Code refactoring.
* pw/unquote-path-in-git-pm:
t9700: add tests for Git::unquote_path()
Git::unquote_path(): throw an exception on bad path
Git::unquote_path(): handle '\a'
add -i: move unquote_path() to Git.pm
We run an early part of "git gc" that deals with refs before
daemonising (and not under lock) even when running a background
auto-gc, which caused multiple gc processes attempting to run the
early part at the same time. This is now prevented by running the
early part also under the GC lock.
* jk/gc-pre-detach-under-hook:
gc: run pre-detach operations under lock
Code clean-up, that makes us in sync with Debian by one patch.
* jn/hooks-pre-rebase-sample-fix:
pre-rebase hook: capture documentation in a <<here document
The progress meter did not give a useful output when we haven't had
0.5 seconds to measure the throughput during the interval. Instead
show the overall throughput rate at the end, which is a much more
useful number.
* rs/progress-overall-throughput-at-the-end:
progress: show overall rate in last update
On Cygwin, similar to Windows, "git push //server/share/repository"
ought to mean a repository on a network share that can be accessed
locally, but this did not work correctly due to stripping the double
slashes at the beginning.
This may need to be heavily tested before it gets unleashed to the
wild, as the change is at a fairly low-level code and would affect
not just the code to decide if the push destination is local. There
may be unexpected fallouts in the path normalization.
* tb/push-to-cygwin-unc-path:
cygwin: allow pushing to UNC paths
Code cleanup.
* rs/apply-avoid-over-reading:
apply: use strcmp(3) for comparing strings in gitdiff_verify_name()
apply: use starts_with() in gitdiff_verify_name()
A recent update broke an alias that contained an uppercase letter.
* js/alias-case-sensitivity:
alias: compare alias name *case-insensitively*
t1300: demonstrate that CamelCased aliases regressed
The paragraph that describes the 'scissors' cleanup mode of
'commit' had the 'cut-line' in the middle of a sentence. This
made it possible for the line to get wrapped on smaler windows.
This shouldn't be the case as it makes it hard for the user to
understand the structure of the cut-line.
Reformat the pragraph to make the 'cut-line' stand on a line of
it's own thus distinguishing it from the rest of the paragraph.
This further prevents it from getting wrapped to some extent.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The i18n config variable used weren't readable as they were in
the crude form of how git stores/uses it's config variables.
Improve it's readability by replacing them with camelCased versions
of config variables as it doesn't have any impact on it's usage.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test_copy_bytes() function claims to read up to N bytes,
or until it gets EOF. But we never handle EOF in our loop,
and a short input will cause perl to go into an infinite
loop of read() getting zero bytes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
FD_CLOEXEC only applies to the file descriptor, so it needs to be
manipuluated via F_GETFD/F_SETFD. F_GETFL/F_SETFL are for file
description flags.
Verified via strace with o_cloexec set to zero.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is totally legitimate to add CamelCased aliases, but due to the way
config keys are compared, the case does not matter.
Therefore, we must compare the alias name insensitively to the config
keys.
This fixes a regression introduced by a9bcf6586d (alias: use
the early config machinery to expand aliases, 2017-06-14).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is totally legitimate to add CamelCased aliases, but due to the way
config keys are compared, the case does not matter.
Except that now it does: the alias name is expected to be all
lower-case. This is a regression introduced by a9bcf6586d (alias: use
the early config machinery to expand aliases, 2017-06-14).
Noticed by Alejandro Pauly, diagnosed by Kevin Willford.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rewrite of "git branch --list" using for-each-ref's internals
that happened in v2.13 regressed its handling of color.branch.local;
this has been fixed.
* kn/ref-filter-branch-list:
ref-filter.c: drop return from void function
branch: set remote color in ref-filter branch immediately
branch: use BRANCH_COLOR_LOCAL in ref-filter format
branch: only perform HEAD check for local branches
After "git branch --move" of the currently checked out branch, the
code to walk the reflog of HEAD via "log -g" and friends
incorrectly stopped at the reflog entry that records the renaming
of the branch.
* jk/reflog-walk-maint:
reflog-walk: include all fields when freeing complete_reflogs
reflog-walk: don't free reflogs added to cache
reflog-walk: duplicate strings in complete_reflogs list
reflog-walk: skip over double-null oid due to HEAD rename
We normally try to avoid having two auto-gc operations run
at the same time, because it wastes resources. This was done
long ago in 64a99eb47 (gc: reject if another gc is running,
unless --force is given, 2013-08-08).
When we do a detached auto-gc, we run the ref-related
commands _before_ detaching, to avoid confusing lock
contention. This was done by 62aad1849 (gc --auto: do not
lock refs in the background, 2014-05-25).
These two features do not interact well. The pre-detach
operations are run before we check the gc.pid lock, meaning
that on a busy repository we may run many of them
concurrently. Ideally we'd take the lock before spawning any
operations, and hold it for the duration of the program.
This is tricky, though, with the way the pid-file interacts
with the daemonize() process. Other processes will check
that the pid recorded in the pid-file still exists. But
detaching causes us to fork and continue running under a
new pid. So if we take the lock before detaching, the
pid-file will have a bogus pid in it. We'd have to go back
and update it with the new pid after detaching. We'd also
have to play some tricks with the tempfile subsystem to
tweak the "owner" field, so that the parent process does not
clean it up on exit, but the child process does.
Instead, we can do something a bit simpler: take the lock
only for the duration of the pre-detach work, then detach,
then take it again for the post-detach work. Technically,
this means that the post-detach lock could lose to another
process doing pre-detach work. But in the long run this
works out.
That second process would then follow-up by doing
post-detach work. Unless it was in turn blocked by a third
process doing pre-detach work, and so on. This could in
theory go on indefinitely, as the pre-detach work does not
repack, and so need_to_gc() will continue to trigger. But
in each round we are racing between the pre- and post-detach
locks. Eventually, one of the post-detach locks will win the
race and complete the full gc. So in the worst case, we may
racily repeat the pre-detach work, but we would never do so
simultaneously (it would happen via a sequence of serialized
race-wins).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this change, the sample hook does not pass a syntax check
(sh -n):
$ sh -n hooks--pre-rebase.sample
hooks--pre-rebase.sample: line 101: syntax error near unexpected token `('
hooks--pre-rebase.sample: line 101: ` merged into it again (either directly or indirectly).'
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few tests that tried to verify the contents of push certificates
did not use 'git rev-parse' to formulate the line to look for in
the certificate correctly.
* js/t5534-rev-parse-gives-multi-line-output-fix:
t5534: fix misleading grep invocation
The Makefile rule in contrib/subtree for building documentation
learned to honour USE_ASCIIDOCTOR just like the main documentation
set does.
* aw/contrib-subtree-doc-asciidoctor:
subtree: honour USE_ASCIIDOCTOR when set
The split index code did not honor core.sharedrepository setting
correctly.
* cc/shared-index-permfix:
t1700: make sure split-index respects core.sharedrepository
t1301: move modebits() to test-lib-functions.sh
read-cache: use shared perms when writing shared index
Fix a recent regression to "git rebase -i" and add tests that would
have caught it and others.
* pw/rebase-i-regression-fix-tests:
t3420: fix under GETTEXT_POISON build
rebase: add more regression tests for console output
rebase: add regression tests for console output
rebase -i: add test for reflog message
sequencer: print autostash messages to stderr
"git add -p" were updated in 2.12 timeframe to cope with custom
core.commentchar but the implementation was buggy and a
metacharacter like $ and * did not work.
* jk/add-p-commentchar-fix:
add--interactive: quote commentChar regex
add--interactive: handle EOF in prompt_yesno
The code to pick up and execute command alias definition from the
configuration used to switch to the top of the working tree and
then come back when the expanded alias was executed, which was
unnecessarilyl complex. Attempt to simplify the logic by using the
early-config mechanism that does not chdir around.
* js/alias-early-config:
alias: use the early config machinery to expand aliases
t7006: demonstrate a problem with aliases in subdirectories
t1308: relax the test verifying that empty alias values are disallowed
help: use early config when autocorrecting aliases
config: report correct line number upon error
discover_git_directory(): avoid setting invalid git_dir
The pretty-format specifiers like '%h', '%t', etc. had an
optimization that no longer works correctly. In preparation/hope
of getting it correctly implemented, first discard the optimization
that is broken.
* rs/pretty-add-again:
pretty: recalculate duplicate short hashes
An example in documentation that does not work in multi worktree
configuration has been corrected.
* ah/doc-gitattributes-empty-index:
doc: do not use `rm .git/index` when normalizing line endings
"git mergetool" learned to work around a wrapper MacOS X adds
around underlying meld.
* da/mergetools-meld-output-opt-on-macos:
mergetools/meld: improve compatibiilty with Meld on macOS X
The 'diff-highlight' program (in contrib/) has been restructured
for easier reuse by an external project 'diff-so-fancy'.
* jk/diff-highlight-module:
diff-highlight: split code into module
Sun's C compiler errors out on this pattern:
void foo() { ... }
void bar() { return foo(); }
Signed-off-by: Alejandro R. Sedeño <asedeno@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first illustration of the "RECOVERING FROM UPSTREAM REBASE"
section in the 'git-rebase' documentation meant to depict that
there are number of commits on the 'master' branch, but it is
longer than the 'master' branch in the following illustrations
by one commit, even though there is no resetting of 'master' to
lose that commit.
Correct it.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The values in struct throughput are only updated every 0.5 seconds. If
we're all done before that time span then the final update will show a
rate of 0 bytes/s, which is misleading if some bytes had been handled.
Remember the start time and show the total throughput instead.
And avoid division by zero by enforcing a minimum time span value of 1
(unit: 1/1024th of a second). That makes the resulting rate an
underestimation, but it's closer to the actual value than the currently
shown 0 bytes/s.
Reported-by: 積丹尼 Dan Jacobson <jidanni@jidanni.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't know the length of the C string "another". It could be
shorter than "name", which we compare it to using memchr(3). Call
strcmp(3) instead to avoid running over the end of the former, and
get rid of a strlen(3) call as a bonus.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We set the current and local branch colors at the top of the
build_format() function. Let's do the same for the remote
color. This saves a little bit of repetition, but more
importantly it puts all of the color-setting in the same
place. That makes it easier to see that we are coloring all
possibilities.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 949af0684 (branch: use ref-filter printing APIs,
2017-01-10), git-branch's output is generated by passing a
custom format to the ref-filter code. This format forgot to
pass BRANCH_COLOR_LOCAL, meaning that local branches
(besides the current one) were never colored at all.
We can add it in the %(if) block where we decide whether the
branch is "current" or merely "local". Note that this means
the current/local coloring is either/or. You can't set:
[color "branch"]
local = blue
current = bold
and expect the current branch to be "bold blue". This
matches the pre-949af0684 behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When assembling the ref-filter format to show "git branch"
output, we put the "%(if)%(HEAD)" conditional at the start
of the overall format. But there's no point in checking
whether a remote branch matches HEAD, as it never will.
The check should go inside the local conditional; we
assemble that format inside the "local" strbuf.
By itself, this is just a minor optimization. But in a
future patch, we'll need this refactoring to fix
local-branch coloring.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we encounter an error adding reflogs for a walk, we try
to free any logs we have read. But we didn't free all
fields, meaning that we could in theory leak all of the
"items" array (which would consitute the bulk of the
allocated memory).
This patch adds a helper which frees all of the entries and
uses it as appropriate.
As it turns out, the leak seems impossible to trigger with
the current code. Of the three error paths that free the
complete_reflogs struct, two only kick in when the items
array is empty, and the third was removed entirely in the
previous commit.
So this patch should be a noop in terms of behavior, but it
fixes a potential maintenance headache should anybody add a
new error path and copy the partial-free code. Which is
what happened in 5026b47175 (add_reflog_for_walk: avoid
memory leak, 2017-05-04), though its leaky call was the
third one that was recently removed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The add_reflog_for_walk() function keeps a cache mapping
refnames to their reflog contents. We use a cached reflog
entry if available, and otherwise allocate and store a new
one.
Since 5026b47175 (add_reflog_for_walk: avoid memory leak,
2017-05-04), when we hit an error parsing a date-based
reflog spec, we free the reflog memory but leave the cache
entry pointing to the now-freed memory.
We can fix this by just leaving the memory intact once it
has made it into the cache. This may leave an unused entry
in the cache, but that's OK. And it means we also catch a
similar situation: we may not have allocated at all in this
invocation, but simply be pointing to a cached entry from a
previous invocation (which is relying on that entry being
present).
The new test in t1411 exercises this case and fails when run
with --valgrind or ASan.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of the add_reflog_to_walk() function, we keep a
string_list mapping refnames to their reflog contents. This
serves as a cache so that accessing the same reflog twice
requires only a single copy of the log in memory.
The string_list is initialized via xcalloc, meaning its
strdup_strings field is set to 0. But after inserting a
string into the list, we unconditionally call free() on the
string, leaving the list pointing to freed memory. If
another reflog is added (e.g., "git log -g HEAD HEAD"), then
the second one may have unpredictable results.
The extra free was added by 5026b47175 (add_reflog_for_walk:
avoid memory leak, 2017-05-04). Though if you look
carefully, you can see that the code was buggy even before
then. If we tried to read the reflogs by time but came up
with no entries, we exited with an error, freeing the string
in that code path. So the bug was harder to trigger, but
still there.
We can fix it by just asking the string list to make a copy
of the string. Technically we could fix the problem by not
calling free() on our string (and just handing over
ownership to the string list), but there are enough
conditionals that it's quite hard to figure out which code
paths need the free and which do not. Simpler is better
here.
The new test reliably shows the problem when run with
--valgrind or ASAN.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cygwin can use an UNC path like //server/share/repo
$ cd //server/share/dir
$ mkdir test
$ cd test
$ git init --bare
However, when we try to push from a local Git repository to this repo,
there is a problem: Git converts the leading "//" into a single "/".
As cygwin handles an UNC path so well, Git can support them better:
- Introduce cygwin_offset_1st_component() which keeps the leading "//",
similar to what Git for Windows does.
- Move CYGWIN out of the POSIX in the tests for path normalization in t0060
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 39ee4c6c2f (branch: record creation of renamed branch
in HEAD's log, 2017-02-20), a rename on the currently
checked out branch will create two entries in the HEAD
reflog: one where the branch goes away (switching to the
null oid), and one where it comes back (switching away from
the null oid).
This confuses the reflog-walk code. When walking backwards,
it first sees the null oid in the "old" field of the second
entry. Thanks to the "root commit" logic added by 71abeb753f
(reflog: continue walking the reflog past root commits,
2016-06-03), we keep looking for the next entry by scanning
the "new" field from the previous entry. But that field is
also null! We need to go just a tiny bit further, and look
at its "old" field. But with the current code, we decide the
reflog has nothing else to show and just give up. To the
user this looks like the reflog was truncated by the rename
operation, when in fact those entries are still there.
This patch does the absolute minimal fix, which is to look
back that one extra level and keep traversing.
The resulting behavior may not be the _best_ thing to do in
the long run (for example, we show both reflog entries each
with the same commit id), but it's a simple way to fix the
problem without risking further regressions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems to be a little-known feature of `grep` (and it certainly came
as a surprise to this here developer who believed to know the Unix tools
pretty well) that multiple patterns can be passed in the same
command-line argument simply by separating them by newlines. Watch, and
learn:
$ printf '1\n2\n3\n' | grep "$(printf '1\n3\n')"
1
3
That behavior also extends to patterns passed via `-e`, and it is not
modified by passing the option `-E` (but trying this with -P issues the
error "grep: the -P option only supports a single pattern").
It seems that there are more old Unix hands who are surprised by this
behavior, as grep invocations of the form
grep "$(git rev-parse A B) C" file
were introduced in a85b377d04 (push: the beginning of "git push
--signed", 2014-09-12), and later faithfully copy-edited in b9459019bb
(push: heed user.signingkey for signed pushes, 2014-10-22).
Please note that the output of `git rev-parse A B` separates the object
IDs via *newlines*, not via spaces, and those newlines are preserved
because the interpolation is enclosed in double quotes.
As a consequence, these tests try to validate that the file contains
either A's object ID, or B's object ID followed by C, or both. Clearly,
however, what the test wanted to see is that there is a line that
contains all of them.
This is clearly unintended, and the grep invocations in question really
match too many lines.
Fix the test by avoiding the newlines in the patterns.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid running over the end of line -- a C string whose length is not
known to this function -- by using starts_with() instead of memcmp(3)
for checking if it starts with "/dev/null". Also simply include the
newline in the string constant to compare against. Drop a comment that
just states the obvious.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of implementing this on our own, just use a convenience macro.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check that unquote_path() handles spaces and escape sequences
properly.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is what the other routines in Git.pm do if there's an error.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
unquote_path() does not handle quoted paths containing '\a',
even though quote.c::unquote_c_style() does, and quote.c:sq_lookup[]
tells quote.c::sq_must_quote() that '\007' must be quoted as '\a'.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move unquote_path() from git-add--interactive to Git.pm so it can be
used by other scripts. Note this is a straight copy, it does not
handle '\a'. That will be fixed in the next commit.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The helper function utf8_fprintf(fp, ...) has exactly the same
effect to the output stream fp as fprintf(fp, ...) does, and the
only difference is that its return value counts in display columns
consumed (assuming that the payload is encoded in UTF-8), as opposed
to number of bytes.
There is no reason to call it unless the caller cares about its
return value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GNU grep allows "\(A\|B\)" as alternation in BRE, but this is an
extension not understood by some other implementations of grep
(Michael Kebe reported an breakage on Solaris).
Rewrite the offending test to ERE and use egrep instead.
Noticed-by: Michael Kebe <michael.kebe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Defining USE_ASCIIDOCTOR=1 when building Git uses asciidoctor over
asciidoc when generating DocBook and man page documentation. However,
the contrib/subtree module does not presently honour that flag.
This causes a build failure when asciidoc is not present on the build
system. Instead, adapt the main Documentation/Makefile logic to use
asciidoctor when requested.
Signed-off-by: A. Wilcox <AWilcox@Wilcox-Tech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A file can either be added, removed, copied, or renamed, but no two of
these actions can be done by the same patch. Some of these combinations
provoke error messages due to missing file names, and some are only
caught by an assertion. Check git patches already as they are parsed
and report conflicting lines on sight.
Found by Vegard Nossum using AFL.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An empty string as mode specification is accepted silently by git apply,
as Vegard Nossum found out using AFL. It's interpreted as zero. Reject
such bogus file modes, and only accept ones consisting exclusively of
octal digits.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2c93286a (fix "git apply --index ..." not to deref NULL) added a check
for git patches missing a +++ line, preventing a segfault. Check for
missing --- lines as well, and add a test for each case.
Found by Vegard Nossum using AFL.
Original-patch-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The preceding bitmap entries have a 1-byte XOR-offset and 1-byte flags,
so their size is not a multiple of 4. Thus the name-hash cache is only
guaranteed to be 2-byte aligned and so we must use get_be32 rather than
indexing the array directly.
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a few tests to check that both the split-index file and the
shared-index file are created using the right permissions when
core.sharedrepository is set.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the modebits() function can be useful outside t1301,
let's move it into test-lib-functions.sh, and while at
it let's rename it test_modebits().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since f6ecc62dbf (write_shared_index(): use tempfile module, 2015-08-10)
write_shared_index() has been using mks_tempfile() to create the
temporary file that will become the shared index.
But even before that, it looks like the functions used to create this
file didn't call adjust_shared_perm(), which means that the shared
index file has always been created with 600 permissions regardless
of the shared permission settings.
Because of that, on repositories created with `git init --shared=all`
and using the split index feature, one gets an error like:
fatal: .git/sharedindex.a52f910b489bc462f187ab572ba0086f7b5157de: index file open failed: Permission denied
when another user performs any operation that reads the shared index.
Call adjust_shared_perm() on the temporary file created by
mks_tempfile() ourselves to adjust the permission bits.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* sg/revision-parser-skip-prefix:
revision.c: use skip_prefix() in handle_revision_pseudo_opt()
revision.c: use skip_prefix() in handle_revision_opt()
revision.c: stricter parsing of '--early-output'
revision.c: stricter parsing of '--no-{min,max}-parents'
revision.h: turn rev_info.early_output back into an unsigned int
"git stash push <pathspec>" did not work from a subdirectory at all.
Bugfix for a topic in v2.13
* ps/stash-push-pathspec-fix:
git-stash: fix pushing stash with pathspec from subdir
The result from "git diff" that compares two blobs, e.g. "git diff
$commit1:$path $commit2:$path", used to be shown with the full
object name as given on the command line, but it is more natural to
use the $path in the output and use it to look up .gitattributes.
* jk/diff-blob:
diff: use blob path for blob/file diffs
diff: use pending "path" if it is available
diff: use the word "path" instead of "name" for blobs
diff: pass whole pending entry in blobinfo
handle_revision_arg: record paths for pending objects
handle_revision_arg: record modes for "a..b" endpoints
t4063: add tests of direct blob diffs
get_sha1_with_context: dynamically allocate oc->path
get_sha1_with_context: always initialize oc->symlink_path
sha1_name: consistently refer to object_context as "oc"
handle_revision_arg: add handle_dotdot() helper
handle_revision_arg: hoist ".." check out of range parsing
handle_revision_arg: stop using "dotdot" as a generic pointer
handle_revision_arg: simplify commit reference lookups
handle_revision_arg: reset "dotdot" consistently
"git describe --contains" penalized light-weight tags so much that
they were almost never considered. Instead, give them about the
same chance to be considered as an annotated tag that is the same
age as the underlying commit would.
* jc/name-rev-lw-tag:
name-rev: favor describing with tags and use committer date to tiebreak
name-rev: refactor logic to see if a new candidate is a better name
The manual correctly describes the syntax with `auto,` but the
trailing `,` is hard to spot in a terminal. The HTML format does not
have this problem. Adding an example helps both worlds.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Newly added tests to t3420 in this series prepare expected
human-readable output from "git rebase -i" and then compare the
actual output with it. As the output from the command is designed
to go through i18n/l10n, we need to use test_i18ncmp to tell
GETTEXT_POISON build that it is OK the output does not match.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c9d961647 (i18n: add--interactive: mark
edit_hunk_manually message for translation, 2016-12-14),
when the user asks to edit a hunk manually, we respect
core.commentChar in generating the edit instructions.
However, when we then strip out comment lines, we use a
simple regex like:
/^$commentChar/
If your chosen comment character is a regex metacharacter,
then that will behave in a confusing manner ("$", for
instance, would only eliminate blank lines, not actual
comment lines).
We can fix that by telling perl not to respect
metacharacters.
Reported-by: Christian Rösch <christian@croesch.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prompt_yesno function loops indefinitely waiting for a
"y" or "n" response. But it doesn't handle EOF, meaning
that we can end up in an infinite loop of reading EOF from
stdin. One way to simulate that is with:
echo e | GIT_EDITOR='echo corrupt >' git add -p
Let's break out of the loop and propagate the undef to the
caller. Without modifying the callers that effectively turns
it into a "no" response. This is reasonable for both of the
current callers, and it leaves room for any future caller to
check for undef explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When help.autoCorrect is enabled, an invalid git command prints a
warning and a continuation message, which differs depending on
whether or not the value of help.autoCorrect is positive or
negative.
With help.autoCorrect = 15:
WARNING: You called a Git command named 'lgo', which does not exist.
Continuing under the assumption that you meant 'log'
in 1.5 seconds automatically...
With help.autoCorrect < 0:
WARNING: You called a Git command named 'lgo', which does not exist.
Continuing under the assumption that you meant 'log'
The continuation message's phrasing is awkward. This commit cleans it up.
As a bonus, we now use full-sentence strings which make translation easier.
With help.autoCorrect = 15:
WARNING: You called a Git command named 'lgo', which does not exist.
Continuing in 1.5 seconds, assuming that you meant 'log'.
With help.autoCorrect < 0:
WARNING: You called a Git command named 'lgo', which does not exist.
Continuing under the assumption that you meant 'log'.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the indentation from "\t " to "\t". This indenting issue was
introduced when the test was added in commit 1d2f393ac9
("status/commit: show staged submodules regardless of ignore
config", 2014-04-05).
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check the console output when using --autostash and the stash does not
apply is what we expect. The test is quite strict but should catch any
changes to the console output from the various rebase flavors.
Thanks-to: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check the console output when using --autostash and the stash applies
cleanly is what we expect. The test is quite strict but should catch
any changes to the console output from the various rebase flavors.
Thanks-to: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check that the reflog message written to the branch reflog when the
rebase is completed is correct
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rebase messages are printed to stderr traditionally. However due
to a bug introduced in 587947750b (rebase: implement --[no-]autostash
and rebase.autostash, 2013-05-12) which was faithfully copied when
reimplementing parts of the interactive rebase in the sequencer the
autostash messages are printed to stdout instead.
It is time to fix that: let's print the autostash messages to stderr
instead of stdout.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The macOS X fork of Meld[1] requires a "=" in the "--output"
argument, as it uses a wrapper[2] script that munges the
"--output" argument before calling into the common "meld"
script.
The macOS X wrapper script[2] accepts "--output=<filename>"
only, despite the fact that the underlying meld code accepts
both "--output <filename" and "--output=<filename>"[3].
All versions of meld which accept "--output" accept it in
the "--output=<filename>" form, so use "--output=<file>" for
maximum compatibility.
[1] https://github.com/yousseb/meld
[2] https://github.com/yousseb/meld/blob/master/osx/Meld
[3] https://github.com/yousseb/meld/issues/42
Reported-by: Matthew Groth <mgroth49@gmail.com>
Helped-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of discovering the .git/ directory, reading the config and then
trying to painstakingly reset all the global state if we did not find a
matching alias, let's use the early config machinery instead.
It may look like unnecessary work to discover the .git/ directory in the
early config machinery and then call setup_git_directory_gently() in the
case of a shell alias, repeating the very same discovery *again*.
However, we have to do this as the early config machinery takes pains
*not* to touch any global state, while shell aliases expect a possibly
changed working directory and at least the GIT_PREFIX and GIT_DIR
variables to be set.
This change also fixes a known issue where Git tried to read the pager
config from an incorrect path in a subdirectory of a Git worktree if an
alias expanded to a shell command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When expanding aliases, the git_dir is set during the alias expansion
(by virtue of running setup_git_directory_gently()).
This git_dir may be relative to the current working directory, and
indeed often is simply ".git/".
When the alias expands to a shell command, we restore the original
working directory, though, yet we do not reset git_dir.
As a consequence, subsequent read_early_config() runs will mistake the
git_dir to be populated properly and not find the correct config.
Demonstrate this problem by adding a test case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are about to change the way aliases are expanded, to use the early
config machinery.
This machinery reports errors in a slightly different manner than the
cached config machinery.
Let's not get hung up by the precise wording of the message mentioning
the line number. It is really sufficient to verify that all the relevant
information is given to the user.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git has this feature which suggests similar commands (including aliases)
in case the user specified an unknown command.
This feature currently relies on a side effect of the way we expand
aliases right now: when a command is not a builtin, we use the regular
config machinery (meaning: discovering the .git/ directory and
initializing global state such as the config cache) to see whether the
command refers to an alias.
However, we will change the way aliases are expanded in the next
commits, to use the early config instead. That means that the
autocorrect feature can no longer discover the available aliases by
looking at the config cache (because it has not yet been initialized).
So let's just use the early config machinery instead.
This is slightly less performant than the previous way, as the early
config is used *twice*: once to see whether the command refers to an
alias, and then to see what aliases are most similar. However, this is
hardly a performance-critical code path, so performance is less important
here.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When get_value() parses a key/value pair, it is possible that the line
number is decreased (because the \n has been consumed already) before the
key/value pair is passed to the callback function, to allow for the
correct line to be attributed in case of an error.
However, when git_parse_source() asks get_value() to parse the key/value
pair, the error reporting is performed *after* get_value() returns.
Which means that we have to be careful not to increase the line number
in get_value() after the callback function returned an error.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When discovering a .git/ directory, we take pains to ensure that its
repository format version matches Git's expectations, and we return NULL
otherwise.
However, we still appended the invalid path to the strbuf passed as
argument.
Let's just reset the strbuf to the state before we appended the .git/
directory that was eventually rejected.
There is another early return path in that function, when
setup_git_directory_gently_1() returns GIT_DIR_NONE or an error. In that
case, the gitdir parameter has not been touched, therefore there is no
need for an equivalent change in that code path.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff-so-fancy project is also written in perl, and most
of its users pipe diffs through both diff-highlight and
diff-so-fancy. It would be nice if this could be done in a
single script. So let's pull most of diff-highlight's code
into its own module which can be used by diff-so-fancy.
In addition, we'll abstract a few basic items like reading
from stdio so that a script using the module can do more
processing before or after diff-highlight handles the lines.
See the README update for more details.
One small downside is that the diff-highlight script must
now be built using the Makefile. There are ways around this,
but it quickly gets into perl arcana. Let's go with the
simple solution. As a bonus, our Makefile now respects the
PERL_PATH variable if it is set.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b9c6232138 (--format=pretty: avoid calculating expensive expansions
twice) optimized adding short hashes multiple times by using the
fact that the output strbuf was only ever simply appended to and
copying the added string from the previous run. That prerequisite
is no longer given; we now have modfiers like %< and %+ that can
cause the cache to lose track of the correct offsets. Remove it.
Reported-by: Michael Giuffrida <michaelpg@chromium.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When illustrating how to normalize the line endings, the
documentation in gitattributes tells the user to `rm .git/index`.
This is incorrect for two reasons:
- Users shouldn't be instructed to mess around with the internal
implementation of Git using raw file system tools like `rm`.
- Within a submodule or an additional working tree `.git` is just a
file containing a `gitdir: <path>` pointer into the real `.git`
directory. Therefore `rm .git/index` does not work.
The purpose of the `rm .git/index` instruction is to remove all entries
from the index without touching the working tree. The way to do this
with Git is to use `read-tree --empty`.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
perf-test update.
* jh/memihash-opt:
p0004: don't error out if test repo is too small
p0004: don't abort if multi-threaded is too slow
p0004: use test_perf
p0004: avoid using pipes
p0004: simplify calls of test-lazy-init-name-hash
"git pull --rebase --autostash" didn't auto-stash when the local history
fast-forwards to the upstream.
* tb/pull-ff-rebase-autostash:
pull: ff --rebase --autostash works in dirty repo
The timestamp of the index file is now taken after the file is
closed, to help Windows, on which a stale timestamp is reported by
fstat() on a file that is opened for writing and data was written
but not yet closed.
* jh/close-index-before-stat:
read-cache: close index.lock in do_write_index
"git clean -d" used to clean directories that has ignored files,
even though the command should not lose ignored ones without "-x".
"git status --ignored" did not list ignored and untracked files
without "-uall". These have been corrected.
* sl/clean-d-ignored-fix:
clean: teach clean -d to preserve ignored paths
dir: expose cmp_name() and check_contains()
dir: hide untracked contents of untracked dirs
dir: recurse into untracked dirs for ignored files
t7061: status --ignored should search untracked dirs
t7300: clean -d should skip dirs with ignored files
A hotfix to a topic in 'master'.
* dk/send-email-avoid-net-smtp-ssl-when-able:
send-email: Net::SMTP::starttls was introduced in v2.34
send-email: Net::SMTP::SSL is obsolete, use only when necessary
A recent update to t5545-push-options.sh started skipping all the
tests in the script when a web server testing is disabled or
unavailable, not just the ones that require a web server. Non HTTP
tests have been salvaged to always run in this script.
* jc/skip-test-in-the-middle:
t5545: enhance test coverage when no http server is installed
test: allow skipping the remainder
The "run-command" API implementation has been made more robust
against dead-locking in a threaded environment.
* bw/forking-and-threading:
usage.c: drop set_error_handle()
run-command: restrict PATH search to executable files
run-command: expose is_executable function
run-command: block signals between fork and execve
run-command: add note about forking and threading
run-command: handle dup2 and close errors in child
run-command: eliminate calls to error handling functions in child
run-command: don't die in child when duping /dev/null
run-command: prepare child environment before forking
string-list: add string_list_remove function
run-command: use the async-signal-safe execv instead of execvp
run-command: prepare command before forking
t0061: run_command executes scripts without a #! line
t5550: use write_script to generate post-update hook
Introduce the BUG() macro to improve die("BUG: ...").
* jk/bug-to-abort:
usage: add NORETURN to BUG() function definitions
config: complain about --local outside of a git repo
setup_git_env: convert die("BUG") to BUG()
usage.c: add BUG() function
"git checkout --recurse-submodules" did not quite work with a
submodule that itself has submodules.
* sb/checkout-recurse-submodules:
submodule: properly recurse for read-tree and checkout
submodule: avoid auto-discovery in new working tree manipulator code
submodule_move_head: reuse child_process structure for futher commands
Many open source projects use github.com for their contribution process.
Although we mirror the Git core repository to github.com [1] we do not
use any other github.com service. This is unknown/unexpected to a
number of (potential) contributors and consequently they create Pull
Requests against our mirror with their contributions. These Pull
Requests become stale. This is frustrating to them as they think we
ignore them and it is also unsatisfactory for us as we miss potential
code improvements and/or new contributors.
GitHub contribution guidelines and a GitHub Pull Request template that
is visible to every Pull Request creator can be configured with special
files in a Git repository [2]. Let's make use of this!
[1] https://github.com/git/git
[2] https://help.github.com/articles/creating-a-pull-request-template-for-your-repository/
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git stash push` command recently gained the ability to get a
pathspec as its argument to only stash matching files. Calling this
command from a subdirectory does not work, though, as one of the first
things we do is changing to the top level directory without keeping
track of the prefix from which the command is being run.
Fix the shortcoming by storing the prefix previous to the call to
`cd_to_toplevel` and then subsequently using `git rev-parse --prefix` to
correctly resolve the pathspec. Add a test to catch future breakage of
this usecase.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test for the case when only one parameter is passed to '-m'
(move/rename) option.
For example - if 'git branch -m bbb' is run while checked out on aaa
branch, it should rename the currently checked out branch to bbb.
There was no test for this particular case with only one parameter
for -m option. However, there's one similar test case for -M option.
Add test for making sure HEAD points to the bbb (new branch name). Also
add a test for making sure the reflog that is moved to 'bbb' retains
entries created for the currently checked out branch. Note that since
the topmost entry on reflog for bbb will be about branch creation, we
compare bbb@{1} (instead of bbb@{0}) with aaa@{0} to make sure the
reflog for bbb retains entries from aaa.
Signed-off-by: Sahil Dua <sahildua2305@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parsing of '--early-output' with or without its optional integer
argument allowed bogus options like '--early-output-foobarbaz' to slip
through and be ignored.
Fix it by parsing '--early-output' in the same way as other options
with an optional argument are parsed. Furthermore, use strtoul_ui()
to parse the optional integer argument and to refuse negative numbers.
While at it, use skip_prefix() instead of starts_with() and magic
numbers.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two options are parsed using starts_with(), allowing things like
'git log --no-min-parents-foobarbaz' to succeed.
Use strcmp() instead.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rev_info.early_output started out as an unsigned int in cdcefbc97 (Add
"--early-output" log flag for interactive GUI use, 2007-11-03), but
later it was turned into a single bit in a bit field in cc243c3ce
(show: --ignore-missing, 2011-05-18) without explanation, though the
code using it still expects it to be a regular integer type and uses
it as a counter. Consequently, any even number given via
'--early-output=<N>', or indeed a plain '--early-output' defaulting to
100 effectively disabled the feature.
Turn rev_info.early_output back into its origin unsigned int data
type, making '--early-output' work again.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some more simple mailinfo tests including a few that
produce:
fatal: `pos + len' is too far after the end of the buffer
Mark those as 'test_expect_failure'.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use modern style in the test t4005. Remove hard coded sha1 values.
Combine test prep work and the actual test. Rename the first
test to contain the word "setup".
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The upstream sha1dc code indents some lines with spaces.
While this doesn't match Git's coding guidelines, it's better
to leave this imported code untouched than to try to make it
match our style. However, we can use .gitattributes to tell
"diff --check" and "git am" not to bother us about it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a1283866b (t5313: test bounds-checks of
corrupted/malicious pack/idx files, 2016-02-25) added a test
that requires our corrupted pack index to have two objects.
The entry for the first one remains untouched, but we
corrupt the entry for second one. Since the index stores the
entries in sha1-sorted order, this means that the test must
make sure that the sha1 of the object we expect to be
corrupted ("$object") sorts after the other placeholder
object.
That commit used the HEAD commit as the placeholder, but the
script never calls test_tick. That means that the commit
object (and thus its sha1) depends on the timestamp when the
test script is run. This usually works in practice, because
the sha1 of $object starts with "fff". The commit object
will sort after that only 1 in 4096 times, but when it does
the test will fail.
One obvious solution is to add the test_tick call to get a
deterministic commit sha1. But since we're relying on the
sort order for the test to function, let's make that very
explicit by just generating a second blob with a known sha1.
Reported-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interaction of "url.*.insteadOf" and custom URL scheme's
whitelisting is now documented better.
* jk/url-insteadof-config:
docs/config: mention protocol implications of url.insteadOf
The "collision detecting" SHA-1 implementation shipped with 2.13
was quite broken on some big-endian platforms and/or platforms that
do not like unaligned fetches. Update to the upstream code which
has already fixed these issues.
* ab/sha1dc-maint:
sha1dc: update from upstream
"foo\bar\baz" in "git fetch foo\bar\baz", even though there is no
slashes in it, cannot be a nickname for a remote on Windows, as
that is likely to be a pathname on a local filesystem.
* js/bs-is-a-dir-sep-on-windows:
Windows: do not treat a path with backslashes as a remote's nick name
mingw.h: permit arguments with side effects for is_dir_sep
A test allowed both "git push" and "git receive-pack" on the other
end write their traces into the same file. This is OK on platforms
that allows atomically appending to a file opened with O_APPEND,
but on other platforms led to a mangled output, causing
intermittent test failures. This has been fixed by disabling
traces from "receive-pack" in the test.
* jk/alternate-ref-optim:
t5400: avoid concurrent writes into a trace file
"git interpret-trailers", when used as GIT_EDITOR for "git commit
-v", looked for and appended to a trailer block at the very end,
i.e. at the end of the "diff" output. The command has been
corrected to pay attention to the cut-mark line "commit -v" adds to
the buffer---the real trailer block should appear just before it.
* bm/interpret-trailers-cut-line-is-eom:
interpret-trailers: honor the cut line
"git for-each-ref --format=..." with %(HEAD) in the format used to
resolve the HEAD symref as many times as it had processed refs,
which was wasteful, and "git branch" shared the same problem.
* kn/ref-filter-branch-list:
ref-filter: resolve HEAD when parsing %(HEAD) atom
A few codepaths in "checkout" and "am" working on an unborn branch
tried to access an uninitialized piece of memory.
* rs/checkout-am-fix-unborn:
am: check return value of resolve_refdup before using hash
checkout: check return value of resolve_refdup before using hash
"git clone --config var=val" is a way to populate the
per-repository configuration file of the new repository, but it did
not work well when val is an empty string. This has been fixed.
* jn/clone-add-empty-config-from-command-line:
clone: handle empty config values in -c
Update the C style recommendation for notes for translators, as
recent versions of gettext tools can work with our style of
multi-line comments.
* ab/c-translators-comment-style:
C style: use standard style for "TRANSLATORS" comments
Travis CI gained a task to format the documentation with both
AsciiDoc and AsciiDoctor.
* ls/travis-doc-asciidoctor:
travis-ci: check AsciiDoc/AsciiDoctor stderr output
travis-ci: unset compiler for jobs that do not need one
travis-ci: parallelize documentation build
travis-ci: build documentation with AsciiDoc and Asciidoctor
Since 3ccd681c2a (Merge branch 'sb/submodule-rm-absorb', 2017-01-18)
git-rm tries to absorb any submodules git dir before deleting the
submodule. Correct the documentation to say so.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cherry-pick" and other uses of the sequencer machinery
mishandled a trailer block whose last line is an incomplete line.
This has been fixed so that an additional sign-off etc. are added
after completing the existing incomplete line.
* jt/use-trailer-api-in-commands:
sequencer: add newline before adding footers
The receive-pack program now makes sure that the push certificate
records the same set of push options used for pushing.
* jt/push-options-doc:
receive-pack: verify push options in cert
docs: correct receive.advertisePushOptions default
Make sure our tests would pass when the sources are checked out
with "platform native" line ending convention by default on
Windows. Some "text" files out tests use and the test scripts
themselves that are meant to be run with /bin/sh, ought to be
checked out with eol=LF even on Windows.
* js/eol-on-ourselves:
t4051: mark supporting files as requiring LF-only line endings
Fix the remaining tests that failed with core.autocrlf=true
t3901: move supporting files into t/t3901/
completion: mark bash script as LF-only
git-new-workdir: mark script as LF-only
Fix build with core.autocrlf=true
A few http:// links that are redirected to https:// in the
documentation have been updated to https:// links.
* jk/update-links-in-docs:
doc: use https links to Wikipedia to avoid http redirects
Tag objects, which are not reachable from any ref, that point at
missing objects were mishandled by "git gc" and friends (they
should silently be ignored instead)
* jk/ignore-broken-tags-when-ignoring-missing-links:
revision.c: ignore broken tags with ignore_missing_links
Clarify documentation for include.path and includeIf.<condition>.path
configuration variables.
* jk/doc-config-include:
docs/config: consistify include.path examples
docs/config: avoid the term "expand" for includes
docs/config: give a relative includeIf example
docs/config: clarify include/includeIf relationship
"pack-objects" can stream a slice of an existing packfile out when
the pack bitmap can tell that the reachable objects are all needed
in the output, without inspecting individual objects. This
strategy however would not work well when "--local" and other
options are in use, and need to be disabled.
* jk/disable-pack-reuse-when-broken:
t5310: fix "; do" style
pack-objects: disable pack reuse for object-selection options
The codepath in "git am" that is used when running "git rebase"
leaked memory held for the log message of the commits being rebased.
* jk/am-leakfix:
am: shorten ident_split variable name in get_commit_info()
am: simplify allocations in get_commit_info()
am: fix commit buffer leak in get_commit_info()
"git read-tree -m" (no tree-ish) gave a nonsense suggestion "use
--empty if you want to clear the index". With "-m", such a request
will still fail anyway, as you'd need to name at least one tree-ish
to be merged.
* jc/read-tree-empty-with-m:
read-tree: "read-tree -m --empty" does not make sense
Git sometimes gives an advice in a rhetorical question that does
not require an answer, which can confuse new users and non native
speakers. Attempt to rephrase them.
* ja/do-not-ask-needless-questions:
git-filter-branch: be more direct in an error message
read-tree -m: make error message for merging 0 trees less smart aleck
usability: don't ask questions if no reply is required
Setting "log.decorate=false" in the configuration file did not take
effect in v2.13, which has been corrected.
* ah/log-decorate-default-to-auto:
builtin/log: honor log.decorate
Update tests to pass under GETTEXT_POISON (a mechanism to ensure
that output strings that should not be translated are not
translated by mistake), and tell TravisCI to run them.
* ab/fix-poison-tests:
travis-ci: add job to run tests with GETTEXT_POISON
travis-ci: setup "prove cache" in "script" step
tests: fix tests broken under GETTEXT_POISON=YesPlease
The Web interface to gmane news archive is long gone, even though
the articles are still accessible via NTTP. Replace the links with
ones to public-inbox.org. Because their message identification is
based on the actual message-id, it is likely that it will be easier
to migrate away from it if/when necessary.
* ab/doc-replace-gmane-links:
doc: replace more gmane links
doc: replace a couple of broken gmane links
Just the first one of three? new tests that follows up a regression
fix.
* pw/rebase-i-regression-fix:
rebase -i: add missing newline to end of message
rebase -i: silence stash apply
rebase -i: fix reflog message
When compiling the documentation, asciidoc thinks a backtick surrounded
by whitespace shouldn't be interpreted as marking the start or end of a
literal. In most cases, that's useful behaviour, but in the git-pull
documentation it means asciidoc is failing to correctly detect which
text should be monospaced and which shouldn't.
To avoid this, remove the extraneous spaces from the text to be
monospaced. It would also be possible to fix the formatting by
switching to asciidoc's ++ monospace format markers and still have the
space characters included in the monospace text, but the spaces aren't
necessary and not having them keeps the markup simpler.
Also include a minor grammar fix suggested by Jeff while we're changing
these lines.
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git pull --rebase --autostash` in a dirty repository resulted in a
fast-forward, nothing was being autostashed and the pull failed. This
was due to a shortcut to avoid running rebase when we can fast-forward,
but autostash is ignored on that codepath.
Now we will only take the shortcut if autostash is not in effect.
Based on a few tests against the git.git repo, the shortcut does not
seem to give us significant performance benefits, on Linux at least.
Regardless, it is more important to be correct than to be fast.
Signed-off-by: Tyler Brazier <tyler@tylerbrazier.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We cannot rely on the starttls method being present in Net::SMTP until
c274b798e6881a941d941808c6d89966975cb8c8 (Merge branch 'ipv6_ssl' of
https://github.com/noxxi/perl-libnet into noxxi-ipv6_ssl, 2014-06-02),
which set the module version to 2.34.
This version was first shipped as part of perl in v5.21.5~169 (Update
libnet to CPAN version 3.01, 2014-10-10).
Noticed on an Ubuntu system with perl 5.18.2-2ubuntu1.1, which
provides Net::SMTP version 2.31. The error message is
Can't locate object method "starttls" via package "Net::SMTP" at /usr/lib/git-core/git-send-email line 1410.
Reported-by: Brandon Williams <bmwill@google.com>
Reported-and-tested-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git rev-parse --short` is not a generic modifier but just a variant
of `--verify` and considers the given length only as a suggestion to
ensure uniqueness.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a URL rewrite switches the protocol to something
nonstandard (like "persistent-https" for "https"), the user
may be bitten by the fact that the default protocol
restrictions are different between the two. Let's drop a
note in insteadOf that points the user in the right
direction.
It would be nice if we could make this work out of the box,
but we can't without knowing the security implications of
the user's rewrite. Only the documentation for a particular
remote helper can advise one way or the other. Since we do
include the persistent-https helper in contrib/ (and since
it was the helper in the real-world case that inspired that
patch), let's also drop a note there.
Suggested-by: Elliott Cable <me@ell.io>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have free_refspec(), a public function which does
the same thing as the static free_refspecs(). Let's just
keep one. There are two minor differences between the
functions:
1. free_refspecs() is a noop when the refspec argument is
NULL. This probably doesn't matter in practice. The
nr_refspec parameter would presumably be 0 in that
case, skipping the loop. And free(NULL) is explicitly
OK. But it doesn't hurt for us to port this extra
safety to free_refspec(), as one of the callers passes
a funny "i+1" count.
2. The order of arguments is reversed between the two
functions. This patch uses the already-public order of
free_refspec(), as it matches the argument order on the
parsing side.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change all the "TRANSLATORS: [...]" comments in the C code to use the
regular Git coding style, and amend the style guide so that the
example there uses that style.
This custom style was necessary back in 2010 when the gettext support
was initially added, and was subsequently documented in commit
cbcfd4e3ea ("i18n: mention "TRANSLATORS:" marker in
Documentation/CodingGuidelines", 2014-04-18).
GNU xgettext hasn't had the parsing limitation that necessitated this
exception for almost 3 years. Since its 0.19 release on 2014-06-02
it's been able to recognize TRANSLATOR comments in the standard Git
comment syntax[1].
Usually we'd like to keep compatibility with software that's that
young, but in this case literally the only person who needs to be
using a gettext newer than 3 years old is Jiang Xin (the only person
who runs & commits "make pot" results), so I think in this case we can
make an exception.
This xgettext parsing feature was added after a thread on the Git
mailing list[2] which continued on the bug-gettext[3] list, but we
never subsequently changed our style & styleguide, do so.
There are already longstanding changes in git that use the standard
comment style & have their TRANSLATORS comments extracted properly
without getting the literal "*"'s mixed up in the text, as would
happen before xgettext 0.19.
Commit 7ff2683253 ("builtin-am: implement -i/--interactive",
2015-08-04) added one such comment, which in commit df0617bfa7 ("l10n:
git.pot: v2.6.0 round 1 (123 new, 41 removed)", 2015-09-05) got picked
up in the po/git.pot file with the right format, showing that Jiang
already runs a modern xgettext.
The xgettext parser does not handle the sort of non-standard comment
style that I'm amending here in sequencer.c, but that isn't standard
Git comment syntax anyway. With this change to sequencer.c & "make
pot" the comment in the pot file is now correct:
#. TRANSLATORS: %s will be "revert", "cherry-pick" or
-#. * "rebase -i".
+#. "rebase -i".
1. http://git.savannah.gnu.org/cgit/gettext.git/commit/?id=10af7fe6bd
2. <2ce9ec406501d112e032c8208417f8100bed04c6.1397712142.git.worldhello.net@gmail.com>
(https://public-inbox.org/git/2ce9ec406501d112e032c8208417f8100bed04c6.1397712142.git.worldhello.net@gmail.com/)
3. https://lists.gnu.org/archive/html/bug-gettext/2014-04/msg00016.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user provides "-h" on the command line, then our
parse_options() invocation will show a usage message and
quit. But if "-h" is the only argument, the git wrapper
behaves specially: it ignores our RUN_SETUP flag and calls
cmd_am() without having done repository setup at all. This
is due to 99caeed05 (Let 'git <command> -h' show usage
without a git dir, 2009-11-09).
Before cmd_am() calls parse_options(), though, it runs a few
other setup functions. One of these is am_state_init(),
which uses git_pathdup() to set up the default rebase-apply
path. But calling git_pathdup() when we haven't done
repository setup will fall back to using ".git". That's
mostly harmless (since we won't use the value anyway), but
is forbidden since b1ef400eec ("setup_git_env: avoid blind
fall-back to ".git"", 2016-10-20), and we now BUG().
We can't easily move that setup to after the parse_options()
call; the point is to set up defaults that are overwritten
by the option parsing. Instead, we'll detect the "-h" case
early and show the usage then. This matches the behavior of
other builtins which have a similar setup-ordering issue
(e.g., git-branch).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes the test by changing "branch.s/s/dummy" to "branch.s/s.dummy" which is
the right way of accessing config key "branch.s/s.dummy". Purpose of
this test is to confirm that this key doesn't exist after the branch
"s/s" has been renamed to "s".
Earlier it was trying to access invalid config key and hence was getting
an error. However, this wasn't caught because we were expecting the
command to fail for other reason as mentioned above.
Signed-off-by: Sahil Dua <sahildua2305@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a test line that's exactly the same as the preceding
line.
This was brought in in commit feabcc173b ("Integrate wildmatch to
git", 2012-10-15), these tests are originally copied from rsync.git,
but the duplicate line was never present there, so must have just
snuck in during integration with git by accident.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `set_ident` in `filter-branch` exported the variables
GIT_(AUTHOR|COMMITTER)_(NAME|EMAIL|DATE) at least since 6f6826c52b in 2007.
Therefore the filter scripts don't need to re-eport them again.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we successfully parse a symref value like
"HEAD:refs/heads/master", we add the result to a string
list. But because the string list is marked
STRING_LIST_INIT_DUP, the string list code will make a copy
of the string and add the copy.
This patch fixes it by adding the entry with
string_list_append_nodup(), which lets the string list take
ownership of our newly allocated string. There are two
alternatives that seem like they would work, but aren't the
right solution.
The first is to initialize the list with the "NODUP"
initializer. That would avoid the copy, but then the string
list would not realize that it owns the strings. When we
eventually call string_list_clear(), it would not free the
strings, causing a leak.
The second option would be to use the normal
string_list_append(), but free the local copy in our
function. We can't do this because the local copy actually
contains _two_ strings; the symref name and its target. We
point to the target pointer via the "util" field, and its
memory must last as long as the string list does.
You may also wonder whether it's safe to ever free the local
copy, since the target points into it. The answer is yes,
because we duplicate it in annotaate_refs_with_symref_info
before clearing the string list.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, the remote repository name in, e.g., `git fetch foo\bar`
is clearly not a nickname for a configured remote repository. However,
the function valid_remote_nick() does not account for backslashes.
Use is_dir_sep() to check for both slashes and backslashes on Windows.
This was discovered while playing with Duy's patches that warn after
fopen() failures. The functions that read the branches and remotes
files are protected by a valid_remote_nick() check. Without this
change, a Windows style absolute path is incorrectly regarded as
nickname and is concatenated to a prefix and used with fopen(). This
triggers warnings because a colon in a path name is not allowed:
C:\Temp\gittest>git fetch C:\Temp\gittest
warning: unable to access '.git/remotes/C:\Temp\gittest': Invalid argument
warning: unable to access '.git/branches/C:\Temp\gittest': Invalid argument
From C:\Temp\gittest
* branch HEAD -> FETCH_HEAD
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we diff a blob against a working tree file like:
git diff HEAD:Makefile Makefile
we always use the working tree filename for both sides of
the diff. In most cases that's fine, as the two would be the
same anyway, as above. And until recently, we used the
"name" for the blob, not the path, which would have the
messy "HEAD:" on the beginning.
But when they don't match, like:
git diff HEAD:old_path new_path
it makes sense to show both names.
This patch uses the blob's path field if it's available, and
otherwise falls back to using the filename (in preference to
the blob's name, which is likely to be garbage like a raw
sha1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's a subtle distinction between "name" and "path" for a
blob that we resolve: the name is what the user told us on
the command line, and the path is what we traversed when
finding the blob within a tree (if we did so).
When we diff blobs directly, we use "name", but "path" is
more likely to be useful to the user (it will find the
correct .gitattributes, and give them a saner diff header).
We still have to fall back to using the name for some cases
(i.e., any blob reference that isn't of the form tree:path).
That's the best we can do in such a case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The stuff_change() function makes diff_filespecs out of
blobs. The term we generally use for filespecs is "path",
not "name", so let's be consistent here. That will make
things less confusing when the next patch starts caring
about the path/name distinction inside the pending object
array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When diffing blobs directly, git-diff picks the blobs out of
the rev_info's pending array and copies the relevant bits to
a custom "struct blobinfo". But the pending array entry
already has all of this information (and more, which we'll
use in future patches). Let's just pass the original entry
instead.
In practice, these two blobs are probably adjacent in the
revs->pending array, and we could just pass the whole array.
But the current code is careful to pick each blob out
separately and put it into another array, so we'll continue
to do so and make our own array-of-pointers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the revision parser sees an argument like tree:path, we
parse it down to the correct blob (or tree), but throw away
the "path" portion. Let's ask get_sha1_with_context() to
record it, and pass it along in the pending array.
This will let programs like git-diff which rely on the
revision-parser show more accurate paths.
Note that the implementation is a little tricky; we have to
make sure we free oc.path in all code paths. For handle_dotdot(),
we can piggy-back on the existing cleanup-wrapper pattern.
The real work happens in handle_dotdot_1(), but the
handle_dotdot() wrapper makes sure that the path is freed no
matter how we exit the function (and for that reason we make
sure that the object_context struct is zero'd, so if we fail
to even get to the get_sha1_with_context() call, we just end
up calling free(NULL)).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "a..b" revision syntax was designed to handle commits,
so it doesn't bother to record any mode we find while
traversing a "tree:path" endpoint. These days "git diff" can
diff blobs using either "a:path..b:path" (with dots) or
"a:path b:path" (without), but the two behave
inconsistently, as the with-dots version fails to notice the
mode.
Let's teach the dot-dot range parser to record modes; it
doesn't cost us anything, and it makes this case work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-diff command can directly compare two blobs (or a
blob and a file), but we don't test this at all. Let's add
some basic tests that reveal a few problems.
There are basically four interesting inputs:
1. sha1 against sha1 (where diff has no information beyond
the contents)
2. tree:path against tree:path (where it can get
information via get_sha1_with_context)
3. Same as (2), but using the ".." range syntax
4. tree:path against a filename
And beyond generating a sane diff, we care about a few
little bits: which paths they show in the diff header, and
whether they correctly pick up a mode change.
They should all be able to show a mode except for (1),
though note that case (3) is currently broken.
For the headers, we would ideally show the path within the
tree if we have it, making:
git diff a:path b:path
look the same as:
git diff a b -- path
We can't always do that (e.g., in the direct sha1/sha1 diff,
we have no path to show), in which case we should fall back
to the name that resolved to the blob (which is nonsense
from the repository's perspective, but is the best we can
do).
Aside from the fallback case in (1), none of the cases get
this right. Cases (2) and (3) always show the full
tree:path, even though we should be able to know just the
"path" portion.
Case (4) picks up the filename path, but assigns it to
_both_ sides of the diff. So this works for:
git diff tree:path path
but not for:
git diff tree:other_path path
The appropriate tests are marked to expect failure.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a sha1 lookup returns the tree path via "struct
object_context", it just copies it into a fixed-size buffer.
This means the result can be truncated, and it means our
"struct object_context" consumes a lot of stack space.
Instead, let's allocate a string on the heap. Because most
callers don't care about this information, we'll avoid doing
it by default (so they don't all have to start calling
free() on the result). There are basically two options for
the caller to signal to us that it's interested:
1. By setting a pointer to storage in the object_context.
2. By passing a flag in another parameter.
Doing (1) would match the way that sha1_object_info_extended()
works. But it would mean that every caller would have to
initialize the object_context, which they don't currently
have to do.
This patch does (2), and adds a new bit to the function's
flags field. All of the callers that look at the "path"
field are updated to pass the new flag.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_sha1_with_context() function zeroes out the
oc->symlink_path strbuf, but doesn't use strbuf_init() to
set up the usual invariants (like pointing to the slopbuf).
We don't actually write to the oc->symlink_path strbuf
unless we call get_tree_entry_follow_symlinks(), and that
function does initialize it. However, readers may still look
at the zero'd strbuf.
In practice this isn't a triggerable bug. The only caller
that looks at it only does so when the mode we found is 0.
This doesn't happen for non-tree-entries (where we return
S_IFINVALID). A broken tree entry could have a mode of 0,
but canon_mode() quietly rewrites that into S_IFGITLINK.
So the "0" mode should only come up when we did indeed find
a symlink.
This is mostly just an accident of how the code happens to
work, though. Let's future-proof ourselves to make sure the
strbuf is properly initialized for all calls (it's only a
few struct member assignments, not a heap allocation).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An early version of the patch to add object_context used the
name object_resolve_context. This was later shortened to
just object_context, but the "orc" variable name stuck in a
few places. Let's use "oc", which is used elsewhere in the
code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The handle_revision_arg function is rather long, and a big
chunk of it is handling the range operators. Let's pull that
out to a separate helper. While we're doing so, we can clean
up a few of the rough edges that made the flow hard to
follow:
- instead of manually restoring *dotdot (that we overwrote
with a NUL), do the real work in a sub-helper, which
makes it clear that the munge/restore lines are a
matched pair
- eliminate a goto which wasn't actually used for control
flow, but only to avoid duplicating a few lines
(instead, those lines are pushed into another helper
function)
- use early returns instead of deep nesting
- consistently name all variables for the left-hand side
of the range as "a" (rather than "this" or "from") and
the right-hand side as "b" (rather than "next", or using
the unadorned "sha1" or "flags" from the main function).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 003c84f6d (specifying ranges: we did not mean to make
".." an empty set, 2011-05-02), we treat the argument ".."
specially. We detect it by noticing that both sides of the
range are empty, and that this is a non-symmetric two-dot
range.
While correct, this makes the code overly complicated. We
can just detect ".." up front before we try to do further
parsing. This avoids having to de-munge the NUL from dotdot,
and lets us eliminate an extra const array (which we needed
only to do direct pointer comparisons).
It also removes the one code path from the range-parsing
conditional that requires us to return -1. That will make it
simpler to pull the dotdot parsing out into its own
function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The handle_revision_arg() function has a "dotdot" variable
that it uses to find a ".." or "..." in the argument. If we
don't find one, we look for other marks, like "^!". But we
just keep re-using the "dotdot" variable, which is
confusing.
Let's introduce a separate "mark" variable that can be used
for these other marks. They still reuse the same variable,
but at least the name is no longer actively misleading.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "dotdot" range parser avoids calling
lookup_commit_reference() if we are directly fed two
commits. But its casts are unnecessarily complex; that
function will just return a commit we pass into it.
Just calling the function all the time is much simpler, and
doesn't do any significant extra work (the object is already
parsed, and deref_tag() on a non-tag is a noop; we do incur
one extra lookup_object() call, but that's fairly trivial).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are parsing a range like "a..b", we write a
temporary NUL over the first ".", so that we can access the
names "a" and "b" as C strings. But our restoration of the
original "." is done at inconsistent times, which can lead
to confusing results.
For most calls, we restore the "." after we resolve the
names, but before we call verify_non_filename(). This means
that when we later call add_pending_object(), the name for
the left-hand "a" has been re-expanded to "a..b". You can
see this with:
git log --source a...b
where "b" will be correctly marked with "b", but "a" will be
marked with "a...b". Likewise with "a..b" (though you need
to use --boundary to even see "a" at all in that case).
To top off the confusion, when the REVARG_CANNOT_BE_FILENAME
flag is set, we skip the non-filename check, and leave the
NUL in place.
That means we do report the correct name for "a" in the
pending array. But some code paths try to show the whole
"a...b" name in error messages, and these erroneously show
only "a" instead of "a...b". E.g.:
$ git cherry-pick HEAD:foo...HEAD:foo
error: object d95f3ad14dee633a758d2e331151e950dd13e4ed is a blob, not a commit
error: object d95f3ad14dee633a758d2e331151e950dd13e4ed is a blob, not a commit
fatal: Invalid symmetric difference expression HEAD:foo
(That last message should be "HEAD:foo...HEAD:foo"; I used
cherry-pick because it passes the CANNOT_BE_FILENAME flag).
As an interesting side note, cherry-pick actually looks at
and re-resolves the arguments from the pending->name fields.
So it would have been visibly broken by the first bug, but
the effect was canceled out by the second one.
This patch makes the whole function consistent by re-writing
the NUL immediately after calling verify_non_filename(), and
then restoring the "." as appropriate in some error-printing
and early-return code paths.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is an implicit assumption that a directory containing only
untracked and ignored paths should itself be considered untracked. This
makes sense in use cases where we're asking if a directory should be
added to the git database, but not when we're asking if a directory can
be safely removed from the working tree; as a result, clean -d would
assume that an "untracked" directory containing ignored paths could be
deleted, even though doing so would also remove the ignored paths.
To get around this, we teach clean -d to collect ignored paths and skip
an untracked directory if it contained an ignored path, instead just
removing the untracked contents thereof. To achieve this, cmd_clean()
has to collect all untracked contents of untracked directories, in
addition to all ignored paths, to determine which untracked dirs must be
skipped (because they contain ignored paths) and which ones should *not*
be skipped.
For this purpose, correct_untracked_entries() is introduced to prune a
given dir_struct of untracked entries containing ignored paths and those
untracked entries encompassed by the untracked entries which are not
pruned away.
A memory leak is also fixed in cmd_clean().
This also fixes the known breakage in t7300, since clean -d now skips
untracked directories containing ignored paths.
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a duplicate mention of --contains in the SYNOPSIS to mention
--no-contains.
This fixes an error introduced in my commit ac3f5a3468 ("ref-filter:
add --no-contains option to tag/branch/for-each-ref", 2017-03-24).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taking git-compat-util.h's cue (which uses an inline function to back
is_dir_sep()), let's use an inline function to back also the Windows
version of is_dir_sep(). This avoids problems when calling the function
with arguments that do more than just provide a single character, e.g.
incrementing a pointer. Example:
is_dir_sep(*p++)
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The manual for "git interpret-trailers" mentioned a non-existing
literal `overwrite` for its config option `trailer.ifexists`. The
correct name for that choice is `replace`.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of the test was not enclosed in single quotes, which
broke the coloring scheme that I am used to. Upon closer inspection
the test is good, but the description is a bit vague. So extend the
description of the first test.
While at it align the description of the file to match what we actually
test in the file.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to use cmp_name() and check_contains() (which both compare
`struct dir_entry`s, the former in terms of the sort order, the latter
in terms of whether one lexically contains another) outside of dir.c,
so we have to (1) change their linkage and (2) rename them as
appropriate for the global namespace. The second is achieved by
renaming cmp_name() to cmp_dir_entry() and check_contains() to
check_dir_entry_contains().
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we taught read_directory_recursive() to recurse into untracked
directories in search of ignored files given DIR_SHOW_IGNORED_TOO, that
had the side effect of teaching it to collect the untracked contents of
untracked directories. It doesn't always make sense to return these,
though (we do need them for `clean -d`), so we introduce a flag
(DIR_KEEP_UNTRACKED_CONTENTS) to control whether or not read_directory()
strips dir->entries of the untracked contents of untracked dirs.
We also introduce check_contains() to check if one dir_entry corresponds
to a path which contains the path corresponding to another dir_entry.
This also fixes known breakages in t7061, since status --ignored now
searches untracked directories for ignored files.
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We consider directories containing only untracked and ignored files to
be themselves untracked, which in the usual case means we don't have to
search these directories. This is problematic when we want to collect
ignored files with DIR_SHOW_IGNORED_TOO, though, so we teach
read_directory_recursive() to recurse into untracked directories to find
the ignored files they contain when DIR_SHOW_IGNORED_TOO is set. This
has the side effect of also collecting all untracked files in untracked
directories as well.
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Per eb8c5b87, `status --ignored` by design does not list ignored files
if they are in a directory which contains only ignored and untracked
files (which is itself considered to be untracked) without `-uall`. This
does not make sense for `--ignored`, which claims to "Show ignored files
as well."
Thus we revisit eb8c5b87 and decide that for such directories, `status
--ignored` will list the directory as untracked *and* list all ignored
files within said directory even without `-uall`.
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If git sees a directory which contains only untracked and ignored
files, clean -d should not remove that directory. It was recently
discovered that this is *not* true of git clean -d, and it's possible
that this has never worked correctly; this test and its accompanying
patch series aims to fix that.
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d8193743e0 ("usage.c: add BUG() function", 12-05-2017) added the
BUG() functions and macros as a replacement for calls to die("BUG: ..").
The use of NORETURN on the declarations (in git-compat-util.h) and the
lack of NORETURN on the function definitions, however, leads sparse to
complain thus:
SP usage.c
usage.c:220:6: error: symbol 'BUG_fl' redeclared with different type
(originally declared at git-compat-util.h:1074) - different modifiers
In order to suppress the sparse error, add the NORETURN to the function
definitions.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update sha1dc from the latest version by the upstream
maintainer[1].
This version includes a commit of mine which allows for replacing the
local modifications done to the upstream files in git.git with macro
definitions to monkeypatch it in place.
It also brings in a change[2] upstream made for the breakage 2.13.0
introduced on SPARC and other platforms that forbid unaligned
access[3].
This means that the code customizations done since the initial import
in commit 28dc98e343 ("sha1dc: add collision-detecting sha1
implementation", 2017-03-16) can be done purely via Makefile
definitions and by including the content of our own sha1dc_git.[ch] in
sha1dc/sha1.c via a macro.
1. cc465543b3
2. 33a694a9ee
3. "Git 2.13.0 segfaults on Solaris SPARC due to DC_SHA1=YesPlease
being on by default"
(https://public-inbox.org/git/CACBZZX6nmKK8af0-UpjCKWV4R+hV-uk2xWXVA5U+_UQ3VXU03g@mail.gmail.com/)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Net::SMTP itself can do the necessary SSL and STARTTLS bits just fine
since version 1.28, and Net::SMTP::SSL is now deprecated. Since 1.28
isn't that old yet, keep the old code in place and use it when
necessary.
While we're in the area, mark some messages for translation that were
not yet marked as such.
Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When peeling a tag for prepare_revision_walk(), we do not
respect the ignore_missing_links flag. This can lead to a
bogus error when pack-objects walks the possibly-broken
unreachable-but-recent part of the object graph.
The other link-following all happens via traverse_commit_list(),
which explains why this case was missed. And our tests
covered only broken links from commits. Let's be more
comprehensive and cover broken tree entries (which do work)
and tags (which shows off this bug).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration variable log.showSignature is mentioned in git-log's
manpage. Document it in git-config's manpage as well.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell version of rebase -i silences the status output from 'git
stash apply' when restoring the autostashed changes. The C version
does not.
Having the output from git stash apply on the screen is
distracting as it makes it difficult to find the message from git
rebase saying that the rebase succeeded. Also the status information
that git stash prints talks about looking in .git/rebase-merge/done to
see which commits have been applied. As .git/rebase-merge is removed
shortly after the message is printed before rebase -i exits this is
confusing.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebase -i was converted to C a bug was introduced into the code
that creates the reflog message. Instead of saying
rebase -i (finish): <head-name> onto <onto>
it says
rebase -i (finish): <head-name> onto <orig-head><onto>
as the strbuf is not reset between reading the value of <orig-head>
and <onto>.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user asks to display (or sort by) the %(HEAD) atom,
ref-filter has to compare each refname to the value of HEAD.
We do so by resolving HEAD fresh when calling populate_value()
on each ref. If there are a large number of refs, this can
have a measurable impact on runtime.
Instead, let's resolve HEAD once when we realize we need the
%(HEAD) atom, allowing us to do a simple string comparison
for each ref. On a repository with 3000 branches (high, but
an actual example found in the wild) this drops the
best-of-five time to run "git branch >/dev/null" from 59ms
to 48ms (~20% savings).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a commit message is edited with the "verbose" option, the buffer
will have a cut line and diff after the log message, like so:
my subject
# ------------------------ >8 ------------------------
# Do not touch the line above.
# Everything below will be removed.
diff --git a/foo.txt b/foo.txt
index 5716ca5..7601807 100644
--- a/foo.txt
+++ b/foo.txt
@@ -1 +1 @@
-bar
+baz
"git interpret-trailers" is unaware of the cut line, and assumes the
trailer block would be at the end of the whole thing. This can easily
be seen with:
$ GIT_EDITOR='git interpret-trailers --in-place --trailer Acked-by:me' \
git commit --amend -v
Teach "git interpret-trailers" to notice the cut-line and ignore the
remainder of the input when looking for a place to add new trailer
block. This makes it consistent with how "git commit -v -s" inserts a
new Signed-off-by: line.
This can be done by the same logic as the existing helper function,
wt_status_truncate_message_at_cut_line(), uses, but it wants the caller
to pass a strbuf to it. Because the function ignore_non_trailer() used
by the command takes a <pointer, length> pair, not a strbuf, steal the
logic from wt_status_truncate_message_at_cut_line() to create a new
wt_status_locate_end() helper function that takes <pointer, length>
pair, and make ignore_non_trailer() call it to help "interpret-trailers".
Since there is only one caller of wt_status_truncate_message_at_cut_line()
in cmd_commit(), rewrite it to call wt_status_locate_end() helper instead
and remove the old helper that no longer has any caller.
Signed-off-by: Brian Malehorn <bmalehorn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One test in t5400 examines the packet exchange between git-push and
git-receive-pack. The latter inherits the GIT_TRACE_PACKET environment
variable, so that both processes dump trace data into the same file
concurrently. This should not be a problem because the trace file is
opened with O_APPEND.
On Windows, however, O_APPEND is not atomic as it should be: it is
emulated as lseek(SEEK_END) followed by write(). For this reason, the
test is unreliable: it can happen that one process overwrites a line
that was just written by the other process. As a consequence, the test
sometimes does not find one or another line that is expected (and it is
also successful occasionally).
The test case is actually only interested in the output of git-push.
To ensure that only git-push writes to the trace file, override the
receive-pack command such that it does not even open the trace file.
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 438fc68462 ("push options: pass push options to the transport
helper", 08-02-2017), the test coverage was reduced to run no tests at all
if you lack a http server. Move the http initialization to the end,
such that only http tests are skipped when a http server is missing.
The test in between that tests submodule propagation is safe to run before
the http tests as it makes its own test directories `parent` and
`parent_upstream`.
Noticed-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because TAP output does not like to see the remainder of the test
getting skipped after running one or more tests, bf4b7219
("test-lib.sh: Add check for invalid use of 'skip_all' facility",
2012-09-01) made sure that test_done errors out when this happens.
Instead, loosen the check so that we only pretend that the rest of
the test script did not exist in such a case. We'd lose a bit of
information (i.e. TAP does not notice that we are skipping some
tests), but not very much (i.e. TAP wasn't told how many tests are
skipped anyway).
This will allow inclusion of lib-httpd.sh in the middle of a test,
which will skip the remainder of the test scripts when tests that
involve web server are declined with GIT_TEST_HTTPD=false, for
example.
Acked-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When introducing git stash push in f5727e26e4 ("stash: introduce push
verb", 2017-02-19), I forgot to add it to the completion code. Add it
now.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Repositories with less than 4000 entries are always handled using a
single thread, causing test-lazy-init-name-hash --multi to error out.
Don't abort the whole test script in that case, but simply skip the
multi-threaded performance check. We can still use it to compare the
single-threaded speed of different versions in that case.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Jeff Hostetler <git@jeffhostetler.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the single-threaded variant beats the multi-threaded one then we may
have a performance bug, but that doesn't justify aborting the test.
Drop that check; we can compare the results for --single and --multi
using the actual performance tests.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Jeff Hostetler <git@jeffhostetler.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The perf test suite (more specifically: t/perf/aggregate.perl) requires
each test script to write test results into a file, otherwise it aborts
when aggregating. Add actual performance tests with test_perf to allow
p0004 to be run together with other perf scripts.
Calibrate the value for the parameter --count based on the size of the
test repository, in order to get meaningful results with smaller repos
yet still be able to finish the script against huge ones without having
to wait for hours.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Jeff Hostetler <git@jeffhostetler.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return code of commands on the producing end of a pipe is ignored.
Evaluate the outcome of test-lazy-init-name-hash by calling sort
separately.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Jeff Hostetler <git@jeffhostetler.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test library puts helpers into $PATH, so we can simply call them
without specifying their location.
The suffix $X is also not necessary because .exe files on Windows can be
started without specifying their extension, and on other platforms it's
empty anyway.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Jeff Hostetler <git@jeffhostetler.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The set_error_handle() function was introduced by 3b331e926
(vreportf: report to arbitrary filehandles, 2015-08-11) so
that run-command could send post-fork, pre-exec errors to
the parent's original stderr.
That use went away in 79319b194 (run-command: eliminate
calls to error handling functions in child, 2017-04-19),
which pushes all of the error reporting to the parent.
This leaves no callers of set_error_handle(). As we're not
likely to add any new ones, let's drop it.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent change that introduced autodecorating of refs accidentally
broke the ability of users to set log.decorate = false to override it.
When the git_log_config was traversed a second time with an option other
than log.decorate, the decoration style would be set to the automatic
style, even if the user had already overridden it. Instead of setting
the option in config parsing, set it in init_log_defaults instead.
Add a test for this case. The actual additional config option doesn't
matter, but it needs to be something not already set in the
configuration file.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Acked-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--local" option instructs git-config to read or modify
the repository-level config. This doesn't make any sense if
you're not actually in a repository.
Older versions of Git would blindly try to read or write
".git/config". For reading, this would result in a quiet
failure, since there was no config to read (and thus no
matching config value). Writing would generally fail
noisily, since ".git" was unlikely to exist. But since
b1ef400ee (setup_git_env: avoid blind fall-back to ".git",
2016-10-20), we catch this in the call to git_pathdup() and
die with an assertion.
Dying is the right thing to do, but we should catch the
problem early and give a more human-friendly error message.
Note that even without --local, git-config will sometimes
default to using local repository config (e.g., when
writing). These cases are already protected by similar
checks, and covered by a test in t1308.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Converting to BUG() makes it easier to detect and debug
cases where we hit this assertion. Coupled with a new test
in t1300, this shows that the test suite can detect such
corner cases.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's a convention in Git's code base to write assertions
as:
if (...some_bad_thing...)
die("BUG: the terrible thing happened");
with the idea that users should never see a "BUG:" message
(but if they, it at least gives a clue what happened). We
use die() here because it's convenient, but there are a few
draw-backs:
1. Without parsing the messages, it's hard for callers to
distinguish BUG assertions from regular errors.
For instance, it would be nice if the test suite could
check that we don't hit any assertions, but
test_must_fail will pass BUG deaths as OK.
2. It would be useful to add more debugging features to
BUG assertions, like file/line numbers or dumping core.
3. The die() handler can be replaced, and might not
actually exit the whole program (e.g., it may just
pthread_exit()). This is convenient for normal errors,
but for an assertion failure (which is supposed to
never happen), we're probably better off taking down
the whole process as quickly and cleanly as possible.
We could address these by checking in die() whether the
error message starts with "BUG", and behaving appropriately.
But there's little advantage at that point to sharing the
die() code, and only downsides (e.g., we can't change the
BUG() interface independently). Moreover, converting all of
the existing BUG calls reveals that the test suite does
indeed trigger a few of them.
Instead, this patch introduces a new BUG() function, which
prints an error before dying via SIGABRT. This gives us test
suite checking and core dumps. The function is actually a
macro (when supported) so that we can show the file/line
number.
We can convert die("BUG") invocations to BUG() in further
patches, dealing with any test fallouts individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-filter-branch requires the specification of a branch by one way or
another. If no branch appears to have been specified, we know the user
got the usage wrong but we don't know what they were trying to do ---
e.g. maybe they specified the ref to rewrite but in the wrong place.
In this case, just state that the branch specification is missing.
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git read-tree -m" requires a tree argument to name the tree to be
merged in. Git uses a cutesy error message to say so and why:
$ git read-tree -m
warning: read-tree: emptying the index with no arguments is
deprecated; use --empty
fatal: just how do you expect me to merge 0 trees?
$ git read-tree -m --empty
fatal: just how do you expect me to merge 0 trees?
When lucky, that could produce an ah-hah moment for the user, but it's
more likely to irritate and distract them.
Instead, tell the user plainly that the tree argument is
required. Also document this requirement in the git-read-tree(1)
manpage where there is room to explain it in a more straightforward way.
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There has been a bug report by a corporate user that stated that
"spelling mistake of stash followed by a yes prints character 'y'
infinite times."
This analysis was false. When the spelling of a command contains
errors, the git program tries to help the user by providing candidates
which are close to the unexisting command. E.g Git prints the
following:
git: 'stahs' is not a git command. See 'git --help'.
Did you mean this?
stash
and then exits.
The problem with this hint is that it is not formally indicated as an
hint and the user is in fact encouraged to reply to the question,
whereas the Git command is already finished.
The user was unlucky enough that it was the command he was looking
for, and replied "yes" on the command line, effectively launching the
`yes` program.
The initial error is that the Git programs, when launched in
command-line mode (without interaction) must not ask questions,
because these questions would normally require a user input as a reply
that they won't handle indeed. That's a source of confusion on UX
level.
To improve the general usability of the Git suite, the following rule
was applied:
if the sentence
* appears in a non-interactive session
* is printed last before exit
* is a question addressing the user ("you")
the sentence is turned into affirmative and proposes the option.
The basic rewording of the question sentences has been extended to
other spots found in the source.
Requested at https://github.com/git/git-scm.com/issues/999 by rpai1
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the include examples use "foo.inc", but some use
"foo". Since the string of examples are meant to show
variations and how they differ, it's a good idea to change
only one thing at a time. The filename differences are not
relevant to what we're trying to show.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the word "expand" to refer to including the contents
of another config file isn't really accurate, since it's a
verbatim insertion. And it can cause confusion with the
expanding of the path itself via things like "~".
Let's clarify when we are referring to the contents versus
the filename, and use appropriate verbs in each case.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The changes in the previous commit hopefully clarify that
the evaluation of an include "path" variable is the same no
matter if it's in a conditional section or not. But since
this question came up on the list, let's add an example that
makes it obvious.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "includeIf" directives behave exactly like include ones,
except they only kick in when the conditional is true. That
was mentioned in the "conditional" section, but let's make
it more clear for the whole "includes" section, since people
don't necessarily read the documentation top to bottom.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a job to run Git tests with GETTEXT_POISON. In this job we don't run
the git-p4, git-svn, and HTTPD tests to save resources/time (those tests
are already executed in other jobs). Since we don't run these tests, we
can also skip the "before_install" step (which would install the
necessary dependencies) with an empty override.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command that made the "prove cache" persistent across builds was
executed in the "before_install" step. Consequently, every job that
wanted to make use of the cache had to run this step.
The "prove cache" is only used in the "script" step for the
"make test" command. Therefore, we should configure the "prove cache"
in this step.
This change is useful for a subsequent patch that adds a job which does
not need the "before_install" step but wants to run the "script" step to
execute the tests.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GETTEXT_POISON=YesPlease compile-time testing option added in my
bb946bba76 ("i18n: add GETTEXT_POISON to simulate unfriendly
translator", 2011-02-22) has been slowly bitrotting as strings have
been marked for translation, and new tests have been added without
running it.
I brought this up on the list ("[BUG] test suite broken with
GETTEXT_POISON=YesPlease", [1]) asking whether this mode was useful at
all anymore. At least one person occasionally uses it, and Lars
Schneider offered to change one of the the Travis builds to run in
this mode, so fix up the failing ones.
My test setup runs most of the tests, with the notable exception of
skipping all the p4 tests, so it's possible that there's still some
lurking regressions I haven't fixed.
1. <CACBZZX62+acvi1dpkknadTL827mtCm_QesGSZ=6+UnyeMpg8+Q@mail.gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fb1bb965 ("read-tree: deprecate syntax without tree-ish args",
2010-09-10) wanted to deprecate "git read-tree" without any tree,
which used to be the way to empty the index, and encourage use of
"git read-tree --empty" instead.
However, when used with "-m", "--empty" does not make any sense,
either, simply because merging 0 trees will result in a different
error anyway.
Omit the deprecation warning and let the code to emit real error
message diagnose the error.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of t0027 is to test all CRLF related conversions at "git
checkout" and "git add". Running t0027 under Git for Windows takes
3-4 minutes, so the whole script had been marked as "EXPENSIVE".
However, the "Git for Windows" fork overrides this since 2014:
"t0027 is marked expensive, but really, for MinGW we want to run
these tests always."
The test seems not to be expensive on other platforms at all: it
takes less than 14 seconds under Linux, and 63 seconds under Mac Os
X, and this is more or less the same with a SSD or a spinning disk.
So let's drop the "EXPENSIVE" prereq.
While at it, retire t0025; recent "stress" tests show that t0025 is
flaky, reported by Lars Schneider <larsxschneider@gmail.com>, but
all tests in t0025 are covered by t0027 already.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test t4051-diff-function-context.sh passes on Linux when
core.autocrlf=true even without marking its support files as LF-only,
but they fail when core.autocrlf=true in Git for Windows' SDK.
The reason is that `grep ... >file.c.new` will keep CR/LF line endings
on Linux (obviously treating CRs as if they were regular characters),
but will be converted to LF-only line endings with MSYS2's grep that is
used in Git for Windows.
As we do not want to validate the way the available `grep` works, let's
just mark the input as LF-only and move on.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test suite is mainly developed on Linux and MacOSX, which is the
reason that nobody thought to mark files as LF-only as needed.
The symptom is a test suite that fails left and right when being checked
out using Git for Windows (which defaults to core.autocrlf=true).
Mostly, the problems stem from Git's (LF-only) output being compared to
hard-coded files that are checked out with line endings according to
core.autocrlf (which is of course incorrect). This includes the two test
files in t/diff-lib/, README and COPYING.
This patch can be validated even on Linux by using this cadence:
git config core.autocrlf true
rm .git/index && git stash
make -j15 DEVELOPER=1 test
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current convention is to either generate files on the fly in tests,
or to use supporting files taken from a t/tNNNN/ directory (where NNNN
matches the test's number, or the number of the test from which we
borrow supporting files).
The test t3901-i18n-patch.sh was obviously introduced before that
convention was in full swing, hence its supporting files still lived in
t/t3901-8859-1.txt and t/t3901-utf8.txt, respectively.
Let's adjust to the current convention.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this change, the completion script does not work, as Bash expects
its scripts to have line feeds as end-of-line markers (this is
particularly prominent in quoted multi-line strings, where carriage
returns would slip into the strings as verbatim characters otherwise).
This change is required to let t9902-completion pass when Git's source
code is checked out with `core.autocrlf = true`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bash does not handle scripts with CR/LF line endings correctly, therefore
they *have* to be forced to LF-only line endings.
Funnily enough, this fixes t3000-ls-files-others and
t1021-rerere-in-workdir when git.git was checked out with
core.autocrlf=true, as these test still use git-new-workdir (once `git
worktree` is no longer marked as experimental, both scripts probably
want to be ported to using that command instead).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, the default line endings are denoted by a Carriage Return
byte followed by a Line Feed byte, while Linux and MacOSX use a single
Line Feed byte to denote a line ending.
To help with this situation, Git introduced several mechanisms over the
last decade, most prominently the `core.autocrlf` setting.
Sometimes, however, a single setting is incorrect, e.g. when certain
files in the source code are to be consumed by software that can handle
only LF line endings, while other files can use whatever is appropriate
for the current platform.
To allow for that, Git added the `eol` option to its .gitattributes
handling, expecting every user of Git to mark their source code
appropriately.
Bash assumes that line-endings of scripts are denoted by a single Line
Feed byte. Therefore, shell scripts in Git's source code are one example
where that `eol=lf` option is *required*.
When generating common-cmds.h, the Unix tools we use generally operate on
the assumption that input and output deliminate their lines using LF-only
line endings. Consequently, they would happily copy the CR byte verbatim
into the strings in common-cmds.h, which in turn makes the C preprocessor
barf (that interprets them as MacOS-style line endings). Therefore, we
have to mark the input files as LF-only: command-list.txt and
Documentation/git-*.txt.
Quite a bit belatedly, this patch brings Git's own source code in line
with those expectations by setting those attributes to allow for a
correct build even when core.autocrlf=true.
This patch can be validated even on Linux, by using this cadence:
git config core.autocrlf true
rm .git/index && git stash
make -j15 DEVELOPER=1
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit f6a4e61 ("push: accept push options", 2016-07-14), send-pack
was taught to include push options both within the signed cert (if the
push is a signed push) and outside the signed cert; however,
receive-pack ignores push options within the cert, only handling push
options outside the cert.
Teach receive-pack, in the case that push options are provided for a
signed push, to verify that the push options both within the cert and
outside the cert are consistent.
This sets in stone the requirement that send-pack redundantly send its
push options in 2 places, but I think that this is better than the
alternatives. Sending push options only within the cert is
backwards-incompatible with existing Git servers (which read push
options only from outside the cert), and sending push options only
outside the cert means that the push options are not signed for.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git checkout -m" does an in-core three-way merge to carry
local modifications forward to check out a different branch, the
code forgot to free the updated contents it has in-core.
Noticed-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit c714e45 ("receive-pack: implement advertising and receiving
push options", 2016-07-14), receive-pack was taught to (among other
things) advertise that it understood push options, depending on
configuration. It was documented that it advertised such ability by
default; however, it actually does not. (In that commit, notice that
advertise_push_options defaults to 0, unlike advertise_atomic_push which
defaults to 1.)
Update the documentation to state that it does not advertise the ability
by default.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our usual shell style is to put the "do" of a loop on its
own line, like:
while $cond
do
something
done
instead of:
while $cond; do
something
done
We have a bit of both in our code base, but the former is
what's in CodingGuidelines (and outnumbers the latter in t/
by about 6:1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If certain options like --honor-pack-keep, --local, or
--incremental are used with pack-objects, then we need to
feed each potential object to want_object_in_pack() to see
if it should be filtered out. But when the bitmap
reuse_packfile optimization is in effect, we do not call
that function at all, and in fact skip adding the objects to
the to_pack list entirely. This means we have a bug: for
certain requests we will silently ignore those options and
include objects in that pack that should not be there.
The problem has been present since the inception of the
pack-reuse code in 6b8fda2db (pack-objects: use bitmaps when
packing objects, 2013-12-21), but it was unlikely to come up
in practice. These options are generally used for on-disk
packing, not transfer packs (which go to stdout), but we've
never allowed pack reuse for non-stdout packs (until
645c432d6, we did not even use bitmaps, which the reuse
optimization relies on; after that, we explicitly turned it
off when not packing to stdout).
We can fix this by just disabling the reuse_packfile
optimization when the options are in use. In theory we could
teach the pack-reuse code to satisfy these checks, but it's
not worth the complexity. The purpose of the optimization is
to keep the amount of per-object work we do to a minimum.
But these options inherently require us to search for other
copies of each object, drowning out any benefit of the
pack-reuse optimization. But note that the optimizations
from 56dfeb626 (pack-objects: compute local/ignore_pack_keep
early, 2016-07-29) happen before pack-reuse, meaning that
specifying "--honor-pack-keep" in a repository with no .keep
files can still follow the fast path.
There are tests in t5310 that check these options with
bitmaps and --stdout, but they didn't catch the bug, and
it's hard to adapt them to do so.
One problem is that they don't use --delta-base-offset;
without that option, we always disable the reuse
optimization entirely. It would be fine to add it in (it
actually makes the test more realistic), but that still
isn't quite enough.
The other problem is that the reuse code is very picky; it
only kicks in when it can reuse most of a pack, starting
from the first byte. So we'd have to start from a fully
repacked and bitmapped state to trigger it. But the tests
for these options use a much more subtle state; they want to
be sure that the want_object_in_pack() code is allowing some
objects but not others. Doing a full repack runs counter to
that.
So this patch adds new tests at the end of the script which
create the fully-packed state and make sure that each option
is not fooled by reusable pack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
4af9a7d3 ("Merge branch 'bc/object-id'", 2016-09-19) involved
merging a lot of changes made to builtin/apply.c on the side branch
manually to apply.c as an intervening commit 13b5af22 ("apply: move
libified code from builtin/apply.c to apply.{c,h}", 2016-04-22)
moved a lot of the lines changed on the side branch to a different
file apply.c at the top-level, requiring manual patching of it.
Apparently, the maintainer screwed up and made the code indent in a
funny way while doing so.
Reported-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is really no reason why we would need to hold onto the allocated
string longer than necessary.
Reported by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The buffer allocated by shorten_unambiguous_ref() needs to be released.
Discovered by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the `name_rev()` function is asked to dereference the tip name, it
allocates memory. But when it turns out that another tip already
described the commit better than the current one, we forgot to release
the memory.
Pointed out by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `guess_ref()` returns an allocated buffer of which `make_linked_ref()`
does not take custody (`alloc_ref()` makes a copy), therefore we need to
release the buffer afterwards.
Noticed via Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We free()d the `log` buffer when dwim_log() returned 1, but not when it
returned a larger value (which meant that it still allocated the buffer
but we simply ignored it).
While in the vicinity, make sure that the `reflogs` structure as well as
the `branch` variable are released properly, too.
Identified by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The setup_explicit_git_dir() function does not take custody of the string
passed as first parameter; we have to release it if we turned the value of
git_dir into an absolute path.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Coverity reported a memory leak in this function. However, it can only
be called once, as setup_git_directory() changes global state and hence
is not reentrant.
Mark the variable as static to indicate that this is a singleton.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function did a whole lot of unnecessary work, such as reading in
four files just to figure out that, oh, hey, we do not need to look at
them after all because the HEAD is not detached.
Simplify the entire function to return early when possible, to read in
the files only when necessary, and to release the allocated memory
always (there was a leak, reported via Coverity, where we failed to
release the allocated strings if the HEAD is not detached).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change addresses part of the NEEDSWORK comment above the code,
therefore the comment needs to be adjusted, too.
Discovered via Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While POSIX states that it is okay to pass EOF to isspace() (and it seems
to be implied that EOF should *not* be treated as whitespace), and also to
pass EOF to ungetc() (which seems to be intended to fail without buffering
the character), it is much better to handle these cases explicitly. Not
only does it reduce head-scratching (and helps static analysis avoid
reporting false positives), it also lets us handle files containing
nothing but whitespace by erroring out.
Reported via Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change plugs a couple of memory leaks and makes sure that the file
descriptor is closed in run_dir_diff().
Spotted by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fail to read, or parse, the file, we still want to close the file
descriptor and release the strbuf.
Reported via Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In case of errors, we really want the file descriptor to be closed.
Discovered by a Coverity scan.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It would appear that we allocate (and forget to release) memory if the
patch ID is not even defined.
Reported by the Coverity tool.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we could not convert the UTF-8 sequence into Unicode for writing to
the Console, we should not try to write an insanely-long sequence of
invalid wide characters (mistaking the negative return value for an
unsigned length).
Reported by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To initialize the foreground color attributes of "plain text", our ANSI
emulation tries to infer them from the currently attached console while
running the is_console() function. This function first tries to detect any
console attached to stdout, then it is called with stderr.
If neither stdout nor stderr has any console attached, it does not
actually matter what we use for "plain text" attributes, as we never need
to output any text to any console in that case.
However, after working on stdout and stderr, is_console() is called with
stdin, and it still tries to initialize the "plain text" attributes if
they had not been initialized earlier. In this case, we cannot detect any
attributes, and we used an uninitialized value for them.
Naturally, Coverity complained about this use case because it could not
reason about the code deeply enough to figure out that we do not even use
those attributes in that case.
Let's just initialize the value to 0 in that case, both to avoid future
Coverity reports, and to help catch future regressions in case anybody
changes the order of the is_console() calls (which would make the text
black on black).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the (admittedly, concocted) case that PATH consists only of path
delimiters, we would leak the duplicated string.
Reported by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If resolve_refdup() fails it returns NULL and possibly leaves its hash
output parameter untouched. Make sure to use it only if the function
succeeded, in order to avoid accessing uninitialized memory.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If resolve_refdup() fails it returns NULL and possibly leaves its hash
output parameter untouched. Make sure to use it only if the function
succeeded, in order to avoid accessing uninitialized memory.
Found with t/t2011-checkout-invalid-head.sh --valgrind.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace a couple of broken links to gmane with links to other
archives. See commit 54471fdcc3 ("README: replace gmane link with
public-inbox", 2016-12-15) for prior art.
With this change there's still 4 references left in the code:
$ git grep -E '(article|thread)\.gmane.org' -- |grep -v RelNotes|wc -l
4
I couldn't find alternative links for those.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We forgot to prepare the submodule env, which is only a problem for
nested submodules. See 2e5d6503bd (ls-files: fix recurse-submodules
with nested submodules, 2017-04-13) for further explanation.
To come up with a proper test for this, we'd need to look at nested
submodules just as in that given commit. It turns out we're lucky
and these tests already exist, but are marked as failing. We need
to pass `--recurse-submodules` to read-tree additionally to make
these tests pass. Passing that flag alone would not make the tests
pass, such that this covers testing for the bug fix of the submodule
env as well.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All commands that are run in a submodule, are run in a correct setup,
there is no need to prepare the environment without setting the GIT_DIR
variable. By setting the GIT_DIR variable we fix issues as discussed in
10f5c52656 (submodule: avoid auto-discovery in
prepare_submodule_repo_env(), 2016-09-01)
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not need to declare another struct child_process, but we can just
reuse the existing `cp` struct.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --config" uses the following incantation to add an item to
a config file, instead of replacing an existing value:
git_config_set_multivar_gently(key, value, "^$", 0)
As long as no existing value matches the regex ^$, that works as
intended and adds to the config. When a value is empty, though, it
replaces the existing value.
Noticed while trying to set credential.helper during a clone to use a
specific helper without inheriting from ~/.gitconfig and
/etc/gitconfig. That is, I ran
git clone -c credential.helper= \
-c credential.helper=myhelper \
https://example.com/repo
intending to produce the configuration
[credential]
helper =
helper = myhelper
Without this patch, the 'helper =' line is not included and the
credential helper from /etc/gitconfig gets used.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's configuration system works by reading multiple configuration
files in order, from general to specific:
- first, the system configuration /etc/gitconfig
- then the user's configuration (~/.gitconfig or ~/.config/git/config)
- then the repository configuration (.git/config)
For single-valued configuration items, the latest value wins. For
multi-valued configuration items, values accumulate in that order.
For example, this allows setting a credential helper globally in
~/.gitconfig that git will try to use in all repositories, regardless
of whether they additionally provide another helper. This is usually
a nice thing --- e.g. I can install helpers to use my OS keychain and
to cache credentials for a short period of time globally.
Sometimes people want to be able to override an inherited setting.
For the credential.helper setting, this is done by setting the
configuration item to empty before giving it a new value. This is
already documented but the documentation is hard to find ---
git-config(1) says to look at gitcredentials(7) and the config
reference in gitcredentials(7) doesn't mention this issue.
Move the documentation to the config reference to make it easier to
find.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" failed to re-read the todo list file when the
command specified with the `exec` instruction updated it.
* sh/rebase-i-reread-todo-after-exec:
rebase -i: reread the todo list if `exec` touched it
32-bit Linux build on Travis CI uses stricter compilation options.
* ls/travis-stricter-linux32-builds:
travis-ci: set DEVELOPER knob for Linux32 build
Relaying status from Windows build by Travis CI was done with an
unsafe invocation of printf.
* ls/travis-win-fix-status:
travis-ci: printf $STATUS as string
Fix a segv in 'submodule init' when url is not given for a submodule.
* jk/submodule-init-segv-fix:
submodule_init: die cleanly on submodules without url defined
Completion for "git checkout <branch>" that auto-creates the branch
out of a remote tracking branch can now be disabled, as this
completion often gets in the way when completing to checkout an
existing local branch that happens to share the same prefix with
bunch of remote tracking branches.
* jk/complete-checkout-sans-dwim-remote:
completion: optionally disable checkout DWIM
The building of the reflog message is using strbuf, which is not
friendly with internationalization frameworks. No other reflog
messages are translated right now and switching all the messages to
i18n would require a major rework of the way the messages are built.
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit cf9e55f494 ("submodule: prevent backslash expantion in submodule
names", 07-04-2017) added a test which creates a git repository with
some backslash characters in the name. On windows, where the backslash
character is a directory separator, it is not possible to create a
repository with the name 'sub\with\backslash'. (The NTFS filesystem would
probably allow it, but the win32 api does not). The MinGW and Git for
Windows versions of git actually create a repository called 'backslash'
in the sub-directory 'sub/with'.
On cygwin, however, due to the slightly schizophrenic treatment of the
backslash character by cygwin-git, this test fails at the 'git init'
stage. The git-init command does not recognise the directory separators
in the input path (eg. is_dir_sep('\\') is false), so it does not
attempt to create the leading directories 'sub/with'. (The call to
mkdir('sub\\with\\backslash') actually does recognise the directory
separators, but fails because the 'sub/with' directory doesn't exist).
In order to suppress the test failure (for now), add the !CYGWIN test
prerequisite.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Listing the specific hooks might feel verbose but without it the
reader is left to wonder which hooks are triggered during the
push. Something which is not immediately obvious when only trying
to find out where the hook is executed.
Signed-off-by: Simon Ruderich <simon@ruderich.org>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach do_write_index() to close the index.lock file
before getting the mtime and updating the istate.timestamp
fields.
On Windows, a file's mtime is not updated until the file is
closed. On Linux, the mtime is set after the last flush.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The local ident_split variable is often mentioned three
times per line when dealing with its begin/end pointer
pairs. Let's use a shorter name which lets us get rid of
some long lines. Since this is a short self-contained
function, readability doesn't suffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After we call split_ident_line(), we have several begin/end
pairs for various parts of the ident. We then copy each into
a strbuf to create a single string, and then detach that
string. We can instead skip the strbuf entirely and just
duplicate the strings directly.
This is shorter, and it makes it more obvious that we are
not leaking the strbuf (we were not before, because every
code path either died or hit a strbuf_detach).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calling logmsg_reencode() may allocate a buffer for the
commit message (because we need to load it from disk, or
because it needs re-encoded). We must "unuse" it afterwards
to free it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the scripted version of the interactive rebase, there was no internal
representation of the todo list; it was re-read before every command.
That allowed the hack that an `exec` command could append (or even
completely rewrite) the todo list.
This hack was broken by the partial conversion of the interactive rebase
to C, and this patch reinstates it.
We also add a small test to verify that this fix does not regress in the
future.
Signed-off-by: Stephen Hicks <sdh@google.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Linux32 build was not build with our strict compiler settings (e.g.
warnings as errors). Fix this by passing the DEVELOPER environment
variable to the docker container.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the $STATUS variable contains a "%" character then printf will
interpret that as invalid format string. Fix this by formatting $STATUS
as string.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`make` does not necessarily fail with an error code if
Asciidoc/AsciiDoctor encounters problems. Anything written to stderr
might be a better indicator for problems.
Ensure that nothing is written to stderr during a documentation build.
The redirects do not work in `sh`, therefore the script uses `bash`.
This shouldn't be a problem as the script is only executed on TravisCI.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When encountering a commit message that does not end in a newline,
sequencer does not complete the line before determining if a blank line
should be added. This causes the "(cherry picked..." and sign-off lines
to sometimes appear on the same line as the last line of the commit
message.
This behavior was introduced by commit 967dfd4 ("sequencer: use
trailer's trailer layout", 2016-11-29). However, a revert of that commit
would not resolve this issue completely: prior to that commit, a
conforming footer was deemed to be non-conforming by
has_conforming_footer() if there was no terminating newline, resulting
in both conforming and non-conforming footers being treated the same
when they should not be.
Resolve this issue, both for conforming and non-conforming footers, and
in both do_pick_commit() and append_signoff(), by always adding a
newline to the commit message if it does not end in one before checking
the footer for conformity.
Reported-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous step added a path zzzzzzzz to the index, and then used
"sed" to replace this string to yyyyyyyy to create a test case where
the checksum at the end of the file does not match the contents.
Unfortunately, use of "sed" on a non-text file is not portable.
Instead, use a Perl script that seeks to the end and modifies the
last byte of the file (where we _know_ stores the trailing
checksum).
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internals of the refs API around the cached refs has been
streamlined.
* mh/separate-ref-cache:
do_for_each_entry_in_dir(): delete function
files_pack_refs(): use reference iteration
commit_packed_refs(): use reference iteration
cache_ref_iterator_begin(): make function smarter
get_loose_ref_cache(): new function
get_loose_ref_dir(): function renamed from get_loose_refs()
do_for_each_entry_in_dir(): eliminate `offset` argument
refs: handle "refs/bisect/" in `loose_fill_ref_dir()`
ref-cache: use a callback function to fill the cache
refs: record the ref_store in ref_cache, not ref_dir
ref-cache: introduce a new type, ref_cache
refs: split `ref_cache` code into separate files
ref-cache: rename `remove_entry()` to `remove_entry_from_dir()`
ref-cache: rename `find_ref()` to `find_ref_entry()`
ref-cache: rename `add_ref()` to `add_ref_entry()`
refs_verify_refname_available(): use function in more places
refs_verify_refname_available(): implement once for all backends
refs_ref_iterator_begin(): new function
refs_read_raw_ref(): new function
get_ref_dir(): don't call read_loose_refs() for "refs/bisect"
Allow to lock a worktree immediately after it's created. This helps
prevent a race between "git worktree add; git worktree lock" and
"git worktree prune".
* nd/worktree-add-lock:
worktree add: add --lock option
Many stale HTTP(s) links have been updated in our documentation.
* jk/update-links-in-docs:
docs/bisect-lk2009: update java code conventions link
docs/bisect-lk2009: update nist report link
docs/archimport: quote sourcecontrol.net reference
gitcore-tutorial: update broken link
doc: replace or.cz gitwiki link with git.wiki.kernel.org
doc: use https links to avoid http redirect
The completion script (in contrib/) learned to complete "git push
--delete b<TAB>" to complete branch name to be deleted.
* ab/completion-push-delete-ref:
completion: expand "push --delete <remote> <ref>" for refs on that <remote>
The split-index code configuration code used an unsafe git_path()
function without copying its result out.
* cc/split-index-config:
read-cache: avoid using git_path() in freshen_shared_index()
While handy, "git_path()" is a dangerous function to use as a
callsite that uses it safely one day can be broken by changes
to other code that calls it. Reduction of its use continues.
* jk/war-on-git-path:
am: drop "dir" parameter from am_state_init
replace strbuf_addstr(git_path()) with git_path_buf()
replace xstrdup(git_path(...)) with git_pathdup(...)
use git_path_* helper functions
branch: add edit_description() helper
bisect: add git_path_bisect_terms helper
"git checkout" that handles a lot of paths has been optimized by
reducing the number of unnecessary checks of paths in the
has_dir_name() function.
* jh/add-index-entry-optim:
read-cache: speed up has_dir_name (part 2)
read-cache: speed up has_dir_name (part 1)
read-cache: speed up add_index_entry during checkout
p0006-read-tree-checkout: perf test to time read-tree
read-cache: add strcmp_offset function
The recently introduced conditional inclusion of configuration did
not work well when early-config mechanism was involved.
* nd/conditional-config-in-early-config:
config: correct file reading order in read_early_config()
config: handle conditional include when $GIT_DIR is not set up
config: prepare to pass more info in git_config_with_options()
A recent update broke "git add -p ../foo" from a subdirectory.
* ps/pathspec-empty-prefix-origin:
pathspec: honor `PATHSPEC_PREFIX_ORIGIN` with empty prefix
Having a git command on the upstream side of a pipe in a test
script will hide the exit status from the command, which may cause
us to fail to notice a breakage; rewrite tests in a script to avoid
this issue.
* pc/t2027-git-to-pipe-cleanup:
t2027: avoid using pipes
"git rebase" learns "--signoff" option.
* gb/rebase-signoff:
rebase: pass --[no-]signoff option to git am
builtin/am: fold am_signoff() into am_append_signoff()
builtin/am: honor --signoff also when --rebasing
In some situations run-command will incorrectly try (and fail) to
execute a directory instead of an executable file. This was observed by
having a directory called "ssh" in $PATH before the real ssh and trying
to use ssh protoccol, reslting in the following:
$ git ls-remote ssh://url
fatal: cannot exec 'ssh': Permission denied
It ends up being worse and run-command will even try to execute a
non-executable file if it preceeds the executable version of a file on
the PATH. For example, if PATH=~/bin1:~/bin2:~/bin3 and there exists a
directory 'git-hello' in 'bin1', a non-executable file 'git-hello' in
bin2 and an executable file 'git-hello' (which prints "Hello World!") in
bin3 the following will occur:
$ git hello
fatal: cannot exec 'git-hello': Permission denied
This is due to only checking 'access()' when locating an executable in
PATH, which doesn't distinguish between files and directories. Instead
use 'is_executable()' which check that the path is to a regular,
executable file. Now run-command won't try to execute the directory or
non-executable file 'git-hello':
$ git hello
Hello World!
which matches what execvp(3) would have done when asked to execute
git-hello with such a $PATH.
Reported-by: Brian Hatfield <bhatfield@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the logic for 'is_executable()' from help.c to run_command.c and
expose it so that callers from outside help.c can access the function.
This is to enable run-command to be able to query if a file is
executable in a future patch.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our array-reverse algorithm does the usual "walk from both
ends, swapping elements". We can quit when the two indices
are equal, since:
1. Swapping an element with itself is a noop.
2. If i and j are equal, then in the next iteration i is
guaranteed to be bigge than j, and we will exit the
loop.
So exiting the loop on equality is slightly more efficient.
And more importantly, the new SWAP() macro does not expect
to handle noop swaps; it will call memcpy() with the same src
and dst pointers in this case. It's unclear whether that
causes a problem on any platforms by violating the
"overlapping memory" constraint of memcpy, but it does cause
valgrind to complain.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we init a submodule, we try to die when it has no URL
defined:
url = xstrdup(sub->url);
if (!url)
die(...);
But that's clearly nonsense. xstrdup() will never return
NULL, and if sub->url is NULL, we'll segfault.
These two bits of code need to be flipped, so we check
sub->url before looking at it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gethostname(2) may not NUL terminate the buffer if hostname does
not fit; unfortunately there is no easy way to see if our buffer
was too small, but at least this will make sure we will not end up
using garbage past the end of the buffer.
* dt/xgethostname-nul-termination:
xgethostname: handle long hostnames
use HOST_NAME_MAX to size buffers for gethostname(2)
"ls-files --recurse-submodules" did not quite work well in a
project with nested submodules.
* jk/ls-files-recurse-submodules-fix:
ls-files: fix path used when recursing into submodules
ls-files: fix recurse-submodules with nested submodules
Various small fixes.
* rs/misc-cppcheck-fixes:
server-info: avoid calling fclose(3) twice in update_info_file()
files_for_each_reflog_ent_reverse(): close stream and free strbuf on error
am: close stream on error, but not stdin
"git fetch-pack" was not prepared to accept ERR packet that the
upload-pack can send with a human-readable error message. It
showed the packet contents with ERR prefix, so there was no data
loss, but it was redundant to say "ERR" in an error message.
* jt/fetch-pack-error-reporting:
fetch-pack: show clearer error message upon ERR
Add finishing touches to a recent topic.
* jk/quarantine-received-objects:
refs: reject ref updates while GIT_QUARANTINE_PATH is set
receive-pack: document user-visible quarantine effects
receive-pack: drop tmp_objdir_env from run_update_hook
"git submodule" script does not work well with strange pathnames.
Protect it from a path with slashes in them, at least.
* bw/submodule-with-bs-path:
submodule: prevent backslash expantion in submodule names
The index file has a trailing SHA-1 checksum to detect file
corruption, and historically we checked it every time the index
file is used. Omit the validation during normal use, and instead
verify only in "git fsck".
* jh/verify-index-checksum-only-in-fsck:
read-cache: force_verify_index_checksum
In a 2- and 3-way merge of trees, more than one source trees often
end up sharing an identical subtree; optimize by not reading the
same tree multiple times in such a case.
* jh/unpack-trees-micro-optim:
unpack-trees: avoid duplicate ODB lookups during checkout
The string-list API used a custom reallocation strategy that was
very inefficient, instead of using the usual ALLOC_GROW() macro,
which has been fixed.
* jh/string-list-micro-optim:
string-list: use ALLOC_GROW macro when reallocing string_list
$GIT_DIR may in some cases be normalized with all symlinks resolved
while "gitdir" path expansion in the pattern does not receive the
same treatment, leading to incorrect mismatch. This has been fixed.
* nd/conditional-config-include:
config: resolve symlinks in conditional include's patterns
path.c: and an option to call real_path() in expand_user_path()
Allow the http.postbuffer configuration variable to be set to a
size that can be expressed in size_t, which can be larger than
ulong on some platforms.
* dt/http-postbuffer-can-be-large:
http.postbuffer: allow full range of ssize_t values
"http.proxy" set to an empty string is used to disable the usage of
proxy. We broke this early last year.
* sr/http-proxy-configuration-fix:
http: fix the silent ignoring of proxy misconfiguraion
http: honor empty http.proxy option to bypass proxy
Change the test descriptions from being treated as binary blobs by
perl to being treated as UTF-8. This ensures that e.g. a test
description like "æ" is counted as 1 character, not 2.
I have WIP performance tests for non-ASCII grep patterns on another
topic that are affected by this.
Now instead of:
$ ./run p0000-perf-lib-sanity.sh
[...]
0000.4: export a weird var 0.00(0.00+0.00)
0000.5: éḿíẗ ńöń-ÁŚĆÍÍ ćḧáŕáćẗéŕś 0.00(0.00+0.00)
0000.7: important variables available in subshells 0.00(0.00+0.00)
[...]
We emit:
[...]
0000.4: export a weird var 0.00(0.00+0.00)
0000.5: éḿíẗ ńöń-ÁŚĆÍÍ ćḧáŕáćẗéŕś 0.00(0.00+0.00)
0000.7: important variables available in subshells 0.00(0.00+0.00)
[...]
Fixes code originally added in 342e9ef2d9 ("Introduce a performance
testing framework", 2012-02-17).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we complete branch names for "git checkout", we also
complete remote branch names that could trigger the DWIM
behavior. Depending on your workflow and project, this can
be either convenient or annoying.
For instance, my clone of gitster.git contains 74 local
"jk/*" branches, but origin contains another 147. When I
want to checkout a local branch but can't quite remember the
name, tab completion shows me 251 entries. And worse, for a
topic that has been picked up for pu, the upstream branch
name is likely to be similar to mine, leading to a high
probability that I pick the wrong one and accidentally
create a new branch.
This patch adds a way for the user to tell the completion
code not to include DWIM suggestions for checkout. This can
already be done by typing:
git checkout --no-guess jk/<TAB>
but that's rather cumbersome. The downside, of course, is
that you no longer get completion support when you _do_ want
to invoke the DWIM behavior. But depending on your workflow,
that may not be a big loss (for instance, in git.git I am
much more likely to want to detach, so I'd type "git
checkout origin/jk/<TAB>" anyway).
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the completion of "push --delete <remote> <ref>" to complete
refs on that <remote>, not all refs.
Before this cloning git.git and doing "git push --delete origin
p<TAB>" will complete nothing, since a fresh clone of git.git will
have no "pu" branch, whereas origin/p<TAB> will uselessly complete
origin/pu, but fully qualified references aren't accepted by
"--delete".
Now p<TAB> will complete as "pu". The completion of giving --delete
later, e.g. "git push origin --delete p<TAB>" remains unchanged, this
is a bug, but is a general existing limitation of the bash completion,
and not how git-push is documented, so I'm not fixing that case, but
adding a failing TODO test for it.
The testing code was supplied by SZEDER Gábor in
<20170421122832.24617-1-szeder.dev@gmail.com> with minor setup
modifications on my part.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Test-code-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old link just redirects to a big index page. I was able
to find a new link for the original document via Google.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original NIST press release linked here is no longer
available. But it was just a one-page summary of a larger
planning report; we can link to the report and point people
to the executive summary, which contains the same
information.
Ideally we'd cite it with a DOI, but I couldn't dig one up
for this particular document. I found many URLs pointing to
this report, but they all end up redirecting to this one
(and it looks somewhat official).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-archimport has an option to register archives at
mirrors.sourcecontrol.net. The sourcecontrol.net domain
still exists, but that hostname no longer exists.
That means this feature is presumably broken. I'll leave the
examination and modification of that to people who might
actually use archimport. But in the meantime, let's wrap the
reference in the documentation in backticks, which will
avoid turning it into a broken link (and thus polluting
linkchecker results).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The slides for the Linux-mentoring presentation are no
longer available. Let's point to the wayback version of the
page, which works.
Note that the referenced diagram is also available on page
15 of [1]. We could link to that instead, but it's not clear
from the URL scheme ("uploads") whether it's going to stick
around forever.
[1] https://www.linuxfoundation.jp/jp_uploads/seminar20070313/Randy.pdf
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The or.cz version of the Git wiki went away long ago, and
now just redirects to kernel.org.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many sites these days unconditionally redirect http requests
to their https equivalents. Let's make our links https in
the first place to save the client a redirect.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we see an error from split_cmdline(), we exit the
function without freeing the copy of the command string we
made.
This was sort-of introduced by 22e5ae5c8 (connect.c: handle
errors from split_cmdline, 2017-04-10). The leak existed
before that, but before that commit fixed the bug, we could
never trigger this else clause in the first place.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only caller of this function passes in a static buffer
returned from git_path(). This looks dangerous at first
glance, but turns out to be OK because the first thing we do
is xstrdup() the result.
Let's turn this into a git_pathdup(). That's slightly more
efficient (no extra copy), and makes it easier to audit for
dangerous git_path() invocations.
Since there's only a single caller, let's just set this
default path inside the init function. That makes the memory
ownership clear.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Writing directly into the strbuf avoids a useless copy of
the data, and dropping calls to git_path() makes it easier
to audit for dangerous calls.
Note that git_path() does an implicit strbuf_reset(), but in
each of these cases we were either already doing that reset,
or writing into a fresh strbuf anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's more efficient to use git_pathdup(), as it skips an
extra copy of the path. And by removing some calls to
git_path(), it makes it easier to audit for dangerous uses.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Long ago we added functions like git_path_merge_msg() to
replace the more dangerous git_path("MERGE_MSG"). Over time
some new calls to the latter have crept it. Let's convert
them to use the safer form.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than have a variable with a short name that is fed to
git_path(), let's add a helper function that returns the
full path. This avoids the dangerous git_path() function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This avoids using the dangerous git_path(). Right now
there's only one call site (because the writing half is
still part of the shell script), but it may come in handy in
the future as more of bisect is written in C. It also
matches how we access the other BISECT_* files.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing an interactive rebase in split-index mode,
the commit message that one should rework when squashing commits
can contain some garbage instead of the usual concatenation of
both of the commit messages.
The code uses git_path() to compute the shared index filename, and
passes it to check_and_freshen_file() as its argument; there is no
guarantee that the rotating pathname buffer passed as argument will
stay valid during the life of this call. Make our own copy before
calling the function and pass the copy as its argument to avoid this
risky pattern.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As explained in the document. This option has an advantage over the
command sequence "git worktree add && git worktree lock": there will be
no gap that somebody can accidentally "prune" the new worktree (or soon,
explicitly "worktree remove" it).
"worktree add" does keep a lock on while it's preparing the worktree.
If --lock is specified, this lock remains after the worktree is created.
Suggested-by: David Taylor <David.Taylor@dell.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signal handlers of the parent firing in the forked child may
have unintended side effects. Rather than auditing every signal
handler we have and will ever have, block signals while forking
and restore default signal handlers in the child before execve.
Restoring default signal handlers is required because
execve does not unblock signals, it only restores default
signal handlers. So we must restore them with sigprocmask
before execve, leaving a window when signal handlers
we control can fire in the child. Continue ignoring
ignored signals, but reset the rest to defaults.
Similarly, disable pthread cancellation to future-proof our code
in case we start using cancellation; as cancellation is
implemented with signals in glibc.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All non-Async-Signal-Safe functions (e.g. malloc and die) were removed
between 'fork' and 'exec' in start_command in order to avoid potential
deadlocking when forking while multiple threads are running. This
deadlocking is possible when a thread (other than the one forking) has
acquired a lock and didn't get around to releasing it before the fork.
This leaves the lock in a locked state in the resulting process with no
hope of it ever being released.
Add a note describing this potential pitfall before the call to 'fork()'
so people working in this section of the code know to only use
Async-Signal-Safe functions in the child process.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of our standard error handling paths have the potential to
call malloc or take stdio locks; so we must avoid them inside
the forked child.
Instead, the child only writes an 8 byte struct atomically to
the parent through the notification pipe to propagate an error.
All user-visible error reporting happens from the parent;
even avoiding functions like atexit(3) and exit(3).
Helped-by: Eric Wong <e@80x24.org>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to avoid allocation between 'fork()' and 'exec()' prepare the
environment to be used in the child process prior to forking.
Switch to using 'execve()' so that the construct child environment can
used in the exec'd process.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach string-list to be able to remove a string from a sorted
'struct string_list'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the function used to exec from 'execvp()' to 'execv()' as the (p)
variant of exec isn't async-signal-safe and has the potential to call malloc
during the path resolution it performs. Instead we simply do the path
resolution ourselves during the preparation stage prior to forking. There also
don't exist any portable (p) variants which also take in an environment to use
in the exec'd process. This allows easy migration to using 'execve()' in a
future patch.
Also, as noted in [1], in the event of an ENOEXEC the (p) variants of
exec will attempt to execute the command by interpreting it with the
'sh' utility. To maintain this functionality, if 'execv()' fails with
ENOEXEC, start_command will atempt to execute the command by
interpreting it with 'sh'.
[1] http://pubs.opengroup.org/onlinepubs/009695399/functions/exec.html
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to [1] we need to only call async-signal-safe operations between fork
and exec. Using malloc to build the argv array isn't async-signal-safe.
In order to avoid allocation between 'fork()' and 'exec()' prepare the
argv array used in the exec call prior to forking the process.
[1] http://pubs.opengroup.org/onlinepubs/009695399/functions/fork.html
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test to 't0061-run-command.sh' to ensure that run_command can
continue to execute scripts which don't include a '#!' line.
As shell scripts are not natively executable on Windows, we use a
workaround to check "#!" when running scripts from Git. As this
test requires the platform (not with Git's help) to run scripts
without "#!", skipt it on Windows.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hotfix for a topic that is already in 'master'.
* jh/memihash-opt:
p0004: make perf test executable
t3008: skip lazy-init test on a single-core box
test-online-cpus: helper to return cpu count
name-hash: fix buffer overrun
"git p4" used "name-rev HEAD" when it wants to learn what branch is
checked out; it should use "symbolic-ref HEAD".
* ld/p4-current-branch-fix:
git-p4: don't use name-rev to get current branch
git-p4: add read_pipe_text() internal function
git-p4: add failing test for name-rev rather than symbolic-ref
Call clear_pathspec() to release resources immediately before the
cmd_grep() function returns.
* ab/grep-plug-pathspec-leak:
grep: plug a trivial memory leak
Clean up fallouts from recent tightening of the set-up sequence,
where Git barfs when repository information is accessed without
first ensuring that it was started in a repository.
* jk/no-looking-at-dotgit-outside-repo:
test-read-cache: setup git dir
has_sha1_file: don't bother if we are not in a repository
The "submodule" specific field in the ref_store structure is
replaced with a more generic "gitdir" that can later be used also
when dealing with ref_store that represents the set of refs visible
from the other worktrees.
* nd/files-backend-git-dir: (28 commits)
refs.h: add a note about sorting order of for_each_ref_*
t1406: new tests for submodule ref store
t1405: some basic tests on main ref store
t/helper: add test-ref-store to test ref-store functions
refs: delete pack_refs() in favor of refs_pack_refs()
files-backend: avoid ref api targeting main ref store
refs: new transaction related ref-store api
refs: add new ref-store api
refs: rename get_ref_store() to get_submodule_ref_store() and make it public
files-backend: replace submodule_allowed check in files_downcast()
refs: move submodule code out of files-backend.c
path.c: move some code out of strbuf_git_path_submodule()
refs.c: make get_main_ref_store() public and use it
refs.c: kill register_ref_store(), add register_submodule_ref_store()
refs.c: flatten get_ref_store() a bit
refs: rename lookup_ref_store() to lookup_submodule_ref_store()
refs.c: introduce get_main_ref_store()
files-backend: remove the use of git_path()
files-backend: add and use files_ref_path()
files-backend: add and use files_reflog_path()
...
The diff options "--ours", "--theirs" exist for quite some time.
But so far they were not documented. Now they are.
* ah/diff-files-ours-theirs-doc:
diff-files: document --ours etc.
If a patch e-mail had its first paragraph after an in-body header
indented (even after a blank line after the in-body header line),
the indented line was mistook as a continuation of the in-body
header. This has been fixed.
* lt/mailinfo-in-body-header-continuation:
mailinfo: fix in-body header continuations
"git push --recurse-submodules --push-option=<string>" learned to
propagate the push option recursively down to pushes in submodules.
* bw/push-options-recursively-to-submodules:
push: propagate remote and refspec with --recurse-submodules
submodule--helper: add push-check subcommand
remote: expose parse_push_refspec function
push: propagate push-options with --recurse-submodules
push: unmark a local variable as static
Conversion from unsigned char [40] to struct object_id continues.
* bc/object-id:
Documentation: update and rename api-sha1-array.txt
Rename sha1_array to oid_array
Convert sha1_array_for_each_unique and for_each_abbrev to object_id
Convert sha1_array_lookup to take struct object_id
Convert remaining callers of sha1_array_lookup to object_id
Make sha1_array_append take a struct object_id *
sha1-array: convert internal storage for struct sha1_array to object_id
builtin/pull: convert to struct object_id
submodule: convert check_for_new_submodule_commits to object_id
sha1_name: convert disambiguate_hint_fn to take object_id
sha1_name: convert struct disambiguate_state to object_id
test-sha1-array: convert most code to struct object_id
parse-options-cb: convert sha1_array_append caller to struct object_id
fsck: convert init_skiplist to struct object_id
builtin/receive-pack: convert portions to struct object_id
builtin/pull: convert portions to struct object_id
builtin/diff: convert to struct object_id
Convert GIT_SHA1_RAWSZ used for allocation to GIT_MAX_RAWSZ
Convert GIT_SHA1_HEXSZ used for allocation to GIT_MAX_HEXSZ
Define new hash-size constants for allocating memory
The output from "git status --short" has been extended to show
various kinds of dirtyness in submodules differently; instead of to
"M" for modified, 'm' and '?' can be shown to signal changes only
to the working tree of the submodule but not the commit that is
checked out.
* sb/submodule-short-status:
submodule.c: correctly handle nested submodules in is_submodule_modified
short status: improve reporting for submodule changes
submodule.c: stricter checking for submodules in is_submodule_modified
submodule.c: port is_submodule_modified to use porcelain 2
submodule.c: convert is_submodule_modified to use strbuf_getwholeline
submodule.c: factor out early loop termination in is_submodule_modified
submodule.c: use argv_array in is_submodule_modified
Teach has_dir_name() to see if the path of the new item
is greater than the last path in the index array before
attempting to search for it.
has_dir_name() is looking for file/directory collisions
in the index and has to consider each sub-directory
prefix in turn. This can cause multiple binary searches
for each path.
During operations like checkout, merge_working_tree()
populates the new index in sorted order, so we expect
to be able to append in many cases.
This commit is part 2 of 2. This commit handles the
additional possible short-cuts as we look at each
sub-directory prefix.
The net-net gains for add_index_entry_with_check() and
both had_dir_name() commits are best seen for very
large repos.
Here are results for an INFLATED version of linux.git
with 1M files.
$ GIT_PERF_REPO=/mnt/test/linux_inflated.git/ ./run upstream/base HEAD ./p0006-read-tree-checkout.sh
Test upstream/base HEAD
0006.2: read-tree br_base br_ballast (1043893) 3.79(3.63+0.15) 2.68(2.52+0.15) -29.3%
0006.3: switch between br_base br_ballast (1043893) 7.55(6.58+0.44) 6.03(4.60+0.43) -20.1%
0006.4: switch between br_ballast br_ballast_plus_1 (1043893) 10.84(9.26+0.59) 8.44(7.06+0.65) -22.1%
0006.5: switch between aliases (1043893) 10.93(9.39+0.58) 10.24(7.04+0.63) -6.3%
Here are results for a synthetic repo with 4.2M files.
$ GIT_PERF_REPO=~/work/gfw/t/perf/repos/gen-many-files-10.4.3.git/ ./run HEAD~3 HEAD ./p0006-read-tree-checkout.sh
Test HEAD~3 HEAD
0006.2: read-tree br_base br_ballast (4194305) 29.96(19.26+10.50) 23.76(13.42+10.12) -20.7%
0006.3: switch between br_base br_ballast (4194305) 56.95(36.08+16.83) 45.54(25.94+15.68) -20.0%
0006.4: switch between br_ballast br_ballast_plus_1 (4194305) 90.94(51.50+31.52) 78.22(39.39+30.70) -14.0%
0006.5: switch between aliases (4194305) 93.72(51.63+34.09) 77.94(39.00+30.88) -16.8%
Results for medium repos (like linux.git) are mixed and have
more variance (probably do to disk IO unrelated to this test.
$ GIT_PERF_REPO=/mnt/test/linux.git/ ./run HEAD~3 HEAD ./p0006-read-tree-checkout.sh
Test HEAD~3 HEAD
0006.2: read-tree br_base br_ballast (57994) 0.25(0.21+0.03) 0.20(0.17+0.02) -20.0%
0006.3: switch between br_base br_ballast (57994) 10.67(6.06+2.92) 10.51(5.94+2.91) -1.5%
0006.4: switch between br_ballast br_ballast_plus_1 (57994) 0.59(0.47+0.16) 0.52(0.40+0.13) -11.9%
0006.5: switch between aliases (57994) 0.59(0.44+0.17) 0.51(0.38+0.14) -13.6%
$ GIT_PERF_REPO=/mnt/test/linux.git/ ./run HEAD~3 HEAD ./p0006-read-tree-checkout.sh
Test HEAD~3 HEAD
0006.2: read-tree br_base br_ballast (57994) 0.24(0.21+0.02) 0.21(0.18+0.02) -12.5%
0006.3: switch between br_base br_ballast (57994) 10.42(5.98+2.91) 10.66(5.86+3.09) +2.3%
0006.4: switch between br_ballast br_ballast_plus_1 (57994) 0.59(0.49+0.13) 0.53(0.37+0.16) -10.2%
0006.5: switch between aliases (57994) 0.59(0.43+0.17) 0.50(0.37+0.14) -15.3%
Results for smaller repos (like git.git) are not significant.
$ ./run HEAD~3 HEAD ./p0006-read-tree-checkout.sh
Test HEAD~3 HEAD
0006.2: read-tree br_base br_ballast (3043) 0.01(0.00+0.00) 0.01(0.00+0.00) +0.0%
0006.3: switch between br_base br_ballast (3043) 0.31(0.17+0.11) 0.29(0.19+0.08) -6.5%
0006.4: switch between br_ballast br_ballast_plus_1 (3043) 0.03(0.02+0.00) 0.03(0.02+0.00) +0.0%
0006.5: switch between aliases (3043) 0.03(0.02+0.00) 0.03(0.02+0.00) +0.0%
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach has_dir_name() to see if the path of the new item
is greater than the last path in the index array before
attempting to search for it.
has_dir_name() is looking for file/directory collisions
in the index and has to consider each sub-directory
prefix in turn. This can cause multiple binary searches
for each path.
During operations like checkout, merge_working_tree()
populates the new index in sorted order, so we expect
to be able to append in many cases.
This commit is part 1 of 2. This commit handles the top
of has_dir_name() and the trivial optimization.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach add_index_entry_with_check() to see if the path
of the new item is greater than the last path in the
index array before attempting to search for it.
During checkout, merge_working_tree() populates the new
index in sorted order, so this change will save a binary
lookups per file. This preserves the original behavior
but simply checks the last element before starting the
search.
This helps performance on very large repositories.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Created t/perf/repos/many-files.sh to generate large, but
artificial repositories.
Created t/perf/inflate-repo.sh to alter an EXISTING repo
to have a set of large commits. This can be used to create
a branch with 1M+ files in repositories like git.git or
linux.git, but with more realistic content. It does this
by making multiple copies of the entire worktree in a series
of sub-directories.
The branch name and ballast structure created by both scripts
match, so either script can be used to generate very large
test repositories for the following perf test.
Created t/perf/p0006-read-tree-checkout.sh to measure
performance on various read-tree, checkout, and update-index
operations. This test can run using either normal repos or
ones from the above scripts.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add more structure and describe each possible option in a self-contained
way, not referring to any of the previously described options.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document & test for cases where there are two remotes pointing to the
same URL, and a background fetch & subsequent `git push
--force-with-lease` shouldn't clobber un-updated references we haven't
fetched.
Some editors like Microsoft's VSC have a feature to auto-fetch in the
background, this bypasses the protections offered by
--force-with-lease & --force-with-lease=<refname>, as noted in the
documentation being added here.
See the 'Tools that do an automatic fetch defeat "git push
--force-with-lease"' (<1491617750.2149.10.camel@mattmccutchen.net>)
git mailing list thread for more details. Jakub Narębski suggested
this method of adding another remote to bypass this edge case,
document that & add a test for it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Config file reading order is important because each file can override
values in the previous files and this is expected behavior. Normally
we read in this order, all in do_git_config_sequence():
1. $HOME/.gitconfig
2. $GIT_DIR/config
3. config from command line
However in read_early_config() the order may be swapped a bit if
setup_git_directory() has not been called:
1. $HOME/.gitconfig
2. $GIT_DIR/config is NOT read because .git dir is not found _yet_
3. config from command line
4. $GIT_DIR/config is now READ (after discover_git_directory() call)
The reading at step 4 could override config at step 3, which is not
the expectation.
Now that we could pass the .git dir around, we could feed
discover_git_directory() back to step 2, so that it works again, and
remove step 4.
Noticed-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The post-update hooks created in t5550-http-fetch-dumb.sh is missing the
"!#/bin/sh" line which can cause issues with portability. Instead
create the hook using the 'write_script' function which includes the
proper "#!" line.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it easy to sign off a whole patchset before submission.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the full hostname doesn't fit in the buffer supplied to
gethostname, POSIX does not specify whether the buffer will be
null-terminated, so to be safe, we should do it ourselves. Introduce
new function, xgethostname, which ensures that there is always a \0
at the end of the buffer.
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX limits the length of host names to HOST_NAME_MAX. Export the
fallback definition from daemon.c and use this constant to make all
buffers used with gethostname(2) big enough for any possible result
and a terminating NUL.
Inspired-by: David Turner <dturner@twosigma.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: David Turner <dturner@twosigma.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It looks like in 89c3b0ad43 (name-hash: add perf test for lazy_init_name_hash,
2017-03-23) p0004 was not created with the execute unix rights.
Let's fix that.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't assume that the current working directory is the root of the
repository. Correctly generate the path for the recursing child
processes by building it from the work_tree() root instead. Otherwise if
we run ls-files using --git-dir or --work-tree it will not work
correctly as it attempts to change directory into a potentially invalid
location. Best case, it doesn't exist and we produce an error. Worst
case we cd into the wrong location and unknown behavior occurs.
Add a new test which highlights this possibility.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent update to for_each_replace_name() to make it use a strbuf in
place of a fixed buffer forgot to release the memory held by the
strbuf before leaving the function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If setup_git_directory() and friends have not been called,
get_git_dir() (because of includeIf.gitdir:XXX) would lead to
die("BUG: setup_git_env called without repository");
There are two cases when a config file could be read before $GIT_DIR
is located.
The first one is check_repository_format(), where we read just the one
file $GIT_DIR/config to check if we could understand this
repository. This case should be safe. We do not parse include
directives, which can only be triggered from git_config_with_options,
but setup code uses a lower-level function. The concerned variables
should never be hidden away behind includes anyway.
The second one is triggered in check_pager_config() when we're about
to run an external git command. We might be able to find $GIT_DIR in
this case, which is exactly what read_early_config() does (and also is
what check_pager_config() uses). Conditional includes and
get_git_dir() could be triggered by the first
git_config_with_options() call there, before discover_git_directory()
is used as a fallback $GIT_DIR detection.
Detect this special "early reading" case, pass down the $GIT_DIR,
either from previous setup or detected by discover_git_directory(),
and make conditional include use it.
Noticed-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far we can only pass one flag, respect_includes, to thie function. We
need to pass some more (non-flag even), so let's make it accept a struct
instead of an integer.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit e77aa336f1 ("ls-files: optionally recurse into
submodules", 2016-10-07) ls-files has known how to recurse into
submodules when displaying files.
Unfortunately this fails for certain cases, including when nesting more
than one submodule, called from within a submodule that itself has
submodules, or when the GIT_DIR environemnt variable is set.
Prior to commit b58a68c1c1 ("setup: allow for prefix to be passed to
git commands", 2017-03-17) this resulted in an error indicating that
--prefix and --super-prefix were incompatible.
After this commit, instead, the process loops forever with a GIT_DIR set
to the parent and continuously reads the parent submodule files and
recursing forever.
Fix this by preparing the environment properly for submodules when
setting up the child process. This is similar to how other commands such
as grep behave.
This was not caught by the original tests because the scenario is
avoided if the submodules are created separately and not stored as the
standard method of putting the submodule git directory under
.git/modules/<name>. We can update the test to show the failure by the
addition of "git submodule absorbgitdirs" to the test case. However,
note that this new test would run forever without the necessary fix in
this patch.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, fetch-pack prints a confusing error message ("expected
ACK/NAK") when the server it's communicating with sends a pkt-line
starting with "ERR". Replace it with a less confusing error message.
Also update the documentation describing the fetch-pack/upload-pack
protocol (pack-protocol.txt) to indicate that "ERR" can be sent in the
place of "ACK" or "NAK". In practice, this has been done for quite some
time by other Git implementations (e.g. JGit sends "want $id not valid")
and by Git itself (since commit bdb31ea: "upload-pack: report "not our
ref" to client", 2017-02-23) whenever a "want" line references an object
that it does not have. (This is uncommon, but can happen if a repository
is garbage-collected during a negotiation.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an error occurs when or after closing the stream we call fclose(3)
again in the error handler. The second call can exhibit undefined
behavior, so make sure to call fclose(3) at most once. Also avoid
calling close(2) after fd has been successfully associated with the
stream, as fclose(3) has become responsible for doing that beyond
this point.
Found with Cppcheck.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exit the loop orderly through the cleanup code, instead of dashing out
with logfp still open and sb leaking.
Found with Cppcheck.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Structure calls as
test_expect_success 'description' '
body
'
Use double quotes for the description if it requires parameter
expansion or contains a single quote.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given that other instances of "{...}" in the revision documentation
represent literal characters of revision specifications, describing
the rev^-n shorthand as "<rev>^-{<n>}" incorrectly suggests that
something like "master^-{1}" is an acceptable form.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update an error message.
* sb/unpack-trees-would-lose-submodule-message-update:
unpack-trees.c: align submodule error message to the other error messages
Update the build dependency so that an update to /usr/bin/perl
etc. result in recomputation of perl.mak file.
* ab/regen-perl-mak-with-different-perl:
perl: regenerate perl.mak if perl -V changes
"git diff --submodule=diff" learned to work better in a project
with a submodule that in turn has its own submodules.
* sb/show-diff-for-submodule-in-diff-fix:
diff: submodule inline diff to initialize env array.
Update error handling for codepath that deals with corrupt loose
objects.
* jk/loose-object-info-report-error:
index-pack: detect local corruption in collision check
sha1_loose_object_info: return error for corrupted objects
Code clean-up.
* jk/snprintf-cleanups:
daemon: use an argv_array to exec children
gc: replace local buffer with git_path
transport-helper: replace checked snprintf with xsnprintf
convert unchecked snprintf into xsnprintf
combine-diff: replace malloc/snprintf with xstrfmt
replace unchecked snprintf calls with heap buffers
receive-pack: print --pack-header directly into argv array
name-rev: replace static buffer with strbuf
create_branch: use xstrfmt for reflog message
create_branch: move msg setup closer to point of use
avoid using mksnpath for refs
avoid using fixed PATH_MAX buffers for refs
fetch: use heap buffer to format reflog
tag: use strbuf to format tag header
diff: avoid fixed-size buffer for patch-ids
odb_mkstemp: use git_path_buf
odb_mkstemp: write filename into strbuf
do not check odb_mkstemp return value for errors
Use reference iteration rather than `do_for_each_entry_in_dir()` in
the definition of `files_pack_refs()`. This makes the code shorter and
easier to follow, because the logic can be inline rather than spread
between the main function and a callback function, and it removes the
need to use `pack_refs_cb_data` to preserve intermediate state.
This removes the last callers of `entry_resolves_to_object()` and
`get_loose_ref_dir()`, so delete those functions.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use reference iteration rather than do_for_each_entry_in_dir() in the
definition of commit_packed_refs().
Note that an internal consistency check that was previously done in
`write_packed_entry_fn()` is not there anymore. This is actually an
improvement:
The old error message was emitted when there is an entry in the
packed-ref cache that is not `REF_KNOWS_PEELED`, and when we attempted
to peel the reference, the result was `PEEL_INVALID`,
`PEEL_IS_SYMREF`, or `PEEL_BROKEN`. Since a packed ref cannot be a
symref, `PEEL_IS_SYMREF` and `PEEL_BROKEN` can be ruled out. So we're
left with `PEEL_INVALID`.
An entry without `REF_KNOWS_PEELED` can get into the packed-refs cache
in the following two ways:
* The reference was read from a `packed-refs` file that didn't have
the `fully-peeled` attribute. In that case, we *don't want* to emit
an error, because the broken value is presumably a stale value of
the reference that is now masked by a loose version of the same
reference (which we just don't happen to be packing this time). This
is a perfectly legitimate situation and doesn't indicate that the
repository is corrupt. The old code incorrectly emits an error
message in this case. (It was probably never reported as a bug
because this scenario is rare.)
* The reference was a loose reference that was just added to the
packed ref cache by `files_packed_refs()` via
`pack_if_possible_fn()` in preparation for being packed. The latter
function refuses to pack a reference for which
`entry_resolves_to_object()` returns false, and otherwise calls
`peel_entry()` itself and checks the return value. So an entry added
this way should always have `REF_KNOWS_PEELED` and shouldn't trigger
the error message in either the old code or the new.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change `cache_ref_iterator_begin()` to take two new arguments:
* `prefix` -- to iterate only over references with the specified
prefix.
* `prime_dir` -- to "prime" (i.e., pre-load) the cache before starting
the iteration.
The new functionality makes it possible for
`files_ref_iterator_begin()` to be made more ignorant of the internals
of `ref_cache`, and `find_containing_dir()` and `prime_ref_dir()` to
be made private.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract a new function, `get_loose_ref_cache()`, from
get_loose_ref_dir(). The function returns the `ref_cache` for the
loose refs of a `files_ref_store`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new name is more analogous to `get_packed_ref_dir()`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
That "refs/bisect/" has to be handled specially when filling the
ref_cache for loose references is a peculiarity of the files backend,
and the ref-cache code shouldn't need to know about it. So move this
code to the callback function, `loose_fill_ref_dir()`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a leveling violation for `ref_cache` to know about
`files_ref_store` or that it should call `read_loose_refs()` to lazily
fill cache directories. So instead, have its constructor take as an
argument a callback function that it should use for lazy-filling, and
change `files_ref_store` to supply a pointer to function
`read_loose_refs` (renamed to `loose_fill_ref_dir`) when creating the
ref cache for its loose refs.
This means that we can generify the type of the back-pointer in
`struct ref_cache` from `files_ref_store` to `ref_store`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of keeping a pointer to the `ref_store` in every `ref_dir`
entry, store it once in `struct ref_cache`, and change `struct
ref_dir` to include a pointer to its containing `ref_cache` instead.
This makes it easier to add to the information that is accessible from
a `ref_dir` without increasing the size of every `ref_dir` instance.
Note that previously, every `ref_dir` pointed at the containing
`files_ref_store` regardless of whether it was a part of the loose or
packed reference cache. Now we have to be sure to initialize the
instances to point at the correct containing `ref_cache`. So change
`create_dir_entry()` to take a `ref_cache` parameter, and change its
callers to pass the correct `ref_cache` depending on the purpose of
the new `dir_entry`.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For now, it just wraps a `ref_entry *` that points at the root of the
tree. Soon it will hold more information.
Add two new functions, `create_ref_cache()` and `free_ref_cache()`.
Make `free_ref_entry()` private.
Change files-backend to use this type to hold its caches.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `ref_cache` code is currently too tightly coupled to
`files-backend`, making the code harder to understand and making it
awkward for new code to use `ref_cache` (as we indeed have planned).
Start loosening that coupling by splitting `ref_cache` into a separate
module.
This commit moves code, adds declarations, and changes the visibility
of some functions, but doesn't change any code.
The modules are still too tightly coupled, but the situation will be
improved in subsequent commits.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function's visibility is about to be increased, so give it a more
distinctive name.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function's visibility is about to be increased, so give it a more
distinctive name.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function's visibility is about to be increased, so give it a more
distinctive name.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change `lock_raw_ref()` and `lock_ref_sha1_basic()` to use
`refs_verify_refname_available()` instead of
`verify_refname_available_dir()`. This means that those callsites now
check for conflicts with all references rather than just packed refs,
but the performance cost shouldn't be significant (and will be
regained later).
These were the last callers of `verify_refname_available_dir()`, so
also delete that (very complicated) function.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It turns out that we can now implement
`refs_verify_refname_available()` based on the other virtual
functions, so there is no need for it to be defined at the backend
level. Instead, define it once in `refs.c` and remove the
`files_backend` definition.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid closing stdin, but do close an actual input file on error exit.
Found with Cppcheck.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no more direct calls to am_signoff(), so we can fold its
logic in am_append_signoff().
(This is done in a separate commit rather than in the previous one, to
make it easier to revert this specific change if additional calls are
ever introduced.)
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signoff is handled in parse_mail(), but not in parse_mail_rebasing(),
since the latter is only used when git-rebase calls git-am with the
--rebasing option, and --signoff is never passed in this case.
In order to introduce (in the upcoming commits) support for
`git-rebase --signoff`, we must make git-am pay attention to it also
in the rebase case. This can be done by moving the conditional
addition of the signoff from parse_mail() to the caller am_run(),
after either of the parse_mail*() functions were called.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4 was using "git name-rev" to find out the current branch.
That is not safe, since if multiple branches or tags point at
the same revision, the result obtained might not be what is
expected.
Instead use "git symbolic-ref".
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing read_pipe() function returns an empty string on
error, but also returns an empty string if the command returns
an empty string.
This leads to ugly constructions trying to detect error cases.
Add read_pipe_text() which just returns None on error.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using name-rev to find the current git branch means that git-p4
does not correctly get the current branch name if there are
multiple branches pointing at HEAD, or a tag.
This change adds a test case which demonstrates the problem.
Configuring which branches are allowed to be submitted from goes
wrong, as git-p4 gets confused about which branch is in use.
This appears to be the only place that git-p4 actually cares
about the current branch.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When attempting to add a submodule with backslashes in its name 'git
submodule' fails in a funny way. We can see that some of the
backslashes are expanded resulting in a bogus path:
git -C main submodule add ../sub\\with\\backslash
fatal: repository '/tmp/test/sub\witackslash' does not exist
fatal: clone of '/tmp/test/sub\witackslash' into submodule path
To solve this, convert calls to 'read' to 'read -r' in git-submodule.sh
in order to prevent backslash expantion in submodule names.
Reported-by: Joachim Durchholz <jo@durchholz.org>
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b1ef400e (setup_git_env: avoid blind fall-back to ".git") made programs
that tried to access a repository without initializing properly die with
a diagnostic message. One offender is test-read-cache, which is used in
p0002. Fix it by calling setup_git_directory() before accessing the
index.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As documented in git-receive-pack(1), updating a ref from
within the pre-receive hook is dangerous and can corrupt
your repo. This patch forbids ref updates entirely during
the hook to make it harder for adventurous hook writers to
shoot themselves in the foot.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 722ff7f87 (receive-pack: quarantine objects until
pre-receive accepts, 2016-10-03) changed the underlying
details of how we take in objects. This is mostly
transparent to the user, but there are a few things they
might notice. Let's document them.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 722ff7f87 (receive-pack: quarantine objects until
pre-receive accepts, 2016-10-03), we have to feed the
pre-receive hook the tmp_objdir environment, so that git
programs run from the hook know where to find the objects.
That commit modified run_update_hook() to do the same, but
there it is a noop. By the time we get to the update hooks,
we have already migrated the objects from quarantine, and so
tmp_objdir_env() will always return NULL. We can drop this
useless call.
Note that the ordering here and the lack of support for the
update hook is intentional. The update hook calls are
interspersed with actual ref updates, and we must migrate
the objects before any refs are updated (since otherwise
those refs would appear broken to outside processes). So the
only other options are:
- remain in quarantine for the _first_ ref, but not the
others. This is sufficiently confusing that it can be
rejected outright.
- run all the individual update hooks first, then migrate,
then update all the refs. But this changes the repository
state that the update hooks see (i.e., whether or not
refs from the same push are updated yet or not).
So the functionality is fine and remains unchanged with this
patch; we're just cleaning up a useless and confusing line
of code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last test in 't6500-gc', 'background auto gc does not run if
gc.log is present and recent but does if it is old', added in
a831c06a2 (gc: ignore old gc.log files, 2017-02-10), may sporadically
trigger an error message from the test harness:
rm: cannot remove 'trash directory.t6500-gc/.git/objects': Directory not empty
The test in question ends with executing an auto gc in the backround,
which occasionally takes so long that it's still running when
'test_done' is about to remove the trash directory. This 'rm -rf
$trash' in the foreground might race with the detached auto gc to
create and delete files and directories, and gc might (re-)create a
path that 'rm' already visited and removed, triggering the above error
message when 'rm' attempts to remove its parent directory.
Commit bb05510e5 (t5510: run auto-gc in the foreground, 2016-05-01)
fixed the same problem in a different test script by simply
disallowing background gc. Unfortunately, what worked there is not
applicable here, because the purpose of this test is to check the
behavior of a detached auto gc.
Make sure that the test doesn't continue before the gc is finished in
the background with a clever bit of shell trickery:
- Open fd 9 in the shell, to be inherited by the background gc
process, because our daemonize() only closes the standard fds 0,
1 and 2.
- Duplicate this fd 9 to stdout.
- Read 'git gc's stdout, and thus fd 9, through a command
substitution. We don't actually care about gc's output, but this
construct has two useful properties:
- This read blocks until stdout or fd 9 are open. While stdout is
closed after the main gc process creates the background process
and exits, fd 9 remains open until the backround process exits.
- The variable assignment from the command substitution gets its
exit status from the command executed within the command
substitution, i.e. a failing main gc process will cause the test
to fail.
Note, that this fd trickery doesn't work on Windows, because due to
MSYS limitations the git process only inherits the standard fds 0, 1
and 2 from the shell. Luckily, it doesn't matter in this case,
because on Windows daemonize() is basically a noop, thus 'git gc
--auto' always runs in the foreground.
And since we can now continue the test reliably after the detached gc
finished, check that there is only a single packfile left at the end,
i.e. that the detached gc actually did what it was supposed to do.
Also add a comment at the end of the test script to warn developers of
future tests about this issue of long running detached gc processes.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 'clear_pathspec()' the incorrect index parameter is used to bound an
inner-loop which is used to free a 'struct attr_match' value field.
Using the incorrect index parameter (in addition to being incorrect)
occasionally causes segmentation faults when attempting to free an
invalid pointer. Fix this by using the correct index parameter 'i'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the cleanup phase for the grep command to free the pathspec
struct that's allocated earlier in the same block, and used just a few
lines earlier.
With "grep hi README.md" valgrind reports a loss of 239 bytes now,
down from 351.
The relevant --num-callers=40 --leak-check=full --show-leak-kinds=all
backtrace is:
[...] 187 (112 direct, 75 indirect) bytes in 1 blocks are definitely lost in loss record 70 of 110
[...] at 0x4C2BBAF: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
[...] by 0x60B339: do_xmalloc (wrapper.c:59)
[...] by 0x60B2F6: xmalloc (wrapper.c:86)
[...] by 0x576B37: parse_pathspec (pathspec.c:652)
[...] by 0x4519F0: cmd_grep (grep.c:1215)
[...] by 0x4062EF: run_builtin (git.c:371)
[...] by 0x40544D: handle_builtin (git.c:572)
[...] by 0x4060A2: run_argv (git.c:624)
[...] by 0x4051C6: cmd_main (git.c:701)
[...] by 0x4C5901: main (common-main.c:43)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e9d9a8a4d (connect: handle putty/plink also in
GIT_SSH_COMMAND, 2017-01-02) added a call to
split_cmdline(), but checks only for a non-zero return to
see if we got any output. Since the function returns
negative values (and a NULL argv) on error, we end up
dereferencing NULL and segfaulting.
Arguably we could report on the parsing error here, but it's
probably not worth it. This is a best-effort attempt to see
if we are using plink. So we can simply return here with
"no, it wasn't plink" and let the shell actually complain
about the bogus quoting.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a dedicated build job for static analysis. As a starter we only run
coccicheck but in the future we could run Clang Static Analyzer or
similar tools, too.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
TravisCI does not need to setup any compiler for the documentation
build. Clear the value to fix this.
The Linux32 build job does not define the compiler but it inherits the
value from the base job. Since it does not need the compiler either
because the build runs inside a Docker container we should clear this,
too.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation job without parallelization takes ~10min on TravisCI.
With parallelization ("--jobs=2") it takes ~6min.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ec3366e introduced a knob to enable the use of Asciidoctor in addition
to AsciiDoc. Build the documentation on TravisCI with this knob to
reduce the likeliness of breaking Asciidoctor support in the future.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach traverse_trees_recursive() to not do redundant ODB
lookups when both directories refer to the same OID.
In operations such as read-tree and checkout, there will
likely be many peer directories that have the same OID when
the differences between the commits are relatively small.
In these cases we can avoid hitting the ODB multiple times
for the same OID.
This patch handles n=2 and n=3 cases and simply copies the
data rather than repeating the fill_tree_descriptor().
================
On the Windows repo (500K trees, 3.1M files, 450MB index),
this reduced the overall time by 0.75 seconds when cycling
between 2 commits with a single file difference.
(avg) before: 22.699
(avg) after: 21.955
===============
================
On Linux using p0006-read-tree-checkout.sh with linux.git:
Test HEAD^ HEAD
-------------------------------------------------------------------------------------------------------
0006.2: read-tree br_base br_ballast (57994) 0.24(0.20+0.03) 0.24(0.22+0.01) +0.0%
0006.3: switch between br_base br_ballast (57994) 10.58(6.23+2.86) 10.67(5.94+2.87) +0.9%
0006.4: switch between br_ballast br_ballast_plus_1 (57994) 0.60(0.44+0.17) 0.57(0.44+0.14) -5.0%
0006.5: switch between aliases (57994) 0.59(0.48+0.13) 0.57(0.44+0.15) -3.4%
================
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add strcmp_offset() function to also return the offset of the
first change.
Add unit test and helper to verify.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use ALLOC_GROW() macro when reallocing a string_list array
rather than simply increasing it by 32. This is a performance
optimization.
During status on a very large repo and there are many changes,
a significant percentage of the total run time is spent
reallocing the wt_status.changes array.
This change decreases the time in wt_status_collect_changes_worktree()
from 125 seconds to 45 seconds on my very large repository.
This produced a modest gain on my 1M file artificial repo, but
broke even on linux.git.
Test HEAD^^ HEAD
---------------------------------------------------------------------------------------
0005.2: read-tree status br_ballast (1000001) 8.29(5.62+2.62) 8.22(5.57+2.63) -0.8%
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git to skip verification of the SHA1-1 checksum at the end of
the index file in verify_hdr() which is called from read_index()
unless the "force_verify_index_checksum" global variable is set.
Teach fsck to force this verification.
The checksum verification is for detecting disk corruption, and for
small projects, the time it takes to compute SHA-1 is not that
significant, but for gigantic repositories this calculation adds
significant time to every command.
These effect can be seen using t/perf/p0002-read-cache.sh:
Test HEAD~1 HEAD
--------------------------------------------------------------------------------------
0002.1: read_cache/discard_cache 1000 times 0.66(0.44+0.20) 0.30(0.27+0.02) -54.5%
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous to commit 5d8f084a5 (pathspec: simpler logic to prefix original
pathspec elements, 2017-01-04), we were always using the computed
`match` variable to perform pathspec matching whenever
`PATHSPEC_PREFIX_ORIGIN` is set. This is for example useful when passing
the parsed pathspecs to other commands, as the computed `match` may
contain a pathspec relative to the repository root. The commit changed
this logic to only do so when we do have an actual prefix and when
literal pathspecs are deactivated.
But this change may actually break some commands which expect passed
pathspecs to be relative to the repository root. One such case is `git
add --patch`, which now fails when using relative paths from a
subdirectory. For example if executing "git add -p ../foo.c" in a
subdirectory, the `git-add--interactive` command will directly pass
"../foo.c" to `git-ls-files`. As ls-files is executed at the
repository's root, the command will notice that "../foo.c" is outside
the repository and fail.
Fix the issue by again using the computed `match` variable when
`PATHSPEC_PREFIX_ORIGIN` is set and global literal pathspecs are
deactivated. Note that in contrast to previous behavior, we will now
always call `prefix_magic` regardless of whether a prefix is actually
set. But this is the right thing to do: when the `match` variable has
been resolved to the repository's root, it will be set to an empty
string. When passing the empty string directly to other commands, it
will result in a warning regarding deprecated empty pathspecs. By always
adding the prefix magic, we will end up with at least the string
":(prefix:0)" and thus avoid the warning.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Acked-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Duy Nguyen <pclouds@gmail.com>
$GIT_DIR returned by get_git_dir() is normalized, with all symlinks
resolved (see setup_work_tree function). In order to match paths (or
patterns) against $GIT_DIR char-by-char, they have to be normalized
too. There is a note in config.txt about this, that the user need to
resolve symlinks by themselves if needed.
The problem is, we allow certain path expansion, '~/' and './', for
convenience and can't ask the user to resolve symlinks in these
expansions. Make sure the expanded paths have all symlinks resolved.
PS. The strbuf_realpath(&text, get_git_dir(), 1) is still needed because
get_git_dir() may return relative path.
Noticed-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next patch we need the ability to expand '~' to
real_path($HOME). But we can't do that from outside because '~' is part
of a pattern, not a true path. Add an option to expand_user_path() to do
so.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whenever a git command is present in the upstream of a pipe, its failure
gets masked by piping. Hence we should avoid it for testing the
upstream git command. By writing out the output of the git command to
a file, we can test the exit codes of both the commands as a failure exit
code in any command is able to stop the && chain.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract a new function from `do_for_each_ref()`. It will be useful
elsewhere.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract a new function from `refs_resolve_ref_unsafe()`. It will be
useful elsewhere.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since references under "refs/bisect/" are per-worktree, they have to
be sought in the worktree rather than in the main repository. But
since loose references are found by traversing directories, the
reference iterator won't even get the idea to look for a
"refs/bisect/" directory in the worktree if there is not a directory
with that name in the main repository. Thus `get_ref_dir()` manually
inserts a dir_entry for "refs/bisect/" whenever it reads the entry for
"refs/".
The current code then immediately calls `read_loose_refs()` on that
directory. But since the dir_entry is created with its `incomplete`
flag set, any traversal that gets to this point will read the
directory automatically. So there is no need to call
`read_loose_refs()` explicitly; the lazy mechanism suffices.
And in fact, the attempt to `read_loose_refs()` was broken anyway.
That function needs its `dirname` argument to have a trailing `/`
character, but the invocation here was passing it "refs/bisect"
without a trailing slash. So `read_loose_refs()` would read
`$GIT_DIR/refs/bisect" correctly, but if it found an entry "foo" in
that directory, it would try to read "$GIT_DIR/refs/bisectfoo".
Normally it wouldn't find anything at that path, but the failure was
canceled out because `get_ref_dir()` *also* forgot to reset the
`REF_INCOMPLETE` bit on the dir_entry. So the read was attempted again
when it was accessed, via the lazy mechanism, and this time the read
was done correctly.
This code has been broken since it was first introduced.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It only has one caller, not worth keeping just for convenience.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A small step towards making files-backend work as a non-main ref store
using the newly added store-aware API.
For the record, `join` and `nm` on refs.o and files-backend.o tell me
that files-backend no longer uses functions that default to
get_main_ref_store().
I'm not yet comfortable at the idea of removing
files_assert_main_repository() (or converting REF_STORE_MAIN to
REF_STORE_WRITE). More staring and testing is required before that can
happen. Well, except peel_ref(). I'm pretty sure that function is safe.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The transaction struct now takes a ref store at creation and will
operate on that ref store alone.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is not meant to cover all existing API. It adds enough to test ref
stores with the new test program test-ref-store, coming soon and to be
used by files-backend.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is intended to replace *_submodule() refs API. It provides
a ref store for a specific submodule, which can be operated on by a new
set of refs API.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
files-backend.c is unlearning submodules. Instead of having a specific
check for submodules to see what operation is allowed, files backend
now takes a set of flags at init. Each operation will check if the
required flags is present before performing.
For now we have four flags: read, write and odb access. Main ref store
has all flags, obviously, while submodule stores are read-only and have
access to odb (*).
The "main" flag stays because many functions in the backend calls
frontend ones without a ref store, so these functions always target the
main ref store. Ideally the flag should be gone after ref-store-aware
api is in place and used by backends.
(*) Submodule code needs for_each_ref. Try take REF_STORE_ODB flag
out. At least t3404 would fail. The "have access to odb" in submodule is
a bit hacky since we don't know from he whether add_submodule_odb() has
been called.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most callers to this function already require that they are in a
git repository, but there is an exception: "git apply" uses
has_sha1_file to avoid work if the result of applying a binary
patch is already present in the repository. When run outside any
repository, this produces an error:
fatal: BUG: setup_git_env called without repository
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unfortunately, in order to push some large repos where a server does
not support chunked encoding, the http postbuffer must sometimes
exceed two gigabytes. On a 64-bit system, this is OK: we just malloc
a larger buffer.
This means that we need to use CURLOPT_POSTFIELDSIZE_LARGE to set the
buffer size.
Signed-off-by: David Turner <dturner@twosigma.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One message appears twice in the translations and the only
difference is a dot at the end. So add this dot to make
the messages being identical.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The left and right base directories were pointed to the buf field of
two strbufs, which were subject to change.
A contrived test case shows the problem where a file with a long enough
name to force the strbuf to grow is up-to-date (hence the code path is
used where the work tree's version of the file is reused), and then a
file that is not up-to-date needs to be written (hence the code path is
used where checkout_entry() uses the previously recorded base_dir that
is invalid by now).
Let's just copy the base_dir strings for use with checkout_entry(),
never touch them until the end, and release them then. This is an easily
verifiable fix (as opposed to the next-obvious alternative: to re-set
base_dir after every loop iteration).
This fixes https://github.com/git-for-windows/git/issues/1124
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-diff understands "--ours", "--theirs" and "--base" for files with
conflicts. But so far they were not documented for the central diff
command but only for diff-files.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The instructions how to normalize the line endings should have been updated
as part of commit 6523728499 'convert: unify the "auto" handling of CRLF',
(but that part never made it into the commit).
Update the documentation in Documentation/gitattributes.txt and add
a test case in t0025.
Reported by Kristian Adrup
https://github.com/git-for-windows/git/issues/954
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, the whole http.proxy option string was passed to curl without
any preprocessing so curl could complain about the invalid proxy
configuration.
After the commit 372370f167 ("http: use credential API to handle proxy
authentication", 2016-01-26), if the user specified an invalid HTTP
proxy option in the configuration, then the option parsing silently
fails and NULL will be passed to curl as a proxy. This forces curl to
fall back to detecting the proxy configuration from the environment,
causing the http.proxy option ignoring.
Fix this issue by checking the proxy option parsing result. If parsing
failed then print an error message and die. Such behaviour allows the
user to quickly figure the proxy misconfiguration and correct it.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Curl distinguishes between an empty proxy address and a NULL proxy
address. In the first case it completely disables proxy usage, but if
the proxy address option is NULL then curl attempts to determine the
proxy address from the http_proxy environment variable.
According to the documentation, if the http.proxy option is set to an
empty string, git should bypass proxy and connect to the server
directly:
export http_proxy=http://network-proxy/
cd ~/foobar-project
git config remote.origin.proxy ""
git fetch
Previously, proxy host was configured by one line:
curl_easy_setopt(result, CURLOPT_PROXY, curl_http_proxy);
Commit 372370f167 ("http: use credential API to handle proxy
authentication", 2016-01-26) parses the proxy option, then extracts the
proxy host address and updates the curl configuration, making the
previous call a noop:
credential_from_url(&proxy_auth, curl_http_proxy);
curl_easy_setopt(result, CURLOPT_PROXY, proxy_auth.host);
But if the proxy option is empty then the proxy host field becomes NULL.
This forces curl to fall back to detecting the proxy configuration from
the environment, causing the http.proxy option to not work anymore.
Fix this issue by explicitly handling http.proxy being set the empty
string. This also makes the code a bit more clear and should help us
avoid such regressions in the future.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The lazy-init codepath will not be exercised uniless threaded. Skip
the entire test on a single-core box. Also replace a hard-coded
constant of 2000 (number of cache entries to manifacture for tests)
with a variable with a human readable name.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Created helper executable to print the value of online_cpus()
allowing multi-threaded tests to be skipped when appropriate.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An empty line should stop any pending in-body headers, and start the
actual body parsing.
This also modifies the original test for the in-body headers to actually
have a real commit body that starts with spaces, and changes the test to
check that the long line matches _exactly_, and doesn't get extra data
from the body.
Fixes:6b4b013f1884 ("mailinfo: handle in-body header continuations")
Cc: Jonathan Tan <jonathantanmy@google.com>
Cc: Jeff King <peff@peff.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "push --recurse-submodules" to propagate, if given a name as remote, the
provided remote and refspec recursively to the pushes performed in the
submodules. The push will therefore only succeed if all submodules have a
remote with such a name configured.
Note that "push --recurse-submodules" with a path or URL as remote will not
propagate the remote or refspec and instead use the default remote and refspec
configured in the submodule, preserving the current behavior.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the 'push-check' subcommand to submodule--helper which is used to
check if the provided remote and refspec can be used as part of a push
operation in the submodule.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future patch needs access to the 'parse_push_refspec()' function so
let's export the function so other modules can use it.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach push --recurse-submodules to propagate push-options recursively to
the pushes performed in the submodules.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define a new task in .travis.yml that triggers a test session on
Windows run elsewhere.
* ls/travis-relays-for-windows-ci:
travis-ci: build and test Git on Windows
The default behaviour of "git log" in an interactive session has
been changed to enable "--decorate".
* ah/log-decorate-default-to-auto:
log: if --decorate is not given, default to --decorate=auto
"git tag/branch/for-each-ref" family of commands long allowed to
filter the refs by "--contains X" (show only the refs that are
descendants of X), "--merged X" (show only the refs that are
ancestors of X), "--no-merged X" (show only the refs that are not
ancestors of X). One curious omission, "--no-contains X" (show
only the refs that are not descendants of X) has been added to
them.
* ab/ref-filter-no-contains:
tag: add tests for --with and --without
ref-filter: reflow recently changed branch/tag/for-each-ref docs
ref-filter: add --no-contains option to tag/branch/for-each-ref
tag: change --point-at to default to HEAD
tag: implicitly supply --list given another list-like option
tag: change misleading --list <pattern> documentation
parse-options: add OPT_NONEG to the "contains" option
tag: add more incompatibles mode tests
for-each-ref: partly change <object> to <commit> in help
tag tests: fix a typo in a test description
tag: remove a TODO item from the test suite
ref-filter: add test for --contains on a non-commit
ref-filter: make combining --merged & --no-merged an error
tag doc: reword --[no-]merged to talk about commits, not tips
tag doc: split up the --[no-]merged documentation
tag doc: move the description of --[no-]merged earlier
David reported:
> When I try to run `git diff --submodule=diff` in a submodule which has
> it's own submodules that have changes I get the error: fatal: bad
> object.
This happens, because we do not properly initialize the environment
in which the diff is run in the submodule. That means we inherit the
environment from the main process, which sets environment variables.
(Apparently we do set environment variables which we do not set
when not in a submodules, i.e. the .git directory is linked)
This commit, just like fd47ae6a5b (diff: teach diff to display
submodule difference with an inline diff, 2016-08-31) introduces bad
test code (i.e. hard coded hash values), which will be cleanup up in
a later patch.
Reported-by: David Parrish <daveparrish@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There isn't any obvious reason for the 'struct string_list push_options'
and 'struct string_list_item *item' to be marked as static, so unmark
them as being static. Also, clear the push_options string_list to
prevent memory leaking.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
List the fields in order of appearance in the command output.
Signed-off-by: Mostyn Bramley-Moore <mostyn@antipode.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we notice that we have a local copy of an incoming
object, we compare the two objects to make sure we haven't
found a collision. Before we get to the actual object
bytes, though, we compare the type and size from
sha1_object_info().
If our local object is corrupted, then the type will be
OBJ_BAD, which obviously will not match the incoming type,
and we'll report "SHA1 COLLISION FOUND" (with capital
letters and everything). This is confusing, as the problem
is not a collision but rather local corruption. We should
report that instead (just like we do if reading the rest of
the object content fails a few lines later).
Note that we _could_ just ignore the error and mark it as a
non-collision. That would let you "git fetch" to replace a
corrupted object. But it's not a very reliable method for
repairing a repository. The earlier want/have negotiation
tries to get the other side to omit objects we already have,
and it would not realize that we are "missing" this
corrupted object. So we're better off complaining loudly
when we see corruption, and letting the user take more
drastic measures to repair (like making a full clone
elsewhere and copying the pack into place).
Note that the test sets transfer.unpackLimit in the
receiving repository so that we use index-pack (which is
what does the collision check). Normally for such a small
push we'd use unpack-objects, which would simply try to
write the loose object, and discard the new one when we see
that there's already an old one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When sha1_loose_object_info() finds that a loose object file
cannot be stat(2)ed or mmap(2)ed, it returns -1 to signal an
error to the caller. However, if it found that the loose
object file is corrupt and the object data cannot be used
from it, it stuffs OBJ_BAD into "type" field of the
object_info, but returns zero (i.e., success), which can
confuse callers.
This is due to 052fe5eac (sha1_loose_object_info: make type
lookup optional, 2013-07-12), which switched the return to a
strict success/error, rather than returning the type (but
botched the return).
Callers of regular sha1_object_info() don't notice the
difference, as that function returns the type (which is
OBJ_BAD in this case). However, direct callers of
sha1_object_info_extended() see the function return success,
but without setting any meaningful values in the object_info
struct, leading them to access potentially uninitialized
memory.
The easiest way to see the bug is via "cat-file -s", which
will happily ignore the corruption and report whatever
value happened to be in the "size" variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like we did in 0d1d6e50 ("t/t7003: replace \t with literal tab
in sed expression", 2010-08-12), avoid writing "\t" for HT in sed
scripts, which is not portable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add check for the end of the entries for the thread partition.
Add test for lazy init name hash with specific directory structure
The lazy init hash name was causing a buffer overflow when the last
entry in the index was multiple folder deep with parent folders that
did not have any files in them.
This adds a test for the boundary condition of the thread partitions
with the folder structure that was triggering the buffer overflow.
The fix was to check if it is the last entry for the thread partition
in the handle_range_dir and not try to use the next entry in the cache.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 068c77a5 ("builtin/send-pack.c: use parse_options API",
2015-08-19), there is no external user of this helper function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the structure and functions have changed names, update the code
examples and the documentation. Rename the file to match the new name
of the API.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this structure handles an array of object IDs, rename it to struct
oid_array. Also rename the accessor functions and the initialization
constant.
This commit was produced mechanically by providing non-Documentation
files to the following Perl one-liners:
perl -pi -E 's/struct sha1_array/struct oid_array/g'
perl -pi -E 's/\bsha1_array_/oid_array_/g'
perl -pi -E 's/SHA1_ARRAY_INIT/OID_ARRAY_INIT/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sha1_array_for_each_unique take a callback using struct object_id.
Since one of these callbacks is an argument to for_each_abbrev, convert
those as well. Rename various functions, replacing "sha1" with "oid".
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert this function by changing the declaration and definition and
applying the following semantic patch to update the callers:
@@
expression E1, E2;
@@
- sha1_array_lookup(E1, E2.hash)
+ sha1_array_lookup(E1, &E2)
@@
expression E1, E2;
@@
- sha1_array_lookup(E1, E2->hash)
+ sha1_array_lookup(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a very small number of callers which don't already use struct
object_id. Convert them.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the callers to pass struct object_id by changing the function
declaration and definition and applying the following semantic patch:
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2.hash)
+ sha1_array_append(E1, &E2)
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2->hash)
+ sha1_array_append(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our struct child_process already has its own argv_array.
Let's use that to avoid having to format options into
separate buffers.
Note that we'll need to declare the child process outside of
the run_service_command() helper to do this. But that opens
up a further simplification, which is that the helper can
append to our argument list, saving each caller from
specifying "." manually.
Signed-off-by: Jeff King <peff@peff.net>
We probe the "17/" loose object directory for auto-gc, and
use a local buffer to format the path. We can just use
git_path() for this. It handles paths of any length
(reducing our error handling). And because we feed the
result straight to a system call, we can just use the static
variant.
Note that git_path also knows the string "objects/" is
special, and will replace it with git_object_directory()
when necessary.
Another alternative would be to use sha1_file_name() for the
pretend object "170000...", but that ends up being more
hassle for no gain, as we have to truncate the final path
component.
Signed-off-by: Jeff King <peff@peff.net>
We can use xsnprintf to do our truncation check with less
code. The error message isn't as specific, but the point is
that this isn't supposed to trigger in the first place
(because our buffer is big enough to handle any int).
Signed-off-by: Jeff King <peff@peff.net>
These calls to snprintf should always succeed, because their
input is small and fixed. Let's use xsnprintf to make sure
this is the case (and to make auditing for actual truncation
easier).
These could be candidates for turning into heap buffers, but
they fall into a few broad categories that make it not worth
doing:
- formatting single numbers is simple enough that we can
see the result should fit
- the size of a sha1 is likewise well-known, and I didn't
want to cause unnecessary conflicts with the ongoing
process to convert these constants to GIT_MAX_HEXSZ
- the interface for curl_errorstr is dictated by curl
Signed-off-by: Jeff King <peff@peff.net>
We'd prefer to avoid unchecked snprintf calls because
truncation can lead to unexpected results.
These are all cases where truncation shouldn't ever happen,
because the input to snprintf is fixed in size. That makes
them candidates for xsnprintf(), but it's simpler still to
just use the heap, and then nobody has to wonder if "100" is
big enough.
We'll use xstrfmt() where possible, and a strbuf when we need
the resulting size or to reuse the same buffer in a loop.
Signed-off-by: Jeff King <peff@peff.net>
After receive-pack reads the pack header from the client, it
feeds the already-read part to index-pack and unpack-objects
via their --pack-header command-line options. To do so, we
format it into a fixed buffer, then duplicate it into the
child's argv_array.
Our buffer is long enough to handle any possible input, so
this isn't wrong. But it's more complicated than it needs to
be; we can just argv_array_pushf() the final value and avoid
the intermediate copy. This drops the magic number and is
more efficient, too.
Note that we need to push to the argv_array in order, which
means we can't do the push until we are in the "unpack-objects
versus index-pack" conditional. Rather than duplicate the
slightly complicated format specifier, I pushed it into a
helper function.
Signed-off-by: Jeff King <peff@peff.net>
When name-rev needs to format an actual name, we do so into
a fixed-size buffer. That includes the actual ref tip, as
well as any traversal information. Since refs can exceed
1024 bytes, this means you can get a bogus result. E.g.,
doing:
git tag $(perl -e 'print join("/", 1..1024)')
git describe --contains HEAD^
results in ".../282/283", when it should be
".../1023/1024~1".
We can solve this by using a heap buffer. We'll use a
strbuf, which lets us write into the same buffer from our
loop without having to reallocate.
Signed-off-by: Jeff King <peff@peff.net>
We generate a reflog message that contains some fixed text
plus a branch name, and use a buffer of size PATH_MAX + 20.
This mostly works if you assume that refnames are shorter
than PATH_MAX, but:
1. That's not necessarily true. PATH_MAX is not always the
filesystem's limit.
2. The "20" is not sufficiently large for the fixed text
anyway.
Let's just switch to a heap buffer so we don't have to even
care.
Signed-off-by: Jeff King <peff@peff.net>
In create_branch() we write the reflog msg into a buffer in
the main function, but then use it only inside a
conditional. If you carefully follow the logic, you can
confirm that we never use the buffer uninitialized nor write
when it would not be used. But we can make this a lot more
obvious by simply moving the write step inside the
conditional.
Signed-off-by: Jeff King <peff@peff.net>
Like the previous commit, we'd like to avoid the assumption
that refs fit into PATH_MAX-sized buffers. These callsites
have an extra twist, though: they write the refnames using
mksnpath. This does two things beyond a regular snprintf:
1. It quietly writes "/bad-path/" when truncation occurs.
This saves the caller having to check the error code,
but if you aren't actually feeding the result to a
system call (and we aren't here), it's questionable.
2. It calls cleanup_path(), which removes leading
instances of "./". That's questionable when dealing
with refnames, as we could silently canonicalize a
syntactically bogus refname into a valid one.
Let's convert each case to use a strbuf. This is preferable
to xstrfmt() because we can reuse the same buffer as we
loop.
Signed-off-by: Jeff King <peff@peff.net>
Many functions which handle refs use a PATH_MAX-sized buffer
to do so. This is mostly reasonable as we have to write
loose refs into the filesystem, and at least on Linux the 4K
PATH_MAX is big enough that nobody would care. But:
1. The static PATH_MAX is not always the filesystem limit.
2. On other platforms, PATH_MAX may be much smaller.
3. As we move to alternate ref storage, we won't be bound
by filesystem limits.
Let's convert these to heap buffers so we don't have to
worry about truncation or size limits.
We may want to eventually constrain ref lengths for sanity
and to prevent malicious names, but we should do so
consistently across all platforms, and in a central place
(like the ref code).
Signed-off-by: Jeff King <peff@peff.net>
Part of the reflog content comes from the environment, which
can be much larger than our fixed buffer. Let's use a heap
buffer so we avoid truncating it.
Signed-off-by: Jeff King <peff@peff.net>
We format the tag header into a fixed 1024-byte buffer. But
since the tag-name and tagger ident can be arbitrarily
large, we may unceremoniously die with "tag header too big".
Let's just use a strbuf instead.
Note that it looks at first glance like we can just format
this directly into the "buf" strbuf where it will ultimately
go. But that buffer may already contain the tag message, and
we have no easy way to prepend formatted data to a strbuf
(we can only splice in an already-generated buffer). This
isn't a performance-critical path, so going through an extra
buffer isn't a big deal.
Signed-off-by: Jeff King <peff@peff.net>
To generate a patch id, we format the diff header into a
fixed-size buffer, and then feed the result to our sha1
computation. The fixed buffer has size '4*PATH_MAX + 20',
which in theory accommodates the four filenames plus some
extra data. Except:
1. The filenames may not be constrained to PATH_MAX. The
static value may not be a real limit on the current
filesystem. Moreover, we may compute patch-ids for
names stored only in git, without touching the current
filesystem at all.
2. The 20 bytes is not nearly enough to cover the
extra content we put in the buffer.
As a result, the data we feed to the sha1 computation may be
truncated, and it's possible that a commit with a very long
filename could erroneously collide in the patch-id space
with another commit. For instance, if one commit modified
"really-long-filename/foo" and another modified "bar" in the
same directory.
In practice this is unlikely. Because the filenames are
repeated, and because there's a single cutoff at the end of
the buffer, the offending filename would have to be on the
order of four times larger than PATH_MAX.
We could fix this by moving to a strbuf. However, we can
observe that the purpose of formatting this in the first
place is to feed it to git_SHA1_Update(). So instead, let's
just feed each part of the formatted string directly. This
actually ends up more readable, and we can even factor out
some duplicated bits from the various conditional branches.
Technically this may change the output of patch-id for very
long filenames, but it's not worth making an exception for
this in the --stable output. It was a bug, and one that only
affected an unlikely set of paths. And anyway, the exact
value would have varied from platform to platform depending
on the value of PATH_MAX, so there is no "stable" value.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git receive-pack" could have been forced to die by attempting
allocate an unreasonably large amount of memory with a crafted push
certificate; this has been fixed.
* bc/push-cert-receive-fix:
builtin/receive-pack: fix incorrect pointer arithmetic
Removing an entry from a notes tree and then looking another note
entry from the resulting tree using the internal notes API
functions did not work as expected. No in-tree users of the API
has such access pattern, but it still is worth fixing.
* mh/notes-tree-consolidate-fix:
notes: do not break note_tree structure in note_tree_consolidate()
A recent update to "rebase -i" stopped running hooks for the "git
commit" command during "reword" action, which has been fixed.
* js/rebase-i-reword-to-run-hooks:
sequencer: allow the commit-msg hooks to run during a `reword`
sequencer: make commit options more extensible
t7504: document regression: reword no longer calls commit-msg
Some debugging output from "git describe" were marked for l10n,
but some weren't. Mark missing ones for l10n.
* mg/describe-debug-l10n:
l10n: de: translate describe debug terms
describe: localize debug output fully
On many keyboards, typing "@{" involves holding down SHIFT key and
one can easily end up with "@{Up..." when typing "@{upstream}". As
the upstream/push keywords do not appear anywhere else in the syntax,
we can safely accept them case insensitively without introducing
ambiguity or confusion to solve this.
* ab/case-insensitive-upstream-and-push-marker:
rev-parse: match @{upstream}, @{u} and @{push} case-insensitively
Doc update.
* ab/doc-submitting:
doc/SubmittingPatches: show how to get a CLI commit summary
doc/SubmittingPatches: clarify the casing convention for "area: change..."
Doc updates.
* ab/test-readme-updates:
t/README: clarify the test_have_prereq documentation
t/README: change "Inside <X> part" to "Inside the <X> part"
t/README: link to metacpan.org, not search.cpan.org
FreeBSD implementation of getcwd(3) behaved differently when an
intermediate directory is unreadable/unsearchable depending on the
length of the buffer provided, which our strbuf_getcwd() was not
aware of. strbuf_getcwd() has been taught to cope with it better.
* rs/freebsd-getcwd-workaround:
strbuf: support long paths w/o read rights in strbuf_getcwd() on FreeBSD
A few commands that recently learned the "--recurse-submodule"
option misbehaved when started from a subdirectory of the
superproject.
* bw/recurse-submodules-relative-fix:
ls-files: fix bug when recursing with relative pathspec
ls-files: fix typo in variable name
grep: fix bug when recursing with relative pathspec
setup: allow for prefix to be passed to git commands
grep: fix help text typo
Command line completion updates.
* sg/completion-ctags:
completion: offer ctags symbol names for 'git log -S', '-G' and '-L:'
completion: extract completing ctags symbol names into helper function
completion: put matching ctags symbol names directly into COMPREPLY
The refs completion for large number of refs has been sped up,
partly by giving up disambiguating ambiguous refs and partly by
eliminating most of the shell processing between 'git for-each-ref'
and 'ls-remote' and Bash's completion facility.
* sg/completion-refs-speedup:
completion: speed up branch and tag completion
completion: fill COMPREPLY directly when completing fetch refspecs
completion: fill COMPREPLY directly when completing refs
completion: let 'for-each-ref' sort remote branches for 'checkout' DWIMery
completion: let 'for-each-ref' filter remote branches for 'checkout' DWIMery
completion: let 'for-each-ref' strip the remote name from remote branches
completion: let 'for-each-ref' and 'ls-remote' filter matching refs
completion: don't disambiguate short refs
completion: don't disambiguate tags and branches
completion: support excluding full refs
completion: support completing fully qualified non-fast-forward refspecs
completion: support completing full refs after '--option=refs/<TAB>'
completion: wrap __git_refs() for better option parsing
completion: remove redundant __gitcomp_nl() options from _git_commit()
"what URL do we want to update this submodule?" and "are we
interested in this submodule?" are split into two distinct
concepts, and then the way used to express the latter got extended,
paving a way to make it easier to manage a project with many
submodules and make it possible to later extend use of multiple
worktrees for a project with submodules.
* bw/submodule-is-active:
submodule add: respect submodule.active and submodule.<name>.active
submodule--helper init: set submodule.<name>.active
clone: teach --recurse-submodules to optionally take a pathspec
submodule init: initialize active submodules
submodule: decouple url and submodule interest
submodule--helper clone: check for configured submodules using helper
submodule sync: use submodule--helper is-active
submodule sync: skip work for inactive submodules
submodule status: use submodule--helper is-active
submodule--helper: add is-active subcommand
This is the endgame of the topic to avoid blindly falling back to
".git" when the setup sequence said we are _not_ in Git repository.
A corner case that happens to work right now may be broken by a
call to die("BUG").
* jk/no-looking-at-dotgit-outside-repo-final:
setup_git_env: avoid blind fall-back to ".git"
Stop supporting "git merge <message> HEAD <commit>" syntax that has
been deprecated since October 2007, and issues a deprecation
warning message since v2.5.0.
* jc/merge-drop-old-syntax:
merge: drop 'git merge <message> HEAD <commit>' syntax
In order to checkout files, difftool reads "diff --raw"
output and feeds the names to checkout_entry(). That
function requires us to have a "struct cache_entry". And
because that struct uses a FLEX_ARRAY for the name field, we
have to actually copy in our new name.
The current code allocates a single re-usable cache_entry
that can hold a name up to PATH_MAX, and then copies
filenames into it using strcpy(). But there's no guarantee
that incoming names are smaller than PATH_MAX. They've come
from "diff --raw" output which might be diffing between two
trees (and hence we'd be subject to the PATH_MAX of some
other system, or even none at all if they were created
directly via "update-index").
We can fix this by using make_cache_entry() to create a
correctly-sized cache_entry for each name. This incurs an
extra allocation per file, but this is negligible compared
to actually writing out the file contents.
To make this simpler, we can push this procedure into a new
helper function. Note that we can also get rid of the "len"
variables for src_path and dst_path (and in fact we must, as
the compiler complains that they are unused).
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As xgetcwd() returns an allocated buffer, we should free this
buffer when we don't need it any more.
This was found by Coverity.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suppose I have a superproject 'super', with two submodules 'super/sub'
and 'super/sub1'. 'super/sub' itself contains a submodule
'super/sub/subsub'. Now suppose I run, from within 'super':
echo hi >sub/subsub/stray-file
echo hi >sub1/stray-file
Currently we get would see the following output in git-status:
git status --short
m sub
? sub1
With this patch applied, the untracked file in the nested submodule is
displayed as an untracked file on the 'super' level as well.
git status --short
? sub
? sub1
This doesn't change the output of 'git status --porcelain=1' for nested
submodules, because its output is always ' M' for either untracked files
or local modifications no matter the nesting level of the submodule.
'git status --porcelain=2' is affected by this change in a nested
submodule, though. Without this patch it would report the direct submodule
as modified and having no untracked files. With this patch it would report
untracked files. Chalk this up as a bug fix.
This bug fix also affects the default output (non-short, non-porcelain)
of git-status, which is not tested here.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the place holder in the error message is for multiple submodules,
we don't want to encapsulate the string place holder in single quotes.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If I add an untracked file to a submodule or modify a tracked file,
currently "git status --short" treats the change in the same way as
changes to the current HEAD of the submodule:
$ git clone --quiet --recurse-submodules https://gerrit.googlesource.com/gerrit
$ echo hello >gerrit/plugins/replication/stray-file
$ sed -i -e 's/.*//' gerrit/plugins/replication/.mailmap
$ git -C gerrit status --short
M plugins/replication
This is by analogy with ordinary files, where "M" represents a change
that has not been added yet to the index. But this change cannot be
added to the index without entering the submodule, "git add"-ing it,
and running "git commit", so the analogy is counterproductive.
Introduce new status letters " ?" and " m" for this. These are similar
to the existing "??" and " M" but mean that the submodule (not the
parent project) has new untracked files and modified files, respectively.
The user can use "git add" and "git commit" from within the submodule to
add them.
Changes to the submodule's HEAD commit can be recorded in the index with
a plain "git add -u" and are shown with " M", like today.
To avoid excessive clutter, show at most one of " ?", " m", and " M" for
the submodule. They represent increasing levels of change --- the last
one that applies is shown (e.g., " m" if there are both modified files
and untracked files in the submodule, or " M" if the submodule's HEAD
has been modified and it has untracked files).
While making these changes, we need to make sure to not break porcelain
level 1, which shares code with "status --short". We only change
"git status --short".
Non-short "git status" and "git status --porcelain=2" already handle
these cases by showing more detail:
$ git -C gerrit status --porcelain=2
1 .M S.MU 160000 160000 160000 305c864db28eb0c77c8499bc04c87de3f849cf3c 305c864db28eb0c77c8499bc04c87de3f849cf3c plugins/replication
$ git -C gerrit status
[...]
modified: plugins/replication (modified content, untracked content)
Scripts caring about these distinctions should use --porcelain=2.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git name-rev" assigned a phony "far in the future" date to tips of
refs that are not pointing at tag objects, and favored names based
on a ref with the oldest date. This made it almost impossible for
an unannotated tags and branches to be counted as a viable base,
which was especially problematic when the command is run with the
"--tags" option. If an unannotated tag that points at an ancient
commit and an annotated tag that points at a much newer commit
reaches the commit that is being named, the old unannotated tag was
ignored.
Update the "taggerdate" field of the rev-name structure, which is
initialized from the tip of ref, to have the committer date if the
object at the tip of ref is a commit, not a tag, so that we can
optionally take it into account when doing "is this name better?"
comparison logic.
When "name-rev" is run without the "--tags" option, the general
expectation is still to name the commit based on a tag if possible,
but use non-tag refs as fallback, and tiebreak among these non-tag
refs by favoring names with shorter hops from the tip. The use of a
phony "far in the future" date in the original code was an effective
way to ensure this expectation is held: a non-tag tip gets the same
"far in the future" timestamp, giving precedence to tags, and among
non-tag tips, names with shorter hops are preferred over longer
hops, without taking the "taggerdate" into account. As we are
taking over the "taggerdate" field to store the committer date for
tips with commits:
(1) keep the original logic when comparing names based on two refs
both of which are from refs/tags/;
(2) favoring a name based on a ref in refs/tags/ hierarchy over
a ref outside the hierarchy;
(3) between two names based on a ref both outside refs/tags/, give
precedence to a name with shorter hops and use "taggerdate"
only to tie-break.
A change to t4202 is a natural consequence. The test creates a
commit on a branch "side" and points at it with an unannotated tag
"refs/tags/side-2". The original code couldn't decide which one to
favor at all, and gave a name based on a branch (simply because
refs/heads/side sorts earlier than refs/tags/side-2). Because the
updated logic is taught to favor refs in refs/tags/ hierarchy, the
the test is updated to expect to see tags/side-2 instead.
[mjg: open-coded the comparisons in is_better_name(), dropping a
helper macro used in the original]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we encounter a new ref that could describe the commit we are
looking at, we compare the name that is formed using that ref and
the name we found so far and pick a better one.
Factor the comparison logic out to a separate helper function, while
keeping the current logic the same (i.e. a name that is based on an
older tag is better, and if two tags of the same age can reach the
commit, the one with fewer number of hops to reach the commit is
better).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the perl/perl.mak build process so that the file is regenerated
if the output of "perl -V" changes.
Before this change updating e.g. /usr/bin/perl to a new major version
would cause the next "make" command to fail, since perl.mak has
hardcoded paths to perl library paths retrieved from its first run.
Now the logic added in commit ee9be06770 ("perl: detect new files in
MakeMaker builds", 2012-07-27) is extended to regenerate
perl/perl.mak if there's any change to "perl -V".
This will in some cases redundantly trigger perl/perl.mak to be
re-made, e.g. if @INC is modified in ways the build process doesn't
care about through sitecustomize.pl, but the common case is that we
just do the right thing and re-generate perl/perl.mak when needed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "make coccicheck" target runs spatch against each source
file. But it does so in a for loop, so "make" never sees the
exit code of spatch. Worse, it redirects stderr to a log
file, so the user has no indication of any failure. And then
to top it all off, because we touched the patch file's
mtime, make will refuse to repeat the command because it
think the target is up-to-date.
So for example:
$ make coccicheck SPATCH=does-not-exist
SPATCH contrib/coccinelle/free.cocci
SPATCH contrib/coccinelle/qsort.cocci
SPATCH contrib/coccinelle/xstrdup_or_null.cocci
SPATCH contrib/coccinelle/swap.cocci
SPATCH contrib/coccinelle/strbuf.cocci
SPATCH contrib/coccinelle/object_id.cocci
SPATCH contrib/coccinelle/array.cocci
$ make coccicheck SPATCH=does-not-exist
make: Nothing to be done for 'coccicheck'.
With this patch, you get:
$ make coccicheck SPATCH=does-not-exist
SPATCH contrib/coccinelle/free.cocci
/bin/sh: 4: does-not-exist: not found
Makefile:2338: recipe for target 'contrib/coccinelle/free.cocci.patch' failed
make: *** [contrib/coccinelle/free.cocci.patch] Error 1
It also dumps the log on failure, so any errors from spatch
itself (like syntax errors in our .cocci files) will be seen
by the user.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since git_path_buf() is smart enough to replace "objects/"
with the correct object path, we can use it instead of
manually assembling the path. That's slightly shorter, and
will clean up any non-canonical bits in the path.
Signed-off-by: Jeff King <peff@peff.net>
The odb_mkstemp() function expects the caller to provide a
fixed buffer to write the resulting tempfile name into. But
it creates the template using snprintf without checking the
return value. This means we could silently truncate the
filename.
In practice, it's unlikely that the truncation would end in
the template-pattern that mkstemp needs to open the file. So
we'd probably end up failing either way, unless the path was
specially crafted.
The simplest fix would be to notice the truncation and die.
However, we can observe that most callers immediately
xstrdup() the result anyway. So instead, let's switch to
using a strbuf, which is easier for them (and isn't a big
deal for the other 2 callers, who can just strbuf_release
when they're done with it).
Note that many of the callers used static buffers, but this
was purely to avoid putting a large buffer on the stack. We
never passed the static buffers out of the function, so
there's no complicated memory handling we need to change.
Signed-off-by: Jeff King <peff@peff.net>
The odb_mkstemp function does not return an error; it dies
on failure instead. But many of its callers compare the
resulting descriptor against -1 and die themselves.
Mostly this is just pointless, but it does raise a question
when looking at the callers: if they show the results of the
"template" buffer after a failure, what's in it? The answer
is: it doesn't matter, because it cannot happen.
So let's make that clear by removing the bogus error checks.
In bitmap_writer_finish(), we can drop the error-handling
code entirely. In the other two cases, it's shared with the
open() in another code path; we can just move the
error-check next to that open() call.
And while we're at it, let's flesh out the function's
docstring a bit to make the error behavior clear.
Signed-off-by: Jeff King <peff@peff.net>
sha1dc/sha1.c wanted to check the endianness of the target platform
at compilation time and used a CPP macro with a rather overly
generic name, "BIGENDIAN", to pass the result of the check around
in the file. It wasn't prepared for the same macro set to 0
(false) by the platform to signal that the target is _not_ a big
endian box, and assumed that the endianness detection logic it has
alone would be the one that is setting the macro, resulting in a
breakage on Windows. This has been fixed by using a bit less
generic name for the same purpose.
* jk/sha1dc:
sha1dc: avoid CPP macro collisions
The name-hash used for detecting paths that are different only in
cases (which matter on case insensitive filesystems) has been
optimized to take advantage of multi-threading when it makes sense.
* jh/memihash-opt:
name-hash: add test-lazy-init-name-hash to .gitignore
name-hash: add perf test for lazy_init_name_hash
name-hash: add test-lazy-init-name-hash
name-hash: perf improvement for lazy_init_name_hash
hashmap: document memihash_cont, hashmap_disallow_rehash api
hashmap: add disallow_rehash setting
hashmap: allow memihash computation to be continued
name-hash: specify initial size for istate.dir_hash table
Code clean-up.
* jk/fast-import-cleanup:
pack.h: define largest possible encoded object size
encode_in_pack_object_header: respect output buffer length
fast-import: use xsnprintf for formatting headers
fast-import: use xsnprintf for writing sha1s
Recent enhancement to "git stash push" command to support pathspec
to allow only a subset of working tree changes to be stashed away
was found to be too chatty and exposed the internal implementation
detail (e.g. when it uses reset to match the index to HEAD before
doing other things, output from reset seeped out). These, and
other chattyness has been fixed.
* tg/stash-push-fixup:
stash: keep untracked files intact in stash -k
stash: pass the pathspec argument to git reset
stash: don't show internal implementation details
"git checkout" is taught the "--recurse-submodules" option.
* sb/checkout-recurse-submodules:
builtin/read-tree: add --recurse-submodules switch
builtin/checkout: add --recurse-submodules switch
entry.c: create submodules when interesting
unpack-trees: check if we can perform the operation for submodules
unpack-trees: pass old oid to verify_clean_submodule
update submodules: add submodule_move_head
submodule.c: get_super_prefix_or_empty
update submodules: move up prepare_submodule_repo_env
submodules: introduce check to see whether to touch a submodule
update submodules: add a config option to determine if submodules are updated
update submodules: add submodule config parsing
make is_submodule_populated gently
lib-submodule-update.sh: define tests for recursing into submodules
lib-submodule-update.sh: replace sha1 by hash
lib-submodule-update: teach test_submodule_content the -C <dir> flag
lib-submodule-update.sh: do not use ./. as submodule remote
lib-submodule-update.sh: reorder create_lib_submodule_repo
submodule--helper.c: remove duplicate code
connect_work_tree_and_git_dir: safely create leading directories
Most Git developers work on Linux and they have no way to know if their
changes would break the Git for Windows build. Let's fix that by adding
a job to TravisCI that builds and tests Git on Windows. Unfortunately,
TravisCI does not support Windows.
Therefore, we did the following:
* Johannes Schindelin set up a Visual Studio Team Services build
sponsored by Microsoft and made it accessible via an Azure Function
that speaks a super-simple API. We made TravisCI use this API to
trigger a build, wait until its completion, and print the build and
test results.
* A Windows build and test run takes up to 3h and TravisCI has a timeout
after 50min for Open Source projects. Since the TravisCI job does not
use heavy CPU/memory/etc. resources, the friendly TravisCI folks
extended the job timeout for git/git to 3h.
Things, that would need to be done:
* Someone with write access to https://travis-ci.org/git/git would need
to add the secret token as "GFW_CI_TOKEN" variable in the TravisCI
repository setting [1]. Afterwards the build should just work.
Things, that might need to be done:
* The Windows box can only process a single build at a time. A second
Windows build would need to wait until the first finishes. This
waiting time and the build time after the wait could exceed the 3h
threshold. If this is a problem, then it is likely to happen every day
as usually multiple branches are pushed at the same time (pu/next/
master/maint). I cannot test this as my TravisCI account has the 50min
timeout. One solution could be to limit the number of concurrent
TravisCI jobs [2].
[1] https://docs.travis-ci.com/user/environment-variables#Defining-Variables-in-Repository-Settings
[2] https://docs.travis-ci.com/user/customizing-the-build#Limiting-Concurrent-Builds
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the internal storage for struct sha1_array use an array of struct
object_id internally. Update the users of this struct which inspect its
internals.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert virtually all uses of unsigned char [20] to struct object_id.
Leave all the arguments that come from struct sha1_array, as these will
be converted in a later patch.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the callers of this function have been converted, so convert this
function and update the callers. This function also calls
sha1_array_append, which we'll convert shortly.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert this function pointer type and the functions that implement it
to take a struct object_id. Introduce a temporary in
show_ambiguous_object to avoid having to convert for_each_abbrev at this
point.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert struct disambiguate_state to use struct object_id by changing
the structure definition and applying the following semantic patch:
@@
struct disambiguate_state E1;
@@
- E1.bin_pfx
+ E1.bin_pfx.hash
@@
struct disambiguate_state *E1;
@@
- E1->bin_pfx
+ E1->bin_pfx.hash
@@
struct disambiguate_state E1;
@@
- E1.candidate
+ E1.candidate.hash
@@
struct disambiguate_state *E1;
@@
- E1->candidate
+ E1->candidate.hash
This conversion is needed so we can convert disambiguate_hint_fn later.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert a hardcoded constant buffer size to a use of GIT_MAX_HEXSZ, and
use parse_oid_hex to reduce the dependency on the size of the hash.
This function is a caller of sha1_array_append, which will be converted
later.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert some hardcoded constants into uses of parse_oid_hex.
Additionally, convert all uses of struct command, and miscellaneous
other functions necessary for that. This work is necessary to be able
to convert sha1_array_append later on.
To avoid needing to specify a constant, reject shallow lines with the
wrong length instead of simply ignoring them.
Note that in queue_command we are guaranteed to have a NUL-terminated
buffer or at least one byte of overflow that we can safely read, so the
linelen check can be elided. We would die in such a case, but not read
invalid memory.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we had already processed the last newline in a push certificate, we
would end up subtracting NULL from the end-of-certificate pointer when
computing the length of the line. This would have resulted in an
absurdly large length, and possibly a buffer overflow. Instead,
subtract the beginning-of-certificate pointer from the
end-of-certificate pointer, which is what's expected.
Note that this situation should never occur, since not only do we
require the certificate to be newline terminated, but the signature will
only be read from the beginning of a line. Nevertheless, it seems
prudent to correct it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After a note is removed, note_tree_consolidate is called to eliminate
some useless nodes. The typical case is that if you had an int_node
with 2 PTR_TYPE_NOTEs in it, and remove one of them, then the
PTR_TYPE_INTERNAL pointer in the parent tree can be replaced with the
remaining PTR_TYPE_NOTE.
This works fine when PTR_TYPE_NOTEs are involved, but falls flat when
other types are involved.
To put things in more practical terms, let's say we start from an empty
notes tree, and add 3 notes:
- one for a sha1 that starts with 424
- one for a sha1 that starts with 428
- one for a sha1 that starts with 4c
To keep track of this, note_tree.root will have a PTR_TYPE_INTERNAL at
a[4], pointing to an int_node*.
In turn, that int_node* will have a PTR_TYPE_NOTE at a[0xc], pointing to
the leaf_node* with the key and value, and a PTR_TYPE_INTERNAL at a[2],
pointing to another int_node*.
That other int_node* will have 2 PTR_TYPE_NOTE, one at a[4] and the
other at a[8].
When looking for the note for the sha1 starting with 428, get_note() will
recurse through (simplified) root.a[4].a[2].a[8].
Now, if we remove the note for the sha1 that starts with 4c, we're left
with a int_node* with only one PTR_TYPE_INTERNAL entry in it. After
note_tree_consolidate runs, root.a[4] now points to what used to be
pointed at by root.a[4].a[2].
Which means looking up for the note for the sha1 starting with 428 now
fails because there is nothing at root.a[4].a[2] anymore: there is only
root.a[4].a[4] and root.a[4].a[8], which don't match the expected
structure for the lookup.
So if all there is left in an int_node* is a PTR_TYPE_INTERNAL pointer,
we can't safely remove it. I think the same applies for PTR_TYPE_SUBTREE
pointers. IOW, only PTR_TYPE_NOTEs are safe to be moved to the parent
int_node*.
This doesn't have a practical effect on git because all that happens
after a remove_note is a write_notes_tree, which just iterates the entire
note tree, but this affects anything using libgit.a that would try to do
lookups after removing notes.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `reword` command used to call `git commit` in a manner that asks for
the prepare-commit-msg and commit-msg hooks to do their thing.
Converting that part of the interactive rebase to C code introduced the
regression where those hooks were no longer run.
Let's fix this.
Note: the flag is called `VERIFY_MSG` instead of the more intuitive
`RUN_COMMIT_MSG_HOOKS` to indicate that the flag suppresses the
`--no-verify` flag (which may do other things in the future in addition
to suppressing the commit message hooks, too).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far every time we need to tweak the behaviour of run_git_commit()
we have been adding a "int" parameter to it. As the function gains
parameters and different callsites having different needs, this is
becoming a maintenance burden. When a new knob needs to be added to
address a specific need for a single callsite, all the other callsites
need to add a "no, I do not want anything special with respect to the
new knob" argument.
Consolidate the existing four parameters into a flag word to make it
more maintainable, as we will be adding a new one to the mix soon.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git describe --debug localizes all debug messages but not the terms
head, lightweight, annotated that it outputs for the candidates.
Localize them, too.
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git describe --dirty" dies when it cannot be determined if the
state in the working tree matches that of HEAD (e.g. broken
repository or broken submodule). The command learned a new option
"git describe --broken" to give "$name-broken" (where $name is the
description of HEAD) in such a case.
* sb/describe-broken:
builtin/describe: introduce --broken flag
Recently we started passing the "--push-options" through the
external remote helper interface; now the "smart HTTP" remote
helper understands what to do with the passed information.
* sb/push-options-via-transport:
remote-curl: allow push options
send-pack: send push options correctly in stateless-rpc case
Code clean-up.
* km/t1400-modernization:
t1400: use test_when_finished for cleanup
t1400: remove a set of unused output files
t1400: use test_path_is_* helpers
t1400: set core.logAllRefUpdates in "logged by touch" tests
t1400: rename test descriptions to be unique
Code clean-up with minor bugfixes.
* jk/prefix-filename:
bundle: use prefix_filename with bundle path
prefix_filename: simplify windows #ifdef
prefix_filename: return newly allocated string
prefix_filename: drop length parameter
prefix_filename: move docstring to header file
hash-object: fix buffer reuse with --path in a subdirectory
A few unterminated here documents in tests were fixed, which in
turn revealed incorrect expectations the tests make. These tests
have been updated.
* st/verify-tag:
t7004, t7030: fix here-doc syntax errors
Change the revision parsing logic to match @{upstream}, @{u} & @{push}
case-insensitively.
Before this change supplying anything except the lower-case forms
emits an "unknown revision or path not in the working tree"
error. This change makes upper-case & mixed-case versions equivalent
to the lower-case versions.
The use-case for this is being able to hold the shift key down while
typing @{u} on certain keyboard layouts, which makes the sequence
easier to type, and reduces cases where git throws an error at the
user where it could do what he means instead.
These suffixes now join various other suffixes & special syntax
documented in gitrevisions(7) that matches case-insensitively. A table
showing the status of the various forms documented there before &
after this patch is shown below. The key for the table is:
- CI = Case Insensitive
- CIP = Case Insensitive Possible (without ambiguities)
- AG = Accepts Garbage (.e.g. @{./.4.minutes./.})
Before this change:
|----------------+-----+------+-----|
| What? | CI? | CIP? | AG? |
|----------------+-----+------+-----|
| @{<date>} | Y | Y | Y |
| @{upstream} | N | Y | N |
| @{push} | N | Y | N |
|----------------+-----+------+-----|
After it:
|----------------+-----+------+-----|
| What? | CI? | CIP? | AG? |
|----------------+-----+------+-----|
| @{<date>} | Y | Y | Y |
| @{upstream} | Y | Y | N |
| @{push} | Y | Y | N |
|----------------+-----+------+-----|
The ^{<type>} suffix is not made case-insensitive, because other
places that take <type> like "cat-file -t <type>" do want them case
sensitively (after all we never declared that type names are case
insensitive). Allowing case-insensitive typename only with this syntax
will make the resulting Git as a whole inconsistent.
This change was independently authored to scratch a longtime itch, but
when I was about to submit it I discovered that a similar patch had
been submitted unsuccessfully before by Conrad Irwin in August 2011 as
"rev-parse: Allow @{U} as a synonym for
@{u}" (<1313287071-7851-1-git-send-email-conrad.irwin@gmail.com>).
The tests for this patch are more exhaustive than in the 2011
submission. The starting point for them was to first change the code
to only support upper-case versions of the existing words, seeing what
broke, and amending the breaking tests to check upper case & mixed
case as appropriate, and where not redundant to other similar
tests. The implementation itself is equivalent.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
files-backend is now initialized with a $GIT_DIR. Converting a submodule
path to where real submodule gitdir is located is done in get_ref_store().
This gives a slight performance improvement for submodules since we
don't convert submodule path to gitdir at every backend call like
before. We pay that once at ref-store creation.
More cleanup in files_downcast() and files_assert_main_repository()
follows shortly. It's separate to keep noises from this patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
refs is learning to avoid path rewriting that is done by
strbuf_git_path_submodule(). Factor out this code so it could be reused
by refs_* functions.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_ref_store() will soon be renamed to get_submodule_ref_store().
Together with future get_worktree_ref_store(), the three functions
provide an appropriate ref store for different operation modes. New APIs
will be added to operate directly on ref stores.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the last function in this code (besides public API) that takes
submodule argument and handles both main/submodule cases. Break it down,
move main store registration in get_main_ref_store() and keep the rest
in register_submodule_ref_store().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps the future changes in this code. And because get_ref_store()
is destined to become get_submodule_ref_store(), the "get main store"
code path will be removed eventually. After this the patch to delete
that code will be cleaner.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With get_main_ref_store() being used inside get_ref_store(),
lookup_ref_store() is only used for submodule code path. Rename to
reflect that and delete dead code.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given $GIT_DIR and $GIT_COMMON_DIR, files-backend is now in charge of
deciding what goes where (*). The end goal is to pass $GIT_DIR only. A
refs "view" of a linked worktree is a logical ref store that combines
two files backends together.
(*) Not entirely true since strbuf_git_path_submodule() still does path
translation underneath. But that's for another patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep repo-related path handling in one place. This will make it easier
to add submodule/multiworktree support later.
This automatically adds the "if submodule then use the submodule version
of git_path" to other call sites too. But it does not mean those
operations are submodule-ready. Not yet.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep repo-related path handling in one place. This will make it easier
to add submodule/multiworktree support later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes reflog path building consistent, always in the form of
strbuf_git_path(sb, "logs/%s", refname);
It reduces the mental workload a bit in the next patch when that
function call is converted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_path() and friends are going to be killed in files-backend.c in near
future. And because there's a risk with overwriting buffer in
git_path(), let's convert them all to strbuf_git_path(). We'll have
easier time killing/converting strbuf_git_path() then because we won't
have to worry about memory management again.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a no-op patch. It prepares the function so that we can release
resources (to be added later in this function) before we return.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep repo-related path handling in one place. This will make it easier
to add submodule/multiworktree support later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
safe_create_dir() can do adjust_shared_perm() internally, and init-db
has always created 'refs' in shared mode since the beginning,
af6e277c5e (git-init-db: initialize shared repositories with --shared -
2005-12-22). So this code looks like extra adjust_shared_perm calls are
unnecessary.
And they are. But let's see why there are here in the first place.
This code was added in 6fb5acfd8f (refs: add methods to init refs db -
2016-09-04). From the diff alone this looks like a faithful refactored
code from init-db.c. But there is a subtle difference:
Between the safe_create_dir() block and adjust_shared_perm() block in
the old init-db.c, we may copy/recreate directories from the repo
template. So it makes sense that adjust_shared_perm() is re-executed
then to fix potential permission screwups.
After 6fb5acfd8f, refs dirs are created after template is copied. Nobody
will change directory permission again. So the extra adjust_shared_perm()
is redudant. Delete them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's not in the diff context, but files_downcast() is called before this
check. If "refs" is NULL, we would have segfaulted before reaching the
check here. And we should never see NULL refs in backend code (frontend
should have caught it).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Created in 5f3c3a4e6f (files_log_ref_write: new function - 2015-11-10)
but probably never used outside refs-internal.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By having a stricter check in the superproject we catch errors earlier,
instead of spawning a child process to tell us.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Migrate 'is_submodule_modified' to the new porcelain format of
git-status. This conversion attempts to convert faithfully, i.e.
the behavior ought to be exactly the same.
As the output in the parsing only distinguishes between untracked files
and the rest, this is easy to port to the new format, as we only
need to identify untracked files and the rest is handled in the "else"
case.
untracked files are indicated by only a single question mark instead of
two question marks, so the conversion is easy.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of implementing line reading yet again, make use of our beautiful
library function to read one line. By using strbuf_getwholeline instead
of strbuf_read, we avoid having to allocate memory for the entire child
process output at once. That is, we limit maximum memory usage.
Also we can start processing the output as it comes in, no need to
wait for all of it.
Once we know all information that we care about, we can terminate
the child early. In that case we do not care about its exit code as well.
By just closing our side of the pipe the child process will get a SIGPIPE
signal, which it will not report nor do we report it in finish_command,
ac78663b0d (run-command: don't warn on SIGPIPE deaths, 2015-12-29).
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we will likely be introducing a new hash function at some point,
and that hash function might be longer than 20 bytes, use the constant
GIT_MAX_RAWSZ, which is designed to be suitable for allocations, instead
of GIT_SHA1_RAWSZ. This will ease the transition down the line by
distinguishing between places where we need to allocate memory suitable
for the largest hash from those where we need to handle the current
hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we will likely be introducing a new hash function at some point,
and that hash function might be longer than 40 hex characters, use the
constant GIT_MAX_HEXSZ, which is designed to be suitable for
allocations, instead of GIT_SHA1_HEXSZ. This will ease the transition
down the line by distinguishing between places where we need to allocate
memory suitable for the largest hash from those where we need to handle
the current hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we will want to transition to a new hash at some point in the
future, and that hash may be larger in size than 160 bits, introduce two
constants that can be used for allocating a sufficient amount of memory.
They can be increased to reflect the largest supported hash size.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
FreeBSD implements getcwd(3) as a syscall, but falls back to a version
based on readdir(3) if it fails for some reason. The latter requires
permissions to read and execute path components, while the former does
not. That means that if our buffer is too small and we're missing
rights we could get EACCES, but we may succeed with a bigger buffer.
Keep retrying if getcwd(3) indicates lack of permissions until our
buffer can fit PATH_MAX bytes, as that's the maximum supported by the
syscall on FreeBSD anyway. This way we do what we can to be able to
benefit from the syscall, but we also won't loop forever if there is a
real permission issue.
This fixes a regression introduced with 7333ed17 (setup: convert
setup_git_directory_gently_1 et al. to strbuf, 2014-07-28) for paths
longer than 127 bytes with components that miss read or execute
permissions (e.g. 0711 on /home for privacy reasons); we used a fixed
PATH_MAX-sized buffer before.
Reported-by: Zenobiusz Kunegunda <zenobiusz.kunegunda@interia.pl>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend the section which describes how to get a commit summary to show
how do to that with "git show", currently the documentation only shows
how to do that with gitk.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify the test_have_prereq documentation so that it's clear in the
reader's mind when the text says "most common use of this directly"
what the answer to "as opposed to what?" is.
Usually this function isn't used in lieu of using the prerequisite
support built into test_expect_*, mention that explicitly.
This changes documentation that I added in commit
9a897893a7 ("t/README: Document the prereq functions, and 3-arg
test_*", 2010-07-02).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an early part of sha1dc/sha1.c, the code checks the endianness of
the target platform by inspecting common CPP macros defined on
big-endian boxes, and sets BIGENDIAN macro to 1. If these common
CPP macros are not defined, the code declares that the target
platform is little endian and does nothing (most notably, it does
not #undef its BIGENDIAN macro).
The code that does so even has this comment
Note that all MSFT platforms are little endian,
so none of these will be defined under the MSC compiler.
and later, the defined-ness of the BIGENDIAN macro is used to switch
the implementation of sha1_load() macro.
One thing the code did not anticipate is that somebody might define
BIGENDIAN macro in some header it includes to 0 on a little-endian
target platform. Because the auto-detection based on common macros
do not touch BIGENDIAN macro when it detects a little-endian target,
such a definition is still valid and then defined-ness test will say
"Ah, BIGENDIAN is defined" and takes the wrong sha1_load().
As this auto-detection logic pretends as if it owns the BIGENDIAN
macro by ignoring the setting that may come from the outside and by
not explicitly unsetting when it decides that it is working for a
little-endian target, solve this problem without breaking that
assumption. Namely, we can rename BIGENDIAN this code uses to
something much less generic, i.e. SHA1DC_BIGENDIAN. For extra
protection, undef the macro on a little-endian target.
It is possible to work it around by instead #undef BIGENDIAN in
the auto-detection code, but a macro (or include) that happens later
in the code can be implemented in terms of BIGENDIAN on Windows and
it is possible that the implementation gets upset when it sees the
CPP macro undef'ed (instead of set to 0). Renaming the private macro
intended to be used only in this file to a less generic name relieves
us from having to worry about that kind of breakage.
Noticed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "detect attempt to create collisions" variant of SHA-1
implementation by Marc Stevens (CWI) and Dan Shumow (Microsoft)
has been integrated and made the default.
* jk/sha1dc:
Makefile: make DC_SHA1 the default
t0013: add a basic sha1 collision detection test
Makefile: add DC_SHA1 knob
sha1dc: disable safe_hash feature
sha1dc: adjust header includes for git
sha1dc: add collision-detecting sha1 implementation
Teach the "debug" helper used in the test framework that allows a
command to run under "gdb" to make the session interactive.
* sg/test-with-stdin:
tests: make the 'test_pause' helper work in non-verbose mode
tests: create an interactive gdb session with the 'debug' helper
The default location "~/.git-credential-cache/socket" for the
socket used to communicate with the credential-cache daemon has
been moved to "~/.cache/git/credential/socket".
* dl/credential-cache-socket-in-xdg-cache:
credential-cache: add tests for XDG functionality
credential-cache: use XDG_CACHE_HOME for socket
path.c: add xdg_cache_home
Several callers use fixed buffers for storing the pack
object header, and they've picked 10 as a magic number. This
is reasonable, since it handles objects up to 2^67. But
let's give them a constant so it's clear that the number
isn't pulled out of thin air.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The encode_in_pack_object_header() writes a variable-length
header to an output buffer, but it doesn't actually know
long the buffer is. At first glance, this looks like it
might be possible to overflow.
In practice, this is probably impossible. The smallest
buffer we use is 10 bytes, which would hold the header for
an object up to 2^67 bytes. Obviously we're not likely to
see such an object, but we might worry that an object could
lie about its size (causing us to overflow before we realize
it does not actually have that many bytes). But the argument
is passed as a uintmax_t. Even on systems that have __int128
available, uintmax_t is typically restricted to 64-bit by
the ABI.
So it's unlikely that a system exists where this could be
exploited. Still, it's easy enough to use a normal out/len
pair and make sure we don't write too far. That protects the
hypothetical 128-bit system, makes it harder for callers to
accidentally specify a too-small buffer, and makes the
resulting code easier to audit.
Note that the one caller in fast-import tried to catch such
a case, but did so _after_ the call (at which point we'd
have already overflowed!). This check can now go away.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The stream_blob() function checks the return value of
snprintf and dies. This is more simply done with
xsnprintf (and matches the similar call in store_object).
The message the user would get is less specific, but since
the point is that this _shouldn't_ ever happen, that's OK.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have to write a sha1 with a newline, we do so by
copying both into a single buffer, so that we can issue a
single write() call.
We use snprintf but don't bother to check the output, since
we know it will fit. However, we should use xsnprintf() in
such a case so that we're notified if our assumption turns
out to be wrong (and to make it easier to audit for
unchecked snprintf calls).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test suite to test for these synonyms for --contains and
--no-contains, respectively.
Before this change there were no tests for them at all. This doesn't
exhaustively test for them as well as their --contains and
--no-contains synonyms, but at least it's something.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reflow the recently changed branch/tag-for-each-ref
documentation. This change shows no changes under --word-diff, except
the innocuous change of moving git-tag.txt's "[--sort=<key>]" around
slightly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the tag, branch & for-each-ref commands to have a --no-contains
option in addition to their longstanding --contains options.
This allows for finding the last-good rollout tag given a known-bad
<commit>. Given a hypothetically bad commit cf5c7253e0, the git
version to revert to can be found with this hacky two-liner:
(git tag -l 'v[0-9]*'; git tag -l --contains cf5c7253e0 'v[0-9]*') |
sort | uniq -c | grep -E '^ *1 ' | awk '{print $2}' | tail -n 10
With this new --no-contains option the same can be achieved with:
git tag -l --no-contains cf5c7253e0 'v[0-9]*' | sort | tail -n 10
As the filtering machinery is shared between the tag, branch &
for-each-ref commands, implement this for those commands too. A
practical use for this with "branch" is e.g. finding branches which
were branched off between v2.8.0 and v2.10.0:
git branch --contains v2.8.0 --no-contains v2.10.0
The "describe" command also has a --contains option, but its semantics
are unrelated to what tag/branch/for-each-ref use --contains for. A
--no-contains option for "describe" wouldn't make any sense, other
than being exactly equivalent to not supplying --contains at all,
which would be confusing at best.
Add a --without option to "tag" as an alias for --no-contains, for
consistency with --with and --contains. The --with option is
undocumented, and possibly the only user of it is
Junio (<xmqqefy71iej.fsf@gitster.mtv.corp.google.com>). But it's
trivial to support, so let's do that.
The additions to the the test suite are inverse copies of the
corresponding --contains tests. With this change --no-contains for
tag, branch & for-each-ref is just as well tested as the existing
--contains option.
In addition to those tests, add a test for "tag" which asserts that
--no-contains won't find tree/blob tags, which is slightly
unintuitive, but consistent with how --contains works & is documented.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the --points-at option to default to HEAD for consistency with
its siblings --contains, --merged etc. which default to
HEAD. Previously we'd get:
$ git tag --points-at 2>&1 | head -n 1
error: option `points-at' requires a value
This changes behavior added in commit ae7706b9ac (tag: add --points-at
list option, 2012-02-08).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "tag" command to implicitly turn on its --list mode when
provided with a list-like option such as --contains, --points-at etc.
This is for consistency with how "branch" works. When "branch" is
given a list-like option, such as --contains, it implicitly provides
--list. Before this change "tag" would error out on those sorts of
invocations. I.e. while both of these worked for "branch":
git branch --contains v2.8.0 <pattern>
git branch --list --contains v2.8.0 <pattern>
Only the latter form worked for "tag":
git tag --contains v2.8.0 '*rc*'
git tag --list --contains v2.8.0 '*rc*'
Now "tag", like "branch", will implicitly supply --list when a
list-like option is provided, and no other conflicting non-list
options (such as -d) are present on the command-line.
Spelunking through the history via:
git log --reverse -p -G'only allowed with' -- '*builtin*tag*c'
Reveals that there was no good reason for not allowing this in the
first place. The --contains option added in 32c35cfb1e ("git-tag: Add
--contains option", 2009-01-26) made this an error. All the other
subsequent list-like options that were added copied its pattern of
making this usage an error.
The only tests that break as a result of this change are tests that
were explicitly checking that this "branch-like" usage wasn't
permitted. Change those failing tests to check that this invocation
mode is permitted, add extra tests for the list-like options we
weren't testing, and tests to ensure that e.g. we don't toggle the
list mode in the presence of other conflicting non-list options.
With this change errors messages such as "--contains option is only
allowed with -l" don't make sense anymore, since options like
--contain turn on -l. Instead we error out when list-like options such
as --contain are used in conjunction with conflicting options such as
-d or -v.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the documentation for --list so that it's described as a
toggle, not as an option that takes a <pattern> as an argument.
Junio initially documented this in b867c7c23a ("git-tag: -l to list
tags (usability).", 2006-02-17), but later Jeff King changed "tag" to
accept multiple patterns in 588d0e834b ("tag: accept multiple patterns
for --list", 2011-06-20).
However, documenting this as "-l <pattern>" was never correct, as
these both worked before Jeff's change:
git tag -l 'v*'
git tag 'v*' -l
One would expect an option that was documented like that to only
accept:
git tag --list
git tag --list 'v*rc*'
And after Jeff's change, one that took multiple patterns:
git tag --list 'v*rc*' --list '*2.8*'
But since it's actually a toggle all of these work as well, and
produce identical output to the last example above:
git tag --list 'v*rc*' '*2.8*'
git tag --list 'v*rc*' '*2.8*' --list --list --list
git tag --list 'v*rc*' '*2.8*' --list -l --list -l --list
Now the documentation is more in tune with how the "branch" command
describes its --list option since commit cddd127b9a ("branch:
introduce --list option", 2011-08-28).
Change the test suite to assert that these invocations work for the
cases that weren't already being tested for.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the OPT_NONEG flag to the "contains" option and its hidden synonym
"with". Since this was added in commit 694a577519 ("git-branch
--contains=commit", 2007-11-07) giving --no-{contains,with} hasn't
been an error, but has emitted the help output since
filter.with_commit wouldn't get set.
Now git will emit "error: unknown option `no-{contains,with}'" at the
top of the help output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend the test suite to test for more invalid uses like "-l -a"
etc.
This change tests the code path in builtin/tag.c between lines:
if (argc == 0 && !cmdmode)
And:
if ((create_tag_object || force) && (cmdmode != 0))
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pager_in_use() function predates git_env_bool(), but
ends up doing the same thing. Let's make use of the latter,
which is shorter and less repetitive.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Created t/perf/p0004-lazy-init-name-hash.sh test
to demonstrate correctness and performance gains
with the multithreaded version of lazy_init_name_hash().
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add t/helper/test-lazy-init-name-hash.c test code
to demonstrate performance times for lazy_init_name_hash()
using the original single-threaded and the new multi-threaded
code paths.
Includes a --dump option to dump the created hashmaps to
stdout. You can use this to run both code paths and
confirm that they generate the same hashmaps.
Includes a --analyze option to analyze performance of both
code paths over a range of index sizes to help you find a
lower bound for the LAZY_THREAD_COST in name-hash.c.
For example, passing "-a 4000" will set "istate.cache_nr"
to 4000 and then try the multi-threaded code -- probably
giving 2 threads with 2000 entries each. It will then
run both the single-threaded (1x4000) and the multi-threaded
(2x2000) and compare the times. It will then repeat the
test with 8000, 12000, and etc. so that you can see the
cross over.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve performance of lazy_init_name_hash() when
ignore_case is set. Teach name-hash to build the
istate.name_hash and istate.dir_hash simultaneously
using a forward-diving technique on the pathname
of the index_entry, rather than adding name_hash
entries and then searching backwards in the pathname
for parent directories.
This borrows algorithm ideas from clear_ce_flags_{1,dir}.
Multiple threads are used with the new algorithm to
speed hashmap construction.
This new code path is only used when threads are present
(a compiler settings) and when the index is large enough
to warrant the pthread complexity.
The code in clear_ce_flags_dir() uses a linear search to
find the adjacent index entries with the same prefix; a
binary search is used here handle_range_dir() to further
speed things up.
The size of LAZY_THREAD_COST was determined from rough
analysis using:
t/helper/test-lazy-init-name-hash --analyze
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The paragraph begins with a sample command line `git branch <name>`
that has nothing to do with the option being described. Remove it,
but use the space to instead show that multiple patterns can be
given.
Also mention the unfortunate `-l` that can be easily confused with
it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change an example for `git branch <pattern>` to say `git branch
<branchname>` to be consistent with the synopsis. This changes
documentation added in d8d33736b5 ("branch: allow pattern arguments",
2011-08-28).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We found a few run-away here documents that are started with an
end-of-here-doc marker that is incorrectly spelled, e.g.
git some command >actual &&
cat <<EOF >expect
...
EOF &&
test_cmp expect actual
which ends up slurping the entire remainder of the script as if it
were the data. Often the command that gets misused like this exits
without failure (e.g. "cat" in the above example), which makes the
command appear to work, without ever executing the remainder of the
test.
Piggy-back on the test that catches &&-chain breakage to detect this
case as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like in the case of search patterns for 'git grep', see 29eec71f2
(completion: match ctags symbol names in grep patterns, 2011-10-21)),
a common thing to look for using 'git log -S', '-G' and '-L:' is the
name of a symbol.
Teach the completion for 'git log' to offer ctags symbol names after
these options, both in stuck and in unstuck forms.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit doubled the number of __git_match_ctag()'s
positional parameters, and, to keep the position of existing
parameters for the sake of backwards compatibility, the prefix,
current word and suffix parameters ended up in different order than in
other functions accepting the same parameters. Then there is a
condition checking the existence of the tag file before invoking this
function.
We could still live with this if there were only a single callsite,
but the next commit will add a few more, so it's worth providing a
cleaner interface.
Add the wrapper function __git_complete_symbol(), which encompasses
the condition for checking the presence of the tag file and filling
COMPREPLY, and accepts '--opt=val'-style options with default values
that keep callsites simpler.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The one-liner awk script in __git_match_ctag() listing ctags symbol
names for 'git grep <TAB>' is already smart enough to list only symbol
names matching the current word to be completed.
Extend this helper function to accept prefix and suffix parameters to
be prepended and appended, respectively, to each listed symbol name in
the awk script, so its output won't require any additional processing
or filtering in the completion script before being handed over to
Bash. Use the faster __gitcomp_direct() helper instead of
__gitcomp_nl() to fill the fully processed matching symbol names into
Bash's COMPREPLY array.
Right after 'git grep <TAB>' in current git.git with 14k+ symbol names
in the tag file, best of five:
Before:
$ time __gitcomp_nl "$(__git_match_ctag "" tags)"
real 0m0.178s
user 0m0.176s
sys 0m0.000s
After:
$ time __gitcomp_direct "$(__git_match_ctag "" tags "" " ")"
real 0m0.058s
user 0m0.048s
sys 0m0.008s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using rebase --interactive where one of the lines is marked as
'edit' this is the resulting output:
Stopped at ec3b9c4... stuffYou can amend the commit now, with
git commit --amend
Once you are satisfied with your changes, run
git rebase --continue
A newline character is missing at the end of the "Stopped at ..." line and
before the "You can amend ..." line. This patch fixes the malformed output by
adding the missing newline character to the end of the "Stopped at ..." line.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modify __git_heads() and __git_tags() and the few callsites they have,
so we can let 'git for-each-ref' do all the hard work and these
functions' output won't need any further processing or filtering
before being handed over to Bash, resulting in faster branch and tag
completion. These are some of the same tricks used in the previous
commits to speed up refs completion, namely:
- Extend both functions to accept prefix, current word and suffix
positional parameters, all optional and all empty by default to
keep the parameterless behavior unaltered.
- Specify appropriate globbing patterns to 'git for-each-ref' to
list only branches or tags matching the given current word
parameter.
- Modify the 'git for-each-ref --format=<...>' to include the given
prefix and suffix.
- Adjust all callsites to specify the proper prefix, current word
and suffix parameters, and to fill COMPREPLY using
__gitcomp_direct().
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __git_complete_fetch_refspecs() has to iterate over __git_refs()'s
output anyway to turn the listed matching refs into refspecs, and it
knows about the prefix and suffix that has to be added to each
refspec.
Modify this function to add the prefix and suffix to each refspec
while iterating and feed the result, since it doesn't need further
processing, to the new __gitcomp_direct() helper added in the previous
commit, because it should be faster when there are a lot of refspecs
to list.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__gitcomp_nl() iterates over all the possible completion words it gets
as argument
- filtering matching words,
- appending a trailing space to each matching word (in all but two
cases),
- prepending a prefix to each matching word (when completing words
after e.g. '--option=<TAB>' or 'master..<TAB>'), and
- adding each matching word to the COMPREPLY array.
This takes a while when a lot of refs are passed to __gitcomp_nl().
The previous changes in this series ensure that __git_refs() lists
only refs matching the current word to be completed, making a second
filtering in __gitcomp_nl() redundant.
Adding the necessary prefix and suffix could be done in __git_refs()
as well:
- When refs come from 'git for-each-ref', then that prefix and
suffix could be added much more efficiently using a 'git
for-each-ref' format containing said prefix and suffix. Care
should be taken, though, because that prefix might contain
'for-each-ref' format specifiers as part of the left hand side of
a '..' range or '...' symmetric difference notation or
fetch/push/etc. refspec, e.g. 'git log "evil-%(refname)..br<TAB>'.
Doubling every '%' in the prefix will prevent 'git for-each-ref'
from interpolating any of those contained specifiers.
- When refs come from 'git ls-remote', then that prefix and suffix
can be added in the shell loop that has to process 'git
ls-remote's output anyway.
- Finally, the prefix and suffix can be added to that handful of
potentially matching symbolic and pseudo refs right away in the
shell loop listing them.
And then all what is still left to do is to assign a bunch of
newline-separated words to a shell array, which can be done without a
shell loop iterating over each word, basically making all of
__gitcomp_nl() unnecessary for refs completion.
Add the helper function __gitcomp_direct() to fill the COMPREPLY array
with prefiltered and preprocessed words without any additional
processing, without a shell loop, with just one single compound
assignment. Modify __git_refs() to accept prefix and suffix
parameters and add them to each and every listed ref as described
above. Modify __git_complete_refs() to pass the prefix and suffix
parameters to __git_refs() and to feed __git_refs()'s output to
__gitcomp_direct() instead of __gitcomp_nl().
This speeds up refs completion when there are a lot of refs matching
the current word to be completed. Listing all branches for completion
in a repo with 100k local branches, all packed, best of five:
On Linux, near the beginning of this series, for reference:
$ time __git_complete_refs
real 0m2.028s
user 0m1.692s
sys 0m0.344s
Before this patch:
real 0m1.135s
user 0m1.112s
sys 0m0.024s
After:
real 0m0.367s
user 0m0.352s
sys 0m0.020s
On Windows, near the beginning:
real 0m13.078s
user 0m1.609s
sys 0m0.060s
Before this patch:
real 0m2.093s
user 0m1.641s
sys 0m0.060s
After:
real 0m0.683s
user 0m0.203s
sys 0m0.076s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When listing unique remote branches for 'git checkout's tracking
DWIMery, __git_refs() runs the classic '... |sort |uniq -u' pattern to
filter out duplicate remote branches.
Let 'git for-each-ref' do the sorting, sparing the overhead of
fork()+exec()ing 'sort' and a stage in the pipeline where potentially
relatively large amount of data can be passed between two subsequent
pipeline stages.
This speeds up refs completion for 'git checkout' a bit when a lot of
remote branches match the current word to be completed. Listing a
single local and 100k remote branches, all packed, best of five:
On Linux, before:
$ time __git_complete_refs --track
real 0m1.856s
user 0m1.816s
sys 0m0.060s
After:
real 0m1.550s
user 0m1.512s
sys 0m0.060s
On Windows, before:
real 0m3.128s
user 0m2.155s
sys 0m0.183s
After:
real 0m2.781s
user 0m1.826s
sys 0m0.136s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code listing unique remote branches for 'git checkout's tracking
DWIMery outputs only remote branches that match the current word to be
completed, but the filtering is done in a shell loop iterating over
all remote refs.
Let 'git for-each-ref' do the filtering, as it can do so much more
efficiently and we can remove that shell loop entirely.
This speeds up refs completion for 'git checkout' considerably when
there are a lot of non-matching remote refs to be filtered out.
Uniquely completing a branch in a repository with 100k remote
branches, all packed, best of five:
On Linux, before:
$ time __git_complete_refs --cur=maste --track
real 0m1.993s
user 0m1.740s
sys 0m0.304s
After:
real 0m0.266s
user 0m0.248s
sys 0m0.012s
On Windows, before:
real 0m6.187s
user 0m3.358s
sys 0m2.121s
After:
real 0m0.750s
user 0m0.015s
sys 0m0.090s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code listing unique remote branches for 'git checkout's tracking
DWIMery uses a shell parameter expansion in a loop iterating over each
listed ref to remove the remote's name from the remote branches, i.e.
the leading path component from the short ref. When listing refs from
a configured remote repository, '| sed s///' is used for the same
purpose.
Let 'git for-each-ref' strip one more leading path component from the
refs, i.e. use the format 'refname:strip=3' instead of '=2', making
that parameter expansion and 'sed' execution unnecessary.
This speeds up refs completion for 'git checkout'. Uniquely
completing a branch for 'git checkout maste<TAB>' in a repo with 100k
remote branches, all packed, best of five:
On Linux, near the beginning of this series, for reference:
$ time __git_complete_refs --cur=maste --track
real 0m8.185s
user 0m6.896s
sys 0m1.616s
Before this patch:
real 0m2.714s
user 0m2.344s
sys 0m0.436s
After:
real 0m1.993s
user 0m1.740s
sys 0m0.304s
On Windows, near the beginning:
real 1m8.421s
user 0m7.591s
sys 0m3.557s
Before this patch:
real 0m8.191s
user 0m4.638s
sys 0m2.918s
After:
real 0m6.187s
user 0m3.358s
sys 0m2.121s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When completing refs, several __git_refs() code paths list all the
refs from the refs/{heads,tags,remotes}/ hierarchy and then
__gitcomp_nl() iterates over those refs in a shell loop to filter out
refs not matching the current ref to be completed. This comes with a
considerable performance penalty when a repository contains a lot of
refs but the current ref can be uniquely completed or when only a
handful of refs match the current ref.
Reduce the number of iterations in __gitcomp_nl() from the number of
refs to the number of matching refs by specifying appropriate globbing
patterns to 'git for-each-ref' and 'git ls-remote' to list only those
refs that match the current ref to be completed. However, do so only
when the ref to match is explicitly given as parameter, because the
current word on the command line might contain a prefix like
'--option=' or 'branch..'. The __git_complete_refs() and
__git_complete_fetch_refspecs() helpers introduced previously in this
patch series already call __git_refs() specifying this current ref
parameter, so all their callsites, i.e. all places in the completion
script doing refs completion, can benefit from this optimization.
Furthermore, list only those symbolic and pseudo refs that match the
current ref to be completed. Though it doesn't matter at all in
itself performance-wise, it will allow us further significant
optimizations later in this series.
This speeds up refs completion considerably when there are a lot of
non-matching refs to be filtered out. Uniquely completing a branch in
a repository with 100k local branches, all packed, best of five:
On Linux, before:
$ time __git_complete_refs --cur=maste
real 0m0.831s
user 0m0.808s
sys 0m0.028s
After:
real 0m0.119s
user 0m0.104s
sys 0m0.008s
On Windows, before:
real 0m1.480s
user 0m1.031s
sys 0m0.060s
After:
real 0m0.377s
user 0m0.015s
sys 0m0.030s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the completion script lists short refs it does so using the 'git
for-each-ref' format 'refname:short', which makes sure that all listed
refs are unambiguous. While disambiguating refs is technically
correct in this case, as opposed to the cases discussed in the
previous patch, this disambiguation involves several stat() syscalls
for each ref, thus, unfortunately, comes at a steep cost especially on
Windows and/or when there are a lot of refs to be listed. A user of
Git for Windows reported[1] 'git checkout <TAB>' taking ~11 seconds in
a repository with just about 4000 refs.
However, it's questionable whether ambiguous refs are really that bad
to justify that much extra cost:
- Ambiguous refs are not that common,
- even if a repository contains ambiguous refs, they only hurt when
the user actually happens to want to do something with one of the
ambiguous refs, and
- the issue can be easily circumvented by renaming those ambiguous
refs.
- On the other hand, apparently not that many refs are needed to
make refs completion unacceptably slow on Windows,
- and this slowness bites each and every time the user attempts refs
completion, even when the repository doesn't contain any ambiguous
refs.
- Furthermore, circumventing the issue might not be possible or
might be considerably more difficult and requires various
trade-offs (e.g. working in a repository with only a few selected
important refs while keeping a separate repository with all refs
for reference).
Arguably, in this case the benefits of technical correctness are
rather minor compared to the price we pay for it, and we are better
off opting for performance over correctness.
Use the 'git for-each-ref' format 'refname:strip=2' to list short refs
to spare the substantial cost of disambiguating.
This speeds up refs completion considerably. Uniquely completing a
branch in a repository with 100k local branches, all packed, best of
five:
On Linux, before:
$ time __git_complete_refs --cur=maste
real 0m1.662s
user 0m1.368s
sys 0m0.296s
After:
real 0m0.831s
user 0m0.808s
sys 0m0.028s
On Windows, before:
real 0m12.457s
user 0m1.016s
sys 0m0.092s
After:
real 0m1.480s
user 0m1.031s
sys 0m0.060s
[1] - https://github.com/git-for-windows/git/issues/524
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the completion script has to list only tags or only branches, it
uses the 'git for-each-ref' format 'refname:short', which makes sure
that all listed tags and branches are unambiguous. However,
disambiguating tags and branches in these cases is wrong, because:
- __git_tags(), the helper function listing possible tagname
arguments for 'git tag', lists an ambiguous tag
'refs/tags/ambiguous' as 'tags/ambiguous'. Its only consumer,
'git tag' expects its tagname argument to be under 'refs/tags/',
thus it interprets that abgiguous tag as
'refs/tags/tags/ambiguous'. Clearly wrong.
- __git_heads() lists possible branchname arguments for 'git branch'
and possible 'branch.<branchname>' configuration subsections.
Both of these expect branchnames to be under 'refs/heads/' and
misinterpret a disambiguated branchname like 'heads/ambiguous'.
Furthermore, disambiguation involves several stat() syscalls for each
tag or branch, thus comes at a steep cost especially on Windows and/or
when there are a lot of tags or branches to be listed.
Use the 'git for-each-ref' format 'refname:strip=2' instead of
'refname:short' to avoid harmful disambiguation of tags and branches
in __git_tags() and __git_heads().
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 49416ad22 (completion: support excluding refs, 2016-08-24) made
possible to complete short refs with a '^' prefix.
Extend the support to full refs to make completing '^refs/...' work.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After 'git fetch <remote> <TAB>' our completion script offers refspecs
that will fetch to a local branch with the same name as in the remote
repository, e.g. 'master:master'. This also completes
non-fast-forward refspecs, i.e. after a '+' prefix like
'+master:master', and fully qualified refspecs, e.g.
'refs/heads/master:refs/heads/master'. However, it does not complete
non-fast-forward fully qualified refspecs (or fully qualified refspecs
following any other prefix, e.g. '--option=', though currently no git
command supports such an option, but third party git commands might).
These refspecs are listed by the __git_refs2() function, which is just
a thin wrapper iterating over __git_refs()'s output, turning each
listed ref into a refspec. Now, it's certainly possible to modify
__git_refs2() and its callsite to pass an extra parameter containing
only the ref part of the current word to be completed (to follow suit
of the previous commit) to deal with prefixed fully qualified refspecs
as well. Unfortunately, keeping the current behavior unchanged in the
"no extra parameter" case brings in a bit of subtlety, which makes the
resulting code ugly and compelled me to write a 8-line long comment in
the proof of concept. Not good. However, since the callsite has to
be modified for proper functioning anyway, we might as well leave
__git_refs2() as is and introduce a new helper function without
backwards compatibility concerns.
Add the new function __git_complete_fetch_refspecs() that has all the
necessary parameters to do the right thing in all cases mentioned
above, including non-fast-forward fully qualified refspecs. This new
function can also easier benefit from optimizations coming later in
this patch series.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Completing full refs currently only works when the full ref stands on
in its own on the command line, but doesn't work when the current word
to be completed contains a prefix before the full ref, e.g.
'--option=refs/<TAB>' or 'master..refs/bis<TAB>'.
The reason is that __git_refs() looks at the current word to be
completed ($cur) as a whole to decide whether it has to list full (if
it starts with 'refs/') or short refs (otherwise). However, $cur also
holds said '--option=' or 'master..' prefixes, which of course throw
off this decision. Luckily, the default action is to list short refs,
that's why completing short refs happens to work even after a
'master..<TAB>' prefix and similar cases.
Pass only the ref part of the current word to be completed to
__git_refs() as a new positional parameter, so it can make the right
decision even if the whole current word contains some kind of a
prefix.
Make this new parameter the 4. positional parameter and leave the 3.
as an ignored placeholder for now (it will be used later in this patch
series).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_refs() currently accepts two optional positional parameters: a
remote and a flag for 'git checkout's tracking DWIMery. To fix a
minor bug, and, more importantly, for faster refs completion, this
series will add three more parameters: a prefix, the current word to
be completed and a suffix, i.e. the options accepted by __gitcomp() &
friends, and will change __git_refs() to list only refs matching that
given current word and to add that given prefix and suffix to the
listed refs.
However, __git_refs() is the helper function that is most likely used
in users' custom completion scriptlets for their own git commands, and
we don't want to break those, so
- we can't change __git_refs()'s default output format, i.e. we
can't by default append a trailing space to every listed ref,
meaning that the suffix parameter containing the default trailing
space would have to be specified on every invocation, and
- we can't change the position of existing positional parameters
either, so there would have to be plenty of set-but-empty
placeholder positional parameters all over the completion script.
Furthermore, with five positional parameters it would be really hard
to remember which position means what.
To keep callsites simple, add the new wrapper function
__git_complete_refs() around __git_refs(), which:
- instead of positional parameters accepts real '--opt=val'-style
options and with minimalistic option parsing translates them to
__git_refs()'s and __gitcomp_nl()'s positional parameters, and
- includes the '__gitcomp_nl "$(__git_refs ...)" ...' command
substitution to make its behavior match its name and the behavior
of other __git_complete_* functions, and to limit future changes
in this series to __git_refs() and this new wrapper function.
Call this wrapper function instead of __git_refs() wherever possible
throughout the completion script, i.e. when __git_refs()'s output is
fed to __gitcomp_nl() right away without further processing, which
means all callsites except a single one in the __git_refs2() helper.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document memihash_cont() and hashmap_disallow_rehash()
in Documentation/technical/api-hashmap.txt.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change mentions of <object> to <commit> in the help output of
for-each-ref as appropriate.
Both --[no-]merged and --contains only take commits, but --points-at
can take any object, such as a tag pointing to a tree or blob.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change "suceed" to "succeed" in a test description. The typo has been
here since the code was originally added in commit ef5a6fb597 ("Add
test-script for git-tag", 2007-06-28).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test for "git tag -l" to not have an associated TODO
comment saying that it should return non-zero if there's no tags.
This was added in commit ef5a6fb597 ("Add test-script for git-tag",
2007-06-28) when the tests for "tag" were initially added, but at this
point changing this would be inconsistent with how "git tag" is a
synonym for "git tag -l", and would needlessly break external code
that relies on this porcelain command.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the tag test suite to test for --contains on a tree & blob. It
only accepts commits and will spew out "<object> is a tree, not a
commit".
It's sufficient to test this just for the "tag" and "branch" commands,
because it covers all the machinery shared between "branch" and
"for-each-ref".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach remote-curl to understand push options and to be able to convey
them across HTTP.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git send-pack --stateless-rpc" puts each request in a sequence of pkt-lines
followed by a flush-pkt. The push option code forgot about this and sends push
options and their terminating delimiter as ordinary pkt-lines that get their
length header stripped off by remote-curl before being sent to the server.
The result is multiple malformed requests, which the server rejects.
Fortunately send-pack --stateless-rpc already is aware of this "pkt-line within
pkt-line" framing for the update commands that precede push options. Handle
push options the same way.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the mention of "Inside the <script> part, the standard
output..." to use the definite article, which makes more sense in this
context.
This changes documentation I originally added back in commit
20873f45e7 ("t/README: Document the do's and don'ts of tests",
2010-07-02).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a link to the web version of the TAP::Parser::Grammar
documentation to link to metacpan.org instead of search.cpan.org.
This is something I added back in commit 20873f45e7 ("t/README:
Document the do's and don'ts of tests", 2010-07-02), at the time
search.cpan.org was the more actively maintained CPAN web-interface,
nowadays that's metacpan.org.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently when there are untracked changes in a file "one" and in a file
"two" in the repository and the user uses:
git stash push -k one
all changes in "two" are wiped out completely. That is clearly not the
intended result. Make sure that only the files given in the pathspec
are changed when git stash push -k <pathspec> is used.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For "git stash -p --no-keep-index", the pathspec argument is currently
not passed to "git reset". This means that changes that are staged but
that are excluded from the pathspec still get unstaged by git stash -p.
Make sure that doesn't happen by passing the pathspec argument to the
git reset in question, bringing the behaviour in line with "git stash --
<pathspec>".
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git stash push uses other git commands internally. Currently it only
passes the -q flag to those if the -q flag is passed to git stash. when
using 'git stash push -p -q --no-keep-index', it doesn't even pass the
flag on to the internal reset at all.
It really is enough for the user to know that the stash is created,
without bothering them with the internal details of what's happening.
Always pass the -q flag to the internal git clean and git reset
commands, to avoid unnecessary and potentially confusing output.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach hashmap to allow rehashes to be suppressed.
This is useful when hashmaps are accessed by multiple
threads. It still requires the caller to properly
manage their locking. This just prevents unexpected
rehashing during inserts and deletes.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add variant of memihash() to allow the hash computation to
be continued. There are times when we compute the hash on
a full path and then the hash on just the path to the parent
directory. This can be expensive on large repositories.
With this, we can hash the parent directory first. And then
continue the computation to include the "/filename".
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Specify an initial size for the istate.dir_hash HashMap matching
the size of the istate.name_hash.
Previously hashmap_init() was given 0, causing a 64 bucket
hashmap to be created. When working with very large
repositories, this would cause numerous rehash() calls to
realloc and rebalance the hashmap. This is especially true
when the worktree is deep, with many directories containing
a few files.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `reword` command of an interactive rebase used to call the
commit-msg hooks, but that regressed when we switched to the
rebase--helper backed by the sequencer.
Noticed by Sebastian Schuberth.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-describe tells you the version number you're at, or errors out, e.g.
when you run it outside of a repository, which may happen when downloading
a tar ball instead of using git to obtain the source code.
To keep this property of only erroring out, when not in a repository,
severe (submodule) errors must be downgraded to reporting them gently
instead of having git-describe error out completely.
To achieve that a flag '--broken' is introduced, which is in the same
vein as '--dirty' but uses an actual child process to check for dirtiness.
When that child dies unexpectedly, we'll append '-broken' instead of
'-dirty'.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent update to "rebase -i" started showing a message that is not
a warning with "warning:" prefix by mistake. This has been fixed.
* js/rebase-helper:
sequencer: drop "warning:" when stopping for edit
The configuration file learned a new "includeIf.<condition>.path"
that includes the contents of the given path only when the
condition holds. This allows you to say "include this work-related
bit only in the repositories under my ~/work/ directory".
* nd/conditional-config-include:
config: add conditional include
config.txt: reflow the second include.path paragraph
config.txt: clarify multiple key values in include.path
Code clean-up.
* jk/pack-name-cleanups:
index-pack: make pointer-alias fallbacks safer
replace snprintf with odb_pack_name()
odb_pack_keep(): stop generating keepfile name
sha1_file.c: make pack-name helper globally accessible
move odb_* declarations out of git-compat-util.h
Code to read submodule.<name>.ignore config did not state the
variable name correctly when giving an error message diagnosing
misconfiguration.
* sb/submodule-config-parse-ignore-fix:
submodule-config: correct error reporting for invalid ignore value
The command line prompt (in contrib/) learned a new 'tag' style
that can be specified with GIT_PS1_DESCRIBE_STYLE, to describe a
detached HEAD with "git describe --tags".
* mg/prompt-describe-tags:
git-prompt: add a describe style for any tags
Amend the section which describes how the first line of the subject
should look like to say that the ":" in "area: " shouldn't be treated
like a full stop for the purposes of letter casing.
Change the two subject examples to make this new paragraph clearer,
i.e. "unstar" is not a common word, and "git-cherry-pick.txt" is a
much longer string than "githooks.txt". Pick two recent commits from
git.git that fit better for the description.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the behavior of specifying --merged & --no-merged to be an
error, instead of silently picking the option that was provided last.
Subsequent changes of mine add a --no-contains option in addition to
the existing --contains. Providing both of those isn't an error, and
has actual meaning.
Making its cousins have different behavior in this regard would be
confusing to the user, especially since we'd be silently disregarding
some of their command-line input.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the wording for the --merged and --no-merged options to talk
about "commits" instead of "tips".
This phrasing was copied from the "branch" documentation in commit
5242860f54 ("tag.c: implement '--merged' and '--no-merged' options",
2015-09-10). Talking about the "tip" is branch nomenclature, not
something usually associated with tags.
This phrasing might lead the reader to believe that these options
might find tags pointing to trees or blobs, let's instead be explicit
and only talk about commits.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the --[no-]merged documentation into documentation that
documents each option independently. This is in line with how "branch"
and "for-each-ref" are documented, and makes subsequent changes to
discuss the limits & caveats of each option easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation for the --merged & --no-merged options earlier
in the documentation, to sit along the other switches, and right next
to the similar --contains and --points-at switches.
It makes more sense to group the options together, not have some
options after the like of <tagname>, <object>, <format> etc.
This was originally put there when the --merged & --no-merged options
were introduced in 5242860f54 ("tag.c: implement '--merged' and
'--no-merged' options", 2015-09-10). It's not apparent from that
commit that the documentation is being placed apart from other
options, rather than along with them, so this was likely missed in the
initial review.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We may take the path to a bundle file as an argument, and
need to adjust the filename based on the prefix we
discovered while setting up the git directory. We do so
manually into a fixed-size buffer, but using
prefix_filename() is the normal way.
Besides being more concise, there are two subtle
improvements:
1. The original inserted a "/" between the two paths, even
though the "prefix" argument always has the "/"
appended. That means that:
cd subdir && git bundle verify ../foo.bundle
was looking at (and reporting) subdir//../foo.bundle.
Harmless, but ugly. Using prefix_filename() gets this
right.
2. The original checked for an absolute path by looking
for a leading '/'. It should have been using
is_absolute_path(), which also covers more cases on
Windows (backslashes and dos drive prefixes).
But it's easier still to just pass the name to
prefix_filename(), which handles this case
automatically.
Note that we'll just leak the resulting buffer in the name
of simplicity, since it needs to last through the duration
of the program anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prefix_filename function used to do an early return when
there was no prefix on non-Windows platforms, but always
allocated on Windows so that it could call convert_slashes().
Now that the function always allocates, we can unify the
logic and make convert_slashes() the only conditional part.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prefix_filename() function returns a pointer to static
storage, which makes it easy to use dangerously. We already
fixed one buggy caller in hash-object recently, and the
calls in apply.c are suspicious (I didn't dig in enough to
confirm that there is a bug, but we call the function once
in apply_all_patches() and then again indirectly from
parse_chunk()).
Let's make it harder to get wrong by allocating the return
value. For simplicity, we'll do this even when the prefix is
empty (and we could just return the original file pointer).
That will cause us to allocate sometimes when we wouldn't
otherwise need to, but this function isn't called in
performance critical code-paths (and it already _might_
allocate on any given call, so a caller that cares about
performance is questionable anyway).
The downside is that the callers need to remember to free()
the result to avoid leaking. Most of them already used
xstrdup() on the result, so we know they are OK. The
remainder have been converted to use free() as appropriate.
I considered retaining a prefix_filename_unsafe() for cases
where we know the static lifetime is OK (and handling the
cleanup is awkward). This is only a handful of cases,
though, and it's not worth the mental energy in worrying
about whether the "unsafe" variant is OK to use in any
situation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function takes the prefix as a ptr/len pair, but in
every caller the length is exactly strlen(ptr). Let's
simplify the interface and just take the string. This saves
callers specifying it (and in some cases handling a NULL
prefix).
In a handful of cases we had the length already without
calling strlen, so this is technically slower. But it's not
likely to matter (after all, if the prefix is non-empty
we'll allocate and copy it into a buffer anyway).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a public function, so we should make its
documentation available near the declaration.
While we're at it, we can give a few details about how it
works.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hash-object command uses prefix_filename() without
duplicating its return value. Since that function returns a
static buffer, the value is overwritten by subsequent calls.
This can cause incorrect results when we use --path along
with hashing a file by its relative path, both of which need
to call prefix_filename(). We overwrite the filename
computed for --path, effectively ignoring it.
We can fix this by calling xstrdup on the return value. Note
that we don't bother freeing the "vpath" instance, as it
remains valid until the program exit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move cleanup lines that occur after test blocks into
test_when_finished calls within the test bodies. Don't move cleanup
lines that seem to be related to mutiple tests rather than a single
test.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test case redirects stdout and stderr to output files, but,
unlike the other cases of redirection in the t1400 tests, these files
are not examined downstream. Remove the redirection so that the
output is visible when running the tests verbosely.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A group of update-ref tests verifies that logs are created when either
the log file for the ref already exists or core.logAllRefUpdates is
"true". However, when the default for core.logAllRefUpdates was
changed in 0bee59186 (Enable reflogs by default in any repository with
a working directory., 2006-12-14), the setup for the tests was not
updated. As a result, the "logged by touch" tests would pass even if
the log file did not exist (i.e., if "--create-reflog" was removed
from the first "git update-ref" call).
Update the "logged by touch" tests to disable core.logAllRefUpdates
explicitly so that the behavior does not depend on the default value.
While we're here, update the "logged by config" tests to use
test_config() rather than setting core.logAllRefUpdates to "true"
outside of the tests.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few tests share their description with another test. Extend the
descriptions to indicate how the tests differ.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git difftool --dir-diff" used to die a controlled death giving a
"fatal" message when encountering a locally modified symbolic link,
but it started segfaulting since v2.12. This has been fixed.
* js/difftool-builtin:
difftool: handle modified symlinks in dir-diff mode
t7800: cleanup cruft left behind by tests
t7800: remove whitespace before redirect
Commit 0281e487fd ("grep: optionally recurse into submodules")
added functions grep_submodule() and grep_submodule_launch() which
use "struct work_item" which is defined only when thread support
is available.
The original implementation of grep_submodule() used the "struct
work_item" in order to gain access to a strbuf to store its output which
was to be printed at a later point in time. This differs from how both
grep_file() and grep_sha1() handle their output. This patch eliminates
the reliance on the "struct work_item" and instead opts to use the
output function stored in the output field of the "struct grep_opt"
object directly, making it behave similarly to both grep_file() and
grep_sha1().
Reported-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to adding submodule.<name>.url to the config, set
submodule.<name>.active to true unless submodule.active is configured
and the submodule's path matches the configured pathspec.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When initializing a submodule set the submodule.<name>.active config to
true if the module hasn't already been configured to be active by some
other means (e.g. a pathspec set in submodule.active).
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach clone --recurse-submodules to optionally take a pathspec argument
which describes which submodules should be recursively initialized and
cloned. If no pathspec is provided, --recurse-submodules will
recursively initialize and clone all submodules by using a default
pathspec of ".". In order to construct more complex pathspecs,
--recurse-submodules can be given multiple times.
This also configures the 'submodule.active' configuration option to be
the given pathspec, such that any future invocation of `git submodule
update` will keep up with the pathspec.
Additionally the switch '--recurse' is removed from the Documentation as
well as marked hidden in the options array, to streamline the options
for submodules. A simple '--recurse' doesn't convey what is being
recursed, e.g. it could mean directories or trees (c.f. ls-tree) In a
lot of other commands we already have '--recurse-submodules' to mean
recursing into submodules, so advertise this spelling here as the
genuine option.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach `submodule init` to initialize submodules which have been
configured to be active by setting 'submodule.active' with a pathspec.
Now if no path arguments are given and 'submodule.active' is configured,
`init` will initialize all submodules which have been configured to be
active. If no path arguments are given and 'submodule.active' is not
configured, then `init` will retain the old behavior of initializing all
submodules.
This allows users to record more complex patterns as it saves retyping
them whenever you invoke update.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the submodule.<name>.url config option is used to determine if
a given submodule is of interest to the user. This ends up being
cumbersome in a world where we want to have different submodules checked
out in different worktrees or a more generalized mechanism to select
which submodules are of interest.
In a future with worktree support for submodules, there will be multiple
working trees, each of which may only need a subset of the submodules
checked out. The URL (which is where the submodule repository can be
obtained) should not differ between different working trees.
It may also be convenient for users to more easily specify groups of
submodules they are interested in as opposed to running "git submodule
init <path>" on each submodule they want checked out in their working
tree.
To this end two config options are introduced, submodule.active and
submodule.<name>.active. The submodule.active config holds a pathspec
that specifies which submodules should exist in the working tree. The
submodule.<name>.active config is a boolean flag used to indicate if
that particular submodule should exist in the working tree.
Its important to note that submodule.active functions differently than
the other configuration options since it takes a pathspec. This allows
users to adopt at least two new workflows:
1. Submodules can be grouped with a leading directory, such that a
pathspec e.g. 'lib/' would cover all library-ish modules to allow
those who are interested in library-ish modules to set
"submodule.active = lib/" just once to say any and all modules in
'lib/' are interesting.
2. Once the pathspec-attribute feature is invented, users can label
submodules with attributes to group them, so that a broad pathspec
with attribute requirements, e.g. ':(attr:lib)', can be used to say
any and all modules with the 'lib' attribute are interesting.
Since the .gitattributes file, just like the .gitmodules file, is
tracked by the superproject, when a submodule moves in the
superproject tree, the project can adjust which path gets the
attribute in .gitattributes, just like it can adjust which path has
the submodule in .gitmodules.
Neither of these two additional configuration options solve the problem
of wanting different submodules checked out in different worktrees
because multiple worktrees share .git/config. Only once per-worktree
configurations become a reality can this be solved, but this is a
necessary preparatory step for that future.
Given these multiple ways to check if a submodule is of interest, the
more fine-grained submodule.<name>.active option has the highest order
of precedence followed by the pathspec check against submodule.active.
To ensure backwards compatibility, if neither of these options are set,
git falls back to checking the submodule.<name>.url option to determine
if a submodule is interesting.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git revert -m 0 $merge_commit" complained that reverting a merge
needs to say relative to which parent the reversion needs to
happen, as if "-m 0" weren't given. The correct diagnosis is that
"-m 0" does not refer to the first parent ("-m 1" does). This has
been fixed.
* jk/cherry-pick-0-mainline:
cherry-pick: detect bogus arguments to --mainline
The start-up sequence of "git" needs to figure out some configured
settings before it finds and set itself up in the location of the
repository and was quite messy due to its "chicken-and-egg" nature.
The code has been restructured.
* js/early-config:
setup.c: mention unresolved problems
t1309: document cases where we would want early config not to die()
setup_git_directory_gently_1(): avoid die()ing
t1309: test read_early_config()
read_early_config(): really discover .git/
read_early_config(): avoid .git/config hack when unneeded
setup: make read_early_config() reusable
setup: introduce the discover_git_directory() function
setup_git_directory_1(): avoid changing global state
setup: prepare setup_discovered_git_dir() for the root directory
setup_git_directory(): use is_dir_sep() helper
t7006: replace dubious test
Our source code has used the SHA1_HEADER cpp macro after "#include"
in the C code to switch among the SHA-1 implementations. Instead,
list the exact header file names and switch among implementations
using "#ifdef BLK_SHA1/#include "block-sha1/sha1.h"/.../#endif";
this helps some IDE tools.
* bc/sha1-header-selection-with-cpp-macros:
hash.h: move SHA-1 implementation selection into a header file
"git status --porcelain" is supposed to give a stable output, but a
few strings were left as translatable by mistake.
* mg/status-porcelain-no-i18n:
git-status: make porcelain more robust
"git add -p <pathspec>" unnecessarily expanded the pathspec to a
list of individual files that matches the pathspec by running "git
ls-files <pathspec>", before feeding it to "git diff-index" to see
which paths have changes, because historically the pathspec
language supported by "diff-index" was weaker. These days they are
equivalent and there is no reason to internally expand it. This
helps both performance and avoids command line argument limit on
some platforms.
* jk/add-i-use-pathspecs:
add--interactive: do not expand pathspecs with ls-files
"Dumb http" transport used to misparse a nonsense http-alternates
response, which has been fixed.
* jk/http-walker-buffer-underflow-fix:
http-walker: fix buffer underflow processing remote alternates
The pathspec mechanism learned to further limit the paths that
match the pattern to those that have specified attributes attached
via the gitattributes mechanism.
* bw/attr-pathspec:
pathspec: allow escaped query values
pathspec: allow querying for attributes
"git tag --contains" used to (ab)use the object bits to keep track
of the state of object reachability without clearing them after
use; this has been cleaned up and made to use the newer commit-slab
facility.
* jk/ref-filter-flags-cleanup:
ref-filter: use separate cache for contains_tag_algo
ref-filter: die on parse_commit errors
ref-filter: use contains_result enum consistently
ref-filter: move ref_cbdata definition into ref-filter.c
From a working tree of a repository, a new option of "rev-parse"
lets you ask if the repository is used as a submodule of another
project, and where the root level of the working tree of that
project (i.e. your superproject) is.
* sb/rev-parse-show-superproject-root:
rev-parse: add --show-superproject-working-tree
Picking two versions of Git and running tests to make sure the
older one and the newer one interoperate happily has now become
possible.
* jk/interop-test:
t/interop: add test of old clients against modern git-daemon
t: add an interoperability test harness
The experimental "split index" feature has gained a few
configuration variables to make it easier to use.
* cc/split-index-config: (22 commits)
Documentation/git-update-index: explain splitIndex.*
Documentation/config: add splitIndex.sharedIndexExpire
read-cache: use freshen_shared_index() in read_index_from()
read-cache: refactor read_index_from()
t1700: test shared index file expiration
read-cache: unlink old sharedindex files
config: add git_config_get_expiry() from gc.c
read-cache: touch shared index files when used
sha1_file: make check_and_freshen_file() non static
Documentation/config: add splitIndex.maxPercentChange
t1700: add tests for splitIndex.maxPercentChange
read-cache: regenerate shared index if necessary
config: add git_config_get_max_percent_split_change()
Documentation/git-update-index: talk about core.splitIndex config var
Documentation/config: add information for core.splitIndex
t1700: add tests for core.splitIndex
update-index: warn in case of split-index incoherency
read-cache: add and then use tweak_split_index()
split-index: add {add,remove}_split_index() functions
config: add git_config_get_split_index()
...
When using the --recurse-submodules flag with a relative pathspec which
includes "..", an error is produced inside the child process spawned for a
submodule. When creating the pathspec struct in the child, the ".." is
interpreted to mean "go up a directory" which causes an error stating that the
path ".." is outside of the repository.
While it is true that ".." is outside the scope of the submodule, it is
confusing to a user who originally invoked the command where ".." was indeed
still inside the scope of the superproject. Since the child process launched
for the submodule has some context that it is operating underneath a
superproject, this error could be avoided.
This patch fixes the bug by passing the 'prefix' to the child process. Now
each child process that works on a submodule has two points of reference to the
superproject: (1) the 'super_prefix' which is the path from the root of the
superproject down to root of the submodule and (2) the 'prefix' which is the
path from the root of the superproject down to the directory where the user
invoked the git command.
With these two pieces of information a child process can correctly interpret
the pathspecs provided by the user as well as being able to properly format its
output relative to the directory the user invoked the original command from.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the --recurse-submodules flag with a relative pathspec which
includes "..", an error is produced inside the child process spawned for
a submodule. When creating the pathspec struct in the child, the ".."
is interpreted to mean "go up a directory" which causes an error stating
that the path ".." is outside of the repository.
While it is true that ".." is outside the scope of the submodule, it is
confusing to a user who originally invoked the command where ".." was
indeed still inside the scope of the superproject. Since the child
process launched for the submodule has some context that it is operating
underneath a superproject, this error could be avoided.
This patch fixes the bug by passing the 'prefix' to the child process.
Now each child process that works on a submodule has two points of
reference to the superproject: (1) the 'super_prefix' which is the path
from the root of the superproject down to root of the submodule and (2)
the 'prefix' which is the path from the root of the superproject down to
the directory where the user invoked the git command.
With these two pieces of information a child process can correctly
interpret the pathspecs provided by the user as well as being able to
properly format its output relative to the directory the user invoked
the original command from.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a future patch child processes which act on submodules need a little
more context about the original command that was invoked. This patch
teaches git to use the prefix stored in `GIT_INTERNAL_TOPLEVEL_PREFIX`
instead of the prefix that was potentally found during the git directory
setup process.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git-credential-cache follow the XDG base path specification by
default. This increases consistency with other applications and helps
keep clutter out of users' home directories.
Check the old socket location, ~/.git-credential-cache/, and use
~/.git-credential-cache/socket if that directory exists rather than
forcing users who have used `git credential-cache` before to migrate to
the new XDG compliant location.
Otherwise use the socket $XDG_CACHE_HOME/git/credential/socket following
XDG base path specification. Use the subdirectory credential/ in case
other files are cached under $XDG_CACHE_HOME/git/ in the future and to
make the socket's purpose clear.
Signed-off-by: Devin Lehmacher <lehmacdj@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the 'is_submodule_initialized()' helper to check for configured
submodules instead of manually checking for the submodule's URL in the
config.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sync does some work determining what URLs should be used for a submodule
but then throws this work away if the submodule isn't active. Instead
perform the activity check earlier and skip inactive submodule in order
to avoid doing unnecessary work.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The definition of which submodules are of interest by the user
is tied to the configuration submodule.<name>.url; when it is
set to a non-empty string, it is of interest. We'd want to be
able to later change this definition, but there are many places
that explicitly check this condition in the scripted Porcelain.
Introduce the "is-active" subcommand to "submodule--helper", so
that the exact definition of what submodule is of interest can
be centrally defined (and changed in later steps). In a few
patches that follow, this helper is used to replace the explicit
checks of the configuration variable in scripts.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to use the SHA1 implementation from the OpenSSL library by
default. As we are trying to be careful against collision attacks
after the recent "shattered" announcement, switch the default to
encourage people to use DC_SHA1 implementation instead. Those who
want to use the implementation from OpenSSL can explicitly ask for
it by OPENSSL_SHA1=YesPlease when running "make".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't actually have a Git-object collision, so the best
we can do is to run one of the shattered PDFs through
test-sha1. This should trigger the collision check and die.
In a sense this isn't really checking anything that the
upstream sha1collisiondetection project doesn't cover
already. But it at least makes sure that our build correctly
uses the library.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This knob lets you use the sha1dc implementation from:
https://github.com/cr-marcstevens/sha1collisiondetection
which can detect certain types of collision attacks (even
when we only see half of the colliding pair). So it
mitigates any attack which consists of getting the "good"
half of a collision into a trusted repository, and then
later replacing it with the "bad" half. The "good" half is
rejected by the victim's version of Git (and even if they
run an old version of Git, any sha1dc-enabled git will
complain loudly if it ever has to interact with the object).
The big downside is that it's slower than either the openssl
or block-sha1 implementations.
Here are some timings based off of linux.git:
- compute sha1 over whole packfile
sha1dc: 3.580s
blk-sha1: 2.046s (-43%)
openssl: 1.335s (-62%)
- rev-list --all --objects
sha1dc: 33.512s
blk-sha1: 33.514s (+0.0%)
openssl: 33.650s (+0.4%)
- git log --no-merges -10000 -p
sha1dc: 8.124s
blk-sha1: 7.986s (-1.6%)
openssl: 8.203s (+0.9%)
- index-pack --verify
sha1dc: 4m19s
blk-sha1: 2m57s (-32%)
openssl: 2m19s (-42%)
So overall the sha1 computation with collision detection is
about 1.75x slower than block-sha1, and 2.7x slower than
sha1. But of course most operations do more than just sha1.
Normal object access isn't really slowed at all (both the
+/- changes there are well within the run-to-run noise); any
changes are drowned out by the other work Git is doing.
The most-affected operation is `index-pack --verify`, which
is essentially just computing the sha1 on every object. This
is similar to the `index-pack` invocation that the receiver
of a push or fetch would perform. So clearly there's some
extra CPU load here.
There will also be some latency for the user, though keep in
mind that such an operation will generally be network bound
(this is about a 1.2GB packfile). Some of that extra CPU is
"free" in the sense that we use it while the pack is
streaming in anyway. But most of it comes during the
delta-resolution phase, after the whole pack has been
received. So we can imagine that for this (quite large)
push, the user might have to wait an extra 100 seconds over
openssl (which is what we use now). If we assume they can
push to us at 20Mbit/s, that's 480s for a 1.2GB pack, which
is only 20% slower.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the conversion from shell to C in 56dc3ab04 (sequencer
(rebase -i): implement the 'edit' command, 2017-01-02),
stopping at an "edit" instruction went from:
$ git rebase -i
Stopped at 6ce6b914a... odb_pack_keep(): stop generating keepfile name
You can amend the commit now, with
[...more instructions...]
to:
$ git rebase -i
warning: stopped at 6ce6b914a... odb_pack_keep(): stop generating keepfile name
You can amend the commit now, with
[...more instructions...]
The "warning" implies that it's something unexpected, but
it's not. Let's switch back to the original message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The safe_hash feature is designed to make sha1dc a drop-in
replacement for sha1, where colliding entries will get a
permuted hash to un-collide them. However, since we're
handling the collision case ourselves, this isn't helpful
(and is actually harmful, as it means you get the wrong
object id if you want to show it in a log message).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can replace system includes with git-compat-util.h or
cache.h (and should make sure it is included first in all C
files). And we can drop includes from headers entirely, as
every C file should include git-compat-util.h itself.
We will add in new include guards around the header files,
though (otherwise you get into trouble including both
sha1dc/sha1.h and cache.h).
And finally, we'll use the full "sha1dc/" path for including
related files. This isn't strictly necessary, but makes the
expected resolution more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is pulled straight from:
https://github.com/cr-marcstevens/sha1collisiondetection
with no modifications yet (though I've pulled in only the
subset of files necessary for Git to use).
This is commit 007905a93c973f55b2daed6585f9f6c23545bf66.
Further updates can be done like:
git checkout -b vendor-sha1dc $this_commit
cp /path/to/sha1dc/{LICENSE.txt,lib/*} sha1dc/
git add -A sha1dc
git commit -m "update sha1dc"
git checkout -b update-sha1dc origin
git merge vendor-sha1dc
Thanks to both Marc and Dan for making the code fit our
needs by doing both optimization work, cutting down on the
object size, and doing some syntactic changes to work better
with git. And to Linus for kicking off the "diet" work that
removed some of the unused code.
The license of the sha1dc code is the MIT license, which is
obviously compatible with the GPLv2 of git.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new known failure mode is introduced[1], which is actually not
a failure but a feature in read-tree. Unlike checkout for which
the recursive submodule tests were originally written, read-tree does
warn about ignored untracked files that would be overwritten.
For the sake of keeping the test library for submodules generic, just
mark the test as a failure.
[1] KNOWN_FAILURE_SUBMODULE_OVERWRITE_IGNORED_UNTRACKED
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This exposes a flag to recurse into submodules
in builtin/checkout making use of the code implemented
in prior patches.
A new failure mode is introduced in the submodule
update library, as the directory/submodule conflict
is not solved in prior patches.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule is introduced with a new revision
we need to create the submodule in the worktree as well.
As 'submodule_move_head' handles edge cases, all we have
to do is call it from within the function that creates
new files in the working tree for workingtree operations.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later patch we'll support submodule entries to be
in sync with the tree in working tree changing commands,
such as checkout or read-tree.
When a new submodule entry changes in the tree, we need to
check if there are conflicts (directory/file conflicts)
for the tree. Add this check for submodules to be
performed before the working tree is touched.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check (which uses the old oid) is yet to be implemented, but this part
is just a refactor, so it can go separately first.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In later patches we introduce the options and flag for commands
that modify the working directory, e.g. git-checkout.
This piece of code will be used universally for
all these working tree modifications as it
* supports dry run to answer the question:
"Is it safe to change the submodule to this new state?"
e.g. is it overwriting untracked files or are there local
changes that would be overwritten?
* supports a force flag that can be used for resetting
the tree.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later patch we need to use the super_prefix, and
in case it is NULL we can just assume it is empty.
Create a helper function for this.
We already have some use cases for this helper function,
convert them, too.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later patch we need to prepare the submodule environment with
another git directory, so split up the function.
Also move it up in the file such that we do not need to declare the
function later before using it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In later patches we introduce the --recurse-submodule flag for commands
that modify the working directory, e.g. git-checkout.
It is potentially expensive to check if a submodule needs an update,
because a common theme to interact with submodules is to spawn a child
process for each interaction.
So let's introduce a function that checks if a submodule needs
to be checked for an update before attempting the update.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In later patches we introduce the options and flag for commands
that modify the working directory, e.g. git-checkout.
Have a central place to store such settings whether we want to update
a submodule.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to b33a15b08 (push: add recurseSubmodules config option,
2015-11-17) and 027771fcb1 (submodule: allow erroneous values for the
fetchRecurseSubmodules option, 2015-08-17), we add submodule-config code
that is later used to parse whether we are interested in updating
submodules.
We need the `die_on_error` parameter to be able to call this parsing
function for the config file as well, which if incorrect lets Git die.
As we're just touching the header file, also mark all functions extern.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need the gentle version in a later patch. As we have just one caller,
migrate the caller.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently lib-submodule-update.sh provides 2 functions
test_submodule_switch and test_submodule_forced_switch that are used by a
variety of tests to ensure that submodules behave as expected. The current
expected behavior is that submodules are not touched at all (see
42639d2317 for the exact setup).
In the future we want to teach all these commands to recurse
into submodules. To do that, we'll add two testing functions to
submodule-update-lib.sh: test_submodule_switch_recursing and
test_submodule_forced_switch_recursing.
These two functions behave in analogy to the already existing functions
just with a different expectation on submodule behavior. The submodule
in the working tree is expected to be updated to the recorded submodule
version. The behavior is analogous to e.g. the behavior of files in a
nested directory in the working tree, where a change to the working tree
handles any arising directory/file conflicts just fine.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cleaning up code by generalising it.
Currently the mailing list discusses yet again how
to migrate away from sha1.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adding the repository itself as a submodule does not make sense in the
real world. In our test suite we used to do that out of convenience in
some tests as the current repository has easiest access for setting up
'just a submodule'.
However this doesn't quite test the real world, so let's do not follow
this pattern any further and actually create an independent repository
that we can use as a submodule.
When using './.' as the remote the superproject and submodule share the
same objects, such that testing if a given sha1 is a valid commit works
in either repository. As running commands in an unpopulated submodule
fall back to the superproject, this happens in `reset_work_tree_to`
to determine if we need to populate the submodule. Fix this bug by
checking in the actual remote now.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Redraw the ASCII art describing the setup using more space, such that
it is easier to understand. The leaf commits are now ordered the same
way the actual code is ordered.
Add empty lines to the setup code separating each of the leaf commits,
each starting with a "checkout -b".
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove code fragment from module_clone that duplicates functionality
of connect_work_tree_and_git_dir in dir.c
Signed-off-by: Valery Tolstov <me@vtolstov.org>
Reviewed-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later patch we'll use connect_work_tree_and_git_dir when the
directory for the gitlink file doesn't exist yet. This patch makes
connect_work_tree_and_git_dir safe to use for both cases of
either the git dir or the working dir missing.
To do so, we need to call safe_create_leading_directories[_const]
on both directories. However this has to happen before we construct
the absolute paths as real_pathdup assumes the directories to
be there already.
So for both the config file in the git dir as well as the .git link
file we need to
a) construct the name
b) call SCLD
c) get the absolute path
d) once a-c is done for both we can consume the absolute path
to compute the relative path to each other and store those
relative paths.
The implementation provided here puts a) and b) for both cases first,
and then performs c and d after.
One of the two users of 'connect_work_tree_and_git_dir' already checked
for the directory being there, so we can loose that check as
connect_work_tree_and_git_dir handles this functionality now.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-prompt has various describe styles, among them "describe" (by
annotated tags) and "default" (by exact match with any tag).
Add a mode "tag" that describes by any tag, annotated or not.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The cherry-pick and revert commands use OPT_INTEGER() to
parse --mainline. The stock parser is smart enough to reject
non-numeric nonsense, but it doesn't know that parent
counting starts at 1.
Worse, the value "0" is indistinguishable from the unset
case, so a user who assumes the counting is 0-based will get
a confusing message:
$ git cherry-pick -m 0 $merge
error: commit ... is a merge but no -m option was given.
Let's use a custom callback that enforces our range.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Detect the null object ID for symlinks in dir-diff so that difftool can
detect when symlinks are modified in the worktree.
Previously, a null symlink object ID would crash difftool.
Handle null object IDs as unknown content that must be read from
the worktree.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many developers use functionality in their editors that allows for quick
syntax checks, including warning about questionable constructs. This
functionality allows rapid development with fewer errors. However, such
functionality generally does not allow the specification of
project-specific defines or command-line options.
Since the SHA1_HEADER include is not defined in such a case,
developers see spurious errors when using these tools. Furthermore,
there are known implementations of "cc" whose '#include' is unhappy
with this construct.
Instead of using SHA1_HEADER, create a hash.h header and use #if
and #elif to select the desired header. Have the Makefile pass an
appropriate option to help the header select the right implementation to
use.
[jc: make BLK_SHA1 the fallback default as discussed on list,
e.g. <20170314201424.vccij5z2ortq4a4o@sigill.intra.peff.net>; also
remove SHA1_HEADER and SHA1_HEADER_SQ that are no longer used].
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch --list" takes the "--abbrev" and "--no-abbrev" options
to control the output of the object name in its "-v"(erbose)
output, but a recent update started ignoring them; this fixes it
before the breakage reaches to any released version.
* kn/ref-filter-branch-list:
branch: honor --abbrev/--no-abbrev in --list mode
"git push" had a handful of codepaths that could lead to a deadlock
when unexpected error happened, which has been fixed.
* jk/push-deadlock-regression-fix:
send-pack: report signal death of pack-objects
send-pack: read "unpack" status even on pack-objects failure
send-pack: improve unpack-status error messages
send-pack: use skip_prefix for parsing unpack status
send-pack: extract parsing of "unpack" response
receive-pack: fix deadlock when we cannot create tmpdir
Recent versions of Git treats http alternates (used in dumb http
transport) just like HTTP redirects and requires the client to
enable following it, due to security concerns. But we forgot to
give a warning when we decide not to honor the alternates.
* ew/http-alternates-as-redirects-warning:
http: release strbuf on disabled alternates
http: inform about alternates-as-redirects behavior
"git filter-branch --prune-empty" drops a single-parent commit that
becomes a no-op, but did not drop a root commit whose tree is empty.
* dp/filter-branch-prune-empty:
p7000: add test for filter-branch with --prune-empty
filter-branch: fix --prune-empty on parentless commits
t7003: ensure --prune-empty removes entire branch when applicable
t7003: ensure --prune-empty can prune root commit
The t/perf performance test suite was not prepared to test not so
old versions of Git, but now it covers versions of Git that are not
so ancient.
* jt/perf-updates:
t/perf: add fallback for pre-bin-wrappers versions of git
t/perf: use $MODERN_GIT for all repo-copying steps
t/perf: export variable used in other blocks
"git fetch" that requests a commit by object name, when the other
side does not allow such an request, failed without much
explanation.
* mm/fetch-show-error-message-on-unadvertised-object:
fetch-pack: add specific error for fetching an unadvertised object
fetch_refs_via_pack: call report_unmatched_refs
fetch-pack: move code to report unmatched refs to a function
"git branch @" created refs/heads/@ as a branch, and in general the
code that handled @{-1} and @{upstream} was a bit too loose in
disambiguating.
* jk/interpret-branch-name:
checkout: restrict @-expansions when finding branch
strbuf_check_ref_format(): expand only local branches
branch: restrict @-expansions when deleting
t3204: test git-branch @-expansion corner cases
interpret_branch_name: allow callers to restrict expansions
strbuf_branchname: add docstring
strbuf_branchname: drop return value
interpret_branch_name: move docstring to header file
interpret_branch_name(): handle auto-namelen for @{-1}
A few tests were run conditionally under (rare) conditions where
they cannot be run (like running cvs tests under 'root' account).
* ab/cond-skip-tests:
gitweb tests: skip tests when we don't have Time::HiRes
gitweb tests: change confusing "skip_all" phrasing
cvs tests: skip tests that call "cvs commit" when running as root
During the review of the `early-config` patch series, two issues
have been identified that have been with us forever. Mark the
identified problems for later so that we do not forget them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King came up with a couple examples that demonstrate how the new
read_early_config() that looks harder for the current .git/ directory
could die() in an undesirable way.
Let's add those cases to the test script, to document what we would like
to happen when early config encounters problems.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function now has a new caller in addition to setup_git_directory():
the newly introduced discover_git_directory(). That function wants to
discover the current .git/ directory, and in case of a corrupted one
simply pretend that there is none to be found.
Example: if a stale .git file exists in the parent directory, and the
user calls `git -p init`, we want Git to simply *not* read any
repository config for the pager (instead of aborting with a message that
the .git file is corrupt).
Let's actually pretend that there was no GIT_DIR to be found in that case
when being called from discover_git_directory(), but keep the previous
behavior (i.e. to die()) for the setup_git_directory() case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, we punted and simply assumed that we are in the top-level
directory of the project, and that there is no .git file but a .git/
directory so that we can read directly from .git/config.
However, that is not necessarily true. We may be in a subdirectory. Or
.git may be a gitfile. Or the environment variable GIT_DIR may be set.
To remedy this situation, we just refactored the way
setup_git_directory() discovers the .git/ directory, to make it
reusable, and more importantly, to leave all global variables and the
current working directory alone.
Let's discover the .git/ directory correctly in read_early_config() by
using that new function.
This fixes 4 known breakages in t7006.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far, we only look whether the startup_info claims to have seen a
git_dir.
However, do_git_config_sequence() (and consequently the
git_config_with_options() call used by read_early_config() asks the
have_git_dir() function whether we have a .git/ directory, which in turn
also looks at git_dir and at the environment variable GIT_DIR. And when
this is the case, the repository config is handled already, so we do not
have to do that again explicitly.
Let's just use the same function, have_git_dir(), to determine whether we
have to handle .git/config explicitly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pager configuration needs to be read early, possibly before
discovering any .git/ directory.
Let's not hide this function in pager.c, but make it available to other
callers.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We modified the setup_git_directory_gently_1() function earlier to make
it possible to discover the GIT_DIR without changing global state.
However, it is still a bit cumbersome to use if you only need to figure
out the (possibly absolute) path of the .git/ directory. Let's just
provide a convenient wrapper function with an easier signature that
*just* discovers the .git/ directory.
We will use it in a subsequent patch to fix the early config.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For historical reasons, Git searches for the .git/ directory (or the
.git file) by changing the working directory successively to the parent
directory of the current directory, until either anything was found or
until a ceiling or a mount point is hit.
Further global state may be changed in case a .git/ directory was found.
We do have a use case, though, where we would like to find the .git/
directory without having any global state touched, though: when we read
the early config e.g. for the pager or for alias expansion.
Let's just move all of code that changes any global state out of the
function `setup_git_directory_gently_1()` into
`setup_git_directory_gently()`.
In subsequent patches, we will use the _1() function in a new
`discover_git_directory()` function that we will then use for the early
config code.
Note: the new loop is a *little* tricky, as we have to handle the root
directory specially: we cannot simply strip away the last component
including the slash, as the root directory only has that slash. To remedy
that, we introduce the `min_offset` variable that holds the minimal length
of an absolute path, and using that to special-case the root directory,
including an early exit before trying to find the parent of the root
directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the offset parameter (indicating what part of the cwd
parameter corresponds to the current directory after discovering the
.git/ directory) is set to 0 when we are running in the root directory.
However, in the next patches we will avoid changing the current working
directory while searching for the .git/ directory, meaning that the
offset corresponding to the root directory will have to be 1 to reflect
that this directory is characterized by the path "/" (and not "").
So let's make sure that setup_discovered_git_directory() only tries to
append the trailing slash to non-root directories.
Note: the setup_bare_git_directory() does not need a corresponding
change, as it does not want to return a prefix.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we want to get the list of modified files, we first
expand any user-provided pathspecs with "ls-files", and then
feed the resulting list of paths as arguments to
"diff-index" and "diff-files". If your pathspec expands into
a large number of paths, you may run into one of two
problems:
1. The OS may complain about the size of the argument
list, and refuse to run. For example:
$ (ulimit -s 128 && git add -p drivers)
Can't exec "git": Argument list too long at .../git-add--interactive line 177.
Died at .../git-add--interactive line 177.
That's on the linux.git repository, which has about 20K
files in the "drivers" directory (none of them modified
in this case). The "ulimit -s" trick is necessary to
show the problem on Linux even for such a gigantic set
of paths. Other operating systems have much smaller
limits (e.g., a real-world case was seen with only 5K
files on OS X).
2. Even when it does work, it's really slow. The pathspec
code is not optimized for huge numbers of paths. Here's
the same case without the ulimit:
$ time git add -p drivers
No changes.
real 0m16.559s
user 0m53.140s
sys 0m0.220s
We can improve this by skipping "ls-files" completely, and
just feeding the original pathspecs to the diff commands.
This solution was discussed in 2010:
http://public-inbox.org/git/20100105041438.GB12574@coredump.intra.peff.net/
but at the time the diff code's pathspecs were more
primitive than those used by ls-files (e.g., they did not
support globs). Making the change would have caused a
user-visible regression, so we didn't.
Since then, the pathspec code has been unified, and the diff
commands natively understand pathspecs like '*.c'.
This patch implements that solution. That skips the
argument-list limits, and the result runs much faster:
$ time git add -p drivers
No changes.
real 0m0.149s
user 0m0.116s
sys 0m0.080s
There are two new tests. The first just exercises the
globbing behavior to confirm that we are not causing a
regression there. The second checks the actual argument
behavior using GIT_TRACE. We _could_ do it with the "ulimit
-s" trick, as above. But that would mean the test could only
run where "ulimit -s" works. And tests of that sort are
expensive, because we have to come up with enough files to
actually bust the limit (we can't just shrink the "128" down
infinitely, since it is also the in-program stack size).
Finally, two caveats and possibilities for future work:
a. This fixes one argument-list expansion, but there may
be others. In fact, it's very likely that if you run
"git add -i" and select a large number of modified
files that the script would try to feed them all to a
single git command.
In practice this is probably fine. The real issue here
is that the argument list was growing with the _total_
number of files, not the number of modified or selected
files.
b. If the repository contains filenames with literal wildcard
characters (e.g., "foo*"), the original code expanded
them via "ls-files" and then fed those wildcard names
to "diff-index", which would have treated them as
wildcards. This was a bug, which is now fixed (though
unless you really go through some contortions with
":(literal)", it's likely that your original pathspec
would match whatever the accidentally-expanded wildcard
would anyway).
So this takes us one step closer to working correctly
with files whose names contain wildcard characters, but
it's likely that others remain (e.g., if "git add -i"
feeds the selected paths to "git add").
Reported-by: Wincent Colaiuta <win@wincent.com>
Reported-by: Mislav Marohnić <mislav.marohnic@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In our own .gitattributes file we have attributes such as:
*.[ch] whitespace=indent,trail,space
When querying for attributes we want to be able to ask for the exact
value, i.e.
git ls-files :(attr:whitespace=indent,trail,space)
should work, but the commas are used in the attr magic to introduce
the next attr, such that this query currently fails with
fatal: Invalid pathspec magic 'trail' in ':(attr:whitespace=indent,trail,space)'
This change allows escaping characters by a backslash, such that the query
git ls-files :(attr:whitespace=indent\,trail\,space)
will match all path that have the value "indent,trail,space" for the
whitespace attribute. To accomplish this, we need to modify two places.
First `parse_long_magic` needs to not stop early upon seeing a comma or
closing paren that is escaped. As a second step we need to remove any
escaping from the attr value.
Based on a patch by Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pathspec mechanism is extended via the new
":(attr:eol=input)pattern/to/match" syntax to filter paths so that it
requires paths to not just match the given pattern but also have the
specified attrs attached for them to be chosen.
Based on a patch by Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have xdg_config_home to format paths relative to
XDG_CONFIG_HOME. Let's provide a similar function xdg_cache_home to do
the same for paths relative to XDG_CACHE_HOME.
Signed-off-by: Devin Lehmacher <lehmacdj@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --quiet" relies on the size field in diff_filespec to be
correctly populated, but diff_populate_filespec() helper function
made an incorrect short-cut when asked only to populate the size
field for paths that need to go through convert_to_git() (e.g. CRLF
conversion).
* jc/diff-populate-filespec-size-only-fix:
diff: do not short-cut CHECK_SIZE_ONLY check in diff_populate_filespec()
The command-line parsing of "git log -L" copied internal data
structures using incorrect size on ILP32 systems.
* vn/line-log-memcpy-size-fix:
line-log: use COPY_ARRAY to fix mis-sized memcpy
The code to parse "git log -L..." command line was buggy when there
are many ranges specified with -L; overrun of the allocated buffer
has been fixed.
* ax/line-log-range-merge-fix:
line-log.c: prevent crash during union of too many ranges
There is no need for Python only to give a few messages to the
standard error stream, but we somehow did.
* ss/remote-bzr-hg-placeholder-wo-python:
contrib: git-remote-{bzr,hg} placeholders don't need Python
Git v2.12 was shipped with an embarrassing breakage where various
operations that verify paths given from the user stopped dying when
seeing an issue, and instead later triggering segfault.
* js/realpath-pathdup-fix:
real_pathdup(): fix callsites that wanted it to die on error
t1501: demonstrate NULL pointer access with invalid GIT_WORK_TREE
The patch subcommand of "git add -i" was meant to have paths
selection prompt just like other subcommand, unlike "git add -p"
directly jumps to hunk selection. Recently, this was broken and
"add -i" lost the paths selection dialog, but it now has been
fixed.
* jk/add-i-patch-do-prompt:
add--interactive: fix missing file prompt for patch mode with "-i"
Sometimes a set of repositories want to share configuration settings
among themselves that are distinct from other such sets of repositories.
A user may work on two projects, each of which have multiple
repositories, and use one user.email for one project while using another
for the other.
Setting $GIT_DIR/.config works, but if the penalty of forgetting to
update $GIT_DIR/.config is high (especially when you end up cloning
often), it may not be the best way to go. Having the settings in
~/.gitconfig, which would work for just one set of repositories, would
not well in such a situation. Having separate ${HOME}s may add more
problems than it solves.
Extend the include.path mechanism that lets a config file include
another config file, so that the inclusion can be done only when some
conditions hold. Then ~/.gitconfig can say "include config-project-A
only when working on project-A" for each project A the user works on.
In this patch, the only supported grouping is based on $GIT_DIR (in
absolute path), so you would need to group repositories by directory, or
something like that to take advantage of it.
We already have include.path for unconditional includes. This patch goes
with includeIf.<condition>.path to make it clearer that a condition is
required. The new config has the same backward compatibility approach as
include.path: older git versions that don't understand includeIf will
simply ignore them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The phrasing in this paragraph may give an impression that you can only
use it once. Rephrase it a bit.
Helped-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash save" takes a pathspec so that the local changes can be
stashed away only partially.
* tg/stash-push:
stash: allow pathspecs in the no verb form
stash: use stash_push for no verb form
stash: teach 'push' (and 'create_stash') to honor pathspec
stash: refactor stash_create
stash: add test for the create command line arguments
stash: introduce push verb
When "git submodule init" decides that the submodule in the working
tree is its upstream, it now gives a warning as it is not a very
common setup.
* sb/submodule-init-url-selection:
submodule init: warn about falling back to a local path
When a redirected http transport gets an error during the
redirected request, we ignored the error we got from the server,
and ended up giving a not-so-useful error message.
* jt/http-base-url-update-upon-redirect:
http: attempt updating base URL only if no error
Reduce authentication round-trip over HTTP when the server supports
just a single authentication method.
* jk/http-auth:
http: add an "auto" mode for http.emptyauth
http: restrict auth methods to what the server advertises
"Cc:" on the trailer part does not have to conform to RFC strictly,
unlike in the e-mail header. "git send-email" has been updated to
ignore anything after '>' when picking addresses, to allow non-address
cruft like " # stable 4.4" after the address.
* jh/send-email-one-cc:
send-email: only allow one address per body tag
An helper function to make it easier to append the result from
real_path() to a strbuf has been added.
* rs/strbuf-add-real-path:
strbuf: add strbuf_add_real_path()
cocci: use ALLOC_ARRAY
A leak in a codepath to read from a packed object in (rare) cases
has been plugged.
* rs/sha1-file-plug-fallback-base-leak:
sha1_file: release fallback base's memory in unpack_entry()
The code that parses header fields in the commit object has been
updated for (micro)performance and code hygiene.
* rs/commit-parsing-optim:
commit: don't check for space twice when looking for header
commit: be more precise when searching for headers
The "parse_config_key()" API function has been cleaned up.
* jk/parse-config-key-cleanup:
parse_hide_refs_config: tell parse_config_key we don't want a subsection
parse_config_key: allow matching single-level config
parse_config_key: use skip_prefix instead of starts_with
"git upload-pack", which is a counter-part of "git fetch", did not
report a request for a ref that was not advertised as invalid.
This is generally not a problem (because "git fetch" will stop
before making such a request), but is the right thing to do.
* jt/upload-pack-error-report:
upload-pack: report "not our ref" to client
user.email that consists of only cruft chars should consistently
error out, but didn't.
* jk/ident-empty:
ident: do not ignore empty config name/email
ident: reject all-crud ident name
ident: handle NULL email when complaining of empty name
ident: mark error messages for translation
The code to parse "git -c VAR=VAL cmd" and set configuration
variable for the duration of cmd had two small bugs, which have
been fixed.
* jc/config-case-cmdline-take-2:
config: use git_config_parse_key() in git_config_parse_parameter()
config: move a few helper functions up
The algorithm which powers "tag --contains" uses the
TMP_MARK and UNINTERESTING bits, but never cleans up after
itself. As a result, stale UNINTERESTING bits may impact
later traversals (like "--merged").
We could fix this by clearing the bits after we're done with
the --contains traversal. That would be enough to fix the
existing problem, but it leaves future developers in a bad
spot: they cannot add other traversals that operate
simultaneously with --contains (e.g., if you wanted to add
"--no-contains" and use both filters at the same time).
Instead, we can use a commit slab to store our cached
results, which will store the bits outside of the commit
structs entirely. This adds an extra level of indirection,
but in my tests (running "git tag --contains HEAD" on
linux.git), there was no measurable slowdown.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tag-contains algorithm quietly returns "does not
contain" when parse_commit() fails. But a parse failure is
an indication that the repository is corrupt. We should die
loudly rather than producing a bogus result.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit cbc60b672 (git tag --contains: avoid stack overflow,
2014-04-24) adapted the -1/0/1 contains status into a
tri-state enum. However, some of the code still used the
numeric values, or assumed that no/yes correspond to C's
boolean true/false.
Let's switch to using the symbolic values everywhere, which
will make it easier to change them.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is an implementation detail of how filter_refs() works,
and does not need to be exposed to the outside world. This
will become more important in future patches as we add new
private data types to it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "branch --list" command was converted to use the --format
facility from the ref-filter API, we forgot to honor the --abbrev
setting in the default output format and instead used a hardcoded
"7".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some situations it is useful to know if the given repository
is a submodule of another repository.
Add the flag --show-superproject-working-tree to git-rev-parse
to make it easy to find out if there is a superproject. When no
superproject exists, the output will be empty.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is okay in practice to test for forward slashes in the output of
getcwd(), because we go out of our way to convert backslashes to forward
slashes in getcwd()'s output on Windows.
Still, the correct way to test for a dir separator is by using the
helper function we introduced for that very purpose. It also serves as a
good documentation what the code tries to do (not "how").
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way a share index file will not be garbage collected if
we still read from an index it is based from.
As we need to read the current index before creating a new
one, the tests have to be adjusted, so that we don't expect
an old shared index file to be deleted right away when we
create a new one.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It looks better and is simpler to review when we don't compute
the same things many times in the function.
It will also help make the following commit simpler.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Everytime split index is turned on, it creates a "sharedindex.XXXX"
file in the git directory. This change makes sure that shared index
files that haven't been used for a long time are removed when a new
shared index file is created.
The new "splitIndex.sharedIndexExpire" config variable is created
to tell the delay after which an unused shared index file can be
deleted. It defaults to "2.weeks.ago".
A previous commit made sure that each time a split index file is
created the mtime of the shared index file it references is updated.
This makes sure that recently used shared index file will not be
deleted.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idea of the test case "git -p - core.pager is not used from
subdirectory" was to verify that the setup_git_directory() function had
not been called just to obtain the core.pager setting.
However, we are about to fix the early config machinery so that it
*does* work, without messing up the global state.
Once that is done, the core.pager setting *will* be used, even when
running from a subdirectory, and that is a Good Thing.
The intention of that test case, however, was to verify that the
setup_git_directory() function has not run, because it changes global
state such as the current working directory.
To keep that spirit, but fix the incorrect assumption, this patch
replaces that test case by a new one that verifies that the pager is
run in the subdirectory, i.e. that the current working directory has
not been changed at the time the pager is configured and launched, even
if the `rev-parse` command requires a .git/ directory and *will* change
the working directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linking the description for pathname quoting to the configuration
variable "core.quotePath" removes inconstistent and incomplete
sections while also giving two hints how to deal with it: Either with
"-c core.quotePath=false" or with "-z".
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the email-style subject prefix (e.g. "Subject: [PATCH] ") directly
when it's needed instead of letting log_write_email_headers() prepare
it in a static buffer in advance. This simplifies storage ownership and
code flow.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function will be used in a following commit to get the expiration
time of the shared index files from the config, and it is generic
enough to be put in "config.c".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a split-index file is created, let's update the mtime of the
shared index file that the split-index file is referencing.
In a following commit we will make shared index file expire
depending on their mtime, so updating the mtime makes sure that
the shared index file will not be deleted soon.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function will be used in a commit soon, so let's make
it available globally.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a new split-index and there is a big number of cache
entries in the split-index compared to the shared index, it is a
good idea to regenerate the shared index.
By default when the ratio reaches 20%, we will push back all
the entries from the split-index into a new shared index file
instead of just creating a new split-index file.
The threshold can be configured using the
"splitIndex.maxPercentChange" config variable.
We need to adjust the existing tests in t1700 by setting
"splitIndex.maxPercentChange" to 100 at the beginning of t1700,
as the existing tests are assuming that the shared index is
regenerated only when `git update-index --split-index` is used.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new function will be used in a following commit to get the
value of the "splitIndex.maxPercentChange" config variable.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When users are using `git update-index --(no-)split-index`, they
may expect the split-index feature to be used or not according to
the option they just used, but this might not be the case if the
new "core.splitIndex" config variable has been set. In this case
let's warn about what will happen and why.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will make us use the split-index feature or not depending
on the value of the "core.splitIndex" config variable.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also use the functions in cmd_update_index() in
builtin/update-index.c.
These functions will be used in a following commit to tweak
our use of the split-index feature depending on the setting
of a configuration variable.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new function will be used in a following commit to know
if we want to use the split index feature or not.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This improves test indentation by getting rid of the outdated
here document style.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a strbuf to store the subject prefix string and move its
construction into its own function. This gets rid of two arbitrary
length limits and allows the string to be added by callers directly.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that stash_push is used in the no verb form of stash, allow
specifying the command line for this form as well. Always use -- to
disambiguate pathspecs from other non-option arguments.
Also make git stash -p an alias for git stash push -p. This allows
users to use git stash -p <pathspec>.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have stash_push, which accepts pathspec arguments, use
it instead of stash_save in git stash without any additional verbs.
Previously we allowed git stash -- -message, which is no longer allowed
after this patch. Messages starting with a hyphen was allowed since
3c2eb80f, ("stash: simplify defaulting to "save" and reject unknown
options"). However it was never the intent to allow that, but rather it
was allowed accidentally.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While working on a repository, it's often helpful to stash the changes
of a single or multiple files, and leave others alone. Unfortunately
git currently offers no such option. git stash -p can be used to work
around this, but it's often impractical when there are a lot of changes
over multiple files.
Allow 'git stash push' to take pathspec to specify which paths to stash.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule is initialized, the config variable 'submodule.<name>.url'
is set depending on the value of the same variable in the .gitmodules
file. When the URL indicates to be relative, then the url is computed
relative to its default remote. The default remote cannot be determined
accurately in all cases, such that it falls back to 'origin'.
The 'origin' remote may not exist, though. In that case we give up looking
for a suitable remote and we'll just assume it to be a local relative path.
This can be confusing to users as there is a lot of guessing involved,
which is not obvious to the user.
So in the corner case of assuming a local autoritative truth, warn the
user to lessen the confusion.
This behavior was introduced in 4d6893200 (submodule add: allow relative
repository path even when no url is set, 2011-06-06), which shared the
code with submodule-init and then ported to C in 3604242f08 (submodule:
port init from shell to C, 2016-04-15).
In case of submodule-add, this behavior makes sense in some use cases[1],
however for submodule-init there does not seem to be an immediate obvious
use case to fall back to a local submodule. However there might be, so
warn instead of die here.
While adding the warning, also clarify the behavior of relative URLs in
the documentation.
[1] e.g. http://stackoverflow.com/questions/8721984/git-ignore-files-for-public-repository-but-not-for-private
"store a secret locally in a submodule, with no intention to publish it"
Reported-by: Shawn Pearce <spearce@spearce.org>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote rm X", when a branch has remote X configured as the
value of its branch.*.remote, tried to remove branch.*.remote and
branch.*.merge and failed if either is unset.
* rl/remote-allow-missing-branch-name-merge:
remote: ignore failure to remove missing branch.<name>.merge
"git update-ref -d" and other operations to delete references did
not leave any entry in HEAD's reflog when the reference being
deleted was the current branch. This is not a problem in practice
because you do not want to delete the branch you are currently on,
but caused renaming of the current branch to something else not to
be logged in a useful way.
* km/delete-ref-reflog-message:
branch: record creation of renamed branch in HEAD's log
rename_ref: replace empty message in HEAD's log
update-ref: pass reflog message to delete_ref()
delete_ref: accept a reflog message argument
A caller of tempfile API that uses stdio interface to write to
files may ignore errors while writing, which is detected when
tempfile is closed (with a call to ferror()). By that time, the
original errno that may have told us what went wrong is likely to
be long gone and was overwritten by an irrelevant value.
close_tempfile() now resets errno to EIO to make errno at least
predictable.
* jk/tempfile-ferror-fclose-confusion:
tempfile: set errno to a known value before calling ferror()
"git diff -W" has been taught to handle the case where a new
function is added at the end of the file better.
* vn/xdiff-func-context:
xdiff -W: relax end-of-file function detection
The "--git-path", "--git-common-dir", and "--shared-index-path"
options of "git rev-parse" did not produce usable output. They are
now updated to show the path to the correct file, relative to where
the caller is.
* js/git-path-in-subdir:
rev-parse: fix several options when running in a subdirectory
rev-parse tests: add tests executed from a subdirectory
Code clean-up and a string truncation fix.
* mm/two-more-xstrfmt:
bisect_next_all: convert xsnprintf to xstrfmt
stop_progress_msg: convert xsnprintf to xstrfmt
The code to parse the command line "git grep <patterns>... <rev>
[[--] <pathspec>...]" has been cleaned up, and a handful of bugs
have been fixed (e.g. we used to check "--" if it is a rev).
* jk/grep-no-index-fix:
grep: treat revs the same for --untracked as for --no-index
grep: do not diagnose misspelt revs with --no-index
grep: avoid resolving revision names in --no-index case
grep: fix "--" rev/pathspec disambiguation
grep: re-order rev-parsing loop
grep: do not unnecessarily query repo for "--"
grep: move thread initialization a little lower
Some warning() messages from "git clean" were updated to show the
errno from failed system calls.
* nd/clean-preserve-errno-in-warning:
clean: use warning_errno() when appropriate
"git show-branch" expected there were only very short branch names
in the repository and used a fixed-length buffer to hold them
without checking for overflow.
* jk/show-branch-lift-name-len-limit:
show-branch: use skip_prefix to drop magic numbers
show-branch: store resolved head in heap buffer
show-branch: drop head_len variable
"git ls-remote" and "git archive --remote" are designed to work
without being in a directory under Git's control. However, recent
updates revealed that we randomly look into a directory called
.git/ without actually doing necessary set-up when working in a
repository. Stop doing so.
* jn/remote-helpers-with-git-dir:
remote helpers: avoid blind fall-back to ".git" when setting GIT_DIR
remote: avoid reading $GIT_DIR config in non-repo
A "gc.log" file left by a backgrounded "gc --auto" disables further
automatic gc; it has been taught to run at least once a day (by
default) by ignoring a stale "gc.log" file that is too old.
* dt/gc-ignore-old-gc-logs:
gc: ignore old gc.log files
The preload-index code has been taught not to bother with the index
entries that are paths that are not checked out by "sparse checkout".
* jh/preload-index-skip-skip:
preload-index: avoid lstat for skip-worktree items
Code and design clean-up for the refs API.
* mh/submodule-hash:
read_loose_refs(): read refs using resolve_ref_recursively()
files_ref_store::submodule: use NULL for the main repository
base_ref_store_init(): remove submodule argument
refs: push the submodule attribute down
refs: store submodule ref stores in a hashmap
register_ref_store(): new function
refs: remove some unnecessary handling of submodule == ""
refs: make some ref_store lookup functions private
refs: reorder some function definitions
The command line options for ssh invocation needs to be tweaked for
some implementations of SSH (e.g. PuTTY plink wants "-P <port>"
while OpenSSH wants "-p <port>" to specify port to connect to), and
the variant was guessed when GIT_SSH environment variable is used
to specify it. The logic to guess now applies to the command
specified by the newer GIT_SSH_COMMAND and also core.sshcommand
configuration variable, and comes with an escape hatch for users to
deal with misdetected cases.
* sf/putty-w-args:
connect.c: stop conflating ssh command names and overrides
connect: Add the envvar GIT_SSH_VARIANT and ssh.variant config
git_connect(): factor out SSH variant handling
connect: rename tortoiseplink and putty variables
connect: handle putty/plink also in GIT_SSH_COMMAND
"git rebase -i" starts using the recently updated "sequencer" code.
* js/rebase-helper:
rebase -i: use the rebase--helper builtin
rebase--helper: add a builtin helper for interactive rebases
The gitattributes machinery is being taught to work better in a
multi-threaded environment.
* bw/attr: (27 commits)
attr: reformat git_attr_set_direction() function
attr: push the bare repo check into read_attr()
attr: store attribute stack in attr_check structure
attr: tighten const correctness with git_attr and match_attr
attr: remove maybe-real, maybe-macro from git_attr
attr: eliminate global check_all_attr array
attr: use hashmap for attribute dictionary
attr: change validity check for attribute names to use positive logic
attr: pass struct attr_check to collect_some_attrs
attr: retire git_check_attrs() API
attr: convert git_check_attrs() callers to use the new API
attr: convert git_all_attrs() to use "struct attr_check"
attr: (re)introduce git_check_attr() and struct attr_check
attr: rename function and struct related to checking attributes
attr.c: outline the future plans by heavily commenting
Documentation: fix a typo
attr.c: add push_stack() helper
attr: support quoting pathname patterns in C style
attr.c: plug small leak in parse_attr_line()
attr.c: tighten constness around "git_attr" structure
...
Clean-up and updates to command line completion (in contrib/).
* sg/completion: (22 commits)
completion: restore removed line continuating backslash
completion: cache the path to the repository
completion: extract repository discovery from __gitdir()
completion: don't guard git executions with __gitdir()
completion: consolidate silencing errors from git commands
completion: don't use __gitdir() for git commands
completion: respect 'git -C <path>'
rev-parse: add '--absolute-git-dir' option
completion: fix completion after 'git -C <path>'
completion: don't offer commands when 'git --opt' needs an argument
completion: list short refs from a remote given as a URL
completion: don't list 'HEAD' when trying refs completion outside of a repo
completion: list refs from remote when remote's name matches a directory
completion: respect 'git --git-dir=<path>' when listing remote refs
completion: fix most spots not respecting 'git --git-dir=<path>'
completion: ensure that the repository path given on the command line exists
completion tests: add tests for the __git_refs() helper function
completion tests: check __gitdir()'s output in the error cases
completion tests: consolidate getting path of current working directory
completion tests: make the $cur variable local to the test helper functions
...
The "negative" pathspec feature was somewhat more cumbersome to use
than necessary in that its short-hand used "!" which needed to be
escaped from shells, and it required "exclude from what?" specified.
* lt/pathspec-negative:
pathspec: don't error out on all-exclusionary pathspec patterns
pathspec magic: add '^' as alias for '!'
"git tag" did not leave useful message when adding a new entry to
reflog; this was left unnoticed for a long time because refs/tags/*
doesn't keep reflog by default.
* cw/tag-reflog-message:
tag: generate useful reflog message
Optimizes resource usage while enumerating refs from alternate
object store, to help receiving end of "push" that hosts a
repository with many "forks".
* jk/alternate-ref-optim:
receive-pack: avoid duplicates between our refs and alternates
receive-pack: treat namespace .have lines like alternates
receive-pack: fix misleading namespace/.have comment
receive-pack: use oidset to de-duplicate .have lines
add oidset API
fetch-pack: cache results of for_each_alternate_ref
for_each_alternate_ref: replace transport code with for-each-ref
for_each_alternate_ref: pass name/oid instead of ref struct
for_each_alternate_ref: use strbuf for path allocation
for_each_alternate_ref: stop trimming trailing slashes
for_each_alternate_ref: handle failure from real_pathdup()
The code to list branches in "git branch" has been consolidated
with the more generic ref-filter API.
* kn/ref-filter-branch-list: (21 commits)
ref-filter: resurrect "strip" as a synonym to "lstrip"
branch: implement '--format' option
branch: use ref-filter printing APIs
branch, tag: use porcelain output
ref-filter: allow porcelain to translate messages in the output
ref-filter: add an 'rstrip=<N>' option to atoms which deal with refnames
ref-filter: modify the 'lstrip=<N>' option to work with negative '<N>'
ref-filter: Do not abruptly die when using the 'lstrip=<N>' option
ref-filter: rename the 'strip' option to 'lstrip'
ref-filter: make remote_ref_atom_parser() use refname_atom_parser_internal()
ref-filter: introduce refname_atom_parser()
ref-filter: introduce refname_atom_parser_internal()
ref-filter: make "%(symref)" atom work with the ':short' modifier
ref-filter: add support for %(upstream:track,nobracket)
ref-filter: make %(upstream:track) prints "[gone]" for invalid upstreams
ref-filter: introduce format_ref_array_item()
ref-filter: move get_head_description() from branch.c
ref-filter: modify "%(objectname:short)" to take length
ref-filter: implement %(if:equals=<string>) and %(if:notequals=<string>)
ref-filter: include reference to 'used_atom' within 'atom_value'
...
The <url> part in "http.<url>.<variable>" configuration variable
can now be spelled with '*' that serves as wildcard.
E.g. "http.https://*.example.com.proxy" can be used to specify the
proxy used for https://a.example.com, https://b.example.com, etc.,
i.e. any host in the example.com domain.
* ps/urlmatch-wildcard:
urlmatch: allow globbing for the URL host part
urlmatch: include host in urlmatch ranking
urlmatch: split host and port fields in `struct url_info`
urlmatch: enable normalization of URLs with globs
mailmap: add Patrick Steinhardt's work address
When "git merge" detects a path that is renamed in one history
while the other history deleted (or modified) it, it now reports
both paths to help the user understand what is going on in the two
histories being merged.
* mm/merge-rename-delete-message:
merge-recursive: make "CONFLICT (rename/delete)" message show both paths
Deletion of a branch "foo/bar" could remove .git/refs/heads/foo
once there no longer is any other branch whose name begins with
"foo/", but we didn't do so so far. Now we do.
* mh/ref-remove-empty-directory: (23 commits)
files_transaction_commit(): clean up empty directories
try_remove_empty_parents(): teach to remove parents of reflogs, too
try_remove_empty_parents(): don't trash argument contents
try_remove_empty_parents(): rename parameter "name" -> "refname"
delete_ref_loose(): inline function
delete_ref_loose(): derive loose reference path from lock
log_ref_write_1(): inline function
log_ref_setup(): manage the name of the reflog file internally
log_ref_write_1(): don't depend on logfile argument
log_ref_setup(): pass the open file descriptor back to the caller
log_ref_setup(): improve robustness against races
log_ref_setup(): separate code for create vs non-create
log_ref_write(): inline function
rename_tmp_log(): improve error reporting
rename_tmp_log(): use raceproof_create_file()
lock_ref_sha1_basic(): use raceproof_create_file()
lock_ref_sha1_basic(): inline constant
raceproof_create_file(): new function
safe_create_leading_directories(): set errno on SCLD_EXISTS
safe_create_leading_directories_const(): preserve errno
...
"git repack --depth=<n>" for a long time busted the specified depth
when reusing delta from existing packs. This has been corrected.
* jk/delta-chain-limit:
pack-objects: convert recursion to iteration in break_delta_chain()
pack-objects: enforce --depth limit in reused deltas
"git describe" and "git name-rev" have been taught to take more
than one refname patterns to restrict the set of refs to base their
naming output on, and also learned to take negative patterns to
name refs not to be used for naming via their "--exclude" option.
* jk/describe-omit-some-refs:
describe: teach describe negative pattern matches
describe: teach --match to accept multiple patterns
name-rev: add support to exclude refs by pattern match
name-rev: extend --refs to accept multiple patterns
doc: add documentation for OPT_STRING_LIST
Convert the remaining uses of unsigned char [20] to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the remaining uses of unsigned char [20] to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert each_loose_object_fn and each_packed_object_fn to take a pointer
to struct object_id. Update the various callbacks. Convert several
40-based constants to use GIT_SHA1_HEXSZ.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are places in the code where we would like to provide a struct
object_id *, yet read the hash directly from the pack. Provide an
nth_packed_object_oid function that is similar to the
nth_packed_object_sha1 function.
In order to avoid a potentially invalid cast, nth_packed_object_oid
provides a variable into which to store the value, which it returns on
success; on error, it returns NULL, as nth_packed_object_sha1 does.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code for reflog entries uses a lot of hard-coded constants,
making it hard to read and modify. Use parse_oid_hex and two temporary
variables to simplify the code and reduce the use of magic constants.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make each_reflog_ent_fn take two struct object_id pointers instead of
two pointers to unsigned char. Convert the various callbacks to use
struct object_id as well. Also, rename fsck_handle_reflog_sha1 to
fsck_handle_reflog_oid.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert various uses of unsigned char [20] to struct object_id. Rename
replace_object_sha1 to replace_object_oid. Finally, specify a constant
in terms of GIT_SHA1_HEXSZ.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few leaf functions in various files that call
resolve_refdup. Convert these functions to use struct object_id
internally to prepare for transitioning resolve_refdup itself.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Additionally convert several uses of the constant 40 into
GIT_SHA1_HEXSZ.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert several functions to use struct object_id, and rename them so
that they no longer refer to SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert most of the code to use struct object_id, including struct
origin_data and struct merge_parents. Convert several instances of
hardcoded numbers into references to GIT_SHA1_HEXSZ.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to converting to struct object_id, write some hardcoded
buffer sizes in terms of GIT_SHA1_RAWSZ.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the functions in this file and struct commit_name to struct
object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert most leaf functions to struct object_id. Change several
hardcoded numbers to uses of parse_oid_hex. In doing so, verify that we
when we want two trees, we have exactly two trees.
Finally, in stdin_diff_commit, avoid accessing the byte after the NUL.
This will be a NUL as well, since the first NUL was a newline we
overwrote. However, with parse_oid_hex, we no longer need to increment
the pointer directly, and can simply increment it as part of our check
for the space character.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Renaming the current branch adds an event to the current branch's log
and to HEAD's log. However, the logged entries differ. The entry in
the branch's log represents the entire renaming operation (the old and
new hash are identical), whereas the entry in HEAD's log represents
the deletion only (the new sha1 is null).
Extend replace_each_worktree_head_symref(), whose only caller is
branch_rename(), to take a reflog message argument. This allows the
creation of the new ref to be recorded in HEAD's log. As a result,
the renaming event is represented by two entries (a deletion and a
creation entry) in HEAD's log.
It's a bit unfortunate that the branch's log and HEAD's log now
represent the renaming event in different ways. Given that the
renaming operation is not atomic, the two-entry form is a more
accurate representation of the operation and is more useful for
debugging purposes if a failure occurs between the deletion and
creation events. It would make sense to move the branch's log to the
two-entry form, but this would involve changes to how the rename is
carried out and to how the update flags and reflogs are processed for
deletions, so it may not be worth the effort.
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the current branch is renamed, the deletion of the old ref is
recorded in HEAD's log with an empty message. Now that delete_ref()
accepts a reflog message, provide a more descriptive message by
passing along the log message that is given to rename_ref().
The next step will be to extend HEAD's log to also include the second
part of the rename, the creation of the new branch.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that delete_ref() accepts a reflog message, pass the user-provided
message to delete_ref() rather than silently dropping it.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the current branch is renamed with 'git branch -m/-M' or deleted
with 'git update-ref -m<msg> -d', the event is recorded in HEAD's log
with an empty message. In preparation for adding a more meaningful
message to HEAD's log in these cases, update delete_ref() to take a
message argument and pass it along to ref_transaction_delete().
Modify all callers to pass NULL for the new message argument; no
change in behavior is intended.
Note that this is relevant for HEAD's log but not for the deleted
ref's log, which is currently deleted along with the ref. Even if it
were not, an entry for the deletion wouldn't be present in the deleted
ref's log. files_transaction_commit() writes to the log if
REF_NEEDS_COMMIT or REF_LOG_ONLY are set, but lock_ref_for_update()
doesn't set REF_NEEDS_COMMIT for the deleted ref because REF_DELETING
is set. In contrast, the update for HEAD has REF_LOG_ONLY set by
split_head_update(), resulting in the deletion being logged.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a function, parse_oid_hex, which parses a hexadecimal object
ID and if successful, sets a pointer to just beyond the last character.
This allows for simpler, more robust parsing without needing to
hard-code integer values throughout the codebase.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the internal stash_create function to use a -m flag for
specifying the message and -u flag to indicate whether untracked files
should be added to the stash.
This makes it easier to pass a pathspec argument to stash_create in the
next patch.
The user interface for git stash create stays the same.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently there is no test showing the expected behaviour of git stash
create's command line arguments. Add a test for that to show the
current expected behaviour and to make sure future refactorings don't
break those expectations.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new git stash push verb in addition to git stash save. The
push verb is used to transition from the current command line arguments
to a more conventional way, in which the message is given as an argument
to the -m option.
This allows us to have pathspecs at the end of the command line
arguments like other Git commands do, so that the user can say which
subset of paths to stash (and leave others behind).
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to making git_path() aware of certain file names that need
to be handled differently e.g. when running in worktrees, the commit
557bd833bb (git_path(): be aware of file relocation in $GIT_DIR,
2014-11-30) also snuck in a new option for `git rev-parse`:
`--git-path`.
On the face of it, there is no obvious bug in that commit's diff: it
faithfully calls git_path() on the argument and prints it out, i.e. `git
rev-parse --git-path <filename>` has the same precise behavior as
calling `git_path("<filename>")` in C.
The problem lies deeper, much deeper. In hindsight (which is always
unfair), implementing the .git/ directory discovery in
`setup_git_directory()` by changing the working directory may have
allowed us to avoid passing around a struct that contains information
about the current repository, but it bought us many, many problems.
In this case, when being called in a subdirectory, `git rev-parse`
changes the working directory to the top-level directory before calling
`git_path()`. In the new working directory, the result is correct. But
in the working directory of the calling script, it is incorrect.
Example: when calling `git rev-parse --git-path HEAD` in, say, the
Documentation/ subdirectory of Git's own source code, the string
`.git/HEAD` is printed.
Side note: that bug is hidden when running in a subdirectory of a
worktree that was added by the `git worktree` command: in that case, the
(correct) absolute path of the `HEAD` file is printed.
In the interest of time, this patch does not go the "correct" route to
introduce a struct with repository information (and removing global
state in the process), instead this patch chooses to detect when the
command was called in a subdirectory and forces the result to be an
absolute path.
While at it, we are also fixing the output of --git-common-dir and
--shared-index-path.
Lastly, please note that we reuse the same strbuf for all of the
relative_path() calls; this avoids frequent allocation (and duplicated
code), and it does not risk memory leaks, for two reasons: 1) the
cmd_rev_parse() function does not return anywhere between the use of
the new strbuf instance and its final release, and 2) git-rev-parse is
one of these "one-shot" programs in Git, i.e. it exits after running
for a very short time, meaning that all allocated memory is released
with the exit() call anyway.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t2027-worktree-list has an incorrect expectation for --git-common-dir
which has been adjusted and marked to expect failure.
Some of the tests added have been marked to expect failure. These
demonstrate a problem with the way that some options to git rev-parse
behave when executed from a subdirectory of the main worktree.
[jes: fixed incorrect assumption that objects/ lives in the
worktree-specific git-dir (it lives in the common dir instead). Also
adjusted t1700 so that the test case does not *need* to be the last
one in that script.]
Signed-off-by: Michael Rappazzo <rappazzo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All these warning() calls are preceded by a system call. Report the
actual error to help the user understand why we fail to remove
something.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to call read_ref_full() or resolve_gitlink_ref() from
read_loose_refs(), because we already have a ref_store object in hand.
So we can call resolve_ref_recursively() ourselves. Happily, this
unifies the code for the submodule vs. non-submodule cases.
This requires resolve_ref_recursively() to be exposed to the refs
subsystem, though not to non-refs code.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Those two options are specifying the default values that
__gitcomp_nl() would use anyway when invoked with no options at all.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent commit 1cd23e9e0 (completion: don't use __gitdir() for git
commands, 2017-02-03) rewrapped a couple of long lines, and while
doing so it inadvertently removed a '\' from the end of a line, thus
breaking completion for 'git config remote.name.push <TAB>'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach preload-index to avoid lstat() calls for index-entries
with skip-worktree bit set. This is a performance optimization.
During a sparse-checkout, the skip-worktree bit is set on items
that were not populated and therefore are not present in the
worktree. The per-thread preload-index loop performs a series
of tests on each index-entry as it attempts to compare the
worktree version with the index and mark them up-to-date.
This patch short-cuts that work.
On a Windows 10 system with a very large repo (450MB index)
and various levels of sparseness, performance was improved
in the {preloadindex=true, fscache=false} case by 80% and
in the {preloadindex=true, fscache=true} case by 20% for various
commands.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
dd33e07766 ("connect: Add the envvar GIT_SSH_VARIANT and ssh.variant
config", 2017-02-01) attempted to add support for configuration and
environment variable to override the different handling of
port_option and needs_batch settings suitable for variants of the
ssh implementation that was autodetected by looking at the ssh
command name. Because it piggybacked on the code that turns command
name to specific override (e.g. "plink.exe" and "plink" means
port_option needs to be set to 'P' instead of the default 'p'), yet
it defined a separate namespace for these overrides (e.g. "putty"
can be usable to signal that port_option needs to be 'P'), however,
it made the auto-detection based on the command name less robust
(e.g. the code now accepts "putty" as a SSH command name and applies
the same override).
Separate the code that interprets the override that was read from
the configuration & environment from the original code that handles
the command names, as they are in separate namespaces, to fix this
confusion.
This incidentally also makes it easier for future enhancement of the
override syntax (e.g. "port_option=p,needs_batch=1" may want to be
accepted as a more explicit syntax) without affecting the code for
auto-detection based on the command name.
While at it, update the return type of the handle_ssh_variant()
helper function to void; the caller does not use it, and the
function does not return any meaningful value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of erroring out and telling the user that they should add a
positive pattern that covers everything else, just _do_ that.
For commands where we honor the current cwd by default (ie grep, ls-files
etc), we make that default positive pathspec be the current working
directory. And for commands that default to the whole project (ie diff,
log, etc), the default positive pathspec is the whole project.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The choice of '!' for a negative pathspec ends up not only not matching
what we do for revisions, it's also a horrible character for shell
expansion since it needs quoting.
So add '^' as an alternative alias for an excluding pathspec entry.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old practice of storing the empty string in this member for the main
repository was a holdover from before 00eebe3 (refs: create a base class
"ref_store" for files_ref_store, 2016-09-04), when the submodule was
stored in a flex array at the end of `struct files_ref_store`. Storing
NULL for this case is more idiomatic and a tiny bit less code.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is another step towards weakening the 1:1 relationship between
ref_stores and submodules.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Push the submodule attribute down from ref_store to files_ref_store.
This is another step towards loosening the 1:1 connection between
ref_stores and submodules.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aside from scaling better, this means that the submodule name needn't be
stored in the ref_store instance anymore (which will be changed in a
moment). This, in turn, will help loosen the strict 1:1 relationship
between ref_stores and submodules.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the responsibility for registering the ref_store for a submodule
from base_ref_store_init() to a new function, register_ref_store(). Call
the latter from ref_store_init().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only external entry point to the ref_store lookup functions is
get_ref_store(), which ensures that submodule == "" is passed along as
NULL. So ref_store_init() and lookup_ref_store() don't have to handle
submodule being specified as the empty string.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following functions currently don't need to be exposed:
* ref_store_init()
* lookup_ref_store()
That might change in the future, but for now make them private.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This avoids the need to add forward declarations in the next step.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the sequencer learned to process a "normal" interactive rebase,
we use it. The original shell script is still used for "non-normal"
interactive rebases, i.e. when --root or --preserve-merges was passed.
Please note that the --root option (via the $squash_onto variable) needs
special handling only for the very first command, hence it is still okay
to use the helper upon continue/skip.
Also please note that the --no-ff setting is volatile, i.e. when the
interactive rebase is interrupted at any stage, there is no record of
it. Therefore, we have to pass it from the shell script to the
rebase--helper.
Note: the test t3404 had to be adjusted because the the error messages
produced by the sequencer comply with our current convention to start with
a lower-case letter.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's interactive rebase is still implemented as a shell script, despite
its complexity. This implies that it suffers from the portability point
of view, from lack of expressibility, and of course also from
performance. The latter issue is particularly serious on Windows, where
we pay a hefty price for relying so much on POSIX.
Unfortunately, being such a huge shell script also means that we missed
the train when it would have been relatively easy to port it to C, and
instead piled feature upon feature onto that poor script that originally
never intended to be more than a slightly pimped cherry-pick in a loop.
To open the road toward better performance (in addition to all the other
benefits of C over shell scripts), let's just start *somewhere*.
The approach taken here is to add a builtin helper that at first intends
to take care of the parts of the interactive rebase that are most
affected by the performance penalties mentioned above.
In particular, after we spent all those efforts on preparing the sequencer
to process rebase -i's git-rebase-todo scripts, we implement the `git
rebase -i --continue` functionality as a new builtin, git-rebase--helper.
Once that is in place, we can work gradually on tackling the rest of the
technical debt.
Note that the rebase--helper needs to learn about the transient
--ff/--no-ff options of git-rebase, as the corresponding flag is not
persisted to, and re-read from, the state directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When tags are created with `--create-reflog` or with the option
`core.logAllRefUpdates` set to 'always', a reflog is created for them.
So far, the description of reflog entries for tags was empty, making the
reflog hard to understand. For example:
6e3a7b3 refs/tags/test@{0}:
Now, a reflog message is generated when creating a tag, following the
pattern "tag: tagging <short-sha1> (<description>)". If
GIT_REFLOG_ACTION is set, the message becomes "$GIT_REFLOG_ACTION
(<description>)" instead. If the tag references a commit object, the
description is set to the subject line of the commit, followed by its
commit date. For example:
6e3a7b3 refs/tags/test@{0}: tag: tagging 6e3a7b3398 (Git 2.12-rc0, 2017-02-03)
If the tag points to a tree/blob/tag objects, the following static
strings are taken as description:
- "tree object"
- "blob object"
- "other tag object"
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We de-duplicate ".have" refs among themselves, but never
check if they are duplicates of our local refs. It's not
unreasonable that they would be if we are a "--shared" or
"--reference" clone of a similar repository; we'd have all
the same tags.
We can handle this by inserting our local refs into the
oidset, but obviously not suppressing duplicates (since the
refnames are important).
Note that this also switches the order in which we advertise
refs, processing ours first and then any alternates. The
order shouldn't matter (and arguably showing our refs first
makes more sense).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Namely, de-duplicate them. We use the same set as the
alternates, since we call them both ".have" (i.e., there is
no value in showing one versus the other).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment claims that we handle alternate ".have" lines
through this function, but that hasn't been the case since
85f251045 (write_head_info(): handle "extra refs" locally,
2012-01-06).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have an alternate object store with a very large
number of refs, the peak memory usage of the sha1_array can
grow high, even if most of them are duplicates that end up
not being printed at all.
The similar for_each_alternate_ref() code-paths in
fetch-pack solve this by using flags in "struct object" to
de-duplicate (and so are relying on obj_hash at the core).
But we don't have a "struct object" at all in this case. We
could call lookup_unknown_object() to get one, but if our
goal is reducing memory footprint, it's not great:
- an unknown object is as large as the largest object type
(a commit), which is bigger than an oidset entry
- we can free the memory after our ref advertisement, but
"struct object" entries persist forever (and the
receive-pack may hang around for a long time, as the
bottleneck is often client upload bandwidth).
So let's use an oidset. Note that unlike a sha1-array it
doesn't sort the output as a side effect. However, our
output is at least stable, because for_each_alternate_ref()
will give us the sha1s in ref-sorted order.
In one particularly pathological case with an alternate that
has 60,000 unique refs out of 80 million total, this reduced
the peak heap usage of "git receive-pack . </dev/null" from
13GB to 14MB.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is similar to many of our uses of sha1-array, but it
overcomes one limitation of a sha1-array: when you are
de-duplicating a large input with relatively few unique
entries, sha1-array uses 20 bytes per non-unique entry.
Whereas this set will use memory linear in the number of
unique entries (albeit a few more than 20 bytes due to
hashmap overhead).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We may run for_each_alternate_ref() twice, once in
find_common() and once in everything_local(). This operation
can be expensive, because it involves running a sub-process
which must freshly load all of the alternate's refs from
disk.
Let's cache and reuse the results between the two calls. We
can make some optimizations based on the particular use
pattern in fetch-pack to keep our memory usage down.
The first is that we only care about the sha1s, not the refs
themselves. So it's OK to store only the sha1s, and to
suppress duplicates. The natural fit would therefore be a
sha1_array.
However, sha1_array's de-duplication happens only after it
has read and sorted all entries. It still stores each
duplicate. For an alternate with a large number of refs
pointing to the same commits, this is a needless expense.
Instead, we'd prefer to eliminate duplicates before putting
them in the cache, which implies using a hash. We can
further note that fetch-pack will call parse_object() on
each alternate sha1. We can therefore keep our cache as a
set of pointers to "struct object". That gives us a place to
put our "already seen" bit with an optimized hash lookup.
And as a bonus, the object stores the sha1 for us, so
pointer-to-object is all we need.
There are two extra optimizations I didn't do here:
- we actually store an array of pointer-to-object.
Technically we could just walk the obj_hash table
looking for entries with the ALTERNATE flag set (because
our use case doesn't care about the order here).
But that hash table may be mostly composed of
non-ALTERNATE entries, so we'd waste time walking over
them. So it would be a slight win in memory use, but a
loss in CPU.
- the items we pull out of the cache are actual "struct
object"s, but then we feed "obj->sha1" to our
sub-functions, which promptly call parse_object().
This second parse is cheap, because it starts with
lookup_object() and will bail immediately when it sees
we've already parsed the object. We could save the extra
hash lookup, but it would involve refactoring the
functions we call. It may or may not be worth the
trouble.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current method for getting the refs from an alternate is
to run upload-pack in the alternate and parse its output
using the normal transport code. This works and is
reasonably short, but it has a very bad memory footprint
when there are a lot of refs in the alternate. There are two
problems:
1. It reads in all of the refs before passing any back to
us. Which means that our peak memory usage has to store
every ref (including duplicates for peeled variants),
even if our callback could determine that some are not
interesting (e.g., because they point to the same sha1
as another ref).
2. It allocates a "struct ref" for each one. Among other
things, this contains 3 separate 20-byte oids, along
with the name and various pointers. That can add up,
especially if the callback is only interested in the
sha1 (which it can store in a sha1_array as just 20
bytes).
On a particularly pathological case, where the alternate had
over 80 million refs pointing to only around 60,000 unique
objects, the peak heap usage of "git clone --reference" grew
to over 25GB.
This patch instead calls git-for-each-ref in the alternate
repository, and passes each line to the callback as we read
it. That drops the peak heap of the same command to 50MB.
I considered and rejected a few alternatives.
We could read all of the refs in the alternate using our own
ref code, just as we do with submodules. However, as memory
footprint is one of the concerns here, we want to avoid
loading those refs into our own memory as a whole.
It's possible that this will be a better technique in the
future when the ref code can more easily iterate without
loading all of packed-refs into memory.
Another option is to keep calling upload-pack, and just
parse its output ourselves in a streaming fashion. Besides
for-each-ref being simpler (we get to define the format
ourselves, and don't have to deal with speaking the git
protocol), it's more flexible for possible future changes.
For instance, it might be useful for the caller to be able
to limit the set of "interesting" alternate refs. The
motivating example is one where many "forks" of a particular
repository share object storage, and the shared storage has
refs for each fork (which is why so many of the refs are
duplicates; each fork has the same tags). A plausible
future optimization would be to ask for the alternate refs
for just _one_ fork (if you had some out-of-band way of
knowing which was the most interesting or important for the
current operation).
Similarly, no callbacks actually care about the symref value
of alternate refs, and as before, this patch ignores them
entirely. However, if we wanted to add them, for-each-ref's
"%(symref)" is going to be more flexible than upload-pack,
because the latter only handles the HEAD symref due to
historical constraints.
There is one potential downside, though: unlike upload-pack,
our for-each-ref command doesn't report the peeled value of
refs. The existing code calls the alternate_ref_fn callback
twice for tags: once for the tag, and once for the peeled
value with the refname set to "ref^{}".
For the callers in fetch-pack, this doesn't matter at all.
We immediately peel each tag down to a commit either way (so
there's a slight improvement, as do not bother passing the
redundant data over the pipe). For the caller in
receive-pack, it means we will not advertise the peeled
values of tags in our alternate. However, we also don't
advertise peeled values for our _own_ tags, so this is
actually making things more consistent.
It's unclear whether receive-pack advertising peeled values
is a win or not. On one hand, giving more information to the
other side may let it omit some objects from the push. On
the other hand, for tags which both sides have, they simply
bloat the advertisement. The upload-pack advertisement of
git.git is about 30% larger than the receive-pack
advertisement due to its peeled information.
This patch omits the peeled information from
for_each_alternate_ref entirely, and leaves it up to the
caller whether they want to dig up the information.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Breaking down the fields in the interface makes it easier to
change the backend of for_each_alternate_ref to something
that doesn't use "struct ref" internally.
The only field that callers actually look at is the oid,
anyway. The refname is kept in the interface as a plausible
thing for future code to want.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a string with ".../objects" pointing to the
alternate object store, and overwrite bits of it to look at
other paths in the (potential) git repository holding it.
This works because the only path we care about is "refs",
which is shorter than "objects".
Using a strbuf to hold the path lets us get rid of some
magic numbers, and makes it more obvious that the memory
operations are safe.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The real_pathdup() function will have removed extra slashes
for us already (on top of the normalize_path() done when we
created the alternate_object_database struct in the first
place).
Incidentally, this also fixes the case where the path is
just "/", which would read off the start of the array.
That doesn't seem possible to trigger in practice, though,
as link_alt_odb_entry() blindly eats trailing slashes,
including a bare "/".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In older versions of git, if real_path() failed to resolve
the alternate object store path, we would die() with an
error. However, since 4ac9006f8 (real_path: have callers use
real_pathdup and strbuf_realpath, 2016-12-12) we use the
real_pathdup() function, which may return NULL. Since we
don't check the return value, we can segfault.
This is hard to trigger in practice, since we check that the
path is accessible before creating the alternate_object_database
struct. But it could be removed racily, or we could see a
transient filesystem error.
We could restore the original behavior by switching back to
xstrdup(real_path()). However, dying is probably not the
best option here. This whole function is best-effort
already; there might not even be a repository around the
shared objects at all. And if the alternate store has gone
away, there are no objects to show.
So let's just quietly return, as we would if we failed to
open "refs/", or if upload-pack failed to start, etc.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We forgot that "strip" was introduced at 0571979bd6 ("tag: do not
show ambiguous tag names as "tags/foo"", 2016-01-25) as part of Git
2.8 (and 2.7.1) when we started calling this "lstrip" to make it
easier to explain the new "rstrip" operation.
We shouldn't have renamed the existing one; "lstrip" should have
been a new synonym that means the same thing as "strip". Scripts
in the wild are surely using the original form already.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the previous changes in this series there are only a handful of
$(__gitdir) command substitutions left in the completion script, but
there is still a bit of room for improvements:
1. The command substitution involves the forking of a subshell,
which has considerable overhead on some platforms.
2. There are a few cases, where this command substitution is
executed more than once during a single completion, which means
multiple subshells and possibly multiple 'git rev-parse'
executions. __gitdir() is invoked twice while completing refs
for e.g. 'git log', 'git rebase', 'gitk', or while completing
remote refs for 'git fetch' or 'git push'.
Both of these points can be addressed by using the
__git_find_repo_path() helper function introduced in the previous
commit:
1. __git_find_repo_path() stores the path to the repository in a
variable instead of printing it, so the command substitution
around the function can be avoided. Or rather: the command
substitution should be avoided to make the new value of the
variable set inside the function visible to the callers.
(Yes, there is now a command substitution inside
__git_find_repo_path() around each 'git rev-parse', but that's
executed only if necessary, and only once per completion, see
point 2. below.)
2. $__git_repo_path, the variable holding the path to the
repository, is declared local in the toplevel completion
functions __git_main() and __gitk_main(). Thus, once set, the
path is visible in all completion functions, including all
subsequent calls to __git_find_repo_path(), meaning that they
wouldn't have to re-discover the path to the repository.
So call __git_find_repo_path() and use $__git_repo_path instead of the
$(__gitdir) command substitution to access paths in the .git
directory. Turn tests checking __gitdir()'s repository discovery into
tests of __git_find_repo_path() such that only the tested function
changes but the expected results don't, ensuring that repo discovery
keeps working as it did before.
As __gitdir() is not used anymore in the completion script, mark it as
deprecated and direct users' attention to __git_find_repo_path() and
$__git_repo_path. Yet keep four __gitdir() tests to ensure that it
handles success and failure of __git_find_repo_path() and that it
still handles its optional remote argument, because users' custom
completion scriptlets might depend on it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To prepare for caching the path to the repository in the following
commit, extract the repository discovering part of __gitdir() into the
__git_find_repo_path() helper function, which stores the found path in
the $__git_repo_path variable instead of printing it. Make __gitdir()
a wrapper around this new function. Declare $__git_repo_path local in
the toplevel completion functions __git_main() and __gitk_main() to
ensure that it never leaks into the environment and influences
subsequent completions (though this isn't necessary right now, as
__gitdir() is still only executed in subshells, but will matter for
the following commit).
Adjust tests checking __gitdir() or any other completion function
calling __gitdir() to perform those checks in a subshell to prevent
$__git_repo_path from leaking into the test environment. Otherwise
leave the tests unchanged to demonstrate that this change doesn't
alter __gitdir()'s behavior.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Three completion functions, namely __git_index_files(), __git_heads()
and __git_tags(), first run __gitdir() and check that the path it
outputs exists, i.e. that there is a git repository, and run a git
command only if there is one.
After the previous changes in this series there are no further uses of
__gitdir()'s output in these functions besides those checks. And
those checks are unnecessary, because we can just execute those git
commands outside of a repository and let them error out. We don't
perform such a check in other places either.
Remove this check and the __gitdir() call from these functions,
sparing the fork()+exec() overhead of the command substitution and the
potential 'git rev-parse' execution.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Outputting error messages during completion is bad: they disrupt the
command line, can't be deleted, and the user is forced to Ctrl-C and
start over most of the time. We already silence stderr of many git
commands in our Bash completion script, but there are still some in
there that can spew error messages when something goes wrong.
We could add the missing stderr redirections to all the remaining
places, but instead let's leverage that git commands are now executed
through the previously introduced __git() wrapper function, and
redirect standard error to /dev/null only in that function. This way
we need only one redirection to take care of errors from almost all
git commands. Redirecting standard error of the __git() wrapper
function thus became redundant, remove them.
The exceptions, i.e. the repo-independent git executions and those in
the __gitdir() function that don't go through __git() already have
their standard error silenced.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several completion functions contain the following pattern to run git
commands respecting the path to the repository specified on the
command line:
git --git-dir="$(__gitdir)" <cmd> <options>
This imposes the overhead of fork()ing a subshell for the command
substitution and potentially fork()+exec()ing 'git rev-parse' inside
__gitdir().
Now, if neither '--gitdir=<path>' nor '-C <path>' options are
specified on the command line, then those git commands are perfectly
capable to discover the repository on their own. If either one or
both of those options are specified on the command line, then, again,
the git commands could discover the repository, if we pass them all of
those options from the command line.
This means we don't have to run __gitdir() at all for git commands and
can spare its fork()+exec() overhead.
Use Bash parameter expansions to check the $__git_dir variable and
$__git_C_args array and to assemble the appropriate '--git-dir=<path>'
and '-C <path>' options if either one or both are present on the
command line. These parameter expansions are, however, rather long,
so instead of changing all git executions and make already long lines
even longer, encapsulate running git with '--git-dir=<path> -C <path>'
options into the new __git() wrapper function. Furthermore, this
wrapper function will also enable us to silence error messages from
git commands uniformly in one place in a later commit.
There's one tricky case, though: in __git_refs() local refs are listed
with 'git for-each-ref', where "local" is not necessarily the
repository we are currently in, but it might mean a remote repository
in the filesystem (e.g. listing refs for 'git fetch /some/other/repo
<TAB>'). Use one-shot variable assignment to override $__git_dir with
the path of the repository where the refs should come from. Although
one-shot variable assignments in front of shell functions are to be
avoided in our scripts in general, in the Bash completion script we
can do that safely.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git -C <path>' option(s) on the command line should be taken into
account during completion, because
- like '--git-dir=<path>', it can lead us to a different repository,
- a few git commands executed in the completion script do care about
in which directory they are executed, and
- the command for which we are providing completion might care about
in which directory it will be executed.
However, unlike '--git-dir=<path>', the '-C <path>' option can be
specified multiple times and their effect is cumulative, so we can't
just store a single '<path>' in a variable. Nor can we simply
concatenate a path from '-C <path1> -C <path2> ...', because e.g. (in
an arguably pathological corner case) a relative path might be
followed by an absolute path.
Instead, store all '-C <path>' options word by word in the
$__git_C_args array in the main git completion function, and pass this
array, if present, to 'git rev-parse --absolute-git-dir' when
discovering the repository in __gitdir(), and let it take care of
multiple options, relative paths, absolute paths and everything.
Also pass all '-C <path> options via the $__git_C_args array to those
git executions which require a worktree and for which it matters from
which directory they are executed from. There are only three such
cases:
- 'git diff-index' and 'git ls-files' in __git_ls_files_helper()
used for git-aware filename completion, and
- the 'git ls-tree' used for completing the 'ref:path' notation.
The other git commands executed in the completion script don't need
these '-C <path>' options, because __gitdir() already took those
options into account. It would not hurt them, either, but let's not
induce unnecessary code churn.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of 'git rev-parse --git-dir' can be either a relative or an
absolute path, depending on whether the current working directory is
at the top of the worktree or the .git directory or not, or how the
path to the repository is specified via the '--git-dir=<path>' option
or the $GIT_DIR environment variable. And if that output is a
relative path, then it is relative to the directory where any 'git
-C <path>' options might have led us.
This doesn't matter at all for regular scripts, because the git
wrapper automatically takes care of changing directories according to
the '-C <path>' options, and the scripts can then simply follow any
path returned by 'git rev-parse --git-dir', even if it's a relative
path.
Our Bash completion script, however, is unique in that it must run
directly in the user's interactive shell environment. This means that
it's not executed through the git wrapper and would have to take care
of any '-C <path> options on its own, and it can't just change
directories as it pleases. Consequently, adding support for taking
any '-C <path>' options on the command line into account during
completion turned out to be considerably more difficult, error prone
and required more subshells and git processes when it had to cope with
a relative path to the .git directory.
Help this rather special use case and teach 'git rev-parse' a new
'--absolute-git-dir' option which always outputs a canonicalized
absolute path to the .git directory, regardless of whether the path is
discovered automatically or is specified via $GIT_DIR or 'git
--git-dir=<path>'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main completion function finds the name of the git command by
iterating through all the words on the command line in search for the
first non-option-looking word. As it is not aware of 'git -C's
mandatory path argument, if the '-C <path>' option is present, 'path'
will be the first such word and it will be mistaken for a git command.
This breaks completion in various ways:
- If 'path' happens to match one of the commands supported by the
completion script, then options of that command will be offered.
- If 'path' doesn't match a supported command and doesn't contain any
characters not allowed in Bash identifier names, then the
completion script does basically nothing and Bash in turn falls
back to filename completion for all subsequent words.
- Otherwise, if 'path' does contain such an unallowed character, then
it leads to a more or less ugly error message in the middle of the
command line. The standard '/' directory separator is such a
character, and it happens to trigger one of the uglier errors:
$ git -C some/path <TAB>sh.exe": declare: `_git_some/path': not a valid identifier
error: invalid key: alias.some/path
Fix this by skipping 'git -C's mandatory path argument while iterating
over the words on the command line. Extend the relevant test with
this case and, while at it, with cases that needed similar treatment
in the past ('--git-dir', '-c', '--work-tree' and '--namespace').
Additionally, silence the standard error of the 'declare' builtins
looking for the completion function associated with the git command
and of the 'git config' query for the aliased command. So if git ever
learns a new option with a mandatory argument in the future, then,
though the completion script will again misbehave, at least the
command line will not be utterly disrupted by those error messages.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main git options '--git-dir', '-c', '-C', '--worktree' and
'--namespace' require an argument, but attempting completion right
after them lists git commands.
Don't offer anything right after these options, thus let Bash fall
back to filename completion, because
- the three options '--git-dir', '-C' and '--worktree' do actually
require a path argument, and
- we don't complete the required argument of '-c' and '--namespace',
and in that case the "standard" behavior of our completion script
is to not offer anything, but fall back to filename completion.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e832f5c096 (completion: avoid ls-remote in certain scenarios,
2013-05-28) turned a 'git ls-remote <remote>' query into a 'git
for-each-ref refs/remotes/<remote>/' to improve responsiveness of
remote refs completion by avoiding potential network communication.
However, it inadvertently made impossible to complete short refs from
a remote given as a URL, e.g. 'git fetch git://server.com/repo.git
<TAB>', because there is, of course, no such thing as
'refs/remotes/git://server.com/repo.git'.
Since the previous commit we tell apart configured remotes, i.e. those
that can have a hierarchy under 'refs/remotes/', from others that
don't, including remotes given as URL, so we know when we can't use
the faster 'git for-each-ref'-based approach.
Resurrect the old, pre-e832f5c09680 'git ls-remote'-based code for the
latter case to support listing short refs from remotes given as a URL.
The code is slightly updated from the original to
- take into account the path to the repository given on the command
line (if any), and
- omit 'ORIG_HEAD' from the query, as 'git ls-remote' will never
list it anyway.
When the remote given to __git_refs() doesn't exist, then it will be
handled by this resurrected 'git ls-remote' query. This code path
doesn't list 'HEAD' unconditionally, which has the nice side effect of
fixing two more expected test failures.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When refs completion is attempted while not in a git repository, the
completion script offers 'HEAD' erroneously.
Check early in __git_refs() that there is either a repository or a
remote to work on, and return early if neither is given.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the remote given to __git_refs() happens to match both the name of
a configured remote and the name of a directory in the current working
directory, then that directory is assumed to be a git repository, and
listing refs from that directory will be attempted. This is wrong,
because in such a situation git commands (e.g. 'git fetch|pull|push
<remote>' whom these refs will eventually be passed to) give
precedence to the configured remote. Therefore, __git_refs() should
list refs from the configured remote as well.
Add the helper function __git_is_configured_remote() that checks
whether its argument matches the name of a configured remote. Use
this helper to decide how to handle the remote passed to __git_refs().
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In __git_refs() the git commands listing refs, both short and full,
from a given remote repository are run without giving them the path to
the git repository which might have been specified on the command line
via 'git --git-dir=<path>'. This is bad, those git commands should
access the 'refs/remotes/<remote>/' hierarchy or the remote and
credentials configuration in that specified repository.
Use the __gitdir() helper only to find the path to the .git directory
and pass the resulting path to the 'git ls-remote' and 'for-each-ref'
executions that list remote refs. While modifying that 'for-each-ref'
line, remove the superfluous disambiguating doubledash.
Don't use __gitdir() to check that the given remote is on the file
system: basically it performs only a single if statement for us at the
considerable cost of fork()ing a subshell for a command substitution.
We are better off to perform all the necessary checks of the remote in
__git_refs().
Though __git_refs() was the last remaining callsite that passed a
remote to __gitdir(), don't delete __gitdir()'s remote-handling part
yet, just in case some users' custom completion scriptlets depend on
it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The completion script already respects the path to the repository
specified on the command line most of the time, here we add the
necessary '--git-dir=$(__gitdir)' options to most of the places where
git was executed without it. The exceptions where said option is not
added are the git invocations:
- in __git_refs() which are non-trivial and will be the subject of
the following patch,
- getting the list of git commands, merge strategies and archive
formats, because these are independent from the repository and
thus don't need it, and
- the 'git rev-parse --git-dir' in __gitdir() itself.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __gitdir() helper function prints the path to the git repository
to its stdout or stays silent and returns with error when it can't
find a repository or when the repository given via $GIT_DIR doesn't
exist.
This is not the case, however, when the path in $__git_dir, i.e. the
path to the repository specified on the command line via 'git
--git-dir=<path>', doesn't exist: __gitdir() still outputs it as if it
were a real existing repository, making some completion functions
believe that they operate on an existing repository.
Check that the path in $__git_dir exists and return with error without
printing anything to stdout if it doesn't.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check how __git_refs() lists refs in different scenarios, i.e.
- short and full refs,
- from a local or from a remote repository,
- remote specified via path, name or URL,
- with or without a repository specified on the command line,
- non-existing remote,
- unique remote branches for 'git checkout's tracking DWIMery,
- not in a git repository, and
- interesting combinations of the above.
Seven of these tests expect failure, mostly demonstrating bugs related
to listing refs from a remote repository:
- ignoring the repository specified on the command line (2 tests),
- listing refs from the wrong place when the name of a configured
remote happens to match a directory,
- listing only 'HEAD' but no short refs from a remote given as URL,
- listing 'HEAD' even from non-existing remotes (2 tests), and
- listing 'HEAD' when not in a repository.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __gitdir() helper function shouldn't output anything if not in a
git repository. The relevant tests only checked its error code, so
extend them to ensure that there's no output.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests of the __gitdir() helper function use the $TRASH_DIRECTORY
variable in direct path comparisons. In general this should be
avoided, because it might contain symbolic links. There happens to be
no issues with this here, however, because those tests use
$TRASH_DIRECTORY both for specifying the expected result and for
specifying input which in turn is just 'echo'ed verbatim.
Other __gitdir() tests ask for the path of the trash directory by
running $(pwd -P) in each test, sometimes even twice in a single test.
Run $(pwd) only once at the beginning of the test script to store the
path of the trash directory in a variable, and use that variable in
all __gitdir() tests.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test helper functions test_gitcomp() and test_gitcomp_nl() leak
the $cur variable into the test environment. Since this variable has
a special role in the Bash completion script (it holds the word
currently being completed) it influences the behavior of most
completion functions and thus this leakage could interfere with
subsequent tests. Although there are no such issues in the current
tests, early versions of the new tests that will be added later in
this series suffered because of this.
It's better to play safe and declare $cur local in those test helper
functions. 'local' is bashism, of course, but the tests of the Bash
completion script are run under Bash anyway, and there are already
other variables declared local in this test script.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While preparing commits, three tests added newly created files to the
index using 'git add .', which added not only the files in question
but leftover test cruft from previous tests like the files 'expected'
and 'actual' as well. Luckily, this had no effect on the tests'
correctness.
Add only the files we are actually interested in.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
That "first argument is passed to __gitdir()" statement in particular
is not really helpful, and after this series it won't be the case
anyway.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the 'git_attr_set_direction()' up to be closer to the variables
that it modifies as well as a small formatting by renaming the variable
'new' to 'new_direction' so that it is more descriptive.
Update the comment about how 'direction' is used to read the state of
the world. It should be noted that callers of
'git_attr_set_direction()' should ensure that other threads are not
making calls into the attribute system until after the call to
'git_attr_set_direction()' completes. This function essentially acts as
reset button for the attribute system and should be handled with care.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Push the bare repository check into the 'read_attr()' function. This
avoids needing to have extra logic which creates an empty stack frame
when inside a bare repo as a similar bit of logic already exists in the
'read_attr()' function.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last big hurdle towards a thread-safe API for the attribute system
is the reliance on a global attribute stack that is modified during each
call into the attribute system.
This patch removes this global stack and instead a stack is stored
locally in each attr_check instance. This opens up the opportunity for
future optimizations to customize the attribute stack for the attributes
that a particular attr_check struct is interested in.
One caveat with pushing the attribute stack into the attr_check
structure is that the attribute system now needs to keep track of all
active attr_check instances. Due to the direction mechanism the stack
needs to be dropped when the direction is switched. In order to ensure
correctness when the direction is changed the attribute system needs to
iterate through all active attr_check instances and drop each of their
stacks.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whether or not a git attribute is real or a macro isn't a property of
the attribute but rather it depends on the attribute stack (which
.gitattribute files were read).
This patch removes the 'maybe_real' and 'maybe_macro' fields in a
git_attr and instead adds the 'macro' field to a attr_check_item. The
'macro' indicates (if non-NULL) that a particular attribute is a macro
for the given attribute stack. It's populated, through a quick scan of
the attribute stack, with the match_attr that corresponds to the macro's
definition. This way the attribute stack only needs to be scanned a
single time prior to attribute collection instead of each time a macro
needs to be expanded.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently there is a reliance on 'check_all_attr' which is a global
array of 'attr_check_item' items which is used to store the value of
each attribute during the collection process.
This patch eliminates this global and instead creates an array per
'attr_check' instance which is then used in the attribute collection
process. This brings the attribute system one step closer to being
thread-safe.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current implementation of the attribute dictionary uses a custom
hashtable. This modernizes the dictionary by converting it to the builtin
'hashmap' structure.
Also, in order to enable a threaded API in the future add an
accompanying mutex which must be acquired prior to accessing the
dictionary of interned attributes.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert 'invalid_attr_name()' to 'attr_name_valid()' and use positive
logic for the return value. In addition create a helper function that
prints out an error message when an invalid attribute name is used.
We could later update the message to exactly spell out what the
rules for a good attribute name are, etc.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old callchain used to take an array of attr_check_item items.
Instead pass the 'attr_check' container object to 'collect_some_attrs()'
and access the fields in the data structure directly.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since nobody uses the old API, make it file-scope static, and update
the documentation to describe the new API.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The remaining callers are all simple "I have N attributes I am
interested in. I'll ask about them with various paths one by one".
After this step, no caller to git_check_attrs() remains. After
removing it, we can extend "struct attr_check" struct with data
that can be used in optimizing the query for the specific N
attributes it contains.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This updates the other two ways the attribute check is done via an
array of "struct attr_check_item" elements. These two niches
appear only in "git check-attr".
* The caller does not know offhand what attributes it wants to ask
about and cannot use attr_check_initl() to prepare the
attr_check structure.
* The caller may not know what attributes it wants to ask at all,
and instead wants to learn everything that the given path has.
Such a caller can call attr_check_alloc() to allocate an empty
attr_check, and then call attr_check_append() to add attribute names
one by one.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common pattern to check N attributes for many paths is to
(1) prepare an array A of N attr_check_item items;
(2) call git_attr() to intern the N attribute names and fill A;
(3) repeatedly call git_check_attrs() for path with N and A;
A look-up for these N attributes for a single path P scans the
entire attr_stack, starting from the .git/info/attributes file and
then .gitattributes file in the directory the path P is in, going
upwards to find .gitattributes file found in parent directories.
An earlier commit 06a604e6 (attr: avoid heavy work when we know the
specified attr is not defined, 2014-12-28) tried to optimize out
this scanning for one trivial special case: when the attribute being
sought is known not to exist, we do not have to scan for it. While
this may be a cheap and effective heuristic, it would not work well
when N is (much) more than 1.
What we would want is a more customized way to skip irrelevant
entries in the attribute stack, and the definition of irrelevance
is tied to the set of attributes passed to git_check_attrs() call,
i.e. the set of attributes being sought. The data necessary for
this optimization needs to live alongside the set of attributes, but
a simple array of git_attr_check_elem simply does not have any place
for that.
Introduce "struct attr_check" that contains N, the number of
attributes being sought, and A, the array that holds N
attr_check_item items, and a function git_check_attr() that
takes a path P and this structure as its parameters. This structure
can later be extended to hold extra data necessary for optimization.
Also, to make it easier to write the first two steps in common
cases, introduce git_attr_check_initl() helper function, which takes
a NULL-terminated list of attribute names and initialize this
structure.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The traditional API to check attributes is to prepare an N-element
array of "struct git_attr_check" and pass N and the array to the
function "git_check_attr()" as arguments.
In preparation to revamp the API to pass a single structure, in
which these N elements are held, rename the type used for these
individual array elements to "struct attr_check_item" and rename
the function to "git_check_attrs()".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are too many repetitious "I have this new attr_stack element;
push it at the top of the stack" sequence. The new helper function
push_stack() gives us a way to express what is going on at these
places, and as a side effect, halves the number of times we mention
the attr_stack global variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Full pattern must be quoted. So 'pat"t"ern attr' will give exactly
'pat"t"ern', not 'pattern'. Also clarify that leading whitespaces are
not part of the pattern and document comment syntax.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If any error is noticed after the match_attr structure is allocated,
we shouldn't just return NULL from this function.
Add a fail_return label that frees the allocated structure and
returns NULL, and consistently jump there when we want to return
NULL after cleaning up.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It holds an interned string, and git_attr_name() is a way to peek
into it. Make sure the involved pointer types are pointer-to-const.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The double-loop wants to do an early return immediately when one
matching macro is found. Eliminate the extra variable 'a' used for
that purpose and rewrite the "assign the found item to 'a' to make
it non-NULL and force the loop(s) to terminate" with a direct return
from there.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 82dce998 (attr: more matching optimizations from .gitignore,
2012-10-15) changed a pointer to a string "*pattern" into an
embedded "struct pattern" in struct match_attr, it forgot to update
the comment that describes the structure.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The URL matching function computes for two URLs whether they match not.
The match is performed by splitting up the URL into different parts and
then doing an exact comparison with the to-be-matched URL.
The main user of `urlmatch` is the configuration subsystem. It allows to
set certain configurations based on the URL which is being connected to
via keys like `http.<url>.*`. A common use case for this is to set
proxies for only some remotes which match the given URL. Unfortunately,
having exact matches for all parts of the URL can become quite tedious
in some setups. Imagine for example a corporate network where there are
dozens or even hundreds of subdomains, which would have to be configured
individually.
Allow users to write an asterisk '*' in place of any 'host' or
'subdomain' label as part of the host name. For example,
"http.https://*.example.com.proxy" sets "http.proxy" for all direct
subdomains of "https://example.com", e.g. "https://foo.example.com", but
not "https://foo.bar.example.com".
Signed-off-by: Patrick Steinhardt <patrick.steinhardt@elego.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to be able to rank positive matches by `urlmatch`, we inspect
the path length and user part to decide whether a match is better than
another match. As all other parts are matched exactly between both URLs,
this is the correct thing to do right now.
In the future, though, we want to introduce wild cards for the domain
part. When doing this, it does not make sense anymore to only compare
the path lengths. Instead, we also want to compare the domain lengths to
determine which of both URLs matches the host part more closely.
Signed-off-by: Patrick Steinhardt <patrick.steinhardt@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This environment variable and configuration value allow to
override the autodetection of plink/tortoiseplink in case that
Git gets it wrong.
[jes: wrapped overly-long lines, factored out and changed
get_ssh_variant() to handle_ssh_variant() to accomodate the
change from the putty/tortoiseplink variables to
port_option/needs_batch, adjusted the documentation, free()d
value obtained from the config.]
Signed-off-by: Segev Finer <segev208@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We handle plink and tortoiseplink as OpenSSH replacements, by passing
the correct command-line options when detecting that they are used.
To let users override that auto-detection (in case Git gets it wrong),
we need to introduce new code to that end.
In preparation for this code, let's factor out the SSH variant handling
into its own function, handle_ssh_variant().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement the '--format' option provided by 'ref-filter'. This lets the
user list branches as per desired format similar to the implementation
in 'git for-each-ref'.
Add tests and documentation for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Port branch.c to use ref-filter APIs for printing. This clears out
most of the code used in branch.c for printing and replaces them with
calls made to the ref-filter library.
Introduce build_format() which gets the format required for printing
of refs. Make amendments to print_ref_list() to reflect these changes.
The strings included in build_format() may not be safely quoted for
inclusion (i.e. it might contain '%' which needs to be escaped with an
additional '%'). Introduce quote_literal_for_format() as a helper
function which takes a string and returns a version of the string that
is safely quoted to be used in the for-each-ref format which is built
in build_format().
Change calc_maxwidth() to also account for the length of HEAD ref, by
calling ref-filter:get_head_discription().
Also change the test in t6040 to reflect the changes.
Before this patch, all cross-prefix symrefs weren't shortened. Since
we're using ref-filter APIs, we shorten all symrefs by default. We also
allow the user to change the format if needed with the introduction of
the '--format' option in the next patch.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call ref-filter's setup_ref_filter_porcelain_msg() to enable
translated messages for the %(upstream:tack) atom. Although branch.c
doesn't currently use ref-filter's printing API's, this will ensure
that when it does in the future patches, we do not need to worry about
translation.
Written-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce setup_ref_filter_porcelain_msg() so that the messages used in
the atom %(upstream:track) can be translated if needed. By default, keep
the messages untranslated, which is the right behavior for plumbing
commands. This is needed as we port branch.c to use ref-filter's
printing API's.
Written-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complimenting the existing 'lstrip=<N>' option, add an 'rstrip=<N>'
option which strips `<N>` slash-separated path components from the end
of the refname (e.g., `%(refname:rstrip=2)` turns `refs/tags/foo` into
`refs`).
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the 'lstrip=<N>' option only takes a positive value '<N>'
and strips '<N>' slash-separated path components from the left. Modify
the 'lstrip' option to also take a negative number '<N>' which would
strip from the left as necessary and _leave_ behind only 'N'
slash-separated path components from the right-most end.
For e.g. %(refname:lstrip=-1) would make 'foo/goo/abc' into 'abc'.
Add documentation and tests for the same.
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `url_info` structure contains information about a normalized URL
with the URL's components being represented by different fields. The
host and port part though are to be accessed by the same `host` field,
so that getting the host and/or port separately becomes more involved
than really necessary.
To make the port more readily accessible, split up the host and port
fields. Namely, the `host_len` will not include the port length anymore
and a new `port_off` field has been added which includes the offset to
the port, if available.
The only user of these fields is `url_normalize_1`. This change makes it
easier later on to treat host and port differently when introducing
globs for domains.
Signed-off-by: Patrick Steinhardt <patrick.steinhardt@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `url_normalize` function is used to validate and normalize URLs. As
such, it does not allow for some special characters to be part of the
URLs that are to be normalized. As we want to allow using globs in some
configuration keys making use of URLs, namely `http.<url>.<key>`, but
still normalize them, we need to somehow enable some additional allowed
characters.
To do this without having to change all callers of `url_normalize`,
where most do not actually want globbing at all, we split off another
function `url_normalize_1`. This function accepts an additional
parameter `allow_globs`, which is subsequently called by `url_normalize`
with `allow_globs=0`.
As of now, this function is not used with globbing enabled. A caller
will be added in the following commit.
Signed-off-by: Patrick Steinhardt <patrick.steinhardt@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current message printed by "git merge-recursive" for a rename/delete
conflict is like this:
CONFLICT (rename/delete): new-path deleted in HEAD and renamed in
other-branch. Version other-branch of new-path left in tree.
To be more helpful, the message should show both paths of the rename and
state that the deletion occurred at the old path, not the new path. So
change the message to the following format:
CONFLICT (rename/delete): old-path deleted in HEAD and renamed to
new-path in other-branch. Version other-branch of new-path left in tree.
Since this doubles the number of cases in handle_change_delete (modify vs.
rename), refactor the code to halve the number of cases again by merging the
cases where o->branch1 has the change and o->branch2 has the delete with the
cases that are the other way around.
Also add a simple test of the new conflict message.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of these two may have originally been named after "what exact
SSH implementation do we have?" so that we can tweak the command
line options for that exact implementation. But "putty=1" no longer
means "We are using the plink SSH implementation that comes with
PuTTY" these days. It is set when we guess that either PuTTY plink
or Tortoiseplink is in use.
Rename them after what effect is desired. The current 'putty'
option is about using "-P <port>" when OpenSSH would use "-p <port>",
so rename it to 'port_option' whose value is either 'p' or 'P". The
other one is about passing an extra command line option "-batch",
so rename it to 'needs_batch'.
[jes: wrapped overly-long line]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git for Windows has special support for the popular SSH client PuTTY:
when using PuTTY's non-interactive version ("plink.exe"), we use the -P
option to specify the port rather than OpenSSH's -p option. TortoiseGit
ships with its own, forked version of plink.exe, that adds support for
the -batch option, and for good measure we special-case that, too.
However, this special-casing of PuTTY only covers the case where the
user overrides the SSH command via the environment variable GIT_SSH
(which allows specifying the name of the executable), not
GIT_SSH_COMMAND (which allows specifying a full command, including
additional command-line options).
When users want to pass any additional arguments to (Tortoise-)Plink,
such as setting a private key, they are required to either use a shell
script named plink or tortoiseplink or duplicate the logic that is
already in Git for passing the correct style of command line arguments,
which can be difficult, error prone and annoying to get right.
This patch simply reuses the existing logic and expands it to cover
GIT_SSH_COMMAND, too.
Note: it may look a little heavy-handed to duplicate the entire
command-line and then split it, only to extract the name of the
executable. However, this is not a performance-critical code path, and
the code is much more readable this way.
Signed-off-by: Segev Finer <segev208@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-describe the `--exclude` option which will allow specifying
a glob pattern of tags to ignore. This can be combined with the
`--match` patterns to enable more flexibility in determining which tags
to consider.
For example, suppose you wish to find the first official release tag
that contains a certain commit. If we assume that official release tags
are of the form "v*" and pre-release candidates include "*rc*" in their
name, we can now find the first release tag that introduces the commit
abcdef:
git describe --contains --match="v*" --exclude="*rc*" abcdef
Add documentation, tests, and completion for this change.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach `--match` to be accepted multiple times, accumulating a list of
patterns to match into a string list. Each pattern is inclusive, such
that a tag need only match one of the provided patterns to be
considered for matching.
This extension is useful as it enables more flexibility in what tags
match, and may avoid the need to run the describe command multiple
times to get the same result.
Add tests and update the documentation for this change.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend git-name-rev to support excluding refs which match shell patterns
using --exclude. These patterns can be used to limit the scope of refs
by excluding any ref that matches one of the --exclude patterns. A ref
will only be used for naming when it matches at least one --refs pattern
but does not match any of the --exclude patterns. Thus, --exclude
patterns are given precedence over --refs patterns.
For example, suppose you wish to name a series of commits based on an
official release tag of the form "v*" but excluding any pre-release tags
which match "*rc*". You can use the following to do so:
git name-rev --refs="v*" --exclude="*rc*" --all
Add tests and update Documentation for this change.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git name-rev to take multiple --refs stored as a string list of
patterns. The list of patterns will be matched inclusively, and each ref
only needs to match one pattern to be included. A ref will only be
excluded if it does not match any of the given patterns. Additionally,
if any of the patterns would allow abbreviation, then we will abbreviate
the ref, even if another pattern is more strict and would not have
allowed abbreviation on its own.
Add tests and documentation for this change. The tests expected output
is dynamically generated. This is in order to avoid hard-coding
a commit object name in the test results (as the expected output is to
simply leave the commit object unnamed).
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c8ba163916 ("parse-options: add OPT_STRING_LIST helper",
2011-06-09) added the OPT_STRING_LIST as a way to accumulate a repeated
list of strings. However, this was not documented in the
api-parse-options documentation. Add documentation now so that future
developers may learn of its existence.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When adding a new function to the end of a file, it's enough to know
that 1) the addition is at the end of the file; and 2) there is a
function _somewhere_ in there.
If we had simply been changing the end of an existing function, then we
would also be deleting something from the old version.
This fixes the case where we add e.g.
// Begin of dummy
static int dummy(void)
{
}
to the end of the file.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently when we use the 'lstrip=<N>' option, if 'N' is greater than
the number of components available in the refname, we abruptly end
program execution by calling die().
This behavior is undesired since a single refname with few components
could end program execution. To avoid this, return an empty string
whenever the value 'N' is greater than the number of components
available, instead of calling die().
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for the upcoming patch, where we introduce the 'rstrip'
option. Rename the 'strip' option to 'lstrip' to remove ambiguity.
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the recently introduced refname_atom_parser_internal() within
remote_ref_atom_parser(), this provides a common base for all the ref
printing atoms, allowing %(upstream) and %(push) to also use the
':strip' option.
The atoms '%(push)' and '%(upstream)' will retain the ':track' and
':trackshort' atom modifiers to themselves as they have no meaning in
context to the '%(refname)' and '%(symref)' atoms.
Update the documentation and tests to reflect the same.
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using refname_atom_parser_internal(), introduce refname_atom_parser()
which will parse the %(symref) and %(refname) atoms. Store the parsed
information into the 'used_atom' structure based on the modifiers used
along with the atoms.
Now the '%(symref)' atom supports the ':strip' atom modifier. Update the
Documentation and tests to reflect this.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since there are multiple atoms which print refs ('%(refname)',
'%(symref)', '%(push)', '%(upstream)'), it makes sense to have a common
ground for parsing them. This would allow us to share implementations of
the atom modifiers between these atoms.
Introduce refname_atom_parser_internal() to act as a common parsing
function for ref printing atoms. This would eventually be used to
introduce refname_atom_parser() and symref_atom_parser() and also be
internally used in remote_ref_atom_parser().
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "%(symref)" atom doesn't work when used with the ':short' modifier
because we strictly match only 'symref' for setting the 'need_symref'
indicator. Fix this by comparing with the valid_atom rather than the
used_atom.
Add tests for %(symref) and %(symref:short) while we're here.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for %(upstream:track,nobracket) which will print the
tracking information without the brackets (i.e. "ahead N, behind M").
This is needed when we port branch.c to use ref-filter's printing APIs.
Add test and documentation for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Borrowing from branch.c's implementation print "[gone]" whenever an
unknown upstream ref is encountered instead of just ignoring it.
This makes sure that when branch.c is ported over to using ref-filter
APIs for printing, this feature is not lost.
Make changes to t/t6300-for-each-ref.sh and
Documentation/git-for-each-ref.txt to reflect this change.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Helped-by : Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To allow column display, we will need to first render the output in a
string list to allow print_columns() to compute the proper size of
each column before starting the actual output. Introduce the function
format_ref_array_item() that does the formatting of a ref_array_item
to an strbuf.
show_ref_array_item() is kept as a convenience wrapper around it which
obtains the strbuf and prints it the standard output.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the implementation of get_head_description() from branch.c to
ref-filter. This gives a description of the HEAD ref if called. This
is used as the refname for the HEAD ref whenever the
FILTER_REFS_DETACHED_HEAD option is used. Make it public because we
need it to calculate the length of the HEAD refs description in
branch.c:calc_maxwidth() when we port branch.c to use ref-filter
APIs.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for %(objectname:short=<length>) which would print the
abbreviated unique objectname of given length. When no length is
specified, the length is 'DEFAULT_ABBREV'. The minimum length is
'MINIMUM_ABBREV'. The length may be exceeded to ensure that the
provided object name is unique.
Add tests and documentation for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Helped-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement %(if:equals=<string>) wherein the if condition is only
satisfied if the value obtained between the %(if:...) and %(then) atom
is the same as the given '<string>'.
Similarly, implement (if:notequals=<string>) wherein the if condition
is only satisfied if the value obtained between the %(if:...) and
%(then) atom is different from the given '<string>'.
This is done by introducing 'if_atom_parser()' which parses the given
%(if) atom and then stores the data in used_atom which is later passed
on to the used_atom of the %(then) atom, so that it can do the required
comparisons.
Add tests and documentation for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ensure that each 'atom_value' has a reference to its corresponding
'used_atom'. This lets us use values within 'used_atom' in the
'handler' function.
Hence we can get the %(align) atom's parameters directly from the
'used_atom' therefore removing the necessity of passing %(align) atom's
parameters to 'atom_value'.
This also acts as a preparatory patch for the upcoming patch where we
introduce %(if:equals=) and %(if:notequals=).
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement %(if), %(then) and %(else) atoms. Used as
%(if)...%(then)...%(end) or %(if)...%(then)...%(else)...%(end). If the
format string between %(if) and %(then) expands to an empty string, or
to only whitespaces, then the whole %(if)...%(end) expands to the string
following %(then). Otherwise, it expands to the string following
%(else), if any. Nesting of this construct is possible.
This is in preparation for porting over `git branch -l` to use
ref-filter APIs for printing.
Add documentation and tests regarding the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When deleting/pruning references, remove any directories that are made
empty by the deletion of loose references or of reflogs. Otherwise such
empty directories can survive forever and accumulate over time. (Even
'pack-refs', which is smart enough to remove the parent directories of
loose references that it prunes, leaves directories that were already
empty.)
And now that files_transaction_commit() takes care of deleting the
parent directories of loose references that it prunes, we don't have to
do that in prune_ref() anymore.
This change would be unwise if the *creation* of these directories could
race with our deletion of them. But the earlier changes in this patch
series made the creation paths robust against races, so now it is safe
to tidy them up more aggressively.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new "flags" parameter that tells the function whether to remove
empty parent directories of the loose reference file, of the reflog
file, or both. The new functionality is not yet used.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's bad manners and surprising and therefore error-prone.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was hardly doing anything anymore, and had only one caller.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is simpler to derive the path to the file that must be deleted from
"lock->ref_name" than from the lock_file object.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now files_log_ref_write() doesn't do anything beyond call
log_ref_write_1(), so inline the latter into the former.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of writing the name of the reflog file into a strbuf that is
supplied by the caller but not needed there, write it into a local
temporary buffer and remove the strbuf parameter entirely.
And while we're adjusting the function signature, reorder the arguments
to move the input parameters before the output parameters.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's unnecessary to pass a strbuf holding the reflog path up and down
the call stack now that it is hardly needed by the callers. Remove the
places where log_ref_write_1() uses it, in preparation for making it
internal to log_ref_setup().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function will most often be called by log_ref_write_1(), which
wants to append to the reflog file. In that case, it is silly to close
the file only for the caller to reopen it immediately. So, in the case
that the file was opened, pass the open file descriptor back to the
caller.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change log_ref_setup() to use raceproof_create_file() to create the new
logfile. This makes it more robust against a race against another
process that might be trying to clean up empty directories while we are
trying to create a new logfile.
This also means that it will only call create_leading_directories() if
open() fails, which should be a net win. Even in the cases where we are
willing to create a new logfile, it will usually be the case that the
logfile already exists, or if not then that the directory containing the
logfile already exists. In such cases, we will save some work that was
previously done unconditionally.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behavior of this function (especially how it handles errors) is
quite different depending on whether we are willing to create the reflog
vs. whether we are only trying to open an existing reflog. So separate
the code paths.
This also simplifies the next steps.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function doesn't do anything beyond call files_log_ref_write(), so
replace it with the latter at its call sites.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Don't capitalize error strings
* Report true paths of affected files
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Besides shortening the code, this saves an unnecessary call to
safe_create_leading_directories_const() in almost all cases.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of coding the retry loop inline, use raceproof_create_file() to
make lock acquisition safe against directory creation/deletion races.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`lflags` is set a single time then never changed, so just inline it.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function that tries to create a file and any containing
directories in a way that is robust against races with other processes
that might be cleaning up empty directories at the same time.
The actual file creation is done by a callback function, which, if it
fails, should set errno to EISDIR or ENOENT according to the convention
of open(). raceproof_create_file() detects such failures, and
respectively either tries to delete empty directories that might be in
the way of the file or tries to create the containing directories. Then
it retries the callback function.
This function is not yet used.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The exit path for SCLD_EXISTS wasn't setting errno, which some callers
use to generate error messages for the user. Fix the problem and
document that the function sets errno correctly to help avoid similar
regressions in the future.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of looking on the filesystem inside ".git/refs/remotes/origin",
use "git for-each-ref" to check for leftover references under the
remote's old name.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behavior of refname_is_safe() was changed in
e40f355 "refname_is_safe(): insist that the refname already be normalized", 2016-04-27
without a corresponding update to its docstring. The function is in fact
stricter than documented, because it now insists that the result of
normalizing the part of a refname following "refs/" is identical to that
part of the original refname. Fix the docstring.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we default to ".git" without having done any kind of
repository setup, the results quite often do what the user
expects. But this has also historically been the cause of
some poorly behaved corner cases. These cases can be hard to
find, because they happen at the conjunction of two
relatively rare circumstances:
1. We are running some code which assumes there's a
repository present, but there isn't necessarily one
(e.g., low-level diff code triggered by "git diff
--no-index" might try to look at some repository data).
2. We have an unusual setup, like being in a subdirectory
of the working tree, or we have a .git file (rather
than a directory), or we are running a tool like "init"
or "clone" which may operate on a repository in a
different directory.
Our test scripts often cover (1), but miss doing (2) at the
same time, and so the fallback appears to work but has
lurking bugs. We can flush these bugs out by refusing to do
the fallback entirely., This makes potential problems a lot
more obvious by complaining even for "usual" setups.
This passes the test suite (after the adjustments in the
previous patches), but there's a risk of regression for any
cases where the fallback usually works fine but the code
isn't exercised by the test suite. So by itself, this
commit is a potential step backward, but lets us take two
steps forward once we've identified and fixed any such
instances.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
And then if we and our users survived the previous "start warning if
the old syntax is used" patch for a few years, we could apply this
to actually drop the support for the ancient syntax.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-04-29 13:54:40 -07:00
471 changed files with 46535 additions and 26963 deletions
- [[[2]]] http://java.sun.com/docs/codeconv/html/CodeConventions.doc.html#16712['Code Conventions for the Java Programming Language'. Sun Microsystems.]
- [[[6]]] http://lwn.net/Articles/277872/[Jonathan Corbet. 'Bisection divides users and developers'. LWN.net.]
- [[[7]]] http://article.gmane.org/gmane.linux.scsi/36652/[Ingo Molnar. 'Re: BUG 2.6.23-rc3 can't see sd partitions on Alpha'. Gmane.]
- [[[8]]] http://www.kernel.org/pub/software/scm/git/docs/git-bisect.html[Junio C Hamano and the git-list. 'git-bisect(1) Manual Page'. Linux Kernel Archives.]
- [[[6]]] https://lwn.net/Articles/277872/[Jonathan Corbet. 'Bisection divides users and developers'. LWN.net.]
- [[[7]]] http://marc.info/?l=linux-kernel&m=119702753411680&w=2[Ingo Molnar. 'Re: BUG 2.6.23-rc3 can't see sd partitions on Alpha'. Linux-kernel mailing list.]
- [[[8]]] https://www.kernel.org/pub/software/scm/git/docs/git-bisect.html[Junio C Hamano and the git-list. 'git-bisect(1) Manual Page'. Linux Kernel Archives.]
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
