* maint-2.31:
Git 2.31.2
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
* maint-2.30:
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
Dash bug https://bugs.launchpad.net/ubuntu/+source/dash/+bug/139097
lets the shell erroneously perform field splitting on the expansion of a
command substitution during declaration of a local variable. It causes
the parallel-checkout tests to fail e.g. when running them with
/bin/dash on MacOS 11.4, where they error out like this:
./t2080-parallel-checkout-basics.sh: 33: local: 0: bad variable name
That's because the output of wc -l contains leading spaces and the
returned number of lines is treated as another variable to declare, i.e.
as in "local workers= 0".
Work around it by enclosing the command substitution in quotes.
Helped-by: Matheus Tavares Bernardino <matheus.bernardino@usp.br>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms, like NonStop do not automatically restart fsync()
when interrupted by a signal, even when that signal is setup with
SA_RESTART.
This can lead to test breakage, e.g., where "--progress" is used,
thus SIGALRM is sent often, and can interrupt an fsync() syscall.
Make sure we deal with such a case by retrying the syscall
ourselves. Luckily, we call fsync() fron a single wrapper,
fsync_or_die(), so the fix is fairly isolated.
Reported-by: Randall S. Becker <randall.becker@nexbridge.ca>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Taylor Blau <me@ttaylorr.com>
[jc: the above two did most of the work---I just tied the loose end]
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent change to make git-completion.bash use $__git_cmd_idx
in more places broke a number of completions on zsh because it
modified __git_main but did not update __git_zsh_main.
Notably, completions for "add", "branch", "mv" and "push" were
broken as a result of this change.
In addition to the undefined variable usage, "git mv <tab>" also
prints the following error:
__git_count_arguments:7: bad math expression:
operand expected at `"1"'
_git_mv:[:7: unknown condition: -gt
Remove the quotes around $__git_cmd_idx in __git_count_arguments
and set __git_cmd_idx=1 early in __git_zsh_main to fix the
regressions from 59d85a2a05.
This was tested on zsh 5.7.1 (x86_64-apple-darwin19.0).
Suggested-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Acked-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Contributor for a new language must complete translations of a small set
of l10n messages.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Document the PO helper program (git-po-helper) with installation and
basic usage.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Fix a warning on AIX's xlc compiler that's been emitted since my
a1aad71601 (fsck.h: use "enum object_type" instead of "int",
2021-03-28):
"builtin/fsck.c", line 805.32: 1506-068 (W) Operation between
types "int(*)(struct object*,enum object_type,void*,struct
fsck_options*)" and "int(*)(struct object*,int,void*,struct
fsck_options*)" is not allowed.
I.e. it complains about us assigning a function with a prototype "int"
where we're expecting "enum object_type".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix-up to a topic that is already in 'master'.
* en/dir-traversal:
dir: introduce readdir_skip_dot_and_dotdot() helper
dir: update stale description of treat_directory()
Revert "dir: update stale description of treat_directory()"
Revert "dir: introduce readdir_skip_dot_and_dotdot() helper"
Many places in the code were doing
while ((d = readdir(dir)) != NULL) {
if (is_dot_or_dotdot(d->d_name))
continue;
...process d...
}
Introduce a readdir_skip_dot_and_dotdot() helper to make that a one-liner:
while ((d = readdir_skip_dot_and_dotdot(dir)) != NULL) {
...process d...
}
This helper particularly simplifies checks for empty directories.
Also use this helper in read_cached_dir() so that our statistics are
consistent across platforms. (In other words, read_cached_dir() should
have been using is_dot_or_dotdot() and skipping such entries, but did
not and left it to treat_path() to detect and mark such entries as
path_none.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation comment for treat_directory() was originally written
in 095952 (Teach directory traversal about subprojects, 2007-04-11)
which was before the 'struct dir_struct' split its bitfield of named
options into a 'flags' enum in 7c4c97c0 (Turn the flags in struct
dir_struct into a single variable, 2009-02-16). When those flags
changed, the comment became stale, since members like
'show_other_directories' transitioned into flags like
DIR_SHOW_OTHER_DIRECTORIES.
Update the comments for treat_directory() to use these flag names rather
than the old member names.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"ld" on Solaris fails to link some test helpers, which has been
worked around by reshuffling the inline function definitions from a
header file to a source file that is the only user of them.
* ab/pack-linkage-fix:
pack-objects: move static inline from a header to the sole consumer
Workaround flaky tests introduced recently.
* ds/t1092-fix-flake-from-progress:
t1092: revert the "-1" hack for emulating "no progress meter"
t1092: use GIT_PROGRESS_DELAY for consistent results
Move the code that is only used in builtin/pack-objects.c out of
pack-objects.h.
This fixes an issue where Solaris's SunCC hasn't been able to compile
git since 483fa7f42d (t/helper/test-bitmap.c: initial commit,
2021-03-31).
The real origin of that issue is that in 898eba5e63 (pack-objects:
refer to delta objects by index instead of pointer, 2018-04-14)
utility functions only needed by builtin/pack-objects.c were added to
pack-objects.h. Since then the header has been used in a few other
places, but 483fa7f42d was the first time it was used by test helper.
Since Solaris is stricter about linking and the oe_get_size_slow()
function lives in builtin/pack-objects.c the build started failing
with:
Undefined first referenced
symbol in file
oe_get_size_slow t/helper/test-bitmap.o
ld: fatal: symbol referencing errors. No output written to t/helper/test-tool
On other platforms this is presumably OK because the compiler and/or
linker detects that the "static inline" functions that reference
oe_get_size_slow() aren't used.
Let's solve this by moving the relevant code from pack-objects.h to
builtin/pack-objects.c. This is almost entirely a code-only move, but
because of the early macro definitions in that file referencing some
of these inline functions we need to move the definition of "static
struct packing_data to_pack" earlier, and declare these inline
functions above the macros.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t2080 makes a few copies of a test repository and later performs a
branch switch on each one of the copies to verify that parallel checkout
and sequential checkout produce the same results. However, the
repository is copied with `cp -R` which, on some systems, defaults to
following symlinks on the directory hierarchy and copying their target
files instead of copying the symlinks themselves. AIX is one example of
system where this happens. Because the symlinks are not preserved, the
copied repositories have paths that do not match what is in the index,
causing git to abort the checkout operation that we want to test. This
makes the test fail on these systems.
Fix this by copying the repository with the POSIX flag '-P', which
forces cp to copy the symlinks instead of following them. Note that we
already use this flag for other cp invocations in our test suite (see
t7001). With this change, t2080 now passes on AIX.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the newly added "hooks_path" API in Git.pm to its only user in
git-send-email.perl. This was added in c8243933c7 (git-send-email:
Respect core.hooksPath setting, 2021-03-23), meaning that it hasn't
yet made it into a non-rc release of git.
The consensus with Git.pm is that we need to be considerate of
out-of-tree users who treat it as a public documented interface. We
should therefore be less willing to add new functionality to it, least
we be stuck supporting it after our own uses for it disappear.
In this case the git-send-email.perl hook invocation will probably be
replaced by a future "git hook run" command, and in the commit
preceding this one the "hooks_path" become nothing but a trivial
wrapper for "rev-parse --git-path hooks" anyway (with no
Cwd::abs_path() call), so let's just inline this command in
git-send-email.perl itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In c8243933c7 (git-send-email: Respect core.hooksPath setting,
2021-03-23) we started supporting core.hooksPath in "send-email". It's
been reported that on Windows[1] doing this by calling abs_path()
results in different canonicalizations of the absolute path.
This wasn't an issue in c8243933c7 itself, but was revealed by my
ea7811b37e (git-send-email: improve --validate error output,
2021-04-06) when we started emitting the path to the hook, which was
previously only internal to git-send-email.perl.
The just-landed 53753a37d0 (t9001-send-email.sh: fix expected
absolute paths on Windows, 2021-05-24) narrowly fixed this issue, but
I believe we can do better here. We should not be relying on whatever
changes Perl's abs_path() makes to the path "rev-parse --git-path
hooks" hands to us. Let's instead trust it, and hand it to Perl's
system() in git-send-email.perl. It will handle either a relative or
absolute path.
So let's revert most of 53753a37d0 and just have "hooks_path" return
what we get from "rev-parse" directly without modification. This has
the added benefit of making the error message friendlier in the common
case, we'll no longer print an absolute path for repository-local hook
errors.
1. http://lore.kernel.org/git/bb30fe2b-cd75-4782-24a6-08bb002a0367@kdbg.org
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This looked like a good idea, but it seems to break tests on 32-bit
builds rather badly. Revert to just use "100 thousands must be big
enough" for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The t1092-sparse-checkout-compatibility.sh tests compare the stdout and
stderr for several Git commands across both full checkouts, sparse
checkouts with a full index, and sparse checkouts with a sparse index.
Since these are direct comparisons, sometimes a progress indicator can
flush at unpredictable points, especially on slower machines. This
causes the tests to be flaky.
One standard way to avoid this is to add GIT_PROGRESS_DELAY=0 to the Git
commands that are run, as this will force every progress indicator
created with start_progress_delay() to be created immediately. However,
there are some progress indicators that are created in the case of a
full index that are not created with a sparse index. Moreover, their
values may be different as those indexes have a different number of
entries.
Instead, use GIT_PROGRESS_DELAY=-1 (which will turn into UINT_MAX)
to ensure that any reasonable machine running these tests would
never display delayed progress indicators.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to read the init.templateDir setting at builtin/init-db.c using
a git_config() callback that, in turn, called git_config_pathname(). To
simplify the config reading logic at this file and plug a memory leak,
this was replaced by a direct call to git_config_get_value() at
e4de4502e6 ("init: remove git_init_db_config() while fixing leaks",
2021-03-14). However, this function doesn't provide path expanding
semantics, like git_config_pathname() does, so paths with '~/' and
'~user/' are treated literally. This makes 'git init' fail to handle
init.templateDir paths using these constructs:
$ git config init.templateDir '~/templates_dir'
$ git init
'warning: templates not found in ~/templates_dir'
Replace the git_config_get_value() call by git_config_get_pathname(),
which does the '~/' and '~user/' expansions. Also add a regression test.
Note that unlike git_config_get_value(), the config cache does not own
the memory for the path returned by git_config_get_pathname(), so we
must free() it.
Reported on IRC by rkta.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression with the "the editor exited uncleanly, aborting
everything" error message going missing after my
d21616c039 (git-send-email: refactor duplicate $? checks into a
function, 2021-04-06).
I introduced a $msg variable, but did not actually use it. This caused
us to miss the optional error message supplied by the "do_edit"
codepath. Fix that, and add tests to check that this works.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git for Windows is a native Windows program that works with native
absolute paths in the drive letter style C:\dir. The auxiliary
infrastructure is based on MSYS2, which uses POSIX style /C/dir.
When we test for output of absolute paths produced by git.exe, we
usally have to expect C:\dir style paths. To produce such expected
paths, we have to use $(pwd) in the test scripts; the alternative,
$PWD, produces a POSIX style path. ($PWD is a shell variable, and the
shell is bash, an MSYS2 program, and operates in the POSIX realm.)
There are two recently added tests that were written to expect C:\dir
paths. The output that is tested is produced by `git send-email`, but
behind the scenes, this is a Perl script, which also works in the
POSIX realm and produces /C/dir style output.
In the first test case that is changed here, replace $(pwd) by $PWD
so that the expected path is constructed using /C/dir style.
The second test case sets core.hooksPath to an absolute path. Since
the test script talks to native git.exe, it is supposed to place a
C:/dir style path into the configuration; therefore, keep $(pwd).
When this configuration value is consumed by the Perl script, it is
transformed to /C/dir style by the MSYS2 layer and echoed back in
this form in the error message. Hence, do use $PWD for the expected
value.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Another brown paper bag inconsistency fix for a new feature
introduced during this cycle.
* dl/stash-show-untracked-fixup:
stash show: use stash.showIncludeUntracked even when diff options given
The "simple-ipc" did not compile without pthreads support, but the
build procedure was not properly account for it.
* jh/simple-ipc-sans-pthread:
simple-ipc: correct ifdefs when NO_PTHREADS is defined
The "rev-parse" command did not diagnose the lack of argument to
"--path-format" option, which was introduced in v2.31 era, which
has been corrected.
* wm/rev-parse-path-format-wo-arg:
rev-parse: fix segfault with missing --path-format argument
If options pertaining to how the diff is displayed is provided to
`git stash show`, the command will ignore the stash.showIncludeUntracked
configuration variable, defaulting to not showing any untracked files.
This is unintuitive behaviour since the format of the diff output and
whether or not to display untracked files are orthogonal.
Use stash.showIncludeUntracked even when diff options are given. Of
course, this is still overridable via the command-line options.
Update the documentation to explicitly say which configuration variables
will be overridden when a diff options are given.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regression fix for a change made during this cycle.
* cs/http-use-basic-after-failed-negotiate:
Revert "remote-curl: fall back to basic auth if Negotiate fails"
t5551: test http interaction with credential helpers
Find typos in "po/TEAMS" file using the "git-po-helper" program. These
typos were introduced from commit v2.24.0-1-g9917eca794 (l10n: zh_TW:
add translation for v2.24.0, 2019-11-20 19:14:22 +0800).
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
The "chainlint" feature in the test framework is a handy way to
catch common mistakes in writing new tests, but tends to get
expensive. An knob to selectively disable it has been introduced
to help running tests that the developer has not modified.
* jk/test-chainlint-softer:
t: avoid sed-based chain-linting in some expensive cases
The handling of "%(push)" formatting element of "for-each-ref" and
friends was broken when the same codepath started handling
"%(push:<what>)", which has been corrected.
* zh/ref-filter-push-remote-fix:
ref-filter: fix read invalid union member bug
"git clone" from SHA256 repository by Git built with SHA-1 as the
default hash algorithm over the dumb HTTP protocol did not
correctly set up the resulting repository, which has been corrected.
* ew/sha256-clone-remote-curl-fix:
remote-curl: fix clone on sha256 repos
"git clean" and "git ls-files -i" had confusion around working on
or showing ignored paths inside an ignored directory, which has
been corrected.
* en/dir-traversal:
dir: introduce readdir_skip_dot_and_dotdot() helper
dir: update stale description of treat_directory()
dir: traverse into untracked directories if they may have ignored subfiles
dir: avoid unnecessary traversal into ignored directory
t3001, t7300: add testcase showcasing missed directory traversal
t7300: add testcase showing unnecessary traversal into ignored directory
ls-files: error out on -i unless -o or -c are specified
dir: report number of visited directories and paths with trace2
dir: convert trace calls to trace2 equivalents
This reverts commit 1b0d9545bb.
That commit does fix the situation it intended to (avoiding Negotiate
even when the credentials were provided in the URL), but it creates a
more serious regression: we now never hit the conditional for "we had a
username and password, tried them, but the server still gave us a 401".
That has two bad effects:
1. we never call credential_reject(), and thus a bogus credential
stored by a helper will live on forever
2. we never return HTTP_NOAUTH, so the error message the user gets is
"The requested URL returned error: 401", instead of "Authentication
failed".
Doing this correctly seems non-trivial, as we don't know whether the
Negotiate auth was a problem. Since this is a regression in the upcoming
v2.23.0 release (for which we're in -rc0), let's revert for now and work
on a fix separately.
(Note that this isn't a pure revert; the previous commit added a test
showing the regression, so we can now flip it to expect_success).
Reported-by: Ben Humphreys <behumphreys@atlassian.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We test authentication with http, and we independently test that
credential helpers work, but we don't have any tests that cover the
two features working together. Let's add two:
1. Make sure that a successful request asks the helper to save the
credential. This works as expected.
2. Make sure that a failed request asks the helper to forget the
credential. This is marked as expect_failure, as it was recently
regressed by 1b0d9545bb (remote-curl: fall back to basic auth if
Negotiate fails, 2021-03-22). The symptom here is that the second
request should prompt the user, but doesn't.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While testing the sparse-index, I verified a test with --valgrind and it
complained about an uninitialized value being used in a jump in the
path_matches_pattern_list() method. The line was this one:
if (*dtype == DT_UNKNOWN)
In the call stack, the culprit was the initialization of the dtype
variable in convert_to_sparse_rec().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The C_LOCALE_OUTPUT prerequisite was removed in b1e079807b (tests:
remove last uses of C_LOCALE_OUTPUT, 2021-02-11), where Ævar noted:
I'm not leaving the prerequisite itself in place for in-flight changes
as there currently are none that introduce new tests that rely on it,
and because C_LOCALE_OUTPUT is currently a noop on the master branch
we likely won't have any new submissions that use it.
One more use of C_LOCALE_OUTPUT did creep in with 3d1bda6b5b (t7500: add
tests for --fixup=[amend|reword] options, 2021-03-15). This causes a
number of the tests to be skipped by default:
ok 35 # SKIP --fixup=reword: incompatible with --all (missing C_LOCALE_OUTPUT)
ok 36 # SKIP --fixup=reword: incompatible with --include (missing C_LOCALE_OUTPUT)
ok 37 # SKIP --fixup=reword: incompatible with --only (missing C_LOCALE_OUTPUT)
ok 38 # SKIP --fixup=reword: incompatible with --interactive (missing C_LOCALE_OUTPUT)
ok 39 # SKIP --fixup=reword: incompatible with --patch (missing C_LOCALE_OUTPUT)
Remove the C_LOCALE_OUTPUT prerequisite from these tests so they are
not skipped.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calling "git rev-parse --path-format" without an argument segfaults
instead of giving an error message. Commit fac60b8925 (rev-parse: add
option for absolute or relative path formatting, 2020-12-13) added the
argument parsing code but forgot to handle NULL.
Returning an error makes sense here because there is no default value we
could use. Add a test case to verify.
Signed-off-by: Wolfgang Müller <wolf@oriole.systems>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Eliminated 'Negation of emptiness' of 'nenhum' (not one/none)
* Eliminated 'Negation of emptiness' of 'nada' (nothing)
* Transformed 'Não' (No) into affirmative
* Some other translations
* Transforming 'não' (no) into affirmative
* From junção-de-3 to tri-junção
Signed-off-by: Daniel Santos <hello@brighterdan.com>
The code to handle options recently added to "git stash show"
around untracked part of the stash segfaulted when these options
were used on a stash entry that does not record untracked part.
* dl/stash-show-untracked-fixup:
stash show: fix segfault with --{include,only}-untracked
t3905: correct test title
When "git update-ref -d" removes a ref that is packed, it left
empty directories under $GIT_DIR/refs/ for
* wc/packed-ref-removal-cleanup:
refs: cleanup directories when deleting packed ref
"git mailinfo" (hence "git am") learned the "--quoted-cr" option to
control how lines ending with CRLF wrapped in base64 or qp are
handled.
* dd/mailinfo-quoted-cr:
am: learn to process quoted lines that ends with CRLF
mailinfo: allow stripping quoted CR without warning
mailinfo: allow squelching quoted CRLF warning
mailinfo: warn if CRLF found in decoded base64/QP email
mailinfo: stop parsing options manually
mailinfo: load default metainfo_charset lazily
The final part of "parallel checkout".
* mt/parallel-checkout-part-3:
ci: run test round with parallel-checkout enabled
parallel-checkout: add tests related to .gitattributes
t0028: extract encoding helpers to lib-encoding.sh
parallel-checkout: add tests related to path collisions
parallel-checkout: add tests for basic operations
checkout-index: add parallel checkout support
builtin/checkout.c: complete parallel checkout support
make_transient_cache_entry(): optionally alloc from mem_pool
"git push" learns to discover common ancestor with the receiving
end over protocol v2.
* jt/push-negotiation:
send-pack: support push negotiation
fetch: teach independent negotiation (no packfile)
fetch-pack: refactor command and capability write
fetch-pack: refactor add_haves()
fetch-pack: refactor process_acks()
"git add -i --dry-run" does not dry-run, which was surprising. The
combination of options has taught to error out.
* ow/no-dryrun-in-add-i:
add: die if both --dry-run and --interactive are given
"git p4" learned to find branch points more efficiently.
* jk/p4-locate-branch-point-optim:
git-p4: speed up search for branch parent
git-p4: ensure complex branches are cloned correctly
Over-the-wire protocol learns a new request type to ask for object
sizes given a list of object names.
* ba/object-info:
object-info: support for retrieving object info
The word-diff mode has been taught to work better with a word
regexp that can match an empty string.
* pw/word-diff-zero-width-matches:
word diff: handle zero length matches
Commit 878f988350 (t/test-lib: teach --chain-lint to detect broken
&&-chains in subshells, 2018-07-11) introduced additional chain-lint
tests which add an extra "sed" pipeline to each test we run. This has a
measurable impact on runtime. Here are timings with and without a new
environment variable (added by this patch) that lets you disable just
the additional sed-based chain-lint tests:
Benchmark #1: GIT_TEST_CHAIN_LINT_HARDER=1 make test
Time (mean ± σ): 64.202 s ± 1.030 s [User: 622.469 s, System: 301.402 s]
Range (min … max): 61.571 s … 65.662 s 10 runs
Benchmark #2: GIT_TEST_CHAIN_LINT_HARDER=0 make test
Time (mean ± σ): 57.591 s ± 0.333 s [User: 529.368 s, System: 270.618 s]
Range (min … max): 57.143 s … 58.309 s 10 runs
Summary
'GIT_TEST_CHAIN_LINT_HARDER=0 make test' ran
1.11 ± 0.02 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=1 make test'
Of course those extra lint checks are doing something useful, so paying
a few extra seconds (at least on Linux) isn't so bad (though note the
CPU time; we're bounded in our parallel run here by the slowest test, so
it really is ~120s of CPU improvement).
But we can observe that there are some test scripts where they produce a
much stronger effect, and provide less value. In t0027 and t3070 we run
a very large number of small tests, all driven by a series of
functions/loops which are filling in the test bodies. There we get much
less bang for our buck in terms of bug-finding versus CPU cost.
This patch introduces a mechanism for controlling when those extra
lint checks are run, at two levels:
- a user can ask to disable or to force-enable the checks by setting
GIT_TEST_CHAIN_LINT_HARDER
- if the user hasn't specified a preference, individual scripts can
disable the checks by setting GIT_TEST_CHAIN_LINT_HARDER_DEFAULT;
scripts which don't set that get the current behavior of enabling
them.
In addition, this patch flips the default for t0027 and t3070's
mass-generated sections to disable the extra checks. Here are the timing
results for t0027:
Benchmark #1: GIT_TEST_CHAIN_LINT_HARDER=1 ./t0027-auto-crlf.sh
Time (mean ± σ): 17.078 s ± 0.848 s [User: 14.878 s, System: 7.075 s]
Range (min … max): 15.952 s … 18.421 s 10 runs
Benchmark #2: GIT_TEST_CHAIN_LINT_HARDER=0 ./t0027-auto-crlf.sh
Time (mean ± σ): 9.063 s ± 0.759 s [User: 7.890 s, System: 3.362 s]
Range (min … max): 7.747 s … 10.619 s 10 runs
Benchmark #3: ./t0027-auto-crlf.sh
Time (mean ± σ): 9.186 s ± 0.881 s [User: 7.957 s, System: 3.427 s]
Range (min … max): 7.796 s … 10.498 s 10 runs
Summary
'GIT_TEST_CHAIN_LINT_HARDER=0 ./t0027-auto-crlf.sh' ran
1.01 ± 0.13 times faster than './t0027-auto-crlf.sh'
1.88 ± 0.18 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=1 ./t0027-auto-crlf.sh'
We can see that disabling the checks for the whole script buys us an
almost 2x speedup. But the new default behavior, disabling them only for
the mass-generated part, gets us most of that speedup (but still leaves
the checks on for further manual tests people might write).
As a side note, I'd caution about comparing runtimes and CPU seconds
between this timing and the earlier "make test" one. In "make test",
we're running a lot of scripts in parallel, so the CPU is throttling
down (and thus a CPU second saved here would count for more during a
parallel run; the same work takes more CPU seconds there).
We get similar results for t3070:
Benchmark #1: GIT_TEST_CHAIN_LINT_HARDER=1 ./t3070-wildmatch.sh
Time (mean ± σ): 20.054 s ± 3.967 s [User: 16.003 s, System: 8.286 s]
Range (min … max): 11.891 s … 23.671 s 10 runs
Benchmark #2: GIT_TEST_CHAIN_LINT_HARDER=0 ./t3070-wildmatch.sh
Time (mean ± σ): 12.399 s ± 2.256 s [User: 7.542 s, System: 5.342 s]
Range (min … max): 9.606 s … 15.727 s 10 runs
Benchmark #3: ./t3070-wildmatch.sh
Time (mean ± σ): 10.726 s ± 3.476 s [User: 6.790 s, System: 4.365 s]
Range (min … max): 5.444 s … 15.376 s 10 runs
Summary
'./t3070-wildmatch.sh' ran
1.16 ± 0.43 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=0 ./t3070-wildmatch.sh'
1.87 ± 0.71 times faster than 'GIT_TEST_CHAIN_LINT_HARDER=1 ./t3070-wildmatch.sh'
Again, we get almost a 2x speedup disabling these. In this case, there
are no tests not covered by the script's "default to disable" behavior,
so the second two benchmarks should be the same (and while they do
differ, you can see the variance is quite high but they're within one
standard deviation).
So it seems like for these two scripts, at least, disabling the extra
checks is a reasonable tradeoff. Sadly, the overall runtime of "make
test" on my system doesn't get much faster. But that's because we're
mostly limited by the cost of the single biggest test. Here are the
top-5 tests by wall-clock time from a parallel run, before my patch:
57.9192368984222 t9001-send-email.sh
45.6329638957977 t0027-auto-crlf.sh
32.5278220176697 t3070-wildmatch.sh
22.2701289653778 t7610-mergetool.sh
20.8635759353638 t1701-racy-split-index.sh
And after:
57.1476998329163 t9001-send-email.sh
33.776211977005 t0027-auto-crlf.sh
21.3116669654846 t7610-mergetool.sh
20.7748689651489 t1701-racy-split-index.sh
19.6957249641418 t7112-reset-submodule.sh
We dropped 12s from t0027, and t3070 dropped off our list entirely at
around 16s. In both cases we're bound by t9001, but its slowness is
due to the actual tests, so we'll have to deal with it in a different
way. But this reduces overall CPU, and means that dealing with t9001 (by
improving the speed of send-email or splitting it apart) will let us
reduce our overall runtime even on multi-core machines.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit afda36dbf3 ("git-prompt: include sparsity state as well",
2020-06-21) added the use of some variables to control how to show
sparsity state in the git prompt, but implicitly assumed that undefined
variables would be treated as the empty string. This breaks users who
run under 'set -u'; fix the code to be more explicit.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git stash show --include-untracked` or
`git stash show --only-untracked` is run on a stash that doesn't include
an untracked entry, a segfault occurs. This happens because we do not
check whether the untracked entry is actually present and just attempt
to blindly dereference it.
Ensure that the untracked entry is present before actually attempting to
dereference it.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We reference the non-existent option `git stash show --show-untracked`
when we really meant `--only-untracked`. Correct the test title
accordingly.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many places in the code were doing
while ((d = readdir(dir)) != NULL) {
if (is_dot_or_dotdot(d->d_name))
continue;
...process d...
}
Introduce a readdir_skip_dot_and_dotdot() helper to make that a one-liner:
while ((d = readdir_skip_dot_and_dotdot(dir)) != NULL) {
...process d...
}
This helper particularly simplifies checks for empty directories.
Also use this helper in read_cached_dir() so that our statistics are
consistent across platforms. (In other words, read_cached_dir() should
have been using is_dot_or_dotdot() and skipping such entries, but did
not and left it to treat_path() to detect and mark such entries as
path_none.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation comment for treat_directory() was originally written
in 095952 (Teach directory traversal about subprojects, 2007-04-11)
which was before the 'struct dir_struct' split its bitfield of named
options into a 'flags' enum in 7c4c97c0 (Turn the flags in struct
dir_struct into a single variable, 2009-02-16). When those flags
changed, the comment became stale, since members like
'show_other_directories' transitioned into flags like
DIR_SHOW_OTHER_DIRECTORIES.
Update the comments for treat_directory() to use these flag names rather
than the old member names.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A directory that is untracked does not imply that all files under it
should be categorized as untracked; in particular, if the caller is
interested in ignored files, many files or directories underneath the
untracked directory may be ignored. We previously partially handled
this right with DIR_SHOW_IGNORED_TOO, but missed DIR_SHOW_IGNORED. It
was not obvious, though, because the logic for untracked and excluded
files had been fused together making it harder to reason about. The
previous commit split that logic out, making it easier to notice that
DIR_SHOW_IGNORED was missing. Add it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The show_other_directories case in treat_directory() tried to handle
both excludes and untracked files with the same logic, and mishandled
both the excludes and the untracked files in the process, in different
ways. Split that logic apart, and then focus on the logic for the
excludes; a subsequent commit will address the logic for untracked
files.
For show_other_directories, an excluded directory means that
every path underneath that directory will also be excluded. Given that
the calling code requested to just show directories when everything
under a directory had the same state (that's what the
"DIR_SHOW_OTHER_DIRECTORIES" flag means), we generally do not need to
traverse into such directories and can just immediately mark them as
ignored (i.e. as path_excluded). The only reason we cannot just
immediately return path_excluded is the DIR_HIDE_EMPTY_DIRECTORIES flag
and the possibility that the ignored directory is an empty directory.
The code previously treated DIR_SHOW_IGNORED_TOO in most cases as an
exception as well, which was wrong. It can sometimes reduce the number
of cases where we need to recurse (namely if
DIR_SHOW_IGNORED_TOO_MODE_MATCHING is also set), but should not be able
to increase the number of cases where we need to recurse. Fix the logic
accordingly.
Some sidenotes about possible confusion with dir.c:
* "ignored" often refers to an untracked ignore", i.e. a file which is
not tracked which matches one of the ignore/exclusion rules. But you
can also have a "tracked ignore", a tracked file that happens to match
one of the ignore/exclusion rules and which dir.c has to worry about
since "git ls-files -c -i" is supposed to list them.
* The dir code often uses "ignored" and "excluded" interchangeably,
which you need to keep in mind while reading the code.
* "exclude" is used multiple ways in the code:
* As noted above, "exclude" is often a synonym for "ignored".
* The logic for parsing .gitignore files was re-used in
.git/info/sparse-checkout, except there it is used to mark paths that
the user wants to *keep*. This was mostly addressed by commit
65edd96aec ("treewide: rename 'exclude' methods to 'pattern'",
2019-09-03), but every once in a while you'll find a comment about
"exclude" referring to these patterns that might in fact be in use
by the sparse-checkout machinery for inclusion rules.
* The word "EXCLUDE" is also used for pathspec negation, as in
(pathspec->items[3].magic & PATHSPEC_EXCLUDE)
Thus if a user had a .gitignore file containing
*~
*.log
!settings.log
And then ran
git add -- 'settings.*' ':^settings.log'
Then :^settings.log is a pathspec negation making settings.log not
be requested to be added even though all other settings.* files are
being added. Also, !settings.log in the gitignore file is a negative
exclude pattern meaning that settings.log is normally a file we
want to track even though all other *.log files are ignored.
Sometimes it feels like dir.c needs its own glossary with its many
definitions, including the multiply-defined terms.
Reported-by: Jason Gore <Jason.Gore@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the last commit, we added a testcase showing that the directory
traversal machinery sometimes traverses into directories unnecessarily.
Here we show that there are cases where it does the opposite: it does
not traverse into directories, despite those directories having
important files that need to be flagged.
Add a testcase showing that `git ls-files -o -i --directory` can omit
some of the files it should be listing, and another showing that `git
clean -fX` can fail to clean out some of the expected files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The PNPM package manager is apparently creating deeply nested (but
ignored) directory structures; traversing them is costly
performance-wise, unnecessary, and in some cases is even throwing
warnings/errors because the paths are too long to handle on various
platforms. Add a testcase that checks for such unnecessary directory
traversal.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-files --ignored can be used together with either --others or
--cached. After being perplexed for a bit and digging in to the code, I
assumed that ls-files -i was just broken and not printing anything and
I had a nice patch ready to submit when I finally realized that -i can be
used with --cached to find tracked ignores.
While that was a mistake on my part, and a careful reading of the
documentation could have made this more clear, I suspect this is an
error others are likely to make as well. In fact, of two uses in our
testsuite, I believe one of the two did make this error. In t1306.13,
there are NO tracked files, and all the excludes built up and used in
that test and in previous tests thus have to be about untracked files.
However, since they were looking for an empty result, the mistake went
unnoticed as their erroneous command also just happened to give an empty
answer.
-i will most the time be used with -o, which would suggest we could just
make -i imply -o in the absence of either a -o or -c, but that would be
a backward incompatible break. Instead, let's just flag -i without
either a -o or -c as an error, and update the two relevant testcases to
specify their intent.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide more statistics in trace2 output that include the number of
directories and total paths visited by the directory traversal logic.
Subsequent patches will take advantage of this to ensure we do not
unnecessarily traverse into ignored directories.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 07d90eadb5 (Makefile: add Perl runtime prefix support,
2018-04-10) PERL_DEFINES has been a simply-expanded variable, let's
make it recursively expanded instead.
This change doesn't matter for the correctness of the logic. Whether
we used simply-expanded or recursively expanded didn't change what we
wrote out in GIT-PERL-DEFINES, but being consistent with other rules
makes this easier to understand.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The remote-https process needs to update it's own instance of
`the_repository' when it sees an HTTP(S) remote is using sha256.
Without this, parse_oid_hex() fails to handle sha256 OIDs when
it's eventually called by parse_fetch().
Tested with:
git clone https://yhbt.net/sha256test.git
GIT_SMART_HTTP=0 git clone https://yhbt.net/sha256test.git
(plain http:// also works)
Cloning the URL via git:// required no changes
Signed-off-by: Eric Wong <e@80x24.org>
Acked-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
used_atom.u is an union, and it has different members depending on
what atom the auxiliary data the union part of the "struct
used_atom" wants to record. At most only one of the members can be
valid at any one time. Since the code checks u.remote_ref without
even making sure if the atom is "push" or "push:" (which are only
two cases that u.remote_ref.push becomes valid), but u.remote_ref
shares the same storage for other members of the union, the check
was reading from an invalid member, which was the bug.
Modify the condition here to check whether the atom name
equals to "push" or starts with "push:", to avoid reading the
value of invalid member of the union.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
[jc: further test fixes]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes two memory leaks when running `git maintenance start` or `git
maintenance stop` in `update_background_schedule`:
$ valgrind --leak-check=full ~/git/bin/git maintenance start
==76584== Memcheck, a memory error detector
==76584== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
==76584== Using Valgrind-3.16.1 and LibVEX; rerun with -h for copyright info
==76584== Command: /home/lenaic/git/bin/git maintenance start
==76584==
==76584==
==76584== HEAP SUMMARY:
==76584== in use at exit: 34,880 bytes in 252 blocks
==76584== total heap usage: 820 allocs, 568 frees, 146,414 bytes allocated
==76584==
==76584== 65 bytes in 1 blocks are definitely lost in loss record 17 of 39
==76584== at 0x483E6AF: malloc (vg_replace_malloc.c:306)
==76584== by 0x3DC39C: xrealloc (wrapper.c:126)
==76584== by 0x3992CC: strbuf_grow (strbuf.c:98)
==76584== by 0x39A473: strbuf_vaddf (strbuf.c:392)
==76584== by 0x39BC54: xstrvfmt (strbuf.c:979)
==76584== by 0x39BD2C: xstrfmt (strbuf.c:989)
==76584== by 0x18451B: update_background_schedule (gc.c:1977)
==76584== by 0x1846F6: maintenance_start (gc.c:2011)
==76584== by 0x1847B4: cmd_maintenance (gc.c:2030)
==76584== by 0x127A2E: run_builtin (git.c:453)
==76584== by 0x127E81: handle_builtin (git.c:704)
==76584== by 0x128142: run_argv (git.c:771)
==76584==
==76584== 240 bytes in 1 blocks are definitely lost in loss record 29 of 39
==76584== at 0x4840D7B: realloc (vg_replace_malloc.c:834)
==76584== by 0x491CE5D: getdelim (in /usr/lib/libc-2.33.so)
==76584== by 0x39ADD7: strbuf_getwholeline (strbuf.c:635)
==76584== by 0x39AF31: strbuf_getdelim (strbuf.c:706)
==76584== by 0x39B064: strbuf_getline_lf (strbuf.c:727)
==76584== by 0x184273: crontab_update_schedule (gc.c:1919)
==76584== by 0x184678: update_background_schedule (gc.c:1997)
==76584== by 0x1846F6: maintenance_start (gc.c:2011)
==76584== by 0x1847B4: cmd_maintenance (gc.c:2030)
==76584== by 0x127A2E: run_builtin (git.c:453)
==76584== by 0x127E81: handle_builtin (git.c:704)
==76584== by 0x128142: run_argv (git.c:771)
==76584==
==76584== LEAK SUMMARY:
==76584== definitely lost: 305 bytes in 2 blocks
==76584== indirectly lost: 0 bytes in 0 blocks
==76584== possibly lost: 0 bytes in 0 blocks
==76584== still reachable: 34,575 bytes in 250 blocks
==76584== suppressed: 0 bytes in 0 blocks
==76584== Reachable blocks (those to which a pointer was found) are not shown.
==76584== To see them, rerun with: --leak-check=full --show-leak-kinds=all
==76584==
==76584== For lists of detected and suppressed errors, rerun with: -s
==76584== ERROR SUMMARY: 2 errors from 2 contexts (suppressed: 0 from 0)
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr>
Acked-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way the command line specified by the trailer.<token>.command
configuration variable receives the end-user supplied value was
both error prone and misleading. An alternative to achieve the
same goal in a safer and more intuitive way has been added, as
the trailer.<token>.cmd configuration variable, to replace it.
* zh/trailer-cmd:
trailer: add new .cmd config option
docs: correct descript of trailer.<token>.command
Various test and documentation updates about .gitsomething paths
that are symlinks.
* jk/symlinked-dotgitx-cleanup:
docs: document symlink restrictions for dot-files
fsck: warn about symlinked dotfiles we'll open with O_NOFOLLOW
t0060: test ntfs/hfs-obscured dotfiles
t7450: test .gitmodules symlink matching against obscured names
t7450: test verify_path() handling of gitmodules
t7415: rename to expand scope
fsck_tree(): wrap some long lines
fsck_tree(): fix shadowed variable
t7415: remove out-dated comment about translation
Options to "git pack-objects" that take numeric values like
--window and --depth should not accept negative values; the input
validation has been tightened.
* jk/pack-objects-negative-options-fix:
pack-objects: clamp negative depth to 0
t5316: check behavior of pack-objects --depth=0
pack-objects: clamp negative window size to 0
t5300: check that we produced expected number of deltas
t5300: modernize basic tests
"git submodule update --quiet" did not propagate the quiet option
down to underlying "git fetch", which has been corrected.
* nc/submodule-update-quiet:
submodule update: silence underlying fetch with "--quiet"
A few variants of informational message "Already up-to-date" has
been rephrased.
* js/merge-already-up-to-date-message-reword:
merge: fix swapped "up to date" message components
merge(s): apply consistent punctuation to "up to date" messages
"git bisect skip" when custom words are used for new/old did not
work, which has been corrected.
* rj/bisect-skip-honor-terms:
bisect--helper: use BISECT_TERMS in 'bisect skip' command
When deleting a packed ref via 'update-ref -d', a lockfile is made in
the directory that would contain the loose copy of that ref, creating
any directories in the ref's path that do not exist. When the
transaction completes, the lockfile is deleted, but any empty parent
directories made when creating the lockfile are left in place. These
empty directories are not removed by 'pack-refs' or other housekeeping
tasks and will accumulate over time.
When deleting a loose ref, we remove all empty parent directories at the
end of the transaction.
This commit applies the parent directory cleanup logic used when
deleting loose refs to packed refs as well.
Signed-off-by: Will Chandler <wfc@wfchandler.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The word "renamed" has two possible translations in many European
languages depending on whether one thing was renamed or two things were
renamed. Give translators freedom to alter any part of the message to
make it sound right in their language.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git repack -A -d" in a partial clone unnecessarily loosened
objects in promisor pack.
* rs/repack-without-loosening-promised-objects:
repack: avoid loosening promisor objects in partial clones
"git subtree" updates.
* ls/subtree: (30 commits)
subtree: be stricter about validating flags
subtree: push: allow specifying a local rev other than HEAD
subtree: allow 'split' flags to be passed to 'push'
subtree: allow --squash to be used with --rejoin
subtree: give the docs a once-over
subtree: have $indent actually affect indentation
subtree: don't let debug and progress output clash
subtree: add comments and sanity checks
subtree: remove duplicate check
subtree: parse revs in individual cmd_ functions
subtree: use "^{commit}" instead of "^0"
subtree: don't fuss with PATH
subtree: use "$*" instead of "$@" as appropriate
subtree: use more explicit variable names for cmdline args
subtree: use git-sh-setup's `say`
subtree: use `git merge-base --is-ancestor`
subtree: drop support for git < 1.7
subtree: more consistent error propagation
subtree: don't have loose code outside of a function
subtree: t7900: add porcelain tests for 'pull' and 'push'
...
SHA-256 transition.
* bc/hash-transition-interop-part-1:
hex: print objects using the hash algorithm member
hex: default to the_hash_algo on zero algorithm value
builtin/pack-objects: avoid using struct object_id for pack hash
commit-graph: don't store file hashes as struct object_id
builtin/show-index: set the algorithm for object IDs
hash: provide per-algorithm null OIDs
hash: set, copy, and use algo field in struct object_id
builtin/pack-redundant: avoid casting buffers to struct object_id
Use the final_oid_fn to finalize hashing of object IDs
hash: add a function to finalize object IDs
http-push: set algorithm when reading object ID
Always use oidread to read into struct object_id
hash: add an algo member to struct object_id
In previous changes, mailinfo has learnt to process lines that decoded
from base64 or quoted-printable, and ends with CRLF.
Let's teach "am" that new trick, too.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In previous changes, we've turned on warning for quoted CR in base64 or
quoted-printable email messages. Some projects see those quoted CR a lot,
they know that it happens most of the time, and they find it's desirable
to always strip those CR.
Those projects in question usually fall back to use other tools to handle
patches when receive such patches.
Let's help those projects handle those patches by stripping those
excessive CR.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In previous change, Git starts to warn for quoted CRLF in decoded
base64/QP email. Despite those warnings are usually helpful,
quoted CRLF could be part of some users' workflow.
Let's give them an option to turn off the warning completely.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When SMTP servers receive 8-bit email messages, possibly with only
LF as line ending, some of them decide to change said LF to CRLF.
Some mailing list softwares, when receive 8-bit email messages,
decide to encode those messages in base64 or quoted-printable.
If an email is transfered through above mail servers, then distributed
by such mailing list softwares, the recipients will receive an email
contains a patch mungled with CRLF encoded inside another encoding.
Thus, such CR (in CRLF) couldn't be dropped by "mailsplit".
Hence, the mailed patch couldn't be applied cleanly.
Such accidents have been observed in the wild [1].
Instead of silently rejecting those messages, let's give our users
some warnings if such CR (as part of CRLF) is found.
[1]: https://nmbug.notmuchmail.org/nmweb/show/m2lf9ejegj.fsf%40guru.guru-group.fi
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of "%ch" is missing a space after "human style", before
the parenthetical remark. This description was introduced in b722d4560e
("pretty: provide human date format", 2021-04-25). That commit also
added "%ah", which does have the space already.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop the ")" at the end of this paragraph. There's a parenthetical
remark in this paragraph, but it's been closed on the line above.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Portability fix for command line completion script (in contrib/).
* si/zsh-complete-comment-fix:
work around zsh comment in __git_complete_worktree_paths
Further update the command line completion (in contrib/) for "git
stash".
* dl/complete-stash-updates:
git-completion.bash: consolidate cases in _git_stash()
git-completion.bash: use $__git_cmd_idx in more places
git-completion.bash: rename to $__git_cmd_idx
git-completion.bash: separate some commands onto their own line
The command line completion (in contrib/) for "git stash" has been
updated.
* dl/complete-stash:
git-completion.bash: use __gitcomp_builtin() in _git_stash()
git-completion.bash: extract from else in _git_stash()
git-completion.bash: pass $__git_subcommand_idx from __git_main()
Plug various leans reported by LSAN.
* ah/plugleaks:
builtin/rm: avoid leaking pathspec and seen
builtin/rebase: release git_format_patch_opt too
builtin/for-each-ref: free filter and UNLEAK sorting.
mailinfo: also free strbuf lists when clearing mailinfo
builtin/checkout: clear pending objects after diffing
builtin/check-ignore: clear_pathspec before returning
builtin/bugreport: don't leak prefixed filename
branch: FREE_AND_NULL instead of NULL'ing real_ref
bloom: clear each bloom_key after use
ls-files: free max_prefix when done
wt-status: fix multiple small leaks
revision: free remainder of old commit list in limit_list
"git rev-list" learns the "--filter=object:type=<type>" option,
which can be used to exclude objects of the given kind from the
packfile generated by pack-objects.
* ps/rev-list-object-type-filter:
rev-list: allow filtering of provided items
pack-bitmap: implement combined filter
pack-bitmap: implement object type filter
list-objects: implement object type filter
list-objects: support filtering by tag and commit
list-objects: move tag processing into its own function
revision: mark commit parents as NOT_USER_GIVEN
uploadpack.txt: document implication of `uploadpackfilter.allow`
"git rebase --[no-]reschedule-failed-exec" did not work well with
its configuration variable, which has been corrected.
* ab/rebase-no-reschedule-failed-exec:
rebase: don't override --no-reschedule-failed-exec with config
rebase tests: camel-case rebase.rescheduleFailedExec consistently
Dev support.
* ab/doc-lint:
docs: fix linting issues due to incorrect relative section order
doc lint: lint relative section order
doc lint: lint and fix missing "GIT" end sections
doc lint: fix bugs in, simplify and improve lint script
doc lint: Perl "strict" and "warnings" in lint-gitlink.perl
Documentation/Makefile: make doc.dep dependencies a variable again
Documentation/Makefile: make $(wildcard howto/*.txt) a var
"git add" and "git rm" learned not to touch those paths that are
outside of sparse checkout.
* mt/add-rm-in-sparse-checkout:
rm: honor sparse checkout patterns
add: warn when asked to update SKIP_WORKTREE entries
refresh_index(): add flag to ignore SKIP_WORKTREE entries
pathspec: allow to ignore SKIP_WORKTREE entries on index matching
add: make --chmod and --renormalize honor sparse checkouts
t3705: add tests for `git add` in sparse checkouts
add: include magic part of pathspec on --refresh error
Replace GIT_CONFIG_NOSYSTEM mechanism to decline from reading the
system-wide configuration file with GIT_CONFIG_SYSTEM that lets
users specify from which file to read the system-wide configuration
(setting it to an empty file would essentially be the same as
setting NOSYSTEM), and introduce GIT_CONFIG_GLOBAL to override the
per-user configuration in $HOME/.gitconfig.
* ps/config-global-override:
t1300: fix unset of GIT_CONFIG_NOSYSTEM leaking into subsequent tests
config: allow overriding of global and system configuration
config: unify code paths to get global config paths
config: rename `git_etc_config()`
"git log --format=..." placeholders learned %ah/%ch placeholders to
request the --date=human output.
* zh/pretty-date-human:
pretty: provide human date format
"git (branch|tag) --format=..." has been micro-optimized.
* zh/format-ref-array-optim:
ref-filter: reuse output buffer
ref-filter: get rid of show_ref_array_item
When we swapped the order of --3way fallback, we forgot to adjust
the message we give when the first method fails and the second
method is attempted (which used to be "direct application failed
hence we try 3way", now it is the other way around).
* jz/apply-3way-first-message-fix:
apply: adjust messages to account for --3way changes
When the reachability bitmap is in effect, the "do not lose
recently created objects and those that are reachable from them"
safety to protect us from races were disabled by mistake, which has
been corrected.
* jk/prune-with-bitmap-fix:
prune: save reachable-from-recent objects with bitmaps
pack-bitmap: clean up include_check after use
Tweak a few tests for "log --format=..." that show timestamps in
various formats.
* ab/pretty-date-format-tests:
pretty tests: give --date/format tests a better description
pretty tests: simplify %aI/%cI date format test
"git --config-env var=val cmd" weren't accepted (only
--config-env=var=val was).
* ps/config-env-option-with-separate-value:
git: support separate arg for `--config-env`'s value
git.txt: fix synopsis of `--config-env` missing the equals sign
The variable `matches` used to hold the return of a `dir_path_match()`
call that was removed in 95c11ecc73 ("Fix error-prone fill_directory()
API; make it only return matches", 2020-04-01). Now `matches` will
always hold 0, which is the value it's initialized with; and the
condition `matches != MATCHED_EXACTLY` will always evaluate to true. So
let's remove this unnecessary variable.
Interestingly, it seems that `matches != MATCHED_EXACTLY` was already
unnecessary before 95c11ecc73. That's because `remove_directories` is
always set to 1 when we have pathspecs; So, in the condition
`!remove_directories && matches != MATCHED_EXACTLY`, we would either:
- have pathspecs (or have been given `-d`) and ignore `matches` because
`remove_directories` is 1; or
- not have pathspecs (nor `-d`) and end up just checking that
`0 != MATCHED_EXACTLY`, as `matches` would never get reassigned
after its zero initialization (because there is no pathspec to match).
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later change, mailinfo will learn more options, let's switch to our
robust parse_options framework before that step.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later change, we will use parse_option to parse mailinfo's options.
In mailinfo, both "-u", "-n", and "--encoding" try to set the same
field, with "-u" reset that field to some default value from
configuration variable "i18n.commitEncoding".
Let's delay the setting of that field until we finish processing all
options. By doing that, "i18n.commitEncoding" can be parsed on demand.
More importantly, it cleans the way for using parse_option.
This change introduces some inconsistent brackets "{}" in "if/else if"
construct, however, we will rewrite them in the next few changes.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interactive machinery does not obey --dry-run. Die appropriately
if both flags are passed.
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the logic of the i18n functions I added in 5e9637c629 (i18n:
add infrastructure for translating Git with gettext, 2011-11-18) to
use pass-through functions when NO_GETTEXT is defined.
This speeds up the compilation time of commands that use this library
when NO_GETTEXT=Y is in effect. Loading it and POSIX.pm is around 20ms
on my machine, whereas it takes 2ms to just instantiate perl itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regenerate the *.pm files in perl/build/* if the
NO_PERL_CPAN_FALLBACKS flag added to the *.pm files in
1aca69c019 (perl Git::LoadCPAN: emit better errors under
NO_PERL_CPAN_FALLBACKS, 2018-03-03) is changed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the logic to generate perl/build/* to regenerate those files if
GIT-PERL-DEFINES changes. This ensures that e.g. changing localedir
will result in correctly re-generated files.
I don't think that ever worked. The brokenness pre-dates my
20d2a30f8f (Makefile: replace perl/Makefile.PL with simple make
rules, 2017-12-10).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 07d90eadb5 (Makefile: add Perl runtime prefix support,
2018-04-10) we have been declaring PERL_DEFINES right after assigning
to it, with the effect that the first PERL_DEFINES was ignored.
That bug didn't matter in practice since the first line had all the
same variables as the second, so we'd correctly re-generate
everything. It just made for confusing reading.
Let's remove that first assignment, and while we're at it split these
across lines to make them more maintainable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the definition of the structure around the open/close/read
functions introduced in 46bf043807 (streaming: a new API to read from
the object store, 2011-05-11) to instead populate "close" and "read"
members in the "struct git_istream".
This gets us rid of an extra pointer deference, and I think makes more
sense. The "close" and "read" functions are the primary interface to
the stream itself.
Let's also populate a "open" callback in the same struct. That's now
used by open_istream() after istream_source() decides what "open"
function should be used. This isn't needed to get rid of the
"stream_vtbl" variables, but makes sense for consistency.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the streaming interface to stop passing around the "struct
object_info" the open() functions.
As seen in 7ef2d9a260 (streaming: read non-delta incrementally from a
pack, 2011-05-13) which introduced the "st->u.in_pack" assignments
being changed here only the open_istream_pack_non_delta() path need
these.
So let's instead do this when preparing the selected callback in the
istream_source() function. This might also allow the compiler to
reduce the lifetime of the "oi" variable, as we've moved it from
"git_istream()" to "istream_source()".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the {open,close,read}_method_decl() macros added in
46bf043807 (streaming: a new API to read from the object store,
2011-05-11) in favor of inlining the definition of the arguments of
these functions.
Since we'll end up using them via the "{open,close,read}_istream_fn"
types we don't gain anything in the way of compiler checking by using
these macros, and as of preceding commits we no longer need to declare
these argument lists twice. So declaring them at a distance just
serves to make the code less readable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the indirection of discovering a function pointer to use via an
enum and virtual table. This refactors code added in
46bf043807 (streaming: a new API to read from the object store,
2011-05-11).
We can instead simply return an "open_istream_fn" for use from the
"istream_source()" selector function directly. This allows us to get
rid of the "incore", "loose" and "pack_non_delta" enum
variables. We'll return the functions instead.
The "stream_error" variable in that enum can likewise go in favor of
returning NULL, which is what the open_istream() was doing when it got
that value anyway.
We can thus remove the entire enum, and the "open_istream_tbl" virtual
table that (indirectly) referenced it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code added in 46bf043807 (streaming: a new API to read from
the object store, 2011-05-11) to avoid forward declarations of the
functions it uses. We can instead move this code to the bottom of the
file, and thus avoid the open_method_decl() calls.
Aside from the addition of the "static helpers[...]" comment being
added here, and the removal of the forward declarations this is a
move-only change.
The style of the added "static helpers[...]" comment isn't in line
with our usual coding style, but is consistent with several other
comments used in this file, so let's use that style consistently here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the set_index_sparse_config() function by folding it into
set_sparse_index_config(), which was its only user.
Since 122ba1f7b5 (sparse-checkout: toggle sparse index from builtin,
2021-03-30) the flow of this code hasn't made much sense, we'd get
"enabled" in set_sparse_index_config(), proceed to call
set_index_sparse_config() with it.
There we'd call prepare_repo_settings() and set
"repo->settings.sparse_index = 1", only to needlessly call
prepare_repo_settings() again in set_sparse_index_config() (where it
would early abort), and finally setting "repo->settings.sparse_index =
enabled".
Instead we can just call prepare_repo_settings() once, and set the
variable to "enabled" in the first place.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For every new branch that git-p4 imports, it needs to find the commit
where it branched off its parent branch. While p4 doesn't record this
information explicitly, the first changelist on a branch is usually an
identical copy of the parent branch.
The method searchParent() tries to find a commit in the history of the
given "parent" branch whose tree exactly matches the initial changelist
of the new branch, "target". The code iterates through the parent
commits and compares each of them to this initial changelist using
diff-tree.
Since we already know the tree object name we are looking for, spawning
diff-tree for each commit is wasteful.
Use the "--format" option of "rev-list" to find out the tree object name
of each commit in the history, and find the tree whose name is exactly
the same as the tree of the target commit to optimize this.
This results in a considerable speed-up, at least on Windows. On one
Windows machine with a fairly large repository of about 16000 commits in
the parent branch, the current code takes over 7 minutes, while the new
code only takes just over 10 seconds for the same changelist:
Before:
$ time git p4 sync
Importing from/into multiple branches
Depot paths: //depot
Importing revision 31274 (100.0%)
Updated branches: b1
real 7m41.458s
user 0m0.000s
sys 0m0.077s
After:
$ time git p4 sync
Importing from/into multiple branches
Depot paths: //depot
Importing revision 31274 (100.0%)
Updated branches: b1
real 0m10.235s
user 0m0.000s
sys 0m0.062s
Signed-off-by: Joachim Kuebart <joachim.kuebart@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When importing a branch from p4, git-p4 searches the history of the parent
branch for the branch point. The test for the complex branch structure
ensures all files have the expected contents, but doesn't examine the
branch structure.
Check for the correct branch structure by making sure that the initial
commit on each branch is empty. This ensures that the initial commit's
parent is indeed the correct branch-off point.
Signed-off-by: Joachim Kuebart <joachim.kuebart@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xdl_prepare_env() calls xdl_classify_record() which arranges for the
hashes of non-matching lines to be different so lines can be tested
for equality by comparing just their hashes.
This reduces the time taken to calculate the diff of v2.28.0 to
v2.29.0 by ~3-4%.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If find_word_boundaries() encounters a zero length match (which can be
caused by matching a newline or using '*' instead of '+' in the regex)
we stop splitting the input into words which generates an inaccurate
diff. To fix this increment the start point when there is a zero
length match and try a new match. This is safe as posix regular
expressions always return the longest available match so a zero length
match means there are no longer matches available from the current
position.
Commit bf82940dbf (color-words: enable REG_NEWLINE to help user,
2009-01-17) prevented matching newlines in negated character classes
but it is still possible for the user to have an explicit newline
match in the regex which could cause a zero length match.
One could argue that having explicit newline matches or using '*'
rather than '+' are user errors but it seems to be better to work
round them than produce inaccurate diffs.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have tests for the basic parallel-checkout operations. But
this code can also run be executed by other commands, such as
git-read-tree and git-sparse-checkout, which are currently not tested
with multiple workers. To promote a wider test coverage without
duplicating tests:
1. Add the GIT_TEST_CHECKOUT_WORKERS environment variable, to optionally
force parallel-checkout execution during the whole test suite.
2. Set this variable (with a value of 2) in the second test round of our
linux-gcc CI job. This round runs `make test` again with some
optional GIT_TEST_* variables enabled, so there is no additional
overhead in exercising the parallel-checkout code here.
Note that tests checking out less than two parallel-eligible entries
will fall back to the sequential mode. Nevertheless, it's still a good
exercise for the parallel-checkout framework as the fallback codepath
also writes the queued entries using the parallel-checkout functions
(only without spawning any worker).
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests to populate the working tree during clone and checkout using
sequential and parallel mode, to confirm that they produce identical
results. Also test basic checkout mechanics, such as checking for
symlinks in the leading directories and the abidance to --force.
Note: some helper functions are added to a common lib file which is only
included by t2080 for now. But they will also be used by other
parallel-checkout tests in the following patches.
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests to confirm that the `struct conv_attrs` data is correctly
passed from the main process to the workers, and that they can properly
convert the blobs before writing them to the working tree.
Also check that parallel-ineligible entries, such as regular files that
require external filters, are correctly smudge and written when
parallel-checkout is enabled.
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow checkout-index to use the parallel checkout framework, honoring
the checkout.workers configuration.
There are two code paths in checkout-index which call
`checkout_entry()`, and thus, can make use of parallel checkout:
`checkout_file()`, which is used to write paths explicitly given at the
command line; and `checkout_all()`, which is used to write all paths in
the index, when the `--all` option is given.
In both operation modes, checkout-index doesn't abort immediately on a
`checkout_entry()` failure. Instead, it tries to check out all remaining
paths before exiting with a non-zero exit code. To keep this behavior
when parallel checkout is being used, we must allow
`run_parallel_checkout()` to try writing the queued entries before we
exit, even if we already got an error code from a previous
`checkout_entry()` call.
However, `checkout_all()` doesn't return on errors, it calls `exit()`
with code 128. We could make it call `run_parallel_checkout()` before
exiting, but it makes the code easier to follow if we unify the exit
path for both checkout-index modes at `cmd_checkout_index()`, and let
this function take care of the interactions with the parallel checkout
API. So let's do that.
With this change, we also have to consider whether we want to keep using
128 as the error code for `git checkout-index --all`, while we use 1 for
`git checkout-index <path>` (even when the actual error is the same).
Since there is not much value in having code 128 only for `--all`, and
there is no mention about it in the docs (so it's unlikely that changing
it will break any existing script), let's make both modes exit with code
1 on `checkout_entry()` errors.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following patch will add tests outside t0028 which will also need to
re-encode some strings. Extract the auxiliary encoding functions from
t0028 to a common lib file so that they can be reused.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests to confirm that path collisions are properly detected by
checkout workers, both to avoid race conditions and to report colliding
entries on clone.
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pathspec-limited checkouts (like `git checkout *.txt`) are performed by
a code path that doesn't yet support parallel checkout because it calls
checkout_entry() directly, instead of unpack_trees(). Let's add parallel
checkout support for this code path too.
The transient cache entries allocated in checkout_merged() are now
allocated in a mem_pool which is only discarded after parallel checkout
finishes. This is done because the entries need to be valid when
run_parallel_checkout() is called.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow make_transient_cache_entry() to optionally receive a mem_pool
struct in which it should allocate the entry. This will be used in the
following patch, to store some transient entries which should persist
until parallel checkout finishes.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A HTTP-clone test introduced in 4fe788b1b0 ("builtin/clone.c: add
--reject-shallow option", 2021-04-01) only works in protocol v2, but is
not marked as such.
The aforementioned patch implements --reject-shallow for a variety of
situations, but usage of a protocol that requires a remote helper is not
one of them. (Such an implementation would require extending the remote
helper protocol to support the passing of a "reject shallow" option, and
then teaching it to both protocol-speaking ends.)
For now, to make it pass when GIT_TEST_PROTOCOL_VERSION=0 is passed, add
"-c protocol.version=2". A more complete solution would be either to
augment the remote helper protocol to support this feature or to return
a fatal error when using --reject-shallow with a protocol that uses a
remote helper.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the packfile negotiation step within a Git fetch cannot be
done independent of sending the packfile, even though there is at least
one application wherein this is useful. Therefore, make it possible for
this negotiation step to be done independently. A subsequent commit will
use this for one such application - push negotiation.
This feature is for protocol v2 only. (An implementation for protocol v0
would require a separate implementation in the fetch, transport, and
transport helper code.)
In the protocol, the main hindrance towards independent negotiation is
that the server can unilaterally decide to send the packfile. This is
solved by a "wait-for-done" argument: the server will then wait for the
client to say "done". In practice, the client will never say it; instead
it will cease requests once it is satisfied.
In the client, the main change lies in the transport and transport
helper code. fetch_refs_via_pack() performs everything needed - protocol
version and capability checks, and the negotiation itself.
There are 2 code paths that do not go through fetch_refs_via_pack() that
needed to be individually excluded: the bundle transport (excluded
through requiring smart_options, which the bundle transport doesn't
support) and transport helpers that do not support takeover. If or when
we support independent negotiation for protocol v0, we will need to
modify these 2 code paths to support it. But for now, report failure if
independent negotiation is requested in these cases.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[PATCH]: contrib/completion/git-completion.bash, there is a construct
where comment lines are placed between the command that is on
the upstream of a pipe and the command that is on the downstream
of a pipe in __git_complete_worktree_paths function.
Unfortunately, this script is also used by Zsh completion, but
Zsh mishandles this construct when "interactive_comments" option is not
set (by default it is off on macOS), resulting in a breakage:
$ git worktree remove [TAB]
$ git worktree remove __git_complete_worktree_paths:7: command not found: #
Move the comment, even though it explains what happens on the
downstream of the pipe and logically belongs where it is right
now, before the entire pipeline, to work around this problem.
Signed-off-by: Sardorbek Imomaliev <sardorbek.imomaliev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `trailer.<token>.command` configuration variable
specifies a command (run via the shell, so it does not have
to be a single name or path to the command, but can be a
shell script), and the first occurrence of substring $ARG is
replaced with the value given to the `interpret-trailer`
command for the token in a '--trailer <token>=<value>' argument.
This has three downsides:
* The use of $ARG in the mechanism misleads the users that
the value is passed in the shell variable, and tempt them
to use $ARG more than once, but that would not work, as
the second and subsequent $ARG are not replaced.
* Because $ARG is textually replaced without regard to the
shell language syntax, even '$ARG' (inside a single-quote
pair), which a user would expect to stay intact, would be
replaced, and worse, if the value had an unmatched single
quote (imagine a name like "O'Connor", substituted into
NAME='$ARG' to make it NAME='O'Connor'), it would result in
a broken command that is not syntactically correct (or
worse).
* The first occurrence of substring `$ARG` will be replaced
with the empty string, in the command when the command is
first called to add a trailer with the specified <token>.
This is a bad design, the nature of automatic execution
causes it to add a trailer that we don't expect.
Introduce a new `trailer.<token>.cmd` configuration that
takes higher precedence to deprecate and eventually remove
`trailer.<token>.command`, which passes the value as an
argument to the command. Instead of "$ARG", users can
refer to the value as positional argument, $1, in their
scripts. At the same time, in order to allow
`git interpret-trailers` to better simulate the behavior
of `git command -s`, 'trailer.<token>.cmd' will not
automatically execute.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the original documentation of `trailer.<token>.command`,
some descriptions are easily misunderstood. So let's modify
it to increase its readability.
In addition, clarify that `$ARG` in command can only be
replaced once.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We stopped allowing symlinks for .gitmodules files in 10ecfa7649
(verify_path: disallow symlinks in .gitmodules, 2018-05-04), and we
stopped following symlinks for .gitattributes, .gitignore, and .mailmap
in the commits from 204333b015 (Merge branch 'jk/open-dotgitx-with-nofollow',
2021-03-22). The reasons are discussed in detail there, but we never
adjusted the documentation to let users know.
This hasn't been a big deal since the point is that such setups were
mildly broken and thought to be unusual anyway. But it certainly doesn't
hurt to be clear and explicit about it.
Suggested-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the commits merged in via 204333b015 (Merge branch
'jk/open-dotgitx-with-nofollow', 2021-03-22), we stopped following
symbolic links for .gitattributes, .gitignore, and .mailmap files.
Let's teach fsck to warn that these symlinks are not going to do
anything. Note that this is just a warning, and won't block the objects
via transfer.fsckObjects, since there are reported to be cases of this
in the wild (and even once fixed, they will continue to exist in the
commit history of those projects, but are not particularly dangerous).
Note that we won't add these to the existing gitmodules block in the
fsck code. The logic for gitmodules is a bit more complicated, as we
also check the content of non-symlink instances we find. But for these
new files, there is no content check; we're just looking at the name and
mode of the tree entry (and we can avoid even the complicated name
checks in the common case that the mode doesn't indicate a symlink).
We can reuse the test helper function we defined for .gitmodules, though
(it needs some slight adjustments for the fsck error code, and because
we don't block these symlinks via verify_path()).
Note that I didn't explicitly test the transfer.fsckObjects case here
(nor does the existing .gitmodules test that it blocks a push). The
translation of fsck severities to outcomes is covered in general in
t5504.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have tests that cover various filesystem-specific spellings of
".gitmodules", because we need to reliably identify that path for some
security checks. These are from dc2d9ba318 (is_{hfs,ntfs}_dotgitmodules:
add tests, 2018-05-12), with the actual code coming from e7cb0b4455
(is_ntfs_dotgit: match other .git files, 2018-05-11) and 0fc333ba20
(is_hfs_dotgit: match other .git files, 2018-05-02).
Those latter two commits also added similar matching functions for
.gitattributes and .gitignore. These ended up not being used in the
final series, and are currently dead code. But in preparation for them
being used in some fsck checks, let's make sure they actually work by
throwing a few basic tests at them. Likewise, let's cover .mailmap
(which does need matching code added).
I didn't bother with the whole battery of tests that we cover for
.gitmodules. These functions are all based on the same generic matcher,
so it's sufficient to test most of the corner cases just once.
Note that the ntfs magic prefix names in the tests come from the
algorithm described in e7cb0b4455 (and are different for each file).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t7450 we check that both verify_path() and fsck catch malformed
.gitmodules entries in trees. However, we don't check that we catch
filesystem-equivalent forms of these (e.g., ".GITMOD~1" on Windows).
Our name-matching functions are exercised well in t0060, but there's
nothing to test that we correctly call the matching functions from the
actual fsck and verify_path() code.
So instead of testing just .gitmodules, let's repeat our tests for a few
basic cases. We don't need to be exhaustive here (t0060 handles that),
but just make sure we hit one name of each type.
Besides pushing the tests into a function that takes the path as a
parameter, we'll need to do a few things:
- adjust the directory name to accommodate the tests running multiple
times
- set core.protecthfs for index checks. Fsck always protects all types
by default, but we want to be able to exercise the HFS routines on
every system. Note that core.protectntfs is already the default
these days, but it doesn't hurt to explicitly label our need for it.
- we'll also take the filename ("gitmodules") as a parameter. All
calls use the same name for now, but a future patch will extend this
to handle other .gitfoo files. Note that our fake-content symlink
destination is somewhat .gitmodules specific. But it isn't necessary
for other files (which don't do a content check). And it happens to
be a valid attribute and ignore file anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 10ecfa7649 (verify_path: disallow symlinks in .gitmodules,
2018-05-04) made it impossible to load a symlink .gitmodules file into
the index. However, there are no tests of this behavior. Let's make sure
this case is covered. We can easily reuse the test setup created by
the matching b7b1fca175 (fsck: complain when .gitmodules is a symlink,
2018-05-04).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script has already expanded beyond its original intent of ".. in
submodule names" to include other malicious submodule bits. Let's update
the name and description to reflect that, as well as the fact that we'll
soon be adding similar tests for other dotfiles (.gitattributes, etc).
We'll also renumber it to move it out of the group of submodule-specific
tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many calls to report() in fsck_tree() are kept on a single line and are
quite long. Most were pretty big to begin with, but have gotten even
longer over the years as we've added more parameters. Let's accept the
churn of wrapping them in order to conform to our usual line limits.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b2f2039c2b (fsck: accept an oid instead of a "struct tree" for
fsck_tree(), 2019-10-18) introduced a new "oid" parameter to
fsck_tree(), and we pass it to the report() function when we find
problems. However, that is shadowed within the tree-walking loop by the
existing "oid" variable which we use to store the oid of each tree
entry. As a result, we may report the wrong oid for some problems we
detect within the loop (the entry oid, instead of the tree oid).
Our tests didn't catch this because they checked only that we found the
expected fsck problem, not that it was attached to the correct object.
Let's rename both variables in the function to avoid confusion. This
makes the diff a little noisy (e.g., all of the report() calls outside
the loop were already correct but need to be touched), but makes sure we
catch all cases and will avoid similar confusion in the future.
And we can update the test to be a bit more specific and catch this
problem.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since GETTEXT_POISON does not exist anymore, there is no point warning
people about whether we should use test_i18ngrep. This is doubly
confusing because the comment was describing why it was OK to use grep,
but it got caught up in the mass conversion of 674ba34038 (fsck: mark
strings for translation, 2018-11-10).
Note there are other uses of test_i18ngrep in this script which are now
obsolete; I'll save those for a mass-cleanup. My goal here was just to
fix the confusing comment in code I'm about to refactor.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Format-patch doesn't have a way to format merges in a way that can be
applied by git-am (or any other tool), and so it just omits them.
However, this may be a surprising implication for users who are not well
versed in how the tool works. Let's add a note to the documentation
making this more clear.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A negative delta depth makes no sense, and the code is not prepared to
handle it. If passed "--depth=-1" on the command line, then this line
from break_delta_chains():
cur->depth = (total_depth--) % (depth + 1);
triggers a divide-by-zero. This is undefined behavior according to the C
standard, but on POSIX systems results in SIGFPE killing the process.
This is certainly one way to inform the use that the command was
invalid, but it's a bit friendlier to just treat it as "don't allow any
deltas", which we already do for --depth=0.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'd expect this to cleanly produce no deltas at all (as opposed to
getting confused by an out-of-bounds value), and it does.
Note we have to adjust our max_chain test helper, which expected to find
at least one delta.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A negative window size makes no sense, and the code in find_deltas() is
not prepared to handle it. If you pass "-1", for example, we end up
generate a 0-length array of "struct unpacked", but our loop assumes it
has at least one entry in it (and we end up reading garbage memory).
We could complain to the user about this, but it's more forgiving to
just clamp it to 0, which means "do not find any deltas at all". The
0-case is already tested earlier in the script, so we'll make sure this
does the same thing.
Reported-by: Yiyuan guo <yguoaz@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We pack a set of objects both with and without --window=0, assuming that
the 0-length window will cause us not to produce any deltas. Let's
confirm that this is the case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first set of tests in t5300 goes back to 2005, and doesn't use some
of our customary style and tools these days. In preparation for touching
them, let's modernize a few things:
- titles go on the line with test_expect_success, with a hanging
open-quote to start the test body
- test bodies should be indented with tabs
- opening braces for shell blocks in &&-chains go on their own line
- no space between redirect operators and files (">foo", not "> foo")
- avoid doing work outside of test blocks; in this case, we can stick
the setup of ".git2" into the appropriate blocks
- avoid modifying and then cleaning up the environment or current
directory by using subshells and "git -C"
- this test does a curious thing when testing the unpacking: it sets
GIT_OBJECT_DIRECTORY, and then does a "git init" in the _original_
directory, creating a weird mixed situation. Instead, it's much
simpler to just "git init --bare" a new repository to unpack into,
and check the results there. I renamed this "git2" instead of
".git2" to make it more clear it's a separate repo.
- we can observe that the bodies of the no-delta, ref_delta, and
ofs_delta cases are all virtually identical except for the pack
creation, and factor out shared helper functions. I collapsed "do
the unpack" and "check the results of the unpack" into a single
test, since that makes the expected lifetime of the "git2" temporary
directory more clear (that also lets us use test_when_finished to
clean it up). This does make the "-v" output slightly less useful,
but the improvement in reading the actual test code makes it worth
it.
- I dropped the "pwd" calls from some tests. These don't do anything
functional, and I suspect may have been an aid for debugging when
the script was more cavalier about leaving the working directory
changed between tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
01d3a526 (t0000: check whether the shell supports the "local"
keyword, 2017-10-26) raised a test balloon to see if those who build
and test Git use a platform with a shell that lacks support for the
"local" keyword. After two years, 7f0b5908 (t0000: reword comments
for "local" test, 2019-08-08) documented that "local" keyword, even
though is outside POSIX, is allowed in our test scripts.
Let's write it in the CodingGuidelines, too. It might be tempting
to allow it in scripted Porcelains (we have avoided getting them
contaminiated by "local" so far), but they are on their way out and
getting rewritten in C.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rewrite of git-merge from shell to C in 1c7b76be7d (Build in merge,
2008-07-07) accidentally transformed the message:
Already up-to-date. (nothing to squash)
to:
(nothing to squash)Already up-to-date.
due to reversed printf() arguments. This problem has gone unnoticed
despite being touched over the years by 7f87aff22c (Teach/Fix pull/fetch
-q/-v options, 2008-11-15) and bacec47845 (i18n: git-merge basic
messages, 2011-02-22), and tangentially by bef4830e88 (i18n: merge: mark
messages for translation, 2016-06-17) and 7560f547e6 (treewide: correct
several "up-to-date" to "up to date", 2017-08-23).
Fix it by restoring the message to its intended order. While at it, help
translators out by avoiding "sentence Lego".
[es: rewrote commit message]
Co-authored-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although the various "Already up to date" messages resulting from merge
attempts share identical phrasing, they use a mix of punctuation ranging
from "." to "!" and even "Yeeah!", which leads to extra work for
translators. Ease the job of translators by settling upon "." as
punctuation for all such messages.
While at it, take advantage of printf_ln() to further ease the
translation task so translators need not worry about line termination,
and fix a case of missing line termination in the (unused)
merge_ort_nonrecursive() function.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commands such as
$ git submodule update --quiet --init --depth=1
involving shallow clones, call the shell function fetch_in_submodule, which
in turn invokes git fetch. Pass the --quiet option onward there.
Signed-off-by: Nicholas Clark <nick@ccl4.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify that pathnames recorded in Git trees are most often (but
not necessarily) encoded in UTF-8.
* ab/pathname-encoding-doc:
doc: clarify the filename encoding in git diff
Effort to make the command line completion (in contrib/) safe with
"set -u" continues.
* vs/completion-with-set-u:
completion: avoid aliased command lookup error in nounset mode
Show errno in the trace output in the error codepath that calls
read_raw_ref method.
* hn/refs-trace-errno:
refs: print errno for read_raw_ref if GIT_TRACE_REFS is set
The checkout machinery has been taught to perform the actual
write-out of the files in parallel when able.
* mt/parallel-checkout-part-2:
parallel-checkout: add design documentation
parallel-checkout: support progress displaying
parallel-checkout: add configuration options
parallel-checkout: make it truly parallel
unpack-trees: add basic support for parallel checkout
Builds on top of the sparse-index infrastructure to mark operations
that are not ready to mark with the sparse index, causing them to
fall back on fully-populated index that they always have worked with.
* ds/sparse-index-protections: (47 commits)
name-hash: use expand_to_path()
sparse-index: expand_to_path()
name-hash: don't add directories to name_hash
revision: ensure full index
resolve-undo: ensure full index
read-cache: ensure full index
pathspec: ensure full index
merge-recursive: ensure full index
entry: ensure full index
dir: ensure full index
update-index: ensure full index
stash: ensure full index
rm: ensure full index
merge-index: ensure full index
ls-files: ensure full index
grep: ensure full index
fsck: ensure full index
difftool: ensure full index
commit: ensure full index
checkout: ensure full index
...
The prefetch task in "git maintenance" assumed that "git fetch"
from any remote would fetch all its local branches, which would
fetch too much if the user is interested in only a subset of
branches there.
* ds/maintenance-prefetch-fix:
maintenance: respect remote.*.skipFetchAll
maintenance: use 'git fetch --prefetch'
fetch: add --prefetch option
maintenance: simplify prefetch logic
"git push --quiet --set-upstream" was not quiet when setting the
upstream branch configuration, which has been corrected.
* ow/push-quiet-set-upstream:
transport: respect verbosity when setting upstream
When packet_write() fails, we gave an extra error message
unnecessarily, which has been corrected.
* mt/pkt-write-errors:
pkt-line: do not report packet write errors twice
Handling of "promisor packs" that allows certain objects to be
missing and lazily retrievable has been optimized (a bit).
* jk/promisor-optim:
revision: avoid parsing with --exclude-promisor-objects
lookup_unknown_object(): take a repository argument
is_promisor_object(): free tree buffer after parsing
Commit e4c7b33747 ("bisect--helper: reimplement `bisect_skip` shell
function in C", 2021-02-03), as part of the shell-to-C conversion,
forgot to read the 'terms' file (.git/BISECT_TERMS) during the new
'bisect skip' command implementation. As a result, the 'bisect skip'
command will use the default 'bad'/'good' terms. If the bisection
terms have been set to non-default values (for example by the
'bisect start' command), then the 'bisect skip' command will fail.
In order to correct this problem, we insert a call to the get_terms()
function, which reads the non-default terms from that file (if set),
in the '--bisect-skip' command implementation of 'bisect--helper'.
Also, add a test[1] to protect against potential future regression.
[1] https://lore.kernel.org/git/xmqqim45h585.fsf@gitster.g/T/#m207791568054b0f8cf1a3942878ea36293273c7d
Reported-by: Trygve Aaberge <trygveaa@gmail.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The backslash character is not a valid part of a file name on Windows.
If, in Windows, Git attempts to write a file that has a backslash
character in the filename, it will be incorrectly interpreted as a
directory separator.
This caused CVE-2019-1354 in MinGW, as this behaviour can be manipulated
to cause the checkout to write to files it ought not write to, such as
adding code to the .git/hooks directory. This was fixed by e1d911dd4c
(mingw: disallow backslash characters in tree objects' file names,
2019-09-12). However, the vulnerability also exists in Cygwin: while
Cygwin mostly provides a POSIX-like path system, it will still interpret
a backslash as a directory separator.
To avoid this vulnerability, CVE-2021-29468, extend the previous fix to
also apply to Cygwin.
Similarly, extend the test case added by the previous version of the
commit. The test suite doesn't have an easy way to say "run this test
if in MinGW or Cygwin", so add a new test prerequisite that covers both.
As well as checking behaviour in the presence of paths containing
backslashes, the existing test also checks behaviour in the presence of
paths that differ only by the presence of a trailing ".". MinGW follows
normal Windows application behaviour and treats them as the same path,
but Cygwin more closely emulates *nix systems (at the expense of
compatibility with native Windows applications) and will create and
distinguish between such paths. Gate the relevant bit of that test
accordingly.
Reported-by: RyotaK <security@ryotak.me>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While not documented as such, many of the top-level options like
`--git-dir` and `--work-tree` support two syntaxes: they accept both an
equals sign between option and its value, and they do support option and
value as two separate arguments. The recently added `--config-env`
option only supports the syntax with an equals sign.
Mitigate this inconsistency by accepting both syntaxes and add tests to
verify both work.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When executing `git -h`, then the `--config-env` documentation rightly
lists the option as requiring an equals between the option and its
argument: this is the only currently supported format. But the git(1)
manpage incorrectly lists the option as taking a space in between.
Fix the issue by adding the missing space.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-of-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" specifically calls out when it is falling back to 3way
merge application. Since the order changed to preferring 3way and
falling back to direct application, continue that behavior by
printing whenever 3way fails and git has to fall back.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We pass our prune expiration to mark_reachable_objects(), which will
traverse not only the reachable objects, but consider any recent ones as
tips for reachability; see d3038d22f9 (prune: keep objects reachable
from recent objects, 2014-10-15) for details.
However, this interacts badly with the bitmap code path added in
fde67d6896 (prune: use bitmaps for reachability traversal, 2019-02-13).
If we hit the bitmap-optimized path, we return immediately to avoid the
regular traversal, accidentally skipping the "also traverse recent"
code.
Instead, we should do an if-else for the bitmap versus regular
traversal, and then follow up with the "recent" traversal in either
case. This reuses the "rev_info" for a bitmap and then a regular
traversal, but that should work OK (the bitmap code clears the pending
array in the usual way, just like a regular traversal would).
Note that I dropped the comment above the regular traversal here. It
has little explanatory value, and makes the if-else logic much harder to
read.
Here are a few variants that I rejected:
- it seems like both the reachability and recent traversals could be
done in a single traversal. This was rejected by d3038d22f9 (prune:
keep objects reachable from recent objects, 2014-10-15), though the
balance may be different when using bitmaps. However, there's a
subtle correctness issue, too: we use revs->ignore_missing_links for
the recent traversal, but not the reachability one.
- we could try using bitmaps for the recent traversal, too, which
could possibly improve performance. But it would require some fixes
in the bitmap code, which uses ignore_missing_links for its own
purposes. Plus it would probably not help all that much in practice.
We use the reachable tips to generate bitmaps, so those objects are
likely not covered by bitmaps (unless they just became unreachable).
And in general, we expect the set of unreachable objects to be much
smaller anyway, so there's less to gain.
The test in t5304 detects the bug and confirms the fix.
I also beefed up the tests in t6501, which covers the mtime-checking
code more thoroughly, to handle the bitmap case (in addition to just
"loose" and "packed" cases). Interestingly, this test doesn't actually
detect the bug, because it is running "git gc", and not "prune"
directly. And "gc" will call "repack" first, which does not suffer the
same bug. So the old-but-reachable-from-recent objects get scooped up
into the new pack along with the actually-recent objects, which gives
both a recent mtime. But it seemed prudent to get more coverage of the
bitmap case for related code.
Reported-by: David Emett <dave@sp4m.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a bitmap walk has to traverse (to fill in non-bitmapped objects),
we use rev_info's include_check mechanism to let us stop the traversal
early. But after setting the function and its data parameter, we never
clean it up. This means that if the rev_info is used for a subsequent
traversal without bitmaps, it will unexpectedly call into our
include_check function (worse, it will do so pointing to a now-defunct
stack variable in include_check_data, likely resulting in a segfault).
There's no code which does this now, but it's an accident waiting to
happen. Let's clean up after ourselves in the bitmap code.
Reported-by: David Emett <dave@sp4m.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't silently ignore a flag that's invalid for a given subcommand. The
user expected it to do something; we should tell the user that they are
mistaken, instead of surprising the user.
It could be argued that this change might break existing users. I'd
argue that those existing users are already broken, and they just don't
know it. Let them know that they're broken.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git subtree split' lets you specify a rev other than HEAD. 'git push'
lets you specify a mapping between a local thing and a remot ref. So
smash those together, and have 'git subtree push' let you specify which
local thing to run split on and push the result of that split to the
remote ref.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'push' does a 'split' internally, but it doesn't pass flags through to the
'split'. This is silly, if you need to pass flags to 'split', then it
means that you can't use 'push'!
So, have 'push' accept 'split' flags, and pass them through to 'split'.
Add tests for this by copying split's tests with minimal modification.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Besides being a genuinely useful thing to do, this also just makes sense
and harmonizes which flags may be used when. `git subtree split
--rejoin` amounts to "automatically go ahead and do a `git subtree
merge` after doing the main `git subtree split`", so it's weird and
arbitrary that you can't pass `--squash` to `git subtree split --rejoin`
like you can `git subtree merge`. It's weird that `git subtree split
--rejoin` inherits `git subtree merge`'s `--message` but not `--squash`.
Reconcile the situation by just having `split --rejoin` actually just
call `merge` internally (or call `add` instead, as appropriate), so it
can get access to the full `merge` behavior, including `--squash`.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just went through the docs looking for anything inaccurate or that can
be improved.
In the '-h' text, in the man page synopsis, and in the man page
description: Normalize the ordering of the list of sub-commands: 'add',
'merge', 'split', 'pull', 'push'. This allows us to kinda separate the
lower-level add/merge/split from the higher-level pull/push.
'-h' text:
- correction: Indicate that split's arg is optional.
- clarity: Emphasize that 'pull' takes the 'add'/'merge' flags.
man page:
- correction: State that all subcommands take options (it seemed to
indicate that only 'split' takes any options other than '-P').
- correction: 'split' only guarantees that the results are identical if
the flags are identical.
- correction: The flag is named '--ignore-joins', not '--ignore-join'.
- completeness: Clarify that 'push' always operates on HEAD, and that
'split' operates on HEAD if no local commit is given.
- clarity: In the description, when listing commands, repeat what their
arguments are. This way the reader doesn't need to flip back and
forth between the command description and the synopsis and the full
description to understand what's being said.
- clarity: In the <variables> used to give command arguments, give
slightly longer, descriptive names. Like <local-commit> instead of
just <commit>.
- clarity: Emphasize that 'pull' takes the 'add'/'merge' flags.
- style: In the synopsis, list options before the subcommand. This
makes things line up and be much more readable when shown
non-monospace (such as in `make html`), and also more closely matches
other man pages (like `git-submodule.txt`).
- style: Use the correct syntax for indicating the options ([<options>]
instead of [OPTIONS]).
- style: In the synopsis, separate 'pull' and 'push' from the other
lower-level commands. I think this helps readability.
- style: Code-quote things in prose that seem like they should be
code-quoted, like '.gitmodules', flags, or full commands.
- style: Minor wording improvements, like more consistent mood (many
of the command descriptions start in the imperative mood and switch
to the indicative mode by the end). That sort of thing.
- style: Capitalize "ID".
- style: Remove the "This option is only valid for XXX command" remarks
from each option, and instead rely on the section headings.
- style: Since that line is getting edited anyway, switch "behaviour" to
American "behavior".
- style: Trim trailing whitespace.
`todo`:
- style: Trim trailing whitespace.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the $indent variable is just used to track how deeply we're
nested, and the debug log is indented by things like
debug " foo"
That is: The indentation-level is hard-coded. It used to be that the
code couldn't recurse, so the indentation level could be known
statically, so it made sense to just hard-code it in the
output. However, since 315a84f9aa ("subtree: use commits before rejoins
for splits", 2018-09-28), it can now recurse, and the debug log is
misleading.
So fix that. Indent according to $indent.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, debug output (triggered by passing '-d') and progress output
stomp on each other. The debug output is just streamed as lines to
stderr, and the progress output is sent to stderr as '%s\r'. When
writing to a file, it is awkward to read and difficult to distinguish
between the debug output and a progress line. When writing to a
terminal the debug lines hide progress lines.
So, when '-d' has been passed, spit out progress as 'progress: %s\n',
instead of as '%s\r', so that it can be detected, and so that the debug
lines don't overwrite the progress when written to a terminal.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For each function in subtree, add a usage comment saying what the
arguments are, and add an `assert` checking the number of arguments.
In figuring out each thing's arguments in order to write those comments
and assertions, it turns out that find_existing_splits is written as if
it takes multiple 'revs', but it is in fact only ever passed a single
'rev':
unrevs="$(find_existing_splits "$dir" "$rev")" || exit $?
So go ahead and codify that by documenting and asserting that it takes
exactly two arguments, one dir and one rev.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`cmd_add` starts with a check that the directory doesn't yet exist.
However, the `main` function performs the exact same check before
calling `cmd_add`. So remove the check from `cmd_add`.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main argument parser goes ahead and tries to parse revs to make
things simpler for the sub-command implementations. But, it includes
enough special cases for different sub-commands. And it's difficult
having having to think about "is this info coming from an argument, or a
global variable?". So the main argument parser's effort to make things
"simpler" ends up just making it more confusing and complicated.
Begone with the 'revs' global variable; parse 'rev=$(...)' as needed in
individual 'cmd_*' functions.
Begone with the 'default' global variable. Its would-be value is
knowable just from which function we're in.
Begone with the 'ensure_single_rev' function. Its functionality can be
achieved by passing '--verify' to 'git rev-parse'.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They are synonyms. Both are used in the file. ^{commit} is clearer, so
"standardize" on that.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Scripts needing to fuss with with adding $(git --exec-prefix) PATH
before loading git-sh-setup is a thing of the past. As far as I can
tell, it's been a thing of the past since since Git v1.2.0 (2006-02-12),
or more specifically, since 77cb17e940 (Exec git programs without using
PATH, 2006-01-10). However, it stuck around in contrib scripts and in
third-party scripts for long enough that it wasn't unusual to see.
Originally `git subtree` didn't fuss with PATH, but when people
(including the original subtree author) had problems, because it was a
common thing to see, it seemed that having subtree fuss with PATH was a
reasonable solution.
Here is an abridged history of fussing with PATH in subtree:
2987e6add3 (Add explicit path of git installation by 'git --exec-path', Gianluca Pacchiella, 2009-08-20)
As pointed out by documentation, the correct use of 'git-sh-setup' is
using $(git --exec-path) to avoid problems with not standard
installations.
-. git-sh-setup
+. $(git --exec-path)/git-sh-setup
33aaa697a2 (Improve patch to use git --exec-path: add to PATH instead, Avery Pennarun, 2009-08-26)
If you (like me) are using a modified git straight out of its source
directory (ie. without installing), then --exec-path isn't actually correct.
Add it to the PATH instead, so if it is correct, it'll work, but if it's
not, we fall back to the previous behaviour.
-. $(git --exec-path)/git-sh-setup
+PATH=$(git --exec-path):$PATH
+. git-sh-setup
9c632ea29c ((Hopefully) fix PATH setting for msysgit, Avery Pennarun, 2010-06-24)
Reported by Evan Shaw. The problem is that $(git --exec-path) includes a
'git' binary which is incompatible with the one in /usr/bin; if you run it,
it gives you an error about libiconv2.dll.
+OPATH=$PATH
PATH=$(git --exec-path):$PATH
. git-sh-setup
+PATH=$OPATH # apparently needed for some versions of msysgit
df2302d774 (Another fix for PATH and msysgit, Avery Pennarun, 2010-06-24)
Evan Shaw tells me the previous fix didn't work. Let's use this one
instead, which he says does work.
This fix is kind of wrong because it will run the "correct" git-sh-setup
*after* the one in /usr/bin, if there is one, which could be weird if you
have multiple versions of git installed. But it works on my Linux and his
msysgit, so it's obviously better than what we had before.
-OPATH=$PATH
-PATH=$(git --exec-path):$PATH
+PATH=$PATH:$(git --exec-path)
. git-sh-setup
-PATH=$OPATH # apparently needed for some versions of msysgit
First of all, I disagree with Gianluca's reading of the documentation:
- I haven't gone back to read what the documentation said in 2009, but
in my reading of the 2021 documentation is that it includes "$(git
--exec-path)/" in the synopsis for illustrative purposes, not to say
it's the proper way.
- After being executed by `git`, the git exec path should be the very
first entry in PATH, so it shouldn't matter.
- None of the scripts that are part of git do it that way.
But secondly, the root reason for fussing with PATH seems to be that
Avery didn't know that he needs to set GIT_EXEC_PATH if he's going to
use git from the source directory without installing.
And finally, Evan's issue is clearly just a bug in msysgit. I assume
that msysgit has since fixed the issue, and also msysgit has been
deprecated for 6 years now, so let's drop the workaround for it.
So, remove the line fussing with PATH. However, since subtree *is* in
'contrib/' and it might get installed in funny ways by users
after-the-fact, add a sanity check to the top of the script, checking
that it is installed correctly.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"$*" is for when you want to concatenate the args together,
whitespace-separated; and "$@" is for when you want them to be separate
strings.
There are several places in subtree that erroneously use $@ when
concatenating args together into an error message.
For instance, if the args are argv[1]="dead" and argv[2]="beef", then
the line
die "You must provide exactly one revision. Got: '$@'"
surely intends to call 'die' with the argument
argv[1]="You must provide exactly one revision. Got: 'dead beef'"
however, because the line used $@ instead of $*, it will actually call
'die' with the arguments
argv[1]="You must provide exactly one revision. Got: 'dead"
argv[2]="beef'"
This isn't a big deal, because 'die' concatenates its arguments together
anyway (using "$*"). But that doesn't change the fact that it was a
mistake to use $@ instead of $*, even though in the end $@ still ended
up doing the right thing.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it painfully obvious when reading the code which variables are
direct parsings of command line arguments.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
subtree currently defines its own `say` implementation, rather than
using git-sh-setups's implementation. Change that, don't re-invent the
wheel.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of writing a slow `rev_is_descendant_of_branch $a $b` function
in shell, just use the fast `git merge-base --is-ancestor $b $a`.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suport for Git versions older than 1.7.0 (older than February 2010) was
nice to have when git-subtree lived out-of-tree. But now that it lives
in git.git, it's not necessary to keep around. While it's technically
in contrib, with the standard 'git' packages for common systems
(including Arch Linux and macOS) including git-subtree, it seems
vanishingly likely to me that people are separately installing
git-subtree from git.git alongside an older 'git' install (although it
also seems vanishingly likely that people are still using >11 year old
git installs).
Not that there's much reason to remove it either, it's not much code,
and none of my changes depend on a newer git (to my knowledge, anyway;
I'm not actually testing against older git). I just figure it's an easy
piece of fat to trim, in the journey to making the whole thing easier to
hack on.
"Ignore space change" is probably helpful when viewing this diff.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ensure that every $(subshell) that calls a function (as opposed to an
external executable) is followed by `|| exit $?`. Similarly, ensure that
every `cmd | while read; do ... done` loop is followed by `|| exit $?`.
Both of those constructs mean that it can miss `die` calls, and keep
running when it shouldn't.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shove all of the loose code inside of a main() function.
This comes down to personal preference more than anything else. A
preference that I've developed over years of maintaining large Bash
scripts, but still a mere personal preference.
In this specific case, it's also moving the `set -- -h`, the `git
rev-parse --parseopt`, and the `. git-sh-setup` to be closer to all
the rest of the argument parsing, which is a readability win on its
own, IMO.
"Ignore space change" is probably helpful when viewing this diff.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'pull' and 'push' subcommands deserve their own sections in the tests.
Add some basic tests for them.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a dumb test, but it's surprisingly easy to break.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7900-subtree.sh defines a helper function named last_commit_message.
However, it only returns the subject line of the commit message, not the
entire commit message. So rename it, to make the name less confusing.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As far as I can tell, this test isn't actually testing anything, because
someone forgot to tack on `--name-only` to `git log`. This seems to
have been the case since the test was first written, back in fa16ab36ad
("test.sh: make sure no commit changes more than one file at a time.",
2009-04-26), unless `git log` used to do that by default and didn't need
the flag back then?
Convincing myself that it's not actually testing anything was tricky,
the code is a little hard to reason about. It can be made a lot simpler
if instead of trying to parse all of the info from a single `git log`,
we're OK calling `git log` from inside of a loop. And it's my opinion
that tests are not the place for clever optimized code.
So, fix and simplify the test, so that it's actually testing something
and is simpler to reason about.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7900-subtree.sh defines its own `check_equal A B` function, instead of
just using `test A = B` like all of the other tests. Don't be special,
get rid of `check_equal` in favor of `test`.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's unclear what the purpose of t7900-subtree.sh's
`subtree_test_create_repo` helper function is. It wraps test-lib.sh's,
`test_create_repo` but follows that up by setting log.date=relative. Why
does it set log.date=relative?
My first guess was that at one point the tests required that, but no
longer do, and that the function is now vestigial. I even wrote a patch
to get rid of it and was moments away from `git send-email`ing it.
However, by chance when looking for something else in the history, I
discovered the true reason, from e7aac44ed2 (contrib/subtree: ignore
log.date configuration, 2015-07-21). It's testing that setting
log.date=relative doesn't break `git subtree`, as at one point in the past
that did break `git subtree`.
So, add a comment about this, to avoid future such confusion.
And while at it, go ahead and (1) touch up the function to avoid a
pointless subshell and (2) update the one test that didn't use it.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The formatting in t7900-subtree.sh isn't even consistent throughout the
file. Fix that; make it consistent throughout the file.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test-lib.sh's `test_count`, instead instead of having
t7900-subtree.sh do its own book-keeping with `subtree_test_count` that
has to be explicitly incremented by calling `next_test`.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the tests had been converted to support
`GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`, but `contrib/subtree/t/`
hadn't.
Convert it. Most of the mentions of 'master' can just be replaced with
'HEAD'.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running `make -C contrib/subtree/ test` creates a `git-subtree` executable
in the root of the repo. Add it to the .gitignore so that anyone hacking
on subtree won't have to deal with that noise.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git repack -A -d` is run in a partial clone, `pack-objects`
is invoked twice: once to repack all promisor objects, and once to
repack all non-promisor objects. The latter `pack-objects` invocation
is with --exclude-promisor-objects and --unpack-unreachable, which
loosens all objects unused during this invocation. Unfortunately,
this includes promisor objects.
Because the -d argument to `git repack` subsequently deletes all loose
objects also in packs, these just-loosened promisor objects will be
immediately deleted. However, this extra disk churn is unnecessary in
the first place. For example, in a newly-cloned partial repo that
filters all blob objects (e.g. `--filter=blob:none`), `repack` ends up
unpacking all trees and commits into the filesystem because every
object, in this particular case, is a promisor object. Depending on
the repo size, this increases the disk usage considerably: In my copy
of the linux.git, the object directory peaked 26GB of more disk usage.
In order to avoid this extra disk churn, pass the names of the promisor
packfiles as --keep-pack arguments to the second invocation of
`pack-objects`. This informs `pack-objects` that the promisor objects
are already in a safe packfile and, therefore, do not need to be
loosened.
For testing, we need to validate whether any object was loosened.
However, the "evidence" (loosened objects) is deleted during the
process which prevents us from inspecting the object directory.
Instead, let's teach `pack-objects` to count loosened objects and
emit via trace2 thus allowing inspecting the debug events after the
process is finished. This new event is used on the added regression
test.
Lastly, add a new perf test to evaluate the performance impact
made by this changes (tested on git.git):
Test HEAD^ HEAD
----------------------------------------------------------
5600.3: gc 134.38(41.93+90.95) 7.80(6.72+1.35) -94.2%
For a bigger repository, such as linux.git, the improvement is
even bigger:
Test HEAD^ HEAD
-------------------------------------------------------------------
5600.3: gc 6833.00(918.07+3162.74) 268.79(227.02+39.18) -96.1%
These improvements are particular big because every object in the
newly-cloned partial repository is a promisor object.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From the documentation for generating patch text with diff-related
commands, refer to the documentation for the diff attribute.
This attribute influences the way that patches are generated, but this
was previously not mentioned in e.g., the git-diff manpage.
Signed-off-by: Peter Oliver <git@mavit.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_pathspec() populates pathspec, hence we need to clear it once it's
no longer needed. seen is xcalloc'd within the same function and
likewise needs to be freed once its no longer needed.
cmd_rm() has multiple early returns, therefore we need to clear or free
as soon as this data is no longer needed, as opposed to doing a cleanup
at the end.
LSAN output from t0020:
Direct leak of 112 byte(s) in 1 object(s) allocated from:
#0 0x49a85d in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0x9ac0a4 in do_xmalloc wrapper.c:41:8
#2 0x9ac07a in xmalloc wrapper.c:62:9
#3 0x873277 in parse_pathspec pathspec.c:582:2
#4 0x646ffa in cmd_rm builtin/rm.c:266:2
#5 0x4cd91d in run_builtin git.c:467:11
#6 0x4cb5f3 in handle_builtin git.c:719:3
#7 0x4ccf47 in run_argv git.c:808:4
#8 0x4caf49 in cmd_main git.c:939:19
#9 0x69dc0e in main common-main.c:52:11
#10 0x7f948825b349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 65 byte(s) in 1 object(s) allocated from:
#0 0x49ab79 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x9ac2a6 in xrealloc wrapper.c:126:8
#2 0x93b14d in strbuf_grow strbuf.c:98:2
#3 0x93ccf6 in strbuf_vaddf strbuf.c:392:3
#4 0x93f726 in xstrvfmt strbuf.c:979:2
#5 0x93f8b3 in xstrfmt strbuf.c:989:8
#6 0x92ad8a in prefix_path_gently setup.c:115:15
#7 0x873a8d in init_pathspec_item pathspec.c:439:11
#8 0x87334f in parse_pathspec pathspec.c:589:3
#9 0x646ffa in cmd_rm builtin/rm.c:266:2
#10 0x4cd91d in run_builtin git.c:467:11
#11 0x4cb5f3 in handle_builtin git.c:719:3
#12 0x4ccf47 in run_argv git.c:808:4
#13 0x4caf49 in cmd_main git.c:939:19
#14 0x69dc0e in main common-main.c:52:11
#15 0x7f948825b349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 15 byte(s) in 1 object(s) allocated from:
#0 0x486834 in strdup ../projects/compiler-rt/lib/asan/asan_interceptors.cpp:452:3
#1 0x9ac048 in xstrdup wrapper.c:29:14
#2 0x873ba2 in init_pathspec_item pathspec.c:468:20
#3 0x87334f in parse_pathspec pathspec.c:589:3
#4 0x646ffa in cmd_rm builtin/rm.c:266:2
#5 0x4cd91d in run_builtin git.c:467:11
#6 0x4cb5f3 in handle_builtin git.c:719:3
#7 0x4ccf47 in run_argv git.c:808:4
#8 0x4caf49 in cmd_main git.c:939:19
#9 0x69dc0e in main common-main.c:52:11
#10 0x7f948825b349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 1 byte(s) in 1 object(s) allocated from:
#0 0x49a9d2 in calloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0x9ac392 in xcalloc wrapper.c:140:8
#2 0x647108 in cmd_rm builtin/rm.c:294:9
#3 0x4cd91d in run_builtin git.c:467:11
#4 0x4cb5f3 in handle_builtin git.c:719:3
#5 0x4ccf47 in run_argv git.c:808:4
#6 0x4caf49 in cmd_main git.c:939:19
#7 0x69dbfe in main common-main.c:52:11
#8 0x7f4fac1b0349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
options.git_format_patch_opt can be populated during cmd_rebase's setup,
and will therefore leak on return. Although we could just UNLEAK all of
options, we choose to strbuf_release() the individual member, which matches
the existing pattern (where we're freeing invidual members of options).
Leak found when running t0021:
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x49ab79 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x9ac296 in xrealloc wrapper.c:126:8
#2 0x93b13d in strbuf_grow strbuf.c:98:2
#3 0x93bd3a in strbuf_add strbuf.c:295:2
#4 0x60ae92 in strbuf_addstr strbuf.h:304:2
#5 0x605f17 in cmd_rebase builtin/rebase.c:1759:3
#6 0x4cd91d in run_builtin git.c:467:11
#7 0x4cb5f3 in handle_builtin git.c:719:3
#8 0x4ccf47 in run_argv git.c:808:4
#9 0x4caf49 in cmd_main git.c:939:19
#10 0x69dbfe in main common-main.c:52:11
#11 0x7f66dae91349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 24 byte(s) leaked in 1 allocation(s).
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sorting might be a list allocated in ref_default_sorting() (in this case
it's a fixed single item list, which has nevertheless been xcalloc'd),
or it might be a list allocated in parse_opt_ref_sorting(). In either
case we could free these lists - but instead we UNLEAK as we're at the
end of cmd_for_each_ref. (There's no existing implementation of
clear_ref_sorting(), and writing a loop to free the list seems more
trouble than it's worth.)
filter.with_commit/no_commit are populated via
OPT_CONTAINS/OPT_NO_CONTAINS, both of which create new entries via
parse_opt_commits(), and also need to be free'd or UNLEAK'd. Because
free_commit_list() already exists, we choose to use that over an UNLEAK.
LSAN output from t0041:
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x49a9d2 in calloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0x9ac252 in xcalloc wrapper.c:140:8
#2 0x8a4a55 in ref_default_sorting ref-filter.c:2486:32
#3 0x56c6b1 in cmd_for_each_ref builtin/for-each-ref.c:72:13
#4 0x4cd91d in run_builtin git.c:467:11
#5 0x4cb5f3 in handle_builtin git.c:719:3
#6 0x4ccf47 in run_argv git.c:808:4
#7 0x4caf49 in cmd_main git.c:939:19
#8 0x69dabe in main common-main.c:52:11
#9 0x7f2bdc570349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x49a85d in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0x9abf54 in do_xmalloc wrapper.c:41:8
#2 0x9abf2a in xmalloc wrapper.c:62:9
#3 0x717486 in commit_list_insert commit.c:540:33
#4 0x8644cf in parse_opt_commits parse-options-cb.c:98:2
#5 0x869bb5 in get_value parse-options.c:181:11
#6 0x8677dc in parse_long_opt parse-options.c:378:10
#7 0x8659bd in parse_options_step parse-options.c:817:11
#8 0x867fcd in parse_options parse-options.c:870:10
#9 0x56c62b in cmd_for_each_ref builtin/for-each-ref.c:59:2
#10 0x4cd91d in run_builtin git.c:467:11
#11 0x4cb5f3 in handle_builtin git.c:719:3
#12 0x4ccf47 in run_argv git.c:808:4
#13 0x4caf49 in cmd_main git.c:939:19
#14 0x69dabe in main common-main.c:52:11
#15 0x7f2bdc570349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mailinfo.p_hdr_info/s_hdr_info are null-terminated lists of strbuf's,
with entries pointing either to NULL or an allocated strbuf. Therefore
we need to free those strbuf's (and not just the data they contain)
whenever we're done with a given entry. (See handle_header() where those
new strbufs are malloc'd.)
Once we no longer need the list (and not just its entries) we can switch
over to strbuf_list_free() instead of manually iterating over the list,
which takes care of those additional details for us. We can only do this
in clear_mailinfo() - in handle_commit_message() we are only clearing the
array contents but want to reuse the array itself, hence we can't use
strbuf_list_free() there.
However, strbuf_list_free() cannot handle a NULL input, and the lists we
are freeing might be NULL. Therefore we add a NULL check in
strbuf_list_free() to make it safe to use with a NULL input (which is a
pattern used by some of the other *_free() functions around git).
Leak output from t0023:
Direct leak of 72 byte(s) in 3 object(s) allocated from:
#0 0x49a85d in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0x9ac9f4 in do_xmalloc wrapper.c:41:8
#2 0x9ac9ca in xmalloc wrapper.c:62:9
#3 0x7f6cf7 in handle_header mailinfo.c:205:10
#4 0x7f5abf in check_header mailinfo.c:583:4
#5 0x7f5524 in mailinfo mailinfo.c:1197:3
#6 0x4dcc95 in parse_mail builtin/am.c:1167:6
#7 0x4d9070 in am_run builtin/am.c:1732:12
#8 0x4d5b7a in cmd_am builtin/am.c:2398:3
#9 0x4cd91d in run_builtin git.c:467:11
#10 0x4cb5f3 in handle_builtin git.c:719:3
#11 0x4ccf47 in run_argv git.c:808:4
#12 0x4caf49 in cmd_main git.c:939:19
#13 0x69e43e in main common-main.c:52:11
#14 0x7fc1fadfa349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 72 byte(s) leaked in 3 allocation(s).
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
add_pending_object() populates rev.pending, we need to take care of
clearing it once we're done.
This code is run close to the end of a checkout, therefore this leak
seems like it would have very little impact. See also LSAN output
from t0020 below:
Direct leak of 2048 byte(s) in 1 object(s) allocated from:
#0 0x49ab79 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x9acc46 in xrealloc wrapper.c:126:8
#2 0x83e3a3 in add_object_array_with_path object.c:337:3
#3 0x8f672a in add_pending_object_with_path revision.c:329:2
#4 0x8eaeab in add_pending_object_with_mode revision.c:336:2
#5 0x8eae9d in add_pending_object revision.c:342:2
#6 0x5154a0 in show_local_changes builtin/checkout.c:602:2
#7 0x513b00 in merge_working_tree builtin/checkout.c:979:3
#8 0x512cb3 in switch_branches builtin/checkout.c:1242:9
#9 0x50f8de in checkout_branch builtin/checkout.c:1646:9
#10 0x50ba12 in checkout_main builtin/checkout.c:2003:9
#11 0x5086c0 in cmd_checkout builtin/checkout.c:2055:8
#12 0x4cd91d in run_builtin git.c:467:11
#13 0x4cb5f3 in handle_builtin git.c:719:3
#14 0x4ccf47 in run_argv git.c:808:4
#15 0x4caf49 in cmd_main git.c:939:19
#16 0x69e43e in main common-main.c:52:11
#17 0x7f5dd1d50349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 2048 byte(s) leaked in 1 allocation(s).
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_pathspec() allocates new memory into pathspec, therefore we need
to free it when we're done.
An UNLEAK would probably be just as good here - but clear_pathspec() is
not much more work so we might as well use it. check_ignore() is either
called once directly from cmd_check_ignore() (in which case the leak
really doesnt matter), or it can be called multiple times in a loop from
check_ignore_stdin_paths(), in which case we're potentially leaking
multiple times - but even in this scenario the leak is so small as to
have no real consequence.
Found while running t0008:
Direct leak of 112 byte(s) in 1 object(s) allocated from:
#0 0x49a85d in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0x9aca44 in do_xmalloc wrapper.c:41:8
#2 0x9aca1a in xmalloc wrapper.c:62:9
#3 0x873c17 in parse_pathspec pathspec.c:582:2
#4 0x503eb8 in check_ignore builtin/check-ignore.c:90:2
#5 0x5038af in cmd_check_ignore builtin/check-ignore.c:190:17
#6 0x4cd91d in run_builtin git.c:467:11
#7 0x4cb5f3 in handle_builtin git.c:719:3
#8 0x4ccf47 in run_argv git.c:808:4
#9 0x4caf49 in cmd_main git.c:939:19
#10 0x69e43e in main common-main.c:52:11
#11 0x7f18bb0dd349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 65 byte(s) in 1 object(s) allocated from:
#0 0x49ab79 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x9acc46 in xrealloc wrapper.c:126:8
#2 0x93baed in strbuf_grow strbuf.c:98:2
#3 0x93d696 in strbuf_vaddf strbuf.c:392:3
#4 0x9400c6 in xstrvfmt strbuf.c:979:2
#5 0x940253 in xstrfmt strbuf.c:989:8
#6 0x92b72a in prefix_path_gently setup.c:115:15
#7 0x87442d in init_pathspec_item pathspec.c:439:11
#8 0x873cef in parse_pathspec pathspec.c:589:3
#9 0x503eb8 in check_ignore builtin/check-ignore.c:90:2
#10 0x5038af in cmd_check_ignore builtin/check-ignore.c:190:17
#11 0x4cd91d in run_builtin git.c:467:11
#12 0x4cb5f3 in handle_builtin git.c:719:3
#13 0x4ccf47 in run_argv git.c:808:4
#14 0x4caf49 in cmd_main git.c:939:19
#15 0x69e43e in main common-main.c:52:11
#16 0x7f18bb0dd349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 2 byte(s) in 1 object(s) allocated from:
#0 0x486834 in strdup ../projects/compiler-rt/lib/asan/asan_interceptors.cpp:452:3
#1 0x9ac9e8 in xstrdup wrapper.c:29:14
#2 0x874542 in init_pathspec_item pathspec.c:468:20
#3 0x873cef in parse_pathspec pathspec.c:589:3
#4 0x503eb8 in check_ignore builtin/check-ignore.c:90:2
#5 0x5038af in cmd_check_ignore builtin/check-ignore.c:190:17
#6 0x4cd91d in run_builtin git.c:467:11
#7 0x4cb5f3 in handle_builtin git.c:719:3
#8 0x4ccf47 in run_argv git.c:808:4
#9 0x4caf49 in cmd_main git.c:939:19
#10 0x69e43e in main common-main.c:52:11
#11 0x7f18bb0dd349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 179 byte(s) leaked in 3 allocation(s).
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prefix_filename() returns newly allocated memory, and strbuf_addstr()
doesn't take ownership of its inputs. Therefore we have to make sure to
store and free prefix_filename()'s result.
As this leak is in cmd_bugreport(), we could just as well UNLEAK the
prefix - but there's no good reason not to just free it properly. This
leak was found while running t0091, see output below:
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x49ab79 in realloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x9acc66 in xrealloc wrapper.c:126:8
#2 0x93baed in strbuf_grow strbuf.c:98:2
#3 0x93c6ea in strbuf_add strbuf.c:295:2
#4 0x69f162 in strbuf_addstr ./strbuf.h:304:2
#5 0x69f083 in prefix_filename abspath.c:277:2
#6 0x4fb275 in cmd_bugreport builtin/bugreport.c:146:9
#7 0x4cd91d in run_builtin git.c:467:11
#8 0x4cb5f3 in handle_builtin git.c:719:3
#9 0x4ccf47 in run_argv git.c:808:4
#10 0x4caf49 in cmd_main git.c:939:19
#11 0x69df9e in main common-main.c:52:11
#12 0x7f523a987349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
real_ref was previously populated by dwim_ref(), which allocates new
memory. We need to make sure to free real_ref when discarding it.
(real_ref is already being freed at the end of create_branch() - but
if we discard it early then it will leak.)
This fixes the following leak found while running t0002-t0099:
Direct leak of 5 byte(s) in 1 object(s) allocated from:
#0 0x486954 in strdup /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_interceptors.cpp:452:3
#1 0xdd6484 in xstrdup wrapper.c:29:14
#2 0xc0f658 in expand_ref refs.c:671:12
#3 0xc0ecf1 in repo_dwim_ref refs.c:644:22
#4 0x8b1184 in dwim_ref ./refs.h:162:9
#5 0x8b0b02 in create_branch branch.c:284:10
#6 0x550cbb in update_refs_for_switch builtin/checkout.c:1046:4
#7 0x54e275 in switch_branches builtin/checkout.c:1274:2
#8 0x548828 in checkout_branch builtin/checkout.c:1668:9
#9 0x541306 in checkout_main builtin/checkout.c:2025:9
#10 0x5395fa in cmd_checkout builtin/checkout.c:2077:8
#11 0x4d02a8 in run_builtin git.c:467:11
#12 0x4cbfe9 in handle_builtin git.c:719:3
#13 0x4cf04f in run_argv git.c:808:4
#14 0x4cb85a in cmd_main git.c:939:19
#15 0x820cf6 in main common-main.c:52:11
#16 0x7f30bd9dd349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fill_bloom_key() allocates memory into bloom_key, we need to clean that
up once the key is no longer needed.
This leak was found while running t0002-t0099. Although this leak is
happening in code being called from a test-helper, the same code is also
used in various locations around git, and can therefore happen during
normal usage too. Gabor's analysis shows that peak-memory usage during
'git commit-graph write' is reduced on the order of 10% for a selection
of larger repos (along with an even larger reduction if we override
modified path bloom filter limits):
https://lore.kernel.org/git/20210411072651.GF2947267@szeder.dev/
LSAN output:
Direct leak of 308 byte(s) in 11 object(s) allocated from:
#0 0x49a5e2 in calloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0x6f4032 in xcalloc wrapper.c:140:8
#2 0x4f2905 in fill_bloom_key bloom.c:137:28
#3 0x4f34c1 in get_or_compute_bloom_filter bloom.c:284:4
#4 0x4cb484 in get_bloom_filter_for_commit t/helper/test-bloom.c:43:11
#5 0x4cb072 in cmd__bloom t/helper/test-bloom.c:97:3
#6 0x4ca7ef in cmd_main t/helper/test-tool.c:121:11
#7 0x4caace in main common-main.c:52:11
#8 0x7f798af95349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 308 byte(s) leaked in 11 allocation(s).
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
common_prefix() returns a new string, which we store in max_prefix -
this string needs to be freed to avoid a leak. This leak is happening
in cmd_ls_files, hence is of no real consequence - an UNLEAK would be
just as good, but we might as well free the string properly.
Leak found while running t0002, see output below:
Direct leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x49a85d in malloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0x9ab1b4 in do_xmalloc wrapper.c:41:8
#2 0x9ab248 in do_xmallocz wrapper.c:75:8
#3 0x9ab22a in xmallocz wrapper.c:83:9
#4 0x9ab2d7 in xmemdupz wrapper.c:99:16
#5 0x78d6a4 in common_prefix dir.c:191:15
#6 0x5aca48 in cmd_ls_files builtin/ls-files.c:669:16
#7 0x4cd92d in run_builtin git.c:453:11
#8 0x4cb5fa in handle_builtin git.c:704:3
#9 0x4ccf57 in run_argv git.c:771:4
#10 0x4caf49 in cmd_main git.c:902:19
#11 0x69ce2e in main common-main.c:52:11
#12 0x7f64d4d94349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rev.prune_data is populated (in multiple functions) via copy_pathspec,
and therefore needs to be cleared after running the diff in those
functions.
rev(_info).pending is populated indirectly via setup_revisions, and also
needs to be cleared once diffing is done.
These leaks were found while running t0008 or t0021. The rev.prune_data
leaks are small (80B) but noisy, hence I won't bother including their
logs - the rev.pending leaks are bigger, and can happen early in the
course of other commands, and therefore possibly more valuable to fix -
see example log from a rebase below:
Direct leak of 2048 byte(s) in 1 object(s) allocated from:
#0 0x49ab79 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x9ac2a6 in xrealloc wrapper.c:126:8
#2 0x83da03 in add_object_array_with_path object.c:337:3
#3 0x8f5d8a in add_pending_object_with_path revision.c:329:2
#4 0x8ea50b in add_pending_object_with_mode revision.c:336:2
#5 0x8ea4fd in add_pending_object revision.c:342:2
#6 0x8ea610 in add_head_to_pending revision.c:354:2
#7 0x9b55f5 in has_uncommitted_changes wt-status.c:2474:2
#8 0x9b58c4 in require_clean_work_tree wt-status.c:2553:6
#9 0x606bcc in cmd_rebase builtin/rebase.c:1970:6
#10 0x4cd91d in run_builtin git.c:467:11
#11 0x4cb5f3 in handle_builtin git.c:719:3
#12 0x4ccf47 in run_argv git.c:808:4
#13 0x4caf49 in cmd_main git.c:939:19
#14 0x69dc0e in main common-main.c:52:11
#15 0x7f2d18909349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 5 byte(s) in 1 object(s) allocated from:
#0 0x486834 in strdup ../projects/compiler-rt/lib/asan/asan_interceptors.cpp:452:3
#1 0x9ac048 in xstrdup wrapper.c:29:14
#2 0x83da8d in add_object_array_with_path object.c:349:17
#3 0x8f5d8a in add_pending_object_with_path revision.c:329:2
#4 0x8ea50b in add_pending_object_with_mode revision.c:336:2
#5 0x8ea4fd in add_pending_object revision.c:342:2
#6 0x8ea610 in add_head_to_pending revision.c:354:2
#7 0x9b55f5 in has_uncommitted_changes wt-status.c:2474:2
#8 0x9b58c4 in require_clean_work_tree wt-status.c:2553:6
#9 0x606bcc in cmd_rebase builtin/rebase.c:1970:6
#10 0x4cd91d in run_builtin git.c:467:11
#11 0x4cb5f3 in handle_builtin git.c:719:3
#12 0x4ccf47 in run_argv git.c:808:4
#13 0x4caf49 in cmd_main git.c:939:19
#14 0x69dc0e in main common-main.c:52:11
#15 0x7f2d18909349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 2053 byte(s) leaked in 2 allocation(s).
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
limit_list() iterates over the original revs->commits list, and consumes
many of its entries via pop_commit. However we might stop iterating over
the list early (e.g. if we realise that the rest of the list is
uninteresting). If we do stop iterating early, list will be pointing to
the unconsumed portion of revs->commits - and we need to free this list
to avoid a leak. (revs->commits itself will be an invalid pointer: it
will have been free'd during the first pop_commit.)
However the list pointer is later reused to iterate over our new list,
but only for the limiting_can_increase_treesame() branch. We therefore
need to introduce a new variable for that branch - and while we're here
we can rename the original list to original_list as that makes its
purpose more obvious.
This leak was found while running t0090. It's not likely to be very
impactful, but it can happen quite early during some checkout
invocations, and hence seems to be worth fixing:
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x49a85d in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0x9ac084 in do_xmalloc wrapper.c:41:8
#2 0x9ac05a in xmalloc wrapper.c:62:9
#3 0x7175d6 in commit_list_insert commit.c:540:33
#4 0x71800f in commit_list_insert_by_date commit.c:604:9
#5 0x8f8d2e in process_parents revision.c:1128:5
#6 0x8f2f2c in limit_list revision.c:1418:7
#7 0x8f210e in prepare_revision_walk revision.c:3577:7
#8 0x514170 in orphaned_commit_warning builtin/checkout.c:1185:6
#9 0x512f05 in switch_branches builtin/checkout.c:1250:3
#10 0x50f8de in checkout_branch builtin/checkout.c:1646:9
#11 0x50ba12 in checkout_main builtin/checkout.c:2003:9
#12 0x5086c0 in cmd_checkout builtin/checkout.c:2055:8
#13 0x4cd91d in run_builtin git.c:467:11
#14 0x4cb5f3 in handle_builtin git.c:719:3
#15 0x4ccf47 in run_argv git.c:808:4
#16 0x4caf49 in cmd_main git.c:939:19
#17 0x69dc0e in main common-main.c:52:11
#18 0x7faaabd0e349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 48 byte(s) in 3 object(s) allocated from:
#0 0x49a85d in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0x9ac084 in do_xmalloc wrapper.c:41:8
#2 0x9ac05a in xmalloc wrapper.c:62:9
#3 0x717de6 in commit_list_append commit.c:1609:35
#4 0x8f1f9b in prepare_revision_walk revision.c:3554:12
#5 0x514170 in orphaned_commit_warning builtin/checkout.c:1185:6
#6 0x512f05 in switch_branches builtin/checkout.c:1250:3
#7 0x50f8de in checkout_branch builtin/checkout.c:1646:9
#8 0x50ba12 in checkout_main builtin/checkout.c:2003:9
#9 0x5086c0 in cmd_checkout builtin/checkout.c:2055:8
#10 0x4cd91d in run_builtin git.c:467:11
#11 0x4cb5f3 in handle_builtin git.c:719:3
#12 0x4ccf47 in run_argv git.c:808:4
#13 0x4caf49 in cmd_main git.c:939:19
#14 0x69dc0e in main common-main.c:52:11
#15 0x7faaabd0e349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that all code paths correctly set the hash algorithm member of
struct object_id, write an object's hex representation using the hash
algorithm member embedded in it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are numerous places in the codebase where we assume we can
initialize data by zeroing all its bytes. However, when we do that with
a struct object_id, it leaves the structure with a zero value for the
algorithm, which is invalid.
We could forbid this pattern and require that all struct object_id
instances be initialized using oidclr, but this seems burdensome and
it's unnatural to most C programmers. Instead, if the algorithm is
zero, assume we wanted to use the default hash algorithm instead.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use struct object_id for the names of objects. It isn't intended to
be used for other hash values that don't name objects such as the pack
hash.
Because struct object_id will soon need to have its algorithm member
set, using it in this code path would mean that we didn't set that
member, only the hash member, which would result in a crash. For both
of these reasons, switch to using an unsigned char array of size
GIT_MAX_RAWSZ.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idea behind struct object_id is that it is supposed to represent the
identifier of a standard Git object or a special pseudo-object like the
all-zeros object ID. In this case, we have file hashes, which, while
similar, are distinct from the identifiers of objects.
Switch these code paths to use an unsigned char array. This is both
more logically consistent and it means that we need not set the
algorithm identifier for the struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In most cases, when we load the hash of an object into a struct
object_id, we load it using one of the oid* or *_oid_hex functions.
However, for git show-index, we read it in directly using fread. As a
consequence, set the algorithm correctly so the objects can be used
correctly both now and in the future.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Up until recently, object IDs did not have an algorithm member, only a
hash. Consequently, it was possible to share one null (all-zeros)
object ID among all hash algorithms. Now that we're going to be
handling objects from multiple hash algorithms, it's important to make
sure that all object IDs have a correct algorithm field.
Introduce a per-algorithm null OID, and add it to struct hash_algo.
Introduce a wrapper function as well, and use it everywhere we used to
use the null_oid constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that struct object_id has an algorithm field, we should populate it.
This will allow us to handle object IDs in any supported algorithm and
distinguish between them. Ensure that the field is written whenever we
write an object ID by storing it explicitly every time we write an
object. Set values for the empty blob and tree values as well.
In addition, use the algorithm field to compare object IDs. Note that
because we zero-initialize struct object_id in many places throughout
the codebase, we default to the default algorithm in cases where the
algorithm field is zero rather than explicitly initialize all of those
locations.
This leads to a branch on every comparison, but the alternative is to
compare the entire buffer each time and padding the buffer for SHA-1.
That alternative ranges up to 3.9% worse than this approach on the perf
t0001, t1450, and t1451.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we need our instances of struct object_id to be zero padded, we
can no longer cast unsigned char buffers to be pointers to struct
object_id. This file reads data out of the pack objects and then
inserts it directly into a linked list item which is a pointer to struct
object_id. Instead, let's have the linked list item hold its own struct
object_id and copy the data into it.
In addition, since these are not really pointers to struct object_id,
stop passing them around as such, and call them what they really are:
pointers to unsigned char.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we're hashing a value which is going to be an object ID, we want to
zero-pad that value if necessary. To do so, use the final_oid_fn
instead of the final_fn anytime we're going to create an object ID to
ensure we perform this operation.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To avoid the penalty of having to branch in hash comparison functions,
we'll want to always compare the full hash member in a struct object_id,
which will require that SHA-1 object IDs be zero-padded. To do so, add
a function which finalizes a hash context and writes it into an object
ID that performs this padding.
Move the definition of struct object_id and the constant definitions
higher up so we they are available for us to use.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In most places in the codebase, we use oidread to properly read an
object ID into a struct object_id. However, in the HTTP code, we end up
needing to parse a loose object path with a slash in it, so we can't do
that. Let's instead explicitly set the algorithm in this function so we
can rely on it in the future.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the future, we'll want oidread to automatically set the hash
algorithm member for an object ID we read into it, so ensure we use
oidread instead of hashcpy everywhere we're copying a hash value into a
struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we're working with multiple hash algorithms in the same repo,
it's best if we label each object ID with its algorithm so we can
determine how to format a given object ID. Add a member called algo to
struct object_id.
Performance testing on object ID-heavy workloads doesn't reveal a clear
change in performance. Out of performance tests t0001 and t1450, there
are slight variations in performance both up and down, but all
measurements are within the margin of error.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the placeholders %ah and %ch to format author date and committer
date, like --date=human does, which provides more humanity date output.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the description for the --date/format equivalency tests added
in 466fb6742d (pretty: provide a strict ISO 8601 date format,
2014-08-29) and 0df621172d (pretty: provide short date format,
2019-11-19) to be more meaningful.
This allows us to reword the comment added in the former commit to
refer to both tests, and any other future test, such as the in-flight
--date=human format being proposed in [1].
1. http://lore.kernel.org/git/pull.939.v2.git.1619275340051.gitgitgadget@gmail.com
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a needlessly complex test for the %aI/%cI date
formats (iso-strict) added in 466fb6742d (pretty: provide a strict
ISO 8601 date format, 2014-08-29) to instead use the same pattern used
to test %as/%cs since 0df621172d (pretty: provide short date format,
2019-11-19).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The $subcommand case statement in _git_stash() is quite repetitive.
Consolidate the cases together into one catch-all case to reduce the
repetition.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the introduction of the $__git_cmd_idx variable in e94fb44042
(git-completion.bash: pass $__git_subcommand_idx from __git_main(),
2021-03-24), completion functions were able to know the index at which
the git command is listed, allowing them to skip options that are given
to the underlying git itself, not the corresponding command (e.g.
`-C asdf` in `git -C asdf branch`).
While most of the changes here are self-explanatory, some bear further
explanation.
For the __git_find_on_cmdline() and __git_find_last_on_cmdline() pair of
functions, these functions are only ever called in the context of a git
command completion function. These functions will only care about words
after the command so we can safely ignore the words before this.
For _git_worktree(), this change is technically a no-op (once the
__git_find_last_on_cmdline change is also applied). It was in poor style
to have hard-coded on the index right after `worktree`. In case
`git worktree` were to ever learn to accept options, the current
situation would be inflexible.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In e94fb44042 (git-completion.bash: pass $__git_subcommand_idx from
__git_main(), 2021-03-24), the $__git_subcommand_idx variable was
introduced. Naming it after the index of the subcommand is needlessly
confusing as, when this variable is used, it is in the completion
functions for commands (e.g. _git_remote()) where for `git remote add`,
the `remote` is referred to as the command and `add` is referred to as
the subcommand.
Rename this variable so that it's obvious it's about git commands. While
we're at it, shorten up its name so that it's still readable without
being a handful to type.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to test whether the new GIT_CONFIG_SYSTEM environment variable
behaves as expected, we unset GIT_CONFIG_NOSYSTEM in one of our tests in
t1300. But because tests are not executed in a subshell, this unset
leaks into all subsequent tests and may thus cause them to fail in some
environments. These failures are easily reproducable with `make
prefix=/root test`.
Fix the issue by not using `sane_unset GIT_CONFIG_NOSYSTEM`, but instead
just manually add it to the environment of the two command invocations
which need it.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it is useful to get information of an object without having to
download it completely.
Add the "object-info" capability that lets the client ask for
object-related information with their full hexadecimal object names.
Only sizes are returned for now.
Signed-off-by: Bruno Albuquerque <bga@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The dependencies for config-list.h and command-list.h were broken
when the former was split out of the latter, which has been
corrected.
* sg/bugreport-fixes:
Makefile: add missing dependencies of 'config-list.h'
Documentation updates, with unrelated comment updates, too.
* ab/usage-error-docs:
api docs: document that BUG() emits a trace2 error event
api docs: document BUG() in api-error-handling.txt
usage.c: don't copy/paste the same comment three times
When "git pack-objects" makes a literal copy of a part of existing
packfile using the reachability bitmaps, its update to the progress
meter was broken.
* jk/pack-objects-bitmap-progress-fix:
pack-objects: update "nr_seen" progress based on pack-reused count
A bit of code clean-up and a lot of test clean-up around userdiff
area.
* ab/userdiff-tests:
blame tests: simplify userdiff driver test
blame tests: don't rely on t/t4018/ directory
userdiff: remove support for "broken" tests
userdiff tests: list builtin drivers via test-tool
userdiff tests: explicitly test "default" pattern
userdiff: add and use for_each_userdiff_driver()
userdiff style: normalize pascal regex declaration
userdiff style: declare patterns with consistent style
userdiff style: re-order drivers in alphabetical order
In e94fb44042 (git-completion.bash: pass $__git_subcommand_idx from
__git_main(), 2021-03-24), a line was introduced which contained
multiple statements. This is difficult to read so break it into multiple
lines.
While we're at it, follow this convention for the rest of the
__git_main() and break up lines that contain multiple statements.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
AFAICT parsing the output of `git diff --name-only master...feature`
is the intended way of programmatically getting the list of files
modified
by a feature branch. It is impossible to parse text unless you know what
encoding it is in. The output encoding of diff --name-only and
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we use `git for-each-ref`, every ref will allocate
its own output strbuf and error strbuf. But we can reuse
the final strbuf for each step ref's output. The error
buffer will also be reused, despite the fact that the git
will exit when `format_ref_array_item()` return a non-zero
value and output the contents of the error buffer.
The performance for `git for-each-ref` on the Git repository
itself with performance testing tool `hyperfine` changes from
23.7 ms ± 0.9 ms to 22.2 ms ± 1.0 ms. Optimization is relatively
minor.
At the same time, we apply this optimization to `git tag -l`
and `git branch -l`.
This approach is similar to the one used by 79ed0a5
(cat-file: use a single strbuf for all output, 2018-08-14)
to speed up the cat-file builtin.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inlining the exported function `show_ref_array_item()`,
which is not providing the right level of abstraction,
simplifies the API and can unlock improvements at the
former call sites.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to have git run in a fully controlled environment without any
misconfiguration, it may be desirable for users or scripts to override
global- and system-level configuration files. We already have a way of
doing this, which is to unset both HOME and XDG_CONFIG_HOME environment
variables and to set `GIT_CONFIG_NOGLOBAL=true`. This is quite kludgy,
and unsetting the first two variables likely has an impact on other
executables spawned by such a script.
The obvious way to fix this would be to introduce `GIT_CONFIG_NOGLOBAL`
as an equivalent to `GIT_CONFIG_NOSYSTEM`. But in the past, it has
turned out that this design is inflexible: we cannot test system-level
parsing of the git configuration in our test harness because there is no
way to change its location, so all tests run with `GIT_CONFIG_NOSYSTEM`
set.
Instead of doing the same mistake with `GIT_CONFIG_NOGLOBAL`, introduce
two new variables `GIT_CONFIG_GLOBAL` and `GIT_CONFIG_SYSTEM`:
- If unset, git continues to use the usual locations.
- If set to a specific path, we skip reading the normal
configuration files and instead take the path. By setting the path
to `/dev/null`, no configuration will be loaded for the respective
level.
This implements the usecase where we want to execute code in a sanitized
environment without any potential misconfigurations via `/dev/null`, but
is more flexible and allows for more usecases than simply adding
`GIT_CONFIG_NOGLOBAL`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's two callsites which assemble global config paths, once in the
config loading code and once in the git-config(1) builtin. We're about
to implement a way to override global config paths via an environment
variable which would require us to adjust both sites.
Unify both code paths into a single `git_global_config()` function which
returns both paths for `~/.gitconfig` and the XDG config file. This will
make the subsequent patch which introduces the new envvar easier to
implement.
No functional changes are expected from this patch.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git_etc_gitconfig()` function retrieves the system-level path of
the configuration file. We're about to introduce a way to override it
via an environment variable, at which point the name of this function
would start to become misleading.
Rename the function to `git_system_config()` as a preparatory step.
While at it, the function is also refactored to pass memory ownership to
the caller. This is done to better match semantics of
`git_global_config()`, which is going to be introduced in the next
commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When providing an object filter, it is currently impossible to also
filter provided items. E.g. when executing `git rev-list HEAD` , the
commit this reference points to will be treated as user-provided and is
thus excluded from the filtering mechanism. This makes it harder than
necessary to properly use the new `--filter=object:type` filter given
that even if the user wants to only see blobs, he'll still see commits
of provided references.
Improve this by introducing a new `--filter-provided-objects` option
to the git-rev-parse(1) command. If given, then all user-provided
references will be subject to filtering.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user has multiple objects filters specified, then this is
internally represented by having a "combined" filter. These combined
filters aren't yet supported by bitmap indices and can thus not be
accelerated.
Fix this by implementing support for these combined filters. The
implementation is quite trivial: when there's a combined filter, we
simply recurse into `filter_bitmap()` for all of the sub-filters.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The preceding commit has added a new object filter for git-rev-list(1)
which allows to filter objects by type. Implement the equivalent filter
for packfile bitmaps so that we can answer these queries fast.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While it already is possible to filter objects by some criteria in
git-rev-list(1), it is not yet possible to filter out only a specific
type of objects. This makes some filters less useful. The `blob:limit`
filter for example filters blobs such that only those which are smaller
than the given limit are returned. But it is unfit to ask only for these
smallish blobs, given that git-rev-list(1) will continue to print tags,
commits and trees.
Now that we have the infrastructure in place to also filter tags and
commits, we can improve this situation by implementing a new filter
which selects objects based on their type. Above query can thus
trivially be implemented with the following command:
$ git rev-list --objects --filter=object:type=blob \
--filter=blob:limit=200
Furthermore, this filter allows to optimize for certain other cases: if
for example only tags or commits have been selected, there is no need to
walk down trees.
The new filter is not yet supported in bitmaps. This is going to be
implemented in a subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make parallel checkout configurable by introducing two new settings:
checkout.workers and checkout.thresholdForParallelism. The first defines
the number of workers (where one means sequential checkout), and the
second defines the minimum number of entries to attempt parallel
checkout.
To decide the default value for checkout.workers, the parallel version
was benchmarked during three operations in the linux repo, with cold
cache: cloning v5.8, checking out v5.8 from v2.6.15 (checkout I) and
checking out v5.8 from v5.7 (checkout II). The four tables below show
the mean run times and standard deviations for 5 runs in: a local file
system on SSD, a local file system on HDD, a Linux NFS server, and
Amazon EFS (all on Linux). Each parallel checkout test was executed with
the number of workers that brings the best overall results in that
environment.
Local SSD:
Sequential 10 workers Speedup
Clone 8.805 s ± 0.043 s 3.564 s ± 0.041 s 2.47 ± 0.03
Checkout I 9.678 s ± 0.057 s 4.486 s ± 0.050 s 2.16 ± 0.03
Checkout II 5.034 s ± 0.072 s 3.021 s ± 0.038 s 1.67 ± 0.03
Local HDD:
Sequential 10 workers Speedup
Clone 32.288 s ± 0.580 s 30.724 s ± 0.522 s 1.05 ± 0.03
Checkout I 54.172 s ± 7.119 s 54.429 s ± 6.738 s 1.00 ± 0.18
Checkout II 40.465 s ± 2.402 s 38.682 s ± 1.365 s 1.05 ± 0.07
Linux NFS server (v4.1, on EBS, single availability zone):
Sequential 32 workers Speedup
Clone 240.368 s ± 6.347 s 57.349 s ± 0.870 s 4.19 ± 0.13
Checkout I 242.862 s ± 2.215 s 58.700 s ± 0.904 s 4.14 ± 0.07
Checkout II 65.751 s ± 1.577 s 23.820 s ± 0.407 s 2.76 ± 0.08
EFS (v4.1, replicated over multiple availability zones):
Sequential 32 workers Speedup
Clone 922.321 s ± 2.274 s 210.453 s ± 3.412 s 4.38 ± 0.07
Checkout I 1011.300 s ± 7.346 s 297.828 s ± 0.964 s 3.40 ± 0.03
Checkout II 294.104 s ± 1.836 s 126.017 s ± 1.190 s 2.33 ± 0.03
The above benchmarks show that parallel checkout is most effective on
repositories located on an SSD or over a distributed file system. For
local file systems on spinning disks, and/or older machines, the
parallelism does not always bring a good performance. For this reason,
the default value for checkout.workers is one, a.k.a. sequential
checkout.
To decide the default value for checkout.thresholdForParallelism,
another benchmark was executed in the "Local SSD" setup, where parallel
checkout showed to be beneficial. This time, we compared the runtime of
a `git checkout -f`, with and without parallelism, after randomly
removing an increasing number of files from the Linux working tree. The
"sequential fallback" column below corresponds to the executions where
checkout.workers was 10 but checkout.thresholdForParallelism was equal
to the number of to-be-updated files plus one (so that we end up writing
sequentially). Each test case was sampled 15 times, and each sample had
a randomly different set of files removed. Here are the results:
sequential fallback 10 workers speedup
10 files 772.3 ms ± 12.6 ms 769.0 ms ± 13.6 ms 1.00 ± 0.02
20 files 780.5 ms ± 15.8 ms 775.2 ms ± 9.2 ms 1.01 ± 0.02
50 files 806.2 ms ± 13.8 ms 767.4 ms ± 8.5 ms 1.05 ± 0.02
100 files 833.7 ms ± 21.4 ms 750.5 ms ± 16.8 ms 1.11 ± 0.04
200 files 897.6 ms ± 30.9 ms 730.5 ms ± 14.7 ms 1.23 ± 0.05
500 files 1035.4 ms ± 48.0 ms 677.1 ms ± 22.3 ms 1.53 ± 0.09
1000 files 1244.6 ms ± 35.6 ms 654.0 ms ± 38.3 ms 1.90 ± 0.12
2000 files 1488.8 ms ± 53.4 ms 658.8 ms ± 23.8 ms 2.26 ± 0.12
From the above numbers, 100 files seems to be a reasonable default value
for the threshold setting.
Note: Up to 1000 files, we observe a drop in the execution time of the
parallel code with an increase in the number of files. This is a rather
odd behavior, but it was observed in multiple repetitions. Above 1000
files, the execution time increases according to the number of files, as
one would expect.
About the test environments: Local SSD tests were executed on an
i7-7700HQ (4 cores with hyper-threading) running Manjaro Linux. Local
HDD tests were executed on an Intel(R) Xeon(R) E3-1230 (also 4 cores
with hyper-threading), HDD Seagate Barracuda 7200.14 SATA 3.1, running
Debian. NFS and EFS tests were executed on an Amazon EC2 c5n.xlarge
instance, with 4 vCPUs. The Linux NFS server was running on a m6g.large
instance with 2 vCPUSs and a 1 TB EBS GP2 volume. Before each timing,
the linux repository was removed (or checked out back to its previous
state), and `sync && sysctl vm.drop_caches=3` was executed.
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use multiple worker processes to distribute the queued entries and call
write_pc_item() in parallel for them. The items are distributed
uniformly in contiguous chunks. This minimizes the chances of two
workers writing to the same directory simultaneously, which could affect
performance due to lock contention in the kernel. Work stealing (or any
other format of re-distribution) is not implemented yet.
The protocol between the main process and the workers is quite simple.
They exchange binary messages packed in pkt-line format, and use
PKT-FLUSH to mark the end of input (from both sides). The main process
starts the communication by sending N pkt-lines, each corresponding to
an item that needs to be written. These packets contain all the
necessary information to load, smudge, and write the blob associated
with each item. Then it waits for the worker to send back N pkt-lines
containing the results for each item. The resulting packet must contain:
the identification number of the item that it refers to, the status of
the operation, and the lstat() data gathered after writing the file (iff
the operation was successful).
For now, checkout always uses a hardcoded value of 2 workers, only to
demonstrate that the parallel checkout framework correctly divides and
writes the queued entries. The next patch will add user configurations
and define a more reasonable default, based on tests with the said
settings.
Co-authored-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new interface allows us to enqueue some of the entries being
checked out to later uncompress them, apply in-process filters, and
write out the files in parallel. For now, the parallel checkout
machinery is enabled by default and there is no user configuration, but
run_parallel_checkout() just writes the queued entries in sequence
(without spawning additional workers). The next patch will actually
implement the parallelism and, later, we will make it configurable.
Note that, to avoid potential data races, not all entries are eligible
for parallel checkout. Also, paths that collide on disk (e.g.
case-sensitive paths in case-insensitive file systems), are detected by
the parallel checkout code and skipped, so that they can be safely
sequentially handled later. The collision detection works like the
following:
- If the collision was at basename (e.g. 'a/b' and 'a/B'), the framework
detects it by looking for EEXIST and EISDIR errors after an
open(O_CREAT | O_EXCL) failure.
- If the collision was at dirname (e.g. 'a/b' and 'A'), it is detected
at the has_dirs_only_path() check, which is done for the leading path
of each item in the parallel checkout queue.
Both verifications rely on the fact that, before enqueueing an entry for
parallel checkout, checkout_entry() makes sure that there is no file at
the entry's path and that its leading components are all real
directories. So, any later change in these conditions indicates that
there was a collision (either between two parallel-eligible entries or
between an eligible and an ineligible one).
After all parallel-eligible entries have been processed, the collided
(and thus, skipped) entries are sequentially fed to checkout_entry()
again. This is similar to the way the current code deals with
collisions, overwriting the previously checked out entries with the
subsequent ones. The only difference is that, since we no longer create
the files in the same order that they appear on index, we are not able
to determine which of the colliding entries will survive on disk (for
the classic code, it is always the last entry).
Co-authored-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document changes in -m and --diff-merges=m semantics, as well as new
--diff-merges=on option.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New log.diffMerges configuration variable sets the format that
--diff-merges=on will be using. The default is "separate".
t4013: add the following tests for log.diffMerges config:
* Test that wrong values are denied.
* Test that the value of log.diffMerges properly affects both
--diff-merges=on and -m.
t9902: fix completion tests for log.d* to match log.diffMerges.
Added documentation for log.diffMerges.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let -m option (and --diff-merges=m) enable the default format instead
of "separate", to be able to tune it with log.diffMerges option.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split set_diff_merges() into separate parsing and execution functions,
the former to be reused for parsing of configuration values later in
the patch series.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce the notion of default diff format for merges, and the option
"on" to select it. The default format is "separate" and can't yet
be changed, so effectively "on" is just a synonym for "separate"
for now. Add corresponding test to t4013.
This is in preparation for introducing log.diffMerges configuration
option that will let --diff-merges=on to be configured to any
supported format.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug the ort merge backend throughout the rest of the system, and
start testing it as a replacement for the recursive backend.
* en/ort-readiness:
Add testing with merge-ort merge strategy
t6423: mark remaining expected failure under merge-ort as such
Revert "merge-ort: ignore the directory rename split conflict for now"
merge-recursive: add a bunch of FIXME comments documenting known bugs
merge-ort: write $GIT_DIR/AUTO_MERGE whenever we hit a conflict
t: mark several submodule merging tests as fixed under merge-ort
merge-ort: implement CE_SKIP_WORKTREE handling with conflicted entries
t6428: new test for SKIP_WORKTREE handling and conflicts
merge-ort: support subtree shifting
merge-ort: let renormalization change modify/delete into clean delete
merge-ort: have ll_merge() use a special attr_index for renormalization
merge-ort: add a special minimal index just for renormalization
merge-ort: use STABLE_QSORT instead of QSORT where required
Various rename detection optimization to help "ort" merge strategy
backend.
* en/ort-perf-batch-10:
diffcore-rename: determine which relevant_sources are no longer relevant
merge-ort: record the reason that we want a rename for a file
diffcore-rename: add computation of number of unknown renames
diffcore-rename: check if we have enough renames for directories early on
diffcore-rename: only compute dir_rename_count for relevant directories
merge-ort: record the reason that we want a rename for a directory
merge-ort, diffcore-rename: tweak dirs_removed and relevant_source type
diffcore-rename: take advantage of "majority rules" to skip more renames
Aliased command lookup accesses the `list` variable before it has been
set, causing an error in "nounset" mode. Initialize to an empty string
to avoid that.
$ git nonexistent-command <Tab>bash: list: unbound variable
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a remote has the skipFetchAll setting enabled, then that remote is
not intended for frequent fetching. It makes sense to not fetch that
data during the 'prefetch' maintenance task. Skip that remote in the
iteration without error. The skip_default_update member is initialized
in remote.c:handle_config() as part of initializing the 'struct remote'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'prefetch' maintenance task previously forced the following refspec
for each remote:
+refs/heads/*:refs/prefetch/<remote>/*
If a user has specified a more strict refspec for the remote, then this
prefetch task downloads more objects than necessary.
The previous change introduced the '--prefetch' option to 'git fetch'
which manipulates the remote's refspec to place all resulting refs into
refs/prefetch/, with further partitioning based on the destinations of
those refspecs.
Update the documentation to be more generic about the destination refs.
Do not mention custom refspecs explicitly, as that does not need to be
highlighted in this documentation. The important part of placing refs in
refs/prefetch/ remains.
Reported-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --prefetch option will be used by the 'prefetch' maintenance task
instead of sending refspecs explicitly across the command-line. The
intention is to modify the refspec to place all results in
refs/prefetch/ instead of anywhere else.
Create helper method filter_prefetch_refspec() to modify a given refspec
to fit the rules expected of the prefetch task:
* Negative refspecs are preserved.
* Refspecs without a destination are removed.
* Refspecs whose source starts with "refs/tags/" are removed.
* Other refspecs are placed within "refs/prefetch/".
Finally, we add the 'force' option to ensure that prefetch refs are
replaced as necessary.
There are some interesting cases that are worth testing.
An earlier version of this change dropped the "i--" from the loop that
deletes a refspec item and shifts the remaining entries down. This
allowed some refspecs to not be modified. The subtle part about the
first --prefetch test is that the "refs/tags/*" refspec appears directly
before the "refs/heads/bogus/*" refspec. Without that "i--", this
ordering would remove the "refs/tags/*" refspec and leave the last one
unmodified, placing the result in "refs/heads/*".
It is possible to have an empty refspec. This is typically the case for
remotes other than the origin, where users want to fetch a specific tag
or branch. To correctly test this case, we need to further remove the
upstream remote for the local branch. Thus, we are testing a refspec
that will be deleted, leaving nothing to fetch.
Helped-by: Tom Saeger <tom.saeger@oracle.com>
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apparently this is not supported with Microsoft's Universal C Runtime.
So let's not actually do that.
Instead, just return success because we _know_ that we expect the `NUL`
device to be present.
Side note: it is possible to turn off the "Null device driver" and
thereby disable `NUL`. Too many things are broken if this driver is
disabled, therefore it is not worth bothering to try to detect its
presence when `access()` is called.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On write() errors, packet_write() dies with the same error message that
is already printed by its callee, packet_write_gently(). This produces
an unnecessarily verbose and repetitive output:
error: packet write failed
fatal: packet write failed: <strerror() message>
In addition to that, packet_write_gently() does not always fulfill its
caller expectation that errno will be properly set before a non-zero
return. In particular, that is not the case for a "data exceeds max
packet size" error. So, in this case, packet_write() will call
die_errno() and print an strerror(errno) message that might be totally
unrelated to the actual error.
Fix both those issues by turning packet_write() and
packet_write_gently() into wrappers to a common lower level function
that doesn't print the error message, but instead returns it on a buffer
for the caller to die() or error() as appropriate.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" now takes "--3way" and "--cached" at the same time, and
work and record results only in the index.
* jz/apply-3way-cached:
git-apply: allow simultaneous --cached and --3way options
The command line completion (in contrib/) has learned that
CHERRY_PICK_HEAD is a possible pseudo-ref.
* ab/complete-cherry-pick-head:
bash completion: complete CHERRY_PICK_HEAD
"git apply --3way" has always been "to fall back to 3-way merge
only when straight application fails". Swap the order of falling
back so that 3-way is always attempted first (only when the option
is given, of course) and then straight patch application is used as
a fallback when it fails.
* jz/apply-run-3way-first:
git-apply: try threeway first when "--3way" is used
A command such as `git push -qu origin feature` will print "Branch
'feature' set up to track remote branch 'feature' from 'origin'." even
when --quiet is passed. In this case it's because install_branch_config() is
always called with BRANCH_CONFIG_VERBOSE.
struct transport keeps track of the desired verbosity. Fix the above
issue by passing BRANCH_CONFIG_VERBOSE conditionally based on that.
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The same "do not capitalize the first word" rule is applied to both
our patch titles and error messages, but the existing description
was fuzzy in two aspects.
* For error messages, it was not said that this was only about the
first word that begins the sentence.
* For both, it was not clear when a capital letter there was not an
error. We avoid capitalizing the first word when the only reason
you would capitalize it is because it happens to be the first
word in the sentence. If a proper noun, which is usually spelled
in capital letters, happens to come at the beginning of the
sentence, it should be kept in capital letters.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A sparse-index loads the name-hash data for its entries, including the
sparse-directory entries. If a caller asks for a path that is contained
within a sparse-directory entry, we need to expand to a full index and
recalculate the name hash table before returning the result. Insert
calls to expand_to_path() to protect against this case.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users of the index API have a specific path they are looking for,
but choose to use index_file_exists() to rely on the name-hash hashtable
instead of doing binary search with index_name_pos(). These users only
need to know a yes/no answer, not a position within the cache array.
When the index is sparse, the name-hash hash table does not contain the
full list of paths within sparse directories. It _does_ contain the
directory names for the sparse-directory entries.
Create a helper function, expand_to_path(), for intended use with the
name-hash hashtable functions. The integration with name-hash.c will
follow in a later change.
The solution here is to use ensure_full_index() when we determine that
the requested path is within a sparse directory entry. This will
populate the name-hash hashtable as the index is recomputed from
scratch.
There may be cases where the caller is trying to find an untracked path
that is not in the index but also is not within a sparse directory
entry. We want to minimize the overhead for these requests. If we used
index_name_pos() to find the insertion order of the path, then we could
determine from that position if a sparse-directory exists. (In fact,
just calling index_name_pos() in that case would lead to expanding the
index to a full index.) However, this takes O(log N) time where N is the
number of cache entries.
To keep the performance of this call based mostly on the input string,
use index_file_exists() to look for the ancestors of the path. Using the
heuristic that a sparse directory is likely to have a small number of
parent directories, we start from the bottom and build up. Use a string
buffer to allow mutating the path name to terminate after each slash for
each hashset test.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sparse directory entries represent a directory that is outside the
sparse-checkout definition. These are not paths to blobs, so should not
be added to the name_hash table. Instead, they should be added to the
directory hashtable when 'ignore_case' is true.
Add a condition to avoid placing sparse directories into the name_hash
hashtable. This avoids filling the table with extra entries that will
never be queried.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all index entries, ensure that a sparse index is
expanded to a full index to avoid unexpected behavior. This case could
be integrated later by ensuring that we walk the tree in the
sparse-directory entry, but the current behavior is only expecting
blobs. Save this integration for later when it can be properly tested.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full index to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full index to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full index to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full index to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full index to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full index to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full index to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full index to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full index to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full one to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full one to avoid missing files.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full one so we do not miss blobs to scan. Later, this can
integrate more carefully with sparse indexes with proper testing.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When verifying all blobs reachable from the index, ensure that a sparse
index has been expanded to a full one to avoid missing some blobs.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index has
been expanded to a full one to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two loops iterate over all cache entries, so ensure that a sparse
index is expanded to a full index before we do so.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries in the checkout builtin, ensure
that we have a full index to avoid any unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before we iterate over all cache entries, ensure that the index is not
sparse. This loop in checkout_all() might be safe to iterate over a
sparse index, but let's put this protection here until it can be
carefully tested.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full index to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Soon we will insert ensure_full_index() calls across the codebase.
Instead of also adding include statements for sparse-index.h, let's just
use the fact that anything that cares about the index already has
cache.h in its includes.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers to index_name_pos() or index_name_stage_pos() have a specific
path in mind. If that happens to be a path with an ancestor being a
sparse-directory entry, it can lead to unexpected results.
In the case that we did not find the requested path, check to see if the
position _before_ the inserted position is a sparse directory entry that
matches the initial segment of the input path (including the directory
separator at the end of the directory name). If so, then expand the
index to be a full index and search again. This expansion will only
happen once per index read.
Future enhancements could be more careful to expand only the necessary
sparse directory entry, but then we would have a special "not fully
sparse, but also not fully expanded" mode that could affect writing the
index to file. Since this only occurs if a specific file is requested
outside of the sparse checkout definition, this is unlikely to be a
common situation.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several methods specify that they take a 'struct index_state' pointer
with the 'const' qualifier because they intend to only query the data,
not change it. However, we will be introducing a step very low in the
method stack that might modify a sparse-index to become a full index in
the case that our queries venture inside a sparse-directory entry.
This change only removes the 'const' qualifiers that are necessary for
the following change which will actually modify the implementation of
index_name_stage_pos().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Edit and expand the sparse-index design document with the plan for
guarding index operations with ensure_full_index().
Notably, the plan has changed to not have an expand_to_path() method in
favor of checking for a sparse-directory hit inside of the
index_path_pos() API.
The changes that follow this one will incrementally add
ensure_full_index() guards to iterations over all cache entries. Some
iterations over the cache entries are not protected due to a few
categories listed in the document. Since these are not being modified,
here is a short list of the files and methods that will not receive
these guards:
Looking for non-zero stage:
* builtin/add.c:chmod_pathspec()
* builtin/merge.c:count_unmerged_entries()
* merge-ort.c:record_conflicted_index_entries()
* read-cache.c:unmerged_index()
* rerere.c:check_one_conflict(), find_conflict(), rerere_remaining()
* revision.c:prepare_show_merge()
* sequencer.c:append_conflicts_hint()
* wt-status.c:wt_status_collect_changes_initial()
Looking for submodules:
* builtin/submodule--helper.c:module_list_compute()
* submodule.c: several methods
* worktree.c:validate_no_submodules()
Part of the index API:
* name-hash.c: lazy init methods
* preload-index.c:preload_thread(), preload_index()
* read-cache.c: file format methods
Checking for correct order of cache entries:
* read-cache.c:check_ce_order()
Ignores SKIP_WORKTREE entries or already aware:
* unpack-trees.c:mark_new_skip_worktree()
* wt-status.c:wt_status_check_sparse_checkout()
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command-line completion script (in contrib/) had a couple of
references that would have given a warning under the "-u" (nounset)
option.
* vs/completion-with-set-u:
completion: audit and guard $GIT_* against unset use
"gitweb" learned "e-mail privacy" feature to redact strings that
look like e-mail addresses on various pages.
* gk/gitweb-redacted-email:
gitweb: add "e-mail privacy" feature to redact e-mail addresses
Clean-up codepaths that implements "git send-email --validate"
option and improves the message from it.
* ab/send-email-validate-errors:
git-send-email: improve --validate error output
git-send-email: refactor duplicate $? checks into a function
git-send-email: test full --validate output
Streamline the codepath to fix the UTF-8 encoding issues in the
argv[] and the prefix on macOS.
* tb/precompose-prefix-simplify:
macOS: precompose startup_info->prefix
precompose_utf8: make precompose_string_if_needed() public
A configuration variable has been added to force tips of certain
refs to be given a reachability bitmap.
* tb/pack-preferred-tips-to-give-bitmap:
builtin/pack-objects.c: respect 'pack.preferBitmapTips'
t/helper/test-bitmap.c: initial commit
pack-bitmap: add 'test_bitmap_commits()' helper
A NULL-dereference bug has been corrected in an error codepath in
"git for-each-ref", "git branch --list" etc.
* jk/ref-filter-segfault-fix:
ref-filter: fix NULL check for parse object failure
Correct documentation added in e544221d97 (trace2:
Documentation/technical/api-trace2.txt, 2019-02-22) to state that
calling BUG() also emits an "error" event. See ee4512ed48 (trace2:
create new combined trace facility, 2019-02-22) for the initial
implementation.
The BUG() function did not emit an event then however, that was only
changed later in 0a9dde4a04 (usage: trace2 BUG() invocations,
2021-02-05), that commit changed the code, but didn't update any of
the docs.
Let's also add a cross-reference from api-error-handling.txt.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the BUG() function was added in d8193743e0 (usage.c: add BUG()
function, 2017-05-12) these docs added in 1f23cfe0ef (doc: document
error handling functions and conventions, 2014-12-03) were not
updated. Let's do that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In ee4512ed48 (trace2: create new combined trace facility,
2019-02-22) we started with two copies of this comment,
0ee10fd129 (usage: add trace2 entry upon warning(), 2020-11-23) added
a third. Let's instead add an earlier comment that applies to all
these mostly-the-same functions.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finish the removal I started in 1108cea7f8 (tests: remove most uses
of test_i18ncmp, 2021-02-11). At that time the function wasn't removed
due to disruption with in-flight changes, remove the occurrences that
have landed since then.
As of writing this there are no test_i18ncmp uses between "master" and
"seen", so let's also remove the function to finally put it to rest.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --exclude-promisor-objects is given, before traversing any objects
we iterate over all of the objects in any promisor packs, marking them
as UNINTERESTING and SEEN. We turn the oid we get from iterating the
pack into an object with parse_object(), but this has two problems:
- it's slow; we are zlib inflating (and reconstructing from deltas)
every byte of every object in the packfile
- it leaves the tree buffers attached to their structs, which means
our heap usage will grow to store every uncompressed tree
simultaneously. This can be gigabytes.
We can obviously fix the second by freeing the tree buffers after we've
parsed them. But we can observe that the function doesn't look at the
object contents at all! The only reason we call parse_object() is that
we need a "struct object" on which to set the flags. There are two
options here:
- we can look up just the object type via oid_object_info(), and then
call the appropriate lookup_foo() function
- we can call lookup_unknown_object(), which gives us an OBJ_NONE
struct (which will get auto-converted later by object_as_type() via
calls to lookup_commit(), etc).
The first one is closer to the current code, but we do pay the price to
look up the type for each object. The latter should be more efficient in
CPU, though it wastes a little bit of memory (the "unknown" object
structs are a union of all object types, so some of the structs are
bigger than they need to be). It also runs the risk of triggering a
latent bug in code that calls lookup_object() directly but isn't ready
to handle OBJ_NONE (such code would already be buggy, but we use
lookup_unknown_object() infrequently enough that it might be hiding).
I went with the second option here. I don't think the risk is high (and
we'd want to find and fix any such bugs anyway), and it should be more
efficient overall.
The new tests in p5600 show off the improvement (this is on git.git):
Test HEAD^ HEAD
-------------------------------------------------------------------------------
5600.5: count commits 0.37(0.37+0.00) 0.38(0.38+0.00) +2.7%
5600.6: count non-promisor commits 11.74(11.37+0.37) 0.04(0.03+0.00) -99.7%
The improvement is particularly big in this script because _every_
object in the newly-cloned partial repo is a promisor object. So after
marking them all, there's nothing left to traverse.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the other lookup_foo() functions take a repository argument, but
lookup_unknown_object() was never converted, and it uses the_repository
internally. Let's fix that.
We could leave a wrapper that uses the_repository, but there aren't that
many calls, so we'll just convert them all. I looked briefly at each
site to see if we had a repository struct (besides the_repository) we
could pass, but none of them do (so this conversion to pass
the_repository is a pure noop in each case, though it does take us one
step closer to eventually getting rid of the_repository).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To get the list of all promisor objects, we not only include all objects
in promisor packs, but also parse each of those objects to see which
objects they reference. After parsing a tree object, the tree->buffer
field will remain populated until we explicitly free it. So in a partial
clone of blob:none, for example, we are essentially reading every tree
in the repository (since they're all in the initial promisor pack), and
keeping all of their uncompressed contents in memory at once.
This patch frees the tree buffers after we've finished marking all of
their reachable objects. We shouldn't need to do this for any other
object type. While we are using some extra memory to store the structs,
no other object type stores the whole contents in its parsed form (we do
sometimes hold on to commit buffers, but less so these days due to
commit graphs, plus most commands which care about promisor objects turn
off the save_commit_buffer global).
Even for a moderate-sized repository like git.git, this patch drops the
peak heap (as measured by massif) for git-fsck from ~1.7GB to ~138MB.
Fsck is a good candidate for measuring here because it doesn't interact
with the promisor code except to call is_promisor_object(), so we can
isolate just this problem.
The added perf test shows only a tiny improvement on my machine for
git.git, since 1.7GB isn't enough to cause any real memory pressure:
Test HEAD^ HEAD
--------------------------------------------------------------------------------
5600.4: fsck 21.26(20.90+0.35) 20.84(20.79+0.04) -2.0%
With linux.git the absolute change is a bit bigger, though still a small
percentage:
Test HEAD^ HEAD
-----------------------------------------------------------------------------
5600.4: fsck 262.26(259.13+3.12) 254.92(254.62+0.29) -2.8%
I didn't have the patience to run it under massif with linux.git, but
it's probably on the order of about 14GB improvement, since that's the
sum of the sizes of all of the uncompressed trees (but still isn't
enough to create memory pressure on this particular machine, which has
64GB of RAM). Smaller machines would probably see a bigger effect on
runtime (and sadly our perf suite does not measure peak heap).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref backend API uses errno as a sideband error channel.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new method uses the update_index counter, which isn't susceptible to clock
inaccuracies.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor a test added in 83c9433e67 (git-svn: support for git-svn
propset, 2014-12-07) to avoid using "set -e" in the test body. Let's
move this into a setup test using "test_expect_success" instead.
While I'm at it refactor:
* Repeated "mkdir" to "mkdir -p"
* Uses of "touch" to creating the files with ">" instead
* The "rm -rf" at the end to happen in a "test_when_finished"
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the immediate "rm -rf .git" from the start of this test. This
was added back in 41337e22f0 (git-svn: add tests for command-line
usage of init and clone commands, 2007-11-17) when there was a "trash"
directory shared by all the tests, but ever since abc5d372ec (Enable
parallel tests, 2008-08-08) we've had per-test trash directories.
So this setup can simply be removed. We could use
TEST_NO_CREATE_REPO=true, but I don't think it's worth the effort to
go out of our way to be different. It doesn't matter that we now have
a redundant .git at the top-level.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When serving a clone or fetch with bitmaps, after deciding which objects
need to be sent our "pack reuse" mechanism kicks in: we try to send
more-or-less verbatim a bunch of objects from the beginning of the
bitmapped packfile without even adding them to the to_pack.objects
array.
After deciding which objects will be in the "reused" portion, we update
nr_result to account for those, and then trigger display_progress() to
show the user (who is undoubtedly dazzled that we managed to enumerate
so many objects so quickly).
But then something confusing happens: the "Enumerating objects" progress
meter jumps _backwards_, counting up from zero the number of objects we
actually add into to_pack.objects.
This worked correctly once upon a time, but was broken in 5af050437a
(pack-objects: show some progress when counting kept objects,
2018-04-15), when the latter half of that progress meter switched to
using a separate nr_seen counter, rather than nr_result. Nobody noticed
for two reasons:
- prior to the pack-reuse fixes from a14aebeac3 (Merge branch
'jk/packfile-reuse-cleanup', 2020-02-14), the reuse code almost
never kicked in anyway
- the output looks _kind of_ correct. The "backwards" moment is hard
to catch, because we overwrite the old progress number with the new
one, and the larger number is displayed only for a second. So unless
you look at that exact second, you just see the much smaller value,
counting up to the number of non-reused objects (though of course if
you catch it in stderr, or look at GIT_TRACE_PACKET from a server
with bitmaps, you can see both values).
This smaller output isn't wrong per se, but isn't counting what we ever
intended to. We should give the user the whole number of objects we
considered (which, as per 5af050437a's original purpose, is already
_not_ a count of what goes into to_pack.objects). The follow-on
"Counting objects" meter shows the actual number of objects we feed into
that array.
We can easily fix this by bumping (and showing) nr_seen for the
pack-reused objects. When the included test is run without this patch,
the second pack-objects invocation produces "Enumerating objects: 1" to
show the one loose object, even though the resulting pack has hundreds
of objects in it. With it, we jump to "Enumerating objects: 674" after
deciding on reuse, and then "675" when we add in the loose object.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
versions could be an empty string_list. In that case, versions->items is
NULL, and we shouldn't be trying to perform pointer arithmetic with it (as
that results in undefined behaviour).
Moreover we only use the results of this calculation once when calling
QSORT. Therefore we choose to skip creating relevant_entries and call
QSORT directly with our manipulated pointers (but only if there's data
requiring sorting). This lets us avoid abusing the string_list API,
and saves us from having to explain why this abuse is OK.
Finally, an assertion is added to make sure that write_tree() is called
with a valid offset.
This issue has probably existed since:
ee4012dcf9 (merge-ort: step 2 of tree writing -- function to create tree object, 2020-12-13)
But it only started occurring during tests since tests started using
merge-ort:
f3b964a07e (Add testing with merge-ort merge strategy, 2021-03-20)
For reference - here's the original UBSAN commit that implemented this
check, it sounds like this behaviour isn't actually likely to cause any
issues (but we might as well fix it regardless):
https://reviews.llvm.org/D67122
UBSAN output from t3404 or t5601:
merge-ort.c:2669:43: runtime error: applying zero offset to null pointer
#0 0x78bb53 in write_tree merge-ort.c:2669:43
#1 0x7856c9 in process_entries merge-ort.c:3303:2
#2 0x782317 in merge_ort_nonrecursive_internal merge-ort.c:3744:2
#3 0x77feef in merge_incore_nonrecursive merge-ort.c:3853:2
#4 0x6f6a5c in do_recursive_merge sequencer.c:640:3
#5 0x6f6a5c in do_pick_commit sequencer.c:2221:9
#6 0x6ef055 in single_pick sequencer.c:4814:9
#7 0x6ef055 in sequencer_pick_revisions sequencer.c:4867:10
#8 0x4fb392 in run_sequencer revert.c:225:9
#9 0x4fa5b0 in cmd_revert revert.c:235:8
#10 0x42abd7 in run_builtin git.c:453:11
#11 0x429531 in handle_builtin git.c:704:3
#12 0x4282fb in run_argv git.c:771:4
#13 0x4282fb in cmd_main git.c:902:19
#14 0x524b63 in main common-main.c:52:11
#15 0x7fc2ca340349 in __libc_start_main (/lib64/libc.so.6+0x24349)
#16 0x4072b9 in _start start.S:120
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior merge-ort.c:2669:43 in
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Object filters currently only support filtering blobs or trees based on
some criteria. This commit lays the foundation to also allow filtering
of tags and commits.
No change in behaviour is expected from this commit given that there are
no filters yet for those object types.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Re-order the sections of a few manual pages to be consistent with the
entirety of the rest of our documentation. This allows us to remove
the just-added whitelist of "bad" order from
lint-man-section-order.perl.
I'm doing that this way around so that code will be easy to dig up if
we'll need it in the future. I've intentionally not added some other
sections such as EXAMPLES to the list of known sections.
If we were to add that we'd find some out of order. Perhaps we'll want
to order those consistently as well in the future, at which point
whitelisting some of them might become handy again.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a linting script to check the relative order of the sections in
the documentation. We should have NAME, then SYNOPSIS, DESCRIPTION,
OPTIONS etc. in that order.
That holds true throughout our documentation, except for a few
exceptions which are hardcoded in the linting script.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lint for and fix the three manual pages that were missing the standard
"Part of the linkgit:git[1] suite" end section.
We only do this for the man[157] section documents (we don't have
anything outside those sections), not files to be included,
howto *.txt files etc.
We could also add this to the existing (and then renamed)
lint-gitlink.perl, but I'm not doing that here.
Obviously all of that fits in one script, but I think for something
like this that's a one-off script with global variables it's much
harder to follow when a large part of your script is some if/else or
keeping/resetting of state simply to work around the script doing two
things instead of one.
Especially because in this case this script wants to process the file
as one big string, but lint-gitlink.perl wants to look at it one line
at a time. We could also consolidate this whole thing and
t/check-non-portable-shell.pl, but that one likes to join lines as
part of its shell parsing.
So let's just add another script, whole scaffolding is basically:
use strict;
use warnings;
sub report { ... }
my $code = 0;
while (<>) { ... }
exit $code;
We'd spend more lines effort trying to consolidate them than just
copying that around.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The lint-gitlink.perl script added in ab81411ced (ci: validate
"linkgit:" in documentation, 2016-05-04) was more complex than it
needed to be. It:
- Was using File::Find to recursively find *.txt files in
Documentation/, let's instead use the Makefile as a source of truth
for *.txt files, and pass it down to the script.
- We now don't lint linkgit:* in RelNotes/* or technical/*, which we
shouldn't have been doing in the first place anyway.
- When the doc-diff script was added in beb188e22a (add a script to
diff rendered documentation, 2018-08-06) we started sometimes having
a "git worktree" under Documentation/.
This tree contains a full checkout of git.git, as a result the
"lint" script would recurse into that, and lint any *.txt file
found in that entire repository.
In practice the only in-tree "linkgit" outside of the
Documentation/ tree is contrib/contacts/git-contacts.txt and
contrib/subtree/git-subtree.txt, so this wouldn't emit any errors
Now we instead simply trust the Makefile to give us *.txt files.
Since the Makefile also knows what sections each page should be in we
don't have to open the files ourselves and try to parse that out. As a
bonus this will also catch bugs with the section line in the files
themselves being incorrect.
The structure of the new script is mostly based on
t/check-non-portable-shell.pl. As an added bonus it will also use
pos() to print where the problems it finds are, e.g. given an issue
like:
diff --git a/Documentation/git-cherry.txt b/Documentation/git-cherry.txt
[...]
and line numbers. git-cherry therefore detects when commits have been
-"copied" by means of linkgit:git-cherry-pick[1], linkgit:git-am[1] or
-linkgit:git-rebase[1].
+"copied" by means of linkgit:git-cherry-pick[2], linkgit:git-am[3] or
+linkgit:git-rebase[4].
We'll now emit:
git-cherry.txt:20: error: git-cherry-pick[2]: wrong section (should be 1), shown with 'HERE' below:
git-cherry.txt:20: '"copied" by means of linkgit:git-cherry-pick[2]' <-- HERE
git-cherry.txt:20: error: git-am[3]: wrong section (should be 1), shown with 'HERE' below:
git-cherry.txt:20: '"copied" by means of linkgit:git-cherry-pick[2], linkgit:git-am[3]' <-- HERE
git-cherry.txt:21: error: git-rebase[4]: wrong section (should be 1), shown with 'HERE' below:
git-cherry.txt:21: 'linkgit:git-rebase[4]' <-- HERE
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend this script added in ab81411ced (ci: validate "linkgit:" in
documentation, 2016-05-04) to pass under "use strict", and add a "use
warnings" for good measure.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Re-introduce a variable to declare what *.txt files need to be
considered for the purposes of scouring files to generate a dependency
graph of includes.
When doc.dep was introduced in a5ae8e64cf (Fix documentation
dependency generation., 2005-11-07) we had such a variable called
TEXTFILES, but it was refactored away just a few commits after that in
fb612d54c1 (Documentation: fix dependency generation.,
2005-11-07). I'm planning to add more wildcards here, so let's bring
it back.
I'm not calling it TEXTFILES because we e.g. don't consider
Documentation/technical/*.txt when generating the graph (they don't
use includes). Let's instead call it DOC_DEP_TXT.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor occurrences of $(wildcard howto/*.txt) into a single
HOWTO_TXT variable for readability and consistency.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug in how --no-reschedule-failed-exec interacts with
rebase.rescheduleFailedExec=true being set in the config. Before this
change the --no-reschedule-failed-exec config option would be
overridden by the config.
This bug happened because of the particulars of how "rebase" works
v.s. most other git commands when it comes to parsing options and
config:
When we read the config and parse the CLI options we correctly prefer
the --no-reschedule-failed-exec option over
rebase.rescheduleFailedExec=true in the config. So far so good.
However the --reschedule-failed-exec option doesn't take effect when
the rebase starts (we'd just create a
".git/rebase-merge/reschedule-failed-exec" file if it was true). It
only takes effect when the exec command fails, at which point we'll
reschedule the failed "exec" command.
Since we only wrote out the positive
".git/rebase-merge/reschedule-failed-exec" under
--reschedule-failed-exec, but nothing with --no-reschedule-failed-exec
we'll forget that we asked not to reschedule failed "exec", and would
happily re-read the config and see that
rebase.rescheduleFailedExec=true is set.
So the config will effectively override the user having explicitly
disabled the option on the command-line.
Even more confusingly: Since rebase accepts different options based on
its state there wasn't even a way to get around this with "rebase
--continue --no-reschedule-failed-exec" (but you could of course set
the config with "rebase -c ...").
I think the least bad way out of this is to declare that for such
options and config whatever we decide at the beginning of the rebase
goes. So we'll now always create either a "reschedule-failed-exec" or
a "no-reschedule-failed-exec file at the start, not just the former if
we decided we wanted the feature.
With this new worldview you can no longer change the setting once a
rebase has started except by manually removing the state files
discussed above. I think making it work like that is the the least
confusing thing we can do.
In the future we might want to learn to change the setting in the
middle by combining "--edit-todo" with
"--[no-]reschedule-failed-exec", we currently don't support combining
those options, or any other way to change the state in the middle of
the rebase short of manually editing the files in
".git/rebase-merge/*".
The bug being fixed here originally came about because of a
combination of the behavior of the code added in d421afa0c6 (rebase:
introduce --reschedule-failed-exec, 2018-12-10) and the addition of
the config variable in 969de3ff0e (rebase: add a config option to
default to --reschedule-failed-exec, 2018-12-10).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a test added in 906b63942a (rebase --am: ignore
rebase.rescheduleFailedExec, 2019-07-01) to camel-case the
configuration variable. This doesn't change the behavior of the test,
it's merely to help its human readers.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move processing of tags into its own function to make the logic easier
to extend when we're going to implement filtering for tags. No change in
behaviour is expected from this commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The NOT_USER_GIVEN flag of an object marks whether a flag was explicitly
provided by the user or not. The most important use case for this is
when filtering objects: only objects that were not explicitly requested
will get filtered.
The flag is currently only set for blobs and trees, which has been fine
given that there are no filters for tags or commits currently. We're
about to extend filtering capabilities to add object type filter though,
which requires us to set up the NOT_USER_GIVEN flag correctly -- if it's
not set, the object wouldn't get filtered at all.
Mark unseen commit parents as NOT_USER_GIVEN when processing parents.
Like this, explicitly provided parents stay user-given and thus
unfiltered, while parents which get loaded as part of the graph walk
can be filtered.
This commit shouldn't have any user-visible impact yet as there is no
logic to filter commits yet.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `uploadpackfilter.allow` is set to `true`, it means that filters
are enabled by default except in the case where a filter is explicitly
disabled via `uploadpackilter.<filter>.allow`. This option will not only
enable the currently supported set of filters, but also any filters
which get added in the future. As such, an admin which wants to have
tight control over which filters are allowed and which aren't probably
shouldn't ever set `uploadpackfilter.allow=true`.
Amend the documentation to make the ramifications more explicit so that
admins are aware of this.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent commit will need this functionality independent of the rest
of send_fetch_request(), so put this into its own function.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent commit will need part, but not all, of the functionality in
add_haves(), so move some of its functionality to its sole caller
send_fetch_request().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent commit will need part, but not all, of the functionality in
process_acks(), so move some of its functionality to its sole caller
do_fetch_pack_v2(). As a side effect, the resulting code is also
shorter.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In send_fetch_request(), "object-format" is written directly to the file
descriptor, as opposed to the other arguments, which are buffered.
Buffer "object-format" as well. "object-format" must be buffered; in
particular, it must appear after "command=fetch" in the request.
This divergence was introduced in 4b831208bb ("fetch-pack: parse and
advertise the object-format capability", 2020-05-27), perhaps as an
oversight (the surrounding code at the point of this commit has already
been using a request buffer.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gitweb extracts content from the Git log and makes it accessible
over HTTP. As a result, e-mail addresses found in commits are
exposed to web crawlers and they may not respect robots.txt.
This can result in unsolicited messages.
Introduce an 'email-privacy' feature which redacts e-mail addresses
from the generated HTML content. Specifically, obscure addresses
retrieved from the the author/committer and comment sections of the
Git log. The feature is off by default.
This feature does not prevent someone from downloading the
unredacted commit log, e.g., by cloning the repository, and
extracting information from it. It aims to hinder the low-
effort, bulk collection of e-mail addresses by web crawlers.
Signed-off-by: Georgios Kontaxis <geko1702+commits@99rst.org>
Acked-by: Eric Wong <e@80x24.org>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We auto-generate the list of supported configuration variables from
'Documentation/config/*.txt', and that list used to be created by the
'generate-cmdlist.sh' helper script and stored in the 'command-list.h'
header. Commit 709df95b78 (help: move list_config_help to
builtin/help, 2020-04-16) extracted this into a dedicated
'generate-configlist.sh' script and 'config-list.h' header, and added
a new target in the 'Makefile' as well, but while doing so it forgot
to extract the dependencies of the latter. Consequently, since then
'config-list.h' is not re-generated when 'Documentation/config/*.txt'
is updated, while 'command-list.h' is re-generated unnecessarily:
$ touch Documentation/config/log.txt
$ make -j4
GEN command-list.h
CC help.o
AR libgit.a
Fix this and list all config-related documentation files as
dependencies of 'config-list.h' and remove them from the dependencies
of 'command-list.h'.
$ touch Documentation/config/log.txt
$ make
GEN config-list.h
CC builtin/help.o
LINK git
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git add` refrains from adding or updating index entries that are
outside the current sparse checkout, but `git rm` doesn't follow the
same restriction. This is somewhat counter-intuitive and inconsistent.
So make `rm` honor the sparsity rules and advise on how to remove
SKIP_WORKTREE entries just like `add` does. Also add some tests for the
new behavior.
Suggested-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git add` already refrains from updating SKIP_WORKTREE entries, but it
silently exits with zero code when it is asked to do so. Instead, let's
warn the user and display a hint on how to update these entries.
Note that we only warn the user whey they give a pathspec item that
matches no eligible path for updating, but it does match one or more
SKIP_WORKTREE entries. A warning was chosen over erroring out right away
to reproduce the same behavior `add` already exhibits with ignored
files. This also allow users to continue their workflow without having
to invoke `add` again with only the eligible paths (as those will have
already been added).
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
refresh_index() doesn't update SKIP_WORKTREE entries, but it still
matches them against the given pathspecs, marks the matches on the
seen[] array, check if unmerged, etc. In the following patch, one caller
will need refresh_index() to ignore SKIP_WORKTREE entries entirely, so
add a flag that implements this behavior.
While we are here, also realign the REFRESH_* flags and convert the hex
values to the more natural bit shift format, which makes it easier to
spot holes.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new enum parameter to `add_pathspec_matches_against_index()` and
`find_pathspecs_matching_against_index()`, allowing callers to specify
whether these function should attempt to match SKIP_WORKTREE entries or
not. This will be used in a future patch to make `git add` display a
warning when it is asked to update SKIP_WORKTREE entries.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have a couple tests for `add` with SKIP_WORKTREE entries in
t7012, but these only cover the most basic scenarios. As we will be
changing how `add` deals with sparse paths in the subsequent commits,
let's move these two tests to their own file and add more test cases
for different `add` options and situations. This also demonstrates two
options that don't currently respect SKIP_WORKTREE entries: `--chmod`
and `--renormalize`.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git add --refresh <pathspec>` doesn't find any matches for the
given pathspec, it prints an error message using the `match` field of
the `struct pathspec_item`. However, this field doesn't contain the
magic part of the pathspec. Instead, let's use the `original` field.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a diff driver for Scheme-like languages which recognizes top level
and local `define` forms, whether it is a function definition, binding,
syntax definition or a user-defined `define-xyzzy` form.
Also supports R6RS `library` forms, `module` forms along with class and
struct declarations used in Racket (PLT Scheme).
Alternate "def" syntax such as those in Gerbil Scheme are also
supported, like defstruct, defsyntax and so on.
The rationale for picking `define` forms for the hunk headers is because
it is usually the only significant form for defining the structure of
the program, and it is a common pattern for schemers to have local
function definitions to hide their visibility, so it is not only the top
level `define`'s that are of interest. Schemers also extend the language
with macros to provide their own define forms (for example, something
like a `define-test-suite`) which is also captured in the hunk header.
Since it is common practice to extend syntax with variants of a form
like `module+`, `class*` etc, those have been supported as well.
The word regex is a best-effort attempt to conform to R7RS[1] valid
identifiers, symbols and numbers.
[1] https://small.r7rs.org/attachment/r7rs.pdf (section 2.1)
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git daemon" has been tightened against systems that take backslash
as directory separator.
* rs/daemon-sanitize-dir-sep:
daemon: sanitize all directory separators
The ort merge backend has been optimized by skipping irrelevant
renames.
* en/ort-perf-batch-9:
diffcore-rename: avoid doing basename comparisons for irrelevant sources
merge-ort: skip rename detection entirely if possible
merge-ort: use relevant_sources to filter possible rename sources
merge-ort: precompute whether directory rename detection is needed
merge-ort: introduce wrappers for alternate tree traversal
merge-ort: add data structures for an alternate tree traversal
merge-ort: precompute subset of sources for which we need rename detection
diffcore-rename: enable filtering possible rename sources
"git cherry-pick/revert" with or without "--[no-]edit" did not spawn
the editor as expected (e.g. "revert --no-edit" after a conflict
still asked to edit the message), which has been corrected.
* en/sequencer-edit-upon-conflict-fix:
sequencer: fix edit handling for cherry-pick and revert messages
"git clone --reject-shallow" option fails the clone as soon as we
notice that we are cloning from a shallow repository.
* ll/clone-reject-shallow:
builtin/clone.c: add --reject-shallow option
An on-disk reverse-index to map the in-pack location of an object
back to its object name across multiple packfiles is introduced.
* tb/reverse-midx:
midx.c: improve cache locality in midx_pack_order_cmp()
pack-revindex: write multi-pack reverse indexes
pack-write.c: extract 'write_rev_file_order'
pack-revindex: read multi-pack reverse indexes
Documentation/technical: describe multi-pack reverse indexes
midx: make some functions non-static
midx: keep track of the checksum
midx: don't free midx_name early
midx: allow marking a pack as preferred
t/helper/test-read-midx.c: add '--show-objects'
builtin/multi-pack-index.c: display usage on unrecognized command
builtin/multi-pack-index.c: don't enter bogus cmd_mode
builtin/multi-pack-index.c: split sub-commands
builtin/multi-pack-index.c: define common usage with a macro
builtin/multi-pack-index.c: don't handle 'progress' separately
builtin/multi-pack-index.c: inline 'flags' with options
Simplify the test added in 9466e3809d (blame: enable funcname blaming
with userdiff driver, 2020-11-01) to use the --author support recently
added in 999cfc4f45 (test-lib functions: add --author support to
test_commit, 2021-01-12).
We also did not need the full fortran-external-function content. Let's
cut it down to just the important parts.
I'm modifying it to demonstrate that the fortran-specific userdiff
function is in effect by adding "DO NOT MATCH ..." and "AS THE ..."
lines surrounding the "RIGHT" one.
This is to check that we're using the userdiff "fortran" driver, as
opposed to the default driver which would match on those lines as part
of the general heuristic of matching a line that doesn't begin with
whitespace.
The test had also been leaving behind a .gitattributes file for later
tests to possibly trip over, let's clean it up with
"test_when_finished".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor a test added in 9466e3809d (blame: enable funcname blaming
with userdiff driver, 2020-11-01) so that the blame tests don't rely
on stealing the contents of "t/t4018/fortran-external-function".
I have another patch series that'll possibly (or not) refactor that
file, but having this test inter-dependency makes things simple in any
case by making this test more readable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There have been no "broken" tests since 75c3b6b2e8 (userdiff: improve
Fortran xfuncname regex, 2020-08-12). Let's remove the test support
for them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the userdiff test to list the builtin drivers via the
test-tool, using the new for_each_userdiff_driver() API function.
This gets rid of the need to modify this part of the test every time a
new pattern is added, see 2ff6c34612 (userdiff: support Bash,
2020-10-22) and 09dad9256a (userdiff: support Markdown, 2020-05-02)
for two recent examples.
I only need the "list-builtin-drivers "argument here, but let's add
"list-custom-drivers" and "list-drivers" too, just because it's easy.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 122aa6f9c0 (diff: introduce diff.<driver>.binary, 2008-10-05)
the internals of the userdiff.c code have understood a "default" name,
which is invoked as userdiff_find_by_name("default") and present in
the "builtin_drivers" struct. Let's test for this special case.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the userdiff_find_by_namelen() function so that a new
for_each_userdiff_driver() API function does most of the work.
This will be useful for the same reason we've got other for_each_*()
API functions as part of various APIs, and will be used in a follow-up
commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Declare the pascal pattern consistently with how we declare the
others, not having "\n" on one line by itself, but as part of the
pattern, and when there are alterations have the "|" at the start, not
end of the line.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change those patterns which were declared with a regex on the same
line as the "PATTERNS()" line to put that regex on the next line, and
add missing "/* -- */" separator comments between the pattern and
word_regex.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Address some old code smell and move around the built-in userdiff
drivers so they're both in alphabetical order, and now in the same
order they appear in the gitattributes(5) documentation.
The two started drifting in be58e70dba (diff: unify external diff and
funcname parsing code, 2008-10-05), and then even further in
80c49c3de2 (color-words: make regex configurable via attributes,
2009-01-17) when the "cpp" pattern was added.
There are no functional changes here, and as --color-moved will show
only moved existing lines.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a use of GIT_TEST_GETTEXT_POISON added in f276e2a469 (config:
improve error message for boolean config, 2021-02-11).
This was simultaneously in-flight with my d162b25f95 (tests: remove
support for GIT_TEST_GETTEXT_POISON, 2021-01-20) which removed the
rest of the GIT_TEST_GETTEXT_POISON code.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$GIT_COMPLETION_SHOW_ALL and $GIT_TESTING_ALL_COMMAND_LIST were used
without guarding against them being unset, causing errors in nounset
(set -u) mode.
No other nounset-unsafe $GIT_* usages were found.
While at it, remove a superfluous (duplicate) unset guard from $GIT_DIR
in __git_find_repo_path.
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" does not allow "--cached" and "--3way" to be used
together, since "--3way" writes conflict markers into the working
tree.
Allow "git apply" to accept "--cached" and "--3way" at the same
time. When a single file auto-resolves cleanly, the result is
placed in the index at stage #0 and the command exits with 0 status.
For a file that has a conflict which cannot be cleanly
auto-resolved, the original contents from common ancestor (stage
conflict at the content level, and the command exists with non-zero
status, because there is no place (like the working tree) to leave a
half-resolved merge for the user to resolve.
The user can use `git diff` to view the contents of the conflict, or
`git checkout -m -- .` to regenerate the conflict markers in the
working directory.
Don't attempt rerere in this case since it depends on conflict
markers written to file for its database storage and lookup. There
would be two main changes required to get rerere working:
1. Allow the rerere api to accept in memory object rather than
files, which would allow us to pass in the conflict markers
contained in the result from ll_merge().
2. Rerere can't write to the working directory, so it would have to
apply the result to cache stage #0 directly. A flag would be
needed to control this.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fsck API clean-up.
* ab/fsck-api-cleanup:
fetch-pack: use new fsck API to printing dangling submodules
fetch-pack: use file-scope static struct for fsck_options
fetch-pack: don't needlessly copy fsck_options
fsck.c: move gitmodules_{found,done} into fsck_options
fsck.c: add an fsck_set_msg_type() API that takes enums
fsck.c: pass along the fsck_msg_id in the fsck_error callback
fsck.[ch]: move FOREACH_FSCK_MSG_ID & fsck_msg_id from *.c to *.h
fsck.c: give "FOREACH_MSG_ID" a more specific name
fsck.c: undefine temporary STR macro after use
fsck.c: call parse_msg_type() early in fsck_set_msg_type()
fsck.h: re-order and re-assign "enum fsck_msg_type"
fsck.h: move FSCK_{FATAL,INFO,ERROR,WARN,IGNORE} into an enum
fsck.c: refactor fsck_msg_type() to limit scope of "int msg_type"
fsck.c: rename remaining fsck_msg_id "id" to "msg_id"
fsck.c: remove (mostly) redundant append_msg_id() function
fsck.c: rename variables in fsck_set_msg_type() for less confusion
fsck.h: use "enum object_type" instead of "int"
fsck.h: use designed initializers for FSCK_OPTIONS_{DEFAULT,STRICT}
fsck.c: refactor and rename common config callback
A few option description strings started with capital letters,
which were corrected.
* cc/downcase-opt-help:
column, range-diff: downcase option description
SECURITY.md that is facing individual contributors and end users
has been introduced. Also a procedure to follow when preparing
embargoed releases has been spelled out.
* js/security-md:
Document how we do embargoed releases
SECURITY: describe how to report vulnerabilities
Optimize "rev-list --use-bitmap-index --objects" corner case that
uses negative tags as the stopping points.
* ps/pack-bitmap-optim:
pack-bitmap: avoid traversal of objects referenced by uninteresting tag
"git commit" learned "--trailer <key>[=<value>]" option; together
with the interpret-trailers command, this will make it easier to
support custom trailers.
* zh/commit-trailer:
commit: add --trailer option
The hashwrite() API uses a buffering mechanism to avoid calling
write(2) too frequently. This logic has been refactored to be
easier to understand.
* ds/clarify-hashwrite:
csum-file: make hashwrite() more readable
Plug or annotate remaining leaks that trigger while running the
very basic set of tests.
* ah/plugleaks:
transport: also free remote_refs in transport_disconnect()
parse-options: don't leak alias help messages
parse-options: convert bitfield values to use binary shift
init-db: silence template_dir leak when converting to absolute path
init: remove git_init_db_config() while fixing leaks
worktree: fix leak in dwim_branch()
clone: free or UNLEAK further pointers when finished
reset: free instead of leaking unneeded ref
symbolic-ref: don't leak shortened refname in check_symref()
When e.g. in a failed cherry pick we did not recognize
CHERRY_PICK_HEAD as we do e.g. REBASE_HEAD in a failed rebase let's
rectify that.
When REBASE_HEAD was added in fbd7a23237 (rebase: introduce and use
pseudo-ref REBASE_HEAD, 2018-02-11) a completion was added for it, but
no corresponding completion existed for CHERRY_PICK_HEAD added in
d7e5c0cbfb (Introduce CHERRY_PICK_HEAD, 2011-02-19).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The apply_fragments() method of "git apply"
can silently apply patches incorrectly if
a file has repeating contents. In these
cases a three-way merge is capable of applying
it correctly in more situations, and will
show a conflict rather than applying it
incorrectly. However, because the patches
apply "successfully" using apply_fragments(),
git will never fall back to the merge, even
if the "--3way" flag is used, and the user has
no way to ensure correctness by forcing the
three-way merge method.
Change the behavior so that when "--3way" is used,
git will always try the three-way merge first and
will only fall back to apply_fragments() in cases
where blobs are not available or some other error
(but not in the case of a merge conflict).
Since user-facing results will be different,
this has backwards compatibility implications
for users depending on the old behavior. In
addition, the three-way merge will be slower
than direct patch application.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous logic filled a string list with the names of each remote,
but instead we could simply run the appropriate 'git fetch' data
directly in the remote iterator. Do this for reduced code size, but also
because it sets up an upcoming change to use the remote's refspec. This
data is accessible from the 'struct remote' data that is now accessible
in fetch_remote().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the output we emit on --validate error to:
* Say "FILE:LINE" instead of "FILE: LINE", to match "grep -n",
compiler error messages etc.
* Don't say "patch contains a" after just mentioning the filename,
just leave it at "FILE:LINE: is longer than[...]. The "contains a"
sounded like we were talking about the file in general, when we're
actually checking it line-by-line.
* Don't just say "rejected by sendemail-validate hook", but combine
that with the system_or_msg() output to say what exit code the hook
died with.
I had an aborted attempt to make the line length checker note all
lines that were longer than the limit. I didn't think that was worth
the effort, but I've left in the testing change to check that we die
as soon as we spot the first long line.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the tests that grep substrings out of the output to use a full
test_cmp, in preparation for improving the output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like 'get_murmur3' and 'generate_filter', 'get_filter_for_commit' is a
subcommand of `test-tool bloom` not of `test-tool` itself.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "prefix" was precomposed for macOS in commit 5c327502 (MacOS:
precompose_argv_prefix(), 2021-02-03).
However, this commit forgot to update "startup_info->prefix" after
precomposing.
Move the (possible) precomposition towards the end of
setup_git_directory_gently(), so that precompose_string_if_needed()
can use git_config_get_bool("core.precomposeunicode") correctly.
Keep prefix, startup_info->prefix and GIT_PREFIX_ENVIRONMENT all in sync.
And as a result, the prefix no longer needs to be precomposed in git.c
Reported-by: Dmitry Torilov <d.torilov@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit 5c327502 (MacOS: precompose_argv_prefix(), 2021-02-03) uses
the function precompose_string_if_needed() internally. It is only
used from precompose_argv_prefix() and therefore static in
compat/precompose_utf8.c
Expose this function, it will be used in the next commit.
While there, allow passing a NULL pointer, which will return NULL.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two among the three warnings raised by "make git.info" are related to the fact
that the preface has not id in user-manual.txt.
user-manual.texi:15: warning: empty menu entry name in `* : idm4.'
user-manual.texi:141: warning: @unnumbered missing argument
This causes asciidoc creating an empty preface and an empty title tag in
user-manual.xml which turns to be an empty node in user-manual.texi and
git.info. Consequently, one can notice in user-manual.texi and git.info
a node named "idm4" in the menu and the navigation bar. In emacs, the
first entry of the menu in the git info page is even displayed as empty.
This fix will name "Introduction" the preface and assign it an id.
The result can be seen in the files: user-manual.{xml, texi, html, pdf}
and git.info.
For future reference, the diff between old and new user-manual.xml,
user-manual.texi, git.info, user-manual.html (converted through
html2markdown) and user-manual.pdf (converted through pdftotext) are
attached.
--- before/user-manual.xml 2021-04-04 03:58:47.758008722 +0200
+++ after/user-manual.xml 2021-04-04 03:56:40.520551163 +0200
@@ -7,8 +7,8 @@
<bookinfo>
<title>Git User Manual</title>
</bookinfo>
-<preface>
-<title></title>
+<preface id="_introduction">
+<title>Introduction</title>
<simpara>Git is a fast distributed revision control system.</simpara>
<simpara>This manual is designed to be readable by someone with basic UNIX
command-line skills, but no previous knowledge of Git.</simpara>
--- before/user-manual.texi 2021-04-04 03:58:47.490005652 +0200
+++ after/user-manual.texi 2021-04-04 03:56:40.520551163 +0200
@@ -7,12 +7,12 @@
* Git: (git). A fast distributed revision control system
@end direntry
-@node Top, idm4, , (dir)
+@node Top, Introduction, , (dir)
@documentlanguage en
@top Git User Manual
@menu
-* : idm4.
+* Introduction::
* Repositories and Branches::
* Exploring Git history::
* Developing with Git::
@@ -137,8 +137,8 @@
@end detailmenu
@end menu
-@node idm4, Repositories and Branches, Top, Top
-@unnumbered
+@node Introduction, Repositories and Branches, Top, Top
+@unnumbered Introduction
Git is a fast distributed revision control system.
@@ -178,7 +178,7 @@
Finally, see @ref{Notes and todo list for this manual} for ways that you can help make this manual more
complete.
-@node Repositories and Branches, Exploring Git history, idm4, Top
+@node Repositories and Branches, Exploring Git history, Introduction, Top
@chapter Repositories and Branches
@menu
--- before/git.info 2021-04-04 03:58:46.557994966 +0200
+++ after/git.info 2021-04-04 03:56:40.520551163 +0200
@@ -7,14 +7,14 @@
END-INFO-DIR-ENTRY
-File: git.info, Node: Top, Next: idm4, Up: (dir)
+File: git.info, Node: Top, Next: Introduction, Up: (dir)
Git User Manual
***************
* Menu:
-* : idm4.
+* Introduction::
* Repositories and Branches::
* Exploring Git history::
* Developing with Git::
@@ -137,7 +137,10 @@
-File: git.info, Node: idm4, Next: Repositories and Branches, Prev: Top, Up: Top
+File: git.info, Node: Introduction, Next: Repositories and Branches, Prev: Top, Up: Top
+
+Introduction
+************
Git is a fast distributed revision control system.
@@ -174,7 +177,7 @@
that you can help make this manual more complete.
-File: git.info, Node: Repositories and Branches, Next: Exploring Git history, Prev: idm4, Up: Top
+File: git.info, Node: Repositories and Branches, Next: Exploring Git history, Prev: Introduction, Up: Top
1 Repositories and Branches
***************************
@@ -5471,207 +5474,207 @@
...
Tag Table:
Node: Top212
-Node: idm43164
-Node: Repositories and Branches4465
...
+Node: Introduction3179
+Node: Repositories and Branches4515
+Node: How to get a Git repository5128
...
End Tag Table
--- before/user-manual.html.md 2021-04-04 05:20:55.378695854 +0200
+++ after/user-manual.html.md 2021-04-04 05:21:11.282850802 +0200
@@ -4,6 +4,8 @@
**Table of Contents**
+Introduction
+
1\. Repositories and Branches
@@ -278,7 +280,7 @@
Todo list
-#
+# Introduction
Git is a fast distributed revision control system.
--- before/user-manual.pdf.txt 2021-04-04 05:28:20.367036836 +0200
+++ after/user-manual.pdf.txt 2021-04-04 05:30:01.680026312 +0200
@@ -487,6 +487,7 @@
vii
+Introduction
Git is a fast distributed revision control system.
This manual is designed to be readable by someone with basic UNIX command-line skills, but no previous knowledge of Git.
Chapter 1 and Chapter 2 explain how to fetch and study a project using git—read these chapters to learn how to build and test a
Signed-off-by: Firmin Martin <firminmartin24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch -v<n>" learned to allow a reroll count that is
not an integer.
* zh/format-patch-fractional-reroll-count:
format-patch: allow a non-integral version numbers
A simple IPC interface gets introduced to build services like
fsmonitor on top.
* jh/simple-ipc:
t0052: add simple-ipc tests and t/helper/test-simple-ipc tool
simple-ipc: add Unix domain socket implementation
unix-stream-server: create unix domain socket under lock
unix-socket: disallow chdir() when creating unix domain sockets
unix-socket: add backlog size option to unix_stream_listen()
unix-socket: eliminate static unix_stream_socket() helper function
simple-ipc: add win32 implementation
simple-ipc: design documentation for new IPC mechanism
pkt-line: add options argument to read_packetized_to_strbuf()
pkt-line: add PACKET_READ_GENTLE_ON_READ_ERROR option
pkt-line: do not issue flush packets in write_packetized_*()
pkt-line: eliminate the need for static buffer in packet_write_gently()
Preparatory API changes for parallel checkout.
* mt/parallel-checkout-part-1:
entry: add checkout_entry_ca() taking preloaded conv_attrs
entry: move conv_attrs lookup up to checkout_entry()
entry: extract update_ce_after_write() from write_entry()
entry: make fstat_output() and read_blob_entry() public
entry: extract a header file for entry.c functions
convert: add classification for conv_attrs struct
convert: add get_stream_filter_ca() variant
convert: add [async_]convert_to_working_tree_ca() variants
convert: make convert_attrs() and convert structs public
While using "map" instead of "for" or "map" instead of "grep" and
vice-versa makes for interesting trivia questions when interviewing
Perl programmers, it doesn't make for very readable code. Let's
refactor this loop initially added in 8fd5bb7f44 (git send-email: add
--annotate option, 2008-11-11) to be a for-loop instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't show the very verbose $(FIND_SOURCE_FILES) command on every
"make TAGS" invocation.
Let's use "generate into temporary and rename to the final file,
after seeing the command that generated the output finished
successfully" pattern, to avoid leaving a file with an incorrect
output generated by a failed command.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a lot of pointer dereferencing in the pre-image version of
'midx_pack_order_cmp()', which this patch gets rid of.
Instead of comparing the pack preferred-ness and then the pack id, both
of these checks are done at the same time by using the high-order bit of
the pack id to represent whether it's preferred. Then the pack id and
offset are compared as usual.
This produces the same result so long as there are less than 2^31 packs,
which seems like a likely assumption to make in practice.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement the writing half of multi-pack reverse indexes. This is
nothing more than the format describe a few patches ago, with a new set
of helper functions that will be used to clear out stale .rev files
corresponding to old MIDXs.
Unfortunately, a very similar comparison function as the one implemented
recently in pack-revindex.c is reimplemented here, this time accepting a
MIDX-internal type. An effort to DRY these up would create more
indirection and overhead than is necessary, so it isn't pursued here.
Currently, there are no callers which pass the MIDX_WRITE_REV_INDEX
flag, meaning that this is all dead code. But, that won't be the case
for long, since subsequent patches will introduce the multi-pack bitmap,
which will begin passing this field.
(In midx.c:write_midx_internal(), the two adjacent if statements share a
conditional, but are written separately since the first one will
eventually also handle the MIDX_WRITE_BITMAP flag, which does not yet
exist.)
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Existing callers provide the reverse index code with an array of 'struct
pack_idx_entry *'s, which is then sorted by pack order (comparing the
offsets of each object within the pack).
Prepare for the multi-pack index to write a .rev file by providing a way
to write the reverse index without an array of pack_idx_entry (which the
MIDX code does not have).
Instead, callers can invoke 'write_rev_index_positions()', which takes
an array of uint32_t's. The ith entry in this array specifies the ith
object's (in index order) position within the pack (in pack order).
Expose this new function for use in a later patch, and rewrite the
existing write_rev_file() in terms of this new function.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement reading for multi-pack reverse indexes, as described in the
previous patch.
Note that these functions don't yet have any callers, and won't until
multi-pack reachability bitmaps are introduced in a later patch series.
In the meantime, this patch implements some of the infrastructure
necessary to support multi-pack bitmaps.
There are three new functions exposed by the revindex API:
- load_midx_revindex(): loads the reverse index corresponding to the
given multi-pack index.
- midx_to_pack_pos() and pack_pos_to_midx(): these convert between the
multi-pack index and pseudo-pack order.
load_midx_revindex() and pack_pos_to_midx() are both relatively
straightforward.
load_midx_revindex() needs a few functions to be exposed from the midx
API. One to get the checksum of a midx, and another to get the .rev's
filename. Similar to recent changes in the packed_git struct, three new
fields are added to the multi_pack_index struct: one to keep track of
the size, one to keep track of the mmap'd pointer, and another to point
past the header and at the reverse index's data.
pack_pos_to_midx() simply reads the corresponding entry out of the
table.
midx_to_pack_pos() is the trickiest, since it needs to find an object's
position in the psuedo-pack order, but that order can only be recovered
in the .rev file itself. This mapping can be implemented with a binary
search, but note that the thing we're binary searching over isn't an
array of values, but rather a permuted order of those values.
So, when comparing two items, it's helpful to keep in mind the
difference. Instead of a traditional binary search, where you are
comparing two things directly, here we're comparing a (pack, offset)
tuple with an index into the multi-pack index. That index describes
another (pack, offset) tuple, and it is _those_ two tuples that are
compared.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a prerequisite to implementing multi-pack bitmaps, motivate and
describe the format and ordering of the multi-pack reverse index.
The subsequent patch will implement reading this format, and the patch
after that will implement writing it while producing a multi-pack index.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a subsequent commit, pack-revindex.c will become responsible for
sorting a list of objects in the "MIDX pack order" (which will be
defined in the following patch). To do so, it will need to be know the
pack identifier and offset within that pack for each object in the MIDX.
The MIDX code already has functions for doing just that
(nth_midxed_offset() and nth_midxed_pack_int_id()), but they are
statically declared.
Since there is no reason that they couldn't be exposed publicly, and
because they are already doing exactly what the caller in
pack-revindex.c will want, expose them publicly so that they can be
reused there.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_midx_internal() uses a hashfile to write the multi-pack index, but
discards its checksum. This makes sense, since nothing that takes place
after writing the MIDX cares about its checksum.
That is about to change in a subsequent patch, when the optional
reverse index corresponding to the MIDX will want to include the MIDX's
checksum.
Store the checksum of the MIDX in preparation for that.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent patch will need to refer back to 'midx_name' later on in
the function. In fact, this variable is already free()'d later on, so
this makes the later free() no longer redundant.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When multiple packs in the multi-pack index contain the same object, the
MIDX machinery must make a choice about which pack it associates with
that object. Prior to this patch, the lowest-ordered[1] pack was always
selected.
Pack selection for duplicate objects is relatively unimportant today,
but it will become important for multi-pack bitmaps. This is because we
can only invoke the pack-reuse mechanism when all of the bits for reused
objects come from the reuse pack (in order to ensure that all reused
deltas can find their base objects in the same pack).
To encourage the pack selection process to prefer one pack over another
(the pack to be preferred is the one a caller would like to later use as
a reuse pack), introduce the concept of a "preferred pack". When
provided, the MIDX code will always prefer an object found in a
preferred pack over any other.
No format changes are required to store the preferred pack, since it
will be able to be inferred with a corresponding MIDX bitmap, by looking
up the pack associated with the object in the first bit position (this
ordering is described in detail in a subsequent commit).
[1]: the ordering is specified by MIDX internals; for our purposes we
can consider the "lowest ordered" pack to be "the one with the
most-recent mtime.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some scenarios, users may want more history than the repository
offered for cloning, which happens to be a shallow repository, can
give them. But because users don't know it is a shallow repository
until they download it to local, we may want to refuse to clone
this kind of repository, without creating any unnecessary files.
The '--depth=x' option cannot be used as a solution; the source may
be deep enough to give us 'x' commits when cloned, but the user may
later need to deepen the history to arbitrary depth.
Teach '--reject-shallow' option to "git clone" to abort as soon as
we find out that we are cloning from a shallow repository.
Signed-off-by: Li Linchao <lilinchao@oschina.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After we run parse_object_buffer() to get an object's contents, we try
to check that the return value wasn't NULL. However, since our "struct
object" is a pointer-to-pointer, and we assign like:
*obj = parse_object_buffer(...);
it's not correct to check:
if (!obj)
That will always be true, since our double pointer will continue to
point to the single pointer (which is itself NULL). This is a regression
that was introduced by aa46a0da30 (ref-filter: use oid_object_info() to
get object, 2018-07-17); since that commit we'll segfault on a parse
failure, as we try to look at the NULL object pointer.
There are many ways a parse could fail, but most of them are hard to set
up in the tests (it's easy to make a bogus object, but update-ref will
refuse to point to it). The test here uses a tag which points to a wrong
object type. A parse of just the broken tag object will succeed, but
seeing both tag objects in the same process will lead to a parse error
(since we'll see the pointed-to object as both types).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a new pack with a bitmap, it is sometimes convenient to
indicate some reference prefixes which should receive priority when
selecting which commits to receive bitmaps.
A truly motivated caller could accomplish this by setting
'pack.islandCore', (since all commits in the core island are similarly
marked as preferred) but this requires callers to opt into using delta
islands, which they may or may not want to do.
Introduce a new multi-valued configuration, 'pack.preferBitmapTips' to
allow callers to specify a list of reference prefixes. All references
which have a prefix contained in 'pack.preferBitmapTips' will mark their
tips as "preferred" in the same way as commits are marked as preferred
for selection by 'pack.islandCore'.
The choice of the verb "prefer" is intentional: marking the NEEDS_BITMAP
flag on an object does *not* guarantee that that object will receive a
bitmap. It merely guarantees that that commit will receive a bitmap over
any *other* commit in the same window by bitmap_writer_select_commits().
The test this patch adds reflects this quirk, too. It only tests that
a commit (which didn't receive bitmaps by default) is selected for
bitmaps after changing the value of 'pack.preferBitmapTips' to include
it. Other commits may lose their bitmaps as a byproduct of how the
selection process works (bitmap_writer_select_commits() ignores the
remainder of a window after seeing a commit with the NEEDS_BITMAP flag).
This configuration will aide in selecting important references for
multi-pack bitmaps, since they do not respect the same pack.islandCore
configuration. (They could, but doing so may be confusing, since it is
packs--not bitmaps--which are influenced by the delta-islands
configuration).
In a fork network repository (one which lists all forks of a given
repository as remotes), for example, it is useful to set
pack.preferBitmapTips to 'refs/remotes/<root>/heads' and
'refs/remotes/<root>/tags', where '<root>' is an opaque identifier
referring to the repository which is at the base of the fork chain.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new 'bitmap' test-tool which can be used to list the commits that
have received bitmaps.
In theory, a determined tester could run 'git rev-list --test-bitmap
<commit>' to check if '<commit>' received a bitmap or not, since
'--test-bitmap' exits with a non-zero code when it can't find the
requested commit.
But this is a dubious behavior to rely on, since arguably 'git
rev-list' could continue its object walk outside of which commits are
covered by bitmaps.
This will be used to test the behavior of 'pack.preferBitmapTips', which
will be added in the following patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next patch will add a 'bitmap' test-tool which prints the list of
commits that have bitmaps computed.
The test helper could implement this itself, but it would need access to
the 'bitmaps' field of the 'pack_bitmap' struct. To avoid exposing this
private detail, implement the entirety of the helper behind a
test_bitmap_commits() function in pack-bitmap.c.
There is some precedence for this with test_bitmap_walk() which is used
to implement the '--test-bitmap' flag in 'git rev-list' (and is also
implemented in pack-bitmap.c).
A caller will be added in the next patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
save_opts() should save any non-default values. It was intended to do
this, but since most options in struct replay_opts default to 0, it only
saved non-zero values. Unfortunately, this does not always work for
options.edit. Roughly speaking, options.edit had a default value of 0
for cherry-pick but a default value of 1 for revert. Make save_opts()
record a value whenever it differs from the default.
options.edit was also overly simplistic; we had more than two cases.
The behavior that previously existed was as follows:
Non-conflict commits Right after Conflict
revert Edit iff isatty(0) Edit (ignore isatty(0))
cherry-pick No edit See above
Specify --edit Edit (ignore isatty(0)) See above
Specify --no-edit (*) See above
(*) Before stopping for conflicts, No edit is the behavior. After
stopping for conflicts, the --no-edit flag is not saved so see
the first two rows.
However, the expected behavior is:
Non-conflict commits Right after Conflict
revert Edit iff isatty(0) Edit iff isatty(0)
cherry-pick No edit Edit iff isatty(0)
Specify --edit Edit (ignore isatty(0)) Edit (ignore isatty(0))
Specify --no-edit No edit No edit
In order to get the expected behavior, we need to change options.edit
to a tri-state: unspecified, false, or true. When specified, we follow
what it says. When unspecified, we need to check whether the current
commit being created is resolving a conflict as well as consulting
options.action and isatty(0). While at it, add a should_edit() utility
function that compresses options.edit down to a boolean based on the
additional information for the non-conflict case.
continue_single_pick() is the function responsible for resuming after
conflict cases, regardless of whether there is one commit being picked
or many. Make this function stop assuming edit behavior in all cases,
so that it can correctly handle !isatty(0) and specific requests to not
edit the commit message.
Reported-by: Renato Botelho <garga@freebsd.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Explain pieces of the format-patch output upfront before the rest
of the documentation starts referring to them.
* jc/doc-format-patch-clarify:
format-patch: give an overview of what a "patch" message is
Remove the final hint that we used to have a scripted "git rebase".
* ab/remove-rebase-usebuiltin:
rebase: remove transitory rebase.useBuiltin setting & env
When accessing a server with a URL like https://user:pass@site/, we
did not to fall back to the basic authentication with the
credential material embedded in the URL after the "Negotiate"
authentication failed. Now we do.
* cs/http-use-basic-after-failed-negotiate:
remote-curl: fall back to basic auth if Negotiate fails
More test coverage over "diff --no-index".
* ab/diff-no-index-tests:
diff --no-index tests: test mode normalization
diff --no-index tests: add test for --exit-code
Code simplification by removing support for a caller that is long gone.
* ab/read-tree:
tree.h API: simplify read_tree_recursive() signature
tree.h API: expose read_tree_1() as read_tree_at()
archive: stop passing "stage" through read_tree_recursive()
ls-files: refactor away read_tree()
ls-files: don't needlessly pass around stage variable
tree.c API: move read_tree() into builtin/ls-files.c
ls-files tests: add meaningful --with-tree tests
show tests: add test for "git show <tree>"
When "git checkout" removes a path that does not exist in the
commit it is checking out, it wasn't careful enough not to follow
symbolic links, which has been corrected.
* mt/checkout-remove-nofollow:
checkout: don't follow symlinks when removing entries
symlinks: update comment on threaded_check_leading_path()
p2000-sparse-operations.sh compares different Git commands in
repositories with many files at HEAD but using sparse-checkout to focus
on a small portion of those files.
Add extra copies of the repository that use the sparse-index format so
we can track how that affects the performance of different commands.
At this point in time, the sparse-index is 100% overhead from the CPU
front, and this is measurable in these tests:
Test
---------------------------------------------------------------
2000.2: git status (full-index-v3) 0.59(0.51+0.12)
2000.3: git status (full-index-v4) 0.59(0.52+0.11)
2000.4: git status (sparse-index-v3) 1.40(1.32+0.12)
2000.5: git status (sparse-index-v4) 1.41(1.36+0.08)
2000.6: git add -A (full-index-v3) 2.32(1.97+0.19)
2000.7: git add -A (full-index-v4) 2.17(1.92+0.14)
2000.8: git add -A (sparse-index-v3) 2.31(2.21+0.15)
2000.9: git add -A (sparse-index-v4) 2.30(2.20+0.13)
2000.10: git add . (full-index-v3) 2.39(2.02+0.20)
2000.11: git add . (full-index-v4) 2.20(1.94+0.16)
2000.12: git add . (sparse-index-v3) 2.36(2.27+0.12)
2000.13: git add . (sparse-index-v4) 2.33(2.21+0.16)
2000.14: git commit -a -m A (full-index-v3) 2.47(2.12+0.20)
2000.15: git commit -a -m A (full-index-v4) 2.26(2.00+0.17)
2000.16: git commit -a -m A (sparse-index-v3) 3.01(2.92+0.16)
2000.17: git commit -a -m A (sparse-index-v4) 3.01(2.94+0.15)
Note that there is very little difference between the v3 and v4 index
formats when the sparse-index is enabled. This is primarily due to the
fact that the relative file sizes are the same, and the command time is
mostly taken up by parsing tree objects to expand the sparse index into
a full one.
With the current file layout, the index file sizes are given by this
table:
| full index | sparse index |
+-------------+--------------+
v3 | 108 MiB | 1.6 MiB |
v4 | 80 MiB | 1.2 MiB |
Future updates will improve the performance of Git commands when the
index is sparse.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The cache_tree_verify() method is run when GIT_TEST_CHECK_CACHE_TREE
is enabled, which it is by default in the test suite. The logic must
be adjusted for the presence of these directory entries.
For now, leave the test as a simple check for whether the directory
entry is sparse. Do not go any further until needed.
This allows us to re-enable GIT_TEST_CHECK_CACHE_TREE in
t1092-sparse-checkout-compatibility.sh. Further,
p2000-sparse-operations.sh uses the test suite and hence this is enabled
for all tests. We need to integrate with it before we run our
performance tests with a sparse-index.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The cache-tree extension was previously disabled with sparse indexes.
However, the cache-tree is an important performance feature for commands
like 'git status' and 'git add'. Integrate it with sparse directory
entries.
When writing a sparse index, completely clear and recalculate the cache
tree. By starting from scratch, the only integration necessary is to
check if we hit a sparse directory entry and create a leaf of the
cache-tree that has an entry_count of one and no subtrees.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use 'git sparse-checkout init --cone --sparse-index' to toggle the
sparse-index feature. It makes sense to also disable it when running
'git sparse-checkout disable'. This is particularly important because it
removes the extensions.sparseIndex config option, allowing other tools
to use this Git repository again.
This does mean that 'git sparse-checkout init' will not re-enable the
sparse-index feature, even if it was previously enabled.
While testing this feature, I noticed that the sparse-index was not
being written on the first run, but by a second. This was caught by the
call to 'test-tool read-cache --table'. This requires adjusting some
assignments to core_apply_sparse_checkout and pl.use_cone_patterns in
the sparse_checkout_init() logic.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse index extension is used to signal that index writes should be
in sparse mode. This was only updated using GIT_TEST_SPARSE_INDEX=1.
Add a '--[no-]sparse-index' option to 'git sparse-checkout init' that
specifies if the sparse index should be used. It also updates the index
to use the correct format, either way. Add a warning in the
documentation that the use of a repository extension might reduce
compatibility with third-party tools. 'git sparse-checkout init' already
sets extension.worktreeConfig, which places most sparse-checkout users
outside of the scope of most third-party tools.
Update t1092-sparse-checkout-compatibility.sh to use this CLI instead of
GIT_TEST_SPARSE_INDEX=1.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When enabled, this config option signals that index writes should
attempt to use sparse-directory entries.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test case that uses test_region to ensure that we are truly
expanding a sparse index to a full one, then converting back to sparse
when writing the index. As we integrate more Git commands with the
sparse index, we will convert these commands to check that we do _not_
convert the sparse index to a full index and instead stay sparse the
entire time.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The index_pos_by_traverse_info() currently throws a BUG() when a
directory entry exists exactly in the index. We need to consider that it
is possible to have a directory in a sparse index as long as that entry
is itself marked with the skip-worktree bit.
The 'pos' variable is assigned a negative value if an exact match is not
found. Since a directory name can be an exact match, it is no longer an
error to have a nonnegative 'pos' value.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A submodule is stored as a "Git link" that actually points to a commit
within a submodule. Submodules are populated or not depending on
submodule configuration, not sparse-checkout. To ensure that the
sparse-index feature integrates correctly with submodules, we should not
collapse a directory if there is a Git link within its range.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we have a full index, then we can convert it to a sparse index by
replacing directories outside of the sparse cone with sparse directory
entries. The convert_to_sparse() method does this, when the situation is
appropriate.
For now, we avoid converting the index to a sparse index if:
1. the index is split.
2. the index is already sparse.
3. sparse-checkout is disabled.
4. sparse-checkout does not use cone mode.
Finally, we currently limit the conversion to when the
GIT_TEST_SPARSE_INDEX environment variable is enabled. A mode using Git
config will be added in a later change.
The trickiest thing about this conversion is that we might not be able
to mark a directory as a sparse directory just because it is outside the
sparse cone. There might be unmerged files within that directory, so we
need to look for those. Also, if there is some strange reason why a file
is not marked with CE_SKIP_WORKTREE, then we should give up on
converting that directory. There is still hope that some of its
subdirectories might be able to convert to sparse, so we keep looking
deeper.
The conversion process is assisted by the cache-tree extension. This is
calculated from the full index if it does not already exist. We then
abandon the cache-tree as it no longer applies to the newly-sparse
index. Thus, this cache-tree will be recalculated in every
sparse-full-sparse round-trip until we integrate the cache-tree
extension with the sparse index.
Some Git commands use the index after writing it. For example, 'git add'
will update the index, then write it to disk, then read its entries to
report information. To keep the in-memory index in a full state after
writing, we re-expand it to a full one after the write. This is wasteful
for commands that only write the index and do not read from it again,
but that is only the case until we make those commands "sparse aware."
We can compare the behavior of the sparse-index in
t1092-sparse-checkout-compability.sh by using GIT_TEST_SPARSE_INDEX=1
when operating on the 'sparse-index' repo. We can also compare the two
sparse repos directly, such as comparing their indexes (when expanded to
full in the case of the 'sparse-index' repo). We also verify that the
index is actually populated with sparse directory entries.
The 'checkout and reset (mixed)' test is marked for failure when
comparing a sparse repo to a full repo, but we can compare the two
sparse-checkout cases directly to ensure that we are not changing the
behavior when using a sparse index.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The index format does not currently allow for sparse directory entries.
This violates some expectations that older versions of Git or
third-party tools might not understand. We need an indicator inside the
index file to warn these tools to not interact with a sparse index
unless they are aware of sparse directory entries.
Add a new _required_ index extension, 'sdir', that indicates that the
index may contain sparse directory entries. This allows us to continue
to use the differences in index formats 2, 3, and 4 before we create a
new index version 5 in a later change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we modify the sparse-checkout definition, we perform index operations
on a pattern_list that only exists in-memory. This allows easy backing
out in case the index update fails.
However, if the index write itself cares about the sparse-checkout
pattern set, we need access to that in-memory copy. Place a pointer to
a 'struct pattern_list' in the index so we can access this on-demand.
This will be used in the next change which uses the sparse-checkout
definition to filter out directories that are outside the sparse cone.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next change will translate full indexes into sparse indexes at write
time. The existing logic provides a way for every sparse index to be
expanded to a full index at read time. However, there are cases where an
index is written and then continues to be used in-memory to perform
further updates.
unpack_trees() is frequently called after such a write. In particular,
commands like 'git reset' do this double-update of the index.
Ensure that we have a full index when entering unpack_trees(), but only
when command_requires_full_index is true. This is always true at the
moment, but we will later relax that after unpack_trees() is updated to
handle sparse directory entries.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will use 'test-tool read-cache --table' to check that a sparse
index is written as part of init_repos. Since we will no longer always
expand a sparse index into a full index, add an '--expand' parameter
that adds a call to ensure_full_index() so we can compare a sparse index
directly against a full index, or at least what the in-memory index
looks like when expanded in this way.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This table is helpful for discovering data in the index to ensure it is
being written correctly, especially as we build and test the
sparse-index. This table includes an output format similar to 'git
ls-tree', but should not be compared to that directly. The biggest
reasons are that 'git ls-tree' includes a tree entry for every
subdirectory, even those that would not appear as a sparse directory in
a sparse-index. Further, 'git ls-tree' does not use a trailing directory
separator for its tree rows.
This does not print the stat() information for the blobs. That will be
added in a future change with another option. The tests that are added
in the next few changes care only about the object types and IDs.
However, this future need for full index information justifies the need
for this test helper over extending a user-facing feature, such as 'git
ls-files'.
To make the option parsing slightly more robust, wrap the string
comparisons in a loop adapted from test-dir-iterator.c.
Care must be taken with the final check for the 'cnt' variable. We
continue the expectation that the numerical value is the final argument.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new 'sparse-index' repo alongside the 'full-checkout' and
'sparse-checkout' repos in t1092-sparse-checkout-compatibility.sh. Also
add run_on_sparse and test_sparse_match helpers. These helpers will be
used when the sparse index is implemented.
Add the GIT_TEST_SPARSE_INDEX environment variable to enable the
sparse-index by default. This can be enabled across all tests, but that
will only affect cases where the sparse-checkout feature is enabled.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will mark an in-memory index_state as having sparse directory entries
with the sparse_index bit. These currently cannot exist, but we will add
a mechanism for collapsing a full index to a sparse one in a later
change. That will happen at write time, so we must first allow parsing
the format before writing it.
Commands or methods that require a full index in order to operate can
call ensure_full_index() to expand that index in-memory. This requires
parsing trees using that index's repository.
Sparse directory entries have a specific 'ce_mode' value. The macro
S_ISSPARSEDIR(ce->ce_mode) can check if a cache_entry 'ce' has this type.
This ce_mode is not possible with the existing index formats, so we don't
also verify all properties of a sparse-directory entry, which are:
1. ce->ce_mode == 0040000
2. ce->flags & CE_SKIP_WORKTREE is true
3. ce->name[ce->namelen - 1] == '/' (ends in dir separator)
4. ce->oid references a tree object.
These are all semi-enforced in ensure_full_index() to some extent. Any
deviation will cause a warning at minimum or a failure in the worst
case.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Upcoming changes will introduce modifications to the index format that
allow sparse directories. It will be useful to have a mechanism for
converting those sparse index files into full indexes by walking the
tree at those sparse directories. Name this method ensure_full_index()
as it will guarantee that the index is fully expanded.
This method is not implemented yet, and instead we focus on the
scaffolding to declare it and call it at the appropriate time.
Add a 'command_requires_full_index' member to struct repo_settings. This
will be an indicator that we need the index in full mode to do certain
index operations. This starts as being true for every command, then we
will set it to false as some commands integrate with sparse indexes.
If 'command_requires_full_index' is true, then we will immediately
expand a sparse index to a full one upon reading from disk. This
suffices for now, but we will want to add more callers to
ensure_full_index() later.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test was introduced in 19a0acc83e (t1092: test interesting
sparse-checkout scenarios, 2021-01-23), but it contains issues with quoting
that were not noticed until starting this follow-up series. The old
mechanism would drop quoting such as in
test_all_match git commit -m "touch README.md"
The above happened to work because README.md is a file in the
repository, so 'git commit -m touch REAMDE.md' would succeed by
accident.
Other cases included quoting for no good reason, so clean that up now.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a test script that takes the default performance test (the Git
codebase) and multiplies it by 256 using four layers of duplicated
trees of width four. This results in nearly one million blob entries in
the index. Then, we can clone this repository with sparse-checkout
patterns that demonstrate four copies of the initial repository. Each
clone will use a different index format or mode so peformance can be
tested across the different options.
Note that the initial repo is stripped of submodules before doing the
copies. This preserves the expected data shape of the sparse index,
because directories containing submodules are not collapsed to a sparse
directory entry.
Run a few Git commands on these clones, especially those that use the
index (status, add, commit).
Here are the results on my Linux machine:
Test
--------------------------------------------------------------
2000.2: git status (full-index-v3) 0.37(0.30+0.09)
2000.3: git status (full-index-v4) 0.39(0.32+0.10)
2000.4: git add -A (full-index-v3) 1.42(1.06+0.20)
2000.5: git add -A (full-index-v4) 1.26(0.98+0.16)
2000.6: git add . (full-index-v3) 1.40(1.04+0.18)
2000.7: git add . (full-index-v4) 1.26(0.98+0.17)
2000.8: git commit -a -m A (full-index-v3) 1.42(1.11+0.16)
2000.9: git commit -a -m A (full-index-v4) 1.33(1.08+0.16)
It is perhaps noteworthy that there is an improvement when using index
version 4. This is because the v3 index uses 108 MiB while the v4
index uses 80 MiB. Since the repeated portions of the directories are
very short (f3/f1/f2, for example) this ratio is less pronounced than in
similarly-sized real repositories.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This begins a long effort to update the index format to allow sparse
directory entries. This should result in a significant improvement to
Git commands when HEAD contains millions of files, but the user has
selected many fewer files to keep in their sparse-checkout definition.
Currently, the index format is only updated in the presence of
extensions.sparseIndex instead of increasing a file format version
number. This is temporary, and index v5 is part of the plan for future
work in this area.
The design document details many of the reasons for embarking on this
work, and also the plan for completing it safely.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'read-midx' helper is used in places like t5319 to display basic
information about a multi-pack-index.
In the next patch, the MIDX writing machinery will learn a new way to
choose from which pack an object is selected when multiple copies of
that object exist.
To disambiguate which pack introduces an object so that this feature can
be tested, add a '--show-objects' option which displays additional
information about each object in the MIDX.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When given a sub-command that it doesn't understand, 'git
multi-pack-index' dies with the following message:
$ git multi-pack-index bogus
fatal: unrecognized subcommand: bogus
Instead of 'die()'-ing, we can display the usage text, which is much
more helpful:
$ git.compile multi-pack-index bogus
error: unrecognized subcommand: bogus
usage: git multi-pack-index [<options>] write
or: git multi-pack-index [<options>] verify
or: git multi-pack-index [<options>] expire
or: git multi-pack-index [<options>] repack [--batch-size=<size>]
--object-dir <file> object directory containing set of packfile and pack-index pairs
--progress force progress reporting
While we're at it, clean up some duplication between the "no sub-command"
and "unrecognized sub-command" conditionals.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even before the recent refactoring, 'git multi-pack-index' calls
'trace2_cmd_mode()' before verifying that the sub-command is recognized.
Push this call down into the individual sub-commands so that we don't
enter a bogus command mode.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Handle sub-commands of the 'git multi-pack-index' builtin (e.g.,
"write", "repack", etc.) separately from one another. This allows
sub-commands with unique options, without forcing cmd_multi_pack_index()
to reject invalid combinations itself.
This comes at the cost of some duplication and boilerplate. Luckily, the
duplication is reduced to a minimum, since common options are shared
among sub-commands due to a suggestion by Ævar. (Sub-commands do have to
retain the common options, too, since this builtin accepts common
options on either side of the sub-command).
Roughly speaking, cmd_multi_pack_index() parses options (including
common ones), and stops at the first non-option, which is the
sub-command. It then dispatches to the appropriate sub-command, which
parses the remaining options (also including common options).
Unknown options are kept by the sub-commands in order to detect their
presence (and complain that too many arguments were given).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the usage message into pieces corresponding to each mode.
This avoids options specific to one sub-command from being shared with
another in the usage.
A subsequent commit will use these #define macros to have usage
variables for each sub-command without duplicating their contents.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that there is a shared 'flags' member in the options structure,
there is no need to keep track of whether to force progress or not,
since ultimately the decision of whether or not to show a progress meter
is controlled by a bit in the flags member.
Manipulate that bit directly, and drop the now-unnecessary 'progress'
field while we're at it.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subcommands of the 'git multi-pack-index' command (e.g., 'write',
'verify', etc.) will want to optionally change a set of shared flags
that are eventually passed to the MIDX libraries.
Right now, options and flags are handled separately. That's fine, since
the options structure is never passed around. But a future patch will
make it so that common options shared by all sub-commands are defined in
a common location. That means that "flags" would have to become a global
variable.
Group it with the options structure so that we reduce the number of
global variables we have overall.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is customary not to begin the help text for each option given to
the parse-options API with a capital letter. Various (sub)commands'
option arrays don't follow the guideline provided by the parse_options
Documentation regarding the descriptions.
Downcase the first word of some option descriptions for "column"
and "range-diff".
Signed-off-by: Chinmoy Chakraborty <chinmoy12c@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our CMake configuration generates not only build definitions, but also
install definitions: After building Git using `msbuild git.sln`, the
built artifacts can be installed via `msbuild INSTALL.vcxproj`.
To specify _where_ the files should be installed, the
`-DCMAKE_INSTALL_PREFIX=<path>` option can be used when running CMake.
However, this process would really only install the files that were just
built. On Windows, we need more than that: We also need the `.dll` files
of the dependencies (such as libcurl). The `vcpkg` ecosystem, which we
use to obtain those dependencies, can be asked to install said `.dll`
files really easily, so let's do that.
This requires more than just the built `vcpkg` artifacts in the CI build
definition; We now clone the `vcpkg` repository so that the relevant
CMake scripts are available, in particular the ones related to defining
the toolchain.
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are about to add support for installing the `.dll` files of Git's
dependencies (such as libcurl) in the CMake configuration. The `vcpkg`
ecosystem from which we get said dependencies makes that relatively
easy: simply turn on `X_VCPKG_APPLOCAL_DEPS_INSTALL`.
However, current `vcpkg` introduces a limitation if one does that:
While it is totally cool with CMake to specify multiple targets within
one invocation of `install(TARGETS ...) (at least according to
https://cmake.org/cmake/help/latest/command/install.html#command:install),
`vcpkg`'s parser insists on a single target per `install(TARGETS ...)`
invocation.
Well, that's easily accomplished: Let's feed the targets individually to
the `install(TARGETS ...)` function in a `foreach()` look.
This also has the advantage that we do not have to manually cull off the
two entries from the `${PROGRAMS_BUILT}` array before scheduling the
remainder to be installed into `libexec/git-core`. Instead, we iterate
through the array and decide for each entry where it wants to go.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the check added in 5476e1efde (fetch-pack: print and use
dangling .gitmodules, 2021-02-22) to make use of us now passing the
"msg_id" to the user defined "error_func". We can now compare against
the FSCK_MSG_GITMODULES_MISSING instead of parsing the generated
message.
Let's also replace register_found_gitmodules() with directly
manipulating the "gitmodules_found" member. A recent commit moved it
into "fsck_options" so we could do this here.
I'm sticking this callback in fsck.c. Perhaps in the future we'd like
to accumulate such callbacks into another file (maybe fsck-cb.c,
similar to parse-options-cb.c?), but while we've got just the one
let's just put it into fsck.c.
A better alternative in this case would be some library some more
obvious library shared by fetch-pack.c ad builtin/index-pack.c, but
there isn't such a thing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code added in 5476e1efde (fetch-pack: print and use dangling
.gitmodules, 2021-02-22) so that we use a file-scoped "static struct
fsck_options" instead of defining one in the "fsck_gitmodules_oids()"
function.
We use this pattern in all of
builtin/{fsck,index-pack,mktag,unpack-objects}.c. It's odd to see
fetch-pack be the odd one out. One might think that we're using other
fsck_options structs in fetch-pack, or doing on fsck twice there, but
we're not.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the behavior of the .gitmodules validation added in
5476e1efde (fetch-pack: print and use dangling .gitmodules,
2021-02-22) so we're using one "fsck_options".
I found that code confusing to read. One might think that not setting
up the error_func earlier means that we're relying on the "error_func"
not being set in some code in between the two hunks being modified
here.
But we're not, all we're doing in the rest of "cmd_index_pack()" is
further setup by calling fsck_set_msg_types(), and assigning to
do_fsck_object.
So there was no reason in 5476e1efde to make a shallow copy of the
fsck_options struct before setting error_func. Let's just do this
setup at the top of the function, along with the "walk" assignment.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the gitmodules_{found,done} static variables added in
159e7b080b (fsck: detect gitmodules files, 2018-05-02) into the
fsck_options struct. It makes sense to keep all the context in the
same place.
This requires changing the recently added register_found_gitmodules()
function added in 5476e1efde (fetch-pack: print and use dangling
.gitmodules, 2021-02-22) to take fsck_options. That function will be
removed in a subsequent commit, but as it'll require the new
gitmodules_found attribute of "fsck_options" we need this intermediate
step first.
An earlier version of this patch removed the small amount of
duplication we now have between FSCK_OPTIONS_{DEFAULT,STRICT} with a
FSCK_OPTIONS_COMMON macro. I don't think such de-duplication is worth
it for this amount of copy/pasting.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code I added in acf9de4c94 (mktag: use fsck instead of custom
verify_tag(), 2021-01-05) to make use of a new API function that takes
the fsck_msg_{id,type} types, instead of arbitrary strings that
we'll (hopefully) parse into those types.
At the time that the fsck_set_msg_type() API was introduced in
0282f4dced (fsck: offer a function to demote fsck errors to warnings,
2015-06-22) it was only intended to be used to parse user-supplied
data.
For things that are purely internal to the C code it makes sense to
have the compiler check these arguments, and to skip the sanity
checking of the data in fsck_set_msg_type() which is redundant to
checks we get from the compiler.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the fsck_error callback to also pass along the
fsck_msg_id. Before this change the only way to get the message id was
to parse it back out of the "message".
Let's pass it down explicitly for the benefit of callers that might
want to use it, as discussed in [1].
Passing the msg_type is now redundant, as you can always get it back
from the msg_id, but I'm not changing that convention. It's really
common to need the msg_type, and the report() function itself (which
calls "fsck_error") needs to call fsck_msg_type() to discover
it. Let's not needlessly re-do that work in the user callback.
1. https://lore.kernel.org/git/87blcja2ha.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the FOREACH_FSCK_MSG_ID macro and the fsck_msg_id enum it helps
define from fsck.c to fsck.h. This is in preparation for having
non-static functions take the fsck_msg_id as an argument.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the FOREACH_MSG_ID macro to FOREACH_FSCK_MSG_ID in preparation
for moving it over to fsck.h. It's good convention to name macros
in *.h files in such a way as to clearly not clash with any other
names in other files.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In f417eed8cd (fsck: provide a function to parse fsck message IDs,
2015-06-22) the "STR" macro was introduced, but that short macro name
was not undefined after use as was done earlier in the same series for
the MSG_ID macro in c99ba492f1 (fsck: introduce identifiers for fsck
messages, 2015-06-22).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no reason to defer the calling of parse_msg_type() until after
we've checked if the "id < 0". This is not a hot codepath, and
parse_msg_type() itself may die on invalid input.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the values in the "enum fsck_msg_type" from being manually
assigned to using default C enum values.
This means we end up with a FSCK_IGNORE=0, which was previously
defined as "2".
I'm confident that nothing relies on these values, we always compare
them for equality. Let's not omit "0" so it won't be assumed that
we're using these as a boolean somewhere.
This also allows us to re-structure the fields to mark which are
"private" v.s. "public". See the preceding commit for a rationale for
not simply splitting these into two enums, namely that this is used
for both the private and public fsck API.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the FSCK_{FATAL,INFO,ERROR,WARN,IGNORE} defines into a new
fsck_msg_type enum.
These defines were originally introduced in:
- ba002f3b28 (builtin-fsck: move common object checking code to
fsck.c, 2008-02-25)
- f50c440730 (fsck: disallow demoting grave fsck errors to warnings,
2015-06-22)
- efaba7cc77 (fsck: optionally ignore specific fsck issues
completely, 2015-06-22)
- f27d05b170 (fsck: allow upgrading fsck warnings to errors,
2015-06-22)
The reason these were defined in two different places is because we
use FSCK_{IGNORE,INFO,FATAL} only in fsck.c, but FSCK_{ERROR,WARN} are
used by external callbacks.
Untangling that would take some more work, since we expose the new
"enum fsck_msg_type" to both. Similar to "enum object_type" it's not
worth structuring the API in such a way that only those who need
FSCK_{ERROR,WARN} pass around a different type.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor "if options->msg_type" and other code added in
0282f4dced (fsck: offer a function to demote fsck errors to warnings,
2015-06-22) to reduce the scope of the "int msg_type" variable.
This is in preparation for changing its type in a subsequent commit,
only using it in the "!options->msg_type" scope makes that change
This also brings the code in line with the fsck_set_msg_type()
function (also added in 0282f4dced), which does a similar check for
"!options->msg_type". Another minor benefit is getting rid of the
style violation of not having braces for the body of the "if".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the remaining variables of type fsck_msg_id from "id" to
"msg_id". This change is relatively small, and is worth the churn for
a later change where we have different id's in the "report" function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the append_msg_id() function in favor of calling
prepare_msg_ids(). We already have code to compute the camel-cased
msg_id strings in msg_id_info, let's use it.
When the append_msg_id() function was added in 71ab8fa840 (fsck:
report the ID of the error/warning, 2015-06-22) the prepare_msg_ids()
function didn't exist. When prepare_msg_ids() was added in
a46baac61e (fsck: factor out msg_id_info[] lazy initialization code,
2018-05-26) this code wasn't moved over to lazy initialization.
This changes the behavior of the code to initialize all the messages
instead of just camel-casing the one we need on the fly. Since the
common case is that we're printing just one message this is mostly
redundant work.
But that's OK in this case, reporting this fsck issue to the user
isn't performance-sensitive. If we were somehow doing so in a tight
loop (in a hopelessly broken repository?) this would help, since we'd
save ourselves from re-doing this work for identical messages, we
could just grab the prepared string from msg_id_info after the first
invocation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename variables in a function added in 0282f4dced (fsck: offer a
function to demote fsck errors to warnings, 2015-06-22).
It was needlessly confusing that it took a "msg_type" argument, but
then later declared another "msg_type" of a different type.
Let's rename that to "severity", and rename "id" to "msg_id" and
"msg_id" to "msg_id_str" etc. This will make a follow-up change
smaller.
While I'm at it properly indent the fsck_set_msg_type() argument list.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the fsck_walk_func to use an "enum object_type" instead of an
"int" type. The types are compatible, and ever since this was added in
355885d531 (add generic, type aware object chain walker, 2008-02-25)
we've used entries from object_type (OBJ_BLOB etc.).
So this doesn't really change anything as far as the generated code is
concerned, it just gives the compiler more information and makes this
easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the definitions of FSCK_OPTIONS_{DEFAULT,STRICT} to use
designated initializers. This allows us to omit those fields that
are initialized to 0 or NULL.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By mistake, the `.exe` extension is appended _twice_ when installing the
dashed executables into `libexec/git-core/` on Windows (the extension is
already appended when adding items to the `git_links` list in the
`#Creating hardlinks` section).
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like the Makefile-based build learned to skip hard-linking the
dashed built-ins in 179227d6e2 (Optionally skip linking/copying the
built-ins, 2020-09-21), this patch teaches the CMake-based build the
same trick.
Note: In contrast to the Makefile-based process, the built-ins would
only be linked during installation, not already when Git is built.
Therefore, the CMake-based build that we use in our CI builds _already_
does not link those built-ins (because the files are not installed
anywhere, they are used to run the test suite in-place).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whenever we fix critical vulnerabilities, we follow some sort of
protocol (e.g. setting a coordinated release date, keeping the fix under
embargo until that time, coordinating with packagers and/or hosting
sites, etc).
Similar in spirit to `Documentation/howto/maintain-git.txt`, let's
formalize the details in a document.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the same document, describe that Git does not have Long Term Support
(LTS) release trains, although security fixes are always applied to a
few of the most recent release trains.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When sanitizing client-supplied strings on Windows, also strip off
backslashes, not just slashes.
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git commit --fixup=<commit>", which was to tweak the changes made
to the contents while keeping the original log message intact,
learned "--fixup=(amend|reword):<commit>", that can be used to
tweak both the message and the contents, and only the message,
respectively.
* cm/rebase-i-fixup-amend-reword:
doc/git-commit: add documentation for fixup=[amend|reword] options
t3437: use --fixup with options to create amend! commit
t7500: add tests for --fixup=[amend|reword] options
commit: add a reword suboption to --fixup
commit: add amend suboption to --fixup to create amend! commit
sequencer: export and rename subject_length()
Follow-up fixes to "cm/rebase-i" topic.
* cm/rebase-i-updates:
doc/rebase -i: fix typo in the documentation of 'fixup' command
t/t3437: fixup the test 'multiple fixup -c opens editor once'
t/t3437: use named commits in the tests
t/t3437: simplify and document the test helpers
t/t3437: check the author date of fixed up commit
t/t3437: remove the dependency of 'expected-message' file from tests
t/t3437: fixup here-docs in the 'setup' test
t/lib-rebase: update the documentation of FAKE_LINES
rebase -i: clarify and fix 'fixup -c' rebase-todo help
sequencer: rename a few functions
sequencer: fixup the datatype of the 'flag' argument
"rebase -i" is getting cleaned up and also enhanced.
* cm/rebase-i:
doc/git-rebase: add documentation for fixup [-C|-c] options
rebase -i: teach --autosquash to work with amend!
t3437: test script for fixup [-C|-c] options in interactive rebase
rebase -i: add fixup [-C | -c] command
sequencer: use const variable for commit message comments
sequencer: pass todo_item to do_pick_commit()
rebase -i: comment out squash!/fixup! subjects from squash message
sequencer: factor out code to append squash message
rebase -i: only write fixup-message when it's needed
The http codepath learned to let the credential layer to cache the
password used to unlock a certificate that has successfully been
used.
* js/http-pki-credential-store:
http: drop the check for an empty proxy password before approving
http: store credential when PKI auth is used
Reorganize Makefile to allow building git.o and other essential
objects without extra stuff needed only for testing.
* ab/make-cleanup:
Makefile: add {program,xdiff,test,git,fuzz}-objs & objects targets
Makefile: split OBJECTS into OBJECTS and GIT_OBJS
Makefile: sort OBJECTS assignment for subsequent change
Makefile: split up long OBJECTS line
Makefile: guard against TEST_OBJS in the environment
The hashwrite() method takes an input buffer and updates a hashfile's
hash function while writing the data to a file. To avoid overuse of
flushes, the hashfile has an internal buffer and most writes will use
memcpy() to transfer data from the input 'buf' to the hashfile's buffer
of size 8 * 1024 bytes.
Logic introduced by a8032d12 (sha1write: don't copy full sized buffers,
2008-09-02) reduces the number of memcpy() calls when the input buffer
is sufficiently longer than the hashfile's buffer, causing nr to be the
length of the full buffer. In these cases, the input buffer is used
directly in chunks equal to the hashfile's buffer size.
This method caught my attention while investigating some performance
issues, but it turns out that these performance issues were noise within
the variance of the experiment.
However, during this investigation, I inspected hashwrite() and
misunderstood it, even after looking closely and trying to make it
faster. This change simply reorganizes some parts of the loop within
hashwrite() to make it clear that each batch either uses memcpy() to the
hashfile's buffer or writes directly from the input buffer. The previous
code relied on indirection through local variables and essentially
inlined the implementation of hashflush() to reduce lines of code.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff-index" codepath has been taught to trust fsmonitor status
to reduce number of lstat() calls.
* nk/diff-index-fsmonitor:
fsmonitor: add perf test for git diff HEAD
fsmonitor: add assertion that fsmonitor is valid to check_removed
fsmonitor: skip lstat deletion check during git diff-index
GIT_TEST_FAIL_PREREQS is a mechanism to skip test pieces with
prerequisites to catch broken tests that depend on the side effects
of optional pieces, but did not work at all when negative
prerequisites were involved.
* jk/fail-prereq-testfix:
t: annotate !PTHREADS tests with !FAIL_PREREQS
"git repack" so far has been only capable of repacking everything
under the sun into a single pack (or split by size). A cleverer
strategy to reduce the cost of repacking a repository has been
introduced.
* tb/geometric-repack:
builtin/pack-objects.c: ignore missing links with --stdin-packs
builtin/repack.c: reword comment around pack-objects flags
builtin/repack.c: be more conservative with unsigned overflows
builtin/repack.c: assign pack split later
t7703: test --geometric repack with loose objects
builtin/repack.c: do not repack single packs with --geometric
builtin/repack.c: add '--geometric' option
packfile: add kept-pack cache for find_kept_pack_entry()
builtin/pack-objects.c: rewrite honor-pack-keep logic
p5303: measure time to repack with keep
p5303: add missing &&-chains
builtin/pack-objects.c: add '--stdin-packs' option
revision: learn '--no-kept-objects'
packfile: introduce 'find_kept_pack_entry()'
As record_reused_object(offset, offset - hashfile_total(out)) said,
reused_chunk.difference should be the offset of original packfile minus
the offset of the generated packfile. But the comment presented an opposite way.
Signed-off-by: Han Xin <hanxin.hx@alibaba-inc.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The text says something called a "patch" is prepared one for each
commit, it is suitable for e-mail submission, and "am" is the
command to use it, but does not say what the "patch" really is.
The description in the page also refers to the "three-dash" line,
but it is unclear what it is, unless the reader is given a more
detailed overview of what the "patch" is.
Add a brief paragraph to give an overview of what the output looks
like.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The completion for 'git stash' has not changed in a major way since it
was converted from shell script to builtin. Now that it's a builtin, we
can take advantage of the groundwork laid out by parse-options and use
the generated options.
Rewrite _git_stash() to take use __gitcomp_builtin() to generate
completions for subcommands.
The main `git stash` command does not take any arguments directly. If no
subcommand is given, it automatically defaults to `git stash push`. This
means that we can simplify the logic for when no subcommands have been
given yet. We only have to offer subcommand completions when we're
completing a non-option after "stash".
One area that this patch could improve upon is that the `git stash list`
command accepts log-options. It would be nice if the completion for this
were unified with that of _git_log() and _git_show() which would allow
completions to be provided for options such as `--pretty` but that is
outside the scope of this patch.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To save a level of indentation, perform an early return in the "if" arm
so we can move the "else" code out of the block.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many completion functions perform hardcoded comparisons with $cword.
This fails in the case where the main git command is given arguments
(e.g. `git -C . bundle<TAB>` would fail to complete its subcommands).
Even _git_worktree(), which uses __git_find_on_cmdline(), could still
fail. With something like `git -C add worktree move<TAB>`, the
subcommand would be incorrectly identified as "add" instead of "move".
Assign $__git_subcommand_idx in __git_main(), where the git subcommand
is actually found and the corresponding completion function is called.
Use this variable to replace hardcoded comparisons with $cword.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a stray "xb" I inadvertently introduced in 780aa0a21e (tests:
remove last uses of GIT_TEST_GETTEXT_POISON=false, 2021-02-11).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get-send-email currently makes the assumption that the
'sendemail-validate' hook exists inside of the repository.
Since the introduction of 'core.hooksPath' configuration option in
867ad08a26 (hooks: allow customizing where the hook directory is,
2016-05-04), this is no longer true.
Instead of assuming a hardcoded repo relative path, query
git for the actual path of the hooks directory.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the rebase.useBuiltin setting and the now-obsolete
GIT_TEST_REBASE_USE_BUILTIN test flag.
This was left in place after my d03ebd411c (rebase: remove the
rebase.useBuiltin setting, 2019-03-18) to help anyone who'd used the
experimental flag and wanted to know that it was the default, or that
they should transition their test environment to use the builtin
rebase unconditionally.
It's been more than long enough for those users to get a headsup about
this. So remove all the scaffolding that was left inplace after
d03ebd411c. I'm also removing the documentation entry, if anyone
still has this left in their configuration they can do some source
archaeology to figure out what it used to do, which makes more sense
than exposing every git user reading the documentation to this legacy
configuration switch.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `-v<n>` option of `format-patch` can give nothing but an
integral iteration number to patches in a series. Some people,
however, prefer to mark a new iteration with only a small fixup
with a non integral iteration number (e.g. an "oops, that was
wrong" fix-up patch for v4 iteration may be labeled as "v4.1").
Allow `format-patch` to take such a non-integral iteration
number.
`<n>` can be any string, such as '3.1' or '4rev2'. In the case
where it is a non-integral value, the "Range-diff" and "Interdiff"
headers will not include the previous version.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parallel checkout machinery will call checkout_entry() for entries
that could not be written in parallel due to path collisions. At this
point, we will already be holding the conversion attributes for each
entry, and it would be wasteful to let checkout_entry() load these
again. Instead, let's add the checkout_entry_ca() variant, which
optionally takes a preloaded conv_attrs struct.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a following patch, checkout_entry() will use conv_attrs to decide
whether an entry should be enqueued for parallel checkout or not. But
the attributes lookup only happens lower in this call stack. To avoid
the unnecessary work of loading the attributes twice, let's move it up
to checkout_entry(), and pass the loaded struct down to write_entry().
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code that updates the in-memory index information after an entry is
written currently resides in write_entry(). Extract it to a public
function so that it can be called by the parallel checkout functions,
outside entry.c, in a later patch.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two functions will be used by the parallel checkout code, so let's
make them public. Note: fstat_output() is renamed to
fstat_checkout_output(), now that it has become public, seeking to avoid
future name collisions.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The declarations of entry.c's public functions and structures currently
reside in cache.h. Although not many, they contribute to the size of
cache.h and, when changed, cause the unnecessary recompilation of
modules that don't really use these functions. So let's move them to a
new entry.h header. While at it let's also move a comment related to
checkout_entry() from entry.c to entry.h as it's more useful to describe
the function there.
Original-patch-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Historically, Git has supported the 'Signed-off-by' commit trailer
using the '--signoff' and the '-s' option from the command line.
But users may need to provide other trailer information from the
command line such as "Helped-by", "Reported-by", "Mentored-by",
Now implement a new `--trailer <token>[(=|:)<value>]` option to pass
other trailers to `interpret-trailers` and insert them into commit
messages.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git -c core.bare=false clone --bare ..." would have segfaulted,
which has been corrected.
* bc/clone-bare-with-conflicting-config:
builtin/init-db: handle bare clones when core.bare set to false
"git log --format='...'" learned "%(describe)" placeholder.
* rs/pretty-describe:
archive: expand only a single %(describe) per archive
pretty: document multiple %(describe) being inconsistent
t4205: assert %(describe) test coverage
pretty: add merge and exclude options to %(describe)
pretty: add %(describe)
"git stash show" learned to optionally show untracked part of the
stash.
* dl/stash-show-untracked:
stash show: learn stash.showIncludeUntracked
stash show: teach --include-untracked and --only-untracked
Rename detection rework continues.
* en/ort-perf-batch-8:
diffcore-rename: compute dir_rename_guess from dir_rename_counts
diffcore-rename: limit dir_rename_counts computation to relevant dirs
diffcore-rename: compute dir_rename_counts in stages
diffcore-rename: extend cleanup_dir_rename_info()
diffcore-rename: move dir_rename_counts into dir_rename_info struct
diffcore-rename: add function for clearing dir_rename_count
Move computation of dir_rename_count from merge-ort to diffcore-rename
diffcore-rename: add a mapping of destination names to their indices
diffcore-rename: provide basic implementation of idx_possible_rename()
diffcore-rename: use directory rename guided basename comparisons
Updates to memory allocation code around the use of pcre2 library.
* ab/grep-pcre2-allocfix:
grep/pcre2: move definitions of pcre2_{malloc,free}
grep/pcre2: move back to thread-only PCREv2 structures
grep/pcre2: actually make pcre2 use custom allocator
grep/pcre2: use pcre2_maketables_free() function
grep/pcre2: use compile-time PCREv2 version test
grep/pcre2: add GREP_PCRE2_DEBUG_MALLOC debug mode
grep/pcre2: prepare to add debugging to pcre2_malloc()
grep/pcre2: correct reference to grep_init() in comment
grep/pcre2: drop needless assignment to NULL
grep/pcre2: drop needless assignment + assert() on opt->pcre2
Perf test update to work better in secondary worktrees.
* jk/perf-in-worktrees:
t/perf: avoid copying worktree files from test repo
t/perf: handle worktrees as test repos
A new configuration variable has been introduced to allow choosing
which version of the generation number gets used in the
commit-graph file.
* ds/commit-graph-generation-config:
commit-graph: use config to specify generation type
commit-graph: create local repository pointer
Update C code that sets a few configuration variables when a remote
is configured so that it spells configuration variable names in the
canonical camelCase.
* ab/remote-write-config-in-camel-case:
remote: write camel-cased *.pushRemote on rename
remote: add camel-cased *.tagOpt key, like clone
We had a code to diagnose and die cleanly when a required
clean/smudge filter is missing, but an assert before that
unnecessarily fired, hiding the end-user facing die() message.
* mt/cleanly-die-upon-missing-required-filter:
convert: fail gracefully upon missing clean cmd on required filter
It does not make sense to make ".gitattributes", ".gitignore" and
".mailmap" symlinks, as they are supposed to be usable from the
object store (think: bare repositories where HEAD:.mailmap etc. are
used). When these files are symbolic links, we used to read the
contents of the files pointed by them by mistake, which has been
corrected.
* jk/open-dotgitx-with-nofollow:
mailmap: do not respect symlinks for in-tree .mailmap
exclude: do not respect symlinks for in-tree .gitignore
attr: do not respect symlinks for in-tree .gitattributes
exclude: add flags parameter to add_patterns()
attr: convert "macro_ok" into a flags field
add open_nofollow() helper
When "git diff --no-index X Y" is run the modes of the files being
differ are normalized by canon_mode() in fill_filespec().
I recently broke that behavior in a patch of mine[1] which would pass
all tests, or not, depending on the umask of the git.git checkout.
Let's test for this explicitly. Arguably this should not be the
behavior of "git diff --no-index". We aren't diffing our own objects
or the index, so it might be useful to show mode differences between
files.
On the other hand diff(1) does not do that, and it would be needlessly
distracting when e.g. diffing an extracted tar archive whose contents
is the same, but whose file modes are different.
1. https://lore.kernel.org/git/20210316155829.31242-2-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When preparing the bitmap walk, we first establish the set of of have
and want objects by iterating over the set of pending objects: if an
object is marked as uninteresting, it's declared as an object we already
have, otherwise as an object we want. These two sets are then used to
compute which transitively referenced objects we need to obtain.
One special case here are tag objects: when a tag is requested, we
resolve it to its first not-tag object and add both resolved objects as
well as the tag itself into either the have or want set. Given that the
uninteresting-property always propagates to referenced objects, it is
clear that if the tag is uninteresting, so are its children and vice
versa. But we fail to propagate the flag, which effectively means that
referenced objects will always be interesting except for the case where
they have already been marked as uninteresting explicitly.
This mislabeling does not impact correctness: we now have it in our
"wants" set, and given that we later do an `AND NOT` of the bitmaps of
"wants" and "haves" sets it is clear that the result must be the same.
But we now start to needlessly traverse the tag's referenced objects in
case it is uninteresting, even though we know that each referenced
object will be uninteresting anyway. In the worst case, this can lead to
a complete graph walk just to establish that we do not care for any
object.
Fix the issue by propagating the `UNINTERESTING` flag to pointees of tag
objects and add a benchmark with negative revisions to p5310. This shows
some nice performance benefits, tested with linux.git:
Test HEAD~ HEAD
---------------------------------------------------------------------------------------------------------------
5310.3: repack to disk 193.18(181.46+16.42) 194.61(183.41+15.83) +0.7%
5310.4: simulated clone 25.93(24.88+1.05) 25.81(24.73+1.08) -0.5%
5310.5: simulated fetch 2.64(5.30+0.69) 2.59(5.16+0.65) -1.9%
5310.6: pack to file (bitmap) 58.75(57.56+6.30) 58.29(57.61+5.73) -0.8%
5310.7: rev-list (commits) 1.45(1.18+0.26) 1.46(1.22+0.24) +0.7%
5310.8: rev-list (objects) 15.35(14.22+1.13) 15.30(14.23+1.07) -0.3%
5310.9: rev-list with tag negated via --not --all (objects) 22.49(20.93+1.56) 0.11(0.09+0.01) -99.5%
5310.10: rev-list with negative tag (objects) 0.61(0.44+0.16) 0.51(0.35+0.16) -16.4%
5310.11: rev-list count with blob:none 12.15(11.19+0.96) 12.18(11.19+0.99) +0.2%
5310.12: rev-list count with blob:limit=1k 17.77(15.71+2.06) 17.75(15.63+2.12) -0.1%
5310.13: rev-list count with tree:0 1.69(1.31+0.38) 1.68(1.28+0.39) -0.6%
5310.14: simulated partial clone 20.14(19.15+0.98) 19.98(18.93+1.05) -0.8%
5310.16: clone (partial bitmap) 12.78(13.89+1.07) 12.72(13.99+1.01) -0.5%
5310.17: pack to file (partial bitmap) 42.07(45.44+2.72) 41.44(44.66+2.80) -1.5%
5310.18: rev-list with tree filter (partial bitmap) 0.44(0.29+0.15) 0.46(0.32+0.14) +4.5%
While most benchmarks are probably in the range of noise, the newly
added 5310.9 and 5310.10 benchmarks consistenly perform better.
Signed-off-by: Patrick Steinhardt <ps@pks.im>.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the username and password are supplied in a url like this
https://myuser:secret@git.exampe/myrepo.git and the server supports the
negotiate authenticaten method, git does not fall back to basic auth and
libcurl hardly tries to authenticate with the negotiate method.
Stop using the Negotiate authentication method after the first failure
because if it fails on the first try it will never succeed.
Signed-off-by: Christopher Schenk <christopher@cschenk.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create t0052-simple-ipc.sh with unit tests for the "simple-ipc" mechanism.
Create t/helper/test-simple-ipc test tool to exercise the "simple-ipc"
functions.
When the tool is invoked with "run-daemon", it runs a server to listen
for "simple-ipc" connections on a test socket or named pipe and
responds to a set of commands to exercise/stress the communication
setup.
When the tool is invoked with "start-daemon", it spawns a "run-daemon"
command in the background and waits for the server to become ready
before exiting. (This helps make unit tests in t0052 more predictable
and avoids the need for arbitrary sleeps in the test script.)
The tool also has a series of client "send" commands to send commands
and data to a server instance.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create Unix domain socket based implementation of "simple-ipc".
A set of `ipc_client` routines implement a client library to connect
to an `ipc_server` over a Unix domain socket, send a simple request,
and receive a single response. Clients use blocking IO on the socket.
A set of `ipc_server` routines implement a thread pool to listen for
and concurrently service client connections.
The server creates a new Unix domain socket at a known location. If a
socket already exists with that name, the server tries to determine if
another server is already listening on the socket or if the socket is
dead. If socket is busy, the server exits with an error rather than
stealing the socket. If the socket is dead, the server creates a new
one and starts up.
If while running, the server detects that its socket has been stolen
by another server, it automatically exits.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test for --exit-code working with --no-index. There's no reason
to suppose it wouldn't, but we weren't testing for it anywhere in our
tests. Let's fix that blind spot.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
transport_get_remote_refs() can populate the transport struct's
remote_refs. transport_disconnect() is already responsible for most of
transport's cleanup - therefore we also take care of freeing remote_refs
there.
There are 2 locations where transport_disconnect() is called before
we're done using the returned remote_refs. This patch changes those
callsites to only call transport_disconnect() after the returned refs
are no longer being used - which is necessary to safely be able to
free remote_refs during transport_disconnect().
This commit fixes the following leak which was found while running
t0000, but is expected to also fix the same pattern of leak in all
locations that use transport_get_remote_refs():
Direct leak of 165 byte(s) in 1 object(s) allocated from:
#0 0x49a6b2 in calloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0x9a72f2 in xcalloc /home/ahunt/oss-fuzz/git/wrapper.c:140:8
#2 0x8ce203 in alloc_ref_with_prefix /home/ahunt/oss-fuzz/git/remote.c:867:20
#3 0x8ce1a2 in alloc_ref /home/ahunt/oss-fuzz/git/remote.c:875:9
#4 0x72f63e in process_ref_v2 /home/ahunt/oss-fuzz/git/connect.c:426:8
#5 0x72f21a in get_remote_refs /home/ahunt/oss-fuzz/git/connect.c:525:8
#6 0x979ab7 in handshake /home/ahunt/oss-fuzz/git/transport.c:305:4
#7 0x97872d in get_refs_via_connect /home/ahunt/oss-fuzz/git/transport.c:339:9
#8 0x9774b5 in transport_get_remote_refs /home/ahunt/oss-fuzz/git/transport.c:1388:4
#9 0x51cf80 in cmd_clone /home/ahunt/oss-fuzz/git/builtin/clone.c:1271:9
#10 0x4cd60d in run_builtin /home/ahunt/oss-fuzz/git/git.c:453:11
#11 0x4cb2da in handle_builtin /home/ahunt/oss-fuzz/git/git.c:704:3
#12 0x4ccc37 in run_argv /home/ahunt/oss-fuzz/git/git.c:771:4
#13 0x4cac29 in cmd_main /home/ahunt/oss-fuzz/git/git.c:902:19
#14 0x69c45e in main /home/ahunt/oss-fuzz/git/common-main.c:52:11
#15 0x7f6a459d5349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
preprocess_options() allocates new strings for help messages for
OPTION_ALIAS. Therefore we also need to clean those help messages up
when freeing the returned options.
First introduced in:
7c280589cf (parse-options: teach "git cmd -h" to show alias as alias, 2020-03-16)
The preprocessed options themselves no longer contain any indication
that a given option is/was an alias - therefore we add a new flag to
indicate former aliases. (An alternative approach would be to look back
at the original options to determine which options are aliases - but
that seems like a fragile approach. Or we could even look at the
alias_groups list - which might be less fragile, but would be slower
as it requires nested looping.)
As far as I can tell, parse_options() is only ever used once per
command, and the help messages are small - hence this leak has very
little impact.
This leak was found while running t0001. LSAN output can be found below:
Direct leak of 65 byte(s) in 1 object(s) allocated from:
#0 0x49a859 in realloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x9aae36 in xrealloc /home/ahunt/oss-fuzz/git/wrapper.c:126:8
#2 0x939d8d in strbuf_grow /home/ahunt/oss-fuzz/git/strbuf.c:98:2
#3 0x93b936 in strbuf_vaddf /home/ahunt/oss-fuzz/git/strbuf.c:392:3
#4 0x93b7ff in strbuf_addf /home/ahunt/oss-fuzz/git/strbuf.c:333:2
#5 0x86747e in preprocess_options /home/ahunt/oss-fuzz/git/parse-options.c:666:3
#6 0x866ed2 in parse_options /home/ahunt/oss-fuzz/git/parse-options.c:847:17
#7 0x51c4a7 in cmd_clone /home/ahunt/oss-fuzz/git/builtin/clone.c:989:9
#8 0x4cd60d in run_builtin /home/ahunt/oss-fuzz/git/git.c:453:11
#9 0x4cb2da in handle_builtin /home/ahunt/oss-fuzz/git/git.c:704:3
#10 0x4ccc37 in run_argv /home/ahunt/oss-fuzz/git/git.c:771:4
#11 0x4cac29 in cmd_main /home/ahunt/oss-fuzz/git/git.c:902:19
#12 0x69c9fe in main /home/ahunt/oss-fuzz/git/common-main.c:52:11
#13 0x7fdac42d4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because it's easier to read, but also likely to be easier to maintain.
I am making this change because I need to add a new flag in a later
commit.
Also add a trailing comma to the last enum entry to simplify addition of
new flags.
This change was originally suggested by Peff in:
https://public-inbox.org/git/YEZ%2FBWWbpfVwl6nO@coredump.intra.peff.net/
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the signature of read_tree_recursive() to omit the "base",
"baselen" and "stage" arguments. No callers of it use these parameters
for anything anymore.
The last function to call read_tree_recursive() with a non-"" path was
read_tree_recursive() itself, but that was changed in
ffd31f661d (Reimplement read_tree_recursive() using
tree_entry_interesting(), 2011-03-25).
The last user of the "stage" parameter went away in the last commit,
and even that use was mere boilerplate.
So let's remove those and rename the read_tree_recursive() function to
just read_tree(). We had another read_tree() function that I've
refactored away in preceding commits, since all in-tree users read
trees recursively with a callback we can change the name to signify
that this is the norm.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the static read_tree_1() function to read_tree_at(). This
function works just like read_tree_recursive(), except you provide
your own strbuf.
This step doesn't make much sense now, but in follow-up commits I'll
remove the base/baselen/stage arguments to read_tree_recursive(). At
that point an anticipated in-tree user[1] for the old
read_tree_recursive() couldn't provide a path to start the
traversal.
Let's give them a function to do so with an API that makes more sense
for them, by taking a strbuf we should be able to avoid more casting
and/or reallocations in the future.
1. https://lore.kernel.org/git/xmqqft106sok.fsf@gitster.g
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "stage" variable being passed around in the archive code has only
ever been an elaborate way to hardcode the value "0".
This code was added in its original form in e4fbbfe9ec (Add
git-zip-tree, 2006-08-26), at which point a hardcoded "0" would be
passed down through read_tree_recursive() to write_zip_entry().
It was then diligently added to the "struct directory" in
ed22b4173b (archive: support filtering paths with glob, 2014-09-21),
but we were still not doing anything except passing it around as-is.
Let's stop doing that in the code internal to archive.c, we'll still
feed "0" to read_tree_recursive() itself, but won't use it. That we're
providing it at all to read_tree_recursive() will be changed in a
follow-up commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor away the read_tree() function into its only user,
overlay_tree_on_index().
First, change read_one_entry_opt() to use the strbuf parameter
read_tree_recursive() passes down in place. This finishes up a partial
refactoring started in 6a0b0b6de9 (tree.c: update read_tree_recursive
callback to pass strbuf as base, 2014-11-30).
Moving the rest into overlay_tree_on_index() makes this index juggling
we're doing easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that read_tree() has been moved to ls-files.c we can get rid of
the stage != 1 case that'll never happen.
Let's not use read_tree_recursive() as a pass-through to pass "stage =
1" either. For now we'll pass an unused "stage = 0" for consistency
with other read_tree_recursive() callers, that argument will be
removed in a follow-up commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the read_tree() API was added around the same time as
read_tree_recursive() in 94537c78a8 (Move "read_tree()" to
"tree.c"[...], 2005-04-22) and b12ec373b8 ([PATCH] Teach read-tree
about commit objects, 2005-04-20) things have gradually migrated over
to the read_tree_recursive() version.
Now builtin/ls-files.c is the last user of this code, let's move all
the relevant code there. This allows for subsequent simplification of
it, and an eventual move to read_tree_recursive().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for "ls-files --with-tree". There was effectively no
coverage for any normal usage of this command, only the tests added in
54e1abce90 (Add test case for ls-files --with-tree, 2007-10-03) for
an obscure bug.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing tests for showing a tree with "git show". Let's test for
showing a tree, two trees, and that doing so doesn't recurse.
The only tests for this code added in 5d7eeee2ac (git-show: grok
blobs, trees and tags, too, 2006-12-14) were the tests in
t7701-repack-unpack-unreachable.sh added in ccc1297226 (repack:
modify behavior of -A option to leave unreferenced objects unpacked,
2008-05-09).
Let's add this common mode of operation to the "show" tests
themselves. It's more obvious, and the tests in
t7701-repack-unpack-unreachable.sh happily pass if we start buggily
emitting trees recursively.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for switching from merge-recursive to merge-ort as the
default strategy, have the testsuite default to running with merge-ort.
Keep coverage of the recursive backend by having the linux-gcc job run
with it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we started on merge-ort, thousands of tests failed when run with
the GIT_TEST_MERGE_ALGORITHM=ort flag; with so many, it didn't make
sense to flip all their test expectations. The ones in t6409, t6418,
and the submodule tests are being handled by an independent in-flight
topic ("Complete merge-ort implemenation...almost"). The ones in
t6423 were left out of the other series because other ongoing series
that this commit depends upon were addressing those. Now that we only
have one remaining test failure in t6423, let's mark it as such.
This remaining test will be fixed by a future optimization series, but
since merge-recursive doesn't pass this test either, passing it is not
necessary for declaring merge-ort ready for general use.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 5ced7c3da0, which was
put in place as a temporary measure to avoid optimizations unstably
erroring out on no destination having a majority of the necessary
renames for directories that had no new files and thus no need for
directory rename detection anyway. Now that optimizations are in place
to prevent us from trying to compute directory rename count computations
for directories that do not need it, we can undo this temporary measure.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plan is to just delete merge-recursive, but not until everyone is
comfortable with merge-ort as a replacement. Given that I haven't
switched all callers of merge-recursive over yet (e.g. git-am still uses
merge-recursive), maybe there's some value documenting known bugs in the
algorithm in case we end up keeping it or someone wants to dig it up in
the future.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a variety of questions users might ask while resolving
conflicts:
* What changes have been made since the previous (first) parent?
* What changes are staged?
* What is still unstaged? (or what is still conflicted?)
* What changes did I make to resolve conflicts so far?
The first three of these have simple answers:
* git diff HEAD
* git diff --cached
* git diff
There was no way to answer the final question previously. Adding one
is trivial in merge-ort, since it works by creating a tree representing
what should be written to the working copy complete with conflict
markers. Simply write that tree to .git/AUTO_MERGE, allowing users to
answer the fourth question with
* git diff AUTO_MERGE
I avoided using a name like "MERGE_AUTO", because that would be
merge-specific (much like MERGE_HEAD, REBASE_HEAD, REVERT_HEAD,
CHERRY_PICK_HEAD) and I wanted a name that didn't change depending on
which type of operation the merge was part of.
Ensure that paths which clean out other temporary operation-specific
files (e.g. CHERRY_PICK_HEAD, MERGE_MSG, rebase-merge/ state directory)
also clean out this AUTO_MERGE file.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-ort handles submodules (and directory/file conflicts in general)
differently than merge-recursive does; it basically puts all the special
handling for different filetypes into one place in the codebase instead
of needing special handling for different filetypes in many different
code paths. This one code path in merge-ort could perhaps use some work
still (there are still test_expect_failure cases in the testsuite), but
it passes all the tests that merge-recursive does as well as 12
additional ones that merge-recursive fails. Mark those 12 tests as
test_expect_success under merge-ort.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When merge conflicts occur in paths removed by a sparse-checkout, we
need to unsparsify those paths (clear the SKIP_WORKTREE bit), and write
out the conflicted file to the working copy. In the very unlikely case
that someone manually put a file into the working copy at the location
of the SKIP_WORKTREE file, we need to avoid overwriting whatever edits
they have made and move that file to a different location first.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is a conflict during a merge for a SKIP_WORKTREE entry, we
expect that file to be written to the working copy and have the
SKIP_WORKTREE bit cleared in the index. If the user had manually
created a file in the working tree despite SKIP_WORKTREE being set, we
do not want to clobber their changes to that file, but want to move it
out of the way. Add tests that check for these behaviors.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-recursive has some simple code to support subtree shifting; copy
it over to merge-ort. This fixes t6409.12 under
GIT_TEST_MERGE_ALGORITHM=ort.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have a modify/delete conflict, but the only change to the
modification is e.g. change of line endings, then if renormalization is
requested then we should be able to recognize such a case as a
not-modified/delete and resolve the conflict automatically.
This fixes t6418.10 under GIT_TEST_MERGE_ALGORITHM=ort.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ll_merge() needs an index when renormalization is requested. Create one
specifically for just this purpose with just the one needed entry. This
fixes t6418.4 and t6418.5 under GIT_TEST_MERGE_ALGORITHM=ort.
NOTE 1: Even if the user has a working copy or a real index (which is
not a given as merge-ort can be used in bare repositories), we
explicitly ignore any .gitattributes file from either of these
locations. merge-ort can be used to merge two branches that are
unrelated to HEAD, so .gitattributes from the working copy and current
index should not be considered relevant.
NOTE 2: Since we are in the middle of merging, there is a risk that
.gitattributes itself is conflicted...leaving us with an ill-defined
situation about how to perform the rest of the merge. It could be that
the .gitattributes file does not even exist on one of the sides of the
merge, or that it has been modified on both sides. If it's been
modified on both sides, it's possible that it could itself be merged
cleanly, though it's also possible that it only merges cleanly if you
use the right version of the .gitattributes file to drive the merge. It
gets kind of complicated. The only test we ever had that attempted to
test behavior in this area was seemingly unaware of the undefined
behavior, but knew the test wouldn't work for lack of attribute handling
support, marked it as test_expect_failure from the beginning, but
managed to fail for several reasons unrelated to attribute handling.
See commit 6f6e7cfb52 ("t6038: remove problematic test", 2020-08-03) for
details. So there are probably various ways to improve what
initialize_attr_index() picks in the case of a conflicted .gitattributes
but for now I just implemented something simple -- look for whatever
.gitattributes file we can find in any of the higher order stages and
use it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
renormalize_buffer() requires an index_state, which is something that
merge-ort does not operate with. However, all the renormalization code
needs is an index with a .gitattributes file...plus a little bit of
setup. Create such an index, along with the deallocation and
attr_direction handling.
A subsequent commit will add a function to finish the initialization
of this index.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rename/rename conflict handling depends on the fact that if both sides
renamed the same path, that the one on the MERGE_SIDE1 will appear first
in the combined diff_queue_struct passed to process_renames(). Since we
add all pairs from MERGE_SIDE1 to combined first, and then all pairs
from MERGE_SIDE2, and then sort based on filename, this will only be
true if the sort used is stable. This was found due to the fact that
Mac, unlike Linux, apparently has a system-defined qsort that is not
stable.
While we are at it, review the other callers of QSORT and add comments
about why they can remain as calls to QSORT instead of being modified
to call STABLE_QSORT.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a corner case bug in "git mv" on case insensitive systems,
which was introduced in 2.29 timeframe.
* tb/git-mv-icase-fix:
git mv foo FOO ; git mv foo bar gave an assert
CALLOC_ARRAY() macro replaces many uses of xcalloc().
* rs/calloc-array:
cocci: allow xcalloc(1, size)
use CALLOC_ARRAY
git-compat-util.h: drop trailing semicolon from macro definition
Fix macros that can silently inject unintended null-statements.
* rs/avoid-null-statement-after-macro-call:
mem-pool: drop trailing semicolon from macro definition
block-sha1: drop trailing semicolon from macro definition
The data structure used by fsmonitor interface was not properly
duplicated during an in-core merge, leading to use-after-free etc.
* js/fsmonitor-unpack-fix:
fsmonitor: do not forget to release the token in `discard_index()`
fsmonitor: fix memory corruption in some corner cases
"git bisect" reimplemented more in C during 2.30 timeframe did not
take an annotated tag as a good/bad endpoint well. This regression
has been corrected.
* jk/bisect-peel-tag-fix:
bisect: peel annotated tags to commits
The fsmonitor interface read from its input without making sure
there is something to read from. This bug is new in 2.31
timeframe.
* jh/fsmonitor-prework:
fsmonitor: avoid global-buffer-overflow READ when checking trivial response
When 'git pack-objects --stdin-packs' encounters a commit in a pack, it
marks it as a starting point of a best-effort reachability traversal
that is used to populate the name-hash of the objects listed in the
given packs.
The traversal expects that it should be able to walk the ancestors of
all commits in a pack without issue. Ordinarily this is the case, but it
is possible to having missing parents from an unreachable part of the
repository. In that case, we'd consider any missing objects in the
unreachable portion of the graph to be junk.
This should be handled gracefully: since the traversal is best-effort
(i.e., we don't strictly need to fill in all of the name-hash fields),
we should simply ignore any missing links.
This patch does that (by setting the 'ignore_missing_links' bit on the
rev_info struct), and ensures we don't regress in the future by adding a
test which demonstrates this case.
It is a little over-eager, since it will also ignore missing links in
reachable parts of the packs (which would indicate a corrupted
repository), but '--stdin-packs' is explicitly *not* about reachability.
So this step isn't making anything worse for a repository which contains
packs missing reachable objects (since we never drop objects with
'--stdin-packs').
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note on using Asciidoctor to build documentation suite.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted a few commits ago ("diffcore-rename: only compute
dir_rename_count for relevant directories"), when a source file rename
is used as part of directory rename detection, we need to increment
counts for each ancestor directory in dirs_removed with value
RELEVANT_FOR_SELF. However, a few commits ago ("diffcore-rename: check
if we have enough renames for directories early on"), we may have
downgraded all relevant ancestor directories from RELEVANT_FOR_SELF to
RELEVANT_FOR_ANCESTOR.
For a given file, if no ancestor directory is found in dirs_removed with
a value of RELEVANT_FOR_SELF, then we can downgrade
relevant_source[PATH] from RELEVANT_LOCATION to RELEVANT_NO_MORE. This
means we can skip detecting a rename for that particular path (and any
other paths in the same directory).
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 5.680 s ± 0.096 s 5.665 s ± 0.129 s
mega-renames: 13.812 s ± 0.162 s 11.435 s ± 0.158 s
just-one-mega: 506.0 ms ± 3.9 ms 494.2 ms ± 6.1 ms
While this improvement looks rather modest for these testcases (because
all the previous optimizations were sufficient to nearly remove all time
spent in rename detection already), consider this alternative testcase
tweaked from the ones in commit 557ac0350d as follows
<Same initial setup as commit 557ac0350d, then...>
$ git switch -c add-empty-file v5.5
$ >drivers/gpu/drm/i915/new-empty-file
$ git add drivers/gpu/drm/i915/new-empty-file
$ git commit -m "new file"
$ git switch 5.4-rename
$ git cherry-pick --strategy=ort add-empty-file
For this testcase, we see the following improvement:
Before After
pick-empty: 1.936 s ± 0.024 s 688.1 ms ± 4.2 ms
So roughly a factor of 3 speedup. At $DAYJOB, there was a particular
repository and cherry-pick that inspired this optimization; for that
case I saw a speedup factor of 7 with this optimization.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two different reasons we might want a rename for a file -- for
three-way content merging or as part of directory rename detection.
Record the reason. diffcore-rename will potentially be able to filter
some of the ones marked as needed only for directory rename detection,
if it can determine those directory renames based solely on renames
found via exact rename detection and basename-guided rename detection.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit can only be effective if we have a computation of
the number of paths under a given directory which are still have pending
renames, and expected this number to be recorded in the dir_rename_count
map under the key UNKNOWN_DIR. Add the code necessary to compute these
values.
Note that this change means dir_rename_count might have a directory
whose only entry (for UNKNOWN_DIR) was removed by the time merge-ort
goes to check it. To account for this, merge-ort needs to check for the
case where the max count is 0.
With this change we are now computing the necessary value for each
directory in dirs_removed, but are not using that value anywhere. The
next two commits will make use of the values stored in dirs_removed in
order to compute whether each relevant_source (that is needed only for
directory rename detection) has become unnecessary.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in the past few commits, if we can determine that a directory
already has enough renames to determine how directory rename detection
will be decided for that directory, then we can mark that directory as
no longer needing any more renames detected for files underneath it.
For such directories, we change the value in the dirs_removed map from
RELEVANT_TO_SELF to RELEVANT_FOR_ANCESTOR.
A subsequent patch will use this information while iterating over the
remaining potential rename sources to mark ones that were only
location_relevant as unneeded if no containing directory is still marked
as RELEVANT_TO_SELF.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When one side adds files to a directory that the other side renamed,
directory rename detection is used to either move the new paths to the
newer directory or warn the user about the fact that another path
location might be better.
If a parent of the given directory had new files added to it, any
renames in the current directory are also part of determining where the
parent directory is renamed to. Thus, naively, we need to record each
rename N times for a path at depth N. However, we can use the
additional information added to dirs_removed in the last commit to avoid
traversing all N parent directories in many cases. Let's use an example
to explain how this works. If we have a path named
src/old_dir/a/b/file.c
and src/old_dir doesn't exist on one side of history, but the other
added a file named src/old_dir/newfile.c, then if one side renamed
src/old_dir/a/b/file.c => source/new_dir/a/b/file.c
then this file would affect potential directory rename detection counts
for
src/old_dir/a/b => source/new_dir/a/b
src/old_dir/a => source/new_dir/a
src/old_dir => source/new_dir
src => source
adding a weight of 1 to each in dir_rename_counts. However, if src/
exists on both sides of history, then we don't need to track any entries
for it in dir_rename_counts. That was implemented previously. What we
are adding now, is that if no new files were added to src/old_dir/a or
src/old_dir/b, then we don't need to have counts in dir_rename_count
for those directories either.
In short, we only need to track counts in dir_rename_count for
directories whose dirs_removed value is RELEVANT_FOR_SELF. And as soon
as we reach a directory that isn't in dirs_removed (signalled by
returning the default value of NOT_RELEVANT from strintmap_get()), we
can stop looking any further up the directory hierarchy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When one side of history renames a directory, and the other side of
history added files to the old directory, directory rename detection is
used to warn about the location of the added files so the user can
move them to the old directory or keep them with the new one.
This sets up three different types of directories:
* directories that had new files added to them
* directories underneath a directory that had new files added to them
* directories where no new files were added to it or any leading path
Save this information in dirs_removed; the next several commits will
make use of this information.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in the previous commit, we want to be able to take advantage of
the "majority rules" portion of directory rename detection to avoid
detecting more renames than necessary. However, for diffcore-rename to
take advantage of that, it needs to know whether a rename source file
was needed for just directory rename detection reasons, or if it is
wanted for potential three-way content merging. Modify relevant_sources
from a strset to a strintmap, so we can encode additional information.
We also modify dirs_removed from a strset to a strintmap at the same
time because trying to determine what files are needed for directory
rename detection will require us tracking a bit more information for
each directory.
This commit only changes the types of the two variables from strset to
strintmap; it does not actually store any special values yet and for now
only checks for presence of entries in the strintmap. Thus, the code is
functionally identical to how it behaved before. Future commits will
start associating values with each key for these two maps.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In directory rename detection (when a directory is removed on one side
of history and the other side adds new files to that directory), we work
to find where the greatest number of files within that directory were
renamed to so that the new files can be moved with the majority of the
files.
Naively, we can just do this by detecting renames for *all* files within
the removed/renamed directory, looking at all the destination
directories where files within that directory were moved, and if there
is more than one such directory then taking the one with the greatest
number of files as the directory where the old directory was renamed to.
However, sometimes there are enough renames from exact rename detection
or basename-guided rename detection that we have enough information to
determine the majority winner already. Add a function meant to compute
whether particular renames are still needed based on this majority rules
check. The next several commits will then add the necessary
infrastructure to get the information we need to compute which
additional rename sources we can skip.
An important side note for future further optimization:
There is a possible improvement to this optimization that I have not yet
attempted and will not be included in this series of patches: we could
first check whether exact renames provide enough information for us to
determine directory renames, and avoid doing basename-guided rename
detection on some or all of the RELEVANT_LOCATION files within those
directories. In effect, this variant would mean doing the
handle_early_known_dir_renames() both after exact rename detection and
again after basename-guided rename detection, though it would also mean
decrementing the number of "unknown" renames for each rename we found
from basename-guided rename detection. Adding this additional check for
skippable renames right after exact rename detection might turn out to
be valuable, especially for partial clones where it might allow us to
download certain source files entirely. However, this particular
optimization was actually the last one I did in original implementation
order, and by the time I implemented this idea, every testcase I had was
sufficiently fast that further optimization was unwarranted. If future
testcases arise that tax rename detection more heavily (or perhaps
partial clones can benefit from avoiding loading more objects), it may
be worth implementing this more involved variant.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests in t5300 and t7810 expect us to complain about a "--threads"
argument when Git is compiled without pthread support. Running these
under GIT_TEST_FAIL_PREREQS produces a confusing failure: we pretend to
the tests that there is no pthread support, so they expect the warning,
but of course the actual build is perfectly happy to respect the
--threads argument.
We never noticed before the recent a926c4b904 (tests: remove most uses
of C_LOCALE_OUTPUT, 2021-02-11), because the tests also were marked as
requiring the C_LOCALE_OUTPUT prerequisite. Which means they'd never
have run in FAIL_PREREQS mode, since it would always pretend that the
locale prereq was not satisfied.
These tests can't possibly work in this mode; it is a mismatch between
what the tests expect and what the build was told to do. So let's just
mark them to be skipped, using the special prereq introduced by
dfe1a17df9 (tests: add a special setup where prerequisites fail,
2019-05-13).
Reported-by: Son Luong Ngoc <sluongng@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create `enum conv_attrs_classification` to express the different ways
that attributes are handled for a blob during checkout.
This will be used in a later commit when deciding whether to add a file
to the parallel or delayed queue during checkout. For now, we can also
use it in get_stream_filter_ca() to simplify the function (as the
classifying logic is the same).
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like the previous patch, we will also need to call get_stream_filter()
with a precomputed `struct conv_attrs`, when we add support for parallel
checkout workers. So add the _ca() variant which takes the conversion
attributes struct as a parameter.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Separate the attribute gathering from the actual conversion by adding
_ca() variants of the conversion functions. These variants receive a
precomputed 'struct conv_attrs', not relying, thus, on an index state.
They will be used in a future patch adding parallel checkout support,
for two reasons:
- We will already load the conversion attributes in checkout_entry(),
before conversion, to decide whether a path is eligible for parallel
checkout. Therefore, it would be wasteful to load them again later,
for the actual conversion.
- The parallel workers will be responsible for reading, converting and
writing blobs to the working tree. They won't have access to the main
process' index state, so they cannot load the attributes. Instead,
they will receive the preloaded ones and call the _ca() variant of
the conversion functions. Furthermore, the attributes machinery is
optimized to handle paths in sequential order, so it's better to leave
it for the main process, anyway.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move convert_attrs() declaration from convert.c to convert.h, together
with the conv_attrs struct and the crlf_action enum. This function and
the data structures will be used outside convert.c in the upcoming
parallel checkout implementation. Note that crlf_action is renamed to
convert_crlf_action, which is more appropriate for the global namespace.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Validate that fsmonitor is valid to futureproof against bugs where
check_removed might be called from places that haven't refreshed.
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git to honor fsmonitor rather than issuing an lstat
when checking for dirty local deletes. Eliminates O(files)
lstats during `git diff HEAD`
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At 1d718a5108 ("do not overwrite untracked symlinks", 2011-02-20),
symlink.c:check_leading_path() started returning different codes for
FL_ENOENT and FL_SYMLINK. But one of its callers, unlink_entry(), was
not adjusted for this change, so it started to follow symlinks on the
leading path of to-be-removed entries. Fix that and add a regression
test.
Note that since 1d718a5108 check_leading_path() no longer differentiates
the case where it found a symlink in the path's leading components from
the cases where it found a regular file or failed to lstat() the
component. So, a side effect of this current patch is that
unlink_entry() now returns early in all of these three cases. And
because we no longer try to unlink such paths, we also don't get the
warning from remove_or_warn().
For the regular file and symlink cases, it's questionable whether the
warning was useful in the first place: unlink_entry() removes tracked
paths that should no longer be present in the state we are checking out
to. If the path had its leading dir replaced by another file, it means
that the basename already doesn't exist, so there is no need for a
warning. Sure, we are leaving a regular file or symlink behind at the
path's dirname, but this file is either untracked now (so again, no
need to warn), or it will be replaced by a tracked file during the next
phase of this checkout operation.
As for failing to lstat() one of the leading components, the basename
might still exist only we cannot unlink it (e.g. due to the lack of the
required permissions). Since the user expect it to be removed
(especially with checkout's --no-overlay option), add back the warning
in this more relevant case.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1d718a5108 ("do not overwrite untracked symlinks", 2011-02-20),
the comment on top of threaded_check_leading_path() is outdated and no
longer reflects the behavior of this function. Let's updated it to avoid
confusions. While we are here, also remove some duplicated comments to
avoid similar maintenance problems.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor code I recently changed in 1f3299fda9 (fsck: make
fsck_config() re-usable, 2021-01-05) so that I could use fsck's config
callback in mktag in 1f3299fda9 (fsck: make fsck_config() re-usable,
2021-01-05).
I don't know what I was thinking in structuring the code this way, but
it clearly makes no sense to have an fsck_config_internal() at all
just so it can get a fsck_options when git_config() already supports
passing along some void* data.
Let's just make use of that instead, which gets us rid of the two
wrapper functions, and brings fsck's common config callback in line
with other such reusable config callbacks.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 56c6910028 (fsmonitor: change last update timestamp on the
index_state to opaque token, 2020-01-07), we forgot to adjust
`discard_index()` to release the "last-update" token: it is no longer a
64-bit number, but a free-form string that has been allocated.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 56c6910028 (fsmonitor: change last update timestamp on the
index_state to opaque token, 2020-01-07), we forgot to adjust the part
of `unpack_trees()` that copies the FSMonitor "last-update" information
that we copy from the source index to the result index since 679f2f9fdd
(unpack-trees: skip stat on fsmonitor-valid files, 2019-11-20).
Since the "last-update" information is no longer a 64-bit number, but a
free-form string that has been allocated, we need to duplicate it rather
than just copying it.
This is important because there _are_ cases when `unpack_trees()` will
perform a oneway merge that implicitly calls `refresh_fsmonitor()`
(which will allocate that "last-update" token). This happens _after_
that token was copied into the result index. However, we _then_ call
`check_updates()` on that index, which will _also_ call
`refresh_fsmonitor()`, accessing the "last-update" string, which by now
would be released already.
In the instance that lead to this patch, this caused a segmentation
fault during a lengthy, complicated rebase involving the todo command
`reset` that (crucially) had to updated many files. Unfortunately, it
seems very hard to trigger that crash, therefore this patch is not
accompanied by a regression test.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch fixes a bug where git-bisect doesn't handle receiving
annotated tags as "git bisect good <tag>", etc. It's a regression in
27257bc466 (bisect--helper: reimplement `bisect_state` & `bisect_head`
shell functions in C, 2020-10-15).
The original shell code called:
sha=$(git rev-parse --verify "$rev^{commit}") ||
die "$(eval_gettext "Bad rev input: \$rev")"
which will peel the input to a commit (or complain if that's not
possible). But the C code just calls get_oid(), which will yield the oid
of the tag.
The fix is to peel to a commit. The error message here is a little
non-idiomatic for Git (since it starts with a capital). I've mostly left
it, as it matches the other converted messages (like the "Bad rev input"
we print when get_oid() fails), though I did add an indication that it
was the peeling that was the problem. It might be worth taking a pass
through this converted code to modernize some of the error messages.
Note also that the test does a bare "grep" (not i18ngrep) on the
expected "X is the first bad commit" output message. This matches the
rest of the test script.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
4f37d45706 ("clone: respect remote unborn HEAD", 2021-02-05) introduces
a new feature (if the remote has an unborn HEAD, e.g. when the remote
repository is empty, use it as the name of the branch) that only works
in protocol v2, but did not ensure that one of its tests always uses
protocol v2, and thus that test would fail if
GIT_TEST_PROTOCOL_VERSION=0 (or 1) is used. Therefore, add "-c
protocol.version=2" to the appropriate test.
(The rest of the tests from that commit have "-c protocol.version=2"
already added.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow BLOCK_GROWTH_SIZE to be used like an integer literal by removing
the trailing semicolon from its definition. Also wrap the expression in
parentheses, to allow it to be used with operators without leading to
unexpected results. It doesn't matter for the current use site, but
make it follow standard macro rules anyway to avoid future surprises.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
23119ffb4e (block-sha1: put expanded macro parameters in parentheses,
2012-07-22) added a trailing semicolon to the definition of SHA_MIX
without explanation. It doesn't matter with the current code, but make
sure to avoid potential surprises by removing it again.
This allows the macro to be used almost like a function: Users can
combine it with operators of their choice, but still must not pass an
expression with side-effects as a parameter, as it would be evaluated
multiple times.
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allocating a pre-cleared single element is quite common and it is
misleading to use CALLOC_ARRAY(); these allocations that would be
affected without this change are not allocating an array.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a wrapper class for `unix_stream_listen()` that uses a ".lock"
lockfile to create the unix domain socket in a race-free manner.
Unix domain sockets have a fundamental problem on Unix systems because
they persist in the filesystem until they are deleted. This is
independent of whether a server is actually listening for connections.
Well-behaved servers are expected to delete the socket when they
shutdown. A new server cannot easily tell if a found socket is
attached to an active server or is leftover cruft from a dead server.
The traditional solution used by `unix_stream_listen()` is to force
delete the socket pathname and then create a new socket. This solves
the latter (cruft) problem, but in the case of the former, it orphans
the existing server (by stealing the pathname associated with the
socket it is listening on).
We cannot directly use a .lock lockfile to create the socket because
the socket is created by `bind(2)` rather than the `open(2)` mechanism
used by `tempfile.c`.
As an alternative, we hold a plain lockfile ("<path>.lock") as a
mutual exclusion device. Under the lock, we test if an existing
socket ("<path>") is has an active server. If not, we create a new
socket and begin listening. Then we use "rollback" to delete the
lockfile in all cases.
This wrapper code conceptually exists at a higher-level than the core
unix_stream_connect() and unix_stream_listen() routines that it
consumes. It is isolated in a wrapper class for clarity.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calls to `chdir()` are dangerous in a multi-threaded context. If
`unix_stream_listen()` or `unix_stream_connect()` is given a socket
pathname that is too long to fit in a `sockaddr_un` structure, it will
`chdir()` to the parent directory of the requested socket pathname,
create the socket using a relative pathname, and then `chdir()` back.
This is not thread-safe.
Teach `unix_sockaddr_init()` to not allow calls to `chdir()` when this
flag is set.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update `unix_stream_listen()` to take an options structure to override
default behaviors. This commit includes the size of the `listen()` backlog.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The static helper function `unix_stream_socket()` calls `die()`. This
is not appropriate for all callers. Eliminate the wrapper function
and make the callers propagate the error.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create Windows implementation of "simple-ipc" using named pipes.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brief design documentation for new IPC mechanism allowing
foreground Git client to talk with an existing daemon process
at a known location using a named pipe or unix domain socket.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the calling sequence of `read_packetized_to_strbuf()` to take
an options argument and not assume a fixed set of options. Update the
only existing caller accordingly to explicitly pass the
formerly-assumed flags.
The `read_packetized_to_strbuf()` function calls `packet_read()` with
a fixed set of assumed options (`PACKET_READ_GENTLE_ON_EOF`). This
assumption has been fine for the single existing caller
`apply_multi_file_filter()` in `convert.c`.
In a later commit we would like to add other callers to
`read_packetized_to_strbuf()` that need a different set of options.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce PACKET_READ_GENTLE_ON_READ_ERROR option to help libify the
packet readers.
So far, the (possibly indirect) callers of `get_packet_data()` can ask
that function to return an error instead of `die()`ing upon end-of-file.
However, random read errors will still cause the process to die.
So let's introduce an explicit option to tell the packet reader
machinery to please be nice and only return an error on read errors.
This change prepares pkt-line for use by long-running daemon processes.
Such processes should be able to serve multiple concurrent clients and
and survive random IO errors. If there is an error on one connection,
a daemon should be able to drop that connection and continue serving
existing and future connections.
This ability will be used by a Git-aware "Builtin FSMonitor" feature
in a later patch series.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `packet_flush_gently()` call in `write_packetized_from_buf() and
`write_packetized_from_fd()` and require the caller to call it if desired.
Rename both functions to `write_packetized_from_*_no_flush()` to prevent
later merge accidents.
`write_packetized_from_buf()` currently only has one caller:
`apply_multi_file_filter()` in `convert.c`. It always wants a flush packet
to be written after writing the payload.
However, we are about to introduce a caller that wants to write many
packets before a final flush packet, so let's make the caller responsible
for emitting the flush packet.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach `packet_write_gently()` to write the pkt-line header and the actual
buffer in 2 separate calls to `write_in_full()` and avoid the need for a
static buffer, thread-safe scratch space, or an excessively large stack
buffer.
Change `write_packetized_from_fd()` to allocate a temporary buffer rather
than using a static buffer to avoid similar issues here.
These changes are intended to make it easier to use pkt-line routines in
a multi-threaded context with multiple concurrent writers writing to
different streams.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git commit --fixup=reword:<commit>` aliases
`--fixup=amend:<commit> --only`, where it creates an empty "amend!"
commit that will reword <commit> without changing its contents when
it is rebased with `--autosquash`.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git commit --fixup=amend:<commit>` will create an "amend!" commit.
The resulting commit message subject will be "amend! ..." where
"..." is the subject line of <commit> and the initial message
body will be <commit>'s message.
The "amend!" commit when rebased with --autosquash will fixup the
contents and replace the commit message of <commit> with the
"amend!" commit's message body.
In order to prevent rebase from creating commits with an empty
message we refuse to create an "amend!" commit if commit message
body is empty.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Disable the recent mergetool's hideresolved feature by default for
backward compatibility and safety.
* jn/mergetool-hideresolved-is-optional:
doc: describe mergetool configuration in git-mergetool(1)
mergetool: do not enable hideResolved by default
template_dir starts off pointing to either argv or nothing. However if
the value supplied in argv is a relative path, absolute_pathdup() is
used to turn it into an absolute path. absolute_pathdup() allocates
a new string, and we then "leak" it when cmd_init_db() completes.
We don't bother to actually free the return value (instead we UNLEAK
it), because there's no significant advantage to doing so here.
Correctly freeing it would require more significant changes to code flow
which would be more noisy than beneficial.
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The primary goal of this change is to stop leaking init_db_template_dir.
This leak can happen because:
1. git_init_db_config() allocates new memory into init_db_template_dir
without first freeing the existing value.
2. init_db_template_dir might already contain data, either because:
2.1 git_config() can be invoked twice with this callback in a single
process - at least 2 allocations are likely.
2.2 A single git_config() allocation can invoke the callback multiple
times for a given key (see further explanation in the function
docs) - each of those calls will trigger another leak.
The simplest fix for the leak would be to free(init_db_template_dir)
before overwriting it. Instead we choose to convert to fetching
init.templatedir via git_config_get_value() as that is more explicit,
more efficient, and avoids allocations (the returned result is owned by
the config cache, so we aren't responsible for freeing it).
If we remove init_db_template_dir, git_init_db_config() ends up being
responsible only for forwarding core.* config values to
platform_core_config(). However platform_core_config() already ignores
non-core.* config values, so we can safely remove git_init_db_config()
and invoke git_config() directly with platform_core_config() as the
callback.
The platform_core_config forwarding was originally added in:
287853392a (mingw: respect core.hidedotfiles = false in git-init again, 2019-03-11
And I suspect the potential for a leak existed since the original
implementation of git_init_db_config in:
90b45187ba (Add `init.templatedir` configuration variable., 2010-02-17)
LSAN output from t0001:
Direct leak of 73 byte(s) in 1 object(s) allocated from:
#0 0x49a859 in realloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x9a7276 in xrealloc /home/ahunt/oss-fuzz/git/wrapper.c:126:8
#2 0x9362ad in strbuf_grow /home/ahunt/oss-fuzz/git/strbuf.c:98:2
#3 0x936eaa in strbuf_add /home/ahunt/oss-fuzz/git/strbuf.c:295:2
#4 0x868112 in strbuf_addstr /home/ahunt/oss-fuzz/git/./strbuf.h:304:2
#5 0x86a8ad in expand_user_path /home/ahunt/oss-fuzz/git/path.c:758:2
#6 0x720bb1 in git_config_pathname /home/ahunt/oss-fuzz/git/config.c:1287:10
#7 0x5960e2 in git_init_db_config /home/ahunt/oss-fuzz/git/builtin/init-db.c:161:11
#8 0x7255b8 in configset_iter /home/ahunt/oss-fuzz/git/config.c:1982:7
#9 0x7253fc in repo_config /home/ahunt/oss-fuzz/git/config.c:2311:2
#10 0x725ca7 in git_config /home/ahunt/oss-fuzz/git/config.c:2399:2
#11 0x593e8d in create_default_files /home/ahunt/oss-fuzz/git/builtin/init-db.c:225:2
#12 0x5935c6 in init_db /home/ahunt/oss-fuzz/git/builtin/init-db.c:449:11
#13 0x59588e in cmd_init_db /home/ahunt/oss-fuzz/git/builtin/init-db.c:714:9
#14 0x4cd60d in run_builtin /home/ahunt/oss-fuzz/git/git.c:453:11
#15 0x4cb2da in handle_builtin /home/ahunt/oss-fuzz/git/git.c:704:3
#16 0x4ccc37 in run_argv /home/ahunt/oss-fuzz/git/git.c:771:4
#17 0x4cac29 in cmd_main /home/ahunt/oss-fuzz/git/git.c:902:19
#18 0x69c4de in main /home/ahunt/oss-fuzz/git/common-main.c:52:11
#19 0x7f23552d6349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure that we release the temporary strbuf during dwim_branch() for
all codepaths (and not just for the early return).
This leak appears to have been introduced in:
f60a7b763f (worktree: teach "add" to check out existing branches, 2018-04-24)
Note that UNLEAK(branchname) is still needed: the returned result is
used in add(), and is stored in a pointer which is used to point at one
of:
- a string literal ("HEAD")
- member of argv (whatever the user specified in their invocation)
- or our newly allocated string returned from dwim_branch()
Fixing the branchname leak isn't impossible, but does not seem
worthwhile given that add() is called directly from cmd_main(), and
cmd_main() returns immediately thereafter - UNLEAK is good enough.
This leak was found when running t0001 with LSAN, see also LSAN output
below:
Direct leak of 60 byte(s) in 1 object(s) allocated from:
#0 0x49a859 in realloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x9ab076 in xrealloc /home/ahunt/oss-fuzz/git/wrapper.c:126:8
#2 0x939fcd in strbuf_grow /home/ahunt/oss-fuzz/git/strbuf.c:98:2
#3 0x93af53 in strbuf_splice /home/ahunt/oss-fuzz/git/strbuf.c:239:3
#4 0x83559a in strbuf_check_branch_ref /home/ahunt/oss-fuzz/git/object-name.c:1593:2
#5 0x6988b9 in dwim_branch /home/ahunt/oss-fuzz/git/builtin/worktree.c:454:20
#6 0x695f8f in add /home/ahunt/oss-fuzz/git/builtin/worktree.c:525:19
#7 0x694a04 in cmd_worktree /home/ahunt/oss-fuzz/git/builtin/worktree.c:1036:10
#8 0x4cd60d in run_builtin /home/ahunt/oss-fuzz/git/git.c:453:11
#9 0x4cb2da in handle_builtin /home/ahunt/oss-fuzz/git/git.c:704:3
#10 0x4ccc37 in run_argv /home/ahunt/oss-fuzz/git/git.c:771:4
#11 0x4cac29 in cmd_main /home/ahunt/oss-fuzz/git/git.c:902:19
#12 0x69caee in main /home/ahunt/oss-fuzz/git/common-main.c:52:11
#13 0x7f7b7dd10349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of these pointers can safely be freed when cmd_clone() completes,
therefore we make sure to free them. The one exception is that we
have to UNLEAK(repo) because it can point either to argv[0], or a
malloc'd string returned by absolute_pathdup().
We also have to free(path) in the middle of cmd_clone(): later during
cmd_clone(), path is unconditionally overwritten with a different path,
triggering a leak. Freeing the first path immediately after use (but
only in the case where it contains data) seems like the cleanest
solution, as opposed to freeing it unconditionally before path is reused
for another path. This leak appears to have been introduced in:
f38aa83f9a (use local cloning if insteadOf makes a local URL, 2014-07-17)
These leaks were found when running t0001 with LSAN, see also an excerpt
of the LSAN output below (the full list is omitted because it's far too
long, and mostly consists of indirect leakage of members of the refs we
are freeing).
Direct leak of 178 byte(s) in 1 object(s) allocated from:
#0 0x49a53d in malloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0x9a6ff4 in do_xmalloc /home/ahunt/oss-fuzz/git/wrapper.c:41:8
#2 0x9a6fca in xmalloc /home/ahunt/oss-fuzz/git/wrapper.c:62:9
#3 0x8ce296 in copy_ref /home/ahunt/oss-fuzz/git/remote.c:885:8
#4 0x8d2ebd in guess_remote_head /home/ahunt/oss-fuzz/git/remote.c:2215:10
#5 0x51d0c5 in cmd_clone /home/ahunt/oss-fuzz/git/builtin/clone.c:1308:4
#6 0x4cd60d in run_builtin /home/ahunt/oss-fuzz/git/git.c:453:11
#7 0x4cb2da in handle_builtin /home/ahunt/oss-fuzz/git/git.c:704:3
#8 0x4ccc37 in run_argv /home/ahunt/oss-fuzz/git/git.c:771:4
#9 0x4cac29 in cmd_main /home/ahunt/oss-fuzz/git/git.c:902:19
#10 0x69c45e in main /home/ahunt/oss-fuzz/git/common-main.c:52:11
#11 0x7f6a459d5349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 165 byte(s) in 1 object(s) allocated from:
#0 0x49a53d in malloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0x9a6fc4 in do_xmalloc /home/ahunt/oss-fuzz/git/wrapper.c:41:8
#2 0x9a6f9a in xmalloc /home/ahunt/oss-fuzz/git/wrapper.c:62:9
#3 0x8ce266 in copy_ref /home/ahunt/oss-fuzz/git/remote.c:885:8
#4 0x51e9bd in wanted_peer_refs /home/ahunt/oss-fuzz/git/builtin/clone.c:574:21
#5 0x51cfe1 in cmd_clone /home/ahunt/oss-fuzz/git/builtin/clone.c:1284:17
#6 0x4cd60d in run_builtin /home/ahunt/oss-fuzz/git/git.c:453:11
#7 0x4cb2da in handle_builtin /home/ahunt/oss-fuzz/git/git.c:704:3
#8 0x4ccc37 in run_argv /home/ahunt/oss-fuzz/git/git.c:771:4
#9 0x4cac29 in cmd_main /home/ahunt/oss-fuzz/git/git.c:902:19
#10 0x69c42e in main /home/ahunt/oss-fuzz/git/common-main.c:52:11
#11 0x7f8fef0c2349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 178 byte(s) in 1 object(s) allocated from:
#0 0x49a53d in malloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0x9a6ff4 in do_xmalloc /home/ahunt/oss-fuzz/git/wrapper.c:41:8
#2 0x9a6fca in xmalloc /home/ahunt/oss-fuzz/git/wrapper.c:62:9
#3 0x8ce296 in copy_ref /home/ahunt/oss-fuzz/git/remote.c:885:8
#4 0x8d2ebd in guess_remote_head /home/ahunt/oss-fuzz/git/remote.c:2215:10
#5 0x51d0c5 in cmd_clone /home/ahunt/oss-fuzz/git/builtin/clone.c:1308:4
#6 0x4cd60d in run_builtin /home/ahunt/oss-fuzz/git/git.c:453:11
#7 0x4cb2da in handle_builtin /home/ahunt/oss-fuzz/git/git.c:704:3
#8 0x4ccc37 in run_argv /home/ahunt/oss-fuzz/git/git.c:771:4
#9 0x4cac29 in cmd_main /home/ahunt/oss-fuzz/git/git.c:902:19
#10 0x69c45e in main /home/ahunt/oss-fuzz/git/common-main.c:52:11
#11 0x7f6a459d5349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 165 byte(s) in 1 object(s) allocated from:
#0 0x49a6b2 in calloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0x9a72f2 in xcalloc /home/ahunt/oss-fuzz/git/wrapper.c:140:8
#2 0x8ce203 in alloc_ref_with_prefix /home/ahunt/oss-fuzz/git/remote.c:867:20
#3 0x8ce1a2 in alloc_ref /home/ahunt/oss-fuzz/git/remote.c:875:9
#4 0x72f63e in process_ref_v2 /home/ahunt/oss-fuzz/git/connect.c:426:8
#5 0x72f21a in get_remote_refs /home/ahunt/oss-fuzz/git/connect.c:525:8
#6 0x979ab7 in handshake /home/ahunt/oss-fuzz/git/transport.c:305:4
#7 0x97872d in get_refs_via_connect /home/ahunt/oss-fuzz/git/transport.c:339:9
#8 0x9774b5 in transport_get_remote_refs /home/ahunt/oss-fuzz/git/transport.c:1388:4
#9 0x51cf80 in cmd_clone /home/ahunt/oss-fuzz/git/builtin/clone.c:1271:9
#10 0x4cd60d in run_builtin /home/ahunt/oss-fuzz/git/git.c:453:11
#11 0x4cb2da in handle_builtin /home/ahunt/oss-fuzz/git/git.c:704:3
#12 0x4ccc37 in run_argv /home/ahunt/oss-fuzz/git/git.c:771:4
#13 0x4cac29 in cmd_main /home/ahunt/oss-fuzz/git/git.c:902:19
#14 0x69c45e in main /home/ahunt/oss-fuzz/git/common-main.c:52:11
#15 0x7f6a459d5349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 105 byte(s) in 1 object(s) allocated from:
#0 0x49a859 in realloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x9a71f6 in xrealloc /home/ahunt/oss-fuzz/git/wrapper.c:126:8
#2 0x93622d in strbuf_grow /home/ahunt/oss-fuzz/git/strbuf.c:98:2
#3 0x937a73 in strbuf_addch /home/ahunt/oss-fuzz/git/./strbuf.h:231:3
#4 0x939fcd in strbuf_add_absolute_path /home/ahunt/oss-fuzz/git/strbuf.c:911:4
#5 0x69d3ce in absolute_pathdup /home/ahunt/oss-fuzz/git/abspath.c:261:2
#6 0x51c688 in cmd_clone /home/ahunt/oss-fuzz/git/builtin/clone.c:1021:10
#7 0x4cd60d in run_builtin /home/ahunt/oss-fuzz/git/git.c:453:11
#8 0x4cb2da in handle_builtin /home/ahunt/oss-fuzz/git/git.c:704:3
#9 0x4ccc37 in run_argv /home/ahunt/oss-fuzz/git/git.c:771:4
#10 0x4cac29 in cmd_main /home/ahunt/oss-fuzz/git/git.c:902:19
#11 0x69c45e in main /home/ahunt/oss-fuzz/git/common-main.c:52:11
#12 0x7f6a459d5349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
dwim_ref() allocs a new string into ref. Instead of setting to NULL to
discard it, we can FREE_AND_NULL.
This leak appears to have been introduced in:
4cf76f6bbf (builtin/reset: compute checkout metadata for reset, 2020-03-16)
This leak was found when running t0001 with LSAN, see also LSAN output below:
Direct leak of 5 byte(s) in 1 object(s) allocated from:
#0 0x486514 in strdup /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_interceptors.cpp:452:3
#1 0x9a7108 in xstrdup /home/ahunt/oss-fuzz/git/wrapper.c:29:14
#2 0x8add6b in expand_ref /home/ahunt/oss-fuzz/git/refs.c:670:12
#3 0x8ad777 in repo_dwim_ref /home/ahunt/oss-fuzz/git/refs.c:644:22
#4 0x6394af in dwim_ref /home/ahunt/oss-fuzz/git/./refs.h:162:9
#5 0x637e5c in cmd_reset /home/ahunt/oss-fuzz/git/builtin/reset.c:426:4
#6 0x4cd60d in run_builtin /home/ahunt/oss-fuzz/git/git.c:453:11
#7 0x4cb2da in handle_builtin /home/ahunt/oss-fuzz/git/git.c:704:3
#8 0x4ccc37 in run_argv /home/ahunt/oss-fuzz/git/git.c:771:4
#9 0x4cac29 in cmd_main /home/ahunt/oss-fuzz/git/git.c:902:19
#10 0x69c5ce in main /home/ahunt/oss-fuzz/git/common-main.c:52:11
#11 0x7f57ebb9d349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
shorten_unambiguous_ref() returns an allocated string. We have to
track it separately from the const refname.
This leak has existed since:
9ab55daa55 (git symbolic-ref --delete $symref, 2012-10-21)
This leak was found when running t0001 with LSAN, see also LSAN output
below:
Direct leak of 19 byte(s) in 1 object(s) allocated from:
#0 0x486514 in strdup /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_interceptors.cpp:452:3
#1 0x9ab048 in xstrdup /home/ahunt/oss-fuzz/git/wrapper.c:29:14
#2 0x8b452f in refs_shorten_unambiguous_ref /home/ahunt/oss-fuzz/git/refs.c
#3 0x8b47e8 in shorten_unambiguous_ref /home/ahunt/oss-fuzz/git/refs.c:1287:9
#4 0x679fce in check_symref /home/ahunt/oss-fuzz/git/builtin/symbolic-ref.c:28:14
#5 0x679ad8 in cmd_symbolic_ref /home/ahunt/oss-fuzz/git/builtin/symbolic-ref.c:70:9
#6 0x4cd60d in run_builtin /home/ahunt/oss-fuzz/git/git.c:453:11
#7 0x4cb2da in handle_builtin /home/ahunt/oss-fuzz/git/git.c:704:3
#8 0x4ccc37 in run_argv /home/ahunt/oss-fuzz/git/git.c:771:4
#9 0x4cac29 in cmd_main /home/ahunt/oss-fuzz/git/git.c:902:19
#10 0x69cc6e in main /home/ahunt/oss-fuzz/git/common-main.c:52:11
#11 0x7f98388a4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fc47391e24 (drop vcs-svn experiment, 2020-08-13) removed most vcs-svn
files. Drop the remaining header files as well, as they are no longer
used.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make CALLOC_ARRAY usable like a function by requiring callers to supply
the trailing semicolon, which all of the current ones already do. With
the extra semicolon e.g. the following code wouldn't compile because it
disconnects the "else" from the "if":
if (condition)
CALLOC_ARRAY(ptr, n);
else
whatever();
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the EXAMPLES section, git-push(1) says that 'git push origin' pushes
the current branch to the value of the 'remote.origin.merge'
configuration.
This wording (which dates back to b2ed944af7 (push: switch default from
"matching" to "simple", 2013-01-04)) is incorrect. There is no such
configuration as 'remote.<name>.merge'. This likely was originally
intended to read "branch.<name>.merge" instead.
Indeed, when 'push.default' is 'simple' (which is the default value, and
is applicable in this scenario per "without additional configuration"),
setup_push_upstream() dies if the branch's local name does not match
'branch.<name>.merge'.
Correct this long-standing typo to resolve some recent confusion on the
intended behavior of this example.
Reported-by: Adam Sharafeddine <adam.shrfdn@gmail.com>
Reported-by: Fabien Terrani <terranifabien@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, this describes mergetool.hideResolved, which can help
users discover this setting (either because it may be useful to them
or in order to understand mergetool's behavior if they have forgotten
setting it in the past).
Tested by running
make -C Documentation git-mergetool.1
man Documentation/git-mergetool.1
and reading through the page.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 98ea309b3f (mergetool: add hideResolved configuration,
2021-02-09) introduced the mergetool.hideResolved setting to reduce
the clutter in viewing non-conflicted sections of files in a
mergetool, it enabled it by default, explaining:
No adverse effects were noted in a small survey of popular mergetools[1]
so this behavior defaults to `true`.
In practice, alas, adverse effects do appear. A few issues:
1. No indication is shown in the UI that the base, local, and remote
versions shown have been modified by additional resolution. This
is inherent in the design: the idea of mergetool.hideResolved is to
convince a mergetool that expects pristine local, base, and remote
files to show partially resolved verisons of those files instead;
there is no additional source of information accessible to the
mergetool to see where the resolution has happened.
(By contrast, a mergetool generating the partial resolution from
conflict markers for itself would be able to hilight the resolved
sections with a different color.)
A user accustomed to seeing the files without partial resolution
gets no indication that this behavior has changed when they upgrade
Git.
2. If the computed merge did not line up the files correctly (for
example due to repeated sections in the file), the partially
resolved files can be misleading and do not have enough information
to reconstruct what happened and compute the correct merge result.
3. Resolving a conflict can involve information beyond the textual
conflict. For example, if the local and remote versions added
overlapping functionality in different ways, seeing the full
unresolved versions of each alongside the base gives information
about each side's intent that makes it possible to come up with a
resolution that combines those two intents. By contrast, when
starting with partially resolved versions of those files, one can
produce a subtly wrong resolution that includes redundant extra
code added by one side that is not needed in the approach taken
on the other.
All that said, a user wanting to focus on textual conflicts with
reduced clutter can still benefit from mergetool.hideResolved=true as
a way to deemphasize sections of the code that resolve cleanly without
requiring any changes to the invoked mergetool. The caveats described
above are reduced when the user has explicitly turned this on, because
then the user is aware of them.
Flip the default to 'false'.
Reported-by: Dana Dahlstrom <dahlstrom@google.com>
Helped-by: Seth House <seth@eseth.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
credential_approve() already checks for a non-empty password before
saving, so there's no need to do the extra check here.
Signed-off-by: John Szakmeister <john@szakmeister.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already looked for the PKI credentials in the credential store, but
failed to approve it on success. Meaning, the PKI certificate password
was never stored and git would request it on every connection to the
remote. Let's complete the chain by storing the certificate password on
success.
Likewise, we also need to reject the credential when there is a failure.
Curl appears to report client-related certificate issues are reported
with the CURLE_SSL_CERTPROBLEM error. This includes not only a bad
password, but potentially other client certificate related problems.
Since we cannot get more information from curl, we'll go ahead and
reject the credential upon receiving that error, just to be safe and
avoid caching or saving a bad password.
Signed-off-by: John Szakmeister <john@szakmeister.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Every %(describe) placeholder in $Format:...$ strings in files with the
attribute export-subst is expanded by calling git describe. This can
potentially result in a lot of such calls per archive. That's OK for
local repositories under control of the user of git archive, but could
be a problem for hosted repositories.
Expand only a single %(describe) placeholder per archive for now to
avoid denial-of-service attacks. We can make this limit configurable
later if needed, but let's start out simple.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The basename comparison optimization implemented in
find_basename_matches() is very beneficial since it allows a source to
sometimes only be compared with one other file instead of N other files.
When a match is found, both a source and destination can be removed from
the matrix of inexact rename comparisons. In contrast, the irrelevant
source optimization only allows us to remove a source from the matrix of
inexact rename comparisons...but it has the advantage of allowing a
source file to not even be loaded into memory at all and be compared to
0 other files. Generally, not even comparing is a bigger performance
win, so when both optimizations could apply, prefer to use the
irrelevant-source optimization.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 5.708 s ± 0.111 s 5.680 s ± 0.096 s
mega-renames: 102.171 s ± 0.440 s 13.812 s ± 0.162 s
just-one-mega: 3.471 s ± 0.015 s 506.0 ms ± 3.9 ms
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diffcore_rename_extended() will do a bunch of setup, then check for
exact renames, then abort before inexact rename detection if there are
no more sources or destinations that need to be matched. It will
sometimes be the case, however, that either
* we start with neither any sources or destinations
* we start with no *relevant* sources
In the first of these two cases, the setup and exact rename detection
will be very cheap since there are 0 files to operate on. In the second
case, it is quite possible to have thousands of files with none of the
source ones being relevant. Avoid calling diffcore_rename_extended() or
even some of the setup before diffcore_rename_extended() when we can
determine that rename detection is unnecessary.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 6.003 s ± 0.048 s 5.708 s ± 0.111 s
mega-renames: 114.009 s ± 0.236 s 102.171 s ± 0.440 s
just-one-mega: 3.489 s ± 0.017 s 3.471 s ± 0.015 s
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The past several commits determined conditions when rename sources might
be needed, and filled a relevant_sources strset with those paths. Pass
these along to diffcore_rename_extended() to use to limit the sources
that we need to detect renames for.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 12.596 s ± 0.061 s 6.003 s ± 0.048 s
mega-renames: 130.465 s ± 0.259 s 114.009 s ± 0.236 s
just-one-mega: 3.958 s ± 0.010 s 3.489 s ± 0.017 s
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of directory rename detection is that if one side of history
renames a directory, and the other side adds new files under the old
directory, then the merge can move those new files into the new
directory. This leads to the following important observation:
* If the other side does not add any new files under the old
directory, we do not need to detect any renames for that directory.
Similarly, directory rename detection had an important requirement:
* If a directory still exists on one side of history, it has not been
renamed on that side of history. (See section 4 of t6423 or
Documentation/technical/directory-rename-detection.txt for more
details).
Using these two bits of information, we note that directory rename
detection is only needed in cases where (1) directories exist in the
merge base and on one side of history (i.e. dirmask == 3 or dirmask ==
5), and (2) where there is some new file added to that directory on the
side where it still exists (thus where the file has filemask == 2 or
filemask == 4, respectively). This has to be done in two steps, because
we have the dirmask when we are first considering the directory, and
won't get the filemasks for the files within it until we recurse into
that directory. So, we save
dir_rename_mask = dirmask - 1
when we hit a directory that is missing on one side, and then later look
for cases of
filemask == dir_rename_mask
One final note is that as soon as we hit a directory that needs
directory rename detection, we will need to detect renames in all
subdirectories of that directory as well due to the "majority rules"
decision when files are renamed into different directory hierarchies.
We arbitrarily use the special value of 0x07 to record when we've hit
such a directory.
The combination of all the above mean that we introduce a variable
named dir_rename_mask (couldn't think of a better name) which has one
of the following values as we traverse into a directory:
* 0x00: directory rename detection not needed
* 0x02 or 0x04: directory rename detection only needed if files added
* 0x07: directory rename detection definitely needed
We then pass this value through to add_pairs() so that it can mark
location_relevant as true only when dir_rename_mask is 0x07.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add traverse_trees_wrapper() and traverse_trees_wrapper_callback()
functions. The former runs traverse_trees() with info->fn set to
traverse_trees_wrapper_callback, in order to simply save all the entries
without processing or recursing into any of them. This step allows
extra computation to be done (e.g. checking some condition across all
files) that can be used later. Then, after that is completed, it
iterates over all the saved entries and calls the original info->fn
callback with the saved data.
Currently, this does nothing more than marginally slowing down the tree
traversal since we do not take advantage of the opportunity to compute
anything special in traverse_trees_wrapper_callback(), and thus the real
callback will be called identically as it would have been without this
extra wrapper. However, a subsequent commit will add some special
computation of some values that the real callback will be able to use.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to determine whether directory rename detection is needed, we
as a pre-requisite need a way to traverse through all the files in a
given tree before visiting any directories within that tree.
traverse_trees() only iterates through the entries in the order they
appear, so add some data structures that will store all the entries as
we iterate through them in traverse_trees(), which will allow us to
re-traverse them in our desired order.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rename detection works by trying to pair all file deletions (or
"sources") with all file additions (or "destinations"), checking
similarity, and then marking the sufficiently similar ones as renames.
This can be expensive if there are many sources and destinations on a
given side of history as it results in an N x M comparison matrix.
However, there are many cases where we can compute in advance that
detecting renames for some of the sources provides no useful information
and thus that we can exclude those sources from the matrix.
To see why, first note that the merge machinery uses detected renames in
two ways:
* directory rename detection: when one side of history renames a
directory, and the other side of history adds new files to that
directory, we want to be able to warn the user about the need to
chose whether those new files stay in the old directory or move
to the new one.
* three-way content merging: in order to do three-way content merging
of files, we need three different file versions. If one side of
history renamed a file, then some of the content for the file is
found under a different path than in the merge base or on the
other side of history.
Add a simple testcase showing the two kinds of reasons renames are
relevant; it's a testcase that will only pass if we detect both kinds of
needed renames.
Other than the testcase added above, this commit concentrates just on
the three-way content merging; it will punt and mark all sources as
needed for directory rename detection, and leave it to future commits to
narrow that down more.
The point of three-way content merging is to reconcile changes made on
*both* sides of history. What if the file wasn't modified on both
sides? There are two possibilities:
* If it wasn't modified on the renamed side:
-> then we get to do exact rename detection, which is cheap.
* If it wasn't modified on the unrenamed side:
-> then detection of a rename for that source file is irrelevant
That latter claim might be surprising at first, so let's walk through a
case to show why rename detection for that source file is irrelevant.
Let's use two filenames, old.c & new.c, with the following abbreviated
object ids (and where the value '000000' is used to denote that the file
is missing in that commit):
old.c new.c
MERGE_BASE: 01d01d 000000
MERGE_SIDE1: 01d01d 000000
MERGE_SIDE2: 000000 5e1ec7
If the rename *isn't* detected:
then old.c looks like it was unmodified on one side and deleted on
the other and should thus be removed. new.c looks like a new file we
should keep as-is.
If the rename *is* detected:
then a three-way content merge is done. Since the version of the
file in MERGE_BASE and MERGE_SIDE1 are identical, the three-way merge
will produce exactly the version of the file whose abbreviated
object id is 5e1ec7. It will record that file at the path new.c,
while removing old.c from the directory.
Note that these two results are identical -- a single file named 'new.c'
with object id 5e1ec7. In other words, it doesn't matter if the rename
is detected in the case where the file is unmodified on the unrenamed
side.
Use this information to compute whether we need rename detection for
each source created in add_pair().
It's probably worth noting that there used to be a few other edge or
corner cases besides three-way content merges and directory rename
detection where lack of rename detection could have affected the result,
but those cases actually highlighted where conflict resolution methods
were not consistent with each other. Fixing those inconsistencies were
thus critically important to enabling this optimization. That work
involved the following:
* bringing consistency to add/add, rename/add, and rename/rename
conflict types, as done back in the topic merged at commit
ac193e0e0a ("Merge branch 'en/merge-path-collision'", 2019-01-04),
and further extended in commits 2a7c16c980 ("t6422, t6426: be more
flexible for add/add conflicts involving renames", 2020-08-10) and
e8eb99d4a6 ("t642[23]: be more flexible for add/add conflicts
involving pair renames", 2020-08-10)
* making rename/delete more consistent with modify/delete
as done in commits 1f3c9ba707 ("t6425: be more flexible with
rename/delete conflict messages", 2020-08-10) and 727c75b23f
("t6404, t6423: expect improved rename/delete handling in ort
backend", 2020-10-26)
Since the set of relevant_sources we compute has not yet been narrowed
down for directory rename detection, we do not pass it to
diffcore_rename_extended() yet. That will be done after subsequent
commits narrow down the list of relevant_sources needed for directory
rename detection reasons.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the ability to diffcore_rename_extended() to allow external callers
to declare that they only need renames detected for a subset of source
files, and use that information to skip detecting renames for them.
There are two important pieces to this optimization that may not be
obvious at first glance:
* We do not require callers to just filter the filepairs out
to remove the non-relevant sources, because exact rename detection
is fast and when it finds a match it can remove both a source and a
destination whereas the relevant_sources filter can only remove a
source.
* We need to filter out the source pairs in a preliminary pass instead
of adding a
strset_contains(relevant_sources, one->path)
check within the nested matrix loop. The reason for that is if we
have 30k renames, doing 30k * 30k = 900M strset_contains() calls
becomes extraordinarily expensive and defeats the performance gains
from this change; we only want to do 30k such calls instead.
If callers pass NULL for relevant_sources, that is special cases to
treat all sources as relevant. Since all callers currently pass NULL,
this optimization does not yet have any effect. Subsequent commits will
have merge-ort compute a set of relevant_sources to restrict which
sources we detect renames for, and have merge-ort pass that set of
relevant_sources to diffcore_rename_extended().
A note about filtering order:
Some may be curious why we don't filter out irrelevant sources at the
same time we filter out exact renames. While that technically could be
done at this point, there are two reasons to defer it:
First, was to reinforce a lesson that was too easy to forget. As I
mentioned above, in the past I filtered irrelevant sources out before
exact rename checking, and then discovered that exact renames' ability
to remove both sources and destinations was an important consideration
and thus doing the filtering after exact rename checking would speed
things up. Then at some point I realized that basename matching could
also remove both sources and destinations, and decided to put irrelevant
source filtering after basename filtering. That slowed things down a
lot. But, despite learning about this important ordering, in later
restructuring I forgot and made the same mistake of putting the
filtering after basename guided rename detection again. So, I have this
series of patches structured to do the irrelevant filtering last to
start to show how much extra it costs, and then add relevant filtering
in to find_basename_matches() to show how much it speeds things up.
Basically, it's a way to reinforce something that apparently was too
easy to forget, and make sure the commit messages record this lesson.
Second, the items in the "relevant_sources" in this patch series will
include all sources that *might be* relevant. It has to be conservative
and catch anything that might need a rename, but in the patch series
after this one we'll find ways to weed out more of the *might be*
relevant ones. Unfortunately, merge-ort does not have sufficient
information to weed those ones out, and there isn't enough information
at the time of filtering exact renames out to remove the extra ones
either. It has to be deferred. So the deferral is in part to simplify
some later additions.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 552955ed7f ("clone: use more conventional config/option layering",
2020-10-01), clone learned to read configuration options earlier in its
execution, before creating the new repository. However, that led to a
problem: if the core.bare setting is set to false in the global config,
cloning a bare repository segfaults. This happens because the
repository is falsely thought to be non-bare, but clone has set the work
tree to NULL, which is then dereferenced.
The code to initialize the repository already considers the fact that a
user might want to override the --bare option for git init, but it
doesn't take into account clone, which uses a different option. Let's
just check that the work tree is not NULL, since that's how clone
indicates that the repository is bare. This is also the case for git
init, so we won't be regressing that case.
Reported-by: Joseph Vusich <jvusich@amazon.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checking whether a commit was rewritten to a single object id, we
use a glob that insists on a 40-hex result. This works for sha1, but
fails t7003 when run with GIT_TEST_DEFAULT_HASH=sha256.
Since the previous commit simplified the case statement here, we only
have two arms: an empty string or a single object id. We can just loosen
our glob to match anything, and still distinguish those cases (we lose
the ability to notice bogus input, but that's not a problem; we are the
one who wrote the map in the first place, and anyway update-ref will
complain loudly if the input isn't a valid hash).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a ref maps to a commit that is neither rewritten nor kept by
filter-branch (e.g., because it was eliminated by rev-list's pathspec
selection), we rewrite it to its nearest ancestor.
Since the initial commit in 6f6826c52b (Add git-filter-branch,
2007-06-03), we have warned when there are multiple such ancestors in
the map file. However, the warning code is impossible to trigger these
days. Since a0e46390d3 (filter-branch: fix ref rewriting with
--subdirectory-filter, 2008-08-12), we find the ancestor using "rev-list
-1", so it can only ever have a single value.
This code is made doubly confusing by the fact that we append to the map
file when mapping ancestors. However, this can never yield multiple
values because:
- we explicitly check whether the map already exists, and if so, do
nothing (so our "append" will always be to a file that does not
exist)
- even if we were to try mapping twice, the process to do so is
deterministic. I.e., we'd always end up with the same ancestor for a
given sha1. So warning about it would be pointless; there is no
ambiguity.
So swap out the warning code for a BUG (which we'll simplify further in
the next commit). And let's stop using the append operator to make the
ancestor-mapping code less confusing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After it has rewritten all of the commits, filter-branch will then
rewrite each of the input refs based on the resulting map of old/new
commits. But we don't have any explicit test coverage of this code.
Let's make sure we are covering each of those cases:
- deleting a ref when all of its commits were pruned
- rewriting a ref based on the mapping (this happens throughout the
script, but let's make sure we generate the correct messages)
- rewriting a ref whose tip was excluded, in which case we rewrite to
the nearest ancestor. Note in this case that we still insist that no
"warning" line is present (even though it looks like we'd trigger
the "... was rewritten into multiple commits" one). See the next
commit for more details.
Note these all pass currently, but the latter two will fail when run
with GIT_TEST_DEFAULT_HASH=sha256.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to fsck objects received across multiple packs during a
single git fetch session has been broken when the packfile URI
feature was in use. A workaround has been added by disabling the
codepath to avoid keeping a packfile that is too small.
* jt/transfer-fsck-across-packs-fix:
fetch-pack: do not mix --pack_header and packfile uri
Clang no longer produces a libFuzzer.a. Instead, you can include
libFuzzer by using -fsanitize=fuzzer. Therefore we should use that in
the example command for building fuzzers.
We also add -fsanitize=fuzzer-no-link to the CFLAGS to ensure that all
the required instrumentation is added when compiling git [1], and remove
-fsanitize-coverage=trace-pc-guard as it is deprecated.
I happen to have tested with LLVM 11 - however -fsanitize=fuzzer appears
to work in a wide range of reasonably modern clangs.
(On my system: what used to be libFuzzer.a now lives under the following
path, which is tricky albeit not impossible for a novice such as myself
to find:
/usr/lib64/clang/11.0.0/lib/linux/libclang_rt.fuzzer-x86_64.a )
[1] https://releases.llvm.org/11.0.0/docs/LibFuzzer.html#fuzzer-usage
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass the number of elements first and ther size second, as expected
by xcalloc(). Provide a semantic patch, which was actually used to
generate the rest of this patch.
The semantic patch would generate flip-flop diffs if both arguments
are sizeofs. We don't have such a case, and it's hard to imagine
the usefulness of such an allocation. If it ever occurs then we
could deal with it by duplicating the rule in the semantic patch to
make it cancel itself out, or we could change the code to use
CALLOC_ARRAY.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching (as opposed to cloning) from a repository with packfile
URIs enabled, an error like this may occur:
fatal: pack has bad object at offset 12: unknown object type 5
fatal: finish_http_pack_request gave result -1
fatal: fetch-pack: expected keep then TAB at start of http-fetch output
This bug was introduced in b664e9ffa1 ("fetch-pack: with packfile URIs,
use index-pack arg", 2021-02-22), when the index-pack args used when
processing the inline packfile of a fetch response and when processing
packfile URIs were unified.
This bug happens because fetch, by default, partially reads (and
consumes) the header of the inline packfile to determine if it should
store the downloaded objects as a packfile or loose objects, and thus
passes --pack_header=<...> to index-pack to inform it that some bytes
are missing. However, when it subsequently fetches the additional
packfiles linked by URIs, it reuses the same index-pack arguments, thus
wrongly passing --index-pack-arg=--pack_header=<...> when no bytes are
missing.
This does not happen when cloning because "git clone" always passes
do_keep, which instructs the fetch mechanism to always retain the
packfile, eliminating the need to read the header.
There are a few ways to fix this, including filtering out pack_header
arguments when downloading the additional packfiles, but I decided to
stick to always using index-pack throughout when packfile URIs are
present - thus, Git no longer needs to read the bytes, and no longer
needs --pack_header here.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit teaches `git stash show --include-untracked`. It
may be desirable for a user to be able to always enable the
--include-untracked behavior. Teach the stash.showIncludeUntracked
config option which allows users to do this in a similar manner to
stash.showPatch.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stash entries can be made with untracked files via
`git stash push --include-untracked`. However, because the untracked
files are stored in the third parent of the stash entry and not the
stash entry itself, running `git stash show` does not include the
untracked files as part of the diff.
With --include-untracked, untracked paths, which are recorded in the
third-parent if it exists, are shown in addition to the paths that have
modifications between the stash base and the working tree in the stash.
It is possible to manually craft a malformed stash entry where duplicate
untracked files in the stash entry will mask tracked files. We detect
and error out in that case via a custom unpack_trees() callback:
stash_worktree_untracked_merge().
Also, teach stash the --only-untracked option which only shows the
untracked files of a stash entry. This is similar to `git show stash^3`
but it is nice to provide a convenient abstraction for it so that users
do not have to think about the underlying implementation.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment in this block is meant to indicate that passing '--all',
'--reflog', and so on aren't necessary when repacking with the
'--geometric' option.
But, it has two problems: first, it is factually incorrect ('--all' is
*not* incompatible with '--stdin-packs' as the comment suggests);
second, it is quite focused on the geometric case for a block that is
guarding against it.
Reword this comment to address both issues.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a number of places in the geometric repack code where we
multiply the number of objects in a pack by another unsigned value. We
trust that the number of objects in a pack is always representable by a
uint32_t, but we don't necessarily trust that that number can be
multiplied without overflow.
Sprinkle some unsigned_add_overflows() and unsigned_mult_overflows() in
split_pack_geometry() to check that we never overflow any unsigned types
when adding or multiplying them.
Arguably these checks are a little too conservative, and certainly they
do not help the readability of this function. But they are serving a
useful purpose, so I think they are worthwhile overall.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To determine the where to place the split when repacking with the
'--geometric' option, split_pack_geometry() assigns the "split" variable
and then decrements it in a loop.
It would be equivalent (and more readable) to assign the split to the
loop position after exiting the loop, so do that instead.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't currently have a test that demonstrates the non-idempotent
behavior of 'git repack --geometric' with loose objects, so add one here
to make sure we don't regress in this area.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 0fabafd0b9 (builtin/repack.c: add '--geometric' option, 2021-02-22),
the 'git repack --geometric' code aborts early when there is zero or one
pack.
When there are no packs, this code does the right thing by placing the
split at "0". But when there is exactly one pack, the split is placed at
"1", which means that "git repack --geometric" (with any factor)
repacks all of the objects in a single pack.
This is wasteful, and the remaining code in split_pack_geometry() does
the right thing (not repacking the objects in a single pack) even when
only one pack is present.
Loosen the guard to only stop when there aren't any packs, and let the
rest of the code do the right thing. Add a test to ensure that this is
the case.
Noticed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were some early changes in the 2.31 cycle to optimize some setup
in diffcore-rename.c[1], some later changes to measure performance[2],
and finally some significant changes to improve rename detection
performance. The final one was merged with the note
Performance optimization work on the rename detection continues.
That works for the commit log, but feels misleading as a release note
since all the changes were within one cycle. Simplify this to just
Performance improvements for rename detection.
The former wording could be seen as hinting that more performance
improvements will come in 2.32, which is true, but we can just cover
those in the 2.32 release notes when the time comes.
[1] a5ac31b5b1 (Merge branch 'en/diffcore-rename', 2021-01-25)
[2] d3a035b055 (Merge branch 'en/merge-ort-perf', 2021-02-11)
[3] 12bd17521c (Merge branch 'en/diffcore-rename', 2021-03-01)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Work around platforms whose open() is reported to return EINTR (it
shouldn't, as we do our signals with SA_RESTART).
* jk/open-returns-eintr:
config.mak.uname: enable OPEN_RETURNS_EINTR for macOS Big Sur
Makefile: add OPEN_RETURNS_EINTR knob
* 'master' of github.com:git/git: (63 commits)
Git 2.31-rc1
Hopefully the last batch before -rc1
Revert "commit-graph: when incompatible with graphs, indicate why"
read-cache: make the index write buffer size 128K
dir: fix malloc of root untracked_cache_dir
commit-graph.c: display correct number of chunks when writing
doc/reftable: document how to handle windows
fetch-pack: print and use dangling .gitmodules
fetch-pack: with packfile URIs, use index-pack arg
http-fetch: allow custom index-pack args
http: allow custom index-pack args
chunk-format: add technical docs
chunk-format: restore duplicate chunk checks
midx: use 64-bit multiplication for chunk sizes
midx: use chunk-format read API
commit-graph: use chunk-format read API
chunk-format: create read chunk API
midx: use chunk-format API in write_midx_internal()
midx: drop chunk progress during write
midx: return success/failure in chunk write methods
...
This commit causes breakage on macOS, or in fact any platform using
older versions of Tcl. Revert it.
* py/revert-commit-comments:
Revert "git-gui: remove lines starting with the comment character"
This reverts commit b9a43869c9.
This commit causes breakage on macOS (10.13). It causes errors on
startup and completely breaks the commit functionality. There are two
main problems. First, it uses `string cat` which is not supported on
older Tcl versions. Second, it does a half close of the bidirectional
pipe to git-stripspace which is also not supported on older Tcl
versions.
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
Although `test -f` has the same functionality as test_path_is_file(), in
the case where test_path_is_file() fails, we get much better debugging
information.
Replace `test -f` with test_path_is_file so that future developers
will have a better experience debugging these test cases.
Signed-off-by: Shubham Verma <shubhunic@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following sequence, on a case-insensitive file system,
(strictly speeking with core.ignorecase=true)
leads to an assertion failure and leaves .git/index.lock behind.
git init
echo foo >foo
git add foo
git mv foo FOO
git mv foo bar
This regression was introduced in Commit 9b906af657,
"git-mv: improve error message for conflicted file"
The bugfix is to change the "file exist case-insensitive in the index"
into the correct "file exist (case-sensitive) in the index".
This avoids the "assert" later in the code and keeps setting up the
"ce" pointer for ce_stage(ce) done in the next else if.
This fixes
https://github.com/git-for-windows/git/issues/2920
Reported-By: Dan Moseley <Dan.Moseley@microsoft.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of the hash-transition, git can operate on more than just SHA-1
repositories. Replace "sha1"-specific documentation with hash-agnostic
terminology.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In modern documentation, args, placeholders and filenames are
monospaced. Apply monospace formatting to these objects.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Raise the buffer size used when writing the index file out from
(obviously too small) 8kB to (clearly sufficiently large) 128kB.
* ns/raise-write-index-buffer-size:
read-cache: make the index write buffer size 128K
The logic to handle "trailer" related placeholders in the
"--format=" mechanisms in the "log" family and "for-each-ref"
family is getting unified.
* hv/trailer-formatting:
ref-filter: use pretty.c logic for trailers
pretty.c: capture invalid trailer argument
pretty.c: refactor trailer logic to `format_set_trailers_options()`
t6300: use function to test trailer options
Test script modernization.
* sv/t7001-modernize:
t7001: use `test` rather than `[`
t7001: use here-docs instead of echo
t7001: put each command on a separate line
t7001: use '>' rather than 'touch'
t7001: avoid using `cd` outside of subshells
t7001: remove whitespace after redirect operators
t7001: modernize subshell formatting
t7001: remove unnecessary blank lines
t7001: indent with TABs instead of spaces
t7001: modernize test formatting
The approach to "fsck" the incoming objects in "index-pack" is
attractive for performance reasons (we have them already in core,
inflated and ready to be inspected), but fundamentally cannot be
applied fully when we receive more than one pack stream, as a tree
object in one pack may refer to a blob object in another pack as
".gitmodules", when we want to inspect blobs that are used as
".gitmodules" file, for example. Teach "index-pack" to emit
objects that must be inspected later and check them in the calling
"fetch-pack" process.
* jt/transfer-fsck-across-packs:
fetch-pack: print and use dangling .gitmodules
fetch-pack: with packfile URIs, use index-pack arg
http-fetch: allow custom index-pack args
http: allow custom index-pack args
The common code to deal with "chunked file format" that is shared
by the multi-pack-index and commit-graph files have been factored
out, to help codepaths for both filetypes to become more robust.
* ds/chunked-file-api:
commit-graph.c: display correct number of chunks when writing
chunk-format: add technical docs
chunk-format: restore duplicate chunk checks
midx: use 64-bit multiplication for chunk sizes
midx: use chunk-format read API
commit-graph: use chunk-format read API
chunk-format: create read chunk API
midx: use chunk-format API in write_midx_internal()
midx: drop chunk progress during write
midx: return success/failure in chunk write methods
midx: add num_large_offsets to write_midx_context
midx: add pack_perm to write_midx_context
midx: add entries to write_midx_context
midx: use context in write_midx_pack_names()
midx: rename pack_info to write_midx_context
commit-graph: use chunk-format write API
chunk-format: create chunk format write API
commit-graph: anonymize data in chunk_write_fn
Performance optimization work on the rename detection continues.
* en/diffcore-rename:
merge-ort: call diffcore_rename() directly
gitdiffcore doc: mention new preliminary step for rename detection
diffcore-rename: guide inexact rename detection based on basenames
diffcore-rename: complete find_basename_matches()
diffcore-rename: compute basenames of source and dest candidates
t4001: add a test comparing basename similarity and content similarity
diffcore-rename: filter rename_src list when possible
diffcore-rename: no point trying to find a match better than exact
Preliminary changes to fsmonitor integration.
* jh/fsmonitor-prework:
fsmonitor: refactor initialization of fsmonitor_last_update token
fsmonitor: allow all entries for a folder to be invalidated
fsmonitor: log FSMN token when reading and writing the index
fsmonitor: log invocation of FSMonitor hook to trace2
read-cache: log the number of scanned files to trace2
read-cache: log the number of lstat calls to trace2
preload-index: log the number of lstat calls to trace2
p7519: add trace logging during perf test
p7519: move watchman cleanup earlier in the test
p7519: fix watchman watch-list test on Windows
p7519: do not rely on "xargs -d" in test
Each %(describe) placeholder is expanded using a separate git describe
call. Their outputs depend on the tags present at the time, so there's
no consistency guarantee. Document that fact.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that the test is covering both describable and
undescribable commits.
Suggested-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit c85eec7fc3, as
it is a bit overzealous, we are in prerelease freeze, and we want
to have enough time to get this right and cook in 'next'.
cf. <8735xgkvuo.fsf@evledraar.gmail.com>
We've had mixed reports on whether the latest release of macOS needs
this Makefile knob set. In most reported cases, there's antivirus
software running (which one might imagine could cause an open() call to
be delayed). However, one of the (off-list) reports I've gotten
indicated that it happened on an otherwise clean install of Big Sur.
Since the symptom is so bad (checkout randomly fails to write several
fails when the progress meter kicks in), and since the workaround is so
lightweight (if we don't see EINTR, it's just an extra conditional
check), let's just turn it on by default.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reference-transaction hook doesn't clearly document its scope and
what values it receives as input. Document it to make it less surprising
and clearly delimit its (current) scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The githooks(5) documentation states in several places that the hook
will receive a SHA-1 or hashes of 40 characters length. Given that we're
transitioning to a world where both SHA-1 and SHA-256 are supported,
this is inaccurate.
Fix the issue by replacing mentions of SHA-1 with "object name" and not
explicitly mentioning the hash size.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
dir_rename_counts has a mapping of a mapping, in particular, it has
old_dir => { new_dir => count }
We want a simple mapping of
old_dir => new_dir
based on which new_dir had the highest count for a given old_dir.
Compute this and store it in dir_rename_guess.
This is the final piece of the puzzle needed to make our guesses at
which directory files have been moved to when basenames aren't unique.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 12.775 s ± 0.062 s 12.596 s ± 0.061 s
mega-renames: 188.754 s ± 0.284 s 130.465 s ± 0.259 s
just-one-mega: 5.599 s ± 0.019 s 3.958 s ± 0.010 s
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are using dir_rename_counts to count the number of other directories
that files within a directory moved to. We only need this information
for directories that disappeared, though, so we can return early from
update_dir_rename_counts() for other paths.
If dirs_removed is passed to diffcore_rename_extended(), then it
provides the relevant bits of information for us to limit this counting
to relevant dirs. If dirs_removed is not passed, we would need to
compute some replacement in order to do this limiting. Introduce a new
info->relevant_source_dirs variable for this purpose, even though at
this stage we will only set it to dirs_removed for simplicity.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Compute dir_rename_counts based just on exact renames to start, as that
can provide us useful information in find_basename_matches(). This is
done by moving the code from compute_dir_rename_counts() into
initialize_dir_rename_info(), resulting in it being computed earlier and
based just on exact renames. Since that's an incomplete result, we
augment the counts via calling update_dir_rename_counts() after each
basename-guide and inexact rename detection match is found.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When diffcore_rename_extended() is passed a NULL dir_rename_count, we
will still want to create a temporary one for use by
find_basename_matches(), but have it fully deallocated before
diffcore_rename_extended() returns. However, when
diffcore_rename_extended() is passed a dir_rename_count, we want to fill
that strmap with appropriate values and return it. However, for our
interim purposes we may also add entries corresponding to directories
that cannot have been renamed due to still existing on both sides.
Extend cleanup_dir_rename_info() to handle these two different cases,
cleaning up the relevant bits of information for each case.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This continues the migration of the directory rename detection code into
diffcore-rename, now taking the simple step of combining it with the
dir_rename_info struct. Future commits will then make dir_rename_counts
be computed in stages, and add computation of dir_rename_guess.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we adjust the usage of dir_rename_count we want to have a function
for clearing, or partially clearing it out. Add a
partial_clear_dir_rename_count() function for this purpose.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the computation of dir_rename_count from merge-ort.c to
diffcore-rename.c, making slight adjustments to the data structures
based on the move. While the diffstat looks large, viewing this commit
with --color-moved makes it clear that only about 20 lines changed.
With this patch, the computation of dir_rename_count is still only done
after inexact rename detection, but subsequent commits will add a
preliminary computation of dir_rename_count after exact rename
detection, followed by some updates after inexact rename detection.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Compute a mapping of full filename to the index within rename_dst where
that filename is found, and store it in idx_map. idx_possible_rename()
needs this to quickly finding an array entry in rename_dst given the
pathname.
While at it, add placeholder initializations for dir_rename_count and
dir_rename_guess; these will be more fully populated in subsequent
commits.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new struct dir_rename_info with various values we need inside our
idx_possible_rename() function introduced in the previous commit. Add a
basic implementation for this function showing how we plan to use the
variables, but which will just return early with a value of -1 (not
found) when those variables are not set up.
Future commits will do the work necessary to set up those other
variables so that idx_possible_rename() does not always return -1.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous commit noted that it is very common for people to move files
across directories while keeping their filename the same. The last few
commits took advantage of this and showed that we can accelerate rename
detection significantly using basenames; since files with the same
basename serve as likely rename candidates, we can check those first and
remove them from the rename candidate pool if they are sufficiently
similar.
Unfortunately, the previous optimization was limited by the fact that
the remaining basenames after exact rename detection are not always
unique. Many repositories have hundreds of build files with the same
name (e.g. Makefile, .gitignore, build.gradle, etc.), and may even have
hundreds of source files with the same name. (For example, the linux
kernel has 100 setup.c, 87 irq.c, and 112 core.c files. A repository at
$DAYJOB has a lot of ObjectFactory.java and Plugin.java files).
For these files with non-unique basenames, we are faced with the task of
attempting to determine or guess which directory they may have been
relocated to. Such a task is precisely the job of directory rename
detection. However, there are two catches: (1) the directory rename
detection code has traditionally been part of the merge machinery rather
than diffcore-rename.c, and (2) directory rename detection currently
runs after regular rename detection is complete. The 1st catch is just
an implementation issue that can be overcome by some code shuffling.
The 2nd requires us to add a further approximation: we only have access
to exact renames at this point, so we need to do directory rename
detection based on just exact renames. In some cases we won't have
exact renames, in which case this extra optimization won't apply. We
also choose to not apply the optimization unless we know that the
underlying directory was removed, which will require extra data to be
passed in to diffcore_rename_extended(). Also, even if we get a
prediction about which directory a file may have relocated to, we will
still need to check to see if there is a file in the predicted
directory, and then compare the two files to see if they meet the higher
min_basename_score threshold required for marking the two files as
renames.
This commit introduces an idx_possible_rename() function which will
do this directory rename detection for us and give us the index within
rename_dst of the resulting filename. For now, this function is
hardcoded to return -1 (not found) and just hooks up how its results
would be used once we have a more complete implementation in place.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When opening a reverse index, load_revindex_from_disk() jumps to the
'cleanup' label in case something goes wrong: the reverse index had the
wrong size, an unrecognized version, or similar.
It also jumps to this label when the reverse index couldn't be opened in
the first place, which will cause an error with the unguarded close()
call in the label.
Guard this call with "if (fd >= 0)" to make sure that we have a valid
file descriptor to close before attempting to close it.
Reported-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running the perf suite, we copy files from an existing $GIT_DIR to
a scratch repository to give us a realistic setup on which to operate.
Since the perf scripts themselves may modify the scratch repository, we
want to make sure we've scrubbed any references back to the original.
One existing example is that we avoid copying the file "commondir" at
the top-level of the repository. In a worktree git-dir (e.g.,
.git/worktrees/foo), that file contains the path to the parent
repository; copying it could mean ref updates in the scratch repository
affect the original.
But there are other files we should cover, too:
- "gitdir" in a worktree git-dir contains the path to the actual .git
file in the working tree. We _shouldn't_ end up looking at it at
all, since the lack of a "commondir" file means Git won't consider
this to be a worktree git-dir. But it's best to err on the safe
side.
- in a parent repository that contains worktrees, the
"$GIT_DIR/worktrees" directory will contain the git dirs for the
individual worktrees. Which will themselves contain commondir and
gitdir files that may reference the original repository. We should
likewise remove them.
Note that this does mean that the perf suite's scratch repositories
will never have any worktrees. That's OK; we don't have any perf tests
that are influenced by their presence. If we add any, they'd
probably want to create the worktrees themselves anyway.
This patch adds both paths to the set of omissions in
test_perf_copy_repo_contents(). Note that we won't get confused here by
matching arbitrary names like refs/heads/commondir. This list is always
matching top-level entries in $GIT_DIR (we rely on "cp -R" to do the
actual recursion).
Suggested-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The perf suite gets confused when test_perf_default_repo is pointed at a
worktree (which includes when it is run from within a worktree at all,
since the default is to use the current repository).
Here's an example:
$ git worktree add ~/foo
Preparing worktree (new branch 'foo')
HEAD is now at 328c109303 The eighth batch
$ cd ~/foo
$ make
[...build output...]
$ cd t/perf
$ ./p0000-perf-lib-sanity.sh -v -i
[...]
perf 1 - test_perf_default_repo works:
running:
foo=$(git rev-parse HEAD) &&
test_export foo
fatal: ambiguous argument 'HEAD': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
The problem is that we didn't copy all of the necessary files from the
source repository (in this case we got HEAD, but we have no refs!). We
discover the git-dir with "rev-parse --git-dir", but this points to the
worktree's partial repository in .../.git/worktrees/foo.
That partial repository has a "commondir" file which points to the main
repository, where the actual refs are stored, but we don't copy it. This
is the correct thing to do, though! If we did copy it, then our scratch
test repo would be pointing back to the original main repo, and any ref
updates we made in the tests would impact that original repo.
Instead, we need to either:
1. Make a scratch copy of the original main repo (in addition to the
worktree repo), and point the scratch worktree repo's commondir at
it. This preserves the original relationship, but it's doubtful any
script really cares (if they are testing worktree performance,
they'd probably make their own worktrees). And it's trickier to get
right.
2. Collapse the main and worktree repos into a single scratch repo.
This can be done by copying everything from both, preferring any
files from the worktree repo.
This patch does the second one. With this applied, the example above
results in p0000 running successfully.
Reported-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some platforms, open() reportedly returns EINTR when opening regular
files and we receive a signal (usually SIGALRM from our progress meter).
This shouldn't happen, as open() should be a restartable syscall, and we
specify SA_RESTART when setting up the alarm handler. So it may actually
be a kernel or libc bug for this to happen. But it has been reported on
at least one version of Linux (on a network filesystem):
https://lore.kernel.org/git/c8061cce-71e4-17bd-a56a-a5fed93804da@neanderfunk.de/
as well as on macOS starting with Big Sur even on a regular filesystem.
We can work around it by retrying open() calls that get EINTR, just as
we do for read(), etc. Since we don't ever _want_ to interrupt an open()
call, we can get away with just redefining open, rather than insisting
all callsites use xopen().
We actually do have an xopen() wrapper already (and it even does this
retry, though there's no indication of it being an observed problem back
then; it seems simply to have been lifted from xread(), etc). But it is
used hardly anywhere, and isn't suitable for general use because it will
die() on error. In theory we could combine the two, but it's awkward to
do so because of the variable-args interface of open().
This patch adds a Makefile knob for enabling the workaround. It's not
enabled by default for any platforms in config.mak.uname yet, as we
don't have enough data to decide how common this is (I have not been
able to reproduce on either Linux or Big Sur myself). It may be worth
enabling preemptively anyway, since the cost is pretty low (if we don't
see an EINTR, it's just an extra conditional).
However, note that we must not enable this on Windows. It doesn't do
anything there, and the macro overrides the existing mingw_open()
redirection. I've added a preemptive #undef here in the mingw header
(which is processed first) to just quietly disable it (we could also
make it an #error, but there is little point in being so aggressive).
Reported-by: Aleksey Kliger <alklig@microsoft.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gitattributes documentation mentions that either the clean cmd or
the smudge cmd can be left unspecified in a filter definition. However,
when the filter is marked as 'required', the absence of any one of these
two should be treated as an error. Git already fails under these
circumstances, but not always in a pleasant way: omitting a clean cmd in
a required filter triggers an assertion error which leaves the user with
a quite verbose message:
git: convert.c:1459: convert_to_git_filter_fd: Assertion "ca.drv->clean || ca.drv->process" failed.
This assertion is not really necessary, as the apply_filter() call below
it already performs the same check. And when this condition is not met,
the function returns 0, making the caller die() with a much nicer
message. (Also note that die()-ing here is the right behavior as
`would_convert_to_git_filter_fd() == true` is a precondition to use
convert_to_git_filter_fd(), and the former is only true when the filter
is required.) So remove the assertion and add two regression tests to
make sure that git fails nicely when either the smudge or clean command
is missing on a required filter.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push $there --delete ''" should have been diagnosed as an
error, but instead turned into a matching push, which has been
corrected.
* jc/push-delete-nothing:
push: do not turn --delete '' into a matching push
A handful of multi-word configuration variable names in
documentation that are spelled in all lowercase have been corrected
to use the more canonical camelCase.
* dl/doc-config-camelcase:
index-format doc: camelCase core.excludesFile
blame-options.txt: camelcase blame.blankBoundary
i18n.txt: camel case and monospace "i18n.commitEncoding"
The "git maintenance register" command had trouble registering bare
repositories, which had been corrected.
* es/maintenance-of-bare-repositories:
maintenance: fix incorrect `maintenance.repo` path with bare repository
Various fixes on "git add --chmod".
* mt/add-chmod-fixes:
add: propagate --chmod errors to exit status
add: mark --chmod error string for translation
add --chmod: don't update index when --dry-run is used
The code to implement "git merge-base --independent" was poorly
done and was kept from the very beginning of the feature.
* ds/merge-base-independent:
commit-reach: stale commits may prune generation further
commit-reach: use heuristic in remove_redundant()
commit-reach: move compare_commits_by_gen
commit-reach: use one walk in remove_redundant()
commit-reach: reduce requirements for remove_redundant()
"git rebase --[no-]fork-point" gained a configuration variable
rebase.forkPoint so that users do not have to keep specifying a
non-default setting.
* ah/rebase-no-fork-point-config:
rebase: add a config option for --no-fork-point
"git grep" has been tweaked to be limited to the sparse checkout
paths.
* mt/grep-sparse-checkout:
grep: honor sparse-checkout on working tree searches
"git difftool" learned "--skip-to=<path>" option to restart an
interrupted session from an arbitrary path.
* zh/difftool-skip-to:
difftool.c: learn a new way start at specified file
"git {diff,log} --{skip,rotate}-to=<path>" allows the user to
discard diff output for early paths or move them to the end of the
output.
* jc/diffcore-rotate:
diff: --{rotate,skip}-to=<path>
The error codepath around the "--temp/--prefix" feature of "git
checkout-index" has been improved.
* mt/checkout-index-corner-cases:
checkout-index: omit entries with no tempname from --temp output
write_entry(): fix misuses of `path` in error messages
Objects that lost references can be pruned away, even when they
have notes attached to it (and these notes will become dangling,
which in turn can be pruned with "git notes prune"). This has been
clarified in the documentation.
* mz/doc-notes-are-not-anchors:
docs: clarify that refs/notes/ do not keep the attached objects alive
Removal of GIT_TEST_GETTEXT_POISON continues.
* ab/detox-gettext-tests:
tests: remove most uses of test_i18ncmp
tests: remove last uses of C_LOCALE_OUTPUT
tests: remove most uses of C_LOCALE_OUTPUT
tests: remove last uses of GIT_TEST_GETTEXT_POISON=false
We have two established generation number versions:
1: topological levels
2: corrected commit dates
The corrected commit dates are enabled by default, but they also write
extra data in the GDAT and GDOV chunks. Services that host Git data
might want to have more control over when this feature rolls out than
just updating the Git binaries.
Add a new "commitGraph.generationVersion" config option that specifies
the intended generation number version. If this value is less than 2,
then the GDAT chunk is never written _or read_ from an existing file.
This can replace our use of the GIT_TEST_COMMIT_GRAPH_NO_GDAT
environment variable in the test suite. Remove it.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() method uses 'the_repository' in a few places. A
new need for a repository pointer is coming in the following change, so
group these instances into a local variable 'r' that could eventually
become part of the method signature, if so desired.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a remote is renamed don't change the canonical "*.pushRemote"
form to "*.pushremote". Fixes and tests for a minor bug in
923d4a5ca4 (remote rename/remove: handle branch.<name>.pushRemote
config values, 2020-01-27). See the preceding commit for why this does
& doesn't matter.
While we're at it let's also test that we handle the "*.pushDefault"
key correctly. The code to handle that was added in
b3fd6cbf29 (remote rename/remove: gently handle remote.pushDefault
config, 2020-02-01) and does the right thing, but nothing tested that
we wrote out the canonical camel-cased form.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change "git remote add" so that it adds a *.tagOpt key, and not the
lower-cased *.tagopt on "git remote add --no-tags", just as "git clone
--no-tags" would do.
This doesn't matter for anything that reads the config. It's just
prettier if we write config keys in their documented camelCase form to
user-readable config files.
When I added support for "clone -no-tags" in 0dab2468ee (clone: add a
--no-tags option to clone without tags, 2017-04-26) I made it use
the *.tagOpt form, but the older "git remote add" added in
111fb85865 (remote add: add a --[no-]tags option, 2010-04-20) has
been using *.tagopt all this time.
It's easy enough to add a test for this, so let's do that. We can't
use "git config -l" there, because it'll normalize the keys to their
lower-cased form. Let's add the test for "git clone" too for good
measure, not just to the "git remote" codepath we're fixing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ds/chunked-file-api:
commit-graph.c: display correct number of chunks when writing
chunk-format: add technical docs
chunk-format: restore duplicate chunk checks
midx: use 64-bit multiplication for chunk sizes
midx: use chunk-format read API
commit-graph: use chunk-format read API
chunk-format: create read chunk API
midx: use chunk-format API in write_midx_internal()
midx: drop chunk progress during write
midx: return success/failure in chunk write methods
midx: add num_large_offsets to write_midx_context
midx: add pack_perm to write_midx_context
midx: add entries to write_midx_context
midx: use context in write_midx_pack_names()
midx: rename pack_info to write_midx_context
commit-graph: use chunk-format write API
chunk-format: create chunk format write API
commit-graph: anonymize data in chunk_write_fn
All other references to blame.* configuration variables are
camelCased already. Update this one to match.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 95791be750 (doc: camelCase the i18n config variables to improve
readability, 2017-07-17), the other i18n config variables were
camel cased. However, this one instance was missed.
Camel case and monospace "i18n.commitEncoding" so that it matches the
surrounding text.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
[jc: fixed 3 other mistakes that are exactly the same]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Writing an index 8K at a time invokes the OS filesystem and caching code
very frequently, introducing noticeable overhead while writing large
indexes. When experimenting with different write buffer sizes on Windows
writing the Windows OS repo index (260MB), most of the benefit came by
bumping the index write buffer size to 64K. I picked 128K to ensure that
we're past the knee of the curve.
With this change, the time under do_write_index for an index with 3M
files goes from ~1.02s to ~0.72s.
Signed-off-by: Neeraj Singh <neerajsi@ntdev.microsoft.com>
Acked-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If `add` encounters an error while applying the --chmod changes, it
prints a message to stderr, but exits with a success code. This might
have been an oversight, as the command does exit with a non-zero code in
other situations where it cannot (or refuses to) update all of the
requested paths (e.g. when some of the given paths are ignored). So make
the exit behavior more consistent by also propagating --chmod errors to
the exit status.
Note: the test "all statuses changed in folder if . is given" uses paths
added by previous test cases, some of which might be symbolic links.
Because `git add --chmod` will now fail with such paths, this test would
depend on whether all the previous tests were executed, or only some
of them. Avoid that by running the test on a fresh repo with only
regular files.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This error message is intended for humans, so mark it for translation.
Also use error() instead of fprintf(stderr, ...), to make the
corresponding line a bit cleaner, and to display the "error:" prefix,
which helps classifying the nature/severity of the message.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git add --chmod` applies the mode changes even when `--dry-run` is
used. Fix that and add some tests for this option combination.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use FLEX_ALLOC_STR() to allocate the `struct untracked_cache_dir`
for the root directory. Get rid of unsafe code that might fail to
initialize the `name` field (if FLEX_ARRAY is not 1). This will
make it clear that we intend to have a structure with an empty
string following it.
A problem was observed on Windows where the length of the memset() was
too short, so the first byte of the name field was not zeroed. This
resulted in the name field having garbage from a previous use of that
area of memory.
The record for the root directory was then written to the untracked-cache
extension in the index. This garbage would then be visible to future
commands when they reloaded the untracked-cache extension.
Since the directory record for the root directory had garbage in the
`name` field, the `t/helper/test-tool dump-untracked-cache` tool
printed this garbage as the path prefix (rather than '/') for each
directory in the untracked cache as it recursed.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users (myself included) would prefer to have this feature off by
default because it can silently drop commits.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a commit-graph, a progress meter is shown which indicates
the number of pieces of data to write (one per commit in each chunk).
In 47410aa837 (commit-graph: use chunk-format write API, 2021-02-18),
the number of chunks became tracked by the new chunk-format API. But a
stray local variable was left behind from when write_commit_graph_file()
used to keep track of the same.
Since this was no longer updated after 47410aa837, the progress meter
appeared broken:
$ git commit-graph write --reachable
Expanding reachable commits in commit graph: 837569, done.
Writing out commit graph in 3 passes: 166% (4187845/2512707), done.
Drop the local variable and rely instead on the chunk-format API to tell
us the correct number of chunks.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we added a syntax sugar "git push remote --delete <ref>" to
"git push" as a synonym to the canonical "git push remote :<ref>"
syntax at f517f1f2 (builtin-push: add --delete as syntactic sugar
for :foo, 2009-12-30), we weren't careful enough to make sure that
<ref> is not empty.
Blindly rewriting "--delete <ref>" to ":<ref>" means that an empty
string <ref> results in refspec ":", which is the syntax to ask for
"matching" push that does not delete anything.
Worse yet, if there were matching refs that can be fast-forwarded,
they would have been published prematurely, even if the user feels
that they are not ready yet to be pushed out, which would be a real
disaster.
Noticed-by: Tilman Vogel <tilman.vogel@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We describe the more strict date formats accepted by GIT_COMMITTER_DATE,
etc, but the --date option also allows the looser approxidate formats,
as well. Unfortunately we don't have a good or complete reference for
this format, but let's at least mention that it _is_ looser, and give a
few examples.
If we ever write separate, more complete date-format documentation, we
should refer to it from here.
Based-on-a-patch-by: Utku Gultopu <ugultopu@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an error message informs the user about an incorrect command
invocation, it should refer to "arguments", not "parameters".
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds yet another vimdiff/gvimdiff variant and presents conflicts as
a two-way diff between 'LOCAL' and 'REMOTE'. 'MERGED' is not opened
which deviates from the norm so usage text is echoed as a Vim message on
startup that instructs the user with how to proceed and how to abort.
Vimdiff is well-suited to two-way diffs so this is an option for a more
simple, more streamlined conflict resolution. For example: it is
difficult to communicate differences across more than two files using
only syntax highlighting; default vimdiff commands to get and put
changes between buffers do not need the user to manually specify
a source or destination buffer when only using two buffers.
Like other merge tools that directly compare 'LOCAL' with 'REMOTE', this
tool will benefit when paired with the new `mergetool.hideResolved`
setting.
Signed-off-by: Seth House <seth@eseth.com>
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows we can't delete or overwrite files opened by other processes. Here we
sketch how to handle this situation.
We propose to use a random element in the filename. It's possible to design an
alternate solution based on counters, but that would assign semantics to the
filenames that complicates implementation.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new GIT_OBJS variable, with the objects sufficient to get to a
git.o or common-main.o.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the order of the OBJECTS assignment, this makes a follow-up
change where we split it up into two variables smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the long OBJECTS line into multiple lines using the "+="
assignment we commonly use elsewhere in the Makefile when these lines
get unwieldy.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add TEST_OBJS to the list of other *_OBJS variables we reset. We had
already established this pattern when TEST_OBJS was introduced in
daa99a9172 (Makefile: make sure test helpers are rebuilt when headers
change, 2010-01-26), but it wasn't added to the list in that commit
along with the rest.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The periodic maintenance tasks configured by `git maintenance start`
invoke `git for-each-repo` to run `git maintenance run` on each path
specified by the multi-value global configuration variable
`maintenance.repo`. Because `git for-each-repo` will likely be run
outside of the repositories which require periodic maintenance, it is
mandatory that the repository paths specified by `maintenance.repo` are
absolute.
Unfortunately, however, `git maintenance register` does nothing to
ensure that the paths it assigns to `maintenance.repo` are indeed
absolute, and may in fact -- especially in the case of a bare repository
-- assign a relative path to `maintenance.repo` instead. Fix this
problem by converting all paths to absolute before assigning them to
`maintenance.repo`.
While at it, also fix `git maintenance unregister` to convert paths to
absolute, as well, in order to ensure that it can correctly remove from
`maintenance.repo` a path assigned via `git maintenance register`.
Reported-by: Clement Moyroud <clement.moyroud@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Often it is useful to both:
- have relatively few packfiles in a repository, and
- avoid having so few packfiles in a repository that we repack its
entire contents regularly
This patch implements a '--geometric=<n>' option in 'git repack'. This
allows the caller to specify that they would like each pack to be at
least a factor times as large as the previous largest pack (by object
count).
Concretely, say that a repository has 'n' packfiles, labeled P1, P2,
..., up to Pn. Each packfile has an object count equal to 'objects(Pn)'.
With a geometric factor of 'r', it should be that:
objects(Pi) > r*objects(P(i-1))
for all i in [1, n], where the packs are sorted by
objects(P1) <= objects(P2) <= ... <= objects(Pn).
Since finding a true optimal repacking is NP-hard, we approximate it
along two directions:
1. We assume that there is a cutoff of packs _before starting the
repack_ where everything to the right of that cut-off already forms
a geometric progression (or no cutoff exists and everything must be
repacked).
2. We assume that everything smaller than the cutoff count must be
repacked. This forms our base assumption, but it can also cause
even the "heavy" packs to get repacked, for e.g., if we have 6
packs containing the following number of objects:
1, 1, 1, 2, 4, 32
then we would place the cutoff between '1, 1' and '1, 2, 4, 32',
rolling up the first two packs into a pack with 2 objects. That
breaks our progression and leaves us:
2, 1, 2, 4, 32
^
(where the '^' indicates the position of our split). To restore a
progression, we move the split forward (towards larger packs)
joining each pack into our new pack until a geometric progression
is restored. Here, that looks like:
2, 1, 2, 4, 32 ~> 3, 2, 4, 32 ~> 5, 4, 32 ~> ... ~> 9, 32
^ ^ ^ ^
This has the advantage of not repacking the heavy-side of packs too
often while also only creating one new pack at a time. Another wrinkle
is that we assume that loose, indexed, and reflog'd objects are
insignificant, and lump them into any new pack that we create. This can
lead to non-idempotent results.
Suggested-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a recent patch we added a function 'find_kept_pack_entry()' to look
for an object only among kept packs.
While this function avoids doing any lookup work in non-kept packs, it
is still linear in the number of packs, since we have to traverse the
linked list of packs once per object. Let's cache a reduced version of
that list to save us time.
Note that this cache will last the lifetime of the program. We could
invalidate it on reprepare_packed_git(), but there's not much point in
being rigorous here:
- we might already fail to notice new .keep packs showing up after the
program starts. We only reprepare_packed_git() when we fail to find
an object. But adding a new pack won't cause that to happen.
Somebody repacking could add a new pack and delete an old one, but
most of the time we'd have a descriptor or mmap open to the old
pack anyway, so we might not even notice.
- in pack-objects we already cache the .keep state at startup, since
56dfeb6263 (pack-objects: compute local/ignore_pack_keep early,
2016-07-29). So this is just extending that concept further.
- we don't have to worry about any packed_git being removed; we always
keep the old structs around, even after reprepare_packed_git()
We do defensively invalidate the cache in case the set of kept packs
being asked for changes (e.g., only in-core kept packs were cached, but
suddenly the caller also wants on-disk kept packs, too). In theory we
could build all three caches and switch between them, but it's not
necessary, since this patch (and series) never changes the set of kept
packs that it wants to inspect from the cache.
So that "optimization" is more about being defensive in the face of
future changes than it is about asking for multiple kinds of kept packs
in this patch.
Here are p5303 results (as always, measured against the kernel):
Test HEAD^ HEAD
-----------------------------------------------------------------------------------------------
5303.5: repack (1) 57.34(54.66+10.88) 56.98(54.36+10.98) -0.6%
5303.6: repack with kept (1) 57.38(54.83+10.49) 57.17(54.97+10.26) -0.4%
5303.11: repack (50) 71.70(88.99+4.74) 71.62(88.48+5.08) -0.1%
5303.12: repack with kept (50) 72.58(89.61+4.78) 71.56(88.80+4.59) -1.4%
5303.17: repack (1000) 217.19(491.72+14.25) 217.31(490.82+14.53) +0.1%
5303.18: repack with kept (1000) 246.12(520.07+14.93) 217.08(490.37+15.10) -11.8%
and the --stdin-packs case, which scales a little bit better (although
not by that much even at 1,000 packs):
5303.7: repack with --stdin-packs (1) 0.00(0.00+0.00) 0.00(0.00+0.00) =
5303.13: repack with --stdin-packs (50) 3.43(11.75+0.24) 3.43(11.69+0.30) +0.0%
5303.19: repack with --stdin-packs (1000) 130.50(307.15+7.66) 125.13(301.36+8.04) -4.1%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have find_kept_pack_entry(), we don't have to manually keep
hunting through every pack to find a possible "kept" duplicate of the
object. This should be faster, assuming only a portion of your total
packs are actually kept.
Note that we have to re-order the logic a bit here; we can deal with the
disqualifying situations first (e.g., finding the object in a non-local
pack with --local), then "kept" situation(s), and then just fall back to
other "--local" conditions.
Here are the results from p5303 (measurements again taken on the
kernel):
Test HEAD^ HEAD
-----------------------------------------------------------------------------------------------
5303.5: repack (1) 57.26(54.59+10.84) 57.34(54.66+10.88) +0.1%
5303.6: repack with kept (1) 57.33(54.80+10.51) 57.38(54.83+10.49) +0.1%
5303.11: repack (50) 71.54(88.57+4.84) 71.70(88.99+4.74) +0.2%
5303.12: repack with kept (50) 85.12(102.05+4.94) 72.58(89.61+4.78) -14.7%
5303.17: repack (1000) 216.87(490.79+14.57) 217.19(491.72+14.25) +0.1%
5303.18: repack with kept (1000) 665.63(938.87+15.76) 246.12(520.07+14.93) -63.0%
and the --stdin-packs timings:
5303.7: repack with --stdin-packs (1) 0.01(0.01+0.00) 0.00(0.00+0.00) -100.0%
5303.13: repack with --stdin-packs (50) 3.53(12.07+0.24) 3.43(11.75+0.24) -2.8%
5303.19: repack with --stdin-packs (1000) 195.83(371.82+8.10) 130.50(307.15+7.66) -33.4%
So our repack with an empty .keep pack is roughly as fast as one without
a .keep pack up to 50 packs. But the --stdin-packs case scales a little
better, too.
Notably, it is faster than a repack of the same size and a kept pack. It
looks at fewer objects, of course, but the penalty for looking at many
packs isn't as costly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add two new tests to measure repack performance. Both tests split the
repository into synthetic "pushes", and then leave the remaining objects
in a big base pack.
The first new test marks an empty pack as "kept" and then passes
--honor-pack-keep to avoid including objects in it. That doesn't change
the resulting pack, but it does let us compare to the normal repack case
to see how much overhead we add to check whether objects are kept or
not.
The other test is of --stdin-packs, which gives us a sense of how that
number scales based on the number of packs we provide as input. In each
of those tests, the empty pack isn't considered, but the residual pack
(objects that were left over and not included in one of the synthetic
push packs) is marked as kept.
(Note that in the single-pack case of the --stdin-packs test, there is
nothing do since there are no non-excluded packs).
Here are some timings on a recent clone of the kernel:
5303.5: repack (1) 57.26(54.59+10.84)
5303.6: repack with kept (1) 57.33(54.80+10.51)
in the 50-pack case, things start to slow down:
5303.11: repack (50) 71.54(88.57+4.84)
5303.12: repack with kept (50) 85.12(102.05+4.94)
and by the time we hit 1,000 packs, things are substantially worse, even
though the resulting pack produced is the same:
5303.17: repack (1000) 216.87(490.79+14.57)
5303.18: repack with kept (1000) 665.63(938.87+15.76)
That's because the code paths around handling .keep files are known to
scale badly; they look in every single pack file to find each object.
Our solution to that was to notice that most repos don't have keep
files, and to make that case a fast path. But as soon as you add a
single .keep, that part of pack-objects slows down again (even if we
have fewer objects total to look at).
Likewise, the scaling is pretty extreme on --stdin-packs (but each
subsequent test is also being asked to do more work):
5303.7: repack with --stdin-packs (1) 0.01(0.01+0.00)
5303.13: repack with --stdin-packs (50) 3.53(12.07+0.24)
5303.19: repack with --stdin-packs (1000) 195.83(371.82+8.10)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are in a helper function, so the usual chain-lint doesn't notice
them. This function is still not perfect, as it has some git invocations
on the left-hand-side of the pipe, but it's primary purpose is timing,
not finding bugs or correctness issues.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an upcoming commit, 'git repack' will want to create a pack comprised
of all of the objects in some packs (the included packs) excluding any
objects in some other packs (the excluded packs).
This caller could iterate those packs themselves and feed the objects it
finds to 'git pack-objects' directly over stdin, but this approach has a
few downsides:
- It requires every caller that wants to drive 'git pack-objects' in
this way to implement pack iteration themselves. This forces the
caller to think about details like what order objects are fed to
pack-objects, which callers would likely rather not do.
- If the set of objects in included packs is large, it requires
sending a lot of data over a pipe, which is inefficient.
- The caller is forced to keep track of the excluded objects, too, and
make sure that it doesn't send any objects that appear in both
included and excluded packs.
But the biggest downside is the lack of a reachability traversal.
Because the caller passes in a list of objects directly, those objects
don't get a namehash assigned to them, which can have a negative impact
on the delta selection process, causing 'git pack-objects' to fail to
find good deltas even when they exist.
The caller could formulate a reachability traversal themselves, but the
only way to drive 'git pack-objects' in this way is to do a full
traversal, and then remove objects in the excluded packs after the
traversal is complete. This can be detrimental to callers who care
about performance, especially in repositories with many objects.
Introduce 'git pack-objects --stdin-packs' which remedies these four
concerns.
'git pack-objects --stdin-packs' expects a list of pack names on stdin,
where 'pack-xyz.pack' denotes that pack as included, and
'^pack-xyz.pack' denotes it as excluded. The resulting pack includes all
objects that are present in at least one included pack, and aren't
present in any excluded pack.
To address the delta selection problem, 'git pack-objects --stdin-packs'
works as follows. First, it assembles a list of objects that it is going
to pack, as above. Then, a reachability traversal is started, whose tips
are any commits mentioned in included packs. Upon visiting an object, we
find its corresponding object_entry in the to_pack list, and set its
namehash parameter appropriately.
To avoid the traversal visiting more objects than it needs to, the
traversal is halted upon encountering an object which can be found in an
excluded pack (by marking the excluded packs as kept in-core, and
passing --no-kept-objects=in-core to the revision machinery).
This can cause the traversal to halt early, for example if an object in
an included pack is an ancestor of ones in excluded packs. But stopping
early is OK, since filling in the namehash fields of objects in the
to_pack list is only additive (i.e., having it helps the delta selection
process, but leaving it blank doesn't impact the correctness of the
resulting pack).
Even still, it is unlikely that this hurts us much in practice, since
the 'git repack --geometric' caller (which is introduced in a later
commit) marks small packs as included, and large ones as excluded.
During ordinary use, the small packs usually represent pushes after a
large repack, and so are unlikely to be ancestors of objects that
already exist in the repository.
(I found it convenient while developing this patch to have 'git
pack-objects' report the number of objects which were visited and got
their namehash fields filled in during traversal. This is also included
in the below patch via trace2 data lines).
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future caller will want to be able to perform a reachability traversal
which terminates when visiting an object found in a kept pack. The
closest existing option is '--honor-pack-keep', but this isn't quite
what we want. Instead of halting the traversal midway through, a full
traversal is always performed, and the results are only trimmed
afterwords.
Besides needing to introduce a new flag (since culling results
post-facto can be different than halting the traversal as it's
happening), there is an additional wrinkle handling the distinction
in-core and on-disk kept packs. That is: what kinds of kept pack should
stop the traversal?
Introduce '--no-kept-objects[=<on-disk|in-core>]' to specify which kinds
of kept packs, if any, should stop a traversal. This can be useful for
callers that want to perform a reachability analysis, but want to leave
certain packs alone (for e.g., when doing a geometric repack that has
some "large" packs which are kept in-core that it wants to leave alone).
Note that this option is not guaranteed to produce exactly the set of
objects that aren't in kept packs, since it's possible the traversal
order may end up in a situation where a non-kept ancestor was "cut off"
by a kept object (at which point we would stop traversing). But, we
don't care about absolute correctness here, since this will eventually
be used as a purely additive guide in an upcoming new repack mode.
Explicitly avoid documenting this new flag, since it is only used
internally. In theory we could avoid even adding it rev-list, but being
able to spell this option out on the command-line makes some special
cases easier to test without promising to keep it behaving consistently
forever. Those tricky cases are exercised in t6114.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Future callers will want a function to fill a 'struct pack_entry' for a
given object id but _only_ from its position in any kept pack(s).
In particular, an new 'git repack' mode which ensures the resulting
packs form a geometric progress by object count will mark packs that it
does not want to repack as "kept in-core", and it will want to halt a
reachability traversal as soon as it visits an object in any of the kept
packs. But, it does not want to halt the traversal at non-kept, or
.keep packs.
The obvious alternative is 'find_pack_entry()', but this doesn't quite
suffice since it only returns the first pack it finds, which may or may
not be kept (and the mru cache makes it unpredictable which one you'll
get if there are options).
Short of that, you could walk over all packs looking for the object in
each one, but it scales with the number of packs, which may be
prohibitive.
Introduce 'find_kept_pack_entry()', a function which is like
'find_pack_entry()', but only fills in objects in the kept packs.
Handle packs which have .keep files, as well as in-core kept packs
separately, since certain callers will want to distinguish one from the
other. (Though on-disk and in-core kept packs share the adjective
"kept", it is best to think of the two sets as independent.)
There is a gotcha when looking up objects that are duplicated in kept
and non-kept packs, particularly when the MIDX stores the non-kept
version and the caller asked for kept objects only. This could be
resolved by teaching the MIDX to resolve duplicates by always favoring
the kept pack (if one exists), but this breaks an assumption in existing
MIDXs, and so it would require a format change.
The benefit to changing the MIDX in this way is marginal, so we instead
have a more thorough check here which is explained with a comment.
Callers will be added in subsequent patches.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test framework clean-up.
* ab/test-lib:
test-lib-functions: assert correct parameter count
test-lib-functions: remove bug-inducing "diagnostics" helper param
test libs: rename "diff-lib" to "lib-diff"
t/.gitattributes: sort lines
test-lib-functions: move function to lib-bitmap.sh
test libs: rename gitweb-lib.sh to lib-gitweb.sh
test libs: rename bundle helper to "lib-bundle.sh"
test-lib-functions: remove generate_zero_bytes() wrapper
test-lib-functions: move test_set_index_version() to its user
test lib: change "error" to "BUG" as appropriate
test-lib: remove check_var_migration
A small memleak in "diff -I<regexp>" has been corrected.
* ab/diff-deferred-free:
diff: plug memory leak from regcomp() on {log,diff} -I
diff: add an API for deferred freeing
When a pager spawned by us exited, the trace log did not record its
exit status correctly, which has been corrected.
* ab/pager-exit-log:
pager: properly log pager exit code when signalled
run-command: add braces for "if" block in wait_or_whine()
pager: test for exit code with and without SIGPIPE
pager: refactor wait_for_pager() function
Update formatting and grammar of the hash transition plan
documentation, plus some updates.
* ta/hash-function-transition-doc:
doc: use https links
doc hash-function-transition: move rationale upwards
doc hash-function-transition: fix incomplete sentence
doc hash-function-transition: use upper case consistently
doc hash-function-transition: use SHA-1 and SHA-256 consistently
doc hash-function-transition: fix asciidoc output
Signed commits and tags now allow verification of objects, whose
two object names (one in SHA-1, the other in SHA-256) are both
signed.
* bc/signed-objects-with-both-hashes:
gpg-interface: remove other signature headers before verifying
ref-filter: hoist signature parsing
commit: allow parsing arbitrary buffers with headers
gpg-interface: improve interface for parsing tags
commit: ignore additional signatures when parsing signed commits
ref-filter: switch some uses of unsigned long to size_t
Documentation, code and test clean-up around "git stash".
* dl/stash-cleanup:
stash: declare ref_stash as an array
t3905: use test_cmp() to check file contents
t3905: replace test -s with test_file_not_empty
t3905: remove nested git in command substitution
t3905: move all commands into test cases
t3905: remove spaces after redirect operators
git-stash.txt: be explicit about subcommand options
write_commit_graph initialises topo_levels using init_topo_level_slab(),
next it calls compute_topological_levels() which can cause the slab to
grow, we therefore need to clear the slab again using
clear_topo_level_slab() when we're done.
First introduced in 72a2bfca (commit-graph: add a slab to store
topological levels, 2021-01-16).
LeakSanitizer output:
==1026==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x498ae9 in realloc /src/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xafbed8 in xrealloc /src/git/wrapper.c:126:8
#2 0x7966d1 in topo_level_slab_at_peek /src/git/commit-graph.c:71:1
#3 0x7965e0 in topo_level_slab_at /src/git/commit-graph.c:71:1
#4 0x78fbf5 in compute_topological_levels /src/git/commit-graph.c:1472:12
#5 0x78c5c3 in write_commit_graph /src/git/commit-graph.c:2456:2
#6 0x535c5f in graph_write /src/git/builtin/commit-graph.c:299:6
#7 0x5350ca in cmd_commit_graph /src/git/builtin/commit-graph.c:337:11
#8 0x4cddb1 in run_builtin /src/git/git.c:453:11
#9 0x4cabe2 in handle_builtin /src/git/git.c:704:3
#10 0x4cd084 in run_argv /src/git/git.c:771:4
#11 0x4ca424 in cmd_main /src/git/git.c:902:19
#12 0x707fb6 in main /src/git/common-main.c:52:11
#13 0x7fee4249383f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2083f)
Indirect leak of 524256 byte(s) in 1 object(s) allocated from:
#0 0x498942 in calloc /src/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0xafc088 in xcalloc /src/git/wrapper.c:140:8
#2 0x796870 in topo_level_slab_at_peek /src/git/commit-graph.c:71:1
#3 0x7965e0 in topo_level_slab_at /src/git/commit-graph.c:71:1
#4 0x78fbf5 in compute_topological_levels /src/git/commit-graph.c:1472:12
#5 0x78c5c3 in write_commit_graph /src/git/commit-graph.c:2456:2
#6 0x535c5f in graph_write /src/git/builtin/commit-graph.c:299:6
#7 0x5350ca in cmd_commit_graph /src/git/builtin/commit-graph.c:337:11
#8 0x4cddb1 in run_builtin /src/git/git.c:453:11
#9 0x4cabe2 in handle_builtin /src/git/git.c:704:3
#10 0x4cd084 in run_argv /src/git/git.c:771:4
#11 0x4ca424 in cmd_main /src/git/git.c:902:19
#12 0x707fb6 in main /src/git/common-main.c:52:11
#13 0x7fee4249383f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2083f)
SUMMARY: AddressSanitizer: 524264 byte(s) leaked in 2 allocation(s).
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git difftool` only allow us to select file to view in turn.
If there is a commit with many files and we exit in the middle,
we will have to traverse list again to get the file diff which
we want to see. Therefore,teach the command an option
`--skip-to=<path>` to allow the user to say that diffs for earlier
paths are not interesting (because they were already seen in an
earlier session) and start this session with the named path.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The remove_redundant_with_gen() algorithm performs a depth-first-search
to find commits in the 'array' list, starting at the parents of each
commit in 'array'. The result is that commits in 'array' are marked
STALE when they are reachable from another commit in 'array'.
This depth-first-search is fast when commits lie on or near the
first-parent history of the higher commits. The search terminates early
if all but one commit becomes marked STALE.
However, it is possible that there are two independent commits with high
generation number. In that case, the depth-first-search might languish
by searching in lower generations due to the fixed min_generation used
throughout the method.
With the expectation that commits with lower generation are expected to
become STALE more often, we can optimize further by increasing that
min_generation boundary upon discovery of the commit with minimum
generation.
We must first sort the commits in 'array' by generation. We cannot sort
'array' itself since it must preserve relative order among the returned
results (see revision.c:mark_redundant_parents() for an example).
This simplifies the initialization of min_generation, but it also allows
us to increase the new min_generation when we find the commit with
smallest generation remaining.
This requires more than two commits in order to test, so I used the
Linux kernel repository with a few commits that are slightly off of the
first-parent history. I timed the following command:
git merge-base --independent 2ecedd756908 d2360a398f0b \
1253935ad801 160bab43419e 0e2209629fec 1d0e16ac1a9e
The first two commits have similar generation and are near the v5.10
tag. Commit 160bab43419e is off of the first-parent history behind v5.5,
while the others are scattered somewhere reachable from v5.9. This is
designed to demonstrate the optimization, as that commit within v5.5
would normally cause a lot of extra commit walking.
Since remove_redundant_with_alg() is called only when at least one of
the input commits has a finite generation number, this algorithm is
tested with a commit-graph generated starting at a number of different
tags, the earliest being v5.5.
commit-graph at v5.5:
| Method | Time |
|-----------------------+-------|
| *_no_gen() | 864ms |
| *_with_gen() (before) | 858ms |
| *_with_gen() (after) | 810ms |
commit-graph at v5.7:
| Method | Time |
|-----------------------+-------|
| *_no_gen() | 625ms |
| *_with_gen() (before) | 572ms |
| *_with_gen() (after) | 517ms |
commit-graph at v5.9:
| Method | Time |
|-----------------------+-------|
| *_no_gen() | 268ms |
| *_with_gen() (before) | 224ms |
| *_with_gen() (after) | 202ms |
commit-graph at v5.10:
| Method | Time |
|-----------------------+-------|
| *_no_gen() | 72ms |
| *_with_gen() (before) | 37ms |
| *_with_gen() (after) | 9ms |
Note that these are only modest improvements for the case where the two
independent commits are not in the commit-graph (not until v5.10). All
algorithms get faster as more commits are indexed, which is not a
surprise. However, the cost of walking extra commits is more and more
prevalent in relative terms as more commits are indexed. Finally, the
last case allows us to jump to the minimum generation between the last
two commits (that are actually independent) so we greatly reduce the
cost in that case.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reachability algorithms in commit-reach.c frequently benefit from using
the first-parent history as a heuristic for satisfying reachability
queries. The most obvious example was implemented in 4fbcca4e
(commit-reach: make can_all_from_reach... linear, 2018-07-20).
Update the walk in remove_redundant() to use this same heuristic. Here,
we are walking starting at the parents of the input commits. Sort those
parents and walk from the highest generation to lower. Each time, use
the heuristic of searching the first parent history before continuing to
expand the walk.
The order in which we explore the commits matters, so update
compare_commits_by_gen to break generation number ties with commit date.
This has no effect when the commits are in a commit-graph file with
corrected commit dates computed, but it will assist when the commits are
in the region "above" the commit-graph with "infinite" generation
number. Note that we cannot shift to use
compare_commits_by_gen_then_commit_date as the method prototype is
different. We use compare_commits_by_gen for QSORT() as opposed to as a
priority function.
The important piece is to ensure we short-circuit the walk when we find
that there is a single non-redundant commit. This happens frequently
when looking for merge-bases or comparing several tags with 'git
merge-base --independent'. Use a new count 'count_still_independent' and
if that hits 1 we can stop walking.
To update 'count_still_independent' properly, we add use of the RESULT
flag on the input commits. Then we can detect when we reach one of these
commits and decrease the count. We need to remove the RESULT flag at
that moment because we might re-visit that commit when popping the
stack.
We use the STALE flag to mark parents that have been added to the new
walk_start list, but we need to clear that flag before we start walking
so those flags don't halt our depth-first-search walk.
On my copy of the Linux kernel repository, the performance of 'git
merge-base --independent <all-tags>' goes from 1.1 seconds to 0.11
seconds.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move this earlier in the file so it can be used by more methods.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current implementation of remove_redundant() uses several calls to
paint_down_to_common() to determine that commits are independent of each
other. This leads to quadratic behavior when many inputs are passed to
commands such as 'git merge-base'.
For example, in the Linux kernel repository, I tested the performance
by passing all tags:
git merge-base --independent $(git for-each-ref refs/tags --format="$(refname)")
(Note: I had to delete the tags v2.6.11-tree and v2.6.11 as they do
not point to commits.)
Here is the performance improvement introduced by this change:
Before: 16.4s
After: 1.1s
This performance improvement requires the commit-graph file to be
present. We keep the old algorithm around as remove_redundant_no_gen()
and use it when generation_numbers_enabled() is false. This is similar
to other algorithms within commit-reach.c. The new algorithm is
implemented in remove_redundant_with_gen().
The basic approach is to do one commit walk instead of many. First, scan
all commits in the list and mark their _parents_ with the STALE flag.
This flag will indicate commits that are reachable from one of the
inputs, except not including themselves. Then, walk commits until
covering all commits up to the minimum generation number pushing the
STALE flag throughout.
At the end, we need to clear the STALE bit from all of the commits
we walked. We move the non-stale commits in 'array' to the beginning of
the list, and this might overwrite stale commits. However, we store an
array of commits that started the walk, and use clear_commit_marks() on
each of those starting commits. That method will walk the reachable
commits with the STALE bit and clear them all. This makes the algorithm
safe for re-entry or for other uses of those commits after this walk.
This logic is covered by tests in t6600-test-reach.sh, so the behavior
does not change. This is tested both in the case with a commit-graph and
without.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Knowing about the core.bigFileThreshold configuration variable is
helpful when examining pack file size differences between repositories.
Add a reference to it to the manpages a user is likely to read in this
situation.
Capitalize CONFIGURATION for consistency with other pages having such a
section.
Signed-off-by: Christian Walther <cwalther@gmx.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach index-pack to print dangling .gitmodules links after its "keep" or
"pack" line instead of declaring an error, and teach fetch-pack to check
such lines printed.
This allows the tree side of the .gitmodules link to be in one packfile
and the blob side to be in another without failing the fsck check,
because it is now fetch-pack which checks such objects after all
packfiles have been downloaded and indexed (and not index-pack on an
individual packfile, as it is before this commit).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unify the index-pack arguments used when processing the inline pack and
when downloading packfiles referenced by URIs. This is done by teaching
get_pack() to also store the index-pack arguments whenever at least one
packfile URI is given, and then when processing the packfile URI(s),
using the stored arguments.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the next step in teaching fetch-pack to pass its index-pack
arguments when processing packfiles referenced by URIs.
The "--keep" in fetch-pack.c will be replaced with a full message in a
subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when fetching, packfiles referenced by URIs are run through
index-pack without any arguments other than --stdin and --keep, no
matter what arguments are used for the packfile that is inline in the
fetch response. As a preparation for ensuring that all packs (whether
inline or not) use the same index-pack arguments, teach the http
subsystem to allow custom index-pack arguments.
http-fetch has been updated to use the new API. For now, it passes
--keep alone instead of --keep with a process ID, but this is only
temporary because http-fetch itself will be taught to accept index-pack
parameters (instead of using a hardcoded constant) in a subsequent
commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use git-stripspace to remove comment lines from the commit message. Also
use it to clean up whitespace instead of rolling our own logic.
* py/commit-comments:
git-gui: remove lines starting with the comment character
f4ed0af6 (Merge branch 'nd/columns', 2012-05-03) brought in three
cut-and-pasted copies of malformatted descriptions. Let's fix them
all the same way by marking the configuration variable names up as
monospace just like the command line option `--column` is typeset.
While we are at it, correct a missing space after the full stop that
ends the sentence.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The chunk-based file format is now an API in the code, but we should
also take time to document it as a file format. Specifically, it matches
the CHUNK LOOKUP sections of the commit-graph and multi-pack-index
files, but there are some commonalities that should be grouped in this
document.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before refactoring into the chunk-format API, the commit-graph parsing
logic included checks for duplicate chunks. It is unlikely that we would
desire a chunk-based file format that allows duplicate chunk IDs in the
table of contents, so add duplicate checks into
read_table_of_contents().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calculating the sizes of certain chunks, we should use 64-bit
multiplication always. This allows us to properly predict the chunk
sizes without risk of overflow.
Other possible overflows were discovered by evaluating each
multiplication in midx.c and ensuring that at least one side of the
operator was of type size_t or off_t.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of parsing the table of contents directly, use the chunk-format
API methods read_table_of_contents() and pair_chunk(). In particular, we
can use the return value of pair_chunk() to generate an error when a
required chunk is missing.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of parsing the table of contents directly, use the chunk-format
API methods read_table_of_contents() and pair_chunk(). While the current
implementation loses the duplicate-chunk detection, that will be added
in a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the capability to read the table of contents, then pair the chunks
with necessary logic using read_chunk_fn pointers. Callers will be added
in future changes, but the typical outline will be:
1. initialize a 'struct chunkfile' with init_chunkfile(NULL).
2. call read_table_of_contents().
3. for each chunk to parse,
a. call pair_chunk() to assign a pointer with the chunk position, or
b. call read_chunk() to run a callback on the chunk start and size.
4. call free_chunkfile() to clear the 'struct chunkfile' data.
We are re-using the anonymous 'struct chunkfile' data, as it is internal
to the chunk-format API. This gives it essentially two modes: write and
read. If the same struct instance was used for both reads and writes,
then there would be failures.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The chunk-format API allows writing the table of contents and all chunks
using the anonymous 'struct chunkfile' type. We only need to convert our
local chunk logic to this API for the multi-pack-index writes to share
that logic with the commit-graph file writes.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most expensive operations in write_midx_internal() use the context
struct's progress member, and these indicate the process of the
expensive operations within the chunk writing methods. However, there is
a competing progress struct that counts the progress over all chunks.
This is not very helpful compared to the others, so drop it.
This also reduces our barriers to combining the chunk writing code with
chunk-format.c.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Historically, the chunk-writing methods in midx.c have returned the
amount of data written so the writer method could compare this with the
table of contents. This presents with some interesting issues:
1. If a chunk writing method has a bug that miscalculates the written
bytes, then we can satisfy the table of contents without actually
writing the right amount of data to the hashfile. The commit-graph
writing code checks the hashfile struct directly for a more robust
verification.
2. There is no way for a chunk writing method to gracefully fail.
Returning an int presents an opportunity to fail without a die().
3. The current pattern doesn't match chunk_write_fn type exactly, so we
cannot share code with commit-graph.c
For these reasons, convert the midx chunk writer methods to return an
'int'. Since none of them fail at the moment, they all return 0.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an effort to align write_midx_internal() with the chunk-format API,
continue to group necessary data into "struct write_midx_context". This
change collects the "uint32_t num_large_offsets" into the context. With
this new data, write_midx_large_offsets() now matches the
chunk_write_fn type.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an effort to align write_midx_internal() with the chunk-format API,
continue to group necessary data into "struct write_midx_context". This
change collects the "uint32_t *pack_perm" and large_offsets_needed bit
into the context.
Update write_midx_object_offsets() to match chunk_write_fn.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an effort to align write_midx_internal() with the chunk-format API,
continue to group necessary data into "struct write_midx_context". This
change collects the "struct pack_midx_entry *entries" list and its count
into the context.
Update write_midx_oid_fanout() and write_midx_oid_lookup() to take the
context directly, as these are easy conversions with this new data.
Only the callers of write_midx_object_offsets() and
write_midx_large_offsets() are updated here, since additional data in
the context before those methods can match chunk_write_fn.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an effort to align the write_midx_internal() to use the chunk-format
API, start converting chunk writing methods to match chunk_write_fn. The
first case is to convert write_midx_pack_names() to take "void *data".
We already have the necessary data in "struct write_midx_context", so
this conversion is rather mechanical.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an effort to streamline our chunk-based file formats, align some of
the code structure in write_midx_internal() to be similar to the
patterns in write_commit_graph_file().
Specifically, let's create a "struct write_midx_context" that can be
used as a data parameter to abstract function types.
This change only renames "struct pack_info" to "struct
write_midx_context" and the names of instances from "packs" to "ctx". In
future changes, we will expand the data inside "struct
write_midx_context" and align our chunk-writing method with the
chunk-format API.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph write logic is ready to make use of the chunk-format
write API. Each chunk write method is already in the correct prototype.
We only need to use the 'struct chunkfile' pointer and the correct API
calls.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In anticipation of combining the logic from the commit-graph and
multi-pack-index file formats, create a new chunk-format API. Use a
'struct chunkfile' pointer to keep track of data that has been
registered for writes. This struct is anonymous outside of
chunk-format.c to ensure no user attempts to interfere with the data.
The next change will use this API in commit-graph.c, but the general
approach is:
1. initialize the chunkfile with init_chunkfile(f).
2. add chunks in the intended writing order with add_chunk().
3. write any header information to the hashfile f.
4. write the chunkfile data using write_chunkfile().
5. free the chunkfile struct using free_chunkfile().
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both AsciiDoc and Asciidoctor are eager to pick up the e-mail addresses
in this document and turn them into references at the bottom of the
manpage / clickable links. We don't really need that for these dummy
addresses. Spell "@" as "@" to make them not do this. In the open
block, we can instead avoid this by indenting the contents, similar to
the earlier blocks.
Fix a backtick which should have been a single quote mark. With all the
quoting that is going on around here, this mistake trips up the parsing
and rendering quite a bit.
Before this commit, we have the same failure mode with AsciiDoc 8.6.10
and Asciidoctor 1.5.5, and this change makes both of them happy.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we write `<name>`s with the "s" tucked on to the closing backtick,
we end up rendering the backticks literally. Rephrase this sentence
slightly to render this as monospace.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment character is specified by the config variable
'core.commentchar'. Any lines starting with this character is considered
a comment and should not be included in the final commit message.
Teach git-gui to filter out lines in the commit message that start with
the comment character using git-stripspace. If the config is not set,
'#' is taken as the default. Also add a message educating users about
the comment character.
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
The error message given when a configuration variable that is
expected to have a boolean value has been improved.
* ak/config-bad-bool-error:
config: improve error message for boolean config
"git reflog expire --stale-fix" can be used to repair the reflog by
removing entries that refer to objects that have been pruned away,
but was not careful to tolerate missing objects.
* js/reflog-expire-stale-fix:
reflog expire --stale-fix: be generous about missing objects
When certain features (e.g. grafts) used in the repository are
incompatible with the use of the commit-graph, we used to silently
turned commit-graph off; we now tell the user what we are doing.
* js/commit-graph-warning:
commit-graph: when incompatible with graphs, indicate why
Test to make sure "git rev-parse one-thing one-thing" gives
the same thing twice (when one-thing is --since=X).
* ew/rev-parse-since-test:
t1500: ensure current --since= behavior remains
Avoid individual tests in t5411 from getting affected by each other
by forcing them to use separate output files during the test.
* jx/t5411-unique-filenames:
t5411: refactor check of refs using test_cmp_refs
t5411: use different out file to prevent overwriting
Fix "git fsck --name-objects" which apparently has not been used by
anybody who is motivated enough to report breakage.
* js/fsck-name-objects-fix:
fsck --name-objects: be more careful parsing generation numbers
t1450: robustify `remove_object()`
The .mailmap is documented to be read only from the root level of a
working tree, but a stray file in a bare repository also was read
by accident, which has been corrected.
* jk/mailmap-only-at-root:
mailmap: only look for .mailmap in work tree
"git grep --untracked" is meant to be "let's ALSO find in these
files on the filesystem" when looking for matches in the working
tree files, and does not make any sense if the primary search is
done against the index, or the tree objects. The "--cached" and
"--untracked" options have been marked as mutually incompatible.
* mt/grep-cached-untracked:
grep: error out if --untracked is used with --cached
"git mergetool" feeds three versions (base, local and remote) of
a conflicted path unmodified. The command learned to optionally
prepare these files with unconflicted parts already resolved.
* sh/mergetool-hideresolved:
mergetool: add per-tool support and overrides for the hideResolved flag
mergetool: break setup_tool out into separate initialization function
mergetool: add hideResolved configuration
Even though invocations of "die()" were logged to the trace2
system, "BUG()"s were not, which has been corrected.
* jt/trace2-BUG:
usage: trace2 BUG() invocations
The "git range-diff" command learned "--(left|right)-only" option
to show only one side of the compared range.
* js/range-diff-one-side-only:
range-diff: offer --left-only/--right-only options
range-diff: move the diffopt initialization down one layer
range-diff: combine all options in a single data structure
range-diff: simplify code spawning `git log`
range-diff: libify the read_patches() function again
range-diff: avoid leaking memory in two error code paths
There are other ways than ".." for a single token to denote a
"commit range", namely "<rev>^!" and "<rev>^-<n>", but "git
range-diff" did not understand them.
* js/range-diff-wo-dotdot:
range-diff(docs): explain how to specify commit ranges
range-diff/format-patch: handle commit ranges other than A..B
range-diff/format-patch: refactor check for commit range
"git clone" tries to locally check out the branch pointed at by
HEAD of the remote repository after it is done, but the protocol
did not convey the information necessary to do so when copying an
empty repository. The protocol v2 learned how to do so.
* jt/clone-unborn-head:
clone: respect remote unborn HEAD
connect, transport: encapsulate arg in struct
ls-refs: report unborn targets of symrefs
Piecemeal of rewrite of "git bisect" in C continues.
* mr/bisect-in-c-4:
bisect--helper: retire `--check-and-set-terms` subcommand
bisect--helper: reimplement `bisect_skip` shell function in C
bisect--helper: retire `--bisect-auto-next` subcommand
bisect--helper: use `res` instead of return in BISECT_RESET case option
bisect--helper: retire `--bisect-write` subcommand
bisect--helper: reimplement `bisect_replay` shell function in C
bisect--helper: reimplement `bisect_log` shell function in C
Fix incremental update of commit-graph file around corrected commit
date data.
* ds/commit-graph-genno-fix:
commit-graph: prepare commit graph
commit-graph: be extra careful about mixed generations
commit-graph: compute generations separately
commit-graph: validate layers for generation data
commit-graph: always parse before commit_graph_data_at()
commit-graph: use repo_parse_commit
The commit-graph learned to use corrected commit dates instead of
the generation number to help topological revision traversal.
* ak/corrected-commit-date:
doc: add corrected commit date info
commit-reach: use corrected commit dates in paint_down_to_common()
commit-graph: use generation v2 only if entire chain does
commit-graph: implement generation data chunk
commit-graph: implement corrected commit date
commit-graph: return 64-bit generation number
commit-graph: add a slab to store topological levels
t6600-test-reach: generalize *_three_modes
commit-graph: consolidate fill_commit_graph_info
revision: parse parent in indegree_walk_step()
commit-graph: fix regression when computing Bloom filters
Move the definitions of the pcre2_{malloc,free} functions above the
compile_pcre2_pattern() function they're used in.
Before the preceding commit they used to be needed earlier, but now we
can move them to be adjacent to the other PCREv2 functions.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the setup of the "pcre2_general_context" to happen per-thread
in compile_pcre2_pattern() instead of in grep_init().
This change brings it in line with how the rest of the pcre2_* members
in the grep_pat structure are set up.
As noted in the preceding commit the approach 513f2b0bbd (grep: make
PCRE2 aware of custom allocator, 2019-10-16) took to allocate the
pcre2_general_context seems to have been initially based on a
misunderstanding of how PCREv2 memory allocation works.
The approach of creating a global context in grep_init() is just added
complexity for almost zero gain. On my system it's 24 bytes saved
per-thread. For comparison PCREv2 will then go on to allocate at least
a kilobyte for its own thread-local state.
As noted in 6d423dd542 (grep: don't redundantly compile throwaway
patterns under threading, 2017-05-25) the grep code is intentionally
not trying to micro-optimize allocations by e.g. sharing some PCREv2
structures globally, while making others thread-local.
So let's remove this special case and make all of them thread-local
again for simplicity. With this change we could move the
pcre2_{malloc,free} functions around to live closer to their current
use. I'm not doing that here to keep this change small, that cleanup
will be done in a follow-up commit.
See also the discussion in 94da9193a6 (grep: add support for PCRE v2,
2017-06-01) about thread safety, and Johannes's comments[1] to the
effect that we should be doing what this patch is doing.
1. https://lore.kernel.org/git/nycvar.QRO.7.76.6.1908052120302.46@tvgsbejvaqbjf.bet/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continue work started in 513f2b0bbd (grep: make PCRE2 aware of custom
allocator, 2019-10-16) and make PCREv2 use our pcre2_{malloc,free}().
functions for allocation. We'll now use it for all PCREv2 allocations.
The reason 513f2b0bbd worked as a bugfix for the USE_NED_ALLOCATOR
issue is because it targeted the allocation freed via free(), as
opposed to by a pcre2_*free() function. I.e. the pcre2_maketables()
and pcre2_maketables_free() pair.
For most of the rest we continued allocating with stock malloc()
inside PCREv2 itself, but didn't segfault because we'd use its
corresponding free().
In a preceding commit of mine I changed the free() to
pcre2_maketables_free() on versions of PCREv2 10.34 and newer. So as
far as fixing the segfault goes we could revert 513f2b0bbd. But then
we wouldn't use the desired allocator, let's just use it instead.
Before this patch we'd on e.g.:
grep --threads=1 -iP æ.*var.*xyz
Only use pcre2_{malloc,free}() for 2 malloc() calls and 2
corresponding free() calls. Now it's 12 calls to each. This can be
observed with the GREP_PCRE2_DEBUG_MALLOC debug mode.
Reading the history of how this bug got introduced it wasn't present
in Johannes's original patch[1] to fix the issue.
My reading of that thread is that the approach the follow-up patches
to Johannes's original pursued were based on misunderstanding of how
the PCREv2 API works. In particular this part of [2]:
"most of the time (like when using UTF-8) the chartable (and
therefore the global context) is not needed (even when using
alternate allocators)"
That's simply not how PCREv2 memory allocation works. It's easy to see
how the misunderstanding came about. It's because (as noted above) the
issue was noticed because of our use of free() in our own grep.c for
freeing the memory allocated by pcre2_maketables().
Thus the misunderstanding that PCREv2's compile context is something
only needed for pcre2_maketables(), and e.g. an aborted earlier
attempt[3] to only set it up when we ourselves called
pcre2_maketables().
That's not what PCREv2's compile context is. To quote PCREv2's
documentation:
"This context just contains pointers to (and data for) external
memory management functions that are called from several places in
the PCRE2 library."
Thus the failed attempts to go down the route of only creating the
general context in cases where we ourselves call pcre2_maketables(),
before finally settling on the approach 513f2b0bbd took of always
creating it, but then mostly not using it.
Instead we should always create it, and then pass the general context
to those functions that accept it, so that they'll consistently use
our preferred memory allocation functions.
1. https://lore.kernel.org/git/3397e6797f872aedd18c6d795f4976e1c579514b.1565005867.git.gitgitgadget@gmail.com/
2. https://lore.kernel.org/git/CAPUEsphMh_ZqcH3M7PXC9jHTfEdQN3mhTAK2JDkdvKBp53YBoA@mail.gmail.com/
3. https://lore.kernel.org/git/20190806085014.47776-3-carenas@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make use of the pcre2_maketables_free() function to free the memory
allocated by pcre2_maketables().
At first sight it's strange that 10da030ab7 (grep: avoid leak of
chartables in PCRE2, 2019-10-16) which added the free() call here
doesn't make use of the pcre2_free() the author introduced in the
preceding commit in 513f2b0bbd (grep: make PCRE2 aware of custom
allocator, 2019-10-16).
The reason is that at the time the function didn't exist. It was first
introduced in PCREv2 version 10.34, released on 2019-11-21.
Let's make use of it behind a macro. I don't think this matters for
anything to do with custom allocators, but it makes our use of PCREv2
more discoverable.
At some distant point in the future we'll be able to drop the version
guard, as nobody will be running a version older than 10.34.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace a use of pcre2_config(PCRE2_CONFIG_VERSION, ...) which I added
in 95ca1f987e (grep/pcre2: better support invalid UTF-8 haystacks,
2021-01-24) with the same test done at compile-time.
It might be cuter to do this at runtime since we don't have to do the
"major >= 11 || (major >= 10 && ...)" test. But in the next commit
we'll add another version comparison that absolutely needs to be done
at compile-time, so we're better of being consistent across the board.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add optional printing of PCREv2 allocations to stderr for a developer
who manually changes the GREP_PCRE2_DEBUG_MALLOC definition to "1".
You need to manually change the definition in the source file similar
to the DEBUG_MAILMAP, there's no Makefile knob for this.
This will be referenced a subsequent commit, and is generally useful
to manually see what's going on with PCREv2 allocations while working
on that code.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change pcre2_malloc() in a way that'll make it easier for a debugging
fprintf() to spew out the allocated pointer.
This doesn't introduce any functional change, it just makes a
subsequent commit's diff easier to read. Changes code added in
513f2b0bbd (grep: make PCRE2 aware of custom allocator, 2019-10-16).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a redundant assignment of pcre2_compile_context dating back to
my 94da9193a6 (grep: add support for PCRE v2, 2017-06-01).
In create_grep_pat() we xcalloc() the "grep_pat" struct, so there's no
need to NULL out individual members here.
I think this was probably something left over from an earlier
development version of mine.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop an assignment added in b65abcafc7 (grep: use PCRE v2 for
optimized fixed-string search, 2019-07-01) and the overly cautious
assert() I added in 94da9193a6 (grep: add support for PCRE v2,
2017-06-01).
There was never a good reason for this, it's just a relic from when I
initially wrote the PCREv2 support. We're not going to have confusion
about compile_pcre2_pattern() being called when it shouldn't just
because we forgot to cargo-cult this opt->pcre2 option.
Furthermore the "struct grep_opt" is (mostly) used for the options the
user supplied, let's avoid the pattern of needlessly assigning to it.
With my recent removal of the PCREv1 backend in 7599730b7e (Remove
support for v1 of the PCRE library, 2021-01-24) there's even less
confusion around what we call where in these codepaths, which is one
more reason to remove this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git Protocol version 2[1] defines 0002 as a Message Packet that indicates
the end of a response for stateless connections.
Change the naming of the 0002 Packet to 'Response End' to match the
parsing introduced in Wireshark's MR !1922 for consistency. A subsequent
MR in Wireshark will address additional mismatches.
[1] kernel.org/pub/software/scm/git/docs/technical/protocol-v2.html
[2] gitlab.com/wireshark/wireshark/-/merge_requests/1922
Signed-off-by: Joey Salazar <jgsal@protonmail.com>
Reviewed-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's not immediately obvious why --disk-usage might be a useful thing.
These examples show off a few of the real-world cases I've used it for.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently don't show any examples of using git-rev-list at all. Let's
add some pretty elementary examples. They likely seem obvious to anybody
who has worked with the tool for a while, but my purpose here is
two-fold:
- they may be enlightening to people who haven't used the tool a lot
to give a general flavor of how it is meant to be used
- they can serve as a starting point for adding more interesting
examples (we can do that without the basic ones, of course, but I
think it makes sense to show off the building blocks)
This set is far from exhaustive, but again, the purpose is to be a
starting point for further additions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git-log(1) -- but not in git-shortlog(1) or git-rev-list(1) -- we
include a bonus paragraph in the description of `--first-parent`. But
we forgot to add a lone "+" for a list continuation, and we shouldn't
be indenting this second paragraph. As a result, we get a different
indentation and the `backticks` render literally.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git blame --color-by-age`, the determine_line_heat() is called to
select how to color the output based on the commit's author date. It
uses the get_commit_info() to parse the information into a `commit_info`
structure, however, this is actually unnecessary because the
determine_line_heat() caller also does the same.
Instead, let's change the determine_line_heat() to take a `commit_info`
structure and remove the internal call to get_commit_info() thus
cleaning up and optimizing the code path.
Enabling Git's trace2 API in order to record the execution time for
every call to determine_line_heat() function:
+ trace2_region_enter("blame", "determine_line_heat", the_repository);
determine_line_heat(ent, &default_color);
+ trace2_region_enter("blame", "determine_line_heat", the_repository);
Then, running `git blame` for "kernel/fork.c" in linux.git and summing
all the execution time for every call (around 1.3k calls) resulted in
2.6x faster execution (best out 3):
git built from 328c109303 (The eighth batch, 2021-02-12) = 42ms
git built from 328c109303 + this change = 16ms
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow restricting the tags used by the placeholder %(describe) with the
options match and exclude. E.g. the following command describes the
current commit using official version tags, without those for release
candidates:
$ git log -1 --format='%(describe:match=v[0-9]*,exclude=*rc*)'
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a format placeholder for describe output. Implement it by actually
calling git describe, which is simple and guarantees correctness. It's
intended to be used with $Format:...$ in files with the attribute
export-subst and git archive. It can also be used with git log etc.,
even though that's going to be slow due to the fork for each commit.
Suggested-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Isolate and document initialization of `istate->fsmonitor_last_update`.
This field should contain a fsmonitor-specific opaque token, but we
need to initialize it before we can actually talk to a fsmonitor process,
so we create a generic default value.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's measure the time taken to request and receive FSMonitor data
via the hook API and the size of the response.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Report the number of files in the working directory that were read and
their hashes verified in `refresh_index()`.
FSMonitor improves the performance of commands like `git status` by
avoiding scanning the disk for changed files. Let's measure this.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Report the total number of calls made to lstat() inside of refresh_index().
FSMonitor improves the performance of commands like `git status` by
avoiding scanning the disk for changed files. This can be seen in
`refresh_index()`. Let's measure this.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Report the total number of calls made to lstat() inside preload_index().
FSMonitor improves the performance of commands like `git status` by
avoiding scanning the disk for changed files. This can be seen in
`preload_index()`. Let's measure this.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add optional trace logging to allow us to better compare performance of
various fsmonitor providers and compare results with non-fsmonitor runs.
Currently, this includes Trace2 logging, but may be extended to include
other trace targets, such as GIT_TRACE_FSMONITOR if desired.
Using this logging helped me explain an odd behavior on MacOS where the
kernel was dropping events and causing the hook to Watchman to timeout.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shutdown Watchman after the Watchman-based tests and before the block of
"no fsmonitor" tests.
This helps ensure that Watchman cannot affect the test results for the
other.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only use the final portion of the test trash directory file name
when verifying that Watchman was started.
On Windows and under the SDK, $GIT_WORKTREE is a cygwin-style
path with forward slashes and a "/c/" drive name. However
`watchman watch-list` reports a proper Windows-style pathname
with drive letters and backslashes. This causes the grep to
fail. Since we don't really care about the full pathname (and
we really don't want to bother with normalizaing them), just see
if the test-name portion of the path is found.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the test to use a more portable method to update the mtime on a
large number of files under version control.
The Mac version of xargs does not support the "-d" option.
Likewise, the "-0" and "--null" options are not portable.
Furthermore, use `test-tool chmtime` rather than `touch` to update the
mtime to ensure that it is actually updated (especially on file systems
with only whole second resolution).
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --temp (or --stage=all, which implies --temp), checkout-index
writes a list to stdout associating temporary file names to the entries'
names. But if it fails to write an entry, and the failure happens before
even assigning a temporary filename to that entry, we get an odd output
line. This can be seen when trying to check out a symlink whose blob is
missing:
$ missing_blob=$(git hash-object --stdin </dev/null)
$ git update-index --add --cacheinfo 120000,$missing_blob,foo
$ git checkout-index --temp foo
error: unable to read sha1 file of foo (e69de29bb2)
foo
The 'TAB foo' line is not much useful and it might break scripts that
expect the 'tempname TAB foo' output. So let's omit such entries from
the stdout list (but leaving the error message on stderr).
We could also consider omitting _all_ failed entries from the output
list, but that's probably not a good idea as the associated tempfiles
may have been created even when checkout failed, so scripts may want to
use the output list for cleanup.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variables `path` and `ce->name`, at write_entry(), usually have the
same contents, but that's not the case when using a checkout prefix or
writing to a tempfile. (In fact, `path` will be either empty or dirty
when writing to a tempfile.) Therefore, these variables cannot be used
interchangeably. In this sense, fix wrong uses of `path` in error
messages where it should really be `ce->name`, and add some regression
tests. (Note: there doesn't seem to be any misuse in the other way
around.)
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with .gitattributes and .gitignore, we would like to make sure that
.mailmap files are handled consistently whether read from the a blob (as
is the default behavior in a bare repo) or from the filesystem.
Likewise, we would like to avoid reading out-of-tree files pointed to by
a symlink, which could have security implications in certain setups.
We can cover both by using open_nofollow() when opening the in-tree
files. We'll continue to follow links for mailmap.file, as well as when
reading .mailmap from the current directory when outside of a repository
entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with .gitattributes, we would like to make sure that .gitignore files
are handled consistently whether read from the index or from the
filesystem. Likewise, we would like to avoid reading out-of-tree files
pointed to by the symlinks, which could have security implications in
certain setups.
We can cover both by using open_nofollow() when opening the in-tree
files. We'll continue to follow links for core.excludesFile, as well as
$GIT_DIR/info/exclude.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The attributes system may sometimes read in-tree files from the
filesystem, and sometimes from the index. In the latter case, we do not
resolve symbolic links (and are not likely to ever start doing so).
Let's open filesystem links with O_NOFOLLOW so that the two cases behave
consistently.
As a bonus, this means that git will not follow such symlinks to read
and parse out-of-tree paths. In some cases this could have security
implications, as a malicious repository can cause Git to open and read
arbitrary files. It could already feed arbitrary content to the parser,
but in certain setups it might be able to exfiltrate data from those
paths (e.g., if an automated service operating on the malicious repo
reveals its stderr to an attacker).
Note that O_NOFOLLOW only prevents following links for the path itself,
not intermediate directories in the path. At first glance, it seems
like
ln -s /some/path in-repo
might still look at "in-repo/.gitattributes", following the symlink to
"/some/path/.gitattributes". However, if "in-repo" is a symbolic link,
then we know that it has no git paths below it, and will never look at
its .gitattributes file.
We will continue to support out-of-tree symbolic links (e.g., in
$GIT_DIR/info/attributes); this just affects in-tree links. When a
symbolic link is encountered, the contents are ignored and a warning is
printed. POSIX specifies ELOOP in this case, so the user would generally
see something like:
warning: unable to access '.gitattributes': Too many levels of symbolic links
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a number of callers of add_patterns() and its sibling
functions. Let's give them a "flags" parameter for adding new options
without having to touch each caller. We'll use this in a future patch to
add O_NOFOLLOW support. But for now each caller just passes 0.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The attribute code can have a rather deep callstack, through
which we have to pass the "macro_ok" flag. In anticipation
of adding other flags, let's convert this to a generic
bit-field.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some callers of open() would like to use O_NOFOLLOW, but it is not
available on all platforms. Let's abstract this into a helper function
so we can provide system-specific implementations.
Some light web-searching reveals that we might be able to get something
similar on Windows using FILE_FLAG_OPEN_REPARSE_POINT. I didn't dig into
this further.
For other systems without O_NOFOLLOW or any equivalent, we have two
options for fallback:
- we can just open anyway, following symlinks; this may have security
implications (e.g., following untrusted in-tree symlinks)
- we can determine whether the path is a symlink with lstat().
This is slower (two syscalls instead of one), but that may be
acceptable for infrequent uses like looking up .gitattributes files
(especially because we can get away with a single syscall for the
common case of ENOENT).
It's also racy, but should be sufficient for our needs (we are
worried about in-tree symlinks that we ourselves would have
previously created). We could make it non-racy at the cost of making
it even slower, by doing an fstat() on the opened descriptor and
comparing the dev/ino fields to the original lstat().
This patch implements the lstat() option in its slightly-faster racy
form.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the implementation of "git difftool", there is a case where the
user wants to start viewing the diffs at a specific path and
continue on to the rest, optionally wrapping around to the
beginning. Since it is somewhat cumbersome to implement such a
feature as a post-processing step of "git diff" output, let's
support it internally with two new options.
- "git diff --rotate-to=C", when the resulting patch would show
paths A B C D E without the option, would "rotate" the paths to
shows patch to C D E A B instead. It is an error when there is
no patch for C is shown.
- "git diff --skip-to=C" would instead "skip" the paths before C,
and shows patch to C D E. Again, it is an error when there is no
patch for C is shown.
- "git log [-p]" also accepts these two options, but it is not an
error if there is no change to the specified path. Instead, the
set of output paths are rotated or skipped to the specified path
or the first path that sorts after the specified path.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to pass additional information to diffcore_rename() (or some
variant thereof) without plumbing that extra information through
diff_tree_oid() and diffcore_std(). Further, since we will need to
gather additional special information related to diffs and are walking
the trees anyway in collect_merge_info(), it seems odd to have
diff_tree_oid()/diffcore_std() repeat those tree walks. And there may
be times where we can avoid traversing into a subtree in
collect_merge_info() (based on additional information at our disposal),
that the basic diff logic would be unable to take advantage of. For all
these reasons, just create the add and delete pairs ourself and then
call diffcore_rename() directly.
This change is primarily about enabling future optimizations; the
advantage of avoiding extra tree traversals is small compared to the
cost of rename detection, and the advantage of avoiding the extra tree
traversals is somewhat offset by the extra time spent in
collect_merge_info() collecting the additional data anyway. However...
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 13.294 s ± 0.103 s 12.775 s ± 0.062 s
mega-renames: 187.248 s ± 0.882 s 188.754 s ± 0.284 s
just-one-mega: 5.557 s ± 0.017 s 5.599 s ± 0.019 s
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last few patches have introduced a new preliminary step when rename
detection is on but both break detection and copy detection are off.
Document this new step. While we're at it, add a testcase that checks
the new behavior as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make use of the new find_basename_matches() function added in the last
two patches, to find renames more rapidly in cases where we can match up
files based on basenames. As a quick reminder (see the last two commit
messages for more details), this means for example that
docs/extensions.txt and docs/config/extensions.txt are considered likely
renames if there are no remaining 'extensions.txt' files elsewhere among
the added and deleted files, and if a similarity check confirms they are
similar, then they are marked as a rename without looking for a better
similarity match among other files. This is a behavioral change, as
covered in more detail in the previous commit message.
We do not use this heuristic together with either break or copy
detection. The point of break detection is to say that filename
similarity does not imply file content similarity, and we only want to
know about file content similarity. The point of copy detection is to
use more resources to check for additional similarities, while this is
an optimization that uses far less resources but which might also result
in finding slightly fewer similarities. So the idea behind this
optimization goes against both of those features, and will be turned off
for both.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 13.815 s ± 0.062 s 13.294 s ± 0.103 s
mega-renames: 1799.937 s ± 0.493 s 187.248 s ± 0.882 s
just-one-mega: 51.289 s ± 0.019 s 5.557 s ± 0.017 s
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not uncommon in real world repositories for the majority of file
renames to not change the basename of the file; i.e. most "renames" are
just a move of files into different directories. We can make use of
this to avoid comparing all rename source candidates with all rename
destination candidates, by first comparing sources to destinations with
the same basenames. If two files with the same basename are
sufficiently similar, we record the rename; if not, we include those
files in the more exhaustive matrix comparison.
This means we are adding a set of preliminary additional comparisons,
but for each file we only compare it with at most one other file. For
example, if there was a include/media/device.h that was deleted and a
src/module/media/device.h that was added, and there are no other
device.h files in the remaining sets of added and deleted files after
exact rename detection, then these two files would be compared in the
preliminary step.
This commit does not yet actually employ this new optimization, it
merely adds a function which can be used for this purpose. The next
commit will do the necessary plumbing to make use of it.
Note that this optimization might give us different results than without
the optimization, because it's possible that despite files with the same
basename being sufficiently similar to be considered a rename, there's
an even better match between files without the same basename. I think
that is okay for four reasons: (1) it's easy to explain to the users
what happened if it does ever occur (or even for them to intuitively
figure out), (2) as the next patch will show it provides such a large
performance boost that it's worth the tradeoff, and (3) it's somewhat
unlikely that despite having unique matching basenames that other files
serve as better matches. Reason (4) takes a full paragraph to
explain...
If the previous three reasons aren't enough, consider what rename
detection already does. Break detection is not the default, meaning
that if files have the same _fullname_, then they are considered related
even if they are 0% similar. In fact, in such a case, we don't even
bother comparing the files to see if they are similar let alone
comparing them to all other files to see what they are most similar to.
Basically, we override content similarity based on sufficient filename
similarity. Without the filename similarity (currently implemented as
an exact match of filename), we swing the pendulum the opposite
direction and say that filename similarity is irrelevant and compare a
full N x M matrix of sources and destinations to find out which have the
most similar contents. This optimization just adds another form of
filename similarity comparison, but augments it with a file content
similarity check as well. Basically, if two files have the same
basename and are sufficiently similar to be considered a rename, mark
them as such without comparing the two to all other rename candidates.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to make use of unique basenames among remaining source and
destination files to help inform rename detection, so that more likely
pairings can be checked first. (src/moduleA/foo.txt and
source/module/A/foo.txt are likely related if there are no other
'foo.txt' files among the remaining deleted and added files.) Add a new
function, not yet used, which creates a map of the unique basenames
within rename_src and another within rename_dst, together with the
indices within rename_src/rename_dst where those basenames show up.
Non-unique basenames still show up in the map, but have an invalid index
(-1).
This function was inspired by the fact that in real world repositories,
files are often moved across directories without changing names. Here
are some sample repositories and the percentage of their historical
renames (as of early 2020) that preserved basenames:
* linux: 76%
* gcc: 64%
* gecko: 79%
* webkit: 89%
These statistics alone don't prove that an optimization in this area
will help or how much it will help, since there are also unpaired adds
and deletes, restrictions on which basenames we consider, etc., but it
certainly motivated the idea to try something in this area.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a simple test where a removed file is similar to two different added
files; one of them has the same basename, and the other has a slightly
higher content similarity. In the current test, content similarity is
weighted higher than filename similarity.
Subsequent commits will add a new rule that weighs a mixture of filename
similarity and content similarity in a manner that will change the
outcome of this testcase.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have to look at each entry in rename_src a total of rename_dst_nr
times. When we're not detecting copies, any exact renames or ignorable
rename paths will just be skipped over. While checking that these can
be skipped over is a relatively cheap check, it's still a waste of time
to do that check more than once, let alone rename_dst_nr times. When
rename_src_nr is a few thousand times bigger than the number of relevant
sources (such as when cherry-picking a commit that only touched a
handful of files, but from a side of history that has different names
for some high level directories), this time can add up.
First make an initial pass over the rename_src array and move all the
relevant entries to the front, so that we can iterate over just those
relevant entries.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 14.119 s ± 0.101 s 13.815 s ± 0.062 s
mega-renames: 1802.044 s ± 0.828 s 1799.937 s ± 0.493 s
just-one-mega: 51.391 s ± 0.028 s 51.289 s ± 0.019 s
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now, ref-filter is using pretty.c logic for setting trailer options.
New to ref-filter:
:key=<K> - only show trailers with specified key.
:valueonly[=val] - only show the value part.
:separator=<SEP> - inserted between trailer lines.
:key_value_separator=<SEP> - inserted between key and value in trailer lines
Enhancement to existing options(now can take value and its optional):
:only[=val]
:unfold[=val]
'val' can be: true, on, yes or false, off, no.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we would like to use this trailers logic in the ref-filter, it's
nice to get an invalid trailer argument. This will allow us to print
precise error message while using `format_set_trailers_options()` in
ref-filter.
For capturing the invalid argument, we changed the working of
`format_set_trailers_options()` a little bit.
Original logic does "break" and fell through in mainly 2 cases -
1. unknown/invalid argument
2. end of the arg string
But now instead of "break", we capture invalid argument and return
non-zero. And non-zero is handled by the caller.
(We prepared the caller to handle non-zero in the previous commit).
Capturing invalid arguments this way will also affects the working
of current logic. As at the end of the arg string it will return non-zero.
So in order to make things correct, introduced an additional conditional
statement i.e if encounter ")", do 'break'.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactored trailers formatting logic inside pretty.c to a new function
`format_set_trailers_options()`. This new function returns the non-zero
in case of unusual. The caller handles the non-zero by "goto trailers_out".
This change will allow us to reuse the same logic in other places.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function to test trailer options. This will make tests look cleaner,
as well as will make it easier to add new tests for trailers in the future.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commands are started from a subdirectory, they may have to
compare the path to the subdirectory (called prefix and found out
from $(pwd)) with the tracked paths. On macOS, $(pwd) and
readdir() yield decomposed path, while the tracked paths are
usually normalized to the precomposed form, causing mismatch. This
has been fixed by taking the same approach used to normalize the
command line arguments.
* tb/precompose-prefix-too:
MacOS: precompose_argv_prefix()
The command line completion (in contrib/) completed "git branch -d"
with branch names, but "git branch -D" offered tagnames in addition,
which has been corrected. "git branch -M" had the same problem.
* jk/complete-branch-force-delete:
doc/git-branch: fix awkward wording for "-c"
completion: handle other variants of "branch -m"
completion: treat "branch -D" the same way as "branch -d"
Fix in passing custom args from "git clone" to "upload-pack" on the
other side.
* jv/upload-pack-filter-spec-quotefix:
t5544: clarify 'hook works with partial clone' test
upload-pack.c: fix filter spec quoting bug
Introduce an on-disk file to record revindex for packdata, which
traditionally was always created on the fly and only in-core.
* tb/pack-revindex-on-disk:
t5325: check both on-disk and in-memory reverse index
pack-revindex: ensure that on-disk reverse indexes are given precedence
t: support GIT_TEST_WRITE_REV_INDEX
t: prepare for GIT_TEST_WRITE_REV_INDEX
Documentation/config/pack.txt: advertise 'pack.writeReverseIndex'
builtin/pack-objects.c: respect 'pack.writeReverseIndex'
builtin/index-pack.c: write reverse indexes
builtin/index-pack.c: allow stripping arbitrary extensions
pack-write.c: prepare to write 'pack-*.rev' files
packfile: prepare for the existence of '*.rev' files
Various test updates.
* ab/tests-various-fixup:
rm tests: actually test for SIGPIPE in SIGPIPE test
archive tests: use a cheaper "zipinfo -h" invocation to get header
upload-pack tests: avoid a non-zero "grep" exit status
git-svn tests: rewrite brittle tests to use "--[no-]merges".
git svn mergeinfo tests: refactor "test -z" to use test_must_be_empty
git svn mergeinfo tests: modernize redirection & quoting style
cache-tree tests: explicitly test HEAD and index differences
cache-tree tests: use a sub-shell with less indirection
cache-tree tests: remove unused $2 parameter
cache-tree tests: refactor for modern test style
diffcore_rename() had some code to avoid having destination paths that
already had an exact rename detected from being re-checked for other
renames. Source paths, however, were re-checked because we wanted to
allow the possibility of detecting copies. But if copy detection isn't
turned on, then this merely amounts to attempting to find a
better-than-exact match, which naturally ends up being an expensive
no-op. In particular, copy detection is never turned on by the merge
machinery.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 14.263 s ± 0.053 s 14.119 s ± 0.101 s
mega-renames: 5504.231 s ± 5.150 s 1802.044 s ± 0.828 s
just-one-mega: 158.534 s ± 0.498 s 51.391 s ± 0.028 s
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add assertions of the correct parameter count of various functions, in
particularly the wrappers for the shell "test" built-in.
In an earlier commit we fixed a bug with an incorrect number of
arguments being passed to "test_path_is_{file,missing}". Let's also
guard other similar functions from the same sort of misuse.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the optional "diagnostics" parameter of the
test_path_is_{file,dir,missing} functions.
We have a lot of uses of these functions, but the only legitimate use
of the diagnostics parameter is from when the functions themselves
were introduced in 2caf20c52b (test-lib: user-friendly alternatives
to test [-d|-f|-e], 2010-08-10).
But as the the rest of this diff demonstrates its presence did more to
silently introduce bugs in our tests. Fix such bugs in the tests added
in ae4e89e549 (gc: add --keep-largest-pack option, 2018-04-15), and
c04ba51739 (t6046: testcases checking whether updates can be skipped
in a merge, 2018-04-19).
Let's also assert that those functions are called with exactly one
parameter, a follow-up commit will add similar asserts to other
functions in test-lib-functions.sh that we didn't have existing misuse
of.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the "diff-lib" to "lib-diff". With this rename and preceding
commits there is no remaining t/*lib* which doesn't follow the
convention of being called t/lib-*.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "ort" merge strategy.
* en/merge-ort-perf:
merge-ort: begin performance work; instrument with trace2_region_* calls
merge-ort: ignore the directory rename split conflict for now
merge-ort: fix massive leak
ORT merge strategy learns to infer "renamed directory" while
merging.
* en/ort-directory-rename:
merge-ort: fix a directory rename detection bug
merge-ort: process_renames() now needs more defensiveness
merge-ort: implement apply_directory_rename_modifications()
merge-ort: add a new toplevel_dir field
merge-ort: implement handle_path_level_conflicts()
merge-ort: implement check_for_directory_rename()
merge-ort: implement apply_dir_rename() and check_dir_renamed()
merge-ort: implement compute_collisions()
merge-ort: modify collect_renames() for directory rename handling
merge-ort: implement handle_directory_level_conflicts()
merge-ort: implement compute_rename_counts()
merge-ort: copy get_renamed_dir_portion() from merge-recursive.c
merge-ort: add outline of get_provisional_directory_renames()
merge-ort: add outline for computing directory renames
merge-ort: collect which directories are removed in dirs_removed
merge-ort: initialize and free new directory rename data structures
merge-ort: add new data structures for directory rename detection
Currently invalid boolean config values return messages about 'bad
numeric', which is slightly misleading when the error was due to a
boolean value. We can improve the developer experience by returning a
boolean error message when we know the value is neither a bool text or
int.
before with an invalid boolean value of `non-boolean`, its unclear what
numeric is referring to:
fatal: bad numeric config value 'non-boolean' for 'commit.gpgsign': invalid unit
now the error message mentions `non-boolean` is a bad boolean value:
fatal: bad boolean config value 'non-boolean' for 'commit.gpgsign'
Signed-off-by: Andrew Klotz <agc.klotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to Documentation/CodingGuidelines, we should use "test"
rather than "[ ... ]" in shell scripts, so let's replace the
"[ ... ]" with "test" in the t7001 test script.
Signed-off-by: Shubham Verma <shubhunic@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change from old style to current style by taking advantage of
here-docs instead of echo commands.
Signed-off-by: Shubham Verma <shubhunic@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modern practice is to avoid multiple commands per line, and
instead place each command on its own line.
Signed-off-by: Shubham Verma <shubhunic@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `>` rather than `touch` to create an empty file when the
timestamp isn't relevant to the test.
Signed-off-by: Shubham Verma <shubhunic@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid using `cd` outside of subshells since, if the test fails,
there is no guarantee that the current working directory is the
expected one, which may cause subsequent tests to run in the wrong
directory.
While at it, make some other tests more concise by replacing
simple subshells with `git -C`.
Signed-off-by: Shubham Verma <shubhunic@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to Documentation/CodingGuidelines, there should be no
whitespace after redirect operators. So, we should remove these
whitespaces after redirect operators.
Signed-off-by: Shubham Verma <shubhunic@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some test use an old style for formatting subshells:
(command &&
...
Update them to the modern style:
(
command &&
...
Signed-off-by: Shubham Verma <shubhunic@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests use a deprecated style in which there are unnecessary
blank lines after the opening quote of the test body and before the
closing quote. So we should remove these unnecessary blank lines.
Signed-off-by: Shubham Verma <shubhunic@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests in this script are formatted using a very old style:
test_expect_success \
'title' \
'body line 1 &&
body line 2'
Update the formatting to the modern style:
test_expect_success 'title' '
body line 1 &&
body line 2
'
Signed-off-by: Shubham Verma <shubhunic@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Save sizeof(const char *) bytes by declaring ref_stash as an array
instead of having a redundant pointer to an array.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modernize the script by doing file content comparisons using test_cmp()
instead of `test x = "$(cat file)"`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to modernize the test script, replace `test -s` with
test_file_not_empty(), which provides better diagnostic output in the
case of failure.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a git command in a nested command substitution fails, it will be
silently ignored since only the return code of the outer command
substitutions is reported. Factor out nested command substitutions so
that the error codes of those commands are reported.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to modernize the tests, move commands that currently run
outside of test cases into a test case. Where possible, clean up files
that are produced using test_when_finished() but in the case where files
persist over multiple test cases, create a new test case to perform
cleanup.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For shell scripts, the usual convention is for there to be no space
after redirection operators, (e.g. `>file`, not `> file`). Remove these
spaces wherever they appear.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the options for the `list` and `show` subcommands are just
listed as `<options>`. This seems to imply, from a cursory glance at the
summary, that they take the stash options listed below. However, reading
more carefully, we see that they take log options and diff options
respectively.
Make it more obvious that they take log and diff options by explicitly
stating this in the subcommand summary.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can sometimes be useful to see which refs are contributing to the
overall repository size (e.g., does some branch have a bunch of objects
not found elsewhere in history, which indicates that deleting it would
shrink the size of a clone).
You can find that out by generating a list of objects, getting their
sizes from cat-file, and then summing them, like:
git rev-list --objects --no-object-names main..branch
git cat-file --batch-check='%(objectsize:disk)' |
perl -lne '$total += $_; END { print $total }'
Though note that the caveats from git-cat-file(1) apply here. We "blame"
base objects more than their deltas, even though the relationship could
easily be flipped. Still, it can be a useful rough measure.
But one problem is that it's slow to run. Teaching rev-list to sum up
the sizes can be much faster for two reasons:
1. It skips all of the piping of object names and sizes.
2. If bitmaps are in use, for objects that are in the
bitmapped packfile we can skip the oid_object_info()
lookup entirely, and just ask the revindex for the
on-disk size.
This patch implements a --disk-usage option which produces the same
answer in a fraction of the time. Here are some timings using a clone of
torvalds/linux:
[rev-list piped to cat-file, no bitmaps]
$ time git rev-list --objects --no-object-names --all |
git cat-file --buffer --batch-check='%(objectsize:disk)' |
perl -lne '$total += $_; END { print $total }'
1459938510
real 0m29.635s
user 0m38.003s
sys 0m1.093s
[internal, no bitmaps]
$ time git rev-list --disk-usage --objects --all
1459938510
real 0m31.262s
user 0m30.885s
sys 0m0.376s
Even though the wall-clock time is slightly worse due to parallelism,
notice the CPU savings between the two. We saved 21% of the CPU just by
avoiding the pipes.
But the real win is with bitmaps. If we use them without the new option:
[rev-list piped to cat-file, bitmaps]
$ time git rev-list --objects --no-object-names --all --use-bitmap-index |
git cat-file --batch-check='%(objectsize:disk)' |
perl -lne '$total += $_; END { print $total }'
1459938510
real 0m6.244s
user 0m8.452s
sys 0m0.311s
then we're faster to generate the list of objects, but we still spend a
lot of time piping and looking things up. But if we do both together:
[internal, bitmaps]
$ time git rev-list --disk-usage --objects --all --use-bitmap-index
1459938510
real 0m0.219s
user 0m0.169s
sys 0m0.049s
then we get the same answer much faster.
For "--all", that answer will correspond closely to "du objects/pack",
of course. But we're actually checking reachability here, so we're still
fast when we ask for more interesting things:
$ time git rev-list --disk-usage --use-bitmap-index v5.0..v5.10
374798628
real 0m0.429s
user 0m0.356s
sys 0m0.072s
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `gc.writeCommitGraph = true`, it is possible that the commit-graph
is _still_ not written: replace objects, grafts and shallow repositories
are incompatible with the commit-graph feature.
Under such circumstances, we need to indicate to the user why the
commit-graph was not written instead of staying silent about it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whenever a user runs `git reflog expire --stale-fix`, the most likely
reason is that their repository is at least _somewhat_ corrupt. Which
means that it is more than just possible that some objects are missing.
If that is the case, that can currently let the command abort through
the phase where it tries to mark all reachable objects.
Instead of adding insult to injury, let's be gentle and continue as best
as we can in such a scenario, simply by ignoring the missing objects and
moving on.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in 296d4a94e7 (diff: add -I<regex> that ignores
matching changes, 2020-10-20) by freeing the memory it allocates in
the newly introduced diff_free(). See the previous commit for details
on that.
This memory leak was intentionally introduced in 296d4a94e7, see the
discussion on a previous iteration of it in
https://lore.kernel.org/git/xmqqeelycajx.fsf@gitster.c.googlers.com/
At that time freeing the memory was somewhat tedious, but since it
isn't anymore with the newly introduced diff_free() let's use it.
Let's retain the pattern for diff_free_file() and add a
diff_free_ignore_regex(), even though (unlike "diff_free_file") we
don't need to call it elsewhere. I think this'll make for more
readable code than gradually accumulating a giant diff_free()
function, sharing "int i" across unrelated code etc.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a diff_free() function to free anything we may have allocated in
the "diff_options" struct, and the ability to make calling it a noop
by setting "no_free" in "diff_options".
This is required because when e.g. "git diff" is run we'll allocate
things in that struct, use the diff machinery once, and then exit.
But if we run e.g. "git log -p" we're going to re-use what we
allocated across multiple diff_flush() calls, and only want to free
things at the end.
We've thus ended up with features like the recently added "diff -I"[1]
where we'll leak memory. As it turns out it could have simply used the
pattern established in 6ea57703f6 (log: prepare log/log-tree to reuse
the diffopt.close_file attribute, 2016-06-22).
Manually adding more such flags to things log_tree_commit() every time
we need to allocate something would be tedious. Let's instead move
that fclose() code it to a new diff_free(), in anticipation of freeing
more things in that function in follow-up commits.
Some functions such as log_tree_commit() need an idiom of optionally
retaining a previous "no_free", as they may either free the memory
themselves, or their caller may do so. I'm keeping that idiom in
log_show_early() for good measure, even though I don't think it's
currently called in this manner. It also gets passed an existing
"struct rev_info", so future callers may want to set the "no_free"
flag.
This change is a bit hard to read because while the freeing pattern
we're introducing isn't unusual, the "file" member is a special
snowflake. We usually don't want to fclose() it. This is because
"file" is usually stdout, in which case we don't want to fclose()
it. We only want to opt-in to closing it when we e.g. open a file on
the filesystem. Thus the opt-in "close_file" flag.
So the API in general just needs a "no_free" flag to defer freeing,
but the "file" member still needs its "close_file" flag. This is made
more confusing because while refactoring this code we could replace
some "close_file=0" with "no_free=1", whereas others need to set both
flags.
This is because there were some cases where an existing "close_file=0"
meant "let's defer deallocation", and others where it meant "we don't
want to close this file handle at all".
1. 296d4a94e7 (diff: add -I<regex> that ignores matching changes,
2020-10-20)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a follow-up to d162b25f95 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp
via a simple s/test_i18ncmp/test_cmp/g search-replacement.
I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight
changes between "master" and "seen", as well as the prerequisite
itself due to other changes between "master" and "next/seen" which add
new test_i18ncmp uses.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the last uses of the C_LOCALE_OUTPUT prerequisite as well as
the prerequisite itself. This is a follow-up to d162b25f95 (tests:
remove support for GIT_TEST_GETTEXT_POISON, 2021-01-20), as well as
the preceding commit where we removed the simpler uses of
C_LOCALE_OUTPUT.
Here I'm slightly refactoring a test added in 21e5ad50fc (safecrlf:
Add mechanism to warn about irreversible crlf conversions,
2008-02-06), as well as getting rid of another "test_have_prereq
C_LOCALE_OUTPUT" use.
I'm not leaving the prerequisite itself in place for in-flight changes
as there currently are none that introduce new tests that rely on it,
and because C_LOCALE_OUTPUT is currently a noop on the master branch
we likely won't have any new submissions that use it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a follow-up to d162b25f95 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove those uses of the now
always true C_LOCALE_OUTPUT prerequisite from those tests which
declare it as an argument to test_expect_{success,failure}.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow-up my 73c01d25fe (tests: remove uses of
GIT_TEST_GETTEXT_POISON=false, 2021-01-20) by removing the last uses
of GIT_TEST_GETTEXT_POISON=*.
These assignments were part of branch that was in-flight at the time
of the gettext poison removal. See 466f94ec45 (Merge branch
'ab/detox-gettext-tests', 2021-02-10) and c7d6d419b0 (Merge branch
'ab/mktag', 2021-01-25) for the merging of the two branches.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git help gc` contains this snippet:
"[...] it will keep [..] objects referenced by the index,
remote-tracking branches, notes saved by git notes under refs/notes/"
I had interpreted that as saying that the objects that notes were
attached to are kept, but that is not the case. Let's clarify the
documentation by moving out the part about git notes to a separate
sentence.
Signed-off-by: Martin von Zweigbergk <martinvonz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have a multiply signed commit, we need to remove the signature
in the header before verifying the object, since the trailing signature
will not be over both pieces of data. Do so, and verify that we
validate the signature appropriately.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we parse a signature in the ref-filter code, we continually
increment the buffer pointer. Hoist the signature parsing above the
blank line delimiting headers and body so we can find the signature when
using a header to sign the buffer.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently only commits are signed with headers. However, in the future,
we'll also sign tags with headers as well. Let's refactor out a
function called parse_buffer_signed_by_header which does exactly that.
In addition, since we'll want to sign things other than commits this
way, let's call the function sign_with_header instead of do_sign_commit.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a function which parses a buffer with a signature at the end,
parse_signature, and this function is used for signed tags. However,
we'll need to store values for multiple algorithms, and we'll do this by
using a header for the non-default algorithm.
Adjust the parse_signature interface to store the parsed data in two
strbufs and turn the existing function into parse_signed_buffer. The
latter is still used in places where we know we always have a signed
buffer, such as push certs.
Adjust all the callers to deal with this new interface.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The version of Ubuntu Linux used by default at GitHub Actions CI
has been updated to one that lack coccinelle; until it gets fixed,
work it around by sticking to the previous release (18.04).
* tb/ci-run-cocci-with-18.04:
.github/workflows/main.yml: run static-analysis on bionic
Get rid of "GETTEXT_POISON" support altogether, which may or may
not be controversial.
* ab/detox-gettext-tests:
tests: remove uses of GIT_TEST_GETTEXT_POISON=false
tests: remove support for GIT_TEST_GETTEXT_POISON
ci: remove GETTEXT_POISON jobs
Update support for invalid UTF-8 in PCRE2.
* ab/grep-pcre-invalid-utf8:
grep/pcre2: better support invalid UTF-8 haystacks
grep/pcre2 tests: don't rely on invalid UTF-8 data test
The support for deprecated PCRE1 library has been dropped.
* ab/retire-pcre1:
Remove support for v1 of the PCRE library
config.mak.uname: remove redundant NO_LIBPCRE1_JIT flag
Some pretty-format specifiers do not need the data in commit object
(e.g. "%H"), but we were over-eager to load and parse it, which has
been made even lazier.
* jk/pretty-lazy-load-commit:
pretty: lazy-load commit data when expanding user-format
Cleaning various codepaths up.
* ds/more-index-cleanups:
t1092: test interesting sparse-checkout scenarios
test-lib: test_region looks for trace2 regions
sparse-checkout: load sparse-checkout patterns
name-hash: use trace2 regions for init
repository: add repo reference to index_state
fsmonitor: de-duplicate BUG()s around dirty bits
cache-tree: extract subtree_pos()
cache-tree: simplify verify_cache() prototype
cache-tree: clean up cache_tree_update()
When "git rebase -i" processes "fixup" insn, there is no reason to
clean up the commit log message, but we did the usual stripspace
processing. This has been corrected.
* js/rebase-i-commit-cleanup-fix:
rebase -i: do leave commit message intact in fixup! chains
Code clean-up.
* jk/t0000-cleanups:
t0000: consistently use single quotes for outer tests
t0000: run cleaning test inside sub-test
t0000: run prereq tests inside sub-test
t0000: keep clean-up tests together
Lose the debugging aid that may have been useful in the past, but
no longer is, in the "grep" codepaths.
* ab/lose-grep-debug:
grep/log: remove hidden --debug and --grep-debug options
Code clean-up to ensure our use of hashtables using object names as
keys use the "struct object_id" objects, not the raw hash values.
* jk/use-oid-pos:
oid_pos(): access table through const pointers
hash_pos(): convert to oid_pos()
rerere: use strmap to store rerere directories
rerere: tighten rr-cache dirname check
rerere: check dirname format while iterating rr_cache directory
commit_graft_pos(): take an oid instead of a bare hash
This behavior of git-rev-parse is observed since git 1.8.3.1
at least(*), and likely earlier versions.
At least one git-reliant project in-the-wild relies on this
current behavior of git-rev-parse being able to handle multiple
--since= arguments without squeezing identical results together.
So add a test to prevent the potential for regression in
downstream projects.
(*) 1.8.3.1 the version packaged for CentOS 7.x
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the test, FAKE_COMMIT_MESSAGE replaces the commit message each
time it is invoked so there will be only one instance of "Modified-A3"
no matter how many times we invoke the editor. Let's fix this and use
FAKE_COMMIT_AMEND instead so that it adds "Modified-A3" once for each
time the editor is invoked.
This patch also removes the check for counting the number of
"Modified-A3" lines and instead compares the whole message to check
that the commenting code works correctly for 'fixup -c' as well as
'fixup -C'.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the named commits in the tests so that they will still refer to the
same commit if the setup gets changed in the future whereas 'branch~2'
will change which commit it points to.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's simplify the test_commit_message() helper function and add
comments to the function.
This patch also document the working of 'fixup -C' with "amend!" in the
test-description.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As it is currently implemented, it's too difficult to follow along and
remember the value of "expected-message" from test to test. It also
makes it difficult to extend tests or add new tests in between existing
tests without negatively impacting other tests.
Let's set up "expected-message" to the precise content needed by the
test, so that both the problems go away and also makes easier to run
tests selectively with '--run' or 'GIT_SKIP_TESTS'
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The most common way to format here-docs in Git test scripts is for the
body and EOF to be indented the same amount as the command which opened
the here-doc. Fix a few here-docs in this script to conform to that
standard and also remove the unnecessary curly braces.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `-c` says "edit the commit message" it's not clear what will be
edited. The original's commit message or the replacement's message or a
combination of the two. Word it such that it states more precisely what
exactly will be edited. While at it, also drop the jarring period and
capitalization, neither of which is otherwise present in the message.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sort the lines starting with "/", the only out-of-place line was added
along with most of the file in 614f4f0f35 (Fix the remaining tests
that failed with core.autocrlf=true, 2017-05-09).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move a function added to test-lib-functions.sh in ea047a8eb4 (t5310:
factor out bitmap traversal comparison, 2020-02-14) into a new
lib-bitmap.sh.
The test-lib-functions.sh file should be for functions that are widely
used across the test suite, if something's only used by a few tests it
makes more sense to have it in a lib-*.sh file.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename gitweb-lib.sh to lib-gitweb.sh for consistency with other test
library files.
When it was introduced in 05526071cb (gitweb: split test suite into
library and tests, 2009-08-27) this naming pattern was more
common.
Since then all but one other such library which didn't start with
"lib-*.sh" such as t6000lib.sh has been been renamed, see
e.g. 9d488eb40e (Move t6000lib.sh to lib-*, 2010-05-07).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the recently introduced test-bundle-functions.sh to be
consistent with other lib-*.sh files, which is the convention for
these sorts of shared test library functions.
The new test-bundle-functions.sh was introduced in 9901164d81 (test:
add helper functions for git-bundle, 2021-01-11). It was the only
test-*.sh of this nature.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d5cfd142ec (tests: teach the test-tool to generate NUL bytes
and use it, 2019-02-14) the generate_zero_bytes() functions has been a
thin wrapper for "test-tool genzeros". Let's have its only user call
that directly instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the test_set_index_version() function to its only user. This
function has only been used in one place since its addition in
5d9fc888b4 (test-lib: allow setting the index format version,
2014-02-23). Let's have that test script define it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change two uses of "error" in test-lib-functions.sh to "BUG".
In the first instance in "test_cmp_rev" the author of the "BUG"
function added in [1] had another in-flight patch adding this in [2],
and the two were never consolidated.
In the second case in "test_atexit" added in [3] that we could have
instead used "BUG" appears to have been missed.
1. 165293af3c (tests: send "bug in the test script" errors to the
script's stderr, 2018-11-19)
2. 30d0b6dccb (test-lib-functions: make 'test_cmp_rev' more
informative on failure, 2018-11-19)
3. 900721e15c (test-lib: introduce 'test_atexit', 2019-03-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the check_var_migration() migration helper. This was added back
in [1], [2] and [3] to warn users to migrate from e.g. the
"GIT_FSMONITOR_TEST" name to "GIT_TEST_FSMONITOR".
I daresay that having been warning about this since late 2018 (or
v2.20.0) was sufficient time to give everyone interested a heads-up
about moving to the new names.
I don't see the need for going through the "do this later" codepath
anticipated in [1], let's just remove this instead.
1. 4cb54d0aa8 (fsmonitor: update GIT_TEST_FSMONITOR support,
2018-09-18)
2. 1f357b045b (read-cache: update TEST_GIT_INDEX_VERSION support,
2018-09-18)
3. 5765d97b71 (preload-index: update GIT_FORCE_PRELOAD_TEST support,
2018-09-18)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to find a .mailmap file, we will always look for it in the
current directory. This makes sense in a repository with a working tree,
since we'd always go to the toplevel directory at startup. But for a
bare repository, it can be confusing. With an option like --git-dir (or
$GIT_DIR in the environment), we don't chdir at all, and we'd read
.mailmap from whatever directory you happened to be in before starting
Git.
(Note that --git-dir without specifying a working tree historically
means "the current directory is the root of the working tree", but most
bare repositories will have core.bare set these days, meaning they will
realize there is no working tree at all).
The documentation for gitmailmap(5) says:
If the file `.mailmap` exists at the toplevel of the repository[...]
which likewise reinforces the notion that we are looking in the working
tree.
This patch prevents us from looking for such a file when we're in a bare
repository. This does break something that used to work:
cd bare.git
git cat-file blob HEAD:.mailmap >.mailmap
git shortlog
But that was never advertised in the documentation. And these days we
have mailmap.blob (which defaults to HEAD:.mailmap) to do the same thing
in a much cleaner way.
However, there's one more interesting case: we might not have a
repository at all! The git-shortlog command can be run with git-log
output fed on its stdin, and it will apply the mailmap. In that case, it
probably does make sense to read .mailmap from the current directory.
This patch will continue to do so.
That leads to one even weirder case: if you run git-shortlog to process
stdin, the input _could_ be from a different repository entirely. Should
we respect the in-tree .mailmap then? Probably yes. Whatever the source
of the input, if shortlog is running in a repository, the documentation
claims that we'd read the .mailmap from its top-level (and of course
it's reasonably likely that it _is_ from the same repo, and the user
just preferred to run git-log and git-shortlog separately for whatever
reason).
The included test covers these cases, and we now document the "no repo"
case explicitly.
We also add a test that confirms we find a top-level ".mailmap" even
when we start in a subdirectory of the working tree. This worked both
before and after this commit, but we never tested it explicitly (it
works because we always chdir to the top-level of the working tree if
there is one).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 7b35efd734 (fsck_walk(): optionally name objects on the go,
2016-07-17), the `fsck` machinery learned to optionally name the
objects, so that it is easier to see what part of the repository is in a
bad shape, say, when objects are missing.
To save on complexity, this machinery uses a parser to determine the
name of a parent given a commit's name: any `~<n>` suffix is parsed and
the parent's name is formed from the prefix together with `~<n+1>`.
However, this parser has a bug: if it finds a suffix `<n>` that is _not_
`~<n>`, it will mistake the empty string for the prefix and `<n>` for
the generation number. In other words, it will generate a name of the
form `~<bogus-number>`.
Let's fix this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function can be simplified by using the `test_oid_to_path()`
helper, which incidentally also makes it more robust by not relying on
the exact file system layout of the loose object files.
While at it, do not define those functions in a test case, it buys us
nothing.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a sparse checked out repository, `git grep` (without --cached) ends
up searching the cache when an entry matches the search pathspec and has
the SKIP_WORKTREE bit set. This is confusing both because the sparse
paths are not expected to be in a working tree search (as they are not
checked out), and because the output mixes working tree and cache
results without distinguishing them. (Note that grep also resorts to the
cache on working tree searches that include --assume-unchanged paths.
But the whole point in that case is to assume that the contents of the
index entry and the file are the same. This does not apply to the case
of sparse paths, where the file isn't even expected to be present.)
Fix that by teaching grep to honor the sparse-checkout rules for working
tree searches. If the user wants to grep paths outside the current
sparse-checkout definition, they may either update the sparsity rules to
materialize the files, or use --cached to search all blobs registered in
the index.
Note: it might also be interesting to add a configuration option that
allow users to search paths that are present despite having the
SKIP_WORKTREE bit set, and/or to restrict searches in the index and past
revisions too. These ideas are left as future improvements to avoid
conflicting with other sparse-checkout topics currently in flight.
Suggested-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the 'maintenance.strategy' config option is set to 'incremental',
a default maintenance schedule is enabled. Add the 'pack-refs' task to
that strategy at the weekly cadence.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is valuable to collect loose refs into a more compressed form. This
is typically the packed-refs file, although this could be the reftable
in the future. Having packed refs can be extremely valuable in repos
with many tags or remote branches that are not modified by the local
user, but still are necessary for other queries.
For instance, with many exploded refs, commands such as
git describe --tags --exact-match HEAD
can be very slow (multiple seconds). This command in particular is used
by terminal prompts to show when a detatched HEAD is pointing to an
existing tag, so having it be slow causes significant delays for users.
Add a new 'pack-refs' maintenance task. It runs 'git pack-refs --all
--prune' to move loose refs into a packed form. For now, that is the
packed-refs file, but could adjust to other file formats in the future.
This is the first of several sub-tasks of the 'gc' task that could be
extracted to their own tasks. In this process, we should not change the
behavior of the 'gc' task since that remains the default way to keep
repositories maintained. Creating a new task for one of these sub-tasks
only provides more customization options for those choosing to not use
the 'gc' task. It is certainly possible to have both the 'gc' and
'pack-refs' tasks enabled and run regularly. While they may repeat
effort, they do not conflict in a destructive way.
The 'auto_condition' function pointer is left NULL for now. We could
extend this in the future to have a condition check if pack-refs should
be run during 'git maintenance run --auto'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
die() messages are traced in trace2, but BUG() messages are not. Anyone
tracking die() messages would have even more reason to track BUG().
Therefore, write to trace2 when BUG() is invoked.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a per-tool override flag so that users may enable the flag for one
tool and disable it for another by setting
`mergetool.<tool>.hideResolved` to `false`.
In addition, the author or maintainer of a mergetool may optionally
override the default `hideResolved` value for that mergetool. If the
`mergetools/<tool>` shell script contains a `hide_resolved_enabled`
function it will be called when the mergetool is invoked and the return
value will be used as the default for the `hideResolved` flag.
hide_resolved_enabled () {
return 1
}
Disabling may be desirable if the mergetool wants or needs access to the
original, unmodified 'LOCAL' and 'REMOTE' versions of the conflicted
file. For example:
- A tool may use a custom conflict resolution algorithm and prefer to
ignore the results of Git's conflict resolution.
- A tool may want to visually compare/constrast the version of the file
from before the merge (saved to 'LOCAL', 'REMOTE', and 'BASE') with
Git's conflict resolution results (saved to 'MERGED').
Helped-by: Johannes Sixt <j6t@kdbg.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Seth House <seth@eseth.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is preparation for the following commit where we need to source the
mergetool shell script to look for overrides before `run_merge_tool` is
called. Previously `run_merge_tool` both sourced that script and invoked
the mergetool.
In the case of the following commit, we need the result of the
`hide_resolved` override, if present, before we actually run
`run_merge_tool`.
The new `initialize_merge_tool` wrapper is exposed and documented as
a public interface for consistency with the existing `run_merge_tool`
which is also public. Although `setup_tool` could instead be exposed
directly, the related `setup_user_tool` would probably also want to be
elevated to match and this felt the cleanest to me.
Signed-off-by: Seth House <seth@eseth.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of a mergetool is to help the user resolve any conflicts
that Git cannot automatically resolve. If there is a conflict that must
be resolved manually Git will write a file named MERGED which contains
everything Git was able to resolve by itself and also everything that it
was not able to resolve wrapped in conflict markers.
One way to think of MERGED is as a two- or three-way diff. If each
"side" of the conflict markers is separately extracted an external tool
can represent those conflicts as a side-by-side diff.
However many mergetools instead diff LOCAL and REMOTE both of which
contain versions of the file from before the merge. Since the conflicts
Git resolved automatically are not present it forces the user to
manually re-resolve those conflicts. Some mergetools also show MERGED
but often only for reference and not as the focal point to resolve the
conflicts.
This adds a `mergetool.hideResolved` flag that will overwrite LOCAL and
REMOTE with each corresponding "side" of a conflicted file and thus hide
all conflicts that Git was able to resolve itself. Overwriting these
files will immediately benefit any mergetool that uses them without
requiring any changes to the tool.
No adverse effects were noted in a small survey of popular mergetools[1]
so this behavior defaults to `true`. However it can be globally disabled
by setting `mergetool.hideResolved` to `false`.
[1] https://www.eseth.org/2020/mergetools.htmlc884424769/2020/mergetools.md
Original-implementation-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Seth House <seth@eseth.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the conveniences that test_commit offers is making a tag for each
commit. This makes it easy to refer to the commits in subsequent
commands. But it can also be a pain if you care about reachability,
because those tags keep the commits reachable even if they are rewound
from the branch they're made on.
The alternative is that scripts have to call test_tick, git-add, and
git-commit themselves. Let's add a --no-tag option to give them the
one-liner convenience of using test_commit.
This is in preparation for the next patch, which will add some more
calls. But I cleaned up an existing site to show off the feature. There
are probably more cleanups possible.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The options --untracked and --cached are not compatible, but if they are
used together, grep just silently ignores --cached and searches the
working tree. Error out, instead, to avoid any potential confusion.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three forms, depending whether the user specifies one, two or
three non-option arguments. We've never actually explained how this
works in the manual, so let's explain it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the `SPECIFYING RANGES` section of gitrevisions[7], two ways are
described to specify commit ranges that `range-diff` does not yet
accept: "<commit>^!" and "<commit>^-<n>".
Let's accept them, by parsing them via the revision machinery and
looking for at least one interesting and one uninteresting revision in
the resulting `pending` array.
This also finally lets us reject arguments that _do_ contain `..` but
are not actually ranges, e.g. `HEAD^{/do.. match this}`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When comparing commit ranges, one is frequently interested only in one
side, such as asking the question "Has this patch that I submitted to
the Git mailing list been applied?": one would only care about the part
of the output that corresponds to the commits in a local branch.
To make that possible, imitate the `git rev-list` options `--left-only`
and `--right-only`.
This addresses https://github.com/gitgitgadget/git/issues/206
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is actually only the `output()` function that uses those diffopts. By
moving the diffopt initialization down into that function, it is
encapsulated better.
Incidentally, it will also make it easier to implement the `--left-only`
and `--right-only` options in `git range-diff` because the `output()`
function is now receiving all range-diff options as a parameter, not
just the diffopts.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will make it easier to implement the `--left-only` and
`--right-only` options.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We've carried compatibility codepaths for compilers without
variadic macros for quite some time, but the world may be ready for
them to be removed. Force compilation failure on exotic platforms
where variadic macros are not available to find out who screams in
such a way that we can easily revert if it turns out that the world
is not yet ready.
* jk/weather-balloon-require-variadic-macro:
git-compat-util: always enable variadic macros
Our setting of GitHub CI test jobs were a bit too eager to give up
once there is even one failure found. Tweak the knob to allow
other jobs keep running even when we see a failure, so that we can
find more failures in a single run.
* pb/ci-matrix-wo-shortcut:
ci: do not cancel all jobs of a matrix if one fails
The "pack-objects" command needs to iterate over all the tags when
automatic tag following is enabled, but it actually iterated over
all refs and then discarded everything outside "refs/tags/"
hierarchy, which was quite wasteful.
* jv/pack-objects-narrower-ref-iteration:
builtin/pack-objects.c: avoid iterating all refs
When removing many branches and tags, the code used to do so one
ref at a time. There is another API it can use to delete multiple
refs, and it makes quite a lot of performance difference when the
refs are packed.
* ph/use-delete-refs:
use delete_refs when deleting tags or branches
The ls-refs protocol operation has been optimized to narrow the
sub-hierarchy of refs/ it walks to produce response.
* tb/ls-refs-optim:
ls-refs.c: traverse prefixes of disjoint "ref-prefix" sets
ls-refs.c: initialize 'prefixes' before using it
refs: expose 'for_each_fullref_in_prefixes'
"git ls-files" can and does show multiple entries when the index is
unmerged, which is a source for confusion unless -s/-u option is in
use. A new option --deduplicate has been introduced.
* zh/ls-files-deduplicate:
ls-files.c: add --deduplicate option
ls_files.c: consolidate two for loops into one
ls_files.c: bugfix for --deleted and --modified
Document, clean-up and optimize the code around the cache-tree
extension in the index.
* ds/cache-tree-basics:
cache-tree: speed up consecutive path comparisons
cache-tree: use ce_namelen() instead of strlen()
index-format: discuss recursion of cache-tree better
index-format: update preamble to cache tree extension
index-format: use 'cache tree' over 'cached tree'
cache-tree: trace regions for prime_cache_tree
cache-tree: trace regions for I/O
cache-tree: use trace2 in cache_tree_update()
unpack-trees: add trace2 regions
tree-walk: report recursion counts
ORT merge strategy learns more support for merge conflicts.
* en/ort-conflict-handling:
merge-ort: add handling for different types of files at same path
merge-ort: copy find_first_merges() implementation from merge-recursive.c
merge-ort: implement format_commit()
merge-ort: copy and adapt merge_submodule() from merge-recursive.c
merge-ort: copy and adapt merge_3way() from merge-recursive.c
merge-ort: flesh out implementation of handle_content_merge()
merge-ort: handle book-keeping around two- and three-way content merge
merge-ort: implement unique_path() helper
merge-ort: handle directory/file conflicts that remain
merge-ort: handle D/F conflict where directory disappears due to merge
"git log" learned a new "--diff-merges=<how>" option.
* so/log-diff-merge: (32 commits)
t4013: add tests for --diff-merges=first-parent
doc/git-show: include --diff-merges description
doc/rev-list-options: document --first-parent changes merges format
doc/diff-generate-patch: mention new --diff-merges option
doc/git-log: describe new --diff-merges options
diff-merges: add '--diff-merges=1' as synonym for 'first-parent'
diff-merges: add old mnemonic counterparts to --diff-merges
diff-merges: let new options enable diff without -p
diff-merges: do not imply -p for new options
diff-merges: implement new values for --diff-merges
diff-merges: make -m/-c/--cc explicitly mutually exclusive
diff-merges: refactor opt settings into separate functions
diff-merges: get rid of now empty diff_merges_init_revs()
diff-merges: group diff-merge flags next to each other inside 'rev_info'
diff-merges: split 'ignore_merges' field
diff-merges: fix -m to properly override -c/--cc
t4013: add tests for -m failing to override -c/--cc
t4013: support test_expect_failure through ':failure' magic
diff-merges: revise revs->diff flag handling
diff-merges: handle imply -p on -c/--cc logic for log.c
...
In preparation for creating an API around file formats using chunks and
tables of contents, prepare the commit-graph write code to use
prototypes that will match this new API.
Specifically, convert chunk_write_fn to take a "void *data" parameter
instead of the commit-graph-specific "struct write_commit_graph_context"
pointer.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach Git to use the "unborn" feature introduced in a previous patch as
follows: Git will always send the "unborn" argument if it is supported
by the server. During "git clone", if cloning an empty repository, Git
will use the new information to determine the local branch to create. In
all other cases, Git will ignore it.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a future patch we plan to return the name of an unborn current branch
from deep in the callchain to a caller via a new pointer parameter that
points at a variable in the caller when the caller calls
get_remote_refs() and transport_get_remote_refs().
In preparation for that, encapsulate the existing ref_prefixes
parameter into a struct. The aforementioned unborn current branch will
go into this new struct in the future patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning, we choose the default branch based on the remote HEAD.
But if there is no remote HEAD reported (which could happen if the
target of the remote HEAD is unborn), we'll fall back to using our local
init.defaultBranch. Traditionally this hasn't been a big deal, because
most repos used "master" as the default. But these days it is likely to
cause confusion if the server and client implementations choose
different values (e.g., if the remote started with "main", we may choose
"master" locally, create commits there, and then the user is surprised
when they push to "master" and not "main").
To solve this, the remote needs to communicate the target of the HEAD
symref, even if it is unborn, and "git clone" needs to use this
information.
Currently, symrefs that have unborn targets (such as in this case) are
not communicated by the protocol. Teach Git to advertise and support the
"unborn" feature in "ls-refs" (by default, this is advertised, but
server administrators may turn this off through the lsrefs.unborn
config). This feature indicates that "ls-refs" supports the "unborn"
argument; when it is specified, "ls-refs" will send the HEAD symref with
the name of its unborn target.
This change is only for protocol v2. A similar change for protocol v0
would require independent protocol design (there being no analogous
position to signal support for "unborn") and client-side plumbing of the
data required, so the scope of this patch set is limited to protocol v2.
The client side will be updated to use this in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move rationale for new hash function to beginning of document
so that it appears before the concrete move to SHA-256 is described.
Remove some of the details about SHA-1 weaknesses and add references
to the details on how the new hash function was chosen instead.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use SHA-1 and SHA-256 instead of sha1 and sha256 when referring
to the hash type.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoc requires lists to start with an empty line and uses
different characters for indentation levels ("-", "*", "**", ...).
For special symbols like a dash "--" has to be used and there is
no double arrow "<->", so a left and right arrow "<-->" has to be
combined for that. Lastly for verbatim output a newline followed
by an indentation has to be used.
Fix asciidoc output for lists, special characters and verbatim
text while retaining the readabilty of the original text file.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we waited for the child process to be finished in every
failing code path as well as at the end of the function
`show_range_diff()`.
However, we do not need to wait that long. Directly after reading the
output of the child process, we can wrap up the child process.
This also has the advantage that we don't do a bunch of unnecessary work
in case `finish_command()` returns with an error anyway.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In library functions, we do want to avoid the (simple, but rather final)
`die()` calls, instead returning with a value indicating an error.
Let's do exactly that in the code introduced in b66885a30c
(range-diff: add section header instead of diff header, 2019-07-11) that
wants to error out if a diff header could not be parsed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the code paths in question, we already release a lot of memory, but
the `current_filename` variable was missed. Fix that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The .use_shell flag in struct child_process that is passed to
run_command() API has been clarified with a bit more documentation.
* jk/run-command-use-shell-doc:
run-command: document use_shell option
Test clean-up plus UI improvement by hiding extra refs that
the prefetch task uses from "log --decorate" output.
* ds/maintenance-prefetch-cleanup:
t7900: clean up some broken refs
maintenance: set log.excludeDecoration durin prefetch
Reimplement the `bisect_skip()` shell function in C and also add
`bisect-skip` subcommand to `git bisect--helper` to call it from
git-bisect.sh
Using `--bisect-skip` subcommand is a temporary measure to port shell
function to C so as to use the existing test suite.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `res` variable to store `bisect_reset()` output in BISECT_RESET
case option to make bisect--helper.c more consistent.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement the `bisect_replay` shell function in C and also add
`--bisect-replay` subcommand to `git bisect--helper` to call it from
git-bisect.sh
Using `--bisect-replay` subcommand is a temporary measure to port shell
function to C so as to use the existing test suite.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description for "-c" is hard to parse. I think the big issue is lack
of commas, but I've also reordered the words to keep the main focus
point of "instead of renaming, copy" together.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We didn't special-case "branch -M" (with a capital M) the same as
"branch -m", nor any of the "--copy" variants. As a result these offered
any ref as the next candidate, and not just branch names.
Note that I rewrapped case-arm line since it's now quite long, and
likewise the one below it for consistency. I also re-ordered the
existing "-D" to make it more obvious how the cases group together.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following sequence leads to a "BUG" assertion running under MacOS:
DIR=git-test-restore-p
Adiarnfd=$(printf 'A\314\210')
DIRNAME=xx${Adiarnfd}yy
mkdir $DIR &&
cd $DIR &&
git init &&
mkdir $DIRNAME &&
cd $DIRNAME &&
echo "Initial" >file &&
git add file &&
echo "One more line" >>file &&
echo y | git restore -p .
Initialized empty Git repository in /tmp/git-test-restore-p/.git/
BUG: pathspec.c:495: error initializing pathspec_item
Cannot close git diff-index --cached --numstat
[snip]
The command `git restore` is run from a directory inside a Git repo.
Git needs to split the $CWD into 2 parts:
The path to the repo and "the rest", if any.
"The rest" becomes a "prefix" later used inside the pathspec code.
As an example, "/path/to/repo/dir-inside-repå" would determine
"/path/to/repo" as the root of the repo, the place where the
configuration file .git/config is found.
The rest becomes the prefix ("dir-inside-repå"), from where the
pathspec machinery expands the ".", more about this later.
If there is a decomposed form, (making the decomposing visible like this),
"dir-inside-rep°a" doesn't match "dir-inside-repå".
Git commands need to:
(a) read the configuration variable "core.precomposeunicode"
(b) precocompose argv[]
(c) precompose the prefix, if there was any
The first commit,
76759c7dff "git on Mac OS and precomposed unicode"
addressed (a) and (b).
The call to precompose_argv() was added into parse-options.c,
because that seemed to be a good place when the patch was written.
Commands that don't use parse-options need to do (a) and (b) themselfs.
The commands `diff-files`, `diff-index`, `diff-tree` and `diff`
learned (a) and (b) in
commit 90a78b83e0 "diff: run arguments through precompose_argv"
Branch names (or refs in general) using decomposed code points
resulting in decomposed file names had been fixed in
commit 8e712ef6fc "Honor core.precomposeUnicode in more places"
The bug report from above shows 2 things:
- more commands need to handle precomposed unicode
- (c) should be implemented for all commands using pathspecs
Solution:
precompose_argv() now handles the prefix (if needed), and is renamed into
precompose_argv_prefix().
Inside this function the config variable core.precomposeunicode is read
into the global variable precomposed_unicode, as before.
This reading is skipped if precomposed_unicode had been read before.
The original patch for preocomposed unicode, 76759c7dff, placed
precompose_argv() into parse-options.c
Now add it into git.c::run_builtin() as well. Existing precompose
calls in diff-files.c and others may become redundant, and if we
audit the callflows that reach these places to make sure that they
can never be reached without going through the new call added to
run_builtin(), we might be able to remove these existing ones.
But in this commit, we do not bother to do so and leave these
precompose callsites as they are. Because precompose() is
idempotent and can be called on an already precomposed string
safely, this is safer than removing existing calls without fully
vetting the callflows.
There is certainly room for cleanups - this change intends to be a bug fix.
Cleanups needs more tests in e.g. t/t3910-mac-os-precompose.sh, and should
be done in future commits.
[1] git-bugreport-2021-01-06-1209.txt (git can't deal with special characters)
[2] https://lore.kernel.org/git/A102844A-9501-4A86-854D-E3B387D378AA@icloud.com/
Reported-by: Daniel Troger <random_n0body@icloud.com>
Helped-By: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The former offers not just branches but tags as completion
candidates.
Mimic how "branch -d" limits its suggestion to branch names.
Reported-by: Paul Jolly <paul@myitcv.io>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply a few leftover improvements from the review of ad5df6b782
(upload-pack.c: fix filter spec quoting bug).
1. Instead of enumerating objects reachable from HEAD, enumerate all
reachable objects, because HEAD has not special significance in this
test.
2. Instead of relying on the knowledge that "? in rev-list output
means partial clone", explicitly verify that there are no blobs with
cat-file.
Signed-off-by: Jacob Vosmaer <jacob@gitlab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git invokes a pager that exits with non-zero the common case is
that we'll already return the correct SIGPIPE failure from git itself,
but the exit code logged in trace2 has always been incorrectly
reported[1]. Fix that and log the correct exit code in the logs.
Since this gives us something to test outside of our recently-added
tests needing a !MINGW prerequisite, let's refactor the test to run on
MINGW and actually check for SIGPIPE outside of MINGW.
The wait_or_whine() is only called with a true "in_signal" from from
finish_command_in_signal(), which in turn is only used in pager.c.
The "in_signal && !WIFEXITED(status)" case is not covered by
tests. Let's log the default -1 in that case for good measure.
1. The incorrect logging of the exit code in was seemingly copy/pasted
into finish_command_in_signal() in ee4512ed48 (trace2: create new
combined trace facility, 2019-02-22)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add braces to an "if" block in the wait_or_whine() function. This
isn't needed now, but will make a subsequent commit easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for how git behaves when the pager itself exits with
non-zero, as well as for us exiting with 141 when we're killed with
SIGPIPE due to the pager not consuming its output.
There is some recent discussion[1] about these semantics, but aside
from what we want to do in the future, we should have a test for the
current behavior.
This test construct is stolen from 7559a1be8a (unblock and unignore
SIGPIPE, 2014-09-18). The reason not to make the test itself depend on
the MINGW prerequisite is to make a subsequent commit easier to read.
1. https://lore.kernel.org/git/87o8h4omqa.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the wait_for_pager() function. Since 507d7804c0 (pager:
don't use unsafe functions in signal handlers, 2015-09-04) the
wait_for_pager() and wait_for_pager_atexit() callers diverged on more
than they shared.
Let's extract the common code into a new close_pager_fds() helper, and
move the parts unique to the only to callers to those functions.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before checking if the repository has a commit-graph loaded, be sure
to run prepare_commit_graph(). This is necessary because otherwise
the topo_levels slab is not initialized. As we compute topo_levels for
the new commits, we iterate further into the lower layers since the
first visit to each commit looks as though the topo_level is not
populated.
By properly initializing the topo_slab, we fix the previously broken
case of a split commit graph where a base layer has the
generation_data_overflow chunk.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When upgrading to a commit-graph with corrected commit dates from
one without, there are a few things that need to be considered.
When computing generation numbers for the new commit-graph file that
expects to add the generation_data chunk with corrected commit
dates, we need to ensure that the 'generation' member of the
commit_graph_data struct is set to zero for these commits.
Unfortunately, the fallback to use topological level for generation
number when corrected commit dates are not available are causing us
harm here: parsing commits notices that read_generation_data is
false and populates 'generation' with the topological level.
The solution is to iterate through the commits, parse the commits
to populate initial values, then reset the generation values to
zero to trigger recalculation. This loop only occurs when the
existing commit-graph data has no corrected commit dates.
While this improves our situation somewhat, we have not completely
solved the issue for correctly computing generation numbers for mixed
layers. That follows in the next change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The compute_generation_numbers() method was introduced by 3258c663
(commit-graph: compute generation numbers, 2018-05-01) to compute what
is now known as "topological levels". These are still stored in the
commit-graph file for compatibility sake while c1a09119 (commit-graph:
implement corrected commit date, 2021-01-16) updated the method to also
compute the new version of generation numbers: corrected commit date.
It makes sense why these are grouped. They perform very similar walks of
the necessary commits and compute similar maximums over each parent.
However, having these two together conflates them in subtle ways that is
hard to separate.
In particular, the topo_level slab is used to store the topological
levels in all cases, but the commit_graph_data_at(c)->generation member
stores different values depending on the state of the existing
commit-graph file.
* If the existing commit-graph file has a "GDAT" chunk, then these
values represent corrected commit dates.
* If the existing commit-graph file doesn't have a "GDAT" chunk, then
these values are actually the topological levels.
This issue only occurs only when upgrading an existing commit-graph file
into one that has the "GDAT" chunk. The current change does not resolve
this upgrade problem, but splitting the implementation into two pieces
here helps with that process, which will follow in the next change.
The important thing this helps with is the case where the
num_generation_data_overflows was being incremented incorrectly,
triggering a write of the overflow chunk.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to be extra careful that we don't use corrected
commit dates from any layer of a commit-graph chain if there is a
single commit-graph file that is missing the generation_data chunk.
Update validate_mixed_generation_chain() to correctly update each
layer to ignore the generation_data chunk in this case. It now also
returns 1 if all layers have a generation_data chunk. This return
value will be used in the next change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a subtle failure happening when computing corrected commit
dates with --split enabled. It requires a base layer needing the
generation_data_overflow chunk. Then, the next layer on top
erroneously thinks it needs an overflow chunk due to a bug leading
to recalculating all reachable generation numbers. The output of
the failure is
BUG: commit-graph.c:1912: expected to write 8 bytes to
chunk 47444f56, but wrote 0 instead
These "expected" 8 bytes are due to re-computing the corrected
commit date for the lower layer but the new layer does not need
any overflow.
Add a test to t5318-commit-graph.sh that demonstrates this bug. However,
it does not trigger consistently with the existing code.
The generation number data is stored in a slab and accessed by
commit_graph_data_at(). This data is initialized when parsing a commit,
but is otherwise used assuming it has been populated. The loop in
compute_generation_numbers() did not enforce that all reachable
commits were parsed and had correct values. This could lead to some
problems when writing a commit-graph with corrected commit dates based
on a commit-graph without them.
It has been difficult to identify the issue here because it was so hard
to reproduce. It relies on this uninitialized data having a non-zero
value, but also on specifically in a way that overwrites the existing
data.
This patch adds the extra parse to ensure the data is filled before we
compute the generation number of a commit. This triggers the new test
to fail because the generation number overflow count does not match
between this computation and the write for that chunk.
The actual fix will follow as the next few changes.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph_context has a repository pointer, so use it.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a comment at the beggining of remove_redundant() that mentions a
reordering of the input array to have the initial segment be the
independent commits and the final segment be the redundant commits.
While this behavior is followed in remove_redundant(), no callers rely
on that behavior.
Remove the final loop that copies this final segment and update the
comment to match the new behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree list" annotates each worktree according to its state such
as "prunable" or "locked", however it is not immediately obvious why
these worktrees are being annotated. For prunable worktrees a reason
is available that is returned by should_prune_worktree() and for locked
worktrees a reason might be available provided by the user via `lock`
command.
Let's teach "git worktree list" a --verbose mode that outputs the reason
why the worktrees are being annotated. The reason is a text that can take
virtually any size and appending the text on the default columned format
will make it difficult to extend the command with other annotations and
not fit nicely on the screen. In order to address this shortcoming the
annotation is then moved to the next line indented followed by the reason
If the reason is not available the annotation stays on the same line as
the worktree itself.
The output of "git worktree list" with verbose becomes like so:
$ git worktree list --verbose
...
/path/to/locked-no-reason acb124 [branch-a] locked
/path/to/locked-with-reason acc125 [branch-b]
locked: worktree with a locked reason
/path/to/prunable-reason ace127 [branch-d]
prunable: gitdir file points to non-existent location
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git worktree list" command shows the absolute path to the worktree,
the commit that is checked out, the name of the branch, and a "locked"
annotation if the worktree is locked, however, it does not indicate
whether the worktree is prunable.
The "prune" command will remove a worktree if it is prunable unless
`--dry-run` option is specified. This could lead to a worktree being
removed without the user realizing before it is too late, in case the
user forgets to pass --dry-run for instance. If the "list" command shows
which worktree is prunable, the user could verify before running
"git worktree prune" and hopefully prevents the working tree to be
removed "accidentally" on the worse case scenario.
Let's teach "git worktree list" to show when a worktree is a prunable
candidate for both default and porcelain format.
In the default format a "prunable" text is appended:
$ git worktree list
/path/to/main aba123 [main]
/path/to/linked 123abc [branch-a]
/path/to/prunable ace127 (detached HEAD) prunable
In the --porcelain format a prunable label is added followed by
its reason:
$ git worktree list --porcelain
...
worktree /path/to/prunable
HEAD abc1234abc1234abc1234abc1234abc1234abc12
detached
prunable gitdir file points to non-existent location
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c57b3367be (worktree: teach `list` to annotate locked worktree,
2020-10-11) taught "git worktree list" to annotate locked worktrees by
appending "locked" text to its output, however, this is not listed in
the --porcelain format.
Teach "list --porcelain" to do the same and add a "locked" attribute
followed by its reason, thus making both default and porcelain format
consistent. If the locked reason is not available then only "locked"
is shown.
The output of the "git worktree list --porcelain" becomes like so:
$ git worktree list --porcelain
...
worktree /path/to/locked
HEAD 123abcdea123abcd123acbd123acbda123abcd12
detached
locked
worktree /path/to/locked-with-reason
HEAD abc123abc123abc123abc123abc123abc123abc1
detached
locked reason why it is locked
...
In porcelain mode, if the lock reason contains special characters
such as newlines, they are escaped with backslashes and the entire
reason is enclosed in double quotes. For example:
$ git worktree list --porcelain
...
locked "worktree's path mounted in\nremovable device"
...
Furthermore, let's update the documentation to state that some
attributes in the porcelain format might be listed alone or together
with its value depending whether the value is available or not. Thus
documenting the case of the new "locked" attribute.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c57b3367be (worktree: teach `list` to annotate locked worktree,
2020-10-11) introduced a new test to ensure locked worktrees are listed
with "locked" annotation. However, the test does not clean up after
itself as "git worktree prune" is not going to remove the locked worktree
in the first place. This not only leaves the test in an unclean state it
also potentially breaks following tests that rely on the
"git worktree list" output.
Let's fix that by unlocking the worktree before the "prune" command.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
worktree_lock_reason() aborts with an assertion failure when called on
the main worktree since locking the main worktree is nonsensical. Not
only is this behavior undocumented, thus callers might not even be aware
that the call could potentially crash the program, but it also forces
clients to be extra careful:
if (!is_main_worktree(wt) && worktree_locked_reason(...))
...
Since we know that locking makes no sense in the context of the main
worktree, we can simply return false for the main worktree, thus making
client code less complex by eliminating the need for the callers to have
inside knowledge about the implementation:
if (worktree_lock_reason(...))
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add worktree_prune_reason() to allow a caller to discover whether a
worktree is prunable and the reason that it is, much like
worktree_lock_reason() indicates whether a worktree is locked and the
reason for the lock. As with worktree_lock_reason(), retrieve the
prunable reason lazily and cache it in the `worktree` structure.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of teaching "git worktree list" to annotate worktree that is a
candidate for pruning, let's move should_prune_worktree() from
builtin/worktree.c to worktree.c in order to make part of the worktree
public API.
should_prune_worktree() knows how to select the given worktree for
pruning based on an expiration date, however the expiration value is
stored in a static file-scope variable and it is not local to the
function. In order to move the function, teach should_prune_worktree()
to take the expiration date as an argument and document the new
parameter that is not immediately obvious.
Also, change the function comment to clearly state that the worktree's
path is returned in `wtpath` argument.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the commit subject starts with "amend!" then rearrange it like a
"fixup!" commit and replace `pick` command with `fixup -C` command,
which is used to fixup up the content if any and replaces the original
commit message with amend! commit's message.
Original-patch-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add options to `fixup` command to fixup both the commit contents and
message. `fixup -C` command is used to replace the original commit
message and `fixup -c`, additionally allows to edit the commit message.
Original-patch-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When squashing commit messages the squash!/fixup! subjects are not of
interest so comment them out to stop them becoming part of the final
message.
This change breaks a bunch of --autosquash tests which rely on the
"squash! <subject>" line appearing in the final commit message. This is
addressed by adding a second line to the commit message of the "squash!
..." commits and testing for that.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now, the test suite can be run with 'GIT_TEST_WRITE_REV_INDEX=1'
in the environment, which causes all operations which write a pack to
also write a .rev file.
To prepare for when that eventually becomes the default, we should
continue to test the in-memory reverse index, too, in order to avoid
losing existing coverage. Unfortunately, explicit existing coverage is
rather sparse, so only a basic test is added that compares the result of
git rev-list --objects --no-object-names --all |
git cat-file --batch-check='%(objectsize:disk) %(objectname)'
with and without an on-disk reverse index.
Suggested-by: Jeff King <peff@peff.net>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we expand a user-format, we try to avoid work that isn't necessary
for the output. For instance, we don't bother parsing the commit header
until we know we need the author, subject, etc.
But we do always load the commit object's contents from disk, even if
the format doesn't require it (e.g., just "%H"). Traditionally this
didn't matter much, because we'd have loaded it as part of the traversal
anyway, and we'd typically have those bytes attached to the commit
struct (or these days, cached in a commit-slab).
But when we have a commit-graph, we might easily get to the point of
pretty-printing a commit without ever having looked at the actual object
contents. We should push off that load (and reencoding) until we're
certain that it's needed.
I think the results of p4205 show the advantage pretty clearly (we serve
parent and tree oids out of the commit struct itself, so they benefit as
well):
# using git.git as the test repo
Test HEAD^ HEAD
----------------------------------------------------------------------
4205.1: log with %H 0.40(0.39+0.01) 0.03(0.02+0.01) -92.5%
4205.2: log with %h 0.45(0.44+0.01) 0.09(0.09+0.00) -80.0%
4205.3: log with %T 0.40(0.39+0.00) 0.04(0.04+0.00) -90.0%
4205.4: log with %t 0.46(0.46+0.00) 0.09(0.08+0.01) -80.4%
4205.5: log with %P 0.39(0.39+0.00) 0.03(0.03+0.00) -92.3%
4205.6: log with %p 0.46(0.46+0.00) 0.10(0.09+0.00) -78.3%
4205.7: log with %h-%h-%h 0.52(0.51+0.01) 0.15(0.14+0.00) -71.2%
4205.8: log with %an-%ae-%s 0.42(0.41+0.00) 0.42(0.41+0.01) +0.0%
# using linux.git as the test repo
Test HEAD^ HEAD
----------------------------------------------------------------------
4205.1: log with %H 7.12(6.97+0.14) 0.76(0.65+0.11) -89.3%
4205.2: log with %h 7.35(7.19+0.16) 1.30(1.19+0.11) -82.3%
4205.3: log with %T 7.58(7.42+0.15) 1.02(0.94+0.08) -86.5%
4205.4: log with %t 8.05(7.89+0.15) 1.55(1.41+0.13) -80.7%
4205.5: log with %P 7.12(7.01+0.10) 0.76(0.69+0.07) -89.3%
4205.6: log with %p 7.38(7.27+0.10) 1.32(1.20+0.12) -82.1%
4205.7: log with %h-%h-%h 7.81(7.67+0.13) 1.79(1.67+0.12) -77.1%
4205.8: log with %an-%ae-%s 7.90(7.74+0.15) 7.81(7.66+0.15) -1.1%
I added the final test to show where we don't improve (the 1% there is
just lucky noise), but also as a regression test to make sure we're not
doing anything stupid like loading the commit multiple times when there
are several placeholders that need it.
Reported-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 6e98de72c0 (sequencer (rebase -i): add support for the 'fixup' and
'squash' commands, 2017-01-02), this developer introduced a change of
behavior by mistake: when encountering a `fixup!` commit (or multiple
`fixup!` commits) without any `squash!` commit thrown in, the final `git
commit` was invoked with `--cleanup=strip`. Prior to that commit, the
commit command had been called without that `--cleanup` option.
Since we explicitly read the original commit message from a file in that
case, there is really no sense in forcing that clean-up.
We actually need to actively suppress that clean-up lest a configured
`commit.cleanup` may interfere with what we want to do: leave the commit
message unchanged.
Reported-by: Vojtěch Knyttl <vojtech@knyt.tl>
Helped-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we use the sub-test helpers, we end up defining one shell snippet
inside another shell snippet. So if we use single-quotes for the outer
snippet, we have to use double-quotes within the inner snippet (it's
included as here-doc within the outer snippet, but using a single quote
would end the outer snippet early). Or vice versa we can use double
quotes for the outer snippet, but then single quotes in the inner.
We have some of each in the script, and neither is wrong. But it would
be nice to be consistent unless there is a good reason not to. Using
single quotes for the outer script is preferable, because it requires
less metacharacter quoting overall. For example, in:
test_expect_success 'outer' '
run_sub_test_lib_test ... <<-\EOF
echo $foo &&
test_expect_success "inner" "
echo \$bar
"
EOF
'
we need only quote inside "inner", but not inside "outer" or the
here-doc. Whereas if we flip them, we have to quote in both places:
test_expect_success 'outer' "
run_sub_test_lib_test ... <<-\EOF
echo \$foo &&
test_expect_success 'inner' '
echo \$bar
'
EOF
"
The exception is when we need a literal single-quote in an expected
output here-doc. There we can either use outer double-quotes, or just
use ${SQ} within the doc. I chose the latter for consistency (within
this test, but also with other test scripts that face the same problem).
There is one other interesting case, which is some tests that do:
test_expect_success ... "
do_something --run='"'!3'"'
"
This is rather confusing to read, but is correct. The outer script sees
'!3' in single-quotes, as does the eval'd snippet. This is perhaps being
overly cautious. In many interactive shells, an exclamation triggers
history expansion even inside double quotes, but that is not generally
true in non-interactive shells.
There's some conflicting information here. Commit 784ce03d55 (t4216:
avoid unnecessary subshell in test_bloom_filters_not_used, 2020-05-19)
reports it as a problem with OpenBSD 6.7's /bin/sh. However, we have
many instances in this script of prereqs like !LAZY_TRUE, which haven't
been a problem. I left them un-escaped here to test out this theory.
It's much nicer if we can not worry about this as a portability issue,
so it's worth knowing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our check of test_when_finished is done directly in the main script, and
if we failed to clean, we complain and exit immediately. It's nicer to
signal a test failure here, for a few reasons:
- this gives better output to the user when run under a TAP harness
like "prove"
- constency; it's the only test left in the file that behaves this way
- half of its "if" conditional is nonsense anyway; it picked up a
reference to GIT_TEST_FAIL_PREREQS_INTERNAL in dfe1a17df9 (tests:
add a special setup where prerequisites fail, 2019-05-13) along with
its neighbors, even though it has nothing to do with that flag
We could actually do this without a sub-test at all, and just put our
two tests (one to do cleanup, and one to check that it happened) in the
main script. But doing it in a subtest is conceptually cleaner (from the
perspective of the main test script, we are checking only one thing),
and it remains consistent with the "cleanup when failing" test directly
after it, which has to happen in a sub-test (to avoid the main script
complaining of the failed test).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We test the behavior of prerequisites in t0000 by setting up fake ones
in the main test script, trying to run some tests, and then seeing if
those tests impacted the environment correctly. If they didn't, then we
write a message and manually call exit.
Instead, let's push these down into a sub-test, like many of the other
tests covering the framework itself. This has a few advantages:
- it does not pollute the test output with mention of skipped tests
(that we know are uninteresting -- the point of the test was to see
that these are skipped).
- when running in a TAP harness, we get a useful test failure message
(whereas when the script exits early, a tool like "prove" simply
says "Dubious, test returned 1").
- we do not have to worry about different test environments, such as
when GIT_TEST_FAIL_PREREQS_INTERNAL is set. Our sub-test helpers
already give us a known environment.
- the tests themselves are a bit easier to read, as we can just check
the test-framework output to see what happened (and get the usual
test_cmp diff if it failed)
A few notes on the implementation:
- we could do one sub-test per each individual test_expect_success. I
broke it up here into a few logical groups, as I think this makes it
more readable
- the original tests modified environment variables inside the test
bodies. Instead, I've used "true" as the body of a test we expect to
run and "false" otherwise. Technically this does not confirm that
the body of the "true" test actually ran. We are trusting the
framework output to believe that it truly ran, which is sufficient
for these tests. And I think the end result is much simpler to
follow.
- the nested_prereq test uses a few bare "test -f" calls; I converted
these to our usual test_path_is_* helpers while moving the code
around.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check that test_when_finished cleans up after a test, and that it
runs even after a failure. Those two were originally adjacent, but got
split apart by the new test added in 477dcaddb6 (tests: do not let lazy
prereqs inside `test_expect_*` turn off tracing, 2020-03-26), and then
further by more lazy-prereq tests. Let's move them back together.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are looking up an oid in an array, we obviously don't need to
write to the array. Let's mark it as const in the function interfaces,
as well as in the local variables we use to derference the void pointer
(note a few cases use pointers-to-pointers, so we mark everything
const).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of our callers are actually looking up an object_id, not a bare
hash. Likewise, the arrays they are looking in are actual arrays of
object_id (not just raw bytes of hashes, as we might find in a pack
.idx; those are handled by bsearch_hash()).
Using an object_id gives us more type safety, and makes the callers
slightly shorter. It also gets rid of the word "sha1" from several
access functions, though we could obviously also rename those with
s/sha1/hash/.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We store a struct for each directory we access under .git/rr-cache. The
structs are kept in an array sorted by the binary hash associated with
their name (and we do lookups with a binary search).
This works OK, but there are a few small downsides:
- the amount of code isn't huge, but it's more than we'd need using one
of our other stock data structures
- the insertion into a sorted array is quadratic (though in practice
it's unlikely anybody has enough conflicts for this to matter)
- it's intimately tied to the representation of an object hash. This
isn't a big deal, as the conflict ids we generate use the same hash,
but it produces a few awkward bits (e.g., we are the only user of
hash_pos() that is not using object_id).
Let's instead just treat the directory names as strings, and store them
in a strmap. This is less code, and removes the use of hash_pos().
Insertion is now non-quadratic, though we probably use a bit more
memory. Besides the hash table overhead, and storing hex bytes instead
of a binary hash, we actually store each name twice. Other code expects
to access the name of a rerere_dir struct from the struct itself, so we
need a copy there. But strmap keeps its own copy of the name, as well.
Using a bare hashmap instead of strmap means we could use the name for
both, but at the cost of extra code (e.g., our own comparison function).
Likewise, strmap has a feature to use a pointer to the in-struct name at
the cost of a little extra code. I didn't do either here, as simple code
seemed more important than squeezing out a few bytes of efficiency.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check only that get_sha1_hex() doesn't complain, which means we'd
match an all-hex name with trailing cruft after it. This probably
doesn't matter much in practice, since there shouldn't be anything else
in the rr-cache directory, but it could possibly cause us to mix up sha1
and sha256 entries (which also shouldn't be intermingled, but could be
leftovers from a repository conversion).
Note that "get_sha1_hex()" is a confusing historical name. It is
actually using the_hash_algo, so it would be sha256 in a sha256 repo.
We'll switch to using parse_oid_hex(), because that conveniently
advances our pointer. But it also gets rid of the sha1 name. Arguably
it's a little funny to use "object_id" here for something that isn't
actually naming an object, but it's unlikely to be a problem (and is
contained in a single function).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In rerere_gc(), we walk over the .git/rr_cache directory and create a
struct for each entry we find. We feed any name we get from readdir() to
find_rerere_dir(), which then calls get_sha1_hex() on it (since we use
the binary hash as a lookup key). If that fails (i.e., the directory
name is not what we expected), it returns NULL. But the comment in
find_rerere_dir() says "BUG".
It _would_ be a bug for the call from new_rerere_id_hex(), the only
other code path, to fail here; it's generating the hex internally. But
the call in rerere_gc() is using it say "is this a plausible directory
name".
Let's instead have rerere_gc() do its own "is this plausible" check.
That has two benefits:
- we can now reliably BUG() inside find_rerere_dir(), which would
catch bugs in the other code path (and we now will never return NULL
from the function, which makes it easier to see that a rerere_id
struct will always have a non-NULL "collection" field).
- it makes the use of the binary hash an implementation detail of
find_rerere_dir(), not known by callers. That will free us up to
change it in a future patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of our callers have an object_id, and are just dereferencing the
hash field to pass to us. Let's take the actual object_id instead. We
still access the hash to pass to hash_pos, but it's a step in the right
direction.
This makes the callers slightly simpler, but also gets rid of the
untyped pointer, as well as the now-inaccurate name "sha1".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug in upload-pack.c that occurs when you combine partial
clone and uploadpack.packObjectsHook. You can reproduce it as
follows:
git clone -u 'git -c uploadpack.allowfilter '\
'-c uploadpack.packobjectshook=env '\
'upload-pack' --filter=blob:none --no-local \
src.git dst.git
Be careful with the line endings because this has a long quoted
string as the -u argument.
The error I get when I run this is:
Cloning into '/tmp/broken'...
remote: fatal: invalid filter-spec ''blob:none''
error: git upload-pack: git-pack-objects died with error.
fatal: git upload-pack: aborting due to possible repository corruption on the remote side.
remote: aborting due to possible repository corruption on the remote side.
fatal: early EOF
fatal: index-pack failed
The problem is caused by unneeded quoting.
This bug was already present in 10ac85c785 (upload-pack: add object
filtering for partial clone, 2017-12-08) when the server side filter
support was introduced. In fact, in 10ac85c785 this was broken
regardless of uploadpack.packObjectsHook. Then in 0b6069fe0a
(fetch-pack: test support excluding large blobs, 2017-12-08) the
quoting was removed but only behind a conditional that depends on
whether uploadpack.packObjectsHook is set.
Because uploadpack.packObjectsHook is apparently rarely used, nobody
noticed the problematic quoting could still happen.
Remove the conditional quoting and add a test for partial clone in
t5544-pack-objects-hook.
Signed-off-by: Jacob Vosmaer <jacob@gitlab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We allow variadic macros in the code base, but only if there is fallback
code for platforms that lack it. This leads to some annoyances:
- the code is more complicated because of the fallbacks (e.g.,
trace_printf(), etc, is implemented twice with a set of parallel
wrappers).
- some constructs are just impossible and we've had to live without
them (e.g., a cross between FLEX_ALLOC and xstrfmt)
Since this feature is present in C99, we may be able to start counting
on it being available everywhere. Let's start with a weather balloon
patch to find out.
This patch makes the absolute minimal change by always setting
HAVE_VARIADIC_MACROS. If somebody runs into a platform where it's a
problem, they can undo it by commenting out the define. Likewise, if we
have to revert this, it would be quite unlikely to cause conflicts.
Once we feel comfortable that this is the right direction, then we can
start ripping out all the spots that actually look at the flag, and
removing the dead code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when called with exactly two arguments, `git range-diff`
tests for a literal `..` in each of the two. Likewise, the argument
provided via `--range-diff` to `git format-patch` is checked in the same
manner.
However, `<commit>^!` is a perfectly valid commit range, equivalent to
`<commit>^..<commit>` according to the `SPECIFYING RANGES` section of
gitrevisions[7].
In preparation for allowing more sophisticated ways to specify commit
ranges, let's refactor the check into its own function.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'./t1234-foo.sh --stress-jobs=X ...' is supposed to run that test
script in X parallel jobs, but the number of jobs specified on the
command line is entirely ignored if other '--stress'-related options
follow. I.e. both './t1234-foo.sh --stress-jobs=X --stress-limit=Y'
and './t1234-foo.sh --stress-jobs=X --stress' fall back to using twice
the number of CPUs parallel jobs instead.
The former has been broken since commit de69e6f6c9 (tests: let
--stress-limit=<N> imply --stress, 2019-03-03) [1], which started to
unconditionally overwrite the $stress variable holding the specified
number of jobs in its effort to imply '--stress'. The latter has been
broken since f545737144 (tests: introduce --stress-jobs=<N>,
2019-03-03), because it didn't consider that handling '--stress' will
overwrite that variable as well.
We could fix this by being more careful about (over)writing that
$stress variable and checking first whether it has already been set.
But I think it's cleaner to use a dedicated variable to hold the
number of specified parallel jobs, so let's do that instead.
[1] In de69e6f6c9 there was no '--stress-jobs=X' option yet, the
number of parallel jobs had to be specified via '--stress=X', so,
strictly speaking, de69e6f6c9 broke './t1234-foo.sh --stress=X
--stress-limit=Y'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the hidden "grep --debug" and "log --grep-debug" options added
in 17bf35a3c7 (grep: teach --debug option to dump the parse tree,
2012-09-13).
At the time these options seem to have been intended to go along with
a documentation discussion and to help the author of relevant tests to
perform ad-hoc debugging on them[1].
Reasons to want this gone:
1. They were never documented, and the only (rather trivial) use of
them in our own codebase for testing is something I removed back
in e01b4dab01 (grep: change non-ASCII -i test to stop using
--debug, 2017-05-20).
2. Googling around doesn't show any in-the-wild uses I could dig up,
and on the Git ML the only mentions after the original discussion
seem to have been when they came up in unrelated diff contexts, or
that test commit of mine.
3. An exception to that is c581e4a749 (grep: under --debug, show
whether PCRE JIT is enabled, 2019-08-18) where we added the
ability to dump out when PCREv2 has the JIT in effect.
The combination of that and my earlier b65abcafc7 (grep: use PCRE
v2 for optimized fixed-string search, 2019-07-01) means Git prints
this out in its most common in-the-wild configuration:
$ git log --grep-debug --grep=foo --grep=bar --grep=baz --all-match
pcre2_jit_on=1
pcre2_jit_on=1
pcre2_jit_on=1
[all-match]
(or
pattern_body<body>foo
(or
pattern_body<body>bar
pattern_body<body>baz
)
)
$ git grep --debug \( -e foo --and -e bar \) --or -e baz
pcre2_jit_on=1
pcre2_jit_on=1
pcre2_jit_on=1
(or
(and
patternfoo
patternbar
)
patternbaz
)
I.e. for each pattern we're considering for the and/or/--all-match
etc. debugging we'll now diligently spew out another identical line
saying whether the PCREv2 JIT is on or not.
I think that nobody's complained about that rather glaringly obviously
bad output says something about how much this is used, i.e. it's
not.
The need for this debugging aid for the composed grep/log patterns
seems to have passed, and the desire to dump the JIT config seems to
have been another one-off around the time we had JIT-related issues on
the PCREv2 codepath. That the original author of this debugging
facility seemingly hasn't noticed the bad output since then[2] is
probably some indicator.
1. https://lore.kernel.org/git/cover.1347615361.git.git@drmicha.warpmail.net/
2. https://lore.kernel.org/git/xmqqk1b8x0ac.fsf@gitster-ct.c.googlers.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an on-disk reverse index exists, there is no need to generate one
in memory. In fact, doing so can be slow, and require large amounts of
the heap.
Let's make sure that we treat the on-disk reverse index with precedence
(i.e., that when it exists, we don't bother trying to generate an
equivalent one in memory) by teaching Git how to conditionally die()
when generating a reverse index in memory.
Then, add a test to ensure that when (a) an on-disk reverse index
exists, and (b) when setting GIT_TEST_REV_INDEX_DIE_IN_MEMORY, that we
do not die, implying that we read from the on-disk one.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new option that unconditionally enables the pack.writeReverseIndex
setting in order to run the whole test suite in a mode that generates
on-disk reverse indexes. Additionally, enable this mode in the second
run of tests under linux-gcc in 'ci/run-build-and-tests.sh'.
Once on-disk reverse indexes are proven out over several releases, we
can change the default value of that configuration to 'true', and drop
this patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next patch, we'll add support for unconditionally enabling the
'pack.writeReverseIndex' setting with a new GIT_TEST_WRITE_REV_INDEX
environment variable.
This causes a little bit of fallout with tests that, for example,
compare the list of files in the pack directory being unprepared to see
.rev files in its output.
Those locations can be cleaned up to look for specific file extensions,
rather than take everything in the pack directory (for instance) and
then grep out unwanted items.
Once the pack.writeReverseIndex option has been thoroughly
tested, we will default it to 'true', removing GIT_TEST_WRITE_REV_INDEX,
and making it possible to revert this patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the pack.writeReverseIndex configuration is respected in both
'git index-pack' and 'git pack-objects' (and therefore, all of their
callers), we can safely advertise it for use in the git-config manual.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have an implementation that can write the new reverse index
format, enable writing a .rev file in 'git pack-objects' by consulting
the pack.writeReverseIndex configuration variable.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach 'git index-pack' to optionally write and verify reverse index with
'--[no-]rev-index', as well as respecting the 'pack.writeReverseIndex'
configuration option.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To derive the filename for a .idx file, 'git index-pack' uses
derive_filename() to strip the '.pack' suffix and add the new suffix.
Prepare for stripping off suffixes other than '.pack' by making the
suffix to strip a parameter of derive_filename(). In order to make this
consistent with the "suffix" parameter which does not begin with a ".",
an additional check in derive_filename.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch prepares for callers to be able to write reverse index files
to disk.
It adds the necessary machinery to write a format-compliant .rev file
from within 'write_rev_file()', which is called from
'finish_tmp_packfile()'.
Similar to the process by which the reverse index is computed in memory,
these new paths also have to sort a list of objects by their offsets
within a packfile. These new paths use a qsort() (as opposed to a radix
sort), since our specialized radix sort requires a full revindex_entry
struct per object, which is more memory than we need to allocate.
The qsort is obviously slower, but the theoretical slowdown would
require a repository with a large amount of objects, likely implying
that the time spent in, say, pack-objects during a repack would dominate
the overall runtime.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Specify the format of the on-disk reverse index 'pack-*.rev' file, as
well as prepare the code for the existence of such files.
The reverse index maps from pack relative positions (i.e., an index into
the array of object which is sorted by their offsets within the
packfile) to their position within the 'pack-*.idx' file. Today, this is
done by building up a list of (off_t, uint32_t) tuples for each object
(the off_t corresponding to that object's offset, and the uint32_t
corresponding to its position in the index). To convert between pack and
index position quickly, this array of tuples is radix sorted based on
its offset.
This has two major drawbacks:
First, the in-memory cost scales linearly with the number of objects in
a pack. Each 'struct revindex_entry' is sizeof(off_t) +
sizeof(uint32_t) + padding bytes for a total of 16.
To observe this, force Git to load the reverse index by, for e.g.,
running 'git cat-file --batch-check="%(objectsize:disk)"'. When asking
for a single object in a fresh clone of the kernel, Git needs to
allocate 120+ MB of memory in order to hold the reverse index in memory.
Second, the cost to sort also scales with the size of the pack.
Luckily, this is a linear function since 'load_pack_revindex()' uses a
radix sort, but this cost still must be paid once per pack per process.
As an example, it takes ~60x longer to print the _size_ of an object as
it does to print that entire object's _contents_:
Benchmark #1: git.compile cat-file --batch <obj
Time (mean ± σ): 3.4 ms ± 0.1 ms [User: 3.3 ms, System: 2.1 ms]
Range (min … max): 3.2 ms … 3.7 ms 726 runs
Benchmark #2: git.compile cat-file --batch-check="%(objectsize:disk)" <obj
Time (mean ± σ): 210.3 ms ± 8.9 ms [User: 188.2 ms, System: 23.2 ms]
Range (min … max): 193.7 ms … 224.4 ms 13 runs
Instead, avoid computing and sorting the revindex once per process by
writing it to a file when the pack itself is generated.
The format is relatively straightforward. It contains an array of
uint32_t's, the length of which is equal to the number of objects in the
pack. The ith entry in this table contains the index position of the
ith object in the pack, where "ith object in the pack" is determined by
pack offset.
One thing that the on-disk format does _not_ contain is the full (up to)
eight-byte offset corresponding to each object. This is something that
the in-memory revindex contains (it stores an off_t in 'struct
revindex_entry' along with the same uint32_t that the on-disk format
has). Omit it in the on-disk format, since knowing the index position
for some object is sufficient to get a constant-time lookup in the
pack-*.idx file to ask for an object's offset within the pack.
This trades off between the on-disk size of the 'pack-*.rev' file for
runtime to chase down the offset for some object. Even though the lookup
is constant time, the constant is heavier, since it can potentially
involve two pointer walks in v2 indexes (one to access the 4-byte offset
table, and potentially a second to access the double wide offset table).
Consider trying to map an object's pack offset to a relative position
within that pack. In a cold-cache scenario, more page faults occur while
switching between binary searching through the reverse index and
searching through the *.idx file for an object's offset. Sure enough,
with a cold cache (writing '3' into '/proc/sys/vm/drop_caches' after
'sync'ing), printing out the entire object's contents is still
marginally faster than printing its size:
Benchmark #1: git.compile cat-file --batch-check="%(objectsize:disk)" <obj >/dev/null
Time (mean ± σ): 22.6 ms ± 0.5 ms [User: 2.4 ms, System: 7.9 ms]
Range (min … max): 21.4 ms … 23.5 ms 41 runs
Benchmark #2: git.compile cat-file --batch <obj >/dev/null
Time (mean ± σ): 17.2 ms ± 0.7 ms [User: 2.8 ms, System: 5.5 ms]
Range (min … max): 15.6 ms … 18.2 ms 45 runs
(Numbers taken in the kernel after cheating and using the next patch to
generate a reverse index). There are a couple of approaches to improve
cold cache performance not pursued here:
- We could include the object offsets in the reverse index format.
Predictably, this does result in fewer page faults, but it triples
the size of the file, while simultaneously duplicating a ton of data
already available in the .idx file. (This was the original way I
implemented the format, and it did show
`--batch-check='%(objectsize:disk)'` winning out against `--batch`.)
On the other hand, this increase in size also results in a large
block-cache footprint, which could potentially hurt other workloads.
- We could store the mapping from pack to index position in more
cache-friendly way, like constructing a binary search tree from the
table and writing the values in breadth-first order. This would
result in much better locality, but the price you pay is trading
O(1) lookup in 'pack_pos_to_index()' for an O(log n) one (since you
can no longer directly index the table).
So, neither of these approaches are taken here. (Thankfully, the format
is versioned, so we are free to pursue these in the future.) But, cold
cache performance likely isn't interesting outside of one-off cases like
asking for the size of an object directly. In real-world usage, Git is
often performing many operations in the revindex (i.e., asking about
many objects rather than a single one).
The trade-off is worth it, since we will avoid the vast majority of the
cost of generating the revindex that the extra pointer chase will look
like noise in the following patch's benchmarks.
This patch describes the format and prepares callers (like in
pack-revindex.c) to be able to read *.rev files once they exist. An
implementation of the writer will appear in the next patch, and callers
will gradually begin to start using the writer in the patches that
follow after that.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Abstract accesses to in-core revindex that allows enumerating
objects stored in a packfile in the order they appear in the pack,
in preparation for introducing an on-disk precomputed revindex.
* tb/pack-revindex-api: (21 commits)
for_each_object_in_pack(): clarify pack vs index ordering
pack-revindex.c: avoid direct revindex access in 'offset_to_pack_pos()'
pack-revindex: hide the definition of 'revindex_entry'
pack-revindex: remove unused 'find_revindex_position()'
pack-revindex: remove unused 'find_pack_revindex()'
builtin/gc.c: guess the size of the revindex
for_each_object_in_pack(): convert to new revindex API
unpack_entry(): convert to new revindex API
packed_object_info(): convert to new revindex API
retry_bad_packed_offset(): convert to new revindex API
get_delta_base_oid(): convert to new revindex API
rebuild_existing_bitmaps(): convert to new revindex API
try_partial_reuse(): convert to new revindex API
get_size_by_pos(): convert to new revindex API
show_objects_for_type(): convert to new revindex API
bitmap_position_packfile(): convert to new revindex API
check_object(): convert to new revindex API
write_reused_pack_verbatim(): convert to new revindex API
write_reused_pack_one(): convert to new revindex API
write_reuse_object(): convert to new revindex API
...
Update the Code-of-conduct to version 2.0 from the upstream (we've
been using version 1.4).
* ab/coc-update-to-2.0:
CoC: update to version 2.0 + local changes
CoC: explicitly take any whitespace breakage
CoC: Update word-wrapping to match upstream
Introduce two new ways to feed configuration variable-value pairs
via environment variables, and tweak the way GIT_CONFIG_PARAMETERS
encodes variable/value pairs to make it more robust.
* ps/config-env-pairs:
config: allow specifying config entries via envvar pairs
environment: make `getenv_safe()` a public function
config: store "git -c" variables using more robust format
config: parse more robust format in GIT_CONFIG_PARAMETERS
config: extract function to parse config pairs
quote: make sq_dequote_step() a public function
config: add new way to pass config via `--config-env`
git: add `--super-prefix` to usage string
A bit of code refactoring.
* cc/write-promisor-file:
pack-write: die on error in write_promisor_file()
fetch-pack: refactor writing promisor file
fetch-pack: rename helper to create_promisor_file()
"git bundle" learns "--stdin" option to read its refs from the
standard input. Also, it now does not lose refs whey they point
at the same object.
* jx/bundle:
bundle: arguments can be read from stdin
bundle: lost objects when removing duplicate pendings
test: add helper functions for git-bundle
Clean-up docs, codepaths and tests around mailmap.
* ab/mailmap: (22 commits)
shortlog: remove unused(?) "repo-abbrev" feature
mailmap doc + tests: document and test for case-insensitivity
mailmap tests: add tests for empty "<>" syntax
mailmap tests: add tests for whitespace syntax
mailmap tests: add a test for comment syntax
mailmap doc + tests: add better examples & test them
tests: refactor a few tests to use "test_commit --append"
test-lib functions: add an --append option to test_commit
test-lib functions: add --author support to test_commit
test-lib functions: document arguments to test_commit
test-lib functions: expand "test_commit" comment template
mailmap: test for silent exiting on missing file/blob
mailmap tests: get rid of overly complex blame fuzzing
mailmap tests: add a test for "not a blob" error
mailmap tests: remove redundant entry in test
mailmap tests: improve --stdin tests
mailmap tests: modernize syntax & test idioms
mailmap tests: use our preferred whitespace syntax
mailmap doc: start by mentioning the comment syntax
check-mailmap doc: note config options
...
"git fetch" learns to treat ref updates atomically in all-or-none
fashion, just like "git push" does, with the new "--atomic" option.
* ps/fetch-atomic:
fetch: implement support for atomic reference updates
fetch: allow passing a transaction to `s_update_ref()`
fetch: refactor `s_update_ref` to use common exit path
fetch: use strbuf to format FETCH_HEAD updates
fetch: extract writing to FETCH_HEAD
When more than one commit with the same patch ID appears on one
side, "git log --cherry-pick A...B" did not exclude them all when a
commit with the same patch ID appears on the other side. Now it
does.
* jk/log-cherry-pick-duplicate-patches:
patch-ids: handle duplicate hashmap entries
Prepare tests not to be affected by the name of the default branch
"git init" creates.
* js/default-branch-name-tests-final-stretch: (28 commits)
tests: drop prereq `PREPARE_FOR_MAIN_BRANCH` where no longer needed
t99*: adjust the references to the default branch name "main"
tests(git-p4): transition to the default branch name `main`
t9[5-7]*: adjust the references to the default branch name "main"
t9[0-4]*: adjust the references to the default branch name "main"
t8*: adjust the references to the default branch name "main"
t7[5-9]*: adjust the references to the default branch name "main"
t7[0-4]*: adjust the references to the default branch name "main"
t6[4-9]*: adjust the references to the default branch name "main"
t64*: preemptively adjust alignment to prepare for `master` -> `main`
t6[0-3]*: adjust the references to the default branch name "main"
t5[6-9]*: adjust the references to the default branch name "main"
t55[4-9]*: adjust the references to the default branch name "main"
t55[23]*: adjust the references to the default branch name "main"
t551*: adjust the references to the default branch name "main"
t550*: adjust the references to the default branch name "main"
t5503: prepare aligned comment for replacing `master` with `main`
t5[0-4]*: adjust the references to the default branch name "main"
t5323: prepare centered comment for `master` -> `main`
t4*: adjust the references to the default branch name "main"
...
After expiring a reflog and making a single commit, the reflog for
the branch would record a single entry that knows both @{0} and
@{1}, but we failed to answer "what commit were we on?", i.e. @{1}
* dl/reflog-with-single-entry:
refs: allow @{n} to work with n-sized reflog
refs: factor out set_read_ref_cutoffs()
"git diff" showed a submodule working tree with untracked cruft as
"Submodule commit <objectname>-dirty", but a natural expectation is
that the "-dirty" indicator would align with "git describe --dirty",
which does not consider having untracked files in the working tree
as source of dirtiness. The inconsistency has been fixed.
* sj/untracked-files-in-submodule-directory-is-not-dirty:
diff: do not show submodule with untracked files as "-dirty"
Warn loudly when the "pack-redundant" command, which has been left
stale with almost unusable performance issues, gets used, as we no
longer want to recommend its use (instead just "repack -d" instead).
* jc/deprecate-pack-redundant:
pack-redundant: gauge the usage before proposing its removal
Newline characters in the host and path part of git:// URL are
now forbidden.
* jk/forbid-lf-in-git-url:
fsck: reject .gitmodules git:// urls with newlines
git_connect_git(): forbid newlines in host and path
The implementation of "git branch --sort" wrt the detached HEAD
display has always been hacky, which has been cleaned up.
* ab/branch-sort:
branch: show "HEAD detached" first under reverse sort
branch: sort detached HEAD based on a flag
ref-filter: move ref_sorting flags to a bitfield
ref-filter: move "cmp_fn" assignment into "else if" arm
ref-filter: add braces to if/else if/else chain
branch tests: add to --sort tests
branch: change "--local" to "--list" in comment
File-level rename detection updates.
* en/diffcore-rename:
diffcore-rename: remove unnecessary duplicate entry checks
diffcore-rename: accelerate rename_dst setup
diffcore-rename: simplify and accelerate register_rename_src()
t4058: explore duplicate tree entry handling in a bit more detail
t4058: add more tests and documentation for duplicate tree entry handling
diffcore-rename: reduce jumpiness in progress counters
diffcore-rename: simplify limit check
diffcore-rename: avoid usage of global in too_many_rename_candidates()
diffcore-rename: rename num_create to num_destinations
Rename detection is added to the "ORT" merge strategy.
* en/merge-ort-3:
merge-ort: add implementation of type-changed rename handling
merge-ort: add implementation of normal rename handling
merge-ort: add implementation of rename collisions
merge-ort: add implementation of rename/delete conflicts
merge-ort: add implementation of both sides renaming differently
merge-ort: add implementation of both sides renaming identically
merge-ort: add basic outline for process_renames()
merge-ort: implement compare_pairs() and collect_renames()
merge-ort: implement detect_regular_renames()
merge-ort: add initial outline for basic rename detection
merge-ort: add basic data structures for handling renames
"git mktag" validates its input using its own rules before writing
a tag object---it has been updated to share the logic with "git
fsck".
* ab/mktag: (23 commits)
mktag: add a --[no-]strict option
mktag: mark strings for translation
mktag: convert to parse-options
mktag: allow omitting the header/body \n separator
mktag: allow turning off fsck.extraHeaderEntry
fsck: make fsck_config() re-usable
mktag: use fsck instead of custom verify_tag()
mktag: use puts(str) instead of printf("%s\n", str)
mktag: remove redundant braces in one-line body "if"
mktag: use default strbuf_read() hint
mktag tests: test verify_object() with replaced objects
mktag tests: improve verify_object() test coverage
mktag tests: test "hash-object" compatibility
mktag tests: stress test whitespace handling
mktag tests: run "fsck" after creating "mytag"
mktag tests: don't create "mytag" twice
mktag tests: don't redirect stderr to a file needlessly
mktag tests: remove needless SHA-1 hardcoding
mktag tests: use "test_commit" helper
mktag tests: don't needlessly use a subshell
...
Improve the support for invalid UTF-8 haystacks given a non-ASCII
needle when using the PCREv2 backend.
This is a more complete fix for a bug I started to fix in
870eea8166 (grep: do not enter PCRE2_UTF mode on fixed matching,
2019-07-26), now that PCREv2 has the PCRE2_MATCH_INVALID_UTF mode we
can make use of it.
This fixes the sort of case described in 8a5999838e (grep: stess test
PCRE v2 on invalid UTF-8 data, 2019-07-26), i.e.:
- The subject string is non-ASCII (e.g. "ævar")
- We're under a is_utf8_locale(), e.g. "en_US.UTF-8", not "C"
- We are using --ignore-case, or we're a non-fixed pattern
If those conditions were satisfied and we matched found non-valid
UTF-8 data PCREv2 might bark on it, in practice this only happened
under the JIT backend (turned on by default on most platforms).
Ultimately this fixes a "regression" in b65abcafc7 ("grep: use PCRE v2
for optimized fixed-string search", 2019-07-01), I'm putting that in
scare-quotes because before then we wouldn't properly support these
complex case-folding, locale etc. cases either, it just broke in
different ways.
There was a bug related to this the PCRE2_NO_START_OPTIMIZE flag fixed
in PCREv2 10.36. It can be worked around by setting the
PCRE2_NO_START_OPTIMIZE flag. Let's do that in those cases, and add
tests for the bug.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in [1] when I originally added this test in [2] the test was
completely broken as it lacked a redirect[3]. I now think this whole
thing is overly fragile. Let's only test if we have a segfault here.
Before this the first test's "test_cmp" was pretty meaningless. We
were only testing if PCREv2 was so broken that it would spew out
something completely unrelated on stdout, which isn't very plausible.
In the second test we're relying on PCREv2 forever holding to the
current behavior of the PCRE_UTF8 flag, as opposed to learning some
optimistic graceful fallback to PCRE2_MATCH_INVALID_UTF in the
future. If that happens having this test broken under bisecting would
suck.
A follow-up commit will actually test this case in a meaningful way
under the PCRE2_MATCH_INVALID_UTF flag. Let's run this one
unconditionally, and just make sure we don't segfault.
1. e714b898c6 (t7812: expect failure for grep -i with invalid UTF-8
data, 2019-11-29)
2. 8a5999838e (grep: stess test PCRE v2 on invalid UTF-8 data,
2019-07-26)
3. c74b3cbb83 (t7812: add missing redirects, 2019-11-26)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some timing instrumentation for both merge-ort and diffcore-rename;
I used these to measure and optimize performance in both, and several
future patch series will build on these to reduce the timings of some
select testcases.
=== Setup ===
The primary testcase I used involved rebasing a random topic in the
linux kernel (consisting of 35 patches) against an older version. I
added two variants, one where I rename a toplevel directory, and another
where I only rebase one patch instead of the whole topic. The setup is
as follows:
$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
$ git branch hwmon-updates fd8bdb23b91876ac1e624337bb88dc1dcc21d67e
$ git branch hwmon-just-one fd8bdb23b91876ac1e624337bb88dc1dcc21d67e~34
$ git branch base 4703d9119972bf586d2cca76ec6438f819ffa30e
$ git switch -c 5.4-renames v5.4
$ git mv drivers pilots # Introduce over 26,000 renames
$ git commit -m "Rename drivers/ to pilots/"
$ git config merge.renameLimit 30000
$ git config merge.directoryRenames true
=== Testcases ===
Now with REBASE standing for either "git rebase [--merge]" (using
merge-recursive) or "test-tool fast-rebase" (using merge-ort), the
testcases are:
Testcase #1: no-renames
$ git checkout v5.4^0
$ REBASE --onto HEAD base hwmon-updates
Note: technically the name is misleading; there are some renames, but
very few. Rename detection only takes about half the overall time.
Testcase #2: mega-renames
$ git checkout 5.4-renames^0
$ REBASE --onto HEAD base hwmon-updates
Testcase #3: just-one-mega
$ git checkout 5.4-renames^0
$ REBASE --onto HEAD base hwmon-just-one
=== Timing results ===
Overall timings, using hyperfine (1 warmup run, 3 runs for mega-renames,
10 runs for the other two cases):
merge-recursive merge-ort
no-renames: 18.912 s ± 0.174 s 14.263 s ± 0.053 s
mega-renames: 5964.031 s ± 10.459 s 5504.231 s ± 5.150 s
just-one-mega: 149.583 s ± 0.751 s 158.534 s ± 0.498 s
A single re-run of each with some breakdowns:
--- no-renames ---
merge-recursive merge-ort
overall runtime: 19.302 s 14.257 s
inexact rename detection: 7.603 s 7.906 s
everything else: 11.699 s 6.351 s
--- mega-renames ---
merge-recursive merge-ort
overall runtime: 5950.195 s 5499.672 s
inexact rename detection: 5746.309 s 5487.120 s
everything else: 203.886 s 17.552 s
--- just-one-mega ---
merge-recursive merge-ort
overall runtime: 151.001 s 158.582 s
inexact rename detection: 143.448 s 157.835 s
everything else: 7.553 s 0.747 s
=== Timing observations ===
0) Maximum speedup
The "everything else" row represents the maximum speedup we could
achieve if we were to somehow infinitely parallelize inexact rename
detection, but leave everything else alone. The fact that this is so
much smaller than the real runtime (even in the case with virtually no
renames) makes it clear just how overwhelmingly large the time spent on
rename detection can be.
1) no-renames
1a) merge-ort is faster than merge-recursive, which is nice. However,
this still should not be considered good enough. Although the "merge"
backend to rebase (merge-recursive) is sometimes faster than the "apply"
backend, this is one of those cases where it is not. In fact, even
merge-ort is slower. The "apply" backend can complete this testcase in
6.940 s ± 0.485 s
which is about 2x faster than merge-ort and 3x faster than
merge-recursive. One goal of the merge-ort performance work will be to
make it faster than git-am on this (and similar) testcases.
2) mega-renames
2a) Obviously rename detection is a huge cost; it's where most the time
is spent. We need to cut that down. If we could somehow infinitely
parallelize it and drive its time to 0, the merge-recursive time would
drop to about 204s, and the merge-ort time would drop to about 17s. I
think this particular stat shows I've subtly baked a couple performance
improvements into merge-ort and into fast-rebase already.
3) just-one-mega
3a) not much to say here, it just gives some flavor for how rebasing
only one patch compares to rebasing 35.
=== Goals ===
This patch is obviously just the beginning. Here are some of my goals
that this measurement will help us achieve:
* Drive the cost of rename detection down considerably for merges
* After the above has been achieved, see if there are other slowness
factors (which would have previously been overshadowed by rename
detection costs) which we can then focus on and also optimize.
* Ensure our rebase testcase that requires little rename detection
is noticeably faster with merge-ort than with apply-based rebase.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Taylor Blau <ttaylorr@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_provisional_directory_renames() has code to detect directories being
evenly split between different locations. However, as noted previously,
if there are no new files added to that directory that was split evenly,
our inability to determine where the directory was renamed to doesn't
matter since there are no new files to try to move into the new
location. Unfortunately, that code is unaware of whether there are new
files under the directory in question and we just ignore that, causing
us to fail t6423 test 2b but pass test 2a; turn off the error for now,
swapping which tests pass and fail.
The motivating reason for switching this off as a temporary measure is
that as we add optimizations, we'll start looking at only subsets of
renames, and subsets of renames can start switching the result we get
when this error is (wrongly) on. Once we get enough optimizations,
however, we can prevent that code from even running when there are no
new files added to the relevant directory, at which point we can revert
this commit and then both testcases 2a and 2b will pass simultaneously.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a series of merges was performed (such as for a rebase or series of
cherry-picks), only the data structures allocated by the final merge
operation were being freed. The problem was that while picking out
pieces of merge-ort to upstream, I previously misread a certain section
of merge_start() and assumed it was associated with a later
optimization. Include that section now, which ensures that if there was
a previous merge operation, that we clear out result->priv and then
re-use it for opt->priv, and otherwise we allocate opt->priv.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove support for using version 1 of the PCRE library. Its use has
been discouraged by upstream for a long time, and it's in a
bugfix-only state.
Anyone who was relying on v1 in particular got a nudge to move to v2
in e6c531b808 (Makefile: make USE_LIBPCRE=YesPlease mean v2, not v1,
2018-03-11), which was first released as part of v2.18.0.
With this the LIBPCRE2 test prerequisites is redundant to PCRE. But
I'm keeping it for self-documentation purposes, and to avoid conflict
with other in-flight PCRE patches.
I'm also not changing all of our own "pcre2" names to "pcre", i.e. the
inverse of 6d4b5747f0 (grep: change internal *pcre* variable &
function names to be *pcre1*, 2017-05-25). I don't see the point, and
it makes the history/blame harder to read. Maybe if there's ever a
PCRE v3...
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a flag added in my fb95e2e38d (grep: un-break building with
PCRE >= 8.32 without --enable-jit, 2017-06-01). It's set just below
USE_LIBPCRE=YesPlease, so it's been redundant since
e6c531b808 (Makefile: make USE_LIBPCRE=YesPlease mean v2, not v1,
2018-03-11).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These also document some behaviors that differ from a full checkout, and
possibly in a way that is not intended.
The test is designed to be run with "--run=1,X" where 'X' is an
interesting test case. Each test uses 'init_repos' to reset the full and
sparse copies of the initial-repo that is created by the first test
case. This also makes it possible to have test cases leave the working
directory or index in unusual states without disturbing later cases.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From ff15d509b89edd4830d85d53cea3079a6b0c1c08 Mon Sep 17 00:00:00 2001
From: Derrick Stolee <dstolee@microsoft.com>
Date: Mon, 11 Jan 2021 08:53:09 -0500
Subject: [PATCH 8/9] test-lib: test_region looks for trace2 regions
Most test cases can verify Git's behavior using input/output
expectations or changes to the .git directory. However, sometimes we
want to check that Git did or did not run a certain section of code.
This is particularly important for performance-only features that we
want to ensure have been enabled in certain cases.
Add a new 'test_region' function that checks if a trace2 region was
entered and left in a given trace2 event log.
There is one existing test (t0500-progress-display.sh) that performs
this check already, so use the helper function instead. Note that this
changes the expectations slightly. The old test (incorrectly) used two
patterns for the 'grep' invocation, but this performs an OR of the
patterns, not an AND. This means that as long as one region_enter event
was logged, the test would succeed, even if it was not due to the
progress category.
More uses will be added in a later change.
t6423-merge-rename-directories.sh also greps for region_enter lines, but
it verifies the number of such lines, which is not the same as an
existence check.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future feature will want to load the sparse-checkout patterns into a
pattern_list, but the current mechanism to do so is a bit complicated.
This is made difficult due to needing to find the sparse-checkout file
in different ways throughout the codebase.
The logic implemented in the new get_sparse_checkout_patterns() was
duplicated in populate_from_existing_patterns() in unpack-trees.c. Use
the new method instead, keeping the logic around handling the struct
unpack_trees_options.
The callers to get_sparse_checkout_filename() in
builtin/sparse-checkout.c manipulate the sparse-checkout file directly,
so it is not appropriate to replace logic in that file with
get_sparse_checkout_patterns().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The lazy_init_name_hash() populates a hashset with all filenames and
another with all directories represented in the index. This is run only
if we need to use the hashsets to check for existence or case-folding
renames.
Place trace2 regions where there is already a performance trace.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It will be helpful to add behavior to index operations that might
trigger an object lookup. Since each index belongs to a specific
repository, add a 'repo' pointer to struct index_state that allows
access to this repository.
Add a BUG() statement if the repo already has an index, and the index
already has a repo, but somehow the index points to a different repo.
This will prevent future changes from needing to pass an additional
'struct repository *repo' parameter and instead rely only on the 'struct
index_state *istate' parameter.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The index has an fsmonitor_dirty bitmap that records which index entries
are "dirty" based on the response from the FSMonitor. If this bitmap
ever grows larger than the index, then there was an error in how it was
constructed, and it was probably a developer's bug.
There are several BUG() statements that are very similar, so replace
these uses with a simpler assert_index_minimum(). Since there is one
caller that uses a custom 'pos' value instead of the bit_size member, we
cannot simplify it too much. However, the error string is identical in
each, so this simplifies things.
Be sure to add one when checking if a position if valid, since the
minimum is a bound on the expected size.
The end result is that the code is simpler to read while also preserving
these assertions for developers in the FSMonitor space.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This method will be helpful to use outside of cache-tree.c in a later
feature. The implementation is subtle due to subtree_name_cmp() sorting
by length and then lexicographically.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The verify_cache() method takes an array of cache entries and a count,
but these are always provided directly from a struct index_state. Use
a pointer to the full structure instead.
There is a subtle point when istate->cache_nr is zero that subtracting
one will underflow. This triggers a failure in t0000-basic.sh, among
others. Use "i + 1 < istate->cache_nr" to avoid these strange
comparisons. Convert i to be unsigned as well, which also removes the
potential signed overflow in the unlikely case that cache_nr is over 2.1
billion entries. The 'funny' variable has a maximum value of 11, so
making it unsigned does not change anything of importance.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the method safer by allocating a cache_tree member for the given
index_state if it is not already present. This is preferrable to a
BUG() statement or returning with an error because future callers will
want to populate an empty cache-tree using this method.
Callers can also remove their conditional allocations of cache_tree.
Also drop local variables that can be found directly from the 'istate'
parameter.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a test initially added in 50cd31c652 (t3600: comment on
inducing SIGPIPE in `git rm`, 2019-11-27) to explicitly test for
SIGPIPE using a pattern initially established in 7559a1be8a (unblock
and unignore SIGPIPE, 2014-09-18).
The problem with using that pattern is that it requires us to skip the
test on MINGW[1]. If we kept the test with its initial semantics[2]
we'd get coverage there, at the cost of not checking whether we
actually had SIGPIPE outside of MinGW.
Arguably we should just remove this test. Between the test added in
7559a1be8a and the change made in 12e0437f23 (common-main: call
restore_sigpipe_to_default(), 2016-07-01) it's a bit arbitrary to only
check this for "git rm".
But in lieu of having wider test coverage for other "git" subcommands
let's refactor this to explicitly test for SIGPIPE outside of MinGW,
and then just that we remove the ".git/index.lock" (as before) on all
platforms.
1. https://lore.kernel.org/git/xmqq1rec5ckf.fsf@gitster.c.googlers.com/
2. 0693f9ddad (Make sure lockfiles are unlocked when dying on SIGPIPE,
2008-12-18)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change an invocation of zipinfo added in 19ee29401d (t5004: test ZIP
archives with many entries, 2015-08-22) to simply ask zipinfo for the
header info, rather than spewing out info about the entire archive and
race to kill it with SIGPIPE due to the downstream "head -2".
I ran across this because I'm adding a "set -o pipefail" test
mode. This won't be needed for the version of the mode that I'm
introducing (which currently relies on a patch to GNU bash), but I
think this is a good idea anyway.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continue changing a test that 763b47bafa (t5703: stop losing return
codes of git commands, 2019-11-27) already refactored.
This was originally added as part of a series to add support for
running under bash's "set -o pipefail", under that mode this test will
fail because sometimes there's no commits in the "objs" output.
It's easier to fix that than exempt these tests under a hypothetical
"set -o pipefail" test mode. It looks like we probably won't have
that, but once we've dug this code up let's refactor it[2] so we don't
hide a potential pipe failure.
1. https://lore.kernel.org/git/xmqqzh18o8o6.fsf@gitster.c.googlers.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite a brittle tests which used "rev-list" without "--[no-]merges"
to figure out if a set of commits turned into merge commits or not.
Signed-off-by: Jeff King <peff@peff.net>
[ÆAB: wrote commit message]
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor some old-style test code to use test_must_be_empty instead of
"test -z". This makes a follow-up commit easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "<file" instead of "< file", and don't put the closing quote for
strings on an indented line. This makes a follow-up refactoring commit
easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test code added in 9c4d6c0297 (cache-tree: Write updated
cache-tree after commit, 2014-07-13) used "ls-files" in lieu of
"ls-tree" because it wanted to test the data in the index, since this
test is testing the cache-tree extension.
Change the test to instead use "ls-tree" for traversal, and then
explicitly check how HEAD differs from the index. This is more easily
understood, and less fragile as numerous past bug fixes[1][2][3] to
the old code we're replacing demonstrate.
As an aside this would be a bit easier if empty pathspecs hadn't been
made an error in d426430e6e (pathspec: warn on empty strings as
pathspec, 2016-06-22) and 9e4e8a64c2 (pathspec: die on empty strings
as pathspec, 2017-06-06).
If that was still allowed this code could be simplified slightly:
diff --git a/t/t0090-cache-tree.sh b/t/t0090-cache-tree.sh
index 9bf66c9e68..0b02881f55 100755
--- a/t/t0090-cache-tree.sh
+++ b/t/t0090-cache-tree.sh
@@ -18,19 +18,18 @@ cmp_cache_tree () {
# test-tool dump-cache-tree already verifies that all existing data is
# correct.
generate_expected_cache_tree () {
- pathspec="$1" &&
- dir="$2${2:+/}" &&
+ pathspec="$1${1:+/}" &&
git ls-tree --name-only HEAD -- "$pathspec" >files &&
git ls-tree --name-only -d HEAD -- "$pathspec" >subtrees &&
- printf "SHA %s (%d entries, %d subtrees)\n" "$dir" $(wc -l <files) $(wc -l <subtrees) &&
+ printf "SHA %s (%d entries, %d subtrees)\n" "$pathspec" $(wc -l <files) $(wc -l <subtrees) &&
while read subtree
do
- generate_expected_cache_tree "$pathspec/$subtree/" "$subtree" || return 1
+ generate_expected_cache_tree "$subtree" || return 1
done <subtrees
}
test_cache_tree () {
- generate_expected_cache_tree "." >expect &&
+ generate_expected_cache_tree >expect &&
cmp_cache_tree expect &&
rm expect actual files subtrees &&
git status --porcelain -- ':!status' ':!expected.status' >status &&
1. c8db708d5d (t0090: avoid passing empty string to printf %d,
2014-09-30)
2. d69360c6b1 (t0090: tweak awk statement for Solaris
/usr/xpg4/bin/awk, 2014-12-22)
3. 9b5a9fa60a (t0090: stop losing return codes of git commands,
2019-11-27)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the $2 paramater. This appears to have been some
work-in-progress code from an earlier version of
9c4d6c0297 (cache-tree: Write updated cache-tree after commit,
2014-07-13) which was left in the final version.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the cache-tree test file to use our current recommended
patterns. This makes a subsequent meaningful change easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During a merge conflict, the name of a file may appear multiple
times in "git ls-files" output, once for each stage. If you use
both `--delete` and `--modify` at the same time, the output may
mention a deleted file twice.
When none of the '-t', '-u', or '-s' options is in use, these
duplicate entries do not add much value to the output.
Introduce a new '--deduplicate' option to suppress them.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
[jc: extended doc and rewritten commit log]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will make it easier to show only one entry per filename in the
next step.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
[jc: corrected the log message]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This situation may occur in the original code: lstat() failed
but we use `&st` to feed ie_modified() later.
Therefore, we can directly execute show_ce without the judgment of
ie_modified() when lstat() has failed.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
[jc: fixed misindented code]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-refs performs a single revision walk over the whole ref namespace,
and sends ones that match with one of the given ref prefixes down to the
user.
This can be expensive if there are many refs overall, but the portion of
them covered by the given prefixes is small by comparison.
To attempt to reduce the difference between the number of refs
traversed, and the number of refs sent, only traverse references which
are in the longest common prefix of the given prefixes. This is very
reminiscent of the approach taken in b31e2680c4 (ref-filter.c: find
disjoint pattern prefixes, 2019-06-26) which does an analogous thing for
multi-patterned 'git for-each-ref' invocations.
The callback 'send_ref' is resilient to ignore extra patterns by
discarding any arguments which do not begin with at least one of the
specified prefixes.
Similarly, the code introduced in b31e2680c4 is resilient to stop early
at metacharacters, but we only pass strict prefixes here. At worst we
would return too many results, but the double checking done by send_ref
will throw away anything that doesn't start with something in the prefix
list.
Finally, if no prefixes were provided, then implicitly add the empty
string (which will match all references) since this matches the existing
behavior (see the "no restrictions" comment in "ls-refs.c:ref_match()").
Original-patch-by: Jacob Vosmaer <jacob@gitlab.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correctly initialize the "prefixes" strvec using strvec_init() instead
of simply zeroing it via the earlier memset().
There's no way to trigger a crash, since the first 'ref-prefix' command
will initialize the strvec via the 'ALLOC_GROW' in 'strvec_push_nodup()'
(the alloc and nr variables are already zero'd, so the call to
ALLOC_GROW is valid).
If no "ref-prefix" command was given, then the call to
'ls-refs.c:ref_match()' will abort early after it reads the zero in
'prefixes->nr'. Likewise, strvec_clear() will only call free() on the
array, which is NULL, so we're safe there, too.
But, all of this is dangerous and requires more reasoning than it would
if we simply called 'strvec_init()', so do that.
Signed-off-by: Jacob Vosmaer <jacob@gitlab.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function was used in the ref-filter.c code to find the longest
common prefix of among a set of refspecs, and then to iterate all of the
references that descend from that prefix.
A future patch will want to use that same code from ls-refs.c, so
prepare by exposing and moving it to refs.c. Since there is nothing
specific to the ref-filter code here (other than that it was previously
the only caller of this function), this really belongs in the more
generic refs.h header.
The code moved in this patch is identical before and after, with the one
exception of renaming some arguments to be consistent with other
functions exposed in refs.h.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git-pack-objects, we iterate over all the tags if the --include-tag
option is passed on the command line. For some reason this uses
for_each_ref which is expensive if the repo has many refs. We should
use for_each_tag_ref instead.
Because the add_ref_tag callback will now only visit tags we
simplified it a bit.
The motivation for this change is that we observed performance issues
with a repository on gitlab.com that has 500,000 refs but only 2,000
tags. The fetch traffic on that repo is dominated by CI, and when we
changed CI to fetch with 'git fetch --no-tags' we saw a dramatic
change in the CPU profile of git-pack-objects. This lead us to this
particular ref walk. More details in:
https://gitlab.com/gitlab-com/gl-infra/scalability/-/issues/746#note_483546598
Signed-off-by: Jacob Vosmaer <jacob@gitlab.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's unclear how run-command's use_shell option should impact the
arguments fed to a command. Plausibly it could mean that we glue all of
the arguments together into a string to pass to the shell, in which case
that opens the question of whether the caller needs to quote them.
But in fact we don't implement it that way (and even if we did, we'd
probably auto-quote the arguments as part of the glue step). And we must
not receive quoted arguments, because we might actually optimize out the
shell entirely (i.e., the caller does not even know if a shell will be
involved in the end or not).
Since this ambiguity may have been the cause of a recent bug, let's
document the option a bit.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new helper 'test_cmp_refs' to check references in a repository.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER reported that t5411 failed in Travis CI's s390x environment a
couple of times, and could be reproduced with '--stress' test on this
specific environment. The test failure messages might look like this:
+ test_cmp expect actual
--- expect 2021-01-17 21:55:23.430750004 +0000
+++ actual 2021-01-17 21:55:23.430750004 +0000
@@ -1 +1 @@
-<COMMIT-A> refs/heads/main
+<COMMIT-A> refs/heads/maifatal: the remote end hung up unexpectedly
error: last command exited with $?=1
not ok 86 - proc-receive: not support push options (builtin protocol)
The file 'actual' is filtered from the file 'out' which contains result
of 'git show-ref' command. Due to the error messages from other process
is written into the file 'out' accidentally, t5411 failed. SZEDER finds
the root cause of this issue:
- 'git push' is executed with its standard output and error redirected
to the file 'out'.
- 'git push' executes 'git receive-pack' internally, which inherits
the open file descriptors, so its output and error goes into that
same 'out' file.
- 'git push' ends without waiting for the close of 'git-receive-pack'
for some cases, and the file 'out' is reused for test of
'git show-ref' afterwards.
- A mixture of the output of 'git show-ref' abd 'git receive-pack'
leads to this issue.
The first intuitive reaction to resolve this issue is to remove the
file 'out' after use, so that the newly created file 'out' will have a
different file descriptor and will not be overwritten by the
'git receive-pack' process. But Johannes pointed out that removing an
open file is not possible on Windows. So we use different temporary
file names to store the output of 'git push' to solve this issue.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git tag -d' accepts one or more tag refs to delete, but each deletion
is done by calling `delete_ref` on each argv. This is very slow when
removing from packed refs. Use delete_refs instead so all the removals
can be done inside a single transaction with a single update.
Do the same for 'git branch -d'.
Since delete_refs performs all the packed-refs delete operations
inside a single transaction, if any of the deletes fail then all
them will be skipped. In practice, none of them should fail since
we verify the hash of each one before calling delete_refs, but some
network error or odd permissions problem could have different results
after this change.
Also, since the file-backed deletions are not performed in the same
transaction, those could succeed even when the packed-refs transaction
fails.
After deleting branches, remove the branch config only if the branch
ref was removed and was not subsequently added back in.
A manual test deleting 24,000 tags took about 30 minutes using
delete_ref. It takes about 5 seconds using delete_refs.
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phil Hord <phil.hord@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The peel_ref() interface is confusing and error-prone:
- it's typically used by ref iteration callbacks that have both a
refname and oid. But since they pass only the refname, we may load
the ref value from the filesystem again. This is inefficient, but
also means we are open to a race if somebody simultaneously updates
the ref. E.g., this:
int some_ref_cb(const char *refname, const struct object_id *oid, ...)
{
if (!peel_ref(refname, &peeled))
printf("%s peels to %s",
oid_to_hex(oid), oid_to_hex(&peeled);
}
could print nonsense. It is correct to say "refname peels to..."
(you may see the "before" value or the "after" value, either of
which is consistent), but mentioning both oids may be mixing
before/after values.
Worse, whether this is possible depends on whether the optimization
to read from the current iterator value kicks in. So it is actually
not possible with:
for_each_ref(some_ref_cb);
but it _is_ possible with:
head_ref(some_ref_cb);
which does not use the iterator mechanism (though in practice, HEAD
should never peel to anything, so this may not be triggerable).
- it must take a fully-qualified refname for the read_ref_full() code
path to work. Yet we routinely pass it partial refnames from
callbacks to for_each_tag_ref(), etc. This happens to work when
iterating because there we do not call read_ref_full() at all, and
only use the passed refname to check if it is the same as the
iterator. But the requirements for the function parameters are quite
unclear.
Instead of taking a refname, let's instead take an oid. That fixes both
problems. It's a little funny for a "ref" function not to involve refs
at all. The key thing is that it's optimizing under the hood based on
having access to the ref iterator. So let's change the name to make it
clear why you'd want this function versus just peel_object().
There are two other directions I considered but rejected:
- we could pass the peel information into the each_ref_fn callback.
However, we don't know if the caller actually wants it or not. For
packed-refs, providing it is essentially free. But for loose refs,
we actually have to peel the object, which would be wasteful in most
cases. We could likewise pass in a flag to the callback indicating
whether the peeled information is known, but that complicates those
callbacks, as they then have to decide whether to manually peel
themselves. Plus it requires changing the interface of every
callback, whether they care about peeling or not, and there are many
of them.
- we could make a function to return the peeled value of the current
iterated ref (computing it if necessary), and BUG() otherwise. I.e.:
int peel_current_iterated_ref(struct object_id *out);
Each of the current callers is an each_ref_fn callback, so they'd
mostly be happy. But:
- we use those callbacks with functions like head_ref(), which do
not use the iteration code. So we'd need to handle the fallback
case there, anyway.
- it's possible that a caller would want to call into generic code
that sometimes is used during iteration and sometimes not. This
encapsulates the logic to do the fast thing when possible, and
fallback when necessary.
The implementation is mostly obvious, but I want to call out a few
things in the patch:
- the test-tool coverage for peel_ref() is now meaningless, as it all
collapses to a single peel_object() call (arguably they were pretty
uninteresting before; the tricky part of that function is the
fast-path we see during iteration, but these calls didn't trigger
that). I've just dropped it entirely, though note that some other
tests relied on the tags we created; I've moved that creation to the
tests where it matters.
- we no longer need to take a ref_store parameter, since we'd never
look up a ref now. We do still rely on a global "current iterator"
variable which _could_ be kept per-ref-store. But in practice this
is only useful if there are multiple recursive iterations, at which
point the more appropriate solution is probably a stack of
iterators. No caller used the actual ref-store parameter anyway
(they all call the wrapper that passes the_repository).
- the original only kicked in the optimization when the "refname"
pointer matched (i.e., not string comparison). We do likewise with
the "oid" parameter here, but fall back to doing an actual oideq()
call. This in theory lets us kick in the optimization more often,
though in practice no current caller cares. It should never be
wrong, though (peeling is a property of an object, so two refs
pointing to the same object would peel identically).
- the original took care not to touch the peeled out-parameter unless
we found something to put in it. But no caller cares about this, and
anyway, it is enforced by peel_object() itself (and even in the
optimized iterator case, that's where we eventually end up). We can
shorten the code and avoid an extra copy by just passing the
out-parameter through the stack.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in previous commits we are removing the use of
GIT_TEST_GETTEXT_POISON=false. These tests all relied on the facility
being off, it always is off after an earlier change, but we hadn't
removed the redundant assignments to "false" in the tests.
I'm preserving the deletion of "error" lines in 38b9197a76 (t5411:
add basic test cases for proc-receive hook, 2020-08-27), it turns out
that's useful even without GIT_TEST_GETTEXT_POISON=true in
play. Update a comment added in that commit to note that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes the ability to inject "poison" gettext() messages via the
GIT_TEST_GETTEXT_POISON special test setup.
I initially added this as a compile-time option in bb946bba76 (i18n:
add GETTEXT_POISON to simulate unfriendly translator, 2011-02-22), and
most recently modified to be toggleable at runtime in
6cdccfce1e (i18n: make GETTEXT_POISON a runtime option, 2018-11-08)..
The reason for its removal is that the trade-off of maintaining it
v.s. what it's getting us has long since flipped. When gettext was
integrated in 5e9637c629 (i18n: add infrastructure for translating
Git with gettext, 2011-11-18) there was understandable concern on the
Git ML that in marking messages for translation en-masse we'd
inadvertently mark plumbing messages. The GETTEXT_POISON facility was
a way to smoke those out via our test suite.
Nowadays however we're done (or almost entirely done) with any marking
of messages for translation. New messages are usually marked by their
authors, who'll know whether it makes sense to translate them or
not. If not any errors in marking the messages are much more likely to
be spotted in review than in the the initial deluge of i18n patches in
the 2011-2012 era.
So let's just remove this. This leaves the test suite in a state where
we still have a lot of test_i18n, C_LOCALE_OUTPUT
etc. uses. Subsequent commits will remove those too.
The change to t/lib-rebase.sh is a selective revert of the relevant
part of f2d17068fd (i18n: rebase-interactive: mark comments of squash
for translation, 2016-06-17), and the comment in
t/t3406-rebase-message.sh is from c7108bf9ed (i18n: rebase: mark
messages for translation, 2012-07-25).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent commit will remove GETTEXT_POISON entirely, let's start
by removing the CI jobs that enable the option.
We cannot just remove the job because the CI is implicitly depending
on the "poison" job being a sort of "default" job in the sense that
it's the job that was otherwise run with the default compiler, no
other GIT_TEST_* options etc. So let's keep it under the name
"linux-gcc-default".
This means we can remove the initial "make test" from the "linux-gcc"
job (it does another one after setting a bunch of GIT_TEST_*
variables).
I'm not doing that because it would conflict with the in-flight
334afbc76f (tests: mark tests relying on the current default for
`init.defaultBranch`, 2020-11-18) (currently on the "seen" branch, so
the SHA-1 will almost definitely change). It's going to use that "make
test" again for different reasons, so let's preserve it for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* en/ort-directory-rename: (28 commits)
merge-ort: fix a directory rename detection bug
merge-ort: process_renames() now needs more defensiveness
merge-ort: implement apply_directory_rename_modifications()
merge-ort: add a new toplevel_dir field
merge-ort: implement handle_path_level_conflicts()
merge-ort: implement check_for_directory_rename()
merge-ort: implement apply_dir_rename() and check_dir_renamed()
merge-ort: implement compute_collisions()
merge-ort: modify collect_renames() for directory rename handling
merge-ort: implement handle_directory_level_conflicts()
merge-ort: implement compute_rename_counts()
merge-ort: copy get_renamed_dir_portion() from merge-recursive.c
merge-ort: add outline of get_provisional_directory_renames()
merge-ort: add outline for computing directory renames
merge-ort: collect which directories are removed in dirs_removed
merge-ort: initialize and free new directory rename data structures
merge-ort: add new data structures for directory rename detection
merge-ort: add implementation of type-changed rename handling
merge-ort: add implementation of normal rename handling
merge-ort: add implementation of rename collisions
...
As noted in commit 902c521a35 ("t6423: more involved directory rename
test", 2020-10-15), when we have a case where
* dir/subdir/ has several files
* almost all files in dir/subdir/ are renamed to folder/subdir/
* one of the files in dir/subdir/ is renamed to folder/subdir/newsubdir/
* the other side of history (that doesn't do the renames) adds a
new file to dir/subdir/
Then for the majority of the file renames, the directory rename of
dir/subdir/ -> folder/subdir/
is actually not represented that way but as
dir/ -> folder/
We also had one rename that was represented as
dir/subdir/ -> folder/subdir/newsubdir/
Now, since there's a new file in dir/subdir/, where does it go? Well,
there's only one rule for dir/subdir/, so the code previously noted that
this rule had the "majority" of the one "relevant" rename and thus
erroneously used it to place the file in folder/subdir/newsubdir/. We
really want the heavy weight associated with dir/ -> folder/ to also be
treated as dir/subdir/ -> folder/subdir/, so that we correctly place the
file in folder/subdir/.
Add a bunch of logic to make sure that we use all relevant renamings in
directory rename detection.
Note that testcase 12f of t6423 still fails after this, but it gets
further than merge-recursive does. There are some performance related
bits in that testcase (the region_enter messages) that do not yet
succeed, but the rest of the testcase works after this patch.
Subsequent patch series will fix up the performance side.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since directory rename detection adds new paths to opt->priv->paths and
removes old ones, process_renames() needs to now check whether
pair->one->path actually exists in opt->priv->paths instead of just
assuming it does.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function roughly follows the same outline as the function of the
same name from merge-recursive.c, but the code diverges in multiple
ways due to some special considerations:
* merge-ort's version needs to update opt->priv->paths with any new
paths (and opt->priv->paths points to struct conflict_infos which
track quite a bit of metadata for each path); merge-recursive's
version would directly update the index
* merge-ort requires that opt->priv->paths has any leading directories
of any relevant files also be included in the set of paths. And
due to pointer equality requirements on merged_info.directory_name,
we have to be careful how we compute and insert these.
* due to the above requirements on opt->priv->paths, merge-ort's
version starts with a long comment to explain all the special
considerations that need to be handled
* merge-ort can use the full data stored in opt->priv->paths to avoid
making expensive get_tree_entry() calls to regather the necessary
data.
* due to messages being deferred automatically in merge-ort, this is
the best place to handle conflict messages whereas in
merge-recursive.c they are deferred manually so that processing of
entries does all the printing
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to the string-equality-iff-pointer-equality requirements placed on
merged_info.directory_name, apply_directory_rename_modifications() will
need to have access to the exact toplevel directory name string pointer
and can't just use a new empty string. Store it in a field that we can
use.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is copied from merge-recursive.c, with minor tweaks due to:
* using strmap API
* merge-ort not using the non_unique_new_dir field, since it'll
obviate its need entirely later with performance improvements
* adding a new path_in_way() function that uses opt->priv->paths
instead of doing an expensive tree_has_path() lookup to see if
a tree has a given path.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is copied from merge-recursive.c, with minor tweaks due to using strmap
API and the fact that it can use opt->priv->paths to get all pathnames that
exist instead of taking a tree object.
This depends on a new function, handle_path_level_conflicts(), which
just has a placeholder die-not-yet-implemented implementation for now; a
subsequent patch will implement it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both of these are copied from merge-recursive.c, with just minor tweaks
due to using strmap API and not having a non_unique_new_dir field.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is nearly a wholesale copy of compute_collisions() from
merge-recursive.c, and the logic remains the same, but it has been
tweaked slightly due to:
* using strmap.h API (instead of direct hashmaps)
* allocation/freeing of data structures were done separately in
merge_start() and clear_or_reinit_internal_opts() in an earlier
patch in this series
* there is no non_unique_new_dir data field in merge-ort; that will
be handled a different way
It does depend on two new functions, apply_dir_rename() and
check_dir_renamed() which were introduced with simple
die-not-yet-implemented shells and will be implemented in subsequent
patches.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
collect_renames() is similar to merge-recursive.c's get_renames(), but
lacks the directory rename handling found in the latter. Port that code
structure over to merge-ort. This introduces three new
die-not-yet-implemented functions that will be defined in future
commits.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is modelled on the version of handle_directory_level_conflicts()
from merge-recursive.c, but is massively simplified due to the following
factors:
* strmap API provides simplifications over using direct hashmap
* we have a dirs_removed field in struct rename_info that we have an
easy way to populate from collect_merge_info(); this was already
used in compute_rename_counts() and thus we do not need to check
for condition #2.
* The removal of condition #2 by handling it earlier in the code also
obviates the need to check for condition #3 -- if both sides renamed
a directory, meaning that the directory no longer exists on either
side, then neither side could have added any new files to that
directory, and thus there are no files whose locations we need to
move due to such a directory rename.
In fact, the same logic that makes condition #3 irrelevant means
condition #1 is also irrelevant so we could drop this function.
However, it is cheap to check if both sides rename the same directory,
and doing so can save future computation. So, simply remove any
directories that both sides renamed from the list of directory renames.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is based on the first half of get_directory_renames() from
merge-recursive.c; as part of the implementation, factor out a routine,
increment_count(), to update the bookkeeping to track the number of
items renamed into new directories.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is based on merge-recursive.c's get_directory_renames(),
except that the first half has been split out into a not-yet-implemented
compute_rename_counts(). The primary difference here is our lack of the
non_unique_new_dir boolean in our strmap. The lack of that field will
at first cause us to fail testcase 2b of t6423; however, future
optimizations will obviate the need for that ugly field so we have just
left it out.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Port some directory rename handling changes from merge-recursive.c's
detect_and_process_renames() to the same-named function of merge-ort.c.
This does not yet add any use or handling of directory renames, just the
outline for where we start to compute them. Thus, a future patch will
add port additional changes to merge-ort's detect_and_process_renames().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests for the 'prefetch' task create remotes and fetch refs into
'refs/prefetch/<remote>/' and tags into 'refs/tags/'. These tests use
the remotes to create objects not intended to be seen by the "local"
repository.
In that sense, the incrmental-repack tasks did not have these objects
and refs in mind. That test replaces the object directory with a
specific pack-file layout for testing the batch-size logic. However,
this causes some operations to start showing warnings such as:
error: refs/prefetch/remote1/one does not point to a valid object!
error: refs/tags/one does not point to a valid object!
This only shows up if you run the tests verbosely and watch the output.
It caught my eye and I _thought_ that there was a bug where 'git gc' or
'git repack' wouldn't check 'refs/prefetch/' before pruning objects.
That is incorrect. Those commands do handle 'refs/prefetch/' correctly.
All that is left is to clean up the tests in t7900-maintenance.sh to
remove these tags and refs that are not being repacked for the
incremental-repack tests. Use update-ref to ensure this works with all
ref backends.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'prefetch' task fetches refs from all remotes and places them in the
refs/prefetch/<remote>/ refspace. As this task is intended to run in the
background, this allows users to keep their local data very close to the
remote servers' data while not updating the users' understanding of the
remote refs in refs/remotes/<remote>/.
However, this can clutter 'git log' decorations with copies of the refs
with the full name 'refs/prefetch/<remote>/<branch>'.
The log.excludeDecoration config option was added in a6be5e67 (log: add
log.excludeDecoration config option, 2020-05-16) for exactly this
purpose.
Ensure we set this only for users that would benefit from it by
assigning it at the beginning of the prefetch task. Other alternatives
would be during 'git maintenance register' or 'git maintenance start',
but those might assign the config even when the prefetch task is
disabled by existing config. Further, users could run 'git maintenance
run --task=prefetch' using their own scripting or scheduling. This
provides the best coverage to automatically update the config when
valuable.
It is improbable, but possible, that users might want to run the
prefetch task _and_ see these refs in their log decorations. This seems
incredibly unlikely to me, but users can always opt-in on a
command-by-command basis using --decorate-refs=refs/prefetch/.
Test that this works in a few cases. In particular, ensure that our
assignment of log.excludeDecoration=refs/prefetch/ is additive to other
existing exclusions. Further, ensure we do not add multiple copies in
multiple runs.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The file "$GIT_DIR/rebase-merge/fixup-message" is only used for fixup
commands, there's no point in writing it for squash commands as it is
immediately deleted.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we create a commit with multiple signatures, neither of these
signatures includes the other. Consequently, when we produce the
payload which has been signed so we can verify the commit, we must strip
off any other signatures, or the payload will differ from what was
signed. Do so, and in preparation for verifying with multiple
algorithms, pass the algorithm we want to verify into
parse_signed_commit.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the future, we'll want to pass some of the arguments of find_subpos
to strbuf_detach, which takes a size_t. This is fine on systems where
that's the same size as unsigned long, but that isn't the case on all
systems. Moreover, size_t makes sense since it's not possible to use a
buffer here that's larger than memory anyway.
Let's switch each use to size_t for these lengths in
grab_sub_body_contents and find_subpos.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With generation data chunk and corrected commit dates implemented, let's
update the technical documentation for commit-graph.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
091f4cf (commit: don't use generation numbers if not needed,
2018-08-30) changed paint_down_to_common() to use commit dates instead
of generation numbers v1 (topological levels) as the performance
regressed on certain topologies. With generation number v2 (corrected
commit dates) implemented, we no longer have to rely on commit dates and
can use generation numbers.
For example, the command `git merge-base v4.8 v4.9` on the Linux
repository walks 167468 commits, taking 0.135s for committer date and
167496 commits, taking 0.157s for corrected committer date respectively.
While using corrected commit dates, Git walks nearly the same number of
commits as commit date, the process is slower as for each comparision we
have to access a commit-slab (for corrected committer date) instead of
accessing struct member (for committer date).
This change incidentally broke the fragile t6404-recursive-merge test.
t6404-recursive-merge sets up a unique repository where all commits have
the same committer date without a well-defined merge-base.
While running tests with GIT_TEST_COMMIT_GRAPH unset, we use committer
date as a heuristic in paint_down_to_common(). 6404.1 'combined merge
conflicts' merges commits in the order:
- Merge C with B to form an intermediate commit.
- Merge the intermediate commit with A.
With GIT_TEST_COMMIT_GRAPH=1, we write a commit-graph and subsequently
use the corrected committer date, which changes the order in which
commits are merged:
- Merge A with B to form an intermediate commit.
- Merge the intermediate commit with C.
While resulting repositories are equivalent, 6404.4 'virtual trees were
processed' fails with GIT_TEST_COMMIT_GRAPH=1 as we are selecting
different merge-bases and thus have different object ids for the
intermediate commits.
As this has already causes problems (as noted in 859fdc0 (commit-graph:
define GIT_TEST_COMMIT_GRAPH, 2018-08-29)), we disable commit graph
within t6404-recursive-merge.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since there are released versions of Git that understand generation
numbers in the commit-graph's CDAT chunk but do not understand the GDAT
chunk, the following scenario is possible:
1. "New" Git writes a commit-graph with the GDAT chunk.
2. "Old" Git writes a split commit-graph on top without a GDAT chunk.
If each layer of split commit-graph is treated independently, as it was
the case before this commit, with Git inspecting only the current layer
for chunk_generation_data pointer, commits in the lower layer (one with
GDAT) whould have corrected commit date as their generation number,
while commits in the upper layer would have topological levels as their
generation. Corrected commit dates usually have much larger values than
topological levels. This means that if we take two commits, one from the
upper layer, and one reachable from it in the lower layer, then the
expectation that the generation of a parent is smaller than the
generation of a child would be violated.
It is difficult to expose this issue in a test. Since we _start_ with
artificially low generation numbers, any commit walk that prioritizes
generation numbers will walk all of the commits with high generation
number before walking the commits with low generation number. In all the
cases I tried, the commit-graph layers themselves "protect" any
incorrect behavior since none of the commits in the lower layer can
reach the commits in the upper layer.
This issue would manifest itself as a performance problem in this case,
especially with something like "git log --graph" since the low
generation numbers would cause the in-degree queue to walk all of the
commits in the lower layer before allowing the topo-order queue to write
anything to output (depending on the size of the upper layer).
Therefore, When writing the new layer in split commit-graph, we write a
GDAT chunk only if the topmost layer has a GDAT chunk. This guarantees
that if a layer has GDAT chunk, all lower layers must have a GDAT chunk
as well.
Rewriting layers follows similar approach: if the topmost layer below
the set of layers being rewritten (in the split commit-graph chain)
exists, and it does not contain GDAT chunk, then the result of rewrite
does not have GDAT chunks either.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As discovered by Ævar, we cannot increment graph version to
distinguish between generation numbers v1 and v2 [1]. Thus, one of
pre-requistes before implementing generation number v2 was to
distinguish between graph versions in a backwards compatible manner.
We are going to introduce a new chunk called Generation DATa chunk (or
GDAT). GDAT will store corrected committer date offsets whereas CDAT
will still store topological level.
Old Git does not understand GDAT chunk and would ignore it, reading
topological levels from CDAT. New Git can parse GDAT and take advantage
of newer generation numbers, falling back to topological levels when
GDAT chunk is missing (as it would happen with a commit-graph written
by old Git).
We introduce a test environment variable 'GIT_TEST_COMMIT_GRAPH_NO_GDAT'
which forces commit-graph file to be written without generation data
chunk to emulate a commit-graph file written by old Git.
To minimize the space required to store corrrected commit date, Git
stores corrected commit date offsets into the commit-graph file, instea
of corrected commit dates. This saves us 4 bytes per commit, decreasing
the GDAT chunk size by half, but it's possible for the offset to
overflow the 4-bytes allocated for storage. As such overflows are and
should be exceedingly rare, we use the following overflow management
scheme:
We introduce a new commit-graph chunk, Generation Data OVerflow ('GDOV')
to store corrected commit dates for commits with offsets greater than
GENERATION_NUMBER_V2_OFFSET_MAX.
If the offset is greater than GENERATION_NUMBER_V2_OFFSET_MAX, we set
the MSB of the offset and the other bits store the position of corrected
commit date in GDOV chunk, similar to how Extra Edge List is maintained.
We test the overflow-related code with the following repo history:
F - N - U
/ \
U - N - U N
\ /
N - F - N
Where the commits denoted by U have committer date of zero seconds
since Unix epoch, the commits denoted by N have committer date of
1112354055 (default committer date for the test suite) seconds since
Unix epoch and the commits denoted by F have committer date of
(2 ^ 31 - 2) seconds since Unix epoch.
The largest offset observed is 2 ^ 31, just large enough to overflow.
[1]: https://lore.kernel.org/git/87a7gdspo4.fsf@evledraar.gmail.com/
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With most of preparations done, let's implement corrected commit date.
The corrected commit date for a commit is defined as:
* A commit with no parents (a root commit) has corrected commit date
equal to its committer date.
* A commit with at least one parent has corrected commit date equal to
the maximum of its commit date and one more than the largest corrected
commit date among its parents.
As a special case, a root commit with timestamp of zero (01.01.1970
00:00:00Z) has corrected commit date of one, to be able to distinguish
from GENERATION_NUMBER_ZERO (that is, an uncomputed corrected commit
date).
To minimize the space required to store corrected commit date, Git
stores corrected commit date offsets into the commit-graph file. The
corrected commit date offset for a commit is defined as the difference
between its corrected commit date and actual commit date.
Storing corrected commit date requires sizeof(timestamp_t) bytes, which
in most cases is 64 bits (uintmax_t). However, corrected commit date
offsets can be safely stored using only 32-bits. This halves the size
of GDAT chunk, which is a reduction of around 6% in the size of
commit-graph file.
However, using offsets be problematic if a commit is malformed but valid
and has committer date of 0 Unix time, as the offset would be the same
as corrected commit date and thus require 64-bits to be stored properly.
While Git does not write out offsets at this stage, Git stores the
corrected commit dates in member generation of struct commit_graph_data.
It will begin writing commit date offsets with the introduction of
generation data chunk.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a preparatory step for introducing corrected commit dates, let's
return timestamp_t values from commit_graph_generation(), use
timestamp_t for local variables and define GENERATION_NUMBER_INFINITY
as (2 ^ 63 - 1) instead.
We rename GENERATION_NUMBER_MAX to GENERATION_NUMBER_V1_MAX to
represent the largest topological level we can store in the commit data
chunk.
With corrected commit dates implemented, we will have two such *_MAX
variables to denote the largest offset and largest topological level
that can be stored.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later commit we will introduce corrected commit date as the
generation number v2. Corrected commit dates will be stored in the new
seperate Generation Data chunk. However, to ensure backwards
compatibility with "Old" Git we need to continue to write generation
number v1 (topological levels) to the commit data chunk. Thus, we need
to compute and store both versions of generation numbers to write the
commit-graph file.
Therefore, let's introduce a commit-slab `topo_level_slab` to store
topological levels; corrected commit date will be stored in the member
`generation` of struct commit_graph_data.
The macros `GENERATION_NUMBER_INFINITY` and `GENERATION_NUMBER_ZERO`
mark commits not in the commit-graph file and commits written by a
version of Git that did not compute generation numbers respectively.
Generation numbers are computed identically for both kinds of commits.
A "slab-miss" should return `GENERATION_NUMBER_INFINITY` as the commit
is not in the commit-graph file. However, since the slab is
zero-initialized, it returns 0 (or rather `GENERATION_NUMBER_ZERO`).
Thus, we no longer need to check if the topological level of a commit is
`GENERATION_NUMBER_INFINITY`.
We will add a pointer to the slab in `struct write_commit_graph_context`
and `struct commit_graph` to populate the slab in
`fill_commit_graph_info` if the commit has a pre-computed topological
level as in case of split commit-graphs.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a preparatory step to implement generation number v2, we add tests to
ensure Git can read and parse commit-graph files without Generation Data
chunk. These files represent commit-graph files written by Old Git and
are neccesary for backward compatability.
We extend run_three_modes() and test_three_modes() to *_all_modes() with
the fourth mode being "commit-graph without generation data chunk".
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both fill_commit_graph_info() and fill_commit_in_graph() parse
information present in commit data chunk. Let's simplify the
implementation by calling fill_commit_graph_info() within
fill_commit_in_graph().
fill_commit_graph_info() used to not load committer data from commit data
chunk. However, with the upcoming switch to using corrected committer
date as generation number v2, we will have to load committer date to
compute generation number value anyway.
e51217e15 (t5000: test tar files that overflow ustar headers,
30-06-2016) introduced a test 'generate tar with future mtime' that
creates a commit with committer date of (2^36 + 1) seconds since
EPOCH. The CDAT chunk provides 34-bits for storing committer date, thus
committer time overflows into generation number (within CDAT chunk) and
has undefined behavior.
The test used to pass as fill_commit_graph_info() would not set struct
member `date` of struct commit and load committer date from the object
database, generating a tar file with the expected mtime.
However, with corrected commit date, we will load the committer date
from CDAT chunk (truncated to lower 34-bits to populate the generation
number. Thus, Git sets date and generates tar file with the truncated
mtime.
The ustar format (the header format used by most modern tar programs)
only has room for 11 (or 12, depending on some implementations) octal
digits for the size and mtime of each file.
As the CDAT chunk is overflow by 12-octal digits but not 11-octal
digits, we split the existing tests to test both implementations
separately and add a new explicit test for 11-digit implementation.
To test the 11-octal digit implementation, we create a future commit
with committer date of 2^34 - 1, which overflows 11-octal digits without
overflowing 34-bits of the Commit Date chunks.
To test the 12-octal digit implementation, the smallest committer date
possible is 2^36 + 1, which overflows the CDAT chunk and thus
commit-graph must be disabled for the test.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In indegree_walk_step(), we add unvisited parents to the indegree queue.
However, parents are not guaranteed to be parsed. As the indegree queue
sorts by generation number, let's parse parents before inserting them to
ensure the correct priority order.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before computing Bloom filters, the commit-graph machinery uses
commit_gen_cmp to sort commits by generation order for improved diff
performance. 3d11275505 (commit-graph: examine commits by generation
number, 2020-03-30) claims that this sort can reduce the time spent to
compute Bloom filters by nearly half.
But since c49c82aa4c (commit: move members graph_pos, generation to a
slab, 2020-06-17), this optimization is broken, since asking for a
'commit_graph_generation()' directly returns GENERATION_NUMBER_INFINITY
while writing.
Not all hope is lost, though: 'commit_gen_cmp()' falls back to
comparing commits by their date when they have equal generation number,
and so since c49c82aa4c is purely a date comparison function. This
heuristic is good enough that we don't seem to loose appreciable
performance while computing Bloom filters.
Applying this patch (compared with v2.30.0) speeds up computing Bloom
filters by factors ranging from 0.40% to 5.19% on various repositories [1].
So, avoid the useless 'commit_graph_generation()' while writing by
instead accessing the slab directly. This returns the newly-computed
generation numbers, and allows us to avoid the heuristic by directly
comparing generation numbers.
[1]: https://lore.kernel.org/git/20210105094535.GN8396@szeder.dev/
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change reduced time spent in strlen() while comparing
consecutive paths in verify_cache(), but we can do better. The
conditional checks the existence of a directory separator at the correct
location, but only after doing a string comparison. Swap the order to be
logically equivalent but perform fewer string comparisons.
To test the effect on performance, I used a repository with over three
million paths in the index. I then ran the following command on repeat:
git -c index.threads=1 commit --amend --allow-empty --no-edit
Here are the measurements over 10 runs after a 5-run warmup:
Benchmark #1: v2.30.0
Time (mean ± σ): 854.5 ms ± 18.2 ms
Range (min … max): 825.0 ms … 892.8 ms
Benchmark #2: Previous change
Time (mean ± σ): 833.2 ms ± 10.3 ms
Range (min … max): 815.8 ms … 849.7 ms
Benchmark #3: This change
Time (mean ± σ): 815.5 ms ± 18.1 ms
Range (min … max): 795.4 ms … 849.5 ms
This change is 2% faster than the previous change and 5% faster than
v2.30.0.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the name length field of cache entries instead of calculating its
value anew.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The end of the cache tree index extension format trails off with
ellipses ever since 23fcc98 (doc: technical details about the index
file format, 2011-03-01). While an intuitive reader could gather what
this means, it could be better to use "and so on" instead.
Really, this is only justified because I also wanted to point out that
the number of subtrees in the index format is used to determine when the
recursive depth-first-search stack should be "popped." This should help
to add clarity to the format.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I had difficulty in my efforts to learn about the cache tree extension
based on the documentation and code because I had an incorrect
assumption about how it behaved. This might be due to some ambiguity in
the documentation, so this change modifies the beginning of the cache
tree format by expanding the description of the feature.
My hope is that this documentation clarifies a few things:
1. There is an in-memory recursive tree structure that is constructed
from the extension data. This structure has a few differences, such
as where the name is stored.
2. What does it mean for an entry to be invalid?
3. When exactly are "new" trees created?
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The index has a "cache tree" extension. This corresponds to a
significant API implemented in cache-tree.[ch]. However, there are a few
places that refer to this erroneously as "cached tree". These are rare,
but notably the index-format.txt file itself makes this error.
The only other reference is in t7104-reset-hard.sh.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commands such as "git reset --hard" rebuild the in-memory representation
of the cache tree index extension by parsing tree objects starting at a
known root tree. The performance of this operation can vary widely
depending on the width and depth of the repository's working directory
structure. Measure the time in this operation using trace2 regions in
prime_cache_tree().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we write or read the cache tree index extension, it can be good to
isolate how much of the file I/O time is spent constructing this
in-memory tree from the existing index or writing it out again to the
new index file. Use trace2 regions to indicate that we are spending time
on this operation.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Comments update.
* ab/gettext-charset-comment-fix:
gettext.c: remove/reword a mostly-useless comment
Makefile: remove a warning about old GETTEXT_POISON flag
Fix 2.29 regression where "git mergetool --tool-help" fails to list
all the available tools.
* pb/mergetool-tool-help-fix:
mergetool--lib: fix '--tool-help' to correctly show available tools
"git for-each-repo --config=<var> <cmd>" should not run <cmd> for
any repository when the configuration variable <var> is not defined
even once.
* ds/for-each-repo-noopfix:
for-each-repo: do nothing on empty config
Some tests expect that "ls -l" output has either '-' or 'x' for
group executable bit, but setgid bit can be inherited from parent
directory and make these fields 'S' or 's' instead, causing test
failures.
* mt/t4129-with-setgid-dir:
t4129: don't fail if setgid is set in the test directory
Follow-up on the "maintenance part-3" which introduced scheduled
maintenance tasks to support platforms whose native scheduling
methods are not 'cron'.
* ds/maintenance-part-4:
maintenance: use Windows scheduled tasks
maintenance: use launchctl on macOS
maintenance: include 'cron' details in docs
maintenance: extract platform-specific scheduling
Bash completion (in contrib/) update to make it easier for
end-users to add completion for their custom "git" subcommands.
* fc/completion-aliases-support:
completion: add proper public __git_complete
test: completion: add tests for __git_complete
completion: bash: improve function detection
completion: bash: add __git_have_func helper
"git stash" did not work well in a sparsely checked out working
tree.
* en/stash-apply-sparse-checkout:
stash: fix stash application in sparse-checkouts
stash: remove unnecessary process forking
t7012: add a testcase demonstrating stash apply bugs in sparse checkouts
Retire more names with "sha1" in it.
* ma/sha1-is-a-hash:
hash-lookup: rename from sha1-lookup
sha1-lookup: rename `sha1_pos()` as `hash_pos()`
object-file.c: rename from sha1-file.c
object-name.c: rename from sha1-name.c
Code clean-up.
* ma/t1300-cleanup:
t1300: don't needlessly work with `core.foo` configs
t1300: remove duplicate test for `--file no-such-file`
t1300: remove duplicate test for `--file ../foo`
"git rev-parse" can be explicitly told to give output as absolute
or relative path with the `--path-format=(absolute|relative)` option.
* bc/rev-parse-path-format:
rev-parse: add option for absolute or relative path formatting
abspath: add a function to resolve paths with missing components
The configuration variable 'core.abbrev' can be set to 'no' to
force no abbreviation regardless of the hash algorithm.
* ew/decline-core-abbrev:
core.abbrev=no disables abbreviations
While we currently have the `GIT_CONFIG_PARAMETERS` environment variable
which can be used to pass runtime configuration data to git processes,
it's an internal implementation detail and not supposed to be used by
end users.
Next to being for internal use only, this way of passing config entries
has a major downside: the config keys need to be parsed as they contain
both key and value in a single variable. As such, it is left to the user
to escape any potentially harmful characters in the value, which is
quite hard to do if values are controlled by a third party.
This commit thus adds a new way of adding config entries via the
environment which gets rid of this shortcoming. If the user passes the
`GIT_CONFIG_COUNT=$n` environment variable, Git will parse environment
variable pairs `GIT_CONFIG_KEY_$i` and `GIT_CONFIG_VALUE_$i` for each
`i` in `[0,n)`.
While the same can be achieved with `git -c <name>=<value>`, one may
wish to not do so for potentially sensitive information. E.g. if one
wants to set `http.extraHeader` to contain an authentication token,
doing so via `-c` would trivially leak those credentials via e.g. ps(1),
which typically also shows command arguments.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `getenv_safe()` helper function helps to safely retrieve multiple
environment values without the need to depend on platform-specific
behaviour for the return value's lifetime. We'll make use of this
function in a following patch, so let's make it available by making it
non-static and adding a declaration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit added a new format for $GIT_CONFIG_PARAMETERS which
is able to robustly handle subsections with "=" in them. Let's start
writing the new format. Unfortunately, this does much less than you'd
hope, because "git -c" itself has the same ambiguity problem! But it's
still worth doing:
- we've now pushed the problem from the inter-process communication
into the "-c" command-line parser. This would free us up to later
add an unambiguous format there (e.g., separate arguments like "git
--config key value", etc).
- for --config-env, the parser already disallows "=" in the
environment variable name. So:
git --config-env section.with=equals.key=ENVVAR
will robustly set section.with=equals.key to the contents of
$ENVVAR.
The new test shows the improvement for --config-env.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we stuff config options into GIT_CONFIG_PARAMETERS, we shell-quote
each one as a single unit, like:
'section.one=value1' 'section.two=value2'
On the reading side, we de-quote to get the individual strings, and then
parse them by splitting on the first "=" we find. This format is
ambiguous, because an "=" may appear in a subsection. So the config
represented in a file by both:
[section "subsection=with=equals"]
key = value
and:
[section]
subsection = with=equals.key=value
ends up in this flattened format like:
'section.subsection=with=equals.key=value'
and we can't tell which was desired. We have traditionally resolved this
by taking the first "=" we see starting from the left, meaning that we
allowed arbitrary content in the value, but not in the subsection.
Let's make our environment format a bit more robust by separately
quoting the key and value. That turns those examples into:
'section.subsection=with=equals.key'='value'
and:
'section.subsection'='with=equals.key=value'
respectively, and we can tell the difference between them. We can detect
which format is in use for any given element of the list based on the
presence of the unquoted "=". That means we can continue to allow the
old format to work to support any callers which manually used the old
format, and we can even intermingle the two formats. The old format
wasn't documented, and nobody was supposed to be using it. But it's
likely that such callers exist in the wild, so it's nice if we can avoid
breaking them. Likewise, it may be possible to trigger an older version
of "git -c" that runs a script that calls into a newer version of "git
-c"; that new version would see the intermingled format.
This does create one complication, which is that the obvious format in
the new scheme for
[section]
some-bool
is:
'section.some-bool'
with no equals. We'd mistake that for an old-style variable. And it even
has the same meaning in the old style, but:
[section "with=equals"]
some-bool
does not. It would be:
'section.with=equals=some-bool'
which we'd take to mean:
[section]
with = equals=some-bool
in the old, ambiguous style. Likewise, we can't use:
'section.some-bool'=''
because that's ambiguous with an actual empty string. Instead, we'll
again use the shell-quoting to give us a hint, and use:
'section.some-bool'=
to show that we have no value.
Note that this commit just expands the reading side. We'll start writing
the new format via "git -c" in a future patch. In the meantime, the
existing "git -c" tests will make sure we didn't break reading the old
format. But we'll also add some explicit coverage of the two formats to
make sure we continue to handle the old one after we move the writing
side over.
And one final note: since we're now using the shell-quoting as a
semantically meaningful hint, this closes the door to us ever allowing
arbitrary shell quoting, like:
'a'shell'would'be'ok'with'this'.key=value
But we have never supported that (only what sq_quote() would produce),
and we are probably better off keeping things simple, robust, and
backwards-compatible, than trying to make it easier for humans. We'll
continue not to advertise the format of the variable to users, and
instead keep "git -c" as the recommended mechanism for setting config
(even if we are trying to be kind not to break users who may be relying
on the current undocumented format).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the "git blame --porcelain" output, lines that ends with three
integers may not be the line that shows a commit object with line
numbers and block length (the contents from the blamed file or the
summary field can have a line that happens to match). Also, the
names of the author may have more than three SP separated tokens
("git blame -L242,+1 cf6de18aab Documentation/SubmittingPatches"
gives an example). The existing "grep -E | cut" pipeline is a bit
too loose on these two points.
While they can be assumed on the test data, it is not so hard to
use the right pattern from the documented format, so let's do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitmailmap(5) uses 'GIT_WORK_DIR' to refer to the root of the
repository, but this environment variable does not exist.
Use the correct spelling for that variable, 'GIT_WORK_TREE'.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We may return objects in one of two orders: how they appear in the .idx
(sorted by object id) or how they appear in the packfile itself. To
further complicate matters, we have two ordering variables, "i" and
"pos", and it is not clear to which order they apply.
Let's clarify this by using an unambiguous name where possible, and
leaving a comment for the variable that does double-duty.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a pipe, only the return code of the last command is used. Thus, all
other commands will have their return codes masked. Rewrite pipes so
that there are no git commands upstream so that their failure is
reported.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage comment for test_commit() shows that the --author option
should be given as `--author=<author>`. However, this is incorrect as it
only works when given as `--author <author>`. Correct this erroneous
text.
Also, for the sake of correctness, fix the description as well since we
invoke `git commit` with `--author <author>`, not `--author=<author>`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_promisor_file() already uses xfopen(), so it would die
if the file cannot be opened for writing. To be consistent
with this behavior and not overlook issues, let's also die if
there are errors when we are actually writing to the file.
Suggested-by: Jeff King <peff@peff.net>
Suggested-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* en/ort-conflict-handling:
merge-ort: add handling for different types of files at same path
merge-ort: copy find_first_merges() implementation from merge-recursive.c
merge-ort: implement format_commit()
merge-ort: copy and adapt merge_submodule() from merge-recursive.c
merge-ort: copy and adapt merge_3way() from merge-recursive.c
merge-ort: flesh out implementation of handle_content_merge()
merge-ort: handle book-keeping around two- and three-way content merge
merge-ort: implement unique_path() helper
merge-ort: handle directory/file conflicts that remain
merge-ort: handle D/F conflict where directory disappears due to merge
* en/diffcore-rename:
diffcore-rename: remove unnecessary duplicate entry checks
diffcore-rename: accelerate rename_dst setup
diffcore-rename: simplify and accelerate register_rename_src()
t4058: explore duplicate tree entry handling in a bit more detail
t4058: add more tests and documentation for duplicate tree entry handling
diffcore-rename: reduce jumpiness in progress counters
diffcore-rename: simplify limit check
diffcore-rename: avoid usage of global in too_many_rename_candidates()
diffcore-rename: rename num_create to num_destinations
To prepare for on-disk reverse indexes, remove a spot in
'offset_to_pack_pos()' that looks at the 'revindex' array in 'struct
packed_git'.
Even though this use of the revindex pointer is within pack-revindex.c,
this clean up is still worth doing. Since the 'revindex' pointer will be
NULL when reading from an on-disk reverse index (instead the
'revindex_data' pointer will be mmaped to the 'pack-*.rev' file), this
call-site would have to include a conditional to lookup the offset for
position 'mi' each iteration through the search.
So instead of open-coding 'pack_pos_to_offset()', call it directly from
within 'offset_to_pack_pos()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that all spots outside of pack-revindex.c that reference 'struct
revindex_entry' directly have been removed, it is safe to hide the
implementation by moving it from pack-revindex.h to pack-revindex.c.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that all 'find_revindex_position()' callers have been removed (and
converted to the more descriptive 'offset_to_pack_pos()'), it is almost
safe to get rid of 'find_revindex_position()' entirely. Almost, except
for the fact that 'offset_to_pack_pos()' calls
'find_revindex_position()'.
Inline 'find_revindex_position()' into 'offset_to_pack_pos()', and
then remove 'find_revindex_position()' entirely.
This is a straightforward refactoring with one minor snag.
'offset_to_pack_pos()' used to load the index before calling
'find_revindex_position()'. That means that by the time
'find_revindex_position()' starts executing, 'p->num_objects' can be
safely read. After inlining, be careful to not read 'p->num_objects'
until _after_ 'load_pack_revindex()' (which loads the index as a
side-effect) has been called.
Another small fix that is included is converting the upper- and
lower-bounds to be unsigned's instead of ints. This dates back to
92e5c77c37 (revindex: export new APIs, 2013-10-24)--ironically, the last
time we introduced new APIs here--but this unifies the types.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that no callers of 'find_pack_revindex()' remain, remove the
function's declaration and implementation entirely.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'estimate_repack_memory()' takes into account the amount of memory
required to load the reverse index in memory by multiplying the assumed
number of objects by the size of the 'revindex_entry' struct.
Prepare for hiding the definition of 'struct revindex_entry' by removing
a 'sizeof()' of that type from outside of pack-revindex.c. Instead,
guess that one off_t and one uint32_t are required per object. Strictly
speaking, this is a worse guess than asking for 'sizeof(struct
revindex_entry)' directly, since the true size of this struct is 16
bytes with padding on the end of the struct in order to align the offset
field.
But, this is an approximation anyway, and it does remove a use of the
'struct revindex_entry' from outside of pack-revindex internals.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid looking at the 'revindex' pointer directly and instead call
'pack_pos_to_index()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove direct manipulation of the 'struct revindex_entry' type as well
as calls to the deprecated API in 'packfile.c:unpack_entry()'. Usual
clean-up is performed (replacing '->nr' with calls to
'pack_pos_to_index()' and so on).
Add an additional check to make sure that 'obj_offset()' points at a
valid object. In the case this check is violated, we cannot call
'mark_bad_packed_object()' because we don't know the OID. At the top of
the call stack is do_oid_object_info_extended() (via
packed_object_info()), which does mark the object.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert another call of 'find_pack_revindex()' to its replacement
'pack_pos_to_offset()'. Likewise:
- Avoid manipulating `struct packed_git`'s `revindex` pointer directly
by removing the pointer-as-array indexing.
- Add an additional guard to check that the offset 'obj_offset()'
points to a real object. This should be the case with well-behaved
callers to 'packed_object_info()', but isn't guarenteed.
Other blocks that fill in various other values from the 'struct
object_info' request handle bad inputs by setting the type to
'OBJ_BAD' and jumping to 'out'. Do the same when given a bad offset
here.
The previous code would have segfaulted when given a bad
'obj_offset' value, since 'find_pack_revindex()' would return
'NULL', and then the line that fills 'oi->disk_sizep' would try to
access 'NULL[1]' with a stride of 16 bytes (the width of 'struct
revindex_entry)'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perform exactly the same conversion as in the previous commit to another
caller within 'packfile.c'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace direct accesses to the 'struct revindex' type with a call to
'pack_pos_to_index()'.
Likewise drop the old-style 'find_pack_revindex()' with its replacement
'offset_to_pack_pos()' (while continuing to perform the same error
checking).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove another instance of looking at the revindex directly by instead
calling 'pack_pos_to_index()'. Unlike other patches, this caller only
cares about the index position of each object in the loop.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove another instance of direct revindex manipulation by calling
'pack_pos_to_offset()' instead (the caller here does not care about the
index position of the object at position 'pos').
Note that we cannot just use the existing "offset" variable to store the
value we get from pack_pos_to_offset(). It is incremented by
unpack_object_header(), but we later need the original value. Since
we'll no longer have revindex->offset to read it from, we'll store that
in a separate variable ("header" since it points to the entry's header
bytes).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove another caller that holds onto a 'struct revindex_entry' by
replacing the direct indexing with calls to 'pack_pos_to_offset()' and
'pack_pos_to_index()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid storing the revindex entry directly, since this structure will
soon be removed from the public interface. Instead, store the offset and
index position by calling 'pack_pos_to_offset()' and
'pack_pos_to_index()', respectively.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace find_revindex_position() with its counterpart in the new API,
offset_to_pack_pos().
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace direct accesses to the revindex with calls to
'offset_to_pack_pos()' and 'pack_pos_to_index()'.
Since this caller already had some error checking (it can jump to the
'give_up' label if it encounters an error), we can easily check whether
or not the provided offset points to an object in the given pack. This
error checking existed prior to this patch, too, since the caller checks
whether the return value from 'find_pack_revindex()' was NULL or not.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace a direct access to the revindex array with
'pack_pos_to_offset()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace direct revindex accesses with calls to 'pack_pos_to_offset()'
and 'pack_pos_to_index()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
First replace 'find_pack_revindex()' with its replacement
'offset_to_pack_pos()'. This prevents any bogus OFS_DELTA that may make
its way through until 'write_reuse_object()' from causing a bad memory
read (if 'revidx' is 'NULL')
Next, replace a direct access of '->nr' with the wrapper function
'pack_pos_to_index()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next several patches, we will prepare for loading a reverse index
either in memory (mapping the inverse of the .idx's contents in-core),
or directly from a yet-to-be-introduced on-disk format. To prepare for
that, we'll introduce an API that avoids the caller explicitly indexing
the revindex pointer in the packed_git structure.
There are four ways to interact with the reverse index. Accordingly,
four functions will be exported from 'pack-revindex.h' by the time that
the existing API is removed. A caller may:
1. Load the pack's reverse index. This involves opening up the index,
generating an array, and then sorting it. Since opening the index
can fail, this function ('load_pack_revindex()') returns an int.
Accordingly, it takes only a single argument: the 'struct
packed_git' the caller wants to build a reverse index for.
This function is well-suited for both the current and new API.
Callers will have to continue to open the reverse index explicitly,
but this function will eventually learn how to detect and load a
reverse index from the on-disk format, if one exists. Otherwise, it
will fallback to generating one in memory from scratch.
2. Convert a pack position into an offset. This operation is now
called `pack_pos_to_offset()`. It takes a pack and a position, and
returns the corresponding off_t.
Any error simply calls BUG(), since the callers are not well-suited
to handle a failure and keep going.
3. Convert a pack position into an index position. Same as above; this
takes a pack and a position, and returns a uint32_t. This operation
is known as `pack_pos_to_index()`. The same thinking about error
conditions applies here as well.
4. Find the pack position for a given offset. This operation is now
known as `offset_to_pack_pos()`. It takes a pack, an offset, and a
pointer to a uint32_t where the position is written, if an object
exists at that offset. Otherwise, -1 is returned to indicate
failure.
Unlike some of the callers that used to access '->offset' and '->nr'
directly, the error checking around this call is somewhat more
robust. This is important since callers should always pass an offset
which points at the boundary of two objects. The API, unlike direct
access, enforces that that is the case.
This will become important in a subsequent patch where a caller
which does not but could check the return value treats the signed
`-1` from `find_revindex_position()` as an index into the 'revindex'
array.
Two design warts are carried over into the new API:
- Asking for the index position of an out-of-bounds object will result
in a BUG() (since no such object exists), but asking for the offset
of the non-existent object at the end of the pack returns the total
size of the pack.
This makes it convenient for callers who always want to take the
difference of two adjacent object's offsets (to compute the on-disk
size) but don't want to worry about boundaries at the end of the
pack.
- offset_to_pack_pos() lazily loads the reverse index, but
pack_pos_to_index() doesn't (callers of the former are well-suited
to handle errors, but callers of the latter are not).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's replace the 2 different pieces of code that write a
promisor file in 'builtin/repack.c' and 'fetch-pack.c'
with a new function called 'write_promisor_file()' in
'pack-write.c' and 'pack.h'.
This might also help us in the future, if we want to put
back the ref names and associated hashes that were in
the promisor files we are repacking in 'builtin/repack.c'
as suggested by a NEEDSWORK comment just above the code
we are refactoring.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we are going to refactor the code that actually writes
the promisor file into a separate function in a following
commit, let's rename the current write_promisor_file()
function to create_promisor_file().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove support for the magical "repo-abbrev" comment in .mailmap
files. This was added to .mailmap parsing in [1], as a generalized
feature of the git-shortlog Perl script added earlier in [2].
There was no documentation or tests for this feature, and I don't
think it's used in practice anymore.
What it did was to allow you to specify a single string to be
search-replaced with "/.../" in the .mailmap file. E.g. for
linux.git's current .mailmap:
git archive --remote=git@gitlab.com:linux-kernel/linux.git \
HEAD -- .mailmap | grep -a repo-abbrev
# repo-abbrev: /pub/scm/linux/kernel/git/
Then when running e.g.:
git shortlog --merges --author=Linus -1 v5.10-rc7..v5.10 | grep Merge
We'd emit (the [...] is mine):
Merge tag [...]git://git.kernel.org/.../tip/tip
But will now emit:
Merge tag [...]git.kernel.org/pub/scm/linux/kernel/git/tip/tip
I think at this point this is just a historical artifact we can get
rid of. It was initially meant for Linus's own use when we integrated
the Perl script[2], but since then it seems he's stopped using it.
Digging through Linus's release announcements on the LKML[3] the last
release I can find that made use of this output is Linux 2.6.25-rc6
back in March 2008[4]. Later on Linus started using --no-merges[5],
and nowadays seems to prefer some custom not-quite-shortlog format of
merges from lieutenants[6].
You will still see it on linux.git if you run "git shortlog" manually
yourself with --merges, with this removed you can still get the same
output with:
git log --pretty=fuller v5.10-rc7..v5.10 |
sed 's!/pub/scm/linux/kernel/git/!/.../!g' |
git shortlog
Arguably we should do the same for the search-replacing of "[PATCH]"
at the beginning with "". That seems to be another relic of a bygone
era when linux.git patches would have their E-Mail subject lines
applied as-is by "git am" or whatever. But we documented that feature
in "git-shortlog(1)", and it seems more widely applicable than
something purely kernel-specific.
1. 7595e2ee6e (git-shortlog: make common repository prefix
configurable with .mailmap, 2006-11-25)
2. fa375c7f1b (Add git-shortlog perl script, 2005-06-04)
3. https://lore.kernel.org/lkml/
4. https://lore.kernel.org/lkml/alpine.LFD.1.00.0803161651350.3020@woody.linux-foundation.org/
5. https://lore.kernel.org/lkml/BANLkTinrbh7Xi27an3uY7pDWrNKhJRYmEA@mail.gmail.com/
6. https://lore.kernel.org/lkml/CAHk-=wg1+kf1AVzXA-RQX0zjM6t9J2Kay9xyuNqcFHWV-y5ZYw@mail.gmail.com/
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add documentation and more tests for case-insensitivity. The existing
test only matched on the E-Mail part, but as shown here we also match
the name with strcasecmp().
This behavior was last discussed on the mailing list in the thread
starting at [1]. It seems we're keeping it like this, so let's
document it.
1. https://lore.kernel.org/git/87czykvg19.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for mailmap's handling of "<>", which is allowed on the RHS,
but not the LHS of a "<LHS> <RHS>" pair.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for mailmap's handling of whitespace, i.e. how it trims
space within "<>" and around author names.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the mailmap documentation added in 0925ce4d49 (Add map_user()
and clear_mailmap() to mailmap, 2009-02-08) to continue discussing the
Jane/Joe example. I think this makes things a lot less confusing as
we're building up more complex examples using one set of data which
covers all the things we'd like to discuss.
Also add tests to assert that what our documentation says is what's
actually happening. This is mostly (or entirely) covered by existing
tests which I'm not deleting, but having these tests for the synopsis
makes it easier to follow-along while reading the tests & docs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor a few more tests to use the new "--append" option to
"test_commit". I added it for use in the mailmap tests, but this
demonstrates how useful it is in general.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an --append option to test_commit to append <contents> to the
<file> we're writing to. This simplifies a lot of test setup, as shown
in some of the tests being changed here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for --author to "test_commit". This will simplify some
current and future tests, one of those is being changed here.
Let's also line-wrap the "git commit" command invocation to make diffs
that add subsequent options easier to add, as they'll only need to add
a new option line.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --notick argument was added in [1] and was followed by --signoff
in [2], but neither of these commits added any documentation for these
options. When -C was added in [3] a comment was added to document it,
but not the other options. Let's document all of these options.
1. 44b85e89d7 (t7003: add test to filter a branch with a commit at
epoch, 2012-07-12),
2. 5ed75e2a3f (cherry-pick: don't forget -s on failure, 2012-09-14).
3. 6f94351b0a (test-lib-functions.sh: teach test_commit -C <dir>,
2016-12-08)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expand the comment template for "test_commit" to match that of
"test_commit_bulk" added in b1c36cb849 (test-lib: introduce
test_commit_bulk, 2019-07-02). It has several undocumented options,
which won't all fit on one line. Follow-up commit(s) will document
them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
That we silently ignore missing mailmap.file or mailmap.blob values is
intentional. See 938a60d64f (mailmap: clean up read_mailmap error
handling, 2012-12-12). However, nothing tested for this. Let's do that
by checking that stderr is empty in those cases.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a test that used a custom fuzzing function since
bfdfa3d414 (t4203 (mailmap): stop hardcoding commit ids and dates,
2010-10-15) to just use the "blame --porcelain" output instead.
We could use the same pattern as 0ba9c9a0fb (t8008: rely on
rev-parse'd HEAD instead of sha1 value, 2017-07-26) does to do this,
but there wouldn't be any point. We're not trying to test "blame"
output here in general, just that "blame" pays attention to the
mailmap.
So it's sufficient to get the blamed line(s) and authors from the
output, which is much easier with the "--porcelain" option.
It would still be possible for there to be a bug in "blame" such that
it uses the mailmap for its "--porcelain" output, but not the regular
output. Let's test for that simply by checking if specifying the
mailmap changes the output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test for one of the error conditions added in
938a60d64f (mailmap: clean up read_mailmap error handling,
2012-12-12).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a redundant line in a test added in d20d654fe8 (Change current
mailmap usage to do matching on both name and email of
author/committer., 2009-02-08).
This didn't conceivably test anything useful and is most likely a
copy/paste error.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --stdin tests setup the "contact" file in the main setup, let's
instead set it up in the test that uses it.
Also refactor the first test so it's obvious that the point of it is
that "check-mailmap" will spew its input as-is when given no
argument. For that one we can just use the "expect" file as-is.
Also add tests for how other "--stdin" cases are handled, e.g. one
where we actually do a mapping.
For the rest of --stdin testing we just assume we're going to get the
same output. We could follow-up and make sure everything's
round-tripped through both --stdin and the file/blob backends, but I
don't think there's much point in that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the mailmap tests to:
* Setup "actual" test files in the body of "test_expect_success"
* Don't have X of "test_expect_success X Y" be an unquoted string.
* Not to carry over test config between tests, and instead use
"test_config".
* Replace various "echo" a line-at-a-time patterns with here-docs.
* Change a case of "log.mailmap=False" to use the lower-case
"false". Both work, but this ends up in git-config's boolean
parsing and these atypical values are tested for elsewhere. Let's
use the lower-case to not draw the reader's attention to this
abnormality.
* Remove commentary asserting that things work a given way in favor
of simply testing for it, i.e. in the case of a .mailmap file
outside of the repository.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change these tests to use the preferred whitespace around ">",
"<<-EOF" etc. This is an initial step in larger and more meaningful
refactoring of the file, which makes a subsequent commit easier to
read.
I'm not changing the whitespace of "echo <str> > file" patterns to
"echo <str> >file" because all of those will be changed to here-docs
in a subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mentioning the comment syntax and blank line support first is in line
with how "git help config" describes its format. See
b8936cf060 (config.txt grammar, typo, and asciidoc fixes, 2006-06-08)
for the paragraph I'm copying & amending from its documentation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a passing mention of the mailmap.file and mailmap.blob
configuration options. Before this addition a reader of the
"check-mailmap" manpage would have no idea that a custom map could be
specified, unless they'd happen to e.g. come across it in the "config"
manpage first.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Quote the mailmap.file and mailmap.blob configuration variables as
`mailmap.file` and `mailmap.blob`, and link to git-config(1). This is
in line with the preferred way of doing this in the rest of our
documentation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a gitmailmap(5) page similar to how .gitmodules and .gitignore
have their own pages at gitmodules(5) and gitignore(5). Now instead of
"check-mailmap", "blame" and "shortlog" documentation including the
description of the format we link to one canonical place.
This makes things easier for readers, since in our manpage or
web-based[1] output it's not clear that the "MAPPING AUTHORS" sections
aren't subtly different, as opposed to just included.
1. https://git-scm.com/docs/git-check-mailmap
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When executing a fetch, then git will currently allocate one reference
transaction per reference update and directly commit it. This means that
fetches are non-atomic: even if some of the reference updates fail,
others may still succeed and modify local references.
This is fine in many scenarios, but this strategy has its downsides.
- The view of remote references may be inconsistent and may show a
bastardized state of the remote repository.
- Batching together updates may improve performance in certain
scenarios. While the impact probably isn't as pronounced with loose
references, the upcoming reftable backend may benefit as it needs to
write less files in case the update is batched.
- The reference-update hook is currently being executed twice per
updated reference. While this doesn't matter when there is no such
hook, we have seen severe performance regressions when doing a
git-fetch(1) with reference-transaction hook when the remote
repository has hundreds of thousands of references.
Similar to `git push --atomic`, this commit thus introduces atomic
fetches. Instead of allocating one reference transaction per updated
reference, it causes us to only allocate a single transaction and commit
it as soon as all updates were received. If locking of any reference
fails, then we abort the complete transaction and don't update any
reference, which gives us an all-or-nothing fetch.
Note that this may not completely fix the first of above downsides, as
the consistent view also depends on the server-side. If the server
doesn't have a consistent view of its own references during the
reference negotiation phase, then the client would get the same
inconsistent view the server has. This is a separate problem though and,
if it actually exists, can be fixed at a later point.
This commit also changes the way we write FETCH_HEAD in case `--atomic`
is passed. Instead of writing changes as we go, we need to accumulate
all changes first and only commit them at the end when we know that all
reference updates succeeded. Ideally, we'd just do so via a temporary
file so that we don't need to carry all updates in-memory. This isn't
trivially doable though considering the `--append` mode, where we do not
truncate the file but simply append to it. And given that we support
concurrent processes appending to FETCH_HEAD at the same time without
any loss of data, seeding the temporary file with current contents of
FETCH_HEAD initially and then doing a rename wouldn't work either. So
this commit implements the simple strategy of buffering all changes and
appending them to the file on commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The handling of ref updates is completely handled by `s_update_ref()`,
which will manage the complete lifecycle of the reference transaction.
This is fine right now given that git-fetch(1) does not support atomic
fetches, so each reference gets its own transaction. It is quite
inflexible though, as `s_update_ref()` only knows about a single
reference update at a time, so it doesn't allow us to alter the
strategy.
This commit prepares `s_update_ref()` and its only caller
`update_local_ref()` to allow passing an external transaction. If none
is given, then the existing behaviour is triggered which creates a new
transaction and directly commits it. Otherwise, if the caller provides a
transaction, then we only queue the update but don't commit it. This
optionally allows the caller to manage when a transaction will be
committed.
Given that `update_local_ref()` is always called with a `NULL`
transaction for now, no change in behaviour is expected from this
change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The cleanup code in `s_update_ref()` is currently duplicated for both
succesful and erroneous exit paths. This commit refactors the function
to have a shared exit path for both cases to remove the duplication.
Suggested-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit refactors `append_fetch_head()` to use a `struct strbuf` for
formatting the update which we're about to append to the FETCH_HEAD
file. While the refactoring doesn't have much of a benefit right now, it
serves as a preparatory step to implement atomic fetches where we need
to buffer all updates to FETCH_HEAD and only flush them out if all
reference updates succeeded.
No change in behaviour is expected from this commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing a fetch with the default `--write-fetch-head` option, we
write all updated references to FETCH_HEAD while the updates are
performed. Given that updates are not performed atomically, it means
that we we write to FETCH_HEAD even if some or all of the reference
updates fail.
Given that we simply update FETCH_HEAD ad-hoc with each reference, the
logic is completely contained in `store_update_refs` and thus quite hard
to extend. This can already be seen by the way we skip writing to the
FETCH_HEAD: instead of having a conditional which simply skips writing,
we instead open "/dev/null" and needlessly write all updates there.
We are about to extend git-fetch(1) to accept an `--atomic` flag which
will make the fetch an all-or-nothing operation with regards to the
reference updates. This will also require us to make the updates to
FETCH_HEAD an all-or-nothing operation, but as explained doing so is not
easy with the current layout. This commit thus refactors the wa we write
to FETCH_HEAD and pulls out the logic to open, append to, commit and
close the file. While this may seem rather over-the top at first,
pulling out this logic will make it a lot easier to update the code in a
subsequent commit. It also allows us to easily skip writing completely
in case `--no-write-fetch-head` was passed.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `git_config_parse_parameter` is responsible for parsing a
`foo.bar=baz`-formatted configuration key, sanitizing the key and then
processing it via the given callback function. Given that we're about to
add a second user which is going to process keys which already has keys
and values separated, this commit extracts a function
`config_parse_pair` which only does the sanitization and processing
part as a preparatory step.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We provide a function for dequoting an entire string, as well as one for
handling a space-separated list of quoted strings. But there's no way
for a caller to parse a string like 'foo'='bar', even though it is easy
to generate one using sq_quote_buf() or similar.
Let's make the single-step function available to callers outside of
quote.c. Note that we do need to adjust its implementation slightly: it
insists on seeing whitespace between items, and we'd like to be more
flexible than that. Since it only has a single caller, we can move that
check (and slurping up any extra whitespace) into that caller.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While it's already possible to pass runtime configuration via `git -c
<key>=<value>`, it may be undesirable to use when the value contains
sensitive information. E.g. if one wants to set `http.extraHeader` to
contain an authentication token, doing so via `-c` would trivially leak
those credentials via e.g. ps(1), which typically also shows command
arguments.
To enable this usecase without leaking credentials, this commit
introduces a new switch `--config-env=<key>=<envvar>`. Instead of
directly passing a value for the given key, it instead allows the user
to specify the name of an environment variable. The value of that
variable will then be used as value of the key.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to create an incremental bundle, we need to pass many arguments
to let git-bundle ignore some already packed commits. It will be more
convenient to pass args via stdin. But the current implementation does
not allow us to do this.
This is because args are parsed twice when creating bundle. The first
time for parsing args is in `compute_and_write_prerequisites()` by
running `git-rev-list` command to write prerequisites in bundle file,
and stdin is consumed in this step if "--stdin" option is provided for
`git-bundle`. Later nothing can be read from stdin when running
`setup_revisions()` in `create_bundle()`.
The solution is to parse args once by removing the entire function
`compute_and_write_prerequisites()` and then calling function
`setup_revisions()`. In order to write prerequisites for bundle, will
call `prepare_revision_walk()` and `traverse_commit_list()`. But after
calling `prepare_revision_walk()`, the object array `revs.pending` is
left empty, and the following steps could not work properly with the
empty object array (`revs.pending`). Therefore, make a copy of `revs`
to `revs_copy` for later use right after calling `setup_revisions()`.
The copy of `revs_copy` is not a deep copy, it shares the same objects
with `revs`. The object array of `revs` has been cleared, but objects
themselves are still kept. Flags of objects may change after calling
`prepare_revision_walk()`, we can use these changed flags without
calling the `git rev-list` command and parsing its output like the
former implementation.
Also add testcases for git bundle in t6020, which read args from stdin.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git rev-list` will list one commit for the following command:
$ git rev-list 'main^!'
<tip-commit-of-main-branch>
But providing the same rev-list args to `git bundle`, fail to create
a bundle file.
$ git bundle create - 'main^!'
# v2 git bundle
-<OID> <one-line-message>
fatal: Refusing to create empty bundle.
This is because when removing duplicate objects in function
`object_array_remove_duplicates()`, one unique pending object which has
the same name is deleted by mistake. The revision arg 'main^!' in the
above example is parsed by `handle_revision_arg()`, and at lease two
different objects will be appended to `revs.pending`, one points to the
parent commit of the "main" branch, and the other points to the tip
commit of the "main" branch. These two objects have the same name
"main". Only one object is left with the name "main" after calling the
function `object_array_remove_duplicates()`.
And what's worse, when adding boundary commits into pending list, we use
one-line commit message as names, and the arbitory names may surprise
git-bundle.
Only comparing objects themselves (".item") is also not good enough,
because user may want to create a bundle with two identical objects but
with different reference names, such as: "HEAD" and "refs/heads/main".
Add new function `contains_object()` which compare both the address and
the name of the object.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move git-bundle related functions from t5510 to a library, and this lib
will be shared with a new testcase t6020 which finds a known breakage of
"git-bundle".
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This sequence works
$ git checkout -b newbranch
$ git commit --allow-empty -m one
$ git show -s newbranch@{1}
and shows the state that was immediately after the newbranch was
created.
But then if you do
$ git reflog expire --expire=now refs/heads/newbranch
$ git commit --allow=empty -m two
$ git show -s newbranch@{1}
you'd be scolded with
fatal: log for 'newbranch' only has 1 entries
While it is true that it has only 1 entry, we have enough
information in that single entry that records the transition between
the state in which the tip of the branch was pointing at commit
'one' to the new commit 'two' built on it, so we should be able to
answer "what object newbranch was pointing at?". But we refuse to
do so.
Make @{0} the special case where we use the new side to look up that
entry. Otherwise, look up @{n} using the old side of the (n-1)th entry
of the reflog.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This block of code is duplicated twice. In a future commit, it will be
duplicated for a third time. Factor out the common functionality into
set_read_ref_cutoffs().
In the case of read_ref_at_ent(), we are incrementing `cb->reccnt` at the
beginning of the function. Move these to right before the return so that
the `cb->reccnt - 1` is changed to `cb->reccnt` and it can be cleanly
factored out into set_read_ref_cutoffs(). The duplication of the
increment statements will be removed in a future patch.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a bunch of test cases in 't7800-difftool.sh' we 'grep' for specific
filenames in 'git difftool's output, and those test cases are prone to
occasional failures because those filenames might be part of the name
of difftool's temporary directory as well, e.g.:
+git difftool --dir-diff --no-symlinks --extcmd ls v1
+grep sub output
+test_line_count = 2 sub-output
test_line_count: line count for sub-output != 2
/tmp/git-difftool.Ssubfq/left/:
sub
/tmp/git-difftool.Ssubfq/right/:
sub
error: last command exited with $?=1
not ok 50 - difftool --dir-diff v1 from subdirectory --no-symlinks
Fix this by tightening the 'grep' patterns looking for those
interesting filenames to match only lines where a filename stands on
its own.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A 3-year old test that was not testing anything useful has been
corrected.
* fc/t6030-bisect-reset-removes-auxiliary-files:
test: bisect-porcelain: fix location of files
"git worktree repair" learned to deal with the case where both the
repository and the worktree moved.
* es/worktree-repair-both-moved:
worktree: teach `repair` to fix multi-directional breakage
The ORT merge strategy learned to synthesize virtual ancestor tree
by recursively merging multiple merge bases together, just like the
recursive backend has done for years.
* en/merge-ort-recursive:
merge-ort: implement merge_incore_recursive()
merge-ort: make clear_internal_opts() aware of partial clearing
merge-ort: copy a few small helper functions from merge-recursive.c
commit: move reverse_commit_list() from merge-recursive
When a user does not tell "git pull" to use rebase or merge, the
command gives a loud message telling a user to choose between
rebase or merge but creates a merge anyway, forcing users who would
want to rebase to redo the operation. Fix an early part of this
problem by tightening the condition to give the message---there is
no reason to stop or force the user to choose between rebase or
merge if the history fast-forwards.
* fc/pull-merge-rebase:
pull: display default warning only when non-ff
pull: correct condition to trigger non-ff advice
pull: get rid of unnecessary global variable
pull: give the advice for choosing rebase/merge much later
pull: refactor fast-forward check
More "ORT" merge strategy.
* en/merge-ort-2:
merge-ort: add modify/delete handling and delayed output processing
merge-ort: add die-not-implemented stub handle_content_merge() function
merge-ort: add function grouping comments
merge-ort: add a paths_to_free field to merge_options_internal
merge-ort: add a path_conflict field to merge_options_internal
merge-ort: add a clear_internal_opts helper
merge-ort: add a few includes
The merge backend "done right" starts to emerge.
* en/merge-ort-impl:
merge-ort: free data structures in merge_finalize()
merge-ort: add implementation of record_conflicted_index_entries()
tree: enable cmp_cache_name_compare() to be used elsewhere
merge-ort: add implementation of checkout()
merge-ort: basic outline for merge_switch_to_result()
merge-ort: step 3 of tree writing -- handling subdirectories as we go
merge-ort: step 2 of tree writing -- function to create tree object
merge-ort: step 1 of tree writing -- record basenames, modes, and oids
merge-ort: have process_entries operate in a defined order
merge-ort: add a preliminary simple process_entries() implementation
merge-ort: avoid recursing into identical trees
merge-ort: record stage and auxiliary info for every path
merge-ort: compute a few more useful fields for collect_merge_info
merge-ort: avoid repeating fill_tree_descriptor() on the same tree
merge-ort: implement a very basic collect_merge_info()
merge-ort: add an err() function similar to one from merge-recursive
merge-ort: use histogram diff
merge-ort: port merge_start() from merge-recursive
merge-ort: add some high-level algorithm structure
merge-ort: setup basic internal data structures
Various improvements to the codepath that writes out pack bitmaps.
* tb/pack-bitmap: (24 commits)
pack-bitmap-write: better reuse bitmaps
pack-bitmap-write: relax unique revwalk condition
pack-bitmap-write: use existing bitmaps
pack-bitmap: factor out 'add_commit_to_bitmap()'
pack-bitmap: factor out 'bitmap_for_commit()'
pack-bitmap-write: ignore BITMAP_FLAG_REUSE
pack-bitmap-write: build fewer intermediate bitmaps
pack-bitmap.c: check reads more aggressively when loading
pack-bitmap-write: rename children to reverse_edges
t5310: add branch-based checks
commit: implement commit_list_contains()
bitmap: implement bitmap_is_subset()
pack-bitmap-write: fill bitmap with commit history
pack-bitmap-write: pass ownership of intermediate bitmaps
pack-bitmap-write: reimplement bitmap writing
ewah: add bitmap_dup() function
ewah: implement bitmap_or()
ewah: make bitmap growth less aggressive
ewah: factor out bitmap growth
rev-list: die when --test-bitmap detects a mismatch
...
The "--format=%(trailers)" mechanism gets enhanced to make it
easier to design output for machine consumption.
* ab/trailers-extra-format:
pretty format %(trailers): add a "key_value_separator"
pretty format %(trailers): add a "keyonly"
pretty-format %(trailers): fix broken standalone "valueonly"
pretty format %(trailers) doc: avoid repetition
pretty format %(trailers) test: split a long line
When the `--super-prefix` option was implmented in 74866d7579 (git: make
super-prefix option, 2016-10-07), its existence was only documented in
the manpage but not in the command's own usage string. Given that the
commit message didn't mention that this was done intentionally and given
that it's documented in the manpage, this seems like an oversight.
Add it to the usage string to fix the inconsistency.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that mktag has been migrated to use the fsck machinery to check
its input, it makes sense to teach it to run in the equivalent of "git
fsck"'s default mode.
For cases where mktag is used to (re)create a tag object using data
from an existing and malformed tag object, the validation may
optionally have to be loosened. Teach the command to take the
"--[no-]strict" option to do so.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the errors mktag might emit for translation. This is a plumbing
command, but the errors it emits are intended to be human-readable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the "mktag" command to use parse-options.h instead of its own
ad-hoc argc handling. This doesn't matter much in practice since it
doesn't support any options, but removes another special-case in our
codebase, and makes it easier to add options to it in the future.
It does marginally improve the situation for programs that want to
execute git commands in a consistent manner and e.g. always use
--end-of-options. E.g. "gitaly" does that, and has a blacklist of
built-ins that don't support --end-of-options. This is one less
special case for it and other similar programs to support.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change mktag's acceptance rules to accept an empty body without an
empty line after the header again. This fixes an ancient unintended
dregression in "mktag".
When "mktag" was introduced in ec4465adb3 (Add "tag" objects that can
be used to sign other objects., 2005-04-25) the input checks were much
looser. When it was documented it 6cfec03680 (mktag: minimally update
the description., 2007-06-10) it was clearly intended for this \n to
be optional:
The message, when [it] exists, is separated by a blank line from
the header.
But then in e0aaf781f6 (mktag.c: improve verification of tagger field
and tests, 2008-03-27) this was made an error, seemingly by
accident. It was just a result of the general header checks, and all
the tests after that patch have a trailing empty line (but did not
before).
Let's allow this again, and tweak the test semantics changed in
e0aaf781f6 to remove the redundant empty line. New tests added in
previous commits of mine already added an explicit test for allowing
the empty line between header and body.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In earlier commits mktag learned to use the fsck machinery, at which
point we needed to add fsck.extraHeaderEntry so it could be as strict
about extra headers as it's been ever since it was implemented.
But it's not nice to need to switch away from "mktag" to "hash-object"
+ manual "fsck" just because you'd like to have an extra header. So
let's support turning it off by getting "fsck.*" variables from the
config.
Pedantically speaking it's still not possible to make "mktag" behave
just like "hash-object -t tag" does, since we're unconditionally going
to check the referenced object in verify_object_in_tag(), which is our
own check, and not one that exists in fsck.c.
But the spirit of "this works like fsck" is preserved, in that if you
created such a tag with "hash-object" and did a full "fsck" on the
repository it would also error out about that invalid object, it just
wouldn't emit the same message as fsck does.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the fsck_config() function from builtin/fsck.c to fsck.[ch]. This
allows for re-using it in other tools that expose fsck logic and want
to support its configuration variables.
A logical continuation of this change would be to use a common
function for all of {fetch,receive}.fsck.* and fsck.*. See
5d477a334a (fsck (receive-pack): allow demoting errors to warnings,
2015-06-22) and my own 1362df0d41 (fetch: implement fetch.fsck.*,
2018-07-27) for the relevant code.
However, those routines want to not parse the fsck.skipList into OIDs,
but rather pass them along with the --strict option to another
process. It would be possible to refactor that whole thing so we
support e.g. a "fetch." prefix, then just keep track of the skiplist
as a filename instead of parsing it, and learn to spew that all out
from our internal structures into something we can append to the
--strict option.
But instead I'm planning to re-use this in "mktag", which'll just
re-use these "fsck.*" variables as-is.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the validation logic in "mktag" to use fsck's fsck_tag()
instead of its own custom parser. Curiously the logic for both dates
back to the same commit[1]. Let's unify them so we're not maintaining
two sets functions to verify that a tag is OK.
The behavior of fsck_tag() and the old "mktag" code being removed here
is different in few aspects.
I think it makes sense to remove some of those checks, namely:
A. fsck only cares that the timezone matches [-+][0-9]{4}. The mktag
code disallowed values larger than 1400.
Yes there's currently no timezone with a greater offset[2], but
since we allow any number of non-offical timezones (e.g. +1234)
passing this through seems fine. Git also won't break in the
future if e.g. French Polynesia decides it needs to outdo the Line
Islands when it comes to timezone extravagance.
B. fsck allows missing author names such as "tagger <email>", mktag
wouldn't, but would allow e.g. "tagger [2 spaces] <email>" (but
not "tagger [1 space] <email>"). Now we allow all of these.
C. Like B, but "mktag" disallowed spaces in the <email> part, fsck
allows it.
In some ways fsck_tag() is stricter than "mktag" was, namely:
D. fsck disallows zero-padded dates, but mktag didn't care. So
e.g. the timestamp "0000000000 +0000" produces an error now. A
test in "t1006-cat-file.sh" relied on this, it's been changed to
use "hash-object" (without fsck) instead.
There was one check I deemed worth keeping by porting it over to
fsck_tag():
E. "mktag" did not allow any custom headers, and by extension (as an
empty commit is allowed) also forbade an extra stray trailing
newline after the headers it knew about.
Add a new check in the "ignore" category to fsck and use it. This
somewhat abuses the facility added in efaba7cc77 (fsck:
optionally ignore specific fsck issues completely, 2015-06-22).
This is somewhat of hack, but probably the least invasive change
we can make here. The fsck command will shuffle these categories
around, e.g. under --strict the "info" becomes a "warn" and "warn"
becomes "error". Existing users of fsck's (and others,
e.g. index-pack) --strict option rely on this.
So we need to put something into a category that'll be ignored by
all existing users of the API. Pretending that
fsck.extraHeaderEntry=error ("ignore" by default) was set serves
to do this for us.
1. ec4465adb3 (Add "tag" objects that can be used to sign other
objects., 2005-04-25)
2. https://en.wikipedia.org/wiki/List_of_UTC_time_offsets
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces no functional change, but refactors the print-out of
the hash at the end to do the same thing with less code.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This minor stylistic churn is usually something we'd avoid, but if we
don't do this then the file after changes in subsequent commits will
only have this minor style inconsistency, so let's change this while
we're at it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the hardcoded hint of 2^12 to 0. The default strbuf hint is
perfectly fine here, and the only reason we were hardcoding it is
because it survived migration from a pre-strbuf fixed-sized buffer.
See fd17f5b5f7 (Replace all read_fd use with strbuf_read, and get rid
of it., 2007-09-10) for that migration.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests to demonstrate what "mktag" does in the face of replaced
objects.
There was an existing test for replaced objects fed to "mktag" added
in cc400f5011 (mktag: call "check_sha1_signature" with the
replacement sha1, 2009-01-23), but that one only tests a
commit->commit mapping. Not a mapping to a different type as like
we're also testing for here. We could remove the "mktag" test in
t6050-replace.sh now if the created tag wasn't being used by a
subsequent "fsck" test.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The verify_object() function in "mktag.c" is tasked with ensuring that
our tag refers to a valid object.
The existing test for this might fail because it was also testing that
"type taggg" didn't refer to a valid object type (it should be "type
tag"), or because we referred to a valid object but got the type
wrong.
Let's split these tests up, so we're testing all combinations of a
non-existing object and in invalid/wrong "type" lines.
We need to provide GIT_TEST_GETTEXT_POISON=false here because the
"invalid object type" error is emitted by
parse_loose_header_extended(), which has that message already marked
for translation. Another option would be to use test_i18ngrep, but I
prefer always running the test, not skipping it under gettext poison
testing.
I'm not testing this in combination with "git replace". That'll be
done in a subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change all the successful "mktag" tests to test that "hash-object"
produces the same hash for the input, and that fsck passes for
both.
This tests e.g. that "mktag" doesn't trim its input or otherwise munge
it in a way that "hash-object" doesn't.
Since we're doing an "fsck --strict" here at the end let's incorporate
the creation of the "mytag" name into this test, removing the
special-case at the end of the file.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for a couple of whitespace edge cases around the header/body
boundary.
I consider the requirement for a blank line before the empty body a
bug, it's a long-standing regression which goes against the command's
documented behavior. This bug will be addressed in a follow-up change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the last test in the file to run an "fsck --strict" after
creating the tag at the end.
We're just doing this for good measure to check that fsck behaves as
expected now that there's finally a reference for our valid tag. Other
tests going to be checking this elsewhere, but it's nice to cover all
the edge cases in this test to make it as self-contained as possible.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a test added in e0aaf781f6 (mktag.c: improve verification of
tagger field and tests, 2008-03-27) to not create "mytag", which
should only be created and verified at the end in an earlier test
added in 446c6faec6 (New tests and en-passant modifications to mktag.,
2006-07-29).
While we're at it let's prevent a similar logic error from creeping
into the test by asserting that "mytag" doesn't exist before we create
it. Let's do this by moving the test to use "update-ref", instead of
our own homebrew ad-hoc refstore update.
We're not really testing for anything yet by creating the tag at the
end here. A subsequent commit will change that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the redirection of stderr to "message" in the valid tag
test. This pattern seems to have been copy/pasted from the failure
case in 446c6faec6 (New tests and en-passant modifications to mktag.,
2006-07-29).
While I'm at it do the same for the "replace" tests. The tag creation
I'm changing here seems to have been copy/pasted from the "mktag"
tests to those tests in cc400f5011 (mktag: call
"check_sha1_signature" with the replacement sha1, 2009-01-23).
Nobody examines the contents of the resulting "message" file, so the
net result is that error messages cannot be seen in "sh t3800-mktag.sh
-v" output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the tests amended in acb49d1cc8 (t3800: make hash-size
independent, 2019-08-18) even more to make them independent of either
SHA-1 or SHA-256.
Some of these tests were failing for the wrong reasons. The first one
being modified here would fail because the line starts with "xxxxxx"
instead of "object", the rest of the line doesn't matter.
Let's just put a valid hash on the rest of the line anyway to narrow
the test down for just the s/object/xxxxxx/ case.
The second one being modified here would fail under
GIT_TEST_DEFAULT_HASH=sha256 because <some sha-1 length garbage> is an
invalid SHA-256, but we should really be testing <some sha-256 length
garbage> when under SHA-256.
This doesn't really matter since we should be able to trust other
parts of the code to validate things in the 0-9a-f range, but let's
keep it for good measure.
There's a later test which tests an invalid SHA which looks like a
valid one, to stress the "We refuse to tag something we can't
verify[...]" logic in mktag.c.
But here we're testing for a SHA-length string which contains
characters outside of the /[0-9a-f]/i set.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace ad-hoc setup of a single commit in the "mktag" tests with our
standard helper pattern. The old setup dated back to 446c6faec6 (New
tests and en-passant modifications to mktag., 2006-07-29) before the
helper existed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The use of a subshell dates back to e9b20943b7 (t/t3800: do not use a
temporary file to hold expected result., 2008-01-04). It's not needed
anymore, if it ever was.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the mktag documentation to compare itself to the similar
"hash-object -t tag" command. Before this someone reading the
documentation wouldn't have much of an idea what the difference
was.
Let's allude to our own validation logic, and cross-link the "mktag"
and "hash-object" documentation to aid discover-ability. A follow-up
change to migrate "mktag" to use "fsck" validation will make the part
about validation logic clearer.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's background maintenance uses cron by default, but this is not
available on Windows. Instead, integrate with Task Scheduler.
Tasks can be scheduled using the 'schtasks' command. There are several
command-line options that can allow for some advanced scheduling, but
unfortunately these seem to all require authenticating using a password.
Instead, use the "/xml" option to pass an XML file that contains the
configuration for the necessary schedule. These XML files are based on
some that I exported after constructing a schedule in the Task Scheduler
GUI. These options only run background maintenance when the user is
logged in, and more fields are populated with the current username and
SID at run-time by 'schtasks'.
Since the GIT_TEST_MAINT_SCHEDULER environment variable allows us to
specify 'schtasks' as the scheduler, we can test the Windows-specific
logic on other platforms. Thus, add a check that the XML file written
by Git is valid when xmllint exists on the system.
Since we use a temporary file for the XML files sent to 'schtasks', we
prefix the random characters with the frequency so it is easier to
examine the proper file during tests. Instead of an exact match on the
'args' file, we 'grep' for the arguments other than the filename.
There is a deficiency in the current design. Windows has two kinds of
applications: GUI applications that start by "winmain()" and console
applications that start by "main()". Console applications are attached
to a new Console window if they are not already associated with a GUI
application. This means that every hour the scheudled task launches a
command window for the scheduled tasks. Not only is this visually
obtrusive, but it also takes focus from whatever else the user is
doing!
A simple fix would be to insert a GUI application that acts as a shim
between the scheduled task and Git. This is currently possible in Git
for Windows by setting the <Command> tag equal to
C:\Program Files\Git\git-bash.exe
with options "--hide --no-needs-console --command=cmd\git.exe"
followed by the arguments currently used. Since git-bash.exe is not
included in Windows builds of core Git, I chose to leave out this
feature. My plan is to submit a small patch to Git for Windows that
converts the use of git.exe with this use of git-bash.exe in the
short term. In the long term, we can consider creating this GUI
shim application within core Git, perhaps in contrib/.
Co-authored-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing mechanism for scheduling background maintenance is done
through cron. The 'crontab -e' command allows updating the schedule
while cron itself runs those commands. While this is technically
supported by macOS, it has some significant deficiencies:
1. Every run of 'crontab -e' must request elevated privileges through
the user interface. When running 'git maintenance start' from the
Terminal app, it presents a dialog box saying "Terminal.app would
like to administer your computer. Administration can include
modifying passwords, networking, and system settings." This is more
alarming than what we are hoping to achieve. If this alert had some
information about how "git" is trying to run "crontab" then we would
have some reason to believe that this dialog might be fine. However,
it also doesn't help that some scenarios just leave Git waiting for
a response without presenting anything to the user. I experienced
this when executing the command from a Bash terminal view inside
Visual Studio Code.
2. While cron initializes a user environment enough for "git config
--global --show-origin" to show the correct config file information,
it does not set up the environment enough for Git Credential Manager
Core to load credentials during a 'prefetch' task. My prefetches
against private repositories required re-authenticating through UI
pop-ups in a way that should not be required.
The solution is to switch from cron to the Apple-recommended [1]
'launchd' tool.
[1] https://developer.apple.com/library/archive/documentation/MacOSX/Conceptual/BPSystemStartup/Chapters/ScheduledJobs.html
The basics of this tool is that we need to create XML-formatted
"plist" files inside "~/Library/LaunchAgents/" and then use the
'launchctl' tool to make launchd aware of them. The plist files
include all of the scheduling information, along with the command-line
arguments split across an array of <string> tags.
For example, here is my plist file for the weekly scheduled tasks:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0"><dict>
<key>Label</key><string>org.git-scm.git.weekly</string>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/git-core/git</string>
<string>--exec-path=/usr/local/libexec/git-core</string>
<string>for-each-repo</string>
<string>--config=maintenance.repo</string>
<string>maintenance</string>
<string>run</string>
<string>--schedule=weekly</string>
</array>
<key>StartCalendarInterval</key>
<array>
<dict>
<key>Day</key><integer>0</integer>
<key>Hour</key><integer>0</integer>
<key>Minute</key><integer>0</integer>
</dict>
</array>
</dict>
</plist>
The schedules for the daily and hourly tasks are more complicated
since we need to use an array for the StartCalendarInterval with
an entry for each of the six days other than the 0th day (to avoid
colliding with the weekly task), and each of the 23 hours other
than the 0th hour (to avoid colliding with the daily task).
The "Label" value is currently filled with "org.git-scm.git.X"
where X is the frequency. We need a different plist file for each
frequency.
The launchctl command needs to be aligned with a user id in order
to initialize the command environment. This must be done using
the 'launchctl bootstrap' subcommand. This subcommand is new as
of macOS 10.11, which was released in September 2015. Before that
release the 'launchctl load' subcommand was recommended. The best
source of information on this transition I have seen is available
at [2]. The current design does not preclude a future version that
detects the available fatures of 'launchctl' to use the older
commands. However, it is best to rely on the newest version since
Apple might completely remove the deprecated version on short
notice.
[2] https://babodee.wordpress.com/2016/04/09/launchctl-2-0-syntax/
To remove a schedule, we must run 'launchctl bootout' with a valid
plist file. We also need to 'bootout' a task before the 'bootstrap'
subcommand will succeed, if such a task already exists.
The need for a user id requires us to run 'id -u' which works on
POSIX systems but not Windows. Further, the need for fully-qualitifed
path names including $HOME behaves differently in the Git internals and
the external test suite. The $HOME variable starts with "C:\..." instead
of the "/c/..." that is provided by Git in these subcommands. The test
therefore has a prerequisite that we are not on Windows. The cross-
platform logic still allows us to test the macOS logic on a Linux
machine.
We can verify the commands that were run by 'git maintenance start'
and 'git maintenance stop' by injecting a script that writes the
command-line arguments into GIT_TEST_MAINT_SCHEDULER.
An earlier version of this patch accidentally had an opening
"<dict>" tag when it should have had a closing "</dict>" tag. This
was caught during manual testing with actual 'launchctl' commands,
but we do not want to update developers' tasks when running tests.
It appears that macOS includes the "xmllint" tool which can verify
the XML format. This is useful for any system that might contain
the tool, so use it whenever it is available.
We strive to make these tests work on all platforms, but Windows caused
some headaches. In particular, the value of getuid() called by the C
code is not guaranteed to be the same as `$(id -u)` invoked by a test.
This is because `git.exe` is a native Windows program, whereas the
utility programs run by the test script mostly utilize the MSYS2 runtime,
which emulates a POSIX-like environment. Since the purpose of the test
is to check that the input to the hook is well-formed, the actual user
ID is immaterial, thus we can work around the problem by making the the
test UID-agnostic. Another subtle issue is the $HOME environment
variable being a Windows-style path instead of a Unix-style path. We can
be more flexible here instead of expecting exact path matches.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Co-authored-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When __git_complete was introduced, it was meant to be temporarily, while
a proper guideline for public shell functions was established
(tentatively _GIT_complete), but since that never happened, people
in the wild started to use __git_complete, even though it was marked as
not public.
Eight years is more than enough wait, let's mark this function as
public, and make it a bit more user-friendly.
So that instead of doing:
__git_complete gk __gitk_main
The user can do:
__git_complete gk gitk
And instead of:
__git_complete gf _git_fetch
Do:
__git_complete gf git_fetch
Backwards compatibility is maintained.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the function was marked as not public, it's already used in
the wild.
We should at least test basic functionality.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1. We should quote the argument
2. We don't need two redirections
3. A safeguard for arguments (-a) would be good
Suggested-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the code more readable, and also will help when new code
wants to do similar checks.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This matches a trace_performance_enter()/trace_performance_leave() pair
added by 0d1ed59 (unpack-trees: add performance tracing, 2018-08-18).
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unpack_trees() method is quite complicated and its performance can
change dramatically depending on how it is used. We already have some
performance tracing regions, but they have not been updated to the
trace2 API. Do so now.
We already have trace2 regions in unpack_trees.c:clear_ce_flags(), which
uses a linear scan through the index without recursing into trees.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The traverse_trees() method recursively walks through trees, but also
prunes the tree-walk based on a callback. Some callers, such as
unpack_trees(), are quite complicated and can have wildly different
performance between two different commands.
Create constants that count these values and then report the results at
the end of a process. These counts are cumulative across multiple "root"
instances of traverse_trees(), but they provide reproducible values for
demonstrating improvements to the pruning algorithm when possible.
This change is modeled after a similar statistics reporting in 42e50e78
(revision.c: add trace2 stats around Bloom filter usage, 2020-04-06).
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We trace statistics about the effectiveness of changed-path Bloom
filters since 42e50e78 (revision.c: add trace2 stats around Bloom
filter usage, 2020-04-06). Add similar tracing for the topo-walk
algorithm that uses generation numbers to limit the walk size.
This information can help investigate and describe benefits to
heuristics and other changes.
The information that is printed is in JSON format and can be formatted
nicely to present as follows:
{
"count_explort_walked":2603,
"count_indegree_walked":2603,
"count_topo_walked":473
}
Each of these values count the number of commits are visited by each of
the three "stages" of the topo-walk as detailed in b4542418 (revision.c:
generation-based topo-order algorithm, 2018-11-01).
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change all remnants of "sha1" in hash-lookup.c and .h and rename them to
reflect that we're not just able to handle SHA-1 these days.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename this function to reflect that we're not just able to handle SHA-1
these days. There are a few instances of "sha1" left in sha1-lookup.[ch]
after this, but those will be addressed in the next commit.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop the last remnant of "sha1" in this file and rename it to reflect
that we're not just able to handle SHA-1 these days.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generalize the last remnants of "sha" and "sha1" in this file and rename
it to reflect that we're not just able to handle SHA-1 these days.
We need to update one test to check for an updated error string.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 25d5ea410f ("[PATCH] Redo rename/copy detection logic.",
2005-05-24) added a duplicate entry check on rename_src in order to
avoid segfaults; the code at the time was prone to double free()s and an
easy way to avoid it was just to turn off rename detection for any
duplicate entries. Note that the form of the check was modified two
commits ago in this series.
Similarly, commit 4d6be03b95 ("diffcore-rename: avoid processing
duplicate destinations", 2015-02-26) added a duplicate entry check
on rename_dst for the exact same reason -- the code was prone to double
free()s, and an easy way to avoid it was just to turn off rename
detection entirely. Note that the form of the check was modified in the
commit just before this one.
In the original code in both places, the code was dealing with
individual diff_filespecs and trying to match things up, instead of just
keeping the original diff_filepairs around as we do now. The
intervening change in structure has fixed the accounting problems and
the associated double free()s that used to occur, and thus we already
have a better fix. As such, we can remove the band-aid checks for
duplicate entries.
Due to the last two patches, the diffcore_rename() setup is no longer a
sizeable chunk of overall runtime. Thus, in a large rebase of many
commits with lots of renames and several optimizations to inexact rename
detection, this patch only speeds up the overall code by about half a
percent or so and is pretty close to the run-to-run variability making
it hard to get an exact measurement. However, with some trace2 regions
around the setup code in diffcore_rename() so that I can focus on just
it, I measure that this patch consistently saves almost a third of the
remaining time spent in diffcore_rename() setup.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some handling that explicitly considers collisions of the following
types:
* file/submodule
* file/symlink
* submodule/symlink
Leaving them as conflicts at the same path are hard for users to
resolve, so move one or both of them aside so that they each get their
own path.
Note that in the case of recursive handling (i.e. call_depth > 0), we
can just use the merge base of the two merge bases as the merge result
much like we do with modify/delete conflicts, binary files, conflicting
submodule values, and so on.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code is identical for the function body in the two files, the call
signature is just slightly different in merge-ort than merge-recursive
as noted a couple commits ago.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This implementation is based on a mixture of print_commit() and
output_commit_title() from merge-recursive.c so that it can be used to
take over both functions.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Take merge_submodule() from merge-recursive.c and make slight
adjustments, predominantly around deferring output using path_msg()
instead of using merge-recursive's output() and show() functions.
There's also a fix for recursive cases (when call_depth > 0) and a
slight change to argument order for find_first_merges().
find_first_merges() and format_commit() are left unimplemented for
now, but will be added by subsequent commits.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Take merge_3way() from merge-recursive.c and make slight adjustments
based on different data structures (direct usage of object_id
rather diff_filespec, separate pathnames which based on our careful
interning of pathnames in opt->priv->paths can be compared with '!='
rather than 'strcmp').
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This implementation is based heavily on merge_mode_and_contents() from
merge-recursive.c, though it has some fixes for recursive merges (i.e.
when call_depth > 0), and has a number of changes throughout based on
slight differences in data structures and in how the functions are
called.
It is, however, based on two new helper functions -- merge_3way() and
merge_submodule -- for which we only provide die-not-implemented stubs
at this point. Future commits will add implementations of these
functions.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to the content merge (which will go in a subsequent commit),
we need to worry about conflict messages, placing results in higher
order stages in case of a df_conflict, and making sure the results are
placed in ci->merged.result so that they will show up in the working
tree. Take care of all that external book-keeping, moving the
simplistic just-take-HEAD code into the barebones handle_content_merge()
function for now. Subsequent commits will flesh out
handle_content_merge().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement unique_path(), based on the one from merge-recursive.c. It is
simplified, however, due to: (1) using strmaps, and (2) the fact that
merge-ort lets the checkout codepath handle possible collisions with the
working tree means that other code locations don't have to.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a directory/file conflict remains, we can leave the directory where
it is, but need to move the information about the file to a different
pathname. After moving the file to a different pathname, we allow
subsequent process_entry() logic to handle any additional details that
might be relevant.
This depends on a new helper function, unique_path(), that dies with an
unimplemented error currently but will be implemented in a subsequent
commit.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When one side has a directory at a given path and the other side of
history has a file at the path, but the merge resolves the directory
away (e.g. because no path within that directory was modified and the
other side deleted it, or because renaming moved all the files
elsewhere), then we don't actually have a conflict anymore. We just
need to clear away any information related to the relevant directory,
and then the subsequent process_entry() handling can handle the given
path.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'll keep this document mostly in sync with the upstream; let's
help "git am" and "git show" by telling them that they may introduce
what we may consider whitespace errors.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows users to write hash-agnostic scripts and configs by
disabling abbreviations. Using "-c core.abbrev=40" will be
insufficient with SHA-256, and "-c core.abbrev=64" won't work with
SHA-1 repos today.
Signed-off-by: Eric Wong <e@80x24.org>
[jc: tweaked implementation, added doc and a test]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend the wording of documentation added in 6cfec03680 (mktag:
minimally update the description., 2007-06-10). It makes more sense to
say "when it exists" here, as we're referring to "the message".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "mktag" documentation to refer to the input hash as just
"hash", not "sha1". This command has supported SHA-256 for a while
now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test_export() has been self-recursive since its inception even though a
simple for-loop would have served just as well to append its arguments
to the `test_export_` variable separated by the pipe character "|".
Recently `test_export_` was changed instead to a space-separated list of
tokens to be exported, an operation which can be accomplished via a
single simple assignment, with no need for looping or recursion.
Therefore, simplify the implementation.
While at it, take advantage of the fact that variable names to be
exported are shell identifiers, thus won't be composed of special
characters or whitespace, thus simple a `$*` can be used rather than
magical `"$@"`.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option provides essential new functionality, changing diff
output to first parent only, without changing history traversal mode,
so it deserves its own test.
As we do it, add additional test that --diff-merges=first-parent by
itself doesn't imply -p and only outputs diffs for merge commits.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move description of --diff-merges option from git-log.txt to
diff-options.txt so that it is included in the git-show help.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After introduction of the --diff-merges=first-parent, the
--first-parent sets the default format for merges to the same value as
this new option. Document this behavior and add corresponding
reference to --diff-merges.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mention --diff-merges instead of -m in a note to merge formats to aid
discoverability, as -m is now described among --diff-merges options
anyway.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe all the new --diff-merges options in the git-log.txt and
adopt description of originals accordingly.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we now have --diff-merges={m|c|cc}, add --diff-merges=1 as synonym
for --diff-merges=first-parent, to have shorter mnemonics for it as
well.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds --diff-merges={m|c|cc} values that match mnemonics of old
options, for those who are used to them.
Note that, say, --diff-meres=cc behaves differently than --cc, as the
latter implies -p and therefore enables diffs for all the commits,
while the former enables output of diffs for merge commits only.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New options don't have any visible effect unless -p is either given or
implied, as unlike -c/-cc we don't imply -p with --diff-merges. To fix
this, this patch adds new functionality by letting new options enable
output of diffs for merge commits only.
Add 'merges_need_diff' field and set it whenever diff output for merges is
enabled by any of the new options.
Extend diff output logic accordingly, to output diffs for merges when
'merges_need_diff' is set even when no -p has been provided.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'combined_imply_patch' field and set it only for old --cc/-c
options, then imply -p if this flag is set instead of implying -p
whenever 'combined_merge' flag is set.
We don't want new --diff-merge options to imply -p, to make it
possible to enable output of diffs for merges independently from
non-merge commits. At the same time we want to preserve behavior of
old --c/-c/-m options and their interactions with --first-parent, to
stay backward-compatible.
This patch is first step in this direction: it separates old "--cc/-c
imply -p" logic from the rest of the options.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We first implement new options as exact synonyms for their original
counterparts, to get all the infrastructure right, and keep functional
improvements for later commits.
The following values are implemented:
--diff-merges= old equivalent
first|first-parent = --first-parent (only format implications)
sep|separate = -m
comb|combined = -c
dense| dense-combined = --cc
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
-c/--cc got precedence over -m only because of external logic where
corresponding flags are checked before that for -m. This is too
error-prone, so add code that explicitly makes these 3 options
mutually exclusive, so that the last option specified on the
command-line gets precedence.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To prepare introduction of new options some of which will be synonyms
to existing options, let every option handling code just call
corresponding function.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After getting rid of 'ignore_merges' field, the diff_merges_init_revs()
function became empty. Get rid of it.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The relevant flags were somewhat scattered over definition of 'struct
rev_info'. Rearrange them to group them together.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'ignore_merges' was 3-way field that served two distinct purposes that
we now assign to 2 new independent flags: 'separate_merges', and
'explicit_diff_merges'.
'separate_merges' tells that we need to output diff format containing
separate diff for every parent (as opposed to 'combine_merges').
'explicit_diff_merges' tells that at least one of diff-merges options
has been explicitly specified on the command line, so no defaults
should apply.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Logically, -m, -c, --cc specify 3 different formats for representing
merge commits, yet -m doesn't in fact override -c or --cc, that makes
no sense.
Fix -m to properly override -c/--cc, and change the tests accordingly.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Logically, -m, -c, --cc specify 3 different formats for representing
merge commits, yet -m doesn't in fact override -c or --cc, that makes
no sense.
Add 2 expected to fail tests that demonstrate the problem.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support to be able to specify expected failure, through :failure
magic, like this:
:failure cmd args
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not set revs->diff when we encounter an option that needs it, as
it'd be impossible to undo later. Besides, some other options than
what we handle here set this flag as well, and we'd interfere with
them trying to clear this flag later.
Rather set revs->diff, if finally needed, in diff_merges_setup_revs().
As an additional bonus, this also makes our code shorter.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move logic that handles implying -p on -c/--cc from
log_setup_revisions_tweak() to diff_merges_setup_revs(), where it
belongs.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new field allows us to separate format of diff for merges from
'first_parent_only' flag which primary purpose is limiting history
traversal.
This change further localizes diff format selection logic into the
diff-merges.c file.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call it where given functionality is needed instead of direct
checking/tweaking of diff merges related fields.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function sets all the relevant flags to disabled state, so that
no code that checks only one of them get it wrong.
Then we call this new function everywhere where diff merges output
suppression is needed.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For clarity, define public functions in the order they are called, to
make logic inter-dependencies easier to grok.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename diff_merges_default_to_enable() to
diff_merges_default_to_first_parent() to match its semantics.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The checks for first_parent_only don't in fact belong to this module,
as the primary purpose of this flag is history traversal limiting, so
get it out of this module and rename the
diff_merges_first_parent_defaults_to_enable()
to
diff_merges_default_to_enable()
to match new semantics.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the same "diff_merges" prefix for all the diff merges function
names.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create separate diff-merges.c and diff-merges.h files, and move all
the code related to handling of diff merges there.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use these implementations from show_setup_revisions_tweak() and
log_setup_revisions_tweak() in builtin/log.c.
This completes moving of management of diff merges parameters to a
single place, where we can finally observe them simultaneously.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move initialization code related to diffing merges into new
init_diff_merge_revs() function.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move all the setting code related to diffing merges into new
setup_diff_merge_revs() function.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move all the parsing code related to diffing merges into new
parse_diff_merge_opts() function.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git worktree repair` knows how to repair the two-way links between the
repository and a worktree as long as a link in one or the other
direction is sound. For instance, if a linked worktree is moved (without
using `git worktree move`), repair is possible because the worktree
still knows the location of the repository even though the repository no
longer knows where the worktree is. Similarly, if the repository is
moved, repair is possible since the repository still knows the locations
of the worktrees even though the worktrees no longer know where the
repository is.
However, if both the repository and the worktrees are moved, then links
are severed in both directions, and no repair is possible. This is the
case even when the new worktree locations are specified as arguments to
`git worktree repair`. The reason for this limitation is twofold. First,
when `repair` consults the worktree's gitfile (/path/to/worktree/.git)
to determine the corresponding <repo>/worktrees/<id>/gitdir file to fix,
<repo> is the old path to the repository, thus it is unable to fix the
`gitdir` file at its new location since it doesn't know where it is.
Second, when `repair` consults <repo>/worktrees/<id>/gitdir to find the
location of the worktree's gitfile (/path/to/worktree/.git), the path
recorded in `gitdir` is the old location of the worktree's gitfile, thus
it is unable to repair the gitfile since it doesn't know where it is.
Fix these shortcomings by teaching `repair` to attempt to infer the new
location of the <repo>/worktrees/<id>/gitdir file when the location
recorded in the worktree's gitfile has become stale but the file is
otherwise well-formed. The inference is intentionally simple-minded.
For each worktree path specified as an argument, `git worktree repair`
manually reads the ".git" gitfile at that location and, if it is
well-formed, extracts the <id>. It then searches for a corresponding
<id> in <repo>/worktrees/ and, if found, concludes that there is a
reasonable match and updates <repo>/worktrees/<id>/gitdir to point at
the specified worktree path. In order for <repo> to be known, `git
worktree repair` must be run in the main worktree or bare repository.
`git worktree repair` first attempts to repair each incoming
/path/to/worktree/.git gitfile to point at the repository, and then
attempts to repair outgoing <repo>/worktrees/<id>/gitdir files to point
at the worktrees. This sequence was chosen arbitrarily when originally
implemented since the order of fixes is immaterial as long as one side
of the two-way link between the repository and a worktree is sound.
However, for this new repair technique to work, the order must be
reversed. This is because the new inference mechanism, when it is
successful, allows the outgoing <repo>/worktrees/<id>/gitdir file to be
repaired, thus fixing one side of the two-way link. Once that side is
fixed, the other side can be fixed by the existing repair mechanism,
hence the order of repairs is now significant.
Two safeguards are employed to avoid hijacking a worktree from a
different repository if the user accidentally specifies a foreign
worktree as an argument. The first, as described above, is that it
requires an <id> match between the repository and the worktree. That
itself is not foolproof for preventing hijack, so the second safeguard
is that the inference will only kick in if the worktree's
/path/to/worktree/.git gitfile does not point at a repository.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement merge_incore_recursive(), mostly through the use of a new
helper function, merge_ort_internal(), which itself is based off
merge_recursive_internal() from merge-recursive.c.
This drops the number of failures in the testsuite when run under
GIT_TEST_MERGE_ALGORITHM=ort from around 1500 to 647.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to handle recursive merges, after merging merge-bases we need
to clear away most of the data we had built up but some of it needs to
be kept -- in particular the "output" field. Rename the function to
reflect its future change in use.
Further, since "reinitialize" means we'll be reusing the fields
immediately, take advantage of this to only partially clear maps,
leaving the hashtable allocated and pre-sized. (This may be slightly
out-of-order since the speedups aren't realized until there are far
more strmaps in use, but the patch submission process already went out
of order because of various questions and requests for strmap. Anyway,
see commit 6ccdfc2a20 ("strmap: enable faster clearing and reusing of
strmaps", 2020-11-05), for performance details about the use of
strmap_partial_clear().)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a subsequent commit, we will implement the traditional recursiveness
that gave merge-recursive its name, namely merging non-unique
merge-bases to come up with a single virtual merge base. Copy a few
helper functions from merge-recursive.c that we will use in the
implementation.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to display the annoying warning on every pull... only
the ones that are not fast-forward.
The current warning tests still pass, but not because of the arguments
or the configuration, but because they are all fast-forward.
We need to test non-fast-forward situations now.
Suggestions-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the advise() call that teaches users how they can choose
between merge and rebase into a helper function. This revealed that
the caller's logic needs to be further clarified to allow future
actions (like "erroring out" instead of the current "go ahead and
merge anyway") that should happen whether the advice message is
squelched out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is easy enough to do, and gives a more descriptive name to the
variable that is scoped in a more focused way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement cases where renames are involved in type changes (i.e. the
side of history that didn't rename the file changed its type from a
regular file to a symlink or submodule). There was some code to handle
this in merge-recursive but only in the special case when the renamed
file had no content changes. The code here works differently -- it
knows process_entry() can handle mode conflicts, so it does a few
minimal tweaks to ensure process_entry() can just finish the job as
needed.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement handling of normal renames. This code replaces the following
from merge-recurisve.c:
* the code relevant to RENAME_NORMAL in process_renames()
* the RENAME_NORMAL case of process_entry()
Also, there is some shared code from merge-recursive.c for multiple
different rename cases which we will no longer need for this case (or
other rename cases):
* handle_rename_normal()
* setup_rename_conflict_info()
The consolidation of four separate codepaths into one is made possible
by a change in design: process_renames() tweaks the conflict_info
entries within opt->priv->paths such that process_entry() can then
handle all the non-rename conflict types (directory/file, modify/delete,
etc.) orthogonally. This means we're much less likely to miss special
implementation of some kind of combination of conflict types (see
commits brought in by 66c62eaec6 ("Merge branch 'en/merge-tests'",
2020-11-18), especially commit ef52778708 ("merge tests: expect improved
directory/file conflict handling in ort", 2020-10-26) for more details).
That, together with letting worktree/index updating be handled
orthogonally in the merge_switch_to_result() function, dramatically
simplifies the code for various special rename cases.
(To be fair, the code for handling normal renames wasn't all that
complicated beforehand, but it's still much simpler now.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement rename/rename(2to1) and rename/add handling, i.e. a file is
renamed into a location where another file is added (with that other
file either being a plain add or itself coming from a rename). Note
that rename collisions can also have a special case stacked on top: the
file being renamed on one side of history is deleted on the other
(yielding either a rename/add/delete conflict or perhaps a
rename/rename(2to1)/delete[/delete]) conflict.
One thing to note here is that when there is a double rename, the code
in question only handles one of them at a time; a later iteration
through the loop will handle the other. After they've both been
handled, process_entry()'s normal add/add code can handle the collision.
This code replaces the following from merge-recurisve.c:
* all the 2to1 code in process_renames()
* the RENAME_TWO_FILES_TO_ONE case of process_entry()
* handle_rename_rename_2to1()
* handle_rename_add()
Also, there is some shared code from merge-recursive.c for multiple
different rename cases which we will no longer need for this case (or
other rename cases):
* handle_file_collision()
* setup_rename_conflict_info()
The consolidation of six separate codepaths into one is made possible
by a change in design: process_renames() tweaks the conflict_info
entries within opt->priv->paths such that process_entry() can then
handle all the non-rename conflict types (directory/file, modify/delete,
etc.) orthogonally. This means we're much less likely to miss special
implementation of some kind of combination of conflict types (see
commits brought in by 66c62eaec6 ("Merge branch 'en/merge-tests'",
2020-11-18), especially commit ef52778708 ("merge tests: expect improved
directory/file conflict handling in ort", 2020-10-26) for more details).
That, together with letting worktree/index updating be handled
orthogonally in the merge_switch_to_result() function, dramatically
simplifies the code for various special rename cases.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement rename/delete conflicts, i.e. one side renames a file and the
other deletes the file. This code replaces the following from
merge-recurisve.c:
* the code relevant to RENAME_DELETE in process_renames()
* the RENAME_DELETE case of process_entry()
* handle_rename_delete()
Also, there is some shared code from merge-recursive.c for multiple
different rename cases which we will no longer need for this case (or
other rename cases):
* handle_change_delete()
* setup_rename_conflict_info()
The consolidation of five separate codepaths into one is made possible
by a change in design: process_renames() tweaks the conflict_info
entries within opt->priv->paths such that process_entry() can then
handle all the non-rename conflict types (directory/file, modify/delete,
etc.) orthogonally. This means we're much less likely to miss special
implementation of some kind of combination of conflict types (see
commits brought in by 66c62eaec6 ("Merge branch 'en/merge-tests'",
2020-11-18), especially commit ef52778708 ("merge tests: expect improved
directory/file conflict handling in ort", 2020-10-26) for more details).
That, together with letting worktree/index updating be handled
orthogonally in the merge_switch_to_result() function, dramatically
simplifies the code for various special rename cases.
To be fair, there is a _slight_ tweak to process_entry() here, because
rename/delete cases will also trigger the modify/delete codepath.
However, we only want a modify/delete message to be printed for a
rename/delete conflict if there is a content change in the renamed file
in addition to the rename. So process_renames() and process_entry()
aren't quite fully orthogonal, but they are pretty close.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement rename/rename(1to2) handling, i.e. both sides of history
renaming a file and rename it differently. This code replaces the
following from merge-recurisve.c:
* all the 1to2 code in process_renames()
* the RENAME_ONE_FILE_TO_TWO case of process_entry()
* handle_rename_rename_1to2()
Also, there is some shared code from merge-recursive.c for multiple
different rename cases which we will no longer need for this case (or
other rename cases):
* handle_file_collision()
* setup_rename_conflict_info()
The consolidation of five separate codepaths into one is made possible
by a change in design: process_renames() tweaks the conflict_info
entries within opt->priv->paths such that process_entry() can then
handle all the non-rename conflict types (directory/file, modify/delete,
etc.) orthogonally. This means we're much less likely to miss special
implementation of some kind of combination of conflict types (see
commits brought in by 66c62eaec6 ("Merge branch 'en/merge-tests'",
2020-11-18), especially commit ef52778708 ("merge tests: expect improved
directory/file conflict handling in ort", 2020-10-26) for more details).
That, together with letting worktree/index updating be handled
orthogonally in the merge_switch_to_result() function, dramatically
simplifies the code for various special rename cases.
To be fair, there is a _slight_ tweak to process_entry() here to make
sure that the two different paths aren't marked as clean but are left in
a conflicted state. So process_renames() and process_entry() aren't
quite entirely orthogonal, but they are pretty close.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement rename/rename(1to1) handling, i.e. both sides of history
renaming a file but renaming the same way. This code replaces the
following from merge-recurisve.c:
* all the 1to1 code in process_renames()
* the RENAME_ONE_FILE_TO_ONE case of process_entry()
Also, there is some shared code from merge-recursive.c for multiple
different rename cases which we will no longer need for this case (or
other rename cases):
* handle_rename_normal()
* setup_rename_conflict_info()
The consolidation of four separate codepaths into one is made possible
by a change in design: process_renames() tweaks the conflict_info
entries within opt->priv->paths such that process_entry() can then
handle all the non-rename conflict types (directory/file, modify/delete,
etc.) orthogonally. This means we're much less likely to miss special
implementation of some kind of combination of conflict types (see
commits brought in by 66c62eaec6 ("Merge branch 'en/merge-tests'",
2020-11-18), especially commit ef52778708 ("merge tests: expect improved
directory/file conflict handling in ort", 2020-10-26) for more details).
That, together with letting worktree/index updating be handled
orthogonally in the merge_switch_to_result() function, dramatically
simplifies the code for various special rename cases.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The subcommand is unusably slow and the reason why nobody reports it
as a performance bug is suspected to be the absense of users. Let's
show a big message that asks the user to tell us that they still
care about the command when an attempt is made to run the command,
with an escape hatch to override it with a command line option.
In a few releases, we may turn it into an error and keep it for a
few more releases before finally removing it (during the whole time,
the plan to remove it would be interrupted by end user raising hand).
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
register_rename_src() simply references the passed pair inside
rename_src. In contrast, add_rename_dst() did something entirely
different for rename_dst. Instead of copying the passed pair, it made a
copy of the second diff_filespec from the passed pair, referenced it,
and then set the diff_rename_dst.pair field to NULL. Later, when a
pairing is found, record_rename_pair() allocated a full diff_filepair
via diff_queue() and pointed its src and dst fields at the appropriate
diff_filespecs. This contrast between register_rename_src() for the
rename_src data structure and add_rename_dst() for the rename_dst data
structure is oddly inconsistent and requires more memory and work than
necessary. Let's just reference the original diff_filepair in
rename_dst as-is, just as we do with rename_src. Add a new
rename_dst.is_rename field, since the rename_dst.p field is never NULL
unlike the old rename_dst.pair field.
Taking advantage of this change and the fact that same-named paths will
be adjacent, we can get rid of the sorting of the array and most of the
lookups on it, allowing us to instead just append as we go. However,
there is one remaining reason to still keep locate_rename_dst():
handling broken pairs (i.e. when break detection is on). Those are
somewhat rare, but we can set up a simple strintmap to get the map
between the source and the index. Doing that allows us to still have a
fast lookup without sorting the rename_dst array. Since the sorting had
been done in a weakly quadratic manner, when many renames are involved
this time could add up.
There is still a strcmp() in add_rename_dst() that I have left in place
to make it easier to verify that the algorithm has the same results.
This strcmp() is there to check for duplicate destination entries (which
was the easiest way at the time to avoid segfaults in the
diffcore-rename code when trees had multiple entries at a given path).
The underlying double free()s are no longer an issue with the new
algorithm, but that can be addressed in a subsequent commit.
This patch is being submitted in a different order than its original
development, but in a large rebase of many commits with lots of renames
and with several optimizations to inexact rename detection, both setup
time and write back to output queue time from diffcore_rename() were
sizeable chunks of overall runtime. This patch accelerated the setup
time by about 65%, and final write back to the output queue time by
about 50%, resulting in an overall drop of 3.5% on the execution time of
rebasing a few dozen patches.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
register_rename_src() took pains to create an array in rename_src which
was sorted by pathname of the contained diff_filepair. The sorting was
entirely unnecessary since callers pass filepairs to us in sorted
order. We can simply append to the end of the rename_src array,
speeding up diffcore_rename() setup time.
Also, note that I dropped the return type on the function since it was
unconditionally discarded anyway.
This patch is being submitted in a different order than its original
development, but in a large rebase of many commits with lots of renames
and with several optimizations to inexact rename detection,
diffcore_rename() setup time was a sizeable chunk of overall runtime.
This patch dropped execution time of rebasing 35 commits with lots of
renames by 2% overall.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While creating the last commit, I found a number of other cases where
git would segfault when faced with trees that have duplicate entries.
None of these segfaults are in the diffcore-rename code (they all occur
in cache-tree and unpack-trees). Further, to my knowledge, no one has
ever been adversely affected by these bugs, and given that it has been
15 years and folks have fixed a few other issues with historical
duplicate entries (as noted in the last commit), I am not sure we will
ever run into anyone having problems with these. So I am not sure these
are worth fixing, but it doesn't hurt to at least document these
failures in the same test file that is concerned with duplicate tree
entries.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 4d6be03b95 ("diffcore-rename: avoid processing duplicate
destinations", 2015-02-26) added t4058 to demonstrate that a workaround
it added to avoid double frees (namely to just turn off rename detection
when trees had duplicate entries) would indeed avoid segfaults. The
tests, though, give the impression that the expected diffs are "correct"
when in reality they are just "don't segfault, and do something
semi-reasonable under the circumstances". Add some notes to make this
clearer.
Also, commit 25d5ea410f ("[PATCH] Redo rename/copy detection logic.",
2005-05-24) added a similar workaround to avoid segfaults, but for
rename_src rather than rename_dst. I do not see any tests in the
testsuite to cover the collision detection of entries limited to the
source side, so add a couple.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inexact rename detection works by comparing all sources to all
destinations, computing similarities, and then finding the best matches
among those that are sufficiently similar.
However, it is preceded by exact rename detection that works by
checking if there are files with identical hashes. If exact renames are
found, we can exclude some files from inexact rename detection.
The inexact rename detection loops over the full set of files, but
immediately skips those for which rename_dst[i].is_rename is true and
thus doesn't compare any sources to that destination. As such, these
paths shouldn't be included in the progress counter.
For the eagle eyed, this change hints at an actual optimization -- the
first one I presented at Git Merge 2020. I'll be submitting that
optimization later, once the basic merge-ort algorithm has merged.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diffcore-rename had two different checks of the form
if ((a < limit || b < limit) &&
a * b <= limit * limit)
This can be simplified to
if (st_mult(a, b) <= st_mult(limit, limit))
which makes it clearer how we are checking for overflow, and makes it
much easier to parse given the drop from 8 to 4 variable appearances.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
too_many_rename_candidates() got the number of rename destinations via
an argument to the function, but the number of rename sources via a
global variable. That felt rather inconsistent. Pass in the number of
rename sources as an argument as well.
While we are at it... We had a local variable, num_src, that served two
purposes. Initially it was set to the global value, but later was used
for counting a subset of the number of sources. Since we now have a
function argument for the former usage, introduce a clearer variable
name for the latter usage.
This patch has no behavioral changes; it's just renaming and passing an
argument instead of grabbing it from the global namespace. (You may
find it easier to view the patch using git diff's --color-words option.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our main data structures are rename_src and rename_dst. For counters of
these data structures, num_sources and num_destinations seem natural;
definitely more so than using num_create for the latter.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eventually we want to be omit the advice when we can fast-forward
in which case there is no reason to require the user to choose
between rebase or merge.
In order to do so, we need to delay giving the advice up to the
point where we can check if we can fast-forward or not.
Additionally, config_get_rebase() was probably never its true home.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We would like to be able to make this check before the decision to
rebase is made in a future step. Besides, using a separate helper
makes the code easier to follow.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add code which determines which kind of special rename case each rename
corresponds to, but leave the handling of each type unimplemented for
now. Future commits will implement each one.
There is some tenuous resemblance to merge-recursive's
process_renames(), but comparing the two is very unlikely to yield any
insights. merge-ort's process_renames() is a bit complex and I would
prefer if I could simplify it more, but it is far easier to grok than
merge-recursive's function of the same name in my opinion. Plus,
merge-ort handles more rename conflict types than merge-recursive does.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Based heavily on merge-recursive's get_diffpairs() function, and also
includes the necessary paired call to diff_warn_rename_limit() so that
users will be warned if merge.renameLimit is not sufficiently large for
rename detection to run.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will grow later, but we only need a few fields for basic rename
handling.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The focus here is on adding a path_msg() which will queue up
warning/conflict/notice messages about the merge for later processing,
storing these in a pathname -> strbuf map. It might seem like a big
change, but it really just is:
* declaration of necessary map with some comments
* initialization and recording of data
* a bunch of code to iterate over the map at print/free time
* at least one caller in order to avoid an error about having an
unused function (which we provide in the form of implementing
modify/delete conflict handling).
At this stage, it is probably not clear why I am opting for delayed
output processing. There are multiple reasons:
1. Merges are supposed to abort if they would overwrite dirty changes
in the working tree. We cannot correctly determine whether changes
would be overwritten until both rename detection has occurred and
full processing of entries with the renames has finalized.
Warning/conflict/notice messages come up at intermediate codepaths
along the way, so unless we want spurious conflict/warning messages
being printed when the merge will be aborted anyway, we need to
save these messages and only print them when relevant.
2. There can be multiple messages for a single path, and we want all
messages for a give path to appear together instead of having them
grouped by conflict/warning type. This was a problem already with
merge-recursive.c but became even more important due to the
splitting apart of conflict types as discussed in the commit
message for 1f3c9ba707 ("t6425: be more flexible with rename/delete
conflict messages", 2020-08-10)
3. Some callers might want to avoid showing the output in certain
cases, such as if the end result is a clean merge. Rebases have
typically done this.
4. Some callers might not want the output to go to stdout or even
stderr, but might want to do something else with it entirely.
For example, a --remerge-diff option to `git show` or `git log
-p` that remerges on the fly and diffs merge commits against the
remerged version would benefit from stdout/stderr not being
written to in the standard form.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplistic and weird-looking patch is here to facilitate future
patch submissions. Adding this stub allows rename detection code to
reference it in one patch series, while a separate patch series can
define the implementation, and then both series can merge cleanly and
work nicely together at that point.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b658536f59 ("merge-ort: add some high-level algorithm structure",
2020-10-27) added high-level structure of the ort merge algorithm. As
we have added more and more functions, that high-level structure has
been slightly obscured. Since functions are still grouped according to
this high-level structure, add comments denoting sections where all the
functions are specifically tied to a piece of the high-level structure.
This function groupings include a few sub-divisions of the original
high-level structure, including some sub-divisions that are yet to be
submitted. Each has (or will have) several functions all serving as
helpers to one or two main functions for each section.
As an added bonus, the comments will serve to provide a small textual
separation between nearby sections and allow the next three patch series
to be submitted independently and merge cleanly.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This field will be used in future patches to allow removal of paths from
opt->priv->paths.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This field is not yet used, but will be used by both the rename handling
code, and the conflict type handling code in process_entry().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move most of merge_finalize() into a new helper function,
clear_internal_opts(). This is a step to facilitate recursive merges,
as well as some future optimizations.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include blob.h for definition of blob_type, and commit-reach.h for
declarations of get_merge_bases() and in_merge_bases(). While none of
these are used yet, we want to avoid cross-dependencies in the next
three series of patches for merge-ort and merge them at the end; adding
these "#include"s now avoids textual conflicts.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After checkout(), the working tree has the appropriate contents, and the
index matches the working copy. That means that all unmodified and
cleanly merged files have correct index entries, but conflicted entries
need to be updated.
We do this by looping over the conflicted entries, marking the existing
index entry for the path with CE_REMOVE, adding new higher order staged
for the path at the end of the index (ignoring normal index sort order),
and then at the end of the loop removing the CE_REMOVED-marked cache
entries and sorting the index.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since merge-ort creates a tree for its output, when there are no
conflicts, updating the working tree and index is as simple as using the
unpack_trees() machinery with a twoway_merge (i.e. doing the equivalent
of a "checkout" operation).
If there were conflicts in the merge, then since the tree we created
included all the conflict markers, then using the unpack_trees machinery
in this manner will still update the working tree correctly. Further,
all index entries corresponding to cleanly merged files will also be
updated correctly by this procedure. Index entries corresponding to
conflicted entries will appear as though the user had run "git add -u"
after the merge to accept all files as-is with conflict markers.
Thus, after running unpack_trees(), there needs to be a separate step
for updating the entries in the index corresponding to conflicted files.
This will be the job for the function record_conflicted_index_entris(),
which will be implemented in a subsequent commit.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a basic implementation for merge_switch_to_result(), though
just in terms of a few new empty functions that will be defined in
subsequent commits.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our order for processing of entries means that if we have a tree of
files that looks like
Makefile
src/moduleA/foo.c
src/moduleA/bar.c
src/moduleB/baz.c
src/moduleB/umm.c
tokens.txt
Then we will process paths in the order of the leftmost column below. I
have added two additional columns that help explain the algorithm that
follows; the 2nd column is there to remind us we have oid & mode info we
are tracking for each of these paths (which differs between the paths
which I'm not representing well here), and the third column annotates
the parent directory of the entry:
tokens.txt <version_info> ""
src/moduleB/umm.c <version_info> src/moduleB
src/moduleB/baz.c <version_info> src/moduleB
src/moduleB <version_info> src
src/moduleA/foo.c <version_info> src/moduleA
src/moduleA/bar.c <version_info> src/moduleA
src/moduleA <version_info> src
src <version_info> ""
Makefile <version_info> ""
When the parent directory changes, if it's a subdirectory of the previous
parent directory (e.g. "" -> src/moduleB) then we can just keep appending.
If the parent directory differs from the previous parent directory and is
not a subdirectory, then we should process that directory.
So, for example, when we get to this point:
tokens.txt <version_info> ""
src/moduleB/umm.c <version_info> src/moduleB
src/moduleB/baz.c <version_info> src/moduleB
and note that the next entry (src/moduleB) has a different parent than
the last one that isn't a subdirectory, we should write out a tree for it
100644 blob <HASH> umm.c
100644 blob <HASH> baz.c
then pop all the entries under that directory while recording the new
hash for that directory, leaving us with
tokens.txt <version_info> ""
src/moduleB <new version_info> src
This process repeats until at the end we get to
tokens.txt <version_info> ""
src <new version_info> ""
Makefile <version_info> ""
and then we can write out the toplevel tree. Since we potentially have
entries in our string_list corresponding to multiple different toplevel
directories, e.g. a slightly different repository might have:
whizbang.txt <version_info> ""
tokens.txt <version_info> ""
src/moduleD <new version_info> src
src/moduleC <new version_info> src
src/moduleB <new version_info> src
src/moduleA/foo.c <version_info> src/moduleA
src/moduleA/bar.c <version_info> src/moduleA
When src/moduleA is popped off, we need to know that the "last
directory" reverts back to src, and how many entries in our string_list
are associated with that parent directory. So I use an auxiliary
offsets string_list which would have (parent_directory,offset)
information of the form
"" 0
src 2
src/moduleA 5
Whenever I write out a tree for a subdirectory, I set versions.nr to
the final offset value and then decrement offsets.nr...and then add
an entry to versions with a hash for the new directory.
The idea is relatively simple, there's just a lot of accounting to
implement this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new function, write_tree(), which will take a list of
basenames, modes, and oids for a single directory and create a tree
object in the object-store. We do not yet have just basenames, modes,
and oids for just a single directory (we have a mixture of entries from
all directory levels in the hierarchy) so we still die() before the
current call to write_tree(), but the next patch will rectify that.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a step towards transforming the processed path->conflict_info entries
into an actual tree object, start recording basenames, modes, and oids
in a dir_metadata structure. Subsequent commits will make use of this
to actually write a tree.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to handle paths below a directory before needing to handle the
directory itself. Also, we want to handle the directory immediately
after the paths below it, so we can't use simple lexicographic ordering
from strcmp (which would insert foo.txt between foo and foo/file.c).
Copy string_list_df_name_compare() from merge-recursive.c, and set up a
string list of paths sorted by that function so that we can iterate in
the desired order.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a process_entries() implementation that just loops over the paths
and processes each one individually with an auxiliary process_entry()
call. Add a basic process_entry() as well, which handles several cases
but leaves a few of the more involved ones with die-not-implemented
messages. Also, although process_entries() is supposed to create a
tree, it does not yet have code to do so -- except in the special case
of merging completely empty trees.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When all three trees have the same oid, there is no need to recurse into
these trees to find that all files within them happen to match. We can
just record any one of the trees as the resolution of merging that
particular path.
Immediately resolving trees for other types of trivial tree merges (such
as one side matches the merge base, or the two sides match each other)
would prevent us from detecting renames for some paths, and thus prevent
us from doing three-way content merges for those paths whose renames we
did not detect.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a helper function, setup_path_info(), which can be used to record
all the information we want in a merged_info or conflict_info. While
there is currently only one caller of this new function, and some of its
particular parameters are fixed, future callers of this function will be
added later.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Three-way merges, by their nature, are going to often have two or more
trees match at a given subdirectory. We can avoid calling
fill_tree_descriptor() on the same tree by checking when these trees
match. Noting when various oids match will also be useful in other
calculations and optimizations as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This does not actually collect any necessary info other than the
pathnames involved, since it just allocates an all-zero conflict_info
and stuffs that into paths. However, it invokes the traverse_trees()
machinery to walk over all the paths and sets up the basic
infrastructure we need.
I have left out a few obvious optimizations to try to make this patch as
short and obvious as possible. A subsequent patch will add some of
those back in with some more useful data fields before we introduce a
patch that actually sets up the conflict_info fields.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various places in merge-recursive used an err() function when it hit
some kind of unrecoverable error. That code was from the reusable bits
of merge-recursive.c that we liked, such as merge_3way, writing object
files to the object store, reading blobs from the object store, etc. So
create a similar function to allow us to port that code over, and use it
for when we detect problems returned from collect_merge_info()'s
traverse_trees() call, which we will be adding next.
While we are at it, also add more documentation for the "clean" field
from struct merge_result, particularly since the name suggests a boolean
but it is not quite one and this is our first non-boolean usage.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In my cursory investigation, histogram diffs are about 2% slower than
Myers diffs. Others have probably done more detailed benchmarks. But,
in short, histogram diffs have been around for years and in a number of
cases provide obviously better looking diffs where Myers diffs are
unintelligible but the performance hit has kept them from becoming the
default.
However, there are real merge bugs we know about that have triggered on
git.git and linux.git, which I don't have a clue how to address without
the additional information that I believe is provided by histogram
diffs. See the following:
https://lore.kernel.org/git/20190816184051.GB13894@sigill.intra.peff.net/https://lore.kernel.org/git/CABPp-BHvJHpSJT7sdFwfNcPn_sOXwJi3=o14qjZS3M8Rzcxe2A@mail.gmail.com/https://lore.kernel.org/git/CABPp-BGtez4qjbtFT1hQoREfcJPmk9MzjhY5eEq1QhXT23tFOw@mail.gmail.com/
I don't like mismerges. I really don't like silent mismerges. While I
am sometimes willing to make performance and correctness tradeoff, I'm
much more interested in correctness in general. I want to fix the above
bugs. I have not yet started doing so, but I believe histogram diff at
least gives me an angle. Unfortunately, I can't rely on using the
information from histogram diff unless it's in use. And it hasn't been
used because of a few percentage performance hit.
In testcases I have looked at, merge-ort is _much_ faster than
merge-recursive for non-trivial merges/rebases/cherry-picks. As such,
this is a golden opportunity to switch out the underlying diff algorithm
(at least the one used by the merge machinery; git-diff and git-log are
separate questions); doing so will allow me to get additional data and
improved diffs, and I believe it will help me fix the above bugs at some
point in the future.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge_start() basically does a bunch of sanity checks, then allocates
and initializes opt->priv -- a struct merge_options_internal.
Most of the sanity checks are usable as-is. The
allocation/intialization is a bit different since merge-ort has a very
different merge_options_internal than merge-recursive, but the idea is
the same.
The weirdest part here is that merge-ort and merge-recursive use the
same struct merge_options, even though merge_options has a number of
fields that are oddly specific to merge-recursive's internal
implementation and don't even make sense with merge-ort's high-level
design (e.g. buffer_output, which merge-ort has to always do). I reused
the same data structure because:
* most the fields made sense to both merge algorithms
* making a new struct would have required making new enums or somehow
externalizing them, and that was getting messy.
* it simplifies converting the existing callers by not having to
have different code paths for merge_options setup.
I also marked detect_renames as ignored. We can revisit that later, but
in short: merge-recursive allowed turning off rename detection because
it was sometimes glacially slow. When you speed something up by a few
orders of magnitude, it's worth revisiting whether that justification is
still relevant. Besides, if folks find it's still too slow, perhaps
they have a better scaling case than I could find and maybe it turns up
some more optimizations we can add. If it still is needed as an option,
it is easy to add later.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge_ort_nonrecursive_internal() will be used by both
merge_inmemory_nonrecursive() and merge_inmemory_recursive(); let's
focus on it for now. It involves some setup -- merge_start() --
followed by the following chain of functions:
collect_merge_info()
This function will populate merge_options_internal's paths field,
via a call to traverse_trees() and a new callback that will be added
later.
detect_and_process_renames()
This function will detect renames, and then adjust entries in paths
to move conflict stages from old pathnames into those for new
pathnames, so that the next step doesn't have to think about renames
and just can do three-way content merging and such.
process_entries()
This function determines how to take the various stages (versions of
a file from the three different sides) and merge them, and whether
to mark the result as conflicted or cleanly merged. It also writes
out these merged file versions as it goes to create a tree.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set up some basic internal data structures. The only carry-over from
merge-recursive.c is call_depth, though needed_rename_limit will be
added later.
The central piece of data will definitely be the strmap "paths", which
will map every relevant pathname under consideration to either a
merged_info or a conflict_info. ("conflicted" is a strmap that is a
subset of "paths".)
merged_info contains all relevant information for a non-conflicted
entry. conflict_info contains a merged_info, plus any additional
information about a conflict such as the higher orders stages involved
and the names of the paths those came from (handy once renames get
involved). If an entry remains conflicted, the merged_info portion of a
conflict_info will later be filled with whatever version of the file
should be placed in the working directory (e.g. an as-merged-as-possible
variation that contains conflict markers).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git rev-parse has several options which print various paths. Some of
these paths are printed relative to the current working directory, and
some are absolute.
Normally, this is not a problem, but there are times when one wants
paths entirely in one format or another. This can be done trivially if
the paths are canonical, but canonicalizing paths is not possible on
some shell scripting environments which lack realpath(1) and also in Go,
which lacks functions that properly canonicalize paths on Windows.
To help out the scripter, let's provide an option which turns most of
the paths printed by git rev-parse to be either relative to the current
working directory or absolute and canonical. Document which options are
affected and which are not so that users are not confused.
This approach is cleaner and tidier than providing duplicates of
existing options which are either relative or absolute.
Note that if the user needs both forms, it is possible to pass an
additional option in the middle of the command line which changes the
behavior of subsequent operations.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, we have a function to resolve paths, strbuf_realpath. This
function canonicalizes paths like realpath(3), but permits a trailing
component to be absent from the file system. In other words, this is
the behavior of the GNU realpath(1) without any arguments.
In the future, we'll need this same behavior, except that we want to
allow for any number of missing trailing components, which is the
behavior of GNU realpath(1) with the -m option. This is useful because
we'll want to canonicalize a path that may point to a not yet present
path under the .git directory. For example, a user may want to know
where an arbitrary ref would be stored if it existed in the file system.
Let's refactor strbuf_realpath to move most of the code to an internal
function and then pass it two flags to control its behavior. We'll add
a strbuf_realpath_forgiving function that has our new behavior, and
leave strbuf_realpath with the older, stricter behavior.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the documentation for the various %(trailers) options so it
isn't repeating part of the documentation for "only" about how boolean
values are handled. Instead, let's split the description of that into
general documentation at the top.
It then suffices to refer to it by listing the options as
"opt[=<BOOL>]". I'm also changing it to upper-case "[=<BOOL>]" from
"[=val]" for consistency with "<SEP>"
It took me a couple of readings to realize that these options were
referring back to the "only" option's treatment of boolean
values.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a "key_value_separator" option to the "%(trailers)" pretty format,
to go along with the existing "separator" argument. In combination
these two options make it trivial to produce machine-readable (e.g. \0
and \0\0-delimited) format output.
As elaborated on in a previous commit which added "keyonly" it was
needlessly tedious to extract structured data from "%(trailers)"
before the addition of this "key_value_separator" option. As seen by
the test being added here extracting this data now becomes trivial.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for a "keyonly". This allows for easier parsing out of the
key and value. Before if you didn't want to make assumptions about how
the key was formatted. You'd need to parse it out as e.g.:
--pretty=format:'%H%x00%(trailers:separator=%x00%x00)' \
'%x00%(trailers:separator=%x00%x00,valueonly)'
And then proceed to deduce keys by looking at those two and
subtracting the value plus the hardcoded ": " separator from the
non-valueonly %(trailers) line. Now it's possible to simply do:
--pretty=format:'%H%x00%(trailers:separator=%x00%x00,keyonly)' \
'%x00%(trailers:separator=%x00%x00,valueonly)'
Which at least reduces it to a state machine where you get N keys and
correlate them with N values. Even better would be to have a way to
change the ": " delimiter to something easily machine-readable (a key
might contain ": " too). A follow-up change will add support for that.
I don't really have a use-case for just "keyonly" myself. I suppose it
would be useful in some cases as "key=*" matches case-insensitively,
so a plain "keyonly" will give you the variants of the keys you
matched. I'm mainly adding it to fix the inconsistency with
"valueonly".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix %(trailers:valueonly) being a noop due to on overly eager
optimization in format_trailer_info() which skips custom formatting if
no custom options are given.
When "valueonly" was added in d9b936db52 (pretty: add support for
"valueonly" option in %(trailers), 2019-01-28) we forgot to add it to
the list of options that optimization checks for. See e.g. the
addition of "key" in 250bea0c16 (pretty: allow showing specific
trailers, 2019-01-28) for a similar change where this wasn't missed.
Thus the "valueonly" option in "%(trailers:valueonly)" was a noop and
the output was equivalent to that of a plain "%(trailers)". This
wasn't caught because the tests for it always combined it with other
options.
Fix the bug by adding !opts->value_only to the list. I initially
attempted to make this more future-proof by setting a flag if we got
to ":" in "%(trailers:" in format_commit_one() in pretty.c. However,
"%(trailers:" is also parsed in trailers_atom_parser() in
ref-filter.c.
There is an outstanding patch[1] unify those two, and such a fix, or
other future-proofing, such as changing "process_trailer_options"
flags into a bitfield, would conflict with that effort. Let's instead
do the bare minimum here as this aspect of trailers is being actively
worked on by another series.
Let's also test for a plain "valueonly" without any other options, as
well as "separator". All the other existing options on the pretty.c
path had tests where they were the only option provided. I'm also
keeping a sanity test for "%(trailers:)" being the same as
"%(trailers)". There's no reason to suspect it wouldn't be in the
current implementation, but let's keep it in the interest of black box
testing.
1. https://lore.kernel.org/git/pull.726.git.1599335291.gitgitgadget@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the old bitmap file contains a bitmap for a given commit, then that
commit does not need help from intermediate commits in its history to
compute its final bitmap. Eject that commit from the walk and insert it
into a separate list of reusable commits that are eventually stored in
the list of commits for computing bitmaps.
This helps the repeat bitmap computation task, even if the selected
commits shift drastically. This helps when a previously-bitmapped commit
exists in the first-parent history of a newly-selected commit. Since we
stop the walk at these commits and we use a first-parent walk, it is
harder to walk "around" these bitmapped commits. It's not impossible,
but we can greatly reduce the computation time for many selected
commits.
| runtime (sec) | peak heap (GB) |
| | |
| from | with | from | with |
| scratch | existing | scratch | existing |
-----------+---------+----------+---------+-----------
last patch | 88.478 | 53.218 | 2.157 | 2.224 |
this patch | 86.681 | 16.164 | 2.157 | 2.222 |
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commits improved the bitmap computation process for very
long, linear histories with many refs by removing quadratic growth in
how many objects were walked. The strategy of computing "intermediate
commits" using bitmasks for which refs can reach those commits
partitioned the poset of reachable objects so each part could be walked
exactly once. This was effective for linear histories.
However, there was a (significant) drawback: wide histories with many
refs had an explosion of memory costs to compute the commit bitmasks
during the exploration that discovers these intermediate commits. Since
these wide histories are unlikely to repeat walking objects, the benefit
of walking objects multiple times was not expensive before. But now, the
commit walk *before computing bitmaps* is incredibly expensive.
In an effort to discover a happy medium, this change reduces the walk
for intermediate commits to only the first-parent history. This focuses
the walk on how the histories converge, which still has significant
reduction in repeat object walks. It is still possible to create
quadratic behavior in this version, but it is probably less likely in
realistic data shapes.
Here is some data taken on a fresh clone of the kernel:
| runtime (sec) | peak heap (GB) |
| | |
| from | with | from | with |
| scratch | existing | scratch | existing |
-----------+---------+----------+---------+-----------
original | 64.044 | 83.241 | 2.088 | 2.194 |
last patch | 45.049 | 37.624 | 2.267 | 2.334 |
this patch | 88.478 | 53.218 | 2.157 | 2.224 |
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When constructing new bitmaps, we perform a commit and tree walk in
fill_bitmap_commit() and fill_bitmap_tree(). This walk would benefit
from using existing bitmaps when available. We must track the existing
bitmaps and translate them into the new object order, but this is
generally faster than parsing trees.
In fill_bitmap_commit(), we must reorder thing somewhat. The priority
queue walks commits from newest-to-oldest, which means we correctly stop
walking when reaching a commit with a bitmap. However, if we walk trees
interleaved with the commits, then we might be parsing trees that are
actually part of a re-used bitmap. To avoid over-walking trees, add them
to a LIFO queue and walk them after exploring commits completely.
On git.git, this reduces a second immediate bitmap computation from 2.0s
to 1.0s. On linux.git, we go from 32s to 22s. On chromium's fork
network, we go from 227s to 198s.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'find_objects()' currently needs to interact with the bitmaps khash
pretty closely. To make 'find_objects()' read a little more
straightforwardly, remove some of the khash-level details into a new
function that describes what it does: 'add_commit_to_bitmap()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of callers within pack-bitmap.c duplicate logic to lookup a
given object id in the bitamps khash. Factor this out into a new
function, 'bitmap_for_commit()' to reduce some code duplication.
Make this new function non-static, since it will be used in later
commits from outside of pack-bitmap.c.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The on-disk bitmap format has a flag to mark a bitmap to be "reused".
This is a rather curious feature, and works like this:
- a run of pack-objects would decide to mark the last 80% of the
bitmaps it generates with the reuse flag
- the next time we generate bitmaps, we'd see those reuse flags from
the last run, and mark those commits as special:
- we'd be more likely to select those commits to get bitmaps in
the new output
- when generating the bitmap for a selected commit, we'd reuse the
old bitmap as-is (rearranging the bits to match the new pack, of
course)
However, neither of these behaviors particularly makes sense.
Just because a commit happened to be bitmapped last time does not make
it a good candidate for having a bitmap this time. In particular, we may
choose bitmaps based on how recent they are in history, or whether a ref
tip points to them, and those things will change. We're better off
re-considering fresh which commits are good candidates.
Reusing the existing bitmap _is_ a reasonable thing to do to save
computation. But only reusing exact bitmaps is a weak form of this. If
we have an old bitmap for A and now want a new bitmap for its child, we
should be able to compute that only by looking at trees and that are new
to the child. But this code would consider only exact reuse (which is
perhaps why it was eager to select those commits in the first place).
Furthermore, the recent switch to the reverse-edge algorithm for
generating bitmaps dropped this optimization entirely (and yet still
performs better).
So let's do a few cleanups:
- drop the whole "reusing bitmaps" phase of generating bitmaps. It's
not helping anything, and is mostly unused code (or worse, code that
is using CPU but not doing anything useful)
- drop the use of the on-disk reuse flag to select commits to bitmap
- stop setting the on-disk reuse flag in bitmaps we generate (since
nothing respects it anymore)
We will keep a few innards of the reuse code, which will help us
implement a more capable version of the "reuse" optimization:
- simplify rebuild_existing_bitmaps() into a function that only builds
the mapping of bits between the old and new orders, but doesn't
actually convert any bitmaps
- make rebuild_bitmap() public; we'll call it lazily to convert bitmaps
as we traverse (using the mapping created above)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bitmap_writer_build() method calls bitmap_builder_init() to
construct a list of commits reachable from the selected commits along
with a "reverse graph". This reverse graph has edges pointing from a
commit to other commits that can reach that commit. After computing a
reachability bitmap for a commit, the values in that bitmap are then
copied to the reachability bitmaps across the edges in the reverse
graph.
We can now relax the role of the reverse graph to greatly reduce the
number of intermediate reachability bitmaps we compute during this
reverse walk. The end result is that we walk objects the same number of
times as before when constructing the reachability bitmaps, but we also
spend much less time copying bits between bitmaps and have much lower
memory pressure in the process.
The core idea is to select a set of "important" commits based on
interactions among the sets of commits reachable from each selected commit.
The first technical concept is to create a new 'commit_mask' member in the
bb_commit struct. Note that the selected commits are provided in an
ordered array. The first thing to do is to mark the ith bit in the
commit_mask for the ith selected commit. As we walk the commit-graph, we
copy the bits in a commit's commit_mask to its parents. At the end of
the walk, the ith bit in the commit_mask for a commit C stores a boolean
representing "The ith selected commit can reach C."
As we walk, we will discover non-selected commits that are important. We
will get into this later, but those important commits must also receive
bit positions, growing the width of the bitmasks as we walk. At the true
end of the walk, the ith bit means "the ith _important_ commit can reach
C."
MAXIMAL COMMITS
---------------
We use a new 'maximal' bit in the bb_commit struct to represent whether
a commit is important or not. The term "maximal" comes from the
partially-ordered set of commits in the commit-graph where C >= P if P
is a parent of C, and then extending the relationship transitively.
Instead of taking the maximal commits across the entire commit-graph, we
instead focus on selecting each commit that is maximal among commits
with the same bits on in their commit_mask. This definition is
important, so let's consider an example.
Suppose we have three selected commits A, B, and C. These are assigned
bitmasks 100, 010, and 001 to start. Each of these can be marked as
maximal immediately because they each will be the uniquely maximal
commit that contains their own bit. Keep in mind that that these commits
may have different bitmasks after the walk; for example, if B can reach
C but A cannot, then the final bitmask for C is 011. Even in these
cases, C would still be a maximal commit among all commits with the
third bit on in their masks.
Now define sets X, Y, and Z to be the sets of commits reachable from A,
B, and C, respectively. The intersections of these sets correspond to
different bitmasks:
* 100: X - (Y union Z)
* 010: Y - (X union Z)
* 001: Z - (X union Y)
* 110: (X intersect Y) - Z
* 101: (X intersect Z) - Y
* 011: (Y intersect Z) - X
* 111: X intersect Y intersect Z
This can be visualized with the following Hasse diagram:
100 010 001
| \ / \ / |
| \/ \/ |
| /\ /\ |
| / \ / \ |
110 101 011
\___ | ___/
\ | /
111
Some of these bitmasks may not be represented, depending on the topology
of the commit-graph. In fact, we are counting on it, since the number of
possible bitmasks is exponential in the number of selected commits, but
is also limited by the total number of commits. In practice, very few
bitmasks are possible because most commits converge on a common "trunk"
in the commit history.
With this three-bit example, we wish to find commits that are maximal
for each bitmask. How can we identify this as we are walking?
As we walk, we visit a commit C. Since we are walking the commits in
topo-order, we know that C is visited after all of its children are
visited. Thus, when we get C from the revision walk we inspect the
'maximal' property of its bb_data and use that to determine if C is truly
important. Its commit_mask is also nearly final. If C is not one of the
originally-selected commits, then assign a bit position to C (by
incrementing num_maximal) and set that bit on in commit_mask. See
"MULTIPLE MAXIMAL COMMITS" below for more detail on this.
Now that the commit C is known to be maximal or not, consider each
parent P of C. Compute two new values:
* c_not_p : true if and only if the commit_mask for C contains a bit
that is not contained in the commit_mask for P.
* p_not_c : true if and only if the commit_mask for P contains a bit
that is not contained in the commit_mask for P.
If c_not_p is false, then P already has all of the bits that C would
provide to its commit_mask. In this case, move on to other parents as C
has nothing to contribute to P's state that was not already provided by
other children of P.
We continue with the case that c_not_p is true. This means there are
bits in C's commit_mask to copy to P's commit_mask, so use bitmap_or()
to add those bits.
If p_not_c is also true, then set the maximal bit for P to one. This means
that if no other commit has P as a parent, then P is definitely maximal.
This is because no child had the same bitmask. It is important to think
about the maximal bit for P at this point as a temporary state: "P is
maximal based on current information."
In contrast, if p_not_c is false, then set the maximal bit for P to
zero. Further, clear all reverse_edges for P since any edges that were
previously assigned to P are no longer important. P will gain all
reverse edges based on C.
The final thing we need to do is to update the reverse edges for P.
These reverse edges respresent "which closest maximal commits
contributed bits to my commit_mask?" Since C contributed bits to P's
commit_mask in this case, C must add to the reverse edges of P.
If C is maximal, then C is a 'closest' maximal commit that contributed
bits to P. Add C to P's reverse_edges list.
Otherwise, C has a list of maximal commits that contributed bits to its
bitmask (and this list is exactly one element). Add all of these items
to P's reverse_edges list. Be careful to ignore duplicates here.
After inspecting all parents P for a commit C, we can clear the
commit_mask for C. This reduces the memory load to be limited to the
"width" of the commit graph.
Consider our ABC/XYZ example from earlier and let's inspect the state of
the commits for an interesting bitmask, say 011. Suppose that D is the
only maximal commit with this bitmask (in the first three bits). All
other commits with bitmask 011 have D as the only entry in their
reverse_edges list. D's reverse_edges list contains B and C.
COMPUTING REACHABILITY BITMAPS
------------------------------
Now that we have our definition, let's zoom out and consider what
happens with our new reverse graph when computing reachability bitmaps.
We walk the reverse graph in reverse-topo-order, so we visit commits
with largest commit_masks first. After we compute the reachability
bitmap for a commit C, we push the bits in that bitmap to each commit D
in the reverse edge list for C. Then, when we finally visit D we already
have the bits for everything reachable from maximal commits that D can
reach and we only need to walk the objects in the set-difference.
In our ABC/XYZ example, when we finally walk for the commit A we only
need to walk commits with bitmask equal to A's bitmask. If that bitmask
is 100, then we are only walking commits in X - (Y union Z) because the
bitmap already contains the bits for objects reachable from (X intersect
Y) union (X intersect Z) (i.e. the bits from the reachability bitmaps
for the maximal commits with bitmasks 110 and 101).
The behavior is intended to walk each commit (and the trees that commit
introduces) at most once while allocating and copying fewer reachability
bitmaps. There is one caveat: what happens when there are multiple
maximal commits with the same bitmask, with respect to the initial set
of selected commits?
MULTIPLE MAXIMAL COMMITS
------------------------
Earlier, we mentioned that when we discover a new maximal commit, we
assign a new bit position to that commit and set that bit position to
one for that commit. This is absolutely important for interesting
commit-graphs such as git/git and torvalds/linux. The reason is due to
the existence of "butterflies" in the commit-graph partial order.
Here is an example of four commits forming a butterfly:
I J
|\ /|
| \/ |
| /\ |
|/ \|
M N
\ /
|/
Q
Here, I and J both have parents M and N. In general, these do not need
to be exact parent relationships, but reachability relationships. The
most important part is that M and N cannot reach each other, so they are
independent in the partial order. If I had commit_mask 10 and J had
commit_mask 01, then M and N would both be assigned commit_mask 11 and
be maximal commits with the bitmask 11. Then, what happens when M and N
can both reach a commit Q? If Q is also assigned the bitmask 11, then it
is not maximal but is reachable from both M and N.
While this is not necessarily a deal-breaker for our abstract definition
of finding maximal commits according to a given bitmask, we have a few
issues that can come up in our larger picture of constructing
reachability bitmaps.
In particular, if we do not also consider Q to be a "maximal" commit,
then we will walk commits reachable from Q twice: once when computing
the reachability bitmap for M and another time when computing the
reachability bitmap for N. This becomes much worse if the topology
continues this pattern with multiple butterflies.
The solution has already been mentioned: each of M and N are assigned
their own bits to the bitmask and hence they become uniquely maximal for
their bitmasks. Finally, Q also becomes maximal and thus we do not need
to walk its commits multiple times. The final bitmasks for these commits
are as follows:
I:10 J:01
|\ /|
| \ _____/ |
| /\____ |
|/ \ |
M:111 N:1101
\ /
Q:1111
Further, Q's reverse edge list is { M, N }, while M and N both have
reverse edge list { I, J }.
PERFORMANCE MEASUREMENTS
------------------------
Now that we've spent a LOT of time on the theory of this algorithm,
let's show that this is actually worth all that effort.
To test the performance, use GIT_TRACE2_PERF=1 when running
'git repack -abd' in a repository with no existing reachability bitmaps.
This avoids any issues with keeping existing bitmaps to skew the
numbers.
Inspect the "building_bitmaps_total" region in the trace2 output to
focus on the portion of work that is affected by this change. Here are
the performance comparisons for a few repositories. The timings are for
the following versions of Git: "multi" is the timing from before any
reverse graph is constructed, where we might perform multiple
traversals. "reverse" is for the previous change where the reverse graph
has every reachable commit. Finally "maximal" is the version introduced
here where the reverse graph only contains the maximal commits.
Repository: git/git
multi: 2.628 sec
reverse: 2.344 sec
maximal: 2.047 sec
Repository: torvalds/linux
multi: 64.7 sec
reverse: 205.3 sec
maximal: 44.7 sec
So in all cases we've not only recovered any time lost to switching to
the reverse-edge algorithm, but we come out ahead of "multi" in all
cases. Likewise, peak heap has gone back to something reasonable:
Repository: torvalds/linux
multi: 2.087 GB
reverse: 3.141 GB
maximal: 2.288 GB
While I do not have access to full fork networks on GitHub, Peff has run
this algorithm on the chromium/chromium fork network and reported a
change from 3 hours to ~233 seconds. That network is particularly
beneficial for this approach because it has a long, linear history along
with many tags. The "multi" approach was obviously quadratic and the new
approach is linear.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before 'load_bitmap_entries_v1()' reads an actual EWAH bitmap, it should
check that it can safely do so by ensuring that there are at least 6
bytes available to be read (four for the commit's index position, and
then two more for the xor offset and flags, respectively).
Likewise, it should check that the commit index it read refers to a
legitimate object in the pack.
The first fix catches a truncation bug that was exposed when testing,
and the second is purely precautionary.
There are some possible future improvements, not pursued here. They are:
- Computing the correct boundary of the bitmap itself in the caller
and ensuring that we don't read past it. This may or may not be
worth it, since in a truncation situation, all bets are off: (is the
trailer still there and the bitmap entries malformed, or is the
trailer truncated?). The best we can do is try to read what's there
as if it's correct data (and protect ourselves when it's obviously
bogus).
- Avoid the magic "6" by teaching read_be32() and read_u8() (both of
which are custom helpers for this function) to check sizes before
advancing the pointers.
- Adding more tests in this area. Testing these truncation situations
are remarkably fragile to even subtle changes in the bitmap
generation. So, the resulting tests are likely to be quite brittle.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bitmap_builder_init() method walks the reachable commits in
topological order and constructs a "reverse graph" along the way. At the
moment, this reverse graph contains an edge from commit A to commit B if
and only if A is a parent of B. Thus, the name "children" is appropriate
for for this reverse graph.
In the next change, we will repurpose the reverse graph to not be
directly-adjacent commits in the commit-graph, but instead a more
abstract relationship. The previous changes have already incorporated
the necessary updates to fill_bitmap_commit() that allow these edges to
not be immediate children.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current rev-list tests that check the bitmap data only work on HEAD
instead of multiple branches. Expand the test cases to handle both
'master' and 'other' branches.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be helpful to check if a commit_list contains a commit. Use
pointer equality, assuming lookup_commit() was used.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bitmap_is_subset() function checks if the 'self' bitmap contains any
bitmaps that are not on in the 'other' bitmap. Up until this patch, it
had a declaration, but no implementation or callers. A subsequent patch
will want this function, so implement it here.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current implementation of bitmap_writer_build() creates a
reachability bitmap for every walked commit. After computing a bitmap
for a commit, those bits are pushed to an in-progress bitmap for its
children.
fill_bitmap_commit() assumes the bits corresponding to objects
reachable from the parents of a commit are already set. This means that
when visiting a new commit, we only have to walk the objects reachable
between it and any of its parents.
A future change to bitmap_writer_build() will relax this condition so
not all parents have their bits set. Prepare for that by having
'fill_bitmap_commit()' walk parents until reaching commits whose bits
are already set. Then, walk the trees for these commits as well.
This has no functional change with the current implementation of
bitmap_writer_build().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our algorithm to generate reachability bitmaps walks through the commit
graph from the bottom up, passing bitmap data from each commit to its
descendants. For a linear stretch of history like:
A -- B -- C
our sequence of steps is:
- compute the bitmap for A by walking its trees, etc
- duplicate A's bitmap as a starting point for B; we can now free A's
bitmap, since we only needed it as an intermediate result
- OR in any extra objects that B can reach into its bitmap
- duplicate B's bitmap as a starting point for C; likewise, free B's
bitmap
- OR in objects for C, and so on...
Rather than duplicating bitmaps and immediately freeing the original, we
can just pass ownership from commit to commit. Note that this doesn't
always work:
- the recipient may be a merge which already has an intermediate
bitmap from its other ancestor. In that case we have to OR our
result into it. Note that the first ancestor to reach the merge does
get to pass ownership, though.
- we may have multiple children; we can only pass ownership to one of
them
However, it happens often enough and copying bitmaps is expensive enough
that this provides a noticeable speedup. On a clone of linux.git, this
reduces the time to generate bitmaps from 205s to 70s. This is about the
same amount of time it took to generate bitmaps using our old "many
traversals" algorithm (the previous commit measures the identical
scenario as taking 63s). It unfortunately provides only a very modest
reduction in the peak memory usage, though.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bitmap generation code works by iterating over the set of commits
for which we plan to write bitmaps, and then for each one performing a
traditional traversal over the reachable commits and trees, filling in
the bitmap. Between two traversals, we can often reuse the previous
bitmap result as long as the first commit is an ancestor of the second.
However, our worst case is that we may end up doing "n" complete
complete traversals to the root in order to create "n" bitmaps.
In a real-world case (the shared-storage repo consisting of all GitHub
forks of chromium/chromium), we perform very poorly: generating bitmaps
takes ~3 hours, whereas we can walk the whole object graph in ~3
minutes.
This commit completely rewrites the algorithm, with the goal of
accessing each object only once. It works roughly like this:
- generate a list of commits in topo-order using a single traversal
- invert the edges of the graph (so have parents point at their
children)
- make one pass in reverse topo-order, generating a bitmap for each
commit and passing the result along to child nodes
We generate correct results because each node we visit has already had
all of its ancestors added to the bitmap. And we make only two linear
passes over the commits.
We also visit each tree usually only once. When filling in a bitmap, we
don't bother to recurse into trees whose bit is already set in the
bitmap (since we know we've already done so when setting their bit).
That means that if commit A references tree T, none of its descendants
will need to open T again. I say "usually", though, because it is
possible for a given tree to be mentioned in unrelated parts of history
(e.g., cherry-picking to a parallel branch).
So we've accomplished our goal, and the resulting algorithm is pretty
simple to understand. But there are some downsides, at least with this
initial implementation:
- we no longer reuse the results of any on-disk bitmaps when
generating. So we'd expect to sometimes be slower than the original
when bitmaps already exist. However, this is something we'll be able
to add back in later.
- we use much more memory. Instead of keeping one bitmap in memory at
a time, we're passing them up through the graph. So our memory use
should scale with the graph width (times the size of a bitmap).
So how does it perform?
For a clone of linux.git, generating bitmaps from scratch with the old
algorithm took 63s. Using this algorithm it takes 205s. Which is much
worse, but _might_ be acceptable if it behaved linearly as the size
grew. It also increases peak heap usage by ~1G. That's not impossibly
large, but not encouraging.
On the complete fork-network of torvalds/linux, it increases the peak
RAM usage by 40GB. Yikes. (I forgot to record the time it took, but the
memory usage was too much to consider this reasonable anyway).
On the complete fork-network of chromium/chromium, I ran out of memory
before succeeding. Some back-of-the-envelope calculations indicate it
would need 80+GB to complete.
So at this stage, we've managed to make things much worse. But because
of the way this new algorithm is structured, there are a lot of
opportunities for optimization on top. We'll start implementing those in
the follow-on patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no easy way to make a copy of a bitmap. Obviously a caller can
iterate over the bits and set them one by one in a new bitmap, but we
can go much faster by copying whole words with memcpy().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a function to bitwise-OR an ewah into an uncompressed bitmap,
but not to OR two uncompressed bitmaps. Let's add it.
Interestingly, we have a public header declaration going back to
e1273106f6 (ewah: compressed bitmap implementation, 2013-11-14), but the
function was never implemented. That was all OK since there were no
users of 'bitmap_or()', but a first caller will be added in a couple of
patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you ask to set a bit in the Nth word and we haven't yet allocated
that many slots in our array, we'll increase the bitmap size to 2*N.
This means we might frequently end up with bitmaps that are twice the
necessary size (as soon as you ask for the biggest bit, we'll size up to
twice that).
But if we just allocate as many words as were asked for, we may not grow
fast enough. The worst case there is setting bit 0, then 1, etc. Each
time we grow we'd just extend by one more word, giving us linear
reallocations (and quadratic memory copies).
A middle ground is relying on alloc_nr(), which causes us to grow by a
factor of roughly 3/2 instead of 2. That's less aggressive than
doubling, and it may help avoid fragmenting memory. (If we start with N,
then grow twice, our total is N*(3/2)^2 = 9N/4. After growing twice,
that array of size 9N/4 can fit into the space vacated by the original
array and first growth, N+3N/2 = 10N/4 > 9N/4, leading to less
fragmentation in memory).
Our worst case is still 3/2N wasted bits (you set bit N-1, then setting
bit N causes us to grow by 3/2), but our average should be much better.
This isn't usually that big a deal, but it will matter as we shift the
reachability bitmap generation code to store more bitmaps in memory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We auto-grow bitmaps when somebody asks to set a bit whose position is
outside of our currently allocated range. Other operations besides
single bit-setting might need to do this, too, so let's pull it into its
own function.
Note that we change the semantics a little: you now ask for the number
of words you'd like to have, not the id of the block you'd like to write
to.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can use "git rev-list --test-bitmap HEAD" to check that bitmaps
produce the same answer we'd get from a regular traversal. But if we
detect an error, we only print "mismatch", and still exit with a
successful error code.
That makes the uses of --test-bitmap in the test suite (e.g., in t5310)
mostly pointless: even if we saw an error, the tests wouldn't notice.
Let's instead call die(), which will let these tests work as designed,
and alert us if the bitmaps are bogus.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We truncate the .bitmap file to 512 bytes and expect to run into
problems reading an individual ewah file. But this length is somewhat
arbitrary, and just happened to work when the test was added in
9d2e330b17 (ewah_read_mmap: bounds-check mmap reads, 2018-06-14).
An upcoming commit will change the size of the history we create in the
test repo, which will cause this test to fail. We can future-proof it a
bit more by reducing the size of the truncated bitmap file.
Signed-off-by: Jeff King <peff@peff.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A .bitmap file may have a "name hash cache" extension, which puts a
sequence of uint32_t values (one per object) at the end of the file.
When we see a flag indicating this extension, we blindly subtract the
appropriate number of bytes from our available length. However, if the
.bitmap file is too short, we'll underflow our length variable and wrap
around, thinking we have a very large length. This can lead to reading
out-of-bounds bytes while loading individual ewah bitmaps.
We can fix this by checking the number of available bytes when we parse
the header. The existing "truncated bitmap" test is now split into two
tests: one where we don't have this extension at all (and hence actually
do try to read a truncated ewah bitmap) and one where we realize
up-front that we can't even fit in the cache structure. We'll check
stderr in each case to make sure we hit the error we're expecting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we parse a .bitmap header, we first check that we have enough bytes
to make a valid header. We do that based on sizeof(struct
bitmap_disk_header). However, as of 0f4d6cada8 (pack-bitmap: make bitmap
header handling hash agnostic, 2019-02-19), that struct oversizes its
checksum member to GIT_MAX_RAWSZ. That means we need to adjust for the
difference between that constant and the size of the actual hash we're
using. That commit adjusted the code which moves our pointer forward,
but forgot to update the size check.
This meant we were overly strict about the header size (requiring room
for a 32-byte worst-case hash, when sha1 is only 20 bytes). But in
practice it didn't matter because bitmap files tend to have at least 12
bytes of actual data anyway, so it was unlikely for a valid file to be
caught by this.
Let's fix it by pulling the header size into a separate variable and
using it in both spots. That fixes the bug and simplifies the code to make
it harder to have a mismatch like this in the future. It will also come
in handy in the next patch for more bounds checking.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'ewah/ewah_bitmap.c:buffer_grow()' is responsible for growing the buffer
used to store the bits of an EWAH bitmap. It is essentially doing the
same task as the 'ALLOC_GROW()' macro, so use that instead.
This simplifies the callers of 'buffer_grow()', who no longer have to
ask for a specific size, but rather specify how much of the buffer they
need. They also no longer need to guard 'buffer_grow()' behind an if
statement, since 'ALLOC_GROW()' (and, by extension, 'buffer_grow()') is
a noop if the buffer is already large enough.
But, the most significant change is that this fixes a bug when calling
buffer_grow() with both 'alloc_size' and 'new_size' set to 1. In this
case, truncating integer math will leave the new size set to 1, causing
the buffer to never grow.
Instead, let alloc_nr() handle this, which asks for '(new_size + 16) * 3
/ 2' instead of 'new_size * 3 / 2'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git diff reports a submodule directory as -dirty even when there are
only untracked files in the submodule directory. This is inconsistent
with what `git describe --dirty` says when run in the submodule
directory in that state.
Make `--ignore-submodules=untracked` the default for `git diff` when
there is no configuration variable or command line option, so that the
command would not give '-dirty' suffix to a submodule whose working
tree has untracked files, to make it consistent with `git
describe --dirty` that is run in the submodule working tree.
And also make `--ignore-submodules=none` the default for `git status`
so that the user doesn't end up deleting a submodule that has
uncommitted (untracked) files.
Signed-off-by: Sangeeta Jain <sangunb09@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split a very long line in a test introduced in 0b691d8685 (pretty:
add support for separator option in %(trailers), 2019-01-28). This
makes it easier to read, especially as follow-up commits will copy
this test as a template.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Advanced and expert users may want to know how 'git maintenance start'
schedules background maintenance in order to customize their own
schedules beyond what the maintenance.* config values allow. Start a new
set of sections in git-maintenance.txt that describe how 'cron' is used
to run these tasks.
This is particularly valuable for users who want to inspect what Git is
doing or for users who want to customize the schedule further. Having a
baseline can provide a way forward for users who have never worked with
cron schedules.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing schedule mechanism using 'cron' is supported by POSIX
platforms, but not Windows. It also works slightly differently on
macOS to significant detriment of the user experience. To allow for
new implementations on these platforms, extract a method that
performs the platform-specific scheduling mechanism. This will be
swapped at compile time with new implementations on specialized
platforms.
As we add this generality, rename GIT_TEST_CRONTAB to
GIT_TEST_MAINT_SCHEDULER. Further, this variable is now parsed as
"<scheduler>:<command>" so we can test platform-specific scheduling
logic even when not on the correct platform. By specifying the
<scheduler> in this string, we will be able to test all three sets of
Git logic from a Linux machine.
Co-authored-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We introduced the `PREPARE_FOR_MAIN_BRANCH` prereq for the sole purpose
of allowing us to perform the non-trivial adjustments regarding the
`master` -> `main` rename before the automatable ones.
Now that the transition is almost complete, we can stop using it in most
instances. The only two exceptions are t5526 and t9902: at the time of
writing, there are other patches in flight that touch these test
scripts, therefore their transition to `main` is postponed to a later
date.
This patch is the result of this command:
sed -i 's/PREPARE_FOR_MAIN_BRANCH[ ,]//' t/t[0-9]*.sh &&
git checkout HEAD -- t/t5526\* t/t9902\*
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carefully excluding t9902, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t9903. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t99*.sh lib-cvs.sh &&
git checkout HEAD -- t9902\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for all tests (except the ones we specifically excluded for now).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commits, we adjusted the test suite to use the branch
name `main` for initial branches.
The `git p4`-related tests are a bit harder to adjust because `git p4`
uses the ref `refs/heads/p4/master` to track the remote branches, and
for now, we do not want to change that (this might be the subject of a
future patch series). We only need to adjust for the actual initial
branch name to be changed to `main`.
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t9[5-7]*.sh lib-cvs.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t9[0-4]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t8*.sh annotate*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Excluding t7817, which is added in an unrelated patch series at the time
of writing, this adjusts t7[5-9]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t7[5-9]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carefully excluding t7064, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t7[0-4]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t7[0-4]*.sh &&
git checkout HEAD -- t7064\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t6[4-9]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are in the process of renaming the default branch name to `main`,
which is two characters shorter than `master`. Therefore, some lines
need to be adjusted in t6416, t6422 and t6427 that want to align text
involving the default branch name.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carefully excluding t6300, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t6[0-3]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t6[0-3]*.sh &&
git checkout HEAD -- t6300\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t5[6-9]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -e 's/retsam/niam/g' \
-- t55[4-9]*.sh t556x*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Note that t5541 uses the reversed `master` name: `retsam`. We replace it
by the equivalent for `main`: `niam`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carefully excluding t5526, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t55[23]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -e 's/naster/nain/g' -- \
t55[23]*.sh &&
git checkout HEAD -- t5526\*)
Note that t5533 contains a variation of the name `master` (`naster`)
that we rename here, too.
This commit allows us to define
`GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for that range of tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t551*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t550*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an upcoming commit, we will use `main` as the default branch name in
t5503 instead of `master`. This will require extra padding in ASCII-art
commit graphs, which we hereby add preemptively.
By doing this preemptively rather than after the commit applying the
search-and-replace, it is more obvious that we caught all aligned
comments that are affected by the latter commit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carefully excluding t5310, which is developed independently of the
current patch series at the time of writing, we now use `main` as
default branch in t5[0-4]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t5[0-4]*.sh &&
git checkout HEAD -- t5310\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are about to search-and-replace all mentions of `master` in t5323 by
`main`, which is two characters shorter. To prepare for that, let's add
padding to centered lines that will make them briefly uncentered, but
will be re-centered in the commit that performs that rename.
Doing it this way (instead of padding after replacing) makes it easier
to verify the validity of the patch that replaces `master` by `main`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carefully excluding t4013 and t4015, which see independent development
elsewhere at the time of writing, we use `main` as the default branch
name in t4*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t4*.sh t4211/*.export &&
git checkout HEAD -- t4013\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t3[5-9]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carefully excluding t3404, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t34*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t34*.sh &&
git checkout HEAD -- t34\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are about to adjust t3416 for the new default branch name `main`.
This name is two characters shorter and therefore needs two spaces more
padding to align correctly.
Adjusting the alignment before the big search-and-replace makes it
easier to verify that the final result does not leave any misaligned
lines behind.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carefully excluding t3040, which sees independent development elsewhere
at the time of writing, we transition above-mentioned tests to the
default branch name `main`. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t3[0-3]*.sh t3206/* &&
git checkout HEAD -- t3040\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carefully excluding t2106, which sees independent development elsewhere
at the time of writing, we transition above-mentioned tests to the
default branch name `main`. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t2*.sh &&
git checkout HEAD -- t2106\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carefully excluding t1309, which sees independent development elsewhere
at the time of writing, we transition above-mentioned tests to the
default branch name `main`. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -e 's/naster/nain/g' -- t[01]*.sh &&
git checkout HEAD -- t1309\*)
Note that t5533 contains a variation of the name `master` (`naster`)
that we rename here, too.
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are about to adjust t0060 for the new default branch name `main`.
This name is two characters shorter and therefore needs two spaces more
padding to align correctly.
Adjusting the alignment before the big search-and-replace makes it
easier to verify that the final result does not leave any misaligned
lines behind.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* en/strmap:
shortlog: use strset from strmap.h
Use new HASHMAP_INIT macro to simplify hashmap initialization
strmap: take advantage of FLEXPTR_ALLOC_STR when relevant
strmap: enable allocations to come from a mem_pool
strmap: add a strset sub-type
strmap: split create_entry() out of strmap_put()
strmap: add functions facilitating use as a string->int map
strmap: enable faster clearing and reusing of strmaps
strmap: add more utility functions
strmap: new utility functions
hashmap: provide deallocation function names
hashmap: introduce a new hashmap_partial_clear()
hashmap: allow re-use after hashmap_free()
hashmap: adjust spacing to fix argument alignment
hashmap: add usage documentation explaining hashmap_free[_entries]()
2020-11-11 12:56:29 -08:00
1063 changed files with 146299 additions and 79374 deletions
report("section '$line' incorrectly ordered, comes after '$actual_last'");
}
next;
}
if ($last_was_section) {
my $last_section = $actual_order[-1];
if (length $last_section ne length $line) {
report("dashes under '$last_section' should match its length!");
}
if ($line !~ /^-+$/) {
report("dashes under '$last_section' should be '-' dashes!");
}
$last_was_section = 0;
}
if (eof) {
# We have both a hash and an array to consider, for
# convenience
my %actual_sections;
@actual_sections{@actual_order} = ();
for my $section (sort keys %SECTIONS) {
next if !$SECTIONS{$section}->{required} or exists $actual_sections{$section};
report("has no required '$section' section!");
}
# Reset per-file state
{
@actual_order = ();
# this resets our $. for each file
close ARGV;
}
}
}
exit $exit_code;
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
