There were some classes of errors that "git fsck" diagnosed to its
standard error that did not cause it to exit with non-zero status.
* jc/fsck-dropped-errors:
fsck: exit with non-zero when problems are found
Performance-measurement tests did not work without an installed Git.
* sb/perf-without-installed-git:
t/perf: make runner work even if Git is not installed
On a case insensitive filesystems, setting GIT_WORK_TREE variable
using a random cases that does not agree with what the filesystem
thinks confused Git that it wasn't inside the working tree.
* js/icase-wt-detection:
setup: fix "inside work tree" detection on case-insensitive filesystems
When "git am" was rewritten as a built-in, it stopped paying
attention to user.signingkey, which was fixed.
* pt/am-builtin:
am: configure gpg at startup
After "git checkout --detach", "git status" reported a fairly
useless "HEAD detached at HEAD", instead of saying at which exact
commit.
* mm/detach-at-HEAD-reflog:
status: don't say 'HEAD detached at HEAD'
t3203: test 'detached at' after checkout --detach
"git rebase -i" had a minor regression recently, which stopped
considering a line that begins with an indented '#' in its insn
sheet not a comment, which is now fixed.
* gr/rebase-i-drop-warn:
rebase-i: loosen over-eager check_bad_cmd check
rebase-i: explicitly accept tab as separator in commands
Description of the "log.follow" configuration variable in "git log"
documentation is now also copied to "git config" documentation.
* dt/log-follow-config:
log: Update log.follow doc and add to config.txt
Allocation related functions and stdio are unsafe things to call
inside a signal handler, and indeed killing the pager can cause
glibc to deadlock waiting on allocation mutex as our signal handler
tries to free() some data structures in wait_for_pager(). Reduce
these unsafe calls.
* ti/glibc-stdio-mutex-from-signal-handler:
pager: don't use unsafe functions in signal handlers
The way how --ref/--notes to specify the notes tree reference are
DWIMmed was not clearly documented.
* jk/notes-dwim-doc:
notes: correct documentation of DWIMery for notes references
Customization to change the behaviour with "make -w" and "make -s"
in our Makefile was broken when they were used together.
* jk/make-findstring-makeflags-fix:
Makefile: fix MAKEFLAGS tests with multiple flags
The Makefile always runs the library archiver with hardcoded "crs"
options, which was inconvenient for exotic platforms on which
people want to use programs with totally different set of command
line options.
* jw/make-arflags-customizable:
Makefile: allow $(ARFLAGS) specified from the command line
The ssh transport, just like any other transport over the network,
did not clear GIT_* environment variables, but it is possible to
use SendEnv and AcceptEnv to leak them to the remote invocation of
Git, which is not a good idea at all. Explicitly clear them just
like we do for the local transport.
* jk/connect-clear-env:
git_connect: clarify conn->use_shell flag
git_connect: clear GIT_* environment for ssh
"git blame --first-parent v1.0..v2.0" was not rejected but did not
limit the blame to commits on the first parent chain.
* jk/blame-first-parent:
blame: handle --first-parent
Very small number of options take a parameter that is optional
(which is not a great UI element as they can only appear at the end
of the command line). Add notice to documentation of each and
every one of them.
* mm/keyid-docs:
Documentation: explain optional arguments better
Documentation/grep: fix documentation of -O
Documentation: use 'keyid' consistently, not 'key-id'
All the other placeholders are already shown that way.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A big comment at the beginning of quote.c is really
related to sq_quote_buf(), so let's move it in front
of this function.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 77d604c (Enhanced sq_quote(), 10 Oct 2005), the
comment at the beginning of quote.c is broken.
Let's fix it.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linked checkouts are known under the name worktree, now. Rename the test
accordingly.
Specifically, this avoids the confusion that t2026 is actually not about
pruning in or with linked checkouts aka worktress but about pruning
worktrees, i.e. about "git worktree prune" rather than "git prune".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/config.txt does not include the documentation for
log.follow that is in Documentation/git-log.txt. This commit adds the
log.follow documentation to config.txt and also updates the wording to
be consistent with the format that is followed by other boolean
configuration variables.
Signed-off-by: Eric N. Vander Weele <ericvw@gmail.com>
Acked-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
804098bb (git rebase -i: add static check for commands and SHA-1,
2015-06-29) tried to check all insns before running any in the todo
list, but it did so by implementing its own parser that is a lot
stricter than necessary. We used to allow lines that are indented
(including comment lines), and we used to allow a whitespace between
the insn and the commit object name to be HT, among other things,
that are flagged as an invalid line by mistake.
Fix this by using the same tokenizer that is used to parse the todo
list file in the new check.
Whether it's a good thing to accept indented comments is
debatable (other commands like "git commit" do not accept them), but we
already accepted them in the past, and some people and scripts rely on
this behavior. Also, a line starting with space followed by a '#' cannot
have any meaning other than being a comment, hence it doesn't harm to
accept them as comments.
Largely based on patch by: Junio C Hamano <gitster@pobox.com>
[jc: updated test with quickfix from Torsten Bögershausen]
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-rebase-todo is parsed several times with different parsers. In
principle, the user input is normalized by transform_todo_ids and
further parsing can be stricter.
In case the user wrote
pick deadbeef<TAB>commit message
the parser of transform_todo_ids was considering the sha1 to be
"deadbeef<TAB>commit", and was leaving the tab in the transformed sheet.
In practice, this went unnoticed since the actual command interpretation
was done later in do_next which did accept the tab as a separator.
Make it explicit in the code of transform_todo_ids that tabs are
accepted. This way, code that mimicks it will also accept tabs as
separator.
A similar construct appears in skip_unnecessary_picks, but this one
comes after transform_todo_ids, hence reads the normalized format, so it
needs not be changed.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After using "git checkout --detach", the reflog is left with an entry
like
checkout: moving from ... to HEAD
This message is parsed to generate the 'HEAD detached at' message in
'git branch' and 'git status', which leads to the not-so-useful message
'HEAD detached at HEAD'.
Instead, when parsing such reflog entry, resolve HEAD to the
corresponding commit in the reflog, so that the message becomes 'HEAD
detached at $sha1'.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This currently fails: the output is 'HEAD detached at HEAD'.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new builtin am ignores the user.signingkey variable: gpg is being
called with the committer details as the key ID, which may not be
correct. git_gpg_config is responsible for handling that variable and is
expected to be called on initialization by any modules that use gpg.
Signed-off-by: Renee Margaret McConahy <nepella@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit enforces MAX_XDIFF_SIZE at the
interfaces to xdiff: xdi_diff (which calls xdl_diff) and
ll_xdl_merge (which calls xdl_merge).
But we have another direct call to xdl_merge in
merge-file.c. If it were written today, this probably would
just use the ll_merge machinery. But it predates that code,
and uses slightly different options to xdl_merge (e.g.,
ZEALOUS_ALNUM).
We could try to abstract out an xdi_merge to match the
existing xdi_diff, but even that is difficult. Rather than
simply report error, we try to treat large files as binary,
and that distinction would happen outside of xdi_merge.
The simplest fix is to just replicate the MAX_XDIFF_SIZE
check in merge-file.c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The xdiff code is not prepared to handle extremely large
files. It uses "int" in many places, which can overflow if
we have a very large number of lines or even bytes in our
input files. This can cause us to produce incorrect diffs,
with no indication that the output is wrong. Or worse, we
may even underallocate a buffer whose size is the result of
an overflowing addition.
We're much better off to tell the user that we cannot diff
or merge such a large file. This patch covers both cases,
but in slightly different ways:
1. For merging, we notice the large file and cleanly fall
back to a binary merge (which is effectively "we cannot
merge this").
2. For diffing, we make the binary/text distinction much
earlier, and in many different places. For this case,
we'll use the xdi_diff as our choke point, and reject
any diff there before it hits the xdiff code.
This means in most cases we'll die() immediately after.
That's not ideal, but in practice we shouldn't
generally hit this code path unless the user is trying
to do something tricky. We already consider files
larger than core.bigfilethreshold to be binary, so this
code would only kick in when that is circumvented
(either by bumping that value, or by using a
.gitattribute to mark a file as diffable).
In other words, we can avoid being "nice" here, because
there is already nice code that tries to do the right
thing. We are adding the suspenders to the nice code's
belt, so notice when it has been worked around (both to
protect the user from malicious inputs, and because it
is better to die() than generate bogus output).
The maximum size was chosen after experimenting with feeding
large files to the xdiff code. It's just under a gigabyte,
which leaves room for two obvious cases:
- a diff3 merge conflict result on files of maximum size X
could be 3*X plus the size of the markers, which would
still be only about 3G, which fits in a 32-bit int.
- some of the diff code allocates arrays of one int per
record. Even if each file consists only of blank lines,
then a file smaller than 1G will have fewer than 1G
records, and therefore the int array will fit in 4G.
Since the limit is arbitrary anyway, I chose to go under a
gigabyte, to leave a safety margin (e.g., we would not want
to overflow by allocating "(records + 1) * sizeof(int)" or
similar.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call into xdiff to perform a diff, we generally lose
the return code completely. Typically by ignoring the return
of our xdi_diff wrapper, but sometimes we even propagate
that return value up and then ignore it later. This can
lead to us silently producing incorrect diffs (e.g., "git
log" might produce no output at all, not even a diff header,
for a content-level diff).
In practice this does not happen very often, because the
typical reason for xdiff to report failure is that it
malloc() failed (it uses straight malloc, and not our
xmalloc wrapper). But it could also happen when xdiff
triggers one our callbacks, which returns an error (e.g.,
outf() in builtin/rerere.c tries to report a write failure
in this way). And the next patch also plans to add more
failure modes.
Let's notice an error return from xdiff and react
appropriately. In most of the diff.c code, we can simply
die(), which matches the surrounding code (e.g., that is
what we do if we fail to load a file for diffing in the
first place). This is not that elegant, but we are probably
better off dying to let the user know there was a problem,
rather than simply generating bogus output.
We could also just die() directly in xdi_diff, but the
callers typically have a bit more context, and can provide a
better message (and if we do later decide to pass errors up,
we're one step closer to doing so).
There is one interesting case, which is in diff_grep(). Here
if we cannot generate the diff, there is nothing to match,
and we silently return "no hits". This is actually what the
existing code does already, but we make it a little more
explicit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
-u <exec> has never been supported, but it was mentioned since
0a2bb55 (git ls-remote: make usage string match manpage -
2008-11-11). Nobody has complained about it for seven years, it's
probably safe to say nobody cares. So let's remove "-u" in documents
instead of adding code to support it.
While at there, fix --upload-pack syntax too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git has a config variable to indicate that it is operating on a file
system that is case-insensitive: core.ignoreCase. But the
`dir_inside_of()` function did not respect that. As a result, if Git's
idea of the current working directory disagreed in its upper/lower case
with the `GIT_WORK_TREE` variable (e.g. `C:\test` vs `c:\test`) the
user would be greeted by the error message
fatal: git-am cannot be used without a working tree.
when trying to run a rebase.
This fixes https://github.com/git-for-windows/git/issues/402 (reported by
Daniel Harding).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, libcurl will follow circular http redirects
forever. Let's put a cap on this so that somebody who can
trigger an automated fetch of an arbitrary repository (e.g.,
for CI) cannot convince git to loop infinitely.
The value chosen is 20, which is the same default that
Firefox uses.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, libcurl would follow redirection to any protocol
it was compiled for support with. This is desirable to allow
redirection from HTTP to HTTPS. However, it would even
successfully allow redirection from HTTP to SFTP, a protocol
that git does not otherwise support at all. Furthermore
git's new protocol-whitelisting could be bypassed by
following a redirect within the remote helper, as it was
only enforced at transport selection time.
This patch limits redirects within libcurl to HTTP, HTTPS,
FTP and FTPS. If there is a protocol-whitelist present, this
list is limited to those also allowed by the whitelist. As
redirection happens from within libcurl, it is impossible
for an HTTP redirect to a protocol implemented within
another remote helper.
When the curl version git was compiled with is too old to
support restrictions on protocol redirection, we warn the
user if GIT_ALLOW_PROTOCOL restrictions were requested. This
is a little inaccurate, as even without that variable in the
environment, we would still restrict SFTP, etc, and we do
not warn in that case. But anything else means we would
literally warn every time git accesses an http remote.
This commit includes a test, but it is not as robust as we
would hope. It redirects an http request to ftp, and checks
that curl complained about the protocol, which means that we
are relying on curl's specific error message to know what
happened. Ideally we would redirect to a working ftp server
and confirm that we can clone without protocol restrictions,
and not with them. But we do not have a portable way of
providing an ftp server, nor any other protocol that curl
supports (https is the closest, but we would have to deal
with certificates).
[jk: added test and version warning]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current callers only want to die when their transport is
prohibited. But future callers want to query the mechanism
without dying.
Let's break out a few query functions, and also save the
results in a static list so we don't have to re-parse for
each query.
Based-on-a-patch-by: Blake Burkhart <bburky@bburky.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoctor is stricter than AsciiDoc when deciding if underlining
is a section title or the start of preformatted text. Make the
length of the underlining match the text to ensure that it renders
correctly in all implementations.
Signed-off-by: John Keeping <john@keeping.me.uk>
[jc: squashed in git-bisect one noticed by Michael J Gruber]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
aggregate.perl did not work when Git.pm is not installed to a directory
contained in the default Perl library path list or PERLLIB.
This commit prepends the Perl library path of the current Git source
tree to enable this.
Note that this commit adds a hard-coded relative path
use lib '../../perl/blib/lib';
instead of the flexible environment-based variant
use lib (split(/:/, $ENV{GITPERLLIB}));
which is used in tests written in Perl.
The hard-coded variant is used because the whole performance test
framework does it that way (and GITPERLLIB is not set there).
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The definition of log_div() appended information to the web server's
logfile to make the test more readable. However, log_div() was called
right after a request is served (which is done by git-http-backend);
the web server waits for the git-http-backend process to exit before
it writes to the log file. When the duration between serving a request
and exiting was long, the log_div() output was written before the last
request's log, and the test failed. (This duration could become
especially long for PROFILE=GEN builds.)
To get rid of this behavior, we should not change the logfile at all.
This commit removes log_div() and its calls. The additional information
is kept in the test (for readability reasons) but filtered out before
comparing it to the actual logfile.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After finding some problems (e.g. a ref refs/heads/X points at an
object that is not a commit) and issuing an error message, the
program failed to signal the fact that it found an error by a
non-zero exit status.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some protocols (like git-remote-ext) can execute arbitrary
code found in the URL. The URLs that submodules use may come
from arbitrary sources (e.g., .gitmodules files in a remote
repository). Let's restrict submodules to fetching from a
known-good subset of protocols.
Note that we apply this restriction to all submodule
commands, whether the URL comes from .gitmodules or not.
This is more restrictive than we need to be; for example, in
the tests we run:
git submodule add ext::...
which should be trusted, as the URL comes directly from the
command line provided by the user. But doing it this way is
simpler, and makes it much less likely that we would miss a
case. And since such protocols should be an exception
(especially because nobody who clones from them will be able
to update the submodules!), it's not likely to inconvenience
anyone in practice.
Reported-by: Blake Burkhart <bburky@bburky.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are cloning an untrusted remote repository into a
sandbox, we may also want to fetch remote submodules in
order to get the complete view as intended by the other
side. However, that opens us up to attacks where a malicious
user gets us to clone something they would not otherwise
have access to (this is not necessarily a problem by itself,
but we may then act on the cloned contents in a way that
exposes them to the attacker).
Ideally such a setup would sandbox git entirely away from
high-value items, but this is not always practical or easy
to set up (e.g., OS network controls may block multiple
protocols, and we would want to enable some but not others).
We can help this case by providing a way to restrict
particular protocols. We use a whitelist in the environment.
This is more annoying to set up than a blacklist, but
defaults to safety if the set of protocols git supports
grows). If no whitelist is specified, we continue to default
to allowing all protocols (this is an "unsafe" default, but
since the minority of users will want this sandboxing
effect, it is the only sensible one).
A note on the tests: ideally these would all be in a single
test file, but the git-daemon and httpd test infrastructure
is an all-or-nothing proposition rather than a test-by-test
prerequisite. By putting them all together, we would be
unable to test the file-local code on machines without
apache.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
expand_notes_ref is used by --ref from git-notes(1) and --notes from the
git log to find the full refname of a notes reference. Previously the
documentation of these options was not clear about what sorts of
expansions would be performed. Fix the documentation to clearly and
accurately describe the behavior of the expansions.
Add a test for this expansion when using git notes get-ref in order to
prevent future patches from changing this behavior.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a minor regression brought in to "git send-email" by a recent
addition of the "--smtp-auth" option.
* bn/send-email-smtp-auth-error-message-fix:
send-email: fix uninitialized var warning for $smtp_auth
On the latest version of git-send-email, I see this error just before
running SMTP auth (I didn't provide any --smtp-auth= parameter):
Use of uninitialized value $smtp_auth in pattern match (m//) at \
/home/briannorris/git/git/git-send-email.perl line 1139.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the documentation of commands taking optional arguments in two
ways:
* Documents the behavior of '-O' (for grep) and '-S' (for commands
creating commits) when used without the optional argument.
* Document the syntax of these options.
For the second point, the behavior is documented in gitcli(7), but it is
easy for users to miss, and hard for the same user to understand why e.g.
"git status -u no" does not work.
Document this explicitly in the documentation of each short option having
an optional argument: they are the most error prone since there is no '='
sign between the option and its argument.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the argument of -O, --open-file-in-pager is optional, it must be
stuck to the command. Reflect this in the documentation.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce three i18n improvements from the following commits:
* tag, update-ref: improve description of option "create-reflog"
* pull: don't mark values for option "rebase" for translation
* show-ref: place angle brackets around variables in usage string
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
The branch descriptions that are set with "git branch --edit-description"
option were used in many places but they weren't clearly documented.
* po/doc-branch-desc:
doc: show usage of branch description
The experimental untracked-cache feature were buggy when paths with
a few levels of subdirectories are involved.
* dt/untracked-subdir:
untracked cache: fix entry invalidation
untracked-cache: fix subdirectory handling
t7063: use --force-untracked-cache to speed up a bit
untracked-cache: support sparse checkout
The revision.c options-parser will parse "--first-parent"
for us, but the blame code does not actually respect it, as
we simply iterate over the whole list returned by
first_scapegoat(). We can fix this by returning a
truncated parent list.
Note that we could technically also do so by limiting the
return value of num_scapegoats(), but that is less robust.
We would rely on nobody ever looking at the "next" pointer
from the returned list.
Combining "--reverse" with "--first-parent" is more
complicated, and will probably involve cooperation from
revision.c. Since the desired semantics are not even clear,
let's punt on this for now, but explicitly disallow it to
avoid confusing users (this is not really a regression,
since it did something nonsensical before).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
My 'demon' email address is no longer functional since, after 16+
years with demon, I have had to change my ISP. :(
Also, take the opportunity to remove my middle name, which I only
use on official documents (or in the GECOS field when creating a
user account on unix).
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent versions of scripted "git am" has a performance regression in
"git am --skip" codepath, which no longer exists in the built-in
version on the 'master' front. Fix the regression in the last
scripted version that appear in 2.5.x maintenance track and older.
* js/maint-am-skip-performance-regression:
am --skip/--abort: merge HEAD/ORIG_HEAD tree into index
Both "git show-ref -h" and "git show-ref --help" illustrated that the
"--exclude-existing" option makes the command read list of refs
from its standard input. Change only the "show-ref -h" output to
have a pair of "<>" around the placeholder that designate an input
file, i.e. "git show-ref --exclude-existing < <ref-list>".
* ah/show-ref-usage-string:
show-ref: place angle brackets around variables in usage string
Ensure that when passing a pipe, the gnulib poll replacement will not
return 0 before the timeout has passed.
Not obeying the timeout (and merely returning 0) causes pathological
behavior when preparing a packfile for a repository and taking a
long time to do so. If poll were to return 0 immediately, this would
cause keep-alives to get sent as quickly as possible until the packfile
was created. Such deviance from the standard would cause megabytes (or
more) of keep-alive packets to be sent.
GetTickCount is used as it is efficient, stable and monotonically
increasing. (Neither GetSystemTime nor QueryPerformanceCounter have
all three of these properties.)
Signed-off-by: Edward Thomson <ethomson@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The branch description will be included in 'git format-patch
--cover-letter' and in 'git pull-request' emails. It can also
be used in the automatic merge message. Tell the reader.
While here, clarify that the description may be a multi-line
explanation of the purpose of the branch's patch series.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://ozlabs.org/~paulus/gitk:
gitk: Accelerators for the main menu
gitk: Adjust the menu line numbers to compensate for the new entry
gitk: Add a "Copy commit summary" command
gitk: Update Bulgarian translation (307t)
gitk: Update .po files
gitk: Update Bulgarian translation (304t)
gitk: Use translated version of "Command line" in getcommitlines
gitk: Make it easier to go quickly to a specific commit
gitk: Show the current view's name in the window title
gitk: Add mouse right-click options to copy path and branch name
gitk: Remove mc parameter from proc show_error
gitk: Fix error when changing colors after closing "List references" window
gitk: Replace catch {unset foo} with unset -nocomplain foo
gitk: Rearrange window title to be more conventional
gitk: sv.po: Update Swedish translation (305t0f0u)
gitk: Fix bad English grammar "Matches none Commit Info"
This allows fast, keyboard-only usage of the menu (e.g. Alt+V, N to open a
new view).
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Commit d835dbb9 ("gitk: Add a "Copy commit summary" command",
2015-08-13) in the upstream gitk repo added a new context menu entry.
Therefore, the line numbers of the entries below the new one need to be
adjusted when their text or state is changed.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Don't format the second paragraph as a literal block.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of option "create-reflog" is "create_reflog", which
is neither a good description, nor a sensible string to translate.
Change it to a more meaningful message.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"false|true|preserve" are actual values for option "rebase"
of the "git-pull" command and should therefore not be marked
for translation.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Non-POSIX shells, such as /bin/sh on SunOS, do not support $((...))
arithmetic expansion or $(...) command substitution needed by
generate-cmdlist.sh. Make sure that we use a POSIX compliant shell
$(SHELL_PATH) when running generate-cmdlist.sh.
Signed-off-by: Alejandro R. Sedeño <asedeno@mit.edu>
Acked-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can do this because we have a very simple needs and run "ar"
exactly the same way everywhere ;-).
Requested-by: Jeffrey Walton
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, git-svn parses an authors file using the perl regex
/^(.+?|\(no author\))\s*=\s*(.+?)\s*<(.+)>\s*$/
in order to extract svn user name, real name and e-mail.
This does not match an empty e-mail field like "<>". On the other hand,
the output of an authors-prog is parsed with the perl regex
/^\s*(.+?)\s*<(.*)>\s*$/
in order to extract real name and e-mail.
So, specifying a trivial file grep such as
grep "$1" /tmp/authors | head -n 1 | cut -d'=' -f2 | cut -c'2-'
as the authors prog gives different results compared to specifying
/tmp/authors as the authors file directly.
Instead, make git svn uses the perl regex
/^(.+?|\(no author\))\s*=\s*(.+?)\s*<(.*)>\s*$/
for parsing the authors file so that the same (slightly more lenient)
regex is used in both cases.
Reported-by: Till Schäfer <till2.schaefer@tu-dortmund.de>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
findstring is defined as $(findstring FIND,IN) so if multiple flags are
set these tests do the wrong thing unless $(MAKEFLAGS) is the second
argument.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
f8da6801 (am --skip: support skipping while on unborn branch,
2015-06-06) introduced a performance regression to "git am --skip",
where it used "read-tree" to reconstruct the index from scratch
without reusing the cached stat information.
This is a backport of the corresponding patch to the builtin am in 2.6:
3ecc704 (am --skip/--abort: merge HEAD/ORIG_HEAD tree into index,
2015-08-19).
Reportedly, it can make a huge difference on Windows, in one case a `git
rebase --skip` took 1m40s without, and 5s with, this patch.
cf. https://github.com/git-for-windows/git/issues/365
Reported-and-suggested-by: Kim Gybels <kgybels@infogroep.be>
Acked-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent "git am" had regression when adding a Signed-off-by line
with its "-s" option by an unintended tightening of how an existing
trailer block is detected.
* jc/builtin-am-signoff-regression-fix:
am: match --signoff to the original scripted version
When executing user-specified programs, we generally always
want to use a shell, for flexibility and consistency. One
big exception is executing $GIT_SSH, which for historical
reasons must not use a shell.
Once upon a time the logic in git_connect looked like:
if (protocol == PROTO_SSH) {
... setup ssh ...
} else {
... setup local connection ...
conn->use_shell = 1;
}
But over time the PROTO_SSH block has grown, and the "local"
block has shrunk so that it contains only conn->use_shell;
it's easy to miss at the end of the large block. Moreover,
PROTO_SSH now also sometimes sets use_shell, when the new
GIT_SSH_COMMAND is used.
Let's just set conn->use_shell when we're setting up the "conn"
struct, and unset it (with a comment) in the historical GIT_SSH
case. This will make the flow easier to follow.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus noticed that the recently reimplemented "git am -s" defines
the trailer block too rigidly, resulting in an unnecessary blank
line between the existing sign-offs and his new sign-off. An e-mail
submission sent to Linus in real life ends with mixture of sign-offs
and commentaries, e.g.
title here
message here
Signed-off-by: Original Author <original@auth.or>
[rv: tweaked frotz and nitfol]
Signed-off-by: Re Viewer <rv@ew.er>
Signed-off-by: Other Reviewer <other@rev.ewer>
---
patch here
Because the reimplementation reused append_signoff() helper that is
used by other codepaths, which is unaware that people intermix such
comments with their sign-offs in the trailer block, such a message
was judged to end with a non-trailer, resulting in an extra blank
line before adding a new sign-off.
The original scripted version of "git am" used a lot looser
definition, i.e. "if and only if there is no line that begins with
Signed-off-by:, add a blank line before adding a new sign-off". For
the upcoming release, stop using the append_signoff() in "git am"
and reimplement the looser definition used by the scripted version
to use only in "git am" to fix this regression in "am" while
avoiding new regressions to other users of append_signoff().
In the longer term, we should look into loosening append_signoff()
so that other codepaths that add a new sign-off behave the same way
as "git am -s", but that is a task for post-release.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we "switch" to another local repository to run the server
side of a fetch or push, we must clear the variables in
local_repo_env so that our local $GIT_DIR, etc, do not
pollute the upload-pack or receive-pack that is executing in
the "remote" repository.
We have never done so for ssh connections. For the most
part, nobody has noticed because ssh will not pass unknown
environment variables by default. However, it is not out of
the question for a user to configure ssh to pass along GIT_*
variables using SendEnv/AcceptEnv.
We can demonstrate the problem by using "git -c" on a local
command and seeing its impact on a remote repository. This
config ends up in $GIT_CONFIG_PARAMETERS. In the local case,
the config has no impact, but in the ssh transport, it does
(our test script has a fake ssh that passes through all
environment variables; this isn't normal, but does simulate
one possible setup).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the commit a3da882120 (pager: do wait_for_pager on signal
death), we call wait_for_pager() in the pager's signal handler. The
recent bug report revealed that this causes a deadlock in glibc at
aborting "git log" [*1*]. When this happens, git process is left
unterminated, and it can't be killed by SIGTERM but only by SIGKILL.
The problem is that wait_for_pager() function does more than waiting
for pager process's termination, but it does cleanups and printing
errors. Unfortunately, the functions that may be used in a signal
handler are very limited [*2*]. Particularly, malloc(), free() and the
variants can't be used in a signal handler because they take a mutex
internally in glibc. This was the cause of the deadlock above. Other
than the direct calls of malloc/free, many functions calling
malloc/free can't be used. strerror() is such one, either.
Also the usage of fflush() and printf() in a signal handler is bad,
although it seems working so far. In a safer side, we should avoid
them, too.
This patch tries to reduce the calls of such functions in signal
handlers. wait_for_signal() takes a flag and avoids the unsafe
calls. Also, finish_command_in_signal() is introduced for the
same reason. There the free() calls are removed, and only waits for
the children without whining at errors.
[*1*] https://bugzilla.opensuse.org/show_bug.cgi?id=942297
[*2*] http://pubs.opengroup.org/onlinepubs/9699919799/functions/V2_chap02.html#tag_15_04_03
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we show "branch@{0}", we format into a fixed-size
buffer using sprintf. This can overflow if you have long
branch names. We can fix it by using a temporary strbuf.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function assumes that the relative_base path passed
into it is no larger than PATH_MAX, and writes into a
fixed-size buffer. However, this path may not have actually
come from the filesystem; for example, add_submodule_odb
generates a path using a strbuf and passes it in. This is
hard to trigger in practice, though, because the long
submodule directory would have to exist on disk before we
would try to open its info/alternates file.
We can easily avoid the bug, though, by simply creating the
filename on the heap.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are loading a notes tree into our internal hash
table, we also collect any files that are clearly non-notes.
We format the name of the file into a PATH_MAX buffer, but
unlike true notes (which cannot be larger than a fanned-out
sha1 hash), these tree entries can be arbitrarily long,
overflowing our buffer.
We can fix this by switching to a strbuf. It doesn't even
cost us an extra allocation, as we can simply hand ownership
of the buffer over to the non-note struct.
This is of moderate security interest, as you might fetch
notes trees from an untrusted remote. However, we do not do
so by default, so you would have to manually fetch into the
notes namespace.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When unpack-trees wants to know whether a path will
overwrite anything in the working tree, we use lstat() to
see if there is anything there. But if we are going to write
"foo/bar", we can't just lstat("foo/bar"); we need to look
for leading prefixes (e.g., "foo"). So we use the lstat cache
to find the length of the leading prefix, and copy the
filename up to that length into a temporary buffer (since
the original name is const, we cannot just stick a NUL in
it).
The copy we make goes into a PATH_MAX-sized buffer, which
will overflow if the prefix is longer than PATH_MAX. How
this happens is a little tricky, since in theory PATH_MAX is
the biggest path we will have read from the filesystem. But
this can happen if:
- the compiled-in PATH_MAX does not accurately reflect
what the filesystem is capable of
- the leading prefix is not _quite_ what is on disk; it
contains the next element from the name we are checking.
So if we want to write "aaa/bbb/ccc/ddd" and "aaa/bbb"
exists, the prefix of interest is "aaa/bbb/ccc". If
"aaa/bbb" approaches PATH_MAX, then "ccc" can overflow
it.
So this can be triggered, but it's hard to do. In
particular, you cannot just "git clone" a bogus repo. The
verify_absent checks happen before unpack-trees writes
anything to the filesystem, so there are never any leading
prefixes during the initial checkout, and the bug doesn't
trigger. And by definition, these files are larger than
PATH_MAX, so writing them will fail, and clone will
complain (though it may write a partial path, which will
cause a subsequent "git checkout" to hit the bug).
We can fix it by creating the temporary path on the heap.
The extra malloc overhead is not important, as we are
already making at least one stat() call (and probably more
for the prefix discovery).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git init empty && git -C empty log" said "bad default revision 'HEAD'",
which was found to be a bit confusing to new users.
* jk/log-missing-default-HEAD:
log: diagnose empty HEAD more clearly
The "interpret-trailers" helper mistook a multi-paragraph title of
a commit log message with a colon in it as the end of the trailer
block.
* cc/trailers-corner-case-fix:
trailer: support multiline title
trailer: retitle a test and correct an in-comment message
trailer: ignore first line of message
When re-priming the cache-tree opportunistically while committing
the in-core index as-is, we mistakenly invalidated the in-core
index too aggressively, causing the experimental split-index code
to unnecessarily rewrite the on-disk index file(s).
* dt/commit-preserve-base-index-upon-opportunistic-cache-tree-update:
commit: don't rewrite shared index unnecessarily
"git archive" did not use zip64 extension when creating an archive
with more than 64k entries, which nobody should need, right ;-)?
* rs/archive-zip-many:
archive-zip: support more than 65535 entries
archive-zip: use a local variable to store the creator version
t5004: test ZIP archives with many entries
The code in "multiple-worktree" support that attempted to recover
from an inconsistent state updated an incorrect file.
* nd/fixup-linked-gitdir:
setup: update the right file in multiple checkouts
"git rev-list" does not take "--notes" option, but did not complain
when one is given.
* jk/rev-list-has-no-notes:
rev-list: make it obvious that we do not support notes
Because the configuration system does not allow "alias.0foo" and
"pager.0foo" as the configuration key, the user cannot use '0foo'
as a custom command name anyway, but "git 0foo" tried to look these
keys up and emitted useless warnings before saying '0foo is not a
git command'. These warning messages have been squelched.
* jk/fix-alias-pager-config-key-warnings:
config: silence warnings for command names with invalid keys
t1509 test that requires a dedicated VM environment had some
bitrot, which has been corrected.
* ps/t1509-chroot-test-fixup:
tests: fix cleanup after tests in t1509-root-worktree
tests: fix broken && chains in t1509-root-worktree
strbuf_read() used to have one extra iteration (and an unnecessary
strbuf_grow() of 8kB), which was eliminated.
* jh/strbuf-read-use-read-in-full:
strbuf_read(): skip unnecessary strbuf_grow() at eof
The codepath to produce error messages had a hard-coded limit to
the size of the message, primarily to avoid memory allocation while
calling die().
* jk/long-error-messages:
vreportf: avoid intermediate buffer
vreportf: report to arbitrary filehandles
When trying to see that an object does not exist, a state errno
leaked from our "first try to open a packfile with O_NOATIME and
then if it fails retry without it" logic on a system that refuses
O_NOATIME. This confused us and caused us to die, saying that the
packfile is unreadable, when we should have just reported that the
object does not exist in that packfile to the caller.
* cb/open-noatime-clear-errno:
git_open_noatime: return with errno=0 on success
An off-by-one error made "git remote" to mishandle a remote with a
single letter nickname.
* mh/get-remote-group-fix:
get_remote_group(): use skip_prefix()
get_remote_group(): eliminate superfluous call to strcspn()
get_remote_group(): rename local variable "space" to "wordlen"
get_remote_group(): handle remotes with single-character names
The spec is very inconsistent about which PKT-LINE() parts
of the grammar include a LF. On top of that, the code is not
consistent, either (e.g., send-pack does not put newlines
into the ref-update commands it sends).
Let's make explicit the long-standing expectation that we
generally expect pkt-lines to end in a newline, but that
receivers should be lenient. This makes the spec consistent,
and matches what git already does (though it does not always
fulfill the SHOULD).
We do make an exception for the push-cert, where the
receiving code is currently a bit pickier. This is a
reasonable way to be, as the data needs to be byte-for-byte
compatible with what was signed. We _could_ make up some
rules about signing a canonicalized version including
newlines, but that would require a code change, and is out
of scope for this patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent "git am" introduced a double-locking failure when used with
the "--3way" option that invokes rerere machinery.
* jk/am-rerere-lock-fix:
rerere: release lockfile in non-writing functions
The "interpret-trailers" helper mistook a multi-paragraph title of
a commit log message with a colon in it as the end of the trailer
block.
* cc/trailers-corner-case-fix:
trailer: support multiline title
"git init empty && git -C empty log" said "bad default revision 'HEAD'",
which was found to be a bit confusing to new users.
* jk/log-missing-default-HEAD:
log: diagnose empty HEAD more clearly
A test was designed for "git diff-index --cached -M" but the command is
run without the "-M" option (which makes the test essentially identical
to its preceding counterpart).
Signed-off-by: Matthieu Prat <matthieuprat@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When re-priming the cache-tree opportunistically while committing
the in-core index as-is, we mistakenly invalidated the in-core
index too aggressively, causing the experimental split-index code
to unnecessarily rewrite the on-disk index file(s).
* dt/commit-preserve-base-index-upon-opportunistic-cache-tree-update:
commit: don't rewrite shared index unnecessarily
"git archive" did not use zip64 extension when creating an archive
with more than 64k entries, which nobody should need, right ;-)?
* rs/archive-zip-many:
archive-zip: support more than 65535 entries
archive-zip: use a local variable to store the creator version
t5004: test ZIP archives with many entries
On case insensitive systems, "git p4" did not work well with client
specs.
* ls/p4-fold-case-client-specs:
git-p4: honor core.ignorecase when using P4 client specs
The code in "multiple-worktree" support that attempted to recover
from an inconsistent state updated an incorrect file.
* nd/fixup-linked-gitdir:
setup: update the right file in multiple checkouts
There's a bug in builtin/am.c in which we take a lock on
MERGE_RR recursively. But rather than fix am.c, this patch
fixes the confusing interface from rerere.c that caused the
bug. Read on for the gory details.
The setup_rerere() function both reads the existing MERGE_RR
file, and takes MERGE_RR.lock. In the rerere() and
rerere_forget() functions, we end up in write_rr(), which
will then commit the lock file.
But for functions like rerere_clear() that do not write to
MERGE_RR, we expect the caller to have handled
setup_rerere(). That caller would then need to release the
lockfile, but it can't; the lock struct is local to
rerere.c.
For builtin/rerere.c, this is OK. We run a single rerere
operation and then exit immediately, which has the side
effect of rolling back the lockfile.
But in builtin/am.c, this is actively wrong. If we run "git
am -3 --skip", we call setup-rerere twice without releasing
the lock:
1. The "--skip" causes us to call am_rerere_clear(), which
calls setup_rerere(), but never drops the lock.
2. We then proceed to the next patch.
3. The "--3way" may cause us to call rerere() to handle
conflicts in that patch, but we are already holding the
lock. The lockfile code dies with:
BUG: prepare_tempfile_object called for active object
We could fix this by having rerere_clear() call
rollback_lock_file(). But it feels a bit odd for it to roll
back a lockfile that it did not itself take. So let's
simplify the interface further, and handle setup_rerere in
the function itself, taking away the question from the
caller over whether they need to do so.
We can give rerere_gc() the same treatment, as well (even
though it doesn't have any callers besides builtin/rerere.c
at this point). Note that these functions don't take flags
from their callers to pass along to setup_rerere; that's OK,
because the flags would not be meaningful for what they are
doing.
Both of those functions need to hold the lock because even
though they do not write to MERGE_RR, they are still writing
and should be protected from a simultaneous "rerere" run.
But rerere_remaining(), "rerere diff", and "rerere status"
are all read-only operations. They want to setup_rerere(),
but do not care about taking the lock in the first place.
Since our update of MERGE_RR is the usual atomic rename done
by commit_lock_file, they can just do a lockless read. For
that, we teach setup_rerere a READONLY flag to avoid the
lock.
As a bonus, this pushes builtin/rerere.c's setup_rerere call
closer to the functions that use it. Which means that "git
rerere totally-bogus-command" will no longer silently
exit(0) in a repository without rerere enabled.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git describe" without argument defaulted to describe the HEAD
commit, but "git describe --contains" didn't. Arguably, in a
repository used for active development, such defaulting would not
be very useful as the tip of branch is typically not tagged, but it
is better to be consistent.
* sg/describe-contains:
describe --contains: default to HEAD when no commit-ish is given
The client side codepaths in "git push" have been cleaned up
and the user can request to perform an optional "signed push",
i.e. sign only when the other end accepts signed push.
* db/push-sign-if-asked:
push: add a config option push.gpgSign for default signed pushes
push: support signing pushes iff the server supports it
builtin/send-pack.c: use parse_options API
config.c: rename git_config_maybe_bool_text and export it as git_parse_maybe_bool
transport: remove git_transport_options.push_cert
gitremote-helpers.txt: document pushcert option
Documentation/git-send-pack.txt: document --signed
Documentation/git-send-pack.txt: wrap long synopsis line
Documentation/git-push.txt: document when --signed may fail
"git notes merge" can be told with "--strategy=<how>" option how to
automatically handle conflicts; this can now be configured by
setting notes.mergeStrategy configuration variable.
* jk/notes-merge-config:
notes: teach git-notes about notes.<name>.mergeStrategy option
notes: add notes.mergeStrategy option to select default strategy
notes: add tests for --commit/--abort/--strategy exclusivity
notes: extract parse_notes_merge_strategy to notes-utils
notes: extract enum notes_merge_strategy to notes-utils.h
notes: document cat_sort_uniq rewriteMode
Recent reimplementation of "git am" changed the format of state
files kept in $GIT_DIR/rebase-apply/ without meaning to do so,
primarily because write_file() API was cumbersome to use and it was
easy to mistakenly make text files with incomplete lines. Update
write_file() interface to make it harder to misuse.
* jc/am-state-fix:
write_file(): drop caller-supplied LF from calls to create a one-liner file
write_file_v(): do not leave incomplete line at the end
write_file(): drop "fatal" parameter
builtin/am: make sure state files are text
builtin/am: introduce write_state_*() helper functions
"git log --cc" did not show any patch, even though most of the time
the user meant "git log --cc -p -m" to see patch output for commits
with a single parent, and combined diff for merge commits. The
command is taught to DWIM "--cc" (without "--raw" and other forms
of output specification) to "--cc -p -m".
* jc/log-p-cc:
builtin/log.c: minor reformat
log: show merge commit when --cc is given
log: when --cc is given, default to -p unless told otherwise
log: rename "tweak" helpers
Because the configuration system does not allow "alias.0foo" and
"pager.0foo" as the configuration key, the user cannot use '0foo'
as a custom command name anyway, but "git 0foo" tried to look these
keys up and emitted useless warnings before saying '0foo is not a
git command'. These warning messages have been squelched.
* jk/fix-alias-pager-config-key-warnings:
config: silence warnings for command names with invalid keys
"git rev-list" does not take "--notes" option, but did not complain
when one is given.
* jk/rev-list-has-no-notes:
rev-list: make it obvious that we do not support notes
The gitmodules API accessed from the C code learned to cache stuff
lazily.
* hv/submodule-config:
submodule: allow erroneous values for the fetchRecurseSubmodules option
submodule: use new config API for worktree configurations
submodule: extract functions for config set and lookup
submodule: implement a config API for lookup of .gitmodules values
"git config --list" output was hard to parse when values consist of
multiple lines. "--name-only" option is added to help this.
* sg/config-name-only:
get_urlmatch: avoid useless strbuf write
format_config: simplify buffer handling
format_config: don't init strbuf
config: restructure format_config() for better control flow
completion: list variable names reliably with 'git config --name-only'
config: add '--name-only' option to list only variable names
We currently ignore the first line passed to `git interpret-trailers`,
when looking for the beginning of the trailers.
Unfortunately this does not work well when a commit is created with a
line break in the title, using for example the following command:
git commit -m 'place of
code: change we made'
That's why instead of ignoring only the first line, it is better to
ignore the first paragraph.
Signed-off-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we are here, remove some boilerplate by using test_commit.
Signed-off-by: Erik Elfström <erik.elfstrom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you init or clone an empty repository, the initial
message from running "git log" is not very friendly:
$ git init
Initialized empty Git repository in /home/peff/foo/.git/
$ git log
fatal: bad default revision 'HEAD'
Let's detect this situation and write a more friendly
message:
$ git log
fatal: your current branch 'master' does not have any commits yet
We also detect the case that 'HEAD' points to a broken ref;
this should be even less common, but is easy to see. Note
that we do not diagnose all possible cases. We rely on
resolve_ref, which means we do not get information about
complex cases. E.g., "--default master" would use dwim_ref
to find "refs/heads/master", but we notice only that
"master" does not exist. Similarly, a complex sha1
expression like "--default HEAD^2" will not resolve as a
ref.
But that's OK. We fall back to a generic error message in
those cases, and they are unlikely to be used anyway.
Catching an empty or broken "HEAD" improves the common case,
and the other cases are not regressed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a cache invalidation which would cause the shared index to be
rewritten on as-is commits.
When the cache-tree has changed, we need to update it. But we don't
necessarily need to update the shared index. So setting
active_cache_changed to SOMETHING_CHANGED is unnecessary. Instead, we
let update_main_cache_tree just update the CACHE_TREE_CHANGED bit.
In order to test this, make test-dump-split-index not segfault on
missing replace_bitmap/delete_bitmap. This new codepath is not called
now that the test passes, but is necessary to avoid a segfault when the
new test is run with the old builtin/commit.c code.
Signed-off-by: David Turner <dturner@twopensource.com>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"interpret-trailers" helper mistook a single-liner log message that
has a colon as the end of existing trailer.
* cc/trailers-corner-case-fix:
trailer: retitle a test and correct an in-comment message
trailer: ignore first line of message
The experimental untracked-cache feature were buggy when paths with
a few levels of subdirectories are involved.
* dt/untracked-subdir:
untracked cache: fix entry invalidation
untracked-cache: fix subdirectory handling
-u and -i can only be given if -m, --reset, or --prefix is given.
Without parentheses, it looks like -u and -i can be used no matter
what, and the second pair of brackets is confusing.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With 77b9b1d (add_to_alternates_file: don't add duplicate entries,
2015-08-10) the last caller of function "hold_lock_file_for_append"
has been removed, so we can remove the function as well.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to open and test the second end of the pipe clearly imitates
the code for the first end. A little too closely, though... Let's fix
the obvious copy-edit bug.
Signed-off-by: Jose F. Morales <jfmcjf@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perforce depot may record paths in mixed cases, e.g. "p4 files" may
show that there are these two paths:
//depot/Path/to/file1
//depot/pATH/to/file2
and with "p4" or "p4v", these end up in the same directory, e.g.
//depot/Path/to/file1
//depot/Path/to/file2
which is the desired outcome on case insensitive systems.
If git-p4 is used with client spec "//depot/Path/...", however, then
all files not matching the case in the client spec are ignored (in
the example above "//depot/pATH/to/file2").
Fix this by using the path case that appears first in lexicographical
order when core.ignorecase is set to true. This behavior is consistent
with "p4" and "p4v".
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message can be seen by running
`git config gc.reflogexpire foo` and then `git reflog expire`.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support more than 65535 entries cleanly by writing a "zip64 end of
central directory record" (with a 64-bit field for the number of
entries) before the usual "end of central directory record" (which
contains only a 16-bit field). InfoZIP's zip does the same.
Archives with 65535 or less entries are not affected.
Programs that extract all files like InfoZIP's zip and 7-Zip
ignored the field and could extract all files already. Software
that relies on the ZIP file directory to show a list of contained
files quickly to simulate to normal directory like Windows'
built-in ZIP functionality only saw a subset of the included files.
Windows supports ZIP64 since Vista according to
https://en.wikipedia.org/wiki/Zip_%28file_format%29#ZIP64.
Suggested-by: Johannes Schauer <josch@debian.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a simpler conditional right next to the code which makes a higher
creator version necessary -- namely symlink handling and support for
executable files -- instead of a long line with a ternary operator.
The resulting code has more lines but is simpler and allows reuse of
the value easily.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A ZIP file directory has a 16-bit field for the number of entries it
contains. There are 64-bit extensions to deal with that. Demonstrate
that git archive --format=zip currently doesn't use them and instead
overflows the field.
InfoZIP's unzip doesn't care about this field and extracts all files
anyway. Software that uses the directory for presenting a filesystem
like view quickly -- notably Windows -- depends on it, but doesn't
lend itself to an automatic test case easily. Use InfoZIP's zipinfo,
which probably isn't available everywhere but at least can provides
*some* way to check this field.
To speed things up a bit create and commit only a subset of the files
and build a fake tree out of duplicates and pass that to git archive.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git am" that was recently reimplemented in C had a performance
regression in "git am --abort" that goes back to the version before
an attempted (and failed) patch application.
* pt/am-builtin-abort-fix:
am --skip/--abort: merge HEAD/ORIG_HEAD tree into index
"git send-email" learned a new option --smtp-auth to limit the SMTP
AUTH mechanisms to be used to a subset of what the system library
supports.
* jv/send-email-selective-smtp-auth:
send-email: provide whitelist of SMTP AUTH mechanisms
A new configuration variable http.sslVersion can be used to specify
what specific version of SSL/TLS to use to make a connection.
* ep/http-configure-ssl-version:
http: add support for specifying the SSL version
Mention the configuration variable in a way similar to how
"svn-remote.<name>.ignore-paths" is mentioned.
Signed-off-by: Brett Randall <javabrett@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone $URL" in recent releases of Git contains a regression in
the code that invents a new repository name incorrectly based on
the $URL. This has been corrected.
* jk/guess-repo-name-regression-fix:
clone: use computed length in guess_dir_name
clone: add tests for output directory
Running tests with the "-x" option to make them verbose had some
unpleasant interactions with other features of the test suite.
* jk/test-with-x:
test-lib: disable trace when test is not verbose
test-lib: turn off "-x" tracing during chain-lint check
"git pull" in recent releases of Git has a regression in the code
that allows custom path to the --upload-pack=<program>. This has
been corrected.
Note that this is irrelevant for 'master' with "git pull" rewritten
in C.
* mm/pull-upload-pack:
pull: pass upload_pack only when it was given
pull.sh: quote $upload_pack when passing it to git-fetch
The upload_pack shell variable is initialized to an empty string, so
conditional expansion with ${upload_pack+"$upload_pack"} would not
work very well. You need a colon there.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to see that an object does not exist, a state errno
leaked from our "first try to open a packfile with O_NOATIME and
then if it fails retry without it" logic on a system that refuses
O_NOATIME. This confused us and caused us to die, saying that the
packfile is unreadable, when we should have just reported that the
object does not exist in that packfile to the caller.
* cb/open-noatime-clear-errno:
git_open_noatime: return with errno=0 on success
The "lockfile" API has been rebuilt on top of a new "tempfile" API.
* mh/tempfile:
credential-cache--daemon: use tempfile module
credential-cache--daemon: delete socket from main()
gc: use tempfile module to handle gc.pid file
lock_repo_for_gc(): compute the path to "gc.pid" only once
diff: use tempfile module
setup_temporary_shallow(): use tempfile module
write_shared_index(): use tempfile module
register_tempfile(): new function to handle an existing temporary file
tempfile: add several functions for creating temporary files
prepare_tempfile_object(): new function, extracted from create_tempfile()
tempfile: a new module for handling temporary files
commit_lock_file(): use get_locked_file_path()
lockfile: add accessor get_lock_file_path()
lockfile: add accessors get_lock_file_fd() and get_lock_file_fp()
create_bundle(): duplicate file descriptor to avoid closing it twice
lockfile: move documentation to lockfile.h and lockfile.c
After "git am --opt1" stops, running "git am --opt2" pays attention
to "--opt2" only for the patch that caused the original invocation
to stop.
* pt/am-builtin-options:
am: let --signoff override --no-signoff
am: let command-line options override saved options
test_terminal: redirect child process' stdin to a pty
To prepare for allowing a different "ref" backend to be plugged in
to the system, update_ref()/delete_ref() have been taught about
ref-like things like MERGE_HEAD that are per-worktree (they will
always be written to the filesystem inside $GIT_DIR).
* dt/refs-pseudo:
pseudoref: check return values from read_ref()
sequencer: replace write_cherry_pick_head with update_ref
bisect: use update_ref
pseudorefs: create and use pseudoref update and delete functions
refs: add ref_type function
refs: introduce pseudoref and per-worktree ref concepts
When linked worktree is used, simultaneous "notes merge" instances
for the same ref in refs/notes/* are prevented from stomping on
each other.
* dt/notes-multiple:
notes: handle multiple worktrees
worktrees: add find_shared_symref
The codepath to produce error messages had a hard-coded limit to
the size of the message, primarily to avoid memory allocation while
calling die().
* jk/long-error-messages:
vreportf: avoid intermediate buffer
vreportf: report to arbitrary filehandles
strbuf_read() used to have one extra iteration (and an unnecessary
strbuf_grow() of 8kB), which was eliminated.
* jh/strbuf-read-use-read-in-full:
strbuf_read(): skip unnecessary strbuf_grow() at eof
All of the callsites covered by this change call write_file() or
write_file_gently() to create a one-liner file. Drop the caller
supplied LF and let these callees to append it as necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All existing callers to this function use it to produce a text file
or an empty file, and a new callsite that mimick them must end their
payload with a LF. If they forget to do so, the resulting file will
end with an incomplete line.
Teach write_file_v() to complete the incomplete line, if exists, so
that the callers do not have to.
With this, the caller-side fix in builtin/am.c becomes unnecessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
527ec39 (generate-cmdlist: parse common group commands, 2015-05-21)
replaced generate-cmdlist.sh with a more functional Perl version,
generate-cmdlist.perl. The Perl version gleans named tags from a new
"common groups" section in command-list.txt and recognizes those
tags in "command list" section entries in place of the old 'common'
tag. This allows git-help to, not only recognize, but also group
common commands.
Although the tests require Perl, 527ec39 creates an unconditional
dependence upon Perl in the build system itself, which can not be
overridden with NO_PERL. Such a dependency may be undesirable; for
instance, the 'git-lite' package in the FreeBSD ports tree is
intended as a minimal Git installation (which may, for example, be
useful on servers needing only local clone and update capability),
which, historically, has not depended upon Perl[1].
Therefore, revive generate-cmdlist.sh and extend it to recognize
"common groups" and its named tags. Retire generate-cmdlist.perl.
[1]: http://thread.gmane.org/gmane.comp.version-control.git/275905/focus=276132
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code is introduced in 23af91d (prune: strategies for linked
checkouts - 2014-11-30), and it's supposed to implement this rule from
that commit's message:
- linked checkouts are supposed to keep its location in $R/gitdir up
to date. The use case is auto fixup after a manual checkout move.
Note the name, "$R/gitdir", not "$R/gitfile". Correct the path to be
updated accordingly.
While at there, make sure I/O errors are not silently dropped.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git describe --contains' doesn't default to HEAD when no commit is
given, and it doesn't produce any output, not even an error:
~/src/git ((v2.5.0))$ ./git describe --contains
~/src/git ((v2.5.0))$ ./git describe --contains HEAD
v2.5.0^0
Unlike other 'git describe' options, the '--contains' code path is
implemented by calling 'name-rev' with a bunch of options plus all the
commit-ishes that were passed to 'git describe'. If no commit-ish was
present, then 'name-rev' got invoked with none, which then leads to the
behavior illustrated above.
Porcelain commands usually default to HEAD when no commit-ish is given,
and 'git describe' already does so in all other cases, so it should do
so with '--contains' as well.
Pass HEAD to 'name-rev' when no commit-ish is given on the command line
to make '--contains' behave consistently with other 'git describe'
options. While at it, use argv_array_pushv() instead of the loop to
pass commit-ishes to 'git name-rev'.
'git describe's short help already indicates that the commit-ish is
optional, but the synopsis in the man page doesn't, so update it
accordingly as well.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All callers except three passed 1 for the "fatal" parameter to ask
this function to die upon error, but to a casual reader of the code,
it was not all obvious what that 1 meant. Instead, split the
function into two based on a common write_file_v() that takes the
flag, introduce write_file_gently() as a new way to attempt creating
a file without dying on error, and make three callers to call it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We forgot to terminate the payload given to write_file() with LF,
resulting in files that end with an incomplete line. Teach the
wrappers builtin/am uses to make sure it adds LF at the end as
necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many calls to write_file() that repeat the same pattern in
the implementation of the builtin version of "am". They all share
the same traits, i.e they
- produce a text file with a single string in it;
- have enough information to produce the entire contents of that
file;
- generate the pathname of the file by making a call to am_path(); and
- they ask write_file() to die() upon failure.
The slight differences among the call sites throw them into roughly
three categories:
- many write either "t" or "f" based on a boolean value to a file;
- some write the integer value in decimal text;
- some others write more general string, e.g. an object name in
hex, an empty string (i.e. the presense of the file itself serves
as a flag), etc.
Introduce three helpers, write_state_bool(), write_state_count() and
write_state_text(), to reduce direct calls to write_file().
This is a preparatory step for the next step to ensure that no
"state" file this command leaves in $GIT_DIR is with an incomplete
line at the end.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rev-list command does not have the internal
infrastructure to display notes. Running:
git rev-list --notes HEAD
will silently ignore the "--notes" option. Running:
git rev-list --notes --grep=. HEAD
will crash on an assert. Running:
git rev-list --format=%N HEAD
will place a literal "%N" in the output (it does not even
expand to an empty string).
Let's have rev-list tell the user that it cannot fill the
user's request, rather than silently producing wrong data.
Likewise, let's remove mention of the notes options from the
rev-list documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are running the git command "foo", we may have to
look up the config keys "pager.foo" and "alias.foo". These
config schemes are mis-designed, as the command names can be
anything, but the config syntax has some restrictions. For
example:
$ git foo_bar
error: invalid key: pager.foo_bar
error: invalid key: alias.foo_bar
git: 'foo_bar' is not a git command. See 'git --help'.
You cannot name an alias with an underscore. And if you have
an external command with one, you cannot configure its
pager.
In the long run, we may develop a different config scheme
for these features. But in the near term (and because we'll
need to support the existing scheme indefinitely), we should
at least squelch the error messages shown above.
These errors come from git_config_parse_key. Ideally we
would pass a "quiet" flag to the config machinery, but there
are many layers between the pager code and the key parsing.
Passing a flag through all of those would be an invasive
change.
Instead, let's provide a config function to report on
whether a key is syntactically valid, and have the pager and
alias code skip lookup for bogus keys. We can build this
easily around the existing git_config_parse_key, with two
minor modifications:
1. We now handle a NULL store_key, to validate but not
write out the normalized key.
2. We accept a "quiet" flag to avoid writing to stderr.
This doesn't need to be a full-blown public "flags"
field, because we can make the existing implementation
a static helper function, keeping the mess contained
inside config.c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove "复刻" from translation option list of "fork", keeping "派生"
as the only one.
In Git context, by talking about the term "fork", one usually mean the
procedure that divides a branch into two or more history lines. That
is quite like the "fork" concept in programming, which split a process
into two or more independent processes.
On the other hand, "复刻" by itself means "copy" or "mirror". It is
considered more suitable for describing the procedure like
"fork a repository", which is common on public repository hosting
services, such as GitHub. However, this is beyond the scope of
core-Git. As a l10n work for core-Git, "复刻" should be removed here.
There used to be another option - "分岔". Its a good idea to
translate "fork point" as "分岔点". However, "派生点" is as good,
too. So this option is finally discarded.
Also fix a relevant translation issue which was introduced in
`160fb2b`.
Signed-off-by: Ray Chen <oldsharp@gmail.com>
"dumb/smart HTTP protocol" are normally considered as phrases.
Add "protocol" as a suffix after them makes more sense.
Signed-off-by: Ray Chen <oldsharp@gmail.com>
It's quite common to see the term "SHA-1" remain untranslated in many
l10n works. So update the "SHA-1" entry in Git glossary to match this
behavior.
Signed-off-by: Ray Chen <oldsharp@gmail.com>
The declaration of 'struct wt_status' requires the declararion of 'struct
pathspec'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When looking for the start of the trailers in the message
we are passed, we should ignore the first line of the message.
The reason is that if we are passed a patch or commit message
then the first line should be the patch title.
If we are passed only trailers we can expect that they start
with an empty line that can be ignored too.
This way we can properly process commit messages that have
only one line with something that looks like a trailer, for
example like "area of code: change we made".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change <ref> to <pattern> in the description of
gc.*.reflogExpireUnreachable, since that is what the text refers to.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We defaulted to ignoring merge diffs because long long ago, in a
galaxy far away, we didn't have a great way to show the diffs. The
whole "--cc" option goes back to January '06 and commit d8f4790e6f
("diff-tree --cc: denser combined diff output for a merge commit").
And before that option - so for about 8 months - we had no good way
to show the diffs of merges in a good dense way. So the whole
"don't show diffs for merges by default" actually made a lot of
sense originally, because our merge diffs were not very useful.
And this was carried forward to this day. "git log --cc" still
ignores merge commits, and you need to say "git log -m --cc" to view
a sensible rendition of merge and non-merge commits, even with the
previous change to make "--cc" imply "-p".
Teach "git log" that "--cc" means the user wants to see interesting
changes in merge commits by turning "-m" on.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--cc" option to "git log" is clearly a request to show some
sort of combined diff (be it --patch or --raw), but traditionally
we required the command line to explicitly ask for "git log -p --cc".
Teach the command line parser to treat a lone "--cc" as if the user
specified "-p --cc". Formats that do ask for other forms of diff
output, e.g. "log --raw --cc", are not overriden.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The revision walking API allows the callers to tweak its
configuration at the last minute, immediately after all the revision
and pathspec parameters are parsed from the command line but before
the default actions are decided based on them, by defining a "tweak"
callback function when calling setup_revisions(). Traditionally,
this facility was used by "git show" to turn on the patch output
"-p" by default when no diff output option (e.g. "--raw" or "-s" to
squelch the output altogether) is given on the command line, and
further give dense combined diffs "--cc" for merge commits when no
option to countermand it (e.g. "-m" to show pairwise patches).
Recently, "git log" started using the same facility, but we named
the callback function "default_follow_tweak()", as if the only kind
of tweaking we would want for "git log" will forever be limited to
turning "--follow" on by default when told by a configuration
variable. That was myopic.
Rename it to more generic name "log_setup_revisions_tweak()", and
match the one used by show "show_setup_revisions_tweak()".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We create a strbuf only to insert a single string, pass the
resulting buffer to a function (which does not modify the
string), and then free it. We can just pass the original
string instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When formatting a config value into a strbuf, we may end
up stringifying it into a fixed-size buffer using sprintf,
and then copying that buffer into the strbuf. We can
eliminate the middle-man (and drop some calls to sprintf!)
by writing directly to the strbuf.
The reason it was written this way in the first place is
that we need to know before writing the value whether to
insert a delimiter. Instead of delaying the write of the
value, we speculatively write the delimiter, and roll it
back in the single case that cares.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's unusual for a function which writes to a passed-in
strbuf to call strbuf_init; that will throw away anything
already there, leaking memory. In this case, there are
exactly two callers; one relies on this initialization and
the other passes in an already-initialized buffer.
There's no leak, as the initialized buffer doesn't have
anything in it. But let's bump the strbuf_init out to the
one caller who needs it, making format_config more
idiomatic.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 578625fa91 (config: add '--name-only' option to list only
variable names, 2015-08-10) modified format_config() such that it
returned from the middle of the function when showing only keys,
resulting in ugly code structure.
Reorganize the if statements and dealing with the key-value delimiter to
make the function easier to read.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though multiplication is commutative, the order of arguments
should be xcalloc(nmemb, size). ps_matched is an array of 1-byte
element whose size is the same as the number of pathspec elements.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command-line completion script (in contrib/) has been updated.
* tb/complete-rebase-i-edit-todo:
completion: offer '--edit-todo' during interactive rebase
git_path() and mkpath() are handy helper functions but it is easy
to misuse, as the callers need to be careful to keep the number of
active results below 4. Their uses have been reduced.
* jk/git-path:
memoize common git-path "constant" files
get_repo_path: refactor path-allocation
find_hook: keep our own static buffer
refs.c: remove_empty_directories can take a strbuf
refs.c: avoid git_path assignment in lock_ref_sha1_basic
refs.c: avoid repeated git_path calls in rename_tmp_log
refs.c: simplify strbufs in reflog setup and writing
path.c: drop git_path_submodule
refs.c: remove extra git_path calls from read_loose_refs
remote.c: drop extraneous local variable from migrate_file
prefer mkpathdup to mkpath in assignments
prefer git_pathdup to git_path in some possibly-dangerous cases
add_to_alternates_file: don't add duplicate entries
t5700: modernize style
cache.h: complete set of git_path_submodule helpers
cache.h: clarify documentation for git_path, et al
"git clone $URL", when cloning from a site whose sole purpose is to
host a single repository (hence, no path after <scheme>://<site>/),
tried to use the site name as the new repository name, but did not
remove username or password when <site> part was of the form
<user>@<pass>:<host>. The code is taught to redact these.
* ps/guess-repo-name-at-root:
clone: abort if no dir name could be guessed
clone: do not use port number as dir name
clone: do not include authentication data in guessed dir
"git clone $URL" in recent releases of Git contains a regression in
the code that invents a new repository name incorrectly based on
the $URL. This has been corrected.
* jk/guess-repo-name-regression-fix:
clone: use computed length in guess_dir_name
clone: add tests for output directory
A negative !ref entry in multi-value transfer.hideRefs
configuration can be used to say "don't hide this one".
* jk/negative-hiderefs:
refs: support negative transfer.hideRefs
docs/config.txt: reorder hideRefs config
Running tests with the "-x" option to make them verbose had some
unpleasant interactions with other features of the test suite.
* jk/test-with-x:
test-lib: disable trace when test is not verbose
test-lib: turn off "-x" tracing during chain-lint check
t1509 test that requires a dedicated VM environment had some
bitrot, which has been corrected.
* ps/t1509-chroot-test-fixup:
tests: fix cleanup after tests in t1509-root-worktree
tests: fix broken && chains in t1509-root-worktree
"git pull" in recent releases of Git has a regression in the code
that allows custom path to the --upload-pack=<program>. This has
been corrected.
Note that this is irrelevant for 'master' with "git pull" rewritten
in C.
* mm/pull-upload-pack:
pull.sh: quote $upload_pack when passing it to git-fetch
* es/doc-clean-outdated-tools:
Documentation/git-tools: retire manually-maintained list
Documentation/git-tools: drop references to defunct tools
Documentation/git-tools: fix item text formatting
Documentation/git-tools: improve discoverability of Git wiki
Documentation/git: drop outdated Cogito reference
Running an aliased command from a subdirectory when the .git thing
in the working tree is a gitfile pointing elsewhere did not work.
* nd/export-worktree:
setup: set env $GIT_WORK_TREE when work tree is set, like $GIT_DIR
Often a fast-import stream builds a new commit on top of the
previous commit it built, and it often unconditionally emits a
"from" command to specify the first parent, which can be omitted in
such a case. This caused fast-import to forget the tree of the
previous commit and then re-read it from scratch, which was
inefficient. Optimize for this common case.
* mh/fast-import-optimize-current-from:
fast-import: do less work when given "from" matches current branch head
The "rev-parse --parseopt" mode parsed the option specification
and the argument hint in a strange way to allow '=' and other
special characters in the option name while forbidding them from
the argument hint. This made it impossible to define an option
like "--pair <key>=<value>" with "pair=key=value" specification,
which instead would have defined a "--pair=key <value>" option.
* ib/scripted-parse-opt-better-hint-string:
rev-parse --parseopt: allow [*=?!] in argument hints
A "rebase" replays changes of the local branch on top of something
else, as such they are placed in stage #3 and referred to as
"theirs", while the changes in the new base, typically a foreign
work, are placed in stage #2 and referred to as "ours". Clarify
the "checkout --ours/--theirs".
* se/doc-checkout-ours-theirs:
checkout: document subtlety around --ours/--theirs
An experimental "untracked cache" feature used uname(2) in a
slightly unportable way.
* cb/uname-in-untracked:
untracked: fix detection of uname(2) failure
"sparse checkout" misbehaved for a path that is excluded from the
checkout when switching between branches that differ at the path.
* as/sparse-checkout-removal:
unpack-trees: don't update files with CE_WT_REMOVE set
The low-level "git send-pack" did not honor 'user.signingkey'
configuration variable when sending a signed-push.
* db/send-pack-user-signingkey:
builtin/send-pack.c: respect user.signingkey
An attempt to delete a ref by pushing into a repositorywhose HEAD
symbolic reference points at an unborn branch that cannot be
created due to ref D/F conflict (e.g. refs/heads/a/b exists, HEAD
points at refs/heads/a) failed.
* jx/do-not-crash-receive-pack-wo-head:
receive-pack: crash when checking with non-exist HEAD
"git subtree" (in contrib/) depended on "git log" output to be
stable, which was a no-no. Apply a workaround to force a
particular date format.
* da/subtree-date-confusion:
contrib/subtree: ignore log.date configuration
Add a new flag --sign=true (or --sign=false), which means the same
thing as the original --signed (or --no-signed). Give it a third
value --sign=if-asked to tell push and send-pack to send a push
certificate if and only if the server advertised a push cert nonce.
If not, warn the user that their push may not be as secure as they
thought.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old option parsing code in this plumbing command predates this
API, so option parsing was done more manually. Using the new API
brings send-pack more in line with push, and accepts new variants
like --no-* for negating options.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helper function does not complain about the config variable
but just silently reports failure to the caller. It is useful for
callers that need to parse any string that could be boolean or other
string (e.g. tristate yes/no/auto).
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This field was set in transport_set_option, but never read in the push
code. The push code basically ignores the smart_options field
entirely, and derives its options from the flags arguments to the
push* callbacks. Note that in git_transport_push there are already
several args set from flags that have no corresponding field in
git_transport_options; after this change, push_cert is just like
those.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like --atomic, --signed will fail if the server does not advertise the
necessary capability. In addition, it requires gpg on the client side.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We should not die when reading the submodule config cache since the
user might not be able to get out of that situation when the
configuration is part of the history.
We should handle this condition later when the value is about to be
used.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We remove the extracted functions and directly parse into and read out
of the cache. This allows us to have one unified way of accessing
submodule configuration values specific to single submodules. Regardless
whether we need to access a configuration from history or from the
worktree.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one step towards using the new configuration API. We just
extract these functions to make replacing the actual code easier.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a superproject some commands need to interact with submodules. They
need to query values from the .gitmodules file either from the worktree
of from certain revisions. At the moment this is quite hard since a
caller would need to read the .gitmodules file from the history and then
parse the values. We want to provide an API for this so we have one
place to get values from .gitmodules from any revision (including the
worktree).
The API is realized as a cache which allows us to lazily read
.gitmodules configurations by commit into a runtime cache which can then
be used to easily lookup values from it. Currently only the values for
path or name are stored but it can be extended for any value needed.
It is expected that .gitmodules files do not change often between
commits. Thats why we lookup the .gitmodules sha1 from a commit and then
either lookup an already parsed configuration or parse and cache an
unknown one for each sha1. The cache is lazily build on demand for each
requested commit.
This cache can be used for all purposes which need knowledge about
submodule configurations. Example use cases are:
* Recursive submodule checkout needs to lookup a submodule name from
its path when a submodule first appears. This needs be done before
this configuration exists in the worktree.
* The implementation of submodule support for 'git archive' needs to
lookup the submodule name to generate the archive when given a
revision that is not checked out.
* 'git fetch' when given the --recurse-submodules=on-demand option (or
configuration) needs to lookup submodule names by path from the
database rather than reading from the worktree. For new submodule it
needs to lookup the name from its path to allow cloning new
submodules into the .git folder so they can be checked out without
any network interaction when the user does a checkout of that
revision.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After running "git am --abort", and then running "git reset --hard",
files that were not modified would still be re-checked out.
This is because clean_index() in builtin/am.c mistakenly called the
read_tree() function, which overwrites all entries in the index,
including the stat info.
"git am --skip" did not seem to have this issue because am_skip() called
am_run(), which called refresh_cache() to update the stat info. However,
there's still a performance penalty as the lack of stat info meant that
refresh_cache() would have to scan all files for changes.
Fix this by using unpack_trees() instead to merge the tree into the
index, so that the stat info from the index is kept.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
First, the current code in untracked_cache_invalidate_path() is wrong
because it can only handle paths "a" or "a/b", not "a/b/c" because
lookup_untracked() only looks for entries directly under the given
directory. In the last case, it will look for the entry "b/c" in
directory "a" instead. This means if you delete or add an entry in a
subdirectory, untracked cache may become out of date because it does not
invalidate properly. This is noticed by David Turner.
The second problem is about invalidation inside a fully untracked/excluded
directory. In this case we may have to invalidate back to root. See the
comment block for detail.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, some calls lookup_untracked would pass a full path. But
lookup_untracked assumes that the portion of the path up to and
including to the untracked_cache_dir has been removed. So
lookup_untracked would be looking in the untracked_cache for 'foo' for
'foo/bar' (instead of just looking for 'bar'). This would cause
untracked cache corruption.
Instead, treat_directory learns to track the base length of the parent
directory, so that only the last path component is passed to
lookup_untracked.
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When in the middle of t7063, we are sure untracked cache is supported,
so we can use --force-untracked-cache to skip the support detection
phase and save a few seconds. It's also good that --force-untracked-cache
is exercised in the test suite.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach notes about a new "notes.<name>.mergeStrategy" option for
configuring the notes merge strategy when merging into
refs/notes/<name>. This option allows for the selection of merge
strategy for particular notes refs, rather than all notes ref merges, as
user may not want cat_sort_uniq for all refs, but only some. Note that
the <name> is the local reference we are merging into, not the remote
ref we merged from. The assumption is that users will mostly want to
configure separate local ref merge strategies rather than strategies
depending on which remote ref they merge from.
notes.<name>.mergeStrategy overrides the general behavior as it is more
specific.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-notes about "notes.mergeStrategy" to select a general strategy
for all notes merges. This enables a user to always get expected merge
strategy such as "cat_sort_uniq" without having to pass the "-s" option
manually.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new tests to ensure that --commit, --abort, and --strategy are
mutually exclusive.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future patch will extract parsing of the --strategy string into a
helper function in notes.c and will require the enumeration definition.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach documentation about the cat_sort_uniq rewriteMode that got added
at the same time as the equivalent merge strategy.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow untracked cache (experimental) to be used when sparse
checkout (experimental) is also in use.
* dt/untracked-sparse:
untracked-cache: support sparse checkout
An off-by-one error made "git remote" to mishandle a remote with a
single letter nickname.
* mh/get-remote-group-fix:
get_remote_group(): use skip_prefix()
get_remote_group(): eliminate superfluous call to strcspn()
get_remote_group(): rename local variable "space" to "wordlen"
get_remote_group(): handle remotes with single-character names
"git pull --rebase" has been taught to pay attention to
rebase.autostash configuration.
* kd/pull-rebase-autostash:
pull: allow dirty tree when rebase.autostash enabled
When sending an e-mail, the client and server must agree on an
authentication mechanism. Some servers (due to misconfiguration
or a bug) deny valid credentials for certain mechanisms. In this
patch, a new option --smtp-auth and configuration entry smtpAuth
are introduced. If smtp_auth is defined, it works as a whitelist
of allowed mechanisms for authentication selected from the ones
supported by the installed SASL perl library.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some Linux distributions (such as Ubuntu) have their own l10n workflows,
and their translations may be different. Add notes for this case for
l10n translators.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git about a new option, "http.sslVersion", which permits one
to specify the SSL version to use when negotiating SSL connections.
The setting can be overridden by the GIT_SSL_VERSION environment
variable.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When updating an existing configuration file, we did not always
close the filehandle that is reading from the current configuration
file when we encountered an error (e.g. when unsetting a variable
that does not exist).
Signed-off-by: Sven Strickroth <email@cs-ware.de>
Signed-off-by: Sup Yut Sum <ch3cooli@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When referring to earlier commits in commit messages or other text, one
of the established formats is
<abbrev-sha> ("<summary>", <author-date>)
Add a "Copy commit summary" command to the context menu that puts this
text for the currently selected commit on the clipboard. This makes it
easy for our users to create well-formatted commit references.
The <abbrev-sha> is produced with the %h format specifier to make it
unique. Its length can be controlled with the gitk preference
"Auto-select SHA1 (length)", or, if this preference is set to its
default value (40), with the Git config setting core.abbrev.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Use the tempfile module to ensure that the socket file gets deleted on
program exit.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
main() is responsible for cleaning up the socket in the case of
errors, so it is reasonable to also make it responsible for cleaning
it up when there are no errors. This change also makes the next step
easier.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add some code comments explaining how the fields in "struct
diff_tempfile" are used.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to perform multi-tree merges has been taught to repopulate
the cache-tree upon a successful merge into the index, so that
subsequent "diff-index --cached" (hence "status") and "write-tree"
(hence "commit") will go faster.
The same logic in "git checkout" may now be removed, but that is a
separate issue.
* dt/unpack-trees-cache-tree-revalidate:
unpack-trees: populate cache-tree on successful merge
Tests that assume how reflogs are represented on the filesystem too
much have been corrected.
* dt/reflog-tests:
tests: remove some direct access to .git/logs
t/t7509: remove unnecessary manipulation of reflog
The "new-worktree-mode" hack in "checkout" that was added in
nd/multiple-work-trees topic has been removed by updating the
implementation of new "worktree add".
* es/worktree-add-cleanup: (25 commits)
Documentation/git-worktree: fix duplicated 'from'
Documentation/config: mention "now" and "never" for 'expire' settings
Documentation/git-worktree: fix broken 'linkgit' invocation
checkout: drop intimate knowledge of newly created worktree
worktree: populate via "git reset --hard" rather than "git checkout"
worktree: avoid resolving HEAD unnecessarily
worktree: make setup of new HEAD distinct from worktree population
worktree: detect branch-name/detached and error conditions locally
worktree: add_worktree: construct worktree-population command locally
worktree: elucidate environment variables intended for child processes
worktree: make branch creation distinct from worktree population
worktree: add: suppress auto-vivication with --detach and no <branch>
worktree: make --detach mutually exclusive with -b/-B
worktree: introduce options container
worktree: simplify new branch (-b/-B) option checking
worktree: improve worktree setup message
branch: publish die_if_checked_out()
checkout: teach check_linked_checkout() about symbolic link HEAD
checkout: check_linked_checkout: simplify symref parsing
checkout: check_linked_checkout: improve "already checked out" aesthetic
...
Remove remaining cruft from "git checkout --to", which
transitioned to "git worktree add".
* es/worktree-add:
config: rename "gc.pruneWorktreesExpire" to "gc.worktreePruneExpire"
Documentation/git-worktree: wordsmith worktree-related manpages
Documentation/config: fix stale "git prune --worktree" reference
Documentation/git-worktree: fix incorrect reference to file "locked"
Documentation/git-worktree: consistently use term "linked working tree"
Code and documentation clean-up to "git bisect".
* ad/bisect-cleanup:
bisect: don't mix option parsing and non-trivial code
bisect: simplify the addition of new bisect terms
bisect: replace hardcoded "bad|good" by variables
Documentation/bisect: revise overall content
Documentation/bisect: move getting help section to the end
bisect: correction of typo
In read_sha1_file_extended we die if read_object fails with a fatal
error. We detect a fatal error if errno is non-zero and is not
ENOENT. If the object could not be read because it does not exist,
this is not considered a fatal error and we want to return NULL.
Somewhere down the line, read_object calls git_open_noatime to open
a pack index file, for example. We first try open with O_NOATIME.
If O_NOATIME fails with EPERM, we retry without O_NOATIME. When the
second open succeeds, errno is however still set to EPERM from the
first attempt. When we finally determine that the object does not
exist, read_object returns NULL and read_sha1_file_extended dies
with a fatal error:
fatal: failed to read object <sha1>: Operation not permitted
Fix this by resetting errno to zero before we call open again.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Clemens Buchacher <clemens.buchacher@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After resolving a conflicting patch, a user may wish to sign off the
patch to declare that the patch has been modified. As such, the user
will expect that running "git am --signoff --continue" will append the
signoff to the commit message.
However, the --signoff option is only taken into account during the
mail-parsing stage. If the --signoff option is set, then the signoff
will be appended to the commit message. Since the mail-parsing stage
comes before the patch application stage, the --signoff option, if
provided on the command-line when resuming, will have no effect at all.
We cannot move the append_signoff() call to the patch application stage
as the applypatch-msg hook and interactive mode, which run before patch
application, may expect the signoff to be there.
Fix this by taking note if the user explictly set the --signoff option
on the command-line, and append the signoff to the commit message when
resuming if so.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When resuming, git-am mistakenly ignores command-line options.
For instance, when a patch fails to apply with "git am patch",
subsequently running "git am --3way" would not cause git-am to fall
back on attempting a threeway merge. This occurs because by default
the --3way option is saved as "false", and the saved am options are
loaded after the command-line options are parsed, thus overwriting
the command-line options when resuming.
Fix this by moving the am_load() function call before parse_options(),
so that command-line options will override the saved am options.
The purpose of supporting this use case is to enable users to "wiggle"
that one conflicting patch. As such, it is expected that the
command-line options do not affect subsequent applied patches. Implement
this by calling am_load() once we apply the conflicting patch
successfully.
Noticed-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When resuming, git-am detects if we are trying to feed it patches or not
by checking if stdin is a TTY.
However, the test library redirects stdin to /dev/null. This makes it
difficult, for instance, to test the behavior of "git am -3" when
resuming, as git-am will think we are trying to feed it patches and
error out.
Support this use case by extending test-terminal.perl to create a
pseudo-tty for the child process' standard input as well.
Note that due to the way the code is structured, the child's stdin
pseudo-tty will be closed when we finish reading from our stdin. This
means that in the common case, where our stdin is attached to /dev/null,
the child's stdin pseudo-tty will be closed immediately. Some operations
like isatty(), which git-am uses, require the file descriptor to be
open, and hence if the success of the command depends on such functions,
test_terminal's stdin should be redirected to a source with large amount
of data to ensure that the child's stdin is not closed, e.g.
test_terminal git am --3way </dev/zero
Cc: Jonathan Nieder <jrnieder@gmail.com>
Cc: Jeff King <peff@peff.net>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These codepaths attempt to compare the "expected" current value with
the actual current value, but did not check if we successfully read
the current value before comparison.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test case introduced by ae454f61 (Add tests for wildcard "path vs ref"
disambiguation) allocates a file named '*.c'. This does not work on
Windows, because the OS forbids file names containing wildcard
characters. The test case fails where the shell attempts to allocate the
file. Skip the test on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test case introduced by 91479b9c (t7300: add tests to document
behavior of clean and nested git) uses 'chmod 0' to verify that a
subdirectory that has an unreadable .git file is not removed. This can
work only when the system pays attention to the permissions set with
'chmod'. Therefore, set the POSIXPERM prerequisite on the test case.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call "die(fmt, args...)", we end up in vreportf with
two pieces of information:
1. The prefix "fatal: "
2. The original fmt and va_list of args.
We format item (2) into a temporary buffer, and then fprintf
the prefix and the temporary buffer, along with a newline.
This has the unfortunate side effect of truncating any error
messages that are longer than 4096 bytes.
Instead, let's use separate calls for the prefix and
newline, letting us hand the item (2) directly to vfprintf.
This is essentially undoing d048a96 (print
warning/error/fatal messages in one shot, 2007-11-09), which
tried to have the whole output end up in a single `write`
call.
But we can address this instead by explicitly requesting
line-buffering for the output handle, and by making sure
that the buffer is empty before we start (so that outputting
the prefix does not cause a flush due to hitting the buffer
limit).
We may still break the output into two writes if the content
is larger than our buffer, but there's not much we can do
there; depending on the stdio implementation, that might
have happened even with a single fprintf call.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The vreportf function always goes to stderr, but run-command
wants child errors to go to the parent's original stderr. To
solve this, commit a5487dd duplicates the stderr fd and
installs die and error handlers to direct the output
appropriately (which later turned into the vwritef
function). This has two downsides, though:
- we make multiple calls to write(), which contradicts the
"write at once" logic from d048a96 (print
warning/error/fatal messages in one shot, 2007-11-09).
- the custom handlers basically duplicate the normal
handlers. They're only a few lines of code, but we
should not have to repeat the magic "exit(128)", for
example.
We can solve the first by using fdopen() on the duplicated
descriptor. We can't pass this to vreportf, but we could
introduce a new vreportf_to to handle it.
However, to fix the second problem, we instead introduce a
new "set_error_handle" function, which lets the normal
vreportf calls output to a handle besides stderr. Thus we
can get rid of our custom handlers entirely, and just ask
the regular handlers to output to our new descriptor.
And as vwritef has no more callers, it can just go away.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before creating NOTES_MERGE_REF, check NOTES_MERGE_REF using
find_shared_symref and die if we find one. This prevents simultaneous
merges to the same notes branch from different worktrees.
Signed-off-by: David Turner <dturner@twopensource.com>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new function, find_shared_symref, which contains the heart of
die_if_checked_out, but works for any symref, not just HEAD. Refactor
die_if_checked_out to use the same infrastructure as
find_shared_symref.
Soon, we will use find_shared_symref to protect notes merges in
worktrees.
Signed-off-by: David Turner <dturner@twopensource.com>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the most common uses of git_path() is to pass a
constant, like git_path("MERGE_MSG"). This has two
drawbacks:
1. The return value is a static buffer, and the lifetime
is dependent on other calls to git_path, etc.
2. There's no compile-time checking of the pathname. This
is OK for a one-off (after all, we have to spell it
correctly at least once), but many of these constant
strings appear throughout the code.
This patch introduces a series of functions to "memoize"
these strings, which are essentially globals for the
lifetime of the program. We compute the value once, take
ownership of the buffer, and return the cached value for
subsequent calls. cache.h provides a helper macro for
defining these functions as one-liners, and defines a few
common ones for global use.
Using a macro is a little bit gross, but it does nicely
document the purpose of the functions. If we need to touch
them all later (e.g., because we learned how to change the
git_dir variable at runtime, and need to invalidate all of
the stored values), it will be much easier to have the
complete list.
Note that the shared-global functions have separate, manual
declarations. We could do something clever with the macros
(e.g., expand it to a declaration in some places, and a
declaration _and_ a definition in path.c). But there aren't
that many, and it's probably better to stay away from
too-magical macros.
Likewise, if we abandon the C preprocessor in favor of
generating these with a script, we could get much fancier.
E.g., normalizing "FOO/BAR-BAZ" into "git_path_foo_bar_baz".
But the small amount of saved typing is probably not worth
the resulting confusion to readers who want to grep for the
function's definition.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_repo_path function calls mkpath() and then does some
non-trivial operations on it, like calling
is_git_directory() and read_gitfile(). These are actually
OK (they do not use more pathname static buffers
themselves), but it takes a fair bit of work to verify.
Let's use our own strbuf to store the path, and we can
simply reuse it for each iteration of the loop (we can even
avoid rewriting the beginning part, since we are trying a
series of suffixes).
To make the strbuf cleanup easier, we split out a thin
wrapper. As a bonus, this wrapper can factor out the
canonicalization that happens in all of the early-return
code paths.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The find_hook function returns the results of git_path,
which is a static buffer shared by other path-related calls.
Returning such a buffer is slightly dangerous, because it
can be overwritten by seemingly unrelated functions.
Let's at least keep our _own_ static buffer, so you can
only get in trouble by calling find_hook in quick
succession, which is less likely to happen and more obvious
to notice.
While we're at it, let's add some documentation of the
function's limitations.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first thing we do in this function is copy the input
into a strbuf. Of the 4 callers, 3 of them already have a
strbuf we could use. Let's just take the strbuf, and convert
the remaining caller to use a strbuf, rather than a raw
git_path. This is safer, anyway, as remove_dir_recursively
is a non-trivial function that might use the pathname
buffers itself (this is _probably_ OK, as the likely culprit
would be calling resolve_gitlink_ref, but we do not pass the
proper flags to ask it to avoid blowing away gitlinks).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Assigning the result of git_path is a bad pattern, because
it's not immediately obvious how long you expect the content
to stay valid (and it may be overwritten by subsequent
calls). Let's use a function-local strbuf here instead,
which we know is safe (we just have to remember to free it
in all code paths).
As a bonus, we get rid of a confusing variable-reuse
("ref_file" is used for two distinct purposes).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because it's not safe to store the static-buffer results of
git_path for a long time, we end up formatting the same
filename over and over. We can fix this by using a
function-local strbuf to store the formatted pathname and
avoid repeating ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 1a83c24 (git_snpath(): retire and replace with
strbuf_git_path(), 2014-11-30) taught log_ref_setup and
log_ref_write_1 to take a strbuf parameter, rather than a
bare string. It then makes an alias to the strbuf's "buf"
field under the original name.
This made the original diff much shorter, but the resulting
code is more complicated that it needs to be. Since we've
aliased the pointer, we drop our reference to the strbuf to
ensure we don't accidentally change it. But if we simply
drop our alias and use "logfile.buf" directly, we do not
have to worry about this aliasing. It's a larger diff, but
the resulting code is simpler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no callers of the slightly-dangerous static-buffer
git_path_submodule left. Let's drop it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In iterating over the loose refs in "refs/foo/", we keep a
running strbuf with "refs/foo/one", "refs/foo/two", etc. But
we also need to access these files in the filesystem, as
".git/refs/foo/one", etc. For this latter purpose, we make a
series of independent calls to git_path(). These are safe
(we only use the result to call stat()), but assigning the
result of git_path is a suspicious pattern that we'd rather
avoid.
This patch keeps a running buffer with ".git/refs/foo/", and
we can just append/reset each directory element as we loop.
This matches how we handle the refnames. It should also be
more efficient, as we do not keep formatting the same
".git/refs/foo" prefix (which can be arbitrarily deep).
Technically we are dropping a call to strbuf_cleanup() on
each generated filename, but that's OK; it wasn't doing
anything, as we are putting in single-level names we read
from the filesystem (so it could not possibly be cleaning up
cruft like "./" in this instance).
A clever reader may also note that the running refname
buffer ("refs/foo/") is actually a subset of the filesystem
path buffer (".git/refs/foo/"). We could get by with one
buffer, indexing the length of $GIT_DIR when we want the
refname. However, having tried this, the resulting code
actually ends up a little more confusing, and the efficiency
improvement is tiny (and almost certainly dwarfed by the
system calls we are making).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's an anti-pattern to assign the result of git_path to a
variable, since other calls may reuse our buffer. In this
case, we feed the result to unlink_or_warn immediately
afterwards, so it's OK. However, it's nice to avoid
assignment entirely, which makes it more obvious that
there's no bug.
We can just pass the result directly to unlink_or_warn,
which is a known-simple function. As a bonus, the code flow
is a little more obvious, as we eliminate an extra
conditional (a reader does not have to wonder any more
"under which circumstances is 'path' set?").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with the previous commit to git_path, assigning the
result of mkpath is suspicious, since it is not clear
whether we will still depend on the value after it may have
been overwritten by subsequent calls. This patch converts
low-hanging fruit to use mkpathdup instead of mkpath (with
the downside that we must remember to free the result).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because git_path uses a static buffer that is shared with
calls to git_path, mkpath, etc, it can be dangerous to
assign the result to a variable or pass it to a non-trivial
function. The value may change unexpectedly due to other
calls.
None of the cases changed here has a known bug, but they're
worth converting away from git_path because:
1. It's easy to use git_pathdup in these cases.
2. They use constructs (like assignment) that make it
hard to tell whether they're safe or not.
The extra malloc overhead should be trivial, as an
allocation should be an order of magnitude cheaper than a
system call (which we are clearly about to make, since we
are constructing a filename). The real cost is that we must
remember to free the result.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The add_to_alternates_file function blindly uses
hold_lock_file_for_append to copy the existing contents, and
then adds the new line to it. This has two minor problems:
1. We might add duplicate entries, which are ugly and
inefficient.
2. We do not check that the file ends with a newline, in
which case we would bogusly append to the final line.
This is quite unlikely in practice, though, as we call
this function only from git-clone, so presumably we are
the only writers of the file (and we always add a
newline).
Instead of using hold_lock_file_for_append, let's copy the
file line by line, which ensures all records are properly
terminated. If we see an extra line, we can simply abort the
update (there is no point in even copying the rest, as we
know that it would be identical to the original).
As a bonus, we also get rid of some calls to the
static-buffer mkpath and git_path functions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The early part of this test is rather old, and does not
follow our usual style guidelines. In particular:
- the tests liberally chdir, and expect out-of-test "cd"
commands to return them to a sane state
- test commands aren't indented at all
- there are a lot of minor formatting nits, like the
opening quote of the test block on the wrong line,
spaces after ">", etc
This patch fixes the style issues, and uses a few helper
functions, along with subshells and "git -C", to avoid
changing the cwd of the main script.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git_path function has "git_pathdup" and
"strbuf_git_path" variants, but git_submodule_path only
comes in the dangerous, static-buffer variant. That makes
refactoring callers to use the safer functions hard (since
they don't exist).
Since we're already using a strbuf behind the scenes, it's
easy to expose all three of these interfaces with thin
wrappers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment above these functions actually describes
sha1_file_name, and comes from the very first revision of
git. Commit 723c31f (Add "git_path()" and "head_ref()"
helper functions., 2005-07-05) added git_path, pushing the
comment away from the function it describes; later commits
added more functions in this block.
Let's fix the comment to describe these related functions in
more detail. Let's also make sure to point out their safer
alternatives (and move those alternatives below, which makes
more sense when reading the file).
Note that we do not need to move the existing comment to
sha1_file_name. Commit d40d535 (sha1_file.c: document a
bunch of functions defined in the file, 2014-02-21) already
added a much more descriptive comment to it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow an existing file to be registered with the tempfile-handling
infrastructure; in particular, arrange for it to be deleted on program
exit. This can be used if the temporary file has to be created in a
more complicated way than just open(). For example:
* If the file itself needs to be created via the lockfile API
* If it is not a regular file (e.g., a socket)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add several functions for creating temporary files with
automatically-generated names, analogous to mkstemps(), but also
arranging for the files to be deleted on program exit.
The functions are named according to a pattern depending how they
operate. They will be used to replace many places in the code where
temporary files are created and cleaned up ad-hoc.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the next step easier.
The old code used to use "path" to set the initial length of
tempfile->filename. This was not helpful because path was usually
relative whereas the value stored to filename will be absolute. So
just initialize the length to 0.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A lot of work went into defining the state diagram for lockfiles and
ensuring correct, race-resistant cleanup in all circumstances.
Most of that infrastructure can be applied directly to *any* temporary
file. So extract a new "tempfile" module from the "lockfile" module.
Reimplement lockfile on top of tempfile.
Subsequent commits will add more users of the new module.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
First beef up the sanity checking in get_locked_file_path() to match
that in commit_lock_file(). Then rewrite commit_lock_file() to use
get_locked_file_path() for its pathname computation.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are about to move those members, so change client code to read them
through accessor functions.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_pack_data() passes bundle_fd to start_command() to be used as
the stdout of pack-objects. But start_command() closes its stdout if
it is > 1. This is a problem if bundle_fd is the fd of a lock_file,
because commit_lock_file() will also try to close the fd.
So the old code suppressed commit_lock_file()'s usual behavior of
closing the file descriptor by setting the lock_file object's fd field
to -1.
But this is not really kosher. Code here shouldn't be mutating fields
within the lock_file object.
Instead, duplicate the file descriptor before passing it to
write_pack_data(). Then that function can close its copy without
closing the copy held in the lock_file object.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rearrange/rewrite it somewhat to fit its new environment.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The loop in strbuf_read() uses xread() repeatedly while extending
the strbuf until the call returns zero. If the buffer is
sufficiently large to begin with, this results in xread()
returning the remainder of the file to the end (returning
non-zero), the loop extending the strbuf, and then making another
call to xread() to have it return zero.
By using read_in_full(), we can tell when the read reached the end
of file: when it returns less than was requested, it's eof. This
way we can avoid an extra iteration that allocates an extra 8kB
that is never used.
Signed-off-by: Jim Hill <gjthill@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 5a688fe4 ("core.sharedrepository = 0mode" should set, not
loosen, 2009-03-25), we kept reminding ourselves:
NEEDSWORK: this should be renamed to finalize_temp_file() as
"moving" is only a part of what it does, when no patch between
master to pu changes the call sites of this function.
without doing anything about it. Let's do so.
The purpose of this function was not to move but to finalize. The
detail of the primarily implementation of finalizing was to link the
temporary file to its final name and then to unlink, which wasn't
even "moving". The alternative implementation did "move" by calling
rename(2), which is a fun tangent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to various components of the URI being stripped off it may
happen that we fail to guess a directory name. We currently error
out with a message that it is impossible to create the working
tree '' in such cases. Instead, error out early with a sensible
error message hinting that a directory name should be specified
manually on the command line.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the URI contains a port number and the URI's path component is
empty we fail to guess a sensible directory name. E.g. cloning a
repository 'ssh://example.com:2222/' we guess a directory name
'2222' where we would want the hostname only, e.g. 'example.com'.
We need to take care to not drop trailing port-like numbers in
certain cases. E.g. when cloning a repository 'foo/bar:2222.git'
we want to guess the directory name '2222' instead of 'bar'.
Thus, we have to first check the stripped URI for path separators
and only strip port numbers if there are path separators present.
This heuristic breaks when cloning a repository 'bar:2222.git',
though.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the URI contains authentication data and the URI's path
component is empty, we fail to guess a sensible directory name.
E.g. cloning a repository 'ssh://user:password@example.com/' we
guess a directory name 'password@example.com' where we would want
the hostname only, e.g. 'example.com'.
The naive way of just adding '@' as a path separator would break
cloning repositories like 'foo/bar@baz.git' (which would
currently become 'bar@baz' but would then become 'baz' only).
Instead fix this by first dropping the scheme and then greedily
scanning for an '@' sign until we find the first path separator.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7e837c6 (clone: simplify string handling in
guess_dir_name(), 2015-07-09) changed clone to use
strip_suffix instead of hand-rolled pointer manipulation.
However, strip_suffix will strip from the end of a
NUL-terminated string, and we may have already stripped some
characters (like directory separators, or "/.git"). This
leads to commands like:
git clone host:foo.git/
failing to strip the ".git".
We must instead convert our pointer arithmetic into a
computed length and feed that to strip_suffix_mem, which will
then reduce the length further for us.
It would be nicer if we could drop the pointer manipulation
entirely, and just continually strip using strip_suffix. But
that doesn't quite work for two reasons:
1. The early suffixes we're stripping are not constant; we
need to look for is_dir_sep, which could be one of
several characters.
2. Mid-way through the stripping we compute the pointer
"start", which shows us the beginning of the pathname.
Which really give us two lengths to work with: the
offset from the start of the string, and from the start
of the path. By using pointers for the early part, we
can just compute the length from "start" when we need
it.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we run "git clone $url", clone guesses from the $url
what to name the local output directory. We don't have any
test coverage of this, so let's add some basic tests.
This reveals a few problems:
- cloning "foo.git/" does not properly remove the ".git";
this is a recent regression from 7e837c6 (clone:
simplify string handling in guess_dir_name(), 2015-07-09)
- likewise, cloning foo/.git does not seem to handle the
bare case (we should end up in foo.git, but we try to
use foo/.git on the local end), which also comes from
7e837c6.
- cloning the root is not very smart about URL parsing,
and usernames and port numbers may end up in the
directory name
All of these tests are marked as failures.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recenty I created a multi-line branch description with '.' and '='
characters on one of the lines, and noticed that fragments of that line
show up when completing set variable names for 'git config', e.g.:
$ git config --get branch.b.description
Branch description to fool the completion script with a
second line containing dot . and equals = characters.
$ git config --unset <TAB>
...
second line containing dot . and equals
...
The completion script runs 'git config --list' and processes its output
to strip the values and keep only the variable names. It does so by
looking for lines containing '.' and '=' and outputting everything
before the '=', which was fooled by my multi-line branch description.
A similar issue exists with aliases and pretty format aliases with
multi-line values, but in that case 'git config --get-regexp' is run and
lines in its output are simply stripped after the first space, so
subsequent lines don't even have to contain '.' and '=' to fool the
completion script.
Use the new '--name-only' option added in the previous commit to list
config variable names reliably in both cases, without error-prone post
processing.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git config' can only show values or name-value pairs, so if a shell
script needs the names of set config variables it has to run 'git config
--list' or '--get-regexp' and parse the output to separate config
variable names from their values. However, such a parsing can't cope
with multi-line values. Though 'git config' can produce null-terminated
output for newline-safe parsing, that's of no use in such a case, becase
shells can't cope with null characters.
Even our own bash completion script suffers from these issues.
Help the completion script, and shell scripts in general, by introducing
the '--name-only' option to modify the output of '--list' and
'--get-regexp' to list only the names of config variables, so they don't
have to perform error-prone post processing to separate variable names
from their values anymore.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some English words inside the Chinese sentences appear without
surrounding spaces, which are considered irregular.
This commit try to fix this issue, with the help of some regular
express patterns.
Signed-off-by: Ray Chen <oldsharp@gmail.com>
The "-x" test-script option turns on the shell's "-x"
tracing, which can help show why a particular test is
failing. Unfortunately, this can create false negatives in
some tests if they invoke a shell function with its stderr
redirected. t5512.10 is such a test, as it does:
test_must_fail git ls-remote refs*master >actual 2>&1 &&
test_cmp exp actual
The "actual" file gets the "-x" trace for the test_must_fail
function, which prevents it from matching the expected
output.
There's no way to avoid this without managing the
trace flag inside each sub-function, which isn't really a
workable solution. But unless you specifically care about
t5512.10, we can work around it by enabling tracing only for
the specific tests we want.
You can already do:
./t5512-ls-remote.sh -x --verbose-only=16
to see the trace only for a specific test. But that doesn't
_disable_ the tracing in the other tests; it just sends it
to /dev/null. However, there's no point in generating a
trace that the user won't see, so we can simply disable
tracing whenever it doesn't have a matching verbose flag.
The normal case of just "./t5512-ls-remote.sh -x" stays the
same, as "-x" already implies "--verbose" (and
"--verbose-only" overrides "--verbose", which is why this
works at all). And for our test, we need only check
$verbose, as maybe_setup_verbose will have already
set that flag based on the $verbose_only list).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that GIT_TEST_CHAIN_LINT is on by default, running:
./t0000-basic.sh -x --verbose-only=1
starts with:
expecting success:
find .git/objects -type f -print >should-be-empty &&
test_line_count = 0 should-be-empty
+ exit 117
error: last command exited with $?=117
+ find .git/objects -type f -print
+ test_line_count = 0 should-be-empty
+ test 3 != 3
+ wc -l
+ test 0 = 0
ok 1 - .git/objects should be empty after git init in an empty repo
This is confusing, as the "exit 117" line and the error line
(which is printed in red, no less!) are not part of the test
at all, but are rather in the separate chain-lint test_eval.
Let's unset the "trace" variable when eval-ing the chain
lint check, which avoids this.
Note that we cannot just do a one-shot variable like:
trace= test_eval ...
as the behavior of one-shot variables for function calls
is not portable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you hide a hierarchy of refs using the transfer.hideRefs
config, there is no way to later override that config to
"unhide" it. This patch implements a "negative" hide which
causes matches to immediately be marked as unhidden, even if
another match would hide it. We take care to apply the
matches in reverse-order from how they are fed to us by the
config machinery, as that lets our usual "last one wins"
config precedence work (and entries in .git/config, for
example, will override /etc/gitconfig).
So you can now do:
$ git config --system transfer.hideRefs refs/secret
$ git config transfer.hideRefs '!refs/secret/not-so-secret'
to hide refs/secret in all repos, except for one public bit
in one specific repo. Or you can even do:
$ git clone \
-u "git -c transfer.hiderefs="!refs/foo" upload-pack" \
remote:repo.git
to clone remote:repo.git, overriding any hiding it has
configured.
There are two alternatives that were considered and
rejected:
1. A generic config mechanism for removing an item from a
list. E.g.: (e.g., "[transfer] hideRefs -= refs/foo").
This is nice because it could apply to other
multi-valued config, as well. But it is not nearly as
flexible. There is no way to say:
[transfer]
hideRefs = refs/secret
hideRefs = refs/secret/not-so-secret
Having explicit negative specifications means we can
override previous entries, even if they are not the
same literal string.
2. Adding another variable to override some parts of
hideRefs (e.g., "exposeRefs").
This solves the problem from alternative (1), but it
cannot easily obey the normal config precedence,
because it would use two separate lists. For example:
[transfer]
hideRefs = refs/secret
exposeRefs = refs/secret/not-so-secret
hideRefs = refs/secret/not-so-secret/no-really-its-secret
With two lists, we have to apply the "expose" rules
first, and only then apply the "hide" rules. But that
does not match what the above config intends.
Of course we could internally parse that to a single
list, respecting the ordering, which saves us having to
invent the new "!" syntax. But using a single name
communicates to the user that the ordering _is_
important. And "!" is well-known for negation, and
should not appear at the beginning of a ref (it is
actually valid in a ref-name, but all entries here
should be fully-qualified, starting with "refs/").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add translations of Git glossary (most of them are from the command `git
help glossary`) in the header of `zh_CN.po`. Also fixes some translations
according to this glossary, such as "pathspec", "repository", "refspec".
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Ray Chen <oldsharp@gmail.com>
During cleanup we do a simple 'rm /*' to remove leftover files
from previous tests. As 'rm' errors out when there is anything it
cannot delete and there are directories present at '/' it will
throw an error, causing the '&&' chain to fail.
Fix this by explicitly removing the files.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the am.threeWay configuration variable to use the -3 or --3way
option of git am by default. When am.threeway is set and not desired
for a specific git am command, the --no-3way option can be used to
override it.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the beginning of the rewrite of git-am.sh to C, in order to not break
existing test scripts that depended on a functional git-am, a
redirection to git-am.sh was introduced that would activate if the
environment variable _GIT_USE_BUILTIN_AM was not defined.
Now that all of git-am.sh's functionality has been re-implemented in
builtin/am.c, remove this redirection, and retire git-am.sh into
contrib/examples/.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commit_tree() is called, if the user does not have an explicit
committer ident configured, it will attempt to construct a default
committer ident based on the user's and system's info (e.g. gecos field,
hostname etc.) However, if a default committer ident is unable to be
constructed, commit_tree() will die(), but at this point of git-am's
execution, there will already be changes made to the index and work
tree.
This can be confusing to new users, and as such since d64e6b0 (Keep
Porcelainish from failing by broken ident after making changes.,
2006-02-18) git-am.sh will check to see if the committer ident has been
configured, or a default one can be constructed, before even starting to
apply patches.
Re-implement this in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -b/--binary option was initially implemented in 087b674 (git-am:
--binary; document --resume and --binary., 2005-11-16). The option will
pass the --binary flag to git-apply to allow it to apply binary patches.
However, in 2b6eef9 (Make apply --binary a no-op., 2006-09-06), --binary
was been made a no-op in git-apply. Following that, since cb3a160
(git-am: ignore --binary option, 2008-08-09), the --binary option in
git-am is ignored as well.
In 6c15a1c (am: officially deprecate -b/--binary option, 2012-03-13),
the --binary option was tweaked to its present behavior: when set, the
message:
The -b/--binary option has been a no-op for long time, and it
will be removed. Please do not use it anymore.
will be printed.
Re-implement this in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07),
git-am.sh supported the --interactive mode. After parsing the patch mail
and extracting the patch, commit message and authorship info, an
interactive session will begin that allows the user to choose between:
* applying the patch
* applying the patch and all subsequent patches (by disabling
interactive mode in subsequent patches)
* skipping the patch
* editing the commit message
Since f89ad67 (Add [v]iew patch in git-am interactive., 2005-10-25),
git-am.sh --interactive also supported viewing the patch to be applied.
When --resolved-ing in --interactive mode, we need to take care to
update the patch with the contents of the index, such that the correct
patch will be displayed when the patch is viewed in interactive mode.
Re-implement the above in builtin/am.c
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 0cfd112 (am: preliminary support for hg patches, 2011-08-29),
git-am.sh could convert mercurial patches to an RFC2822 mail patch
suitable for parsing with git-mailinfo, and queue them in the state
directory for application.
Since 15ced75 (git-am foreign patch support: autodetect some patch
formats, 2009-05-27), git-am.sh was able to auto-detect mercurial
patches by checking if the file begins with the line:
# HG changeset patch
Re-implement the above in builtin/am.c.
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c574e68 (git-am foreign patch support: StGIT support, 2009-05-27),
git-am.sh is able to read a single StGit series file and, for each StGit
patch listed in the file, convert the StGit patch into a RFC2822 mail
patch suitable for parsing with git-mailinfo, and queue them in the
state directory for applying.
Since 15ced75 (git-am foreign patch support: autodetect some patch
formats, 2009-05-27), git-am.sh is able to auto-detect StGit series
files by checking to see if the file starts with the string:
# This series applies on GIT commit
Re-implement the above in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c574e68 (git-am foreign patch support: StGIT support, 2009-05-27),
git-am.sh supported converting StGit patches into RFC2822 mail patches
that can be parsed with git-mailinfo.
Implement this by introducing two functions in builtin/am.c:
stgit_patch_to_mail() and split_mail_conv().
stgit_patch_to_mail() is a callback function for split_mail_conv(), and
contains the logic for converting an StGit patch into an RFC2822 mail
patch.
split_mail_conv() implements the logic to go through each file in the
`paths` list, reading from stdin where specified, and calls the callback
function to write the converted patch to the corresponding output file
in the state directory. This interface should be generic enough to
support other foreign patch formats in the future.
Since 15ced75 (git-am foreign patch support: autodetect some patch
formats, 2009-05-27), git-am.sh is able to auto-detect StGit patches.
Re-implement this in builtin/am.c.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am.sh will call git-rerere at the following events:
* "git rerere" when a three-way merge fails to record the conflicted
automerge results. Since 8389b52 (git-rerere: reuse recorded resolve.,
2006-01-28)
* Since cb6020b (Teach --[no-]rerere-autoupdate option to merge,
revert and friends, 2009-12-04), git-am.sh supports the
--[no-]rerere-autoupdate option as well, and would pass it to
git-rerere.
* "git rerere" when --resolved, to record the hand resolution. Since
f131dd4 (rerere: record (or avoid misrecording) resolved, skipped or
aborted rebase/am, 2006-12-08)
* "git rerere clear" when --skip-ing. Since f131dd4 (rerere: record (or
avoid misrecording) resolved, skipped or aborted rebase/am,
2006-12-08)
* "git rerere clear" when --abort-ing. Since 3e5057a (git am --abort,
2008-07-16)
Re-implement the above in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07),
git-am.sh will invoke the post-applypatch hook after the patch is
applied and a commit is made. The exit code of the hook is ignored.
Re-implement this in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07),
git-am.sg will invoke the pre-applypatch hook after applying the patch
to the index, but before a commit is made. Should the hook exit with a
non-zero status, git am will exit.
Re-implement this in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07),
git-am.sh will invoke the applypatch-msg hooks just after extracting the
patch message. If the applypatch-msg hook exits with a non-zero status,
git-am.sh abort before even applying the patch to the index.
Re-implement this in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since eb2151b (rebase: support automatic notes copying, 2010-03-12),
git-am.sh supported automatic notes copying in --rebasing mode by
invoking "git notes copy" once it has finished applying all the patches.
Re-implement this feature in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 96e1948 (rebase: invoke post-rewrite hook, 2010-03-12), git-am.sh
will invoke the post-rewrite hook after it successfully finishes
applying all the queued patches.
To do this, when parsing a mail to extract its patch and metadata, in
--rebasing mode git-am.sh will also store the original commit ID in the
$state_dir/original-commit file. Once it applies and commits the patch,
the original commit ID, and the new commit ID, will be appended to the
$state_dir/rewritten file.
Once all of the queued mail have been processed, git-am.sh will then
invoke the post-rewrite hook with the contents of the
$state_dir/rewritten file.
Re-implement this in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 3b4e395 (am: add the --gpg-sign option, 2014-02-01), git-am.sh
supported the --gpg-sign option, and would pass it to git-commit-tree,
thus GPG-signing the commit object.
Re-implement this option in builtin/am.c.
git-commit-tree would also sign the commit by default if the
commit.gpgsign setting is true. Since we do not run commit-tree, we
re-implement this behavior by handling the commit.gpgsign setting
ourselves.
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 3f01ad6 (am: Add --committer-date-is-author-date option,
2009-01-22), git-am.sh implemented the --committer-date-is-author-date
option, which tells git-am to use the timestamp recorded in the email
message as both author and committer date.
Re-implement this option in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since a79ec62 (git-am: Add --ignore-date option, 2009-01-24), git-am.sh
supported the --ignore-date option, and would use the current timestamp
instead of the one provided in the patch if the option was set.
Re-implement this option in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am.sh recognizes some of git-apply's options, and would pass them to
git-apply:
* --whitespace, since 8c31cb8 (git-am: --whitespace=x option.,
2006-02-28)
* -C, since 67dad68 (add -C[NUM] to git-am, 2007-02-08)
* -p, since 2092a1f (Teach git-am to pass -p option down to git-apply,
2007-02-11)
* --directory, since b47dfe9 (git-am: add --directory=<dir> option,
2009-01-11)
* --reject, since b80da42 (git-am: implement --reject option passed to
git-apply, 2009-01-23)
* --ignore-space-change, --ignore-whitespace, since 86c91f9 (git apply:
option to ignore whitespace differences, 2009-08-04)
* --exclude, since 77e9e49 (am: pass exclude down to apply, 2011-08-03)
* --include, since 58725ef (am: support --include option, 2012-03-28)
* --reject, since b80da42 (git-am: implement --reject option passed to
git-apply, 2009-01-23)
Re-implement support for these options in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 017678b (am/mailinfo: Disable scissors processing by default,
2009-08-26), git-am supported the --[no-]scissors option, passing it to
git-mailinfo.
Re-implement support for this option in builtin/am.c.
Since the default setting of --scissors in git-mailinfo can be
configured with mailinfo.scissors (and perhaps through other settings in
the future), to be safe we make an explicit distinction between
SCISSORS_UNSET, SCISSORS_TRUE and SCISSORS_FALSE.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since ad2c928 (git-am: Add command line parameter `--keep-cr` passing it
to git-mailsplit, 2010-02-27), git-am.sh supported the --keep-cr option
and would pass it to git-mailsplit.
Since e80d4cb (git-am: Add am.keepcr and --no-keep-cr to override it,
2010-02-27), git-am.sh supported the am.keepcr config setting, which
controls whether --keep-cr is on by default.
Re-implement the above in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since a078f73 (git-am: add --message-id/--no-message-id, 2014-11-25),
git-am.sh supported the --[no-]message-id options, and the
"am.messageid" setting which specifies the default option.
--[no-]message-id tells git-am whether or not the -m option should be
passed to git-mailinfo.
Re-implement this option in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07),
git-am.sh supported the -k/--keep option to pass the -k option to
git-mailsplit.
Since f7e5ea1 (am: learn passing -b to mailinfo, 2012-01-16), git-am.sh
supported the --keep-non-patch option to pass the -b option to
git-mailsplit.
Re-implement these two options in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07),
git-am.sh supported the -u,--utf8 option. If set, the -u option will be
passed to git-mailinfo to re-code the commit log message and authorship
in the charset specified by i18n.commitencoding. If unset, the -n option
will be passed to git-mailinfo, which disables the re-encoding.
Since d84029b (--utf8 is now default for 'git-am', 2007-01-08), --utf8
is specified by default in git-am.sh.
Re-implement the above in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Should git-am terminate unexpectedly between the point where the state
directory is created, but the "next" and "last" files are not written
yet, a stray state directory will be left behind.
As such, since b141f3c (am: handle stray $dotest directory, 2013-06-15),
git-am.sh explicitly recognizes such a stray directory, and allows the
user to remove it with am --abort.
Re-implement this feature in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 5e835ca (rebase: do not munge commit log message, 2008-04-16),
git am --rebasing no longer gets the commit log message from the patch,
but reads it directly from the commit identified by the "From " header
line.
Since 43c2325 (am: use get_author_ident_from_commit instead of mailinfo
when rebasing, 2010-06-16), git am --rebasing also gets the author name,
email and date directly from the commit.
Since 0fbb95d (am: don't call mailinfo if $rebasing, 2012-06-26), git am
--rebasing does not use git-mailinfo to get the patch body, but rather
generates it directly from the commit itself.
The above 3 commits introduced a separate parse_mail() code path in
git-am.sh's --rebasing mode that bypasses git-mailinfo. Re-implement
this code path in builtin/am.c as parse_mail_rebase().
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 3041c32 (am: --rebasing, 2008-03-04), git-am.sh supported the
--rebasing option, which is used internally by git-rebase to tell git-am
that it is being used for its purpose. It would create the empty file
$state_dir/rebasing to help "completion" scripts tell if the ongoing
operation is am or rebase.
As of 0fbb95d (am: don't call mailinfo if $rebasing, 2012-06-26),
--rebasing also implies --3way as well.
Since a1549e1 (am: return control to caller, for housekeeping,
2013-05-12), git-am.sh would only clean up the state directory when it
is not --rebasing, instead deferring cleanup to git-rebase.sh.
Re-implement the above in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07),
git-am.sh supported the --3way option, and if set, would attempt to do a
3-way merge if the initial patch application fails.
Since 5d86861 (am -3: list the paths that needed 3-way fallback,
2012-03-28), in a 3-way merge git-am.sh would list the paths that needed
3-way fallback, so that the user can review them more carefully to spot
mismerges.
Re-implement the above in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A caller may wish to write a temporary index as a tree. However,
write_cache_as_tree() assumes that the index was read from, and will
write to, the default index file path. Introduce write_index_as_tree()
which removes this limitation by allowing the caller to specify its own
index_state and index file path.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07), git-am
supported the --signoff option which will append a signoff at the end of
the commit messsage. Re-implement this feature in parse_mail() by
calling append_signoff() if the option is set.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since ced9456 (Give the user a hint for how to continue in the case that
git-am fails because it requires user intervention, 2006-05-02), git-am
prints additional information on how the user can re-invoke git-am to
resume patch application after resolving the failure. Re-implement this
through the die_user_resolve() function.
Since cc12005 (Make git rebase interactive help match documentation.,
2006-05-13), git-am supports the --resolvemsg option which is used by
git-rebase to override the message printed out when git-am fails.
Re-implement this option.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 0e987a1 (am, rebase: teach quiet option, 2009-06-16), git-am
supported the --quiet option, and when told to be quiet, would only
speak on failure. Re-implement this by introducing the say() function,
which works like fprintf_ln(), but would only write to the stream when
state->quiet is false.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07), git-am
would error out if the user gave it mbox(s) on the command-line, but
there was a session in progress.
Since c95b138 (Fix git-am safety checks, 2006-09-15), git-am would
detect if the user attempted to feed it a mbox via stdin, by checking if
stdin is not a tty and there is no resume command given.
Re-implement the above two safety checks.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 3e5057a (git am --abort, 2008-07-16), git-am supported the --abort
option that will rewind HEAD back to the original commit. Re-implement
this through am_abort().
Since 7b3b7e3 (am --abort: keep unrelated commits since the last failure
and warn, 2010-12-21), to prevent commits made since the last failure
from being lost, git-am will not rewind HEAD back to the original
commit if HEAD moved since the last failure. Re-implement this through
safe_to_abort().
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07), git-am
supported resuming from a failed patch application by skipping the
current patch. Re-implement this feature by introducing am_skip().
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 271440e (git-am: make it easier after fixing up an unapplicable
patch., 2005-10-25), when "git am" is run again after being paused, the
current mail message will not be re-parsed, but instead the contents of
the state directory's patch, msg and author-script files will be used
as-is instead.
Re-implement this in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 0c15cc9 (git-am: --resolved., 2005-11-16), git-am supported
resuming from a failed patch application. The user will manually apply
the patch, and the run git am --resolved which will then commit the
resulting index. Re-implement this feature by introducing am_resolve().
Since it makes no sense for the user to run am --resolved when there is
no session in progress, we error out in this case.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07), git-am
will refuse to apply patches if the index is dirty. Re-implement this
behavior in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement do_commit(), which commits the index which contains the
results of applying the patch, along with the extracted commit message
and authorship information.
Since 29b6754 (am: remove rebase-apply directory before gc, 2010-02-22),
git gc --auto is also invoked to pack the loose objects that are created
from making the commits.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement applying the patch to the index using git-apply.
If a file is unchanged but stat-dirty, git-apply may erroneously fail to
apply patches, thinking that they conflict with a dirty working tree.
As such, since 2a6f08a (am: refresh the index at start and --resolved,
2011-08-15), git-am will refresh the index before applying patches.
Re-implement this behavior.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the purpose of applying the patch and committing the results,
implement extracting the patch data, commit message and authorship from
an e-mail message using git-mailinfo.
git-mailinfo is run as a separate process, but ideally in the future,
we should be be able to access its functionality directly without
spawning a new process.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 15ced75 (git-am foreign patch support: autodetect some patch
formats, 2009-05-27), git-am.sh is able to autodetect mbox, stgit and
mercurial patches through heuristics.
Re-implement support for autodetecting mbox/maildir files in
builtin/am.c.
RFC 2822 requires that lines are terminated by "\r\n". To support this,
implement strbuf_getline_crlf(), which will remove both '\n' and "\r\n"
from the end of the line.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am.sh supports mbox, stgit and mercurial patches. Re-implement
support for splitting out mbox/maildirs using git-mailsplit, while also
implementing the framework required to support other patch formats in
the future.
Re-implement support for the --patch-format option (since a5a6755
(git-am foreign patch support: introduce patch_format, 2009-05-27)) to
allow the user to choose between the different patch formats.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am applies a series of patches. If the process terminates
abnormally, we want to be able to resume applying the series of patches.
This requires the session state to be saved in a persistent location.
Implement the mechanism of a "patch queue", represented by 2 integers --
the index of the current patch we are applying and the index of the last
patch, as well as its lifecycle through the following functions:
* am_setup(), which will set up the state directory
$GIT_DIR/rebase-apply. As such, even if the process exits abnormally,
the last-known state will still persist.
* am_load(), which is called if there is an am session in
progress, to load the last known state from the state directory so we
can resume applying patches.
* am_run(), which will do the actual patch application. After applying a
patch, it calls am_next() to increment the current patch index. The
logic for applying and committing a patch is not implemented yet.
* am_destroy(), which is finally called when we successfully applied all
the patches in the queue, to clean up by removing the state directory
and its contents.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Stefan Beller <sbeller@google.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the purpose of rewriting git-am.sh into a C builtin, implement a
skeletal builtin/am.c that redirects to $GIT_EXEC_PATH/git-am if the
environment variable _GIT_USE_BUILTIN_AM is not defined. Since in the
Makefile git-am.sh takes precedence over builtin/am.c,
$GIT_EXEC_PATH/git-am will contain the shell script git-am.sh, and thus
this allows us to fall back on the functional git-am.sh when running the
test suite for tests that depend on a working git-am implementation.
Since git-am.sh cannot handle any environment modifications by
setup_git_directory(), "am" is declared with no setup flags in git.c. On
the other hand, to re-implement git-am.sh in builtin/am.c, we need to
run all the git dir and work tree setup logic that git.c typically does
for us. As such, we work around this temporarily by copying the logic in
git.c's run_builtin(), which is roughly:
prefix = setup_git_directory();
trace_repo_setup(prefix);
setup_work_tree();
This redirection should be removed when all the features of git-am.sh
have been re-implemented in builtin/am.c.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common usage pattern of fopen() is to check if it succeeded, and die()
if it failed:
FILE *fp = fopen(path, "w");
if (!fp)
die_errno(_("could not open '%s' for writing"), path);
Implement a wrapper function xfopen() for the above, so that we can save
a few lines of code and make the die() messages consistent.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common usage pattern of open() is to check if it was successful, and
die() if it was not:
int fd = open(path, O_WRONLY | O_CREAT, 0777);
if (fd < 0)
die_errno(_("Could not open '%s' for writing."), path);
Implement a wrapper function xopen() that does the above so that we can
save a few lines of code, and make the die() messages consistent.
Helped-by: Torsten Bögershausen <tboegi@web.de>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check the return value of read_ref in 19 out of 21 cases.
This adds checks to the missing cases.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As-is, the revisions that appear on the command-line are processed in
order. This would mix badly with code that changes the configuration
(e.g. change $TERM_GOOD and $TERM_BAD) while processing the options.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* es/doc-clean-outdated-tools:
Documentation/git-tools: retire manually-maintained list
Documentation/git-tools: drop references to defunct tools
Documentation/git-tools: fix item text formatting
Documentation/git-tools: improve discoverability of Git wiki
Documentation/git: drop outdated Cogito reference
Allow an asterisk as a substring (as opposed to the entirety) of
a path component for both side of a refspec, e.g.
"refs/heads/o*:refs/remotes/heads/i*".
* jk/refspec-parse-wildcard:
refs: loosen restriction on wildcard "*" refspecs
refs: cleanup comments regarding check_refname_component()
"git subtree" (in contrib/) depended on "git log" output to be
stable, which was a no-no. Apply a workaround to force a
particular date format.
* da/subtree-date-confusion:
contrib/subtree: ignore log.date configuration
An attempt to delete a ref by pushing into a repositorywhose HEAD
symbolic reference points at an unborn branch that cannot be
created due to ref D/F conflict (e.g. refs/heads/a/b exists, HEAD
points at refs/heads/a) failed.
* jx/do-not-crash-receive-pack-wo-head:
receive-pack: crash when checking with non-exist HEAD
The low-level "git send-pack" did not honor 'user.signingkey'
configuration variable when sending a signed-push.
* db/send-pack-user-signingkey:
builtin/send-pack.c: respect user.signingkey
In preparation for allowing different "backends" to store the refs
in a way different from the traditional "one ref per file in $GIT_DIR
or in a $GIT_DIR/packed-refs file" filesystem storage, reduce
direct filesystem access to ref-like things like CHERRY_PICK_HEAD
from scripts and programs.
* dt/refs-backend-preamble:
git-stash: use update-ref --create-reflog instead of creating files
update-ref and tag: add --create-reflog arg
refs: add REF_FORCE_CREATE_REFLOG flag
git-reflog: add exists command
refs: new public ref function: safe_create_reflog
refs: break out check for reflog autocreation
refs.c: add err arguments to reflog functions
"sparse checkout" misbehaved for a path that is excluded from the
checkout when switching between branches that differ at the path.
* as/sparse-checkout-removal:
unpack-trees: don't update files with CE_WT_REMOVE set
Teach "git log" and friends a new "--date=format:..." option to
format timestamps using system's strftime(3).
* jk/date-mode-format:
strbuf: make strbuf_addftime more robust
introduce "format" date-mode
convert "enum date_mode" into a struct
show-branch: use DATE_RELATIVE instead of magic number
* pt/am-tests:
t3901: test git-am encoding conversion
t3418: non-interactive rebase --continue with rerere enabled
t4150: tests for am --[no-]scissors
t4150: am with post-applypatch hook
t4150: am with pre-applypatch hook
t4150: am with applypatch-msg hook
t4150: am --resolved fails if index has unmerged entries
t4150: am --resolved fails if index has no changes
t4150: am refuses patches when paused
t4151: am --abort will keep dirty index intact
t4150: am fails if index is dirty
t4150: am.messageid really adds the message id
Optimize computation of untracked status indicator by bash prompt
script (in contrib/).
* sg/bash-prompt-untracked-optim:
bash prompt: faster untracked status indicator with untracked directories
bash prompt: test untracked files status indicator with untracked dirs
An experimental "untracked cache" feature used uname(2) in a
slightly unportable way.
* cb/uname-in-untracked:
untracked: fix detection of uname(2) failure
A "rebase" replays changes of the local branch on top of something
else, as such they are placed in stage #3 and referred to as
"theirs", while the changes in the new base, typically a foreign
work, are placed in stage #2 and referred to as "ours". Clarify
the "checkout --ours/--theirs".
* se/doc-checkout-ours-theirs:
checkout: document subtlety around --ours/--theirs
The "rev-parse --parseopt" mode parsed the option specification
and the argument hint in a strange way to allow '=' and other
special characters in the option name while forbidding them from
the argument hint. This made it impossible to define an option
like "--pair <key>=<value>" with "pair=key=value" specification,
which instead would have defined a "--pair=key <value>" option.
* ib/scripted-parse-opt-better-hint-string:
rev-parse --parseopt: allow [*=?!] in argument hints
Often a fast-import stream builds a new commit on top of the
previous commit it built, and it often unconditionally emits a
"from" command to specify the first parent, which can be omitted in
such a case. This caused fast-import to forget the tree of the
previous commit and then re-read it from scratch, which was
inefficient. Optimize for this common case.
* mh/fast-import-optimize-current-from:
fast-import: do less work when given "from" matches current branch head
"git fast-import" learned to respond to the get-mark command via
its cat-blob-fd interface.
* mh/fast-import-get-mark:
fast-import: add a get-mark command
Add "drop commit-object-name subject" command as another way to
skip replaying of a commit in "rebase -i", and then punish those
who do not use it (and instead just remove the lines) by throwing
a warning.
* gr/rebase-i-drop-warn:
git rebase -i: add static check for commands and SHA-1
git rebase -i: warn about removed commits
git-rebase -i: add command "drop" to remove a commit
Memory use reduction when commit-slab facility is used to annotate
sparsely (which is not recommended in the first place).
* jc/commit-slab:
commit-slab: introduce slabname##_peek() function
Add a new configuration variable to enable "--follow" automatically
when "git log" is run with one pathspec argument.
* dt/log-follow-config:
log: add "log.follow" configuration variable
Teach "git status" to show a more detailed information regarding
the "rebase -i" session in progress.
* gp/status-rebase-i-info:
status: add new tests for status during rebase -i
status: give more information during rebase -i
status: differentiate interactive from non-interactive rebases
status: factor two rebase-related messages together
"cat-file" learned "--batch-all-objects" option to enumerate all
available objects in the repository more quickly than "rev-list
--all --objects" (the output includes unreachable objects, though).
* jk/cat-file-batch-all:
cat-file: sort and de-dup output of --batch-all-objects
cat-file: add --batch-all-objects option
cat-file: split batch_one_object into two stages
cat-file: stop returning value from batch_one_object
cat-file: add --buffer option
cat-file: move batch_options definition to top of file
cat-file: minor style fix in options list
Allow ignoring fsck errors on specific set of known-to-be-bad
objects, and also tweaking warning level of various kinds of non
critical breakages reported.
* js/fsck-opt:
fsck: support ignoring objects in `git fsck` via fsck.skiplist
fsck: git receive-pack: support excluding objects from fsck'ing
fsck: introduce `git fsck --connectivity-only`
fsck: support demoting errors to warnings
fsck: document the new receive.fsck.<msg-id> options
fsck: allow upgrading fsck warnings to errors
fsck: optionally ignore specific fsck issues completely
fsck: disallow demoting grave fsck errors to warnings
fsck: add a simple test for receive.fsck.<msg-id>
fsck: make fsck_tag() warn-friendly
fsck: handle multiple authors in commits specially
fsck: make fsck_commit() warn-friendly
fsck: make fsck_ident() warn-friendly
fsck: report the ID of the error/warning
fsck (receive-pack): allow demoting errors to warnings
fsck: offer a function to demote fsck errors to warnings
fsck: provide a function to parse fsck message IDs
fsck: introduce identifiers for fsck messages
fsck: introduce fsck options
Clean up refs API and make "git clone" less intimate with the
implementation detail.
* mh/init-delete-refs-api:
delete_ref(): use the usual convention for old_sha1
cmd_update_ref(): make logic more straightforward
update_ref(): don't read old reference value before delete
check_branch_commit(): make first parameter const
refs.h: add some parameter names to function declarations
refs: move the remaining ref module declarations to refs.h
initial_ref_transaction_commit(): check for ref D/F conflicts
initial_ref_transaction_commit(): check for duplicate refs
refs: remove some functions from the module's public interface
initial_ref_transaction_commit(): function for initial ref creation
repack_without_refs(): make function private
prune_refs(): use delete_refs()
prune_remote(): use delete_refs()
delete_refs(): bail early if the packed-refs file cannot be rewritten
delete_refs(): make error message more generic
delete_refs(): new function for the refs API
delete_ref(): handle special case more explicitly
remove_branches(): remove temporary
delete_ref(): move declaration to refs.h
Reimplement 'git pull' in C.
* pt/pull-builtin:
pull: remove redirection to git-pull.sh
pull --rebase: error on no merge candidate cases
pull --rebase: exit early when the working directory is dirty
pull: configure --rebase via branch.<name>.rebase or pull.rebase
pull: teach git pull about --rebase
pull: set reflog message
pull: implement pulling into an unborn branch
pull: fast-forward working tree if head is updated
pull: check if in unresolved merge state
pull: support pull.ff config
pull: error on no merge candidates
pull: pass git-fetch's options to git-fetch
pull: pass git-merge's options to git-merge
pull: pass verbosity, --progress flags to fetch and merge
pull: implement fetch + merge
pull: implement skeletal builtin pull
argv-array: implement argv_array_pushv()
parse-options-cb: implement parse_opt_passthru_argv()
parse-options-cb: implement parse_opt_passthru()
Enhance packet tracing machinery to allow capturing an incoming
pack data to a file for debugging.
* jk/pkt-log-pack:
pkt-line: support tracing verbatim pack contents
pkt-line: tighten sideband PACK check when tracing
pkt-line: simplify starts_with checks in packet tracing
"git rebase -i"'s list of todo is made configurable.
* mr/rebase-i-customize-insn-sheet:
git-rebase--interactive.sh: add config option for custom instruction format
"git send-email" now performs alias-expansion on names that are
given via --cccmd, etc.
This round comes with a lot more enhanced e-mail address parser,
which makes it a bit scary, but as long as it works as designed, it
makes it wonderful ;-).
* rl/send-email-aliases:
send-email: suppress meaningless whitespaces in from field
send-email: allow multiple emails using --cc, --to and --bcc
send-email: consider quote as delimiter instead of character
send-email: reduce dependencies impact on parse_address_line
send-email: minor code refactoring
send-email: allow use of aliases in the From field of --compose mode
send-email: refactor address list process
t9001-send-email: refactor header variable fields replacement
send-email: allow aliases in patch header and command script outputs
t9001-send-email: move script creation in a setup test
Running an aliased command from a subdirectory when the .git thing
in the working tree is a gitfile pointing elsewhere did not work.
* nd/export-worktree:
setup: set env $GIT_WORK_TREE when work tree is set, like $GIT_DIR
Replace "is this subdirectory a separate repository that should not
be touched?" check "git clean" does by checking if it has .git/HEAD
using the submodule-related code with a more optimized check.
* ee/clean-remove-dirs:
read_gitfile_gently: fix use-after-free
clean: improve performance when removing lots of directories
p7300: add performance tests for clean
t7300: add tests to document behavior of clean and nested git
setup: sanity check file size in read_gitfile_gently
setup: add gentle version of read_gitfile
Move machinery to parse human-readable scaled numbers like 1k, 4M,
and 2G as an option parameter's value from pack-objects to
parse-options API, to make it available to other codepaths.
* cb/parse-magnitude:
parse-options: move unsigned long option parsing out of pack-objects.c
test-parse-options: update to handle negative ints
"git verify-tag" and "git verify-commit" have been taught to share
more code, and then learned to optionally show the verification
message from the underlying GPG implementation.
* bc/gpg-verify-raw:
verify-tag: add option to print raw gpg status information
verify-commit: add option to print raw gpg status information
gpg: centralize printing signature buffers
gpg: centralize signature check
verify-commit: add test for exit status on untrusted signature
verify-tag: share code with verify-commit
verify-tag: add tests
Various enhancements around "git am" reading patches generated by
foreign SCM.
* pt/am-foreign:
am: teach mercurial patch parser how to read from stdin
am: use gmtime() to parse mercurial patch date
t4150: test applying StGit series
am: teach StGit patch parser how to read from stdin
t4150: test applying StGit patch
GSoC project to rebuild ref listing by branch and tag based on the
for-each-ref machinery. This is its first part.
* kn/for-each-ref:
ref-filter: make 'ref_array_item' use a FLEX_ARRAY for refname
for-each-ref: introduce filter_refs()
ref-filter: move code from 'for-each-ref'
ref-filter: add 'ref-filter.h'
for-each-ref: rename variables called sort to sorting
for-each-ref: rename some functions and make them public
for-each-ref: introduce 'ref_array_clear()'
for-each-ref: introduce new structures for better organisation
for-each-ref: rename 'refinfo' to 'ref_array_item'
for-each-ref: clean up code
for-each-ref: extract helper functions out of grab_single_ref()
Add an environment variable to tell Git to look into refs hierarchy
other than refs/replace/ for the object replacement data.
* mh/replace-refs:
Allow to control where the replace refs are looked for
Abandoning an already applied change in "git rebase -i" with
"--continue" left CHERRY_PICK_HEAD and confused later steps.
* js/rebase-i-clean-up-upon-continue-to-skip:
rebase -i: do not leave a CHERRY_PICK_HEAD file behind
t3404: demonstrate CHERRY_PICK_HEAD bug
Various fixes around "git am" that applies a patch to a history
that is not there yet.
* pt/am-abort-fix:
am --abort: keep unrelated commits on unborn branch
am --abort: support aborting to unborn branch
am --abort: revert changes introduced by failed 3way merge
am --skip: support skipping while on unborn branch
am -3: support 3way merge on unborn branch
am --skip: revert changes introduced by failed 3way merge
"git for-each-ref" reported "missing object" for 0{40} when it
encounters a broken ref. The lack of object whose name is 0{40} is
not the problem; the ref being broken is.
* mh/reporting-broken-refs-from-for-each-ref:
read_loose_refs(): treat NULL_SHA1 loose references as broken
read_loose_refs(): simplify function logic
for-each-ref: report broken references correctly
t6301: new tests of for-each-ref error handling
"git commit --cleanup=scissors" was not careful enough to protect
against getting fooled by a line that looked like scissors.
* sg/commit-cleanup-scissors:
commit: cope with scissors lines in commit message
Introduce filter_refs() which will act as an API for filtering
a set of refs. Based on the type of refs the user has requested,
we iterate through those refs and apply filters as per the
given ref_filter structure and finally store the filtered refs
in the ref_array structure.
Currently this will wrap around ref_filter_handler(). Hence,
ref_filter_handler is made file scope static.
As users of this API will no longer send a ref_filter_cbdata
structure directly, we make the elements of ref_filter_cbdata
pointers. We can now use the information given by the users
to obtain our own ref_filter_cbdata structure. Changes are made to
support the change in ref_filter_cbdata structure.
Make 'for-each-ref' use this API.
Helped-by: Junio C Hamano <gitster@pobox.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move most of the code from 'for-each-ref' to 'ref-filter' to make
it publicly available to other commands, this is to unify the code
of 'tag -l', 'branch -l' and 'for-each-ref' so that they can share
their implementations with each other.
Add 'ref-filter' to the Makefile, this completes the movement of code
from 'for-each-ref' to 'ref-filter'.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add Ray Chen as member of zh_CN l10n team member, and move other
inactive zh_CN l10n team members to the header of zh_CN.po.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Remove a check that would disable the untracked cache for sparse
checkouts. Add tests that ensure that the untracked cache works with
sparse checkouts -- specifically considering the case that a file
foo/bar is checked out, but foo/.gitignore is not.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now update_ref (via write_pseudoref) does almost exactly what
write_cherry_pick_head did, so we can remove write_cherry_pick_head
and just use update_ref.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of manually writing a pseudoref (in one case) and shelling out
to git update-ref (in another), use the update_ref function. This
is much simpler.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pseudorefs should not be updated through the ref transaction
API, because alternate ref backends still need to store pseudorefs
in GIT_DIR (instead of wherever they store refs). Instead,
change update_ref and delete_ref to call pseudoref-specific
functions.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function ref_type, which categorizes refs as per-worktree,
pseudoref, or normal ref.
Later, we will use this in refs.c to treat pseudorefs specially.
Alternate ref backends may use it to treat both pseudorefs and
per-worktree refs differently.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add glossary entries for both concepts.
Pseudorefs and per-worktree refs do not yet have special handling,
because the files refs backend already handles them correctly. Later,
we will make the LMDB backend call out to the files backend to handle
per-worktree refs.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to call it if value is the empty string. This also
eliminates code duplication.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for splitting a whitespace-separated list of values in
"remotes.<name>" had an off-by-one error that caused it to skip over
remotes whose names consist of a single character.
Also remove unnecessary braces.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we unpack trees into an existing index, we discard the old
index and replace it with the new, merged index. Ensure that this
index has its cache-tree populated. This will make subsequent git
status and commit commands faster.
Signed-off-by: Brian Degenhardt <bmd@bmdhacks.com>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to approxidate-style values ("2.months.ago", "yesterday"),
consumers of 'gc.*expire*' configuration variables also accept and
respect 'now' ("do it immediately") and 'never' ("suppress entirely").
Suggested-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When Git was young, people looking for third-party Git-related tools
came to the Git project itself to find them, so it made sense to
maintain a list of tools here. These days, however, search engines fill
that role much more efficiently, so retire the manually-maintained
list.
The list of front-ends and tools on the Git wiki rates perhaps a distant
second to search engines, and may still have value, so retain a
reference to it.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cogito -- unmaintained since late 2006[1]
pg -- URL dead; web searches reveal no information
quilt2git -- URL dead; web searches reveal no information
(h)gct -- URL dead; no repository activity since 2007[2]
[1]: http://git.or.cz/cogito/
[2]: http://repo.or.cz/w/hgct.git
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Descriptive text for each tool item is incorrectly formatted using a
fixed width font. Fix formatting to use a variable width font by
unindenting the item text.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These days, the best way to find Git-related tools is via a search
engine. The Git wiki may be a distant second, and git-tools.txt falls in
last place. Therefore, promote the Git wiki reference to the top of
git-tools.txt so the reader will encounter it first, rather than hiding
it away at the very bottom.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The descriptions for receive.hideRefs and
uploadpack.hideRefs are largely the same, and then
transfer.hideRefs refers to both of them. Instead, let's
make transfer.hideRefs the "master" source, and refer to it
from the other sites (with appropriate program-specific
annotations).
This avoids duplication, and will make it easier to document
changes to the config option without having to copy and
paste the description in two places.
While we're at it, this fixes some bogus subject/verb
agreement in the original description.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alternate refs backends might store reflogs somewhere other than
.git/logs. Change most test code that directly accesses .git/logs to
instead use git reflog commands.
There are still a few tests which need direct access to reflogs: to
check reflog permissions, to manually create reflogs from scratch, to
save/restore reflogs, to check the format of raw reflog data, and to
remove not just reflog contents, but the reflogs themselves. All cases
which don't need direct access have been modified.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove unnecessary reflog manipulation. The test does not rely in any
way on this reflog manipulation, and the case that the test
exercises is unrelated to reflogs.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A fix to a minor regression to "git fsck" in v2.2 era that started
complaining about a body-less tag object when it lacks a separator
empty line after its header to separate it with a non-existent body.
* jc/fsck-retire-require-eoh:
fsck: it is OK for a tag and a commit to lack the body
We used to ask libCURL to use the most secure authentication method
available when talking to an HTTP proxy only when we were told to
talk to one via configuration variables. We now ask libCURL to
always use the most secure authentication method, because the user
can tell libCURL to use an HTTP proxy via an environment variable
without using configuration variables.
* et/http-proxyauth:
http: always use any proxy auth method available
When you say "!<ENTER>" while running say "git log", you'd confuse
yourself in the resulting shell, that may look as if you took
control back to the original shell you spawned "git log" from but
that isn't what is happening. To that new shell, we leaked
GIT_PAGER_IN_USE environment variable that was meant as a local
communication between the original "Git" and subprocesses that was
spawned by it after we launched the pager, which caused many
"interesting" things to happen, e.g. "git diff | cat" still paints
its output in color by default.
Stop leaking that environment variable to the pager's half of the
fork; we only need it on "Git" side when we spawn the pager.
* jc/unexport-git-pager-in-use-in-pager:
pager: do not leak "GIT_PAGER_IN_USE" to the pager
"git config" failed to update the configuration file when the
underlying filesystem is incapable of renaming a file that is still
open.
* kb/config-unmap-before-renaming:
config.c: fix writing config files on Windows network shares
A minor bugfix when pack bitmap is used with "rev-list --count".
* jk/rev-list-no-bitmap-while-pruning:
rev-list: disable --use-bitmap-index when pruning commits
An ancient test framework enhancement to allow color was not
entirely correct; this makes it work even when tput needs to read
from the ~/.terminfo under the user's real HOME directory.
* rh/test-color-avoid-terminfo-in-original-home:
test-lib.sh: fix color support when tput needs ~/.terminfo
Revert "test-lib.sh: do tests for color support after changing HOME"
"git rebase" did not exit with failure when format-patch it invoked
failed for whatever reason.
* cb/rebase-am-exit-code:
rebase: return non-zero error code if format-patch fails
Disable "have we lost a race with competing repack?" check while
receiving a huge object transfer that runs index-pack.
* jk/index-pack-reduce-recheck:
index-pack: avoid excessive re-reading of pack directory
Loosen restrictions on refspecs by allowing patterns that have a "*"
within a component instead of only as the whole component.
Remove the logic to accept a single "*" as a whole component from
check_refname_format(), and implement an extended form of that logic
in check_refname_component(). Pass the pointer to the flags argument
to the latter, as it has to clear REFNAME_REFSPEC_PATTERN bit when
it sees "*".
Teach check_refname_component() function to allow an asterisk "*"
only when REFNAME_REFSPEC_PATTERN is set in the flags, and drop the
bit after seeing a "*", to ensure that one side of a refspec
contains at most one asterisk.
This will allow us to accept refspecs such as `for/bar*:foo/baz*`.
Any refspec which functioned before shall continue functioning with
the new logic.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correctly specify all characters which are rejected under the '4: a
bad character' disposition, which did not list all characters that
are treated as such.
Cleanup comment style for rejected refs by inserting a ", or" at the
end of each statement.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* "tag object" translated as "标签对象".
* "objects to be packed" translated as "待打包对象".
* Add "那些", for better reading experience.
Signed-off-by: Ray Chen <oldsharp@gmail.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Cogito hasn't been maintained since late 2006, so drop the reference
to it. The warning that SCMS front-ends might override listed
environment variables, however, may still be valuable, so keep it but
generalize the wording.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit d96a275b91.
It used to be possible to apply a patch series with "git am mbox"
and then only after seeing a failure, switch to three-way mode via
"git am -3" (no other options or arguments). The commit being
reverted broke this workflow.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-subtree's log format string uses "%ad" and "%cd", which
respect the user's configured log.date value.
This is problematic for git-subtree because it needs to use real
dates so that copied commits come through unchanged.
Add a test and tweak the format strings to use %aD and %cD
so that the default date format is used instead.
Reported-by: Bryan Jacobs <b@q3q.us>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for Fountain, a plain text screenplay format. Git
facilitates not just programming specifically, but creative writing
in general, so it makes sense to also support other plain text
documents besides source code.
In the structure of a screenplay specifically, scenes are roughly
analogous to functions, in the sense that it makes your job easier
if you can see which ones were changed in a given range of patches.
More information about the Fountain format can be found on its
official website, at http://fountain.io .
Signed-off-by: Zoë Blade <zoe@bytenoise.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If HEAD of a repository points to a conflict reference, such as:
* There exist a reference named 'refs/heads/jx/feature1', but HEAD
points to 'refs/heads/jx', or
* There exist a reference named 'refs/heads/feature', but HEAD points
to 'refs/heads/feature/bad'.
When we push to delete a reference for this repo, such as:
git push /path/to/bad-head-repo.git :some/good/reference
The git-receive-pack process will crash.
This is because if HEAD points to a conflict reference, the function
`resolve_refdup("HEAD", ...)` does not return a valid reference name,
but a null buffer. Later matching the delete reference against the null
buffer will cause git-receive-pack crash.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase learned to stash changes when it encounters a dirty work tree,
but git pull --rebase does not.
Only verify if the working tree is dirty when rebase.autostash is not
enabled.
Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-send-pack is exec'ed, as is done by git-remote-http, it
does not read the config, and configured value of user.signingkey is
ignored. Thus it was impossible to specify a signing key over HTTP,
other than the default key in the keyring having a User ID matching
the "Name <email>" format.
This patch at least partially fixes the problem by reading in the GPG
config from within send-pack. It does not address the related problem
of plumbing a value for this configuration option using
`git -c user.signingkey push ...`.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in support of alternate ref backends which don't necessarily
store reflogs as files.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the creation of a ref (e.g. stash) with a reflog already in
place. For most refs (e.g. those under refs/heads), this happens
automatically, but for others, we need this option.
Currently, git does this by pre-creating the reflog, but alternate ref
backends might store reflogs somewhere other than .git/logs. Code
that now directly manipulates .git/logs should instead use git
plumbing commands.
I also added --create-reflog to git tag, just for completeness.
In a moment, we will use this argument to make git stash work with
alternate ref backends.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a flag to allow forcing the creation of a reflog even if the ref
name and core.logAllRefUpdates setting would not ordinarily cause ref
creation.
In a moment, we will use this to add options to git tag and git
update-ref to force reflog creation.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is necessary because alternate ref backends might store reflogs
somewhere other than .git/logs. Code that now directly manipulates
.git/logs should instead go through git-reflog.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The safe_create_reflog function creates a reflog, if it does not
already exist.
The log_ref_setup function becomes private and gains a force_create
parameter to force the creation of a reflog even if log_all_ref_updates
is false or the refname is not one of the special refnames.
The new parameter also reduces the need to store, modify, and restore
the log_all_ref_updates global before reflog creation.
In a moment, we will use this to add reflog creation commands to
git-reflog.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an err argument to log_ref_setup that can explain the reason
for a failure. This then eliminates the need to manage errno through
this function since we can just add strerror(errno) to the err string
when meaningful. No callers relied on errno from this function for
anything else than the error message.
Also add err arguments to private functions write_ref_to_lockfile,
log_ref_write_1, commit_ref_update. This again eliminates the need to
manage errno in these functions.
Some error messages are slightly reordered.
Update of a patch by Ronnie Sahlberg.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't update files in the worktree from cache entries which are
flagged with CE_WT_REMOVE.
When a user does a sparse checkout, git removes files that are
marked with CE_WT_REMOVE (because they are out-of-scope for the
sparse checkout). If those files are also marked CE_UPDATE (for
instance, because they differ in the branch that is being checked
out and the outgoing branch), git would previously recreate them.
This patch prevents them from being recreated.
These erroneously-created files would also interfere with merges,
causing pre-merge revisions of out-of-scope files to appear in the
worktree.
apply_sparse_checkout() is the function where all "action"
manipulation (add, delete, update files..) for sparse checkout
occurs; it should not ask to delete and update both at the same
time.
Signed-off-by: Anatole Shaw <git-devel@omni.poc.net>
Signed-off-by: David Turner <dturner@twopensource.com>
Helped-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value of strftime is poorly designed; when it
returns 0, the caller cannot tell if the buffer was not
large enough, or if the output was actually 0 bytes. In the
original implementation of strbuf_addftime, we simply punted
and guessed that our 128-byte hint would be large enough.
We can do better, though, if we're willing to treat strftime
like less of a black box. We can munge the incoming format
to make sure that it never produces 0-length output, and
then "fix" the resulting output. That lets us reliably grow
the buffer based on strftime's return value.
Clever-idea-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the untracked status indicator is enabled, __git_ps1() looks for
untracked files by running 'git ls-files'. This can be perceptibly slow
in case of an untracked directory containing lot of files, because it
lists all files found in the untracked directory only to be redirected
into /dev/null right away (this is the actual command run by __git_ps1()):
$ ls untracked-dir/ |wc -l
100000
$ time git ls-files --others --exclude-standard --error-unmatch \
-- ':/*' >/dev/null 2>/dev/null
real 0m0.955s
user 0m0.936s
sys 0m0.016s
Eliminate this delay by additionally passing the '--directory
--no-empty-directory' options to 'git ls-files' to show only the name of
non-empty untracked directories instead of all their content:
$ time git ls-files --others --exclude-standard --directory \
--no-empty-directory --error-unmatch -- ':/*' >/dev/null 2>/dev/null
real 0m0.010s
user 0m0.008s
sys 0m0.000s
This follows suit of ea95c7b8f5 (completion: improve untracked directory
filtering for filename completion, 2013-09-18).
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next commit will tweak the way __git_ps1() decides whether to display
the untracked files status indicator in the presence of untracked
directories. Add tests to make sure it doesn't change current behavior,
in particular that an empty untracked directory doesn't trigger the
untracked files status indicator.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that git-worktree no longer relies upon git-checkout for new branch
creation, new worktree HEAD set up, or initial worktree population,
git-checkout no longer needs intimate knowledge that it may be operating
in a newly created worktree. Therefore, drop 'new_worktree_mode' and the
private GIT_CHECKOUT_NEW_WORKTREE environment variable by which
git-worktree communicated to git-checkout that it was being invoked to
manipulate a new worktree.
This reverts the remaining changes to checkout.c by 529fef2 (checkout:
support checking out into a new working directory, 2014-11-30).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that git-worktree handles all functionality (--force, --detach,
-b/-B) previously delegated to git-checkout, actual population of the
new worktree can be accomplished more directly and lightweight with
"git reset --hard" in place of "git checkout".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that git-worktree sets HEAD explicitly to its final value via either
git-symbolic-ref or git-update-ref, rather than relying upon
git-checkout to do so, the "hack" for pacifying is_git_directory() with
a temporary HEAD, though still necessary, can be simplified.
Since the real HEAD is now populated with its proper final value, the
value of the temporary HEAD truly no longer matters, and any value which
looks like an object ID is good enough to satisfy is_git_directory().
Therefore, just set the temporary HEAD to a literal value rather than
going through the effort of resolving the current branch's HEAD.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-worktree currently conflates setting of HEAD in the new worktree and
initial worktree population into a single git-checkout invocation which
requires git-checkout to have special knowledge that it is operating on
a newly created worktree. The eventual goal is to rid git-checkout of
that overly-intimate knowledge.
Once these operations are separate, git-worktree will no longer be able
to delegate to git-branch the setting of the new worktree's HEAD to the
desired branch (or commit, if detached). Therefore, make git-worktree
itself responsible for setting up HEAD as either a symbolic reference,
if associated with a branch, or detached, if not.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-worktree currently conflates setting of HEAD in the new worktree
with initial worktree population via a single git-checkout invocation,
which requires git-checkout to have special knowledge that it is
operating in a newly created worktree. The eventual goal is to separate
these operations and rid git-checkout of that overly-intimate knowledge.
Once these operations are separate, git-worktree will no longer be able
to rely upon git-branch to determine the state of the worktree (branch
name or detached), or to check for error conditions, such as the
requested branch already checked out elsewhere, or an invalid reference.
Therefore, imbue git-worktree with the intelligence to determine a
branch name or detached state locally, and to perform error checking on
its own.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The caller of add_worktree() provides it with a command to invoke to
populate the new worktree. This was a useful abstraction during the
conversion of "git checkout --to" functionality to "git worktree add"
since git-checkout and git-worktree constructed the population command
differently. However, now that "git checkout --to" has been retired, and
add_worktree() has access to the options given to "worktree add", this
extra indirection is no longer useful and makes the code a bit
convoluted.
Moreover, the eventual goal is for git-worktree to make setting of HEAD
and worktree population distinct operations, whereas they are currently
conflated into a single git-checkout invocation. As such, add_worktree()
will eventually invoke other commands in addition to the worktree
population command, so it will be doing command construction itself
anyhow.
Therefore, relocate construction of the worktree population command from
add() to add_worktree().
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Take advantage of 'struct child_process.env' to make it obvious that
environment variables set by add_worktree() are intended specifically
for sub-commands it invokes to operate in the new worktree.
We assign a local 'struct argv_array' to child_process.env, rather than
utilizing the child_process.env_array 'struct argv_array', because
future patches will make add_worktree() invoke additional sub-commands,
and it's simpler to populate the environment array just once, whereas
child_process.env_array gets cleared after each invocation, thus would
require re-population for each sub-command.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-worktree currently conflates branch creation, setting of HEAD in the
new worktree, and worktree population into a single sub-invocation of
git-checkout, which requires git-checkout to be specially aware that it
is operating in a newly-created worktree. The goal is to free
git-checkout of that special knowledge, and to do so, git-worktree will
eventually perform those operations separately. Thus, as a first step,
rather than piggybacking on git-checkout's -b/-B ability to create a new
branch at checkout time, make git-worktree responsible for branch
creation itself.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix oversight where branch auto-vivication incorrectly kicks in when
--detach is specified and <branch> omitted. Instead, treat:
git worktree add --detach <path>
as shorthand for:
git worktree add --detach <path> HEAD
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Be consistent with git-checkout which disallows this (not particularly
meaningful) combination.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
add_worktree() will eventually need to deal with some options itself, so
introduce a structure into which options can be conveniently bundled,
and pass it along to add_worktree().
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make 'new_branch' be the name of the new branch for both forced and
non-forced cases; and add boolean 'force_new_branch' to indicate forced
branch creation. This will simplify logic later on when git-worktree
handles branch creation locally rather than delegating it to
git-checkout as part of the worktree population phase.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-worktree creates a new worktree, it reports:
Enter "<path>" (identifier <tag>)
which misleadingly implies that it is setting <path> as the working
directory (as if "cd <path>" had been invoked), whereas it's actually
preparing the new worktree by creating its administrative files, setting
HEAD, and populating it. Make this more clear by instead saying:
Preparing "<path>" (identifier <tag>)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-worktree currently conflates new branch creation, setting of HEAD in
the new wortkree, and worktree population into a single sub-invocation
of git-checkout. However, these operations will eventually be separated,
and git-worktree itself will need to be able to detect if the branch is
already checked out elsewhere, rather than relying upon git-branch to
make this determination, so publish die_if_checked_out().
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check_linked_checkout() only understands symref-style HEAD (i.e. "ref:
refs/heads/master"), however, HEAD may also be a an actual symbolic link
(on platforms which support it). To accurately detect if a branch is
checked out elsewhere, it needs to handle symbolic link HEAD, as well.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check_linked_checkout() only understands symref-style HEAD (i.e. "ref:
refs/heads/master"), however, HEAD may also be a an actual symbolic link
(on platforms which support it), thus it will need to check that style
HEAD, as well (via readlink()). As a preparatory step, simplify parsing
of symref-style HEAD so the actual branch check can be re-used easily
for symbolic links (in an upcoming patch).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When check_linked_checkout() discovers that the branch is already
checked out elsewhere, it emits the diagnostic:
'blorp' is already checked out at '/some/path/.git'
which is misleading since "checked out at" implies the working tree, but
".git" is the location of the repository administrative files. Fix by
dropping ".git" from the message.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plan is to publish die_if_checked_out() so that callers other than
git-checkout can take advantage of it, however, those callers won't have
access to git-checkout's "struct branch_info". Therefore, change it to
accept the full name of the branch as a simple string instead.
While here, also give the argument a more meaningful name ("branch"
instead of "new").
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no reason to keep the strbuf active long after its last use.
By releasing it as early as possible, resource management is simplified
and there is less worry about future changes resulting in a leak.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
die_if_checked_out() is intended to check if the branch about to be
checked out is already checked out either in the main worktree or in a
linked worktree. However, if .git/worktrees directory does not exist,
then it never bothers checking the main worktree, even though the
specified branch might indeed be checked out there, which is fragile
behavior.
This hasn't been a problem in practice since the current implementation
of "git worktree add" (and, earlier, "git checkout --to") always creates
.git/worktrees before die_if_checked_out() is called by the child "git
checkout" invocation which populates the new worktree.
However, git-worktree will eventually want to call die_if_checked_out()
itself rather than only doing so indirectly as a side-effect of invoking
git-checkout, and reliance upon order of operations (creating
.git/worktrees before checking if a branch is already checked out) is
fragile. As a general function, callers should not be expected to abide
by this undocumented and unwarranted restriction. Therefore, make
die_if_checked_out() more robust by checking the main worktree whether
.git/worktrees exists or not.
While here, also move a comment explaining why die_if_checked_out()'s
helper parses HEAD manually. Such information resides more naturally
with the helper itself rather than at its first point of call.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check_linked_checkouts() doesn't just "check" linked checkouts for
"something"; specifically, it aborts the operation if the branch about
to be checked out is already checked out elsewhere. Therefore, rename it
to die_if_checked_out() to give a better indication of its function.
The more meaningful name will be particularly important when this
function is later published for use by other callers.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --ignore-other-worktree is specified, we unconditionally skip the
check to see if the requested branch is already checked out in a linked
worktree. Since we know that we will be skipping that check, there is no
need to resolve HEAD in order to detect other conditions under which we
may skip the check.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of df0b6cf (worktree: new place for "git prune --worktrees",
2015-06-29), linked worktree pruning functionality moved from
"git prune --worktrees" to "git worktree prune". Rename the
associated configuration variable accordingly.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should have been changed to "git worktree prune" by df0b6cf
(worktree: new place for "git prune --worktrees", 2015-06-29)
[es: reword commit message]
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The administrative file to suppress pruning is named "locked", not "lock".
[es: don't touch unrelated "git worktree lock" command; reword commit
message]
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes linked working trees were called "linked working
directories" or "linked worktrees". Always refer to them as "linked
working trees" for consistency.
[es: fix additional occurrences]
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07), git-am
supported the --utf8 and --no-utf8 options, and if set, would pass the
-u flag and the -k flag respectively.
git mailinfo -u will re-code the commit log message and authorship info
in the charset specified by i18n.commitencoding setting, while
git mailinfo -n will disable the re-coding.
Since d84029b (--utf8 is now default for 'git-am', 2007-01-08), --utf8
is set by default in git-am.
Add various encoding conversion tests to t3901 to test git-mailinfo's
encoding conversion. In addition, add a test for --no-utf8 to check that
no encoding conversion will occur if that option is set.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Reviewed-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 8389b52 (git-rerere: reuse recorded resolve., 2006-01-28), git-am
will call git-rerere to re-use recorded merge conflict resolutions if
any occur in a threeway merge.
Add a test to ensure that git-rerere is called by git-am (which handles
the non-interactive rebase).
Reviewed-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 017678b (am/mailinfo: Disable scissors processing by default,
2009-08-26), git-am supported the --[no-]scissors option, passing it to
git-mailinfo.
Add tests to ensure that git-am will pass the --scissors option to
git-mailinfo, and that --no-scissors will override the configuration
setting of mailinfo.scissors.
Reviewed-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07),
git-am.sh will invoke the post-applypatch hook after the patch is
applied and a commit is made. The exit code of the hook is ignored.
Add tests for this hook.
Helped-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07),
git-am.sg will invoke the pre-applypatch hook after applying the patch
to the index, but before a commit is made. Should the hook exit with a
non-zero status, git am will exit.
Add tests for this hook.
Helped-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07), git-am
will invoke the applypatch-msg hooks just after extracting the patch
message. If the applypatch-msg hook exits with a non-zero status, git-am
abort before even applying the patch to the index.
Add tests for this hook.
Helped-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c1d1128 (git-am --resolved: more usable error message.,
2006-04-28), git-am --resolved will check to see if there are any
unmerged entries, and will error out with a user-friendly error message
if there are.
Add a test for this.
Reviewed-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 6d28644 (git-am: do not allow empty commits by mistake.,
2006-02-23), git-am --resolved will check to see if the index has any
changes to prevent the user from creating an empty commit by mistake.
Add a test for this.
Reviewed-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c95b138 (Fix git-am safety checks, 2006-09-15), when there is a
session in progress, git-am will check the command-line arguments and
standard input to ensure that the user does not pass it any patches.
Add a test for this.
Reviewed-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 7b3b7e3 (am --abort: keep unrelated commits since the last failure
and warn, 2010-12-21), git-am --abort will not touch the index if on the
previous invocation, git-am failed because the index is dirty. This is
to ensure that the user's modifications to the index are not discarded.
Add a test for this.
Reviewed-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07), git-am
will ensure that the index is clean before applying the patch. This is
to prevent changes unrelated to the patch from being committed.
Add a test for this check.
Reviewed-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to POSIX specification uname(2) must return -1 on failure
and a non-negative value on success. Although many implementations
do return 0 on success it is valid to return any positive value for
success. In particular, Solaris returns 1.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update to the "linked checkout" in 2.5.0-rc1.
Instead of "checkout --to" that does not do what "checkout"
normally does, move the functionality to "git worktree add".
As this makes the end-user experience of the "worktree add" more or
less complete, I am tempted to say we should cook the other topic
that removes the internal "new-worktree-mode" hack from "checkout"
a bit longer in 'next', and release 2.5 final without that one.
* es/worktree-add:
Documentation/git: fix stale "MULTIPLE CHECKOUT MODE" reference
worktree: caution that this is still experimental
Documentation/git-worktree: fix stale "git checkout --to" references
This should have been changed by 93a3649 (Documentation: move linked
worktree description from checkout to worktree, 2015-07-06).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These should have been changed to "git worktree add" by fc56361
(worktree: introduce "add" command, 2015-07-06.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch --depth=<depth>" and "git clone --depth=<depth>" issued
a shallow transfer request even to an upload-pack that does not
support the capability.
* me/fetch-into-shallow-safety:
fetch-pack: check for shallow if depth given
"git fsck" used to ignore missing or invalid objects recorded in reflog.
* mh/fsck-reflog-entries:
fsck: report errors if reflog entries point at invalid objects
fsck_handle_reflog_sha1(): new function
The tcsh completion writes a bash scriptlet but that would have
failed for users with noclobber set.
* af/tcsh-completion-noclobber:
git-completion.tcsh: fix redirect with noclobber
Recent Mac OS X updates breaks the logic to detect that the machine
is on the AC power in the sample pre-auto-gc script.
* pa/auto-gc-mac-osx:
hooks/pre-auto-gc: adjust power checking for newer OS X
"git format-patch --ignore-if-upstream A..B" did not like to be fed
tags as boundary commits.
* jc/do-not-feed-tags-to-clear-commit-marks:
format-patch: do not feed tags to clear_commit_marks()
A line in the input to "rev-parse --parseopt" describes an option by
listing a short and/or long name, optional flags [*=?!], argument hint,
and then whitespace and help string.
We did not allow any of the [*=?!] characters in the argument hints.
The following input
pair=key=value equals sign in the hint
used to generate a help line like this:
--pair=key <value> equals sign in the hint
and used to expect "pair=key" as the argument name.
That is not very helpful as we generally do not want any of the [*=?!]
characters in the argument names. But we do want to use at least the
equals sign in the argument hints.
Update the parser to make long argument names stop at the first [*=?!]
character.
Add test case with equals sign in the argument hint and update the test
to perform all the operations in test_expect_success matching the
t/README requirements and allowing commands like
./t1502-rev-parse-parseopt.sh --run=1-2
to stop at the test case 2 without any further modification of the test
state area.
Signed-off-by: Ilya Bobyr <ilya.bobyr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update to the "linked checkout" in 2.5.0-rc1.
Instead of "checkout --to" that does not do what "checkout"
normally does, move the functionality to "git worktree add".
* es/worktree-add: (24 commits)
Revert "checkout: retire --ignore-other-worktrees in favor of --force"
checkout: retire --ignore-other-worktrees in favor of --force
worktree: add: auto-vivify new branch when <branch> is omitted
worktree: add: make -b/-B default to HEAD when <branch> is omitted
worktree: extract basename computation to new function
checkout: require worktree unconditionally
checkout: retire --to option
tests: worktree: retrofit "checkout --to" tests for "worktree add"
worktree: add -b/-B options
worktree: add --detach option
worktree: add --force option
worktree: introduce "add" command
checkout: drop 'checkout_opts' dependency from prepare_linked_checkout
checkout: make --to unconditionally verbose
checkout: prepare_linked_checkout: drop now-unused 'new' argument
checkout: relocate --to's "no branch specified" check
checkout: fix bug with --to and relative HEAD
Documentation/git-worktree: add EXAMPLES section
Documentation/git-worktree: add high-level 'lock' overview
Documentation/git-worktree: split technical info from general description
...
"git checkout [<tree-ish>] <paths>" spent unnecessary cycles
checking if the current branch was checked out elsewhere, when we
know we are not switching the branches ourselves.
* nd/multiple-work-trees:
worktree: new place for "git prune --worktrees"
checkout: don't check worktrees when not necessary
"git config" failed to update the configuration file when the
underlying filesystem is incapable of renaming a file that is still
open.
* kb/config-unmap-before-renaming:
config.c: fix writing config files on Windows network shares
When you say "!<ENTER>" while running say "git log", you'd confuse
yourself in the resulting shell, that may look as if you took
control back to the original shell you spawned "git log" from but
that isn't what is happening. To that new shell, we leaked
GIT_PAGER_IN_USE environment variable that was meant as a local
communication between the original "Git" and subprocesses that was
spawned by it after we launched the pager, which caused many
"interesting" things to happen, e.g. "git diff | cat" still paints
its output in color by default.
Stop leaking that environment variable to the pager's half of the
fork; we only need it on "Git" side when we spawn the pager.
* jc/unexport-git-pager-in-use-in-pager:
pager: do not leak "GIT_PAGER_IN_USE" to the pager
Abandoning an already applied change in "git rebase -i" with
"--continue" left CHERRY_PICK_HEAD and confused later steps.
* js/rebase-i-clean-up-upon-continue-to-skip:
rebase -i: do not leave a CHERRY_PICK_HEAD file behind
t3404: demonstrate CHERRY_PICK_HEAD bug
We used to ask libCURL to use the most secure authentication method
available when talking to an HTTP proxy only when we were told to
talk to one via configuration variables. We now ask libCURL to
always use the most secure authentication method, because the user
can tell libCURL to use an HTTP proxy via an environment variable
without using configuration variables.
* et/http-proxyauth:
http: always use any proxy auth method available
A fix to a minor regression to "git fsck" in v2.2 era that started
complaining about a body-less tag object when it lacks a separator
empty line after its header to separate it with a non-existent body.
* jc/fsck-retire-require-eoh:
fsck: it is OK for a tag and a commit to lack the body
When building a fast-import stream, it's easy to forget the fact
that for non-merge commits happening on top of the current branch
head, there is no need for a "from" command. That is corroborated by
the fact that at least git-p4, hg-fast-export and felipec's
git-remote-hg all unconditionally use a "from" command.
Unfortunately, giving a "from" command always resets the branch
tree, forcing it to be re-read, and in many cases, the pack is also
closed and reopened through gfi_unpack_entry. Both are unnecessary
overhead, and the latter is particularly slow at least on OSX.
Avoid resetting the tree when it's unmodified, and avoid calling
gfi_unpack_entry when the given mark points to the same commit as
the current branch head.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if a matched token is followed by a delimiter before advancing the
pointer arg. This avoids accepting composite words like "allnew" or
"defaultcontext" and misparsing them as "new" or "context".
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 0d1a151783.
When trying to switch to a different branch, that happens to be
checked out in another working tree, the user shouldn't have to
give up the other safety measures (like protecting the local changes
that overlap the difference between the branches) while defeating
the "no two checkouts of the same branch" safety.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During a 'rebase' (hence 'pull --rebase'), --ours/--theirs may
appear to be swapped to those who are not aware of the fact that
they are temporarily playing the role of the keeper of the more
authoritative history.
Add a note to clarify.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Simon A. Eugster <simon.eugster@eps.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase" did not exit with failure when format-patch it invoked
failed for whatever reason.
* cb/rebase-am-exit-code:
rebase: return non-zero error code if format-patch fails
A minor bugfix when pack bitmap is used with "rev-list --count".
* jk/rev-list-no-bitmap-while-pruning:
rev-list: disable --use-bitmap-index when pruning commits
Tests update in contrib/subtree.
* cb/subtree-tests-update:
contrib/subtree: small tidy-up to test
contrib/subtree: fix broken &&-chains and revealed test error
contrib/subtree: use tabs consitently for indentation in tests
An ancient test framework enhancement to allow color was not
entirely correct; this makes it work even when tput needs to read
from the ~/.terminfo under the user's real HOME directory.
* rh/test-color-avoid-terminfo-in-original-home:
test-lib.sh: fix color support when tput needs ~/.terminfo
Revert "test-lib.sh: do tests for color support after changing HOME"
The for_each_packed_object() API function did not iterate over
objects in a packfile that hasn't been used yet.
* jk/maint-for-each-packed-object:
for_each_packed_object: automatically open pack index
People who work on projects with mostly linear history with frequent
whole file renames may want to always use "git log --follow" when
inspecting the life of the content that live in a single path.
Teach the command to behave as if "--follow" was given from the
command line when log.follow configuration variable is set *and*
there is one (and only one) path on the command line.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we want to write out a loose object file, we have
always first made sure we don't already have the object
somewhere. Since 33d4221 (write_sha1_file: freshen existing
objects, 2014-10-15), we also update the timestamp on the
file, so that a simultaneous prune knows somebody is
likely to reference it soon.
If our utime() call fails, we treat this the same as not
having the object in the first place; the safe thing to do
is write out another copy. However, the loose-object check
accidentally inverts the utime() check; it returns failure
_only_ when the utime() call actually succeeded. Thus it was
failing to protect us there, and in the normal case where
utime() succeeds, it caused us to pointlessly write out and
link the object.
This passed our freshening tests, because writing out the
new object is certainly _one_ way of updating its utime. So
the normal case was inefficient, but not wrong.
While we're here, let's also drop a comment in front of the
check_and_freshen functions, making a note of their return
type (since it is not our usual "0 for success, -1 for
error").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since e481af06 (rebase: Handle cases where format-patch fails) we
notice if format-patch fails and return immediately from
git-rebase--am. We save the return value with ret=$?, but then we
return $?, which is usually zero in this case.
Fix this by returning $ret instead.
Cc: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Clemens Buchacher <clemens.buchacher@intel.com>
Helped-by: Jorge Nunes <jorge.nunes@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The term "index" is translated as "Staging-Area" to
match a majority of German books and to not confuse
Git beginners who don't know about Git's index.
"Staging Area" is used in German books as a thing where
content can be staged for commit. While the translation
is good for those kind of messages, it's bad for messages
that mean the Git index as the tree state or the index
file, in which case we should translate as "Index".
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Remove leading and trailing whitespaces in from field before
interepreting it to improve consistency with other options. The
split_addrs function already take care of trailing and leading
whitespaces for to, cc and bcc fields.
The from option now:
- has the same behavior when passing arguments like
" jdoe@example.com ", "\t jdoe@example.com " or
"jdoe@example.com".
- interprets aliases in string containing leading and trailing
whitespaces such as " alias" or "alias\t" like other options.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Accept a list of emails separated by commas in flags --cc, --to and
--bcc. Multiple addresses can already be given by using these options
multiple times, but it is more convenient to allow cutting-and-pasting
a list of addresses from the header of an existing e-mail message,
which already lists them as comma-separated list, as a value to a
single parameter.
The following format can now be used:
$ git send-email --to='Jane <jdoe@example.com>, mike@example.com'
Remove the limitation imposed by 79ee555b (Check and document the
options to prevent mistakes, 2006-06-21) which rejected every argument
with comma in --cc, --to and --bcc.
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_address_line had not the same behavior whether the user had
Mail::Address or not. Teach parse_address_line to behave like
Mail::Address.
When the user input is correct, this implementation behaves
exactly like Mail::Address except when there are quotes
inside the name:
"Jane Do"e <jdoe@example.com>
In this case the result of parse_address_line is:
With M::A : "Jane Do" e <jdoe@example.com>
Without : "Jane Do e" <jdoe@example.com>
When the user input is not correct, the behavior is also mostly
the same.
Unlike Mail::Address, this doesn't parse groups and recursive
commentaries.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a safeguard, checking out a branch already checked out by a different
worktree is disallowed. This behavior can be overridden with
--ignore-other-worktrees, however, this option is neither obvious nor
particularly discoverable. As a common safeguard override, --force is
more likely to come to mind. Therefore, overload it to also suppress the
check for a branch already checked out elsewhere.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a convenience, when <branch> is omitted from "git worktree <path>
<branch>" and neither -b nor -B is used, automatically create a new
branch named after <path>, as if "-b $(basename <path>)" was specified.
Thus, "git worktree add ../hotfix" creates a new branch named "hotfix"
and associates it with new worktree "../hotfix".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since a078f73 (git-am: add --message-id/--no-message-id, 2014-11-25),
the am.messageid setting determines whether the --message-id option is
set by default.
Add a test for this.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git status gives more information during rebase -i, about the list of
command that are done during the rebase. It displays the two last
commands executed and the two next lines to be executed. It also gives
hints to find the whole files in .git directory.
Signed-off-by: Guillaume Pagès <guillaume.pages@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a convenience, like "git branch" and "git checkout -b", make
"git worktree add -b <newbranch> <path> <branch>" default to HEAD when
<branch> is omitted.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent patch will also need to compute the basename of the new
worktree, so factor out this logic into a new function.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to allow linked worktree creation via "git checkout --to" from
a bare repository, 3473ad0 (checkout: don't require a work tree when
checking out into a new one, 2014-11-30) dropped git-checkout's
unconditional NEED_WORK_TREE requirement and instead performed worktree
setup conditionally based upon presence or absence of the --to option.
Now that --to has been retired and git-checkout is no longer responsible
for linked worktree creation, the NEED_WORK_TREE requirement can be
re-instated.
This effectively reverts 3473ad0, except for the tests it added which
now check bare repository behavior of "git worktree add" instead.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that "git worktree add" has achieved user-facing feature-parity with
"git checkout --to", retire the latter.
Move the actual linked worktree creation functionality,
prepare_linked_checkout() and its helpers, verbatim from checkout.c to
worktree.c.
This effectively reverts changes to checkout.c by 529fef2 (checkout:
support checking out into a new working directory, 2014-11-30) with the
exception of merge_working_tree() and switch_branches() which still
require specialized knowledge that a the checkout is occurring in a
newly-created linked worktree (signaled to them by the private
GIT_CHECKOUT_NEW_WORKTREE environment variable).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the introduction of "git worktree add", "git checkout --to" is
slated for removal. Therefore, retrofit linked worktree creation tests
to use "git worktree add" instead.
(The test to check exclusivity of "checkout --to" and "checkout <paths>"
is dropped altogether since it becomes meaningless with retirement of
"checkout --to".)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of git-worktree's roles is to populate the new worktree, much like
git-checkout, and thus, for convenience, ought to support several of the
same shortcuts. Toward this goal, add -b/-B options to create a new
branch and check it out in the new worktree.
(For brevity, only -b is mentioned in the synopsis; -B is omitted.)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of git-worktree's roles is to populate the new worktree, much like
git-checkout, and thus, for convenience, ought to support several of the
same shortcuts. Toward this goal, add a --detach option to detach HEAD
in the new worktree.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, "git worktree add" refuses to create a new worktree when
the requested branch is already checked out elsewhere. Add a --force
option to override this safeguard.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plan is to relocate "git checkout --to" functionality to "git
worktree add". As a first step, introduce a bare-bones git-worktree
"add" command along with documentation. At this stage, "git worktree
add" merely invokes "git checkout --to" behind the scenes, but an
upcoming patch will move the actual functionality
(checkout.c:prepare_linked_checkout() and its helpers) to worktree.c.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plan is to relocate "git checkout --to" functionality to "git
worktree add", however, worktree.c won't have access to the 'struct
checkout_opts' passed to prepare_linked_worktree(), which it consults
for the pathname of the new worktree and the argv[] of the command it
should run to populate the new worktree. Facilitate relocation of
prepare_linked_worktree() by instead having it accept the pathname and
argv[] directly, thus eliminating the final references to 'struct
checkout_opts'.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prepare_linked_checkout() respects git-checkout's --quiet flag, however,
the plan is to relocate "git checkout --to" functionality to "git
worktree add", and git-worktree does not (yet) have a --quiet flag.
Consequently, make prepare_linked_checkout() unconditionally verbose to
ease eventual code movement to worktree.c.
(A --quiet flag can be added to git-worktree later if there is demand
for it.)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only references to 'new' were folded out by the last two patches.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plan is to relocate "git checkout --to" functionality to "git
worktree add", however, this check expects a 'struct branch_info' which
git-worktree won't have at hand. It will, however, have access to its
own command-line from which it can pick up the branch name. Therefore,
as a preparatory step, rather than having prepare_linked_checkout()
perform this check, make it the caller's responsibility.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given "git checkout --to <path> HEAD~1", the new worktree's HEAD should
begin life at the current branch's HEAD~1, however, it actually ends up
at HEAD~2. This happens because:
1. git-checkout resolves HEAD~1
2. to satisfy is_git_directory(), prepare_linked_worktree() creates
a HEAD for the new worktree with the value of the resolved HEAD~1
3. git-checkout re-invokes itself with the same arguments within the
new worktree to populate the worktree
4. the sub git-checkout resolves HEAD~1 relative to its own HEAD,
which is the resolved HEAD~1 from the original invocation,
resulting unexpectedly and incorrectly in HEAD~2 (relative to the
original)
Fix this by unconditionally assigning the current worktree's HEAD as the
value of the new worktree's HEAD.
As a side-effect, this change also eliminates a dependence within
prepare_linked_checkout() upon 'struct branch_info'. The plan is to
eventually relocate "git checkout --to" functionality to "git worktree
add", and worktree.c won't have knowledge of 'struct branch_info', so
removal of this dependency is a step toward that goal.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to the (current) absence of a "git worktree lock" command, locking
a worktree's administrative files to prevent automatic pruning is a
manual task, necessarily requiring low-level understanding of linked
worktree functionality. However, this level of detail does not belong
in the high-level DESCRIPTION section, so add a generalized discussion
of locking to DESCRIPTION and move the technical information to DETAILS.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The DESCRIPTION section should provide a high-level overview of linked
worktree functionality to bring users up to speed quickly, without
overloading them with low-level details, so relocate the technical
information to a new DETAILS section.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Relocate submodule warning to BUGS and enumerate missing commands.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the git-worktree command exists, its documentation page is the
natural place for the linked worktree description to reside. Relocate
the "MULTIPLE WORKING TREES" description verbatim from git-checkout.txt
to git-worktree.txt.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-worktree options affect some worktree commands but not others, but
this is not necessarily obvious from the option descriptions. Make this
clear by indicating explicitly which commands are affected by which
options.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was missed when "git prune --worktrees" became "git worktree prune".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have proper documentation for --force's interaction with -d
and -m, we can avoid duplication and consider -M and -D as convenience
aliases for -m --force and -d --force.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --force option was modified in 356e91f (branch: allow -f with -m and
-d, 2014-12-08), but the documentation was not updated.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only change is a bugfix: the SMTP mailer was not working with
Python 2.4.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When c6458e60 (index-pack: kill union delta_base to save memory,
2015-04-18) attempted to reduce the memory footprint of index-pack,
one of the key thing it did was to keep track of ref-deltas and
ofs-deltas separately.
In fix_unresolved_deltas(), however it forgot that it now wants to
look only at ref deltas in one place. The code allocated an array
for nr_unresolved, which is sum of number of ref- and ofs-deltas
minus nr_resolved, which may be larger or smaller than the number
ref-deltas. Depending on nr_resolved, this was either under or over
allocating.
Also, the old code before this change had to use 'i' and 'n' because
some of the things we see in the (old) deltas[] array we scanned
with 'i' would not make it into the sorted_by_pos[] array in the old
world order, but now because you have only ref delta in a separate
ref_deltas[] array, they increment lock&step. We no longer need
separate variables. And most importantly, we shouldn't pass the
nr_unresolved parameter, as this number does not play a role in the
working of this helper function.
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is currently declared to return int, which could overflow for
large files.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 2e6c012e (setup_pager: set GIT_PAGER_IN_USE, 2011-08-17), we
export GIT_PAGER_IN_USE so that a process that becomes the upstream
of the spawned pager can still tell that we have spawned the pager
and decide to do colored output even when its output no longer goes
to a terminal (i.e. isatty(1)).
But we forgot to clear it from the enviornment of the spawned pager.
This is not a problem in a sane world, but if you have a handful of
thousands Git users in your organization, somebody is bound to do
strange things, e.g. typing "!<ENTER>" instead of 'q' to get control
back from $LESS. GIT_PAGER_IN_USE is still set in that subshell
spawned by "less", and all sorts of interesting things starts
happening, e.g. "git diff | cat" starts coloring its output.
We can clear the environment variable in the half of the fork that
runs the pager to avoid the confusion.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a "distributed" VCS, git should better define the encodings of its core
textual data structures, in particular those that are part of the network
protocol.
That git is encoding agnostic is only really true for blob objects. E.g.
the 'non-NUL bytes' requirement of tree and commit objects excludes
UTF-16/32, and the special meaning of '/' in the index file as well as
space and linefeed in commit objects eliminates EBCDIC and other non-ASCII
encodings.
Git expects bytes < 0x80 to be pure ASCII, thus CJK encodings that partly
overlap with the ASCII range are problematic as well. E.g. fmt_ident()
removes trailing 0x5C from user names on the assumption that it is ASCII
'\'. However, there are over 200 GBK double byte codes that end in 0x5C.
UTF-8 as default encoding on Linux and respective path translations in the
Mac and Windows versions have established UTF-8 NFC as de-facto standard
for path names.
Update the documentation in i18n.txt to reflect the current status-quo.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch --depth=<depth>" and "git clone --depth=<depth>" issued
a shallow transfer request even to an upload-pack that does not
support the capability.
* me/fetch-into-shallow-safety:
fetch-pack: check for shallow if depth given
Hotfix for an earlier change already in 'master' that broke the
default tool selection for mergetool.
* da/mergetool-winmerge:
mergetool-lib: fix default tool selection
The reachability bitmaps do not have enough information to
tell us which commits might have changed path "foo", so the
current code produces wrong answers for:
git rev-list --use-bitmap-index --count HEAD -- foo
(it silently ignores the "foo" limiter). Instead, we should
fall back to doing a normal traversal (it is OK to fall
back rather than complain, because --use-bitmap-index is a
pure optimization, and might not kick in for other reasons,
such as there being no bitmaps in the repository).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 28fcc0b (pathspec: avoid the need of "--" when wildcard is used -
2015-05-02) changes how the disambiguation rules work. This patch adds
some tests to demonstrate, basically, if wildcard characters are in an
argument:
- if the argument is valid extended sha-1 syntax, "--" must be used
- otherwise the argument is considered a path, even without "--"
And wildcard can appear in extended sha-1 syntax, either as part of
regex in ":/<regex>" or as the literal path in ":<path>". The latter
case is less likely to happen in real world. But if you do ":/" a lot,
you may need to type "--" more.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is sometimes useful for importers to be able to read the SHA-1
corresponding to a mark that they have created via fast-import. For
example, they might want to embed the SHA-1 into the commit message of
a later commit. Or it might be useful for internal bookkeeping uses,
or for logging.
Add a "get-mark" command to "git fast-import" that allows the importer
to ask for the value of a mark that has been created earlier.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--count should be mentioned in the usage guide, this updates code and
documentation.
Signed-off-by: Lawrence Siebert <lawrencesiebert@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check before the start of the rebasing if the commands exists, and for
the commands expecting a SHA-1, check if the SHA-1 is present and
corresponds to a commit. In case of error, print the error, stop git
rebase and prompt the user to fix with 'git rebase --edit-todo' or to
abort.
This allows to avoid doing half of a rebase before finding an error
and giving back what's left of the todo list to the user and prompt
him to fix when it might be too late for him to do so (he might have
to abort and restart the rebase).
Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if commits were removed (i.e. a line was deleted) and print
warnings or stop git rebase depending on the value of the
configuration variable rebase.missingCommitsCheck.
This patch gives the user the possibility to avoid silent loss of
information (losing a commit through deleting the line in this case)
if he wants.
Add the configuration variable rebase.missingCommitsCheck.
- When unset or set to "ignore", no checking is done.
- When set to "warn", the commits are checked, warnings are
displayed but git rebase still proceeds.
- When set to "error", the commits are checked, warnings are
displayed and the rebase is stopped.
(The user can then use 'git rebase --edit-todo' and
'git rebase --continue', or 'git rebase --abort')
rebase.missingCommitsCheck defaults to "ignore".
Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of removing a line to remove the commit, you can use the
command "drop" (just like "pick" or "edit"). It has the same effect as
deleting the line (removing the commit) except that you keep a visual
trace of your actions, allowing a better control and reducing the
possibility of removing a commit by mistake.
Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aliases were expanded before considering the From field of the
--compose option. This is inconsistent with other fields
(To, Cc, ...) which already support aliases.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify code by creating a function which transform a list of strings
containing email addresses (separated by commas, comporting aliases)
into a clean list of valid email addresses.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a function which replaces Date, Message-Id and
X-Mailer lines generated by git-send-email by a specific string:
Date:.*$ -> Date: DATE-STRING
Message-Id:.*$ -> Message-Id: MESSAGE-ID-STRING
X-Mailer:.*$ -> X-Mailer: X-MAILER-STRING
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Interpret aliases in:
- Header fields of patches generated by git format-patch
(using --to, --cc, --add-header for example) or
manually modified. Example of fields in header:
To: alias1
Cc: alias2
Cc: alias3
- Outputs of command scripts specified by --cc-cmd and
--to-cmd. Example of script:
#!/bin/sh
echo alias1
echo alias2
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Renaming to an existing file doesn't work on Windows network shares if the
target file is open.
munmap() the old config file before commit_lock_file.
Signed-off-by: Karsten Blees <blees@dcon.de>
Acked-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When skipping commits whose changes were already applied via `git rebase
--continue`, we need to clean up said file explicitly.
The same is not true for `git rebase --skip` because that will execute
`git reset --hard` as part of the "skip" handling in git-rebase.sh, even
before git-rebase--interactive.sh is called.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rev-list's --cherry option does not detect that a patch has already
been applied upstream, an interactive rebase would offer to reapply it and
consequently stop at that patch with a failure, mentioning that the diff
is empty.
Traditionally, a `git rebase --continue` simply skips the commit in such a
situation.
However, as pointed out by Gábor Szeder, this leaves a CHERRY_PICK_HEAD
behind, making the Git prompt believe that a cherry pick is still going
on. This commit adds a test case demonstrating this bug.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This feeds the format directly to strftime. Besides being a
little more flexible, the main advantage is that your system
strftime may know more about your locale's preferred format
(e.g., how to spell the days of the week).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for adding date modes that may carry extra
information beyond the mode itself, this patch converts the
date_mode enum into a struct.
Most of the conversion is fairly straightforward; we pass
the struct as a pointer and dereference the type field where
necessary. Locations that declare a date_mode can use a "{}"
constructor. However, the tricky case is where we use the
enum labels as constants, like:
show_date(t, tz, DATE_NORMAL);
Ideally we could say:
show_date(t, tz, &{ DATE_NORMAL });
but of course C does not allow that. Likewise, we cannot
cast the constant to a struct, because we need to pass an
actual address. Our options are basically:
1. Manually add a "struct date_mode d = { DATE_NORMAL }"
definition to each caller, and pass "&d". This makes
the callers uglier, because they sometimes do not even
have their own scope (e.g., they are inside a switch
statement).
2. Provide a pre-made global "date_normal" struct that can
be passed by address. We'd also need "date_rfc2822",
"date_iso8601", and so forth. But at least the ugliness
is defined in one place.
3. Provide a wrapper that generates the correct struct on
the fly. The big downside is that we end up pointing to
a single global, which makes our wrapper non-reentrant.
But show_date is already not reentrant, so it does not
matter.
This patch implements 3, along with a minor macro to keep
the size of the callers sane.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is more readable, and won't break if we ever change the
order of the date_mode enum.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We set CURLOPT_PROXYAUTH to use the most secure authentication
method available only when the user has set configuration variables
to specify a proxy. However, libcurl also supports specifying a
proxy through environment variables. In that case libcurl defaults
to only using the Basic proxy authentication method, because we do
not use CURLOPT_PROXYAUTH.
Set CURLOPT_PROXYAUTH to always use the most secure authentication
method available, even when there is no git configuration telling us
to use a proxy. This allows the user to use environment variables to
configure a proxy that requires an authentication method different
from Basic.
Signed-off-by: Enrique A. Tobis <etobis@twosigma.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function is called only from one place, which makes sure to have
`interesting_cache` not NULL. Additionally the variable is a
dereferenced a few lines before unconditionally, which would have
resulted in a segmentation fault before hitting this check.
Signed-off-by: Stefan Beller <sbeller@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 23af91d (prune: strategies for linked checkouts - 2014-11-30)
adds "--worktrees" to "git prune" without realizing that "git prune" is
for object database only. This patch moves the same functionality to a
new command "git worktree".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
When fsck validates a commit or a tag, it scans each line in the
header of the object using helper functions such as "start_with()",
etc. that work on a NUL terminated buffer, but before a1e920a0
(index-pack: terminate object buffers with NUL, 2014-12-08), the
validation functions were fed the object data in a piece of memory
that is not necessarily terminated with a NUL.
We added a helper function require_end_of_header() to be called at
the beginning of these validation functions to insist that the
object data contains an empty line before its end. The theory is
that the validating functions will notice and stop when it hits an
empty line as a normal end of header (or a required header line that
is missing) without scanning past the end of potentially not
NUL-terminated buffer.
But the theory forgot that in the older days, Git itself happily
created objects with only the header lines without a body. This
caused Git 2.2 and later to issue an unnecessary warning in some
existing repositories.
With a1e920a0, we do not need to require an empty line (or the body)
in these objects to safely parse and validate them. Drop the
offending "must have an empty line" check from this helper function,
while keeping the other check to make sure that there is no NUL in
the header part of the object, and adjust the name of the helper to
what it does accordingly.
Noticed-by: Wolfgang Denk <wd@denx.de>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thoroughly revise the "git bisect" manpage, including:
* Beef up the "Description" section.
* Make the first long example less specific to kernel development.
* De-emphasize implementation details in a couple of places.
* Add "(roughly N steps)" in the places where example output is shown.
* Properly markup code within the prose.
* Lots of wordsmithing.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the test case, we run setup_git_dir_gently() the first time to read
$GIT_DIR/config so that we can resolve aliases. We'll enter
setup_discovered_git_dir() and may or may not call set_git_dir() near
the end of the function, depending on whether the detected git dir is
".git" or not. This set_git_dir() will set env var $GIT_DIR.
For normal repo, git dir detected via setup_discovered_git_dir() will be
".git", and set_git_dir() is not called. If .git file is used however,
the git dir can't be ".git" and set_git_dir() is called and $GIT_DIR
set. This is the key of this problem.
If we expand an alias (or autocorrect command names), then
setup_git_dir_gently() is run the second time. If $GIT_DIR is not set in
the first run, we run the same setup_discovered_git_dir() as before.
Nothing to see. If it is, however, we'll enter setup_explicit_git_dir()
this time.
This is where the "fun" is. If $GIT_WORK_TREE is not set but
$GIT_DIR is, you are supposed to be at the root level of the
worktree. But if you are in a subdir "foo/bar" (real worktree's top
is "foo"), this rule bites you: your detected worktree is now
"foo/bar", even though the first run correctly detected worktree as
"foo". You get "internal error: work tree has already been set" as a
result.
Bottom line is, when $GIT_DIR is set, $GIT_WORK_TREE should be set too
unless there's no work tree. But setting $GIT_WORK_TREE inside
set_git_dir() may backfire. We don't know at that point if work tree is
already configured by the caller. So set it when work tree is
detected. It does not harm if $GIT_WORK_TREE is set while $GIT_DIR is
not.
Reported-by: Bjørnar Snoksrud <snoksrud@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sorting we could probably live without, but printing
duplicates is just a hassle for the user, who must then
de-dup themselves (or risk a wrong answer if they are doing
something like counting objects with a particular property).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "dir" variable is a pointer into the "buf" array. When
we hit the cleanup_return path, the first thing we do is
free(buf); but one of the error messages prints "dir", which
will access the memory after the free.
We can fix this by reorganizing the error path a little. We
act on the fatal, error-printing conditions first, as they
want to access memory and do not care about freeing. Then we
free any memory, and finally return.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The setup code used to die when core.bare and core.worktree are set
inconsistently, even for commands that do not need working tree.
* jk/die-on-bogus-worktree-late:
setup_git_directory: delay core.bare/core.worktree errors
There was a dead code that used to handle "git pull --tags" and
show special-cased error message, which was made irrelevant when
the semantics of the option changed back in Git 1.9 days.
* pt/pull-tags-error-diag:
pull: remove --tags error in no merge candidates case
"color.diff.plain" was a misnomer; give it 'color.diff.context' as
a more logical synonym.
* jk/color-diff-plain-is-context:
diff.h: rename DIFF_PLAIN color slot to DIFF_CONTEXT
diff: accept color.diff.context as a synonym for "plain"
The configuration reader/writer uses mmap(2) interface to access
the files; when we find a directory, it barfed with "Out of memory?".
* jk/diagnose-config-mmap-failure:
xmmap(): drop "Out of memory?"
config.c: rewrite ENODEV into EISDIR when mmap fails
config.c: avoid xmmap error messages
config.c: fix mmap leak when writing config
read-cache.c: drop PROT_WRITE from mmap of index
Recent "git prune" traverses young unreachable objects to safekeep
old objects in the reachability chain from them, which sometimes
caused error messages that are unnecessarily alarming.
* jk/squelch-missing-link-warning-for-unreachable:
suppress errors on missing UNINTERESTING links
silence broken link warnings with revs->ignore_missing_links
add quieter versions of parse_{tree,commit}
"git rebase -i" fired post-rewrite hook when it shouldn't (namely,
when it was told to stop sequencing with 'exec' insn).
* mm/rebase-i-post-rewrite-exec:
t5407: use <<- to align the expected output
rebase -i: fix post-rewrite hook with failed exec command
rebase -i: demonstrate incorrect behavior of post-rewrite
Since Perl 5.22, "A literal '{' should now be escaped in a pattern".
Silence the recently added warning by using \{ instead.
Signed-off-by: Christian Neukirchen <chneukirchen@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The improved ARRAY_SIZE macro uses BARF_UNLESS_AN_ARRAY which expands
to a valid check for recent gcc versions and to 0 for older gcc
versions but is not defined on non-gcc builds.
Non-gcc builds need this macro to expand to 0 as well. The current outer
test (defined(__GNUC__) && (__GNUC__ >= 3)) is a strictly weaker
condition than the inner test (GIT_GNUC_PREREQ(3, 1)) so we can omit the
outer test and cause the BARF_UNLESS_AN_ARRAY macro to be defined
correctly on non-gcc builds as well as gcc builds with older versions.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent Mac OS X updates breaks the logic to detect that the machine
is on the AC power in the sample pre-auto-gc script.
* pa/auto-gc-mac-osx:
hooks/pre-auto-gc: adjust power checking for newer OS X
More Perforce row number limit workaround for "git p4".
* ld/p4-changes-block-size:
git-p4: fixing --changes-block-size handling
git-p4: add tests for non-numeric revision range
git-p4: test with limited p4 server results
git-p4: additional testing of --changes-block-size
"git commit --cleanup=scissors" was not careful enough to protect
against getting fooled by a line that looked like scissors.
* sg/commit-cleanup-scissors:
commit: cope with scissors lines in commit message
Disable "have we lost a race with competing repack?" check while
receiving a huge object transfer that runs index-pack.
* jk/index-pack-reduce-recheck:
index-pack: avoid excessive re-reading of pack directory
The tcsh completion writes a bash scriptlet but that would have
failed for users with noclobber set.
* af/tcsh-completion-noclobber:
git-completion.tcsh: fix redirect with noclobber
"git for-each-ref" reported "missing object" for 0{40} when it
encounters a broken ref. The lack of object whose name is 0{40} is
not the problem; the ref being broken is.
* mh/reporting-broken-refs-from-for-each-ref:
read_loose_refs(): treat NULL_SHA1 loose references as broken
read_loose_refs(): simplify function logic
for-each-ref: report broken references correctly
t6301: new tests of for-each-ref error handling
Various fixes around "git am" that applies a patch to a history
that is not there yet.
* pt/am-abort-fix:
am --abort: keep unrelated commits on unborn branch
am --abort: support aborting to unborn branch
am --abort: revert changes introduced by failed 3way merge
am --skip: support skipping while on unborn branch
am -3: support 3way merge on unborn branch
am --skip: revert changes introduced by failed 3way merge
Hotfix for the 'untracked-cache' topic that is already in 'master'.
* nd/untracked-cache:
read-cache: fix untracked cache invalidation when split-index is used
"git fsck" used to ignore missing or invalid objects recorded in reflog.
* mh/fsck-reflog-entries:
fsck: report errors if reflog entries point at invalid objects
fsck_handle_reflog_sha1(): new function
Traditionally, external low-level 3-way merge drivers are expected
to produce their results based solely on the contents of the three
variants given in temporary files named by %O, %A and %B on their
command line. Additionally allow them to look at the final path
(given by %P).
* jc/ll-merge-expose-path:
ll-merge: pass the original path to external drivers
Auto-detect availability of getdelim() that helps optimized version
of strbuf_getwholeline().
* es/configure-getdelim:
configure: add getdelim() check
config.mak.uname: Darwin: define HAVE_GETDELIM for modern OS X releases
"git pull" has become more aware of the options meant for
underlying "git fetch" and then learned to use parse-options
parser.
* pt/pull-optparse:
pull: use git-rev-parse --parseopt for option parsing
pull: handle git-fetch's options as well
"git format-patch --ignore-if-upstream A..B" did not like to be fed
tags as boundary commits.
* jc/do-not-feed-tags-to-clear-commit-marks:
format-patch: do not feed tags to clear_commit_marks()
"git send-email" learned to handle more forms of sendmail style
aliases file.
* es/send-email-sendmail-alias:
send-email: further warn about unsupported sendmail aliases features
t9001: add sendmail aliases line continuation tests
t9001: refactor sendmail aliases test infrastructure
send-email: implement sendmail aliases line continuation support
send-email: simplify sendmail aliases comment and blank line recognizer
send-email: refactor sendmail aliases parser
send-email: fix style: cuddle 'elsif' and 'else' with closing brace
send-email: drop noise comments which merely repeat what code says
send-email: visually distinguish sendmail aliases parser warnings
send-email: further document missing sendmail aliases functionality
"git apply" cannot diagnose a patch corruption when the breakage is
to mark the length of the hunk shorter than it really is on the
hunk header line "@@ -l,k +m,n @@"; one special case it could is
when the hunk becomes no-op (e.g. k == n == 2 for two-line context
patch output), and it learned how to do so.
* jc/apply-reject-noop-hunk:
apply: reject a hunk that does not do anything
Identical to support in `git receive-pack for the config option
`receive.fsck.skiplist`, we now support ignoring given objects in
`git fsck` via `fsck.skiplist` altogether.
This is extremely handy in case of legacy repositories where it would
cause more pain to change incorrect objects than to live with them
(e.g. a duplicate 'author' line in an early commit object).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The optional new config option `receive.fsck.skipList` specifies the path
to a file listing the names, i.e. SHA-1s, one per line, of objects that
are to be ignored by `git receive-pack` when `receive.fsckObjects = true`.
This is extremely handy in case of legacy repositories where it would
cause more pain to change incorrect objects than to live with them
(e.g. a duplicate 'author' line in an early commit object).
The intended use case is for server administrators to inspect objects
that are reported by `git push` as being too problematic to enter the
repository, and to add the objects' SHA-1 to a (preferably sorted) file
when the objects are legitimate, i.e. when it is determined that those
problematic objects should be allowed to enter the server.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option avoids unpacking each and all blob objects, and just
verifies the connectivity. In particular with large repositories, this
speeds up the operation, at the expense of missing corrupt blobs,
ignoring unreachable objects and other fsck issues, if any.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have support in `git receive-pack` to deal with some legacy
repositories which have non-fatal issues.
Let's make `git fsck` itself useful with such repositories, too, by
allowing users to ignore known issues, or at least demote those issues
to mere warnings.
Example: `git -c fsck.missingEmail=ignore fsck` would hide
problems with missing emails in author, committer and tagger lines.
In the same spirit that `git receive-pack`'s usage of the fsck machinery
differs from `git fsck`'s – some of the non-fatal warnings in `git fsck`
are fatal with `git receive-pack` when receive.fsckObjects = true, for
example – we strictly separate the fsck.<msg-id> from the
receive.fsck.<msg-id> settings.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'invalid tag name' and 'missing tagger entry' warnings can now be
upgraded to errors by specifying `invalidTagName` and
`missingTaggerEntry` in the receive.fsck.<msg-id> config setting.
Incidentally, the missing tagger warning is now really shown as a warning
(as opposed to being reported with the "error:" prefix, as it used to be
the case before this commit).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An fsck issue in a legacy repository might be so common that one would
like not to bother the user with mentioning it at all. With this change,
that is possible by setting the respective message type to "ignore".
This change "abuses" the missingEmail=warn test to verify that "ignore"
is also accepted and works correctly. And while at it, it makes sure
that multiple options work, too (they are passed to unpack-objects or
index-pack as a comma-separated list via the --strict=... command-line
option).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some kinds of errors are intrinsically unrecoverable (e.g. errors while
uncompressing objects). It does not make sense to allow demoting them to
mere warnings.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fsck_tag() identifies a problem with the commit, it should try
to make it possible to continue checking the commit object, in case the
user wants to demote the detected errors to mere warnings.
Just like fsck_commit(), there are certain problems that could hide other
issues with the same tag object. For example, if the 'type' line is not
encountered in the correct position, the 'tag' line – if there is any –
would not be handled at all.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This problem has been detected in the wild, and is the primary reason
to introduce an option to demote certain fsck errors to warnings. Let's
offer to ignore this particular problem specifically.
Technically, we could handle such repositories by setting
receive.fsck.<msg-id> to missingCommitter=warn, but that could hide
missing tree objects in the same commit because we cannot continue
verifying any commit object after encountering a missing committer line,
while we can continue in the case of multiple author lines.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fsck_commit() identifies a problem with the commit, it should try
to make it possible to continue checking the commit object, in case the
user wants to demote the detected errors to mere warnings.
Note that some problems are too problematic to simply ignore. For
example, when the header lines are mixed up, we punt after encountering
an incorrect line. Therefore, demoting certain warnings to errors can
hide other problems. Example: demoting the missingauthor error to
a warning would hide a problematic committer line.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fsck_ident() identifies a problem with the ident, it should still
advance the pointer to the next line so that fsck can continue in the
case of a mere warning.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some repositories written by legacy code have objects with non-fatal
fsck issues. To allow the user to ignore those issues, let's print
out the ID (e.g. when encountering "missingEmail", the user might
want to call `git config --add receive.fsck.missingEmail=warn`).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example, missing emails in commit and tag objects can be demoted to
mere warnings with
git config receive.fsck.missingemail=warn
The value is actually a comma-separated list.
In case that the same key is listed in multiple receive.fsck.<msg-id>
lines in the config, the latter configuration wins (this can happen for
example when both $HOME/.gitconfig and .git/config contain message type
settings).
As git receive-pack does not actually perform the checks, it hands off
the setting to index-pack or unpack-objects in the form of an optional
argument to the --strict option.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are legacy repositories out there whose older commits and tags
have issues that prevent pushing them when 'receive.fsckObjects' is set.
One real-life example is a commit object that has been hand-crafted to
list two authors.
Often, it is not possible to fix those issues without disrupting the
work with said repositories, yet it is still desirable to perform checks
by setting `receive.fsckObjects = true`. This commit is the first step
to allow demoting specific fsck issues to mere warnings.
The `fsck_set_msg_types()` function added by this commit parses a list
of settings in the form:
missingemail=warn,badname=warn,...
Unfortunately, the FSCK_WARN/FSCK_ERROR flag is only really heeded by
git fsck so far, but other call paths (e.g. git index-pack --strict)
error out *always* no matter what type was specified. Therefore, we need
to take extra care to set all message types to FSCK_ERROR by default in
those cases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit d95d728aba.
It turns out that many other commands that need to interact with the
result of running diff-files and diff-index, e.g. "git apply", "git
rm", etc., need to be adjusted to the new world order it brings in.
For example, it would break this sequence to correct a whitespace
breakage in the parts you changed:
git add -N file
git diff --cached file | git apply --cached --whitespace=fix
git checkout file
In the old world order, "diff" showed a patch to modify an existing
empty file by adding its full contents, and "apply" updated the
index by modifying the existing empty blob (which is what an
Intent-to-Add entry records in the index) with that patch.
In the new world order, "diff" shows a patch to create a new file
with its full contents, but because "apply" thinks that the i-t-a
entry already exists in the index, it refused to accept a creation.
Adjusting "apply" to this new world order is easy, but we need to
assess the extent of the damage to the rest of the system the new
world order brought in before going forward and adjust them all,
after which we can resurrect the commit being reverted here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to switch branches to parse another branch's ancestry.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes two instances where a &&-chain was broken in the subtree
tests and fixes a test error that was revealed because of this.
Many tests in t7900-subtree.sh make a commit and then use 'undo' to
reset the state for the next test. In the 'check hash of split' test,
an 'undo' was being invoked after a 'subtree split' even though the
particular invocation of 'subtree split' did not actually make a commit.
The subsequent check_equal was failing, but this failure was masked by
that broken &&-chain.
Removing this undo causes the failing check_equal to succeed but breaks
the a check_equal later on in the same test.
It turns out that an earlier test ('check if --message for merge works
with squash too') makes a commit but doesn't 'undo' to the state
expected by the remaining tests. None of the intervening tests cared
enough about the state of the test repo to fail and the spurious 'undo'
in 'check hash of split' restored the expected state for any remaining
test that might care.
Adding the missing 'undo' to 'check if --message for merge works
with squash too' and removing the spurious one from 'check hash of
split' fixes all tests once the &&-chains are completed.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although subtrees tests uses more spaces for indentation than tabs,
there are still quite a lot of lines indented with tabs. As tabs conform
with Git coding guidelines resolve the inconsistency in favour of tabs.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unsigned long option parsing (including 'k'/'m'/'g' suffix
parsing) is more widely applicable. Add support for OPT_MAGNITUDE
to parse-options.h and change pack-objects.c use this support.
The error behavior on parse errors follows that of OPT_INTEGER. The
name of the option that failed to parse is reported with a brief
message describing the expect format for the option argument and
then the full usage message for the command invoked.
This differs from the previous behavior for OPT_ULONG used in
pack-objects for --max-pack-size and --window-memory which used to
display the value supplied in the error message and did not display
the full usage message.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the printf specification to treat 'integer' as the signed type
that it is and add a test that checks that we parse negative option
arguments.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can sometimes be useful to examine all objects in the
repository. Normally this is done with "git rev-list --all
--objects", but:
1. That shows only reachable objects. You may want to look
at all available objects.
2. It's slow. We actually open each object to walk the
graph. If your operation is OK with seeing unreachable
objects, it's an order of magnitude faster to just
enumerate the loose directories and pack indices.
You can do this yourself using "ls" and "git show-index",
but it's non-obvious. This patch adds an option to
"cat-file --batch-check" to operate on all available
objects (rather than reading names from stdin).
This is based on a proposal by Charles Bailey to provide a
separate "git list-all-objects" command. That is more
orthogonal, as it splits enumerating the objects from
getting information about them. However, in practice you
will either:
a. Feed the list of objects directly into cat-file anyway,
so you can find out information about them. Keeping it
in a single process is more efficient.
b. Ask the listing process to start telling you more
information about the objects, in which case you will
reinvent cat-file's batch-check formatter.
Adding a cat-file option is simple and efficient. And if you
really do want just the object names, you can always do:
git cat-file --batch-check='%(objectname)' --batch-all-objects
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are really two things going on in this function:
1. We convert the name we got on stdin to a sha1.
2. We look up and print information on the sha1.
Let's split out the second half so that we can call it
separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If batch_one_object returns an error code, we stop reading
input. However, it will only do so if we feed it NULL,
which cannot happen; we give it the "buf" member of a
strbuf, which is always non-NULL.
We did originally stop on other errors (like a missing
object), but this was changed in 3c076db (cat-file --batch /
--batch-check: do not exit if hashes are missing,
2008-06-09). These days we keep going for any per-object
error (and print "missing" when necessary).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use a direct write() to output the results of --batch and
--batch-check. This is good for processes feeding the input
and reading the output interactively, but it introduces
measurable overhead if you do not want this feature. For
example, on linux.git:
$ git rev-list --objects --all | cut -d' ' -f1 >objects
$ time git cat-file --batch-check='%(objectsize)' \
<objects >/dev/null
real 0m5.440s
user 0m5.060s
sys 0m0.384s
This patch adds an option to use regular stdio buffering:
$ time git cat-file --batch-check='%(objectsize)' \
--buffer <objects >/dev/null
real 0m4.975s
user 0m4.888s
sys 0m0.092s
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not put extra whitespace before the first macro
argument.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When for_each_packed_object is called, we call
prepare_packed_git() to make sure we have the actual list of
packs. But the latter does not actually open the pack
indices, meaning that pack->nr_objects may simply be 0 if
the pack has not otherwise been used since the program
started.
In practice, this didn't come up for the current callers,
because they iterate the packed objects only after iterating
all reachable objects (so for it to matter you would have to
have a pack consisting only of unreachable objects). But it
is a dangerous and confusing interface that should be fixed
for future callers.
Note that we do not end the iteration when a pack cannot be
opened, but we do return an error. That lets you complete
the iteration even in actively-repacked repository where an
.idx file may racily go away, but it also lets callers know
that they may not have gotten the complete list (which the
current reachability-check caller does care about).
We have to tweak one of the prune tests due to the changed
return value; an earlier test creates bogus .idx files and
does not clean them up. Having to make this tweak is a good
thing; it means we will not prune in a broken repository,
and the test confirms that we do not negatively impact a
more lenient caller, count-objects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify-tag by default displays human-readable output on standard error.
However, it can also be useful to get access to the raw gpg status
information, which is machine-readable, allowing automated
implementation of signing policy. Add a --raw option to make verify-tag
produce the gpg status information on standard error instead of the
human-readable format.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify-commit by default displays human-readable output on standard
error. However, it can also be useful to get access to the raw gpg
status information, which is machine-readable, allowing automated
implementation of signing policy. Add a --raw option to make
verify-commit produce the gpg status information on standard error
instead of the human-readable format.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to handle printing of signature data from a struct
signature_check is very similar between verify-commit and verify-tag.
Place this in a single function. verify-tag retains its special case
behavior of printing the tag even when no valid signature is found.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify-commit and verify-tag both share a central codepath for verifying
commits: check_signature. However, verify-tag exited successfully for
untrusted signature, while verify-commit exited unsuccessfully.
Centralize this signature check and make verify-commit adopt the older
verify-tag behavior. This behavior is more logical anyway, as the
signature is in fact valid, whether or not there's a path of trust to
the author.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify-tag exits successfully if the signature is good but the key is
untrusted. verify-commit exits unsuccessfully. This divergence in
behavior is unexpected and unwanted. Since verify-tag existed earlier,
add a failing test to have verify-commit share verify-tag's behavior.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify-tag was executing an entirely different codepath than
verify-commit, except for the underlying verify_signed_buffer. Move
much of the code from check_commit_signature to a generic
check_signature function and adjust both codepaths to call it.
Update verify-tag to explicitly output the signature text, as we now
call verify_signed_buffer with strbufs to catch the output, which
prevents it from being printed automatically.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify-tag was lacking tests. Add some, mirroring those used for
verify-commit.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref_transaction_update() family of functions use the following
convention for their old_sha1 parameters:
* old_sha1 == NULL: Don't check the old value at all.
* is_null_sha1(old_sha1): Ensure that the reference didn't exist
before the transaction.
* otherwise: Ensure that the reference had the specified value before
the transaction.
delete_ref() had a different convention, namely treating
is_null_sha1(old_sha1) as "don't care". Change it to adhere to the
standard convention to reduce the scope for confusion.
Please note that it is now a bug to pass old_sha1=NULL_SHA1 to
delete_ref() (because it doesn't make sense to delete a reference that
you already know doesn't exist). This is consistent with the behavior
of ref_transaction_delete().
Most of the callers of delete_ref() never pass old_sha1=NULL_SHA1 to
delete_ref(), and are therefore unaffected by this change. The
two exceptions are:
* The call in cmd_update_ref(), which passed NULL_SHA1 if the old
value passed in on the command line was 0{40} or the empty string.
Change that caller to pass NULL in those cases.
Arguably, it should be an error to call "update-ref -d" with the old
value set to "does not exist", just as it is for the `--stdin`
command "delete". But since this usage was accepted until now,
continue to accept it.
* The call in delete_branches(), which could pass NULL_SHA1 if
deleting a broken or symbolic ref. Change it to pass NULL in these
cases.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Restructure the code to avoid clearing oldsha1 when oldval is unset.
It's value is not needed in that case, so this change makes it more
obvious that its initialization is consistent with its later use.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are deleting the reference, then we don't need to read the
reference's old value. It doesn't provide any race safety, because the
value read just before the delete is no "better" than the value that
would be read under lock during the delete. And even if the reference
previously didn't exist, we can call delete_ref() on it if we don't
provide an old_sha1 value.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear that this function does not overwrite its first
argument.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some functions from the refs module were still declared in cache.h.
Move them to refs.h.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In initial_ref_transaction_commit(), check for D/F conflicts (i.e.,
the type of conflict that exists between "refs/foo" and
"refs/foo/bar") among the references being created and between the
references being created and any hypothetical existing references.
Ideally, there shouldn't *be* any existing references when this
function is called. But, at least in the case of the "testgit" remote
helper, "clone" can be called after the remote-tracking "HEAD" and
"master" branches have already been created. So let's just do the
full-blown check.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Error out if the ref_transaction includes more than one update for any
refname.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following functions are no longer used from outside the refs
module:
* lock_packed_refs()
* add_packed_ref()
* commit_packed_refs()
* rollback_packed_refs()
So make these functions private.
This is an important step, because it means that nobody outside of the
refs module needs to know the difference between loose and packed
references.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone" uses shortcuts when creating the initial set of
references:
* It writes them directly to packed-refs.
* It doesn't lock the individual references (though it does lock the
packed-refs file).
* It doesn't check for refname conflicts between two new references or
between one new reference and any hypothetical old ones.
* It doesn't create reflog entries for the reference creations.
This functionality was implemented in builtin/clone.c. But really that
file shouldn't have such intimate knowledge of how references are
stored. So provide a new function in the refs API,
initial_ref_transaction_commit(), which can be used for initial
reference creation. The new function is based on the ref_transaction
interface.
This means that we can make some other functions private to the refs
module. That will be done in a followup commit.
It would seem to make sense to add a test here that there are no
existing references, because that is how the function *should* be
used. But in fact, the "testgit" remote helper appears to call it
*after* having set up refs/remotes/<name>/HEAD and
refs/remotes/<name>/master, so we can't be so strict. For now, the
function trusts its caller to only call it when it makes sense. Future
commits will add some more limited sanity checks.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is no longer called from outside of the refs module. Also move its
docstring and change it to imperative voice.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old version just looped over the references to delete, calling
delete_ref() on each one. But that has quadratic behavior, because
each call to delete_ref() might have to rewrite the packed-refs file.
This can be very expensive in a repository with a large number of
references. In some (admittedly extreme) repositories, we've seen
cases where the ref-pruning part of fetch takes multiple tens of
minutes.
Instead call delete_refs(), which (aside from being less code) has the
optimization that it only rewrites the packed-refs file a single time.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This slightly changes how errors are reported. The old and new code
both report errors that come from repack_without_refs() the same way.
But if an error occurs within delete_ref(), the old version only
emitted an error within delete_ref() without further comment. The new
version (in delete_refs()) still emits that error, but then follows it
up with
error(_("could not remove reference %s"), refname)
The "could not remove reference" error originally came from a similar
message in remove_branches() (from builtin/remote.c).
This is an improvement, because the error from delete_ref() (which
usually comes from ref_transaction_commit()) can be pretty low-level,
like
Cannot lock ref '%s': unable to resolve reference %s: %s
where the last "%s" is the original strerror.
In any case, I don't think we need to sweat the details too much,
because these errors should only ever be seen in the case of a broken
repository or a race between two processes; i.e., only in pretty rare
and anomalous situations.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we fail to delete the doomed references from the packed-refs file,
then it is unsafe to delete their loose references, because doing so
might expose a value from the packed-refs file that is obsolete and
perhaps even points at an object that has been garbage collected.
So if repack_without_refs() fails, emit a more explicit error message
and bail.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the error message from
Could not remove branch %s
to
could not remove reference %s
First of all, the old error message referred to "branch
refs/remotes/origin/foo", which was awkward even for the existing
caller. Normally we would refer to a reference like that as either
"remote-tracking branch origin/foo" or "reference
refs/remotes/origin/foo". Here I take the lazier alternative.
Moreover, now that this function is part of the refs API, it might be
called for refs that are neither branches nor remote-tracking
branches.
While we're at it, convert the error message to lower case, as per our
usual convention.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the function remove_branches() from builtin/remote.c to refs.c,
rename it to delete_refs(), and make it public.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
delete_ref() uses a different convention for its old_sha1 parameter
than, say, ref_transaction_delete(): NULL_SHA1 means not to check the
old value. Make this fact a little bit clearer in the code by handling
it in explicit, commented code rather than burying it in a conditional
expression.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also
* Add a docstring
* Rename the second parameter to "old_sha1", to be consistent with the
convention used elsewhere in the refs module
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These functions will be used in the next commits to allow the user to
ask fsck to handle specific problems differently, e.g. demoting certain
errors to warnings. The upcoming `fsck_set_msg_types()` function has to
handle partial strings because we would like to be able to parse, say,
'missingemail=warn,missingtaggerentry=warn' command line parameters
(which will be passed by receive-pack to index-pack and unpack-objects).
To make the parsing robust, we generate strings from the enum keys, and
using these keys, we match up strings without dashes case-insensitively
to the corresponding enum values.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of specifying whether a message by the fsck machinery constitutes
an error or a warning, let's specify an identifier relating to the
concrete problem that was encountered. This is necessary for upcoming
support to be able to demote certain errors to warnings.
In the process, simplify the requirements on the calling code: instead of
having to handle full-blown varargs in every callback, we now send a
string buffer ready to be used by the callback.
We could use a simple enum for the message IDs here, but we want to
guarantee that the enum values are associated with the appropriate
message types (i.e. error or warning?). Besides, we want to introduce a
parser in the next commit that maps the string representation to the
enum value, hence we use the slightly ugly preprocessor construct that
is extensible for use with said parser.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like the diff machinery, we are about to introduce more settings,
therefore it makes sense to carry them around as a (pointer to a) struct
containing all of them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When no diff nor merge tool is specified (config, option), mergetool-lib
is supposed to choose a default tool from a set of tools. That set is
constructed dynamically depending on the environment (graphical, editor
setting) as a space separated string of tool names.
719518f (mergetool--lib: set IFS for difftool and mergetool, 2015-05-20)
introduced a newline as IFS which breaks the parsing of the space
separated list into items, resulting in a failed search for an available
tool.
Set IFS to a space locally for the tool search.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the beginning of the rewrite of git-pull.sh to C, we introduced a
redirection to git-pull.sh if the environment variable
_GIT_USE_BUILTIN_PULL was not defined in order to not break test scripts
that relied on a functional git-pull.
Now that all of git-pull's functionality has been re-implemented in
builtin/pull.c, remove this redirection, and retire the old git-pull.sh
into contrib/examples/.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the error messages printed by die_no_merge_candidates() to take
into account that we may be "rebasing against" rather than "merging
with".
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Re-implement the behavior introduced by f9189cf (pull --rebase: exit
early when the working directory is dirty, 2008-05-21).
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since cd67e4d (Teach 'git pull' about --rebase, 2007-11-28),
fetch+rebase could be set by default by defining the config variable
branch.<name>.rebase. This setting can be overriden on the command line
by --rebase and --no-rebase.
Since 6b37dff (pull: introduce a pull.rebase option to enable --rebase,
2011-11-06), git-pull --rebase can also be configured via the
pull.rebase configuration option.
Re-implement support for these two configuration settings by introducing
config_get_rebase() which is called before parse_options() to set the
default value of opt_rebase.
Helped-by: Stefan Beller <sbeller@google.com>
Helped-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since cd67e4d (Teach 'git pull' about --rebase, 2007-11-28), if the
--rebase option is set, git-rebase is run instead of git-merge.
Re-implement this by introducing run_rebase(), which is called instead
of run_merge() if opt_rebase is a true value.
Since c85c792 (pull --rebase: be cleverer with rebased upstream
branches, 2008-01-26), git-pull handles the case where the upstream
branch was rebased since it was last fetched. The fork point (old remote
ref) of the branch from the upstream branch is calculated before fetch,
and then rebased from onto the new remote head (merge_head) after fetch.
Re-implement this by introducing get_merge_branch_2() and
get_merge_branch_1() to find the upstream branch for the
specified/current branch, and get_rebase_fork_point() which will find
the fork point between the upstream branch and current branch.
However, the above change created a problem where git-rebase cannot
detect commits that are already upstream, and thus may result in
unnecessary conflicts. cf65426 (pull --rebase: Avoid spurious conflicts
and reapplying unnecessary patches, 2010-08-12) fixes this by ignoring
the above old remote ref if it is contained within the merge base of the
merge head and the current branch.
This is re-implemented in run_rebase() where fork_point is not used if
it is the merge base returned by get_octopus_merge_base().
Helped-by: Stefan Beller <sbeller@google.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
f947413 (Use GIT_REFLOG_ACTION environment variable instead.,
2006-12-28) established git-pull's method for setting the reflog
message, which is to set the environment variable GIT_REFLOG_ACTION to
the evaluation of "pull${1+ $*}" if it has not already been set.
Re-implement this behavior.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b4dc085 (pull: merge into unborn by fast-forwarding from empty
tree, 2013-06-20) established git-pull's current behavior of pulling
into an unborn branch by fast-forwarding the work tree from an empty
tree to the merge head, then setting HEAD to the merge head.
Re-implement this behavior by introducing pull_into_void() which will be
called instead of run_merge() if HEAD is invalid.
Helped-by: Stephen Robin <stephen.robin@gmail.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b10ac50 (Fix pulling into the same branch., 2005-08-25), git-pull,
upon detecting that git-fetch updated the current head, will
fast-forward the working tree to the updated head commit.
Re-implement this behavior.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d38a30d (Be more user-friendly when refusing to do something
because of conflict., 2010-01-12), git-pull will error out with
user-friendly advices if the user is in the middle of a merge or has
unmerged files.
Re-implement this behavior. While the "has unmerged files" case can be
handled by die_resolve_conflict(), we introduce a new function
die_conclude_merge() for printing a different error message for when
there are no unmerged files but the merge has not been finished.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b814da8 (pull: add pull.ff configuration, 2014-01-15), git-pull.sh
would lookup the configuration value of "pull.ff", and set the flag
"--ff" if its value is "true", "--no-ff" if its value is "false" and
"--ff-only" if its value is "only".
Re-implement this behavior.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a8c9bef (pull: improve advice for unconfigured error case,
2009-10-05) fully established the current advices given by git-pull for
the different cases where git-fetch will not have anything marked for
merge:
1. We fetched from a specific remote, and a refspec was given, but it
ended up not fetching anything. This is usually because the user
provided a wildcard refspec which had no matches on the remote end.
2. We fetched from a non-default remote, but didn't specify a branch to
merge. We can't use the configured one because it applies to the
default remote, and thus the user must specify the branches to merge.
3. We fetched from the branch's or repo's default remote, but:
a. We are not on a branch, so there will never be a configured branch
to merge with.
b. We are on a branch, but there is no configured branch to merge
with.
4. We fetched from the branch's or repo's default remote, but the
configured branch to merge didn't get fetched (either it doesn't
exist, or wasn't part of the configured fetch refspec)
Re-implement the above behavior by implementing get_merge_heads() to
parse the heads in FETCH_HEAD for merging, and implementing
die_no_merge_candidates(), which will be called when FETCH_HEAD has no
heads for merging.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since eb2a8d9 (pull: handle git-fetch's options as well, 2015-06-02),
git-pull knows about and handles git-fetch's options, passing them to
git-fetch. Re-implement this behavior.
Since 29609e6 (pull: do nothing on --dry-run, 2010-05-25) git-pull
supported the --dry-run option, exiting after git-fetch if --dry-run is
set. Re-implement this behavior.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If tput needs ~/.terminfo for the current $TERM, then tput will
succeed before HOME is changed to $TRASH_DIRECTORY (causing color to
be set to 't') but fail afterward.
One possible way to fix this is to treat HOME like TERM: back up the
original value and temporarily restore it before say_color() runs
tput.
Instead, pre-compute and save the color control sequences before
changing either TERM or HOME. Use the saved control sequences in
say_color() rather than call tput each time. This avoids the need to
back up and restore the TERM and HOME variables, and it avoids the
overhead of a subshell and two invocations of tput per call to
say_color().
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the common case that the commit encoding matches the
output encoding, we do not touch the buffer at all, which
makes things much more efficient. But it might be unclear to
a consumer that we will pass through bogus sequences.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git checkout <pathspec> can be used to reset changes in the working tree.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 102fc80d32.
There are two issues with that commit:
* It is buggy. In pseudocode, it is doing:
color is set || TERM != dumb && color works && color=t
when it should be doing:
color is set || { TERM != dumb && color works && color=t }
* It unnecessarily disables color when tput needs to read
~/.terminfo to get the control sequences.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a repository is first fetched as a shallow clone, either by
git-clone or by fetching into an empty repo, the server's capabilities
are not currently consulted. The client will send shallow requests even
if the server does not understand them, and the resulting error may be
unhelpful to the user. This change pre-emptively checks so we can exit
with a helpful error if necessary.
Signed-off-by: Mike Edgar <adgar@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* rs/janitorial:
dir: remove unused variable sb
clean: remove unused variable buf
use file_exists() to check if a file exists in the worktree
"git clean pathspec..." tried to lstat(2) and complain even for
paths outside the given pathspec.
* dt/clean-pathspec-filter-then-lstat:
clean: only lstat files in pathspec
Communication between the HTTP server and http_backend process can
lead to a dead-lock when relaying a large ref negotiation request.
Diagnose the situation better, and mitigate it by reading such a
request first into core (to a reasonable limit).
* jk/http-backend-deadlock:
http-backend: spool ref negotiation requests to buffer
t5551: factor out tag creation
http-backend: fix die recursion with custom handler
The clean/smudge interface did not work well when filtering an
empty contents (failed and then passed the empty input through).
It can be argued that a filter that produces anything but empty for
an empty input is nonsense, but if the user wants to do strange
things, then why not?
* jh/filter-empty-contents:
sha1_file: pass empty buffer to index empty file
Make "git stash something --help" error out, so that users can
safely say "git stash drop --help".
* jk/stash-options:
stash: recognize "--help" for subcommands
stash: complain about unknown flags
Clarify that "log --raw" and "log --format=raw" are unrelated
concepts.
* mm/log-format-raw-doc:
Documentation/log: clarify sha1 non-abbreviation in log --raw
Documentation/log: clarify what --raw means
Catch a programmer mistake to feed a pointer not an array to
ARRAY_SIZE() macro, by using a couple of GCC extensions.
* ep/do-not-feed-a-pointer-to-array-size:
git-compat-util.h: implement a different ARRAY_SIZE macro for for safely deriving the size of array
An earlier optimization broke index-pack for a large object
transfer; this fixes it before the breakage hits any released
version.
* nd/slim-index-pack-memory-usage:
index-pack: fix truncation of off_t in comparison
The setup code used to die when core.bare and core.worktree are set
inconsistently, even for commands that do not need working tree.
* jk/die-on-bogus-worktree-late:
setup_git_directory: delay core.bare/core.worktree errors
"git send-email" learned the alias file format used by the sendmail
program (in an abbreviated form).
* ah/send-email-sendmail-alias:
t9001: write $HOME/, not ~/, to help shells without tilde expansion
send-email: add sendmail email aliases format
When debugging the pack protocol, it is sometimes useful to
store the verbatim pack that we sent or received on the
wire. Looking at the on-disk result is often not helpful for
a few reasons:
1. If the operation is a clone, we destroy the repo on
failure, leaving nothing on disk.
2. If the pack is small, we unpack it immediately, and the
full pack never hits the disk.
3. If we feed the pack to "index-pack --fix-thin", the
resulting pack has the extra delta bases added to it.
We already have a GIT_TRACE_PACKET mechanism for tracing
packets. Let's extend it with GIT_TRACE_PACKFILE to dump the
verbatim packfile.
There are a few other positive fallouts that come from
rearranging this code:
- We currently disable the packet trace after seeing the
PACK header, even though we may get human-readable lines
on other sidebands; now we include them in the trace.
- We currently try to print "PACK ..." in the trace to
indicate that the packfile has started. But because we
disable packet tracing, we never printed this line. We
will now do so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git describe does not show 'the most recent tag that is reachable from a
commit', but a descriptive name based on this tag. Fix the description to
reflect that.
Suggested-by: Albert Netymk <albertnetymk@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To find the start of the pack data, we accept the word PACK
at the beginning of any sideband channel, even though what
we really want is to find the pack data on channel 1. In
practice this doesn't matter, as sideband-2 messages tend to
start with "error:" or similar, but it is a good idea to be
explicit (especially as we add more code in this area, we
will rely on this assumption).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We carefully check that our pkt buffer has enough characters
before seeing if it starts with "PACK". The intent is to
avoid reading random memory if we get a short buffer like
"PAC".
However, we know that the traced packets are always
NUL-terminated. They come from one of these sources:
1. A string literal.
2. `format_packet`, which uses a strbuf.
3. `packet_read`, which defensively NUL-terminates what we
read.
We can therefore drop the length checks, as we know we will
hit the trailing NUL if we have a short input.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clean" uses resolve_gitlink_ref() to check for the presence of
nested git repositories, but it has the drawback of creating a
ref_cache entry for every directory that should potentially be
cleaned. The linear search through the ref_cache list causes a massive
performance hit for large number of directories.
Modify clean.c:remove_dirs to use setup.c:is_git_directory and
setup.c:read_gitfile_gently instead.
Both these functions will open files and parse contents when they find
something that looks like a git repository. This is ok from a
performance standpoint since finding repository candidates should be
comparatively rare.
Using is_git_directory and read_gitfile_gently should give a more
standardized check for what is and what isn't a git repository but
also gives three behavioral changes.
The first change is that we will now detect and avoid cleaning empty
nested git repositories (only init run). This is desirable.
Second, we will no longer die when cleaning a file named ".git" with
garbage content (it will be cleaned instead). This is also desirable.
The last change is that we will detect and avoid cleaning empty bare
repositories that have been placed in a directory named ".git". This
is not desirable but should have no real user impact since we already
fail to clean non-empty bare repositories in the same scenario. This
is thus deemed acceptable.
On top of this we add some extra precautions. If read_gitfile_gently
fails to open the git file, read the git file or verify the path in
the git file we assume that the path with the git file is a valid
repository and avoid cleaning.
Update t7300 to reflect these changes in behavior.
The time to clean an untracked directory containing 100000 sub
directories went from 61s to 1.7s after this change.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Erik Elfström <erik.elfstrom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests are run in dry-run mode to avoid having to restore the test
directories for each timed iteration. Using dry-run is an acceptable
compromise since we are mostly interested in the initial computation
of what to clean and not so much in the cleaning it self.
Signed-off-by: Erik Elfström <erik.elfstrom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_gitfile_gently will allocate a buffer to fit the entire file that
should be read. Add a sanity check of the file size before opening to
avoid allocating a potentially huge amount of memory if we come across
a large file that someone happened to name ".git". The limit is set to
a sufficiently unreasonable size that should never be exceeded by a
genuine .git file.
Signed-off-by: Erik Elfström <erik.elfstrom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit ed178ef13a.
That commit was an attempt to improve the safety of applying
a stash, because the application process may create
conflicted index entries, after which it is hard to restore
the original index state.
Unfortunately, this hurts some common workflows around "git
stash -k", like:
git add -p ;# (1) stage set of proposed changes
git stash -k ;# (2) get rid of everything else
make test ;# (3) make sure proposal is reasonable
git stash apply ;# (4) restore original working tree
If you "git commit" between steps (3) and (4), then this
just works. However, if these steps are part of a pre-commit
hook, you don't have that opportunity (you have to restore
the original state regardless of whether the tests passed or
failed).
It's possible that we could provide better tools for this
sort of workflow. In particular, even before ed178ef, it
could fail with a conflict if there were conflicting hunks
in the working tree and index (since the "stash -k" puts the
index version into the working tree, and we then attempt to
apply the differences between HEAD and the old working tree
on top of that). But the fact remains that people have been
using it happily for a while, and the safety provided by
ed178ef is simply not that great. Let's revert it for now.
In the long run, people can work on improving stash for this
sort of workflow, but the safety tradeoff is not worth it in
the meantime.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Specify git-merge's options in the option list, and pass any specified
options to git-merge.
These options are:
* -n, --stat, --summary: since d8abe14 (merge, pull: introduce
'--(no-)stat' option, 2008-04-06)
* --log: since efb779f (merge, pull: add '--(no-)log' command line
option, 2008-04-06)
* --squash: since 7d0c688 (git-merge --squash, 2006-06-23)
* --commit: since 5072a32 (Teach git-pull about --[no-]ff, --no-squash
and --commit, 2007-10-29)
* --edit: since 8580830 ("git pull" doesn't know "--edit", 2012-02-11)
* --ff, --ff-only: since 5072a32 (Teach git-pull about --[no-]ff,
--no-squash and --commit, 2007-10-29)
* --verify-signatures: since efed002 (merge/pull: verify GPG signatures
of commits being merged, 2013-03-31)
* -s, --strategy: since 60fb5b2 (Use git-merge in git-pull (second
try)., 2005-09-25)
* -X, --strategy-option: since ee2c795 (Teach git-pull to pass
-X<option> to git-merge, 2009-11-25)
* -S, --gpg-sign: since ea230d8 (pull: add the --gpg-sign option.,
2014-02-10)
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7f87aff (Teach/Fix pull/fetch -q/-v options, 2008-11-15) taught git-pull
to accept the verbosity -v and -q options and pass them to git-fetch and
git-merge.
Re-implement support for the verbosity flags by adding it to the options
list and introducing argv_push_verbosity() to push the flags into the
argv array used to execute git-fetch and git-merge.
9839018 (fetch and pull: learn --progress, 2010-02-24) and bebd2fd
(pull: propagate --progress to merge, 2011-02-20) taught git-pull to
accept the --progress option and pass it to git-fetch and git-merge.
Use OPT_PASSTHRU() implemented earlier to pass the "--[no-]progress"
command line options to git-fetch and git-merge.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement the fetch + merge functionality of git-pull, by first running
git-fetch with the repo and refspecs provided on the command line, then
running git-merge on FETCH_HEAD to merge the fetched refs into the
current branch.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the purpose of rewriting git-pull.sh into a C builtin, implement a
skeletal builtin/pull.c that redirects to $GIT_EXEC_PATH/git-pull.sh if
the environment variable _GIT_USE_BUILTIN_PULL is not defined. This
allows us to fall back on the functional git-pull.sh when running the
test suite for tests that depend on a working git-pull implementation.
This redirection should be removed when all the features of git-pull.sh
have been re-implemented in builtin/pull.c.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have a null-terminated array, it would be useful to convert it
or append it to an argv_array for further manipulation.
Implement argv_array_pushv() which will push a null-terminated array of
strings on to an argv_array.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain git commands, such as git-pull, are simply wrappers around other
git commands like git-fetch, git-merge and git-rebase. As such, these
wrapper commands will typically need to "pass through" command-line
options of the commands they wrap.
Implement the parse_opt_passthru_argv() parse-options callback, which
will reconstruct all the provided command-line options into an
argv_array, such that it can be passed to another git command. This is
useful for passing command-line options that can be specified multiple
times.
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain git commands, such as git-pull, are simply wrappers around other
git commands like git-fetch, git-merge and git-rebase. As such, these
wrapper commands will typically need to "pass through" command-line
options of the commands they wrap.
Implement the parse_opt_passthru() parse-options callback, which will
reconstruct the command-line option into an char* string, such that it
can be passed to another git command.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-mailsplit, which splits mbox patches, will read the patch from stdin
when the filename is "-" or there are no files listed on the
command-line.
To be consistent with this behavior, teach the mercurial patch parser to
read from stdin if the filename is "-" or no files are listed on the
command-line.
Based-on-patch-by: Chris Packham <judge.packham@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An example of the line in a mercurial patch that specifies the date of
the commit would be:
# Date 1433753301 25200
where the first number is the number of seconds since the unix epoch (in
UTC), and the second number is the offset of the timezone, in second s
west of UTC (negative if the timezone is east of UTC).
git-am uses localtime() to break down the first number into its
components (year, month, day, hours, minutes, seconds etc.). However,
the returned components are relative to the user's time zone. As a
result, if the user's time zone does not match the time zone specified
in the patch, the resulting commit will have the wrong author date.
Fix this by using gmtime() instead, which uses UTC instead of the user's
time zone.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A StGit series is a directory containing a "series" file which begins
with the line:
# This series applies on GIT commit XXXXX
where XXXXX is the commit ID that the patch series applies on. Every
following line names a patch in the directory to be applied.
Test that git-am, when given this "series" file, is able to detect it as
an StGit series and apply all the patches in the series.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-mailsplit, which splits mbox patches, will read the patch from stdin
when the filename is "-" or there are no files listed on the
command-line.
To be consistent with this behavior, teach the StGit patch parser to
read from stdin if the filename is "-" or no files are listed on the
command-line.
Based-on-patch-by: Chris Packham <judge.packham@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is step one of creating a common library for 'for-each-ref',
'branch -l' and 'tag -l'. This creates a header file with the
functions and data structures that ref-filter will provide.
We move the data structures created in for-each-ref to this header
file.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename some of the functions and make them publicly available.
This is a preparatory step for moving code from 'for-each-ref'
to 'ref-filter' to make meaningful, targeted services available to
other commands via public APIs.
Functions renamed are:
parse_atom() -> parse_ref_filter_atom()
verify_format() -> verify_ref_format()
get_value() -> get_ref_atom_value()
grab_single_ref() -> ref_filter_handler()
sort_refs() -> ref_array_sort()
show_ref() -> show_ref_array_item()
default_sort() -> ref_default_sorting()
opt_parse_sort() -> parse_opt_ref_sorting()
cmp_ref_sort() -> cmp_ref_sorting()
Rename 'struct ref_sort' to 'struct ref_sorting' in this context.
Based-on-patch-by: Jeff King <peff@peff.net>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce 'ref_filter_cbdata' which will hold 'ref_filter'
(conditions to filter the refs on) and 'ref_array' (the array
of ref_array_items). Modify the code to use these new structures.
This is a preparatory patch to eventually move code from 'for-each-ref'
to 'ref-filter' and make it publicly available.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename 'refinfo' to 'ref_array_item' as a preparatory step for
introduction of new structures in the forthcoming patch.
Re-order the fields in 'ref_array_item' so that refname can be
eventually converted to a FLEX_ARRAY.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract two helper functions out of grab_single_ref(). Firstly,
new_refinfo() which is used to allocate memory for a new refinfo
structure and copy the objectname, refname and flag to it.
Secondly, match_name_as_path() which when given an array of patterns
and the refname checks if the refname matches any of the patterns
given while the pattern is a pathname, also supports wildcard
characters.
This is a preperatory patch for restructuring 'for-each-ref' and
eventually moving most of it to 'ref-filter' to provide the
functionality to similar commands via public API's.
Helped-by: Junio C Hamano <gitster@pobox.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A config option 'rebase.instructionFormat' can override the
default 'oneline' format of the rebase instruction list.
Since the list is parsed using the left, right or boundary mark plus
the sha1, they are prepended to the instruction format.
Signed-off-by: Michael Rappazzo <rappazzo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of "pmset -g batt" changed at some point from "Currently
drawing from 'AC Power'" to the slightly different "Now drawing from
'AC Power'". Starting the match from "drawing" makes the check work
in both old and new versions of OS X.
Signed-off-by: Panagiotis Astithas <pastith@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to have grafts or replace refs for specific use-cases while
keeping the default "view" of the repository pristine (or with a different
set of grafts/replace refs).
It is possible to use a different graft file with GIT_GRAFT_FILE, but while
replace refs are more powerful, they don't have an equivalent override.
Add a GIT_REPLACE_REF_BASE environment variable to control where git is
going to look for replace refs.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --patch or pathspecs are passed to git checkout, the working tree
will not be switching branch, so there's no need to check if the branch
that we are running checkout on is already checked out.
Original-patch-by: Spencer Baugh <sbaugh@catern.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test expects that "chmod -r ~/.git-credentials" would make it
unreadable to the user, and thus needs the SANITY prerequisite.
Reported-by: Jean-Yves LENHOF <jean-yves@lenhof.eu.org>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The English version is correct, but misleading: It is not the 3way merge
that is being patched also, but that is being fallen back to also.
The German version translates the former meaning. Make it translate the
latter.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
We should not use "sagen" if someone has written something wrong.
Although it's "say" in English, we should not use it in German
and instead use our normal error message.
Signed-off-by: Phillip Sz <phillip.szelat@gmail.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
The bash completion script (in contrib/) learned a few options that
"git revert" takes.
* tb/complete-sequencing:
completion: suggest sequencer commands for revert
Recent "git prune" traverses young unreachable objects to safekeep
old objects in the reachability chain from them, which sometimes
caused error messages that are unnecessarily alarming.
* jk/squelch-missing-link-warning-for-unreachable:
suppress errors on missing UNINTERESTING links
silence broken link warnings with revs->ignore_missing_links
add quieter versions of parse_{tree,commit}
Add more test coverage to "git pull".
* pt/pull-tests:
t5520: check reflog action in fast-forward merge
t5521: test --dry-run does not make any changes
t5520: test --rebase failure on unborn branch with index
t5520: test --rebase with multiple branches
t5520: test work tree fast-forward when fetch updates head
t5520: test for failure if index has unresolved entries
t5520: test no merge candidates cases
t5520: prevent field splitting in content comparisons
The configuration reader/writer uses mmap(2) interface to access
the files; when we find a directory, it barfed with "Out of memory?".
* jk/diagnose-config-mmap-failure:
xmmap(): drop "Out of memory?"
config.c: rewrite ENODEV into EISDIR when mmap fails
config.c: avoid xmmap error messages
config.c: fix mmap leak when writing config
read-cache.c: drop PROT_WRITE from mmap of index
Bring consistency to error reporting mechanism used in "refs" API.
* mh/verify-lock-error-report:
ref_transaction_commit(): do not capitalize error messages
verify_lock(): do not capitalize error messages
verify_lock(): report errors via a strbuf
verify_lock(): on errors, let the caller unlock the lock
verify_lock(): return 0/-1 rather than struct ref_lock *
"color.diff.plain" was a misnomer; give it 'color.diff.context' as
a more logical synonym.
* jk/color-diff-plain-is-context:
diff.h: rename DIFF_PLAIN color slot to DIFF_CONTEXT
diff: accept color.diff.context as a synonym for "plain"
Allow whitespace breakages in deleted and context lines to be also
painted in the output.
* jc/diff-ws-error-highlight:
diff.c: --ws-error-highlight=<kind> option
diff.c: add emit_del_line() and emit_context_line()
t4015: separate common setup and per-test expectation
t4015: modernise style
The environment variable GIT_PS1_STATESEPARATOR can be used to set the
separator between the branch name and the state symbols in the prompt.
At present the variable is not mentioned in the inline documentation which
makes it difficult for the casual user to identify.
Signed-off-by: Joe Cridge <joe.cridge@me.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
reroll count documentation states that v<n> will be pretended to the
filename. Judging by the examples that should have been 'prepended'.
Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --changes-block-size handling was intended to help when
a user has a limited "maxscanrows" (see "p4 group"). It used
"p4 changes -m $maxchanges" to limit the number of results.
Unfortunately, it turns out that the "maxscanrows" and "maxresults"
limits are actually applied *before* the "-m maxchanges" parameter
is considered (experimentally).
Fix the block-size handling so that it gets blocks of changes
limited by revision number ($Start..$Start+$N, etc). This limits
the number of results early enough that both sets of tests pass.
Note that many other Perforce operations can fail for the same
reason (p4 print, p4 files, etc) and it's probably not possible
to workaround this. In the real world, this is probably not
usually a problem.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that git-p4 can handle a sync with a non-numeric revision
range (e.g. a date).
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_gitfile will die on most error cases. This makes it unsuitable
for speculative calls. Extract the core logic and provide a gentle
version that returns NULL on failure.
The first usecase of the new gentle version will be to probe for
submodules during git clean.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Erik Elfström <erik.elfstrom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 45e8a74 (has_sha1_file: re-check pack directory before
giving up, 2013-08-30), we spend extra effort for
has_sha1_file to give the right answer when somebody else is
repacking. Usually this effort does not matter, because
after finding that the object does not exist, the next step
is usually to die().
However, some code paths make a large number of
has_sha1_file checks which are _not_ expected to return 1.
The collision test in index-pack.c is such a case. On a
local system, this can cause a performance slowdown of
around 5%. But on a system with high-latency system calls
(like NFS), it can be much worse.
This patch introduces a "quick" flag to has_sha1_file which
callers can use when they would prefer high performance at
the cost of false negatives during repacks. There may be
other code paths that can use this, but the index-pack one
is the most obviously critical, so we'll start with
switching that one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff and submodule shortlog appended to the commit message template
by 'git commit --verbose' are not stripped when the commit message
contains an indented scissors line.
When cleaning up a commit message with 'git commit --verbose' or
'--cleanup=scissors' the code is careful and triggers only on a pure
scissors line, i.e. a line containing nothing but a comment character, a
space, and the scissors cut. This is good, because people can embed
scissors lines in the commit message while using 'git commit --verbose',
and the text they write after their indented scissors line doesn't get
deleted.
While doing so, however, the cleanup function only looks at the first
line matching the scissors pattern and if it doesn't start at the
beginning of the line, then the function just returns without performing
any cleanup. This is wrong, because a "real" scissors line added by
'git commit --verbose' might follow, and in that case the diff and
submodule shortlog get included in the commit message.
Fix this by changing the scissors pattern to match only at the beginning
of the line, yet be careful to catch scissors on the first line as well.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tcsh users who happen to have 'set noclobber' elsewhere in their
~/.tcshrc or ~/.cshrc startup files get a 'File exist' error, and
the tcsh completion file doesn't get generated/updated.
Adding a `!` in the redirect works correctly for both clobber (default)
and 'set noclobber' users.
Reviewed-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: Ariel Faigon <github.2009@yendor.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 7b3b7e3 (am --abort: keep unrelated commits since the last failure
and warn, 2010-12-21), git-am would refuse to rewind HEAD if commits
were made since the last git-am failure. This check was implemented in
safe_to_abort(), which checked to see if HEAD's hash matched the
abort-safety file.
However, this check was skipped if the abort-safety file was empty,
which can happen if git-am failed while on an unborn branch. As such, if
any commits were made since then, they would be discarded. Fix this by
carrying on the abort safety check even if the abort-safety file is
empty.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-am is first run on an unborn branch, no ORIG_HEAD is created.
As such, any applied commits will remain even after a git am --abort.
To be consistent with the behavior of git am --abort when it is not run
from an unborn branch, we empty the index, and then destroy the branch
pointed to by HEAD if there is no ORIG_HEAD.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even when a merge conflict occurs with am --3way, the index will be
modified with the results of any successfully merged files. These
changes to the index will not be reverted with a
"git read-tree --reset -u HEAD ORIG_HEAD", as git read-tree will not be
aware of how the current index differs from HEAD or ORIG_HEAD.
To fix this, we first reset any conflicting entries in the index. The
resulting index will contain the results of successfully merged files
introduced by the failed merge. We write this index to a tree, and then
use git read-tree to fast-forward this "index tree" back to ORIG_HEAD,
thus undoing all the changes from the failed merge.
When we are on an unborn branch, HEAD and ORIG_HEAD will not point to
valid trees. In this case, use an empty tree.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git am --skip is run, git am will copy HEAD's tree entries to the
index with "git reset HEAD". However, on an unborn branch, HEAD does not
point to a tree, so "git reset HEAD" will fail.
Fix this by treating HEAD as en empty tree when we are on an unborn
branch.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While on an unborn branch, git am -3 will fail to do a threeway merge as
it references HEAD as "our tree", but HEAD does not point to a valid
tree.
Fix this by using an empty tree as "our tree" when we are on an unborn
branch.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even when a merge conflict occurs with am --3way, the index will be
modified with the results of any succesfully merged files (such as a new
file). These changes to the index will not be reverted with a
"git read-tree --reset -u HEAD HEAD", as git read-tree will not be aware
of how the current index differs from HEAD.
To fix this, we first reset any conflicting entries from the index. The
resulting index will contain the results of successfully merged files.
We write the index to a tree, then use git read-tree -m to fast-forward
the "index tree" back to HEAD, thus undoing all the changes from the
failed merge.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, an StGit patch separates the subject from the commit message
and headers as follows:
$subject
From: $author_name <$author_email>
$message
---
$diffstats
We test git-am's ability to detect such a patch as an StGit patch, and
its ability to be able to extract the commit author, date and message
from such a patch.
Based-on-patch-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, if a reflog entry's old or new SHA-1 was not resolvable to
an object, that SHA-1 was silently ignored. Instead, report such cases
as errors.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New function, extracted from fsck_handle_reflog_ent(). The extra
is_null_sha1() test for the new reference is currently unnecessary, as
reflogs are deleted when the reference itself is deleted. But it
doesn't hurt, either.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
NULL_SHA1 is used to indicate an "invalid object name" throughout our
code (and the code of other git implementations), so it is vastly more
likely that an on-disk reference was set to this value due to a
software bug than that NULL_SHA1 is the legitimate SHA-1 of an actual
object. Therefore, if a loose reference has the value NULL_SHA1,
consider it to be broken.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this change, t7063.17 fails. The actual action though happens at
t7063.16 where the entry "two" is added back to index after being
removed in the .13. Here we expect a directory invalidate at .16 and
none at .17 where untracked cache is refreshed. But things do not go as
expected when GIT_TEST_SPLIT_INDEX is set.
The different behavior that happens at .16 when split index is used: the
entry "two", when deleted at .13, is simply marked "deleted". When .16
executes, the entry resurfaces from the version in base index. This
happens in merge_base_index() where add_index_entry() is called to add
"two" back from the base index.
This is where the bug comes from. The add_index_entry() is called with
ADD_CACHE_KEEP_CACHE_TREE flag because this version of "two" is not new,
it does not break either cache-tree or untracked cache. The code should
check this flag and not invalidate untracked cache. This causes a second
invalidation violates test expectation. The fix is obvious.
Noticed-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the --changes-block-size git-p4 test to use an account with
limited "maxresults" and "maxscanrows" values.
These conditions are applied in the server *before* the "-m maxchanges"
parameter to "p4 changes" is applied, and so the strategy that git-p4
uses for limiting the number of changes does not work. As a result,
the tests all fail.
Note that "maxscanrows" is set quite high, as it appears to not only
limit results from "p4 changes", but *also* limits results from
"p4 print". Files that have more than "maxscanrows" changes seem
(experimentally) to be impossible to print. There's no good way to
work around this.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Lex Spoon <lex@lexspoon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add additional tests of some corner-cases of the
--changes-block-size git-p4 parameter.
Also reduce the number of p4 changes created during the
tests, so that they complete faster.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Lex Spoon <lex@lexspoon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last argument of reencode_string_len() is an 'int *' which is
assigned the length of the converted string. When NO_ICONV is defined,
however, reencode_string_len() is stubbed out by the macro:
#define reencode_string_len(a,b,c,d,e) NULL
which never assigns a value to the final argument. When called like
this:
int n;
char *s = reencode_string_len(..., &n);
if (s)
do_something(s, n);
some compilers complain that 'n' is used uninitialized within the
conditional.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new function sleep_millisec() to delay execution for a short
time. This avoids the invocation of select() with just a timeout, but
no file descriptors. Such a use of select() is quit with EINVAL on
Windows, leading to no delay at all.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the goal is to wait for some random amount of time up to one
second, it is not necessary to compute with microsecond precision.
This is a preparation to re-use sleep_millisec().
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to use the new function elsewhere in a moment.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, we do not have functions srandom() and random(). Use srand()
and rand(). These functions produce random numbers of lesser quality,
but for the purpose (a retry time-out) they are still good enough.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike "$EDITOR" and "$GIT_EDITOR" that can hold the path to the
command and initial options (e.g. "/path/to/emacs -nw"), 'git p4'
did not let the shell interpolate the contents of the environment
variable that name the editor "$P4EDITOR" (and "$EDITOR", too).
Make it in line with the rest of Git, as well as with Perforce.
* ld/p4-editor-multi-words:
git-p4: tests: use test-chmtime in place of touch
git-p4: fix handling of multi-word P4EDITOR
git-p4: add failing test for P4EDITOR handling
for_each_ref() callback functions were taught to name the objects
not with "unsigned char sha1[20]" but with "struct object_id".
* bc/object-id: (56 commits)
struct ref_lock: convert old_sha1 member to object_id
warn_if_dangling_symref(): convert local variable "junk" to object_id
each_ref_fn_adapter(): remove adapter
rev_list_insert_ref(): remove unneeded arguments
rev_list_insert_ref_oid(): new function, taking an object_oid
mark_complete(): remove unneeded arguments
mark_complete_oid(): new function, taking an object_oid
clear_marks(): rewrite to take an object_id argument
mark_complete(): rewrite to take an object_id argument
send_ref(): convert local variable "peeled" to object_id
upload-pack: rewrite functions to take object_id arguments
find_symref(): convert local variable "unused" to object_id
find_symref(): rewrite to take an object_id argument
write_one_ref(): rewrite to take an object_id argument
write_refs_to_temp_dir(): convert local variable sha1 to object_id
submodule: rewrite to take an object_id argument
shallow: rewrite functions to take object_id arguments
handle_one_ref(): rewrite to take an object_id argument
add_info_ref(): rewrite to take an object_id argument
handle_one_reflog(): rewrite to take an object_id argument
...
Introduce <branch>@{push} short-hand to denote the remote-tracking
branch that tracks the branch at the remote the <branch> would be
pushed to.
* jk/at-push-sha1:
for-each-ref: accept "%(push)" format
for-each-ref: use skip_prefix instead of starts_with
sha1_name: implement @{push} shorthand
sha1_name: refactor interpret_upstream_mark
sha1_name: refactor upstream_mark
remote.c: add branch_get_push
remote.c: return upstream name from stat_tracking_info
remote.c: untangle error logic in branch_get_upstream
remote.c: report specific errors from branch_get_upstream
remote.c: introduce branch_get_upstream helper
remote.c: hoist read_config into remote_get_1
remote.c: provide per-branch pushremote name
remote.c: hoist branch.*.remote lookup out of remote_get_1
remote.c: drop "remote" pointer from "struct branch"
remote.c: refactor setup of branch->merge list
remote.c: drop default_remote_name variable
Error messages from "git branch" called remote-tracking branches as
"remote branches".
* dl/branch-error-message:
branch: do not call a "remote-tracking branch" a "remote branch"
Test clean-up.
* jk/skip-http-tests-under-no-curl:
tests: skip dav http-push tests under NO_EXPAT=NoThanks
t/lib-httpd.sh: skip tests if NO_CURL is defined
"git rerere forget" in a repository without rerere enabled gave a
cryptic error message; it should be a silent no-op instead.
* jk/rerere-forget-check-enabled:
rerere: exit silently on "forget" when rerere is disabled
The pull.ff configuration was supposed to override the merge.ff
configuration, but it didn't.
* pt/pull-ff-vs-merge-ff:
pull: parse pull.ff as a bool or string
pull: make pull.ff=true override merge.ff
The code to read pack-bitmap wanted to allocate a few hundred
pointers to a structure, but by mistake allocated and leaked memory
enough to hold that many actual structures. Correct the allocation
size and also have it on stack, as it is small enough.
* rs/plug-leak-in-pack-bitmaps:
pack-bitmaps: plug memory leak, fix allocation size for recent_bitmaps
A literal block in the tutorial had lines with unequal lengths to
delimit it from the rest of the document, which choke GitHub's
AsciiDoc renderer.
* ja/tutorial-asciidoctor-fix:
doc: fix unmatched code fences
A literal block in the tutorial had lines with unequal lengths to
delimit it from the rest of the document, which choke GitHub's
AsciiDoc renderer.
* jk/stripspace-asciidoctor-fix:
doc: fix unmatched code fences in git-stripspace
Various documentation mark-up fixes to make the output more
consistent in general and also make AsciiDoctor (an alternative
formatter) happier.
* jk/asciidoc-markup-fix:
doc: convert AsciiDoc {?foo} to ifdef::foo[]
doc: put example URLs and emails inside literal backticks
doc: drop backslash quoting of some curly braces
doc: convert \--option to --option
doc/add: reformat `--edit` option
doc: fix length of underlined section-title
doc: fix hanging "+"-continuation
doc: fix unquoted use of "{type}"
doc: fix misrendering due to `single quote'
Multi-ref transaction support we merged a few releases ago
unnecessarily kept many file descriptors open, risking to fail with
resource exhaustion. This is for 2.4.x track.
* mh/write-refs-sooner-2.4:
ref_transaction_commit(): fix atomicity and avoid fd exhaustion
ref_transaction_commit(): remove the local flags variable
ref_transaction_commit(): inline call to write_ref_sha1()
rename_ref(): inline calls to write_ref_sha1() from this function
commit_ref_update(): new function, extracted from write_ref_sha1()
write_ref_to_lockfile(): new function, extracted from write_ref_sha1()
t7004: rename ULIMIT test prerequisite to ULIMIT_STACK_SIZE
update-ref: test handling large transactions properly
ref_transaction_commit(): fix atomicity and avoid fd exhaustion
ref_transaction_commit(): remove the local flags variable
ref_transaction_commit(): inline call to write_ref_sha1()
rename_ref(): inline calls to write_ref_sha1() from this function
commit_ref_update(): new function, extracted from write_ref_sha1()
write_ref_to_lockfile(): new function, extracted from write_ref_sha1()
t7004: rename ULIMIT test prerequisite to ULIMIT_STACK_SIZE
update-ref: test handling large transactions properly
The ref API did not handle cases where 'refs/heads/xyzzy/frotz' is
removed at the same time as 'refs/heads/xyzzy' is added (or vice
versa) very well.
* mh/ref-directory-file:
reflog_expire(): integrate lock_ref_sha1_basic() errors into ours
ref_transaction_commit(): delete extra "the" from error message
ref_transaction_commit(): provide better error messages
rename_ref(): integrate lock_ref_sha1_basic() errors into ours
lock_ref_sha1_basic(): improve diagnostics for ref D/F conflicts
lock_ref_sha1_basic(): report errors via a "struct strbuf *err"
verify_refname_available(): report errors via a "struct strbuf *err"
verify_refname_available(): rename function
refs: check for D/F conflicts among refs created in a transaction
ref_transaction_commit(): use a string_list for detecting duplicates
is_refname_available(): use dirname in first loop
struct nonmatching_ref_data: store a refname instead of a ref_entry
report_refname_conflict(): inline function
entry_matches(): inline function
is_refname_available(): convert local variable "dirname" to strbuf
is_refname_available(): avoid shadowing "dir" variable
is_refname_available(): revamp the comments
t1404: new tests of ref D/F conflicts within transactions
The "log --decorate" enhancement in Git 2.4 that shows the commit
at the tip of the current branch e.g. "HEAD -> master", did not
work with --decorate=full.
* mg/log-decorate-HEAD:
log: do not shorten decoration names too early
log: decorate HEAD with branch name under --decorate=full, too
There was a commented-out (instead of being marked to expect
failure) test that documented a breakage that was fixed since the
test was written; turn it into a proper test.
* sb/t1020-cleanup:
subdirectory tests: code cleanup, uncomment test
core.excludesfile (defaulting to $XDG_HOME/git/ignore) is supposed
to be overridden by repository-specific .git/info/exclude file, but
the order was swapped from the beginning. This belatedly fixes it.
* jc/gitignore-precedence:
ignore: info/exclude should trump core.excludesfile
The connection initiation code for "ssh" transport tried to absorb
differences between the stock "ssh" and Putty-supplied "plink" and
its derivatives, but the logic to tell that we are using "plink"
variants were too loose and falsely triggered when "plink" appeared
anywhere in the path (e.g. "/home/me/bin/uplink/ssh").
* bc/connect-plink:
connect: improve check for plink to reduce false positives
t5601: fix quotation error leading to skipped tests
connect: simplify SSH connection code path
"git rebase -i" moved the "current" command from "todo" to "done" a
bit too prematurely, losing a step when a "pick" did not even start.
* ph/rebase-i-redo:
rebase -i: redo tasks that die during cherry-pick
Git 2.4 broke setting verbosity and progress levels on "git clone"
with native transports.
* mh/clone-verbosity-fix:
clone: call transport_set_verbosity before anything else on the newly created transport
Some time ago, "git blame" (incorrectly) lost the convert_to_git()
call when synthesizing a fake "tip" commit that represents the
state in the working tree, which broke folks who record the history
with LF line ending to make their project portabile across
platforms while terminating lines in their working tree files with
CRLF for their platform.
* tb/blame-resurrect-convert-to-git:
blame: CRLF in the working tree and LF in the repo
Code clean-up for xdg configuration path support.
* pt/xdg-config-path:
path.c: remove home_config_paths()
git-config: replace use of home_config_paths()
git-commit: replace use of home_config_paths()
credential-store.c: replace home_config_paths() with xdg_config_home()
dir.c: replace home_config_paths() with xdg_config_home()
attr.c: replace home_config_paths() with xdg_config_home()
path.c: implement xdg_config_home()
t0302: "unreadable" test needs POSIXPERM
t0302: test credential-store support for XDG_CONFIG_HOME
git-credential-store: support XDG_CONFIG_HOME
git-credential-store: support multiple credential files
The interface to custom low-level merge driver was modeled to be
capable of driving programs like "merge" (from the RCS suite) that
can produce result solely by looking at three files that hold
contents of common ancestor, ours and theirs. The information we
feed to the external drivers via the command line placeholders %O,
%A, and %B were designed to be purely about contents by giving
names of the temporary files that hold these variants without
exposing the original pathname. No matter where the result goes,
merging the same three variants should produce the same result,
contents is the king, that is the Git way.
The external driver interface, however, is meant to help people to
step outside the Git worldview, and sometimes people want to know
the final path that the resulting merged contents would be stored
in. Expose this to the external drivers via a new placeholder %P.
Requested-by: Andreas Gondek
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the am.threeWay configuration variable to use the -3 or --3way
option of git am by default. When am.threeway is set and not desired
for a specific git am command, the --no-3way option can be used to
override it.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a setup for git am -3 in a separate test instead of creating
this setup each time.
This prepares for the next commit which will use this setup as well.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Initialization for the threeway variable was missing. This caused
a behavior change for command lines like:
threeway=t git am ...
This commit adds initialization for this variable.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c6458e6 (index-pack: kill union delta_base to save
memory, 2015-04-18) refactored the comparison functions used
in sorting and binary searching our delta list. The
resulting code does something like:
int cmp_offsets(off_t a, off_t b)
{
return a - b;
}
This works most of the time, but produces nonsensical
results when the difference between the two offsets is
larger than what can be stored in an "int". This can lead to
unresolved deltas if the packsize is larger than 2G (even on
64-bit systems, an int is still typically 32 bits):
$ git clone git://github.com/mozilla/gecko-dev
Cloning into 'gecko-dev'...
remote: Counting objects: 4800161, done.
remote: Compressing objects: 100% (178/178), done.
remote: Total 4800161 (delta 88), reused 0 (delta 0), pack-reused 4799978
Receiving objects: 100% (4800161/4800161), 2.21 GiB | 3.26 MiB/s, done.
Resolving deltas: 99% (3808820/3811944), completed with 0 local objects.
fatal: pack has 3124 unresolved deltas
fatal: index-pack failed
We can fix it by doing direct comparisons between the
offsets and returning constants; the callers only care about
the sign of the comparison, not the magnitude.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clearer that there are two possible ways to read the
reference, but that we handle read errors uniformly regardless of
which way it was read.
This refactoring also makes the following change easier to implement.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As an optimization, strbuf will take advantage of getdelim() if
available, so add a configure check which defines HAVE_GETDELIM if
found.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Mac OS X, getdelim() first became available with Xcode 4.1[1], which
was released the same day as OS X 10.7 "Lion", so assume getdelim()
availability from 10.7 onward. (As of this writing, OS X is at 10.10
"Yosemite".)
According to Wikipedia[2], 4.1 was also available for download by paying
developers on OS X 10.6 "Snow Leopard", so it's possible that some 10.6
machines may have getdelim(). However, as strbuf's use of getdelim() is
purely an optimization, let's be conservative and assume 10.6 and
earlier lack getdelim().
[1]: Or, possibly with Xcode 4.0, but that version is no longer
available for download, or not available to non-paying developers,
so testing is not possible.
[2]: http://en.wikipedia.org/wiki/Xcode
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ewah/ewok.h header pollutes the global namespace with
"BITS_IN_WORD", without any specific notion that we are
talking about the bits in an eword_t. We can give this the
more specific name "BITS_IN_EWORD".
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On PowerPC Mac OS X (10.5.8 "Leopard" with Xcode 3.1),
system header /usr/include/ppc/param.h[1] pollutes the
preprocessor namespace with a macro generically named MASK.
This conflicts with the same-named macro in ewah/bitmap.c.
We can avoid this conflict by using a more specific name.
[1]: Included indirectly via:
git-compat-util.h ->
sys/sysctl.h ->
sys/ucred.h ->
sys/param.h ->
machine/param.h ->
ppc/param.h
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To enable unambiguous parsing of abbreviated options, bundled short
options, separate form options and to provide consistent usage help, use
git-rev-parse --parseopt for option parsing. With this, simplify the
option parsing code.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While parsing the command-line arguments, git-pull stops parsing at the
first unrecognized option, assuming that any subsequent options are for
git-fetch, and can thus be kept in the shell's positional parameters
list, so that it can be passed to git-fetch via the expansion of "$@".
However, certain functions in git-pull assume that the positional
parameters do not contain any options:
* error_on_no_merge_candidates() uses the number of positional
parameters to determine which error message to print out, and will
thus print the wrong message if git-fetch's options are passed in as
well.
* the call to get_remote_merge_branch() assumes that the positional
parameters only contains the optional repo and refspecs, and will
thus silently fail if git-fetch's options are passed in as well.
* --dry-run is a valid git-fetch option, but if provided after any
git-fetch options, it is not recognized by git-pull and thus git-pull
will continue to run the merge or rebase.
Fix these bugs by teaching git-pull to parse git-fetch's options as
well. Add tests to prevent regressions.
This removes the limitation where git-fetch's options have to come after
git-merge's and git-rebase's options on the command line. Update the
documentation to reflect this.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* pt/pull-tests:
t5520: check reflog action in fast-forward merge
t5521: test --dry-run does not make any changes
t5520: test --rebase failure on unborn branch with index
t5520: test --rebase with multiple branches
t5520: test work tree fast-forward when fetch updates head
t5520: test for failure if index has unresolved entries
t5520: test no merge candidates cases
t5520: prevent field splitting in content comparisons
If there is a loose reference file with invalid contents, "git
for-each-ref" incorrectly reports the problem as being a missing
object with name NULL_SHA1:
$ echo '12345678' >.git/refs/heads/nonsense
$ git for-each-ref
fatal: missing object 0000000000000000000000000000000000000000 for refs/heads/nonsense
With an explicit "--format" string, it can even report that the
reference validly points at NULL_SHA1:
$ git for-each-ref --format='%(objectname) %(refname)'
0000000000000000000000000000000000000000 refs/heads/nonsense
$ echo $?
0
This has been broken since
b7dd2d2 for-each-ref: Do not lookup objects when they will not be used (2009-05-27)
, which changed for-each-ref from using for_each_ref() to using
git_for_each_rawref() in order to avoid looking up the referred-to
objects unnecessarily. (When "git for-each-ref" is given a "--format"
string that doesn't include information about the pointed-to object,
it does not look up the object at all, which makes it considerably
faster. Iterating with DO_FOR_EACH_INCLUDE_BROKEN is essential to this
optimization because otherwise for_each_ref() would itself need to
check whether the object exists as part of its brokenness test.)
But for_each_rawref() includes broken references in the iteration, and
"git for-each-ref" doesn't itself reject references with REF_ISBROKEN.
The result is that broken references are processed *as if* they had
the value NULL_SHA1, which is the value stored in entries for broken
references.
Change "git for-each-ref" to emit warnings for references that are
REF_ISBROKEN but to otherwise skip them.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests that for-each-ref correctly reports broken loose reference
files and references that point at missing objects. In fact, two of
these tests fail, because (1) NULL_SHA1 is not recognized as an
invalid reference value, and (2) for-each-ref doesn't respect
REF_ISBROKEN. Fixes to come.
Note that when for-each-ref is run with a --format option that doesn't
require the object to be looked up, then we should still notice if a
loose reference file is corrupt or contains NULL_SHA1, but we don't
notice if it points at a missing object because we don't do an object
lookup. This is OK.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch --ignore-if-in-upstream A..B", when either A or B
is a tag, failed miserably.
This is because the code passes the tips it used for traversal to
clear_commit_marks(), after running a temporary revision traversal
to enumerate the commits on both branches to find if they have
commits that make equivalent changes. The revision traversal
machinery knows how to enumerate commits reachable starting from a
tag, but clear_commit_marks() wants to take nothing but a commit.
In the longer term, it might be a more correct fix to teach
clear_commit_marks() to do the same "committish to commit"
dereferencing that is done in the revision traversal machinery,
but for now this fix should suffice.
Reported-by: Bruce Korb <bruce.korb@gmail.com>
Helped-by: Christian Couder <christian.couder@gmail.com>
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sendmail aliases parser diagnoses unsupported features and
unrecognized lines. For completeness, also warn about unsupported
redirection to "/path/name" and "|command", as well as ":include:".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A line beginning with whitespace is folded into the preceding line.
A line ending with '\' consumes the following line.
While here, also test an empty sendmail aliases file.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several new tests of sendmail aliases parsing will be added in a
subsequent patch, so factor out functionality common to all of them
into a new helper function.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace unnecessarily complex regular expression for recognizing comment
and blank lines in sendmail aliases with idiomatic expressions which
can be easily understood at a glance.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sendmail aliases parser inlined into %parse_alias is already
uncomfortably large and is expected to grow as additional functionality
is implemented, so extract it to improve manageability.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although emitted to stderr, warnings from the sendmail aliases parser
are not visually distinguished as such, and thus can easily be
overlooked in the normal noisy send-email output.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complement existing --show-email option with fallback
configuration variable, with tests.
Signed-off-by: Quentin Neill <quentin.neill@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase -i" fired post-rewrite hook when it shouldn't (namely,
when it was told to stop sequencing with 'exec' insn).
* mm/rebase-i-post-rewrite-exec:
t5407: use <<- to align the expected output
rebase -i: fix post-rewrite hook with failed exec command
rebase -i: demonstrate incorrect behavior of post-rewrite
"git upload-pack" that serves "git fetch" can be told to serve
commits that are not at the tip of any ref, as long as they are
reachable from a ref, with uploadpack.allowReachableSHA1InWant
configuration variable.
* fm/fetch-raw-sha1:
upload-pack: optionally allow fetching reachable sha1
upload-pack: prepare to extend allow-tip-sha1-in-want
config.txt: clarify allowTipSHA1InWant with camelCase
Group list of commands shown by "git help" along the workflow
elements to help early learners.
* sg/help-group:
help: respect new common command grouping
command-list.txt: drop the "common" tag
generate-cmdlist: parse common group commands
command-list.txt: add the common groups block
command-list: prepare machinery for upcoming "common groups" section
Clarify that "log --raw" and "log --format=raw" are unrelated
concepts.
* mm/log-format-raw-doc:
Documentation/log: clarify sha1 non-abbreviation in log --raw
Documentation/log: clarify what --raw means
"git cat-file --batch(-check)" learned the "--follow-symlinks"
option that follows an in-tree symbolic link when asked about an
object via extended SHA-1 syntax, e.g. HEAD:RelNotes that points at
Documentation/RelNotes/2.5.0.txt. With the new option, the command
behaves as if HEAD:Documentation/RelNotes/2.5.0.txt was given as
input instead.
* dt/cat-file-follow-symlinks:
cat-file: add --follow-symlinks to --batch
sha1_name: get_sha1_with_context learns to follow symlinks
tree-walk: learn get_tree_entry_follow_symlinks
Code clean-up.
* rs/janitorial:
dir: remove unused variable sb
clean: remove unused variable buf
use file_exists() to check if a file exists in the worktree
Make "git stash something --help" error out, so that users can
safely say "git stash drop --help".
* jk/stash-options:
stash: recognize "--help" for subcommands
stash: complain about unknown flags
"git mergetool" learned to drive WinMerge as a backend.
* da/mergetool-winmerge:
mergetools: add winmerge as a builtin tool
mergetool--lib: set IFS for difftool and mergetool
The clean/smudge interface did not work well when filtering an
empty contents (failed and then passed the empty input through).
It can be argued that a filter that produces anything but empty for
an empty input is nonsense, but if the user wants to do strange
things, then why not?
* jh/filter-empty-contents:
sha1_file: pass empty buffer to index empty file
Communication between the HTTP server and http_backend process can
lead to a dead-lock when relaying a large ref negotiation request.
Diagnose the situation better, and mitigate it by reading such a
request first into core (to a reasonable limit).
* jk/http-backend-deadlock:
http-backend: spool ref negotiation requests to buffer
t5551: factor out tag creation
http-backend: fix die recursion with custom handler
"git clean pathspec..." tried to lstat(2) and complain even for
paths outside the given pathspec.
* dt/clean-pathspec-filter-then-lstat:
clean: only lstat files in pathspec
A hunk like this in a hand-edited patch without correctly adjusting
the line counts:
@@ -660,2 +660,2 @@ inline struct sk_buff *ieee80211_authentic...
auth = (struct ieee80211_authentication *)
skb_put(skb, sizeof(struct ieee80211_authentication));
- some old text
+ some new text
--
2.1.0
dev mailing list
at the end of the input does not have a good way for us to diagnose
it as a corrupt patch. We just read two context lines and discard
the remainder as cruft, which we must do in order to ignore the
e-mail footer. Notice that the patch does not change anything and
signal an error.
Note that this fix will not help if the hand-edited hunk header were
"@@ -660,3, +660,2" to include the removal. We would just remove
the old text without adding the new one, and treat "+ some new text"
and everything after that line as trailing cruft. So it is dubious
that this patch alone would help very much in practice, but it may
be better than nothing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are traversing commit parents along the
UNINTERESTING side of a revision walk, we do not care if
the parent turns out to be missing. That lets us limit
traversals using unreachable and possibly incomplete
sections of history. However, we do still print error
messages about the missing commits; this patch suppresses
the error, as well.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We set revs->ignore_missing_links to instruct the
revision-walking machinery that we know the history graph
may be incomplete. For example, we use it when walking
unreachable but recent objects; we want to add what we can,
but it's OK if the history is incomplete.
However, we still print error messages for the missing
objects, which can be confusing. This is not an error, but
just a normal situation when transitioning from a repository
last pruned by an older git (which can leave broken segments
of history) to a more recent one (where we try to preserve
whole reachable segments).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call parse_commit, it will complain to stderr if the
object does not exist or cannot be read. This means that we
may produce useless error messages if this situation is
expected (e.g., because the object is marked UNINTERESTING,
or because revs->ignore_missing_links is set).
We can fix this by adding a new "parse_X_gently" form that
takes a flag to suppress the messages. The existing
"parse_X" form is already gentle in the sense that it
returns an error rather than dying, and we could in theory
just add a "quiet" flag to it (with existing callers passing
"0"). But doing it this way means we do not have to disturb
existing callers.
Note also that the new flag is "quiet_on_missing", and not
just "quiet". We could add a flag to suppress _all_ errors,
but besides being a more invasive change (we would have to
pass the flag down to sub-functions, too), there is a good
reason not to: we would never want to use it. Missing a
linked object is expected in some circumstances, but it is
never expected to have a malformed commit, or to get a tree
when we wanted a commit. We should always complain about
these corruptions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If both core.bare and core.worktree are set, we complain
about the bogus config and die. Dying is good, because it
avoids commands running and doing damage in a potentially
incorrect setup. But dying _there_ is bad, because it means
that commands which do not even care about the work tree
cannot run. This can make repairing the situation harder:
[setup]
$ git config core.bare true
$ git config core.worktree /some/path
[OK, expected.]
$ git status
fatal: core.bare and core.worktree do not make sense
[Hrm...]
$ git config --unset core.worktree
fatal: core.bare and core.worktree do not make sense
[Nope...]
$ git config --edit
fatal: core.bare and core.worktree do not make sense
[Gaaah.]
$ git help config
fatal: core.bare and core.worktree do not make sense
Instead, let's issue a warning about the bogus config when
we notice it (i.e., for all commands), but only die when the
command tries to use the work tree (by calling setup_work_tree).
So we now get:
$ git status
warning: core.bare and core.worktree do not make sense
fatal: unable to set up work tree using invalid config
$ git config --unset core.worktree
warning: core.bare and core.worktree do not make sense
We have to update t1510 to accomodate this; it uses
symbolic-ref to check whether the configuration works or
not, but of course that command does not use the working
tree. Instead, we switch it to use `git status`, as it
requires a work-tree, does not need any special setup, and
is read-only (so a failure will not adversely affect further
tests).
In addition, we add a new test that checks the desired
behavior (i.e., that running "git config" with the bogus
config does in fact work).
Reported-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Every time we run "make", we update perl/PM.stamp, which
contains a list of all of the perl module files (if it's
updated, we need to rebuild perl/perl.mak, since the
Makefile will not otherwise know about the new files).
This means that every time "make" is run, we see:
GEN perl/PM.stamp
in the output, even though it is not likely to have changed.
Let's make this recipe completely silent, as we do for other
auto-generated dependency files (e.g., GIT-CFLAGS).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We force the GIT-BUILD-OPTIONS recipe to run every time
"make" is invoked. We must do this to catch new options
which may have come from the command-line or environment.
However, we actually update the file's timestamp each time
the recipe is run, whether anything changed or not. As a
result, any files which depend on it (for example, all of
the perl scripts, which need to know whether NO_PERL was
set) will be re-built every time.
Let's do our usual trick of writing to a tempfile, then
doing a "cmp || mv" to update the file only when something
changed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rule for "git-instaweb" depends on "gitweb". This makes
no sense, because:
1. git-instaweb has no build-time dependency on gitweb; it
is a run-time dependency
2. gitweb is a directory that we want to recursively make
in. As a result, its recipe is marked .PHONY, which
causes "make" to rebuild git-instaweb every time it is
run.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When testing a fast-forward merge with git-pull, check to see if the
reflog action is "pull" with the arguments passed to git-pull.
While we are in the vicinity, remove the empty line as well.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that when --dry-run is provided to git-pull, it does not make any
changes, namely:
* --dry-run gets passed to git-fetch, so no FETCH_HEAD will be created
and no refs will be fetched.
* The index and work tree will not be modified.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 19a7fcb (allow pull --rebase on branch yet to be born,
2009-08-11) special cases git-pull on an unborn branch in a different
code path such that git-pull --rebase is still valid even though there
is no HEAD yet.
This code path still ensures that there is no index in order not to lose
any staged changes. Implement a test to ensure that this check is
triggered.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since rebasing on top of multiple upstream branches does not make sense,
since 51b2ead (disallow providing multiple upstream branches to rebase,
pull --rebase, 2009-02-18), git-pull explicitly disallowed specifying
multiple branches in the rebase case.
Implement tests to ensure that git-pull fails and prints out the
user-friendly error message in such a case.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b10ac50 (Fix pulling into the same branch., 2005-08-25), git-pull,
upon detecting that git-fetch updated the current head, will
fast-forward the working tree to the updated head commit.
Implement tests to ensure that the fast-forward occurs in such a case,
as well as to ensure that the user-friendly advice is printed upon
failure.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d38a30d (Be more user-friendly when refusing to do something
because of conflict., 2010-01-12) introduced code paths to git-pull
which will error out with user-friendly advices if the user is in the
middle of a merge or has unmerged files.
Implement tests to ensure that git-pull will not run, and will print
these advices, if the user is in the middle of a merge or has unmerged
files in the index.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's better to start the man page with a description of what
submodules actually are, instead of saying what they are not.
Reorder the paragraphs such that
- the first short paragraph introduces the submodule concept,
- the second paragraph highlights the usage of the submodule command,
- the third paragraph giving background information, and finally
- the fourth paragraph discusing alternatives such as subtrees and
remotes, which we don't want to be confused with.
This ordering deepens the knowledge on submodules with each paragraph.
First the basic questions like "How/what" will be answered, while the
underlying concepts will be taught at a later time.
Making sure it is not confused with subtrees and remotes is not really
enhancing knowledge of submodules itself, but rather painting the big
picture of git concepts, so you could also argue to have it as the second
paragraph. Personally I think this may confuse readers, specially
newcomers though.
Additionally to reordering the paragraphs, they have been slightly
reworded.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'merge.branchdesc' is only mentioned in the docs of 'git fmt-merge-msg'.
The description of 'merge.log' is already duplicated between
'merge-config.txt' and 'git-fmt-merge-msg.txt'; instead of duplicating the
description of another config variable, extract the descriptions of both
of these variables from 'git-fmt-merge-msg.txt' into a separate file and
include it there and in 'merge-config.txt'.
Leave 'merge.summary' only in git-fmt-merge-msg.txt, as it is marked
as deprecated.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We show that message with die_errno(), but the OS is ought to know
why mmap(2) failed much better than we do. There is no reason for
us to say "Out of memory?" here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we try to mmap a directory, we'll get ENODEV. This
translates to "no such device" for the user, which is not
very helpful. Since we've just fstat()'d the file, we can
easily check whether the problem was a directory to give a
better message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config-writing code uses xmmap to map the existing
config file, which will die if the map fails. This has two
downsides:
1. The error message is not very helpful, as it lacks any
context about the file we are mapping:
$ mkdir foo
$ git config --file=foo some.key value
fatal: Out of memory? mmap failed: No such device
2. We normally do not die in this code path; instead, we'd
rather report the error and return an appropriate exit
status (which is part of the public interface
documented in git-config.1).
This patch introduces a "gentle" form of xmmap which lets us
produce our own error message. We do not want to use mmap
directly, because we would like to use the other
compatibility elements of xmmap (e.g., handling 0-length
maps portably).
The end result is:
$ git.compile config --file=foo some.key value
error: unable to mmap 'foo': No such device
$ echo $?
3
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We mmap the existing config file, but fail to unmap it if we
hit an error. The function already has a shared exit path,
so we can fix this by moving the mmap pointer to the
function scope and clearing it in the shared exit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, git's in-memory representation of a cache
entry actually pointed to the mmap'd on-disk data. So in
520fc24 (Allow writing to the private index file mapping.,
2005-04-26), we specified PROT_WRITE so that we could tweak
the entries while we run (in our own MAP_PRIVATE copy-on-write
version, of course).
Later, 7a51ed6 (Make on-disk index representation separate
from in-core one, 2008-01-14) stopped doing this; we copy
the data into our in-core representation, and then drop the
mmap immediately. We can therefore drop the PROT_WRITE flag.
It's probably not hurting anything as it is, but it's
potentially confusing.
Note that we could also mark the mapping as "const" to
verify that we never write to it. However, we don't
typically do that for our other maps, as it then requires
casting to munmap() it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixing bug with UTF-16 files when they are retrieved by git-p4. It
was always getting the tip version of the file and the history of
the file was lost.
Signed-off-by: Miguel Torroja <miguel.torroja@gmail.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our convention is for error messages to start with a lower-case
letter.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our convention is for error messages to start with a lower-case
letter.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of writing error messages directly to stderr, write them to
a "strbuf *err". The caller, lock_ref_sha1_basic(), uses this error
reporting convention with all the other callees, and reports its
error this way to its callers.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The latter is a much more descriptive name (and we support
"color.diff.context" now). This also updates the name of any
local variables which were used to store the color.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The term "plain" is a bit ambiguous; let's allow the more
specific "context", but keep "plain" around for
compatibility.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When t7063 starts, it runs "update-index --untracked-cache"
to see if we support the untracked cache. Its output goes
straight to stderr, even if the test is not run with "-v".
Let's wrap it in a prereq that will hide the output by
default, but show it with "-v".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though it is in POSIX, we do not have to use it, only to hurt
shells that may lack the support.
The .mailrc test tries to define an alias in .mailrc in the home
directory by shell redirection, and then tries to see ~/.mailrc in
config is tilde-expanded by Git without help from shell. So the
creation should become $HOME/ to be portable for shells that may
lack tilde expansion but the reference should be done as "~/.mailrc".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach send-email to read aliases in the sendmail aliases format, i.e.
<alias>: <address|alias>[, <address|alias>...]
Examples:
alice: Alice W Land <awol@example.com>
bob: Robert Bobbyton <bob@example.com>
# this is a comment
# this is also a comment
chloe: chloe@example.com
abgroup: alice, bob
bcgrp: bob, chloe, Other <o@example.com>
- Quoted aliases and quoted addresses are not supported.
- Line continuations are not supported.
Warnings are printed for explicitly unsupported constructs, and any
other lines that are not matched by the parser.
Signed-off-by: Allen Hubbe <allenbh@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The caller already knows how to do it, so always do it in the same
place.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Its return value wasn't conveying any extra information, but it made
the reader wonder whether the ref_lock that it returned might be
different than the one that was passed to it. So change the function
to the traditional "return 0 on success or a negative value on error".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These options are intimately related, so it makes sense to
list them nearby in the "-h" output (they are already
adjacent in the manpage).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not only does this save us having to implement a custom
callback, but it handles "--no-reference" in the usual way
(to clear the list).
The generic callback does copy the string, which we don't
technically need, but that should not hurt anything.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, we only cared about whitespace breakages introduced
in new lines. Some people want to paint whitespace breakages on old
lines, too. When they see a whitespace breakage on a new line, they
can spot the same kind of whitespace breakage on the corresponding
old line and want to say "Ah, those breakages are there but they
were inherited from the original, so let's not touch them for now."
Introduce `--ws-error-highlight=<kind>` option, that lets them pass
a comma separated list of `old`, `new`, and `context` to specify
what lines to highlight whitespace errors on.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, we only had emit_add_line() helper, which knows how
to find and paint whitespace breakages on the given line, because we
only care about whitespace breakages introduced in new lines. The
context lines and old (i.e. deleted) lines are emitted with a
simpler emit_line_0() that paints the entire line in plain or old
colors.
Identify callers of emit_line_0() that show deleted lines and
context lines, have them call new helpers, emit_del_line() and
emit_context_line(), so that we can later tweak what is done to
these two classes of lines.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list --objects $old --not --all" to see if everything that
is reachable from $old is already connected to the existing refs
was very inefficient.
* jk/still-interesting:
limit_list: avoid quadratic behavior from still_interesting
"hash-object --literally" introduced in v2.2 was not prepared to
take a really long object type name.
* jc/hash-object:
write_sha1_file(): do not use a separate sha1[] array
t1007: add hash-object --literally tests
hash-object --literally: fix buffer overrun with extra-long object type
git-hash-object.txt: document --literally option
The completion for "log --decorate=" parameter value was incorrect.
* sg/complete-decorate-full-not-long:
completion: fix and update 'git log --decorate=' options
"filter-branch" corrupted commit log message that ends with an
incomplete line on platforms with some "sed" implementations that
munge such a line. Work it around by avoiding to use "sed".
* jk/filter-branch-use-of-sed-on-incomplete-line:
filter-branch: avoid passing commit message through sed
"git daemon" fails to build from the source under NO_IPV6
configuration (regression in 2.4).
* jc/daemon-no-ipv6-for-2.4.1:
daemon: unbreak NO_IPV6 build regression
"git stash pop/apply" forgot to make sure that not just the working
tree is clean but also the index is clean. The latter is important
as a stash application can conflict and the index will be used for
conflict resolution.
* jk/stash-require-clean-index:
stash: require a clean index to apply
t3903: avoid applying onto dirty index
t3903: stop hard-coding commit sha1s
We have prepended $GIT_EXEC_PATH and the path "git" is installed in
(typically "/usr/bin") to $PATH when invoking subprograms and hooks
for almost eternity, but the original use case the latter tried to
support was semi-bogus (i.e. install git to /opt/foo/git and run it
without having /opt/foo on $PATH), and more importantly it has
become less and less relevant as Git grew more mainstream (i.e. the
users would _want_ to have it on their $PATH). Stop prepending the
path in which "git" is installed to users' $PATH, as that would
interfere the command search order people depend on (e.g. they may
not like versions of programs that are unrelated to Git in /usr/bin
and want to override them by having different ones in /usr/local/bin
and have the latter directory earlier in their $PATH).
* jk/git-no-more-argv0-path-munging:
stop putting argv[0] dirname at front of PATH
Teach the index to optionally remember already seen untracked files
to speed up "git status" in a working tree with tons of cruft.
* nd/untracked-cache: (24 commits)
git-status.txt: advertisement for untracked cache
untracked cache: guard and disable on system changes
mingw32: add uname()
t7063: tests for untracked cache
update-index: test the system before enabling untracked cache
update-index: manually enable or disable untracked cache
status: enable untracked cache
untracked-cache: temporarily disable with $GIT_DISABLE_UNTRACKED_CACHE
untracked cache: mark index dirty if untracked cache is updated
untracked cache: print stats with $GIT_TRACE_UNTRACKED_STATS
untracked cache: avoid racy timestamps
read-cache.c: split racy stat test to a separate function
untracked cache: invalidate at index addition or removal
untracked cache: load from UNTR index extension
untracked cache: save to an index extension
ewah: add convenient wrapper ewah_serialize_strbuf()
untracked cache: don't open non-existent .gitignore
untracked cache: mark what dirs should be recursed/saved
untracked cache: record/validate dir mtime and reuse cached output
untracked cache: make a wrapper around {open,read,close}dir()
...
The code to read pack-bitmap wanted to allocate a few hundred
pointers to a structure, but by mistake allocated and leaked memory
enough to hold that many actual structures. Correct the allocation
size and also have it on stack, as it is small enough.
* rs/plug-leak-in-pack-bitmaps:
pack-bitmaps: plug memory leak, fix allocation size for recent_bitmaps
The pull.ff configuration was supposed to override the merge.ff
configuration, but it didn't.
* pt/pull-ff-vs-merge-ff:
pull: parse pull.ff as a bool or string
pull: make pull.ff=true override merge.ff
"git rerere forget" in a repository without rerere enabled gave a
cryptic error message; it should be a silent no-op instead.
* jk/rerere-forget-check-enabled:
rerere: exit silently on "forget" when rerere is disabled
Using "touch" for P4EDITOR means that the tests can be a bit
racy, since git-p4 checks the timestamp has been updated and
fails if the timestamp is not updated.
Use test-chmtime instead, which is designed for this.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last two tests in the script were to
- set up color.diff.* slots
- set up an expectation for a single test
- run that test and check the result
but split in a wrong way. It did the first two in the first test
and the third one in the second test. The latter two belong to each
other. This matters when you plan to add more of these tests that
share the common coloring.
While at it, make sure we use a color different from old, which is
also red.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the preparatory steps that create the expected output inside
the test bodies, remove unnecessary blank lines before and after the
test bodies, and drop SP between redirection operator and its target.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/http-backend-deadlock-2.3:
http-backend: spool ref negotiation requests to buffer
t5551: factor out tag creation
http-backend: fix die recursion with custom handler
* jk/http-backend-deadlock-2.2:
http-backend: spool ref negotiation requests to buffer
t5551: factor out tag creation
http-backend: fix die recursion with custom handler
When http-backend spawns "upload-pack" to do ref
negotiation, it streams the http request body to
upload-pack, who then streams the http response back to the
client as it reads. In theory, git can go full-duplex; the
client can consume our response while it is still sending
the request. In practice, however, HTTP is a half-duplex
protocol. Even if our client is ready to read and write
simultaneously, we may have other HTTP infrastructure in the
way, including the webserver that spawns our CGI, or any
intermediate proxies.
In at least one documented case[1], this leads to deadlock
when trying a fetch over http. What happens is basically:
1. Apache proxies the request to the CGI, http-backend.
2. http-backend gzip-inflates the data and sends
the result to upload-pack.
3. upload-pack acts on the data and generates output over
the pipe back to Apache. Apache isn't reading because
it's busy writing (step 1).
This works fine most of the time, because the upload-pack
output ends up in a system pipe buffer, and Apache reads
it as soon as it finishes writing. But if both the request
and the response exceed the system pipe buffer size, then we
deadlock (Apache blocks writing to http-backend,
http-backend blocks writing to upload-pack, and upload-pack
blocks writing to Apache).
We need to break the deadlock by spooling either the input
or the output. In this case, it's ideal to spool the input,
because Apache does not start reading either stdout _or_
stderr until we have consumed all of the input. So until we
do so, we cannot even get an error message out to the
client.
The solution is fairly straight-forward: we read the request
body into an in-memory buffer in http-backend, freeing up
Apache, and then feed the data ourselves to upload-pack. But
there are a few important things to note:
1. We limit the in-memory buffer to prevent an obvious
denial-of-service attack. This is a new hard limit on
requests, but it's unlikely to come into play. The
default value is 10MB, which covers even the ridiculous
100,000-ref negotation in the included test (that
actually caps out just over 5MB). But it's configurable
on the off chance that you don't mind spending some
extra memory to make even ridiculous requests work.
2. We must take care only to buffer when we have to. For
pushes, the incoming packfile may be of arbitrary
size, and we should connect the input directly to
receive-pack. There's no deadlock problem here, though,
because we do not produce any output until the whole
packfile has been read.
For upload-pack's initial ref advertisement, we
similarly do not need to buffer. Even though we may
generate a lot of output, there is no request body at
all (i.e., it is a GET, not a POST).
[1] http://article.gmane.org/gmane.comp.version-control.git/269020
Test-adapted-from: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the callers of the for_each_ref family of functions have now
been rewritten to work with object_ids, so this adapter is no longer
needed.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the function is not being used as an each_ref_sha1_fn, we can
delete the unused arguments in its signature.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the function is not being used as an each_ref_sha1_fn, we can
delete the unused arguments in its signature.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change typedef each_ref_fn to take a "const struct object_id *oid"
parameter instead of "const unsigned char *sha1".
To aid this transition, implement an adapter that can be used to wrap
old-style functions matching the old typedef, which is now called
"each_ref_sha1_fn"), and make such functions callable via the new
interface. This requires the old function and its cb_data to be
wrapped in a "struct each_ref_fn_sha1_adapter", and that object to be
used as the cb_data for an adapter function, each_ref_fn_adapter().
This is an enormous diff, but most of it consists of simple,
mechanical changes to the sites that call any of the "for_each_ref"
family of functions. Subsequent to this change, the call sites can be
rewritten one by one to use the new interface.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches git-p4 to pass the P4EDITOR variable to the
shell for expansion, so that any command-line arguments are
correctly handled. Without this, git-p4 can only launch the
editor if P4EDITOR is solely the path to the binary, without
any arguments.
This also adjusts t9805, which relied on the previous behaviour.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test case that git-p4 handles a setting of P4EDITOR
that takes arguments, e.g. "gvim -f". This currently fails.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With uploadpack.allowReachableSHA1InWant configuration option set on the
server side, "git fetch" can make a request with a "want" line that names
an object that has not been advertised (likely to have been obtained out
of band or from a submodule pointer). Only objects reachable from the
branch tips, i.e. the union of advertised branches and branches hidden by
transfer.hideRefs, will be processed. Note that there is an associated
cost of having to walk back the history to check the reachability.
This feature can be used when obtaining the content of a certain commit,
for which the sha1 is known, without the need of cloning the whole
repository, especially if a shallow fetch is used. Useful cases are e.g.
repositories containing large files in the history, fetching only the
needed data for a submodule checkout, when sharing a sha1 without telling
which exact branch it belongs to and in Gerrit, if you think in terms of
commits instead of change numbers. (The Gerrit case has already been
solved through allowTipSHA1InWant as every Gerrit change has a ref.)
Signed-off-by: Fredrik Medley <fredrik.medley@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To allow future extensions, e.g. allowing non-tip sha1, replace the
boolean allow_tip_sha1_in_want variable with the flag-style
allow_request_with_bare_object_name variable.
Signed-off-by: Fredrik Medley <fredrik.medley@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no API to ask "Does this commit have associated data in
slab?". If an application wants to (1) parse just a few commits at
the beginning of a process, (2) store data for only these commits,
and then (3) start processing many commits, taking into account the
data stored (for a few of them) in the slab, the application would
use slabname##_at() to allocate a space to store data in (2), but
there is no API other than slabname##_at() to use in step (3). This
allocates and wastes new space for these commits the caller is only
interested in checking if they have data stored in step (2).
Introduce slabname##_peek(), which is similar to slabname##_at() but
returns NULL when there is no data already associated to it in such
a use case.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was a commented-out (instead of being marked to expect
failure) test that documented a breakage that was fixed since the
test was written; turn it into a proper test.
* sb/t1020-cleanup:
subdirectory tests: code cleanup, uncomment test
The controlling tty-based heuristics to squelch progress output did
not consider that the process may not be talking to a tty at all
(e.g. sending the progress to sideband #2). This is a finishing
touch to a topic that is already in 'master'.
* lm/squelch-bg-progress:
progress: treat "no terminal" as being in the foreground
Filter scripts were run with SIGPIPE disabled on the Git side,
expecting that they may not read what Git feeds them to filter.
We however treated a filter that does not read its input fully
before exiting as an error.
This changes semantics, but arguably in a good way. If a filter
can produce its output without consuming its input using whatever
magic, we now let it do so, instead of diagnosing it as a
programming error.
* jc/ignore-epipe-in-filter:
filter_buffer_or_fd(): ignore EPIPE
copy.c: make copy_fd() report its status silently
Git 2.4 broke setting verbosity and progress levels on "git clone"
with native transports.
* mh/clone-verbosity-fix:
clone: call transport_set_verbosity before anything else on the newly created transport
There was a dead code that used to handle "git pull --tags" and
show special-cased error message, which was made irrelevant when
the semantics of the option changed back in Git 1.9 days.
* pt/pull-tags-error-diag:
pull: remove --tags error in no merge candidates case
Instead of dying immediately upon failing to obtain a lock, retry
after a short while with backoff.
* mh/lockfile-retry:
lock_packed_refs(): allow retries when acquiring the packed-refs lock
lockfile: allow file locking to be retried with a timeout
Code clean-up for completion script (in contrib/).
* sg/completion-config:
completion: simplify query for config variables
completion: add a helper function to get config variables
The ref API did not handle cases where 'refs/heads/xyzzy/frotz' is
removed at the same time as 'refs/heads/xyzzy' is added (or vice
versa) very well.
* mh/ref-directory-file:
reflog_expire(): integrate lock_ref_sha1_basic() errors into ours
ref_transaction_commit(): delete extra "the" from error message
ref_transaction_commit(): provide better error messages
rename_ref(): integrate lock_ref_sha1_basic() errors into ours
lock_ref_sha1_basic(): improve diagnostics for ref D/F conflicts
lock_ref_sha1_basic(): report errors via a "struct strbuf *err"
verify_refname_available(): report errors via a "struct strbuf *err"
verify_refname_available(): rename function
refs: check for D/F conflicts among refs created in a transaction
ref_transaction_commit(): use a string_list for detecting duplicates
is_refname_available(): use dirname in first loop
struct nonmatching_ref_data: store a refname instead of a ref_entry
report_refname_conflict(): inline function
entry_matches(): inline function
is_refname_available(): convert local variable "dirname" to strbuf
is_refname_available(): avoid shadowing "dir" variable
is_refname_available(): revamp the comments
t1404: new tests of ref D/F conflicts within transactions
Multi-ref transaction support we merged a few releases ago
unnecessarily kept many file descriptors open, risking to fail with
resource exhaustion. This is for 2.4.x track.
* mh/write-refs-sooner-2.4:
ref_transaction_commit(): fix atomicity and avoid fd exhaustion
ref_transaction_commit(): remove the local flags variable
ref_transaction_commit(): inline call to write_ref_sha1()
rename_ref(): inline calls to write_ref_sha1() from this function
commit_ref_update(): new function, extracted from write_ref_sha1()
write_ref_to_lockfile(): new function, extracted from write_ref_sha1()
t7004: rename ULIMIT test prerequisite to ULIMIT_STACK_SIZE
update-ref: test handling large transactions properly
ref_transaction_commit(): fix atomicity and avoid fd exhaustion
ref_transaction_commit(): remove the local flags variable
ref_transaction_commit(): inline call to write_ref_sha1()
rename_ref(): inline calls to write_ref_sha1() from this function
commit_ref_update(): new function, extracted from write_ref_sha1()
write_ref_to_lockfile(): new function, extracted from write_ref_sha1()
t7004: rename ULIMIT test prerequisite to ULIMIT_STACK_SIZE
update-ref: test handling large transactions properly
The "log --decorate" enhancement in Git 2.4 that shows the commit
at the tip of the current branch e.g. "HEAD -> master", did not
work with --decorate=full.
* mg/log-decorate-HEAD:
log: do not shorten decoration names too early
log: decorate HEAD with branch name under --decorate=full, too
Various documentation mark-up fixes to make the output more
consistent in general and also make AsciiDoctor (an alternative
formatter) happier.
* jk/asciidoc-markup-fix:
doc: convert AsciiDoc {?foo} to ifdef::foo[]
doc: put example URLs and emails inside literal backticks
doc: drop backslash quoting of some curly braces
doc: convert \--option to --option
doc/add: reformat `--edit` option
doc: fix length of underlined section-title
doc: fix hanging "+"-continuation
doc: fix unquoted use of "{type}"
doc: fix misrendering due to `single quote'
A literal block in the tutorial had lines with unequal lengths to
delimit it from the rest of the document, which choke GitHub's
AsciiDoc renderer.
* jk/stripspace-asciidoctor-fix:
doc: fix unmatched code fences in git-stripspace
A literal block in the tutorial had lines with unequal lengths to
delimit it from the rest of the document, which choke GitHub's
AsciiDoc renderer.
* ja/tutorial-asciidoctor-fix:
doc: fix unmatched code fences
Introduce http.<url>.SSLCipherList configuration variable to tweak
the list of cipher suite to be used with libcURL when talking with
https:// sites.
* ls/http-ssl-cipher-list:
http: add support for specifying an SSL cipher list
"git subtree" script (in contrib/) used "echo -n" to produce
progress messages in a non-portable way.
* dl/subtree-avoid-tricky-echo:
contrib/subtree: portability fix for string printing
Test clean-up.
* jk/skip-http-tests-under-no-curl:
tests: skip dav http-push tests under NO_EXPAT=NoThanks
t/lib-httpd.sh: skip tests if NO_CURL is defined
"git subtree" script (in contrib/) does not have --squash option
when pushing, but the documentation and help text pretended as if
it did.
* dl/subtree-push-no-squash:
contrib/subtree: there's no push --squash
The Git subcommand completion (in contrib/) listed credential
helpers among candidates, which is not something the end user would
invoke interatively.
* sg/completion-omit-credential-helpers:
completion: remove credential helpers from porcelain commands
Error messages from "git branch" called remote-tracking branches as
"remote branches".
* dl/branch-error-message:
branch: do not call a "remote-tracking branch" a "remote branch"
Just as we have "%(upstream)" to report the "@{upstream}"
for each ref, this patch adds "%(push)" to match "@{push}".
It supports the same tracking format modifiers as upstream
(because you may want to know, for example, which branches
have commits to push).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This saves us having to maintain a magic number to skip past
the matched prefix.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a triangular workflow, each branch may have two distinct
points of interest: the @{upstream} that you normally pull
from, and the destination that you normally push to. There
isn't a shorthand for the latter, but it's useful to have.
For instance, you may want to know which commits you haven't
pushed yet:
git log @{push}..
Or as a more complicated example, imagine that you normally
pull changes from origin/master (which you set as your
@{upstream}), and push changes to your own personal fork
(e.g., as myfork/topic). You may push to your fork from
multiple machines, requiring you to integrate the changes
from the push destination, rather than upstream. With this
patch, you can just do:
git rebase @{push}
rather than typing out the full name.
The heavy lifting is all done by branch_get_push; here we
just wire it up to the "@{push}" syntax.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that most of the logic for our local get_upstream_branch
has been pushed into the generic branch_get_upstream, we can
fold the remainder into interpret_upstream_mark.
Furthermore, what remains is generic to any branch-related
"@{foo}" we might add in the future, and there's enough
boilerplate that we'd like to reuse it. Let's parameterize
the two operations (parsing the mark and computing its
value) so that we can reuse this for "@{push}" in the near
future.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will be adding new mark types in the future, so separate
the suffix data from the logic.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a triangular workflow, the place you pull from and the
place you push to may be different. As we have
branch_get_upstream for the former, this patch adds
branch_get_push for the latter (and as the former implements
@{upstream}, so will this implement @{push} in a future
patch).
Note that the memory-handling for the return value bears
some explanation. Some code paths require allocating a new
string, and some let us return an existing string. We should
provide a consistent interface to the caller, so it knows
whether to free the result or not.
We could do so by xstrdup-ing any existing strings, and
having the caller always free. But that makes us
inconsistent with branch_get_upstream, so we would prefer to
simply take ownership of the resulting string. We do so by
storing it inside the "struct branch", just as we do with
the upstream refname (in that case we compute it when the
branch is created, but there's no reason not to just fill
it in lazily in this case).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After calling stat_tracking_info, callers often want to
print the name of the upstream branch (in addition to the
tracking count). To do this, they have to access
branch->merge->dst[0] themselves. This is not wrong, as the
return value from stat_tracking_info tells us whether we
have an upstream branch or not. But it is a bit leaky, as we
make an assumption about how it calculated the upstream
name.
Instead, let's add an out-parameter that lets the caller
know the upstream name we found.
As a bonus, we can get rid of the unusual tri-state return
from the function. We no longer need to use it to
differentiate between "no tracking config" and "tracking ref
does not exist" (since you can check the upstream_name for
that), so we can just use the usual 0/-1 convention for
success/error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error-diagnosis logic in branch_get_upstream was copied
straight from sha1_name.c in the previous commit. However,
because we check all error cases and upfront and then later
diagnose them, the logic is a bit tangled. In particular:
- if branch->merge[0] is NULL, we may end up dereferencing
it for an error message (in practice, it should never be
NULL, so this is probably not a triggerable bug).
- We may enter the code path because branch->merge[0]->dst
is NULL, but we then start our error diagnosis by
checking whether our local branch exists. But that is
only relevant to diagnosing missing merge config, not a
missing tracking ref; our diagnosis may hide the real
problem.
Instead, let's just use a sequence of "if" blocks to check
for each error type, diagnose it, and return NULL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit f86a374 (pack-bitmap.c: fix a memleak, 2015-03-30)
noticed that we leak the "result" bitmap. But we should use
"bitmap_free" rather than straight "free", as the former
remembers to free the bitmap array pointed to by the struct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix remaining instances where "pack-file" is used instead of
"packfile". Some places remain where we still use "pack-file",
This is the case when we explicitly refer to a file with a
".pack" extension as opposed to a data source providing a pack
data stream.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually, when 'git rebase' stops before completing the rebase, it is to
give the user an opportunity to edit a commit (e.g. with the 'edit'
command). In such cases, 'git rebase' leaves the sha1 of the commit being
rewritten in "$state_dir"/stopped-sha, and subsequent 'git rebase
--continue' will call the post-rewrite hook with this sha1 as <old-sha1>
argument to the post-rewrite hook.
The case of 'git rebase' stopping because of a failed 'exec' command is
different: it gives the opportunity to the user to examine or fix the
failure, but does not stop saying "here's a commit to edit, use
--continue when you're done". So, there's no reason to call the
post-rewrite hook for 'exec' commands. If the user did rewrite the
commit, it would be with 'git commit --amend' which already called the
post-rewrite hook.
Fix the behavior to leave no stopped-sha file in case of failed exec
command, and teach 'git rebase --continue' to skip record_in_rewritten if
no stopped-sha file is found.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'exec' command is sending the current commit to stopped-sha, which is
supposed to contain the original commit (before rebase). As a result, if
an 'exec' command fails, the next 'git rebase --continue' will send the
current commit as <old-sha1> to the post-rewrite hook.
The test currently fails with :
--- expected.data 2015-05-21 17:55:29.000000000 +0000
+++ [...]post-rewrite.data 2015-05-21 17:55:29.000000000 +0000
@@ -1,2 +1,3 @@
2362ae8e1b1b865e6161e6f0e165ffb974abf018 488028e9fac0b598b70cbeb594258a917e3f6fab
+488028e9fac0b598b70cbeb594258a917e3f6fab 488028e9fac0b598b70cbeb594258a917e3f6fab
babc8a4c7470895886fc129f1a015c486d05a351 8edffcc4e69a4e696a1d4bab047df450caf99507
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the options in config.txt are camelCase. Improve the readability
for allowtipsha1inwant by changing to allowTipSHA1InWant.
Signed-off-by: Fredrik Medley <fredrik.medley@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git help' shows common commands in alphabetical order:
The most commonly used git commands are:
add Add file contents to the index
bisect Find by binary search the change that introduced a bug
branch List, create, or delete branches
checkout Checkout a branch or paths to the working tree
clone Clone a repository into a new directory
commit Record changes to the repository
[...]
without any indication of how commands relate to high-level
concepts or each other. Revise the output to explain their relationship
with the typical Git workflow:
These are common Git commands used in various situations:
start a working area (see also: git help tutorial)
clone Clone a repository into a new directory
init Create an empty Git repository or reinitialize [...]
work on the current change (see also: git help everyday)
add Add file contents to the index
reset Reset current HEAD to the specified state
examine the history and state (see also: git help revisions)
log Show commit logs
status Show the working tree status
[...]
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
command-list.sh, retired in the previous patch, was the only
consumer of the "common" tag, so drop this now-unnecessary
attribute.
before:
git-add mainporcelain common worktree
after:
git-add mainporcelain worktree
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parse the group block to create the array of group descriptions:
static char *common_cmd_groups[] = {
N_("starting a working area"),
N_("working on the current change"),
N_("working with others"),
N_("examining the history and state"),
N_("growing, marking and tweaking your history"),
};
then map each element of common_cmds[] to a group via its index:
static struct cmdname_help common_cmds[] = {
{"add", N_("Add file contents to the index"), 1},
{"branch", N_("List, create, or delete branches"), 4},
{"checkout", N_("Checkout a branch or paths to the ..."), 4},
{"clone", N_("Clone a repository into a new directory"), 0},
{"commit", N_("Record changes to the repository"), 4},
...
};
so that 'git help' can print those commands grouped by theme.
Only commands tagged with an attribute from the group block are emitted to
common_cmds[].
[commit message by Sébastien Guimmara <sebastien.guimmara@gmail.com>]
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ultimate goal is for "git help" to display common commands in
groups rather than alphabetically. As a first step, define the
groups in a new block, and then assign a group to each
common command.
Add a block at the beginning of command-list.txt:
init start a working area (see also: git help tutorial)
worktree work on the current change (see also:[...]
info examine the history and state (see also: git [...]
history grow, mark and tweak your history
remote collaborate (see also: git help workflows)
storing information about common commands group, then map each common
command to a group:
git-add mainporcelain common worktree
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Emma Jane Hogbin Westby <emma.westby@gmail.com>
Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ultimate goal is for "git help" to classify common commands by
group. Toward this end, a subsequent patch will add a new "common
groups" section to command-list.txt preceding the actual command list.
As preparation, teach existing command-list.txt parsing machinery, which
doesn't care about grouping, to skip over this upcoming "common groups"
section.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the previous commit introduced the branch_get_upstream
helper, there was one call-site that could not be converted:
the one in sha1_name.c, which gives detailed error messages
for each possible failure.
Let's teach the helper to optionally report these specific
errors. This lets us convert another callsite, and means we
can use the helper in other locations that want to give the
same error messages.
The logic and error messages come straight from sha1_name.c,
with the exception that we start each error with a lowercase
letter, as is our usual style (note that a few tests need
updated as a result).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the information needed to find the @{upstream} of a
branch is included in the branch struct, but callers have to
navigate a series of possible-NULL values to get there.
Let's wrap that logic up in an easy-to-read helper.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before the previous commit, we had to make sure that
read_config() was called before entering remote_get_1,
because we needed to pass pushremote_name by value. But now
that we pass a function, we can let remote_get_1 handle
loading the config itself, turning our wrappers into true
one-liners.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When remote.c loads its config, it records the
branch.*.pushremote for the current branch along with the
global remote.pushDefault value, and then binds them into a
single value: the default push for the current branch. We
then pass this value (which may be NULL) to remote_get_1
when looking up a remote for push.
This has a few downsides:
1. It's confusing. The early-binding of the "current
value" led to bugs like the one fixed by 98b406f
(remote: handle pushremote config in any order,
2014-02-24). And the fact that pushremotes fall back to
ordinary remotes is not explicit at all; it happens
because remote_get_1 cannot tell the difference between
"we are not asking for the push remote" and "there is
no push remote configured".
2. It throws away intermediate data. After read_config()
finishes, we have no idea what the value of
remote.pushDefault was, because the string has been
overwritten by the current branch's
branch.*.pushremote.
3. It doesn't record other data. We don't note the
branch.*.pushremote value for anything but the current
branch.
Let's make this more like the fetch-remote config. We'll
record the pushremote for each branch, and then explicitly
compute the correct remote for the current branch at the
time of reading.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'll want to use this logic as a fallback when looking up
the pushremote, so let's pull it out into its own function.
We don't technically need to make this available outside of
remote.c, but doing so will provide a consistent API with
pushremote_for_branch, which we will add later.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we create each branch struct, we fill in the
"remote_name" field from the config, and then fill in the
actual "remote" field (with a "struct remote") based on that
name. However, it turns out that nobody really cares about
the latter field. The only two sites that access it at all
are:
1. git-merge, which uses it to notice when the branch does
not have a remote defined. But we can easily replace this
with looking at remote_name instead.
2. remote.c itself, when setting up the @{upstream} merge
config. But we don't need to save the "remote" in the
"struct branch" for that; we can just look it up for
the duration of the operation.
So there is no need to have both fields; they are redundant
with each other (the struct remote contains the name, or you
can look up the struct from the name). It would be nice to
simplify this, especially as we are going to add matching
pushremote config in a future patch (and it would be nice to
keep them consistent).
So which one do we keep and which one do we get rid of?
If we had a lot of callers accessing the struct, it would be
more efficient to keep it (since you have to do a lookup to
go from the name to the struct, but not vice versa). But we
don't have a lot of callers; we have exactly one, so
efficiency doesn't matter. We can decide this based on
simplicity and readability.
And the meaning of the struct value is somewhat unclear. Is
it always the remote matching remote_name? If remote_name is
NULL (i.e., no per-branch config), does the struct fall back
to the "origin" remote, or is it also NULL? These questions
will get even more tricky with pushremotes, whose fallback
behavior is more complicated. So let's just store the name,
which pretty clearly represents the branch.*.remote config.
Any lookup or fallback behavior can then be implemented in
helper functions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call branch_get() to lookup or create a "struct
branch", we make sure the "merge" field is filled in so that
callers can access it. But the conditions under which we do
so are a little confusing, and can lead to two funny
situations:
1. If there's no branch.*.remote config, we cannot provide
branch->merge (because it is really just an application
of branch.*.merge to our remote's refspecs). But
branch->merge_nr may be non-zero, leading callers to be
believe they can access branch->merge (e.g., in
branch_merge_matches and elsewhere).
It doesn't look like this can cause a segfault in
practice, as most code paths dealing with merge config
will bail early if there is no remote defined. But it's
a bit of a dangerous construct.
We can fix this by setting merge_nr to "0" explicitly
when we realize that we have no merge config. Note that
merge_nr also counts the "merge_name" fields (which we
_do_ have; that's how merge_nr got incremented), so we
will "lose" access to them, in the sense that we forget
how many we had. But no callers actually care; we use
merge_name only while iteratively reading the config,
and then convert it to the final "merge" form the first
time somebody calls branch_get().
2. We set up the "merge" field every time branch_get is
called, even if it has already been done. This leaks
memory.
It's not a big deal in practice, since most code paths
will access only one branch, or perhaps each branch
only one time. But if you want to be pathological, you
can leak arbitrary memory with:
yes @{upstream} | head -1000 | git rev-list --stdin
We can fix this by skipping setup when branch->merge is
already non-NULL.
In addition to those two fixes, this patch pushes the "do we
need to setup merge?" logic down into set_merge, where it is
a bit easier to follow.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call file_exists() instead of open-coding it. That's shorter, simpler
and the intent becomes clearer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you run "git stash --help", you get the help for stash
(this magic is done by the git wrapper itself). But if you
run "git stash drop --help", you get an error. We
cannot show help specific to "stash drop", of course, but we
can at least give the user the normal stash manpage.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option parser for git-stash stuffs unknown flags into
the $FLAGS variable, where they can be accessed by the
individual commands. However, most commands do not even look
at these extra flags, leading to unexpected results like
this:
$ git stash drop --help
Dropped refs/stash@{0} (e6cf6d80faf92bb7828f7b60c47fc61c03bd30a1)
We should notice the extra flags and bail. Rather than
annotate each command to reject a non-empty $FLAGS variable,
we can notice that "stash show" is the only command that
actually _wants_ arbitrary flags. So we switch the default
mode to reject unknown flags, and let stash_show() opt into
the feature.
Reported-by: Vincent Legoll <vincent.legoll@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This wires the in-repo-symlink following code through to the cat-file
builtin. In the event of an out-of-repo link, cat-file will print
the link in a new format.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wire up get_sha1_with_context to call get_tree_entry_follow_symlinks
when GET_SHA1_FOLLOW_SYMLINKS is passed in flags. G_S_FOLLOW_SYMLINKS
is incompatible with G_S_ONLY_TO_DIE because the diagnosis
that ONLY_TO_DIE triggers does not at present consider symlinks, and
it would be a significant amount of additional code to allow it to
do so.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new function, get_tree_entry_follow_symlinks, to tree-walk.[ch].
The function is not yet used. It will be used to implement git
cat-file --batch --follow-symlinks.
The function locates an object by path, following symlinks in the
repository. If the symlinks lead outside the repository, the function
reports this to the caller.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-sh-setup sets IFS but it is not used by git-difftool--helper.
Set IFS in git-mergetool--lib so that the mergetool scriptlets,
difftool, and mergetool do not need to do so.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of our tests in t5551 creates a large number of tags,
and jumps through some hoops to do it efficiently. Let's
factor that out into a function so we can make other similar
tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are explicitly ignoring SIGPIPE, as we fully expect that the
filter program may not read our output fully. Ignore EPIPE that
may come from writing to it as well.
A new test was stolen from Jeff's suggestion.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When copy_fd() function encounters errors, it emits error messages
itself, which makes it impossible for callers to take responsibility
for reporting errors, especially when they want to ignore certain
errors.
Move the error reporting to its callers in preparation.
- copy_file() and copy_file_with_time() by indirection get their
own calls to error().
- hold_lock_file_for_append(), when told to die on error, used to
exit(128) relying on the error message from copy_fd(), but now it
does its own die() instead. Note that the callers that do not
pass LOCK_DIE_ON_ERROR need to be adjusted for this change, but
fortunately there is none ;-)
- filter_buffer_or_fd() has its own error() already, in addition to
the message from copy_fd(), so this will change the output but
arguably in a better way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The refs API uses ref_lock struct which had its own "int fd", even
though the same file descriptor was in the lock struct it contains.
Clean-up the code to lose this redundant field.
* sb/ref-lock-lose-lock-fd:
refs.c: remove lock_fd from struct ref_lock
Add the "--allow-unknown-type" option to "cat-file" to allow
inspecting loose objects of an experimental or a broken type.
* kn/cat-file-literally:
t1006: add tests for git cat-file --allow-unknown-type
cat-file: teach cat-file a '--allow-unknown-type' option
cat-file: make the options mutually exclusive
sha1_file: support reading from a loose object of unknown type
A heuristic to help the "git <cmd> <revs> <pathspec>" command line
convention to catch mistyped paths is to make sure all the non-rev
parameters in the later part of the command line are names of the
files in the working tree, but that means "git grep $str -- \*.c"
must always be disambiguated with "--", because nobody sane will
create a file whose name literally is asterisk-dot-see. Loosen the
heuristic to declare that with a wildcard string the user likely
meant to give us a pathspec.
* nd/dwim-wildcards-as-pathspecs:
pathspec: avoid the need of "--" when wildcard is used
"git merge FETCH_HEAD" learned that the previous "git fetch" could
be to create an Octopus merge, i.e. recording multiple branches
that are not marked as "not-for-merge"; this allows us to lose an
old style invocation "git merge <msg> HEAD $commits..." in the
implementation of "git pull" script; the old style syntax can now
be deprecated.
* jc/merge:
merge: deprecate 'git merge <message> HEAD <commit>' syntax
merge: handle FETCH_HEAD internally
merge: decide if we auto-generate the message early in collect_parents()
merge: make collect_parents() auto-generate the merge message
merge: extract prepare_merge_message() logic out
merge: narrow scope of merge_names
merge: split reduce_parents() out of collect_parents()
merge: clarify collect_parents() logic
merge: small leakfix and code simplification
merge: do not check argc to determine number of remote heads
merge: clarify "pulling into void" special case
t5520: test pulling an octopus into an unborn branch
t5520: style fixes
merge: simplify code flow
merge: test the top-level merge driver
"git rebase -i" moved the "current" command from "todo" to "done" a
bit too prematurely, losing a step when a "pick" did not even start.
* ph/rebase-i-redo:
rebase -i: redo tasks that die during cherry-pick
Help us to find broken test script that splits the body part of the
test by mistaken use of wrong kind of quotes.
* jc/test-prereq-validate:
test: validate prerequistes syntax
The connection initiation code for "ssh" transport tried to absorb
differences between the stock "ssh" and Putty-supplied "plink" and
its derivatives, but the logic to tell that we are using "plink"
variants were too loose and falsely triggered when "plink" appeared
anywhere in the path (e.g. "/home/me/bin/uplink/ssh").
* bc/connect-plink:
connect: improve check for plink to reduce false positives
t5601: fix quotation error leading to skipped tests
connect: simplify SSH connection code path
Developer support to automatically detect broken &&-chain in the
test scripts is now turned on by default.
* jk/test-chain-lint:
test-lib: turn on GIT_TEST_CHAIN_LINT by default
t7502-commit.sh: fix a broken and-chain
"git stash pop/apply" forgot to make sure that not just the working
tree is clean but also the index is clean. The latter is important
as a stash application can conflict and the index will be used for
conflict resolution.
* jk/stash-require-clean-index:
stash: require a clean index to apply
t3903: avoid applying onto dirty index
t3903: stop hard-coding commit sha1s
We have prepended $GIT_EXEC_PATH and the path "git" is installed in
(typically "/usr/bin") to $PATH when invoking subprograms and hooks
for almost eternity, but the original use case the latter tried to
support was semi-bogus (i.e. install git to /opt/foo/git and run it
without having /opt/foo on $PATH), and more importantly it has
become less and less relevant as Git grew more mainstream (i.e. the
users would _want_ to have it on their $PATH). Stop prepending the
path in which "git" is installed to users' $PATH, as that would
interfere the command search order people depend on (e.g. they may
not like versions of programs that are unrelated to Git in /usr/bin
and want to override them by having different ones in /usr/local/bin
and have the latter directory earlier in their $PATH).
* jk/git-no-more-argv0-path-munging:
stop putting argv[0] dirname at front of PATH
core.excludesfile (defaulting to $XDG_HOME/git/ignore) is supposed
to be overridden by repository-specific .git/info/exclude file, but
the order was swapped from the beginning. This belatedly fixes it.
* jc/gitignore-precedence:
ignore: info/exclude should trump core.excludesfile
After "git add -N", the path appeared in output of "git diff HEAD"
and "git diff --cached HEAD", leading "git status" to classify it
as "Changes to be committed". Such a path, however, is not yet to
be scheduled to be committed. "git diff" showed the change to the
path as modification, not as a "new file", in the header of its
output.
Treat such paths as "yet to be added to the index but Git already
know about them"; "git diff HEAD" and "git diff --cached HEAD"
should not talk about them, and "git diff" should show them as new
files yet to be added to the index.
* nd/diff-i-t-a:
diff-lib.c: adjust position of i-t-a entries in diff
progress: treat "no terminal" as being in the foreground
Commit 85cb890 (progress: no progress in background,
2015-04-13) avoids sending progress from background
processes by checking that the process group id of the
current process is the same as that of the controlling
terminal.
If we don't have a terminal, however, this check never
succeeds, and we print no progress at all (until the final
"done" message). This can be seen when cloning a large
repository; instead of getting progress updates for
"counting objects", it will appear to hang then print the
final count.
We can fix this by treating an error return from tcgetpgrp()
as a signal to show the progress.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use an automatic variable for recent_bitmaps, an array of pointers.
This way we don't allocate too much and don't have to free the memory
at the end. The old code over-allocated because it reserved enough
memory to store all of the structs it is only pointing to and never
freed it. 160 64-bit pointers take up 1280 bytes, which is not too
much to be placed on the stack.
MAX_XOR_OFFSET is turned into a preprocessor constant to make it
constant enough for use in an non-variable array declaration.
Noticed-by: Stefan Beller <stefanbeller@gmail.com>
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 2879bc3 made the progress and verbosity options sent to remote helper
earlier than they previously were. But nothing else after that would send
updates if the value is changed later on with transport_set_verbosity.
While for fetch and push, transport_set_verbosity is the first thing that
is done after creating the transport, it was not the case for clone. So
commit 2879bc3 broke changing progress and verbosity for clone, for urls
requiring a remote helper only (so, not git:// urls, for instance).
Moving transport_set_verbosity to just after the transport is created
works around the issue.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back when these tests were written, we wanted to make sure that Git
notices it is in a bare repository and "git show -s HEAD" would
refrain from complaining that HEAD might mean a file it sees in its
current working directory (because it does not). But the version of
Git back then didn't behave well, without (doubly) being told that
it is inside a bare repository by exporting "GIT_DIR=.". The form
of the test we originally wanted to have was left commented out as
a reminder.
Nowadays the test as originally intended works, so add it to the
test suite. We'll keep the old test that explicitly sets GIT_DIR=.
to make sure that use case will not regress.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though "git clean" takes pathspec to limit the part of the
working tree to be cleaned, it checked the paths it encounters
during its directory traversal with lstat(2), before checking if
the path is within the pathspec.
Ignore paths outside pathspec and proceed without checking with
lstat(2). Even if such a path is unreadable due to e.g. EPERM,
"git clean" should not care.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several "raw formats", and describing --raw as "Generate the
raw format" in the documentation for git-log seems to imply that it
generates the raw *log* format.
Clarify the wording by saying "raw diff format" explicitly, and make a
special-case for "git log": "git log --raw" does not just change the
format, it shows something which is not shown by default.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b814da8 (pull: add pull.ff configuration, 2014-01-15) git-pull
supported setting --(no-)ff via the pull.ff configuration value.
However, as it only matches the string values of "true" and "false", it
does not support other boolean aliases such as "on", "off", "1", "0".
This is inconsistent with the merge.ff setting, which supports these
aliases.
Fix this by using the bool_or_string_config function to retrieve the
value of pull.ff.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b814da8 (pull: add pull.ff configuration, 2014-01-15), running
git-pull with the configuration pull.ff=false or pull.ff=only is
equivalent to passing --no-ff and --ff-only to git-merge. However, if
pull.ff=true, no switch is passed to git-merge. This leads to the
confusing behavior where pull.ff=false or pull.ff=only is able to
override merge.ff, while pull.ff=true is unable to.
Fix this by adding the --ff switch if pull.ff=true, and add a test to
catch future regressions.
Furthermore, clarify in the documentation that pull.ff overrides
merge.ff.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since efb779f (merge, pull: add '--(no-)log' command line option,
2008-04-06) git-pull supported the (--no-)log switch and would pass it
to git-merge.
96e9420 (merge: Make '--log' an integer option for number of shortlog
entries, 2010-09-08) implemented support for the --log=<n> switch, which
would explicitly set the number of shortlog entries. However, git-pull
does not recognize this option, and will instead pass it to git-fetch,
leading to "unknown option" errors.
Fix this by matching --log=* in addition to --log and --no-log.
Implement a test for this use case.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
a8c9bef (pull: improve advice for unconfigured error case, 2009-10-05)
fully established the current advices given by git-pull for the
different cases where git-fetch will not have anything marked for merge:
1. We fetched from a specific remote, and a refspec was given, but it
ended up not fetching anything. This is usually because the user
provided a wildcard refspec which had no matches on the remote end.
2. We fetched from a non-default remote, but didn't specify a branch to
merge. We can't use the configured one because it applies to the
default remote, and thus the user must specify the branches to merge.
3. We fetched from the branch's or repo's default remote, but:
a. We are not on a branch, so there will never be a configured branch
to merge with.
b. We are on a branch, but there is no configured branch to merge
with.
4. We fetched from the branch's or repo's default remote, but the
configured branch to merge didn't get fetched (either it doesn't
exist, or wasn't part of the configured fetch refspec)
Implement tests for the above 5 cases to ensure that the correct code
paths are triggered for each of these cases.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests in t5520 used the following to test the contents of files:
test `cat file` = expected
or
test $(cat file) = expected
These 2 forms, however, will be affected by field splitting and,
depending on the value of $IFS, may be split into multiple arguments,
making the test fail in mysterious ways.
Replace the above 2 forms with:
test "$(cat file)" = expected
as quoting the command substitution will prevent field splitting.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git add` of an empty file with a filter pops complaints from
`copy_fd` about a bad file descriptor.
This traces back to these lines in sha1_file.c:index_core:
if (!size) {
ret = index_mem(sha1, NULL, size, type, path, flags);
The problem here is that content to be added to the index can be
supplied from an fd, or from a memory buffer, or from a pathname. This
call is supplying a NULL buffer pointer and a zero size.
Downstream logic takes the complete absence of a buffer to mean the
data is to be found elsewhere -- for instance, these, from convert.c:
if (params->src) {
write_err = (write_in_full(child_process.in, params->src, params->size) < 0);
} else {
write_err = copy_fd(params->fd, child_process.in);
}
~If there's a buffer, write from that, otherwise the data must be coming
from an open fd.~
Perfectly reasonable logic in a routine that's going to write from
either a buffer or an fd.
So change `index_core` to supply an empty buffer when indexing an empty
file.
There's a patch out there that instead changes the logic quoted above to
take a `-1` fd to mean "use the buffer", but it seems to me that the
distinction between a missing buffer and an empty one carries intrinsic
semantics, where the logic change is adapting the code to handle
incorrect arguments.
Signed-off-by: Jim Hill <gjthill@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed for getcommitlines to work properly when a language
translation is being used.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
If the current view is the "Command line" view, show the command line
arguments instead of the view name.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This adds menu entries to two of the right-click menus:
- 'Copy path' in the file list
- 'Copy branch name' on a branch in the commit list
Signed-off-by: Michael Rappazzo <rappazzo@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This is a better fix for 8d849957d8.
This new fix makes the strings "Sorry, gitk cannot run..." and "OK"
translatable and the string "mc" not translatable. It will take effect
the next time `make update-po` is run.
msgcat is now imported before the Tcl/Tk version check so that the mc
function is available even if the version check fails. This should not
be a problem because msgcat and ::msgcat::mc were officially added in
Tcl 8.1 (released April 29, 1999) and we are not trying to support
versions of Tcl older than that.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
When we die() in http-backend, we call a custom handler that
writes an HTTP 500 response to stdout, then reports the
error to stderr. Our routines for writing out the HTTP
response may themselves die, leading to us entering die()
again.
When it was originally written, that was OK; our custom
handler keeps a variable to notice this and does not
recurse. However, since cd163d4 (usage.c: detect recursion
in die routines and bail out immediately, 2012-11-14), the
main die() implementation detects recursion before we even
get to our custom handler, and bails without printing
anything useful.
We can handle this case by doing two things:
1. Installing a custom die_is_recursing handler that
allows us to enter up to one level of recursion. Only
the first call to our custom handler will try to write
out the error response. So if we die again, that is OK.
If we end up dying more than that, it is a sign that we
are in an infinite recursion.
2. Reporting the error to stderr before trying to write
out the HTTP response. In the current code, if we do
die() trying to write out the response, we'll exit
immediately from this second die(), and never get a
chance to output the original error (which is almost
certainly the more interesting one; the second die is
just going to be along the lines of "I tried to write
to stdout but it was closed").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, there is only one attempt to acquire any lockfile, and if
the lock is held by another process, the locking attempt fails
immediately.
This is not such a limitation for loose reference files. First, they
don't take long to rewrite. Second, most reference updates have a
known "old" value, so if another process is updating a reference at
the same moment that we are trying to lock it, then probably the
expected "old" value will not longer be valid, and the update will
fail anyway.
But these arguments do not hold for packed-refs:
* The packed-refs file can be large and take significant time to
rewrite.
* Many references are stored in a single packed-refs file, so it could
be that the other process was changing a different reference than
the one that we are interested in.
Therefore, it is much more likely for there to be spurious lock
conflicts in connection to the packed-refs file, resulting in
unnecessary command failures.
So, if the first attempt to lock the packed-refs file fails, continue
retrying for a configurable length of time before giving up. The
default timeout is 1 second.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, there is only one attempt to lock a file. If it fails, the
whole operation fails.
But it might sometimes be advantageous to try acquiring a file lock a
few times before giving up. So add a new function,
hold_lock_file_for_update_timeout(), that allows a timeout to be
specified. Make hold_lock_file_for_update() a thin wrapper around the
new function.
If timeout_ms is positive, then retry for at least that many
milliseconds to acquire the lock. On each failed attempt, use select()
to wait for a backoff time that increases quadratically (capped at 1
second) and has a random component to prevent two processes from
getting synchronized. If timeout_ms is negative, retry indefinitely.
In a moment we will switch to using the new function when locking
packed-refs.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you run "git rerere forget foo" in a repository that does
not have rerere enabled, git hits an internal error:
$ git init -q
$ git rerere forget foo
fatal: BUG: attempt to commit unlocked object
The problem is that setup_rerere() will not actually take
the lock if the rerere system is disabled. We should notice
this and return early. We can return with a success code
here, because we know there is nothing to forget.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 441ed41 ("git pull --tags": error out with a better message.,
2007-12-28), git pull --tags would print a different error message if
git-fetch did not return any merge candidates:
It doesn't make sense to pull all tags; you probably meant:
git fetch --tags
This is because at that time, git-fetch --tags would override any
configured refspecs, and thus there would be no merge candidates. The
error message was thus introduced to prevent confusion.
However, since c5a84e9 (fetch --tags: fetch tags *in addition to*
other stuff, 2013-10-30), git fetch --tags would fetch tags in addition
to any configured refspecs. Hence, if any no merge candidates situation
occurs, it is not because --tags was set. As such, this special error
message is now irrelevant.
To prevent confusion, remove this error message.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The former seems to just be syntactic sugar for the latter.
And as it's sugar that AsciiDoctor doesn't understand, it
would be nice to avoid it. Since there are only two spots,
and the resulting source is not significantly harder to
read, it's worth doing.
Note that this does slightly affect the generated HTML (it
has an extra newline), but the rendered result for both HTML
and docbook should be the same (since the newline is not
syntactically significant there).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cat-file bl $blob" failed to barf even though there is no
object type that is "bl".
* jk/type-from-string-gently:
type_from_string_gently: make sure length matches
Teach the codepaths that read .gitignore and .gitattributes files
that these files encoded in UTF-8 may have UTF-8 BOM marker at the
beginning; this makes it in line with what we do for configuration
files already.
* cn/bom-in-gitignore:
attr: skip UTF8 BOM at the beginning of the input file
config: use utf8_bom[] from utf.[ch] in git_parse_source()
utf8-bom: introduce skip_utf8_bom() helper
add_excludes_from_file: clarify the bom skipping logic
dir: allow a BOM at the beginning of exclude files
Access to objects in repositories that borrow from another one on a
slow NFS server unnecessarily got more expensive due to recent code
becoming more cautious in a naive way not to lose objects to pruning.
* jk/prune-mtime:
sha1_file: only freshen packs once per run
sha1_file: freshen pack objects before loose
reachable: only mark local objects as recent
We avoid setting core.worktree when the repository location is the
".git" directory directly at the top level of the working tree, but
the code misdetected the case in which the working tree is at the
root level of the filesystem (which arguably is a silly thing to
do, but still valid).
* jk/init-core-worktree-at-root:
init: don't set core.worktree when initializing /.git
The DECORATE_SHORT_REFS option given to load_ref_decorations()
affects the way a copy of the refname is stored for each decorated
commit, and this forces later steps like current_pointed_by_HEAD()
to adjust their behaviour based on this initial settings.
Instead, we can always store the full refname and then shorten them
when producing the output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous step to teach "log --decorate" to show "HEAD -> master"
instead of "HEAD, master" when showing the commit at the tip of the
'master' branch, when the 'master' branch is checked out, did not
work for "log --decorate=full".
The commands in the "log" family prepare commit decorations for all
refs upfront, and the actual string used in a decoration depends on
how load_ref_decorations() is called very early in the process. By
default, "git log --decorate" stores names with common prefixes such
as "refs/heads" stripped; "git log --decorate=full" stores the full
refnames.
When the current_pointed_by_HEAD() function has to decide if "HEAD"
points at the branch a decoration describes, however, what was
passed to load_ref_decorations() to decide to strip (or keep) such a
common prefix is long lost. This makes it impossible to reliably
tell if a decoration that stores "refs/heads/master", for example,
is the 'master' branch (under "--decorate" with prefix omitted) or
'refs/heads/master' branch (under "--decorate=full").
Keep what was passed to load_ref_decorations() in a global next to
the global variable name_decoration, and use that to decide how to
match what was read from "HEAD" and what is in a decoration.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes sure that AsciiDoc does not turn them into links.
Regular AsciiDoc does not catch these cases, but AsciiDoctor
does treat them as links.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Text like "{foo}" triggers an AsciiDoc attribute; we have to
write "\{foo}" to suppress this. But when the "foo" is not a
syntactically valid attribute, we can skip the quoting. This
makes the source nicer to read, and looks better under
Asciidoctor. With AsciiDoc itself, this patch produces no
changes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Older versions of AsciiDoc would convert the "--" in
"--option" into an emdash. According to 565e135
(Documentation: quote double-dash for AsciiDoc, 2011-06-29),
this is fixed in AsciiDoc 8.3.0. According to bf17126, we
don't support anything older than 8.4.1 anyway, so we no
longer need to worry about quoting.
Even though this does not change the output at all, there
are a few good reasons to drop the quoting:
1. It makes the source prettier to read.
2. We don't quote consistently, which may be confusing when
reading the source.
3. Asciidoctor does not like the quoting, and renders a
literal backslash.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the other options in the list put short and long as
two separate headings.
We can also drop the backslashing of `--`. It isn't used
elsewhere and is unnecessary for modern asciidoc (plus it
confuses asciidoctor).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In AsciiDoc, it is OK to say:
this is my title
-------------------------
but AsciiDoctor is more strict. Let's match the underline to
the title (which also makes the source prettier to read).
The output from AsciiDoc is the same either way.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In list content that wants to continue to a second
paragraph, the "+" continuation and subsequent paragraph
need to be left-aligned. Otherwise AsciiDoc seems to insert
only a linebreak.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Curly braces open an "attribute" in AsciiDoc; if there's no
such attribute, strange things may happen. In this case, the
unquoted "{type}" causes AsciiDoc to omit an entire line of
text from the output. We can fix it by putting the whole
phrase inside literal backticks (which also lets us get rid
of ugly backslash escaping).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
AsciiDoc misparses some text that contains a `literal`
word followed by a fancy `single quote' word, and treats
everything from the start of the literal to the end of the
quote as a single-quoted phrase.
We can work around this by switching the latter to be a
literal, as well. In the first case, this is perhaps what
was intended anyway, as it makes us consistent with the the
earlier literals in the same paragraph. In the second, the
output is arguably better, as we will format our commit
references as <code> blocks.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The asciidoctor renderer is more picky than classic asciidoc,
and insists that the start and end of a code fence be the
same size.
Found with this hacky perl script:
foreach my $fn (@ARGV) {
open(my $fh, '<', $fn);
my ($fence, $fence_lineno, $prev);
while (<$fh>) {
chomp;
if (/^----+$/) {
if ($fence_lineno) {
if ($_ ne $fence) {
print "$fn:$fence_lineno:mismatched fence: ",
length($fence), " != ", length($_), "\n";
}
$fence_lineno = undef;
}
# hacky check to avoid title-underlining
elsif ($prev eq '' || $prev eq '+') {
$fence = $_;
$fence_lineno = $.;
}
}
$prev = $_;
}
}
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/write-refs-sooner-2.3:
ref_transaction_commit(): fix atomicity and avoid fd exhaustion
ref_transaction_commit(): remove the local flags variable
ref_transaction_commit(): inline call to write_ref_sha1()
rename_ref(): inline calls to write_ref_sha1() from this function
commit_ref_update(): new function, extracted from write_ref_sha1()
write_ref_to_lockfile(): new function, extracted from write_ref_sha1()
t7004: rename ULIMIT test prerequisite to ULIMIT_STACK_SIZE
update-ref: test handling large transactions properly
The old code was roughly
for update in updates:
acquire locks and check old_sha
for update in updates:
if changing value:
write_ref_to_lockfile()
commit_ref_update()
for update in updates:
if deleting value:
unlink()
rewrite packed-refs file
for update in updates:
if reference still locked:
unlock_ref()
This has two problems.
Non-atomic updates
==================
The atomicity of the reference transaction depends on all pre-checks
being done in the first loop, before any changes have started being
committed in the second loop. The problem is that
write_ref_to_lockfile() (previously part of write_ref_sha1()), which
is called from the second loop, contains two more checks:
* It verifies that new_sha1 is a valid object
* If the reference being updated is a branch, it verifies that
new_sha1 points at a commit object (as opposed to a tag, tree, or
blob).
If either of these checks fails, the "transaction" is aborted during
the second loop. But this might happen after some reference updates
have already been permanently committed. In other words, the
all-or-nothing promise of "git update-ref --stdin" could be violated.
So these checks have to be moved to the first loop.
File descriptor exhaustion
==========================
The old code locked all of the references in the first loop, leaving
all of the lockfiles open until later loops. Since we might be
updating a lot of references, this could result in file descriptor
exhaustion.
The solution
============
After this patch, the code looks like
for update in updates:
acquire locks and check old_sha
if changing value:
write_ref_to_lockfile()
else:
close_ref()
for update in updates:
if changing value:
commit_ref_update()
for update in updates:
if deleting value:
unlink()
rewrite packed-refs file
for update in updates:
if reference still locked:
unlock_ref()
This fixes both problems:
1. The pre-checks in write_ref_to_lockfile() are now done in the first
loop, before any changes have been committed. If any of the checks
fails, the whole transaction can now be rolled back correctly.
2. All lockfiles are closed in the first loop immediately after they
are created (either by write_ref_to_lockfile() or by close_ref()).
This means that there is never more than one open lockfile at a
time, preventing file descriptor exhaustion.
To simplify the bookkeeping across loops, add a new REF_NEEDS_COMMIT
bit to update->flags, which keeps track of whether the corresponding
lockfile needs to be committed, as opposed to just unlocked. (Since
"struct ref_update" is internal to the refs module, this change is not
visible to external callers.)
This change fixes two tests in t1400.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead, work directly with update->flags. This has the advantage that
the REF_DELETING bit, set in the first loop, can be read in the second
loop instead of having to be recomputed. Plus, it was potentially
confusing having both update->flags and flags, which sometimes had
different values.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
That was the last caller, so delete function write_ref_sha1().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of what it does is unneeded from these call sites.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the first step towards separating the checking and writing of
the new reference value to committing the change.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During creation of the patch series our discussion we could have a
more descriptive name for the prerequisite for the test so it stays
unique when other limits of ulimit are introduced.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/write-refs-sooner-2.2:
ref_transaction_commit(): fix atomicity and avoid fd exhaustion
ref_transaction_commit(): remove the local flags variable
ref_transaction_commit(): inline call to write_ref_sha1()
rename_ref(): inline calls to write_ref_sha1() from this function
commit_ref_update(): new function, extracted from write_ref_sha1()
write_ref_to_lockfile(): new function, extracted from write_ref_sha1()
t7004: rename ULIMIT test prerequisite to ULIMIT_STACK_SIZE
update-ref: test handling large transactions properly
The old code was roughly
for update in updates:
acquire locks and check old_sha
for update in updates:
if changing value:
write_ref_to_lockfile()
commit_ref_update()
for update in updates:
if deleting value:
unlink()
rewrite packed-refs file
for update in updates:
if reference still locked:
unlock_ref()
This has two problems.
Non-atomic updates
==================
The atomicity of the reference transaction depends on all pre-checks
being done in the first loop, before any changes have started being
committed in the second loop. The problem is that
write_ref_to_lockfile() (previously part of write_ref_sha1()), which
is called from the second loop, contains two more checks:
* It verifies that new_sha1 is a valid object
* If the reference being updated is a branch, it verifies that
new_sha1 points at a commit object (as opposed to a tag, tree, or
blob).
If either of these checks fails, the "transaction" is aborted during
the second loop. But this might happen after some reference updates
have already been permanently committed. In other words, the
all-or-nothing promise of "git update-ref --stdin" could be violated.
So these checks have to be moved to the first loop.
File descriptor exhaustion
==========================
The old code locked all of the references in the first loop, leaving
all of the lockfiles open until later loops. Since we might be
updating a lot of references, this could result in file descriptor
exhaustion.
The solution
============
After this patch, the code looks like
for update in updates:
acquire locks and check old_sha
if changing value:
write_ref_to_lockfile()
else:
close_ref()
for update in updates:
if changing value:
commit_ref_update()
for update in updates:
if deleting value:
unlink()
rewrite packed-refs file
for update in updates:
if reference still locked:
unlock_ref()
This fixes both problems:
1. The pre-checks in write_ref_to_lockfile() are now done in the first
loop, before any changes have been committed. If any of the checks
fails, the whole transaction can now be rolled back correctly.
2. All lockfiles are closed in the first loop immediately after they
are created (either by write_ref_to_lockfile() or by close_ref()).
This means that there is never more than one open lockfile at a
time, preventing file descriptor exhaustion.
To simplify the bookkeeping across loops, add a new REF_NEEDS_COMMIT
bit to update->flags, which keeps track of whether the corresponding
lockfile needs to be committed, as opposed to just unlocked. (Since
"struct ref_update" is internal to the refs module, this change is not
visible to external callers.)
This change fixes two tests in t1400.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead, work directly with update->flags. This has the advantage that
the REF_DELETING bit, set in the first loop, can be read in the second
loop instead of having to be recomputed. Plus, it was potentially
confusing having both update->flags and flags, which sometimes had
different values.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
And remove the function write_ref_sha1(), as it is no longer used.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of what it does is unneeded from these call sites.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the first step towards separating the checking and writing of
the new reference value to committing the change.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During creation of the patch series, our discussion revealed that
we could have a more descriptive name for the prerequisite for the
test so it stays unique when other limits of ulimit are introduced.
Let's rename the existing ulimit about setting the stack size to
a more explicit ULIMIT_STACK_SIZE.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running "add -e", if launching the editor fails, we do
not notice and continue as if the output is what the user
asked for. The likely case is that the editor did not touch
the contents at all, and we end up adding everything.
Reported-by: Russ Cox <rsc@golang.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To get the name of all config variables in a given section we perform a
'git config --get-regex' query for all config variables containing the
name of that section, and then filter its output through a case statement
to throw away those that though contain but don't start with the given
section.
Modify the regex to match only at the beginning, so the case statement
becomes unnecessary and we can get rid of it. Add a test to check that a
match in the middle doesn't fool us.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently there are a few completion functions that perform similar 'git
config' queries and filtering to get config variable names: the completion
of pretty aliases, aliases, and remote groups for 'git remote update'.
Unify those 'git config' queries in a helper function to eliminate code
duplication.
Though the helper functions to get pretty aliases and alieses are reduced
to mere one-liner wrappers around the newly added function, keep these
helpers still, because users' completion functions out there might depend
on them. And they keep their callers a tad easier to read, too.
Add tests for the pretty alias and alias helper to show that they work
as before; not for the remote groups query, though, because that's not
extracted into a helper function and it's not worth the effort to do so
for a sole callsite.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usual "git diff" when seeing a file turning into a directory
showed a patchset to remove the file and create all files in the
directory, but "git diff --no-index" simply refused to work. Also,
when asked to compare a file and a directory, imitate POSIX "diff"
and compare the file with the file with the same name in the
directory, instead of refusing to run.
* jc/diff-no-index-d-f:
diff-no-index: align D/F handling with that of normal Git
diff-no-index: DWIM "diff D F" into "diff D/F F"
The default $HOME/.gitconfig file created upon "git config --global"
that edits it had incorrectly spelled user.name and user.email
entries in it.
* oh/fix-config-default-user-name-section:
config: fix settings in default_user_config template
"git commit --date=now" or anything that relies on approxidate lost
the daylight-saving-time offset.
* jc/epochtime-wo-tz:
parse_date_basic(): let the system handle DST conversion
parse_date_basic(): return early when given a bogus timestamp
Code clean-up for xdg configuration path support.
* pt/xdg-config-path:
path.c: remove home_config_paths()
git-config: replace use of home_config_paths()
git-commit: replace use of home_config_paths()
credential-store.c: replace home_config_paths() with xdg_config_home()
dir.c: replace home_config_paths() with xdg_config_home()
attr.c: replace home_config_paths() with xdg_config_home()
path.c: implement xdg_config_home()
Catch a programmer mistake to feed a pointer not an array to
ARRAY_SIZE() macro, by using a couple of GCC extensions.
* ep/do-not-feed-a-pointer-to-array-size:
git-compat-util.h: implement a different ARRAY_SIZE macro for for safely deriving the size of array
"hash-object --literally" introduced in v2.2 was not prepared to
take a really long object type name.
* jc/hash-object:
write_sha1_file(): do not use a separate sha1[] array
t1007: add hash-object --literally tests
hash-object --literally: fix buffer overrun with extra-long object type
git-hash-object.txt: document --literally option
The completion for "log --decorate=" parameter value was incorrect.
* sg/complete-decorate-full-not-long:
completion: fix and update 'git log --decorate=' options
"filter-branch" corrupted commit log message that ends with an
incomplete line on platforms with some "sed" implementations that
munge such a line. Work it around by avoiding to use "sed".
* jk/filter-branch-use-of-sed-on-incomplete-line:
filter-branch: avoid passing commit message through sed
"git daemon" fails to build from the source under NO_IPV6
configuration (regression in 2.4).
* jc/daemon-no-ipv6-for-2.4.1:
daemon: unbreak NO_IPV6 build regression
Some error messages in "git config" were emitted without calling
the usual error() facility.
* jn/clean-use-error-not-fprintf-on-stderr:
config: use error() instead of fprintf(stderr, ...)
Some time ago, "git blame" (incorrectly) lost the convert_to_git()
call when synthesizing a fake "tip" commit that represents the
state in the working tree, which broke folks who record the history
with LF line ending to make their project portabile across
platforms while terminating lines in their working tree files with
CRLF for their platform.
* tb/blame-resurrect-convert-to-git:
blame: CRLF in the working tree and LF in the repo
git p4 attempts to better handle branches in Perforce.
* va/p4-client-path:
git-p4: improve client path detection when branches are used
t9801: check git-p4's branch detection with client spec enabled
When "add--interactive" splits a hunk into two overlapping hunks
and then let the user choose only one, it sometimes feeds an
incorrect patch text to "git apply". Add tests to demonstrate
this.
I have a slight suspicion that this may be $gmane/87202 coming back
and biting us (I seem to have said "let's run with this and see
what happens" back then).
* mm/add-p-split-error:
stash -p: demonstrate failure of split with mixed y/n
t3904-stash-patch: factor PERL prereq at the top of the file
t3904-stash-patch: fix test description
add -p: demonstrate failure when running 'edit' after a split
t3701-add-interactive: simplify code
"git p4" learned "--changes-block-size <n>" to read the changes in
chunks from Perforce, instead of making one call to "p4 changes"
that may trigger "too many rows scanned" error from Perforce.
* ls/p4-changes-block-size:
git-p4: use -m when running p4 changes
Memory usage of "git index-pack" has been trimmed by tens of
per-cent.
* nd/slim-index-pack-memory-usage:
index-pack: kill union delta_base to save memory
index-pack: reduce object_entry size to save memory
"git rev-list --objects $old --not --all" to see if everything that
is reachable from $old is already connected to the existing refs
was very inefficient.
* jk/still-interesting:
limit_list: avoid quadratic behavior from still_interesting
An earlier rewrite to use strbuf_getwholeline() instead of fgets(3)
to read packed-refs file revealed that the former is unacceptably
inefficient.
* jk/reading-packed-refs:
t1430: add another refs-escape test
read_packed_refs: avoid double-checking sane refs
strbuf_getwholeline: use getdelim if it is available
strbuf_getwholeline: avoid calling strbuf_grow
strbuf_addch: avoid calling strbuf_grow
config: use getc_unlocked when reading from file
strbuf_getwholeline: use getc_unlocked
git-compat-util: add fallbacks for unlocked stdio
strbuf_getwholeline: use getc macro
Many long-running operations show progress eye-candy, even when
they are later backgrounded. Hide the eye-candy when the process
is sent to the background instead.
* lm/squelch-bg-progress:
compat/mingw: stubs for getpgid() and tcgetpgrp()
progress: no progress in background
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
Tweak the sample "store" backend of the credential helper to honor
XDG configuration file locations when specified.
* pt/credential-xdg:
t0302: "unreadable" test needs POSIXPERM
t0302: test credential-store support for XDG_CONFIG_HOME
git-credential-store: support XDG_CONFIG_HOME
git-credential-store: support multiple credential files
Now that lock_ref_sha1_basic() gives us back its error messages via a
strbuf, incorporate its error message into our error message rather
than emitting two separate error messages.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
While we are in the area, let's remove a superfluous definite article
from the error message that is emitted when the reference cannot be
locked. This improves how it reads and makes it a bit shorter.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Now that lock_ref_sha1_basic() gives us back its error messages via a
strbuf, incorporate its error message into our error message rather
than emitting one error messages to stderr immediately and returning a
second to our caller.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Now that lock_ref_sha1_basic() gives us back its error messages via a
strbuf, incorporate its error message into our error message rather
than emitting two separate error messages.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
If there is a failure to lock a reference that is likely caused by a
D/F conflict (e.g., trying to lock "refs/foo/bar" when reference
"refs/foo" already exists), invoke verify_refname_available() to try
to generate a more helpful error message.
That function might not detect an error. For example, some
non-reference file might be blocking the deletion of an
otherwise-empty directory tree, or there might be a race with another
process that just deleted the offending reference. In such cases,
generate the strerror-based error message like before.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
For now, change the callers to spew the error to stderr like before.
But soon we will change them to incorporate the reason for the failure
into their own error messages.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
It shouldn't be spewing errors directly to stderr.
For now, change its callers to spew the errors to stderr.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Rename is_refname_available() to verify_refname_available() and change
its return value from 1 for success to 0 for success, to be consistent
with our error-handling convention. In a moment it will also get a
"struct strbuf *err" parameter.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
If two references that D/F conflict (e.g., "refs/foo" and
"refs/foo/bar") are created in a single transaction, the old code
discovered the problem only after the "commit" phase of
ref_transaction_commit() had already begun. This could leave some
references updated and others not, which violates the promise of
atomicity.
Instead, check for such conflicts during the "locking" phase:
* Teach is_refname_available() to take an "extras" parameter that can
contain extra reference names with which the specified refname must
not conflict.
* Change lock_ref_sha1_basic() to take an "extras" parameter, which it
passes through to is_refname_available().
* Change ref_transaction_commit() to pass "affected_refnames" to
lock_ref_sha1_basic() as its "extras" argument.
This change fixes a test case in t1404.
This code is a bit stricter than it needs to be. We could conceivably
allow reference "refs/foo/bar" to be created in the same transaction
as "refs/foo" is deleted (or vice versa). But that would be
complicated to implement, because it is not possible to lock
"refs/foo/bar" while "refs/foo" exists as a loose reference, but on
the other hand we don't want to delete some references before adding
others (because that could leave a gap during which required objects
are unreachable). There is also a complication that reflog files'
paths can conflict.
Any less-strict implementation would probably require tricks like the
packing of all references before the start of the real transaction, or
the use of temporary intermediate reference names.
So for now let's accept too-strict checks. Some reference update
transactions will be rejected unnecessarily, but they will be rejected
in their entirety rather than leaving the repository in an
intermediate state, as would happen now.
Please note that there is still one kind of D/F conflict that is *not*
handled correctly. If two processes are running at the same time, and
one tries to create "refs/foo" at the same time that the other tries
to create "refs/foo/bar", then they can race with each other. Both
processes can obtain their respective locks ("refs/foo.lock" and
"refs/foo/bar.lock"), proceed to the "commit" phase of
ref_transaction_commit(), and then the slower process will discover
that it cannot rename its lockfile into place (after possibly having
committed changes to other references). There appears to be no way to
fix this race without changing the locking policy, which in turn would
require a change to *all* Git clients.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Detect duplicates by storing the reference names in a string_list and
sorting that, instead of sorting the ref_updates directly.
* In a moment the string_list will be used for another purpose, too.
* This removes the need for the custom comparison function
ref_update_compare().
* This means that we can carry out the updates in the order that the
user specified them instead of reordering them. This might be handy
someday if, we want to permit multiple updates to a single reference
as long as they are compatible with each other.
Note: we can't use string_list_remove_duplicates() to check for
duplicates, because we need to know the name of the reference that
appeared multiple times, to be used in the error message.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
In the first loop (over prefixes of refname), use dirname to keep
track of the current prefix. This is not an improvement in itself, but
in a moment we will start using dirname for a role where a
NUL-terminated string is needed.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Now that we don't need a ref_entry to pass to
report_refname_conflict(), it is sufficient to store the refname of
the conflicting reference.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
It wasn't pulling its weight. And we are about to need code similar to
this where no ref_entry is available and with more diverse error
messages. Rather than try to generalize the function, just inline it.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
It wasn't pulling its weight. And in a moment we will need similar
tests that take a refname rather than a ref_entry as parameter, which
would have made entry_matches() even less useful.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
This change wouldn't be worth it by itself, but in a moment we will
use the strbuf for more string juggling.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
The function had a "dir" parameter that was shadowed by a local "dir"
variable within a code block. Use the former in place of the latter.
(This is consistent with "dir"'s use elsewhere in the function.)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Change the comments to a running example of running the function with
refname set to "refs/foo/bar". Add some more explanation of the logic.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Add some tests of reference D/F conflicts (by which I mean the fact
that references like "refs/foo" and "refs/foo/bar" are not allowed to
coexist) in the context of reference transactions.
The test of creating two conflicting references in the same
transaction fails, leaving the transaction half-completed. This will
be fixed later in this patch series.
Please note that the error messages emitted in the case of conflicts
are not very user-friendly. In particular, when the conflicts involve
loose references, then the errors are reported as
error: there are still refs under 'refs/foo'
fatal: Cannot lock the ref 'refs/foo'.
or
error: unable to resolve reference refs/foo/bar: Not a directory
fatal: Cannot lock the ref 'refs/foo/bar'.
This is because lock_ref_sha1_basic() fails while trying to lock the
new reference, before it even gets to the is_refname_available()
check. This situation will also be improved later in this patch
series.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
The 'lock_fd' is the same as 'lk->fd'. No need to store it twice so remove
it.
No functional changes intended.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The overwhelming majority of lines were single space aligned,
except a few ones aligned by tabs. Fix inconsistency by using
single space everywhere.
Signed-off-by: Sébastien Guimmara <sebastien.guimmara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'echo -n' is not portable, but this script used it as a way to give
a string followed by a carriage return for progress messages.
Introduce a new helper shell function "progress" and use printf as a
more portable way to do this. As a side effect, this makes it
unnecessary to have a raw CR in our source, which can be munged in
some shells. For example, MsysGit trims CR before executing a shell
script file in order to make it work right on Windows even if it
uses CRLF as linefeeds.
While at it, replace "echo" using printf in debug() and say() to
eliminate the temptation of reintroducing the same bug.
Signed-off-by: Danny Lin <danny0838@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git about a new option, "http.sslCipherList", which permits one to
specify a list of ciphers to use when negotiating SSL connections. The
setting can be overwridden by the GIT_SSL_CIPHER_LIST environment
variable.
Signed-off-by: Lars Kellogg-Stedman <lars@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `verify` and `create` subcommands of the bundle builtin do
not properly verify the command line arguments that have been
passed in. While the `verify` subcommand accepts an arbitrary
amount of ignored arguments the `create` subcommand does not
complain about being passed too few arguments, resulting in a
bogus call to `git rev-list`. Fix these errors by verifying that
the correct amount of arguments has been passed in.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation says that --squash is for 'add', 'merge',
'pull' and 'push', while --squash actually doesn't change
the behavior of 'push'. Correct the documentation.
Signed-off-by: Danny Lin <danny0838@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we built git without curl, we can't actually test against
an http server. In fact, all of the test scripts which
include lib-httpd.sh already perform this check, with one
exception: t5540. For those scripts, this is a noop, and for
t5540, this is a bugfix (it used to fail when built with
NO_CURL, though it could go unnoticed if you had a stale
git-remote-https in your build directory).
Noticed-by: Junio C Hamano <junio@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't offer the "main" 'git credential' command or any of the credential
helpers from contrib/credential/ when completing git commands.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git cat-file' throws an error while trying to print the type or
size of a broken/corrupt object. This is because these objects are
usually of unknown types.
Teach git cat-file a '--allow-unknown-type' option where it prints
the type or size of a broken/corrupt object without throwing
an error.
Modify '-t' and '-s' options to call sha1_object_info_extended()
directly to support the '--allow-unknown-type' option.
Add documentation for 'cat-file --allow-unknown-type'.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
cat-file: add documentation for '--allow-unknown-type' option.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only parse the options if 2 or 3 arguments are specified.
Update 'struct option options[]' to use OPT_CMDMODE rather than
OPT_SET_INT to allow only one mutually exclusive option and avoid the
need for checking number of arguments. This was written by Junio C Hamano,
tested by me.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update sha1_loose_object_info() to optionally allow it to read
from a loose object file of unknown/bogus type; as the function
usually returns the type of the object it read in the form of enum
for known types, add an optional "typename" field to receive the
name of the type in textual form and a flag to indicate the reading
of a loose object file of unknown/bogus type.
Add parse_sha1_header_extended() which acts as a wrapper around
parse_sha1_header() allowing more information to be obtained.
Add unpack_sha1_header_to_strbuf() to unpack sha1 headers of
unknown/corrupt objects which have a unknown sha1 header size to
a strbuf structure. This was written by Junio C Hamano but tested
by me.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Hepled-by: Jeff King <peff@peff.net>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -r -d" mentions "delete remote branch", which should be
"remote-tracking branch".
Signed-off-by: Danny Lin <danny0838@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
home_config_paths() combines distinct functionality already implemented
by expand_user_path() and xdg_config_home(), and it also hard-codes the
path ~/.gitconfig, which makes it unsuitable to use for other home
config file paths. Since its use will just add unnecessary complexity to
the code, remove it.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since home_config_paths() combines distinct functionality already
implemented by expand_user_path() and xdg_config_home(), and hides the
home config file path ~/.gitconfig. Make the code more explicit by
replacing the use of home_config_paths() with expand_user_path() and
xdg_config_home().
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since home_config_paths() combines two distinct functionality already
implemented by expand_user_path() and xdg_config_home(), and hides the
home config file path ~/.gitconfig. Make the code more explicit by
replacing the use of home_config_paths() with expand_user_path() and
xdg_config_home().
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since only the xdg credentials file path is required, and
home_config_paths() is unable to construct the path ~/.git-credentials,
simplify the code by replacing home_config_paths() with
xdg_config_home().
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since only the xdg excludes file path is required, simplify the code by
replacing use of home_config_paths() with xdg_config_home().
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since only the xdg attributes file path is required, simplify the code
by using xdg_config_home() instead of home_config_paths().
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The XDG base dir spec[1] specifies that configuration files be stored in
a subdirectory in $XDG_CONFIG_HOME. To construct such a configuration
file path, home_config_paths() can be used. However, home_config_paths()
combines distinct functionality:
1. Retrieve the home git config file path ~/.gitconfig
2. Construct the XDG config path of the file specified by `file`.
This function was introduced in commit 21cf3227 ("read (but not write)
from $XDG_CONFIG_HOME/git/config file"). While the intention of the
function was to allow the home directory configuration file path and the
xdg directory configuration file path to be retrieved with one function
call, the hard-coding of the path ~/.gitconfig prevents it from being
used for other configuration files. Furthermore, retrieving a file path
relative to the user's home directory can be done with
expand_user_path(). Hence, it can be seen that home_config_paths()
introduces unnecessary complexity, especially if a user just wants to
retrieve the xdg config file path.
As such, implement a simpler function xdg_config_home() for constructing
the XDG base dir spec configuration file path. This function, together
with expand_user_path(), can replace all uses of home_config_paths().
[1] http://standards.freedesktop.org/basedir-spec/basedir-spec-0.7.html
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Access to objects in repositories that borrow from another one on a
slow NFS server unnecessarily got more expensive due to recent code
becoming more cautious in a naive way not to lose objects to pruning.
* jk/prune-mtime:
sha1_file: only freshen packs once per run
sha1_file: freshen pack objects before loose
reachable: only mark local objects as recent
Teach the codepaths that read .gitignore and .gitattributes files
that these files encoded in UTF-8 may have UTF-8 BOM marker at the
beginning; this makes it in line with what we do for configuration
files already.
* cn/bom-in-gitignore:
attr: skip UTF8 BOM at the beginning of the input file
config: use utf8_bom[] from utf.[ch] in git_parse_source()
utf8-bom: introduce skip_utf8_bom() helper
add_excludes_from_file: clarify the bom skipping logic
dir: allow a BOM at the beginning of exclude files
"git commit --date=now" or anything that relies on approxidate lost
the daylight-saving-time offset.
* jc/epochtime-wo-tz:
parse_date_basic(): let the system handle DST conversion
parse_date_basic(): return early when given a bogus timestamp
The default $HOME/.gitconfig file created upon "git config --global"
that edits it had incorrectly spelled user.name and user.email
entries in it.
* oh/fix-config-default-user-name-section:
config: fix settings in default_user_config template
"git cat-file bl $blob" failed to barf even though there is no
object type that is "bl".
* jk/type-from-string-gently:
type_from_string_gently: make sure length matches
* ld/p4-filetype-detection:
git-p4: fix filetype detection on files opened exclusively
git-p4: small fix for locked-file-move-test
git-p4: fix small bug in locked test scripts
We avoid setting core.worktree when the repository location is the
".git" directory directly at the top level of the working tree, but
the code misdetected the case in which the working tree is at the
root level of the filesystem (which arguably is a silly thing to
do, but still valid).
* jk/init-core-worktree-at-root:
init: don't set core.worktree when initializing /.git
"git show-branch --topics HEAD" (with no other arguments) did not
do anything interesting. Instead, contrast the given revision
against all the local branches by default.
* mh/show-branch-topic:
show-branch: show all local heads when only giving one rev along --topics
The usual "git diff" when seeing a file turning into a directory
showed a patchset to remove the file and create all files in the
directory, but "git diff --no-index" simply refused to work. Also,
when asked to compare a file and a directory, imitate POSIX "diff"
and compare the file with the file with the same name in the
directory, instead of refusing to run.
* jc/diff-no-index-d-f:
diff-no-index: align D/F handling with that of normal Git
diff-no-index: DWIM "diff D F" into "diff D/F F"
Identify parts of the code that knows that we use SHA-1 hash to
name our objects too much, and use (1) symbolic constants instead
of hardcoded 20 as byte count and/or (2) use struct object_id
instead of unsigned char [20] for object names.
* bc/object-id:
apply: convert threeway_stage to object_id
patch-id: convert to use struct object_id
commit: convert parts to struct object_id
diff: convert struct combine_diff_path to object_id
bulk-checkin.c: convert to use struct object_id
zip: use GIT_SHA1_HEXSZ for trailers
archive.c: convert to use struct object_id
bisect.c: convert leaf functions to use struct object_id
define utility functions for object IDs
define a structure for object IDs
To get number of elements in an array git use the ARRAY_SIZE macro
defined as:
#define ARRAY_SIZE(x) (sizeof(x)/sizeof((x)[0]))
The problem with it is a possibility of mistakenly passing to it a
pointer instead an array. The ARRAY_SIZE macro as conventionally
defined does not provide good type-safety and the open-coded
approach is more fragile, more verbose and provides no improvement in
type-safety.
Use instead a different but compatible ARRAY_SIZE() macro,
which will also break compile if you try to
use it on a pointer. This implemention revert to the original code
if the compiler doesn't know the typeof and __builtin_types_compatible_p
GCC extensions.
This can ensure our code is robust to changes, without
needing a gratuitous macro or constant. A similar
ARRAY_SIZE implementation also exists in the linux kernel.
Credits to Rusty Russell and his ccan library.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 01cec54e (daemon: deglobalize hostname information, 2015-03-07)
wrapped the global variables such as hostname inside a struct, it
forgot to convert one location that spelled "hostname" that needs to
be updated to "hi->hostname".
This was inside NO_IPV6 block, and was not caught by anybody.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of d089ebaa (setup: sanitize absolute and funny paths in
get_pathspec(), 2008-01-28), prefix_path() always returns a
newly allocated string, so callers should free its result.
Additionally, drop the const from variables to which the result of
the prefix_path() is assigned, so they can be free()'d without
having to cast-away the constness.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the beginning, write_sha1_file() did not have a way to tell the
caller the name of the object it wrote to the caller. This was
changed in d6d3f9d0 (This implements the new "recursive tree"
write-tree., 2005-04-09) by adding the "returnsha1" parameter to the
function so that the callers who are interested in the value can
optionally pass a pointer to receive it.
It turns out that all callers do want to know the name of the object
it just has written. Nobody passes a NULL to this parameter, hence
it is not necessary to use a separate sha1[] array to receive the
result from write_sha1_file_prepare(), and copy the result to the
returnsha1 supplied by the caller.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-hash-object learned a --literally option in 5ba9a93
(hash-object: add --literally option, 2014-09-11). Check that
--literally allows object creation with a bogus type, with two
type strings whose length is reasonably short and very long.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"hash-object" learned in 5ba9a93 (hash-object: add --literally
option, 2014-09-11) to allow crafting a corrupt/broken object of
unknown type.
When the user-provided type is particularly long, however, it can
overflow the relatively small stack-based character array handed to
write_sha1_file_prepare() by hash_sha1_file() and write_sha1_file(),
leading to stack corruption (and crash). Introduce a custom helper
to allow arbitrarily long typenames just for "hash-object --literally".
[jc: Eric's original used a strbuf in the more common codepaths, and
I rewrote it to avoid penalizing the non-literally code. Bugs are mine]
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The die() / error() / warning() helpers put a fatal: / error: /
warning: prefix in front of the error message they print describing
the message's severity, which users are likely to be accustomed to
seeing these days.
This change will also be useful when marking the message for
translation: the argument to error() includes no newline at the end,
so it is less fussy for translators to translate without lines running
together in the translated output.
While we're here, start the error messages with a lowercase letter to
match the usual typography of error messages.
A quick web search and a code search at codesearch.debian.net finds no
scripts trying to parse these error messages, so this change should be
safe.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the git-hash-object --literally option added by 5ba9a93
(hash-object: add --literally option, 2014-09-11).
While here, also correct a minor typesetting oversight.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, 9c9b4f2f (standardize usage info string format, 2015-01-13)
tried to make usage-string in line with the documentation by
- Placing angle brackets around fill-in-the-blank parameters
- Putting dashes in multiword parameter names
- Adding spaces to [-f|--foobar] to make [-f | --foobar]
- Replacing <foobar>* with [<foobar>...]
but it missed a few places.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git log --decorate=' understands the 'full', 'short' and 'no' options.
From these the completion script only offered 'short' and it offered
'long' instead of 'full'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During lazy-initialization of the lists of all commands and porcelain
commands the function __git_compute_all_commands() is called twice. The
relevant part of the call sequence looks like this:
__git_compute_porcelain_commands()
__git_compute_all_commands()
<finds list of all commands uninitialized>
__git_list_all_commands()
<initializes list of all commands>
__git_list_porcelain_commands()
__git_compute_all_commands()
<finds list of all commands already initialized, does nothing>
<filters porcelains from list of all commands>
Either one of the two calls could be removed and the initialization of
both command lists would still work as a whole, but let's remove the call
from __git_compute_porcelain_commands(), because this way
__git_list_porcelain_commands() will keep working in itself.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we read the remote config from disk, we update a
default_remote_name variable if we see branch.*.remote
config for the current branch. This isn't wrong, or even all
that complicated, but it is a bit simpler (because it
reduces our overall state) to just lazily compute the
default when we need it.
The ulterior motive here is that the push config uses a
similar structure, and _is_ much more complicated as a
result. That will be simplified in a future patch, and it's
more readable if the logic for remotes and push-remotes
matches.
Note that we also used default_remote_name as a signal that
the remote config has been loaded; after this patch, we now
use an explicit flag.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "--" is lacking from the command line and a command can take
both revs and paths, the idea is if an argument can be seen as both
an extended SHA-1 and a path, then "--" is required or git refuses
to continue. It's currently implemented as:
(1) if an argument is rev, then it must not exist in worktree
(2) else, it must exist in worktree
(3) else, "--" is required.
These rules work for literal paths, but when non-literal pathspec is
involved, it almost always requires the user to add "--" because it
fails (2) and (1) is really rarely met (take "*.c" for example, (1)
is met if there is a ref named "*.c").
This patch modifies the rules a bit by considering any valid (*)
wildcard pathspec "exist in worktree". The rules become:
(1) if an arg is a rev, then it must either exist in worktree or
not be a valid wildcard pathspec.
(2) else, it either exists in worktree or is a wildcard pathspec
(3) else, "--" is required.
With the new rules, "--" is not needed most of the time when
wildcard pathspec is involved.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A typical setup under Windows is to set core.eol to CRLF, and text
files are marked as "text" in .gitattributes, or core.autocrlf is
set to true.
After 4d4813a5 "git blame" no longer works as expected for such a
set-up. Every line is annotated as "Not Committed Yet", even though
the working directory is clean. This is because the commit removed
the conversion in blame.c for all files, with or without CRLF in the
repo.
Having files with CRLF in the repo and core.autocrlf=input is a
temporary situation, and the files, if committed as is, will be
normalized in the repo, which _will_ be a notable change. Blaming
them with "Not Committed Yet" is the right result. Revert commit
4d4813a5 which was a misguided attempt to "solve" a non-problem.
Add two test cases in t8003 to verify the correct CRLF conversion.
Suggested-By: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes an error that manifests itself if the user opens the
"List references" window and the closes it, and subsequently opens
the Preferences window and changes one of the colors. When the
user clicks OK, and error popup appears with the message:
Error: invalid command name ".showrefs.list"
This is because .showrefs.list was added to the list of windows to
be notified on foreground/background color changes, but the window
no longer exists. We fix the bug by checking whether the window
exists before trying to change its colors. As an optimization, we
also avoid adding the .showrefs.list window to the list a second
time.
Signed-off-by: Paul Mackerras <paulus@samba.org>
We had this in "git merge" manual for eternity:
'git merge' <msg> HEAD <commit>...
[This] syntax (<msg> `HEAD` <commit>...) is supported for
historical reasons. Do not use it from the command line or in
new scripts. It is the same as `git merge -m <msg> <commit>...`.
With the update to "git merge" to make it understand what is
recorded in FETCH_HEAD directly, including Octopus merge cases, we
now can rewrite the use of this syntax in "git pull" with a simple
"git merge FETCH_HEAD".
Also there are quite a few fallouts in the test scripts, and it
turns out that "git cvsimport" also uses this old syntax to record
a merge.
Judging from this result, I would not be surprised if dropping the
support of the old syntax broke scripts people have written and been
relying on for the past ten years. But at least we can start the
deprecation process by throwing a warning message when the syntax is
used.
With luck, we might be able to drop the support in a few years.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The collect_parents() function now is responsible for
1. parsing the commits given on the command line into a list of
commits to be merged;
2. filtering these parents into independent ones; and
3. optionally calling fmt_merge_msg() via prepare_merge_message()
to prepare an auto-generated merge log message, using fake
contents that FETCH_HEAD would have had if these commits were
fetched from the current repository with "git pull . $args..."
Make "git merge FETCH_HEAD" to be the same as the traditional
git merge "$(git fmt-merge-msg <.git/FETCH_HEAD)" $commits
invocation of the command in "git pull", where $commits are the ones
that appear in FETCH_HEAD that are not marked as not-for-merge, by
making it do a bit more, specifically:
- noticing "FETCH_HEAD" is the only "commit" on the command line
and picking the commits that are not marked as not-for-merge as
the list of commits to be merged (substitute for step #1 above);
- letting the resulting list fed to step #2 above;
- doing the step #3 above, using the contents of the FETCH_HEAD
instead of fake contents crafted from the list of commits parsed
in the step #1 above.
Note that this changes the semantics. "git merge FETCH_HEAD" has
always behaved as if the first commit in the FETCH_HEAD file were
directly specified on the command line, creating a two-way merge
whose auto-generated merge log said "merge commit xyz". With this
change, if the previous fetch was to grab multiple branches (e.g.
"git fetch $there topic-a topic-b"), the new world order is to
create an octopus, behaving as if "git pull $there topic-a topic-b"
were run. This is a deliberate change to make that happen, and
can be seen in the changes to t3033 tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to pass the list of parents to fmt_merge_msg(), cmd_merge()
uses this strbuf to create something that look like FETCH_HEAD that
describes commits that are being merged. This is necessary only
when we are creating the merge commit message ourselves, but was
done unconditionally.
Move the variable and the logic to populate it to confine them in a
block that needs them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The latter does two separate things:
- Parse the list of commits on the command line, and formulate the
list of commits to be merged (including the current HEAD);
- Compute the list of parents to be recorded in the resulting merge
commit.
Split the latter into a separate helper function, so that we can
later supply the list commits to be merged from a different source
(namely, FETCH_HEAD).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify this small function in three ways.
- The function initially collects all commits to be merged into a
commit_list "remoteheads"; the "remotes" pointer always points at
the tail of this list (either the remoteheads variable itself, or
the ->next slot of the element at the end of the list) to help
elongate the list by repeated calls to commit_list_insert().
Because the new element appended by commit_list_insert() will
always have its ->next slot NULLed out, there is no need for us
to assign NULL to *remotes to terminate the list at the end.
- The variable "head_subsumed" always confused me every time I read
this code. What is happening here is that we inspect what the
caller told us to merge (including the current HEAD) and come up
with the list of parents to be recorded for the resulting merge
commit, omitting commits that are ancestor of other commits.
This filtering may remove the current HEAD from the resulting
parent list---and we signal that fact with this variable, so that
we can later record it as the first parent when "--no-ff" is in
effect.
- The "parents" list is created for this function by reduce_heads()
and was not deallocated after its use, even though the loop
control was written in such a way to allow us to do so by taking
the "next" element in a separate variable so that it can be used
in the next-step part of the loop control.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing a merged object name like "foo~20" to formulate a merge
summary "Merge branch foo (early part)", a temporary strbuf is used,
but we forgot to deallocate it when we failed to find the named
branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To reject merging multiple commits into an unborn branch, we check
argc, thinking that collect_parents() that reads the remaining
command line arguments from <argc, argv> will give us the same
number of commits as its input, i.e. argc.
Because what we really care about is the number of commits, let the
function run and then make sure it returns only one commit instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of having it as one of the three if/elseif/.. case arms,
test the condition and handle this special case upfront. This makes
it easier to follow the flow of logic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code comment for "git merge" in builtin/merge.c, we say
If the merged head is a valid one there is no reason
to forbid "git merge" into a branch yet to be born.
We do the same for "git pull".
and t5520 does have an existing test for that behaviour. However,
there was no test to make sure that 'git pull' to pull multiple
branches into an unborn branch must fail.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix style funnies in early part of this test script that checks "git
pull" into an unborn branch. The primary change is that 'chdir' to
a newly created empty test repository is now protected by being done
in a subshell to make it more robust without having to chdir back to
the original place.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the first things cmd_merge() does is to see if the "--abort"
option is given and run "reset --merge" and exit. When the control
reaches this point, we know "--abort" was not given.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We seem to have tests for specific merge strategy backends
(e.g. recursive), but not much test coverage for the "git merge"
itself. As I am planning to update the semantics of merging
"FETCH_HEAD" in such a way that these two
git pull . topic_a topic_b...
vs.
git fetch . topic_a topic_b...
git merge FETCH_HEAD
are truly equivalent, let me add a few test cases to cover the
tricky ones.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some systems (like OS X), if sed encounters input without
a trailing newline, it will silently add it. As a result,
"git filter-branch" on such systems may silently rewrite
commit messages that omit a trailing newline. Even though
this is not something we generate ourselves with "git
commit", it's better for filter-branch to preserve the
original data as closely as possible.
We're using sed here only to strip the header fields from
the commit object. We can accomplish the same thing with a
shell loop. Since shell "read" calls are slow (usually one
syscall per byte), we use "cat" once we've skipped past the
header. Depending on the size of your commit messages, this
is probably faster (you pay the cost to fork, but then read
the data in saner-sized chunks). This idea is shamelessly
stolen from Junio.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebase--interactive processes a task, it removes the item from
the todo list and appends it to another list of executed tasks. If a
pick (this includes squash and fixup) fails before the index has
recorded the changes, take the corresponding item and put it on the todo
list again. Otherwise, the changes introduced by the scheduled commit
would be lost.
That kind of decision is possible since the cherry-pick command
signals why it failed to apply the changes of the given commit. Either
the changes are recorded in the index using a conflict (return value 1)
and rebase does not continue until they are resolved or the changes
are not recorded in the index (return value neither 0 nor 1) and
rebase has to try again with the same task.
Add a test cases for regression testing to the "rebase-interactive"
test suite.
Signed-off-by: Fabian Ruch <bafain@gmail.com>
Signed-off-by: Phil Hord <hordp@cisco.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the feature has had time to prove itself, and any
topics in flight have had a chance to clean up any broken
&&-chains, we can flip this feature on by default. This
makes one less thing submitters need to configure or check
before sending their patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git_connect function has code to handle plink and tortoiseplink
specially, as they require different command line arguments from
OpenSSH (-P instead of -p for ports; tortoiseplink additionally requires
-batch). However, the match was done by checking for "plink" anywhere
in the string, which led to a GIT_SSH value containing "uplink" being
treated as an invocation of putty's plink.
Improve the check by looking for "plink" or "tortoiseplink" (or those
names suffixed with ".exe") only in the final component of the path.
This has the downside that a program such as "plink-0.63" would no
longer be recognized, but the increased robustness is likely worth it.
Add tests to cover these cases to avoid regressions.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests in t5601 used single quotes to delimit an argument
containing spaces. However, this caused test_expect_success to be
passed three arguments instead of two, which in turn caused the test
name to be treated as a prerequisite instead of a test name. As there
was no prerequisite called "bracketed hostnames are still ssh", the test
was always skipped.
Because this test was always skipped, the fact that it passed the
arguments in the wrong order was obscured. Use double quotes inside the
test and reorder the arguments so that the test runs and properly
reflects the arguments that are passed to ssh.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code path used in git_connect pushed the majority of the SSH
connection code into an else block, even though the if block returns.
Simplify the code by eliminating the else block, as it is unneeded.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brian Carson noticed that a test piece in t5601 had a pair of single
quotes in the body, which made it into 4 parameter call to
test_expect_success, as if its test title were a prerequisite.
As the prerequisites have a specific syntax (i.e. comma separated
tokens spelled in capital letters, possibly prefixed with ! for
negation), validate them to catch such a mistake in the future.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When p4d runs on a case-folding OS, git-p4 can end up getting
very confused. This adds failing tests to demonstrate the problem.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test_lazy_prereq to setup prerequisites for the p4 move
test. This both makes the test simpler and clearer, and also
means it no longer fails the new --chain-lint tests.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the branch to be rebased is already up to date, we
"git checkout" the branch, print an "up to date" message,
and end the rebase early. However, our checkout may print
"Switched to branch 'foo'" or "Already on 'foo'", even if
the user has asked for "--quiet".
We should avoid printing these messages at all, "--quiet" or
no. Since the rebase is a noop, this checkout can be seen as
optimizing out these other two checkout operations (that
happen in a real rebase):
1. Moving to the detached HEAD to start the rebase; we
always feed "-q" to checkout there, and instead rely on
our own custom message (which respects --quiet).
2. Finishing a rebase, where we move to the final branch.
Here we actually use update-ref rather than
git-checkout, and produce no messages.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only changes are to the README files, most notably the list of
maintainers and the project URL.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier update to the parser that disects a URL broke an
address, followed by a colon, followed by an empty string (instead
of the port number), e.g. ssh://example.com:/path/to/repo.
* tb/connect-ipv6-parse-fix:
connect.c: ignore extra colon after hostname
The completion script (in contrib/) contaminated global namespace
and clobbered on a shell variable $x.
* ma/bash-completion-leaking-x:
completion: fix global bash variable leak on __gitcompappend
The "git push --signed" protocol extension did not limit what the
"nonce" that is a server-chosen string can contain or how long it
can be, which was unnecessarily lax. Limit both the length and the
alphabet to a reasonably small space that can still have enough
entropy.
* jc/push-cert:
push --signed: tighten what the receiving end can ask to sign
The `-v` shows a unified diff in the editor to edit the commit
message to help the user to describe the change. The diff is
stripped and will not become a part of the commit message.
Add a note about this with the `-v` description and slightly modify
the description for the default `--cleanup` mode.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"new safer autocrlf handling":
- Check if eols in a file are converted at commit, when the file has
CR (or CRLF) in the repo (technically speaking in the index).
- Add a test-file repoMIX with mixed line-endings.
- When converting LF->CRLF or CRLF->LF: check the warnings
checkout_files():
- Checking out CRLF_nul and checking for eol coversion does not
make much sense (CRLF will stay CRLF).
- Use the file LF_nul instead: It is handled a binary in "auto" modes,
and when declared as text the LF may be replaced with CRLF, depending
on the configuration.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document `git status -v`, including its new doubled `-vv` form.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make many textual tweaks to the 2.4.0 release notes.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Todo list" is the name that is used in the user-facing documentation.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perforce allows client side file/directory remapping through
the use of the client view definition that is part of the
user's client spec.
To support this functionality while branch detection is
enabled it is important to determine the branch location in
the workspace such that the correct files are patched before
Perforce submission. Perforce provides a command that
facilitates this process: p4 where.
This patch does two things to fix improve file location
detection when git-p4 has branch detection and use of client
spec enabled:
1. Enable usage of "p4 where" when Perforce branches exist
in the git repository, even when client specification is
used. This makes use of the already existing function
p4Where.
2. Allow identifying partial matches of the branch's depot
path while processing the output of "p4 where". For
robustness, paths will only match if ending in "/...".
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$GIT_DIR/info/exclude and core.excludesfile (which falls back to
$XDG_HOME/git/ignore) are both ways to override the ignore pattern
lists given by the project in .gitignore files. The former, which
is per-repository personal preference, should take precedence over
the latter, which is a personal preference default across different
repositories that are accessed from that machine. The existing
documentation also agrees.
However, the precedence order was screwed up between these two from
the very beginning when 896bdfa2 (add: Support specifying an
excludes file with a configuration variable, 2007-02-27) introduced
core.excludesfile variable.
Noticed-by: Yohei Endo <yoheie@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "git" wrapper is invoked, we prepend the baked-in
exec-path to our PATH, so that any sub-processes we exec
will all find the git-foo commands that match the wrapper
version.
If you invoke git with an absolute path, like:
/usr/bin/git foo
we also prepend "/usr/bin" to the PATH. This was added long
ago by by 231af83 (Teach the "git" command to handle some
commands internally, 2006-02-26), with the intent that
things would just work if you did something like:
cd /opt
tar xzf premade-git-package.tar.gz
alias git=/opt/git/bin/git
as we would then find all of the related external commands
in /opt/git/bin. I.e., it made git runtime-relocatable,
since at the time of 231af83, we installed all of the git
commands into $(bindir). But these days, that is not enough.
Since f28ac70 (Move all dashed-form commands to libexecdir,
2007-11-28), we do not put commands into $(bindir), and you
actually need to convert "/usr/bin" into "/usr/libexec". And
not just for finding binaries; we want to find $(sharedir),
etc, the same way. The RUNTIME_PREFIX build knob does this
the right way, by assuming a sane hierarchy rooted at
"$prefix" when we run "$prefix/bin/git", and inferring
"$prefix/libexec/git-core", etc.
So this feature (prepending the argv[0] dirname to the PATH)
is broken for providing a runtime prefix, and has been for
many years. Does it do anything for other cases?
For the "git" wrapper itself, as well as any commands
shipped by "git", the answer is no. Those are already in
git's exec-path, which is consulted first. For third-party
commands which you've dropped into the same directory, it
does include them. So if you do
cd /opt
tar xzf git-built-specifically-for-opt-git.tar.gz
cp third-party/git-foo /opt/git/bin/git-foo
alias git=/opt/git/bin/git
it does mean that we will find the third-party "git-foo",
even if you do not put /opt/git/bin into your $PATH. But
the flipside of this is that we will bump the precedence of
_other_ third-party tools that happen to be in the same
directory as git. For example, consider this setup:
1. Git is installed by the system in /usr/bin. There are
other system utilities in /usr/bin. E.g., a system
"vi".
2. The user installs tools they prefer in /usr/local/bin.
E.g., vim with a "vi" symlink. They set their PATH to
/usr/local/bin:/usr/bin to prefer their custom tools.
3. Running /usr/bin/git puts "/usr/bin" at the front of
their PATH. When git invokes the editor on behalf of
the user, they get the system vi, not their normal vim.
There are other variants of this, including overriding
system ruby and python (which is quite common using tools
like "rvm" and "virtualenv", which use relocatable
hierarchies and $PATH settings to get a consistent
environment).
Given that the main motivation for git placing the argv[0]
dirname into the PATH has been broken for years, that the
remaining cases are obscure and unlikely (and easily fixed
by the user just setting up their $PATH sanely), and that
the behavior is hurting real, reasonably common use cases,
it's not worth continuing to do so.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have staged contents in your index and run "stash
apply", we may hit a conflict and put new entries into the
index. Recovering to your original state is difficult at
that point, because tools like "git reset --keep" will blow
away anything staged. We can make this safer by refusing to
apply when there are staged changes.
It's possible we could provide better tooling here, as "git
stash apply" should be writing only conflicts to the index
(so we know that any stage-0 entries are potentially
precious). But it is the odd duck; most "mergy" commands
will update the index for cleanly merged entries, and it is
not worth updating our tooling to support this use case
which is unlikely to be of interest (besides which, we would
still need to block a dirty index for "stash apply --index",
since that case _would_ be ambiguous).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests in t3903 wants to make sure that applying a
stash that touches only "file" can still happen even if there
are working tree changes to "other-file". To do so, it adds
"other-file" to the index (since otherwise it is an
untracked file, voiding the purpose of the test).
But as we are about to refactor the dirty-index handling,
and as this test does not actually care about having a dirty
index (only a dirty working tree), let's bump the tracking
of "other-file" into the setup phase, so we can have _just_
a dirty working tree here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When testing the diff output of "git stash list", we look
for the stash's subject of "WIP on master: $sha1", even
though it's not relevant to the diff output. This makes the
test brittle to refactoring, as any changes to earlier tests
may impact the commit sha1.
Since we don't care about the commit subject here, we can
simply ask stash not to print it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add failing scenario when branch detection (--detect-branches) is
enabled together with use client spec (--use-client-spec). In this
specific scenario git-p4 will break when the Perforce client view
removes part of the depot path, as in the following example:
//depot/branch1/base/... //client/branch1/...
The test case also includes an extra sub-file mapping to enforce
robustness check of git-p4's client view support:
//depot/branch1/base/dir/sub_file1 //client/branch1/sub_file1
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"diff-highlight" (in contrib/) used to show byte-by-byte
differences, which meant that multi-byte characters can be chopped
in the middle. It learned to pay attention to character boundaries
(assuming the UTF-8 payload).
* jk/colors:
diff-highlight: do not split multibyte characters
Test fixes.
* jk/test-annoyances:
t5551: make EXPENSIVE test cheaper
t5541: move run_with_cmdline_limit to test-lib.sh
t: pass GIT_TRACE through Apache
t: redirect stderr GIT_TRACE to descriptor 4
t: translate SIGINT to an exit
An earlier update to the parser that disects an address broke an
address, followed by a colon, followed by an empty string (instead
of the port number).
* tb/connect-ipv6-parse-fix:
connect.c: ignore extra colon after hostname
Test fixes for git-p4.
* va/fix-git-p4-tests:
t9814: guarantee only one source exists in git-p4 copy tests
git-p4: fix copy detection test
t9814: fix broken shell syntax in git-p4 rename test
The "git push --signed" protocol extension did not limit what the
"nonce" that is a server-chosen string can contain or how long it
can be, which was unnecessarily lax. Limit both the length and the
alphabet to a reasonably small space that can still have enough
entropy.
* jc/push-cert:
push --signed: tighten what the receiving end can ask to sign
The completion script (in contrib/) contaminated global namespace
and clobbered on a shell variable $x.
* ma/bash-completion-leaking-x:
completion: fix global bash variable leak on __gitcompappend
A broken or badly formatted commit might not record author or
committer lines or we may not find a valid name on them. The
function record_person() returned after calling get_commit_buffer()
without calling unuse_commit_buffer() on the memory it obtained in
such cases, potentially leaking it.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 33d4221 (write_sha1_file: freshen existing objects,
2014-10-15), we update the mtime of existing objects that we
would have written out (had they not existed). For the
common case in which many objects are packed, we may update
the mtime on a single packfile repeatedly. This can result
in a noticeable performance problem if calling utime() is
expensive (e.g., because your storage is on NFS).
We can fix this by keeping a per-pack flag that lets us
freshen only once per program invocation.
An alternative would be to keep the packed_git.mtime flag up
to date as we freshen, and freshen only once every N
seconds. In practice, it's not worth the complexity. We are
racing against prune expiration times here, which inherently
must be set to accomodate reasonable program running times
(because they really care about the time between an object
being written and it becoming referenced, and the latter is
typically the last step a program takes).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing out an object file, we first check whether it
already exists and if so optimize out the write. Prior to
33d4221, we did this by calling has_sha1_file(), which will
check for packed objects followed by loose. Since that
commit, we check loose objects first.
For the common case of a repository whose objects are mostly
packed, this means we will make a lot of extra access()
system calls checking for loose objects. We should follow
the same packed-then-loose order that all of our other
lookups use.
Reported-by: Stefan Saasen <ssaasen@atlassian.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pruning and repacking a repository that has an
alternate object store configured, we may traverse a large
number of objects in the alternate. This serves no purpose,
and may be expensive to do. A longer explanation is below.
Commits d3038d2 and abcb865 taught prune and pack-objects
(respectively) to treat "recent" objects as tips for
reachability, so that we keep whole chunks of history. They
built on the object traversal in 660c889 (sha1_file: add
for_each iterators for loose and packed objects,
2014-10-15), which covers both local and alternate objects.
In both cases, covering alternate objects is unnecessary, as
both commands can only drop objects from the local
repository. In the case of prune, we traverse only the local
object directory. And in the case of repacking, while we may
or may not include local objects in our pack, we will never
reach into the alternate with "repack -d". The "-l" option
is only a question of whether we are migrating objects from
the alternate into our repository, or leaving them
untouched.
It is possible that we may drop an object that is depended
upon by another object in the alternate. For example,
imagine two repositories, A and B, with A pointing to B as
an alternate. Now imagine a commit that is in B which
references a tree that is only in A. Traversing from recent
objects in B might prevent A from dropping that tree. But
this case isn't worth covering. Repo B should take
responsibility for its own objects. It would never have had
the commit in the first place if it did not also have the
tree, and assuming it is using the same "keep recent chunks
of history" scheme, then it would itself keep the tree, as
well.
So checking the alternate objects is not worth doing, and
come with a significant performance impact. In both cases,
we skip any recent objects that have already been marked
SEEN (i.e., that we know are already reachable for prune, or
included in the pack for a repack). So there is a slight
waste of time in opening the alternate packs at all, only to
notice that we have already considered each object. But much
worse, the alternate repository may have a large number of
objects that are not reachable from the local repository at
all, and we end up adding them to the traversal.
We can fix this by considering only local unseen objects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simply running "p4 changes" on a large branch can result in a "too
many rows scanned" error from the Perforce server. It is better to
use a sequence of smaller calls to "p4 changes", using the "-m"
option to limit the size of each call.
Signed-off-by: Lex Spoon <lex@lexspoon.org>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old message did not mention the :regex:file form.
To avoid overly long lines, split the message into two lines (in case
item->string is long, it will be the only part truncated in a narrow
terminal).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old wording was somehow implying that <start> and <end> were not
regular expressions. Also, the common case is to use a plain function
name here so <funcname> makes sense (the fact that it is a regular
expression is documented in line-range-format.txt).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-gui 0.20.0
* tag 'gitgui-0.20.0' of http://repo.or.cz/r/git-gui:
git-gui: set version 0.20
git-gui: sv.po: Update Swedish translation (547t0f0u)
git-gui i18n: Updated Bulgarian translation (547t,0f,0u)
git-gui: Makes chooser set 'gitdir' to the resolved path
git-gui: Fixes chooser not accepting gitfiles
git-gui: reinstate support for Tcl 8.4
git-gui: fix problem with gui.maxfilesdisplayed
git-gui: fix verbose loading when git path contains spaces.
git-gui/gitk: Do not depend on Cygwin's "kill" command on Windows
git-gui: add configurable tab size to the diff view
git-gui: Make git-gui lib dir configurable at runime
git-gui i18n: Updated Bulgarian translation (520t,0f,0u)
L10n: vi.po (543t): Init translation for Vietnamese
git-gui: align the new recursive checkbox with the radiobuttons.
git-gui: Add a 'recursive' checkbox in the clone menu.
Tested on Gentoo and OpenSUSE 13.1, both x86-64
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once we know the number of objects in the input pack, we allocate an
array of nr_objects of struct delta_entry. On x86-64, this struct is
32 bytes long. The union delta_base, which is part of struct
delta_entry, provides enough space to store either ofs-delta (8 bytes)
or ref-delta (20 bytes).
Because ofs-delta encoding is more efficient space-wise and more
performant at runtime than ref-delta encoding, Git packers try to use
ofs-delta whenever possible, and it is expected that objects encoded
as ref-delta are minority.
In the best clone case where no ref-delta object is present, we waste
(20-8) * nr_objects bytes because of this union. That's about 38MB out
of 100MB for deltas[] with 3.4M objects, or 38%. deltas[] would be
around 62MB without the waste.
This patch attempts to eliminate that. deltas[] array is split into
two: one for ofs-delta and one for ref-delta. Many functions are also
duplicated because of this split. With this patch, ofs_deltas[] array
takes 51MB. ref_deltas[] should remain unallocated in clone case (0
bytes). This array grows as we see ref-delta. We save about half in
this case, or 25% of total bookkeeping.
The saving is more than the calculation above because some padding in
the old delta_entry struct is removed. ofs_delta_entry is 16 bytes,
including the 4 bytes padding. That's 13MB for padding, but packing
the struct could break platforms that do not support unaligned
access. If someone on 32-bit is really low on memory and only deals
with packs smaller than 2G, using 32-bit off_t would eliminate the
padding and save 27MB on top.
A note about ofs_deltas allocation. We could use ref_deltas memory
allocation strategy for ofs_deltas. But that probably just adds more
overhead on top. ofs-deltas are generally the majority (1/2 to 2/3) in
any pack. Incremental realloc may lead to too many memcpy. And if we
preallocate, say 1/2 or 2/3 of nr_objects initially, the growth rate
of ALLOC_GROW() could make this array larger than nr_objects, wasting
more memory.
Brought-up-by: Matthew Sporleder <msporleder@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0027 expects the native end-of-lines to be a single line feed
character. On Windows, however, we set it to a carriage return
character followed by a line feed character. Thus, we have to
modify t0027 to expect different warnings depending on the
end-of-line markers.
Adjust the check of the warnings and use these macros:
WILC: Warn if LF becomes CRLF
WICL: Warn if CRLF becomes LF
WAMIX: Mixed line endings: either CRLF->LF or LF->CRLF
Improve the information given by check_warning().
Use test_cmp to show which warning is missing (or shouldn't be
there).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make more clear what the tests are doing:
commit_check_warn():
Commit files and checks for conversion warnings.
Old name: create_file_in_repo()
checkout_files():
Checkout files from the repo and check if they have
the appropriate line endings in the work space.
Old name: check_files_in_ws()
Replace non-leading TABS with spaces
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are limiting a rev-list traversal due to
UNINTERESTING refs, we have to walk down the tips (both
interesting and uninteresting) to find where they intersect.
We keep a queue of commits to examine, pop commits off
the queue one by one, and potentially add their parents. The
size of the queue will naturally fluctuate based on the
"width" of the history graph; i.e., the number of
simultaneous lines of development. But for the most part it
will stay in the same ballpark as the initial number of tips
we fed, shrinking over time (as we hit common ancestors of
the tips). So roughly speaking, if we start with `N` tips,
we'll spend much of the time with a queue around `N` items.
For each UNINTERESTING commit we pop, we call
still_interesting to check whether marking its parents as
UNINTERESTING has made the whole queue uninteresting (in
which case we can quit early). Because the queue is stored
as a linked list, this is `O(N)`, where `N` is the number of
items in the queue. So processing a queue with `N` commits
marked UNINTERESTING (and one or more interesting commits)
will take `O(N^2)`.
If you feed a lot of positive tips, this isn't a problem.
They aren't UNINTERESTING, so they don't incur the
still_interesting check. It also isn't a problem if you
traverse from an interesting tip to some UNINTERESTING
bases. We order the queue by recency, so the interesting
commits stay at the front of the queue as we walk down them.
The linear check can exit early as soon as it sees one
interesting commit left in the queue.
But if you want to know whether an older commit is reachable
from a set of newer tips, we end up processing in the
opposite direction: from the UNINTERESTING ones down to the
interesting one. This may happen when we call:
git rev-list $commits --not --all
in check_everything_connected after a fetch. If we fetched
something much older than most of our refs, and if we have a
large number of refs, the traversal cost is dominated by the
quadratic behavior.
These commands simulate the connectivity check of such a
fetch, when you have `$n` distinct refs in the receiver:
# positive ref is 100,000 commits deep
git rev-list --all | head -100000 | tail -1 >input
# huge number of more recent negative refs
git rev-list --all | head -$n | sed s/^/^/ >>input
time git rev-list --stdin <input
Here are timings for various `n` on the linux.git
repository. The `n=1` case provides a baseline for just
walking the commits, which lets us see the still_interesting
overhead. The times marked with `+` subtract that baseline
to show just the extra time growth due to the large number
of refs. The `x` numbers show the slowdown of the adjusted
time versus the prior trial.
n | before | after
--------------------------------------------------------
1 | 0.991s | 0.848s
10000 | 1.120s (+0.129s) | 0.885s (+0.037s)
20000 | 1.451s (+0.460s, 3.5x) | 0.923s (+0.075s, 2.0x)
40000 | 2.731s (+1.740s, 3.8x) | 0.994s (+0.146s, 1.9x)
80000 | 8.235s (+7.244s, 4.2x) | 1.123s (+0.275s, 1.9x)
Each trial doubles `n`, so you can see the quadratic (`4x`)
behavior before this patch. Afterwards, we have a roughly
linear relationship.
The implementation is fairly straightforward. Whenever we do
the linear search, we cache the interesting commit we find,
and next time check it before doing another linear search.
If that commit is removed from the list or becomes
UNINTERESTING itself, then we fall back to the linear
search. This is very similar to the trick used by fce87ae
(Fix quadratic performance in rewrite_one., 2008-07-12).
I considered and rejected several possible alternatives:
1. Keep a count of UNINTERESTING commits in the queue.
This requires managing the count not only when removing
an item from the queue, but also when marking an item
as UNINTERESTING. That requires touching the other
functions which mark commits, and would require knowing
quickly which commits are in the queue (lookup in the
queue is linear, so we would need an auxiliary
structure or to also maintain an IN_QUEUE flag in each
commit object).
2. Keep a separate list of interesting commits. Drop items
from it when they are dropped from the queue, or if
they become UNINTERESTING. This again suffers from
extra complexity to maintain the list, not to mention
CPU and memory.
3. Use a better data structure for the queue. This is
something that could help the fix in fce87ae, because
we order the queue by recency, and it is about
inserting quickly in recency order. So a normal
priority queue would help there. But here, we cannot
disturb the order of the queue, which makes things
harder. We really do need an auxiliary index to track
the flag we care about, which is basically option (2)
above.
The "cache" trick is simple, and the numbers above show that
it works well in practice. This is because the length of
time it takes to find an interesting commit is proportional
to the length of time it will remain cached (i.e., if we
have to walk a long way to find it, it also means we have to
pop a lot of elements in the queue until we get rid of it
and have to find another interesting commit).
The worst case is still quadratic, though. We could have `N`
uninteresting commits at the front of the queue, followed by
`N` interesting commits, where commit `i` has parent `i+N`.
When we pop commit `i`, we will notice that the parent of
the next commit, `i+1+N` is still interesting and cache it.
But then handling commit `i+1`, we will mark its parent
`i+1+N` uninteresting, and immediately invalidate our cache.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commit fe8e3b7 refactored type_from_string to allow
input that was not NUL-terminated, it switched to using
strncmp instead of strcmp. But this means we check only the
first "len" bytes of the strings, and ignore any remaining
bytes in the object_type_string. We should make sure that it
is also "len" bytes, or else we would accept "comm" as
"commit", and so forth.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name (not user) and email setting should be in config section
"user" and not in "core" as documented in Documentation/config.txt.
Signed-off-by: Ossi Herrala <oherrala@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old description is rather clearly a wrong cut-and-paste from
t2016-checkout-patch.sh.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test passes if one replaces the 'e' command with a 'y' command in
the 'add -p' session.
Reported-by: Tanky Woo <wtq1990@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The second argument to test_path_is_file and test_path_is_dir
must be $2 and not $*, which instead would repeat the file
name in the error message.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because the function reads one character at the time, unfortunately
we cannot use the easier skip_utf8_bom() helper, but at least we do
not have to duplicate the constant string this way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the recent change to ignore the UTF8 BOM at the beginning of
.gitignore files, we now have two codepaths that do such a skipping
(the other one is for reading the configuration files).
Introduce utf8_bom[] constant string and skip_utf8_bom() helper
and teach .gitignore code how to use it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the previous step shifts where the "entry" begins, we
still iterate over the original buf[], which may begin with the
UTF-8 BOM we are supposed to be skipping. At the end of the first
line, the code grabs the contents of it starting at "entry", so
there is nothing wrong per-se, but the logic looks really confused.
Instead, move the buf pointer and shrink its size, to truly
pretend that UTF-8 BOM did not exist in the input.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some text editors like Notepad or LibreOffice write an UTF-8 BOM in
order to indicate that the file is Unicode text rather than whatever the
current locale would indicate.
If someone uses such an editor to edit a gitignore file, we are left
with those three bytes at the beginning of the file. If we do not skip
them, we will attempt to match a filename with the BOM as prefix, which
won't match the files the user is expecting.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t1430, we check whether deleting the branch "../../foo"
will delete ".git/foo". However, this is not that
interesting a test; the precious file ".git/foo" does not
look like a ref, so even if we did not notice the "escape"
from the "refs/" hierarchy, we would fail for that reason
(i.e., if you turned refname_is_safe into a noop, the test
still passes).
Let's add an additional test for the same thing, but with a
file that actually looks like a ref. That will make sure we
are exercising the refname_is_safe code. While we're at it,
let's also make the code work a little harder by adding some
extra paths and some empty path components.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to d0f810f (refs.c: allow listing and deleting badly
named refs, 2014-09-03), read_packed_refs would barf on any
malformed refnames by virtue of calling create_ref_entry
with the "check" parameter set to 1. That commit loosened
our reading so that we call check_refname_format ourselves
and just set a REF_BAD_NAME flag.
We then call create_ref_entry with the check parameter set
to 0. That function learned to do an extra safety check even
when the check parameter is 0, so that we don't load any
dangerous refnames (like "../../../etc/passwd"). This is
implemented by calling refname_is_safe() in
create_ref_entry().
However, we can observe that refname_is_safe() can only be
true if check_refname_format() also failed. So in the common
case of a sanely named ref, we perform _both_ checks, even
though we know that the latter will never trigger. This has
a noticeable performance impact when the packed-refs file is
large.
Let's drop the refname_is_safe check from create_ref_entry(),
and make it the responsibility of the caller. Of the three
callers that pass a check parameter of "0", two will have
just called check_refname_format(), and can check the
refname-safety only when it fails. The third case,
pack_if_possible_fn, is copying from an existing ref entry,
which must have previously passed our safety check.
With this patch, running "git rev-parse refs/heads/does-not-exist"
on a repo with a large (1.6GB) packed-refs file went from:
real 0m6.768s
user 0m6.340s
sys 0m0.432s
to:
real 0m5.703s
user 0m5.276s
sys 0m0.432s
for a wall-clock speedup of 15%.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We spend a lot of time in strbuf_getwholeline in a tight
loop reading characters from a stdio handle into a buffer.
The libc getdelim() function can do this for us with less
overhead. It's in POSIX.1-2008, and was a GNU extension
before that. Therefore we can't rely on it, but can fall
back to the existing getc loop when it is not available.
The HAVE_GETDELIM knob is turned on automatically for Linux,
where we have glibc. We don't need to set any new
feature-test macros, because we already define _GNU_SOURCE.
Other systems that implement getdelim may need to other
macros (probably _POSIX_C_SOURCE >= 200809L), but we can
address that along with setting the Makefile knob after
testing the feature on those systems.
Running "git rev-parse refs/heads/does-not-exist" on a repo
with an extremely large (1.6GB) packed-refs file went from
(best-of-5):
real 0m8.601s
user 0m8.084s
sys 0m0.524s
to:
real 0m6.768s
user 0m6.340s
sys 0m0.432s
for a wall-clock speedup of 21%.
Based on a patch from Rasmus Villemoes <rv@rasmusvillemoes.dk>.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with the recent speedup to strbuf_addch, we can avoid
calling strbuf_grow() in a tight loop of single-character
adds by instead checking strbuf_avail.
Note that we would instead call strbuf_addch directly here,
but it does more work than necessary: it will NUL-terminate
the result for each character read. Instead, in this loop we
read the characters one by one and then add the terminator
manually at the end.
Running "git rev-parse refs/heads/does-not-exist" on a repo
with an extremely large (1.6GB) packed-refs file went from
(best-of-5):
real 0m10.948s
user 0m10.548s
sys 0m0.412s
to:
real 0m8.601s
user 0m8.084s
sys 0m0.524s
for a wall-clock speedup of 21%.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We mark strbuf_addch as inline, because we expect it may be
called from a tight loop. However, the first thing it does
is call the non-inline strbuf_grow(), which can handle
arbitrary-sized growth. Since we know that we only need a
single character, we can use the inline strbuf_avail() to
quickly check whether we need to grow at all.
Our check is redundant when we do call strbuf_grow(), but
that's OK. The common case is that we avoid calling it at
all, and we have made that case faster.
On a silly pathological case:
perl -le '
print "[core]";
print "key$_ = value$_" for (1..1000000)
' >input
git config -f input core.key1
this dropped the time to run git-config from:
real 0m0.159s
user 0m0.152s
sys 0m0.004s
to:
real 0m0.140s
user 0m0.136s
sys 0m0.004s
for a savings of 12%.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We read config files character-by-character from a stdio
handle using fgetc(). This incurs significant locking
overhead, even though we know that only one thread can
possibly access the handle. We can speed this up by taking
the lock ourselves, and then using getc_unlocked to read
each character.
On a silly pathological case:
perl -le '
print "[core]";
print "key$_ = value$_" for (1..1000000)
' >input
git config -f input core.key1
this dropped the time to run git-config from:
real 0m0.263s
user 0m0.260s
sys 0m0.000s
to:
real 0m0.159s
user 0m0.152s
sys 0m0.004s
for a savings of 39%. Most config files are not this big,
but the savings should be proportional to the size of the
file (i.e., we always save 39%, just of a much smaller
number).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf_getwholeline calls getc in a tight loop. On modern
libc implementations, the stdio code locks the handle for
every operation, which means we are paying a significant
overhead. We can get around this by locking the handle for
the whole loop and using the unlocked variant.
Running "git rev-parse refs/heads/does-not-exist" on a repo
with an extremely large (1.6GB) packed-refs file went from:
real 0m18.900s
user 0m18.472s
sys 0m0.448s
to:
real 0m10.953s
user 0m10.384s
sys 0m0.580s
for a wall-clock speedup of 42%. All times are best-of-3,
and done on a glibc 2.19 system.
Note that we call into strbuf_grow while holding the lock.
It's possible for that function to call other stdio
functions (e.g., printing to stderr when dying due to malloc
error); however, the POSIX.1-2001 definition of flockfile
makes it clear that the locks are per-handle, so we are fine
unless somebody else tries to read from our same handle.
This doesn't ever happen in the current code, and is
unlikely to be added in the future (we would have to do
something exotic like add a die_routine that tried to read
from stdin).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX.1-2001 specifies some functions for optimizing the
locking out of tight getc() loops. Not all systems are
POSIX, though, and even not all POSIX systems are required
to implement these functions. We can check for the
feature-test macro to see if they are available, and if not,
provide a noop implementation.
There's no Makefile knob here, because we should just detect
this automatically. If there are very bizarre systems, we
may need to add one, but it's not clear yet in which
direction:
1. If a system defines _POSIX_THREAD_SAFE_FUNCTIONS but
these functions are missing or broken, we would want a
knob to manually turn them off.
2. If a system has these functions but does not define
_POSIX_THREAD_SAFE_FUNCTIONS, we would want a knob to
manually turn them on.
We can add such a knob when we find a real-world system that
matches this.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf_getwholeline calls fgetc in a tight loop. Using the
getc form, which can be implemented as a macro, should be
faster (and we do not care about it evaluating our argument
twice, as we just have a plain variable).
On my glibc system, running "git rev-parse
refs/heads/does-not-exist" on a file with an extremely large
(1.6GB) packed-refs file went from (best of 3 runs):
real 0m19.383s
user 0m18.876s
sys 0m0.528s
to:
real 0m18.900s
user 0m18.472s
sys 0m0.448s
for a wall-clock speedup of 2.5%.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 2bf15a3330, whose
intention was good, but the verbosity levels used in merge-recursive
turns out to be rather uneven. For example, a merge of two branches
with conflicting submodule updates used to report CONFLICT: output
with --quiet but no longer (which *is* desired), while the final
"Automatic merge failed; fix conflicts and then commit" message is
still shown even with --quiet (which *is* inconsistent).
Originally reported by Bryan Turner; it is too early to declare what
the concensus is, but it seems that we would need to level the
verbosity levels used in merge strategy backends before we can go
forward. In the meantime, we'd revert to the old behaviour until
that happens.
cf. $gmane/267245
Windows does not have process groups. It is, therefore, the simplest
to pretend that each process is in its own process group.
While here, move the getppid() stub from its old location (between
two sync related functions) next to the two new functions.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Disable the display of the progress if stderr is not the
current foreground process.
Still display the final result when done.
Signed-off-by: Luke Mewburn <luke@mewburn.net>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function parses the input to compute the broken-down time in
"struct tm", and the GMT timezone offset. If the timezone offset
does not exist in the input, the broken-down time is turned into the
number of seconds since epoch both in the current timezone and in
GMT and the offset is computed as their difference.
However, we forgot to make sure tm.tm_isdst is set to -1 (i.e. let
the system figure out if DST is in effect in the current timezone
when turning the broken-down time to the number of seconds since
epoch); it is done so at the beginning of the function, but a call
to match_digit() in the function can lead to a call to gmtime_r() to
clobber the field.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Diagnosed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the input does not have GMT timezone offset, the code computes
it by computing the local and GMT time for the given timestamp. But
there is no point doing so if the given timestamp is known to be a
bogus one.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"diff-highlight" (in contrib/) used to show byte-by-byte
differences, which meant that multi-byte characters can be chopped
in the middle. It learned to pay attention to character boundaries
(assuming the UTF-8 payload).
* jk/colors:
diff-highlight: do not split multibyte characters
"git merge --quiet" did not squelch messages from the underlying
merge-recursive strategy.
* jk/merge-quiet:
merge: pass verbosity flag down to merge-recursive
A push into an unborn branch, with "receive.denyCurrentBranch" set
to "updateInstead", did not check out the working tree as expected.
* jc/update-instead-into-void:
push-to-deploy: allow pushing into an unborn branch and updating it
The "help-all" option is being initialized with a wrong value.
While being semantically wrong this can also cause a segmentation
fault in gcc on ARMv7 hardfloat platforms with a hardened
toolchain. Fix this by initializing with a NULL value.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By using a tree with multiple identical files and allowing copy detection to
choose any one of them, the check in the test is unnecessarily complex. We can
simplify by:
* Modify source file (file2) before copying the file.
* Check that only file2 is the source in the output of "p4 filelog".
* Remove all "case" statements and replace them with simple tests to check
that source is "file2".
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ignore an extra ':' at the end of the hostname in URL's like
"ssh://example.com:/path/to/repo"
The colon is meant to separate a port number from the hostname.
If the port is empty, the colon should be ignored, see RFC 3986.
It had been working for URLs with ssh:// scheme, but was unintentionally
broken in 86ceb3, "allow ssh://user@[2001:db8::1]/repo.git"
Reported-by: Reid Woodbury Jr. <reidw@rawsound.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate one message came from git.pot update in 6eebb35
(l10n: git.pot: v2.4.0 round 2 (1 update)).
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
When the input is UTF-8 and Perl is operating on bytes instead of
characters, a diff that changes one multibyte character to another
that shares an initial byte sequence will result in a broken diff
display as the common byte sequence prefix will be separated from
the rest of the bytes in the multibyte character.
For example, if a single line contains only the unicode character
U+C9C4 (encoded as UTF-8 0xEC, 0xA7, 0x84) and that line is then
changed to the unicode character U+C9C0 (encoded as UTF-8 0xEC,
0xA7, 0x80), when operating on bytes diff-highlight will show only
the single byte change from 0x84 to 0x80 thus creating invalid UTF-8
and a broken diff display.
Fix this by putting Perl into character mode when splitting the line
and then back into byte mode after the split is finished.
The utf8::xxx functions require Perl 5.8 so we require that as well.
Also, since we are mucking with code in the split_line function, we
change a '*' quantifier to a '+' quantifier when matching the $COLOR
expression which has the side effect of speeding everything up while
eliminating useless '' elements in the returned array.
Reported-by: Yi EungJun <semtlenori@gmail.com>
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a Perforce server is configured to automatically set +l
(exclusive lock) on add of certain file types, git p4 submit will
fail during getP4OpenedType, as the regex doesn't expect the
trailing '*exclusive*' from p4 opened:
//depot/file.png#1 - add default change (binary+l) *exclusive*
Signed-off-by: Blair Holloway <blair_holloway@playstation.sony.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test for handling of failure when trying to move a file
that is locked by another client was not quite correct - it
failed early on because the target file in the move already
existed.
The test now fails because git-p4 does not properly detect
that p4 has rejected the move, and instead just crashes. At
present, git-p4 has no support for detecting that a file
has been locked and reporting it to the user, so this is
the expected outcome.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test script t9816-git-p4-locked.sh test #4 tests for
adding a file that is locked by Perforce automatically.
This is currently not supported by git-p4 and so is
expected to fail.
However, a small typo meant it always failed, even with
a fixed git-p4. Fix the typo to resolve this.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When detached and checking out a branch again, git checkout warns
about commit(s) that might get lost. It says "If you want to keep
them ..." even for only one commit.
Use Q_() to allow differentiating singular vs plural.
Signed-off-by: Thomas Schneider <thosch97@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes "git merge --quiet" really quiet when we call
into merge-recursive.
Note that we can't just pass our flag down as-is; the two
parts of the code use different scales. We center at "0" as
normal for git-merge (with "--quiet" giving a negative
value), but merge-recursive uses "2" as its center. This
patch passes a negative value to merge-recursive rather than
"1", though, as otherwise the user would have to use "-qqq"
to squelch all messages (but the downside is that the user
cannot distinguish between levels 0-2 if without resorting
to the GIT_MERGE_VERBOSITY variable).
We may want to review and renormalize the message severities
in merge-recursive, but that does not have to happen now.
This is at least in improvement in the sense that we are
respecting "--quiet" at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you create a git repository in the root directory with
"git init /", we erroneously write a core.worktree entry.
This isn't _wrong_, in the sense that it's OK to set
core.worktree when we don't need to. But it is unnecessarily
surprising if you later move the .git directory to another
path (which usually moves the relative working tree, but is
foiled if there is an explicit worktree set).
The problem is that we check whether core.worktree is
necessary by seeing if we can make the git_dir by
concatenating "/.git" onto the working tree. That would lead
to "//.git" in this instance, but we actually have "/.git"
(without the doubled slash).
We can fix this by special-casing the root directory. I also
split the logic out into its own function to make the
conditional a bit more readable (and used skip_prefix, which
I think makes it a little more obvious what is going on).
No tests, as we would need to be able to write to "/" to do
so. I did manually confirm that:
sudo git init /
cd /
git rev-parse --show-toplevel
git config core.worktree
still finds the top-level correctly (as "/"), and does not
set any core.worktree variable.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of blindly trusting the receiving side to give us a sensible
nonce to sign, limit the length (max 256 bytes) and the alphabet
(alnum and a few selected punctuations, enough to encode in base64)
that can be used in nonce.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --signed is not supported, the error message names the remote
"receiving end". If --atomic is not supported, the error message
names the remote "server". Unify the naming to "receiving end"
as we're in the context of "push".
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The use of 'symbolische Verknüpfung' for 'symbolic link' is more common
than 'symbolischer Verweis'.
Signed-off-by: Matthias Rüster <matthias.ruester@gmail.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
The three dots in messages where the hash is abbreviated
were misinterpreted and are fixed with this commit.
Noticed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Long ago, I documented a corruption recovery I did and gave
some C code that I used to help find a flipped bit. I had
to fix a similar case recently, and I ended up writing a few
more tools. I hope nobody ever has to use these, but it
does not hurt to share them, just in case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Setting receive.denycurrentbranch to updateinstead and pushing into
the current branch, when the working tree and the index is truly
clean, is supposed to reset the working tree and the index to match
the tree of the pushed commit. This did not work when pushing into
an unborn branch.
The code that drives push-to-checkout hook needs no change, as the
interface is defined so that hook can decide what to do when the
push is coming to an unborn branch and take an appropriate action
since the beginning.
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merges with an absurd number of parents are still a bad idea because
they do not render well in tools like gitk, but if they are present
in the repository being imported into git then there's no need to
avoid reproducing them faithfully.
In olden times, before v1.6.0-rc0~194 (2008-06-27), git commit-tree
and higher-level tools built on top of it were limited to writing 16
parents for a commit. Nowadays normal git operations are happy to
write more parents when asked, so the motivation for this note in the
fast-import documentation is gone and we can remove it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When stream_blob_to_fd() opens an input stream with a filter, the
filter gets discarded upon calling close_istream() before the
function returns in the normal case. However, when we fail to open
the stream, we failed to discard the filter.
By discarding the filter in the failure case, give a consistent
life-time rule of the filter to the callers; otherwise the callers
need to conditionally discard the filter themselves, and this
function does not give enough hint for the caller to do so
correctly.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git show-branch --topics <rev> <revs>..." displays ancestry graph, only
considering commits that are in all given revs, except the first one.
"git show-branch" displays ancestry graph for all local branches.
Unfortunately, "git show-branch --topics <rev>" only prints out the rev
info for the given rev, and nothing else, e.g.:
$ git show-branch --topics origin/master
[origin/master] Sync with 2.3.3
While there is an option to add all remote-tracking branches (-r), and
another to add all local+remote branches (-a), there is no option to add
only local branches. Adding such an option could be considered, but a
user would likely already expect that the above command line considers
the lack of rev other than for --topics as meaning all local branches,
like when there is no argument at all.
Moreover, when using -r and -a along with --topics, the first local or
remote-tracking branch, depending on alphabetic order is used instead of
the one given after --topics (any rev given on the command line is
actually simply ignored when either -r or -a is given). And if no rev is
given at all, the fact that the first alphetical branch is the base of
topics is probably not expected by users (Maybe --topics should always
require one rev on the command line?)
This change makes
"show-branch --topics $rev"
act as
"show-branch --topics $rev $(git for-each-ref refs/heads
--format='%(refname:short)')"
"show-branch -r --topics $rev ..."
act as
"show-branch --topics $rev ... $(git for-each-ref refs/remotes
--format='%(refname:short)')"
instead of
"show-branch --topics $(git for-each-ref refs/remotes
--format='%(refname:short)')"
and
"show-branch -a --topics $rev ..."
act as
"show-branch --topics $rev ... $(git for-each-ref refs/heads refs/remotes
--format='%(refname:short)')"
instead of
"show-branch --topics $(git for-each-ref refs/heads refs/remotes
--format='%(refname:short)')"
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git prune --worktrees` was pruning worktrees which were non-existent OR
expired, while it rather should prune those which are orphaned AND
expired, as git-checkout documentation describes. Fix it.
Add test 'not prune proper checkouts', which uses valid but expired
worktree.
Modify test 'not prune recent checkouts' to remove the worktree before
pruning - link in worktrees still must survive. In older form it is
useless because would pass always when the other test passes.
Signed-off-by: Max Kirillov <max@max630.net>
Acked-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In b3256eb (standardize and improve lookup rules for external local
repos), enter_repo() was modified to use a different precedence
ordering of suffixes for DWIM of the repository path, and to ensure
that the repository path is actually valid instead of just testing
for existence.
However, the documentation was not modified to reflect these
changes. Fix the documentation to match the code.
Documentation contributed by Jeff King.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
wt_shortstatus_print_tracking() calls shorten_unambiguous_ref(),
which returns a newly allocated memory the caller takes ownership
of; it is necessary to free `base` when the function is done with
it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `filepair` is assigned new memory with any iteration via
process_diff_filepair, so free it before the current iteration ends.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b27cfb0 (git-cherry-pick: Add keep-redundant-commits
option, 2012-04-20), added the --keep-redundant-commits
option, and switched the default behavior (without that
option) to silently ignore empty commits. Later, the second
half of that commit was reverted in ac2b0e8 (cherry-pick:
regression fix for empty commits, 2012-05-29), but the
documentation added for --keep-redundant-commits was never
updated to match. Let's do so now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we find an object in a packfile index, we make sure we
can still open the packfile itself (or that it is already
open), as it might have been deleted by a simultaneous
repack. If we can't access the packfile, we print a warning
for the user and tell the caller that we don't have the
object (we can then look in other packfiles, or find a loose
version, before giving up).
The warning we print to the user isn't really accomplishing
anything, and it is potentially confusing to users. In the
normal case, it is complete noise; we find the object
elsewhere, and the user does not have to care that we racily
saw a packfile index that became stale. It didn't affect the
operation at all.
A possibly more interesting case is when we later can't find
the object, and report failure to the user. In this case the
warning could be considered a clue toward that ultimate
failure. But it's not really a useful clue in practice. We
wouldn't even print it consistently (since we are racing
with another process, we might not even see the .idx file,
or we might win the race and open the packfile, completing
the operation).
This patch drops the warning entirely (not only from the
fill_pack_entry site, but also from an identical use in
pack-objects). If we did find the warning interesting in the
error case, we could stuff it away and reveal it to the user
when we later die() due to the broken object. But that
complexity just isn't worth it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ignoring a merge can be read as ignoring the changes a merge commit
introduces altogether, as if the entire side branch the merge commit
merged was removed from the history. But that is not what happens
if "-p" is not specified. What happens is that the individual
commits a merge commit introduces are replayed in order, and only
any possible merge conflict resolutions or manual amendments to the
merge commit are ignored.
Get this straight in the docs.
Also, do not say that merge commits are *tried* to be recreated. As that is
true almost everywhere it is better left unsaid.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 20d1c652 (parse-options: remove unused OPT_SET_PTR, 2014-03-30)
removed OPT_SET_PTR, the comment in the header that describes what
the option did to defval field was left behind by mistake. Remove
it.
Signed-off-by: Ivan Ukhov <ivan.ukhov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prompt script (in contrib/) did not show the untracked sign
when working in a subdirectory without any untracked files.
* ct/prompt-untracked-fix:
git prompt: use toplevel to find untracked files
Even though "git grep --quiet" is run merely to ask for the exit
status, we spawned the pager regardless. Stop doing that.
* ws/grep-quiet-no-pager:
grep: fix "--quiet" overwriting current output
Recommend format-patch and send-email for those who want to submit
patches to this project.
* jc/submitting-patches-mention-send-email:
SubmittingPatches: encourage users to use format-patch and send-email
An failure early in the "git clone" that started creating the
working tree and repository could have resulted in some directories
and files left without getting cleaned up.
* jk/cleanup-failed-clone:
clone: drop period from end of die_errno message
clone: initialize atexit cleanup handler earlier
"git fetch" that fetches a commit using the allow-tip-sha1-in-want
extension could have failed to fetch all the requested refs.
* jk/fetch-pack:
fetch-pack: remove dead assignment to ref->new_sha1
fetch_refs_via_pack: free extra copy of refs
filter_ref: make a copy of extra "sought" entries
filter_ref: avoid overwriting ref->old_sha1 with garbage
The split-index mode introduced at v2.3.0-rc0~41 was broken in the
codepath to protect us against a broken reimplementation of Git
that writes an invalid index with duplicated index entries, etc.
* tg/fix-check-order-with-split-index:
read-cache: fix reading of split index
"git prune" used to largely ignore broken refs when deciding which
objects are still being used, which could spread an existing small
damage and make it a larger one.
* jk/prune-with-corrupt-refs:
refs.c: drop curate_packed_refs
repack: turn on "ref paranoia" when doing a destructive repack
prune: turn on ref_paranoia flag
refs: introduce a "ref paranoia" flag
t5312: test object deletion code paths in a corrupted repository
File file11 is copied from file2 and diff-tree correctly reports
this file as its the source. But it is possible that the diff-tree
algorithm detects file10, which was also copied from file2, as the
origin of the new file.
This fix uses a case statement to support both files as the source
of file11, as was done in other tests in this file.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An update to the tests in 2.1 era introduced a broken case statements
that lack closing esac.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/leaks:
http: release the memory of a http pack request as well
read-cache: fix memleak
add_to_index(): free unused cache-entry
commit.c: fix a memory leak
http-push: remove unneeded cleanup
merge-recursive: fix memleaks
merge-blobs.c: fix a memleak
builtin/apply.c: fix a memleak
update-index: fix a memleak
read-cache: free cache entry in add_to_index in case of early return
"git tag -h" used to show the "--column" and "--sort" options
that are about listing in a wrong section.
* jk/tag-h-column-is-a-listing-option:
tag: fix some mis-organized options in "-h" listing
The transfer.hiderefs support did not quite work for smart-http
transport.
* jk/smart-http-hide-refs:
upload-pack: do not check NULL return of lookup_unknown_object
upload-pack: fix transfer.hiderefs over smart-http
The code that reads from the ctags file in the completion script
(in contrib/) did not spell ${param/pattern/string} substitution
correctly, which happened to work with bash but not with zsh.
* js/completion-ctags-pattern-substitution-fix:
contrib/completion: escape the forward slash in __git_match_ctag
When a commit changes a path P that used to be a file to a directory
and creates a new path P/X in it, "git show" would say that file P
was removed and file P/X was created for such a commit.
However, if we compare two directories, D1 and D2, where D1 has a
file D1/P in it and D2 has a directory D2/P under which there is a
file D2/P/X, and ask "git diff --no-index D1 D2" to show their
differences, we simply get a refusal "file/directory conflict".
Surely, that may be what GNU diff does, but we can do better and it
is easy to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "also" sounds as if "preserve" does a rebase as an additional
step that "true" would not do, but that is not the case. Clarify
this by omitting "also", and rewording the sentence a bit.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People often forget to chain the commands in their test together
with &&, leaving a failure from an earlier command in the test go
unnoticed. The new GIT_TEST_CHAIN_LINT mechanism allows you to
catch such a mistake more easily.
* jk/test-chain-lint: (36 commits)
t9001: drop save_confirm helper
t0020: use test_* helpers instead of hand-rolled messages
t: simplify loop exit-code status variables
t: fix some trivial cases of ignored exit codes in loops
t7701: fix ignored exit code inside loop
t3305: fix ignored exit code inside loop
t0020: fix ignored exit code inside loops
perf-lib: fix ignored exit code inside loop
t6039: fix broken && chain
t9158, t9161: fix broken &&-chain in git-svn tests
t9104: fix test for following larger parents
t4104: drop hand-rolled error reporting
t0005: fix broken &&-chains
t7004: fix embedded single-quotes
t0050: appease --chain-lint
t9001: use test_when_finished
t4117: use modern test_* helpers
t6034: use modern test_* helpers
t1301: use modern test_* helpers
t0020: use modern test_* helpers
...
The help text for the --force-with-lease option to git-push
does not parse cleanly. Clean up the wording and syntax to
be more sensible. Also remove redundant information in the
"--force-with-lease alone" description.
Signed-off-by: Phil Hord <hordp@cisco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --no-index" was supposed to be a poor-man's approach to
allow using Git diff goodies outside of a Git repository, without
having to patch mainstream diff implementations.
Unlike a POSIX diff that treats "diff D F" (or "diff F D") as a
request to compare D/F and F (or F and D/F) when D is a directory
and F is a file, however, we did not accept such a command line and
instead barfed with "file/directory conflict".
Imitate what POSIX diff does and append the basename of the file
after the name of the directory before comparing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The run-command interface was easy to abuse and make a pipe for us
to read from the process, wait for the process to finish and then
attempt to read its output, which is a pattern that lead to a
deadlock. Fix such uses by introducing a helper to do this
correctly (i.e. we need to read first and then wait the process to
finish) and also add code to prevent such abuse in the run-command
helper.
* jk/run-command-capture:
run-command: forbid using run_command with piped output
trailer: use capture_command
submodule: use capture_command
wt-status: use capture_command
run-command: introduce capture_command helper
wt_status: fix signedness mismatch in strbuf_read call
wt-status: don't flush before running "submodule status"
"git prune" used to largely ignore broken refs when deciding which
objects are still being used, which could spread an existing small
damage and make it a larger one.
* jk/prune-with-corrupt-refs:
refs.c: drop curate_packed_refs
repack: turn on "ref paranoia" when doing a destructive repack
prune: turn on ref_paranoia flag
refs: introduce a "ref paranoia" flag
t5312: test object deletion code paths in a corrupted repository
The split-index mode introduced at v2.3.0-rc0~41 was broken in the
codepath to protect us against a broken reimplementation of Git
that writes an invalid index with duplicated index entries, etc.
* tg/fix-check-order-with-split-index:
read-cache: fix reading of split index
"git fetch" that fetches a commit using the allow-tip-sha1-in-want
extension could have failed to fetch all the requested refs.
* jk/fetch-pack:
fetch-pack: remove dead assignment to ref->new_sha1
fetch_refs_via_pack: free extra copy of refs
filter_ref: make a copy of extra "sought" entries
filter_ref: avoid overwriting ref->old_sha1 with garbage
An failure early in the "git clone" that started creating the
working tree and repository could have resulted in some directories
and files left without getting cleaned up.
* jk/cleanup-failed-clone:
clone: drop period from end of die_errno message
clone: initialize atexit cleanup handler earlier
Recommend format-patch and send-email for those who want to submit
patches to this project.
* jc/submitting-patches-mention-send-email:
SubmittingPatches: encourage users to use format-patch and send-email
"git log --graph --no-walk A B..." is a otcnflicting request that
asks nonsense; no-walk tells us show discrete points in the
history, while graph asks to draw connections between these
discrete points. Forbid the combination.
* dj/log-graph-with-no-walk:
revision: forbid combining --graph and --no-walk
"git rev-list --bisect --first-parent" does not work (yet) and can
even cause SEGV; forbid it. "git log --bisect --first-parent"
would not be useful until "git bisect --first-parent" materializes,
so it is also forbidden for now.
* kd/rev-list-bisect-first-parent:
rev-list: refuse --first-parent combined with --bisect
Even though "git grep --quiet" is run merely to ask for the exit
status, we spawned the pager regardless. Stop doing that.
* ws/grep-quiet-no-pager:
grep: fix "--quiet" overwriting current output
The prompt script (in contrib/) did not show the untracked sign
when working in a subdirectory without any untracked files.
* ct/prompt-untracked-fix:
git prompt: use toplevel to find untracked files
The idea of this helper is that we want to save the current
value of a config variable and then restore it again after
the test completes. However, there's no point in actually
saving the value; it should always be restored to the string
"never" (which you can confirm by instrumenting
save_confirm to print the value it finds).
Let's just replace it with a single test_when_finished call.
Suggested-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests are not wrong, but it is much shorter and more
idiomatic to say "verbose" or "test_must_fail" rather than
printing our own messages on failure. Likewise, there is no
need to say "happy" at the end of a test; the test suite
takes care of that.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since shell loops may drop the exit code of failed commands
inside the loop, some tests try to keep track of the status
by setting a variable. This can end up cumbersome and hard
to read; it is much simpler to just exit directly from the
loop using "return 1" (since each case is either in a helper
function or inside a test snippet).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are all cases where we do a setup step of the form:
for i in $foo; do
set_up $i || break
done &&
more_setup
would not notice a failure in set_up (because break always
returns a 0 exit code). These are just setup steps that we
do not expect to fail, but it does not hurt to be defensive.
Most can be fixed by converting the "break" to a "return 1"
(since we eval our tests inside a function for just this
purpose). A few of the loops are inside subshells, so we can
use just "exit 1" to break out of the subshell. And a few
can actually be made shorter by just unrolling the loop.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checking a list of file mtimes, we use a loop and break
out early from the loop if any entry does not match.
However, the exit code of a loop exited via break is always
0, meaning that the test will fail to notice we had a
mismatch. Since the loop is inside a function, we can fix
this by doing an early "return 1".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we test deleting notes, we run "git notes remove" in a
loop. However, the exit value of the loop will only reflect
the final note we process. We should break out of the loop
with a failing exit code as soon as we see a problem.
Note that we can call "exit 1" here without explicitly
creating a subshell, because the while loop on the
right-hand side of a pipe executes in its own implicit
subshell.
Note also that the "break" above does not suffer the same
problem; it is meant to exit the loop early at a certain
number of iterations. We can bump it into the conditional of
the loop to make this more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A loop like:
for f in one two; do
something $f ||
break
done
will correctly break out of the loop when we see a failure
of one item, but the resulting exit code will always be
zero. We can fix that by putting the loop into a function or
subshell, but in this case it is simpler still to just
unroll the loop. We do add a helper function, which
hopefully makes the end result even more readable (in
addition to being shorter).
Reported-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When copying the test repository, we try to detect whether
the copy succeeded. However, most of the heavy lifting is
done inside a for loop, where our "break" will lose the exit
code of the failing "cp". We can take advantage of the fact
that we are in a subshell, and just "exit 1" to break out
with a code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://ozlabs.org/~paulus/gitk:
gitk: Update .po files
gitk: l10n: Add Catalan translation
gitk: Fix typo in Russian translation
gitk: Remove tcl-format flag from a message that shouldn't have it
gitk: Pass --invert-grep option down to "git log"
gitk: Synchronize config file writes
gitk: Report errors in saving config file
gitk: Only write changed configuration variables
gitk: Enable mouse horizontal scrolling in diff pane
gitk: Default wrcomcmd to use --pretty=email
The expected call sequence is for the caller to use match_pathspec()
repeatedly on a set of pathspecs, accumulating the "hits" in a
separate array, and then call this function to diagnose a pathspec
that never matched anything, as that can indicate a typo from the
command line, e.g. "git commit Maekfile".
Many builtin commands use this function from builtin/ls-files.c,
which is not a very healthy arrangement. ls-files might have been
the first command to feel the need for such a helper, but the need
is shared by everybody who uses the "match and then report" pattern.
Move it to dir.c where match_pathspec() is defined.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The cleanup function is used in 4 places now and it's always safe to
free up the memory as well.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t1501-worktree.sh does not copy the shared index in the "relative
$GIT_WORK_TREE and git subprocesses" test, which makes the test fail
when GIT_TEST_SPLIT_INDEX is set. Copy the shared index as well in
order to fix this.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0302 now tests git-credential-store's support for the XDG user-specific
configuration file $XDG_CONFIG_HOME/git/credentials. Specifically:
* Ensure that the XDG file is strictly opt-in. It should not be created
by git at all times if it does not exist.
* Conversely, if the XDG file exists, ~/.git-credentials should
not be created at all times.
* If both the XDG file and ~/.git-credentials exists, then both files
should be used for credential lookups. However, credentials should
only be written to ~/.git-credentials.
* Credentials must be erased from both files.
* $XDG_CONFIG_HOME can be a custom directory set by the user as per the
XDG base directory specification. Test that git-credential-store
respects that, but defaults to "~/.config/git/credentials" if it does
not exist or is empty.
Helped-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add $XDG_CONFIG_HOME/git/credentials to the default credential search
path of git-credential-store. This allows git-credential-store to
support user-specific configuration files in accordance with the XDG
base directory specification[1].
[1] http://standards.freedesktop.org/basedir-spec/basedir-spec-0.7.html
~/.git-credentials has a higher precedence than
$XDG_CONFIG_HOME/git/credentials when looking up credentials. This
means that if any duplicate matching credentials are found in the xdg
file (due to ~/.git-credentials being updated by old versions of git or
outdated tools), they will not be used at all. This is to give the user
some leeway in switching to old versions of git while keeping the xdg
directory. This is consistent with the behavior of git-config.
However, the higher precedence of ~/.git-credentials means that as long
as ~/.git-credentials exist, all credentials will be written to the
~/.git-credentials file even if the user has an xdg file as having a
~/.git-credentials file indicates that the user wants to preserve
backwards-compatibility. This is also consistent with the behavior of
git-config.
To make this precedence explicit in docs/git-credential-store, add a new
section FILES that lists out the credential file paths in their order of
precedence, and explain how the ordering affects the lookup, storage and
erase operations.
Also, update the documentation for --file to briefly explain the
operations on multiple files if the --file option is not provided.
Since the xdg file will not be used unless it actually exists, to
prevent the situation where some credentials are present in the xdg file
while some are present in the home file, users are recommended to not
create the xdg file if they require compatibility with old versions of
git or outdated tools. Note, though, that "erase" can be used to
explicitly erase matching credentials from all files.
Helped-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, git-credential-store only supported storing credentials in a
single file: ~/.git-credentials. In order to support the XDG base
directory specification[1], git-credential-store needs to be able to
lookup and erase credentials from multiple files, as well as to pick the
appropriate file to write to so that the credentials can be found on
subsequent lookups.
[1] http://standards.freedesktop.org/basedir-spec/basedir-spec-0.7.html
Note that some credential storage files may not be owned, readable or
writable by the user, as they may be system-wide files that are meant to
apply to every user.
Instead of a single file path, lookup_credential(), remove_credential()
and store_credential() now take a precedence-ordered string_list of
file paths. lookup_credential() expects both user-specific and
system-wide credential files to be provided to support the use case of
system administrators setting default credentials for users.
remove_credential() and store_credential() expect only the user-specific
credential files to be provided as usually the only config files that
users are allowed to edit are their own user-specific ones.
lookup_credential() will read these (user-specific and system-wide) file
paths in order until it finds the 1st matching credential and print it.
As some files may be private and thus unreadable, any file which cannot
be read will be ignored silently.
remove_credential() will erase credentials from all (user-specific)
files in the list. This is because if credentials are only erased from
the file with the highest precedence, a matching credential may still be
found in a file further down the list. (Note that due to the lockfile
code, this requires the directory to be writable, which should be so for
user-specific config files)
store_credential() will write the credentials to the first existing
(user-specific) file in the list. If none of the files in the list
exist, store_credential() will write to the filename specified by the
first item of the filename list. For backwards compatibility, this
filename should be "~/.git-credentials".
Helped-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the first look, a user may think the default version is "23". Even
with UNIX background, there's no reference anywhere close that may
indicate this is glob or regex.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Entries added by "git add -N" are reminder for the user so that they
don't forget to add them before committing. These entries appear in
the index even though they are not real. Their presence in the index
leads to a confusing "git status" like this:
On branch master
Changes to be committed:
new file: foo
Changes not staged for commit:
modified: foo
If you do a "git commit", "foo" will not be included even though
"status" reports it as "to be committed". This patch changes the
output to become
On branch master
Changes not staged for commit:
new file: foo
no changes added to commit
The two hunks in diff-lib.c adjust "diff-index" and "diff-files" so
that i-t-a entries appear as new files in diff-files and nothing in
diff-index.
Due to this change, diff-files may start to report "new files" for the
first time. "add -u" needs to be told about this or it will die in
denial, screaming "new files can't exist! Reality is wrong." Luckily,
it's the only one among run_diff_files() callers that needs fixing.
Now in the new world order, a hierarchy in the index that contain
i-t-a paths is written out as a tree object as if these i-t-a
entries do not exist, and comparing the index with such a tree
object that would result from writing out the hierarchy will result
in no difference. Update a test in t2203 that expected the i-t-a
entries to appear as "added to the index" in the comparison to
instead expect no output.
An earlier change eec3e7e4 (cache-tree: invalidate i-t-a paths after
generating trees, 2012-12-16) becomes an unnecessary pessimization
in the new world order---a cache-tree in the index that corresponds
to a hierarchy with i-t-a paths can now be marked as valid and
record the object name of the tree that results from writing a tree
object out of that hierarchy, as it will compare equal to that tree.
Reverting the commit is left for the future, though, as it is purely
a performance issue and no longer affects correctness.
Helped-by: Michael J Gruber <git@drmicha.warpmail.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code that reads from the ctags file in the completion script
(in contrib/) did not spell ${param/pattern/string} substitution
correctly, which happened to work with bash but not with zsh.
* js/completion-ctags-pattern-substitution-fix:
contrib/completion: escape the forward slash in __git_match_ctag
Restructure "git push" codepath to make it easier to add new
configuration bits and then add push.followTags configuration that
turns --follow-tags option on by default.
* jk/push-config:
push: allow --follow-tags to be set by config push.followTags
cmd_push: pass "flags" pointer to config callback
cmd_push: set "atomic" bit directly
git_push_config: drop cargo-culted wt_status pointer
Test fixes.
* jk/test-annoyances:
t5551: make EXPENSIVE test cheaper
t5541: move run_with_cmdline_limit to test-lib.sh
t: pass GIT_TRACE through Apache
t: redirect stderr GIT_TRACE to descriptor 4
t: translate SIGINT to an exit
The transfer.hiderefs support did not quite work for smart-http
transport.
* jk/smart-http-hide-refs:
upload-pack: do not check NULL return of lookup_unknown_object
upload-pack: fix transfer.hiderefs over smart-http
"git tag -h" used to show the "--column" and "--sort" options
that are about listing in a wrong section.
* jk/tag-h-column-is-a-listing-option:
tag: fix some mis-organized options in "-h" listing
"git log --decorate" did not reset colors correctly around the
branch names.
* jc/decorate-leaky-separator-color:
log --decorate: do not leak "commit" color into the next item
Documentation/config.txt: simplify boolean description in the syntax section
Documentation/config.txt: describe 'color' value type in the "Values" section
Documentation/config.txt: have a separate "Values" section
Documentation/config.txt: describe the structure first and then meaning
Documentation/config.txt: explain multi-valued variables once
Documentation/config.txt: avoid unnecessary negation
"git -C '' subcmd" refused to work in the current directory, unlike
"cd ''" which silently behaves as a no-op.
* kn/git-cd-to-empty:
git: treat "git -C '<path>'" as a no-op when <path> is empty
"git imap-send" learned to optionally talk with an IMAP server via
libcURL; because there is no other option when Git is built with
NO_OPENSSL option, use that codepath by default under such
configuration.
* km/imap-send-libcurl-options:
imap-send: use cURL automatically when NO_OPENSSL defined
Workarounds for certain build of GPG that triggered false breakage
in a test.
* mg/verify-commit:
t7510: do not fail when gpg warns about insecure memory
"git rebase -i" recently started to include the number of
commits in the insn sheet to be processed, but on a platform
that prepends leading whitespaces to "wc -l" output, the numbers
are shown with extra whitespaces that aren't necessary.
* es/rebase-i-count-todo:
rebase-interactive: re-word "item count" comment
rebase-interactive: suppress whitespace preceding item count
We did not parse username followed by literal IPv6 address in SSH
transport URLs, e.g. ssh://user@[2001:db8::1]:22/repo.git
correctly.
* tb/connect-ipv6-parse-fix:
t5500: show user name and host in diag-url
t5601: add more test cases for IPV6
connect.c: allow ssh://user@[2001:db8::1]/repo.git
`ce` is allocated in make_cache_entry and should be freed if it is not
used any more. refresh_cache_entry as a wrapper around refresh_cache_ent
will either return
- the `ce` given as the parameter, when it was up-to-date;
- a new updated cache entry which is allocated to new memory; or
- a NULL when refreshing failed.
In the latter two cases, the original cache-entry `ce` is not used
and needs to be freed. The rule can be expressed as "if the return
value from refresh is different from the original ce, ce is no
longer used."
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We allocate a cache-entry pretty early in the function and then
decide either not to do anything when we are pretending to add, or
add it and then get an error (another possibility is obviously to
succeed).
When pretending or failing to add, we forgot to free the
cache-entry.
Noticed during a discussion on Stefan's patch to change the coding
style without fixing the issue ;-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
preq is NULL as the condition the line before dictates. And the cleanup
function release_http_pack_request is not null pointer safe.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These string_list instances were allocated by get_renames() and
get_unmerged for the sole use of this caller, and the function is
responsible for freeing them, not just their contents.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
oldlines is allocated earlier in the function and also freed on the
successful code path.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because run_command both spawns and wait()s for the command
before returning control to the caller, any reads from the
pipes we open must necessarily happen after wait() returns.
This can lead to deadlock, as the child process may block
on writing to us while we are blocked waiting for it to
exit.
Worse, it only happens when the child fills the pipe
buffer, which means that the problem may come and go
depending on the platform and the size of the output
produced by the child.
Let's detect and flag this dangerous construct so that we
can catch potential bugs early in the test suite rather than
having them happen in the field.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we read from a trailer.*.command sub-program, the
current code uses run_command followed by a pipe read, which
can result in deadlock (though in practice you would have to
have a large trailer for this to be a problem). The current
code also leaks the file descriptor for the pipe to the
sub-command.
Instead, let's use capture_command, which makes this simpler
(and we can get rid of our custom helper).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In is_submodule_commit_present, we call run_command followed
by a pipe read, which is prone to deadlock. It is unlikely
to happen in this case, as rev-list should never produce
more than a single line of output, but it does not hurt to
avoid an anti-pattern (and using the helper simplifies the
setup and cleanup).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we spawn "git submodule status" to read its output, we
use run_command() followed by strbuf_read() read from the
pipe. This can deadlock if the subprocess output is larger
than the system pipe buffer.
Furthermore, if start_command() fails, we'll try to read
from a bogus descriptor (probably "-1" or a descriptor we
just closed, but it is a bad idea for us to make assumptions
about how start_command implements its error handling). And
if start_command succeeds, we leak the file descriptor for
the pipe to the child.
All of these can be solved by using the capture_command
helper.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Something as simple as reading the stdout from a command
turns out to be rather hard to do right. Doing:
cmd.out = -1;
run_command(&cmd);
strbuf_read(&buf, cmd.out, 0);
can result in deadlock if the child process produces a large
amount of output. What happens is:
1. The parent spawns the child with its stdout connected
to a pipe, of which the parent is the sole reader.
2. The parent calls wait(), blocking until the child exits.
3. The child writes to stdout. If it writes more data than
the OS pipe buffer can hold, the write() call will
block.
This is a deadlock; the parent is waiting for the child to
exit, and the child is waiting for the parent to call
read().
So we might try instead:
start_command(&cmd);
strbuf_read(&buf, cmd.out, 0);
finish_command(&cmd);
But that is not quite right either. We are examining cmd.out
and running finish_command whether start_command succeeded
or not, which is wrong. Moreover, these snippets do not do
any error handling. If our read() fails, we must make sure
to still call finish_command (to reap the child process).
And both snippets failed to close the cmd.out descriptor,
which they must do (provided start_command succeeded).
Let's introduce a run-command helper that can make this a
bit simpler for callers to get right.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do that almost everywhere, because it's faster for large number of
refs, see a31e62629 (completion: optimize refs completion, 2011-10-15).
These were the last two places where we still used __gitcomp() for
completing refs.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We call strbuf_read(), and want to know whether we got any
output. To do so, we assign the result to a size_t, and
check whether it is non-zero.
But strbuf_read returns a signed ssize_t. If it encounters
an error, it will return -1, and we'll end up treating this
the same as if we had gotten output. Instead, we can just
check whether our buffer has anything in it (which is what
we care about anyway, and is the same thing since we know
the buffer was empty to begin with).
Note that the "len" variable actually has two roles in this
function. Now that we've eliminated the first, we can push the
declaration closer to the point of use for the second one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a holdover from the original implementation in
ac8d5af (builtin-status: submodule summary support,
2008-04-12), which just had the sub-process output to our
descriptor; we had to make sure we had flushed any data that
we produced before it started writing.
Since 3ba7407 (submodule summary: ignore --for-status
option, 2013-09-06), however, we pipe the sub-process output
back to ourselves. So there's no longer any need to flush
(it does not hurt, but it may leave readers wondering why we
do it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`old` is not used outside the loop and would get lost
once we reach the goto.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This frees `ce` would be leaking in the error path.
Additionally a free is moved towards the return. This helps code
readability as we often have this pattern of freeing resources just
before return/exit and not in between the code.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing &&, detected by the --chain-lint option
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The split index extension uses ewah bitmaps to mark index entries as
deleted, instead of removing them from the index directly. This can
result in an on-disk index, in which entries of stage #0 and higher
stages appear, which are removed later when the index bases are merged.
15999d0 read_index_from(): catch out of order entries when reading an
index file introduces a check which checks if the entries are in order
after each index entry is read in do_read_index. This check may however
fail when a split index is read.
Fix this by moving checking the index after we know there is no split
index or after the split index bases are successfully merged instead.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Output from "git log --decorate" mentions HEAD when it points at a
tip of an branch differently from a detached HEAD.
This is a potentially backward-incompatible change.
* mg/log-decorate-HEAD:
log: decorate HEAD with branch name
"git log --decorate" did not reset colors correctly around the
branch names.
* jc/decorate-leaky-separator-color:
log --decorate: do not leak "commit" color into the next item
Documentation/config.txt: simplify boolean description in the syntax section
Documentation/config.txt: describe 'color' value type in the "Values" section
Documentation/config.txt: have a separate "Values" section
Documentation/config.txt: describe the structure first and then meaning
Documentation/config.txt: explain multi-valued variables once
Documentation/config.txt: avoid unnecessary negation
Workarounds for certain build of GPG that triggered false breakage
in a test.
* mg/verify-commit:
t7510: do not fail when gpg warns about insecure memory
"git imap-send" learned to optionally talk with an IMAP server via
libcURL; because there is no other option when Git is built with
NO_OPENSSL option, use that codepath by default under such
configuration.
* km/imap-send-libcurl-options:
imap-send: use cURL automatically when NO_OPENSSL defined
We now detect number of CPUs on older BSD-derived systems.
* km/bsd-sysctl:
thread-utils.c: detect CPU count on older BSD-like systems
configure: support HAVE_BSD_SYSCTL option
Portability fixes and workarounds for shell scripts have been added
to help BSD-derived systems.
* km/bsd-shells:
t5528: do not fail with FreeBSD shell
help.c: use SHELL_PATH instead of hard-coded "/bin/sh"
git-compat-util.h: move SHELL_PATH default into header
git-instaweb: use @SHELL_PATH@ instead of /bin/sh
git-instaweb: allow running in a working tree subdirectory
Code in "git daemon" to parse out and hold hostnames used in
request interpolation has been simplified.
* rs/daemon-hostname-in-strbuf:
daemon: deglobalize hostname information
daemon: use strbuf for hostname info
"git branch" on a detached HEAD always said "(detached from xyz)",
even when "git status" would report "detached at xyz". The HEAD is
actually at xyz and haven't been moved since it was detached in
such a case, but the user cannot read what the current value of
HEAD is when "detached from" is used.
* mg/detached-head-report:
branch: name detached HEAD analogous to status
wt-status: refactor detached HEAD analysis
"git -C '' subcmd" refused to work in the current directory, unlike
"cd ''" which silently behaves as a no-op.
* kn/git-cd-to-empty:
git: treat "git -C '<path>'" as a no-op when <path> is empty
The versionsort.prerelease configuration variable can be used to
specify that v1.0-pre1 comes before v1.0.
* nd/versioncmp-prereleases:
config.txt: update versioncmp.prereleaseSuffix
versionsort: support reorder prerelease suffixes
When we delete a ref, we have to rewrite the entire
packed-refs file. We take this opportunity to "curate" the
packed-refs file and drop any entries that are crufty or
broken.
Dropping broken entries (e.g., with bogus names, or ones
that point to missing objects) is actively a bad idea, as it
means that we lose any notion that the data was there in the
first place. Aside from the general hackiness that we might
lose any information about ref "foo" while deleting an
unrelated ref "bar", this may seriously hamper any attempts
by the user at recovering from the corruption in "foo".
They will lose the sha1 and name of "foo"; the exact pointer
may still be useful even if they recover missing objects
from a different copy of the repository. But worse, once the
ref is gone, there is no trace of the corruption. A
follow-up "git prune" may delete objects, even though it
would otherwise bail when seeing corruption.
We could just drop the "broken" bits from
curate_packed_refs, and continue to drop the "crufty" bits:
refs whose loose counterpart exists in the filesystem. This
is not wrong to do, and it does have the advantage that we
may write out a slightly smaller packed-refs file. But it
has two disadvantages:
1. It is a potential source of races or mistakes with
respect to these refs that are otherwise unrelated to
the operation. To my knowledge, there aren't any active
problems in this area, but it seems like an unnecessary
risk.
2. We have to spend time looking up the matching loose
refs for every item in the packed-refs file. If you
have a large number of packed refs that do not change,
that outweighs the benefit from writing out a smaller
packed-refs file (it doesn't get smaller, and you do a
bunch of directory traversal to find that out).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are repacking with "-ad", we will drop any unreachable
objects. Likewise, using "-Ad --unpack-unreachable=<time>"
will drop any old, unreachable objects. In these cases, we
want to make sure the reachability we compute with "--all"
is complete. We can do this by passing GIT_REF_PARANOIA=1 in
the environment to pack-objects.
Note that "-Ad" is safe already, because it only loosens
unreachable objects. It is up to "git prune" to avoid
deleting them.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prune should know about broken objects at the tips of refs,
so that we can feed them to our traversal rather than
ignoring them. It's better for us to abort the operation on
the broken object than it is to start deleting objects with
an incomplete view of the reachability namespace.
Note that for missing objects, aborting is the best we can
do. For a badly-named ref, we technically could use its sha1
as a reachability tip. However, the iteration code just
feeds us a null sha1, so there would be a reasonable amount
of code involved to pass down our wishes. It's not really
worth trying to do better, because this is a case that
should happen extremely rarely, and the message we provide:
fatal: unable to parse object: refs/heads/bogus:name
is probably enough to point the user in the right direction.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most operations that iterate over refs are happy to ignore
broken cruft. However, some operations should be performed
with knowledge of these broken refs, because it is better
for the operation to choke on a missing object than it is to
silently pretend that the ref did not exist (e.g., if we are
computing the set of reachable tips in order to prune
objects).
These processes could just call for_each_rawref, except that
ref iteration is often hidden behind other interfaces. For
instance, for a destructive "repack -ad", we would have to
inform "pack-objects" that we are destructive, and then it
would in turn have to tell the revision code that our
"--all" should include broken refs.
It's much simpler to just set a global for "dangerous"
operations that includes broken refs in all iterations.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are doing a destructive operation like "git prune",
we want to be extra careful that the set of reachable tips
we compute is valid. If there is any corruption or oddity,
we are better off aborting the operation and letting the
user figure things out rather than plowing ahead and
possibly deleting some data that cannot be recovered.
The tests here include:
1. Pruning objects mentioned only be refs with invalid
names. This used to abort prior to d0f810f (refs.c:
allow listing and deleting badly named refs,
2014-09-03), but since then we silently ignore the tip.
Likewise, we test repacking that can drop objects
(either "-ad", which drops anything unreachable,
or "-Ad --unpack-unreachable=<time>", which tries to
optimize out a loose object write that would be
directly pruned).
2. Pruning objects when some refs point to missing
objects. We don't know whether any dangling objects
would have been reachable from the missing objects. We
are better to keep them around, as they are better than
nothing for helping the user recover history.
3. Packed refs that point to missing objects can sometimes
be dropped. By itself, this is more of an annoyance
(you do not have the object anyway; even if you can
recover it from elsewhere, all you are losing is a
placeholder for your state at the time of corruption).
But coupled with (2), if we drop the ref and then go
on to prune, we may lose unrecoverable objects.
Note that we use test_might_fail for some of the operations.
In some cases, it would be appropriate to abort the
operation, and in others, it might be acceptable to continue
but taking the information into account. The tests don't
care either way, and check only for data loss.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The different index versions have different sha-1 checksums. Those
checksums are checked in t1700, which makes it fail when the test suite
is run with TEST_GIT_INDEX_VERSION=4. Fix it.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of these cases are moderate since they would most probably not
lead to missed failing tests; either they would fail otherwise, or
fail a rm in test_when_finished only.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test is special for several reasons:
It ends with a "true" statement, which should be a no-op.
It is not because the &&-chain is broken right before it.
Also, looking at what the test intended to test according to
7f578c5 (git-svn: --follow-parent now works on sub-directories of larger
branches, 2007-01-24)
it is not clear how it would achieve that with the given steps.
Amend the test to include the second svn id to be tested for, and
change the tested refs to the ones which are to be expected, and which
make the test pass.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This use of "||" fools --chain-lint into thinking the
&&-chain is broken (and indeed, it is somewhat broken; a
failure of update-index in these tests would show the patch
file, even if we never got to the part of the test where we
fed the patch to git-apply).
The extra blocks were there to include more debugging
output, but it hardly seems worth it; the user should know
which command failed (because git-apply will produce error
messages) and can look in the trash directory themselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ":" noop command always returns true, so it is fine to
include these lines in an &&-chain (and it appeases
--chain-lint).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test uses single quotes inside the single-quoted test
snippet, which effectively makes the contents unquoted.
Since they don't need quoted anyway, this isn't a problem,
but let's switch them to double-quotes to make it more
obviously correct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the symlink tests check an either-or case using the
"||". This is not wrong, but fools --chain-lint into
thinking the &&-chain is broken (in fact, there is no &&
chain here).
We can solve this by wrapping the "||" inside a {} block.
This is a bit more verbose, but this construct is rare, and
the {} block helps call attention to it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The confirmation tests in t9001 all save the value of
sendemail.confirm, do something to it, then restore it at
the end, in a way that breaks the &&-chain (they are not
wrong, because they save the $? value, but it fools
--chain-lint).
Instead, they can all use test_when_finished, and we can
even make the code simpler by factoring out the shared
lines.
Note that we can _almost_ use test_config here, except that:
1. We do not restore the config with test_unconfig, but by
setting it back to some prior value.
2. We are not always setting a config variable. Sometimes
the change to be undone is unsetting it entirely.
We could teach test_config to handle these cases, but it's
not worth the complexity for a single call-site.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can use test_must_fail and test_path_* to avoid some
hand-rolled if statements. This makes the code shorter, and
makes it more obvious when we are breaking the &&-chain.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These say roughly the same thing as the hand-rolled
messages. We do lose the "merge did not complete" debug
message, but merge and write-tree are prefectly capable of
writing useful error messages when they fail.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test contains a lot of hand-rolled messages to show
when the test fails. We can omit most of these by using
"verbose" and "test_must_fail". A few of them are for
update-index, but we can assume it produces reasonable error
messages when it fails.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can get rid of a lot of hand-rolled error messages by
using test_must_fail and test_expect_code. The existing code
was careful to use "|| return 1" when breaking the
&&-chain, but it did fool --chain-lint; the new code is more
idiomatic.
We also add some uses of test_when_finished, which is less
cryptic and more robust than putting code at the end of a
test. In two cases we run "git bisect reset" from a
subshell, which is a problem for test_when_finished (it
would not run). However, in both of these cases, we are
performing the tests in one-off sub-repos, so we do not need
to clean up at all (and in fact it is nicer not to if the
user wants to inspect the trash directory after a failure).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script misses a trivial &&-chain in one of its tests,
but it also has a weird reverse: it includes an &&-chain
outside of any test_expect block! This "cat" should never
fail, but if it did, we would not notice, as it would cause
us to skip the follow-on test entirely (which does not
appear intentional; there are many later tests which rely on
this cat).
Let's instead move the setup into its own test_expect_success
block, which is the standard practice nowadays.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of these breakages is in setup, but one is more severe
and may miss a real test failure. These are pulled out from
the rest, though, because we also clean up a few other
anachronisms. The most interesting is the use of this
here-doc construct:
(cat >... <<EOF
...
EOF
) &&
It looks like an attempt to make the &&-chaining more
natural by letting it come at the end of the here-doc. But
the extra sub-shell is so non-idiomatic (plus the lack of
"<<-") that it ends up confusing.
Since these are just using a single line, we can accomplish
the same thing with a single printf (which also makes the
use of tab more obvious than the verbatim whitespace).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with the earlier patch to fix "trivial" &&-chain
breakage, these missing "&&" operators are not a serious
problem (e.g., we do not expect "echo" to fail).
Ironically, however, inserting them shows that some of the
commands _do_ fail. Specifically, some of the tests start by
making sure we are at a commit with the string "content" in
the file "foo". However, running "git commit" may fail
because the previous test left us in that state already, and
there is nothing to commit.
We could remove these commands entirely, but they serve to
document the test's assumptions, as well as make it robust
when an earlier test has failed. We could use test_might_fail
to handle all cases, but that would miss an unrelated
failure to make the commit. Instead, we can just pass the
--allow-empty flag to git-commit, which means that it will
not complain if our setup is a noop.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ":" is not a comment marker, but rather a noop command.
Using it as a comment like:
: do something
cmd1 &&
: something else
cmd2
breaks the &&-chain, and we would fail to notice if "cmd1"
failed in this instance. We can just use regular "#"
comments instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are expecting a command to produce a particular exit
code, we can use test_expect_code. However, some cases are
more complicated, and want to accept one of a range of exit
codes. For these, we end up with something like:
cmd;
case "$?" in
...
That unfortunately breaks the &&-chain and fools
--chain-lint. Since these special cases are so few, we can
wrap them in a block, like this:
{ cmd; ret=$?; } &&
case "$ret" in
...
This accomplishes the same thing, and retains the &&-chain
(the exit status fed to the && is that of the assignment,
which should always be true). It's technically longer, but
it is probably a good thing for unusual code like this to
stand out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes our output in the event of a failure slightly
nicer, and it means that we do not break the &&-chain.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests run diff or grep to produce an output, and then
compare the output to an expected value. We know the exit
code we expect these processes to have (e.g., grep yields 0
if it produced output and 1 otherwise), so it would not make
the test wrong to look for it. But the difference between
their output and the expected output (e.g., shown by
test_cmp) is much more useful to somebody debugging the test
than the test just bailing out.
These tests break the &&-chain to skip the exit-code check
of the process. However, we can get the same effect by using
test_might_fail. Note that in some cases the test did use
"|| return 1", which meant the test was not wrong, but it
did fool --chain-lint.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests have an initial setup step that might fail based
on whether earlier tests in the script have succeeded or
not. Using a trick like "|| true" breaks the &&-chain,
missing earlier failures (and fooling --chain-lint).
We can use test_might_fail in some cases, which is correct
and makes the intent more obvious. We can also use
test_unconfig for unsetting config (and which is more
robust, as well).
The case in t9500 is an oddball. It wants to run cmd1 _or_
cmd2, and does it like:
cmd1 || cmd2 &&
other_stuff
It's not wrong in this case, but it's a bad habit to get
into, because it breaks the &&-chain if used anywhere except
at the beginning of the test (and we use the correct
solution here, putting it inside a block for precedence).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These test scripts likely predate test_must_fail, and can be
made simpler by using it (in addition to making them pass
--chain-lint).
The case in t6036 loses some verbosity in the failure case,
but it is so tied to a specific failure mode that it is not
worth keeping around (and the outcome of the test is not
affected at all).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests that predate the "verbose" helper function use a
pattern like:
test ... || {
echo ...
false
}
to give more verbose output. Using the helper, we can do
this with a single line, and avoid a || which interacts
badly with &&-chaining (besides fooling --chain-lint, we hit
the error block no matter which command in the chain failed,
so we may often show useless results).
In most cases, the messages printed by "verbose" are equally
good (in some cases better; t6006 accidentally redirects the
message to a file!). The exception is t7001, whose output
suffers slightly. However, it's still enough to show the
user which part failed, given that we will have just printed
the test script to stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests call test_cmp, and if it fails show the actual
output generated. This is mostly pointless, as test_cmp will
already show a diff between the expected and actual output.
It also fools --chain-lint by putting an "||" in the middle
of the chain, so we'd rather not use this construct.
Note that these cases actually show a pre-processed version
of the data, rather than exactly what test_cmp would show.
However, test_cmp's output is generally good for pointing
the user in the right direction, and they can then dig in
the trash directory themselves if they want to see more
details.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are tests which are missing a link in their &&-chain,
but during a setup phase. We may fail to notice failure in
commands that build the test environment, but these are
typically not expected to fail at all (but it's still good
to double-check that our test environment is what we
expect).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are tests which are missing a link in their &&-chain,
but in a way that probably does not effect the outcome of
the test. Most of these are of the form:
some_cmd >actual
test_cmp expect actual
The main point of the test is to verify the output, and a
failure in some_cmd would probably be noticed by bogus
output. But it is good for the tests to also confirm that
"some_cmd" does not die unexpectedly after producing its
output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are tests which are missing a link in their &&-chain,
in a location which causes a significant portion of the test
to be missed (e.g., the test effectively does nothing, or
consists of a long string of actions and output comparisons,
and we throw away the exit code of at least one part of the
string).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's easy to miss an "&&"-chain in a test script, like:
test_expect_success 'check something important' '
cmd1 &&
cmd2
cmd3
'
The test harness will notice if cmd3 fails, but a failure of
cmd1 or cmd2 will go unnoticed, as their exit status is lost
after cmd3 runs.
The toy example above is easy to spot because the "cmds" are
all the same length, but real code is much more complicated.
It's also difficult to detect these situations by statically
analyzing the shell code with regexps (like the
check-non-portable-shell script does); there's too much
context required to know whether a &&-chain is appropriate
on a given line or not.
This patch instead lets the shell check each test by
sticking a command with a specific and unusual return code
at the top of each test, like:
(exit 117) &&
cmd1 &&
cmd2
cmd3
In a well-formed test, the non-zero exit from the first
command prevents any of the rest from being run, and the
test's exit code is 117. In a bad test (like the one above),
the 117 is lost, and cmd3 is run.
When we encounter a failure of this check, we abort the test
script entirely. For one thing, we have no clue which subset
of the commands in the test snippet were actually run.
Running further tests would be pointless, because we're now
in an unknown state. And two, this is not a "test failure"
in the traditional sense. The test script is buggy, not the
code it is testing. We should be able to fix these problems
in the script once, and not have them come back later as a
regression in git's code.
After checking a test snippet for --chain-lint, we do still
run the test itself. We could actually have a pure-lint
mode which just checks each test, but there are a few
reasons not to. One, because the tests are executing
arbitrary code, which could impact the later environment
(e.g., that could impact which set of tests we run at all).
And two, because a pure-lint mode would still be expensive
to run, because a significant amount of code runs outside of
the test_expect_* blocks. Instead, this option is designed
to be used as part of a normal test suite run, where it adds
very little overhead.
Turning on this option detects quite a few problems in
existing tests, which will be fixed in subsequent patches.
However, there are a number of places it cannot reach:
- it cannot find a failure to break out of loops on error,
like:
cmd1 &&
for i in a b c; do
cmd2 $i
done &&
cmd3
which will not notice failures of "cmd2 a" or "cmd b"
- it cannot find a missing &&-chain inside a block or
subfunction, like:
foo () {
cmd1
cmd2
}
foo &&
bar
which will not notice a failure of cmd1.
- it only checks tests that you run; every platform will
have some tests skipped due to missing prequisites,
so it's impossible to say from one run that the test
suite is free of broken &&-chains. However, all tests get
run by _somebody_, so eventually we will notice problems.
- it does not operate on test_when_finished or prerequisite
blocks. It could, but these tends to be much shorter and
less of a problem, so I punted on them in this patch.
This patch was inspired by an earlier patch by Jonathan
Nieder:
http://article.gmane.org/gmane.comp.version-control.git/235913
This implementation and all bugs are mine.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rev-list --bisect is used by git bisect, but never together with
--first-parent. Because rev-list --bisect together with --first-parent
is not handled currently, and even leads to segfaults, refuse to use
both options together.
Because this is not supported, it makes little sense to use git log
--bisect --first parent either, because refs/heads/bad is not limited to
the first parent chain.
Helped-by: Junio C. Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In everything_local(), we used to assign the current ref's value
found in ref->old_sha1 to ref->new_sha1 when we already have all the
necessary objects to complete the history leading to that
commit. This copying was broken at 49bb805e (Do not ask for
objects known to be complete., 2005-10-19) and ever since we
instead stuffed a random bytes in ref->new_sha1 here. No
code complained or failed due to this breakage.
It turns out that no code path that comes after this
assignment even looks at ref->new_sha1 at all.
- The only caller of everything_local(), do_fetch_pack(),
returns this list of refs, whose element has bogus
new_sha1 values, to its caller. It does not look at the
elements itself, but does pass them to find_common, which
looks only at the name and old_sha1 fields.
- The only caller of do_fetch_pack(), fetch_pack(), returns this
list to its caller. It does not look at the elements nor act on
them.
- One of the two callers of fetch_pack() is cmd_fetch_pack(), the
top-level that implements "git fetch-pack". The only thing it
looks at in the elements of the returned ref list is the old_sha1
and name fields.
- The other caller of fetch_pack() is fetch_refs_via_pack() in the
transport layer, which is a helper that implements "git fetch".
It only cares about whether the returned list is empty (i.e.
failed to fetch anything).
Just drop the bogus assignment, that is not even necessary. The
remote-tracking refs are updated based on a different list and not
using the ref list being manipulated by this code path; the caller
do_fetch_pack() created a copy of that real ref list and passed the
copy down to this function, and modifying the elements here does not
affect anything.
Noticed-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetch_refs_via_pack calls fetch_pack(), we pass a
list of refs to fetch, and the function returns either a
copy of that list, with the fetched items filled in, or
NULL. We check the return value to see whether the fetch was
successful, but do not otherwise look at the copy, and
simply leak it at the end of the function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the server supports allow_tip_sha1_in_want, we add any
unmatched raw-sha1 entries in our "sought" list of refs to
the list of refs we will ask the other side for. We do so by
inserting the original "struct ref" directly into our list,
rather than making a copy. This has several problems.
The most minor problem is that one cannot ever free the
resulting list; it contains structs that are copies of the
remote refs (made earlier by fetch_pack) along with sought
refs that are referenced elsewhere.
But more importantly that we set the ref->next pointer to
NULL, chopping off the remainder of any existing list that
the ref was a part of. We get the set of "sought" refs in
an array rather than a linked list, but that array is often
in turn generated from a list. The test modification in
t5516 demonstrates this. Rather than fetching just an exact
sha1, we fetch that sha1 plus another ref:
- we build a linked list of refs to fetch when do_fetch
calls get_ref_map; the exact sha1 is first, followed by
the named ref ("refs/heads/extra" in this case).
- we pass that linked list to transport_fetch_ref, which
squashes it into an array of pointers
- that array goes to fetch_pack, which calls filter_ref.
There we generate the want list from a mix of what the
remote side has advertised, and the "sought" entry for
the exact sha1. We set the sought entry's "next" pointer
to NULL.
- after we return from transport_fetch_refs, we then try
to update the refs by following the linked list. But our
list is now truncated, and we do not update
refs/heads/extra at all.
We can fix this by making a copy of the ref. There's nothing
that fetch_pack does to it that must be reflected in the
original "sought" list (and indeed, if that were the case we
would have a serious bug, because it is only exact-sha1
entries which are treated this way).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the server supports allow_tip_sha1_in_want, then
fetch-pack's filter_refs function tries to check whether a
ref is a request for a straight sha1 by running:
if (get_sha1_hex(ref->name, ref->old_sha1))
...
I.e., we are using get_sha1_hex to ask "is this ref name a
sha1?". If it is true, then the contents of ref->old_sha1
will end up unchanged. But if it is false, then get_sha1_hex
makes no guarantees about what it has written. With a ref
name like "abcdefoo", we would overwrite 3 bytes of
ref->old_sha1 before realizing that it was not a sha1.
This is likely not a problem in practice, as anything in
refs->name (besides a sha1) will start with "refs/", meaning
that we would notice on the first character that there is a
problem. Still, we are making assumptions about the state
left in the output when get_sha1_hex returns an error (e.g.,
it could start from the end of the string, or error check
the values only once they were placed in the output). It's
better to be defensive.
We could just check that we have exactly 40 characters of
sha1. But let's be even more careful and make sure that we
have a 40-char hex refname that matches what is in old_sha1.
This is perhaps overly defensive, but spells out our
assumptions clearly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not usually end our errors with a full stop, but it
looks especially bad when you use die_errno, which adds a
colon, like:
fatal: could not create work tree dir 'foo'.: No such file or directory
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If clone fails, we generally try to clean up any directories
we've created. We do this by installing an atexit handler,
so that we don't have to manually trigger cleanup. However,
since we install this after touching the filesystem, any
errors between our initial mkdir() and our atexit() call
will result in us leaving a crufty directory around.
We can fix this by moving our atexit() call earlier. It's OK
to do it before the junk_work_tree variable is set, because
remove_junk makes sure the variable is initialized. This
means we "activate" the handler by assigning to the
junk_work_tree variable, which we now bump down to just
after we call mkdir(). We probably do not want to do it
before, because a plausible reason for mkdir() to fail is
EEXIST (i.e., we are racing with another "git init"), and we
would not want to remove their work.
OTOH, this is probably not that big a deal; we will allow
cloning into an empty directory (and skip the mkdir), which
is already racy (i.e., one clone may see the other's empty
dir and start writing into it). Still, it does not hurt to
err on the side of caution here.
Note that writing into junk_work_tree and junk_git_dir after
installing the handler is also technically racy, as we call
our handler on an async signal. Depending on the platform,
we could see a sheared write to the variables. Traditionally
we have not worried about this, and indeed we already do
this later in the function. If we want to address that, it
can come as a separate topic.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now we return a NULL "struct sha1file" if we encounter
an error. However, the sole caller (write_idx_file) does not
check the return value, and will segfault if we hit this
case.
One option would be to handle the error in the caller.
However, there's really nothing for it to do but die. This
code path is hit during "git index-pack --verify"; after we
verify the packfile, we check that the ".idx" we would
generate from it is byte-wise identical to what is on disk.
We hit the error (and segfault) if we can't open the .idx
file (a likely cause of this is that somebody else ran "git
repack -ad" while we were verifying). Since we can't
complete the requested verification, we really have no
choice but to die.
Furthermore, the rest of the sha1fd_* functions simply die
on errors. So if were to open the file successfully, for
example, and then hit a read error, sha1write would call
die() for us. So pushing the die() down into sha1fd_check
keeps the interface consistent.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When grep is called with the --quiet option, the pager is initialized
despite not being used. When the pager is "less", anything output by
previous commands and not ended with a newline is overwritten:
$ echo -n aaa; echo bbb
aaabbb
$ echo -n aaa; git grep -q foo; echo bbb
bbb
This can be worked around, for example, by making sure STDOUT is not a
TTY or more directly by setting git's pager to "cat":
$ echo -n aaa; git grep -q foo > /dev/null; echo bbb
aaabbb
$ echo -n aaa; PAGER=cat git grep -q foo; echo bbb
aaabbb
But prevent calling the pager in the first place, which would also
save an unnecessary fork().
Signed-off-by: Wilhelm Schuermann <wimschuermann@googlemail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" now allows the "-v" to be given twice to show the
differences that are left in the working tree not to be committed.
* mg/status-v-v:
commit/status: show the index-worktree diff with -v -v
t7508: test git status -v
t7508: .gitignore 'expect' and 'output' files
"git cherry-pick" used to clean-up the log message even when it is
merely replaying an existing commit. It now replays the message
verbatim unless you are editing the message of resulting commits.
* mg/sequencer-commit-messages-always-verbatim:
sequencer: preserve commit messages
"git rebase -i" recently started to include the number of
commits in the insn sheet to be processed, but on a platform
that prepends leading whitespaces to "wc -l" output, the numbers
are shown with extra whitespaces that aren't necessary.
* es/rebase-i-count-todo:
rebase-interactive: re-word "item count" comment
rebase-interactive: suppress whitespace preceding item count
In step "(4) Sending your patches", we instruct users to do an
inline patch, avoid breaking whitespaces, avoid attachments, use
[PATCH v2] for second round, etc., all of which format-patch and
send-email combo know how to do well.
The need was identified by, and the text is based on the work by
Cody Taylor.
Suggested-by: Cody Taylor <cody.taylor@maternityneighborhood.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __git_ps1() prompt function would not show an untracked state
when all the untracked files are outside the current working
directory.
Signed-off-by: Cody A Taylor <codemister99@yahoo.com>
Helped-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xgettext sees "% o" and interprets it as a placeholder for an octal
number preceded by a space. However, in this case it's not actually a
placeholder, and most translations will replace the "% o" sequence with
something else. Removing the tcl-format flag from this string prevents
tools like Poedit from freaking out when "% o" doesn't appear in the
translated string.
The corrected flag will appear in each translation's po file the next time
the translation is updated with `make update-po`.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
"git log --grep=<string>" shows only commits with messages that
match the given string, but sometimes it is useful to be able to
show only commits that do *not* have certain messages (e.g. "show
me ones that are not FIXUP commits").
Now the underlying "git log" learned the "--invert-grep" option.
The option syntactically behaves similar to "--all-match" that
requires that all of the grep strings to match and semantically
behaves the opposite---it requires that none of the grep strings to
match.
Teach "gitk" to allow users to pass it down to underlying "git log"
command by adding it to the known_view_options array.
Signed-off-by: Christoph Junghans <ottxor@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
If several gitk instances are closed simultaneously, the savestuff
procedure can run at the same time, resulting in a conflict which may
cause losing of some of the instance's changes, failing the saving
operation or even corrupting the configuration file. This can happen,
for example, at user session closing, or at group closing of all
instances of an application which is possible in some desktop
environments.
To avoid this, make sure that only one saving operation is in
progress. It is guarded by existence of the $config_file_tmp
file. Creating the file and moving it to $config_file are both atomic
operations, so it should be reliable.
Reading does not need to be syncronized, because moving is an atomic
operation, and the $config_file always refers to a full and correct file.
But, if there is a stale $config_file_tmp file, report it at gitk start.
If such file is detected when saving, just report it abort the save, as
for other errors in saving.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
When gitk contains some changed parameter, and there is an existing
instance of gitk where the parameter is still old, it is reverted to
that old value when that instance exits.
Instead, store a parameter in config only if it has been modified in
the exiting instance. Otherwise, preserve the value which currently is in
file. This allows editing the configuration when several instances are
running, without rollback of the modification if some other
instance where the configuration was not edited is closed last.
For scalar variables, use trace(3tcl) to detect their change. Since
`trace` can send bogus events, doublecheck if the value has really
been changed, but once it is marked as changed, do not reset it back
to unchanged ever, because if user has restored the original value,
it's the decision which should be stored as well as modified value.
Treat view list especially: instead of rewriting the whole list, merge
individual views. Place old and updated views in their old places,
add new ones to the end of list. Collect modified views explicitly, in
newviewok{} and delview{}.
Do not merge geometry values. They are almost always changing because
user moves and resises windows, and there is no way to find which one of
the geometries is most desired. Just overwrite them unconditionally,
like earlier.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The current definition results in an incorrect expansion of the term under zsh.
For instance "/^${1////\\/}/" under zsh with the argument "hi" results in:
/^/\/h/\/i/
This results in an output similar to this when trying to complete `git grep
chartab` under zsh:
:: git grep chartabawk: cmd. line:1: /^/\/c/\/h/\/a/\/r/\/t/\/a/\/b/ { print $1 }
awk: cmd. line:1: ^ backslash not last character on line
awk: cmd. line:1: /^/\/c/\/h/\/a/\/r/\/t/\/a/\/b/ { print $1 }
awk: cmd. line:1: ^ syntax error
Leaving the prompt in a goofy state until the user hits a key.
Escaping the literal / in the parameter expansion (using "/^${1//\//\\/}/")
results in:
/^chartab/
allowing the completion to work correctly.
This formulation also works under bash.
Signed-off-by: John Szakmeister <john@szakmeister.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test clean-up.
* jc/diff-test-updates:
test_ln_s_add: refresh stat info of fake symbolic links
t4008: modernise style
t/diff-lib: check exact object names in compare_diff_raw
tests: do not borrow from COPYING and README from the real source
t4010: correct expected object names
t9300: correct expected object names
t4008: correct stale comments
A corrupt input to "git diff -M" can cause us to segfault.
* jk/diffcore-rename-duplicate:
diffcore-rename: avoid processing duplicate destinations
diffcore-rename: split locate_rename_dst into two functions
The borrowed code in kwset API did not follow our usual convention
to use "unsigned char" to store values that range from 0-255.
* bw/kwset-use-unsigned:
kwset: use unsigned char to store values with high-bit set
Description given by "grep -h" for its --exclude-standard option
was phrased poorly.
* nd/grep-exclude-standard-help-fix:
grep: correct help string for --exclude-standard
"git remote add" mentioned "--tags" and "--no-tags" and was not
clear that fetch from the remote in the future will use the default
behaviour when neither is given to override it.
* mg/doc-remote-tags-or-not:
git-remote.txt: describe behavior without --tags and --no-tags
"git diff --shortstat --dirstat=changes" showed a dirstat based on
lines that was never asked by the end user in addition to the
dirstat that the user asked for.
* mk/diff-shortstat-dirstat-fix:
diff --shortstat --dirstat: remove duplicate output
The interaction between "git submodule update" and the
submodule.*.update configuration was not clearly documented.
* ms/submodule-update-config-doc:
submodule: improve documentation of update subcommand
"git apply" was not very careful about reading from, removing,
updating and creating paths outside the working tree (under
--index/--cached) or the current directory (when used as a
replacement for GNU patch).
* jc/apply-beyond-symlink:
apply: do not touch a file beyond a symbolic link
apply: do not read from beyond a symbolic link
apply: do not read from the filesystem under --index
apply: reject input that touches outside the working area
"git daemon" looked up the hostname even when "%CH" and "%IP"
interpolations are not requested, which was unnecessary.
* rs/daemon-interpolate:
daemon: use callback to build interpolated path
daemon: look up client-supplied hostname lazily
The "interpolated-path" option of "git daemon" inserted any string
client declared on the "host=" capability request without checking.
Sanitize and limit %H and %CH to a saner and a valid DNS name.
* jk/daemon-interpolate:
daemon: sanitize incoming virtual hostname
t5570: test git-daemon's --interpolated-path option
git_connect: let user override virtual-host we send to daemon
Convert struct commit_graft and necessary local parts of commit.c.
Also, convert several constants based on the hex length of an SHA-1 to
use GIT_SHA1_HEXSZ, and move several magic constants into variables for
readability.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several utility functions (hashcmp and friends) that are used
for comparing object IDs (SHA-1 values). Using these functions, which
take pointers to unsigned char, with struct object_id requires tiresome
access to the sha1 member, which bloats code and violates the desired
encapsulation. Provide wrappers around these functions for struct
object_id for neater, more maintainable code. Use the new constants to
avoid the hard-coded 20s and 40s throughout the original functions.
These functions simply call the underlying pointer-to-unsigned-char
versions to ensure that any performance improvements will be passed
through to the new functions.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many places throughout the code use "unsigned char [20]" to store object IDs
(SHA-1 values). This leads to lots of hardcoded numbers throughout the
codebase. It also leads to confusion about the purposes of a buffer.
Introduce a structure for object IDs. This allows us to obtain the benefits
of compile-time checking for misuse. The structure is expected to remain
the same size and have the same alignment requirements on all known
platforms, compared to the array of unsigned char, although this is not
required for correctness.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should improve readability. Compare "thislongname" and
"thisLongName". The following keys are left in unchanged. We can
decide what to do with them later.
- am.keepcr
- core.autocrlf .safecrlf .trustctime
- diff.dirstat .noprefix
- gitcvs.usecrlfattr
- gui.blamehistoryctx .trustmtime
- pull.twohead
- receive.autogc
- sendemail.signedoffbycc .smtpsslcertpath .suppresscc
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We create 50,000 tags to check that we don't overflow the
command-line of fetch-pack. But by using run_with_cmdline_limit,
we can get the same effect with a much smaller number of
tags. This makes the test fast enough that we can drop the
EXPENSIVE prereq, which means people will actually run it.
It was not documented to do so, but this test was also the
only test of a clone-over-http that requires multiple POSTs
during the conversation. We can continue to test that by
dropping http.postbuffer to its minimum size, and checking
that we get two POSTs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use this to test http pushing with a restricted
commandline. Other scripts (like t5551, which does http
fetching) will want to use it, too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apache removes GIT_TRACE from the environment before running
git-http-backend. This can make it hard to debug the server
side of an http session. Let's let it through.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you run a test script like:
GIT_TRACE=1 ./t0061-run-command.sh
you may get test failures, because some tests capture and
check the stderr output from git commands (and with
GIT_TRACE set to 1, the trace output will be included
there).
When we see GIT_TRACE set like this, we print a warning to
the user. However, we can do even better than that by just
pointing it to descriptor 4, which all tests leave connected
to the test script's stderr. That's likely what the user
intended (and any scripts that do want to see GIT_TRACE
output will set GIT_TRACE themselves).
Not only does this avoid false negatives in the tests, but
it means the user will actually see trace output for git
calls that redirect their stderr (whereas before, it was
sometimes confusingly buried in a file).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now if a test script receives SIGINT (e.g., because a
test was hanging and the user hit ^C), the shell exits
immediately. This can be annoying if the test script did any
global setup, like starting apache or git-daemon, as it will
not have an opportunity to clean up after itself. A
subsequent run of the test won't be able to start its own
daemon, and will either fail or skip the tests.
Instead, let's trap SIGINT to make sure we do a clean
shutdown, and just chain it to a normal exit (which will
trigger any cleanup).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check whether the return value of lookup_unknown_object
is NULL, but some code paths dereference it before our
check. This turns out not to be capable of causing a
segfault, though. The lookup_unknown_object function will
never return NULL, since the whole point is to allocate an
object struct if it does not find an existing one. So the
code here is not wrong, it is just confusing. Let's just
drop the NULL check.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When upload-pack advertises the refs (either for a normal,
non-stateless request, or for the initial contact in a
stateless one), we call for_each_ref with the send_ref
function as its callback. send_ref, in turn, calls
mark_our_ref, which checks whether the ref is hidden, and
sets OUR_REF or HIDDEN_REF on the object as appropriate. If
it is hidden, mark_our_ref also returns "1" to signal
send_ref that the ref should not be advertised.
If we are not advertising refs, (i.e., the follow-up
invocation by an http client to send its "want" lines), we
use mark_our_ref directly as a callback to for_each_ref. Its
marking does the right thing, but when it then returns "1"
to for_each_ref, the latter interprets this as an error and
stops iterating. As a result, we skip marking all of the
refs that come lexicographically after it. Any "want" lines
from the client asking for those objects will fail, as they
were not properly marked with OUR_REF.
To solve this, we introduce a wrapper callback around
mark_our_ref which always returns 0 (even if the ref is
hidden, we want to keep iterating). We also tweak the
signature of mark_our_ref to exclude unnecessary parameters
that were present only to conform to the callback interface.
This should make it less likely for somebody to accidentally
use it as a callback in the future.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user enables untracked cache, then
- move worktree to an unsupported filesystem
- or simply upgrade OS
- or move the whole (portable) disk from one machine to another
- or access a shared fs from another machine
there's no guarantee that untracked cache can still function properly.
Record the worktree location and OS footprint in the cache. If it
changes, err on the safe side and disable the cache. The user can
'update-index --untracked-cache' again to make sure all conditions are
met.
This adds a new requirement that setup_git_directory* must be called
before read_cache() because we need worktree location by then, or the
cache is dropped.
This change does not cover all bases, you can fool it if you try
hard. The point is to stop accidents.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a good user sees the "too long, consider -uno" advice when
running `git status`, they should check out the man page to find out
more. This change suggests they try untracked cache before -uno.
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
update_index_if_able() is moved down so that the updated untracked
cache could be written out.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used to double check if results with untracked cache are
correctly, compared to vanilla version. Untracked cache remains in
index, but not used.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This could be used to verify correct behavior in tests
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a directory is updated within the same second that its timestamp
is last saved, we cannot realize the directory has been updated by
checking timestamps. Assume the worst (something is update). See
29e4d36 (Racy GIT - 2005-12-20) for more information.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ideally we should implement untracked_cache_remove_from_index() and
untracked_cache_add_to_index() so that they update untracked cache
right away instead of invalidating it and wait for read_directory()
next time to deal with it. But that may need some more work in
unpack-trees.c. So stay simple as the first step.
The new call in add_index_entry_with_check() may look strange because
new calls usually stay close to cache_tree_invalidate_path(). We do it
a bit later than c_t_i_p() in this function because if it's about
replacing the entry with the same name, we don't care (but cache-tree
does).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This cuts down a signficant number of open(.gitignore) because most
directories usually don't have .gitignore files.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we redo this thing in a functional style, we would have one struct
untracked_dir as input tree and another as output. The input is used
for verification. The output is a brand new tree, reflecting current
worktree.
But that means recreate a lot of dir nodes even if a lot could be
shared between input and output trees in good cases. So we go with the
messy but efficient way, combining both input and output trees into
one. We need a way to know which node in this combined tree belongs to
the output. This is the purpose of this "recurse" flag.
"valid" bit can't be used for this because it's about data of the node
except the subdirs. When we invalidate a directory, we want to keep
cached data of the subdirs intact even though we don't really know
what subdir still exists (yet). Then we check worktree to see what
actual subdir remains on disk. Those will have 'recurse' bit set
again. If cached data for those are still valid, we may be able to
avoid computing exclude files for them. Those subdirs that are deleted
will have 'recurse' remained clear and their 'valid' bits do not
matter.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main readdir loop in read_directory_recursive() is replaced with a
new one that checks if cached results of a directory is still valid.
If a file is added or removed from the index, the containing directory
is invalidated (but not its subdirs). If directory's mtime is changed,
the same happens. If a .gitignore is updated, the containing directory
and all subdirs are invalidated recursively. If dir_struct#flags or
other conditions change, the cache is ignored.
If a directory is invalidated, we opendir/readdir/closedir and run the
exclude machinery on that directory listing as usual. If untracked
cache is also enabled, we'll update the cache along the way. If a
directory is validated, we simply pull the untracked listing out from
the cache. The cache also records the list of direct subdirs that we
have to recurse in. Fully excluded directories are seen as "untracked
files".
In the best case when no dirs are invalidated, read_directory()
becomes a series of
stat(dir), open(.gitignore), fstat(), read(), close() and optionally
hash_sha1_file()
For comparison, standard read_directory() is a sequence of
opendir(), readdir(), open(.gitignore), fstat(), read(), close(), the
expensive last_exclude_matching() and closedir().
We already try not to open(.gitignore) if we know it does not exist,
so open/fstat/read/close sequence does not apply to every
directory. The sequence could be reduced further, as noted in
prep_exclude() in another patch. So in theory, the entire best-case
read_directory sequence could be reduced to a series of stat() and
nothing else.
This is not a silver bullet approach. When you compile a C file, for
example, the old .o file is removed and a new one with the same name
created, effectively invalidating the containing directory's cache
(but not its subdirectories). If your build process touches every
directory, this cache adds extra overhead for nothing, so it's a good
idea to separate generated files from tracked files.. Editors may use
the same strategy for saving files. And of course you're out of luck
running your repo on an unsupported filesystem and/or operating system.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to feed different info to read_directory_recursive()
based on untracked cache in the next patch.
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's easy to see that if an existing .gitignore changes, its SHA-1
would be different and invalidate_gitignore() is called.
If .gitignore is removed, add_excludes() will treat it like an empty
.gitignore, which again should invalidate the cached directory data.
if .gitignore is added, lookup_untracked() already fills initial
.gitignore SHA-1 as "empty file", so again invalidate_gitignore() is
called.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure the starting conditions and all global exclude files are
good to go. If not, either disable untracked cache completely, or wipe
out the cache and start fresh.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idea is if we can capture all input and (non-rescursive) output of
read_directory_recursive(), and can verify later that all the input is
the same, then the second r_d_r() should produce the same output as in
the first run.
The requirement for this to work is stat info of a directory MUST
change if an entry is added to or removed from that directory (and
should not change often otherwise). If your OS and filesystem do not
meet this requirement, untracked cache is not for you. Most file
systems on *nix should be fine. On Windows, NTFS is fine while FAT may
not be [1] even though FAT on Linux seems to be fine.
The list of input of r_d_r() is in the big comment block in dir.h. In
short, the output of a directory (not counting subdirs) mainly depends
on stat info of the directory in question, all .gitignore leading to
it and the check_only flag when r_d_r() is called recursively. This
patch records all this info (and the output) as r_d_r() runs.
Two hash_sha1_file() are required for $GIT_DIR/info/exclude and
core.excludesfile unless their stat data matches. hash_sha1_file() is
only needed when .gitignore files in the worktree are modified,
otherwise their SHA-1 in index is used (see the previous patch).
We could store stat data for .gitignore files so we don't have to
rehash them if their content is different from index, but I think
.gitignore files are rarely modified, so not worth extra cache data
(and hashing penalty read-cache.c:verify_hdr(), as we will be storing
this as an index extension).
The implication is, if you change .gitignore, you better add it to the
index soon or you lose all the benefit of untracked cache because a
modified .gitignore invalidates all subdirs recursively. This is
especially bad for .gitignore at root.
This cached output is about untracked files only, not ignored files
because the number of tracked files is usually small, so small cache
overhead, while the number of ignored files could go really high
(e.g. *.o files mixing with source code).
[1] "Description of NTFS date and time stamps for files and folders"
http://support.microsoft.com/kb/299648
Helped-by: Torsten Bögershausen <tboegi@web.de>
Helped-by: David Turner <dturner@twopensource.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is not used anywhere yet. But the goal is to compare quickly if a
.gitignore file has changed when we have the SHA-1 of both old (cached
somewhere) and new (from index or a tree) versions.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "git tag -h" currently prints:
[...]
Tag creation options
[...]
--column[=<style>] show tag list in columns
--sort <type> sort tags
Tag listing options
--contains <commit> print only tags that contain the commit
--points-at <object> print only tags of the object
The "--column" and "--sort" options should go under the "Tag listing" group.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was one continue statement without an accompanying `free(ref)`.
Instead of adding that, replace all the free&&continue with a goto
just after writing the refs, where we'd do the free anyway and then
reloop.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the standard function isxdigit() to make the intent clearer and
avoid using magic constants.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git_connect() is called to see how the URL is parsed for
debugging purposes with CONNECT_DIAG_URL set, the variable conn is
leaked. At this point in the codeflow, it only has its memory and
no other resource is associated with it, so it is sufficient to
clean it up by just freeing it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on how gpg was built, it may issue the following
message to stderr when run:
Warning: using insecure memory!
When the test is collecting gpg output it is therefore not
enough to just match on a "gpg: " prefix it must also match
on a "Warning: " prefix wherever it needs to match lines
that have been produced by gpg.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Acked-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The FreeBSD shell converts this expression:
git ${1:+-c push.default="$1"} push
to this when "$1" is not empty:
git "-c push.default=$1" push
which causes git to fail. To avoid this we simply break up the
expansion into two parts so that the whitespace which creates
two arguments instead of one is outside the ${...} like so:
git ${1:+-c} ${1:+push.default="$1"} push
This has the desired effect on all platforms allowing the test
to pass on FreeBSD.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If both USE_CURL_FOR_IMAP_SEND and NO_OPENSSL are defined do
not force the user to add --curl to get a working git imap-send
command.
Instead automatically select --curl and warn and ignore the
--no-curl option. And while we're in there, correct the
warning message when --curl is requested but not supported.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, log decorations do not indicate which branch is checked out
and whether HEAD is detached.
When branch foo is checked out, change the "HEAD, foo" part of the
decorations to "HEAD -> foo". This serves to indicate both ref
decorations (helped by the spacing) as well as their relationshsip.
As a consequence, "HEAD" without any " -> " denotes a detached HEAD now.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/decorate-leaky-separator-color:
log --decorate: do not leak "commit" color into the next item
Documentation/config.txt: simplify boolean description in the syntax section
Documentation/config.txt: describe 'color' value type in the "Values" section
Documentation/config.txt: have a separate "Values" section
Documentation/config.txt: describe the structure first and then meaning
Documentation/config.txt: explain multi-valued variables once
Documentation/config.txt: avoid unnecessary negation
Not all systems support using sysconf to detect the number
of available CPU cores. Older BSD and BSD-derived systems
only provide the information via the sysctl function.
If HAVE_BSD_SYSCTL is defined attempt to retrieve the number
of available CPU cores using the sysctl function.
If HAVE_BSD_SYSCTL is not defined or the sysctl function
fails, we still attempt to get the information via sysconf.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On BSD-compatible systems some information such as the number
of available CPUs may only be available via the sysctl function.
Add support for a HAVE_BSD_SYSCTL option complete with autoconf
support and include the sys/syctl.h header when the option is
enabled to make the sysctl function available.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user has set SHELL_PATH in the Makefile then we
should respect that value and use it.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If SHELL_PATH is not defined we use "/bin/sh". However,
run-command.c is not the only file that needs to use
the default value so move it into a common header.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user has configured a value for SHELL_PATH then
be sure to use it for any generated scripts instead of
hard-coding /bin/sh.
The first line of the script is handled specially, but
the embedded #!/bin/sh line in the here document will
not be automatically updated unless it uses @SHELL_PATH@.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various issues around "reflog expire", e.g. using --updateref when
expiring a reflog for a symbolic reference, have been corrected
and/or made saner.
* mh/expire-updateref-fixes:
reflog_expire(): never update a reference to null_sha1
reflog_expire(): ignore --updateref for symbolic references
reflog: improve and update documentation
struct ref_lock: delete the force_write member
lock_ref_sha1_basic(): do not set force_write for missing references
write_ref_sha1(): move write elision test to callers
write_ref_sha1(): remove check for lock == NULL
A corrupt input to "git diff -M" can cause us to segfault.
* jk/diffcore-rename-duplicate:
diffcore-rename: avoid processing duplicate destinations
diffcore-rename: split locate_rename_dst into two functions
Move the variables related to the client-supplied hostname into its own
struct, let execute() own an instance of that instead of storing the
information in global variables and pass the struct to any function that
needs to access it as a parameter.
The lifetime of the variables is easier to see this way. Allocated
memory is released within execute(). The strbufs don't have to be reset
anymore because they are written to only once at most: parse_host_arg()
is only called once by execute() and lookup_hostname() guards against
being called twice using hostname_lookup_done.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert hostname, canon_hostname, ip_address and tcp_port to strbuf.
This allows to get rid of the helpers strbuf_addstr_or_null() and STRARG
because a strbuf always represents a valid (initially empty) string.
sanitize_client() is not needed anymore and sanitize_client_strbuf()
takes its place and name.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support the case where .git is a platform independent symbolic link
and not a directory. This occurs when --separate-git-dir is used when
creating the local repository to store the .git directory elsewhere.
git-gui does not support such repositories when using the repository
chooser as the test to determine that the chosen directory is a git
repository fails for such repositories.
This commit enables _is_git to read the real location from the
symbolic link file.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Remi Rampin <remirampin@gmail.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
'git -C ""' unhelpfully dies with error "Cannot change to ''",
whereas the shell treats `cd ""' as a no-op. Taking the shell's
behavior as a precedent, teach git to treat `-C ""' as a no-op, as
well.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The borrowed code in kwset API did not follow our usual convention
to use "unsigned char" to store values that range from 0-255.
* bw/kwset-use-unsigned:
kwset: use unsigned char to store values with high-bit set
The interaction between "git submodule update" and the
submodule.*.update configuration was not clearly documented.
* ms/submodule-update-config-doc:
submodule: improve documentation of update subcommand
The prompt string "remove?" used when "git clean -i" asks the user
if a path should be removed was localizable, but the code always
expects a substring of "yes" to tell it to go ahead. Always show
[y/N] as part of this prompt to hint that the answer is not (yet)
localized.
* ja/clean-confirm-i18n:
Add hint interactive cleaning
"git diff --shortstat --dirstat=changes" showed a dirstat based on
lines that was never asked by the end user in addition to the
dirstat that the user asked for.
* mk/diff-shortstat-dirstat-fix:
diff --shortstat --dirstat: remove duplicate output
"git remote add" mentioned "--tags" and "--no-tags" and was not
clear that fetch from the remote in the future will use the default
behaviour when neither is given to override it.
* mg/doc-remote-tags-or-not:
git-remote.txt: describe behavior without --tags and --no-tags
Description given by "grep -h" for its --exclude-standard option
was phrased poorly.
* nd/grep-exclude-standard-help-fix:
grep: correct help string for --exclude-standard
Code cleanups.
* rs/simple-cleanups:
sha1_name: use strlcpy() to copy strings
pretty: use starts_with() to check for a prefix
for-each-ref: use skip_prefix() to avoid duplicate string comparison
connect: use strcmp() for string comparison
The configuration variable 'mailinfo.scissors' was hard to
discover in the documentation.
* mm/am-c-doc:
Documentation/git-am.txt: mention mailinfo.scissors config variable
Documentation/config.txt: document mailinfo.scissors
Correct a breakage to git-svn around v2.2 era that triggers
premature closing of FileHandle.
* ew/svn-maint-fixes:
Git::SVN::*: avoid premature FileHandle closure
git-svn: fix localtime=true on non-glibc environments
Even though we officially haven't dropped Perl 5.8 support, the
Getopt::Long package that came with it does not support "--no-"
prefix to negate a boolean option; manually add support to help
people with older Getopt::Long package.
* km/send-email-getopt-long-workarounds:
git-send-email.perl: support no- prefix with older GetOptions
The __git_remotes() helper function lists the remotes from the config
file by processing the output of a 'git config' query. A simple 'git
remote' produces the exact same output, so run that instead.
Remotes under '$GIT_DIR/remotes' are still listed by running 'ls -1',
because 'git remote' unfortunately ignores them.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test checks that both remotes under '$GIT_DIR/remotes' and remotes
in the config file are listed.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
97f05f43 (Show number of TODO items for interactive rebase, 2014-12-10)
taught rebase-interactive to display an item count in the instruction
list comments:
# Rebase 46640c6..5568fd5 onto 46640c6 (4 TODO item(s))
#
# Commands:
# p, pick = use commit
# ...
However, with the exception of the --edit-todo option, "TODO" is a
one-off term, never presented to the user by rebase-interactive in
any other context. The item count is in fact the number of commands
("pick", "edit", etc.) remaining on the instruction sheet, and the
comment immediately following it talks about "Commands". Consequently,
replace "(# TODO item(s))" with the more accurate and meaningful
"(# command(s))".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
97f05f43 (Show number of TODO items for interactive rebase, 2014-12-10)
taught rebase-interactive to compute an item count with 'wc -l' and
display it in the instruction list comments:
# Rebase 46640c6..5568fd5 onto 46640c6 (4 TODO item(s))
On Mac OS X, however, it renders as:
# Rebase 46640c6..5568fd5 onto 46640c6 ( 4 TODO item(s))
since 'wc -l' indents its output with leading spaces. Fix this.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'was_alias' variable does not need to store it's value on each
iteration in the loop; this variable gets assigned the result
of run_argv() every time in the loop before being used.
'done_help' variable does not need to be static variable too if
we move it out the loop.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" carefully names a detached HEAD "at" resp. "from" a rev or
ref depending on whether the detached HEAD has moved since. "git branch"
always uses "from", which can be confusing, because a status-aware user
would interpret this as moved detached HEAD.
Make "git branch" use the same logic and wording.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
wt_status_print() is the only caller of wt_status_get_detached_from().
The latter performs most of the analysis of a detached HEAD, including
finding state->detached_from; the caller checks whether the detached
HEAD is still at state->detached_from or has moved away.
Move that last bit of analysis to wt_status_get_detached_from(), too,
and store the boolean result in state->detached_at.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sequencer calls "commit" with default options, which implies
"--cleanup=default" unless the user specified something else in their
config. This leads to cherry-picked commits getting a cleaned up commit
message, which is usually not an intended side-effect.
Make the sequencer use "--cleanup=verbatim" so that it preserves commit
messages independent of the default, unless the user has set config for "commit"
or the message is amended with -s or -x.
Reported-by: Christoph Anton Mitterer <calestyo@scientia.net>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git commit and git status in long format show the diff between HEAD
and the index when given -v. This allows previewing a commit to be made.
They also list tracked files with unstaged changes, but without a diff.
Introduce '-v -v' which shows the diff between the index and the
worktree in addition to the HEAD index diff. This allows a review of unstaged
changes which might be missing from the commit.
In the case of '-v -v', additonal header lines
Changes to be committed:
and
Changes not staged for commit:
are inserted before the diffs, which are equal to those in the status
part; the latter preceded by 50*"-" to make it stick out more.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"status -v" had no test. Include one.
This also requires changing the .gitignore subtests, which is a good thing:
they include testing a .gitignore pattern now.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These files are used to observe the behaviour of the 'status'
command and if there weren't any such observer, the expected
output from 'status' wouldn't even mention them.
Place them in .gitignore to unclutter the output expected by the
tests. An added benefit is that future tests can add such files
that are purely for use by the observer, i.e. the tests themselves,
by naming them as expect-foo and/or output-bar.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clear the git_zstream variable at the start of git_deflate_init() etc.
so that callers don't have to do that.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set the text flag for ZIP archive entries that look like text files so
that unzip -a can be used to perform end-of-line conversions. Info-ZIP
zip does the same.
Detect binary files the same way as git diff and git grep do, namely by
checking for the attribute "diff" and its negation "-diff", and if none
is found by falling back to checking for the presence of NUL bytes in
the first few bytes of the file contents.
7-Zip, Windows' built-in ZIP functionality and Info-ZIP unzip without
the switch -a are not affected by the change and still extract text
files without doing any end-of-line conversions.
NB: The actual end-of-line style used in the archive entries doesn't
matter to unzip -a, as it converts any CR, CRLF and LF to the line end
characters appropriate for the platform it is running on.
Suggested-by: Ulrike Fischer <luatex@nililand.de>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"update-index --refresh" used to leak when an entry cannot be
refreshed for whatever reason.
* sb/plug-leak-in-make-cache-entry:
read-cache.c: free cache entry when refreshing fails
"git fast-import" used to crash when it could not close and
conclude the resulting packfile cleanly.
* jk/fast-import-die-nicely-fix:
fast-import: avoid running end_packfile recursively
In v2.2.0, we broke "git prune" that runs in a repository that
borrows from an alternate object store.
* jk/prune-mtime:
sha1_file: fix iterating loose alternate objects
for_each_loose_file_in_objdir: take an optional strbuf path
Certain older vintages of cURL give irregular output from
"curl-config --vernum", which confused our build system.
* tc/curl-vernum-output-broken-in-7.11:
Makefile: handle broken curl version number in version check
An earlier workaround to squelch unhelpful deprecation warnings
from the complier on Mac OSX unnecessarily set minimum required
version of the OS, which the user might want to raise (or lower)
for other reasons.
* es/squelch-openssl-warnings-on-macosx:
git-compat-util: do not step on MAC_OS_X_VERSION_MIN_REQUIRED
Longstanding configuration variable naming rules has been added to
the documentation.
* jc/conf-var-doc:
CodingGuidelines: describe naming rules for configuration variables
config.txt: mark deprecated variables more prominently
config.txt: clarify that add.ignore-errors is deprecated
The credential helper for Windows (in contrib/) used to mishandle
a user name with an at-sign in it.
* av/wincred-with-at-in-username-fix:
wincred: fix get credential if username has "@"
Older GnuPG implementations may not correctly import the keyring
material we prepare for the tests to use.
* ch/new-gpg-drops-rfc-1991:
t/lib-gpg: sanity-check that we can actually sign
t/lib-gpg: include separate public keys in keyring.gpg
Clarify in the documentation that "remote.<nick>.pushURL" and
"remote.<nick>.URL" are there to name the same repository accessed
via different transports, not two separate repositories.
* jc/remote-set-url-doc:
Documentation/git-remote.txt: stress that set-url is not for triangular
Reading configuration from a blob object, when it ends with a lone
CR, use to confuse the configuration parser.
* jk/config-no-ungetc-eof:
config_buf_ungetc: warn when pushing back a random character
config: do not ungetc EOF
We didn't format an integer that wouldn't fit in "int" but in
"uintmax_t" correctly.
* jk/decimal-width-for-uintmax:
decimal_width: avoid integer overflow
"git push --signed" gave an incorrectly worded error message when
the other side did not support the capability.
* jc/push-cert:
transport-helper: fix typo in error message when --signed is not supported
"git fetch" over a remote-helper that cannot respond to "list"
command could not fetch from a symbolic reference e.g. HEAD.
* mh/deref-symref-over-helper-transport:
transport-helper: do not request symbolic refs to remote helpers
The insn sheet "git rebase -i" creates did not fully honor
core.abbrev settings.
* ks/rebase-i-abbrev:
rebase -i: use full object name internally throughout the script
The tests that wanted to see that file becomes unreadable after
running "chmod a-r file", and the tests that wanted to make sure it
is not run as root, we used "can we write into the / directory?" as
a cheap substitute, but on some platforms that is not a good
heuristics. The tests and their prerequisites have been updated to
check what they really require.
* jk/sanity:
test-lib.sh: set prerequisite SANITY by testing what we really need
tests: correct misuses of POSIXPERM
t/lib-httpd: switch SANITY check for NOT_ROOT
Correct a breakage to git-svn around v2.2 era that triggers
premature closing of FileHandle.
* ew/svn-maint-fixes:
Git::SVN::*: avoid premature FileHandle closure
git-svn: fix localtime=true on non-glibc environments
We did not parse username followed by literal IPv6 address in SSH
transport URLs, e.g. ssh://user@[2001:db8::1]:22/repo.git
correctly.
* tb/connect-ipv6-parse-fix:
t5500: show user name and host in diag-url
t5601: add more test cases for IPV6
connect.c: allow ssh://user@[2001:db8::1]/repo.git
Test clean-up.
* jc/diff-test-updates:
test_ln_s_add: refresh stat info of fake symbolic links
t4008: modernise style
t/diff-lib: check exact object names in compare_diff_raw
tests: do not borrow from COPYING and README from the real source
t4010: correct expected object names
t9300: correct expected object names
t4008: correct stale comments
Code cleanups.
* rs/simple-cleanups:
sha1_name: use strlcpy() to copy strings
pretty: use starts_with() to check for a prefix
for-each-ref: use skip_prefix() to avoid duplicate string comparison
connect: use strcmp() for string comparison
The configuration variable 'mailinfo.scissors' was hard to
discover in the documentation.
* mm/am-c-doc:
Documentation/git-am.txt: mention mailinfo.scissors config variable
Documentation/config.txt: document mailinfo.scissors
Simplify the ref transaction API around how "the ref should be
pointing at this object" is specified.
* mh/refs-have-new:
refs.h: remove duplication in function docstrings
update_ref(): improve documentation
ref_transaction_verify(): new function to check a reference's value
ref_transaction_delete(): check that old_sha1 is not null_sha1
ref_transaction_create(): check that new_sha1 is valid
commit: avoid race when creating orphan commits
commit: add tests of commit races
ref_transaction_delete(): remove "have_old" parameter
ref_transaction_update(): remove "have_old" parameter
struct ref_update: move "have_old" into "flags"
refs.c: change some "flags" to "unsigned int"
refs: remove the gap in the REF_* constant values
refs: move REF_DELETING to refs.c
Currently, if --updateref is specified and the very last reflog entry
is expired or deleted, the reference's value is set to 0{40}. This is
an invalid state of the repository, and breaks, for example, "git
fsck" and "git for-each-ref".
The only place we use --updateref in our own code is when dropping
stash entries. In that code, the very next step is to check if the
reflog has been made empty, and if so, delete the "refs/stash"
reference entirely. Thus that code path ultimately leaves the
repository in a valid state.
But we don't want to the repository in an invalid state even
temporarily, and we don't want to leave an invalid state if other
callers of "git reflog expire|delete --updateref" don't think to do
the extra cleanup step.
So, if "git reflog expire|delete" leaves no more entries in the
reflog, just leave the reference unchanged.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are expiring reflog entries for a symbolic reference, then how
should --updateref be handled if the newest reflog entry is expired?
Option 1: Update the referred-to reference. (This is what the current
code does.) This doesn't make sense, because the referred-to reference
has its own reflog, which hasn't been rewritten.
Option 2: Update the symbolic reference itself (as in, REF_NODEREF).
This would convert the symbolic reference into a non-symbolic
reference (e.g., detaching HEAD), which is surely not what a user
would expect.
Option 3: Error out. This is plausible, but it would make the
following usage impossible:
git reflog expire ... --updateref --all
Option 4: Ignore --updateref for symbolic references.
We choose to implement option 4.
Note: another problem in this code will be fixed in a moment.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Revamp the "git reflog" usage documentation in the manpage and the
command help to match the current reality and improve its clarity:
* Add documentation for some options that had been left out.
* Group the subcommands and options more logically and move more
common subcommands/options higher.
* Improve some explanations.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a reference is missing, its SHA-1 will be null_sha1, which can't
possibly match a new value that ref_transaction_commit() is trying to
update it to. So there is no need to set force_write in this scenario.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_ref_sha1() previously skipped the write if the reference already
had the desired value, unless lock->force_write was set. Instead,
perform that test at the callers.
Two of the callers (in rename_ref()) unconditionally set force_write
just before calling write_ref_sha1(), so they don't need the extra
check at all. Nor do they need to set force_write anymore.
The last caller, in ref_transaction_commit(), still needs the test.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
None of the callers pass NULL to this function, and there doesn't seem
to be any usefulness to allowing them to do so.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In "git log --decorate", you would see the commit header like this:
commit ... (HEAD, jc/decorate-leaky-separator-color)
where "commit ... (" is painted in color.diff.commit, "HEAD" in
color.decorate.head, ", " in color.diff.commit, the branch name in
color.decorate.branch and then closing ")" in color.diff.commit.
If you wanted to paint the HEAD and local branch name in the same
color as the body text (perhaps because cyan and green are too faint
on a black-on-white terminal to be readable), you would not want to
have to say
[color "decorate"]
head = black
branch = black
because that you would not be able to reuse same configuration on a
white-on-black terminal. You would naively expect
[color "decorate"]
head = normal
branch = normal
to work, but unfortunately it does not. It paints the string "HEAD"
and the branch name in the same color as the opening parenthesis or
comma between the decoration elements. This is because the code
forgets to reset the color after printing the "prefix" in its own
color.
It theoretically is possible that some people were expecting and
relying on that the attribute set as the "diff.commit" color, which
is used to draw these opening parenthesis and inter-item comma, is
inherited by the drawing of branch names, but it is not how the
coloring works everywhere else.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'true' short-hand doesn't deserve a separate sentence; even our own
git config --bool foo.bar yes
would not produce it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of describing it for color.branch.<slot> and have everybody
else refer to it, explain how colors are spelled in "Values" section
upfront.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The various types of values set to the configuration variables
deserve more than a brief footnote mention in the syntax section,
and it will be more so after the later steps of this clean up
effort.
Move the mention of booleans from the syntax section to this new
section, and describe how human-readble integers can be spelled with
scaling there.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A line can be continued via a backquote-LF and can be chomped at a
comment character. But that is not specific to string-typed values.
It is common to all, just like unquoted leading and trailing
whitespaces are stripped and inter-word spacing are retained.
Move the description around and desribe these structural rules
first, then introduce the double-quote facility as a way to override
them, and finally mention various types of values.
Note that these structural rules only apply to the value part of the
configuration file. E.g.
[aSection] \
name \
= value
does not work, because the rules kick in only after seeing "name =".
Both the original and the updated text are phrased in an awkward way
by singling out the "value" part of the line because of this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The syntax section repeats what the preamble explained already.
That a variable can have multiple values is more about what a
variable is than the syntax of the file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Section names and variable names are both case-insensitive, but one
is described as "not case sensitive". Use "case-insensitive" for
both.
Instead of saying "... have to be escaped" without telling what that
escaping achieves, state it in a more positive way, i.e. "... can be
included by escaping".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "interpolated-path" option of "git daemon" inserted any string
client declared on the "host=" capability request without checking.
Sanitize and limit %H and %CH to a saner and a valid DNS name.
* jk/daemon-interpolate:
daemon: sanitize incoming virtual hostname
t5570: test git-daemon's --interpolated-path option
git_connect: let user override virtual-host we send to daemon
"git daemon" looked up the hostname even when "%CH" and "%IP"
interpolations are not requested, which was unnecessary.
* rs/daemon-interpolate:
daemon: use callback to build interpolated path
daemon: look up client-supplied hostname lazily
Even though we officially haven't dropped Perl 5.8 support, the
Getopt::Long package that came with it does not support "--no-"
prefix to negate a boolean option; manually add support to help
people with older Getopt::Long package.
* km/send-email-getopt-long-workarounds:
git-send-email.perl: support no- prefix with older GetOptions
"git apply --whitespace=fix" fixed whitespace errors in the common
context lines but did so without reporting.
* jc/apply-ws-fix-expands-report:
apply: detect and mark whitespace errors in context lines when fixing
"git apply" was not very careful about reading from, removing,
updating and creating paths outside the working tree (under
--index/--cached) or the current directory (when used as a
replacement for GNU patch).
* jc/apply-beyond-symlink:
apply: do not touch a file beyond a symbolic link
apply: do not read from beyond a symbolic link
apply: do not read from the filesystem under --index
apply: reject input that touches outside the working area
A future breakage to "git push" to make it incorrectly pay attention
to pushInsteadOf when it should not will be left uncaught without
this change.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation of 'git submodule update' has several problems:
1) It mentions that value 'none' of submodule.$name.update can be
overridden by --checkout, but other combinations of configuration
values and command line options are not mentioned.
2) The documentation of submodule.$name.update is scattered across three
places, which is confusing.
3) The documentation of submodule.$name.update in gitmodules.txt is
incorrect, because the code always uses the value from .git/config
and never from .gitmodules.
4) Documentation of --force was incomplete, because it is only effective
in case of checkout method of update.
Fix all these problems by documenting submodule.*.update in
git-submodule.txt and make everybody else refer to it.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sun Studio on Solaris issues warnings about improper initialization
values being used when defining tolower_trans_tbl[] in ctype.c. The
array wants to store values with high-bit set and treat them as
values between 128 to 255. Unlike the rest of the Git codebase
where we explicitly specify 'unsigned char' for such variables and
arrays, however, kwset code we borrowed from elsewhere uses 'char'
for this and other variables.
Fix the declarations to explicitly use 'unsigned char' where
necessary to bring it in line with the rest of the Git.
Signed-off-by: Ben Walton <bdwalton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For translators, specify that a [y/N] reply is needed.
Also capitalize the first word in the prompt, as all the other
interactive prompts from this command are capitalized.
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --shortstat is used in conjunction with --dirstat=changes, git diff will
output the dirstat information twice: first as calculated by the 'lines'
algorithm, then as calculated by the 'changes' algorithm:
$ git diff --dirstat=changes,10 --shortstat v2.2.0..v2.2.1
23 files changed, 453 insertions(+), 54 deletions(-)
33.5% Documentation/RelNotes/
26.2% t/
46.6% Documentation/RelNotes/
16.6% t/
The same duplication happens for --shortstat together with --dirstat=files, but
not for --shortstat together with --dirstat=lines.
Limit output to only include one dirstat part, calculated as specified
by the --dirstat parameter. Also, add test for this.
Signed-off-by: Mårten Kongstad <marten.kongstad@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently it's required to hold Shift and scroll up and down to move
horizontally. Listen to Button-6 and Button-7 events too to make
horizontal scrolling handier with touchpads and some mice.
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This makes the "Write commit to file" context menu option generate a
file that is consumable by 'git am'.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The rename code cannot handle an input where we have
duplicate destinations (i.e., more than one diff_filepair in
the queue with the same string in its pair->two->path). We
end up allocating only one slot in the rename_dst mapping.
If we fill in the diff_filepair for that slot, when we
re-queue the results, we may queue that filepair multiple
times. When the diff is finally flushed, the filepair is
processed and free()d multiple times, leading to heap
corruption.
This situation should only happen when a tree diff sees
duplicates in one of the trees (see the added test for a
detailed example). Rather than handle it, the sanest thing
is just to turn off rename detection altogether for the
diff.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function manages the mapping of destination pathnames
to filepairs, and it handles both insertion and lookup. This
makes the return value a bit confusing, as we return a newly
created entry (even though no caller cares), and have no
room to indicate to the caller that an entry already
existed.
Instead, let's break this up into two distinct functions,
both backed by a common binary search. The binary search
will use our normal "return the index if we found something,
or negative index minus one to show where it would have
gone" semantics.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For each object in the input pack, we need one struct object_entry. On
x86-64, this struct is 64 bytes long. Although:
- The 8 bytes for delta_depth and base_object_no are only useful when
show_stat is set. And it's never set unless someone is debugging.
- The three fields hdr_size, type and real_type take 4 bytes each
even though they never use more than 4 bits.
By moving delta_depth and base_object_no out of struct object_entry
and make the other 3 fields one byte long instead of 4, we shrink 25%
of this struct.
On a 3.4M object repo (*) that's about 53MB. The saving is less
impressive compared to index-pack memory use for basic bookkeeping (**),
about 16%.
(*) linux-2.6.git already has 4M objects as of v3.19-rc7 so this is
not an unrealistic number of objects that we have to deal with.
(**) 3.4M * (sizeof(object_entry) + sizeof(delta_entry)) = 311MB
Brought-up-by: Matthew Sporleder <msporleder@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current help string is about --no-exclude-standard. But "git grep -h"
would show --exclude-standard instead. Flip the string. See 0a93fb8
(grep: teach --untracked and --exclude-standard options - 2011-09-27)
for more info about these options.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calling setlocale(LC_MESSAGES, ...) directly from http.c, without
including <locale.h>, was causing compilation warnings. Move the
helper function to gettext.c that already includes the header and
where locale-related issues are handled.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b19138b (git-svn: Make it incrementally faster by minimizing temp
files, v1.6.0), git-svn has been using the Git.pm temp_acquire and
temp_release mechanism to avoid unnecessary temp file churn and provide
a speed boost.
However, that change introduced a call to temp_acquire inside the
Git::SVN::Fetcher::close_file function for an 'svn_hash' temp file.
Because an SVN::Pool is active at the time this function is called, if
the Git::temp_acquire function ends up actually creating a new
FileHandle for the temp file (which it will the first time it's called
with the name 'svn_hash') that FileHandle will end up in the SVN::Pool
and should that pool have SVN::Pool::clear called on it that FileHandle
will be closed out from under Git::temp_acquire.
Since the only call site to Git::temp_acquire with the name 'svn_hash'
is inside the close_file function, if an 'svn_hash' temp file is ever
created its FileHandle is guaranteed to be created in the active
SVN::Pool.
This has not been a problem in the past because the SVN::Pool was not
being cleared. However, since dfa72fdb (git-svn: reload RA every
log-window-size, v2.2.0) the pool has been getting cleared periodically
at which point the FileHandle for the 'svn_hash' temp file gets closed.
Any subsequent calls to Git::temp_acquire for 'svn_hash', however,
succeed without creating/opening a new temporary file since it still has
the now invalid FileHandle in its cache. Callers that then attempt to
use that FileHandle fail with an error.
We avoid this problem by making sure the 'svn_hash' temp file is created
in the same place the 'svn_delta_...' and 'git_blob_...' temp files are
(and then temp_release'd) so that it can be safely used inside the
close_file function without having its FileHandle end up in an SVN::Pool
that gets cleared.
Additionally the Git.pm cat_blob function creates a bidirectional pipe
FileHandle using the IPC::Open2::open2 function. If that handle is
created too late, it also gets caught up in the SVN::Pool and incorrectly
closed by the SVN::Pool::clear call. But this only seems to happen with
more recent versions of Perl and svn.
To avoid this problem we add an explicit call to _open_cat_blob_if_needed
before the first call to SVN::Pool->new_default to make sure the open2
handle does not end up in the SVN::Pool.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git svn uses POSIX::strftime('%s', $sec, $min, ...) to make unix epoch time.
But lowercase %s formatting character is a GNU extention. This causes problem
in git svn fetch --localtime on non-glibc systems, such as msys or cygwin.
Using Time::Local::timelocal($sec, $min, ...) fixes it.
Signed-off-by: Ryuichi Kokubo <ryu1kkb@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Notes:
lowercase %s format character in strftime is a GNU extension and not widely supported.
POSIX::strftime affected by underlying crt's strftime because POSIX::strftime just calls crt's one.
Time::Local is good function to replace POSIX::strftime because it's a perl core module function.
Document about Time::Local.
http://perldoc.perl.org/Time/Local.html
These are specifications of strftime.
The GNU C Library Reference Manual.
http://www.gnu.org/software/libc/manual/html_node/Formatting-Calendar-Time.html
perl POSIX module's strftime document. It does not have '%s'.
http://perldoc.perl.org/POSIX.html
strftime document of Microsort Windows C Run-Time library.
https://msdn.microsoft.com/en-us/library/fe06s4ak.aspx
The Open Group's old specification does not have '%s' too.
http://pubs.opengroup.org/onlinepubs/007908799/xsh/strftime.html
On my environment, following problems happened.
- msys : git svn fetch does not progress at all with perl.exe consuming CPU.
- cygwin : git svn fetch progresses but time stamp information is dropped.
Every commits have unix epoch timestamp.
I would like to thank git developer and contibutors.
git helps me so much everyday.
Thank you.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed in build automation where the tree really needs to
be reset to known state.
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can delay loading some modules until we need them for uncommon
code paths. For example, persistent memoization is not often
needed, so we can avoid loading the modules for it until we
encounter svn::mergeinfo during fetch.
This gives a tiny reduction in syscalls (from 15641 to 15305) when
running "git svn info" and counting via "strace -fc". Further,
more invasive work will be needed to noticeably improve performance.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
"update-index --refresh" used to leak when an entry cannot be
refreshed for whatever reason.
* sb/plug-leak-in-make-cache-entry:
read-cache.c: free cache entry when refreshing fails
The transport-helper did not give transport options such as
verbosity, progress, cloning, etc. to import and export based
helpers, like it did for fetch and push based helpers, robbing them
the chance to honor the wish of the end-users better.
* mh/transport-capabilities:
transport-helper: ask the helper to set the same options for import as for fetch
transport-helper: ask the helper to set progress and verbosity options after asking for its capabilities
"git send-email" used to accept a mistaken "y" (or "yes") as an
answer to "What encoding do you want to use [UTF-8]? " without
questioning. Now it asks for confirmation when the answer looks
too short to be a valid encoding name.
* jc/send-email-sensible-encoding:
send-email: ask confirmation if given encoding name is very short
The tests that wanted to see that file becomes unreadable after
running "chmod a-r file", and the tests that wanted to make sure it
is not run as root, we used "can we write into the / directory?" as
a cheap substitute, but on some platforms that is not a good
heuristics. The tests and their prerequisites have been updated to
check what they really require.
* jk/sanity:
test-lib.sh: set prerequisite SANITY by testing what we really need
tests: correct misuses of POSIXPERM
t/lib-httpd: switch SANITY check for NOT_ROOT
"git fast-import" used to crash when it could not close and
conclude the resulting packfile cleanly.
* jk/fast-import-die-nicely-fix:
fast-import: avoid running end_packfile recursively
Our default I/O size (8 MiB) for large files was too large for some
platforms with smaller SSIZE_MAX, leading to read(2)/write(2)
failures.
* jc/max-io-size-and-ssize-max:
xread/xwrite: clip MAX_IO_SIZE to SSIZE_MAX
We did not check the curl library version before using
CURLOPT_PROXYAUTH feature that may not exist.
* tc/missing-http-proxyauth:
http: support curl < 7.10.7
The strbuf API was explained between the API documentation and in
the header file. Move missing bits to strbuf.h so that programmers
can check only one place for all necessary information.
* jk/strbuf-doc-to-header:
strbuf.h: group documentation for trim functions
strbuf.h: drop boilerplate descriptions of strbuf_split_*
strbuf.h: reorganize api function grouping headers
strbuf.h: format asciidoc code blocks as 4-space indent
strbuf.h: drop asciidoc list formatting from API docs
strbuf.h: unify documentation comments beginnings
strbuf.h: integrate api-strbuf.txt documentation
Optimize attribute look-up, mostly useful in "git grep" on a
project that does not use many attributes, by avoiding it when we
(should) know that the attributes are not defined in the first
place.
* nd/attr-optim:
attr: avoid heavy work when we know the specified attr is not defined
attr: do not attempt to expand when we know it's not a macro
attr.c: rename arg name attr_nr to avoid shadowing the global one
The error handling functions and conventions are now documented in
the API manual.
* jn/doc-api-errors:
doc: document error handling functions and conventions
The interactive "show a list and let the user choose from it"
interface "add -i" used showed and prompted to the user even when
the candidate list was empty, against which the only "choice" the
user could have made was to choose nothing.
* ak/add-i-empty-candidates:
add -i: return from list_and_choose if there is no candidate
"git apply --whitespace=fix" used to under-allocate the memory
when the fix resulted in a longer text than the original patch.
* jc/apply-ws-fix-expands:
apply: count the size of postimage correctly
apply: make update_pre_post_images() sanity check the given postlen
apply.c: typofix
"git log --help" used to show rev-list options that are irrelevant
to the "log" command.
* jc/doc-log-rev-list-options:
Documentation: what does "git log --indexed-objects" even mean?
The error message from "git commit", when a non-existing author
name was given as value to the "--author=" parameter, has been
reworded to avoid misunderstanding.
* mg/commit-author-no-match-malformed-message:
commit: reword --author error message
A broken pack .idx file in the receiving repository prevented the
dumb http transport from fetching a good copy of it from the other
side.
* jk/dumb-http-idx-fetch-fix:
dumb-http: do not pass NULL path to parse_pack_index
The documentation incorrectly said that C(opy) and R(ename) are the
only ones that can be followed by the score number in the output in
the --raw format.
* jc/diff-format-doc:
diff-format doc: a score can follow M for rewrite
Code to read branch name from various files in .git/ directory
would have misbehaved if the code to write them left an empty file.
* jk/status-read-branch-name-fix:
read_and_strip_branch: fix typo'd address-of operator
The "git push" documentation made the "--repo=<there>" option
easily misunderstood.
* mg/push-repo-option-doc:
git-push.txt: document the behavior of --repo
After attempting and failing a password-less authentication
(e.g. kerberos), libcURL refuses to fall back to password based
Basic authentication without a bit of help/encouragement.
* bc/http-fallback-to-password-after-krb-fails:
remote-curl: fall back to Basic auth if Negotiate fails
Setting diff.submodule to 'log' made "git format-patch" produce
broken patches.
* dk/format-patch-ignore-diff-submodule:
format-patch: ignore diff.submodule setting
t4255: test am submodule with diff.submodule
"git rerere" (invoked internally from many mergy operations) did
not correctly signal errors when told to update the working tree
files and failed to do so for whatever reason.
* jn/rerere-fail-on-auto-update-failure:
rerere: error out on autoupdate failure
"git blame HEAD -- missing" failed to correctly say "HEAD" when it
tried to say "No such path 'missing' in HEAD".
* jk/blame-commit-label:
blame.c: fix garbled error message
use xstrdup_or_null to replace ternary conditionals
builtin/commit.c: use xstrdup_or_null instead of envdup
builtin/apply.c: use xstrdup_or_null instead of null_strdup
git-compat-util: add xstrdup_or_null helper
We have a helper function test_ln_s_add that inserts a symbolic link
into the index even if the file system does not support symbolic links.
There is a small flaw in the emulation path: the added entry does not
pick up stat information of the fake symbolic link from the file system,
as a consequence, the index is not exactly the same as for the "regular"
path (where symbolic links are available). To fix this, just call
git update-index again.
This flaw was revealed by the earlier change that tightened
compare_diff_raw(), because a test case in t4008 depends on the
correctly updated index.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 3a0a3a89 ("git-compat-util.h: don't define _XOPEN_SOURCE
on cygwin", 23-11-2014) removed the definition of _XOPEN_SOURCE on
cygwin, the code within a pre-processor conditional further down the
file became redundant. Remove the redundant code.
This effectively reverts commit 41b20017 ("Fix an "implicit function
definition" warning", 03-03-2007).
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Longstanding configuration variable naming rules has been added to
the documentation.
* jc/conf-var-doc:
CodingGuidelines: describe naming rules for configuration variables
config.txt: mark deprecated variables more prominently
config.txt: clarify that add.ignore-errors is deprecated
An earlier workaround to squelch unhelpful deprecation warnings
from the complier on Mac OSX unnecessarily set minimum required
version of the OS, which the user might want to raise (or lower)
for other reasons.
* es/squelch-openssl-warnings-on-macosx:
git-compat-util: do not step on MAC_OS_X_VERSION_MIN_REQUIRED
Certain older vintages of cURL give irregular output from
"curl-config --vernum", which confused our build system.
* tc/curl-vernum-output-broken-in-7.11:
Makefile: handle broken curl version number in version check
In v2.2.0, we broke "git prune" that runs in a repository that
borrows from an alternate object store.
* jk/prune-mtime:
sha1_file: fix iterating loose alternate objects
for_each_loose_file_in_objdir: take an optional strbuf path
The URL for ssh may have include a username before the hostname,
like ssh://user@host/repo.
When literal IPV6 addresses are used together with a username,
the substring "user@[::1]" must be converted into "user@::1".
Make that conversion visible for the user, and write userandhost
in the diagnostics
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test the parsing of literall IPV6 addresses more systematically:
- with and without brackets (e.g. ::1 [::1])
- with brackets and port number: (e.g. [::1]:22)
- with username (e.g. user@::1)
- with username and brackets:
Because user@[::1] was not supported on older Git version,
[user@::1] had to be used as a workaround.
Test that user@::1 user@[::1] and [user@::1] all do the same.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ssh:// syntax was added in 2386d658 (Add first cut at "git
protocol" connect logic., 2005-07-13), it accepted
ssh://user@2001:db8::1/repo.git, which is now legacy.
Over the years the parser was improved to support [] and port numbers,
but the combination of ssh://user@[2001:db8::1]:222/repo.git did
never work.
The only only way to use a user name, a literall IPV6 address and a port
number was ssh://[user@2001:db8::1]:222/repo.git
(Thanks to Christian Taube <lists@hcf.yourweb.de> for reporting this long
standing issue)
New users would use ssh://user@[2001:db8::1]:222/repo.git,
so change the parser to handle it correctly.
Support the old legacy URLs as well, to be backwards compatible,
and avoid regressions for users which upgrade an existing installation
to a later Git version.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use strlcpy() instead of calling strncpy() and then setting the last
byte of the target buffer to NUL explicitly. This shortens and
simplifies the code a bit.
Signed-of-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the code and avoid duplication by using starts_with() instead
of strlen() and strncmp() to check if a line starts with "encoding ".
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use skip_prefix() to get the part after "color:" (if present) and only
compare it with "reset" instead of comparing the whole string again.
This gets rid of the duplicate "color:" part of the string constant.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Get rid of magic string length constants and simply compare the strings
using strcmp(). This makes the intent of the code a bit clearer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was already documented, but the user had to follow the link to
git-mailinfo.txt to find it.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable was documented in git-mailinfo.txt, but not in config.txt.
The detailed documentation is still the one of --scissors in
git-mailinfo.txt, but we give enough information here to let the user
understand what it is about, and to make it easy to find it (e.g.
searching ">8" and "8<" finds it).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push --signed" gave an incorrectly worded error message when
the other side did not support the capability.
* jc/push-cert:
transport-helper: fix typo in error message when --signed is not supported
We didn't format an integer that wouldn't fit in "int" but in
"uintmax_t" correctly.
* jk/decimal-width-for-uintmax:
decimal_width: avoid integer overflow
Reading configuration from a blob object, when it ends with a lone
CR, use to confuse the configuration parser.
* jk/config-no-ungetc-eof:
config_buf_ungetc: warn when pushing back a random character
config: do not ungetc EOF
Clarify in the documentation that "remote.<nick>.pushURL" and
"remote.<nick>.URL" are there to name the same repository accessed
via different transports, not two separate repositories.
* jc/remote-set-url-doc:
Documentation/git-remote.txt: stress that set-url is not for triangular
Older GnuPG implementations may not correctly import the keyring
material we prepare for the tests to use.
* ch/new-gpg-drops-rfc-1991:
t/lib-gpg: sanity-check that we can actually sign
t/lib-gpg: include separate public keys in keyring.gpg
Using environment variable LANGUAGE and friends on the client side,
HTTP-based transports now send Accept-Language when making requests.
* ye/http-accept-language:
http: add Accept-Language header if possible
The credential helper for Windows (in contrib/) used to mishandle
a user name with an at-sign in it.
* av/wincred-with-at-in-username-fix:
wincred: fix get credential if username has "@"
Provide a callback function for strbuf_expand() instead of using the
helper strbuf_expand_dict_cb(). While the resulting code is longer, it
only looks up the canonical hostname and IP address if at least one of
the placeholders %CH and %IP are used with --interpolated-path.
Use a struct for passing the directory to the callback function instead
of passing it directly to avoid having to cast away its const qualifier.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Look up canonical hostname and IP address using getaddrinfo(3) or
gethostbyname(3) only if --interpolated-path or --access-hook were
specified.
Do that by introducing getter functions for canon_hostname and
ip_address and using them for all read accesses. These wrappers call
the new helper lookup_hostname(), which sets the variables only at its
first call.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use the daemon_avoid_alias function to make sure that the
pathname the user gives us is sane. However, after applying
that check, we might then interpolate the path using a
string given by the server admin, but which may contain more
untrusted data from the client. We should be sure to
sanitize this data, as well.
We cannot use daemon_avoid_alias here, as it is more strict
than we need in requiring a leading '/'. At the same time,
we can be much more strict here. We are interpreting a
hostname, which should not contain slashes or excessive runs
of dots, as those things are not allowed in DNS names.
Note that in addition to cleansing the hostname field, we
must check the "canonical hostname" (%CH) as well as the
port (%P), which we take as a raw string. For the canonical
hostname, this comes from an actual DNS lookup on the
accessed IP, which makes it a much less likely vector for
problems. But it does not hurt to sanitize it in the same
way. Unfortunately we cannot test this case easily, as it
would involve a custom hostname lookup.
We do not need to check %IP, as it comes straight from
inet_ntop, so must have a sane form.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We did not test this at all; let's just give a basic sanity
check that we can find a path based on virtual hosting, and
that the downcase canonicalization works.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we connect to a git-daemon at a given host and port, we
actually send the string "localhost:9418" to the other side,
which allows it to do virtual-hosting lookups. For testing
and debugging, we'd like to be able to send arbitrary
strings, rather than the hostname we actually connected to.
Using "insteadOf" config does not work for this purpose, as
the hostname determination happens at a very low level,
right before we feed the hostname to our lookup routines.
You could use /etc/hosts or similar to get around this, but
we cannot do that portably from our test suite.
Instead, this patch provides an environment variable that
can be used to send an arbitrary string.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add more information to the comment introducing the four reference
transaction update functions, so that each function's docstring
doesn't have to repeat it. Add a pointer from the individual
functions' docstrings to the introductory comment.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a docstring for update_ref(), emphasizing its similarity to
ref_transaction_update(). Rename its parameters to match those of
ref_transaction_update().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If NULL is passed to ref_transaction_update()'s new_sha1 parameter,
then just verify old_sha1 (under lock) without trying to change the
new value of the reference.
Use this functionality to add a new function ref_transaction_verify(),
which checks the current value of the reference under lock but doesn't
change it.
Use ref_transaction_verify() in the implementation of "git update-ref
--stdin"'s "verify" command to avoid the awkward need to "update" the
reference to its existing value.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It makes no sense to delete a reference that is already known not to
exist.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Creating a reference requires a new_sha1 that is not NULL and not
null_sha1.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If HEAD doesn't point at anything during the initial check, then we
should make sure that it *still* doesn't point at anything when we are
ready to update the reference. Otherwise, another process might commit
while we are working (e.g., while we are waiting for the user to edit
the commit message) and we will silently overwrite it.
This fixes a failing test in t7516.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Committing involves the following steps:
1. Determine the current value of HEAD (if any).
2. Create the new commit object.
3. Update HEAD.
Please note that step 2 can take arbitrarily long, because it might
involve the user editing a commit message.
If a second process sneaks in a commit during step 2, then the first
commit process should fail. This is usually done correctly, because
step 3 verifies that HEAD still points at the same commit that it
pointed to during step 1.
However, if there is a race when creating an *orphan* commit, then the
test in step 3 is skipped.
Add tests for proper handling of such races. One of the new tests
fails. It will be fixed in a moment.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead, verify the reference's old value if and only if old_sha1 is
non-NULL.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead, verify the reference's old value if and only if old_sha1 is
non-NULL.
ref_transaction_delete() will get the same treatment in a moment.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of having a separate have_old field, record this boolean value
as a bit in the "flags" field.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the following functions' "flags" arguments from "int" to
"unsigned int":
* ref_transaction_update()
* ref_transaction_create()
* ref_transaction_delete()
* update_ref()
* delete_ref()
* lock_ref_sha1_basic()
Also change the "flags" member in "struct ref_update" to unsigned.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will let us manipulate any transport flags which have matching
config options (there are none yet, but we will add one in
the next patch).
We could also just make "flags" a static file-scope global,
but the result is a little confusing. We end up passing it
along through do_push and push_with_options, each of which
further munge it. Having slightly-differing versions of the
flags variable available to those functions would probably
cause more confusion than it is worth. Let's just keep the
original local to cmd_push, and it can continue to pass it
through the call-stack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the code shorter and more obvious by removing an
unnecessary interim variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a memory leak when building the cache entries as
refresh_cache_entry may decide to return NULL, but it does not
free the cache entry structure which was passed in as an argument.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git push" documentation made the "--repo=<there>" option
easily misunderstood.
* mg/push-repo-option-doc:
git-push.txt: document the behavior of --repo
Code to read branch name from various files in .git/ directory
would have misbehaved if the code to write them left an empty file.
* jk/status-read-branch-name-fix:
read_and_strip_branch: fix typo'd address-of operator
The documentation incorrectly said that C(opy) and R(ename) are the
only ones that can be followed by the score number in the output in
the --raw format.
* jc/diff-format-doc:
diff-format doc: a score can follow M for rewrite
A broken pack .idx file in the receiving repository prevented the
dumb http transport from fetching a good copy of it from the other
side.
* jk/dumb-http-idx-fetch-fix:
dumb-http: do not pass NULL path to parse_pack_index
The error message from "git commit", when a non-existing author
name was given as value to the "--author=" parameter, has been
reworded to avoid misunderstanding.
* mg/commit-author-no-match-malformed-message:
commit: reword --author error message
"git log --help" used to show rev-list options that are irrelevant
to the "log" command.
* jc/doc-log-rev-list-options:
Documentation: what does "git log --indexed-objects" even mean?
"git apply --whitespace=fix" used to under-allocate the memory
when the fix resulted in a longer text than the original patch.
* jc/apply-ws-fix-expands:
apply: count the size of postimage correctly
apply: make update_pre_post_images() sanity check the given postlen
apply.c: typofix
The interactive "show a list and let the user choose from it"
interface "add -i" used showed and prompted to the user even when
the candidate list was empty, against which the only "choice" the
user could have made was to choose nothing.
* ak/add-i-empty-candidates:
add -i: return from list_and_choose if there is no candidate
The insn sheet "git rebase -i" creates did not fully honor
core.abbrev settings.
* ks/rebase-i-abbrev:
rebase -i: use full object name internally throughout the script
"git fetch" over a remote-helper that cannot respond to "list"
command could not fetch from a symbolic reference e.g. HEAD.
* mh/deref-symref-over-helper-transport:
transport-helper: do not request symbolic refs to remote helpers
Only Perl version 5.8.0 or later is required, but that comes with
an older Getopt::Long (2.32) that does not support the 'no-'
prefix. Support for that was added in Getopt::Long version 2.33.
Since the help only mentions the 'no-' prefix and not the 'no'
prefix, add explicit support for the 'no-' prefix to support
older GetOptions versions.
Reported-by: Tom G. Christensen <tgc@statsbiblioteket.dk>
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Tested-by: Tom G. Christensen <tgc@statsbiblioteket.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The push config callback does not expect any incoming data
via the void pointer. And if it did, it would certainly not
be a "struct wt_status". This probably got picked up
accidentally in b945901 (push: heed user.signingkey for
signed pushes, 2014-10-22), which copied the template for
the config callback from builtin/commit.c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
What we wanted out of the SANITY precondition is that the filesystem
behaves sensibly with permission bits settings.
- You should not be able to remove a file in a read-only directory,
- You should not be able to tell if a file in a directory exists if
the directory lacks read or execute permission bits.
We used to cheat by approximating that condition with "is the /
writable?" test and/or "are we running as root?" test. Neither test
is sufficient or appropriate in environments like Cygwin.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update this ancient test script to a more modern style in which the
expected result is prepared inside the body of the test that uses
it. Also, instead of using $tree, a shell variable, throughout the
test script, create a tag that points at it, to make it easier to
manually debug the test script in its trash directory.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "sanitize" helper wanted to strip the similarity and
dissimilarity scores when making comparison, but it was
stripping away the object names as well.
While we do not want to require the exact object names the tests
expect to be maintained, as it would be seen as an extra burden,
this would have prevented us catching a silly bug such as showing
non 0{40} object name on the preimage side of an addition or on the
postimage side of a deletion, because all [0-9a-f]{40} strings were
considered equally OK.
In the longer term, when a test only wants to see the status of the
change without having to worry about object names, it should be
rewritten not to inspect the raw format.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two files have been modified since the tests started using
as test input, making the exact object names they expect to be
different from what actually happens in the trash repository they
use to run tests.
Instead, take a snapshot of these two files and keep them in
t/diff-lib/ so that we can update the real ones without having to
worry about breaking tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output the test expects is bogus.
It was left unnoticed only because compare_diff_raw, which only
cares about the add/delete/rename/copy was used to check the result.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output the test #36 expects is bogus. There are no blob objects
whose names are 36a590... or 046d037... when this test was run.
It was left unnoticed only because compare_diff_raw, which only
cares about the add/delete/rename/copy was used to check the result.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A complete rewrite of a single file was originally designed to be
expressed as a deletion immediately followed by a creation of the
same file, and the comments in the test updated here were written to
reflect that design decision made in f345b0a0 (Add -B flag to diff-*
brothers., 2005-05-30). However, we later realized that a complete
rewrite is merely how a textual diff should be represented at
366175ef (Rework -B output., 2005-06-19), and updated the actual
tests. But we forgot to update the introductory text while doing
so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
41 bytes is the exact number of bytes needed for having the returned
hex string represented. 50 seems to be an arbitrary number, such
that there are no benefits from alignment to certain address boundaries.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few files include the same header file directly more than once.
As all these headers protect themselves against repeated inclusion
by the "#ifndef FOO_H / #define FOO_H / ... / #endif" idiom, leave
only the first inclusion and remove the later inclusion as a no-op
clean-up.
Signed-off-by: Дилян Палаузов <git-dpa@aegee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes people respond "y<ENTER>" (or "yes<ENTER>") when asked
this question:
Which 8bit encoding should I declare [UTF-8]?
We already have a mechanism to avoid accepting a mistyped e-mail
address (we ask to confirm when the given address lacks "@" in it);
reuse it to trigger the same confirmation when given a very short
answer. As a typical charset name is probably at least 4 chars or
longer (e.g. "UTF8" spelled without the dash, or "Big5"), this would
prevent such a mistake.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A remote helper is currently only told about the 'check-connectivity',
'cloning', and 'update-shallow' options when it supports the 'fetch'
command, but not when it supports 'import' instead.
This is especially important for the 'cloning' option, because it
means a remote helper that only supports 'import' can't distinguish
between a clone and a pull besides doing some assumptions from the
git directory state.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, a remote helper is only told about the progress and verbosity
options for the 'fetch' and 'push' commands. This means a remote helper
that implements 'import' and 'export' can never know the user requested
progress or verbosity (or lack thereof) through the command line.
Telling the remote helper about those options after asking for its
capabilities ensures it can act accordingly for all commands.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no reason to "reserve" a gap between the public and private
flags values.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is only used internally now. Document it a little bit better, too.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 0b6806b9 (xread, xwrite: limit size of IO to 8MB, 2013-08-20),
we chomp our calls to read(2) and write(2) into chunks of
MAX_IO_SIZE bytes (8 MiB), because a large IO results in a bad
latency when the program needs to be killed. This also brought our
IO below SSIZE_MAX, which is a limit POSIX allows read(2) and
write(2) to fail when the IO size exceeds it, for OS X, where a
problem was originally reported.
However, there are other systems that define SSIZE_MAX smaller than
our default, and feeding 8 MiB to underlying read(2)/write(2) would
fail. Make sure we clip our calls to the lower limit as well.
Reported-by: Joachim Schmitz <jojo@schmitz-digital.de>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark file-local symbols as "static", and drop functions that nobody
uses.
* jc/unused-symbols:
shallow.c: make check_shallow_file_for_update() static
remote.c: make clear_cas_option() static
urlmatch.c: make match_urls() static
revision.c: make save_parents() and free_saved_parents() static
line-log.c: make line_log_data_init() static
pack-bitmap.c: make pack_bitmap_filename() static
prompt.c: remove git_getpass() nobody uses
http.c: make finish_active_slot() and handle_curl_result() static
Extending the js/push-to-deploy topic, the behaviour of "git push"
when updating the working tree and the index with an update to the
branch that is checked out can be tweaked by push-to-checkout hook.
* jc/push-to-checkout:
receive-pack: support push-to-checkout hook
receive-pack: refactor updateInstead codepath
"git push" has been taught a "--atomic" option that makes push to
update more than one ref an "all-or-none" affair.
* sb/atomic-push:
Document receive.advertiseatomic
t5543-atomic-push.sh: add basic tests for atomic pushes
push.c: add an --atomic argument
send-pack.c: add --atomic command line argument
send-pack: rename ref_update_to_be_sent to check_to_send_update
receive-pack.c: negotiate atomic push support
receive-pack.c: add execute_commands_atomic function
receive-pack.c: move transaction handling in a central place
receive-pack.c: move iterating over all commands outside execute_commands
receive-pack.c: die instead of error in case of possible future bug
receive-pack.c: shorten the execute_commands loop over all commands
Restructure "reflog expire" to fit the reflogs better with the
recently updated ref API.
Looked reasonable (except that some shortlog entries stood out like
a sore thumb).
* mh/reflog-expire: (24 commits)
refs.c: let fprintf handle the formatting
refs.c: don't expose the internal struct ref_lock in the header file
lock_any_ref_for_update(): inline function
refs.c: remove unlock_ref/close_ref/commit_ref from the refs api
reflog_expire(): new function in the reference API
expire_reflog(): treat the policy callback data as opaque
Move newlog and last_kept_sha1 to "struct expire_reflog_cb"
expire_reflog(): move rewrite to flags argument
expire_reflog(): move verbose to flags argument
expire_reflog(): pass flags through to expire_reflog_ent()
struct expire_reflog_cb: a new callback data type
Rename expire_reflog_cb to expire_reflog_policy_cb
expire_reflog(): move updateref to flags argument
expire_reflog(): move dry_run to flags argument
expire_reflog(): add a "flags" argument
expire_reflog(): extract two policy-related functions
Extract function should_expire_reflog_ent()
expire_reflog(): use a lock_file for rewriting the reflog file
expire_reflog(): return early if the reference has no reflog
expire_reflog(): rename "ref" parameter to "refname"
...
"git log --invert-grep --grep=WIP" will show only commits that do
not have the string "WIP" in their messages.
* cj/log-invert-grep:
log: teach --invert-grep option
After attempting and failing a password-less authentication
(e.g. kerberos), libcURL refuses to fall back to password based
Basic authentication without a bit of help/encouragement.
* bc/http-fallback-to-password-after-krb-fails:
remote-curl: fall back to Basic auth if Negotiate fails
Setting diff.submodule to 'log' made "git format-patch" produce
broken patches.
* dk/format-patch-ignore-diff-submodule:
format-patch: ignore diff.submodule setting
t4255: test am submodule with diff.submodule
"git rerere" (invoked internally from many mergy operations) did
not correctly signal errors when told to update the working tree
files and failed to do so for whatever reason.
* jn/rerere-fail-on-auto-update-failure:
rerere: error out on autoupdate failure
"git blame HEAD -- missing" failed to correctly say "HEAD" when it
tried to say "No such path 'missing' in HEAD".
* jk/blame-commit-label:
blame.c: fix garbled error message
use xstrdup_or_null to replace ternary conditionals
builtin/commit.c: use xstrdup_or_null instead of envdup
builtin/apply.c: use xstrdup_or_null instead of null_strdup
git-compat-util: add xstrdup_or_null helper
The clone subcommand has long had support for excluding
subdirectories, but sync has not. This is a nuisance,
since as soon as you do a sync, any changed files that
were initially excluded start showing up.
Move the "exclude" command-line option into the parent
class; the actual behavior was already present there so
it simply had to be exposed.
Signed-off-by: Luke Diamand <luke@diamand.org>
Reviewed-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
run_setup_gently() is called before merge-file. This may result in changing
current working directory, which wasn't taken into account when opening a file
for writing.
Fix by prepending the passed prefix. Previous var is left so that error
messages keep referring to the file from the user's working directory
perspective.
Signed-off-by: Aleksander Boruch-Gruszecki <aleksander.boruchgruszecki@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because Git tracks symbolic links as symbolic links, a path that
has a symbolic link in its leading part (e.g. path/to/dir/file,
where path/to/dir is a symbolic link to somewhere else, be it
inside or outside the working tree) can never appear in a patch
that validly applies, unless the same patch first removes the
symbolic link to allow a directory to be created there.
Detect and reject such a patch.
Things to note:
- Unfortunately, we cannot reuse the has_symlink_leading_path()
from dir.c, as that is only about the working tree, but "git
apply" can be told to apply the patch only to the index or to
both the index and to the working tree.
- We cannot directly use has_symlink_leading_path() even when we
are applying only to the working tree, as an early patch of a
valid input may remove a symbolic link path/to/dir and then a
later patch of the input may create a path path/to/dir/file, but
"git apply" first checks the input without touching either the
index or the working tree. The leading symbolic link check must
be done on the interim result we compute in-core (i.e. after the
first patch, there is no path/to/dir symbolic link and it is
perfectly valid to create path/to/dir/file).
Similarly, when an input creates a symbolic link path/to/dir and
then creates a file path/to/dir/file, we need to flag it as an
error without actually creating path/to/dir symbolic link in the
filesystem.
Instead, for any patch in the input that leaves a path (i.e. a non
deletion) in the result, we check all leading paths against the
resulting tree that the patch would create by inspecting all the
patches in the input and then the target of patch application
(either the index or the working tree).
This way, we catch a mischief or a mistake to add a symbolic link
path/to/dir and a file path/to/dir/file at the same time, while
allowing a valid patch that removes a symbolic link path/to/dir and
then adds a file path/to/dir/file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We should reject a patch, whether it renames/copies dir/file to
elsewhere with or without modificiation, or updates dir/file in
place, if "dir/" part is actually a symbolic link to elsewhere,
by making sure that the code to read the preimage does not read
from a path that is beyond a symbolic link.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently read the preimage to apply a patch from the index only
when the --cached option is given. Do so also when the command is
running under the --index option. With --index, the index entry and
the working tree file for a path that is involved in a patch must be
identical, so this should not affect the result, but by reading from
the index, we will get the protection to avoid reading an unintended
path beyond a symbolic link automatically.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, a patch that affects outside the working area (either a
Git controlled working tree, or the current working directory when
"git apply" is used as a replacement of GNU patch) is rejected as a
mistake (or a mischief). Git itself does not create such a patch,
unless the user bends over backwards and specifies a non-standard
prefix to "git diff" and friends.
When `git apply` is used as a "better GNU patch", the user can pass
the `--unsafe-paths` option to override this safety check. This
option has no effect when `--index` or `--cached` is in use.
The new test was stolen from Jeff King with slight enhancements.
Note that a few new tests for touching outside the working area by
following a symbolic link are still expected to fail at this step,
but will be fixed in later steps.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an import has finished, we run end_packfile() to
finalize the data and move the packfile into place. If this
process fails, we call die() and end up in our die_nicely()
handler. Which unfortunately includes running end_packfile
to save any progress we made. We enter the function again,
and start operating on the pack_data struct while it is in
an inconsistent state, leading to a segfault.
One way to trigger this is to simply start two identical
fast-imports at the same time. They will both create the
same packfiles, which will then try to create identically
named ".keep" files. One will win the race, and the other
will die(), and end up with the segfault.
Since 3c078b9, we already reset the pack_data pointer to
NULL at the end of end_packfile. That covers the case of us
calling die() right after end_packfile, before we have
reinitialized the pack_data pointer. This new problem is
quite similar, except that we are worried about calling
die() _during_ end_packfile, not right after. Ideally we
would simply set pack_data to NULL as soon as we enter the
function, and operate on a copy of the pointer.
Unfortunately, it is not so easy. pack_data is a global, and
end_packfile calls into other functions which operate on the
global directly. We would have to teach each of these to
take an argument, and there is no guarantee that we would
catch all of the spots.
Instead, we can simply use a static flag to avoid
recursively entering the function. This is a little less
elegant, but it's short and fool-proof.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since ea02ffa3 (mailmap: simplify map_user() interface, 2013-01-05),
find_alignment() has been invoking commit_info_destroy() on an
uninitialized auto 'struct commit_info' (when METAINFO_SHOWN is not
set). commit_info_destroy() calls strbuf_release() for each
'commit_info' strbuf member, which randomly invokes free() on
whatever random stack value happens to reside in strbuf.buf, thus
leading to periodic crashes.
Reported-by: Dilyan Palauzov <dilyan.palauzov@aegee.org>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/atomic-push:
Document receive.advertiseatomic
t5543-atomic-push.sh: add basic tests for atomic pushes
push.c: add an --atomic argument
send-pack.c: add --atomic command line argument
send-pack: rename ref_update_to_be_sent to check_to_send_update
receive-pack.c: negotiate atomic push support
receive-pack.c: add execute_commands_atomic function
receive-pack.c: move transaction handling in a central place
receive-pack.c: move iterating over all commands outside execute_commands
receive-pack.c: die instead of error in case of possible future bug
receive-pack.c: shorten the execute_commands loop over all commands
* mh/reflog-expire: (24 commits)
refs.c: let fprintf handle the formatting
refs.c: don't expose the internal struct ref_lock in the header file
lock_any_ref_for_update(): inline function
refs.c: remove unlock_ref/close_ref/commit_ref from the refs api
reflog_expire(): new function in the reference API
expire_reflog(): treat the policy callback data as opaque
Move newlog and last_kept_sha1 to "struct expire_reflog_cb"
expire_reflog(): move rewrite to flags argument
expire_reflog(): move verbose to flags argument
expire_reflog(): pass flags through to expire_reflog_ent()
struct expire_reflog_cb: a new callback data type
Rename expire_reflog_cb to expire_reflog_policy_cb
expire_reflog(): move updateref to flags argument
expire_reflog(): move dry_run to flags argument
expire_reflog(): add a "flags" argument
expire_reflog(): extract two policy-related functions
Extract function should_expire_reflog_ent()
expire_reflog(): use a lock_file for rewriting the reflog file
expire_reflog(): return early if the reference has no reflog
expire_reflog(): rename "ref" parameter to "refname"
...
The string in 'base' contains a path suffix to a specific object;
when its value is used, the suffix must either be filled (as in
stat_sha1_file, open_sha1_file, check_and_freshen_nonlocal) or
cleared (as in prepare_packed_git) to avoid junk at the end.
660c889e (sha1_file: add for_each iterators for loose and packed
objects, 2014-10-15) introduced loose_from_alt_odb(), but this did
neither and treated 'base' as a complete path to the "base" object
directory, instead of a pointer to the "base" of the full path
string.
The trailing path after 'base' is still initialized to NUL, hiding
the bug in some common cases. Additionally the descendent
for_each_file_in_obj_subdir() function swallows ENOENT, so an error
only shows if the alternate's path was last filled with a valid
object (where statting /path/to/existing/00/0bjectfile/00 fails).
Signed-off-by: Jonathon Mah <me@JonathonMah.com>
Helped-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We feed a root "objdir" path to this iterator function,
which then copies the result into a strbuf, so that it can
repeatedly append the object sub-directories to it. Let's
make it easy for callers to just pass us a strbuf in the
first place.
We leave the original interface as a convenience for callers
who want to just pass a const string like the result of
get_object_directory().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MAC_OS_X_VERSION_MIN_REQUIRED may be defined by the builder to a
specific version in order to produce compatible binaries for a
particular system. Blindly defining it to MAC_OS_X_VERSION_10_6
is bad.
Additionally MAC_OS_X_VERSION_10_6 will not be defined on older
systems and should AvailabilityMacros.h be included on such as
system an error will result. However, using the explicit value
of 1060 (which is what MAC_OS_X_VERSION_10_6 is defined to) does
not solve the problem.
The changes that introduced stepping on MAC_OS_X_VERSION_MIN were
made in b195aa00 (git-compat-util: suppress unavoidable
Apple-specific deprecation warnings) to avoid deprecation
warnings.
Instead of blindly setting MAC_OS_X_VERSION_MIN to 1060 change
the definition of DEPRECATED_ATTRIBUTE to empty to avoid the
warnings. This preserves any MAC_OS_X_VERSION_MIN_REQUIRED
setting while avoiding the warnings as intended by b195aa00.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our config code simulates a stdio stream around a buffer,
but our fake ungetc() does not behave quite like the real
one. In particular, we only rewind the position by one
character, but do _not_ actually put the character from the
caller into position.
It turns out that this does not matter, because we only ever
push back the character we just read. In other words, such
an assignment would be a noop. But because the function is
called ungetc, and because it takes a character parameter,
it is a mistake waiting to happen.
Actually assigning the character into the buffer would be
ideal, but our pointer is actually a "const" copy of the
buffer. We do not know who the real owner of the buffer is
in this code, and would not want to munge their contents.
Instead, we can simply add an assertion that matches what
the current caller does, and will let us know if new callers
are added that violate the contract.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The decimal_width function originally appeared in blame.c as
"lineno_width", and was designed for calculating the
print-width of small-ish integer values (line numbers in
text files). In ec7ff5b, it was made into a reusable
function, and in dc801e7, we started using it to align
diffstats.
Binary files in a diffstat show byte counts rather than line
numbers, meaning they can be quite large (e.g., consider
adding or removing a 2GB file). decimal_width is not up to
the challenge for two reasons:
1. It takes the value as an "int", whereas large files may
easily surpass this. The value may be truncated, in
which case we will produce an incorrect value.
2. It counts "up" by repeatedly multiplying another
integer by 10 until it surpasses the value. This can
cause an infinite loop when the value is close to the
largest representable integer.
For example, consider using a 32-bit signed integer,
and a value of 2,140,000,000 (just shy of 2^31-1).
We will count up and eventually see that 1,000,000,000
is smaller than our value. The next step would be to
multiply by 10 and see that 10,000,000,000 is too
large, ending the loop. But we can't represent that
value, and we have signed overflow.
This is technically undefined behavior, but a common
behavior is to lose the high bits, in which case our
iterator will certainly be less than the number. So
we'll keep multiplying, overflow again, and so on.
This patch changes the argument to a uintmax_t (the same
type we use to store the diffstat information for binary
filese), and counts "down" by repeatedly dividing our value
by 10.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are parsing a config value, if we see a carriage
return, we fgetc the next character to see if it is a
line feed (in which case we silently drop the CR). If it
isn't, we then ungetc the character, and take the literal
CR.
But we never check whether we in fact got a character at
all. If the config file ends in CR, we will get EOF here,
and try to ungetc EOF. This works OK for a real stdio
stream. The ungetc returns an error, and the next fgetc will
then return EOF again.
However, our custom buffer-based stream is not so fortunate.
It happily rewinds the position of the stream by one
character, ignoring the fact that we fed it EOF. The next
fgetc call returns the final CR again, over and over, and we
end up in an infinite loop.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, the builtin executable names are suffixed with $X.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the need to have duplicated "if there is a change then feed
null_sha1 and otherwise sha1 from the cache entry" for the "new"
side of the diff by introducing two temporary variables to point
at the object name of the old and the new side of the blobs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __builtin_ctzll function was added in gcc 3.4.0.
This extends the check for gcc so that use of __builtin_ctzll is only
enabled if gcc >= 3.4.0.
Signed-off-by: Tom G. Christensen <tgc@statsbiblioteket.dk>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
curl 7.11.0 through 7.12.2 when built from their official release
archives will present a 5 digit version number instead of the documented
6 digits which breaks the version check in the Makefile.
Correct these broken version numbers on the fly when extracting them to
ensure the comparison works correctly.
[jc: shortened the new sed scripts a bit]
Signed-off-by: Tom G. Christensen <tgc@statsbiblioteket.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dd61399 introduced support for http proxies that require
authentication but it relies on the CURL_PROXYAUTH option which was
added in curl 7.10.7.
This makes sure proxy authentication is only enabled if libcurl can
support it.
Signed-off-by: Tom G. Christensen <tgc@statsbiblioteket.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we add a new submodule the path of the submodule is being
normalized. We fail to normalize multiple adjacent '/./', though.
Thus 'path/to/././submodule' will become 'path/to/./submodule' where
it should be 'path/to/submodule' instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We may want to say something about command line option names in the
new section as well, but for now, let's make sure everybody is clear
on how to structure and name their configuration variables.
The text for the rules are partly taken from the log message of
Jonathan's 6b3020a2 (add: introduce add.ignoreerrors synonym for
add.ignore-errors, 2010-12-01).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems to be a common mistake to try using a single remote
(e.g. 'origin') to fetch from one place (i.e. upstream) while
pushing to another (i.e. your publishing point).
That will never work satisfactorily, and it is easy to understand
why if you think about what refs/remotes/origin/* would mean in such
a world. It fundamentally cannot reflect the reality. If it
follows the state of your upstream, it cannot match what you have
published, and vice versa.
It may be that misinformation is spread by some people. Let's
counter them by adding a few words to our documentation.
- The description was referring to <oldurl> and <newurl>, but never
mentioned <name> argument you give from the command line. By
mentioning "remote <name>", stress the fact that it is configuring
a single remote.
- Add a reminder that explicitly states that this is about a single
remote, which the triangular workflow is not about.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some older versions of gpg (reportedly v1.2.6 from RHEL4) cannot
import the keyrings found in our test suite, and thus cannot even
make a signature. The previous change works it around, but we
cannot anticipate breakages update to GPG would cause in the future.
Do a test-sign before declaring the GPG prerequisite fulfilled
to future-proof our tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1e3eefb (tests: replace binary GPG keyrings with
ASCII-armored keys, 2014-12-12), we import our test GPG keys
from a single file. Each keypair in the import stream
contains both the secret and public keys. However, older
versions of gpg reportedly fail to import the public half of
the key. We can solve this by including duplicates of the
public keys separately. The duplicates are ignored by modern
gpg, and this makes older versions work.
Reported by Tom G. Christensen <tgc@statsbiblioteket.dk> on
gpg 1.2.6 (from RHEL4).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b6d8f309 (diff-raw format update take #2., 2005-05-23) started
documenting the diff format, and it said
...
(8) sha1 for "dst"; 0{40} if creation, unmerged or "look at work tree".
(9) status, followed by similarlity index number only for C and R.
(10) a tab or a NUL when '-z' option is used.
...
because C and R _were_ the only ones that came with a number back
then. This was corrected by ddafa7e9 (diff-helper: Fix R/C score
parsing under -z flag., 2005-05-29) and we started saying "score"
instead of "similarlity index" (because we can have other kind of
score there), and stopped saying "only for C and R" (because Git is
an ever evolving system). Later f345b0a0 (Add -B flag to diff-*
brothers., 2005-05-30) introduced a new concept, "dissimilarity"
score; it did not have to fix any documentation.
The current text that says only C and R can have scores came
independently from a5a323f3 (Add reference for status letters in
documentation., 2008-11-02) and it was wrong from the day one.
Noticed-by: Mike Hommey
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As per the code, the --repo <repo> option is equivalent to the
<repo> argument to 'git push', but somehow it was documented as
something that is more than that. [It exists for historical
reasons, back from the time when options had to come before
arguments.]
Say so. [But not that.]
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no point in checking "!ref->name" when ref is a
"struct ref". The name field is a flex-array, and there
always has a non-zero address. This is almost certainly not
hurting anything, but it does cause clang-3.6 to complain.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are chomping newlines from the end of a strbuf, we
must check "sb.len != 0" before accessing "sb.buf[sb.len - 1]".
However, this code mistakenly checks "&sb.len", which is
always true (it is a part of an auto struct, so the address
is always non-zero). This could lead to us accessing memory
outside the strbuf when we read an empty file.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old text gave an impression that even in a new repository using
old form might be safer. Only Git from pre 1.7.0 days choke on the
correctly named variable, which is ancient by today's standard.
We have no intention to remove the support for deprecated ones, but
let's make sure that we do not give room for confused questions such
as "why does core.sparse-checkout not work, when add.ignore-errors
does?"
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an Accept-Language header which indicates the user's preferred
languages defined by $LANGUAGE, $LC_ALL, $LC_MESSAGES and $LANG.
Examples:
LANGUAGE= -> ""
LANGUAGE=ko:en -> "Accept-Language: ko, en;q=0.9, *;q=0.1"
LANGUAGE=ko LANG=en_US.UTF-8 -> "Accept-Language: ko, *;q=0.1"
LANGUAGE= LANG=en_US.UTF-8 -> "Accept-Language: en-US, *;q=0.1"
This gives git servers a chance to display remote error messages in
the user's preferred language.
Limit the number of languages to 1,000 because q-value must not be
smaller than 0.001, and limit the length of Accept-Language header to
4,000 bytes for some HTTP servers which cannot accept such long header.
Signed-off-by: Yi EungJun <eungjun.yi@navercorp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running t0026 as root 'prune directories with unreadable gitdir' fails.
Skip this test if SANITY is not set (the use of POSIXPERM is wrong here)
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, dumb http always fetched .idx files
directly into their final location, and then checked their
validity with parse_pack_index. This was refactored in
commit 750ef42 (http-fetch: Use temporary files for
pack-*.idx until verified, 2010-04-19), which uses the
following logic:
1. If we have the idx already in place, see if it's
valid (using parse_pack_index). If so, use it.
2. Otherwise, fetch the .idx to a tempfile, check
that, and if so move it into place.
3. Either way, fetch the pack itself if necessary.
However, it got step 1 wrong. We pass a NULL path parameter
to parse_pack_index, so an existing .idx file always looks
broken. Worse, we do not treat this broken .idx as an
opportunity to re-fetch, but instead return an error,
ignoring the pack entirely. This can lead to a dumb-http
fetch failing to retrieve the necessary objects.
This doesn't come up much in practice, because it must be a
packfile that we found out about (and whose .idx we stored)
during an earlier dumb-http fetch, but whose packfile we
_didn't_ fetch. I.e., we did a partial clone of a
repository, didn't need some packfiles, and now a followup
fetch needs them.
Discovery and tests by Charles Bailey <charles@hashpling.org>.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an --author argument is specified but does not contain a '>' then git tries
to find the argument within the existing authors; and gives the error
message "No existing author found with '%s'" if there is no match.
This is confusing for users who try to specify a valid complete author
name.
Rename the error message to make it clearer that the failure has two
reasons in this case.
(This codepath is touched only when we know already that the argument
cannot be a completely wellformed author ident.)
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This message is about leaving orphaned commits behind, not about
behind an upstream branch. Try to make this clear.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
4fe10219 (rev-list: add --indexed-objects option, 2014-10-16) adds
"--indexed-objects" option to "rev-list", and it is only useful in
the context of "git rev-list" and not "git log". There are other
object traversal options that do not make sense for "git log" that
are shown in the manual page.
Move the description of "--indexed-objects" to the object traversal
section so that it sits together with its friends "--objects",
"--objects-edge", etc. and then show them only in "git rev-list"
documentation.
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you use git-p4 with the "--prepare-p4-only" option, then
it prints the p4 command line to use. However, the command
line was incorrect: the changelist specification must be
supplied on standard input, not as an argument to p4.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list_and_choose() helper is given a prompt and a list, asks the
user to make selection from the list, and then returns a list of
items chosen. Even when it is given an empty list as the original
candidate set to choose from, it gave a prompt to the user, who can
only say "I am done choosing".
Return an empty result when the input is an empty list without
bothering the user. The existing caller must already have a logic
to say "Nothing to do" or an equivalent when the returned list is
empty (i.e. the user chose to select nothing) if it is necessary, so
no change to the callers is necessary.
This fixes the case where "add untracked" is asked in "git add -i"
and there is no untracked files in the working tree. We used to give
an empty list of files to choose from with a prompt, but with this
change, we no longer do.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Version numbers in asciidoc-generated content (such as man pages)
went missing as of da8a366 (Documentation: refactor common operations
into variables). Fix by putting the underscore back in the variable
name.
Signed-off-by: Sven van Haastregt <svenvh@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the incoming patch has whitespace errors in a common context
line (i.e. a line that is expected to be found and is not modified
by the patch), "apply --whitespace=fix" corrects the whitespace
errors the line has, in addition to the whitespace error on a line
that is updated by the patch. However, we did not count and report
that we fixed whitespace errors on such lines.
[jc: This is iffy. What if the whitespace error has been fixed in
the target since the patch was written? A common context line we
see in the patch has errors, and it matches a line in the target
that has the errors already corrected, resulting in no change, which
we may not want to count after all. On the other hand, we are
reporting whitespace errors _in_ the incoming patch, so...]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Under --whitespace=fix option, match_fragment() function examines
the preimage (the common context and the removed lines in the patch)
and the file being patched and checks if they match after correcting
all whitespace errors. When they are found to match, the common
context lines in the preimage is replaced with the fixed copy,
because these lines will then be copied to the corresponding place
in the postimage by a later call to update_pre_post_images(). Lines
that are added in the postimage, under --whitespace=fix, have their
whitespace errors already fixed when apply_one_fragment() prepares
the preimage and the postimage, so in the end, application of the
patch can be done by replacing the block of text in the file being
patched that matched the preimage with what is in the postimage that
was updated by update_pre_post_images().
In the earlier days, fixing whitespace errors always resulted in
reduction of size, either collapsing runs of spaces in the indent to
a tab or removing the trailing whitespaces. These days, however,
some whitespace error fix results in extending the size.
250b3c6c (apply --whitespace=fix: avoid running over the postimage
buffer, 2013-03-22) tried to compute the final postimage size but
its math was flawed. It counted the size of the block of text in
the original being patched after fixing the whitespace errors on its
lines that correspond to the preimage. That number does not have
much to do with how big the final postimage would be.
Instead count (1) the added lines in the postimage, whose size is
the same as in the final patch result because their whitespace
errors have already been corrected, and (2) the fixed size of the
lines that are common.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply --whitespace=fix" used to be able to assume that fixing
errors will always reduce the size by e.g. stripping whitespaces at
the end of lines or collapsing runs of spaces into tabs at the
beginning of lines. An update to accomodate fixes that lengthens
the result by e.g. expanding leading tabs into spaces were made long
time ago but the logic miscounted the necessary space after such
whitespace fixes, leading to either under-allocation or over-usage
of already allocated space.
Illustrate this with a runtime sanity-check to protect us from
future breakage. The test was stolen from Kyle McKay who helped
to identify the problem.
Helped-by: "Kyle J. McKay" <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 908a320363 introduced indentation
to here documents in t3301.sh. However in one place <<-EOF was missing
-, which broke this test when run with mksh-50d. This commit fixes it.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In earlier days, the abbreviated commit object name shown to the end
users were generated with hardcoded --abbrev=7; 56895038 (rebase
-i: respect core.abbrev, 2013-09-28) tried to make it honor the user
specified core.abbrev, but it missed the very initial invocation of
the editor.
These days, we try to use the full 40-hex object names internally to
avoid ambiguity that can arise after rebase starts running. Newly
created objects during the rebase may share the same prefix with
existing commits listed in the insn sheet. These object names are
shortened just before invoking the sequence editor to present the
insn sheet to the end user, and then expanded back to full object
names when the editor returns.
But the code still used the shortened names when preparing the insn
sheet for the very first time, resulting "7 hexdigits or more"
output to the user. Change the code to use full 40-hex commit
object names from the very beginning to make things more uniform.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A typical remote helper will return a `list` of refs containing a symbolic
ref HEAD, pointing to, e.g. refs/heads/master. In the case of a clone, all
the refs are being requested through `fetch` or `import`, including the
symbolic ref.
While this works properly, in some cases of a fetch, like `git fetch url`
or `git fetch origin HEAD`, or any fetch command involving a symbolic ref
without also fetching the corresponding ref it points to, the fetch command
fails with:
fatal: bad object 0000000000000000000000000000000000000000
error: <remote> did not send all necessary objects
(in the case the remote helper returned '?' values to the `list` command).
This is because there is only one ref given to fetch(), and it's not
further resolved to something at the end of fetch_with_import().
While this can be somehow handled in the remote helper itself, by adding
a refspec for the symbolic ref, and storing an explicit ref in a private
namespace, and then handling the `import` for that symbolic ref
specifically, very few existing remote helpers are actually doing that.
So, instead of requesting the exact list of wanted refs to remote helpers,
treat symbolic refs differently and request the ref they point to instead.
Then, resolve the symbolic refs values based on the pointed ref.
This assumes there is no more than one level of indirection (a symbolic
ref doesn't point to another symbolic ref).
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An indentation error was found right after we started l10n round 2, and
commit d6589d1 (show-branch: fix indentation of usage string) and this
update would fix it.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
When commit 695d95d refactored the color parsing, it missed
a "return 0" when parsing literal numbers 0-8 (which
represent basic ANSI colors), leading us to report these
colors as an error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updated translations for Git 2.3.0 l10n round 2, and fixed various
translations for command arguments.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
The relationship between these makes more sense if you read
them as a group, which can help people who are looking for
the right function. Let's give them a single comment.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of strbuf_split_buf says most of what
needs to be said for all of the split variants that take
strings, raw memory, etc. We have a boilerplate comment
above each that points to the first. This boilerplate
ends up making it harder to read, because it spaces out the
functions, which could otherwise be read as a group.
Let's drop the boilerplate completely, and mention the
variants in the top comment. This is perhaps slightly worse
for a hypothetical system which pulls the documentation for
each function out of the comment immediately preceding it.
But such a system does not yet exist, and anyway, the end
result of extracting the boilerplate comments would not lead
to a very easy-to-read result. We would do better in the
long run to teach the extraction system about groups of
related functions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original API doc had something like:
Functions
---------
* Life cycle
... some life-cycle functions ...
* Related to the contents of the buffer
... functions related to contents ....
etc
This grouping can be hard to read in the comment sources,
given the "*" in the comment lines, and the amount of text
between each section.
Instead, let's make a flat list of groupings, and underline
each as a section header. That makes them stand out, and
eliminates the weird half-phrase of "Related to...". Like:
Functions related to the contents of the buffer
-----------------------------------------------
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is much easier to read when the whole thing is stuffed
inside a comment block. And there is precedent for this
convention in markdown (and just in general ascii text).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using a hanging indent is much more readable. This means we
won't format as asciidoc anymore, but since we don't have a
working system for extracting these comments anyway, it's
probably more important to just make the source readable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prior patch uses "/**" to denote "documentation"
comments that we pulled from api-strbuf.txt. Let's use a
consistent style for similar comments that were already in
strbuf.h.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of strbuf is documented as comments above functions,
and some is separate in Documentation/technical/api-strbuf.txt.
This makes it annoying to find the appropriate documentation.
We'd rather have it all in one place, which means all in the
text document, or all in the header.
Let's choose the header as that place. Even though the
formatting is not quite as pretty, this keeps the
documentation close to the related code. The hope is that
this makes it easier to find what you want (human-readable
comments are right next to the C declarations), and easier
for writers to keep the documentation up to date.
This is more or less a straight import of the text from
api-strbuf.txt into C comments, complete with asciidoc
formatting. The exceptions are:
1. All comments created in this way are started with "/**"
to indicate they are part of the API documentation. This
may help later with extracting the text to pretty-print
it.
2. Function descriptions do not repeat the function name,
as it is available in the context directly below. So:
`strbuf_add`::
Add data of given length to the buffer.
from api-strbuf.txt becomes:
/**
* Add data of given length to the buffer.
*/
void strbuf_add(struct strbuf *sb, const void *, size_t);
As a result, any block-continuation required in asciidoc
for that list item was dropped in favor of straight
blank-line paragraph (since it is not necessary when we
are not in a list item).
3. There is minor re-wording to integrate existing comments
and api-strbuf text. In each case, I took whichever
version was more descriptive, and eliminated any
redundancies. In one case, for strbuf_addstr, the api
documentation gave its inline definition; I eliminated
this as redundant with the actual definition, which can
be seen directly below the comment.
4. The functions in the header file are re-ordered to match
the ordering of the API documentation, under the
assumption that more thought went into the grouping
there.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIXPERM requires that a later call to stat(2) (hence "ls -l")
faithfully reproduces what an earlier chmod(2) did. Some
filesystems cannot satisify this.
SANITY requires that a file or a directory is indeed accessible (or
inaccessible) when its permission bits would say it ought to be
accessible (or inaccessible). Running tests as root would lose this
prerequisite for obvious reasons.
Fix a few tests that misuse POSIXPERM.
t0061-run-command.sh has two uses of POSIXPERM.
- One checks that an attempt to execute a file that is marked as
unexecutable results in a failure with EACCES; I do not think
having root-ness or any other capability that busts the
filesystem permission mode bits will make you run an unexecutable
file, so this should be left as-is. The test does not have
anything to do with SANITY.
- The other one expects 'git nitfol' runs the alias when an
alias.nitfol is defined and a directory on the PATH is marked as
unreadable and unsearchable. I _think_ the test tries to reject
the alternative expectation that we want to refuse to run the
alias because it would break "no alias may mask a command" rule
if a file 'git-nitfol' exists in the unreadable directory but we
cannot even determine if that is the case. Under !SANITY that
busts the permission bits, this test no longer checks that, so it
must be protected with SANITY.
t1509-root-worktree.sh expects to be run on a / that is writable by
the user and sees if Git behaves "sensibly" when /.git is the
repository to govern a worktree that is the whole filesystem, and
also if Git behaves "sensibly" when / itself is a bare repository
with refs, objects, and friends (I find the definition of "behaves
sensibly" under these conditions hard to fathom, but it is a
different matter).
The implementation of the test is very much problematic.
- It requires POSIXPERM, but it does not do chmod or checks modes
in any way.
- It runs "rm /*" and "rm -fr /refs /objects ..." in one of the
tests, and also does "cd / && git init --bare". If done on a
live system that takes advantages of the "feature" being tested,
these obviously will clobber the system. But there is no guard
against such a breakage.
- It uses "test $UID = 0" to see rootness, which now should be
spelled "! test_have_prereq NOT_ROOT"
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SANITY prerequisite is really about whether the
filesystem will respect the permissions we set, and being
root is only one part of that. But the httpd tests really
just care about not being root, as they are trying to avoid
weirdness in apache (see a1a3011 for details).
Let's switch out SANITY for a new NOT_ROOT prerequisite,
which will let us tweak SANITY more freely.
We implement NOT_ROOT by checking `id -u`, which is in POSIX
and seems to be available even on MSYS. Note that we cannot
just call this "ROOT" and ask for "!ROOT". The possible
outcomes are:
1. we know we are root
2. we know we are not root
3. we could not tell, because `id` was not available
We should conservatively treat (3) as "does not have the
prerequisite", which means that a naive negation would not
work.
Helped-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We forgot to list "tformat:<string>" when enumerating possible
values that "--pretty=<format>" can take. It was not described
that "--pretty='string with %s placeholder'" that is not understood
is DWIMmed as "--pretty=tformat:<that string>".
Further, it was unclear what "When omitted, defaults to 'medium'"
was meant. Is it "When --pretty=<something> was not given at all",
or is it "When --pretty is given without =<something>"? Clarify
that it is the latter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though "advice.h" includes "git-compat-util.h", it is not
sensible to have it as the first #include and indirectly satisify
the "You must give git-compat-util.h a clean environment to set up
feature test macros before including any of the system headers are
included", which is the real requirement.
Because:
- A command that interacts with the object store, config subsystem,
the index, or the working tree cannot do anything without using
what is declared in "cache.h";
- A built-in command must be declared in "builtin.h", so anything
in builtin/*.c must include it;
- These two headers both include "git-compat-util.h" as the first
thing; and
- Almost all our *.c files (outside compat/ and borrowed files in
xdiff/) need some Git-ness from "cache.h" to do something
Git-ish.
let's explicitly specify that one of these three header files must
be the first thing that is included.
Any of our *.c file should include the header file that directly
declares what it uses, instead of relying on the fact that some *.h
file it includes happens to include another *.h file that declares
the necessary function or type. Spell it out as another guideline
item.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was whittled down to a compatibility wrapper around the more
flexible git_prompt() in 1cb0134f (refactor git_getpass into generic
prompt function, 2011-12-10), waiting for the final callers to go
away. That happened in 791643a8 (imap-send: use git-credential,
2014-04-28) when imap-send learned to use the credential interface.
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They used to be used directly by remote-curl.c for the smart-http
protocol. But they got wrapped by run_one_slot() in beed336 (http:
never use curl_easy_perform, 2014-02-18). Any future users are
expected to follow that route.
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a simple matter of opening the directory specified in the gitfile.
[ew: tweaked check to avoid open() on directories]
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
ref_id should not match "refs/remotes/".
[ew: dropped initial hunk for GIT_SVN_ID at Ramkumar's request]
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
For some unknown reason, the dd on my Windows box segfaults randomly,
but since recently, it does so much more often than it used to, which
makes running the test suite burdensome.
Use printf to write large files instead of dd. To emphasize that three
of the large blobs are exact copies, use cp to allocate them.
The new code makes the files a bit smaller, and they are not sparse
anymore, but the tests do not depend on these properties. We do not want
to use test-genrandom here (which is used to generate large files
elsewhere in t1050), so that the files can be compressed well (which
keeps the run-time short).
The files are now large text files, not binary files. But since they
are larger than core.bigfilethreshold they are diagnosed as binary
by Git. For this reason, the 'git diff' tests that check the output
for "Binary files differ" still pass.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Build update for older RHEL.
* rh/autoconf-rhel3:
configure.ac: check for HMAC_CTX_cleanup
configure.ac: check for clock_gettime and CLOCK_MONOTONIC
configure.ac: check 'tv_nsec' field in 'struct stat'
We try to see if "tput" gives a useful result before switching TERM
to dumb and moving HOME to point to our fake location for stability
of the tests, and then use the command when coloring the output
from the tests, but there is no guarantee "tput" works after
switching HOME.
* rh/test-color-avoid-terminfo-in-original-home:
test-lib.sh: do tests for color support after changing HOME
test-lib: use 'test ...' instead of '[ ... ]'
Using the exit status of the last command in the prompt, e.g.
PS1='$(__git_ps1) $? ', did not work well because the helper
function stomped on the exit status.
* tf/prompt-preserve-exit-status:
git-prompt: preserve value of $? in all cases
* rh/hide-prompt-in-ignored-directory:
git-prompt.sh: allow to hide prompt for ignored pwd
git-prompt.sh: if pc mode, immediately set PS1 to a plain prompt
Now imap-send learned to talk to the server using cURL library,
allow the same GIT_CURL_VERBOSE environment variable to control the
verbosity of the chattering.
* km/imap-send-libcurl-options:
imap-send.c: set CURLOPT_USE_SSL to CURLUSESSL_TRY
imap-send.c: support GIT_CURL_VERBOSE
Fix recent breakage in Git 2.2 that started creating info/refs and
objects/info/packs files with permission bits tighter than user's
umask.
* jk/prune-packed-server-info:
update-server-info: create info/* with mode 0666
t1301: set umask in reflog sharedrepository=group test
"git remote add $name $URL" is now allowed when "url.$URL.insteadOf"
is already defined.
* js/remote-add-with-insteadof:
Add a regression test for 'git remote add <existing> <same-url>'
git remote: allow adding remotes agreeing with url.<...>.insteadOf
This was missing in 1b70fe5d30 (2015-01-07, receive-pack.c: negotiate
atomic push support) as I squashed the option in very late in the patch
series.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fetch a symbolic ref file from the remote, we get
the whole string "ref: refs/heads/master\n", recognize it by
skipping past the "ref: ", and store the rest. We should
chomp the trailing newline.
This bug was introduced in ae021d8 (use skip_prefix to avoid
magic numbers, 2014-06-18), which did not notice that the
length computation fed to xmemdupz was quietly tweaked by 1
to account for this.
We can solve it by explicitly trimming the newline, which is
more obvious. Note that we use strbuf_rtrim here, which will
actually cut off any trailing whitespace, not just a single
newline. This is a good thing, though, as it makes our
parsing more liberal (and spaces are not valid in refnames
anyway).
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch puts the usage info strings that were not already in docopt-
like format into docopt-like format, which will be a litle easier for
end users and a lot easier for translators. Changes include:
- Placing angle brackets around fill-in-the-blank parameters
- Putting dashes in multiword parameter names
- Adding spaces to [-f|--foobar] to make [-f | --foobar]
- Replacing <foobar>* with [<foobar>...]
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cat_one_file(), "type" and "size" variables are defined in the
function scope, and then two variables of the same name are defined
in a block in one of the if/else statement, hiding the definitions
in the outer scope.
Because the values of the outer variables before the control enters
this scope, however, do not have to be preserved, we can remove
useless definitions of variables from the inner scope safely without
breaking anything.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --grep=<string>" shows only commits with messages that
match the given string, but sometimes it is useful to be able to
show only commits that do *not* have certain messages (e.g. "show
me ones that are not FIXUP commits").
Originally, we had the invert-grep flag in grep_opt, but because
"git grep --invert-grep" does not make sense except in conjunction
with "--files-with-matches", which is already covered by
"--files-without-matches", it was moved it to revisions structure.
To have the flag there expresses the function to the feature better.
When the newly inserted two tests run, the history would have commits
with messages "initial", "second", "third", "fourth", "fifth", "sixth"
and "Second", committed in this order. The commits that does not match
either "th" or "Sec" is "second" and "initial". For the case insensitive
case only "initial" matches.
Signed-off-by: Christoph Junghans <ottxor@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The helper functions prepare_final() and prepare_initial() return a
pointer to a string that is a member of an object in the revs->pending
array. This array is later rebuilt when running prepare_revision_walk()
which potentially transforms the pointer target into a bogus string. Fix
this by maintaining a copy of the original string.
Signed-off-by: Lukas Fleischer <git@cryptocrack.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces "x ? xstrdup(x) : NULL" with xstrdup_or_null(x).
The change is fairly mechanical, with the exception of
resolve_refdup, which can eliminate a temporary variable.
There are still a few hits grepping for "?.*xstrdup", but
these are of slightly different forms and cannot be
converted (e.g., "x ? xstrdup(x->foo) : NULL").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only reason for envdup to be its own function is that we
have to save the result in a temporary string. With
xstrdup_or_null, we can feed the result of getenv()
directly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This file had its own identical helper that predates
xstrdup_or_null. Let's use the global one to avoid
repetition.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a common idiom to duplicate a string if it is non-NULL,
or pass a literal NULL through. This is already a one-liner
in C, but you do have to repeat the name of the string
twice. So if there's a function call, you must write:
const char *x = some_fun(...);
return x ? xstrdup(x) : NULL;
instead of (with this patch) just:
return xstrdup_or_null(some_fun(...));
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tcl 8.5 introduced an extended vsatisfies syntax that is not
supported by Tcl 8.4.
Since only Tcl 8.4 is required this presents a problem.
The extended syntax was used starting with Git 2.0.0 in commit
b3f0c5c0 (git-gui: tolerate major version changes when comparing the
git version, 2014-05-17), so that a major version change would still
satisfy the condition.
However, what we really want is just a basic version compare, so use
vcompare instead to restore compatibility with Tcl 8.4.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
The assume-unchanged bit, and consequently core.ignoreStat, can be
misunderstood. Be assertive about the expectation that file changes should
notified to Git.
Overhaul the general wording thus:
1. direct description of what is ignored given first.
2. example instruction of the user manual action required.
3. use sideways indirection for assume-unchanged and update-index
references.
4. add a 'normally' to give leeway for the change detection.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code handling %(upstream:track) and %(upstream:trackshort)
assumed that it always had a valid branch that had been sanitized
earlier in populate_value(), and thus did not check the return value
of the call to stat_tracking_info().
While there is indeed some sanitization code that basically
corresponds to stat_tracking_info() returning 0 (no base branch
set), the function can also return -1 when the base branch did exist
but has since then been deleted.
In this case, num_ours and num_theirs had undefined values and a
call to `git for-each-ref --format="%(upstream:track)"` could print
spurious values such as
[behind -111794512]
[ahead 38881640, behind 5103867]
even for repositories with one single commit.
Verify stat_tracking_info()'s return value and do not print anything
if it returns -1. This behavior also matches the documentation ("has
no effect if the ref does not have tracking information associated
with it").
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Raphael Kubo da Costa <raphael.kubo.da.costa@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/read-packed-refs-without-path-max:
read_packed_refs: use skip_prefix instead of static array
read_packed_refs: pass strbuf to parse_ref_line
read_packed_refs: use a strbuf for reading lines
Earlier we made "rev-list --object-edge" more aggressively list the
objects at the edge commits, in order to reduce number of objects
fetched into a shallow repository, but the change affected cases
other than "fetching into a shallow repository" and made it
unusably slow (e.g. fetching into a normal repository should not
have to suffer the overhead from extra processing). Limit it to a
more specific case by introducing --objects-edge-aggressive, a new
option to rev-list.
* bc/fetch-thin-less-aggressive-in-normal-repository:
pack-objects: use --objects-edge-aggressive for shallow repos
rev-list: add an option to mark fewer edges as uninteresting
Documentation: add missing article in rev-list-options.txt
"git checkout-index --temp=$target $path" did not work correctly
for paths outside the current subdirectory in the project.
* es/checkout-index-temp:
checkout-index: fix --temp relative path mangling
t2004: demonstrate broken relative path printing
t2004: standardize file naming in symlink test
t2004: drop unnecessary write-tree/read-tree
t2004: modernize style
The logic in "git bisect bad HEAD" etc. to avoid forcing the test
of the common ancestor of bad and good commits was broken.
* cc/bisect-rev-parsing:
bisect: add test to check that revs are properly parsed
bisect: parse revs before passing them to check_expected_revs()
The gettext N_ macro is used to mark strings for translation
without actually translating them. At runtime the string is
expected to be passed to the gettext API for translation.
If two N_ macro invocations appear next to each other with only
whitespace (or nothing at all) between them, the two separate
strings will be marked for translation, but the preprocessor
will then silently combine the strings into one and at runtime
the string passed to gettext will not match the strings that
were translated so no translation will actually occur.
Avoid this by adding parentheses around the expansion of the
N_ macro so that instead of ending up with two adjacent strings
that are then combined by the preprocessor, two adjacent strings
surrounded by parentheses result instead which causes a compile
error so the mistake can be quickly found and corrected.
However, since these string literals are typically assigned to
static variables and not all compilers support parenthesized
string literal assignments, allow this to be controlled by the
Makefile with the default only enabled when the compiler is
known to support the syntax.
For now only __GNUC__ enables this by default which covers both
gcc and clang which should result in early detection of any
adjacent N_ macros.
Although the necessary tests make the affected files a bit less
elegant, the benefit of avoiding propagation of a translation-
marking error to all the translation teams thus creating extra
work for them when the error is eventually detected and fixed
would seem to outweigh the minor inelegance the additional
configuration tests introduce.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- "exec_cmd.h" became unnecessary at b931aa5a (Call builtin ls-tree
in git-cat-file -p, 2006-05-26), when it changed an earlier code
that delegated tree display to "ls-tree" via the run_command()
API (hence needing "exec_cmd.h") to call cmd_ls_tree() directly.
We should have removed the include in the same commit, but we
forgot to do so.
- "diff.h" was added at e5fba602 (textconv: support for cat_file,
2010-06-15), together with "userdiff.h", but "userdiff.h" can be
included without including "diff.h"; the header was unnecessary
from the beginning.
- "tag.h" and "tree.h" were necessary since 8e440259 (Use blob_,
commit_, tag_, and tree_type throughout., 2006-04-02) to check
the type of object by comparing typename with tree_type and
tag_type (pointers to extern strings).
21666f1a (convert object type handling from a string to a number,
2007-02-26) made these <type>_type strings unnecessary, and it
could have switched to include "object.h", which is necessary to
use typename(), but it forgot to do so. Because "tag.h" and
"tree.h" include "object.h", it did not need to explicitly
include "object.h" in order to start using typename() itself.
We do not even have to include "object.h" after removing these
two #includes, because "builtin.h" includes "commit.h" which in
turn includes "object.h" these days. This happened at 7b9c0a69
(git-commit-tree: make it usable from other builtins,
2008-07-01).
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"cache.h" and "commit.h" are already included via "builtin.h".
We started to include "quote.h" at 575ba9d6 (GIT_TRACE: show which
built-in/external commands are executed, 2006-06-25) that wanted to
use sq_quote_print().
When 6ce4e61f (Trace into a file or an open fd and refactor tracing
code., 2006-09-02) introduced trace.c API, the calls this file makes
to sq_quote_print() were replaced by calls to trace_argv_printf()
that are declared in "cache.h", which this file already includes.
We should have stopped including "quote.h" in that commit, but
forgot to do so.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OpenSSL version 0.9.6b and before defined the function HMAC_cleanup.
Newer versions define HMAC_CTX_cleanup. Check for HMAC_CTX_cleanup and
fall back to HMAC_cleanup when the newer function is missing.
Signed-off-by: Reuben Hawkins <reubenhwk@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set or clear Makefile variables HAVE_CLOCK_GETTIME and
HAVE_CLOCK_MONOTONIC based upon results of the checks (overriding
default values from config.mak.uname).
CLOCK_MONOTONIC isn't available on RHEL3, but there are still RHEL3
systems being used in production.
Signed-off-by: Reuben Hawkins <reubenhwk@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Detect 'tv_nsec' field in 'struct stat' and set Makefile variable
NO_NSEC appropriately.
A side-effect of the above detection is that we also determine
whether 'stat.st_mtimespec' is available, so, as a bonus, set the
Makefile variable USE_ST_TIMESPEC, as well.
Signed-off-by: Reuben Hawkins <reubenhwk@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receive.denyCurrentBranch is set to updateInstead, a push that
tries to update the branch that is currently checked out is accepted
only when the index and the working tree exactly matches the
currently checked out commit, in which case the index and the
working tree are updated to match the pushed commit. Otherwise the
push is refused.
This hook can be used to customize this "push-to-deploy" logic. The
hook receives the commit with which the tip of the current branch is
going to be updated, and can decide what kind of local changes are
acceptable and how to update the index and the working tree to match
the updated tip of the current branch.
For example, the hook can simply run `git read-tree -u -m HEAD "$1"`
in order to emulate 'git fetch' that is run in the reverse direction
with `git push`, as the two-tree form of `read-tree -u -m` is
essentially the same as `git checkout` that switches branches while
keeping the local changes in the working tree that do not interfere
with the difference between the branches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have been silently tolerating errors by returning early with an
error that the caller ignores since rerere.autoupdate was introduced
in v1.6.0-rc0~120^2 (2008-06-22). So on error (for example if the
index is already locked), rerere can return success silently without
updating the index or with only some items in the index updated.
Better to treat such failures as a fatal error so the operator can
figure out what is wrong and fix it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds tests for the atomic push option.
The first four tests check if the atomic option works in
good conditions and the last three patches check if the atomic
option prevents any change to be pushed if just one ref cannot
be updated.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a command line argument to the git push command to request atomic
pushes.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds support to send-pack to negotiate and use atomic pushes
iff the server supports it. Atomic pushes are activated by a new command
line flag --atomic.
In order to do this we also need to change the semantics for send_pack()
slightly. The existing send_pack() function actually doesn't send all the
refs back to the server when multiple refs are involved, for example
when using --all. Several of the failure modes for pushes can already be
detected locally in the send_pack client based on the information from the
initial server side list of all the refs as generated by receive-pack.
Any such refs that we thus know would fail to push are thus pruned from
the list of refs we send to the server to update.
For atomic pushes, we have to deal thus with both failures that are detected
locally as well as failures that are reported back from the server. In order
to do so we treat all local failures as push failures too.
We introduce a new status code REF_STATUS_ATOMIC_PUSH_FAILED so we can
flag all refs that we would normally have tried to push to the server
but we did not due to local failures. This is to improve the error message
back to the end user to flag that "these refs failed to update since the
atomic push operation failed."
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This renames ref_update_to_be_sent to check_to_send_update and inverts
the meaning of the return value. Having the return value inverted we
can have different values for the error codes. This is useful in a
later patch when we want to know if we hit the CHECK_REF_STATUS_REJECTED
case.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the atomic protocol option to allow
receive-pack to inform the client that it has
atomic push capability.
This commit makes the functionality introduced
in the previous commits go live for the serving
side. The changes in documentation reflect the
protocol capabilities of the server.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces the new function execute_commands_atomic which will use
one atomic transaction for all updates. The default behavior is still
the old non atomic way, one ref at a time. This is to cause as little
disruption as possible to existing clients. It is unknown if there are
client scripts that depend on the old non-atomic behavior so we make it
opt-in for now.
A later patch will add the possibility to actually use the functionality
added by this patch. For now use_atomic is always 0.
Inspired-by: Ronnie Sahlberg <sahlberg@google.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves all code related to transactions into the
execute_commands_non_atomic function. This includes
beginning and committing the transaction as well as
dealing with the errors which may occur during the
begin and commit phase of a transaction.
No functional changes intended.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit allows us in a later patch to easily distinguish between
the non atomic way to update the received refs and the atomic way which
is introduced in a later patch.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Discussion on the previous patch revealed we rather want to err on the
safe side. To do so we need to stop receive-pack in case of the possible
future bug when connectivity is not checked on a shallow push.
Also while touching that code we considered that removing the reported
refs may be harmful in some situations. Sound the message more like a
"This Cannot Happen, Please Investigate!" instead of giving advice to
remove refs.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the main "execute_commands" loop in receive-pack easier to read
by splitting out some steps into helper functions. The new helper
'should_process_cmd' checks if a ref update is unnecessary, whether
due to an error having occurred or for another reason. The helper
'warn_if_skipped_connectivity_check' warns if we have forgotten to
run a connectivity check on a ref which is shallow for the client
which would be a bug.
This will help us to duplicate less code in a later patch when we make
a second copy of the "execute_commands" loop.
No functional change intended.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apache servers using mod_auth_kerb can be configured to allow the user
to authenticate either using Negotiate (using the Kerberos ticket) or
Basic authentication (using the Kerberos password). Often, one will
want to use Negotiate authentication if it is available, but fall back
to Basic authentication if the ticket is missing or expired.
However, libcurl will try very hard to use something other than Basic
auth, even over HTTPS. If Basic and something else are offered, libcurl
will never attempt to use Basic, even if the other option fails.
Teach the HTTP client code to stop trying authentication mechanisms that
don't use a password (currently Negotiate) after the first failure,
since if they failed the first time, they will never succeed.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.submodule when set to log produces output which git-am cannot
handle. Ignore this setting when generating patch output.
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git am will break when using diff.submodule=log; add some test cases
to illustrate this breakage as simply as possible. There are
currently two ways this can fail:
* With errors ("unrecognized input"), if only change
* Silently (no submodule change), if other files change
Test for both conditions and ensure without diff.submodule this works.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sample pre-push hook used customized IFS=' ' for no good reason.
* jh/pre-push-sample-no-custom-ifs:
pre-push.sample: remove unnecessary and misleading IFS=' '
Using the exit status of the last command in the prompt, e.g.
PS1='$(__git_ps1) $? ', did not work well because the helper
function stomped on the exit status.
* tf/prompt-preserve-exit-status:
git-prompt: preserve value of $? inside shell prompt
Simplify the procedure to generate unicode table.
* bb/update-unicode-table:
update_unicode.sh: delete the command group
update_unicode.sh: make the output structure visible
update_unicode.sh: shorten uniset invocation path
update_unicode.sh: set UNICODE_DIR only once
update_unicode.sh: simplify output capture
"git send-email" normally identifies itself via X-Mailer: header
in the message it sends out. A new command line flag allows the
user to squelch the header.
* lh/send-email-hide-x-mailer:
test/send-email: --[no-]xmailer tests
send-email: add --[no-]xmailer option
"git send-email" did not handle RFC 2047 encoded headers quite
right.
* rd/send-email-2047-fix:
send-email: handle adjacent RFC 2047-encoded words properly
send-email: align RFC 2047 decoding more closely with the spec
The top-of-the-file instruction for completion scripts (in contrib/)
did not name the files correctly.
* pd/completion-filenames-fix:
Update documentation occurrences of filename .sh
"git add -i" did not notice when the interactive command input
stream went away and kept asking.
* jk/add-i-read-error:
add--interactive: leave main loop on read error
Traditionally we tried to avoid interpreting date strings given by
the user as future dates, e.g. GIT_COMMITTER_DATE=2014-12-10 when
used early November 2014 was taken as "October 12, 2014" because it
is likely that a date in the future, December 10, is a mistake.
Loosen this and do not tiebreak by future-ness of the date when
(1) ISO-like format is used, and
(2) the string can make sense interpreted as both y-m-d and y-d-m.
* jk/approxidate-avoid-y-d-m-over-future-dates:
approxidate: allow ISO-like dates far in the future
pass TIME_DATE_NOW to approxidate future-check
Newer libCurl knows how to talk IMAP; "git imap-send" has been
updated to use this instead of a hand-rolled OpenSSL calls.
* br/imap-send-via-libcurl:
git-imap-send: use libcurl for implementation
The lockfile API can get confused which file to clean up when the
process moved the $cwd after creating a lockfile.
* nd/lockfile-absolute:
lockfile.c: store absolute path
The get_merge_bases*() API was easy to misuse by careless
copy&paste coders, leaving object flags tainted in the commits that
needed to be traversed.
* jc/merge-bases:
get_merge_bases(): always clean-up object flags
bisect: clean flags after checking merge bases
The commented output used to blindly add a SP before the payload
line, resulting in "# \t<indented text>\n" when the payload began
with a HT. Instead, produce "#\t<indented text>\n".
* jc/strbuf-add-lines-avoid-sp-ht-sequence:
strbuf_add_commented_lines(): avoid SP-HT sequence in commented lines
The report from "git checkout" on a branch that builds on another
local branch by setting its branch.*.merge to branch name (not a
full refname) incorrectly said that the upstream is gone.
* jc/checkout-local-track-report:
checkout: report upstream correctly even with loosely defined branch.*.merge
This option was added in 58794775 (rebase: implement
--[no-]autostash and rebase.autostash, 2013-05-12).
Completion of "--autosquash" has been there, but this was not;
addition of this would require people completing "--autosquash" to
type a bit more than before.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-send-email documentation was never updated to reflect
the change made in 01645b74 to use the SSL library's default
CA trust store rather than /etc/ssl/certs as a hardcoded
default CApath. This corrects that, and also tweaks the rest
of the text a bit to explain more accurately what is required
for a valid CApath / CAfile.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If ncurses needs ~/.terminfo for the current $TERM, then tput will
succeed before changing HOME to $TRASH_DIRECTORY but fail afterward.
Move the tests that determine whether there is color support after
changing HOME so that color=t is set if and only if tput would succeed
when say_color() is run.
Note that color=t is now set after --no-color is processed, so the
condition to set color=t has changed: it is now set only if
color has not already been set to the empty string by --no-color.
This disables color support for those that need ~/.terminfo for
their TERM, but it's better than filling the screen with:
tput: unknown terminal "custom-terminal-name-here"
An alternative would be to symlink or copy the user's terminfo
database into $TRASH_DIRECTORY, but this is tricky due to the lack of
a standard name for the terminfo database (for example, instead of a
~/.terminfo directory, NetBSD uses a ~/.terminfo.cdb database file).
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optionally set __git_ps1 to display nothing when present working
directory is ignored, triggered by the new environment variable
GIT_PS1_HIDE_IF_PWD_IGNORED. This environment variable may be
overridden on any repository by setting bash.hideIfPwdIgnored to
"false". In the absence of GIT_PS1_HIDE_IF_PWD_IGNORED this change
has no effect.
Many people manage e.g. dotfiles in their home directory with git.
This causes the prompt generated by __git_ps1 to refer to that "top
level" repo while working in any descendant directory. That can be
distracting, so this patch helps one shut off that noise.
Signed-off-by: Jess Austin <jess.austin@gmail.com>
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Reviewed-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the beginning of __git_ps1, right after determining that the
function is running in pc mode, set PS1 to a plain (undecorated)
prompt. This makes it possible to simply return early without having
to set PS1 if the prompt should not be decorated.
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The goal seems to be using multiple checkouts to reduce disk space.
But we have not reached an agreement how things should be. There are a
couple options.
- You may want to keep $SUB repos elsewhere (perhaps in a central
place) outside $SUPER. This is also true for nested submodules
where a superproject may be a submodule of another superproject.
- You may want to keep all $SUB repos in $SUPER/modules (or some
other place in $SUPER)
- We could even push it further and merge all $SUB repos into $SUPER
instead of storing them separately. But that would at least require
ref namespace enabled.
On top of that, git-submodule.sh expects $GIT_DIR/config to be
per-worktree, at least for the submodule.* part. Here I think we have
two options, either update config.c to also read
$GIT_DIR/config.worktree (which is per worktree) in addition to
$GIT_DIR/config (shared) and store worktree-specific vars in the new
place, or update git-submodule.sh to read/write submodule.* directly
from $GIT_DIR/config.submodule (per worktree).
These take time to address properly. Meanwhile, make a note to the
user that they should not use multiple worktrees in submodule context.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to d38379e (make update-server-info more robust, 2014-09-13),
we used a straight "fopen" to create the info/refs and
objects/info/packs files, which creates the file using mode 0666
(less the default umask).
In d38379e, we switched to creating the file with mkstemp to get a
unique filename. But mkstemp also uses the more restrictive 0600
mode to create the file. This was an unintended side effect that we
did not want, and causes problems when the repository is served by a
different user than the one running update-server-info (it is not
readable by a dumb http server running as `www`, for example).
We can fix this by using git_mkstemp_mode and specifying 0666 to
make sure that the umask is honored.
Note that we could also say "just use core.sharedrepository", as we
do call adjust_shared_perm on the result before renaming it into
place. But that should not be necessary as long as everybody
involved is using permissive umask to allow HTTP server to read
necessary files.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the cURL documentation for the CURLOPT_USE_SSL option,
it is only used with plain text protocols that get upgraded to SSL
using the STARTTLS command.
The server.use_ssl variable is only set when we are using a protocol
that is already SSL/TLS (i.e. imaps), so setting CURLOPT_USE_SSL
when the server.use_ssl variable is set has no effect whatsoever.
Instead, set CURLOPT_USE_SSL to CURLUSESSL_TRY when the server.use_ssl
variable is NOT set so that cURL will attempt to upgrade the plain
text connection to SSL/TLS using STARTTLS in that case.
This much more closely matches the behavior of the non-cURL code path.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git-imap-send to send via cURL, support setting
the GIT_CURL_VERBOSE environment variable to enable cURL's
verbose mode.
The existing http.c code already supports this and does
it by simply checking to see whether or not the environment
variable exists -- it does not examine the value at all.
For consistency, enable CURLOPT_VERBOSE when GIT_CURL_VERBOSE
is set by using the exact same test that http.c does.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parse_options API expects an array of alternative usage lines
to which it automatically ads the language-appropriate "or" when
displaying. Each of these options is marked for translation with N_
and then later translated when gettext is called on each element
of the array.
Since the N_ macro just expands to its argument, if two N_-marked
strings appear next to each other without being separated by anything
else such as a comma, the preprocessor will join them into one string.
In that case two separate strings get marked for translation, but at
runtime they have been joined into a single string passed to gettext
which then fails to get translated because the combined string was
never marked for translation.
Fix this by properly separating the two N_ marked strings with
a comma and removing the embedded "\n" and " or:" that are
properly supplied by the parse_options API.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The t1301 script sets the umask globally before many of the
tests. Most of the tests that care about the umask then set
it explicitly at the start of the test. However, one test
does not, and relies on the 077 umask setting from earlier
tests. This is fragile and can break if another test is
added in between. Let's be more explicit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gui.maxfilesdisplayed (added in dd6451f9c7)
was applied brute force on the file list in alphabetic order. As a result,
files that had modifications might not be displayed by git-gui. Even
worse, files that are already in the index might not be displayed, which
makes git-gui hard to use in some workflows.
This fix changes the meaning of gui.maxfilesdisplayed, making it a soft
limit that only applies to "_O" files, i.e. files that are "Untracked,
not staged".
Signed-off-by: Csaba Kiraly <kiraly@disi.unitn.it>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Don't just reset, but release the resource held by the local
variable that is about to go out of scope.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we have never seen attr 'X' in any .gitattributes file we have
examined so far, we can be sure that 'X' is not defined. So no need to
go over all the attr stack to look for attr 'X'. This is the purpose
behind this new field maybe_real.
This optimization breaks down if macros are involved because we can't
know for sure what macro would expand to 'X' at attr parsing time. But
if we go the pessimistic way and assume all macros are expanded, we hit
the builtin "binary" macro. At least the "diff" attr defined in this
macro will disable this optimization for git-grep. So we wait until
any attr lines _may_ reference to a macro before we turn this off.
In git.git, this reduces the number of fill_one() call for "git grep
abcdefghi" from ~5348 to 2955. The optimization stops when it reads
t/.gitattributes, which uses 'binary' macro. We could probably reduce
it further by limiting the 'binary' reference to t/ and subdirs only
in this case.
"git grep" is actually a good example to justify this patch. The
command checks "diff" attribute on every file. People usually don't
define this attribute. But they pay the attr lookup penalty anyway
without this patch, proportional to the number of attr lines they have
in repo.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep track of all recognized macros in the new "maybe_macro" field.
If this field is true, it _may_ be a macro (depending on what's in the
current attr stack). But if the field is false, it's definitely not a
macro, no need to go through the whole attr stack in macroexpand_one()
to search for one.
Without this, "git grep abcdefghi" on git.git hits the inner loop in
macroexpand_one() 2481 times. With this, it's 66 times.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our is_hfs_dotgit function relies on the hackily-implemented
next_hfs_char to give us the next character that an HFS+
filename comparison would look at. It's hacky because it
doesn't implement the full case-folding table of HFS+; it
gives us just enough to see if the path matches ".git".
At the end of next_hfs_char, we use tolower() to convert our
32-bit code point to lowercase. Our tolower() implementation
only takes an 8-bit char, though; it throws away the upper
24 bits. This means we can't have any false negatives for
is_hfs_dotgit. We only care about matching 7-bit ASCII
characters in ".git", and we will correctly process 'G' or
'g'.
However, we _can_ have false positives. Because we throw
away the upper bits, code point \u{0147} (for example) will
look like 'G' and get downcased to 'g'. It's not known
whether a sequence of code points whose truncation ends up
as ".git" is meaningful in any language, but it does not
hurt to be more accurate here. We can just pass out the full
32-bit code point, and compare it manually to the upper and
lowercase characters we care about.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running for example "git bisect bad HEAD" or
"git bisect good master", the parameter passed to
"git bisect (bad|good)" has to be parsed into a
commit hash before checking if it is the expected
commit or not.
We could do that in is_expected_rev() or in
check_expected_revs(), but it is already done in
bisect_state(). Let's just store the hash values
that result from this parsing, and then reuse
them after all the parsing is done.
This way we can also use a for loop over these
values to call bisect_write() on them, instead of
using eval.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout-index --temp only properly prints relative paths which are
descendants of the current directory. Paths in ancestor or sibling
directories (or their children) are often printed in mangled form. For
example:
mkdir a bbb &&
>file &&
>bbb/file &&
git update-index --add file bbb/file &&
cd a &&
git checkout-index --temp ../file ../bbb/file
prints:
.merge_file_ooblek le
.merge_file_igloo0 b/file
rather than the correct:
.merge_file_ooblek ../file
.merge_file_igloo0 ../bbb/file
Internally, given the above example, checkout-index prefixes each input
argument with the name of the current directory ("a/", in this case),
and then assumes that it can simply skip forward by strlen("a/") bytes
to recover the original name. This works for files in the current
directory or its descendants, but fails for files in ancestors or
siblings (or their children) due to path normalization.
For instance, given "../file", "a/" is prepended, giving "a/../file".
Path normalization folds out "a/../", resulting in "file". Attempting
to recover the original name by skipping strlen("a/") bytes gives the
incorrect "le" rather than the desired "../file".
Fix this by taking advantage of write_name_quoted_relative() to recover
the original name properly, rather than assuming that it can be
recovered by skipping strlen(prefix) bytes.
As a bonus, this also fixes a bug in which checkout-index --temp
accessed and printed memory beyond the end-of-string. For instance,
within a subdirectory named "subdirectory", and given argument
"../file", prefixing would give "subdirectory/../file", which would
become "file" after normalization. checkout-index would then attempt to
recover the original name by skipping strlen("subdirectory/") bytes of
"file", which placed it well beyond end-of-string. Despite this error,
it often appeared to give the correct result, but only due to an
accident of implementation which left an apparently correct copy of the
path in memory following the normalized value. In particular, handed
"subdirectory/../file", in-place processing by normalize_path_copy_len()
resulted in "file\0rectory/../file". When checkout-index skipped
strlen("subdirectory/") bytes, it ended up back at "../file" and thus
appeared to give the correct answer, despite being past end-of-string.
Reported-by: Russ Cox <rsc@golang.org>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout-index --temp only properly prints relative paths which are
descendants of the current directory. Paths in ancestor or sibling
directories (or their children) are often printed in mangled form. For
example:
mkdir a bbb &&
>file &&
>bbb/file &&
git update-index --add file bbb/file &&
cd a &&
git checkout-index --temp ../file ../bbb/file
prints:
.merge_file_ooblek le
.merge_file_igloo0 b/file
rather than the correct:
.merge_file_ooblek ../file
.merge_file_igloo0 ../bbb/file
Unfortunately, testing is complicated slightly by relative paths
sometimes _appearing_ to be printed correctly, but this is an accident
of implementation in which a "correct" copy of the string exists in
memory beyond the end of the real string, and that "correct" copy gets
printed. This test takes care to avoid the accidentally "correct"
behavior by testing with a filename longer than the directory name in
which checkout-index is invoked.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update "symlink" test to use the common file naming scheme so that its
temporary files can be cleaned up by the "rm -f path*" idiom employed by
other tests in this script.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike earlier tests which reference several trees prepared by "setup",
no other tests utilize the tree from the "symlink" test, so there is no
need to write it (or read it back immediately).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular:
* indent test body
* place test description on same line as test_expect_*
* place closing quote on its own line
* name output file "actual" rather than "out"
* name setup test "setup" rather than "preparation"
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching into or pushing from a shallow repository, we want to
aggressively mark edges as uninteresting, since this decreases the pack
size. However, aggressively marking edges can negatively affect
performance on large non-shallow repositories with lots of refs.
Teach pack-objects a --shallow option to indicate that we're pushing
from or fetching into a shallow repository. Use
--objects-edge-aggressive only for shallow repositories and otherwise
use --objects-edge, which performs better in the general case. Update
the callers to pass the --shallow option when they are dealing with a
shallow repository.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit fbd4a70 (list-objects: mark more commits as edges in
mark_edges_uninteresting - 2013-08-16), we marked an increasing number
of edges uninteresting. This change, and the subsequent change to make
this conditional on --objects-edge, are used by --thin to make much
smaller packs for shallow clones.
Unfortunately, they cause a significant performance regression when
pushing non-shallow clones with lots of refs (23.322 seconds vs.
4.785 seconds with 22400 refs). Add an option to git rev-list,
--objects-edge-aggressive, that preserves this more aggressive behavior,
while leaving --objects-edge to provide more performant behavior.
Preserve the current behavior for the moment by using the aggressive
option.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git update-ref --stdin"'s verify command did not work well when
<oldvalue>, which is documented as optional, was missing.
* mh/update-ref-verify:
update-ref: fix "verify" command with missing <oldvalue>
t1400: add some more tests of "update-ref --stdin"'s verify command
When adding a remote, we make sure that the remote does not exist
already. However, this test was not quite correct: when the
url.<...>.insteadOf config variable was set to the remote name to be
added, the code would assume that the remote exists already.
Let's allow adding remotes when there is a url.<...>.insteadOf setting
when both the name and the URL agree with the remote to be added.
It might seem like a mistake to compare against remote->url[0] without
verifying that remote->url_nr >=1, but at this point a missing URL has
been filled by the name already, therefore url_nr cannot be zero.
Noticed by Anastas Dancha.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The awk statements previously used in this test weren't compatible
with the native versions of awk on Solaris:
echo "dir" | /bin/awk -v c=0 '$1 {++c} END {print c}'
awk: syntax error near line 1
awk: bailing out near line 1
echo "dir" | /usr/xpg4/bin/awk -v c=0 '$1 {++c} END {print c}'
0
Even though we do not cater to tools in /usr/bin on Solaris that
have and are overridden by corresponding ones in /usr/xpg?/bin,
in this case, even the XPG version does not work correctly.
With GNU awk for comparison:
echo "dir" | /opt/csw/gnu/awk -v c=0 '$1 {++c} END {print c}'
1
which is what this test expects (and is in line with POSIX; non-empty
string is true and an empty string is false).
Work this issue around by using $1 != "" to state more explicitly
that we are skipping empty lines.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ben Walton <bdwalton@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git-prompt" (in contrib/) used a variable from the global scope,
possibly contaminating end-user's namespace.
* jg/prompt-localize-temporary:
git-prompt.sh: make $f local to __git_eread()
Recent GPG changes the keyring format and drops support for RFC1991
formatted signatures, breaking our existing tests.
* ch/new-gpg-drops-rfc-1991:
tests: make comment on GPG keyring match the code
tests: squelch noise from GPG machinery set-up
tests: replace binary GPG keyrings with ASCII-armored keys
tests: skip RFC1991 tests for gnupg 2.1
tests: create gpg homedir on the fly
Git did not correctly read an overlong refname from a packed refs
file.
* jk/read-packed-refs-without-path-max:
read_packed_refs: use skip_prefix instead of static array
read_packed_refs: pass strbuf to parse_ref_line
read_packed_refs: use a strbuf for reading lines
"git push" and "git fetch" did not communicate an overlong refname
correctly.
* jk/always-allow-large-packets:
pkt-line: allow writing of LARGE_PACKET_MAX buffers
"diff-highlight" filter (in contrib/) allows its color output
to be customized via configuration variables.
* jk/colors:
parse_color: drop COLOR_BACKGROUND macro
diff-highlight: allow configurable colors
parse_color: recognize "no$foo" to clear the $foo attribute
parse_color: support 24-bit RGB values
parse_color: refactor color storage
New tag object format validation added in 2.2 showed garbage
after a tagname it reported in its error message.
* js/fsck-tag-validation:
index-pack: terminate object buffers with NUL
fsck: properly bound "invalid tag name" error message
Fixes long-standing misunderstanding of what assume-unchanged is
about. Some text near what is removed by the bottom patch may also
have to be removed.
* po/doc-assume-unchanged:
gitignore.txt: do not suggest assume-unchanged
doc: make clear --assume-unchanged's user contract
"git branch -d" (delete) and "git branch -m" (move) learned to
honor "-f" (force) flag; unlike many other subcommands, the way to
force these have been with separate "-D/-M" options, which was
inconsistent.
* mg/branch-d-m-f:
branch: allow -f with -m and -d
t3200-branch: test -M
The code that reads the reflog from the newer to the older entries
did not handle an entry that crosses a boundary of block it uses to
read them correctly.
* jk/for-each-reflog-ent-reverse:
for_each_reflog_ent_reverse: turn leftover check into assertion
for_each_reflog_ent_reverse: fix newlines on block boundaries
API simplification.
* sb/string-list:
string_list: remove string_list_insert_at_index() from its API
mailmap: use higher level string list functions
string_list: document string_list_(insert,lookup)
Credential helpers are asked in turn until one of them give
positive response, which is cumbersome to turn off when you need to
run Git in an automated setting. The credential helper interface
learned to allow a helper to say "stop, don't ask other helpers."
Also GIT_TERMINAL_PROMPT environment can be set to false to disable
our built-in prompt mechanism for passwords.
* jk/credential-quit:
prompt: respect GIT_TERMINAL_PROMPT to disable terminal prompts
credential: let helpers tell us to quit
Long overdue departure from the assumption that S_IFMT is shared by
everybody made in 2005.
* dm/compat-s-ifmt-for-zos:
compat: convert modes to use portable file type values
"git new-workdir" (in contrib/) can be used to populate an empty
and existing directory now.
* ps/new-workdir-into-empty-directory:
git-new-workdir: don't fail if the target directory is empty
"git ls-tree" does not support path selection based on negative
pathspecs, but did not error out when negative pathspecs are given.
* nd/ls-tree-pathspec:
t3102: style modernization
t3102: document that ls-tree does not yet support negated pathspec
ls-tree: disable negative pathspec because it's not supported
ls-tree: remove path filtering logic in show_tree
tree.c: update read_tree_recursive callback to pass strbuf as base
"git push" into a repository with a working tree normally refuses
to modify the branch that is checked out. The command learned to
optionally do an equivalent of "git reset --hard" only when there
is no change to the working tree and the index instead, which would
be useful to "deploy" by pushing into a repository.
* js/push-to-deploy:
t5516: more tests for receive.denyCurrentBranch=updateInstead
receive-pack: add another option for receive.denyCurrentBranch
The function sometimes returned a non-freeable memory and some
other times returned a piece of memory that must be freed.
* jc/exec-cmd-system-path-leak-fix:
system_path(): always return free'able memory to the caller
The code to abbreviate an object name to its short unique prefix
has been optimized when no abbreviation was requested.
* mh/find-uniq-abbrev:
sha1_name: avoid unnecessary sha1 lookup in find_unique_abbrev
"git am" learned "--message-id" option to copy the message ID of
the incoming e-mail to the log message of resulting commit.
* pb/am-message-id-footer:
git-am: add --message-id/--no-message-id
git-mailinfo: add --message-id
"git remote update --prune" to drop many refs has been optimized.
* mh/simplify-repack-without-refs:
sort_string_list(): rename to string_list_sort()
prune_remote(): iterate using for_each_string_list_item()
prune_remote(): rename local variable
repack_without_refs(): make the refnames argument a string_list
prune_remote(): sort delete_refs_list references en masse
prune_remote(): initialize both delete_refs lists in a single loop
prune_remote(): exit early if there are no stale references
Some filesystems assign filemodes in a strange way, fooling then
automatic "filemode trustability" check done during a new
repository creation.
* tb/config-core-filemode-check-on-broken-fs:
init-db: improve the filemode trustability check
"git interpret-trailers" learned to properly handle the
"Conflicts:" block at the end.
* cc/interpret-trailers-more:
trailer: add test with an old style conflict block
trailer: reuse ignore_non_trailer() to ignore conflict lines
commit: make ignore_non_trailer() non static
merge & sequencer: turn "Conflicts:" hint into a comment
builtin/commit.c: extract ignore_non_trailer() helper function
merge & sequencer: unify codepaths that write "Conflicts:" hint
builtin/merge.c: drop a parameter that is never used
The build procedure did not bother fixing perl and python scripts
when NO_PERL and NO_PYTHON build-time configuration changed.
* jk/rebuild-perl-scripts-with-no-perl-seting-change:
Makefile: have python scripts depend on NO_PYTHON setting
Makefile: simplify by using SCRIPT_{PERL,SH}_GEN macros
Makefile: have perl scripts depend on NO_PERL setting
Some tests that depend on perl lacked PERL prerequisite to protect
them, breaking build with NO_PERL configuration.
* jk/no-perl-tests:
t960[34]: mark cvsimport tests as requiring perl
t0090: mark add-interactive test with PERL prerequisite
Git 2.0 was supposed to make the "simple" mode for the default of
"git push", but it didn't.
* jk/push-simple:
push: truly use "simple" as default, not "upstream"
"git init" (hence "git clone") initialized the per-repository
configuration file .git/config with x-bit by mistake.
* mh/config-flip-xbit-back-after-checking:
create_default_files(): don't set u+x bit on $GIT_DIR/config
"gitweb" used to depend on a behaviour that was deprecated by recent
CGI.pm.
* jk/gitweb-with-newer-cgi-multi-param:
gitweb: hack around CGI's list-context param() handling
open() emulated on Windows platforms did not give EISDIR upon an
attempt to open a directory for writing.
* js/windows-open-eisdir-error:
Windows: correct detection of EISDIR in mingw_open()
"git config --get-color" did not parse its command line arguments
carefully.
* jk/colors-fix:
t4026: test "normal" color
config: fix parsing of "git config --get-color some.key -1"
docs: describe ANSI 256-color mode
"git checkout $treeish $path", when $path in the index and the
working tree already matched what is in $treeish at the $path,
still overwrote the $path unnecessarily.
* jk/checkout-from-tree:
checkout $tree: do not throw away unchanged index entries
If you have a prompt which displays the command exit status,
__git_ps1 without this change corrupts it, although it has
the correct value in the parent shell:
~/src/git (master) 0 $ set | grep ^PS1
PS1='\w$(__git_ps1) $? \$ '
~/src/git (master) 0 $ false
~/src/git (master) 0 $ echo $?
1
~/src/git (master) 0 $
There is a slightly ugly workaround:
~/src/git (master) 0 $ set | grep ^PS1
PS1='\w$(x=$?; __git_ps1; exit $x) $? \$ '
~/src/git (master) 0 $ false
~/src/git (master) 1 $
This change makes the workaround unnecessary.
Signed-off-by: Tony Finch <dot@dotat.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sample hook explicitly sets IFS to SP and nothing else so that
the "read" used in the per-ref while loop that iterates over
"<localref> SP <localsha1> SP <remoteref> SP <remotesha>" records,
where we know refs and sha1s will not have SPs, would split them
correctly.
While this is not wrong per-se, it is not necessary; because we know
these fields do not contain HT or LF, either, we can simply leave
IFS the default.
This will also prevent those who cut and paste from this sample from
getting bitten when they write things in the per-ref loop that need
splitting with the default $IFS (e.g. use $(git rev-list ...) to
produce one-record-per-line output).
Signed-off-by: Jim Hill <gjthill@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of calculating whether to put a plus or minus sign, offload
the responsibilty to the fprintf function.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now the struct ref_lock is used completely internally, so let's
remove it from the header file.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inline the function at its one remaining caller (which is within
refs.c) and remove it.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move expire_reflog() into refs.c and rename it to reflog_expire().
Turn the three policy functions into function pointers that are passed
into reflog_expire(). Add function prototypes and documentation to
refs.h.
[jc: squashed in $gmane/261582, drop "extern" in function definition]
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Tweaked-by: Ramsay Jones
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the whole file is generated by one single command, the
command group is no longer needed.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By using a here document instead of the echo/uniset sequence, the
final structure of the generated file becomes obvious.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"uniset/uniset" is a relative path; there's no need to prefix it
with "./".
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The value is the same on both uniset invocations, so "Don't Repeat
Yourself" applies.
Since this is done as the last command in the sequence, there's no
need to unset UNICODE_DIR at the end.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of capturing the output of each echo and uniset invocation,
wrap the whole section in a group command and redirect its output
all at once.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Developers Certificate of Origin has a mixture of tabs and white
spaces which is annoying to view if your editor explicitly views white
space characters.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the release of Mac OS X 10.7 in July 2011, Apple deprecated all
openssl.h functionality due to OpenSSL ABI (application binary
interface) instability, resulting in an explosion of compilation
warnings about deprecated SSL, SHA1, and X509 functions (among others).
61067954ce (cache.h: eliminate SHA-1 deprecation warnings on Mac OS X;
2013-05-19) and be4c828b76 (imap-send: eliminate HMAC deprecation
warnings on Mac OS X; 2013-05-19) attempted to ameliorate the situation
by taking advantage of drop-in replacement functionality provided by
Apple's (ABI-stable) CommonCrypto facility, however CommonCrypto
supplies only a subset of deprecated OpenSSL functionality, thus a host
of warnings remain.
Despite this shortcoming, it was hoped that Apple would ultimately
provide CommonCrypto replacements for all deprecated OpenSSL
functionality, and that the effort started by 61067954ce and be4c828b76
would be continued and eventually eliminate all deprecation warnings.
However, now 3.5 years later, and with Mac OS X at 10.10, the hoped-for
CommonCrypto replacements have not yet materialized, nor is there any
indication that they will be forthcoming.
These Apple-specific warnings are pure noise: they don't tell us
anything useful and we have no control over them, nor is Apple likely to
provide replacements any time soon. Such noise may obscure other
legitimate warnings, therefore silence them.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the index can block pathnames that can be mistaken
to mean ".git" on NTFS and FAT32, it would be helpful for
fsck to notice such problematic paths. This lets servers
which use receive.fsckObjects block them before the damage
spreads.
Note that the fsck check is always on, even for systems
without core.protectNTFS set. This is technically more
restrictive than we need to be, as a set of users on ext4
could happily use these odd filenames without caring about
NTFS.
However, on balance, it's helpful for all servers to block
these (because the paths can be used for mischief, and
servers which bother to fsck would want to stop the spread
whether they are on NTFS themselves or not), and hardly
anybody will be affected (because the blocked names are
variants of .git or git~1, meaning mischief is almost
certainly what the tree author had in mind).
Ideally these would be controlled by a separate
"fsck.protectNTFS" flag. However, it would be much nicer to
be able to enable/disable _any_ fsck flag individually, and
any scheme we choose should match such a system. Given the
likelihood of anybody using such a path in practice, it is
not unreasonable to wait until such a system materializes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for NTFS
and FAT32; let's use it in verify_path().
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on NTFS nor FAT32.
In practice this probably doesn't matter, though, as
the restricted names are rather obscure and almost
certainly would never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectNTFS config
option. Though this is expected to be most useful on Windows,
we allow it to be set everywhere, as NTFS may be mounted on
other platforms. The variable does default to on for Windows,
though.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not allow paths with a ".git" component to be added to
the index, as that would mean repository contents could
overwrite our repository files. However, asking "is this
path the same as .git" is not as simple as strcmp() on some
filesystems.
On NTFS (and FAT32), there exist so-called "short names" for
backwards-compatibility: 8.3 compliant names that refer to the same files
as their long names. As ".git" is not an 8.3 compliant name, a short name
is generated automatically, typically "git~1".
Depending on the Windows version, any combination of trailing spaces and
periods are ignored, too, so that both "git~1." and ".git." still refer
to the Git directory. The reason is that 8.3 stores file names shorter
than 8 characters with trailing spaces. So literally, it does not matter
for the short name whether it is padded with spaces or whether it is
shorter than 8 characters, it is considered to be the exact same.
The period is the separator between file name and file extension, and
again, an empty extension consists just of spaces in 8.3 format. So
technically, we would need only take care of the equivalent of this
regex:
(\.git {0,4}|git~1 {0,3})\. {0,3}
However, there are indications that at least some Windows versions might
be more lenient and accept arbitrary combinations of trailing spaces and
periods and strip them out. So we're playing it real safe here. Besides,
there can be little doubt about the intention behind using file names
matching even the more lenient pattern specified above, therefore we
should be fine with disallowing such patterns.
Extra care is taken to catch names such as '.\\.git\\booh' because the
backslash is marked as a directory separator only on Windows, and we want
to use this new helper function also in fsck on other platforms.
A big thank you goes to Ed Thomson and an unnamed Microsoft engineer for
the detailed analysis performed to come up with the corresponding fixes
for libgit2.
This commit adds a function to detect whether a given file name can refer
to the Git directory by mistake.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the index can block pathnames that case-fold to
".git" on HFS+, it would be helpful for fsck to notice such
problematic paths. This lets servers which use
receive.fsckObjects block them before the damage spreads.
Note that the fsck check is always on, even for systems
without core.protectHFS set. This is technically more
restrictive than we need to be, as a set of users on ext4
could happily use these odd filenames without caring about
HFS+.
However, on balance, it's helpful for all servers to block
these (because the paths can be used for mischief, and
servers which bother to fsck would want to stop the spread
whether they are on HFS+ themselves or not), and hardly
anybody will be affected (because the blocked names are
variants of .git with invisible Unicode code-points mixed
in, meaning mischief is almost certainly what the tree
author had in mind).
Ideally these would be controlled by a separate
"fsck.protectHFS" flag. However, it would be much nicer to
be able to enable/disable _any_ fsck flag individually, and
any scheme we choose should match such a system. Given the
likelihood of anybody using such a path in practice, it is
not unreasonable to wait until such a system materializes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for HFS+;
let's use it in verify_path.
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on HFS+. In practice
this probably doesn't matter, though, as the restricted
names are rather obscure and almost certainly would
never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectHFS config
option. Though this is expected to be most useful on OS X,
we allow it to be set everywhere, as HFS+ may be mounted on
other platforms. The variable does default to on for OS X,
though.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not allow paths with a ".git" component to be added to
the index, as that would mean repository contents could
overwrite our repository files. However, asking "is this
path the same as .git" is not as simple as strcmp() on some
filesystems.
HFS+'s case-folding does more than just fold uppercase into
lowercase (which we already handle with strcasecmp). It may
also skip past certain "ignored" Unicode code points, so
that (for example) ".gi\u200ct" is mapped ot ".git".
The full list of folds can be found in the tables at:
https://www.opensource.apple.com/source/xnu/xnu-1504.15.3/bsd/hfs/hfscommon/Unicode/UCStringCompareData.h
Implementing a full "is this path the same as that path"
comparison would require us importing the whole set of
tables. However, what we want to do is much simpler: we
only care about checking ".git". We know that 'G' is the
only thing that folds to 'g', and so on, so we really only
need to deal with the set of ignored code points, which is
much smaller.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We complain about ".git" in a tree because it cannot be
loaded into the index or checked out. Since we now also
reject ".GIT" case-insensitively, fsck should notice the
same, so that errors do not propagate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check that fsck notices and complains about confusing
paths in trees. However, there are a few shortcomings:
1. We check only for these paths as file entries, not as
intermediate paths (so ".git" and not ".git/foo").
2. We check "." and ".." together, so it is possible that
we notice only one and not the other.
3. We repeat a lot of boilerplate.
Let's use some loops to be more thorough in our testing, and
still end up with shorter code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not allow ".git" to enter into the index as a path
component, because checking out the result to the working
tree may causes confusion for subsequent git commands.
However, on case-insensitive file systems, ".Git" or ".GIT"
is the same. We should catch and prevent those, too.
Note that technically we could allow this for repos on
case-sensitive filesystems. But there's not much point. It's
unlikely that anybody cares, and it creates a repository
that is unexpectedly non-portable to other systems.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We should prevent nonsense paths from entering the index in
the first place, as they can cause confusing results if they
are ever checked out into the working tree. We already do
so, but we never tested it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When unpack_trees tries to write an entry to the index,
add_index_entry may report an error to stderr, but we ignore
its return value. This leads to us returning a successful
exit code for an operation that partially failed. Let's make
sure to propagate this code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GnuPG homedir is generated on the fly and keys are imported from
armored key file. Make comment match available key info and new key
generation procedure.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add --[no-]xmailer that allows a user to disable adding the 'X-Mailer:'
header to the email being sent.
Signed-off-by: Luis Henriques <henrix@camandro.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main hunk loop for add--interactive will loop if it does
not get a known input. This is a good thing if the user
typed some invalid input. However, if we have an
uncorrectable read error, we'll end up looping infinitely.
We can fix this by noticing read errors (i.e., <STDIN>
returns undef) and breaking out of the loop.
One easy way to trigger this is if you have an editor that
does not take over the terminal (e.g., one that spawns a
window in an existing process and waits), start the editor
with the hunk-edit command, and hit ^C to send SIGINT. The
editor process dies due to SIGINT, but the perl
add--interactive process does not (perl suspends SIGINT for
the duration of our system() call).
We return to the main loop, but further reads from stdin
don't work. The SIGINT _also_ killed our parent git process,
which orphans our process group, meaning that further reads
from the terminal will always fail. We loop infinitely,
getting EIO on each read.
Note that there are several other spots where we read from
stdin, too. However, in each of those cases, we do something
sane when the read returns undef (breaking out of the loop,
taking the input as "no", etc). They don't need similar
treatment.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation in the completion scripts for Bash and Zsh state the wrong filenames.
Signed-off-by: Peter van der Does <peter@avirtualhome.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The RFC says that they are to be concatenated after decoding (i.e. the
intervening whitespace is ignored).
Signed-off-by: Роман Донченко <dpb@corrigendum.ru>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More specifically:
* Add "\" to the list of characters not allowed in a token (see RFC 2047
errata).
* Share regexes between unquote_rfc2047 and is_rfc2047_quoted. Besides
removing duplication, this also makes unquote_rfc2047 more stringent.
* Allow both "q" and "Q" to identify the encoding.
* Allow lowercase hexadecimal digits in the "Q" encoding.
And, more on the cosmetic side:
* Change the "encoded-text" regex to exclude rather than include characters,
for clarity and consistency with "token".
Signed-off-by: Роман Донченко <dpb@corrigendum.ru>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The assume-unchanged bit can be misunderstood. Be assertive about
the expectation that file changes should update that flag.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function uses (non-local) $f to store the value of its first parameter.
This can interfere with the user's environment.
Signed-off-by: Justin Guenther <jguenther@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git 2.0 was supposed to make the "simple" mode for the default of
"git push", but it didn't.
* jk/push-simple:
push: truly use "simple" as default, not "upstream"
The build procedure did not bother fixing perl and python scripts
when NO_PERL and NO_PYTHON build-time configuration changed.
* jk/rebuild-perl-scripts-with-no-perl-seting-change:
Makefile: have python scripts depend on NO_PYTHON setting
Makefile: simplify by using SCRIPT_{PERL,SH}_GEN macros
Makefile: have perl scripts depend on NO_PERL setting
Some tests that depend on perl lacked PERL prerequisite to protect
them, breaking build with NO_PERL configuration.
* jk/no-perl-tests:
t960[34]: mark cvsimport tests as requiring perl
t0090: mark add-interactive test with PERL prerequisite
It is distracting to let the GPG message while setting up the test
gpghome leak into the test output, especially without running these
tests with "-v" option.
The splitting of RFC1991 prerequiste part is about future-proofing.
When we want to define other kinds of specific prerequisites in the
future, we'd prefer to see it done separately from the basic set-up
code.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Importing PGP key public and security ring works, but we do not have
all secret keys in one binary blob and all public keys in another.
Instead import public and secret keys for one key pair from a text
file that holds ASCII-armored export of them.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that expire_reflog() doesn't actually look in the
expire_reflog_policy_cb data structure, we can make it opaque:
* Change the callers of expire_reflog() to pass it a pointer to an
entire "struct expire_reflog_policy_cb" rather than a pointer to a
"struct cmd_reflog_expire_cb".
* Change expire_reflog() to accept the argument as a "void *" and
simply pass it through to the policy functions.
* Change the policy functions, reflog_expiry_prepare(),
reflog_expiry_cleanup(), and should_expire_reflog_ent(), to accept
"void *cb_data" arguments and cast them back to "struct
expire_reflog_policy_cb" internally.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The policy objects don't care about "--rewrite". So move it to
expire_reflog()'s flags parameter.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The policy objects don't care about "--verbose". So move it to
expire_reflog()'s flags parameter.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a flags field to "struct expire_reflog_cb", and pass the flags
argument through to expire_reflog_ent(). In a moment we will start
using it to pass through flags that expire_reflog_ent() needs.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new data type, "struct expire_reflog_cb", for holding the data
that expire_reflog() passes to expire_reflog_ent() via
for_each_reflog_ent(). For now it only holds a pointer to a "struct
expire_reflog_policy_cb", which still contains all of the actual data.
In future commits we will move some fields from the latter to the
former.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the first step towards separating the data needed by the
policy code from the data needed by the reflog expiration machinery.
(In a moment we will add a *new* "struct expire_reflog_cb" for the use
of expire_reflog() itself, then move fields selectively from
expire_reflog_policy_cb to expire_reflog_cb.)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The policy objects don't care about "--updateref". So move it to
expire_reflog()'s flags parameter.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The policy objects don't care about "--dry-run". So move it to
expire_reflog()'s flags parameter.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to separate the options relevant to the expiry machinery from
the options affecting the expiration policy. So add a "flags" argument
to expire_reflog() to hold the former.
The argument doesn't yet do anything.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract two functions, reflog_expiry_prepare() and
reflog_expiry_cleanup(), from expire_reflog(). This is a further step
towards separating the code for deciding on expiration policy from the
code that manages the physical deletion of reflog entries.
This change requires a couple of local variables from expire_reflog()
to be turned into fields of "struct expire_reflog_cb". More
reorganization of the callback data will follow in later commits.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract from expire_reflog_ent() a function that is solely responsible
for deciding whether a reflog entry should be expired. By separating
this "business logic" from the mechanics of actually expiring entries,
we are working towards the goal of encapsulating reflog expiry within
the refs API, with policy decided by a callback function passed to it
by its caller.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't actually need the locking functionality, because we already
hold the lock on the reference itself, which is how the reflog file is
locked. But the lock_file code can do some of the bookkeeping for us,
and it is more careful than the old code here was. For example:
* It correctly handles the case that the reflog lock file already
exists for some reason or cannot be opened.
* It correctly cleans up the lockfile if the program dies.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is very little cleanup needed if the reference has no reflog. If
we move the initialization of log_file down a bit, there's even less.
So instead of jumping to the cleanup code at the end of the function,
just do the cleanup and return inline.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to v1.5.4~14, expire_reflog() had to be an each_ref_fn because
it was passed to for_each_reflog(). Since then, there has been no
reason for it to implement the each_ref_fn interface. So...
* Remove the "unused" parameter (which took the place of "flags", but
was really unused).
* Declare the last parameter to be (struct cmd_reflog_expire_cb *)
rather than (void *).
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Break out the code to create the string and writing it to the file
descriptor from log_ref_write and add it into a dedicated function
log_ref_write_fd. It is a nice unit of work.
For now this is only used from log_ref_write, but in the future it
might have other callers.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call strbuf_complete_line() instead of open-coding it. Also remove
surrounding comments indicating the intent to complete a line since
this information is already included in the function name.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GnuPG >= 2.1.0 no longer supports RFC1991, so skip these tests.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GnuPG 2.1 homedir looks different, so just create it on the fly by
importing needed private and public keys and ownertrust.
This solves an issue with gnupg 2.1 running interactive pinentry
when old secret key is present.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To figure out the author ident for a commit, we call
determine_author_info(). This function collects information
from the environment, other commits (in the case of
"--amend" or "-c/-C"), and the "--author" option. It then
uses fmt_ident to generate the final ident string that goes
into the commit object. fmt_ident is therefore responsible
for any quality or validation checks on what is allowed to
go into a commit.
Before returning, though, we call split_ident_line on the
result, and feed the individual components to hooks via the
GIT_AUTHOR_* variables. Furthermore, we do extra validation
by feeding the split to sane_ident_split(), which is pickier
than fmt_ident (in particular, it will complain about an empty
email field). If this parsing or validation fails, we skip
updating the environment variables.
This is bad, because it means that hooks may silently see a
different ident than what we are putting into the commit. We
should drop the extra sane_ident_split checks entirely, and
take whatever fmt_ident has fed us (and what will go into
the commit object).
If parsing fails, we should actually abort here rather than
continuing (and feeding the hooks bogus data). However,
split_ident_line should never fail here. The ident was just
generated by fmt_ident, so we know that it's sane. We can
use assert_split_ident to double-check this.
Note that we also teach that assertion to check that we
found a date (it always should, but until now, no caller
cared whether we found a date or not). Checking the return
value of sane_ident_split is enough to ensure we have the
name/email pointers set, and checking date_begin is enough
to know that all of the date/tz variables are set.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we generate the commit-message template, we try to
report an author or committer ident that will be of interest
to the user: an author that does not match the committer, or
a committer that was auto-configured.
When doing so, if we encounter what we consider to be a
bogus ident, we immediately die. This is a bad idea, because
our use of the idents here is purely informational. Any
ident rules should be enforced elsewhere, because commits
that do not invoke the editor will not even hit this code
path (e.g., "git commit -mfoo" would work, but "git commit"
would not). So at best, we are redundant with other checks,
and at worse, we actively prevent commits that should
otherwise be allowed.
We should therefore do the minimal parsing we can to get a
value and not do any validation (i.e., drop the call to
sane_ident_split()).
In theory we could notice when even our minimal parsing
fails to work, and do the sane thing for each check (e.g.,
if we have an author but can't parse the committer, assume
they are different and print the author). But we can
actually simplify this even further.
We know that the author and committer strings we are parsing
have been generated by us earlier in the program, and
therefore they must be parseable. We could just call
split_ident_line without even checking its return value,
knowing that it will put _something_ in the name/mail
fields. Of course, to protect ourselves against future
changes to the code, it makes sense to turn this into an
assert, so we are not surprised if our assumption fails.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git is compiled with "-fsanitize=address" (using clang
or gcc >= 4.8), all invocations of git will check for buffer
overflows. This is similar to running with valgrind, except
that it is more thorough (because of the compiler support,
function-local buffers can be checked, too) and runs much
faster (making it much less painful to run the whole test
suite with the checks turned on).
Unlike valgrind, the magic happens at compile-time, so we
don't need the same infrastructure in the test suite that we
did to support --valgrind. But there are two things we can
help with:
1. On some platforms, the leak-detector is on by default,
and causes every invocation of "git init" (and thus
every test script) to fail. Since running git with
the leak detector is pointless, let's shut it off
automatically in the tests, unless the user has already
configured it.
2. When apache runs a CGI, it clears the environment of
unknown variables. This means that the $ASAN_OPTIONS
config doesn't make it to git-http-backend, and it
dies due to the leak detector. Let's mark the variable
as OK for apache to pass.
With these two changes, running
make CC=clang CFLAGS=-fsanitize=address test
works out of the box.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If "git update-ref --stdin" was given a "verify" command with no
"<newvalue>" at all (not even zeros), the code was mistakenly setting
have_old=0 (and leaving old_sha1 uninitialized). But this is
incorrect: this command is supposed to verify that the reference
doesn't exist. So in this case we really need old_sha1 to be set to
null_sha1 and have_old to be set to 1.
Moreover, since have_old was being set to zero, *no* check of the old
value was being done, so the new value of the reference was being set
unconditionally to the value in new_sha1. new_sha1, in turn, was set
to null_sha1 in the expectation that that was the old value and it
shouldn't be changed. But because the precondition was not being
checked, the result was that the reference was being deleted
unconditionally.
So, if <oldvalue> is missing, set have_old unconditionally and set
old_sha1 to null_sha1.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two of the tests fail because
verify refs/heads/foo
with no argument (not even zeros) actually *deletes* refs/heads/foo.
This problem will be fixed in the next commit.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During 'rebase -i', one wrong edit in a long rebase session
might inadvertently drop commits/items. This change shows
the total number of TODO items in the comments after the
list. After performing the rebase edit, total item counts
can be compared to make sure that no changes have been lost
in the edit.
Signed-off-by: Onno Kortmann <onno@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we send out pkt-lines with refnames, we use a static
1000-byte buffer. This means that the maximum size of a ref
over the git protocol is around 950 bytes (the exact size
depends on the protocol line being written, but figure on a sha1
plus some boilerplate).
This is enough for any sane workflow, but occasionally odd
things happen (e.g., a bug may create a ref "foo/foo/foo/..."
accidentally). With the current code, you cannot even use
"push" to delete such a ref from a remote.
Let's switch to using a strbuf, with a hard-limit of
LARGE_PACKET_MAX (which is specified by the protocol). This
matches the size of the readers, as of 74543a0 (pkt-line:
provide a LARGE_PACKET_MAX static buffer, 2013-02-20).
Versions of git older than that will complain about our
large packets, but it's really no worse than the current
behavior. Right now the sender barfs with "impossibly long
line" trying to send the packet, and afterwards the reader
will barf with "protocol error: bad line length %d", which
is arguably better anyway.
Note that we're not really _solving_ the problem here, but
just bumping the limits. In theory, the length of a ref is
unbounded, and pkt-line can only represent sizes up to
65531 bytes. So we are just bumping the limit, not removing
it. But hopefully 64K should be enough for anyone.
As a bonus, by using a strbuf for the formatting we can
eliminate an unnecessary copy in format_buf_write.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to recognize the packed-refs header and skip to the
"traits" part of the line. We currently do it by feeding
sizeof() a static const array to strncmp. However, it's a
bit simpler to just skip_prefix, which expresses the
intention more directly, and without remembering to account
for the NUL-terminator in each sizeof() call.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have a strbuf in read_packed_refs, we can pass
it straight to the line parser, which saves us an extra
strlen.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current code uses a fixed PATH_MAX-sized buffer for reading
packed-refs lines. This is a reasonable guess, in the sense
that git generally cannot work with refs larger than
PATH_MAX. However, there are a few cases where it is not
great:
1. Some systems may have a low value of PATH_MAX, but can
actually handle larger paths in practice. Fixing this
code path probably isn't enough to make them work
completely with long refs, but it is a step in the
right direction.
2. We use fgets, which will happily give us half a line on
the first read, and then the rest of the line on the
second. This is probably OK in practice, because our
refline parser is careful enough to look for the
trailing newline on the first line. The second line may
look like a peeled line to us, but since "^" is illegal
in refnames, it is not likely to come up.
Still, it does not hurt to be more careful.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
-f/--force is the standard way to force an action, and is used by branch
for the recreation of existing branches, but not for deleting unmerged
branches nor for renaming to an existing branch.
Make "-m -f" equivalent to "-M" and "-d -f" equivalent to" -D", i.e.
allow -f/--force to be used with -m/-d also.
For the list modes, "-f" is simply ignored.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 695d95d (parse_color: refactor color storage,
2014-11-20) introduced two macros, COLOR_FOREGROUND and
COLOR_BACKGROUND. The latter conflicts with a system macro
defined on Windows, breaking compilation there.
The simplest solution is to just get rid of these macros
entirely. They are constants that are only used in one place
(since the whole point of 695d95d was to avoid repeating
ourselves). Their main function is to make the magic
character constants more readable, but we can do the same
thing with a comment.
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-update-index --assume-unchanged was never meant to ignore changes
to tracked files (only to spare some stats). So do not suggest it
as a means to achieve that.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many users misunderstand the --assume-unchanged contract, believing
it means Git won't look at the flagged file.
Be explicit that the --assume-unchanged contract is by the user that
they will NOT change the file so that Git does not need to look (and
expend, for example, lstat(2) cycles)
Mentioning "Git stops checking" does not help the reader, as it is
only one possible consequence of what that assumption allows Git to
do, but
(1) there are things other than "stop checking" that Git can do
based on that assumption; and
(2) Git is not obliged to stop checking; it merely is allowed to.
Also, this is a single flag bit, correct the plural to singular, and
the verb, accordingly.
Drop the stale and incorrect information about "poor-man's ignore",
which is not what this flag bit is about at all.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change allows git-svn to support setting subversion properties.
It is useful for manually setting properties when committing to a
subversion repo that *requires* properties to be set without requiring
moving your changeset to separate subversion checkout in order to
set props.
This change is initially from David Fraser, appearing at:
http://mid.gmane.org/1927112650.1281253084529659.JavaMail.root@klofta.sjsoft.com>
They are now forward-ported to most recent git along with fixes to
deal with files in subdirectories.
Style and functional changes from Eric Wong have been taken
in their entirety from:
http://mid.gmane.org/20141201094911.GA13931@dcvr.yhbt.net
There is a nit to point out: the code does not support
adding props unless there are also content changes to the files as
well. This is demonstrated in the testcase.
[ew - simplify Git.pm usage for check-attr
- improve shell portability for tests
- minor phrasing changes in commit message]
Signed-off-by: David Fraser <davidf@sjsoft.com>
Signed-off-by: Alfred Perlstein <alfred@freebsd.org>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
At least on this developer's MacOSX (Snow Leopard, gcc-4.2.1), GCC
prints a warning that 'hash' may be used uninitialized when
compiling test-hashmap that 'hash' may be used uninitialized (but
GCC 4.6.3 on this developer's Ubuntu server does not report this
problem).
The old compiler is wrong, of course, as the switch (method & 3)
statement already handles all the possible cases, but that does not
help in a scenario where it is hard or impossible to upgrade to a
newer compiler (e.g. being stuck on an older MacOSX and having to
rely on Xcode).
So let's just initialize the variable and be done with it, it is
hardly a crucial part of the code because it is only used by the
test suite and invisible to the end users.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have some tricky checks in fsck that rely on a side effect of
require_end_of_header(), and would otherwise easily run outside
non-NUL-terminated buffers. This is a bit brittle, so let's make sure
that only NUL-terminated buffers are passed around to begin with.
Jeff "Peff" King contributed the detailed analysis which call paths are
involved and pointed out that we also have to patch the get_data()
function in unpack-objects.c, which is what Johannes "Dscho" Schindelin
implemented.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Analyzed-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we detect an invalid tag-name header in a tag object,
like, "tag foo bar\n", we feed the pointer starting at "foo
bar" to a printf "%s" formatter. This shows the name, as we
want, but then it keeps printing the rest of the tag buffer,
rather than stopping at the end of the line.
Our tests did not notice because they look only for the
matching line, but the bug is that we print much more than
we wanted to. So we also adjust the test to be more exact.
Note that when fscking tags with "index-pack --strict", this
is even worse. index-pack does not add a trailing
NUL-terminator after the object, so we may actually read
past the buffer and print uninitialized memory. Running
t5302 with valgrind does notice the bug for that reason.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on the file content, eol parameters and .gitattributes
"git add" may give a warning when the eol of a file will change when
the file is checked out again.
There are 2 different warnings, either "CRLF will be replaced..." or
"LF will be replaced...". Let t0027 check for these warnings by
adding new parameters to create_file_in_repo(), which tells what
warnings are expected.
When a file has eol=lf or eol=crlf in .gitattributes, it is handled
as text and should be normalized. Add tests for these cases that
were not covered.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A request to store an empty note via "git notes" meant to remove
note from the object but with --allow-empty we will store a (surprise!)
note that is empty. In the longer run, we might want to deprecate
the somewhat unintuitive "emptying means deletion" behaviour.
* jh/empty-notes:
t3301: modernize style
notes: empty notes should be shown by 'git log'
builtin/notes: add --allow-empty, to allow storing empty notes
builtin/notes: split create_note() to clarify add vs. remove logic
builtin/notes: simplify early exit code in add()
builtin/notes: refactor note file path into struct note_data
builtin/notes: improve naming
t3301: verify that 'git notes' removes empty notes by default
builtin/notes: fix premature failure when trying to add the empty blob
"git checkout $treeish $path", when $path in the index and the
working tree already matched what is in $treeish at the $path,
still overwrote the $path unnecessarily.
* jk/checkout-from-tree:
checkout $tree: do not throw away unchanged index entries
Allow passing extra set of arguments when ssh is invoked to create
an encrypted & authenticated connection by introducing a new environment
variable GIT_SSH_COMMAND, whose contents is interpreted by shells.
This is not possible with existing GIT_SSH mechanism whose
invocation bypasses shells, which was designed more to match what
other programs with similar variables did, not necessarily to be
more useful.
* tq/git-ssh-command:
git_connect: set ssh shell command in GIT_SSH_COMMAND
Our loop should always process all lines, even if we hit the
beginning of the file. We have a conditional after the loop
ends to double-check that there is nothing left and to
process it. But this should never happen, and is a sign of a
logic bug in the loop. Let's turn it into a BUG assertion.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we read a reflog file in reverse, we read whole chunks
of BUFSIZ bytes, then loop over the buffer, parsing any
lines we find. We find the beginning of each line by looking
for the newline from the previous line. If we don't find
one, we know that we are either at the beginning of
the file, or that we have to read another block.
In the latter case, we stuff away what we have into a
strbuf, read another block, and continue our parse. But we
missed one case here. If we did find a newline, and it is at
the beginning of the block, we must also stuff that newline
into the strbuf, as it belongs to the block we are about to
read.
The minimal fix here would be to add this special case to
the conditional that checks whether we found a newline.
But we can make the flow a little clearer by rearranging a
bit: we first handle lines that we are going to show, and
then at the end of each loop, stuff away any leftovers if
necessary. That lets us fold this special-case in with the
more common "we ended in the middle of a line" case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref_transaction_update function can already be used to create refs by
passing null_sha1 as the old_sha1 parameter. Simplify by replacing
transaction_create with a thin wrapper.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No functional changes intended. This commit makes use of higher level
and better documented functions of the string list API, so the code is
more understandable.
Note that also the required computational amount should not change
in principal as we need to look up the item no matter if it is already
part of the list or not. Once looked up, insertion comes for free.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, check-ignore does not list tracked files at all since
they are not subject to ignore patterns.
Make this clearer in the man page.
Reported-by: Guilherme <guibufolo@gmail.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add completion for git-tag options including
all options that are currently shown in "git tag -h".
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds simple wrapper functions around calls to stat(), fstat(),
and lstat() that translate the operating system's native file type
bits to those used by most operating systems. It also rewrites the
S_IF* macros to the common values, so all file type processing is
performed using the translated modes. This makes projects portable
across operating systems that use different file type definitions.
Only the file type bits may be affected by these compatibility
functions; the file permission bits are assumed to be 07777 and are
passed through unchanged.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you run git as part of an automated system, you might
prefer git to die rather than try to issue a prompt on the
terminal (because there would be nobody to see it and
respond, and the process would hang forever).
This usually works out of the box because getpass() (and our
more featureful replacements) will fail when there is no
tty, but this does not cover all cases. For example, a batch
system run via ssh might have a tty, even when the user does
not expect it.
Let's provide an environment variable the user can set to
avoid even trying to touch the tty at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are trying to fill a credential, we loop over the
set of defined credential-helpers, then fall back to running
askpass, and then finally prompt on the terminal. Helpers
which cannot find a credential are free to tell us nothing,
but they cannot currently ask us to stop prompting.
This patch lets them provide a "quit" attribute, which asks
us to stop the process entirely (avoiding running more
helpers, as well as the askpass/terminal prompt).
This has a few possible uses:
1. A helper which prompts the user itself (e.g., in a
dialog) can provide a "cancel" button to the user to
stop further prompts.
2. Some helpers may know that prompting cannot possibly
work. For example, if their role is to broker a ticket
from an external auth system and that auth system
cannot be contacted, there is no point in continuing
(we need a ticket to authenticate, and the user cannot
provide one by typing it in).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow new workdirs to be created in an empty directory (similar to "git
clone"). Provide more error checking and clean up on failure.
Signed-off-by: Paul Smith <paul@mad-scientist.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep the "there is nothing to update in a bare repository", "when
the check and update process runs, here are the GIT_DIR and
GIT_WORK_TREE" logic, which will be common regardless of how the
decision to update and the actual update are done, in the original
update_worktree() function, and split out the "working tree and
the index must match the original HEAD exactly" and "use two-way
read-tree to update the working tree" into a new push_to_deploy()
helper function. This will allow customizing the logic more cleanly
and easily.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use <<-\END_OF_HERE_DOCUMENT to allow indenting the HERE document to
make it clear where each test begins and ends, and relieve readers
from having to worry about variable substitution.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-tree uses read_tree_recursive() which already does path filtering
using pathspec. No need to filter one more time based on prefix
only. "ls-tree ../somewhere" does not work because of
this. write_name_quotedpfx() can now be retired because nobody else
uses it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows the callback to use 'base' as a temporary buffer to
quickly assemble full path "without" extra allocation. The callback
has to restore it afterwards of course.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each working directory of main repository has its own working directory
of submodule, and in most cases they should be checked out to different
revisions. So they should be separated.
It looks logical to make submodule instances in different working
directories to reuse the submodule directory in the common dir of
the main repository, and probably this is how "checkout --to" should
initialize them called on the main repository, but they also should work
fine being completely separated clones.
Testfile t7410-submodule-checkout-to.sh demostrates the behavior.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Non-recursive checkout creates empty directpries in place of submodules.
If then I try to "checkout --to" submodules there, it refuses to do so,
because directory already exists.
Fix by allowing checking out to empty directory. Add test and modify the
existing one so that it uses non-empty directory.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For normal use cases, it does not make sense for 'checkout' to work on
a bare repository, without a worktree. But "checkout --to" is an
exception because it _creates_ a new worktree. Allow this option to
run on bare repositories.
People who check out from a bare repository should remember that
core.logallrefupdates is off by default and it should be turned back
on. `--to` cannot do this automatically behind the user's back because
some user may deliberately want no reflog.
For people interested in repository setup/discovery code,
is_bare_repository_cfg (aka "core.bare") is unchanged by this patch,
which means 'true' by default for bare repos. Fortunately when we get
the repo through a linked checkout, is_bare_repository_cfg is never
used. So all is still good.
[nd: commit message]
Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently git_path("info/sparse-checkout") resolves to
$GIT_COMMON_DIR/info/sparse-checkout in multiple worktree mode. It
makes more sense for the sparse checkout patterns to be per worktree,
so you can have multiple checkouts with different parts of the tree.
With this, "git checkout --to <new>" on a sparse checkout will create
<new> as a full checkout. Which is expected, it's how a new checkout
is made. The user can reshape the worktree afterwards.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In linked checkouts, borrowed parts like config is taken from
$GIT_COMMON_DIR. $GIT_DIR/config is never used. Report them as
garbage.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One branch obviously can't be checked out at two places (but detached
heads are ok). Give the user a choice in this case: --detach, -b
new-branch, switch branch in the other checkout first or simply 'cd'
and continue to work there.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
(alias R=$GIT_COMMON_DIR/worktrees/<id>)
- linked checkouts are supposed to keep its location in $R/gitdir up
to date. The use case is auto fixup after a manual checkout move.
- linked checkouts are supposed to update mtime of $R/gitdir. If
$R/gitdir's mtime is older than a limit, and it points to nowhere,
worktrees/<id> is to be pruned.
- If $R/locked exists, worktrees/<id> is not supposed to be pruned. If
$R/locked exists and $R/gitdir's mtime is older than a really long
limit, warn about old unused repo.
- "git checkout --to" is supposed to make a hard link named $R/link
pointing to the .git file on supported file systems to help detect
the user manually deleting the checkout. If $R/link exists and its
link count is greated than 1, the repo is kept.
Helped-by: Marc Branchaud <marcnarc@xiplink.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout --to" sets up a new working directory with a .git file
pointing to $GIT_DIR/worktrees/<id>. It then executes "git checkout"
again on the new worktree with the same arguments except "--to" is
taken out. The second checkout execution, which is not contaminated
with any info from the current repository, will actually check out and
everything that normal "git checkout" does.
Helped-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes common problems in these code about error handling,
forgetting to close the file handle after fprintf() fails, or not
printing out the error string..
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The repo setup procedure is updated to detect $GIT_DIR/commondir and
set $GIT_COMMON_DIR properly.
The core.worktree is ignored when $GIT_COMMON_DIR is set. This is
because the config file is shared in multi-checkout setup, but
checkout directories _are_ different. Making core.worktree effective
in all checkouts mean it's back to a single checkout.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the file "$GIT_DIR/commondir" exists, it contains the value of
$GIT_COMMON_DIR.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If $GIT_COMMON_DIR is set, it should be $GIT_COMMON_DIR/hooks/, not
$GIT_DIR/hooks/. Just let rev-parse --git-path handle it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If $GIT_COMMON_DIR is set, $GIT_OBJECT_DIRECTORY should be
$GIT_COMMON_DIR/objects, not $GIT_DIR/objects. Just let rev-parse
--git-path handle it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable is intended to support multiple working directories
attached to a repository. Such a repository may have a main working
directory, created by either "git init" or "git clone" and one or more
linked working directories. These working directories and the main
repository share the same repository directory.
In linked working directories, $GIT_COMMON_DIR must be defined to point
to the real repository directory and $GIT_DIR points to an unused
subdirectory inside $GIT_COMMON_DIR. File locations inside the
repository are reorganized from the linked worktree view point:
- worktree-specific such as HEAD, logs/HEAD, index, other top-level
refs and unrecognized files are from $GIT_DIR.
- the rest like objects, refs, info, hooks, packed-refs, shallow...
are from $GIT_COMMON_DIR (except info/sparse-checkout, but that's
a separate patch)
Scripts are supposed to retrieve paths in $GIT_DIR with "git rev-parse
--git-path", which will take care of "$GIT_DIR vs $GIT_COMMON_DIR"
business.
The redirection is done by git_path(), git_pathdup() and
strbuf_git_path(). The selected list of paths goes to $GIT_COMMON_DIR,
not the other way around in case a developer adds a new
worktree-specific file and it's accidentally promoted to be shared
across repositories (this includes unknown files added by third party
commands)
The list of known files that belong to $GIT_DIR are:
ADD_EDIT.patch BISECT_ANCESTORS_OK BISECT_EXPECTED_REV BISECT_LOG
BISECT_NAMES CHERRY_PICK_HEAD COMMIT_MSG FETCH_HEAD HEAD MERGE_HEAD
MERGE_MODE MERGE_RR NOTES_EDITMSG NOTES_MERGE_WORKTREE ORIG_HEAD
REVERT_HEAD SQUASH_MSG TAG_EDITMSG fast_import_crash_* logs/HEAD
next-index-* rebase-apply rebase-merge rsync-refs-* sequencer/*
shallow_*
Path mapping is NOT done for git_path_submodule(). Multi-checkouts are
not supported as submodules.
Helped-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows git_path() to redirect info/fast-import to another place
if needed
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Among pathnames in $GIT_DIR, e.g. "index" or "packed-refs", we want to
automatically and silently map some of them to the $GIT_DIR of the
repository we are borrowing from via $GIT_COMMON_DIR mechanism. When
we formulate the pathname for its lockfile, we want it to be in the
same location as its final destination. "index" is not shared and
needs to remain in the borrowing repository, while "packed-refs" is
shared and needs to go to the borrowed repository.
git_path() could be taught about the ".lock" suffix and map
"index.lock" and "packed-refs.lock" the same way their basenames are
mapped, but instead the caller can help by asking where the basename
(e.g. "index") is mapped to git_path() and then appending ".lock"
after the mapping is done.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We allow the user to relocate certain paths out of $GIT_DIR via
environment variables, e.g. GIT_OBJECT_DIRECTORY, GIT_INDEX_FILE and
GIT_GRAFT_FILE. Callers are not supposed to use git_path() or
git_pathdup() to get those paths. Instead they must use
get_object_directory(), get_index_file() and get_graft_file()
respectively. This is inconvenient and could be missed in review (for
example, there's git_path("objects/info/alternates") somewhere in
sha1_file.c).
This patch makes git_path() and git_pathdup() understand those
environment variables. So if you set GIT_OBJECT_DIRECTORY to /foo/bar,
git_path("objects/abc") should return /foo/bar/abc. The same is done
for the two remaining env variables.
"git rev-parse --git-path" is the wrapper for script use.
This patch kinda reverts a0279e1 (setup_git_env: use git_pathdup
instead of xmalloc + sprintf - 2014-06-19) because using git_pathdup
here would result in infinite recursion:
setup_git_env() -> git_pathdup("objects") -> .. -> adjust_git_path()
-> get_object_directory() -> oops, git_object_directory is NOT set
yet -> setup_git_env()
I wanted to make git_pathdup_literal() that skips adjust_git_path().
But that won't work because later on when $GIT_COMMON_DIR is
introduced, git_pathdup_literal("objects") needs adjust_git_path() to
replace $GIT_DIR with $GIT_COMMON_DIR.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name vsnpath() gives an impression that this is general path
handling function. It's not. This is the underlying implementation of
git_path(), git_pathdup() and strbuf_git_path() which will prefix
$GIT_DIR in the result string.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous patch, git_snpath() is modified to allocate a new
strbuf buffer because vsnpath() needs that. But that makes it
awkward because git_snpath() receives a pre-allocated buffer from
outside and has to copy data back. Rename it to strbuf_git_path()
and make it receive strbuf directly.
Using git_path() in update_refs_for_switch() which used to call
git_snpath() is safe because that function and all of its callers do
not keep any pointer to the round-robin buffer pool allocated by
get_pathname().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before the previous commit, get_pathname returns an array of PATH_MAX
length. Even if git_path() and similar functions does not use the
whole array, git_path() caller can, in theory.
After the commit, get_pathname() may return a buffer that has just
enough room for the returned string and git_path() caller should never
write beyond that.
Make git_path(), mkpath() and git_path_submodule() return a const
buffer to make sure callers do not write in it at all.
This could have been part of the previous commit, but the "const"
conversion is too much distraction from the core changes in path.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We've been avoiding PATH_MAX whenever possible. This patch makes
get_pathname() return a strbuf and updates the callers to take
advantage of this. The code is simplified as we no longer need to
worry about buffer overflow.
vsnpath() behavior is changed slightly: previously it always clears
the buffer before writing, now it just appends. Fortunately this is a
static function and all of its callers prepare the buffer properly:
git_path() gets the buffer from get_pathname() which resets the
buffer, the remaining call sites start with STRBUF_INIT'd buffer.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was originally meant to be used to rewrite run_commit_hook()
that only special cases the GIT_INDEX_FILE environment, but the
run_hook_ve() refactoring done earlier made the implementation of
run_commit_hook() thin and clean enough.
Nobody uses this, so retire it as an unfinished clean-up made
unnecessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tcl is conventionally spelled "Tcl". The description of
option "--tcl", however, spells it "tcl". Let's follow
the convention.
Reported-by: Hartmut Henkel <hartmut_henkel@gmx.de>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit baa37bff ("mv: allow renaming to fix case on case
insensitive filesystems", 08-05-2014), the 'git mv' command has
been able to rename a file, to one which differs only in case,
on a case insensitive filesystem.
This results in the 'rename (case change)' test, which used to fail
prior to this commit, to now (unexpectedly) pass. Mark this test as
passing.
[jc: Ramsay's tests on Cygwin, Eric's on Mac OS X]
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Tested-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plan for the push.default transition had all along been
to use the "simple" method rather than "upstream" as a
default if the user did not specify their own push.default
value. Commit 11037ee (push: switch default from "matching"
to "simple", 2013-01-04) tried to implement that by moving
PUSH_DEFAULT_UNSPECIFIED in our switch statement to
fall-through to the PUSH_DEFAULT_SIMPLE case.
When the commit that became 11037ee was originally written,
that would have been enough. We would fall through to
calling setup_push_upstream() with the "simple" parameter
set to 1. However, it was delayed for a while until we were
ready to make the transition in Git 2.0.
And in the meantime, commit ed2b182 (push: change `simple`
to accommodate triangular workflows, 2013-06-19) threw a
monkey wrench into the works. That commit drops the "simple"
parameter to setup_push_upstream, and instead checks whether
the global "push_default" is PUSH_DEFAULT_SIMPLE. This is
right when the user has explicitly configured push.default
to simple, but wrong when we are a fall-through for the
"unspecified" case.
We never noticed because our push.default tests do not cover
the case of the variable being totally unset; they only
check the "simple" behavior itself.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "__attribute__" flag may be a noop on some compilers.
That's OK as long as the code is correct without the
attribute, but in this case it is not. We would typically
end up with a struct that is 2 bytes too long due to struct
padding, breaking both reading and writing of bitmaps.
Instead of marshalling the data in a struct, let's just
provide helpers for reading and writing the appropriate
types. Besides being correct on all platforms, the result is
more efficient and simpler to read.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous one tests only the case where a path to be updated by
the push-to-deploy has an incompatible change in the target's
working tree that has already been added to the index, but the
feature itself wants to require the working tree to be a lot cleaner
than what is tested. Add a handful more tests to protect the
feature from future changes that mistakenly (from the viewpoint of
the inventor of the feature) loosens the cleanliness requirement,
namely:
- A change only to the working tree but not to the index is still a
change to be protected;
- An untracked file in the working tree that would be overwritten
by a push-to-deploy needs to be protected;
- A change that happens to make a file identical to what is being
pushed is still a change to be protected (i.e. the feature's
cleanliness requirement is more strict than that of checkout).
Also, test that a stat-only change to the working tree is not a
reason to reject a push-to-deploy.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When synchronizing between working directories, it can be handy to update
the current branch via 'push' rather than 'pull', e.g. when pushing a fix
from inside a VM, or when pushing a fix made on a user's machine (where
the developer is not at liberty to install an ssh daemon let alone know
the user's password).
The common workaround – pushing into a temporary branch and then merging
on the other machine – is no longer necessary with this patch.
The new option is:
'updateInstead':
Update the working tree accordingly, but refuse to do so if there
are any uncommitted changes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function sometimes returns a newly allocated string and
sometimes returns a borrowed string, the latter of which the callers
must not free(). The existing callers all assume that the return
value belongs to the callee and most of them copy it with strdup()
when they want to keep it around. They end up leaking the returned
copy when the callee returned a new string because they cannot tell
if they should free it.
Change the contract between the callers and system_path() to make
the returned string owned by the callers; they are responsible for
freeing it when done, but they do not have to make their own copy to
store it away.
Adjust the callers to make sure they do not leak the returned string
once they are done, but do not bother freeing it just before dying,
exiting or exec'ing other program to avoid unnecessary churn.
Reported-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An example where this happens is when doing an ls-tree on a tree that
contains a commit link. In that case, find_unique_abbrev is called
to get a non-abbreviated hex sha1, but still, a lookup is done as
to whether the sha1 is in the repository (which ends up looking for
a loose object in .git/objects), while the result of that lookup is
not used when returning a non-abbreviated hex sha1.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parse the option and pass it directly to git-mailinfo.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option adds the content of the Message-Id header at the end of the
commit message prepared by git-mailinfo. This is useful in order to
associate commit messages automatically with mailing list discussions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two general shell script codingstyles around here-text.
- Quote the <<\END_OF_HERE_TEXT string when there is no parameter
substitution going on to reduce cognitive load of the reader.
- Indent the text with <<-\END_OF_HERE_TEXT when able to make it
easier to spot boundaries of the tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two general shell script codingstyles.
- No SP between redirection operator and its target
- One SP on both sides of () in "name () {" that begins a shell function
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use write_script. The resulting patch makes it a lot easier
to understand what the written script is doing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The thread at http://thread.gmane.org/gmane.comp.version-control.git/257392
details problems when applying patches with "git am" in a repository with
CRLF line endings. In the example in the thread, the repository originated
from "git-svn" so it is not possible to use core.eol and friends on it.
Right now, the best option is to use "git am --keep-cr". However, when
a patch create new files, the patch application process will reject the
new file because it finds a "/dev/null\r" string instead of "/dev/null".
The problem is that SMTP transport is CRLF-unsafe. Sending a patch by
email is the same as passing it through "dos2unix | unix2dos". The newly
introduced CRLFs are normally transparent because git-am strips them. The
keepcr=true setting preserves them, but it is mostly working by chance
and it would be very problematic to have a "git am" workflow in a
repository with mixed LF and CRLF line endings.
The MIME solution to this is the quoted-printable transfer enconding.
This is not something that we want to enable by default, since it makes
received emails horrible to look at. However, it is a very good match
for projects that store CRLF line endings in the repository.
The only disadvantage of quoted-printable is that quoted-printable
patches fail to apply if the maintainer uses "git am --keep-cr". This
is because the decoded patch will have two carriage returns at the end
of the line. Therefore, add support for base64 transfer encoding too,
which makes received emails downright impossible to look at outside
a MUA, but really just works.
The patch covers all bases, including users that still live in the late
80s, by also providing a 7bit content transfer encoding that refuses
to send emails with non-ASCII character in them. And finally, "8bit"
will add a Content-Transfer-Encoding header but otherwise do nothing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the next patch, git-send-email will sometimes modify
existing Content-Transfer-Encoding headers. Delay the addition
of the header to @xh until just before sending. Do the same
for MIME-Version, to avoid adding it twice.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new name is more consistent with the names of other
string_list-related functions.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Iterate over refs_to_prune using for_each_string_list_item() rather
than writing out the loop in longhand.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename "delete_refs_list" to "refs_to_prune". The new name is more
self-explanatory.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the callers have string_lists available already, whereas two
of them had to read data out of a string_list into an array of strings
just to call this function. So change repack_without_refs() to take
the list of refnames to omit as a string_list, and change the callers
accordingly.
Suggested-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inserting items into a list in sorted order is O(N^2) whereas
appending them unsorted and then sorting the list all at once is
O(N lg N).
string_list_insert() also removes duplicates, and this change loses
that functionality. But the strings in this list, which ultimately
come from a for_each_ref() iteration, cannot contain duplicates.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also free them together at the end of the function.
In a moment, the array version will become redundant. Managing them
together makes later steps more obvious.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aside from making the logic clearer, this avoids a call to
warn_dangling_symrefs(), which always does a for_each_rawref()
iteration.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calling basename on a argument that starts with a dash, like a login
shell, will result in an error. Add '--' before the argument so that
the argument is interpreted properly.
Signed-off-by: Dan Wyand <danwyand@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent update to the gcc compiler (v4.8.3-5 x86_64) on 64-bit
cygwin leads to several new warnings about the implicit declaration
of the memmem(), strlcpy() and strcasestr() functions. For example:
CC archive.o
archive.c: In function 'format_subst':
archive.c:44:3: warning: implicit declaration of function 'memmem' \
[-Wimplicit-function-declaration]
b = memmem(src, len, "$Format:", 8);
^
archive.c:44:5: warning: assignment makes pointer from integer \
without a cast [enabled by default]
b = memmem(src, len, "$Format:", 8);
^
This is because <string.h> on Cygwin used to always declare the
above functions, but a recent version of it no longer make them
visible when _XOPEN_SOURCE is set (even if _GNU_SOURCE and
_BSD_SOURCE is set).
In order to suppress the warnings, don't define the _XOPEN_SOURCE
macro on cygwin.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In their effort to emulate POSIX as close as possible, the MSYS tools
and Cygwin treat the file name "foo.exe" as "foo" when the latter is
asked for, but not present, but the former is present.
Following this rule, 'cp /bin/sh a/bin' actually copies the file
/bin/sh.exe, so that we now have a/bin/sh.exe in the repository. This
difference did not matter in the tests in the past because we were only
interested in the equality of contents generated in various ways. But
recently added tests check file names, in particular, the presence of
"a/bin/sh". This test fails on Windows, as we do not have a file by this
name, but "a/bin/sh.exe".
Use test-genrandom to generate the large binary file in the repository
under the expected name.
We could change the guilty line to 'cat /bin/sh >a/bin/sh', but it is
better for test reproducibility to ensure that the test data is the same
across platforms, which test-genrandom can guarantee.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We require use of test_must_fail to check expected non-zero exit by
Git itself, but discourage test_must_fail to be used for checking
exit status of non Git commands that are supplied by the system.
The current text explains the reason for the former but not the
latter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are general guidelines for writing good tests in t/README
but neither SubmittingPatches nor CodingGuidelines refers to it,
which makes the document easy to be missed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No callers rely on $status so there's don't need to set
it during merge_cmd() for diffmerge, emerge, and kdiff3.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Combine the $last_status checks into a single conditional.
Replace $last_status and $rollup_status with a single variable.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-difftool--helper returns a zero exit status unless
--trust-exit-code is in effect. Add an explicit exit statement
to make this clearer.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove return statements and rework check_unchanged() so that the exit
status from the last evaluated expression bubbles up to the callers.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though setup_user_tool assigns the exit status from "eval
$merge_tool_cmd" to $status, the variable is overwritten by the
function it calls next, check_unchanged, without ever getting looked
at by anybody. And "return $status" at the end of this function
returns the value check_unchanged assigned to it (which is the same
as the value the function returns). Which makes the assignment a
no-op.
Remove it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some file systems do not support the executable bit:
a) The user executable bit is always 0, e.g. VFAT mounted with
-onoexec
b) The user executable bit is always 1, e.g. cifs mounted with
-ofile_mode=0755
c) There are system where user executable bit is 1 even if it
should be 0 like b), but the file mode can be maintained
locally. chmod -x changes the file mode from 0766 to 0666,
until the file system is unmounted and remounted and the file
mode is 0766 again.
This been observed when a Windows machine with NTFS exports a share to
Mac OS X via smb or afp.
Case a) and b) are handled by the current code. Case c) qualifies
as "non trustable executable bit" and core.filemode should be false,
but this is currently not done.
Detect when ".git/config" has the user executable bit set after
creat(".git/config", 0666) and set core.filemode to false. Because
the permission bits on the file is whatever the end user already had
when we are asked to reinitialise an existing repository, and do not
give any information on the filesystem behaviour, do this only when
running "git init" to create a new repository.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add foo bar" adds neither foo nor bar when bar is ignored, but dies
to let the user recheck their command invocation. This becomes less
helpful when "git add foo.*" is subject to shell expansion and some of
the expanded files are ignored.
"git add --ignore-errors" is supposed to ignore errors when indexing
some files and adds the others. It does ignore errors from actual
indexing attempts, but does not ignore the error "file is ignored" as
outlined above. This is unexpected.
Change "git add foo bar" to add foo when bar is ignored, but issue
a warning and return a failure code as before the change.
That is, in the case of trying to add ignored files we now act the same
way (with or without "--ignore-errors") in which we act for more
severe indexing errors when "--ignore-errors" is specified.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now, the highlighting colors were hard-coded in the
script (as "reverse" and "noreverse"), and you had to edit
the script to change them. This patch teaches diff-highlight
to read from color.diff-highlight.* to set them.
In addition, it expands the possiblities considerably by
adding two features:
1. Old/new lines can be colored independently (so you can
use a color scheme that complements existing line
coloring).
2. Normal, unhighlighted parts of the lines can be colored,
too. Technically this can be done by separately
configuring color.diff.old/new and matching it to your
diff-highlight colors. But you may want a different
look for your highlighted diffs versus your regular
diffs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can turn on ANSI text attributes like "reverse" by
putting "reverse" in your color spec. However, you cannot
ask to turn reverse off.
For common cases, this does not matter. You would turn on
"reverse" at the start of a colored section, and then clear
all attributes with a "reset". However, you may wish to turn
on some attributes, then selectively disable others. For
example:
git log --format="%C(bold ul yellow)%h%C(noul) %s"
underlines just the hash, but without the need to re-specify
the rest of the attributes. This can also help third-party
programs, like contrib/diff-highlight, that want to turn
some attribute on/off without disrupting existing coloring.
Note that some attribute specifications are probably
nonsensical (e.g., "bold nobold"). We do not bother to flag
such constructs, and instead let the terminal sort it out.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some terminals (like XTerm) allow full 24-bit RGB color
specifications using an extension to the regular ANSI color
scheme. Let's allow users to specify hex RGB colors,
enabling the all-important feature of hot pink ref
decorations:
git log --format="%h%C(#ff69b4)%d%C(reset) %s"
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we parse a color name like "red" into its ANSI color
value, we pack the storage into a single int that may take
on many values:
1. If it's "-2", no value has been specified.
2. If it's "-1", the value is "normal" (i.e., no color).
3. If it's 0 through 7, the value is a standard ANSI
color.
4. If it's larger (up to 255), it is a 256-color extended
value.
Given these magic numbers, it is often hard to see what is
going on in the code. Let's refactor this into a struct with
a flag that tells which scheme we are using, along with a
numeric value. This is more verbose, but should hopefully be
simpler to follow. It will also allow us to easily add
support for more schemes, like 24-bit RGB values.
The result is also slightly less efficient to store, but
that's OK; we only store this intermediate state during the
parse, after which we write out the actual ANSI bytes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user specifiers "normal" for a foreground color, this
should be a noop (while this may sound useless, it is the
only way to specify an unchanged foreground color followed
by a specific background color).
We also check that color "-1" does the same thing. This is
not documented, but has worked forever, so let's make sure
we keep supporting it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of git-config's command line options use OPT_BIT to
choose an action, and then parse the non-option arguments
in a context-dependent way. However, --get-color and
--get-colorbool are unlike the rest of the options, in that
they are OPT_STRING, taking the option name as a parameter.
This generally works, because we then use the presence of
those strings to set an action bit anyway. But it does mean
that the option-parser will continue looking for options
even after the key (because it is not a non-option; it is an
argument to an option). And running:
git config --get-color some.key -1
(to use "-1" as the default color spec) will barf, claiming
that "-1" is not an option. Instead, we should treat
--get-color and --get-colorbool as action bits, just like
--add, --get, and all the other actions, and then check that
the non-option arguments we got are sane. This fixes the
weirdness above, and makes those two options like all the
others.
This "fixes" a test in t4026, which checked that feeding
"-2" as a color should fail (it does fail, but prior to this
patch, because parseopt barfed, not because we actually ever
tried to parse the color).
This also catches other errors, like:
git config --get-color some.key black blue
which previously silently ignored "blue" (and now will
complain that you gave too many arguments).
There are some possible regressions, though. We now disallow
these, which currently do what you would expect:
# specifying other options after the action
git config --get-color some.key --file whatever
# using long-arg syntax
git config --get-color=some.key
However, we have never advertised these in the
documentation, and in fact they did not work in some older
versions of git. The behavior was apparently switched as an
accidental side effect of d64ec16 (git config: reorganize to
use parseopt, 2009-02-21).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our color specifications have supported the 256-color ANSI
extension for years, but we never documented it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
lock_ref_sha1_basic is inconsistent about when it calls
die() and when it returns NULL to signal an error. This is
annoying to any callers that want to recover from a locking
error.
This seems to be mostly historical accident. It was added in
4bd18c4 (Improve abstraction of ref lock/write.,
2006-05-17), which returned an error in all cases except
calling safe_create_leading_directories, in which case it
died. Later, 40aaae8 (Better error message when we are
unable to lock the index file, 2006-08-12) asked
hold_lock_file_for_update to die for us, leaving the
resolve_ref code-path the only one which returned NULL.
We tried to correct that in 5cc3cef (lock_ref_sha1(): do not
sometimes error() and sometimes die()., 2006-09-30),
by converting all of the die() calls into returns. But we
missed the "die" flag passed to the lock code, leaving us
inconsistent. This state persisted until e5c223e
(lock_ref_sha1_basic(): if locking fails with ENOENT, retry,
2014-01-18). Because of its retry scheme, it does not ask
the lock code to die, but instead manually dies with
unable_to_lock_die().
We can make this consistent with the other return paths by
converting this to use unable_to_lock_message(), and
returning NULL. This is safe to do because all callers
already needed to check the return value of the function,
since it could fail (and return NULL) for other reasons.
[jk: Added excessive history explanation]
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to catch up with the release of Git 2.2.0 final, make a batch
l10n update for the new l10n change brought by commit d52adf1 (trailer:
display a trailer without its trailing newline).
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Small fixes to a new experimental command already in 'master'.
* cc/interpret-trailers:
trailer: display a trailer without its trailing newline
trailer: ignore comment lines inside the trailers
As of CGI.pm's 4.08 release, the behavior to call
CGI::param() in a list context is deprecated (because it can
be potentially unsafe if called inside a hash constructor).
This causes gitweb to issue a warning for some of our code,
which in turn causes the tests to fail.
Our use is in fact _not_ one of the dangerous cases, as we
are intentionally using a list context. The recommended
route by 4.08 is to use the new CGI::multi_param() call to
make it explicit that we know what we are doing.
However, that function is only available in 4.08, which is
about a month old; we cannot rely on having it.
One option would be to set $CGI::LIST_CONTEXT_WARN globally,
which turns off the warning. However, that would eliminate
the protection these newer releases are trying to provide.
We want to annotate each site as OK using the new function.
So instead, let's check whether CGI provides the
multi_param() function, and if not, provide an
implementation that just wraps param(). That will work on
both old and new versions of CGI. Sadly, we cannot just
check defined(\&CGI::multi_param), because CGI uses the
autoload feature, which claims that all functions are
defined. Instead, we just do a version check.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of the option for argument "recurse-submodules"
is marked for translation even if it expects the untranslated
string and it's missing the option "on-demand" which was introduced
in eb21c73 (2014-03-29, push: teach --recurse-submodules the on-demand
option). Fix this by unmark the string for translation and add the
missing option.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like the perl scripts, python scripts need a dependency to ensure they
are rebuilt when switching between the "dummy" versions that run
without Python and the real thing.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SCRIPT_PERL_GEN is defined as $(patsubst %.perl,%,$(SCRIPT_PERL))
for use in targets like build-perl-script used by makefiles in
subdirectories that override SCRIPT_PERL (see v1.8.2-rc0~17^2,
"git-remote-mediawiki: use toplevel's Makefile", 2013-02-08).
The same expression is used in the rules that actually write the
generated perl scripts, and since these rules were introduced before
SCRIPT_PERL_GEN, they use the longhand instead of that macro. Use the
macro to make reading easier.
Likewise for SCRIPT_SH_GEN. The Python rules already got the same
simplification in v1.8.4-rc0~162^2~8 (2013-05-24).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git-cvsimport is written in perl, which understandably
causes the tests to fail if you build with NO_PERL (which
will avoid building cvsimport at all). The earlier cvsimport
tests in t9600-t9602 are all marked with a PERL
prerequisite, but these ones are not.
The one in t9603 was likely not noticed because it is an
expected failure anyway.
The ones in t9604 have been around for a long time, but it
is likely that the combination of NO_PERL and having cvsps
installed is rare enough that nobody noticed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The add-interactive system is built in perl. If you build
with NO_PERL, running "git commit --interactive" will exit
with an error and the test will fail.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If NO_PERL is not set, our perl scripts are built as
usual. If it is set, then we build "dummy" versions that
tell you git was built without perl support and exit
gracefully.
However, if you switch to NO_PERL in a directory with
existing build artifacts, we do not notice that the files
need rebuilt. We see only that they are newer than the
"unimplemented.sh" wrapper and assume they are done. So
doing:
make
make NO_PERL=Nope
would result in a git-add--interactive script that uses perl
(and running the test suite would make use of it).
Instead, we should trigger a rebuild of the perl scripts
anytime NO_PERL changes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since time immemorial, the test of whether to set "core.filemode"
has been done by trying to toggle the u+x bit on $GIT_DIR/config,
which we know always exists, and then testing whether the change
"took". I find it somewhat odd to use the config file for this
test, but whatever.
The test code didn't set the u+x bit back to its original state
itself, instead relying on the subsequent call to git_config_set()
to re-write the config file with correct permissions.
But ever since
daa22c6f8d config: preserve config file permissions on edits (2014-05-06)
git_config_set() copies the permissions from the old config file to
the new one. This is a good change in and of itself, but it
invalidates the create_default_files()'s assumption, causing "git
init" to leave the executable bit set on $GIT_DIR/config.
Reset the permissions on $GIT_DIR/config when we are done with the
test in create_default_files().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the time the caller specifies to which destination variable
the resulting index_state should be assigned by passing a non-NULL
pointer in o->dst_index to receive that state, but for a caller that
gives a NULL o->dst_index, the resulting index simply leaked.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://github.com/git-l10n/git-po:
l10n: de.po: translate 62 new messages
l10n: de.po: Fixup one translation
l10n: de.po: use imperative form for command options
The git-push manual page used "gitlink" in one place instead of
"linkgit". Fix this so the link renders correctly.
Noticed-by: Dan Allen <dan.j.allen@gmail.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strings returned by git_path() are recycled after a while. Make
a copy of the config filename rather than holding onto the return
value from git_path().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using abs() on long values can cause truncation, so use labs() instead.
Reported by Clang 3.5 (-Wabsolute-value, enabled by -Wall).
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using abs() on long values can cause truncation, so use labs() instead.
Reported by Clang 3.5 (-Wabsolute-value, enabled by -Wall).
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the Linux open(2) man page, open() must return EISDIR
if a directory was attempted to be opened for writing. Our emulation
in mingw_open() does not get this right: it checks only for O_CREAT.
Fix it to check for a write request.
This fixes a failure in reflog handling, which opens files with
O_APPEND|O_WRONLY, but without O_CREAT, and expects EISDIR when the
named file happens to be a directory.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate 62 new messages came from git.pot update in 16742b0
(l10n: git.pot: proposed updates for v2.2.0 (+62)).
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
English grammar with German words doesn't make it a German translation. ;)
Signed-off-by: Stefan Beller <stefanbeller@gmail.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
run_merge_tool() was not setting $status, which prevented the
exit code for builtin tools from being forwarded to the caller.
Capture the exit status and add a test to guarantee the behavior.
Reported-by: Adria Farres <14farresa@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make this test script appear somewhat less old-fashioned:
- Use test helper functions:
- write_script
- test_commit
- test_write_lines
- test_line_count
- test_config
- test_unconfig
- test_path_is_missing
- Remove whitespace between redirection operators and their targets.
- Move preparation of "expect" files into tests.
- Rename "output" files to "actual".
- More consistent quoting, especially around commands that might
expand to nothing.
- More visibility of important whitespace with ${indent}.
- Combine pairs of tests that unnecessarily split setup and verification.
Improved-by: Eric Sunshine <sunshine@sunshineco.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Michael Blume <blume.mike@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are parsing approxidate strings and we find three
numbers separate by one of ":/-.", we guess that it may be a
date. We feed the numbers to match_multi_number, which
checks whether it makes sense as a date in various orderings
(e.g., dd/mm/yy or mm/dd/yy, etc).
One of the checks we do is to see whether it is a date more
than 10 days in the future. This was added in 38035cf (date
parsing: be friendlier to our European friends.,
2006-04-05), and lets us guess that if it is currently April
2014, then "10/03/2014" is probably March 10th, not October
3rd.
This has a downside, though; if you want to be overly
generous with your "--until" date specification, we may
wrongly parse "2014-12-01" as "2014-01-12" (because the
latter is an in-the-past date). If the year is a future year
(i.e., both are future dates), it gets even weirder. Due to
the vagaries of approxidate, months _after_ the current date
(no matter the year) get flipped, but ones before do not.
This patch drops the "in the future" check for dates of this
form, letting us treat them always as yyyy-mm-dd, even if
they are in the future. This does not affect the normal
dd/mm/yyyy versus mm/dd/yyyy lookup, because this code path
only kicks in when the first number is greater than 70
(i.e., it must be a year, and cannot be either a date or a
month).
The one possible casualty is that "yyyy-dd-mm" is less
likely to be chosen over "yyyy-mm-dd". That's probably OK,
though because:
1. The difference happens only when the date is in the
future. Already we prefer yyyy-mm-dd for dates in the
past.
2. It's unclear whether anybody even uses yyyy-dd-mm
regularly. It does not appear in lists of common date
formats in Wikipedia[1,2].
3. Even if (2) is wrong, it is better to prefer ISO-like
dates, as that is consistent with what we use elsewhere
in git.
[1] http://en.wikipedia.org/wiki/Date_and_time_representation_by_country
[2] http://en.wikipedia.org/wiki/Calendar_date
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we "git checkout $tree", we pull paths from $tree into
the index, and then check the resulting entries out to the
worktree. Our method for the first step is rather
heavy-handed, though; it clobbers the entire existing index
entry, even if the content is the same. This means we lose
our stat information, leading checkout_entry to later
rewrite the entire file with identical content.
Instead, let's see if we have the identical entry already in
the index, in which case we leave it in place. That lets
checkout_entry do the right thing. Our tests cover two
interesting cases:
1. We make sure that a file which has no changes is not
rewritten.
2. We make sure that we do update a file that is unchanged
in the index (versus $tree), but has working tree
changes. We keep the old index entry, and
checkout_entry is able to realize that our stat
information is out of date.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The approxidate functions accept an extra "now" parameter to
avoid calling time() themselves. We use this in our test
suite to make sure we have a consistent time for computing
relative dates. However, deep in the bowels of approxidate,
we also call time() to check whether possible dates are far
in the future. Let's make sure that the "now" override makes
it to that spot, too, so we can consistently test that
feature.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test misused a URL "file://." to mean "relative to here",
which we no longer accept.
In a file:// URL, typically there is no host, and RFC1738 says that
file:///<path> should be used.
Update t5705 to use a working URL.
Reported-by: Michael Blume <blume.mike@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was a redundant code for a builtin command retrieval in
'handle_builtin()' and 'is_builtin()'.
Introduce a new function 'get_builtin()' and using it from
both of these places to reduce the redundancy.
Signed-off-by: Slavomir Vlcek <svlc@inventati.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an earlier part there is:
"re-send it with "To:" set to the maintainer [*1*] and "cc:" the list [*2*]"
for the final submission, but later we see
"Send it to the list and cc the maintainer."
Fix the later one to match the previous.
Signed-off-by: Slavomir Vlcek <svlc@inventati.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user has gone through the trouble of explicitly adding an empty
note, then "git log" should not silently skip it (as if it didn't exist).
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although the "git notes" man page advertises that we support binary-safe
notes addition (using the -C option), we currently do not support adding
the empty note (i.e. using the empty blob to annotate an object). Instead,
an empty note is always treated as an intent to remove the note
altogether.
Introduce the --allow-empty option to the add/append/edit subcommands,
to explicitly allow an empty note to be stored into the notes tree.
Also update the documentation, and add test cases for the new option.
Reported-by: James H. Fisher <jhf@trifork.com>
Improved-by: Kyle J. McKay <mackyle@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
create_note() has a non-trivial interface, and comprises three loosely
related parts:
1. launching the editor with the note contents, if needed
2. appending to an existing note, if append_only was given
3. adding or removing the resulting note, based on whether it's non-empty
Split it along those lines to make the logic clearer: The first part
goes into a new function - prepare_note_data(), with a simpler interface.
The second part is moved into append_edit(), which is the only user of
this code. Finally, the add vs. remove decision is moved into the callers
(add() and append_edit()), keeping the logic for writing the actual note
object in a separate function: write_note_data().
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the need for 'retval' and the unnecessary goto. Also reorganize
to only call free_note_data() is actually needed.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, git-fast-import and -export link to each
other, and gitremote-helpers links to existing remote
helpers, and vice versa. Also link to fast-import from the
remote helper spec, as this is relevant for remote helpers
using the fast-import format.
Signed-off-by: Max Horn <max@quendi.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Explicitly declare that git_atexit_dispatch() and git_atexit_clear()
take no parameters instead of leaving their parameter list empty and
thus unspecified.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the 'path' variable from create_note() and into the
note_data struct. Unify cleanup of note_data objects with
a free_note_data() function.
This might not make too much sense on its own, but it makes the
future refactoring of create_note() considerably cleaner.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for some needed refactoring, rename struct msg_arg to
struct note_data, and rename its instances from "msg" to "d" (also
removing some unnecessary parentheses). The 'msg_arg' name was
inherited from tag.c, but is not really a good name for the contents
of a note.
Also rename write_note_data() to copy_obj_to_fd(), which more aptly
describes what it actually does: Copying the contents of a git object
(given by its SHA1) into a given file descriptor.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test cases documenting the current behavior when trying to
add/append/edit empty notes. This is in preparation for adding
--allow-empty; to allow empty notes to be stored.
Improved-by: Eric Sunshine <sunshine@sunshineco.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a small buglet when trying to explicitly add the empty blob
as a note object using the -c or -C option to git notes add/append.
Instead of failing with a nonsensical error message indicating that the
empty blob does not exist, we should rather behave as if an empty notes
message was given (e.g. using -m "" or -F /dev/null).
The next patch contains a test that verifies the fixed behavior.
Found-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a missing article at the beginning of a sentence, and rephrase
slightly.
Signed-off-by: Thomas Quinot <thomas@quinot.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert users of struct child_process to using the managed argv_array
args instead of providing their own. This shortens the code a bit and
ensures that the allocated memory is released automatically after use.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Initialize the struct child_process variable cp at declaration time.
This is shorter, saves a function call and prevents using the variable
before initialization by mistake.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure we look for trailers before any conflict line
by reusing the ignore_non_trailer() function.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/conflict-hint:
merge & sequencer: turn "Conflicts:" hint into a comment
builtin/commit.c: extract ignore_non_trailer() helper function
merge & sequencer: unify codepaths that write "Conflicts:" hint
builtin/merge.c: drop a parameter that is never used
git-tag.txt: Add a missing hyphen to `-s`
Trailers passed to the parse_trailer() function often have
a trailing newline. When erroring out, we should display
the invalid trailer properly, that means without any
trailing newline.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise trailers that are commented out might be
processed. We would also error out if the comment line
char is also a separator.
This means that comments inside a trailer block will
disappear, but that was already the case anyway.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two tests recently added to t1410 create branches "a" and
"a/b" to test d/f conflicts on reflogs. Earlier, unrelated
tests in that script create the path "A/B" in the working
tree. There's no conflict on a case-sensitive filesystem,
but on a case-insensitive one, "git log" will complain that
"a/b" is both a revision and a working tree path.
We could fix this by using a "--" to disambiguate, but we
are probably better off using names that are less confusing
to make it more clear that they are unrelated to the working
tree files. This patch turns "a/b" into "one/two".
Reported-by: Michael Blume <blume.mike@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use libcurl's high-level API functions to implement git-imap-send
instead of the previous low-level OpenSSL-based functions.
Since version 7.30.0, libcurl's API has been able to communicate with
IMAP servers. Using those high-level functions instead of the current
ones would reduce imap-send.c by some 1200 lines of code. For now,
the old ones are wrapped in #ifdefs, and the new functions are enabled
by make if curl's version is >= 7.34.0, from which version on curl's
CURLOPT_LOGIN_OPTIONS (enabling IMAP authentication) parameter has been
available. The low-level functions will still be used for tunneling
into the server for now.
As I don't have access to that many IMAP servers, I haven't been able to
test the new code with a wide variety of parameter combinations. I did
test both secure and insecure (imaps:// and imap://) connections and
values of "PLAIN" and "LOGIN" for the authMethod.
In order to suppress a sparse warning about "using sizeof on a
function", we use the same solution used in commit 9371322a6
("sparse: suppress some "using sizeof on a function" warnings",
06-10-2013) which solved exactly this problem for the other commands
using libcurl.
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Bernhard Reiter <ockham@raz.or.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It may be impractical to install a wrapper script for GIT_SSH
when additional parameters need to be passed. Provide an alternative
way of specifying a shell command to be run, including command line
arguments, by means of the GIT_SSH_COMMAND environment variable,
which behaves like GIT_SSH but is passed to the shell.
The special circuitry to modify parameters in the case of using
PuTTY's plink/tortoiseplink is activated only when using GIT_SSH;
in the case of using GIT_SSH_COMMAND, it is deliberately left up to
the user to make any required parameters adaptation before calling
the underlying ssh implementation.
Signed-off-by: Thomas Quinot <thomas@quinot.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the original phrasing, it is possible to misunderstand as if
the contents in the index for only the specified paths are made into
the new commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After setting GITGUI_VERBOSE to enable load tracing the source command is
redefined but fails if the git installation path has spaces. Fixed quoting
by using lists to handle the arguments.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Windows does not necessarily mean Cygwin, it could also be MSYS. The
latter ships with a version of "kill" that does not understand "-f". In
msysgit this was addressed shipping Cygwin's version of kill.
Properly fix this by using the stock Windows "taskkill" command instead,
which is available since Windows XP Professional.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Corner-case bugfixes for "git fetch" around reflog handling.
* jk/fetch-reflog-df-conflict:
ignore stale directories when checking reflog existence
fetch: load all default config at startup
* rs/use-child-process-init-more:
bundle: split out ref writing from bundle_create
bundle: split out a helper function to compute and write prerequisites
bundle: split out a helper function to create pack data
use child_process_init() to initialize struct child_process variables
The code to use cache-tree trusted the on-disk data too much
and fell into an infinite loop.
* jk/cache-tree-protect-from-broken-libgit2:
cache-tree: avoid infinite loop on zero-entry tree
The option name "--store" was used early in development, but
never even made it into an applied patch, let alone a
released version of git. I forgot to update the matching
documentation at the time, though.
Noticed-by: Jesse Hopkins <jesse.hopkins@lmco.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -v/-q options were sort-of supported but without using the
parse-options API, and were not documented.
Signed-off-by: Bernhard Reiter <ockham@raz.or.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While using diff-highlight with other tools, I have discovered that Python
ignores SIGPIPE by default. Unfortunately, this also means that tools
attempting to launch a pager under Python--and don't realize this is
happening--means that the subprocess inherits this setting. In this case, it
means diff-highlight will be launched with SIGPIPE being ignored. Let's work
with those broken scripts by restoring the default SIGPIPE handler.
Signed-off-by: John Szakmeister <john@szakmeister.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to fixing trivial and obvious typos, be careful about
the following points:
- Spell ASCII, URL and CRC in ALL CAPS;
- Spell Linux as Capitalized;
- Do not omit periods in "i.e." and "e.g.".
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
line-log tries to access all parents of a commit, but only the first
parent has been loaded if "--first-parent" is specified, resulting
in a crash.
Limit the number of parents to one if "--first-parent" is specified.
Reported-by: Eric N. Vander Weele <ericvw@gmail.com>
Signed-off-by: Tzvetan Mikov <tmikov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we update a ref, we have two rules for whether or not
we actually update the reflog:
1. If the reflog already exists, we will always append to
it.
2. If log_all_ref_updates is set, we will create a new
reflog file if necessary.
We do the existence check by trying to open the reflog file,
either with or without O_CREAT (depending on log_all_ref_updates).
If it fails, then we check errno to see what happened.
If we were not using O_CREAT and we got ENOENT, the file
doesn't exist, and we return success (there isn't a reflog
already, and we were not told to make a new one).
If we get EISDIR, then there is likely a stale directory
that needs to be removed (e.g., there used to be "foo/bar",
it was deleted, and the directory "foo" was left. Now we
want to create the ref "foo"). If O_CREAT is set, then we
catch this case, try to remove the directory, and retry our
open. So far so good.
But if we get EISDIR and O_CREAT is not set, then we treat
this as any other error, which is not right. Like ENOENT,
EISDIR is an indication that we do not have a reflog, and we
should silently return success (we were not told to create
it). Instead, the current code reports this as an error, and
we fail to update the ref at all.
Note that this is relatively unlikely to happen, as you
would have to have had reflogs turned on, and then later
turned them off (it could also happen due to a bug in fetch,
but that was fixed in the previous commit). However, it's
quite easy to fix: we just need to treat EISDIR like ENOENT
for the non-O_CREAT case, and silently return (note that
this early return means we can also simplify the O_CREAT
case).
Our new tests cover both cases (O_CREAT and non-O_CREAT).
The first one already worked, of course.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we start the git-fetch program, we call git_config to
load all config, but our callback only processes the
fetch.prune option; we do not chain to git_default_config at
all.
This means that we may not load some core configuration
which will have an effect. For instance, we do not load
core.logAllRefUpdates, which impacts whether or not we
create reflogs in a bare repository.
Note that I said "may" above. It gets even more exciting. If
we have to transfer actual objects as part of the fetch,
then we call fetch_pack as part of the same process. That
function loads its own config, which does chain to
git_default_config, impacting global variables which are
used by the rest of fetch. But if the fetch is a pure ref
update (e.g., a new ref which is a copy of an old one), we
skip fetch_pack entirely. So we get inconsistent results
depending on whether or not we have actual objects to
transfer or not!
Let's just load the core config at the start of fetch, so we
know we have it (we may also load it again as part of
fetch_pack, but that's OK; it's designed to be idempotent).
Our tests check both cases (with and without a pack). We
also check similar behavior for push for good measure, but
it already works as expected.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Locked paths can be saved in a linked list so that if something wrong
happens, *.lock are removed. For relative paths, this works fine if we
keep cwd the same, which is true 99% of time except:
- update-index and read-tree hold the lock on $GIT_DIR/index really
early, then later on may call setup_work_tree() to move cwd.
- Suppose a lock is being held (e.g. by "git add") then somewhere
down the line, somebody calls real_path (e.g. "link_alt_odb_entry"),
which temporarily moves cwd away and back.
During that time when cwd is moved (either permanently or temporarily)
and we decide to die(), attempts to remove relative *.lock will fail,
and the next operation will complain that some files are still locked.
Avoid this case by turning relative paths to absolute before storing
the path in "filename" field.
Reported-by: Yue Lin Ho <yuelinho777@gmail.com>
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Adapted-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate 62 new messages (2296t0f0u) for git v2.2.0-rc0. Also changed
the translation of bare (repository).
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
* 'for-junio' of git://bogomips.org/git-svn:
git-svn: use SVN::Ra::get_dir2 when possible
git-svn: add space after "W:" prefix in warning
git-svn: (cleanup) remove editor param passing
git-svn: prepare SVN::Ra config pieces once
Git.pm: add specified name to tempfile template
git-svn: disable _rev_list memoization
git-svn: save a little memory as fetch progresses
git-svn: remove unnecessary DESTROY override
git-svn: reload RA every log-window-size
git-svn.txt: advertise pushurl with dcommit
git-svn: remove mergeinfo rev caching
git-svn: cache only mergeinfo revisions
git-svn: reduce check_cherry_pick cache overhead
git-svn: only look at the root path for svn:mergeinfo
git-svn: only look at the new parts of svn:mergeinfo
Allow painting or not painting (partial) matches in context lines
when showing "grep -C<num>" output in color.
* rs/grep-color-words:
grep: add color.grep.matchcontext and color.grep.matchselected
The bundle_create() function has a number of logical steps:
process the input, write the refs, and write the packfile.
Recent commits split the first and third into separate
sub-functions. It's worth splitting the middle step out,
too, if only because it makes the progression of the steps
more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new helper compute_and_write_prerequistes() is ugly, but it
cannot be avoided. Ideally we should avoid a function that computes
and does I/O at the same time, but the prerequisites lines in the
output needs the human readable title only to help the recipient of
the bundle. The code copies them straight from the rev-list output
and immediately discards as no other internal computation needs that
information.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The create_bundle() function, while it does one single logical
thing, takes a rather large implementation to do so.
Let's start separating what it does into smaller steps to make it
easier to see what is going on. This is a first step to separate
out the actual pack-data generation, after the earlier part of the
function figures out which part of the history to place in the
bundle.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callers of get_merge_bases() can choose to leave object flags
used during the merge-base traversal by passing cleanup=0 as a
parameter, but in practice a very few callers can afford to do so
(namely, "git merge-base"), as they need to compute merge base in
preparation for other processing of their own and they need to see
the object without contaminate flags.
Change the function signature of get_merge_bases_many() and
get_merge_bases() to drop the cleanup parameter, so that the
majority of the callers do not have to say ", 1" at the end.
Give a new get_merge_bases_many_dirty() API to support only a few
callers that know they do not need to spend cycles cleaning up the
object flags.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unless there is a good reason to belieave that a particular
invocation of a get_merge_bases*() is the last one that cares about
the object flags the computation of merge bases leaves on the
objects, the "cleanup" parameter should always be true, and I do not
think there is one in this codepath.
Found by code inspection.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The loop in cache-tree's update_one iterates over all the
entries in the index. For each one, we find the cache-tree
subtree which represents our path (creating it if
necessary), and then recurse into update_one again. The
return value we get is the number of index entries that
belonged in that subtree. So for example, with entries:
a/one
a/two
b/one
We start by processing the first entry, "a/one". We would
find the subtree for "a" and recurse into update_one. That
would then handle "a/one" and "a/two", and return the value
2. The parent function then skips past the 2 handled
entries, and we continue by processing "b/one".
If the recursed-into update_one ever returns 0, then we make
no forward progress in our loop. We would process "a/one"
over and over, infinitely.
This should not happen normally. Any subtree we create must
have at least one path in it (the one that we are
processing!). However, we may also reuse a cache-tree entry
we found in the on-disk index. For the same reason, this
should also never have zero entries. However, certain buggy
versions of libgit2 could produce such bogus cache-tree
records. The libgit2 bug has since been fixed, but it does
not hurt to protect ourselves against bogus input coming
from the on-disk data structures.
Note that this is not a die("BUG") or assert, because it is
not an internal bug, but rather a corrupted on-disk
structure. It's possible that we could even recover from it
(by throwing out the bogus cache-tree entry), but it is not
worth the effort; the important thing is that we report an
error instead of looping infinitely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://ozlabs.org/~paulus/gitk:
gitk: Remove boilerplate for configuration variables
gitk: Show detached HEAD if --all is specified
gitk: Do not depend on Cygwin's "kill" command on Windows
If HEAD is detached, 'gitk --all' does not show it. This is inconvenient
for frontend program, and for example git log does show the detached HEAD.
gitk uses git rev-parse to find a list of branches to show.
Apparently, the command does not include detached HEAD to output if
--all argument is specified. This has been discussed in [1] and stated
as expected behavior. So rev-parse's parameters should be tuned in gitk.
[1] http://thread.gmane.org/gmane.comp.version-control.git/255996
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Windows does not necessarily mean Cygwin, it could also be MSYS. The
latter ships with a version of "kill" that does not understand "-f".
In msysgit this was addressed by shipping Cygwin's version of kill.
Properly fix this by using the stock Windows "taskkill" command instead,
which is available since Windows XP Professional.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Memoizing these initialization functions saves some memory for
long fetches which require scanning many unwanted revisions
before any wanted revisions happen.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This should help me track down errors in git-svn more easily:
write .git/Git_XXXXXX: Bad file descriptor
at /usr/lib/perl5/SVN/Ra.pm line 623
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Allow diff tool backend to stop early by exiting with a non-zero
status.
* da/difftool:
difftool: add support for --trust-exit-code
difftool--helper: exit when reading a prompt answer fails
In a tarball extract whose files are all read-only, running GPG
tests would have failed due to unwritable files.
* mg/lib-gpg-ro-safety:
t/lib-gpg: make gpghome files writable
z/OS port
* dm/port2zos:
compat/bswap.h: detect endianness from XL C compiler macros
Makefile: reorder linker flags in the git executable rule
git-compat-util.h: support variadic macros with the XL C compiler
Tighten the logic to decide that an unreachable cruft is
sufficiently old by covering corner cases such as an ancient object
becoming reachable and then going unreachable again, in which case
its retention period should be prolonged.
* jk/prune-mtime: (28 commits)
drop add_object_array_with_mode
revision: remove definition of unused 'add_object' function
pack-objects: double-check options before discarding objects
repack: pack objects mentioned by the index
pack-objects: use argv_array
reachable: use revision machinery's --indexed-objects code
rev-list: add --indexed-objects option
rev-list: document --reflog option
t5516: test pushing a tag of an otherwise unreferenced blob
traverse_commit_list: support pending blobs/trees with paths
make add_object_array_with_context interface more sane
write_sha1_file: freshen existing objects
pack-objects: match prune logic for discarding objects
pack-objects: refactor unpack-unreachable expiration check
prune: keep objects reachable from recent objects
sha1_file: add for_each iterators for loose and packed objects
count-objects: use for_each_loose_file_in_objdir
count-objects: do not use xsize_t when counting object size
prune-packed: use for_each_loose_file_in_objdir
reachable: mark index blobs as SEEN
...
Add machinery to alternatively use AsciiDoctor to format our
documentation.
* bc/asciidoctor:
Documentation: remove Asciidoctor linkgit macro
Documentation: refactor common operations into variables
Documentation: implement linkgit macro for Asciidoctor
Documentation: move some AsciiDoc parameters into variables
Call child_process_init() instead of zeroing the memory of variables of
type struct child_process by hand before use because the former is both
clearer and shorter.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the asynchronous start of copy_to_sideband() fails, then any
env_array entries added to struct child_process proc by
prepare_push_cert_sha1() are leaked. Call the latter function only
after start_async() succeeded so that the allocated entries are
cleaned up automatically by start_command() or finish_command().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like other hints such as "Changes to be committed" we show in
the editor to remind the committer what paths were involved in the
resulting commit to help improving their log message, this section
is merely a reminder.
Traditionally, it was not made into comments primarily because it
has to be generated outside the wt-status infrastructure, and also
because it was meant as a bit stronger reminder than the others
(i.e. explaining how you resolved conflicts is much more important
than mentioning what you did to every paths involved in the commit).
But that still does not make this hint a part of the log message
proper, and not showing it as a comment is inviting mistakes.
Note that we still notice "Conflicts:" followed by list of indented
pathnames as an old-style cruft and insert a new Signed-off-by:
before it. This is so that "commit --amend -s" adds the new S-o-b
at the right place when used on an older commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract a helper function from prepare_to_commit() to determine
where to place a new Signed-off-by: line, which is essentially the
true "end" of the log message, ignoring the trailing "Conflicts:"
line and everything below it.
The detection _should_ make sure the "Conflicts:" line it finds is
truly the conflict hint block by checking everything that follows is
a HT indented pathname to avoid false positive, but this logic will
be revamped in a later patch to ignore comments and blanks anyway,
so it is left as-is in this step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach difftool to exit when a diff tool returns a non-zero exit
code when either --trust-exit-code is specified or
difftool.trustExitCode is true.
Forward exit codes from invoked diff tools to the caller when
--trust-exit-code is used.
Suggested-by: Adri Farr <14farresa@gmail.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config option color.grep.match can be used to specify the highlighting
color for matching strings. Add the options matchContext and matchSelected
to allow different colors to be specified for matching strings in the
context vs. in selected lines. This is similar to the ms and mc specifiers
in GNU grep's environment variable GREP_COLORS.
Tests are from Zoltan Klinger's earlier attempt to solve the same
issue in a different way.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It took me a long time to notice the rider on the pack.threads
configuration option that it would multiple the memory consumption
by the number of CPUs in the machine. Clarify that the limit
applies per-thread.
Signed-off-by: Robert de Bath <rdebath@tvisiontech.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strbuf_add_commented_lines() function passes a pair of prefixes,
one to be used for a non-empty line, and the other for an empty
line, to underlying add_lines(). The former is set to a comment
char followed by a SP, while the latter is set to just the comment
char. This is designed to give a SP after the comment character,
e.g. "# <user text>\n", on a line with some text, and to avoid
emitting an unsightly "# \n" for an empty line.
Teach this machinery to also use the latter space-less prefix when
the payload line begins with a tab, to show e.g. "#\t<user text>\n";
otherwise we will end up showing "# \t<user text>\n" which is
similarly unsightly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/lib-gpg.sh copies the test environment's gpg home to the trash
directory and makes sure the directoty is writable.
Make sure the copied files are writable, too.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoctor provides an extension implementing a backend-independent
macro for dealing with manpage links just like the linkgit macro. As
this is more likely to be up-to-date with future changes in Asciidoctor,
prefer using it over reimplementing in Git.
This reverts commit 773ee47c2b.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Makefile performs several very similar tasks to convert AsciiDoc
files into either HTML or DocBook. Move these items into variables to
reduce the duplication.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no /usr/include/endian.h equivalent on z/OS, but the
compiler will define macros to indicate endianness on host and
target hardware. This adds a test for these macros as a last
resort for determining byte order.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The XL C compiler can fail due to mixing library path and object
file arguments, for example when linking git while building with
"gmake LDFLAGS=-L$prefix/lib".
Move the ALL_LDFLAGS variable expansion in the git executable rule
to be consistent with all the other linking rules, namely to have
LDFLAGS such as -L$where before the object files *.o being linked
together.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the XL C compiler is run with an appropriate language level or
suboption, it defines a feature test macro to indicate support for
variadic macros by defining __C99_MACRO_WITH_VA_ARGS C preprocessor
macro.
This was tested on z/OS, but it should also work on AIX according
to IBM documentation.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An attempt to quit difftool by hitting Ctrl-D (EOF) at its prompt does
not quit it, but is treated as if 'yes' was answered to the prompt and
all following prompts, which is contrary to the user's intent. Fix the
error check.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This memoization appears unneeded as the check_cherry_pick2 cache is
in front of it does enough.
With this change applied, importing from local svn+ssh and http copies
of the R repo[1] takes only 2:00 (2 hours) on my system and the git-svn
process never uses more than 60MB RSS on my x86-64 GNU/Linux system[2].
This 60M measurement is only for the git-svn Perl process itself and
does not include memory used by git subprocesses accessing large packs
(subprocess memory usage _is_ measured by my time(1) tool).
Before this change, an import took longer (2:20) on svn+ssh:// but
git-svn used around 240MB during the imports. Worse yet, git-svn
ballooned to over 400M when writing out the cache to the filesystem.
I also tried removing memoization for `has_no_changes', too, but a
local copy of the R repository(*) was not close to finishing within
10 hours on my system.
[1] http://svn.r-project.org/R
[2] file:// repos causes libsvn to use more memory internally
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
There is no reason to keep entries in the %revs hash after we're
done processing a revision, so allow entries become freed as
processing continues.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This override was probably never necessary, but most likely a no-op
as it does not appear to do anything in SVN::Ra itself.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Despite attempting to use local memory pools everywhere we can,
(including our call to SVN::Ra::do_update and all subsequent reporter
calls), there does not appear to be a way to force the Git::SVN::Fetcher
callbacks to use a pool other than the per-SVN::Ra pool.
Git::SVN::Fetcher ends up using the main RA pool which grows
monotonically in size for the lifetime of the RA object.
Thus the only way to free that memory appears to be to destroy and
recreate the RA connection for at every --log-window-size interval.
This reduces memory usage over the course of fetching 10K revisions
using a test repository created with the script at the end of this
commit message.
As reported by time(1) on my x86-64 system:
before: 54024k
after: 28680k
Unfortunately, there remains some yet-to-be-tracked-down slow memory
growth which would be evident as the `nr' parameter increases in
the repository generation script:
-----------------------------8<------------------------------
set -e
tmp=$(mktemp -d svntestrepo-XXXXXXXX)
svnadmin create "$tmp"
repo=file://"$(cd $tmp && pwd)"
svn co "$repo" "$tmp/wd"
cd "$tmp/wd"
if ! test -f a
then
> a
svn add a
svn commit -m 'A'
fi
nr=10000
while test $nr -gt 0
do
echo $nr > a
svn commit -q -m A
nr=$((nr - 1))
done
echo "repository created in $repo"
-----------------------------8<------------------------------
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Advertise that the svn-remote.<name>.pushurl config key allows specifying
the commit URL for the entire SVN repository in the documentation of the
git svn dcommit command.
Signed-off-by: Sveinung Kvilhaugsvik <sveinung84@users.sourceforge.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This should further reduce memory usage from the new mergeinfo
speedups without hurting performance too much, assuming
reasonable latency to the SVN server.
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
Suggested-by: Jakob Stoklund Olesen <stoklund@2pi.dk>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This should reduce excessive memory usage from the new mergeinfo
caches without hurting performance too much, assuming reasonable
latency to the SVN server.
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
Suggested-by: Jakob Stoklund Olesen <stoklund@2pi.dk>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We do not need to store entire lists of commits, only the
number of incomplete and the first commit for reference.
This reduces the amount of data we need to store in memory
and on disk stores.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Subversion can put mergeinfo on any sub-directory to track cherry-picks.
Since cherry-picks are not represented explicitly in git, git-svn should
just ignore it.
Signed-off-by: Jakob Stoklund Olesen <stoklund@2pi.dk>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
In a Subversion repository where many feature branches are merged into a
trunk, the svn:mergeinfo property can grow very large. This severely
slows down git-svn's make_log_entry() because it is checking all
mergeinfo entries every time the property changes.
In most cases, the additions to svn:mergeinfo since the last commit are
pretty small, and there is nothing to gain by checking merges that were
already checked for the last commit in the branch.
Add a mergeinfo_changes() function which computes the set of interesting
changes to svn:mergeinfo since the last commit. Filter out merged
branches whose ranges haven't changed, and remove a common prefix of
ranges from other merged branches.
This speeds up "git svn fetch" by several orders of magnitude on a large
repository where thousands of feature branches have been merged.
Signed-off-by: Jakob Stoklund Olesen <stoklund@2pi.dk>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Code clean-up.
* sb/plug-transport-leak:
.mailmap: add Stefan Bellers corporate mail address
transport: free leaking head in transport_print_push_status()
Allow us build with NO_PTHREADS=NoThanks compilation option.
* eb/no-pthreads:
Handle atexit list internaly for unthreaded builds
pack-objects: set number of threads before checking and warning
index-pack: fix compilation with NO_PTHREADS
Add managed "env" array to child_process to clarify the lifetime
rules.
* rs/run-command-env-array:
use env_array member of struct child_process
run-command: add env_array, an optional argv_array for env
Splitting pack-objects output into multiple packs is incompatible
with the use of reachability bitmap.
* jk/pack-objects-no-bitmap-when-splitting:
pack-objects: turn off bitmaps when we split packs
Two identical loops in suggest_conflicts() in merge, and
do_recursive_merge() in sequencer, can use a single helper function
extracted from the latter that prepares the "Conflicts:" hint that
is meant to remind the user the paths for which merge conflicts had
to be resolved to write a better commit log message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the very beginning when we added the "renormalizing" parameter
to this function with 7610fa57 (merge-recursive --renormalize,
2010-08-05), nobody seems to have ever referenced it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
push --signed promises to take user.signingkey as the signing key but
fails to read the config.
Make it do so.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting from a single file, A, if you create B as a copy of A (and
possibly make some edit) and then make extensive change to A, you
will see:
$ git diff -C --name-status
C89 A B
M A
which is expected. However, if you ask the same question in a
different way, you see this:
$ git diff -B -M --name-status
R89 A B
M100 A
telling us that A was rename-edited into B (as if "A will no longer
exist as the result") and at the same time A itself was extensively
edited.
In this case, because the resulting tree still does have file A
(even if it has contents vastly different from the original), we
should use "C"opy, not "R"ename, to avoid hinting that A somehow
goes away.
Two existing tests were depending on the wrong behaviour, and fixed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some internal error messages leaked out of the bash completion when
typing "git cmd <TAB>" and the machinery tried to complete
refnames.
* js/completion-hide-not-a-repo:
completion: silence "fatal: Not a git repository" error
Newer versions of 'meld' breaks the auto-detection we use to see if
they are new enough to support the `--output` option.
* da/mergetool-meld:
mergetools/meld: make usage of `--output` configurable and more robust
Allow a temporary directory specified to be used while running "git
mergetool" backend.
* da/mergetool-temporary-directory:
t7610-mergetool: add test cases for mergetool.writeToTemp
mergetool: add an option for writing to a temporary directory
Allow "git mergetool --help" to run outside a Git repository.
* da/mergetool-tool-help:
difftool: don't assume that default sh is sane
mergetool: don't require a work tree for --tool-help
git-sh-setup: move GIT_DIR initialization into a function
mergetool: use more conservative temporary filenames
test-lib-functions: adjust style to match CodingGuidelines
t7610-mergetool: prefer test_config over git config
Tweak the names of the three throw-away files "git mergetool" comes
up with to feed the merge tool backend, so that a file with a
single dot in its name in the original (e.g. "hello.c") will have
only one dot in these variants (e.g. "hello_BASE_4321.c").
* da/mergetool-temporary-filename:
mergetool: use more conservative temporary filenames
The clean-up of this test script was long overdue and is a very
welcome change.
* da/mergetool-tests:
test-lib-functions: adjust style to match CodingGuidelines
t7610-mergetool: use test_config to isolate tests
t7610-mergetool: add missing && and remove commented-out code
t7610-mergetool: use tabs instead of a mix of tabs and spaces
The API to update refs have been restructured to allow introducing
a true transactional updates later. We would even allow storing
refs in backends other than the traditional filesystem-based one.
* rs/ref-transaction: (25 commits)
ref_transaction_commit: bail out on failure to remove a ref
lockfile: remove unable_to_lock_error
refs.c: do not permit err == NULL
remote rm/prune: print a message when writing packed-refs fails
for-each-ref: skip and warn about broken ref names
refs.c: allow listing and deleting badly named refs
test: put tests for handling of bad ref names in one place
packed-ref cache: forbid dot-components in refnames
branch -d: simplify by using RESOLVE_REF_READING
branch -d: avoid repeated symref resolution
reflog test: test interaction with detached HEAD
refs.c: change resolve_ref_unsafe reading argument to be a flags field
refs.c: make write_ref_sha1 static
fetch.c: change s_update_ref to use a ref transaction
refs.c: ref_transaction_commit: distinguish name conflicts from other errors
refs.c: pass a list of names to skip to is_refname_available
refs.c: call lock_ref_sha1_basic directly from commit
refs.c: refuse to lock badly named refs in lock_ref_sha1_basic
rename_ref: don't ask read_ref_full where the ref came from
refs.c: pass the ref log message to _create/delete/update instead of _commit
...
Beyond Compare version 4 works the same way as version 3, so rename
the existing "bc3" adaptor to just "bc", while keeping "bc3" as a
backward compatible wrapper.
Noticed-by: Olivier Croquette <ocroquette@free.fr>
Helped-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This "stk" shadows the first declaration at the top. There's currently
no bad effect. But let's avoid it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note that despite the private address being first and primary,
Google owns the copyright on this patch as any other patch I'll be
sending signed off by the sbeller@google.com address.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new filter to programatically edit the tail end of the commit log
messages.
* cc/interpret-trailers:
Documentation: add documentation for 'git interpret-trailers'
trailer: add tests for commands in config file
trailer: execute command from 'trailer.<name>.command'
trailer: add tests for "git interpret-trailers"
trailer: add interpret-trailers command
trailer: put all the processing together and print
trailer: parse trailers from file or stdin
trailer: process command line trailer arguments
trailer: read and process config information
trailer: process trailers from input message and arguments
trailer: add data structures and basic functions
Test scripts were taught to notice "-x" option to show shell trace,
as if the tests were run under "sh -x".
* jk/test-shell-trace:
test-lib.sh: support -x option for shell-tracing
t5304: use helper to report failure of "test foo = bar"
t5304: use test_path_is_* instead of "test -f"
Formatting nitpicks to help a (pickier) reimplementation of
AsciiDoc to grok our documentation.
* bc/asciidoc:
Documentation: fix mismatched delimiters in git-imap-send
Documentation: adjust document title underlining
This reverts commit 10f343ea81, whose
output is no longer bit-for-bit equivalent from the older versions
of Git, which the infrastructure to (pretend to) upload tarballs
kernel.org uses depends on.
core.filemode is set automatically when a repo is created.
But when a repo is exported via CIFS or cygwin is mixed with Git for Windows
or Eclipse core.filemode may better be set manually to false.
Update and improve the documentation
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct backtick quoting for some of the modification states to give
consistent web rendering.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid:
# ./t1304-default-acl.sh
ok 1 - checking for a working acl setup
ok 2 - Setup test repo
not ok 3 - Objects creation does not break ACLs with restrictive umask
#
# # SHA1 for empty blob
# check_perms_and_acl .git/objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391
#
not ok 4 - git gc does not break ACLs with restrictive umask
#
# git gc &&
# check_perms_and_acl .git/objects/pack/*.pack
#
# failed 2 among 4 test(s)
1..4
on systems where USER isn't set. It's usually set by the login
process, but it isn't set when launching some Docker images. For
example:
$ docker run --rm debian env
HOME=/
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
HOSTNAME=b2dfdfe797ed
'id -u -n' has been in POSIX from Issue 2 through 2013 [1], so I don't
expect compatibility issues.
[1]: http://pubs.opengroup.org/onlinepubs/9699919799/utilities/id.html
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap atexit()s calls on unthreaded builds to handle callback list
internally.
This is needed because on unthreaded builds, asyncs inherits parent's
atexit() list, that gets run as soon as the async exit()s (and again at
the end of async's parent process). That led to remove temporary files
too early.
Also remove a by-atexit-callback guard against this kind of issue in
clone.c, as this patch makes it redundant.
Fixes test 5537 (temporary shallow file vanished before unpack-objects
could open it)
BTW remove an unused variable in shallow.c.
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Andreas Schwab <schwab@linux-m68k.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Etienne Buira <etienne.buira@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a thin compatibility wrapper around
add_pending_object_with_path. But the only caller is
add_object_array, which is itself just a thin compatibility
wrapper. There are no external callers, so we can just
remove this middle wrapper.
Noticed-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert users of struct child_process to using the managed env_array for
specifying environment variables instead of supplying an array on the
stack or bringing their own argv_array. This shortens and simplifies
the code and ensures automatically that the allocated memory is freed
after use.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to args, add a struct argv_array member to struct child_process
that simplifies specifying the environment for children. It is freed
automatically by finish_command() or if start_command() encounters an
error.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a pack.packSizeLimit is set, we may split the pack data
across multiple packfiles. This means we cannot generate
.bitmap files, as they require that all of the reachable
objects are in the same pack. We check that condition when
we are generating the list of objects to pack (and disable
bitmaps if we are not packing everything), but we forgot to
update it when we notice that we needed to split (which
doesn't happen until the actual write phase).
The resulting bitmaps are quite bogus (they mention entries
that do not exist in the pack!) and can cause a fetch or
push to send insufficient objects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is currently no easy way to ask the revision traversal
machinery to include objects reachable from the index (e.g.,
blobs and trees that have not yet been committed). This
patch adds an option to do so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are given an expiration time like
--unpack-unreachable=2.weeks.ago, we avoid writing out old,
unreachable loose objects entirely, under the assumption
that running "prune" would simply delete them immediately
anyway. However, this is only valid if we computed the same
set of reachable objects as prune would.
In practice, this is the case, because only git-repack uses
the --unpack-unreachable option with an expiration, and it
always feeds as many objects into the pack as possible. But
we can double-check at runtime just to be sure.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is mostly used internally, but it does not hurt to
explain it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we pack all objects, we use only the objects reachable
from references and reflogs. This misses any objects which
are reachable from the index, but not yet referenced.
By itself this isn't a big deal; the objects can remain
loose until they are actually used in a commit. However, it
does create a problem when we drop packed but unreachable
objects. We try to optimize out the writing of objects that
we will immediately prune, which means we must follow the
same rules as prune in determining what is reachable. And
prune uses the index for this purpose.
This is rather uncommon in practice, as objects in the index
would not usually have been packed in the first place. But
it could happen in a sequence like:
1. You make a commit on a branch that references blob X.
2. You repack, moving X into the pack.
3. You delete the branch (and its reflog), so that X is
unreferenced.
4. You "git add" blob X so that it is now referenced only
by the index.
5. You repack again with git-gc. The pack-objects we
invoke will see that X is neither referenced nor
recent and not bother loosening it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This saves us from having to bump the rp_av count when we
add new traversal options.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This does the same thing as our custom code, so let's not
repeat ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's not unreasonable to have a tag that points to a blob
that is not part of the normal history. We do this in
git.git to distribute gpg keys. However, we never explicitly
checked in our test suite that this actually works (i.e.,
that pack-objects actually sends the blob because of the tag
mentioning it).
It does in fact work fine, but a recent patch under
discussion broke this, and the test suite didn't notice.
Let's make the test suite more complete.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call traverse_commit_list, we may have trees and
blobs in the pending array. As we process these, we pass the
"name" field from the pending entry as the path of the
object within the tree (which then becomes the root path if
we recurse into subtrees).
When we set up the traversal in prepare_revision_walk,
though, the "name" field of any pending trees and blobs is
likely to be the ref at which we found the object. We would
not want to make this part of the path (e.g., doing so would
make "git rev-list --objects v2.6.11-tree" in linux.git show
paths like "v2.6.11-tree/Makefile", which is nonsensical).
Therefore prepare_revision_walk sets the name field of each
pending tree and blobs to the empty string.
However, this leaves no room for a caller who does know the
correct path of a pending object to propagate that
information to the revision walker. We can fix this by
making two related changes:
1. Use the "path" field as the path instead of the "name"
field in traverse_commit_list. If the path is not set,
default to "" (which is what we always ended up with in
the current code, because of prepare_revision_walk).
2. In prepare_revision_walk, make a complete copy of the
entry. This makes the path field available to the
walker (if there is one), solving our problem.
Leaving the name field intact is now OK, as we do not
use it as a path due to point (1) above (and we can use
it to make more meaningful error messages if we want).
We also make the original "mode" field available to the
walker, though it does not actually use it.
Note that we still re-add the pending objects and free the
old ones (so we may strdup the path and name only to free
the old ones). This could be made more efficient by simply
copying the object_array entries that we are keeping.
However, that would require more restructuring of the code,
and is not done here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git help everyday" to show the Everyday Git document.
* po/everyday-doc:
doc: add 'everyday' to 'git help'
doc: Makefile regularise OBSOLETE_HTML list building
doc: modernise everyday.txt wording and format in man page style
CGI.pm 4.04 removed the startform method, which had previously been
deprecated in favour of start_form. Changes file for CGI.pm says:
4.04 2014-09-04
[ REMOVED / DEPRECATIONS ]
- startform and endform methods removed (previously deprecated,
you should be using the start_form and end_form methods)
Signed-off-by: Roland Mas <lolando@debian.org>
Reviewed-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests to ensure that filenames start with "./" when
mergetool.writeToTemp is false and do not start with "./" when
mergetool.writeToTemp is true.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach mergetool to write files in a temporary directory when
'mergetool.writeToTemp' is true.
This is helpful for tools such as Eclipse which cannot cope with
multiple copies of the same file in the worktree.
Suggested-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid filenames with multiple dots so that overly-picky tools do
not misinterpret their extension.
Previously, foo/bar.ext in the worktree would result in e.g.
./foo/bar.ext.BASE.1234.ext
This can be improved by having only a single .ext and using
underscore instead of dot so that the extension cannot be
misinterpreted. The resulting path becomes:
./foo/bar_BASE_1234.ext
Suggested-by: Sergio Ferrero <sferrero@ensoftcorp.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prefer "test" over "[ ]" for conditionals.
Prefer "$()" over backticks for command substitutions.
Avoid control structures on a single line with semicolons.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Older versions of meld listed --output in `meld --help`.
Newer versions only mention `meld [OPTIONS...]`.
Improve the checks to catch these newer versions.
Add a `mergetool.meld.hasOutput` configuration to allow
overriding the heuristic.
Reported-by: Andrey Novoseltsev <novoselt@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you resolve a sha1, you can optionally keep any context
found during the resolution, including the path and mode of
a tree entry (e.g., when looking up "HEAD:subdir/file.c").
The add_object_array_with_context function lets you then
attach that context to an entry in a list. Unfortunately,
the interface for doing so is horrible. The object_context
structure is large and most object_array users do not use
it. Therefore we keep a pointer to the structure to avoid
burdening other users too much. But that means when we do
use it that we must allocate the struct ourselves. And the
struct contains a fixed PATH_MAX-sized buffer, which makes
this wholly unsuitable for any large arrays.
We can observe that there is only a single user of the
"with_context" variant: builtin/grep.c. And in that use
case, the only element we care about is the path. We can
therefore store only the path as a pointer (the context's
mode field was redundant with the object_array_entry itself,
and nobody actually cared about the surrounding tree). This
still requires a strdup of the pathname, but at least we are
only consuming the minimum amount of memory for each string.
We can also handle the copying ourselves in
add_object_array_*, and free it as appropriate in
object_array_release_entry.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we try to write a loose object file, we first check
whether that object already exists. If so, we skip the
write as an optimization. However, this can interfere with
prune's strategy of using mtimes to mark files in progress.
For example, if a branch contains a particular tree object
and is deleted, that tree object may become unreachable, and
have an old mtime. If a new operation then tries to write
the same tree, this ends up as a noop; we notice we
already have the object and do nothing. A prune running
simultaneously with this operation will see the object as
old, and may delete it.
We can solve this by "freshening" objects that we avoid
writing by updating their mtime. The algorithm for doing so
is essentially the same as that of has_sha1_file. Therefore
we provide a new (static) interface "check_and_freshen",
which finds and optionally freshens the object. It's trivial
to implement freshening and simple checking by tweaking a
single parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent commit taught git-prune to keep non-recent objects
that are reachable from recent ones. However, pack-objects,
when loosening unreachable objects, tries to optimize out
the write in the case that the object will be immediately
pruned. It now gets this wrong, since its rule does not
reflect the new prune code (and this can be seen by running
t6501 with a strategically placed repack).
Let's teach pack-objects similar logic.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are loosening unreachable packed objects, we do not
bother to process objects that would simply be pruned
immediately anyway. The "would be pruned" check is a simple
comparison, but is about to get more complicated. Let's pull
it out into a separate function.
Note that this is slightly less efficient than the original,
which avoided even opening old packs, since no object in
them could pass the current check, which cares only about
the pack mtime. But the new rules will depend on the exact
object, so we need to perform the check even for old packs.
Note also that we fix a minor buglet when the pack mtime is
exactly the same as the expiration time. The prune code
considers that worth pruning, whereas our check here
considered it worth keeping. This wasn't a big deal. Besides
being unlikely to happen, the result was simply that the
object was loosened and then pruned, missing the
optimization. Still, we can easily fix it while we are here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our current strategy with prune is that an object falls into
one of three categories:
1. Reachable (from ref tips, reflogs, index, etc).
2. Not reachable, but recent (based on the --expire time).
3. Not reachable and not recent.
We keep objects from (1) and (2), but prune objects in (3).
The point of (2) is that these objects may be part of an
in-progress operation that has not yet updated any refs.
However, it is not always the case that objects for an
in-progress operation will have a recent mtime. For example,
the object database may have an old copy of a blob (from an
abandoned operation, a branch that was deleted, etc). If we
create a new tree that points to it, a simultaneous prune
will leave our tree, but delete the blob. Referencing that
tree with a commit will then work (we check that the tree is
in the object database, but not that all of its referred
objects are), as will mentioning the commit in a ref. But
the resulting repo is corrupt; we are missing the blob
reachable from a ref.
One way to solve this is to be more thorough when
referencing a sha1: make sure that not only do we have that
sha1, but that we have objects it refers to, and so forth
recursively. The problem is that this is very expensive.
Creating a parent link would require traversing the entire
object graph!
Instead, this patch pushes the extra work onto prune, which
runs less frequently (and has to look at the whole object
graph anyway). It creates a new category of objects: objects
which are not recent, but which are reachable from a recent
object. We do not prune these objects, just like the
reachable and recent ones.
This lets us avoid the recursive check above, because if we
have an object, even if it is unreachable, we should have
its referent. We can make a simple inductive argument that
with this patch, this property holds (that there are no
objects with missing referents in the repository):
0. When we have no objects, we have nothing to refer or be
referred to, so the property holds.
1. If we add objects to the repository, their direct
referents must generally exist (e.g., if you create a
tree, the blobs it references must exist; if you create
a commit to point at the tree, the tree must exist).
This is already the case before this patch. And it is
not 100% foolproof (you can make bogus objects using
`git hash-object`, for example), but it should be the
case for normal usage.
Therefore for any sequence of object additions, the
property will continue to hold.
2. If we remove objects from the repository, then we will
not remove a child object (like a blob) if an object
that refers to it is being kept. That is the part
implemented by this patch.
Note, however, that our reachability check and the
actual pruning are not atomic. So it _is_ still
possible to violate the property (e.g., an object
becomes referenced just as we are deleting it). This
patch is shooting for eliminating problems where the
mtimes of dependent objects differ by hours or days,
and one is dropped without the other. It does nothing
to help with short races.
Naively, the simplest way to implement this would be to add
all recent objects as tips to the reachability traversal.
However, this does not perform well. In a recently-packed
repository, all reachable objects will also be recent, and
therefore we have to look at each object twice. This patch
instead performs the reachability traversal, then follows up
with a second traversal for recent objects, skipping any
that have already been marked.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We typically iterate over the reachable objects in a
repository by starting at the tips and walking the graph.
There's no easy way to iterate over all of the objects,
including unreachable ones. Let's provide a way of doing so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This drops our line count considerably, and should make
things more readable by keeping the counting logic separate
from the traversal.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of xsize_t is to safely cast an off_t into a size_t
(because we are about to mmap). But in count-objects, we are
summing the sizes in an off_t. Using xsize_t means that
count-objects could fail on a 32-bit system with a 4G
object (not likely, as other parts of git would fail, but
we should at least be correct here).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This saves us from manually traversing the directory
structure ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we mark all reachable objects for pruning, that
includes blobs mentioned by the index. However, we do not
mark these with the SEEN flag, as we do for objects that we
find by traversing (we also do not add them to the pending
list, but that is because there is nothing further to
traverse with them).
This doesn't cause any problems with prune, because it
checks only that the object exists in the global object
hash, and not its flags. However, let's mark these objects
to be consistent and avoid any later surprises.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prune has to walk $GIT_DIR/objects/?? in order to find the
set of loose objects to prune. Other parts of the code
(e.g., count-objects) want to do the same. Let's factor it
out into a reusable for_each-style function.
Note that this is not quite a straight code movement. The
original code had strange behavior when it found a file of
the form "[0-9a-f]{2}/.{38}" that did _not_ contain all hex
digits. It executed a "break" from the loop, meaning that we
stopped pruning in that directory (but still pruned other
directories!). This was probably a bug; we do not want to
process the file as an object, but we should keep going
otherwise (and that is how the new code handles it).
We are also a little more careful with loose object
directories which fail to open. The original code silently
ignored any failures, but the new code will complain about
any problems besides ENOENT.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to add all reflog entries as tips for finding
reachable objects. The revision machinery can already do
this (to support "rev-list --reflog"); we can reuse that
code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To find the set of reachable objects, we add a bunch of
possible sources to our rev_info, call prepare_revision_walk,
and then launch into a custom walker that handles each
object top. This is a subset of what traverse_commit_list
does, so we can just reuse that code (it can also handle
more complex cases like UNINTERESTING commits and pathspecs,
but we don't use those features).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we enter prepare_revision_walk, we have zero or more
entries in our "pending" array. We disconnect that array
from the rev_info, and then process each entry:
1. If the entry is a commit and the --source option is in
effect, we keep a pointer to the object name.
2. Otherwise, we re-add the item to the pending list with
a blank name.
We then throw away the old array by freeing the array
itself, but do not touch the "name" field of each entry. For
any items of type (2), we leak the memory associated with
the name. This commit fixes that by calling object_array_clear,
which handles the cleanup for us.
That breaks (1), though, because it depends on the memory
pointed to by the name to last forever. We can solve that by
making a copy of the name. This is slightly less efficient,
but it shouldn't matter in practice, as we do it only for
the tip commits of the traversal.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's currently no easy way to free the memory associated
with an object_array (and in most cases, we simply leak the
memory in a rev_info's pending array). Let's provide a
helper to make this easier to handle.
We can make use of it in list-objects.c, which does the same
thing by hand (but fails to free the "name" field of each
entry, potentially leaking memory).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is not a lot of code, but it's a logical construct that
should not need to be repeated (and we are about to add a
third repetition).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, callers must do so or risk triggering warnings
-Wchar-subscript (and rightfully so; a signed char might
cause us to use a bogus negative index into the
hexval_table).
While we are dropping the now-unnecessary casts from the
caller in urlmatch.c, we can get rid of similar casts in
actually parsing the hex by using the hexval() helper, which
implicitly casts to unsigned (but note that we cannot
implement isxdigit in terms of hexval(), as it also casts
its return value to unsigned).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check the return value of the callback and stop iterating
if it is non-zero. However, we do not make the non-zero
return value available to the caller, so they have no way of
knowing whether the operation succeeded or not (technically
they can keep their own error flag in the callback data, but
that is unlike our other for_each functions).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add a gitignore file for generated files.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While use of the --reference option to borrow objects from an
existing local repository of the same project is an effective way to
reduce traffic when cloning a project over the network, it makes the
resulting "borrowing" repository dependent on the "borrowed"
repository. After running
git clone --reference=P $URL Q
the resulting repository Q will be broken if the borrowed repository
P disappears.
The way to allow the borrowed repository to be removed is to repack
the borrowing repository (i.e. run "git repack -a -d" in Q); while
power users may know it very well, it is not easily discoverable.
Teach a new "--dissociate" option to "git clone" to run this
repacking for the user.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-difftool used to create a command list script containing $( ... )
and explicitly calls "sh -c" with this list.
Instead, allow mergetool --tool-help to take a mode parameter and call
mergetool directly to invoke the show_tool_help function. This mode
parameter is intented for use solely by difftool.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Helped-by: John Keeping <john@keeping.me.uk>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid filenames with multiple dots so that overly-picky tools do
not misinterpret their extension.
Previously, foo/bar.ext in the worktree would result in e.g.
./foo/bar.ext.BASE.1234.ext
This can be improved by having only a single .ext and using
underscore instead of dot so that the extension cannot be
misinterpreted. The resulting path becomes:
./foo/bar_BASE_1234.ext
Suggested-by: Sergio Ferrero <sferrero@ensoftcorp.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prefer "test" over "[ ]" for conditionals.
Prefer "$()" over backticks for command substitutions.
Avoid control structures on a single line with semicolons.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
AsciiDoc uses a configuration file to implement macros like linkgit,
while Asciidoctor uses Ruby extensions. Implement a Ruby extension that
implements the linkgit macro for Asciidoctor in the same way that
asciidoc.conf does for AsciiDoc.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoctor takes slightly different arguments from AsciiDoc in some
cases. It has a different name for the HTML backend and the "docbook"
backend produces DocBook 5, not DocBook 4.5. Also, Asciidoctor does not
accept the -f option. Move these values into variables so that they can
be overridden by users wishing to use Asciidoctor instead of Asciidoc.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When removal of a loose or packed ref fails, bail out instead of
trying to finish the transaction. This way, a single error message
can be printed (instead of multiple messages being concatenated by
mistake) and the operator can try to solve the underlying problem
before there is a chance to muck things up even more.
In particular, when git fails to remove a ref, git goes on to try to
delete the reflog. Exiting early lets us keep the reflog.
When git succeeds in deleting a ref A and fails to remove a ref B, it
goes on to try to delete both reflogs. It would be better to just
remove the reflog for A, but that would be a more invasive change.
Failing early means we keep both reflogs, which puts the operator in a
good position to understand the problem and recover.
A long term goal is to avoid these problems altogether and roll back
the transaction on failure. That kind of transactionality will have
to wait for a later series (the plan for which is to make all
destructive work happen in a single update of the packed-refs file).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some functions that take a strbuf argument to append an error treat
!err as an indication that the message should be suppressed (e.g.,
ref_update_reject_duplicates). Others write the message to stderr on
!err (e.g., repack_without_refs). Others crash (e.g.,
ref_transaction_update).
Some of these behaviors are for historical reasons and others were
accidents. Luckily no callers pass err == NULL any more. Simplify
by consistently requiring the strbuf argument.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until v2.1.0-rc0~22^2~11 (refs.c: add an err argument to
repack_without_refs, 2014-06-20), repack_without_refs forgot to
provide an error message when commit_packed_refs fails. Even today,
it only provides a message for callers that pass a non-NULL err
parameter. Internal callers in refs.c pass non-NULL err but
"git remote" does not.
That means that "git remote rm" and "git remote prune" can fail
without printing a message about why. Fix them by passing in a
non-NULL err parameter and printing the returned message.
This is the last caller to a ref handling function passing err ==
NULL. A later patch can drop support for err == NULL, avoiding such
problems in the future.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Print a warning message for any bad ref names we find in the repo and
skip them so callers don't have to deal with parsing them.
It might be useful in the future to have a flag where we would not
skip these refs for those callers that want to and are prepared (for
example by using a --format argument with %0 as a delimiter after the
ref name).
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently do not handle badly named refs well:
$ cp .git/refs/heads/master .git/refs/heads/master.....@\*@\\.
$ git branch
fatal: Reference has invalid format: 'refs/heads/master.....@*@\.'
$ git branch -D master.....@\*@\\.
error: branch 'master.....@*@\.' not found.
Users cannot recover from a badly named ref without manually finding
and deleting the loose ref file or appropriate line in packed-refs.
Making that easier will make it easier to tweak the ref naming rules
in the future, for example to forbid shell metacharacters like '`'
and '"', without putting people in a state that is hard to get out of.
So allow "branch --list" to show these refs and allow "branch -d/-D"
and "update-ref -d" to delete them. Other commands (for example to
rename refs) will continue to not handle these refs but can be changed
in later patches.
Details:
In resolving functions, refuse to resolve refs that don't pass the
git-check-ref-format(1) check unless the new RESOLVE_REF_ALLOW_BAD_NAME
flag is passed. Even with RESOLVE_REF_ALLOW_BAD_NAME, refuse to
resolve refs that escape the refs/ directory and do not match the
pattern [A-Z_]* (think "HEAD" and "MERGE_HEAD").
In locking functions, refuse to act on badly named refs unless they
are being deleted and either are in the refs/ directory or match [A-Z_]*.
Just like other invalid refs, flag resolved, badly named refs with the
REF_ISBROKEN flag, treat them as resolving to null_sha1, and skip them
in all iteration functions except for for_each_rawref.
Flag badly named refs (but not symrefs pointing to badly named refs)
with a REF_BAD_NAME flag to make it easier for future callers to
notice and handle them specially. For example, in a later patch
for-each-ref will use this flag to detect refs whose names can confuse
callers parsing for-each-ref output.
In the transaction API, refuse to create or update badly named refs,
but allow deleting them (unless they try to escape refs/ and don't match
[A-Z_]*).
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no straightforward way to grep for all tests dealing with
invalid refs. Put them in a single test script so it is easy to see
what functionality has not been exercised with bad ref names yet.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.7.9-rc1~10^2 (write_head_info(): handle "extra refs" locally,
2012-01-06), this trick to keep track of ".have" refs that are only
valid on the wire and not on the filesystem is not needed any more.
Simplify by removing support for the REFNAME_DOT_COMPONENT flag.
This means we'll be slightly stricter with invalid refs found in a
packed-refs file or during clone. read_loose_refs() already checks
for and skips refnames with .components so it is not affected.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git branch -d" reads the branch it is about to delete, it used
to avoid passing the RESOLVE_REF_READING ('treat missing ref as
error') flag because a symref pointing to a nonexistent ref would show
up as missing instead of as something that could be deleted. To check
if a ref is actually missing, we then check
- is it a symref?
- if not, did it resolve to null_sha1?
Now we pass RESOLVE_REF_NO_RECURSE and the correct information is
returned for a symref even when it points to a missing ref. Simplify
by relying on RESOLVE_REF_READING.
No functional change intended.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a repository gets in a broken state with too much symref nesting,
it cannot be repaired with "git branch -d":
$ git symbolic-ref refs/heads/nonsense refs/heads/nonsense
$ git branch -d nonsense
error: branch 'nonsense' not found.
Worse, "git update-ref --no-deref -d" doesn't work for such repairs
either:
$ git update-ref -d refs/heads/nonsense
error: unable to resolve reference refs/heads/nonsense: Too many levels of symbolic links
Fix both by teaching resolve_ref_unsafe a new RESOLVE_REF_NO_RECURSE
flag and passing it when appropriate.
Callers can still read the value of a symref (for example to print a
message about it) with that flag set --- resolve_ref_unsafe will
resolve one level of symrefs and stop there.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A proposed patch produced broken HEAD reflog entries when checking out
anything other than a branch. The testsuite still passed, so it took
a few days for the bug to be noticed.
Add tests checking the content of the reflog after detaching and
reattaching HEAD so we don't have to rely on manual testing to catch
such problems in the future.
[jn: using 'log -g --format=%H' instead of parsing --oneline output,
resetting state in each test so they can be safely reordered or
skipped]
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref_unsafe takes a boolean argument for reading (a nonexistent ref
resolves successfully for writing but not for reading). Change this to be
a flags field instead, and pass the new constant RESOLVE_REF_READING when
we want this behaviour.
While at it, swap two of the arguments in the function to put output
arguments at the end. As a nice side effect, this ensures that we can
catch callers that were unaware of the new API so they can be audited.
Give the wrapper functions resolve_refdup and read_ref_full the same
treatment for consistency.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No external users call write_ref_sha1 any more so let's declare it static.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change s_update_ref to use a ref transaction for the ref update.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In _commit, ENOTDIR can happen in the call to lock_ref_sha1_basic, either
when we lstat the new refname or if the name checking function reports that
the same type of conflict happened. In both cases, it means that we can not
create the new ref due to a name conflict.
Start defining specific return codes for _commit. TRANSACTION_NAME_CONFLICT
refers to a failure to create a ref due to a name conflict with another ref.
TRANSACTION_GENERIC_ERROR is for all other errors.
When "git fetch" is creating refs, name conflicts differ from other errors in
that they are likely to be resolved by running "git remote prune <remote>".
"git fetch" currently inspects errno to decide whether to give that advice.
Once it switches to the transaction API, it can check for
TRANSACTION_NAME_CONFLICT instead.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change is_refname_available to take a list of strings to exclude when
checking for conflicts instead of just one single name. We can already
exclude a single name for the sake of renames. This generalizes that support.
ref_transaction_commit already tracks a set of refs that are being deleted
in an array. This array is then used to exclude refs from being written to
the packed-refs file. At some stage we will want to change this array to a
struct string_list and then we can pass it to is_refname_available via the
call to lock_ref_sha1_basic. That will allow us to perform transactions
that perform multiple renames as long as there are no conflicts within the
starting or ending state.
For example, that would allow a single transaction that contains two
renames that are both individually conflicting:
m -> n/n
n -> m/m
No functional change intended yet.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Skip using the lock_any_ref_for_update wrapper and call lock_ref_sha1_basic
directly from the commit function.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the check for check_refname_format from lock_any_ref_for_update to
lock_ref_sha1_basic. At some later stage we will get rid of
lock_any_ref_for_update completely. This has no visible impact to callers
except for the inability to lock badly named refs, which is not possible
today already for other reasons.(*)
Keep lock_any_ref_for_update as a no-op wrapper. It is the public facing
version of this interface and keeping it as a separate function will make
it easier to experiment with the internal lock_ref_sha1_basic signature.
(*) For example, if lock_ref_sha1_basic checks the refname format and
refuses to lock badly named refs, it will not be possible to delete
such refs because the first step of deletion is to lock the ref. We
currently already fail in that case because these refs are not recognized
to exist:
$ cp .git/refs/heads/master .git/refs/heads/echo...\*\*
$ git branch -D .git/refs/heads/echo...\*\*
error: branch '.git/refs/heads/echo...**' not found.
This has been broken for a while. Later patches in the series will start
repairing the handling of badly named refs.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We call read_ref_full with a pointer to flags from rename_ref but since
we never actually use the returned flags we can just pass NULL here instead.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the ref transaction API so that we pass the reflog message to the
create/delete/update functions instead of to ref_transaction_commit.
This allows different reflog messages for each ref update in a multi-ref
transaction.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an err argument to delete_ref_loose so that we can pass a descriptive
error string back to the caller. Pass the err argument from transaction
commit to this function so that transaction users will have a nice error
string if the transaction failed due to delete_ref_loose.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This behaves like unlink_or_warn except that on failure it writes the message
to its 'err' argument, which the caller can display in an appropriate way or
ignore.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
lock_ref_sha1_basic is used to lock refs that sit directly in the .git
dir such as HEAD and MERGE_HEAD in addition to the more ordinary refs
under "refs/". Remove the note claiming otherwise.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the function warn_if_unremovable slightly. Additionally, change
behaviour slightly. If we failed to remove the object because the object
does not exist, we can still return success back to the caller since none of
the callers depend on "fail if the file did not exist".
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests for 'git mv moves a submodule' functionality often run
commands like
git mv sub mod/sub
to move a submodule into a subdirectory. Just like plain /bin/mv,
this is supposed to succeed if the mod/ parent directory exists
and fail if it doesn't exist.
Usually these tests mkdir the parent directory beforehand, but some
instead rely on it being left behind by previous tests.
More precisely, when 'git reset --hard' tries to move to a state where
mod/sub is not present any more, it would perform the following
operations:
rmdir("mod/sub")
rmdir("mod")
The first fails with ENOENT because the test script removed mod/sub
with "rm -rf" already, so 'reset --hard' doesn't bother to move on to
the second, and the mod/ directory is kept around.
Better to explicitly remove and re-create the mod/ directory so later
tests don't have to depend on the directory left behind by the earlier
ones at all (making it easier to rearrange or skip some tests in the
file or to tweak 'reset --hard' behavior without breaking unrelated
tests).
Noticed while testing a patch that fixes the reset --hard behavior
described above.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checking out a branch that is set to build on top of another
branch (often, a remote-tracking branch), "git checkout" reports how
your work relates to the other branch, e.g.
Your branch is behind 'origin/master', and can be fast-forwarded.
Back when this feature was introduced, this was only done for
branches that build on remote-tracking branches, but 5e6e2b48 (Make
local branches behave like remote branches when --tracked,
2009-04-01) added support to give the same report for branches that
build on other local branches (i.e. branches whose branch.*.remote
variables are set to '.'). Unlike the support for the branches
building on remote-tracking branches, however, this did not take
into account the fact that branch.*.merge configuration is allowed
to record a shortened branch name.
When branch.*.merge is set to 'master' (not 'refs/heads/master'),
i.e. "my branch builds on the local 'master' branch", this caused
"git checkout" to report:
Your branch is based on 'master', but the upstream is gone.
The upstream is our repository and is definitely not gone, so this
output is nonsense.
The fix is fairly obvious; just like the branch name is DWIMed when
"git pull" merges from the 'master' branch without complaint on such
a branch, the name of the branch the current branch builds upon
needs to be DWIMed the same way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible that a user is trying to run a git command and fail
to realize that they are not in a git repository or working tree.
When trying to complete an operation, __git_refs would fall to a
degenerate case and attempt to use "git for-each-ref", which would
emit the error.
Hide this error message coming from "git for-each-ref".
Signed-off-by: John Szakmeister <john@szakmeister.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally the color-parsing function was used only for
config variables. It made sense to pass the variable name so
that the die() message could be something like:
$ git -c color.branch.plain=bogus branch
fatal: bad color value 'bogus' for variable 'color.branch.plain'
These days we call it in other contexts, and the resulting
error messages are a little confusing:
$ git log --pretty='%C(bogus)'
fatal: bad color value 'bogus' for variable '--pretty format'
$ git config --get-color foo.bar bogus
fatal: bad color value 'bogus' for variable 'command line'
This patch teaches color_parse to complain only about the
value, and then return an error code. Config callers can
then propagate that up to the config parser, which mentions
the variable name. Other callers can provide a custom
message. After this patch these three cases now look like:
$ git -c color.branch.plain=bogus branch
error: invalid color value: bogus
fatal: unable to parse 'color.branch.plain' from command-line config
$ git log --pretty='%C(bogus)'
error: invalid color value: bogus
fatal: unable to parse --pretty format
$ git config --get-color foo.bar bogus
error: invalid color value: bogus
fatal: unable to parse default color value
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many config-parsing helpers, like parse_branch_color_slot,
take the name of a config variable and an offset to the
"slot" name (e.g., "color.branch.plain" is passed along with
"13" to effectively pass "plain"). This is leftover from the
time that these functions would die() on error, and would
want the full variable name for error reporting.
These days they do not use the full variable name at all.
Passing a single pointer to the slot name is more natural,
and lets us more easily adjust the callers to use skip_prefix
to avoid manually writing offset numbers.
This is effectively a continuation of 9e1a5eb, which did the
same for parse_diff_color_slot. This patch covers all of the
remaining similar constructs.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/lockfile-stdio:
commit_packed_refs(): reimplement using fdopen_lock_file()
dump_marks(): reimplement using fdopen_lock_file()
fdopen_lock_file(): access a lockfile using stdio
The lockfile API and its users have been cleaned up.
* mh/lockfile: (38 commits)
lockfile.h: extract new header file for the functions in lockfile.c
hold_locked_index(): move from lockfile.c to read-cache.c
hold_lock_file_for_append(): restore errno before returning
get_locked_file_path(): new function
lockfile.c: rename static functions
lockfile: rename LOCK_NODEREF to LOCK_NO_DEREF
commit_lock_file_to(): refactor a helper out of commit_lock_file()
trim_last_path_component(): replace last_path_elm()
resolve_symlink(): take a strbuf parameter
resolve_symlink(): use a strbuf for internal scratch space
lockfile: change lock_file::filename into a strbuf
commit_lock_file(): use a strbuf to manage temporary space
try_merge_strategy(): use a statically-allocated lock_file object
try_merge_strategy(): remove redundant lock_file allocation
struct lock_file: declare some fields volatile
lockfile: avoid transitory invalid states
git_config_set_multivar_in_file(): avoid call to rollback_lock_file()
dump_marks(): remove a redundant call to rollback_lock_file()
api-lockfile: document edge cases
commit_lock_file(): rollback lock file on failure to rename
...
"git daemon" (with NO_IPV6 build configuration) used to incorrectly
use the hostname even when gethostbyname() reported that the given
hostname is not found.
* rs/daemon-fixes:
daemon: remove write-only variable maxfd
daemon: fix error message after bind()
daemon: handle gethostbyname() error
Usually running a test under "-v" makes it clear which
command is failing. However, sometimes it can be useful to
also see a complete trace of the shell commands being run in
the test. You can do so without any support from the test
suite by running "sh -x tXXXX-foo.sh". However, this
produces quite a large bit of output, as we see a trace of
the entire test suite.
This patch instead introduces a "-x" option to the test
scripts (i.e., "./tXXXX-foo.sh -x"). When enabled, this
turns on "set -x" only for the tests themselves. This can
still be a bit verbose, but should keep things to a more
manageable level. You can even use "--verbose-only" to see
the trace only for a specific test.
The implementation is a little invasive. We turn on the "set
-x" inside the "eval" of the test code. This lets the eval
itself avoid being reported in the trace (which would be
long, and redundant with the verbose listing we already
showed). And then after the eval runs, we do some trickery
with stderr to avoid showing the "set +x" to the user.
We also show traces for test_cleanup functions (since they
can impact the test outcome, too). However, we do avoid
running the noop ":" cleanup (the default if the test does
not use test_cleanup at all), as it creates unnecessary
noise in the "set -x" output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at it add git-interpret-trailers to "command-list.txt".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let the user specify a command that will give on its standard output
the value to use for the specified trailer.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds the "git interpret-trailers" command.
This command uses the previously added process_trailers()
function in trailer.c.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds the process_trailers() function that
calls all the previously added processing functions
and then prints the results on the standard output.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Read trailers from a file or from stdin, parse the trailers and then
put the result into a doubly linked list.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parse the trailer command line arguments and put
the result into an arg_tok doubly linked list.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Read the configuration to get trailer information, and then process
it and store it in a doubly linked list.
The config information is stored in the list whose first item is
pointed to by:
static struct trailer_item *first_conf_item;
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement the logic to process trailers from the input message
and from arguments.
At the beginning trailers from the input message are in their
own "in_tok" doubly linked list, and trailers from arguments
are in their own "arg_tok" doubly linked list.
The lists are traversed and when an "arg_tok" should be "applied",
it is removed from its list and inserted into the "in_tok" list.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will use a doubly linked list to store all information
about trailers and their configuration.
This way we can easily remove or add trailers to or from
trailer lists while traversing the lists in either direction.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for git-imap-send uses block delimiters with
mismatched lengths, which Asciidoctor doesn't support. As a result, the
page is misrendered. Adjust the delimiters so that they are of the same
length.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
AsciiDoc specification states that in two-line titles, the title
underline has to be the same length as the title text, plus or minus two
characters. Asciidoctor, however, requires that this must be plus or
minus one character. Adjust the underlines to be the same length as the
title text to improve compatibility.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Under NO_PTHREADS build, we warn when delta_search_threads is not
set to 1, because that is the only sensible value on a single
threaded build.
However, the auto detection that kicks in when that variable is set
to 0 (e.g. there is no configuration variable or command line option,
or an explicit --threads=0 is given from the command line to override
the pack.threads configuration to force auto-detection) was not done
before the condition to issue this warning was tested.
Move the auto-detection code and place it at an appropriate spot.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
type_cas_lock/unlock() should be defined as no-op for NO_PTHREADS
build, just like all the other locking primitives.
Signed-off-by: Etienne Buira <etienne.buira@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The argv_array used in unpack() is never freed. Instead of adding
explicit calls to argv_array_clear() use the args member of struct
child_process and let run_command() and friends clean up for us.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For small outputs, we sometimes use:
test "$(some_cmd)" = "something we expect"
instead of a full test_cmp. The downside of this is that
when it fails, there is no output at all from the script.
Let's introduce a small helper to make tests easier to
debug.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is slightly more robust (checking "! test -f" would not
notice a directory of the same name, though that is not
likely to happen here). It also makes debugging easier, as
the test script will output a message on failure.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "Everyday GIT With 20 Commands Or So" is not accessible via the
Git help system. Move everyday.txt to giteveryday.txt so that "git
help everyday" works, and create a new placeholder file everyday.html
to refer people who follow existing URLs to the updated location.
giteveryday.txt now formats well with AsciiDoc as a man page and
refreshed content to a more command modern style.
Add 'everyday' to the help --guides list and update git(1) and 5
other links to giteveryday.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have had "git -C $there" to first go to a different directory
and run a Git command without changing the arguments for quite some
time. Use it instead of (cd $there && git ...) in the completion
script.
This allows us to lose the work-around for misfeatures of modern
interactive-minded shells that make "cd" unusable in scripts (e.g.
end users' $CDPATH taking us to unexpected places in any POSIX
shell, and chpwd functions spewing unwanted output in zsh).
Based on Øystein Walle's idea, which was raised during the
discussion on the solution by Brandon Turner for a problem zsh users
had with RVM which mucks with chpwd_functions in users' environments
(https://github.com/wayneeseguin/rvm/issues/3076).
As $root variable, which is used to direct where to chdir to, is set
to "." based on if $2 to __git_index_files is set (not if it is empty),
the only caller of the function is fixed not to pass the optional $2
when it does not want us to switch to a different directory. Otherwise
we would end up doing "git -C '' command...", which would not work.
Maybe we would want "git -C '' command..." to mean "do not chdir
anywhere", but that is a spearate topic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Neither the AsciiDoc nor the Asciidoctor documentation specify whether
the same number of delimiter characters must be used to end a block as
to begin it, although both sets of documentation show exactly matching
pairs. AsciiDoc allows mismatches, but AsciiDoctor apparently does not.
Adjust the pretty formats documentation to use matching pairs to prevent
a misrendering where the remainder of the document was rendered as a
listing block.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running a required clean filter, we do not have to mmap the
original before feeding the filter. Instead, stream the file
contents directly to the filter and process its output.
* sp/stream-clean-filter:
sha1_file: don't convert off_t to size_t too early to avoid potential die()
convert: stream from fd to required clean filter to reduce used address space
copy_fd(): do not close the input file descriptor
mmap_limit: introduce GIT_MMAP_LIMIT to allow testing expected mmap size
memory_limit: use git_env_ulong() to parse GIT_ALLOC_LIMIT
config.c: add git_env_ulong() to parse environment variable
convert: drop arguments other than 'path' from would_convert_to_git()
Allow "git push" request to be signed, so that it can be verified and
audited, using the GPG signature of the person who pushed, that the
tips of branches at a public repository really point the commits
the pusher wanted to, without having to "trust" the server.
* jc/push-cert: (24 commits)
receive-pack::hmac_sha1(): copy the entire SHA-1 hash out
signed push: allow stale nonce in stateless mode
signed push: teach smart-HTTP to pass "git push --signed" around
signed push: fortify against replay attacks
signed push: add "pushee" header to push certificate
signed push: remove duplicated protocol info
send-pack: send feature request on push-cert packet
receive-pack: GPG-validate push certificates
push: the beginning of "git push --signed"
pack-protocol doc: typofix for PKT-LINE
gpg-interface: move parse_signature() to where it should be
gpg-interface: move parse_gpg_output() to where it should be
send-pack: clarify that cmds_sent is a boolean
send-pack: refactor inspecting and resetting status and sending commands
send-pack: rename "new_refs" to "need_pack_data"
receive-pack: factor out capability string generation
send-pack: factor out capability string generation
send-pack: always send capabilities
send-pack: refactor decision to send update per ref
send-pack: move REF_STATUS_REJECT_NODELETE logic a bit higher
...
Some MUAs mangled a line in a message that begins with "From " to
">From " when writing to a mailbox file and feeding such an input to
"git am" used to lose such a line.
* jk/mbox-from-line:
mailinfo: work around -Wstring-plus-int warning
mailinfo: make ">From" in-body header check more robust
Continue where ae021d87 (use skip_prefix to avoid magic numbers) left off
and use skip_prefix() in more places for determining the lengths of prefix
strings to avoid using dependent constants and other indirect methods.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output file hasn't been created at this point, yet, so there is no
need to delete it when exiting early.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Free the buffer returned by read_sha1_file() even if no valid tagger
line is found.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For Tk 8.5 the "wordprocessor" mode allows us to get a bit fancy for merge
diffs and intend the tabs by one to compensate for the additional diff
marker at the line start.
The code is heavily based on how gitk handles tabs.
Signed-off-by: Michael Lutz <michi@icosahedron.de>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Add a new function, fdopen_lock_file(), which returns a FILE pointer
open to the lockfile. If a stream is open on a lock_file object, it is
closed using fclose() on commit, rollback, or close_lock_file().
This change will allow callers to use stdio to write to a lockfile
without having to muck around in the internal representation of the
lock_file object (callers will be rewritten in upcoming commits).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the interface declaration for the functions in lockfile.c from
cache.h to a new file, lockfile.h. Add #includes where necessary (and
remove some redundant includes of cache.h by files that already
include builtin.h).
Move the documentation of the lock_file state diagram from lockfile.c
to the new header file.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
lockfile.c contains the general API for locking any file. Code
specifically about the index file doesn't belong here.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers who don't pass LOCK_DIE_ON_ERROR might want to examine errno
to see what went wrong, so restore errno before returning.
In fact this function only has one caller, add_to_alternates_file(),
and it *does* use LOCK_DIE_ON_ERROR, but, you know, think of future
generations.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function to return the path of the file that is locked by a
lock_file object. This reduces the knowledge that callers have to have
about the lock_file layout.
Suggested-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it harder to misread the name as LOCK_NODE_REF.
Suggested-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit_locked_index(), when writing to an alternate index file,
duplicates (poorly) the code in commit_lock_file(). And anyway, it
shouldn't have to know so much about the internal workings of lockfile
objects. So extract a new function commit_lock_file_to() that does the
work common to the two functions, and call it from both
commit_lock_file() and commit_locked_index().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite last_path_elm() to take a strbuf parameter and to trim off the
last path name element in place rather than returning a pointer to the
beginning of the last path name element. This simplifies the function
a bit and makes it integrate better with its caller, which is now also
strbuf-based. Rename the function accordingly and a bit less tersely.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change resolve_symlink() to take a strbuf rather than a string as
parameter. This simplifies the code and removes an arbitrary pathname
length restriction. It also means that lock_file's filename field no
longer needs to be initialized to a large size.
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aside from shortening and simplifying the code, this removes another
place where the path name length is arbitrarily limited.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For now, we still make sure to allocate at least PATH_MAX characters
for the strbuf because resolve_symlink() doesn't know how to expand
the space for its return value. (That will be fixed in a moment.)
Another alternative would be to just use a strbuf as scratch space in
lock_file() but then store a pointer to the naked string in struct
lock_file. But lock_file objects are often reused. By reusing the
same strbuf, we can avoid having to reallocate the string most times
when a lock_file object is reused.
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid relying on the filename length restrictions that are currently
checked by lock_file().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even the one lockfile object needn't be allocated each time the
function is called. Instead, define one statically-allocated
lock_file object and reuse it for every call.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By the time the "if" block is entered, the lock_file instance from the
main function block is no longer in use, so re-use that one instead of
allocating a second one.
Note that the "lock" variable in the "if" block shadowed the "lock"
variable at function scope, so the only change needed is to remove the
inner definition.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function remove_lock_file_on_signal() is used as a signal handler.
It is not realistic to make the signal handler conform strictly to the
C standard, which is very restrictive about what a signal handler is
allowed to do. But let's increase the likelihood that it will work:
The lock_file_list global variable and several fields from struct
lock_file are used by the signal handler. Declare those values
"volatile" to (1) force the main process to write the values to RAM
promptly, and (2) prevent updates to these fields from being reordered
in a way that leaves an opportunity for a jump to the signal handler
while the object is in an inconsistent state.
We don't mark the filename field volatile because that would prevent
the use of strcpy(), and it is anyway unlikely that a compiler
re-orders a strcpy() call across other expressions. So in practice it
should be possible to get away without "volatile" in the "filename"
case.
Suggested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because remove_lock_file() can be called any time by the signal
handler, it is important that any lock_file objects that are in the
lock_file_list are always in a valid state. And since lock_file
objects are often reused (but are never removed from lock_file_list),
that means we have to be careful whenever mutating a lock_file object
to always keep it in a well-defined state.
This was formerly not the case, because part of the state was encoded
by setting lk->filename to the empty string vs. a valid filename. It
is wrong to assume that this string can be updated atomically; for
example, even
strcpy(lk->filename, value)
is unsafe. But the old code was even more reckless; for example,
strcpy(lk->filename, path);
if (!(flags & LOCK_NODEREF))
resolve_symlink(lk->filename, max_path_len);
strcat(lk->filename, ".lock");
During the call to resolve_symlink(), lk->filename contained the name
of the file that was being locked, not the name of the lockfile. If a
signal were raised during that interval, then the signal handler would
have deleted the valuable file!
We could probably continue to use the filename field to encode the
state by being careful to write characters 1..N-1 of the filename
first, and then overwrite the NUL at filename[0] with the first
character of the filename, but that would be awkward and error-prone.
So, instead of using the filename field to determine whether the
lock_file object is active, add a new field "lock_file::active" for
this purpose. Be careful to set this field only when filename really
contains the name of a file that should be deleted on cleanup.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After commit_lock_file() is called, then the lock_file object is
necessarily either committed or rolled back. So there is no need to
call rollback_lock_file() again in either of these cases.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commit_lock_file() fails, it now always calls
rollback_lock_file() internally, so there is no need to call that
function here.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Document the behavior of commit_lock_file() when it fails, namely
that it rolls back the lock_file object and sets errno
appropriately.
* Document the behavior of rollback_lock_file() when called for a
lock_file object that has already been committed or rolled back,
namely that it is a NOOP.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If rename() fails, call rollback_lock_file() to delete the lock file
(in case it is still present) and reset the filename field to the
empty string so that the lockfile object is left in a valid state.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If closing an open lockfile fails, then we cannot be sure of the
contents of the lockfile, so there is nothing sensible to do but
delete it. This change also insures that the lock_file object is left
in a defined state in this error path (namely, unlocked).
The only caller that is ultimately affected by this change is
try_merge_strategy() -> write_locked_index(), which can call
close_lock_file() via various execution paths. This caller uses a
static lock_file object which previously could have been reused after
a failed close_lock_file() even though it was still in locked state.
This change causes the lock_file object to be unlocked on failure,
thus fixing this error-handling path.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was previously a bug to call commit_lock_file() with a lock_file
object that was not active (an illegal access would happen within the
function). It was presumably never done, but this would be an easy
programming error to overlook. So before continuing, do a consistency
check that the lock_file object really is locked.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a bit easier to read than the old version, which nested part
of the non-error code in an "if" block.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Declare the return value to be const to make it clear that we aren't
giving callers permission to write over the string that it points at.
(The return value is the filename field of a struct lock_file, which
can be used by a signal handler at any time and therefore shouldn't be
tampered with.)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's bad manners. Especially since there could be a signal during the
call to unlink_or_warn(), in which case the signal handler will see
the wrong filename and delete the reference file, leaving the lockfile
behind.
So make our own copy to work with.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few places that use these values, so define constants for
them.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the valid states of lock_file objects, how they get into each
state, and how the state is encoded in the object's fields.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of this change is to make the state diagram for
lock_file objects simpler and deterministic.
If locking fails, lock_file() sometimes leaves the lock_file object
partly initialized, but sometimes not. It sometimes registers the
object in lock_file_list, but sometimes not. This makes the state
diagram for lock_file objects effectively indeterministic and hard
to reason about. A future patch will also change the filename field
into a strbuf, which needs more involved initialization, so it will
become even more important that the state of a lock_file object is
well-defined after a failed attempt to lock.
The ambiguity doesn't currently have any ill effects, because
lock_file objects cannot be removed from the lock_file_list anyway.
But to make it easier to document and reason about the code, make
this behavior consistent: *always* initialize the lock_file object
and *always* register it in lock_file_list the first time it is
used, regardless of whether an error occurs.
While we're at it, make sure that all of the lock_file fields are
initialized to values appropriate for an unlocked object; the caller
is only responsible for making sure that on_list is set to zero before
the first time it is used.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is an error copying the old contents to the lockfile, roll
back the lockfile before exiting so that the lockfile is not held
until process cleanup.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the call to adjust_shared_perm() fails, lock_file returns -1, which
to the caller looks like any other failure to lock the file. So in
this case, roll back the lockfile before returning so that the lock
file is deleted immediately and the lockfile object is left in a
predictable state (namely, unlocked). Previously, the lockfile was
retained until process cleanup in this situation.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rolling back the lockfile, call close_lock_file() so that the
lock_file's fd field gets set back to -1. This keeps the lock_file
object in a valid state, which is important because these objects are
allowed to be reused. It also makes it unnecessary to check whether
the file has already been closed, because close_lock_file() takes care
of that.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document a couple more functions and the flags argument as used by
hold_lock_file_for_update() and hold_lock_file_for_append().
Reorganize the document to make it more accessible.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Junio Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It became unused when 6573faff (NO_IPV6 support for git daemon) replaced
select() with poll().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user-supplied hostname can't be found then we should not use it.
We already avoid doing that in the non-NO_IPV6 case by checking if the
return value of getaddrinfo() is zero (success). Do the same in the
NO_IPV6 case and make sure the return value of gethostbyname() isn't
NULL before dereferencing this pointer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the first 18 bytes of the SHA1's of all entries are the same then
sha1_pos() dies and reports that the lower and upper limits of the
binary search were the same that this wasn't supposed to happen. This
is wrong because the remaining two bytes could still differ.
Furthermore: It wouldn't be a problem if they actually were the same,
i.e. if all entries have the same SHA1. The code already handles
duplicates just fine. Simply remove the erroneous check.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
FreeBSD's printf(1) doesn't accept empty strings for numerical format
specifiers:
$ printf "%d\n" "" >/dev/null; echo $?
printf: : expected numeric value
1
Initialize the AWK variable c to make sure the shell variable
subtree_count always contains a numerical value, in order to keep the
subsequently called printf happy.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
setitmer(2) and related API elements can be configured from
Makefile but autoconf did not know about it.
* jt/itimer-autoconf:
autoconf: check for setitimer()
autoconf: check for struct itimerval
git-compat-util.h: add missing semicolon after struct itimerval
"git merge-recursive" had a small bug that could have made it
mishandle "one side deleted, the other side did not touch it" in a
rare corner case, where the other side actually did touch to cause
the blob object names to be different but both blobs before and
after the change normalize to the same (e.g. correcting mistake to
check in a blob with CRLF line endings by replacing it with another
blob that records the same contents with LF line endings).
* sb/merge-recursive-copy-paste-fix:
merge-recursive: remove stale commented debugging code
merge-recursive: fix copy-paste mistake
We used to get confused when a process called us with SIGPIPE
ignored; we do want to die with SIGPIPE when the output is not
read by default, and do ignore the signal when appropriate.
* pr/use-default-sigpipe-setting:
mingw.h: add dummy functions for sigset_t operations
unblock and unignore SIGPIPE
"git fsck" failed to report that it found corrupt objects via its
exit status in some cases.
* jk/fsck-exit-code-fix:
fsck: return non-zero status on missing ref tips
fsck: exit with non-zero status upon error from fsck_obj()
"git config --add section.var val" used to lose existing
section.var whose value was an empty string.
* ta/config-add-to-empty-or-true-fix:
config: avoid a funny sentinel value "a^"
make config --add behave correctly for empty and NULL values
Reachability check (used in "git prune" and friends) did not add a
detached HEAD as a starting point to traverse objects still in use.
* mk/reachable-protect-detached-head:
reachable.c: add HEAD to reachability starting commits
An attempt to remove the entire tree in the "git fast-import" input
stream caused it to misbehave.
* mb/fast-import-delete-root:
fast-import: fix segfault in store_tree()
t9300: test filedelete command
When receiving an invalid pack stream that records the same object
twice, multiple threads got confused due to a race.
* jk/index-pack-threading-races:
index-pack: fix race condition with duplicate bases
"git push" over HTTP transport had an artificial limit on number of
refs that can be pushed imposed by the command line length.
* jk/send-pack-many-refspecs:
send-pack: take refspecs over stdin
* so/rebase-doc:
Documentation/git-rebase.txt: <upstream> must be given to specify <branch>
Documentation/git-rebase.txt: -f forces a rebase that would otherwise be a no-op
Oracle Studio compilers don't allow for static variables in
functions that are defined to be inline. GNU C does permit this.
Let's reference the C99 standard though, which doesn't allow for
inline functions to contain modifiable static variables.
Signed-off-by: Ben Walton <bdwalton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some MUAs mangled a line in a message that begins with "From " to
">From " when writing to a mailbox file and feeding such an input
to "git am" used to lose such a line.
* jk/mbox-from-line:
mailinfo: work around -Wstring-plus-int warning
mailinfo: make ">From" in-body header check more robust
"rev-parse --verify --quiet $name" is meant to quietly exit with a
non-zero status when $name is not a valid object name, but still
gave error messages in some cases.
* da/rev-parse-verify-quiet:
stash: prefer --quiet over shell redirection of the standard error stream
refs: make rev-parse --quiet actually quiet
t1503: use test_must_be_empty
Documentation: a note about stdout for git rev-parse --verify --quiet
The pretty-format specifier "%d", which expanded to " (tagname)"
for a tagged commit, gained a cousin "%D" that just gives the
"tagname" without frills.
* hj/pretty-naked-decoration:
pretty: add %D format specifier
Running "git rebase" without giving a specific commit with respect
to which the operation is done enables --fork-point mode, while
telling the command to rebase with respect to a specific commit,
i.e. "git rebase <upstream>" does not.
This was not mentioned in the DESCRIPTION section of the manual
page, even though the case of omitted <upstream> was otherwise
discussed. That in turn made actual behavior of vanilla "git
rebase" hardly discoverable.
While we are at it, clarify the --fork-point description itself as
well.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use write_script to create the helper "askpass" script, instead of
hand-creating it with hardcoded "#!/bin/sh" to make sure we use the
shell the user told us to use.
Signed-off-by: Ben Walton <bdwalton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'maint' of git://github.com/git-l10n/git-po:
l10n: de.po: use comma before "um"
l10n: de.po: change Email to E-Mail
po/TEAMS: add new member to German translation team
pre- and post-receive hooks are no longer required to read all
their inputs.
* jc/ignore-sigpipe-while-running-hooks:
receive-pack: allow hooks to ignore its standard input stream
Code cleanup.
* jk/prune-packed-server-info:
repack: call prune_packed_objects() and update_server_info() directly
server-info: clean up after writing info/packs
make update-server-info more robust
prune-packed: fix minor memory leak
Using "hash-object --literally", test one of the new breakages
js/fsck-tag-validation topic teaches "fsck" to catch is caught.
* jc/hash-object-fsck-tag:
t1450: make sure fsck detects a malformed tagger line
"hash-object" learned a new "--literally" option to hash any random
garbage into a loose object, to allow us to create a test data for
mechanisms to catch corrupt objects.
* jc/hash-object:
hash-object: add --literally option
hash-object: pass 'write_object' as a flag
hash-object: reduce file-scope statics
Teach "git fsck" to inspect the contents of annotated tag objects.
* js/fsck-tag-validation:
Make sure that index-pack --strict checks tag objects
Add regression tests for stricter tag fsck'ing
fsck: check tag objects' headers
Make sure fsck_commit_buffer() does not run out of the buffer
fsck_object(): allow passing object data separately from the object itself
Refactor type_from_string() to allow continuing after detecting an error
Optimize the check to see if a ref $F can be created by making sure
no existing ref has $F/ as its prefix, which especially matters in
a repository with a large number of existing refs.
* jk/faster-name-conflicts:
refs: speed up is_refname_available
Optimize the code path to write out the packed-refs file, which
especially matters in a repository with a large number of refs.
* jk/write-packed-refs-via-stdio:
refs: write packed_refs file using stdio
clang gives the following warning:
builtin/receive-pack.c:327:35: error: sizeof on array function
parameter will return size of 'unsigned char *' instead of 'unsigned
char [20]' [-Werror,-Wsizeof-array-argument]
git_SHA1_Update(&ctx, out, sizeof(out));
^
builtin/receive-pack.c:292:37: note: declared here
static void hmac_sha1(unsigned char out[20],
^
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was reported that the allocated stack space was too small for
some archs openSUSE buildfarm runs the tests on. Double it while
also doubling the amount of data to be handled.
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Suggested-by: Jeff King <peff@peff.net>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following issue was found by scan.coverity.com (ID: 1049510),
and claimed to be likely a copy-paste mistake.
Introduced in 331a1838b (2010-07-02, Try normalizing files
to avoid delete/modify conflicts when merging), which is
quite a long time ago, so I'm rather unsure if it's of any impact
or just went unnoticed.
The line after the changed line has a comparison of 'o.len' to 'a.len',
so we should assume the lengths may be different.
I'd be happy to have a test for this bug(?) attached to
t6031-merge-recursive.sh, but I did not manage to
come up with a test in a reasonable amount of time.
Signed-off-by: Stefan Beller <stefanbeller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The just-released Apple Xcode 6.0.1 has -Wstring-plus-int enabled by
default which complains about pointer arithmetic applied to a string
literal:
builtin/mailinfo.c:303:24: warning:
adding 'long' to a string does not append to the string
return !memcmp(SAMPLE + (cp - line), cp, strlen(SAMPLE) ...
~~~~~~~^~~~~~~~~~~~~
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows does not have POSIX-like signals, and so we ignore all
operations on the non-existent signal mask machinery.
Do not turn sigemptyset into a function, but leave it a macro that
erases the code in the argument because it is used to set sa_mask
of a struct sigaction, but our dummy in mingw.h does not have that
member.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xsize_t() checks if an off_t argument can be safely converted to
a size_t return value. If the check is executed too early, it could
fail for large files on 32-bit architectures even if the size_t code
path is not taken. Other paths might be able to handle the large file.
Specifically, index_stream_convert_blob() is able to handle a large file
if a filter is configured that returns a small result.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the code simpler and shorter by avoiding repetitive use of
string length variables and leaving memory allocation to strbuf
functions.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Deduplicate code common to both branches of if statements.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch fixes two problems with using :(glob) (or even "*.c"
without ":(glob)").
The first one is we forgot to turn on the 'recursive' flag in struct
pathspec. Without that, tree_entry_interesting() will not mark
potential directories "interesting" so that it can confirm whether
those directories have anything matching the pathspec.
The marking directories interesting has a side effect that we need to
walk inside a directory to realize that there's nothing interested in
there. By that time, 'archive' code has already written the (empty)
directory down. That means lots of empty directories in the result
archive.
This problem is fixed by lazily writing directories down when we know
they are actually needed. There is a theoretical bug in this
implementation: we can't write empty trees/directories that match that
pathspec.
path_exists() is also made stricter in order to detect non-matching
pathspec because when this 'recursive' flag is on, we most likely
match some directories. The easiest way is not consider any
directories "matched".
Noticed-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/unpack-trees-checkout-m-carry-deletion:
checkout -m: attempt merge when deletion of path was staged
unpack-trees: use 'cuddled' style for if-else cascade
unpack-trees: simplify 'all other failures' case
* jc/apply-ws-prefix:
apply: omit ws check for excluded paths
apply: hoist use_patch() helper for path exclusion up
apply: use the right attribute for paths in non-Git patches
Conflicts:
builtin/apply.c
* jk/pretty-empty-format:
pretty: make empty userformats truly empty
pretty: treat "--format=" as an empty userformat
revision: drop useless string offset when parsing "--pretty"
"git fsck" failed to report that it found corrupt objects via its
exit status in some cases.
* jk/fsck-exit-code-fix:
fsck: return non-zero status on missing ref tips
fsck: exit with non-zero status upon error from fsck_obj()
"git config --add section.var val" used to lose existing
section.var whose value was an empty string.
* ta/config-add-to-empty-or-true-fix:
config: avoid a funny sentinel value "a^"
make config --add behave correctly for empty and NULL values
Add checks for a common programming mistake to assign the same
short option name to two separate options to help developers.
* jc/parseopt-verify-short-name:
parse-options: detect attempt to add a duplicate short option name
* tb/crlf-tests:
MinGW: update tests to handle a native eol of crlf
Makefile: propagate NATIVE_CRLF to C
t0027: Tests for core.eol=native, eol=lf, eol=crlf
Code clean-up.
* rs/more-uses-of-skip-prefix:
pack-write: simplify index_pack_lockfile using skip_prefix() and xstrfmt()
connect: simplify check_ref() using skip_prefix() and starts_with()
An attempt to remove the entire tree in the "git fast-import" input
stream caused it to misbehave.
* mb/fast-import-delete-root:
fast-import: fix segfault in store_tree()
t9300: test filedelete command
A broken reimplementation of Git could write an invalid index that
records both stage #0 and higher stage entries for the same path.
Notice and reject such an index, as there is no sensible fallback
(we do not know if the broken tool wanted to resolve and forgot to
remove higher stage entries, or if it wanted to unresolve and
forgot to remove the stage#0 entry).
* jp/index-with-corrupt-stages:
read_index_unmerged(): remove unnecessary loop index adjustment
read_index_from(): catch out of order entries when reading an index file
When receiving an invalid pack stream that records the same object
twice, multiple threads got confused due to a race. We should
reject or correct such a stream upon receiving, but that will be a
larger change.
* jk/index-pack-threading-races:
index-pack: fix race condition with duplicate bases
Code clean-up.
* jk/commit-author-parsing:
determine_author_info(): copy getenv output
determine_author_info(): reuse parsing functions
date: use strbufs in date-formatting functions
record_author_date(): use find_commit_header()
record_author_date(): fix memory leak on malformed commit
commit: provide a function to find a header in a buffer
"log --date=iso" uses a slight variant of ISO 8601 format that is
made more human readable. A new "--date=iso-strict" option gives
datetime output that is more strictly conformant.
* bb/date-iso-strict:
pretty: provide a strict ISO 8601 date format
Sometimes users want to report a bug they experience on their
repository, but they are not at liberty to share the contents of
the repository. "fast-export" was taught an "--anonymize" option
to replace blob contents, names of people and paths and log
messages with bland and simple strings to help them.
* jk/fast-export-anonymize:
docs/fast-export: explain --anonymize more completely
teach fast-export an --anonymize option
The number of refs that can be pushed at once over smart HTTP was
limited by the command line length. The limitation has been lifted
by passing these refs from the standard input of send-pack.
* jk/send-pack-many-refspecs:
send-pack: take refspecs over stdin
Use `git rev-parse --verify --quiet` instead of redirecting
stderr to /dev/null.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a reflog is deleted, e.g. when "git stash" clears its stashes,
"git rev-parse --verify --quiet" dies:
fatal: Log for refs/stash is empty.
The reason is that the get_sha1() code path does not allow us
to suppress this message.
Pass the flags bitfield through get_sha1_with_context() so that
read_ref_at() can suppress the message.
Use get_sha1_with_context1() instead of get_sha1() in rev-parse
so that the --quiet flag is honored.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new format specifier, '%D' that is identical in behaviour to '%d',
except that it does not include the ' (' prefix or ')' suffix provided
by '%d'.
Signed-off-by: Harry Jeffery <harry@exec64.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Blocked and ignored signals -- but not caught signals -- are inherited
across exec. Some callers with sloppy signal-handling behavior can call
git with SIGPIPE blocked or ignored, even non-deterministically. When
SIGPIPE is blocked or ignored, several git commands can run indefinitely,
ignoring EPIPE returns from write() calls, even when the process that
called them has gone away. Our specific case involved a pipe of git
diff-tree output to a script that reads a limited amount of diff data.
In an ideal world, git would never be called with SIGPIPE blocked or
ignored. But in the real world, several real potential callers, including
Perl, Apache, and Unicorn, sometimes spawn subprocesses with SIGPIPE
ignored. It is easier and more productive to harden git against this
mistake than to clean it up in every potential parent process.
Signed-off-by: Patrick Reynolds <patrick.reynolds@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We actually want to have the size of one 'name' and not the size
of the pointer.
Signed-off-by: Stefan Beller <stefanbeller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we run `branch --merged`, we use prepare_revision_walk
with the merge-filter marked as UNINTERESTING. Any branch
tips that are marked UNINTERESTING after it returns must be
ancestors of that commit. As we iterate through the list of
refs to show, we check item->commit->object.flags to see
whether it was marked.
This interacts badly with --verbose, which will do a
separate walk to find the ahead/behind information for each
branch. There are two bad things that can happen:
1. The ahead/behind walk may get the wrong results,
because it can see a bogus UNINTERESTING flag leftover
from the merge-filter walk.
2. We may omit some branches if their tips are involved in
the ahead/behind traversal of a branch shown earlier.
The ahead/behind walk carefully cleans up its commit
flags, meaning it may also erase the UNINTERESTING
flag that we expect to check later.
We can solve this by moving the merge-filter state for each
ref into its "struct ref_item" as soon as we finish the
merge-filter walk. That fixes (2). Then we are free to clear
the commit flags we used in the walk, fixing (1).
Note that we actually do away with the matches_merge_filter
helper entirely here, and inline it between the revision
walk and the flag-clearing. This ensures that nobody
accidentally calls it at the wrong time (it is only safe to
check in that instant between the setting and clearing of
the global flag).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The macro ALLOC_GROW manages several aspects of dynamic memory
allocations for arrays: It performs overprovisioning in order to avoid
reallocations in future calls, updates the allocation size variable,
multiplies the item size and thus allows users to simply specify the
item count, performs the reallocation and updates the array pointer.
Sometimes this is too much. Add the macro REALLOC_ARRAY, which only
takes care of the latter three points and allows users to specfiy the
number of items the array can store. It can increase and also decrease
the size. Using the macro avoid duplicating the variable name and
takes care of the item sizes automatically.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When operating with the stateless RPC mode, we will receive a nonce
issued by another instance of us that advertised our capability and
refs some time ago. Update the logic to check received nonce to
detect this case, compute how much time has passed since the nonce
was issued and report the status with a new environment variable
GIT_PUSH_CERT_NONCE_SLOP to the hooks.
GIT_PUSH_CERT_NONCE_STATUS will report "SLOP" in such a case. The
hooks are free to decide how large a slop it is willing to accept.
Strictly speaking, the "nonce" is not really a "nonce" anymore in
the stateless RPC mode, as it will happily take any "nonce" issued
by it (which is protected by HMAC and its secret key) as long as it
is fresh enough. The degree of this security degradation, relative
to the native protocol, is about the same as the "we make sure that
the 'git push' decided to update our refs with new objects based on
the freshest observation of our refs by making sure the values they
claim the original value of the refs they ask us to update exactly
match the current state" security is loosened to accomodate the
stateless RPC mode in the existing code without this series, so
there is no need for those who are already using smart HTTP to push
to their repositories to be alarmed any more than they already are.
In addition, the server operator can set receive.certnonceslop
configuration variable to specify how stale a nonce can be (in
seconds). When this variable is set, and if the nonce received in
the certificate that passes the HMAC check was less than that many
seconds old, hooks are given "OK" in GIT_PUSH_CERT_NONCE_STATUS
(instead of "SLOP") and the received nonce value is given in
GIT_PUSH_CERT_NONCE, which makes it easier for a simple-minded
hook to check if the certificate we received is recent enough.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--signed" option received by "git push" is first passed to the
transport layer, which the native transport directly uses to notice
that a push certificate needs to be sent. When the transport-helper
is involved, however, the option needs to be told to the helper with
set_helper_option(), and the helper needs to take necessary action.
For the smart-HTTP helper, the "necessary action" involves spawning
the "git send-pack" subprocess with the "--signed" option.
Once the above all gets wired in, the smart-HTTP transport now can
use the push certificate mechanism to authenticate its pushes.
Add a test that is modeled after tests for the native transport in
t5534-push-signed.sh to t5541-http-push-smart.sh. Update the test
Apache configuration to pass GNUPGHOME environment variable through.
As PassEnv would trigger warnings for an environment variable that
is not set, export it from test-lib.sh set to a harmless value when
GnuPG is not being used in the tests.
Note that the added test is deliberately loose and does not check
the nonce in this step. This is because the stateless RPC mode is
inevitably flaky and a nonce that comes back in the actual push
processing is one issued by a different process; if the two
interactions with the server crossed a second boundary, the nonces
will not match and such a check will fail. A later patch in the
series will work around this shortcoming.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to prevent a valid push certificate for pushing into an
repository from getting replayed in a different push operation, send
a nonce string from the receive-pack process and have the signer
include it in the push certificate. The receiving end uses an HMAC
hash of the path to the repository it serves and the current time
stamp, hashed with a secret seed (the secret seed does not have to
be per-repository but can be defined in /etc/gitconfig) to generate
the nonce, in order to ensure that a random third party cannot forge
a nonce that looks like it originated from it.
The original nonce is exported as GIT_PUSH_CERT_NONCE for the hooks
to examine and match against the value on the "nonce" header in the
certificate to notice a replay, but returned "nonce" header in the
push certificate is examined by receive-pack and the result is
exported as GIT_PUSH_CERT_NONCE_STATUS, whose value would be "OK"
if the nonce recorded in the certificate matches what we expect, so
that the hooks can more easily check.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pre-receive and post-receive hooks were designed to be an
improvement over old style update and post-update hooks, which take
the update information on their command line and are limited by the
command line length limit. The same information is fed from the
standard input to pre/post-receive hooks instead to lift this
limitation. It has been mandatory for these new style hooks to
consume the update information fully from the standard input stream.
Otherwise, they would risk killing the receive-pack process via
SIGPIPE.
If a hook does not want to look at all the information, it is easy
to send its standard input to /dev/null (perhaps a niche use of hook
might need to know only the fact that a push was made, without
having to know what objects have been pushed to update which refs),
and this has already been done by existing hooks that are written
carefully.
However, because there is no good way to consistently fail hooks
that do not consume the input fully (a small push may result in a
short update record that may fit within the pipe buffer, to which
the receive-pack process may manage to write before the hook has a
chance to exit without reading anything, which will not result in a
death-by-SIGPIPE of receive-pack), it can lead to a hard to diagnose
"once in a blue moon" phantom failure.
Lift this "hooks must consume their input fully" mandate. A mandate
that is not enforced strictly is not helping us to catch mistakes in
hooks. If a hook has a good reason to decide the outcome of its
operation without reading the information we feed it, let it do so
as it pleases.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current syntax description makes one wonder if there is any
syntactic way to distinguish between <branch> and <upstream> so that
one can specify <branch> but not <upstream>, but that is not the
case.
Make it explicit that these arguments are positional, i.e. the
earlier ones cannot be omitted if you want to give later ones.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `test_must_be_be_empty <file>` instead of `test -z "$(cat <file>)"`.
Suggested-by: Fabian Ruch <bafain@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the stderr of "git credential-cache" is redirected to a
pipe, the reader on the other end of a pipe may be surprised
that the pipe remains open long after the process exits.
This happens because we may auto-spawn a daemon which is
long-lived, and which keeps stderr open.
We can solve this by redirecting the daemon's stderr to
/dev/null once we are ready to go into our event loop. We
would not want to do so before then, because we may want to
report errors about the setup (e.g., failure to establish
the listening socket).
This does mean that we will not report errors we encounter
for specific clients. That's acceptable, as such errors
should be rare (e.g., clients sending buggy requests).
However, we also provide an escape hatch: if you want to see
these later messages, you can provide the "--debug" option
to keep stderr open.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 81c5cf7 (mailinfo: skip bogus UNIX From line inside
body, 2006-05-21), we have treated lines like ">From" in the body as
headers. This makes "git am" work for people who erroneously paste
the whole output from format-patch:
From 12345abcd...fedcba543210 Mon Sep 17 00:00:00 2001
From: them
Subject: [PATCH] whatever
into their email body (assuming that an mbox writer then quotes
"From" as ">From", as otherwise we would actually mailsplit on the
in-body line).
However, this has false positives if somebody actually has a commit
body that starts with "From "; in this case we erroneously remove
the line entirely from the commit message. We can make this check
more robust by making sure the line actually looks like a real mbox
"From" line.
Inspect the line that begins with ">From " a more carefully to only
skip lines that match the expected pattern (note that the datestamp
part of the format-patch output is designed to be kept constant to
help those who write magic(5) entries).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Record the URL of the intended recipient for a push (after
anonymizing it if it has authentication material) on a new "pushee
URL" header. Because the networking configuration (SSH-tunnels,
proxies, etc.) on the pushing user's side varies, the receiving
repository may not know the single canonical URL all the pushing
users would refer it as (besides, many sites allow pushing over
ssh://host/path and https://host/path protocols to the same
repository but with different local part of the path). So this
value may not be reliably used for replay-attack prevention
purposes, but this will still serve as a human readable hint to
identify the repository the certificate refers to.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the interim protocol, we used to send the update commands even
though we already send a signed copy of the same information when
push certificate is in use. Update the send-pack/receive-pack pair
not to do so.
The notable thing on the receive-pack side is that it makes sure
that there is no command sent over the traditional protocol packet
outside the push certificate. Otherwise a pusher can claim to be
pushing one set of ref updates in the signed certificate while
issuing commands to update unrelated refs, and such an update will
evade later audits.
Finally, start documenting the protocol.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We would want to update the interim protocol so that we do not send
the usual update commands when the push certificate feature is in
use, as the same information is in the certificate. Once that
happens, the push-cert packet may become the only protocol command,
but then there is no packet to put the feature request behind, like
we always did.
As we have prepared the receiving end that understands the push-cert
feature to accept the feature request on the first protocol packet
(other than "shallow ", which was an unfortunate historical mistake
that has to come before everything else), we can give the feature
request on the push-cert packet instead of the first update protocol
packet, in preparation for the next step to actually update to the
final protocol.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reusing the GPG signature check helpers we already have, verify
the signature in receive-pack and give the results to the hooks
via GIT_PUSH_CERT_{SIGNER,KEY,STATUS} environment variables.
Policy decisions, such as accepting or rejecting a good signature by
a key that is not fully trusted, is left to the hook and kept
outside of the core.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While signed tags and commits assert that the objects thusly signed
came from you, who signed these objects, there is not a good way to
assert that you wanted to have a particular object at the tip of a
particular branch. My signing v2.0.1 tag only means I want to call
the version v2.0.1, and it does not mean I want to push it out to my
'master' branch---it is likely that I only want it in 'maint', so
the signature on the object alone is insufficient.
The only assurance to you that 'maint' points at what I wanted to
place there comes from your trust on the hosting site and my
authentication with it, which cannot easily audited later.
Introduce a mechanism that allows you to sign a "push certificate"
(for the lack of better name) every time you push, asserting that
what object you are pushing to update which ref that used to point
at what other object. Think of it as a cryptographic protection for
ref updates, similar to signed tags/commits but working on an
orthogonal axis.
The basic flow based on this mechanism goes like this:
1. You push out your work with "git push --signed".
2. The sending side learns where the remote refs are as usual,
together with what protocol extension the receiving end
supports. If the receiving end does not advertise the protocol
extension "push-cert", an attempt to "git push --signed" fails.
Otherwise, a text file, that looks like the following, is
prepared in core:
certificate version 0.1
pusher Junio C Hamano <gitster@pobox.com> 1315427886 -0700
7339ca65... 21580ecb... refs/heads/master
3793ac56... 12850bec... refs/heads/next
The file begins with a few header lines, which may grow as we
gain more experience. The 'pusher' header records the name of
the signer (the value of user.signingkey configuration variable,
falling back to GIT_COMMITTER_{NAME|EMAIL}) and the time of the
certificate generation. After the header, a blank line follows,
followed by a copy of the protocol message lines.
Each line shows the old and the new object name at the tip of
the ref this push tries to update, in the way identical to how
the underlying "git push" protocol exchange tells the ref
updates to the receiving end (by recording the "old" object
name, the push certificate also protects against replaying). It
is expected that new command packet types other than the
old-new-refname kind will be included in push certificate in the
same way as would appear in the plain vanilla command packets in
unsigned pushes.
The user then is asked to sign this push certificate using GPG,
formatted in a way similar to how signed tag objects are signed,
and the result is sent to the other side (i.e. receive-pack).
In the protocol exchange, this step comes immediately before the
sender tells what the result of the push should be, which in
turn comes before it sends the pack data.
3. When the receiving end sees a push certificate, the certificate
is written out as a blob. The pre-receive hook can learn about
the certificate by checking GIT_PUSH_CERT environment variable,
which, if present, tells the object name of this blob, and make
the decision to allow or reject this push. Additionally, the
post-receive hook can also look at the certificate, which may be
a good place to log all the received certificates for later
audits.
Because a push certificate carry the same information as the usual
command packets in the protocol exchange, we can omit the latter
when a push certificate is in use and reduce the protocol overhead.
This however is not included in this patch to make it easier to
review (in other words, the series at this step should never be
released without the remainder of the series, as it implements an
interim protocol that will be incompatible with the final one).
As such, the documentation update for the protocol is left out of
this step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Everywhere else we use PKT-LINE to denote the pkt-line formatted
data, but "shallow/deepen" messages are described with PKT_LINE().
Fix them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our signed-tag objects set the standard format used by Git to store
GPG-signed payload (i.e. the payload followed by its detached
signature) [*1*], and it made sense to have a helper to find the
boundary between the payload and its signature in tag.c back then.
Newer code added later to parse other kinds of objects that learned
to use the same format to store GPG-signed payload (e.g. signed
commits), however, kept using the helper from the same location.
Move it to gpg-interface; the helper is no longer about signed tag,
but it is how our code and data interact with GPG.
[Reference]
*1* http://thread.gmane.org/gmane.linux.kernel/297998/focus=1383
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, ffb6d7d5 (Move commit GPG signature verification to
commit.c, 2013-03-31) moved this helper that used to be in pretty.c
(i.e. the output code path) to commit.c for better reusability.
It was a good first step in the right direction, but still suffers
from a myopic view that commits will be the only thing we would ever
want to sign---we would actually want to be able to reuse it even
wider.
The function interprets what GPG said; gpg-interface is obviously a
better place. Move it there.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use it to make sure that the feature request is sent only once on
the very first request packet (ignoring the "shallow " line, which
was an unfortunate mistake we cannot retroactively fix with existing
receive-pack already deployed in the field) and we set it to "true"
with cmds_sent++, not because we care about the actual number of
updates sent but because it is merely an idiomatic way.
Set it explicitly to one to clarify that the code that uses this
variable only cares about its zero-ness.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main loop over remote_refs list inspects the ref status
to see if we need to generate pack data (i.e. a delete-only push
does not need to send any additional data), resets it to "expecting
the status report" state, and formats the actual update commands
to be sent.
Split the former two out of the main loop, as it will become
conditional in later steps.
Besides, we should have code that does real thing here, before the
"Finally, tell the other end!" part ;-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable counts how many non-deleting command is being sent, but
is only checked with 0-ness to decide if we need to send the pack
data.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the previous one for send-pack, make it easier and
cleaner to add to capability advertisement.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A run of 'var ? " var" : ""' fed to a long printf string in a deeply
nested block was hard to read. Move it outside the loop and format
it into a strbuf.
As an added bonus, the trick to add "agent=<agent-name>" by using
two conditionals is replaced by a more readable version.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We tried to avoid sending one extra byte, NUL and nothing behind it
to signal there is no protocol capabilities being sent, on the first
command packet on the wire, but it just made the code look ugly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new helper function ref_update_to_be_sent() decides for each ref
if the update is to be sent based on the status previously set by
set_ref_status_for_push() and also if this is a mirrored push.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
20e8b465 (refactor ref status logic for pushing, 2010-01-08)
restructured the code to set status for each ref to be pushed, but
did not quite go far enough. We inspect the status set earlier by
set_refs_status_for_push() and then perform yet another update to
the status of a ref with an otherwise OK status to be deleted to
mark it with REF_STATUS_REJECT_NODELETE when the protocol tells us
never to delete.
Split the latter into a separate loop that comes before we enter the
per-ref loop. This way we would have one less condition to check in
the main loop.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make a helper function to accept a line of a protocol message and
queue an update command out of the code from read_head_info().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This piece of code reads object names of shallow boundaries, not
old_sha1[], i.e. the current value the ref points at, which is to be
replaced by what is in new_sha1[].
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ideally, we should have also allowed the first "shallow" to carry
the feature request trailer, but that is water under the bridge
now. This makes the next step to factor out the queuing of commands
easier to review.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An "update" command in the protocol exchange consists of 40-hex old
object name, SP, 40-hex new object name, SP, and a refname, but the
first instance is further followed by a NUL with feature requests.
The command structure, which has a flex-array member that stores the
refname at the end, was allocated based on the whole length of the
update command, without excluding the trailing feature requests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CodingGuidelines states that the first #include in C files should be
git-compat-util.h or another header file that includes it, such as
cache.h or builtin.h.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
glibc has deprecated the use of _BSD_SOURCE define
warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE"
To make it easier to maintain a cross platform source code, that
warning can be suppressed by _DEFAULT_SOURCE.
Define both _BSD_SOURCE and _DEFAULT_SOURCE to clean-up the build.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call the functions behind git prune-packed and git update-server-info
directly instead of using run_command(). This is shorter, easier and
quicker.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We allocate pack information in a static global list but
never clean it up. This leaks memory, and means that calling
update_server_info twice will generate a buggy file (it will
have duplicate entries).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since "git update-server-info" may be called automatically
as part of a push or a "gc --auto", we should be robust
against two processes trying to update it simultaneously.
However, we currently use a fixed tempfile, which means that
two simultaneous writers may step on each other's toes and
end up renaming junk into place.
Let's instead switch to using a unique tempfile via mkstemp.
We do not want to use a lockfile here, because it's OK for
two writers to simultaneously update (one will "win" the
rename race, but that's OK; they should be writing the same
information).
While we're there, let's clean up a few other things:
1. Detect write errors. Report them and abort the update
if any are found.
2. Free path memory rather than leaking it (and clean up
the tempfile when necessary).
3. Use the pathdup functions consistently rather than
static buffers or manually calculated lengths.
This last one fixes a potential overflow of "infofile" in
update_info_packs (e.g., by putting large junk into
$GIT_OBJECT_DIRECTORY). However, this overflow was probably
not an interesting attack vector for two reasons:
a. The attacker would need to control the environment to
do this, in which case it was already game-over.
b. During its setup phase, git checks that the directory
actually exists, which means it is probably shorter
than PATH_MAX anyway.
Because both update_info_refs and update_info_packs share
these same failings (and largely duplicate each other), this
patch factors out the improved error-checking version into a
helper function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We form all of our directories in a strbuf, but never release it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On my Debian 7 system, this fixes annoying warnings when the output
of "git svn" commands are redirected:
Unable to get Terminal Size. The TIOCGWINSZ ioctl didn't work.
The COLUMNS and LINES environment variables didn't work. The
resize program didn't work.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Allow -B and -A to act as short aliases for --before and --after
options respectively. This reduces typing and hopefully allows
reuse of muscle memory for grep(1) users.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Git no longer seems to use these flags or their associated config keys;
when they are present, git-svn outputs a message indicating that they
are being ignored.
Signed-off-by: Lawrence Velázquez <vq@larryv.me>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Calling "git svn info $(pwd)" would hit:
"Reading from filehandle failed at ..."
errors due to improper prefixing and canonicalization.
Strip the toplevel path from absolute filesystem paths to ensure
downstream canonicalization routines are only exposed to paths
tracked in git (or SVN).
v2:
Thanks to Andrej Manduch for originally noticing the issue
and fixing my original version of this to handle
more corner cases such as "/path/to/top/../top" and
"/path/to/top/../top/file" as shown in the new test cases.
v3:
Fix pathname portability problems pointed out by Johannes Sixt
with a hint from brian m. carlson.
Cc: Johannes Sixt <j6t@kdbg.org>
Cc: "brian m. carlson" <sandals@crustytoothpaste.net>
Signed-off-by: Andrej Manduch <amanduch@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Commands such as "git svn init/fetch/dcommit" do not prompt for client
certificate/password if they are stored in SVN config file. Make
"git svn branch" consistent with the other commands, as SVN::Client is
capable of building its own authentication baton from information in the
SVN config directory.
Signed-off-by: Monard Vong <travelingsoul86@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
test_cmp is intended to produce diff output for human consumption. The
input in one instance in t9300-fast-import.sh are binary files, however.
Use test_cmp_bin to compare the files.
This was noticed because on Windows we have a special implementation of
test_cmp in pure bash code (to ignore differences due to intermittent CR
in actual output), and bash runs into an infinite loop due to the binary
nature of the input.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our filesystem ref storage does not allow D/F conflicts; so
if "refs/heads/a/b" exists, we do not allow "refs/heads/a"
to exist (and vice versa). This falls out naturally for
loose refs, where the filesystem enforces the condition. But
for packed-refs, we have to make the check ourselves.
We do so by iterating over the entire packed-refs namespace
and checking whether each name creates a conflict. If you
have a very large number of refs, this is quite inefficient,
as you end up doing a large number of comparisons with
uninteresting bits of the ref tree (e.g., we know that all
of "refs/tags" is uninteresting in the example above, yet we
check each entry in it).
Instead, let's take advantage of the fact that we have the
packed refs stored as a trie of ref_entry structs. We can
find each component of the proposed refname as we walk
through the trie, checking for D/F conflicts as we go. For a
refname of depth N (i.e., 4 in the above example), we only
have to visit N nodes. And at each visit, we can binary
search the M names at that level, for a total complexity of
O(N lg M). ("M" is different at each level, of course, but
we can take the worst-case "M" as a bound).
In a pathological case of fetching 30,000 fresh refs into a
repository with 8.5 million refs, this dropped the time to
run "git fetch" from tens of minutes to ~30s.
This may also help smaller cases in which we check against
loose refs (which we do when renaming a ref), as we may
avoid a disk access for unrelated loose directories.
Note that the tests we add appear at first glance to be
redundant with what is already in t3210. However, the early
tests are not robust; they are run with reflogs turned on,
meaning that we are not actually testing
is_refname_available at all! The operations will still fail
because the reflogs will hit D/F conflicts in the
filesystem. To get a true test, we must turn off reflogs
(but we don't want to do so for the entire script, because
the point of turning them on was to cover some other cases).
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With "hash-object --literally", write a tag object that is not
supposed to pass one of the new checks added to "fsck", and make
sure that the new check catches the breakage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/fsck-tag-validation:
Make sure that index-pack --strict checks tag objects
Add regression tests for stricter tag fsck'ing
fsck: check tag objects' headers
Make sure fsck_commit_buffer() does not run out of the buffer
fsck_object(): allow passing object data separately from the object itself
Refactor type_from_string() to allow continuing after detecting an error
One of the most important use cases for the strict tag object checking
is when transfer.fsckobjects is set to true to catch invalid objects
early on. This new regression test essentially tests the same code path
by directly calling 'index-pack --strict' on a pack containing an
tag object without a 'tagger' line.
Technically, this test is not enough: it only exercises a code path that
*warns*, not one that *fails*. The reason is that hash-object and
pack-objects both insist on parsing the tag objects and would fail on
invalid tag objects at this time.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fsck tries hard to detect missing objects, and will complain
(and exit non-zero) about any inter-object links that are
missing. However, it will not exit non-zero for any missing
ref tips, meaning that a severely broken repository may
still pass "git fsck && echo ok".
The problem is that we use for_each_ref to iterate over the
ref tips, which hides broken tips. It does at least print an
error from the refs.c code, but fsck does not ever see the
ref and cannot note the problem in its exit code. We can solve
this by using for_each_rawref and noting the error ourselves.
In addition to adding tests for this case, we add tests for
all types of missing-object links (all of which worked, but
which we were not testing).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce CONFIG_REGEX_NONE as a more explicit sentinel value to say
"we do not want to replace any existing entry" and use it in the
implementation of "git config --add".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
githooks(5) suggests:
Information about why the push is rejected may be sent to the user
by writing to standard error.
So follow that advice in the sample.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows "hash-object --stdin" to just hash any garbage into a
"loose object" that may not pass the standard object parsing check
or fsck, so that different kind of corrupt objects we may encounter
in the field can be imitated in our test suite. That would in turn
allow us to test features that catch these corrupt objects.
Note that "cat-file" may need to learn "--literally" option to allow
us peek into a truly broken object.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The intent of the new test case is to catch general breakages in
the fsck_tag() function, not so much to test it extensively, trying to
strike the proper balance between thoroughness and speed.
While it *would* have been nice to test the code path where fsck_object()
encounters an invalid tag object, this is not possible using git fsck: tag
objects are parsed already before fsck'ing (and the parser already fails
upon such objects).
Even worse: we would not even be able write out invalid tag objects
because git hash-object parses those objects, too, unless we resorted to
really ugly hacks such as using something like this in the unit tests
(essentially depending on Perl *and* Compress::Zlib):
hash_invalid_object () {
contents="$(printf '%s %d\0%s' "$1" ${#2} "$2")" &&
sha1=$(echo "$contents" | test-sha1) &&
suffix=${sha1#??} &&
mkdir -p .git/objects/${sha1%$suffix} &&
echo "$contents" |
perl -MCompress::Zlib -e 'undef $/; print compress(<>)' \
> .git/objects/${sha1%$suffix}/$suffix &&
echo $sha1
}
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of forcing callers of lower level functions write
(write_object ? HASH_WRITE_OBJECT : 0), prepare the flag to be
passed down in the callchain from the command line parser.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the knobs that affect helper functions called from
cmd_hash_object() were passed to them as parameters already, and the
only effect of having them as file-scope statics was to make the
reader wonder if the parameters are hiding the file-scope global
values by accident. Adjust their initialisation and make them
function-local variables.
The only exception was no_filters hash_stdin_paths() peeked from the
file-scope global, which was converted to a parameter to the helper
function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We inspect commit objects pretty much in detail in git-fsck, but we just
glanced over the tag objects. Let's be stricter.
Since we do not want to limit 'tag' lines unduly, values that would fail
the refname check only result in warnings, not errors.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far, we assumed that the buffer is NUL terminated, but this is not
a safe assumption, now that we opened the fsck_object() API to pass a
buffer directly.
So let's make sure that there is at least an empty line in the buffer.
That way, our checks would fail if the empty line was encountered
prematurely, and consequently we can get away with the current string
comparisons even with non-NUL-terminated buffers are passed to
fsck_object().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The single-parameter form is described as the preferred way. Separate
arguments are only supported for backward compatibility. Update the
example to the recommended form.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The API to allocate the structure to keep track of commit
decoration was cumbersome to use, inviting lazy code to
overallocate memory.
* jk/name-decoration-alloc:
log-tree: use FLEX_ARRAY in name_decoration
log-tree: make name_decoration hash static
log-tree: make add_name_decoration a public function
"git checkout -m" did not switch to another branch while carrying
the local changes forward when a path was deleted from the index.
* jn/unpack-trees-checkout-m-carry-deletion:
checkout -m: attempt merge when deletion of path was staged
unpack-trees: use 'cuddled' style for if-else cascade
unpack-trees: simplify 'all other failures' case
Fix a couple of "accumulate into a sorted list" to "accumulate and
then sort the list".
* rs/list-optim:
walker: avoid quadratic list insertion in mark_complete
sha1_name: avoid quadratic list insertion in handle_one_ref
With sufficiently long refnames, fast-import could have overflown
an on-stack buffer.
* jk/fast-import-fixes:
fast-import: fix buffer overflow in dump_tags
fast-import: clean up pack_data pointer in end_packfile
After "pack-refs --prune" packed refs at the top-level, it failed
to prune them.
* jk/prune-top-level-refs-after-packing:
pack-refs: prune top-level refs like "refs/foo"
Teach a few codepaths to punt (instead of dying) when large blobs
that would not fit in core are involved in the operation.
* nd/large-blobs:
diff: shortcut for diff'ing two binary SHA-1 objects
diff --stat: mark any file larger than core.bigfilethreshold binary
diff.c: allow to pass more flags to diff_populate_filespec
sha1_file.c: do not die failing to malloc in unpack_compressed_entry
wrapper.c: introduce gentle xmallocz that does not die()
Progress output from "git gc --auto" was visible in "git fetch -q".
* nd/fetch-pass-quiet-to-gc-child-process:
fetch: silence git-gc if --quiet is given
fetch: convert argv_gc_auto to struct argv_array
Add a few more places in "commit" and "checkout" that make sure
that the cache-tree is fully populated in the index.
* dt/cache-tree-repair:
cache-tree: do not try to use an invalidated subtree info to build a tree
cache-tree: Write updated cache-tree after commit
cache-tree: subdirectory tests
test-dump-cache-tree: invalid trees are not errors
cache-tree: create/update cache-tree on checkout
The second batch of the transactional ref update series.
* rs/ref-transaction-1: (22 commits)
update-ref --stdin: pass transaction around explicitly
update-ref --stdin: narrow scope of err strbuf
refs.c: make delete_ref use a transaction
refs.c: make prune_ref use a transaction to delete the ref
refs.c: remove lock_ref_sha1
refs.c: remove the update_ref_write function
refs.c: remove the update_ref_lock function
refs.c: make lock_ref_sha1 static
walker.c: use ref transaction for ref updates
fast-import.c: use a ref transaction when dumping tags
receive-pack.c: use a reference transaction for updating the refs
refs.c: change update_ref to use a transaction
branch.c: use ref transaction for all ref updates
fast-import.c: change update_branch to use ref transactions
sequencer.c: use ref transactions for all ref updates
commit.c: use ref transactions for updates
replace.c: use the ref transaction functions for updates
tag.c: use ref transactions when doing updates
refs.c: add transaction.status and track OPEN/CLOSED
refs.c: make ref_transaction_begin take an err argument
...
Code clean-up.
* nd/mv-code-cleaning:
mv: no SP between function name and the first opening parenthese
mv: combine two if(s)
mv: unindent one level for directory move code
mv: move index search code out
mv: remove an "if" that's always true
mv: split submodule move preparation code out
mv: flatten error handling code block
mv: mark strings for translations
Admit that keeping LIB_H up-to-date, only for those that do not use
the automatically generated dependencies, is a losing battle, and
make it conservative by making everything depend on anything.
* jk/make-simplify-dependencies:
Makefile: drop CHECK_HEADER_DEPENDENCIES code
Makefile: use `find` to determine static header dependencies
i18n: treat "make pot" as an explicitly-invoked target
We used to pass -1000 to poll(2), expecting it to also mean "no
timeout", which should be spelled as -1.
* et/spell-poll-infinite-with-minus-one-only:
upload-pack: keep poll(2)'s timeout to -1
Update git_config() users with callback functions for a very narrow
scope with calls to config-set API that lets us query a single
variable.
* ta/config-set-2:
builtin/apply.c: replace `git_config()` with `git_config_get_string_const()`
merge-recursive.c: replace `git_config()` with `git_config_get_int()`
ll-merge.c: refactor `read_merge_config()` to use `git_config_string()`
fast-import.c: replace `git_config()` with `git_config_get_*()` family
branch.c: replace `git_config()` with `git_config_get_string()
alias.c: replace `git_config()` with `git_config_get_string()`
imap-send.c: replace `git_config()` with `git_config_get_*()` family
pager.c: replace `git_config()` with `git_config_get_value()`
builtin/gc.c: replace `git_config()` with `git_config_get_*()` family
rerere.c: replace `git_config()` with `git_config_get_*()` family
fetchpack.c: replace `git_config()` with `git_config_get_*()` family
archive.c: replace `git_config()` with `git_config_get_bool()` family
read-cache.c: replace `git_config()` with `git_config_get_*()` family
http-backend.c: replace `git_config()` with `git_config_get_bool()` family
daemon.c: replace `git_config()` with `git_config_get_bool()` family
Use the new caching config-set API in git_config() calls.
* ta/config-set-1:
add tests for `git_config_get_string_const()`
add a test for semantic errors in config files
rewrite git_config() to use the config-set API
config: add `git_die_config()` to the config-set API
change `git_config()` return value to void
add line number and file name info to `config_set`
config.c: fix accuracy of line number in errors
config.c: mark error and warnings strings for translation
When fsck'ing an incoming pack, we need to fsck objects that cannot be
read via read_sha1_file() because they are not local yet (and might even
be rejected if transfer.fsckobjects is set to 'true').
For commits, there is a hack in place: we basically cache commit
objects' buffers anyway, but the same is not true, say, for tag objects.
By refactoring fsck_object() to take the object buffer and size as
optional arguments -- optional, because we still fall back to the
previous method to look at the cached commit objects if the caller
passes NULL -- we prepare the machinery for the upcoming handling of tag
objects.
The assumption that such buffers are inherently NUL terminated is now
wrong, of course, hence we pass the size of the buffer so that we can
add a sanity check later, to prevent running past the end of the buffer.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next commits, we will enhance the fsck_tag() function to check
tag objects more thoroughly. To this end, we need a function to verify
that a given string is a valid object type, but that does not die() in
the negative case.
While at it, prepare type_from_string() for counted strings, i.e. strings
with an explicitly specified length rather than a NUL termination.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We write each line of a new packed-refs file individually
using a write() syscall (and sometimes 2, if the ref is
peeled). Since each line is only about 50-100 bytes long,
this creates a lot of system call overhead.
We can instead open a stdio handle around our descriptor and
use fprintf to write to it. The extra buffering is not a
problem for us, because nobody will read our new packed-refs
file until we call commit_lock_file (by which point we have
flushed everything).
On a pathological repository with 8.5 million refs, this
dropped the time to run `git pack-refs` from 20s to 6s.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Upon finding a corrupt loose object, we forgot to note the error to
signal it with the exit status of the entire process.
[jc: adjusted t1450 and added another test]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prompt script checked $GIT_DIR/ref/stash file to see if there
is a stash, which was a no-no.
* jk/prompt-stash-could-be-packed:
git-prompt: do not look for refs/stash in $GIT_DIR
* jc/config-mak-document-darwin-vs-macosx:
config.mak.uname: add hint on uname_R for MacOS X
config.mak.uname: set NO_APPLE_COMMON_CRYPTO on older systems
May need further updates to the description to explain what makes
various modes of operation to decide that the request can become a
"no-op".
* so/rebase-doc:
Documentation/git-rebase.txt: -f forces a rebase that would otherwise be a no-op
"git add x" where x that used to be a directory has become a
symbolic link to a directory misbehaved.
* rs/refresh-beyond-symlink:
read-cache: check for leading symlinks when refreshing index
Teach "git stash list -p" to show the difference between the base
commit version and the working tree version, which is in line with
what "git show" gives.
* jk/stash-list-p:
stash: default listing to working-tree diff
"git bundle create" with date-range specification were meant to
exclude tags outside the range
* lf/bundle-exclusion:
bundle: fix exclusion of annotated tags
Applying a patch not generated by Git in a subdirectory used to
check the whitespace breakage using the attributes for incorrect
paths. Also whitespace checks were performed even for paths
excluded via "git apply --exclude=<path>" mechanism.
* jc/apply-ws-prefix:
apply: omit ws check for excluded paths
apply: hoist use_patch() helper for path exclusion up
apply: use the right attribute for paths in non-Git patches
"git -c section.var command" and "git -c section.var= command"
should pass the configuration differently (the former should be
a boolean true, the latter should be an empty string).
* jk/command-line-config-empty-string:
config: teach "git -c" to recognize an empty string
We have been using NOT_{MINGW,CYGWIN} test prerequisites long
before Peff invented support for negated prerequisites e.g. !MINGW
and we still add more uses of the former. Convert them to the
latter to avoid confusion.
* jc/not-mingw-cygwin:
test prerequisites: enumerate with commas
test prerequisites: eradicate NOT_FOO
Move strbuf_addchars() to strbuf.c, where it belongs, and make it
available for other callers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is easy to overlook an already assigned single-letter option name
and try to use it for a new one. Help the developer to catch it
before such a mistake escapes the lab.
This retroactively forbids any short option name (which is defined
to be of type "int") outside the ASCII printable range. We might
want to do one of two things:
- tighten the type of short_name member to 'char', and further
update optbug() to protect it against doing "'%c'" on a funny
value, e.g. negative or above 127.
- drop the check (even the "duplicate" check) for an option whose
short_name is either negative or above 255, to allow clever folks
to take advantage of the fact that such a short_name cannot be
parsed from the command line and the member can be used to store
some extra information.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is inside an "else" block of "if (last - first < 1)", so we know
that "last - first >= 1" when we come here. No need to check
"last - first > 0".
While at there, save "argc + last - first" to a variable to shorten
the statements a bit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a handful more instances of this in compat/regex/ but they
are borrowed code taht we do not want to touch with a change that
really affects correctness, which this change is not.
Signed-off-by: Arjun Sreedharan <arjun024@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HEAD is not explicitly used as a starting commit for
calculating reachability, so if it's detached and reflogs
are disabled it may be pruned.
Add tests which demonstrate it. Test 'prune: prune former HEAD after checking
out branch' also reverts changes to repository.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We punt from repairing the cache-tree during a branch switching if
it involves having to create a new tree object that does not yet
exist in the object store. "mkdir dir && >dir/file && git add dir"
followed by "git checkout" is one example, when a tree that records
the state of such "dir/" is not in the object store.
However, after discovering that we do not have a tree object that
records the state of "dir/", the caller failed to remember the fact
that it noticed the cache-tree entry it received for "dir/" is
invalidated, it already knows it should not be populating the level
that has "dir/" as its immediate subdirectory, and it is not an
error at all for the sublevel cache-tree entry gave it a bogus
object name it shouldn't even look at.
This led the caller to detect and report a non-existent error. The
end result was the same and we avoided stuffing a non-existent tree
to the cache-tree, but we shouldn't have issued an alarming error
message to the user.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it more obvious at a glance where the output of functions
parsing the --stdin stream goes.
No functional change intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Making the strbuf local in each function that needs to print errors
saves the reader from having to think about action at a distance,
such as
* errors piling up and being concatenated with no newline between
them
* errors unhandled in one function, to be later handled in another
* concurrency issues, if this code starts using threads some day
No functional change intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change delete_ref to use a ref transaction for the deletion. At the same time
since we no longer have any callers of repack_without_ref we can now delete
this function.
Change delete_ref to return 0 on success and 1 on failure instead of the
previous 0 on success either 1 or -1 on failure.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change prune_ref to delete the ref using a ref transaction. To do this we also
need to add a new flag REF_ISPRUNING that will tell the transaction that we
do not want to delete this ref from the packed refs. This flag is private to
refs.c and not exposed to external callers.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
lock_ref_sha1 was only called from one place in refs.c and only provided
a check that the refname was sane before adding back the initial "refs/"
part of the ref path name, the initial "refs/" that this caller had already
stripped off before calling lock_ref_sha1.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we only call update_ref_write from a single place and we only call it
with onerr==QUIET_ON_ERR we can just as well get rid of it and just call
write_ref_sha1 directly. This changes the return status for _commit from
1 to -1 on failures when writing to the ref. Eventually we will want
_commit to start returning more detailed error conditions than the current
simple success/failure.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we now only call update_ref_lock with onerr==QUIET_ON_ERR we no longer
need this function and can replace it with just calling lock_any_ref_for_update
directly.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch to using ref transactions in walker_fetch(). As part of the refactoring
to use ref transactions we also fix a potential memory leak where in the
original code if write_ref_sha1() would fail we would end up returning from
the function without free()ing the msg string.
Note that this function is only called when fetching from a remote HTTP
repository onto the local (most of the time single-user) repository which
likely means that the type of collisions that the previous locking would
protect against and cause the fetch to fail for are even more rare.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap all the ref updates inside a transaction.
In the new API there is no distinction between failure to lock and
failure to write a ref. Both can be permanent (e.g., a ref
"refs/heads/topic" is blocking creation of the lock file
"refs/heads/topic/1.lock") or transient (e.g., file system full) and
there's no clear difference in how the client should respond, so
replace the two statuses "failed to lock" and "failed to write" with
a single status "failed to update ref". In both cases a more
detailed message is sent by sideband to diagnose the problem.
Example, before:
error: there are still refs under 'refs/heads/topic'
remote: error: failed to lock refs/heads/topic
To foo
! [remote rejected] HEAD -> topic (failed to lock)
After:
error: there are still refs under 'refs/heads/topic'
remote: error: Cannot lock the ref 'refs/heads/topic'.
To foo
! [remote rejected] HEAD -> topic (failed to update ref)
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change create_branch to use a ref transaction when creating the new branch.
This also fixes a race condition in the old code where two concurrent
create_branch could race since the lock_any_ref_for_update/write_ref_sha1
did not protect against the ref already existing. I.e. one thread could end up
overwriting a branch even if the forcing flag is false.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change commit.c to use ref transactions for all ref updates.
Make sure we pass a NULL pointer to ref_transaction_update if have_old
is false.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Track the state of a transaction in a new state field. Check the field for
sanity, i.e. that state must be OPEN when _commit/_create/_delete or
_update is called or else die(BUG:...)
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an err argument to _begin so that on non-fatal failures in future ref
backends we can report a nice error back to the caller.
While _begin can currently never fail for other reasons than OOM, in which
case we die() anyway, we may add other types of backends in the future.
For example, a hypothetical MySQL backend could fail in _begin with
"Can not connect to MySQL server. No route to host".
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change ref_transaction_delete() to do basic error checking and return
non-zero on error. Update all callers to check the return for
ref_transaction_delete(). There are currently no conditions in _delete that
will return error but there will be in the future. Add an err argument that
will be updated on failure.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do basic error checking in ref_transaction_create() and make it return
non-zero on error. Update all callers to check the result of
ref_transaction_create(). There are currently no conditions in _create that
will return error but there will be in the future. Add an err argument that
will be updated on failure.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce the use of fixed sized buffer passed to getcwd() calls
by introducing xgetcwd() helper.
* rs/strbuf-getcwd:
use strbuf_add_absolute_path() to add absolute paths
abspath: convert absolute_path() to strbuf
use xgetcwd() to set $GIT_DIR
use xgetcwd() to get the current directory or die
wrapper: add xgetcwd()
abspath: convert real_path_internal() to strbuf
abspath: use strbuf_getcwd() to remember original working directory
setup: convert setup_git_directory_gently_1 et al. to strbuf
unix-sockets: use strbuf_getcwd()
strbuf: add strbuf_getcwd()
Implementations of "tar" that do not understand an extended pax
header would extract the contents of it in a regular file; make
sure the permission bits of this file follows the same tar.umask
configuration setting.
* bc/archive-pax-header-mode:
archive: honor tar.umask even for pax headers
"git log --pretty/format=" with an empty format string did not mean
the more obvious "No output whatsoever" but "Use default format",
which was counterintuitive.
* jk/pretty-empty-format:
pretty: make empty userformats truly empty
pretty: treat "--format=" as an empty userformat
revision: drop useless string offset when parsing "--pretty"
Add in-core caching layer to let us avoid reading the same
configuration files number of times.
* ta/config-set:
test-config: add tests for the config_set API
add `config_set` API for caching config-like files
Start "git config --edit --global" from a skeletal per-user
configuration file contents, instead of a total blank, when the
user does not already have any. This immediately reduces the need
for a later "Have you forgotten setting core.user?" and we can add
more to the template as we gain more experience.
* mm/config-edit-global:
commit: advertise config --global --edit on guessed identity
home_config_paths(): let the caller ignore xdg path
config --global --edit: create a template file if needed
There are cases where you lock and open to write a file, close it to
show the updated contents to external processes, and then have to
update the file again while still holding the lock, but the lockfile
API lacked support for such an access pattern.
* jc/reopen-lock-file:
lockfile: allow reopening a closed but still locked file
Use starts_with() instead of memcmp() to check if NUL-terminated
strings match prefixes. This gets rid of some magic string length
constants.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the tests were written with the assumption that the native
eol would always be lf. After defining NATIVE_CRLF on MinGW, these
tests began failing. This change will update the tests to also
handle a native eol of crlf.
Signed-off-by: Brice Lambson <bricelam@live.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 95f31e9a (convert: The native line-ending is \r\n on MinGW,
2010-09-04) correctly points out that the NATIVE_CRLF setting is
incorrectly set on Mingw git. However, the Makefile variable is not
propagated to the C preprocessor and results in no change. This patch
pushes the definition to the C code and adds a test to validate that
when core.eol as native is crlf, we actually normalize text files to
this line ending convention when core.autocrlf is false.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge_trees_recursive() stores a pointer to its parameter df_conflict in
its struct traverse_info, but it is never actually used. Stop doing
that, remove the parameter and inline the function into merge_trees(),
as the latter is now only passing on its parameters.
Remove the parameter df_conflict from unresolved_directory() as well,
now that there is no way to pass it to merge_trees_recursive() through
that function anymore.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use strbuf to build the new base, which takes care of allocations and
the terminating NUL character automatically.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using skip_prefix() to check the first part of the string
and then strcmp() to check the rest, simply use strcmp() to check the
whole string.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Get rid of magic string length constants by using skip_prefix() instead
of memcmp() and use xstrfmt() for building a string instead of a
PATH_MAX-sized buffer, snprintf() and xstrdup().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both callers of check_ref() pass in NUL-terminated strings for name.
Remove the len parameter and then use skip_prefix() and starts_with()
instead of memcmp() to check if it starts with certain strings. This
gets rid of several magic string length constants and a strlen() call.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are resolving deltas in an indexed pack, we do it by
first selecting a potential base (either one stored in full
in the pack, or one created by resolving another delta), and
then resolving any deltas that use that base. When we
resolve a particular delta, we flip its "real_type" field
from OBJ_{REF,OFS}_DELTA to whatever the real type is.
We assume that traversing the objects this way will visit
each delta only once. This is correct for most packs; we
visit the delta only when we process its base, and each
object (and thus each base) appears only once. However, if a
base object appears multiple times in the pack, we will try
to resolve any deltas based on it once for each instance.
We can detect this case by noting that a delta we are about
to resolve has already had its real_type field flipped, and
we already do so with an assert(). However, if multiple
threads are in use, we may race with another thread on
comparing and flipping the field. We need to synchronize the
access.
The right mechanism for doing this is a compare-and-swap (we
atomically "claim" the delta for our own and find out
whether our claim was successful). We can implement this
in C by using a pthread mutex to protect the operation. This
is not the fastest way of doing a compare-and-swap; many
processors provide instructions for this, and gcc and other
compilers provide builtins to access them. However, some
experiments showed that lock contention does not cause a
significant slowdown here. Adding c-a-s support for many
compilers would increase the maintenance burden (and we
would still end up including the pthread version as a
fallback).
Note that we only need to touch the OBJ_REF_DELTA codepath
here. An OBJ_OFS_DELTA object points to its base using an
offset, and therefore has only one base, even if another
copy of that base object appears in the pack (we do still
touch it briefly because the setting of real_type is
factored out of resolve_data).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's "ISO" date format does not really conform to the ISO 8601
standard due to small differences, and it cannot be parsed by ISO
8601-only parsers, e.g. those of XML toolchains.
The output from "--date=iso" deviates from ISO 8601 in these ways:
- a space instead of the `T` date/time delimiter
- a space between time and time zone
- no colon between hours and minutes of the time zone
Add a strict ISO 8601 date format for displaying committer and
author dates. Use the '%aI' and '%cI' format specifiers and add
'--date=iso-strict' or '--date=iso8601-strict' date format names.
See http://thread.gmane.org/gmane.comp.version-control.git/255879 and
http://thread.gmane.org/gmane.comp.version-control.git/52414/focus=52585
for discussion.
Signed-off-by: Beat Bolli <bbolli@ewanet.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Makefile has provisions for this case, so let's detect it in the
configure script as well.
Signed-off-by: Jonas 'Sortie' Termansen <sortie@maxsi.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Makefile has provisions for this case, so let's detect it in the
configure script as well.
Signed-off-by: Jonas 'Sortie' Termansen <sortie@maxsi.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This hasn't been a problem in practice as almost all systems have the
setitimer() API (or it is provided by git in the case of mingw). This code
wasn't used in any default circumstances, as the build system never sets
NO_STRUCT_ITIMERVAL - this breakage only occured if the user asked for it.
We repair this case so we can rely on it in the following commits.
Signed-off-by: Jonas 'Sortie' Termansen <sortie@maxsi.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When figuring out the author name for a commit, we may end
up either pointing to const storage from getenv("GIT_AUTHOR_*"),
or to newly allocated storage based on an existing commit or
the --author option.
Using const pointers to getenv's return has two problems:
1. It is not guaranteed that the return value from getenv
remains valid across multiple calls.
2. We do not know whether to free the values at the end,
so we just leak them.
We can solve both by duplicating the string returned by
getenv().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than parsing the header manually to find the "author"
field, and then parsing its sub-parts, let's use
find_commit_header and split_ident_line. This is shorter and
easier to read, and should do a more careful parsing job.
For example, the current parser could find the end-of-email
right-bracket across a newline (for a malformed commit), and
calculate a bogus gigantic length for the date (by using
"eol - rb").
As a bonus, this also plugs a memory leak when we pull the
date field from an existing commit (we still leak the name
and email buffers, which will be fixed in a later commit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Branch tree is NULLified by filedelete command if we are trying
to delete root tree. Add sanity check and use load_tree() in that case.
Signed-off-by: Maxim Bublis <satori@yandex-team.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new fast-import test series for filedelete command.
Signed-off-by: Maxim Bublis <satori@yandex-team.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes several problems:
* include config.mak.uname, config.mak.autogen and config.mak
in order to use settings for prefix and other such things;
* link xdiff/lib.a as it is a requirement for libgit.a;
* fix CFLAGS, LDFLAGS and EXTLIBS for Linux and Mac OS X.
Signed-off-by: Maxim Bublis <satori@yandex-team.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation sends an LF, but the protocol documentation was
missing this detail.
Signed-off-by: Shawn Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test cases for core.eol "native" and "" (unset).
(MINGW uses CRLF, all other systems LF as native line endings)
Add test cases for the attributes "eol=lf" and "eol=crlf"
Other minor changes:
- Use the more portable 'tr' instead of 'od -c' to convert '\n' into 'Q'
and '\0' into 'N'
- Style fixes for shell functions according to the coding guide lines
- Replace "txtbin" with "attr"
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original commit made mention of this option, but not why
one might want it or how they might use it. Let's try to be
a little more thorough, and also explain how to confirm that
the output really is anonymous.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git commit -a' is rarely a good way to mark conflicts as resolved:
the user anyway has to go manually through the list of conflicts to
do the actual resolution, and it is usually better to use "git add"
on each files after doing the resolution.
On the other hand, using 'git commit -a' is potentially dangerous,
as it makes it very easy to mistakenly commit conflict markers
without noticing, and even worse, the user may have started a merge
while having local changes that do not overlap with it in the
working tree.
While we're there, synchronize the 'git pull' and 'git merge'
messages: the first was ending with '... and make a commit.', but
not the latter.
Eventually, git should detect that conflicts have been resolved in
the working tree and tailor these messages further. Not only "use
git commit -a" could be resurected, but "Fix them up in the work
tree" should be dropped when it happens.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The data is streamed to the filter process anyway. Better avoid mapping
the file if possible. This is especially useful if a clean filter
reduces the size, for example if it computes a sha1 for binary data,
like git media. The file size that the previous implementation could
handle was limited by the available address space; large files for
example could not be handled with (32-bit) msysgit. The new
implementation can filter files of any size as long as the filter output
is small enough.
The new code path is only taken if the filter is required. The filter
consumes data directly from the fd. If it fails, the original data is
not immediately available. The condition can easily be handled as
a fatal error, which is expected for a required filter anyway.
If the filter was not required, the condition would need to be handled
in a different way, like seeking to 0 and reading the data. But this
would require more restructuring of the code and is probably not worth
it. The obvious approach of falling back to reading all data would not
help achieving the main purpose of this patch, which is to handle large
files with limited address space. If reading all data is an option, we
can simply take the old code path right away and mmap the entire file.
The environment variable GIT_MMAP_LIMIT, which has been introduced in
a previous commit is used to test that the expected code path is taken.
A related test that exercises required filters is modified to verify
that the data actually has been modified on its way from the file system
to the object store.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The caller, not this function, opened the file descriptor; it is
selfish for the callee to close it when it is done reading from it.
The caller may want an option to rewind and re-read the contents
after it returns.
Simplify the loop to copy the input in full to the output; its
body essentially is what a call to write_in_full() helper does.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to test expectations about mmap in a way similar to testing
expectations about malloc with GIT_ALLOC_LIMIT introduced by
d41489a6 (Add more large blob test cases, 2012-03-07), introduce a
new environment variable GIT_MMAP_LIMIT to limit the largest allowed
mmap length.
xmmap() is modified to check the size of the requested region and
fail it if it is beyond the limit. Together with GIT_ALLOC_LIMIT
tests can now confirm expectations about memory consumption.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT_ALLOC_LIMIT limits xmalloc()'s size, which is of type size_t.
Better use git_env_ulong() to parse the environment variable, so
that the postfixes 'k', 'm', and 'g' can be used; and use size_t to
store the limit for consistency. The change to size_t has no direct
practical impact, because the environment variable is only meant to
be used for our own tests, and we use it to test small sizes.
The cast of size in the call to die() is changed to uintmax_t to
match the format string PRIuMAX.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new function parses an integeral value that fits in unsigned
long in human readable form, i.e. possibly with unit suffix, e.g.
10k = 10240, etc., from an environment variable. Parsing of
GIT_MMAP_LIMIT and GIT_ALLOC_LIMIT will use it in later patches.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes users want to report a bug they experience on
their repository, but they are not at liberty to share the
contents of the repository. It would be useful if they could
produce a repository that has a similar shape to its history
and tree, but without leaking any information. This
"anonymized" repository could then be shared with developers
(assuming it still replicates the original problem).
This patch implements an "--anonymize" option to
fast-export, which generates a stream that can recreate such
a repository. Producing a single stream makes it easy for
the caller to verify that they are not leaking any useful
information. You can get an overview of what will be shared
by running a command like:
git fast-export --anonymize --all |
perl -pe 's/\d+/X/g' |
sort -u |
less
which will show every unique line we generate, modulo any
numbers (each anonymized token is assigned a number, like
"User 0", and we replace it consistently in the output).
In addition to anonymizing, this produces test cases that
are relatively small (compared to the original repository)
and fast to generate (compared to using filter-branch, or
modifying the output of fast-export yourself). Here are
numbers for git.git:
$ time git fast-export --anonymize --all \
--tag-of-filtered-object=drop >output
real 0m2.883s
user 0m2.828s
sys 0m0.052s
$ gzip output
$ ls -lh output.gz | awk '{print $5}'
2.9M
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many of the date functions write into fixed-size buffers.
This is a minor pain, as we have to take special
precautions, and frequently end up copying the result into a
strbuf or heap-allocated buffer anyway (for which we
sometimes use strcpy!).
Let's instead teach parse_date, datestamp, etc to write to a
strbuf. The obvious downside is that we might need to
perform a heap allocation where we otherwise would not need
to. However, it turns out that the only two new allocations
required are:
1. In test-date.c, where we don't care about efficiency.
2. In determine_author_info, which is not performance
critical (and where the use of a strbuf will help later
refactoring).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This saves us some manual parsing and makes the code more
readable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we hit the end-of-header without finding an "author"
line, we just return from the function. We should jump to
the fail_exit path to clean up the buffer that we may have
allocated.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually when we parse a commit, we read it line by line and
handle each individual line (e.g., parse_commit and
parse_commit_header). Sometimes, however, we only care
about extracting a single header. Code in this situation is
stuck doing an ad-hoc parse of the commit buffer.
Let's provide a reusable function to locate a header within
the commit. The code is modeled after pretty.c's
get_header, which is used to extract the encoding.
Since some callers may not have the "struct commit" to go
along with the buffer, we drop that parameter. The only
thing lost is a warning for truncated commits, but that's
OK. This shouldn't happen in practice, and even if it does,
there's no particular reason that this function needs to
complain about it. It either finds the header it was asked
for, or it doesn't (and in the latter case, the caller will
typically complain).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are already using the flex-array technique; let's
annotate it with our usual FLEX_ARRAY macro. Besides being
more readable, this is slightly more efficient on compilers
that understand flex-arrays.
Note that we need to bump the allocation in add_name_decoration,
which did not explicitly add one byte for the NUL terminator
of the string we are putting into the flex-array (it did not
need to before, because the struct itself was over-allocated
by one byte).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pushing a large number of refs works over most transports,
because we implement send-pack as an internal function.
However, it can sometimes fail when pushing over http,
because we have to spawn "git send-pack --stateless-rpc" to
do the heavy lifting, and we pass each refspec on the
command line. This can cause us to overflow the OS limits on
the size of the command line for a large push.
We can solve this by giving send-pack a --stdin option and
using it from remote-curl. We already dealt with this on
the fetch-pack side in 078b895 (fetch-pack: new --stdin
option to read refs from stdin, 2012-04-02). The stdin
option (and in particular, its use of packet-lines for
stateless-rpc input) is modeled after that solution.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code was useful when we kept a static list of header
files, and it was easy to forget to update it. Since the last
commit, we generate the list dynamically.
Technically this could still be used to find a dependency
that our dynamic check misses (e.g., a header file without a
".h" extension). But that is reasonably unlikely to be
added, and even less likely to be noticed by this tool
(because it has to be run manually)., It is not worth
carrying around the cruft in the Makefile.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reachability bitmaps do not work with shallow operations.
Fixes regression in 2.0.
* jk/pack-shallow-always-without-bitmap:
pack-objects: turn off bitmaps when we see --shallow lines
Move most of the code of absolute_path() into the new function
strbuf_add_absolute_path() and in the process transform it to use
struct strbuf and xgetcwd() instead of a PATH_MAX-sized buffer,
which can be too small on some file systems.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of dying of a segmentation fault if getcwd() returns NULL, use
xgetcwd() to make sure to write a useful error message and then exit
in an orderly fashion.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert several calls of getcwd() and die() to use xgetcwd() instead.
This way we get rid of fixed-size buffers (which can be too small
depending on the used file system) and gain consistent error messages.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the helper function xgetcwd(), which returns the current directory
or dies. The returned string has to be free()d after use.
Helped-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use strbuf instead of fixed-sized buffers in real_path() in order to
avoid the size limitations of the latter.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Store the original working directory in a strbuf instead of in a
fixed-sized buffer, in order to be able to handle longer paths.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert setup_git_directory_gently_1() and its helper functions
setup_explicit_git_dir(), setup_discovered_git_dir() and
setup_bare_git_dir() to use a struct strbuf to hold the current working
directory. Replacing the PATH_MAX-sized buffer used before removes a
path length limition on some file systems. The functions are converted
all in one go because they all read and write the variable cwd.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, we made add_name_decoration global
so that adders would not have to access the hash directly.
We now make the hash itself static so that callers _have_ to
add through our function, making sure that all additions go
through a single point. To do this, we have to add one more
accessor function: a way to lookup entries in the hash.
Since the only caller doesn't actually look at the returned
value, but rather only asks whether there is a decoration or
not, we could provide only a boolean "has_name_decoration".
That would allow us to make "struct name_decoration" local
to log-tree, as well.
However, it's unlikely to cause any maintainability harm
making the actual data public, and this interface is more
flexible if we need to look at decorations from other parts
of the code in the future.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The log-tree code keeps a "struct decoration" hash to show
text decorations for each commit during log traversals. It
makes this available to other files by providing global
access to the hash. This can result in other code adding
entries that do not conform to what log-tree expects.
For example, the bisect code adds its own "dist"
decorations to be shown. Originally the bisect code was
correct, but when the name_decoration code grew a new field
in eb3005e (commit.h: add 'type' to struct name_decoration,
2010-06-19), the bisect code was not updated. As a result,
the log-tree code can access uninitialized memory and even
segfault.
We can fix this by making name_decoration's adding function
public. If all callers use it, then any changes to struct
initialization only need to happen in one place (and because
the members come in as parameters, the compiler can notice a
caller who does not supply enough information).
As a bonus, this also means that the decoration hashes
created by the bisect code will use less memory (previously
we over-allocated space for the distance integer, but now we
format it into a temporary buffer and copy it to the final
flex-array).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some MUAs delete their "drafts" folder when it is empty, so
git imap-send should be able to create it if necessary.
This change checks that the folder exists immediately after
login and tries to create it if it is missing.
There was some vestigial code to handle a [TRYCREATE] response
from the server when an APPEND target is missing. However this
code never ran (the create and trycreate flags were never set)
and when I tried to make it run I found that the code had already
thrown away the contents of the message it was trying to append.
Signed-off-by: Tony Finch <dot@dotat.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
twoway_merge() is missing an o->gently check in the case where a file
that needs to be modified is missing from the index but present in the
old and new trees. As a result, in this case 'git checkout -m' errors
out instead of trying to perform a merge.
Fix it by checking o->gently. While at it, inline the o->gently check
into reject_merge to prevent future call sites from making the same
mistake.
Noticed by code inspection. The test for the motivating case was
added by JC.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most modern platforms will use automatically computed header
dependencies to figure out when a C file needs rebuilt due
to a header changing. With old compilers, however, we
fallback to a static list of header files. If any of them
changes, we recompile everything. This is overly
conservative, but the best we can do on older platforms.
It is unfortunately easy for our static header list to grow
stale, as none of the regular developers make use of it.
Instead of trying to keep it up to date, let's invoke "find"
to generate the list dynamically.
Since we do not use the value $(LIB_H) unless either
COMPUTE_HEADER_DEPENDENCIES is turned on or the user is
building "po/git.pot" (where it comes in via $(LOCALIZED_C),
make is smart enough to not even run this "find" in most
cases. However, we do need to stop using the "immediate"
variable assignment ":=" for $(LOCALIZED_C). That's OK,
because it was not otherwise useful here.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
po/git.pot is normally used as-is and not regenerated by people
building git, so it is okay if an explicit "make po/git.pot" always
automatically regenerates it. Depend on the magic FORCE target
instead of explicitly keeping track of dependencies.
This simplifies the makefile, in particular preparing for a moment
when $(LIB_H), which is part of $(LOCALIZED_C), can be computed on the
fly. It also fixes a slight breakage in which changes to perl and shell
scripts did not trigger a rebuild of po/git.pot.
We still need a dependency on GENERATED_H, to force those files to be
built when regenerating git.pot.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since dd0b72c (bash prompt: use bash builtins to check stash
state, 2011-04-01), git-prompt checks whether we have a
stash by looking for $GIT_DIR/refs/stash. Generally external
programs should never do this, because they would miss
packed-refs.
That commit claims that packed-refs does not pack
refs/stash, but that is not quite true. It does pack the
ref, but due to a bug, fails to prune the ref. When we fix
that bug, we would want to be doing the right thing here.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a new annotated tag, we sprintf the refname
into a static-sized buffer. If we have an absurdly long
tagname, like:
git init repo &&
cd repo &&
git commit --allow-empty -m foo &&
git tag -m message mytag &&
git fast-export mytag |
perl -lpe '/^tag/ and s/mytag/"a" x 8192/e' |
git fast-import <input
we'll overflow the buffer. We can fix it by using a strbuf.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a global pointer pack_data pointing to the current
pack we have open. Inside end_packfile we have two new
pointers, old_p and new_p. The latter points to pack_data,
and the former points to the new "installed" version of the
packfile we get when we hand the file off to the regular
sha1_file machinery. When then free old_p.
Presumably the extra old_p pointer was there so that we
could overwrite pack_data with new_p and still free old_p,
but we don't do that. We just leave pack_data pointing to
bogus memory, and don't overwrite it until we call
start_packfile again (if ever).
This can cause problems for our die routine, which calls
end_packfile to clean things up. If we die at the wrong
moment, we can end up looking at invalid memory in
pack_data left after the last end_packfile().
Instead, let's make sure we set pack_data to NULL after we
free it, and make calling endfile() again with a NULL
pack_data a noop (there is nothing to end).
We can further make things less confusing by dropping old_p
entirely, and moving new_p closer to its point of use.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After we have packed all refs, we prune any loose refs that
correspond to what we packed. We do so by first taking a
lock with lock_ref_sha1, and then deleting the loose ref
file.
However, lock_ref_sha1 will refuse to take a lock on any
refs that exist at the top-level of the "refs/" directory,
and we skip pruning the ref. This is almost certainly not
what we want to happen here. The criteria to be pruned
should not differ from that to be packed; if a ref makes it
to prune_ref, it's because we want it both packed and
pruned (if there are refs you do not want to be packed, they
should be omitted much earlier by pack_ref_is_possible,
which we do in this case if --all is not given).
We can fix this by switching to lock_any_ref_for_update.
This behaves exactly the same with the exception of this
top-level check.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to 16445242 (fetch-pack: avoid quadratic list insertion in
mark_complete), sort only after all refs are collected instead of while
inserting. The result is the same, but it's more efficient that way.
The difference will only be measurable in repositories with a large
number of refs.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to 16445242 (fetch-pack: avoid quadratic list insertion in
mark_complete), sort only after all refs are collected instead of while
inserting. The result is the same, but it's more efficient that way.
The difference will only be measurable in repositories with a large
number of refs.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep poll's timeout at -1 when uploadpack.keepalive = 0, instead of
setting it to -1000, since some pedantic old systems (eg HP-UX) and
the gnulib compat/poll will treat only -1 as the valid value for
an infinite timeout.
Signed-off-by: Edward Thomson <ethomson@microsoft.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is only the path that matters in the decision whether to filter
or not. Clarify this by making path the only argument of
would_convert_to_git().
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unless there is a good reason, we should use die() rather than
fprintf/exit. We can also shorten the message to match other curl init
failures (and match our usual lowercase no-full-stop style).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we do a combined diff, we individually diff against
each parent, and then use intersect_paths to do a parallel
walk through the sorted results and come up with a final
list of interesting paths.
The sort order here is that returned by the diffs, which
means it is in git's tree-order which sorts sub-trees as if
their paths have "/" at the end. When we do our parallel
walk, we need to use a comparison function which provides
the same order.
Since 8518ff8 (combine-diff: optimize combine_diff_path sets
intersection, 2014-01-20), we use a simple strcmp to
compare the pathnames, and get this wrong. It's somewhat
hard to trigger because normally a diff does not produce
tree entries at all, and therefore the sort order is the
same as a strcmp. However, if the "-t" option is used with
the diff, then we will produce diff_filepairs for both trees
and files.
We can use base_name_compare to do the comparison, just as
the tree-diff code does. Even though what we have are not
technically base names (they are full paths within the
tree), the end result is the same (we do not care about
interior slashes at all, only about the final character).
However, since we do not have the length of each path
stored, we take a slight shortcut: if neither of the entries
is a sub-tree then the comparison is equivalent to a strcmp.
This lets us skip the extra strlen calls in the common case
without having to reimplement base_name_compare from
scratch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the imap_folder variable to folder and make it a member
of struct imap_server_conf.
Signed-off-by: Bernhard Reiter <ockham@raz.or.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge prepare_run_command_v_opt() and its only caller. This removes a
pointer indirection and allows to initialize the struct child_process
using CHILD_PROCESS_INIT.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a helper function for initializing those struct child_process
variables for which the macro CHILD_PROCESS_INIT can't be used.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most struct child_process variables are cleared using memset first after
declaration. Provide a macro, CHILD_PROCESS_INIT, that can be used to
initialize them statically instead. That's shorter, doesn't require a
function call and is slightly more readable (especially given that we
already have STRBUF_INIT, ARGV_ARRAY_INIT etc.).
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The perf tests need a repository to operate on; if none is
defined, we fall back to the repository containing our build
directory. That fails, though, for an exported tarball of
git.git, which has no repository.
Since 5d7fd6d we run the perf tests as part of "make
profile". Therefore "make profile" fails out of the box on
released tarballs of v2.1.0.
We can fix this by making the perf tests optional; if they
are skipped, we still run the regular test suite, which
should give a lot of profile data (and is what we used to do
prior to 5d7fd6d anyway).
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently if we have a config file like,
[foo]
baz
bar =
and we try something like, "git config --add foo.baz roll", Git will
segfault. Moreover, for "git config --add foo.bar roll", it will
overwrite the original value instead of appending after the existing
empty value.
The problem lies with the regexp used for simulating --add in
`git_config_set_multivar_in_file()`, "^$", which in ideal case should
not match with any string but is true for empty strings. Instead use a
regexp like "a^" which can not be true for any string, empty or not.
For removing the segfault add a check for NULL values in `matches()` in
config.c.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You should be able to run "make" in contrib/subtree with no
arguments and get the "all" target. This was broken by 8e2a5cc
(contrib/subtree/Makefile: use GIT-VERSION-FILE, 2014-05-06), which
put the rule for GIT-VERSION-FILE higher in the file.
We can fix this by putting an empty "all::" target at the top of the
file, just like our main Makefile does, and document that fact.
That fixes this instance and future-proofs against it happening
again.
Reported-by: Jack Nagel <jacknagel@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are given two SHA-1 and asked to determine if they are different
(but not _what_ differences), we know right away by comparing SHA-1.
A side effect of this patch is, because large files are marked binary,
diff-tree will not need to unpack them. 'diff-index --cached' will not
either. But 'diff-files' still does.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Too large files may lead to failure to allocate memory. If it happens
here, it could impact quite a few commands that involve
diff. Moreover, too large files are inefficient to compare anyway (and
most likely non-text), so mark them binary and skip looking at their
content.
Noticed-by: Dale R. Worley <worley@alum.mit.edu>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fewer die() gives better control to the caller, provided that the
caller _can_ handle it. And in unpack_compressed_entry() case, it can,
because unpack_compressed_entry() already returns NULL if it fails to
inflate data.
A side effect from this is fsck continues to run when very large blobs
are present (and do not fit in memory).
Noticed-by: Dale R. Worley <worley@alum.mit.edu>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use static inline functions instead of macros for has_dos_drive_prefix,
offset_1st_component, is_dir_sep and find_last_dir_sep in order to let
the compiler do type checking.
The definitions of offset_1st_component and is_dir_sep are switched
around because the former uses the latter.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Explicitly state that menu_item functions like clean_cmd don't take
any arguments by using void instead of an empty parameter list.
Found using gcc -Wstrict-prototypes.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I always have to scratch my head every time I see this cryptic
pattern "[15678]\."; leave a short note to remind the maintainer
and the reviewers.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Older MacOS systems prior to 10.5 do not have the CommonCrypto
support Git uses so set NO_APPLE_COMMON_CRYPTO on those systems.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The helper function test_i18ngrep pretends that it found the expected
results when it is running under GETTEXT_POISON. For this reason, it must
not be used negated like so
! test_i18ngrep foo bar
because the test case would fail under GETTEXT_POISON. The function offers
a special syntax to test that a pattern is *not* found:
test_i18ngrep ! foo bar
Convert incorrect uses to this syntax.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `git_config_get_string_const()` instead of `git_config()` to take
advantage of the config-set API which provides a cleaner control flow.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `git_config_get_int()` instead of `git_config()` to take advantage
of the config-set API which provides a cleaner control flow.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is one slight behavior change, previously "merge.default"
silently ignored a NULL value and didn't raise any error. But,
in the same function, all other values raise an error on a NULL
value. So to conform with other call sites in Git, a NULL value
for "merge.default" raises an error.
The the new config-set API is not very useful here, because much of
the function is dedicated to processing "merge.<name>.variable",
which the new API does not handle well. If it were for variables
like, "merge.summary", "merge.tool", and "merge.verbosity", we could
use the new API.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `git_config_get_*()` family instead of `git_config()` to take
advantage of the config-set API which provides a cleaner control flow.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Match the predominant style in git by following K&R style for if/else
cascades. Documentation/CodingStyle from linux.git explains:
Note that the closing brace is empty on a line of its own, _except_ in
the cases where it is followed by a continuation of the same statement,
ie a "while" in a do-statement or an "else" in an if-statement, like
this:
if (x == y) {
..
} else if (x > y) {
...
} else {
....
}
Rationale: K&R.
Also, note that this brace-placement also minimizes the number of empty
(or almost empty) lines, without any loss of readability.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the 'if (current)' block of twoway_merge, we handle the boring
errors by checking if the entry from the old tree, current index, and
new tree are present, to get a pathname for the error message from one
of them:
if (oldtree)
return o->gently ? -1 : reject_merge(oldtree, o);
if (current)
return o->gently ? -1 : reject_merge(current, o);
if (newtree)
return o->gently ? -1 : reject_merge(newtree, o);
return -1;
Since this is guarded by 'if (current)', the second test is guaranteed
to succeed. Moreover, any of the three entries, if present, would
have the same path because there is no rename detection in this code
path. Even if some day in the future the entries' paths differ, the
'current' path used in the index and worktree would presumably be the
most recognizable for the end user.
Simplify by just using 'current'.
Noticed by coverity, Id:290002
Signed-off-by: Stefan Beller <stefanbeller@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was found by coverity. (Id: 290001)
The variable 'output' is assigned to a value
after all gotos to the corrupt label.
Remove the goto by moving the errorhandling code to the
condition, which detects the error.
Signed-off-by: Stefan Beller <stefanbeller@gmail.com>
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Current branch is a descendant of the commit you are rebasing onto"
does not necessarily mean "rebase" requires "--force". For a plain
vanilla "history flattening" rebase, the rebase can be done without
forcing if there is a merge between the tip of the branch being
rebased and the commit you are rebasing onto, even if the tip is
descendant of the other.
[jc: reworded both the text and the log description]
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reachability bitmaps do not work with shallow operations,
because they cache a view of the object reachability that
represents the true objects. Whereas a shallow repository
(or a shallow operation in a repository) is inherently
cutting off the object graph with a graft.
We explicitly disallow the use of bitmaps in shallow
repositories by checking is_repository_shallow(), and we
should continue to do that. However, we also want to
disallow bitmaps when we are serving a fetch to a shallow
client, since we momentarily take on their grafted view of
the world.
It used to be enough to call is_repository_shallow at the
start of pack-objects. Upload-pack wrote the other side's
shallow state to a temporary file and pointed the whole
pack-objects process at this state with "git --shallow-file",
and from the perspective of pack-objects, we really were
in a shallow repo. But since b790e0f (upload-pack: send
shallow info over stdin to pack-objects, 2014-03-11), we do
it differently: we send --shallow lines to pack-objects over
stdin, and it registers them itself.
This means that our is_repository_shallow check is way too
early (we have not been told about the shallowness yet), and
that it is insufficient (calling is_repository_shallow is
not enough, as the shallow grafts we register do not change
its return value). Instead, we can just turn off bitmaps
explicitly when we see these lines.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even the documentation tells us:
You should check if it returns any error (non-zero return
code) and if it does not, you can start using get_revision()
to do the iteration.
In preparation for this commit, I grepped all occurrences of
prepare_revision_walk and added error messages, when there were none.
Signed-off-by: Stefan Beller <stefanbeller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main loop in strbuf_utf8_replace() could summed up as:
while ('src' is still valid) {
1) advance 'src' to copy ANSI escape sequences
2) advance 'src' to copy/replace visible characters
}
The problem is after #1, 'src' may have reached the end of the string
(so 'src' points to NUL) and #2 will continue to copy that NUL as if
it's a normal character. Because the output is stored in a strbuf,
this NUL accounted in the 'len' field as well. Check after #1 and
break the loop if necessary.
The test does not look obvious, but the combination of %>>() should
make a call trace like this
show_log()
pretty_print_commit()
format_commit_message()
strbuf_expand()
format_commit_item()
format_and_pad_commit()
strbuf_utf8_replace()
where %C(auto)%d would insert a color reset escape sequence in the end
of the string given to strbuf_utf8_replace() and show_log() uses
fwrite() to send everything to stdout (including the incorrect NUL
inserted by strbuf_utf8_replace)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Free the refspec.
Found by scan.coverity.com (Id: 1127806)
Signed-off-by: Stefan Beller <stefanbeller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't add paths with leading symlinks to the index while refreshing; we
only track those symlinks themselves. We already ignore them while
preloading (see read_index_preload.c).
Reported-by: Nikolay Avdeev <avdeev@math.vsu.ru>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce the GIT_GUI_LIB_DIR environment variable, to tell git-gui
where to look for TCL libs. This allows a git-gui which has been
built with a prefix of /foo to be run out of directory /bar. This is
the equivalent of GIT_EXEC_PATH or GITPERLLIB but for git-gui's TCL
libraries.
Signed-off-by: David Turner <dturner@twitter.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Add a third step `git commit` after adding files for the first time.
Signed-off-by: Linus Arver <linusarver@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use shorter sentences to describe what actually happens. We describe
what the term "Git symbolic link" actually means.
Also, we separate out the description of the behavioral change upon
reinitialization into its own paragraph.
Signed-off-by: Linus Arver <linusarver@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use backticks when we quote something that the user should literally
use.
Signed-off-by: Linus Arver <linusarver@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit c9a42c4 (bundle: allow rev-list options to exclude annotated
tags, 2009-01-02), support for excluding annotated tags outside the
specified date range was added. However, the wrong order of parameters
was chosen when calling memchr().
Fix this by swapping the character to search for with the maximum length
parameter. Also cover this behavior with an additional test.
Signed-off-by: Lukas Fleischer <git@cryptocrack.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you list stashes, you can provide arbitrary git-log
options to change the display. However, adding just "-p"
does nothing, because each stash is actually a merge commit.
This implementation detail is easy to forget, leading to
confused users who think "-p" is not working. We can make
this easier by defaulting to "--first-parent -m", which will
show the diff against the working tree. This omits the
index portion of the stash entirely, but it's simple and it
matches what "git stash show" provides.
People who are more clueful about stash's true form can use
"--cc" to override the "-m", and the "--first-parent" will
then do nothing. For diffs, it only affects non-combined
diffs, so "--cc" overrides it. And for the traversal, we are
walking the linear reflog anyway, so we do not even care
about the parents.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `git_config_get_string()` instead of `git_config()` to take advantage of
the config-set API which provides a cleaner control flow. While we are at
it, return -1 if we find no value for the queried variable. Original code
returned 0 for all cases, which was checked by `add_branch_desc()` in
fmt-merge-msg.c resulting in addition of a spurious newline to the `out`
strbuf. Now, the newline addition is skipped as -1 is returned to the caller
if no value is found.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `git_config_get_string()` instead of `git_config()` to take advantage of
the config-set API which provides a cleaner control flow.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `git_config_get_*()` family instead of `git_config()` to take advantage of
the config-set API which provides a cleaner control flow.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `git_config_get_value()` instead of `git_config()` to take advantage of
the config-set API which provides a cleaner control flow.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `git_config_get_*()` family instead of `git_config()` to take advantage of
the config-set API which provides a cleaner control flow.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `git_config_get_*()` family instead of `git_config()` to take advantage of
the config-set API which provides a cleaner control flow.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `git_config_get_*()` family instead of `git_config()` to take advantage of
the config-set API which provides a cleaner control flow.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `git_config_get_bool()` family instead of `git_config()` to take advantage of
the config-set API which provides a cleaner control flow.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `git_config_get_*()` family instead of `git_config()` to take
advantage of the config-set API which provides a cleaner control flow.
Use an intermediate value, as `version` can not be used directly in
git_config_get_int() due to incompatible type.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `git_config_get_bool()` family instead of `git_config()` to take advantage of
the config-set API which provides a cleaner control flow.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use `git_config_get_bool()` family instead of `git_config()` to take advantage of
the config-set API which provides a cleaner control flow.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whitespace breakages are checked while the patch is being parsed.
Disable them at the beginning of parse_chunk(), where each
individual patch is parsed, immediately after we learn the name of
the file the patch applies to and before we start parsing the diff
contained in the patch.
One may naively think that we should be able to not just skip the
whitespace checks but simply fast-forward to the next patch without
doing anything once use_patch() tells us that this patch is not
going to be used. But in reality we cannot really skip much of the
parsing in order to do such a "fast-forward", primarily because
parsing "@@ -k,l +m,n @@" lines and counting the input lines is how
we determine the boundaries of individual patches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We parse each patchfile and find the name of the path the patch
applies to, and then use that name to consult the attribute system
to find the whitespace rules to be used, and also the target file
(either in the working tree or in the index) to replay the changes
against.
Unlike a Git-generated patch, a non-Git patch is taken to have the
pathnames relative to the current working directory. The names
found in such a patch are modified by prepending the prefix by the
prefix_patches() helper function introduced in 56185f49 (git-apply:
require -p<n> when working in a subdirectory., 2007-02-19).
However, this prefixing is done after the patch is fully parsed and
affects only what target files are patched. Because the attributes
are checked against the names found in the patch during the parsing,
not against the final pathname, the whitespace check that is done
during parsing ends up using attributes for a wrong path for non-Git
patches.
Fix this by doing the prefix much earlier, immediately after the
header part of each patch is parsed and we learn the name of the
path the patch affects.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for `git_config_get_string_const()`, check whether it
dies printing the line number and the file name if a NULL
value is retrieved for the given key.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Semantic errors (for example, for alias.* variables NULL values are
not allowed) in configuration files cause a die printing the line
number and file name of the offending value.
Add a test documenting that such errors cause a die printing the
accurate line number and file name.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Of all the functions in `git_config*()` family, `git_config()` has the
most invocations in the whole code base. Each `git_config()` invocation
causes config file rereads which can be avoided using the config-set API.
Use the config-set API to rewrite `git_config()` to use the config caching
layer to avoid config file rereads on each invocation during a git process
lifetime. First invocation constructs the cache, and after that for each
successive invocation, `git_config()` feeds values from the config cache
instead of rereading the configuration files.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add `git_die_config` that dies printing the line number and the file name
of the highest priority value for the configuration variable `key`. A custom
error message is also printed before dying, specified by the caller, which can
be skipped if `err` argument is set to NULL.
It has usage in non-callback based config value retrieval where we can
raise an error and die if there is a semantic error.
For example,
if (!git_config_get_value(key, &value)){
if (!strcmp(value, "foo"))
git_config_die(key, "value: `%s` is illegal", value);
else
/* do work */
}
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently `git_config()` returns an integer signifying an error code.
During rewrites of the function most of the code was shifted to
`git_config_with_options()`. `git_config_with_options()` normally
returns positive values if its `config_source` parameter is set as NULL,
as most errors are fatal, and non-fatal potential errors are guarded
by "if" statements that are entered only when no error is possible.
Still a negative value can be returned in case of race condition between
`access_or_die()` & `git_config_from_file()`. Also, all callers of
`git_config()` ignore the return value except for one case in branch.c.
Change `git_config()` return value to void and make it die if it receives
a negative value from `git_config_with_options()`.
Original-patch-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Store file name and line number for each key-value pair in the cache
during parsing of the configuration files.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a callback returns a negative value to `git_config*()` family,
they call `die()` while printing the line number and the file name.
Currently the printed line number is off by one, thus printing the
wrong line number.
Make `linenr` point to the line we just parsed during the call
to callback to get accurate line number in error messages.
Commit-message-by: Tanay Abhra <tanayabh@gmail.com>
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inspired by 2147fa7e (2014-07-31 git-push: fix link in man page),
I grepped through the whole tree searching for 'gitlink:' occurrences.
Signed-off-by: Stefan Beller <stefanbeller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It wouldn't make sense for these configuration variables to be
required for Git in general to function. 'Required' in this context
means required for git imap-send to work.
Noticed while trying to figure out what the sentence describing
imap.tunnel meant.
[jn: expanded to also simplify explanation of imap.folder and
imap.host in the same way]
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a config file, you can do:
[foo]
bar
to turn the "foo.bar" boolean flag on, and you can do:
[foo]
bar=
to set "foo.bar" to the empty string. However, git's "-c"
parameter treats both:
git -c foo.bar
and
git -c foo.bar=
as the boolean flag, and there is no way to set a variable
to the empty string. This patch enables the latter form to
do that.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git_pretty_formats_config()` continues without checking git_config_string's
return value which can lead to a SEGFAULT. Instead return -1 when
git_config_string fails signalling `git_config()` to die printing the location
of the erroneous variable.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git archive's tar format uses extended pax headers to encode metadata
into the archive. Most tar implementations correctly treat these as
metadata, but some that do not understand the pax format extract these
as files instead. Apply the tar.umask setting to these entries to
prevent tampering by other users.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Explicitly mention that leaving imap.authMethod unset makes
git imap-send use the basic IMAP plaintext LOGIN command.
Signed-off-by: Tony Finch <dot@dotat.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make tests pass on msysgit by mostly disabling ones that are
infeasible on that platform.
* sk/mingw-tests-workaround:
t800[12]: work around MSys limitation
t9902: mingw-specific fix for gitfile link files
t4210: skip command-line encoding tests on mingw
MinGW: disable legacy encoding tests
t0110/MinGW: skip tests that pass arbitrary bytes on the command line
MinGW: Skip test redirecting to fd 4
Most of these are battle-tested in msysgit and are needed to
complete what has been merged to 'master' already.
* sk/mingw-uni-fix-more:
Win32: enable color output in Windows cmd.exe
Win32: patch Windows environment on startup
Win32: keep the environment sorted
Win32: use low-level memory allocation during initialization
Win32: reduce environment array reallocations
Win32: don't copy the environment twice when spawning child processes
Win32: factor out environment block creation
Win32: unify environment function names
Win32: unify environment case-sensitivity
Win32: fix environment memory leaks
Win32: Unicode environment (incoming)
Win32: Unicode environment (outgoing)
Revert "Windows: teach getenv to do a case-sensitive search"
tests: do not pass iso8859-1 encoded parameter
If the user provides an empty format with "--format=", we
end up putting in extra whitespace that the user cannot
prevent. This comes from two places:
1. If the format is missing a terminating newline, we add
one automatically. This makes sense for --format=%h, but
not for a truly empty format.
2. We add an extra newline between the pretty-printed
format and a diff or diffstat. If the format is empty,
there's no point in doing so if there's nothing to
separate.
With this patch, one can get a diff with no other cruft out
of "diff-tree --format= $commit".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now, we treated "--pretty=" or "--format=" as "give me
the default format". This was not planned nor documented,
but only what happened to work due to our parsing of
"--pretty" (which should give the default format).
Let's instead let these be an actual empty userformat.
Otherwise one must write out the annoyingly long
"--pretty=tformat:" to get the same behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, we parsed pretty options by looking for
"--pretty" at the start of the string, and then feeding the
rest (including an "=") to get_commit_format. Later, commit
48ded91 (log --pretty: do not accept bogus "--prettyshort",
2008-05-25) split this into a separate check for "--pretty"
versus "--pretty=".
However, when parsing "--pretty", we still passed "arg+8" to
get_commit_format. This is useless, since it will always
point to the NUL terminator at the end of the string. We can
simply pass NULL instead; both parameters are treated the
same by get_commit_format.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace TODO introduced in commit 9c3c22 with documentation
explaining Git config API functions for writing configuration
files.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remotes are stored as an array, so looking one up or adding one without
duplication is an O(n) operation. Reading an entire config file full of
remotes is O(n^2) in the number of remotes. For a repository with tens of
thousands of remotes, the running time can hit multiple minutes.
Hash tables are way faster. So we add a hashmap from remote name to
struct remote and use it for all lookups. The time to add a new remote to
a repo that already has 50,000 remotes drops from ~2 minutes to < 1
second.
We retain the old array of remotes so iterators proceed in config-file
order.
Signed-off-by: Patrick Reynolds <patrick.reynolds@github.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose the `config_set` C API as a set of simple commands in order to
facilitate testing. Add tests for the `config_set` API as well as for
`git_config_get_*()` family for the usual config files.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently `git_config()` uses a callback mechanism and file rereads for
config values. Due to this approach, it is not uncommon for the config
files to be parsed several times during the run of a git program, with
different callbacks picking out different variables useful to themselves.
Add a `config_set`, that can be used to construct an in-memory cache for
config-like files that the caller specifies (i.e., files like `.gitmodules`,
`~/.gitconfig` etc.). Add two external functions `git_configset_get_value`
and `git_configset_get_value_multi` for querying from the config sets.
`git_configset_get_value` follows `last one wins` semantic (i.e. if there
are multiple matches for the queried key in the files of the configset the
value returned will be the last entry in `value_list`).
`git_configset_get_value_multi` returns a list of values sorted in order of
increasing priority (i.e. last match will be at the end of the list). Add
type specific query functions like `git_configset_get_bool` and similar.
Add a default `config_set`, `the_config_set` to cache all key-value pairs
read from usual config files (repo specific .git/config, user wide
~/.gitconfig, XDG config and the global /etc/gitconfig). `the_config_set`
is populated using `git_config()`.
Add two external functions `git_config_get_value` and
`git_config_get_value_multi` for querying in a non-callback manner from
`the_config_set`. Also, add type specific query functions that are
implemented as a thin wrapper around the `config_set` API.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Feeding the result of a real_path() call to real_path() again doesn't
change that result -- the returned path won't get any more real. Avoid
such a double call in set_git_dir_init() and for the same reason stop
calling real_path() before feeding paths to set_git_work_tree(), as the
latter already takes care of that.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using a PATH_MAX-sized buffer, which can be too small on some
file systems, use strbuf_getcwd(), which handles any path getcwd()
returns. Also preserve the errno set by strbuf_getcwd() instead of
setting it to ENAMETOOLONG; that way a more appropriate error message
can be shown based on the actual reason for failing.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add strbuf_getcwd(), which puts the current working directory into a
strbuf. Because it doesn't use a fixed-size buffer it supports
arbitrarily long paths, provided the platform's getcwd() does as well.
At least on Linux and FreeBSD it handles paths longer than PATH_MAX
just fine.
Suggested-by: Karsten Blees <karsten.blees@gmail.com>
Helped-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t4013: test diff-tree's --stdin commit formatting
diff-tree: avoid lookup_unknown_object
object_as_type: set commit index
alloc: factor out commit index
add object_as_type helper for casting objects
parse_object_buffer: do not set object type
move setting of object->type to alloc_* functions
alloc: write out allocator definitions
alloc.c: remove the alloc_raw_commit_node() function
This has been illegal since cbdffe4 (check_ref_format(): tighten
refname rules, 2009-03-21), but we never tested it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase --fork-point" did not filter out patch-identical
commits correctly.
* jk/rebase-am-fork-point:
rebase: omit patch-identical commits with --fork-point
rebase--am: use --cherry-pick instead of --ignore-if-in-upstream
"git replace" learned a "--graft" option to rewrite parents of a
commit.
* cc/replace-graft:
replace: add test for --graft with a mergetag
replace: check mergetags when using --graft
replace: add test for --graft with signed commit
replace: remove signature when using --graft
contrib: add convert-grafts-to-replace-refs.sh
Documentation: replace: add --graft option
replace: add test for --graft
replace: add --graft option
replace: cleanup redirection style in tests
* jk/stable-prio-queue:
t5539: update a flaky test
paint_down_to_common: use prio_queue
prio-queue: make output stable with respect to insertion
prio-queue: factor out compare and swap operations
When the user has no user-wide configuration file, it's faster to use the
newly introduced config file template than to run two commands to set
user.name and user.email. Advise this to the user.
The old advice is kept if the user already has a configuration file since
the template feature would not trigger in this case.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The caller can signal that it is not interested in learning
the location of $HOME/.gitconfig by passing global=NULL, but
there is no way to decline the path to the configuration
file based on $XDG_CONFIG_HOME.
Allow the caller to pass xdg=NULL to signal that it is not
interested in the XDG location.
Commit-message-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user has no ~/.gitconfig file, git config --global --edit used
to launch an editor on an nonexistant file name.
Instead, create a file with a default content before launching the
editor. The template contains only commented-out entries, to save a few
keystrokes for the user. If the values are guessed properly, the user
will only have to uncomment the entries.
Advanced users teaching newbies can create a minimalistic configuration
faster for newbies. Beginners reading a tutorial advising to run "git
config --global --edit" as a first step will be slightly more guided for
their first contact with Git.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing "index" lines from a git-diff, we look for a
space followed by the mode. If we don't have a space, then
we set our pointer to the end-of-line. However, we don't
double-check that our end-of-line pointer is valid (e.g., if
we got a truncated diff input), which could lead to some
wrap-around pointer arithmetic.
In most cases this would probably get caught by our "40 <
len" check later in the function, but to be on the safe
side, let's just use strchrnul to treat end-of-string the
same as end-of-line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we see the core.commentchar config option, we extract
the string with git_config_string, which does two things:
1. It complains via config_error_nonbool if there is no
string value.
2. It makes a copy of the string.
Since we immediately parse the string into its
single-character value, we only care about (1). And in fact
(2) is a detriment, as it means we leak the copy. Instead,
let's just check the pointer value ourselves, and parse
directly from the const string we already have.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function starts by creating a copy of the static buffer
returned by real_path, but forgets to free it in the error
code paths. We can solve this by jumping to the cleanup code
that is already there.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A call to "dwim_ref(name, len, flags, &ref)" will allocate a
new string in "ref" to return the exact ref we found. We do
not consistently free it in all code paths, leading to small
leaks. The worst is in get_sha1_basic, which may be called
many times (e.g., by "cat-file --batch"), though it is
relatively unlikely, as it only triggers on a bogus reflog
specification.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to do this so could pass a mutable string to
enter_repo. But since 1c64b48 (enter_repo: do not modify
input, 2011-10-04), this is not necessary.
The resulting code is simpler, and it fixes a minor leak.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unix-domain socket used by the sample credential cache daemon
tried to unlink an existing stale one at a wrong path, if the path
to the socket was given as an overlong path that does not fit in
sun_path member of the sockaddr_un structure.
* rs/fix-unlink-unix-socket:
unix-socket: remove stale socket before calling chdir()
Apply the "if cloning from a local disk, physically copy repository
using hardlinks, unless otherwise told not to with --no-local"
optimization when url.*.insteadOf mechanism rewrites a "git clone
$URL" that refers to a repository over the network to a clone from
a local disk.
* mb/local-clone-after-applying-insteadof:
use local cloning if insteadOf makes a local URL
Since the argument to `--recurse-submodules` is mandatory, it does not
need to be stuck to the option with `=`.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/code-cleaning:
remote-testsvn: use internal argv_array of struct child_process in cmd_import()
bundle: use internal argv_array of struct child_process in create_bundle()
fast-import: use hashcmp() for SHA1 hash comparison
transport: simplify fetch_objs_via_rsync() using argv_array
run-command: use internal argv_array of struct child_process in run_hook_ve()
use commit_list_count() to count the members of commit_lists
strbuf: use strbuf_addstr() for adding C strings
Make sure all in-core commit objects are assigned a unique number
so that they can be annotated using the commit-slab API.
* jk/alloc-commit-id:
diff-tree: avoid lookup_unknown_object
object_as_type: set commit index
alloc: factor out commit index
add object_as_type helper for casting objects
parse_object_buffer: do not set object type
move setting of object->type to alloc_* functions
alloc: write out allocator definitions
alloc.c: remove the alloc_raw_commit_node() function
* kb/perf-trace:
api-trace.txt: add trace API documentation
progress: simplify performance measurement by using getnanotime()
wt-status: simplify performance measurement by using getnanotime()
git: add performance tracing for git's main() function to debug scripts
trace: add trace_performance facility to debug performance issues
trace: add high resolution timer function to debug performance issues
trace: add 'file:line' to all trace output
trace: move code around, in preparation to file:line output
trace: add current timestamp to all trace output
trace: disable additional trace output for unit tests
trace: add infrastructure to augment trace output with additional info
sha1_file: change GIT_TRACE_PACK_ACCESS logging to use trace API
Documentation/git.txt: improve documentation of 'GIT_TRACE*' variables
trace: improve trace performance
trace: remove redundant printf format attribute
trace: consistently name the format parameter
trace: move trace declarations from cache.h to new trace.h
test_have_prereq does understand multiple predicates given as
separate arguments, but that is by accident. We should list the
prerequisites just like we use them as the (first) optional
parameter for test_expect_success, concatenated with commas, for
consistency.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support for Back when bdccd3c1 (test-lib: allow negation of
prerequisites, 2012-11-14) introduced negated predicates
(e.g. "!MINGW,!CYGWIN"), we already had 5 test files that use
NOT_MINGW (and a few MINGW) as prerequisites.
Let's not add NOT_FOO and rewrite existing ones as !FOO for both
MINGW and CYGWIN.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using --graft, with a mergetag in the original
commit, we should check that the commit pointed to by
the mergetag is still a parent of then new commit we
create, otherwise the mergetag could be misleading.
If the commit pointed to by the mergetag is no more
a parent of the new commit, we could remove the
mergetag, but in this case there is a good chance
that the title or other elements of the commit might
also be misleading. So let's just error out and
suggest to use --edit instead on the commit.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It could be misleading to keep a signature in a
replacement commit, so let's remove it.
Note that there should probably be a way to sign
the replacement commit created when using --graft,
but this can be dealt with in another commit or
patch series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds into contrib/ an example script to convert
grafts from an existing grafts file into replace refs using
the new --graft option of "git replace".
While at it let's mention this new script in the
"git replace" documentation for the --graft option.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage string for this option is:
git replace [-f] --graft <commit> [<parent>...]
First we create a new commit that is the same as <commit>
except that its parents are [<parents>...]
Then we create a replace ref that replace <commit> with
the commit we just created.
With this new option, it should be straightforward to
convert grafts to replace refs.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replaces the only two uses of fchmod() with chmod() because the
former does not work on Windows port and because luckily we can.
* kb/avoid-fchmod-for-now:
config: use chmod() instead of fchmod()
* kb/hashmap-updates:
hashmap: add string interning API
hashmap: add simplified hashmap_get_from_hash() API
hashmap: improve struct hashmap member documentation
hashmap: factor out getting a hash code from a SHA1
* jk/remote-curl-squelch-extra-errors:
remote-curl: mark helper-protocol errors more clearly
remote-curl: use error instead of fprintf(stderr)
remote-curl: do not complain on EOF from parent git
Early part of the "ref transaction" topic.
* rs/ref-transaction-0:
refs.c: change ref_transaction_update() to do error checking and return status
refs.c: remove the onerr argument to ref_transaction_commit
update-ref: use err argument to get error from ref_transaction_commit
refs.c: make update_ref_write update a strbuf on failure
refs.c: make ref_update_reject_duplicates take a strbuf argument for errors
refs.c: log_ref_write should try to return meaningful errno
refs.c: make resolve_ref_unsafe set errno to something meaningful on error
refs.c: commit_packed_refs to return a meaningful errno on failure
refs.c: make remove_empty_directories always set errno to something sane
refs.c: verify_lock should set errno to something meaningful
refs.c: make sure log_ref_setup returns a meaningful errno
refs.c: add an err argument to repack_without_refs
lockfile.c: make lock_file return a meaningful errno on failurei
lockfile.c: add a new public function unable_to_lock_message
refs.c: add a strbuf argument to ref_transaction_commit for error logging
refs.c: allow passing NULL to ref_transaction_free
refs.c: constify the sha arguments for ref_transaction_create|delete|update
refs.c: ref_transaction_commit should not free the transaction
refs.c: remove ref_transaction_rollback
* ak/profile-feedback-build:
Fix profile feedback with -jN and add profile-fast
Run the perf test suite for profile feedback too
Don't define away __attribute__ on gcc
Use BASIC_FLAGS for profile feedback
Using memset and then manually setting values of the string-list
members is not future proof as the internal representation of
string-list may change any time.
Use `string_list_init()` or STRING_LIST_INIT_* macros instead of
memset.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The string-list API has STRING_LIST_INIT_* macros to be used
to define variables with initializers, but lacks functions
to initialize an uninitialized piece of memory to be used as
a string-list at the run-time.
Introduce `string_list_init()` function for that.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MSys works very hard to convert Unix-style paths into DOS-style ones.
*Very* hard.
So hard, indeed, that
git blame -L/hello/,/green/
is translated into something like
git blame -LC:/msysgit/hello/,C:/msysgit/green/
As seen in msys_p2w in src\msys\msys\rt\src\winsup\cygwin\path.cc, line
3204ff:
case '-':
//
// here we check for POSIX paths as attributes to a POSIX switch.
//
...
seemingly absolute POSIX paths in single-letter options get expanded by
msys.dll unless they contain '=' or ';'.
So a quick and very dirty fix is to use '-L/;*evil/'. (Using an equal sign
works only when it is before a comma, so in the above example, /=*green/
would still be converted to a DOS-style path.)
The -L mangling can be done by the script, just before the parameter is
passed to the executable. This version does not modify the body of the
tests and is active on MinGW only.
Commit-message-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Author: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The path in a .git platform independent link file needs to be absolute
and under mingw we need it to be a windows type path, not a unix style
path so it should start with a drive letter and not a /.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows the application command line is provided as unicode and in
mingw-git we convert that to utf-8. So these tests that require a iso-8859-1
input are being subverted by the encoding transformations we perform and
should be skipped.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, all native APIs are Unicode-based. It is impossible to pass
legacy encoded byte arrays to a process via command line or environment
variables. Disable the tests that try to do so.
In t3901, most tests still work if we don't mess up the repository encoding
in setup, so don't switch to ISO-8859-1 on MinGW.
Note that i18n tests that do their encoding tricks via encoded files (such
as t3900) are not affected by this.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, the command line is a Unicode string, it is not possible to
pass arbitrary bytes to a program. Disable tests that try to do so.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
unix_stream_listen() is given a path. It calls unix_sockaddr_init(),
which in turn can call chdir(). After that a relative path doesn't
mean the same as before. Any use of the original path should thus
happen before that call. For that reason, unlink the given path
(to get rid of a possibly existing stale socket) right at the
beginning of the function.
Noticed-by: Karsten Blees <karsten.blees@gmail.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git requires the TERM environment variable to be set for all color*
settings. Simulate the TERM variable if it is not set (default on Windows).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix Windows specific environment settings on startup rather than checking
for special values on every getenv call.
As a side effect, this makes the patched environment (i.e. with properly
initialized TMPDIR and TERM) available to child processes.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Windows environment is sorted, keep it that way for O(log n)
environment access.
Change compareenv to compare only the keys, so that it can be used to
find an entry irrespective of the value.
Change lookupenv to binary seach for an entry. Return one's complement of
the insert position if not found (libc's bsearch returns NULL).
Replace MSVCRT's getenv with a minimal do_getenv based on the binary search
function.
Change do_putenv to insert new entries at the correct position. Simplify
the function by swapping if conditions and using memmove instead of for
loops.
Move qsort from make_environment_block to mingw_startup. We still need to
sort on startup to make sure that the environment is sorted according to
our compareenv function (while Win32 / CreateProcess requires the
environment block to be sorted case-insensitively, CreateProcess currently
doesn't enforce this, and some applications such as bash just don't care).
Note that environment functions are _not_ thread-safe and are not required
to be so by POSIX, the application is responsible for synchronizing access
to the environment. MSVCRT's getenv and our new getenv implementation are
better than that in that they are thread-safe with respect to other getenv
calls as long as the environment is not modified. Git's indiscriminate use
of getenv in background threads currently requires this property.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of d41489a6 "Add more large blob test cases", git's high-level memory
allocation functions (xmalloc, xmemdupz etc.) access the environment to
simulate limited memory in tests (see 'getenv("GIT_ALLOC_LIMIT")' in
memory_limit_check()). These functions should not be used before the
environment is fully initialized (particularly not to initialize the
environment itself).
The current solution ('environ = NULL; ALLOC_GROW(environ...)') only works
because MSVCRT's getenv() reinitializes environ when it is NULL (i.e. it
leaves us with two sets of unusabe (non-UTF-8) and unfreeable (CRT-
allocated) environments).
Add our own set of malloc-or-die functions to be used in startup code.
Also check the result of __wgetmainargs, which may fail if there's not
enough memory for wide-char arguments and environment.
This patch is in preparation of the sorted environment feature, which
completely replaces MSVCRT's getenv() implementation.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move environment array reallocation from do_putenv to the respective
callers. Keep track of the environment size in a global variable. Use
ALLOC_GROW in mingw_putenv to reduce reallocations. Allocate a
sufficiently sized environment array in make_environment_block to prevent
reallocations.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When spawning child processes via start_command(), the environment and all
environment entries are copied twice. First by make_augmented_environ /
copy_environ to merge with child_process.env. Then a second time by
make_environment_block to create a sorted environment block string as
required by CreateProcess.
Move the merge logic to make_environment_block so that we only need to copy
the environment once. This changes semantics of the env parameter: it now
expects a delta (such as child_process.env) rather than a full environment.
This is not a problem as the parameter is only used by start_command()
(all other callers previously passed char **environ, and now pass NULL).
The merge logic no longer xstrdup()s the environment strings, so do_putenv
must not free them. Add a parameter to distinguish this from normal putenv.
Remove the now unused make_augmented_environ / free_environ API.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Environment helper functions use random naming ('env' prefix or suffix or
both, with or without '_'). Change to POSIX naming scheme ('env' suffix,
no '_').
Env_setenv has more in common with putenv than setenv. Change to do_putenv.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The environment on Windows is case-insensitive. Some environment functions
(such as unsetenv and make_augmented_environ) have always used case-
sensitive comparisons instead, while others (getenv, putenv, sorting in
spawn*) were case-insensitive.
Prevent potential inconsistencies by using case-insensitive comparison in
lookup_env (used by putenv, unsetenv and make_augmented_environ).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All functions that modify the environment have memory leaks.
Disable gitunsetenv in the Makefile and use env_setenv (via mingw_putenv)
instead (this frees removed environment entries).
Move xstrdup from env_setenv to make_augmented_environ, so that
mingw_putenv no longer copies the environment entries (according to POSIX
[1], "the string [...] shall become part of the environment"). This also
fixes the memory leak in gitsetenv, which expects a POSIX compliant putenv.
[1] http://pubs.opengroup.org/onlinepubs/009695399/functions/putenv.html
Note: This patch depends on taking control of char **environ and having
our own mingw_putenv (both introduced in "Win32: Unicode environment
(incoming)").
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert environment from UTF-16 to UTF-8 on startup.
No changes to getenv() are necessary, as the MSVCRT version is implemented
on top of char **environ.
However, putenv / _wputenv from MSVCRT no longer work, for two reasons:
1. they try to keep environ, _wenviron and the Win32 process environment
in sync, using the default system encoding instead of UTF-8 to convert
between charsets
2. msysgit and MSVCRT use different allocators, memory allocated in git
cannot be freed by the CRT and vice versa
Implement mingw_putenv using the env_setenv helper function from the
environment merge code.
Note that in case of memory allocation failure, putenv now dies with error
message (due to xrealloc) instead of failing with ENOMEM. As git assumes
setenv / putenv to always succeed, this prevents it from continuing with
incorrect settings.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert environment from UTF-8 to UTF-16 when creating other processes.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the existing argv_array member instead of providing our own. This
way we don't have to initialize or clean it up explicitly.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the existing argv_array member instead of providing our own. This
way the argv_array is cleared after use automatically for us; it was
leaking before.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the existing argv_array member instead of building the arguments
list using a string array and a strbuf. This way we don't need magic
number constants and allocations are cleaned up for us automatically
by run_command().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the existing argv_array member instead of providing our own. This
way we don't have to initialize or clean it up explicitly.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call commit_list_count() instead of open-coding it repeatedly.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid code duplication and let strbuf_addstr() call strlen() for us.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the is_local logic to the place where origin remote has been setup and
check if the remote url can be used to do local cloning.
This saves a lot of space (and time) in some of the mirroring scenarios that
involve insteadOf rewrites.
Signed-off-by: Michael Barabanov <michael.barabanov@windriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit df599e9612.
As of 5e9637c6 "i18n: add infrastructure for translating Git with gettext",
eval_gettext uses MinGW envsubst.exe instead of git-sh-i18n--envsubst.exe
for variable substitution. This breaks git-submodule.sh messages and tests,
as envsubst.exe doesn't support case-sensitive environment lookup (the same
is true for almost everything on Windows, including MSys and Cygwin tools).
30a615ac "Windows/i18n: rename $path to prevent clashes with $PATH" renames
the conflicting variable in git-submodule.sh, so that it works on Windows
(i.e. with case-insensitive environment, regardless of the toolset).
Revert to the documented behaviour of case-insensitive environment on
Windows.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pretty much one year ago (94b410bba8, Jul 12 2013, .mailmap: Map
email addresses to names) I cleaned up the output of `git shortlog
-sne` of git.git by writing a .mailmap file fot the git.git project.
During the year Jens, Kazuki and Trần contributed to git.git using
different names, but the same email address; unify them.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for configuring default sort ordering for git tags. Command
line option will override this configured value, using the exact same
syntax.
Cc: Jeff King <peff@peff.net>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the `--fork-point` argument was added to `git rebase`, we changed
the value of $upstream to be the fork point instead of the point from
which we want to rebase. When $orig_head..$upstream is empty this does
not change the behaviour, but when there are new changes in the upstream
we are no longer checking if any of them are patch-identical with
changes in $upstream..$orig_head.
Fix this by introducing a new variable to hold the fork point and using
this to restrict the range as an extra (negative) revision argument so
that the set of desired revisions becomes (in fork-point mode):
git rev-list --cherry-pick --right-only \
$upstream...$orig_head ^$fork_point
This allows us to correctly handle the scenario where we have the
following topology:
C --- D --- E <- dev
/
B <- master@{1}
/
o --- B' --- C* --- D* <- master
where:
- B' is a fixed-up version of B that is not patch-identical with B;
- C* and D* are patch-identical to C and D respectively and conflict
textually if applied in the wrong order;
- E depends textually on D.
The correct result of `git rebase master dev` is that B is identified as
the fork-point of dev and master, so that C, D, E are the commits that
need to be replayed onto master; but C and D are patch-identical with C*
and D* and so can be dropped, so that the end result is:
o --- B' --- C* --- D* --- E <- dev
If the fork-point is not identified, then picking B onto a branch
containing B' results in a conflict and if the patch-identical commits
are not correctly identified then picking C onto a branch containing D
(or equivalently D*) results in a conflict.
This change allows us to handle both of these cases, where previously we
either identified the fork-point (with `--fork-point`) but not the
patch-identical commits *or* (with `--no-fork-point`) identified the
patch-identical commits but not the fact that master had been rewritten.
Reported-by: Ted Felix <ted@tedfelix.com>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both refs.c and fsck.c have their own private copies of the is_branch function.
Delete the is_branch function from fsck.c and make the version in refs.c
public.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no fchmod() on native Windows platforms (MinGW and MSVC), and the
equivalent Win32 API (SetFileInformationByHandle) requires Windows Vista.
Use chmod() instead.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An ancient rewrite passed a wrong pointer to a curl library
function in a rarely used code path.
* ah/fix-http-push:
http-push.c: make CURLOPT_IOCTLDATA a usable pointer
* rs/code-cleaning:
fsck: simplify fsck_commit_buffer() by using commit_list_count()
commit: use commit_list_append() instead of duplicating its code
merge: simplify merge_trivial() by using commit_list_append()
use strbuf_addch for adding single characters
use strbuf_addbuf for adding strbufs
* jl/test-lint-scripts:
t/Makefile: always test all lint targets when running tests
t/Makefile: check helper scripts for non-portable shell commands too
"filter-branch" left an empty single-parent commit that results when
all parents of a merge commit gets mapped to the same commit, even
under "--prune-empty".
* cb/filter-branch-prune-empty-degenerate-merges:
filter-branch: eliminate duplicate mapped parents
Merging changes into a file that ends in an incomplete line made the
last line into a complete one, even when the other branch did not
change anything around the end of file.
* mk/merge-incomplete-files:
git-merge-file: do not add LF at EOF while applying unrelated change
t6023-merge-file.sh: fix and mark as broken invalid tests
* jk/strip-suffix:
prepare_packed_git_one: refactor duplicate-pack check
verify-pack: use strbuf_strip_suffix
strbuf: implement strbuf_strip_suffix
index-pack: use strip_suffix to avoid magic numbers
use strip_suffix instead of ends_with in simple cases
replace has_extension with ends_with
implement ends_with via strip_suffix
add strip_suffix function
sha1_file: replace PATH_MAX buffer with strbuf in prepare_packed_git_one()
Teach "git replace --edit" mode a "--raw" option to allow
editing the bare-metal representation data of objects.
* jk/replace-edit-raw:
replace: add a --raw mode for --edit
Teach "git replace" an "--edit" mode.
* cc/replace-edit:
replace: use argv_array in export_object
avoid double close of descriptors handed to run_command
replace: replace spaces with tabs in indentation
An experiment to use two files (the base file and incremental
changes relative to it) to represent the index to reduce I/O cost
of rewriting a large index when only small part of the working tree
changes.
* nd/split-index: (32 commits)
t1700: new tests for split-index mode
t2104: make sure split index mode is off for the version test
read-cache: force split index mode with GIT_TEST_SPLIT_INDEX
read-tree: note about dropping split-index mode or index version
read-tree: force split-index mode off on --index-output
rev-parse: add --shared-index-path to get shared index path
update-index --split-index: do not split if $GIT_DIR is read only
update-index: new options to enable/disable split index mode
split-index: strip pathname of on-disk replaced entries
split-index: do not invalidate cache-tree at read time
split-index: the reading part
split-index: the writing part
read-cache: mark updated entries for split index
read-cache: save deleted entries in split index
read-cache: mark new entries for split index
read-cache: split-index mode
read-cache: save index SHA-1 after reading
entry.c: update cache_changed if refresh_cache is set in checkout_entry()
cache-tree: mark istate->cache_changed on prime_cache_tree()
cache-tree: mark istate->cache_changed on cache tree update
...
MinGW and MSVC before 2010 don't define ELOOP, use EMLINK (aka "Too many
links") instead.
Signed-off-by: Karsten Blees <blees@dcon.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using `git format-patch --ignore-if-in-upstream` we are only
allowed to give a single revision range. In the next commit we will
want to add an additional exclusion revision in order to handle fork
points correctly, so convert `git-rebase--am` to use a symmetric
difference with `--cherry-pick --right-only`.
This does not change the result of the format-patch invocation, just how
we spell the arguments.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When adding alternate object directories, we try not to add the
directory of the current repository to avoid cycles. Unfortunately,
that test was broken, since it compared an absolute with a relative
path.
Signed-off-by: Ephrim Khong <dr.khong@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test creates some unrelated commits in two separate repositories,
and then fetches from one to the other. Since the commit creation
happens in a subshell, the first commit in each ends up with the
same test_tick value. When fetch-pack looks at the two root commits
"unrelated1" and "new-too", the exact sequence of ACKs is different
depending on which one it pulls out of the queue first.
With the current code, it happens to be "unrelated1" (though this is not
at all guaranteed by the prio_queue data structure, it is deterministic
for this particular sequence of input). We see the ready-ACK, and the
test succeeds.
With the stable queue, we reliably get "new-too" out (since it is our
local tip, it is added to the queue before we even talk to the remote).
We never see a ready-ACK, and the test fails due to the grep on the
TRACE_PACKET output at the end (the fetch itself succeeds as expected).
I'm really not quite clear on what's supposed to be going on in the
test. I can make it pass with this change.
git commit -m with some iso8859-1 encoded stuff is doomed to fail in MinGW,
because Windows don't let you pass encoded bytes to a process (CreateProcessW
always takes a UTF-16LE encoded string).
It is safe to pass the iso8859-1 message using a file or a pipe.
Thanks-to: Karsten Blees <blees@dcon.de>
Author: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Changes opendir/readdir to use Windows Unicode APIs and convert between
UTF-8/UTF-16.
Removes parameter checks that are already covered by xutftowcs_path. This
changes detection of ENAMETOOLONG from MAX_PATH - 2 to MAX_PATH (matching
is_dir_empty in mingw.c). If name + "/*" or the resulting absolute path is
too long, FindFirstFile fails and errno is set through err_win_to_posix.
Increases the size of dirent.d_name to accommodate the full
WIN32_FIND_DATA.cFileName converted to UTF-8 (UTF-16 to UTF-8 conversion
may grow by factor three in the worst case).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replaces Windows "ANSI" APIs dealing with file- or path names with their
Unicode equivalent, adding UTF-8/UTF-16LE conversion as necessary.
The dirent API (opendir/readdir/closedir) is updated in a separate commit.
Adds trivial wrappers for access, chmod and chdir.
Adds wrapper for mktemp (needed for both mkstemp and mkdtemp).
The simplest way to convert a repository with legacy-encoded (e.g. Cp1252)
file names to UTF-8 ist to checkout with an old msysgit version and
"git add --all & git commit" with the new version.
Includes a fix for bug reported by John Chen:
On Windows XP (not Win7), directories cannot be deleted while a find handle
is open, causing "Deletion of directory '...' failed. Should I try again?"
prompts.
Prior to this commit, these failures were silently ignored due to
strbuf_free in is_dir_empty resetting GetLastError to ERROR_SUCCESS.
Close the find handle in is_dir_empty so that git doesn't block deletion
of the directory even after all other applications have released it.
Reported-by: John Chen <john0312@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are traversing to find merge bases, we keep our
usual commit_list of commits to process, sorted by their
commit timestamp. As we add each parent to the list, we have
to spend "O(width of history)" to do the insertion, where
the width of history is the number of simultaneous lines of
development.
If we instead use a heap-based priority queue, we can do
these insertions in "O(log width)" time. This provides minor
speedups to merge-base calculations (timings in linux.git,
warm cache, best-of-five):
[before]
$ git merge-base HEAD v2.6.12
real 0m3.251s
user 0m3.148s
sys 0m0.104s
[after]
$ git merge-base HEAD v2.6.12
real 0m3.234s
user 0m3.108s
sys 0m0.128s
That's only an 0.5% speedup, but it does help protect us
against pathological cases.
While we are munging the "interesting" function, we also
take the opportunity to give it a more descriptive name, and
convert the return value to an int (we returned the first
interesting commit, but nobody ever looked at it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If two items are added to a prio_queue and compare equal,
they currently come out in an apparently random order (this
order is deterministic for a particular sequence of
insertions and removals, but does not necessarily match the
insertion order). This makes it unlike using a date-ordered
commit_list, which is one of the main types we would like to
replace with it (because prio_queue does not suffer from
O(n) insertions).
We can make the priority queue stable by keeping an
insertion counter for each element, and using it to break
ties. This does increase the memory usage of the structure
(one int per element), but in practice it does not seem to
affect runtime. A best-of-five "git rev-list --topo-order"
on linux.git showed less than 1% difference (well within the
run-to-run noise).
In an ideal world, we would offer both stable and unstable
priority queues (the latter to try to maximize performance).
However, given the lack of a measurable performance
difference, it is not worth the extra code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When manipulating the priority queue's heap, we frequently
have to compare and swap heap entries. As we are storing
only void pointers right now, this is quite easy to do
inline in a few lines. However, when we start using a more
complicated heap entry in a future patch, that will get
longer. Factoring out these operations lets us make future
changes in one place. It also makes the code a little
shorter and more readable.
Note that we actually accept indices into the queue array
instead of pointers. This is slightly less flexible than
passing pointers-to-pointers (we could not swap items from
unrelated arrays, but we would not want to), but will make
further refactoring simpler (and lets us avoid repeating
"queue->array" at each callsite, which led to some long
lines).
And finally, note that we are cleaning up an accidental use
of a "struct commit" pointer to hold a temporary entry
during swap. Even though we currently only use this code for
commits, it is supposed to be type-agnostic. In practice
this didn't matter anyway because we never dereferenced the
commit pointer (and on most systems, the pointer values
themselves are interchangeable between types).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/verify-commit.c was added in commit d07b00b ("verify-commit:
scriptable commit signature verification", 2014-06-23), update
.gitignore to ignore the generated file.
Signed-off-by: Øyvind A. Holm <sunny@sunbase.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a segfault in git-status with long paths on Windows,
where PATH_MAX is only 260.
This also fixes the problem of silently ignoring .gitignore if the
full path exceeds PATH_MAX. Now add_excludes_from_file() will report
if it gets ENAMETOOLONG.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no actual nested struct here. Move it out for clarity.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some code paths (e.g. giving "add -i" to prepare the contents to
be committed interactively inside "commit -p") where a caller takes
a lock, writes the new content, give chance for others to use it
while still holding the lock, and then releases the lock when all is
done. As an extension, allow the caller to re-update an already
closed file while still holding the lock (i.e. not yet committed) by
re-opening the file, to be followed by updating the contents and
then by the usual close_lock_file() or commit_lock_file().
This is necessary if we want to add code to rebuild the cache-tree
and write the resulting index out after "add -i" returns the control
to "commit -p", for example.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During the commit process, update the cache-tree. Write this updated
cache-tree so that it's ready for subsequent commands.
Add test code which demonstrates that git commit now writes the cache
tree. Make all tests test the entire cache-tree, not just the root
level.
Signed-off-by: David Turner <dturner@twitter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the revert command updates the work tree as expected (for
submodule changes which don't result in conflicts). Add a helper function
to first revert the checked out target commit to make the last revert
produce the to-be-tested work tree.
Set the KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT and
KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR switches to
document that revert has the similar failures.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the stash apply command updates the work tree as expected for
changes which don't result in conflicts. To make that work add a helper
function that uses read-tree to apply the changes of the target commit
to the work tree, then stashes these changes and at last applies that
stash.
Implement the KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES switch
and reuse two other already present switches to expect the known
failure that stash does ignore submodule changes.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the am command updates the work tree as expected (for submodule
changes which don't result in conflicts). To make that work add two
helper functions that use format-patch to create the input for am.
Add the KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES
switch to expect the known failure that --no-ff merges attempt to merge
the new files in the former submodule directory with those of the removed
submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the cherry-pick command updates the work tree as expected (for
submodule changes which don't result in conflicts).
Set KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES
and KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR to
document that cherry-pick has the same --no-ff known failures merge has.
Implement the KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT switch to expect
the known failure that while cherry picking just a SHA-1 update for an
ignored submodule the commit incorrectly fails with "The previous
cherry-pick is now empty, possibly due to conflict resolution.".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the pull command updates the work tree as expected (for
submodule changes which don't result in conflicts) when used without
arguments or with the '--ff', '--ff-only' and '--no-ff' flag each. Add
helper functions to reset the branch to be updated to to the current
HEAD so that pull is doing the transition from HEAD to the given branch.
Set KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES
and KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR to
document that pull has the same --no-ff known failures merge has.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the rebase command updates the work tree as expected for
changes which don't result in conflicts. To make that work add two
helper functions that add a commit only touching files and then
revert it. This allows to rebase the target commit over these two
and to compare the result.
Set KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR to
document that "replace directory with submodule" fails for an
interactive rebase because a directory "sub1" already exists.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the merge command updates the work tree as expected (for
submodule changes which don't result in conflicts) when used without
arguments or with the '--ff', '--ff-only' and '--no-ff' flag.
Implement the KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR
switch to expect the known failure that --no-ff merges do not create the
empty submodule directory.
The KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES
switch is also implemented to expect the known failure that --no-ff
merges attempt to merge the new files in the former submodule directory
with those of the removed submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the bisect command updates the work tree as expected. To make
that work with the new submodule test framework a git_bisect helper
function is added. This adds a commit after the one given to be switched
to and makes that one the bad commit. The starting point is then given to
bisect as the good commit which makes bisect change the work tree to the
commit in between, which is the commit given.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the reset command updates the work tree as expected for changes
with '--keep', '--merge' (for changes which don't result in conflicts) and
'--hard'.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the read-tree command updates the work tree as expected for
changes which don't result in conflicts with the '-m' and '--reset' flag.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the apply command updates the work tree as expected for the
'--index' and the '--3way' options (for submodule changes which don't
result in conflicts).
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the checkout command updates the work tree as expected with
and without the '-f' flag.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add this test library to simplify covering all combinations of submodule
update scenarios without having to add those to a test of each work tree
manipulating command over and over again.
The functions test_submodule_switch() and test_submodule_forced_switch()
are intended to be called from a test script with a single argument. This
argument is either a work tree manipulating command (including any command
line options) or a function (when more than a single git command is needed
to switch work trees from the current HEAD to another commit). This
command (or function) is passed a target branch as argument. The two new
functions check that each submodule transition is handled as expected,
which currently means that submodule work trees are not affected until
"git submodule update" is called. The "forced" variant is for commands
using their '-f' or '--hard' option and expects them to overwrite local
modifications as a result. Each of these two functions contains 14
tests_expect_* calls.
Calling one of these test functions the first time creates a repository
named "submodule_update_repo". At first it contains two files, then a
single submodule is added in another commit followed by commits covering
all relevant submodule modifications. This repository is newly cloned into
the "submodule_update" for each test_expect_* to avoid interference
between different parts of the test functions (some to-be-tested commands
also manipulate refs along with the work tree, e.g. "git reset").
Follow-up commits will then call these two test functions for all work
tree manipulating commands (with a combination of all their options
relevant to what they do with the work tree) making sure they work as
expected. Later this test library will be extended to cover merges
resulting in conflicts too. Also it is intended to be easily extendable
for the recursive update functionality, where even more combinations of
submodule modifications have to be tested for.
This version documents two bugs in current Git with expected failures:
*) When a submodule is replaced with a tracked file of the same name the
submodule work tree including any local modifications (and even the
whole history if it uses a .git directory instead of a gitfile!) is
silently removed.
*) Forced work tree updates happily manipulate files in the directory of a
submodule that has just been removed in the superproject (but is of
course still present in the work tree due to the way submodules are
currently handled). This becomes dangerous when files in the submodule
directory are overwritten by files from the new superproject commit, as
any modifications to the submodule files will be lost) and is expected
to also destroy history in the - admittedly unlikely case - the new
commit adds a file named ".git" to the submodule directory.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update ref_transaction_update() do some basic error checking and return
non-zero on error. Update all callers to check ref_transaction_update() for
error. There are currently no conditions in _update that will return error but
there will be in the future. Add an err argument that will be updated on
failure. In future patches we will start doing both locking and checking
for name conflicts in _update instead of _commit at which time this function
will start returning errors for these conditions.
Also check for BUGs during update and die(BUG:...) if we are calling
_update with have_old but the old_sha1 pointer is NULL.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Since all callers now use QUIET_ON_ERR we no longer need to provide an onerr
argument any more. Remove the onerr argument from the ref_transaction_commit
signature.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Call ref_transaction_commit with QUIET_ON_ERR and use the strbuf that is
returned to print a log message if/after the transaction fails.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Change update_ref_write to also update an error strbuf on failure.
This makes the error available to ref_transaction_commit callers if the
transaction failed due to update_ref_sha1/write_ref_sha1 failures.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Make ref_update_reject_duplicates return any error that occurs through a
new strbuf argument. This means that when a transaction commit fails in
this function we will now be able to pass a helpful error message back to the
caller.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Making errno from write_ref_sha1() meaningful, which should fix
* a bug in "git checkout -b" where it prints strerror(errno)
despite errno possibly being zero or clobbered
* a bug in "git fetch"'s s_update_ref, which trusts the result of an
errno == ENOTDIR check to detect D/F conflicts
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Making errno when returning from resolve_ref_unsafe() meaningful,
which should fix
* a bug in lock_ref_sha1_basic, where it assumes EISDIR
means it failed due to a directory being in the way
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Making errno when returning from commit_packed_refs() meaningful,
which should fix
* a bug in "git clone" where it prints strerror(errno) based on
errno, despite errno possibly being zero and potentially having
been clobbered by that point
* the same kind of bug in "git pack-refs"
and prepares for repack_without_refs() to get a meaningful
error message when commit_packed_refs() fails without falling into
the same bug.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Making errno when returning from remove_empty_directories() more
obviously meaningful, which should provide some peace of mind for
people auditing lock_ref_sha1_basic.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Making errno when returning from verify_lock() meaningful, which
should almost but not completely fix
* a bug in "git fetch"'s s_update_ref, which trusts the result of an
errno == ENOTDIR check to detect D/F conflicts
ENOTDIR makes sense as a sign that a file was in the way of a
directory we wanted to create. Should "git fetch" also look for
ENOTEMPTY or EEXIST to catch cases where a directory was in the way
of a file to be created?
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Update repack_without_refs to take an err argument and update it if there
is a failure. Pass the err variable from ref_transaction_commit to this
function so that callers can print a meaningful error message if _commit
fails due to this function.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Making errno when returning from lock_file() meaningful, which should
fix
* an existing almost-bug in lock_ref_sha1_basic where it assumes
errno==ENOENT is meaningful and could waste some work on retries
* an existing bug in repack_without_refs where it prints
strerror(errno) and picks advice based on errno, despite errno
potentially being zero and potentially having been clobbered by
that point
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Introducing a new unable_to_lock_message helper, which has nicer
semantics than unable_to_lock_error and cleans up lockfile.c a little.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Add a strbuf argument to _commit so that we can pass an error string back to
the caller. So that we can do error logging from the caller instead of from
_commit.
Longer term plan is to first convert all callers to use onerr==QUIET_ON_ERR
and craft any log messages from the callers themselves and finally remove the
onerr argument completely.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Allow ref_transaction_free(NULL) as a no-op. This makes ref_transaction_free
easier to use and more similar to plain 'free'.
In particular, it lets us rollback unconditionally as part of cleanup code
after setting 'transaction = NULL' if a transaction has been committed or
rolled back already.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
ref_transaction_create|delete|update has no need to modify the sha1
arguments passed to it so it should use const unsigned char* instead
of unsigned char*.
Some functions, such as fast_forward_to(), already have its old/new
sha1 arguments as consts. This function will at some point need to
use ref_transaction_update() in which case this change is required.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
We do not yet need both a rollback and a free function for transactions.
Remove ref_transaction_rollback and use ref_transaction_free instead.
At a later stage we may reintroduce a rollback function if we want to start
adding reusable transactions and similar.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Calculating duration from a single uint64_t is simpler than from a struct
timeval. Change throughput measurement from gettimeofday() to
getnanotime().
Also calculate misec only if needed, and change integer division to integer
multiplication + shift, which should be slightly faster.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calculating duration from a single uint64_t is simpler than from a struct
timeval. Change performance measurement for 'advice.statusuoption' from
gettimeofday() to getnanotime().
Also initialize t_begin to prevent uninitialized variable warning.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use trace_performance to measure and print execution time and command line
arguments of the entire main() function. In constrast to the shell's 'time'
utility, which measures total time of the parent process, this logs all
involved git commands recursively. This is particularly useful to debug
performance issues of scripted commands (i.e. which git commands were
called with which parameters, and how long did they execute).
Due to git's deliberate use of exit(), the implementation uses an atexit
routine rather than just adding trace_performance_since() at the end of
main().
Usage example: > GIT_TRACE_PERFORMANCE=~/git-trace.log git stash list
Creates a log file like this:
23:57:38.638765 trace.c:405 performance: 0.000310107 s: git command: 'git' 'rev-parse' '--git-dir'
23:57:38.644387 trace.c:405 performance: 0.000261759 s: git command: 'git' 'rev-parse' '--show-toplevel'
23:57:38.646207 trace.c:405 performance: 0.000304468 s: git command: 'git' 'config' '--get-colorbool' 'color.interactive'
23:57:38.648491 trace.c:405 performance: 0.000241667 s: git command: 'git' 'config' '--get-color' 'color.interactive.help' 'red bold'
23:57:38.650465 trace.c:405 performance: 0.000243063 s: git command: 'git' 'config' '--get-color' '' 'reset'
23:57:38.654850 trace.c:405 performance: 0.025126313 s: git command: 'git' 'stash' 'list'
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add trace_performance and trace_performance_since macros that print a
duration and an optional printf-formatted text to the file specified in
environment variable GIT_TRACE_PERFORMANCE.
These macros, in conjunction with getnanotime(), are intended to simplify
performance measurements from within the application (i.e. profiling via
manual instrumentation, rather than using an external profiling tool).
Unless enabled via GIT_TRACE_PERFORMANCE, these macros have no noticeable
impact on performance, so that test code for well known time killers may
be shipped in release builds. Alternatively, a developer could provide an
additional performance patch (not meant for master) that allows reviewers
to reproduce performance tests more easily, e.g. on other platforms or
using their own repositories.
Usage examples:
Simple use case (measure one code section):
uint64_t start = getnanotime();
/* code section to measure */
trace_performance_since(start, "foobar");
Complex use case (measure repetitive code sections):
uint64_t t = 0;
for (;;) {
/* ignore */
t -= getnanotime();
/* code section to measure */
t += getnanotime();
/* ignore */
}
trace_performance(t, "frotz");
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a getnanotime() function that returns nanoseconds since 01/01/1970 as
unsigned 64-bit integer (i.e. overflows in july 2554). This is easier to
work with than e.g. struct timeval or struct timespec. Basing the timer on
the epoch allows using the results with other time-related APIs.
To simplify adaption to different platforms, split the implementation into
a common getnanotime() and a platform-specific highres_nanos() function.
The common getnanotime() function handles errors, falling back to
gettimeofday() if highres_nanos() isn't implemented or doesn't work.
getnanotime() is also responsible for normalizing to the epoch. The offset
to the system clock is calculated only once on initialization, i.e.
manually setting the system clock has no impact on the timer (except if
the fallback gettimeofday() is in use). Git processes are typically short
lived, so we don't need to handle clock drift.
The highres_nanos() function returns monotonically increasing nanoseconds
relative to some arbitrary point in time (e.g. system boot), or 0 on
failure. Providing platform-specific implementations should be relatively
easy, e.g. adapting to clock_gettime() as defined by the POSIX realtime
extensions is seven lines of code.
This version includes highres_nanos() implementations for:
* Linux: using clock_gettime(CLOCK_MONOTONIC)
* Windows: using QueryPerformanceCounter()
Todo:
* enable clock_gettime() on more platforms
* add Mac OSX version, e.g. using mach_absolute_time + mach_timebase_info
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is useful to see where trace output came from.
Add 'const char *file, int line' parameters to the printing functions and
rename them to *_fl.
Add trace_printf* and trace_strbuf macros resolving to the *_fl functions
and let the preprocessor fill in __FILE__ and __LINE__.
As the trace_printf* functions take a variable number of arguments, this
requires variadic macros (i.e. '#define foo(...) foo_impl(__VA_ARGS__)'.
Though part of C99, it is unclear whether older compilers support this.
Thus keep the old functions and only enable variadic macros for GNUC and
MSVC 2005+ (_MSC_VER 1400). This has the nice side effect that the old
C-style declarations serve as documentation how the macros are to be used.
Print 'file:line ' as prefix to each trace line. Align the remaining trace
output at column 40 to accommodate 18 char file names + 4 digit line
number (currently there are 30 *.c files of length 18 and just 11 of 19).
Trace output from longer source files (e.g. builtin/receive-pack.c) will
not be aligned.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No functional changes, just move stuff around so that the next patch isn't
that ugly...
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is useful to tell apart trace output of separate test runs.
It can also be used for basic, coarse-grained performance analysis. Note
that the accuracy is tainted by writing to the trace file, and you have to
calculate the deltas yourself (which is next to impossible if multiple
threads or processes are involved).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some unit-tests use trace output to verify internal state, and unstable
output such as timestamps and line numbers are not useful there.
Disable additional trace output if GIT_TRACE_BARE is set.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To be able to add a common prefix or suffix to all trace output (e.g.
a timestamp or file:line of the caller), factor out common setup and
cleanup tasks of the trace* functions.
When adding a common prefix, it makes sense that the output of each trace
call starts on a new line. Add '\n' in case the caller forgot.
Note that this explicitly limits trace output to line-by-line, it is no
longer possible to trace-print just part of a line. Until now, this was
just an implicit assumption (trace-printing part of a line worked, but
messed up the trace file if multiple threads or processes were involved).
Thread-safety / inter-process-safety is also the reason why we need to do
the prefixing and suffixing in memory rather than issuing multiple write()
calls. Write_or_whine_pipe() / xwrite() is atomic unless the size exceeds
MAX_IO_SIZE (8MB, see wrapper.c). In case of trace_strbuf, this costs an
additional string copy (which should be irrelevant for performance in light
of actual file IO).
While we're at it, rename trace_strbuf's 'buf' argument, which suggests
that the function is modifying the buffer. Trace_strbuf() currently is the
only trace API that can print arbitrary binary data (without barfing on
'%' or stopping at '\0'), so 'data' seems more appropriate.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes GIT_TRACE_PACK_ACCESS functionality as follows:
* supports the same options as GIT_TRACE (e.g. printing to stderr)
* no longer supports relative paths
* appends to the trace file rather than overwriting
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Separate GIT_TRACE description into what it prints and how to configure
where trace output is printed to. Change other GIT_TRACE_* descriptions to
refer to GIT_TRACE.
Add descriptions for GIT_TRACE_SETUP and GIT_TRACE_SHALLOW.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The trace API currently rechecks the environment variable and reopens the
trace file on every API call. This has the ugly side effect that errors
(e.g. file cannot be opened, or the user specified a relative path) are
also reported on every call. Performance can be improved by about factor
three by remembering the environment state and keeping the file open.
Replace the 'const char *key' parameter in the API with a pointer to a
'struct trace_key' that bundles the environment variable name with
additional, trace-internal state. Change the call sites of these APIs to
use a static 'struct trace_key' instead of a string constant.
In trace.c::get_trace_fd(), save and reuse the file descriptor in 'struct
trace_key'.
Add a 'trace_disable()' API, so that packet_trace() can cleanly disable
tracing when it encounters packed data (instead of using unsetenv()).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generally want to avoid lookup_unknown_object, because it
results in allocating more memory for the object than may be
strictly necessary.
In this case, it is used to check whether we have an
already-parsed object before calling parse_object, to save
us from reading the object from disk. Using lookup_object
would be fine for that purpose, but we can take it a step
further. Since this code was written, parse_object already
learned the "check lookup_object" optimization, so we can
simply call parse_object directly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of the "index" field of struct commit is that
every allocated commit would have one. It is supposed to be
an invariant that whenever object->type is set to
OBJ_COMMIT, we have a unique index.
Commit 969eba6 (commit: push commit_index update into
alloc_commit_node, 2014-06-10) covered this case for
newly-allocated commits. However, we may also allocate an
"unknown" object via lookup_unknown_object, and only later
convert it to a commit. We must make sure that we set the
commit index when we switch the type field.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We keep a static counter to set the commit index on newly
allocated objects. However, since we also need to set the
index on any_objects which are converted to commits, let's
make the counter available as a public function.
While we're moving it, let's make sure the counter is
allocated as an unsigned integer to match the index field in
"struct commit".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call lookup_commit, lookup_tree, etc, the logic goes
something like:
1. Look for an existing object struct. If we don't have
one, allocate and return a new one.
2. Double check that any object we have is the expected
type (and complain and return NULL otherwise).
3. Convert an object with type OBJ_NONE (from a prior
call to lookup_unknown_object) to the expected type.
We can encapsulate steps 2 and 3 in a helper function which
checks whether we have the expected object type, converts
OBJ_NONE as appropriate, and returns the object.
Not only does this shorten the code, but it also provides
one central location for converting OBJ_NONE objects into
objects of other types. Future patches will use that to
enforce type-specific invariants.
Since this is a refactoring, we would want it to behave
exactly as the current code. It takes a little reasoning to
see that this is the case:
- for lookup_{commit,tree,etc} functions, we are just
pulling steps 2 and 3 into a function that does the same
thing.
- for the call in peel_object, we currently only do step 3
(but we want to consolidate it with the others, as
mentioned above). However, step 2 is a noop here, as the
surrounding conditional makes sure we have OBJ_NONE
(which we want to keep to avoid an extraneous call to
sha1_object_info).
- for the call in lookup_commit_reference_gently, we are
currently doing step 2 but not step 3. However, step 3
is a noop here. The object we got will have just come
from deref_tag, which must have figured out the type for
each object in order to know when to stop peeling.
Therefore the type will never be OBJ_NONE.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only way that "obj" can be non-NULL is if it came from
one of the lookup_* functions. These functions always ensure
that the object has the expected type (and return NULL
otherwise), so there is no need for us to set the type.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "struct object" type implements basic object
polymorphism. Individual instances are allocated as
concrete types (or as a union type that can store any
object), and a "struct object *" can be cast into its real
type after examining its "type" enum. This means it is
dangerous to have a type field that does not match the
allocation (e.g., setting the type field of a "struct blob"
to "OBJ_COMMIT" would mean that a reader might read past the
allocated memory).
In most of the current code this is not a problem; the first
thing we do after allocating an object is usually to set its
type field by passing it to create_object. However, the
virtual commits we create in merge-recursive.c do not ever
get their type set. This does not seem to have caused
problems in practice, though (presumably because we always
pass around a "struct commit" pointer and never even look at
the type).
We can fix this oversight and also make it harder for future
code to get it wrong by setting the type directly in the
object allocation functions.
This will also make it easier to fix problems with commit
index allocation, as we know that any object allocated by
alloc_commit_node will meet the invariant that an object
with an OBJ_COMMIT type field will have a unique index
number.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because the allocator functions for tree, blobs, etc are all
very similar, we originally used a macro to avoid repeating
ourselves. Since the prior commit, though, the heavy lifting
is done by an inline helper function. The macro does still
save us a few lines, but at some readability cost. It
obfuscates the function definitions (and makes them hard to
find via grep).
Much worse, though, is the fact that it isn't used
consistently for all allocators. Somebody coming later may
be tempted to modify DEFINE_ALLOCATOR, but they would miss
alloc_commit_node, which is treated specially.
Let's just drop the macro and write everything out
explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to encapsulate the setting of the unique commit index, commit
969eba63 ("commit: push commit_index update into alloc_commit_node",
10-06-2014) introduced a (logically private) intermediary allocator
function. However, this function (alloc_raw_commit_node()) was declared
as a public function, which undermines its entire purpose.
Introduce an inline function, alloc_node(), which implements the main
logic of the allocator used by DEFINE_ALLOCATOR, and redefine the macro
in terms of the new function. In addition, use the new function in the
implementation of the alloc_commit_node() allocator, rather than the
intermediary allocator, which can now be removed.
Noticed by sparse ("symbol 'alloc_raw_commit_node' was not declared.
Should it be static?").
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename cache_def_free to cache_def_clear as it doesn't free the struct
cache_def, but just clears its content.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --sort tests should use the better format for >expect to maintain
indenting and ensure that no substitution is occurring. This makes
parsing and understanding the tests a bit easier.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests to confirm that invalidation of subdirectories neither over-
nor under-invalidates.
Signed-off-by: David Turner <dturner@twitter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fsck_commit_buffer() checks that the number of items in the parents
list of a commit matches the number of parent lines in its buffer or --
if a graft is used -- the number of parents in that graft. Simplify
the code by using commit_list_count() instead of counting by hand.
Also use different variables for the number of lines and the number of
list items, making it easier to compare them.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Build the commit_list of parents by calling commit_list_append() twice
instead of allocating and linking the items by hand. This makes the
code shorter and simpler. Rename the commit_list from parent to parents
(plural) while at it because there are two of them.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only the two targets "test-lint-duplicates" and "test-lint-executable" are
currently executed when running the test target. This was done on purpose
when the TEST_LINT variable was added in 81127d74 to avoid twisted shell
scripting by developers only to avoid false positives that might result
from the rather simple minded tests, e.g. test-lint-shell-syntax. But it
looks like it might be better to include all lint tests to help developers
to detect non portable shell constructs before the patch is sent to the
list and reviewed there.
Change the TEST_LINT variable to run all lint test unless the TEST_LINT
variable is overridden. If we hit false positives more often than helping
developers to avoid non-portable code (or add less accurate or slow tests
later) we could still fall back to exclude them like 81127d74 proposed.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently only the "t[0-9][0-9][0-9][0-9]-*.sh" scripts are tested for
shell incompatibilities using the check-non-portable-shell.pl script. This
makes it easy to miss non-POSIX constructs added to one of the t/*lib*.sh
helper scripts, as they aren't automatically detected.
Fix that by adding a THELPERS variable containing all shell scripts that
aren't tests and add these to the "test-lint-shell-syntax" target too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes to a topic that is already in 'master'.
* dt/refs-check-refname-component-sse-fix:
refs: fix valgrind suppression file
refs.c: handle REFNAME_REFSPEC_PATTERN at end of page
Add 'verify-commit' to be used in a way similar to 'verify-tag' is
used. Further work on verifying the mergetags might be needed.
* mg/verify-commit:
t7510: test verify-commit
t7510: exit for loop with test result
verify-commit: scriptable commit signature verification
gpg-interface: provide access to the payload
gpg-interface: provide clear helper for struct signature_check
"git clone -b brefs/tags/bar" would have mistakenly thought we were
following a single tag, even though it was a name of the branch,
because it incorrectly used strstr().
* jc/fix-clone-single-starting-at-a-tag:
builtin/clone.c: detect a clone starting at a tag correctly
We can make the parsing of the --sort parameter a bit more
readable by having skip_prefix keep our pointer up to date.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we encounter an error in remote-curl, we generally just
report it to stderr. There is no need for the user to care
that the "could not connect to server" error was generated
by git-remote-https rather than a function in the parent
git-fetch process.
However, when the error is in the protocol between git and
the helper, it makes sense to clearly identify which side is
complaining. These cases shouldn't ever happen, but when
they do, we can make them less confusing by being more
verbose.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We usually prefix our error messages with "error: ", but
many error messages from remote-curl are simply printed with
fprintf. This can make the output a little harder to read
(especially because such message may be intermingled with
errors from the parent git process).
There is no reason to avoid error(), as we are already
calling it many places (in addition to libgit.a functions
which use it).
While we're adjusting the messages, we can also drop the
capitalization which makes them unlike other git error
messages.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parent git process is supposed to send us an empty line
to indicate that the conversation is over. However, the
parent process may die() if there is a problem with the
operation (e.g., we try to fetch a ref that does not exist).
In this case, it produces a useful message, but then
remote-curl _also_ produces an unhelpful message:
$ git pull origin matser
fatal: couldn't find remote ref matser
Unexpected end of command stream
The "right" way to fix this is to teach the parent git to
always cleanly close the connection to the helper, letting
it know that we are done. Implementing that is rather
clunky, though, as it would involve either replacing die()
operations with returning errors up the stack (until we
disconnect the transport), or adding an atexit handler to
clean up any transport helpers left open.
It's much simpler to just suppress the EOF message in
remote-curl. It was not added to address any real-world
situation in the first place, but rather a "we should
probably report unexpected things" suggestion[1].
It is the parent git which drives the operation, and whose
exit value actually matters. If the parent dies, then the
helper has no need to complain (except as a debugging aid).
In the off chance that the pipe is closed without the parent
dying, it can still notice the non-zero exit code.
[1] http://article.gmane.org/gmane.comp.version-control.git/176036
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/pretty-G-format-fixes:
move "%G" format test from t7510 to t6006
pretty: avoid reading past end-of-string with "%G"
t7510: check %G* pretty-format output
t7510: test a commit signed by an unknown key
t7510: use consistent &&-chains in loop
t7510: stop referring to master in later tests
* jk/xstrfmt:
setup_git_env(): introduce git_path_from_env() helper
unique_path: fix unlikely heap overflow
walker_fetch: fix minor memory leak
merge: use argv_array when spawning merge strategy
sequencer: use argv_array_pushf
setup_git_env: use git_pathdup instead of xmalloc + sprintf
use xstrfmt to replace xmalloc + strcpy/strcat
use xstrfmt to replace xmalloc + sprintf
use xstrdup instead of xmalloc + strcpy
use xstrfmt in favor of manual size calculations
strbuf: add xstrfmt helper
* jk/skip-prefix:
http-push: refactor parsing of remote object names
imap-send: use skip_prefix instead of using magic numbers
use skip_prefix to avoid repeated calculations
git: avoid magic number with skip_prefix
fetch-pack: refactor parsing in get_ack
fast-import: refactor parsing of spaces
stat_opt: check extra strlen call
daemon: use skip_prefix to avoid magic numbers
fast-import: use skip_prefix for parsing input
use skip_prefix to avoid repeating strings
use skip_prefix to avoid magic numbers
transport-helper: avoid reading past end-of-string
fast-import: fix read of uninitialized argv memory
apply: use skip_prefix instead of raw addition
refactor skip_prefix to return a boolean
avoid using skip_prefix as a boolean
daemon: mark some strings as const
parse_diff_color_slot: drop ofs parameter
Add all of the ways in which check_refname_format violates valgrind's
expectations to the valgrind suppression file; remove an assumption about
the call chain of check_refname_format from same.
Signed-off-by: David Turner <dturner@twitter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Historically there are 3 different parameters controlling how line endings
are handled by Git:
- core.autocrlf
- core.eol
- the "text" attribute in .gitattributes
There are different types of content:
- (1) Files with only LF
- (2) Files with only CRLF
- (3) Files with mixed LF and CRLF
- (4) Files with LF and/or CRLF with CR not followed by LF
- (5) Files which are binary (e.g. have NUL bytes)
Recently the question came up, how files with mixed EOLs are handled by Git
(and libgit2) when they are checked out and core.autocrlf=true.
See
http://git.661346.n2.nabble.com/The-different-EOL-behavior-between-libgit2-based-software-and-official-Git-td7613670.html#a7613801
Add the EXPENSIVE t0027-auto-crlf.sh to test all combination of files
and parameters for both "git add/commit" and "git checkout".
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current test files are named one, two and three.
Make it clearer what the tests do and rename them into
LFonly, CRLFonly and LFwithNUL.
After the renaming we can see easier that we may want more test cases
for 2 types of files:
- files which have mixed LF and CRLF line endings,
- files which have mixed LF and CR line endings.
See commit fd6cce9e, "Add per-repository eol normalization" and
"the new safer autocrlf handling" in convert.c
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Profile feedback always failed for me with -jN. The problem
was that there was no implicit ordering between the profile generate
stage and the profile use stage. So some objects in the later stage
would be linked with profile generate objects, and fail due
to the missing -lgcov.
This adds a new profile target that implicitely enforces the
correct ordering by using submakes. Plus a profile-install target
to also install. This is also nicer to type that PROFILE=...
Plus I always run the performance test suite now for the full
profile run.
In addition I also added a profile-fast / profile-fast-install
target the only runs the performance test suite instead of the
whole test suite. This significantly speeds up the profile build,
which was totally dominated by test suite run time. However
it may have less coverage of course.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not treat known-invalid trees as errors even when their subtree_nr is
incorrect. Because git already knows that these trees are invalid,
an incorrect subtree_nr will not cause problems.
Add a couple of comments.
Signed-off-by: David Turner <dturner@twitter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the same way as there is for_each_ref() to iterate on refs,
for_each_mergetag() allows the caller to iterate on the mergetags of
a given commit. Use it to rewrite show_mergetag() used in "git log".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the whole directory of test files at once using git add instead of
calling git update-index on each of them and use git commit instead of
the plumbing commands write-tree, update-ref and commit-tree to build
the commit. This simplifies the code considerably.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Profile feedback sets -DNO_NORETURN, which causes the compat
header file to go into a default #else block. That #else
block defines away __attribute__(). Doing so causes all
kinds of problems with the Linux and gcc system headers:
in particular it makes the xmmintrin.h headers error out,
breaking the build.
Don't define away __attribute__ when __GNUC__ is set.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use BASIC_CFLAGS instead of CFLAGS to set up the profile feedback
option in the Makefile.
This allows still overriding CFLAGS on the make command line
without disabling profile feedback.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Interning short strings with high probability of duplicates can reduce the
memory footprint and speed up comparisons.
Add strintern() and memintern() APIs that use a hashmap to manage the pool
of unique, interned strings.
Note: strintern(getenv()) could be used to sanitize git's use of getenv(),
in case we ever encounter a platform where a call to getenv() invalidates
previous getenv() results (which is allowed by POSIX).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hashmap entries are typically looked up by just a key. The hashmap_get()
API expects an initialized entry structure instead, to support compound
keys. This flexibility is currently only needed by find_dir_entry() in
name-hash.c (and compat/win32/fscache.c in the msysgit fork). All other
(currently five) call sites of hashmap_get() have to set up a near emtpy
entry structure, resulting in duplicate code like this:
struct hashmap_entry keyentry;
hashmap_entry_init(&keyentry, hash(key));
return hashmap_get(map, &keyentry, key);
Add a hashmap_get_from_hash() API that allows hashmap lookups by just
specifying the key and its hash code, i.e.:
return hashmap_get_from_hash(map, hash(key), key);
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Copying the first bytes of a SHA1 is duplicated in six places,
however, the implications (the actual value would depend on the
endianness of the platform) is documented only once.
Add a properly documented API for this.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git checkout checks out a branch, create or update the
cache-tree so that subsequent operations are faster.
update_main_cache_tree learned a new flag, WRITE_TREE_REPAIR. When
WRITE_TREE_REPAIR is set, portions of the cache-tree which do not
correspond to existing tree objects are invalidated (and portions which
do are marked as valid). No new tree objects are created.
Signed-off-by: David Turner <dturner@twitter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git checkout' fails if a directory is longer than PATH_MAX, because the
lstat_cache in symlinks.c checks if the leading directory exists using
PATH_MAX-bounded string operations.
Remove the limitation by using strbuf instead.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a ref crosses a memory page boundary, we restart the parsing
at the beginning with the bytewise code. Pass the original flags
to that code, rather than the current flags.
Reported-By: Øyvind A. Holm <sunny@sunbase.org>
Signed-off-by: David Turner <dturner@twitter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase --skip" did not work well when it stopped due to a
conflict twice in a row.
* bc/fix-rebase-merge-skip:
rebase--merge: fix --skip with two conflicts in a row
Move "commit->buffer" out of the in-core commit object and keep
track of their lengths. Use this to optimize the code paths to
validate GPG signatures in commit objects.
* jk/commit-buffer-length:
reuse cached commit buffer when parsing signatures
commit: record buffer length in cache
commit: convert commit->buffer to a slab
commit-slab: provide a static initializer
use get_commit_buffer everywhere
convert logmsg_reencode to get_commit_buffer
use get_commit_buffer to avoid duplicate code
use get_cached_commit_buffer where appropriate
provide helpers to access the commit buffer
provide a helper to set the commit buffer
provide a helper to free commit buffer
sequencer: use logmsg_reencode in get_message
logmsg_reencode: return const buffer
do not create "struct commit" with xcalloc
commit: push commit_index update into alloc_commit_node
alloc: include any-object allocations in alloc_report
replace dangerous uses of strbuf_attach
commit_tree: take a pointer/len pair rather than a const strbuf
If 'current-file' does not contain LF at EOF, and change between
'base-file' and 'other-file' does not change any line close to EOF, the
3-way merge should not add LF to EOF. This is what 'diff3 -m' does, and
seems to be a reasonable expectation.
The change which introduced the behavior is cd1d61c44f. It always calls
function xdl_recs_copy() for sides with add_nl == 1. In fact, it looks
like the only case when this is needed is when 2 files are being
union-merged, and they do not have LF at EOF (strictly speaking, the
first of them).
Add tests:
* "merge without conflict (missing LF at EOF, away from change in the
other file)" and "merge does not add LF away of change", to demonstrate
the changed behavior.
* "conflict at EOF without LF resolved by --union", to verify that the
union-merge at the end inerts newline between versions.
* some more tests which I felt like not covering the functionality well
Signed-off-by: Max Kirillov <max@max630.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests "merge without conflict (missing LF at EOF" and "merge result
added missing LF" are meaningless - the first one is identical to
"merge without conflict" and the second compares results of those
identical tests, which are always same.
This has been so since their addition in ba1f5f3537. Probably "new4.txt"
was meant to be used instead of "new2.txt". Unfortunately, the current
merge-file breaks with new4 - conflict is reported. They also fail at
that revision if fixed.
Fix the file reference to "new4.txt" and mark the tests as failing -
they look like legitimate expectations, just not satisfied at time
being.
Signed-off-by: Max Kirillov <max@max630.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are reloading the list of packs, we check whether a
particular pack has been loaded. This is slightly tricky,
because we load packs based on the presence of their ".idx"
files, but record the name of the matching ".pack" file.
Therefore we want to compare their bases.
The existing code stripped off ".idx" from a file we found,
then compared that whole base length to strings containing
the ".pack" version. This meant we could end up comparing
bytes past what the ".pack" string contained, if the ".idx"
file name was much longer.
In practice, it worked OK because memcmp would end up seeing
a difference in the two strings and would return early
before hitting the full length. However, memcmp may
sometimes read extra bytes past a difference (e.g., because
it is comparing 64-bit words), or is even free to compare in
reverse order.
Furthermore, our memcmp made no guarantees that we matched
the whole pack name, up to ".pack". So "foo.idx" would match
"foo-bar.pack", which is wrong (but does not typically
happen, because our pack names have a fixed size).
We can fix both issues, avoid magic numbers, and document
that we expect to compare against a string with ".pack" by
using strip_suffix.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this code, we try to convert both "foo.idx" and "foo"
into "foo.pack". By stripping the suffix, we can avoid a
confusing use of strbuf_splice, and make it clear that both
cases are adding ".pack" to the end.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can almost get away with just calling "strip_suffix_mem"
on a strbuf's buf and len fields. But we also need to move
the NUL-terminator to satisfy strbuf's invariants. Let's
provide a convenience wrapper that handles this.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We also switch to using strbufs, which lets us avoid the
potentially dangerous combination of a manual malloc
followed by a strcpy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When stripping a suffix like:
if (ends_with(str, "foo"))
buf = xmemdupz(str, strlen(str) - 3);
we can instead use strip_suffix to avoid the constant 3,
which must match the literal "foo" (we sometimes use
strlen("foo") instead, but that means we are repeating
ourselves). The example above becomes:
if (strip_suffix(str, "foo", &len))
buf = xmemdupz(str, len);
This also saves a strlen(), since we calculate the string
length when detecting the suffix.
Note that in some cases we also switch from xstrndup to
xmemdupz, which saves a further strlen call.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two are almost the same function, with the exception
that has_extension only matches if there is content before
the suffix. So ends_with(".exe", ".exe") is true, but
has_extension would not be.
This distinction does not matter to any of the callers,
though, and we can just replace uses of has_extension with
ends_with. We prefer the "ends_with" name because it is more
generic, and there is nothing about the function that
requires it to be used for file extensions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ends_with function is essentially a simplified version
of strip_suffix, in which we throw away the stripped length.
Implementing it as an inline on top of strip_suffix has two
advantages:
1. We save a bit of duplicated code.
2. The suffix is typically a string literal, and we call
strlen on it. By making the function inline, many
compilers can replace the strlen call with a constant.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many callers of ends_with want to not only find out whether
a string has a suffix, but want to also strip it off. Doing
that separately has two minor problems:
1. We often run over the string twice (once to find
the suffix, and then once more to find its length to
subtract the suffix length).
2. We have to specify the suffix length again, which means
either a magic number, or repeating ourselves with
strlen("suffix").
Just as we have skip_prefix to avoid these cases with
starts_with, we can add a strip_suffix to avoid them with
ends_with.
Note that we add two forms of strip_suffix here: one that
takes a string, with the resulting length as an
out-parameter; and one that takes a pointer/length pair, and
reuses the length as an out-parameter. The latter is more
efficient when the caller already has the length (e.g., when
using strbufs), but it can be easy to confuse the two, as
they take the same number and types of parameters.
For that reason, the "mem" form puts its length parameter
next to the buffer (since they are a pair), and the string
form puts it at the end (since it is an out-parameter). The
compiler can notice when you get the order wrong, which
should help prevent writing one when you meant the other.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using strbuf to create a message string in case a path is
too long for our fixed-size buffer, replace that buffer with a strbuf
and thus get rid of the limitation.
Helped-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the ARRAY_SIZE macro to get the number
of elements in an array.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use argv_array_pushf for building the number string for the option
--summary-limit directly instead of using an intermediate buffer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using a PATH_MAX buffer, use argv_array for constructing the
environment for git submodule summary. This simplifies the code a bit
and removes the arbitrary length limit.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When many branches contain a commit, the branches used to be shown in
the form "A, B and many more", where A, B can be master of current
HEAD. But there are more which might be interesting to always know about.
For example, "origin/master".
The new option, visiblerefs, is stored in ~/.gitk. It contains a list
of references which are always shown before "and many more" if they
contain the commit. By default it is `{"master"}', which is compatible
with previous behavior.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
105b5d3f ("gitk: Use mktemp -d to avoid predictable temporary
directories") introduced a dependency on mkdtemp, which is not
available on Windows.
Use the original temporary directory behavior when mkdtemp fails.
This makes the code use mkdtemp when available and gracefully
fallback to the existing behavior when it is not available.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
* master~2:
gitk: Show staged submodules regardless of ignore config
gitk: Allow displaying time zones from author and commit dates timestamps
gitk: Switch to patch mode when searching for line origin
gitk: Replace SHA1 entry field on keyboard paste
l10n: Init Vietnamese translation
* git://repo.or.cz/git-gui:
git-gui: tolerate major version changes when comparing the git version
git-gui: show staged submodules regardless of ignore config
One of the purposes of "git replace --edit" is to help a
user repair objects which are malformed or corrupted.
Usually we pretty-print trees with "ls-tree", which is much
easier to work with than the raw binary data. However, some
forms of corruption break the tree-walker, in which case our
pretty-printing fails, rendering "--edit" useless for the
user.
This patch introduces a "--raw" option, which lets you edit
the binary data in these instances.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a little more verbose, but will make it easier to
make parts of our command-line conditional (without
resorting to magic numbers or lots of NULLs to get an
appropriately sized argv array).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a file descriptor is given to run_command via the
"in", "out", or "err" parameters, run_command takes
ownership. The descriptor will be closed in the parent
process whether the process is spawned successfully or not,
and closing it again is wrong.
In practice this has not caused problems, because we usually
close() right after start_command returns, meaning no other
code has opened a descriptor in the meantime. So we just get
EBADF and ignore it (rather than accidentally closing
somebody else's descriptor!).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some subcommands do not want to be aliased because of the side
effects that happens while the definitions of the aliases are looked
up from configuration system.
* nd/init-restore-env:
git potty: restore environments after alias expansion
Recent updates to "git repack" started to duplicate objects that
are in packfiles marked with .keep flag into the new packfile by
mistake.
* jk/repack-pack-keep-objects:
repack: s/write_bitmap/&s/ in code
repack: respect pack.writebitmaps
repack: do not accidentally pack kept objects by default
"Check the value of an environment and fall back to a known path
inside $GIT_DIR" is repeated a few times to determine the location
of the data store, the index and the graft file, but the return
value of getenv is not guaranteed to survive across further
invocations of setenv or even getenv.
Make sure to xstrdup() the value we receive from getenv(3), and
encapsulate the pattern into a helper function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mixes the "git verify-commit" tests in with the "git show
--show-signature" tests, to keep the tests more readable.
The tests already mix in the "call show" tests with the "verify" tests.
So in case of a test beakage, a '-v' run would be needed to reveal the
exact point of breakage anyway.
Additionally, test the actual output of "git verify-commit" and "git
show --show-signature" and compare to "git cat-file".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7510 uses for loops in a subshell, which need to make sure that the test
returns with the appropriate error code from within the loop.
Restructure the loops as the usual && chains with a single point of
"exit 1" at the end of the loop to make this clearer.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit signatures can be verified using "git show -s --show-signature"
or the "%G?" pretty format and parsing the output, which is well suited
for user inspection, but not for scripting.
Provide a command "verify-commit" which is analogous to "verify-tag": It
returns 0 for good signatures and non-zero otherwise, has the gpg output
on stderr and (optionally) the commit object on stdout, sans the
signature, just like "verify-tag" does.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In contrast to tag signatures, commit signatures are put into the
header, that is between the other header parts and commit messages.
Provide access to the commit content sans the signature, which is the
payload that is actually signed. Commit signature verification does the
parsing anyways, and callers may wish to act on or display the commit
object sans the signature.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The struct has been growing members whose malloced memory needs to be
freed. Do this with one helper function so that no malloced memory shall
be left unfreed.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jc/test-lazy-prereq' (early part):
t3419: drop unnecessary NOT_EXPENSIVE pseudo-prerequisite
t3302: drop unnecessary NOT_EXPENSIVE pseudo-prerequisite
t3302: do not chdir around in the primary test process
t3302: coding style updates
test: turn USR_BIN_TIME into a lazy prerequisite
test: turn EXPENSIVE into a lazy prerequisite
* jc/fetch-pull-refmap:
docs: Explain the purpose of fetch's and pull's <refspec> parameter.
fetch: allow explicit --refmap to override configuration
fetch doc: add a section on configured remote-tracking branches
fetch doc: remove "short-cut" section
fetch doc: update refspec format description
fetch doc: on pulling multiple refspecs
fetch doc: remove notes on outdated "mixed layout"
fetch doc: update note on '+' in front of the refspec
fetch doc: move FETCH_HEAD material lower and add an example
fetch doc: update introductory part for clarity
* mt/send-email-cover-to-cc:
t9001: avoid non-portable '\n' with sed
test/send-email: to-cover, cc-cover tests
git-send-email: two new options: to-cover, cc-cover
"git log -2master" is a common typo that shows two commits starting
from whichever random branch that is not 'master' that happens to
be checked out currently.
* jc/revision-dash-count-parsing:
revision: parse "git log -<count>" more carefully
We get loose object names like "objects/??/..." from the
remote side, and need to convert them to their hex
representation.
The code to do so is rather hard to follow, as it uses some
calculated lengths whose origins are hard to understand and
verify (e.g., the path must be exactly 49 characters long.
why? Why doesn't the strcpy overflow obj_hex, which is the
same length as path?).
We can simplify this a bit by using skip_prefix, using standard
40- and 20-character buffers for hex and binary sha1s, and
adding some comments.
We also drop a totally bogus comment that claims strlcpy
cannot be used because "path" is not NUL-terminated. Right
between a call to strlen(path) and strcpy(path).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases, we use starts_with to check for a prefix, and
then use an already-calculated prefix length to advance a
pointer past the prefix. There are no magic numbers or
duplicated strings here, but we can still make the code
simpler and more obvious by using skip_prefix.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After handling options, any leftover arguments should be
commands. However, we pass through "--help" and "--version",
so that we convert them into "git help" and "git version"
respectively.
This is a straightforward use of skip_prefix to avoid a
magic number, but while we are there, it is worth adding a
comment to explain this otherwise confusing behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several uses of the magic number "line+45" when
parsing ACK lines from the server, and it's rather unclear
why 45 is the correct number. We can make this more clear by
keeping a running pointer as we parse, using skip_prefix to
jump past the first "ACK ", then adding 40 to jump past
get_sha1_hex (which is still magical, but hopefully 40 is
less magical to readers of git code).
Note that this actually puts us at line+44. The original
required some character between the sha1 and further ACK
flags (it is supposed to be a space, but we never enforced
that). We start our search for flags at line+44, which
meanas we are slightly more liberal than the old code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we see a file change in a commit, we expect one of:
1. A mark.
2. An "inline" keyword.
3. An object sha1.
The handling of spaces is inconsistent between the three
options. Option 1 calls a sub-function which checks for the
space, but doesn't parse past it. Option 2 parses the space,
then deliberately avoids moving the pointer past it. Option
3 detects the space locally but doesn't move past it.
This is confusing, because it looks like option 1 forgets to
check for the space (it's just buried). And option 2 checks
for "inline ", but only moves strlen("inline") characters
forward, which looks like a bug but isn't.
We can make this more clear by just having each branch move
past the space as it is checked (and we can replace the
doubled use of "inline" with a call to skip_prefix).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As in earlier commits, the diff option parser uses
starts_with to find that an argument starts with "--stat-",
and then adds strlen("stat-") to find the rest of the
option.
However, in this case the starts_with and the strlen are
separated across functions, making it easy to call the
latter without the former. Let's use skip_prefix instead of
raw pointer arithmetic to catch such a case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like earlier cases, we can use skip_prefix to avoid magic
numbers that must match the length of starts_with prefixes.
However, the numbers are a little more complicated here, as
we keep parsing past the prefix. We can solve it by keeping
a running pointer as we parse; its final value is the
location we want.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fast-import does a lot of parsing of commands and
dispatching to sub-functions. For example, given "option
foo", we might recognize "option " using starts_with, and
then hand it off to parse_option() to do the rest.
However, we do not let parse_option know that we have parsed
the first part already. It gets the full buffer, and has to
skip past the uninteresting bits. Some functions simply add
a magic constant:
char *option = command_buf.buf + 7;
Others use strlen:
char *option = command_buf.buf + strlen("option ");
And others use strchr:
char *option = strchr(command_buf.buf, ' ') + 1;
All of these are brittle and easy to get wrong (especially
given that the starts_with call and the code that assumes
the presence of the prefix are far apart). Instead, we can
use skip_prefix, and just pass each handler a pointer to its
arguments.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a common idiom to match a prefix and then skip past it
with strlen, like:
if (starts_with(foo, "bar"))
foo += strlen("bar");
This avoids magic numbers, but means we have to repeat the
string (and there is no compiler check that we didn't make a
typo in one of the strings).
We can use skip_prefix to handle this case without repeating
ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a common idiom to match a prefix and then skip past it
with a magic number, like:
if (starts_with(foo, "bar"))
foo += 3;
This is easy to get wrong, since you have to count the
prefix string yourself, and there's no compiler check if the
string changes. We can use skip_prefix to avoid the magic
numbers here.
Note that some of these conversions could be much shorter.
For example:
if (starts_with(arg, "--foo=")) {
bar = arg + 6;
continue;
}
could become:
if (skip_prefix(arg, "--foo=", &bar))
continue;
However, I have left it as:
if (skip_prefix(arg, "--foo=", &v)) {
bar = v;
continue;
}
to visually match nearby cases which need to actually
process the string. Like:
if (skip_prefix(arg, "--foo=", &v)) {
bar = atoi(v);
continue;
}
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We detect the "import-marks" capability by looking for that
string, but _without_ a trailing space. Then we skip past it
using strlen("import-marks "), with a space. So if a remote
helper gives us exactly "import-marks", we will read past
the end-of-string by one character.
This is unlikely to be a problem in practice, because such
input is malformed in the first place, and because there is
a good chance that the string has an extra NUL terminator
one character after the original (because it formerly had a
newline in it that we parsed off).
We can fix it by using skip_prefix with "import-marks ",
with the space. The other form appears to be a typo from
a515ebe (transport-helper: implement marks location as
capability, 2011-07-16); "import-marks" has never existed
without an argument, and it should match the "export-marks"
definition above.
Speaking of which, we can also use skip_prefix in a few
other places while we are in the function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fast-import shares code between its command-line parser and
the "option" command. To do so, it strips the "--" from any
command-line options and passes them to the option parser.
However, it does not confirm that the option even begins
with "--" before blindly passing "arg + 2".
It does confirm that the option starts with "-", so the only
affected case was:
git fast-import -
which would read uninitialized memory after the argument. We
can fix it by using skip_prefix and checking the result. As
a bonus, this gets rid of some magic numbers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A submodule diff generally has content like:
-Subproject commit [0-9a-f]{40}
+Subproject commit [0-9a-f]{40}
When we are using "git apply --index" with a submodule, we
first apply the textual diff, and then parse that result to
figure out the new sha1.
If the diff has bogus input like:
-Subproject commit 1234567890123456789012345678901234567890
+bogus
we will parse the "bogus" portion. Our parser assumes that
the buffer starts with "Subproject commit", and blindly
skips past it using strlen(). This can cause us to read
random memory after the buffer.
This problem was unlikely to have come up in practice (since
it requires a malformed diff), and even when it did, we
likely noticed the problem anyway as the next operation was
to call get_sha1_hex on the random memory.
However, we can easily fix it by using skip_prefix to notice
the parsing error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The skip_prefix() function returns a pointer to the content
past the prefix, or NULL if the prefix was not found. While
this is nice and simple, in practice it makes it hard to use
for two reasons:
1. When you want to conditionally skip or keep the string
as-is, you have to introduce a temporary variable.
For example:
tmp = skip_prefix(buf, "foo");
if (tmp)
buf = tmp;
2. It is verbose to check the outcome in a conditional, as
you need extra parentheses to silence compiler
warnings. For example:
if ((cp = skip_prefix(buf, "foo"))
/* do something with cp */
Both of these make it harder to use for long if-chains, and
we tend to use starts_with() instead. However, the first line
of "do something" is often to then skip forward in buf past
the prefix, either using a magic constant or with an extra
strlen(3) (which is generally computed at compile time, but
means we are repeating ourselves).
This patch refactors skip_prefix() to return a simple boolean,
and to provide the pointer value as an out-parameter. If the
prefix is not found, the out-parameter is untouched. This
lets you write:
if (skip_prefix(arg, "foo ", &arg))
do_foo(arg);
else if (skip_prefix(arg, "bar ", &arg))
do_bar(arg);
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the upcoming submodule test framework we often need to assert that an
empty directory exists in the work tree. Add the test_dir_is_empty()
function which asserts that the given argument is an empty directory.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We often represent our strings as a counted string, i.e. a pair of
the pointer to the beginning of the string and its length, and the
string may not be NUL terminated to that length.
To compare a pair of such counted strings, unpack-trees.c and
read-cache.c implement their own name_compare() functions
identically. In addition, the cache_name_compare() function in
read-cache.c is nearly identical. The only difference is when one
string is the prefix of the other string, in which case
name_compare() returns -1/+1 to show which one is longer, and
cache_name_compare() returns the difference of the lengths to show
the same information.
Unify these three functions by using the implementation from
cache_name_compare(). This does not make any difference to the
existing and future callers, as they must be paying attention only
to the sign of the returned value (and not the magnitude) because
the original implementations of these two functions return values
returned by memcmp(3) when the one string is not a prefix of the
other string, and the only thing memcmp(3) guarantees its callers is
the sign of the returned value, not the magnitude.
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The same_name() private function wants a quick-and-exact check to
see if they two names are byte-for-byte identical first and then
fall back to the slow path. Use memcmp(3) for the former to make it
clear that we do not want any "name" specific comparison.
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When merge-recursive creates a unique filename, it uses a
template like:
path~branch_%d
where the final "_%d" is filled by an incrementing counter
until we find a unique name. We allocate 8 characters for
the counter, but there is no logic to limit the size of the
integer.
Of course, this is extremely unlikely, as you would need a
hundred million collisions to trigger the problem. Even if
an attacker constructed a specialized repo, it is unlikely
that the victim would have the patience to run the merge.
However, we can make it trivially correct (and hopefully
more readable) by using a strbuf.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We sometimes allocate "msg" on the heap, but will fail to
free it if we hit the failure code path. We can instead keep
a separate variable that is safe to be freed no matter how
we get to the failure code path.
While we're here, we can also do two readability
improvements:
1. Use xstrfmt instead of a manual malloc/sprintf
2. Due to the "maybe we allocate msg, maybe we don't"
strategy, the logic for deciding which message to show
was split into two parts. Since the deallocation is now
pushed onto a separate variable, this is no longer a
concern, and we can keep all of the logic in the same
place.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is shorter, and avoids a rather complicated set of
allocation and free steps.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This avoids a manual allocation calculation, and is shorter
to boot.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is shorter, harder to get wrong, and more clearly
captures the intent.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's easy to get manual allocation calculations wrong, and
the use of strcpy/strcat raise red flags for people looking
for buffer overflows (though in this case each site was
fine).
It's also shorter to use xstrfmt, and the printf-format
tends to be easier for a reader to see what the final string
will look like.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one line shorter, and makes sure the length in the
malloc and sprintf steps match.
These conversions are very straightforward; we can drop the
malloc entirely, and replace the sprintf with xstrfmt.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one line shorter, and makes sure the length in the
malloc and copy steps match.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SysV-derived implementation of "echo" interprets some backslash
sequences as special instruction, e.g. "echo 'ab\c'" shows an
incomplete line with 'a' and 'b' on it. Avoid using it when showing
a path-like values in the script.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In many parts of the code, we do an ugly and error-prone
malloc like:
const char *fmt = "something %s";
buf = xmalloc(strlen(foo) + 10 + 1);
sprintf(buf, fmt, foo);
This makes the code brittle, and if we ever get the
allocation wrong, is a potential heap overflow. Let's
instead favor xstrfmt, which handles the allocation
automatically, and makes the code shorter and more readable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can use a strbuf to build up a string from parts, and
then detach it. In the general case, you might use multiple
strbuf_add* functions to do the building. However, in many
cases, a single strbuf_addf is sufficient, and we end up
with:
struct strbuf buf = STRBUF_INIT;
...
strbuf_addf(&buf, fmt, some, args);
str = strbuf_detach(&buf, NULL);
We can make this much more readable (and avoid introducing
an extra variable, which can clutter the code) by
introducing a convenience function:
str = xstrfmt(fmt, some, args);
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no point in using:
if (skip_prefix(buf, "foo"))
over
if (starts_with(buf, "foo"))
as the point of skip_prefix is to return a pointer to the
data after the prefix. Using starts_with is more readable,
and will make refactoring skip_prefix easier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
None of these strings is modified; marking them as const
will help later refactoring.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function originally took a whole config variable name
("var") and an offset ("ofs"). It checked "var+ofs" against
each color slot, but reported errors using the whole "var".
However, since 8b8e862 (ignore unknown color configuration,
2009-12-12), it returns -1 rather than printing its own
error, and therefore only cares about var+ofs. We can drop
the ofs parameter and teach its sole caller to derive the
pointer itself.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optimize check_refname_component using SSE2 on x86_64.
git rev-parse HEAD is a good test-case for this, since it does almost
nothing except parse refs. For one particular repo with about 60k
refs, almost all packed, the timings are:
Look up table: 29 ms
SSE2: 23 ms
This cuts about 20% off of the runtime.
Ondřej Bílka <neleai@seznam.cz> suggested an SSE2 approach to the
substring searches, which netted a speed boost over the SSE4.2 code I
had initially written.
Signed-off-by: David Turner <dturner@twitter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unicode Version 7.0 was released yesterday.
Run ./update_unicode.sh to update the zero_width table.
Note: the double_width is unchanged.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
extract_content_type() could not extract a charset parameter if the
parameter is not the first one and there is a whitespace and a following
semicolon just before the parameter. For example:
text/plain; format=fixed ;charset=utf-8
And it also could not handle correctly some other cases, such as:
text/plain; charset=utf-8; format=fixed
text/plain; some-param="a long value with ;semicolons;"; charset=utf-8
Thanks-to: Jeff King <peff@peff.net>
Signed-off-by: Yi EungJun <eungjun.yi@navercorp.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
trace_printf_key() is the only non-static function that duplicates the
printf format attribute in the .c file, remove it for consistency.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The format parameter to trace_printf functions is sometimes abbreviated
'fmt'. Rename to 'format' everywhere (consistent with POSIX' printf
specification).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also include direct dependencies (strbuf.h and git-compat-util.h for
__attribute__) so that trace.h can be used independently of cache.h, e.g.
in test programs.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow specifying only certain individual test pieces to be run
using a range notation (e.g. "t1234-test.sh --run='1-4 6 8 9-'").
* ib/test-selectively-run:
t0000-*.sh: fix the GIT_SKIP_TESTS sub-tests
test-lib: '--run' to run only specific tests
test-lib: tests skipped by GIT_SKIP_TESTS say so
test-lib: document short options in t/README
Avoid unnecessary copy of previous contents when extending the
hashtable used in pack-objects.
* rs/pack-objects-no-unnecessary-realloc:
pack-objects: use free()+xcalloc() instead of xrealloc()+memset()
Propagate the error messages from the webserver better to the
client coming over the HTTP transport.
* jk/http-errors:
http: default text charset to iso-8859-1
remote-curl: reencode http error messages
strbuf: add strbuf_reencode helper
http: optionally extract charset parameter from content-type
http: extract type/subtype portion of content-type
t5550: test display of remote http error messages
t/lib-httpd: use write_script to copy CGI scripts
test-lib: preserve GIT_CURL_VERBOSE from the environment
mailmap.file configuration names a pathname, hence should honor
~/path and ~user/path as its value.
* ow/config-mailmap-pathname:
config: respect '~' and '~user' in mailmap.file
Allow remote-helper/fast-import based transport to rename the refs
while transferring the history.
* fc/remote-helper-refmap:
transport-helper: remove unnecessary strbuf resets
transport-helper: add support to delete branches
fast-export: add support to delete refs
fast-import: add support to delete refs
transport-helper: add support to push symbolic refs
transport-helper: add support for old:new refspec
fast-export: add new --refspec option
fast-export: improve argument parsing
"git gc --auto" was recently changed to run in the background to
give control back early to the end-user sitting in front of the
terminal, but it forgot that housekeeping involving reflogs should
be done without other processes competing for accesses to the refs.
* nd/daemonize-gc:
gc --auto: do not lock refs in the background
"git remote rm" and "git remote prune" can involve removing many
refs at once, which is not a very efficient thing to do when very
many refs exist in the packed-refs file.
* jl/remote-rm-prune:
remote prune: optimize "dangling symref" check/warning
remote: repack packed-refs once when deleting multiple refs
remote rm: delete remote configuration as the last
The completion code did not know about quite a few options that are
common between "git merge" and "git pull", and a couple of options
unique to "git merge".
* jk/complete-merge-pull:
completion: add missing options for git-merge
completion: add a note that merge options are shared
Convert command line arguments from UTF-16 to UTF-8 on startup.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert command line arguments from UTF-8 to UTF-16 when creating other
processes.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MingwRT listens to _CRT_glob to decide if __getmainargs should
perform globbing, with the default being that it should.
Unfortunately, __getmainargs globbing is sub-par; for instance
patterns like "*.c" will only match c-sources in the current
directory.
Disable __getmainargs' command line wildcard expansion, so these
patterns will be left untouched, and handled by Git's superior
built-in globbing instead.
MSVC defaults to no globbing, so we don't need to do anything
in that case.
This fixes t5505 and t7810.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only public spawn function that needs to tweak the environment is
mingw_spawnvpe (called from start_command). Nevertheless, all internal
spawn* functions take an env parameter and needlessly pass the global
char **environ around. Remove the env parameter where it's not needed.
This removes the internal mingw_execve abstraction, which is no longer
needed.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in the great tradition of POSIX. Original fix by Olivier Refalo.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of "Win32: Thread-safe windows console output", child processes may
print to the console even if stdout has been redirected to a file. E.g.:
git config tar.cat.command "cat"
git archive -o test.cat HEAD
Detecting whether stdout / stderr point to our console pipe is currently
based on the assumption that OS HANDLE values are never reused. This is
apparently not true if stdout / stderr is replaced via dup2() (as in
builtin/archive.c:17).
Instead of comparing handle values, check if the file descriptor isatty()
backed by a pipe OS handle. This is only possible by swapping the handles
in MSVCRT's internal data structures, as we do in winansi_init().
Reported-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule.*.ignore and diff.ignoresubmodules are used to ignore all
submodule changes in "diff" output, but it can be confusing to
apply these configuration values to status and commit.
This is a backward-incompatible change, but should be so in a good
way (aka bugfix).
* jl/status-added-submodule-is-never-ignored:
commit -m: commit staged submodules regardless of ignore config
status/commit: show staged submodules regardless of ignore config
Compatibility enhancement for Solaris.
* cb/byte-order:
compat/bswap.h: fix endianness detection
compat/bswap.h: restore preference __BIG_ENDIAN over BIG_ENDIAN
compat/bswap.h: detect endianness on more platforms that don't use BYTE_ORDER
* as/pretty-truncate:
pretty.c: format string with truncate respects logOutputEncoding
t4205, t6006: add tests that fail with i18n.logOutputEncoding set
t4205 (log-pretty-format): use `tformat` rather than `format`
t4041, t4205, t6006, t7102: don't hardcode tested encoding value
t4205 (log-pretty-formats): don't hardcode SHA-1 in expected outputs
* jk/argv-array-for-child-process:
argv-array: drop "detach" code
get_importer: use run-command's internal argv_array
get_exporter: use argv_array
get_helper: use run-command's internal argv_array
git_connect: use argv_array
run_column_filter: use argv_array
run-command: store an optional argv_array
"git replace" learns a new "--edit" option.
* cc/replace-edit:
Documentation: replace: describe new --edit option
replace: add --edit to usage string
replace: add tests for --edit
replace: die early if replace ref already exists
replace: refactor checking ref validity
replace: make sure --edit results in a different object
replace: add --edit option
replace: factor object resolution out of replace_object
replace: use OPT_CMDMODE to handle modes
replace: refactor command-mode determination
* 'mt/patch-id-stable' (early part):
patch-id-test: test stable and unstable behaviour
patch-id: make it stable against hunk reordering
test doc: test_write_lines does not split its arguments
test: add test_write_lines helper
gitk uses a predictable ".gitk-tmp.$PID" pattern when generating
a temporary directory.
Use "mktemp -d .gitk-tmp.XXXXXX" to harden gitk against someone
seeding /tmp with files matching the pid pattern.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Currently setting submodule.<name>.ignore and/or diff.ignoreSubmodules to
"all" suppresses all output of submodule changes for gitk. This is really
confusing, as even when the user chooses to record a new commit for an
ignored submodule by adding it manually this change won't show up under
"Local changes checked in to index but not committed".
Fix that by using the '--ignore-submodules=dirty' option for both callers
of "git diff-index --cached" when the underlying git version supports that
option.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
gitk fails to show diffs when browsing a read-only repository.
This is due to gitk's assumption that the current directory is always
writable.
Teach gitk to honor either the GITK_TMPDIR or TMPDIR environment
variables. This allows users to override the default location
used when writing temporary files.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Now gitk can be configured to display author and commit dates in their
original timezone, by putting %z into datetimeformat in ~/.gitk.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Paul Mackerras <paulus@samba.org>
If the "Show origin of this line" is started from tree mode,
it still shows the result in tree mode, which I suppose not
what user expects to see.
Signed-off-by: Paul Mackerras <paulus@samba.org>
We already replace old SHA with the clipboard content for the mouse
paste event. It seems reasonable to do the same when pasting from
keyboard.
Signed-off-by: Ilya Bobyr <ilya.bobyr@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Changing get_next_line() to return the end pointer instead of NULL in
case no newline character is found treats allows us to treat complete
and incomplete lines the same, simplifying the code. Switching to
counting lines instead of EOLs allows us to start counting at the
first character, instead of having to call get_next_line() first.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the code for finding the start of the next line into a helper
function in order to reduce duplication.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'!f() { ... }; f' and "!sh -c '....' -" are recommended patterns for
declaring more complex aliases (see git wiki [1]). This commit teaches
the completion to handle them.
When determining which completion to use for an alias, an opening brace
or single quote is now skipped, and the search for a git command is
continued. For example, the aliases '!f() { git commit ... }' or "!sh
-c 'git commit ...'" now trigger commit completion. Previously, the
search stopped on the opening brace or quote, and the completion tried
it to determine how to complete, which obviously was useless.
The null command ':' is now skipped, so that it can be used as
a workaround to declare the desired completion style.
For example, the aliases
!f() { : git commit ; if ... } f
!sh -c ': git commit; if ...' -
now trigger commit completion.
Shell function declarations now work with or without space before
the parens, i.e. '!f() ...' and '!f () ...' both work.
[1] https://git.wiki.kernel.org/index.php/Aliases
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Version tests only make sense when all entries are in the same file,
so we can see if version is downgraded to 2 if 3 is not required.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This could be used to run the whole test suite with split
indexes. Index splitting is carried out at random. "git read-tree"
also resets the index and forces splitting at the next update.
I had a lot of headaches with the test suite, which proves it
exercises split index pretty good.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normally scripts do not have to be aware about split indexes because
all shared indexes are in $GIT_DIR. A simple "mv $tmp_index
$GIT_DIR/somewhere" is enough. Scripts that generate temporary indexes
and move them across repos must be aware about split index and copy
the shared file as well. This option enables that.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If $GIT_DIR is read only, we can't write $GIT_DIR/sharedindex. This
could happen when $GIT_INDEX_FILE is set to somehwere outside
$GIT_DIR.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have a large work tree but only make changes in a subset, then
$GIT_DIR/index's size should be stable after a while. If you change
branches that touch something else, $GIT_DIR/index's size may grow
large that it becomes as slow as the unified index. Do --split-index
again occasionally to force all changes back to the shared index and
keep $GIT_DIR/index small.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We know the positions of replaced entries via the replace bitmap in
"link" extension, so the "name" path does not have to be stored (it's
still in the shared index). With this, we also have a way to
distinguish additions vs replacements at load time and can catch
broken "link" extensions.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are sure that after merge_base_index() is done. cache-tree can
still be used with the final index. So don't destroy cache tree.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CE_REMOVE'd entries are removed here because only parts of the code
base (unpack_trees in fact) test this bit when they look for the
presence of an entry. Leaving them may confuse the code ignores this
bit and expects to see a real entry.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prepare_to_write_split_index() does the major work, classifying
deleted, updated and added entries. write_link_extension() then just
writes it down.
An observation is, deleting an entry, then adding it back is recorded
as "entry X is deleted, entry X is added", not "entry X is replaced".
This is simpler, with small overhead: a replaced entry is stored
without its path, a new entry is store with its path.
A note about unpack_trees() and the deduplication code inside
prepare_to_write_split_index(). Usually tracking updated/removed
entries via read-cache API is enough. unpack_trees() manipulates the
index in a different way: it throws the entire source index out,
builds up a new one, copying/duplicating entries (using dup_entry)
from the source index over if necessary, then returns the new index.
A naive solution would be marking the entire source index "deleted"
and add their duplicates as new. That could bring $GIT_DIR/index back
to the original size. So we try harder and memcmp() between the
original and the duplicate to see if it needs updating.
We could avoid memcmp() too, by avoiding duplicating the original
entry in dup_entry(). The performance gain this way is within noise
level and it complicates unpack-trees.c. So memcmp() is the preferred
way to deal with deduplication.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The large part of this patch just follows CE_ENTRY_CHANGED
marks. replace_index_entry() is updated to update
split_index->base->cache[] as well so base->cache[] does not reference
to a freed entry.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Entries that belong to the base index should not be freed. Mark
CE_REMOVE to track them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure entry addition does not lead to unifying the index. We don't
need to explicitly keep track of new entries. If ce->index is zero,
they're new. Otherwise it's unlikely that they are new, but we'll do a
thorough check later at writing time.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This split-index mode is designed to keep write cost proportional to
the number of changes the user has made, not the size of the work
tree. (Read cost is another matter, to be dealt separately.)
This mode stores index info in a pair of $GIT_DIR/index and
$GIT_DIR/sharedindex.<SHA-1>. sharedindex is large and unchanged over
time while "index" is smaller and updated often. Format details are in
index-format.txt, although not everything is implemented in this
patch.
Shared indexes are not automatically removed, because it's unclear if
the shared index is needed by any (even temporary) indexes by just
looking at it. After a while you'll collect stale shared indexes. The
good news is one shared index is useable for long, until
$GIT_DIR/index becomes too big and sluggish that the new shared index
must be created.
The safest way to clean shared indexes is to turn off split index
mode, so shared files are all garbage, delete them all, then turn on
split index mode again.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also update SHA-1 after writing. If we do not do that, the second
read_index() will see "initialized" variable already set and not read
.git/index again, which is fine, except istate->sha1 now has a stale
value.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other fill_stat_cache_info() is on new entries, which should set
CE_ENTRY_ADDED in cache_changed, so we're safe.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cache entry additions, removals and modifications are separated
out. The rest of changes are still in the catch-all flag
SOMETHING_CHANGED, which would be more specific later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
remove_marked_cache_entries() deletes entries marked with
CE_REMOVE. But if there is no such entry, do not mark the index as
"changed" because that could trigger an index update unnecessarily.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're running out of room for in-memory flags. But since b60e188
(Strip namelen out of ce_flags into a ce_namelen field - 2012-07-11),
we copy the namelen (first 12 bits) to ce_namelen field. So those bits
are free to use. Just make sure we do not accidentally write any
in-memory flags back.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is now only used by write_locked_index(). Move it to
read-cache.c (because read-cache.c will need to be aware of
alternate_index_output later) and unexport it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Permit to do a 'git clone --recursive' through git-gui.
Add a 'recursive' checkbox in the clone menu which allows
users to clone a repository and all its submodules in one
go (unless the 'update' flag is set to "none" in the
.gitmodules file for a submodule, in that case that
specific submodule is not cloned automatically).
Enable this new option per default, as most users want to
clone all submodules too when cloning the superproject
(This is currently not possible without leaving git gui
or adding a custom tool entry for that).
Signed-off-by: Henri GEIST <geist.henri@laposte.net>
Thanks-to: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Two tests (t3302 and t3419) used to have their own environment
variable to trigger expensive tests without enabling expensive
tests in other scripts; a user could set GIT_NOTES_TIMING_TESTS
but not GIT_TEST_LONG and run the whole test suite and trigger
expensive tests only in t3302 but not other tests. The same for
GIT_PATCHID_TIMING_TESTS in t3419.
While this may have seemed a good flexibility, in reality if you are
concentrating on a single test (e.g. t3302), you can just run that
single test with the GIT_TEST_LONG to trigger expensive tests. It
does not seem worth forcing other people who may want to come up
with their own expensive tests to invent new environment variables
by keeping this convention.
Drop them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b4073bb3 (git-p4: Do not include diff in spec file when just
preparing p4, 2014-05-24) broke git p4 submit, here is a proper
fix, including proper handling for windows end of lines.
Signed-off-by: Maxime Coste <frrrwww@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since git 2.0.0 starting git gui in a submodule using a gitfile fails with
the following error:
No working directory ../../../<path>
couldn't change working directory
to "../../../<path>": no such file or
directory
This is because "git rev-parse --show-toplevel" is only run when git gui
sees a git version of at least 1.7.0 (which is the version in which the
--show-toplevel option was introduced). But "package vsatisfies" returns
false when the major version changes, which is not what we want here.
Fix that for both places where the git version is checked using vsatisfies
by appending a '-' to the version number. This tells vsatisfies that a
change of the major version is not considered to be a problem, as long as
the new major version is larger. This is done for both the place that
caused the reported bug and another spot where the git version is tested
for another feature.
Reported-by: Chris Packham <judge.packham@gmail.com>
Reported-by: Yann Dirson <ydirson@free.fr>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Currently setting submodule.<name>.ignore and/or diff.ignoreSubmodules to
"all" suppresses all output of submodule changes for git-gui. This is
really confusing, as even when the user chooses to record a new commit for
an ignored submodule by adding it manually this change won't show up under
"Staged Changes (Will Commit)".
Fix that by using the '--ignore-submodules=dirty' option for both callers
of "git diff-index --cached" when the underlying git version supports that
option.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
We want to make sure that the default behavior of git-repack,
without any options, continues to treat .keep files as it
always has. Adding an explicit --no-pack-kept-objects, as
ee34a2b did, is a much less interesting test, and prevented
us from noticing the bug fixed by 64d3dc9 (repack: do not
accidentally pack kept objects by default, 2014-06-10).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently have pack.writeBitmaps, which originally
operated at the pack-objects level. This should really have
been a repack.* option from day one. Let's give it the more
sensible name, but keep the old version as a deprecated
synonym.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We previously needed to pass --no-write-bitmap-index
explicitly to pack-objects to override its reading of
pack.writebitmaps from the config. Now that it no longer
does so, we can assume that bitmaps are off by default, and
only turn them on when necessary. This also lets us avoid a
confusing tri-state flag for write_bitmaps.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The handling of the pack.writebitmaps config option
originally happened in pack-objects, which is quite
low-level. It would make more sense for drivers of
pack-objects to read the config, and then manipulate
pack-objects with command-line options.
Recently, repack learned to do so, making the low-level read
of pack.writebitmaps redundant here. Other callers, like
upload-pack, would not generally want to write bitmaps
anyway.
This could be considered a regression for somebody who is
driving pack-objects themselves outside of repack and
expects the config option to be used. However, such users
seem rather unlikely given how new the bitmap code is (and
the fact that they would basically be reimplementing repack
in the first place).
Note that we do not do anything with pack.writeBitmapHashCache
here. That option is not about "do we write bimaps", but
rather "when we are writing bitmaps, how do we do it?". You
would want that to kick in anytime you decide to write them,
similar to how pack.indexVersion is used.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of "Win32: Thread-safe windows console output", git-log no longer
terminates when the pager process dies. This is due to disabling buffering
for the replaced stdout / stderr streams. Git-log will periodically fflush
stdout (see write_or_die.c/mayble_flush_or_die()), but with no buffering,
this is a NOP that always succeeds (so we never detect the EPIPE error).
Exchange the original console handles with our console thread pipe handles
by accessing the internal MSVCRT data structures directly (which are
exposed via __pioinfo for some reason).
Implement this with minimal assumptions about the actual data structure to
make it work with different (hopefully even future) MSVCRT versions.
While messing with internal data structures is ugly, this patch solves the
problem at the source instead of adding more workarounds. We no longer need
the special winansi_isatty override, and the limitations documented in
"Win32: Thread-safe windows console output" are gone (i.e. fdopen(1/2)
returns unbuffered streams now, and isatty() for duped console file
descriptors works as expected).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Winansi.c has many static variables that are accessed and modified from
the [v][f]printf / fputs functions overridden in the file. This may cause
multi threaded git commands that print to the console to produce corrupted
output or even crash.
Additionally, winansi.c doesn't override all functions that can be used to
print to the console (e.g. fwrite, write, fputc are missing), so that ANSI
escapes don't work properly for some git commands (e.g. git-grep).
Instead of doing ANSI emulation in just a few wrapped functions on top of
the IO API, let's plug into the IO system and take advantage of the thread
safety inherent to the IO system.
Redirect stdout and stderr to a pipe if they point to the console. A
background thread reads from the pipe, handles ANSI escape sequences and
UTF-8 to UTF-16 conversion, then writes to the console.
The pipe-based stdout and stderr replacements must be set to unbuffered, as
MSVCRT doesn't support line buffering and fully buffered streams are
inappropriate for console output.
Due to the byte-oriented pipe, ANSI escape sequences and multi-byte UTF-8
sequences can no longer be expected to arrive in one piece. Replace the
string-based ansi_emulate() with a simple stateful parser (this also fixes
colored diff hunk headers, which were broken as of commit 2efcc977).
Override isatty to return true for the pipes redirecting to the console.
Exec/spawn obtain the original console handle to pass to the next process
via winansi_get_osfhandle().
All other overrides are gone, the default stdio implementations work as
expected with the piped stdout/stderr descriptors.
Global variables are either initialized on startup (single threaded) or
exclusively modified by the background thread. Threads communicate through
the pipe, no further synchronization is necessary.
The background thread is terminated by disonnecting the pipe after flushing
the stdio and pipe buffers. This doesn't work for anonymous pipes (created
via CreatePipe), as DisconnectNamedPipe only works on the read end, which
discards remaining data. Thus we have to setup the pipe manually, with the
write end beeing the server (opened with CreateNamedPipe) and the read end
the client (opened with CreateFile).
Limitations: doesn't track reopened or duped file descriptors, i.e.:
- fdopen(1/2) returns fully buffered streams
- dup(1/2), dup2(1/2) returns normal pipe descriptors (i.e. isatty() =
false, winansi_get_osfhandle won't return the original console handle)
Currently, only the git-format-patch command uses xfdopen(xdup(1)) (see
"realstdout" in builtin/log.c), but works well with these limitations.
Many thanks to Atsushi Nakagawa <atnak@chejz.com> for suggesting and
reviewing the thread-exit-mechanism.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add Unicode conversion functions to convert between Windows native UTF-16LE
encoding to UTF-8 and back.
To support repositories with legacy-encoded file names, the UTF-8 to UTF-16
conversion function tries to create valid, unique file names even for
invalid UTF-8 byte sequences, so that these repositories can be checked out
without error.
The current implementation leaves invalid UTF-8 bytes in range 0xa0 - 0xff
as is (producing printable Unicode chars \u00a0 - \u00ff, equivalent to
ISO-8859-1), and converts 0x80 - 0x9f to hex-code (\u0080 - \u009f are
control chars).
The Windows MultiByteToWideChar API was not used as it either drops invalid
UTF-8 sequences (on Win2k/XP; producing non-unique or even empty file
names) or converts them to the replacement char \ufffd (Vista/7; causing
ERROR_INVALID_NAME in subsequent calls to file system APIs).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unicode console output won't display correctly with default settings
because the default console font ("Terminal") only supports the system's
OEM charset. Unfortunately, this is a user specific setting, so it cannot
be easily fixed by e.g. some registry tricks in the setup program.
This change prints a warning on exit if console output contained non-ascii
characters and the console font is supposedly not a TrueType font (which
usually have decent Unicode support).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GetStdHandle(STD_OUTPUT_HANDLE) doesn't work for stderr if stdout is
redirected. Use _get_osfhandle of the FILE* instead.
_isatty() is true for all character devices (including parallel and serial
ports). Check return value of GetConsoleScreenBufferInfo instead to
reliably detect console handles (also don't initialize internal state from
an uninitialized CONSOLE_SCREEN_BUFFER_INFO structure if the function
fails).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
WriteConsoleW seems to be the only way to reliably print unicode to the
console (without weird code page conversions).
Also redirects vfprintf to the winansi.c version.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix const warnings in http-fetch.c and remote-curl.c main() where is
argv declared as const.
The fix should work for all future declarations of main, no matter
whether the second parameter's type is "char**", "const char**", or
"char *[]".
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code in the MinGW main macro is getting more and more complex, move to
a separate initialization function for readabiliy and extensibility.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Verify that patch ID supports an algorithm
that is stable against diff split and reordering.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patch id changes if users reorder file diffs that make up a patch.
As the result is functionally equivalent, a different patch id is
surprising to many users.
In particular, reordering files using diff -O is helpful to make patches
more readable (e.g. API header diff before implementation diff).
Add an option to change patch-id behaviour making it stable against
these kinds of patch change:
calculate SHA1 hash for each hunk separately and sum all hashes
(using a symmetrical sum) to get patch id
We use a 20byte sum and not xor - since xor would give 0 output
for patches that have two identical diffs, which isn't all that
unlikely (e.g. append the same line in two places).
The new behaviour is enabled
- when patchid.stable is true
- when --stable flag is present
Using a new flag --unstable or setting patchid.stable to false force
the historical behaviour.
In the documentation, clarify that patch ID can now be a sum of hashes,
not a hash.
Document how command line and config options affect the
behaviour.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test_write_lines carefully quotes its arguments as "$@", so
test_write_lines "a b" c
writes two lines as requested, not three.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 4ad8332 (t0001: test git init when run via an alias -
2010-11-26) noted breakages when running init via alias. The problem
is for alias to be used, $GIT_DIR must be searched, but 'init' and
'clone' are not happy with that. So we start a new process like an
external command, with clean environment in this case. Env variables
that are set by command line (e.g. "git --git-dir=.. ") are kept.
This should also fix autocorrecting a command typo to "init" because
it's the same problem: aliases are read, then "init" is unhappy with
$GIT_DIR already set up because of that.
Reminded-by: David Turner <dturner@twopensource.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t9001 used a '\n' in a sed expression to split one line into two
lines, but the usage of '\n' in the "replacement string" is not
portable.
The '\n' can be used to match a newline in the "pattern space",
but otherwise the meaning of '\n' is unspecified in POSIX.
- Gnu versions of sed will treat '\n' as a newline character.
- Other versions of sed (like /usr/bin/sed under Mac OS X)
simply ignore the '\' before the 'n', treating '\n' as 'n'.
For reference see:
pubs.opengroup.org/onlinepubs/9699919799/utilities/sed.html
http://www.gnu.org/software/sed/manual/sed.html
As the test already requires perl as a prerequisite, use perl
instead of sed.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the dirent implementation by removing the relics that were once
necessary to plug into the now unused MinGW runtime, in preparation for
Unicode file name support.
Move FindFirstFile to opendir, and FindClose to closedir, with the
following implications:
- DIR.dd_name is no longer needed
- chdir(one); opendir(relative); chdir(two); readdir() works as expected
(i.e. lists one/relative instead of two/relative)
- DIR.dd_handle is a valid handle for the entire lifetime of the DIR struct
- thus, all checks for dd_handle == INVALID_HANDLE_VALUE and dd_handle == 0
have been removed
- the special case that the directory has been fully read (which was
previously explicitly tracked with dd_handle == INVALID_HANDLE_VALUE &&
dd_stat != 0) is now handled implicitly by the FindNextFile error
handling code (if a client continues to call readdir after receiving
NULL, FindNextFile will continue to fail with ERROR_NO_MORE_FILES, to
the same effect)
- extracting dirent data from WIN32_FIND_DATA is needed in two places, so
moved to its own method
- GetFileAttributes is no longer needed. The same information can be
obtained from the FindFirstFile error code, which is ERROR_DIRECTORY if
the name is NOT a directory (-> ENOTDIR), otherwise we can use
err_win_to_posix (e.g. ERROR_PATH_NOT_FOUND -> ENOENT). The
ERROR_DIRECTORY case could be fixed in err_win_to_posix, but this
probably breaks other functionality.
Removes the ERROR_NO_MORE_FILES check after FindFirstFile (this was
fortunately a NOOP (searching for '*' always finds '.' and '..'),
otherwise the subsequent code would have copied data from an uninitialized
buffer).
Changes malloc to git support function xmalloc, so opendir will die() if
out of memory, rather than failing with ENOMEM and letting git work on
incomplete directory listings (error handling in dir.c is quite sparse).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git-compat-util.h is two dirs up, and already includes <dirent.h> (which
is the same as "dirent.h" due to -Icompat/win32 in the Makefile).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
FILENAME_MAX and MAX_PATH are both 260 on Windows, however, MAX_PATH is
used throughout the other Win32 code in Git, and also defines the length
of file name buffers in the Win32 API (e.g. WIN32_FIND_DATA.cFileName,
from which we're copying the dirent data).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the union around dirent.d_type and the unused dirent.d_reclen member
(which was necessary for compatibility with the MinGW dirent runtime, which
is no longer used).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no proper inodes on Windows, so remove dirent.d_ino and #define
NO_D_INO_IN_DIRENT in the Makefile (this skips e.g. an ineffective qsort in
fsck.c).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`do_pick_commit` handles three situations if it is not fast-forwarding.
In order for `do_pick_commit` to identify the situation, it examines the
return value of the selected merge command.
1. return value 0 stands for a clean merge
2. 1 is passed in case of a failed merge due to conflict
3. any other return value means that the merge did not even start
So far, the sequencer returns 1 in case of a failed fast-forward, which
would mean "failed merge due to conflict". However, a fast-forward
either starts and succeeds or does not start at all. In particular, it
cannot fail in between like a merge with a dirty index due to conflicts.
In order to signal the three possible situations (not only success and
failure to complete) after a pick through porcelain commands such as
`cherry-pick`, exit with a return value that is neither 0 nor 1. 128 was
chosen in line with the other situations in which the sequencer
encounters an error. In such situations, the sequencer returns a
negative value and `cherry-pick` translates this into a call to `die`.
`die` then terminates the process with exit status 128.
Signed-off-by: Fabian Ruch <bafain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert three cases of checking for a constant prefix using memcmp() to
starts_with(). This way there is no need for magic string length
constants and we avoid running over the end of the string should it be
shorter than the prefix.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was only necessary because do_tests helper the script defines
took its parameters in a wrong order. Just pass an empty string (or
not passing the optional EXPENSIVE prerequisite) when running the
test with a light-weight set of parameters and have the shell do the
right thing when parsing test_expect_success helper.
Also update coding style while we are at it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was only necessary because do_tests helper the script defines
took its parameters in a wrong order. Just pass an empty string (or
not passing the optional EXPENSIVE prerequisite) when running the
test with a light-weight set of parameters and have the shell do the
right thing when parsing test_expect_success helper.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "<<-END_OF_HERE_TEXT" to push the contents of here-text to the
right in order to show the loop structure better.
Use write_script when writing a script to be run.
Use "test" (not "[ ... ]") and avoid unnecessary ";" in the middle
of a line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two test scripts (t3302 and t3419) had copy & paste code to set
USR_BIN_TIME prerequisite. Use the test_lazy_prereq helper to define
them in the common t/test-lib.sh.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two test scripts (t0021 and t5551) had copy & paste code to set
EXPENSIVE prerequisite. Use the test_lazy_prereq helper to define
them in the common t/test-lib.sh.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first version of test 23 did simply check that no output was
sent to the standard error stream. With 5e2c7cd2 (t5551: do not use
unportable sed '\+', 2013-05-12), we started to also verify that the
expected tags were actually cloned.
Since 68b939b2 (clone: send diagnostic messages to stderr,
2013-09-18), "git clone" shows "Cloning into 'too-many-refs'" to the
standard error stream (it used to do so to the standard output),
causing the test to fail.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"log --exclude=<glob> --all | shortlog" worked as expected, but
"shortlog --exclude=<glob> --all" was not accepted at the command
line argument parser level.
* jc/shortlog-ref-exclude:
shortlog: allow --exclude=<glob> to be passed
Tools that read diagnostic output in our standard error stream do
not want to see terminal control sequence (e.g. erase-to-eol).
Detect them by checking if the standard error stream is connected to
a tty.
* mn/sideband-no-ansi:
sideband.c: do not use ANSI control sequence on non-terminal
Avoid running over the end of header string while parsing an
incoming e-mail message to extract the patch.
* rs/mailinfo-header-cmp:
mailinfo: use strcmp() for string comparison
Fix an error in parsing of .gitignore files that use a trailing
"\ " to mark pathnames that end with a SP.
* pb/trim-trailing-spaces:
dir.c:trim_trailing_spaces(): fix for " \ " sequence
"update-index --cacheinfo" in 2.0 crashes on a malformed command line.
* jc/rev-parse-argh-dashed-multi-words:
update-index: fix segfault with missing --cacheinfo argument
STRING_LIST_INIT_{NODUP,DUP} initializers list values only
for earlier structure members, relying on the usual
convention in C that the omitted members are initailized to
0, i.e. the former is expanded to the latter:
struct string_list l = STRING_LIST_INIT_DUP;
struct string_list l = { NULL, 0, 0, 1 };
and the last member that is not mentioned (i.e. 'cmp') is
initialized to NULL.
While there is nothing wrong in this construct, spelling out
all the values where the macros are defined will serve also
as a documentation, so let's do so.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow better control of the set of tests that will be executed for a
single test suite. Mostly useful while debugging or developing as it
allows to focus on a specific test.
Signed-off-by: Ilya Bobyr <ilya.bobyr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to show "(missing )" next to tests skipped because they are
specified in GIT_SKIP_TESTS. Use "(GIT_SKIP_TESTS)" instead.
Plus tests that check basic GIT_SKIP_TESTS functions.
Signed-off-by: Ilya Bobyr <ilya.bobyr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most arguments that could be provided to a test have short forms.
Unless documented, the only way to learn them is to read the code.
Signed-off-by: Ilya Bobyr <ilya.bobyr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/coding-guidelines:
CodingGuidelines: avoid "test <cond> -a/-o <cond>"
CodingGuidelines: on splitting a long line
CodingGuidelines: on comparison
CodingGuidelines: do not call the conditional statement "if()"
CodingGuidelines: give an example for shell function preamble
CodingGuidelines: give an example for control statements
CodingGuidelines: give an example for redirection
CodingGuidelines: give an example for case/esac statement
CodingGuidelines: once it is in, it is not worth the code churn
* jd/subtree:
contrib/subtree: allow adding an annotated tag
contrib/subtree/Makefile: clean up rule for "clean"
contrib/subtree/Makefile: clean up rules to generate documentation
contrib/subtree/Makefile: s/libexecdir/gitexecdir/
contrib/subtree/Makefile: use GIT-VERSION-FILE
contrib/subtree/Makefile: scrap unused $(gitdir)
Update the logic to compute the display width needed for utf8
strings and allow us to more easily maintain the tables used in
that logic.
We may want to let the users choose if codepoints with ambiguous
widths are treated as a double or single width in a follow-up patch.
* tb/unicode-6.3-zero-width:
utf8: make it easier to auto-update git_wcwidth()
utf8.c: use a table for double_width
If a file contained CRLF line endings in a repository with
core.autocrlf=input, then blame always marked lines as "Not
Committed Yet", even if they were unmodified.
* bc/blame-crlf-test:
blame: correctly handle files regardless of autocrlf
"git blame" has been optimized greatly by reorganising the data
structure that is used to keep track of the work to be done, thanks
to David Karstrup <dak@gnu.org>.
* dk/blame-reorg:
blame: large-scale performance rewrite
On a case insensitive filesystem, merge-recursive incorrectly
deleted the file that is to be renamed to a name that is the same
except for case differences.
* dt/merge-recursive-case-insensitive:
mv: allow renaming to fix case on case insensitive filesystems
merge-recursive.c: fix case-changing merge bug
The `core.deltabasecachelimit` used to default to 16 MiB , but this
proved to be too small, and has been bumped to 96 MiB.
* dk/raise-core-deltabasecachelimit:
Bump core.deltaBaseCacheLimit to 96m
We used to unconditionally disable the pager in the pager process
we spawn to feed out output, but that prevented people who want to
run "less" within "less" from doing so.
* je/pager-do-not-recurse:
pager: do allow spawning pager recursively
"git commit --allow-empty-message -C $commit" did not work when the
commit did not have any log message.
* jk/commit-C-pick-empty:
commit: do not complain of empty messages from -C
Since the very beginning of Git, we gave the LESS environment a
default value "FRSX" when we spawn "less" as the pager. "S" (chop
long lines instead of wrapping) has been removed from this default
set of options, because it is more or less a personal taste thing,
as opposed to others that have good justifications (i.e. "R" is very
much justified because many kinds of output we produce are colored
and "FX" is justified because output we produce is often shorter
than a page).
Existing users who prefer not to see line-wrapped output may want to
set
$ git config core.pager "less -S"
to restore the traditional behaviour. It is expected that people
find output from the most subcommands easier to read with the new
default, except for "blame" which tends to produce really long
lines. To override the new default only for "git blame", you can do
this:
$ git config pager.blame "less -S"
* mm/pager-less-sans-S:
pager: remove 'S' from $LESS by default
In a repository with many refs, check_refname_component can be a major
contributor to the runtime of some git commands. One such command is
git rev-parse HEAD
Timings for one particular repo, with about 60k refs, almost all
packed, are:
Old: 35 ms
New: 29 ms
Many other commands which read refs are also sped up.
Signed-off-by: David Turner <dturner@twitter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the introduction of opportunisitic updates of remote-tracking
branches, started at around f2690487 (fetch: opportunistically
update tracking refs, 2013-05-11) with a few updates in v1.8.4 era,
the remote.*.fetch configuration always kicks in even when a refspec
to specify what to fetch is given on the command line, and there is
no way to disable or override it per-invocation.
Teach the command to pay attention to the --refmap=<lhs>:<rhs>
command-line options that can be used to override the use of
configured remote.*.fetch as the refmap.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
To resurrect a misleading mention removed in the previous step,
add a section to explain how the remote-tracking configuration
interacts with the refspecs given as the command-line arguments.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is misleading to mention that <ref> that does not store is to
fetch the ref into FETCH_HEAD, because a refspec that does store is
also to fetch the LHS into FETCH_HEAD. It is doubly misleading to
list it as part of "short-cut". <ref> stands for a refspec that has
it on the LHS with a colon and an empty RHS, and that definition
should be given at the beginning of the entry where the format is
defined.
Tentatively remove this misleading description, which leaves the
`tag <tag>` as the only true short-hand, so move it at the beginning
of the entry.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The text made it sound as if the leading plus is the only thing that
is optional, and forgot that <lhs> is the same as <lhs>:, i.e. fetch
it and do not store anywhere.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace desription of old-style "Pull:" lines in remotes/
configuration with modern remote.*.fetch variables.
As this note applies only to "git pull", enable it only
in git-pull manual page.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/commit-date-approxidate:
commit: accept more date formats for "--date"
commit: print "Date" line when the user has set date
pretty: make show_ident_date public
commit: use split_ident_line to compare author/committer
Adjust shell scripts to use $(cmd) instead of `cmd`.
* ep/shell-command-substitution: (41 commits)
t5000-tar-tree.sh: use the $( ... ) construct for command substitution
t4204-patch-id.sh: use the $( ... ) construct for command substitution
t4119-apply-config.sh: use the $( ... ) construct for command substitution
t4116-apply-reverse.sh: use the $( ... ) construct for command substitution
t4057-diff-combined-paths.sh: use the $( ... ) construct for command substitution
t4038-diff-combined.sh: use the $( ... ) construct for command substitution
t4036-format-patch-signer-mime.sh: use the $( ... ) construct for command substitution
t4014-format-patch.sh: use the $( ... ) construct for command substitution
t4013-diff-various.sh: use the $( ... ) construct for command substitution
t4012-diff-binary.sh: use the $( ... ) construct for command substitution
t4010-diff-pathspec.sh: use the $( ... ) construct for command substitution
t4006-diff-mode.sh: use the $( ... ) construct for command substitution
t3910-mac-os-precompose.sh: use the $( ... ) construct for command substitution
t3905-stash-include-untracked.sh: use the $( ... ) construct for command substitution
t1050-large.sh: use the $( ... ) construct for command substitution
t1020-subdirectory.sh: use the $( ... ) construct for command substitution
t1004-read-tree-m-u-wf.sh: use the $( ... ) construct for command substitution
t1003-read-tree-prefix.sh: use the $( ... ) construct for command substitution
t1002-read-tree-m-u-2way.sh: use the $( ... ) construct for command substitution
t1001-read-tree-m-2way.sh: use the $( ... ) construct for command substitution
...
mergetool.prompt used to default to 'true', always causing a confirmation
"do you really want to run the tool on this path" to be shown.
Among the two purposes the prompt serves, ignore the use case to
confirm that the user wants to view particular path with the named
tool, and make the prompt only to confirm the choice of the tool
made by autodetection and defaulting. For those who configured the
tool explicitly, the prompt shown for the latter purpose is simply
annoying.
Strictly speaking, this is a backward incompatible change and the
users need to explicitly set the variable to 'true' if they want to
resurrect the now-ignored use case.
* fc/mergetool-prompt:
mergetool: document the default for --[no-]prompt
mergetool: run prompt only if guessed tool
* ef/send-email-absolute-path-to-the-command:
send-email: windows drive prefix (e.g. C:) appears only at the beginning
send-email: recognize absolute path on Windows
"git blame" miscounted number of columns needed to show localized
timestamps, resulting in jaggy left-side-edge of the source code
lines in its output.
* jx/blame-align-relative-time:
blame: dynamic blame_date_width for different locales
blame: fix broken time_buf paddings in relative timestamp
"git merge" without argument, even when there is an upstream
defined for the current branch, refused to run until
merge.defaultToUpstream is set to true. Flip the default of that
configuration variable to true.
* fc/merge-default-to-upstream:
merge: enable defaulttoupstream by default
Code clean-up (and a bugfix which has been merged for 2.0).
* jk/external-diff-use-argv-array:
run_external_diff: refactor cmdline setup logic
run_external_diff: hoist common bits out of conditional
run_external_diff: drop fflush(NULL)
run_external_diff: clean up error handling
run_external_diff: use an argv_array for the environment
* rs/ref-update-check-errors-early:
commit.c: check for lock error and return early
sequencer.c: check for lock failure and bail early in fast_forward_to
Enable threaded index-pack on platforms without thread-unsafe
pread() emulation.
* nd/index-pack-one-fd-per-thread:
index-pack: work around thread-unsafe pread()
Read-only operations such as "git status" that internally refreshes
the index write out the refreshed index to the disk to optimize
future accesses to the working tree, but this could race with a
"read-write" operation that modify the index while it is running.
Detect such a race and avoid overwriting the index.
Duy raised a good point that we may need to do the same for the
normal writeout codepath, not just the "opportunistic" update
codepath. While that is true, nobody sane would be running two
simultaneous operations that are clearly write-oriented competing
with each other against the same index file. So in that sense that
can be done as a less urgent follow-up for this topic.
* ym/fix-opportunistic-index-update-race:
read-cache.c: verify index file before we opportunistically update it
wrapper.c: add xpread() similar to xread()
Update "update-ref --stdin [-z]" and then introduce a transactional
support for (multi-)reference updates.
* mh/ref-transaction: (27 commits)
ref_transaction_commit(): work with transaction->updates in place
struct ref_update: add a type field
struct ref_update: add a lock field
ref_transaction_commit(): simplify code using temporary variables
struct ref_update: store refname as a FLEX_ARRAY
struct ref_update: rename field "ref_name" to "refname"
refs: remove API function update_refs()
update-ref --stdin: reimplement using reference transactions
refs: add a concept of a reference transaction
update-ref --stdin: harmonize error messages
update-ref --stdin: improve the error message for unexpected EOF
t1400: test one mistake at a time
update-ref --stdin -z: deprecate interpreting the empty string as zeros
update-ref.c: extract a new function, parse_next_sha1()
t1400: test that stdin -z update treats empty <newvalue> as zeros
update-ref --stdin: simplify error messages for missing oldvalues
update-ref --stdin: make error messages more consistent
update-ref --stdin: improve error messages for invalid values
update-ref.c: extract a new function, parse_refname()
parse_cmd_verify(): copy old_sha1 instead of evaluating <oldvalue> twice
...
Instead of running N pair-wise diff-trees when inspecting a
N-parent merge, find the set of paths that were touched by walking
N+1 trees in parallel. These set of paths can then be turned into
N pair-wise diff-tree results to be processed through rename
detections and such. And N=2 case nicely degenerates to the usual
2-way diff-tree, which is very nice.
* ks/tree-diff-nway:
mingw: activate alloca
combine-diff: speed it up, by using multiparent diff tree-walker directly
tree-diff: rework diff_tree() to generate diffs for multiparent cases as well
Portable alloca for Git
tree-diff: reuse base str(buf) memory on sub-tree recursion
tree-diff: no need to call "full" diff_tree_sha1 from show_path()
tree-diff: rework diff_tree interface to be sha1 based
tree-diff: diff_tree() should now be static
tree-diff: remove special-case diff-emitting code for empty-tree cases
tree-diff: simplify tree_entry_pathcmp
tree-diff: show_path prototype is not needed anymore
tree-diff: rename compare_tree_entry -> tree_entry_pathcmp
tree-diff: move all action-taking code out of compare_tree_entry()
tree-diff: don't assume compare_tree_entry() returns -1,0,1
tree-diff: consolidate code for emitting diffs and recursion in one place
tree-diff: show_tree() is not needed
tree-diff: no need to pass match to skip_uninteresting()
tree-diff: no need to manually verify that there is no mode change for a path
combine-diff: move changed-paths scanning logic into its own function
combine-diff: move show_log_first logic/action out of paths scanning
"--ignore-space-change" option of "git apply" ignored the
spaces at the beginning of line too aggressively, which is
inconsistent with the option of the same name "diff" and "git diff"
have.
* jc/apply-ignore-whitespace:
apply --ignore-space-change: lines with and without leading whitespaces do not match
Add a configuration variable to force --full-name to be default for
"git grep".
This may cause regressions on scripted users that do not expect
this new behaviour.
* as/grep-fullname-config:
grep: add grep.fullName config variable
read_ref_at has its own parsing of the reflog file for no really good reason
so lets change this to use the existing reflog iterators. This removes one
instance where we manually unmarshall the reflog file format.
Remove the now redundant ref_msg function.
Log messages for errors are changed slightly. We no longer print the file
name for the reflog, instead we refer to it as 'Log for ref <refname>'.
This might be a minor useability regression, but I don't really think so, since
experienced users would know where the log is anyway and inexperienced users
would not know what to do about/how to repair 'Log ... has gap ...' anyway.
Adapt the t1400 test to handle the change in log messages.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many people are on filesystems with horrible stat latency (not
limited to Windows but also NFS), which core.preloadindex was
designed to help. We discussed enabling it by default early in 2013
but didn't.
Per
http://thread.gmane.org/gmane.comp.version-control.git/219273/focus=219322
let's enable the setting by default, with the original choice of max
20 threads / min 500 paths per thread parameters.
Signed-off-by: Steve Hoelzer <shoelzer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you try to commit with unmerged entries, you get an
error like:
$ git commit
error: 'commit' is not possible because you have unmerged files.
The quotes around "commit" are clunky; the user doesn't care
that this message is a template with the command-name filled
in. Saying:
error: commit is not possible because you have unmerged files
is easier to read. As this code is called from other places,
we may also end up with:
$ git merge
error: merge is not possible because you have unmerged files
$ git cherry-pick foo
error: cherry-pick is not possible because you have unmerged files
$ git revert foo
error: revert is not possible because you have unmerged files
All of which look better without the quotes. This also
happens to match the behavior of "git pull", which generates
a similar message (but does not share code, as it is a shell
script).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you try to commit with unresolved conflicts in the index,
you get this message:
$ git commit
U foo
error: 'commit' is not possible because you have unmerged files.
hint: Fix them up in the work tree,
hint: and then use 'git add/rm <file>' as
hint: appropriate to mark resolution and make a commit,
hint: or use 'git commit -a'.
fatal: Exiting because of an unresolved conflict.
The irregular line-wrapping makes this awkward to read, and
it takes up more lines than necessary. Instead, let's rewrap
it to about 60 characters per line:
$ git commit
U foo
error: 'commit' is not possible because you have unmerged files.
hint: Fix them up in the work tree, and then use 'git add/rm <file>'
hint: as appropriate to mark resolution and make a commit, or use
hint: 'git commit -a'.
fatal: Exiting because of an unresolved conflict.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In old days before Git 1.5, it was customery for "git fetch" to use
the same local branch namespace to keep track of the remote-tracking
branches, and it was necessary to tell users not to check them out
and commit on them. Since everybody uses the separate remote layout
these days, there is no need to warn against the practice to check
out the right-hand side of <refspec> and build on it---the RHS is
typically not even a local branch.
Incidentally, this also kills one mention of "Pull:" line of
$GIT_DIR/remotes/* configuration, which is a lot less familiar to
new people than the more modern remote.*.fetch configuration
variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While it is not *wrong* per-se to say that pulling a rewound/rebased
branch will lead to an unnecessary merge conflict, that is not what
the leading "+" sign to allow non-fast-forward update of remote-tracking
branch is at all.
Helped-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This works kind of like "--color=auto" - add decorations for interactive
use, but do not change defaults when scripting or when piping the output
to anything but a terminal.
You can use either
[log]
decorate=auto
in the git config files, or the "--decorate=auto" command line option to
choose this behavior.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- "Branches" is a more common way to say "heads" in these days.
- Remote-tracking branches are used a lot more these days and it is
worth mentioning that it is one of the primary side effects of
the command to update them.
- Avoid "X. That means Y." If Y is easier to understand to
readers, just say that upfront.
- Use of explicit refspec to fetch tags does not have much to do
with turning "auto following" on or off. It is a way to fetch
tags that otherwise would not be fetched by auto-following.
Helped-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During the mail thread about "Pull is mostly evil" a user asked how
the first parent could become reversed.
This howto explains how the first parent can get reversed when viewed
by the project and then explains a method to keep the history correct.
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several fixups of the t9138-git-svn-authors-prog.sh test script to
follow current recommendations in t/README.
- Fixed a Perl script with a full "#!/usr/bin/perl" shebang
to use write_script() and $PERL_PATH as per t/README.
- Placed svn-authors data setup inside a test_expect_success.
- Fixed trailing quotes to use the same indentation throughout.
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an option to format-patch for reading a signature from a file.
$ git format-patch -1 --signature-file=$HOME/.signature
The config variable `format.signaturefile` can also be used to make
this the default.
$ git config format.signaturefile $HOME/.signature
$ git format-patch -1
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff information render the spec file unusable as is by p4,
do not include it when run with --prepare-p4-only so that the
given file can be directly passed to p4.
With --prepare-p4-only, git-p4 already tells the user it can use
p4 submit with the generated spec file. This fails because of the
diff being present in the file. Not including the diff fixes that.
Without --prepare-p4-only, keeping the diff makes sense for a
quick review of the patch before submitting it. And does not cause
problems with p4 as we remove it programmatically.
Signed-off-by: Maxime Coste <frrrwww@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is specified by RFC 2616 as the default if no "charset"
parameter is given.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently recognize an error message with a content-type
"text/plain; charset=utf-16" as text, but we ignore the
charset parameter entirely. Let's encode it to
log_output_encoding, which is presumably something the
user's terminal can handle.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a convenience wrapper around `reencode_string_len`
and `strbuf_attach`.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the previous commit, we now give a sanitized,
shortened version of the content-type header to any callers
who ask for it.
This patch adds back a way for them to cleanly access
specific parameters to the type. We could easily extract all
parameters and make them available via a string_list, but:
1. That complicates the interface and memory management.
2. In practice, no planned callers care about anything
except the charset.
This patch therefore goes with the simplest thing, and we
can expand or change the interface later if it becomes
necessary.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we get a content-type from curl, we get the whole
header line, including any parameters, and without any
normalization (like downcasing or whitespace) applied.
If we later try to match it with strcmp() or even
strcasecmp(), we may get false negatives.
This could cause two visible behaviors:
1. We might fail to recognize a smart-http server by its
content-type.
2. We might fail to relay text/plain error messages to
users (especially if they contain a charset parameter).
This patch teaches the http code to extract and normalize
just the type/subtype portion of the string. This is
technically passing out less information to the callers, who
can no longer see the parameters. But none of the current
callers cares, and a future patch will add back an
easier-to-use method for accessing those parameters.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a convenience wrapper to call tolower on each
character of the string.
This makes config's lowercase() function obsolete, though
note that because we have a strbuf, we are careful to
operate over the whole strbuf, rather than assuming that a
NUL is the end-of-string.
We could continue to offer a pure-string lowercase, but
there would be no callers (in most pure-string cases, we
actually duplicate and lowercase the duplicate, for which we
have the xstrdup_tolower wrapper).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 426e70d (remote-curl: show server content on
http errors, 2013-04-05), we relay any text/plain error
messages from the remote server to the user. However, we
never tested it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using write_script will set our shebang line appropriately
with $SHELL_PATH. The script that is there now is quite
simple and likely to succeed even with a non-POSIX /bin/sh,
but it does not hurt to be defensive.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Turning on this variable can be useful when debugging http
tests. It does break a few tests in t5541, but it is not
a variable that the user is likely to have enabled
accidentally.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have two implementations of the same function; let's drop
that to one. We take the name from daemon.c, but the
implementation (which is just slightly more efficient) from
the config code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of anchoring these checks with "^\s*", just check that the
usage is preceded by a word boundary. So now we can catch
test $cond && export foo=bar
just like we already catch
test $cond &&
export foo=bar
As a side effect, this will detect usage of "sed -i", "echo -n", "test
a == b", and "export a=b" in comments. That is not ideal but it's
potentially useful because people sometimes copy code from comments so
it can be good to also avoid nonportable patterns there.
To avoid false positives, keep the checks for 'declare' and 'which'
anchored. Those are frequently used words in normal English-language
comments.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we print an email signature, we print the divider
"-- \n", then the signature string, then two newlines.
Usually the signature is a one-liner (and the default is just the
git version), so the extra newline makes sense. But one could
easily specify a multi-line signature, like this:
git format-patch --signature='this is my long signature
it has multiple lines
' ...
and it may end with its own newline, in which case we do not have
to add yet another one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's some special code in rebase -i to deal
with --keep-empty.
Add test for this combination.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a replace ref already exists for an object, it is
much better for the user if we error out before we
let the user edit the object, rather than after.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will be useful in a following commit when we will
want to check if the ref already exists before we let the
user edit an object.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a bad idea to create a replace ref for an object
that points to the original object itself.
That's why we have to check if the result from editing
the original object is a different object and error out
if it isn't.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When core.commentChar is "auto", the comment char starts with '#' as
in default but if it's already in the prepared message, find another
char in a small subset. This should stop surprises because git strips
some lines unexpectedly.
Note that git is not smart enough to recognize '#' as the comment char
in custom templates and convert it if the final comment char is
different. It thinks '#' lines in custom templates as part of the
commit message. So don't use this with custom templates.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't support comment _strings_ (at least not yet). And multi-byte
character encoding could also be misinterpreted.
The test with two commas is updated because it violates this. It's
added with the patch that introduces core.commentChar in eff80a9
(Allow custom "comment char" - 2013-01-16). It's not clear to me _why_
that behavior is wanted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The argv_array_detach function (and associated free() function) was
really only useful for transferring ownership of the memory to a "struct
child_process". Now that we have an internal argv_array in that struct,
there are no callers left.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This saves a few lines and lets us avoid having to clean up
the memory manually when the command finishes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the code and avoids a fixed array size that
we might accidentally overflow. It also prevents a leak
after finish_command is run, by using the argv_array that
run-command manages for us.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_helper functions dynamically allocates an
argv_array, feeds it to start_command, and then returns. We
then have to later clean up the memory manually after
calling finish_command. We can make this simpler by just
using run-command's internal argv_array, which handles
cleanup for us.
This also prevents a memory leak in the case that
transport_take_over is used, in which case we free the child
in finish_connect, which does not manually free the array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This avoids magic numbers when we allocate fixed-size argv
arrays, and makes it more obvious that we are not
overflowing.
It is also the first step to fixing a memory leak. When
git_connect returns a child_process struct, the argv array
in the struct is dynamically allocated, but the individual
strings are not (they are either owned elsewhere, or are
freed). Later, in finish_connect, we free the array but
leave the strings alone.
This works for the child_process created by git_connect, but
if we use transport_take_over, we may also end up with a
child_process created by transport-helper's get_helper.
In that case, the strings are freshly allocated, and we
would want to free them. However, we have no idea in
finish_connect which type we have.
By consistently using run-command's internal argv-array, we
do not have to worry about this issue at all; finish_command
takes care of it for us, and we can drop our manual free
entirely.
Note that this actually makes the get_helper leak slightly
worse; now we are leaking both the strings and the array.
But when we adjust it in a future patch, that leak will go
away entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently set up the argv array by hand in a fixed-size
stack-local array. Using an argv array is more readable, as
it handles buffer allocation us (not to mention makes it
obvious we do not overflow the array).
However, there's a more subtle benefit, too. We leave the
function having run start_command (with the child_process
in a static global), and then later run finish_command from
another function. That means when we run finish_command,
neither column_process.argv nor the memory it points to is
valid any longer.
Most of the time finish_command does not bother looking at
argv, but it may if it encounters an error (e.g., waitpid
failure or signal death). This is unusual, which is why
nobody has noticed. But by using run-command's built-in
argv_array, the memory ownership is handled for us
automatically.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All child_process structs need to point to an argv. For
flexibility, we do not mandate the use of a dynamic
argv_array. However, because the child_process does not own
the memory, this can make memory management with a
separate argv_array difficult.
For example, if a function calls start_command but not
finish_command, the argv memory must persist. The code needs
to arrange to clean up the argv_array separately after
finish_command runs. As a result, some of our code in this
situation just leaks the memory.
To help such cases, this patch adds a built-in argv_array to
the child_process, which gets cleaned up automatically (both
in finish_command and when start_command fails). Callers
may use it if they choose, but can continue to use the raw
argv if they wish.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earlier documentation made vague references to "is set to build
on". Flesh that out with references to the config settings, so folks
can use git-config(1) to get more detail on what @{upstream} means.
For example, @{upstream} does not care about remote.pushdefault or
branch.<name>.pushremote.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_add_commit() is passed FETCH_HEAD by cmd_add_repository, which
is then rev-parsed into an object name. However, if the user is
fetching a tag rather than a branch HEAD, such as by executing:
$ git subtree add -P oldGit https://github.com/git/git.git tags/v1.8.0
the object name refers to a tag and is never peeled, and the git
commit-tree call (line 561) slaps us in the face because it doesn't
peel tags to commits.
Because peeling a committish doesn't do anything if it's already a
commit, fix by peeling the object name before assigning it to $rev
using peel_committish() from git:git-sh-setup.sh, a pre-existing
dependency of git-subtree.
Reported-by: Kevin Cagle <kcagle@micron.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: James Denholm <nod.helm@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Quite a large change, most of this was whitespace changes, though there
were a few places where I removed a comma or added a few characters.
Should pass through pep8 and pass every test.
Signed-off-by: William Giokas <1007380@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function git_wcwidth() returns for a given unicode code point the
width on the display:
-1 for control characters,
0 for combining or other non-visible code points
1 for e.g. ASCII
2 for double-width code points.
This table had been originally been extracted for one Unicode
version, probably 3.2.
We now use two tables these days, one for zero-width and another for
double-width. Make it easier to update these tables to a later
version of Unicode by factoring out the table from utf8.c into
unicode_width.h and add the script update_unicode.sh to update the
table based on the latest Unicode specification files.
Thanks to Peter Krefting <peter@softwolves.pp.se> and Kevin Bracey
<kevin@bracey.fi> for helping with their Unicode knowledge.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor git_wcwidth() and replace the if-else-if chain.
Use the table double_width which is scanned by the bisearch() function,
which is already used to find combining code points.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our test httpd setup will not generally run as root, because
Apache will want to setuid, and we do not set up the "User"
config directive. On some systems, like current Debian
unstable, Apache fails to start, and we skip the tests:
$ sudo ./t5539-fetch-http-shallow.sh --debug
1..0 # SKIP web server setup failed
$ cat trash*t5539*/httpd/error.log
[...]
(22)Invalid argument: AH00024: Couldn't set permissions on
the rewrite-map mutex; check User and Group directives
AH00016: Configuration Failed
However, on other systems (reportedly Ubuntu 11.04), Apache
seems to start, and then bails during our tests with:
getpwuid: couldn't determine user name from uid 4294967295,
you probably need to modify the User directive
Child 12037 returned a Fatal error... Apache is exiting!
This may be related to the pre-fork/threading model in use
(note that the second one complains of the child dying).
However, it's not even worth investigating; in either case
we just want to skip the tests, and we already recommend
against running the test suite as root. Let's just
explicitly check this condition and skip the tests rather
than expecting Apache to do the right thing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functionality of the "git diffall" script in contrib/ was
incorporated into "git difftool" when the --dir-diff option was added
in v1.7.11 (ca. June, 2012). Once difftool learned those features,
the diffall script became obsolete.
The only difference in behavior is that when comparing to the working
tree, difftool copies any files modified by the user back to the
working tree when the diff tool exits. "git diffall" required the
--copy-back option to do the same. All other diffall options have the
same meaning in difftool.
Make life easier for people choosing a tool to use by removing the old
diffall script. A pointer in the release notes should be enough to
help current users migrate.
Helped-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git support scripts started shipping in upstream vim in version
7.2 (2008-08-09). Clean up contrib/ a little by removing the
instructions for people on older versions of vim.
RHEL 6 already has vim 7.2.something, so anyone on a reasonably modern
operating system should not be affected. Users on RHEL 5 presumably
know that means sometimes missing out on niceties like syntax
highlighting, so this should be safe.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change checkout.c to check if a ref exists instead of checking if a loose ref
file exists when deciding if to delete an orphaned log file. Otherwise, if a
ref only exists as a packed ref without a corresponding loose ref for the
currently checked out branch, we risk that the reflog will be deleted when we
switch to a different branch.
Update the reflog tests to check for this bug.
The following reproduces the bug:
$ git init-db
$ git config core.logallrefupdates true
$ git commit -m Initial --allow-empty
[master (root-commit) bb11abe] Initial
$ git reflog master
[8561dcb master@{0}: commit (initial): Initial]
$ find .git/{refs,logs} -type f | grep master
[.git/refs/heads/master]
[.git/logs/refs/heads/master]
$ git branch foo
$ git pack-refs --all
$ find .git/{refs,logs} -type f | grep master
[.git/logs/refs/heads/master]
$ git checkout foo
$ find .git/{refs,logs} -type f | grep master
... reflog file is missing ...
$ git reflog master
... nothing ...
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add two new functions, reflog_exists and delete_reflog, to hide the internal
reflog implementation (that they are files under .git/logs/...) from callers.
Update checkout.c to use these functions in update_refs_for_switch instead of
building pathnames and calling out to file access functions. Update reflog.c
to use these to check if the reflog exists. Now there are still many places
in reflog.c where we are still leaking the reflog storage implementation but
this at least reduces the number of such dependencies by one. Finally
change two places in refs.c itself to use the new function to check if a ref
exists or not isntead of build-path-and-stat(). Now, this is strictly not all
that important since these are in parts of refs that are implementing the
actual file storage backend but on the other hand it will not hurt either.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 4dce7d9b40,
which was originally done to help Windows but was almost
immediately reverted in msysGit, and the codebase kept this
unnecessary divergence for almost two years.
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Display the tag name about to be added to the user during interactive
editing.
Signed-off-by: Thorsten Glaser <tg@debian.org>
Signed-off-by: Richard Hartmann <richih@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, Git used to set $LESS to -FRSX if $LESS was not set by
the user. The FRX flags actually make sense for Git (F and X because
sometimes the output Git pipes to less is short, and R because Git
pipes colored output). The S flag (chop long lines), on the other
hand, is not related to Git and is a matter of user preference. Git
should not decide for the user to change LESS's default.
More specifically, the S flag harms users who review untrusted code
within a pager, since a patch looking like:
-old code;
+new good code; [... lots of tabs ...] malicious code;
would appear identical to:
-old code;
+new good code;
Users who prefer the old behavior can still set the $LESS environment
variable to -FRSX explicitly, or set core.pager to 'less -S'.
The documentation in config.txt is made a bit longer to keep both an
example setting the 'S' flag (needed to recover the old behavior)
and an example showing how to unset a flag set by Git.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be observed in many versions of gcc and still exists with 4.9.0:
wt-status.c: In function ‘wt_status_print_unmerged_header’:
wt-status.c:191:2: warning: zero-length gnu_printf format string [-Wformat-zero-length]
status_printf_ln(s, c, "");
^
The user have long been told to pass -Wno-format-zero-length, but a
patch that avoids warning altogether is not too noisy, so let's do
so.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git generally changes directory to the repository root on
startup. When running "grep --open-files-in-pager" from a
subdirectory, we chdir back to the original directory before
running the pager, so that we can feed the relative
pathnames to the pager.
We currently do this chdir manually, but we can ask
run_command to do it for us. This is fewer lines of code,
and as a bonus, the chdir is limited to the child process,
which avoids any unexpected surprises for code running after
the pager (there isn't any currently, but this is
future-proofing).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git:Documentation/Makefile and others establish "RM ?= rm -f" as a
convention for rm calls in clean rules, hence follow this convention
instead of simply forcing clean to use rm.
subproj and mainline no longer need to be removed in clean, as they are
no longer created in git:contrib/subtree by "make test". Hence, remove
the rm call for those folders.
Other makefiles don't remove "*~" files, remove the rm call to prevent
unexpected behaviour in the future. Similarly, clean doesn't remove the
installable file, so rectify this.
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: James Denholm <nod.helm@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git:Documentation/Makefile establishes asciidoc/xmlto calls as being
handled through their appropriate variables, Hence, change to bring into
congruency with.
Similarly, MANPAGE_XSL exists in git:Documentation/Makefile, while
MANPAGE_NORMAL_XSL does not outside contrib/subtree. Hence, replace
MANPAGE_NORMAL_XSL with MANPAGE_XSL.
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: James Denholm <nod.helm@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$(libexecdir) isn't used anywhere else in the project, while
$(gitexecdir) is the standard in the other appropriate makefiles. Hence,
replace the former with the latter.
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: James Denholm <nod.helm@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GVF is already being used in most/all other makefiles in the project,
and has been for _quite_ a while. Hence, drop file-unique gitver and
replace with GIT_VERSION.
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: James Denholm <nod.helm@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
API documentation for strbuf does not document strbuf_trim() or
strbuf_ltrim(). Add documentation for these two functions.
Signed-off-by: Brian Gesiak <modocache@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf_trim() strips whitespace from the end, then the beginning of
a strbuf. Those operations are duplicated in strbuf_rtrim() and
strbuf_ltrim().
Replace strbuf_trim() implementation with calls to strbuf_rtrim(),
then strbuf_ltrim().
Signed-off-by: Brian Gesiak <modocache@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default of 16m causes serious thrashing for large delta chains
combined with large files.
Here are some benchmarks (pu variant of git blame):
time git blame -C src/xdisp.c >/dev/null
for a repository of Emacs repacked with git gc --aggressive (v1.9,
resulting in a window size of 250) located on an SSD drive. The file in
question has about 30000 lines, 1Mb of size, and a history with about
2500 commits.
16m (previous default):
real 3m33.936s
user 2m15.396s
sys 1m17.352s
32m:
real 3m1.319s
user 2m8.660s
sys 0m51.904s
64m:
real 2m20.636s
user 1m55.780s
sys 0m23.964s
96m:
real 2m5.668s
user 1m50.784s
sys 0m14.288s
128m:
real 2m4.337s
user 1m50.764s
sys 0m12.832s
192m:
real 2m3.567s
user 1m49.508s
sys 0m13.312s
Signed-off-by: David Kastrup <dak@gnu.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e208f9c converted error() into a macro to make its
constant return value more apparent to calling code. Commit
5ded807 prevents us using this macro with clang, since
clang's -Wunused-value is smart enough to realize that the
constant "-1" is useless in some contexts.
However, since the last commit puts the constant behind an
inline function call, this is enough to prevent the
-Wunused-value warning on both modern gcc and clang. So we
can now re-enable the macro when compiling with clang.
Tested with clang 3.3, 3.4, and 3.5.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e208f9c introduced a macro to turn error() calls
into:
(error(), -1)
to make the constant return value more visible to the
calling code (and thus let the compiler make better
decisions about the code).
This works well for code like:
return error(...);
but the "-1" is superfluous in code that just calls error()
without caring about the return value. In older versions of
gcc, that was fine, but gcc 4.9 complains with -Wunused-value.
We can work around this by encapsulating the constant return
value in a static inline function, as gcc specifically
avoids complaining about unused function returns unless the
function has been specifically marked with the
warn_unused_result attribute.
We also use the same trick for config_error_nonbool and
opterror, which learned the same error technique in a469a10.
Reported-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users may already store sensitive data such as imap.pass in
.git/config; making the file world-readable when "git config"
is called to edit means their password would be compromised
on a shared system.
[v2: updated for section renames, as noted by Junio]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 7ff8463dba, the references to gitdir
were removed but the assignment itself wasn't. Hence, drop the gitdir
assignment.
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: James Denholm <nod.helm@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dynamic linking is generally preferred over static linking, and MSVCRT.dll
has been integral part of Windows for a long time.
This also fixes linker warnings for _malloc and _free in zlib.lib, which
seems to be compiled for MSVCRT.dll already.
The DLL version also exports some of the CRT initialization functions,
which are hidden in the static libcmt.lib (e.g. __wgetmainargs, required by
subsequent Unicode patches).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Acked-by: Sebastian Schuberth <sschuberth@gmail.com>
Acked-by: Marat Radchenko <marat@slonopotamus.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now we pass off the string found by "--date" straight
to the fmt_ident function, which will use our strict
parse_date to normalize it. However, this means obvious
things like "--date=now" or "--date=2.days.ago" will not
work.
Instead, let's fallback to the approxidate function to
handle this for us. Note that we must try parse_date
ourselves first, even though approxidate will try strict
parsing itself. The reason is that approxidate throws away
any timezone information it sees from the strict parsing,
and we want to preserve it. So asking for:
git commit --date="@1234567890 -0700"
continues to set the date in -0700, regardless of what the
local timezone is.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we make a commit and the author is not the same as the
committer (e.g., because you used "-c $commit" or
"--author=$somebody"), we print the author's name and email
in both the commit-message template and as part of the
commit summary. This is a safety check to give the user a
chance to confirm that we are doing what they expect.
This patch brings the same safety for the "date" field,
which may be set by "-c" or by using "--date". Note that we
explicitly do not set it for $GIT_AUTHOR_DATE, as it is
probably not of interest when "git commit" is being fed its
parameters by a script.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use this function internally to format "Date" lines in
commit logs, but other parts of the code will want it, too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of string-wise comparing the author/committer lines
with their timestamps truncated, we can use split_ident_line
and ident_cmp. These functions are more robust than our
ad-hoc parsing, though in practice it should not matter, as
we just generated these ident lines ourselves.
However, this will also allow us easy access to the
timestamp and tz fields in future patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point immediately before it is about having SP after the control
keyword. Spell it out as 'an "if" statement' instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only said what happens when we find the Git directory under
RUN_SETUP, without saying what happens otherwise.
Signed-off-by: David Turner <dturner@twitter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows you to run:
git replace --edit SHA1
to get dumped in an editor with the contents of the object
for SHA1. The result is then read back in and used as a
"replace" object for SHA1. The writing/reading is
type-aware, so you get to edit "ls-tree" output rather than
the binary tree format.
Missing documentation and tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we add new options that operate on objects before
replacing them, we'll want to be able to feed raw sha1s
straight into replace_object. Split replace_object into the
object-resolution part and the actual replacement.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By using OPT_CMDMODE, the mutual exclusion between modes is
taken care of for us. It also makes it easy for us to
maintain a single variable with the mode, which makes its
intent more clear. We can use a single switch() to make sure
we have covered all of the modes.
This ends up breaking even in code size, but the win will be
much bigger when we start adding more modes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-replace command has three modes: listing, deleting,
and replacing. The first two are selected explicitly. If
none is selected, we fallback to listing when there are no
arguments, and replacing otherwise.
Let's figure out up front which operation we are going to
do, before getting into the application logic. That lets us
simplify our option checks (e.g., we currently have to check
whether a useless "--force" is given both along with an
explicit list, as well as with an implicit one).
This saves some lines, makes the logic easier to follow, and
will facilitate further cleanups.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow extracting To/Cc addresses from the first patch
(typically the cover letter), and use them as To/Cc addresses of the
remainder of the series.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-imap-send was directly prompting for a password rather than using
git-credential. git-send-email, on the other hand, supports git-credential.
This is a necessary improvement for users that use two factor authentication, as
they should not be expected to remember all of their app specific passwords.
Signed-off-by: Dan Albert <danalbert@google.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have existing decomposed filenames in your git
repository (e.g., that were created with older versions of
git that did not precompose unicode), a modern git with
core.precomposeunicode set does not handle them well.
The problem is that we normalize the paths coming from the
disk into their precomposed form, and then compare them
against the literal bytes in the index. This makes things
better if you have the precomposed form in the index. It
makes things worse if you actually have the decomposed form
in the index.
As a result, paths with decomposed filenames may have their
precomposed variants listed as untracked files (even though
the precomposed variants do not exist on-disk at all).
This patch just adds a test to demonstrate the breakage.
Some possible fixes are:
1. Tell everyone that NFD in the git repo is wrong, and
they should make a new commit to normalize all their
in-repo files to be precomposed.
This is probably not the right thing to do, because it
still doesn't fix checkouts of old history. And it
spreads the problem to people on byte-preserving
filesystems (like ext4), because now they have to start
precomposing their filenames as they are adde to git.
2. Do all index filename comparisons using a UTF-8 aware
comparison function when core.precomposeunicode is set.
This would probably have bad performance, and somewhat
defeats the point of converting the filenames at the
readdir level in the first place.
3. Convert index filenames to their precomposed form when
we read the index from disk. This would be efficient,
but we would have to be careful not to write the
precomposed forms back out to disk.
4. Introduce some infrastructure to efficiently match up
the precomposed/decomposed forms. We already do
something similar for case-insensitive files using
name-hash.c. We might be able to adapt that strategy
here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SwitchToThread() only gives away the rest of the current time slice
to another thread in the current process. So if the thread that feeds
the file decscriptor we're polling is not in the current process, we
get busy-waiting.
I played around with this quite a bit. After trying some more complex
schemes, I found that what worked best is to just sleep 1 millisecond
between iterations. Though it's a very short time, it still completely
eliminates the busy wait condition, without hurting perf.
There code uses SleepEx(1, TRUE) to sleep. See this page for a good
discussion of why that is better than calling SwitchToThread, which
is what was used previously:
http://stackoverflow.com/questions/1383943/switchtothread-vs-sleep1
Note that calling SleepEx(0, TRUE) does *not* solve the busy wait.
The most striking case was when testing on a UNC share with a large repo,
on a single CPU machine. Without the fix, it took 4 minutes 15 seconds,
and with the fix it took just 1:08! I think it's because git-upload-pack's
busy wait was eating the CPU away from the git process that's doing the
real work. With multi-proc, the timing is not much different, but tons of
CPU time is still wasted, which can be a killer on a server that needs to
do bunch of other things.
I also tested the very fast local case, and didn't see any measurable
difference. On a big repo with 4500 files, the upload-pack took about 2
seconds with and without the fix.
[jc: this was first accepted in msysgit tree in May 2012 via a pull
request and Paolo Bonzini has also accepted the same fix to Gnulib
around the same time; see $gmane/247518 for a bit more detail]
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous implementation used a single sorted linear list of blame
entries for organizing all partial or completed work. Every subtask had
to scan the whole list, with most entries not being relevant to the
task. The resulting run-time was quadratic to the number of separate
chunks.
This change gives every subtask its own data to work with. Subtasks are
organized into "struct origin" chains hanging off particular commits.
Commits are organized into a priority queue, processing them in commit
date order in order to keep most of the work affecting a particular blob
collated even in the presence of an extensive merge history.
For large files with a diversified history, a speedup by a factor of 3
or more is not unusual.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In large repos, the recursion implementation of contains(commit,
commit_list) may result in a stack overflow. Replace the recursion with
a loop to fix it.
This problem is more apparent on Windows than on Linux, where the stack
is more limited by default.
See also this thread on the msysGit list:
https://groups.google.com/d/topic/msysgit/FqT6boJrb2g/discussion
[jes: re-written to imitate the original recursion more closely]
Thomas Braun pointed out several documentation shortcomings.
Tests are run only if ulimit -s is available. This means they cannot
be run on Windows.
Signed-off-by: Jean-Jacques Lafay <jeanjacques.lafay@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: Stepan Kasal <kasal@ucw.cz>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original motivation of using the prompt was to confirm to run a
tool on this particular (as opposed to another) path, but the user
can also take the prompt as to confirm to run this (as opposed to
some other) tool. The latter of which of course is irritating for
those who told which exact tool to use, which is the reason why we
are flipping the default.
During the review discussion of the patch, many people (including
the maintainer) missed that a user can find the prompt useful way to
skip running the tool on particular paths. Clarify it by adding a
brief half-sentence to the description.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a media file contains valid UTF-8, git-remote-mediawiki tried to be
too clever about the encoding, and the call to utf8::downgrade() on the
downloaded content was failing with
Wide character in subroutine entry at git-remote-mediawiki line 583.
Instead, use $response->decode() to apply decoding linked to the
Content-Encoding: header, and return the content without attempting any
charset decoding.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the user had to launch a complete re-install after a lighttpd
stop (e.g. a reboot).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tighten the regexp used in the "file_name_is_absolute" replacement
used on msys to declare that only "[a-zA-Z]:" that appear at the
very beginning is a path with a drive-prefix.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no point in this:
% git merge
fatal: No commit specified and merge.defaultToUpstream not set.
We know the most likely scenario is that the user wants to merge the
upstream, and if not, he can set merge.defaultToUpstream to false.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's annoying to see the prompt:
Hit return to start merge resolution tool (foo):
Every time the user does 'git mergetool' even if the user already
configured 'foo' as the wanted tool.
Display this prompt only when the user hasn't explicitly configured a
tool.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's similar to the default, except that the other windows are hidden.
This ensures that removed/added colors are still visible on the main
merge window, but the other windows not visible.
Specially useful with merge.conflictstyle=diff3.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This saves us a few branches when RUN_SETUP is set up.
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't want to pass arguments specific to fast-export to
setup_revisions.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current logic makes it hard to see what gets put onto
the command line in which cases. Pulling out a helper
function lets us see that we have two sets of file data, and
the second set either uses the original name, or the "other"
renamed/copy name.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whether we have diff_filespecs to give to the diff command
or not, we always are going to run the program and pass it
the pathname. Let's pull that duplicated part out of the
conditional to make it more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fflush was added in d5535ec (Use run_command() to spawn
external diff programs instead of fork/exec., 2007-10-19),
because flushing buffers before forking is a good habit.
But later, 7d0b18a (Add output flushing before fork(),
2008-08-04) added it to the generic run-command interface,
meaning that our flush here is redundant.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the external diff reports an error, we try to clean up
and die. However, we can make this process a bit simpler:
1. We do not need to bother freeing memory, since we are
about to exit. Nor do we need to clean up our
tempfiles, since the atexit() handler will do it for
us. So we can die as soon as we see the error.
3. We can just call die() rather than fprintf/exit. This
does technically change our exit code, but the exit
code of "1" is not meaningful here. In fact, it is
probably wrong, since "1" from diff usually means
"completed successfully, but there were differences".
And while we're there, we can mark the error message for
translation, and drop the full stop at the end to make it
more like our other messages.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently use static buffers and a static array for
formatting the environment passed to the external diff.
There's nothing wrong in the code, but it is much easier to
verify that it is correct if we use a dynamic argv_array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the check for the lock failure to happen immediately after
lock_any_ref_for_update(). Previously the lock and the
check-if-lock-failed was separated by a handful of string
manipulation statements.
Moving the check to occur immediately after the failed lock makes
the code slightly easier to read and makes it follow the pattern of
try-to-take-a-lock();
if (check-if-lock-failed) {
error();
}
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change fast_forward_to() to check if locking the ref failed, print a
nice error message and bail out early.
The old code did not check if ref_lock was NULL and relied on the
fact that the write_ref_sha1() would safely detect this condition
and set the return variable ret to indicate an error.
While that is safe, it makes the code harder to read for two reasons:
* Inconsistency. Almost all other places we do check the lock for
NULL explicitly, so the naive reader is confused "why don't we
check here?"
* And relying on write_ref_sha1() to detect and return an error for
when a previous lock_any_ref_for_update() failed feels obfuscated.
This change should not change any functionality or logic aside from
adding an extra error message when this condition is triggered
(write_ref_sha1() returns an error silently for this condition).
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some broken subversion server gives timestamps with only one digit
in the hour part, like this:
2014-01-07T5:01:02.048176Z
Loosen the regexp that expected to see two-digit hour, minute and
second parts to accept a single-digit hour (but not minute or
second).
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, absolute paths might start with a DOS drive prefix,
which these two checks failed to recognize.
Unfortunately, we cannot simply use the file_name_is_absolute
helper in File::Spec::Functions, because Git for Windows has an
MSYS-based Perl, where this helper doesn't grok DOS
drive-prefixes.
So let's manually check for these in that case, and fall back to
the File::Spec-helper on other platforms (e.g Win32 with native
Perl)
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both MSVC and MINGW have alloca(3) definitions in malloc.h, so by moving
win32-compat alloca.h from compat/vcbuild/include/ to compat/win32/ ,
which is included by both MSVC and MINGW CFLAGS, we can make alloca()
work on both those Windows environments.
In MINGW, malloc.h has explicit check for GNUC and if it is so, defines
alloca to __builtin_alloca, so it looks like we don't need to add any
code to here-shipped alloca.h to get optimum performance.
Compile-tested on Windows in MSysGit.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Acked-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As was recently shown in "combine-diff: optimize
combine_diff_path sets intersection", combine-diff runs very slowly. In
that commit we optimized paths sets intersection, but that accounted
only for ~ 25% of the slowness, and as my tracing showed, for linux.git
v3.10..v3.11, for merges a lot of time is spent computing
diff(commit,commit^2) just to only then intersect that huge diff to
almost small set of files from diff(commit,commit^1).
In previous commit, we described the problem in more details, and
reworked the diff tree-walker to be general one - i.e. to work in
multiple parent case too. Now is the time to take advantage of it for
finding paths for combine diff.
The implementation is straightforward - if we know, we can get generated
diff paths directly, and at present that means no diff filtering or
rename/copy detection was requested(*), we can call multiparent tree-walker
directly and get ready paths.
(*) because e.g. at present, all diffcore transformations work on
diff_filepair queues, but in the future, that limitation can be
lifted, if filters would operate directly on combine_diff_paths.
Timings for `git log --raw --no-abbrev --no-renames` without `-c` ("git log")
and with `-c` ("git log -c") and with `-c --merges` ("git log -c --merges")
before and after the patch are as follows:
linux.git v3.10..v3.11
log log -c log -c --merges
before 1.9s 16.4s 15.2s
after 1.9s 2.4s 1.1s
The result stayed the same.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously diff_tree(), which is now named ll_diff_tree_sha1(), was
generating diff_filepair(s) for two trees t1 and t2, and that was
usually used for a commit as t1=HEAD~, and t2=HEAD - i.e. to see changes
a commit introduces.
In Git, however, we have fundamentally built flexibility in that a
commit can have many parents - 1 for a plain commit, 2 for a simple merge,
but also more than 2 for merging several heads at once.
For merges there is a so called combine-diff, which shows diff, a merge
introduces by itself, omitting changes done by any parent. That works
through first finding paths, that are different to all parents, and then
showing generalized diff, with separate columns for +/- for each parent.
The code lives in combine-diff.c .
There is an impedance mismatch, however, in that a commit could
generally have any number of parents, and that while diffing trees, we
divide cases for 2-tree diffs and more-than-2-tree diffs. I mean there
is no special casing for multiple parents commits in e.g.
revision-walker .
That impedance mismatch *hurts* *performance* *badly* for generating
combined diffs - in "combine-diff: optimize combine_diff_path
sets intersection" I've already removed some slowness from it, but from
the timings provided there, it could be seen, that combined diffs still
cost more than an order of magnitude more cpu time, compared to diff for
usual commits, and that would only be an optimistic estimate, if we take
into account that for e.g. linux.git there is only one merge for several
dozens of plain commits.
That slowness comes from the fact that currently, while generating
combined diff, a lot of time is spent computing diff(commit,commit^2)
just to only then intersect that huge diff to almost small set of files
from diff(commit,commit^1).
That's because at present, to compute combine-diff, for first finding
paths, that "every parent touches", we use the following combine-diff
property/definition:
D(A,P1...Pn) = D(A,P1) ^ ... ^ D(A,Pn) (w.r.t. paths)
where
D(A,P1...Pn) is combined diff between commit A, and parents Pi
and
D(A,Pi) is usual two-tree diff Pi..A
So if any of that D(A,Pi) is huge, tracting 1 n-parent combine-diff as n
1-parent diffs and intersecting results will be slow.
And usually, for linux.git and other topic-based workflows, that
D(A,P2) is huge, because, if merge-base of A and P2, is several dozens
of merges (from A, via first parent) below, that D(A,P2) will be diffing
sum of merges from several subsystems to 1 subsystem.
The solution is to avoid computing n 1-parent diffs, and to find
changed-to-all-parents paths via scanning A's and all Pi's trees
simultaneously, at each step comparing their entries, and based on that
comparison, populate paths result, and deduce we could *skip*
*recursing* into subdirectories, if at least for 1 parent, sha1 of that
dir tree is the same as in A. That would save us from doing significant
amount of needless work.
Such approach is very similar to what diff_tree() does, only there we
deal with scanning only 2 trees simultaneously, and for n+1 tree, the
logic is a bit more complex:
D(T,P1...Pn) calculation scheme
-------------------------------
D(T,P1...Pn) = D(T,P1) ^ ... ^ D(T,Pn) (regarding resulting paths set)
D(T,Pj) - diff between T..Pj
D(T,P1...Pn) - combined diff from T to parents P1,...,Pn
We start from all trees, which are sorted, and compare their entries in
lock-step:
T P1 Pn
- - -
|t| |p1| |pn|
|-| |--| ... |--| imin = argmin(p1...pn)
| | | | | |
|-| |--| |--|
|.| |. | |. |
. . .
. . .
at any time there could be 3 cases:
1) t < p[imin];
2) t > p[imin];
3) t = p[imin].
Schematic deduction of what every case means, and what to do, follows:
1) t < p[imin] -> ∀j t ∉ Pj -> "+t" ∈ D(T,Pj) -> D += "+t"; t↓
2) t > p[imin]
2.1) ∃j: pj > p[imin] -> "-p[imin]" ∉ D(T,Pj) -> D += ø; ∀ pi=p[imin] pi↓
2.2) ∀i pi = p[imin] -> pi ∉ T -> "-pi" ∈ D(T,Pi) -> D += "-p[imin]"; ∀i pi↓
3) t = p[imin]
3.1) ∃j: pj > p[imin] -> "+t" ∈ D(T,Pj) -> only pi=p[imin] remains to investigate
3.2) pi = p[imin] -> investigate δ(t,pi)
|
|
v
3.1+3.2) looking at δ(t,pi) ∀i: pi=p[imin] - if all != ø ->
⎧δ(t,pi) - if pi=p[imin]
-> D += ⎨
⎩"+t" - if pi>p[imin]
in any case t↓ ∀ pi=p[imin] pi↓
~
For comparison, here is how diff_tree() works:
D(A,B) calculation scheme
-------------------------
A B
- -
|a| |b| a < b -> a ∉ B -> D(A,B) += +a a↓
|-| |-| a > b -> b ∉ A -> D(A,B) += -b b↓
| | | | a = b -> investigate δ(a,b) a↓ b↓
|-| |-|
|.| |.|
. .
. .
~~~~~~~~
This patch generalizes diff tree-walker to work with arbitrary number of
parents as described above - i.e. now there is a resulting tree t, and
some parents trees tp[i] i=[0..nparent). The generalization builds on
the fact that usual diff
D(A,B)
is by definition the same as combined diff
D(A,[B]),
so if we could rework the code for common case and make it be not slower
for nparent=1 case, usual diff(t1,t2) generation will not be slower, and
multiparent diff tree-walker would greatly benefit generating
combine-diff.
What we do is as follows:
1) diff tree-walker ll_diff_tree_sha1() is internally reworked to be
a paths generator (new name diff_tree_paths()), with each generated path
being `struct combine_diff_path` with info for path, new sha1,mode and for
every parent which sha1,mode it was in it.
2) From that info, we can still generate usual diff queue with
struct diff_filepairs, via "exporting" generated
combine_diff_path, if we know we run for nparent=1 case.
(see emit_diff() which is now named emit_diff_first_parent_only())
3) In order for diff_can_quit_early(), which checks
DIFF_OPT_TST(opt, HAS_CHANGES))
to work, that exporting have to be happening not in bulk, but
incrementally, one diff path at a time.
For such consumers, there is a new callback in diff_options
introduced:
->pathchange(opt, struct combine_diff_path *)
which, if set to !NULL, is called for every generated path.
(see new compat ll_diff_tree_sha1() wrapper around new paths
generator for setup)
4) The paths generation itself, is reworked from previous
ll_diff_tree_sha1() code according to "D(A,P1...Pn) calculation
scheme" provided above:
On the start we allocate [nparent] arrays in place what was
earlier just for one parent tree.
then we just generalize loops, and comparison according to the
algorithm.
Some notes(*):
1) alloca(), for small arrays, is used for "runs not slower for
nparent=1 case than before" goal - if we change it to xmalloc()/free()
the timings get ~1% worse. For alloca() we use just-introduced
xalloca/xalloca_free compatibility wrappers, so it should not be a
portability problem.
2) For every parent tree, we need to keep a tag, whether entry from that
parent equals to entry from minimal parent. For performance reasons I'm
keeping that tag in entry's mode field in unused bit - see S_IFXMIN_NEQ.
Not doing so, we'd need to alloca another [nparent] array, which hurts
performance.
3) For emitted paths, memory could be reused, if we know the path was
processed via callback and will not be needed later. We use efficient
hand-made realloc-style path_appendnew(), that saves us from ~1-1.5%
of potential additional slowdown.
4) goto(s) are used in several places, as the code executes a little bit
faster with lowered register pressure.
Also
- we should now check for FIND_COPIES_HARDER not only when two entries
names are the same, and their hashes are equal, but also for a case,
when a path was removed from some of all parents having it.
The reason is, if we don't, that path won't be emitted at all (see
"a > xi" case), and we'll just skip it, and FIND_COPIES_HARDER wants
all paths - with diff or without - to be emitted, to be later analyzed
for being copies sources.
The new check is only necessary for nparent >1, as for nparent=1 case
xmin_eqtotal always =1 =nparent, and a path is always added to diff as
removal.
~~~~~~~~
Timings for
# without -c, i.e. testing only nparent=1 case
`git log --raw --no-abbrev --no-renames`
before and after the patch are as follows:
navy.git linux.git v3.10..v3.11
before 0.611s 1.889s
after 0.619s 1.907s
slowdown 1.3% 0.9%
This timings show we did no harm to usual diff(tree1,tree2) generation.
From the table we can see that we actually did ~1% slowdown, but I think
I've "earned" that 1% in the previous patch ("tree-diff: reuse base
str(buf) memory on sub-tree recursion", HEAD~~) so for nparent=1 case,
net timings stays approximately the same.
The output also stayed the same.
(*) If we revert 1)-4) to more usual techniques, for nparent=1 case,
we'll get ~2-2.5% of additional slowdown, which I've tried to avoid, as
"do no harm for nparent=1 case" rule.
For linux.git, combined diff will run an order of magnitude faster and
appropriate timings will be provided in the next commit, as we'll be
taking advantage of the new diff tree-walker for combined-diff
generation there.
P.S. and combined diff is not some exotic/for-play-only stuff - for
example for a program I write to represent Git archives as readonly
filesystem, there is initial scan with
`git log --reverse --raw --no-abbrev --no-renames -c`
to extract log of what was created/changed when, as a result building a
map
{} sha1 -> in which commit (and date) a content was added
that `-c` means also show combined diff for merges, and without them, if
a merge is non-trivial (merges changes from two parents with both having
separate changes to a file), or an evil one, the map will not be full,
i.e. some valid sha1 would be absent from it.
That case was my initial motivation for combined diffs speedup.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we free the transaction when we are done, there is no need to
make a copy of transaction->updates before working with it.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It used to be that ref_transaction_commit() allocated a temporary
array to hold the types of references while it is working. Instead,
add a type field to ref_update that ref_transaction_commit() can use
as its scratch space.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we manage ref_update objects internally, we can use them to
hold some of the scratch space we need when actually carrying out the
updates. Store the (struct ref_lock *) there.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use temporary variables in the for-loop blocks to simplify expressions
in the rest of the loop.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is consistent with the usual nomenclature.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It has been superseded by reference transactions. This also means
that struct ref_update can become private.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change is mostly clerical: the parse_cmd_*() functions need to
use local variables rather than a struct ref_update to collect the
arguments needed for each update, and then call ref_transaction_*() to
queue the change rather than building up the list of changes at the
caller side.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Build out the API for dealing with a bunch of reference checks and
changes within a transaction. Define an opaque ref_transaction type
that is managed entirely within refs.c. Introduce functions for
beginning a transaction, adding updates to a transaction, and
committing/rolling back a transaction.
This API will soon replace update_refs().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make (most of) the error messages for invalid input have the same
format [1]:
$COMMAND [SP $REFNAME]: $MESSAGE
Update the tests accordingly.
[1] A few error messages are left with their old form, because
$COMMAND and $REFNAME aren't passed all the way down the call
stack. Maybe those sites should be changed some day, too.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Distinguish this error from the error that an argument is missing for
another reason. Update the tests accordingly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This case wants to test passing a bad refname to the "update" command.
But it also passes too few arguments to "update", which muddles the
situation: which error should be diagnosed? So split this test into
two:
* One that passes too few arguments to update
* One that passes all three arguments to "update", but with a bad
refname.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the original version of this command, for the single case of the
"update" command's <newvalue>, the empty string was interpreted as
being equivalent to 40 "0"s. This shorthand is unnecessary (binary
input will usually be generated programmatically anyway), and it
complicates the parser and the documentation.
So gently deprecate this usage: remove its description from the
documentation and emit a warning if it is found. But for reasons of
backwards compatibility, continue to accept it.
Helped-by: Brad King <brad.king@kitware.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace three functions, update_store_new_sha1(),
update_store_old_sha1(), and parse_next_arg(), with a single function,
parse_next_sha1(). The new function takes care of a whole argument,
including checking whether it is there, converting it to an SHA-1, and
emitting errors on EOF or for invalid values. The return value
indicates whether the argument was present or absent, which requires
a bit of intelligence because absent values are represented
differently depending on whether "-z" was used.
The new interface means that the calling functions, parse_cmd_*(),
don't have to interpret the result differently based on the
line_termination mode that is in effect. It also means that
parse_cmd_create() can distinguish unambiguously between an empty new
value and a zeros new value, which fixes a failure in t1400.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the (slightly inconsistent) status quo; make sure it doesn't
change by accident.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of, for example,
fatal: update refs/heads/master missing [<oldvalue>] NUL
emit
fatal: update refs/heads/master missing <oldvalue>
Update the tests accordingly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old error messages emitted for invalid input sometimes said
"<oldvalue>"/"<newvalue>" and sometimes said "old value"/"new value".
Convert them all to the former. Update the tests accordingly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an invalid value is passed to "update-ref --stdin" as <oldvalue> or
<newvalue>, include the command and the name of the reference at the
beginning of the error message. Update the tests accordingly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no reason to obscure the fact that parse_first_arg() always
parses refnames. Form the new function by combining parse_first_arg()
and update_store_ref_name().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aside from avoiding a tiny bit of work, this makes it transparently
obvious that old_sha1 and new_sha1 are identical. It is arguably a
bit silly to have to set new_sha1 in order to verify old_sha1, but
that is a problem for another day.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Read the whole input into a strbuf at once, and then parse it from
there. This might also be a tad faster, but that is not the point.
The point is to decouple the parsing code from the input source (the
old parsing code had to read new data even in the middle of commands).
Add docstrings for the parsing functions.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old signature of update_refs() required a
(const struct ref_update **) for its updates_orig argument. The
"const" is presumably there to promise that the function will not
modify the contents of the structures.
But this declaration does not permit the function to be called with a
(struct ref_update **), which is perfectly legitimate. C's type
system is not powerful enough to express what we'd like. So remove
the first "const" from the declaration.
On the other hand, the function *can* promise not to modify the
pointers within the array that is passed to it without inconveniencing
its callers. So add a "const" that has that effect, making the final
declaration
(struct ref_update * const *).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given that these constants are only being used when updating
references, it is inappropriate to give them such generic names as
"DIE_ON_ERR". So prefix their names with "UPDATE_REFS_".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously there were no good tests of C-quoted arguments.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old parse_arg(), when fed an argument
"refs/heads/a"master
parsed 'refs/heads/a' off of the front of the argument and considered
itself successful. It was only when parse_next_arg() tried to parse
the *next* argument that a problem was noticed. But in fact, the
definition of the input format requires arguments to be terminated by
SP or NUL, so *this* argument is already erroneous and parse_arg()
should diagnose the problem.
So teach parse_arg() to verify that C-quoted arguments are terminated
correctly. If not, emit a more specific error message.
There is no corresponding error case of a non-C-quoted argument that
is not terminated correctly, because the end of a non-quoted argument
is *by definition* a space or NUL, so there is no way to insert other
junk between the "end" of the argument and the argument terminator.
Adjust the tests to expect the new error message. Add a docstring to
the function, incorporating the comments that were formerly within the
function plus some added information.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old version was passing (among other things)
update SP refs/heads/c NUL NUL 0{40} NUL
to "git update-ref -z --stdin" to test whether the old-value check for
c is working. But the <newvalue> is empty, which is a bit off the
beaten track.
So, to be sure that we are testing what we want to test, provide an
actual <newvalue> on the "update" line.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test
stdin -z create ref fails with zero new value
actually passes an empty new value, not a zero new value. So rename
the test s/zero/empty/, and change the expected error from
fatal: create $c given zero new value
to
fatal: create $c missing <newvalue>
Of course, this makes the test fail now, because although "git
update-ref" tries to distinguish between these two errors, it does not
succeed in this situation. Fixing it is more than a one-liner, so
mark the test test_expect_failure for now. The failure will be fixed
later in this patch series.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next patch we'll have to use alloca() for performance reasons,
but since alloca is non-standardized and is not portable, let's have a
trick with compatibility wrappers:
1. at configure time, determine, do we have working alloca() through
alloca.h, and define
#define HAVE_ALLOCA_H
if yes.
2. in code
#ifdef HAVE_ALLOCA_H
# include <alloca.h>
# define xalloca(size) (alloca(size))
# define xalloca_free(p) do {} while(0)
#else
# define xalloca(size) (xmalloc(size))
# define xalloca_free(p) (free(p))
#endif
and use it like
func() {
p = xalloca(size);
...
xalloca_free(p);
}
This way, for systems, where alloca is available, we'll have optimal
on-stack allocations with fast executions. On the other hand, on
systems, where alloca is not available, this gracefully fallbacks to
xmalloc/free.
Both autoconf and config.mak.uname configurations were updated. For
autoconf, we are not bothering considering cases, when no alloca.h is
available, but alloca() works some other way - its simply alloca.h is
available and works or not, everything else is deep legacy.
For config.mak.uname, I've tried to make my almost-sure guess for where
alloca() is available, but since I only have access to Linux it is the
only change I can be sure about myself, with relevant to other changed
systems people Cc'ed.
NOTE
SunOS and Windows had explicit -DHAVE_ALLOCA_H in their configurations.
I've changed that to now-common HAVE_ALLOCA_H=YesPlease which should be
correct.
Cc: Brandon Casey <drafnel@gmail.com>
Cc: Marius Storm-Olsen <mstormo@gmail.com>
Cc: Johannes Sixt <j6t@kdbg.org>
Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Cc: Gerrit Pape <pape@smarden.org>
Cc: Petr Salinger <Petr.Salinger@seznam.cz>
Cc: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Thomas Schwinge <thomas@codesourcery.com> (GNU Hurd changes)
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of allocating it all the time for every subtree in
ll_diff_tree_sha1, let's allocate it once in diff_tree_sha1, and then
all callee just use it in stacking style, without memory allocations.
This should be faster, and for me this change gives the following
slight speedups for
git log --raw --no-abbrev --no-renames --format='%H'
navy.git linux.git v3.10..v3.11
before 0.618s 1.903s
after 0.611s 1.889s
speedup 1.1% 0.7%
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As described in previous commit, when recursing into sub-trees, we can
use lower-level tree walker, since its interface is now sha1 based.
The change is ok, because diff_tree_sha1() only invokes
ll_diff_tree_sha1(), and also, if base is empty, try_to_follow_renames().
But base is not empty here, as we have added a path and '/' before
recursing.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next commit this will allow to reduce intermediate calls, when
recursing into subtrees - at that stage we know only subtree sha1, and
it is natural for tree walker to start from that phase. For now we do
diff_tree
show_path
diff_tree_sha1
diff_tree
...
and the change will allow to reduce it to
diff_tree
show_path
diff_tree
Also, it will allow to omit allocating strbuf for each subtree, and just
reuse the common strbuf via playing with its len.
The above-mentioned improvements go in the next 2 patches.
The downside is that try_to_follow_renames(), if active, we cause
re-reading of 2 initial trees, which was negligible based on my timings,
and which is outweighed cogently by the upsides.
NOTE To keep with the current interface and semantics, I needed to
rename the function from diff_tree() to diff_tree_sha1(). As
diff_tree_sha1() was already used, and the function we are talking here
is its more low-level helper, let's use convention for prefixing
such helpers with "ll_". So the final renaming is
diff_tree() -> ll_diff_tree_sha1()
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We reworked all its users to use the functionality through
diff_tree_sha1 variant in recent patches (see "tree-diff: allow
diff_tree_sha1 to accept NULL sha1" and what comes next).
diff_tree() is now not used outside tree-diff.c - make it static.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While walking trees, we iterate their entries from lowest to highest in
sort order, so empty tree means all entries were already went over.
If we artificially assign +infinity value to such tree "entry", it will
go after all usual entries, and through the usual driver loop we will be
taking the same actions, which were hand-coded for special cases, i.e.
t1 empty, t2 non-empty
pathcmp(+∞, t2) -> +1
show_path(/*t1=*/NULL, t2); /* = t1 > t2 case in main loop */
t1 non-empty, t2-empty
pathcmp(t1, +∞) -> -1
show_path(t1, /*t2=*/NULL); /* = t1 < t2 case in main loop */
In other words when we have t1 and t2, we return a sign that tells the
caller to indicate the "earlier" one to be emitted, and by returning the
sign that causes the non-empty side to be emitted, we will automatically
cause the entries from the remaining side to be emitted, without
attempting to touch the empty side at all. We can teach
tree_entry_pathcmp() to pretend that an empty tree has an element that
sorts after anything else to achieve this.
Right now we never go to when compared tree descriptors are both
infinity, as this condition is checked in the loop beginning as
finishing criteria, but will do so in the future, when there will be
several parents iterated simultaneously, and some pair of them would run
to the end.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since an earlier "Finally switch over tree descriptors to contain a
pre-parsed entry", we can safely access all tree_desc->entry fields
directly instead of first "extracting" them through
tree_entry_extract.
Use it. The code generated stays the same - only it now visually looks
cleaner.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We moved all action-taking code below show_path() in recent HEAD~~
(tree-diff: move all action-taking code out of compare_tree_entry).
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since previous commit, this function does not compare entry hashes, and
mode are compared fully outside of it. So what it does is compare entry
names and DIR bit in modes. Reflect this in its name.
Add documentation stating the semantics, and move the note about
files/dirs comparison to it.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- let it do only comparison.
This way the code is cleaner and more structured - cmp function only
compares, and the driver takes action based on comparison result.
There should be no change in performance, as effectively, we just move
if series from on place into another, and merge it to was-already-there
same switch/if, so the result is maybe a little bit faster.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does, but we'll be reworking it in the next patch after it won't, and
besides it is better to stick to standard
strcmp/memcmp/base_name_compare/etc... convention, where comparison
function returns <0, =0, >0
Regarding performance, comparing for <0, =0, >0 should be a little bit
faster, than switch, because it is just 1 test-without-immediate
instruction and then up to 3 conditional branches, and in switch you
have up to 3 tests with immediate and up to 3 conditional branches.
No worry, that update_tree_entry(t2) is duplicated for =0 and >0 - it
will be good after we'll be adding support for multiparent walker and
will stay that way.
=0 case goes first, because it happens more often in real diffs - i.e.
paths are the same.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently both compare_tree_entry() and show_entry() invoke opt diff
callbacks (opt->add_remove() and opt->change()), and also they both have
code which decides whether to recurse into sub-tree, and whether to emit
a tree as separate entry if DIFF_OPT_TREE_IN_RECURSIVE is set.
I.e. we have code duplication and logic scattered on two places.
Let's consolidate it - all diff emiting code and recurion logic moves
to show_entry, which is now named as show_path, because it shows diff
for a path, based on up to two tree entries, with actual diff emitting
code being kept in new helper emit_diff() for clarity.
What we have as the result, is that compare_tree_entry is now free from
code with logic for diff generation, and also performance is not
affected as timings for
`git log --raw --no-abbrev --no-renames`
for navy.git and `linux.git v3.10..v3.11`, just like in previous patch,
stay the same.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This configuration variable sets the default for the --full-name option.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't need special code for showing added/removed subtree, because we
can do the same via diff_tree_sha1, just passing NULL for absent tree.
And compared to show_tree(), which was calling show_entry() for every
tree entry, that would lead to the same show_entry() callings:
show_tree(t):
for e in t.entries:
show_entry(e)
diff_tree_sha1(NULL, new): /* the same applies to (old, NULL) */
diff_tree(t1=NULL, t2)
...
if (!t1->size)
show_entry(t2)
...
and possible overhead is negligible, since after the patch, timing for
`git log --raw --no-abbrev --no-renames`
for navy.git and `linux.git v3.10..v3.11` is practically the same.
So let's say goodbye to show_tree() - it removes some code, but also,
and what is important, consolidates more code for showing/recursing into
trees into one place.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is neither used there as input, nor the output written through it, is
used outside.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because if there is, such two tree entries would never be compared as
equal - the code in base_name_compare() explicitly compares modes, if
there is a change for dir bit, even for equal paths, entries would
compare as different.
The code I'm removing here is from 2005 April 262e82b4 (Fix diff-tree
recursion), which pre-dates base_name_compare() introduction in 958ba6c9
(Introduce "base_name_compare()" helper function) by a month.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move code for finding paths for which diff(commit,parent_i) is not-empty
for all parents to separate function - at present we have generic (and
slow) code for this job, which translates 1 n-parent problem to n
1-parent problems and then intersect results, and will be adding another
limited, but faster, paths scanning implementation in the next patch.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Judging from sample outputs and tests nothing changes in diff -c output,
and this change will help later patches, when we'll be refactoring paths
scanning into its own function with several variants - the
show_log_first logic / code will stay common to all of them.
NOTE: only now we have to take care to explicitly not show anything if
parents array is empty, as in fact there are some clients in Git code,
which calls diff_tree_combined() in such a way.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
output by allowing them to allocate space in advance.
-L <start>,<end>:<file>::
-L :<regex>:<file>::
-L :<funcname>:<file>::
Trace the evolution of the line range given by "<start>,<end>"
(or the funcname regex <regex>) within the <file>. You may
(or the function name regex <funcname>) within the <file>. You may
not give any pathspec limiters. This is currently limited to
a walk starting from a single revision, i.e., you may only
give zero or one positive revision arguments.
@ -184,7 +184,13 @@ log.date::
`--date` option.) Defaults to "default", which means to write
dates like `Sat May 8 19:35:34 2010 -0500`.
log.showroot::
log.follow::
If `true`, `git log` will act as if the `--follow` option was used when
a single <path> is given. This has the same limitations as `--follow`,
i.e. it cannot be used to follow multiple files and does not work well
on non-linear history.
log.showRoot::
If `false`, `git log` and related commands will not treat the
initial commit as a big creation event. Any root commits in
`git log -p` output would be shown without a diff attached.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
