a case statement instead of calling grep to find out if the editor's
name contains the string "vim". Remove the check for emacs, as this
branch did the same as the default one anyway.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ignore display mode escape sequences (colour codes) for the purpose of
text wrapping because they don't have a visible width.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One test case used 'xargs test', which assumes that 'test' is available
as external program. At least on MinGW it is not.
Moreover, 'git format-patch' was invoked in a pipeline, but not as the
last command. Rewrite the test case to catch breakage in 'git format-patch'
as well.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 64485b4a, the documentation for 'git log -z' was
simplified too much. The -z option actually changes the behavior
of 'git log' in two ways: commits will be ended with a NUL
instead of a LF (correctly documented) and the --raw and
--numstat will have NUL as field terminators (omitted in
the documentation for 'git log').
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bg/fetch-multi:
Re-implement 'git remote update' using 'git fetch'
builtin-fetch: add --dry-run option
builtin-fetch: add --prune option
teach warn_dangling_symref to take a FILE argument
remote: refactor some logic into get_stale_heads()
Add missing test for 'git remote update --prune'
Add the configuration option skipFetchAll
Teach the --multiple option to 'git fetch'
Teach the --all option to 'git fetch'
In commit ad3f9a7 (Add '--bisect' revision machinery argument) the
'--bisect' option was added to easily pass bisection refs to
commands using the revision machinery.
So it is now shorter and safer to use the new '--bisect' revision
machinery option, than to compute the refs that we must pass.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This works around a bug in curl versions up to 7.19.4, where disabling the
CURLOPT_NOBODY option sets the internal state incorrectly considering that
CURLOPT_PUT was enabled earlier.
The bug is discussed at http://curl.haxx.se/bug/view.cgi?id=2727981 and is
corrected in the latest version of curl in CVS.
This bug usually has no impact on git, but may surface if using multi-pass
authentication methods.
Signed-off-by: Martin Storsjo <martin@martin.st>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add documentation for core.ignorecase, and mention git-init
in core.filemode and core.symlinks.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A regenerated git-cvsserver database is at risk of having different
CVS revision numbers from an incrementally updated database. Mention
this in the the documentation, and remove an erroneous statement
to the contrary.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since unhandled.log stores paths relative to the repository
root, we need to strip out leading path components if the
directories we're tracking are not the repository root.
Reported-by: Björn Steinbrink
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* mm/config-pathname-tilde-expand:
Documentation: avoid xmlto input error
expand_user_path: expand ~ to $HOME, not to the actual homedir.
Expand ~ and ~user in core.excludesfile, commit.template
* jk/maint-break-rename-reduce-memory:
diffcore-rename: reduce memory footprint by freeing blob data early
diffcore-break: save cnt_data for other phases
diffcore-break: free filespec data as we go
Add a new helper function, strbuf_add_indented_text(), to indent text
without a width limit, and call it from strbuf_add_wrapped_text(). It
respects both indent (applied to the first line) and indent2 (applied to
the rest of the lines); indent2 was ignored by the indent-only path of
strbuf_add_wrapped_text() before the patch.
Two simple test cases are added, one exercising strbuf_add_wrapped_text()
and the other strbuf_add_indented_text().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we're at it, also unset GREP_COLOR and GREP_COLORS in case colouring
is not enabled, to be on the safe side. The presence of these variables
alone is not sufficient to trigger coloured output with GNU grep, but
other implementations may behave differently.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the Table of Contents, there is a notable inconsistency:
first there is "GIT Glossary", followed by "Git Quick Reference"
on the very next line.
Running "grep -c" on user-manual.txt, I find 780 occurrrences of
"git", 37 occurrences of "Git", and 9 occurrences of "GIT".
In general, "git" is the preferred spelling, except at the
beginning of a sentence.
Therefore, change "GIT Glossary" to "Git Glossary" for consistency
with the rest of the document.
Looking at the other eight occurrences of "GIT" I found one other
occurrence that should be changed:
* The mention of "StGIT". Looking at the web pages for "Stacked Git"
at http://www.procode.org/stgit, I only saw the spelling "StGit",
except in http://wiki.procode.org/cgi-bin/wiki.cgi/StGIT_Tutorial,
but that page was last updated in 2006.
The other seven occurrences should not be changed:
* Three occurrences were in the output of 'git show-branch' run
on the git.git repository.
* One occurrence was in the output of 'git cat-file'.
* One occurrence was as part of the file name "GIT-VERSION-GEN".
* Two occurrences were in comments in scripts quoted in a description
of Tony Luck's workflow.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage messages for some commands (such as 'git diff-tree')
are truncated because they don't fit in a fixed buffer of
1024 bytes.
It would be tempting to eliminate the buffer and the problem once
and for all by doing the output in three steps, but doing so could
(according to commit d048a96e) increase the likelyhood of messing
up the display.
So we just increase the size of the buffer.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We explain the user why uncommited changes can be problematic with merge,
and point to "commit" and "stash" for the solution. While talking about
commited Vs uncommited changes, we also make it clear that the result of
a merge is normally commited.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-before-pull is well accepted in the DVCS community, but is
confusing some new users. This should get them back in the right way when
the problem occurs.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal no_reuse_existing flag is set to allow initializing
multiple remotes with the same URL, common with SVM users.
Unfortunately, this flag caused misbehavior when used
with the -R command-line flag for fetching.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The documentation for 'git apply' uses both the terms
"work tree" and "working tree". Since the glossary uses
the term "working tree", change all occurrences of
"work tree" to "working tree".
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for 'git apply' talks about applying a
patch/diff to the index and to the working tree, which seems
to imply that it will not work outside a git repository.
Actually 'git patch' works outside a repository (which can
be useful especially for applying binary or rename patches that
the standard "patch" utility cannot handle), so the documentation
should mention it.
Thanks to Junio for suggesting better wording.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description for -z is too vague and general for the
apply, diff*, and log commands.
Change the description of -z for 'git log' to note that
commits will be separated by NULs.
Change the description of -z for 'git diff*' and 'git apply'
to note that it applies to the --numstat option, and for
'git diff*' also for --raw option.
Also correct the description of the "munging" of pathanmes that
takes place in the absence of -z for the 'git diff*' and
'git apply' commands, namely that apart from the characters mentioned,
double quotes will also be escaped and that the pathname will be
enclosed in double quotes if any characters are escaped.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not write literal "~/" or "~user" but use "{tilde}/" and "{tilde}user";
otherwise the text between them gets enclosed in
"<subscript>...</subscript>".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jh/notes' (early part):
Add selftests verifying concatenation of multiple notes for the same commit
Refactor notes code to concatenate multiple notes annotating the same object
Add selftests verifying that we can parse notes trees with various fanouts
Teach the notes lookup code to parse notes trees with various fanout schemes
Teach notes code to free its internal data structures on request
Add '%N'-format for pretty-printing commit notes
Add flags to get_commit_notes() to control the format of the note string
t3302-notes-index-expensive: Speed up create_repo()
fast-import: Add support for importing commit notes
Teach "-m <msg>" and "-F <file>" to "git notes edit"
Add an expensive test for git-notes
Speed up git notes lookup
Add a script to edit/inspect notes
Introduce commit notes
Conflicts:
.gitignore
Documentation/pretty-formats.txt
pretty.c
* sp/smart-http: (37 commits)
http-backend: Let gcc check the format of more printf-type functions.
http-backend: Fix access beyond end of string.
http-backend: Fix bad treatment of uintmax_t in Content-Length
t5551-http-fetch: Work around broken Accept header in libcurl
t5551-http-fetch: Work around some libcurl versions
http-backend: Protect GIT_PROJECT_ROOT from /../ requests
Git-aware CGI to provide dumb HTTP transport
http-backend: Test configuration options
http-backend: Use http.getanyfile to disable dumb HTTP serving
test smart http fetch and push
http tests: use /dumb/ URL prefix
set httpd port before sourcing lib-httpd
t5540-http-push: remove redundant fetches
Smart HTTP fetch: gzip requests
Smart fetch over HTTP: client side
Smart push over HTTP: client side
Discover refs via smart HTTP server when available
http-backend: more explict LocationMatch
http-backend: add example for gitweb on same URL
http-backend: use mod_alias instead of mod_rewrite
...
Conflicts:
.gitignore
remote-curl.c
* jn/editor-pager:
Provide a build time default-pager setting
Provide a build time default-editor setting
am -i, git-svn: use "git var GIT_PAGER"
add -i, send-email, svn, p4, etc: use "git var GIT_EDITOR"
Teach git var about GIT_PAGER
Teach git var about GIT_EDITOR
Suppress warnings from "git var -l"
Do not use VISUAL editor on dumb terminals
Handle more shell metacharacters in editor names
* bg/format-patch-doc-update:
format-patch: Add "--no-stat" as a synonym for "-p"
format-patch documentation: Fix formatting
format-patch documentation: Remove diff options that are not useful
format-patch: Always generate a patch
* jn/gitweb-log-history:
gitweb: Make 'history' view (re)use git_log_generic()
gitweb: Refactor common parts of 'log' and 'shortlog' views
gitweb: Refactor 'log' action generation, adding git_log_body()
* jn/help-everywhere: (23 commits)
diff --no-index: make the usage string less scary
merge-{recursive,subtree}: use usagef() to print usage
Introduce usagef() that takes a printf-style format
Let 'git <command> -h' show usage without a git dir
Show usage string for 'git http-push -h'
Let 'git http-fetch -h' show usage outside any git repository
Show usage string for 'git stripspace -h'
Show usage string for 'git unpack-file -h'
Show usage string for 'git show-index -h'
Show usage string for 'git rev-parse -h'
Show usage string for 'git merge-one-file -h'
Show usage string for 'git mailsplit -h'
Show usage string for 'git imap-send -h'
Show usage string for 'git get-tar-commit-id -h'
Show usage string for 'git fast-import -h'
Show usage string for 'git check-ref-format -h'
http-fetch: add missing initialization of argv0_path
Show usage string for 'git show-ref -h'
Show usage string for 'git merge-ours -h'
Show usage string for 'git commit-tree -h'
...
Conflicts:
imap-send.c
* jp/fetch-cull-many-refs:
remote: fix use-after-free error detected by glibc in ref_remove_duplicates
fetch: Speed up fetch of large numbers of refs
remote: Make ref_remove_duplicates faster for large numbers of refs
The current man page does a reasonable job at describing branch management
during the development process, but it does not contain any guidance as to
how the branches are affected by releases.
Add a basic introduction to the branch management undertaken during a
git.git release, so that a reader may gain some insight into how the
integration, maintenance, and topic branches are affected during the
release transition, and is thus able to better design the process for their
own project.
Other release activities such as reviews, testing, and creating
distributions are currently out of scope.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are rebasing we know that the header lines in the
patch are good and that we don't need to pick up any headers
from the body of the patch.
This makes it possible to rebase commits whose commit message
start with "From" or "Date".
Test vectors by Jeff King.
Signed-off-by: Lukas Sandström <luksan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the usage string for a subcommand must be printed,
only print the information relevant to that command.
This commit also removes the complete options list from
the first line of the subcommand usage string. Instead,
individual options are documented in the detailed
description following the general usage line.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After running one round of estimate_similarity(), filespecs on either
side will have populated their cnt_data fields, and we do not need
the blob text anymore. We used to retain the blob data to optimize
for smaller projects (not freeing the blob data here would mean that
the final output phase would not have to re-read it), but we are
efficient enough without such optimization for smaller projects anyway,
and freeing memory early will help larger projects.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch fix a missing "s" at the end of an occurence of
"--no-replace-objects" and, while at it, it also improves spelling
and rendering.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This has the same effect as --no-replace-objects option; git ignores the
replace refs. When --no-replace-objects option is passed to git, this
environment variable is set to "1" and exported to subprocesses in order
to propagate the same setting.
It is useful for example for scripts, as the git commands used in them can
now be aware that they must not read replace refs.
Tested-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
4d23660 (describe: when failing, tell the user about options that
work, 2009-10-28) forgot to update the shortcut path where the code
detected and used a possible exact match. This means that an
unannotated tag on HEAD would be used by 'git describe'.
Guard this code path against the new circumstances, where unannotated
tags can be present in ->util even if we're not actually planning to
use them.
While there, also add some tests for --all.
Reported by 'yashi' on IRC.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
i686-apple-darwin9-gcc-4.0.1 (GCC) 4.0.1 (Apple Inc. build 5493) compiler
(and probably others) mistakenly thinks variable 'right' is used
before assigned. Work around it by giving it a fake initialization.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the command line arguments, after giving zero or more revs, you can
feed a line "--" and then feed pathspecs one at a time.
With this
(
echo ^maint
echo --
echo Documentation
) | git log --stat --oneline --stdin master -- t
lists commits that touch Documentation/ or t/ between maint and master.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is necessary because we will later allow pathspecs to be fed from the
standard input, and pathspecs taken from the command line (and converted
via get_pathspec() already) in revs->prune_data too early gets in the way
when we want to append from the standard input.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the logic to read revs from standard input that rev-list knows about
from it to revision machinery, so that all the users of setup_revisions()
can feed the list of revs from the standard input when "--stdin" is used
on the command line.
Allow some users of the revision machinery that want different semantics
from the "--stdin" option to disable it by setting an option in the
rev_info structure.
This also cleans up the kludge made to bundle.c via cut and paste.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is so 2005 (and Linus ;-) to have a fixed 1000-byte buffer that
reads from the user. Let's use strbuf to unlimit the input length.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cygwin has st_blocks in struct stat, but at least on NTFS, the field
counts in blocks of st_blksize bytes, not in 512-byte blocks.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
graph_release() was removed in 064bfbd. Cut it from the API
documentation and a comment.
Signed-off-by: Greg Price <price@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently handleLine() assumes that a commit author name will always
start with a capital letter. It's possible that the author name is
user@example.com and therefore calling a match() on the name will fail
to return any matches. Subsequently joining these matches will cause an
exception. Fix by checking that we have a match before trying to join
the results into a set of initials for the author.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The t/t9700/test.pl script uses method invocation syntax when
using the Cwd module to determine the current working directory.
This fails on cygwin, since cygwin perl specifically checks for
any arguments to the cwd() function and croak()'s with the message
"Usage: Cwd::cwd()". (In perl v5.8.8 distribution, see the file
perl-5.8.8/cygwin/cygwin.c lines 139-157)
In order to avoid the problem, we replace the method invocation
syntax with a simple function call.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 395de250d (Expand ~ and ~user in core.excludesfile, commit.template),
we introduced the mechanism. But expanding ~ using getpw is not what
people overriding $HOME would usually expect. In particular, git looks
for the user's .gitconfig using $HOME, so it's better to be consistent.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a tag is clicked an error is raised due to a missing parameter in
a function call.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
* sb/tutorial-test:
t1200: prepare for merging with Fast-forward bikeshedding
t1200: further modernize test script style
t1200: Make documentation and test agree
t1200: cleanup and modernize test style
* ef/msys-imap:
Windows: use BLK_SHA1 again
MSVC: Enable OpenSSL, and translate -lcrypto
mingw: enable OpenSSL
mingw: wrap SSL_set_(w|r)fd to call _get_osfhandle
imap-send: build imap-send on Windows
imap-send: fix compilation-error on Windows
imap-send: use run-command API for tunneling
imap-send: use separate read and write fds
imap-send: remove useless uid code
These config variables are parsed to substitute ~ and ~user with getpw
entries.
user_path() refactored into new function expand_user_path(), to allow
dynamically allocating the return buffer.
Original patch by Karl Chen, modified by Matthieu Moy, and further
amended by Junio C Hamano.
Signed-off-by: Karl Chen <quarl@quarl.org>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since git is not used in each and every interactive xterm, it
seems best to load completion support with cold caches and then
load each needed thing lazily. This has most of the speed
advantage of pre-generating everything at build time, without the
complication of figuring out at build time what commands will be
available at run time.
On this slow laptop, this decreases the time to load
git-completion.bash from about 500 ms to about 175 ms.
Suggested-by: Kirill Smelkov <kirr@mns.spb.ru>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Cc: Stephen Boyd <bebarino@gmail.com>
Cc: SZEDER Gábor <szeder@ira.uka.de>
Cc: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.bogomips.org/git-svn:
Document git-svn's first-parent rule
git svn: attempt to create empty dirs on clone+rebase
git svn: add authorsfile test case for ~/.gitconfig
git svn: read global+system config for clone+init
git svn: handle SVN merges from revisions past the tip of the branch
Some test scripts run Perl scripts as if they were git-* scripts, and
thus need to use the same perl that will be put in the shebang line of
git*.perl commands. $PERL_PATH therefore needs to be used instead of
a bare "perl".
The tests can fail if another perl is found in $PATH before the one
defined in $PERL_PATH.
Example test failure caused by this: the perl defined in $PERL_PATH has
Error.pm installed, and therefore the Git.pm's Makefile.PL doesn't install
the private copy. The perl from $PATH doesn't have Error.pm installed, and
all git*.perl scripts invoked during the test will fail loading Error.pm.
Makefile patch by Jeff King <peff@peff.net>.
Signed-off-by: Philippe Bruhat (BooK) <book@cpan.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn has the following rule to detect the SVN base for its
operations: find the first git-svn-id line reachable through
first-parent ancestry. IOW,
git log --grep=^git-svn-id: --first-parent -1
Document this, as it is very important when using merges with git-svn.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
The description of the configuration variable is obsolete and
wrong (saying only file content is used), not just incomplete.
It has used the attribute mechanism for a long time.
The documentation of gitattributes mentions the core.autocrlf
configuration variable in its description of crlf attribute.
Refer to the gitattributes documentation from here as well.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a paragraph about the swapped sides in a --merge rebase, which was
otherwise only documented in the sources.
Add a paragraph about the effects of the 'ours' strategy to the -s
description. Also remove the mention of the 'octopus' strategy, which
was copied from the git-merge description but is pointless in a
rebase.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for --full-name, --full-tree, --abbrev, and --name-only.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" currently an error when you combine the -F and -i flags.
This isn't in line with how GNU grep handles it.
This patch allows the simultaneous use of those flags.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Brian Collins <bricollins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "break" phase works by counting changes between two
blobs with the same path. We do this by splitting the file
into chunks (or lines for text oriented files) and then
keeping a count of chunk hashes.
The "rename" phase counts changes between blobs at two
different paths. However, it uses the exact same set of
chunk hashes (which are immutable for a given sha1).
The rename phase can therefore use the same hash data as
break. Unfortunately, we were throwing this data away after
computing it in the break phase. This patch instead attaches
it to the filespec and lets it live through the rename
phase, working under the assumption that most of the time
that breaks are being computed, renames will be too.
We only do this optimization for files which have actually
been broken, as those ones will be candidates for rename
detection (and it is a time-space tradeoff, so we don't want
to waste space keeping useless data).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we look at each changed file and consider breaking it, we
load the blob data and make a decision about whether to
break, which is independent of any other blobs that might
have changed. However, we keep the data in memory while we
consider breaking all of the other files. Which means that
both versions of every file you are diffing are in memory at
the same time.
This patch instead frees the blob data as we finish with
each file pair, leading to much lower memory usage.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-diff-color-words:
diff --color-words: bit of clean-up
diff --color-words -U0: fix the location of hunk headers
t4034-diff-words: add a test for word diff without context
Conflicts:
diff.c
* jc/maint-blank-at-eof:
diff -B: colour whitespace errors
diff.c: emit_add_line() takes only the rest of the line
diff.c: split emit_line() from the first char and the rest of the line
diff.c: shuffling code around
diff --whitespace: fix blank lines at end
core.whitespace: split trailing-space into blank-at-{eol,eof}
diff --color: color blank-at-eof
diff --whitespace=warn/error: fix blank-at-eof check
diff --whitespace=warn/error: obey blank-at-eof
diff.c: the builtin_diff() deals with only two-file comparison
apply --whitespace: warn blank but not necessarily empty lines at EOF
apply --whitespace=warn/error: diagnose blank at EOF
apply.c: split check_whitespace() into two
apply --whitespace=fix: detect new blank lines at eof correctly
apply --whitespace=fix: fix handling of blank lines at the eof
We already have these checks in many printf-type functions that have
prototypes which are in header files. Add these same checks to
static functions in http-backend.c
Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Found with valgrind while looking for Content-Length corruption in
smart http.
Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We parse unhandled.log files for empty_dir statements and make a
best effort attempt to recreate empty directories on fresh
clones and rebase. This should cover the majority of cases
where users work off a single branch or for projects where
branches do not differ in empty directories.
Since this cannot affect "normal" git commands like "checkout"
or "reset", so users switching between branches in a single
working directory should use the new "git svn mkdirs" command
after switching branches.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We already have these checks in many printf-type functions that have
prototypes which are in header files. Add these same checks to some
more prototypes in header functions and to static functions in .c
files.
cc: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-diff-color-words:
diff --color-words: bit of clean-up
diff --color-words -U0: fix the location of hunk headers
t4034-diff-words: add a test for word diff without context
Conflicts:
diff.c
* rs/pretty-wrap:
log --format: don't ignore %w() at the start of format string
Implement wrap format %w() as if it is a mode switch
Conflicts:
pretty.c
* ja/fetch-doc:
Documentation/merge-options.txt: order options in alphabetical groups
Documentation/git-pull.txt: Add subtitles above included option files
Documentation/fetch-options.txt: order options alphabetically
* jc/receive-pack-auto:
receive-pack: run "gc --auto --quiet" and optionally "update-server-info"
gc --auto --quiet: make the notice a bit less verboase
Make it clear in the docs that the merge takes the tree of HEAD and
ignores everything in the other branches. This should hopefully clear
up confusion, usually caused by the user looking for a strategy that
resolves all conflict hunks in favour of HEAD (which is completely
different and currently not supported).
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b344e161 taught 'git remote update' to understand
[group | remote] as its argument. The man page was updated
to document this change, but the usage string was not.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In ref_remove_duplicates, when we encounter a duplicate and remove it
from the list we need to make sure that the prev pointer stays
pointing at the last entry and also skip over adding the just freed
entry to the string_list.
Previously fetch could crash with:
*** glibc detected *** git: corrupted double-linked list: ...
Also add a test to try and catch problems with duplicate removal in
the future.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The kernel.org hosts where the packages are built are now using Fedora
11, which defaults to sha256 for file digests instead of md5. Older
versions of rpm can not handle these packages. Tell rpmbuild to use md5
file digests for better compatibility.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git_history use git_log_generic, passing git_history_body as one
of its paramaters. This required changes to git_log_generic, in
particular passing more things as parameters.
While refactoring common code of 'log', 'shortlog' and 'history' view,
we did unify pagination, using always the form used by 'history' view,
namely
first * prev * next
in place of
HEAD * prev * next
used by 'log' and 'shortlog' views.
The 'history' view now supports commit limiting via 'hpb' parameter,
similarly to 'shortlog' (and 'log') view. Performance of 'history'
view got improved a bit, as it doesn't run git_get_hash_by_path for
"current" version in a loop. Error detection and reporting for
'history' view changed a bit.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Put the common parts of git_log and git_shortlog into git_log_generic
subroutine: git_log and git_shortlog are now thin wrappers calling
git_log_generic with appropriate arguments.
The unification of code responsible for 'log' and 'shorlog' actions
lead to the following changes in gitweb output
* 'tree' link in page_nav now uses $hash parameter, as was the case
for 'shortlog' but not for 'log'
* 'log' view now respect $hash_parent limiting, like 'shortlog' did
* 'log' view doesn't have special case for empty list anymore, and it
always uses page_header linking to summary view, like 'shortlog'
did.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Put the main part of 'log' view generation into git_log_body,
similarly how it is done for 'shortlog' and 'history' views (and
also for 'tags' and 'heads' views).
This is preparation for extracting common code between 'log',
'shortlog' and 'history' actions.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit for:
git svn: read global+system config for clone+init
Initially lacked a test case because the author was unable to
reproduce it under his test environment, this adds it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since $GIT_DIR does not exist when initializing new repositories,
we can follow back to the global and system config files for
git.
The logic for this was originally introduced when
$GIT_DIR/config was the only config file git could read (back
when "git config" was "git repo-config"), so the function is
renamed to "read_git_config" instead of "read_repo_config".
Signed-off-by: Eric Wong <normalperson@yhbt.net>
When recording the revisions that it has merged, SVN sets the top
revision to be the latest revision in the repository, which is not
necessarily a revision on the branch that is being merged from. When
it is not on the branch, git-svn fails to add the extra parent to
represent the merge because it relies on finding the commit on the
branch that corresponds to the top of the SVN merge range.
In order to correctly handle this case, we look for the maximum
revision less than or equal to the top of the SVN merge range that is
actually on the branch being merged from.
[ew: This includes the following (squashed) commit to prevent
errors during bisect:]
Author: Toby Allsopp <toby.allsopp@navman.co.nz>
Date: Fri Nov 13 09:48:39 2009 +1300
git-svn: add (failing) test for SVN 1.5+ merge with intervening commit
This test exposes a bug in git-svn's handling of SVN 1.5+ mergeinfo
properties. The problematic case is when there is some commit on an
unrelated branch after the last commit on the merged-from branch.
When SVN records the mergeinfo property, it records the latest
revision in the whole repository, which, in the problematic case, is
not on the branch it is merging from.
To trigger the git-svn bug, we modify t9151 to include two SVN merges,
the second of which has an intervening commit. The SVN dump was
generated using SVN 1.6.6 (on Debian squeeze amd64).
Signed-off-by: Toby Allsopp <toby.allsopp@navman.co.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
When run in the top-level directory of a git repository, "git
rev-parse --git-dir" doesn't return an absolute path, but merely
".git", so the selected file for "git gui blame" has a relative path.
The function make_relative then tries to make the already relative
path relative, which results in a path like "../../../../Makefile"
with as many ".." as there are elements of [pwd].
This regression was introduced by commit 9712b81 (gitk: Fix bugs in
blaming code, 2008-12-06), which fixed "git gui blame" when called from
subdirs.
This also fixes it for bare repositories.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
At the command line, trying to check out a remote branch gives you a
detailed warning message, but the gitk GUI currently allows it without
any fuss.
Since the GUI is often used by people much less familiar with git, it
seems reasonable to make the GUI more restrictive than the command line,
not less.
This prevents a lot of detached HEAD commits by new users.
Signed-off-by: Sitaram Chamarty <sitaramc@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Commit 5497f7a23a ("gitk: Add configuration
for UI colour scheme") added a call to tk_setPalette at startup.
Unfortunately, tk_setPalette always chooses a dark red color for
the selectColor value if none is given explicitly, and this makes
checkbuttons and radiobuttons look rather bad.
This restores the previous appearance by specifying selectColor
explicitly. For light backgrounds we use white for selectColor, and
for dark backgrounds we use black. The formula and threshold for
distinguishing light from dark are the same as used in tk_setPalette
for choosing the foreground color.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Extra paragraphs should be prefixed with a plus sign.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our Content-Length needs to report an off_t, which could be larger
precision than size_t on this system (e.g. 32 bit binary built with
64 bit large file support).
We also shouldn't be passing a size_t parameter to printf when
we've used PRIuMAX as the format specifier.
Fix both issues by using uintmax_t for the hdr_int() routine,
allowing strbuf's size_t to automatically upcast, and off_t to
always fit.
Also fixed the copy loop we use inside of send_local_file(), we never
actually updated the size variable so we might as well not use it.
Reported-by: Tarmigan <tarmigan+git@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In theory it is possible for sideband channel #2 to be delayed if
pack data is quick to come up for sideband channel #1. And because
data for channel #2 is read only 128 bytes at a time while pack data
is read 8192 bytes at a time, it is possible for many pack blocks to
be sent to the client before the progress message fifo is emptied,
making the situation even worse. This would result in totally garbled
progress display on the client's console as local progress gets mixed
with partial remote progress lines.
Let's prevent such situations by giving transmission priority to
progress messages over pack data at all times.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide a DEFAULT_PAGER knob so packagers can set the fallback
pager to something appropriate during the build.
Examples:
On (old) solaris systems, /usr/bin/less (typically the first less
found) doesn't understand the default arguments (FXRS), which
forces users to alter their environment (PATH, GIT_PAGER, LESS,
etc) or have a local or global gitconfig before paging works as
expected.
On Debian systems, by policy packages must fall back to the
'pager' command, so that changing the target of the
/usr/bin/pager symlink changes the default pager for all packages
at once.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide a DEFAULT_EDITOR knob to allow setting the fallback
editor to use instead of vi (when VISUAL, EDITOR, and GIT_EDITOR
are unset). The value can be set at build time according to a
system’s policy. For example, on Debian systems, the default
editor should be the 'editor' command.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new "git var GIT_PAGER" command to ask what pager to use.
Without this change, the core.pager configuration is ignored by
these commands.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new "git var GIT_EDITOR" feature to decide what editor to
use, instead of duplicating its logic elsewhere. This should make
the behavior of commands in edge cases (e.g., editor names with
spaces) a little more consistent.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose the command found by setup_pager() for scripts to use.
Scripts can use this to avoid repeating the logic to look for a
proper pager in each command.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose the command used by launch_editor() for scripts to use.
This should allow one to avoid searching for a proper editor
separately in each command.
git_editor(void) uses the logic to decide which editor to use
that used to live in launch_editor(). The function returns NULL
if there is no suitable editor; the caller is expected to issue
an error message when appropriate.
launch_editor() uses git_editor() and gives the error message the
same way as before when EDITOR is not set.
"git var GIT_EDITOR" gives the editor name, or an error message
when there is no appropriate one.
"git var -l" gives GIT_EDITOR=name only if there is an
appropriate editor.
Originally-submitted-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For scripts using "git var -l" to read all logical variables at
once, not all per-variable warnings will be relevant. So suppress
them.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refuse to use $VISUAL and fall back to $EDITOR if TERM is unset
or set to "dumb". Traditionally, VISUAL is set to a screen
editor and EDITOR to a line-based editor, which should be more
useful in that situation.
vim, for example, is happy to assume a terminal supports ANSI
sequences even if TERM is dumb (e.g., when running from a text
editor like Acme). git already refuses to fall back to vi on a
dumb terminal if GIT_EDITOR, core.editor, VISUAL, and EDITOR are
unset, but without this patch, that check is suppressed by
VISUAL=vi.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current technical documentation for the packfile protocol is both
sparse and incorrect. This documents the fetch-pack/upload-pack and
send-pack/ receive-pack protocols much more fully.
Add documentation from Shawn's upcoming http-protocol docs that is
shared by the packfile protocol. protocol-common.txt describes ABNF
notation amendments, refname rules and the packet line format.
Add documentation on the various capabilities supported by the
upload-pack and receive-pack protocols. protocol-capabilities.txt
describes multi-ack, thin-pack, side-band[-64k], shallow, no-progress,
include-tag, ofs-delta, delete-refs and report-status.
Signed-off-by: Scott Chacon <schacon@gmail.com>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since a0e4639 (filter-branch: fix ref rewriting with
--subdirectory-filter, 2008-08-12) git-filter-branch has done
nearest-ancestor rewriting when using a --subdirectory-filter.
However, that rewriting strategy is also a useful building block in
other tasks. For example, if you want to split out a subset of files
from your history, you would typically call
git filter-branch -- <refs> -- <files>
But this fails for all refs that do not point directly to a commit
that affects <files>, because their referenced commit will not be
rewritten and the ref remains untouched.
The code was already there for the --subdirectory-filter case, so just
introduce an option that enables it independently.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Handling $filter_subdir in the usual way requires a separate case at
every use, because the variable is empty when unused.
Furthermore, --subdirectory-filter supplies its own '--', and if the user
provided one himself, such as in
git filter-branch --subdirectory-filter subdir -- --all -- subdir/file
an extra '--' was used as path filter in the call to git-rev-list that
determines the commits that shall be rewritten.
To keep the argument handling sane, we filter $@ to contain only the
non-revision arguments, and store all revisions in $ref_args. The
$ref_args are easy to handle since only the SHA1s are needed; the
actual branch names have already been stored in $tempdir/heads at this
point.
An extra separating -- is only required if the user did not provide
any non-revision arguments, as the latter disambiguate the
$filter_subdir following after them (or fail earlier because they are
ambiguous themselves).
Thanks to Johannes Sixt for suggesting this solution.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start the diff --no-index usage string with "usage:" instead of
"fatal:".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usage messages (for example, from "git merge-recursive -h") are
friendlier when not preceded by "fatal".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some new callers would want to use printf-like formatting, when issuing
their usage messages. An option is to change usage() itself also be like
printf(), which would make it similar to die() and warn().
But usage() is typically fixed, as opposed to die() and warn() that gives
diagnostics depending on the situation. Indeed, the majority of strings
given by existing callsites to usage() are fixed strings. If we were to
make usage() take printf-style format, they all need to be changed to have
"%s" as their first argument.
So instead, introduce usagef() so that limited number of callers can use
it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
http-push already knows how to dump usage if it is given no options, but
it interprets '-h' as the URL to a remote repository:
$ git http-push -h
error: Cannot access URL -h/, return code 6
Dump usage instead. Humans wanting to pass the URL -h/ to curl for some
reason can use 'git http-push -h/' explicitly. Scripts expecting to
access an HTTP repository at URL '-h' will break, though.
Also delay finding a git directory until after option parsing, so
"http-push -h" can be used outside any git repository.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"-p" means "generate patch" in 'git log' and 'git diff', so it's
quite surprising that it means "suppress diffstat" in
'git format-patch'.
Keep the "-p" option for backward compatibility, but add
"--no-stat" as a more intuitive synonym. For backward compatibility
with scripts, we must allow combinations of --stat and --no-stat.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Format git commands and options consistently using back quotes
(i.e. a fixed font in the resulting HTML document).
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To simplify reading the documentation for format-patch, remove the
description of common diff options that are not useful for the
purpose of the command (i.e. "Prepare patches for e-mail submission").
Specifically, this removes the description of the following options:
--raw
-z
--color
--no-color
--color-words
--diff-filter
-S
--pickaxe-all
--pickaxe-regex
-R
--relative
--exit-code
--quiet
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King recently reinstated -p to suppress the default diffstat
(as -p used to work before 68daa64, about 14 months ago).
However, -p is also needed in combination with certain options
(e.g. --stat or --numstat) in order to produce any patch at all.
The documentation does not mention this.
Since the purpose of format-patch is to produce a patch that
can be emailed, it does not make sense that certain combination
of options will suppress the generation of the patch itself.
Therefore:
* Update 'git format-patch' to always generate a patch.
* Since the --name-only, --name-status, and --check suppresses
the generation of the patch, disallow those options,
and remove the description of them in the documentation.
* Remove the reference to -p in the description of -U.
* Remove the descriptions of the options that are synonyms for -p
plus another option (--patch-with-raw and --patch-with-stat).
* While at it, slightly tweak the description of -p itself
to say that it generates "plain patches", so that you can
think of -p as "plain patch" as an mnemonic aid.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Delay search for a git directory until option parsing has finished.
None of the functions used in option parsing look for or read any
files other than stdin, so this is safe.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"unpack-file -h" could be asking to save the contents of a blob
named "-h". Strictly speaking, such a pathological ref name is
possible, but the user would have to had said something like
"tags/-h" to name such a pathological ref already. When used in
scripts, unpack-file is typically not passed a user-supplied tag
name directly.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let "git fast-import -h" (with no other arguments) print usage
before exiting, even when run outside any repository.
Cc: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This only changes the behavior of "git check-ref-format -h"
without any other options and arguments.
This change cannot be breaking backward compatibility, since any
valid refname must contain a /. Most existing scripts use
arguments such as "heads/$foo". If some script checks the
refname "-h" alone, git check-ref-format will still exit with
nonzero status, and the only detrimental side-effect will be a
usage string sent to stderr.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to c6dfb39 (remote-curl: add missing initialization of
argv0_path, 2009-10-13), programs with "main" must call this to
work correctly on MinGW.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Builtins do not need to run setup_worktree() for themselves, since
the builtin machinery runs it for them.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git check-ref-format' has learned --branch and --print options
since the usage string was last updated.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the description next to --assume-unchanged because this option is only
useful in a special case of using that option.
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order not to duplicate functionality, re-implement 'git remote
update' in terms of 'git fetch'.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fetch --dry-run as users of "git remote prune" switching to "git fetch
--prune" may expect it. Unfortunately OPT__DRY_RUN() cannot be used as fetch
already uses "-n" for something else.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fetch to cull stale remote tracking branches after fetching via --prune.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Different callers of warn_dangling_symref() may want to control whether its
output goes to stdout or stderr so let it take a FILE argument.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the logic in builtin-remote.c which determines which local heads are stale
to remote.c so it can be used by other builtins.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement the configuration skipFetchAll option to allow
certain remotes to be skipped when doing 'git fetch --all' and
'git remote update'. The existing skipDefaultUpdate variable
is still honored (by 'git fetch --all' and 'git remote update').
(If both are set in the configuration file with different values,
the value of the last occurrence will be used.)
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the --multiple option to specify that all arguments are either
groups or remotes. The primary reason for adding this option is
to allow us to re-implement 'git remote update' using fetch.
It would have been nice if this option was not needed, but since
the colon in a refspec is optional, it is in general not possible
to know whether a single, colon-less argument is a remote or a
refspec.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git remote' is meant for managing remotes and 'git fetch' is meant
for actually fetching data from remote repositories. Therefore, it is
not logical that you must use 'git remote update' to fetch from
more than one repository at once.
Add the --all option to 'git fetch', to tell it to attempt to fetch
from all remotes. Also, if --all is not given, the <repository>
argument is allowed to be the name of a group, to allow fetching
from all repositories in the group.
Other options except -v and -q are silently ignored.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This only changes the behavior of "git show-ref -h" without any
other options and arguments.
"show-ref -h" currently is short for "show-ref --head", which
shows all the refs/* and HEAD, as opposed to "show-ref" that
shows all the refs/* and not HEAD.
Does anybody use "show-ref -h"? It was in Linus's original, most
likely only because "it might be handy", not because "the command
should not show the HEAD by default for such and such reasons".
So I think it is okay if "show-ref -h" (but not "show-ref
--head") gives help and exits.
If a current script uses "git show-ref -h" without any other
arguments, it would have to be adapted by changing "-h" to
"--head".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change is strictly about 'git merge-ours -h' without
any other options and arguments.
This change cannot break compatibility since merge drivers are
always passed '--', among other arguments.
Any usage string for this command is a lie, since it ignored its
arguments until now. Still, it makes sense to let the user know
the expected usage when asked.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Treat an "-h" option as a request for help, rather than a "Not a
valid object name" error.
"commit-tree -h" could be asking to create a new commit from a
treeish named "-h". Strictly speaking, such a pathological ref
name is possible, but the user would have to had said something
like "tags/-h" to name such a pathological already. commit-tree
is usually used in scripts with raw object ids, anyway.
For consistency, the "-h" option uses its new meaning even if
followed by other arguments.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Treat an "-h" option as a request for help, rather than an
"Unknown commit -h" error.
"cherry -h" could be asking to compare histories that leads to
our HEAD and a commit that can be named as "-h". Strictly
speaking, that may be a valid refname, but the user would have to
say something like "tags/-h" to name such a pathological ref
already, so it is not such a big deal.
The "-h" option keeps its meaning even if preceded by other
options or followed by other arguments. This keeps the
command-line syntax closer to what parse_options would give and
supports shell aliases like 'alias cherry="git cherry -v"' a
little better.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarification: the following description only talks about "git
grep -h" without any other options and arguments.
Such a change cannot be breaking backward compatibility. "grep
-h" cannot be asking for suppressing filenames, as there is no
match pattern specified.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-fetch was builtin-ized, the previous script was moved to
contrib/examples. Now, it is the sole remaining user for
'git fetch--tool'.
The fetch--tool code is still worth keeping around so people can
try out the old git-fetch.sh, for example when investigating
regressions from the builtinifaction.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unfortunately at least one version of libcurl has a bug causing
it to include "Accept: */*" in the same POST request where we have
already asked for "Accept: application/x-git-upload-pack-response".
This is a bug in libcurl, not Git, or our test vector. The
application has explicitly asked the server for a single content
type, but libcurl has mistakenly also told the server the client
application will accept */*, which is any content type.
Based on the libcurl change log, this "Accept: */*" header bug
may have been fixed in version 7.18.1 released March 30, 2008:
http://curl.haxx.se/changes.html#7_18_1
Rather than require users to upgrade libcurl we change the test
vector to trim this line out of the 2nd request.
Reported-by: Tarmigan <tarmigan+git@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of libcurl report their output when GIT_CURL_VERBOSE
is set differently than other versions do. At least one variant
(version unknown but likely pre-7.18.1) reports the POST payload to
stderr, and omits the blank line after each HTTP request/response.
We clip these lines out of the stderr output now before doing the
compare, so we aren't surprised by this trivial difference.
Reported-by: Tarmigan <tarmigan+git@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eons ago HPA taught git-daemon how to protect itself from /../
attacks, which Junio brought back into service in d79374c7b5
("daemon.c and path.enter_repo(): revamp path validation").
I did not carry this into git-http-backend as originally we relied
only upon PATH_TRANSLATED, and assumed the HTTP server had done
its access control checks to validate the resolved path was within
a directory permitting access from the remote client. This would
usually be sufficient to protect a server from requests for its
/etc/passwd file by http://host/smart/../etc/passwd sorts of URLs.
However in 917adc0360 Mark Lodato added GIT_PROJECT_ROOT as an
additional method of configuring the CGI. When this environment
variable is used the web server does not generate the final access
path and therefore may blindly pass through "/../etc/passwd"
in PATH_INFO under the assumption that "/../" might have special
meaning to the invoked CGI.
Instead of permitting these sorts of malformed path requests, we
now reject them back at the client, with an error message for the
server log. This matches git-daemon behavior.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
http-backend: Fix symbol clash on AIX 5.3
Mike says:
> > +static void send_file(const char *the_type, const char *name)
> > +{
>
> I think a symbol clash here is responsible for a build breakage in
> next on AIX 5.3:
>
> CC http-backend.o
> http-backend.c:213: error: conflicting types for `send_file'
> /usr/include/sys/socket.h:676: error: previous declaration of `send_file'
> gmake: *** [http-backend.o] Error 1
So we rename the function send_local_file().
Reported-by: Mike Ralphson <mike.ralphson@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach gitweb how to produce nicer snapshot names by only using the
short hash id. If clients make requests using a tree-ish that is not
a partial or full SHA-1 hash, then the short hash will also be appended
to whatever they asked for. If clients request snapshot of a tag
(which means that $hash ('h') parameter has 'refs/tags/' prefix),
use only tag name.
Update tests cases in t9502-gitweb-standalone-parse-output.
Gitweb uses the following format for snapshot filenames:
<sanitized project name>-<version info>.<snapshot suffix>
where <sanitized project name> is project name with '.git' or '/.git'
suffix stripped, unless '.git' is the whole project name. For
snapshot prefix it uses:
<sanitized project name>-<version info>/
as compared to <sanitized project name>/ before (without version info).
Current rules for <version info>:
* if 'h' / $hash parameter is SHA-1 or shortened SHA-1, use SHA-1
shortened to to 7 characters
* otherwise if 'h' / $hash parameter is tag name (it begins with
'refs/tags/' prefix, use tag name (with 'refs/tags/' stripped
* otherwise if 'h' / $hash parameter starts with 'refs/heads/' prefix,
strip this prefix, convert '/' into '.', and append shortened SHA-1
after '-', i.e. use <sanitized hash>-<shortened sha1>
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add t9502-gitweb-standalone-parse-output test script, which runs
gitweb as a CGI script from the commandline and checks that it
produces the correct output.
Currently this test script contains only tests of snapshot naming
(proposed name of snapshot file) and snapshot prefix (prefix of files
in the archive / snapshot). It defines and uses 'tar' snapshot
format, without compression, for easy checking of snapshot prefix.
Testing is done using check_snapshot function.
Gitweb uses the following format for snapshot filenames:
<sanitized project name>-<hash parameter><snapshot suffix>
where <sanitized project name> is project name with '.git' or '/.git'
suffix stripped, unless '.git' is the whole project name. For
snapshot prefix it uses simply:
<sanitized project name>/
Disadvantages of current snapshot rules:
* There exists convention that <basename>.<suffix> archive unpacks to
<basename>/ directory (<basename>/ is prefix of archive). Gitweb
does not respect it
* Snapshot links generated by gitweb use full SHA-1 id as a value of
'h' / $hash parameter. With current rules it leads to long file
names like e.g. repo-1005c80cc11c531d327b12195027cbbb4ff9e3cb.tgz
* For handcrafted URLs, where 'h' / $hash parameter is a symbolic
'volatile' revision name such as "HEAD" or "next" snapshot name
doesn't tell us what exact version it was created from
* Proposed filename in Content-Disposition header should not contain
any directory path information, which means that it should not
contain '/' (see RFC2183)... which means that snapshot naming is
broken for $hash being e.g. hirearchical branch name such as
'xx/test'
This would be improved in next commit.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the NO_MMAP build variable is set, the msvc linker complains:
error LNK2001: unresolved external symbol _getpagesize
The msvc libraries do not define the getpagesize() function,
so we move the mingw_getpagesize() implementation from the
conditionally built win32mmap.c file to mingw.c.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Temporaries such as configure.ac+ and Documentation/*.xml+
sometimes remain after an interrupted build. Tell git not to
track them.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, format-patch would use its default stat
plus patch format only when no diff format was given on the
command line. This meant that "format-patch -p" would
suppress the stat and show just the patch.
Commit 68daa64 changed this to keep the stat format when we
had an "implicit" patch format, like "-U5". As a side
effect, this meant that an explicit patch format was now
ignored (because cmd_format_patch didn't know the reason
that the format was set way down in diff_opt_parse).
This patch unbreaks what 68daa64 did (while still preserving
what 68daa64 was trying to do), reinstating "-p" to suppress
the default behavior. We do this by parsing "-p" ourselves
in format-patch, and noting whether it was used explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was already the case for the old "diff --check" call, but the new
one that checks whether there are any non-ascii file names was missing
it, making that check fail for root commits.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"commit -s" used to add an empty line before adding S-o-b line only when
the last line of the existing log message is not another S-o-b line, but
c1e01b0 (commit: More generous accepting of RFC-2822 footer lines.,
2009-10-28) introduced logic to omit this empty line when the message ends
with a run of "footer" lines, to cover S-o-b's friends, e.g. Acked-by.
However, the logic was overzealous and missed one corner case. A message
that consists of a single line that begins with Token + colon, it can be
mistaken as a S-o-b's friend. We do want an empty line in such a case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A tree-wide bikeshedding to replace "fast forward" into "fast-forward" is
in 'master'. Since we want to keep this "test modernization" series
mergeable also to the maintenance track, we would need to tweak the test
to accept both old spellings and new spellings.
Sigh... This kind of headache is the primary reason we try not to allow
such a tree-wide bike-shedding, but the damage has already been done.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using bare "cmp", use "test_cmp". Output when the test is run
with a -v option becomes easier to diagnose when something goes wrong
because on saner platforms test_cmp uses "diff -u".
There is no need to put an extra backslash to a line that ends with a '|'
(i.e. the upstream of a pipe).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were some differences between t1200 and the gitcore-tutorial. Add
missing tests for manually merging two branches, and use the same
commands in both files.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many parts of the tests in t1200 are run outside the test harness,
circumventing the usefulness of -v and spewing messages to stdout when
-v isn't used. Fix these problems by modernizing the test a bit.
An extra test_done has existed since commit 6a74642 (git-commit --amend:
two fixes., 2006-04-20) leading to the last 6 tests never being run.
Remove it and teach the resolve merge test about fast-forward merges.
Also fix the last test's incorrect find command and prune before
checking for unpacked objects so we remove the unreachable conflict-marked
blob.
Finally, we remove the TODO notes, because fetch, push, and clone have
their own tests since t1200 was introduced and we're not going to add
them here 4 years later.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In pathinfo mode, we use <base href> that refers to the base location
of gitweb in order for various external media links to work well.
However, this means that for the page to refer to itself, it must
regenerate full link, and this is exactly what the blob view page
did not do for line numbers.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's keep thread stuff close together if possible. And in this case,
this even reduces the #ifdef noise, and allows for skipping the
autodetection altogether if delta search is not needed (like with a pure
clone).
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test the major configuration settings which control access to
the repository:
http.getanyfile
http.uploadpack
http.receivepack
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some repository owners may wish to enable smart HTTP, but disallow
dumb content serving. Disallowing dumb serving might be because
the owners want to rely upon reachability to control which objects
clients may access from the repository, or they just want to
encourage clients to use the more bandwidth efficient transport.
If http.getanyfile is set to false the backend CGI will return with
'403 Forbidden' when an object file is accessed by a dumb client.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The top level directory "/smart/" of the test Apache server is mapped
through our git-http-backend CGI, but uses the same underlying
repository space as the server's document root. This is the most
simple installation possible.
Server logs are checked to verify the client has accessed only the
smart URLs during the test. During fetch testing the headers are
also logged from libcurl to ensure we are making a reasonably sane
HTTP request, and getting back reasonably sane response headers
from the CGI.
When validating the request headers used during smart fetch we munge
away the actual Content-Length and replace it with the placeholder
"xxx". This avoids unnecessary varability in the test caused by
an unrelated change in the requested capabilities in the first want
line of the request. However, we still want to look for and verify
that Content-Length was used, because smaller payloads should be
using Content-Length and not "Transfer-Encoding: chunked".
When validating the server response headers we must discard both
Content-Length and Transfer-Encoding, as Apache2 can use either
format to return our response.
During development of this test I observed Apache returning both
forms, depending on when the processes got CPU time. If our CGI
returned the pack data quickly, Apache just buffered the whole
thing and returned a Content-Length. If our CGI took just a bit
too long to complete, Apache flushed its buffer and instead used
"Transfer-Encoding: chunked".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To clarify what part of the HTTP transprot is being tested we change
the URLs used by existing tests to include /dumb/ at the start,
indicating they use the non-Git aware code paths.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If LIB_HTTPD_PORT is not set already, lib-httpd will set it to the
default 8111.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The upload-pack requests are mostly plain text and they compress
rather well. Deflating them with Content-Encoding: gzip can easily
drop the size of the request by 50%, reducing the amount of data
to transfer as we negotiate the common commits.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-remote-curl backend detects if the remote server supports
the git-upload-pack service, and if so, runs git-fetch-pack locally
in a pipe to generate the want/have commands.
The advertisements from the server that were obtained during the
discovery are passed into git-fetch-pack before the POST request
starts, permitting server capability discovery and enablement.
Common objects that are discovered are appended onto the request as
have lines and are sent again on the next request. This allows the
remote side to reinitialize its in-memory list of common objects
during the next request.
Because all requests are relatively short, below git-remote-curl's
1 MiB buffer limit, requests will use the standard Content-Length
header and be valid HTTP/1.0 POST requests. This makes the fetch
client more tolerant of proxy servers which don't support HTTP/1.1
or the chunked transfer encoding.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-remote-curl backend detects if the remote server supports
the git-receive-pack service, and if so, runs git-send-pack in a
pipe to dump the command and pack data as a single POST request.
The advertisements from the server that were obtained during the
discovery are passed into git-send-pack before the POST request
starts. This permits git-send-pack to operate largely unmodified.
For smaller packs (those under 1 MiB) a HTTP/1.0 POST with a
Content-Length is used, permitting interaction with any server.
The 1 MiB limit is arbitrary, but is sufficent to fit most deltas
created by human authors against text sources with the occasional
small binary file (e.g. few KiB icon image). The configuration
option http.postBuffer can be used to increase (or shink) this
buffer if the default is not sufficient.
For larger packs which cannot be spooled entirely into the helper's
memory space (due to http.postBuffer being too small), the POST
request requires HTTP/1.1 and sets "Transfer-Encoding: chunked".
This permits the client to upload an unknown amount of data in one
HTTP transaction without needing to pregenerate the entire pack
file locally.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of loading the cached info/refs, try to use the smart HTTP
version when the server supports it. Since the smart variant is
actually the pkt-line stream from the start of either upload-pack
or receive-pack we need to parse these through get_remote_heads,
which requires a background thread to feed its pipe.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the git-http-backend examples, only match git-receive-pack within
/git/.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the git-http-backend documentation, add an example of how to set up
gitweb and git-http-backend on the same URL by using a series of
mod_alias commands.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the git-http-backend documentation, use mod_alias exlusively, instead
of using a combination of mod_alias and mod_rewrite. This makes the
example slightly shorted and a bit more clear.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify some of the git-http-backend documentation, particularly:
* In the Description, state that smart/dumb HTTP fetch and smart HTTP
push are supported, state that authenticated clients allow push, and
remove the note that this is only suited for read-only updates.
* At the start of Examples, state explicitly what URL is mapping to what
location on disk.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new environment variable, GIT_PROJECT_ROOT, to override the
method of using PATH_TRANSLATED to find the git repository on disk.
This makes it much easier to configure the web server, especially when
the web server's DocumentRoot does not contain the git repositories,
which is the usual case.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Requests for $GIT_URL/git-receive-pack and $GIT_URL/git-upload-pack
are forwarded to the corresponding backend process by directly
executing it and leaving stdin and stdout connected to the invoking
web server. Prior to starting the backend process the HTTP response
headers are sent, thereby freeing the backend from needing to know
about the HTTP protocol.
Requests that are encoded with Content-Encoding: gzip are
automatically inflated before being streamed into the backend.
This is primarily useful for the git-upload-pack backend, which
receives highly repetitive text data from clients that easily
compresses to 50% of its original size.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --stateless-rpc is passed as a command line parameter to
upload-pack or receive-pack the programs now assume they may
perform only a single read-write cycle with stdin and stdout.
This fits with the HTTP POST request processing model where a
program may read the request, write a response, and must exit.
When --advertise-refs is passed as a command line parameter only
the initial ref advertisement is output, and the program exits
immediately. This fits with the HTTP GET request model, where
no request content is received but a response must be produced.
HTTP headers and/or environment are not processed here, but
instead are assumed to be handled by the program invoking
either service backend.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-http-backend CGI can be configured into any Apache server
using ScriptAlias, such as with the following configuration:
LoadModule cgi_module /usr/libexec/apache2/mod_cgi.so
LoadModule alias_module /usr/libexec/apache2/mod_alias.so
ScriptAlias /git/ /usr/libexec/git-core/git-http-backend/
Repositories are accessed via the translated PATH_INFO.
The CGI is backwards compatible with the dumb client, allowing all
older HTTP clients to continue to download repositories which are
managed by the CGI.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we use -c, -C, or --amend, we are trying one of two things: using the
source as a template or modifying a commit with corrections.
When these options are used, the authorship and timestamp recorded in the
newly created commit are always taken from the original commit. This is
inconvenient when we just want to borrow the commit log message or when
our change to the code is so significant that we should take over the
authorship (with the blame for bugs we introduce, of course).
The new --reset-author option is meant to solve this need by regenerating
the timestamp and setting the committer as the new author.
Signed-off-by: Erick Mattos <erick.mattos@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduced in 492cf3f (More precise description of 'git describe --abbrev', 2009-10-29)
Signed-off-by: Gisle Aas <gisle@aas.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new GIT_PARSE_WITH_SET_MAKE_VAR macro to allow configuration
settings for ETC_GITCONFIG, DEFAULT_PAGER and DEFAULT_EDITOR.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add macro GIT_PARSE_WITH_SET_MAKE_VAR to configure.ac to allow --with
style options that set values for variables used during the make
process.
Arguments are the $name part of --with-$name, the name of
the variable to set in the Makefile (config.mak.autogen) and
the help text for the option.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's okay to use the curl helper without a local repository, so long
as you don't use "fetch". There aren't any git programs that would try
to use it, and it doesn't make sense to try it (since there's nowhere
to write the results), but we may as well be clear.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_ls_remote() was calling transport_get() with a NULL remote and a
non-NULL url in the case where it was run outside a git
repository. This involved a bunch of ill-tested special
cases. Instead, simply get the struct remote for the URL with
remote_get(), which works fine outside a git repository, and can also
take global options into account.
This fixes a tiny and obscure bug where "git ls-remote" without a repo
didn't support global url.*.insteadOf, even though "git clone" and
"git ls-remote" in any repo did.
Also, enforce that all callers provide a struct remote to transport_get().
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check the required Tcl version number before we setup msgcat for
language translation. If the Tcl version is too old just display the
untranslated error text.
The caller of show_error can now pass an alternative function for mc.
The Tcl list function turns the translation into a no-op.
This fixes the error:
Error in startup script: invalid command name "mc"
when attempting to start gitk with Tcl 8.3.
Tested with both Tcl 8.3 and 8.4.
Signed-off-by: Bernt Hansen <bernt@norang.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
When displaying diffs in a submodule, this makes gitk display the
headlines of the commits being diffed, instead of just showing
not-quite-helpful SHA-1 pairs, if the underlying git installation
supports this. That makes it much easier to evaluate the changes, as
it eliminates the need to start a gitk inside the submodule and use
the superprojects hashes there to find out what the commits are about.
Since the --submodule option of git diff is new in git version 1.6.6,
this only uses the --submodule option when a git version of 1.6.6 or
higher is detected.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
When highlighting a commit, using the context menu over the staged changes
and then selecting "Diff this -> selected" the diff was empty. The same
happened when highlighting the staged changes and using "Diff selected ->
this" over a commit. The reason was a copy/paste error in [diffcmd].
This fixes it.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This adds an option to control the global colour scheme in the
Edit > Preferences dialog so that the whole interface can have
a non-default main colour.
Signed-off-by: Guillermo S. Romero <gsromero@infernal-iceberg.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Starting with commit 51ea55190b,
git-compat-util.h includes compat/bswap.h
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The openssl/CHANGES file says:
Let the TLSv1_method() etc. functions return a 'const' SSL_METHOD
pointer and make the SSL_METHOD parameter in SSL_CTX_new,
SSL_CTX_set_ssl_version and SSL_set_ssl_method 'const'.
In older versions, unqualified pointers were used, so we unfortunately
cannot unconditionally update the type of the variable we use.
Signed-off-by: Vietor Liu <vietor@vxwo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we introduced the "word diff" mode, we could have done one of three
things:
* change fn_out_consume() to "this is called every time a line worth of
diff becomes ready from the lower-level diff routine. This function
knows two sets of helpers (one for line-oriented diff, another for word
diff), and each set has various functions to be called at certain
places (e.g. hunk header, context, ...). The function's role is to
inspect the incoming line, and dispatch appropriate helpers to produce
either line- or word- oriented diff output."
* introduce fn_out_consume_word_diff() that is "this is called every time
a line worth of diff becomes ready from the lower-level diff routine,
and here is what we do to prepare word oriented diff using that line."
without touching fn_out_consume() at all.
* Do neither of the above, and keep fn_out_consume() to "this is called
every time a line worth of diff becomes ready from the lower-level diff
routine, and here is what we do to output line oriented diff using that
line." but sprinkle a handful of 'are we in word-diff mode? if so do
this totally different thing' at random places.
This patch is to at least abstract the details of "this totally different
thing" out from the main codepath, in order to improve readability.
We can later refactor it by introducing fn_out_consume_word_diff(), taking
the second route above, but that is a separate topic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 0cc5691a8b.
There is not enough justification for doing this. We do not update
things in .git/branches and .git/remotes anymore, but still do read
information from there and will keep doing so.
Besides, this breaks quite a lot of tests in t55?? series.
* ja/fetch-doc:
Documentation/merge-options.txt: order options in alphabetical groups
Documentation/git-pull.txt: Add subtitles above included option files
Documentation/fetch-options.txt: order options alphabetically
The remote helper interface now supports the push capability,
which can be used to ask the implementation to push one or more
specs to the remote repository. For remote-curl we implement this
by calling the existing WebDAV based git-http-push executable.
Internally the helper interface uses the push_refs transport hook
so that the complexity of the refspec parsing and matching can be
reused between remote implementations. When possible however the
helper protocol uses source ref name rather than the source SHA-1,
thereby allowing the helper to access this name if it is useful.
>From Clemens Buchacher <drizzd@aon.at>:
update http tests according to remote-curl capabilities
o Pushing packed refs is now fixed.
o The transport helper fails if refs are already up-to-date. Add
a test for that.
o The transport helper will notice if refs are already
up-to-date. We therefore need to update server info in the
unpacked-refs test.
o The transport helper will purge deleted branches automatically.
o Use a variable ($ORIG_HEAD) instead of full SHA-1 name.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
CC: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some transports, like the native pack transport implemented by
fetch-pack, support useful features like depth or include tags.
These should be exposed if the underlying helper knows how to
use them.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some network protocols (e.g. native git://) are able to fetch more
than one ref at a time and reduce the overall transfer cost by
combining the requests into a single exchange. Instead of feeding
each fetch request one at a time to the helper, feed all of them
at once so the helper can decide whether or not it should batch them.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helpers might want a higher level of verbosity than just +1 (the
porcelain default setting) and +2 (-v -v). Expand the field to
allow verbosity in the range -1..3.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will need the walker, url and remote in other functions as the
code grows larger to support smart HTTP. Extract this out into a
set of globals we can easily reference once configured.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When multi_ack_detailed is enabled the ACK continue messages returned
by the remote upload-pack are broken out to describe the different
states within the peer. This permits the client to better understand
the server's in-memory state.
The fetch-pack/upload-pack protocol now looks like:
NAK
---------------------------------
Always sent in response to "done" if there was no common base
selected from the "have" lines (or no have lines were sent).
* no multi_ack or multi_ack_detailed:
Sent when the client has sent a pkt-line flush ("0000") and
the server has not yet found a common base object.
* either multi_ack or multi_ack_detailed:
Always sent in response to a pkt-line flush.
ACK %s
-----------------------------------
* no multi_ack or multi_ack_detailed:
Sent in response to "have" when the object exists on the remote
side and is therefore an object in common between the peers.
The argument is the SHA-1 of the common object.
* either multi_ack or multi_ack_detailed:
Sent in response to "done" if there are common objects.
The argument is the last SHA-1 determined to be common.
ACK %s continue
-----------------------------------
* multi_ack only:
Sent in response to "have".
The remote side wants the client to consider this object as
common, and immediately stop transmitting additional "have"
lines for objects that are reachable from it. The reason
the client should stop is not given, but is one of the two
cases below available under multi_ack_detailed.
ACK %s common
-----------------------------------
* multi_ack_detailed only:
Sent in response to "have". Both sides have this object.
Like with "ACK %s continue" above the client should stop
sending have lines reachable for objects from the argument.
ACK %s ready
-----------------------------------
* multi_ack_detailed only:
Sent in response to "have".
The client should stop transmitting objects which are reachable
from the argument, and send "done" soon to get the objects.
If the remote side has the specified object, it should
first send an "ACK %s common" message prior to sending
"ACK %s ready".
Clients may still submit additional "have" lines if there are
more side branches for the client to explore that might be added
to the common set and reduce the number of objects to transfer.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 41cb7488 Linus moved this function to connect.c for reuse inside
of the git-clone-pack command. That was 2005, but in 2006 Junio
retired git-clone-pack in commit efc7fa53. Since then the only
caller has been fetch-pack. Since this ACK/NAK exchange is only
used by the fetch-pack/upload-pack protocol we should move it back
to be a private detail of fetch-pack.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change is being offered as a refactoring to make later
commits in the smart HTTP series easier.
By changing the enabled capabilities to be formatted in a strbuf
it is easier to add a new capability to the set of supported
capabilities.
By formatting the want portion of the request into a strbuf and
writing it as a whole block we can later decide to hold onto
the req_buf (instead of releasing it) to recycle in stateless
communications.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is an error parsing the 4 byte length component we now
display it as part of the die message, this may hint as to what
data was misunderstood by the application.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These routines help to work with pkt-line values inside of a strbuf,
permitting simple formatting of buffered network messages.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check that http.c::finish_http_pack_request() returns 0 (for success).
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass the editor name to the shell if it contains any susv3 shell
special character (globs, redirections, variable substitutions,
escapes, etc). This way, the meaning of some characters will not
meaninglessly change when others are added, and git commands
implemented in C and in shell scripts will interpret editor names
in the same way.
This does not make the GIT_EDITOR setting any more expressive,
since one could always use single quotes to force the editor to
be passed to the shell.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Save HTTP headers into gitweb.headers, and the body of message into
gitweb.body in gitweb_run()
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For convenience in scripts and aliases, add the option
--ff-only to only allow fast-forwards (and up-to-date,
despite the name).
Disallow combining --ff-only and --no-ff, since they
flatly contradict each other.
Allow all other options to be combined with --ff-only
(i.e. do not add any code to handle them specially),
including the following options:
* --strategy (one or more): As long as the chosen merge
strategy results in up-to-date or fast-forward, the
command will succeed.
* --squash: I cannot imagine why anyone would want to
squash commits only if fast-forward is possible, but I
also see no reason why it should not be allowed.
* --message: The message will always be ignored, but I see
no need to explicitly disallow providing a redundant message.
Acknowledgements: I did look at Yuval Kogman's earlier
patch (107768 in gmane), mainly as shortcut to find my
way in the code, but I did not copy anything directly.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If git clone is given more than two non-option arguments, it
silently throws away all but the first one. Complain instead.
Discovered by comparing the new builtin clone to the old
git-clone.sh.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix incorrect description of --recursive, and stop listing the historical
synonym --naked that is not advertised anywhere.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because --root can put our trash directories elsewhere,
using ".." may not always work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
so that they can be run individually as
(cd t && ./t9150-svk-mergetickets.sh)
etc. just like all other test scripts.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also adds a note about why the output in the examples might give
different output today.
Signed-off-by: Gisle Aas <gisle@aas.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b5227d8 changed the behavior of "ls-files" with
respect to includes, but accidentally broke the "-i" option
The original behavior was:
1. if no "-i" is given, cull all results according to --exclude*
2. if "-i" is given, show the inverse of (1)
The broken behavior was:
1. if no "-i" is given:
a. for "-o", cull results according to --exclude*
b. for index files, always show all
2. if "-i" is given:
a. for "-o", shows the inverse of (1a)
b. for index files, always show all
The fixed behavior keeps the new (1b) behavior introduced
by b5227d8, but fixes the (2b) behavior to show only ignored
files, not all files.
This patch also tweaks the documentation. The original text
was somewhat obscure in the first place, but it is also now
inaccurate (the relationship between (1b) and (2b) is not
quite a "reverse").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git itself does not even look at this directory. Any tools that
actually needs it should create it itself.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Colored word diff without context lines firstly printed all the hunk
headers among each other and then printed the diff.
This was due to the code relying on getting at least one context line at
the end of each hunk, where the colored words would be flushed (it is
done that way to be able to ignore rewrapped lines).
Noticed by Markus Heidelberg.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of having all PDB files for all projects named "vc90.pdb", name them
after the respective project to make the relation more clear (and to avoid name
clashes when copying files around).
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Acked-by: Marius Storm-Olsen <mstormo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When compiling with MSVC on x86-compatible, use an intrinsic for byte swapping.
In contrast to the GCC path, we do not prefer inline assembly here as it is not
supported for the x64 platform.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add p4merge to the set of built-in diff/merge tools, and update
bash completion and documentation.
Signed-off-by: Scott Chacon <schacon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users seem to call git-describe without reading the manpage, and then
wonder why it doesn't work with unannotated tags by default.
Make a minimal effort towards seeing if there would have been
unannotated tags, and tell the user. Specifically, we say that --tags
could work if we found any unannotated tags. If not, we say that
--always would have given results.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I personally use "git bisect visualize" all the time when I bisect, but it
turns out that that is not a very flexible model. Sometimes I want to do
bisection based on all commits (no pathname limiting), but then visualize
the current bisection tree with just a few pathnames because I _suspect_
those pathnames are involved in the problem but am not totally sure about
them.
And at other times, I want to use other revision parsing logic, none of
which is available with "git bisect visualize".
So this adds "--bisect" as a revision parsing argument, and as a result it
just works with all the normal logging tools. So now I can just do
gitk --bisect --simplify-by-decoration filename-here
etc.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
help -a: do not unnecessarily look for a repository
Do not try to remove directories when removing old links
rebase -i: more graceful handling of invalid commands
help -i: properly error out if no info viewer can be found
'git commit -s' will insert a blank line before the Signed-off-by
line at the end of the message, unless this last line is a
Signed-off-by line itself. Common use has other trailing lines
at the ends of commit text, in the style of RFC2822 headers.
Be more generous in considering lines to be part of this footer.
If the last paragraph of the commit message reasonably resembles
RFC-2822 formatted lines, don't insert that blank line.
The new Signed-off-by line is still only suppressed when the
author's existing Signed-off-by is the last line of the message.
Signed-off-by: David Brown <davidb@quicinc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So complete refs, files after the double-dash and some diff options that
make sense for difftool.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although 'git help -a' actually doesn't need to be run inside a git
repository and uses no repository-specific information, it looks for a git
directory. On 'git <TAB><TAB>' the bash completion runs 'git help -a' and
unnecessary searching for a git directory can be annoying in auto-mount
environments. With this commit, 'git help' no longer searches for a
repository when run with the -a option.
Reported by Vincent Danjean through http://bugs.debian.org/539273
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complete all long options for 'git rebase' except --no-verify
(probably used very seldom) and the long options corresponding
to -v, -q, and -f.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When building Git with MSVC on Windows, directories named after the Git alias
are created for the output files, e.g. there is a "git-merge-index" directory
next to the "git-merge-index.exe" executable in the build root. Previously,
"make all" just checked if "git-merge-index" and "git-merge-index.exe" are the
same file, and if not, tried to remove "git-merge-index". This fails in the
case of "git-merge-index" being a directory, which is why this is checked now.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there are large numbers of refs, calling read_ref for each ref is
inefficent (and infact downright slow) - so instead use for_each_ref
to build up a string list of all the refs that we currently have,
which significantly improves the volume.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref_remove_duplicates function was very slow at dealing with very
large numbers of refs. This is because it was using a linear search
through all remaining refs to find any duplicates of the current ref.
Rewriting it to use a string list to keep track of which refs have
already been seen and removing duplicates when they are found is much
more efficient.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually we show deletion as a big hunk deleting all of the
file's text. However, for files with no content, the diff
shows just the 'deleted file mode ...' line. This patch
cause "add -p" (and related commands) to recognize that line
and explicitly ask about deleting the file.
We only add the "stage this deletion" hunk for empty files,
since other files will already ask about the big content
deletion hunk. We could also change those files to simply
display "stage this deletion", but showing the actual
deleted content is probably what an interactive user wants.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when there is an invalid command, the rest of the line is
still treated as if the command had been valid, i.e. rebase -i attempts
to produce a patch, using the next argument as a SHA1 name. If there is
no next argument or an invalid one, very confusing error messages
appear (the line was '.'; path to git-rebase-todo substituted):
Unknown command: .
fatal: ambiguous argument 'Please fix this in the file $somefile.':
unknown revision or path not in the working tree.
Use '--' to separate paths from revisions
fatal: Not a valid object name Please fix this in the file $somefile.
fatal: bad revision 'Please fix this in the file $somefile.'
Instead, verify the validity of the remaining line and error out earlier
if necessary.
Signed-off-by: Jan Krüger <jk@jk.gs>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this commit, git help -i <cmd> prints an error message and exits
non-zero instead of being silent and exit code 0.
Reported by Trent W. Buck through
http://bugs.debian.org/537664
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our gitignore doesn't use a preceding "/" to root its
patterns in the top of the repository. This means that if
you add a file or directory called "git" (for example)
inside a subdirectory, it will be erroneously ignored.
This patch was done mechanically with "s/^[^*]/\/&/" with
one exception: instead of ignoring gitk-wish, we should
gitk-git/gitk-wish (arguably, this should be done in
gitk-git/.gitignore, but because that is a subtree merge
from elsewhere, this is easier).
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.bogomips.org/git-svn:
git-svn: convert SVN 1.5+ / svnmerge.py svn:mergeinfo props to parents
git-svn: add test data for SVN 1.5+ merge, with script.
git-svn: convert SVK merge tickets to extra parents
git-svn: allow test setup script to support PERL env. var
git-svn: add test data for SVK merge, with script.
git svn: fix fetch where glob is on the top-level URL
* git://repo.or.cz/git-gui:
git-gui: adjust the minimum height of diff pane for shorter screen height
git-gui: fix use of uninitialized variable
git-gui: store wm state and fix wm geometry
git-gui: Ensure submodule path is quoted properly
git-gui: fix diff for partially staged submodule changes
git-gui: Update russian translation
git-gui: Limit display to a maximum number of files
git-gui: remove warning when deleting correctly merged remote branch
git-gui: Added Greek translation & glossary
git-gui: display summary when showing diff of a submodule
With the --dirty option, git describe works on HEAD but append s"-dirty"
iff the contents of the work tree differs from HEAD. E.g.
$ git describe --dirty
v1.6.5-15-gc274db7
$ echo >> Makefile
$ git describe --dirty
v1.6.5-15-gc274db7-dirty
The --dirty option can also be used to specify what is appended, instead
of the default string "-dirty".
$ git describe --dirty=.mod
v1.6.5-15-gc274db7.mod
Many build scripts use `git describe` to produce a version number based on
the description of HEAD (on which the work tree is based) + saying that if
the build contains uncommitted changes. This patch helps the writing of
such scripts since `git describe --dirty` does directly the intended thing.
Three possiblities were considered while discussing this new feature:
1. Describe the work tree by default and describe HEAD only if "HEAD" is
explicitly specified
Pro: does the right thing by default (both for users and for scripts)
Pro: other git commands that works on the work tree by default
Con: breaks existing scripts used by the Linux kernel and other projects
2. Use --worktree instead of --dirty
Pro: does what it says: "git describe --worktree" describes the work tree
Con: other commands do not require a --worktree option when working
on the work tree (it often is the default mode for them)
Con: unusable with an optional value: "git describe --worktree=.mod"
is quite unintuitive.
3. Use --dirty as in this patch
Pro: makes sense to specify an optional value (what the dirty mark is)
Pro: does not have any of the big cons of previous alternatives
* does not break scripts
* is not inconsistent with other git commands
This patch takes the third approach.
Signed-off-by: Jean Privat <jean@pryen.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the main window is maximized, if the screen height is shorter (e.g.
Netbook screen 1024x600), both the partial commit pane and the status bar
are hidden. The diff pane is resizable, so that it can use less vertical
height, allowing the overall window to be shorter and still display both
the entire commit pane and status bar.
Signed-off-by: Vietor Liu <vietor@vxwo.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This feature is long overdue; convert SVN's merge representation to git's
as revisions are imported. This works by converting the list of revisions
in each line of the svn:mergeinfo into git revision ranges, and then
checking the latest of each of these revision ranges for A) being new and
B) now being completely merged.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Dump generated with SVN 1.5.1 (on lenny amd64). This test
should hopefully cover all but a few intermediate versions of
the svnmerge.py script.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
SVK is a simple case to start with, as its idea of merge parents
matches git's one. When a svk:merge ticket is encountered, check each
of the listed merged revisions to see if they are in the history of
this commit; if not, then we have encountered a merge - record it.
[ew: minor formatting cleanups]
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
Possibly the 'perl' in the PATH is not the one to be used for the tests;
let PERL set in the environment select it.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Acked-by: Eric Wong <normalperson@yhbt.net>
In cases where the top-level URL we're tracking is the path we
glob against, we can once again track odd repositories that keep
branches/tags at the top level. This regression was introduced
in commit 6f5748e14c.
Thanks to Daniel Cordero for the original bug report and
bisection.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This is needed because we want to use the
advice.pushnonfastforward variable.
Previously, we would load the config on demand only when we
needed to look at push.default. Which meant that "git push"
would load it, but "git push remote" would not, leading to
differing behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/receive-pack-auto:
receive-pack: run "gc --auto --quiet" and optionally "update-server-info"
gc --auto --quiet: make the notice a bit less verboase
GIT_DIFFTOOL_PROMPT doesn't have any effect if overridden with --prompt.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first argument of the tar command is interpreted as a bundle of
letters specifying the mode of operation and additional options, with
any option arguments taken from subsequent words on the command line
as needed. The implementation of tar in busybox treats this bundle
as if preceded by a dash and then parses it by getopt rules, which
mishandles 'tar xfo -'. Use 'tar xof -' instead to work this around.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Copied from the submodule summary test and changed to reflect the
differences in the output of git diff --submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a regression introduce by d68dc34 (git-describe: Die early if
there are no possible descriptions, 2009-08-06).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since NO_OPENSSL is no longer defined on Windows, BLK_SHA1 is not defined
anymore implicitly. Define it explicitly.
As a nice side-effect, we no longer link against libcrypto.dll, which has
non-trivial startup costs because it depends on 6 otherwise unneeded
DLLs.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't use crypto, but rather require libeay32 and
ssleay32. handle it in both the Makefile msvc linker
script, and the buildsystem generator.
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we have OpenSSL in msysgit now, enable it to support SSL
encryption for imap-send.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I always considered line wrapping to be more similar to a colour, i.e. a
state that one can change and that is applied to all following text until
the next state change, except that it's always reset at the end of the
format string.
Here's a patch to implement this behaviour, using Dscho's
strbuf_add_wrapped_text()
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a zero or negative width is given to "shortlog -w<width>,<in1>,<in2>"
and --format=%[wrap(w,in1,in2)...%], just indent the text by in1 without
wrapping.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The docbook/xmlto toolchain insists on quoting ' as \'. This does
achieve the quoting goal, but modern 'man' implementations turn the
apostrophe into a unicode "proper" apostrophe (given the right
circumstances), breaking code examples in many of our manpages.
Quote them as \(aq instead, which is an "apostrophe quote" as per the
groff_char manpage.
Unfortunately, as Anders Kaseorg kindly pointed out, this is not
portable beyond groff, so we add an extra Makefile variable GNU_ROFF
which you need to enable to get the new quoting.
Thanks also to Miklos Vajna for documentation.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The loop in get_size_from_delta() feeds a deflated delta data from the
pack stream _until_ we get inflated result of 20 bytes[*] or we reach the
end of stream.
Side note. This magic number 20 does not have anything to do with the
size of the hash we use, but comes from 1a3b55c (reduce delta head
inflated size, 2006-10-18).
The loop reads like this:
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
curpos += stream.next_in - in;
} while ((st == Z_OK || st == Z_BUF_ERROR) &&
stream.total_out < sizeof(delta_head));
This git_inflate() can return:
- Z_STREAM_END, if use_pack() fed it enough input and the delta itself
was smaller than 20 bytes;
- Z_OK, when some progress has been made;
- Z_BUF_ERROR, if no progress is possible, because we either ran out of
input (due to corrupt pack), or we ran out of output before we saw the
end of the stream.
The fix b3118bd (sha1_file: Fix infinite loop when pack is corrupted,
2009-10-14) attempted was against a corruption that appears to be a valid
stream that produces a result larger than the output buffer, but we are
not even trying to read the stream to the end in this loop. If avail_out
becomes zero, total_out will be the same as sizeof(delta_head) so the loop
will terminate without the "fix". There is no fix from b3118bd needed for
this loop, in other words.
The loop in unpack_compressed_entry() is quite a different story. It
feeds a deflated stream (either delta or base) and allows the stream to
produce output up to what we expect but no more.
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
curpos += stream.next_in - in;
} while (st == Z_OK || st == Z_BUF_ERROR)
This _does_ risk falling into an endless interation, as we can exhaust
avail_out if the length we expect is smaller than what the stream wants to
produce (due to pack corruption). In such a case, avail_out will become
zero and inflate() will return Z_BUF_ERROR, while avail_in may (or may
not) be zero.
But this is not a right fix:
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
+ if (st == Z_BUF_ERROR && (stream.avail_in || !stream.avail_out)
+ break; /* wants more input??? */
curpos += stream.next_in - in;
} while (st == Z_OK || st == Z_BUF_ERROR)
as Z_BUF_ERROR from inflate() may be telling us that avail_in has also run
out before reading the end of stream marker. In such a case, both avail_in
and avail_out would be zero, and the loop should iterate to allow the end
of stream marker to be seen by inflate from the input stream.
The right fix for this loop is likely to be to increment the initial
avail_out by one (we allocate one extra byte to terminate it with NUL
anyway, so there is no risk to overrun the buffer), and break out if we
see that avail_out has become zero, in order to detect that the stream
wants to produce more than what we expect. After the loop, we have a
check that exactly tests this condition:
if ((st != Z_STREAM_END) || stream.total_out != size) {
free(buffer);
return NULL;
}
So here is a patch (without my previous botched attempts) to fix this
issue. The first hunk reverts the corresponding hunk from b3118bd, and
the second hunk is the same fix proposed earlier.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is convenient when parsing multiple the blame of multiple files,
for example:
git ls-files -z --exclude-standard -- "*.[ch]" |
xargs --null -n 1 git blame -p > output
and then analyzing the 'output' file using a seperate script.
Currently the parsing is difficult when not all files have a newline
at EOF, this patch ensures that even such files have a newline at the
end of the blame output.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
CC: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the missing definite article ("the") in several places.
Change "note to..." to "note for...", since "note to" means that
that the note is addressed to someone (source: Google search).
Change "progressbar" to "progress bar" (source: Wikipedia).
Format git commands, options, and file names consistently using
back quotes (i.e. a fixed font in the resulting HTML document).
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also handle the extensions .tlz and .txz, aliases for .tar.lzma and
.tar.xz respectively.
Signed-off-by: Ingmar Vanhassel <ingmar@exherbo.org>
Liked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce two new configuration variables, receive.autogc (defaults to
true) and receive.updateserverinfo (defaults to false). When these are
set, receive-pack runs "gc --auto --quiet" and "update-server-info"
respectively after it finishes receiving data from "git push" and updating
refs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
When "gc --auto --quiet" decides there is something to do, it tells the
user what it is doing, as it is going to make the user wait for a bit.
But the message was a bit too long.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Porcelains may want to make sure their calls to "git checkout" will
reliably fail regardless of the presense of random remote tracking
branches by the new DWIMmery introduced.
Luckily all existing in-tree callers have extra checks to make sure they
feed local branch name when they want to switch, or they explicitly ask to
detach HEAD at the given commit, so there is no need to add this option
for them.
As this is strictly script-only option, do not even bother to document it,
and do bother to hide it from "git checkout -h".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git pull" documentation has examples which follow an outdated
style. Update the examples to use "git merge" where appropriate and
move the examples to the corresponding manpages.
Furthermore,
- show that pull is equivalent to fetch and merge, which is still a
frequently asked question,
- explain the default fetch refspec.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This enables gitk to show the patch text with correct glyphs if the locale
is not UTF-8.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mbox file must have been added by accident in e9fe804 (git-mailinfo:
Fix getting the subject from the in-body [PATCH] line, 2008-07-14).
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus and other git developers from the early days trained their fingers
to type the command, every once in a while even without thinking, to check
the consistency of the repository back when the lower core part of the git
was still being developed. Developers who wanted to make sure that git
correctly dealt with packfiles could deliberately trigger their creation
and checked them after they were created carefully, but loose objects are
the ones that are written by various commands from random codepaths. It
made some technical sense to have a mode that checked only loose objects
from the debugging point of view for that reason.
Even for git developers, there no longer is any reason to type "git fsck"
every five minutes these days, worried that some newly created objects
might be corrupt due to recent change to git.
The reason we did not make "--full" the default is probably we trust our
filesystems a bit too much. At least, we trusted filesystems more than we
trusted the lower core part of git that was under development.
Once a packfile is created and we always use it read-only, there didn't
seem to be much point in suspecting that the underlying filesystems or
disks may corrupt them in such a way that is not caught by the SHA-1
checksum over the entire packfile and per object checksum. That trust in
the filesystems might have been a good tradeoff between fsck performance
and reliability on platforms git was initially developed on and for, but
it may not be true anymore as we run on many more platforms these days.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's nice to search for an author by merely clicking on their name in
gitweb. This is usually faster than selecting the name, copying the
selection, pasting it into the search box, selecting between
author/committer and then hitting enter.
Linkify the avatar icon in log/shortlog view because the icon is directly
adjacent to the name and thus more related. The same is not true
when in commit/tag view where the icon is farther away.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you use the option --submodule=log you can see the submodule
summaries inlined in the diff, instead of not-quite-helpful SHA-1 pairs.
The format imitates what "git submodule summary" shows.
To do that, <path>/.git/objects/ is added to the alternate object
databases (if that directory exists).
This option was requested by Jens Lehmann at the GitTogether in Berlin.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git stash list' had an undocumented limit of 10 stashes, unless other
git-log arguments were specified. This surprised at least one user,
but possibly served to cut the output below a screenful without using
a pager.
Since the last commit, 'git stash list' will fire up a pager according
to the same rules as the 'git log' it calls, so we can drop the limit.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the new formats, we can rewrite 'git stash list' in terms of an
appropriate pretty format, instead of hand-editing with sed. This has
the advantage that it obeys the normal settings for git-log, notably
the pager.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add three new --pretty=format escapes:
%gD long reflog descriptor (e.g. refs/stash@{0})
%gd short reflog descriptor (e.g. stash@{0})
%gs reflog message
This is achieved by passing down the reflog info, if any, inside the
pretty_print_context struct.
We use the newly refactored get_reflog_selector(), and give it some
extra functionality to extract a shortened ref. The shortening is
cached inside the commit_reflogs struct; the only allocation of it
happens in read_complete_reflog(), where it is initialised to 0. Also
add another helper get_reflog_message() for the message extraction.
Note that the --format="%h %gD: %gs" tests may not work in real
repositories, as the --pretty formatter doesn't know to leave away the
": " on the last commit in an incomplete (because git-gc removed the
old part) reflog. This equivalence is nevertheless the main goal of
this patch.
Thanks to Jeff King for reviews, the %gd testcase and documentation.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'll use the same output in an upcoming commit, so refactor its
formatting (which was duplicated anyway) into a separate function.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pretty_print_commit() has a bunch of rarely-used arguments, and
introducing more of them requires yet another update of all the call
sites. Refactor most of them into a struct to make future extensions
easier.
The ones that stay "plain" arguments were chosen on the grounds that
all callers put real arguments there, whereas some callers have 0/NULL
for all arguments that were factored into the struct.
We declare the struct 'const' to ensure none of the callers are bitten
by the changed (no longer call-by-value) semantics.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SSL_set_fd (and friends) expects a OS file handle on Windows, not
a file descriptor as on UNIX(-ish).
This patch makes the Windows version of SSL_set_fd behave like the
UNIX versions, by calling _get_osfhandle on it's input.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the POSIX-specific tunneling code has been replaced
by the run-command API (and a compile-error has been
cleaned away), we can now enable imap-send on Windows
builds.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mmsystem.h (included from windows.h) defines DRV_OK to 1. To avoid
an error due to DRV_OK redefenition, this patch undefines the old
definition (i.e the one from mmsystem.h) before defining DRV_OK.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a patch that enables us to use the run-command
API, which is supported on Windows.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The imap-send code is based on code from isync, a program
for syncing imap mailboxes. Because of this, it has
inherited some code that makes sense for isync, but not for
imap-send.
In particular, when storing a message, it does one of:
- if the server supports it, note the server-assigned
unique identifier (UID) given to each message
- otherwise, assigned a random UID and store it in the
message header as X-TUID
Presumably this is used in isync to be able to synchronize
mailstores multiple times without duplication. But for
imap-send, the values are useless; we never do anything
with them and simply forget them at the end of the program.
This patch removes the useless code. Not only is it nice for
maintainability to get rid of dead code, but the removed
code relied on the existence of /dev/urandom, which made it
a portability problem for non-Unix platforms.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also verify that multiple references to the _same_ note blob are _not_
concatenated.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, having multiple notes referring to the same commit from various
locations in the notes tree is strongly discouraged, since only one of those
notes will be parsed and shown.
This patch teaches the notes code to _concatenate_ multiple notes that
annotate the same commit. Notes are concatenated by creating a new blob
object containing the concatenation of the notes in question, and
replacing them with the concatenated note in the internal notes tree
structure.
Getting the concatenation right requires being more proactive in unpacking
subtree entries in the internal notes tree structure, so that we don't return
a note prematurely (i.e. before having found all other notes that annotate
the same object). As such, this patch may incur a small performance penalty.
Suggested-by: Sam Vilain <sam@vilain.net>
Re-suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The semantics used when parsing notes trees (with regards to fanout subtrees)
follow Dscho's proposal fairly closely:
- No concatenation/merging of notes is performed. If there are several notes
objects referencing a given commit, only one of those objects are used.
- If a notes object for a given commit is present in the "root" notes tree,
no subtrees are consulted; the object in the root tree is used directly.
- If there are more than one subtree that prefix-matches the given commit,
only the subtree with the longest matching prefix is consulted. This
means that if the given commit is e.g. "deadbeef", and the notes tree have
subtrees "de" and "dead", then the following paths in the notes tree are
searched: "deadbeef", "dead/beef". Note that "de/adbeef" is NOT searched.
- Fanout directories (subtrees) must references a whole number of bytes
from the SHA1 sum they subdivide. E.g. subtrees "dead" and "de" are
acceptable; "d" and "dea" are not.
- Multiple levels of fanout are allowed. All the above rules apply
recursively. E.g. "de/adbeef" is preferred over "de/adbe/ef", etc.
This patch changes the in-memory datastructure for holding parsed notes:
Instead of holding all note (and subtree) entries in a hash table, a
simple 16-tree structure is used instead. The tree structure consists of
16-arrays as internal nodes, and note/subtree entries as leaf nodes. The
tree is traversed by indexing subsequent nibbles of the search key until
a leaf node is encountered. If a subtree entry is encountered while
searching for a note, the subtree is unpacked into the 16-tree structure,
and the search continues into that subtree.
The new algorithm performs significantly better in the cases where only
a fraction of the notes need to be looked up (this is assumed to be the
common case for notes lookup). The new code even performs marginally
better in the worst case (where _all_ the notes are looked up).
In addition to this, comes the massive performance win associated with
organizing the notes tree according to some fanout scheme. Even a simple
2/38 fanout scheme is dramatically quicker to traverse (going from tens of
seconds to sub-second runtimes).
As for memory usage, the new code is marginally better than the old code in
the worst case, but in the case of looking up only some notes from a notes
tree with proper fanout, the new code uses only a small fraction of the
memory needed to hold the entire notes tree.
However, there is one casualty of this patch. The old notes lookup code was
able to parse notes that were associated with non-SHA1s (e.g. refs). The new
code requires the referenced object to be named by a SHA1 sum. Still, this
is not considered a major setback, since the notes infrastructure was not
originally intended to annotate objects outside the Git object database.
Cc: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to be rude to memory-concious callers...
This patch has been improved by the following contributions:
- Junio C Hamano: avoid old-style declaration
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds the following flags to get_commit_notes() for adjusting the
format of the produced note string:
- NOTES_SHOW_HEADER: Print "Notes:" line before the notes contents
- NOTES_INDENT: Indent notes contents by 4 spaces
Suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Creating repos with 10/100/1000/10000 commits and notes takes a lot of time.
However, using git-fast-import to do the job is a lot more efficient than
using plumbing commands to do the same.
This patch decreases the overall run-time of this test on my machine from
~3 to ~1 minutes.
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a 'notemodify' subcommand of the 'commit' command. This subcommand
is similar to 'filemodify', except that no mode is supplied (all notes have
mode 0644), and the path is set to the hex SHA1 of the given "comittish".
This enables fast import of note objects along with their associated commits,
since the notes can now be named using the mark references of their
corresponding commits.
The patch also includes a test case of the added functionality.
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-m" and "-F" options are already the established method
(in both git-commit and git-tag) to specify a commit/tag message
without invoking the editor. This patch teaches "git notes edit"
to respect the same options for specifying a notes message without
invoking the editor.
Multiple "-m" and/or "-F" options are concatenated as separate
paragraphs.
The patch also updates the "git notes" documentation and adds
selftests for the new functionality. Unfortunately, the added
selftests include a couple of lines with trailing whitespace
(without these the test will fail). This may cause git to warn
about "whitespace errors".
This patch has been improved by the following contributions:
- Thomas Rast: fix trailing whitespace in t3301
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-notes have the potential of being pretty expensive, so test with
a lot of commits. A lot. So to make things cheaper, you have to
opt-in explicitely, by setting the environment variable
GIT_NOTES_TIMING_TESTS.
This patch has been improved by the following contributions:
- Junio C Hamano: tests: fix "export var=val"
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To avoid looking up each and every commit in the notes ref's tree
object, which is very expensive, speed things up by slurping the tree
object's contents into a hash_map.
The idea for the hashmap singleton is from David Reiss, initial
benchmarking by Jeff King.
Note: the implementation allows for arbitrary entries in the notes
tree object, ignoring those that do not reference a valid object. This
allows you to annotate arbitrary branches, or objects.
This patch has been improved by the following contributions:
- Junio C Hamano: fixed an obvious error in initialize_hash_map()
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script 'git notes' allows you to edit and show commit notes, by
calling either
git notes show <commit>
or
git notes edit <commit>
This patch has been improved by the following contributions:
- Tor Arne Vestbø: fix printing of multi-line notes
- Michael J Gruber: test and handle empty notes gracefully
- Thomas Rast:
- only clean up message file when editing
- use GIT_EDITOR and core.editor over VISUAL/EDITOR
- t3301: fix confusing quoting in test for valid notes ref
- t3301: use test_must_fail instead of !
- refuse to edit notes outside refs/notes/
- Junio C Hamano: tests: fix "export var=val"
- Christian Couder: documentation: fix 'linkgit' macro in "git-notes.txt"
- Johan Herland: minor cleanup and bugfixing in git-notes.sh (v2)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Tor Arne Vestbø <tavestbo@trolltech.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit notes are blobs which are shown together with the commit
message. These blobs are taken from the notes ref, which you can
configure by the config variable core.notesRef, which in turn can
be overridden by the environment variable GIT_NOTES_REF.
The notes ref is a branch which contains "files" whose names are
the names of the corresponding commits (i.e. the SHA-1).
The rationale for putting this information into a ref is this: we
want to be able to fetch and possibly union-merge the notes,
maybe even look at the date when a note was introduced, and we
want to store them efficiently together with the other objects.
This patch has been improved by the following contributions:
- Thomas Rast: fix core.notesRef documentation
- Tor Arne Vestbø: fix printing of multi-line notes
- Alex Riesen: Using char array instead of char pointer costs less BSS
- Johan Herland: Plug leak when msg is good, but msglen or type causes return
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Tor Arne Vestbø <tavestbo@trolltech.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_commit_notes(): Plug memory leak when 'if' triggers, but not because of read_sha1_file() failure
The newly added function can rewrap text according to a given first-line
indent, other-indent and text width.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
print_wrapped_text() will insert its own newlines. Up until now, if the
text passed to it contained newlines, they would not be handled properly
(the wrapping got confused after that).
The strategy is to replace a single new-line with a space, but keep double
new-lines so that already-wrapped text with empty lines between paragraphs
will be handled properly.
However, single new-line characters are only handled this way if the
character after it is an alphanumeric character, as per Linus' suggestion.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We don't want to use output() on git-commit --amend when rewording the
commit message. This leads to confusion as the editor is run in a
subshell with it's output saved away, leaving the user with a seemingly
frozen terminal.
Fix by removing the output part.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The format template string was declared as "const void *" for some unknown
reason, even though it obviously is meant to be passed a string. Make it
"const char *".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the first things that cvsimport does is chdir to the
newly created git repo. This means that any filenames given
to us on the command line will be looked up relative to the
git repo directory. This is probably not what the user
expects, so let's remember and prepend the original
directory for relative filenames.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Get rid of the static variable that was used to prevent loading all
the refnames multiple times by moving that code out of describe(),
simply making sure it is only run once that way.
Also change the error message that is shown in case no refnames are
found to not include a hash any more, as the error condition is not
specific to any particular revision.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git push: say that --tag can't be used with --all or --mirror in help text
git push: remove incomplete options list from help text
document push's new quiet option
Makefile: clean block-sha1/ directory instead of mozilla-sha1/
'git push -h' shows usage text with incomplete list of options and then
has a separate list of options that are supported. Imitate the way other
commands (I looked at 'git diff' for an example) show their options.
Signed-off-by: しらいし ななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'make clean' should remove the object files from block-sha1/
instead of the non-existent mozilla-sha1/ directory.
Signed-off-by: Carlos R. Mafra <crmafra@aei.mpg.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'frotz' is not a valid object name and not a tracked filename,
we used to complain and failed this command. When there is only
one remote that has 'frotz' as one of its tracking branches, we can
DWIM it as a request to create a local branch 'frotz' forking from
the matching remote tracking branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it possible to invole the logic of verify_filename() to make sure the
pathname arguments are unambiguous without actually dying. The caller may
want to do something different.
* jc/maint-blank-at-eof:
diff -B: colour whitespace errors
diff.c: emit_add_line() takes only the rest of the line
diff.c: split emit_line() from the first char and the rest of the line
diff.c: shuffling code around
diff --whitespace: fix blank lines at end
core.whitespace: split trailing-space into blank-at-{eol,eof}
diff --color: color blank-at-eof
diff --whitespace=warn/error: fix blank-at-eof check
diff --whitespace=warn/error: obey blank-at-eof
diff.c: the builtin_diff() deals with only two-file comparison
apply --whitespace: warn blank but not necessarily empty lines at EOF
apply --whitespace=warn/error: diagnose blank at EOF
apply.c: split check_whitespace() into two
apply --whitespace=fix: detect new blank lines at eof correctly
apply --whitespace=fix: fix handling of blank lines at the eof
When creating an info/grafts under windows, one typically gets a CRLF file.
There is no good reason to forbid trailing CR at the end of the line (for
that matter, any trailing whitespaces); the code allowed only LF simply
because that was good enough for the platforms with LF line endings.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
change throughput display units with fast links
clone: Supply the right commit hash to post-checkout when -b is used
remote-curl: add missing initialization of argv0_path
The custom CGI escaping done in esc_param failed to escape UTF-8
properly. Fix by using CGI::escape on each sequence of matched
characters instead of sprintf()ing a custom escaping for each byte.
Additionally, the space -> + escape was being escaped due to greedy
matching on the first substitution. Fix by adding space to the
list of characters not handled on the first substitution.
Finally, remove an unnecessary escaping of the + sign.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
‘git bisect reset’ accepts an optional argument specifying a branch to
check out after cleaning up the bisection state. This lets you
specify an arbitrary commit.
In particular, this provides a way to clean the bisection state
without moving HEAD: ‘git bisect reset HEAD’. This may be useful if
you are not interested in the state before you began a bisect,
especially if checking out the old commit would be expensive and
invalidate most of your compiled tree.
Clarify the ‘git bisect reset’ documentation to explain this optional
argument, which was previously mentioned only in the usage message.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dae556b (environment: add global variable to disable replacement)
adds a variable to enable/disable replacement, and it is enabled by
default for most commands.
So there is no way to disable it for some commands, which is annoying
when we want to get information about a commit that has been replaced.
For example:
$ git cat-file -p N
would output information about the replacement commit if commit N is
replaced.
With the "--no-replace-objects" option that this patch adds it is
possible to get information about the original commit using:
$ git --no-replace-objects cat-file -p N
While at it, let's add some documentation about this new option in the
"git replace" man page too.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
normalize_path_copy() is a complicated function, but most of its
functionality will never apply to a ref name that has been checked
with check_ref_format().
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tolerating empty path components in ref names means each ref does
not have a unique name. This creates difficulty for porcelains
that want to see if two branches are equal. Add a helper associating
to each ref a canonical name.
If a user asks a porcelain to create a ref "refs/heads//master",
the porcelain can run "git check-ref-format --print refs/heads//master"
and only deal with "refs/heads/master" from then on.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unless one already knew, it was not obvious what sort of shorthand
"git check-ref-format --branch" expands. Explain it.
The --branch argument is not optional.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git check-ref-format" command is a basic command various
porcelains rely on. Test its functionality to make sure it does
not unintentionally change.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git log --graph --oneline --decorate --all' is a useful way to get a
general overview of the repository state, similar to 'gitk --all'.
Let it indicate the position of HEAD by loading that ref too, so that
the --decorate code can see it.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before the --, always attempt ref completion. This helps with
entering the <treeish> arguments to git-grep. As a bonus, you can
work around git-grep's current lack of --all by hitting M-*, ugly as
the resulting command line may be.
Strictly speaking, completing the regular expression argument (or
option argument) makes no sense. However, we cannot prevent _all_
completion (it will fall back to filenames), so we dispense with any
additional complication to detect whether the user still has to enter
a regular expression.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In all parts of git, .gitignore and other exclude files
impact only how we treat untracked files; they should have
no effect on files listed in the index.
This behavior was originally implemented very early on in
9ff768e, but only for --exclude-from. Later, commit 63d285c
accidentally caused us to trigger the behavior for
--exclude-per-directory.
This patch totally ignores excludes for files found in the
index. This means we are reversing the original intent of
9ff768e, while at the same time fixing the accidental
behavior of 63d285c. This is a good thing, though, as the
way that 9ff768e behaved does not really make sense with the
way exclusions are used in modern git.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When unpack_index_entry() failed, consistently call unpack_failed(),
instead of silently returning -1.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
20a16eb (unpack_trees(): fix diff-index regression., 2008-03-10) adjusted
diff-index to the new world order since 34110cd (Make 'unpack_trees()'
have a separate source and destination index, 2008-03-06). Callbacks are
expected to return anything non-negative as "success", and instead of
reporting how many index entries they have processed, they are expected to
advance o->pos themselves. The code did so, but a stale comment was left
behind.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make "git add -p" to not skip files that are in index even if they are
excluded (by .gitignore etc.). This fixes the contradictory behavior
that "git status" and "git commit -a" listed such files as modified, but
"git add -p FILENAME" ignored them.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some MTAs reject Cc: lines longer than 78 chars.
Avoid this by using the same join as "To:" ",\n\t"
so each subsequent Cc entry is on a new line.
RCPT TO: should have a single entry per line.
see: http://www.ietf.org/rfc/rfc2821.txt
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'patch' view is about generating text/plain patch that can be
given to "git am", and "git am" doesn't understand merges anyway.
Therefore link to 'patch' view should not be shown for merge commits.
Also call to git-format-patch inside the 'patch' action would fail
when 'patch' action is called for a merge commit, with "Reading
git-format-patch failed" text as 'patch' view body.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it easier to edit just the commit message for a commit
using 'git rebase -i' by introducing the "reword" command.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the "pretty" machinery to expand '%+x' to a LF followed by
the expansion of '%x' if and only if '%x' expands to a non-empty string,
and to remove LFs before '%-x' if '%x' expands to an empty string. This
works for any supported expansion placeholder 'x'.
This is expected to be immediately useful to reproduce the commit log
message with "%s%+b%n"; "%s%n%b%n" adds one extra LF if the log message is
a one-liner.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate some english words to portuguese and fix some
typos on translation.
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
It is more customizable, and uses a line prefix to show the commit.
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some people have mod_cgid instead of mod_cgi, most likely as a result of
choosing a threaded MPM.
In cases where the user has both modules, mod_cgi will be preferred in
order to maintain a simpler setup.
This patch also causes instaweb to print a message and die in cases
where there is no module that instaweb knows how to handle.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Makes things nicer in cases when you hand craft the snapshot URL but
make a typo in defining the hash variable (e.g. netx instead of next);
you will now get an error message instead of a broken tarball.
Tests for t9501 are included to demonstrate added functionality.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This fixes a bug introduced by the "display summary when showing diff of a
submodule" patch. It lead to a "no such variable" error when opening the
diff context menu while no diff was shown.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When <path> is not given, use the "humanish" part of the source repository
instead.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to get a list of remote tags to see if we need to fetch
any we were doing a linear search for the matching tag ref for the
tag^{} commit entries. This proves to be incredibly slow for large
numbers of tags. Rewrite the function so that we build up a
string_list of refs to fetch and then process that instead.
As an extreme example, for a repository with 50000 tags (and just a
single commit on a single branch), a fetch that does nothing goes from
~1m50s to ~4.1s.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jc/maint-1.6.0-blank-at-eof' (early part):
diff.c: emit_add_line() takes only the rest of the line
diff.c: split emit_line() from the first char and the rest of the line
* 'jc/maint-1.6.0-blank-at-eof' (early part):
diff --whitespace: fix blank lines at end
core.whitespace: split trailing-space into blank-at-{eol,eof}
diff --color: color blank-at-eof
diff --whitespace=warn/error: fix blank-at-eof check
diff --whitespace=warn/error: obey blank-at-eof
diff.c: the builtin_diff() deals with only two-file comparison
apply --whitespace: warn blank but not necessarily empty lines at EOF
apply --whitespace=warn/error: diagnose blank at EOF
apply.c: split check_whitespace() into two
apply --whitespace=fix: detect new blank lines at eof correctly
apply --whitespace=fix: fix handling of blank lines at the eof
We used to send the old and new contents more or less straight out to the
output with only the original "old is red, new is green" colouring. Now
all the necessary support routines have been prepared, call them with a
line of data at a time from the output code and have them check and color
whitespace errors in exactly the same way as they are called from the low
level diff callback routines.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the first character on the line that is fed to this function is always
"+", it is pointless to send that along with the rest of the line.
This change will make it easier to reuse the logic when emitting the
rewrite diff, as we do not want to copy a line only to add "+"/"-"/" "
immediately before its first character when we produce rewrite diff
output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new helper function emit_line_0() takes the first line of diff output
(typically "-", " ", or "+") separately from the remainder of the line.
No other functional changes.
This change will make it easier to reuse the logic when emitting the
rewrite diff, as we do not want to copy a line only to add "+"/"-"/" "
immediately before its first character when we produce rewrite diff
output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move function, type, and structure definitions for fill_mmfile(),
count_trailing_blank(), check_blank_at_eof(), emit_line(),
new_blank_line_at_eof(), emit_add_line(), sane_truncate_fn, and
emit_callback up in the file, so that they can be refactored into helper
functions and reused by codepath for emitting rewrite patches.
This only moves the lines around to make the next two patches easier to
read.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earlier logic tried to colour any and all blank lines that were added
beyond the last blank line in the original, but this was very wrong. If
you added 96 blank lines, a non-blank line, and then 3 blank lines at the
end, only the last 3 lines should trigger the error, not the earlier 96
blank lines.
We need to also make sure that the lines are after the last non-blank line
in the postimage as well before deciding to paint them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I often close git gui window when it is maximized, and when I reopen
it next time the it would usually become out of place (e.g. a huge
window with a top-left corner somewhere close to the center of the
screen). Fix it by storing and restoring wm state in config, as well
as setting wm state to normal before retrieving wm geometry info.
Signed-off-by: Alexey Borzenkov <snaury@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This fixes a bug where the compare-commits function would advance
to a fake node (one representing local changes, either checked in
but not committed, or not checked in) and then get an error when
trying to get the patch-id. This fixes it by only considering the
real children of each commit.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Add support for 'show-sizes' feature to show (in separate column,
between mode and filename) the size of blobs (files) in the 'tree'
view. It passes '-l' option to "git ls-tree" invocation.
For the 'tree' and 'commit' (submodule) entries, '-' is shown in place
of size; for generated '..' "up directory" entry nothing is shown.
The 'show-sizes' feature is enabled by default.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When comparing a string of commits, when we find two non-merge commits
that differ, we now write the two commits to files and diff the files.
This pulls out the logic for creating a temporary directory from
external_diff into a separate procedure so that the new diffcommits
procedure can use it.
Because the diff command returns an exit status of 1 when the files
differ, and Tcl treats that as an error, this adds catch {} around the
close statements in getblobdiffline.
At present this only removes the temporary files when gitk exits. It
should remove them when the diff is done.
Signed-off-by: Paul Mackerras <paulus@samba.org>
People who configured trailing-space depended on it to catch both extra
white space at the end of line, and extra blank lines at the end of file.
Earlier attempt to introduce only blank-at-eof gave them an escape hatch
to keep the old behaviour, but it is a regression until they explicitly
specify the new error class.
This introduces a blank-at-eol that only catches extra white space at the
end of line, and makes the traditional trailing-space a convenient synonym
to catch both blank-at-eol and blank-at-eof. This way, people who used
trailing-space continue to catch both classes of errors.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also move the hide-remotes option up into the commit display options
in the Edit->Preferences panel, since it affects the commit display
more than the diff display.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Since the coloring logic processed the patch output one line at a time, we
couldn't easily color code the new blank lines at the end of file.
Reuse the adds_blank_at_eof() function to find where the runs of such
blank lines start, keep track of the line number in the preimage while
processing the patch output one line at a time, and paint the new blank
lines that appear after that line to implement this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "diff --check" logic used to share the same issue as the one fixed for
"git apply" earlier in this series, in that a patch that adds new blank
lines at end could appear as
@@ -l,5 +m,7 @@$
_context$
_context$
-deleted$
+$
+$
+$
_$
_$
where _ stands for SP and $ shows a end-of-line. Instead of looking at
each line in the patch in the callback, simply count the blank lines from
the end in two versions, and notice the presence of new ones.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "diff --check" code used to conflate trailing-space whitespace error
class with this, but now we have a proper separate error class, we should
check it under blank-at-eof, not trailing-space.
The whitespace error is not about _having_ blank lines at end, but about
adding _new_ blank lines. To keep the message consistent with what is
given by "git apply", call whitespace_error_string() to generate it,
instead of using a hardcoded custom message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The combined diff is implemented in combine_diff() and fn_out_consume()
codepath never has to deal with anything but two-file comparision.
Drop nparents from the emit_callback structure and simplify the code.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The whitespace error of adding blank lines at the end of file should
trigger if you added a non-empty line at the end, if the contents of the
line is full of whitespaces.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" strips new blank lines at EOF under --whitespace=fix option,
but neigher --whitespace=warn nor --whitespace=error paid any attention to
these errors.
Introduce a new whitespace error class, blank-at-eof, to make the
whitespace error handling more consistent.
The patch adds a new "linenr" field to the struct fragment in order to
record which line the hunk started in the input file, but this is needed
solely for reporting purposes. The detection of this class of whitespace
errors cannot be done while parsing a patch like we do for all the other
classes of whitespace errors. It instead has to wait until we find where
to apply the hunk, but at that point, we do not have an access to the
original line number in the input file anymore, hence the new field.
Depending on your point of view, this may be a bugfix that makes warn and
error in line with fix. Or you could call it a new feature. The line
between them is somewhat fuzzy in this case.
Strictly speaking, triggering more errors than before is a change in
behaviour that is not backward compatible, even though the reason for the
change is because the code was not checking for an error that it should
have. People who do not want added blank lines at EOF to trigger an error
can disable the new error class.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This splits the logic to record the presence of whitespace errors out of
the check_whitespace() function, which checks and then records. The new
function, record_ws_error(), can be used by the blank-at-eof check that
does not use ws_check() logic to report its findings in the same output
format.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command tries to strip blank lines at the end of the file added by a
patch. It is done by first detecting if a hunk in patch has additional
blank lines at the end of itself, and if so checking if such a hunk
applies at the end of file. This patch addresses a bug in the logic to
implement the former (the previous one addressed a bug in the latter).
If the original ends with blank lines, often the patch hunk ends like
this:
@@ -l,5 +m,7 @@$
_context$
_context$
-deleted$
+$
+$
+$
_$
_$
where _ stands for SP and $ shows a end-of-line. This example patch adds
three trailing blank lines, but the code fails to notice it, because it
only pays attention to added blank lines at the very end of the hunk. In
this example, the three added blank lines do not appear textually at the
end in the patch, even though you can see that they are indeed added at
the end, if you rearrange the diff like this:
@@ -l,5 +m,7 @@$
_context$
_context$
-deleted$
_$
_$
+$
+$
+$
The fix is not to reset the number of (candidate) added blank lines at the
end when the loop sees a context line that is empty.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b94f2ed (builtin-apply.c: make it more line oriented, 2008-01-26) broke
the logic used to detect if a hunk adds blank lines at the end of the
file. With the new code after that commit:
- img holds the contents of the file that the hunk is being applied to;
- preimage has the lines the hunk expects to be in img; and
- postimage has the lines the hunk wants to update the part in img that
corresponds to preimage with.
and we need to compare if the last line of preimage (not postimage)
matches the last line of img to see if the hunk applies at the end of the
file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It requires that $JSMIN command can function as a filter.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new 'blame_incremental' view requires JavaScript to run. Not all
web browsers implement JavaScript (e.g. text browsers such as Lynx),
and not all users have JavaScript enabled. Therefore instead of
unconditionally linking to 'blame_incremental' view, we use JavaScript
to convert those links to lead to view utilizing JavaScript, by adding
'js=1' to link.
Currently the only action that takes 'js=1' into account is 'blame',
which then acts as if it was called as 'blame_incremental' action.
Possible enhancement would be to do JavaScript redirect by setting
window.location instead of modifying $format and $action in
git_blame_common() subroutine.
The only JavaScript-aware/using view is currently 'blame_incremental'.
While at it move reading JavaScript to git_footer_html() subroutine.
Note that in this view we do not add 'js=1' currently (even though
perhaps we should; note that for consistency we should also add 'js=1'
in links added by JavaScript part of 'blame_incremental').
This idea was originally implemented by Petr Baudis in
http://article.gmane.org/gmane.comp.version-control.git/47614
but it added <script> element with fixBlameLinks() function in page
header, to be added as onload event using 'onload' attribute of HTML
'body' element: <body onload="fixBlameLinks();">. This version adds
script at then end of page (in the page footer), and uses JavaScript
'window.onload=fixLinks();'. Also in Petr version only links marked
with 'blamelink' class were modified, and they were modified by
replacing "a=blame" by "a=blame_incremental"... which doesn't work for
path_info links, and might replace wrong part if there is "a=blame" in
project name, ref name or file name.
Slightly different solution was implemented by Martin Koegler in
http://thread.gmane.org/gmane.comp.version-control.git/47902/focus=47905
Here GitAddLinks() function was in gitweb.js file, not as contents of
<script> element. It was also included in page header (in <head>
element) though, which means waiting for a script to load (and run).
It was smarter in that to "fix" (modify) link, it split URL, modified
value of 'a' parameter, and then recreated modified link. It avoids
trouble with "a=blame" as substring in project name or file name, but
it doesn't work with path_info URL/link in the way it was written.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This requires using 3 colors, not only two, to choose a color that is
different from colors of up to 2 neighbors.
gitweb.js selects the least used color, if more than one color is
possible.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'blame_incremental' view, which uses "git blame --incremental"
and JavaScript (Ajax), where 'blame' use "git blame --porcelain".
* gitweb generates initial info by putting file contents (from
"git cat-file") together with line numbers in blame table
* then gitweb makes web browser JavaScript engine call startBlame()
function from gitweb.js
* startBlame() opens XMLHttpRequest connection to 'blame_data' view,
which in turn calls "git blame --incremental" for a file, and
streams output of git-blame to JavaScript (gitweb.js)
* XMLHttpRequest event handler updates line info in blame view as soon
as it gets data from 'blame_data' (from server), and it also updates
progress info
* when 'blame_data' ends, and gitweb.js finishes updating line info,
it fixes colors to match (as far as possible) ordinary 'blame' view,
and updates information about how long it took to generate page.
Gitweb deals with streamed 'blame_data' server errors by displaying
them in the progress info area (just in case).
The 'blame_incremental' view tries to be equivalent to 'blame' action;
there are however a few differences in output between 'blame' and
'blame_incremental' view:
* 'blame_incremental' always used query form for this part of link(s)
which is generated by JavaScript code. The difference is visible
if we use path_info link (pass some or all arguments in path_info).
Changing this would require implementing something akin to href()
subroutine from gitweb.perl in JavaScript (in gitweb.js).
* 'blame_incremental' always uses "rowspan" attribute, even if
rowspan="1". This simplifies code, and is not visible to user.
* The progress bar and progress info are still there even after
JavaScript part of 'blame_incremental' finishes work.
Note that currently no link generated by gitweb leads to this new view.
This code is based on patch by Petr Baudis <pasky@suse.cz> patch, which
in turn was tweaked up version of Fredrik Kuivinen <frekui@gmail.com>'s
proof of concept patch.
This patch adds GITWEB_JS compile configuration option, and modifies
git-instaweb.sh to take gitweb.js into account. The code for
git-instaweb.sh was taken from Pasky's patch.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add "This page took XXX seconds and Y git commands to generate"
to page footer, if global feature 'timed' is enabled (disabled
by default). Requires Time::HiRes installed for high precision
'wallclock' time.
Note that Time::HiRes is being required unconditionally; this is
because setting $t0 variable needs to be done fairly early to have
running time of the whole script. If Time::HiRes module were required
only if 'timed' feature is enabled, the earliest place where starting
time ($t0) could be calculated would be after reading gitweb config,
making "time to generate page" info inaccurate.
This code is based on example code by Petr 'Pasky' Baudis.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When quoting an arbitrary user string in Tcl, its better to use
[list ...] than to use {...}, in case the user string has spaces
or { embedded within it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When a submodule commit had already been staged and another commit had
been checked out inside the submodule, the diff always displayed the
submodule commit log messages between the last supermodule commit and
the working tree, totally ignoring the commit in the index.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When there is a large number of new or modified files,
"display_all_files" takes a long time, and git-gui appears to hang.
This change limits the number of files that are displayed. This
limit can be set as gui.maxfilesdisplayed, and is 5000 by default.
A warning is shown the first time the list of files is truncated
in this GUI session. Subsequent truncations are not mentioned to
the user.
Signed-off-by: Dan Zwell <dzwell@zwell.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user wants to delete a remote branch and selects the correct
"merged into" we should not warn that "Recovering deleted branches is
difficult". For local branches we do the same already.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
As it is hard to say what changed in a submodule by looking at the hashes,
let's show the colored submodule summary instead.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
By default, we remove leading [bracketed] [strings] from the Subject:
header when coming up with the summary of the patch. This is because
there are mailing lists etc that add their own headers to the subject, and
they know they can add things in brackets. The most obvious example is the
Linux kernel security list. Their emails look like
Subject: [Security] [patch] random: make get_random_int() more random
and other people mangle Subject: themselves in a similar way, e.g.:
Subject: [PATCH -rc] [BUGFIX] x86: fix kernel_trap_sp()
Subject: [BUGFIX][PATCH] fix bad page removal from LRU (Was Re: [RFC][PATCH] ..
even though "fix" is more than enough cue to mark it as a [BUGFIX].
Some projects however want to keep these bracketed strings. With this
option, we remove only [bracketed strings that contain word PATCH], so we
will turn things like these
[PATCH] [mailinfo] -b ...
[PATCH v2] [mailinfo] -b ...
[PATCH (v2) 1/4] [mailinfo] -b ...
into
[mailinfo] -b ...
This lacks tests and integration to the "git am" toolchain to be useful,
but it is a start.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a typo in the commit selection combobox that prevented it
from working properly, and sets the width of the widget. This also
fixes show_error to handle errors arising before the gui is fully
configured (ie: invalid command line parameters)
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
With Tk 8.5+, this uses the themed widgets to improve the appearance
on Windows and MacOSX. On X11 less difference is apparent, but users
can select alternate themes by setting *TkTheme in the resource
database (eg: *TkTheme: clam).
With Tk 8.6 there is a built-in font selection dialog. This will make
use of that when available, as on Windows and MacOSX it calls the
native font selection dialog.
[paulus@samba.org - folded in subsequent patch to restore saved
pane sizes for ttk widgets, and trimmed trailing whitespace.]
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This arranges to save the scrolling position of the diff display pane
when we move from displaying one thing to another, and then scroll the
pane to the same position when we go back to the previous thing using
the back or forward buttons. This works if we have clicked on a commit
and are in patch display mode, or if we have clicked on a line or a tag,
or have done a diff between two commits with the context menu. It
doesn't currently restore the pane to where it was if is was displaying
a commit in tree display mode.
For future extensibility, addtohistory now takes an extra optional
argument which is a script to invoke when moving from this thing to
another. The script needs to return a list of pairs of variable name
and value. If we go back to this thing, the godo procedure will set
the named variables to the values given. At present that is just used
to store the $ctext scrolling position, but in future we will use it
to store the state of which directories are open in the file list pane.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-23 13:14:23 +11:00
358 changed files with 22260 additions and 3167 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
