The "FUNNYNAMES" test prerequisite passes on Cygwin, as the Cygwin
file system interface has a workaround for the underlying operating
system's lack of support for tabs, newlines or quotes. However, it does
not add support for backslash, which is treated as a directory
separator, meaning one of the tests added by 48803821b1 ("completion:
handle unusual characters for sparse-checkout", 2022-02-07) will fail on
Cygwin.
To avoid this failure while still getting maximal test coverage, split
that test into two: test handling of paths that include tabs on anything
that has the FUNNYNAMES prerequisite, but skip testing handling of paths
that include backslashes unless both FUNNYNAMES is set and the system is
not Cygwin.
It might be nice to have more granularity than "FUNNYNAMES" and its
sibling "FUNNIERNAMES" provide, so that tests could be run based on
specific individual characters supported by the file system being
tested, but that seems like it would make the prerequisite checks in
this area much more verbose for very little gain.
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ls-tree documentation had never been updated after it learned to
interact with submodules to explicitly mention them. The initial
support was added in f35a6d3bce (Teach core object handling functions
about gitlinks, 2007-04-09). E.g. the discussion of --long added in
f35a6d3bce (Teach core object handling functions about gitlinks,
2007-04-09) didn't explicitly mention them.
But this documentation added in 455923e0a1 (ls-tree: introduce
"--format" option, 2022-03-23) had no such excuse, and was actively
misleading by providing an exhaustive but incomplete list of object
types we'd emit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
440c705ea6 (cat-file: add --batch-command mode, 2022-02-18) added
the new option and operating mode without listing it to the synopsis
section. Fix it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 455923e0a1 ("ls-tree: introduce "--format" option", 2022-03-23)
introduced `--format` and the various placeholders it can take, such as
%(objectname) and %(objectsize).
At some point when that patch was being developed, those placeholders
had shorter names, e.g., %(name) and %(size), which can be seen in the
commit message of 455923e0a1. One instance of "%(size:padded)" also
managed to enter the documentation in the final version of the patch.
Correct it to "%(objectsize:padded)".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The missing space at the end of the line makes the closing square
bracket sticking to the dash in the next line
Found during localisation v2.36.0 round 1
Signed-off-by: Fangyi Zhou <me@fangyi.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoc renders `--` as em-dash. This is not appropriate for command
names. It also breaks linkgit links to these commands.
Fix git-credential-cache--daemon and git-fsmonitor--daemon. The latter
was added 3248486920 (fsmonitor: document builtin fsmonitor, 2022-03-25)
and included several links. A check for broken links in the HTML docs
turned this up.
Manually inspecting the other Documentation/git-*--*.txt files turned up
the issue in git-credential-cache--daemon.
While here, quote `git credential-cache--daemon` in the synopsis to
match the vast majority of our other documentation.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git ls-tree" learns "--oid-only" option, similar to "--name-only",
and more generalized "--format" option.
source: <cover.1648026472.git.dyroneteng@gmail.com>
* tl/ls-tree-oid-only:
ls-tree: `-l` should not imply recursive listing
Add extra ':' to second 'all' target definition to allow 'scalar' to build.
Without this fix, the 'all:' and 'all::' targets together cause a build
failure when 'scalar' build is enabled with 'INCLUDE_SCALAR':
Makefile:14: *** target file `all' has both : and :: entries. Stop.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in my dad9cd7d51 (Makefile: move ".SUFFIXES" rule to
shared.mak, 2022-03-03). As explained in the GNU make documentation
for the $* variable, available at:
info make --index-search='$*'
This rule relied on ".texi" being in the default list of suffixes, as
seen at:
make -f/dev/null -p | grep -v -e ^# -e ^$|grep -F .SUFFIXES
The documentation explains what was going on here:
In an explicit rule, there is no stem; so '$*' cannot be determined
in that way. Instead, if the target name ends with a recognized
suffix (*note Old-Fashioned Suffix Rules: Suffix Rules.), '$*' is
set to the target name minus the suffix. For example, if the
target name is 'foo.c', then '$*' is set to 'foo', since '.c' is a
suffix. GNU 'make' does this bizarre thing only for compatibility
with other implementations of 'make'. You should generally avoid
using '$*' except in implicit rules or static pattern rules.
If the target name in an explicit rule does not end with a
recognized suffix, '$*' is set to the empty string for that rule.
I.e. this rule added back in 5cefc33bff (Documentation: add
gitman.info target, 2007-12-10) was resolving gitman.texi from
gitman.info. We can instead just use the more obvious $< variable
referring to the prerequisite.
This was the only use of $* in our Makefiles in an explicit rule, the
three remaining ones are all implicit rules, and therefore didn't
depend on the ".SUFFIXES" list.
Reported-by: Adam Dinwoodie <adam@dinwoodie.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Tested-by: Adam Dinwoodie <adam@dinwoodie.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If sync_file_range is not available when building the configure script,
there is a cosmetic bug when running that script reporting
"HAVE_SYNC_FILE_RANGE: command not found". Remove that error message by
defining HAVE_SYNC_FILE_RANGE to an empty string, rather than generating
a script where that appears as a bare command.
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
05cd988dce (wrapper: add a helper to generate numbers from a CSPRNG,
2022-01-17), configure openssl as the source for entropy in NON-STOP
but doesn't add the needed header or link options.
Since the only system that is configured to use openssl as a source
of entropy is NON-STOP, add the header unconditionally, and -lcrypto
to the list of external libraries.
An additional change is required to make sure a NO_OPENSSL=1 build
will be able to work as well (tested on Linux with a modified value
of CSPRNG_METHOD = openssl), and the more complex logic that allows
for compatibility with APPLE_COMMON_CRYPTO or allowing for simpler
ways to link (without libssl) has been punted for now.
Reported-by: Randall Becker <rsbecker@nexbridge.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 9c4d58ff2c (ls-tree: split up "fast path" callbacks, 2022-03-23), a
refactoring of the various read_tree_at() callbacks caused us to
unconditionally recurse into directories if `-l` (long format) was
passed on the command line, regardless of whether or not we also pass
the `-r` (recursive) flag.
Fix this by making show_tree_long() return the value of `recurse`,
rather than always returning 1. This value is interpreted by
read_tree_at() to be a signal on whether or not to recurse.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree list --porcelain" did not c-quote pathnames and lock
reasons with unsafe bytes correctly, which is worked around by
introducing NUL terminated output format with "-z".
* pw/worktree-list-with-z:
worktree: add -z option for list subcommand
Built-in fsmonitor (part 2).
* jh/builtin-fsmonitor-part2: (30 commits)
t7527: test status with untracked-cache and fsmonitor--daemon
fsmonitor: force update index after large responses
fsmonitor--daemon: use a cookie file to sync with file system
fsmonitor--daemon: periodically truncate list of modified files
t/perf/p7519: add fsmonitor--daemon test cases
t/perf/p7519: speed up test on Windows
t/perf/p7519: fix coding style
t/helper/test-chmtime: skip directories on Windows
t/perf: avoid copying builtin fsmonitor files into test repo
t7527: create test for fsmonitor--daemon
t/helper/fsmonitor-client: create IPC client to talk to FSMonitor Daemon
help: include fsmonitor--daemon feature flag in version info
fsmonitor--daemon: implement handle_client callback
compat/fsmonitor/fsm-listen-darwin: implement FSEvent listener on MacOS
compat/fsmonitor/fsm-listen-darwin: add MacOS header files for FSEvent
compat/fsmonitor/fsm-listen-win32: implement FSMonitor backend on Windows
fsmonitor--daemon: create token-based changed path cache
fsmonitor--daemon: define token-ids
fsmonitor--daemon: add pathname classification
fsmonitor--daemon: implement 'start' command
...
Give hint when branch tracking cannot be established because fetch
refspecs from multiple remote repositories overlap.
* tk/ambiguous-fetch-refspec:
tracking branches: add advice to ambiguous refspec error
"git fetch --refetch" learned to fetch everything without telling
the other side what we already have, which is useful when you
cannot trust what you have in the local object store.
* rc/fetch-refetch:
docs: mention --refetch fetch option
fetch: after refetch, encourage auto gc repacking
t5615-partial-clone: add test for fetch --refetch
fetch: add --refetch option
builtin/fetch-pack: add --refetch option
fetch-pack: add refetch
fetch-negotiator: add specific noop initializer
"git am" can read from the standard input when no mailbox is given
on the command line, but the end-user gets no indication when it
happens, making Git appear stuck.
* jc/mailsplit-warn-on-tty:
am/apply: warn if we end up reading patches from terminal
A handful of obvious clean-ups around a topic that is already in
'master'.
* gc/branch-recurse-submodules-fix:
branch.c: simplify advice-and-die sequence
branch: rework comments for future developers
branch: remove negative exit code
branch --set-upstream-to: be consistent when advising
branch: give submodule updating advice before exit
branch: support more tracking modes when recursing
When creating a loose object file, we didn't report the exact
filename of the file we failed to fsync, even though the
information was readily available, which has been corrected.
* ns/fsync-or-die-message-fix:
object-file: pass filename to fsync_or_die
A couple of fix-up to a topic that is now in 'master'.
* ns/core-fsyncmethod:
core.fsyncmethod: correctly camel-case warning message
core.fsync: fix incorrect expression for default configuration
Work around AIX C compiler that does not seem to grok
initialization of a union member of a struct.
* ab/reftable-aix-xlc-12:
reftable: make assignments portable to AIX xlc v12.01
Move more "git submodule update" to C.
* gc/submodule-update-part2:
submodule--helper: remove forward declaration
submodule: move core cmd_update() logic to C
submodule--helper: reduce logic in run_update_procedure()
submodule--helper: teach update_data more options
builtin/submodule--helper.c: rename option struct to "opt"
submodule update: use die_message()
submodule--helper: run update using child process struct
Code clean-up.
* ds/partial-bundle-more:
pack-objects: lazily set up "struct rev_info", don't leak
bundle: output hash information in 'verify'
bundle: move capabilities to end of 'verify'
pack-objects: parse --filter directly into revs.filter
pack-objects: move revs out of get_object_list()
list-objects-filter: remove CL_ARG__FILTER
"git ls-tree" learns "--oid-only" option, similar to "--name-only",
and more generalized "--format" option.
* tl/ls-tree-oid-only:
ls-tree: split up "fast path" callbacks
ls-tree: detect and error on --name-only --name-status
ls-tree: support --object-only option for "git-ls-tree"
ls-tree: introduce "--format" option
cocci: allow padding with `strbuf_addf()`
ls-tree: introduce struct "show_tree_data"
ls-tree: slightly refactor `show_tree()`
ls-tree: fix "--name-only" and "--long" combined use bug
ls-tree: simplify nesting if/else logic in "show_tree()"
ls-tree: rename "retval" to "recurse" in "show_tree()"
ls-tree: use "size_t", not "int" for "struct strbuf"'s "len"
ls-tree: use "enum object_type", not {blob,tree,commit}_type
ls-tree: add missing braces to "else" arms
ls-tree: remove commented-out code
ls-tree tests: add tests for --name-status
"git reflog" command now uses parse-options API to parse its
command line options.
* ab/reflog-parse-options:
reflog: fix 'show' subcommand's argv
reflog [show]: display sensible -h output
reflog: convert to parse_options() API
reflog exists: use parse_options() API
git reflog [expire|delete]: make -h output consistent with SYNOPSIS
reflog: move "usage" variables and use macros
reflog tests: add missing "git reflog exists" tests
reflog: refactor cmd_reflog() to "if" branches
reflog.c: indent argument lists
The error "not tracking: ambiguous information for ref" is raised
when we are evaluating what tracking information to set on a branch,
and find that the ref to be added as tracking branch is mapped
under multiple remotes' fetch refspecs.
This can easily happen when a user copy-pastes a remote definition
in their git config, and forgets to change the tracking path.
Add advice in this situation, explicitly highlighting which remotes
are involved and suggesting how to correct the situation. Also
update a test to explicitly expect that advice.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the dwim_branch_start(), when we cannot find an appropriate
upstream, we will die with the same message anyway, whether we
issue an advice message.
Flip the code around a bit and simplify the flow using
advise_if_enabled() function.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For two cases in which we do not explicitly pass --track=<choice>
option down to the submodule--helper subprocess, we have comments
that say "we do not have to pass --track", but in fact we not just
do not have to, but it would be incorrect to pass any --track option
to the subprocess (instead, the correct behaviour is to let the
subprocess figure out what is the appropriate tracking mode to use).
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/usage-die-message:
config API: use get_error_routine(), not vreportf()
usage.c + gc: add and use a die_message_errno()
gc: return from cmd_gc(), don't call exit()
usage.c API users: use die_message() for error() + exit 128
usage.c API users: use die_message() for "fatal :" + exit 128
usage.c: add a die_message() routine
Add a -z option to be used in conjunction with --porcelain that gives
NUL-terminated output. As 'worktree list --porcelain' does not quote
worktree paths this enables it to handle worktree paths that contain
newlines.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We raised the weather balloon to see if we can allow the construct
in 44ba10d6 (revision: use C99 declaration of variable in for()
loop, 2021-11-14), which was shipped as a part of Git v2.35.
Document that fact in the coding guidelines, and more importantly,
give ourselves a deadline to revisit and update.
Let's declare that we will officially adopt the variable declaration
in the initializaiton part of "for ()" statement this winter, unless
we find that a platform we care about does not grok it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update tests around the use of hook scripts.
* ab/hook-tests-updates:
http tests: use "test_hook" for "smart" and "dumb" http tests
proc-receive hook tests: use "test_hook" instead of "write_script"
tests: extend "test_hook" for "rm" and "chmod -x", convert "$HOOK"
tests: use "test_hook" for misc "mkdir -p" and "chmod" cases
tests: change "mkdir -p && write_script" to use "test_hook"
tests: change "cat && chmod +x" to use "test_hook"
gc + p4 tests: use "test_hook", remove sub-shells
fetch+push tests: use "test_hook" and "test_when_finished" pattern
bugreport tests: tighten up "git bugreport -s hooks" test
tests: assume the hooks are disabled by default
http tests: don't rely on "hook/post-update.sample"
hook tests: turn exit code assertions into a loop
test-lib-functions: add and use a "test_hook" wrapper
Tweaks in the command line prompt (in contrib/) code around its
GIT_PS1_SHOWUPSTREAM feature.
* jd/prompt-upstream-mark:
git-prompt: put upstream comments together
git-prompt: make long upstream state indicator consistent
git-prompt: make upstream state indicator location consistent
git-prompt: rename `upstream` to `upstream_type`
Finishing touches to C rewrite of "git add -i" in single-key
interactive mode.
* pw/add-p-single-key:
terminal: restore settings on SIGTSTP
terminal: work around macos poll() bug
terminal: don't assume stdin is /dev/tty
terminal: use flags for save_term()
"git stash" does not allow subcommands it internally runs as its
implementation detail, except for "git reset", to emit messages;
now "git reset" part has also been squelched.
* vd/stash-silence-reset:
reset: show --no-refresh in the short-help
reset: remove 'reset.refresh' config option
reset: remove 'reset.quiet' config option
reset: do not make '--quiet' disable index refresh
stash: make internal resets quiet and refresh index
reset: suppress '--no-refresh' advice if logging is silenced
reset: replace '--quiet' with '--no-refresh' in performance advice
reset: introduce --[no-]refresh option to --mixed
reset: revise index refresh advice
Replace an instance of "exit(-1)" with "exit(1)". We don't use negative
exit codes - they are misleading because Unix machines will coerce them
to 8-bit unsigned values, losing the sign.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we die while trying to fsync a loose object file, pass the actual
filename we're trying to sync. This is likely to be more helpful for a
user trying to diagnose the cause of the failure than the former
'loose object file' string. It also sidesteps any concerns about
translating the die message differently for loose objects versus
something else that has a real path.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch --set-upstream-to" behaves differently when advice is
enabled/disabled:
| | error prefix | exit code |
|-----------------+--------------+-----------|
| advice enabled | error: | 1 |
| advice disabled | fatal: | 128 |
Make both cases consistent by using die_message() when advice is
enabled (this was first proposed in [1]).
[1] https://lore.kernel.org/git/211210.86ee6ldwlc.gmgdl@evledraar.gmail.com
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug where "hint:" was printed _before_ "fatal:" (instead of the
other way around).
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch --recurse-submodules" does not propagate "--track=inherit"
or "--no-track" to submodules, which causes submodule branches to use
the wrong tracking mode [1]. To fix this, pass the correct options to
the "submodule--helper create-branch" child process and test for it.
While we are refactoring the same code, replace "--track" with the
synonymous, but more consistent-looking "--track=direct" option
(introduced at the same time as "--track=inherit", d3115660b4 (branch:
add flags and config to inherit tracking, 2021-12-20)).
[1] This bug is partially a timing issue: "branch --recurse-submodules"
was introduced around the same time as "--track=inherit", and even
though I rebased "branch --recurse-submodules" on top of that, I had
neglected to support the new tracking mode. Omitting "--no-track"
was just a plain old mistake, though.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some global trace2 statistics for the number of fsyncs performed
during the lifetime of a Git process.
These stats are printed as part of trace2_cmd_exit_fl, which is
presumably where we might want to print any other cross-cutting
statistics.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b9f5d035 (core.fsync: documentation and user-friendly
aggregate options, 2022-03-15) introduced an incorrect value for
FSYNC_COMPONENTS_DEFAULT. We need an AND-NOT rather than OR-NOT.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase $base $non_branch_commit", when $base is an ancestor or
the $non_branch_commit, modified the current branch, which has been
corrected.
* jc/rebase-detach-fix:
rebase: set REF_HEAD_DETACH in checkout_up_to_date()
rebase: use test_commit helper in setup
When "shallow" information is updated, we forgot to update the
in-core equivalent, which has been corrected.
* jt/reset-grafts-when-resetting-shallow:
shallow: reset commit grafts when shallow is reset
Correct a bug in unpack-trees introduced earlier.
* vd/cache-bottom-fix:
Revert "unpack-trees: improve performance of next_cache_entry"
unpack-trees: increment cache_bottom for sparse directories
t1092: add sparse directory before cone in test repo
Code clean-up.
* ab/refs-various-fixes:
refs debug: add a wrapper for "read_symbolic_ref"
packed-backend: remove stub BUG(...) functions
misc *.c: use designated initializers for struct assignments
refs: use designated initializers for "struct ref_iterator_vtable"
refs: use designated initializers for "struct ref_storage_be"
The worktree repair command was not added to the usage menu for the
worktree command. This commit adds the usage of 'worktree repair'
according to the existing docs.
Signed-off-by: Des Preston <despreston@gmail.com>
Acked-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the stat info of the moved index entry in 'rename_index_entry_at()'
if the entry is up-to-date with the index. Internally, 'git mv' uses
'rename_index_entry_at()' to move the source index entry to the destination.
However, it directly copies the stat info of the original cache entry, which
will not reflect the 'ctime' of the file renaming operation that happened as
part of the move. If a file is otherwise up-to-date with the index, that
difference in 'ctime' will make the entry appear out-of-date until the next
index-refreshing operation (e.g., 'git status').
Some commands, such as 'git reset', use the cached stat information to
determine whether a file is up-to-date; if this information is incorrect,
the command will fail when it should pass. In order to ensure a moved entry
is evaluated as 'up-to-date' when appropriate, refresh the destination index
entry's stat info in 'git mv' if and only if the file is up-to-date.
Note that the test added in 't7001-mv.sh' requires a "sleep 1" to ensure the
'ctime' of the file creation will be definitively older than the 'ctime' of
the renamed file in 'git mv'.
Reported-by: Maximilian Reichel <reichemn@icloud.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_reflog() invokes parse_options() with PARSE_OPT_KEEP_ARGV0, but it
doesn't account for the retained argv[0] before invoking
cmd_reflog_show() to handle the 'git reflog show' subcommand.
Consequently, cmd_reflog_show() always gets an 'argv' array starting
with elements argv[0]="reflog" and argv[1]="show".
Strip the name of the git command from the 'argv' array before passing
it to the function handling the 'show' subcommand.
There is no user-visible bug here, because cmd_reflog_show() doesn't
have any options or parameters of its own.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the assignment syntax introduced in 66c0dabab5 (reftable: make
reftable_record a tagged union, 2022-01-20) to be portable to AIX xlc
v12.1:
avar@gcc111:[/home/avar]xlc -qversion
IBM XL C/C++ for AIX, V12.1 (5765-J02, 5725-C72)
Version: 12.01.0000.0000
The error emitted before this was e.g.:
"reftable/generic.c", line 133.26: 1506-196 (S) Initialization
between types "char*" and "struct reftable_ref_record" is not
allowed.
The syntax in the pre-image is supported by e.g. xlc 13.01 on a newer
AIX version:
avar@gcc119:[/home/avar]xlc -qversion
IBM XL C/C++ for AIX, V13.1.3 (5725-C72, 5765-J07)
Version: 13.01.0003.0006
But as we've otherwise supported this compiler let's not break it
entirely if it's easy to work around it.
Suggested-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document it for partial clones as a means to apply a new filter, and
reference it from the remote.<name>.partialclonefilter config parameter.
Signed-off-by: Robert Coup <robert@coup.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After invoking `fetch --refetch`, the object db will likely contain many
duplicate objects. If auto-maintenance is enabled, invoke it with
appropriate settings to encourage repacking/consolidation.
* gc.autoPackLimit: unless this is set to 0 (disabled), override the
value to 1 to force pack consolidation.
* maintenance.incremental-repack.auto: unless this is set to 0, override
the value to -1 to force incremental repacking.
Signed-off-by: Robert Coup <robert@coup.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test for doing a refetch to apply a changed partial clone filter
under protocol v0 and v2.
Signed-off-by: Robert Coup <robert@coup.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fetch and transports the --refetch option to force a full fetch
without negotiating common commits with the remote. Use when applying a
new partial clone filter to refetch all matching objects.
Signed-off-by: Robert Coup <robert@coup.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a refetch option to fetch-pack to force a full fetch. Use when
applying a new partial clone filter to refetch all matching objects.
Signed-off-by: Robert Coup <robert@coup.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow a "refetch" where the contents of the local object store are
ignored and a full fetch is performed, not attempting to find or
negotiate common commits with the remote.
A key use case is to apply a new partial clone blob/tree filter and
refetch all the associated matching content, which would otherwise not
be transferred when the commit objects are already present locally.
Signed-off-by: Robert Coup <robert@coup.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a specific initializer for the noop fetch negotiator. This is
introduced to support allowing partial clones to skip commit negotiation
when performing a "refetch".
Signed-off-by: Robert Coup <robert@coup.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding [1] (pack-objects: move revs out of
get_object_list(), 2022-03-22) the "repo_init_revisions()" was moved
to cmd_pack_objects() so that it unconditionally took place for all
invocations of "git pack-objects".
We'd thus start leaking memory, which is easily reproduced in
e.g. git.git by feeding e83c516331 (Initial revision of "git", the
information manager from hell, 2005-04-07) to "git pack-objects";
$ echo e83c516331 | ./git pack-objects initial
[...]
==19130==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 7120 byte(s) in 1 object(s) allocated from:
#0 0x455308 in __interceptor_malloc (/home/avar/g/git/git+0x455308)
#1 0x75b399 in do_xmalloc /home/avar/g/git/wrapper.c:41:8
#2 0x75b356 in xmalloc /home/avar/g/git/wrapper.c:62:9
#3 0x5d7609 in prep_parse_options /home/avar/g/git/diff.c:5647:2
#4 0x5d415a in repo_diff_setup /home/avar/g/git/diff.c:4621:2
#5 0x6dffbb in repo_init_revisions /home/avar/g/git/revision.c:1853:2
#6 0x4f599d in cmd_pack_objects /home/avar/g/git/builtin/pack-objects.c:3980:2
#7 0x4592ca in run_builtin /home/avar/g/git/git.c:465:11
#8 0x457d81 in handle_builtin /home/avar/g/git/git.c:718:3
#9 0x458ca5 in run_argv /home/avar/g/git/git.c:785:4
#10 0x457b40 in cmd_main /home/avar/g/git/git.c:916:19
#11 0x562259 in main /home/avar/g/git/common-main.c:56:11
#12 0x7fce792ac7ec in __libc_start_main csu/../csu/libc-start.c:332:16
#13 0x4300f9 in _start (/home/avar/g/git/git+0x4300f9)
SUMMARY: LeakSanitizer: 7120 byte(s) leaked in 1 allocation(s).
Aborted
Narrowly fixing that commit would have been easy, just add call
repo_init_revisions() right before get_object_list(), which is
effectively what was done before that commit.
But an unstated constraint when setting it up early is that it was
needed for the subsequent [2] (pack-objects: parse --filter directly
into revs.filter, 2022-03-22), i.e. we might have a --filter
command-line option, and need to either have the "struct rev_info"
setup when we encounter that option, or later.
Let's just change the control flow so that we'll instead set up the
"struct rev_info" only when we need it. Doing so leads to a bit more
verbosity, but it's a lot clearer what we're doing and why.
An earlier version of this commit[3] went behind
opt_parse_list_objects_filter()'s back by faking up a "struct option"
before calling it. Let's avoid that and instead create a blessed API
for this pattern.
We could furthermore combine the two get_object_list() invocations
here by having repo_init_revisions() invoked on &pfd.revs, but I think
clearly separating the two makes the flow clearer. Likewise
redundantly but explicitly (i.e. redundant v.s. a "{ 0 }") "0" to
"have_revs" early in cmd_pack_objects().
While we're at it add parentheses around the arguments to the OPT_*
macros in in list-objects-filter-options.h, as we need to change those
lines anyway. It doesn't matter in this case, but is good general
practice.
1. https://lore.kernel.org/git/619b757d98465dbc4995bdc11a5282fbfcbd3daa.1647970119.git.gitgitgadget@gmail.com
2. https://lore.kernel.org/git/97de926904988b89b5663bd4c59c011a1723a8f5.1647970119.git.gitgitgadget@gmail.com
3. https://lore.kernel.org/git/patch-1.1-193534b0f07-20220325T121715Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git fetch --recurse-submodules" grabbed submodule commits
that would be needed to recursively check out newly fetched commits
in the superproject, it only paid attention to submodules that are
in the current checkout of the superproject. We now do so for all
submodules that have been run "git submodule init" on.
* gc/recursive-fetch-with-unused-submodules:
submodule: fix latent check_has_commit() bug
fetch: fetch unpopulated, changed submodules
submodule: move logic into fetch_task_create()
submodule: extract get_fetch_task()
submodule: store new submodule commits oid_array in a struct
submodule: inline submodule_commits() into caller
submodule: make static functions read submodules from commits
t5526: create superproject commits with test helper
t5526: stop asserting on stderr literally
t5526: introduce test helper to assert on fetches
Updates to refs traditionally weren't fsync'ed, but we can
configure using core.fsync variable to do so.
* ps/fsync-refs:
core.fsync: new option to harden references
Replace core.fsyncObjectFiles with two new configuration variables,
core.fsync and core.fsyncMethod.
* ns/core-fsyncmethod:
core.fsync: documentation and user-friendly aggregate options
core.fsync: new option to harden the index
core.fsync: add configuration parsing
core.fsync: introduce granular fsync control infrastructure
core.fsyncmethod: add writeout-only mode
wrapper: make inclusion of Windows csprng header tightly scoped
Create 2x2 test matrix with the untracked-cache and fsmonitor--daemon
features and a series of edits and verify that status output is
identical.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Measure the time taken to apply the FSMonitor query result
to the index and the untracked-cache.
Set the `FSMONITOR_CHANGED` bit on `istate->cache_changed` when
FSMonitor returns a very large repsonse to ensure that the index is
written to disk.
Normally, when the FSMonitor response includes a tracked file, the
index is always updated. Similarly, the index might be updated when
the response alters the untracked-cache (when enabled). However, in
cases where neither of those cause the index to be considered changed,
the FSMonitor response is wasted. Subsequent Git commands will make
requests with the same token and receive the same response.
If that response is very large, performance may suffer. It would be
more efficient to force update the index now (and the token in the
index extension) in order to reduce the size of the response received
by future commands.
This was observed on Windows after a large checkout. On Windows, the
kernel emits events for the files that are changed as they are
changed. However, it might delay events for the containing
directories until the system is more idle (or someone scans the
directory (so it seems)). The first status following a checkout would
get the list of files. The subsequent status commands would get the
list of directories as the events trickled out. But they would never
catch up because the token was not advanced because the index wasn't
updated.
This list of directories caused `wt_status_collect_untracked()` to
unnecessarily spend time actually scanning them during each command.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fsmonitor--daemon client threads to create a cookie file
inside the .git directory and then wait until FS events for the
cookie are observed by the FS listener thread.
This helps address the racy nature of file system events by
blocking the client response until the kernel has drained any
event backlog.
This is especially important on MacOS where kernel events are
only issued with a limited frequency. See the `latency` argument
of `FSeventStreamCreate()`. The kernel only signals every `latency`
seconds, but does not guarantee that the kernel queue is completely
drained, so we may have to wait more than one interval. If we
increase the latency, the system is more likely to drop events.
We avoid these issues by having each client thread create a unique
cookie file and then wait until it is seen in the event stream.
Co-authored-by: Kevin Willford <Kevin.Willford@microsoft.com>
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fsmonitor--daemon to periodically truncate the list of
modified files to save some memory.
Clients will ask for the set of changes relative to a token that they
found in the FSMN index extension in the index. (This token is like a
point in time, but different). Clients will then update the index to
contain the response token (so that subsequent commands will be
relative to this new token).
Therefore, the daemon can gradually truncate the in-memory list of
changed paths as they become obsolete (older than the previous token).
Since we may have multiple clients making concurrent requests with a
skew of tokens and clients may be racing to the talk to the daemon,
we lazily truncate the list.
We introduce a 5 minute delay and truncate batches 5 minutes after
they are considered obsolete.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Repeat all of the fsmonitor perf tests using `git fsmonitor--daemon` and
the "Simple IPC" interface.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change p7519 to use `test_seq` and `xargs` rather than a `for` loop
to touch thousands of files. This takes minutes off of test runs
on Windows because of process creation overhead.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach `test-tool.exe chmtime` to ignore errors when setting the mtime
on a directory on Windows.
NEEDSWORK: The Windows version of `utime()` (aka `mingw_utime()`) does
not properly handle directories because it uses `_wopen()`. It should
be converted to using `CreateFileW()` and backup semantics at a minimum.
Since I'm already in the middle of a large patch series, I did not want
to destabilize other callers of `utime()` right now. The problem has
only been observed in the t/perf/p7519 test when the test repo contains
an empty directory on disk.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not copy any of the various fsmonitor--daemon files from the .git
directory of the (GIT_PREF_REPO or GIT_PERF_LARGE_REPO) source repo
into the test's trash directory.
When perf tests start, they copy the contents of the source repo into
the test's trash directory. If fsmonitor is running in the source repo,
there may be control files, such as the IPC socket and/or fsmonitor
cookie files. These should not be copied into the test repo.
Unix domain sockets cannot be copied in the manner used by the test
setup, so if present, the test setup fails.
Cookie files are harmless, but we should avoid them.
The builtin fsmonitor keeps all such control files/sockets in
.git/fsmonitor--daemon*, so it is simple to exclude them.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create an IPC client to send query and flush commands to the daemon.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the "feature: fsmonitor--daemon" message to the output of
`git version --build-options`.
The builtin FSMonitor is only available on certain platforms and
even then only when certain Makefile flags are enabled, so print
a message in the verbose version output when it is available.
This can be used by test scripts for prereq testing. Granted, tests
could just try `git fsmonitor--daemon status` and look for a 128 exit
code or grep for a "not supported" message on stderr, but these
methods are rather obscure.
The main advantage is that the feature message will automatically
appear in bug reports and other support requests.
This concept was also used during the development of Scalar for
similar reasons.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fsmonitor--daemon to respond to IPC requests from client
Git processes and respond with a list of modified pathnames
relative to the provided token.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include MacOS system declarations to allow us to use FSEvent and
CoreFoundation APIs. We need different versions of the declarations
for GCC vs. clang because of compiler and header file conflicts.
While it is quite possible to #include Apple's CoreServices.h when
compiling C source code with clang, trying to build it with GCC
currently fails with this error:
In file included
from /Library/Developer/CommandLineTools/SDKs/MacOSX10.14.sdk/System/...
...Library/Frameworks/Security.framework/Headers/AuthSession.h:32,
from /Library/Developer/CommandLineTools/SDKs/MacOSX10.14.sdk/System/...
...Library/Frameworks/Security.framework/Headers/Security.h:42,
from /Library/Developer/CommandLineTools/SDKs/MacOSX10.14.sdk/System/...
...Library/Frameworks/CoreServices.framework/Frameworks/...
...OSServices.framework/Headers/CSIdentity.h:43,
from /Library/Developer/CommandLineTools/SDKs/MacOSX10.14.sdk/System/...
...Library/Frameworks/CoreServices.framework/Frameworks/...
...OSServices.framework/Headers/OSServices.h:29,
from /Library/Developer/CommandLineTools/SDKs/MacOSX10.14.sdk/System/...
...Library/Frameworks/CoreServices.framework/Frameworks/...
...LaunchServices.framework/Headers/IconsCore.h:23,
from /Library/Developer/CommandLineTools/SDKs/MacOSX10.14.sdk/System/...
...Library/Frameworks/CoreServices.framework/Frameworks/...
...LaunchServices.framework/Headers/LaunchServices.h:23,
from /Library/Developer/CommandLineTools/SDKs/MacOSX10.14.sdk/System/...
...Library/Frameworks/CoreServices.framework/Headers/CoreServices.h:45,
/Library/Developer/CommandLineTools/SDKs/MacOSX10.14.sdk/System/...
...Library/Frameworks/Security.framework/Headers/Authorization.h:193:7:
error: variably modified 'bytes' at file scope
193 | char bytes[kAuthorizationExternalFormLength];
| ^~~~~
The underlying reason is that GCC (rightfully) objects that an `enum`
value such as `kAuthorizationExternalFormLength` is not a constant
(because it is not, the preprocessor has no knowledge of it, only the
actual C compiler does) and can therefore not be used to define the size
of a C array.
This is a known problem and tracked in GCC's bug tracker:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93082
In the meantime, let's not block things and go the slightly ugly route
of declaring/defining the FSEvents constants, data structures and
functions that we need, so that we can avoid above-mentioned issue.
Let's do this _only_ for GCC, though, so that the CI/PR builds (which
build both with clang and with GCC) can guarantee that we _are_ using
the correct data types.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the win32 backend to register a watch on the working tree
root directory (recursively). Also watch the <gitdir> if it is
not inside the working tree. And to collect path change notifications
into batches and publish.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fsmonitor--daemon to build a list of changed paths and associate
them with a token-id. This will be used by the platform-specific
backends to accumulate changed paths in response to filesystem events.
The platform-specific file system listener thread receives file system
events containing one or more changed pathnames (with whatever
bucketing or grouping that is convenient for the file system). These
paths are accumulated (without locking) by the file system layer into
a `fsmonitor_batch`.
When the file system layer has drained the kernel event queue, it will
"publish" them to our token queue and make them visible to concurrent
client worker threads. The token layer is free to combine and/or de-dup
paths within these batches for efficient presentation to clients.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fsmonitor--daemon to create token-ids and define the
overall token naming scheme.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fsmonitor--daemon to classify relative and absolute
pathnames and decide how they should be handled. This will
be used by the platform-specific backend to respond to each
filesystem event.
When we register for filesystem notifications on a directory,
we get events for everything (recursively) in the directory.
We want to report to clients changes to tracked and untracked
paths within the working directory proper. We do not want to
report changes within the .git directory, for example.
This classification will be used in a later commit by the
different backends to classify paths as events are received.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement 'git fsmonitor--daemon start' command. This command starts
an instance of 'git fsmonitor--daemon run' in the background using
the new 'start_bg_command()' function.
We avoid the fork-and-call technique on Unix systems in favor of a
fork-and-exec technique. This gives us more uniform Trace2 child-*
events. It also makes our usage more consistent with Windows usage.
On Windows, teach 'git fsmonitor--daemon run' to optionally call
'FreeConsole()' to release handles to the inherited Win32 console
(despite being passed invalid handles for stdin/out/err). Without
this, command prompts and powershell terminal windows could hang
in "exit" until the last background child process exited or released
their Win32 console handle. (This was not seen with git-bash shells
because they don't have a Win32 console attached to them.)
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement `run` command to try to begin listening for file system events.
This version defines the thread structure with a single fsmonitor_fs_listen
thread to watch for file system events and a simple IPC thread pool to
watch for connection from Git clients over a well-known named pipe or
Unix domain socket.
This commit does not actually do anything yet because the platform
backends are still just stubs.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stub in empty implementation of fsmonitor--daemon
backend for Darwin (aka MacOS).
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stub in empty filesystem listener backend for fsmonitor--daemon on Windows.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement `stop` and `status` client commands to control and query the
status of a `fsmonitor--daemon` server process (and implicitly start a
server process if necessary).
Later commits will implement the actual server and monitor the file
system.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a built-in file system monitoring daemon that can be used by
the existing `fsmonitor` feature (protocol API and index extension)
to improve the performance of various Git commands, such as `status`.
The `fsmonitor--daemon` feature builds upon the `Simple IPC` API and
provides an alternative to hook access to existing fsmonitors such
as `watchman`.
This commit merely adds the new command without any functionality.
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document how `core.fsmonitor` can be set to a boolean to enable
or disable the builtin FSMonitor.
Update references to `core.fsmonitor` and `core.fsmonitorHookVersion` and
pointers to `Watchman` to refer to it.
Create `git-fsmonitor--daemon` manual page and describe its features.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use simple IPC to directly communicate with the new builtin file
system monitor daemon when `core.fsmonitor` is set to true.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move fsmonitor config settings to a new and opaque
`struct fsmonitor_settings` structure. Add a lazily-loaded pointer
to this into `struct repo_settings`
Create an `enum fsmonitor_mode` type in `struct fsmonitor_settings` to
represent the state of fsmonitor. This lets us represent which, if
any, fsmonitor provider (hook or IPC) is enabled.
Create `fsm_settings__get_*()` getters to lazily look up fsmonitor-
related config settings.
Get rid of the `core_fsmonitor` global variable. Move the code to
lookup the existing `core.fsmonitor` config value into the fsmonitor
settings.
Create a hook pathname variable in `struct fsmonitor-settings` and
only set it when in hook mode.
Extend the definition of `core.fsmonitor` to be either a boolean
or a hook pathname. When true, the builtin FSMonitor is used.
When false or unset, no FSMonitor (neither builtin nor hook) is
used.
The existing `core_fsmonitor` global variable was used to store the
pathname to the fsmonitor hook *and* it was used as a boolean to see
if fsmonitor was enabled. This dual usage and global visibility leads
to confusion when we add the IPC-based provider. So lets hide the
details in fsmonitor-settings.c and let it decide which provider to
use in the case of multiple settings. This avoids cluttering up
repo-settings.c with these private details.
A future commit in builtin-fsmonitor series will add the ability to
disqualify worktrees for various reasons, such as being mounted from a
remote volume, where fsmonitor should not be started. Having the
config settings hidden in fsmonitor-settings.c allows such worktree
restrictions to override the config values used.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create fsmonitor_ipc__*() client routines to spawn the built-in file
system monitor daemon and send it an IPC request using the `Simple
IPC` API.
Stub in empty fsmonitor_ipc__*() functions for unsupported platforms.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation of test_subcommand_inexact() was originally
introduced in e4d0c11c0 (repack: respect kept objects with '--write-midx
-b', 2021-12-20) with the intention to allow finding a subcommand based
on an initial set of arguments. The inexactness was intended as a way to
allow flexible options beyond that initial set, as opposed to
test_subcommand() which requires that the full list of options is
provided in its entirety.
The implementation began by copying test_subcommand() and replaced the
repeated argument 'printf' statement to append ".*" instead of "," to
each argument. This caused it to be more flexible than initially
intended.
The previous change deleted the only use of test_subcommand_inexact, so
instead of editing the helper, delete it.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--write-midx -b packs non-kept objects' test in t7700-repack.sh
uses test_subcommand_inexact to check that 'git repack' properly adds
the '--honor-pack-keep' flag to the 'git pack-objects' subcommand.
However, the test_subcommand_inexact helper is more flexible than
initially designed, and this instance is the only one that makes use of
it: there are additional arguments between 'git pack-objects' and the
'--honor-pack-keep' flag. In order to make test_subcommand_inexact more
strict, we need to fix this instance.
This test checks that 'git repack --write-midx -a -b -d' will create a
new pack-file that does not contain the objects within the kept pack.
This behavior is possible because of the multi-pack-index bitmap that
will bitmap objects against multiple packs. Without --write-midx, the
objects in the kept pack would be duplicated so the resulting pack is
closed under reachability and bitmaps can be created against it. This is
discussed in more detail in e4d0c11c0 (repack: respect kept objects with
'--write-midx -b', 2021-12-20) which also introduced this instance of
test_subcommand_inexact.
To better verify the intended post-conditions while also removing this
instance of test_subcommand_inexact, rewrite the test to check the list
of packed objects in the kept pack and the list of the objects in the
newly-repacked pack-file _other_ than the kept pack. These lists should
be disjoint.
Be sure to include a non-kept pack-file and loose objects to be extra
careful that this is properly behaving with kept packs and not just
avoiding repacking all pack-files.
Co-authored-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "--immediate" option so that it emits valid TAP on
failure. Before this it would omit the required plan at the end,
e.g. under SANITIZE=leak we'd show a "No plan found in TAP output"
error from "prove":
$ prove t0006-date.sh :: --immediate
t0006-date.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/22 subtests
Test Summary Report
-------------------
t0006-date.sh (Wstat: 256 Tests: 22 Failed: 1)
Failed test: 22
Non-zero exit status: 1
Parse errors: No plan found in TAP output
Files=1, Tests=22, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.18 cusr 0.06 csys = 0.27 CPU)
Result: FAIL
Now we'll emit output that doesn't result in TAP parsing failures:
$ prove t0006-date.sh :: --immediate
t0006-date.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/22 subtests
Test Summary Report
-------------------
t0006-date.sh (Wstat: 256 Tests: 22 Failed: 1)
Failed test: 22
Non-zero exit status: 1
Files=1, Tests=22, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.19 cusr 0.05 csys = 0.26 CPU)
Result: FAIL
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the short help output from "git reset -h", the recently added
"--[no-]refresh" option is shown like so:
--refresh skip refreshing the index after reset
which explains what happens when the option is given in the negative
form, i.e. "--no-refresh". We could rephrase the explanation to
read "refresh the index after reset (default)" to hint that the user
can say "--no-refresh" to override the default, but listing the
"--no-refresh" form in the list of options would be more helpful.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Acked-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "git reflog show -h" output to show the usage summary
relevant to it, rather than displaying the same output that "git log
-h" would show.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continue the work started in 33d7bdd645 (builtin/reflog.c: use
parse-options api for expire, delete subcommands, 2022-01-06) and
convert the cmd_reflog() function itself to use the parse_options()
API.
Let's also add a test which would fail if we forgot
PARSE_OPT_NO_INTERNAL_HELP here, as well as making sure that we'll
still pass through "--" by supplying PARSE_OPT_KEEP_DASHDASH. For that
test we need to change "test_commit()" to accept files starting with
"--".
The "git reflog -h" usage will now show the usage for all of the
sub-commands, rather than a terse summary which wasn't
correct (e.g. "git reflog exists" is not a valid command). See my
8757b35d44 (commit-graph: define common usage with a macro,
2021-08-23) for prior art.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the 'reset.refresh' option, requiring that users explicitly specify
'--no-refresh' if they want to skip refreshing the index.
The 'reset.refresh' option was introduced in 101cee42dd (reset: introduce
--[no-]refresh option to --mixed, 2022-03-11) as a replacement for the
refresh-skipping behavior originally controlled by 'reset.quiet'.
Although 'reset.refresh=false' functionally served the same purpose as
'reset.quiet=true', it exposed [1] the fact that the existence of a global
"skip refresh" option could potentially cause problems for users. Allowing a
global config option to avoid refreshing the index forces scripts using 'git
reset --mixed' to defensively use '--refresh' if index refresh is expected;
if that option is missing, behavior of a script could vary from user-to-user
without explanation.
Furthermore, globally disabling index refresh in 'reset --mixed' was
initially devised as a passive performance improvement; since the
introduction of the option, other changes have been made to Git (e.g., the
sparse index) with a greater potential performance impact without
sacrificing index correctness. Therefore, we can more aggressively err on
the side of correctness and limit the cases of skipping index refresh to
only when a user specifies the '--no-refresh' option.
[1] https://lore.kernel.org/git/xmqqy2179o3c.fsf@gitster.g/
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the 'reset.quiet' config option, remove '--no-quiet' documentation in
'Documentation/git-reset.txt'. In 4c3abd0551 (reset: add new reset.quiet
config setting, 2018-10-23), 'reset.quiet' was introduced as a way to
globally change the default behavior of 'git reset --mixed' to skip index
refresh.
However, now that '--quiet' does not affect index refresh, 'reset.quiet'
would only serve to globally silence logging. This was not the original
intention of the config setting, and there's no precedent for such a setting
in other commands with a '--quiet' option, so it appears to be obsolete.
In addition to the options & its documentation, remove 'reset.quiet' from
the recommended config for 'scalar'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update '--quiet' to no longer implicitly skip refreshing the index in a
mixed reset. Users now have the ability to explicitly disable refreshing the
index with the '--no-refresh' option, so they no longer need to use
'--quiet' to do so. Moreover, we explicitly remove the refresh-skipping
behavior from '--quiet' because it is completely unrelated to the stated
purpose of the option: "Be quiet, only report errors."
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line completion support (in contrib/) learns to give
modified paths to the "git restore" command.
* dc/complete-restore:
completion: tab completion of filenames for 'git restore'
Optimize away strbuf_expand() call with a hardcoded formatting logic
specific for the default format in the --batch and --batch-check
options of "git cat-file".
* jc/cat-file-batch-default-format-optim:
cat-file: skip expanding default format
"git repack" learned a new configuration to disable triggering of
age-old "update-server-info" command, which is rarely useful these
days.
* ps/repack-with-server-info:
repack: add config to skip updating server info
repack: refactor to avoid double-negation of update-server-info
"git name-rev" learned to use the generation numbers when setting
the lower bound of searching commits used to explain the revision,
when available, instead of committer time.
* jk/name-rev-w-genno:
name-rev: use generation numbers if available
Get rid of one use of __asm__() GCC extension that does not help us
much these days, which has an added advantage of not having to
worry about -pedantic complaining.
* bc/block-sha1-without-gcc-asm-extension:
block-sha1: remove use of obsolete x86 assembly
Rewrite of "git submodule update" in C (early part).
* gc/submodule-update-part1:
submodule--helper update-clone: check for --filter and --init
submodule update: add tests for --filter
submodule--helper: remove ensure-core-worktree
submodule--helper update-clone: learn --init
submodule--helper: allow setting superprefix for init_submodule()
submodule--helper: refactor get_submodule_displaypath()
submodule--helper run-update-procedure: learn --remote
submodule--helper: don't use bitfield indirection for parse_options()
submodule--helper: get remote names from any repository
submodule--helper run-update-procedure: remove --suboid
submodule--helper: reorganize code for sh to C conversion
submodule--helper: remove update-module-mode
submodule tests: test for init and update failure output
The previous change moved the 'filter' capability to the end of the 'git
bundle verify' output. Now, add the 'object-format' capability to the
output, when it exists.
This change makes 'git bundle verify' output the hash used in all cases,
even if the capability is not in the bundle. This means that v2 bundles
will always output that they use "sha1". This might look noisy to some
users, but it does simplify the implementation and the test strategy for
this feature.
Since 'verify' ends early when a prerequisite commit is missing, we need
to insert this hash message carefully into our expected test output
throughout t6020.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'filter' capability was added in 105c6f14a (bundle: parse filter
capability, 2022-03-09), but was added in a strange place in the 'git
bundle verify' output.
The tests for this show output like the following:
The bundle contains these 2 refs:
<COMMIT1> <REF1>
<COMMIT2> <REF2>
The bundle uses this filter: blob:none
The bundle records a complete history.
This looks very odd if we have a thin bundle that contains boundary
commits instead of a complete history:
The bundle contains these 2 refs:
<COMMIT1> <REF1>
<COMMIT2> <REF2>
The bundle uses this filter: blob:none
The bundle requires these 2 refs:
<COMMIT3>
<COMMIT4>
This separation between tip refs and boundary refs is unfortunate. Move
the filter capability output to the end of the output. Update the
documentation to match.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change moved the 'revs' variable into cmd_pack_objects()
and now we can remove the global filter_options in favor of revs.filter.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We intend to parse the --filter option directly into revs.filter, but we
first need to move the 'revs' variable out of get_object_list() and pass
it as a pointer instead. This change only deals with the issues of
making that work.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have established the command-line interface for the --[no-]filter
options for a while now, so we do not need a helper to make this
editable in the future.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 6d158cba28 (bash completion: Support "divergence from upstream"
messages in __git_ps1, 2010-06-17) introduced support for indicating
divergence from upstream in the PS1 prompt. The comments at the top of
git-prompt.sh that were introduced with that commit are several
paragraphs long. Over the years, other comments have been inserted in
between the paragraphs relating to divergence from upstream.
This commit puts the comments relating to divergence from upstream back
together.
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a pipe as a separator before long upstream state indicator. This is
consistent with long state indicators for sparse and in-progress
operations (e.g. merge).
For comparison, `__git_ps1` examples without upstream state indicator:
(main)
(main %)
(main *%)
(main|SPARSE)
(main %|SPARSE)
(main *%|SPARSE)
(main|SPARSE|REBASE 1/2)
(main %|SPARSE|REBASE 1/2)
Note that if there are long state indicators, they appear after short
state indicators if there are any, or after the branch name if there are
no short state indicators. Each long state indicator begins with a pipe
(`|`) as a separator.
Before/after examples with long upstream state indicator:
| Before | After |
| ------------------------------- | ------------------------------- |
| (main u=) | (main|u=) |
| (main u= origin/main) | (main|u= origin/main) |
| (main u+1) | (main|u+1) |
| (main u+1 origin/main) | (main|u+1 origin/main) |
| (main % u=) | (main %|u=) |
| (main % u= origin/main) | (main %|u= origin/main) |
| (main % u+1) | (main %|u+1) |
| (main % u+1 origin/main) | (main %|u+1 origin/main) |
| (main|SPARSE u=) | (main|SPARSE|u=) |
| (main|SPARSE u= origin/main) | (main|SPARSE|u= origin/main) |
| (main|SPARSE u+1) | (main|SPARSE|u+1) |
| (main|SPARSE u+1 origin/main) | (main|SPARSE|u+1 origin/main) |
| (main %|SPARSE u=) | (main %|SPARSE|u=) |
| (main %|SPARSE u= origin/main) | (main %|SPARSE|u= origin/main) |
| (main %|SPARSE u+1) | (main %|SPARSE|u+1) |
| (main %|SPARSE u+1 origin/main) | (main %|SPARSE|u+1 origin/main) |
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make upstream state indicator location more consistent with similar
state indicators (e.g. sparse). Group the short upstream state indicator
(`=`, `<`, `>`, or `<>`) with other short state indicators immediately
after the branch name. Previously short and long upstream state
indicators appeared after all other state indicators.
Use a separator (`SP` or `GIT_PS1_STATESEPARATOR`) between branch name
and short upstream state indicator. Previously the short upstream state
indicator would sometimes appear directly adjacent to the branch name
instead of being separated.
For comparison, `__git_ps1` examples without upstream state indicator:
(main)
(main %)
(main *%)
(main|SPARSE)
(main %|SPARSE)
(main *%|SPARSE)
(main|SPARSE|REBASE 1/2)
(main %|SPARSE|REBASE 1/2)
Note that if there are short state indicators, they appear together
after the branch name and separated from it by `SP` or
`GIT_PS1_STATESEPARATOR`.
Before/after examples with short upstream state indicator:
| Before | After |
| ---------------- | ---------------- |
| (main=) | (main =) |
| (main|SPARSE=) | (main =|SPARSE) |
| (main %|SPARSE=) | (main %=|SPARSE) |
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In `__git_ps1_show_upstream` rename the variable `upstream` to
`upstream_type`. This allows `__git_ps1_show_upstream` to reference a
variable named `upstream` that is declared `local` in `__git_ps1`, which
calls `__git_ps1_show_upstream`.
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in a8cc594333 (hooks: fix an obscure TOCTOU "did we
just run a hook?" race, 2022-03-07): The "invoked_hook" variable
passed to run_commit_hook() wasn't passed forward to run_hooks_opt(),
as push_to_checkout() in that commit correctly did.
Whether we ran the code contingent on having run the hook or not was
thus undefined, but in practice on most (all?) modern platforms we'd
have run it (almost?) all the time, since stack variables will get
initialized to some random value, which most of the time isn't "0".
This bug was revealed by running e.g. "t5537-fetch-shallow.sh" with
the --valgrind option. Unfortunately running the whole test suite with
--valgrind is really slow, so we didn't have a CI job that spotted
this. The --valgrind output was:
==31275== Conditional jump or move depends on uninitialised value(s)
==31275== at 0x43C63F: prepare_to_commit (commit.c:1058)
==31275== by 0x4396A5: cmd_commit (commit.c:1722)
==31275== by 0x407C8A: run_builtin (git.c:465)
==31275== by 0x406741: handle_builtin (git.c:718)
==31275== by 0x407665: run_argv (git.c:785)
==31275== by 0x406500: cmd_main (git.c:916)
==31275== by 0x510839: main (common-main.c:56)
==31275== Uninitialised value was created by a stack allocation
==31275== at 0x43B344: prepare_to_commit (commit.c:719)
Reported-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the various if/else in the callbacks for the "fast path" a lot
easier to read by just using common functions for the parts that are
common, and have per-format callbacks for those parts that are
different.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --name-only and --name-status options are synonyms, but let's
detect and error if both are provided.
In addition let's add explicit --format tests for the combination of
these various options.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'--object-only' is an alias for '--format=%(objectname)'. It cannot
be used together other format-altering options like '--name-only',
'--long' or '--format', they are mutually exclusive.
The "--name-only" option outputs <filepath> only. Likewise, <objectName>
is another high frequency used field, so implement '--object-only' option
will bring intuitive and clear semantics for this scenario. Using
'--format=%(objectname)' we can achieve a similar effect, but the former
is with a lower learning cost(without knowing the format requirement
of '--format' option).
Even so, if a user is prefer to use "--format=%(objectname)", this is entirely
welcome because they are not only equivalent in function, but also have almost
identical performance. The reason is this commit also add the specific of
"--format=%(objectname)" to the current fast-pathes (builtin formats) to
avoid running unnecessary parsing mechanisms.
The following performance benchmarks are based on torvalds/linux.git:
When hit the fast-path:
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --object-only HEAD
Time (mean ± σ): 83.6 ms ± 2.0 ms [User: 59.4 ms, System: 24.1 ms]
Range (min … max): 80.4 ms … 87.2 ms 35 runs
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(objectname)' HEAD
Time (mean ± σ): 84.1 ms ± 1.8 ms [User: 61.7 ms, System: 22.3 ms]
Range (min … max): 80.9 ms … 87.5 ms 35 runs
But for a customized format, it will be slower:
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='oid: %(objectname)' HEAD
Time (mean ± σ): 96.5 ms ± 2.5 ms [User: 72.9 ms, System: 23.5 ms]
Range (min … max): 93.1 ms … 104.1 ms 31 runs
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --format option to ls-tree. It has an existing default output,
and then --long and --name-only options to emit the default output
along with the objectsize and, or to only emit object paths.
Rather than add --type-only, --object-only etc. we can just support a
--format using a strbuf_expand() similar to "for-each-ref
--format". We might still add such options in the future for
convenience.
The --format implementation is slower than the existing code, but this
change does not cause any performance regressions. We'll leave the
existing show_tree() unchanged, and only run show_tree_fmt() in if
a --format different than the hardcoded built-in ones corresponding to
the existing modes is provided.
I.e. something like the "--long" output would be much slower with
this, mainly due to how we need to allocate various things to do with
quote.c instead of spewing the output directly to stdout.
The new option of '--format' comes from Ævar Arnfjörð Bjarmasonn's
idea and suggestion, this commit makes modifications in terms of the
original discussion on community [1].
In [1] there was a "GIT_TEST_LS_TREE_FORMAT_BACKEND" variable to
ensure that we had test coverage for passing tests that would
otherwise use show_tree() through show_tree_fmt(), and thus that the
formatting mechanism could handle all the same cases as the
non-formatting options.
Somewhere in subsequent re-rolls of that we seem to have drifted away
from what the goal of these tests should be. We're trying to ensure
correctness of show_tree_fmt(). We can't tell if we "hit [the]
fast-path" here, and instead of having an explicit test for that, we
can just add it to something our "test_ls_tree_format" tests for.
Here is the statistics about performance tests:
1. Default format (hitten the builtin formats):
"git ls-tree <tree-ish>" vs "--format='%(mode) %(type) %(object)%x09%(file)'"
$hyperfine --warmup=10 "/opt/git/master/bin/git ls-tree -r HEAD"
Benchmark 1: /opt/git/master/bin/git ls-tree -r HEAD
Time (mean ± σ): 105.2 ms ± 3.3 ms [User: 84.3 ms, System: 20.8 ms]
Range (min … max): 99.2 ms … 113.2 ms 28 runs
$hyperfine --warmup=10 "/opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(mode) %(type) %(object)%x09%(file)' HEAD"
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(mode) %(type) %(object)%x09%(file)' HEAD
Time (mean ± σ): 106.4 ms ± 2.7 ms [User: 86.1 ms, System: 20.2 ms]
Range (min … max): 100.2 ms … 110.5 ms 29 runs
2. Default format includes object size (hitten the builtin formats):
"git ls-tree -l <tree-ish>" vs "--format='%(mode) %(type) %(object) %(size:padded)%x09%(file)'"
$hyperfine --warmup=10 "/opt/git/master/bin/git ls-tree -r -l HEAD"
Benchmark 1: /opt/git/master/bin/git ls-tree -r -l HEAD
Time (mean ± σ): 335.1 ms ± 6.5 ms [User: 304.6 ms, System: 30.4 ms]
Range (min … max): 327.5 ms … 348.4 ms 10 runs
$hyperfine --warmup=10 "/opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(mode) %(type) %(object) %(size:padded)%x09%(file)' HEAD"
Benchmark 1: /opt/git/ls-tree-oid-only/bin/git ls-tree -r --format='%(mode) %(type) %(object) %(size:padded)%x09%(file)' HEAD
Time (mean ± σ): 337.2 ms ± 8.2 ms [User: 309.2 ms, System: 27.9 ms]
Range (min … max): 328.8 ms … 349.4 ms 10 runs
Links:
[1] https://public-inbox.org/git/RFC-patch-6.7-eac299f06ff-20211217T131635Z-avarab@gmail.com/
[2] https://lore.kernel.org/git/cb717d08be87e3239117c6c667cb32caabaad33d.1646390152.git.dyroneteng@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A convenient way to pad strings is to use something like
`strbuf_addf(&buf, "%20s", "Hello, world!")`.
However, the Coccinelle rule that forbids a format `"%s"` with a
constant string argument cast too wide a net, and also forbade such
padding.
The original rule was introduced by commit:
28c23cd4c3 (strbuf.cocci: suggest strbuf_addbuf() to add one strbuf to an other, 2019-01-25)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"show_tree_data" is a struct that packages the necessary fields for
"show_tree()". This commit is a pre-prepared commit for supporting
"--format" option and it does not affect any existing functionality.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a non-functional change, we introduce an enum "ls_tree_cmdmode"
then use it to mark which columns to output.
This has the advantage of making the show_tree logic simpler and more
readable, as well as making it easier to extend new options (for example,
if we want to add a "--object-only" option, we just need to add a similar
"short-circuit logic in "show_tree()").
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we execute "git ls-tree" with combined "--name-only" and "--long"
, only the pathname will be printed, the size is omitted (the original
discoverer was Peff in [1]).
This commit fix this issue by using `OPT_CMDMODE()` instead to make both
of them mutually exclusive.
[1] https://public-inbox.org/git/YZK0MKCYAJmG+pSU@coredump.intra.peff.net/
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the object_type() function to determine the object type from the
"mode" passed to us by read_tree(), instead of doing so with the S_*()
macros.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyronetengb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable which "show_tree()" return is named "retval", a name that's
a little hard to understand. The commit rename "retval" to "recurse"
which is a more meaningful name than before in the context. We do not
need to take a look at "read_tree_at()" in "tree.c" to make sure what
does "retval" mean.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "struct strbuf"'s "len" member is a "size_t", not an "int", so
let's change our corresponding types accordingly. This also changes
the "len" and "speclen" variables, which are likewise used to store
the return value of strlen(), which returns "size_t", not "int".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the ls-tree.c code to use type_name() on the enum instead of
using the string constants. This doesn't matter either way for
performance, but makes this a bit easier to read as we'll no longer
need a strcmp() here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing {} to the "else" arms in show_tree() per the
CodingGuidelines.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove code added in f35a6d3bce (Teach core object handling functions
about gitlinks, 2007-04-09), later patched in 7d0b18a4da (Add output
flushing before fork(), 2008-08-04), and then finally ending up in its
current form in d3bee161fe (tree.c: allow read_tree_recursive() to
traverse gitlink entries, 2009-01-25). All while being commented-out!
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --name-status synonym for --name-only added in
c639a5548a (ls-tree: --name-only, 2005-12-01) had no tests, let's
make sure it works the same way as its sibling.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The single-key interactive operation used by "git add -p" has been
made more robust.
* pw/single-key-interactive:
add -p: disable stdin buffering when interactive.singlekey is set
terminal: set VMIN and VTIME in non-canonical mode
terminal: pop signal handler when terminal is restored
terminal: always reset terminal when reading without echo
Bundle file format gets extended to allow a partial bundle,
filtered by similar criteria you would give when making a
partial/lazy clone.
* ds/partial-bundles:
clone: fail gracefully when cloning filtered bundle
bundle: unbundle promisor packs
bundle: create filtered bundles
rev-list: move --filter parsing into revision.c
bundle: parse filter capability
list-objects: handle NULL function pointers
MyFirstObjectWalk: update recommended usage
list-objects: consolidate traverse_commit_list[_filtered]
pack-bitmap: drop filter in prepare_bitmap_walk()
pack-objects: use rev.filter when possible
revision: put object filter into struct rev_info
list-objects-filter-options: create copy helper
index-pack: document and test the --promisor option
The method to trigger malloc check used in our tests no longer work
with newer versions of glibc.
* ep/test-malloc-check-with-glibc-2.34:
test-lib: declare local variables as local
test-lib.sh: Use GLIBC_TUNABLES instead of MALLOC_CHECK_ on glibc >= 2.34
Test fixes.
* sm/no-git-in-upstream-of-pipe-in-tests:
t0030-t0050: avoid pipes with Git on LHS
t0001-t0028: avoid pipes with Git on LHS
t0003: avoid pipes with Git on LHS
"git rebase A B" where B is not a commit should behave as if the
HEAD got detached at B and then the detached HEAD got rebased on top
of A. A bug however overwrites the current branch to point at B,
when B is a descendant of A (i.e. the rebase ends up being a
fast-forward). See [1] for the original bug report.
The callstack from checkout_up_to_date() is the following:
cmd_rebase()
-> checkout_up_to_date()
-> reset_head()
-> update_refs()
-> update_ref()
When B is not a valid branch but an oid, rebase sets the head_name
of rebase_options to NULL. This value gets passed down this call
chain through the branch member of reset_head_opts also getting set
to NULL all the way to update_refs().
Then update_refs() checks ropts.branch to decide whether or not to switch
branches. If ropts.branch is NULL, it calls update_ref() to update HEAD.
At this point however, from rebase's point of view, we want a detached
HEAD. But, since checkout_up_to_date() does not set the RESET_HEAD_DETACH
flag, the update_ref() call will deference HEAD and update the branch its
pointing to. We want the HEAD detached at B instead.
Fix this bug by adding the RESET_HEAD_DETACH flag in
checkout_up_to_date if B is not a valid branch, so that once
reset_head() calls update_refs(), it calls update_ref() with
REF_NO_DEREF which updates HEAD directly intead of deferencing it
and updating the branch that HEAD points to.
Also add a test to ensure the correct behavior.
[1] https://lore.kernel.org/git/YiokTm3GxIZQQUow@newk/
Reported-by: Michael McClimon <michael@mcclimon.org>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To prepare for the next commit that will test rebase with oids instead
of branch names, update the rebase setup test to add a couple of tags we
can use. This uses the test_commit helper so we can replace some lines
that add a commit manually.
Setting logAllRefUpdates is not necessary because it's on by default for
repositories with a working tree.
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "reflog exists" command added in afcb2e7a3b (git-reflog:
add exists command, 2015-07-21) to use parse_options() instead of its
own custom command-line parser. This continues work started in
33d7bdd645 (builtin/reflog.c: use parse-options api for expire,
delete subcommands, 2022-01-06).
As a result we'll understand the --end-of-options synonym for "--", so
let's test for that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make use of the guaranteed pretty alignment of "-h" output added in my
4631cfc20b (parse-options: properly align continued usage output,
2021-09-21) and wrap and format the "git reflog [expire|delete] -h"
usage output. Also add the missing "--single-worktree" option, as well
as adding other things that were in the SYNOPSIS output, but not in
the "-h" output.
This was last touched in 33d7bdd645 (builtin/reflog.c: use
parse-options api for expire, delete subcommands, 2022-01-06), but in
that commit the previous usage() output was faithfully
reproduced. Let's follow-up on that and make this even easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the "usage" variables in builtin/reflog.c to the top of the file,
in preparation for later commits defining a common "reflog_usage" in
terms of some of these strings, as was done in
8757b35d44 (commit-graph: define common usage with a macro,
2021-08-23).
While we're at it let's make them "const char *const", as is the
convention with these "usage" variables.
The use of macros here is a bit odd, but in subsequent commits we'll
make these use the same pattern as builtin/commit-graph.c uses since
8757b35d44 (commit-graph: define common usage with a macro,
2021-08-23).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were a few "git reflog exists" tests scattered over the test
suite, but let's consolidate the testing of the main functionality
into a new test file. This makes it easier to run just these tests
during development.
To do that amend and extend an existing test added in
afcb2e7a3b (git-reflog: add exists command, 2015-07-21). Let's use
"test_must_fail" instead of "!" (in case it segfaults), and test for
basic usage, an unknown option etc.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the "if" branches in cmd_reflog() to use "else if" instead,
and remove the whitespace between them.
As with 92f480909f (multi-pack-index: refactor "goto usage" pattern,
2021-08-23) this makes this code more consistent with how
builtin/{bundle,stash,commit-graph,multi-pack-index}.c look and
behave. Their top-level commands are all similar sub-command routing
functions.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reflog.c was lib-ified in 7d3d226e70 (reflog: libify delete
reflog function and helpers, 2022-03-02) these previously "static"
functions were made non-"static", but the argument lists were not
correspondingly indented according to our usual coding style. Let's do
that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reset_repository_shallow() is called, Git clears its cache of
shallow information, so that if shallow information is re-requested, Git
will read fresh data from disk instead of reusing its stale cached data.
However, the cache of commit grafts is not likewise cleared, even though
there are commit grafts created from shallow information.
This means that if on-disk shallow information were to be updated and
then a commit-graft-using codepath were run (for example, a revision
walk), Git would be using stale commit graft information. This can be
seen from the test in this patch, in which Git performs a revision walk
(to check for changed submodules) after a fetch with --update-shallow.
Therefore, clear the cache of commit grafts whenever
reset_repository_shallow() is called.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the http tests to use "test_hook" insteadd of
"write_script". In both cases we can get rid of sub-shelling. For
"t/t5550-http-fetch-dumb.sh" add a trivial helper which sets up the
hook and calls "update-server-info".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the t5411/*.sh tests to use the test_hook helper instead of
"write_script". Unfortunately these tests do the setup and test across
different test_expect_success blocks, so we have to use
--clobber (implying --setup) for these.
Let's change those that can use a quoted here-doc to do so while we're
at it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the "test_hook" function to take options to disable and remove
hooks. Using the wrapper instead of getting the path and running
"chmod -x" or "rm" will make it easier to eventually emulate the same
behavior with config-based hooks.
Not all of these tests need that new mode, but since the rest are
either closely related or use the same "$HOOK" pattern let's convert
them too.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cd475b3b03 (refs: add ability for backends to special-case reading
of symbolic refs, 2022-03-01) when the "read_symbolic_ref" callback
was added we'd fall back on "refs_read_raw_ref" if there wasn't any
backend implementation of "read_symbolic_ref".
As discussed in the preceding commit this would only happen if we were
running the "debug" backend, e.g. in the "setup for ref completion"
test in t9902-completion.sh with:
GIT_TRACE_REFS=1 git fetch --no-tags other
Let's improve the trace output, but and also eliminate the
now-redundant refs_read_raw_ref() fallback case. As noted in the
preceding commit the "packed" backend will never call
refs_read_symbolic_ref() (nor is it ever going to). For any future
backend such as reftable it's OK to ask that they either implement
this (or a wrapper) themselves.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the stub BUG(...) functions previously used by the "struct
ref_storage_be refs_be_packed" backend.
We never call any functions in the packed backend by using it as a
"normal" primary ref store, instead we'll always initialize a "files"
backend ref-store.
It will then via the "packed_ref_store" member of "struct
files_ref_store" call selected functions in the "packed" backend, and
we'll in addition call others via wrappers in refs.c.
So while these would arguably give us *slightly* more meaningful error
messages we'll NULL the missing members in the initializer anyway, so
we'll reliably get a segfault if we're ever changing the backend and
having it call something it doesn't have.
So there's no need for this verbose boilerplate, and as shown in a
subsequent commit it might even lead to some confusion about the
packed backend being a "real" backend. Let's make it clear that it's
not.
As an aside, this also fixes a warning emitted by SunCC in at least
versions 12.5 and 12.6 of Oracle Developer Studio:
"refs/packed-backend.c", line 1599: warning: Function has no return statement : packed_create_symref
"refs/packed-backend.c", line 1606: warning: Function has no return statement : packed_rename_ref)
"refs/packed-backend.c", line 1613: warning: Function has no return statement : packed_copy_ref
"refs/packed-backend.c", line 1648: warning: Function has no return statement : packed_create_reflog
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a few miscellaneous non-designated initializer assignments to
use designated initializers.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the definition of the three refs backends we currently carry to
use designated initializers.
The "= NULL" assignments being retained here are redundant, and could
be removed, but let's keep them for clarity. All of these backends
define almost all fields, so we're not saving much in terms of line
count by omitting these, but e.g. for "refs_be_debug" it's immediately
apparent that we're omitting "init" when comparing its assignment to
the others.
This is a follow-up to similar work merged in bd4232fac3 (Merge
branch 'ab/struct-init', 2021-07-16), a4b9fb6a5c (Merge branch
'ab/designated-initializers-more', 2021-10-18) and a30321b9ea (Merge
branch 'ab/designated-initializers' into
ab/designated-initializers-more, 2021-09-27).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit f2a454e0a5 (unpack-trees: improve performance of
next_cache_entry, 2021-11-29).
The "hint" value was originally needed to improve performance in 'git reset
-- <pathspec>' caused by 'cache_bottom' lagging behind its correct value
when using a sparse index. The 'cache_bottom' tracking has since been
corrected, removing the need for an additional "pseudo-cache_bottom"
tracking variable.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct tracking of the 'cache_bottom' for cases where sparse directories
are present in the index.
BACKGROUND
----------
The 'unpack_trees_options.cache_bottom' is a variable that tracks the
in-progress "bottom" of the cache as 'unpack_trees()' iterates through the
contents of the index. Most importantly, this value informs the sequential
return values of 'next_cache_entry()' which, in the "diff cache" usage of
'unpack_callback()', are either unpacked as-is or are passed into the diff
machinery.
The 'cache_bottom' is intended to track the position of the first entry in
the index that has not yet been diffed or unpacked. It is advanced in two
main ways: either it is incremented when an index entry is marked as "used"
(in 'mark_ce_used()'), indicating that it was unpacked or diffed, or when a
directory is unpacked, in which case it is increased by an amount equaling
the number of index entries inside that tree.
In 17a1bb570b (unpack-trees: preserve cache_bottom, 2021-07-14), it was
identified that sparse directories posed a problem to the above
'cache_bottom' advancement logic - because a sparse directory was both an
index entry that could be "used" and a directory that can be unpacked, the
'cache_bottom' would be incremented too many times. To solve this problem,
the 'mark_ce_used()' advancement of 'cache_bottom' was skipped for sparse
directories.
INCORRECT CACHE_BOTTOM TRACKING
-------------------------------
Skipping the 'cache_bottom' advancement for sparse directories in
'mark_ce_used()' breaks down in two cases:
1. When the 'unpack_trees()' operation is *not* a "cache diff" (because the
directory contents-based incrementing of 'cache_bottom' does not happen).
2. When a cache diff is performed with a pathspec (because
'unpack_index_entry()' will unpack a sparse directory not matched by the
pathspec without performing the directory contents-based increment).
The former luckily does not appear to affect 'git' behavior, likely because
'cache_bottom' is largely unused (non-"cache diff" 'unpack_trees()' uses
'find_index_entry()' - rather than 'next_cache_entry()' - to find the index
entries to unpack).
The latter, however, causes 'cache_bottom' to "lag behind" its intended
position by an amount equal to the number of sparse directories unpacked so
far with 'unpack_index_entry()'. If a repository is structured such that any
sparse directories are ordered lexicographically *after* any
pathspec-matching directories, though, this issue won't present any adverse
behavior.
This was the case with the 't1092-sparse-checkout-compatibility.sh' tests
before the addition of the 'before/' sparse directory (ordered *before* the
in-cone 'deep/' directory), therefore sidestepping the issue. Once the
'before/' directory was added, though, 'cache_bottom' began to lag behind
its intended position, causing 'next_cache_entry()' to return index entries
it had already processed and, ultimately, an incorrect diff.
CORRECTING CACHE_BOTTOM
-----------------------
The problems observed in 't1092' come from 'cache_bottom' lagging behind in
cases where the cache tree-based advancement doesn't occur. To solve this,
then, the fix in 17a1bb570b is "reversed"; rather than skipping
'cache_bottom' advancement in 'mark_ce_used()', we skip the directory
contents-based advancement for sparse directories. Now, every index entry
can be accounted for in 'cache_bottom':
* if you're working with a single index entry, 'cache_bottom' is incremented
in 'mark_ce_used()'
* if you're working with a directory that contains index entries (but is not
one itself), 'cache_bottom' is incremented by the number of entries in
that directory.
Finally, change the 'test_expect_failure' tests in 't1092' failing due to
this bug back to 'test_expect_success'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a sparse directory 'before/' containing files 'a' and 'b' to the test
repo used in 't/t1092-sparse-checkout-compatibility.sh'. This is meant to
ensure that no sparse index integrations rely on the in-cone path(s) being
lexicographically first in the repo.
Unfortunately, some existing tests do not handle this repo architecture
properly:
* 'add outside sparse cone'
* 'status/add: outside sparse cone'
* 'reset with pathspecs inside sparse definition'
All three of these are due to the incorrect handling of the
'unpack_trees_options.cache_bottom' when performing a cache diff via
'unpack_trees'. This will be corrected in a future patch; in the meantime,
mark the tests with 'test_expect_failure'.
Finally, update the 'ls-files' and 'root directory cannot be sparse' tests
to include the 'before/' directory in their expected index contents.
Co-authored-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
My a18d66cefb (diff.c: free "buf" in diff_words_flush(), 2022-03-04)
has what it retrospect is a rather obvious bug (I don't know what I
was thinking, if it all): We use the "emitted_symbols" allocation in
append_emitted_diff_symbol() N times, but starting with a18d66cefb
we'd free it after its first use!
The correct way to free this data would have been to add the free() to
the existing free_diff_words_data() function, so let's do that. The
"ecbdata->diff_words->opt->emitted_symbols" might be NULL, so let's
add a trivial free_emitted_diff_symbols() helper next to the function
that appends to it.
This fixes the "no effect on show from" leak tested for in the
preceding commit. Perhaps confusingly this change will skip that test
under SANITIZE=leak, but otherwise opt-in the
"t4015-diff-whitespace.sh" test.
The reason is that a18d66cefb "fixed" the leak in the preceding "no
effect on diff" test, but for the first call to diff_words_flush() the
"wol->buf" would be NULL, so we wouldn't double-free (and
SANITIZE=address would see nothing amiss). With this change we'll
still pass that test, showing that we've also fixed leaks on this
codepath.
We then have to skip the new "no effect on show" test because it
happens to trip over an unrelated memory leak (in revision.c). The
same goes for "move detection with submodules". Both of them pass with
SANITIZE=address though, which would error on the "no effect on show"
test before this change.
Reported-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a failing test which demonstrates a regression in
a18d66cefb ("diff.c: free "buf" in diff_words_flush()", 2022-03-04),
the regression is discussed in detail in the subsequent commit. With
it running `git show --word-diff --color-moved` with SANITIZE=address
would emit:
==31191==ERROR: AddressSanitizer: attempting double-free on 0x617000021100 in thread T0:
#0 0x49f0a2 in free (git+0x49f0a2)
#1 0x9b0e4d in diff_words_flush diff.c:2153:3
#2 0x9aed5d in fn_out_consume diff.c:2354:3
#3 0xe092ab in consume_one xdiff-interface.c:43:9
#4 0xe072eb in xdiff_outf xdiff-interface.c:76:10
#5 0xec7014 in xdl_emit_diffrec xdiff/xutils.c:53:6
[...]
0x617000021100 is located 0 bytes inside of 768-byte region [0x617000021100,0x617000021400)
freed by thread T0 here:
#0 0x49f0a2 in free (git+0x49f0a2)
[...(same stacktrace)...]
previously allocated by thread T0 here:
#0 0x49f603 in __interceptor_realloc (git+0x49f603)
#1 0xde4da4 in xrealloc wrapper.c:126:8
#2 0x995dc5 in append_emitted_diff_symbol diff.c:794:2
#3 0x96c44a in emit_diff_symbol diff.c:1527:3
[...]
This was not caught by the test suite because we test `diff
--word-diff --color-moved` only so far.
Therefore, add a test for `show`, too.
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make use of "test_hook" in various cases that didn't fit neatly into
preceding commits. Here we need to indent blocks in addition to
changing the test code, or to make other small cosmetic changes.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change tests that used a "mkdir -p .git/hooks && write_script" pattern
to use the new "test_hook" helper instead. The new helper does not
create the .git/hooks directory, rather we assume that the default
template will do so for us.
An upcoming series[1] will extend "test_hook" to operate in a
"--template=" mode, but for now assuming that we have a .git/hooks
already is a safe assumption. If that assumption becomes false in the
future we'll only need to change 'test_hook", instead of all of these
callsites.
1. https://lore.kernel.org/git/cover-00.13-00000000000-20211212T201308Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor various test code to use the "test_hook" helper. This change:
- Fixes the long-standing issues with those tests using "#!/bin/sh"
instead of "#!$SHELL_PATH". Using "#!/bin/sh" here happened to work
because this code was so simple that it e.g. worked on Solaris
/bin/sh.
- Removes the "mkdir .git/hooks" invocation, as explained in a
preceding commit we'll rely on the default templates to create that
directory for us.
For the test in "t5402-post-merge-hook.sh" it's easier and more
correct to unroll the for-loop into a test_expect_success, so let's do
that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the repository setup code for tests that test hooks the use
of sub-shells when setting up the test repository and hooks, and use
the "test_hook" wrapper instead of "write_scripts".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "t5516-fetch-push.sh" test code to make use of the new
"test_hook" helper, and to use "test_when_finished" to have tests
clean up their own state, instead of relying on subsequent tests to
clean the trash directory.
Before this each test would have been responsible for cleaning up
after a preceding test (which may or may not have run, e.g. if --run
or "GIT_SKIP_TESTS" was used), now each test will instead clean up
after itself.
In order to use both "test_hook" and "test_when_finished" we need to
move them out of sub-shells, which requires some refactoring.
While we're at it split up the "push with negotiation" test, now the
middle of the test doesn't need to "rm event", and since it delimited
two halves that were testing two different things the end-state is
easier to read and reason about.
While changing these lines make the minor change from "-fr" to "-rf"
as the "rm" argument, some of them used it already, it's more common
in the test suite, and it leaves the end-state of the file with more
consistency.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend a test added in 788a776069 (bugreport: collect list of
populated hooks, 2020-05-07) to "test_cmp" for the expected output,
instead of selectively using "grep" to check for specific things we
either expect or don't expect in the output.
As noted in a preceding commit our .git/hooks directory already
contains *.sample hooks, so we have no need to clobber the
prepare-commit-msg.sample hook in particular.
Instead we should assert that those *.sample hooks are not included in
the output, and for good measure let's add a new "unknown-hook", to
check that we only look through our own known hooks. See
cfe853e66b (hook-list.h: add a generated list of hooks, like
config-list.h, 2021-09-26) for how we generate that data.
We're intentionally not piping the "actual" output through "sort" or
similar, we'd also like to check that our reported hooks are sorted.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop moving the .git/hooks directory out of the way, or creating it
during test setup. Instead assume that it will contain
harmless *.sample files.
That we can assume that is discussed in point #4 of
f0d4d398e2 (test-lib: split up and deprecate test_create_repo(),
2021-05-10), those parts of this could and should have been done in
that change.
Removing the "mkdir -p" here will then validate that our templates are
being used, since we'd subsequently fail to create a hook in that
directory if it didn't exist. Subsequent commits will have those hooks
created by a "test_hook" wrapper, which will then being doing that
same validation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code added in a87679339c (test: rename http fetch and push
test files, 2014-02-06) to stop relying on the "exec git
update-server-info" in "templates/hooks--post-update.sample", let's
instead inline the expected hook in the test itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend a test added in 96e7225b31 (hook: add 'run' subcommand,
2021-12-22) to use a for-loop instead of a copy/pasting the same test
for the four exit codes we test.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a "test_hook" wrapper similar to the existing "test_config"
wrapper added in d960c47a88 (test-lib: add helper functions for
config, 2011-08-17).
This wrapper:
- Will clean up the hook with "test_when_finished", unless --setup is
provided.
- Will error if we clobber a hook, unless --clobber is provided.
- Takes a name like "update" instead of ".git/hooks/update".
- Accepts -C <dir>, like "test_config" and "test_commit".
By using a wrapper we'll be able to easily change all the hook-related
code that assumes that the template-created ".git/hooks" directory is
created by "init", "clone" etc. once another topic follows-up and
changes the test suite to stop creating trash directories using those
templates.
In addition this will make it easy to have the hooks configured using
the "configuration-based hooks" topic, once we get around to
integrating that. I.e. we'll be able to run the tests in a mode where
we sometimes create a .git/hooks/<name>, and other times create a
script in another location, and point the relevant configuration
snippet to it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Count string_list items in size_t, not "unsigned int".
* ab/string-list-count-in-size-t:
string-list API: change "nr" and "alloc" to "size_t"
gettext API users: don't explicitly cast ngettext()'s "n"
Code clean-up to allow callers of run_commit_hook() to learn if it
got "success" because the hook succeeded or because there wasn't
any hook.
* ab/racy-hooks:
hooks: fix an obscure TOCTOU "did we just run a hook?" race
merge: don't run post-hook logic on --no-verify
Teach "test-chmtime" to work on a directory and use it to avoid
having to wait for a second in a few places in tests.
* tk/t7063-chmtime-dirs-too:
t7063: mtime-mangling instead of delays in untracked cache testing
t/helper/test-chmtime: update mingw to support chmtime on directories
Fixes to the way generation number v2 in the commit-graph files are
(not) handled.
* ds/commit-graph-gen-v2-fixes:
commit-graph: declare bankruptcy on GDAT chunks
commit-graph: fix generation number v2 overflow values
commit-graph: start parsing generation v2 (again)
commit-graph: fix ordering bug in generation numbers
t5318: extract helpers to lib-commit-graph.sh
test-read-graph: include extra post-parse info
"git stash drop" is reimplemented as an internal call to
reflog_delete() function, instead of invoking "git reflog delete"
via run_command() API.
* jc/stash-drop:
stash: call reflog_delete() in reflog.c
reflog: libify delete reflog function and helpers
stash: add tests to ensure reflog --rewrite --updatref behavior
"git remote rename A B", depending on the number of remote-tracking
refs involved, takes long time renaming them. The command has been
taught to show progress bar while making the user wait.
* tb/rename-remote-progress:
builtin/remote.c: show progress when renaming remote references
builtin/remote.c: parse options in 'rename'
"git read-tree" has been made to be aware of the sparse-index
feature.
* vd/sparse-read-tree:
read-tree: make three-way merge sparse-aware
read-tree: make two-way merge sparse-aware
read-tree: narrow scope of index expansion for '--prefix'
read-tree: integrate with sparse index
read-tree: expand sparse checkout test coverage
read-tree: explicitly disallow prefixes with a leading '/'
status: fix nested sparse directory diff in sparse index
sparse-index: prevent repo root from becoming sparse
Object-file API shuffling.
* ab/object-file-api-updates:
object-file API: pass an enum to read_object_with_reference()
object-file.c: add a literal version of write_object_file_prepare()
object-file API: have hash_object_file() take "enum object_type"
object API: rename hash_object_file_literally() to write_*()
object-file API: split up and simplify check_object_signature()
object API users + docs: check <0, not !0 with check_object_signature()
object API docs: move check_object_signature() docs to cache.h
object API: correct "buf" v.s. "map" mismatch in *.c and *.h
object-file API: have write_object_file() take "enum object_type"
object-file API: add a format_object_header() function
object-file API: return "void", not "int" from hash_object_file()
object-file.c: split up declaration of unrelated variables
Various optimization for "git fetch".
* ps/fetch-mirror-optim:
refs/files-backend: optimize reading of symbolic refs
remote: read symbolic refs via `refs_read_symbolic_ref()`
refs: add ability for backends to special-case reading of symbolic refs
fetch: avoid lookup of commits when not appending to FETCH_HEAD
upload-pack: look up "want" lines via commit-graph
The untracked cache newly computed weren't written back to the
on-disk index file when there is no other change to the index,
which has been corrected.
* tk/empty-untracked-cache:
untracked-cache: write index when populating empty untracked cache
t7519: populate untracked cache before test
t7519: avoid file to index mtime race for untracked cache
When check_has_commit() is called on a missing submodule, initialization
of the struct repository fails, but it attempts to clear the struct
anyway (which is a fatal error). This bug is masked by its only caller,
submodule_has_commits(), first calling add_submodule_odb(). The latter
fails if the submodule does not exist, making submodule_has_commits()
exit early and not invoke check_has_commit().
Fix this bug, and because calling add_submodule_odb() is no longer
necessary as of 13a2f620b2 (submodule: pass repo to
check_has_commit(), 2021-10-08), remove that call too.
This is the last caller of add_submodule_odb(), so remove that
function. (Submodule ODBs are still added as alternates via
add_submodule_odb_by_path().)
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch --recurse-submodules" only considers populated
submodules (i.e. submodules that can be found by iterating the index),
which makes "git fetch" behave differently based on which commit is
checked out. As a result, even if the user has initialized all submodules
correctly, they may not fetch the necessary submodule commits, and
commands like "git checkout --recurse-submodules" might fail.
Teach "git fetch" to fetch cloned, changed submodules regardless of
whether they are populated. This is in addition to the current behavior
of fetching populated submodules (which is always attempted regardless
of what was fetched in the superproject, or even if nothing was fetched
in the superproject).
A submodule may be encountered multiple times (via the list of
populated submodules or via the list of changed submodules). When this
happens, "git fetch" only reads the 'populated copy' and ignores the
'changed copy'. Amend the verify_fetch_result() test helper so that we
can assert on which 'copy' is being read.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rearrange functions so that submodule_update() no longer needs to be
forward declared.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch completes the conversion past the flag parsing of
`submodule update` by introducing a helper subcommand called
`submodule--helper update`. The behaviour of `submodule update` should
remain the same after this patch.
Prior to this patch, `submodule update` was implemented by piping the
output of `update-clone` (which clones all missing submodules, then
prints relevant information for all submodules) into
`run-update-procedure` (which reads the information and updates the
submodule tree).
With `submodule--helper update`, we iterate over the submodules and
update the submodule tree in the same process. This reuses most of
existing code structure, except that `update_submodule()` now updates
the submodule tree (instead of printing submodule information to be
consumed by another process).
Recursing on a submodule is done by calling a subprocess that launches
`submodule--helper update`, with a modified `--recursive-prefix` and
`--prefix` parameter.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A later commit will combine the "update-clone" and
"run-update-procedure" commands, so run_update_procedure() will be
removed. Prepare for this by moving as much logic as possible out of
run_update_procedure() and into update_submodule2().
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor 'struct update_data' to hold the parsed args needed by "git
submodule--helper update" and refactor "update-clone" and
"run-update-procedure" (the functions that will be combined to form
"update") to use these options.
For "run-update-procedure", 'struct update_data' already holds its args,
so only arg parsing code needs to be updated.
For "update-clone", move its args from 'struct submodule_update_clone'
into 'struct update_data', and replace them with a pointer to 'struct
update_data'. Its other members hold the submodule iteration state of
"update-clone", so those are unchanged.
Incidentally, since we reformat the designated initializers of the
affected structs, also reformat MODULE_CLONE_DATA_INIT for consistency.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later commit, update_clone()'s options will be stored in a struct
update_data instead of submodule_update_clone. Preemptively rename the
options struct to "opt" to shrink that commit's diff.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use die_message() to print the "fatal: " prefix instead of doing it in
git-submodule.sh and remove a now-unnecessary exit code from "git
submodule--helper run-update-procedure".
Also, since die_message() adds the newline for us, replace an invocation
of die_with_status() with printf + exit invocations that do not add a
newline, but are otherwise identical to die_with_status().
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We switch to using the run-command API function that takes a
'struct child process', since we are using a lot of the options. This
will also make it simple to switch over to using 'capture_command()'
when we start handling the output of the command completely in C.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gc/submodule-update-part1:
submodule--helper update-clone: check for --filter and --init
submodule update: add tests for --filter
submodule--helper: remove ensure-core-worktree
submodule--helper update-clone: learn --init
submodule--helper: allow setting superprefix for init_submodule()
submodule--helper: refactor get_submodule_displaypath()
submodule--helper run-update-procedure: learn --remote
submodule--helper: don't use bitfield indirection for parse_options()
submodule--helper: get remote names from any repository
submodule--helper run-update-procedure: remove --suboid
submodule--helper: reorganize code for sh to C conversion
submodule--helper: remove update-module-mode
submodule tests: test for init and update failure output
If the user suspends git while it is waiting for a keypress reset the
terminal before stopping and restore the settings when git resumes. If
the user tries to resume in the background print an error
message (taking care to use async safe functions) before stopping
again. Ideally we would reprint the prompt for the user when git
resumes but this patch just restarts the read().
The signal handler is established with sigaction() rather than using
sigchain_push() as this allows us to control the signal mask when the
handler is invoked and ensure SA_RESTART is used to restart the
read() when resuming.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On macos the builtin "add -p" does not handle keys that generate
escape sequences because poll() does not work with terminals
there. Switch to using select() on non-windows platforms to work
around this.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_key_without_echo() reads from stdin but uses /dev/tty when it
disables echo. This is unfortunate as there no guarantee that stdin is
the same device as /dev/tty. The perl version of "add -p" uses stdin
when it sets the terminal mode, this commit does the same for the
builtin version. There is still a difference between the perl and
builtin versions though - the perl version will ignore any errors when
setting the terminal mode[1] and will still read single bytes when
stdin is not a terminal. The builtin version displays a warning if
setting the terminal mode fails and switches to reading a line at a
time.
[1] b061c913bb/ReadKey.xs (L1090)
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next commit will add another flag in addition to the existing
full_duplex so change the function signature to take a flags
argument. Also alter the functions that call save_term() so that they
can pass flags down to it.
The choice to use an enum for tho bitwise flags is because gdb will
display the symbolic names of all the flags that are set rather than
the integer value.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a blobless-cloned repo, `git log --follow -- <path>` (`<path>` have
an exact OID rename) shouldn't download blob of the file from where the
new file is renamed.
Add a test case to verify it.
Signed-off-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of creating a new allocation, reverse the original list
in-place by calling the reverse_commit_list() helper.
The original code discards the list "bases" after storing its
reverse copy in a newly created list "reversed". If the code that
followed from here used both "bases" and "reversed", the
modification would not have worked, but since the original list
"bases" gets discarded, we can simply reverse "bases" in-place with
the reverse_commit_list() helper and reuse the same variable in the
code that follows.
builtin/merge.c has been left unmodified, since in its case, the
original list is needed separately from its reverse copy by the
code.
Signed-off-by: Jayati Shrivastava <gaurijove@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If no --args are present after 'git restore', it assumes that you
want to tab-complete one of the files with unstaged uncommitted
changes.
If a file has been staged, we don't want to list it, as restoring those
requires a slightly more complex `git restore --staged`, so we only list
those files that are --modified. While --committable also looks like
a good candidate, that includes changes that have been staged.
Signed-off-by: David Cantrell <david@cantrell.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing both loose and packed references to disk we first create a
lockfile, write the updated values into that lockfile, and on commit we
rename the file into place. According to filesystem developers, this
behaviour is broken because applications should always sync data to disk
before doing the final rename to ensure data consistency [1][2][3]. If
applications fail to do this correctly, a hard crash of the machine can
easily result in corrupted on-disk data.
This kind of corruption can in fact be easily observed with Git when the
machine hard-resets shortly after writing references to disk. On
machines with ext4, this will likely lead to the "empty files" problem:
the file has been renamed, but its data has not been synced to disk. The
result is that the reference is corrupt, and in the worst case this can
lead to data loss.
Implement a new option to harden references so that users and admins can
avoid this scenario by syncing locked loose and packed references to
disk before we rename them into place.
[1]: https://thunk.org/tytso/blog/2009/03/15/dont-fear-the-fsync/
[2]: https://btrfs.wiki.kernel.org/index.php/FAQ (What are the crash guarantees of overwrite-by-rename)
[3]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/admin-guide/ext4.rst (see auto_da_alloc)
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ns/core-fsyncmethod:
core.fsync: documentation and user-friendly aggregate options
core.fsync: new option to harden the index
core.fsync: add configuration parsing
core.fsync: introduce granular fsync control infrastructure
core.fsyncmethod: add writeout-only mode
wrapper: make inclusion of Windows csprng header tightly scoped
This commit adds aggregate options for the core.fsync setting that are
more user-friendly. These options are specified in terms of 'levels of
safety', indicating which Git operations are considered to be sync
points for durability.
The new documentation is also included here in its entirety for ease of
review.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The synopsis for 'git maintenance' did not include the commands other
than the 'run' command. Update this to include the others. The 'start'
command is the only one of these that parses additional options, and
then only the --scheduler option.
Also move the 'register' command down after 'stop' and before
'unregister' for a logical grouping of the commands instead of an
alphabetical one. The diff makes it look as three other commands are
moved up.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When format is passed into --batch, --batch-check, --batch-command,
the format gets expanded. When nothing is passed in, the default format
is set and the expand_format() gets called.
We can save on these cycles by hardcoding how to print the
information when nothing is passed as the format, or when the default
format is passed. There is no need for the fully expanded format with
the default. Since batch_object_write() happens on every object provided
in batch mode, we get a nice performance improvement.
git rev-list --all > /tmp/all-obj.txt
git cat-file --batch-check </tmp/all-obj.txt
with HEAD^:
Time (mean ± σ): 57.6 ms ± 1.7 ms [User: 51.5 ms, System: 6.2 ms]
Range (min … max): 54.6 ms … 64.7 ms 50 runs
with HEAD:
Time (mean ± σ): 49.8 ms ± 1.7 ms [User: 42.6 ms, System: 7.3 ms]
Range (min … max): 46.9 ms … 55.9 ms 56 runs
If nothing is provided as a format argument, or if the default format is
passed, skip expanding of the format and print the object info with a
default format.
See https://lore.kernel.org/git/87eecf8ork.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the options '-q' and '--refresh' to the 'git reset' executed in
'reset_head()', and '--refresh' to the 'git reset -q' executed in
'do_push_stash(...)'.
'stash' is implemented such that git commands invoked as part of it (e.g.,
'clean', 'read-tree', 'reset', etc.) have their informational output
silenced. However, the 'reset' in 'reset_head()' is *not* called with '-q',
leading to the potential for a misleading printout from 'git stash apply
--index' if the stash included a removed file:
Unstaged changes after reset: D <deleted file>
Not only is this confusing in its own right (since, after the reset, 'git
stash' execution would stage the deletion in the index), it would be printed
even when the stash was applied with the '-q' option. As a result, the
messaging is removed entirely by calling 'git status' with '-q'.
Additionally, because the default behavior of 'git reset -q' is to skip
refreshing the index, but later operations in 'git stash' subcommands expect
a non-stale index, enable '--refresh' as well.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If using '--quiet' or 'reset.quiet=true', do not print the 'resetnoRefresh'
advice string. For applications that rely on '--quiet' disabling all
non-error logs, the advice message should be suppressed accordingly.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace references to '--quiet' with '--no-refresh' in the advice on how to
skip refreshing the index. When the advice was introduced, '--quiet' was the
only way to avoid the expensive 'refresh_index(...)' at the end of a mixed
reset. After introducing '--no-refresh', however, '--quiet' became only a
fallback option for determining refresh behavior, overridden by
'--[no-]refresh' or 'reset.refresh' if either is set. To ensure users are
advised to use the most reliable option for avoiding 'refresh_index(...)',
replace recommendation of '--quiet' with '--[no-]refresh'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new --[no-]refresh option that is intended to explicitly determine
whether a mixed reset should end in an index refresh.
Starting at 9ac8125d1a (reset: don't compute unstaged changes after reset
when --quiet, 2018-10-23), using the '--quiet' option results in skipping
the call to 'refresh_index(...)' at the end of a mixed reset with the goal
of improving performance. However, by coupling behavior that modifies the
index with the option that silences logs, there is no way for users to have
one without the other (i.e., silenced logs with a refreshed index) without
incurring the overhead of a separate call to 'git update-index --refresh'.
Furthermore, there is minimal user-facing documentation indicating that
--quiet skips the index refresh, potentially leading to unexpected issues
executing commands after 'git reset --quiet' that do not themselves refresh
the index (e.g., internals of 'git stash', 'git read-tree').
To mitigate these issues, '--[no-]refresh' and 'reset.refresh' are
introduced to provide a dedicated mechanism for refreshing the index. When
either is set, '--quiet' and 'reset.quiet' revert to controlling only
whether logs are silenced and do not affect index refresh.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the advice describing index refresh from "enumerate unstaged changes"
to "refresh the index." Describing 'refresh_index(...)' as "enumerating
unstaged changes" is not fully representative of what an index refresh is
doing; more generally, it updates the properties of index entries that are
affected by outside-of-index state, e.g. CE_UPTODATE, which is affected by
the file contents on-disk. This distinction is relevant to operations that
read the index but do not refresh first - e.g., 'git read-tree' - where a
stale index may cause incorrect behavior.
In addition to changing the advice message, use the "advise" function to
print advice.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, git-repack(1) will update server info that is required by
the dumb HTTP transport. This can be skipped by passing the `-n` flag,
but what we're noticably missing is a config option to permanently
disable updating this information.
Add a new option "repack.updateServerInfo" which can be used to disable
the logic. Most hosting providers have turned off the dumb HTTP protocol
anyway, and on the client-side it woudln't typically be useful either.
Giving a persistent way to disable this feature thus makes quite some
sense to avoid wasting compute cycles and storage.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, git-repack(1) runs `update_server_info()` to generate info
required for the dumb HTTP protocol. This can be disabled via the `-n`
flag, which then sets the `no_update_server_info` flag. Further down the
code this leads to some double-negation logic, which is about to become
more confusing as we're about to add a new config which allows the user
to permanently disable generation of the info.
Refactor the code to avoid the double-negation and add some tests which
verify that the flag continues to work as expected.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug random memory leaks.
* ab/plug-random-leaks:
repository.c: free the "path cache" in repo_clear()
range-diff: plug memory leak in read_patches()
range-diff: plug memory leak in common invocation
lockfile API users: simplify and don't leak "path"
commit-graph: stop fill_oids_from_packs() progress on error and free()
commit-graph: fix memory leak in misused string_list API
submodule--helper: fix trivial leak in module_add()
transport: stop needlessly copying bundle header references
bundle: call strvec_clear() on allocated strvec
remote-curl.c: free memory in cmd_main()
urlmatch.c: add and use a *_release() function
diff.c: free "buf" in diff_words_flush()
merge-base: free() allocated "struct commit **" list
index-pack: fix memory leaks
Newer version of GPGSM changed its output in a backward
incompatible way to break our code that parses its output. It also
added more processes our tests need to kill when cleaning up.
Adjustments have been made to accommodate these changes.
* fs/gpgsm-update:
t/lib-gpg: kill all gpg components, not just gpg-agent
t/lib-gpg: reload gpg components after updating trustlist
gpg-interface/gpgsm: fix for v2.3
Check the return value from parse_tree_indirect() to turn segfaults
into calls to die().
* gc/parse-tree-indirect-errors:
checkout, clone: die if tree cannot be parsed
Align the level of verbose output from the ort backend during inner
merge to that of the recursive backend.
* en/merge-ort-align-verbosity-with-recursive:
merge-ort: exclude messages from inner merges by default
Makefile refactoring with a bit of suffixes rule stripping to
optimize the runtime overhead.
* ab/make-optim-noop:
Makefiles: add and use wildcard "mkdir -p" template
Makefile: add "$(QUIET)" boilerplate to shared.mak
Makefile: move $(comma), $(empty) and $(space) to shared.mak
Makefile: move ".SUFFIXES" rule to shared.mak
Makefile: define $(LIB_H) in terms of $(FIND_SOURCE_FILES)
Makefile: disable GNU make built-in wildcard rules
Makefiles: add "shared.mak", move ".DELETE_ON_ERROR" to it
scalar Makefile: use "The default target of..." pattern
"git fetch" can make two separate fetches, but ref updates coming
from them were in two separate ref transactions under "--atomic",
which has been corrected.
* ps/fetch-atomic:
fetch: make `--atomic` flag cover pruning of refs
fetch: make `--atomic` flag cover backfilling of tags
refs: add interface to iterate over queued transactional updates
fetch: report errors when backfilling tags fails
fetch: control lifecycle of FETCH_HEAD in a single place
fetch: backfill tags before setting upstream
fetch: increase test coverage of fetches
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
shellcheck -i SC2006 -f diff ${_f} | ifne git apply -p2
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a commit in a sequence of linear history has a non-monotonically
increasing commit timestamp, git name-rev might not properly name the
commit.
This occurs because name-rev uses a heuristic of the commit date to
avoid searching down tags which lead to commits that are older than the
named commit. This is intended to avoid work on larger repositories.
This heuristic impacts git name-rev, and by extension git describe
--contains which is built on top of name-rev.
Further more, if --all or --annotate-stdin is used, the heuristic is not
enabled because the full history has to be analyzed anyways. This
results in some confusion if a user sees that --annotate-stdin works but
a normal name-rev does not.
If the repository has a commit graph, we can use the generation numbers
instead of using the commit dates. This is essentially the same check
except that generation numbers make it exact, where the commit date
heuristic could be incorrect due to clock errors.
Since we're extending the notion of cutoff to more than one variable,
create a series of functions for setting and checking the cutoff. This
avoids duplication and moves access of the global cutoff and
generation_cutoff to as few functions as possible.
Add several test cases including a test that covers the new commitGraph
behavior, as well as tests for --all and --annotate-stdin with and
without commitGraphs.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in my daf1d8285e (reflog expire: don't use
lookup_commit_reference_gently(), 2021-12-22), in changing from
lookup_commit_reference_gently() to lookup_commit() we stopped trying
to call deref_tag() and parse_object() on the provided OID, but we
also started returning non-NULL for the null_oid().
As a result we'd emit an error() via mark_reachable() later in this
function as we tried to invoke parse_commit() on it.
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Tested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The xfuncname pattern finds func/class declarations
in diffs to display as a hunk header. The word_regex
pattern finds individual tokens in Kotlin code to generate
appropriate diffs.
This patch adds xfuncname regex and word_regex for Kotlin
language.
Signed-off-by: Jaydeep P Das <jaydeepjd.8914@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pipes ignore error codes of LHS command and thus we should not use
them with Git in tests. As an alternative, use a 'tmp' file to write
the Git output so we can test the exit code.
Signed-off-by: Shubham Mishra <shivam828787@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pipes ignore error codes of LHS command and thus we should not use
them with Git in tests. As an alternative, use a 'tmp' file to write
the Git output so we can test the exit code.
Signed-off-by: Shubham Mishra <shivam828787@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces the new ability for the user to harden
the index. In the event of a system crash, the index must be
durable for the user to actually find a file that has been added
to the repo and then deleted from the working tree.
We use the presence of the COMMIT_LOCK flag and absence of the
alternate_index_output as a proxy for determining whether we're
updating the persistent index of the repo or some temporary
index. We don't sync these temporary indexes.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change introduces code to parse the core.fsync setting and
configure the fsync_components variable.
core.fsync is configured as a comma-separated list of component names to
sync. Each time a core.fsync variable is encountered in the
configuration heirarchy, we start off with a clean state with the
platform default value. Passing 'none' resets the value to indicate
nothing will be synced. We gather all negative and positive entries from
the comma separated list and then compute the new value by removing all
the negative entries and adding all of the positive entries.
We issue a warning for components that are not recognized so that the
configuration code is compatible with configs from future versions of
Git with more repo components.
Complete documentation for the new setting is included in a later patch
in the series so that it can be reviewed once in final form.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces the infrastructure for the core.fsync
configuration knob. The repository components we want to sync
are identified by flags so that we can turn on or off syncing
for specific components.
If core.fsyncObjectFiles is set and the core.fsync configuration
also includes FSYNC_COMPONENT_LOOSE_OBJECT, we will fsync any
loose objects. This picks the strictest data integrity behavior
if core.fsync and core.fsyncObjectFiles are set to conflicting values.
This change introduces the currently unused fsync_component
helper, which will be used by a later patch that adds fsyncing to
the refs backend.
Actual configuration and documentation of the fsync components
list are in other patches in the series to separate review of
the underlying mechanism from the policy of how it's configured.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces the `core.fsyncMethod` configuration
knob, which can currently be set to `fsync` or `writeout-only`.
The new writeout-only mode attempts to tell the operating system to
flush its in-memory page cache to the storage hardware without issuing a
CACHE_FLUSH command to the storage controller.
Writeout-only fsync is significantly faster than a vanilla fsync on
common hardware, since data is written to a disk-side cache rather than
all the way to a durable medium. Later changes in this patch series will
take advantage of this primitive to implement batching of hardware
flushes.
When git_fsync is called with FSYNC_WRITEOUT_ONLY, it may fail and the
caller is expected to do an ordinary fsync as needed.
On Apple platforms, the fsync system call does not issue a CACHE_FLUSH
directive to the storage controller. This change updates fsync to do
fcntl(F_FULLFSYNC) to make fsync actually durable. We maintain parity
with existing behavior on Apple platforms by setting the default value
of the new core.fsyncMethod option.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Including NTSecAPI.h in git-compat-util.h causes build errors in any
other file that includes winternl.h. NTSecAPI.h was included in order to
get access to the RtlGenRandom cryptographically secure PRNG. This
change scopes the inclusion of ntsecapi.h to wrapper.c, which is the only
place that it's actually needed.
The build breakage is due to the definition of UNICODE_STRING in
NtSecApi.h:
#ifndef _NTDEF_
typedef LSA_UNICODE_STRING UNICODE_STRING, *PUNICODE_STRING;
typedef LSA_STRING STRING, *PSTRING ;
#endif
LsaLookup.h:
typedef struct _LSA_UNICODE_STRING {
USHORT Length;
USHORT MaximumLength;
#ifdef MIDL_PASS
[size_is(MaximumLength/2), length_is(Length/2)]
#endif // MIDL_PASS
PWSTR Buffer;
} LSA_UNICODE_STRING, *PLSA_UNICODE_STRING;
winternl.h also defines UNICODE_STRING:
typedef struct _UNICODE_STRING {
USHORT Length;
USHORT MaximumLength;
PWSTR Buffer;
} UNICODE_STRING;
typedef UNICODE_STRING *PUNICODE_STRING;
Both definitions have equivalent layouts. Apparently these internal
Windows headers aren't designed to be included together. This is
an oversight in the headers and does not represent an incompatibility
between the APIs.
Signed-off-by: Neeraj Singh <neerajsi@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the block SHA-1 code, we have special assembly code for i386 and
amd64 to perform rotations with assembly. This is supposed to help pick
the correct rotation operation depending on which rotation is smaller,
which can help some systems perform slightly better, since any circular
rotation can be specified as either a rotate left or a rotate right.
However, this isn't needed, so we should remove it.
First, SHA-1, like SHA-2, uses fixed constant rotates. Thus, all
rotation amounts are known at compile time and are in fact baked into
the code. Fortunately, peephole optimizers recognize rotations
specified in the normal way and automatically emit the correct code,
including a preference for choosing a rotate left versus a rotate right.
This has been the case for well over a decade, and is a standard example
of the utility of a peephole optimizer.
Moreover, all modern CPUs, with the exception of extremely limited
embedded CPUs such as some Cortex-M processors, provide a barrel
shifter, which lets the CPU perform rotates of any bit amount in
constant time. This is valuable for many cryptographic algorithms to
improve performance, and is required to prevent timing attacks in
algorithms which use data-dependent rotations (which don't include the
hash algorithms we use). As a result, even though the compiler does the
correct optimization, it isn't even needed here and either a left or a
right rotate is equally acceptable.
In fact, the SHA-256 code already takes this into account and just
writes the simple code using an inline function to let the compiler
optimize it for us.
The downside of using this code, however, is that it uses a GCC
extension, which makes the compiler complain when using -pedantic unless
it's prefixed with __extension__. We could fix that, but since it's
not needed, let's just remove it. We haven't noticed this because
almost everyone uses the SHA1DC code instead, but it still shows up for
some people.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* pw/single-key-interactive:
add -p: disable stdin buffering when interactive.singlekey is set
terminal: set VMIN and VTIME in non-canonical mode
terminal: pop signal handler when terminal is restored
terminal: always reset terminal when reading without echo
131b94a10a ("test-lib.sh: Use GLIBC_TUNABLES instead of MALLOC_CHECK_ on
glibc >= 2.34", 2022-03-04) introduced "local" variables without
declaring them as such. This conflicts with their use in some tests (at
least when running them with dash), leading to test failures in:
t0006-date.sh
t2002-checkout-cache-u.sh
t3430-rebase-merges.sh
t4138-apply-ws-expansion.sh
t4124-apply-ws-rule.sh
Declare those variables as local to let the tests pass again.
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updates to how command line options to "git help" are handled.
* ab/help-fixes:
help: don't print "\n" before single-section output
help: add --no-[external-commands|aliases] for use with --all
help: error if [-a|-g|-c] and [-i|-m|-w] are combined
help: correct usage & behavior of "git help --all"
help: note the option name on option incompatibility
help.c: split up list_all_cmds_help() function
help tests: test "git" and "git help [-a|-g] spacing
help.c: use puts() instead of printf{,_ln}() for consistency
help doc: add missing "]" to "[-a|--all]"
Remove the escape hatch we added when we introduced the weather
balloon to use variadic macros unconditionally, to make it official
that we now have a hard dependency on the feature.
* ab/c99-variadic-macros:
C99: remove hardcoded-out !HAVE_VARIADIC_MACROS code
git-compat-util.h: clarify GCC v.s. C99-specific in comment
General clean-up in reftable implementation, including
clarification of the API documentation, tightening the code to
honor documented length limit, etc.
* hn/reftable-no-empty-keys:
reftable: rename writer_stats to reftable_writer_stats
reftable: add test for length of disambiguating prefix
reftable: ensure that obj_id_len is >= 2 on writing
reftable: avoid writing empty keys at the block layer
reftable: add a test that verifies that writing empty keys fails
reftable: reject 0 object_id_len
Documentation: object_id_len goes up to 31
"git cat-file" learns "--batch-command" mode, which is a more
flexible interface than the existing "--batch" or "--batch-check"
modes, to allow different kinds of inquiries made.
* jc/cat-file-batch-commands:
cat-file: add --batch-command mode
cat-file: add remove_timestamp helper
cat-file: introduce batch_mode enum to replace print_contents
cat-file: rename cmdmode to transform_mode
Improve failure case behaviour of xdiff library when memory
allocation fails.
* pw/xdiff-alloc-fail:
xdiff: handle allocation failure when merging
xdiff: refactor a function
xdiff: handle allocation failure in patience diff
xdiff: fix a memory leak
In sparse-checkouts, files mis-marked as missing from the working tree
could lead to later problems. Such files were hard to discover, and
harder to correct. Automatically detecting and correcting the marking
of such files has been added to avoid these problems.
* en/present-despite-skipped:
repo_read_index: add config to expect files outside sparse patterns
Accelerate clear_skip_worktree_from_present_files() by caching
Update documentation related to sparsity and the skip-worktree bit
repo_read_index: clear SKIP_WORKTREE bit from files present in worktree
unpack-trees: fix accidental loss of user changes
t1011: add testcase demonstrating accidental loss of user modifications
Users can create a new repository using 'git clone <bundle-file>'. The
new "@filter" capability for bundles means that we can generate a bundle
that does not contain all reachable objects, even if the header has no
negative commit OIDs.
It is feasible to think that we could make a filtered bundle work with
the command
git clone --filter=$filter --bare <bundle-file>
or possibly replacing --bare with --no-checkout. However, this requires
having some repository-global config that specifies the specified object
filter and notifies Git about the existence of promisor pack-files.
Without a remote, that is currently impossible.
As a stop-gap, parse the bundle header during 'git clone' and die() with
a helpful error message instead of the current behavior of failing due
to "missing objects".
Most of the existing logic for handling bundle clones actually happens
in fetch-pack.c, but that logic is the same as if the user specified
'git fetch <bundle>', so we want to avoid failing to fetch a filtered
bundle when in an existing repository that has the proper config set up
for at least one remote.
Carefully comment around the test that this is not the desired long-term
behavior of 'git clone' in this case, but instead that we need to do
more work before that is possible.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to have a valid pack-file after unbundling a bundle that has
the 'filter' capability, we need to generate a .promisor file. The
bundle does not promise _where_ the objects can be found, but we can
expect that these bundles will be unbundled in repositories with
appropriate promisor remotes that can find those missing objects.
Use the 'git index-pack --promisor=<message>' option to create this
.promisor file. Add "from-bundle" as the message to help anyone diagnose
issues with these promisor packs.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous change allowed Git to parse bundles with the 'filter'
capability. Now, teach Git to create bundles with this option.
Some rearranging of code is required to get the option parsing in the
correct spot. There are now two reasons why we might need capabilities
(a new hash algorithm or an object filter) so that is pulled out into a
place where we can check both at the same time.
The --filter option is parsed as part of setup_revisions(), but it
expected the --objects flag, too. That flag is somewhat implied by 'git
bundle' because it creates a pack-file walking objects, but there is
also a walk that walks the revision range expecting only commits. Make
this parsing work by setting 'revs.tree_objects' and 'revs.blob_objects'
before the call to setup_revisions().
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that 'struct rev_info' has a 'filter' member and most consumers of
object filtering are using that member instead of an external struct,
move the parsing of the '--filter' option out of builtin/rev-list.c and
into revision.c.
This use within handle_revision_pseudo_opt() allows us to find the
option within setup_revisions() if the arguments are passed directly. In
the case of a command such as 'git blame', the arguments are first
scanned and checked with parse_revision_opt(), which complains about the
option, so 'git blame --filter=blob:none <file>' does not become valid
with this change.
Some commands, such as 'git diff' gain this option without having it
make an effect. And 'git diff --objects' was already possible, but does
not actually make sense in that builtin.
The key addition that is coming is 'git bundle create --filter=<X>' so
we can create bundles containing promisor packs. More work is required
to make them fully functional, but that will follow.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The v3 bundle format has capabilities, allowing newer versions of Git to
create bundles with newer features. Older versions that do not
understand these new capabilities will fail with a helpful warning.
Create a new capability allowing Git to understand that the contained
pack-file is filtered according to some object filter. Typically, this
filter will be "blob:none" for a blobless partial clone.
This change teaches Git to parse this capability, place its value in the
bundle header, and demonstrate this understanding by adding a message to
'git bundle verify'.
Since we will use gently_parse_list_objects_filter() outside of
list-objects-filter-options.c, make it an external method and move its
API documentation to before its declaration.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a caller to traverse_commit_list() specifies the options for the
--objects flag but does not specify a show_object function pointer, the
result is a segfault. This is currently visible by running 'git bundle
create --objects HEAD'.
We could fix this problem by supplying a no-op callback in
builtin/bundle.c, but that only solves the problem for one builtin,
leaving this segfault open for other callers.
Replace all callers of the show_commit and show_object function pointers
in list-objects.c to call helper functions show_commit() and
show_object() which check that the given context has non-NULL functions
before passing the necessary data. One extra benefit is that it reduces
duplication due to passing ctx->show_data to every caller.
Test that this segfault no longer occurs for 'git bundle'.
Co-authored-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change consolidated traverse_commit_list() and
traverse_commit_list_filtered(). This allows us to simplify the
recommended usage in MyFirstObjectWalk.txt to use this new set of
values.
While here, add some clarification on the difference between the two
methods.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that all consumers of traverse_commit_list_filtered() populate the
'filter' member of 'struct rev_info', we can drop that parameter from
the method prototype to simplify things. In addition, the only thing
different now between traverse_commit_list_filtered() and
traverse_commit_list() is the presence of the 'omitted' parameter, which
is only non-NULL for one caller. We can consolidate these two methods by
having one call the other and use the simpler form everywhere the
'omitted' parameter would be NULL.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that all consumers of prepare_bitmap_walk() have populated the
'filter' member of 'struct rev_info', we can drop that extra parameter
from the method and access it directly from the 'struct rev_info'.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In builtin/pack-objects.c, we use a 'filter_options' global to populate
the --filter=<X> argument. The previous change created a pointer to a
filter option in 'struct rev_info', so we can use that pointer here as a
start to simplifying some usage of object filters.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Placing a 'struct list_objects_filter_options' within 'struct rev_info'
will assist making some bookkeeping around object filters in the future.
For now, let's use this new member to remove a static global instance of
the struct from builtin/rev-list.c.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we add more embedded members with type 'struct
list_objects_filter_options', it will be important to easily perform a
deep copy across multiple such structs. Create
list_objects_filter_copy() to satisfy this need.
This method is recursive to match the recursive nature of the struct.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --promisor option of 'git index-pack' was created in 88e2f9e
(introduce fetch-object: fetch one promisor object, 2017-12-05) but was
untested. It is currently unused within the Git codebase, but that will
change in an upcoming change to 'git bundle unbundle' when there is a
filter capability.
For now, add documentation about the option and add a test to ensure it
is working as expected.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this change, gitweb would generate pages which included:
<meta http-equiv="content-type" content="application/xhtml+xml; charset=utf-8"/>
When a meta's http-equiv equals "content-type", the http-equiv is said
to be in the "Encoding declaration state". According to the HTML
Standard,
The Encoding declaration state may be used in HTML documents,
but elements with an http-equiv attribute in that state must not
be used in XML documents.
Source: <https://html.spec.whatwg.org/multipage/semantics.html#attr-meta-http-equiv-content-type>
This change removes that meta element since gitweb always generates XML
documents.
Signed-off-by: Jason Yundt <jason@jasonyundt.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_fetch_task() gets a fetch task by iterating the index; a future
commit will introduce a similar function, get_fetch_task_from_changed(),
that gets a fetch task from the list of changed submodules. Both
functions are similar in that they need to:
* create a fetch task
* initialize the submodule repo for the fetch task
* determine the default recursion mode
Move all of this logic into fetch_task_create() so that it is no longer
split between fetch_task_create() and get_fetch_task(). This will make
it easier to share code with get_fetch_task_from_changed().
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_next_submodule() configures the parallel submodule fetch by
performing two functions:
* iterate the index to find submodules
* configure the child processes to fetch the submodules found in the
previous step
Extract the index iterating code into an iterator function,
get_fetch_task(), so that get_next_submodule() is agnostic of how
to find submodules. This prepares for a subsequent commit will teach the
fetch machinery to also iterate through the list of changed
submodules (in addition to the index).
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit prepares for a future commit that will teach `git fetch
--recurse-submodules` how to fetch submodules that are present in
<gitdir>/modules, but are not populated. To do this, we need to store
more information about the changed submodule so that we can read the
submodule configuration from the superproject commit instead of the
filesystem.
Refactor the changed submodules string_list.util to hold a struct
instead of an oid_array. This struct only holds the new_commits
oid_array for now; more information will be added later.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When collecting the string_list of changed submodule names, the new
submodules commits are stored in the string_list_item.util as an
oid_array. A subsequent commit will replace the oid_array with a struct
that has more information.
Prepare for this change by inlining submodule_commits() (which inserts
into the string_list and initializes the string_list_item.util) into its
only caller so that the code is easier to refactor later.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future commit will teach "fetch --recurse-submodules" to fetch
unpopulated submodules. To prepare for this, teach the necessary static
functions how to read submodules from superproject commits using a
"treeish_name" argument (instead of always reading from the index and
filesystem) but do not actually change where submodules are read from.
Submodules will be read from commits when we fetch unpopulated
submodules.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few tests in t5526 use this pattern as part of their setup:
1. Create new commits in the upstream submodules (using
add_upstream_commit()).
2. In the upstream superprojects, add the new submodule commits from the
previous step.
A future commit will add more tests with this pattern, so reduce the
verbosity of present and future tests by introducing a test helper that
creates superproject commits. Since we now have two helpers that add
upstream commits, rename add_upstream_commit() to
add_submodule_commits().
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit message, we noted that not all of the "git fetch"
stderr is relevant to the tests. Most of the test setup lines are
dedicated to these details of the stderr:
1. which repos (super/sub/deep) are involved in the fetch
2. the head of the remote-tracking branch before the fetch (i.e. $head1)
3. the head of the remote-tracking branch after the fetch (i.e. $head2)
1. and 3. are relevant because they tell us that the expected commit is
fetched by the expected repo, but 2. is completely irrelevant.
Stop asserting on $head1 by replacing it with a dummy value in the
actual and expected output. Do this by introducing test
helpers (write_expected_*()) that make it easier to construct the
expected output, and use sed to munge the actual output.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests in t/t5526-fetch-submodules.sh are unnecessarily noisy:
* The tests have extra logic in order to reproduce the expected stderr
literally, but not all of these details (e.g. the head of the
remote-tracking branch before the fetch) are relevant to the test.
* The expect.err file is constructed by the add_upstream_commit() helper
as input into test_cmp, but most tests fetch a different combination
of repos from expect.err. This results in noisy tests that modify
parts of that expect.err to generate the expected output.
To address both of these issues, introduce a verify_fetch_result()
helper to t/t5526-fetch-submodules.sh that asserts on the output of "git
fetch --recurse-submodules" and handles the ordering of expect.err.
As a result, the tests no longer construct expect.err manually. Tests
still consider the old head of the remote-tracking branch ("$head1"),
but that will be fixed in a later commit.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a fragile test pattern introduced in 6534703059 (Topo-sort
before --simplify-merges, 2008-08-03) to check the exit code of both
"git name-rev" and "git log".
This test as a whole would fail under SANITIZE=leak, but we'd pass
several "failing" tests due to hiding these exit codes before we'd
spot git dying with abort(). Now we'll instead spot all of the
failures.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a fragile pattern introduced in 696acf45f9 (checkout:
implement "-" abbreviation, add docs and tests, 2009-01-17) to check
the exit code of both "git symbolic-ref" and "git rev-parse".
Without this change this test will become flaky e.g. under
SANITIZE=leak if some (but not all) memory leaks revealed by these
commands are fixed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix code added in 969c877506 (git apply --directory broken for new
files, 2008-10-12) so that it doesn't invoke "git ls-files" on the
left-hand-side of a pipe, instead let's use an intermediate file.
Since we're doing that we can also drop the sub-shell that was here to
group the two.
There are a lot of these sorts of patterns in the test suite, and
there's no particular reason to fix this one other than in a preceding
commit all similar patterns except this one were fixed in
"t/t4128-apply-root.sh", so let's fix this one straggler as well.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend a prerequisite check added in 5c1ebcca4d (grep/icase: avoid
kwsset on literal non-ascii strings, 2016-06-25) to do invoke
'test-tool regex' in such a way that we'll notice if it dies under
SANITIZE=leak due to having a memory leak, as opposed to us not having
the "ICASE" support we're checking for.
Because we weren't making a distinction between the two I'd marked
these tests as passing under SANITIZE=leak in 03d85e21951 (leak tests:
mark remaining leak-free tests as such, 2021-12-17).
Doing this is tricky. Ideally "test_lazy_prereq" would materialize as
a "real" test that we could check the exit code of with the same
signal matching that "test_must_fail" does.
However lazy prerequisites aren't real tests, and are instead lazily
materialized in the guts of "test_have_prereq" when we've already
started another test.
We could detect the abort() (or similar) there and pass that exit code
down, and fail the test that caused the prerequisites to be
materialized.
But that would require extensive changes to test-lib.sh and
test-lib-functions.sh. Let's instead simply check if the exit code of
"test-tool regex" is zero, and if so set the prerequisites. If it's
non-zero let's run it again with "test_must_fail". We'll thus make a
distinction between "bad" non-zero (segv etc) and "good" (exit 1 etc.).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a couple of uses of "test_expect_failure" to use a
"test_expect_success" to positively assert the current behavior, and
replace the intent of "test_expect_failure" with a "TODO" comment int
the description.
As noted in [1] the "test_expect_failure" feature is overly eager to
accept any failure as OK, and thus by design hides segfaults, abort()
etc. Because of that I didn't notice in dd9cede913 (leak tests: mark
some rev-list tests as passing with SANITIZE=leak, 2021-10-31) that
this test leaks memory under SANITIZE=leak.
I have some larger local changes to add a better
"test_expect_failure", which would work just like
"test_expect_success", but would allow us say "test_todo" here (and
"success" would emit a "not ok [...] # TODO", not "ok [...]".
So even though using "test_expect_success" here comes with its own
problems[2], let's use it as a narrow change to fix the problem at
hand here and stop conflating the current "success" with actual
SANITIZE=leak failures.
1. https://lore.kernel.org/git/87tuhmk19c.fsf@evledraar.gmail.com/
2. https://lore.kernel.org/git/xmqq4k9kj15p.fsf@gitster.g/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a fragile pattern introduced in 2b459b483c (diff: make sure
work tree side is shown as 0{40} when different, 2008-03-02) to check
the exit code of "git rev-list", while we're at it let's get rid of
the needless sub-shell for invoking it in favor of the "-C" option.
Because of this I'd marked these tests as passing under SANITIZE=leak
in 16d4bd4f14 (leak tests: mark some diff tests as passing with
SANITIZE=leak, 2021-10-31), let's remove the
"TEST_PASSES_SANITIZE_LEAK=true" annotation as they no longer do.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a fragile test pattern that's been with us ever since these
tests were introduced in [1], [2] and [3] to properly return the exit
code of the failing command on failure.
Because of this I'd marked this test as passing under SANITIZE=leak in
[4] and [5]. We need to remove those annotations as these tests will
no longer pass.
1. 9081a421a6 (checkout: fix "branch info" memory leaks, 2021-11-16)
2. 0057c0917d (Add selftests verifying that we can parse notes trees
with various fanouts, 2009-10-09)
3. 048cdd4665 (t3305: Verify that adding many notes with git-notes
triggers increased fanout, 2010-02-13)
4. ca08972495 (leak tests: mark some notes tests as passing with
SANITIZE=leak, 2021-10-31)
5. 9081a421a6 (checkout: fix "branch info" memory leaks, 2021-11-16)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend a test added in 9c46c054ae (rev-parse: tests git rev-parse
--verify master@{n}, for various n, 2010-08-24) so that we'll stop
ignoring the exit code of "git reflog" by having it on the
left-hand-side of a pipe.
Because of this I'd marked this test as passing under SANITIZE=leak in
f442c94638 (leak tests: mark some rev-parse tests as passing with
SANITIZE=leak, 2021-10-31). As all of it except this specific test
will now pass, let's skip it under the !SANITIZE_LEAK prerequisite.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As in the preceding commit change a similar fragile test pattern
introduced in b798671fa9 (merge-recursive: do not rudely die on
binary merge, 2007-08-14) to use a "test_must_fail" instead.
Before this we wouldn't distinguish normal "git merge" failures from
segfaults or abort(). Unlike the preceding commit we didn't end up
hiding any SANITIZE=leak failures in this case, but let's
correspondingly change these anyway.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a fragile test pattern introduced in 6b763c424e (git-apply: do
not read past the end of buffer, 2007-09-05). Before this we wouldn't
distinguish normal "git apply" failures from segfaults or abort().
I'd previously marked this test as passing under SANITIZE=leak in
f54f48fc07 (leak tests: mark some apply tests as passing with
SANITIZE=leak, 2021-10-31). Let's remove that annotation as this test
will no longer pass.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a test pattern that originated in f1af60bdba (Support 'diff=pgm'
attribute, 2007-04-22) so that we'll stop using "git diff" on the
left-hand-side of a pipe, and thus ignoring its exit code.
Rather than use intermediate files let's rewrite these tests to a much
simpler but more exhaustive "test_tmp" where we'll ignore certain
fields in the output.
Note that this is not a faithful conversion of the previous
"read/test" in some cases, as we were ignoring more fields there than
we strictly needed to. Now we'll "test_cmp" everything we can, and
only ignore the likes of paths to $TEMPDIR etc.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a test pattern that originated in f1af60bdba (Support 'diff=pgm'
attribute, 2007-04-22) so that we'll stop using "git diff" on the
left-hand-side of a pipe, and thus ignoring its exit code.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix an issue with the exit code of "diff-files" being ignored, which
has been ignored ever since these tests were originally added in
c859600954 ([PATCH] read-tree: save more user hassles during
fast-forward., 2005-06-07).
Since the exit code was ignored we'd hide errors here under
SANITIZE=leak, which resulted in me mistakenly marking these tests as
passing under SANITIZE=leak in e5a917fcf4 (unpack-trees: don't leak
memory in verify_clean_subdirectory(), 2021-10-07) and
4ea08416b8 (leak tests: mark a read-tree test as passing
SANITIZE=leak, 2021-10-31).
As it would be non-trivial to fix these tests (the leak is in
revision.c) let's un-mark them as passing under SANITIZE=leak in
addition to fixing the issue of ignoring the exit code.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the test_stdout_line_count helper added in
cdff1bb5a3 (test-lib-functions: introduce test_stdout_line_count,
2021-07-04) so that we'll spot if git itself dies, segfaults etc in
these expressions.
Because we didn't distinguish these failure conditions before I'd
mistakenly marked these tests as passing under SANITIZE=leak in
dd9cede913 (leak tests: mark some rev-list tests as passing with
SANITIZE=leak, 2021-10-31).
While we're at it let's re-indent these lines to match our usual
style, as we're having to change all of them anyway.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change some of the patterns in the test suite where we were hiding the
exit code from "git" by invoking it in a sub-shell within a "test"
expression to use temporary files and test_cmp instead.
These are not all the occurrences of this anti-pattern, but these in
particular hid issues where LSAN was dying, and I'd thus marked these
tests as passing under the linux-leaks CI job in past commits with
"TEST_PASSES_SANITIZE_LEAK=true". Let's deal with that by either
removing that marking, or skipping specific tests under
!SANITIZE_LEAK.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a Time-of-check to time-of-use (TOCTOU) race in code added in
680ee550d7 (commit: skip discarding the index if there is no
pre-commit hook, 2017-08-14).
This obscure race condition can occur if we e.g. ran the "pre-commit"
hook and it modified the index, but hook_exists() returns false later
on (e.g., because the hook itself went away, the directory became
unreadable, etc.). Then we won't call discard_cache() when we should
have.
The race condition itself probably doesn't matter, and users would
have been unlikely to run into it in practice. This problem has been
noted on-list when 680ee550d7 was discussed[1], but had not been
fixed.
This change is mainly intended to improve the readability of the code
involved, and to make reasoning about it more straightforward. It
wasn't as obvious what we were trying to do here, but by having an
"invoked_hook" it's clearer that e.g. our discard_cache() is happening
because of the earlier hook execution.
Let's also change this for the push-to-checkout hook. Now instead of
checking if the hook exists and either doing a push to checkout or a
push to deploy we'll always attempt a push to checkout. If the hook
doesn't exist we'll fall back on push to deploy. The same behavior as
before, without the TOCTOU race. See 0855331941 (receive-pack:
support push-to-checkout hook, 2014-12-01) for the introduction of the
previous behavior.
This leaves uses of hook_exists() in two places that matter. The
"reference-transaction" check in refs.c, see 6754159767 (refs:
implement reference transaction hook, 2020-06-19), and the
"prepare-commit-msg" hook, see 66618a50f9 (sequencer: run
'prepare-commit-msg' hook, 2018-01-24).
In both of those cases we're saving ourselves CPU time by not
preparing data for the hook that we'll then do nothing with if we
don't have the hook. So using this "invoked_hook" pattern doesn't make
sense in those cases.
The "reference-transaction" and "prepare-commit-msg" hook also aren't
racy. In those cases we'll skip the hook runs if we race with a new
hook being added, whereas in the TOCTOU races being fixed here we were
incorrectly skipping the required post-hook logic.
1. https://lore.kernel.org/git/20170810191613.kpmhzg4seyxy3cpq@sigill.intra.peff.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a minor bug introduced in bc40ce4de6 (merge: --no-verify to
bypass pre-merge-commit hook, 2019-08-07), when that change made the
--no-verify option bypass the "pre-merge-commit" hook it didn't update
the corresponding find_hook() (later hook_exists()) condition.
As can be seen in the preceding commit in 6098817fd7 (git-merge:
honor pre-merge-commit hook, 2019-08-07) the two should go hand in
hand. There's no point in invoking discard_cache() here if the hook
couldn't have possibly updated the index.
It's buggy that we use "hook_exist()" here, and as discussed in the
subsequent commit it's subject to obscure race conditions that we're
about to fix, but for now this change is a strict improvement that
retains any caveats to do with the use of "hooks_exist()" as-is.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "nr" and "alloc" members of "struct string_list" to use
"size_t" instead of "nr". On some platforms the size of an "unsigned
int" will be smaller than a "size_t", e.g. a 32 bit unsigned v.s. 64
bit unsigned. As "struct string_list" is a generic API we use in a lot
of places this might cause overflows.
As one example: code in "refs.c" keeps track of the number of refs
with a "size_t", and auxiliary code in builtin/remote.c in
get_ref_states() appends those to a "struct string_list".
While we're at it split the "nr" and "alloc" in string-list.h across
two lines, which is the case for most such struct member
declarations (e.g. in "strbuf.h" and "strvec.h").
Changing e.g. "int i" to "size_t i" in run_and_feed_hook() isn't
strictly necessary, and there are a lot more cases where we'll use a
local "int", "unsigned int" etc. variable derived from the "nr" in the
"struct string_list". But in that case as well as
add_wrapped_shortlog_msg() in builtin/shortlog.c we need to adjust the
printf format referring to "nr" anyway, so let's also change the other
variables referring to it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a few stray users of the inline gettext.h Q_() function to stop
casting its "n" argument, the vast majority of the users of that
wrapper API use the implicit cast to "unsigned long".
The ngettext() function (which Q_() resolves to) takes an "unsigned
long int", and so does our Q_() wrapper for it, see 0c9ea33b90 (i18n:
add stub Q_() wrapper for ngettext, 2011-03-09). The function isn't
ours, but provided by e.g. GNU libintl.
This amends code added in added in 7171a0b0cf (index-pack: correct
"len" type in unpack_data(), 2016-07-13). The cast it added for the
printf format to die() was needed, but not the cast to Q_().
Likewise the casts in strbuf.c added in 8f354a1fae (l10n: localizable
upload progress messages, 2019-07-02) and for
builtin/merge-recursive.c in ccf7813139 (i18n: merge-recursive: mark
error messages for translation, 2016-09-15) weren't needed.
In the latter case the cast was copy/pasted from the argument to
warning() itself, added in b74d779bd9 (MinGW: Fix compiler warning in
merge-recursive, 2009-05-23). The cast for warning() is needed, but
not the one for ngettext()'s "n" argument.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Generation Data (GDAT) and Generation Data Overflow (GDOV) chunks
store corrected commit date offsets, used for generation number v2.
Recent changes have demonstrated that previous versions of Git were
incorrectly parsing data from these chunks, but might have also been
writing them incorrectly.
I asserted [1] that the previous fixes were sufficient because the known
reasons for incorrectly writing generation number v2 data relied on
parsing the information incorrectly out of a commit-graph file, but the
previous versions of Git were not reading the generation number v2 data.
However, Patrick demonstrated [2] a case where in split commit-graphs
across an alternate boundary (and possibly some other special
conditions) it was possible to have a commit-graph that was generated by
a previous version of Git have incorrect generation number v2 data which
results in errors like the following:
commit-graph generation for commit <oid> is 1623273624 < 1623273710
[1] https://lore.kernel.org/git/f50e74f0-9ffa-f4f2-4663-269801495ed3@github.com/
[2] https://lore.kernel.org/git/Yh93vOkt2DkrGPh2@ncase/
Clearly, there is something else going on. The situation is not
completely understood, but the errors do not reproduce if the
commit-graphs are all generated by a Git version including these recent
fixes.
If we cannot trust the existing data in the GDAT and GDOV chunks, then
we can alter the format to change the chunk IDs for these chunks. This
causes the new version of Git to silently ignore the older chunks (and
disabling generation number v2 in the process) while writing new
commit-graph files with correct data in the GDA2 and GDO2 chunks.
Update commit-graph-format.txt including a historical note about these
deprecated chunks.
Reported-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many output modes of "ls-files" do not work with its
"--recurse-submodules" option, but the "-s" mode has been taught to
work with it.
* jt/ls-files-stage-recurse:
ls-files: support --recurse-submodules --stage
"git checkout -b branch/with/multi/level/name && git stash" only
recorded the last level component of the branch name, which has
been corrected.
* gc/stash-on-branch-with-multi-level-name:
stash: strip "refs/heads/" with skip_prefix
The error message given by "git switch HEAD~4" has been clarified
to suggest the "--detach" option that is required.
* ah/advice-switch-requires-detach-to-detach:
switch: mention the --detach option when dying due to lack of a branch
Use designated initializers we started using in mid 2017 in more
parts of the codebase that are relatively quiescent.
* ab/c99-designated-initializers:
fast-import.c: use designated initializers for "partial" struct assignments
refspec.c: use designated initializers for "struct refspec_item"
convert.c: use designated initializers for "struct stream_filter*"
userdiff.c: use designated initializers for "struct userdiff_driver"
archive-*.c: use designated initializers for "struct archiver"
object-file: use designated initializers for "struct git_hash_algo"
trace2: use designated initializers for "struct tr2_dst"
trace2: use designated initializers for "struct tr2_tgt"
imap-send.c: use designated initializers for "struct imap_server_conf"
When "index-pack" dies due to incoming data exceeding the maximum
allowed input size, include the value of the limit in the error
message.
* mc/index-pack-report-max-size:
index-pack: clarify the breached limit
Tighten the language around "working tree" and "worktree" in the
docs.
* ds/worktree-docs:
worktree: use 'worktree' over 'working tree'
worktree: use 'worktree' over 'working tree'
worktree: use 'worktree' over 'working tree'
worktree: use 'worktree' over 'working tree'
worktree: use 'worktree' over 'working tree'
worktree: use 'worktree' over 'working tree'
worktree: use 'worktree' over 'working tree'
worktree: extract checkout_worktree()
worktree: extract copy_sparse_checkout()
worktree: extract copy_filtered_worktree_config()
worktree: combine two translatable messages
A not-so-common mistake is to write a script to feed "git bisect
run" without making it executable, in which case all tests will
exit with 126 or 127 error codes, even on revisions that are marked
as good. Try to recognize this situation and stop iteration early.
* rs/bisect-executable-not-found:
bisect--helper: double-check run command on exit code 126 and 127
bisect: document run behavior with exit codes 126 and 127
bisect--helper: release strbuf and strvec on run error
bisect--helper: report actual bisect_state() argument on error
Further polishing of "git sparse-checkout".
* en/sparse-checkout-fixes:
sparse-checkout: reject arguments in cone-mode that look like patterns
sparse-checkout: error or warn when given individual files
sparse-checkout: pay attention to prefix for {set, add}
sparse-checkout: correctly set non-cone mode when expected
sparse-checkout: correct reapply's handling of options
Test modernization.
* cg/t3903-modernize:
tests: make the code more readable
tests: allow testing if a path is truly a file or a directory
t/t3903-stash.sh: replace test [-d|-f] with test_path_is_*
"git submodule update --filter" also requires the "--init" option. Teach
update-clone to do this usage check in C and remove the check from
git-submodule.sh.
In addition, change update-clone's usage string so that it teaches users
about "git submodule update" instead of "git submodule--helper
update-clone" (the string is copied from git-submodule.sh). This should
be more helpful to users since they don't invoke update-clone directly.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test the "--filter" option to make sure we don't break anything while
refactoring "git submodule update".
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the logic of "git submodule--helper ensure-core-worktree" into
run-update-procedure, and since this makes the ensure-core-worktree
command obsolete, remove it.
As a result, the order of two operations in git-submodule.sh is
reversed: 'set the value of core.worktree' now happens after the call to
"git submodule--helper relative-path". This is safe - "relative-path"
does not depend on the value of core.worktree.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git submodule--helper update-clone" the --init flag and remove
the corresponding shell code.
When the `--init` flag is passed to the subcommand, we do not spawn a
new subprocess and call `submodule--helper init` on the submodule paths,
because the Git machinery is not able to pick up the configuration
changes introduced by that init call. So we instead run the
`init_submodule_cb()` callback over each submodule in the same process.
[1] https://lore.kernel.org/git/CAP8UFD0NCQ5w_3GtT_xHr35i7h8BuLX4UcHNY6VHPGREmDVObA@mail.gmail.com/
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We allow callers of the `init_submodule()` function to optionally
override the superprefix from the environment.
We need to enable this option because in our conversion of the update
command that will follow, the '--init' option will be handled through
this API. We will need to change the superprefix at that time to ensure
the display paths show correctly in the output messages.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We create a function called `do_get_submodule_displaypath()` that
generates the display path required by several submodule functions, and
takes a custom superprefix parameter, instead of reading it from the
environment.
We then redefine the existing `get_submodule_displaypath()` function
as a call to this new function, where the superprefix is obtained from
the environment.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach run-update-procedure to handle --remote instead of parsing
--remote in git-submodule.sh. As a result, "git submodule--helper
[print-default-remote|remote-branch]" have no more callers, so remove
them.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do away with the indirection of local variables added in
c51f8f94e5 (submodule--helper: run update procedures from C,
2021-08-24).
These were only needed because in C you can't get a pointer to a
single bit, so we were using intermediate variables instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`get_default_remote()` retrieves the name of a remote by resolving the
refs from of the current repository's ref store.
Thus in order to use it for retrieving the remote name of a submodule,
we have to start a new subprocess which runs from the submodule
directory.
Let's instead introduce a function called `repo_get_default_remote()`
which takes any repository object and retrieves the remote accordingly.
`get_default_remote()` is then defined as a call to
`repo_get_default_remote()` with 'the_repository' passed to it.
Now that we have `repo_get_default_remote()`, we no longer have to start
a subprocess that called `submodule--helper get-default-remote` from
within the submodule directory.
So let's make a function called `get_default_remote_submodule()` which
takes a submodule path, and returns the default remote for that
submodule, all within the same process.
We can now use this function to save an unnecessary subprocess spawn in
`sync_submodule()`, and also in a subsequent patch, which will require
this functionality.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Helped-by: Glen Choo <chooglen@google.com>
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach run-update-procedure to determine the oid of the submodule's HEAD
instead of doing it in git-submodule.sh.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a function, update_submodule2(), that will implement the
functionality of run-update-procedure and its surrounding shell code in
submodule.sh. This name is temporary; it will replace update_submodule()
when the sh to C conversion is complete.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is dead code - it has not been used since c51f8f94e5
(submodule--helper: run update procedures from C, 2021-08-24).
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend some submodule tests to test for the failure output of "git
submodule [update|init]". The lack of such tests hid a regression in
an earlier version of a subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "struct path_cache" added in 102de880d2 (path.c: migrate global
git_path_* to take a repository argument, 2018-05-17) is only used
directly by code in repository.[ch] (but populated in path.[ch]).
Let's move this code to repository.[ch], and stop leaking this memory
when we run repo_clear(). To avoid the cast change it from a "const
char *" to a "char *".
This also removes the "PATH_CACHE_INIT" macro, which has never been
used for anything. For the "struct repository" we already make a hard
assumption that it (and "the_repository") can be identically
initialized by making it a "static" variable, so making use of a
"PATH_CACHE_INIT" somewhere would have been confusing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend code added in d9c66f0b5b (range-diff: first rudimentary
implementation, 2018-08-13) to use a "goto cleanup" pattern. This
makes for less code, and frees memory that we'd previously leak.
The reason for changing free(util) to FREE_AND_NULL(util) is because
at the end of the function we append the contents of "util" to a
"struct string_list" if it's non-NULL.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a public release_patch() version of the private free_patch()
function added in 13b5af22f3 (apply: move libified code from
builtin/apply.c to apply.{c,h}, 2016-04-22). Unlike the existing
function this one doesn't free() the "struct patch" itself, so we can
use it for variables on the stack.
Use it in range-diff.c to fix a memory leak in common range-diff
invocations, e.g.:
git -P range-diff origin/master origin/next origin/seen
Would emit several errors when compiled with SANITIZE=leak, but now
runs cleanly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in code added in 6c622f9f0b (commit-graph: write
commit-graph chains, 2019-06-18). We needed to free the "lock_name" if
we encounter errors, and the "graph_name" after we'd run unlink() on
it.
For the case of write_commit_graph_file() refactoring the code to free
the "lock_name" after we were done using the "struct lock_file lk"
would have made the control flow more complex. Luckily we can free the
"lock_file" right after the hold_lock_file_for_update() call, if it
makes use of "path" at all it'll have copied its contents to a "struct
strbuf" of its own.
While I'm at it let's fix code added in fb10ca5b54 (sparse-checkout:
write using lockfile, 2019-11-21) in write_patterns_and_update() to
avoid the same complexity that I thought I needed when I wrote the
initial fix for write_commit_graph_file(). We can free the
"sparse_filename" right after calling hold_lock_file_for_update(), we
don't need to wait until we're exiting the function to do so.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug in fill_oids_from_packs(), we should always stop_progress(),
but did not do so if we returned an error here. This also plugs a
memory leak in those cases by releasing the two "struct strbuf"
variables the function uses.
While I'm at it stop hardcoding "-1" here and just use the return
value of error() instead, which happens to be "-1".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When this code was migrated to the string_list API in
d88b14b3fd (commit-graph: use string-list API for input, 2018-06-27)
it was made to use used both STRING_LIST_INIT_NODUP and a
strbuf_detach() pattern.
Those should not be used together if string_list_clear() is expected
to free the memory, instead we need to either use STRING_LIST_INIT_DUP
with a string_list_append_nodup(), or a STRING_LIST_INIT_NODUP and
manually fiddle with the "strdup_strings" member before calling
string_list_clear(). Let's do the former.
Since "strdup_strings = 1" is set now other code might be broken by
relying on "pack_indexes" not to duplicate it strings, but that
doesn't happen. When we pass this down to write_commit_graph() that
code uses the "struct string_list" without modifying it. Let's add a
"const" to the variable to have the compiler enforce that assumption.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in code added in a6226fd772 (submodule--helper:
convert the bulk of cmd_add() to C, 2021-08-10). If "realrepo" isn't a
copy of the "repo" member we should free() it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend the logic added in fddf2ebe38 (transport: teach all vtables to
allow fetch first, 2019-08-21) and save ourselves pointless work in
fetch_refs_from_bundle().
The fetch_refs_from_bundle() caller doesn't care about the "struct
ref *result" return value of get_refs_from_bundle(), and doesn't need
any of the work we were doing in looping over the
"data->header.references" in get_refs_from_bundle().
So this change saves us work, and also fixes a memory leak that we had
when called from fetch_refs_from_bundle(). The other caller of
get_refs_from_bundle() is the "get_refs_list" member we set up for the
"struct transport_vtable bundle_vtable". That caller does care about
the "struct ref *result" return value.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixing this small memory leak in cmd_bundle_create() gets
"t5607-clone-bundle.sh" closer to passing under SANITIZE=leak.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug a trivial memory leak in code added in a2d725b7bd (Use an
external program to implement fetching with curl, 2009-08-05).
To do this have the cmd_main() use a "goto cleanup" pattern, and to
return an error of 1 unless we can fall through to the http_cleanup()
at the end.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug a memory leak in credential_apply_config() by adding and using a
new urlmatch_config_release() function. This just does a
string_list_clear() on the "vars" member.
This finished up work on normalizing the init/free pattern in this
API, started in 73ee449bbf (urlmatch.[ch]: add and use
URLMATCH_CONFIG_INIT, 2021-10-01).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend the freeing logic added in e6e045f803 (diff.c: buffer all
output if asked to, 2017-06-29) to free the containing "buf" in
addition to its members.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in 53eda89b2f (merge-base: teach "git merge-base"
to drive underlying merge_bases_many(), 2008-07-30) by calling free()
on the "struct commit **" list used by "git merge-base".
This gets e.g. "t6010-merge-base.sh" closer to passing under
SANITIZE=leak, it failed 8 tests before when compiled with that
option, and now fails only 5 tests.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix various memory leaks in "git index-pack", due to how tightly
coupled this command is with the revision walking this doesn't make
any new tests pass.
But e.g. this now passes, and had several failures before, i.e. we
still have failures in tests 3, 5 etc., which are being skipped here.
./t5300-pack-object.sh --run=1-2,4,6-27,30-42
It is a bit odd that we'll free "opts.anomaly", since the "opts" is a
"struct pack_idx_option" declared in pack.h. In pack-write.c there's a
reset_pack_idx_option(), but it only wipes the contents, but doesn't
free() anything.
Doing this here in cmd_index_pack() is correct because while the
struct is declared in pack.h, this code in builtin/index-pack.c (in
read_v2_anomalous_offsets()) is what allocates the "opts.anomaly", so
we should also free it here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In glibc >= 2.34 MALLOC_CHECK_ and MALLOC_PERTURB_ environment
variables have been replaced by GLIBC_TUNABLES. Also the new
glibc requires that you preload a library called libc_malloc_debug.so
to get these features.
Using the ordinary glibc system variable detect if this is glibc >= 2.34 and
use GLIBC_TUNABLES and the new library.
This patch was inspired by a Richard W.M. Jones ndbkit patch
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gpg-agent is one of several processes that newer releases of GnuPG
start automatically. Issue a kill to each of them to ensure they do not
affect separate tests. (Yes, the separate GNUPGHOME should do that
already. If we find that is case, we could drop the --kill entirely.)
In terms of compatibility, the 'all' keyword was added to the --kill &
--reload options in GnuPG 2.1.18. Debian and RHEL are often used as
indicators of how a change might affect older systems we often try to
support.
- Debian Strech (old old stable), which has limited security support
until June 2022, has GnuPG 2.1.18 (or 2.2.x in backports).
- CentOS/RHEL 7, which is supported until June 2024, has GnuPG
2.0.22, which lacks the --kill option, so the change won't have
any impact.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With gpgsm from gnupg-2.3, the changes to the trustlist.txt do not
appear to be picked up without refreshing the gpg-agent. Use the 'all'
keyword to reload all of the gpg components. The scdaemon is started as
a child of gpg-agent, for example.
We used to have a --kill at this spot, but I removed it in 2e285e7803
(t/lib-gpg: drop redundant killing of gpg-agent, 2019-02-07). It seems
like it might be necessary (again) for 2.3.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Checking if signing was successful will now accept '[GNUPG]:
SIG_CREATED' on the beginning of the first or any subsequent line. Not
just explictly the second one anymore.
Gpgsm v2.3 changed its output when listing keys from `fingerprint` to
`sha1/2 fpr`. This leads to the gpgsm tests silently not being executed
because of a failed prerequisite.
Switch to gpg's `--with-colons` output format when evaluating test
prerequisites to make parsing more robust. This also allows us to
combine the existing grep/cut/tr/echo pipe for writing the trustlist.txt
into a single awk expression.
Adjust error message checking in test for v2.3 specific output changes.
Helped-By: Junio C Hamano <gitster@pobox.com>
Helped-By: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in ff37a60c36 (log tests: check if grep_config() is
called by "log"-like cmds, 2022-02-16), a "test_done" command used
during development made it into a submitted patch causing tests 41-136
in t/t4202-log.sh to be skipped.
Reported-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage help for --type option of `git config` is missing `type`
in the argument placeholder (`<>`). Add it.
Signed-off-by: Matheus Felipe <matheusfelipeog@protonmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When renaming a remote, Git needs to rename all remote tracking
references to the remote's new name (e.g., renaming
"refs/remotes/old/foo" to "refs/remotes/new/foo" when renaming a remote
from "old" to "new").
This can be somewhat slow when there are many references to rename,
since each rename is done in a separate call to rename_ref() as opposed
to grouping all renames together into the same transaction. It would be
nice to execute all renames as a single transaction, but there is a
snag: the reference transaction backend doesn't support renames during a
transaction (only individually, via rename_ref()).
The reasons there are described in more detail in [1], but the main
problem is that in order to preserve the existing reflog, it must be
moved while holding both locks (i.e., on "oldname" and "newname"), and
the ref transaction code doesn't support inserting arbitrary actions
into the middle of a transaction like that.
As an aside, adding support for this to the ref transaction code is
less straightforward than inserting both a ref_update() and ref_delete()
call into the same transaction. rename_ref()'s special handling to
detect D/F conflicts would need to be rewritten for the transaction code
if we wanted to proactively catch D/F conflicts when renaming a
reference during a transaction. The reftable backend could support this
much more readily because of its lack of D/F conflicts.
Instead of a more complex modification to the ref transaction code,
display a progress meter when running verbosely in order to convince the
user that Git is doing work while renaming a remote.
This is mostly done as-expected, with the minor caveat that we
intentionally count symrefs renames twice, since renaming a symref takes
place over two separate calls (one to delete the old one, and another to
create the new one).
[1]: https://lore.kernel.org/git/572367B4.4050207@alum.mit.edu/
Suggested-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git remote rename' command doesn't currently take any command-line
arguments besides the existing and new name of a remote, and so has no
need to call parse_options().
But the subsequent patch will add a `--[no-]progress` option, in which
case we will need to call parse_options().
Do so now so as to avoid cluttering the following patch with noise, like
adjusting setting `rename.{old,new}_name` to argv[0] and argv[1], since
parse_options handles advancing argv past the name of the sub-command.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the testcase to exercise backfilling of tags for fetches we evoke a
failure of the backfilling mechanism by creating a reference that later
on causes a D/F conflict. Because the assumption was that git-fetch(1)
would notice the D/F conflict early on this conflicting reference was
created via the reference-transaction hook just when we were about to
write the backfilled tag. As it turns out though this is not the case,
and the fetch fails in the same way when we create the conflicting ref
up front.
Simplify the test setup creating the reference up front, which allows us
to get rid of the hook script.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it consistent with the rest of the documentation.
Signed-off-by: Nihal Jere <nihal@nihaljere.xyz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a template to do the "mkdir -p" of $(@D) (the parent dir of $@)
for us, and use it for the "make lint-docs" targets I added in
8650c6298c (doc lint: make "lint-docs" non-.PHONY, 2021-10-15).
As seen in 4c64fb5aad (Documentation/Makefile: fix lint-docs mkdir
dependency, 2021-10-26) maintaining these manual lists of parent
directory dependencies is fragile, in addition to being obviously
verbose.
I used this pattern at the time because I couldn't find another method
than "order-only" prerequisites to avoid doing a "mkdir -p $(@D)" for
every file being created, which as noted in [1] would be significantly
slower.
But as it turns out we can use this neat trick of only doing a "mkdir
-p" if the $(wildcard) macro tells us the path doesn't exist. A re-run
of a performance test similar to that noted downthread of [1] in [2]
shows that this is faster, in addition to being less verbose and more
reliable (this uses my "git-hyperfine" thin wrapper for "hyperfine"[3]):
$ git -c hyperfine.hook.setup= hyperfine -L rev HEAD~1,HEAD~0 -s 'make -C Documentation lint-docs' -p 'rm -rf Documentation/.build' 'make -C Documentation -j1 lint-docs'
Benchmark 1: make -C Documentation -j1 lint-docs' in 'HEAD~1
Time (mean ± σ): 2.914 s ± 0.062 s [User: 2.449 s, System: 0.489 s]
Range (min … max): 2.834 s … 3.020 s 10 runs
Benchmark 2: make -C Documentation -j1 lint-docs' in 'HEAD~0
Time (mean ± σ): 2.315 s ± 0.062 s [User: 1.950 s, System: 0.386 s]
Range (min … max): 2.229 s … 2.397 s 10 runs
Summary
'make -C Documentation -j1 lint-docs' in 'HEAD~0' ran
1.26 ± 0.04 times faster than 'make -C Documentation -j1 lint-docs' in 'HEAD~1'
So let's use that pattern both for the "lint-docs" target, and a few
miscellaneous other targets.
This method of creating parent directories is explicitly racy in that
we don't know if we're going to say always create a "foo" followed by
a "foo/bar" under parallelism, or skip the "foo" because we created
"foo/bar" first. In this case it doesn't matter for anything except
that we aren't guaranteed to get the same number of rules firing when
running make in parallel.
1. https://lore.kernel.org/git/211028.861r45y3pt.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/211028.86o879vvtp.gmgdl@evledraar.gmail.com/
3. https://gitlab.com/avar/git-hyperfine/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The $(QUIET) variables we define are largely duplicated between our
various Makefiles, let's define them in the new "shared.mak" instead.
Since we're not using the environment to pass these around we don't
need to export the "QUIET_GEN" and "QUIET_BUILT_IN" variables
anymore. The "QUIET_GEN" variable is used in "git-gui/Makefile" and
"gitweb/Makefile", but they've got their own definition for those. The
"QUIET_BUILT_IN" variable is only used in the top-level "Makefile". We
still need to export the "V" variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move these variables over to the shared.mak, we'll make use of them in
a subsequent commit.
Note that there's reason for these to be "simply expanded variables",
i.e. to use ":=" assignments instead of lazily expanded "="
assignments. We could use "=", but let's leave this as-is for now for
ease of review.
See 425ca6710b (Makefile: allow combining UBSan with other
sanitizers, 2017-07-15) for the commit that introduced these.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was added in 30248886ce (Makefile: disable default implicit
rules, 2010-01-26), let's move it to the top of "shared.mak" so it'll
apply to all our Makefiles.
This doesn't benefit the main Makefile at all, since it already had
the rule, but since we're including shared.mak in other Makefiles
starts to benefit them. E.g. running the 'man" target is now faster:
$ git -c hyperfine.hook.setup= hyperfine -L rev HEAD~1,HEAD~0 -s 'make -C Documentation man' 'make -C Documentation -j1 man'
Benchmark 1: make -C Documentation -j1 man' in 'HEAD~1
Time (mean ± σ): 121.7 ms ± 8.8 ms [User: 105.8 ms, System: 18.6 ms]
Range (min … max): 112.8 ms … 148.4 ms 26 runs
Benchmark 2: make -C Documentation -j1 man' in 'HEAD~0
Time (mean ± σ): 97.5 ms ± 8.0 ms [User: 80.1 ms, System: 20.1 ms]
Range (min … max): 89.8 ms … 111.8 ms 32 runs
Summary
'make -C Documentation -j1 man' in 'HEAD~0' ran
1.25 ± 0.14 times faster than 'make -C Documentation -j1 man' in 'HEAD~1'
The reason for that can be seen when comparing that run with
"--debug=a". Without this change making a target like "git-status.1"
will cause "make" to consider not only "git-status.txt", but
"git-status.txt.o", as well as numerous other implicit suffixes such
as ".c", ".cc", ".cpp" etc. See [1] for a more detailed before/after
example.
So this is causing us to omit a bunch of work we didn't need to
do. For making "git-status.1" the "--debug=a" output is reduced from
~140k lines to ~6k.
1. https://lore.kernel.org/git/220222.86bkyz875k.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Combine the definitions of $(FIND_SOURCE_FILES) and $(LIB_H) to speed
up the Makefile, as these are the two main expensive $(shell) commands
that we execute unconditionally.
When see what was in $(FOUND_SOURCE_FILES) that wasn't in $(LIB_H) via
the ad-hoc test of:
$(error $(filter-out $(LIB_H),$(filter %.h,$(ALL_SOURCE_FILES))))
$(error $(filter-out $(ALL_SOURCE_FILES),$(filter %.h,$(LIB_H))))
We'll get, respectively:
Makefile:850: *** t/helper/test-tool.h. Stop.
Makefile:850: *** . Stop.
I.e. we only had a discrepancy when it came to
t/helper/test-tool.h. In terms of correctness this was broken before,
but now works:
$ make t/helper/test-tool.hco
HDR t/helper/test-tool.h
This speeds things up a lot:
$ git -c hyperfine.hook.setup= hyperfine -L rev HEAD~1,HEAD~0 -s 'make NO_TCLTK=Y' 'make -j1 NO_TCLTK=Y' --warmup 10 -M 10
Benchmark 1: make -j1 NO_TCLTK=Y' in 'HEAD~1
Time (mean ± σ): 159.9 ms ± 6.8 ms [User: 137.2 ms, System: 28.0 ms]
Range (min … max): 154.6 ms … 175.9 ms 10 runs
Benchmark 2: make -j1 NO_TCLTK=Y' in 'HEAD~0
Time (mean ± σ): 100.0 ms ± 1.3 ms [User: 84.2 ms, System: 20.2 ms]
Range (min … max): 98.8 ms … 102.8 ms 10 runs
Summary
'make -j1 NO_TCLTK=Y' in 'HEAD~0' ran
1.60 ± 0.07 times faster than 'make -j1 NO_TCLTK=Y' in 'HEAD~1'
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Override built-in rules of GNU make that use a wildcard target. This
can speeds things up significantly as we don't need to stat() so many
files. GNU make does that by default to see if it can retrieve their
contents from RCS or SCCS. See [1] for an old mailing list discussion
about how to disable these.
The speed-up may vary. I've seen 1-10% depending on the speed of the
local disk, caches, -jN etc. Running:
strace -f -c -S calls make -j1 NO_TCLTK=Y
Shows that we reduce the number of syscalls we make, mostly in "stat"
calls.
We could also invoke make with "-r" by setting "MAKEFLAGS = -r"
early. Doing so might make us a bit faster still. But doing so is a
much bigger hammer, since it will disable all built-in rules,
some (all?) of which can be seen with:
make -f/dev/null -p | grep -v -e ^# -e ^$
We may have something that relies on them, so let's go for the more
isolated optimization here that gives us most or all of the wins.
1. https://lists.gnu.org/archive/html/help-make/2002-11/msg00063.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have various behavior that's shared across our Makefiles, or that
really should be (e.g. via defined templates). Let's create a
top-level "shared.mak" to house those sorts of things, and start by
adding the ".DELETE_ON_ERROR" flag to it.
See my own 7b76d6bf22 (Makefile: add and use the ".DELETE_ON_ERROR"
flag, 2021-06-29) and db10fc6c09 (doc: simplify Makefile using
.DELETE_ON_ERROR, 2021-05-21) for the addition and use of the
".DELETE_ON_ERROR" flag.
I.e. this changes the behavior of existing rules in the altered
Makefiles (except "Makefile" & "Documentation/Makefile"). I'm
confident that this is safe having read the relevant rules in those
Makfiles, and as the GNU make manual notes that it isn't the default
behavior is out of an abundance of backwards compatibility
caution. From edition 0.75 of its manual, covering GNU make 4.3:
[Enabling '.DELETE_ON_ERROR' is] almost always what you want
'make' to do, but it is not historical practice; so for
compatibility, you must explicitly request it.
This doesn't introduce a bug by e.g. having this
".DELETE_ON_ERROR" flag only apply to this new shared.mak, Makefiles
have no such scoping semantics.
It does increase the danger that any Makefile without an explicit "The
default target of this Makefile is..." snippet to define the default
target as "all" could have its default rule changed if our new
shared.mak ever defines a "real" rule. In subsequent commits we'll be
careful not to do that, and such breakage would be obvious e.g. in the
case of "make -C t".
We might want to make that less fragile still (e.g. by using
".DEFAULT_GOAL" as noted in the preceding commit), but for now let's
simply include "shared.mak" without adding that boilerplate to all the
Makefiles that don't have it already. Most of those are already
exposed to that potential caveat e.g. due to including "config.mak*".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "contrib/scalar/Makefile" be stylistically consistent with
the top-level "Makefile" in first declaring "all" to be the default
rule, followed by including other Makefile snippets.
This adjusts code added in 0a43fb2202 (scalar: create a rudimentary
executable, 2021-12-03), it further ensures that when we add another
"include" file in a subsequent commit that the included file won't be
the one to define our default target.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an interactive session, "git am" without arguments, or even
worse, "git am --whitespace file", waits silently for the user to
feed the patches from the standard input (presumably by typing or
copy-pasting). Give a feedback message to the user when this
happens, as it is unlikely that the user meant to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that cmd_reflog_delete has been libified an exported it into a new
reflog.c library so we can call it directly from builtin/stash.c. This
not only gives us a performance gain since we don't need to create a
subprocess, but it also allows us to use the ref transactions api in the
future.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently stash shells out to reflog in order to delete refs. In an
effort to reduce how much we shell out to a subprocess, libify the
functionality that stash needs into reflog.c.
Add a reflog_delete function that is pretty much the logic in the while
loop in builtin/reflog.c cmd_reflog_delete(). This is a function that
builtin/reflog.c and builtin/stash.c can both call.
Also move functions needed by reflog_delete and export them.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is missing test coverage to ensure that the resulting reflogs
after a git stash drop has had its old oid rewritten if applicable, and
if the refs/stash has been updated if applicable.
Add two tests that verify both of these happen.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Typically with sparse checkouts, we expect files outside the sparsity
patterns to be marked as SKIP_WORKTREE and be missing from the working
tree. Sometimes this expectation would be violated however; including
in cases such as:
* users grabbing files from elsewhere and writing them to the worktree
(perhaps by editing a cached copy in an editor, copying/renaming, or
even untarring)
* various git commands having incomplete or no support for the
SKIP_WORKTREE bit[1,2]
* users attempting to "abort" a sparse-checkout operation with a
not-so-early Ctrl+C (updating $GIT_DIR/info/sparse-checkout and the
working tree is not atomic)[3].
When the SKIP_WORKTREE bit in the index did not reflect the presence of
the file in the working tree, it traditionally caused confusion and was
difficult to detect and recover from. So, in a sparse checkout, since
af6a51875a (repo_read_index: clear SKIP_WORKTREE bit from files present
in worktree, 2022-01-14), Git automatically clears the SKIP_WORKTREE
bit at index read time for entries corresponding to files that are
present in the working tree.
There is another workflow, however, where it is expected that paths
outside the sparsity patterns appear to exist in the working tree and
that they do not lose the SKIP_WORKTREE bit, at least until they get
modified. A Git-aware virtual file system[4] takes advantage of its
position as a file system driver to expose all files in the working
tree, fetch them on demand using partial clone on access, and tell Git
to pay attention to them on demand by updating the sparse checkout
pattern on writes. This means that commands like "git status" only have
to examine files that have potentially been modified, whereas commands
like "ls" are able to show the entire codebase without requiring manual
updates to the sparse checkout pattern.
Thus since af6a51875a, Git with such Git-aware virtual file systems
unsets the SKIP_WORKTREE bit for all files and commands like "git
status" have to fetch and examine them all.
Introduce a configuration setting sparse.expectFilesOutsideOfPatterns to
allow limiting the tracked set of files to a small set once again. A
Git-aware virtual file system or other application that wants to
maintain files outside of the sparse checkout can set this in a
repository to instruct Git not to check for the presence of
SKIP_WORKTREE files. The setting defaults to false, so most users of
sparse checkout will still get the benefit of an automatically updating
index to recover from the variety of difficult issues detailed in
af6a51875a for paths with SKIP_WORKTREE set despite the path being
present.
[1] https://lore.kernel.org/git/xmqqbmb1a7ga.fsf@gitster-ct.c.googlers.com/
[2] The three long paragraphs in the middle of
https://lore.kernel.org/git/CABPp-BH9tju7WVm=QZDOvaMDdZbpNXrVWQdN-jmfN8wC6YVhmw@mail.gmail.com/
[3] https://lore.kernel.org/git/CABPp-BFnFpzwGC11TLoLs8YK5yiisA5D5-fFjXnJsbESVDwZsA@mail.gmail.com/
[4] such as the vfsd described in
https://lore.kernel.org/git/20220207190320.2960362-1-jonathantanmy@google.com/
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-recursive would only report messages from inner merges when the
GIT_MERGE_VERBOSITY was set to 5. Do the same for merge-ort.
Note that somewhat reverts 0d83d8240d ("merge-ort: mark conflict/warning
messages from inner merges as omittable", 2022-02-02) based on two
facts:
* This commit basically removes the showing of messages from inner
merges as well, at least by default. The only difference is that
users can request to get them back by turning up the verbosity.
* Messages from inner merges are specially annotated since 4a3d86e1bb
("merge-ort: make informational messages from recursive merges
clearer", 2022-02-17). The ability to distinguish them from outer
merge comments make them less problematic to include, and easier
for humans to parse.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a tree oid is invalid, parse_tree_indirect() can return NULL. Check
for NULL instead of proceeding as though it were a valid pointer and
segfaulting.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The untracked cache test uses an avoid_racy function to deal with
an mtime-resolution challenge in testing: If an untracked cache
entry's mtime falls in the same second as the mtime of the index
the untracked cache was stored in, then it cannot be trusted.
Explicitly delaying tests is a simple effective strategy to
avoid these issues, but should be avoided where possible.
Switch from a delay-based strategy to instead backdating
all file changes using test-tool chmtime, where that is an
option, to shave 9 seconds off the test run time.
Don't update test cases that delay for other reasons, for now at
least (4 seconds).
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mingw_utime implementation in mingw.c does not support
directories. This means that "test-tool chmtime" fails on Windows when
targeting directories. This has previously been noted and sidestepped
temporarily by Jeff Hostetler, in "t/helper/test-chmtime: skip
directories on Windows" in the "Builtin FSMonitor Part 2" work, but
not yet fixed.
It would make sense to backdate file and folder changes in untracked
cache tests, to avoid needing to insert explicit delays/pauses in the
tests.
Add support for directory date manipulation in mingw_utime by
replacing the file-oriented _wopen() call with the
directory-supporting CreateFileW() windows API explicitly.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable use of 'merged_sparse_dir' in 'threeway_merge'. As with two-way
merge, the contents of each conflicted sparse directory are merged without
referencing the index, avoiding sparse index expansion.
As with two-way merge, the 't/t1092-sparse-checkout-compatibility.sh' test
'read-tree --merge with edit/edit conflicts in sparse directories' confirms
that three-way merges with edit/edit changes (both with and without
conflicts) inside a sparse directory result in the correct index state or
error message. To ensure the index is not unnecessarily expanded, add
three-way merge cases to 'sparse index is not expanded: read-tree'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable two-way merge with 'git read-tree' without expanding the sparse
index. When in a sparse index, a two-way merge will trivially succeed as
long as there are not changes to the same sparse directory in multiple trees
(i.e., sparse directory-level "edit-edit" conflicts). If there are such
conflicts, the merge will fail despite the possibility that individual files
could merge cleanly.
In order to resolve these "edit-edit" conflicts, "conflicted" sparse
directories are - rather than rejected - merged by traversing their
associated trees by OID. For each child of the sparse directory:
1. Files are merged as normal (see Documentation/git-read-tree.txt for
details).
2. Subdirectories are treated as sparse directories and merged in
'twoway_merge'. If there are no conflicts, they are merged according to
the rules in Documentation/git-read-tree.txt; otherwise, the subdirectory
is recursively traversed and merged.
This process allows sparse directories to be individually merged at the
necessary depth *without* expanding a full index.
The 't/t1092-sparse-checkout-compatibility.sh' test 'read-tree --merge with
edit/edit conflicts in sparse directories' tests two-way merges with 1)
changes inside sparse directories that do not conflict and 2) changes that
do conflict (with the correct file(s) reported in the error message).
Additionally, add two-way merge cases to 'sparse index is not expanded:
read-tree' to confirm that the index is not expanded regardless of whether
edit/edit conflicts are present in a sparse directory.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git read-tree' is provided with a prefix, expand the index only if the
prefix is equivalent to a sparse directory or contained within one. If the
index is not expanded in these cases, 'ce_in_traverse_path' will indicate
that the relevant sparse directory is not in the prefix/traverse path,
skipping past it and not unpacking the appropriate tree(s).
If the prefix is in-cone, its sparse subdirectories (if any) will be
traversed correctly without index expansion.
The behavior of 'git read-tree' with prefixes 1) inside of cone, 2) equal to
a sparse directory, and 3) inside a sparse directory are all tested as part
of the 't/t1092-sparse-checkout-compatibility.sh' test 'read-tree --prefix',
ensuring that the sparse index case works the way it did prior to this
change as well as matching non-sparse index sparse-checkout.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable use of sparse index in 'git read-tree'. The integration in this patch
is limited only to usage of 'read-tree' that does not need additional
functional changes for the sparse index to behave as expected (i.e., produce
the same user-facing results as a non-sparse index sparse-checkout). To
ensure no unexpected behavior occurs, the index is explicitly expanded when:
* '--no-sparse-checkout' is specified (because it disables sparse-checkout)
* '--prefix' is specified (if the prefix is inside a sparse directory, the
prefixed tree cannot be properly traversed)
* two or more <tree-ish> arguments are specified ('twoway_merge' and
'threeway_merge' do not yet support merging sparse directories)
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests focused on how 'git read-tree' behaves in sparse checkouts. Extra
emphasis is placed on interactions with files outside the sparse cone, e.g.
merges with out-of-cone conflicts.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exit with an error if a prefix provided to `git read-tree --prefix` begins
with '/'. In most cases, prefixes like this result in an "invalid path"
error; however, the repository root would be interpreted as valid when
specified as '--prefix=/'. This is due to leniency around trailing directory
separators on prefixes (e.g., allowing both '--prefix=my-dir' and
'--prefix=my-dir/') - the '/' in the prefix is actually the *trailing*
slash, although it could be misinterpreted as a *leading* slash.
To remove the confusing repo root-as-'/' case and make it clear that
prefixes should not begin with '/', exit with an error if the first
character of the provided prefix is '/'.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable the 'recursive' diff option for the diff executed as part of 'git
status'. Without the 'recursive' enabled, 'git status' reports index
changes incorrectly when the following conditions were met:
* sparse index is enabled
* there is a difference between the index and HEAD in a file inside a
*subdirectory* of a sparse directory
* the sparse directory index entry is *not* expanded in-core
Because it is not recursive by default, the diff in 'git status' reports
changes only at the level of files and directories that are immediate
children of a sparse directory, rather than recursing into directories with
changes to identify the modified file(s). As a result, 'git status' reports
the immediate subdirectory itself as "modified".
Example:
$ git init
$ mkdir -p sparse/sub
$ echo test >sparse/sub/foo
$ git add .
$ git commit -m "commit 1"
$ echo somethingelse >sparse/sub/foo
$ git add .
$ git commit -a -m "commit 2"
$ git sparse-checkout set --cone --sparse-index 'sparse'
$ git reset --soft HEAD~1
$ git status
On branch master
You are in a sparse checkout.
Changes to be committed:
(use "git restore --staged <file>..." to unstage)
modified: sparse/sub
Enabling the 'recursive' diff option in 'wt_status_collect_changes_index'
corrects this issue by allowing the diff to recurse into subdirectories of
sparse directories to find modified files. Given the same repository setup
as the example above, the corrected result of `git status` is:
$ git status
On branch master
You are in a sparse checkout.
Changes to be committed:
(use "git restore --staged <file>..." to unstage)
modified: sparse/sub/foo
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prevent the repository root from being collapsed into a sparse directory by
treating an empty path as "inside the sparse-checkout". When collapsing a
sparse index (e.g. in 'git sparse-checkout reapply'), the root directory
typically could not become a sparse directory due to the presence of in-cone
root-level files and directories. However, if no such in-cone files or
directories were present, there was no explicit check signaling that the
"repository root path" (an empty string, in the case of
'convert_to_sparse(...)') was in-cone, and a sparse directory index entry
would be created from the repository root directory.
The documentation in Documentation/git-sparse-checkout.txt explicitly states
that the files in the root directory are expected to be in-cone for a
cone-mode sparse-checkout. Collapsing the root into a sparse directory entry
violates that assumption, as sparse directory entries are expected to be
outside the sparse cone and have SKIP_WORKTREE enabled. This invalid state
in turn causes issues with commands that interact with the index, e.g.
'git status'.
Treating an empty (root) path as in-cone prevents the creation of a root
sparse directory in 'convert_to_sparse(...)'. Because the repository root is
otherwise never compared with sparse patterns (in both cone-mode and
non-cone sparse-checkouts), the new check does not cause additional changes
to how sparse patterns are applied.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Generation Data Chunk was implemented and tested in e8b63005c
(commit-graph: implement generation data chunk, 2021-01-16), but the
test was carefully constructed to work on systems with 32-bit dates.
Since the corrected commit date offsets still required more than 31
bits, this triggered writing the generation_data_overflow chunk.
However, upon closer look, the
write_graph_chunk_generation_data_overflow() method writes the offsets
to the chunk (as dictated by the format) but fill_commit_graph_info()
treats the value in the chunk as if it is the full corrected commit date
(not an offset). For some reason, this does not cause an issue when
using the FUTURE_DATE specified in t5318-commit-graph.sh, but it does
show up as a failure in 'git commit-graph verify' if we increase that
FUTURE_DATE to be above four billion.
Fix this error and create a 64-bit timestamp version of the test so we
can test these larger values.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'read_generation_data' member of 'struct commit_graph' was
introduced by 1fdc383c5 (commit-graph: use generation v2 only if entire
chain does, 2021-01-16). The intention was to avoid using corrected
commit dates if not all layers of a commit-graph had that data stored.
The logic in validate_mixed_generation_chain() at that point incorrectly
initialized read_generation_data to 1 if and only if the tip
commit-graph contained the Corrected Commit Date chunk.
This was "fixed" in 448a39e65 (commit-graph: validate layers for
generation data, 2021-02-02) to validate that read_generation_data was
either non-zero for all layers, or it would set read_generation_data to
zero for all layers.
The problem here is that read_generation_data is not initialized to be
non-zero anywhere!
This change initializes read_generation_data immediately after the chunk
is parsed, so each layer will have its value present as soon as
possible.
The read_generation_data member is used in fill_commit_graph_info() to
determine if we should use the corrected commit date or the topological
levels stored in the Commit Data chunk. Due to this bug, all previous
versions of Git were defaulting to topological levels in all cases!
This can be measured with some performance tests. Using the Linux kernel
as a testbed, I generated a complete commit-graph containing corrected
commit dates and tested the 'new' version against the previous, 'old'
version.
First, rev-list with --topo-order demonstrates a 26% improvement using
corrected commit dates:
hyperfine \
-n "old" "$OLD_GIT rev-list --topo-order -1000 v3.6" \
-n "new" "$NEW_GIT rev-list --topo-order -1000 v3.6" \
--warmup=10
Benchmark 1: old
Time (mean ± σ): 57.1 ms ± 3.1 ms
Range (min … max): 52.9 ms … 62.0 ms 55 runs
Benchmark 2: new
Time (mean ± σ): 45.5 ms ± 3.3 ms
Range (min … max): 39.9 ms … 51.7 ms 59 runs
Summary
'new' ran
1.26 ± 0.11 times faster than 'old'
These performance improvements are due to the algorithmic improvements
given by walking fewer commits due to the higher cutoffs from corrected
commit dates.
However, this comes at a cost. The additional I/O cost of parsing the
corrected commit dates is visible in case of merge-base commands that do
not reduce the overall number of walked commits.
hyperfine \
-n "old" "$OLD_GIT merge-base v4.8 v4.9" \
-n "new" "$NEW_GIT merge-base v4.8 v4.9" \
--warmup=10
Benchmark 1: old
Time (mean ± σ): 110.4 ms ± 6.4 ms
Range (min … max): 96.0 ms … 118.3 ms 25 runs
Benchmark 2: new
Time (mean ± σ): 150.7 ms ± 1.1 ms
Range (min … max): 149.3 ms … 153.4 ms 19 runs
Summary
'old' ran
1.36 ± 0.08 times faster than 'new'
Performance issues like this are what motivated 702110aac (commit-graph:
use config to specify generation type, 2021-02-25).
In the future, we could fix this performance problem by inserting the
corrected commit date offsets into the Commit Date chunk instead of
having that data in an extra chunk.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When computing the generation numbers for a commit-graph, we compute
the corrected commit dates and then check if their offsets from the
actual dates is too large to fit in the 32-bit Generation Data chunk.
However, there is a problem with this approach: if we have parsed the
generation data from the previous commit-graph, then we continue the
loop because the corrected commit date is already computed. This causes
an under-count in the number of overflow values.
It is incorrect to add an increment to num_generation_data_overflows
next to this 'continue' statement, because we might start
double-counting commits that are computed because of the depth-first
search walk from a commit with an earlier OID.
Instead, iterate over the full commit list at the end, checking the
offsets to see how many grow beyond the maximum value.
Create a new t5328-commit-graph-64-bit-time.sh test script to handle
special cases of testing 64-bit timestamps. This helps demonstrate this
bug in more cases. It still won't hit all potential cases until the next
change, which reenables reading generation numbers. Use the skip_all
trick from 0a2bfccb9c (t0051: use "skip_all" under !MINGW in
single-test file, 2022-02-04) to make the output clean when run on a
32-bit system.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The graph_git_behavior helper is useful for testing that certain Git
commands behave the same when using the commit-graph and when not using
the commit-graph. Extract it to a new lib-commit-graph.sh file for use
in new test scripts that will split out from t5318.
While doing this extraction, also extract graph_read_expect and the
logic for priming the test_oid_cache.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be helpful to verify that the 'struct commit_graph' that results
from parsing a commit-graph is correctly structured. The existence of
different chunks is not enough to verify that all of the optional
features are correctly enabled.
Update 'test-tool read-graph' to output an "options:" line that includes
information for different parts of the struct commit_graph.
In particular, this change demonstrates that the read_generation_data
option is never being enabled, which will be fixed in a later change.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reading references via `files_read_raw_ref()` we always consult
both the loose reference, and if that wasn't found, we also consult the
packed-refs file. While this makes sense to read a generic reference, it
is wasteful in the case where we only care about symbolic references:
the packed-refs backend does not support them, and thus it cannot ever
return one for us.
Special-case reading of symbolic references for the files backend such
that we always skip asking the packed-refs backend.
We use `refs_read_symbolic_ref()` extensively to determine whether we
need to skip updating local symbolic references during a fetch, which is
why the change results in a significant speedup when doing fetches in
repositories with huge numbers of references. The following benchmark
executes a mirror-fetch in a repository with about 2 million references
via `git fetch --prune --no-write-fetch-head +refs/*:refs/*`:
Benchmark 1: HEAD~
Time (mean ± σ): 68.372 s ± 2.344 s [User: 65.629 s, System: 8.786 s]
Range (min … max): 65.745 s … 70.246 s 3 runs
Benchmark 2: HEAD
Time (mean ± σ): 60.259 s ± 0.343 s [User: 61.019 s, System: 7.245 s]
Range (min … max): 60.003 s … 60.649 s 3 runs
Summary
'HEAD' ran
1.13 ± 0.04 times faster than 'HEAD~'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have two cases in the remote code where we check whether a reference
is symbolic or not, but don't mind in case it doesn't exist or in case
it exists but is a non-symbolic reference. Convert these two callsites
to use the new `refs_read_symbolic_ref()` function, whose intent is to
implement exactly that usecase.
No change in behaviour is expected from this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reading of symbolic and non-symbolic references is currently treated the
same in reference backends: we always call `refs_read_raw_ref()` and
then decide based on the returned flags what type it is. This has one
downside though: symbolic references may be treated different from
normal references in a backend from normal references. The packed-refs
backend for example doesn't even know about symbolic references, and as
a result it is pointless to even ask it for one.
There are cases where we really only care about whether a reference is
symbolic or not, but don't care about whether it exists at all or may be
a non-symbolic reference. But it is not possible to optimize for this
case right now, and as a consequence we will always first check for a
loose reference to exist, and if it doesn't, we'll query the packed-refs
backend for a known-to-not-be-symbolic reference. This is inefficient
and requires us to search all packed references even though we know to
not care for the result at all.
Introduce a new function `refs_read_symbolic_ref()` which allows us to
fix this case. This function will only ever return symbolic references
and can thus optimize for the scenario layed out above. By default, if
the backend doesn't provide an implementation for it, we just use the
old code path and fall back to `read_raw_ref()`. But in case the backend
provides its own, more efficient implementation, we will use that one
instead.
Note that this function is explicitly designed to not distinguish
between missing references and non-symbolic references. If it did, we'd
be forced to always search the packed-refs backend to see whether the
symbolic reference the user asked for really doesn't exist, or if it
exists as a non-symbolic reference.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching from a remote repository we will by default write what has
been fetched into the special FETCH_HEAD reference. The order in which
references are written depends on whether the reference is for merge or
not, which, despite some other conditions, is also determined based on
whether the old object ID the reference is being updated from actually
exists in the repository.
To write FETCH_HEAD we thus loop through all references thrice: once for
the references that are about to be merged, once for the references that
are not for merge, and finally for all references that are ignored. For
every iteration, we then look up the old object ID to determine whether
the referenced object exists so that we can label it as "not-for-merge"
if it doesn't exist. It goes without saying that this can be expensive
in case where we are fetching a lot of references.
While this is hard to avoid in the case where we're writing FETCH_HEAD,
users can in fact ask us to skip this work via `--no-write-fetch-head`.
In that case, we do not care for the result of those lookups at all
because we don't have to order writes to FETCH_HEAD in the first place.
Skip this busywork in case we're not writing to FETCH_HEAD. The
following benchmark performs a mirror-fetch in a repository with about
two million references via `git fetch --prune --no-write-fetch-head
+refs/*:refs/*`:
Benchmark 1: HEAD~
Time (mean ± σ): 75.388 s ± 1.942 s [User: 71.103 s, System: 8.953 s]
Range (min … max): 73.184 s … 76.845 s 3 runs
Benchmark 2: HEAD
Time (mean ± σ): 69.486 s ± 1.016 s [User: 65.941 s, System: 8.806 s]
Range (min … max): 68.864 s … 70.659 s 3 runs
Summary
'HEAD' ran
1.08 ± 0.03 times faster than 'HEAD~'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During packfile negotiation the client will send "want" and "want-ref"
lines to the server to tell it which objects it is interested in. The
server-side parses each of those and looks them up to see whether it
actually has requested objects. This lookup is performed by calling
`parse_object()` directly, which thus hits the object database. In the
general case though most of the objects the client requests will be
commits. We can thus try to look up the object via the commit-graph
opportunistically, which is much faster than doing the same via the
object database.
Refactor parsing of both "want" and "want-ref" lines to do so.
The following benchmark is executed in a repository with a huge number
of references. It uses cached request from git-fetch(1) as input to
git-upload-pack(1) that contains about 876,000 "want" lines:
Benchmark 1: HEAD~
Time (mean ± σ): 7.113 s ± 0.028 s [User: 6.900 s, System: 0.662 s]
Range (min … max): 7.072 s … 7.168 s 10 runs
Benchmark 2: HEAD
Time (mean ± σ): 6.622 s ± 0.061 s [User: 6.452 s, System: 0.650 s]
Range (min … max): 6.535 s … 6.727 s 10 runs
Summary
'HEAD' ran
1.07 ± 0.01 times faster than 'HEAD~'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ps/fetch-atomic:
fetch: make `--atomic` flag cover pruning of refs
fetch: make `--atomic` flag cover backfilling of tags
refs: add interface to iterate over queued transactional updates
fetch: report errors when backfilling tags fails
fetch: control lifecycle of FETCH_HEAD in a single place
fetch: backfill tags before setting upstream
fetch: increase test coverage of fetches
Add "fast_unwind_on_malloc=0" to LSAN_OPTIONS to get more meaningful
stack traces from LSAN. This isn't required under ASAN which will emit
traces such as this one for a leak in "t/t0006-date.sh":
$ ASAN_OPTIONS=detect_leaks=1 ./t0006-date.sh -vixd
[...]
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x488b94 in strdup (t/helper/test-tool+0x488b94)
#1 0x9444a4 in xstrdup wrapper.c:29:14
#2 0x5995fa in parse_date_format date.c:991:24
#3 0x4d2056 in show_dates t/helper/test-date.c:39:2
#4 0x4d174a in cmd__date t/helper/test-date.c:116:3
#5 0x4cce89 in cmd_main t/helper/test-tool.c:127:11
#6 0x4cd1e3 in main common-main.c:52:11
#7 0x7fef3c695e49 in __libc_start_main csu/../csu/libc-start.c:314:16
#8 0x422b09 in _start (t/helper/test-tool+0x422b09)
SUMMARY: AddressSanitizer: 3 byte(s) leaked in 1 allocation(s).
Aborted
Whereas LSAN would emit this instead:
$ ./t0006-date.sh -vixd
[...]
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x4323b8 in malloc (t/helper/test-tool+0x4323b8)
#1 0x7f2be1d614aa in strdup string/strdup.c:42:15
SUMMARY: LeakSanitizer: 3 byte(s) leaked in 1 allocation(s).
Aborted
Now we'll instead git this sensible stack trace under
LSAN. I.e. almost the same one (but starting with "malloc", as is
usual for LSAN) as under ASAN:
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x4323b8 in malloc (t/helper/test-tool+0x4323b8)
#1 0x7f012af5c4aa in strdup string/strdup.c:42:15
#2 0x5cb164 in xstrdup wrapper.c:29:14
#3 0x495ee9 in parse_date_format date.c:991:24
#4 0x453aac in show_dates t/helper/test-date.c:39:2
#5 0x453782 in cmd__date t/helper/test-date.c:116:3
#6 0x451d95 in cmd_main t/helper/test-tool.c:127:11
#7 0x451f1e in main common-main.c:52:11
#8 0x7f012aef5e49 in __libc_start_main csu/../csu/libc-start.c:314:16
#9 0x42e0a9 in _start (t/helper/test-tool+0x42e0a9)
SUMMARY: LeakSanitizer: 3 byte(s) leaked in 1 allocation(s).
Aborted
As the option name suggests this does make things slower, e.g. for
t0001-init.sh we're around 10% slower:
$ hyperfine -L v 0,1 'LSAN_OPTIONS=fast_unwind_on_malloc={v} make T=t0001-init.sh' -r 3
Benchmark 1: LSAN_OPTIONS=fast_unwind_on_malloc=0 make T=t0001-init.sh
Time (mean ± σ): 2.135 s ± 0.015 s [User: 1.951 s, System: 0.554 s]
Range (min … max): 2.122 s … 2.152 s 3 runs
Benchmark 2: LSAN_OPTIONS=fast_unwind_on_malloc=1 make T=t0001-init.sh
Time (mean ± σ): 1.981 s ± 0.055 s [User: 1.769 s, System: 0.488 s]
Range (min … max): 1.941 s … 2.044 s 3 runs
Summary
'LSAN_OPTIONS=fast_unwind_on_malloc=1 make T=t0001-init.sh' ran
1.08 ± 0.03 times faster than 'LSAN_OPTIONS=fast_unwind_on_malloc=0 make T=t0001-init.sh'
I think that's more than worth it to get the more meaningful stack
traces, we can always provide LSAN_OPTIONS=fast_unwind_on_malloc=0 for
one-off "fast" runs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the GIT_BUILD_DIR from a path like "/path/to/build/t/.." to
"/path/to/build". The "TEST_DIRECTORY" here is already made an
absolute path a few lines above this.
We could simply do $(cd "$TEST_DIRECTORY"/.." && pwd) here, but as
noted in the preceding commit the "$TEST_DIRECTORY" can't be anything
except the path containing this test-lib.sh file at this point, so we
can more cheaply and equally strip the "/t" off the end.
This change will be helpful to LSAN_OPTIONS which will want to strip
the build directory path from filenames, which we couldn't do if we
had a "/.." in there.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct a misleading comment added by me in 62f539043c (test-lib:
Allow overriding of TEST_DIRECTORY, 2010-08-19), and add an assertion
that TEST_DIRECTORY cannot point to any directory except the "t"
directory in the top-level of git.git.
This assertion is in effect not new, since we'd already die if that
wasn't the case[1], but it and the updated commentary help to make
that clearer.
The existing comments were also on the wrong arms of the
"if". I.e. the "allow tests to override this" was on the "test -z"
arm. That came about due to a combination of 62f539043c and
85176d7251 (test-lib.sh: convert $TEST_DIRECTORY to an absolute path,
2013-11-17).
Those earlier comments could be read as allowing the "$TEST_DIRECTORY"
to be some path outside of t/. As explained in the updated comment
that's impossible, rather it was meant for *tests* that ran outside of
t/, i.e. the "t0000-basic.sh" tests that use "lib-subtest.sh".
Those tests have a different working directory, but they set the
"TEST_DIRECTORY" to the same path for bootstrapping. The comments now
reflect that, and further comment on why we have a hard dependency on
this.
1. https://lore.kernel.org/git/220222.86o82z8als.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change our ASAN_OPTIONS and LSAN_OPTIONS to set defaults for those
variables, rather than punting out entirely if we already have them in
the environment.
We want to take any user-provided settings over our own, but we can do
that by prepending our defaults to the variable. The libsanitizer
options parsing has "last option wins" semantics.
It's now possible to do e.g.:
LSAN_OPTIONS=report_objects=1 ./t0006-date.sh
And not have the "report_objects=1" setting overwrite our sensible
default of "abort_on_error=1", but by prepending to the list we ensure
that:
LSAN_OPTIONS=report_objects=1:abort_on_error=0 ./t0006-date.sh
Will take the desired "abort_on_error=0" over our default.
See b0f4c9087e (t: support clang/gcc AddressSanitizer, 2014-12-08)
for the original pattern being altered here, and
85b81b35ff (test-lib: set LSAN_OPTIONS to abort by default,
2017-09-05) for when LSAN_OPTIONS was added in addition to the
then-existing ASAN_OPTIONS.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is expected that an empty/unpopulated untracked cache structure can
be written to the index - by update-index, or by a "git status" call
that sees the untracked cache should be enabled and is not, but is
running with options that make the untracked cache non-applicable in
that run (eg a pathspec).
Currently, if that happens, then subsequent "git status" calls end up
populating the untracked cache, but not writing the index (not saving
their work) - so the performance outcome is almost identical to the
cache being altogether disabled.
This continues until the index gets written with the untracked cache
populated, for some *other* reason, such as a working tree change.
Detect the condition where an empty untracked cache exists in the
index and we will collect the list of untracked paths, and queue an
index write under that condition, so that the collected untracked
paths can be written out to the untracked cache extension in the
index.
This change depends on previous fixes to t7519 for the "ignore .git
changes when invalidating UNTR" test case to pass - before this fix,
the test never actually did anything as it was not set up correctly.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In its current state, the t7519 test dealing with untracked cache
assumes that "git update-index --untracked-cache" will *populate* the
untracked cache. This is not correct - it will only add an empty
untracked cache structure to the index.
If we're going to compare two git status runs with something
interesting happening in-between, we need to ensure that the index is
in a stable/steady state *before* that first run.
Achieve this by adding another prior "git status" run.
At this stage this change does nothing, because there is a bug,
addressed in the next patch, whereby once the empty untracked cache
structure is added by the update-index invocation, the untracked cache
gets updated in every subsequent "git status" call, but the index with
these updates does not get written down.
That bug actually invalidates this entire test case - but we're fixing
that next.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t7519 there is a test that writes files to disk, and immediately
writes the index with the untracked cache. Because of
mtime-comparison logic that uses a 1-second resolution, this means
the cached entries are not trusted/used under some circumstances
(see read-cache.c#is_racy_stat()).
Untracked cache tests in t7063 use a 1-second delay to avoid this
issue, but we don't want to introduce arbitrary slowdowns, so instead
use test-tool chmtime to backdate the files slightly. The t7063
delays are a #leftoverbit, to be worked on in a separate series.
This change doesn't actually affect the outcome of the test, but does
enhance its validity, and becomes relevant after later changes.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script uses "git show -s" to display the title of the merge
commit being studied, without explicitly disabling the pager, which
is not a safe thing to do in a script.
For example, when the pager is set to "less" with "-SF" options (-S
tells the pager not to fold lines but allow horizontal scrolling to
show the overly long lines, -F tells the pager not to wait if the
output in its entirety is shown on a single page), and the title of
the merge commit is longer than the width of the terminal, the pager
will wait until the end-user tells it to quit after showing the
single line.
Explicitly disable the pager with this "git show" invocation to fix
this.
The command uses the "--pretty=format:..." format, which adds LF in
between each pair of commits it outputs, which means that the label
for the merge being learned from will be followed by the next
message on the same line. "--pretty=tformat:..." is what we should
instead, which adds LF after each commit, or a more modern way to
spell it, i.e. "--format=...". This existing breakage becomes
easier to see, now we no longer use the pager.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users who are accustomed to doing `git checkout <tag>` assume that
`git switch <tag>` will do the same thing. Inform them of the --detach
option so they aren't left wondering why `git switch` doesn't work but
`git checkout` does.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the read_object_with_reference() function to take an "enum
object_type". It was not prepared to handle an arbitrary "const
char *type", as it was itself calling type_from_string().
Let's change the only caller that passes in user data to use
type_from_string(), and convert the rest to use e.g. "OBJ_TREE"
instead of "tree_type".
The "cat-file" caller is not on the codepath that
handles"--allow-unknown", so the type_from_string() there is safe. Its
use of type_from_string() doesn't functionally differ from that of the
pre-image.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split off a *_literally() variant of the write_object_file_prepare()
function. To do this create a new "hash_object_body()" static helper.
We now defer the type_name() call until the very last moment in
format_object_header() for those callers that aren't "hash-object
--literally".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the hash_object_file() function to take an "enum
object_type".
Since a preceding commit all of its callers are passing either
"{commit,tree,blob,tag}_type", or the result of a call to type_name(),
the parse_object() caller that would pass NULL is now using
stream_object_signature().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before 0c3db67cc8 (hash-object --literally: fix buffer overrun with
extra-long object type, 2015-05-04) the hash-object code being changed
here called write_sha1_file() to both hash and write a loose
object. Before that we'd use hash_sha1_file() to if "-w" wasn't
provided, and otherwise call write_sha1_file().
Now we'll always call the same function for both writing. Let's rename
it from hash_*_literally() to write_*_literally(). Even though the
write_*() might not actually write if HASH_WRITE_OBJECT isn't in
"flags", having it be more similar to write_object_file_flags() than
hash_object_file(), but carrying a name that would suggest that it's a
variant of the latter is confusing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the check_object_signature() function into that non-streaming
version (it accepts an already filled "buf"), and a new
stream_object_signature() which will retrieve the object from storage,
and hash it on-the-fly.
All of the callers of check_object_signature() were effectively
calling two different functions, if we go by cyclomatic
complexity. I.e. they'd either take the early "if (map)" branch and
return early, or not. This has been the case since the "if (map)"
condition was added in 090ea12671 (parse_object: avoid putting whole
blob in core, 2012-03-07).
We can then further simplify the resulting check_object_signature()
function since only one caller wanted to pass a non-NULL "buf" and a
non-NULL "real_oidp". That "read_loose_object()" codepath used by "git
fsck" can instead use hash_object_file() followed by oideq().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change those users of the object API that misused
check_object_signature() by assuming it returned any non-zero when the
OID didn't match the expected value to check <0 instead. In practice
all of this code worked before, but it wasn't consistent with rest of
the users of the API.
Let's also clarify what the <0 return value means in API docs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the API documentation for check_object_signature() to cache.h,
where its prototype is declared. This is in preparation for adding a
companion function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the name of the second argument to check_object_signature() to
be "buf" in object-file.c, making it consistent with the prototype in
cache.h
This fixes an inconsistency that's been with us since 2ade934026 (Add
"check_sha1_signature()" helper function, 2005-04-08), and makes a
subsequent commit's diff smaller, as we'll move these API docs to
cache.h.
While we're at it fix a small grammar error in the documentation,
dropping an "an" before "in-core object-data".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the write_object_file() function to take an "enum object_type"
instead of a "const char *type". Its callers either passed
{commit,tree,blob,tag}_type and can pass the corresponding OBJ_* type
instead, or were hardcoding strings like "blob".
This avoids the back & forth fragility where the callers of
write_object_file() would have the enum type, and convert it
themselves via type_name(). We do have to now do that conversion
ourselves before calling write_object_file_prepare(), but those
codepaths will be similarly adjusted in subsequent commits.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a convenience function to wrap the xsnprintf() command that
generates loose object headers. This code was copy/pasted in various
parts of the codebase, let's define it in one place and re-use it from
there.
All except one caller of it had a valid "enum object_type" for us,
it's only write_object_file_prepare() which might need to deal with
"git hash-object --literally" and a potential garbage type. Let's have
the primary API use an "enum object_type", and define a *_literally()
function that can take an arbitrary "const char *" for the type.
See [1] for the discussion that prompted this patch, i.e. new code in
object-file.c that wanted to copy/paste the xsnprintf() invocation.
In the case of fast-import.c the callers unfortunately need to cast
back & forth between "unsigned char *" and "char *", since
format_object_header() ad encode_in_pack_object_header() take
different signedness.
1. https://lore.kernel.org/git/211213.86bl1l9bfz.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hash_object_file() function added in abdc3fc842 (Add
hash_sha1_file(), 2006-10-14) did not have a meaningful return value,
and it never has.
One was seemingly added to avoid adding braces to the "ret = "
assignments being modified here. Let's instead assign "0" to the "ret"
variables at the beginning of the relevant functions, and have them
return "void".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the declaration of the "ret" and "re_allocated"
variables. It's not our usual style to group variable declarations
simply because they share a type, we'd only prefer to do so when the
two are closely related (e.g. "int i, j"). This change makes a
subsequent and meaningful change's diff smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Messages "ort" merge backend prepares while dealing with conflicted
paths were unnecessarily confusing since it did not differentiate
inner merges and outer merges.
* en/ort-inner-merge-conflict-report:
merge-ort: make informational messages from recursive merges clearer
Workaround we have for versions of PCRE2 before their version 10.36
were in effect only for their versions newer than 10.36 by mistake,
which has been corrected.
* rs/pcre-invalid-utf8-fix-fix:
grep: fix triggering PCRE2_NO_START_OPTIMIZE workaround
Setting core.untrackedCache to true failed to add the untracked
cache extension to the index.
* ds/core-untracked-cache-config:
dir: force untracked cache with core.untrackedCache
Plug (some) memory leaks around parse_date_format().
* ab/date-mode-release:
date API: add and use a date_mode_release()
date API: add basic API docs
date API: provide and use a DATE_MODE_INIT
date API: create a date.h, split from cache.h
cache.h: remove always unused show_date_human() declaration
Some code clean-up in the "git grep" machinery.
* ab/grep-patterntype:
grep: simplify config parsing and option parsing
grep.c: do "if (bool && memchr())" not "if (memchr() && bool)"
grep.h: make "grep_opt.pattern_type_option" use its enum
grep API: call grep_config() after grep_init()
grep.c: don't pass along NULL callback value
built-ins: trust the "prefix" from run_builtin()
grep tests: add missing "grep.patternType" config tests
grep tests: create a helper function for "BRE" or "ERE"
log tests: check if grep_config() is called by "log"-like cmds
grep.h: remove unused "regex_t regexp" from grep_opt
"git clone --filter=... --recurse-submodules" only makes the
top-level a partial clone, while submodules are fully cloned. This
behaviour is changed to pass the same filter down to the submodules.
* js/apply-partial-clone-filters-recursively:
clone, submodule: pass partial clone filters to submodules
Unify more messages to help l10n.
* ja/i18n-common-messages:
i18n: fix some misformated placeholders in command synopsis
i18n: remove from i18n strings that do not hold translatable parts
i18n: factorize "invalid value" messages
i18n: factorize more 'incompatible options' messages
Further tweaks on progress API.
* ab/only-single-progress-at-once:
pack-bitmap-write.c: don't return without stop_progress()
progress API: unify stop_progress{,_msg}(), fix trace2 bug
progress.c: refactor stop_progress{,_msg}() to use helpers
progress.c: use dereferenced "progress" variable, not "(*p_progress)"
progress.h: format and be consistent with progress.c naming
progress.c tests: test some invalid usage
progress.c tests: make start/stop commands on stdin
progress.c test helper: add missing braces
leak tests: fix a memory leak in "test-progress" helper
"git sparse-checkout" wants to work with per-worktree configuration,
but did not work well in a worktree attached to a bare repository.
* ds/sparse-checkout-requires-per-worktree-config:
config: make git_configset_get_string_tmp() private
worktree: copy sparse-checkout patterns and config on add
sparse-checkout: set worktree-config correctly
config: add repo_config_set_worktree_gently()
worktree: create init_worktree_config()
Documentation: add extensions.worktreeConfig details
Error output given in response to an ambiguous object name has been
improved.
* ab/ambiguous-object-name:
object-name: re-use "struct strbuf" in show_ambiguous_object()
object-name: iterate ambiguous objects before showing header
object-name: show date for ambiguous tag objects
object-name: make ambiguous object output translatable
object-name: explicitly handle bad tags in show_ambiguous_object()
object-name: explicitly handle OBJ_BAD in show_ambiguous_object()
object-name tests: add tests for ambiguous object blind spots
Change a few existing non-designated initializer assignments to use
"partial" designated initializer assignments. I.e. we're now omitting
the "NULL" or "0" fields and letting the initializer take care of them
for us.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "struct refspec_item" at the top of refspec.c to use
designated initializers. Let's keep the "= 0" assignments for
self-documentation purposes, even though they're now redundant.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "struct stream_filter_vtbl" and "struct stream_filter"
assignments in convert.c to use designated initializers.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "struct userdiff_driver" assignmentns to use designated
initializers, but let's keep the PATTERNS() and IPATTERN() convenience
macros to avoid churn, but have them defined in terms of designated
initializers.
For the "driver_true" and "driver_false" let's have the compiler
implicitly initialize most of the fields, but let's leave a redundant
".binary = 0" for "driver_true" to make it obvious that it's the
opposite of the the ".binary = 1" for "driver_false".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with the preceding commit, change another file-level struct
assignment to use designated initializers.
Retain the ".name = NULL" etc. in the case of the first element of
"unknown hash algorithm", to make it explicit that we're intentionally
not setting those, it's not just that we forgot.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the "static struct tr2_dst" assignments in trace2/* to use
designated initializers. I don't think it improves readability to
include the explicit 0-ing out of the
fd/initialized/need_close/too_many_files members, so let's have those
be initialized implicitly by the compiler.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with the preceding commit, change another set of file-level struct
assignments to use designated initializers.
As before the "= NULL" assignments are redundant, but we're keeping
them for self-documentation purposes. The comments left to explain the
pre-image can now be removed in favor of working code that relays the
same information to the reader.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cut down a lot on the verbosity of the "server" assignment in
imap-send.c using designated initializers, only the "ssl_verify"
member was being set to a non-NULL non-0 value.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When generating a message for a stash, "git stash" only records the
part of the branch name to the right of the last "/". e.g. if HEAD is at
"foo/bar/baz", "git stash" generates a message prefixed with "WIP on
baz:" instead of "WIP on foo/bar/baz:".
Fix this by using skip_prefix() to skip "refs/heads/" instead of looking
for the last instance of "/".
Reported-by: Kraymer <kraymer@gmail.com>
Reported-by: Daniel Hahler <git@thequod.de>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a small courtesy to users, report what limit was breached. This
is especially useful when a push exceeds a server-defined limit, since
the user is unlikely to have configured the limit (their host did).
Also demonstrate the human-readable message in a test.
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Matt Cooper <vtbassmatt@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --graph --graph" used to leak a graph structure, and there
was no way to countermand "--graph" that appear earlier on the
command line. A "--no-graph" option has been added and resource
leakage has been plugged.
* ah/log-no-graph:
log: add a --no-graph option
log: fix memory leak if --graph is passed multiple times
Fix tests that are unnecessarily specific to ref-files backend.
* hw/t1410-adjust-test-for-reftable:
t1410: mark bufsize boundary test as REFFILES
t1410: use test-tool ref-store to inspect reflogs
A couple of optimization to "git fetch".
* ps/fetch-optim-with-commit-graph:
fetch: skip computing output width when not printing anything
fetch-pack: use commit-graph when computing cutoff
e77aa336f1 ("ls-files: optionally recurse into submodules", 2016-10-10)
taught ls-files the --recurse-submodules argument, but only in a limited
set of circumstances. In particular, --stage was unsupported, perhaps
because there was no repo_find_unique_abbrev(), which was only
introduced in 8bb95572b0 ("sha1-name.c: add
repo_find_unique_abbrev_r()", 2019-04-16). This function is needed for
using --recurse-submodules with --stage.
Now that we have repo_find_unique_abbrev(), teach support for this
combination of arguments.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test_path_is_file_not_symlink(), test_path_is_dir_not_symlink()
and test_path_is_symlink(). Case of use for the first one
in test t/t3903-stash.sh to replace "test -f" because that function
explicitly want the file not to be a symlink.
Give more friendly error message.
Signed-off-by: COGONI Guillaume <cogoni.guillaume@gmail.com>
Co-authored-by: BRESSAT Jonathan <git.jonathan.bressat@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test_path_is_* to replace test [-d|-f] because that give more
explicit debugging information. And it doesn't change the semantics.
Signed-off-by: COGONI Guillaume <cogoni.guillaume@gmail.com>
Co-authored-by: BRESSAT Jonathan <git.jonathan.bressat@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usage strings for git (sub)command flags has a style guide that
suggests - first letter should not capitalized (unless required)
and it should skip full-stop at the end of line. But there are
some files where usage-strings do not follow the above mentioned
guide.
Amend the usage strings that don't follow the style convention/guide.
Signed-off-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a formatting regression in 1b81d8cb19 (help: use command-list.txt
for the source of guides, 2018-05-20). Adjust the output of "git help
--guides" and any other future single-section commands so that a
newline isn't inserted before the only section being printed.
This changes the output from:
$ git help --guides
The Git concept guides are:
[...]
To:
$ git help --guides
The Git concept guides are:
[...]
That we started printing an extra "\n" in 1b81d8cb19 wasn't intended,
but an emergent effect of moving all of the printing of "git help"
output to code that was ready to handle printing N sections.
With 1b81d8cb19 we started using the "print_cmd_by_category()"
function added earlier in the same series, or in cfb22a02ab (help:
use command-list.h for common command list, 2018-05-10).
Fixing this formatting nit is easy enough. Let's have all of the
output that would like to be "\n"-separated from other lines emit its
own "\n". We then adjust "print_cmd_by_category()" to only print a
"\n" to delimit the sections it's printing out.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the ability to only emit git's own usage information under
--all. This also allows us to extend the "test_section_spacing" tests
added in a preceding commit to test "git help --all"
output.
Previously we could not do that, as the tests might find a git-*
command in the "$PATH", which would make the output differ from one
setup to another.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add more sanity checking to "git help" usage by erroring out if these
man viewer options are combined with incompatible command-modes that
will never use these documentation viewers.
This continues the work started in d35d03cf93 (help: simplify by
moving to OPT_CMDMODE(), 2021-09-22) of adding more sanity checking to
"git help". Doing this allows us to clarify the "SYNOPSIS" in the
documentation, and the "git help -h" output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do the same for the "--all" option that I did for "--guides" in
9856ea6785 (help: correct usage & behavior of "git help --guides",
2021-09-22). I.e. we've documented it as ignoring non-option
arguments, let's have it error out instead.
As with other changes made in 62f035aee3 (Merge branch
'ab/help-config-vars', 2021-10-13) this is technically a change in
behavior, but in practice it's just a bug fix. We were ignoring this
before, but by erroring we can simplify our documentation and
synopsis, as well as avoid user confusion as they wonder what the
difference between e.g. "git help --all" and "git help --all status"
is (there wasn't any difference).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the errors added in d35d03cf93 (help: simplify by moving to
OPT_CMDMODE(), 2021-09-22) to quote the offending option at the user
when invoked as e.g.:
git help --guides garbage
Now instead of:
fatal: this option doesn't take any other arguments
We'll emit:
fatal: the '--guides' option doesn't take any non-option arguments
Let's also rename the function, as it will be extended to do other
checks that aren't "no extra argc" in a subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the listing of commands and aliases from
list_all_cmds_help(). This will make a subsequent functional change
smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's logic in "help.c"'s "print_cmd_by_category()" to emit "help"
output with particular spacing, which doesn't make much sense when
emitting only one section with "help -g".
Let's add tests for the current spacing in preparation for a
subsequent whitespace formatting fix, and make sure that that fix
doesn't cause regressions for the "git" and "git help" output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code in "help.c" that used printf_ln() without format
specifiers to use puts() instead, as other existing code in the file
does. Let's also change related code to use puts() instead of the
equivalent of calling "printf" with a "%s\n" format.
This formatting-only change will make a subsequent functional change
easier to read, as it'll be changing code that's consistently using
the same functions to do the same things.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a missing "]" to documentation added in 63eae83f8f (help: add "-a
--verbose" to list all commands with synopsis, 2018-05-20). This made
it seem as though "--[no-]verbose" can only be provided with "--all",
not "-a". The corresponding usage information in the C
code ("builtin_help_usage") does not have the same problem.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is part of the reftable API, so it should use the
reftable_ prefix
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ID => ref map is trimming object IDs to a disambiguating prefix.
Check that we are computing their length correctly.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing the same hash many times, we might decide to use a
length-1 object ID prefix for the ObjectID => ref table, which is out
of spec.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The public interface (reftable_writer) already ensures that keys are
written in strictly increasing order, and an empty key by definition
fails this check.
However, by also enforcing this at the block layer, it is easier to
verify that records (which are written into blocks) never have to
consider the possibility of empty keys.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Empty keys can only be written as ref records with empty names. The
log record has a logical timestamp in the key, so the key is never
empty.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The spec says 2 <= object_id_len <= 31. We are lenient and allow 1,
but we forbid 0, so we can be sure that we never read a 0-length key.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The value is stored in a 5-bit field, so we can't support more without
a format version upgrade.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The builtin "add -p" reads the key "F2" as three separate keys "^[",
"O" and "Q". The "Q" causes it to quit which is probably not what the
user was expecting. This is because it uses poll() to check for
pending input when reading escape sequences but reads the input with
getchar() which is buffered by default and so hoovers up all the
pending input leading poll() think there isn't anything pending. Fix
this by calling setbuf() to disable input buffering if
interactive.singlekey is set.
Looking at the comment above mingw_getchar() in terminal.c I wonder if
that function is papering over this bug and could be removed.
Unfortunately I don't have access to windows to test that.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If VMIN and VTIME are both set to zero then the terminal performs
non-blocking reads which means that read_key_without_echo() returns
EOF if there is no key press pending. This results in the user being
unable to select anything when running "git add -p". Fix this by
explicitly setting VMIN and VTIME when enabling non-canonical mode.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When disable_bits() changes the terminal attributes it uses
sigchain_push_common() to restore the terminal if a signal is received
before restore_term() is called. However there is no corresponding
call to sigchain_pop_common() when the settings are restored so the
signal handler is left on the sigchain stack. This leaves the stack
unbalanced so code such as
sigchain_push_common(my_handler);
...
read_key_without_echo(...);
...
sigchain_pop_common();
pops the handler pushed by disable_bits() rather than the one it
intended to. Additionally "git add -p" changes the terminal settings
every time it reads a key press so the stack can grow significantly.
In order to fix this save_term() now sets up the signal handler so
restore_term() can unconditionally call sigchain_pop_common(). There
are no callers of save_term() outside of terminal.c as the only
external caller was removed by e3f7e01b50 ("Revert "editor: save and
reset terminal after calling EDITOR"", 2021-11-22). Any future callers
of save_term() should benefit from having the signal handler set up
for them.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Break out of the loop to ensure restore_term() is called before
returning.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pipes ignore error codes of LHS command and thus we should not use them
with Git in tests. As an alternative, use a 'tmp' file to write the Git
output so we can test the exit code.
Signed-off-by: Shubham Mishra <shivam828787@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is helpful to distinguish between a 'working tree' and a 'worktree'.
A worktree contains a working tree plus additional metadata. This
metadata includes per-worktree refs and worktree-specific config.
This is the last of multiple changes to git-worktree.txt, starting at
the LIST OUTPUT FORMAT section.
The EXAMPLES section has an instance of "working tree" that must stay as
it is, because it is not talking about a worktree, but an example of why
a user might want to create a worktree.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is helpful to distinguish between a 'working tree' and a 'worktree'.
A worktree contains a working tree plus additional metadata. This
metadata includes per-worktree refs and worktree-specific config.
This is the sixth of multiple changes to git-worktree.txt, restricted to
the DETAILS section.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is helpful to distinguish between a 'working tree' and a 'worktree'.
A worktree contains a working tree plus additional metadata. This
metadata includes per-worktree refs and worktree-specific config.
This is the fifth of multiple changes to git-worktree.txt, restricted to
the CONFIGURATION FILE section.
While here, clear up some language to improve readability.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is helpful to distinguish between a 'working tree' and a 'worktree'.
A worktree contains a working tree plus additional metadata. This
metadata includes per-worktree refs and worktree-specific config.
This is the fourth of multiple changes to git-worktree.txt, restricted
to the REFS section.
This section previously described "per working tree" refs but they are
now replaced with "per-worktree" refs, which matches the definition in
glossary-content.txt.
The first paragraph of this section was also a bit confusing, so it is
cleaned up to make it easier to understand.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is helpful to distinguish between a 'working tree' and a 'worktree'.
A worktree contains a working tree plus additional metadata. This
metadata includes per-worktree refs and worktree-specific config.
This is the third of multiple changes to git-worktree.txt, restricted to
the OPTIONS section.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is helpful to distinguish between a 'working tree' and a 'worktree'.
A worktree contains a working tree plus additional metadata. This
metadata includes per-worktree refs and worktree-specific config.
This is the second of multiple changes to git-worktree.txt, restricted
to the COMMANDS section.
There is some language around the movement of "the working tree of a
linked worktree" which is used once, but the remaining uses are left as
just moving "a linked worktree" for brevity.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is helpful to distinguish between a 'working tree' and a 'worktree'.
A worktree contains a working tree plus additional metadata. This
metadata includes per-worktree refs and worktree-specific config.
This is the first of multiple changes to git-worktree.txt, restricted to
the DESCRIPTION section.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ability to add the --no-checkout flag to 'git worktree' was added in
ef2a0ac9a0 (worktree: add: introduce --checkout option, 2016-03-29).
Recently, we noticed that add_worktree() is rather complicated, so
extract the logic for this checkout process to simplify the method.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This logic was introduced by 5325591 (worktree: copy sparse-checkout
patterns and config on add, 2022-02-07), but some feedback came in that
the add_worktree() method was already too complex. It is better to
extract this logic into a helper method to reduce this complexity.
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This logic was introduced by 5325591 (worktree: copy sparse-checkout
patterns and config on add, 2022-02-07), but some feedback came in that
the add_worktree() method was already too complex. It is better to
extract this logic into a helper method to reduce this complexity.
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two messages differ only by the config key name, which should not
be translated. Extract those keys so the messages can be translated from
the same string.
Reported-by: Jean-Noël AVILA <jn.avila@free.fr>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the "else" branches of the HAVE_VARIADIC_MACROS macro, which
have been unconditionally omitted since 765dc16888 (git-compat-util:
always enable variadic macros, 2021-01-28).
Since were always omitted, anyone trying to use a compiler without
variadic macro support to compile a git since version
git v2.31.0 or later would have had a compilation error. 10 months
across a few releases since then should have been enough time for
anyone who cared to run into that and report the issue.
In addition to that, for anyone unsetting HAVE_VARIADIC_MACROS we've
been emitting extremely verbose warnings since at least
ee4512ed48 (trace2: create new combined trace facility,
2019-02-22). That's because there is no such thing as a
"region_enter_printf" or "region_leave_printf" format, so at least
under GCC and Clang everything that includes trace.h (almost every
file) emits a couple of warnings about that.
There's a large benefit to being able to have a hard dependency rely
on variadic macros, the code surrounding usage.c is hard to maintain
if we need to write two implementations of everything, and by relying
on "__FILE__" and "__LINE__" along with "__VA_ARGS__" we can in the
future make error(), die() etc. log where they were called from. We've
also recently merged d67fc4bf0b (Merge branch 'bc/require-c99',
2021-12-10) which further cements our hard dependency on C99.
So let's delete the fallback code, and update our CodingGuidelines to
note that we depend on this. The added bullet-point starts with
lower-case for consistency with other bullet-points in that section.
The diff in "trace.h" is relatively hard to read, since we need to
retain the existing API docs, which were comments on the code used if
HAVE_VARIADIC_MACROS was not defined.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a comment added in e208f9cc75 (make error()'s constant return
value more visible, 2012-12-15). It's not correct that this is GCC-ism
anymore, it's code that uses standard C99 features.
The comment being changed here pre-dates the HAVE_VARIADIC_MACROS
define, which we got in e05bed960d (trace: add 'file:line' to all
trace output, 2014-07-12).
The original implementation of an error() macro) in e208f9cc75 used a
GCC-ism with the paste operator (see the commit message for mention of
it), but that was dropped later by 9798f7e5f9 (Use __VA_ARGS__ for all
of error's arguments, 2013-02-08), giving us the C99-portable version
we have now.
While we could remove the __GNUC__ define here, it might cause issues
for other compilers or static analysis systems, so let's not. See
87fe5df365 (inline constant return from error() function, 2014-05-06)
for one such issue.
See also e05bed960d (trace: add 'file:line' to all trace output,
2014-07-12) for another comment about GNUC's handling of __VA_ARGS__.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The struct strmap paths member of merge_options_internal is perhaps the
most central data structure to all of merge-ort. Because all the paths
involved in the merge need to be kept until the merge is complete, this
"paths" data structure traditionally took responsibility for owning all
the allocated paths. When the merge is over, those paths were free()d
as part of free()ing this strmap.
In commit 6697ee01b5 (merge-ort: switch our strmaps over to using
memory pools, 2021-07-30), we changed the allocations for pathnames to
come from a memory pool. That meant the ownership changed slightly;
there were no individual free() calls to make, instead the memory pool
owned all those paths and they were free()d all at once.
Unfortunately unique_path() was written presuming the pre-memory-pool
model, and allocated a path on the heap and left it in the strmap for
later free()ing. Modify it to return a path allocated from the memory
pool instead.
Note that there's one instance -- in record_conflicted_index_entries()
-- where the returned string from unique_path() was only used very
temporarily and thus had been immediately free()'d. This codepath was
associated with an ugly skip-worktree workaround that has since been
better fixed by the in-flight en/present-despite-skipped topic. This
workaround probably makes sense to excise once that topic merges down,
but for now, just remove the immediate free() and allow the returned
string to be free()d when the memory pool is released.
This fixes the following memory leak as reported by valgrind:
==PID== 65 bytes in 1 blocks are definitely lost in loss record 79 of 134
==PID== at 0xADDRESS: malloc
==PID== by 0xADDRESS: realloc
==PID== by 0xADDRESS: xrealloc (wrapper.c:126)
==PID== by 0xADDRESS: strbuf_grow (strbuf.c:98)
==PID== by 0xADDRESS: strbuf_vaddf (strbuf.c:394)
==PID== by 0xADDRESS: strbuf_addf (strbuf.c:335)
==PID== by 0xADDRESS: unique_path (merge-ort.c:733)
==PID== by 0xADDRESS: process_entry (merge-ort.c:3678)
==PID== by 0xADDRESS: process_entries (merge-ort.c:4037)
==PID== by 0xADDRESS: merge_ort_nonrecursive_internal (merge-ort.c:4621)
==PID== by 0xADDRESS: merge_ort_internal (merge-ort.c:4709)
==PID== by 0xADDRESS: merge_incore_recursive (merge-ort.c:4760)
==PID== by 0xADDRESS: merge_ort_recursive (merge-ort-wrappers.c:57)
==PID== by 0xADDRESS: try_merge_strategy (merge.c:753)
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
detect_and_process_renames() detects renames on both sides of history
and then combines these into a single diff_queue_struct. The combined
diff_queue_struct needs to be able to hold the renames found on either
side, and since it knows the (maximum) size it needs, it pre-emptively
grows the array to the appropriate size:
ALLOC_GROW(combined.queue,
renames->pairs[1].nr + renames->pairs[2].nr,
combined.alloc);
It then collects the items from each side:
collect_renames(opt, &combined, MERGE_SIDE1, ...)
collect_renames(opt, &combined, MERGE_SIDE2, ...)
Note, though, that collect_renames() sometimes determines that some
pairs are unnecessary and does not include them in the combined array.
When it is done, detect_and_process_renames() frees this memory:
if (combined.nr) {
...
free(combined.queue);
}
The problem is that sometimes even when there are pairs, none of them
are necessary. Instead of checking combined.nr, just remove the
if-check; free() knows to skip NULL pointers. This change fixes the
following memory leak, as reported by valgrind:
==PID== 192 bytes in 1 blocks are definitely lost in loss record 107 of 134
==PID== at 0xADDRESS: malloc
==PID== by 0xADDRESS: realloc
==PID== by 0xADDRESS: xrealloc (wrapper.c:126)
==PID== by 0xADDRESS: detect_and_process_renames (merge-ort.c:3134)
==PID== by 0xADDRESS: merge_ort_nonrecursive_internal (merge-ort.c:4610)
==PID== by 0xADDRESS: merge_ort_internal (merge-ort.c:4709)
==PID== by 0xADDRESS: merge_incore_recursive (merge-ort.c:4760)
==PID== by 0xADDRESS: merge_ort_recursive (merge-ort-wrappers.c:57)
==PID== by 0xADDRESS: try_merge_strategy (merge.c:753)
==PID== by 0xADDRESS: cmd_merge (merge.c:1676)
==PID== by 0xADDRESS: run_builtin (git.c:461)
==PID== by 0xADDRESS: handle_builtin (git.c:713)
==PID== by 0xADDRESS: run_argv (git.c:780)
==PID== by 0xADDRESS: cmd_main (git.c:911)
==PID== by 0xADDRESS: main (common-main.c:52)
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In sparse-checkout add/set under cone mode, the arguments passed are
supposed to be directories rather than gitignore-style patterns.
However, given the amount of effort spent in the manual discussing
patterns, it is easy for users to assume they need to pass patterns such
as
/foo/*
or
!/bar/*/
or perhaps they really do ignore the directory rule and specify a
random gitignore-style pattern like
*.c
To help catch such mistakes, throw an error if any of the positional
arguments:
* starts with any of '/!'
* contains any of '*?[]'
Inform users they can pass --skip-checks if they have a directory that
really does have such special characters in its name. (We exclude '\'
because of sparse-checkout's special handling of backslashes; see
the MINGW test in t1091.46.)
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The set and add subcommands accept multiple positional arguments.
The meaning of these arguments differs slightly in the two modes:
Cone mode only accepts directories. If given a file, it would
previously treat it as a directory, causing not just the file itself to
be included but all sibling files as well -- likely against users'
expectations. Throw an error if the specified path is a file in the
index. Provide a --skip-checks argument to allow users to override
(e.g. for the case when the given path IS a directory on another
branch).
Non-cone mode accepts general gitignore patterns. There are many
reasons to avoid this mode, but one possible reason to use it instead of
cone mode: to be able to select individual files within a directory.
However, if a file is passed to set/add in non-cone mode, you won't be
selecting a single file, you'll be selecting a file with the same name
in any directory. Thus users will likely want to prefix any paths they
specify with a leading '/' character; warn users if the patterns they
specify exactly name a file because it means they are likely missing
such a leading slash.
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cone mode, non-option arguments to set & add are clearly paths, and
as such, we should pay attention to prefix.
In non-cone mode, it is not clear that folks intend to provide paths
since the inputs are gitignore-style patterns. Paying attention to
prefix would prevent folks from doing things like
git sparse-checkout add /.gitattributes
git sparse-checkout add '/toplevel-dir/*'
In fact, the former will result in
fatal: '/.gitattributes' is outside repository...
while the later will result in
fatal: Invalid path '/toplevel-dir': No such file or directory
despite the fact that both are valid gitignore-style patterns that would
select real files if added to the sparse-checkout file. This might lead
people to just use the path without the leading slash, potentially
resulting in them grabbing files with the same name throughout the
directory hierarchy contrary to their expectations. See also [1] and
[2]. Adding prefix seems to just be fraught with error; so for now
simply throw an error in non-cone mode when sparse-checkout set/add are
run from a subdirectory.
[1] https://lore.kernel.org/git/e1934710-e228-adc4-d37c-f706883bd27c@gmail.com/
[2] https://lore.kernel.org/git/CABPp-BHXZ-XLxY0a3wCATfdq=6-EjW62RzbxKAoFPeXfJswD2w@mail.gmail.com/
Helped-by: Junio Hamano <gitster@pobox.com>
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit f2e3a218e8 ("sparse-checkout: enable `set` to initialize
sparse-checkout mode", 2021-12-14) made the `set` command able to
initialize sparse-checkout mode, but it also had to function when
sparse-checkout mode was already setup and the user just wanted to
change the sparsity paths. So, if the user passed --cone or --no-cone,
then we should override the current setting, but if they didn't pass
either, we should use whatever the current cone mode setting is.
Unfortunately, there was a small error in the logic in that it would not
set the in-memory cone mode value (core_sparse_checkout_one) when
--no-cone was specified, but since it did set the config setting on
disk, any subsequent git invocation would correctly get non-cone mode.
As such, the error did not previously matter. However, a subsequent
commit will add some logic that depends on core_sparse_checkout_cone
being set to the correct mode, so make sure it is set consistently with
the config values we will be writing to disk.
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 4e256731d6 ("sparse-checkout: enable reapply to take
--[no-]{cone,sparse-index}", 2021-12-14) made it so that reapply could
take additional options but added no tests. Tests would have shown that
the feature doesn't work because the initial values are set AFTER
parsing the command line options instead of before. Add a test and set
the initial value at the appropriate time.
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Indent the here-docs and use "test_cmp" instead of "diff" in tests
added in ec55559f93 (push: Add support for pre-push hooks,
2013-01-13). Let's also use the more typical "expect" instead of
"expected" to be consistent with the rest of the test file.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the tests added in ec55559f93 (push: Add support for pre-push
hooks, 2013-01-13) to exhaustively test for the exact input we're
expecting. This ensures that we e.g. don't miss a trailing newline.
Appending to a file called "actual" is the established convention in
this test for hooks, see the rest of the tests added in
ec55559f93 (push: Add support for pre-push hooks, 2013-01-13). Let's
follow that convention here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"working tree" and "per-worktree ref" were in glossary, but
"worktree" itself wasn't, which has been corrected.
* jc/glossary-worktree:
glossary: describe "worktree"
"git cmd -h" outside a repository should error out cleanly for many
commands, but instead it hit a BUG(), which has been corrected.
* js/short-help-outside-repo-fix:
t0012: verify that built-ins handle `-h` even without gitdir
checkout/fetch/pull/pack-objects: allow `-h` outside a repository
When there is no object to write .bitmap file for, "git
multi-pack-index" triggered an error, instead of just skipping,
which has been corrected.
* tb/midx-no-bitmap-for-no-objects:
midx: prevent writing a .bitmap without any objects
"git branch" learned the "--recurse-submodules" option.
* gc/branch-recurse-submodules:
branch.c: use 'goto cleanup' in setup_tracking() to fix memory leaks
branch: add --recurse-submodules option for branch creation
builtin/branch: consolidate action-picking logic in cmd_branch()
branch: add a dry_run parameter to create_branch()
branch: make create_branch() always create a branch
branch: move --set-upstream-to behavior to dwim_and_setup_tracking()
Because a deletion of ref would need to remove it from both the
loose ref store and the packed ref store, a delete-ref operation
that logically removes one ref may end up invoking ref-transaction
hook twice, which has been corrected.
* ps/avoid-unnecessary-hook-invocation-with-packed-refs:
refs: skip hooks when deleting uncovered packed refs
refs: do not execute reference-transaction hook on packing refs
refs: demonstrate excessive execution of the reference-transaction hook
refs: allow skipping the reference-transaction hook
refs: allow passing flags when beginning transactions
refs: extract packed_refs_delete_refs() to allow control of transaction
Use an internal call to reset_head() helper function instead of
spawning "git checkout" in "rebase", and update code paths that are
involved in the change.
* pw/use-in-process-checkout-in-rebase:
rebase -m: don't fork git checkout
rebase --apply: set ORIG_HEAD correctly
rebase --apply: fix reflog
reset_head(): take struct rebase_head_opts
rebase: cleanup reset_head() calls
create_autostash(): remove unneeded parameter
reset_head(): make default_reflog_action optional
reset_head(): factor out ref updates
reset_head(): remove action parameter
rebase --apply: don't run post-checkout hook if there is an error
rebase: do not remove untracked files on checkout
rebase: pass correct arguments to post-checkout hook
t5403: refactor rebase post-checkout hook tests
rebase: factor out checkout for up to date branch
"receive-pack" checks if it will do any ref updates (various
conditions could reject a push) before received objects are taken
out of the temporary directory used for quarantine purposes, so
that a push that is known-to-fail will not leave crufts that a
future "gc" needs to clean up.
* cb/clear-quarantine-early-on-all-ref-update-errors:
receive-pack: purge temporary data if no command is ready to run
As part of our code of conduct, we maintain a list of active members on
the Project Leadership Committee, which serves a couple of purposes. The
details are in 3f9ef874a7 (CODE_OF_CONDUCT: mention individual
project-leader emails, 2019-09-26), but the gist is as follows:
- It makes it clear that people with a CoC complaint may contact
members individually as opposed to the general PLC list (in case the
subject of their complaint has to do with one of the committee
members).
- It also serves as the de-facto list of people on the PLC, which
isn't committed anywhere else in the tree.
As of [1], Peff is no longer a member of Git's Project Leadership
Committee. Let's update the list of active members accordingly [2].
This also gives us a convenient opportunity to thank Peff for his many
years of service on the PLC, during which he helped the Git community in
more ways than we can easily list here.
[1]: https://lore.kernel.org/git/YboaAe4LWySOoAe7@coredump.intra.peff.net/
[2]: https://lore.kernel.org/git/CAP8UFD2XxP9r3PJ4GQjxUbV=E1ASDq1NDgB-h+S=v-bZQ7DYwQ@mail.gmail.com/
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new flag --batch-command that accepts commands and arguments
from stdin, similar to git-update-ref --stdin.
At GitLab, we use a pair of long running cat-file processes when
accessing object content. One for iterating over object metadata with
--batch-check, and the other to grab object contents with --batch.
However, if we had --batch-command, we wouldn't need to keep both
processes around, and instead just have one --batch-command process
where we can flip between getting object info, and getting object
contents. Since we have a pair of cat-file processes per repository,
this means we can get rid of roughly half of long lived git cat-file
processes. Given there are many repositories being accessed at any given
time, this can lead to huge savings.
git cat-file --batch-command
will enter an interactive command mode whereby the user can enter in
commands and their arguments that get queued in memory:
<command1> [arg1] [arg2] LF
<command2> [arg1] [arg2] LF
When --buffer mode is used, commands will be queued in memory until a
flush command is issued that execute them:
flush LF
The reason for a flush command is that when a consumer process (A)
talks to a git cat-file process (B) and interactively writes to and
reads from it in --buffer mode, (A) needs to be able to control when
the buffer is flushed to stdout.
Currently, from (A)'s perspective, the only way is to either
1. kill (B)'s process
2. send an invalid object to stdin.
1. is not ideal from a performance perspective as it will require
spawning a new cat-file process each time, and 2. is hacky and not a
good long term solution.
With this mechanism of queueing up commands and letting (A) issue a
flush command, process (A) can control when the buffer is flushed and
can guarantee it will receive all of the output when in --buffer mode.
--batch-command also will not allow (B) to flush to stdout until a flush
is received.
This patch adds the basic structure for adding command which can be
extended in the future to add more commands. It also adds the following
two commands (on top of the flush command):
contents <object> LF
info <object> LF
The contents command takes an <object> argument and prints out the object
contents.
The info command takes an <object> argument and prints out the object
metadata.
These can be used in the following way with --buffer:
info <object> LF
contents <object> LF
contents <object> LF
info <object> LF
flush LF
info <object> LF
flush LF
When used without --buffer:
info <object> LF
contents <object> LF
contents <object> LF
info <object> LF
info <object> LF
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
maybe_remove_timestamp() takes arguments, but it would be useful to have
a function that reads from stdin and strips the timestamp. This would
allow tests to pipe data into a function to remove timestamps, and
wouldn't have to always assign a variable. This is especially helpful
when the data is multiple lines.
Keep maybe_remove_timestamp() the same, but add a remove_timestamp
helper that reads from stdin.
The tests in the next patch will make use of this.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future patch introduces a new --batch-command flag. Including --batch
and --batch-check, we will have a total of three batch modes. print_contents
is the only boolean on the batch_options sturct used to distinguish
between the different modes. This makes the code harder to read.
To reduce potential confusion, replace print_contents with an enum to
help readability and clarity.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next patch, we will add an enum on the batch_options struct that
indicates which type of batch operation will be used: --batch,
--batch-check and the soon to be --batch-command that will read
commands from stdin. --batch-command mode might get confused with
the cmdmode flag.
There is value in renaming cmdmode in any case. cmdmode refers to how
the result output of the blob will be transformed, either according to
--filter or --textconv. So transform_mode is a more descriptive name
for the flag.
Rename cmdmode to transform_mode in cat-file.c
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line completion script (in contrib/) learned to
complete all Git subcommands, including the ones that are normally
hidden, when GIT_COMPLETION_SHOW_ALL_COMMANDS is used.
* ab/complete-show-all-commands:
completion: add a GIT_COMPLETION_SHOW_ALL_COMMANDS
completion tests: re-source git-completion.bash in a subshell
Style updates on a test script helper.
* sy/modernize-t-lib-read-tree-m-3way:
t/lib-read-tree-m-3way: indent with tabs
t/lib-read-tree-m-3way: modernize style
"git update-index", "git checkout-index", and "git clean" are
taught to work better with the sparse checkout feature.
* vd/sparse-clean-etc:
update-index: reduce scope of index expansion in do_reupdate
update-index: integrate with sparse index
update-index: add tests for sparse-checkout compatibility
checkout-index: integrate with sparse index
checkout-index: add --ignore-skip-worktree-bits option
checkout-index: expand sparse checkout compatibility tests
clean: integrate with sparse index
reset: reorder wildcard pathspec conditions
reset: fix validation in sparse index test
"git log" and friends learned an option --exclude-first-parent-only
to propagate UNINTERESTING bit down only along the first-parent
chain, just like --first-parent option shows commits that lack the
UNINTERESTING bit only along the first-parent chain.
* jz/rev-list-exclude-first-parent-only:
git-rev-list: add --exclude-first-parent-only flag
Unlike "git apply", "git patch-id" did not handle patches with
hunks that has only 1 line in either preimage or postimage, which
has been corrected.
* jz/patch-id-hunk-header-parsing-fix:
patch-id: fix scan_hunk_header on diffs with 1 line of before/after
patch-id: fix antipatterns in tests
Prepare more test scripts for the introduction of reftable.
* hn/reftable-tests:
t5312: prepare for reftable
t1405: mark test that checks existence as REFFILES
t1405: explictly delete reflogs for reftable
When "git subtree" wants to create a merge, it used "git merge" and
let it be affected by end-user's "merge.ff" configuration, which
has been corrected.
* tk/subtree-merge-not-ff-only:
subtree: force merge commit
This is another simple change with a long explanation...
merge-recursive and merge-ort are both based on the same recursive idea:
if there is more than one merge base, merge the merge bases (which may
require first merging the merge bases of the merges bases, etc.). The
depth of the inner merge is recorded via a variable called "call_depth",
which we'll bring up again later. Naturally, the inner merges
themselves can have conflicts and various messages generated about those
files.
merge-recursive immediately prints to stdout as it goes, at the risk of
printing multiple conflict notices for the same path separated far apart
from each other with many intervenining conflict notices for other paths
between them. And this is true even if there are no inner merges
involved. An example of this was given in [1] and apparently caused
some confusion:
CONFLICT (rename/add): Rename A->B in HEAD. B added in otherbranch
...dozens of conflicts for OTHER paths...
CONFLICT (content): Merge conflicts in B
In contrast, merge-ort collects messages and stores them by path so that
it can print them grouped by path. Thus, the same case handled by
merge-ort would have output of the form:
CONFLICT (rename/add): Rename A->B in HEAD. B added in otherbranch
CONFLICT (content): Merge conflicts in B
...dozens of conflicts for OTHER paths...
This is generally helpful, but does make a separate bug more
problematic. In particular, while merge-recursive might report the
following for a recursive merge:
Auto-merging dir.c
Auto-merging midx.c
CONFLICT (content): Merge conflict in midx.c
Auto-merging diff.c
Auto-merging dir.c
CONFLICT (content): Merge conflict in dir.c
merge-ort would instead report:
Auto-merging diff.c
Auto-merging dir.c
Auto-merging dir.c
CONFLICT (content): Merge conflict in dir.c
Auto-merging midx.c
CONFLICT (content): Merge conflict in midx.c
The fact that messages for the same file are together is probably
helpful in general, but with the indentation missing for the inner
merge it unfortunately serves to confuse. This probably would lead
users to wonder:
* Why is Git reporting that "dir.c" is being merged twice?
* If midx.c has conflicts, why do I not see any when I open up the
file and why are no conflicts shown in the index?
Fix this output confusion by changing the output to clearly
differentiate the messages for outer merges from the ones for inner
merges, changing the above output from merge-ort to:
Auto-merging diff.c
From inner merge: Auto-merging dir.c
Auto-merging dir.c
CONFLICT (content): Merge conflict in dir.c
From inner merge: Auto-merging midx.c
From inner merge: CONFLICT (content): Merge conflict in midx.c
(Note: the number of spaces after the 'From inner merge:' is
2*call_depth).
One other thing to note here, that I didn't notice until typing up this
commit message, is that merge-recursive does not print any messages from
the inner merges by default; the extra verbosity has to be requested.
merge-ort currently has no verbosity controls and always prints these.
We may also want to change that, but for now, just make the output
clearer with these extra markings and indentation.
[1] https://lore.kernel.org/git/CAGyf7-He4in8JWUh9dpAwvoPkQz9hr8nCBpxOxhZEd8+jtqTpg@mail.gmail.com/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
PCRE2 bug 2642 was fixed in version 10.36. Our 95ca1f987e (grep/pcre2:
better support invalid UTF-8 haystacks, 2021-01-24) worked around it on
older versions by setting the flag PCRE2_NO_START_OPTIMIZE. 797c359978
(grep/pcre2: use compile-time PCREv2 version test, 2021-02-18) switched
it around to set the flag on 10.36 and higher instead, while it claimed
to use "the same test done at compile-time".
Switch the condition back to apply the workaround on PCRE2 versions
_before_ 10.36.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_FORCE_UNTRACKED_CACHE environment variable writes the untracked
cache more frequently than the core.untrackedCache config variable. This
is due to how read_directory() handles the creation of an untracked
cache.
Before this change, Git would not create the untracked cache extension
for an index that did not already have one. Users would need to run a
command such as 'git update-index --untracked-cache' before the index
would actually contain an untracked cache.
In particular, users noticed that the untracked cache would not appear
even with core.untrackedCache=true. Some users reported setting
GIT_FORCE_UNTRACKED_CACHE=1 in their engineering system environment to
ensure the untracked cache would be created.
The decision to not write the untracked cache without an environment
variable tracks back to fc9ecbeb9 (dir.c: don't flag the index as dirty
for changes to the untracked cache, 2018-02-05). The motivation of that
change is that writing the index is expensive, and if the untracked
cache is the only thing that needs to be written, then it is more
expensive than the benefit of the cache. However, this also means that
the untracked cache never gets populated, so the user who enabled it via
config does not actually get the extension until running 'git
update-index --untracked-cache' manually or using the environment
variable.
We have had a version of this change in the microsoft/git fork for a few
major releases now. It has been working well to get users into a good
state. Yes, that first index write is slow, but the remaining index
writes are much faster than they would be without this change.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching with the `--prune` flag we will delete any local
references matching the fetch refspec which have disappeared on the
remote. This step is not currently covered by the `--atomic` flag: we
delete branches even though updating of local references has failed,
which means that the fetch is not an all-or-nothing operation.
Fix this bug by passing in the global transaction into `prune_refs()`:
if one is given, then we'll only queue up deletions and not commit them
right away.
This change also improves performance when pruning many branches in a
repository with a big packed-refs file: every references is pruned in
its own transaction, which means that we potentially have to rewrite
the packed-refs files for every single reference we're about to prune.
The following benchmark demonstrates this: it performs a pruning fetch
from a repository with a single reference into a repository with 100k
references, which causes us to prune all but one reference. This is of
course a very artificial setup, but serves to demonstrate the impact of
only having to write the packed-refs file once:
Benchmark 1: git fetch --prune --atomic +refs/*:refs/* (HEAD~)
Time (mean ± σ): 2.366 s ± 0.021 s [User: 0.858 s, System: 1.508 s]
Range (min … max): 2.328 s … 2.407 s 10 runs
Benchmark 2: git fetch --prune --atomic +refs/*:refs/* (HEAD)
Time (mean ± σ): 1.369 s ± 0.017 s [User: 0.715 s, System: 0.641 s]
Range (min … max): 1.346 s … 1.400 s 10 runs
Summary
'git fetch --prune --atomic +refs/*:refs/* (HEAD)' ran
1.73 ± 0.03 times faster than 'git fetch --prune --atomic +refs/*:refs/* (HEAD~)'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching references from a remote we by default also fetch all tags
which point into the history we have fetched. This is a separate step
performed after updating local references because it requires us to walk
over the history on the client-side to determine whether the remote has
announced any tags which point to one of the fetched commits.
This backfilling of tags isn't covered by the `--atomic` flag: right
now, it only applies to the step where we update our local references.
This is an oversight at the time the flag was introduced: its purpose is
to either update all references or none, but right now we happily update
local references even in the case where backfilling failed.
Fix this by pulling up creation of the reference transaction such that
we can pass the same transaction to both the code which updates local
references and to the code which backfills tags. This allows us to only
commit the transaction in case both actions succeed.
Note that we also have to start passing the transaction into
`find_non_local_tags()`: this function is responsible for finding all
tags which we need to backfill. Right now, it will happily return tags
which have already been updated with our local references. But when we
use a single transaction for both local references and backfilling then
it may happen that we try to queue the same reference update twice to
the transaction, which consequently triggers a bug. We thus have to skip
over any tags which have already been queued.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no way for a caller to see whether a reference update has
already been queued up for a given reference transaction. There are
multiple alternatives to provide this functionality:
- We may add a function that simply tells us whether a specific
reference has already been queued. If implemented naively then
this would potentially be quadratic in runtime behaviour if this
question is asked repeatedly because we have to iterate over all
references every time. The alternative would be to add a hashmap
of all queued reference updates to speed up the lookup, but this
adds overhead to all callers.
- We may add a flag to `ref_transaction_add_update()` that causes it
to skip duplicates, but this has the same runtime concerns as the
first alternative.
- We may add an interface which lets callers collect all updates
which have already been queued such that he can avoid re-adding
them. This is the most flexible approach and puts the burden on
the caller, but also allows us to not impact any of the existing
callsites which don't need this information.
This commit implements the last approach: it allows us to compute the
map of already-queued updates once up front such that we can then skip
all subsequent references which are already part of this map.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the backfilling of tags fails we do not report this error to the
caller, but only report it implicitly at a later point when reporting
updated references. This leaves callers unable to act upon the
information of whether the backfilling succeeded or not.
Refactor the function to return an error code and pass it up the
callstack. This causes us to correctly propagate the error back to the
user of git-fetch(1).
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two different locations where we're appending to FETCH_HEAD:
first when storing updated references, and second when backfilling tags.
Both times we open the file, append to it and then commit it into place,
which is essentially duplicate work.
Improve the lifecycle of updating FETCH_HEAD by opening and committing
it once in `do_fetch()`, where we pass the structure down to the code
which wants to append to it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fetch code flow is a bit hard to understand right now:
1. We optionally prune all references which have vanished on the
remote side.
2. We fetch and update all other references locally.
3. We update the upstream branch in the gitconfig.
4. We backfill tags pointing into the history we have just fetched.
It is quite confusing that we fetch objects and update references in
both (2) and (4), which is further stressed by the point that we use a
`skip` goto label to jump from (3) to (4) in case we fail to update the
gitconfig as expected.
Reorder the code to first update all local references, and only after we
have done so update the upstream branch information. This improves the
code flow and furthermore makes it easier to refactor the way we update
references together.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git-fetch(1) with the `--atomic` flag the expectation is that
either all of the references are updated, or alternatively none are in
case the fetch fails. While we already have tests for this, we do not
have any tests which exercise atomicity either when pruning deleted refs
or when backfilling tags. This gap in test coverage hides that we indeed
don't handle atomicity correctly for both of these cases.
Add test cases which cover these testing gaps to demonstrate the broken
behaviour. Note that tests are not marked as `test_expect_failure`: this
is done to explicitly demonstrate the current known-wrong behaviour, and
they will be fixed up as soon as we fix the underlying bugs.
While at it this commit also adds another test case which demonstrates
that backfilling of tags does not return an error code in case the
backfill fails. This bug will also be fixed by a subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Removal of unused code and doc.
* js/no-more-legacy-stash:
stash: stop warning about the obsolete `stash.useBuiltin` config setting
stash: remove documentation for `stash.useBuiltin`
add: remove support for `git-legacy-stash`
git-sh-setup: remove remnant bits referring to `git-legacy-stash`
"git diff --diff-filter=aR" is now parsed correctly.
* js/diff-filter-negation-fix:
diff-filter: be more careful when looking for negative bits
diff.c: move the diff filter bits definitions up a bit
docs(diff): lose incorrect claim about `diff-files --diff-filter=A`
Interaction between fetch.negotiationAlgorithm and
feature.experimental configuration variables has been corrected.
* en/fetch-negotiation-default-fix:
repo-settings: rename the traditional default fetch.negotiationAlgorithm
repo-settings: fix error handling for unknown values
repo-settings: fix checking for fetch.negotiationAlgorithm=default
The build procedure has been taught to notice older version of zlib
and enable our replacement uncompress2() automatically.
* ab/auto-detect-zlib-compress2:
compat: auto-detect if zlib has uncompress2()
A bug that made multi-pack bitmap and the object order out-of-sync,
making the .midx data corrupt, has been fixed.
* tb/midx-bitmap-corruption-fix:
pack-bitmap.c: gracefully fallback after opening pack/MIDX
midx: read `RIDX` chunk when present
t/lib-bitmap.sh: parameterize tests over reverse index source
t5326: move tests to t/lib-bitmap.sh
t5326: extract `test_rev_exists`
t5326: drop unnecessary setup
pack-revindex.c: instrument loading on-disk reverse index
midx.c: make changing the preferred pack safe
t5326: demonstrate bitmap corruption after permutation
"git log --remerge-diff" shows the difference from mechanical merge
result and the result that is actually recorded in a merge commit.
* en/remerge-diff:
diff-merges: avoid history simplifications when diffing merges
merge-ort: mark conflict/warning messages from inner merges as omittable
show, log: include conflict/warning messages in --remerge-diff headers
diff: add ability to insert additional headers for paths
merge-ort: format messages slightly different for use in headers
merge-ort: mark a few more conflict messages as omittable
merge-ort: capture and print ll-merge warnings in our preferred fashion
ll-merge: make callers responsible for showing warnings
log: clean unneeded objects during `log --remerge-diff`
show, log: provide a --remerge-diff capability
Problems identified by Coverity in the reftable code have been
corrected.
* hn/reftable-coverity-fixes:
reftable: add print functions to the record types
reftable: make reftable_record a tagged union
reftable: remove outdated file reftable.c
reftable: implement record equality generically
reftable: make reftable-record.h function signatures const correct
reftable: handle null refnames in reftable_ref_record_equal
reftable: drop stray printf in readwrite_test
reftable: order unittests by complexity
reftable: all xxx_free() functions accept NULL arguments
reftable: fix resource warning
reftable: ignore remove() return value in stack_test.c
reftable: check reftable_stack_auto_compact() return value
reftable: fix resource leak blocksource.c
reftable: fix resource leak in block.c error path
reftable: fix OOB stack write in print functions
The command line completion (in contrib/) learns to complete
arguments to give to "git sparse-checkout" command.
* ld/sparse-index-bash-completion:
completion: handle unusual characters for sparse-checkout
completion: improve sparse-checkout cone mode directory completion
completion: address sparse-checkout issues
The "struct option" added in 4a28847839 (diff.c: prepare to use
parse_options() for parsing, 2019-01-27) would be free'd in the case
of diff_setup_done() being called.
But not all codepaths that allocate it reach that,
e.g. "t6427-diff3-conflict-markers.sh" will now free memory that it
didn't free before. By using FREE_AND_NULL() here (which
diff_setup_done() also does) we ensure that we free the memory, and
that we won't have double-free's.
Before this running:
./t6427-diff3-conflict-markers.sh -vixd --run=7
Would report:
SUMMARY: LeakSanitizer: 7823 byte(s) leaked in 6 allocation(s).
But now we'll report:
SUMMARY: LeakSanitizer: 703 byte(s) leaked in 5 allocation(s).
I.e. the largest leak in that particular test has now been addressed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Have the diff_free() function call clear_pathspec(). Since the
diff_flush() function calls this all its callers can be simplified to
rely on it instead.
When I added the diff_free() function in e900d494dc (diff: add an API
for deferred freeing, 2021-02-11) I simply missed this, or wasn't
interested in it. Let's consolidate this now. This means that any
future callers (and I've got revision.c in mind) that embed a "struct
diff_options" can simply call diff_free() instead of needing know that
it has an embedded pathspec.
This does fix a bunch of leaks, but I can't mark any test here as
passing under the SANITIZE=leak testing mode because in
886e1084d7 (builtin/: add UNLEAKs, 2017-10-01) an UNLEAK(rev) was
added, which plasters over the memory
leak. E.g. "t4011-diff-symlink.sh" would report fewer leaks with this
fix, but because of the UNLEAK() reports none.
I'll eventually loop around to removing that UNLEAK(rev) annotation as
I'll fix deeper issues with the revisions API leaking. This is one
small step on the way there, a new freeing function in revisions.c
will want to call this diff_free().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other users of xdiff such as libgit2 need to be able to handle
allocation failures. These allocation failures were previously
ignored.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the standard "goto out" pattern rather than repeating very similar
code after checking for each error. This will simplify the next commit
that starts handling allocation failures that are currently ignored.
On error xdl_do_diff() frees the environment so we need to take care
to avoid a double free in that case. xdl_build_script() does not
assign a result unless it is successful so there is no possibility of
a double free if it fails.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other users of libxdiff such as libgit2 need to be able to handle
allocation failures. As NULL is a valid return value the function
signature is changed to be able report allocation failures.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although the patience and histogram algorithms initialize the
environment they do not free it if there is an error. In contrast for
the Myers algorithm the environment is initalized in xdl_do_diff() and
it is freed if there is an error. Fix this by always initializing the
environment in xdl_do_diff() and freeing it there if there is an
error. Remove the comment in do_patience_diff() about the environment
being freed by xdl_diff() as it is not accurate because (a) xdl_diff()
does not do that if there is an error and (b) xdl_diff() is not the
only caller.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in the parse_date_format() function by providing a
new date_mode_release() companion function.
By using this in "t/helper/test-date.c" we can mark the
"t0006-date.sh" test as passing when git is compiled with
SANITIZE=leak, and whitelist it to run under
"GIT_TEST_PASSING_SANITIZE_LEAK=true" by adding
"TEST_PASSES_SANITIZE_LEAK=true" to the test itself.
The other tests that expose this memory leak (i.e. take the
"mode->type == DATE_STRFTIME" branch in parse_date_format()) are
"t6300-for-each-ref.sh" and "t7004-tag.sh". The former is due to an
easily fixed leak in "ref-filter.c", and brings the failures in
"t6300-for-each-ref.sh" down from 51 to 48.
Fixing the remaining leaks will have to wait until there's a
release_revisions() in "revision.c", as they have to do with leaks via
"struct rev_info".
There is also a leak in "builtin/blame.c" due to its call to
parse_date_format() to parse the "blame.date" configuration. However
as it declares a file-level "static struct date_mode blame_date_mode"
to track the data, LSAN will not report it as a leak. It's possible to
get valgrind(1) to complain about it with e.g.:
valgrind --leak-check=full --show-leak-kinds=all ./git -P -c blame.date=format:%Y blame README.md
But let's focus on things LSAN complains about, and are thus
observable with "TEST_PASSES_SANITIZE_LEAK=true". We should get to
fixing memory leaks in "builtin/blame.c", but as doing so would
require some re-arrangement of cmd_blame() let's leave it for some
other time.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add basic API doc comments to date.h, and while doing so move the the
parse_date_format() function adjacent to show_date(). This way all the
"struct date_mode" functions are grouped together. Documenting the
rest is one of our #leftoverbits.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide and use a DATE_MODE_INIT macro. Most of the users of struct
date_mode" use it via pretty.h's "struct pretty_print_context" which
doesn't have an initialization macro, so we're still bound to being
initialized to "{ 0 }" by default.
But we can change the couple of callers that directly declared a
variable on the stack to instead use the initializer, and thus do away
with the "mode.local = 0" added in add00ba2de (date: make "local"
orthogonal to date format, 2015-09-03).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the declaration of the date.c functions from cache.h, and adjust
the relevant users to include the new date.h header.
The show_ident_date() function belonged in pretty.h (it's defined in
pretty.c), its two users outside of pretty.c didn't strictly need to
include pretty.h, as they get it indirectly, but let's add it to them
anyway.
Similarly, the change to "builtin/{fast-import,show-branch,tag}.c"
isn't needed as far as the compiler is concerned, but since they all
use the "DATE_MODE()" macro we now define in date.h, let's have them
include it.
We could simply include this new header in "cache.h", but as this
change shows these functions weren't common enough to warrant
including in it in the first place. By moving them out of cache.h
changes to this API will no longer cause a (mostly) full re-build of
the project when "make" is run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There has never been a show_date_human() function on the "master"
branch in git.git. This declaration was added in b841d4ff43 (Add
`human` format to test-tool, 2019-01-28).
A look at the ML history reveals that it was leftover cruft from an
earlier version of that commit[1].
1. https://lore.kernel.org/git/20190118061805.19086-5-ischis2@cox.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the parsing of "grep.patternType" and
"grep.extendedRegexp". This changes no behavior, but gets rid of
complex parsing logic that isn't needed anymore.
When "grep.patternType" was introduced in 84befcd0a4 (grep: add a
grep.patternType configuration setting, 2012-08-03) we promised that:
1. You can set "grep.patternType", and "[setting it to] 'default'
will return to the default matching behavior".
In that context "the default" meant whatever the configuration
system specified before that change, i.e. via grep.extendedRegexp.
2. We'd support the existing "grep.extendedRegexp" option, but ignore
it when the new "grep.patternType" option is set. We said we'd
only ignore the older "grep.extendedRegexp" option "when the
`grep.patternType` option is set to a value other than
'default'".
In a preceding commit we changed grep_config() to be called after
grep_init(), which means that much of the complexity here can go
away.
As before both "grep.patternType" and "grep.extendedRegexp" are
last-one-wins variable, with "grep.extendedRegexp" yielding to
"grep.patternType", except when "grep.patternType=default".
Note that as the previously added tests indicate this cannot be done
on-the-fly as we see the config variables, without introducing more
state keeping. I.e. if we see:
-c grep.extendedRegexp=false
-c grep.patternType=default
-c extendedRegexp=true
We need to select ERE, since grep.patternType=default unselects that
variable, which normally has higher precedence, but we also need to
select BRE in cases of:
-c grep.extendedRegexp=true \
-c grep.extendedRegexp=false
Which would not be the case for this, which select ERE:
-c grep.patternType=extended \
-c grep.extendedRegexp=false
Therefore we cannot do this on-the-fly in grep_config without also
introducing tracking variables for not only the pattern type, but what
the source of that pattern type was.
So we need to decide on the pattern after our config was fully
parsed. Let's do that by deferring the decision on the pattern type
until it's time to compile it in compile_regexp().
By that time we've not only parsed the config, but also handled the
command-line options. Those will set "opt.pattern_type_option" (*not*
"opt.extended_regexp_option"!).
At that point all we need to do is see if "grep.patternType" was
UNSPECIFIED in the end (including an explicit "=default"), if so we'll
use the "grep.extendedRegexp" configuration, if any.
See my 07a3d41173 (grep: remove regflags from the public grep_opt
API, 2017-06-29) for addition of the two comments being removed here,
i.e. the complexity noted in that commit is now going away.
1. https://lore.kernel.org/git/patch-v8-09.10-c211bb0c69d-20220118T155211Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code in compile_regexp() to check the cheaper boolean
"!opt->pcre2" condition before the "memchr()" search.
This doesn't noticeably optimize anything, but makes the code more
obvious and conventional. The line wrapping being added here also
makes a subsequent commit smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "pattern_type_option" member of "struct grep_opt" to use
the enum type we use for it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The grep_init() function used the odd pattern of initializing the
passed-in "struct grep_opt" with a statically defined "grep_defaults"
struct, which would be modified in-place when we invoked
grep_config().
So we effectively (b) initialized config, (a) then defaults, (c)
followed by user options. Usually those are ordered as "a", "b" and
"c" instead.
As the comments being removed here show the previous behavior needed
to be carefully explained as we'd potentially share the populated
configuration among different instances of grep_init(). In practice we
didn't do that, but now that it can't be a concern anymore let's
remove those comments.
This does not change the behavior of any of the configuration
variables or options. That would have been the case if we didn't move
around the grep_config() call in "builtin/log.c". But now that we call
"grep_config" after "git_log_config" and "git_format_config" we'll
need to pass in the already initialized "struct grep_opt *".
See 6ba9bb76e0 (grep: copy struct in one fell swoop, 2020-11-29) and
7687a0541e (grep: move the configuration parsing logic to grep.[ch],
2012-10-09) for the commits that added the comments.
The memcpy() pattern here will be optimized away and follows the
convention of other *_init() functions. See 5726a6b401 (*.c *_init():
define in terms of corresponding *_INIT macro, 2021-07-01).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change grep_cmd_config() to stop passing around the always-NULL "cb"
value. When this code was added in 7e8f59d577 (grep: color patterns
in output, 2009-03-07) it was non-NULL, but when that changed in
15fabd1bbd (builtin/grep.c: make configuration callback more
reusable, 2012-10-09) this code was left behind.
In a subsequent change I'll start using the "cb" value, this will make
it clear which functions we call need it, and which don't.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code in "builtin/grep.c" and "builtin/ls-tree.c" to trust the
"prefix" passed from "run_builtin()". The "prefix" we get from setup.c
is either going to be NULL or a string of length >0, never "".
So we can drop the "prefix && *prefix" checks added for
"builtin/grep.c" in 0d042fecf2 (git-grep: show pathnames relative to
the current directory, 2006-08-11), and for "builtin/ls-tree.c" in
a69dd585fc (ls-tree: chomp leading directories when run from a
subdirectory, 2005-12-23).
As seen in code in revision.c that was added in cd676a5136 (diff
--relative: output paths as relative to the current subdirectory,
2008-02-12) we already have existing code that does away with this
assertion.
This makes it easier to reason about a subsequent change to the
"prefix_length" code in grep.c in a subsequent commit, and since we're
going to the trouble of doing that let's leave behind an assert() to
promise this to any future callers.
For "builtin/grep.c" it would be painful to pass the "prefix" down the
callchain of:
cmd_grep -> grep_tree -> grep_submodule -> grep_cache -> grep_oid ->
grep_source_name
So for the code that needs it in grep_source_name() let's add a
"grep_prefix" variable similar to the existing "ls_tree_prefix".
While at it let's move the code in cmd_ls_tree() around so that we
assign to the "ls_tree_prefix" right after declaring the variables,
and stop assigning to "prefix". We only subsequently used that
variable later in the function after clobbering it. Let's just use our
own "grep_prefix" instead.
Let's also add an assert() in git.c, so that we'll make this promise
about the "prefix" to any current and future callers, as well as to
any readers of the code.
Code history:
* The strlen() in "grep.c" hasn't been used since 493b7a08d8 (grep:
accept relative paths outside current working directory, 2009-09-05).
When that code was added in 0d042fecf2 (git-grep: show pathnames
relative to the current directory, 2006-08-11) we used the length.
But since 493b7a08d8 we haven't used it for anything except a
boolean check that we could have done on the "prefix" member
itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the grep tests to assert that setting
"grep.patternType=extended" followed by "grep.patternType=default"
will behave as if "--basic-regexp" was provided, and not as
"--extended-regexp". In a subsequent commit we'll need to treat
"grep.patternType=default" as a special-case, but let's make sure we
ignore it if it's being set to "default" following an earlier
non-"default" "grep.patternType" setting.
Let's also test what happens when we have a sequence of "extended"
followed by "default" and "fixed". In that case the "fixed" should
prevail, as well as tests to check that a "grep.extendedRegexp=true"
followed by a "grep.extendedRegexp=false" behaves as though
"grep.extendedRegexp" wasn't provided.
See [1] for the source of some of these tests, and their
initial (pseudocode) implementation, and [2] for a later discussion
about a breakage due to missing testing (which had been noted in [1]
all along).
1. https://lore.kernel.org/git/xmqqv8zf6j86.fsf@gitster.g/
2. https://lore.kernel.org/git/xmqqpmoczwtu.fsf@gitster.g/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the repeated test code for finding out whether a given set of
configuration will pick basic, extended or fixed into a new
"test_pattern_type" helper function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the tests added in my 9df46763ef (log: add exhaustive tests
for pattern style options & config, 2017-05-20) to check not only
whether "git log" handles "grep.patternType", but also "git show"
etc.
It's sufficient to check whether we match a "fixed" or a "basic" regex
here to see if these codepaths correctly invoked grep_config(). We
don't need to check the details of their regular expression matching
as the "log" test does.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This "regex_t" in grep_opt has not been used since
f9b9faf6f8 (builtin-grep: allow more than one patterns., 2006-05-02),
we still use a "regex_t" for compiling regexes, but that's in the
"grep_pat" struct".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
34ae3b70 (name-rev: deprecate --stdin in favor of --annotate-stdin,
2022-01-05) added --annotate-stdin to replace --stdin as a clearer
flag name. Since --stdin is to be deprecated, we should replace
--stdin in the output from "git name-rev -h".
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stolee transitioned from Microsoft to GitHub in July 2020, but continued
to use <dstolee@microsoft.com> because it was a valid address. He also
used <stolee@gmail.com> to communicate with the mailing list since
writing plaintext emails is difficult in Outlook. However, recent issues
with GMail delaying mailing list messages created a need to change his
primary email address.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `eol` takes effect on text files only when the index has the
contents in LF line endings. Paths with contents in CRLF line
endings in the index may become dirty unless text=auto.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git fetch --prune" failed to prune the refs it wanted to
prune, the command issued error messages but exited with exit
status 0, which has been corrected.
* tg/fetch-prune-exit-code-fix:
fetch --prune: exit with error if pruning fails
Update the contributor-facing documents on proposed log messages.
* jc/doc-log-messages:
SubmittingPatches: explain why we care about log messages
CodingGuidelines: hint why we value clearly written log messages
SubmittingPatches: write problem statement in the log in the present tense
Pick a better random number generator and use it when we prepare
temporary filenames.
* bc/csprng-mktemps:
wrapper: use a CSPRNG to generate random file names
wrapper: add a helper to generate numbers from a CSPRNG
Doc and test update around the eol attribute.
* bc/clarify-eol-attr:
docs: correct documentation about eol attribute
t0027: add tests for eol without text in .gitattributes
The protocol keyword 'ready' isn't meant for translation. Pass it as
parameter instead of spell it in die() message (and potentially confuse
translators).
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's useful to be able to countermand a previous --graph option, for
example if `git log --graph` is run via an alias.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When updating references via git-fetch(1), then by default we report to
the user which references have been changed. This output is formatted in
a nice table such that the different columns are aligned. Because the
first column contains abbreviated object IDs we thus need to iterate
over all refs which have changed and compute the minimum length for
their respective abbreviated hashes. While this effort makes sense in
most cases, it is wasteful when the user passes the `--quiet` flag: we
don't print the summary, but still compute the length.
Skip computing the summary width when the user asked for us to be quiet.
This gives us a speedup of nearly 10% when doing a mirror-fetch in a
repository with thousands of references being updated:
Benchmark 1: git fetch --quiet +refs/*:refs/* (HEAD~)
Time (mean ± σ): 96.078 s ± 0.508 s [User: 91.378 s, System: 10.870 s]
Range (min … max): 95.449 s … 96.760 s 5 runs
Benchmark 2: git fetch --quiet +refs/*:refs/* (HEAD)
Time (mean ± σ): 88.214 s ± 0.192 s [User: 83.274 s, System: 10.978 s]
Range (min … max): 87.998 s … 88.446 s 5 runs
Summary
'git fetch --quiet +refs/*:refs/* (HEAD)' ran
1.09 ± 0.01 times faster than 'git fetch --quiet +refs/*:refs/* (HEAD~)'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During packfile negotiation we iterate over all refs announced by the
remote side to check whether their IDs refer to commits already known to
us. If a commit is known to us already, then its date is a potential
cutoff point for commits we have in common with the remote side.
There is potentially a lot of commits announced by the remote depending
on how many refs there are in the remote repository, and for every one
of them we need to search for it in our object database and, if found,
parse the corresponding object to find out whether it is a candidate for
the cutoff date. This can be sped up by trying to look up commits via
the commit-graph first, which is a lot more efficient.
Benchmarks in a repository with about 2,1 million refs and an up-to-date
commit-graph show an almost 20% speedup when mirror-fetching:
Benchmark 1: git fetch +refs/*:refs/* (v2.35.0)
Time (mean ± σ): 115.587 s ± 2.009 s [User: 109.874 s, System: 11.305 s]
Range (min … max): 113.584 s … 118.820 s 5 runs
Benchmark 2: git fetch +refs/*:refs/* (HEAD)
Time (mean ± σ): 96.859 s ± 0.624 s [User: 91.948 s, System: 10.980 s]
Range (min … max): 96.180 s … 97.875 s 5 runs
Summary
'git fetch +refs/*:refs/* (HEAD)' ran
1.19 ± 0.02 times faster than 'git fetch +refs/*:refs/* (v2.35.0)'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test fiddles with files under .git/logs to recreate a condition
that is unlikely to warrant special attention under reftable, as
reflog blocks are zlib compressed.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the test compatible with reftable (it doesn't pass yet for
other reasons, unfortunately)
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have description on "per worktree ref", but "worktree" is not
described in the glossary. We do have "working tree", though.
Casually put, a "working tree" is what your editor and compiler
interacts with. "worktree" is a mechanism to allow one or more
"working tree"s to be attached to a repository and used to check out
different commits and branches independently, which includes not
just a "working tree" but also repository metadata like HEAD, the
index to support simultaneous use of them. Historically, we used
these terms interchangeably but we have been trying to use "working
tree" when we mean it, instead of "worktree".
Most of the existing references to "working tree" in the glossary do
refer primarily to the working tree portion, except for one that
said refs like HEAD and refs/bisect/* are per "working tree", but it
is more precise to say they are per "worktree".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `|` at line end already imples that the statement is not over.
So a `\` after that is redundant.
Signed-off-by: Jaydeep P Das <jaydeepjd.8914@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning a repo with a --filter and with --recurse-submodules
enabled, the partial clone filter only applies to the top-level repo.
This can lead to unexpected bandwidth and disk usage for projects which
include large submodules. For example, a user might wish to make a
partial clone of Gerrit and would run:
`git clone --recurse-submodules --filter=blob:5k https://gerrit.googlesource.com/gerrit`.
However, only the superproject would be a partial clone; all the
submodules would have all blobs downloaded regardless of their size.
With this change, the same filter can also be applied to submodules,
meaning the expected bandwidth and disk savings apply consistently.
To avoid changing default behavior, add a new clone flag,
`--also-filter-submodules`. When this is set along with `--filter` and
`--recurse-submodules`, the filter spec is passed along to git-submodule
and git-submodule--helper, such that submodule clones also have the
filter applied.
This applies the same filter to the superproject and all submodules.
Users who need to customize the filter per-submodule would need to clone
with `--no-recurse-submodules` and then manually initialize each
submodule with the proper filter.
Applying filters to submodules should be safe thanks to Jonathan Tan's
recent work [1, 2, 3] eliminating the use of alternates as a method of
accessing submodule objects, so any submodule object access now triggers
a lazy fetch from the submodule's promisor remote if the accessed object
is missing. This patch is a reworked version of [4], which was created
prior to Jonathan Tan's work.
[1]: 8721e2e (Merge branch 'jt/partial-clone-submodule-1', 2021-07-16)
[2]: 11e5d0a (Merge branch 'jt/grep-wo-submodule-odb-as-alternate',
2021-09-20)
[3]: 162a13b (Merge branch 'jt/no-abuse-alternate-odb-for-submodules',
2021-10-25)
[4]: https://lore.kernel.org/git/52bf9d45b8e2b72ff32aa773f2415bf7b2b86da2.1563322192.git.steadmon@google.com/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the logic to compute alignment requirement for our mem-pool.
* jc/mem-pool-alignment:
mem-pool: don't assume uintmax_t is aligned enough for all types
Mark in various places in the code that the sparse index and the
split index features are mutually incompatible.
* js/sparse-vs-split-index:
split-index: it really is incompatible with the sparse index
t1091: disable split index
sparse-index: sparse index is disallowed when split index is active
Cloning from a repository that does not yet have any branches or
tags but has other refs resulted in a "remote transport reported
error", which has been corrected.
* jt/clone-not-quite-empty:
clone: support unusual remote ref configurations
"git sparse-checkout init" failed to write into $GIT_DIR/info
directory when the repository was created without one, which has
been corrected to auto-create it.
* jt/sparse-checkout-leading-dir-fix:
sparse-checkout: create leading directory
More "config-based hooks".
* ab/config-based-hooks-2:
run-command: remove old run_hook_{le,ve}() hook API
receive-pack: convert push-to-checkout hook to hook.h
read-cache: convert post-index-change to use hook.h
commit: convert {pre-commit,prepare-commit-msg} hook to hook.h
git-p4: use 'git hook' to run hooks
send-email: use 'git hook run' for 'sendemail-validate'
git hook run: add an --ignore-missing flag
hooks: convert worktree 'post-checkout' hook to hook library
hooks: convert non-worktree 'post-checkout' hook to hook library
merge: convert post-merge to use hook.h
am: convert applypatch-msg to use hook.h
rebase: convert pre-rebase to use hook.h
hook API: add a run_hooks_l() wrapper
am: convert {pre,post}-applypatch to use hook.h
gc: use hook library for pre-auto-gc hook
hook API: add a run_hooks() wrapper
hook: add 'run' subcommand
The code path that verifies signatures made with ssh were made to
work better on a system with CRLF line endings.
* fs/ssh-signing-crlf:
gpg-interface: trim CR from ssh-keygen
"git name-rev --stdin" does not behave like usual "--stdin" at
all. Start the process of renaming it to "--annotate-stdin".
* jc/name-rev-stdin:
name-rev.c: use strbuf_getline instead of limited size buffer
name-rev: deprecate --stdin in favor of --annotate-stdin
"git fetch --negotiate-only" is an internal command used by "git
push" to figure out which part of our history is missing from the
other side. It should never recurse into submodules even when
fetch.recursesubmodules configuration variable is set, nor it
should trigger "gc". The code has been tightened up to ensure it
only does common ancestry discovery and nothing else.
* gc/fetch-negotiate-only-early-return:
fetch: help translators by reusing the same message template
fetch --negotiate-only: do not update submodules
fetch: skip tasks related to fetching objects
fetch: use goto cleanup in cmd_fetch()
"git add -p" rewritten in C regressed hunk splitting in some cases,
which has been corrected.
* pw/add-p-hunk-split-fix:
builtin add -p: fix hunk splitting
t3701: clean up hunk splitting tests
We explain that revs come first before the pathspec among command
line arguments, but did not spell out that dashed options come
before other args, which has been corrected.
* tl/doc-cli-options-first:
git-cli.txt: clarify "options first and then args"
The conditional inclusion mechanism of configuration files using
"[includeIf <condition>]" learns to base its decision on the
URL of the remote repository the repository interacts with.
* jt/conditional-config-on-remote-url:
config: include file if remote URL matches a glob
config: make git_config_include() static
The merge-ort misbehaved when merge.renameLimit configuration is
set too low and failed to find all renames.
* en/merge-ort-restart-optim-fix:
merge-ort: avoid assuming all renames detected
When trying to write a MIDX, we already prevent the case where there
weren't any packs present, and thus we would have written an empty MIDX.
But there is another "empty" case, which is more interesting, and we
don't yet handle. If we try to write a MIDX which has at least one pack,
but those packs together don't contain any objects, we will encounter a
BUG() when trying to use the bitmap corresponding to that MIDX, like so:
$ git rev-parse HEAD | git pack-objects --revs --use-bitmap-index --stdout >/dev/null
BUG: pack-revindex.c:394: pack_pos_to_midx: out-of-bounds object at 0
(note that in the above reproduction, both `--use-bitmap-index` and
`--stdout` are important, since without the former we won't even both to
load the .bitmap, and without the latter we wont attempt pack reuse).
The problem occurs when we try to discover the identity of the
preferred pack to determine which range if any of existing packs we can
reuse verbatim. This path is: `reuse_packfile_objects()` ->
`reuse_partial_packfile_from_bitmap()` -> `midx_preferred_pack()`.
#4 0x000055555575401f in pack_pos_to_midx (m=0x555555997160, pos=0) at pack-revindex.c:394
#5 0x00005555557502c8 in midx_preferred_pack (bitmap_git=0x55555599c280) at pack-bitmap.c:1431
#6 0x000055555575036c in reuse_partial_packfile_from_bitmap (bitmap_git=0x55555599c280, packfile_out=0x5555559666b0 <reuse_packfile>,
entries=0x5555559666b8 <reuse_packfile_objects>, reuse_out=0x5555559666c0 <reuse_packfile_bitmap>) at pack-bitmap.c:1452
#7 0x00005555556041f6 in get_object_list_from_bitmap (revs=0x7fffffffcbf0) at builtin/pack-objects.c:3658
#8 0x000055555560465c in get_object_list (ac=2, av=0x555555997050) at builtin/pack-objects.c:3765
#9 0x0000555555605e4e in cmd_pack_objects (argc=0, argv=0x7fffffffe920, prefix=0x0) at builtin/pack-objects.c:4154
Since neither the .bitmap or MIDX stores the identity of the
preferred pack, we infer it by trying to load the first object in
pseudo-pack order, and then asking the MIDX which pack was chosen to
represent that object.
But this fails our bounds check, since there are zero objects in the
MIDX to begin with, which results in the BUG().
We could catch this more carefully in `midx_preferred_pack()`, but
signaling the absence of a preferred pack out to all of its callers is
somewhat awkward.
Instead, let's avoid writing a MIDX .bitmap without any objects
altogether. We catch this case in `write_midx_internal()`, and emit a
warning if the caller indicated they wanted to write a bitmap before
clearing out the relevant flags. If we somehow got to
write_midx_bitmap(), then we will call BUG(), but this should now be an
unreachable path.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the __gitcomp_directories method to de-quote and handle unusual
characters in directory names. Although this initially involved an attempt
to re-use the logic in __git_index_files, this method removed
subdirectories (e.g. folder1/0/ became folder1/), so instead new custom
logic was placed directly in the __gitcomp_directories method.
Note there are two tests for this new functionality - one for spaces and
accents and one for backslashes and tabs. The backslashes and tabs test
uses FUNNYNAMES to avoid running on Windows. This is because:
1. Backslashes are explicitly not allowed in Windows file paths.
2. Although tabs appear to be allowed when creating a file in a Windows
bash shell, they actually are not renderable (and appear as empty boxes
in the shell).
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Co-authored-by: Lessley Dennington <lessleydennington@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use new __gitcomp_directories method to complete directory names in cone
mode sparse-checkouts. This method addresses the caveat of poor
performance in monorepos from the previous commit (by completing only one
level of directories).
The unusual character caveat from the previous commit will be fixed by the
final commit in this series.
Co-authored-by: Elijah Newren <newren@gmail.com>
Co-authored-by: Lessley Dennington <lessleydennington@gmail.com>
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct multiple issues with tab completion of the git sparse-checkout
command. These issues were:
1. git sparse-checkout <TAB> previously resulted in an incomplete list of
subcommands (it was missing reapply and add).
2. Subcommand options were not tab-completable.
3. git sparse-checkout set <TAB> and git sparse-checkout add <TAB> showed
both file names and directory names. While this may be a less surprising
behavior for non-cone mode, cone mode sparse checkouts should complete
only directory names.
Note that while the new strategy of just using git ls-tree to complete on
directory names is simple and a step in the right direction, it does have
some caveats. These are:
1. Likelihood of poor performance in large monorepos (as a result of
recursively completing directory names).
2. Inability to handle paths containing unusual characters.
These caveats will be fixed by subsequent commits in this series.
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We just fixed a class of recently introduced bugs where calling, say,
`git fetch -h` outside a repository would not show the usage but instead
show an ugly `BUG` message.
Let's verify that this does not regress anymore.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we taught these commands about the sparse index, we did not account
for the fact that the `cmd_*()` functions _can_ be called without a
gitdir, namely when `-h` is passed to show the usage.
A plausible approach to address this is to move the
`prepare_repo_settings()` calls right after the `parse_options()` calls:
The latter will never return when it handles `-h`, and therefore it is
safe to assume that we have a `gitdir` at that point, as long as the
built-in is marked with the `RUN_SETUP` flag.
However, it is unfortunately not that simple. In `cmd_pack_objects()`,
for example, the repo settings need to be fully populated so that the
command-line options `--sparse`/`--no-sparse` can override them, not the
other way round.
Therefore, we choose to imitate the strategy taken in `cmd_diff()`,
where we simply do not bother to prepare and initialize the repo
settings unless we have a `gitdir`.
This fixes https://github.com/git-for-windows/git/issues/3688
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This method was created in f1de981e8 (config: fix leaks from
git_config_get_string_const(), 2020-08-14) but its only use was in the
repo_config_get_string_tmp() method, also declared in config.h and
implemented in config.c. Since this is otherwise unused and is a very
similar implementation to git_configset_get_value(), let's remove this
declaration.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When adding a new worktree, it is reasonable to expect that we want to
use the current set of sparse-checkout settings for that new worktree.
This is particularly important for repositories where the worktree would
become too large to be useful. This is even more important when using
partial clone as well, since we want to avoid downloading the missing
blobs for files that should not be written to the new worktree.
The only way to create such a worktree without this intermediate step of
expanding the full worktree is to copy the sparse-checkout patterns and
config settings during 'git worktree add'. Each worktree has its own
sparse-checkout patterns, and the default behavior when the
sparse-checkout file is missing is to include all paths at HEAD. Thus,
we need to have patterns from somewhere, they might as well be the
current worktree's patterns. These are then modified independently in
the future.
In addition to the sparse-checkout file, copy the worktree config file
if worktree config is enabled and the file exists. This will copy over
any important settings to ensure the new worktree behaves the same as
the current one. The only exception we must continue to make is that
core.bare and core.worktree should become unset in the worktree's config
file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git sparse-checkout set/init` enables worktree-specific
configuration[*] by setting extensions.worktreeConfig=true, but neglects
to perform the additional necessary bookkeeping of relocating
`core.bare=true` and `core.worktree` from $GIT_COMMON_DIR/config to
$GIT_COMMON_DIR/config.worktree, as documented in git-worktree.txt. As a
result of this oversight, these settings, which are nonsensical for
secondary worktrees, can cause Git commands to incorrectly consider a
worktree bare (in the case of `core.bare`) or operate on the wrong
worktree (in the case of `core.worktree`). Fix this problem by taking
advantage of the recently-added init_worktree_config() which enables
`extensions.worktreeConfig` and takes care of necessary bookkeeping.
While at it, for backward-compatibility reasons, also stop upgrading the
repository format to "1" since doing so is (unintentionally) not
required to take advantage of `extensions.worktreeConfig`, as explained
by 11664196ac ("Revert "check_repository_format_gently(): refuse
extensions for old repositories"", 2020-07-15).
[*] The main reason to use worktree-specific config for the
sparse-checkout builtin was to avoid enabling sparse-checkout patterns
in one and causing a loss of files in another. If a worktree does not
have a sparse-checkout patterns file, then the sparse-checkout logic
will not kick in on that worktree.
Reported-by: Sean Allred <allred.sean@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some config settings, such as those for sparse-checkout, are likely
intended to only apply to one worktree at a time. To make this write
easier, add a new config API method, repo_config_set_worktree_gently().
This method will attempt to write to the worktree-specific config, but
will instead write to the common config file if worktree config is not
enabled. The next change will introduce a consumer of this method.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Upgrading a repository to use extensions.worktreeConfig is non-trivial.
There are several steps involved, including moving some config settings
from the common config file to the main worktree's config.worktree file.
The previous change updated the documentation with all of these details.
Commands such as 'git sparse-checkout set' upgrade the repository to use
extensions.worktreeConfig without following these steps, causing some
user pain in some special cases.
Create a helper method, init_worktree_config(), that will be used in a
later change to fix this behavior within 'git sparse-checkout set'. The
method is carefully documented in worktree.h.
Note that we do _not_ upgrade the repository format version to 1 during
this process. The worktree config extension must be considered by Git
and third-party tools even if core.repositoryFormatVersion is 0 for
historical reasons documented in 11664196ac ("Revert
"check_repository_format_gently(): refuse extensions for old
repositories"", 2020-07-15). This is a special case for this extension,
and newer extensions (such as extensions.objectFormat) still need to
upgrade the repository format version.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The extensions.worktreeConfig extension was added in 58b284a (worktree:
add per-worktree config files, 2018-10-21) and was somewhat documented
in Documentation/git-config.txt. However, the extensions.worktreeConfig
value was not specified further in the list of possible config keys. The
location of the config.worktree file is not specified, and there are
some precautions that should be mentioned clearly, but are only
mentioned in git-worktree.txt.
Expand the documentation to help users discover the complexities of
extensions.worktreeConfig by adding details and cross links in these
locations (relative to Documentation/):
- config/extensions.txt
- git-config.txt
- git-worktree.txt
The updates focus on items such as
* $GIT_DIR/config.worktree takes precedence over $GIT_COMMON_DIR/config.
* The core.worktree and core.bare=true settings are incorrect to have in
the common config file when extensions.worktreeConfig is enabled.
* The sparse-checkout settings core.sparseCheckout[Cone] are recommended
to be set in the worktree config.
As documented in 11664196ac ("Revert "check_repository_format_gently():
refuse extensions for old repositories"", 2020-07-15), this extension
must be considered regardless of the repository format version for
historical reasons.
A future change will update references to extensions.worktreeConfig
within git-sparse-checkout.txt, but a behavior change is needed before
making those updates.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in codepaths that use the "struct
transport_ls_refs_options" API. Since the introduction of the struct
in 39835409d1 (connect, transport: encapsulate arg in struct,
2021-02-05) the caller has been responsible for freeing it.
That commit in turn migrated code originally added in
402c47d939 (clone: send ref-prefixes when using protocol v2,
2018-07-20) and b4be74105f (ls-remote: pass ref prefixes when
requesting a remote's refs, 2018-03-15). Only some of those codepaths
were releasing the allocated resources of the struct, now all of them
will.
Mark the "t/t5511-refspec.sh" test as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target). Previously 24/47 tests would fail.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak that happened when the --path option was
provided. This leak has been with us ever since the option was added
in 3970243150 (add --path option to git hash-object, 2008-08-03).
We can now mark "t1007-hash-object.sh" as passing when git is compiled
with SANITIZE=leak. It'll now run in the the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git update-index --refresh" has been taught to deal better with
racy timestamps (just like "git status" already does).
* ms/update-index-racy:
update-index: refresh should rewrite index in case of racy timestamps
t7508: add tests capturing racy timestamp handling
t7508: fix bogus mtime verification
test-lib: introduce API for verifying file mtime
Assorted updates to "git cat-file", especially "-h".
* ab/cat-file:
cat-file: s/_/-/ in typo'd usage_msg_optf() message
cat-file: don't whitespace-pad "(...)" in SYNOPSIS and usage output
cat-file: use GET_OID_ONLY_TO_DIE in --(textconv|filters)
object-name.c: don't have GET_OID_ONLY_TO_DIE imply *_QUIETLY
cat-file: correct and improve usage information
cat-file: fix remaining usage bugs
cat-file: make --batch-all-objects a CMDMODE
cat-file: move "usage" variable to cmd_cat_file()
cat-file docs: fix SYNOPSIS and "-h" output
parse-options API: add a usage_msg_optf()
cat-file tests: test messaging on bad objects/paths
cat-file tests: test bad usage
Fix a hand-rolled alloca() imitation that may have violated
alignment requirement of data being sorted in compatibility
implementation of qsort_s() and stable qsort().
* jc/qsort-s-alignment-fix:
stable-qsort: avoid using potentially unaligned access
compat/qsort_s.c: avoid using potentially unaligned access
"git apply" (ab)used the util pointer of the string-list to keep
track of how each symbolic link needs to be handled, which has been
simplified by using strset.
* rs/apply-symlinks-use-strset:
apply: use strsets to track symlinks
Code clean-up.
* rs/grep-expr-cleanup:
grep: use grep_and_expr() in compile_pattern_and()
grep: extract grep_binexp() from grep_or_expr()
grep: use grep_not_expr() in compile_pattern_not()
grep: use grep_or_expr() in compile_pattern_or()
* jh/p4-spawning-external-commands-cleanup:
git-p4: don't print shell commands as python lists
git-p4: pass command arguments as lists instead of using shell
git-p4: don't select shell mode using the type of the command argument
"git pull --rebase" ignored the rebase.autostash configuration
variable when the remote history is a descendant of our history,
which has been corrected.
* pb/pull-rebase-autostash-fix:
pull --rebase: honor rebase.autostash when fast-forwarding
* add '<>' around arguments where missing
* convert plurals into '...' forms
This applies the style guide for documentation.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the same message when an invalid value is passed to a command line
option or a configuration variable.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Find more incompatible options to factorize.
When more than two options are mutually exclusive, print the ones
which are actually on the command line.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Have this file added in 06ba9d03e3 (t0051: test GIT_TRACE to a
windows named pipe, 2018-09-11) use the same "skip_all" pattern as an
existing Windows-only test added in 0e218f91c2 (mingw: unset PERL5LIB
by default, 2018-10-30) uses.
This way TAP consumers like "prove" will show a nice summary when the
test is skipped. Instead of:
$ prove t0051-windows-named-pipe.sh
[...]
t0051-windows-named-pipe.sh .. ok
[...]
We will prominently show a "skipped" notice:
$ prove t0051-windows-named-pipe.sh
[...]
t0051-windows-named-pipe.sh ... skipped: skipping Windows-specific tests
[...]
This is because we are now making use of the right TAP-y way to
communicate this to the consumer. I.e. skipping the whole test file,
v.s. skipping individual tests (in this case there's only one test).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To improve the submodules UX, we would like to teach Git to handle
branches in submodules. Start this process by teaching "git branch" the
--recurse-submodules option so that "git branch --recurse-submodules
topic" will create the `topic` branch in the superproject and its
submodules.
Although this commit does not introduce breaking changes, it does not
work well with existing --recurse-submodules commands because "git
branch --recurse-submodules" writes to the submodule ref store, but most
commands only consider the superproject gitlink and ignore the submodule
ref store. For example, "git checkout --recurse-submodules" will check
out the commits in the superproject gitlinks (and put the submodules in
detached HEAD) instead of checking out the submodule branches.
Because of this, this commit introduces a new configuration value,
`submodule.propagateBranches`. The plan is for Git commands to
prioritize submodule ref store information over superproject gitlinks if
this value is true. Because "git branch --recurse-submodules" writes to
submodule ref stores, for the sake of clarity, it will not function
unless this configuration value is set.
This commit also includes changes that support working with submodules
from a superproject commit because "branch --recurse-submodules" (and
future commands) need to read .gitmodules and gitlinks from the
superproject commit, but submodules are typically read from the
filesystem's .gitmodules and the index's gitlinks. These changes are:
* add a submodules_of_tree() helper that gives the relevant
information of an in-tree submodule (e.g. path and oid) and
initializes the repository
* add is_tree_submodule_active() by adding a treeish_name parameter to
is_submodule_active()
* add the "submoduleNotUpdated" advice to advise users to update the
submodules in their trees
Incidentally, fix an incorrect usage string that combined the 'list'
usage of git branch (-l) with the 'create' usage; this string has been
incorrect since its inception, a8dfd5eac4 (Make builtin-branch.c use
parse_options., 2007-10-07).
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug that's been here since 7cc8f97108 (pack-objects: implement
bitmap writing, 2013-12-21), we did not call stop_progress() if we
reached the early exit in this function.
We could call stop_progress() before we return, but better yet is to
defer calling start_progress() until we need it. For now this only
matters in practice because we'd previously omit the "region_leave"
for the progress trace2 event.
Suggested-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug that's been with us ever since 98a1364740 (trace2: log
progress time and throughput, 2020-05-12), when the
stop_progress_msg() API was used we didn't log a "region_leave" for
the "region_enter" we start in "start_progress_delay()".
The only user of the "stop_progress_msg()" function is
"index-pack". Let's add a previously failing test to check that we
have the same number of "region_enter" and "region_leave" events, with
"-v" we'll log progress even in the test environment.
In addition to that we've had a submarine bug here introduced with
9d81ecb52b (progress: add sparse mode to force 100% complete message,
2019-03-21). The "start_sparse_progress()" API would only do the right
thing if the progress was ended with "stop_progress()", not
"stop_progress_msg()".
The only user of that API uses "stop_progress()", but let's still fix
that along with the trace2 issue by making "stop_progress()" a trivial
wrapper for "stop_progress_msg()".
We can also drop the "if (progress)" test from
"finish_if_sparse()". It's now a helper for the small
"stop_progress_msg()" function. We'll already have returned from it if
"progress" is "NULL".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create two new static helpers for the stop_progress() and
stop_progress_msg() functions.
As we'll see in the subsequent commit having those two split up
doesn't make much sense, and results in a bug in how we log to
trace2. This narrow preparatory change makes the diff for that
subsequent change smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 98a1364740 (trace2: log progress time and throughput,
2020-05-12) stop_progress() dereferences a "struct progress **"
parameter in several places. Extract a dereferenced variable to reduce
clutter and make it clearer who needs to write to this parameter.
Now instead of using "*p_progress" several times in stop_progress() we
check it once for NULL and then use a dereferenced "progress" variable
thereafter. This uses the same pattern as the adjacent
stop_progress_msg() function, see ac900fddb7 (progress: don't
dereference before checking for NULL, 2020-08-10).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix an inconsistency introduced in dc6a0757c4 (make struct progress
an opaque type, 2007-10-30) and rename the "progress" parameters to
stop_progress{,_msg}() to "p_progress". Now these match the
corresponding parameters in the *.c code.
While we're at it let's move the definition of the former below the
latter, a subsequent change will start defining stop_progress() in
terms of stop_progress_msg(). Let's also remove the excess whitespace
at the end of the file.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test what happens when we "stop" without a "start", omit the "stop"
after a "start", or start two concurrent progress bars. This
extends the trace2 tests added in 98a1364740 (trace2: log progress
time and throughput, 2020-05-12).
These tests are not merely testing the helper, but invalid API usage
that can happen if the progress.c API is misused.
The "without stop" test will leak under SANITIZE=leak, since this
buggy use of the API will leak memory. But let's not skip it entirely,
or use the "!SANITIZE_LEAK" prerequisite check as we'd do with tests
that we're skipping due to leaks we haven't fixed yet. Instead
annotate the specific command that should skip leak checking with
custom $LSAN_OPTIONS[1].
1. https://github.com/google/sanitizers/wiki/AddressSanitizerLeakSanitizer
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the usage of the "test-tool progress" introduced in
2bb74b53a4 (Test the progress display, 2019-09-16) to take command
like "start" and "stop" on stdin, instead of running them implicitly.
This makes for tests that are easier to read, since the recipe will
mirror the API usage, and allows for easily testing invalid usage that
would yield (or should yield) a BUG(), e.g. providing two "start"
calls in a row. A subsequent commit will add such tests.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we have braces on one arm of an if/else all of them should have it,
per the CodingGuidelines's "When there are multiple arms to a
conditional[...]" advice. This formatting change makes a subsequent
commit smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in the test-progress helper, and mark the
corresponding "t0500-progress-display.sh" test as being leak-free
under SANITIZE=leak. This fixes a leak added in 2bb74b53a4 (Test the
progress display, 2019-09-16).
My 48f68715b1 (tr2: stop leaking "thread_name" memory, 2021-08-27)
had fixed another memory leak in this test (as it did some trace2
testing).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plain quoted exclamation mark renders as italics in the
Windows pdf help manual.
Fix this with back-tick quoting and surrounding double quotes
as exemplified by the gitignore.txt guide.
While at it, fix the surrounding double quotes for the other
special characters usages.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a GIT_COMPLETION_SHOW_ALL_COMMANDS=1 configuration setting to go
with the existing GIT_COMPLETION_SHOW_ALL=1 added in
c099f579b9 (completion: add GIT_COMPLETION_SHOW_ALL env var,
2020-08-19).
This will include plumbing commands such as "cat-file" in "git <TAB>"
and "git c<TAB>" completion. Without/with this I have 134 and 243
completion with git <TAB>, respectively.
It was already possible to do this by tweaking
GIT_TESTING_PORCELAIN_COMMAND_LIST= from the outside, that testing
variable was added in 84a9713106 (completion: let git provide the
completable command list, 2018-05-20). Doing this before loading
git-completion.bash worked:
export GIT_TESTING_PORCELAIN_COMMAND_LIST="$(git --list-cmds=builtins,main,list-mainporcelain,others,nohelpers,alias,list-complete,config)"
But such testing variables are not meant to be used from the outside,
and we make no guarantees that those internal won't change. So let's
expose this as a dedicated configuration knob.
It would be better to teach --list-cmds=* a new category which would
include all of these groups, but that's a larger change that we can
leave for some other time.
1. https://lore.kernel.org/git/CAGP6POJ9gwp+t-eP3TPkivBLLbNb2+qj=61Mehcj=1BgrVOSLA@mail.gmail.com/
Reported-by: Hongyi Zhao <hongyi.zhao@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change tests of git-completion.bash that re-source it to do so inside
a subshell. Re-sourcing it will clobber variables it sets, and in the
case of the "GIT_COMPLETION_SHOW_ALL=1" test added in
ca2d62b787 (parse-options: don't complete option aliases by default,
2021-07-16) change the behavior of the completion persistently.
Aside from the addition of "(" and ")" on new lines this is an
indentation-only change, only the "(" and ")" lines are changed under
"git diff -w".
So let's change that test, and for good measure do the same for the
three tests that precede it, which were added in
8b0eaa41f2 (completion: clear cached --options when sourcing the
completion script, 2018-03-22). The may not be wrong, but doing this
establishes a more reliable pattern for future tests, which might use
these as a template to copy.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As Documentation/CodingGuidelines says, our shell scripts
(including tests) are to use HT for indentation, but this script
uses 4-column indent with SP. Fix this.
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many invocations of the test_expect_success command in this
file are written in old style where the command, an optional
prerequisite, and the test title are written on separate
lines, and the executable script string begins on its own
line, and these lines are pasted together with backslashes
as necessary.
An invocation of the test_expect_success command in modern
test scripts however writes the prerequisite and the title
on the same line as the test_expect_success command itself,
and ends the line with a single quote that begins the
executable script string.
Update the style for uniformity.
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove mistaken right square brackets from "git-diff"
usage string. Make the usage string conform to "git-diff"
documentation (Documentation/git-diff.txt).
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normally diffs will contain a hunk header of the format
"@@ -2,2 +2,15 @@ code". However when there is only 1 line of
change, the unified diff format allows for the second comma
separated value to be omitted in either before or after
line counts.
This can produce hunk headers that look like
"@@ -2 +2,18 @@ code" or "@@ -2,2 +2 @@ code".
As a result, scan_hunk_header mistakenly returns the line
number as line count, which then results in unpredictable
parsing errors with the rest of the patch, including giving
multiple lines of output for a single commit.
Fix by explicitly setting line count to 1 when there is
no comma, and add a test.
apply.c contains this same logic except it is correct. A
worthwhile future project might be to unify these two diff
parsers so they both benefit from fixes.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clean up the tests for patch-id by moving file preparation
tasks inside the test body and redirecting files directly into
stdin instead of using 'cat'.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Doing diffs for merges are special; they should typically avoid history
simplification. For example, with
git log --diff-merges=first-parent -- path
the default history simplification would remove merge commits from
consideration if the file "path" matched the second parent. That is
counter to what the user wants when looking for first-parent diffs.
Similar comments can be made for --diff-merges=separate (which diffs
against both parents) and --diff-merges=remerge (which diffs against a
remerge of the merge commit).
However, history simplification still makes sense if not doing diffing
merges, and it also makes sense for the combined and dense-combined
forms of diffing merges (because both of those are defined to only show
a diff when the merge result at the relevant paths differs from *both*
parents).
So, for separate, first-parent, and remerge styles of diff-merges, turn
off history simplification.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recursive merge involves merging the merge bases of the two branches
being merged. Such an inner merge can itself generate conflict notices.
While such notices may be useful when initially trying to create a
merge, they seem to just be noise when investigating merges later with
--remerge-diff. (Especially when both sides of the outer merge resolved
the conflict the same way leading to no overall conflict.) Remove them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conflicts such as modify/delete, rename/rename, or file/directory are
not representable via content conflict markers, and the normal output
messages notifying users about these were dropped with --remerge-diff.
While we don't want these messages randomly shown before the commit
and diff headers, we do want them to still be shown; include them as
part of the diff headers instead.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When additional headers are provided, we need to
* add diff_filepairs to diff_queued_diff for each paths in the
additional headers map which, unless that path is part of
another diff_filepair already found in diff_queued_diff
* format the headers (colorization, line_prefix for --graph)
* make sure the various codepaths that attempt to return early
if there are "no changes" take into account the headers that
need to be shown.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When users run
git show --remerge-diff $MERGE_COMMIT
or
git log -p --remerge-diff ...
stdout is not an appropriate location to dump conflict messages, but we
do want to provide them to users. We will include them in the diff
headers instead...but for that to work, we need for any multiline
messages to replace newlines with both a newline and a space. Add a new
flag to signal when we want these messages modified in such a fashion,
and use it in path_msg() to modify these messages this way. Also, allow
a special prefix to be specified for these headers.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
path_msg() has the ability to mark messages as omittable, designed for
remerge-diff where we'll instead be showing conflict messages as diff
headers for a subsequent diff. While all these messages are very useful
when trying to create a merge initially, early use with the
--remerge-diff feature (the only user of this omittable conflict message
capability), suggests that the particular messages marked in this commit
are just noise when trying to see what changes users made to create a
merge commit. Mark them as omittable.
Note that there were already a few messages marked as omittable in
merge-ort when doing a remerge-diff, because the development of
--remerge-diff preceded the upstreaming of merge-ort and I was trying to
ensure merge-ort could handle all the necessary requirements. See
commit c5a6f65527 ("merge-ort: add modify/delete handling and delayed
output processing", 2020-12-03) for the initial details. For some
examples of already-marked-as-omittable messages, see either
"Auto-merging <path>" or some of the submodule update hints. This
commit just adds two more messages that should also be omittable.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of immediately printing ll-merge warnings to stderr, we save
them in our output strbuf. Besides allowing us to move these warnings
to a special file for --remerge-diff, this has two other benefits for
regular merges done by merge-ort:
* The deferral of messages ensures we can print all messages about
any given path together (merge-recursive was known to sometimes
intersperse messages about other paths, particularly when renames
were involved).
* The deferral of messages means we can avoid printing spurious
conflict messages when we just end up aborting due to local user
modifications in the way. (In contrast to merge-recursive.c which
prematurely checks for local modifications in the way via
unpack_trees() and gets the check wrong both in terms of false
positives and false negatives relative to renames, merge-ort does
not perform the local modifications in the way check until the
checkout() step after the full merge has been computed.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since some callers may want to send warning messages to somewhere other
than stdout/stderr, stop printing "warning: Cannot merge binary files"
from ll-merge and instead modify the return status of ll_merge() to
indicate when a merge of binary files has occurred. Message printing
probably does not belong in a "low-level merge" anyway.
This commit continues printing the message as-is, just from the callers
instead of within ll_merge(). Future changes will start handling the
message differently in the merge-ort codepath.
There was one special case here: the callers in rerere.c do NOT check
for and print such a message; since those code paths explicitly skip
over binary files, there is no reason to check for a return status of
LL_MERGE_BINARY_CONFLICT or print the related message.
Note that my methodology included first modifying ll_merge() to return
a struct, so that the compiler would catch all the callers for me and
ensure I had modified all of them. After modifying all of them, I then
changed the struct to an enum.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --remerge-diff option will need to create new blobs and trees
representing the "automatic merge" state. If one is traversing a
long project history, one can easily get hundreds of thousands of
loose objects generated during `log --remerge-diff`. However, none of
those loose objects are needed after we have completed our diff
operation; they can be summarily deleted.
Add a new helper function to tmp_objdir to discard all the contained
objects, and call it after each merge is handled.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When this option is specified, we remerge all (two parent) merge commits
and diff the actual merge commit to the automatically created version,
in order to show how users removed conflict markers, resolved the
different conflict versions, and potentially added new changes outside
of conflict regions in order to resolve semantic merge problems (or,
possibly, just to hide other random changes).
This capability works by creating a temporary object directory and
marking it as the primary object store. This makes it so that any blobs
or trees created during the automatic merge are easily removable
afterwards by just deleting all objects from the temporary object
directory.
There are a few ways that this implementation is suboptimal:
* `log --remerge-diff` becomes slow, because the temporary object
directory can fill with many loose objects while running
* the log output can be muddied with misplaced "warning: cannot merge
binary files" messages, since ll-merge.c unconditionally writes those
messages to stderr while running instead of allowing callers to
manage them.
* important conflict and warning messages are simply dropped; thus for
conflicts like modify/delete or rename/rename or file/directory which
are not representable with content conflict markers, there may be no
way for a user of --remerge-diff to know that there had been a
conflict which was resolved (and which possibly motivated other
changes in the merge commit).
* when fixing the previous issue, note that some unimportant conflict
and warning messages might start being included. We should instead
make sure these remain dropped.
Subsequent commits will address these issues.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give the traditional default fetch.negotiationAlgorithm the name
'consecutive'. Also allow a choice of 'default' to have Git decide
between the choices (currently, picking 'skipping' if
feature.experimental is true and 'consecutive' otherwise). Update the
documentation accordingly.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit af3a67de01 ("negotiator: unknown fetch.negotiationAlgorithm
should error out", 2018-08-01), error handling for an unknown
fetch.negotiationAlgorithm was added with the code die()ing. This was
also added to the documentation for the fetch.negotiationAlgorithm
option, to make it explicit that the code would die on unknown values.
This behavior was lost with commit aaf633c2ad ("repo-settings: create
feature.experimental setting", 2019-08-13). Restore it so that the
behavior again matches the documentation.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 3050b6dfc7 (repo-settings.c: simplify the setup,
2021-09-21), the branch for handling fetch.negotiationAlgorithm=default
was deleted. Since this value is documented in
Documentation/config/fetch.txt, restore the check for this value.
Note that this change caused an observable bug: if someone sets
feature.experimental=true in config, and then passes "-c
fetch.negotiationAlgorithm=default" on the command line in an attempt to
override the config, then the override is ignored. Fix the bug by not
ignoring the value of "default".
Technically, before commit 3050b6dfc7, repo-settings would treat any
fetch.negotiationAlgorithm value other than "skipping" or "noop" as a
request for "default", but I think it probably makes more sense to
ignore such broken requests and leave fetch.negotiationAlgorithm with
the default value rather than the value of "default". (If that sounds
confusing, note that "default" is usually the default value, but when
feature.experimental=true, "skipping" is the default value.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix misbehavior in Git.pm that dates back to the very first version of
the library in git.git added in b1edc53d06 (Introduce Git.pm (v4),
2006-06-24). When we fail to execute a command we shouldn't ignore all
signals, those can happen e.g. if abort() is called, or if the command
segfaults.
Because of this we'd consider e.g. a command that died due to LSAN
exiting with abort() successful, as is the case with the tests listed
as running successfully with SANITIZE=leak in 9081a421a6 (checkout:
fix "branch info" memory leaks, 2021-11-16). We did run them
successfully, but only because we ignored these errors.
This was then made worse by the use of "abort_on_error=1" for LSAN
added in 85b81b35ff (test-lib: set LSAN_OPTIONS to abort by default,
2017-09-05). Doing that makes sense, but without providing that option
we'd have a "$? >> 8" of "23" on failure, with abort_on_error=1 we'll
get "0".
All of our tests pass even without the SIGPIPE exception being added
here, but as the code appears to have been trying to ignore it let's
keep ignoring it for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing a hidden ref, e.g.:
$ git push origin HEAD:refs/hidden/foo
"receive-pack" will reject our request with an error message like this:
! [remote rejected] HEAD -> refs/hidden/foo (deny updating a hidden ref)
The remote side ("git-receive-pack") will not create the hidden ref as
expected, but the pack file sent by "git-send-pack" is left inside the
remote repository. I.e. the quarantine directory is not purged as it
should be.
Add a checkpoint before calling "tmp_objdir_migrate()" and after calling
the "pre-receive" hook to purge that temporary data in the quarantine
area when there is no command ready to run.
The reason we do not add the checkpoint before the "pre-receive" hook,
but after it, is that the "pre-receive" hook is called with a switch-off
"skip_broken" flag, and all commands, even broken ones, should be fed
by calling "feed_receive_hook()".
Add a new test case in t5516 as well.
Helped-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Helped-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Chen Bojun <bojun.cbj@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consolidate the logic for deciding when to create a new branch in
cmd_branch(), and save the result for reuse. Besides making the function
more explicit, this allows us to validate options that can only be used
when creating a branch. Such an option does not exist yet, but one will
be introduced in a subsequent commit.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a dry_run parameter to create_branch() such that dry_run = 1 will
validate a new branch without trying to create it. This will be used in
`git branch --recurse-submodules` to ensure that the new branch can be
created in all submodules.
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the previous commit, there are no more invocations of
create_branch() that do not create a branch because:
* BRANCH_TRACK_OVERRIDE is no longer passed
* clobber_head_ok = true and force = false is never passed
Assert these situations, delete dead code and ensure that we're handling
clobber_head_ok and force correctly by introducing tests for `git branch
--force`. As a result, create_branch() now always creates a branch.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit is preparation for a future commit that will simplify
create_branch() so that it always creates a branch. This will allow
create_branch() to accept a dry_run parameter (which is needed for "git
branch --recurse-submodules").
create_branch() used to always create a branch, but 4fc5006676 (Add
branch --set-upstream, 2010-01-18) changed it to also be able to set
tracking information without creating a branch.
Refactor the code that sets tracking information into its own functions
dwim_branch_start() and dwim_and_setup_tracking(). Also change an
invocation of create_branch() in cmd_branch() in builtin/branch.c to use
dwim_and_setup_tracking(), since that invocation is only for setting
tracking information (in "git branch --set-upstream-to").
As of this commit, create_branch() is no longer invoked in a way that
does not create branches.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `merge.ff` is set to `only` in .gitconfig, `git subtree pull` will
fail with error `fatal: Not possible to fast-forward, aborting.`, but
the command does want to make merges in these places. Add `--no-ff`
argument to `git merge` to enforce this behaviour.
Signed-off-by: Thomas Koutcher <thomas.koutcher@online.fr>
Reviewed-by: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests as REFFILES if they rely on packed refs. Use ref-store
helper to create bogus refs.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reftable backend doesn't support mere existence of reflogs.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Deleting a ref in reftable just records a (ObjectID => ZeroID)
transaction in the reflog. To ensure 'for_each_reflog()' test below
works, explictly delete reflogs for deleted refs.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pruning refs fails, we print an error to stderr, but still
exit 0 from 'git fetch'. Since this is a genuine error, fetch
should be exiting with some non-zero exit code. Make it so.
The --prune option was introduced in f360d844de ("builtin-fetch: add
--prune option", 2009-11-10). Unfortunately it's unclear from that
commit whether ignoring the exit code was an oversight or
intentional, but it feels like an oversight.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in 2.35 that roke the use of "rebase" and "stash"
in a secondary worktree.
* en/keep-cwd:
sequencer, stash: fix running from worktree subdir
The `git` executable has these two very useful options:
-C <directory>:
switch to the specified directory before performing any actions
-c <key>=<value>:
temporarily configure this setting for the duration of the
specified scalar subcommand
With this commit, we teach the `scalar` executable the same trick.
Note: It might look like a good idea to try to reuse the
`handle_options()` function in `git.c` instead of replicating only the
`-c`/`-C` part. However, that function is not only not in `libgit.a`, it
is also intricately entangled with the rest of the code in `git.c` that
is necessary e.g. to handle `--paginate`. Besides, no other option
handled by that `handle_options()` function is relevant to Scalar,
therefore the cost of refactoring vastly would outweigh the benefit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message when invoking a negotiate-only fetch without providing
any tips incorrectly refers to a --negotiate-tip=* argument. Fix this to
use the actual argument, --negotiation-tip=*.
Signed-off-by: Robert Coup <robert@coup.net.nz>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were introduced in commit 55dfcf9591 ("sparse-checkout: clear
tracked sparse dirs", 2021-09-08) and missed in my review at the time.
Plug the leaks.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--diff-filter=<bits>` option allows to filter the diff by certain
criteria, for example `R` to only show renamed files. It also supports
negating a filter via a down-cased letter, i.e. `r` to show _everything
but_ renamed files.
However, the code is a bit overzealous when trying to figure out whether
`git diff` should start with all diff-filters turned on because the user
provided a lower-case letter: if the `--diff-filter` argument starts
with an upper-case letter, we must not start with all bits turned on.
Even worse, it is possible to specify the diff filters in multiple,
separate options, e.g. `--diff-filter=AM [...] --diff-filter=m`.
Let's accumulate the include/exclude filters independently, and only
special-case the "only exclude filters were specified" case after
parsing the options altogether.
Note: The code replaced by this commit took pains to avoid setting any
unused bits of `options->filter`. That was unnecessary, though, as all
accesses happen via the `filter_bit_tst()` function using specific bits,
and setting the unused bits has no effect. Therefore, we can simplify
the code by using `~0` (or in this instance, `~<unwanted-bit>`).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This prepares for a more careful handling of the `--diff-filter`
options over the next few commits.
This commit is best viewed with `--color-moved`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, before we had `--intent-to-add`, there was no way that `git
diff-files` could see added files: if a file did not exist in the index,
`git diff-files` would not show it because it looks only at worktree
files when there is an index entry at the same path.
We used this example in the documentation of the diff options to explain
that not every `--diff-filter=<option>` has an effect in all scenarios.
Even when we added `--intent-to-add`, the comment was still correct,
because initially we showed such files as modified instead of added.
However, when that bug was fixed in feea6946a5 (diff-files: treat
"i-t-a" files as "not-in-index", 2020-06-20), the comment in the
documentation became incorrect.
Let's just remove it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 8a2cd3f512 (stash: remove the stash.useBuiltin setting, 2020-03-03),
we removed support for `stash.useBuiltin`, but left a warning in its
place.
After almost two years, and several major versions, it is time to remove
even that warning.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 8a2cd3f512 (stash: remove the stash.useBuiltin setting, 2020-03-03),
we removed the setting, and for a couple of major versions, we still
documented the setting, telling users that it is gone.
We can now safely remove even the documentation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 90a6bb98d1 (legacy stash -p: respect the add.interactive.usebuiltin
setting, 2019-12-21), we added support to use the built-in `add -p` from
the scripted `stash -p`.
In 8a2cd3f512 (stash: remove the stash.useBuiltin setting, 2020-03-03),
we retired the scripted `stash` (including the scripted `stash -p`).
Therefore this support is no longer necessary.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 8a2cd3f512 (stash: remove the stash.useBuiltin setting, 2020-03-03),
we removed `git-legacy-stash.sh`. But `git-sh-setup.sh` somehow still
thinks about it. Let's just not.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the "describe your changes well" section to cover whom we are
trying to help by doing so in the first place.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We give a guidance for proposed log message to write problem
statement first, followed by the reasoning behind, and recipe for,
the solution. Clarify that we describe the situation _before_ the
proposed patch is applied in the present tense (not in the past
tense e.g. "we used to do X, but thanks to this commit we now do Y")
for consistency.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce the allocations done by show_ambiguous_object() by moving the
"desc" strbuf into the "struct ambiguous_output" introduced in the
preceding commit.
This doesn't matter for optimization purposes, but since we're
accumulating a "struct strbuf advice" anyway let's follow that pattern
and add a "struct strbuf sb", we can then strbuf_reset() it rather
than calling strbuf_release() for each call to
show_ambiguous_object().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "The candidates are" header that's shown for ambiguous
objects to be shown after we've iterated over all of the objects.
If we get any errors while doing so we don't want to split up the the
header and the list as a result. The two will now be printed together,
as shown in the updated testcase.
As we're accumulating the lines into as "struct strbuf" before
emitting them we need to add a trailing newline to the call in
show_ambiguous_object(). This and the change from "The candidates
are:" to "The candidates are:\n%s" helps to give translators more
context.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the ambiguous tag object output nicer in the case of tag objects
such as ebf3c04b26 (Git 2.32, 2021-06-06) by including the date in
the "tagger" header. I.e.:
$ git rev-parse b7e68
error: short object ID b7e68 is ambiguous
hint: The candidates are:
hint: b7e68c41d9 tag 2021-06-06 - v2.32.0
hint: b7e68ae18e0 commit 2019-12-23 - bisect: use the standard 'if (!var)' way to check for 0
hint: b7e68f6b413 tree
hint: b7e68490b97 blob
b7e68
[...]
Before this we'd emit a "tag" line without a date, e.g.:
hint: b7e68c41d9 tag v2.32.0
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the output of show_ambiguous_object() added in [1] and last
tweaked in [2] and the preceding commit to be more friendly to
translators.
By being able to customize the "<SP><SP>%s\n" format we're even ready
for RTL languages, who'd presumably like to change that to
"%s<SP><SP>\n".
In the case of the existing "tag [tag could not be parsed]" output
we'll now instead emit "[bad tag, could not parse it]". This is
consistent with the "[bad object]" output. Rephrasing the message like
this is possible because we're not unconditionally adding the
type_name() at the beginning.
1. 1ffa26c461 (get_short_sha1: list ambiguous objects on error,
2016-09-26)
2. 5cc044e025 (get_short_oid: sort ambiguous objects by type,
then SHA-1, 2018-05-10)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow-up the handling of OBJ_BAD in the preceding commit and
explicitly handle those cases where parse_tag() fails, or we don't end
up with a non-NULL pointer in in tag->tag.
If we run into such a tag we'd previously be silent about it. We
really should also be handling these batter in parse_tag_buffer() by
being more eager to emit an error(), instead of silently aborting with
"return -1;".
One example of such a tag is the one that's tested for in
"t3800-mktag.sh", where the code takes the "size <
the_hash_algo->hexsz + 24" branch.
But in lieu of earlier missing "error" output let's show the user
something to indicate why we're not showing a tag message in these
cases, now instead of showing:
hint: deadbeef tag
We'll instead display:
hint: deadbeef tag [tag could not be parsed]
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend the "unknown type" handling in the code that displays the
ambiguous object list to assert() that we're either going to get the
"real" object types we can pass to type_name(), or a -1 (OBJ_BAD)
return value from oid_object_info().
See [1] for the current output, and [1] for the commit that added the
"unknown type" handling.
We are never going to get an "unknown type" in the sense of custom
types crafted with "hash-object --literally", since we're not using
the OBJECT_INFO_ALLOW_UNKNOWN_TYPE flag.
If we manage to otherwise unpack such an object without errors we'll
die() in parse_loose_header_extended() called by sort_ambiguous()
before we get to show_ambiguous_object(), as is asserted by the test
added in the preceding commit.
So saying "unknown type" here was always misleading, we really meant
to say that we had a failure parsing the object at all, i.e. that we
had repository corruption. If the problem is only that it's type is
unknown we won't reach this code.
So let's emit a generic "[bad object]" instead. As our tests added in
the preceding commit show, we'll have emitted various "error" output
already in those cases.
We should do better in the truly "unknown type" cases, which we'd need
to handle if we were passing down the OBJECT_INFO_ALLOW_UNKNOWN_TYPE
flag. But let's leave that for some future improvement. In a
subsequent commit I'll improve the output we do show, and not having
to handle the "unknown type" (as in OBJECT_INFO_ALLOW_UNKNOWN_TYPE)
simplifies that change.
1. 5cc044e025 (get_short_oid: sort ambiguous objects by type,
then SHA-1, 2018-05-10)
2. 1ffa26c461 (get_short_sha1: list ambiguous objects on error,
2016-09-26)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the tests for ambiguous objects to check how we handle objects
where we return OBJ_BAD when trying to parse them. As noted in [1] we
have a blindspot when it comes to this behavior.
Since we need to add new test data here let's extend these tests to be
tested under SHA-256, in d7a2fc8249 (t1512: skip test if not using
SHA-1, 2018-05-13) all of the existing tests were skipped, as they
rely on specific SHA-1 object IDs.
For these tests it only matters that the first 4 characters of the OID
prefix are the same for both SHA-1 and SHA-256. This uses strings that
I mined, and have the same prefix when hashed with both.
We "test_cmp" the full output to guard against any future regressions,
and because a subsequent commit will tweak it. Showing a diff of how
the output changes is helpful to explain those subsequent commits.
The "sed" invocation in test_cmp_failed_rev_parse() doesn't need a
"/g" because under both SHA-1 and SHA-256 we'll wildcard match any
trailing part of the OID after our known starting prefix. We'd like to
convert all of that to just "..." for the "test_cmp" which follows.
1. https://lore.kernel.org/git/YZwbphPpfGk78w2f@coredump.intra.peff.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When opening a MIDX/pack-bitmap, we call open_midx_bitmap_1() or
open_pack_bitmap_1() respectively in a loop over the set of MIDXs/packs.
By design, these functions are supposed to be called over every pack and
MIDX, since only one of them should have a valid bitmap.
Ordinarily we return '0' from these two functions in order to indicate
that we successfully loaded a bitmap To signal that we couldn't load a
bitmap corresponding to the MIDX/pack (either because one doesn't exist,
or because there was an error with loading it), we can return '-1'. In
either case, the callers each enumerate all MIDXs/packs to ensure that
at most one bitmap per-kind is present.
But when we fail to load a bitmap that does exist (for example, loading
a MIDX bitmap without finding a corresponding reverse index), we'll
return -1 but leave the 'midx' field non-NULL. So when we fallback to
loading a pack bitmap, we'll complain that the bitmap we're trying to
populate already is "opened", even though it isn't.
Rectify this by setting the '->pack' and '->midx' field back to NULL as
appropriate. Two tests are added: one to ensure that the MIDX-to-pack
bitmap fallback works, and another to ensure we still complain when
there are multiple pack bitmaps in a repository.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a MIDX contains the new `RIDX` chunk, ensure that the reverse index
is read from it instead of the on-disk .rev file. Since we need to
encode the object order in the MIDX itself for correctness reasons,
there is no point in storing the same data again outside of the MIDX.
So, this patch stops writing separate .rev files, and reads it out of
the MIDX itself. This is possible to do with relatively little new code,
since the format of the RIDX chunk is identical to the data in the .rev
file. In other words, we can implement this by pointing the
`revindex_data` field at the reverse index chunk of the MIDX instead of
the .rev file without any other changes.
Note that we have two knobs that are adjusted for the new tests:
GIT_TEST_MIDX_WRITE_REV and GIT_TEST_MIDX_READ_RIDX. The former controls
whether the MIDX .rev is written at all, and the latter controls whether
we read the MIDX's RIDX chunk.
Both are necessary to ensure that the test added at the beginning of
this series continues to work. This is because we always need to write
the RIDX chunk in the MIDX in order to change its checksum, but we want
to make sure reading the existing .rev file still works (since the RIDX
chunk takes precedence by default).
Arguably this isn't a very interesting mode to test, because the
precedence rules mean that we'll always read the RIDX chunk over the
.rev file. But it makes it impossible for a user to induce corruption in
their repository by adjusting the test knobs (since if we had an
either/or knob they could stop writing the RIDX chunk, allowing them to
tweak the MIDX's object order without changing its checksum).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To prepare for reading the reverse index data out of the MIDX itself,
teach the `test_rev_exists` function to take an expected "source" for
the reverse index data.
When given "rev", it asserts that the MIDX's `.rev` file exists, and is
loaded when verifying the integrity of its bitmaps. Otherwise, it
ensures that trace2 reports the source of the reverse index data as the
same string which was given to test_rev_exists().
The following patch will implement reading the reverse index data from
the MIDX itself.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t5326, we have a handful of tests that we would like to run twice:
once using the MIDX's new `RIDX` chunk as the source of the
reverse-index cache, and once using the separate `.rev` file.
But because these tests mutate the state of the underlying repository,
and then make assumptions about those mutations occurring in a certain
sequence, simply running the tests twice in the same repository is
awkward.
Instead, extract the core of interesting tests into t/lib-bitmap.sh to
prepare for them to be run twice, each in a separate test script. This
means that they can each operate on a separate repository, removing any
concerns about mutating state.
For now, this patch is a strict cut-and-paste of some tests from t5326.
The tests which did not move are not interesting with respect to the
source of their reverse index data.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To determine which source of data is used for the MIDX's reverse index
cache, introduce a helper which forces loading the reverse index, and
then looks for the special trace2 event introduced in a previous commit.
For now, this helper just looks for when the legacy MIDX .rev file was
loaded, but in a subsequent commit will become parameterized over the
the reverse index's source.
This function replaces checking for the existence of the .rev file. We
could write a similar helper to ensure that the .rev file is cleaned up
after repacking, but it will make subsequent tests more difficult to
write, and provides marginal value since we already check that the MIDX
.bitmap file is removed.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The core.multiPackIndex config became true by default back in 18e449f86b
(midx: enable core.multiPackIndex by default, 2020-09-25), so it is no
longer necessary to enable it explicitly.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a subsequent commit, we'll use the MIDX's new 'RIDX' chunk as a
source for the reverse index's data. But it will be useful for tests to
be able to determine whether the reverse index was loaded from the
separate .rev file, or from a chunk within the MIDX.
To instrument this, add a trace2 event which the tests can look for in
order to determine the reverse index's source.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patch demonstrates a bug where a MIDX's auxiliary object
order can become out of sync with a MIDX bitmap.
This is because of two confounding factors:
- First, the object order is stored in a file which is named according
to the multi-pack index's checksum, and the MIDX does not store the
object order. This means that the object order can change without
altering the checksum.
- But the .rev file is moved into place with finalize_object_file(),
which link(2)'s the file into place instead of renaming it. For us,
that means that a modified .rev file will not be moved into place if
MIDX's checksum was unchanged.
This fix is to force the MIDX's checksum to change when the preferred
pack changes but the set of packs contained in the MIDX does not. In
other words, when the object order changes, the MIDX's checksum needs to
change with it (regardless of whether the MIDX is tracking the same or
different packs).
This prevents a race whereby changing the object order (but not the
packs themselves) enables a reader to see the new .rev file with the old
MIDX, or similarly seeing the new bitmap with the old object order.
But why can't we just stop hardlinking the .rev into place instead
adding additional data to the MIDX? Suppose that's what we did. Then
when we go to generate the new bitmap, we'll load the old MIDX bitmap,
along with the MIDX that it references. That's fine, since the new MIDX
isn't moved into place until after the new bitmap is generated. But the
new object order *has* been moved into place. So we'll read the old
bitmaps in the new order when generating the new bitmap file, meaning
that without this secondary change, bitmap generation itself would
become a victim of the race described here.
This can all be prevented by forcing the MIDX's checksum to change when
the object order does. By embedding the entire object order into the
MIDX, we do just that. That is, the MIDX's checksum will change in
response to any perturbation of the underlying object order. In t5326,
this will cause the MIDX's checksum to update (even without changing the
set of packs in the MIDX), preventing the stale read problem.
Note that this makes it safe to continue to link(2) the MIDX .rev file
into place, since it is now impossible to have a .rev file that is
out-of-sync with the MIDX whose checksum it references. (But we will do
away with MIDX .rev files later in this series anyway, so this is
somewhat of a moot point).
In theory, it is possible to store a "fingerprint" of the full object
order here, so long as that fingerprint changes at least as often as the
full object order does. Some possibilities here include storing the
identity of the preferred pack, along with the mtimes of the
non-preferred packs in a consistent order. But storing a limited part of
the information makes it difficult to reason about whether or not there
are gaps between the two that would cause us to get bitten by this bug
again.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch demonstrates a cause of bitmap corruption that can occur when
the contents of the multi-pack index does not change, but the underlying
object order does.
In this example, we have a MIDX containing two packs, each with a
distinct set of objects (pack A corresponds to the tree, blob, and
commit from the first patch, and pack B corresponds to the second
patch).
First, a MIDX is written where the 'A' pack is preferred. As expected,
the bitmaps generated there are in-tact. But then, we generate an
identical MIDX with a different object order: this time preferring pack
'B'.
Due to a bug which will be explained and fixed in the following commit,
the MIDX is updated, but the .rev file is not, causing the .bitmap file
to be read incorrectly. Specifically, the .bitmap file will contain
correct data, but the auxiliary object order in the .rev file is stale,
causing readers to get confused by reading the new bitmaps using the old
object order.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in 2.35 that roke the use of "rebase" and "stash"
in a secondary worktree.
* en/keep-cwd:
sequencer, stash: fix running from worktree subdir
The tree is not open for new development yet, but let's mark the
beginning of the new cycle before we start merging down regression
fix topics.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an apostrophe to "signatures" to indicate the possessive
relationship in "the signature's creation".
Signed-off-by: Greg Hurrell <greg@hurrell.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Specifically, replace the tab between "the" and "first" with a space.
Signed-off-by: Greg Hurrell <greg@hurrell.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the now-unused "failure_errno" parameter from the
refs_resolve_ref_unsafe() signature. In my recent 96f6623ada (Merge
branch 'ab/refs-errno-cleanup', 2021-11-29) series we made all of its
callers explicitly request the errno via an output parameter.
As that series shows all but one caller ended up passing in a
boilerplate "ignore_errno", since they only cared about whether the
return value was NULL or not, i.e. if the ref could be resolved.
There was one small issue with that series fixed with a follow-up in
31e3912369 (Merge branch 'ab/refs-errno-cleanup', 2022-01-14) a small
bug in that series was fixed.
After those two there was one caller left in sequencer.c that used the
"failure_errno', but as of the preceding commit it uses a boilerplate
"ignore_errno" instead.
This leaves the public refs API without any use of "failure_errno" at
all. We could still do with a bit of cleanup and generalization
between refs.c and refs/files-backend.c before the "reftable"
integration lands, but that's all internal to the reference code
itself.
So let's remove this output parameter. Not only isn't it used now, but
it's unlikely that we'll want it again in the future. We'd like to
slowly move the refs API to a more file-backend independent way of
communicating error codes, having it use a "failure_errno" was only
the first step in that direction. If this or any other function needs
to communicate what specifically is wrong with the requested "refname"
it'll be better to have the function set some output enum of
well-defined error states than piggy-backend on "errno".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code that was faithfully migrated to the new "resolve_errno"
API in ed90f04155 (refs API: make resolve_ref_unsafe() not set errno,
2021-10-16) to stop caring about the errno at all.
When we fail to resolve "HEAD" after the sequencer runs it doesn't
really help to say what the "errno" value is, since the fake backend
errno may or may not reflect anything real about the state of the
".git/HEAD". With the upcoming reftable backend this fakery will
become even more pronounced.
So let's just die() instead of die_errno() here. This will also help
simplify the refs_resolve_ref_unsafe() API. This was the only user of
it that wasn't ignoring the "failure_errno" output parameter.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that reset_head() can handle the initial checkout of onto
correctly use it in the "merge" backend instead of forking "git
checkout". This opens the way for us to stop calling the
post-checkout hook in the future. Not running "git checkout" means
that "rebase -i/m" no longer recurse submodules when checking out
"onto" (thanks to Philippe Blain for pointing this out). As the rest
of rebase does not know what to do with submodules this is probably a
good thing. When using merge-ort rebase ought be able to handle
submodules correctly if it parsed the submodule config, such a change
is left for a future patch series.
The "apply" based rebase has avoided forking git checkout
since ac7f467fef ("builtin/rebase: support running "git rebase
<upstream>"", 2018-08-07). The code that handles the checkout was
moved into libgit by b309a97108 ("reset: extract reset_head() from
rebase", 2020-04-07).
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the start of a rebase, ORIG_HEAD is updated to the tip of the
branch being rebased. Unfortunately reset_head() always uses the
current value of HEAD for this which is incorrect if the rebase is
started with "git rebase <upstream> <branch>" as in that case
ORIG_HEAD should be updated to <branch>. This only affects the "apply"
backend as the "merge" backend does not yet use reset_head() for the
initial checkout. Fix this by passing in orig_head when calling
reset_head() and add some regression tests.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
move_to_original_branch() passes the message intended for the branch
reflog as `orig_head_msg`. Fix this by adding a `branch_msg` member to
struct reset_head_opts and add a regression test. Note that these
reflog messages do not respect GIT_REFLOG_ACTION. They are not alone
in that and will be fixed in a future series.
The "merge" backend already has tests that check both the branch and
HEAD reflogs.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function takes a confusingly large number of parameters which
makes it difficult to remember which order to pass them in. The
following commits will add a couple more parameters which makes the
problem worse. To address this change the function to take a struct of
options. Using a struct means that it is no longer necessary to
remember which order to pass the parameters in and anyone reading the
code can easily see which value is passed to each parameter.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If ORIG_HEAD is not set by passing RESET_ORIG_HEAD then there is no
need to pass anything for reflog_orig_head. In addition to the callers
fixed in this commit move_to_original_branch() also passes
reflog_orig_head without setting ORIG_HEAD. That caller is mistakenly
passing the message it wants to put in the branch reflog which is not
currently possible so we delay fixing that caller until we can pass
the message as the branch reflog.
A later commit will make it a BUG() to pass reflog_orig_head without
RESET_ORIG_HEAD, that changes cannot be done here as it needs to wait
for move_to_original_branch() to be fixed first.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default_reflog parameter of create_autostash() is passed to
reset_head(). However as creating a stash does not involve updating
any refs the parameter is not used by reset_head(). Removing the
parameter from create_autostash() simplifies the callers.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This parameter is only needed when a ref is going to be updated and
the caller does not pass an explicit reflog message. Callers that are
only discarding uncommitted changes in the working tree such as such
as "rebase --skip" or create_autostash() do not update any refs so
should not have to worry about passing this parameter.
This change is not intended to have any user visible changes. The
pointer comparison between `oid` and `&head_oid` checks that the
caller did not pass an oid to be checked out. As no callers pass
RESET_HEAD_RUN_POST_CHECKOUT_HOOK without passing an oid there are
no changes to when the post-checkout hook is run. As update_ref() only
updates the ref if the oid passed to it differs from the current ref
there are no changes to when HEAD is updated.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next commit we will stop trying to update HEAD when we are
removing uncommitted changes from the working tree. Move the code that
updates the refs to its own function in preparation for that.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only use of the action parameter is to setup the error messages
for unpack_trees(). All but two cases pass either "checkout" or
"reset". The case that passes "reset --hard" would be better passing
"reset" so that the error messages match the builtin reset command
like all the other callers that are doing a reset. The case that
passes "Fast-forwarded" is only updating HEAD and so the parameter is
unused in that case as it does not call unpack_trees(). The value to
pass to setup_unpack_trees_porcelain() can be determined by checking
whether flags contains RESET_HEAD_HARD without the caller having to
specify it.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hook should only be run if the worktree and refs were successfully
updated. This primarily affects "rebase --apply" but also "rebase
--merge" when it fast-forwards.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If "git rebase [--apply|--merge] <upstream> <branch>" detects that
<upstream> is an ancestor of <branch> then it will fast-forward and
checkout <branch>. Normally a checkout or picking a commit during a
rebase will refuse to overwrite untracked files, however rebase does
overwrite untracked files when checking out <branch>.
The fix is to only set reset in `unpack_tree_opts` if flags contains
`RESET_HEAD_HARD`. t5403 may seem like an odd home for the new test
but it will be extended in the next commit to check that the
post-checkout hook is not run when the checkout fails.
The test for `!detach_head` dates back to the
original implementation of reset_head() in
ac7f467fef ("builtin/rebase: support running "git rebase <upstream>"",
2018-08-07) and was correct until e65123a71d
("builtin rebase: support `git rebase <upstream> <switch-to>`",
2018-09-04) started using reset_head() to checkout <switch-to> when
fast-forwarding.
Note that 480d3d6bf9 ("Change unpack_trees' 'reset' flag into an
enum", 2021-09-27) also fixes this bug as it changes reset_head() to
never remove untracked files. I think this fix is still worthwhile as
it makes it clear that the same settings are used for detached and
non-detached checkouts.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a rebase started with "rebase [--apply|--merge] <upstream> <branch>"
detects that <upstream> is an ancestor of <branch> then it fast-forwards
and checks out <branch>. Unfortunately in that case it passed the null
oid as the first argument to the post-checkout hook rather than the oid
of HEAD.
A side effect of this change is that the call to update_ref() which
updates HEAD now always receives the old value of HEAD. This provides
protection against another process updating HEAD during the checkout.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests only test the default backend and do not check that the
arguments passed to the hook are correct. Fix this by running the
tests with both backends and adding checks for the hook arguments.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code is heavily indented and it will be convenient later in the
series to have it in its own function.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commits bc3ae46b42 ("rebase: do not attempt to remove
startup_info->original_cwd", 2021-12-09) and 0fce211ccc ("stash: do not
attempt to remove startup_info->original_cwd", 2021-12-09), we wanted to
allow the subprocess to know which directory the parent process was
running from, so that the subprocess could protect it. However...
When run from a non-main worktree, setup_git_directory() will note
that the discovered git directory
(/PATH/TO/.git/worktree/non-main-worktree) does not match
DEFAULT_GIT_DIR_ENVIRONMENT (see setup_discovered_git_dir()), and
decide to set GIT_DIR in the environment. This matters because...
Whenever git is run with the GIT_DIR environment variable set, and
GIT_WORK_TREE not set, it presumes that '.' is the working tree. So...
This combination results in the subcommand being very confused about
the working tree. Fix it by also setting the GIT_WORK_TREE environment
variable along with setting cmd.dir.
A possibly more involved fix we could consider for later would be to
make setup.c set GIT_WORK_TREE whenever (a) it discovers both the git
directory and the working tree and (b) it decides to set GIT_DIR in the
environment. I did not attempt that here as such would be too big of a
change for a 2.35.1 release.
Test-case-by: Glen Choo <chooglen@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning a branchless and tagless but not refless remote using
protocol v0 or v1, Git calls transport_fetch_refs() with an empty ref
list. This makes the clone fail with the message "remote transport
reported error".
Git should have refrained from calling transport_fetch_refs(), just like
it does in the case that the remote is refless. Therefore, teach Git to
do this.
In protocol v2, this does not happen because the client passes
ref-prefix arguments that filter out non-branches and non-tags in the
ref advertisement, making the remote appear empty.
Note that this bug concerns logic in builtin/clone.c and only affects
cloning, not fetching.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a copy of uncompress2() implementation in compat/ so that we
can build with an older version of zlib that lack the function, and
the build procedure selects if it is used via the NO_UNCOMPRESS2
$(MAKE) variable. This is yet another "annoying" knob the porters
need to tweak on platforms that are not common enough to have the
default set in the config.mak.uname file.
Attempt to instead ask the system header <zlib.h> to decide if we
need the compatibility implementation. This is a deviation from the
way we have been handling the "compatiblity" features so far, and if
it can be done cleanly enough, it could work as a model for features
that need compatibility definition we discover in the future. With
that goal in mind, avoid expedient but ugly hacks, like shoving the
code that is conditionally compiled into an unrelated .c file, which
may not work in future cases---instead, take an approach that uses a
file that is independently compiled and stands on its own.
Compile and link compat/zlib-uncompress2.c file unconditionally, but
conditionally hide the implementation behind #if/#endif when zlib
version is 1.2.9 or newer, and unconditionally archive the resulting
object file in the libgit.a to be picked up by the linker.
There are a few things to note in the shape of the code base after
this change:
- We no longer use NO_UNCOMPRESS2 knob; if the system header
<zlib.h> claims a version that is more cent than the library
actually is, this would break, but it is easy to add it back when
we find such a system.
- The object file compat/zlib-uncompress2.o is always compiled and
archived in libgit.a, just like a few other compat/ object files
already are.
- The inclusion of <zlib.h> is done in <git-compat-util.h>; we used
to do so from <cache.h> which includes <git-compat-util.h> as the
first thing it does, so from the *.c codes, there is no practical
change.
- Until objects in libgit.a that is already used gains a reference
to the function, the reftable code will be the only one that
wants it, so libgit.a on the linker command line needs to appear
once more at the end to satisify the mutual dependency.
- Beat found a trick used by OpenSSL to avoid making the
conditionally-compiled object truly empty (apparently because
they had to deal with compilers that do not want to see an
effectively empty input file). Our compat/zlib-uncompress2.c
file borrows the same trick for portabilty.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mem_pool_alloc uses sizeof(uintmax_t) as a proxy for what should be
_Alignof(max_align_t) in C11. On most architectures this is sufficient
(though on m68k it is in fact overly strict, since the de-facto ABI,
which differs from the specified System V ABI, has the maximum alignment
of all types as 2 bytes), but on CHERI, and thus Arm's Morello
prototype, it is insufficient for any type that stores a pointer, which
must be aligned to 128 bits (on 64-bit architectures extended with
CHERI), whilst uintmax_t is a 64-bit integer.
Fix this by introducing our own approximation for max_align_t and a
means to compute _Alignof it without relying on C11. Currently this
union only contains uintmax_t and void *, but more types can be added as
needed.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We added an unrelated sanity checking that leads to a BUG() while
plugging a leak, which triggered in a repository with symrefs in
the local branch namespace that point at a ref outside. Partially
revert the change to avoid triggering the BUG().
* ab/checkout-branch-info-leakfix:
checkout: avoid BUG() when hitting a broken repository
... at least for now. So let's error out if we are even trying to
initialize the split index when the index is sparse, or when trying to
write the split index extension for a sparse index.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 61feddcdf2 (tests: disable GIT_TEST_SPLIT_INDEX for sparse index
tests, 2021-08-26), it was already called out that the split index
feature is incompatible with the sparse index feature, and its commit
message wondered aloud whether more checks would be required to ensure
that the split index and sparse index features aren't enabled at the
same time.
We are about to introduce such additional checks, and indeed, t1091
would utterly fail with them. Therefore, let's preemptively disable the
split index for the entirety of t1091.
This partially reverts above-mentioned patch because it covered only one
test case whereas we want to cover the entire test script.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 6e773527b6 (sparse-index: convert from full to sparse, 2021-03-30),
we introduced initial support for a sparse index, and were careful to
avoid converting to a sparse index in the presence of a split index.
However, when we _just_ read a freshly-initialized index, it might not
contain a split index even if _writing_ it will add one by virtue of
being asked for via the `GIT_TEST_SPLIT_INDEX` variable.
We did not notice any problems with checking _only_ for `split_index`
(and not `GIT_TEST_SPLIT_INDEX`) right until both
`vd/sparse-sparsity-fix-on-read` _and_ `vd/sparse-reset` were merged.
Those two topics' interplay triggers a bug in conjunction with running
t1091.15 when `GIT_TEST_SPLIT_INDEX=true` in the following way:
`vd/sparse-sparsity-fix-on-read` ensures that the index is made sparse
right after reading, and `vd/sparse-reset` ensures that the index is
made non-sparse again unless running in the `--soft` mode. Since the
split index feature is incompatible with the sparse index feature, we
see a symptom like this:
fatal: position for replacement 4 exceeds base index size 4
Let's fix this by avoiding the conversion to a sparse index when
`GIT_TEST_SPLIT_INDEX=true`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 9081a421 (checkout: fix "branch info" memory leaks, 2021-11-16)
cleaned up existing memory leaks, we added an unrelated sanity check
to ensure that a local branch is truly local and not a symref to
elsewhere that dies with BUG() otherwise. This was misguided in two
ways. First of all, such a tightening did not belong to a leak-fix
patch. And the condition it detected was *not* a bug in our program
but a problem in user data, where warning() or die() would have been
more appropriate.
As the condition is not fatal (the result of computing the local
branch name in the code that is involved in the faulty check is only
used as a textual label for the commit), let's revert the code to
the original state, i.e. strip "refs/heads/" to compute the local
branch name if possible, and otherwise leave it NULL. The consumer
of the information in merge_working_tree() is prepared to see NULL
in there and act accordingly.
cf. https://bugzilla.redhat.com/show_bug.cgi?id=2042920
Reported-by: Petr Šplíchal <psplicha@redhat.com>
Reported-by: Todd Zullinger <tmz@pobox.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were two commit_lists created in cmd_merge() that were only
conditionally free()'d. Add a quick conditional call to
free_commit_list() for each of them at the end of the function.
Testing this commit against t6404 under valgrind shows that this patch
fixes the following two leaks:
16 bytes in 1 blocks are definitely lost in loss record 16 of 126
at 0x484086F: malloc (vg_replace_malloc.c:380)
by 0x69FFEB: do_xmalloc (wrapper.c:41)
by 0x6A0073: xmalloc (wrapper.c:62)
by 0x52A72D: commit_list_insert (commit.c:556)
by 0x47FC93: reduce_parents (merge.c:1114)
by 0x4801EE: collect_parents (merge.c:1214)
by 0x480B56: cmd_merge (merge.c:1465)
by 0x40686E: run_builtin (git.c:464)
by 0x406C51: handle_builtin (git.c:716)
by 0x406E96: run_argv (git.c:783)
by 0x40730A: cmd_main (git.c:914)
by 0x4E7DFA: main (common-main.c:56)
8 (16 direct, 32 indirect) bytes in 1 blocks are definitely lost in \
loss record 61 of 126
at 0x484086F: malloc (vg_replace_malloc.c:380)
by 0x69FFEB: do_xmalloc (wrapper.c:41)
by 0x6A0073: xmalloc (wrapper.c:62)
by 0x52A72D: commit_list_insert (commit.c:556)
by 0x52A8F2: commit_list_insert_by_date (commit.c:620)
by 0x5270AC: get_merge_bases_many_0 (commit-reach.c:413)
by 0x52716C: repo_get_merge_bases (commit-reach.c:438)
by 0x480E5A: cmd_merge (merge.c:1520)
by 0x40686E: run_builtin (git.c:464)
by 0x406C51: handle_builtin (git.c:716)
by 0x406E96: run_argv (git.c:783)
by 0x40730A: cmd_main (git.c:914)
There are still 3 leaks in chdir_notify_register() after this, but
chdir_notify_register() has been brought up on the list before and folks
were not a fan of fixing those, so I'm not touching them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for merge_incore_recursive(), modelled after
merge_recursive(), notes that
merge_bases will be consumed (emptied) so make a copy if you need it
However, in merge_ort_internal() (which merge_incore_recursive() calls),
it runs
merged_merge_bases = pop_commit(&merge_bases);
...
for (iter = merge_bases; iter; iter = iter->next) {
...
}
In other words, it only consumes the *first* entry of merge_bases, and
the rest it iterates through. If it iterated through all of them, the
caller could be responsible for free'ing the memory. If it consumed all
of them, the current documentation would be correct and the callers
would need to do nothing. The current middle ground makes it impossible
for callers to avoid memory leaks, since any attempt to use the
merge_bases it passes in would result in a use-after-free.
It turns out this part of the code was copied from merge-recursive.c,
which has had the same bug for 15.5 years. However, since we are trying
to keep merge-recursive.c stable as we sunset it, let's just fix the
leak in in merge_ort_internal() by having it actually consume all the
elements of the merge_bases commit_list.
Testing this commit against t6404 (the first testcase specifically
about recursive merges) under valgrind shows that this patch fixes
the following leak:
32 (16 direct, 16 indirect) bytes in 1 blocks are definitely lost \
in loss record 49 of 126
at 0x484086F: malloc (vg_replace_malloc.c:380)
by 0x69FFEB: do_xmalloc (wrapper.c:41)
by 0x6A0073: xmalloc (wrapper.c:62)
by 0x52A72D: commit_list_insert (commit.c:556)
by 0x47EC86: try_merge_strategy (merge.c:751)
by 0x48143B: cmd_merge (merge.c:1679)
by 0x40686E: run_builtin (git.c:464)
by 0x406C51: handle_builtin (git.c:716)
by 0x406E96: run_argv (git.c:783)
by 0x40730A: cmd_main (git.c:914)
by 0x4E7DFA: main (common-main.c:56)
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating the sparse-checkout file, Git does not create the leading
directory, "$GIT_DIR/info", if it does not exist. This causes problems
if the repository does not have that directory. Therefore, ensure that
the leading directory is created.
This is the only "open" in builtin/sparse-checkout.c that does not have
a leading directory check. (The other one in write_patterns_and_update()
does.)
Note that the test needs to explicitly specify a template when running
"git init" because the default template used in the tests has the
"info/" directory included.
Helped-by: Jose Lopes <jabolopes@google.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow the example set by 12909b6b (i18n: turn "options are
incompatible" into "cannot be used together", 2022-01-05) and use
the same message string to reduce the need for translation.
Reported-by: Jiang Xin <worldhello.net@gmail.com>
Helped-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This isn't used per se, but it is useful for debugging, especially
Windows CI failures.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reduces the amount of glue code, because we don't need a void
pointer or vtable within the structure.
The only snag is that reftable_index_record contain a strbuf, so it
cannot be zero-initialized. To address this, use reftable_new_record()
to return fresh instance, given a record type. Since
reftable_new_record() doesn't cause heap allocation anymore, it should
be balanced with reftable_record_release() rather than
reftable_record_destroy().
Thanks to Peff for the suggestion.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was renamed to generic.c, but the origin was never removed
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies unittests a little, and provides further coverage for
reftable_record_copy().
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a more practical ordering when working on refactorings of the
reftable code.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes NULL derefs in error paths. Spotted by Coverity.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This would trigger in the unlikely event that we are compacting, and
the next available file handle is 0.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the cleanup fails, there is nothing we can do.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This would be triggered in the unlikely event of fstat() failing on an
opened file.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test coverage for corrupt zlib data. Fix memory leaks demonstrated by
unittest.
This problem was discovered by a Coverity scan.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that the accepted variants of the --track option are --track,
--track=direct, and --track=inherit. The equal sign in the latter two
cannot be replaced with whitespace; in general optional arguments need
to be attached firmly to their option.
Put "direct" consistently before "inherit", if only for the reasons
that the former is the default, explained first in the documentation,
and comes before the latter alphabetically.
Mention both modes in the short help so that readers don't have to look
them up in the full documentation. They are literal strings and thus
untranslatable. PARSE_OPT_LITERAL_ARGHELP is inferred due to the pipe
and parenthesis characters, so we don't have to provide that flag
explicitly.
Mention that -t has the same effect as --track and --track=direct.
There is no way to specify inherit mode using the short option, because
short options generally don't accept optional arguments.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The trace2 subsystem can inherit certain information from parent
processes via environment variables; e.g., the parent command name and
session ID. This allows trace2 to note when a command is the child
process of another Git process, and to adjust various pieces of output
accordingly.
This behavior breaks certain tests that examine trace2 output when the
tests run as a child of another git process, such as in `git rebase -x
"make test"`.
While we could fix this by unsetting the relevant variables in the
affected tests (currently t0210, t0211, t0212, and t6421), this would
leave other tests vulnerable to similar breakage if new test cases are
added which inspect trace2 output. So fix this in general by unsetting
GIT_TRACE2_PARENT_NAME and GIT_TRACE2_PARENT_SID in test-lib.sh.
Reported-by: Emily Shaffer <emilyshaffer@google.com>
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The German translation for "'%s' is aliased to '%s'" is incorrect. It
switches the order of alias name and alias definition.
A better translation would be "'%s' ist ein Alias für '%s'". (Full stop
removed intentionally, because the original does not use one either.)
Signed-off-by: Matthias Rüster <matthias.ruester@gmail.com>
A recent upstream topic introduced checks for certain Git commands that
prevent them from deleting the current working directory, introducing
also a regression test that ensures that commands such as `git version`
_can_ run without a current working directory.
While technically not possible on Windows via the regular Win32 API, we
do run the regression tests in an MSYS2 Bash which uses a POSIX
emulation layer (the MSYS2/Cygwin runtime) where a really evil hack
_does_ allow to delete a directory even if it is the current working
directory.
Therefore, Git needs to be prepared for a missing working directory,
even on Windows.
This issue was not noticed in upstream Git because there was no caller
that tried to discover a Git directory with a deleted current working
directory in the test suite. But in the microsoft/git fork, we do want
to run `pre-command`/`post-command` hooks for every command, even for
`git version`, which means that we make precisely such a call. The bug
is not in that `pre-command`/`post-command` feature, though, but in
`mingw_getcwd()` and needs to be addressed there.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a run command cannot be executed or found, shells return exit code
126 or 127, respectively. Valid run commands are allowed to return
these codes as well to indicate bad revisions, though, for historical
reasons. This means typos can cause bogus bisect runs that go over the
full distance and end up reporting invalid results.
The best solution would be to reserve exit codes 126 and 127, like
71b0251cdd (Bisect run: "skip" current commit if script exit code is
125., 2007-10-26) did for 125, and abort bisect run when we get them.
That might be inconvenient for those who relied on the documentation
stating that 126 and 127 can be used for bad revisions, though.
The workaround used by this patch is to run the command on a known-good
revision and abort if we still get the same error code. This adds one
step to runs with scripts that use exit codes 126 and 127, but keeps
them supported, with one exception: It won't work with commands that
cannot recognize the (manually marked) known-good revision as such.
Run commands that use low exit codes are unaffected. Typos are reported
after executing the missing command twice and three checkouts (the first
step, the known good revision and back to the revision of the first
step).
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shells report non-executable and missing commands with exit codes 126
and 127, respectively. For historical reasons "git bisect run"
interprets them as indicating a bad commit, though. Document the
current behavior by adding basic tests that cover these cases.
Reported-by: Ramkumar Ramachandra <r@artagnon.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the cleanup code out of the loop and make sure all execution paths
pass through it to avoid leaking memory.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strvec "args" in bisect_run() is initialized and cleared, but never
added to. Nevertheless its first member is printed when reporting a
bisect_state() error. That's not useful, since it's always NULL.
Before d1bbbe45df (bisect--helper: reimplement `bisect_run` shell
function in C, 2021-09-13) the intended new state was reported if it
could not be set. Reinstate that behavior and remove the unused strvec.
Reported-by: Ramkumar Ramachandra <r@artagnon.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git fetch --negotiate-only` is an implementation detail of push
negotiation and, unlike most `git fetch` invocations, does not actually
update the main repository. Thus it should not update submodules even
if submodule recursion is enabled.
This is not just slow, it is wrong e.g. push negotiation with
"submodule.recurse=true" will cause submodules to be updated because it
invokes `git fetch --negotiate-only`.
Fix this by disabling submodule recursion if --negotiate-only was given.
Since this makes --negotiate-only and --recurse-submodules incompatible,
check for this invalid combination and die.
This does not use the "goto cleanup" introduced in the previous commit
because we want to recurse through submodules whenever a ref is fetched,
and this can happen without introducing new objects.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_fetch() does the following with the assumption that objects are
fetched:
* Run gc
* Write commit graphs (if enabled by fetch.writeCommitGraph=true)
However, neither of these tasks makes sense if objects are not fetched
e.g. `git fetch --negotiate-only` never fetches objects.
Speed up cmd_fetch() by bailing out early if we know for certain that
objects will not be fetched. cmd_fetch() can bail out early whenever
objects are not fetched, but for now this only considers
--negotiate-only.
The same optimization does not apply to `git fetch --dry-run` because
that actually fetches objects; the dry run refers to not updating refs.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace an early return with 'goto cleanup' in cmd_fetch() so that the
string_list is always cleared (the string_list_clear() call is purely
cleanup; the string_list is not reused). This makes cleanup consistent
so that a subsequent commit can use 'goto cleanup' to bail out early.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -h" incorrectly said "--track[=direct|inherit]",
implying that "--trackinherit" is a valid option, which has been
corrected.
* js/branch-track-inherit:
branch,checkout: fix --track usage strings
FreeBSD 13.0 headers have unconditional dependency on C11 language
features, and adding -std=gnu99 to DEVELOPER_CFLAGS would just
break the developer build.
* jc/freebsd-without-c99-only-build:
Makefile: FreeBSD cannot do C99-or-below build
As Ævar pointed out in [1], the use of PARSE_OPT_LITERAL_ARGHELP with a
list of allowed parameters is not recommended. Both git-branch and
git-checkout were changed in d311566 (branch: add flags and config to
inherit tracking, 2021-12-20) to use this discouraged combination for
their --track flags.
Fix this by removing PARSE_OPT_LITERAL_ARGHELP, and changing the arghelp
to simply be "mode". Users may discover allowed values in the manual
pages.
[1]: https://lore.kernel.org/git/220111.86a6g3yqf9.gmgdl@evledraar.gmail.com/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a feature that supports config file inclusion conditional on
whether the repo has a remote with a URL that matches a glob.
Similar to my previous work on remote-suggested hooks [1], the main
motivation is to allow remote repo administrators to provide recommended
configs in a way that can be consumed more easily (e.g. through a
package installable by a package manager - it could, for example,
contain a file to be included conditionally and a post-install script
that adds the include directive to the system-wide config file).
In order to do this, Git reruns the config parsing mechanism upon
noticing the first URL-conditional include in order to find all remote
URLs, and these remote URLs are then used to determine if that first and
all subsequent includes are executed. Remote URLs are not allowed to be
configued in any URL-conditionally-included file.
[1] https://lore.kernel.org/git/cover.1623881977.git.jonathantanmy@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In "make DEVELOPER=YesPlease" builds, we try to help developers to
catch as many potential issues as they can by using -Wall and
turning compilation warnings into errors. In the same spirit, we
recently started adding -std=gnu99 to their CFLAGS, so that they can
notice when they accidentally used language features beyond C99.
It however turns out that FreeBSD 13.0 mistakenly uses C11 extension
in its system header files regardless of what __STDC_VERSION__ says,
which means that the platform (unless we tweak their system headers)
cannot be used for this purpose.
It seems that -std=gnu99 is only added conditionally even in today's
config.mak.dev, so it is fine if we dropped -std=gnu99 from there.
Which means that developers on FreeBSD cannot participate in vetting
use of features beyond C99, but there are developers on other
platforms who will, so it's not too bad.
We might want a more "fundamental" fix to make the platform capable
of taking -std=gnu99, like working around the use of unconditional
C11 extension in its system header files by supplying a set of
"replacement" definitions in our header files. We chose not to
pursue such an approach for two reasons at this point:
(1) The fix belongs to the FreeBSD project, not this project, and
such an upstream fix may happen hopefully in a not-too-distant
future.
(2) Fixing such a bug in system header files and working it around
can lead to unexpected breakages (other parts of their system
header files may not be expecting to see and do not work well
with our "replacement" definitions). This close to the final
release of this cycle, we have no time for that.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust build on RHEL 7 to explicitly ask C99 support and use
the fallback implementation of uncompress2 we ship.
* da/rhel7-lacks-uncompress2-and-c99:
build: centos/RHEL 7 ships with an older gcc and zlib
In commit 8b09a900a1 ("merge-ort: restart merge with cached renames to
reduce process entry cost", 2021-07-16), we noted that in the merge-ort
steps of
collect_merge_info()
detect_and_process_renames()
process_entries()
that process_entries() was expensive, and we could often make it cheaper
by changing this to
collect_merge_info()
detect_and_process_renames()
<cache all the renames, and restart>
collect_merge_info()
detect_and_process_renames()
process_entries()
because the second collect_merge_info() would be cheaper (we could avoid
traversing into some directories), the second
detect_and_process_renames() would be free since we had already detected
all renames, and then process_entries() has far fewer entries to handle.
However, this was built on the assumption that the first
detect_and_process_renames() actually detected all potential renames.
If someone has merge.renameLimit set to some small value, that
assumption is violated which manifests later with the following message:
$ git -c merge.renameLimit=1 rebase upstream
...
git: merge-ort.c:546: clear_or_reinit_internal_opts: Assertion
`renames->cached_pairs_valid_side == 0' failed.
Turn off this cache-renames-and-restart whenever we cannot detect all
renames, and add a testcase that would have caught this problem.
Reported-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Tested-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current way we generate random file names is by taking the seconds
and microseconds, plus the PID, and mixing them together, then encoding
them. If this fails, we increment the value by 7777, and try again up
to TMP_MAX times.
Unfortunately, this is not the best idea from a security perspective.
If we're writing into TMPDIR, an attacker can guess these values easily
and prevent us from creating any temporary files at all by creating them
all first. Even though we set TMP_MAX to 16384, this may be achievable
in some contexts, even if unlikely to occur in practice.
Fortunately, we can simply solve this by using the system
cryptographically secure pseudorandom number generator (CSPRNG) to
generate a random 64-bit value, and use that as before. Note that there
is still a small bias here, but because a six-character sequence chosen
out of 62 characters provides about 36 bits of entropy, the bias here is
less than 2^-28, which is acceptable, especially considering we'll retry
several times.
Note that the use of a CSPRNG in generating temporary file names is also
used in many libcs. glibc recently changed from an approach similar to
ours to using a CSPRNG, and FreeBSD and OpenBSD also use a CSPRNG in
this case. Even if the likelihood of an attack is low, we should still
be at least as responsible in creating temporary files as libc is.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many situations in which having access to a cryptographically
secure pseudorandom number generator (CSPRNG) is helpful. In the
future, we'll encounter one of these when dealing with temporary files.
To make this possible, let's add a function which reads from a system
CSPRNG and returns some bytes.
We know that all systems will have such an interface. A CSPRNG is
required for a secure TLS or SSH implementation and a Git implementation
which provided neither would be of little practical use. In addition,
POSIX is set to standardize getentropy(2) in the next version, so in the
(potentially distant) future we can rely on that.
For systems which lack one of the other interfaces, we provide the
ability to use OpenSSL's CSPRNG. OpenSSL is highly portable and
functions on practically every known OS, and we know it will have access
to some source of cryptographically secure randomness. We also provide
support for the arc4random in libbsd for folks who would prefer to use
that.
Because this is a security sensitive interface, we take some
precautions. We either succeed by filling the buffer completely as we
requested, or we fail. We don't return partial data because the caller
will almost never find that to be a useful behavior.
Specify a makefile knob which users can use to specify one or more
suitable CSPRNGs, and turn the multiple string options into a set of
defines, since we cannot match on strings in the preprocessor. We allow
multiple options to make the job of handling this in autoconf easier.
The order of options is important here. On systems with arc4random,
which is most of the BSDs, we use that, since, except on MirBSD and
macOS, it uses ChaCha20, which is extremely fast, and sits entirely in
userspace, avoiding a system call. We then prefer getrandom over
getentropy, because the former has been available longer on Linux, and
then OpenSSL. Finally, if none of those are available, we use
/dev/urandom, because most Unix-like operating systems provide that API.
We prefer options that don't involve device files when possible because
those work in some restricted environments where device files may not be
available.
Set the configuration variables appropriately for Linux and the BSDs,
including macOS, as well as Windows and NonStop. We specifically only
consider versions which receive publicly available security support
here. For the same reason, we don't specify getrandom(2) on Linux,
because CentOS 7 doesn't support it in glibc (although its kernel does)
and we don't want to resort to making syscalls.
Finally, add a test helper to allow this to be tested by hand and in
tests. We don't add any tests, since invoking the CSPRNG is not likely
to produce interesting, reproducible results.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are some commands permit the user whether to provide options
first before args, or the reverse order. For example:
git push --dry-run <remote> <ref>
And:
git push <remote> <ref> --dry-run
Both of them is supported, but some commands do not, for instance:
git ls-remote --heads <remote>
And:
git ls-remote <remote> --heads
If <remote> only has one ref and it's name is "refs/heads/--heads", you
will get the same result, otherwise will not.This is because the former
in the second example will parse "--heads" as an "option" which means
to limit to only "refs/heads" when listing the remote references, the
latter treat "--heads" as an argument which means to filter the result
list with the given pattern.
Therefore, we want to specify a bit more in "gitcli.txt" about the way
we recommend and help to resolve the ambiguity around some git command
usage. The related disscussions locate at [1].
By the way, there are some issues with lowercase letters in the document,
which have been modified together.
[1] https://public-inbox.org/git/cover.1642129840.git.dyroneteng@gmail.com/
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When deleting refs from the loose-files refs backend, then we need to be
careful to also delete the same ref from the packed refs backend, if it
exists. If we don't, then deleting the loose ref would "uncover" the
packed ref. We thus always have to queue up deletions of refs for both
the loose and the packed refs backend. This is done in two separate
transactions, where the end result is that the reference-transaction
hook is executed twice for the deleted refs.
This behaviour is quite misleading: it's exposing implementation details
of how the files backend works to the user, in contrast to the logical
updates that we'd really want to expose via the hook. Worse yet, whether
the hook gets executed once or twice depends on how well-packed the
repository is: if the ref only exists as a loose ref, then we execute it
once, otherwise if it is also packed then we execute it twice.
Fix this behaviour and don't execute the reference-transaction hook at
all when refs in the packed-refs backend if it's driven by the files
backend. This works as expected even in case the refs to be deleted only
exist in the packed-refs backend because the loose-backend always queues
refs in its own transaction even if they don't exist such that they can
be locked for concurrent creation. And it also does the right thing in
case neither of the backends has the ref because that would cause the
transaction to fail completely.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reference-transaction hook is supposed to track logical changes to
references, but it currently also gets executed when packing refs in a
repository. This is unexpected and ultimately not all that useful:
packing refs is not supposed to result in any user-visible change to the
refs' state, and it ultimately is an implementation detail of how refs
stores work.
Fix this excessive execution of the hook when packing refs.
Reported-by: Waleed Khan <me@waleedkhan.name>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests which demonstate that we're executing the
reference-transaction hook too often in some cases, which thus leaks
implementation details about the reference store's implementation
itself. Behaviour will be fixed in follow-up commits.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reference-transaction hook is executing whenever we prepare, commit
or abort a reference transaction. While this is mostly intentional, in
case of the files backend we're leaking the implementation detail that
the store is in fact a composite store with one loose and one packed
backend to the caller. So while we want to execute the hook for all
logical updates, executing it for such implementation details is
unexpected.
Prepare for a fix by adding a new flag which allows to skip execution of
the hook.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not currently have any flags when creating reference transactions,
but we'll add one to disable execution of the reference transaction hook
in some cases.
Allow passing flags to `ref_store_transaction_begin()` to prepare for
this change.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When deleting loose refs, then we also have to delete the refs in the
packed backend. This is done by calling `refs_delete_refs()`, which
then uses the packed-backend's logic to delete refs. This doesn't allow
us to exercise any control over the reference transaction which is being
created in the packed backend, which is required in a subsequent commit.
Extract a new function `packed_refs_delete_refs()`, which hosts most of
the logic to delete refs except for creating the transaction itself.
Like this, we can easily create the transaction in the files backend
and thus exert more control over it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git 2.35 l10n round 1, a space between two words was missing in the
message from "branch.c", and it was fixed by commit 68d924e1de (branch:
missing space fix at line 313, 2022-01-11).
Do a batch update for teams (bg, fr, id, sv, tr and zh_CN) that have
already completed their works on l10n round 1.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Git 2.35-rc1
* tag 'v2.35.0-rc1':
Git 2.35-rc1
reftable tests: avoid "int" overflow, use "uint64_t"
reftable: avoid initializing structs from structs
t1450-fsck: exec-bit is not needed to make loose object writable
refs API: use "failure_errno", not "errno"
Last minute fixes before -rc1
build: NonStop ships with an older zlib
packfile: fix off-by-one error in decoding logic
t/gpg: simplify test for unknown key
branch: missing space fix at line 313
fmt-merge-msg: prevent use-after-free with signed tags
cache.h: drop duplicate `ensure_full_index()` declaration
lazyload: use correct calling conventions
fetch: fix deadlock when cleaning up lockfiles in async signals
GCC 4.8.5 is the default system compiler on centos7/RHEL7.
This version requires -std=c99 to enable c99 support.
zlib 1.2.7 on centos7/rhel7 lacks uncompress2().
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few portability tweaks.
* ab/reftable-build-fixes:
reftable tests: avoid "int" overflow, use "uint64_t"
reftable: avoid initializing structs from structs
Trying to clear the skip-worktree bit from files that are present does
present some computational overhead, for sparse-checkouts. (We do not
do the bit clearing in non-sparse-checkouts.) Optimize it as follows:
Rather than lstat()'ing every SKIP_WORKTREE path, take advantage of the
fact that entire directories will often be missing, especially for cone
mode and even more so ever since commit 55dfcf9591 ("sparse-checkout:
clear tracked sparse dirs", 2021-09-08). If we have already determined
that the parent directory of a file (or other previous ancestor) does
not exist, then the file cannot exist either so we do not need to
lstat() it separately.
Timings for p2000 included below, reformatted to fit in normal commit
message line lengths, which compare three things:
* Timings before this series
* Timings of the unoptimized version of
clear_skip_worktree_from_present_files() from a few commits ago
* Timings after the optimization in this commit
(NOTE: t/perf/ appears to have timing resolution only down to 0.01 s,
which presents significant measurement error when timings only differ by
0.01s. I don't trust any such timings below, and yet all the optimized
results differ by at most 0.01s.)
Test Before Series Unoptimized Optimized
-----------------------------------------------------------------------------
*git status*
full-v3 0.15(0.10+0.06) 0.32(0.16+0.17) +113.3% 0.16(0.10+0.07) +6.7%
full-v4 0.15(0.11+0.05) 0.32(0.17+0.16) +113.3% 0.16(0.11+0.05) +6.7%
sparse-v3 0.04(0.03+0.04) 0.04(0.02+0.05) +0.0% 0.04(0.02+0.05) +0.0%
sparse-v4 0.04(0.03+0.04) 0.04(0.02+0.05) +0.0% 0.04(0.03+0.05) +0.0%
*git add -A*
full-v3 0.40(0.30+0.07) 0.56(0.36+0.17) +40.0% 0.39(0.30+0.07) -2.5%
full-v4 0.37(0.28+0.07) 0.54(0.37+0.16) +45.9% 0.38(0.29+0.07) +2.7%
sparse-v3 0.06(0.04+0.05) 0.08(0.05+0.05) +33.3% 0.06(0.05+0.04) +0.0%
sparse-v4 0.05(0.03+0.05) 0.05(0.04+0.04) +0.0% 0.06(0.04+0.05) +20.0%
*git add .*
full-v3 0.40(0.31+0.07) 0.57(0.37+0.17) +42.5% 0.41(0.30+0.08) +2.5%
full-v4 0.38(0.30+0.06) 0.55(0.37+0.16) +44.7% 0.38(0.30+0.06) +0.0%
sparse-v3 0.06(0.04+0.05) 0.06(0.05+0.04) +0.0% 0.06(0.03+0.05) +0.0%
sparse-v4 0.06(0.05+0.05) 0.06(0.04+0.05) +0.0% 0.06(0.04+0.06) +0.0%
*git commit -a -m A*
full-v3 0.41(0.32+0.06) 0.58(0.39+0.17) +41.5% 0.42(0.32+0.07) +2.4%
full-v4 0.39(0.30+0.07) 0.56(0.38+0.17) +43.6% 0.40(0.31+0.07) +2.6%
sparse-v3 0.04(0.03+0.04) 0.04(0.03+0.04) +0.0% 0.04(0.03+0.04) +0.0%
sparse-v4 0.04(0.03+0.05) 0.04(0.03+0.05) +0.0% 0.04(0.03+0.04) +0.0%
*git checkout -f -*
full-v3 0.56(0.46+0.07) 0.73(0.55+0.16) +30.4% 0.57(0.47+0.08) +1.8%
full-v4 0.54(0.45+0.07) 0.71(0.53+0.17) +31.5% 0.55(0.45+0.07) +1.9%
sparse-v3 0.06(0.04+0.04) 0.06(0.04+0.05) +0.0% 0.06(0.04+0.05) +0.0%
sparse-v4 0.05(0.05+0.04) 0.05(0.04+0.05) +0.0% 0.06(0.04+0.05) +20.0%
*git reset*
full-v3 0.34(0.26+0.05) 0.51(0.34+0.15) +50.0% 0.34(0.26+0.06) +0.0%
full-v4 0.32(0.24+0.06) 0.49(0.32+0.15) +53.1% 0.33(0.25+0.06) +3.1%
sparse-v3 0.04(0.03+0.04) 0.04(0.03+0.04) +0.0% 0.04(0.03+0.04) +0.0%
sparse-v4 0.03(0.03+0.04) 0.03(0.02+0.04) +0.0% 0.03(0.03+0.04) +0.0%
*git reset --hard*
full-v3 0.57(0.46+0.07) 0.90(0.61+0.25) +57.9% 0.57(0.45+0.08) +0.0%
full-v4 0.54(0.46+0.05) 0.88(0.59+0.26) +63.0% 0.55(0.45+0.07) +1.9%
sparse-v3 0.07(0.03+0.03) 0.07(0.04+0.03) +0.0% 0.07(0.03+0.03) +0.0%
sparse-v4 0.06(0.03+0.03) 0.06(0.04+0.02) +0.0% 0.06(0.03+0.03) +0.0%
*git reset -- does-not-exist*
full-v3 0.35(0.27+0.06) 0.52(0.32+0.17) +48.6% 0.35(0.27+0.06) +0.0%
full-v4 0.33(0.26+0.05) 0.50(0.33+0.15) +51.5% 0.33(0.26+0.06) +0.0%
sparse-v3 0.04(0.03+0.04) 0.04(0.03+0.04) +0.0% 0.04(0.03+0.04) +0.0%
sparse-v4 0.04(0.02+0.04) 0.03(0.02+0.04) -25.0% 0.03(0.02+0.04) -25.0%
*git diff*
full-v3 0.07(0.04+0.04) 0.24(0.11+0.14) +242.9% 0.07(0.04+0.04) +0.0%
full-v4 0.07(0.03+0.05) 0.24(0.13+0.12) +242.9% 0.08(0.04+0.05) +14.3%
sparse-v3 0.02(0.01+0.04) 0.02(0.01+0.04) +0.0% 0.02(0.01+0.05) +0.0%
sparse-v4 0.02(0.02+0.03) 0.02(0.01+0.04) +0.0% 0.02(0.01+0.04) +0.0%
*git diff --cached*
full-v3 0.05(0.03+0.02) 0.22(0.12+0.09) +340.0% 0.05(0.03+0.01) +0.0%
full-v4 0.05(0.03+0.01) 0.23(0.12+0.11) +360.0% 0.05(0.03+0.02) +0.0%
sparse-v3 0.01(0.00+0.00) 0.01(0.00+0.00) +0.0% 0.01(0.00+0.00) +0.0%
sparse-v4 0.01(0.00+0.00) 0.01(0.00+0.00) +0.0% 0.01(0.00+0.00) +0.0%
*git blame f2/f4/a*
full-v3 0.18(0.13+0.05) 0.52(0.29+0.23) +188.9% 0.19(0.15+0.04) +5.6%
full-v4 0.19(0.15+0.04) 0.52(0.28+0.23) +173.7% 0.19(0.14+0.04) +0.0%
sparse-v3 0.10(0.08+0.02) 0.10(0.09+0.01) +0.0% 0.10(0.09+0.01) +0.0%
sparse-v4 0.10(0.08+0.02) 0.10(0.08+0.02) +0.0% 0.10(0.08+0.02) +0.0%
*git blame f2/f4/f3/a*
full-v3 0.45(0.36+0.08) 0.78(0.51+0.27) +73.3% 0.45(0.37+0.08) +0.0%
full-v4 0.45(0.37+0.08) 0.78(0.51+0.26) +73.3% 0.45(0.37+0.08) +0.0%
sparse-v3 0.36(0.32+0.04) 0.36(0.31+0.05) +0.0% 0.36(0.31+0.04) +0.0%
sparse-v4 0.36(0.31+0.05) 0.36(0.31+0.05) +0.0% 0.36(0.31+0.04) +0.0%
*git checkout-index -f --all*
full-v3 0.07(0.02+0.05) 0.24(0.12+0.12) +242.9% 0.08(0.04+0.04) +14.3%
full-v4 0.07(0.03+0.04) 0.24(0.11+0.13) +242.9% 0.08(0.03+0.04) +14.3%
sparse-v3 0.04(0.01+0.03) 0.04(0.00+0.03) +0.0% 0.04(0.01+0.03) +0.0%
sparse-v4 0.04(0.01+0.02) 0.04(0.01+0.03) +0.0% 0.04(0.01+0.02) +0.0%
*git update-index --add --remove f2/f4/a*
full-v3 0.29(0.23+0.02) 0.46(0.30+0.12) +58.6% 0.30(0.24+0.02) +3.4%
full-v4 0.27(0.22+0.02) 0.45(0.29+0.12) +66.7% 0.28(0.22+0.03) +3.7%
sparse-v3 0.02(0.02+0.00) 0.02(0.01+0.00) +0.0% 0.02(0.01+0.00) +0.0%
sparse-v4 0.02(0.02+0.00) 0.02(0.02+0.00) +0.0% 0.02(0.02+0.00) +0.0%
So, with the optimization, the extra work appears to be essentially 0
for sparse-checkouts that are also using sparse-indexes (even before my
optimization), and the extra work appears to be just marginally more
than 0 for sparse-checkouts that are using full indexes.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make several small updates, to address a few documentation issues
I spotted:
* sparse-checkout focused on "patterns" even though the inputs (and
outputs in the case of `list`) are directories in cone-mode
* The description section of the sparse-checkout documentation
was a bit sparse (no pun intended), and focused more on internal
mechanics rather than end user usage. This made sense in the
early days when the command was even more experimental, but let's
adjust a bit to try to make it more approachable to end users who
may want to consider using it. Keep the scary backward
compatibility warning, though; we're still hard at work trying to
fix up commands to behave reasonably in sparse checkouts.
* both read-tree and update-index tried to describe how to use the
skip-worktree bit, but both predated the sparse-checkout command.
The sparse-checkout command is a far easier mechanism to use and
for users trying to reduce the size of their working tree, we
should recommend users to look at it instead.
* The update-index documentation pointed out that assume-unchanged
and skip-worktree sounded similar but had different purposes.
However, it made no attempt to explain the differences, only to
point out that they were different. Explain the differences.
* The update-index documentation focused much more on (internal?)
implementation details than on end-user usage. Try to explain
its purpose better for users of update-index, rather than
fellow developers trying to work with the SKIP_WORKTREE bit.
* Clarify that when core.sparseCheckout=true, we treat a file's
presence in the working tree as being an override to the
SKIP_WORKTREE bit (i.e. in sparse checkouts when the file is
present we ignore the SKIP_WORKTREE bit).
Note that this commit, like many touching documentation, is best viewed
with the `--color-words` option to diff/log.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fix is short (~30 lines), but the description is not. Sorry.
There is a set of problems caused by files in what I'll refer to as the
"present-despite-SKIP_WORKTREE" state. This commit aims to not just fix
these problems, but remove the entire class as a possibility -- for
those using sparse checkouts. But first, we need to understand the
problems this class presents. A quick outline:
* Problems
* User facing issues
* Problem space complexity
* Maintenance and code correctness challenges
* SKIP_WORKTREE expectations in Git
* Suggested solution
* Pros/Cons of suggested solution
* Notes on testcase modifications
=== User facing issues ===
There are various ways for users to get files to be present in the
working copy despite having the SKIP_WORKTREE bit set for that file in
the index. This may come from:
* various git commands not really supporting the SKIP_WORKTREE bit[1,2]
* users grabbing files from elsewhere and writing them to the worktree
(perhaps even cached in their editor)
* users attempting to "abort" a sparse-checkout operation with a
not-so-early Ctrl+C (updating $GIT_DIR/info/sparse-checkout and the
working tree is not atomic)[3].
Once users have present-despite-SKIP_WORKTREE files, any modifications
users make to these files will be ignored, possibly to users' confusion.
Further:
* these files will degrade performance for the sparse-index case due
to requiring the index to be expanded (see commit 55dfcf9591
("sparse-checkout: clear tracked sparse dirs", 2021-09-08) for why
we try to delete entire directories outside the sparse cone).
* these files will not be updated by by standard commands
(switch/checkout/pull/merge/rebase will leave them alone unless
conflicts happen -- and even then, the conflicted file may be
written somewhere else to avoid overwriting the SKIP_WORKTREE file
that is present and in the way)
* there is nothing in Git that users can use to discover such
files (status, diff, grep, etc. all ignore it)
* there is no reasonable mechanism to "recover" from such a condition
(neither `git sparse-checkout reapply` nor `git reset --hard` will
correct it).
So, not only are users modifications ignored, but the files get
progressively more stale over time. At some point in the future, they
may change their sparseness specification or disable sparse-checkouts.
At that time, all present-despite-SKIP_WORKTREE files will show up as
having lots of modifications because they represent a version from a
different branch or commit. These might include user-made local changes
from days before, but the only way to tell is to have users look through
them all closely.
If these users come to others for help, there will be no logs that
explain the issue; it's just a mysterious list of changes. Users might
adamantly claim (correctly, as it turns out) that they didn't modify
these files, while others presume they did.
[1] https://lore.kernel.org/git/xmqqbmb1a7ga.fsf@gitster-ct.c.googlers.com/
[2] https://lore.kernel.org/git/CABPp-BH9tju7WVm=QZDOvaMDdZbpNXrVWQdN-jmfN8wC6YVhmw@mail.gmail.com/
[3] https://lore.kernel.org/git/CABPp-BFnFpzwGC11TLoLs8YK5yiisA5D5-fFjXnJsbESVDwZsA@mail.gmail.com/
=== Problem space complexity ===
SKIP_WORKTREE has been part of Git for over a decade. Duy did lots of
work on it initially, and several others have since come along and put
lots of work into it. Stolee spent most of 2021 on the sparse-index,
with lots of bugfixes along the way including to non-sparse-index cases
as we are still trying to get sparse checkouts to behave reasonably.
Basically every codepath throughout the treat needs to be aware of an
additional type of file: tracked-but-not-present. The extra type
results in lots of extra testcases and lots of extra code everywhere.
But, the sad thing is that we actually have more than one extra type.
We have tracked, tracked-but-not-present (SKIP_WORKTREE), and
tracked-but-promised-to-not-be-present-but-is-present-anyway
(present-despite-SKIP_WORKTREE). Two types is a monumental amount of
effort to support, and adding a third feels a bit like insanity[4].
[4] Some examples of which can be seen at
https://lore.kernel.org/git/CABPp-BGJ_Nvi5TmgriD9Bh6eNXE2EDq2f8e8QKXAeYG3BxZafA@mail.gmail.com/
=== Maintenance and code correctness challenges ===
Matheus' patches to grep stalled for nearly a year, in part because of
complications of how to handle sparse-checkouts appropriately in all
cases[5][6] (with trying to sanely figure out how to sanely handle
present-despite-SKIP_WORKTREE files being one of the complications).
His rm/add follow-ups also took months because of those kinds of
issues[7]. The corner cases with things like submodules and
SKIP_WORKTREE with the addition of present-despite-SKIP_WORKTREE start
becoming really complex[8].
We've had to add ugly logic to merge-ort to attempt to handle
present-despite-SKIP_WORKTREE files[9], and basically just been forced
to give up in merge-recursive knowing full well that we'll sometimes
silently discard user modifications. Despite stash essentially being a
merge, it needed extra code (beyond what was in merge-ort and
merge-recursive) to manually tweak SKIP_WORKTREE bits in order to avoid
a few different bugs that'd result in an early abort with a partial
stash application[10].
[5] See https://lore.kernel.org/git/5f3f7ac77039d41d1692ceae4b0c5df3bb45b74a.1612901326.git.matheus.bernardino@usp.br/#t
and the dates on the thread; also Matheus and I had several
conversations off-list trying to resolve the issues over that time
[6] ...it finally kind of got unstuck after
https://lore.kernel.org/git/CABPp-BGJ_Nvi5TmgriD9Bh6eNXE2EDq2f8e8QKXAeYG3BxZafA@mail.gmail.com/
[7] See for example
https://lore.kernel.org/git/CABPp-BHwNoVnooqDFPAsZxBT9aR5Dwk5D9sDRCvYSb8akxAJgA@mail.gmail.com/#t
and quotes like "The core functionality of sparse-checkout has always
been only partially implemented", a statement I still believe is true
today.
[8] https://lore.kernel.org/git/pull.809.git.git.1592356884310.gitgitgadget@gmail.com/
[9] See commit 66b209b86a ("merge-ort: implement CE_SKIP_WORKTREE
handling with conflicted entries", 2021-03-20)
[10] See commit ba359fd507 ("stash: fix stash application in
sparse-checkouts", 2020-12-01)
=== SKIP_WORKTREE expectations in Git ===
A couple quotes:
* From [11] (before the "sparse-checkout" command existed):
If it needs too many special cases, hacks, and conditionals, then it
is not worth the complexity---if it is easier to write a correct code
by allowing Git to populate working tree files, it is perfectly fine
to do so.
In a sense, the sparse checkout "feature" itself is a hack by itself,
and that is why I think this part should be "best effort" as well.
* From the git-sparse-checkout manual (still present today):
THIS COMMAND IS EXPERIMENTAL. ITS BEHAVIOR, AND THE BEHAVIOR OF OTHER
COMMANDS IN THE PRESENCE OF SPARSE-CHECKOUTS, WILL LIKELY CHANGE IN
THE FUTURE.
[11] https://lore.kernel.org/git/xmqqbmb1a7ga.fsf@gitster-ct.c.googlers.com/
=== Suggested solution ===
SKIP_WORKTREE was written to allow sparse-checkouts, in particular, as
the name of the option implies, to allow the file to NOT be in the
worktree but consider it to be unchanged rather than deleted.
The suggests a simple solution: present-despite-SKIP_WORKTREE files
should not exist, for those using sparse-checkouts.
Enforce this at index loading time by checking if core.sparseCheckout is
true; if so, check files in the index with the SKIP_WORKTREE bit set to
verify that they are absent from the working tree. If they are present,
unset the bit (in memory, though any commands that write to the index
will record the update).
Users can, of course, can get the SKIP_WORKTREE bit back such as by
running `git sparse-checkout reapply` (if they have ensured the file is
unmodified and doesn't match the specified sparsity patterns).
=== Pros/Cons of suggested solution ===
Pros:
* Solves the user visible problems reported above, which I've been
complaining about for nearly a year but couldn't find a solution to.
* Helps prevent slow performance degradation with a sparse-index.
* Much easier behavior in sparse-checkouts for users to reason about
* Very simple, ~30 lines of code.
* Significantly simplifies some ugly testcases, and obviates the need
to test an entire class of potential issues.
* Reduces code complexity, reasoning, and maintenance. Avoids
disagreements about weird corner cases[12].
* It has been reported that some users might be (ab)using
SKIP_WORKTREE as a let-me-modify-but-keep-the-file-in-the-worktree
mechanism[13, and a few other similar references]. These users know
of multiple caveats and shortcomings in doing so; perhaps not
surprising given the "SKIP_WORKTREE expecations" section above.
However, these users use `git update-index --skip-worktree`, and not
`git sparse-checkout` or core.sparseCheckout=true. As such, these
users would be unaffected by this change and can continue abusing
the system as before.
[12] https://lore.kernel.org/git/CABPp-BH9tju7WVm=QZDOvaMDdZbpNXrVWQdN-jmfN8wC6YVhmw@mail.gmail.com/
[13] https://stackoverflow.com/questions/13630849/git-difference-between-assume-unchanged-and-skip-worktree
Cons:
* When core.sparseCheckout is enabled, this adds a performance cost to
reading the index. I'll defer discussion of this cost to a subsequent
patch, since I have some optimizations to add.
=== Notes on testcase modifications ===
The good:
* t1011: Compare to two cases above it ('read-tree will not throw away
dirty changes, non-sparse'); since the file is present, it should
match the non-sparse case now
* t1092: sparse-index & sparse-checkout now match full-worktree
behavior in more cases! Yaay for consistency!
* t6428, t7012: look at how much simpler the tests become! Merge and
stash can just fail early telling the user there's a file in the
way, instead of not noticing until it's about to write a file and
then have to implement sudden crash avoidance. Hurray for sanity!
* t7817: sparse behavior better matches full tree behavior. Hurray
for sanity!
The confusing:
* t3705: These changes were ONLY needed on Windows, but they don't
hurt other platforms. Let's discuss each individually:
* core.sparseCheckout should be false by default. Nothing in this
testcase toggles that until many, many tests later. However,
early tests (#5 in particular) were testing `update-index
--skip-worktree` behavior in a non-sparse-checkout, but the
Windows tests in CI were behaving as if core.sparseCheckout=true
had been specified somewhere. I do not have access to a Windows
machine. But I just manually did what should have been a no-op
and turned the config off. And it fixed the test.
* I have no idea why the leftover .gitattributes file from this
test was causing failures for test #18 on Windows, but only with
these changes of mine. Test #18 was checking for empty stderr,
and specifically wanted to know that some error completely
unrelated to file endings did not appear. The leftover
.gitattributes file thus caused some spurious stderr unrelated to
the thing being checked. Since other tests did not intend to
test normalization, just proactively remove the .gitattributes
file. I'm certain this is cleaner and better, I'm just unsure
why/how this didn't trigger problems before.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For sparse-checkouts, we don't want unpack-trees to error out on files
that are missing from the worktree, so there has traditionally been
logic to make it skip the verify_uptodate() check for these.
Unfortunately, it was skipping the verify_uptodate() check for files
that were expected to *become* SKIP_WORKTREE. For files that were not
already SKIP_WORKTREE, that can cause us to later delete the file in
apply_sparse_checkout(). Only skip the check for files that were
already SKIP_WORKTREE as well to avoid lightly discarding important
changes users may have made to files.
Note 1: unpack-trees.c is already a bit complex, and the logic around
CE_SKIP_WORKTREE and CE_NEW_SKIP_WORKTREE in that file are no exception.
I also tried just replacing CE_NEW_SKIP_WORKTREE with CE_SKIP_WORKTREE
in the verify_uptodate() check instead of checking for both flags, and
found that it also fixed this bug and passed all the tests. I also
attempted to devise a few testcases that might trip either variant of my
fix and was unable to find any problems. It may be that just checking
CE_SKIP_WORKTREE is a better fix, but I'm not sure. I thought it
was a bit safer to strictly reduce the number of cases where we skip the
up-to-date check rather than just toggling which kind of cases skip it,
and thus went with the current variant of the fix.
Note 2: I also wondered if verify_absent() might have a similar bug, but
despite my attempts to try to devise a testcase that would trigger such
a thing, I couldn't find any problematic testcases. Thus, this patch
makes no attempt to apply similar changes to verify_absent() and
verify_absent_if_directory().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a user has a file with local modifications that is not marked as
SKIP_WORKTREE, but the sparsity patterns are such that it should be
marked that way, and the user then invokes a command like
* git checkout -q HEAD^
or
* git read-tree -mu HEAD^
Then the file will be deleted along with all the users' modifications.
Add a testcase demonstrating this problem.
Note: This bug only triggers if something other than 'HEAD' is given;
if the commands above had specified 'HEAD', then the users' file would
be left alone.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"pull --rebase" internally uses the merge machinery when the other
history is a descendant of ours (i.e. perform fast-forward). This
came from [1], where the discussion was started from a feature
request to do so. It is a bit hard to read the rationale behind it
in the discussion, but it seems that it was an established fact for
everybody involved that does not even need to be mentioned that
fast-forwarding done with "rebase" was much undesirable than done
with "merge", and more importantly, the result left by "merge" is as
good as (or better than) that by "rebase".
Except for one thing. Because "git merge" does not (and should not)
honor rebase.autostash, "git pull" needs to read it and forward it
when we use "git merge" as a (hopefully better) substitute for "git
rebase" during the fast-forwarding. But we forgot to do so (we only
add "--[no-]autostash" to the "git merge" command when "git pull" itself
was invoked with "--[no-]autostash" command line option.
Make sure "git merge" is run with "--autostash" when
rebase.autostash is set and used to fast-forward the history on
behalf of "git rebase". Incidentally this change also takes care of
the case where
- "git pull --rebase" (without other command line options) is run
- "rebase.autostash" is not set
- The history fast-forwards
In such a case, "git merge" is run with an explicit "--no-autostash"
to prevent it from honoring merge.autostash configuration, which is
what we want. After all, we want the "git merge" to pretend as if
it is "git rebase" while being used for this purpose.
[1] https://lore.kernel.org/git/xmqqa8cfbkeq.fsf_-_@gitster.mtv.corp.google.com/
Reported-by: Tilman Vogel <tilman.vogel@web.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* vd/sparse-clean-etc:
update-index: reduce scope of index expansion in do_reupdate
update-index: integrate with sparse index
update-index: add tests for sparse-checkout compatibility
checkout-index: integrate with sparse index
checkout-index: add --ignore-skip-worktree-bits option
checkout-index: expand sparse checkout compatibility tests
clean: integrate with sparse index
reset: reorder wildcard pathspec conditions
reset: fix validation in sparse index test
Replace unconditional index expansion in 'do_reupdate()' with one scoped to
only where a full index is needed. A full index is only required in
'do_reupdate()' when a sparse directory in the index differs from HEAD; in
that case, the index is expanded and the operation restarted.
Because the index should only be expanded if a sparse directory is modified,
add a test ensuring the index is not expanded when differences only exist
within the sparse cone.
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable use of the sparse index with `update-index`. Most variations of
`update-index` work without explicitly expanding the index or making any
other updates in or outside of `update-index.c`.
The one usage requiring additional changes is `--cacheinfo`; if a file
inside a sparse directory was specified, the index would not be expanded
until after the cache tree is invalidated, leading to a mismatch between the
index and cache tree. This scenario is handled by rearranging
`add_index_entry_with_check`, allowing `index_name_stage_pos` to expand the
index *before* attempting to invalidate the relevant cache tree path,
avoiding cache tree/index corruption.
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce tests for a variety of `git update-index` use cases, including
performance scenarios. Tests are intended to exercise `update-index` with
options that change the commands interaction with the index (e.g.,
`--again`) and with files/directories inside and outside a sparse checkout
cone.
Of note is that these tests clearly establish the behavior of `git
update-index --add` with untracked, outside-of-cone files. Unlike `git add`,
which fails with an error when provided with such files, `update-index`
succeeds in adding them to the index. Additionally, the `skip-worktree` flag
is *not* automatically added to the new entry. Although this is pre-existing
behavior, there are a couple of reasons to avoid changing it in favor of
consistency with e.g. `git add`:
* `update-index` is low-level command for modifying the index; while it can
perform operations similar to those of `add`, it traditionally has fewer
"guardrails" preventing a user from doing something they may not want to
do (in this case, adding an outside-of-cone, non-`skip-worktree` file to
the index)
* `update-index` typically only exits with an error code if it is incapable
of performing an operation (e.g., if an internal function call fails);
adding a new file outside the sparse checkout definition is still a valid
operation, albeit an inadvisable one
* `update-index` does not implicitly set flags (e.g., `skip-worktree`) when
creating new index entries with `--add`; if flags need to be updated,
options like `--[no-]skip-worktree` allow a user to intentionally set them
All this to say that, while there are valid reasons to consider changing the
treatment of outside-of-cone files in `update-index`, there are also
sufficient reasons for leaving it as-is.
Co-authored-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add repository settings to allow usage of the sparse index.
When using the `--all` option, sparse directories are ignored by default due
to the `skip-worktree` flag, so there is no need to expand the index. If
`--ignore-skip-worktree-bits` is specified, the index is expanded in order
to check out all files.
When checking out individual files, existing behavior in a full index is to
exit with an error if a directory is specified (as the directory name will
not match an index entry). However, it is possible in a sparse index to
match a directory name to a sparse directory index entry, but checking out
that sparse directory still results in an error on checkout. To reduce some
potential confusion for users, `checkout_file(...)` explicitly exits with an
informative error if provided with a sparse directory name. The test
corresponding to this scenario verifies the error message, which now differs
between sparse index and non-sparse index checkouts.
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update `checkout-index` to no longer refresh files that have the
`skip-worktree` bit set, exiting with an error if `skip-worktree` filenames
are directly provided to `checkout-index`. The newly-added
`--ignore-skip-worktree-bits` option provides a mechanism to replicate the
old behavior, checking out *all* files specified (even those with
`skip-worktree` enabled).
The ability to toggle whether files should be checked-out based on
`skip-worktree` already exists in `git checkout` and `git restore` (both of
which have an `--ignore-skip-worktree-bits` option). The change to, by
default, ignore `skip-worktree` files is especially helpful for
sparse-checkout; it prevents inadvertent creation of files outside the
sparse definition on disk and eliminates the need to expand a sparse index
when using the `--all` option.
Internal usage of `checkout-index` in `git stash` and `git filter-branch` do
not make explicit use of files with `skip-worktree` enabled, so
`--ignore-skip-worktree-bits` is not added to them.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests to cover `checkout-index`, with a focus on cases interesting in a
sparse checkout (e.g., files specified outside sparse checkout definition).
New tests are intended to serve as a baseline for existing and/or expected
behavior and performance when integrating `checkout-index` with the sparse
index. Note that the test 'checkout-index --all' is marked as
'test_expect_failure', indicating that `update-index --all` will be modified
in a subsequent patch to behave as the test expects.
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove full index requirement for `git clean` and test to ensure the index
is not expanded in `git clean`. Add to existing test for `git clean` to
verify cleanup of untracked files in sparse directories is consistent
between sparse index and non-sparse index checkouts.
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rearrange conditions in method determining whether index expansion is
necessary when a pathspec is specified for `git reset`, placing less
expensive condition first. Additionally, add details & examples to related
code comments to help with readability.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update t1092 test 'reset with pathspecs outside sparse definition' to verify
index contents. The use of `rev-parse` verifies the contents of HEAD, not
the index, providing no real validation of the reset results. Conversely,
`ls-files` reports the contents of the index (OIDs, flags, filenames), which
are then compared across checkouts to ensure compatible index states.
Fixes 741a2c9ffa (reset: expand test coverage for sparse checkouts,
2021-09-27).
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code added in 1ae2b8cda8 (reftable: add merged table view,
2021-10-07) to consistently use the "uint64_t" type. These "min" and
"max" variables get passed in the body of this function to a function
whose prototype is:
[...] reftable_writer_set_limits([...], uint64_t min, uint64_t max
This avoids the following warning on SunCC 12.5 on
gcc211.fsffrance.org:
"reftable/merged_test.c", line 27: warning: initializer does not fit or is out of range: 0xffffffff
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apparently, the IBM xlc compiler doesn't like this.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test case wants to append stuff to a loose object file to ensure
that this kind of corruption is detected. To make a read-only loose
object file writable with chmod, it is not necessary to also make
it executable. Replace the bitmask 755 with the instruction +w to
request only the write bit and to also heed the umask. And get rid
of a POSIXPERM prerequisite, which is unnecessary for the test.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a logic error in refs_resolve_ref_unsafe() introduced in a recent
series of mine to abstract the refs API away from errno. See
96f6623ada (Merge branch 'ab/refs-errno-cleanup', 2021-11-29)for that
series.
In that series introduction of "failure_errno" to
refs_resolve_ref_unsafe came in ef18119dec (refs API: add a version
of refs_resolve_ref_unsafe() with "errno", 2021-10-16). There we'd set
"errno = 0" immediately before refs_read_raw_ref(), and then set
"failure_errno" to "errno" if errno was non-zero afterwards.
Then in the next commit 8b72fea7e9 (refs API: make
refs_read_raw_ref() not set errno, 2021-10-16) we started expecting
"refs_read_raw_ref()" to set "failure_errno". It would do that if
refs_read_raw_ref() failed, but it wouldn't be the same errno.
So we might set the "errno" here to any arbitrary bad value, and end
up e.g. returning NULL when we meant to return the refname from
refs_resolve_ref_unsafe(), or the other way around. Instrumenting this
code will reveal cases where refs_read_raw_ref() will fail, and
"errno" and "failure_errno" will be set to different values.
In practice I haven't found a case where this scary bug changed
anything in practice. The reason for that is that we'll not care about
the actual value of "errno" here per-se, but only whether:
1. We have an errno
2. If it's one of ENOENT, EISDIR or ENOTDIR. See the adjacent code
added in a1c1d8170d (refs_resolve_ref_unsafe: handle d/f
conflicts for writes, 2017-10-06)
I.e. if we clobber "failure_errno" with "errno", but it happened to be
one of those three, and we'll clobber it with another one of the three
we were OK.
Perhaps there are cases where the difference ended up mattering, but I
haven't found them. Instrumenting the test suite to fail if "errno"
and "failure_errno" are different shows a lot of failures, checking if
they're different *and* one is but not the other is outside that list
of three "errno" values yields no failures.
But let's fix the obvious bug. We should just stop paying attention to
"errno" in refs_resolve_ref_unsafe(). In addition let's change the
partial resetting of "errno" in files_read_raw_ref() to happen just
before the "return", to ensure that any such bug will be more easily
spotted in the future.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Translate new messages
- Translate the word 'cone' instead of leaving it verbatim
(in the context of sparse checkout)
- Make translations of 'failed to' consistent
Signed-off-by: Fangyi Zhou <me@fangyi.io>
Reviewed-by: Teng Long <dyroneteng@gmail.com>
Reviewed-by: 依云 <lilydjwg@gmail.com>
Reviewed-by: Jiang Xin <worldhello.net@gmail.com>
Some lockfile code called free() in signal-death code path, which
has been corrected.
* ps/lockfile-cleanup-fix:
fetch: fix deadlock when cleaning up lockfiles in async signals
"git merge $signed_tag" started to drop the tag message from the
default merge message it uses by accident, which has been corrected.
* fs/ssh-signing-key-lifetime:
fmt-merge-msg: prevent use-after-free with signed tags
Notably, it lacks uncompress2(); use the fallback we ship in our
tree instead.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
shift count being exactly at 7-bit smaller than the long is OK; on
32-bit architecture, shift count starts at 4 and goes through 11, 18
and 25, at which point the guard triggers one iteration too early.
Reported-by: Marc Strapetz <marc.strapetz@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To test for a key that is completely unknown to the keyring we need one
to sign the commit with. This was done by generating a new key and not
add it into the keyring. To avoid the key generation overhead and
problems where GPG did hang in CI during it, switch GNUPGHOME to the
empty $GNUPGHOME_NOT_USED instead, therefore making all used keys unknown
for this single `verify-commit` call.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is useful to know when a branch first diverged in history
from some integration branch in order to be able to enumerate
the user's local changes. However, these local changes can
include arbitrary merges, so it is necessary to ignore this
merge structure when finding the divergence point.
In order to do this, teach the "rev-list" family to accept
"--exclude-first-parent-only", which restricts the traversal
of excluded commits to only follow first parent links.
-A-----E-F-G--main
\ / /
B-C-D--topic
In this example, the goal is to return the set {B, C, D} which
represents a topic branch that has been merged into main branch.
`git rev-list topic ^main` will end up returning no commits
since excluding main will end up traversing the commits on topic
as well. `git rev-list --exclude-first-parent-only topic ^main`
however will return {B, C, D} as desired.
Add docs for the new flag, and clarify the doc for --first-parent
to indicate that it applies to traversing the set of included
commits only.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message introduced by commit 593a2a5d06 (branch: protect branches
checked out in all worktrees, 2021-12-01) is missing a space in the
first line, add it.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The C reimplementation of "add -p" fails to split the last hunk in a
file if hunk ends with an addition or deletion without any post context
line unless it is the last file to be processed.
To determine whether a hunk can be split a counter is incremented each
time a context line follows an insertion or deletion. If at the end of
the hunk the value of this counter is greater than one then the hunk
can be split into that number of smaller hunks. If the last hunk in a
file ends with an insertion or deletion then there is no following
context line and the counter will not be incremented. This case is
already handled at the end of the loop where counter is incremented if
the last hunk ended with an insertion or deletion. Unfortunately there
is no similar check between files (likely because the perl version
only ever parses one diff at a time). Fix this by checking if the last
hunk ended with an insertion or deletion when we see the diff header
of a new file and extend the existing regression test.
Reproted-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clean up some test constructs in preparation for extending the tests
in the next commit. There are three small changes, I've grouped them
together as they're so small it didn't seem worth creating three
separate commits.
1 - "cat file | sed expression" is better written as
"sed expression file".
2 - Follow our usual practice of redirecting the output of git
commands to a file rather than piping it into another command.
3 - Use test_write_lines rather than 'printf "%s\n"'.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for the eol attribute states that it is "effectively
setting the text attribute". However, this implies that it forces the
text attribute to always be set, which has not been the case since
6523728499 ("convert: unify the "auto" handling of CRLF", 2016-06-28).
Let's avoid confusing users (and the present author when trying to
describe Git's behavior to others) by clearly documenting in which
cases the "eol" attribute has effect.
Specifically, the attribute always has an effect unless the file is
explicitly set as -text, or the file is set as text=auto and the file is
detected as binary.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now, it isn't clear what the behavior is when the eol attribute is
set in .gitattributes but the text attribute is not. Let's add some
tests to document this behavior in our code, which happens to be that
the behavior is as if we set the text attribute implicitly. This will
make sure we don't accidentally change the behavior, which somebody is
probably relying on, and serve as documentation to developers.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a typo in my recent 03dc51fe849 (cat-file: fix remaining usage
bugs, 2021-10-09).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix up whitespace issues around "(... | ...)" in the SYNOPSIS and
usage. These were introduced in ab/cat-file series. See
e145efa6059 (Merge branch 'ab/cat-file' into next, 2022-01-05). In
particular 57d6a1cf96, 5a40417876 and 97fe725075 in that series.
We'll now correctly emit this usage output:
$ git cat-file -h
usage: git cat-file <type> <object>
or: git cat-file (-e | -p) <object>
or: git cat-file (-t | -s) [--allow-unknown-type] <object>
[...]
Before this the last line of that would be inconsistent with the
preceding "(-e | -p)":
or: git cat-file ( -t | -s ) [--allow-unknown-type] <object>
Reported-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Includes extra translation for branch.c:313 which has an
upstream whitespace error that is expected to be fixed.
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
Switching out manual arg parsing for the parse-options API for the
expire and delete subcommands.
Move explicit_expiry flag into cmd_reflog_expire_cb struct so callbacks
can set both the value of the timestamp as well as the explicit_expiry
flag.
Signed-off-by: "John Cai" <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When merging a signed tag, fmt_merge_msg_sigs() is responsible for
populating the body of the merge message with the names of the signed
tags, their signatures, and the validity of those signatures.
In 02769437e1 (ssh signing: use sigc struct to pass payload,
2021-12-09), check_signature() was taught to pass the object payload via
the sigc struct instead of passing the payload buffer separately.
In effect, 02769437e1 causes buf, and sigc.payload to point at the same
region in memory. This causes a problem for fmt_tag_signature(), which
wants to read from this location, since it is freed beforehand by
signature_check_clear() (which frees it via sigc's `payload` member).
That makes the subsequent use in fmt_tag_signature() a use-after-free.
As a result, merge messages did not contain the body of any signed tags.
Luckily, they tend not to contain garbage, either, since the result of
strstr()-ing the object buffer in fmt_tag_signature() is guarded:
const char *tag_body = strstr(buf, "\n\n");
if (tag_body) {
tag_body += 2;
strbuf_add(tagbuf, tag_body, buf + len - tag_body);
}
Unfortunately, the tests in t6200 did not catch this at the time because
they do not search for the body of signed tags in fmt-merge-msg's
output.
Resolve this by waiting to call signature_check_clear() until after its
contents can be safely discarded. Harden ourselves against any future
regressions in this area by making sure we can find signed tag messages
in the output of fmt-merge-msg, too.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two identical declarations of `ensure_full_index()` in
cache.h.
Commit 3964fc2aae ("sparse-index: add guard to ensure full index",
2021-03-30) provided an empty implementation of `ensure_full_index()`,
declaring it in a new file sparse-index.h. When commit 4300f8442a
("sparse-index: implement ensure_full_index()", 2021-03-30) fleshed out
the implementation, it added an identical declaration to cache.h.
Then 118a2e8bde ("cache: move ensure_full_index() to cache.h",
2021-04-01) favored having the declaration in cache.h. Because of the
double declaration, at that point we could have just dropped the one in
sparse-index.h, but instead it got moved to cache.h.
As a result, cache.h contains the exact same function declaration twice.
Drop the one under "/* Name hashing */", in favor of the one under
"/* Initialize and use the cache information */".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using a buffer limited to 2048 is unnecessarily limiting. Switch to
using a string buffer to read in stdin for annotation.
Signed-off-by: "John Cai" <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a --annotate-stdin that is functionally equivalent of --stdin.
--stdin does not behave as --stdin in other subcommands, such as
pack-objects whereby it takes one argument per line. Since --stdin can
be a confusing and misleading name, rename it to --annotate-stdin.
This change adds a warning to --stdin warning that it will be removed in
the future.
Signed-off-by: "John Cai" <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christoph Reiter reported on the Git for Windows issue tracker[1], that
mingw_strftime() imports strftime() from ucrtbase.dll with the wrong
calling convention. It should be __cdecl instead of WINAPI, which we
always use in DECLARE_PROC_ADDR().
The MSYS2 project encountered cmake sefaults on x86 Windows caused by
the same issue in the cmake source. [2] There are no known git crashes
that where caused by this, yet, but we should try to prevent them.
We import two other non-WINAPI functions via DECLARE_PROC_ADDR(), too.
* NtSetSystemInformation() (NTAPI)
* GetUserNameExW() (SEC_ENTRY)
NTAPI, SEC_ENTRY and WINAPI are all ususally defined as __stdcall,
but there are circumstances where they're defined differently.
Teach DECLARE_PROC_ADDR() about calling conventions and be explicit
about when we want to use which calling convention.
Import winnt.h for the definition of NTAPI and sspi.h for SEC_ENTRY
near their respective only users.
[1] https://github.com/git-for-windows/git/issues/3560
[2] https://github.com/msys2/MINGW-packages/issues/10152
Reported-By: Christoph Reiter <reiter.christoph@gmail.com>
Signed-off-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like in the previous patch for compat/qsort_s.c, remove the optimization
of using an on-stack buffer to avoid small allocations. This ensures
maximum alignment for the array elements and simplifies the code a bit.
The performance impact for the current callers is unlikely to be
noticeable:
* compat/mingw.c::make_environment_block() uses ALLOC_ARRAY and
ALLOC_GROW several times already, so another allocation of up to 1KB
should not matter much.
* diffcore-rename.c::diffcore_rename_extended() is called once per diff
or twice per merge, and those require allocations for each object and
more already.
* merge-ort.c::detect_and_process_renames() is called once per merge.
It's responsible for the two per-merge diffcore_rename_extended()
calls mentioned above as well, though. So this is possibly the most
impacted caller. Per-object allocations are likely to dwarf the
additional small allocations in git_stable_qsort(), though.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new hook.h library has replaced all run-command.h hook-related
functionality. So let's delete this dead code.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the push-to-checkout hook away from run-command.h to and over to
the new hook.h library.
This removes the last direct user of run_hook_le(), so we could remove
that function now, but let's leave that to a follow-up cleanup commit.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the post-index-change hook away from run-command.h to and over to
the new hook.h library.
This removes the last direct user of "run_hook_ve()" outside of
run-command.c ("run_hook_le()" still uses it). So we can make the
function static now. A subsequent commit will remove this code
entirely when "run_hook_le()" itself goes away.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of duplicating the behavior of run-command.h:run_hook_le() in
Python, we can directly call 'git hook run'. We emulate the existence
check with the --ignore-missing flag.
We're dropping the "verbose" handling added in 9f59ca4d6a (git-p4:
create new function run_git_hook, 2020-02-11), those who want
diagnostic output about how hooks are run are now able to get that via
e.g. the trace2 facility and GIT_TRACE=1.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "sendmail-validate" hook to be run via the "git hook run"
wrapper instead of via a direct invocation.
This is the smallest possibly change to get "send-email" using "git
hook run". We still check the hook itself with "-x", and set a
"GIT_DIR" variable, both of which are asserted by our tests. We'll
need to get rid of this special behavior if we start running N hooks,
but for now let's be as close to bug-for-bug compatible as possible.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For certain one-shot hooks we'd like to optimistically run them, and
not complain if they don't exist.
This was already supported by the underlying hook.c library, but had
not been exposed via "git hook run". The command version of this will
be used by send-email in a subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the running of the 'post-checkout' hook away from run-command.h
to the new hook.h library in builtin/worktree.c. For this special case
we need a change to the hook API to teach it to run the hook from a
given directory.
We cannot skip the "absolute_path" flag and just check if "dir" is
specified as we'd then fail to find our hook in the new dir we'd
chdir() to. We currently don't have a use-case for running a hook not
in our "base" repository at a given absolute path, so let's have "dir"
imply absolute_path(find_hook(hook_name)).
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the running of the 'post-checkout' hook away from run-command.h
to the new hook.h library, except in the case of
builtin/worktree.c. That special-case will be handled in a subsequent
commit.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the pre-rebase hook away from run-command.h to and over to the
new hook.h library.
Since this hook needs arguments introduce a run_hooksl() wrapper, like
run_hooks(), but it takes varargs.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a run_hooks_l() wrapper, we'll use it in subsequent commits for
the simple cases of wanting to run a single hook under a given name
along with a list of arguments.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach pre-applypatch and post-applypatch to use the hook.h library
instead of the run-command.h library.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the pre-auto-gc hook away from run-command.h to and over to the
new hook.h library. This uses the new run_hooks() wrapper.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a run_hooks() wrapper, we'll use it in subsequent commits for the
simple cases of wanting to run a single hook under a given name,
without providing options such as "env" or "args".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to enable hooks to be run as an external process, by a
standalone Git command, or by tools which wrap Git, provide an external
means to run all configured hook commands for a given hook event.
Most of our hooks require more complex functionality than this, but
let's start with the bare minimum required to support our simplest
hooks.
In terms of implementation the usage_with_options() and "goto usage"
pattern here mirrors that of
builtin/{commit-graph,multi-pack-index}.c.
Some of the implementation here, such as a function being named
run_hooks_opt() when it's tasked with running one hook, to using the
run_processes_parallel_tr2() API to run with jobs=1 is somewhere
between a bit odd and and an overkill for the current features of this
"hook run" command and the hook.[ch] API.
This code will eventually be able to run multiple hooks declared in
config in parallel, by starting out with these names and APIs we
reduce the later churn of renaming functions, switching from the
run_command() to run_processes_parallel_tr2() API etc.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The compatibility definition for qsort_s() uses "char buffer[1024]"
on the stack to avoid making malloc() calls for small temporary
space, which essentially hand-rolls alloca().
But the elements of the array being sorted may have alignment needs
more strict than what an array of bytes may have. &buf[0] may be
word aligned, but using the address as if it stores the first
element of an array of a struct, whose first member may need to be
aligned on double-word boundary, would be a no-no.
We could use xalloca() from git-compat-util.h, or alloca() directly
on platforms with HAVE_ALLOCA_H, but let's try using unconditionally
xmalloc() before we know the performance characteristics of the
callers.
It may not make much of an argument to inspect the current callers
and say "it shouldn't matter to any of them", but anyway:
* The one in object-name.c is used to sort potential matches to a
given ambiguous object name prefix in the error path;
* The one in pack-write.c is done once per a pack .idx file being
written to create the reverse index, so (1) the cost of malloc()
overhead is dwarfed by the cost of the packing operation, and (2)
the number of entries being sorted is the number of objects in a
pack;
* The one in ref-filter.c is used by "branch --list", "tag --list",
and "for-each-ref", only once per operation. We sort an array of
pointers with entries, each corresponding to a ref that is shown.
* The one in string-list.c is used by sort_string_list(), which is
way too generic to assume any access patterns, so it may or may
not matter, but I do not care too much ;-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching packfiles, we write a bunch of lockfiles for the packfiles
we're writing into the repository. In order to not leave behind any
cruft in case we exit or receive a signal, we register both an exit
handler as well as signal handlers for common signals like SIGINT. These
handlers will then unlink the locks and free the data structure tracking
them. We have observed a deadlock in this logic though:
(gdb) bt
#0 __lll_lock_wait_private () at ../sysdeps/unix/sysv/linux/x86_64/lowlevellock.S:95
#1 0x00007f4932bea2cd in _int_free (av=0x7f4932f2eb20 <main_arena>, p=0x3e3e4200, have_lock=0) at malloc.c:3969
#2 0x00007f4932bee58c in __GI___libc_free (mem=<optimized out>) at malloc.c:2975
#3 0x0000000000662ab1 in string_list_clear ()
#4 0x000000000044f5bc in unlock_pack_on_signal ()
#5 <signal handler called>
#6 _int_free (av=0x7f4932f2eb20 <main_arena>, p=<optimized out>, have_lock=0) at malloc.c:4024
#7 0x00007f4932bee58c in __GI___libc_free (mem=<optimized out>) at malloc.c:2975
#8 0x000000000065afd5 in strbuf_release ()
#9 0x000000000066ddb9 in delete_tempfile ()
#10 0x0000000000610d0b in files_transaction_cleanup.isra ()
#11 0x0000000000611718 in files_transaction_abort ()
#12 0x000000000060d2ef in ref_transaction_abort ()
#13 0x000000000060d441 in ref_transaction_prepare ()
#14 0x000000000060e0b5 in ref_transaction_commit ()
#15 0x00000000004511c2 in fetch_and_consume_refs ()
#16 0x000000000045279a in cmd_fetch ()
#17 0x0000000000407c48 in handle_builtin ()
#18 0x0000000000408df2 in cmd_main ()
#19 0x00000000004078b5 in main ()
The process was killed with a signal, which caused the signal handler to
kick in and try free the data structures after we have unlinked the
locks. It then deadlocks while calling free(3P).
The root cause of this is that it is not allowed to call certain
functions in async-signal handlers, as specified by signal-safety(7).
Next to most I/O functions, this list of disallowed functions also
includes memory-handling functions like malloc(3P) and free(3P) because
they may not be reentrant. As a result, if we execute such functions in
the signal handler, then they may operate on inconistent state and fail
in unexpected ways.
Fix this bug by not calling non-async-signal-safe functions when running
in the signal handler. We're about to re-raise the signal anyway and
will thus exit, so it's not much of a problem to keep the string list of
lockfiles untouched. Note that it's fine though to call unlink(2), so
we'll still clean up the lockfiles correctly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to trim \r from the output of 'ssh-keygen -Y find-principals' on
Windows, or we end up calling 'ssh-keygen -Y verify' with a bogus signer
identity. ssh-keygen.c:2841 contains a call to puts(3), which confirms
this hypothesis. Signature verification passes with the fix.
Helped-by: Pedro Martelletto <pedro@yubico.com>
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git update-index --refresh' and '--really-refresh' should force writing
of the index file if racy timestamps have been encountered, as
'git status' already does [1].
Note that calling 'git update-index --refresh' still does not guarantee
that there will be no more racy timestamps afterwards (the same holds
true for 'git status'):
- calling 'git update-index --refresh' immediately after touching and
adding a file may still leave racy timestamps if all three operations
occur within the racy-tolerance (usually 1 second unless USE_NSEC has
been defined)
- calling 'git update-index --refresh' for timestamps which are set into
the future will leave them racy
To guarantee that such racy timestamps will be resolved would require to
wait until the system clock has passed beyond these timestamps and only
then write the index file. Especially for future timestamps, this does
not seem feasible because of possibly long delays/hangs.
[1] https://lore.kernel.org/git/d3dd805c-7c1d-30a9-6574-a7bfcb7fc013@syntevo.com/
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" fixes racy timestamps regardless of the worktree being
dirty or not. The new test cases capture this behavior.
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add functions `test_set_magic_mtime` and `test_is_magic_mtime` which can
be used to (re)set the mtime of a file to a predefined ("magic")
timestamp, then perform some operations and finally check for mtime
changes of the file.
The core implementation follows the suggestion from the
mailing list [1].
[1] https://lore.kernel.org/git/xmqqczl5hpaq.fsf@gitster.g/T/#u
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Symlink changes are tracked in a string_list, with the util pointer
value indicating whether a symlink is kept or removed. Using fake
pointer values requires awkward casts. Use one strset for each type of
change instead to simplify and shorten the code.
Original-patch-by: Jessica Clarke <jrtc27@jrtc27.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CalledProcessError is an exception class from the subprocess namespace.
When raising this exception, git-p4 would instantiate CalledProcessError
objects without properly referencing the subprocess namespace causing
the script to fail.
Resolves the issue by replacing CalledProcessError with
subprocess.CalledProcessError.
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the git-p4 script would log commands as stringified
representations of the command parameter, leading to output such as
this:
Reading pipe: ['git', 'config', '--bool', 'git-p4.useclientspec']
Now that all commands are list objects, this patch instead joins the
elements of the list into a single string so the output now looks more
readable:
Reading pipe: git config --bool git-p4.useclientspec
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the majority of the subprocess calls where shell=True was used, it
was only needed to parse command arguments by spaces. In each of these
cases, the commands are now being passed in as lists instead of strings.
This change aids the comprehensibility of the code. Constucting commands
and arguments using strings risks bugs from unsanitized inputs, and the
attendant complexity of properly quoting and escaping command arguments.
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the script would invoke subprocess functions setting the
shell argument True if the command argument was a string, setting it
False otherwise.
This patch replaces this implicit type-driven behaviour with explicit
shell arguments specified by the caller.
The apparent motive for the implict behaviour is that the subprocess
functions do not divide command strings into args. Invoking
subprocess.call("echo hello") will attempt to execute a program by the
name "echo hello". With subprocess.call("echo hello", shell=True), sh
-c "echo hello" will be executed instead, which will cause the command
and args to be divided by spaces.
Eventually, all usage of shell=True, that is not necessary for some
purpose beyond parsing command strings, should be removed. For now,
this patch makes the usage of shells explicit.
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar spirit as a previous commit, use the new `grep_and_expr()`
to construct the AND node in `compile_pattern_and()`.
Unlike the aforementioned previous commit, this is not about code
duplication, since this is the only spot in grep.c where an AND node is
constructed. Rather, this is about visual consistency with the other
`compile_pattern_xyz()` functions.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two functions that have very similar logic of finding a header
value. find_commit_header, and find_header. We can conslidate the logic
by introducing a new function find_header_mem, which is equivalent to
find_commit_header except it takes a len parameter that determines how
many bytes will be read. find_commit_header and find_header can then both
call find_header_mem.
This reduces duplicate logic, as the logic for finding header values
can now all live in one place.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When constructing an OR node, the grep.c code uses `grep_or_expr()` to
make a node, assign its kind, and set its left and right children. The
same is not done for AND nodes.
Prepare to introduce a new `grep_and_expr()` function which will share
code with the existing implementation of `grep_or_expr()` by introducing
a new function which compiles either kind of binary expression, and
reimplement `grep_or_expr()` in terms of it.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the definition of grep_not_expr() up and use this function in
compile_pattern_not() to simplify the code and reduce duplication.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the definition of grep_or_expr() up and use this function in
compile_pattern_or() to reduce code duplication.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/reflog-prep:
reflog + refs-backend: move "verbose" out of the backend
refs files-backend: assume cb->newlog if !EXPIRE_REFLOGS_DRY_RUN
reflog: reduce scope of "struct rev_info"
reflog expire: don't use lookup_commit_reference_gently()
reflog expire: refactor & use "tip_commit" only for UE_NORMAL
reflog expire: use "switch" over enum values
reflog: change one->many worktree->refnames to use a string_list
reflog expire: narrow scope of "cb" in cmd_reflog_expire()
reflog delete: narrow scope of "cmd" passed to count_reflog_ent()
Change the cat_one_file() logic that calls get_oid_with_context()
under --textconv and --filters to use the GET_OID_ONLY_TO_DIE flag,
thus improving the error messaging emitted when e.g. <path> is missing
but <rev> is not.
To service the "cat-file" use-case we need to introduce a new
"GET_OID_REQUIRE_PATH" flag, otherwise it would exit early as soon as
a valid "HEAD" was resolved, but in the "cat-file" case being changed
we always need a valid revision and path.
This arguably makes the "<bad rev>:<bad path>" and "<bad
rev>:<good (in HEAD) path>" use cases worse, as we won't quote the
<path> component at the user anymore, but let's just use the existing
logic "git log" et al use for now. We can improve the messaging for
those cases as a follow-up for all callers.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop having GET_OID_ONLY_TO_DIE imply GET_OID_QUIETLY in
get_oid_with_context_1().
The *_DIE flag was added in 33bd598c39 (sha1_name.c: teach lookup
context to get_sha1_with_context(), 2012-07-02), and then later
tweaked in 7243ffdd78 (get_sha1: avoid repeating ourselves via
ONLY_TO_DIE, 2016-09-26).
Everything in that commit makes sense, but only for callers that
expect to fail in an initial call to get_oid_with_context_1(), e.g. as
"git show 0017" does via handle_revision_arg(), and then would like to
call get_oid_with_context_1() again via this
maybe_die_on_misspelt_object_name() function.
In the subsequent commit we'll add a new caller that expects to call
this only once, but who would still like to have all the error
messaging that GET_OID_ONLY_TO_DIE gives it, in addition to any
regular errors.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the usage output emitted on "git cat-file -h" to group related
options, making it clear to users which options go with which other
ones.
The new output is:
Check object existence or emit object contents
-e check if <object> exists
-p pretty-print <object> content
Emit [broken] object attributes
-t show object type (one of 'blob', 'tree', 'commit', 'tag', ...)
-s show object size
--allow-unknown-type allow -s and -t to work with broken/corrupt objects
Batch objects requested on stdin (or --batch-all-objects)
--batch[=<format>] show full <object> or <rev> contents
--batch-check[=<format>]
like --batch, but don't emit <contents>
--batch-all-objects with --batch[-check]: ignores stdin, batches all known objects
Change or optimize batch output
--buffer buffer --batch output
--follow-symlinks follow in-tree symlinks
--unordered do not order objects before emitting them
Emit object (blob or tree) with conversion or filter (stand-alone, or with batch)
--textconv run textconv on object's content
--filters run filters on object's content
--path blob|tree use a <path> for (--textconv | --filters ); Not with 'batch'
The old usage was:
<type> can be one of: blob, tree, commit, tag
-t show object type
-s show object size
-e exit with zero when there's no error
-p pretty-print object's content
--textconv for blob objects, run textconv on object's content
--filters for blob objects, run filters on object's content
--batch-all-objects show all objects with --batch or --batch-check
--path <blob> use a specific path for --textconv/--filters
--allow-unknown-type allow -s and -t to work with broken/corrupt objects
--buffer buffer --batch output
--batch[=<format>] show info and content of objects fed from the standard input
--batch-check[=<format>]
show info about objects fed from the standard input
--follow-symlinks follow in-tree symlinks (used with --batch or --batch-check)
--unordered do not order --batch-all-objects output
While shorter, I think the new one is easier to understand, as
e.g. "--allow-unknown-type" is grouped with "-t" and "-s", as it can
only be combined with those options. The same goes for "--buffer",
"--unordered" etc.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the migration of --batch-all-objects to OPT_CMDMODE() in the
preceding commit one bug with combining it and other OPT_CMDMODE()
options was solved, but we were still left with e.g. --buffer silently
being discarded when not in batch mode.
Fix all those bugs, and in addition emit errors telling the user
specifically what options can't be combined with what other options,
before this we'd usually just emit the cryptic usage text and leave
the users to work it out by themselves.
This change is rather large, because to do so we need to untangle the
options processing so that we can not only error out, but emit
sensible errors, and e.g. emit errors about options before errors
about stray argc elements (as they might become valid if the option
were removed).
Some of the output changes ("error:" to "fatal:" with
usage_msg_opt[f]()), but none of the exit codes change, except in
those cases where we silently accepted bad option combinations before,
now we'll error out.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage of OPT_CMDMODE() in "cat-file"[1] was added in parallel with
the development of[3] the --batch-all-objects option[4], so we've
since grown[5] checks that it can't be combined with other command
modes, when it should just be made a top-level command-mode
instead. It doesn't combine with --filters, --textconv etc.
By giving parse_options() information about what options are mutually
exclusive with one another we can get the die() message being removed
here for free, we didn't even use that removed message in some cases,
e.g. for both of:
--batch-all-objects --textconv
--batch-all-objects --filters
We'd take the "goto usage" in the "if (opt)" branch, and never reach
the previous message. Now we'll emit e.g.:
$ git cat-file --batch-all-objects --filters
error: option `filters' is incompatible with --batch-all-objects
1. b48158ac94 (cat-file: make the options mutually exclusive, 2015-05-03)
2. https://lore.kernel.org/git/xmqqtwspgusf.fsf@gitster.dls.corp.google.com/
3. https://lore.kernel.org/git/20150622104559.GG14475@peff.net/
4. 6a951937ae (cat-file: add --batch-all-objects option, 2015-06-22)
5. 321459439e (cat-file: support --textconv/--filters in batch mode, 2016-09-09)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no benefit to defining this at a distance, and it makes the
code harder to read as you've got to scroll up to see the usage that
corresponds to the options.
In subsequent commits I'll make use of usage_msg_opt(), which will be
quite noisy if I have to use the long "cat_file_usage" variable,
there's no other command being defined in this file, so let's rename
it to just "usage".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were various inaccuracies in the previous SYNOPSIS output,
e.g. "--path" is not something that can optionally go with any options
except --textconv or --filters, as the output implied.
The opening line of the DESCRIPTION section is also "In its first
form[...]", which refers to "git cat-file <type> <object>", but the
SYNOPSIS section wasn't showing that as the first form!
That part of the documentation made sense in
d83a42f34a (Documentation: minor grammatical fixes in
git-cat-file.txt, 2009-03-22) when it was introduced, but since then
various options that were added have made that intro make no sense in
the context it was in. Now the two will match again.
The usage output here is not properly aligned on "master" currently,
but will be with my in-flight 4631cfc20b (parse-options: properly
align continued usage output, 2021-09-21), so let's indent things
correctly in the C code in anticipation of that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a usage_msg_optf() as a shorthand for the sort of
usage_msg_opt(xstrfmt(...)) used in builtin/stash.c. I'll make more
use of this function in builtin/cat-file.c shortly.
The disconnect between the "..." and "fmt" is a bit unusual, but it
works just fine and this keeps it consistent with usage_msg_opt(),
i.e. a caller of it can be moved to usage_msg_optf() and not have to
have its arguments re-arranged.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for the output that's emitted when we disambiguate
<obj>:<path> in cat-file. This gives us a baseline for improving these
messages.
For e.g. "git blame" we'll emit:
$ git blame HEAD:foo
fatal: no such path 'HEAD:foo' in HEAD
But cat-file doesn't disambiguate these two cases, and just gives the
rather unhelpful:
$ git cat-file --textconv HEAD:foo
fatal: Not a valid object name HEAD:foo
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stress test the usage emitted when options are combined in ways that
isn't supported. Let's test various option combinations, some of these
we buggily allow right now.
E.g. this reveals a bug in 321459439e (cat-file: support
--textconv/--filters in batch mode, 2016-09-09) that we'll fix in a
subsequent commit. We're supposed to be emitting a relevant message
when --batch-all-objects is combined with --textconv or --filters, but
we don't.
The cases of needing to assign to opt=2 in the "opt" loop are because
on those we do the right thing already, in subsequent commits the
"test_expect_failure" cases will be fixed, and the for-loops unified.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
