Recently, a vulnerability was reported that can lead to an out-of-bounds
write when reading an unreasonably large gitattributes file. The root
cause of this error are multiple integer overflows in different parts of
the code when there are either too many lines, when paths are too long,
when attribute names are too long, or when there are too many attributes
declared for a pattern.
As all of these are related to size, it seems reasonable to restrict the
size of the gitattributes file via git-fsck(1). This allows us to both
stop distributing known-vulnerable objects via common hosting platforms
that have fsck enabled, and users to protect themselves by enabling the
`fetch.fsckObjects` config.
There are basically two checks:
1. We verify that size of the gitattributes file is smaller than
100MB.
2. We verify that the maximum line length does not exceed 2048
bytes.
With the preceding commits, both of these conditions would cause us to
either ignore the complete gitattributes file or blob in the first case,
or the specific line in the second case. Now with these consistency
checks added, we also grow the ability to stop distributing such files
in the first place when `receive.fsckObjects` is enabled.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the checks for gitattributes so that they can be extended more
readily.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In `fsck_finish()` we check all blobs for consistency that we have found
during the tree walk, but that haven't yet been checked. This is only
required for gitmodules right now, but will also be required for a new
check for gitattributes.
Pull out a function `fsck_blobs()` that allows the caller to check a set
of blobs for consistency.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In general, we don't need to validate blob contents as they are opaque
blobs about whose content Git doesn't need to care about. There are some
exceptions though when blobs are linked into trees so that they would be
interpreted by Git. We only have a single such check right now though,
which is the one for gitmodules that has been added in the context of
CVE-2018-11235.
Now we have found another vulnerability with gitattributes that can lead
to out-of-bounds writes and reads. So let's refactor `fsck_blob()` so
that it is more extensible and can check different types of blobs.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both the padding and wrapping formatting directives allow the caller to
specify an integer that ultimately leads to us adding this many chars to
the result buffer. As a consequence, it is trivial to e.g. allocate 2GB
of RAM via a single formatting directive and cause resource exhaustion
on the machine executing this logic. Furthermore, it is debatable
whether there are any sane usecases that require the user to pad data to
2GB boundaries or to indent wrapped data by 2GB.
Restrict the input sizes to 16 kilobytes at a maximum to limit the
amount of bytes that can be requested by the user. This is not meant
as a fix because there are ways to trivially amplify the amount of
data we generate via formatting directives; the real protection is
achieved by the changes in previous steps to catch and avoid integer
wraparound that causes us to under-allocate and access beyond the
end of allocated memory reagions. But having such a limit
significantly helps fuzzing the pretty format, because the fuzzer is
otherwise quite fast to run out-of-memory as it discovers these
formatters.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In `strbuf_utf8_replace`, we preallocate the destination buffer and then
use `memcpy` to copy bytes into it at computed offsets. This feels
rather fragile and is hard to understand at times. Refactor the code to
instead use `strbuf_add` and `strbuf_addstr` so that we can be sure that
there is no possibility to perform an out-of-bounds write.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In `strbuf_utf8_replace()`, we call `utf8_width()` to compute the width
of the current glyph. If the glyph is a control character though it can
be that `utf8_width()` returns `-1`, but because we assign this value to
a `size_t` the conversion will cause us to underflow. This bug can
easily be triggered with the following command:
$ git log --pretty='format:xxx%<|(1,trunc)%x10'
>From all I can see though this seems to be a benign underflow that has
no security-related consequences.
Fix the bug by using an `int` instead. When we see a control character,
we now copy it into the target buffer but don't advance the current
width of the string.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return type of both `utf8_strwidth()` and `utf8_strnwidth()` is
`int`, but we operate on string lengths which are typically of type
`size_t`. This means that when the string is longer than `INT_MAX`, we
will overflow and thus return a negative result.
This can lead to an out-of-bounds write with `--pretty=format:%<1)%B`
and a commit message that is 2^31+1 bytes long:
=================================================================
==26009==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x603000001168 at pc 0x7f95c4e5f427 bp 0x7ffd8541c900 sp 0x7ffd8541c0a8
WRITE of size 2147483649 at 0x603000001168 thread T0
#0 0x7f95c4e5f426 in __interceptor_memcpy /usr/src/debug/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:827
#1 0x5612bbb1068c in format_and_pad_commit pretty.c:1763
#2 0x5612bbb1087a in format_commit_item pretty.c:1801
#3 0x5612bbc33bab in strbuf_expand strbuf.c:429
#4 0x5612bbb110e7 in repo_format_commit_message pretty.c:1869
#5 0x5612bbb12d96 in pretty_print_commit pretty.c:2161
#6 0x5612bba0a4d5 in show_log log-tree.c:781
#7 0x5612bba0d6c7 in log_tree_commit log-tree.c:1117
#8 0x5612bb691ed5 in cmd_log_walk_no_free builtin/log.c:508
#9 0x5612bb69235b in cmd_log_walk builtin/log.c:549
#10 0x5612bb6951a2 in cmd_log builtin/log.c:883
#11 0x5612bb56c993 in run_builtin git.c:466
#12 0x5612bb56d397 in handle_builtin git.c:721
#13 0x5612bb56db07 in run_argv git.c:788
#14 0x5612bb56e8a7 in cmd_main git.c:923
#15 0x5612bb803682 in main common-main.c:57
#16 0x7f95c4c3c28f (/usr/lib/libc.so.6+0x2328f)
#17 0x7f95c4c3c349 in __libc_start_main (/usr/lib/libc.so.6+0x23349)
#18 0x5612bb5680e4 in _start ../sysdeps/x86_64/start.S:115
0x603000001168 is located 0 bytes to the right of 24-byte region [0x603000001150,0x603000001168)
allocated by thread T0 here:
#0 0x7f95c4ebe7ea in __interceptor_realloc /usr/src/debug/gcc/libsanitizer/asan/asan_malloc_linux.cpp:85
#1 0x5612bbcdd556 in xrealloc wrapper.c:136
#2 0x5612bbc310a3 in strbuf_grow strbuf.c:99
#3 0x5612bbc32acd in strbuf_add strbuf.c:298
#4 0x5612bbc33aec in strbuf_expand strbuf.c:418
#5 0x5612bbb110e7 in repo_format_commit_message pretty.c:1869
#6 0x5612bbb12d96 in pretty_print_commit pretty.c:2161
#7 0x5612bba0a4d5 in show_log log-tree.c:781
#8 0x5612bba0d6c7 in log_tree_commit log-tree.c:1117
#9 0x5612bb691ed5 in cmd_log_walk_no_free builtin/log.c:508
#10 0x5612bb69235b in cmd_log_walk builtin/log.c:549
#11 0x5612bb6951a2 in cmd_log builtin/log.c:883
#12 0x5612bb56c993 in run_builtin git.c:466
#13 0x5612bb56d397 in handle_builtin git.c:721
#14 0x5612bb56db07 in run_argv git.c:788
#15 0x5612bb56e8a7 in cmd_main git.c:923
#16 0x5612bb803682 in main common-main.c:57
#17 0x7f95c4c3c28f (/usr/lib/libc.so.6+0x2328f)
SUMMARY: AddressSanitizer: heap-buffer-overflow /usr/src/debug/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:827 in __interceptor_memcpy
Shadow bytes around the buggy address:
0x0c067fff81d0: fd fd fd fa fa fa fd fd fd fa fa fa fd fd fd fa
0x0c067fff81e0: fa fa fd fd fd fd fa fa fd fd fd fd fa fa fd fd
0x0c067fff81f0: fd fa fa fa fd fd fd fa fa fa fd fd fd fa fa fa
0x0c067fff8200: fd fd fd fa fa fa fd fd fd fd fa fa 00 00 00 fa
0x0c067fff8210: fa fa fd fd fd fa fa fa fd fd fd fa fa fa fd fd
=>0x0c067fff8220: fd fa fa fa fd fd fd fa fa fa 00 00 00[fa]fa fa
0x0c067fff8230: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c067fff8240: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c067fff8250: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c067fff8260: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c067fff8270: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
==26009==ABORTING
Now the proper fix for this would be to convert both functions to return
an `size_t` instead of an `int`. But given that this commit may be part
of a security release, let's instead do the minimal viable fix and die
in case we see an overflow.
Add a test that would have previously caused us to crash.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `utf8_strnwidth()` function calls `utf8_width()` in a loop and adds
its returned width to the end result. `utf8_width()` can return `-1`
though in case it reads a control character, which means that the
computed string width is going to be wrong. In the worst case where
there are more control characters than non-control characters, we may
even return a negative string width.
Fix this bug by treating control characters as having zero width.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `utf8_strnwidth()` function accepts an optional string length as
input parameter. This parameter can either be set to `-1`, in which case
we call `strlen()` on the input. Or it can be set to a positive integer
that indicates a precomputed length, which callers typically compute by
calling `strlen()` at some point themselves.
The input parameter is an `int` though, whereas `strlen()` returns a
`size_t`. This can lead to implementation-defined behaviour though when
the `size_t` cannot be represented by the `int`. In the general case
though this leads to wrap-around and thus to negative string sizes,
which is sure enough to not lead to well-defined behaviour.
Fix this by accepting a `size_t` instead of an `int` as string length.
While this takes away the ability of callers to simply pass in `-1` as
string length, it really is trivial enough to convert them to instead
pass in `strlen()` instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `%w(width,indent1,indent2)` formatting directive can be used to
rewrap text to a specific width and is designed after git-shortlog(1)'s
`-w` parameter. While the three parameters are all stored as `size_t`
internally, `strbuf_add_wrapped_text()` accepts integers as input. As a
result, the casted integers may overflow. As these now-negative integers
are later on passed to `strbuf_addchars()`, we will ultimately run into
implementation-defined behaviour due to casting a negative number back
to `size_t` again. On my platform, this results in trying to allocate
9000 petabyte of memory.
Fix this overflow by using `cast_size_t_to_int()` so that we reject
inputs that cannot be represented as an integer.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a formatting directive has a `+` or ` ` after the `%`, then we add
either a line feed or space if the placeholder expands to a non-empty
string. In specific cases though this logic doesn't work as expected,
and we try to add the character even in the case where the formatting
directive is empty.
One such pattern is `%w(1)%+d%+w(2)`. `%+d` expands to reference names
pointing to a certain commit, like in `git log --decorate`. For a tagged
commit this would for example expand to `\n (tag: v1.0.0)`, which has a
leading newline due to the `+` modifier and a space added by `%d`. Now
the second wrapping directive will cause us to rewrap the text to
`\n(tag:\nv1.0.0)`, which is one byte shorter due to the missing leading
space. The code that handles the `+` magic now notices that the length
has changed and will thus try to insert a leading line feed at the
original posititon. But as the string was shortened, the original
position is past the buffer's boundary and thus we die with an error.
Now there are two issues here:
1. We check whether the buffer length has changed, not whether it
has been extended. This causes us to try and add the character
past the string boundary.
2. The current logic does not make any sense whatsoever. When the
string got expanded due to the rewrap, putting the separator into
the original position is likely to put it somewhere into the
middle of the rewrapped contents.
It is debatable whether `%+w()` makes any sense in the first place.
Strictly speaking, the placeholder never expands to a non-empty string,
and consequentially we shouldn't ever accept this combination. We thus
fix the bug by simply refusing `%+w()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An out-of-bounds read can be triggered when parsing an incomplete
padding format string passed via `--pretty=format` or in Git archives
when files are marked with the `export-subst` gitattribute.
This bug exists since we have introduced support for truncating output
via the `trunc` keyword a7f01c6b4d (pretty: support truncating in %>, %<
and %><, 2013-04-19). Before this commit, we used to find the end of the
formatting string by using strchr(3P). This function returns a `NULL`
pointer in case the character in question wasn't found. The subsequent
check whether any character was found thus simply checked the returned
pointer. After the commit we switched to strcspn(3P) though, which only
returns the offset to the first found character or to the trailing NUL
byte. As the end pointer is now computed by adding the offset to the
start pointer it won't be `NULL` anymore, and as a consequence the check
doesn't do anything anymore.
The out-of-bounds data that is being read can in fact end up in the
formatted string. As a consequence, it is possible to leak memory
contents either by calling git-log(1) or via git-archive(1) when any of
the archived files is marked with the `export-subst` gitattribute.
==10888==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x602000000398 at pc 0x7f0356047cb2 bp 0x7fff3ffb95d0 sp 0x7fff3ffb8d78
READ of size 1 at 0x602000000398 thread T0
#0 0x7f0356047cb1 in __interceptor_strchrnul /usr/src/debug/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:725
#1 0x563b7cec9a43 in strbuf_expand strbuf.c:417
#2 0x563b7cda7060 in repo_format_commit_message pretty.c:1869
#3 0x563b7cda8d0f in pretty_print_commit pretty.c:2161
#4 0x563b7cca04c8 in show_log log-tree.c:781
#5 0x563b7cca36ba in log_tree_commit log-tree.c:1117
#6 0x563b7c927ed5 in cmd_log_walk_no_free builtin/log.c:508
#7 0x563b7c92835b in cmd_log_walk builtin/log.c:549
#8 0x563b7c92b1a2 in cmd_log builtin/log.c:883
#9 0x563b7c802993 in run_builtin git.c:466
#10 0x563b7c803397 in handle_builtin git.c:721
#11 0x563b7c803b07 in run_argv git.c:788
#12 0x563b7c8048a7 in cmd_main git.c:923
#13 0x563b7ca99682 in main common-main.c:57
#14 0x7f0355e3c28f (/usr/lib/libc.so.6+0x2328f)
#15 0x7f0355e3c349 in __libc_start_main (/usr/lib/libc.so.6+0x23349)
#16 0x563b7c7fe0e4 in _start ../sysdeps/x86_64/start.S:115
0x602000000398 is located 0 bytes to the right of 8-byte region [0x602000000390,0x602000000398)
allocated by thread T0 here:
#0 0x7f0356072faa in __interceptor_strdup /usr/src/debug/gcc/libsanitizer/asan/asan_interceptors.cpp:439
#1 0x563b7cf7317c in xstrdup wrapper.c:39
#2 0x563b7cd9a06a in save_user_format pretty.c:40
#3 0x563b7cd9b3e5 in get_commit_format pretty.c:173
#4 0x563b7ce54ea0 in handle_revision_opt revision.c:2456
#5 0x563b7ce597c9 in setup_revisions revision.c:2850
#6 0x563b7c9269e0 in cmd_log_init_finish builtin/log.c:269
#7 0x563b7c927362 in cmd_log_init builtin/log.c:348
#8 0x563b7c92b193 in cmd_log builtin/log.c:882
#9 0x563b7c802993 in run_builtin git.c:466
#10 0x563b7c803397 in handle_builtin git.c:721
#11 0x563b7c803b07 in run_argv git.c:788
#12 0x563b7c8048a7 in cmd_main git.c:923
#13 0x563b7ca99682 in main common-main.c:57
#14 0x7f0355e3c28f (/usr/lib/libc.so.6+0x2328f)
#15 0x7f0355e3c349 in __libc_start_main (/usr/lib/libc.so.6+0x23349)
#16 0x563b7c7fe0e4 in _start ../sysdeps/x86_64/start.S:115
SUMMARY: AddressSanitizer: heap-buffer-overflow /usr/src/debug/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:725 in __interceptor_strchrnul
Shadow bytes around the buggy address:
0x0c047fff8020: fa fa fd fd fa fa 00 06 fa fa 05 fa fa fa fd fd
0x0c047fff8030: fa fa 00 02 fa fa 06 fa fa fa 05 fa fa fa fd fd
0x0c047fff8040: fa fa 00 07 fa fa 03 fa fa fa fd fd fa fa 00 00
0x0c047fff8050: fa fa 00 01 fa fa fd fd fa fa 00 00 fa fa 00 01
0x0c047fff8060: fa fa 00 06 fa fa 00 06 fa fa 05 fa fa fa 05 fa
=>0x0c047fff8070: fa fa 00[fa]fa fa fd fa fa fa fd fd fa fa fd fd
0x0c047fff8080: fa fa fd fd fa fa 00 00 fa fa 00 fa fa fa fd fa
0x0c047fff8090: fa fa fd fd fa fa 00 00 fa fa fa fa fa fa fa fa
0x0c047fff80a0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c047fff80b0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c047fff80c0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
==10888==ABORTING
Fix this bug by checking whether `end` points at the trailing NUL byte.
Add a test which catches this out-of-bounds read and which demonstrates
that we used to write out-of-bounds data into the formatted message.
Reported-by: Markus Vervier <markus.vervier@x41-dsec.de>
Original-patch-by: Markus Vervier <markus.vervier@x41-dsec.de>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the `%>>(<N>)` pretty formatter, you can ask git-log(1) et al to
steal spaces. To do so we need to look ahead of the next token to see
whether there are spaces there. This loop takes into account ANSI
sequences that end with an `m`, and if it finds any it will skip them
until it finds the first space. While doing so it does not take into
account the buffer's limits though and easily does an out-of-bounds
read.
Add a test that hits this behaviour. While we don't have an easy way to
verify this, the test causes the following failure when run with
`SANITIZE=address`:
==37941==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x603000000baf at pc 0x55ba6f88e0d0 bp 0x7ffc84c50d20 sp 0x7ffc84c50d10
READ of size 1 at 0x603000000baf thread T0
#0 0x55ba6f88e0cf in format_and_pad_commit pretty.c:1712
#1 0x55ba6f88e7b4 in format_commit_item pretty.c:1801
#2 0x55ba6f9b1ae4 in strbuf_expand strbuf.c:429
#3 0x55ba6f88f020 in repo_format_commit_message pretty.c:1869
#4 0x55ba6f890ccf in pretty_print_commit pretty.c:2161
#5 0x55ba6f7884c8 in show_log log-tree.c:781
#6 0x55ba6f78b6ba in log_tree_commit log-tree.c:1117
#7 0x55ba6f40fed5 in cmd_log_walk_no_free builtin/log.c:508
#8 0x55ba6f41035b in cmd_log_walk builtin/log.c:549
#9 0x55ba6f4131a2 in cmd_log builtin/log.c:883
#10 0x55ba6f2ea993 in run_builtin git.c:466
#11 0x55ba6f2eb397 in handle_builtin git.c:721
#12 0x55ba6f2ebb07 in run_argv git.c:788
#13 0x55ba6f2ec8a7 in cmd_main git.c:923
#14 0x55ba6f581682 in main common-main.c:57
#15 0x7f2d08c3c28f (/usr/lib/libc.so.6+0x2328f)
#16 0x7f2d08c3c349 in __libc_start_main (/usr/lib/libc.so.6+0x23349)
#17 0x55ba6f2e60e4 in _start ../sysdeps/x86_64/start.S:115
0x603000000baf is located 1 bytes to the left of 24-byte region [0x603000000bb0,0x603000000bc8)
allocated by thread T0 here:
#0 0x7f2d08ebe7ea in __interceptor_realloc /usr/src/debug/gcc/libsanitizer/asan/asan_malloc_linux.cpp:85
#1 0x55ba6fa5b494 in xrealloc wrapper.c:136
#2 0x55ba6f9aefdc in strbuf_grow strbuf.c:99
#3 0x55ba6f9b0a06 in strbuf_add strbuf.c:298
#4 0x55ba6f9b1a25 in strbuf_expand strbuf.c:418
#5 0x55ba6f88f020 in repo_format_commit_message pretty.c:1869
#6 0x55ba6f890ccf in pretty_print_commit pretty.c:2161
#7 0x55ba6f7884c8 in show_log log-tree.c:781
#8 0x55ba6f78b6ba in log_tree_commit log-tree.c:1117
#9 0x55ba6f40fed5 in cmd_log_walk_no_free builtin/log.c:508
#10 0x55ba6f41035b in cmd_log_walk builtin/log.c:549
#11 0x55ba6f4131a2 in cmd_log builtin/log.c:883
#12 0x55ba6f2ea993 in run_builtin git.c:466
#13 0x55ba6f2eb397 in handle_builtin git.c:721
#14 0x55ba6f2ebb07 in run_argv git.c:788
#15 0x55ba6f2ec8a7 in cmd_main git.c:923
#16 0x55ba6f581682 in main common-main.c:57
#17 0x7f2d08c3c28f (/usr/lib/libc.so.6+0x2328f)
#18 0x7f2d08c3c349 in __libc_start_main (/usr/lib/libc.so.6+0x23349)
#19 0x55ba6f2e60e4 in _start ../sysdeps/x86_64/start.S:115
SUMMARY: AddressSanitizer: heap-buffer-overflow pretty.c:1712 in format_and_pad_commit
Shadow bytes around the buggy address:
0x0c067fff8120: fa fa fd fd fd fa fa fa fd fd fd fa fa fa fd fd
0x0c067fff8130: fd fd fa fa fd fd fd fd fa fa fd fd fd fa fa fa
0x0c067fff8140: fd fd fd fa fa fa fd fd fd fa fa fa fd fd fd fa
0x0c067fff8150: fa fa fd fd fd fd fa fa 00 00 00 fa fa fa fd fd
0x0c067fff8160: fd fa fa fa fd fd fd fa fa fa fd fd fd fa fa fa
=>0x0c067fff8170: fd fd fd fa fa[fa]00 00 00 fa fa fa 00 00 00 fa
0x0c067fff8180: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c067fff8190: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c067fff81a0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c067fff81b0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c067fff81c0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
Luckily enough, this would only cause us to copy the out-of-bounds data
into the formatted commit in case we really had an ANSI sequence
preceding our buffer. So this bug likely has no security consequences.
Fix it regardless by not traversing past the buffer's start.
Reported-by: Patrick Steinhardt <ps@pks.im>
Reported-by: Eric Sesterhenn <eric.sesterhenn@x41-dsec.de>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using a padding specifier in the pretty format passed to git-log(1)
we need to calculate the string length in several places. These string
lengths are stored in `int`s though, which means that these can easily
overflow when the input lengths exceeds 2GB. This can ultimately lead to
an out-of-bounds write when these are used in a call to memcpy(3P):
==8340==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7f1ec62f97fe at pc 0x7f2127e5f427 bp 0x7ffd3bd63de0 sp 0x7ffd3bd63588
WRITE of size 1 at 0x7f1ec62f97fe thread T0
#0 0x7f2127e5f426 in __interceptor_memcpy /usr/src/debug/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:827
#1 0x5628e96aa605 in format_and_pad_commit pretty.c:1762
#2 0x5628e96aa7f4 in format_commit_item pretty.c:1801
#3 0x5628e97cdb24 in strbuf_expand strbuf.c:429
#4 0x5628e96ab060 in repo_format_commit_message pretty.c:1869
#5 0x5628e96acd0f in pretty_print_commit pretty.c:2161
#6 0x5628e95a44c8 in show_log log-tree.c:781
#7 0x5628e95a76ba in log_tree_commit log-tree.c:1117
#8 0x5628e922bed5 in cmd_log_walk_no_free builtin/log.c:508
#9 0x5628e922c35b in cmd_log_walk builtin/log.c:549
#10 0x5628e922f1a2 in cmd_log builtin/log.c:883
#11 0x5628e9106993 in run_builtin git.c:466
#12 0x5628e9107397 in handle_builtin git.c:721
#13 0x5628e9107b07 in run_argv git.c:788
#14 0x5628e91088a7 in cmd_main git.c:923
#15 0x5628e939d682 in main common-main.c:57
#16 0x7f2127c3c28f (/usr/lib/libc.so.6+0x2328f)
#17 0x7f2127c3c349 in __libc_start_main (/usr/lib/libc.so.6+0x23349)
#18 0x5628e91020e4 in _start ../sysdeps/x86_64/start.S:115
0x7f1ec62f97fe is located 2 bytes to the left of 4831838265-byte region [0x7f1ec62f9800,0x7f1fe62f9839)
allocated by thread T0 here:
#0 0x7f2127ebe7ea in __interceptor_realloc /usr/src/debug/gcc/libsanitizer/asan/asan_malloc_linux.cpp:85
#1 0x5628e98774d4 in xrealloc wrapper.c:136
#2 0x5628e97cb01c in strbuf_grow strbuf.c:99
#3 0x5628e97ccd42 in strbuf_addchars strbuf.c:327
#4 0x5628e96aa55c in format_and_pad_commit pretty.c:1761
#5 0x5628e96aa7f4 in format_commit_item pretty.c:1801
#6 0x5628e97cdb24 in strbuf_expand strbuf.c:429
#7 0x5628e96ab060 in repo_format_commit_message pretty.c:1869
#8 0x5628e96acd0f in pretty_print_commit pretty.c:2161
#9 0x5628e95a44c8 in show_log log-tree.c:781
#10 0x5628e95a76ba in log_tree_commit log-tree.c:1117
#11 0x5628e922bed5 in cmd_log_walk_no_free builtin/log.c:508
#12 0x5628e922c35b in cmd_log_walk builtin/log.c:549
#13 0x5628e922f1a2 in cmd_log builtin/log.c:883
#14 0x5628e9106993 in run_builtin git.c:466
#15 0x5628e9107397 in handle_builtin git.c:721
#16 0x5628e9107b07 in run_argv git.c:788
#17 0x5628e91088a7 in cmd_main git.c:923
#18 0x5628e939d682 in main common-main.c:57
#19 0x7f2127c3c28f (/usr/lib/libc.so.6+0x2328f)
#20 0x7f2127c3c349 in __libc_start_main (/usr/lib/libc.so.6+0x23349)
#21 0x5628e91020e4 in _start ../sysdeps/x86_64/start.S:115
SUMMARY: AddressSanitizer: heap-buffer-overflow /usr/src/debug/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:827 in __interceptor_memcpy
Shadow bytes around the buggy address:
0x0fe458c572a0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0fe458c572b0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0fe458c572c0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0fe458c572d0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0fe458c572e0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
=>0x0fe458c572f0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa[fa]
0x0fe458c57300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0fe458c57310: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0fe458c57320: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0fe458c57330: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0fe458c57340: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
==8340==ABORTING
The pretty format can also be used in `git archive` operations via the
`export-subst` attribute. So this is what in our opinion makes this a
critical issue in the context of Git forges which allow to download an
archive of user supplied Git repositories.
Fix this vulnerability by using `size_t` instead of `int` to track the
string lengths. Add tests which detect this vulnerability when Git is
compiled with the address sanitizer.
Reported-by: Joern Schneeweisz <jschneeweisz@gitlab.com>
Original-patch-by: Joern Schneeweisz <jschneeweisz@gitlab.com>
Modified-by: Taylor Blau <me@ttalorr.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow tests that assume a 64-bit `size_t` to be skipped in 32-bit
platforms and regardless of the size of `long`.
This imitates the `LONG_IS_64BIT` prerequisite.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar as with the preceding commit, start ignoring gitattributes files
that are overly large to protect us against out-of-bounds reads and
writes caused by integer overflows. Unfortunately, we cannot just define
"overly large" in terms of any preexisting limits in the codebase.
Instead, we choose a very conservative limit of 100MB. This is plenty of
room for specifying gitattributes, and incidentally it is also the limit
for blob sizes for GitHub. While we don't want GitHub to dictate limits
here, it is still sensible to use this fact for an informed decision
given that it is hosting a huge set of repositories. Furthermore, over
at GitLab we scanned a subset of repositories for their root-level
attribute files. We found that 80% of them have a gitattributes file
smaller than 100kB, 99.99% have one smaller than 1MB, and only a single
repository had one that was almost 3MB in size. So enforcing a limit of
100MB seems to give us ample of headroom.
With this limit in place we can be reasonably sure that there is no easy
way to exploit the gitattributes file via integer overflows anymore.
Furthermore, it protects us against resource exhaustion caused by
allocating the in-memory data structures required to represent the
parsed attributes.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two different code paths to read gitattributes: once via a
file, and once via the index. These two paths used to behave differently
because when reading attributes from a file, we used fgets(3P) with a
buffer size of 2kB. Consequentially, we silently truncate line lengths
when lines are longer than that and will then parse the remainder of the
line as a new pattern. It goes without saying that this is entirely
unexpected, but it's even worse that the behaviour depends on how the
gitattributes are parsed.
While this is simply wrong, the silent truncation saves us with the
recently discovered vulnerabilities that can cause out-of-bound writes
or reads with unreasonably long lines due to integer overflows. As the
common path is to read gitattributes via the worktree file instead of
via the index, we can assume that any gitattributes file that had lines
longer than that is already broken anyway. So instead of lifting the
limit here, we can double down on it to fix the vulnerabilities.
Introduce an explicit line length limit of 2kB that is shared across all
paths that read attributes and ignore any line that hits this limit
while printing a warning.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reading attributes from a file we use fgets(3P) with a buffer size
of 2048 bytes. This means that as soon as a line exceeds the buffer size
we split it up into multiple parts and parse each of them as a separate
pattern line. This is of course not what the user intended, and even
worse the behaviour is inconsistent with how we read attributes from the
index.
Fix this bug by converting the code to use `strbuf_getline()` instead.
This will indeed read in the whole line, which may theoretically lead to
an out-of-memory situation when the gitattributes file is huge. We're
about to reject any gitattributes files larger than 100MB in the next
commit though, which makes this less of a concern.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing an attributes line, we need to allocate an array that holds
all attributes specified for the given file pattern. The calculation to
determine the number of bytes that need to be allocated was prone to an
overflow though when there was an unreasonable amount of attributes.
Harden the allocation by instead using the `st_` helper functions that
cause us to die when we hit an integer overflow.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Attributes have a field that tracks the position in the `all_attrs`
array they're stored inside. This field gets set via `hashmap_get_size`
when adding the attribute to the global map of attributes. But while the
field is of type `int`, the value returned by `hashmap_get_size` is an
`unsigned int`. It can thus happen that the value overflows, where we
would now dereference teh `all_attrs` array at an out-of-bounds value.
We do have a sanity check for this overflow via an assert that verifies
the index matches the new hashmap's size. But asserts are not a proper
mechanism to detect against any such overflows as they may not in fact
be compiled into production code.
Fix this by using an `unsigned int` to track the index and convert the
assert to a call `die()`.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `struct attr_stack` tracks the stack of all patterns together with
their attributes. When parsing a gitattributes file that has more than
2^31 such patterns though we may trigger multiple out-of-bounds reads on
64 bit platforms. This is because while the `num_matches` variable is an
unsigned integer, we always use a signed integer to iterate over them.
I have not been able to reproduce this issue due to memory constraints
on my systems. But despite the out-of-bounds reads, the worst thing that
can seemingly happen is to call free(3P) with a garbage pointer when
calling `attr_stack_free()`.
Fix this bug by using unsigned integers to iterate over the array. While
this makes the iteration somewhat awkward when iterating in reverse, it
is at least better than knowingly running into an out-of-bounds read.
While at it, convert the call to `ALLOC_GROW` to use `ALLOC_GROW_BY`
instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible to trigger an integer overflow when parsing attribute
names when there are more than 2^31 of them for a single pattern. This
can either lead to us dying due to trying to request too many bytes:
blob=$(perl -e 'print "f" . " a=" x 2147483649' | git hash-object -w --stdin)
git update-index --add --cacheinfo 100644,$blob,.gitattributes
git attr-check --all file
=================================================================
==1022==ERROR: AddressSanitizer: requested allocation size 0xfffffff800000032 (0xfffffff800001038 after adjustments for alignment, red zones etc.) exceeds maximum supported size of 0x10000000000 (thread T0)
#0 0x7fd3efabf411 in __interceptor_calloc /usr/src/debug/gcc/libsanitizer/asan/asan_malloc_linux.cpp:77
#1 0x5563a0a1e3d3 in xcalloc wrapper.c:150
#2 0x5563a058d005 in parse_attr_line attr.c:384
#3 0x5563a058e661 in handle_attr_line attr.c:660
#4 0x5563a058eddb in read_attr_from_index attr.c:769
#5 0x5563a058ef12 in read_attr attr.c:797
#6 0x5563a058f24c in bootstrap_attr_stack attr.c:867
#7 0x5563a058f4a3 in prepare_attr_stack attr.c:902
#8 0x5563a05905da in collect_some_attrs attr.c:1097
#9 0x5563a059093d in git_all_attrs attr.c:1128
#10 0x5563a02f636e in check_attr builtin/check-attr.c:67
#11 0x5563a02f6c12 in cmd_check_attr builtin/check-attr.c:183
#12 0x5563a02aa993 in run_builtin git.c:466
#13 0x5563a02ab397 in handle_builtin git.c:721
#14 0x5563a02abb2b in run_argv git.c:788
#15 0x5563a02ac991 in cmd_main git.c:926
#16 0x5563a05432bd in main common-main.c:57
#17 0x7fd3ef82228f (/usr/lib/libc.so.6+0x2328f)
==1022==HINT: if you don't care about these errors you may set allocator_may_return_null=1
SUMMARY: AddressSanitizer: allocation-size-too-big /usr/src/debug/gcc/libsanitizer/asan/asan_malloc_linux.cpp:77 in __interceptor_calloc
==1022==ABORTING
Or, much worse, it can lead to an out-of-bounds write because we
underallocate and then memcpy(3P) into an array:
perl -e '
print "A " . "\rh="x2000000000;
print "\rh="x2000000000;
print "\rh="x294967294 . "\n"
' >.gitattributes
git add .gitattributes
git commit -am "evil attributes"
$ git clone --quiet /path/to/repo
=================================================================
==15062==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x602000002550 at pc 0x5555559884d5 bp 0x7fffffffbc60 sp 0x7fffffffbc58
WRITE of size 8 at 0x602000002550 thread T0
#0 0x5555559884d4 in parse_attr_line attr.c:393
#1 0x5555559884d4 in handle_attr_line attr.c:660
#2 0x555555988902 in read_attr_from_index attr.c:784
#3 0x555555988902 in read_attr_from_index attr.c:747
#4 0x555555988a1d in read_attr attr.c:800
#5 0x555555989b0c in bootstrap_attr_stack attr.c:882
#6 0x555555989b0c in prepare_attr_stack attr.c:917
#7 0x555555989b0c in collect_some_attrs attr.c:1112
#8 0x55555598b141 in git_check_attr attr.c:1126
#9 0x555555a13004 in convert_attrs convert.c:1311
#10 0x555555a95e04 in checkout_entry_ca entry.c:553
#11 0x555555d58bf6 in checkout_entry entry.h:42
#12 0x555555d58bf6 in check_updates unpack-trees.c:480
#13 0x555555d5eb55 in unpack_trees unpack-trees.c:2040
#14 0x555555785ab7 in checkout builtin/clone.c:724
#15 0x555555785ab7 in cmd_clone builtin/clone.c:1384
#16 0x55555572443c in run_builtin git.c:466
#17 0x55555572443c in handle_builtin git.c:721
#18 0x555555727872 in run_argv git.c:788
#19 0x555555727872 in cmd_main git.c:926
#20 0x555555721fa0 in main common-main.c:57
#21 0x7ffff73f1d09 in __libc_start_main ../csu/libc-start.c:308
#22 0x555555723f39 in _start (git+0x1cff39)
0x602000002552 is located 0 bytes to the right of 2-byte region [0x602000002550,0x602000002552) allocated by thread T0 here:
#0 0x7ffff768c037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x555555d7fff7 in xcalloc wrapper.c:150
#2 0x55555598815f in parse_attr_line attr.c:384
#3 0x55555598815f in handle_attr_line attr.c:660
#4 0x555555988902 in read_attr_from_index attr.c:784
#5 0x555555988902 in read_attr_from_index attr.c:747
#6 0x555555988a1d in read_attr attr.c:800
#7 0x555555989b0c in bootstrap_attr_stack attr.c:882
#8 0x555555989b0c in prepare_attr_stack attr.c:917
#9 0x555555989b0c in collect_some_attrs attr.c:1112
#10 0x55555598b141 in git_check_attr attr.c:1126
#11 0x555555a13004 in convert_attrs convert.c:1311
#12 0x555555a95e04 in checkout_entry_ca entry.c:553
#13 0x555555d58bf6 in checkout_entry entry.h:42
#14 0x555555d58bf6 in check_updates unpack-trees.c:480
#15 0x555555d5eb55 in unpack_trees unpack-trees.c:2040
#16 0x555555785ab7 in checkout builtin/clone.c:724
#17 0x555555785ab7 in cmd_clone builtin/clone.c:1384
#18 0x55555572443c in run_builtin git.c:466
#19 0x55555572443c in handle_builtin git.c:721
#20 0x555555727872 in run_argv git.c:788
#21 0x555555727872 in cmd_main git.c:926
#22 0x555555721fa0 in main common-main.c:57
#23 0x7ffff73f1d09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: heap-buffer-overflow attr.c:393 in parse_attr_line
Shadow bytes around the buggy address:
0x0c047fff8450: fa fa 00 02 fa fa 00 07 fa fa fd fd fa fa 00 00
0x0c047fff8460: fa fa 02 fa fa fa fd fd fa fa 00 06 fa fa 05 fa
0x0c047fff8470: fa fa fd fd fa fa 00 02 fa fa 06 fa fa fa 05 fa
0x0c047fff8480: fa fa 07 fa fa fa fd fd fa fa 00 01 fa fa 00 02
0x0c047fff8490: fa fa 00 03 fa fa 00 fa fa fa 00 01 fa fa 00 03
=>0x0c047fff84a0: fa fa 00 01 fa fa 00 02 fa fa[02]fa fa fa fa fa
0x0c047fff84b0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c047fff84c0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c047fff84d0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c047fff84e0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c047fff84f0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
Shadow gap: cc
==15062==ABORTING
Fix this bug by using `size_t` instead to count the number of attributes
so that this value cannot reasonably overflow without running out of
memory before already.
Reported-by: Markus Vervier <markus.vervier@x41-dsec.de>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible to trigger an integer overflow when parsing attribute
names that are longer than 2^31 bytes because we assign the result of
strlen(3P) to an `int` instead of to a `size_t`. This can lead to an
abort in vsnprintf(3P) with the following reproducer:
blob=$(perl -e 'print "A " . "B"x2147483648 . "\n"' | git hash-object -w --stdin)
git update-index --add --cacheinfo 100644,$blob,.gitattributes
git check-attr --all path
BUG: strbuf.c:400: your vsnprintf is broken (returned -1)
But furthermore, assuming that the attribute name is even longer than
that, it can cause us to silently truncate the attribute and thus lead
to wrong results.
Fix this integer overflow by using a `size_t` instead. This fixes the
silent truncation of attribute names, but it only partially fixes the
BUG we hit: even though the initial BUG is fixed, we can still hit a BUG
when parsing invalid attribute lines via `report_invalid_attr()`.
This is due to an underlying design issue in vsnprintf(3P) which only
knows to return an `int`, and thus it may always overflow with large
inputs. This issue is benign though: the worst that can happen is that
the error message is misreported to be either truncated or too long, but
due to the buffer being NUL terminated we wouldn't ever do an
out-of-bounds read here.
Reported-by: Markus Vervier <markus.vervier@x41-dsec.de>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is an out-of-bounds read possible when parsing gitattributes that
have an attribute that is 2^31+1 bytes long. This is caused due to an
integer overflow when we assign the result of strlen(3P) to an `int`,
where we use the wrapped-around value in a subsequent call to
memcpy(3P). The following code reproduces the issue:
blob=$(perl -e 'print "a" x 2147483649 . " attr"' | git hash-object -w --stdin)
git update-index --add --cacheinfo 100644,$blob,.gitattributes
git check-attr --all file
AddressSanitizer:DEADLYSIGNAL
=================================================================
==8451==ERROR: AddressSanitizer: SEGV on unknown address 0x7f93efa00800 (pc 0x7f94f1f8f082 bp 0x7ffddb59b3a0 sp 0x7ffddb59ab28 T0)
==8451==The signal is caused by a READ memory access.
#0 0x7f94f1f8f082 (/usr/lib/libc.so.6+0x176082)
#1 0x7f94f2047d9c in __interceptor_strspn /usr/src/debug/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:752
#2 0x560e190f7f26 in parse_attr_line attr.c:375
#3 0x560e190f9663 in handle_attr_line attr.c:660
#4 0x560e190f9ddd in read_attr_from_index attr.c:769
#5 0x560e190f9f14 in read_attr attr.c:797
#6 0x560e190fa24e in bootstrap_attr_stack attr.c:867
#7 0x560e190fa4a5 in prepare_attr_stack attr.c:902
#8 0x560e190fb5dc in collect_some_attrs attr.c:1097
#9 0x560e190fb93f in git_all_attrs attr.c:1128
#10 0x560e18e6136e in check_attr builtin/check-attr.c:67
#11 0x560e18e61c12 in cmd_check_attr builtin/check-attr.c:183
#12 0x560e18e15993 in run_builtin git.c:466
#13 0x560e18e16397 in handle_builtin git.c:721
#14 0x560e18e16b2b in run_argv git.c:788
#15 0x560e18e17991 in cmd_main git.c:926
#16 0x560e190ae2bd in main common-main.c:57
#17 0x7f94f1e3c28f (/usr/lib/libc.so.6+0x2328f)
#18 0x7f94f1e3c349 in __libc_start_main (/usr/lib/libc.so.6+0x23349)
#19 0x560e18e110e4 in _start ../sysdeps/x86_64/start.S:115
AddressSanitizer can not provide additional info.
SUMMARY: AddressSanitizer: SEGV (/usr/lib/libc.so.6+0x176082)
==8451==ABORTING
Fix this bug by converting the variable to a `size_t` instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `git_attr_internal()` is called to upsert attributes into
the global map. And while all callers pass a `size_t`, the function
itself accepts an `int` as the attribute name's length. This can lead to
an integer overflow in case the attribute name is longer than `INT_MAX`.
Now this overflow seems harmless as the first thing we do is to call
`attr_name_valid()`, and that function only succeeds in case all chars
in the range of `namelen` match a certain small set of chars. We thus
can't do an out-of-bounds read as NUL is not part of that set and all
strings passed to this function are NUL-terminated. And furthermore, we
wouldn't ever read past the current attribute name anyway due to the
same reason. And if validation fails we will return early.
On the other hand it feels fragile to rely on this behaviour, even more
so given that we pass `namelen` to `FLEX_ALLOC_MEM()`. So let's instead
just do the correct thing here and accept a `size_t` as line length.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Explicitly cloning over the "file://" protocol in t1092 in preparation
for merging a security release which will change the default value of
this configuration to be "user".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Explicitly cloning over the "file://" protocol in t1092 in preparation
for merging a security release which will change the default value of
this configuration to be "user".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
This function improperly uses an int to represent the number of entries
in the resulting argument array. This allows a malicious actor to
intentionally overflow the return value, leading to arbitrary heap
writes.
Because the resulting argv array is typically passed to execv(), it may
be possible to leverage this attack to gain remote code execution on a
victim machine. This was almost certainly the case for certain
configurations of git-shell until the previous commit limited the size
of input it would accept. Other calls to split_cmdline() are typically
limited by the size of argv the OS is willing to hand us, so are
similarly protected.
So this is not strictly fixing a known vulnerability, but is a hardening
of the function that is worth doing to protect against possible unknown
vulnerabilities.
One approach to fixing this would be modifying the signature of
`split_cmdline()` to look something like:
int split_cmdline(char *cmdline, const char ***argv, size_t *argc);
Where the return value of `split_cmdline()` is negative for errors, and
zero otherwise. If non-NULL, the `*argc` pointer is modified to contain
the size of the `**argv` array.
But this implies an absurdly large `argv` array, which more than likely
larger than the system's argument limit. So even if split_cmdline()
allowed this, it would fail immediately afterwards when we called
execv(). So instead of converting all of `split_cmdline()`'s callers to
work with `size_t` types in this patch, instead pursue the minimal fix
here to prevent ever returning an array with more than INT_MAX entries
in it.
Signed-off-by: Kevin Backhouse <kevinbackhouse@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When git-shell is run in interactive mode (which must be enabled by
creating $HOME/git-shell-commands), it reads commands from stdin, one
per line, and executes them.
We read the commands with git_read_line_interactively(), which uses a
strbuf under the hood. That means we'll accept an input of arbitrary
size (limited only by how much heap we can allocate). That creates two
problems:
- the rest of the code is not prepared to handle large inputs. The
most serious issue here is that split_cmdline() uses "int" for most
of its types, which can lead to integer overflow and out-of-bounds
array reads and writes. But even with that fixed, we assume that we
can feed the command name to snprintf() (via xstrfmt()), which is
stuck for historical reasons using "int", and causes it to fail (and
even trigger a BUG() call).
- since the point of git-shell is to take input from untrusted or
semi-trusted clients, it's a mild denial-of-service. We'll allocate
as many bytes as the client sends us (actually twice as many, since
we immediately duplicate the buffer).
We can fix both by just limiting the amount of per-command input we're
willing to receive.
We should also fix split_cmdline(), of course, which is an accident
waiting to happen, but that can come on top. Most calls to
split_cmdline(), including the other one in git-shell, are OK because
they are reading from an OS-provided argv, which is limited in practice.
This patch should eliminate the immediate vulnerabilities.
I picked 4MB as an arbitrary limit. It's big enough that nobody should
ever run into it in practice (since the point is to run the commands via
exec, we're subject to OS limits which are typically much lower). But
it's small enough that allocating it isn't that big a deal.
The code is mostly just swapping out fgets() for the strbuf call, but we
have to add a few niceties like flushing and trimming line endings. We
could simplify things further by putting the buffer on the stack, but
4MB is probably a bit much there. Note that we'll _always_ allocate 4MB,
which for normal, non-malicious requests is more than we would before
this patch. But on the other hand, other git programs are happy to use
96MB for a delta cache. And since we'd never touch most of those pages,
on a lazy-allocating OS like Linux they won't even get allocated to
actual RAM.
The ideal would be a version of strbuf_getline() that accepted a maximum
value. But for a minimal vulnerability fix, let's keep things localized
and simple. We can always refactor further on top.
The included test fails in an obvious way with ASan or UBSan (which
notice the integer overflow and out-of-bounds reads). Without them, it
fails in a less obvious way: we may segfault, or we may try to xstrfmt()
a long string, leading to a BUG(). Either way, it fails reliably before
this patch, and passes with it. Note that we don't need an EXPENSIVE
prereq on it. It does take 10-15s to fail before this patch, but with
the new limit, we fail almost immediately (and the perl process
generating 2GB of data exits via SIGPIPE).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
We have no tests of even basic functionality of git-shell. Let's add a
couple of obvious ones. This will serve as a framework for adding tests
for new things we fix, as well as making sure we don't screw anything up
too badly while doing so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
An earlier patch discussed and fixed a scenario where Git could be used
as a vector to exfiltrate sensitive data through a Docker container when
a potential victim clones a suspicious repository with local submodules
that contain symlinks.
That security hole has since been plugged, but a similar one still
exists. Instead of convincing a would-be victim to clone an embedded
submodule via the "file" protocol, an attacker could convince an
individual to clone a repository that has a submodule pointing to a
valid path on the victim's filesystem.
For example, if an individual (with username "foo") has their home
directory ("/home/foo") stored as a Git repository, then an attacker
could exfiltrate data by convincing a victim to clone a malicious
repository containing a submodule pointing at "/home/foo/.git" with
`--recurse-submodules`. Doing so would expose any sensitive contents in
stored in "/home/foo" tracked in Git.
For systems (such as Docker) that consider everything outside of the
immediate top-level working directory containing a Dockerfile as
inaccessible to the container (with the exception of volume mounts, and
so on), this is a violation of trust by exposing unexpected contents in
the working copy.
To mitigate the likelihood of this kind of attack, adjust the "file://"
protocol's default policy to be "user" to prevent commands that execute
without user input (including recursive submodule initialization) from
taking place by default.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
To prepare for the default value of `protocol.file.allow` to change to
"user", ensure tests that rely on local submodules can initialize them
over the file protocol.
Tests that interact with submodules a handful of times use
`test_config_global`.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
To prepare for the default value of `protocol.file.allow` to change to
"user", ensure tests that rely on local submodules can initialize them
over the file protocol.
Tests that only need to interact with submodules in a limited capacity
have individual Git commands annotated with the appropriate
configuration via `-c`. Tests that interact with submodules a handful of
times use `test_config_global` instead. Test scripts that rely on
submodules throughout use a `git config --global` during a setup test
towards the beginning of the script.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
To prepare for the default value of `protocol.file.allow` to change to
"user", ensure tests that rely on local submodules can initialize them
over the file protocol.
Tests that only need to interact with submodules in a limited capacity
have individual Git commands annotated with the appropriate
configuration via `-c`.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
To prepare for the default value of `protocol.file.allow` to change to
"user", ensure tests that rely on local submodules can initialize them
over the file protocol.
Tests that only need to interact with submodules in a limited capacity
have individual Git commands annotated with the appropriate
configuration via `-c`. Tests that interact with submodules a handful of
times use `test_config_global` instead. Test scripts that rely on
submodules throughout use a `git config --global` during a setup test
towards the beginning of the script.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
To prepare for the default value of `protocol.file.allow` to change to
"user", ensure tests that rely on local submodules can initialize them
over the file protocol.
Tests that only need to interact with submodules in a limited capacity
have individual Git commands annotated with the appropriate
configuration via `-c`. Tests that interact with submodules a handful of
times use `test_config_global` instead. Test scripts that rely on
submodules throughout use a `git config --global` during a setup test
towards the beginning of the script.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
To prepare for the default value of `protocol.file.allow` to change to
"user", ensure tests that rely on local submodules can initialize them
over the file protocol.
Tests that only need to interact with submodules in a limited capacity
have individual Git commands annotated with the appropriate
configuration via `-c`. Tests that interact with submodules a handful of
times use `test_config_global` instead. Test scripts that rely on
submodules throughout use a `git config --global` during a setup test
towards the beginning of the script.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
To prepare for the default value of `protocol.file.allow` to change to
"user", ensure tests that rely on local submodules can initialize them
over the file protocol.
Tests that only need to interact with submodules in a limited capacity
have individual Git commands annotated with the appropriate
configuration via `-c`. Tests that interact with submodules a handful of
times use `test_config_global` instead. Test scripts that rely on
submodules throughout use a `git config --global` during a setup test
towards the beginning of the script.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
To prepare for the default value of `protocol.file.allow` to change to
"user", ensure tests that rely on local submodules can initialize them
over the file protocol.
Tests that only need to interact with submodules in a limited capacity
have individual Git commands annotated with the appropriate
configuration via `-c`. Tests that interact with submodules a handful of
times use `test_config_global` instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
To prepare for changing the default value of `protocol.file.allow` to
"user", update the `prolog()` function in lib-submodule-update to allow
submodules to be cloned over the file protocol.
This is used by a handful of submodule-related test scripts, which
themselves will have to tweak the value of `protocol.file.allow` in
certain locations. Those will be done in subsequent commits.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When cloning a repository with `--local`, Git relies on either making a
hardlink or copy to every file in the "objects" directory of the source
repository. This is done through the callpath `cmd_clone()` ->
`clone_local()` -> `copy_or_link_directory()`.
The way this optimization works is by enumerating every file and
directory recursively in the source repository's `$GIT_DIR/objects`
directory, and then either making a copy or hardlink of each file. The
only exception to this rule is when copying the "alternates" file, in
which case paths are rewritten to be absolute before writing a new
"alternates" file in the destination repo.
One quirk of this implementation is that it dereferences symlinks when
cloning. This behavior was most recently modified in 36596fd2df (clone:
better handle symlinked files at .git/objects/, 2019-07-10), which
attempted to support `--local` clones of repositories with symlinks in
their objects directory in a platform-independent way.
Unfortunately, this behavior of dereferencing symlinks (that is,
creating a hardlink or copy of the source's link target in the
destination repository) can be used as a component in attacking a
victim by inadvertently exposing the contents of file stored outside of
the repository.
Take, for example, a repository that stores a Dockerfile and is used to
build Docker images. When building an image, Docker copies the directory
contents into the VM, and then instructs the VM to execute the
Dockerfile at the root of the copied directory. This protects against
directory traversal attacks by copying symbolic links as-is without
dereferencing them.
That is, if a user has a symlink pointing at their private key material
(where the symlink is present in the same directory as the Dockerfile,
but the key itself is present outside of that directory), the key is
unreadable to a Docker image, since the link will appear broken from the
container's point of view.
This behavior enables an attack whereby a victim is convinced to clone a
repository containing an embedded submodule (with a URL like
"file:///proc/self/cwd/path/to/submodule") which has a symlink pointing
at a path containing sensitive information on the victim's machine. If a
user is tricked into doing this, the contents at the destination of
those symbolic links are exposed to the Docker image at runtime.
One approach to preventing this behavior is to recreate symlinks in the
destination repository. But this is problematic, since symlinking the
objects directory are not well-supported. (One potential problem is that
when sharing, e.g. a "pack" directory via symlinks, different writers
performing garbage collection may consider different sets of objects to
be reachable, enabling a situation whereby garbage collecting one
repository may remove reachable objects in another repository).
Instead, prohibit the local clone optimization when any symlinks are
present in the `$GIT_DIR/objects` directory of the source repository.
Users may clone the repository again by prepending the "file://" scheme
to their clone URL, or by adding the `--no-local` option to their `git
clone` invocation.
The directory iterator used by `copy_or_link_directory()` must no longer
dereference symlinks (i.e., it *must* call `lstat()` instead of `stat()`
in order to discover whether or not there are symlinks present). This has
no bearing on the overall behavior, since we will immediately `die()` on
encounter a symlink.
Note that t5604.33 suggests that we do support local clones with
symbolic links in the source repository's objects directory, but this
was likely unintentional, or at least did not take into consideration
the problem with sharing parts of the objects directory with symbolic
links at the time. Update this test to reflect which options are and
aren't supported.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
* maint-2.33:
Git 2.33.4
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.32:
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.31:
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.30:
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
8959555cee (setup_git_directory(): add an owner check for the top-level
directory, 2022-03-02), adds a function to check for ownership of
repositories using a directory that is representative of it, and ways to
add exempt a specific repository from said check if needed, but that
check didn't account for owership of the gitdir, or (when used) the
gitfile that points to that gitdir.
An attacker could create a git repository in a directory that they can
write into but that is owned by the victim to work around the fix that
was introduced with CVE-2022-24765 to potentially run code as the
victim.
An example that could result in privilege escalation to root in *NIX would
be to set a repository in a shared tmp directory by doing (for example):
$ git -C /tmp init
To avoid that, extend the ensure_valid_ownership function to be able to
check for all three paths.
This will have the side effect of tripling the number of stat() calls
when a repository is detected, but the effect is expected to be likely
minimal, as it is done only once during the directory walk in which Git
looks for a repository.
Additionally make sure to resolve the gitfile (if one was used) to find
the relevant gitdir for checking.
While at it change the message printed on failure so it is clear we are
referring to the repository by its worktree (or gitdir if it is bare) and
not to a specific directory.
Helped-by: Junio C Hamano <junio@pobox.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
With a recent update to refuse access to repositories of other
people by default, "sudo make install" and "sudo git describe"
stopped working. This series intends to loosen it while keeping
the safety.
* cb/path-owner-check-with-sudo:
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Previous changes introduced a regression which will prevent root for
accessing repositories owned by thyself if using sudo because SUDO_UID
takes precedence.
Loosen that restriction by allowing root to access repositories owned
by both uid by default and without having to add a safe.directory
exception.
A previous workaround that was documented in the tests is no longer
needed so it has been removed together with its specially crafted
prerequisite.
Helped-by: Johanness Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a support library that provides one function that can be used
to run a "scriplet" of commands through sudo and that helps invoking
sudo in the slightly awkward way that is required to ensure it doesn't
block the call (if shell was allowed as tested in the prerequisite)
and it doesn't run the command through a different shell than the one
we intended.
Add additional negative tests as suggested by Junio and that use a
new workspace that is owned by root.
Document a regression that was introduced by previous commits where
root won't be able anymore to access directories they own unless
SUDO_UID is removed from their environment.
The tests document additional ways that this new restriction could
be worked around and the documentation explains why it might be instead
considered a feature, but a "fix" is planned for a future change.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bdc77d1d68 (Add a function to determine whether a path is owned by the
current user, 2022-03-02) checks for the effective uid of the running
process using geteuid() but didn't account for cases where that user was
root (because git was invoked through sudo or a compatible tool) and the
original uid that repository trusted for its config was no longer known,
therefore failing the following otherwise safe call:
guy@renard ~/Software/uncrustify $ sudo git describe --always --dirty
[sudo] password for guy:
fatal: unsafe repository ('/home/guy/Software/uncrustify' is owned by someone else)
Attempt to detect those cases by using the environment variables that
those tools create to keep track of the original user id, and do the
ownership check using that instead.
This assumes the environment the user is running on after going
privileged can't be tampered with, and also adds code to restrict that
the new behavior only applies if running as root, therefore keeping the
most common case, which runs unprivileged, from changing, but because of
that, it will miss cases where sudo (or an equivalent) was used to change
to another unprivileged user or where the equivalent tool used to raise
privileges didn't track the original id in a sudo compatible way.
Because of compatibility with sudo, the code assumes that uid_t is an
unsigned integer type (which is not required by the standard) but is used
that way in their codebase to generate SUDO_UID. In systems where uid_t
is signed, sudo might be also patched to NOT be unsigned and that might
be able to trigger an edge case and a bug (as described in the code), but
it is considered unlikely to happen and even if it does, the code would
just mostly fail safely, so there was no attempt either to detect it or
prevent it by the code, which is something that might change in the future,
based on expected user feedback.
Reported-by: Guy Maurel <guy.j@maurel.de>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Randall Becker <rsbecker@nexbridge.com>
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Suggested-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally reported after release of v2.35.2 (and other maint branches)
for CVE-2022-24765 and blocking otherwise harmless commands that were
done using sudo in a repository that was owned by the user.
Add a new test script with very basic support to allow running git
commands through sudo, so a reproduction could be implemented and that
uses only `git status` as a proxy of the issue reported.
Note that because of the way sudo interacts with the system, a much
more complete integration with the test framework will require a lot
more work and that was therefore intentionally punted for now.
The current implementation requires the execution of a special cleanup
function which should always be kept as the last "test" or otherwise
the standard cleanup functions will fail because they can't remove
the root owned directories that are used. This also means that if
failures are found while running, the specifics of the failure might
not be kept for further debugging and if the test was interrupted, it
will be necessary to clean the working directory manually before
restarting by running:
$ sudo rm -rf trash\ directory.t0034-root-safe-directory/
The test file also uses at least one initial "setup" test that creates
a parallel execution directory under the "root" sub directory, which
should be used as top level directory for all repositories that are
used in this test file. Unlike all other tests the repository provided
by the test framework should go unused.
Special care should be taken when invoking commands through sudo, since
the environment is otherwise independent from what the test framework
setup and might have changed the values for HOME, SHELL and dropped
several relevant environment variables for your test. Indeed `git status`
was used as a proxy because it doesn't even require commits in the
repository to work and usually doesn't require much from the environment
to run, but a future patch will add calls to `git init` and that will
fail to honor the default branch name, unless that setting is NOT
provided through an environment variable (which means even a CI run
could fail that test if enabled incorrectly).
A new SUDO prerequisite is provided that does some sanity checking
to make sure the sudo command that will be used allows for passwordless
execution as root without restrictions and doesn't mess with git's
execution path. This matches what is provided by the macOS agents that
are used as part of GitHub actions and probably nowhere else.
Most of those characteristics make this test mostly only suitable for
CI, but it might be executed locally if special care is taken to provide
for all of them in the local configuration and maybe making use of the
sudo credential cache by first invoking sudo, entering your password if
needed, and then invoking the test with:
$ GIT_TEST_ALLOW_SUDO=YES ./t0034-root-safe-directory.sh
If it fails to run, then it means your local setup wouldn't work for the
test because of the configuration sudo has or other system settings, and
things that might help are to comment out sudo's secure_path config, and
make sure that the account you are using has no restrictions on the
commands it can run through sudo, just like is provided for the user in
the CI.
For example (assuming a username of marta for you) something probably
similar to the following entry in your /etc/sudoers (or equivalent) file:
marta ALL=(ALL:ALL) NOPASSWD: ALL
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the addition of the safe.directory in 8959555ce
(setup_git_directory(): add an owner check for the top-level directory,
2022-03-02) released in v2.35.2, we are receiving feedback from a
variety of users about the feature.
Some users have a very large list of shared repositories and find it
cumbersome to add this config for every one of them.
In a more difficult case, certain workflows involve running Git commands
within containers. The container boundary prevents any global or system
config from communicating `safe.directory` values from the host into the
container. Further, the container almost always runs as a different user
than the owner of the directory in the host.
To simplify the reactions necessary for these users, extend the
definition of the safe.directory config value to include a possible '*'
value. This value implies that all directories are safe, providing a
single setting to opt-out of this protection.
Note that an empty assignment of safe.directory clears all previous
values, and this is already the case with the "if (!value || !*value)"
condition.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that nothing is ever checking to make sure the safe directories
in the configs actually have the key safe.directory, so some unrelated
config that has a value with a certain directory would also make it a
safe directory.
Signed-off-by: Matheus Valadares <me@m28.io>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is difficult to change the ownership on a directory in our test
suite, so insert a new GIT_TEST_ASSUME_DIFFERENT_OWNER environment
variable to trick Git into thinking we are in a differently-owned
directory. This allows us to test that the config is parsed correctly.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.33:
Git 2.33.2
Git 2.32.1
Git 2.31.2
GIT-VERSION-GEN: bump to v2.33.1
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
* maint-2.32:
Git 2.32.1
Git 2.31.2
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
* maint-2.31:
Git 2.31.2
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
* maint-2.30:
Git 2.30.3
setup_git_directory(): add an owner check for the top-level directory
Add a function to determine whether a path is owned by the current user
When determining the length of the longest ancestor of a given path with
respect to to e.g. `GIT_CEILING_DIRECTORIES`, we special-case the root
directory by returning 0 (i.e. we pretend that the path `/` does not end
in a slash by virtually stripping it).
That is the correct behavior because when normalizing paths, the root
directory is special: all other directory paths have their trailing
slash stripped, but not the root directory's path (because it would
become the empty string, which is not a legal path).
However, this special-casing of the root directory in
`longest_ancestor_length()` completely forgets about Windows-style root
directories, e.g. `C:\`. These _also_ get normalized with a trailing
slash (because `C:` would actually refer to the current directory on
that drive, not necessarily to its root directory).
In fc56c7b34b (mingw: accomodate t0060-path-utils for MSYS2,
2016-01-27), we almost got it right. We noticed that
`longest_ancestor_length()` expects a slash _after_ the matched prefix,
and if the prefix already ends in a slash, the normalized path won't
ever match and -1 is returned.
But then that commit went astray: The correct fix is not to adjust the
_tests_ to expect an incorrect -1 when that function is fed a prefix
that ends in a slash, but instead to treat such a prefix as if the
trailing slash had been removed.
Likewise, that function needs to handle the case where it is fed a path
that ends in a slash (not only a prefix that ends in a slash): if it
matches the prefix (plus trailing slash), we still need to verify that
the path does not end there, otherwise the prefix is not actually an
ancestor of the path but identical to it (and we need to return -1 in
that case).
With these two adjustments, we no longer need to play games in t0060
where we only add `$rootoff` if the passed prefix is different from the
MSYS2 pseudo root, instead we also add it for the MSYS2 pseudo root
itself. We do have to be careful to skip that logic entirely for Windows
paths, though, because they do are not subject to that MSYS2 pseudo root
treatment.
This patch fixes the scenario where a user has set
`GIT_CEILING_DIRECTORIES=C:\`, which would be ignored otherwise.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
It poses a security risk to search for a git directory outside of the
directories owned by the current user.
For example, it is common e.g. in computer pools of educational
institutes to have a "scratch" space: a mounted disk with plenty of
space that is regularly swiped where any authenticated user can create
a directory to do their work. Merely navigating to such a space with a
Git-enabled `PS1` when there is a maliciously-crafted `/scratch/.git/`
can lead to a compromised account.
The same holds true in multi-user setups running Windows, as `C:\` is
writable to every authenticated user by default.
To plug this vulnerability, we stop Git from accepting top-level
directories owned by someone other than the current user. We avoid
looking at the ownership of each and every directories between the
current and the top-level one (if there are any between) to avoid
introducing a performance bottleneck.
This new default behavior is obviously incompatible with the concept of
shared repositories, where we expect the top-level directory to be owned
by only one of its legitimate users. To re-enable that use case, we add
support for adding exceptions from the new default behavior via the
config setting `safe.directory`.
The `safe.directory` config setting is only respected in the system and
global configs, not from repository configs or via the command-line, and
can have multiple values to allow for multiple shared repositories.
We are particularly careful to provide a helpful message to any user
trying to use a shared repository.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This function will be used in the next commit to prevent
`setup_git_directory()` from discovering a repository in a directory
that is owned by someone other than the current user.
Note: We cannot simply use `st.st_uid` on Windows just like we do on
Linux and other Unix-like platforms: according to
https://docs.microsoft.com/en-us/cpp/c-runtime-library/reference/stat-functions
this field is always zero on Windows (because Windows' idea of a user ID
does not fit into a single numerical value). Therefore, we have to do
something a little involved to replicate the same functionality there.
Also note: On Windows, a user's home directory is not actually owned by
said user, but by the administrator. For all practical purposes, it is
under the user's control, though, therefore we pretend that it is owned
by the user.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Build fix on Windows.
* cb/mingw-gmtime-r:
mingw: avoid fallback for {local,gm}time_r()
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
mingw-w64's pthread_unistd.h had a bug that mistakenly (because there is
no support for the *lockfile() functions required[1]) defined
_POSIX_THREAD_SAFE_FUNCTIONS and that was being worked around since
3ecd153a3b (compat/mingw: support MSys2-based MinGW build, 2016-01-14).
The bug was fixed in winphtreads, but as a side effect, leaves the
reentrant functions from time.h no longer visible and therefore breaks
the build.
Since the intention all along was to avoid using the fallback functions,
formalize the use of POSIX by setting the corresponding feature flag and
compile out the implementation for the fallback functions.
[1] https://unix.org/whitepapers/reentrant.html
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull" with any strategy when the other side is behind us
should succeed as it is a no-op, but doesn't.
* ev/pull-already-up-to-date-is-noop:
pull: should be noop when already-up-to-date
"git grep" looking in a blob that has non-UTF8 payload was
completely broken when linked with versions of PCREv2 library older
than 10.34 in the latest release.
* hm/paint-hits-in-log-grep:
Revert "grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data"
This reverts commit f6526728f9.
The change in f652672 (dir: select directories correctly, 2021-09-24)
caused a regression in directory-based matches with non-cone-mode
patterns, especially for .gitignore patterns. A test is included to
prevent this regression in the future.
The commit ed495847 (dir: fix pattern matching on dirs, 2021-09-24) was
reverted in 5ceb663 (dir: fix directory-matching bug, 2021-11-02) for
similar reasons. Neither commit changed tests, and tests added later in
the series continue to pass when these commits are reverted.
Reported-by: Danial Alihosseini <danial.alihosseini@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit ae39ba431a, as it
breaks "grep" when looking for a string in non UTF-8 haystack, when
linked with certain versions of PCREv2 library.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The already-up-to-date pull bug was fixed for --ff-only but it did not
include the case where --ff or --ff-only are not specified. This updates
the --ff-only fix to include the case where --ff or --ff-only are not
specified in command line flags or config.
Signed-off-by: Erwin Villejo <erwin.villejo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A superfluous ']' was added to the title of the GitHub CI section in
f003a91f5c (SubmittingPatches: replace discussion of Travis with GitHub
Actions, 2021-07-22). Remove it.
While at it, format the URL for a GitHub user's workflow runs of Git
between backticks, since if not Asciidoc formats only the first part,
"https://github.com/<Your", as a link, which is not very useful.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checking typos in file "po/ko.po", "git-po-helper" reports lots of
false positives because there are no spaces between ASCII and Korean
characters. After applied commit adee197 "(dict: add smudge table for
Korean language, 2021-11-11)" of "git-l10n/git-po-helper" to suppress
these false positives, some easy-to-fix typos are found and fixed.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
When we added a new event type to trace2 event stream, we forgot to
raise the format version number, which has been corrected.
* js/trace2-raise-format-version:
trace2: increment event format version
Regression fix.
* ab/fsck-unexpected-type:
object-file: free(*contents) only in read_loose_object() caller
object-file: fix SEGV on free() regression in v2.34.0-rc2
In 64bc752 (trace2: add trace2_child_ready() to report on background
children, 2021-09-20), we added a new "child_ready" event. In
Documentation/technical/api-trace2.txt, we promise that adding a new
event type will result in incrementing the trace2 event format version
number, but this was not done. Correct this in code & docs.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commit a free() of uninitialized memory regression in
96e41f58fe (fsck: report invalid object type-path combinations,
2021-10-01) was fixed, but we'd still have an issue with leaking
memory from fsck_loose(). Let's fix that issue too.
That issue was introduced in my 31deb28f5e (fsck: don't hard die on
invalid object types, 2021-10-01). It can be reproduced under
SANITIZE=leak with the test I added in 093fffdfbe (fsck tests: add
test for fsck-ing an unknown type, 2021-10-01):
./t1450-fsck.sh --run=84 -vixd
In some sense it's not a problem, we lost the same amount of memory in
terms of things malloc'd and not free'd. It just moved from the "still
reachable" to "definitely lost" column in valgrind(1) nomenclature[1],
since we'd have die()'d before.
But now that we don't hard die() anymore in the library let's properly
free() it. Doing so makes this code much easier to follow, since we'll
now have one function owning the freeing of the "contents" variable,
not two.
For context on that memory management pattern the read_loose_object()
function was added in f6371f9210 (sha1_file: add read_loose_object()
function, 2017-01-13) and subsequently used in c68b489e56 (fsck:
parse loose object paths directly, 2017-01-13). The pattern of it
being the task of both sides to free() the memory has been there in
this form since its inception.
1. https://valgrind.org/docs/manual/mc-manual.html#mc-manual.leaks
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit f45022dc2f,
as this is like breakage in the traversal more likely. In a
history with 10 single strand of pearls,
1-->2-->3--...->7-->8-->9-->10
asking "rev-list --unsorted-input 1 10 --not 9 8 7 6 5 4" fails to
paint the bottom 1 uninteresting as the traversal stops, without
completing the propagation of uninteresting bit starting at 4 down
through 3 and 2 to 1.
Fix a regression introduced in my 96e41f58fe (fsck: report invalid
object type-path combinations, 2021-10-01). When fsck-ing blobs larger
than core.bigFileThreshold, we'd free() a pointer to uninitialized
memory.
This issue would have been caught by SANITIZE=address, but since it
involves core.bigFileThreshold, none of the existing tests in our test
suite covered it.
Running them with the "big_file_threshold" in "environment.c" changed
to say "6" would have shown this failure, but let's add a dedicated
test for this scenario based on Han Xin's report[1].
The bug was introduced between v9 and v10[2] of the fsck series merged
in 061a21d36d (Merge branch 'ab/fsck-unexpected-type', 2021-10-25).
1. https://lore.kernel.org/git/20211111030302.75694-1-hanxin.hx@alibaba-inc.com/
2. https://lore.kernel.org/git/cover-v10-00.17-00000000000-20211001T091051Z-avarab@gmail.com/
Reported-by: Han Xin <chiyutianyi@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way Cygwin emulates a unix-domain socket, on top of which the
simple-ipc mechanism is implemented, can race with the program on
the other side that wants to use the socket, and briefly make it
appear as a regular file before lstat(2) starts reporting it as a
socket. We now have a workaround on the side that connects to a
unix domain socket.
* js/simple-ipc-cygwin-socket-fix:
simple-ipc: work around issues with Cygwin's Unix socket emulation
"git maintenance run" learned to use system supplied scheduler
backend, but cron on macOS turns out to be unusable for this
purpose.
* ds/no-usable-cron-on-macos:
maintenance: disable cron on macOS
"git pull --ff-only" and "git pull --rebase --ff-only" should make
it a no-op to attempt pulling from a remote that is behind us, but
instead the command errored out by saying it was impossible to
fast-forward, which may technically be true, but not a useful thing
to diagnose as an error. This has been corrected.
* jc/fix-pull-ff-only-when-already-up-to-date:
pull: --ff-only should make it a noop when already-up-to-date
The "-Y find-principals" option of ssh-keygen seems to be broken in
Debian's openssh-client 1:8.7p1-1, whereas it works fine in 1:8.4p1-5.
This causes several failures for GPGSSH tests. We fulfill the
prerequisite because generating the keys works fine, but actually
verifying a signature causes results ranging from bogus results to
ssh-keygen segfaulting.
We can find the broken version during the prereq check by feeding it
empty input. This should result in it complaining to stderr, but in the
broken version it triggers the segfault, causing the GPGSSH tests to be
skipped.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In eba1ba9 (maintenance: `git maintenance run` learned
`--scheduler=<scheduler>`, 2021-09-04), we introduced the ability to
specify a scheduler explicitly. This led to some extra checks around
whether an alternative scheduler was available. This added the
functionality of removing background maintenance from schedulers other
than the one selected.
On macOS, cron is technically available, but running 'crontab' triggers
a UI prompt asking for special permissions. This is the major reason why
launchctl is used as the default scheduler. The is_crontab_available()
method triggers this UI prompt, causing user disruption.
Remove this disruption by using an #ifdef to prevent running crontab
this way on macOS. This has the unfortunate downside that if a user
manually selects cron via the '--scheduler' option, then adjusting the
scheduler later will not remove the schedule from cron. The
'--scheduler' option ignores the is_available checks, which is how we
can get into this situation.
Extract the new check_crontab_process() method to avoid making the
'child' variable unused on macOS. The method is marked MAYBE_UNUSED
because it has no callers on macOS.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cygwin emulates Unix sockets by writing files with custom contents and
then marking them as system files.
The tricky problem is that while the file is written and its `system`
bit is set, it is still identified as a file. This caused test failures
when Git is too fast looking for the Unix sockets and then complains
that there is a plain file in the way.
Let's work around this by adding a delayed retry loop, specifically for
Cygwin.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of github.com:git/git:
Git 2.34-rc2
parse-options.[ch]: revert use of "enum" for parse_options()
t/lib-git.sh: fix ACL-related permissions failure
A few fixes before -rc2
async_die_is_recursing: work around GCC v11.x issue on Fedora
Document positive variant of commit and merge option "--no-verify"
pull: honor --no-verify and do not call the commit-msg hook
http-backend: remove a duplicated code branch
Fix ssh-signing test to work on a platform where the default ACL is
overly loose to upset OpenSSH (reported on an installation of Cygwin).
* ad/ssh-signing-testfix:
t/lib-git.sh: fix ACL-related permissions failure
Revert the parse_options() prototype change in my recent
352e761388 (parse-options.[ch]: consistently use "enum
parse_opt_result", 2021-10-08) was incorrect. The parse_options()
function returns the number of argc elements that haven't been
processed, not "enum parse_opt_result".
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As well as checking that the relevant functionality is available, the
GPGSSH prerequisite check creates the SSH keys that are used by the test
functions it gates. If these keys are created in a directory that
has a default Access Control List, the key files can inherit those
permissions.
This can result in a scenario where the private keys are created
successfully, so the prerequisite check passes and the tests are run,
but the key files have permissions that are too permissive, meaning
OpenSSH will refuse to load them and the tests will fail.
To avoid this happening, before creating the keys, clear any default ACL
set on the directory that will contain them. This step allowed to fail;
if setfacl isn't present, that's a very likely indicator that the
filesystem in question simply doesn't support default ACLs.
Helped-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One CI task based on Fedora image noticed a not-quite-kosher
consturct recently, which has been corrected.
* vd/pthread-setspecific-g11-fix:
async_die_is_recursing: work around GCC v11.x issue on Fedora
One CI task based on Fedora image noticed a not-quite-kosher
consturct recently, which has been corrected.
* vd/pthread-setspecific-g11-fix:
async_die_is_recursing: work around GCC v11.x issue on Fedora
"git pull --no-verify" did not affect the underlying "git merge".
* ar/fix-git-pull-no-verify:
pull: honor --no-verify and do not call the commit-msg hook
This fix corrects an issue found in the `dockerized(pedantic, fedora)` CI
build, first appearing after the introduction of a new version of the Fedora
docker image version. This image includes a version of `glibc` with the
attribute `__attr_access_none` added to `pthread_setspecific` [1], the
implementation of which only exists for GCC 11.X - the version included in
the Fedora image. The attribute requires that the pointer provided in the
second argument of `pthread_getspecific` must, if not NULL, be a pointer to
a valid object. In the usage in `async_die_is_recursing`, `(void *)1` is not
valid, causing the error.
This fix imitates a workaround added in SELinux [2] by using the pointer to
the static `async_die_counter` itself as the second argument to
`pthread_setspecific`. This guaranteed non-NULL, valid pointer matches the
intent of the current usage while not triggering the build error.
[1] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=a1561c3bbe8
[2] https://lore.kernel.org/all/20211021140519.6593-1-cgzones@googlemail.com/
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Victoria Dye <vdye@github.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of github.com:git/git:
Git 2.34-rc1
rebase -i: fix rewording with --committer-date-is-author-date
dir: fix directory-matching bug
gpg-interface: avoid buffer overrun in parse_ssh_output()
gpg-interface: handle missing " with " gracefully in parse_ssh_output()
A few more topics before -rc1
i18n: fix typos found during l10n for git 2.34.0
t5310: drop lib-bundle.sh include
format-patch (doc): clarify --base=auto
gc: perform incremental repack when implictly enabled
fsck: verify multi-pack-index when implictly enabled
fsck: verify commit graph when implicitly enabled
grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data
commit-graph: don't consider "replace" objects with "verify"
commit-graph tests: fix another graph_git_two_modes() helper
commit-graph tests: fix error-hiding graph_git_two_modes() helper
pretty: colorize pattern matches in commit messages
grep: refactor next_match() and match_one_pattern() for external use
baf8ec8d3a (rebase -r: don't write .git/MERGE_MSG when
fast-forwarding, 2021-08-20) stopped reading the author script in
run_git_commit() when rewording a commit. This is normally safe
because "git commit --amend" preserves the authorship. However if the
user passes "--committer-date-is-author-date" then we need to read the
author date from the author script when rewording. Fix this regression
by tightening the check for when it is safe to skip reading the author
script.
Reported-by: Jonas Kittner <jonas.kittner@ruhr-uni-bochum.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts the change from ed49584 (dir: fix pattern matching on dirs,
2021-09-24), which claimed to fix a directory-matching problem without a
test case. It turns out to _create_ a bug, but it is a bit subtle.
The bug would have been revealed by the first of two tests being added to
t0008-ignores.sh. The first uses a pattern "/git/" inside the a/.gitignores
file, which matches against 'a/git/foo' but not 'a/git-foo/bar'. This test
would fail before the revert.
The second test shows what happens if the test instead uses a pattern "git/"
and this test passes both before and after the revert.
The difference in these two cases are due to how
last_matching_pattern_from_list() checks patterns both if they have the
PATTERN_FLAG_MUSTBEDIR and PATTERN_FLAG_NODIR flags. In the case of "git/",
the PATTERN_FLAG_NODIR is also provided, making the change in behavior in
match_pathname() not affect the end result of
last_matching_pattern_from_list().
Reported-by: Glen Choo <chooglen@google.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the string "key" we found in the output of ssh-keygen happens to be
located at the very end of the line, then going four characters further
leaves us beyond the end of the string. Explicitly search for the
space after "key" to handle a missing one gracefully.
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the output of ssh-keygen starts with "Good \"git\" signature for ",
but is not followed by " with " for some reason, then parse_ssh_output()
uses -1 as the len parameter of xmemdupz(), which in turn will end the
program. Reject the signature and carry on instead in that case.
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is wrong to read some settings directly from the config
subsystem, as things like feature.experimental can affect their
default values.
* gc/use-repo-settings:
gc: perform incremental repack when implictly enabled
fsck: verify multi-pack-index when implictly enabled
fsck: verify commit graph when implicitly enabled
Teach "git commit-graph" command not to allow using replace objects
at all, as we do not use the commit-graph at runtime when we see
object replacement.
* ab/ignore-replace-while-working-on-commit-graph:
commit-graph: don't consider "replace" objects with "verify"
commit-graph tests: fix another graph_git_two_modes() helper
commit-graph tests: fix error-hiding graph_git_two_modes() helper
"git log --grep=string --author=name" learns to highlight hits just
like "git grep string" does.
* hm/paint-hits-in-log-grep:
grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data
pretty: colorize pattern matches in commit messages
grep: refactor next_match() and match_one_pattern() for external use
* cleaning duplicate incorrect translations part 2
* update translation table
* unfuzzy all entries
* typos check in git commands and git flags
* random line translations
* updating all phrases #1
Signed-off-by: Daniel Santos <daniel@brilhante.top>
Emir and Jean-Noël reported typos in some i18n messages when preparing
l10n for git 2.34.0.
* Fix unstable spelling of config variable "gpg.ssh.defaultKeyCommand"
which was introduced in commit fd9e226776 (ssh signing: retrieve a
default key from ssh-agent, 2021-09-10).
* Add missing space between "with" and "--python" which was introduced
in commit bd0708c7eb (ref-filter: add %(raw) atom, 2021-07-26).
* Fix unmatched single quote in 'builtin/index-pack.c' which was
introduced in commit 8737dab346 (index-pack: refactor renaming in
final(), 2021-09-09)
[1] https://github.com/git-l10n/git-po/pull/567
Reported-by: Emir Sarı <bitigchi@me.com>
Reported-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of github.com:git/git: (762 commits)
Git 2.34-rc0
wrapper: remove xunsetenv()
log: document --encoding behavior on iconv() failure
Revert "logmsg_reencode(): warn when iconv() fails"
completion: fix incorrect bash/zsh string equality check
add, rm, mv: fix bug that prevents the update of non-sparse dirs
git-bundle.txt: add missing words and punctuation
Documentation/Makefile: fix lint-docs mkdir dependency
submodule: drop unused sm_name parameter from append_fetch_remotes()
The fifteenth batch
gitweb.txt: change "folder" to "directory"
gitignore.txt: change "folder" to "directory"
git-multi-pack-index.txt: change "folder" to "directory"
git.txt: fix typo
archive: describe compression level option
config.txt: fix typo
command-list.txt: remove 'sparse-index' from main help
userdiff-cpp: back out the digit-separators in numbers
submodule--helper: fix incorrect newlines in an error message
branch (doc): -m/-c copies config and reflog
...
"git branch -c/-m new old" was not described to copy config, which
has been corrected.
* jc/branch-copy-doc:
branch (doc): -m/-c copies config and reflog
Consistently use 'directory', not 'folder', to call the filesystem
entity that collects a group of files and, eh, directories.
* ma/doc-folder-to-directory:
gitweb.txt: change "folder" to "directory"
gitignore.txt: change "folder" to "directory"
git-multi-pack-index.txt: change "folder" to "directory"
Drop "git sparse-index" from the list of common commands.
* sg/sparse-index-not-that-common-a-command:
command-list.txt: remove 'sparse-index' from main help
Update "git archive" documentation and give explicit mention on the
compression level for both zip and tar.gz format.
* bs/archive-doc-compression-level:
archive: describe compression level option
Message regression fix.
* ks/submodule-add-message-fix:
submodule: drop unused sm_name parameter from append_fetch_remotes()
submodule--helper: fix incorrect newlines in an error message
Leakfix.
* ab/plug-random-leaks:
reflog: free() ref given to us by dwim_log()
submodule--helper: fix small memory leaks
clone: fix a memory leak of the "git_dir" variable
grep: fix a "path_list" memory leak
grep: use object_array_clear() in cmd_grep()
grep: prefer "struct grep_opt" over its "void *" equivalent
"git for-each-ref" family of commands were leaking the ref_sorting
instances that hold sorting keys specified by the user; this has
been corrected.
* ab/ref-filter-leakfix:
branch: use ref_sorting_release()
ref-filter API user: add and use a ref_sorting_release()
tag: use a "goto cleanup" pattern, leak less memory
"git push" client talking to an HTTP server did not diagnose the
lack of the final status report from the other side correctly,
which has been corrected.
* jk/http-push-status-fix:
transport-helper: recognize "expecting report" error from send-pack
send-pack: complain about "expecting report" with --helper-status
A new feature has been added to abort early in the test framework.
* ab/test-bail:
test-lib.sh: use "Bail out!" syntax on bad SANITIZE=leak use
test-lib.sh: de-duplicate error() teardown code
We already note that we may produce invalid output when we skip calling
iconv() altogether. But we may also do so if iconv() fails, and we have
no good alternative. Let's document this to avoid surprising users.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit fd680bc5 (logmsg_reencode(): warn when iconv()
fails, 2021-08-27). Throwing a warning for each and every commit
that gets reencoded, without allowing a way to squelch, would make
it unpleasant for folks who have to deal with an ancient part of the
history in an old project that used wrong encoding in the commits.
This documents "--verify" option of the commands. It can be used to re-enable
the hooks disabled by an earlier "--no-verify" in command-line.
Signed-off-by: Alexander Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, we made sure that "git pull --ff-only" (and "git -c
pull.ff=only pull") errors out when our current HEAD is not an
ancestor of the tip of the history we are merging, but the condition
to trigger the error was implemented incorrectly.
Imagine you forked from a remote branch, built your history on top
of it, and then attempted to pull from them again. If they have not
made any update in the meantime, our current HEAD is obviously not
their ancestor, and this new error triggers.
Without the --ff-only option, we just report that there is no need
to pull; we did the same historically with --ff-only, too.
Make sure we do not fail with the recently added check to restore
the historical behaviour.
Reported-by: Kenneth Arnold <ka37@calvin.edu>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit ddfe900612 (test-lib-functions: move function to lib-bitmap.sh,
2021-02-09) meant to include lib-bitmap.sh in t5310, but also includes
lib-bundle.sh. Yet we don't use any of its functions, nor have anything
to do with bundles. This is probably just a typo/copy-paste error, as
lib-bundle.sh was added (correctly) to other scripts in the same series.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option was incorrectly auto-translated to "--no-verify-signatures",
which causes the unexpected effect of the hook being called.
And an even more unexpected effect of disabling verification of signatures.
The manual page describes the option to behave same as the similarly
named option of "git merge", which seems to be the original intention
of this option in the "pull" command.
Signed-off-by: Alexander Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the basic `[`/`test` command, the string equality operator is a
single `=`. The `==` operator is only available in `[[`, which is a
bash-ism also supported by zsh.
This mix-up was causing the following completion error in zsh:
> __git_ls_files_helper:7: = not found
(That message refers to the extraneous symbol in `==` ← `=`).
This updates that comparison to use a single `=` inside the
basic `[ … ]` test conditional.
Although this fix is inconsistent with the other comparisons in this
file, which use `[[ … == … ]]`, and the two expressions are functionally
identical in this context, that approach was rejected due to a
preference for `[`.
Signed-off-by: Robert Estelle <robertestelle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These three commands recently learned to avoid updating paths outside
the sparse checkout even if they are missing the SKIP_WORKTREE bit. This
is done using path_in_sparse_checkout(), which checks whether a given
path matches the current list of sparsity rules, similar to what
clear_ce_flags() does when we run "git sparse checkout init" or "git
sparse-checkout reapply". However, clear_ce_flags() uses a recursive
approach, applying the match results from parent directories on paths
that get the UNDECIDED result, whereas path_in_sparse_checkout() only
attempts to match the full path and immediately considers UNDECIDED as
NOT_MATCHED. This makes the function miss matches with leading
directories. For example, if the user has the sparsity patterns "!/a"
and "b/", add, rm, and mv will fail to update the path "a/b/c" and end
up displaying a warning about it being outside the sparse checkout even
though it isn't. This problem only occurs in full pattern mode as the
pattern matching functions never return UNDECIDED for cone mode.
To fix this, replicate the recursive behavior of clear_ce_flags() in
path_in_sparse_checkout(), falling back to the parent directory match
when a path gets the UNDECIDED result. (If this turns out to be too
expensive in some cases, we may want to later add some form of caching
to accelerate multiple queries within the same directory. This is not
implemented in this patch, though.) Also add two tests for each affected
command (add, rm, and mv) to check that they behave correctly with the
recursive pattern matching. The first test would previously fail without
this patch while the second already succeeded. It is added mostly to
make sure that we are not breaking the existing pattern matching for
directories that are really sparse, and also as a protection against any
future regressions.
Two other existing tests had to be changed as well: one test in t3602
checks that "git rm -r <dir>" won't remove sparse entries, but it didn't
allow the non-sparse entries inside <dir> to be removed. The other one,
in t7002, tested that "git mv" would correctly display a warning message
for sparse paths, but it accidentally expected the message to include
two non-sparse paths as well.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an "and" to separate the two halves of the first sentence of the
paragraph more. Add a comma to similarly separate the two halves of the
second sentence a bit better. Add a period at the end of the paragraph.
Further down in the file, add the missing "be" in "must be accompanied".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 8650c6298c (doc lint: make "lint-docs" non-.PHONY, 2021-10-15), we
put the output for gitlink linter into .build/lint-docs/gitlink. There
are order-only dependencies to create the sequence of subdirs like:
.build/lint-docs: | .build
$(QUIET)mkdir $@
.build/lint-docs/gitlink: | .build/lint-docs
$(QUIET)mkdir $@
where each level has to depend on the prior one (since the parent
directory must exist for us to create something inside it). But the
"howto" and "config" subdirectories of gitlink have the wrong
dependency; they depend on "lint-docs", not "lint-docs/gitlink".
This usually works out, because the LINT_DOCS_GITLINK targets which
depend on "gitlink/howto" also depend on just "gitlink", so the
directory gets created anyway. But since we haven't given make an
explicit ordering, things can racily happen out of order.
If you stick a "sleep 1" in the rule to build "gitlink" like this:
## Lint: gitlink
.build/lint-docs/gitlink: | .build/lint-docs
- $(QUIET)mkdir $@
+ $(QUIET)sleep 1 && mkdir $@
then "make clean; make lint-docs" will fail reliably. Or you can see it
as-is just by building the directory in isolation:
$ make clean
[...]
$ make .build/lint-docs/gitlink/howto
GEN mergetools-list.made
GEN cmd-list.made
GEN doc.dep
SUBDIR ../
make[1]: 'GIT-VERSION-FILE' is up to date.
SUBDIR ../
make[1]: 'GIT-VERSION-FILE' is up to date.
mkdir: cannot create directory ‘.build/lint-docs/gitlink/howto’: No such file or directory
make: *** [Makefile:476: .build/lint-docs/gitlink/howto] Error 1
The fix is easy: we just need to depend on the correct parent directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c21fb4676f (submodule--helper: fix incorrect newlines in an error
message, 2021-10-23) accidentally added a new, unused parameter while
changing the name and signature of show_fetch_remotes() to
append_fetch_remotes(). We can drop this to keep things simpler (and
satisfy -Wunused-parameter).
The error is likely because c21fb4676f is fixing a problem from
8c8195e9c3 (submodule--helper: introduce add-clone subcommand,
2021-07-10). An earlier iteration of that second commit introduced the
same unused parameter (though it was dropped before it finally made it
to 'next'), and the fix on top accidentally carried forward the extra
parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test clean-up.
* ab/test-lib-diff-cleanup:
tests: stop using top-level "README" and "COPYING" files
"lib-diff" tests: make "README" and "COPYING" test data smaller
The codepath to write a new version of .midx multi-pack index files
has learned to release the mmaped memory holding the current
version of .midx before removing them from the disk, as some
platforms do not allow removal of a file that still has mapping.
* tb/fix-midx-rename-while-mapped:
midx.c: guard against commit_lock_file() failures
midx.c: lookup MIDX by object directory during repack
midx.c: lookup MIDX by object directory during expire
midx.c: extract MIDX lookup by object_dir
Improve test framework around unwritable directories.
* ab/test-cleanly-recreate-trash-directory:
test-lib.sh: try to re-chmod & retry on failed trash removal
Bunch of tests are marked as "passing leak check".
* ab/mark-leak-free-tests-more:
merge: add missing strbuf_release()
ls-files: add missing string_list_clear()
ls-files: fix a trivial dir_clear() leak
tests: fix test-oid-array leak, test in SANITIZE=leak
tests: fix a memory leak in test-oidtree.c
tests: fix a memory leak in test-parse-options.c
tests: fix a memory leak in test-prio-queue.c
Bunch of tests are marked as "passing leak check".
* ab/mark-leak-free-tests:
leak tests: mark some misc tests as passing with SANITIZE=leak
leak tests: mark various "generic" tests as passing with SANITIZE=leak
leak tests: mark some read-tree tests as passing with SANITIZE=leak
leak tests: mark some ls-files tests as passing with SANITIZE=leak
leak tests: mark all checkout-index tests as passing with SANITIZE=leak
leak tests: mark all trace2 tests as passing with SANITIZE=leak
leak tests: mark all ls-tree tests as passing with SANITIZE=leak
leak tests: run various "test-tool" tests in t00*.sh SANITIZE=leak
leak tests: run various built-in tests in t00*.sh SANITIZE=leak
Random changes to parse-options implementation.
* ab/parse-options-cleanup:
parse-options: change OPT_{SHORT,UNSET} to an enum
parse-options tests: test optname() output
parse-options.[ch]: make opt{bug,name}() "static"
commit-graph: stop using optname()
parse-options.c: move optname() earlier in the file
parse-options.h: make the "flags" in "struct option" an enum
parse-options.c: use exhaustive "case" arms for "enum parse_opt_result"
parse-options.[ch]: consistently use "enum parse_opt_result"
parse-options.[ch]: consistently use "enum parse_opt_flags"
parse-options.h: move PARSE_OPT_SHELL_EVAL between enums
Userdiff patterns for the C++ language has been updated.
* js/userdiff-cpp:
userdiff-cpp: back out the digit-separators in numbers
userdiff-cpp: learn the C++ spaceship operator
userdiff-cpp: permit the digit-separating single-quote in numbers
userdiff-cpp: prepare test cases with yet unsupported features
userdiff-cpp: tighten word regex
t4034: add tests showing problematic cpp tokenizations
t4034/cpp: actually test that operator tokens are not split
The xxdiff difftool backend can exit with status 128, which the
difftool-helper that launches the backend takes as a significant
failure, when it is not significant at all. Work it around.
* da/mergetools-special-case-xxdiff-exit-128:
mergetools/xxdiff: prevent segfaults from stopping difftool
Fix-up for the other topic already in 'next'.
* fs/ssh-signing-fix:
gpg-interface: fix leak of strbufs in get_ssh_key_fingerprint()
gpg-interface: fix leak of "line" in parse_ssh_output()
ssh signing: clarify trustlevel usage in docs
ssh signing: fmt-merge-msg tests & config parse
Use ssh public crypto for object and push-cert signing.
* fs/ssh-signing:
ssh signing: test that gpg fails for unknown keys
ssh signing: tests for logs, tags & push certs
ssh signing: duplicate t7510 tests for commits
ssh signing: verify signatures using ssh-keygen
ssh signing: provide a textual signing_key_id
ssh signing: retrieve a default key from ssh-agent
ssh signing: add ssh key format and signing code
ssh signing: add test prereqs
ssh signing: preliminary refactoring and clean-up
Recent sparse-index addition, namely any use of index_name_pos(),
can expand sparse index entries and breaks any code that walks
cache-tree or existing index entries. One such instance of such a
breakage has been corrected.
* pw/sparse-cache-tree-verify-fix:
t1092: run "rebase --apply" without "-q" in testing
sparse index: fix use-after-free bug in cache_tree_verify()
"git commit" gave duplicated error message when the object store
was unwritable, which has been corrected.
* ab/fix-commit-error-message-upon-unwritable-object-store:
commit: fix duplication regression in permission error output
unwritable tests: assert exact error output
Avoid performance measurements from getting ruined by gc and other
housekeeping pauses interfering in the middle.
* rs/disable-gc-during-perf-tests:
perf: disable automatic housekeeping
Follow through the work to use the repo interface to access
submodule objects in-process, instead of abusing the alternate
object database interface.
* jt/no-abuse-alternate-odb-for-submodules:
submodule: trace adding submodule ODB as alternate
submodule: pass repo to check_has_commit()
object-file: only register submodule ODB if needed
merge-{ort,recursive}: remove add_submodule_odb()
refs: peeling non-the_repository iterators is BUG
refs: teach arbitrary repo support to iterators
refs: plumb repo into ref stores
Leakfix.
* ab/unpack-trees-leakfix:
sequencer: fix a memory leak in do_reset()
sequencer: add a "goto cleanup" to do_reset()
unpack-trees: don't leak memory in verify_clean_subdirectory()
"git fsck" has been taught to report mismatch between expected and
actual types of an object better.
* ab/fsck-unexpected-type:
fsck: report invalid object type-path combinations
fsck: don't hard die on invalid object types
object-file.c: stop dying in parse_loose_header()
object-file.c: return ULHR_TOO_LONG on "header too long"
object-file.c: use "enum" return type for unpack_loose_header()
object-file.c: simplify unpack_loose_short_header()
object-file.c: make parse_loose_header_extended() public
object-file.c: return -1, not "status" from unpack_loose_header()
object-file.c: don't set "typep" when returning non-zero
cat-file tests: test for current --allow-unknown-type behavior
cat-file tests: add corrupt loose object test
cat-file tests: test for missing/bogus object with -t, -s and -p
cat-file tests: move bogus_* variable declarations earlier
fsck tests: test for garbage appended to a loose object
fsck tests: test current hash/type mismatch behavior
fsck tests: refactor one test to use a sub-repo
fsck tests: add test for fsck-ing an unknown type
We prefer "directory" over "folder" when discussing the file system
concept. Change this instance for consistency.
After this, the only hits for '\<folder\>' in Documentation/ relate to
IMAP folders.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We prefer "directory" over "folder" when discussing the file system
concept. Change this instance for consistency -- indeed, even within
this paragraph, we already use "directory".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We prefer "directory" over "folder" when discussing the file system
concept. In all of our documentation, these are the only spots where we
refer to the `.git` directory as a folder. Switch to "directory", and
while doing so, add backticks to the ".git" filename to set it in
monospace.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe the only <extra> option in `git archive`, that is the compression
level option. Previously this option is only described for zip backend;
add description also for tar backend.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since 'git sparse-checkout' was introduced [1] it is included in
'git --help' in the section "work on the current change" along with
the commands 'add', 'mv', 'restore', and 'rm'. It clearly doesn't
belong to that group, moreover it can't be considered such a common
command to belong to 'git --help' in the first place, so remove it
from there.
[1] 94c0956b60 (sparse-checkout: create builtin with 'list'
subcommand, 2019-11-21)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Try to make reading the computation of the gzipped flag a bit more
natural.
Signed-off-by: Robin Dupret <robin.dupret@hey.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation of digit-separating single-quotes introduced a
note-worthy regression: the change of a character literal with a
digit would splice the digit and the closing single-quote. For
example, the change from 'a' to '2' is now tokenized as
'[-a'-]{+2'+} instead of '[-a-]{+2+}'.
The options to fix the regression are:
- Tighten the regular expression such that the single-quote can only
occur between digits (that would match the official syntax).
- Remove support for digit separators.
I chose to remove support, because
- I have not seen a lot of code make use of digit separators.
- If code does use digit separators, then the numbers are typically
long. If a change in one of the segments occurs, it is actually
better visible if only that segment is highlighted as the word
that changed instead of the whole long number.
This choice does introduce another minor regression, though, which
is highlighted in the test case: when a change occurs in the second
or later segment of a hexadecimal number where the segment begins
with a digit, but also has letters, the segment is mistaken as
consisting of a number and an identifier. I can live with that.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A refactoring[1] done as part of the recent conversion of
'git submodule add' to builtin, changed the error message
shown when a Git directory already exists locally for a submodule
name. Before the refactoring, the error used to appear like so:
--- START OF OUTPUT ---
$ git submodule add ../sub/ subm
A git directory for 'subm' is found locally with remote(s):
origin /me/git-repos-for-test/sub
If you want to reuse this local git directory instead of cloning again from
/me/git-repos-for-test/sub
use the '--force' option. If the local git directory is not the correct repo
or you are unsure what this means choose another name with the '--name' option.
--- END OF OUTPUT ---
After the refactoring the error started appearing like so:
--- START OF OUTPUT ---
$ git submodule add ../sub/ subm
A git directory for 'subm' is found locally with remote(s): origin /me/git-repos-for-test/sub
fatal: If you want to reuse this local git directory instead of cloning again from
/me/git-repos-for-test/sub
use the '--force' option. If the local git directory is not the correct repo
or if you are unsure what this means, choose another name with the '--name' option.
--- END OF OUTPUT ---
As one could observe the remote information is printed along with the
first line rather than on its own line. Also, there's an additional
newline following output.
Make the error message consistent with the error message that used to be
printed before the refactoring.
This also moves the 'fatal:' prefix that appears in the middle of the
error message to the first line as it would more appropriate to have
it in the first line. The output after the change would look like:
--- START OF OUTPUT ---
$ git submodule add ../sub/ subm
fatal: A git directory for 'subm' is found locally with remote(s):
origin /me/git-repos-for-test/sub
If you want to reuse this local git directory instead of cloning again from
/me/git-repos-for-test/sub
use the '--force' option. If the local git directory is not the correct repo
or you are unsure what this means choose another name with the '--name' option.
--- END OF OUTPUT ---
[1]: https://lore.kernel.org/git/20210710074801.19917-5-raykar.ath@gmail.com/#t
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description section for the command mentions config and reflog
are moved or copied by these options, but the description for these
options did not. Make them match.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
What --base=auto tells format-patch is to compute the base commit
itself, using the tracking information. It does not make anything
track anything.
Tighten the phrasing so that it won't be copied and pasted to other
places.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When dwim_log() returns the "ref" is always ether NULL or an
xstrdup()'d string.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a missing strbuf_release() and a clear_pathspec() to the
submodule--helper.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At this point in cmd_clone the "git_dir" is always either an
xstrdup()'d string, or something we got from mkpathdup(). Let's free()
it before we clobber it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Free the "path_list" used in builtin/grep.c, it was declared as
STRING_LIST_INIT_NODUP, let's change it to a STRING_LIST_INIT_DUP
since an early user in cmd_grep() appends a string passed via
parse-options.c to it, which needs to be duplicated.
Let's then convert the remaining callers to use
string_list_append_nodup() instead, allowing us to free the list.
This makes all the tests in t7811-grep-open.sh pass, 6/10 would fail
before this change. The only remaining failure would have been due to
a stray "git checkout" (which still leaks memory). In this case we can
use a "git reset --hard" instead, so let's do that, and move the
test_when_finished() above the code that would modify the relevant
file.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Free the "struct object_array" before exiting. This makes grep tests
(e.g. "t7815-grep-binary.sh") a bit happer under SANITIZE=leak.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stylistically fix up code added in bfac23d953 (grep: Fix two memory
leaks, 2010-01-30). We usually don't use the "arg" at all once we've
casted it to the struct we want, let's not do that here when we're
freeing it. Perhaps it was thought that a cast to "void *" would
otherwise be needed?
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in the error() path in handle_path_include(), this
allows us to run t1305-config-include.sh under SANITIZE=leak,
previously 4 tests there would fail. This fixes up a leak in
9b25a0b52e (config: add include directive, 2012-02-06).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "sparse" target needed the GIT-CFLAGS dependency before my
c234e8a0ec (Makefile: make the "sparse" target non-.PHONY,
2021-09-23), but since then it depends on the corresponding *.o files,
which in turn depend on the correct header files, as well as on
GIT-CFLAGS. There's no need to re-state this dependency here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove messages that were last used by the code removed in
a74b35081c (rebase: drop support for `--preserve-merges`,
2021-09-07).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "eval_ngettext()" function has been orphaned since its last user
was removed in a74b35081c (rebase: drop support for
`--preserve-merges`, 2021-09-07).
See b8fc9e43a7 (i18n: rebase-interactive: mark here-doc strings for
translation, 2016-06-17) for the commit that added these
eval_ngettext() wrappers.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a ref_sorting_release() in branch.c to free the memory from the
ref_sorting_options(). This plugs the final in-tree memory leak of
that API.
In the preceding commit the "sorting" variable was left in the
cmd_branch() scope, even though that wasn't needed anymore. Move it to
the "else if (list)" scope instead. We can also move the "struct
string_list" only used for that branch to be declared in that block
That "struct ref_sorting" does not need to be "static" (and isn't
re-used). The "ref_sorting_options()" will return a valid one, we
don't need to make it "static" to have it zero'd out. That it was
static was another artifact of the pre-image of the preceding commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a ref_sorting_release() and use it for some of the current API
users, the ref_sorting_default() function and its siblings will do a
malloc() which wasn't being free'd previously.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change cmd_tag() to free its "struct strbuf"'s instead of using an
UNLEAK() pattern. This changes code added in 886e1084d7 (builtin/:
add UNLEAKs, 2017-10-01).
As shown in the context of the declaration of the "struct
msg_arg" (which I'm changing to use a designated initializer while at
it, and to show the context in this change), that struct is just a
thin wrapper around an int and "struct strbuf".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in 8c32856133 (blame: document --color-* options,
2021-10-08), which added an extra newline before the "+" syntax.
The "Documentation/doc-diff HEAD~ HEAD" output with this applied is:
[...]
@@ -1815,13 +1815,13 @@ CONFIGURATION FILE
specified colors if the line was introduced before the given
timestamp, overwriting older timestamped colors.
- + Instead of an absolute timestamp relative timestamps work as well,
- e.g. 2.weeks.ago is valid to address anything older than 2 weeks.
+ Instead of an absolute timestamp relative timestamps work as well,
+ e.g. 2.weeks.ago is valid to address anything older than 2 weeks.
- + It defaults to blue,12 month ago,white,1 month ago,red, which colors
- everything older than one year blue, recent changes between one month
- and one year old are kept white, and lines introduced within the last
- month are colored red.
+ It defaults to blue,12 month ago,white,1 month ago,red, which
+ colors everything older than one year blue, recent changes between
+ one month and one year old are kept white, and lines introduced
+ within the last month are colored red.
color.blame.repeatedLines
Use the specified color to colorize line annotations for git blame
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The PATH used in CI job may be too wide and let incompatible dlls
to be grabbed, which can cause the build&test to fail. Tighten it.
* js/windows-ci-path-fix:
ci(windows): ensure that we do not pick up random executables
The "--color-lines" and "--color-by-age" options of "git blame"
have been missing, which are now documented.
* bs/doc-blame-color-lines:
blame: document --color-* options
blame: describe default output format
Recent sparse-index work broke safety against attempts to add paths
with trailing slashes to the index, which has been corrected.
* rs/make-verify-path-really-verify-again:
read-cache: let verify_path() reject trailing dir separators again
read-cache: add verify_path_internal()
t3905: show failure to ignore sub-repo
"git cat-file --batch" with the "--batch-all-objects" option is
supposed to iterate over all the objects found in a repository, but
it used to translate these object names using the replace mechanism,
which defeats the point of enumerating all objects in the repository.
This has been corrected.
* jk/cat-file-batch-all-wo-replace:
cat-file: use packed_object_info() for --batch-all-objects
cat-file: split ordered/unordered batch-all-objects callbacks
cat-file: disable refs/replace with --batch-all-objects
cat-file: mention --unordered along with --batch-all-objects
t1006: clean up broken objects
An editor session launched during a Git operation (e.g. during 'git
commit') can leave the terminal in a funny state. The code path
has updated to save the terminal state before, and restore it
after, it spawns an editor.
* cm/save-restore-terminal:
editor: save and reset terminal after calling EDITOR
terminal: teach git how to save/restore its terminal settings
Code clean-up.
* ab/designated-initializers-more:
builtin/remote.c: add and use SHOW_INFO_INIT
builtin/remote.c: add and use a REF_STATES_INIT
urlmatch.[ch]: add and use URLMATCH_CONFIG_INIT
builtin/blame.c: refactor commit_info_init() to COMMIT_INFO_INIT macro
daemon.c: refactor hostinfo_init() to HOSTINFO_INIT macro
"git repack" has been taught to generate multi-pack reachability
bitmaps.
* tb/repack-write-midx:
test-read-midx: fix leak of bitmap_index struct
builtin/repack.c: pass `--refs-snapshot` when writing bitmaps
builtin/repack.c: make largest pack preferred
builtin/repack.c: support writing a MIDX while repacking
builtin/repack.c: extract showing progress to a variable
builtin/repack.c: rename variables that deal with non-kept packs
builtin/repack.c: keep track of existing packs unconditionally
midx: preliminary support for `--refs-snapshot`
builtin/multi-pack-index.c: support `--stdin-packs` mode
midx: expose `write_midx_file_only()` publicly
The "--preserve-merges" option of "git rebase" has been removed.
* js/retire-preserve-merges:
sequencer: restrict scope of a formerly public function
rebase: remove a no-longer-used function
rebase: stop mentioning the -p option in comments
rebase: remove obsolete code comment
rebase: drop the internal `rebase--interactive` command
git-svn: drop support for `--preserve-merges`
rebase: drop support for `--preserve-merges`
pull: remove support for `--rebase=preserve`
tests: stop testing `git rebase --preserve-merges`
remote: warn about unhandled branch.<name>.rebase values
t5520: do not use `pull.rebase=preserve`
The mergesort implementation used to sort linked list has been
optimized.
* rs/mergesort:
test-mergesort: use repeatable random numbers
mergesort: use ranks stack
p0071: test performance of llist_mergesort()
p0071: measure sorting of already sorted and reversed files
test-mergesort: add unriffle_skewed mode
test-mergesort: add unriffle mode
test-mergesort: add generate subcommand
test-mergesort: add test subcommand
test-mergesort: add sort subcommand
test-mergesort: use strbuf_getline()
When a transport helper pushes via send-pack, it passes --helper-status
to get a machine-readable status back for each ref. The previous commit
taught the send-pack code to hand back "error expecting report" if the
server did not send us the proper ref-status. And that's enough to cause
us to recognize that an error occurred for the ref and print something
sensible in our final status table.
But we do interpret these messages on the remote-helper side to turn
them back into REF_STATUS_* enum values. Recognizing this token to turn
it back into REF_STATUS_EXPECTING_REPORT has two advantages:
1. We now print exactly the same message in the human-readable (and
machine-readable --porcelain) output for this situation whether the
transport went through a helper (e.g., http) or not (e.g., ssh).
2. If any code in the helper really cares about distinguishing
EXPECT_REPORT from more generic error conditions, it could now do
so. I didn't find any, so this is mostly future-proofing.
So this is mostly cosmetic for now, but it seems like the
least-surprising thing for the transport-helper code to be doing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing to a server which erroneously omits the final ref-status
report, the client side should complain about the refs for which we
didn't receive the status (because we can't just assume they were
updated). This works over most transports like ssh, but for http we'll
print a very misleading "Everything up-to-date".
It works for ssh because send-pack internally sets the status of each
ref to REF_STATUS_EXPECTING_REPORT, and then if the server doesn't tell
us about a particular ref, it will stay at that value. When we print the
final status table, we'll see that we're still on EXPECTING_REPORT and
complain then.
But for http, we go through remote-curl, which invokes send-pack with
"--stateless-rpc --helper-status". The latter option causes send-pack to
return a machine-readable list of ref statuses to the remote helper. But
ever since its inception in de1a2fdd38 (Smart push over HTTP: client
side, 2009-10-30), the send-pack code has simply omitted mention of any
ref which ended up in EXPECTING_REPORT.
In the remote helper, we then take the absence of any status report
from send-pack to mean that the ref was not even something we tried to
send, and thus it prints "Everything up-to-date". Fortunately it does
detect the eventual non-zero exit from send-pack, and propagates that in
its own non-zero exit code. So at least a careful script invoking "git
push" would notice the failure. But sending the misleading message on
stderr is certainly confusing for humans (not to mention the
machine-readable "push --porcelain" output, though again, any careful
script should be checking the exit code from push, too).
Nobody seems to have noticed because the server in this instance has to
be misbehaving: it has promised to support the ref-status capability
(otherwise the client will not set EXPECTING_REPORT at all), but didn't
send us any. If the connection were simply cut, then send-pack would
complain about getting EOF while trying to read the status. But if the
server actually sends a flush packet (i.e., saying "now you have all of
the ref statuses" without actually sending any), then the client ends up
in this confused situation.
The fix is simple: we should return an error message from "send-pack
--helper-status", just like we would for any other error per-ref error
condition (in the test I included, the server simply omits all ref
status responses, but a more insidious version of this would skip only
some of them).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We read stdout from gpg into a strbuf, then split it into a list of
strbufs, pull out one element, and return it. But we don't free either
the original stdout buffer, nor the list returned from strbuf_split().
This patch fixes both. Note that we have to detach the returned string
from its strbuf before calling strbuf_list_free(), as that would
otherwise throw it away.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We xmemdupz() this buffer, but never free it. Let's do so. We'll use a
cleanup label, since there are multiple exits from the function.
Note that it was also declared a "const char *". We could switch that to
"char *" to indicate that it's allocated, but that make it awkward to
use with skip_prefix(). So instead, we'll introduce an extra non-const
pointer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We run a few operations and make sure they produce identical results
with and without sparse-index; the version we merged to the "next"
branch used the "-q" option to work around a breakage caused by a
version used at Microsoft with some unreleased changes, but since
we would want to make sure the commands produce identical results,
including reports given to the output that lists which commits were
picked, use of "-q" loses too much interesting information.
Let's drop "-q" from the command invocation and revisit the issue
when the problematic changes are upstreamed.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/gc.c has two ways of checking if multi-pack-index is enabled:
- git_config_get_bool() in incremental_repack_auto_condition()
- the_repository->settings.core_multi_pack_index in
maintenance_task_incremental_repack()
The two implementations have existed since the incremental-repack task
was introduced in e841a79a13 (maintenance: add incremental-repack auto
condition, 2020-09-25). These two values can diverge because
prepare_repo_settings() enables the feature in the_repository->settings
by default.
In the case where core.multiPackIndex is not set in the config, the auto
condition would fail, causing the incremental-repack task to not be
run. Because we always want to consider the default values, we should
always use the_repository->settings.
Standardize on using the_repository->settings.core_multi_pack_index to
check if multi-pack-index is enabled.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like the previous commit, change fsck to check the
"core_multi_pack_index" variable set in "repo-settings.c" instead of
reading the "core.multiPackIndex" config variable. This fixes a bug
where we wouldn't verify midx if the config key was missing. This bug
was introduced in 18e449f86b (midx: enable core.multiPackIndex by
default, 2020-09-25) where core.multiPackIndex was turned on by default.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change fsck to check the "core_commit_graph" variable set in
"repo-settings.c" instead of reading the "core.commitGraph" variable.
This fixes a bug where we wouldn't verify the commit-graph if the
config key was missing. This bug was introduced in
31b1de6a09 (commit-graph: turn on commit-graph by default, 2019-08-13),
where core.commitGraph was turned on by default.
Add tests to "t5318-commit-graph.sh" to verify that fsck checks the
commit-graph as expected for the 3 values of core.commitGraph. Also,
disable GIT_TEST_COMMIT_GRAPH in t/t0410-partial-clone.sh because some
test cases use fsck in ways that assume that commit-graph checking is
disabled.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function was added in 4981fe750b (pkt-line: share
buffer/descriptor reading implementation, 2013-02-23), but in
01f9ec64c8 (Use packet_reader instead of packet_read_line,
2018-12-29) the code that was using it was removed.
Since it's being removed we can in turn remove the "src" and "src_len"
arguments to packet_read(), all the remaining users just passed a
NULL/NULL pair to it.
That function is only a thin wrapper for packet_read_with_status()
which still needs those arguments, but for the thin packet_read()
convenience wrapper we can do away with it for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function was added in f1f4d8acf4 (pkt-line: add
packet_buf_write_len function, 2018-03-15) for use in
0f1dc53f45 (remote-curl: implement stateless-connect command,
2018-03-15).
In a97d00799a (remote-curl: use post_rpc() for protocol v2 also,
2019-02-21) that only user of it went away, let's remove it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a MIDX, we atomically move the new MIDX into place via
commit_lock_file(), but do not check to see if that call was successful.
Make sure that we do check in order to prevent us from incorrectly
reporting that we wrote a new MIDX if we actually encountered an error.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply similar treatment as in the last commit to the MIDX `repack`
operation.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before a new MIDX can be written, expire_midx_packs() first loads the
existing MIDX, figures out which packs can be expired, and then writes a
new MIDX based on that information.
In order to load the existing MIDX, it uses load_multi_pack_index(),
which mmaps the multi-pack-index file, but does not store the resulting
`struct multi_pack_index *` in the object store.
write_midx_internal() also needs to open the existing MIDX, and it does
so by iterating the results of get_multi_pack_index(), so that it reuses
the same pointer held by the object store. But before it can move the
new MIDX into place, it close_object_store() to munmap() the
multi-pack-index file to accommodate platforms like Windows which don't
allow overwriting files which are memory mapped.
That's where things get weird. Since expire_midx_packs has its own
*separate* memory mapped copy of the MIDX, the MIDX file is still memory
mapped! Interestingly, this doesn't seem to cause a problem in our
tests. (I believe that this has much more to do with my own lack of
familiarity with Windows than it does a lack of coverage in our tests).
In any case, we can side-step the whole issue by teaching
expire_midx_packs() to use the `struct multi_pack_index` pointer it
found via the object store instead of maintain its own copy. That way,
when write_midx_internal() calls `close_object_store()`, we know that
there are no memory mapped copies of the MIDX laying around.
A couple of other small notes about this patch:
- As far as I can tell, passing `local == 1` to the call to
load_multi_pack_index() was an error, since object_dir could be an
alternate. But it doesn't matter, since even though we write
`m->local = 1`, we never read that field back later on.
- Setting `m = NULL` after write_midx_internal() was likely to prevent
a double-free back from when that function took a `struct
multi_pack_index *` that it called close_midx() on itself. We can
rely on write_midx_internal() to call that for us now.
Finally, this enforces the same "the value of --object-dir must be the
local object store, or an alternate" rule from f57a739691 (midx: avoid
opening multiple MIDXs when writing, 2021-09-01) to the `expire`
sub-command, too.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first thing that write_midx_internal() does is load the MIDX
corresponding to the given object directory, if one is present.
Prepare for other functions in midx.c to do the same thing by extracting
that operation out to a small helper function.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tb/repack-write-midx:
test-read-midx: fix leak of bitmap_index struct
builtin/repack.c: pass `--refs-snapshot` when writing bitmaps
builtin/repack.c: make largest pack preferred
builtin/repack.c: support writing a MIDX while repacking
builtin/repack.c: extract showing progress to a variable
builtin/repack.c: rename variables that deal with non-kept packs
builtin/repack.c: keep track of existing packs unconditionally
midx: preliminary support for `--refs-snapshot`
builtin/multi-pack-index.c: support `--stdin-packs` mode
midx: expose `write_midx_file_only()` publicly
If we attempt to grep non-ascii log message text with an ascii pattern, we
run into the following issue:
$ git log --color --author='.var.*Bjar' -1 origin/master | grep ^Author
grep: (standard input): binary file matches
So, to fix this teach the grep code to use PCRE2_UTF, as long as the log
output is encoded in UTF-8.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Speed up the "lint-docs" target by making it non-.PHONY. Similar to my
c234e8a0ec (Makefile: make the "sparse" target non-.PHONY,
2021-09-23). We'll now create empty files corresponding to a
dependency graph for each of these lint scripts.
This speeds things up a bit[1], and makes the output correspond to any
in-tree changes we have:
$ touch git-add.txt; make lint-docs; make lint-docs
GEN cmd-list.made
GEN doc.dep
LINT GITLINK git-add.txt
LINT MAN END git-add.txt
LINT MAN SEC git-add.txt
make: Nothing to be done for 'lint-docs'.
As with the "sparse" target changes this has a hard dependency on the
use of ".DELETE_ON_ERROR" in the Makefile, added here in
db10fc6c09 (doc: simplify Makefile using .DELETE_ON_ERROR,
2021-05-21). This method also depends on the output for us emitting
any errors on STDERR (fixed in a preceding commit), as well us these
scripts exiting with non-zero on any errors (which they were already
doing).
1.
$ git show HEAD~:Documentation/Makefile >Makefile.old
$ hyperfine --warmup 2 -L f ",.old" 'make -j1 -f Makefile{f} lint-docs'
Benchmark #1: make -j1 -f Makefile lint-docs
Time (mean ± σ): 60.8 ms ± 1.4 ms [User: 58.7 ms, System: 2.5 ms]
Range (min … max): 58.9 ms … 64.0 ms 48 runs
Benchmark #2: make -j1 -f Makefile.old lint-docs
Time (mean ± σ): 84.0 ms ± 1.5 ms [User: 78.6 ms, System: 5.7 ms]
Range (min … max): 81.8 ms … 87.8 ms 35 runs
Summary
'make -j1 -f Makefile lint-docs' ran
1.38 ± 0.04 times faster than 'make -j1 -f Makefile.old lint-docs'
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the trick we use to speed up the "clean" target to also extend
to the "lint-docs" target. See 54df87555b (Documentation/Makefile:
conditionally include doc.dep, 2020-12-08) for the "clean"
implementation.
The "doc-lint" target only depends on *.txt files, so we don't need to
generate GIT-VERSION-FILE etc. if that's all we're doing. This makes
the "make lint-docs" target more than 2x as fast:
$ git show HEAD~:Documentation/Makefile >Makefile.old
$ hyperfine -L f ",.old" 'make -f Makefile{f} lint-docs'
Benchmark #1: make -f Makefile lint-docs
Time (mean ± σ): 100.2 ms ± 1.3 ms [User: 93.7 ms, System: 6.7 ms]
Range (min … max): 98.4 ms … 103.1 ms 29 runs
Benchmark #2: make -f Makefile.old lint-docs
Time (mean ± σ): 220.0 ms ± 20.0 ms [User: 206.0 ms, System: 18.0 ms]
Range (min … max): 206.6 ms … 267.5 ms 11 runs
Summary
'make -f Makefile lint-docs' ran
2.19 ± 0.20 times faster than 'make -f Makefile.old lint-docs'
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Have all of the scripts invoked by "make check-docs" emit their output
on STDERR. This does not currently matter due to the way we're
invoking them, but will in a subsequent change. It's a good idea to do
this in any case for consistency with other tools we invoke.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the broken "make lint-docs" (or "make check-docs" at the
top-level) target, which has been broken since my cafd9828e8 (doc
lint: lint and fix missing "GIT" end sections, 2021-04-09).
The CI for "seen" is emitting an error about a broken gitlink, but due
to there being 3x scripts chained via ";" instead of "&&" we're not
carrying forward the non-zero exit code.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 459b8d22e5 (tests: do not borrow from COPYING and README from the
real source, 2015-02-15) tests that used "lib-diff.sh" (called
"diff-lib.sh" then) were made to stop relying on the top-level COPYING
file, but we still had other tests that referenced it.
Let's move them over to use the "COPYING_test_data" utility function
introduced in the preceding commit, and in the case of the one test
that needed the "README" file use a ROT 13 version of that "COPYING"
test data. That test added in afd222967c (Extend testing git-mv for
renaming of subdirectories, 2006-07-26) just needs more test data that's not the same as the "COPYING" test data, so a ROT 13 version will do.
This change removes the last references to ../{README,COPYING} in the
test suite.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow-up the change in 459b8d22e5 (tests: do not borrow from COPYING
and README from the real source, 2015-02-15) by not shipping a full
copy of older versions of the top-level "COPYING" and "README" files.
The tests that use them just need the small blurb at the top of
"COPYING" as test data, or mock data that's dissimilar. Let's provide
that with a "COPYING_test_data" function instead.
We're not replacing this with some other generic test
data (e.g. "lorum ipsum") because these tests require test file header
to be the old "COPYING" file. See e.g. "t4003-diff-rename-1.sh" which
changes the file, and then does full "test_cmp" comparisons on the
resulting "git diff" output.
This change only changes tests that used the "lib-diff.sh" library,
but splits up what they need into a new "lib-diff-data.sh". A
subsequent commit will change related tests that were missed in
459b8d22e5.
For the test in "t4008-diff-break-rewrite.sh" the "README" file can go
away in favor of echoing the line "some dissimilar content" to a file
in the one test that needed it.
The point of that test is to start with files "A" and "B", and then
have A be more similar to the state of "B" than to its old version (by
copying over the content from the "COPYING" file). Just comparing the
pre-image of "some dissimilar content" and later a munged version of
the "COPYING" output serves that purpose.
While we're at it get rid of a stray "echo $tree" debugging line added
in 15d061b435 ([PATCH] Fix the way diffcore-rename records unremoved
source., 2005-05-27), and stop calling "hash-object" to get the hash
of an object we've just added to the index. We can instead extract
that information from the index itself with "rev-parse".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the code added in d6538246d3 (commit-graph: not compatible
with replace objects, 2018-08-20) which ignored replace objects in the
"write" command to ignore it in the "verify" command too.
We can just move this assignment to the cmd_commit_graph(), it
dispatches to "write" and "verify", and we're unlikely to ever get a
sub-command that would like to consider replace refs.
This will make tests added in eddc1f556c (mktag tests: test
update-ref and reachable fsck, 2021-06-17) pass in combination with
the "GIT_TEST_COMMIT_GRAPH" mode added in 859fdc0c3c (commit-graph:
define GIT_TEST_COMMIT_GRAPH, 2018-08-29), except that mode is
currently broken (but is being fixed concurrently). See the discussion
starting at [1].
1. https://lore.kernel.org/git/87wnmihswp.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 135a712375 (commit-graph: add --split option to builtin,
2019-06-18) this function was copy/pasted to the split commit-graph
tests, as in the preceding commit we need to fix this to use
&&-chaining, so it won't be hiding errors.
Unlike its sister function in "t5318-commit-graph.sh", which we got
lucky with, this one was hiding a real test failure. A tests added in
c523035cbd (commit-graph: allow cross-alternate chains, 2019-06-18)
has never worked as intended. Unlike most other graph_git_behavior
uses in this file it clones the repository into a sub-directory, so
we'll need to refer to "commits/6" as "origin/commits/6".
It's not easy to simply move the "graph_git_behavior" to the test
above it, since it itself spawns a "test_expect_success". Let's
instead add support to "graph_git_behavior()" and
"graph_git_two_modes()" to pass a "-C" argument to git.
We also need to add a "test -d fork" here, because otherwise we'll
fail on e.g.:
GIT_SKIP_TESTS=t5324.13 ./t5324-split-commit-graph.sh
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The graph_git_two_modes() helper added in 177722b344 (commit:
integrate commit graph with commit parsing, 2018-04-10) didn't
&&-chain its "git commit-graph" invocations, which as can be seen with
SANITIZE=leak will happily mark tests as passing if both of these
commands die, since test_cmp() will be comparing two empty files.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Try to re-chmod the trash directory on startup if we fail to "rm -rf"
it. This fixes problems where the test leaves the trash directory
behind in a bad permission state for whatever reason.
This fixes an interaction between [1] where t0004-unwritable.sh was
made to use "test_when_finished" for cleanup, and [2] which added the
"--immediate" mode. If a test in this file failed when running with
"--immediate" we wouldn't run the "test_when_finished" block, which
re-chmods the ".git/objects" directory (see [1]).
This can be demonstrated as e.g. (output snipped for less verbosity):
$ ./t0004-unwritable.sh --run=3 --immediate
ok 1 # skip setup (--run)
ok 2 # skip write-tree should notice unwritable repository (--run)
not ok 3 - commit should notice unwritable repository
[...]
$ ./t0004-unwritable.sh --run=3 --immediate
rm: cannot remove '[...]/trash directory.t0004-unwritable/.git/objects/info': Permission denied
FATAL: Cannot prepare test area
[...]
Instead of some version of reverting [1] let's make the test-lib.sh
resilient to this edge-case, it will happen due to [1], but also
e.g. if the relevant "test-lib.sh" process is kill -9'd during the
test run. We should try harder to recover in this case. If we fail to
remove the test directory let's retry after (re-)chmod-ing it.
This doesn't need to be guarded by something that's equivalent to
"POSIXPERM" since if we don't support "chmod" we were about to fail
anyway.
Let's also discard any error output from (a possibly nonexisting)
"chmod", we'll fail on the subsequent "rm -rf" anyway, likewise for
the first "rm -rf" invocation, we don't want to get the "cannot
remove" output if we can get around it with the "chmod", but we do
want any error output from the second "rm -rf", in case that doesn't
fix the issue.
The lack of &&-chaining between the "chmod" and "rm -rf" is
intentional, if we fail the first "rm -rf", can't chmod, but then
succeed the second time around that's what we were hoping for. We just
want to nuke the directory, not carry forward every possible error
code or error message.
1. dbda967684 (t0004 (unwritable files): simplify error handling,
2010-09-06)
2. b586744a86 (test: skip clean-up when running under --immediate
mode, 2011-06-27)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode added in
956d2e4639 (tests: add a test mode for SANITIZE=leak, run it in CI,
2021-09-23) to use a TAP "Bail out!" message when exiting. This will
cause the test run to exit immediately under a TAP consumer like
"prove(1)".
See 614fe01521 (test-lib: bail out when "-v" used under "prove",
2016-10-22) for the initial introduction of "Bail out!" to the
--verbose being amended here.
Before this compiling with "SANITIZE=" and running the tests with
"prove(1)" would cause all the tests to be run to the end (output
trimmed for fewer columns):
$ GIT_TEST_PASSING_SANITIZE_LEAK=true make
rm -f -r 'test-results'
*** prove ***
t0000-basic.sh ......... Dubious, test returned 1 (wstat 256, 0x100)
No subtests run
t0001-init.sh .......... Dubious, test returned 1 (wstat 256, 0x100)
No subtests run
[...output where we list every single t[0-9]*.sh file as failing snipped]
Whereas now we'll fail early, like this ("->" line wrapping added):
$ GIT_TEST_PASSING_SANITIZE_LEAK=true make
[...]
t0000-basic.sh ..................................... Bailout called. Further testing stopped:
-> GIT_TEST_PASSING_SANITIZE_LEAK=true has no effect except when compiled with SANITIZE=leak
FAILED--Further testing stopped: GIT_TEST_PASSING_SANITIZE_LEAK=true has no effect except
-> when compiled with SANITIZE=leak
make: *** [Makefile:53: prove] Error 1
This change also adds a red color to the "Bailout called" line, as
we're now using "say_color error". That improves existing output in
the case of e.g.:
$ prove -j8 t[0-9]*.sh :: -v
Bailout called. Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
FAILED--Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
We don't need to have a "Bail out! " prefix when we're not running
under a TAP consumer (i.e. if test -n "$HARNESS_ACTIVE"), but let's
not make the output conditional on that. Showing it under e.g.:
$ GIT_TEST_PASSING_SANITIZE_LEAK=true ./t0095-bloom.sh
Bail out! GIT_TEST_PASSING_SANITIZE_LEAK=true has no effect except when compiled with SANITIZE=leak
Doesn't harm anything, and I don't think the (small) complexity of
only adding this if we're under "$HARNESS_ACTIVE" is worth it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
De-duplicate the "finalize_junit_xml; GIT_EXIT_OK=t; exit 1" code
shared between the "error()" and "--immediate on failure" code paths,
in preparation for adding a third user in a subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few kinds of changes "git status" can show were not documented.
* ja/doc-status-types-and-copies:
Documentation/git-status: mention how to detect copies
Documentation/git-status: document porcelain status T (typechange)
Documentation/diff-format: state in which cases porcelain status is T
Documentation/git-status: remove impossible porcelain status DR and DC
Prevent "make sparse" from running for the source files that
haven't been modified.
* ab/make-sparse-for-real:
Makefile: make the "sparse" target non-.PHONY
When "git cmd -h" shows more than one line of usage text (e.g.
the cmd subcommand may take sub-sub-command), parse-options API
learned to align these lines, even across i18n/l10n.
* ab/align-parse-options-help:
parse-options: properly align continued usage output
git rev-parse --parseopt tests: add more usagestr tests
send-pack: properly use parse_options() API for usage string
parse-options API users: align usage output in C-strings
Teach "git help -c" into helping the command line completion of
configuration variables.
* ab/help-config-vars:
help: move column config discovery to help.c library
help / completion: make "git help" do the hard work
help tests: test --config-for-completion option & output
help: simplify by moving to OPT_CMDMODE()
help: correct logic error in combining --all and --guides
help: correct logic error in combining --all and --config
help tests: add test for --config output
help: correct usage & behavior of "git help --guides"
help: correct the usage string in -h and documentation
Built-in fsmonitor (part 1).
* jh/builtin-fsmonitor-part1:
t/helper/simple-ipc: convert test-simple-ipc to use start_bg_command
run-command: create start_bg_command
simple-ipc/ipc-win32: add Windows ACL to named pipe
simple-ipc/ipc-win32: add trace2 debugging
simple-ipc: move definition of ipc_active_state outside of ifdef
simple-ipc: preparations for supporting binary messages.
trace2: add trace2_child_ready() to report on background children
Mostly preliminary clean-up in the hook API.
* ab/config-based-hooks-1:
hook-list.h: add a generated list of hooks, like config-list.h
hook.c users: use "hook_exists()" instead of "find_hook()"
hook.c: add a hook_exists() wrapper and use it in bugreport.c
hook.[ch]: move find_hook() from run-command.c to hook.c
Makefile: remove an out-of-date comment
Makefile: don't perform "mv $@+ $@" dance for $(GENERATED_H)
Makefile: stop hardcoding {command,config}-list.h
Makefile: mark "check" target as .PHONY
Updates to the tests in t0000 to test the test framework.
* ab/lib-subtest:
test-lib tests: get rid of copy/pasted mock test code
test-lib tests: assert 1 exit code, not non-zero
test-lib tests: refactor common part of check_sub_test_lib_test*()
test-lib tests: avoid subshell for "test_cmp" for readability
test-lib tests: don't provide a description for the sub-tests
test-lib tests: split up "write and run" into two functions
test-lib tests: move "run_sub_test" to a new lib-subtest.sh
Various fixes in code paths that move untracked files away to make room.
* en/removing-untracked-fixes:
Documentation: call out commands that nuke untracked files/directories
Comment important codepaths regarding nuking untracked files/dirs
unpack-trees: avoid nuking untracked dir in way of locally deleted file
unpack-trees: avoid nuking untracked dir in way of unmerged file
Change unpack_trees' 'reset' flag into an enum
Remove ignored files by default when they are in the way
unpack-trees: make dir an internal-only struct
unpack-trees: introduce preserve_ignored to unpack_trees_options
read-tree, merge-recursive: overwrite ignored files by default
checkout, read-tree: fix leak of unpack_trees_options.dir
t2500: add various tests for nuking untracked files
"git grep --recurse-submodules" takes trees and blobs from the
submodule repository, but the textconv settings when processing a
blob from the submodule is not taken from the submodule repository.
A test is added to demonstrate the issue, without fixing it.
* mt/grep-submodule-textconv:
grep: demonstrate bug with textconv attributes and submodules
"git add", "git mv", and "git rm" have been adjusted to avoid
updating paths outside of the sparse-checkout definition unless
the user specifies a "--sparse" option.
* ds/add-rm-with-sparse-index:
advice: update message to suggest '--sparse'
mv: refuse to move sparse paths
rm: skip sparse paths with missing SKIP_WORKTREE
rm: add --sparse option
add: update --renormalize to skip sparse paths
add: update --chmod to skip sparse paths
add: implement the --sparse option
add: skip tracked paths outside sparse-checkout cone
add: fail when adding an untracked sparse file
dir: fix pattern matching on dirs
dir: select directories correctly
t1092: behavior for adding sparse files
t3705: test that 'sparse_entry' is unstaged
A link to the bundle-format was added in 5c8273d57c (bundle doc: rewrite
the "DESCRIPTION" section, 2021-07-31).
Ensure `technical/bundle-format.html` is created to avoid a broken link
in `git-bundle.html`.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users often use "git difftool HEAD^" to review their work, and have
"mergetool.prompt" set to false so that difftool does not prompt them
before diffing each file.
This is very convenient because users can see all their diffs by
reviewing the xxdiff windows one at a time.
A problem occurs when xxdiff encounters some binary files.
It can segfault and return exit code 128, which is special-cased
by git-difftool-helper as being an extraordinary situation that
aborts the process.
Suppress the exit code from xxdiff in its diff_cmd() implementation
when we see exit code 128 so that the GIT_EXTERNAL_DIFF loop continues
on uninterrupted to the next file rather than aborting when it
encounters the first binary file.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak introduced in 9055e401dd (sequencer: introduce new
commands to reset the revision, 2018-04-25), which called
setup_unpack_trees_porcelain() without a corresponding call to
clear_unpack_trees_porcelain().
This introduces a change in behavior in that we now start calling
clear_unpack_trees_porcelain() even without having called the
setup_unpack_trees_porcelain(). That's OK, that clear function, like
most others, will accept a zero'd out struct.
This inches us closer to passing various tests in
"t34*.sh" (e.g. "t3434-rebase-i18n.sh"), but because they have so many
other memory leaks in revisions.c this doesn't make any test file or
even a single test pass.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Restructure code that's mostly added in 9055e401dd (sequencer:
introduce new commands to reset the revision, 2018-04-25) to avoid
code duplication, and to make freeing other resources easier in a
subsequent commit.
It's safe to initialize "tree_desc" to be zero'd out in order to
unconditionally free desc.buffer, it won't be initialized on the first
couple of "goto"'s.
There are three earlier "return"'s in this function which should
probably be made to use this new "cleanup" too, per [1] it looks like
they're leaving behind stale locks. But let's not try to fix every
potential bug here now, I'm just trying to narrowly plug a memory
leak.
1. https://lore.kernel.org/git/CABPp-BH=3DP-dXRCphY53-3eZd1TU8h5GY_M12nnbEGm-UYB9Q@mail.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On the Windows build agents, a lot of programs are installed, and added
to the PATH automatically.
One such program is Git for Windows, and due to the way it is set up,
unfortunately its copy of `gpg.exe` is also reachable via the PATH.
This usually does not pose any problems. To the contrary, it even allows
us to test the GPG parts of Git's test suite even if `gpg.exe` is not
delivered as part of `git-sdk-64-minimal`, the minimal subset of Git for
Windows' SDK that we use in the CI builds to compile Git.
However, every once in a while we build a new MSYS2 runtime, which means
that there is a mismatch between the copy in `git-sdk-64-minimal` and
the copy in C:\Program Files\Git\usr\bin. When that happens we hit the
dreaded problem where only one `msys-2.0.dll` is expected to be in the
PATH, and things start to fail.
Let's avoid all of this by restricting the PATH to the minimal set. This
is actually done by `git-sdk-64-minimal`'s `/etc/profile`, and we just
have to source this file manually (one would expect that it is sourced
automatically, but the Bash steps in Azure Pipelines/GitHub workflows
are explicitly run using `--noprofile`, hence the need for doing this
explicitly).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
facca53ac added verification for ssh signatures but incorrectly
described the usage of gpg.minTrustLevel. While the verifications
trustlevel is stil set to fully or undefined depending on if the key is
known or not it has no effect on the verification result. Unknown keys
will always fail verification. This commit updates the docs to match
this behaviour.
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A signature attached to a signed commit, and the contents of the
commit that merged a signed tag, are both recorded as a value of an
object header field as a multi-line value, and are subject to the
formatting convention for multi-line values in the headers, with a
leading SP signaling that the rest of the line is a continuation of
the previous line. Most notably, an empty line in such a multi-line
value would result in a line with a sole SP on it.
Examples in the signature-format technical documentation include a
few of these cases but we did not show these otherwise invisible SPs
in the example. These trailing spaces cannot be seen on display or
on paper, and forces the readers to look for them in their editors
or pagers, even if we added them to the document.
Extend the overview section to explain the multi-line value
formatting and highlight these otherwise invisible SPs by inventing
the "a dollar-sign at the end of line that appears after SP merely
signals that there is a SP there, and the dollar-sign itself does
not appear in the real file" notation, inspired by "cat -e" output,
to help readers to learn exactly where such "a single SP that is
originally an empty line" appears in the examples.
Reported-by: Rob Browning <rlb@defaultvalue.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*{mktree,commit,diff,grep,rm,merge,hunk}*"
as passing when git is compiled with SANITIZE=leak. They'll now be
listed as running under the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test
mode (the "linux-leaks" CI target).
These were picked because we still have a lot of failures in adjacent
areas, and we didn't have much if any coverage of e.g. grep and diff
before this change, we could still whitelist a lot more tests, but
let's stop for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark various "generic" tests as passing when git is compiled with
SANITIZE=leak. These tests were subjectively picked from the lists of
passing tests since they're all small, and test some generic feature
such as wildmatch(), commonly used environment variables, ident
parsing etc.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*read-tree*" as passing when git is
compiled with SANITIZE=leak. They'll now be listed as running under
the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks"
CI target). We still have around half the tests that match
"*read-tree*" failing, but let's whitelist those that don't.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*ls-files*" as passing when git is
compiled with SANITIZE=leak. They'll now be listed as running under
the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks"
CI target). We still have others that match '*ls-files*" that fail
under SANITIZE=leak.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*{checkout,switch}*" as passing when git
is compiled with SANITIZE=leak. They'll now be listed as running under
the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks"
CI target).
Unfortunately almost all of those tests fail when compiled with
SANITIZE=leak, these only pass because they run "checkout-index", not
the main "checkout" command.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark all tests that match "*trace2*" as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark those tests that match "*ls-tree*" as passing when git is
compiled with SANITIZE=leak. They'll now be listed as running under
the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks"
CI target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark various existing tests in t00*.sh that invoke a "test-tool" with
as passing when git is compiled with SANITIZE=leak.
They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark various existing tests in t00*.sh that invoke git built-ins with
TEST_PASSES_SANITIZE_LEAK=true as passing when git is compiled with
SANITIZE=leak.
They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Protocol v0 clients can get stuck parsing a malformed feature line.
* ah/connect-parse-feature-v0-fix:
connect: also update offset for features without values
"make clean" has been updated to remove leftover .depend/
directories, even when it is not told to use them to compute header
dependencies.
* ab/make-clean-depend-dirs:
Makefile: clean .depend dirs under COMPUTE_HEADER_DEPENDENCIES != yes
Sensitive data in the HTTP trace were supposed to be redacted, but
we failed to do so in HTTP/2 requests.
* jk/http-redact-fix:
http: match headers case-insensitively when redacting
"git cvsserver" had a long-standing bug in its authentication code,
which has finally been corrected (it is unclear and is a separate
question if anybody is seriously using it, though).
* cb/cvsserver:
Documentation: cleanup git-cvsserver
git-cvsserver: protect against NULL in crypt(3)
git-cvsserver: use crypt correctly to compare password hashes
"git clone" from a repository whose HEAD is unborn into a bare
repository didn't follow the branch name the other side used, which
is corrected.
* jk/clone-unborn-head-in-bare:
clone: handle unborn branch in bare repos
"git stash", where the tentative change involves changing a
directory to a file (or vice versa), was confused, which has been
corrected.
* en/stash-df-fix:
stash: restore untracked files AFTER restoring tracked files
stash: avoid feeding directories to update-index
t3903: document a pair of directory/file bugs
When "git am --abort" fails to abort correctly, it still exited
with exit status of 0, which has been corrected.
* en/am-abort-fix:
am: fix incorrect exit status on am fail to abort
t4151: add a few am --abort tests
git-am.txt: clarify --abort behavior
"git update-ref --stdin" failed to flush its output as needed,
which potentially led the conversation to a deadlock.
* ps/update-ref-batch-flush:
t1400: avoid SIGPIPE race condition on fifo
update-ref: fix streaming of status updates
The "mode" word is useless in a call to open(2) that does not
create a new file. Such a call in the files backend of the ref
subsystem has been cleaned up.
* rs/no-mode-to-open-when-appending:
refs/files-backend: remove unused open mode parameter
The order in which various files that make up a single (conceptual)
packfile has been reevaluated and straightened up. This matters in
correctness, as an incomplete set of files must not be shown to a
running Git.
* tb/pack-finalize-ordering:
pack-objects: rename .idx files into place after .bitmap files
pack-write: split up finish_tmp_packfile() function
builtin/index-pack.c: move `.idx` files into place last
index-pack: refactor renaming in final()
builtin/repack.c: move `.idx` files into place last
pack-write.c: rename `.idx` files after `*.rev`
pack-write: refactor renaming in finish_tmp_packfile()
bulk-checkin.c: store checksum directly
pack.h: line-wrap the definition of finish_tmp_packfile()
The code that optionally creates the *.rev reverse index file has
been optimized to avoid needless computation when it is not writing
the file out.
* ab/reverse-midx-optim:
pack-write: skip *.rev work when not writing *.rev
The "git apply -3" code path learned not to bother the lower level
merge machinery when the three-way merge can be trivially resolved
without the content level merge.
* jc/trivial-threeway-binary-merge:
apply: resolve trivial merge without hitting ll-merge with "--3way"
Doc update plus improved error reporting.
* jk/log-warn-on-bogus-encoding:
docs: use "character encoding" to refer to commit-object encoding
logmsg_reencode(): warn when iconv() fails
The output from "git fast-export", when its anonymization feature
is in use, showed an annotated tag incorrectly.
* tk/fast-export-anonymized-tag-fix:
fast-export: fix anonymized tag using original length
Even when running "git send-email" without its own threaded
discussion support, a threading related header in one message is
carried over to the subsequent message to result in an unwanted
threading, which has been corrected.
* mh/send-email-reset-in-reply-to:
send-email: avoid incorrect header propagation
Buggy tests could damage repositories outside the throw-away test
area we created. We now by default export GIT_CEILING_DIRECTORIES
to limit the damage from such a stray test.
* sg/set-ceiling-during-tests:
test-lib: set GIT_CEILING_DIRECTORIES to protect the surrounding repository
The sparse-index support can corrupt the index structure by storing
a stale and/or uninitialized data, which has been corrected.
* jh/sparse-index-resize-fix:
sparse-index: copy dir_hash in ensure_full_index()
"git upload-pack" which runs on the other side of "git fetch"
forgot to take the ref namespaces into account when handling
want-ref requests.
* ka/want-ref-in-namespace:
docs: clarify the interaction of transfer.hideRefs and namespaces
upload-pack.c: treat want-ref relative to namespace
t5730: introduce fetch command helper
Build update for Apple clang.
* cb/makefile-apple-clang:
build: catch clang that identifies itself as "$VENDOR clang"
build: clang version may not be followed by extra words
build: update detect-compiler for newer Xcode version
"git branch -D <branch>" used to refuse to remove a broken branch
ref that points at a missing commit, which has been corrected.
* rs/branch-allow-deleting-dangling:
branch: allow deleting dangling branches with --force
The delayed checkout code path in "git checkout" etc. were chatty
even when --quiet and/or --no-progress options were given.
* mt/quiet-with-delayed-checkout:
checkout: make delayed checkout respect --quiet and --no-progress
"git diff --relative" segfaulted and/or produced incorrect result
when there are unmerged paths.
* dd/diff-files-unmerged-fix:
diff-lib: ignore paths that are outside $cwd if --relative asked
mmap() imitation used to call xmalloc() that dies upon malloc()
failure, which has been corrected to just return an error to the
caller to be handled.
* rs/git-mmap-uses-malloc:
compat: let git_mmap use malloc(3) directly
Various bugs in "git rebase -r" have been fixed.
* pw/rebase-r-fixes:
rebase -r: fix merge -c with a merge strategy
rebase -r: don't write .git/MERGE_MSG when fast-forwarding
rebase -i: add another reword test
rebase -r: make 'merge -c' behave like reword
Checking out all the paths from HEAD during the last conflicted
step in "git rebase" and continuing would cause the step to be
skipped (which is expected), but leaves MERGE_MSG file behind in
$GIT_DIR and confuses the next "git commit", which has been
corrected.
* pw/rebase-skip-final-fix:
rebase --continue: remove .git/MERGE_MSG
rebase --apply: restore some tests
t3403: fix commit authorship
Use upload-artifacts v1 (instead of v2) for 32-bit linux, as the
new version has a blocker bug for that architecture.
* cb/ci-use-upload-artifacts-v1:
ci: use upload-artifacts v1 for dockerized jobs
"git commit --fixup" now works with "--edit" again, after it was
broken in v2.32.
* jk/commit-edit-fixup-fix:
commit: restore --edit when combined with --fixup
"git range-diff" code clean-up.
* jk/range-diff-fixes:
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
"git apply" miscounted the bytes and failed to read to the end of
binary hunks.
* jk/apply-binary-hunk-parsing-fix:
apply: keep buffer/size pair in sync when parsing binary hunks
"git pull" had various corner cases that were not well thought out
around its --rebase backend, e.g. "git pull --ff-only" did not stop
but went ahead and rebased when the history on other side is not a
descendant of our history. The series tries to fix them up.
* en/pull-conflicting-options:
pull: fix handling of multiple heads
pull: update docs & code for option compatibility with rebasing
pull: abort by default when fast-forwarding is not possible
pull: make --rebase and --no-rebase override pull.ff=only
pull: since --ff-only overrides, handle it first
pull: abort if --ff-only is given and fast-forwarding is impossible
t7601: add tests of interactions with multiple merge heads and config
t7601: test interaction of merge/rebase/fast-forward flags and options
Bugfix for common ancestor negotiation recently introduced in "git
push" codepath.
* jt/push-negotiation-fixes:
fetch: die on invalid --negotiation-tip hash
send-pack: fix push nego. when remote has refs
send-pack: fix push.negotiate with remote helper
Input validation of "git pack-objects --stdin-packs" has been
corrected.
* ab/pack-stdin-packs-fix:
pack-objects: fix segfault in --stdin-packs option
pack-objects tests: cover blindspots in stdin handling
"git maintenance" scheduler fix for macOS.
* js/maintenance-launchctl-fix:
maintenance: skip bootout/bootstrap when plist is registered
maintenance: create `launchctl` configuration using a lock file
Update to the command line completion (in contrib/) for tcsh.
* ti/tcsh-completion-regression-fix:
completion: tcsh: Fix regression by drop of wrapper functions
Command line completion updates.
* fc/completion-updates:
completion: bash: add correct suffix in variables
completion: bash: fix for multiple dash commands
completion: bash: fix for suboptions with value
completion: bash: fix prefix detection in branch.*
Documentation updates.
* en/merge-strategy-docs:
Update error message and code comment
merge-strategies.txt: add coverage of the `ort` merge strategy
git-rebase.txt: correct out-of-date and misleading text about renames
merge-strategies.txt: fix simple capitalization error
merge-strategies.txt: avoid giving special preference to patience algorithm
merge-strategies.txt: do not imply using copy detection is desired
merge-strategies.txt: update wording for the resolve strategy
Documentation: edit awkward references to `git merge-recursive`
directory-rename-detection.txt: small updates due to merge-ort optimizations
git-rebase.txt: correct antiquated claims about --rebase-merges
When the option --dry-run/-n is given, "git add" doesn't change the
index, but still writes out new object files. Only hash the latter
without writing instead to make the run as dry as possible.
Use this opportunity to also make the hash_flags variable unsigned,
to match the index_path() parameter it is used as.
Reported-by: git.mexon@spamgourmet.com
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in the error output emitted when .git/objects can't
be written to. Before 9c4d6c0297 (cache-tree: Write updated
cache-tree after commit, 2014-07-13) we'd emit only one "insufficient
permission" error, now we'll do so again.
The cause is rather straightforward, we've got WRITE_TREE_SILENT for
the use-case of wanting to prepare an index silently, quieting any
permission etc. error output. Then when we attempt to update to
that (possibly broken) index we'll run into the same errors again.
But with 9c4d6c0297 the gap between the cache-tree API and the object
store wasn't closed in terms of asking write_object_file() to be
silent. I.e. post-9c4d6c0297b the first call is to prepare_index(),
and after that we'll call prepare_to_commit(). We only want verbose
error output from the latter.
So let's add and use that facility with a corresponding HASH_SILENT
flag, its only user is cache-tree.c's update_one(), which will set it
if its "WRITE_TREE_SILENT" flag is set.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for fixing a regression where we started emitting some
of these error messages twice, let's assert what the output from "git
commit" and friends is now in the case of permission errors.
As noted in [1] using test_expect_failure to mark up a TODO test has
some unexpected edge cases, e.g. we don't want to break --run=3 by
skipping the "test_lazy_prereq" here. This pattern allows us to test
just the test_cmp (and the "cat", which shouldn't fail) with the added
"test_expect_failure", we'll flip that to a "test_expect_success" in
the next commit.
1. https://lore.kernel.org/git/87tuhmk19c.fsf@evledraar.gmail.com/T/#u
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When merging a signed tag fmt-merge-msg was unable to verify its
validity missing the necessary ssh allowedSignersFile config.
Adds gpg config parsing to fmt-merge-msg.
Adds tests for ssh signed tags to fmt-merge-msg tests.
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fs/ssh-signing:
ssh signing: test that gpg fails for unknown keys
ssh signing: tests for logs, tags & push certs
ssh signing: duplicate t7510 tests for commits
ssh signing: verify signatures using ssh-keygen
ssh signing: provide a textual signing_key_id
ssh signing: retrieve a default key from ssh-agent
ssh signing: add ssh key format and signing code
ssh signing: add test prereqs
ssh signing: preliminary refactoring and clean-up
Turn off automatic background maintenance for perf tests by default to
avoid interference with performance measurements. Do that by using the
new file t/perf/config and using it as the system config file for perf
tests. Future tests intended to measure gc performance can override
the setting locally or call "git gc" explicitly.
This fixes a breakage in p2000 caused by gc automatically emptying the
reflog due its fake dates from 2005 being older than 90 days.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up in "git difftool".
* da/difftool:
difftool: add a missing space to the run_dir_diff() comments
difftool: remove an unnecessary call to strbuf_release()
difftool: refactor dir-diff to write files using helper functions
difftool: create a tmpdir path without repeated slashes
CI learns to run the leak sanitizer builds.
* ab/sanitize-leak-ci:
tests: add a test mode for SANITIZE=leak, run it in CI
Makefile: add SANITIZE=leak flag to GIT-BUILD-OPTIONS
The ref iteration code used to optionally allow dangling refs to be
shown, which has been tightened up.
* jk/ref-paranoia:
refs: drop "broken" flag from for_each_fullref_in()
ref-filter: drop broken-ref code entirely
ref-filter: stop setting FILTER_REFS_INCLUDE_BROKEN
repack, prune: drop GIT_REF_PARANOIA settings
refs: turn on GIT_REF_PARANOIA by default
refs: omit dangling symrefs when using GIT_REF_PARANOIA
refs: add DO_FOR_EACH_OMIT_DANGLING_SYMREFS flag
refs-internal.h: reorganize DO_FOR_EACH_* flag documentation
refs-internal.h: move DO_FOR_EACH_* flags next to each other
t5312: be more assertive about command failure
t5312: test non-destructive repack
t5312: create bogus ref as necessary
t5312: drop "verbose" helper
t5600: provide detached HEAD for corruption failures
t5516: don't use HEAD ref for invalid ref-deletion tests
t7900: clean up some more broken refs
Compilation fix.
* js/win-lazyload-buildfix:
Makefile: restrict -Wpedantic and -Wno-pedantic-ms-format better
lazyload.h: use an even more generic function pointer than FARPROC
lazyload.h: fix warnings about mismatching function pointer types
Test updates.
* sg/test-split-index-fix:
read-cache: fix GIT_TEST_SPLIT_INDEX
tests: disable GIT_TEST_SPLIT_INDEX for sparse index tests
read-cache: look for shared index files next to the index, too
t1600-index: disable GIT_TEST_SPLIT_INDEX
t1600-index: don't run git commands upstream of a pipe
t1600-index: remove unnecessary redirection
"git multi-pack-index write --bitmap" learns to propagate the
hashcache from original bitmap to resulting bitmap.
* tb/midx-write-propagate-namehash:
t5326: test propagating hashcache values
p5326: generate pack bitmaps before writing the MIDX bitmap
p5326: don't set core.multiPackIndex unnecessarily
p5326: create missing 'perf-tag' tag
midx.c: respect 'pack.writeBitmapHashcache' when writing bitmaps
pack-bitmap.c: propagate namehash values from existing bitmaps
t/helper/test-bitmap.c: add 'dump-hashes' mode
Since C++20, the language has a generalized comparison operator <=>.
Teach the cpp driver not to separate it into <= and > tokens.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since C++17, the single-quote can be used as digit separator:
3.141'592'654
1'000'000
0xdead'beaf
Make it known to the word regex of the cpp driver, so that numbers are
not split into separate tokens at the single-quotes.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are going to add support for C++'s digit-separating single-quote and
the spaceship operator. By adding the test cases in this separate
commit, the effect on the word highlighting will become more obvious
as the features are implemented and the file cpp/expect is updated.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "cat-file --batch-all-objects" iterates over each object, it knows
where to find each one. But when we look up details of the object, we
don't use that information at all.
This patch teaches it to use the pack/offset pair when we're iterating
over objects in a pack. This yields a measurable speed improvement
(timings on a fully packed clone of linux.git):
Benchmark #1: ./git.old cat-file --batch-all-objects --unordered --batch-check="%(objecttype) %(objectname)"
Time (mean ± σ): 8.128 s ± 0.118 s [User: 7.968 s, System: 0.156 s]
Range (min … max): 8.007 s … 8.301 s 10 runs
Benchmark #2: ./git.new cat-file --batch-all-objects --unordered --batch-check="%(objecttype) %(objectname)"
Time (mean ± σ): 4.294 s ± 0.064 s [User: 4.167 s, System: 0.125 s]
Range (min … max): 4.227 s … 4.457 s 10 runs
Summary
'./git.new cat-file --batch-all-objects --unordered --batch-check="%(objecttype) %(objectname)"' ran
1.89 ± 0.04 times faster than './git.old cat-file --batch-all-objects --unordered --batch-check="%(objecttype) %(objectname)"
The implementation is pretty simple: we just call packed_object_info()
instead of oid_object_info_extended() when we can. Most of the changes
are just plumbing the pack/offset pair through the callstack. There is
one subtlety: replace lookups are not handled by packed_object_info().
But since those are disabled for --batch-all-objects, and since we'll
only have pack info when that option is in effect, we don't have to
worry about that.
There are a few limitations to this optimization which we could address
with further work:
- I didn't bother recording when we found an object loose. Technically
this could save us doing a fruitless lookup in the pack index. But
opening and mmap-ing a loose object is so expensive in the first
place that this doesn't matter much. And if your repository is large
enough to care about per-object performance, most objects are going
to be packed anyway.
- This works only in --unordered mode. For the sorted mode, we'd have
to record the pack/offset pair as part of our oid-collection. That's
more code, plus at least 16 extra bytes of heap per object. It would
probably still be a net win in runtime, but we'd need to measure.
- For --batch, this still helps us with getting the object metadata,
but we still do a from-scratch lookup for the object contents. This
probably doesn't matter that much, because the lookup cost will be
much smaller relative to the cost of actually unpacking and printing
the objects.
For small objects, we could probably swap out read_object_file() for
using packed_object_info() with a "object_info.contentp" to get the
contents. But we'd still need to deal with streaming for larger
objects. A better path forward here is to teach the initial
oid_object_info_extended() / packed_object_info() calls to retrieve
the contents of smaller objects while they are already being
accessed. That would save the extra lookup entirely. But it's a
non-trivial feature to add to the object_info code, so I left it for
now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we originally added --batch-all-objects, it stuffed everything into
an oid_array(), and then iterated over that array with a callback to
write the actual output.
When we later added --unordered, that code path writes immediately as we
discover each object, but just calls the same batch_object_cb() as our
entry point to the writing code. That callback has a narrow interface;
it only receives the oid, but we know much more about each object in the
unordered write (which we'll make use of in the next patch). So let's
just call batch_object_write() directly. The callback wasn't saving us
much effort.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we're enumerating all objects in the object database, it doesn't
make sense to respect refs/replace. The point of this option is to
enumerate all of the objects in the database at a low level. By
definition we'd already show the replacement object's contents (under
its real oid), and showing those contents under another oid is almost
certainly working against what the user is trying to do.
Note that you could make the same argument for something like:
git show-index <foo.idx |
awk '{print $2}' |
git cat-file --batch
but there we can't know in cat-file exactly what the user intended,
because we don't know the source of the input. They could be trying to
do low-level debugging, or they could be doing something more high-level
(e.g., imagine a porcelain built around cat-file for its object
accesses). So in those cases, we'll have to rely on the user specifying
"git --no-replace-objects" to tell us what to do.
One _could_ make an argument that "cat-file --batch" is sufficiently
low-level plumbing that it should not respect replace-objects at all
(and the caller should do any replacement if they want it). But we have
been doing so for some time. The history is a little tangled:
- looking back as far as v1.6.6, we would not respect replace refs for
--batch-check, but would for --batch (because the former used
sha1_object_info(), and the replace mechanism only affected actual
object reads)
- this discrepancy was made even weirder by 98e2092b50 (cat-file:
teach --batch to stream blob objects, 2013-07-10), where we always
output the header using the --batch-check code, and then printed the
object separately. This could lead to "cat-file --batch" dying (when
it notices the size or type changed for a non-blob object) or even
producing bogus output (in streaming mode, we didn't notice that we
wrote the wrong number of bytes).
- that persisted until 1f7117ef7a (sha1_file: perform object
replacement in sha1_object_info_extended(), 2013-12-11), which then
respected replace refs for both forms.
So it has worked reliably this way for over 7 years, and we should make
sure it continues to do so. That could also be an argument that
--batch-all-objects should not change behavior (which this patch is
doing), but I really consider the current behavior to be an unintended
bug. It's a side effect of how the code is implemented (feeding the oids
back into oid_object_info() rather than looking at what we found while
reading the loose and packed object storage).
The implementation is straight-forward: we just disable the global
read_replace_refs flag when we're in --batch-all-objects mode. It would
perhaps be a little cleaner to change the flag we pass to
oid_object_info_extended(), but that's not enough. We also read objects
via read_object_file() and stream_blob_to_fd(). The former could switch
to its _extended() form, but the streaming code has no mechanism for
disabling replace refs. Setting the global flag works, and as a bonus,
it's impossible to have any "oops, we're sometimes replacing the object
and sometimes not" bugs in the output (like the ones caused by
98e2092b50 above).
The tests here cover the regular-input and --batch-all-objects cases,
for both --batch-check and --batch. There is a test in t6050 that covers
the regular-input case with --batch already, but this new one goes much
further in actually verifying the output (plus covering --batch-check
explicitly). This is perhaps a little overkill and the tests would be
simpler just covering --batch-check, but I wanted to make sure we're
checking that --batch output is consistent between the header and the
content. The global-flag technique used here makes that easy to get
right, but this is future-proofing us against regressions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The note on ordering for --batch-all-objects was written when that was
the only possible ordering. These days we have --unordered, too, so
let's point to it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few of the tests create intentionally broken objects with broken
types. Let's clean them up after we're done with them, so that later
tests don't get confused (we hadn't noticed because this only affects
tests which use --batch-all-objects, but I'm about to add more).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Submodule ODBs are never added as alternates during the execution of the
test suite, but there may be a rare interaction that the test suite does
not have coverage of. Add a trace message when this happens, so that
users who trace their commands can notice such occurrences.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass the repo explicitly when calling check_has_commit() to avoid
relying on add_submodule_odb(). With this commit and the parent commit,
the last remaining tests no longer rely on add_submodule_odb(), so mark
these tests accordingly.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a35e03dee0 ("submodule: lazily add submodule ODBs as alternates",
2021-09-08), Git was taught to add all known submodule ODBs as
alternates when attempting to read an object that doesn't exist, as a
fallback for when a submodule object is read as if it were in
the_repository. However, this behavior wasn't restricted to happen only
when reading from the_repository. Fix this.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the parent commit and some of its ancestors, the only place
commits are being accessed through alternates is in the user-facing
message formatting code. Fix those, and remove the add_submodule_odb()
calls.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is currently no support for peeling the current ref of an iterator
iterating over a non-the_repository ref store, and none is needed. Thus,
for now, BUG() if that happens.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note that should_pack_ref() is called when writing refs, which is only
supported for the_repository, hence the_repository is hardcoded there.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for the next 2 patches that adds (partial) support for
arbitrary repositories to ref iterators, plumb a repository into all ref
stores. There are no changes to program logic.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git log" command limits its output to the commits that contain strings
matched by a pattern when the "--grep=<pattern>" option is used, but unlike
output from "git grep -e <pattern>", the matches are not highlighted,
making them harder to spot.
Teach the pretty-printer code to highlight matches from the
"--grep=<pattern>", "--author=<pattern>" and "--committer=<pattern>"
options (to view the last one, you may have to ask for --pretty=fuller).
Also, it must be noted that we are effectively greping the content twice
(because it would be a hassle to rework the existing matching code to do
a /g match and then pass it all down to the coloring code), however it only
slows down "git log --author=^H" on this repository by around 1-2%
(compared to v2.33.0), so it should be a small enough slow down to justify
the addition of the feature.
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the comparisons against OPT_SHORT and OPT_UNSET to an enum
which keeps track of how a given option got parsed. The case of "0"
was an implicit OPT_LONG, so let's add an explicit label for it.
Due to the xor in 0f1930c587 (parse-options: allow positivation of
options starting, with no-, 2012-02-25) the code already relied on
this being set back to 0. To avoid refactoring the logic involved in
that let's just start the enum at "0" instead of the usual "1<<0" (1),
but BUG() out if we don't have one of our expected flags.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were no tests for checking the specific output that we'll
generate in optname(), let's add some. That output was added back in
4a59fd1312 (Add a simple option parser., 2007-10-15).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change these two functions to "static", the last user of "optname()"
outside of parse-options.c itself went away in the preceding commit,
for the reasons noted in 9440b831ad (parse-options: replace
opterror() with optname(), 2018-11-10) we shouldn't be adding any more
users of it.
The "optbug()" function was never used outside of parse-options.c, but
was made non-static in 1f275b7c4c (parse-options: export opterr,
optbug, 2011-08-11). I think the only external user of optname() was
the commit-graph.c caller added in 09e0327f57 (builtin/commit-graph.c:
introduce '--max-new-filters=<n>', 2020-09-18).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop using optname() in builtin/commit-graph.c to emit an error with
the --max-new-filters option. This changes code added in 809e0327f5
(builtin/commit-graph.c: introduce '--max-new-filters=<n>',
2020-09-18).
See 9440b831ad (parse-options: replace opterror() with optname(),
2018-11-10) for why using optname() like this is considered bad,
i.e. it's assembling human-readable output piecemeal, and the "option
`X'" at the start can't be translated.
It didn't matter in this case, but this code was also buggy in its use
of "opt->flags" to optname(), that function expects flags, but not
*those* flags.
Let's pass "max-new-filters" to the new error because the option name
isn't translatable, and because we can re-use a translation added in
f7e68a0878 (parse-options: check empty value in OPT_INTEGER and
OPT_ABBREV, 2019-05-29).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for making "optname" a static function move it above
its first user in parse-options.c.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "flags" members of "struct option" to refer to their
corresponding "enum" defined earlier in the file.
The benefit of changing this to an enum isn't as great as with some
"enum parse_opt_type" as we'll always check this as a bitfield, so we
can't rely on the compiler checking "case" arms for us. But let's do
it for consistency with the rest of the file.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "default" case in parse_options() that handles the return
value of parse_options_step() to simply have a "case" arm for
PARSE_OPT_UNKNOWN, instead of leaving it to a comment. This means the
compiler can warn us about any missing case arms.
This adjusts code added in ff43ec3e2d (parse-opt: create
parse_options_step., 2008-06-23), given its age it may pre-date the
existence (or widespread use) of this coding style, which we've since
adopted more widely.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the "enum parse_opt_result" instead of an "int flags" as the
return value of the applicable functions in parse-options.c.
This will help catch future bugs, such as the missing "case" arms in
the two existing users of the API in "blame.c" and "shortlog.c". A
third caller in 309be813c9 (update-index: migrate to parse-options
API, 2010-12-01) was already checking for these.
As can be seen when trying to sort through the deluge of warnings
produced when compiling this with CC=g++ (mostly unrelated to this
change) we're not consistently using "enum parse_opt_result" even now,
i.e. we'll return error() and "return 0;". See f41179f16b
(parse-options: avoid magic return codes, 2019-01-27) for a commit
which started changing some of that.
I'm not doing any more of that exhaustive migration here, and it's
probably not worthwhile past the point of being able to check "enum
parse_opt_result" in switch().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the "enum parse_opt_flags" instead of an "int flags" as arguments
to the various functions in parse-options.c.
Even though this is an enum bitfield there's there's a benefit to
doing this when it comes to the wider C ecosystem. E.g. the GNU
debugger (gdb) will helpfully detect and print out meaningful enum
labels in this case. Here's the output before and after when breaking
in "parse_options()" after invoking "git stash show":
Before:
(gdb) p flags
$1 = 9
After:
(gdb) p flags
$1 = (PARSE_OPT_KEEP_DASHDASH | PARSE_OPT_KEEP_UNKNOWN)
Of course as noted in[1] there's a limit to this smartness,
i.e. manually setting it with unrelated enum labels won't be
caught. There are some third-party extensions to do more exhaustive
checking[2], perhaps we'll be able to make use of them sooner than
later.
We've also got prior art using this pattern in the codebase. See
e.g. "enum bloom_filter_computed" added in 312cff5207 (bloom: split
'get_bloom_filter()' in two, 2020-09-16) and the "permitted" enum
added in ce910287e7 (add -p: fix checking of user input, 2020-08-17).
1. https://lore.kernel.org/git/87mtnvvj3c.fsf@evledraar.gmail.com/
2. https://github.com/sinelaw/elfs-clang-plugins/blob/master/enums_conversion/README.md
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit cdc2d5f11f (builtin/blame: dim uninteresting metadata lines,
2018-04-23) and 25d5f52901 (builtin/blame: highlight recently changed
lines, 2018-04-23) introduce --color-lines and --color-by-age options to
git blame, respectively. While both options are mentioned in usage help,
they aren't documented in git-blame(1). Document them.
Co-authored-by: Dr. Matthias St. Pierre <m.st.pierre@ncp-e.com>
Signed-off-by: Dr. Matthias St. Pierre <m.st.pierre@ncp-e.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generally, word regex can be written such that they match tokens
liberally and need not model the actual syntax because it can be assumed
that the regex will only be applied to syntactically correct text.
The regex for cpp (C/C++) is too liberal, though. It regards these
sequences as single tokens:
1+2
1.5-e+2+f
and the following amalgams as one token:
.l as in str.length
.f as in str.find
.e as in str.erase
Tighten the regex in the following way:
- Accept + and - only in one position in the exponent. + and - are no
longer regarded as the sign of a number and are treated by the
catcher-all that is not visible in the driver's regex.
- Accept a leading decimal point only when it is followed by a digit.
For readability, factor hex- and binary numbers into an own term.
As a drive-by, this fixes that floating point numbers such as 12E5
(with upper-case E) were split into two tokens.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The word regex is too loose and matches long streaks of characters
that should actually be separate tokens. Add these problematic test
cases. Separate the lines with text that will remain identical in the
pre- and post-image so that the diff algorithm will not lump removals
and additions of consecutive lines together. This makes the expected
output easier to read.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
8d96e7288f (t4034: bulk verify builtin word regex sanity, 2010-12-18)
added many tests with the intent to verify that operators consisting of
more than one symbol are kept together. These are tested by probing a
transition from, e.g., a!=b to x!=y, which results in the word-diff
[-a-]{+x+}!=[-b-]{+y+}
But that proves only that the letters and operators are separate tokens.
To prove that != is an unseparable token, we have to probe a transition
from, e.g., a=b to a!=b having a word-diff
a[-=-]{+!=+}b
that proves that the ! is not separate from the =.
In the post-image, add to or remove from operators a character that
turns it into another valid operator.
Change the identifiers used around operators such that the diff
algorithm does not have an incentive to match, e.g., a<b in one spot
in the pre-image with a<b elsewhere in the post-image.
Adjust the expected output to match the new differences. Notice that
there are some undesirable tokenizations around e, ., and -. This will
be addressed in a later change.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use MINSTD to generate pseudo-random numbers consistently instead of
using rand(3), whose output can vary from system to system, and reset
its seed before filling in the test values. This gives repeatable
results across versions and systems, which simplifies sharing and
comparing of results between developers.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
6e773527b6 (sparse-index: convert from full to sparse, 2021-03-30) made
verify_path() accept trailing directory separators for directories,
which is necessary for sparse directory entries. This clemency causes
"git stash" to stumble over sub-repositories, though, and there may be
more unintended side-effects.
Avoid them by restoring the old verify_path() behavior and accepting
trailing directory separators only in places that are supposed to handle
sparse directory entries.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Turn verify_path() into an internal function that distinguishes between
valid paths and those with trailing directory separators and rename it
to verify_path_internal(). Provide a wrapper with the old behavior
under the old name. No functional change intended. The new function
will be used in the next patch.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash" used to ignore sub-repositories until 6e773527b6
(sparse-index: convert from full to sparse, 2021-03-30). Add a test
that demonstrates this regression.
Reported-by: Robert Leftwich <robert@gitpod.io>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We strbuf_reset() this "struct strbuf" in a loop earlier, but never
freed it. Plugs a memory leak that's been here ever since this code
got introduced in 1c7b76be7d (Build in merge, 2008-07-07).
This takes us from 68 failed tests in "t7600-merge.sh" to 59 under
SANITIZE=leak, and makes "t7604-merge-custom-message.sh" pass!
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak that's been here ever since 72aeb18772 (clean.c,
ls-files.c: respect encapsulation of exclude_list_groups, 2013-01-16),
we dup'd the argument in option_parse_exclude(), but never freed the
string_list.
This makes almost all of t3001-ls-files-others-exclude.sh pass (it had
a lot of failures before). Let's mark it as passing with
TEST_PASSES_SANITIZE_LEAK=true, and then exclude the tests that still
failed with a !SANITIZE_LEAK prerequisite check until we fix those
leaks. We can still see the failed tests under
GIT_TEST_FAIL_PREREQS=true.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix an edge case that was missed when the dir_clear() call was added
in eceba53214 (dir: fix problematic API to avoid memory leaks,
2020-08-18), we need to also clean up when we're about to exit with
non-zero.
That commit says, on the topic of the dir_clear() API and UNLEAK():
[...]two of them clearly thought about leaks since they had an
UNLEAK(dir) directive, which to me suggests that the method to
free the data was too unclear.
I think that 0e5bba53af (add UNLEAK annotation for reducing leak
false positives, 2017-09-08) which added the UNLEAK() makes it clear
that that wasn't the case, rather it was the desire to avoid the
complexity of freeing the memory at the end of the program.
This does add a bit of complexity, but I think it's worth it to just
fix these leaks when it's easy in built-ins. It allows them to serve
as canaries for underlying APIs that shouldn't be leaking, it
encourages us to make those freeing APIs nicer for all their users,
and it prevents other leaking regressions by being able to mark the
entire test as TEST_PASSES_SANITIZE_LEAK=true.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a trivial memory leak present ever since 38d905bf58 (sha1-array:
add test-sha1-array and basic tests, 2014-10-01), now that that's
fixed we can test this under GIT_TEST_PASSING_SANITIZE_LEAK=true.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in t/helper/test-oidtree.c, we were not freeing the
"struct strbuf" we used for the stdin input we parsed. This leak has
been here ever since 92d8ed8ac1 (oidtree: a crit-bit tree for
odb_loose_cache, 2021-07-07).
Now that it's fixed we can declare that t0069-oidtree.sh will pass
under GIT_TEST_PASSING_SANITIZE_LEAK=true.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in t/helper/test-parse-options.c, we were not
freeing the allocated "struct string_list" or its items. Let's move
the declaration of the "list" variable into the cmd__parse_options()
and release it at the end.
In c8ba163916 (parse-options: add OPT_STRING_LIST helper, 2011-06-09)
the "list" variable was added, and later on in
c8ba163916 (parse-options: add OPT_STRING_LIST helper, 2011-06-09)
the "expect" was added.
The "list" variable was last touched in 2721ce21e4 (use string_list
initializer consistently, 2016-06-13), but it was still left at the
static scope, it's better to move it to the function for consistency.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in t/helper/test-prio-queue.c, the lack of freeing
the memory with clear_prio_queue() has been there ever since this code
was originally added in b4b594a315 (prio-queue: priority queue of
pointers to structs, 2013-06-06).
By fixing this leak we can cleanly run t0009-prio-queue.sh under
SANITIZE=leak, so annotate it as such with
TEST_PASSES_SANITIZE_LEAK=true.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix two different but related memory leaks in
verify_clean_subdirectory(). We leaked both the "pathbuf" if
read_directory() returned non-zero, and we never cleaned up our own
"struct dir_struct" either.
* "pathbuf": When the read_directory() call followed by the
free(pathbuf) was added in c81935348b (Fix switching to a branch
with D/F when current branch has file D., 2007-03-15) we didn't
bother to free() before we called die().
But when this code was later libified in 203a2fe117 (Allow callers
of unpack_trees() to handle failure, 2008-02-07) we started to leak
as we returned data to the caller. This fixes that memory leak,
which can be observed under SANITIZE=leak with e.g. the
"t1001-read-tree-m-2way.sh" test.
* "struct dir_struct": We've leaked the dir_struct ever since this
code was added back in c81935348b.
When that commit was written there wasn't an equivalent of
dir_clear(). Since it was added in 270be81604 (dir.c: provide
clear_directory() for reclaiming dir_struct memory, 2013-01-06)
we've omitted freeing the memory allocated here.
This memory leak could also be observed under SANITIZE=leak and the
"t1001-read-tree-m-2way.sh" test.
This makes all the test in "t1001-read-tree-m-2way.sh" pass under
"GIT_TEST_PASSING_SANITIZE_LEAK=true", we'd previously die in tests
25, 26 & 28.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a sparse index it is possible for the tree that is being verified
to be freed while it is being verified. This happens when the index is
sparse but the cache tree is not and index_name_pos() looks up a path
from the cache tree that is a descendant of a sparse index entry. That
triggers a call to ensure_full_index() which frees the cache tree that
is being verified. Carrying on trying to verify the tree after this
results in a use-after-free bug. Instead restart the verification if a
sparse index is converted to a full index. This bug is triggered by a
call to reset_head() in "git rebase --apply". Thanks to René Scharfe
and Derrick Stolee for their help analyzing the problem.
==74345==ERROR: AddressSanitizer: heap-use-after-free on address 0x606000001b20 at pc 0x557cbe82d3a2 bp 0x7ffdfee08090 sp 0x7ffdfee08080
READ of size 4 at 0x606000001b20 thread T0
#0 0x557cbe82d3a1 in verify_one /home/phil/src/git/cache-tree.c:863
#1 0x557cbe82ca9d in verify_one /home/phil/src/git/cache-tree.c:840
#2 0x557cbe82ca9d in verify_one /home/phil/src/git/cache-tree.c:840
#3 0x557cbe82ca9d in verify_one /home/phil/src/git/cache-tree.c:840
#4 0x557cbe830a2b in cache_tree_verify /home/phil/src/git/cache-tree.c:910
#5 0x557cbea53741 in write_locked_index /home/phil/src/git/read-cache.c:3250
#6 0x557cbeab7fdd in reset_head /home/phil/src/git/reset.c:87
#7 0x557cbe72147f in cmd_rebase builtin/rebase.c:2074
#8 0x557cbe5bd151 in run_builtin /home/phil/src/git/git.c:461
#9 0x557cbe5bd151 in handle_builtin /home/phil/src/git/git.c:714
#10 0x557cbe5c0503 in run_argv /home/phil/src/git/git.c:781
#11 0x557cbe5c0503 in cmd_main /home/phil/src/git/git.c:912
#12 0x557cbe5bad28 in main /home/phil/src/git/common-main.c:52
#13 0x7fdd4b82eb24 in __libc_start_main (/usr/lib/libc.so.6+0x27b24)
#14 0x557cbe5bcb8d in _start (/home/phil/src/git/git+0x1b9b8d)
0x606000001b20 is located 0 bytes inside of 56-byte region [0x606000001b20,0x606000001b58)
freed by thread T0 here:
#0 0x7fdd4bacff19 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cpp:127
#1 0x557cbe82af60 in cache_tree_free /home/phil/src/git/cache-tree.c:35
#2 0x557cbe82aee5 in cache_tree_free /home/phil/src/git/cache-tree.c:31
#3 0x557cbe82aee5 in cache_tree_free /home/phil/src/git/cache-tree.c:31
#4 0x557cbe82aee5 in cache_tree_free /home/phil/src/git/cache-tree.c:31
#5 0x557cbeb2557a in ensure_full_index /home/phil/src/git/sparse-index.c:310
#6 0x557cbea45c4a in index_name_stage_pos /home/phil/src/git/read-cache.c:588
#7 0x557cbe82ce37 in verify_one /home/phil/src/git/cache-tree.c:850
#8 0x557cbe82ca9d in verify_one /home/phil/src/git/cache-tree.c:840
#9 0x557cbe82ca9d in verify_one /home/phil/src/git/cache-tree.c:840
#10 0x557cbe82ca9d in verify_one /home/phil/src/git/cache-tree.c:840
#11 0x557cbe830a2b in cache_tree_verify /home/phil/src/git/cache-tree.c:910
#12 0x557cbea53741 in write_locked_index /home/phil/src/git/read-cache.c:3250
#13 0x557cbeab7fdd in reset_head /home/phil/src/git/reset.c:87
#14 0x557cbe72147f in cmd_rebase builtin/rebase.c:2074
#15 0x557cbe5bd151 in run_builtin /home/phil/src/git/git.c:461
#16 0x557cbe5bd151 in handle_builtin /home/phil/src/git/git.c:714
#17 0x557cbe5c0503 in run_argv /home/phil/src/git/git.c:781
#18 0x557cbe5c0503 in cmd_main /home/phil/src/git/git.c:912
#19 0x557cbe5bad28 in main /home/phil/src/git/common-main.c:52
#20 0x7fdd4b82eb24 in __libc_start_main (/usr/lib/libc.so.6+0x27b24)
previously allocated by thread T0 here:
#0 0x7fdd4bad0459 in __interceptor_calloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x557cbebc1807 in xcalloc /home/phil/src/git/wrapper.c:140
#2 0x557cbe82b7d8 in cache_tree /home/phil/src/git/cache-tree.c:17
#3 0x557cbe82b7d8 in prime_cache_tree_rec /home/phil/src/git/cache-tree.c:763
#4 0x557cbe82b837 in prime_cache_tree_rec /home/phil/src/git/cache-tree.c:764
#5 0x557cbe82b837 in prime_cache_tree_rec /home/phil/src/git/cache-tree.c:764
#6 0x557cbe8304e1 in prime_cache_tree /home/phil/src/git/cache-tree.c:779
#7 0x557cbeab7fa7 in reset_head /home/phil/src/git/reset.c:85
#8 0x557cbe72147f in cmd_rebase builtin/rebase.c:2074
#9 0x557cbe5bd151 in run_builtin /home/phil/src/git/git.c:461
#10 0x557cbe5bd151 in handle_builtin /home/phil/src/git/git.c:714
#11 0x557cbe5c0503 in run_argv /home/phil/src/git/git.c:781
#12 0x557cbe5c0503 in cmd_main /home/phil/src/git/git.c:912
#13 0x557cbe5bad28 in main /home/phil/src/git/common-main.c:52
#14 0x7fdd4b82eb24 in __libc_start_main (/usr/lib/libc.so.6+0x27b24)
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In read_midx_preferred_pack(), we open the bitmap index but never free
it. This isn't a big deal since this is just a test helper, and we exit
immediately after, but since we're trying to keep our leak-checking tidy
now, it's worth fixing.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to re-read the edited todo list in "git rebase -i" was
made more robust.
* pw/rebase-reread-todo-after-editing:
rebase: fix todo-list rereading
sequencer.c: factor out a function
Code cleanup.
* ab/repo-settings-cleanup:
repository.h: don't use a mix of int and bitfields
repo-settings.c: simplify the setup
read-cache & fetch-negotiator: check "enum" values in switch()
environment.c: remove test-specific "ignore_untracked..." variable
wrapper.c: add x{un,}setenv(), and use xsetenv() in environment.c
Code clean-up in the "grep" machinery.
* jk/grep-haystack-is-read-only:
grep: store grep_source buffer as const
grep: mark "haystack" buffers as const
grep: stop modifying buffer in grep_source_1()
grep: stop modifying buffer in show_line()
grep: stop modifying buffer in strip_timestamp
Regression in "git commit-graph" command line parsing has been
corrected.
* tb/commit-graph-usage-fix:
builtin/multi-pack-index.c: disable top-level --[no-]progress
builtin/commit-graph.c: don't accept common --[no-]progress
"git rebase <upstream> <tag>" failed when aborted in the middle, as
it mistakenly tried to write the tag object instead of peeling it
to HEAD.
* pw/rebase-of-a-tag-fix:
rebase: dereference tags
rebase: use lookup_commit_reference_by_name()
rebase: use our standard error return value
t3407: rework rebase --quit tests
t3407: strengthen rebase --abort tests
t3407: use test_path_is_missing
t3407: rename a variable
t3407: use test_cmp_rev
t3407: use test_commit
t3407: run tests in $TEST_DIRECTORY
More code paths that use the hack to add submodule's object
database to the set of alternate object store have been cleaned up.
* jt/add-submodule-odb-clean-up:
revision: remove "submodule" from opt struct
repository: support unabsorbed in repo_submodule_init
submodule: remove unnecessary unabsorbed fallback
When EDITOR is invoked to modify a commit message, it will likely
change the terminal settings, and if it misbehaves will leave the
terminal output damaged as shown in a recent report from Windows
Terminal[1]
Instead use the functions provided by compat/terminal to save the
settings and recover safely.
[1] https://github.com/microsoft/terminal/issues/9359
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, git will share its console with all its children (unless
they create their own), and is therefore possible that any of them
that might change the settings for it could affect its operations once
completed.
Refactor the platform specific functionality to save the terminal
settings and expand it to also do so for the output handler.
This will allow for the state of the terminal to be saved and
restored around a child that might misbehave (ex vi) which will
be implemented next.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach test_perf_() to remove the temporary test_times.* files
at the end of each test.
test_perf_() runs a particular GIT_PERF_REPEAT_COUNT times and creates
./test_times.[123...]. It then uses a perl script to find the minimum
over "./test_times.*" (note the wildcard) and writes that time to
"test-results/<testname>.<testnumber>.result".
If the repeat count is changed during the pXXXX test script, stale
test_times.* files (from previous steps) may be included in the min()
computation. For example:
...
GIT_PERF_REPEAT_COUNT=3 \
test_perf "status" "
git status
"
GIT_PERF_REPEAT_COUNT=1 \
test_perf "checkout other" "
git checkout other
"
...
The time reported in the summary for "XXXX.2 checkout other" would
be "min( checkout[1], status[2], status[3] )".
We prevent that error by removing the test_times.* files at the end of
each test.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using `test_size` with `wc -c`, users on certain platforms can run
into issues when `wc` emits leading space characters in its output,
which confuses get_times.
Callers could switch to use test_file_size instead of `wc -c` (the
former never prints leading space characters, so will always work with
test_size regardless of platform), but this is an easy enough spot to
miss that we should teach get_times to be more tolerant of the input it
accepts.
Teach get_times to do just that by stripping any leading space
characters.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The man page documents that git-status can find copies, but does not
mention how. Whereas git-diff has command line options -C, there is
no such option for git-status - it will only detect copies when the
"status.renames" config option is "copies" or "copy". Document that
in git-status.txt because this has confused me and others[1].
[1]: https://www.reddit.com/r/git/comments/ppc2l9/how_to_get_a_file_with_copied_status/
Signed-off-by: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As reported in [1], T is missing from the description of porcelain
status letters in git-status(1) (whereas T *is* documented in
git-diff-files(1) and friends). Document T right after M (modified)
because the two are very similar.
[1] https://github.com/fish-shell/fish-shell/issues/8311
Signed-off-by: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Porcelain status letter T is documented as "type of the file", which
is technically correct but not enough information for users that are
not so familiar with this term from systems programming. In particular,
given that the only supported file types are "regular file", "symbolic
link" and "submodule", the term "file type" is surely opaque to the
many(?) users who are not aware that symbolic links can be tracked -
I thought that a "chmod +x" could cause the T status (wrong, it's M).
Explicitly document the three file types so users know if/how they
want to handle this.
Signed-off-by: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 176ea74793 ("wt-status.c: handle worktree renames", 2017-12-27)
made a porcelain status like .R or .C possible. They occur only when
the source file is added to the index and the destination file is
added with --intent-to-add.
They also documented DR, but that status is impossible. The index
change D means that the source file does not exist in the index.
The worktree change R/C states that the file has been renamed/copied
since the index, but that's impossible if it did not exist there.
Reported-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b3dfeebb92 (rebase: avoid computing unnecessary patch IDs, 2016-07-29)
added a perf test that calls tac(1) from GNU core utilities. Support
systems without it by reversing the generated list using sort -nr
instead. sort(1) with options -n and -r is already used in other tests.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Protocol v0 clients can get stuck parsing a malformed feature line.
* ah/connect-parse-feature-v0-fix:
connect: also update offset for features without values
"make clean" has been updated to remove leftover .depend/
directories, even when it is not told to use them to compute header
dependencies.
* ab/make-clean-depend-dirs:
Makefile: clean .depend dirs under COMPUTE_HEADER_DEPENDENCIES != yes
Sensitive data in the HTTP trace were supposed to be redacted, but
we failed to do so in HTTP/2 requests.
* jk/http-redact-fix:
http: match headers case-insensitively when redacting
Futz with the way 'errno' is relied on in the refs API to carry the
failure modes up the call chain.
* hn/refs-errno-cleanup:
refs: make errno output explicit for read_raw_ref_fn
refs/files-backend: stop setting errno from lock_ref_oid_basic
refs: remove EINVAL errno output from specification of read_raw_ref_fn
refs file backend: move raceproof_create_file() here
Continued work on top of the hn/refs-errno-cleanup topic.
* ab/refs-files-cleanup:
refs/files: remove unused "errno != ENOTDIR" condition
refs/files: remove unused "errno == EISDIR" code
refs/files: remove unused "oid" in lock_ref_oid_basic()
refs API: remove OID argument to reflog_expire()
reflog expire: don't lock reflogs using previously seen OID
refs/files: add a comment about refs_reflog_exists() call
refs: make repo_dwim_log() accept a NULL oid
refs/debug: re-indent argument list for "prepare"
refs/files: remove unused "skip" in lock_raw_ref() too
refs/files: remove unused "extras/skip" in lock_ref_oid_basic()
refs: drop unused "flags" parameter to lock_ref_oid_basic()
refs/files: remove unused REF_DELETING in lock_ref_oid_basic()
refs/packet: add missing BUG() invocations to reflog callbacks
"git cvsserver" had a long-standing bug in its authentication code,
which has finally been corrected (it is unclear and is a separate
question if anybody is seriously using it, though).
* cb/cvsserver:
Documentation: cleanup git-cvsserver
git-cvsserver: protect against NULL in crypt(3)
git-cvsserver: use crypt correctly to compare password hashes
"git clone" from a repository whose HEAD is unborn into a bare
repository didn't follow the branch name the other side used, which
is corrected.
* jk/clone-unborn-head-in-bare:
clone: handle unborn branch in bare repos
"git stash", where the tentative change involves changing a
directory to a file (or vice versa), was confused, which has been
corrected.
* en/stash-df-fix:
stash: restore untracked files AFTER restoring tracked files
stash: avoid feeding directories to update-index
t3903: document a pair of directory/file bugs
To prevent the race described in an earlier patch, generate and pass a
reference snapshot to the multi-pack bitmap code, if we are writing one
from `git repack`.
This patch is mostly limited to creating a temporary file, and then
calling for_each_ref(). Except we try to minimize duplicates, since
doing so can drastically reduce the size in network-of-forks style
repositories. In the kernel's fork network (the repository containing
all objects from the kernel and all its forks), deduplicating the
references drops the snapshot size from 934 MB to just 12 MB.
But since we're handling duplicates in this way, we have to make sure
that we preferred references (those listed in pack.preferBitmapTips)
before non-preferred ones (to avoid recording an object which is pointed
at by a preferred tip as non-preferred).
We accomplish this by doing separate passes over the references: first
visiting each prefix in pack.preferBitmapTips, and then over the rest of
the references.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing space between colon sentence (`bisect-run failed:`) and the
following sentence (`git bisect--helper --bisect-state`).
Fixes: d1bbbe45df (bisect--helper: reimplement `bisect_run` shell
function in C, 2021-09-13)
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While there is descriptions for porcelain and incremental output
formats, the default format isn't described. Describe that format for
the sake of completeness.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the error that's emitted in cases where we find a loose object
we parse, but which isn't at the location we expect it to be.
Before this change we'd prefix the error with a not-a-OID derived from
the path at which the object was found, due to an emergent behavior in
how we'd end up with an "OID" in these codepaths.
Now we'll instead say what object we hashed, and what path it was
found at. Before this patch series e.g.:
$ git hash-object --stdin -w -t blob </dev/null
e69de29bb2
$ mv objects/e6/ objects/e7
Would emit ("[...]" used to abbreviate the OIDs):
git fsck
error: hash mismatch for ./objects/e7/9d[...] (expected e79d[...])
error: e79d[...]: object corrupt or missing: ./objects/e7/9d[...]
Now we'll instead emit:
error: e69d[...]: hash-path mismatch, found at: ./objects/e7/9d[...]
Furthermore, we'll do the right thing when the object type and its
location are bad. I.e. this case:
$ git hash-object --stdin -w -t garbage --literally </dev/null
8315a83d2acc4c174aed59430f9a9c4ed926440f
$ mv objects/83 objects/84
As noted in an earlier commits we'd simply die early in those cases,
until preceding commits fixed the hard die on invalid object type:
$ git fsck
fatal: invalid object type
Now we'll instead emit sensible error messages:
$ git fsck
error: 8315[...]: hash-path mismatch, found at: ./objects/84/15[...]
error: 8315[...]: object is of unknown type 'garbage': ./objects/84/15[...]
In both fsck.c and object-file.c we're using null_oid as a sentinel
value for checking whether we got far enough to be certain that the
issue was indeed this OID mismatch.
We need to add the "object corrupt or missing" special-case to deal
with cases where read_loose_object() will return an error before
completing check_object_signature(), e.g. if we have an error in
unpack_loose_rest() because we find garbage after the valid gzip
content:
$ git hash-object --stdin -w -t blob </dev/null
e69de29bb2
$ chmod 755 objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391
$ echo garbage >>objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391
$ git fsck
error: garbage at end of loose object 'e69d[...]'
error: unable to unpack contents of ./objects/e6/9d[...]
error: e69d[...]: object corrupt or missing: ./objects/e6/9d[...]
There is currently some weird messaging in the edge case when the two
are combined, i.e. because we're not explicitly passing along an error
state about this specific scenario from check_stream_oid() via
read_loose_object() we'll end up printing the null OID if an object is
of an unknown type *and* it can't be unpacked by zlib, e.g.:
$ git hash-object --stdin -w -t garbage --literally </dev/null
8315a83d2acc4c174aed59430f9a9c4ed926440f
$ chmod 755 objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f
$ echo garbage >>objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f
$ /usr/bin/git fsck
fatal: invalid object type
$ ~/g/git/git fsck
error: garbage at end of loose object '8315a83d2acc4c174aed59430f9a9c4ed926440f'
error: unable to unpack contents of ./objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f
error: 8315a83d2acc4c174aed59430f9a9c4ed926440f: object corrupt or missing: ./objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f
error: 0000000000000000000000000000000000000000: object is of unknown type 'garbage': ./objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f
[...]
I think it's OK to leave that for future improvements, which would
involve enum-ifying more error state as we've done with "enum
unpack_loose_header_result" in preceding commits. In these
increasingly more obscure cases the worst that can happen is that
we'll get slightly nonsensical or inapplicable error messages.
There's other such potential edge cases, all of which might produce
some confusing messaging, but still be handled correctly as far as
passing along errors goes. E.g. if check_object_signature() returns
and oideq(real_oid, null_oid()) is true, which could happen if it
returns -1 due to the read_istream() call having failed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the error fsck emits on invalid object types, such as:
$ git hash-object --stdin -w -t garbage --literally </dev/null
<OID>
From the very ungraceful error of:
$ git fsck
fatal: invalid object type
$
To:
$ git fsck
error: <OID>: object is of unknown type 'garbage': <OID_PATH>
[ other fsck output ]
We'll still exit with non-zero, but now we'll finish the rest of the
traversal. The tests that's being added here asserts that we'll still
complain about other fsck issues (e.g. an unrelated dangling blob).
To do this we need to pass down the "OBJECT_INFO_ALLOW_UNKNOWN_TYPE"
flag from read_loose_object() through to parse_loose_header(). Since
the read_loose_object() function is only used in builtin/fsck.c we can
simply change it to accept a "struct object_info" (which contains the
OBJECT_INFO_ALLOW_UNKNOWN_TYPE in its flags). See
f6371f9210 (sha1_file: add read_loose_object() function, 2017-01-13)
for the introduction of read_loose_object().
Since we'll need a "struct strbuf" to hold the "type_name" let's pass
it to the for_each_loose_file_in_objdir() callback to avoid allocating
a new one for each loose object in the iteration. It also makes the
memory management simpler than sticking it in fsck_loose() itself, as
we'll only need to strbuf_reset() it, with no need to do a
strbuf_release() before each "return".
Before this commit we'd never check the "type" if read_loose_object()
failed, but now we do. We therefore need to initialize it to OBJ_NONE
to be able to tell the difference between e.g. its
unpack_loose_header() having failed, and us getting past that and into
parse_loose_header().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make parse_loose_header() return error codes and data instead of
invoking die() by itself.
For now we'll move the relevant die() call to loose_object_info() and
read_loose_object() to keep this change smaller. In a subsequent
commit we'll make read_loose_object() return an error code instead of
dying. We should also address the "allow_unknown" case (should be
moved to builtin/cat-file.c), but for now I'll be leaving it.
For making parse_loose_header() not die() change its prototype to
accept a "struct object_info *" instead of the "unsigned long *sizep"
it accepted before. Its callers can now check the populated populated
"oi->typep".
Because of this we don't need to pass in the "unsigned int flags"
which we used for OBJECT_INFO_ALLOW_UNKNOWN_TYPE, we can instead do
that check in loose_object_info().
This also refactors some confusing control flow around the "status"
variable. In some cases we set it to the return value of "error()",
i.e. -1, and later checked if "status < 0" was true.
Since 93cff9a978 (sha1_loose_object_info: return error for corrupted
objects, 2017-04-01) the return value of loose_object_info() (then
named sha1_loose_object_info()) had been a "status" variable that be
any negative value, as we were expecting to return the "enum
object_type".
The only negative type happens to be OBJ_BAD, but the code still
assumed that more might be added. This was then used later in
e.g. c84a1f3ed4 (sha1_file: refactor read_object, 2017-06-21). Now
that parse_loose_header() will return 0 on success instead of the
type (which it'll stick into the "struct object_info") we don't need
to conflate these two cases in its callers.
Since parse_loose_header() doesn't need to return an arbitrary
"status" we only need to treat its "ret < 0" specially, but can
idiomatically overwrite it with our own error() return. This along
with having made unpack_loose_header() return an "enum
unpack_loose_header_result" in an earlier commit means that we can
move the previously nested if/else cases mostly into the "ULHR_OK"
branch of the "switch" statement.
We should be less silent if we reach that "status = -1" branch, which
happens if we've got trailing garbage in loose objects, see
f6371f9210 (sha1_file: add read_loose_object() function, 2017-01-13)
for a better way to handle it. For now let's punt on it, a subsequent
commit will address that edge case.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the return code for "header too long" from the generic
negative return value unpack_loose_header() returns, and report via
error() if we exceed MAX_HEADER_LEN.
As a test added earlier in this series in t1006-cat-file.sh shows
we'll correctly emit zlib errors from zlib.c already in this case, so
we have no need to carry those return codes further down the
stack. Let's instead just return ULHR_TOO_LONG saying we ran into the
MAX_HEADER_LEN limit, or other negative values for "unable to unpack
<OID> header".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a preceding commit we changed and documented unpack_loose_header()
from its previous behavior of returning any negative value or zero, to
only -1 or 0.
Let's add an "enum unpack_loose_header_result" type and use it for
these return values, and have the compiler assert that we're
exhaustively covering all of them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Combine the unpack_loose_short_header(),
unpack_loose_header_to_strbuf() and unpack_loose_header() functions
into one.
The unpack_loose_header_to_strbuf() function was added in
46f034483e (sha1_file: support reading from a loose object of unknown
type, 2015-05-03).
Its code was mostly copy/pasted between it and both of
unpack_loose_header() and unpack_loose_short_header(). We now have a
single unpack_loose_header() function which accepts an optional
"struct strbuf *" instead.
I think the remaining unpack_loose_header() function could be further
simplified, we're carrying some complexity just to be able to emit a
garbage type longer than MAX_HEADER_LEN, we could alternatively just
say "we found a garbage type <first 32 bytes>..." instead. But let's
leave the current behavior in place for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the parse_loose_header_extended() function public and remove the
parse_loose_header() wrapper. The only direct user of it outside of
object-file.c itself was in streaming.c, that caller can simply pass
the required "struct object-info *" instead.
This change is being done in preparation for teaching
read_loose_object() to accept a flag to pass to
parse_loose_header(). It isn't strictly necessary for that change, we
could simply use parse_loose_header_extended() there, but will leave
the API in a better end state.
It would be a better end-state to have already moved the declaration
of these functions to object-store.h to avoid the forward declaration
of "struct object_info" in cache.h, but let's leave that cleanup for
some other time.
1. https://lore.kernel.org/git/patch-v6-09.22-5b9278e7bb4-20210907T104559Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Return a -1 when git_inflate() fails instead of whatever Z_* status
we'd get from zlib.c. This makes no difference to any error we report,
but makes it more obvious that we don't care about the specific zlib
error codes here.
See d21f842690 (unpack_sha1_header(): detect malformed object header,
2016-09-25) for the commit that added the "return status" code. As far
as I can tell there was never a real reason (e.g. different reporting)
for carrying down the "status" as opposed to "-1".
At the time that d21f842690 was written there was a corresponding
"ret < Z_OK" check right after the unpack_sha1_header() call (the
"unpack_sha1_header()" function was later rename to our current
"unpack_loose_header()").
However, that check was removed in c84a1f3ed4 (sha1_file: refactor
read_object, 2017-06-21) without changing the corresponding return
code.
So let's do the minor cleanup of also changing this function to return
a -1.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the loose_object_info() function returns an error stop faking up
the "oi->typep" to OBJ_BAD. Let the return value of the function
itself suffice. This code cleanup simplifies subsequent changes.
That we set this at all is a relic from the past. Before
052fe5eaca (sha1_loose_object_info: make type lookup optional,
2013-07-12) we would always return the type_from_string(type) via the
parse_sha1_header() function, or -1 (i.e. OBJ_BAD) if we couldn't
parse it.
Then in a combination of 46f034483e (sha1_file: support reading from
a loose object of unknown type, 2015-05-03) and
b3ea7dd32d (sha1_loose_object_info: handle errors from
unpack_sha1_rest, 2017-10-05) our API drifted even further towards
conflating the two again.
Having read the code paths involved carefully I think this is OK. We
are just about to return -1, and we have only one caller:
do_oid_object_info_extended(). That function will in turn go on to
return -1 when we return -1 here.
This might be introducing a subtle bug where a caller of
oid_object_info_extended() would inspect its "typep" and expect a
meaningful value if the function returned -1.
Such a problem would not occur for its simpler oid_object_info()
sister function. That one always returns the "enum object_type", which
in the case of -1 would be the OBJ_BAD.
Having read the code for all the callers of these functions I don't
believe any such bug is being introduced here, and in any case we'd
likely already have such a bug for the "sizep" member (although
blindly checking "typep" first would be a more common case).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a blindspot in the tests for "cat-file" (and by proxy, the guts of
object-file.c) by testing that when we can't decode a loose object
with zlib we'll emit an error from zlib.c.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we look up a missing object with cat_one_file() what error we
print out currently depends on whether we'll error out early in
get_oid_with_context(), or if we'll get an error later from
oid_object_info_extended().
The --allow-unknown-type flag then changes whether we pass the
"OBJECT_INFO_ALLOW_UNKNOWN_TYPE" flag to get_oid_with_context() or
not.
The "-p" flag is yet another special-case in printing the same output
on the deadbeef OID as we'd emit on the deadbeef_short OID for the
"-s" and "-t" options, it also doesn't support the
"--allow-unknown-type" flag at all.
Let's test the combination of the two sets of [-t, -s, -p] and
[--{no-}allow-unknown-type] (the --no-allow-unknown-type is implicit
in not supplying it), as well as a [missing,bogus] object pair.
This extends tests added in 3e370f9faf (t1006: add tests for git
cat-file --allow-unknown-type, 2015-05-03).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the short/long bogus bogus object type variables into a form
where the two sets can be used concurrently. This'll be used by
subsequently added tests.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There wasn't any output tests for this scenario, let's ensure that we
don't regress on it in the changes that come after this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If fsck we move an object around between .git/objects/?? directories
to simulate a hash mismatch "git fsck" will currently hard die() in
object-file.c. This behavior will be fixed in subsequent commits, but
let's test for it as-is for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor one of the fsck tests to use a throwaway repository. It's a
pervasive pattern in t1450-fsck.sh to spend a lot of effort on the
teardown of a tests so we're not leaving corrupt content for the next
test.
We can instead use the pattern of creating a named sub-repository,
then we don't have to worry about cleaning up after ourselves, nobody
will care what state the broken "hash-mismatch" repository is after
this test runs.
See [1] for related discussion on various "modern" test patterns that
can be used to avoid verbosity and increase reliability.
1. https://lore.kernel.org/git/87y27veeyj.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a blindspot in the fsck tests by checking what we do when we
encounter an unknown "garbage" type produced with hash-object's
--literally option.
This behavior needs to be improved, which'll be done in subsequent
patches, but for now let's test for the current behavior.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function was removed in ad0fb65999 (repo-settings: parse
core.untrackedCache, 2019-08-13), but not its corresponding *.h entry.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The init_log_tree_opt() and log_tree_opt_parse() functions were
removed in cd2bdc5309 (Common option parsing for "git log --diff" and
friends, 2006-04-14), but not their corresponding *.h declaration.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function was removed in 0579f91dd7 (grep: enable threading with
-p and -W using lazy attribute lookup, 2011-12-12), but not its
corresponding *.h declaration.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The cmd_tar_tree() function itself was removed in
925ceccf05 (tar-tree: remove deprecated command, 2013-11-10).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commit we introduced REF_STATES_INIT, but did not
change the "struct show_info" to have a corresponding
initializer. Let's do that, and make it use "REF_STATES_INIT" and
"STRING_LIST_INIT_DUP", doing that requires changing "list" and
"states" away from being pointers.
The resulting end-state is simpler since we omit the local "info_list"
and "states" variables in show() as well as the memset().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a new REF_STATES_INIT designated initializer instead of assigning
to the "strdup_strings" member of the previously memzero()'d version
of this struct.
The pattern of assigning to "strdup_strings" dates back to
211c89682e (Make git-remote a builtin, 2008-02-29) (when it was
"strdup_paths"), i.e. long before we used anything like our current
established *_INIT patterns consistently.
Then in e61e0cc6b7 (builtin-remote: teach show to display remote
HEAD, 2009-02-25) and e5dcbfd9ab (builtin-remote: new show output
style for push refspecs, 2009-02-25) we added some more of these.
As it turns out we only initialized this struct three times, all the
other uses were of pointers to those initialized structs. So let's
initialize it in those three places, skip the memset(), and pass those
structs down appropriately.
This would be a behavior change if we had codepaths that relied say on
implicitly having had "new_refs" initialized to STRING_LIST_INIT_NODUP
with the memset(), but only set the "strdup_strings" on some other
struct, but then called string_list_append() on "new_refs". There
isn't any such codepath, all of the late assignments to
"strdup_strings" assigned to those structs that we'd use for those
codepaths.
So just initializing them all up-front makes for easier to understand
code, i.e. in the pre-image it looked as though we had that tricky
edge case, but we didn't.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the initialization pattern of "struct urlmatch_config" to use
an *_INIT macro and designated initializers. Right now there's no
other "struct" member of "struct urlmatch_config" which would require
its own *_INIT, but it's good practice not to assume that. Let's also
change this to a designated initializer while we're at it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bottom-up mergesort implementation needs to skip through sublists a
lot. A recursive version could avoid that, but would require log2(n)
stack frames. Explicitly manage a stack of sorted sublists of various
lengths instead to avoid fast-forwarding while also keeping a lid on
memory usage.
While this patch was developed independently, a ranks stack is also used
in https://github.com/mono/mono/blob/master/mono/eglib/sort.frag.h by
the Mono project.
The idea is to keep slots for log2(n_max) sorted sublists, one for each
power of 2. Such a construct can accommodate lists of any length up to
n_max. Since there is a known maximum number of items (effectively
SIZE_MAX), we can preallocate the whole rank stack.
We add items one by one, which is akin to incrementing a binary number.
Make use of that by keeping track of the number of items and check bits
in it instead of checking for NULL in the rank stack when checking if a
sublist of a certain rank exists, in order to avoid memory accesses.
The first item can go into the empty first slot as a sublist of length
2^0. The second one needs to be merged with the previous sublist and
the result goes into the empty second slot as a sublist of length 2^1.
The third one goes into vacated first slot and so on. At the end we
merge all the sublists to get the result.
The new version still performs a stable sort by making sure to put items
seen earlier first when the compare function indicates equality. That's
done by preferring items from sublists with a higher rank.
The new merge function also tries to minimize the number of operations.
Like blame.c::blame_merge(), the function doesn't set the next pointer
if it already points to the right item, and it exits when it reaches the
end of one of the two sublists that it's given. The old code couldn't
do the latter because it kept all items in a single list.
The number of comparisons stays the same, though. Here's example output
of "test-tool mergesort test" for the rand distributions with the most
number of comparisons with the ranks stack:
$ t/helper/test-tool mergesort test | awk '
NR > 1 && $1 != "rand" {next}
$7 > max[$3] {max[$3] = $7; line[$3] = $0}
END {for (n in line) print line[n]}
'
distribut mode n m get_next set_next compare verdict
rand copy 100 32 669 420 569 OK
rand dither 1023 64 9997 5396 8974 OK
rand dither 1024 512 10007 6159 8983 OK
rand dither 1025 256 10993 5988 9968 OK
Here are the differences to the results without this patch:
distribut mode n m get_next set_next compare
rand copy 100 32 -515 -280 0
rand dither 1023 64 -6376 -4834 0
rand dither 1024 512 -6377 -4081 0
rand dither 1025 256 -7461 -5287 0
The numbers of get_next and set_next calls are reduced significantly.
NB: These winners are different than the ones shown in the patch that
introduced the unriffle mode because the addition of the unriffle_skewed
mode in between changed the consumption of rand() values.
Here are the distributions with the most comparisons overall with the
ranks stack:
$ t/helper/test-tool mergesort test | awk '
$7 > max[$3] {max[$3] = $7; line[$3] = $0}
END {for (n in line) print line[n]}
'
distribut mode n m get_next set_next compare verdict
sawtooth unriffle_skewed 100 128 689 632 589 OK
sawtooth unriffle_skewed 1023 1024 10230 10220 9207 OK
sawtooth unriffle 1024 1024 10241 10240 9217 OK
sawtooth unriffle_skewed 1025 2048 11266 10242 10241 OK
And here the differences to before:
distribut mode n m get_next set_next compare
sawtooth unriffle_skewed 100 128 -495 -68 0
sawtooth unriffle_skewed 1023 1024 -6143 -10 0
sawtooth unriffle 1024 1024 -6143 0 0
sawtooth unriffle_skewed 1025 2048 -7188 -1033 0
We get a similar reduction of get_next calls here, but only a slight
reduction of set_next calls, if at all.
And here are the results of p0071-sort.sh before:
0071.12: llist_mergesort() unsorted 0.36(0.33+0.01)
0071.14: llist_mergesort() sorted 0.15(0.13+0.01)
0071.16: llist_mergesort() reversed 0.16(0.14+0.01)
... and here the ones with this patch:
0071.12: llist_mergesort() unsorted 0.24(0.22+0.01)
0071.14: llist_mergesort() sorted 0.12(0.10+0.01)
0071.16: llist_mergesort() reversed 0.12(0.10+0.01)
NB: We can't use t/perf/run to compare revisions in one run because it
uses the test-tool from the worktree, not from the revisions being
tested.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if sorting takes advantage of already sorted or reversed content,
or if that corner case actually decreases performance, like it would for
a simplistic quicksort implementation.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a mode that turns a sorted list into adversarial input for a
bottom-up mergesort implementation that doubles the length of sorted
sublists at each level -- like our llist_mergesort().
While unriffle mode splits the list in half at each recursion step,
unriffle_skewed splits it into 2^l items and the rest, with 2^l being
the highest power of two smaller than the number of items and thus
2^l >= rest. The rest is unriffled with the tail of the first half to
require a merge to compare the maximum number of elements.
It complements the unriffle mode, which targets balanced merges. If
the number of elements is a power of two then both actually produce the
same result, as 2^l == rest == n/2 at each recursion step in that case.
Here are the results:
$ t/helper/test-tool mergesort test | awk '
$7 > max[$3] {max[$3] = $7; line[$3] = $0}
END {for (n in line) print line[n]}
'
distribut mode n m get_next set_next compare verdict
sawtooth unriffle_skewed 100 128 1184 700 589 OK
sawtooth unriffle_skewed 1023 1024 16373 10230 9207 OK
sawtooth unriffle 1024 1024 16384 10240 9217 OK
sawtooth unriffle_skewed 1025 2048 18454 11275 10241 OK
The sawtooth distribution with m>=n produces a sorted list and
unriffle_skewed mode turns it into adversarial input for unbalanced
merges, which it wins in all cases except for n=1024 -- the resulting
list is the same, but unriffle is tested before unriffle_skewed, so its
result is selected by the AWK script.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a mode that turns sorted items into adversarial input for mergesort.
Do that by running mergesort in reverse and rearranging the items in
such a way that each merge needs the maximum number of operations to
undo it.
To riffle is a card shuffling technique and involves splitting a deck
into two and then to interleave them. A perfect riffle takes one card
from each half in turn. That's similar to the most expensive merge,
which has to take one item from each sublist in turn, which requires the
maximum number of comparisons (n-1).
So unriffle does that in reverse, i.e. it generates the first sublist
out of the items at even indexes and the second sublist out of the items
at odd indexes, without changing their order in any other way. Done
recursively until we reach the trivial sublist length of one, this
twists the list into an order that requires the maximum effort for
mergesort to untangle.
As a baseline, here are the rand distributions with the highest number
of comparisons from "test-tool mergesort test":
$ t/helper/test-tool mergesort test | awk '
NR > 1 && $1 != "rand" {next}
$7 > max[$3] {max[$3] = $7; line[$3] = $0}
END {for (n in line) print line[n]}
'
distribut mode n m get_next set_next compare verdict
rand copy 100 32 1184 700 569 OK
rand reverse_1st_half 1023 256 16373 10230 8976 OK
rand reverse_1st_half 1024 512 16384 10240 8993 OK
rand dither 1025 64 18454 11275 9970 OK
And here are the most expensive ones overall:
$ t/helper/test-tool mergesort test | awk '
$7 > max[$3] {max[$3] = $7; line[$3] = $0}
END {for (n in line) print line[n]}
'
distribut mode n m get_next set_next compare verdict
stagger reverse 100 64 1184 700 580 OK
sawtooth unriffle 1023 1024 16373 10230 9179 OK
sawtooth unriffle 1024 1024 16384 10240 9217 OK
stagger unriffle 1025 2048 18454 11275 10241 OK
The sawtooth distribution with m>=n generates a sorted list. The
unriffle mode is designed to turn that into adversarial input for
mergesort, and that checks out for n=1023 and n=1024, where it produces
the list that requires the most comparisons.
Item counts that are not powers of two have other winners, and that's
because unriffle recursively splits lists into equal-sized halves, while
llist_mergesort() splits them into the biggest power of two smaller than
n and the rest, e.g. for n=1025 it sorts the first 1024 separately and
finally merges them to the last item.
So unriffle mode works as designed for the intended use case, but to
consistently generate adversarial input for unbalanced merges we need
something else.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a subcommand for printing test data. It can be used to generate
special test cases and feed them into the sort subcommand or sort(1) for
performance measurements. It may also be useful to illustrate the
effect of distributions, modes and their parameters.
It generates n integers with the specified distribution and its
distribution-specific parameter m. E.g. m is the maximum value for
the plateau distribution and the length and height of individual teeth
of the sawtooth distribution.
The generated values are printed as zero-padded eight-digit hexadecimal
numbers to make sure alphabetic and numeric order are the same.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adapt the qsort certification program from "Engineering a Sort Function"
by Bentley and McIlroy for testing our linked list sort function. It
generates several lists with various distribution patterns and counts
the number of operations llist_mergesort() needs to order them. It
compares the result to the output of a trusted sort function (qsort(1))
and also checks if the sort is stable.
Also add a test script that makes use of the new subcommand.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give the code for sorting a text file its own sub-command. This allows
extending the helper, which we'll do in the following patches.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Strip line ending characters to make sure empty lines are sorted like
sort(1) does.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `buf` strbuf is reused again later in the same function, so there
is no benefit to calling strbuf_release(). The subsequent usage is
already using strbuf_reset() to reset the buffer, so releasing it
early is only going to lead to a wasteful reallocation.
Remove the early call to strbuf_release(). The same strbuf is already
cleaned up in the "finish:" section so nothing is leaked, either.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a helpers function to handle the unlinking and writing
of the dir-diff submodule and symlink stand-in files.
Use the helpers to implement the guts of the hashmap loops.
This eliminate duplicate code and safeguards the submodules
hashmap loop against the symlink-chasing behavior that 5bafb3576a
(difftool: fix symlink-file writing in dir-diff mode, 2021-09-22)
addressed.
The submodules loop should not strictly require the unlink() call that
this is introducing to them, but it does not necessarily hurt them
either beyond the cost of the extra unlink().
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The paths generated by difftool are passed to user-facing diff tools.
Using paths with repeated slashes in them is a cosmetic blemish that
is exposed to users and can be avoided.
Use a strbuf to create the buffer used for the dir-diff tmpdir.
Strip trailing slashes from the value read from TMPDIR to avoid
repeated slashes in the generated paths.
Adjust the error handling to avoid leaking strbufs and to avoid
returning -1 to cmd_main().
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These changes are made in preparation of, the colorization support for the
"git log" subcommands that, rely on regex functionality (i.e. "--author",
"--committer" and "--grep"). These changes are necessary primarily because
match_one_pattern() expects header lines to be prefixed, however, in
pretty, the prefixes are stripped from the lines because the name-email
pairs need to go through additional parsing, before they can be printed and
because next_match() doesn't handle the case of
"ctx == GREP_CONTEXT_HEAD" at all. So, teach next_match() how to handle the
new case and move match_one_pattern()'s core logic to
headerless_match_one_pattern() while preserving match_one_pattern()'s uses
that depend on the additional processing.
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some circumstances, "git grep --textconv --recurse-submodules"
ignores the textconv attributes from the submodules and erroneously
applies the attributes defined in the superproject on the submodules'
files. The textconv cache is also saved on the superproject, even for
submodule objects.
A fix for these problems will probably require at least three changes:
- Some textconv and attributes functions (as well as their callees) will
have to be adjusted to work with arbitrary repositories. Note that
"fill_textconv()", for example, already receives a "struct repository"
but it writes the textconv cache using "write_loose_object()", which
implicitly works on "the_repository".
- grep.c functions will have to call textconv/userdiff routines passing
the "repo" field from "struct grep_source" instead of the one from
"struct grep_opt". The latter always points to "the_repository" on
"git grep" executions (see its initialization in builtin/grep.c), but
the former points to the correct repository that each source (an
object, file, or buffer) comes from.
- "userdiff_find_by_path()" might need to use a different attributes
stack for each repository it works on or reset its internal static
stack when the repository is changed throughout the calls.
For now, let's add some tests to demonstrate these problems, and also
update a NEEDSWORK comment in grep.h that mentions this bug to reference
the added tests.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When repacking into a geometric series and writing a multi-pack bitmap,
it is beneficial to have the largest resulting pack be the preferred
object source in the bitmap's MIDX, since selecting the large packs can
lead to fewer broken delta chains and better compression.
Teach 'git repack' to identify this pack and pass it to the MIDX write
machinery in order to mark it as preferred.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach `git repack` a new `--write-midx` option for callers that wish to
persist a multi-pack index in their repository while repacking.
There are two existing alternatives to this new flag, but they don't
cover our particular use-case. These alternatives are:
- Call 'git multi-pack-index write' after running 'git repack', or
- Set 'GIT_TEST_MULTI_PACK_INDEX=1' in your environment when running
'git repack'.
The former works, but introduces a gap in bitmap coverage between
repacking and writing a new MIDX (since the repack may have deleted a
pack included in the existing MIDX, invalidating it altogether).
Setting the 'GIT_TEST_' environment variable is obviously unsupported.
In fact, even if it were supported officially, it still wouldn't work,
because it generates the MIDX *after* redundant packs have been dropped,
leading to the same issue as above.
Introduce a new option which eliminates this race by teaching `git
repack` to generate the MIDX at the critical point: after the new packs
have been written and moved into place, but before the redundant packs
have been removed.
This option is compatible with `git repack`'s '--bitmap' option (it
changes the interpretation to be: "write a bitmap corresponding to the
MIDX after one has been generated").
There is a little bit of additional noise in the patch below to avoid
repeating ourselves when selecting which packs to delete. Instead of a
single loop as before (where we iterate over 'existing_packs', decide if
a pack is worth deleting, and if so, delete it), we have two loops (the
first where we decide which ones are worth deleting, and the second
where we actually do the deleting). This makes it so we have a single
check we can make consistently when (1) telling the MIDX which packs we
want to exclude, and (2) actually unlinking the redundant packs.
There is also a tiny change to short-circuit the body of
write_midx_included_packs() when no packs remain in the case of an empty
repository. The MIDX code does not handle this, so avoid trying to
generate a MIDX covering zero packs in the first place.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only ask whether stderr is a tty before calling
'prune_packed_objects()', but the subsequent patch will add another use.
Extract this check into a variable so that both can use it without
having to call 'isatty()' twice.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new variable `existing_kept_packs` (and corresponding parameter
`fname_kept_list`) added by the previous patch make it seem like
`existing_packs` and `fname_list` are each subsets of the other two
respectively.
In reality, each pair is disjoint: one stores the packs without .keep
files, and the other stores the packs with .keep files. Rename each to
more clearly reflect this.
Suggested-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to be able to write a multi-pack index during repacking, `git
repack` must keep track of which packs it wants to write into the MIDX.
This set is the union of existing packs which will not be deleted,
new pack(s) generated as a result of the repack, and .keep packs.
Prior to this patch, `git repack` populated the list of existing packs
only when repacking all-into-one (i.e., with `-A` or `-a`), but we will
soon need to know this list when repacking when writing a MIDX without
a-i-o.
Populate the list of existing packs unconditionally, and guard removing
packs from that list only when repacking a-i-o.
Additionally, keep track of filenames of kept packs separately, since
this, too, will be used in an upcoming patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To power a new `--write-midx` mode, `git repack` will want to write a
multi-pack index containing a certain set of packs in the repository.
This new option will be used by `git repack` to write a MIDX which
contains only the packs which will survive after the repack (that is, it
will exclude any packs which are about to be deleted).
This patch effectively exposes the function implemented in the previous
commit via the `git multi-pack-index` builtin. An alternative approach
would have been to call that function from the `git repack` builtin
directly, but this introduces awkward problems around closing and
reopening the object store, so the MIDX will be written out-of-process.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose a variant of the write_midx_file() function which ignores packs
that aren't included in an explicit "allow" list.
This will be used in an upcoming patch to power a new `--stdin-packs`
mode of `git multi-pack-index write` for callers that only want to
include certain packs in a MIDX (and ignore any packs which may have
happened to enter the repository independently, e.g., from pushes).
Those patches will provide test coverage for this new function.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
6a8cbc41ba (developer: enable pedantic by default, 2021-09-03)
enables pedantic mode in as many compilers as possible to help gather
feedback on future tightening, so lets do so.
-Wpedantic is missing in some really old gcc 4 versions so lets restrict
it to gcc5 and clang4 (it does work in clang3 AFAIK, but it will be
unlikely that a developer will use such an old compiler anyway).
MinGW gcc is the only one which has -Wno-pedantic-ms-format, and while
that is available also in older compilers, the Windows SDK provides gcc10
so lets aim for that.
Note that in order to target the flag to only Windows, additional changes
were needed in config.mak.uname to propagate the OS detection which also
did some minor refactoring, but which is functionaly equivalent.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bad landmine of a bug which has been with us ever since
PARSE_OPT_SHELL_EVAL was added in 47e9cd28f8 (parseopt: wrap
rev-parse --parseopt usage for eval consumption, 2010-06-12).
It's an argument to parse_options() and should therefore be in "enum
parse_opt_flags", but it was added to the per-option "enum
parse_opt_option_flags" by mistake.
Therefore as soon as we'd have an enum member in the former that
reached its value of "1 << 8" we'd run into a seemingly bizarre bug
where that new option would turn on the unrelated PARSE_OPT_SHELL_EVAL
in "git rev-parse --parseopt" by proxy.
I manually checked that no other enum members suffered from such
overlap, by setting the values to non-overlapping values, and making
the relevant codepaths BUG() out if the given value was above/below
the expected (excluding flags=0 in the case of "enum
parse_opt_flags").
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The summary line had xy, while the description (and other sub-sections)
has XY.
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/ref-paranoia: (71 commits)
refs: drop "broken" flag from for_each_fullref_in()
ref-filter: drop broken-ref code entirely
ref-filter: stop setting FILTER_REFS_INCLUDE_BROKEN
repack, prune: drop GIT_REF_PARANOIA settings
refs: turn on GIT_REF_PARANOIA by default
refs: omit dangling symrefs when using GIT_REF_PARANOIA
refs: add DO_FOR_EACH_OMIT_DANGLING_SYMREFS flag
refs-internal.h: reorganize DO_FOR_EACH_* flag documentation
refs-internal.h: move DO_FOR_EACH_* flags next to each other
t5312: be more assertive about command failure
t5312: test non-destructive repack
t5312: create bogus ref as necessary
t5312: drop "verbose" helper
t5600: provide detached HEAD for corruption failures
t5516: don't use HEAD ref for invalid ref-deletion tests
t7900: clean up some more broken refs
The eighth batch
t0000: avoid masking git exit value through pipes
tree-diff: fix leak when not HAVE_ALLOCA_H
pack-revindex.h: correct the time complexity descriptions
...
Remove the now-unused "incomplete" parameter from create_dir_entry(),
all its callers specify it as "1", so let's drop the "incomplete=0"
case. The last caller to use it was search_for_subdir(), but that code
was removed in the preceding commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the "mkdir" parameter from the find_containing_dir() function,
the add_ref_entry() function removed in the preceding commit was its
last user.
Since "mkdir" is always "0" we can also remove the parameter from
search_for_subdir(), which in turn means that we can delete most of
that function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function has not been used since 9dd389f3d8 (packed_ref_store:
get rid of the `ref_cache` entirely, 2017-09-25).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function was missed in 9939b33d6a (packed-backend: rip out some
now-unused code, 2017-09-08), and has been orphaned since then. Let's
delete it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function was added in 3dce444f17 (refs: add a backend method
structure, 2016-09-04), but has never been used by anything. The only
caller that might care uses find_ref_storage_backend() directly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git_config_key_is_valid() function got left behind in a
refactoring in a9bcf6586d (alias: use the early config machinery to
expand aliases, 2017-06-14),
It previously had two users when it was added in 9e9de18f1a (config:
silence warnings for command names with invalid keys, 2015-08-24), and
after 6a1e1bc0a1 (pager: use callbacks instead of configset,
2016-09-12) only one remained.
By removing it we can get rid of the "quiet" branches in this
function, as well as cases where "store_key" is NULL, for which there
are no other users.
Out of the 5 callers of git_config_parse_key() only one needs to pass
a non-NULL "size_t *baselen_", so we could remove the third parameter
from the public interface. I did not find that potential
simplification to be worthwhile.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove this function left over to accommodate in-flight changes, see
770fedaf9f (string-list.[ch]: add a string_list_init_{nodup,dup}(),
2021-07-01) for the recent change to add
"string_list_init_{nodup,dup}()" initializers.
There was only one user of the API left in remote-curl.c. I don't know
why I didn't include this change to remote-curl.c in
bc40dfb10a (string-list.h users: change to use *_{nodup,dup}(),
2021-07-01), perhaps I just missed it.
In any case, let's change that one user to use the new API, as of
writing this there are no in-flight changes that use, so this seems
like a good time to drop this before we get any new users of this
compatibility API.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanup to limit memory consumption and tighten protocol
message parsing.
* jk/reduce-malloc-in-v2-servers:
ls-refs: reject unknown arguments
serve: reject commands used as capabilities
serve: reject bogus v2 "command=ls-refs=foo"
docs/protocol-v2: clarify some ls-refs ref-prefix details
ls-refs: ignore very long ref-prefix counts
serve: drop "keys" strvec
serve: provide "receive" function for session-id capability
serve: provide "receive" function for object-format capability
serve: add "receive" method for v2 capabilities table
serve: return capability "value" from get_capability()
serve: rename is_command() to parse_command()
The previous changes modified the behavior of 'git add', 'git rm', and
'git mv' to not adjust paths outside the sparse-checkout cone, even if
they exist in the working tree and their cache entries lack the
SKIP_WORKTREE bit. The intention is to warn users that they are doing
something potentially dangerous. The '--sparse' option was added to each
command to allow careful users the same ability they had before.
To improve the discoverability of this new functionality, add a message
to advice.updateSparsePath that mentions the existence of the option.
The previous set of changes also modified the purpose of this message to
include possibly a list of paths instead of only a list of pathspecs.
Make the warning message more clear about this new behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since cmd_mv() does not operate on cache entries and instead directly
checks the filesystem, we can only use path_in_sparse_checkout() as a
mechanism for seeing if a path is sparse or not. Be sure to skip
returning a failure if '-k' is specified.
To ensure that the advice around sparse paths is the only reason a move
failed, be sure to check this as the very last thing before inserting
into the src_for_dst list.
The tests cover a variety of cases such as whether the target is tracked
or untracked, and whether the source or destination are in or outside of
the sparse-checkout definition.
Helped-by: Matheus Tavares Bernardino <matheus.bernardino@usp.br>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a path does not match the sparse-checkout cone but is somehow missing
the SKIP_WORKTREE bit, then 'git rm' currently succeeds in removing the
file. One reason a user might be in this situation is a merge conflict
outside of the sparse-checkout cone. Removing such a file might be
problematic for users who are not sure what they are doing.
Add a check to path_in_sparse_checkout() when 'git rm' is checking if a
path should be considered for deletion. Of course, this check is ignored
if the '--sparse' option is specified, allowing users who accept the
risks to continue with the removal.
This also removes a confusing behavior where a user asks for a directory
to be removed, but only the entries that are within the sparse-checkout
definition are removed. Now, 'git rm <dir>' will fail without '--sparse'
and will succeed in removing all contained paths with '--sparse'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we did previously in 'git add', add a '--sparse' option to 'git rm'
that allows modifying paths outside of the sparse-checkout definition.
The existing checks in 'git rm' are restricted to tracked files that
have the SKIP_WORKTREE bit in the current index. Future changes will
cause 'git rm' to reject removing paths outside of the sparse-checkout
definition, even if they are untracked or do not have the SKIP_WORKTREE
bit.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We added checks for path_in_sparse_checkout() to portions of 'git add'
that add warnings and prevent stagins a modification, but we skipped the
--renormalize mode. Update renormalize_tracked_files() to ignore cache
entries whose path is outside of the sparse-checkout cone (unless
--sparse is provided). Add a test in t3705.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We added checks for path_in_sparse_checkout() to portions of 'git add'
that add warnings and prevent staging a modification, but we skipped the
--chmod mode. Update chmod_pathspec() to ignore cache entries whose path
is outside of the sparse-checkout cone (unless --sparse is provided).
Add a test in t3705.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We previously modified 'git add' to refuse updating index entries
outside of the sparse-checkout cone. This is justified to prevent users
from accidentally getting into a confusing state when Git removes those
files from the working tree at some later point.
Unfortunately, this caused some workflows that were previously possible
to become impossible, especially around merge conflicts outside of the
sparse-checkout cone. These were documented in tests within t1092.
We now re-enable these workflows using a new '--sparse' option to 'git
add'. This allows users to signal "Yes, I do know what I'm doing with
these files," and accept the consequences of the files leaving the
worktree later.
We delay updating the advice message until implementing a similar option
in 'git rm' and 'git mv'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git add' adds a tracked file that is outside of the
sparse-checkout cone, it checks the SKIP_WORKTREE bit to see if the file
exists outside of the sparse-checkout cone. This is usually correct,
except in the case of a merge conflict outside of the cone.
Modify add_pathspec_matched_against_index() to be more careful about
paths by checking the sparse-checkout patterns in addition to the
SKIP_WORKTREE bit. This causes 'git add' to no longer allow files
outside of the cone that removed the SKIP_WORKTREE bit due to a merge
conflict.
With only this change, users will only be able to add the file after
adding the file to the sparse-checkout cone. A later change will allow
users to force adding even though the file is outside of the
sparse-checkout cone.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The add_files() method in builtin/add.c takes a set of untracked files
that are being added by the input pathspec and inserts them into the
index. If these files are outside of the sparse-checkout cone, then they
gain the SKIP_WORKTREE bit at some point. However, this was not checked
before inserting into the index, so these files are added even though we
want to avoid modifying the index outside of the sparse-checkout cone.
Add a check within add_files() for these files and write the advice
about files outside of the sparse-checkout cone.
This behavior change modifies some existing tests within t1092. These
tests intended to document how a user could interact with the existing
behavior in place. Many of these tests need to be marked as expecting
failure. A future change will allow these tests to pass by adding a flag
to 'git add' that allows users to modify index entries outside of the
sparse-checkout cone.
The 'submodule handling' test is intended to document what happens to
directories that contain a submodule when the sparse index is enabled.
It is not trying to say that users should be able to add submodules
outside of the sparse-checkout cone, so that test can be modified to
avoid that operation.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Within match_pathname(), one successful matching category happens when
the pattern is equal to its non-wildcard prefix. At this point, we have
checked that the input 'pathname' matches the pattern up to the prefix
length, and then we subtraced that length from both 'patternlen' and
'namelen'.
In the case of a directory match, this prefix match should be
sufficient. However, the success condition only cared about _exact_
equality here. Instead, we should allow any path that agrees on this
prefix in the case of PATTERN_FLAG_MUSTBEDIR.
This case was not tested before because of the way unpack_trees() would
match a parent directory before visiting the contained paths. This
approach is changing, so we must change this comparison.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When matching a path against a list of patterns, the ones that require a
directory match previously did not work when a filename is specified.
This was fine when all pattern-matching was done within methods such as
unpack_trees() that check a directory before recursing into the
contained files. However, other commands will start matching individual
files against pattern lists without that recursive approach.
The last_matching_pattern_from_list() logic performs some checks on the
filetype of a path within the index when the PATTERN_FLAG_MUSTBEDIR flag
is set. This works great when setting SKIP_WORKTREE bits within
unpack_trees(), but doesn't work well when passing an arbitrary path
such as a file within a matching directory.
We extract the logic around determining the file type, but attempt to
avoid checking the filesystem if the parent directory already matches
the sparse-checkout patterns. The new path_matches_dir_pattern() method
includes a 'path_parent' parameter that is used to store the parent
directory of 'pathname' between multiple pattern matching tests. This is
loaded lazily, only on the first pattern it finds that has the
PATTERN_FLAG_MUSTBEDIR flag.
If we find that a path has a parent directory, we start by checking to
see if that parent directory matches the pattern. If so, then we do not
need to query the index for the type (which can be expensive). If we
find that the parent does not match, then we still must check the type
from the index for the given pathname.
Note that this does not affect cone mode pattern matching, but instead
the more general -- and slower -- full pattern set. Thus, this does not
affect the sparse index.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some tests to demonstrate the current behavior around adding files
outside of the sparse-checkout cone. Currently, untracked files are
handled differently from tracked files. A future change will make these
cases be handled the same way.
Further expand checking that a failed 'git add' does not stage changes
to the index.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b681b191 introduced the support of systemd timers for git
maintenance.
A test is leveraging the `systemd-analyze verify` utility to verify the
correctness of the systemd unit files generated by git.
But on some systems, although the `systemd-analyze` tool is installed
and supports the `verify` subcommand, it fails with some permission
errors.
So, instead of only checking if the `verify` subcommand exists, a more
reliable way of detecting whether `systemd-analyze verify` can be used
is to try to use it.
The SYSTEMD_ANALYZE prerequisite is now trying to run `systemd-analyze
verify` on a systemd unit file which is shipped by systemd itself.
We can reasonably think that, on systemd hosts, this file is present and
valid.
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the commit_info_init() function addded in ea02ffa385 (mailmap:
simplify map_user() interface, 2013-01-05) and instead initialize the
"struct commit_info" with a macro.
This is the more idiomatic pattern in the codebase, and doesn't leave
us wondering when we see the *_init() function if this struct needs
more complex initialization than a macro can provide.
The get_commit_info() function is only called by the three callers
being changed here immediately after initializing the struct with the
macros, so by moving the initialization to the callers we don't need
to do it in get_commit_info() anymore.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the hostinfo_init() function added in 01cec54e13 (daemon:
deglobalize hostname information, 2015-03-07) and instead initialize
the "struct hostinfo" with a macro.
This is the more idiomatic pattern in the codebase, and doesn't leave
us wondering when we see the *_init() function if this struct needs
more complex initialization than a macro can provide.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the same pattern for cb_init() as the one established in the
recent refactoring of other such patterns in
5726a6b401 (*.c *_init(): define in terms of corresponding *_INIT
macro, 2021-07-01).
It has been pointed out[1] that we could perhaps use this C99
replacement of using a compound literal for all of these:
*t = (struct cb_tree){ 0 };
But let's just stick to the existing pattern established in
5726a6b401 for now, we can leave another weather balloon for some
other time.
1. http://lore.kernel.org/git/ef724a3a-a4b8-65d3-c928-13a7d78f189a@gmail.com
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move various *_INIT macros to use designated initializers. This helps
readability. I've only picked those leftover macros that were not
touched by another in-flight series of mine which changed others, but
also how initialization was done.
In the case of SUBMODULE_ALTERNATE_SETUP_INIT I've left an explicit
initialization of "error_mode", even though
SUBMODULE_ALTERNATE_ERROR_IGNORE itself is defined as "0". Let's not
peek under the hood and assume that enum fields we know the value of
will stay at "0".
The change to "TESTSUITE_INIT" in "t/helper/test-run-command.c" was
part of an earlier on-list version[1] of c90be786da (test-tool
run-command: fix flip-flop init pattern, 2021-09-11).
1. https://lore.kernel.org/git/patch-1.1-0aa4523ab6e-20210909T130849Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the initialization of "struct strbuf" changed in
cbc0f81d96 (strbuf: use designated initializers in STRBUF_INIT,
2017-07-10) to omit specifying "alloc" and "len", as we do with other
"alloc" and "len" (or "nr") in similar structs.
Let's likewise omit the explicit initialization of all fields in the
"struct ipc_client_connect_option" struct added in
59c7b88198 (simple-ipc: add win32 implementation, 2021-03-15).
Do the same for a few other initializers, e.g. STRVEC_INIT and
CACHE_DEF_INIT.
Finally, start incrementally changing the same pattern in
"t/helper/test-run-command.c". This change was part of an earlier
on-list version[1] of c90be786da (test-tool run-command: fix
flip-flop init pattern, 2021-09-11).
1. https://lore.kernel.org/git/patch-1.1-0aa4523ab6e-20210909T130849Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In C it isn't required to specify that all members of a struct are
zero'd out to 0, NULL or '\0', just providing a "{ 0 }" will
accomplish that.
Let's also change code that provided N zero'd fields to just
provide one, and change e.g. "{ NULL }" to "{ 0 }" for
consistency. I.e. even if the first member is a pointer let's use "0"
instead of "NULL". The point of using "0" consistently is to pick one,
and to not have the reader wonder why we're not using the same pattern
everywhere.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This macro was added and used in c68f837576 (implement fetching of
moved submodules, 2017-10-16) but its last user went away in
be76c21282 (fetch: ensure submodule objects fetched, 2018-12-06).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The same bug fixed in the "COMPUTE_HEADER_DEPENDENCIES=auto" mode in
the preceding commit was also present with
"GENERATE_COMPILATION_DATABASE=yes". Let's fix it so it works again
with "DEVOPTS=1".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some commands have traditionally also removed untracked files (or
directories) that were in the way of a tracked file we needed. Document
these cases.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the last few commits we focused on code in unpack-trees.c that
mistakenly removed untracked files or directories. There may be more of
those, but in this commit we change our focus: callers of toplevel
commands that are expected to remove untracked files or directories.
As noted previously, we have toplevel commands that are expected to
delete untracked files such as 'read-tree --reset', 'reset --hard', and
'checkout --force'. However, that does not mean that other highlevel
commands that happen to call these other commands thought about or
conveyed to users the possibility that untracked files could be removed.
Audit the code for such callsites, and add comments near existing
callsites to mention whether these are safe or not.
My auditing is somewhat incomplete, though; it skipped several cases:
* git-rebase--preserve-merges.sh: is in the process of being
deprecated/removed, so I won't leave a note that there are
likely more bugs in that script.
* contrib/git-new-workdir: why is the -f flag being used in a new
empty directory?? It shouldn't hurt, but it seems useless.
* git-p4.py: Don't see why -f is needed for a new dir (maybe it's
not and is just superfluous), but I'm not at all familiar with
the p4 stuff
* git-archimport.perl: Don't care; arch is long since dead
* git-cvs*.perl: Don't care; cvs is long since dead
Also, the reset --hard in builtin/worktree.c looks safe, due to only
running in an empty directory.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, unpack_trees_options->reset was used to signal that it
was okay to delete any untracked files in the way. This was used by
`git read-tree --reset`, but then started appearing in other places as
well. However, many of the other uses should not be deleting untracked
files in the way. Change this value to an enum so that a value of 1
(i.e. "true") can be split into two:
UNPACK_RESET_PROTECT_UNTRACKED,
UNPACK_RESET_OVERWRITE_UNTRACKED
In order to catch accidental misuses (i.e. where folks call it the way
they traditionally used to), define the special enum value of
UNPACK_RESET_INVALID = 1
which will trigger a BUG().
Modify existing callers so that
read-tree --reset
reset --hard
checkout --force
continue using the UNPACK_RESET_OVERWRITE_UNTRACKED logic, while other
callers, including
am
checkout without --force
stash (though currently dead code; reset always had a value of 0)
numerous callers from rebase/sequencer to reset_head()
will use the new UNPACK_RESET_PROTECT_UNTRACKED value.
Also, note that it has been reported that 'git checkout <treeish>
<pathspec>' currently also allows overwriting untracked files[1]. That
case should also be fixed, but it does not use unpack_trees() and thus
is outside the scope of the current changes.
[1] https://lore.kernel.org/git/15dad590-087e-5a48-9238-5d2826950506@gmail.com/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change several commands to remove ignored files by default when they are
in the way. Since some commands (checkout, merge) take a
--no-overwrite-ignore option to allow the user to configure this, and it
may make sense to add that option to more commands (and in the case of
merge, actually plumb that configuration option through to more of the
backends than just the fast-forwarding special case), add little
comments about where such flags would be used.
Incidentally, this fixes a test failure in t7112.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid accidental misuse or confusion over ownership by clearly making
unpack_trees_options.dir an internal-only variable.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, every caller of unpack_trees() that wants to ensure ignored
files are overwritten by default needs to:
* allocate unpack_trees_options.dir
* flip the DIR_SHOW_IGNORED flag in unpack_trees_options.dir->flags
* call setup_standard_excludes
AND then after the call to unpack_trees() needs to
* call dir_clear()
* deallocate unpack_trees_options.dir
That's a fair amount of boilerplate, and every caller uses identical
code. Make this easier by instead introducing a new boolean value where
the default value (0) does what we want so that new callers of
unpack_trees() automatically get the appropriate behavior. And move all
the handling of unpack_trees_options.dir into unpack_trees() itself.
While preserve_ignored = 0 is the behavior we feel is the appropriate
default, we defer fixing commands to use the appropriate default until a
later commit. So, this commit introduces several locations where we
manually set preserve_ignored=1. This makes it clear where code paths
were previously preserving ignored files when they should not have been;
a future commit will flip these to instead use a value of 0 to get the
behavior we want.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a long-standing patchwork of ignored files handling in
read-tree and merge-recursive, called out and suggested by Junio long
ago. Quoting from commit dcf0c16ef1 ("core.excludesfile clean-up"
2007-11-16):
git-read-tree takes --exclude-per-directory=<gitignore>,
not because the flexibility was needed. Again, this was
because the option predates the standardization of the ignore
files.
...
On the other hand, I think it makes perfect sense to fix
git-read-tree, git-merge-recursive and git-clean to follow the
same rule as other commands. I do not think of a valid use case
to give an exclude-per-directory that is nonstandard to
read-tree command, outside a "negative" test in the t1004 test
script.
This patch is the first step to untangle this mess.
The next step would be to teach read-tree, merge-recursive and
clean (in C) to use setup_standard_excludes().
History shows each of these were partially or fully fixed:
* clean was taught the new trick in 1617adc7a0 ("Teach git clean to
use setup_standard_excludes()", 2007-11-14).
* read-tree was primarily used by checkout & merge scripts. checkout
and merge later became builtins and were both fixed to use the new
setup_standard_excludes() handling in fc001b526c ("checkout,merge:
loosen overwriting untracked file check based on info/exclude",
2011-11-27). So the primary users were fixed, though read-tree
itself was not.
* merge-recursive has now been replaced as the default merge backend
by merge-ort. merge-ort fixed this by using
setup_standard_excludes() starting early in its implementation; see
commit 6681ce5cf6 ("merge-ort: add implementation of checkout()",
2020-12-13), largely due to its design depending on checkout() and
thus being influenced by the checkout code. However,
merge-recursive itself was not fixed here, in part because its
design meant it had difficulty differentiating between untracked
files, ignored files, leftover tracked files that haven't been
removed yet due to order of processing files, and files written by
itself due to collisions).
Make the conversion more complete by now handling read-tree and
handling at least the unpack_trees() portion of merge-recursive. While
merge-recursive is on its way out, fixing the unpack_trees() portion is
easy and facilitates some of the later changes in this series. Note
that fixing read-tree makes the --exclude-per-directory option to
read-tree useless, so we remove it from the documentation (though we
continue to accept it if passed).
The read-tree changes happen to fix a bug in t1013.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gcc will helpfully raise a -Wcast-function-type warning when casting
between functions that might have incompatible return types
(ex: GetUserNameExW returns bool which is only half the size of the
return type from FARPROC which is long long), so create a new type that
could be used as a completely generic function pointer and cast through
it instead.
Additionaly remove the -Wno-incompatible-pointer-types temporary
flag added in 27e0c3c (win32: allow building with pedantic mode
enabled, 2021-09-03), as it will be no longer needed.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No callers pass in anything but "0" here. Likewise to our sibling
functions. Note that some of them ferry along the flag, but none of
their callers pass anything but "0" either.
Nor is anybody likely to change that. Callers which really want to see
all of the raw refs use for_each_rawref(). And anybody interested in
iterating a subset of the refs will likely be happy to use the
now-default behavior of showing broken refs, but omitting dangling
symlinks.
So we can get rid of this whole feature.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that none of our callers passes the INCLUDE_BROKEN flag, we can drop
it entirely, along with the code to plumb it through to the
for_each_fullref_in() functions.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Of the ref-filter callers, for-each-ref and git-branch both set the
INCLUDE_BROKEN flag (but git-tag does not, which is a weird
inconsistency). But now that GIT_REF_PARANOIA is on by default, that
produces almost the same outcome for all three.
The one exception is that GIT_REF_PARANOIA will omit dangling symrefs.
That's a better behavior for these tools, as they would never include
such a symref in the main output anyway (they can't, as it doesn't point
to an object). Instead they issue a warning to stderr. But that warning
is somewhat useless; a dangling symref is a perfectly reasonable thing
to have in your repository, and is not a sign of corruption. It's much
friendlier to just quietly ignore it.
And in terms of robustness, the warning gains us little. It does not
impact the exit code of either tool. So while the warning _might_ clue
in a user that they have an unexpected broken symref, it would not help
any kind of scripted use.
This patch converts for-each-ref and git-branch to stop using the
INCLUDE_BROKEN flag. That gives them more reasonable behavior, and
harmonizes them with git-tag.
We have to change one test to adapt to the situation. t1430 tries to
trigger all of the REF_ISBROKEN behaviors from the underlying ref code.
It uses for-each-ref to do so (because there isn't any other mechanism).
That will no longer issue a warning about the symref which points to an
invalid name, as it's considered dangling (and we can instead be sure
that it's _not_ mentioned on stderr). Note that we do still complain
about the illegally named "broken..symref"; its problem is not that it's
dangling, but the name of the symref itself is illegal.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that GIT_REF_PARANOIA is the default, we don't need to selectively
enable it for destructive operations. In fact, it's harmful to do so,
because it overrides any GIT_REF_PARANOIA=0 setting that the user may
have provided (because they're trying to work around some corruption).
With these uses gone, we can further clean up the ref_paranoia global,
and make it a static variable inside the refs code.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original point of the GIT_REF_PARANOIA flag was to include broken
refs in iterations, so that possibly-destructive operations would not
silently ignore them (and would generally instead try to operate on the
oids and fail when the objects could not be accessed).
We already turned this on by default for some dangerous operations, like
"repack -ad" (where missing a reachability tip would mean dropping the
associated history). But it was not on for general use, even though it
could easily result in the spreading of corruption (e.g., imagine
cloning a repository which simply omits some of its refs because
their objects are missing; the result quietly succeeds even though you
did not clone everything!).
This patch turns on GIT_REF_PARANOIA by default. So a clone as mentioned
above would actually fail (upload-pack tells us about the broken ref,
and when we ask for the objects, pack-objects fails to deliver them).
This may be inconvenient when working with a corrupted repository, but:
- we are better off to err on the side of complaining about
corruption, and then provide mechanisms for explicitly loosening
safety.
- this is only one type of corruption anyway. If we are missing any
other objects in the history that _aren't_ ref tips, then we'd
behave similarly (happily show the ref, but then barf when we
started traversing).
We retain the GIT_REF_PARANOIA variable, but simply default it to "1"
instead of "0". That gives the user an escape hatch for loosening this
when working with a corrupt repository. It won't work across a remote
connection to upload-pack (because we can't necessarily set environment
variables on the remote), but there the client has other options (e.g.,
choosing which refs to fetch).
As a bonus, this also makes ref iteration faster in general (because we
don't have to call has_object_file() for each ref), though probably not
noticeably so in the general case. In a repo with a million refs, it
shaved a few hundred milliseconds off of upload-pack's advertisement;
that's noticeable, but most repos are not nearly that large.
The possible downside here is that any operation which iterates refs but
doesn't ever open their objects may now quietly claim to have X when the
object is corrupted (e.g., "git rev-list new-branch --not --all" will
treat a broken ref as uninteresting). But again, that's not really any
different than corruption below the ref level. We might have
refs/heads/old-branch as non-corrupt, but we are not actively checking
that we have the entire reachable history. Or the pointed-to object
could even be corrupted on-disk (but our "do we have it" check would
still succeed). In that sense, this is merely bringing ref-corruption in
line with general object corruption.
One alternative implementation would be to actually check for broken
refs, and then _immediately die_ if we see any. That would cause the
"rev-list --not --all" case above to abort immediately. But in many ways
that's the worst of all worlds:
- it still spends time looking up the objects an extra time
- it still doesn't catch corruption below the ref level
- it's even more inconvenient; with the current implementation of
GIT_REF_PARANOIA for something like upload-pack, we can make
the advertisement and let the client choose a non-broken piece of
history. If we bail as soon as we see a broken ref, they cannot even
see the advertisement.
The test changes here show some of the fallout. A non-destructive "git
repack -adk" now fails by default (but we can override it). Deleting a
broken ref now actually tells the hooks the correct "before" state,
rather than a confusing null oid.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dangling symrefs aren't actually a corruption problem. It's perfectly
fine for refs/remotes/origin/HEAD to point to an unborn branch. And in
particular, if you are trying to establish reachability, a symref that
points nowhere doesn't matter either way. Any ref it could point to will
be examined during the rest of the traversal.
It's possible that a symref pointing nowhere _could_ be a sign that the
ref it was meant to point to was deleted accidentally (e.g., via
corruption). But there is no particular reason to think that is true for
any given case, and in the meantime, GIT_REF_PARANOIA kicking in
automatically for some operations means they'll fail unnecessarily.
So let's loosen it just a bit. The new test in t5312 shows off an
example that is safe, but currently fails (and no longer does after this
patch).
Note that we don't do anything if the caller explicitly asked for
DO_FOR_EACH_INCLUDE_BROKEN. In that case they may be looking for
dangling symrefs themselves, and setting GIT_REF_PARANOIA should not
_loosen_ things from what the caller asked for.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the DO_FOR_EACH_INCLUDE_BROKEN flag is used, we include both actual
corrupt refs (illegal names, missing objects), but also symrefs that
point to nothing. This latter is not really a corruption, but just
something that may happen normally. For example, the symref at
refs/remotes/origin/HEAD may point to a tracking branch which is later
deleted. (The local HEAD may also be unborn, of course, but we do not
access it through ref iteration).
Most callers of for_each_ref() etc, do not care. They don't pass
INCLUDE_BROKEN, so don't see it at all. But for those which do pass it,
this somewhat-normal state causes extra warnings (e.g., from
for-each-ref) or even aborts operations (destructive repacks with
GIT_REF_PARANOIA set).
This patch just introduces the flag and the mechanism; there are no
callers yet (and hence no tests). Two things to note on the
implementation:
- we actually skip any symref that does not resolve to a ref. This
includes ones which point to an invalidly-named ref. You could argue
this is a more serious breakage than simple dangling. But the
overall effect is the same (we could not follow the symref), as well
as the impact on things like REF_PARANOIA (either way, a symref we
can't follow won't impact reachability, because we'll see the ref
itself during iteration). The underlying resolution function doesn't
distinguish these two cases (they both get REF_ISBROKEN).
- we change the iterator in refs/files-backend.c where we check
INCLUDE_BROKEN. There's a matching spot in refs/packed-backend.c,
but we don't know need to do anything there. The packed backend does
not support symrefs at all.
The resulting set of flags might be a bit easier to follow if we broke
this down into "INCLUDE_CORRUPT_REFS" and "INCLUDE_DANGLING_SYMREFS".
But there are a few reasons not do so:
- adding a new OMIT_DANGLING_SYMREFS flag lets us leave existing
callers intact, without changing their behavior (and some of them
really do want to see the dangling symrefs; e.g., t5505 has a test
which expects us to report when a symref becomes dangling)
- they're not actually independent. You cannot say "include dangling
symrefs" without also including refs whose objects are not
reachable, because dangling symrefs by definition do not have an
object. We could tweak the implementation to distinguish this, but
in practice nobody wants to ask for that. Adding the OMIT flag keeps
the implementation simple and makes sure we don't regress the
current behavior.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for the DO_FOR_EACH_* flags is sprinkled over the
refs-internal.h file. We define the two flags in one spot, and then
describe them in more detail far away from there, in the definitions of
refs_ref_iterator_begin() and ref_iterator_advance_fn().
Let's try to organize this a bit better:
- convert the #defines to an enum. This makes it clear that they are
related, and that the enum shows the complete set of flags.
- combine all descriptions for each flag in a single spot, next to the
flag's definition
- use the enum rather than a bare int for functions which take the
flags. This helps readers realize which flags can be used.
- clarify the mention of flags for ref_iterator_advance_fn(). It does
not take flags itself, but is meant to depend on ones set up
earlier.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are currently two DO_FOR_EACH_* flags, which must not have their
bits overlap. Yet they're defined hundreds of lines apart. Let's move
them next to each other to make it clear that they are related and are a
complete set (which matters if you are adding a new flag and would like
to know what the next available bit is).
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When repacking or pruning in a corrupted repository, our tests in t5312
argue that it is OK to complete the operation or bail, as long as we
don't actually delete the objects pointed to by the corruption.
This isn't a wrong line of reasoning, but the tests are a bit permissive
by using test_might_fail. The fact is that we _do_ bail currently, and
if we ever stopped doing so, that would be worthy of a human
investigating. So let's switch these to test_must_fail.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t5312, we create a state with a broken ref, and then make sure that
destructive repacks don't silently ignore the breakage (where a
destructive repack is one that might drop objects). But we don't check
the behavior of non-destructive repacks at all (i.e., ones where we'd
keep unreachable objects).
So let's add a test to confirm the current behavior, which is that
they are allowed (i.e., ignoring the breakage and considering any
objects it points to as unreachable). This may change in the future, but
we'd like for the test suite to alert us to that fact.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests in t5312 create an illegally-named ref, and then see how
various operations handle it. But between those operations, we also do
some more setup (e.g., repacking), and we are subtly depending on how
those setup steps react to the illegal ref.
To future-proof us against those behaviors changing, let's instead
create and clean up our bogus ref on demand in the tests that need it.
This has two small extra advantages:
- the tests are more stand-alone; we do not need an extra test to clean
up the ref before moving on to other parts of the script
- the creation and cleanup is together in one helper function. Because
these depend on touching the refs in the filesystem directly, they
may need to be tweaked for a world with alternate backends (they have
not been noticed so far in the reftable work because with a non-file
backend the tests don't fail; they simply become uninteresting noops
because the broken ref isn't read at all).
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5312 has several uses of the "verbose" helper, as described in
8ad1652418 (t5304: use helper to report failure of "test foo = bar",
2014-10-10). Back then the "-x" trace option for tests was new, and was
not as pleasant to use (e.g., some tests failed under "-x", we did not
support BASH_XTRACEFD, etc).
These days it is clear that "-x" is the preferred way to get extra
output, and we don't need to mark up individual tests. Let's get rid of
the uses of "verbose" here, as one step toward eradicating it totally.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checking how git-clone behaves when it fails, we stimulate some
failures by trying to do a clone from a local repository whose objects
have been removed. Because these clones use local optimizations, there's
a subtle dependency in how the corruption is handled on the sending
side.
If upload-pack does not show us the broken refs (which it does not
currently), then we see only HEAD (which is itself broken), and clone
that as a detached HEAD. When we try to write the ref, we notice that we
never got the object and bail.
But if upload-pack _does_ show us the broken refs (which it may in a
future patch), then we'll realize that HEAD is a symref and just write
that. You'd think we'd fail when writing out the refs themselves, but we
don't; we do a bulk write and skip the connectivity check because of our
--local optimizations. For the non-bare case, we do notice the problem
when we try to checkout. But for a bare repository, we unexpectedly
complete the clone successfully!
At first glance this may seem like a bug. But the whole point of those
local optimizations is to give up some safety for speed. If you want to
be careful, you should be using "--no-local", which would notice that
the pack did not transfer sufficient objects. We could do that in these
tests, but part of the point is for them to fail at specific moments
(and indeed, we have a later test that checks for transport failure).
However, we can make this less subtle and future-proof it against
changes on the upload-pack side by just having an explicit detached
HEAD in the corrupted repo. Now we'll fail as expected during the ref
write if any ref _or_ HEAD is corrupt, whether we're --bare or not.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few tests in t5516 want to assert that we can delete a corrupted ref
whose pointed-to object is missing. They do so by using the "main"
branch, which is also pointed to by HEAD.
This does work, but only because of a subtle assumption about the
implementation. We do not block the deletion because of the invalid ref,
but we _also_ do not notice that the deleted branch is pointed to by
HEAD. And so the safety rule of "do not allow HEAD to be deleted in a
non-bare repository" does not kick in, and the test passes.
Let's instead use a non-HEAD branch. That still tests what we care about
here (deleting a corrupt ref), but without implicitly depending on our
failure to notice that we're deleting HEAD. That will future proof the
test against that behavior changing.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "incremental-repack task" test replaces the object directory with a
known state. As a result, some of our refs point to objects that are not
included in that state.
Commit 3cf5f221be (t7900: clean up some broken refs, 2021-01-19) cleaned
up some of those (that were causing warnings to stderr from the
maintenance process). But there are a few more that were missed. These
aren't hurting anything for now, but it's certainly an unexpected state
to leave the test repository in, and it will become a problem if repack
ever gets more picky about broken refs.
Let's clean up those additional refs (which are all in refs/remotes,
with nothing there that isn't broken), and add an extra "for-each-ref"
call to assert that we've got everything.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the error shown when a http.pinnedPubKey doesn't match to point
the http.pinnedPubKey variable added in aeff8a6121 (http: implement
public key pinning, 2016-02-15), e.g.:
git -c http.pinnedPubKey=sha256/someNonMatchingKey ls-remote https://github.com/git/git.git
fatal: unable to access 'https://github.com/git/git.git/' with http.pinnedPubkey configuration: SSL: public key does not match pinned public key!
Before this we'd emit the exact same thing without the " with
http.pinnedPubkey configuration". The advantage of doing this is that
we're going to get a translated message (everything after the ":" is
hardcoded in English in libcurl), and we've got a reference to the
git-specific configuration variable that's causing the error.
Unfortunately we can't test this easily, as there are no tests that
require https:// in the test suite, and t/lib-httpd.sh doesn't know
how to set up such tests. See [1] for the start of a discussion about
what it would take to have divergent "t/lib-httpd/apache.conf" test
setups. #leftoverbits
1. https://lore.kernel.org/git/YUonS1uoZlZEt+Yd@coredump.intra.peff.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_feature_value() takes an offset, and uses it to seek past the
point in features_list that we've already seen. However if the feature
being searched for does not specify a value, the offset is not
updated. Therefore if we call parse_feature_value() in a loop on a
value-less feature, we'll keep on parsing the same feature over and over
again. This usually isn't an issue: there's no point in using
next_server_feature_value() to search for repeated instances of the same
capability unless that capability typically specifies a value - but a
broken server could send a response that omits the value for a feature
even when we are expecting a value.
Therefore we add an offset update calculation for the no-value case,
which helps ensure that loops using next_server_feature_value() will
always terminate.
next_server_feature_value(), and the offset calculation, were first
added in 2.28 in 2c6a403d96 (connect: add function to parse multiple
v1 capability values, 2020-05-25).
Thanks to Peff for authoring the test.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make githooks(5) the source of truth for what hooks git supports, and
punt out early on hooks we don't know about in find_hook(). This
ensures that the documentation and the C code's idea about existing
hooks doesn't diverge.
We still have Perl and Python code running its own hooks, but that'll
be addressed by Emily Shaffer's upcoming "git hook run" command.
This resolves a long-standing TODO item in bugreport.c of there being
no centralized listing of hooks, and fixes a bug with the bugreport
listing only knowing about 1/4 of the p4 hooks. It didn't know about
the recent "reference-transaction" hook either.
We could make the find_hook() function die() or BUG() out if the new
known_hook() returned 0, but let's make it return NULL just as it does
when it can't find a hook of a known type. Making it die() is overly
anal, and unlikely to be what we need in catching stupid typos in the
name of some new hook hardcoded in git.git's sources. By making this
be tolerant of unknown hook names, changes in a later series to make
"git hook run" run arbitrary user-configured hook names will be easier
to implement.
I have not been able to directly test the CMake change being made
here. Since 4c2c38e800 (ci: modification of main.yml to use cmake for
vs-build job, 2020-06-26) some of the Windows CI has a hard dependency
on CMake, this change works there, and is to my eyes an obviously
correct use of a pattern established in previous CMake changes,
namely:
- 061c2240b1 (Introduce CMake support for configuring Git,
2020-06-12)
- 709df95b78 (help: move list_config_help to builtin/help,
2020-04-16)
- 976aaedca0 (msvc: add a Makefile target to pre-generate the Visual
Studio solution, 2019-07-29)
The LC_ALL=C is needed because at least in my locale the dash ("-") is
ignored for the purposes of sorting, which results in a different
order. I'm not aware of anything in git that has a hard dependency on
the order, but e.g. the bugreport output would end up using whatever
locale was in effect when git was compiled.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new hook_exists() function instead of find_hook() where the
latter was called in boolean contexts. This make subsequent changes in
a series where we further refactor the hook API clearer, as we won't
conflate wanting to get the path of the hook with checking for its
existence.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a boolean version of the find_hook() function for those callers
who are only interested in checking whether the hook exists, not what
the path to it is.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the find_hook() function from run-command.c to a new hook.c
library. This change establishes a stub library that's pretty
pointless right now, but will see much wider use with Emily Shaffer's
upcoming "configuration-based hooks" series.
Eventually all the hook related code will live in hook.[ch]. Let's
start that process by moving the simple find_hook() function over
as-is.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Here, GCC warns about every use of the INIT_PROC_ADDR macro, for example:
In file included from compat/mingw.c:8:
compat/mingw.c: In function 'mingw_strftime':
compat/win32/lazyload.h:38:12: warning: assignment to
'size_t (*)(char *, size_t, const char *, const struct tm *)'
{aka 'long long unsigned int (*)(char *, long long unsigned int,
const char *, const struct tm *)'} from incompatible pointer type
'FARPROC' {aka 'long long int (*)()'} [-Wincompatible-pointer-types]
38 | (function = get_proc_addr(&proc_addr_##function))
| ^
compat/mingw.c:1014:6: note: in expansion of macro 'INIT_PROC_ADDR'
1014 | if (INIT_PROC_ADDR(strftime))
| ^~~~~~~~~~~~~~
(message wrapped for convenience). Insert a cast to keep the compiler
happy. A cast is fine in these cases because they are generic function
pointer values that have been looked up in a DLL.
Helped-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests in t3705-add-sparse-checkout.sh check to see how 'git add'
behaves with paths outside the sparse-checkout definition. These
currently check to see if a given warning is present but not that the
index is not updated with the sparse entries. Add a new
'test_sparse_entry_unstaged' helper to be sure 'git add' is behaving
correctly.
We need to modify setup_sparse_entry to actually commit the sparse_entry
file so it exists at HEAD and as an entry in the index, but its exact
contents are not staged in the index.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Noting that unpack_trees treats reset=1 & update=1 as license to nuke
untracked files, I looked for code paths that use this combination and
tried to generate testcases which demonstrated unintentional loss of
untracked files and directories. I found several.
I also include testcases for `git reset --{hard,merge,keep}`. A hard
reset is perhaps the most direct test of unpack_tree's reset=1 behavior,
but we cannot make `git reset --hard` preserve untracked files without
some migration work.
Also, the two commands `checkout --force` (because of the --force) and
`read-tree --reset` (because it's plumbing and we need to keep it
backward compatible) were left out as we expect those to continue
removing untracked files and directories.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unusable entries of a damaged pack file are recorded in the oidset
bad_objects. Release it when we're done with the pack.
This doesn't affect intact packs because an empty oidset requires
no allocation.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
54fd3243da ("rebase -i: reread the todo list if `exec` touched it",
2017-04-26) sought to reread the todo list after running an exec
command only if it had been changed. To accomplish this it checks the
stat data of the todo list after running an exec command to see if it
has changed. Unfortunately there are two problems, firstly the
implementation is buggy we actually reread the list after each exec
which is quadratic in the number of commit lookups and secondly the
design is predicated on using nanosecond time stamps which are not the
default.
The implementation bug stems from the fact that we write a new todo
list to disk before running each command but do not update the stat
data to reflect this[1].
The design problem is that it is possible for the user to edit the
todo list without changing its size or inode which means we have to
rely on the mtime to tell us if it has changed. Unfortunately unless
git is built with USE_NSEC it is possible for the original and edited
list to share the same mtime.
Ideally "git rebase --edit-todo" would set a flag that we would then
check in sequencer.c. Unfortunately this is approach will not work as
there are scripts in the wild that write to the todo list directly
without running "git rebase --edit-todo". Instead of relying on stat
data this patch simply reads the possibly edited todo list and
compares it to the original with memcmp(). This is much faster than
reparsing the todo list each time. This patch reduces the time to run
git rebase -r -xtrue v2.32.0~100 v2.32.0
which runs 419 exec commands by 6.6%. For comparison fixing the
implementation bug in stat based approach reduces the time by a
further 1.4% and is indistinguishable from never rereading the todo
list.
[1] https://lore.kernel.org/git/20191125131833.GD23183@szeder.dev/
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code is heavily indented and obscures the high level logic within
the loop. Let's move it to its own function before modifying it in the
next commit. Note that there is a subtle change in behavior if the
todo list cannot be reread. Previously todo_list->current was
incremented before returning, now it returns immediately.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MIDX files are used by default since commit 18e449f86b
(midx: enable core.multiPackIndex by default, 2020-09-25)
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This comment added in dfea575017 (Makefile: lazily compute header
dependencies, 2010-01-26) has been out of date since
92b88eba9f (Makefile: use `git ls-files` to list header files, if
possible, 2019-03-04), when we did exactly what it tells us not to do
and added $(GENERATED_H) to $(OBJECTS) dependencies.
The rest of it was also somewhere between inaccurate and outdated,
since as of b8ba629264 (Makefile: fold MISC_H into LIB_H, 2012-06-20)
it's not followed by a list of header files, that got moved earlier in
the file into LIB_H in 60d24dd255 (Makefile: fold XDIFF_H and VCSSVN_H
into LIB_H, 2012-07-06).
Let's just remove it entirely, to the extent that we have anything
useful to say here the comment on the
"USE_COMPUTED_HEADER_DEPENDENCIES" variable a few lines above this
change does the job for us.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "cmd.sh > $@+ && mv $@+ $@" pattern used for generating the
config-list.h and command-list.h to just "cmd.sh >$@". This was needed
as a guard to ensure that we don't have an empty file if the script
failed, but since 7b76d6bf22 (Makefile: add and use the
".DELETE_ON_ERROR" flag, 2021-06-29) GNU make ensures that doesn't
happen.
There's still a lot of other places in the Makefile where we
needlessly use this pattern, but I'm just changing these because I'm
about to add a new $(GENERATED_H) target, let's have them all look and
act the same way.
Even with ".DELETE_ON_ERROR" there is still a point to using the "mv
$@+ $@" pattern in some cases, e.g. to ensure that you have a working
binary during recompilation (see [1] for the start of a long
discussion about that), but that doesn't apply here. Nothing external
uses $(GENERATED_H) directly, it's only ever used in the context of
the Makefile's own dependency (re-)generation.
1. https://lore.kernel.org/git/8735t93h0u.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change various places that hardcode the names of these two files to
refer to either $(GENERATED_H), or to a new generated-hdrs
target. That target is consistent with the *-objs targets I recently
added in 029bac01a8 (Makefile: add {program,xdiff,test,git,fuzz}-objs
& objects targets, 2021-02-23).
A subsequent commit will add a new generated hook-list.h. By doing
this refactoring we'll only need to add the new file to the
GENERATED_H variable, not EXCEPT_HDRS, the vcbuild/README etc.
Hardcoding command-list.h there seems to have been a case of
copy/paste programming in 976aaedca0 (msvc: add a Makefile target to
pre-generate the Visual Studio solution, 2019-07-29). The
config-list.h was added later in 709df95b78 (help: move
list_config_help to builtin/help, 2020-04-16).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug in 44c9e8594e (Fix up header file dependencies and add
sparse checking rules, 2005-07-03), we never marked the phony "check"
target as such.
Perhaps we should just remove it, since as of a combination of
912f9980d2 (Makefile: help people who run 'make check' by mistake,
2008-11-11) 0bcd9ae85d (sparse: Fix errors due to missing
target-specific variables, 2011-04-21) we've been suggesting the user
run "make sparse" directly.
But under that mode it still does something, as well as directing the
user to run "make test" under non-sparse. So let's punt that and
narrowly fix the PHONY bug.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 73c3253d75 (bundle: framework for options before bundle file,
2019-11-10) the "git bundle" command was refactored to use
parse_options(). In that refactoring it started understanding the
"--verbose" flag before the subcommand, e.g.:
git bundle --verbose verify --quiet
However, nothing ever did anything with this "verbose" variable, and
the change wasn't documented. It appears to have been something that
escaped the lab, and wasn't flagged by reviewers at the time. Let's
just remove it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error in "git help no-such-git-command" is handled better.
* ma/help-w-check-for-requested-page:
help: make sure local html page exists before calling external processes
Adjust credential-cache helper to Windows.
* cb/unix-sockets-with-windows:
git-compat-util: include declaration for unix sockets in windows
credential-cache: check for windows specific errors
t0301: fixes for windows compatibility
An oddball OPTION_ARGUMENT feature has been removed from the
parse-options API.
* ab/retire-option-argument:
parse-options API: remove OPTION_ARGUMENT feature
difftool: use run_command() API in run_file_diff()
difftool: prepare "diff" cmdline in cmd_difftool()
difftool: prepare "struct child_process" in cmd_difftool()
Rewrite of "git bisect" in C continues.
* mr/bisect-in-c-4:
bisect--helper: retire `--bisect-next-check` subcommand
bisect--helper: reimplement `bisect_run` shell function in C
bisect--helper: reimplement `bisect_visualize()` shell function in C
run-command: make `exists_in_PATH()` non-static
t6030-bisect-porcelain: add test for bisect visualize
t6030-bisect-porcelain: add tests to control bisect run exit cases
Conditional compilation around versions of libcURL has been
straightened out.
* ab/http-drop-old-curl-plus:
http: don't hardcode the value of CURL_SOCKOPT_OK
http: centralize the accounting of libcurl dependencies
http: correct curl version check for CURLOPT_PINNEDPUBLICKEY
http: correct version check for CURL_HTTP_VERSION_2
http: drop support for curl < 7.18.0 (again)
Makefile: drop support for curl < 7.9.8 (again)
INSTALL: mention that we need libcurl 7.19.4 or newer to build
INSTALL: reword and copy-edit the "libcurl" section
INSTALL: don't mention the "curl" executable at all
Taking advantage of the CGI interface, http-backend has been
updated to enable protocol v2 automatically when the other side
asks for it.
* jk/http-server-protocol-versions:
docs/protocol-v2: point readers transport config discussion
docs/git: discuss server-side config for GIT_PROTOCOL
docs/http-backend: mention v2 protocol
http-backend: handle HTTP_GIT_PROTOCOL CGI variable
t5551: test v2-to-v0 http protocol fallback
Replace a handcrafted data structure used to keep track of bad
objects in the packfile API by an oidset.
* rs/packfile-bad-object-list-in-oidset:
packfile: use oidset for bad objects
packfile: convert has_packed_and_bad() to object_id
packfile: convert mark_bad_packed_object() to object_id
midx: inline nth_midxed_pack_entry()
oidset: make oidset_size() an inline function
When "git am --abort" fails to abort correctly, it still exited
with exit status of 0, which has been corrected.
* en/am-abort-fix:
am: fix incorrect exit status on am fail to abort
t4151: add a few am --abort tests
git-am.txt: clarify --abort behavior
"git update-ref --stdin" failed to flush its output as needed,
which potentially led the conversation to a deadlock.
* ps/update-ref-batch-flush:
t1400: avoid SIGPIPE race condition on fifo
update-ref: fix streaming of status updates
While git can be compiled with SANITIZE=leak, we have not run
regression tests under that mode. Memory leaks have only been fixed as
one-offs without structured regression testing.
This change adds CI testing for it. We'll now build and small set of
whitelisted t00*.sh tests under Linux with a new job called
"linux-leaks".
The CI target uses a new GIT_TEST_PASSING_SANITIZE_LEAK=true test
mode. When running in that mode, we'll assert that we were compiled
with SANITIZE=leak. We'll then skip all tests, except those that we've
opted-in by setting "TEST_PASSES_SANITIZE_LEAK=true".
A test setting "TEST_PASSES_SANITIZE_LEAK=true" setting can in turn
make use of the "SANITIZE_LEAK" prerequisite, should they wish to
selectively skip tests even under
"GIT_TEST_PASSING_SANITIZE_LEAK=true". In the preceding commit we
started doing this in "t0004-unwritable.sh" under SANITIZE=leak, now
it'll combine nicely with "GIT_TEST_PASSING_SANITIZE_LEAK=true".
This is how tests that don't set "TEST_PASSES_SANITIZE_LEAK=true" will
be skipped under GIT_TEST_PASSING_SANITIZE_LEAK=true:
$ GIT_TEST_PASSING_SANITIZE_LEAK=true ./t0001-init.sh
1..0 # SKIP skip all tests in t0001 under SANITIZE=leak, TEST_PASSES_SANITIZE_LEAK not set
The intent is to add more TEST_PASSES_SANITIZE_LEAK=true annotations
as follow-up change, but let's start small to begin with.
In ci/run-build-and-tests.sh we make use of the default "*" case to
run "make test" without any GIT_TEST_* modes. SANITIZE=leak is known
to fail in combination with GIT_TEST_SPLIT_INDEX=true in
t0016-oidmap.sh, and we're likely to have other such failures in
various GIT_TEST_* modes. Let's focus on getting the base tests
passing, we can expand coverage to GIT_TEST_* modes later.
It would also be possible to implement a more lightweight version of
this by only relying on setting "LSAN_OPTIONS". See
<YS9OT/pn5rRK9cGB@coredump.intra.peff.net>[1] and
<YS9ZIDpANfsh7N+S@coredump.intra.peff.net>[2] for a discussion of
that. I've opted for this approach of adding a GIT_TEST_* mode instead
because it's consistent with how we handle other special test modes.
Being able to add a "!SANITIZE_LEAK" prerequisite and calling
"test_done" early if it isn't satisfied also means that we can more
incrementally add regression tests without being forced to fix
widespread and hard-to-fix leaks at the same time.
We have tests that do simple checking of some tool we're interested
in, but later on in the script might be stressing trace2, or common
sources of leaks like "git log" in combination with the tool (e.g. the
commit-graph tests). To be clear having a prerequisite could also be
accomplished by using "LSAN_OPTIONS" directly.
On the topic of "LSAN_OPTIONS": It would be nice to have a mode to
aggregate all failures in our various scripts, see [2] for a start at
doing that which sets "log_path" in "LSAN_OPTIONS". I've punted on
that for now, it can be added later.
As of writing this we've got major regressions between master..seen,
i.e. the t000*.sh tests and more fixed since 31f9acf9ce (Merge branch
'ah/plugleaks', 2021-08-04) have regressed recently.
See the discussion at <87czsv2idy.fsf@evledraar.gmail.com>[3] about
the lack of this sort of test mode, and 0e5bba53af (add UNLEAK
annotation for reducing leak false positives, 2017-09-08) for the
initial addition of SANITIZE=leak.
See also 09595ab381 (Merge branch 'jk/leak-checkers', 2017-09-19),
7782066f67 (Merge branch 'jk/apache-lsan', 2019-05-19) and the recent
936e58851a (Merge branch 'ah/plugleaks', 2021-05-07) for some of the
past history of "one-off" SANITIZE=leak (and more) fixes.
As noted in [5] we can't support this on OSX yet until Clang 14 is
released, at that point we'll probably want to resurrect that
"osx-leaks" job.
1. https://github.com/google/sanitizers/wiki/AddressSanitizerLeakSanitizer
2. https://lore.kernel.org/git/YS9OT%2Fpn5rRK9cGB@coredump.intra.peff.net/
3. https://lore.kernel.org/git/87czsv2idy.fsf@evledraar.gmail.com/
4. https://lore.kernel.org/git/YS9ZIDpANfsh7N+S@coredump.intra.peff.net/
5. https://lore.kernel.org/git/20210916035603.76369-1-carenas@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When SANITIZE=leak is specified we'll now add a SANITIZE_LEAK flag to
GIT-BUILD-OPTIONS, this can then be picked up by the test-lib.sh,
which sets a SANITIZE_LEAK prerequisite.
We can then skip specific tests that are known to fail under
SANITIZE=leak, add one such annotation to t0004-unwritable.sh, which
now passes under SANITIZE=leak.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The difftool dir-diff mode handles symlinks by replacing them with their
readlink(2) values. This allows diff tools to see changes to symlinks
as if they were regular text diffs with the old and new path values.
This is analogous to what "git diff" displays when symlinks change.
The temporary diff directories that are created initially contain
symlinks because they get checked-out using a temporary index that
retains the original symlinks as checked-in to the repository.
A bug was introduced when difftool was rewritten in C that made
difftool write the readlink(2) contents into the pointed-to file rather
than the symlink itself. The write was going through the symlink and
writing to its target rather than writing to the symlink path itself.
Replace symlinks with raw text files by unlinking the symlink path
before writing the readlink(2) content into them.
When 18ec800512 (difftool: handle modified symlinks in dir-diff mode,
2017-03-15) added handling for modified symlinks this bug got recorded
in the test suite. The tests included the pointed-to symlink target
paths. These paths were being reported because difftool was erroneously
writing to them, but they should have never been reported nor written.
Correct the modified-symlinks test cases by removing the target files
from the expected output.
Add a test to ensure that symlinks are written with the readlink(2)
values and that the target files contain their original content.
Reported-by: Alan Blotz <work@blotz.org>
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a git_config() call was added in dbfae68969 (help: reuse
print_columns() for help -a, 2012-04-13) to read the column config
we'd always use the resulting "colopts" variable.
Then in 63eae83f8f (help: add "-a --verbose" to list all commands
with synopsis, 2018-05-20) we started only using the "colopts" config
under "--all" if "--no-verbose" was also given, but the "git_config()"
call was not moved inside the "verbose" branch of the code.
This change effectively does that, we'll only call list_commands()
under "--all --no-verbose", so let's have it look up the config it
needs. See 26c7d06783 (help -a: improve and make --verbose default, 2018-09-29) for another case in help.c where we look up config.
The get_colopts() function is named for consistency with the existing
get_alias() function added in 26c7d06783.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "help" builtin has been able to emit configuration variables since
e17ca92637 (completion: drop the hard coded list of config vars,
2018-05-26), but it hasn't produced exactly the format the completion
script wanted. Let's do that.
We got partway there in 2675ea1cc0 (completion: use 'sort -u' to
deduplicate config variable names, 2019-08-13) and
d9438873c4 (completion: deduplicate configuration sections,
2019-08-13), but after both we still needed some sorting,
de-duplicating and awk post-processing of the list.
We can instead simply do the relevant parsing ourselves (we were doing
most of it already), and call string_list_remove_duplicates() after
already sorting the list, so the caller doesn't need to invoke "sort
-u". The "--config-for-completion" output is the same as before after
being passed through "sort -u".
Then add a new "--config-sections-for-completion" option. Under that
output we'll emit config sections like "alias" (instead of "alias." in
the --config-for-completion output).
We need to be careful to leave the "--config-for-completion" option
compatible with users git, but are still running a shell with an older
git-completion.bash. If we e.g. changed the option name they'd see
messages about git-completion.bash being unable to find the
"--config-for-completion" option.
Such backwards compatibility isn't something we should bend over
backwards for, it's only helping users who:
* Upgrade git
* Are in an old shell
* The git-completion.bash in that shell hasn't cached the old
"--config-for-completion" output already.
But since it's easy in this case to retain compatibility, let's do it,
the older versions of git-completion.bash won't care that the input
they get doesn't change after a "sort -u".
While we're at it let's make "--config-for-completion" die if there's
anything left over in "argc", and do the same in the new
"--config-sections-for-completion" option.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a regression test for the --config-for-completion option, this was
tested for indirectly with the test added in 7a09a8f093 (completion:
add tests for 'git config' completion, 2019-08-13), but let's do it
directly here as well.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As preceding commits have incrementally established all of the --all,
--guides, --config and hidden --config-for-completion options are
mutually exclusive. So let's use OPT_CMDMODE() to parse the
command-line instead, and take advantage of its conflicting options
detection.
This is the first command with a hidden CMDMODE, so let's introduce a
OPT_CMDMODE_F() macro to go along with OPT_CMDMODE().
I think this makes the usage information that we emit slightly worse,
e.g. before we'd emit:
$ git help --all --config
fatal: --config and --all cannot be combined
usage: git help [-a|--all] [--[no-]verbose]]
[[-i|--info] [-m|--man] [-w|--web]] [<command>]
or: git help [-g|--guides]
or: git help [-c|--config]
[...]
$
And now:
$ git help --all --config
error: option `config' is incompatible with --all
$
But improving that is a general topic for parse-options.c improvement,
i.e. we should probably emit the full usage in that case.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --all and --guides commands could be combined, which wouldn't have
any impact on the output except for:
git help --all --guides --no-verbose
Listing the guide alongside that output was clearly not intended, so
let's error out here. See 002b726a40 (builtin/help.c: add
list_common_guides_help() function, 2013-04-02) for the initial
implementation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug in the --config option that's been there ever since its
introduction in 3ac68a93fd (help: add --config to list all available
config, 2018-05-26). Die when --all and --config are combined,
combining them doesn't make sense.
The code for the --config option when combined with an earlier
refactoring done to support the --guide option in
65f98358c0 (builtin/help.c: add --guide option, 2013-04-02) would
cause us to take the "--all" branch early and ignore the --config
option.
Let's instead list these as incompatible, both in the synopsis and
help output, and enforce it in the code itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a missing test for checking what the --config output added in
ac68a93fd2 (help: add --config to list all available config,
2018-05-26) looks like. We should not be emitting anything except
config variables and the brief usage information at the end here.
The second test regexp here might not match three-level variables in
general, as their second level could contain ".", but in this case
we're always emitting what we extract from the documentation, so it's
all strings like:
foo.<name>.bar
If we did introduce something like variable example content here we'd
like this to break, since we'd then be likely to break the
git-completion.bash.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted in 65f98358c0 (builtin/help.c: add --guide option,
2013-04-02) and a133737b80 (doc: include --guide option description
for "git help", 2013-04-02) which introduced the --guide option, it
cannot be combined with e.g. <command>.
Change the command and the "SYNOPSIS" section to reflect that desired
behavior. Now that we assert this in code we don't need to
exhaustively describe the previous confusing behavior in the
documentation either, instead of silently ignoring the provided
argument we'll now error out.
The "We're done. Ignore any remaining args" comment added in
15f7d49438 (builtin/help.c: split "-a" processing into two,
2013-04-02) can now be removed, it's obvious that we're asserting the
behavior with the check of "argc".
The "--config" option is still missing from the synopsis, it will be
added in a subsequent commit where we'll fix bugs in its
implementation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/grep-haystack-is-read-only:
grep: store grep_source buffer as const
grep: mark "haystack" buffers as const
grep: stop modifying buffer in grep_source_1()
grep: stop modifying buffer in show_line()
grep: stop modifying buffer in strip_timestamp
The "COMPUTE_HEADER_DEPENDENCIES" feature added in [1] was extended to
use auto-detection in [2], that "auto" detection has always piped
STDERR to /dev/null, so any failures on compilers that didn't support
these GCC flags would silently fall back to
"COMPUTE_HEADER_DEPENDENCIES=no".
Later when -Wpedantic support was added to DEVOPTS in [3] we started
passing -Wpedantic in combination with -Werror to the compiler
here. Note (to the pedantic): [3] actually passed "-pedantic", but it
and "-Wpedantic" are synonyms.
Turning on -Wpedantic in [3] broke the auto-detection, since this
relies on compiling an empty program. GCC would loudly complain on
STDERR:
/dev/null:1: error: ISO C forbids an empty translation unit
[-Werror=pedantic]
cc1: note: unrecognized command-line option
‘-Wno-pedantic-ms-format’ may have been intended to silence
earlier diagnostics
cc1: all warnings being treated as errors
But as that ended up in the "$(dep_check)" variable due to the "2>&1"
in [2] we didn't see it.
Then when [4] made DEVOPTS=pedantic the default specifying
"DEVELOPER=1" would effectively set "COMPUTE_HEADER_DEPENDENCIES=no".
To fix these issues let's unconditionally pass -Wno-pedantic after
$(ALL_CFLAGS), we might get a -Wpedantic via config.mak.dev after, or
the builder might specify it via CFLAGS. In either case this will undo
current and future problems with -Wpedantic.
I think it would make sense to simply remove the "2>&1", it would mean
that anyone using a non-GCC-like compiler would get warnings under
COMPUTE_HEADER_DEPENDENCIES=auto, e.g on AIX's xlc would emit:
/opt/IBM/xlc/13.1.3/bin/.orig/xlc: 1501-208 (S) command option D is missing a subargument
Non-zero 40 exit with COMPUTE_HEADER_DEPENDENCIES=auto, set it to "yes" or "no" to quiet auto-detect
And on Solaris with SunCC:
cc: Warning: Option -x passed to ld, if ld is invoked, ignored otherwise
cc: refused to overwrite input file by output file: /dev/null
cc: Warning: Option -x passed to ld, if ld is invoked, ignored otherwise
cc: refused to overwrite input file by output file: /dev/null
Non-zero 1 exit with COMPUTE_HEADER_DEPENDENCIES=auto, set it to "yes" or "no" to quiet auto-detect
Both could be quieted by setting COMPUTE_HEADER_DEPENDENCIES=no
explicitly, as suggested, but let's see if this'll fix it without
emitting too much noise at those that aren't using "gcc" or "clang".
1. f2fabbf76e (Teach Makefile to check header dependencies,
2010-01-26)
2. 111ee18c31 (Makefile: Use computed header dependencies if the
compiler supports it, 2011-08-18)
3. 729b3925ed (Makefile: add a DEVOPTS flag to get pedantic
compilation, 2018-07-24)
4. 6a8cbc41ba (developer: enable pedantic by default, 2021-09-03)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "sparse" target and its *.sp dependencies to be
non-.PHONY. Before this change "make sparse" would take ~5s to re-run
all the *.c files through "cgcc", after it it'll create an empty *.sp
file sitting alongside the *.c file, only if the *.c file or its
dependencies are newer than the *.sp is the *.sp re-made.
We ensure that the recursive dependencies are correct by depending on
the *.o file, which in turn will have correct dependencies by either
depending on all header files, or under
"COMPUTE_HEADER_DEPENDENCIES=yes" the headers it needs.
This means that a plain "make sparse" is much slower, as we'll now
need to make the *.o files just to create the *.sp files, but
incrementally creating the *.sp files is *much* faster and less
verbose, it thus becomes viable to run "sparse" along with "all" as
e.g. "git rebase --exec 'make all sparse'".
On my box with -j8 "make sparse" was fast before, or around 5 seconds,
now it only takes that long the first time, and the common case is
<100ms, or however long it takes GNU make to stat the *.sp file and
see that all the corresponding *.c file and its dependencies are
older.
See 0bcd9ae85d (sparse: Fix errors due to missing target-specific
variables, 2011-04-21) for the modern implementation of the sparse
target being changed here.
It is critical that we use -Wsparse-error here, otherwise the error
would only show up once, but we'd successfully create the empty *.sp
file, and running a second time wouldn't show the error. I'm therefore
not putting it into SPARSE_FLAGS or SP_EXTRA_FLAGS, it's not optional,
the Makefile logic won't behave properly without it.
Appending to $@ without a move is OK here because we're using the
.DELETE_ON_ERROR Makefile feature. See 7b76d6bf22 (Makefile: add and
use the ".DELETE_ON_ERROR" flag, 2021-06-29). GNU make ensures that on
error this file will be removed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When HTTP/2 is in use, we fail to correctly redact "Authorization" (and
other) headers in our GIT_TRACE_CURL output.
We get the headers in our CURLOPT_DEBUGFUNCTION callback, curl_trace().
It passes them along to curl_dump_header(), which in turn checks
redact_sensitive_header(). We see the headers as a text buffer like:
Host: ...
Authorization: Basic ...
After breaking it into lines, we match each header using skip_prefix().
This is case-sensitive, even though HTTP headers are case-insensitive.
This has worked reliably in the past because these headers are generated
by curl itself, which is predictable in what it sends.
But when HTTP/2 is in use, instead we get a lower-case "authorization:"
header, and we fail to match it. The fix is simple: we should match with
skip_iprefix().
Testing is more complicated, though. We do have a test for the redacting
feature, but we don't hit the problem case because our test Apache setup
does not understand HTTP/2. You can reproduce the issue by applying this
on top of the test change in this patch:
diff --git a/t/lib-httpd/apache.conf b/t/lib-httpd/apache.conf
index afa91e38b0..19267c7107 100644
--- a/t/lib-httpd/apache.conf
+++ b/t/lib-httpd/apache.conf
@@ -29,6 +29,9 @@ ErrorLog error.log
LoadModule setenvif_module modules/mod_setenvif.so
</IfModule>
+LoadModule http2_module modules/mod_http2.so
+Protocols h2c
+
<IfVersion < 2.4>
LockFile accept.lock
</IfVersion>
@@ -64,8 +67,8 @@ LockFile accept.lock
<IfModule !mod_access_compat.c>
LoadModule access_compat_module modules/mod_access_compat.so
</IfModule>
-<IfModule !mod_mpm_prefork.c>
- LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
+<IfModule !mod_mpm_event.c>
+ LoadModule mpm_event_module modules/mod_mpm_event.so
</IfModule>
<IfModule !mod_unixd.c>
LoadModule unixd_module modules/mod_unixd.so
diff --git a/t/t5551-http-fetch-smart.sh b/t/t5551-http-fetch-smart.sh
index 1c2a444ae7..ff74f0ae8a 100755
--- a/t/t5551-http-fetch-smart.sh
+++ b/t/t5551-http-fetch-smart.sh
@@ -24,6 +24,10 @@ test_expect_success 'create http-accessible bare repository' '
git push public main:main
'
+test_expect_success 'prefer http/2' '
+ git config --global http.version HTTP/2
+'
+
setup_askpass_helper
test_expect_success 'clone http repository' '
but this has a few issues:
- it's not necessarily portable. The http2 apache module might not be
available on all systems. Further, the http2 module isn't compatible
with the prefork mpm, so we have to switch to something else. But we
don't necessarily know what's available. It would be nice if we
could have conditional config, but IfModule only tells us if a
module is already loaded, not whether it is available at all.
This might be a non-issue. The http tests are already optional, and
modern-enough systems may just have both of these. But...
- if we do this, then we'd no longer be testing HTTP/1.1 at all. I'm
not sure how much that matters since it's all handled by curl under
the hood, but I'd worry that some detail leaks through. We'd
probably want two scripts running similar tests, one with HTTP/2 and
one with HTTP/1.1.
- speaking of which, a later test fails with the patch above! The
problem is that it is making sure we used a chunked
transfer-encoding by looking for that header in the trace. But
HTTP/2 doesn't support that, as it has its own streaming mechanisms
(the overall operation works fine; we just don't see the header in
the trace).
Furthermore, even with the changes above, this test still does not
detect the current failure, because we see _both_ HTTP/1.1 and HTTP/2
requests, which confuse it. Quoting only the interesting bits from the
resulting trace file, we first see:
=> Send header: GET /auth/smart/repo.git/info/refs?service=git-upload-pack HTTP/1.1
=> Send header: Connection: Upgrade, HTTP2-Settings
=> Send header: Upgrade: h2c
=> Send header: HTTP2-Settings: AAMAAABkAAQCAAAAAAIAAAAA
<= Recv header: HTTP/1.1 401 Unauthorized
<= Recv header: Date: Wed, 22 Sep 2021 20:03:32 GMT
<= Recv header: Server: Apache/2.4.49 (Debian)
<= Recv header: WWW-Authenticate: Basic realm="git-auth"
So the client asks for HTTP/2, but Apache does not do the upgrade for
the 401 response. Then the client repeats with credentials:
=> Send header: GET /auth/smart/repo.git/info/refs?service=git-upload-pack HTTP/1.1
=> Send header: Authorization: Basic <redacted>
=> Send header: Connection: Upgrade, HTTP2-Settings
=> Send header: Upgrade: h2c
=> Send header: HTTP2-Settings: AAMAAABkAAQCAAAAAAIAAAAA
<= Recv header: HTTP/1.1 101 Switching Protocols
<= Recv header: Upgrade: h2c
<= Recv header: Connection: Upgrade
<= Recv header: HTTP/2 200
<= Recv header: content-type: application/x-git-upload-pack-advertisement
So the client does properly redact there, because we're speaking
HTTP/1.1, and the server indicates it can do the upgrade. And then the
client will make further requests using HTTP/2:
=> Send header: POST /auth/smart/repo.git/git-upload-pack HTTP/2
=> Send header: authorization: Basic dXNlckBob3N0OnBhc3NAaG9zdA==
=> Send header: content-type: application/x-git-upload-pack-request
And there we can see that the credential is _not_ redacted. This part of
the test is what gets confused:
# Ensure that there is no "Basic" followed by a base64 string, but that
# the auth details are redacted
! grep "Authorization: Basic [0-9a-zA-Z+/]" trace &&
grep "Authorization: Basic <redacted>" trace
The first grep does not match the un-redacted HTTP/2 header, because
it insists on an uppercase "A". And the second one does find the
HTTP/1.1 header. So as far as the test is concerned, everything is OK,
but it failed to notice the un-redacted lines.
We can make this test (and the other related ones) more robust by adding
"-i" to grep case-insensitively. This isn't really doing anything for
now, since we're not actually speaking HTTP/2, but it future-proofs the
tests for a day when we do (either we add explicit HTTP/2 test support,
or it's eventually enabled by default by our Apache+curl test setup).
And it doesn't hurt in the meantime for the tests to be more careful.
The change to use "grep -i", coupled with the changes to use HTTP/2
shown above, causes the test to fail with the current code, and pass
after this patch is applied.
And finally, there's one other way to demonstrate the issue (and how I
actually found it originally). Looking at GIT_TRACE_CURL output against
github.com, you'll see the unredacted output, even if you didn't set
http.version. That's because setting it is only necessary for curl to
send the extra headers in its HTTP/1.1 request that say "Hey, I speak
HTTP/2; upgrade if you do, too". But for a production site speaking
https, the server advertises via ALPN, a TLS extension, that it supports
HTTP/2, and the client can immediately start using it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove spaces in `non - zero` and add a space between the diff
format/mode and option parentheses in difftool's usage strings.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we've split up the write_sub_test_lib_test*() and
run_sub_test_lib_test*() functions let's fix those tests in
t0000-basic.sh that were verbosely copy/pasting earlier tests.
That we caught all of them was asserted with a follow-up change that's
not part of this series[1], we might add such a duplication check at
some later time, but for now let's just one-off remove the duplicate
boilerplate.
1. https://lore.kernel.org/git/patch-v3-6.9-bc79b29f3c-20210805T103237Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the testing for test-lib.sh itself to assert that we have a
exit code of 1, not any non-zero. Improves code added in
0445e6f0a1 (test-lib: '--run' to run only specific tests,
2014-04-30).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the two check_sub_test_lib_test*() functions to avoid
duplicating the same comparison they did of stdout. This duplication
was initially added when check_sub_test_lib_test_err() was added in
0445e6f0a1 (test-lib: '--run' to run only specific tests,
2014-04-30).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The use of a sub-shell for running the test_cmp of stdout/stderr for
the test author was introduced in this form in 565b6fa87b (tests:
refactor mechanics of testing in a sub test-lib, 2012-12-16), but from
looking at the history that seemed to have diligently copied my
original ad-hoc implementation in 7b90511970 (t/t0000-basic.sh: Run
the passing TODO test inside its own test-lib, 2010-08-19).
There's no reason to use a subshell here, we try to avoid it in
general. It also improves readability, if the test fails we print out
the relative path in the trash directory that needs to be looked
at.
Before that was mostly obscured, since the "write_sub_test_lib_test"
will pick the directory for you from the test name.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the $test_description provided for the generated subtests to be
constant, since the only purpose of having it is that test-lib.sh will
barf if it isn't supplied.
The other purpose of having it was to effectively split up the test
description between the argument to test_expect_success and the
argument to "write_and_run_sub_test_lib_test". Let's only use one of
the two.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the function to write and run tests of the test-lib.sh output
into two functions.
When this was added back in 565b6fa87b (tests: refactor mechanics of
testing in a sub test-lib, 2012-12-16) there was no reason to do this,
but since we started supporting test arguments in
517cd55fd5 (test-lib: self-test that --verbose works, 2013-06-23)
we've started to write out duplicate tests simply to test different
arguments, now we'll be able to re-use them.
This change doesn't consolidate any of those tests yet, it just makes
it possible to do so. All the changes in t0000-basic.sh are a simple
search-replacement.
Since the _run_sub_test_lib_test_common() function doesn't handle
running the test anymore we can do away with the sub-shell, which was
used to scope an "unset" and "export" shell variables.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some commands such as "git stash" emit continued options output with
e.g. "git stash -h", because usage_with_options_internal() prefixes
with its own whitespace the resulting output wasn't properly
aligned. Let's account for the added whitespace, which properly aligns
the output.
The "git stash" command has usage output with a N_() translation that
legitimately stretches across multiple lines;
N_("git stash [push [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet]\n"
" [-u|--include-untracked] [-a|--all] [-m|--message <message>]\n"
[...]
We'd like to have that output aligned with the length of the initial
"git stash " output, but since usage_with_options_internal() adds its
own whitespace prefixing we fell short, before this change we'd emit:
$ git stash -h
usage: git stash list [<options>]
or: git stash show [<options>] [<stash>]
[...]
or: git stash [push [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [-m|--message <message>]
[...]
Now we'll properly emit aligned output. I.e. the last four lines
above will instead be (a whitespace-only change to the above):
[...]
or: git stash [push [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [-m|--message <message>]
[...]
We could also go for an approach where we have the caller support no
padding of their own, i.e. (same as the first example, except for the
padding on the second line):
N_("git stash [push [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet]\n"
"[-u|--include-untracked] [-a|--all] [-m|--message <message>]\n"
[...]
But to do that we'll need to find the length of "git stash". We can
discover that from the "cmd" in the "struct cmd_struct", but there
might be cases with sub-commands or "git" itself taking arguments that
would make that non-trivial.
Even if it were I still think this approach is better, because this way
we'll get the same legible alignment in the C code. The fact that
usage_with_options_internal() is adding its own prefix padding is an
implementation detail that callers shouldn't need to worry about.
Implementation notes:
We could skip the string_list_split() with a strchr(str, '\n') check,
but we'd then need to duplicate our state machine for strings that do
and don't contain a "\n". It's simpler to just always split into a
"struct string_list", even though the common case is that that "struct
string_list" will contain only one element. This is not
performance-sensitive code.
This change is relatively more complex since I've accounted for making
it future-proof for RTL translation support. Later in
usage_with_options_internal() we have some existing padding code
dating back to d7a38c54a6 (parse-options: be able to generate usages
automatically, 2007-10-15) which isn't RTL-safe, but that code would
be easy to fix. Let's not introduce new RTL translation problems here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the "Sending v2" section, readers are directed to create v2 patches
without using --range-diff. However, it is customary to include a
range-diff against the v1 patches as a reviewer aid.
Update the "Sending v2" section to suggest a simple workflow that uses
the --range-diff option. Also include some explanation for -v2 and
--range-diff to help the reader understand the importance.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a logic error in dfea575017 (Makefile: lazily compute header
dependencies, 2010-01-26) where we'd make whether we cleaned the
.depend dirs contingent on the currently configured
COMPUTE_HEADER_DEPENDENCIES value. Before this running e.g.:
make COMPUTE_HEADER_DEPENDENCIES=yes grep.o
make COMPUTE_HEADER_DEPENDENCIES=no clean
Would leave behind the .depend directory, now it'll be removed.
Normally we'd need to use another variable, but in this case there's
no other uses of $(dep_dirs), as opposed to $(dep_args) which is used
as an argument to $(CC). So just deleting this line makes everything
work correctly.
See http://lore.kernel.org/git/xmqqmto48ufz.fsf@gitster.g for a report
about this issue.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_TEST_INSTALLED was moved from perf-lib.sh to run in df0f5021
(perf-lib.sh: remove GIT_TEST_INSTALLED from perf-lib.sh, 2019-05-07)
and that included a change to how it inspected the existence of a
bin-wrappers directory. However, that included a typo that made the
match of bin-wrappers never work. Specifically, the assignment was
mydir_abs_wrappers="$mydir_abs_wrappers/bin-wrappers"
which uses the same variable before it is initialized. By changing it to
mydir_abs_wrappers="$mydir_abs/bin-wrappers"
We can correctly use the bin-wrappers directory.
This is critical to successfully computing performance of commands that
execute subcommands. The bin-wrappers ensure that the --exec-path is set
correctly.
Reported-by: Victoria Dye <vdye@github.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the bitfield added in 58300f4743 (sparse-index: add
index.sparse config option, 2021-03-30) and 3964fc2aae (sparse-index:
add guard to ensure full index, 2021-03-30) to just use an "int"
boolean instead.
It might be smart to optimize the space here in the future, but by
consistently using an "int" we can take its address and pass it to
repo_cfg_bool(), and therefore don't need to handle "sparse_index" as
a special-case when reading the "index.sparse" setting.
There's no corresponding config for "command_requires_full_index", but
let's change it too for consistency and to prevent future bugs
creeping in due to one of these being "unsigned".
Using "int" consistently also prevents subtle bugs or undesired
control flow creeping in here. Before the preceding commit the
initialization of "command_requires_full_index" in
prepare_repo_settings() did nothing, i.e. this:
r->settings.command_requires_full_index = 1
Was redundant to the earlier memset() to -1. Likewise for
"sparse_index" added in 58300f4743 (sparse-index: add index.sparse
config option, 2021-03-30) the code and comment added there was
misleading, we weren't initializing it to off, but re-initializing it
from "1" to "0", and then finally checking the config, and perhaps
setting it to "1" again. I.e. we could have applied this patch before
the preceding commit:
+ assert(r->settings.command_requires_full_index == 1);
r->settings.command_requires_full_index = 1;
/*
* Initialize this as off.
*/
+ assert(r->settings.sparse_index == 1);
r->settings.sparse_index = 0;
if (!repo_config_get_bool(r, "index.sparse", &value) && value)
r->settings.sparse_index = 1;
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the setup code in repo-settings.c in various ways, making the
code shorter, easier to read, and requiring fewer hacks to do the same
thing as it did before:
Since 7211b9e753 (repo-settings: consolidate some config settings,
2019-08-13) we have memset() the whole "settings" structure to -1 in
prepare_repo_settings(), and subsequently relied on the -1 value.
Most of the fields did not need to be initialized to -1, and because
we were doing that we had the enum labels "UNTRACKED_CACHE_UNSET" and
"FETCH_NEGOTIATION_UNSET" purely to reflect the resulting state
created this memset() in prepare_repo_settings(). No other code used
or relied on them, more on that below.
For the rest most of the subsequent "are we -1, then read xyz" can
simply be removed by re-arranging what we read first. E.g. when
setting the "index.version" setting we should have first read
"feature.experimental", so that it (and "feature.manyfiles") can
provide a default for our "index.version".
Instead the code setting it, added when "feature.manyFiles"[1] was
created, was using the UPDATE_DEFAULT_BOOL() macro added in an earlier
commit[2]. That macro is now gone, since it was only needed for this
pattern of reading things in the wrong order.
This also fixes an (admittedly obscure) logic error where we'd
conflate an explicit "-1" value in the config with our own earlier
memset() -1.
We can also remove the UPDATE_DEFAULT_BOOL() wrapper added in
[3]. Using it is redundant to simply using the return value from
repo_config_get_bool(), which is non-zero if the provided key exists
in the config.
Details on edge cases relating to the memset() to -1, continued from
"more on that below" above:
* UNTRACKED_CACHE_KEEP:
In [4] the "unset" and "keep" handling for core.untrackedCache was
consolidated. But it while we understand the "keep" value, we don't
handle it differently than the case of any other unknown value.
So let's retain UNTRACKED_CACHE_KEEP and remove the
UNTRACKED_CACHE_UNSET setting (which was always implicitly
UNTRACKED_CACHE_KEEP before). We don't need to inform any code
after prepare_repo_settings() that the setting was "unset", as far
as anyone else is concerned it's core.untrackedCache=keep. if
"core.untrackedcache" isn't present in the config.
* FETCH_NEGOTIATION_UNSET & FETCH_NEGOTIATION_NONE:
Since these two two enum fields added in [5] don't rely on the
memzero() setting them to "-1" anymore we don't have to provide
them with explicit values.
1. c6cc4c5afd (repo-settings: create feature.manyFiles setting,
2019-08-13)
2. 31b1de6a09 (commit-graph: turn on commit-graph by default,
2019-08-13)
3. 31b1de6a09 (commit-graph: turn on commit-graph by default,
2019-08-13)
4. ad0fb65999 (repo-settings: parse core.untrackedCache,
2019-08-13)
5. aaf633c2ad (repo-settings: create feature.experimental setting,
2019-08-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change tweak_untracked_cache() in "read-cache.c" to use a switch() to
have the compiler assert that we checked all possible values in the
"enum untracked_cache_setting" type, and likewise remove the "default"
case in fetch_negotiator_init() in favor of checking for
"FETCH_NEGOTIATION_UNSET" and "FETCH_NEGOTIATION_NONE".
As will be discussed in a subsequent we'll only ever have either of
these set to FETCH_NEGOTIATION_NONE, FETCH_NEGOTIATION_UNSET and
UNTRACKED_CACHE_UNSET within the prepare_repo_settings() function
itself. In preparation for fixing that code let's add a BUG() here to
mark this as unreachable code.
See ad0fb65999 (repo-settings: parse core.untrackedCache, 2019-08-13)
for when the "unset" and "keep" handling for core.untrackedCache was
consolidated, and aaf633c2ad (repo-settings: create
feature.experimental setting, 2019-08-13) for the addition of the
"default" pattern in "fetch-negotiator.c".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of the global ignore_untracked_cache_config variable added in
dae6c322fa (test-dump-untracked-cache: don't modify the untracked
cache, 2016-01-27) we can make use of the new facility to set config
via environment variables added in d8d77153ea (config: allow
specifying config entries via envvar pairs, 2021-01-12).
It's arguably a bit hacky to use setenv() and getenv() to pass
messages between the same program, but since the test helpers are not
the main intended audience of repo-settings.c I think it's better than
hardcoding the test-only special-case in prepare_repo_settings().
This uses the xsetenv() wrapper added in the preceding commit, if we
don't set these in the environment we'll fail in
t7063-status-untracked-cache.sh, but let's fail earlier anyway if that
were to happen.
This breaks any parent process that's potentially using the
GIT_CONFIG_* and GIT_CONFIG_PARAMETERS mechanism to pass one-shot
config setting down to a git subprocess, but in this case we don't
care about the general case of such potential parents. This process
neither spawns other "git" processes, nor is it interested in other
configuration. We might want to pick up other test modes here, but
those will be passed via GIT_TEST_* environment variables.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add fatal wrappers for setenv() and unsetenv(). In d7ac12b25d (Add
set_git_dir() function, 2007-08-01) we started checking its return
value, and since 48988c4d0c (set_git_dir: die when setenv() fails,
2018-03-30) we've had set_git_dir_1() die if we couldn't set it.
Let's provide a wrapper for both, this will be useful in many other
places, a subsequent patch will make another use of xsetenv().
The checking of the return value here is over-eager according to
setenv(3) and POSIX. It's documented as returning just -1 or 0, so
perhaps we should be checking -1 explicitly.
Let's just instead die on any non-zero, if our C library is so broken
as to return something else than -1 on error (and perhaps not set
errno?) the worst we'll do is die with a nonsensical errno value, but
we'll want to die in either case.
Let's make these return "void" instead of "int". As far as I can tell
there's no other x*() wrappers that needed to make the decision of
deviating from the signature in the C library, but since their return
value is only used to indicate errors (so we'd die here), we can catch
unreachable code such as
if (xsetenv(...) < 0)
[...];
I think it would be OK skip the NULL check of the "name" here for the
calls to die_errno(). Almost all of our setenv() callers are taking a
constant string hardcoded in the source as the first argument, and for
the rest we can probably assume they've done the NULL check
themselves. Even if they didn't, modern C libraries are forgiving
about it (e.g. glibc formatting it as "(null)"), on those that aren't,
well, we were about to die anyway. But let's include the check anyway
for good measure.
1. https://pubs.opengroup.org/onlinepubs/009604499/functions/setenv.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usage description for -X and -z options use descriptive instead of
imperative mood. Edit it for consistency with other options.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A rebase started with 'git rebase <A> <B>' is conceptually to first
checkout <B> and run 'git rebase <A>' starting from that state. 'git
rebase --abort' in the middle of such a rebase should take us back to
the state we checked out <B>.
This used to work, even when <B> is a tag that points at a commit,
until Git 2.20.0 when the command was reimplemented in C. The command
now complains that the tag object itself cannot be checked out, which
may be technically correct but is not what the user asked to do.
Fix this old regression by using lookup_commit_reference_by_name()
when parsing <B>. The scripted version did not need to peel the tag
because the commands it passed the tag to (e.g 'git reset') peeled the
tag themselves.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
peel_committish() appears to have been copied from the scripted rebase
but it duplicates the functionality of
lookup_commit_reference_by_name() so lets use that instead.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git uses −1 to signal an error. The builtin rebase converts these to
+1 all over the place using !! (presumably because the in the scripted
version an error was signalled by +1). This is confusing and clutters
the code, we only need to convert the value when the function returns.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our grep_buffer() function takes a non-const buffer, which is confusing:
we don't take ownership of nor write to the buffer.
This mostly comes from the fact that the underlying grep_source struct
in which we store the buffer uses non-const pointer. The memory pointed
to by the struct is sometimes owned by us (for FILE or OID sources), and
sometimes not (for BUF sources).
Let's store it as const, which lets us err on the side of caution (i.e.,
the compiler will warn us if any of our code writes to or tries to free
it).
As a result, we must annotate the one place where we do free it by
casting away the constness. But that's a small price to pay for the
extra safety and clarity elsewhere (and indeed, it already had a comment
explaining why GREP_SOURCE_BUF _didn't_ free it).
And then we can mark grep_buffer() as taking a const buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we're grepping in a buffer, we don't need to modify it. So we can
take "const char *" buffers, rather than "char *". This can avoid some
awkward casts in our callers, and make our expectations more clear (we
will not take ownership of the memory, nor will we ever write to it).
These spots don't all necessarily have to be converted at the same time,
but some of them are dependent on others, because we pass
pointers-to-pointers in a few cases. And none of this should change any
behavior, since we're just adding "const" qualifiers (and likewise, the
compiler will let us know if we missed any spots). So it's relatively
low-risk to just do this all at once.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We find the end of each matching line of a buffer, and then temporarily
write a NUL to turn it into a regular C string. But we don't need to do
so, because the only thing we do in the interim is pass the line and its
length (via an "eol" pointer) to match_line(). And that function should
only look at the bytes we passed it, whether it has a terminating NUL or
not.
We can drop this temporary write in order to simplify the code and make
it easier to use const buffers in more of grep.c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When showing lines via grep (or looking for funcnames), we call
show_line() on a multi-line buffer. It finds the end of line and marks
it with a NUL. However, we don't need to do so, as the resulting line is
only used along with its "eol" marker:
- we pass both to next_match(), which takes care to look at only the
bytes we specified
- we pass the line to output_color() without its matching eol marker.
However, we do use the "match" struct we got from next_match() to
tell it how many bytes to look at (which can never exceed the string
we passed it).
So we can stop setting and restoring this NUL marker. That makes the
code simpler, and will allow us to take a const buffer in a future
patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When grepping for headers in commit objects, we receive individual
lines (e.g., "author Name <email> 1234 -0000"), and then strip off the
timestamp to do our match. We do so by writing a NUL byte over the
whitespace separator, and then remembering to restore it later.
We had to do it this way when this was added back in a4d7d2c6db (log
--author/--committer: really match only with name part, 2008-09-04),
because we fed the result directly to regexec(), which expects a
NUL-terminated string. But since b7d36ffca0 (regex: use regexec_buf(),
2016-09-21), we have a function which can match part of a buffer.
So instead of modifying the string, we can instead just move the "eol"
pointer, and the rest of the code will do the right thing. This will let
further patches mark more buffers as "const".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar spirit as the previous patch, let sub-commands which
support showing or hiding a progress meter handle parsing the
`--progress` or `--no-progress` option, but do not expose it as an
option to the top-level `multi-pack-index` builtin.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "mode" word is useless in a call to open(2) that does not
create a new file. Such a call in the files backend of the ref
subsystem has been cleaned up.
* rs/no-mode-to-open-when-appending:
refs/files-backend: remove unused open mode parameter
The run-command API has been updated so that the callers can easily
ask the file descriptors open for packfiles to be closed immediately
before spawning commands that may trigger auto-gc.
* js/run-command-close-packs:
Close object store closer to spawning child processes
run_auto_maintenance(): implicitly close the object store
run-command: offer to close the object store before running
run-command: prettify the `RUN_COMMAND_*` flags
pull: release packs before fetching
commit-graph: when closing the graph, also release the slab
Various mergy operations have been prepared to work efficiently
with the sparse index.
* ds/mergies-with-sparse-index:
sparse-index: integrate with cherry-pick and rebase
sequencer: ensure full index if not ORT strategy
t1092: add cherry-pick, rebase tests
merge-ort: expand only for out-of-cone conflicts
merge: make sparse-aware with ORT
diff: ignore sparse paths in diffstat
In cone mode, the sparse-index code path learned to remove ignored
files (like build artifacts) outside the sparse cone, allowing the
entire directory outside the sparse cone to be removed, which is
especially useful when the sparse patterns change.
* ds/sparse-index-ignored-files:
sparse-checkout: clear tracked sparse dirs
sparse-index: add SPARSE_INDEX_MEMORY_ONLY flag
attr: be careful about sparse directories
sparse-checkout: create helper methods
sparse-index: use WRITE_TREE_MISSING_OK
sparse-index: silently return when cache tree fails
unpack-trees: fix nested sparse-dir search
sparse-index: silently return when not using cone-mode patterns
t7519: rewrite sparse index test
Build clean-up for "make tags" and friends.
* ab/make-tags-cleanup:
Makefile: normalize clobbering & xargs for tags targets
Makefile: remove "cscope.out", not "cscope*" in cscope.out target
Makefile: don't use "FORCE" for tags targets
Makefile: add QUIET_GEN to "cscope" target
Makefile: move ".PHONY: cscope" near its target
Code clean-up around "git serve".
* ab/serve-cleanup:
upload-pack: document and rename --advertise-refs
serve.[ch]: remove "serve_options", split up --advertise-refs code
{upload,receive}-pack tests: add --advertise-refs tests
serve.c: move version line to advertise_capabilities()
serve: move transfer.advertiseSID check into session_id_advertise()
serve.[ch]: don't pass "struct strvec *keys" to commands
serve: use designated initializers
transport: use designated initializers
transport: rename "fetch" in transport_vtable to "fetch_refs"
serve: mark has_capability() as static
More parts of "git submodule add" has been rewritten in C.
* ar/submodule-add-more:
submodule--helper: rename compute_submodule_clone_url()
submodule--helper: remove resolve-relative-url subcommand
submodule--helper: remove add-config subcommand
submodule--helper: remove add-clone subcommand
submodule--helper: convert the bulk of cmd_add() to C
dir: libify and export helper functions from clone.c
submodule--helper: remove repeated code in sync_submodule()
submodule--helper: refactor resolve_relative_url() helper
submodule--helper: add options for compute_submodule_clone_url()
The order in which various files that make up a single (conceptual)
packfile has been reevaluated and straightened up. This matters in
correctness, as an incomplete set of files must not be shown to a
running Git.
* tb/pack-finalize-ordering:
pack-objects: rename .idx files into place after .bitmap files
pack-write: split up finish_tmp_packfile() function
builtin/index-pack.c: move `.idx` files into place last
index-pack: refactor renaming in final()
builtin/repack.c: move `.idx` files into place last
pack-write.c: rename `.idx` files after `*.rev`
pack-write: refactor renaming in finish_tmp_packfile()
bulk-checkin.c: store checksum directly
pack.h: line-wrap the definition of finish_tmp_packfile()
Update the build procedure to use the "-pedantic" build when
DEVELOPER makefile macro is in effect.
* cb/pedantic-build-for-developers:
developer: enable pedantic by default
win32: allow building with pedantic mode enabled
gettext: remove optional non-standard parens in N_() definition
The code to show progress indicator in a few code paths did not
cover between 0-100%, which has been corrected.
* ab/progress-users-adjust-counters:
entry: show finer-grained counter in "Filtering content" progress line
commit-graph: fix bogus counter in "Scanning merged commits" progress line
"git diff --submodule=diff" showed failure from run_command() when
trying to run diff inside a submodule, when the user manually
removes the submodule directory.
* dt/submodule-diff-fixes:
diff --submodule=diff: don't print failure message twice
diff --submodule=diff: do not fail on ever-initialied deleted submodules
t4060: remove unused variable
Reduce number of write(2) system calls while sending the
ref advertisement.
* jv/pkt-line-batch:
upload-pack: use stdio in send_ref callbacks
pkt-line: add stdio packet write functions
"git maintenance" scheduler learned to use systemd timers as a
possible backend.
* lh/systemd-timers:
maintenance: add support for systemd timers on Linux
maintenance: `git maintenance run` learned `--scheduler=<scheduler>`
cache.h: Introduce a generic "xdg_config_home_for(…)" function
The tracing of process ancestry information has been enhanced.
* ab/tr2-leaks-and-fixes:
tr2: log N parent process names on Linux
tr2: do compiler enum check in trace2_collect_process_info()
tr2: leave the parent list empty upon failure & don't leak memory
tr2: stop leaking "thread_name" memory
tr2: clarify TRACE2_PROCESS_INFO_EXIT comment under Linux
tr2: remove NEEDSWORK comment for "non-procfs" implementations
The code to make "git grep" recurse into submodules has been
updated to migrate away from the "add submodule's object store as
an alternate object store" mechanism (which is suboptimal).
* jt/grep-wo-submodule-odb-as-alternate:
t7814: show lack of alternate ODB-adding
submodule-config: pass repo upon blob config read
grep: add repository to OID grep sources
grep: allocate subrepos on heap
grep: read submodule entry with explicit repo
grep: typesafe versions of grep_source_init
grep: use submodule-ODB-as-alternate lazy-addition
submodule: lazily add submodule ODBs as alternates
The reachability bitmap file used to be generated only for a single
pack, but now we've learned to generate bitmaps for history that
span across multiple packfiles.
* tb/multi-pack-bitmaps: (29 commits)
pack-bitmap: drop bitmap_index argument from try_partial_reuse()
pack-bitmap: drop repository argument from prepare_midx_bitmap_git()
p5326: perf tests for MIDX bitmaps
p5310: extract full and partial bitmap tests
midx: respect 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP'
t7700: update to work with MIDX bitmap test knob
t5319: don't write MIDX bitmaps in t5319
t5310: disable GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP
t0410: disable GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP
t5326: test multi-pack bitmap behavior
t/helper/test-read-midx.c: add --checksum mode
t5310: move some tests to lib-bitmap.sh
pack-bitmap: write multi-pack bitmaps
pack-bitmap: read multi-pack bitmaps
pack-bitmap.c: avoid redundant calls to try_partial_reuse
pack-bitmap.c: introduce 'bitmap_is_preferred_refname()'
pack-bitmap.c: introduce 'nth_bitmap_object_oid()'
pack-bitmap.c: introduce 'bitmap_num_objects()'
midx: avoid opening multiple MIDXs when writing
midx: close linked MIDXs, avoid leaking memory
...
Optimize code that handles large number of refs in the "git fetch"
code path.
* ps/fetch-optim:
fetch: avoid second connectivity check if we already have all objects
fetch: merge fetching and consuming refs
fetch: refactor fetch refs to be more extendable
fetch-pack: optimize loading of refs via commit graph
connected: refactor iterator to return next object ID directly
fetch: avoid unpacking headers in object existence check
fetch: speed up lookup of want refs via commit-graph
When cloning a repository with an unborn HEAD, we'll set the local HEAD
to match it only if the local repository is non-bare. This is
inconsistent with all other combinations:
remote HEAD | local repo | local HEAD
-----------------------------------------------
points to commit | non-bare | same as remote
points to commit | bare | same as remote
unborn | non-bare | same as remote
unborn | bare | local default
So I don't think this is some clever or subtle behavior, but just a bug
in 4f37d45706 (clone: respect remote unborn HEAD, 2021-02-05). And it's
easy to see how we ended up there. Before that commit, the code to set
up the HEAD for an empty repo was guarded by "if (!option_bare)". That's
because the only thing it did was call install_branch_config(), and we
don't want to do so for a bare repository (unborn HEAD or not).
That commit put the handling of unborn HEADs into the same block, since
those also need to call install_branch_config(). But the unborn case has
an additional side effect of calling create_symref(), and we want that
to happen whether we are bare or not.
This patch just pulls all of the "figure out the default branch" code
out of the "!option_bare" block. Only the actual config installation is
kept there.
Note that this does mean we might allocate "ref" and not use it (if the
remote is empty but did not advertise an unborn HEAD). But that's not
really a big deal since this isn't a hot code path, and it keeps the
code simple. The alternative would be handling unborn_head_target
separately, but that gets confusing since its memory ownership is
tangled up with the "ref" variable.
There's just one new test, for the case we're fixing. The other ones in
the table are handled elsewhere (the unborn non-bare case just above,
and the actually-born cases in t5601, t5606, and t5609, as they do not
require v2's "unborn" protocol extension).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/retire-option-argument:
parse-options API: remove OPTION_ARGUMENT feature
difftool: use run_command() API in run_file_diff()
difftool: prepare "diff" cmdline in cmd_difftool()
difftool: prepare "struct child_process" in cmd_difftool()
Not sure what happened, but the comment is describing code elsewhere in
the file. Fix the comment to actually discuss the code that follows.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 84e4484f12 (commit-graph: use parse_options_concat(), 2021-08-23) we
unified common options of commit-graph's subcommands into a single
"common_opts" array.
But 84e4484f12 introduced a behavior change which is to accept the
"--[no-]progress" option before any sub-commands, e.g.,
git commit-graph --progress write ...
Prior to that commit, the above would error out with "unknown option".
There are two issues with this behavior change. First is that the
top-level --[no-]progress is not always respected. This is because
isatty(2) is performed in the sub-commands, which unconditionally
overwrites any --[no-]progress that was given at the top-level.
But the second issue is that the existing sub-commands of commit-graph
only happen to both have a sensible interpretation of what `--progress`
or `--no-progress` means. If we ever added a sub-command which didn't
have a notion of progress, we would be forced to ignore the top-level
`--[no-]progress` altogether.
Since we haven't released a version of Git that supports --[no-]progress
as a top-level option for `git commit-graph`, let's remove it.
Suggested-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration option `rebase.forkpoint' is only mentioned in the man
page of git-config(1). Since it is a configuration for rebase, mention
it in the documentation of rebase at the --fork-point/--no-fork-point
section. This will help users set a preferred default for their
workflow.
Signed-off-by: Wesley Schwengle <wesley@opperschaap.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert test helper to use `start_bg_command()` when spawning a server
daemon in the background rather than blocks of platform-specific code.
Also, while here, remove _() translation around error messages since
this is a test helper and not Git code.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a variation of `run_command()` and `start_command()` to launch a command
into the background and optionally wait for it to become "ready" before returning.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set an ACL on the named pipe to allow the well-known group EVERYONE
to read and write to the IPC server's named pipe. In the event that
the daemon was started with elevation, allow non-elevated clients
to communicate with the daemon.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create "ipc-debug" category events to log unexpected errors
when creating Simple-IPC connections.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the declartion of the `enum ipc_active_state` type outside of
the SUPPORTS_SIMPLE_IPC ifdef.
A later commit will introduce the `fsmonitor_ipc__*()` API and stub in
a "mock" implementation that requires this enum in some function
signatures.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add `command_len` argument to the Simple IPC API.
In my original Simple IPC API, I assumed that the request would always
be a null-terminated string of text characters. The `command`
argument was just a `const char *`.
I found a caller that would like to pass a binary command to the
daemon, so I am amending the Simple IPC API to receive `const char
*command, size_t command_len` arguments.
I considered changing the `command` argument to be a `void *`, but the
IPC layer simply passes it to the pkt-line layer which takes a `const
char *`, so to avoid confusion I left it as is.
Note, the response side has always been a `struct strbuf` which
includes the buffer and length, so we already support returning a
binary answer. (Yes, it feels a little weird returning a binary
buffer in a `strbuf`, but it works.)
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create "child_ready" event to capture the state of a child process
created in the background.
When a child command is started a "child_start" event is generated in
the Trace2 log. For normal synchronous children, a "child_exit" event
is later generated when the child exits or is terminated. The two events
include information, such as the "child_id" and "pid", to allow post
analysis to match-up the command line and exit status.
When a child is started in the background (and may outlive the parent
process), it is not possible for the parent to emit a "child_exit"
event. Create a new "child_ready" event to indicate whether the
child was successfully started. Also include the "child_id" and "pid"
to allow similar post processing.
This will be used in a later commit with the new "start_bg_command()".
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we both can propagate values from the hashcache, and respect
the configuration to enable the hashcache at all, test that both of
these function correctly by hardening their behavior with a test.
Like the hash-cache in classic single-pack bitmaps, this helps more
proportionally the more up-to-date your bitmap coverage is. When our
bitmap coverage is out-of-date with the ref tips, we spend more time
proportionally traversing, and all of that traversal gets the name-hash
filled in.
But for the up-to-date bitmaps, this helps quite a bit. These numbers
are on git.git, with `pack.threads=1` to help see the difference
reflected in the overall runtime.
Test origin/tb/multi-pack-bitmaps HEAD
-------------------------------------------------------------------------------------
5326.4: simulated clone 1.87(1.80+0.07) 1.46(1.42+0.03) -21.9%
5326.5: simulated fetch 2.66(2.61+0.04) 1.47(1.43+0.04) -44.7%
5326.6: pack to file (bitmap) 2.74(2.62+0.12) 1.89(1.82+0.07) -31.0%
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To help test the performance of permuting the contents of the hash-cache
when generating a MIDX bitmap, we need a bitmap which has its hash-cache
populated.
And since multi-pack bitmaps don't add *new* values to the hash-cache,
we have to rely on a single-pack bitmap to generate those values for us.
Therefore, generate a pack bitmap before the MIDX one in order to ensure
that the MIDX bitmap has entries in its hash-cache. Since we don't want
to time generating the pack bitmap, move that to a non-perf test run
before we try to generate the MIDX bitmap.
Likewise, get rid of the pack bitmap afterwords, to make certain that we
are not accidentally using it in the performance tests run later on.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a few typos and alignment issues, and while at it update the
example hashes to show most of the ones available in recent crypt(3).
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of crypt(3) will return NULL when passed an unsupported
hash type (ex: OpenBSD with DES), so check for undef instead of using
it directly.
Also use this to probe the system and select a better hash function in
the tests, so it can pass successfully.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
[jc: <CAPUEspjqD5zy8TLuFA96usU7FYi=0wF84y7NgOVFqegtxL9zbw@mail.gmail.com>]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c057bad370 (git-cvsserver: use a password file cvsserver pserver,
2010-05-15) adds a way for `git cvsserver` to provide authenticated
pserver accounts without having clear text passwords, but uses the
username instead of the password to the call for crypt(3).
Correct that, and make sure the documentation correctly indicates how
to obtain hashed passwords that could be used to populate this
configuration, as well as correcting the hash that was used for the
tests.
This change will require that any user of this feature updates the
hashes in their configuration, but has the advantage of using a more
similar format than cvs uses, probably also easying any migration.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9af0b8dbe2 (t0000-basic: more commit-tree tests., 2006-04-26) adds
tests for commit-tree that mask the return exit from git as described
in a378fee5b0 (Documentation: add shell guidelines, 2018-10-05).
Fix the tests, to avoid pipes by using a temporary file instead.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b8ba412bf7 (tree-diff: avoid alloca for large allocations, 2016-06-07)
adds a way to route some bigger allocations out of the stack and free
them through the addition of two conveniently named macros, but leaves
the calls to free the xalloca part, which could be also in the heap,
if the system doesn't HAVE_ALLOCA_H (ex: macOS and other BSD).
Add the missing free call, xalloca_free(), which is a noop if we
allocated memory in the stack frame, but a real free() if we
allocated in the heap instead, and while at it, change the expression
to match in both macros for ease of readability.
This avoids a leak reported by LSAN while running t0000 but that
wouldn't fail the test (which is fixed in the next patch):
SUMMARY: LeakSanitizer: 1034 byte(s) leaked in 15 allocation(s).
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Time complexities for pack_pos_to_midx and midx_to_pack_pos are swapped,
correct it.
Signed-off-by: Kyle Zhao <kylezhao@tencent.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code that optionally creates the *.rev reverse index file has
been optimized to avoid needless computation when it is not writing
the file out.
* ab/reverse-midx-optim:
pack-write: skip *.rev work when not writing *.rev
"make INSTALL_STRIP=-s install" allows the installation step to use
"install -s" to strip the binaries as they get installed.
* bs/install-strip:
make: add INSTALL_STRIP option variable
Teach "test_pause" and "debug" helpers to allow using the HOME and
TERM environment variables the user usually uses.
* pb/test-use-user-env:
test-lib-functions: keep user's debugger config files and TERM in 'debug'
test-lib-functions: optionally keep HOME, TERM and SHELL in 'test_pause'
test-lib-functions: use 'TEST_SHELL_PATH' in 'test_pause'
The "git apply -3" code path learned not to bother the lower level
merge machinery when the three-way merge can be trivially resolved
without the content level merge.
* jc/trivial-threeway-binary-merge:
apply: resolve trivial merge without hitting ll-merge with "--3way"
t1400.190 sometimes fails or even hangs because of the way it uses
fifos. Our goal is to interactively read and write lines from
update-ref, so we have two fifos, in and out. We open a descriptor
connected to "in" and redirect output to that, so that update-ref does
not see EOF as it would if we opened and closed it for each "echo" call.
But we don't do the same for the output. This leads to a race where our
"read response <out" has not yet opened the fifo, but update-ref tries
to write to it and gets SIGPIPE. This can result in the test failing, or
worse, hanging as we wait forever for somebody to write to the pipe.
This is the same proble we fixed in 4783e7ea83 (t0008: avoid SIGPIPE
race condition on fifo, 2013-07-12), and we can fix it the same way, by
opening a second long-running descriptor.
Before this patch, running:
./t1400-update-ref.sh --run=1,190 --stress
failed or hung within a few dozen iterations. After it, I ran it for
several hundred without problems.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently store each submodule gitdir in ".git/modules/<name>", but
this has problems with some submodule naming schemes, as described in a
comment in submodule_name_to_gitdir() in this patch.
Extract the determination of the location of a submodule's gitdir into
its own function submodule_name_to_gitdir(). For now, the problem
remains unsolved, but this puts us in a better position for finding a
solution.
This was motivated, at $DAYJOB, by a part of Android's repo hierarchy
[1]. In particular, there is a repo "build", and several repos of the
form "build/<name>".
This is based on earlier work by Brandon Williams [2].
[1] https://android.googlesource.com/platform/
[2] https://lore.kernel.org/git/20180808223323.79989-2-bmwill@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The v2 ls-refs command may receive extra arguments from the client, one
per pkt-line. The spec is pretty clear that the arguments must come from
a specified set, but we silently ignore any unknown entries. For a
well-behaved client this doesn't matter, but it makes testing and
debugging more confusing. Let's tighten this up to match the spec.
In theory this liberal behavior _could_ be useful for extending the
protocol. But:
- every other part of the protocol requires that the server first
indicate that it supports the argument; this includes the fetch and
object-info commands, plus the "unborn" capability added to ls-refs
itself
- it's not a very good extension mechanism anyway; without the server
advertising support, clients would have no idea if the argument was
silently ignored, or accepted and simply had no effect
So we're not really losing anything by tightening this.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our table of v2 "capabilities" contains everything we might tell the
client we support. But there are differences in how we expect the client
to respond. Some of the entries are true capabilities (i.e., we expect
the client to say "yes, I support this"), and some are ones we expect
them to send as commands (with "command=ls-refs" or similar).
When we receive a capability used as a command, we complain about that.
But when we receive a command used as a capability (e.g., just "ls-refs"
in a pkt-line by itself), we silently ignore it.
This isn't really hurting anything (clients shouldn't send it, and we'll
ignore it), but we can tighten up the protocol to match what we expect
to happen.
There are two new tests here. The first one checks a capability used as
a command, which already passes. The second tests a command as a
capability, which this patch fixes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we see a line from the client like "command=ls-refs", we parse
everything after the equals sign as a capability, which we check against
our capabilities table. If we don't recognize the command (e.g.,
"command=foo"), we'll reject it.
But in parse_command(), we use the same get_capability() parser for
parsing non-command lines. So if we see "command=ls-refs=foo", we will
feed "ls-refs=foo" to get_capability(), which will say "OK, that's
ls-refs, with value 'foo'". But then we simply ignore the value
entirely.
The client is violating the spec here, which says:
command = PKT-LINE("command=" key LF)
key = 1*(ALPHA | DIGIT | "-_")
I.e., the key is not even allowed to have an equals sign in it. Whereas
a real non-command capability does allow a value:
capability = PKT-LINE(key[=value] LF)
So by reusing the same get_capability() parser, we are mixing up the
"key" and "capability" tokens. However, since that parser tells us
whether it saw an "=", we can still use it; we just need to reject any
input that produces a non-NULL value field.
The current behavior isn't really hurting anything (the client should
never send such a request, and if it does, we just ignore the "value"
part). But since it does violate the spec, let's tighten it up to
prevent any surprising behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We've never documented the fact that a client can provide multiple
ref-prefix capabilities. Let's describe the behavior.
We also never discussed the "best effort" nature of the prefixes. The
client side of git.git has always treated them this way, filtering the
result with local patterns. And indeed any client must do this, because
the prefix patterns are not sufficient to express the usual refspecs
(and so for "foo" we ask for "refs/heads/foo", "refs/tags/foo", and so
on).
So this may be considered a change in the spec with respect to client
expectations / requirements, but it's mostly codifying existing
behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because each "ref-prefix" capability from the client comes in its own
pkt-line, there's no limit to the number of them that a misbehaving
client may send. We read them all into a strvec, which means the client
can waste arbitrary amounts of our memory by just sending us "ref-prefix
foo" over and over.
One possible solution is to just drop the connection when the limit is
reached. If we set it high enough, then only misbehaving or malicious
clients would hit it. But "high enough" is vague, and it's unfriendly if
we guess wrong and a legitimate client hits this.
But we can do better. Since supporting the ref-prefix capability is
optional anyway, the client has to further cull the response based on
their own patterns. So we can simply ignore the patterns once we cross a
certain threshold. Note that we have to ignore _all_ patterns, not just
the ones past our limit (since otherwise we'd send too little data).
The limit here is fairly arbitrary, and probably much higher than anyone
would need in practice. It might be worth limiting it further, if only
because we check it linearly (so with "m" local refs and "n" patterns,
we do "m * n" string comparisons). But if we care about optimizing this,
an even better solution may be a more advanced data structure anyway.
I didn't bother making the limit configurable, since it's so high and
since Git should behave correctly in either case. It wouldn't be too
hard to do, but it makes both the code and documentation more complex.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We collect the set of capabilities the client sends us in a strvec.
While this is usually small, there's no limit to the number of
capabilities the client can send us (e.g., they could just send us
"agent" pkt-lines over and over, and we'd keep adding them to the list).
Since all code has been converted away from using this list, let's get
rid of it. This avoids a potential attack where clients waste our
memory.
Note that we do have to replace it with a flag, because some of the
flush-packet logic checks whether we've seen any valid commands or keys.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than pulling the session-id string from the list of collected
capabilities, we can handle it as soon as we receive it. This gets us
closer to dropping the collected list entirely.
The behavior should be the same, with one exception. Previously if the
client sent us multiple session-id lines, we'd report only the first.
Now we'll pass each one along to trace2. This shouldn't matter in
practice, since clients shouldn't do that (and if they do, it's probably
sensible to log them all).
As this removes the last caller of the static has_capability(), we can
remove it, as well (and in fact we must to avoid -Wunused-function
complaining).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We get any "object-format" specified by the client by searching for it
in the collected list of capabilities the client sent. We can instead
just handle it as soon as they send it. This is slightly more efficient,
and gets us one step closer to dropping that collected list.
Note that we do still have to do our final hash check after receiving
all capabilities (because they might not have sent an object-format line
at all, and we still have to check that the default matches our
repository algorithm). Since the check_algorithm() function would now be
down to a single if() statement, I've just inlined it in its only
caller.
There should be no change of behavior here, except for two
broken-protocol cases:
- if the client sends multiple conflicting object-format capabilities
(which they should not), we'll now choose the last one rather than
the first. We could also detect and complain about the duplicates
quite easily now, which we could not before, but I didn't do so
here.
- if the client sends a bogus "object-format" with no equals sign,
we'll now say so, rather than "unknown object format: ''"
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When this performance test was originally written, `core.multiPackIndex`
was not the default and thus had to be enabled. But now that we have
18e449f86b (midx: enable core.multiPackIndex by default, 2020-09-25), we
no longer need this.
Drop the unnecessary setup (even though it's not hurting anything, it is
unnecessary at best and confusing at worst).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the tests in test_full_bitmap rely on having a tag named
perf-tag in place. We could create it in test_full_bitmap(), but we want
to have it in place before the repack starts.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, the bitmap writing code learned to propagate
values from an existing hash-cache extension into the bitmap that it is
writing.
Now that that functionality exists, let's expose it by teaching the 'git
multi-pack-index' builtin to respect the `pack.writeBitmapHashCache`
option so that the hash-cache may be written at all.
Two minor points worth noting here:
- The 'git multi-pack-index write' sub-command didn't previously read
any configuration (instead this is handled in the base command). A
separate handler is added here to respect this write-specific
config option.
- I briefly considered adding a 'bitmap_flags' field to the static
options struct, but decided against it since it would require
plumbing through a new parameter to the write_midx_file() function.
Instead, a new MIDX-specific flag is added, which is translated to
the corresponding bitmap one.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an old bitmap exists while writing a new one, we load it and build
a "reposition" table which maps bit positions of objects from the old
bitmap to their respective positions in the new bitmap. This can help
when we encounter a commit which was selected in both the old and new
bitmap, since we only need to permute its bit (not recompute it from
scratch).
We do not, however, repurpose existing namehash values in the case of
the hash-cache extension. There has been thus far no good reason to do
so, since all of the namehash values for objects in the new bitmap would
be populated during the traversal that was just performed by
pack-objects when generating single-pack reachability bitmaps.
But this isn't the case for multi-pack bitmaps, which are written via
`git multi-pack-index write --bitmap` and do not perform any traversal.
In this case all namehash values are set to zero, but we don't even
bother to check the `pack.writeBitmapHashcache` option anyway, so it
fails to matter.
There are two approaches we could take to fill in non-zero hash-cache
values:
- have either the multi-pack-index builtin run its own
traversal to attempt to fill in some values, or let a hypothetical
caller (like `pack-objects` when `repack` eventually drives the
`multi-pack-index` builtin) fill in the values they found during
their traversal
- or copy any existing namehash values that were stored in an
existing bitmap to their corresponding positions in the new bitmap
In a system where a repository is generally repacked with `git repack
--geometric=<d>` and occasionally repacked with `git repack -a`, the
hash-cache coverage will tend towards all objects.
Since populating the hash-cache is additive (i.e., doing so only helps
our delta search), any intermediate lack of full coverage is just fine.
So let's start by just propagating any values from the existing
hash-cache if we see one.
The next patch will respect the `pack.writeBitmapHashcache` option while
writing MIDX bitmaps, and then test this new behavior.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pack-bitmap writer code is about to learn how to propagate values
from an existing hash-cache. To prepare, teach the test-bitmap helper to
dump the values from a bitmap's hash-cache extension in order to test
those changes.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a capabilities table that tells us what we should tell the
client we are capable of, and what to do when a client gives us a
particular command (e.g., "command=ls-refs"). But it doesn't tell us
what to do when the client sends us back a capability (e.g.,
"object-format=sha256"). We just collect them all in a strvec and hope
somebody can use them later.
Instead, let's provide a function pointer in the table to act on these.
This will eventually help us avoid collecting the strings, which will be
more efficient and less prone to mischief.
Using the new method is optional, which helps in two ways:
- we can move existing capabilities over to this new system gradually
in individual commits
- some capabilities we don't actually do anything with anyway. For
example, the client is free to say "agent=git/1.2.3" to us, but we
do not act on the information in any way.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the client sends v2 capabilities, they may be simple, like:
foo
or have a value like:
foo=bar
(all of the current capabilities actually expect a value, but the
protocol allows for boolean ones).
We use get_capability() to make sure the client's pktline matches a
capability. In doing so, we parse enough to see the "=" and the value
(if any), but we immediately forget it. Nobody cares for now, because they end
up parsing the values out later using has_capability(). But in
preparation for changing that, let's pass back a pointer so the callers
know what we found.
Note that unlike has_capability(), we'll return NULL for a "simple"
capability. Distinguishing these will be useful for some future patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The is_command() function not only tells us whether the pktline is a
valid command string, but it also parses out the command (and complains
if we see a duplicate). Let's rename it to make those extra functions
a bit more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/serve-cleanup:
upload-pack: document and rename --advertise-refs
serve.[ch]: remove "serve_options", split up --advertise-refs code
{upload,receive}-pack tests: add --advertise-refs tests
serve.c: move version line to advertise_capabilities()
serve: move transfer.advertiseSID check into session_id_advertise()
serve.[ch]: don't pass "struct strvec *keys" to commands
serve: use designated initializers
transport: use designated initializers
transport: rename "fetch" in transport_vtable to "fetch_refs"
serve: mark has_capability() as static
While 'git version' is probably the least complex git command,
it is a non-experimental user-facing builtin command. As such
it should have a help page.
Both `git help` and `git version` can be called as options
(`--help`/`--version`) that internally get converted to the
corresponding command. Add a small paragraph to
Documentation/git.txt describing how these two options
interact with each other and link to this help page for the
sub-options that `--version` can take. Well, currently there
is only one sub-option, but that could potentially increase
in future versions of Git.
Signed-off-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check that git.html exists, regardless of the page the user wants to open.
Checking whether the requested page exists instead gives us a smoother user
experience in two use cases:
1) The requested page doesn't exist
When calling a git command and there is an error, most users reasonably expect
git to produce an error message on the standard error stream, but in this case
we pass the filepath to git web--browse which passes it on to a browser (or a
helper program like xdg-open or start that should in turn open a browser)
without any error and many GUI based browsers or helpers won't output such a
message onto the standard error stream.
Especially the helper programs tend to show the corresponding error message in
a message box and wait for user input before exiting. This leaves users in
interactive console sessions without an error message in their console,
without a console prompt and without the help page they expected.
2) git.html is missing for some reason, but the user asked for some other page
We currently refuse to show any local html help page when we can't find
git.html. Even if the requested help page exists. If we check for the requested
page instead, we can show the user all available pages and only error out on
those that don't exist.
Signed-off-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Available since Windows 10 release 1803 and Windows Server 2019.
NO_UNIX_SOCKETS is still the default for Windows builds, as they need
to keep backward compatibility with releases up to Windows 7, but allow
including the header otherwise.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Connect and reset errors aren't what will be expected by POSIX but
are instead compatible with the ones used by WinSock.
To avoid any possibility of confusion with other systems, checks
for disconnection and availability had been abstracted into helper
functions that are platform specific.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for a future patch that will allow building with
Unix Sockets in Windows, workaround a couple of issues from the
Mingw-W64 compatibility layer.
test -S is not able to detect that a file is a socket, so use
test -e instead (through a library function).
`mkdir -m` can't represent a valid ACL directly and fails with
permission problems, so instead call mkdir followed by chmod, which
has been enhanced to do so.
The last invocation of mkdir would likely need the same treatment
but SYMLINK is unlikely to be enabled on Windows so it has been
punted for now.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git help` command gained the ability to list config variables in
3ac68a93fd (help: add --config to list all available config, 2018-05-26)
but failed to tell readers of the config documenation itself.
Provide that cross reference.
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After reimplementation of `git bisect run` in C,
`--bisect-next-check` subcommand is not needed anymore.
Let's remove it from options list and code.
Mentored by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement the `bisect_run()` shell function
in C and also add `--bisect-run` subcommand to
`git bisect--helper` to call it from git-bisect.sh.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement the `bisect_visualize()` shell function
in C and also add `--bisect-visualize` subcommand to
`git bisect--helper` to call it from git-bisect.sh.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `static` keyword from `exists_in_PATH()` function
and declare the function in `run-command.h` file.
The function will be used in bisect_visualize() in a later
commit.
Mentored by: Christian Couder <chriscool@tuxfamily.org>
Mentored by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test to control breakages in bisect visualize command.
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a gap on bisect run test coverage related with error exits.
Add two tests to control these error cases.
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9512177b68 ("rebase: add --quit to cleanup rebase, leave everything
else untouched", 2016-11-12) seems to have copied the --abort tests
but added two separate tests for the two rebase backends rather than
adding a single test into the existing testrebase() function.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing tests only check that HEAD points to the correct
commit after aborting, they do not check that the original branch
is checked out.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the end of the test we expect the state directory to be missing,
but the tests only check it is not a directory.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$dotest holds the name of the rebase state directory and was named
after the state directory used at the time the test was added. As we
no longer use that name rename the variable to reflect its purpose.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the setup by using test_commit. Note that this replaces the
branch "pre-rebase" with a tag of the same name. "pre-rebase" is only
used as a fixed reference point so it makes sense to use a tag rather
than a branch.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 97b88dd58c ("git-rebase.sh: Fix --merge --abort failures when
path contains whitespace", 2008-05-04) started running these tests in
a subdirectory with a space in its name. At that time $TEST_DIRECTORY
did not contain a space but shortly after in 4a7aaccd83 ("Rename the
test trash directory to contain spaces.", 2008-05-04) $TEST_DIRECTORY
was changed to contain a space so we no longer need to run these tests
in a subdirectory.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new git-curl-compat.h header to define CURL_SOCKOPT_OK to its
known value if we're on an older curl version that doesn't have it. It
was hardcoded in http.c in a15d069a19 (http: enable keepalive on TCP
sockets, 2013-10-12).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As discussed in 644de29e22 (http: drop support for curl < 7.19.4,
2021-07-30) checking against LIBCURL_VERSION_NUM isn't as reliable as
checking specific symbols present in curl, as some distros have been
known to backport features.
However, while some of the curl_easy_setopt() arguments we rely on are
macros, others are enum, and we can't assume that those that are
macros won't change into enums in the future.
So we're still going to have to check LIBCURL_VERSION_NUM, but by
doing that in one central place and using a macro definition of our
own, anyone who's backporting features can define it themselves, and
thus have access to more modern curl features that they backported,
even if they didn't bump the LIBCURL_VERSION_NUM.
More importantly, as shown in a preceding commit doing these version
checks makes for hard to read and possibly buggy code, as shown by the
bug fixed there where we were conflating base 10 for base 16 when
comparing the version.
By doing them all in one place we'll hopefully reduce the chances of
such future mistakes, furthermore it now becomes easier to see at a
glance what the oldest supported version is, which makes it easier to
reason about any future deprecation similar to the recent
e48a623dea (Merge branch 'ab/http-drop-old-curl', 2021-08-24).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In aeff8a6121 (http: implement public key pinning, 2016-02-15) a
dependency and warning() was added if curl older than 7.44.0 was used,
but the relevant code depended on CURLOPT_PINNEDPUBLICKEY, introduced
in 7.39.0.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In d73019feb4 (http: add support selecting http version, 2018-11-08)
a dependency was added on CURL_HTTP_VERSION_2, but this feature was
introduced in curl version 7.43.0, not 7.47.0, as the incorrect
version check led us to believe.
As looking through the history of that commit on the mailing list will
reveal[1], the reason for this is that an earlier version of it
depended on CURL_HTTP_VERSION_2TLS, which was introduced in libcurl
7.47.0.
But the version that made it in in d73019feb4 had dropped the
dependency on CURL_HTTP_VERSION_2TLS, but the corresponding version
check was not corrected.
The newest symbol we depend on is CURL_HTTP_VERSION_2. It was added in
7.33.0, but the CURL_HTTP_VERSION_2 alias we used was added in
7.47.0. So we could support an even older version here, but let's just
correct the checked version.
1. https://lore.kernel.org/git/pull.69.git.gitgitgadget@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 644de29e22 (http: drop support for curl < 7.19.4, 2021-07-30) we
dropped support for curl < 7.19.4, so we can drop support for this
non-obvious dependency on curl < 7.18.0.
It's non-obvious because in curl's hex version notation 0x071800 is
version 7.24.0, *not* 7.18.0, so at a glance this patch looks
incorrect.
But it's correct, because the existing version check being removed
here is wrong. The check guards use of the following curl defines:
CURLPROXY_SOCKS4 7.10
CURLPROXY_SOCKS4A 7.18.0
CURLPROXY_SOCKS5 7.10
CURLPROXY_SOCKS5_HOSTNAME 7.18.0
I.e. the oldest version that has these is in fact 7.18.0, not
7.24.0. That we were checking 7.24.0 is just an mistake in
6d7afe07f2 (remote-http(s): support SOCKS proxies, 2015-10-26),
i.e. its author confusing base 10 and base 16.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 1119a15b5c (http: drop support for curl < 7.11.1, 2021-07-30)
support for curl versions older than 7.11.1 was removed, and we
currently require at least version 7.19.4, see 644de29e22 (http: drop
support for curl < 7.19.4, 2021-07-30).
In those changes this Makefile-specific check added in
0890098780 (Decide whether to build http-push in the Makefile,
2005-11-18) was missed, now that we're never going to use such an
ancient curl version we don't need to check that we have at least
7.9.8 here. I have no idea what in http-push.c broke on versions older
than that.
This does not impact "NO_CURL" setups, as this is in the "else" branch
after that check.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without NO_CURL=Y we require at least version "7.19.4" of libcurl, see
644de29e22 (http: drop support for curl < 7.19.4, 2021-07-30). Let's
document this in the "INSTALL" document.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As was noted in 1a85b49b87 (parse-options: make OPT_ARGUMENT() more
useful, 2019-03-14) there's only ever been one user of the
OPT_ARGUMENT(), that user was added in 20de316e33 (difftool: allow
running outside Git worktrees with --no-index, 2019-03-14).
The OPT_ARGUMENT() feature itself was added way back in
580d5bffde (parse-options: new option type to treat an option-like
parameter as an argument., 2008-03-02), but as discussed in
1a85b49b87 wasn't used until 20de316e33 in 2019.
Now that the preceding commit has migrated this code over to using
"struct strvec" to manage the "args" member of a "struct
child_process", we can just use that directly instead of relying on
OPT_ARGUMENT.
This has a minor change in behavior in that if we'll pass --no-index
we'll now always pass it as the first argument, before we'd pass it in
whatever position the caller did. Preserving this was the real value
of OPT_ARGUMENT(), but as it turns out we didn't need that either. We
can always inject it as the first argument, the other end will parse
it just the same.
Note that we cannot remove the "out" and "cpidx" members of "struct
parse_opt_ctx_t" added in 580d5bffde, while they were introduced with
OPT_ARGUMENT() we since used them for other things.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the run_file_diff() function to use the run_command() API
directly, instead of invoking the run_command_v_opt_cd_env() wrapper.
This allows it, like run_dir_diff(), to use the "args" from "struct
strvec", instead of the "const char **argv" passed into
cmd_difftool(). This will be used in the subsequent commit to get rid
of OPT_ARGUMENT() from cmd_difftool().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We call into either run_dir_diff() or run_file_diff(), each of which
sets up a child argv starting with "diff" and some hard-coded options
(depending on which mode we're using). Let's extract that logic into the
caller, which will make it easier to modify the options for cases which
affect both functions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the preparation of the "struct child_process" from run_dir_diff()
to its only caller, cmd_difftool(). This is in preparation for
migrating run_file_diff() to using the run_command() API directly, and
to move more of the shared setup of the two to cmd_difftool().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for the "usagestr" passed to parse-options.c
usage_with_options_internal() through cmd_parseopt().
These test for edge cases in the existing behavior related to the
"--parseopt" interface doing its own line-splitting with
strbuf_getline(), and the native C interface expecting and potentially
needing to handle newlines within the strings in the array it
accepts. The results are probably something that wasn't anticipated,
but let's make sure we stay backwards compatible with it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "send-pack" was changed to use the parse_options() API in
068c77a518 (builtin/send-pack.c: use parse_options API, 2015-08-19)
it was made to use one very long line, instead it should split them up
with newlines.
Furthermore we were including an inline explanation that you couldn't
combine "--all" and "<ref>", but unlike in the "blame" case this was
not preceded by an empty string.
Let's instead show that --all and <ref> can't be combined in the the
usual language of the usage syntax instead. We can make it clear that
one of the two options "--foo" and "--bar" is mandatory, but that the
two are mutually exclusive by referring to them as "( --foo | --bar
)".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for having continued usage lines properly aligned in
"git <cmd> -h" output, let's have the "[" on the second such lines
align with the "[" on the first line.
In some cases this makes the output worse, because e.g. the "git
ls-remote -h" output had been aligned to account for the extra
whitespace that the usage_with_options_internal() function in
parse-options.c would add.
In other cases such as builtin/stash.c (not changed here), we were
aligned in the C strings, but since that didn't account for the extra
padding in usage_with_options_internal() it would come out looking
misaligned, e.g. code like this:
N_("git stash [push [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet]\n"
" [-u|--include-untracked] [-a|--all] [-m|--message <message>]\n"
Would emit:
or: git stash [push [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [-m|--message <message>]
Let's change all the usage arrays which use such continued usage
output via "\n"-embedding to be like builtin/stash.c.
This makes the output worse temporarily, but in a subsequent change
I'll improve the usage_with_options_internal() to take this into
account, at which point all of the strings being changed here will
emit prettier output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the launchctl_boot_plist() function was added in
a16eb6b1ff (maintenance: skip bootout/bootstrap when plist is
registered, 2021-08-24), an unused call to launchctl_get_uid() was
added along with it. That call appears to have been copy/pasted from
launchctl_boot_plist().
Since we can remove that, we can also get rid of the "result"
variable, whose only purpose was allow for the free() between its
assignment and the return. That pattern also appears to have been
copy/pasted from launchctl_boot_plist().
As the patch shows the returned value from launchctl_get_uid() wasn't
used at all in this function. The launchctl_get_uid() function itself
just calls xstrfmt() and getuid(), neither of which have any subtle
global side-effects, so this removal is safe.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In be5d88e112 (test-tool run-command: learn to run (parts of) the
testsuite, 2019-10-04) an init pattern was added that would use
TESTSUITE_INIT, but then promptly memset() everything back to 0. We'd
then set the "dup" on the two string lists.
Our setting of "next" to "-1" thus did nothing, we'd reset it to "0"
before using it. Let's set it to "0" instead, and trust the
"STRING_LIST_INIT_DUP" to set "strdup_strings" appropriately for us.
Note that while we compile this code, there's no in-tree user for the
"testsuite" target being modified here anymore, see the discussion at
and around <nycvar.QRO.7.76.6.2109091323150.59@tvgsbejvaqbjf.bet>[1].
1. https://lore.kernel.org/git/nycvar.QRO.7.76.6.2109091323150.59@tvgsbejvaqbjf.bet/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove untracked files that are unwanted after they are done being used.
While the set of cases in this patch is certainly far from
comprehensive, it was motivated by some work to see what the fallout
would be if we were to make the removal of untracked files as a side
effect of other commands into an error. Some cases were a bit more
involved than the testcase changes included in this patch, but the ones
included here represent the simple cases. While this patch is not that
important since we are not changing the behavior of those other commands
into an error in the near term, I thought these changes were useful
anyway as an explicit documentation of the intent that these untracked
files are no longer useful.
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Acked-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We converted argv_array (which later became strvec) to use size_t in
819f0e76b1 (argv-array: use size_t for count and alloc, 2020-07-28) in
order to avoid the possibility of integer overflow. But later, commit
d70a9eb611 (strvec: rename struct fields, 2020-07-28) accidentally
converted these back to ints!
Those two commits were part of the same patch series. I'm pretty sure
what happened is that they were originally written in the opposite order
and then cleaned up and re-ordered during an interactive rebase. And
when resolving the inevitable conflict, I mistakenly took the "rename"
patch completely, accidentally dropping the type change.
We can correct it now; better late than never.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 8de7eeb54b (compression: unify pack.compression configuration
parsing, 2016-11-15) the variables core_compression_level and
core_compression_seen are only set, but never read. Remove them.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two have fallen out of use with the SHA-256 migration.
The last use of $_x40 was removed in fc7e73d7ef (t4013: improve
diff-post-processor logic, 2020-08-21) and
The last use of $_z40 was removed in 7a868c51c2 (t5562: use $ZERO_OID,
2019-12-21), but it was then needlessly refactored to be hash-agnostic
in 192b517589 (t: use hash-specific lookup tables to define test
constants, 2020-02-22). We can just remove it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable was last used in code removed in
06f5608c14 (bisect--helper: `bisect_start` shell function partially in
C, 2019-01-02).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the "pull with rebase" message previously used by the
git-pull.sh script, which was removed in 49eb8d39c7 (Remove
contrib/examples/*, 2018-03-25).
Even if some out-of-tree user copy/pasted the old git-pull.sh code,
and relied on passing it a "pull with rebase" argument, we'll fall
back on the "*" case here, they just won't get the "pull with rebase"
part of their message translated.
I don't think it's likely that anyone out-of-tree relied on that, but
I'm being conservative here per the discussion that can be found
upthread of [1].
1. https://lore.kernel.org/git/87tuiwjfvi.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The is_zero_oid() function in git-submodule.sh has not been used since
e83e3333b5 (submodule: port submodule subcommand 'summary' from shell
to C, 2020-08-13), so we can remove it.
This was the last user of the sane_egrep() function in
git-sh-setup.sh. I'm not removing it in case some out-of-tree user
relied on it. Per the discussion that can be found upthread of [1].
1. https://lore.kernel.org/git/87tuiwjfvi.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Store the object ID of broken pack entries in an oidset instead of
keeping only their hashes in an unsorted array. The resulting code is
shorter and easier to read. It also handles the (hopefully) very rare
case of having a high number of bad objects better.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The single caller has a full object ID, so pass it on instead of just
its hash member.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All callers have full object IDs, so pass them on instead of just their
hash member.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fill_midx_entry() finds the position of an object ID and passes it to
nth_midxed_pack_entry(), which uses the position to look up the object
ID for its own purposes. Inline the latter into the former to avoid
that lookup.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
oidset_size() just reads a single word from memory and returns it.
Avoid the function call overhead for this trivial operation by turning
it into an inline function.
While we're at it, declare its parameter const to allow it to be used
on read-only oidsets.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 1d53f90ed9 (The "curl" executable is no longer required,
2008-06-15) the wording for requiring curl(1) was changed to the
current "you might also want...".
Mentioning the "curl" executable at all is just confusing, someone
building git might want to use it to debug things, but they might also
just use wget(1) or some other http client. The "curl" executable has
the advantage that you might be able to e.g. reproduce a bug in git's
usage of libcurl with it, but anyone going to those extents is
unlikely to be aided by this note in INSTALL.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify the usage string in the documentation so we group e.g. -i and
--info, and add the missing short options to the "-h" output.
The alignment of the second line is off now, but will be fixed with
another series of mine[1]. In the meantime let's just assume that fix
will make it in eventually for the purposes of this patch, if it's
misaligned for a bit it doesn't matter much.
1. https://lore.kernel.org/git/cover-0.2-00000000000-20210901T110917Z-avarab@gmail.com
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both Johannes and I assumed (perhaps due to familiarity with rebase)
that am --abort would return the user to a clean state. However, since
am, unlike rebase, is intended to be used within a dirty working tree,
--abort will only clean the files involved in the am operation.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a user deletes a file and places a directory of untracked files
there, then stashes all these changes, the untracked directory of files
cannot be restored until after the corresponding file in the way is
removed. So, restore changes to tracked files before restoring
untracked files.
There is no counterpart problem to worry about with the user deleting an
untracked file and then add a tracked one in its place. Git does not
track untracked files, and so will not know the untracked file was
deleted, and thus won't be able to stash the removal of that file.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a file is removed from the cache, but there is a file of the same
name present in the working directory, we would normally treat that file
in the working directory as untracked. However, in the case of stash,
doing that would prevent a simple 'git stash push', because the untracked
file would be in the way of restoring the deleted file.
git stash, however, blindly assumes that whatever is in the working
directory for a deleted file is wanted and passes that path along to
update-index. That causes problems when the working directory contains
a directory with the same name as the deleted file. Add some code for
this special case that will avoid passing directory names to
update-index.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three tests here, because the second bug is documented with
two tests: a file -> directory change and a directory -> file change.
The reason for the two tests is just to verify that both are indeed
broken but that both will be fixed by the same simple change (which will
be provided in a subsequent patch).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We recently added tips for server admins to configure various transports
to support v2's GIT_PROTOCOL variable. While the protocol-v2 document is
pretty technical and not of interest to most admins, it may be a
starting point for them to figure out how to turn on v2. Let's put some
pointers from there to the other documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The v2 protocol requires that the GIT_PROTOCOL environment variable gets
passed around, but we don't have any documentation describing how this
is supposed to work. In particular, we need to note what server admins
might need to configure to make things work.
The definition of the GIT_PROTOCOL variable is probably the best place
for this, since:
- we deal with multiple transports (ssh, http, etc).
Transport-specific documentation (like the git-http-backend bits
added in the previous commit) are helpful for those transports, but
this gives a broader overview. Plus we do not have a specific
transport endpoint program for ssh, so this is a reasonable place to
mention it.
- the server side of the protocol involves multiple programs. For now,
upload-pack is the only endpoint which uses GIT_PROTOCOL, but that
will likely expand in the future. We're better off with a central
discussion of what the server admin might need to do. However, for
discoverability, this patch adds a pointer from upload-pack's
documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Historically there was a little bit of configuration needed at the
webserver level in order to get the client's v2 protocol probes to Git.
But when we introduced the v2 protocol, we never documented these.
As of the previous commit, this should mostly work out of the box
without any explicit configuration. But it's worth documenting this to
make it clear how we expect it to work, especially in the face of
webservers which don't provide all headers over the CGI interface. Or
anybody who runs across this documentation but has an older version of
Git (or _used_ to have an older version, and wonders why they still have
a SetEnvIf line in their Apache config and whether it's still
necessary).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a client requests the v2 protocol over HTTP, they set the
Git-Protocol header. Webservers will generally make that available to
our CGI as HTTP_GIT_PROTOCOL in the environment. However, that's not
sufficient for upload-pack, etc, to respect it; they look in
GIT_PROTOCOL (without the HTTP_ prefix).
Either the webserver or the CGI is responsible for relaying that HTTP
header into the GIT_PROTOCOL variable. Traditionally, our tests have
configured the webserver to do so, but that's a burden on the server
admin. We can make this work out of the box by having the http-backend
CGI copy the contents of HTTP_GIT_PROTOCOL to GIT_PROTOCOL.
There are no new tests here. By removing the SetEnvIf line from our
test Apache config, we're now relying on this behavior of http-backend
to trigger the v2 protocol there (and there are numerous tests that fail
if this doesn't work).
There is one subtlety here: we copy HTTP_GIT_PROTOCOL only if there is
no existing GIT_PROTOCOL variable. That leaves the webserver admin free
to override the client's decision if they choose. This is unlikely to be
useful in practice, but is more flexible. And indeed, it allows the
v2-to-v0 fallback test added in the previous commit to continue working.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we use the v2 protocol by default, the connection of a v2 client
to a v2 server is well covered by the test suite. And with the
GIT_TEST_PROTOCOL_VERSION knob, we can easily test a v0 client
connecting to a v2-aware server (which will then just speak v0). But we
have no regular tests that a v2 client, when encountering a non-v2-aware
server, will correctly fall back to using v0.
In theory this is a job for the cross-version tests in t/interop, but:
- they cover only git:// and file:// clones
- they are not part of the usual test suite, so nobody ever runs them
anyway
Since using v2 over http requires configuring the web server to pass
along the Git-Protocol header, we can easily create a situation where
the server does not respect the v2 probe, and the conversation falls
back to v0.
This works just fine. This new test is not about fixing any particular
bug, but just making sure that the system works (and continues to work)
as expected.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support an arbitrary file descriptor expression in the semantic patch
for replacing open+die_errno with xopen, not just an identifier, and
apply it. This makes the error message at the single affected place
more consistent and reduces code duplication.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that verify-commit/tag will fail when a gpg key is completely
unknown. To do this we have to generate a key, use it for a signature
and delete it from our keyring aferwards completely.
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To verify a ssh signature we first call ssh-keygen -Y find-principal to
look up the signing principal by their public key from the
allowedSignersFile. If the key is found then we do a verify. Otherwise
we only validate the signature but can not verify the signers identity.
Verification uses the gpg.ssh.allowedSignersFile (see ssh-keygen(1) "ALLOWED
SIGNERS") which contains valid public keys and a principal (usually
user@domain). Depending on the environment this file can be managed by
the individual developer or for example generated by the central
repository server from known ssh keys with push access. This file is usually
stored outside the repository, but if the repository only allows signed
commits/pushes, the user might choose to store it in the repository.
To revoke a key put the public key without the principal prefix into
gpg.ssh.revocationKeyring or generate a KRL (see ssh-keygen(1)
"KEY REVOCATION LISTS"). The same considerations about who to trust for
verification as with the allowedSignersFile apply.
Using SSH CA Keys with these files is also possible. Add
"cert-authority" as key option between the principal and the key to mark
it as a CA and all keys signed by it as valid for this CA.
See "CERTIFICATES" in ssh-keygen(1).
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For ssh the user.signingkey can be a filename/path or even a literal ssh pubkey.
In push certs and textual output we prefer the ssh fingerprint instead.
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If user.signingkey is not set and a ssh signature is requested we call
gpg.ssh.defaultKeyCommand (typically "ssh-add -L") and use the first key we get
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implements the actual sign_buffer_ssh operation and move some shared
cleanup code into a strbuf function
Set gpg.format = ssh and user.signingkey to either a ssh public key
string (like from an authorized_keys file), or a ssh key file.
If the key file or the config value itself contains only a public key
then the private key needs to be available via ssh-agent.
gpg.ssh.program can be set to an alternative location of ssh-keygen.
A somewhat recent openssh version (8.2p1+) of ssh-keygen is needed for
this feature. Since only ssh-keygen is needed it can this way be
installed seperately without upgrading your system openssh packages.
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generate some ssh keys and a allowedSignersFile for testing
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Openssh v8.2p1 added some new options to ssh-keygen for signature
creation and verification. These allow us to use ssh keys for git
signatures easily.
In our corporate environment we use PIV x509 Certs on Yubikeys for email
signing/encryption and ssh keys which I think is quite common
(at least for the email part). This way we can establish the correct
trust for the SSH Keys without setting up a separate GPG Infrastructure
(which is still quite painful for users) or implementing x509 signing
support for git (which lacks good forwarding mechanisms).
Using ssh agent forwarding makes this feature easily usable in todays
development environments where code is often checked out in remote VMs / containers.
In such a setup the keyring & revocationKeyring can be centrally
generated from the x509 CA information and distributed to the users.
To be able to implement new signing formats this commit:
- makes the sigc structure more generic by renaming "gpg_output" to
"output"
- introduces function pointers in the gpg_format structure to call
format specific signing and verification functions
- moves format detection from verify_signed_buffer into the check_signature
api function and calls the format specific verify
- renames and wraps sign_buffer to handle format specific signing logic
as well
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic for auto-correction of misspelt subcommands learned to go
interactive when the help.autocorrect configuration variable is set
to 'prompt'.
* ab/help-autocorrect-prompt:
help.c: help.autocorrect=prompt waits for user action
Tie-break branches that point at the same object in the list of
branches on GitWeb to show the one pointed at by HEAD early.
* gh/gitweb-branch-sort:
gitweb: use HEAD as secondary sort key in git_get_heads_list()
Doc update plus improved error reporting.
* jk/log-warn-on-bogus-encoding:
docs: use "character encoding" to refer to commit-object encoding
logmsg_reencode(): warn when iconv() fails
Code clean up to migrate callers from older advice_config[] based
API to newer advice_if_enabled() and advice_enabled() API.
* ab/retire-advice-config:
advice: move advice.graftFileDeprecated squashing to commit.[ch]
advice: remove use of global advice_add_embedded_repo
advice: remove read uses of most global `advice_` variables
advice: add enum variants for missing advice variables
After "git clone --recurse-submodules", all submodules are cloned
but they are not by default recursed into by other commands. With
submodule.stickyRecursiveClone configuration set, submodule.recurse
configuration is set to true in a repository created by "clone"
with "--recurse-submodules" option.
* mk/clone-recurse-submodules:
clone: set submodule.recurse=true if submodule.stickyRecursiveClone enabled
The output from "git fast-export", when its anonymization feature
is in use, showed an annotated tag incorrectly.
* tk/fast-export-anonymized-tag-fix:
fast-export: fix anonymized tag using original length
Fixes on usage message from "git commit-graph".
* ab/commit-graph-usage:
commit-graph: show "unexpected subcommand" error
commit-graph: show usage on "commit-graph [write|verify] garbage"
commit-graph: early exit to "usage" on !argc
multi-pack-index: refactor "goto usage" pattern
commit-graph: use parse_options_concat()
commit-graph: remove redundant handling of -h
commit-graph: define common usage with a macro
Even when running "git send-email" without its own threaded
discussion support, a threading related header in one message is
carried over to the subsequent message to result in an unwanted
threading, which has been corrected.
* mh/send-email-reset-in-reply-to:
send-email: avoid incorrect header propagation
Buggy tests could damage repositories outside the throw-away test
area we created. We now by default export GIT_CEILING_DIRECTORIES
to limit the damage from such a stray test.
* sg/set-ceiling-during-tests:
test-lib: set GIT_CEILING_DIRECTORIES to protect the surrounding repository
The sparse-index support can corrupt the index structure by storing
a stale and/or uninitialized data, which has been corrected.
* jh/sparse-index-resize-fix:
sparse-index: copy dir_hash in ensure_full_index()
"git fetch --quiet" optimization to avoid useless computation of
info that will never be displayed.
* ps/fetch-omit-formatting-under-quiet:
fetch: skip formatting updated refs with `--quiet`
"git upload-pack" which runs on the other side of "git fetch"
forgot to take the ref namespaces into account when handling
want-ref requests.
* ka/want-ref-in-namespace:
docs: clarify the interaction of transfer.hideRefs and namespaces
upload-pack.c: treat want-ref relative to namespace
t5730: introduce fetch command helper
The advice message that "git cherry-pick" gives when it asks
conflicted replay of a commit to be resolved by the end user has
been updated.
* zh/cherry-pick-advice:
cherry-pick: use better advice message
"git rebase" by default skips changes that are equivalent to
commits that are already in the history the branch is rebased onto;
give messages when this happens to let the users be aware of
skipped commits, and also teach them how to tell "rebase" to keep
duplicated changes.
* js/advise-when-skipping-cherry-picked:
sequencer: advise if skipping cherry-picked commit
In preceding commits the race of renaming .idx files in place before
.rev files and other auxiliary files was fixed in pack-write.c's
finish_tmp_packfile(), builtin/repack.c's "struct exts", and
builtin/index-pack.c's final(). As noted in the change to pack-write.c
we left in place the issue of writing *.bitmap files after the *.idx,
let's fix that issue.
See 7cc8f97108 (pack-objects: implement bitmap writing, 2013-12-21)
for commentary at the time when *.bitmap was implemented about how
those files are written out, nothing in that commit contradicts what's
being done here.
Note that this commit and preceding ones only close any race condition
with *.idx files being written before their auxiliary files if we're
optimistic about our lack of fsync()-ing in this are not tripping us
over. See the thread at [1] for a rabbit hole of various discussions
about filesystem races in the face of doing and not doing fsync() (and
if doing fsync(), not doing it properly).
We may want to fsync the containing directory once after renaming the
*.idx file into place, but that is outside the scope of this series.
1. https://lore.kernel.org/git/8735qgkvv1.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the finish_tmp_packfile() function and use the split-up version
in pack-objects.c in preparation for moving the step of renaming the
*.idx file later as part of a function change.
Since the only other caller of finish_tmp_packfile() was in
bulk-checkin.c, and it won't be needing a change to its *.idx renaming,
provide a thin wrapper for the old function as a static function in that
file. If other callers end up needing the simpler version it could be
moved back to "pack-write.c" and "pack.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar spirit as preceding patches to `git repack` and `git
pack-objects`, fix the identical problem in `git index-pack`.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the renaming in final() into a helper function, this is
similar in spirit to a preceding refactoring of finish_tmp_packfile()
in pack-write.c.
Before e37d0b8730 (builtin/index-pack.c: write reverse indexes,
2021-01-25) it probably wasn't worth it to have this sort of helper,
due to the differing "else if" case for "pack" files v.s. "idx" files.
But since we've got "rev" as well now, let's do the renaming via a
helper, this is both a net decrease in lines, and improves the
readability, since we can easily see at a glance that the logic for
writing these three types of files is exactly the same, aside from the
obviously differing cases of "*final_name" being NULL, and
"make_read_only_if_same" being different.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar spirit as the previous patch, fix the identical problem
from `git repack` (which invokes `pack-objects` with a temporary
location for output, and then moves the files into their final locations
itself).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We treat the presence of an `.idx` file as the indicator of whether or
not it's safe to use a packfile. But `finish_tmp_packfile()` (which is
responsible for writing the pack and moving the temporary versions of
all of its auxiliary files into place) is inconsistent about the write
order.
Specifically, it moves the `.rev` file into place after the `.idx`,
leaving open the possibility to open a pack which looks "ready" (because
the `.idx` file exists and is readable) but appears momentarily to not
have a `.rev` file. This causes Git to fall back to generating the
pack's reverse index in memory.
Though racy, this amounts to an unnecessary slow-down at worst, and
doesn't affect the correctness of the resulting reverse index.
Close this race by moving the .rev file into place before moving the
.idx file into place.
This still leaves the issue of `.idx` files being renamed into place
before the auxiliary `.bitmap` file is renamed when in pack-object.c's
write_pack_file() "write_bitmap_index" is true. That race will be
addressed in subsequent commits.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the renaming in finish_tmp_packfile() into a helper function.
The callers are now expected to pass a "name_buffer" ending in
"pack-OID." instead of the previous "pack-", we then append "pack",
"idx" or "rev" to it.
By doing the strbuf_setlen() in rename_tmp_packfile() we reuse the
buffer and avoid the repeated allocations we'd get if that function had
its own temporary "struct strbuf".
This approach of reusing the buffer does make the last user in
pack-object.c's write_pack_file() slightly awkward, since we needlessly
do a strbuf_setlen() before calling strbuf_release() for consistency. In
subsequent changes we'll move that bitmap writing code around, so let's
not skip the strbuf_setlen() now.
The previous strbuf_reset() idiom originated with 5889271114
(finish_tmp_packfile():use strbuf for pathname construction,
2014-03-03), which in turn was a minimal adjustment of pre-strbuf code
added in 0e990530ae (finish_tmp_packfile(): a helper function,
2011-10-28).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
finish_bulk_checkin() stores the checksum from finalize_hashfile() by
writing to the `hash` member of `struct object_id`, but that hash has
nothing to do with an object id (it's just a convenient location that
happens to be sized correctly).
Store the hash directly in an unsigned char array. This behaves the same
as writing to the `hash` member, but makes the intent clearer (and
avoids allocating an extra four bytes for the `algo` member of `struct
object_id`). It likewise prevents the possibility of a segfault when
reading `algo` (e.g., by calling `oid_to_hex()`) if it is uninitialized.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The t5562 script occasionally takes 60 extra seconds to complete due to
a race condition in the invoke-with-content-length.pl helper.
The way it's supposed to work is this:
- we set up a SIGCLD handler
- we kick off http-backend and write to it with a set content-length,
but _don't_ close the pipe
- we sleep for 60 seconds, assuming that SIGCLD from http-backend
finishing will interrupt us
- after the sleep finishes (whetherby 60 seconds or because it was
interrupted by the signal), we check a flag to see if our SIGCLD
handler was called. If not, then we complain.
This usually completes immediately, because the signal interrupts our
sleep. But very occasionally the child process dies _before_ we hit the
sleep, so we don't realize it. The test still completes successfully
(because our $exited flag is set), but it takes an extra 60 seconds.
There's no way to check the flag and sleep atomically. So the best we
can do with this approach is to sleep in smaller chunks (say, 1 second)
and check the flag incrementally. Then we waste a maximum of 1 second if
we lose the race. This was proposed in:
https://lore.kernel.org/git/20190218205028.32486-1-max@max630.net/
and it does work. But we can do better.
Instead of blocking on sleep and waiting for the child signal to
interrupt us, we can block on the child exiting and set an alarm signal
to trigger the timeout.
This lets us exit the script immediately when the child behaves (with no
race possible), and wait a maximum of 60 seconds when it doesn't.
Note one small subtlety: perl is very willing to restart the waitpid()
call after the alarm is delivered, even if we've thrown an exception via
die. "perldoc -f alarm" claims you can get around this with an eval/die
combo (and even has some example code), but it doesn't seem to work for
me with waitpid(); instead, we continue waiting until the child exits.
So instead, we'll instruct the child process to exit in the alarm
handler itself. In the original code this was done by calling
close($out). That would continue to work, since our child is always
http-backend, which should exit when its stdin closes. But we can be
even more robust against a hung or confused child by sending a KILL
signal, which should terminate it immediately.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only need to provide a mode if we are willing to let open(2) create
the file, which is not the case here, so drop the unnecessary parameter.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the catch-all error message with specific ones for opening and
duplicating by calling the wrappers xopen and xdup. The code becomes
easier to follow when error handling is reduced to two letters.
Remove the unnecessary mode parameter while at it -- we expect /dev/null
to already exist.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting in commit 0f533c7284 (pack-bitmap: read multi-pack bitmaps,
2021-08-31), we no longer look at the "struct bitmap_index" passed to
try_partial_reuse(). This is because we only handle verbatim reuse from
a single pack: either the pack whose bitmap we're looking at, or the
"preferred" pack of a midx bitmap. And thus the primary item we look at
is the "pack" parameter added by that same commit, and not the
bitmap_git->pack parameter (which would be NULL for a midx bitmap). It's
our caller, reuse_partial_packfile_from_bitmap(), which decides which
pack to use and passes it in to us.
Drop the unused parameter to prevent confusion.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We never look at the repository argument which is passed. This makes
sense, since the multi_pack_index struct already tells us everything we
need to access the files in its associated object directory.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hard work was already done with 'git merge' and the ORT strategy.
Just add extra tests to see that we get the expected results in the
non-conflict cases.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sequencer is used by 'cherry-pick' and 'rebase' to sequence a list
of operations that modify the index. Since we intend to remove the need
for 'command_requires_full_index', we need to ensure the sparse index is
expanded every time it is written to disk between these steps. That is,
unless the merge strategy is 'ort' where the index can remain sparse
throughout.
There are two main places to be extra careful about a full index:
1. Right before calling merge_trees(), ensure the index is full. This
happens within an 'else' where the 'if' block checks if the 'ort'
strategy is selected.
2. During read_and_refresh_cache(), the index might be written to disk
and converted to sparse in the process. Ensure it expands back to
full afterwards by checking if the strategy is _not_ 'ort'. This
'if' statement is the logical negation of the 'if' in item (1).
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests to check that cherry-pick and rebase behave the same in the
sparse-index case as in the full index cases. These tests are agnostic
to GIT_TEST_MERGE_ALGORITHM, so a full CI test suite will check both the
'ort' and 'recursive' strategies on this test.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge conflicts happen often enough to want to avoid expanding a sparse
index when they happen, as long as those conflicts are within the
sparse-checkout cone. If a conflict exists outside of the
sparse-checkout cone, then we still need to expand before iterating over
the index entries. This is critical to do in advance because of how the
original_cache_nr is tracked to allow inserting and replacing cache
entries.
Iterate over the conflicted files and check if any paths are outside of
the sparse-checkout cone. If so, then expand the full index.
Add a test that demonstrates that we do not expand the index, even when
we hit a conflict within the sparse-checkout cone.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow 'git merge' to operate without expanding a sparse index, at least
not immediately. The index still will be expanded in a few cases:
1. If the merge strategy is 'recursive', then we enable
command_requires_full_index at the start of the merge_recursive()
method. We expect sparse-index users to also have the 'ort' strategy
enabled.
2. With the 'ort' strategy, if the merge results in a conflicted file,
then we expand the index before updating the working tree. The loop
that iterates over the worktree replaces index entries and tracks
'origintal_cache_nr' which can become completely wrong if the index
expands in the middle of the operation. This safety valve is
important before that loop starts. A later change will focus this
to only expand if we indeed have a conflict outside of the
sparse-checkout cone.
3. Other merge strategies are executed as a 'git merge-X' subcommand,
and those strategies are currently protected with the
'command_requires_full_index' guard.
Some test updates are required, including a mistaken 'git checkout -b'
that did not specify the base branch, causing merges to be fast-forward
merges.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff_populate_filespec() method is used to describe the diff after a
merge operation is complete. In order to avoid expanding a sparse index,
the reuse_worktree_file() needs to be adapted to ignore files that are
outside of the sparse-checkout cone. The file names and OIDs used for
this check come from the merged tree in the case of the ORT strategy,
not the index, hence the ability to look into these paths without having
already expanded the index.
The work done by reuse_worktree_file() is only an optimization, and
requires the file being on disk for it to be of any value. Thus, it is
safe to exit the method early if we do not expect the file on disk.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clean up a TODO in revision.h by removing the "submodule" field from
struct setup_revision_opt. This field is only used to specify the ref
store to use, so use rev_info->repo to determine the ref store instead.
The only users of this field are merge-ort.c and merge-recursive.c.
However, both these files specify the superproject as rev_info->repo and
the submodule as setup_revision_opt->submodule. In order to be able to
pass the submodule as rev_info->repo, all commits must be parsed with
the submodule explicitly specified; this patch does that as well. (An
incremental solution in which only some commits are parsed with explicit
submodule will not work, because if the same commit is parsed twice in
different repositories, there will be 2 heap-allocated object structs
corresponding to that commit, and any flag set by the revision walking
mechanism on one of them will not be reflected onto the other.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for a subsequent commit that migrates code using
add_submodule_odb() to repo_submodule_init(), teach
repo_submodule_init() to support submodules with unabsorbed gitdirs.
(See the documentation for "git submodule absorbgitdirs" for more
information about absorbed and unabsorbed gitdirs.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In get_submodule_repo_for(), there is a fallback code path for the case
in which a submodule has an unabsorbed gitdir. (See the documentation
for "git submodule absorbgitdirs" for more information about absorbed
and unabsorbed gitdirs.) However, this code path is unnecessary, because
such submodules are already handled: when the fetch_task is created in
fetch_task_create(), it will create its own struct submodule with a path
and name, and repo_submodule_init() can handle such a struct.
This fallback was introduced in 26f80ccfc1 ("submodule: migrate
get_next_submodule to use repository structs", 2018-12-05). It was
unnecessary even then, but perhaps it escaped notice because its parent
commit d5498e0871 ("repository: repo_submodule_init to take a submodule
struct", 2018-12-05) was the one that taught repo_submodule_init() to
handle such created structs. Before, it took a path and always checked
.gitmodules, so it truly would have failed if there were no entry in
.gitmodules.
(Note to reviewers: in 26f80ccfc1, the "own struct submodule" I
mentioned is in get_next_submodule(), not fetch_task_create().)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In many cases where we spawned child processes that _may_ trigger a
repack, we explicitly closed the object store first (so that the
`repack` process can delete the `.pack` files, which would otherwise not
be possible on Windows since files cannot be deleted as long as they as
still in use).
Wherever possible, we now use the new `close_object_store` bit of the
`run_command()` API, to delay closing the object store even further.
This makes the code easier to maintain because it is now more obvious
that we only release those file handles because of those child
processes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before spawning the auto maintenance, we need to make sure that we
release all open file handles to all the `.pack` files (and MIDX files
and commit-graph files and...) so that the maintenance process has the
freedom to delete those files.
So far, we did this manually every time before calling
`run_auto_maintenance()`. With the new `close_object_store` flag, we can
do that implicitly in that function, which is more robust because future
callers won't be able to forget to close the object store.
Note: this changes behavior slightly, as we previously _always_ closed
the object store, but now we only close the object store when actually
running the auto maintenance. In practice, this should not matter (if
anything, it might speed up operations where auto maintenance is
disabled).
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Especially on Windows, where files cannot be deleted if _any_ process
holds an open file handle to them, it is important to close the object
store (releasing all handles to all `.pack` files) before running a
command that might spawn a garbage collection.
This scenario is so common that we frequently see the pattern of closing
the object store before running auto maintenance or another Git command.
Let's make this much more convenient by teaching the `run_command()`
machinery a new flag to release the object store before spawning the
process.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The values were listed unaligned, and with powers of two spelled out in
decimal. The list is easier to parse for human readers if the numbers
are aligned and spelled out as powers of two (using the bit-shift
operator `<<`).
While at it, remove a code comment that was unclear at best, and
confusing at worst.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The repository of git-l10n is a fork of "git/git" on GitHub, and uses
GitHub pull request for code review. A helper program "git-po-helper"
can be used to check typos in ".po" files, validate syntax, and check
commit messages. It would be convenient to integrate this helper program
to CI and add comments in pull request.
The new github-action workflow will be enabled for l10n related
operations, such as:
* Operations on a repository named as "git-po", such as a repository
forked from "git-l10n/git-po".
* Push to a branch that contains "l10n" in the name.
* Pull request from a remote branch which has "l10n" in the name, such
as: "l10n/fix-fuzzy-translations".
The new l10n workflow listens to two types of github events:
on: [push, pull_request_target]
The reason we use "pull_request_target" instead of "pull_request" is
that pull requests from forks receive a read-only GITHUB_TOKEN and
workflows cannot write comments back to pull requests for security
reasons. GitHub provides a "pull_request_target" event to resolve
security risks by checking out the base commit from the target
repository, and provide write permissions for the workflow.
By default, administrators can set strict permissions for workflows. The
following code is used to modify the permissions for the GITHUB_TOKEN
and grant write permission in order to create comments in pull-requests.
permissions:
pull-requests: write
This workflow will scan commits one by one. If a commit does not look
like a l10n commit (no file in "po/" has been changed), the scan process
will stop immediately. For a "push" event, no error will be reported
because it is normal to push non-l10n commits merged from upstream. But
for the "pull_request_target" event, errors will be reported. For this
reason, additional option is provided for "git-po-helper".
git-po-helper check-commits \
--github-action-event="${{ github.event_name }}" -- \
<base>..<head>
The output messages of "git-po-helper" contain color codes not only for
console, but also for logfile. This is because "git-po-helper" uses a
package named "logrus" for logging, and I use an additional option
"ForceColor" to initialize "logrus" to print messages in a user-friendly
format in logfile output. These color codes help produce beautiful
output for the log of workflow, but they must be stripped off when
creating comments for pull requests. E.g.:
perl -pe 's/\e\[[0-9;]*m//g' git-po-helper.out
"git-po-helper" may generate two kinds of suggestions, errors and
warnings. All the errors and warnings will be reported in the log of the
l10n workflow. However, warnings in the log of the workflow for a
successfully running "git-po-helper" can easily be ignored by users.
For the "pull_request_target" event, this issue is resolved by creating
an additional comment in the pull request. A l10n contributor should try
to fix all the errors, and should pay attention to the warnings.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Line-wrap the definition of finish_tmp_packfile() to make subsequent
changes easier to read. See 0e990530ae (finish_tmp_packfile(): a
helper function, 2011-10-28) for the commit that introduced this
overly long line.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "Filtering content" progress in entry.c:finish_delayed_checkout()
is unusual because of how it calculates the progress count and because
it shows the progress of a nested loop. It works basically like this:
start_delayed_progress(p, nr_of_paths_to_filter)
for_each_filter {
display_progress(p, nr_of_paths_to_filter - nr_of_paths_still_left_to_filter)
for_each_path_handled_by_the_current_filter {
checkout_entry()
}
}
stop_progress(p)
There are two issues with this approach:
- The work done by the last filter (or the only filter if there is
only one) is never counted, so if the last filter still has some
paths to process, then the counter shown in the "done" progress
line will not match the expected total.
The partially-RFC series to add a GIT_TEST_CHECK_PROGRESS=1
mode[1] helps spot this issue. Under it the 'missing file in
delayed checkout' and 'invalid file in delayed checkout' tests in
't0021-conversion.sh' fail, because both use only one
filter. (The test 'delayed checkout in process filter' uses two
filters but the first one does all the work, so that test already
happens to succeed even with GIT_TEST_CHECK_PROGRESS=1.)
- The progress counter is updated only once per filter, not once per
processed path, so if a filter has a lot of paths to process, then
the counter might stay unchanged for a long while and then make a
big jump (though the user still gets a sense of progress, because
we call display_throughput() after each processed path to show the
amount of processed data).
Move the display_progress() call to the inner loop, right next to that
checkout_entry() call that does the hard work for each path, and use a
dedicated counter variable that is incremented upon processing each
path.
After this change the 'invalid file in delayed checkout' in
't0021-conversion.sh' would succeed with the GIT_TEST_CHECK_PROGRESS=1
assertion discussed above, but the 'missing file in delayed checkout'
test would still fail.
It'll fail because its purposefully buggy filter doesn't process any
paths, so we won't execute that inner loop at all, see [2] for how to
spot that issue without GIT_TEST_CHECK_PROGRESS=1. It's not
straightforward to fix it with the current progress.c library (see [3]
for an attempt), so let's leave it for now.
Let's also initialize the *progress to "NULL" while we're at it. Since
7a132c628e (checkout: make delayed checkout respect --quiet and
--no-progress, 2021-08-26) we have had progress conditional on
"show_progress", usually we use the idiom of a "NULL" initialization
of the "*progress", rather than the more verbose ternary added in
7a132c628e.
1. https://lore.kernel.org/git/20210620200303.2328957-1-szeder.dev@gmail.com/
2. http://lore.kernel.org/git/20210802214827.GE23408@szeder.dev
3. https://lore.kernel.org/git/20210620200303.2328957-7-szeder.dev@gmail.com/
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final value of the counter of the "Scanning merged commits"
progress line is always one less than its expected total, e.g.:
Scanning merged commits: 83% (5/6), done.
This happens because while iterating over an array the loop variable
is passed to display_progress() as-is, but while C arrays (and thus
the loop variable) start at 0 and end at N-1, the progress counter
must end at N. Fix this by passing 'i + 1' to display_progress(), like
most other callsites do.
There's an RFC series to add a GIT_TEST_CHECK_PROGRESS=1 mode[1] which
catches this issue in the 'fetch.writeCommitGraph' and
'fetch.writeCommitGraph with submodules' tests in
't5510-fetch.sh'. The GIT_TEST_CHECK_PROGRESS=1 mode is not part of
this series, but future changes to progress.c may add it or similar
assertions to catch this and similar bugs elsewhere.
1. https://lore.kernel.org/git/20210620200303.2328957-1-szeder.dev@gmail.com/
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Build update for Apple clang.
* cb/makefile-apple-clang:
build: catch clang that identifies itself as "$VENDOR clang"
build: clang version may not be followed by extra words
build: update detect-compiler for newer Xcode version
"git branch -D <branch>" used to refuse to remove a broken branch
ref that points at a missing commit, which has been corrected.
* rs/branch-allow-deleting-dangling:
branch: allow deleting dangling branches with --force
The delayed checkout code path in "git checkout" etc. were chatty
even when --quiet and/or --no-progress options were given.
* mt/quiet-with-delayed-checkout:
checkout: make delayed checkout respect --quiet and --no-progress
"git diff --relative" segfaulted and/or produced incorrect result
when there are unmerged paths.
* dd/diff-files-unmerged-fix:
diff-lib: ignore paths that are outside $cwd if --relative asked
"git maintenance" scheduler fix for macOS.
* js/maintenance-launchctl-fix:
maintenance: skip bootout/bootstrap when plist is registered
maintenance: create `launchctl` configuration using a lock file
mmap() imitation used to call xmalloc() that dies upon malloc()
failure, which has been corrected to just return an error to the
caller to be handled.
* rs/git-mmap-uses-malloc:
compat: let git_mmap use malloc(3) directly
On Windows, files cannot be removed nor renamed if there are still
handles held by a process. To remedy that, we try to release all open
handles to any `.pack` file before e.g. repacking (which would want to
remove the original `.pack` file(s) after it is done).
Since the `read_cache_unmerged()` and/or the `get_oid()` call in `git
pull` can cause `.pack` files to be opened, we need to release the open
handles before calling `git fetch`: the latter process might want to
spawn an auto-gc, which in turn might want to repack the objects.
This commit is similar in spirit to 5bdece0d70 (gc/repack: release
packs when needed, 2018-12-15).
This fixes https://github.com/git-for-windows/git/issues/3336.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The slab has information about the commit graph. That means that it is
meaningless (and even misleading) when the commit graph was closed.
This seems not to matter currently, but we're about to fix a
Windows-specific bug where `git pull` does not close the object store
before fetching (risking that an implicit auto-gc fails to remove the
now-obsolete pack file(s)), and once we have that bug fix in place, it
does matter: after that bug fix, we will open the object store, do some
stuff with it, then close it, fetch, and then open it again, and do more
stuff. If we close the commit graph without releasing the corresponding
slab, we're hit by a symptom like this in t5520.19:
BUG: commit-reach.c:85: bad generation skip 9223372036854775807
> 3 at 5cd378271655d43a3b4477520014f02213ad1546
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patches have made "git grep" no longer need to add
submodule ODBs as alternates, at least for the code paths tested in
t7814. Demonstrate this by making adding a submodule ODB as an alternate
fatal in this test.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reading the config of a submodule, if reading from a blob, read
using an explicitly specified repository instead of by adding the
submodule's ODB as an alternate and then reading an object from
the_repository.
This makes the "grep --recurse-submodules with submodules without
.gitmodules in the working tree" test in t7814 work when
GIT_TEST_FATAL_REGISTER_SUBMODULE_ODB is true.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Record the repository whenever an OID grep source is created, and teach
the worker threads to explicitly provide the repository when accessing
objects.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, struct repository objects corresponding to submodules are
allocated on the stack in grep_submodule(). This currently works because
they will not be used once grep_submodule() exits, but a subsequent
patch will require these structs to be accessible for longer (perhaps
even in another thread). Allocate them on the heap and clear them only
at the very end.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace an existing parse_object_or_die() call (which implicitly works
on the_repository) with a function call that allows a repository to be
passed in. There is no such direct equivalent to parse_object_or_die(),
but we only need the type of the object, so replace with
oid_object_info().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep_source_init() can create "struct grep_source" objects and,
depending on the value of the type passed, some void-pointer parameters have
different meanings. Because one of these types (GREP_SOURCE_OID) will
require an additional parameter in a subsequent patch, take the
opportunity to increase clarity and type safety by replacing this
function with individual functions for each type.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the parent commit, Git was taught to add submodule ODBs as alternates
lazily, but grep does not use this because it computes the path to add
directly, not going through add_submodule_odb(). Add an equivalent to
add_submodule_odb() that takes the exact ODB path and teach grep to use
it.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach Git to add submodule ODBs as alternates to the object store of
the_repository only upon the first access of an object not in
the_repository, and not when add_submodule_odb() is called.
This provides a means of gradually migrating from accessing a
submodule's object through alternates to accessing a submodule's object
by explicitly passing its repository object. Any Git command can declare
that it might access submodule objects by calling add_submodule_odb()
(as they do now), but the submodule ODBs themselves will not be added
until needed, so individual commands and/or combinations of arguments
can be migrated one by one.
[The advantage of explicit repository-object passing is code clarity (it
is clear which repository an object read is from), performance (there is
no need to linearly search through all submodule ODBs whenever an object
is accessed from any repository, whether superproject or submodule), and
the possibility of future features like partial clone submodules (which
right now is not possible because if an object is missing, we do not
know which repository to lazy-fetch into).]
This commit also introduces an environment variable that a test may set
to make the actual registration of alternates fatal, in order to
demonstrate that its codepaths do not need this registration.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running tests with GIT_TEST_SPLIT_INDEX=1 is supposed to turn on the
split index feature and trigger index splitting (mostly) randomly.
Alas, this has been broken since 6e37c8ed3c (read-cache.c: fix writing
"link" index ext with null base oid, 2019-02-13), and
GIT_TEST_SPLIT_INDEX=1 hasn't triggered any index splitting since
then.
This patch makes GIT_TEST_SPLIT_INDEX work again, though it doesn't
restore the pre-6e37c8ed3c behavior. To understand the bug, the fix,
and the behavior change we first have to look at how
GIT_TEST_SPLIT_INDEX used to work before 6e37c8ed3c:
There are two places where we check the value of
GIT_TEST_SPLIT_INDEX, and before 6e37c8ed3c they worked like this:
1) In the lower-level do_write_index(), where, if
GIT_TEST_SPLIT_INDEX is enabled, we call init_split_index().
This call merely allocates and zero-initializes
'istate->split_index', but does nothing else (i.e. doesn't fill
the base/shared index with cache entries, doesn't actually
write a shared index file, etc.). Pertinent to this issue, the
hash of the base index remains all zeroed out.
2) In the higher-level write_locked_index(), but only when
'istate->split_index' has already been initialized. Then, if
GIT_TEST_SPLIT_INDEX is enabled, it randomly sets the flag that
triggers index splitting later in this function. This
randomness comes from the first byte of the hash of the base
index via an 'if ((first_byte & 15) < 6)' condition.
However, if 'istate->split_index' hasn't been initialized (i.e.
it is still NULL), then write_locked_index() just calls
do_write_locked_index(), which internally calls the above
mentioned do_write_index().
This means that while GIT_TEST_SPLIT_INDEX=1 usually triggered index
splitting randomly, the first two index writes were always
deterministic (though I suspect this was unintentional):
- The initial index write never splits the index.
During the first index write write_locked_index() is called with
'istate->split_index' still uninitialized, so the check in 2) is
not executed. It still calls do_write_index(), though, which
then executes the check in 1). The resulting all zero base
index hash then leads to the 'link' extension being written to
'.git/index', though a shared index file is not written:
$ rm .git/index
$ GIT_TEST_SPLIT_INDEX=1 git update-index --add file
$ test-tool dump-split-index .git/index
own c6ef71168597caec8553c83d9d0048f1ef416170
base 0000000000000000000000000000000000000000
100644 d00491fd7e5bb6fa28c517a0bb32b8b506539d4d 0 file
replacements:
deletions:
$ ls -l .git/sharedindex.*
ls: cannot access '.git/sharedindex.*': No such file or directory
- The second index write always splits the index.
When the index written in the previous point is read,
'istate->split_index' is initialized because of the presence of
the 'link' extension. So during the second write
write_locked_index() does run the check in 2), and the first
byte of the all zero base index hash always fulfills the
randomness condition, which in turn always triggers the index
splitting.
- Subsequent index writes will find the 'link' extension with a
real non-zero base index hash, so from then on the check in 2)
is executed and the first byte of the base index hash is as
random as it gets (coming from the SHA-1 of index data including
timestamps and inodes...).
All this worked until 6e37c8ed3c came along, and stopped writing the
'link' extension if the hash of the base index was all zero:
$ rm .git/index
$ GIT_TEST_SPLIT_INDEX=1 git update-index --add file
$ test-tool dump-split-index .git/index
own abbd6f6458d5dee73ae8e210ca15a68a390c6fd7
not a split index
$ ls -l .git/sharedindex.*
ls: cannot access '.git/sharedindex.*': No such file or directory
So, since the first index write with GIT_TEST_SPLIT_INDEX=1 doesn't
write a 'link' extension, in the second index write
'istate->split_index' remains uninitialized, and the check in 2) is
not executed, and ultimately the index is never split.
Fix this by modifying write_locked_index() to make sure to check
GIT_TEST_SPLIT_INDEX even if 'istate->split_index' is still
uninitialized, and initialize it if necessary. The check for
GIT_TEST_SPLIT_INDEX and separate init_split_index() call in
do_write_index() thus becomes unnecessary, so remove it. Furthermore,
add a test to 't1700-split-index.sh' to make sure that
GIT_TEST_SPLIT_INDEX=1 will keep working (though only check the
index splitting on the first index write, because after that it will
be random).
Note that this change does not restore the pre-6e37c8ed3c behaviour,
as it will deterministically split the index already on the first
index write. Since GIT_TEST_SPLIT_INDEX is purely a developer aid,
there is no backwards compatibility issue here. The new behaviour did
trigger test failures in 't0003-attributes.sh' and 't1600-index.sh',
though, which have been fixed in preparatory patches in this series.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse index and split index features are said to be currently
incompatible [1], and consequently GIT_TEST_SPLIT_INDEX=1 might
interfere with the test cases exercising the sparse index feature.
Therefore GIT_TEST_SPLIT_INDEX is already explicitly disabled for the
whole of 't1092-sparse-checkout-compatibility.sh'. There are,
however, two other test cases exercising sparse index, namely
'sparse-index enabled and disabled' in
't1091-sparse-checkout-builtin.sh' and 'status succeeds with sparse
index' in 't7519-status-fsmonitor.sh', and these two could fail with
GIT_TEST_SPLIT_INDEX=1 as well [2].
Unset GIT_TEST_SPLIT_INDEX and disable the split index in these two
test cases to avoid such interference.
Note that this is the minimal change to merely avoid failures when
these test cases are run with GIT_TEST_SPLIT_INDEX=1. Interestingly,
though, without these changes the 'git sparse-checkout init --cone
--sparse-index' commands still succeed even with split index, and set
all the necessary configuration variables and create the initial
'$GIT_DIR/info/sparse-checkout' file, but the test failures are caused
by later sanity checks finding that the index is not in fact a sparse
index. This indicates that 'git sparse-checkout init --sparse-index'
lacks some error checking and its tests lack coverage related to split
index, but fixing those issues is beyond the scope of this patch
series.
[1] https://public-inbox.org/git/48e9c3d6-407a-1843-2d91-22112410e3f8@gmail.com/
[2] Neither of these test cases fail at the moment, because
GIT_TEST_SPLIT_INDEX=1 is broken and never splits the index, and
it broke long before the sparse index feature was added.
This patch series is about to fix GIT_TEST_SPLIT_INDEX, and then
both test cases mentioned above would fail.
(The diff is best viewed with '--ignore-all-space')
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reading a split index git always looks for its referenced shared
base index in the gitdir of the current repository, even when reading
an alternate index specified via GIT_INDEX_FILE, and even when that
alternate index file is the "main" '.git/index' file of an other
repository. However, if that split index and its referenced shared
index files were written by a git command running entirely in that
other repository, then, naturally, the shared index file is written to
that other repository's gitdir. Consequently, a git command
attempting to read that shared index file while running in a different
repository won't be able find it and will error out.
I'm not sure in what use case it is necessary to read the index of one
repository by a git command running in a different repository, but it
is certainly possible to do so, and in fact the test 'bare repository:
check that --cached honors index' in 't0003-attributes.sh' does
exactly that. If GIT_TEST_SPLIT_INDEX=1 were to split the index in
just the right moment [1], then this test would indeed fail, because
the referenced shared index file could not be found.
Let's look for the referenced shared index file not only in the gitdir
of the current directory, but, if the shared index is not there, right
next to the split index as well.
[1] We haven't seen this issue trigger a failure in t0003 yet,
because:
- While GIT_TEST_SPLIT_INDEX=1 is supposed to trigger index
splitting randomly, the first index write has always been
deterministic and it has never split the index.
- That alternate index file in the other repository is written
only once in the entire test script, so it's never split.
However, the next patch will fix GIT_TEST_SPLIT_INDEX, and while
doing so it will slightly change its behavior to always split the
index already on the first index write, and t0003 would always
fail without this patch.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests in 't1600-index.sh' check that various bogus index version
values are recognized and an appropriate warning message is issued.
GIT_TEST_SPLIT_INDEX=1 is supposed to trigger index splitting
randomly, and thus might interfere [1] with these tests: splitting the
index means that two index files are written (the shared base index
and the split '.git/index'), and the same warning message is then
issued twice, failing these tests.
Unset GIT_TEST_SPLIT_INDEX in this test script to avoid such
interference.
[1] There is no such interference at the moment, because, alas,
GIT_TEST_SPLIT_INDEX=1 is broken and never split the index. There
was no such interference in the past (before it broke) either,
because the first index write with GIT_TEST_SPLIT_INDEX=1 never
split the index, only the second write did. A subsequent commit
fixing GIT_TEST_SPLIT_INDEX will have all the details on this.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a helper function in the 't1600-index.sh' test script the stderr
of a 'git add' command is redirected to its stdout, but its stdout is
not redirected anywhere. So apparently this redirection is
unnecessary, remove it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ds/sparse-index-ignored-files:
sparse-checkout: clear tracked sparse dirs
sparse-index: add SPARSE_INDEX_MEMORY_ONLY flag
attr: be careful about sparse directories
sparse-checkout: create helper methods
sparse-index: use WRITE_TREE_MISSING_OK
sparse-index: silently return when cache tree fails
unpack-trees: fix nested sparse-dir search
sparse-index: silently return when not using cone-mode patterns
t7519: rewrite sparse index test
When changing the scope of a sparse-checkout using cone mode, we might
have some tracked directories go out of scope. The current logic removes
the tracked files from within those directories, but leaves the ignored
files within those directories. This is a bit unexpected to users who
have given input to Git saying they don't need those directories
anymore.
This is something that is new to the cone mode pattern type: the user
has explicitly said "I want these directories and _not_ those
directories." The typical sparse-checkout patterns more generally apply
to "I want files with with these patterns" so it is natural to leave
ignored files as they are. This focus on directories in cone mode
provides us an opportunity to change the behavior.
Leaving these ignored files in the sparse directories makes it
impossible to gain performance benefits in the sparse index. When we
track into these directories, we need to know if the files are ignored
or not, which might depend on the _tracked_ .gitignore file(s) within
the sparse directory. This depends on the indexed version of the file,
so the sparse directory must be expanded.
We must take special care to look for untracked, non-ignored files in
these directories before deleting them. We do not want to delete any
meaningful work that the users were doing in those directories and
perhaps forgot to add and commit before switching sparse-checkout
definitions. Since those untracked files might be code files that
generated ignored build output, also do not delete any ignored files
from these directories in that case. The users can recover their state
by resetting their sparse-checkout definition to include that directory
and continue. Alternatively, they can see the warning that is presented
and delete the directory themselves to regain the performance they
expect.
By deleting the sparse directories when changing scope (or running 'git
sparse-checkout reapply') we regain these performance benefits as if the
repository was in a clean state.
Since these ignored files are frequently build output or helper files
from IDEs, the users should not need the files now that the tracked
files are removed. If the tracked files reappear, then they will have
newer timestamps than the build artifacts, so the artifacts will need to
be regenerated anyway.
Use the sparse-index as a data structure in order to find the sparse
directories that can be safely deleted. Re-expand the index to a full
one if it was full before.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The convert_to_sparse() method checks for the GIT_TEST_SPARSE_INDEX
environment variable or the "index.sparse" config setting before
converting the index to a sparse one. This is for ease of use since all
current consumers are preparing to compress the index before writing it
to disk. If these settings are not enabled, then convert_to_sparse()
silently returns without doing anything.
We will add a consumer in the next change that wants to use the sparse
index as an in-memory data structure, regardless of whether the on-disk
format should be sparse.
To that end, create the SPARSE_INDEX_MEMORY_ONLY flag that will skip
these config checks when enabled. All current consumers are modified to
pass '0' in the new 'flags' parameter.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we integrate the sparse index into more builtins, we occasionally
need to check the sparse-checkout patterns to see if a path is within
the sparse-checkout cone. Create some helper methods that help
initialize the patterns and check for pattern matching to make this
easier.
The existing callers of commands like get_sparse_checkout_patterns() use
a custom 'struct pattern_list' that is not necessarily the one in the
'struct index_state', so there are not many previous uses that could
adopt these helpers. There are just two in builtin/add.c and
sparse-index.c that can use path_in_sparse_checkout().
We add a path_in_cone_mode_sparse_checkout() as well that will only
return false if the path is outside of the sparse-checkout definition
_and_ the sparse-checkout patterns are in cone mode.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When updating the cache tree in convert_to_sparse(), the
WRITE_TREE_MISSING_OK flag indicates that trees might be computed that
do not already exist within the object database. This happens in cases
such as 'git add' creating new trees that it wants to store in
anticipation of a following 'git commit'. If this flag is not specified,
then it might trigger a promisor fetch or a failure due to the object
not existing locally.
Use WRITE_TREE_MISSING_OK during convert_to_sparse() to avoid these
possible reasons for the cache_tree_update() to fail.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If cache_tree_update() returns a non-zero value, then it could not
create the cache tree. This is likely due to a path having a merge
conflict. Since we are already returning early, let's return silently to
avoid making it seem like we failed to write the index at all.
If we remove our dependence on the cache tree within
convert_to_sparse(), then we could still recover from this scenario and
have a sparse index.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The iterated search in find_cache_entry() was recently modified to
include a loop that searches backwards for a sparse directory entry that
matches the given traverse_info and name_entry. However, the string
comparison failed to actually concatenate those two strings, so this
failed to find a sparse directory when it was not a top-level directory.
This caused some errors in rare cases where a 'git checkout' spanned a
diff that modified files within the sparse directory entry, but we could
not correctly find the entry.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While the sparse-index is only enabled when core.sparseCheckoutCone is
also enabled, it is possible for the user to modify the sparse-checkout
file manually in a way that does not match cone-mode patterns. In this
case, we should refuse to convert an index into a sparse index, since
the sparse_checkout_patterns will not be initialized with recursive and
parent path hashsets.
Also silently return if there are no cache entries, which is a simple
case: there are no paths to make sparse!
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse index is tested with the FS Monitor hook and extension since
f8fe49e (fsmonitor: integrate with sparse index, 2021-07-14). This test
was very fragile because it shared an index across sparse and non-sparse
behavior. Since that expansion and contraction could cause the index to
lose its FS Monitor bitmap and token, behavior is fragile to changes in
'git sparse-checkout set'.
Rewrite the test to use two clones of the original repo: full and
sparse. This allows us to also keep the test files (actual, expect,
trace2.txt) out of the repos we are testing with 'git status'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a performance regression introduced in a587b5a786 (pack-write.c:
extract 'write_rev_file_order', 2021-03-30) and stop needlessly
allocating the "pack_order" array and sorting it with
"pack_order_cmp()", only to throw that work away when we discover that
we're not writing *.rev files after all.
This redundant work was not present in the original version of this
code added in 8ef50d9958 (pack-write.c: prepare to write 'pack-*.rev'
files, 2021-01-25). There we'd call write_rev_file() from
e.g. finish_tmp_packfile(), but we'd "return NULL" early in
write_rev_file() if not doing a "WRITE_REV" or "WRITE_REV_VERIFY".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function to add the `exec` commands to the todo list only needed to
be public API because it was not only used internally by the sequencer,
but also by `git rebase --preserve-merges`.
Now that that mode has been removed, we no longer need that function to
be scoped publicly.
Helped-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We no longer support `--preserve-merges`, therefore it does not make
sense to keep mentioning that option, even in code comments.
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we no longer have a `--preserve-merges` backend, this comment
needs to be adjusted.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already passed the `--rebase-merges` option to `git rebase` instead,
now we make this move permanent.
As pointed out by Ævar Arnfjörð Bjarmason, in contrast to the
deprecation of `git rebase`'s `--preserve-merges` backend, `git svn`
only deprecated this option in v2.25.0 (because this developer missed
`git svn`'s use of that backend when deprecating the rebase backend
running up to Git v2.22).
Still, v2.25.0 has been released on January 13th, 2020. In other words,
`git svn` deprecated this option over one and a half years ago, _and_
has been redirecting to the `--rebase-merges` option during all that
time (read: `git svn rebase --preserve-merges` didn't do _precisely_
what the user asked, since v2.25.0, anyway, it fell back to pretending
that the user asked for `git svn rebase --rebase-merges` instead).
It is time to act on that deprecation and remove that option after all.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option was deprecated in favor of `--rebase-merges` some time ago,
and now we retire it.
To assist users to transition away, we do not _actually_ remove the
option, but now we no longer implement the functionality. Instead, we
offer a helpful error message suggesting which option to use.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for `git-rebase--preserve-merges.sh` entering its after
life, we remove this (deprecated) option that would still rely on it.
To help users transition who still did not receive the memo about the
deprecation, we offer a helpful error message instead of throwing our
hands in the air and saying that we don't know that option, never heard
of it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This backend has been deprecated in favor of `git rebase
--rebase-merges`.
In preparation for dropping it, let's remove all the regression tests
that would need it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We ignore them silently, but it actually makes sense to warn the users
that their config setting has no effect.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even if those tests try to override that setting, let's not use it
because it is deprecated: let's use `merges` instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back when a1be47e4 (hash-object: fix buffer reuse with --path in a
subdirectory, 2017-03-20) was written, the prefix_filename() helper
used a static piece of memory to the caller, making the caller
responsible for copying it, if it wants to keep it across another
call to the same function. Two callers of the prefix_filename() in
hash-object were made to xstrdup() the value obtained from it.
But in the same series, when e4da43b1 (prefix_filename: return newly
allocated string, 2017-03-20) changed the rule to gave the caller
possession of the memory, we forgot to revert one of the xstrdup()
changes, allowing the returned value to leak.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git bugreport writes bug report to the current directory by default,
instead of repository root.
Fix the documentation.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script was added in f28ac70f48 (Move all dashed-form commands to
libexecdir, 2007-11-28) when commands such as "git-add" lived in the
bin directory, instead of the git exec directory.
This notice helped someone incorrectly installing version v1.6.0 and
later into a directory built for a pre-v1.6.0 git version.
We're now long past the point where anyone who'd be helped by this
warning is likely to be doing that, so let's just remove this check
and warning to simplify the Makefile.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in my c95e3a3f0b (send-email: move trivial config
handling to Perl, 2021-05-28) where we'd pick the first config key out
of multiple defined ones, instead of using the normal "last key wins"
semantics of "git config --get".
This broke e.g. cases where a .git/config would have a different
sendemail.smtpServer than ~/.gitconfig. We'd pick the ~/.gitconfig
over .git/config, instead of preferring the repository-local
version. The same would go for /etc/gitconfig etc.
The full list of impacted config keys (the %config_settings values
which are references to scalars, not arrays) is:
sendemail.smtpencryption
sendemail.smtpserver
sendemail.smtpserverport
sendemail.smtpuser
sendemail.smtppass
sendemail.smtpdomain
sendemail.smtpauth
sendemail.smtpbatchsize
sendemail.smtprelogindelay
sendemail.tocmd
sendemail.cccmd
sendemail.aliasfiletype
sendemail.envelopesender
sendemail.confirm
sendemail.from
sendemail.assume8bitencoding
sendemail.composeencoding
sendemail.transferencoding
sendemail.sendmailcmd
I.e. having any of these set in say ~/.gitconfig and in-repo
.git/config regressed in v2.33.0 to prefer the --global one over the
--local.
To test this add a test of config priority to one of these config
variables, most don't have tests at all, but there was an existing one
for sendemail.8bitEncoding.
The "git config" (instead of "test_config") is somewhat of an
anti-pattern, but follows established conventions in
t9001-send-email.sh, likewise with any other pattern or idiom in this
test.
The populating of home/.gitconfig and setting of HOME= is copied from
a test in t0017-env-helper.sh added in 1ff750b128 (tests: make
GIT_TEST_GETTEXT_POISON a boolean, 2019-06-21). This test fails
without this bugfix, but now it works.
Reported-by: Eli Schwartz <eschwartz@archlinux.org>
Tested-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
output() reuses the same struct diff_options for multiple calls of
diff_flush(). Set the option no_free to instruct it to keep the
ignore regexes between calls and release them explicitly at the end.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes 19b2517f (diff-merges: move specific diff-index "-m"
handling to diff-index, 2021-05-21).
That commit disabled handling of all diff for merges options in
diff-index on an assumption that they are unused. However, it later
appeared that -c and --cc, even though undocumented and not being
covered by tests, happen to have had particular effect on diff-index
output.
Restore original -c/--cc options handling by diff-index.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 2f732bf15e (tr2: log parent process name, 2021-07-21) we started
logging parent process names, but only logged all parents on Windows.
on Linux only the name of the immediate parent process was logged.
Extend the functionality added there to also log full parent chain on
Linux.
This requires us to lookup "/proc/<getppid()>/stat" instead of
"/proc/<getppid()>/comm". The "comm" file just contains the name of the
process, but the "stat" file has both that information, and the parent
PID of that process, see procfs(5). We parse out the parent PID of our
own parent, and recursively walk the chain of "/proc/*/stat" files all
the way up the chain. A parent PID of 0 indicates the end of the
chain.
It's possible given the semantics of Linux's PID files that we end up
getting an entirely nonsensical chain of processes. It could happen if
e.g. we have a chain of processes like:
1 (init) => 321 (bash) => 123 (git)
Let's assume that "bash" was started a while ago, and that as shown
the OS has already cycled back to using a lower PID for us than our
parent process. In the time it takes us to start up and get to
trace2_collect_process_info(TRACE2_PROCESS_INFO_STARTUP) our parent
process might exit, and be replaced by an entirely different process!
We'd racily look up our own getppid(), but in the meantime our parent
would exit, and Linux would have cycled all the way back to starting
an entirely unrelated process as PID 321.
If that happens we'll just silently log incorrect data in our ancestry
chain. Luckily we don't need to worry about this except in this
specific cycling scenario, as Linux does not have PID
randomization. It appears it once did through a third-party feature,
but that it was removed around 2006[1]. For anyone worried about this
edge case raising PID_MAX via "/proc/sys/kernel/pid_max" will mitigate
it, but not eliminate it.
One thing we don't need to worry about is getting into an infinite
loop when walking "/proc/*/stat". See 353d3d77f4 (trace2: collect
Windows-specific process information, 2019-02-22) for the related
Windows code that needs to deal with that, and [2] for an explanation
of that edge case.
Aside from potential race conditions it's also a bit painful to
correctly parse the process name out of "/proc/*/stat". A simpler
approach is to use fscanf(), see [3] for an implementation of that,
but as noted in the comment being added here it would fail in the face
of some weird process names, so we need our own parse_proc_stat() to
parse it out.
With this patch the "ancestry" chain for a trace2 event might look
like this:
$ GIT_TRACE2_EVENT=/dev/stdout ~/g/git/git version | grep ancestry | jq -r .ancestry
[
"bash",
"screen",
"systemd"
]
And in the case of naughty process names like the following. This uses
perl's ability to use prctl(PR_SET_NAME, ...). See
Perl/perl5@7636ea95c5 (Set the legacy process name with prctl() on
assignment to $0 on Linux, 2010-04-15)[4]:
$ perl -e '$0 = "(naughty\nname)"; system "GIT_TRACE2_EVENT=/dev/stdout ~/g/git/git version"' | grep ancestry | jq -r .ancestry
[
"sh",
"(naughty\nname)",
"bash",
"screen",
"systemd"
]
1. https://grsecurity.net/news#grsec2110
2. https://lore.kernel.org/git/48a62d5e-28e2-7103-a5bb-5db7e197a4b9@jeffhostetler.com/
3. https://lore.kernel.org/git/87o8agp29o.fsf@evledraar.gmail.com/
4. 7636ea95c5
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code added in 2f732bf15e (tr2: log parent process name,
2021-07-21) to use a switch statement without a "default" branch to
have the compiler error if this code ever drifts out of sync with the
members of the "enum trace2_process_info_reason".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a subsequent commit I'll be replacing most of this code to log N
parents, but let's first fix bugs introduced in the recent
2f732bf15e (tr2: log parent process name, 2021-07-21).
It was using the strbuf_read_file() in the wrong way, its return value
is either a length or a negative value on error. If we didn't have a
procfs, or otherwise couldn't access it we'd end up pushing an empty
string to the trace2 ancestry array.
It was also using the strvec_push() API the wrong way. That API always
does an xstrdup(), so by detaching the strbuf here we'd leak
memory. Let's instead pass in our pointer for strvec_push() to
xstrdup(), and then free our own strbuf. I do have some WIP changes to
make strvec_push_nodup() non-static, which makes this and some other
callsites nicer, but let's just follow the prevailing pattern of using
strvec_push() for now.
We'll also need to free that "procfs_path" strbuf whether or not
strbuf_read_file() succeeds, which was another source of memory leaks
in 2f732bf15e, i.e. we'd leak that memory as well if we weren't on a
system where we could read the file from procfs.
Let's move all the freeing of the memory to the end of the
function. If we're still at STRBUF_INIT with "name" due to not having
taken the branch where the strbuf_read_file() succeeds freeing it is
redundant. So we could move it into the body of the "if", but just
handling freeing the same way for all branches of the function makes
it more readable.
In combination with the preceding commit this makes all of
t[0-9]*trace2*.sh pass under SANITIZE=leak on Linux.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak introduced in ee4512ed48 (trace2: create new
combined trace facility, 2019-02-22), we were doing a free() of other
memory allocated in tr2tls_create_self(), but not the "thread_name"
"struct strbuf".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite a comment added in 2f732bf15e (tr2: log parent process name,
2021-07-21) to describe what we might do under
TRACE2_PROCESS_INFO_EXIT in the future, instead of vaguely referring
to "something extra".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I'm fairly sure that there is no way on Linux to inspect the process
tree without using procfs, any tool such as ps(1), top(1) etc. that
shows this sort of information ultimately looks the information up in
procfs.
So let's remove this comment added in 2f732bf15e (tr2: log parent
process name, 2021-07-21), it's setting us up for an impossible task.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "unbundle" command added in 2e0afafebd (Add git-bundle: move
objects and references by archive, 2007-02-22) did not show progress
output, even though the underlying API learned how to show progress in
be042aff24 (Teach progress eye-candy to fetch_refs_from_bundle(),
2011-09-18).
Now we'll show "Unbundling objects" using the new --progress-title
option to "git index-pack", to go with its existing "Receiving
objects" and "Indexing objects" (which it shows when invoked with
"--stdin", and with a pack file, respectively).
Unlike "git bundle create" we don't handle "--quiet" here, nor
"--all-progress" and "--all-progress-implied". Those are all specific
to "create" (and "verify", in the case of "--quiet").
The structure of the existing documentation is a bit unclear, e.g. the
documentation for the "--quiet" option added in
79862b6b77 (bundle-create: progress output control, 2019-11-10) only
describes how it works for "create", and not for "verify". That and
other issues in it should be fixed, but I'd like to avoid untangling
that mess right now. Let's just support the standard "--no-progress"
implicitly here, and leave cleaning up the general behavior of "git
bundle" for a later change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --progress-title option to index-pack, when data is piped into
index-pack its progress is a proxy for whatever's feeding it data.
This option will allow us to set a more relevant progress bar title in
"git bundle unbundle", and is also used in my "bundle-uri" RFC
patches[1] by a new caller in fetch-pack.c.
The code change in cmd_index_pack() won't handle
"--progress-title=xyz", only "--progress-title xyz", and the "(i+1)"
style (as opposed to "i + 1") is a bit odd.
Not using the "--long-option=value" style is inconsistent with
existing long options handled by cmd_index_pack(), but makes the code
that needs to call it better (two strvec_push(), instead of needing a
strvec_pushf()). Since the option is internal-only the inconsistency
shouldn't matter.
I'm copying the pattern to handle it as-is from the handling of the
existing "-o" option in the same function, see 9cf6d3357a (Add
git-index-pack utility, 2005-10-12) for its addition. That's a short
option, but the code to implement the two is the same in functionality
and style. Eventually we'd like to migrate all of this this to
parse_options(), which would make these differences in behavior go
away.
1. https://lore.kernel.org/git/RFC-cover-00.13-0000000000-20210805T150534Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the "flags" parameter was added in be042aff24 (Teach progress
eye-candy to fetch_refs_from_bundle(), 2011-09-18) there's never been
more than the one flag: BUNDLE_VERBOSE.
Let's have the only caller who cares about that pass "-v" itself
instead through new "extra_index_pack_args" parameter. The flexibility
of being able to pass arbitrary arguments to "unbundle" will be used
in a subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing mechanism for scheduling background maintenance is done
through cron. On Linux systems managed by systemd, systemd provides an
alternative to schedule recurring tasks: systemd timers.
The main motivations to implement systemd timers in addition to cron
are:
* cron is optional and Linux systems running systemd might not have it
installed.
* The execution of `crontab -l` can tell us if cron is installed but not
if the daemon is actually running.
* With systemd, each service is run in its own cgroup and its logs are
tagged by the service inside journald. With cron, all scheduled tasks
are running in the cron daemon cgroup and all the logs of the
user-scheduled tasks are pretended to belong to the system cron
service.
Concretely, a user that doesn’t have access to the system logs won’t
have access to the log of their own tasks scheduled by cron whereas
they will have access to the log of their own tasks scheduled by
systemd timer.
Although `cron` attempts to send email, that email may go unseen by
the user because these days, local mailboxes are not heavily used
anymore.
In order to schedule git maintenance, we need two unit template files:
* ~/.config/systemd/user/git-maintenance@.service
to define the command to be started by systemd and
* ~/.config/systemd/user/git-maintenance@.timer
to define the schedule at which the command should be run.
Those units are templates that are parameterized by the frequency.
Based on those templates, 3 timers are started:
* git-maintenance@hourly.timer
* git-maintenance@daily.timer
* git-maintenance@weekly.timer
The command launched by those three timers are the same as with the
other scheduling methods:
/path/to/git for-each-repo --exec-path=/path/to
--config=maintenance.repo maintenance run --schedule=%i
with the full path for git to ensure that the version of git launched
for the scheduled maintenance is the same as the one used to run
`maintenance start`.
The timer unit contains `Persistent=true` so that, if the computer is
powered down when a maintenance task should run, the task will be run
when the computer is back powered on.
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on the system, different schedulers can be used to schedule
the hourly, daily and weekly executions of `git maintenance run`:
* `launchctl` for MacOS,
* `schtasks` for Windows and
* `crontab` for everything else.
`git maintenance run` now has an option to let the end-user explicitly
choose which scheduler he wants to use:
`--scheduler=auto|crontab|launchctl|schtasks`.
When `git maintenance start --scheduler=XXX` is run, it not only
registers `git maintenance run` tasks in the scheduler XXX, it also
removes the `git maintenance run` tasks from all the other schedulers to
ensure we cannot have two schedulers launching concurrent identical
tasks.
The default value is `auto` which chooses a suitable scheduler for the
system.
`git maintenance stop` doesn't have any `--scheduler` parameter because
this command will try to remove the `git maintenance run` tasks from all
the available schedulers.
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current implementation of `xdg_config_home(filename)` returns
`$XDG_CONFIG_HOME/git/$filename`, with the `git` subdirectory inserted
between the `XDG_CONFIG_HOME` environment variable and the parameter.
This patch introduces a `xdg_config_home_for(subdir, filename)` function
which is more generic. It only concatenates "$XDG_CONFIG_HOME", or
"$HOME/.config" if the former isn’t defined, with the parameters,
without adding `git` in between.
`xdg_config_home(filename)` is now implemented by calling
`xdg_config_home_for("git", filename)` but this new generic function can
be used to compute the configuration directory of other programs.
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'debug' function in test-lib-functions.sh is used to invoke a
debugger at a specific line in a test. It inherits the value of HOME and
TERM set by 'test-lib.sh': HOME="$TRASH_DIRECTORY" and TERM=dumb.
Changing the value of HOME means that any customization configured in a
developers' debugger configuration file (like $HOME/.gdbinit or
$HOME/.lldbinit) are not available in the debugger invoked by
'test_pause'.
Changing the value of TERM to 'dumb' means that colored output
is disabled in the debugger.
To make the debugging experience with 'debug' more pleasant, leverage
the variable USER_HOME, added in the previous commit, to copy a
developer's ~/.gdbinit and ~/.lldbinit to the test HOME. We do not set
HOME to USER_HOME as in 'test_pause' to avoid user configuration in
$USER_HOME/.gitconfig from interfering with the command being debugged.
Also, add a flag to launch the debugger with the original value of
TERM, and add the same warning as for 'test_pause'.
Helped-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'test_pause' function, which is designed to help interactive
debugging and exploration of tests, currently inherits the value of HOME
and TERM set by 'test-lib.sh': HOME="$TRASH_DIRECTORY" and TERM=dumb. It
also invokes the shell defined by TEST_SHELL_PATH, which defaults to
/bin/sh (through SHELL_PATH).
Changing the value of HOME means that any customization configured in a
developers' shell startup files and any Git aliases defined in their
global Git configuration file are not available in the shell invoked by
'test_pause'.
Changing the value of TERM to 'dumb' means that colored output
is disabled for all commands in that shell.
Using /bin/sh as the shell invoked by 'test_pause' is not ideal since
some platforms (i.e. Debian and derivatives) use Dash as /bin/sh, and
this shell is usually compiled without readline support, which makes for
a poor interactive command line experience.
To make the interactive command line experience in the shell invoked by
'test_pause' more pleasant, save the values of HOME and TERM in
USER_HOME and USER_TERM before changing them in test-lib.sh, and add
options to 'test_pause' to optionally use these variables to invoke the
shell. Also add an option to invoke SHELL instead of TEST_SHELL_PATH, so
that developer's interactive shell is used.
We use options instead of changing the behaviour unconditionally since
these three variables can slightly change command behaviour. Moreover,
using the original HOME means commands could overwrite files in a user's
home directory. Be explicit about these caveats in the new 'Usage'
section in test-lib-functions.sh.
Finally, add '[options]' to the test_pause synopsys in t/README, and
mention that the full list of helper functions and their options can be
found in test-lib-functions.sh.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
3f824e91c8 (t/Makefile: introduce TEST_SHELL_PATH, 2017-12-08)
made it easy to use a different shell for the tests than 'SHELL_PATH'
used at compile time. But 'test_pause' still invokes 'SHELL_PATH'.
If TEST_SHELL_PATH is set, invoke that shell in 'test_pause' for
consistency.
Suggested-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add $(INSTALL_STRIP), which allows passing stripping options to
$(INSTALL).
For this to work, installing executables must be split to installing
compiled binaries and scripts portions, since $(INSTALL_STRIP) is only
meaningful to the former.
Users can set this variable depending on their system. For example,
Linux users can use `-s --strip-program=strip`, while FreeBSD users can
simply set to `-s` and choose strip program with $STRIPBIN.
[original outline by Đoàn Trần Công Danh]
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ll_binary_merge() function assumes that the ancestor blob is
different from either side of the new versions, and always fails
the merge in conflict, unless -Xours or -Xtheirs is in effect.
The normal "merge" machineries all resolve the trivial cases
(e.g. if our side changed while their side did not, the result
is ours) without triggering the file-level merge drivers, so the
assumption is warranted.
The code path in "git apply --3way", however, does not check for
the trivial three-way merge situation and always calls the
file-level merge drivers. This used to be perfectly OK back
when we always first attempted a straight patch application and
used the three-way code path only as a fallback. Any binary
patch that can be applied as a trivial three-way merge (e.g. the
patch is based exactly on the version we happen to have) would
always cleanly apply, so the ll_binary_merge() that is not
prepared to see the trivial case would not have to handle such a
case.
This no longer is true after we made "--3way" to mean "first try
three-way and then fall back to straight application", and made
"git apply -3" on a binary patch that is based on the current
version no longer apply.
Teach "git apply -3" to first check for the trivial merge cases
and resolve them without hitting the file-level merge drivers.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
[jc: stolen tests from Jerry's patch]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update to the command line completion (in contrib/) for tcsh.
* ti/tcsh-completion-regression-fix:
completion: tcsh: Fix regression by drop of wrapper functions
Command line completion updates.
* fc/completion-updates:
completion: bash: add correct suffix in variables
completion: bash: fix for multiple dash commands
completion: bash: fix for suboptions with value
completion: bash: fix prefix detection in branch.*
Various bugs in "git rebase -r" have been fixed.
* pw/rebase-r-fixes:
rebase -r: fix merge -c with a merge strategy
rebase -r: don't write .git/MERGE_MSG when fast-forwarding
rebase -i: add another reword test
rebase -r: make 'merge -c' behave like reword
Checking out all the paths from HEAD during the last conflicted
step in "git rebase" and continuing would cause the step to be
skipped (which is expected), but leaves MERGE_MSG file behind in
$GIT_DIR and confuses the next "git commit", which has been
corrected.
* pw/rebase-skip-final-fix:
rebase --continue: remove .git/MERGE_MSG
rebase --apply: restore some tests
t3403: fix commit authorship
Use upload-artifacts v1 (instead of v2) for 32-bit linux, as the
new version has a blocker bug for that architecture.
* cb/ci-use-upload-artifacts-v1:
ci: use upload-artifacts v1 for dockerized jobs
"git commit --fixup" now works with "--edit" again, after it was
broken in v2.32.
* jk/commit-edit-fixup-fix:
commit: restore --edit when combined with --fixup
The revision traversal API has been optimized by taking advantage
of the commit-graph, when available, to determine if a commit is
reachable from any of the existing refs.
* ps/connectivity-optim:
revision: avoid hitting packfiles when commits are in commit-graph
commit-graph: split out function to search commit position
revision: stop retrieving reference twice
connected: do not sort input revisions
revision: separate walk and unsorted flags
With the codebase firmly C99 compatible and most compilers supporting
newer versions by default, it could help bring visibility to problems.
Reverse the DEVOPTS=pedantic flag to provide a fallback for people stuck
with gcc < 5 or some other compiler that either doesn't support this flag
or has issues with it, and while at it also enable -Wpedantic which used
to be controversial[1] when Apple compilers and clang had widely divergent
version numbers.
Ideally any compiler found to have issues with these flags will be added
to an exception, and indeed, one was added to safely process windows
headers that would use non standard print identifiers, but it is expected
that more will be needed, so it could be considered a weather balloon.
[1] https://lore.kernel.org/git/20181127100557.53891-1-carenas@gmail.com/
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation to building with pedantic mode enabled, change a couple
of places where the current mingw gcc compiler provided with the SDK
reports issues.
A full fix for the incompatible use of (void *) to store function
pointers has been punted, with the minimal change to instead use a
generic function pointer (FARPROC), and therefore the (hopefully)
temporary need to disable incompatible pointer warnings.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the USE_PARENS_AROUND_GETTEXT_N compile-time option which was
meant to catch an inadvertent mistake which is too obscure to
maintain this facility.
The backstory of how USE_PARENS_AROUND_GETTEXT_N came about is: When I
added the N_() macro in 6578483036 (i18n: add no-op _() and N_()
wrappers, 2011-02-22) it was defined as:
#define N_(msgid) (msgid)
This is non-standard C, as was noticed and fixed in 642f85faab (i18n:
avoid parenthesized string as array initializer, 2011-04-07).
I.e. this needed to be defined as:
#define N_(msgid) msgid
Then in e62cd35a3e (i18n: log: mark parseopt strings for translation,
2012-08-20) when "builtin_log_usage" was marked for translation the
string concatenation for passing to usage() added in 1c370ea4e5
(Show usage string for 'git log -h', 'git show -h' and 'git diff -h',
2009-08-06) was faithfully preserved:
- "git log [<options>] [<since>..<until>] [[--] <path>...]\n"
- " or: git show [options] <object>...",
+ N_("git log [<options>] [<since>..<until>] [[--] <path>...]\n")
+ N_(" or: git show [options] <object>..."),
This was then fixed to be the expected array of usage strings in
e66dc0cc4b (log.c: fix translation markings, 2015-01-06) rather than
a string with multiple "\n"-delimited usage strings, and finally in
290c8e7a3f (gettext.h: add parentheses around N_ expansion if
supported, 2015-01-11) USE_PARENS_AROUND_GETTEXT_N was added to ensure
this mistake didn't happen again.
I think that even if this was a N_()-specific issue this
USE_PARENS_AROUND_GETTEXT_N facility wouldn't be worth it, the issue
would be too rare to worry about.
But I also think that 290c8e7a3f which introduced
USE_PARENS_AROUND_GETTEXT_N misattributed the problem. The issue
wasn't with the N_() macro added in e62cd35a3e, but that before the
N_() macro existed in the codebase the initial migration to
parse_options() in 1c370ea4e5 continued passsing in a "\n"-delimited
string, when the new API it was migrating to supported and expected
the passing of an array.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When executing git-update-ref(1) with the `--stdin` flag, then the user
can queue updates and, since e48cf33b61 (update-ref: implement
interactive transaction handling, 2020-04-02), interactively drive the
transaction's state via a set of transactional verbs. This interactivity
is somewhat broken though: while the caller can use these verbs to drive
the transaction's state, the status messages which confirm that a verb
has been processed is not flushed. The caller may thus be left hanging
waiting for the acknowledgement.
Fix the bug by flushing stdout after writing the status update. Add a
test which catches this bug.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In make_remote(), we store the return value of hashmap_put() and check
it using assert(), but don't otherwise use it. If Git is compiled with
NDEBUG, then the assert() becomes a noop, and nobody looks at the
variable at all. This causes some compilers to produce warnings.
Let's switch it instead to a BUG(). This accomplishes the same thing,
but is always compiled in (and we don't have to worry about the cost;
the check is cheap, and this is not a hot code path).
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the trailing dot from the warning we emit about gc.log. It's
common for various terminal UX's to allow the user to select "words",
and by including the trailing dot a user wanting to select the path to
gc.log will need to manually remove the trailing dot.
Such a user would also probably need to adjust the path if it e.g. had
spaces in it, but this should address this very common case.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Suggested-by: Jan Judas <snugar.i@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These new performance tests demonstrate effectively the same behavior as
p5310, but use a multi-pack bitmap instead of a single-pack one.
Notably, p5326 does not create a MIDX bitmap with multiple packs. This
is so we can measure a direct comparison between it and p5310. Any
difference between the two is measuring just the overhead of using MIDX
bitmaps.
Here are the results of p5310 and p5326 together, measured at the same
time and on the same machine (using a Xenon W-2255 CPU):
Test HEAD
------------------------------------------------------------------------
5310.2: repack to disk 96.78(93.39+11.33)
5310.3: simulated clone 9.98(9.79+0.19)
5310.4: simulated fetch 1.75(4.26+0.19)
5310.5: pack to file (bitmap) 28.20(27.87+8.70)
5310.6: rev-list (commits) 0.41(0.36+0.05)
5310.7: rev-list (objects) 1.61(1.54+0.07)
5310.8: rev-list count with blob:none 0.25(0.21+0.04)
5310.9: rev-list count with blob:limit=1k 2.65(2.54+0.10)
5310.10: rev-list count with tree:0 0.23(0.19+0.04)
5310.11: simulated partial clone 4.34(4.21+0.12)
5310.13: clone (partial bitmap) 11.05(12.21+0.48)
5310.14: pack to file (partial bitmap) 31.25(34.22+3.70)
5310.15: rev-list with tree filter (partial bitmap) 0.26(0.22+0.04)
versus the same tests (this time using a multi-pack index):
Test HEAD
------------------------------------------------------------------------
5326.2: setup multi-pack index 78.99(75.29+11.58)
5326.3: simulated clone 11.78(11.56+0.22)
5326.4: simulated fetch 1.70(4.49+0.13)
5326.5: pack to file (bitmap) 28.02(27.72+8.76)
5326.6: rev-list (commits) 0.42(0.36+0.06)
5326.7: rev-list (objects) 1.65(1.58+0.06)
5326.8: rev-list count with blob:none 0.26(0.21+0.05)
5326.9: rev-list count with blob:limit=1k 2.97(2.86+0.10)
5326.10: rev-list count with tree:0 0.25(0.20+0.04)
5326.11: simulated partial clone 5.65(5.49+0.16)
5326.13: clone (partial bitmap) 12.22(13.43+0.38)
5326.14: pack to file (partial bitmap) 30.05(31.57+7.25)
5326.15: rev-list with tree filter (partial bitmap) 0.24(0.20+0.04)
There is slight overhead in "simulated clone", "simulated partial
clone", and "clone (partial bitmap)". Unsurprisingly, that overhead is
due to using the MIDX's reverse index to map between bit positions and
MIDX positions.
This can be reproduced by running "git repack -adb" along with "git
multi-pack-index write --bitmap" in a large-ish repository. Then run:
$ perf record -o pack.perf git -c core.multiPackIndex=false \
pack-objects --all --stdout >/dev/null </dev/null
$ perf record -o midx.perf git -c core.multiPackIndex=true \
pack-objects --all --stdout >/dev/null </dev/null
and compare the two with "perf diff -c delta -o 1 pack.perf midx.perf".
The most notable results are below (the next largest positive delta is
+0.14%):
# Event 'cycles'
#
# Baseline Delta Shared Object Symbol
# ........ ....... .................. ..........................
#
+5.86% git [.] nth_midxed_offset
+5.24% git [.] nth_midxed_pack_int_id
3.45% +0.97% git [.] offset_to_pack_pos
3.30% +0.57% git [.] pack_pos_to_offset
+0.30% git [.] pack_pos_to_midx
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new p5326 introduced by the next patch will want these same tests,
interjecting its own setup in between. Move them out so that both perf
tests can reuse them.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP' environment
variable to also write a multi-pack bitmap when
'GIT_TEST_MULTI_PACK_INDEX' is set.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A number of these tests are focused only on pack-based bitmaps and need
to be updated to disable 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP' where
necessary.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test is specifically about generating a midx still respecting a
pack-based bitmap file. Generating a MIDX bitmap would confuse the test.
Let's override the 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP' variable to
make sure we don't do so.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generating a MIDX bitmap confuses many of the tests in t5310, which
expect to control whether and how bitmaps are written. Since the
relevant MIDX-bitmap tests here are covered already in t5326, let's just
disable the flag for the whole t5310 script.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generating a MIDX bitmap causes tests which repack in a partial clone to
fail because they are missing objects. Missing objects is an expected
component of tests in t0410, so disable this knob altogether. Graceful
degradation when writing a bitmap with missing objects is tested in
t5326.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces a new test, t5326, which tests the basic
functionality of multi-pack bitmaps.
Some trivial behavior is tested, such as:
- Whether bitmaps can be generated with more than one pack.
- Whether clones can be served with all objects in the bitmap.
- Whether follow-up fetches can be served with some objects outside of
the server's bitmap
These use lib-bitmap's tests (which in turn were pulled from t5310), and
we cover cases where the MIDX represents both a single pack and multiple
packs.
In addition, some non-trivial and MIDX-specific behavior is tested, too,
including:
- Whether multi-pack bitmaps behave correctly with respect to the
pack-reuse machinery when the base for some object is selected from
a different pack than the delta.
- Whether multi-pack bitmaps correctly respect the
pack.preferBitmapTips configuration.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subsequent tests will want to check for the existence of a multi-pack
bitmap which matches the multi-pack-index stored in the pack directory.
The multi-pack bitmap includes the hex checksum of the MIDX it
corresponds to in its filename (for example,
'$packdir/multi-pack-index-<checksum>.bitmap'). As a result, some tests
want a way to learn what '<checksum>' is.
This helper addresses that need by printing the checksum of the
repository's multi-pack-index.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'll soon be adding a test script that will cover many of the same
bitmap concepts as t5310, but for MIDX bitmaps. Let's pull out as many
of the applicable tests as we can so we don't have to rewrite them.
There should be no functional change to t5310; we still run the same
operations in the same order.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Write multi-pack bitmaps in the format described by
Documentation/technical/bitmap-format.txt, inferring their presence with
the absence of '--bitmap'.
To write a multi-pack bitmap, this patch attempts to reuse as much of
the existing machinery from pack-objects as possible. Specifically, the
MIDX code prepares a packing_data struct that pretends as if a single
packfile has been generated containing all of the objects contained
within the MIDX.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This prepares the code in pack-bitmap to interpret the new multi-pack
bitmaps described in Documentation/technical/bitmap-format.txt, which
mostly involves converting bit positions to accommodate looking them up
in a MIDX.
Note that there are currently no writers who write multi-pack bitmaps,
and that this will be implemented in the subsequent commit. Note also
that get_midx_checksum() and get_midx_filename() are made non-static so
they can be called from pack-bitmap.c.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
try_partial_reuse() is used to mark any bits in the beginning of a
bitmap whose objects can be reused verbatim from the pack they came
from.
Currently this function returns void, and signals nothing to the caller
when bits could not be reused. But multi-pack bitmaps would benefit from
having such a signal, because they may try to pass objects which are in
bounds, but from a pack other than the preferred one.
Any extra calls are noops because of a conditional in
reuse_partial_packfile_from_bitmap(), but those loop iterations can be
avoided by letting try_partial_reuse() indicate when it can't accept any
more bits for reuse, and then listening to that signal.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a recent commit, pack-objects learned support for the
'pack.preferBitmapTips' configuration. This patch prepares the
multi-pack bitmap code to respect this configuration, too.
The yet-to-be implemented code will find that it is more efficient to
check whether each reference contains a prefix found in the configured
set of values rather than doing an additional traversal.
Implement a function 'bitmap_is_preferred_refname()' which will perform
that check. Its caller will be added in a subsequent patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent patch to support reading MIDX bitmaps will be less noisy
after extracting a generic function to fetch the nth OID contained in
the bitmap.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent patch to support reading MIDX bitmaps will be less noisy
after extracting a generic function to return how many objects are
contained in a bitmap.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Opening multiple instance of the same MIDX can lead to problems like two
separate packed_git structures which represent the same pack being added
to the repository's object store.
The above scenario can happen because prepare_midx_pack() checks if
`m->packs[pack_int_id]` is NULL in order to determine if a pack has been
opened and installed in the repository before. But a caller can
construct two copies of the same MIDX by calling get_multi_pack_index()
and load_multi_pack_index() since the former manipulates the
object store directly but the latter is a lower-level routine which
allocates a new MIDX for each call.
So if prepare_midx_pack() is called on multiple MIDXs with the same
pack_int_id, then that pack will be installed twice in the object
store's packed_git pointer.
This can lead to problems in, for e.g., the pack-bitmap code, which does
something like the following (in pack-bitmap.c:open_pack_bitmap()):
struct bitmap_index *bitmap_git = ...;
for (p = get_all_packs(r); p; p = p->next) {
if (open_pack_bitmap_1(bitmap_git, p) == 0)
ret = 0;
}
which is a problem if two copies of the same pack exist in the
packed_git list because pack-bitmap.c:open_pack_bitmap_1() contains a
conditional like the following:
if (bitmap_git->pack || bitmap_git->midx) {
/* ignore extra bitmap file; we can only handle one */
warning("ignoring extra bitmap file: %s", packfile->pack_name);
close(fd);
return -1;
}
Avoid this scenario by not letting write_midx_internal() open a MIDX
that isn't also pointed at by the object store. So long as this is the
case, other routines should prefer to open MIDXs with
get_multi_pack_index() or reprepare_packed_git() instead of creating
instances on their own. Because get_multi_pack_index() returns
`r->object_store->multi_pack_index` if it is non-NULL, we'll only have
one instance of a MIDX open at one time, avoiding these problems.
To encourage this, drop the `struct multi_pack_index *` parameter from
`write_midx_internal()`, and rely instead on the `object_dir` to find
(or initialize) the correct MIDX instance.
Likewise, replace the call to `close_midx()` with
`close_object_store()`, since we're about to replace the MIDX with a new
one and should invalidate the object store's memory of any MIDX that
might have existed beforehand.
Note that this now forbids passing object directories that don't belong
to alternate repositories over `--object-dir`, since before we would
have happily opened a MIDX in any directory, but now restrict ourselves
to only those reachable by `r->objects->multi_pack_index` (and alternate
MIDXs that we can see by walking the `next` pointer).
As far as I can tell, supporting arbitrary directories with
`--object-dir` was a historical accident, since even the documentation
says `<alt>` when referring to the value passed to this option.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching refs, we are doing two connectivity checks:
- The first one is done such that we can skip fetching refs in the
case where we already have all objects referenced by the updated
set of refs.
- The second one verifies that we have all objects after we have
fetched objects.
We always execute both connectivity checks, but this is wasteful in case
the first connectivity check already notices that we have all objects
locally available.
Skip the second connectivity check in case we already had all objects
available. This gives us a nice speedup when doing a mirror-fetch in a
repository with about 2.3M refs where the fetching repo already has all
objects:
Benchmark #1: HEAD~: git-fetch
Time (mean ± σ): 30.025 s ± 0.081 s [User: 27.070 s, System: 4.933 s]
Range (min … max): 29.900 s … 30.111 s 5 runs
Benchmark #2: HEAD: git-fetch
Time (mean ± σ): 25.574 s ± 0.177 s [User: 22.855 s, System: 4.683 s]
Range (min … max): 25.399 s … 25.765 s 5 runs
Summary
'HEAD: git-fetch' ran
1.17 ± 0.01 times faster than 'HEAD~: git-fetch'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functions `fetch_refs()` and `consume_refs()` must always be called
together such that we first obtain all missing objects and then update
our local refs to match the remote refs. In a subsequent patch, we'll
further require that `fetch_refs()` must always be called before
`consume_refs()` such that it can correctly assert that we have all
objects after the fetch given that we're about to move the connectivity
check.
Make this requirement explicit by merging both functions into a single
`fetch_and_consume_refs()` function.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor `fetch_refs()` code to make it more extendable by explicitly
handling error cases. The refactored code should behave the same.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to negotiate a packfile, we need to dereference refs to see
which commits we have in common with the remote. To do so, we first look
up the object's type -- if it's a tag, we peel until we hit a non-tag
object. If we hit a commit eventually, then we return that commit.
In case the object ID points to a commit directly, we can avoid the
initial lookup of the object type by opportunistically looking up the
commit via the commit-graph, if available, which gives us a slight speed
bump of about 2% in a huge repository with about 2.3M refs:
Benchmark #1: HEAD~: git-fetch
Time (mean ± σ): 31.634 s ± 0.258 s [User: 28.400 s, System: 5.090 s]
Range (min … max): 31.280 s … 31.896 s 5 runs
Benchmark #2: HEAD: git-fetch
Time (mean ± σ): 31.129 s ± 0.543 s [User: 27.976 s, System: 5.056 s]
Range (min … max): 30.172 s … 31.479 s 5 runs
Summary
'HEAD: git-fetch' ran
1.02 ± 0.02 times faster than 'HEAD~: git-fetch'
In case this fails, we fall back to the old code which peels the
objects to a commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The object ID iterator used by the connectivity checks returns the next
object ID via an out-parameter and then uses a return code to indicate
whether an item was found. This is a bit roundabout: instead of a
separate error code, we can just return the next object ID directly and
use `NULL` pointers as indicator that the iterator got no items left.
Furthermore, this avoids a copy of the object ID.
Refactor the iterator and all its implementations to return object IDs
directly. This brings a tiny performance improvement when doing a mirror-fetch of a repository with about 2.3M refs:
Benchmark #1: 328dc58b49919c43897240f2eabfa30be2ce32a4~: git-fetch
Time (mean ± σ): 30.110 s ± 0.148 s [User: 27.161 s, System: 5.075 s]
Range (min … max): 29.934 s … 30.406 s 10 runs
Benchmark #2: 328dc58b49919c43897240f2eabfa30be2ce32a4: git-fetch
Time (mean ± σ): 29.899 s ± 0.109 s [User: 26.916 s, System: 5.104 s]
Range (min … max): 29.696 s … 29.996 s 10 runs
Summary
'328dc58b49919c43897240f2eabfa30be2ce32a4: git-fetch' ran
1.01 ± 0.01 times faster than '328dc58b49919c43897240f2eabfa30be2ce32a4~: git-fetch'
While this 1% speedup could be labelled as statistically insignificant,
the speedup is consistent on my machine. Furthermore, this is an end to
end test, so it is expected that the improvement in the connectivity
check itself is more significant.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When updating local refs after the fetch has transferred all objects, we
do an object existence test as a safety guard to avoid updating a ref to
an object which we don't have. We do so via `oid_object_info()`: if it
returns an error, then we know the object does not exist.
One side effect of `oid_object_info()` is that it parses the object's
type, and to do so it must unpack the object header. This is completely
pointless: we don't care for the type, but only want to assert that the
object exists.
Refactor the code to use `repo_has_object_file()`, which both makes the
code's intent clearer and is also faster because it does not unpack
object headers. In a real-world repo with 2.3M refs, this results in a
small speedup when doing a mirror-fetch:
Benchmark #1: HEAD~: git-fetch
Time (mean ± σ): 33.686 s ± 0.176 s [User: 30.119 s, System: 5.262 s]
Range (min … max): 33.512 s … 33.944 s 5 runs
Benchmark #2: HEAD: git-fetch
Time (mean ± σ): 31.247 s ± 0.195 s [User: 28.135 s, System: 5.066 s]
Range (min … max): 30.948 s … 31.472 s 5 runs
Summary
'HEAD: git-fetch' ran
1.08 ± 0.01 times faster than 'HEAD~: git-fetch'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When updating our local refs based on the refs fetched from the remote,
we need to iterate through all requested refs and load their respective
commits such that we can determine whether they need to be appended to
FETCH_HEAD or not. In cases where we're fetching from a remote with
exceedingly many refs, resolving these refs can be quite expensive given
that we repeatedly need to unpack object headers for each of the
referenced objects.
Speed this up by opportunistically trying to resolve object IDs via the
commit graph. We only do so for any refs which are not in "refs/tags":
more likely than not, these are going to be a commit anyway, and this
lets us avoid having to unpack object headers completely in case the
object is a commit that is part of the commit-graph. This significantly
speeds up mirror-fetches in a real-world repository with
2.3M refs:
Benchmark #1: HEAD~: git-fetch
Time (mean ± σ): 56.482 s ± 0.384 s [User: 53.340 s, System: 5.365 s]
Range (min … max): 56.050 s … 57.045 s 5 runs
Benchmark #2: HEAD: git-fetch
Time (mean ± σ): 33.727 s ± 0.170 s [User: 30.252 s, System: 5.194 s]
Range (min … max): 33.452 s … 33.871 s 5 runs
Summary
'HEAD: git-fetch' ran
1.67 ± 0.01 times faster than 'HEAD~: git-fetch'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a repository has at least one alternate, the MIDX belonging to each
alternate is accessed through the `next` pointer on the main object
store's copy of the MIDX. close_midx() didn't bother to close any
of the linked MIDXs. It likewise didn't free the memory pointed to by
`m`, leaving uninitialized bytes with live pointers to them left around
in the heap.
Clean this up by closing linked MIDXs, and freeing up the memory pointed
to by each of them. When callers call close_midx(), then they can
discard the entire linked list of MIDXs and set their pointer to the
head of that list to NULL.
This isn't strictly required for the upcoming patches, but it makes it
much more difficult (though still possible, for e.g., by calling
`close_midx(m->next)` which leaves `m->next` pointing at uninitialized
bytes) to have pointers to uninitialized memory.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 9218c6a40c (midx: allow marking a pack as preferred, 2021-03-30), the
multi-pack index code learned how to select a pack which all duplicate
objects are selected from. That is, if an object appears in multiple
packs, select the copy in the preferred pack before breaking ties
according to the other rules like pack mtime and readdir() order.
Not specifying a preferred pack can cause serious problems with
multi-pack reachability bitmaps, because these bitmaps rely on having at
least one pack from which all duplicates are selected. Not having such a
pack causes problems with the code in pack-objects to reuse packs
verbatim (e.g., that code assumes that a delta object in a chunk of pack
sent verbatim will have its base object sent from the same pack).
So why does not marking a pack preferred cause problems here? The reason
is roughly as follows:
- Ties are broken (when handling duplicate objects) by sorting
according to midx_oid_compare(), which sorts objects by OID,
preferred-ness, pack mtime, and finally pack ID (more on that
later).
- The psuedo pack-order (described in
Documentation/technical/pack-format.txt under the section
"multi-pack-index reverse indexes") is computed by
midx_pack_order(), and sorts by pack ID and pack offset, with
preferred packs sorting first.
- But! Pack IDs come from incrementing the pack count in
add_pack_to_midx(), which is a callback to
for_each_file_in_pack_dir(), meaning that pack IDs are assigned in
readdir() order.
When specifying a preferred pack, all of that works fine, because
duplicate objects are correctly resolved in favor of the copy in the
preferred pack, and the preferred pack sorts first in the object order.
"Sorting first" is critical, because the bitmap code relies on finding
out which pack holds the first object in the MIDX's pseudo pack-order to
determine which pack is preferred.
But if we didn't specify a preferred pack, and the pack which comes
first in readdir() order does not also have the lowest timestamp, then
it's possible that that pack (the one that sorts first in pseudo-pack
order, which the bitmap code will treat as the preferred one) did *not*
have all duplicate objects resolved in its favor, resulting in breakage.
The fix is simple: pick a (semi-arbitrary, non-empty) preferred pack
when none was specified. This forces that pack to have duplicates
resolved in its favor, and (critically) to sort first in pseudo-pack
order. Unfortunately, testing this behavior portably isn't possible,
since it depends on readdir() order which isn't guaranteed by POSIX.
(Note that multi-pack reachability bitmaps have yet to be implemented;
so in that sense this patch is fixing a bug which does not yet exist.
But by having this patch beforehand, we can prevent the bug from ever
materializing.)
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The soon-to-be-implemented multi-pack bitmap treats object in the first
bit position specially by assuming that all objects in the pack it was
selected from are also represented from that pack in the MIDX. In other
words, the pack from which the first object was selected must also have
all of its other objects selected from that same pack in the MIDX in
case of any duplicates.
But this assumption relies on the fact that there is at least one object
in that pack to begin with; otherwise the object in the first bit
position isn't from a preferred pack, in which case we can no longer
assume that all objects in that pack were also selected from the same
pack.
Guard this assumption by checking the number of objects in the given
preferred pack, and failing if the given pack is empty.
To make sure we can safely perform this check, open any packs which are
contained in an existing MIDX via prepare_midx_pack(). The same is done
for new packs via the add_pack_to_midx() callback, but packs picked up
from a previous MIDX will not yet have these opened.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a new multi-pack index, write_midx_internal() attempts to
clean up any auxiliary files (currently just the MIDX's `.rev` file, but
soon to include a `.bitmap`, too) corresponding to the MIDX it's
replacing.
This step should happen after the new MIDX is written into place, since
doing so beforehand means that the old MIDX could be read without its
corresponding .rev file.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If using --object-dir to point into an object directory which belongs to
a different repository than the one in the current working directory,
such as:
git init repo
git -C repo ... # add some objects
cd alternate
git multi-pack-index --object-dir ../repo/.git/objects write
the binary will segfault trying to access the object-dir via the repo it
found, but that's not fully initialized. Worse, if we later call
clear_midx_files_ext(), we will use `the_repository` and remove files
out of the wrong object directory.
Fix this by using the given object_dir (or the object directory of
`the_repository` if `--object-dir` wasn't given) to properly to clean up
the *.rev files, avoiding the crash.
Original-patch-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The multi-pack-index command supports working with arbitrary object
directories via the `--object-dir` flag. Though this has historically
worked in arbitrary repositories (including when the command itself was
run outside of a Git repository), this has been somewhat of an accident.
For example, running:
git multi-pack-index write --object-dir=/path/to/repo/objects
outside of a Git repository causes a BUG(). This is because the
top-level `cmd_multi_pack_index()` function stops parsing when it sees
"write", and then fills in the default object directory (the result of
calling `get_object_directory()`) before handing off to
`cmd_multi_pack_index_write()`. But there is no repository to
initialize, and so calling `get_object_directory()` results in a BUG()
(indicating that the current repository is not initialized).
Another case where this doesn't quite work as expected is when operating
in a SHA-256 repository. To see the failure, try this in your shell:
git init --object-format=sha256 repo
git -C repo commit --allow-empty base
git -C repo repack -d
git multi-pack-index --object-dir=$(pwd)/repo/.git/objects write
and observe that we cannot open the `.idx` file in "repo", because the
outermost process assumes that any repository that it works in also uses
the default value of `the_hash_algo` (at the time of writing, SHA-1).
There may be compelling reasons for trying to work around these bugs,
but working in arbitrary `--object-dir`'s is non-standard enough (and
likewise, these bugs prevalent enough) that I don't think any workflows
would be broken by abandoning this behavior.
Accordingly, restrict the `multi-pack-index` builtin to only work when
inside of a Git repository (i.e., its main utility becomes selecting
which alternate to operate in), which avoids both of the bugs above.
(Note that you can still trigger a bug when writing a MIDX in an
alternate which does not use the same object format as the repository
which it is an alternate of, but that is an unrelated bug to this one).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In both protocol v0 and v2, upload-pack writes one pktline packet per
advertised ref to stdout. That means one or two write(2) syscalls per
ref. This is problematic if these writes become network sends with
high overhead.
This commit changes both send_ref callbacks to use buffered IO using
stdio.
To give an example of the impact: I set up a single-threaded loop that
calls ls-remote (with HTTP and protocol v2) on a local GitLab
instance, on a repository with 11K refs. When I switch from Git
v2.32.0 to this patch, I see a 40% reduction in CPU time for Git, and
65% for Gitaly (GitLab's Git RPC service).
So using buffered IO not only saves syscalls in upload-pack, it also
saves time in things that consume upload-pack's output.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jacob Vosmaer <jacob@gitlab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds three new functions to pkt-line.c: packet_fwrite,
packet_fwrite_fmt and packet_fflush. Besides writing a pktline flush
packet, packet_fflush also flushes the stdio buffer of the stream.
Helped-by: Patrick Steinhardt <ps@pks.im>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jacob Vosmaer <jacob@gitlab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expand the section about namespaces in the documentation of
`transfer.hideRefs` to point out the subtle differences between
`upload-pack` and `receive-pack`.
ffcfb68176 (upload-pack.c: treat want-ref relative to namespace,
2021-07-30) taught `upload-pack` to reject `want-ref`s for hidden refs,
which is now mentioned. It is clarified that at no point the name of a
hidden ref is revealed, but the object id it points to may.
Signed-off-by: Kim Altintop <kim@eagain.st>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'upload-pack' runs within the context of a git namespace, treat any
'want-ref' lines the client sends as relative to that namespace.
Also check if the wanted ref is hidden via 'hideRefs'. If it is hidden,
respond with an error as if the ref didn't exist.
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Kim Altintop <kim@eagain.st>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Assembling a "raw" fetch command to be fed directly to "test-tool serve-v2"
is extracted into a test helper.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Kim Altintop <kim@eagain.st>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the free_mailmap_entry() code added in 0925ce4d49 (Add map_user()
and clear_mailmap() to mailmap, 2009-02-08) the intent was clearly to
clear the "me" structure, but while we freed parts of the
mailmap_entry structure, we didn't free the structure itself. The same
goes for the "mailmap_info" structure.
This brings the number of SANITIZE=leak failures in t4203-mailmap.sh
down from 50 to 49. Not really progress as far as the number of
failures is concerned, but as far as I can tell this fixes all leaks
in mailmap.c itself. There's still users of it such as builtin/log.c
that call read_mailmap() without a clear_mailmap(), but that's on
them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7f40759496 (fast-export: tighten anonymize_mem() interface to
handle only strings, 2020-06-23) changed the interface used in anonymizing
strings, but failed to update the size of annotated tag messages to match
the new anonymized string.
As a result, exporting tags having messages longer than 13 characters
would create output that couldn't be parsed by fast-import,
as the data length indicated was larger than the data output.
Reset the message size when anonymizing, and add a tag with a "long"
message to the test.
Signed-off-by: Tal Kelrich <hasturkun@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in a2ba162cda (object-info: support for retrieving
object info, 2021-04-20) which appears to have been based on a
misunderstanding of how the pkt-line.c API works. There is no need to
strdup() input to packet_writer_write(), it's just a printf()-like
format function.
This fixes a potentially large memory leak, since the number of OID
lines the "object-info" call can be arbitrarily large (or a small one
if the request is small).
This makes t5701-git-serve.sh pass again under SANITIZE=leak, as it
did before a2ba162cda.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Bruno Albuquerque <bga@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fail to start a diff command inside a submodule, immediately
exit the routine rather than trying to finish the command and printing
a second message.
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have ever initialized a submodule, open_submodule will open it.
If you then delete the submodule's worktree directory (but don't
remove it from .gitmodules), git diff --submodule=diff would error out
as it attempted to chdir into the now-deleted working tree directory.
This only matters if the submodules git dir is absorbed. If not, then
we no longer have anywhere to run the diff. But that case does not
trigger this error, because in that case, open_submodule fails, so we
don't resolve a left commit, so we exit early, which is the only thing
we could do.
If absorbed, then we can run the diff from the submodule's absorbed
git dir (.git/modules/sm2). In practice, that's a bit more
complicated, because `git diff` expects to be run from inside a
working directory, not a git dir. So it looks in the config for
core.worktree, and does chdir("../../../sm2"), which is the very dir
that we're trying to avoid visiting because it's been deleted. We
work around this by setting GIT_WORK_TREE (and GIT_DIR) to ".". It is
little weird to set GIT_WORK_TREE to something that is not a working
tree just to avoid an unnecessary chdir, but it works.
Signed-off-by: David Turner <dturner@twosigma.com
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bring the "commit-graph" command in line with the error output and
general pattern in cmd_multi_pack_index().
Let's test for that output, and also cover the same potential bug as
was fixed in the multi-pack-index command in
88617d11f9 (multi-pack-index: fix potential segfault without
sub-command, 2021-07-19).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the parse_options() invocation in the commit-graph code to
error on unknown leftover argv elements, in addition to the existing
and implicit erroring via parse_options() on unknown options.
We'd already error in cmd_commit_graph() on e.g.:
git commit-graph unknown verify
git commit-graph --unknown verify
But here we're calling parse_options() twice more for the "write" and
"verify" subcommands. We did not do the same checking for leftover
argv elements there. As a result we'd silently accept garbage in these
subcommands, let's not do that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rather than guarding all of the !argc with an additional "if" arm
let's do an early goto to "usage". This also makes it clear that
"save_commit_buffer" is not needed in this case.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the "goto usage" pattern added in
cd57bc41bb (builtin/multi-pack-index.c: display usage on unrecognized
command, 2021-03-30) and 88617d11f9 (multi-pack-index: fix potential
segfault without sub-command, 2021-07-19) to maintain the same
brevity, but in a form that doesn't run afoul of the recommendation in
CodingGuidelines about braces:
When there are multiple arms to a conditional and some of them
require braces, enclose even a single line block in braces for
consistency[...]
Let's also change "argv == 0" to juts "!argv", per:
Do not explicitly compare an integral value with constant 0 or
'\0', or a pointer value with constant NULL[...]
I'm changing this because in a subsequent commit I'll make
builtin/commit-graph.c use the same pattern, having the two similarly
structured commands match aids readability.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make use of the parse_options_concat() so we don't need to copy/paste
common options like --object-dir.
This is inspired by a similar change to "checkout" in 2087182272
(checkout: split options[] array in three pieces, 2019-03-29), and the
same pattern in the multi-pack-index command, see
60ca94769c (builtin/multi-pack-index.c: split sub-commands,
2021-03-30).
A minor behavior change here is that now we're going to list both
--object-dir and --progress first, before we'd list --progress along
with other options.
Co-authored-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we don't handle the -h option here like most parse_options() users
we'll fall through and it'll do the right thing for us.
I think this code added in 4ce58ee38d (commit-graph: create
git-commit-graph builtin, 2018-04-02) was always redundant,
parse_options() did this at the time, and the commit-graph code never
used PARSE_OPT_NO_INTERNAL_HELP.
We don't need a test for this, it's tested by the t0012-help.sh test
added in d691551192 (t0012: test "-h" with builtins, 2017-05-30).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Share the usage message between these three variables by using a
macro. Before this new options needed to copy/paste the usage
information, see e.g. 809e0327f5 (builtin/commit-graph.c: introduce
'--max-new-filters=<n>', 2020-09-18).
See b25b727494 (builtin/multi-pack-index.c: define common usage with
a macro, 2021-03-30) for another use of this pattern (but on-list this
one came first).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Silently skipping commits when rebasing with --no-reapply-cherry-picks
(currently the default behavior) can cause user confusion. Issue
warnings when this happens, as well as advice on how to preserve the
skipped commits.
These warnings and advice are displayed only when using the (default)
"merge" rebase backend.
Update the git-rebase docs to mention the warnings and advice.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The most significant of this batch is of course "merge -sort".
Thanks, Elijah and everybody who helped the topic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current implementation of GIT_TEST_FAIL_PREREQS is broken in
that checking for the lack of a prerequisite would not work. Avoid
the use of "if ! test_have_prereq X" in a test script.
* bc/t5607-avoid-broken-test-fail-prereqs:
t5607: avoid using prerequisites to select algorithm
"git range-diff" code clean-up.
* jk/range-diff-fixes:
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
"git apply" miscounted the bytes and failed to read to the end of
binary hunks.
* jk/apply-binary-hunk-parsing-fix:
apply: keep buffer/size pair in sync when parsing binary hunks
Remind developers that the userdiff patterns should be kept simple
and permissive, assuming that the contents they apply are always
syntactically correct.
* jc/userdiff-pattern-hint:
userdiff: comment on the builtin patterns
Use `ort` instead of `recursive` as the default merge strategy.
* en/ort-becomes-the-default:
Update docs for change of default merge backend
Change default merge backend from recursive to ort
Documentation updates.
* en/merge-strategy-docs:
Update error message and code comment
merge-strategies.txt: add coverage of the `ort` merge strategy
git-rebase.txt: correct out-of-date and misleading text about renames
merge-strategies.txt: fix simple capitalization error
merge-strategies.txt: avoid giving special preference to patience algorithm
merge-strategies.txt: do not imply using copy detection is desired
merge-strategies.txt: update wording for the resolve strategy
Documentation: edit awkward references to `git merge-recursive`
directory-rename-detection.txt: small updates due to merge-ort optimizations
git-rebase.txt: correct antiquated claims about --rebase-merges
"git pull" had various corner cases that were not well thought out
around its --rebase backend, e.g. "git pull --ff-only" did not stop
but went ahead and rebased when the history on other side is not a
descendant of our history. The series tries to fix them up.
* en/pull-conflicting-options:
pull: fix handling of multiple heads
pull: update docs & code for option compatibility with rebasing
pull: abort by default when fast-forwarding is not possible
pull: make --rebase and --no-rebase override pull.ff=only
pull: since --ff-only overrides, handle it first
pull: abort if --ff-only is given and fast-forwarding is impossible
t7601: add tests of interactions with multiple merge heads and config
t7601: test interaction of merge/rebase/fast-forward flags and options
Based on current experience, when running git clone --recurse-submodules,
developers do not expect other commands such as pull or checkout to run
recursively into active submodules. However, setting submodule.recurse=true
at this step could make for a simpler workflow by eliminating the need for
the --recurse-submodules option in subsequent commands. To collect more
data on developers' preference in regards to making submodule.recurse=true
a default config value in the future, deploy this feature under the opt in
submodule.stickyRecursiveClone flag.
Signed-off-by: Mahi Kolla <mkolla2@illinois.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If multiple independent patches are sent with send-email, even if the
"In-Reply-To" and "References" headers are not managed by --thread or
--in-reply-to, their values may be propagated from prior patches to
subsequent patches with no such headers defined.
To mitigate this and potential future issues, make sure all global
patch-specific variables are always either handled by
command-specific code (e.g. threading), or are reset to their default
values for every iteration.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Marvin Häuser <mhaeuser@posteo.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching, Git will by default print a list of all updated refs in a
nicely formatted table. In order to come up with this table, Git needs
to iterate refs twice: first to determine the maximum column width, and
a second time to actually format these changed refs.
While this table will not be printed in case the user passes `--quiet`,
we still go out of our way and do all these steps. In fact, we even do
more work compared to not passing `--quiet`: without the flag, we will
skip all references in the column width computation which have not been
updated, but if it is set we will now compute widths for all refs.
Fix this issue by completely skipping both preparation of the format and
formatting data for display in case the user passes `--quiet`, improving
performance especially with many refs. The following benchmark shows a
nice speedup for a quiet mirror-fetch in a repository with 2.3M refs:
Benchmark #1: HEAD~: git-fetch
Time (mean ± σ): 26.929 s ± 0.145 s [User: 24.194 s, System: 4.656 s]
Range (min … max): 26.692 s … 27.068 s 5 runs
Benchmark #2: HEAD: git-fetch
Time (mean ± σ): 25.189 s ± 0.094 s [User: 22.556 s, System: 4.606 s]
Range (min … max): 25.070 s … 25.314 s 5 runs
Summary
'HEAD: git-fetch' ran
1.07 ± 0.01 times faster than 'HEAD~: git-fetch'
While at it, this patch also fixes `adjust_refcol_width()` such that it
skips unchanged refs in case the user passed `--quiet`, where verbosity
will be negative. While this function won't be called anymore if so,
this brings the comment in line with actual code. Furthermore, needless
`verbosity >= 0` checks are now removed in `store_updated_refs()`: we
never print to the `note` buffer anymore in case `verbosity < 0`, so we
won't end up in that code block anyway.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call fspathcmp() instead of open-coding it. This shortens the code and
makes it less repetitive.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Every once in a while a test somehow manages to escape from its trash
directory and modifies the surrounding repository, whether because of
a bug in git itself, a bug in a test [1], or e.g. when trying to run
tests with a shell that is, in general, unable to run our tests [2].
Set GIT_CEILING_DIRECTORIES="$TRASH_DIRECTORY/.." as an additional
safety measure to protect the surrounding repository at least from
modifications by git commands executed in the tests (assuming that
handling of ceiling directories during repository discovery is not
broken, and, of course, it won't save us from regular shell commands,
e.g. 'cd .. && rm -f ...').
[1] e.g. https://public-inbox.org/git/20210423051255.GD2947267@szeder.dev
[2] $ git symbolic-ref HEAD
refs/heads/master
$ ksh ./t2011-checkout-invalid-head.sh
[... a lot of "not ok" ...]
$ git symbolic-ref HEAD
refs/heads/other
(In short: 'ksh' doesn't support the 'local' builtin command,
which is used by 'test_oid', causing it to return with error
whenever it's called, leaving ZERO_OID set to empty, so when the
test 'checkout main from invalid HEAD' runs 'echo $ZERO_OID
>.git/HEAD' it writes a corrupt (not invalid) HEAD, and subsequent
git commands don't recognize the repository in the trash directory
anymore, but operate on the surrounding repo.)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix syntax and correct the format of printf in MyFirstObjectWalk.txt
Signed-off-by: Zoker <kaixuanguiqu@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Copy the 'index_state->dir_hash' back to the real istate after expanding
a sparse index.
A crash was observed in 'git status' during some hashmap lookups with
corrupted hashmap entries. During an index expansion, new cache-entries
are added to the 'index_state->name_hash' and the 'dir_hash' in a
temporary 'index_state' variable 'full'. However, only the 'name_hash'
hashmap from this temp variable was copied back into the real 'istate'
variable. The original copy of the 'dir_hash' was incorrectly
preserved. If the table in the 'full->dir_hash' hashmap were realloced,
the stale version (in 'istate') would be corrupted.
The test suite does not operate on index sizes sufficiently large to
trigger this reallocation, so they do not cover this behavior.
Increasing the test suite to cover such scale is fragile and likely
wasteful.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the original code from 08cdfb1337 (pack-objects --keep-unreachable,
2007-09-16), we add each object to the packing list with type
`obj->type`, where `obj` comes from `lookup_unknown_object()`. Unless we
had already looked up and parsed the object, this will be `OBJ_NONE`.
That's fine, since oe_set_type() sets the type_valid bit to '0', and we
determine the real type later on.
So the only thing we need from the object lookup is access to the
`flags` field so that we can mark that we've added the object with
`OBJECT_ADDED` to avoid adding it again (we can just pass `OBJ_NONE`
directly instead of grabbing it from the object).
But add_object_entry() already rejects duplicates! This has been the
behavior since 7a979d99ba (Thin pack - create packfile with missing
delta base., 2006-02-19), but 08cdfb1337 didn't take advantage of it.
Moreover, to do the OBJECT_ADDED check, we have to do a hash lookup in
`obj_hash`.
So we can drop the lookup_unknown_object() call completely, *and* the
OBJECT_ADDED flag, too, since the spot we're touching here is the only
location that checks it.
In the end, we perform the same number of hash lookups, but with the
added bonus that we don't waste memory allocating an OBJ_NONE object (if
we were traversing, we'd need it eventually, but the whole point of this
code path is not to traverse).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is used to implement `pack-objects`'s `--keep-unreachable`
option, but can be simplified in a couple of ways:
- add_objects_in_unpacked_packs() iterates over all packs (and then
all packed objects) itself, but could use for_each_packed_object()
instead since the missing flags necessary were added in the previous
commit
- objects are added to an in_pack array which store (off_t, object)
tuples, and then sorted in offset order when we could iterate
objects in offset order.
There is a slight behavior change here: before we would have added
objects in sorted offset order among _all_ packs. Handing objects to
create_object_entry() in pack order for each pack (instead of
feeding objects from all packs simultaneously their offset relative
to different packs) is much more reasonable, if different than how
the code currently works.
- objects in a single pack are iterated in index order and searched
for in order to discover their offsets, which is much less efficient
than using the on-disk reverse index
Simplify the function by addressing each of the above and moving the
core of the loop into a callback function that we then pass to
for_each_packed_object() instead of open-coding the latter function
ourselves.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next patch will reimplement a function that wants to iterate over
packed objects while ignoring packs which are marked as kept (either
in-core or on-disk).
Teach for_each_packed_object() to ignore all objects from those packs by
adding a new flag for each of the "kept" states that a pack can be in.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no other API docs in bundle.h, but this is at least a
start. We'll add a parameter to this function in a subsequent commit,
but let's start by documenting it.
The "/**" comment (as opposed to "/*") signifies the start of API
documentation. See [1] and bdfdaa4978 (strbuf.h: integrate
api-strbuf.txt documentation, 2015-01-16) and 6afbbdda33 (strbuf.h:
unify documentation comments beginnings, 2015-01-16) for a discussion
of that convention.
1. https://lore.kernel.org/git/874kbeecfu.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git branch only allows deleting branches that point to valid commits.
Skip that check if --force is given, as the caller is indicating with
it that they know what they are doing and accept the consequences.
This allows deleting dangling branches, which previously had to be
reset to a valid start-point using --force first.
Reported-by: Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass the struct object_id on instead of just its hash member.
This is simpler and avoids the need to guess the algorithm.
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only one of the callers of rev_is_head() provides two hashes to compare.
Move that check there and convert it to struct object_id.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The word "encoding" can mean a lot of things (e.g., base64 or
quoted-printable encoding in emails, HTML entities, URL encoding, and so
on). The documentation for i18n.commitEncoding and i18n.logOutputEncoding
uses the phrase "character encoding" to make this more clear.
Let's use that phrase in other places to make it clear what kind of
encoding we are talking about. This patch covers the gui.encoding
option, as well as the --encoding option for git-log, etc (in this
latter case, I word-smithed the sentence a little at the same time).
That, coupled with the mention of iconv in the --encoding description,
should make this more clear.
The other spot I looked at is the working-tree-encoding section of
gitattributes(5). But it gives specific examples of encodings that I
think make the meaning pretty clear already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user asks for a pretty-printed commit to be converted (either
explicitly with --encoding=foo, or implicitly because the commit is
non-utf8 and we want to convert it), we pass it through iconv(). If that
fails, we fall back to showing the input verbatim, but don't tell the
user that the output may be bogus.
Let's add a warning to do so, along with a mention in the documentation
for --encoding. Two things to note about the implementation:
- we could produce the warning closer to the call to iconv() in
reencode_string_len(), which would let us relay the value of errno.
But this is not actually very helpful. reencode_string_len() does
not know we are operating on a commit, and indeed does not know that
the caller won't produce an error of its own. And the errno values
from iconv() are seldom helpful (iconv_open() only ever produces
EINVAL; perhaps EILSEQ from iconv() might be illuminating, but it
can also return EINVAL for incomplete sequences).
- if the reason for the failure is that the output charset is not
supported, then the user will see this warning for every commit we
try to display. That might be ugly and overwhelming, but on the
other hand it is making it clear that every one of them has not been
converted (and the likely outcome anyway is to re-try the command
with a supported output encoding).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'Filtering contents...' progress report from delayed checkout is
displayed even when checkout and clone are invoked with --quiet or
--no-progress. Furthermore, it is displayed unconditionally, without
first checking whether stdout is a tty. Let's fix these issues and also
add some regression tests for the two code paths that currently use
delayed checkout: unpack_trees.c:check_updates() and
builtin/checkout.c:checkout_worktree().
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git column's '--nl' option can be used to specify a "string to be
printed at the end of each line" (quoting the man page), but this
option and its mandatory argument has been parsed as OPT_INTEGER since
the introduction of the command in 7e29b8254f (Add column layout
skeleton and git-column, 2012-04-21). Consequently, any non-number
argument is rejected by parse-options, and any number other than 0
leads to segfault:
$ printf "%s\n" one two |git column --mode=plain --nl=foo
error: option `nl' expects a numerical value
$ printf "%s\n" one two |git column --mode=plain --nl=42
Segmentation fault (core dumped)
$ printf "%s\n" one two |git column --mode=plain --nl=0
one
two
Parse this option as OPT_STRING.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the initial reference advertisement, the Git server will first
announce all of its references to the client. The logic is handled in
`send_ref()`, which will allocate a new buffer for each refline it is
about to send. This is quite wasteful: instead of allocating a new
buffer each time, we can just reuse a buffer.
Improve this by passing in a buffer via the `ls_refs_data` struct which
is then reused on each reference.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and apply a semantic patch for using xopen() instead of calling
open(2) and die() or die_errno() explicitly. This makes the error
messages more consistent and shortens the code.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the flags O_CREAT and O_EXCL are both given then open(2) is supposed
to create the file and error out if it already exists. The error
message in that case looks like this:
fatal: could not open 'foo' for writing: File exists
Without further context this is confusing: Why should the existence of
the file pose a problem? Isn't that a requirement for writing to it?
Add a more specific error message for that case to tell the user that we
actually don't expect the file to preexist, so the example becomes:
fatal: unable to create 'foo': File exists
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it explicit how alternative ref backends should report errors in
read_raw_ref_fn.
read_raw_ref_fn needs to supply a credible errno for a number of cases. These
are primarily:
1) The files backend calls read_raw_ref from lock_raw_ref, and uses the
resulting error codes to create/remove directories as needed.
2) ENOENT should be translated in a zero OID, optionally with REF_ISBROKEN set,
returning the last successfully resolved symref. This is necessary so
read_raw_ref("HEAD") on an empty repo returns refs/heads/main (or the default branch
du-jour), and we know on which branch to create the first commit.
Make this information flow explicit by adding a failure_errno to the signature
of read_raw_ref. All errnos from the files backend are still propagated
unchanged, even though inspection suggests only ENOTDIR, EISDIR and ENOENT are
relevant.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
refs/files-backend.c::lock_ref_oid_basic() tries to signal how it failed
to its callers using errno.
It is safe to stop setting errno here, because the callers of this
file-scope static function are
* files_copy_or_rename_ref()
* files_create_symref()
* files_reflog_expire()
None of them looks at errno after seeing a negative return from
lock_ref_oid_basic() to make any decision, and no caller of these three
functions looks at errno after they signal a failure by returning a
negative value. In particular,
* files_copy_or_rename_ref() - here, calls are followed by error()
(which performs I/O) or write_ref_to_lockfile() (which calls
parse_object() which may perform I/O)
* files_create_symref() - here, calls are followed by error() or
create_symref_locked() (which performs I/O and does not inspect
errno)
* files_reflog_expire() - here, calls are followed by error() or
refs_reflog_exists() (which calls a function in a vtable that is not
documented to use and/or preserve errno)
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit does not change code; it documents the fact that an alternate ref
backend does not need to return EINVAL from read_raw_ref_fn to function
properly.
This is correct, because refs_read_raw_ref is only called from;
* resolve_ref_unsafe(), which does not care for the EINVAL errno result.
* refs_verify_refname_available(), which does not inspect errno.
* files-backend.c, where errno is overwritten on failure.
* packed-backend.c (is_packed_transaction_needed), which calls it for the
packed ref backend, which never emits EINVAL.
A grep for EINVAL */*c reveals that no code checks errno against EINVAL after
reading references. In addition, the refs.h file does not mention errno at all.
A grep over resolve_ref_unsafe() turned up the following callers that inspect
errno:
* sequencer.c::print_commit_summary, which uses it for die_errno
* lock_ref_oid_basic(), which only treats EISDIR and ENOTDIR specially.
The files ref backend does use EINVAL. The files backend does not call into
the generic API (refs_read_raw), but into the files-specific function
(files_read_raw_ref), which we are not changing in this commit.
As the errno sideband is unintuitive and error-prone, remove EINVAL
value, as a step towards getting rid of the errno sideband altogether.
Spotted by Ævar Arnfjörð Bjarmason <avarab@gmail.com>.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the raceproof_create_file() API added to cache.h and
object-file.c in 177978f56a (raceproof_create_file(): new function,
2017-01-06) to its only user, refs/files-backend.c.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a follow-up to the preceding commit where we removed the adjacent
"errno == EISDIR" condition in the same function, remove the
"last_errno != ENOTDIR" condition here.
It's not possible for us to hit this condition added in
5b2d8d6f21 (lock_ref_sha1_basic(): improve diagnostics for ref D/F
conflicts, 2015-05-11). Since a1c1d8170d (refs_resolve_ref_unsafe:
handle d/f conflicts for writes, 2017-10-06) we've explicitly caught
these in refs_resolve_ref_unsafe() before returning NULL:
if (errno != ENOENT &&
errno != EISDIR &&
errno != ENOTDIR)
return NULL;
We'd then always return the refname from refs_resolve_ref_unsafe()
even if we were in a broken state as explained in the preceding
commit. The elided context here is a call to refs_resolve_ref_unsafe().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we lock a reference like "foo" we need to handle the case where
"foo" exists, but is an empty directory. That's what this code added
in bc7127ef0f (ref locking: allow 'foo' when 'foo/bar' used to exist
but not anymore., 2006-09-30) seems like it should be dealing with.
Except it doesn't, and we never take this branch. The reason is that
when bc7127ef0f was written this looked like:
ref = resolve_ref([...]);
if (!ref && errno == EISDIR) {
[...]
And in resolve_ref() we had this code:
fd = open(path, O_RDONLY);
if (fd < 0)
return NULL;
I.e. we would attempt to read "foo" with open(), which would fail with
EISDIR and we'd return NULL. We'd then take this branch, call
remove_empty_directories() and continue.
Since a1c1d8170d (refs_resolve_ref_unsafe: handle d/f conflicts for
writes, 2017-10-06) we don't. E.g. in the case of
files_copy_or_rename_ref() our callstack will look something like:
[...] ->
files_copy_or_rename_ref() ->
lock_ref_oid_basic() ->
refs_resolve_ref_unsafe()
At that point the first (now only) refs_resolve_ref_unsafe() call in
lock_ref_oid_basic() would do the equivalent of this in the resulting
call to refs_read_raw_ref() in refs_resolve_ref_unsafe():
/* Via refs_read_raw_ref() */
fd = open(path, O_RDONLY);
if (fd < 0)
/* get errno == EISDIR */
/* later, in refs_resolve_ref_unsafe() */
if ([...] && errno != EISDIR)
return NULL;
[...]
/* returns the refs/heads/foo to the caller, even though it's a directory */
return refname;
I.e. even though we got an "errno == EISDIR" we won't take this
branch, since in cases of EISDIR "resolved" is always
non-NULL. I.e. we pretend at this point as though everything's OK and
there is no "foo" directory.
We then proceed with the entire ref update and don't call
remove_empty_directories() until we call commit_ref_update(). See
5387c0d883 (commit_ref(): if there is an empty dir in the way, delete
it, 2016-05-05) for the addition of that code, and
a1c1d8170d (refs_resolve_ref_unsafe: handle d/f conflicts for writes,
2017-10-06) for the commit that changed the original codepath added in
bc7127ef0f to use this "EISDIR" handling.
Further historical commentary:
Before the two preceding commits the caller in files_reflog_expire()
was the only one out of our 4 callers that would pass non-NULL as an
oid. We would then set a (now gone) "resolve_flags" to
"RESOLVE_REF_READING" and just before that "errno != EISDIR" check do:
if (resolve_flags & RESOLVE_REF_READING)
return NULL;
There may have been some case where this ended up mattering and we
couldn't safely make this change before we removed the "oid"
parameter, but I don't think there was, see [1] for some discussion on
that.
In any case, now that we've removed the "oid" parameter in a preceding
commit we can be sure that this code is redundant, so let's remove it.
1. http://lore.kernel.org/git/871r801yp6.fsf@evledraar.gmail.com
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commit the last caller that passed a non-NULL OID was
changed to pass NULL to lock_ref_oid_basic(). As noted in preceding
commits use of this API has been going away (we should use ref
transactions, or lock_raw_ref()), so we're unlikely to gain new
callers that want to pass the "oid".
So let's remove it, doing so means we can remove the "mustexist"
condition, and therefore anything except the "flags =
RESOLVE_REF_NO_RECURSE" case.
Furthermore, since the verify_lock() function we called did most of
its work when the "oid" was passed (as "old_oid") we can inline the
trivial part of it that remains in its only remaining caller. Without
a NULL "oid" passed it was equivalent to calling refs_read_ref_full()
followed by oidclr().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the the preceding commit the "oid" parameter to reflog_expire()
is always NULL, but it was not cleaned up to reduce the size of the
diff. Let's do that subsequent API and documentation cleanup now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During reflog expiry, the cmd_reflog_expire() function first iterates
over all reflogs in logs/*, and then one-by-one acquires the lock for
each one and expires it. This behavior has been with us since this
command was implemented in 4264dc15e1 ("git reflog expire",
2006-12-19).
Change this to stop calling lock_ref_oid_basic() with the OID we saw
when we looped over the logs, instead have it pass the OID it managed
to lock.
This mostly mitigates a race condition where e.g. "git gc" will fail
in a concurrently updated repository because the branch moved since
"git reflog expire --all" was started. I.e. with:
error: cannot lock ref '<refname>': ref '<refname>' is at <OID-A> but expected <OID-B>
This behavior of passing in an "oid" was needed for an edge-case that
I've untangled in this and preceding commits though, namely that we
needed this OID because we'd:
1. Lookup the reflog name/OID via dwim_log()
2. With that OID, lock the reflog
3. Later in builtin/reflog.c we use the OID we looked as input to
lookup_commit_reference_gently(), assured that it's equal to the
OID we got from dwim_log().
We can be sure that this change is safe to make because between
dwim_log (step #1) and lock_ref_oid_basic (step #2) there was no other
logic relevant to the OID or expiry run in the cmd_reflog_expire()
caller.
We can thus treat that code as a black box, before and after this
change it would get an OID that's been locked, the only difference is
that now we mostly won't be failing to get the lock due to the TOCTOU
race[0]. That failure was purely an implementation detail in how the
"current OID" was looked up, it was divorced from the locking
mechanism.
What do we mean with "mostly"? It mostly mitigates it because we'll
still run into cases where the ref is locked and being updated as we
want to expire it, and other git processes wanting to update the refs
will in turn race with us as we expire the reflog.
That remaining race can in turn be mitigated with the
core.filesRefLockTimeout setting, see 4ff0f01cb7 ("refs: retry
acquiring reference locks for 100ms", 2017-08-21). In practice if that
value is high enough we'll probably never have ref updates or reflog
expiry failing, since the clients involved will retry for far longer
than the time any of those operations could take.
See [1] for an initial report of how this impacted "git gc" and a
large discussion about this change in early 2019. In particular patch
looked good to Michael Haggerty, see his[2]. That message seems to not
have made it to the ML archive, its content is quoted in full in my
[3].
I'm leaving behind now-unused code the refs API etc. that takes the
now-NULL "unused_oid" argument, and other code that can be simplified now
that we never have on OID in that context, that'll be cleaned up in
subsequent commits, but for now let's narrowly focus on fixing the
"git gc" issue. As the modified assert() shows we always pass a NULL
oid to reflog_expire() now.
Unfortunately this sort of probabilistic contention is hard to turn
into a test. I've tested this by running the following three subshells
in concurrent terminals:
(
rm -rf /tmp/git &&
git init /tmp/git &&
while true
do
head -c 10 /dev/urandom | hexdump >/tmp/git/out &&
git -C /tmp/git add out &&
git -C /tmp/git commit -m"out"
done
)
(
rm -rf /tmp/git-clone &&
git clone file:///tmp/git /tmp/git-clone &&
while git -C /tmp/git-clone pull
do
date
done
)
(
while git -C /tmp/git-clone reflog expire --all
do
date
done
)
Before this change the "reflog expire" would fail really quickly with
the "but expected" error noted above.
After this change both the "pull" and "reflog expire" will run for a
while, but eventually fail because I get unlucky with
core.filesRefLockTimeout (the "reflog expire" is in a really tight
loop). As noted above that can in turn be mitigated with higher values
of core.filesRefLockTimeout than the 100ms default.
As noted in the commentary added in the preceding commit there's also
the case of branches being racily deleted, that can be tested by
adding this to the above:
(
while git -C /tmp/git-clone branch topic master &&
git -C /tmp/git-clone branch -D topic
do
date
done
)
With core.filesRefLockTimeout set to 10 seconds (it can probably be a
lot lower) I managed to run all four of these concurrently for about
an hour, and accumulated ~125k commits, auto-gc's and all, and didn't
have a single failure. The loops visibly stall while waiting for the
lock, but that's expected and desired behavior.
0. https://en.wikipedia.org/wiki/Time-of-check_to_time-of-use
1. https://lore.kernel.org/git/87tvg7brlm.fsf@evledraar.gmail.com/
2. http://lore.kernel.org/git/b870a17d-2103-41b8-3cbc-7389d5fff33a@alum.mit.edu
3. https://lore.kernel.org/git/87pnqkco8v.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a comment about why it is that we need to check for the the
existence of a reflog we're deleting after we've successfully acquired
the lock in files_reflog_expire(). As noted in [1] the lock protocol
for reflogs is somewhat intuitive.
This early exit code the comment applies to dates all the way back to
4264dc15e1 (git reflog expire, 2006-12-19).
1. https://lore.kernel.org/git/54DCDA42.2060800@alum.mit.edu/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the repo_dwim_log() function initially added as dwim_log() in
eb3a48221f (log --reflog: use dwim_log, 2007-02-09) to accept a NULL
oid parameter. The refs_resolve_ref_unsafe() function it invokes
already deals with it, but it didn't.
This allows for a bit more clarity in a reflog-walk.c codepath added
in f2eba66d4d (Enable HEAD@{...} and make it independent from the
current branch, 2007-02-03). We'll shortly use this in
builtin/reflog.c as well.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Re-indent this argument list that's been mis-indented since it was
added in 34c319970d (refs/debug: trace into reflog expiry too,
2021-04-23). This makes a subsequent change smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the unused "skip" parameter to lock_raw_ref(), it was never
used. We do use it when passing "skip" to the
refs_rename_ref_available() function in files_copy_or_rename_ref(),
but not here.
This is part of a larger series that modifies lock_ref_oid_basic()
extensively, there will be no more modifications of this function in
this series, but since the preceding commit removed this unused
parameter from lock_ref_oid_basic(), let's do it here too for
consistency.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The lock_ref_oid_basic() function has gradually been replaced by use
of the file transaction API, there are only 4 remaining callers of
it.
None of those callers pass non-NULL "extras" and "skip" parameters,
the last such caller went away in 92b1551b1d (refs: resolve symbolic
refs first, 2016-04-25), so let's remove the parameters.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the last commit we removed the REF_DELETING flag from
lock_ref_oid_basic(). Since then all of the remaining callers do pass
REF_NO_DEREF, but that has been ignored completely since
7a418f3a17 (lock_ref_sha1_basic(): only handle REF_NODEREF mode,
2016-04-22).
So we can simply get rid of the parameter entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the squashing of the advice.graftFileDeprecated advice over to an
external variable in commit.[ch], allowing advice() to purely use the
new-style API of invoking advice() with an enum.
See 8821e90a09 (advice: don't pointlessly suggest
--convert-graft-file, 2018-11-27) for why quieting this advice was
needed. It's more straightforward to move this code to commit.[ch] and
use it builtin/replace.c, than to go through the indirection of
advice.[ch].
Because this was the last advice_config variable we can remove that
old facility from advice.c.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The external use of this variable was added in 532139940c (add: warn
when adding an embedded repository, 2017-06-14). For the use-case it's
more straightforward to track whether we've shown advice in
check_embedded_repo() than setting the global variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In c4a09cc9cc (Merge branch 'hw/advise-ng', 2020-03-25), a new API for
accessing advice variables was introduced and deprecated `advice_config`
in favor of a new array, `advice_setting`.
This patch ports all but two uses which read the status of the global
`advice_` variables over to the new `advice_enabled` API. We'll deal
with advice_add_embedded_repo and advice_graft_file_deprecated
separately.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In daef1b300b (Merge branch 'hw/advice-add-nothing', 2020-02-14), two
advice settings were introduced into the `advice_config` array.
Subsequently, c4a09cc9cc (Merge branch 'hw/advise-ng', 2020-03-25)
started to deprecate `advice_config` in favor of a new array,
`advice_setting`.
However, the latter branch did not include the former branch, and
therefore `advice_setting` is missing the two entries added by the
`hw/advice-add-nothing` branch.
These are currently the only entries in `advice_config` missing from
`advice_setting`.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For diff family commands, we can tell them to exclude changes outside
of some directories if --relative is requested.
In diff_unmerge(), NULL will be returned if the requested path is
outside of the interesting directories, thus we'll run into NULL
pointer dereference in run_diff_files when trying to dereference
its return value.
Checking for return value of diff_unmerge before dereferencing
is not sufficient, though. Since, diff engine will try to work on such
pathspec later.
Let's not run diff on those unintesting entries, instead.
As a side effect, by skipping like that, we can save some CPU cycles.
Reported-by: Thomas De Zeeuw <thomas@slight.dev>
Tested-by: Carlo Arenas <carenas@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In test_atom(), we're piping the output of cat-file to tail(1),
thus, losing its exit status.
Let's use a temporary file to preserve git exit status code.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t6300, some tests are guarded behind some prerequisites.
Thus, objects created by those tests ain't available if those
prerequisites are unsatistified. Attempting to run "cat-file"
on those objects will run into failure.
In fact, running t6300 in an environment without gpg(1),
we'll see those warnings:
fatal: Not a valid object name refs/tags/signed-empty
fatal: Not a valid object name refs/tags/signed-short
fatal: Not a valid object name refs/tags/signed-long
Let's put those commands into the real tests, in order to:
* skip their execution if prerequisites aren't satistified.
* check their exit status code
The expected value for objects with type: commit needs to be
computed outside the test because we can't rely on "$3" there.
Furthermore, to prevent the accidental usage of that computed
expected value, BUG out on unknown object's type.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0696232390 (pack-redundant: fix crash when one packfile in repo,
2020-12-16) added one some new tests to t5323. At the time, the sub-repo
we used was called "master". But in a parallel branch, this was switched
to "main".
When the latter branch was merged in 27d7c8599b (Merge branch
'js/default-branch-name-tests-final-stretch', 2021-01-25), some of those
spots caused textual conflicts, but some (for tests that were far enough
away from other changed code) were just semantic. The merge resolution
fixed up most spots, but missed this one.
Even though this did impact actual code, it turned out not to fail the
tests. Running 'cd "$master_repo"' ended up staying in the same
directory, running the test in the main trash repo instead of the
sub-repo. But because the point of the test is checking behavior when
there are no packfiles, it worked in either repo (since both are empty
at this point in the script).
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Loading of ref tips to prepare for common ancestry negotiation in
"git fetch-pack" has been optimized by taking advantage of the
commit graph when available.
* ps/fetch-pack-load-refs-optim:
fetch-pack: speed up loading of refs via commit graph
Bugfix for common ancestor negotiation recently introduced in "git
push" code path.
* jt/push-negotiation-fixes:
fetch: die on invalid --negotiation-tip hash
send-pack: fix push nego. when remote has refs
send-pack: fix push.negotiate with remote helper
trace2 logs learned to show parent process name to see in what
context Git was invoked.
* es/trace2-log-parent-process-name:
tr2: log parent process name
tr2: make process info collection platform-generic
A handful of tests that assumed implementation details of files
backend for refs have been cleaned up.
* hn/refs-test-cleanup:
t6001: avoid direct file system access
t6500: use "ls -1" to snapshot ref database state
t7064: use update-ref -d to remove upstream branch
t1410: mark test as REFFILES
t1405: mark test for 'git pack-refs' as REFFILES
t1405: use 'git reflog exists' to check reflog existence
t2402: use ref-store test helper to create broken symlink
t3320: use git-symbolic-ref rather than filesystem access
t6120: use git-update-ref rather than filesystem access
t1503: mark symlink test as REFFILES
t6050: use git-update-ref rather than filesystem access
Final batch for "merge -sort" optimization.
* en/ort-perf-batch-15:
merge-ort: remove compile-time ability to turn off usage of memory pools
merge-ort: reuse path strings in pool_alloc_filespec
merge-ort: store filepairs and filespecs in our mem_pool
diffcore-rename, merge-ort: add wrapper functions for filepair alloc/dealloc
merge-ort: switch our strmaps over to using memory pools
merge-ort: set up a memory pool
merge-ort: add pool_alloc, pool_calloc, and pool_strndup wrappers
diffcore-rename: use a mem_pool for exact rename detection's hashmap
merge-ort: rename str{map,intmap,set}_func()
Pathname expansion (like "~username/") learned a way to specify a
location relative to Git installation (e.g. its $sharedir which is
$(prefix)/share), with "%(prefix)".
* js/expand-runtime-prefix:
expand_user_path: allow in-flight topics to keep using the old name
interpolate_path(): allow specifying paths relative to the runtime prefix
Use a better name for the function interpolating paths
expand_user_path(): clarify the role of the `real_home` parameter
expand_user_path(): remove stale part of the comment
tests: exercise the RUNTIME_PREFIX feature
Prepare the "ref-filter" machinery that drives the "--format"
option of "git for-each-ref" and its friends to be used in "git
cat-file --batch".
* zh/ref-filter-raw-data:
ref-filter: add %(rest) atom
ref-filter: use non-const ref_format in *_atom_parser()
ref-filter: --format=%(raw) support --perl
ref-filter: add %(raw) atom
ref-filter: add obj-type check in grab contents
Input validation of "git pack-objects --stdin-packs" has been
corrected.
* ab/pack-stdin-packs-fix:
pack-objects: fix segfault in --stdin-packs option
pack-objects tests: cover blindspots in stdin handling
Support for ancient versions of cURL library (pre 7.19.4) has been
dropped.
* ab/http-drop-old-curl:
http: rename CURLOPT_FILE to CURLOPT_WRITEDATA
http: drop support for curl < 7.19.3 and < 7.17.0 (again)
http: drop support for curl < 7.19.4
http: drop support for curl < 7.16.0
http: drop support for curl < 7.11.1
"git add" can work better with the sparse index.
* ds/add-with-sparse-index:
add: remove ensure_full_index() with --renormalize
add: ignore outside the sparse-checkout in refresh()
pathspec: stop calling ensure_full_index
add: allow operating on a sparse-only index
t1092: test merge conflicts outside cone
"git bisect" spawned "git show-branch" only to pretty-print the
title of the commit after checking out the next version to be
tested; this has been rewritten in C.
* jc/bisect-sans-show-branch:
bisect: simplify return code from bisect_checkout()
bisect: do not run show-branch just to show the current commit
The die() routine adds a "fatal: " prefix, there is no reason to add
another one. Fixes code added in e65123a71d (builtin rebase: support
`git rebase <upstream> <switch-to>`, 2018-09-04).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set packet_trace_identity() for ls-remote. This replaces the generic
"git" identity in GIT_TRACE_PACKET=<file> traces to "ls-remote", e.g.:
[...] packet: upload-pack> version 2
[...] packet: upload-pack> agent=git/2.32.0-dev
[...] packet: ls-remote< version 2
[...] packet: ls-remote< agent=git/2.32.0-dev
Where in an "git ls-remote file://<path>" dialog ">" is the sender (or
"to the server") and "<" is the recipient (or "received by the
client").
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xmalloc() dies on error, allows zero-sized allocations and enforces
GIT_ALLOC_LIMIT for testing. Our mmap replacement doesn't need any of
that. Let's cut out the wrapper, reject zero-sized requests as required
by POSIX and use malloc(3) directly. Allocation errors were needlessly
handled by git_mmap() before; this code becomes reachable now.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On macOS, we use launchctl to manage the background maintenance
schedule. This uses a set of .plist files to describe the schedule, but
these files are also registered with 'launchctl bootstrap'. If multiple
'git maintenance start' commands run concurrently, then they can collide
replacing these schedule files and registering them with launchctl.
To avoid extra launchctl commands, do a check for the .plist files on
disk and check if they are registered using 'launchctl list <name>'.
This command will return with exit code 0 if it exists, or exit code 113
if it does not.
We can test this behavior using the GIT_TEST_MAINT_SCHEDULER environment
variable.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When two `git maintenance` processes try to write the `.plist` file, we
need to help them with serializing their efforts.
The 150ms time-out value was determined from thin air.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, $(pwd) returns a drive-letter style path C:/foo, while $PWD
contains a POSIX style /c/foo path. When we want to interpolate the
current directory in the PATH variable, we must not use the C:/foo style,
because the meaning of the colon is ambiguous. Use the POSIX style.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable D is never defined in test t5582, more severely the test
fails if D is defined by something outside the test suite, so remove
this spurious line.
Signed-off-by: Mickey Endito <mickey.endito.2323@protonmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new submodule--helper subcommand `run-update-procedure` that runs
the update procedure if the SHA1 of the submodule does not match what
the superproject expects.
This is an intermediate change that works towards total conversion of
`submodule update` from shell to C.
Specific error codes are returned so that the shell script calling the
subcommand can take a decision on the control flow, and preserve the
error messages across subsequent recursive calls of `cmd_update`.
This change is more focused on doing a faithful conversion, so for now we
are not too concerned with trying to reduce subprocess spawns.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the technical documentation to describe the multi-pack bitmap
format. This patch merely introduces the new format, and describes its
high-level ideas. Git does not yet know how to read nor write these
multi-pack variants, and so the subsequent patches will:
- Introduce code to interpret multi-pack bitmaps, according to this
document.
- Then, introduce code to write multi-pack bitmaps from the 'git
multi-pack-index write' sub-command.
Finally, the implementation will gain tests in subsequent patches (as
opposed to inline with the patch teaching Git how to write multi-pack
bitmaps) to avoid a cyclic dependency.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a new bitmap, the bitmap writer code attempts to read the
existing bitmap (if one is present). This is done in order to quickly
permute the bits of any bitmaps for commits which appear in the existing
bitmap, and were also selected for the new bitmap.
But since this code was added in 341fa34887 (pack-bitmap-write: use
existing bitmaps, 2020-12-08), the resources associated with opening an
existing bitmap were never released.
It's fine to ignore this, but it's bad hygiene. It will also cause a
problem for the multi-pack-index builtin, which will be responsible not
only for writing bitmaps, but also for expiring any old multi-pack
bitmaps.
If an existing bitmap was reused here, it will also be expired. That
will cause a problem on platforms which require file resources to be
closed before unlinking them, like Windows. Avoid this by ensuring we
close reused bitmaps with free_bitmap_index() before removing them.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The set of objects covered by a bitmap must be closed under
reachability, since it must be the case that there is a valid bit
position assigned for every possible reachable object (otherwise the
bitmaps would be incomplete).
Pack bitmaps are never written from 'git repack' unless repacking
all-into-one, and so we never write non-closed bitmaps (except in the
case of partial clones where we aren't guaranteed to have all objects).
But multi-pack bitmaps change this, since it isn't known whether the
set of objects in the MIDX is closed under reachability until walking
them. Plumb through a bit that is set when a reachable object isn't
found.
As soon as a reachable object isn't found in the set of objects to
include in the bitmap, bitmap_writer_build() knows that the set is not
closed, and so it now fails gracefully.
A test is added in t0410 to trigger a bitmap write without full
reachability closure by removing local copies of some reachable objects
from a promisor remote.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The special `--test-bitmap` mode of `git rev-list` is used to compare
the result of an object traversal with a bitmap to check its integrity.
This mode does not, however, assert that the types of reachable objects
are stored correctly.
Harden this mode by teaching it to also check that each time an object's
bit is marked, the corresponding bit should be set in exactly one of the
type bitmaps (whose type matches the object's true type).
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cherry-pick", upon seeing a conflict, says:
hint: after resolving the conflicts, mark the corrected paths
hint: with 'git add <paths>' or 'git rm <paths>'
hint: and commit the result with 'git commit'
as if running "git commit" to conclude the resolution of
this single step were the end of the story. This stems from
the fact that the command originally was to pick a single
commit and not a range of commits, and the message was
written back then and has not been adjusted.
When picking a range of commits and the command stops with a
conflict in the middle of the range, however, after
resolving the conflict and (optionally) recording the result
with "git commit", the user has to run "git cherry-pick
--continue" to have the rest of the range dealt with,
"--skip" to drop the current commit, or "--abort" to discard
the series.
Suggest use of "git cherry-pick --continue/--skip/--abort"
so that the message also covers the case where a range of
commits are being picked.
Similarly, this optimization can be applied to git revert,
suggest use of "git revert --continue/--skip/--abort" so
that the message also covers the case where a range of
commits are being reverted.
It is worth mentioning that now we use advice() to print
the content of GIT_CHERRY_PICK_HELP in print_advice(), each
line of output will start with "hint: ".
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Hariom Verma <hariom18599@gmail.com>
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a rebase is started with a --strategy option other than "ort" or
"recursive" then "merge -c" does not allow the user to reword the
commit message.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fast-forwarding we do not create a new commit so .git/MERGE_MSG
is not removed and can end up seeding the message of a commit made
after the rebase has finished. Avoid writing .git/MERGE_MSG when we
are fast-forwarding by writing the file after the fast-forward
checks. Note that there are no changes to the fast-forward code, it is
simply moved.
Note that the way this change is implemented means we no longer write
the author script when fast-forwarding either. I believe this is safe
for the reasons below but it is a departure from what we do when
fast-forwarding a non-merge commit. If we reword the merge then 'git
commit --amend' will keep the authorship of the commit we're rewording
as it ignores GIT_AUTHOR_* unless --reset-author is passed. It will
also export the correct GIT_AUTHOR_* variables to any hooks and we
already test the authorship of the reworded commit. If we are not
rewording then we no longer call spilt_ident() which means we are no
longer checking the commit author header looks sane. However this is
what we already do when fast-forwarding non-merge commits in
skip_unnecessary_picks() so I don't think we're breaking any promises
by not checking the author here.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
None of the existing reword tests check that there are no uncommitted
changes when the editor is opened. Reuse the editor script from the
last commit to fix this omission.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce warnings reported by git-po-helper to 23 which look like false
positives. Since Bulgarian uses Cyrillic we mark substitutable parts
in capitals rather than quoting with <> which saves two chars per term
(2.5% real estate on a 80 char line) plus it is safer and simpler as
the <> chars have special (sometimes destructive) meaning for the
shells. It is also easier for the user to parse. See for example
the message:
git mailinfo [<options>] <msg> <patch> < mail >info
where both <> characters serve multiple functions.
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
If the user runs git log while rewording a commit it is confusing if
sometimes we're amending the commit that's being reworded and at other
times we're creating a new commit depending on whether we could
fast-forward or not[1]. For this reason the reword command ensures
that there are no uncommitted changes when rewording. The reword
command also allows the user to edit the todo list while the rebase is
paused. As 'merge -c' also rewords commits make it behave like reword
and add a test.
[1] https://lore.kernel.org/git/xmqqlfvu4be3.fsf@gitster-ct.c.googlers.com/T/#m133009cb91cf0917bcf667300f061178be56680a
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The lock_ref_oid_basic() function has gradually been replaced by
most callers no longer performing a low-level "acquire lock,
update and release", and instead using the ref transaction API.
So there are only 4 remaining callers of lock_ref_oid_basic().
None of those callers pass REF_DELETING anymore, the last caller went
away in 92b1551b1d (refs: resolve symbolic refs first,
2016-04-25).
Before that we'd refactored and moved this code in:
- 8df4e51138 (struct ref_update: move "have_old" into "flags",
2015-02-17)
- 7bd9bcf372 (refs: split filesystem-based refs code into a new
file, 2015-11-09)
- 165056b2fc (lock_ref_for_update(): new function, 2016-04-24)
We then finally stopped using it in 92b1551b1d (noted above). So let's
remove the handling of this parameter.
By itself this change doesn't benefit us much, but it's the start of
even more removal of unused code in and around this function in
subsequent commits.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In e0cc8ac820 (packed_ref_store: make class into a subclass of
`ref_store`, 2017-06-23) a die() was added to packed_create_reflog(),
but not to any of the other reflog callbacks, let's do that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rules creating the $(LIB_FILE) and $(XDIFF_LIB) archives used to
be:
$(QUIET_AR)$(RM) $@ && $(AR) $(ARFLAGS) $@ $^
until commit 7b76d6bf22 (Makefile: add and use the ".DELETE_ON_ERROR"
flag, 2021-06-29) removed the '$(RM) $@' part, claiming that "we can
rely on the "c" (create) being present in ARFLAGS", and (I presume)
assuming that it means that the named archive is created from scratch.
Unfortunately, that's not what the 'c' flag does, it merely "Suppress
the diagnostic message that is written to standard error by default
when the archive is created" [1]. Consequently, all object files that
are already present in an existing archive and are not replaced will
remain there. This leads to linker errors in back-to-back builds of
different revisions without a 'make clean' between them if source
files going into these archives are renamed in between:
# The last commit renaming files that go into 'libgit.a':
# bc62692757 (hash-lookup: rename from sha1-lookup, 2020-12-31)
# sha1-lookup.c => hash-lookup.c | 14 +++++++-------
# sha1-lookup.h => hash-lookup.h | 12 ++++++------
$ git checkout bc62692757^
HEAD is now at 7a7d992d0d sha1-lookup: rename `sha1_pos()` as `hash_pos()`
$ make
[...]
$ git checkout 7b76d6bf22
HEAD is now at 7b76d6bf22 Makefile: add and use the ".DELETE_ON_ERROR" flag
$ make
[...]
AR libgit.a
LINK git
/usr/bin/ld: libgit.a(hash-lookup.o): in function `bsearch_hash':
/home/szeder/src/git/hash-lookup.c:105: multiple definition of `bsearch_hash'; libgit.a(sha1-lookup.o):/home/szeder/src/git/sha1-lookup.c:105: first defined here
collect2: error: ld returned 1 exit status
make: *** [Makefile:2213: git] Error 1
Restore the original make rules to first remove $(LIB_FILE) and
$(XDIFF_LIB) and then create them from scratch to avoid these build
errors.
[1] Quoting POSIX at:
https://pubs.opengroup.org/onlinepubs/9699919799/utilities/ar.html
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The cleanup of old compat wrappers in bash completion caused a
regression on tcsh completion that still uses them.
Let's update the tcsh call site as well for addressing it.
Fixes: 441ecdab37 ("completion: bash: remove old compat wrappers")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__gitcomp automatically adds a suffix, but __gitcomp_nl and others
don't, we need to specify a space by default.
Can be tested with:
git config branch.autoSetupMe<tab>
This fix only works for versions of bash greater than 4.0, before that
"local sfx" creates an empty string, therefore the unset expansion
doesn't work. The same happens in zsh.
Therefore we don't add the test for that for now.
The correct fix for all shells requires semantic changes in __gitcomp,
but that can be done later.
Cc: SZEDER Gábor <szeder.dev@gmail.com>
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to ignore options that don't start with -- as well.
Depending on the value of COMP_WORDBREAKS the last word could be
duplicated otherwise.
Can be tested with:
git merge -X diff-algorithm=<tab>
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise we are completely ignoring the --cur argument.
The issue can be tested with:
git clone --config=branch.<tab>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Codepath to access recently added oidtree data structure had
to make unaligned accesses to oids, which has been corrected.
* rs/oidtree-alignment-fix:
oidtree: avoid unaligned access to crit-bit tree
The flexible array member "k" of struct cb_node is used to store the key
of the crit-bit tree node. It offers no alignment guarantees -- in fact
the current struct layout puts it one byte after a 4-byte aligned
address, i.e. guaranteed to be misaligned.
oidtree uses a struct object_id as cb_node key. Since cf0983213c (hash:
add an algo member to struct object_id, 2021-04-26) it requires 4-byte
alignment. The mismatch is reported by UndefinedBehaviorSanitizer at
runtime like this:
hash.h:277:2: runtime error: member access within misaligned address 0x00015000802d for type 'struct object_id', which requires 4 byte alignment
0x00015000802d: note: pointer points here
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
^
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior hash.h:277:2 in
We can fix that by:
1. eliminating the alignment requirement of struct object_id,
2. providing the alignment in struct cb_node, or
3. avoiding the issue by only using memcpy to access "k".
Currently we only store one of two values in "algo" in struct object_id.
We could use a uint8_t for that instead and widen it only once we add
support for our twohundredth algorithm or so. That would not only avoid
alignment issues, but also reduce the memory requirements for each
instance of struct object_id by ca. 9%.
Supporting keys with alignment requirements might be useful to spread
the use of crit-bit trees. It can be achieved by using a wider type for
"k" (e.g. uintmax_t), using different types for the members "byte" and
"otherbits" (e.g. uint16_t or uint32_t for each), or by avoiding the use
of flexible arrays like khash.h does.
This patch implements the third option, though, because it has the least
potential for causing side-effects and we're close to the next release.
If one of the other options is implemented later as well to get their
additional benefits we can get rid of the extra copies introduced here.
Reported-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e9f79acb28 (ci: upgrade to using actions/{up,down}load-artifacts v2,
2021-06-23) changed all calls to that action from v1 to v2, but there
is still an open bug[1] that affects all nodejs actions and prevents
its use in 32-bit linux (as used by the Linux32 container)
move all dockerized jobs to use v1 that was built in C# and therefore
doesn't have this problem, which will otherwise manifest with confusing
messages like:
/usr/bin/docker exec 0285adacc4536b7cd962079c46f85fa05a71e66d7905b5e4b9b1a0e8b305722a sh -c "cat /etc/*release | grep ^ID"
OCI runtime exec failed: exec failed: container_linux.go:380: starting container process caused: no such file or directory: unknown
[1] https://github.com/actions/runner/issues/1011
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent changes to --fixup, adding amend suboption, caused the
--edit flag to be ignored as use_editor was always set to zero.
Restore edit_flag having higher priority than fixup_message when
deciding the value of use_editor by moving the edit flag condition
later in the method.
Signed-off-by: Joel Klinghed <the_jk@spawned.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate 48 new messages (5230t0f0u) for git 2.33.0, and also fixed
typos found by "git-po-helper".
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Fangyi Zhou <me@fangyi.io>
Format README.md using GFM (GitHub Flavored Markdown) syntax.
- In order to use more than 3 level headings, use ATX style headings
instead of setext style headings.
- In order to add highlights for code blocks, use fenced code blocks
instead of indented code blocks.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Update translation for following component:
* builtin/submodule--helper.c
Translate following new component:
* builtin/revert.c
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
* 'master' of github.com:git/git: (51 commits)
Git 2.33-rc2
object-file: use unsigned arithmetic with bit mask
Revert 'diff-merges: let "-m" imply "-p"'
object-store: avoid extra ';' from KHASH_INIT
oidtree: avoid nested struct oidtree_node
Git 2.33-rc1
test: fix for COLUMNS and bash 5
The eighth batch
diff: --pickaxe-all typofix
mingw: align symlinks-related rmdir() behavior with Linux
t7508: avoid non POSIX BRE
use fspathhash() everywhere
t0001: fix broken not-quite getcwd(3) test in bed67874e2
Documentation: render special characters correctly
reset: clear_unpack_trees_porcelain to plug leak
builtin/rebase: fix options.strategy memory lifecycle
builtin/merge: free found_ref when done
builtin/mv: free or UNLEAK multiple pointers at end of cmd_mv
convert: release strbuf to avoid leak
read-cache: call diff_setup_done to avoid leak
...
If the user skips the final commit by removing all the changes from
the index and worktree with 'git restore' (or read-tree) and then runs
'git rebase --continue' .git/MERGE_MSG is left behind. This will seed
the commit message the next time the user commits which is not what we
want to happen.
Reported-by: Victor Gambier <vgambier@excilys.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
980b482d28 ("rebase tests: mark tests specific to the am-backend with
--am", 2020-02-15) sought to prepare tests testing the "apply" backend
in preparation for 2ac0d6273f ("rebase: change the default backend
from "am" to "merge"", 2020-02-15). However some tests seem to have
been missed leading to us testing the "merge" backend twice. This
patch fixes some cases that I noticed while adding tests to these
files, I have not audited all the other rebase test files. I've
reworded a couple of the test descriptions to make it clear which
backend they are testing.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Setting GIT_AUTHOR_* when committing with --amend will only change the
author if we also pass --reset-author. This commit is used in some
tests that ensure the author ident does not change when rebasing.
Creating this commit without changing the authorship meant that the
test would not catch regressions that caused rebase to discard the
original authorship information.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
make sure it uses a supported OS branch and uses all the resources
that can be allocated efficiently.
while only 1GB of memory is needed, 2GB is the minimum for a 2 CPU
machine (the default), but by increasing parallelism wall time has
been reduced by 35%.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Function `traverse_trees_and_blobs` not only works on trees and blobs,
but also on tags, the function name is somewhat misleading. This commit
rename it to `traverse_non_commits`.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin reported possible typos in po/id.po, all of them are mismatch
variable names. Fix them.
Reported-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
In this test, we currently use the SHA1 prerequisite to specify the
algorithm we're using to test, since SHA-256 bundles are always v3,
whereas SHA-1 bundles default to v2, and as a result the default output
differs.
However, this causes a problem if we run with GIT_TEST_FAIL_PREREQS set,
since that means that we'll unexpectedly fail the SHA1 prerequisite,
resulting in incorrect expected output. Let's fix this by checking
against the built-in data called "algo", which tells us which algorithm
is in use. This should work in any situation, making our test a little
more robust.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier "git log -m" was changed to always produce patch output,
which would break existing scripts, which has been reverted.
* jn/log-m-does-not-imply-p:
Revert 'diff-merges: let "-m" imply "-p"'
Build fix.
* cb/many-alternate-optim-fixup:
object-file: use unsigned arithmetic with bit mask
object-store: avoid extra ';' from KHASH_INIT
oidtree: avoid nested struct oidtree_node
similar to the recently added sparse task, it is nice to know as early
as possible.
add a dockerized build using fedora (that usually has the latest gcc)
to be ahead of the curve and avoid older ISO C issues at the same time.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the git diff hunk headers show the wrong method signature if the
method has a qualified return type, an array return type, or a generic return
type because the regex doesn't allow dots (.), [], or < and > in the return
type. Also, type parameter declarations couldn't be matched.
Add several t4018 tests asserting the right hunk headers for different cases:
- enum constant change
- change in generic method with bounded type parameters
- change in generic method with wildcard
- field change in a nested class
Signed-off-by: Tassilo Horn <tsdh@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remind developers that they do not need to go overboard to implement
patterns to prepare for invalid constructs. They only have to be
sufficiently permissive, assuming that the payload is syntactically
correct, and that may allow them to be simpler.
Text stolen mostly from, and further improved by, Johannes Sixt.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
33f379eee6 (make object_directory.loose_objects_subdir_seen a bitmap,
2021-07-07) replaced a wasteful 256-byte array with a 32-byte array
and bit operations. The mask calculation shifts a literal 1 of type
int left by anything between 0 and 31. UndefinedBehaviorSanitizer
doesn't like that and reports:
object-file.c:2477:18: runtime error: left shift of 1 by 31 places cannot be represented in type 'int'
Make sure to use an unsigned 1 instead to avoid the issue.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ds/add-with-sparse-index:
add: remove ensure_full_index() with --renormalize
add: ignore outside the sparse-checkout in refresh()
pathspec: stop calling ensure_full_index
add: allow operating on a sparse-only index
t1092: test merge conflicts outside cone
It is useful for performance monitoring and debugging purposes to know
the wire protocol used for remote operations. This may differ from the
version set in local configuration due to differences in version and/or
configuration between the server and the client. Therefore, log the
negotiated wire protocol version via trace2, for both clients and
servers.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's rename 'compute_submodule_clone_url()' to 'resolve_relative_url()'
to make it clear that this internal helper need not be used exclusively
for computing submodule clone URLs.
Since the original 'resolve-relative-url' subcommand and its C entry
point has been removed in c461095ae3 (submodule--helper: remove
resolve-relative-url subcommand, 2021-07-02), this rename can be done
without causing any confusion about which function it actually binds to.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell subcommand `resolve-relative-url` is no longer required, as
its last caller has been removed when it was converted to C.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also no longer needed is this subcommand, as all of its functionality is
being called by the newly-introduced `module_add()` directly within C.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We no longer need this subcommand, as all of its functionality is being
called by the newly-introduced `module_add()` directly within C.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce the 'add' subcommand to `submodule--helper.c` that does all
the work 'submodule add' past the parsing of flags.
We also remove the constness of the sm_path field of the `add_data`
struct. This is needed so that it can be modified by
normalize_path_copy().
As with the previous conversions, this is meant to be a faithful
conversion with no modification to the behaviour of `submodule add`.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Helped-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Based-on-patch-by: Shourya Shukla <periperidip@gmail.com>
Based-on-patch-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These functions can be useful to other parts of Git. Let's move them to
dir.c, while renaming them to be make their functionality more explicit.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This part of `sync_submodule()` is doing the same thing that
`compute_submodule_clone_url()` is doing. Let's reuse that helper here.
Note that this change adds a small overhead where we allocate and free
the 'remote' twice, but that is a small price to pay for the higher
level of abstraction we get.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the helper function to resolve a relative url, by reusing the
existing `compute_submodule_clone_url()` function.
`compute_submodule_clone_url()` performs the same work that
`resolve_relative_url()` is doing, so we eliminate this code repetition
by moving the former function's definition up, and calling it inside
`resolve_relative_url()`.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's modify the interface to `compute_submodule_clone_url()` function
by adding two more arguments, so that we can reuse this in various parts
of `submodule--helper.c` that follow a common pattern, which is--read
the remote url configuration of the superproject and then call
`relative_url()`.
This function is nearly identical to `resolve_relative_url()`, the only
difference being the extra warning message. We can add a quiet flag to
it, to suppress that warning when not needed, and then refactor
`resolve_relative_url()` by using this function, something we will do in
the next patch.
We also rename the local variable 'relurl' to avoid potential confusion
with the 'rel_url' parameter while we are at it.
Having this functionality factored out will be useful for converting the
rest of `submodule add` in subsequent patches.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We parse through binary hunks by looping through the buffer with code
like:
llen = linelen(buffer, size);
...do something with the line...
buffer += llen;
size -= llen;
However, before we enter the loop, there is one call that increments
"buffer" but forgets to decrement "size". As a result, our "size" is off
by the length of that line, and subsequent calls to linelen() may look
past the end of the buffer for a newline.
The fix is easy: we just need to decrement size as we do elsewhere.
This bug goes all the way back to 0660626caf (binary diff: further
updates., 2006-05-05). Presumably nobody noticed because it only
triggers if the patch is corrupted, and even then we are often "saved"
by luck. We use a strbuf to store the incoming patch, so we overallocate
there, plus we add a 16-byte run of NULs as slop for memory comparisons.
So if this happened accidentally, the common case is that we'd just read
a few uninitialized bytes from the end of the strbuf before producing
the expected "this patch is corrupted" error complaint.
However, it is possible to carefully construct a case which reads off
the end of the buffer. The included test does so. It will pass both
before and after this patch when run normally, but using a tool like
ASan shows that we get an out-of-bounds read before this patch, but not
after.
Reported-by: Xingman Chen <xichixingman@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we iterate through the buffer containing git-log output, parsing
lines, we use an "int" to store the size of an individual line. This
should be a size_t, as we have no guarantee that there is not a
malicious 2GB+ commit-message line in the output.
Overflowing this integer probably doesn't do anything _too_ terrible. We
are not using the value to size a buffer, so the worst case is probably
an out-of-bounds read from before the array. But it's easy enough to
fix.
Note that we have to use ssize_t here, since we also store the length
result from parse_git_diff_header(), which may return a negative value
for error. That function actually returns an int itself, which has a
similar overflow problem, but I'll leave that for another day. Much
of the apply.c code uses ints and should be converted as a whole; in the
meantime, a negative return from parse_git_diff_header() will be
interpreted as an error, and we'll bail (so we can't handle such a case,
but given that it's likely to be malicious anyway, the important thing
is we don't have any memory errors).
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing our buffer of output from git-log, we have a
find_end_of_line() helper that finds the next newline, and gives us the
number of bytes to move past it, or the size of the whole remaining
buffer if there is no newline.
But trying to handle both those cases leads to some oddities:
- we try to overwrite the newline with NUL in the caller, by writing
over line[len-1]. This is at best redundant, since the helper will
already have done so if it saw a newline. But if it didn't see a
newline, it's actively wrong; we'll overwrite the byte at the end of
the (unterminated) line.
We could solve this just dropping the extra NUL assignment in the
caller and just letting the helper do the right thing. But...
- if we see a "diff --git" line, we'll restore the newline on top of
the NUL byte, so we can pass the string to parse_git_diff_header().
But if there was no newline in the first place, we can't do this.
There's no place to put it (the current code writes a newline
over whatever byte we obliterated earlier). The best we can do is
feed the complete remainder of the buffer to the function (which is,
in fact, a string, by virtue of being a strbuf).
To solve this, the caller needs to know whether we actually found a
newline or not. We could modify find_end_of_line() to return that
information, but we can further observe that it has only one caller.
So let's just inline it in that caller.
Nobody seems to have noticed this case, probably because git-log would
never produce input that doesn't end with a newline. Arguably we could
just return an error as soon as we see that the output does not end in a
newline. But the code to do so actually ends up _longer_, mostly because
of the cleanup we have to do in handling the error.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "offset" variable was was introduced in 44b67cb62b (range-diff:
split lines manually, 2019-07-11), but it has never done anything
useful. We use it to count up the number of bytes we've consumed, but we
never look at the result. It was probably copied accidentally from an
almost-identical loop in apply.c:find_header() (and the point of that
commit was to make use of the parse_git_diff_header() function which
underlies both).
Because the variable was set but not used, most compilers didn't seem to
notice, but the upcoming clang-14 does complain about it, via its
-Wunused-but-set-variable warning.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new "add-config" subcommand to `git submodule--helper` with the
goal of converting part of the shell code in git-submodule.sh related to
`git submodule add` into C code. This new subcommand sets the
configuration variables of a newly added submodule, by registering the
url in local git config, as well as the submodule name and path in the
.gitmodules file. It also sets 'submodule.<name>.active' to "true" if
the submodule path has not already been covered by any pathspec
specified in 'submodule.active'.
This is meant to be a faithful conversion from shell to C, although we
add comments to areas that could be improved in future patches, after
the conversion has settled.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Based-on-patch-by: Shourya Shukla <periperidip@gmail.com>
Based-on-patch-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit f5bfcc823b, which
made "git log -m" imply "--patch" by default. The logic was that
"-m", which makes diff generation for merges perform a diff against
each parent, has no use unless I am viewing the diff, so we could save
the user some typing by turning on display of the resulting diff
automatically. That wasn't expected to adversely affect scripts
because scripts would either be using a command like "git diff-tree"
that already emits diffs by default or would be combining -m with a
diff generation option such as --name-status. By saving typing for
interactive use without adversely affecting scripts in the wild, it
would be a pure improvement.
The problem is that although diff generation options are only relevant
for the displayed diff, a script author can imagine them affecting
path limiting. For example, I might run
git log -w --format=%H -- README
hoping to list commits that edited README, excluding whitespace-only
changes. In fact, a whitespace-only change is not TREESAME so the use
of -w here has no effect (since we don't apply these diff generation
flags to the diff_options struct rev_info::pruning used for this
purpose), but the documentation suggests that it should work
Suppose you specified foo as the <paths>. We shall call
commits that modify foo !TREESAME, and the rest TREESAME. (In
a diff filtered for foo, they look different and equal,
respectively.)
and a script author who has not tested whitespace-only changes
wouldn't notice.
Similarly, a script author could include
git log -m --first-parent --format=%H -- README
to filter the first-parent history for commits that modified README.
The -m is a no-op but it reflects the script author's intent. For
example, until 1e20a407fe (stash list: stop passing "-m" to "git
log", 2021-05-21), "git stash list" did this.
As a result, we can't safely change "-m" to imply "-p" without fear of
breaking such scripts. Restore the previous behavior.
Noticed because Rust's src/bootstrap/bootstrap.py made use of this
same construct: https://github.com/rust-lang/rust/pull/87513. That
script has been updated to omit the unnecessary "-m" option, but we
can expect other scripts in the wild to have similar expectations.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When queueing references in git-rev-list(1), we try to optimize parsing
of commits via the commit-graph. To do so, we first look up the object's
type, and if it is a commit we call `repo_parse_commit()` instead of
`parse_object()`. This is quite inefficient though given that we're
always uncompressing the object header in order to determine the type.
Instead, we can opportunistically search the commit-graph for the object
ID: in case it's found, we know it's a commit and can directly fill in
the commit object without having to uncompress the object header.
Expose a new function `lookup_commit_in_graph()`, which tries to find a
commit in the commit-graph by ID, and convert `get_reference()` to use
this function. This provides a big performance win in cases where we
load references in a repository with lots of references pointing to
commits. The following has been executed in a real-world repository with
about 2.2 million refs:
Benchmark #1: HEAD~: rev-list --unsorted-input --objects --quiet --not --all --not $newrev
Time (mean ± σ): 4.458 s ± 0.044 s [User: 4.115 s, System: 0.342 s]
Range (min … max): 4.409 s … 4.534 s 10 runs
Benchmark #2: HEAD: rev-list --unsorted-input --objects --quiet --not --all --not $newrev
Time (mean ± σ): 3.089 s ± 0.015 s [User: 2.768 s, System: 0.321 s]
Range (min … max): 3.061 s … 3.105 s 10 runs
Summary
'HEAD: rev-list --unsorted-input --objects --quiet --not --all --not $newrev' ran
1.44 ± 0.02 times faster than 'HEAD~: rev-list --unsorted-input --objects --quiet --not --all --not $newrev'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `find_commit_in_graph()` assumes that the caller has passed
an object which was already determined to be a commit given that it will
access the commit's graph position, which is stored in a commit slab. In
a subsequent patch, we want to search for an object ID though without
knowing whether it is a commit or not, which is not currently possible.
Split out the logic to search the commit graph for a given object ID to
prepare for this change. This commit also renames the function to
`find_commit_pos_in_graph()`, which more accurately reflects what this
function does. Furthermore, in order to allow for the searched object ID
to be const, we need to adjust `bsearch_graph()`'s signature to accept a
constant object ID as input, too.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When queueing up references for the revision walk, `handle_one_ref()`
will resolve the reference's object ID via `get_reference()` and then
queue the ID as pending object via `add_pending_oid()`. But given that
`add_pending_oid()` is only a thin wrapper around `add_pending_object()`
which fist calls `get_reference()`, we effectively resolve the reference
twice and thus duplicate some of the work.
Fix the issue by instead calling `add_pending_object()` directly, which
takes the already-resolved object as input. In a repository with lots of
refs, this translates into a near 10% speedup:
Benchmark #1: HEAD~: rev-list --unsorted-input --objects --quiet --not --all --not $newrev
Time (mean ± σ): 5.015 s ± 0.038 s [User: 4.698 s, System: 0.316 s]
Range (min … max): 4.970 s … 5.089 s 10 runs
Benchmark #2: HEAD: rev-list --unsorted-input --objects --quiet --not --all --not $newrev
Time (mean ± σ): 4.606 s ± 0.029 s [User: 4.260 s, System: 0.345 s]
Range (min … max): 4.565 s … 4.657 s 10 runs
Summary
'HEAD: rev-list --unsorted-input --objects --quiet --not --all --not $newrev' ran
1.09 ± 0.01 times faster than 'HEAD~: rev-list --unsorted-input --objects --quiet --not --all --not $newrev'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to compute whether objects reachable from a set of tips are all
connected, we do a revision walk with these tips as positive references
and `--not --all`. `--not --all` will cause the revision walk to load
all preexisting references as uninteresting, which can be very expensive
in repositories with many references.
Benchmarking the git-rev-list(1) command highlights that by far the most
expensive single phase is initial sorting of the input revisions: after
all references have been loaded, we first sort commits by author date.
In a real-world repository with about 2.2 million references, it makes
up about 40% of the total runtime of git-rev-list(1).
Ultimately, the connectivity check shouldn't really bother about the
order of input revisions at all. We only care whether we can actually
walk all objects until we hit the cut-off point. So sorting the input is
a complete waste of time.
Introduce a new "--unsorted-input" flag to git-rev-list(1) which will
cause it to not sort the commits and adjust the connectivity check to
always pass the flag. This results in the following speedups, executed
in a clone of gitlab-org/gitlab [1]:
Benchmark #1: git rev-list --objects --quiet --not --all --not $(cat newrev)
Time (mean ± σ): 7.639 s ± 0.065 s [User: 7.304 s, System: 0.335 s]
Range (min … max): 7.543 s … 7.742 s 10 runs
Benchmark #2: git rev-list --unsorted-input --objects --quiet --not --all --not $newrev
Time (mean ± σ): 4.995 s ± 0.044 s [User: 4.657 s, System: 0.337 s]
Range (min … max): 4.909 s … 5.048 s 10 runs
Summary
'git rev-list --unsorted-input --objects --quiet --not --all --not $(cat newrev)' ran
1.53 ± 0.02 times faster than 'git rev-list --objects --quiet --not --all --not $newrev'
[1]: https://gitlab.com/gitlab-org/gitlab.git. Note that not all refs
are visible to clients.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
d540b70c85 (merge: cleanup messages like commit, 2019-04-17) adds
a way to change part of the helper text using a single call to
strbuf_add_commented_addf but with two formats with varying number
of parameters.
this trigger a warning in old versions of Xcode (ex 8.0), so use
instead two independent calls with a matching number of parameters
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cf2dc1c238 (speed up alt_odb_usable() with many alternates, 2021-07-07)
introduces a KHASH_INIT invocation with a trailing ';', which while
commonly expected will trigger warnings with pedantic on both
clang[-Wextra-semi] and gcc[-Wpedantic], because that macro has already
a semicolon and is meant to be invoked without one.
while fixing the macro would be a worthy solution (specially considering
this is a common recurring problem), remove the extra ';' for now to
minimize churn.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
92d8ed8ac1 (oidtree: a crit-bit tree for odb_loose_cache, 2021-07-07)
adds a struct oidtree_node that contains only an n field with a
struct cb_node.
unfortunately, while building in pedantic mode witch clang 12 (as well
as a similar error from gcc 11) it will show:
oidtree.c:11:17: error: 'n' may not be nested in a struct due to flexible array member [-Werror,-Wflexible-array-extensions]
struct cb_node n;
^
because of a constrain coded in ISO C 11 6.7.2.1¶3 that forbids using
structs that contain a flexible array as part of another struct.
use a strict cb_node directly instead.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The case statement in detect-compiler notices 'clang', 'FreeBSD
clang' and 'Apple clang', but there are other platforms that follow
the '$VENDOR clang' pattern (e.g. Debian).
Generalize the pattern to catch them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_family and get_version helpers of detect-compiler assume
that the line to identify the version from the compilers have a
token "version", followed by the version number, followed by some
other string, e.g.
$ CC=gcc get_version_line
gcc version 10.2.1 20210110 (Debian 10.2.1-6)
But that is not necessarily true, e.g.
$ CC=clang get_version_line
Debian clang version 11.0.1-2
Tweak the script not to require extra string after the version.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1da1580e4c (Makefile: detect compiler and enable more warnings in
DEVELOPER=1, 2018-04-14) uses the output of the compiler banner to
detect the compiler family.
Apple had since changed the wording used to refer to its compiler
as clang instead of LLVM as shown by:
$ cc --version
Apple clang version 12.0.5 (clang-1205.0.22.9)
Target: x86_64-apple-darwin20.6.0
Thread model: posix
InstalledDir: /Library/Developer/CommandLineTools/usr/bin
so update the script to match, and allow DEVELOPER=1 to work as
expected again in macOS.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c49a177bec (test-lib.sh: set COLUMNS=80 for --verbose
repeatability, 2021-06-29) multiple tests have been failing when using
bash 5 because checkwinsize is enabled by default, therefore COLUMNS is
reset using TIOCGWINSZ even for non-interactive shells.
It's debatable whether or not bash should even be doing that, but for
now we can avoid this undesirable behavior by disabling this option.
Reported-by: Fabian Stelzer <fabian.stelzer@campoint.net>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
[jc: with SZEDER Gábor's suggestion to do this before setting COLUMNS]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear that `ort` is the default merge strategy now rather than
`recursive`, including moving `ort` to the front of the list of merge
strategies.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few reasons to switch the default:
* Correctness
* Extensibility
* Performance
I'll provide some summaries about each.
=== Correctness ===
The original impetus for a new merge backend was to fix issues that were
difficult to fix within recursive's design. The success with this goal
is perhaps most easily demonstrated by running the following:
$ git grep -2 KNOWN_FAILURE t/ | grep -A 4 GIT_TEST_MERGE_ALGORITHM
$ git grep test_expect_merge_algorithm.failure.success t/
$ git grep test_expect_merge_algorithm.success.failure t/
In order, these greps show:
* Seven sets of submodule tests (10 total tests) that fail with
recursive but succeed with ort
* 22 other tests that fail with recursive, but succeed with ort
* 0 tests that pass with recursive, but fail with ort
=== Extensibility ===
Being able to perform merges without touching the working tree or index
makes it possible to create new features that were difficult with the
old backend:
* Merging, cherry-picking, rebasing, reverting in bare repositories...
or just on branches that aren't checked out.
* `git diff AUTO_MERGE` -- ability to see what changes the user has
made to resolve conflicts so far (see commit 5291828df8 ("merge-ort:
write $GIT_DIR/AUTO_MERGE whenever we hit a conflict", 2021-03-20)
* A --remerge-diff option for log/show, used to show diffs for merges
that display the difference between what an automatic merge would
have created and what was recorded in the merge. (This option will
often result in an empty diff because many merges are clean, but for
the non-clean ones it will show how conflicts were fixed including
the removal of conflict markers, and also show additional changes
made outside of conflict regions to e.g. fix semantic conflicts.)
* A --remerge-diff-only option for log/show, similar to --remerge-diff
but also showing how cherry-picks or reverts differed from what an
automatic cherry-pick or revert would provide.
The last three have been implemented already (though only one has been
submitted upstream so far; the others were waiting for performance work
to complete), and I still plan to implement the first one.
=== Performance ===
I'll quote from the summary of my final optimization for merge-ort
(while fixing the testcase name from 'no-renames' to 'few-renames'):
Timings
Infinite
merge- merge- Parallelism
recursive recursive of rename merge-ort
v2.30.0 current detection current
---------- --------- ----------- ---------
few-renames: 18.912 s 18.030 s 11.699 s 198.3 ms
mega-renames: 5964.031 s 361.281 s 203.886 s 661.8 ms
just-one-mega: 149.583 s 11.009 s 7.553 s 264.6 ms
Speedup factors
Infinite
merge- merge- Parallelism
recursive recursive of rename
v2.30.0 current detection merge-ort
---------- --------- ----------- ---------
few-renames: 1 1.05 1.6 95
mega-renames: 1 16.5 29 9012
just-one-mega: 1 13.6 20 565
And, for partial clone users:
Factor reduction in number of objects needed
Infinite
merge- merge- Parallelism
recursive recursive of rename
v2.30.0 current detection merge-ort
---------- --------- ----------- ---------
mega-renames: 1 1 1 181.3
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--no-walk` flag supports two modes: either it sorts the revisions
given as input input or it doesn't. This is reflected in a single
`no_walk` flag, which reflects one of the three states "walk", "don't
walk but without sorting" and "don't walk but with sorting".
Split up the flag into two separate bits, one indicating whether we
should walk or not and one indicating whether the input should be sorted
or not. This will allow us to more easily introduce a new flag
`--unsorted-input`, which only impacts the sorting bit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the "tags", "TAGS" and "cscope.out" targets rely on piping into
xargs with an "echo <list> | xargs" pattern, we need to make sure
we're in an append mode.
Unlike my recent change to make use of ".DELETE_ON_ERROR" in
7b76d6bf22 (Makefile: add and use the ".DELETE_ON_ERROR" flag,
2021-06-29), we really do need the "rm $@+" at the beginning (note,
not "rm $@").
This is because the xargs command may decide to invoke the program
multiple times. We need to make sure we've got a union of its results
at the end.
For "ctags" and "etags" we used the "-a" flag for this, for cscope
that behavior is the default. Its "-u" flag disables its equivalent of
an implicit "-a" flag.
Let's also consistently use the $@ and $@+ names instead of needlessly
hardcoding or referring to more verbose names in the "tags" and "TAGS"
rules.
These targets could perhaps be improved in the future by factoring
this "echo <list> | xargs" pattern so that we make intermediate tags
files for each source file, and then assemble them into one "tags"
file at the end.
The etags manual page suggests that doing that (or perhaps just
--update) might be counter-productive, in any case, the tag building
is fast enough for me, so I'm leaving that for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before we generate a "cscope.out" file, remove that file explicitly,
and not everything matching "cscope*". This doesn't change any
behavior of the Makefile in practice, but makes this rule less
confusing, and consistent with other similar rules.
The cscope target was added in a2a9150bf0 (makefile: Add a cscope
target, 2007-10-06). It has always referred to cscope* instead of to
cscope.out in .gitignore and the "clean" target, even though we only
ever generated a cscope.out file.
This was seemingly done to aid use-cases where someone invoked cscope
with the "-q" flag, which would make it create a "cscope.in.out" and
"cscope.po.out" files in addition to "cscope.out".
But us removing those files we never generated is confusing, so let's
only remove the file we need to, furthermore let's use the "-f" flag
to explicitly name the cscope.out file, even though it's the default
if not "-f" argument is supplied.
It is somewhat inconsistent to change from the glob here but not in
the "clean" rule and .gitignore, an earlier version of this change
updated those as well, but see [1][2] for why they were kept.
1. https://lore.kernel.org/git/87k0lit57x.fsf@evledraar.gmail.com/
2. https://lore.kernel.org/git/87im0kn983.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --advertise-refs documentation in git-upload-pack added in
9812f2136b (upload-pack.c: use parse-options API, 2016-05-31) hasn't
been entirely true ever since v2 support was implemented in
e52449b672 (connect: request remote refs using v2, 2018-03-15). Under
v2 we don't advertise the refs at all, but rather dump the
capabilities header.
This option has always been an obscure internal implementation detail,
it wasn't even documented for git-receive-pack. Since it has exactly
one user let's rename it to --http-backend-info-refs, which is more
accurate and points the reader in the right direction. Let's also
cross-link this from the protocol v1 and v2 documentation.
I'm retaining a hidden --advertise-refs alias in case there's any
external users of this, and making both options hidden to the bash
completion (as with most other internal-only options).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "advertise capabilities" mode of serve.c added in
ed10cb952d (serve: introduce git-serve, 2018-03-15) is only used by
the http-backend.c to call {upload,receive}-pack with the
--advertise-refs parameter. See 42526b478e (Add stateless RPC options
to upload-pack, receive-pack, 2009-10-30).
Let's just make cmd_upload_pack() take the two (v2) or three (v2)
parameters the the v2/v1 servicing functions need directly, and pass
those in via the function signature. The logic of whether daemon mode
is implied by the timeout belongs in the v1 function (only used
there).
Once we split up the "advertise v2 refs" from "serve v2 request" it
becomes clear that v2 never cared about those in combination. The only
time it mattered was for v1 to emit its ref advertisement, in that
case we wanted to emit the smart-http-only "no-done" capability.
Since we only do that in the --advertise-refs codepath let's just have
it set "do_done" itself in v1's upload_pack() just before send_ref(),
at that point --advertise-refs and --stateless-rpc in combination are
redundant (the only user is get_info_refs() in http-backend.c), so we
can just pass in --advertise-refs only.
Since we need to touch all the serve() and advertise_capabilities()
codepaths let's rename them to less clever and obvious names, it's
been suggested numerous times, the latest of which is [1]'s suggestion
for protocol_v2_serve_loop(). Let's go with that.
1. https://lore.kernel.org/git/CAFQ2z_NyGb8rju5CKzmo6KhZXD0Dp21u-BbyCb2aNxLEoSPRJw@mail.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --advertise-refs option had no explicit tests of its own, only
other http tests that would fail at a distance if it it was
broken. Let's test its behavior explicitly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The advertise_capabilities() is only called from serve() and we always
emit this version line before it. In a subsequent commit I'll make
builtin/upload-pack.c sometimes call advertise_capabilities()
directly, so it'll make sense to have this line emitted by
advertise_capabilities(), not serve() itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 6b5b6e422e (serve: advertise session ID in v2 capabilities,
2020-11-11) the check for transfer.advertiseSID was added to the
beginning of the main serve() loop. Thus on startup of the server we'd
populate it.
Let's instead use an explicit lazy initialization pattern in
session_id_advertise() itself, we'll still look the config up only
once per-process, but by moving it out of serve() itself the further
changing of that routine becomes easier.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The serve.c API added in ed10cb952d (serve: introduce git-serve,
2018-03-15) was passing in the raw capabilities "keys", but nothing
downstream of it ever used them.
Let's remove that code because it's not needed. If we do end up
needing to pass information about the advertisement in the future
it'll make more sense to have serve.c parse the capabilities keys and
pass the result of its parsing, rather than expecting expecting its
API users to parse the same keys again.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the declaration of the protocol_capability struct to use
designated initializers, this makes this more verbose now, but a
follow-up commit will add a new field. At that point these lines would
be too dense to be on one line comfortably.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the assignments to the various transport_vtables to use
designated initializers, this makes the code easier to read and
maintain.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the "fetch" member of the transport_vtable to "fetch_refs" for
consistency with the existing "push_refs". Neither of them just push
"refs" but refs and objects, but having the two match makes the code
more readable than having it be inconsistent, especially since
"fetch_refs" is a lot easier to grep for than "fetch".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The has_capability() function introduced in ed10cb952d (serve:
introduce git-serve, 2018-03-15) has never been used anywhere except
serve.c, so let's mark it as static.
It was later changed from "extern" in 554544276a (*.[ch]: remove
extern from function declarations using spatch, 2019-04-29), but we
could have simply marked it as "static" instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were two locations in the code that referred to 'merge-recursive'
but which were also applicable to 'merge-ort'. Update them to more
general wording.
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 58634dbff8 ("rebase: Allow merge strategies to be used when
rebasing", 2006-06-21) added the --merge option to git-rebase so that
renames could be detected (at least when using the `recursive` merge
backend). However, git-am -3 gained that same ability in commit
579c9bb198 ("Use merge-recursive in git-am -3.", 2006-12-28). As such,
the comment about being able to detect renames is not particularly
noteworthy. Remove it.
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have diff-algorithm that explains why there are special diff
algorithms, so we do not need to re-explain patience. patience exists
as its own toplevel option for historical reasons, but there's no reason
to give it special preference or document it again and suggest it's more
important than other diff algorithms, so just refer to it as a
deprecated shorthand for `diff-algorithm=patience`.
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stating that the recursive strategy "currently cannot make use of
detected copies" implies that this is a technical shortcoming of the
current algorithm. I disagree with that. I don't see how copies could
possibly be used in a sane fashion in a merge algorithm -- would we
propagate changes in one file on one side of history to each copy of
that file when merging? That makes no sense to me. I cannot think of
anything else that would make sense either. Change the wording to
simply state that we ignore any copies.
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is probably helpful to cover the default merge strategy first, so
move the text for the resolve strategy to later in the document.
Further, the wording for "resolve" claimed that it was "considered
generally safe and fast", which might imply in some readers minds that
the same is not true of other strategies. Rather than adding this text
to all the strategies, just remove it from this one.
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few places in the documentation referred to the "`recursive` strategy"
using the phrase "`git merge-recursive`", suggesting that it was forking
subprocesses to call a toplevel builtin. Perhaps that was relevant to
when rebase was a shell script, but it seems like a rather indirect way
to refer to the `recursive` strategy. Simplify the references.
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 0c4fd732f0 ("Move computation of dir_rename_count from
merge-ort to diffcore-rename", 2021-02-27), much of the logic for
computing directory renames moved into diffcore-rename.
directory-rename-detection.txt had claims that all of that logic was
found in merge-recursive. Update the documentation.
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --rebase-merges was first introduced, it only worked with the
`recursive` strategy. Some time later, it gained support for merges
using the `octopus` strategy. The limitation of only supporting these
two strategies was documented in 25cff9f109 ("rebase -i --rebase-merges:
add a section to the man page", 2018-04-25) and lifted in e145d99347
("rebase -r: support merge strategies other than `recursive`",
2019-07-31). However, when the limitation was lifted, the documentation
was not updated. Update it now.
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows rmdir() equivalent behaves differently from POSIX ones in
that when used on a symbolic link that points at a directory, the
target directory gets removed, which has been corrected.
* tb/mingw-rmdir-symlink-to-directory:
mingw: align symlinks-related rmdir() behavior with Linux
The local changes stashed by "git merge --autostash" were lost when
the merge failed in certain ways, which has been corrected.
* pb/merge-autostash-more:
merge: apply autostash if merge strategy fails
merge: apply autostash if fast-forward fails
Documentation: define 'MERGE_AUTOSTASH'
merge: add missing word "strategy" to a message
Further optimization on "merge -sort" backend.
* en/ort-perf-batch-14:
merge-ort: restart merge with cached renames to reduce process entry cost
merge-ort: avoid recursing into directories when we don't need to
merge-ort: defer recursing into directories when merge base is matched
merge-ort: add a handle_deferred_entries() helper function
merge-ort: add data structures for allowable trivial directory resolves
merge-ort: add some more explanations in collect_merge_info_callback()
merge-ort: resolve paths early when we have sufficient information
Reorganize and update the SubmitingPatches document.
* ab/update-submitting-patches:
SubmittingPatches: replace discussion of Travis with GitHub Actions
SubmittingPatches: move discussion of Signed-off-by above "send"
Leak plugging.
* ah/plugleaks:
reset: clear_unpack_trees_porcelain to plug leak
builtin/rebase: fix options.strategy memory lifecycle
builtin/merge: free found_ref when done
builtin/mv: free or UNLEAK multiple pointers at end of cmd_mv
convert: release strbuf to avoid leak
read-cache: call diff_setup_done to avoid leak
ref-filter: also free head for ATOM_HEAD to avoid leak
diffcore-rename: move old_dir/new_dir definition to plug leak
builtin/for-each-repo: remove unnecessary argv copy to plug leak
builtin/submodule--helper: release unused strbuf to avoid leak
environment: move strbuf into block to plug leak
fmt-merge-msg: free newly allocated temporary strings when done
Rewrite of "git submodule" in C continues.
* ar/submodule-add:
submodule: drop unused sm_name parameter from show_fetch_remotes()
submodule--helper: introduce add-clone subcommand
submodule--helper: refactor module_clone()
submodule: prefix die messages with 'fatal'
t7400: test failure to add submodule in tracked path
When doing reference negotiation, git-fetch-pack(1) is loading all refs
from disk in order to determine which commits it has in common with the
remote repository. This can be quite expensive in repositories with many
references though: in a real-world repository with around 2.2 million
refs, fetching a single commit by its ID takes around 44 seconds.
Dominating the loading time is decompression and parsing of the objects
which are referenced by commits. Given the fact that we only care about
commits (or tags which can be peeled to one) in this context, there is
thus an easy performance win by switching the parsing logic to make use
of the commit graph in case we have one available. Like this, we avoid
hitting the object database to parse these commits but instead only load
them from the commit-graph. This results in a significant performance
boost when executing git-fetch in said repository with 2.2 million refs:
Benchmark #1: HEAD~: git fetch $remote $commit
Time (mean ± σ): 44.168 s ± 0.341 s [User: 42.985 s, System: 1.106 s]
Range (min … max): 43.565 s … 44.577 s 10 runs
Benchmark #2: HEAD: git fetch $remote $commit
Time (mean ± σ): 19.498 s ± 0.724 s [User: 18.751 s, System: 0.690 s]
Range (min … max): 18.629 s … 20.454 s 10 runs
Summary
'HEAD: git fetch $remote $commit' ran
2.27 ± 0.09 times faster than 'HEAD~: git fetch $remote $commit'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When I was fixing fuzzies as I updating po/id.po for 2.33.0 l10n round,
I noticed a triple-dash typo (--pickaxe-all) at diff.c, which according
to git-diff(1) manpage, the correct option name should be --pickaxe-all.
Fix the typo.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify code maintenance by removing the ability to toggle between
usage of memory pools and direct allocations. This allows us to also
remove paths_to_free since it was solely about bookkeeping to make sure
we freed the necessary paths, and allows us to remove some auxiliary
functions.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing a rebase, rmdir() is called on the folder .git/logs. On
Unix rmdir() exits without deleting anything in case .git/logs is a
symbolic link but the equivalent functions on Windows (_rmdir, _wrmdir
and RemoveDirectoryW) do not behave the same and remove the folder if it
is symlinked even if it is not empty.
This creates issues when folders in .git/ are symlinks which is
especially the case when git-repo[1] is used: It replaces `.git/logs/`
with a symlink.
One such issue is that the _target_ of that symlink is removed e.g.
during a `git rebase`, where `delete_reflog("REBASE_HEAD")` will not
only try to remove `.git/logs/REBASE_HEAD` but then recursively try to
remove the parent directories until an error occurs, a technique that
obviously relies on `rmdir()` refusing to remove a symlink.
This was reported in https://github.com/git-for-windows/git/issues/2967.
This commit updates mingw_rmdir() so that its behavior is the same as
Linux rmdir() in case of symbolic links.
To verify that Git does not regress on the reported issue, this patch
adds a regression test for the `git rebase` symptom, even if the same
`rmdir()` behavior is quite likely to cause potential problems in other
Git commands as well.
[1]: git-repo is a python tool built on top of Git which helps manage
many Git repositories. It stores all the .git/ folders in a central
place by taking advantage of symbolic links.
More information: https://gerrit.googlesource.com/git-repo/
Signed-off-by: Thomas Bétous <tomspycell@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
24c30e0b6 (wt-status: tolerate dangling marks, 2020-09-01) adds a test
that uses a BRE which breaks at least with OpenBSD's grep.
switch to an ERE as it is done for similar checks and while at it, remove
the now obsolete test_i18ngrep call.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the preceding commits we introduced new documentation that talks
about "[commit|object] prerequsite(s)", but also faithfully moved
around existing documentation that talks about the "basis".
Let's change both that moved-around documentation and other existing
documentation in the file to consistently use "[commit|object]"
prerequisite(s)" instead of talking about "basis". The mention of
"basis" isn't wrong, but readers will be helped by us using only one
term throughout the document for this concept.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite the "DESCRIPTION" section for "git bundle" to start by talking
about what bundles are in general terms, rather than diving directly
into one example of what they might be used for.
This changes documentation that's been substantially the same ever
since the command was added in 2e0afafebd (Add git-bundle: move
objects and references by archive, 2007-02-22).
I've split up the DESCRIPTION into that section and a "BUNDLE FORMAT"
section, it briefly discusses the format, but then links to the
technical/bundle-format.txt documentation.
The "the user must specify a basis" part of this is discussed below in
"SPECIFYING REFERENCES", and will be further elaborated on in a
subsequent commit. So I'm removing that part and letting the mention
of "revision exclusions" suffice.
There was a discussion about whether to say anything at all about
"thin packs" here[1]. I think it's good to mention it for the curious
reader willing to read the technical docs, but let's explicitly say
that there's no "thick pack", and that the difference shouldn't
matter.
1. http://lore.kernel.org/git/xmqqk0mbt5rj.fsf@gitster.g
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elaborate on the restriction that you cannot provide a revision that
doesn't resolve to a reference in the "SPECIFYING REFERENCES" section
with examples.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split out the discussion bout "object prerequisites" into its own
section, and add some more examples of the common cases.
See 2e0afafebd (Add git-bundle: move objects and references by
archive, 2007-02-22) for the introduction of the documentation being
changed here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A race between repacking and using pack bitmaps has been corrected.
* jk/check-pack-valid-before-opening-bitmap:
pack-bitmap: check pack validity when opening bitmap
"git read-tree" had a codepath where blobs are fetched one-by-one
from the promisor remote, which has been corrected to fetch in bulk.
* jt/bulk-prefetch:
cache-tree: prefetch in partial clone read-tree
unpack-trees: refactor prefetching code
CI update.
* js/ci-check-whitespace-updates:
ci(check-whitespace): restrict to the intended commits
ci(check-whitespace): stop requiring a read/write token
Documentation around GIT_CONFIG has been updated.
* jk/config-env-doc:
doc/git-config: simplify "override" advice for FILES section
doc/git-config: clarify GIT_CONFIG environment variable
doc/git-config: explain --file instead of referring to GIT_CONFIG
By doing ls -1 .git/{reftable,refs/heads}, we can capture changes to both
reftable and packed/loose ref storage.
This relies on the fact that git-pack-refs (which we're looking for here)
changes the number (loose/packed storage) and/or names (reftable) files used for
ref storage.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous code tested this by writing $ZERO_OID explicitly in the packed-refs
file. This is a type of corruption that doesn't reflect realistic use-cases. In
addition, even the ref-store test-tool refuses to write invalid OIDs.
(update-ref interprets $ZERO_OID is deleting the ref).
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test takes a lock on the target of a symref, and then verifies that it is
possible to expire the symref's reflog. In reftable, one can only take a global
lock (which would prevent the symref reflog from being expired altogether.)
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests verifies that "pack-refs" causes loose refs to be packed. As both
loose and packed refs are concepts specific to the files backend, mark the test
as REFFILES.
Check the outcome of the pack-refs operation. This was apparently forgotten in
the commit introducing this test: 16feb99d (Mar 26 2017, "t1405: some basic
tests on main ref store").
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the conditional use of CURLAUTH_DIGEST_IE and
CURLOPT_USE_SSL. These two have been split from earlier simpler checks
against LIBCURL_VERSION_NUM for ease of review.
According to
https://github.com/curl/curl/blob/master/docs/libcurl/symbols-in-versions
the CURLAUTH_DIGEST_IE flag became available in 7.19.3, and
CURLOPT_USE_SSL in 7.17.0.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cf2dc1c238 (speed up alt_odb_usable() with many alternates, 2021-07-07)
introduced the function fspathhash() for calculating path hashes while
respecting the configuration option core.ignorecase. Call it instead of
open-coding it; the resulting code is shorter and less repetitive.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the last commit we dropped support for curl < 7.16.0, let's
continue that and drop support for versions older than 7.19.3. This
allows us to simplify the code by getting rid of some "#ifdef"'s.
Git was broken with vanilla curl < 7.19.4 from v2.12.0 until
v2.15.0. Compiling with it was broken by using CURLPROTO_* outside any
"#ifdef" in aeae4db174 (http: create function to get curl allowed
protocols, 2016-12-14), and fixed in v2.15.0 in f18777ba6e (http: fix
handling of missing CURLPROTO_*, 2017-08-11).
It's unclear how much anyone was impacted by that in practice, since
as noted in [1] RHEL versions using curl older than that still
compiled, because RedHat backported some features. Perhaps other
vendors did the same.
Still, it's one datapoint indicating that it wasn't in active use at
the time. That (the v2.12.0 release) was in Feb 24, 2017, with v2.15.0
on Oct 30, 2017, it's now mid-2021.
1. http://lore.kernel.org/git/c8a2716d-76ac-735c-57f9-175ca3acbcb0@jupiterrise.com;
followed-up by f18777ba6e (http: fix handling of missing CURLPROTO_*,
2017-08-11)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With a54e938e5b (strbuf: support long paths w/o read rights in
strbuf_getcwd() on FreeBSD, 2017-03-26) we had t0001 break on systems
like OpenBSD and AIX whose getcwd(3) has standard (but not like glibc
et al) behavior.
This was partially fixed in bed67874e2 (t0001: skip test with
restrictive permissions if getpwd(3) respects them, 2017-08-07).
The problem with that fix is that while its analysis of the problem is
correct, it doesn't actually call getcwd(3), instead it invokes "pwd
-P". There is no guarantee that "pwd -P" is going to call getcwd(3),
as opposed to e.g. being a shell built-in.
On AIX under both bash and ksh this test breaks because "pwd -P" will
happily display the current working directory, but getcwd(3) called by
the "git init" we're testing here will fail to get it.
I checked whether clobbering the $PWD environment variable would
affect it, and it didn't. Presumably these shells keep track of their
working directory internally.
There's possible follow-up work here in teaching strbuf_getcwd() to
get the working directory with whatever method "pwd" uses on these
platforms. See [1] for a discussion of that, but let's take the easy
way out here and just skip these tests by fixing the
GETCWD_IGNORES_PERMS prerequisite to match the limitations of
strbuf_getcwd().
1. https://lore.kernel.org/git/b650bef5-d739-d98d-e9f1-fa292b6ce982@web.de/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the last commit we dropped support for curl < 7.11.1, let's
continue that and drop support for versions older than 7.16.0. This
allows us to get rid of some now-obsolete #ifdefs.
Choosing 7.16.0 is a somewhat arbitrary cutoff:
1. It came out in October of 2006, almost 15 years ago.
Besides being a nice round number, around 10 years is
a common end-of-life support period, even for conservative
distributions.
2. That version introduced the curl_multi interface, which
gives us a lot of bang for the buck in removing #ifdefs
RHEL 5 came with curl 7.15.5[1] (released in August 2006). RHEL 5's
extended life cycle program ended on 2020-11-30[1]. RHEL 6 comes with
curl 7.19.7 (released in November 2009), and RHEL 7 comes with
7.29.0 (released in February 2013).
1. http://lore.kernel.org/git/873e1f31-2a96-5b72-2f20-a5816cad1b51@jupiterrise.com
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop support for this ancient version of curl and simplify the code by
allowing us get rid of some "#ifdef"'s.
Git will not build with vanilla curl older than 7.11.1 due our use of
CURLOPT_POSTFIELDSIZE in 37ee680d9b
(http.postbuffer: allow full range of ssize_t values,
2017-04-11). This field was introduced in curl 7.11.1.
We could solve these compilation problems with more #ifdefs,
but it's not worth the trouble. Version 7.11.1 came out in
March of 2004, over 17 years ago. Let's declare that too old
and drop any existing ifdefs that go further back. One
obvious benefit is that we'll have fewer conditional bits
cluttering the code.
This patch drops all #ifdefs that reference older versions
(note that curl's preprocessor macros are in hex, so we're
looking for 070b01, not 071101).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Three hyphens are rendered verbatim, so "--" has to be used to produce a
dash. There is no double arrow ("<->" is rendered as "<→"), so a left
and right arrow "<-->" have to be combined for that.
So fix asciidoc output for special characters. This is similar to fixes
in commit de82095a95 (doc hash-function-transition: fix asciidoc output,
2021-02-05).
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pool_alloc_filespec() was written so that the code when pool != NULL
mimicked the code from alloc_filespec(), which including allocating
enough extra space for the path and then copying it. However, the path
passed to pool_alloc_filespec() is always going to already be in the
same memory pool, so we may as well reuse it instead of copying it.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 198.5 ms ± 3.4 ms 198.3 ms ± 2.9 ms
mega-renames: 679.1 ms ± 5.6 ms 661.8 ms ± 5.9 ms
just-one-mega: 271.9 ms ± 2.8 ms 264.6 ms ± 2.5 ms
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 198.1 ms ± 2.6 ms 198.5 ms ± 3.4 ms
mega-renames: 715.8 ms ± 4.0 ms 679.1 ms ± 5.6 ms
just-one-mega: 276.8 ms ± 4.2 ms 271.9 ms ± 2.8 ms
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to be able to allocate filespecs and filepairs using a mem_pool.
However, filespec data will still remain outside the pool (perhaps in
the future we could plumb the pool through the various diff APIs to
allocate the filespec data too, but for now we are limiting the scope).
Add some extra functions to allocate these appropriately based on the
non-NULL-ness of opt->priv->pool, as well as some extra functions to
handle correctly deallocating the relevant parts of them. A future
commit will make use of these new functions.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For all the strmaps (including strintmaps and strsets) whose memory is
unconditionally freed as part of clear_or_reinit_internal_opts(), switch
them over to using our new memory pool.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 202.5 ms ± 3.2 ms 198.1 ms ± 2.6 ms
mega-renames: 1.072 s ± 0.012 s 715.8 ms ± 4.0 ms
just-one-mega: 357.3 ms ± 3.9 ms 276.8 ms ± 4.2 ms
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-ort has a lot of data structures, and they all tend to be freed
together in clear_or_reinit_internal_opts(). Set up a memory pool to
allow us to make these allocations and deallocations faster. Future
commits will adjust various callers to make use of this memory pool.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the code more flexible so that it can handle both being run with or
without a memory pool by adding utility functions which will either call
xmalloc, xcalloc, xstrndup
or
mem_pool_alloc, mem_pool_calloc, mem_pool_strndup
depending on whether we have a non-NULL memory pool. A subsequent
commit will make use of these.
(We will actually be dropping these functions soon and just assuming we
always have a memory pool, but the flexibility was very useful during
development of merge-ort so I want to be able to restore it if needed.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exact rename detection, via insert_file_table(), uses a hashmap to store
files by oid. Use a mem_pool for the hashmap entries so these can all be
allocated and deallocated together.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 204.2 ms ± 3.0 ms 202.5 ms ± 3.2 ms
mega-renames: 1.076 s ± 0.015 s 1.072 s ± 0.012 s
just-one-mega: 364.1 ms ± 7.0 ms 357.3 ms ± 3.9 ms
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to make it clearer that these three variables holding a
function refer to functions that will clear the strmap/strintmap/strset,
rename them to str{map,intmap,set}_clear_func().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --renormalize option updates the EOL conversions for the tracked
files. However, the loop already ignores files marked with the
SKIP_WORKTREE bit, so it will continue to do so with a sparse index
because the sparse directory entries also have this bit set.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b243012 (refresh_index(): add flag to ignore SKIP_WORKTREE
entries, 2021-04-08), 'git add --refresh <path>' will output a warning
message when the path is outside the sparse-checkout definition. The
implementation of this warning happened in parallel with the
sparse-index work to add ensure_full_index() calls throughout the
codebase.
Update this loop to have the proper logic that checks to see if the
pathspec is outside the sparse-checkout definition. This avoids the need
to expand the sparse directory entry and determine if the path is
tracked, untracked, or ignored. We simply avoid updating the stat()
information because there isn't even an entry that matches the path!
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The add_pathspec_matches_against_index() focuses on matching a pathspec
to file entries in the index. This already works correctly for its only
use: checking if untracked files exist in the index.
The compatibility checks in t1092 already test that 'git add <dir>'
works for a directory outside of the sparse cone. That provides coverage
for removing this guard.
This finalizes our ability to run 'git add .' without expanding a sparse
index to a full one. This is evidenced by an update to t1092 and by
these performance numbers for p2000-sparse-operations.sh:
Test HEAD~1 HEAD
--------------------------------------------------------------------------------
2000.10: git add . (full-index-v3) 0.37(0.28+0.07) 0.36(0.27+0.06) -2.7%
2000.11: git add . (full-index-v4) 0.33(0.26+0.06) 0.32(0.28+0.05) -3.0%
2000.12: git add . (sparse-index-v3) 0.57(0.53+0.07) 0.06(0.06+0.07) -89.5%
2000.13: git add . (sparse-index-v4) 0.57(0.53+0.07) 0.05(0.03+0.09) -91.2%
While the ~90% improvement is shown by the test results, it is worth
noting that expanding the sparse index was adding overhead in previous
commits. Comparing to the full index case, we see the performance go
from 0.33s to 0.05s, an 85% improvement.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Disable command_requires_full_index for 'git add'. This does not require
any additional removals of ensure_full_index(). The main reason is that
'git add' discovers changes based on the pathspec and the worktree
itself. These are then inserted into the index directly, and calls to
index_name_pos() or index_file_exists() already call expand_to_path() at
the appropriate time to support a sparse-index.
Add a test to check that 'git add -A' and 'git add <file>' does not
expand the index at all, as long as <file> is not within a sparse
directory. This does not help the global 'git add .' case.
We can measure the improvement using p2000-sparse-operations.sh with
these results:
Test HEAD~1 HEAD
------------------------------------------------------------------------------
2000.6: git add -A (full-index-v3) 0.35(0.30+0.05) 0.37(0.29+0.06) +5.7%
2000.7: git add -A (full-index-v4) 0.31(0.26+0.06) 0.33(0.27+0.06) +6.5%
2000.8: git add -A (sparse-index-v3) 0.57(0.53+0.07) 0.05(0.04+0.08) -91.2%
2000.9: git add -A (sparse-index-v4) 0.58(0.55+0.06) 0.05(0.05+0.06) -91.4%
While the 91% improvement seems impressive, it's important to recognize
that previously we had significant overhead for expanding the
sparse-index. Comparing to the full index case, 'git add -A' goes from
0.37s to 0.05s, which is "only" an 86% improvement.
This modification to 'git add' creates some behavior change depending on
the use of a sparse index. We modify a test in t1092 to demonstrate
these changes which will be remedied in future changes.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conflicts can occur outside of the sparse-checkout definition, and in
that case users might try to resolve the conflicts in several ways.
Document a few of these ways in a test. Make it clear that this behavior
is not necessarily the optimal flow, since users can become confused
when Git deletes these files from the worktree in later commands.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"TEST_OUTPUT_DIRECTORY=there make test" failed to work, which has
been corrected.
* ps/t0000-output-directory-fix:
t0000: fix test if run with TEST_OUTPUT_DIRECTORY
The code that gives an error message in "git multi-pack-index" when
no subcommand is given tried to print a NULL pointer as a strong,
which has been corrected.
* tb/reverse-midx:
multi-pack-index: fix potential segfault without sub-command
The completion support used to offer alternate spelling of options
that exist only for compatibility, which has been corrected.
* pb/dont-complete-aliased-options:
parse-options: don't complete option aliases by default
Documentation on "git diff -l<n>" and diff.renameLimit have been
updated, and the defaults for these limits have been raised.
* en/rename-limits-doc:
rename: bump limit defaults yet again
diffcore-rename: treat a rename_limit of 0 as unlimited
doc: clarify documentation for rename/copy limits
diff: correct warning message when renameLimit exceeded
A guideline for gender neutral documentation has been added.
* ds/gender-neutral-doc-guidelines:
CodingGuidelines: recommend gender-neutral description
"git status" codepath learned to work with sparsely populated index
without hydrating it fully.
* ds/status-with-sparse-index:
t1092: document bad sparse-checkout behavior
fsmonitor: integrate with sparse index
wt-status: expand added sparse directory entries
status: use sparse-index throughout
status: skip sparse-checkout percentage with sparse-index
diff-lib: handle index diffs with sparse dirs
dir.c: accept a directory as part of cone-mode patterns
unpack-trees: unpack sparse directory entries
unpack-trees: rename unpack_nondirectories()
unpack-trees: compare sparse directories correctly
unpack-trees: preserve cache_bottom
t1092: add tests for status/add and sparse files
t1092: expand repository data shape
t1092: replace incorrect 'echo' with 'cat'
sparse-index: include EXTENDED flag when expanding
sparse-index: skip indexes with unmerged entries
The CI gained a new job to run "make sparse" check.
* js/ci-make-sparse:
ci/install-dependencies: handle "sparse" job package installs
ci: run "apt-get update" before "apt-get install"
ci: run `make sparse` as part of the GitHub workflow
Tests that cover protocol bits have been updated and helpers
used there have been consolidated.
* ab/pkt-line-tests:
test-lib-functions: use test-tool for [de]packetize()
Many "printf"-like helper functions we have have been annotated
with __attribute__() to catch placeholder/parameter mismatches.
* ab/attribute-format:
advice.h: add missing __attribute__((format)) & fix usage
*.h: add a few missing __attribute__((format))
*.c static functions: add missing __attribute__((format))
sequencer.c: move static function to avoid forward decl
*.c static functions: don't forward-declare __attribute__
Optimize "git log" for cases where we wasted cycles to load ref
decoration data that may not be needed.
* jk/log-decorate-optim:
load_ref_decorations(): fix decoration with tags
add_ref_decoration(): rename s/type/deco_type/
load_ref_decorations(): avoid parsing non-tag objects
object.h: add lookup_object_by_type() function
object.h: expand docstring for lookup_unknown_object()
log: avoid loading decorations for userformats that don't need it
pretty.h: update and expand docstring for userformat_find_requirements()
"git worktree add --lock" learned to record why the worktree is
locked with a custom message.
* sm/worktree-add-lock:
worktree: teach `add` to accept --reason <string> with --lock
worktree: mark lock strings with `_()` for translation
t2400: clean up '"add" worktree with lock' test
Optimization for repositories with many alternate object store.
* ew/many-alternate-optim:
oidtree: a crit-bit tree for odb_loose_cache
oidcpy_with_padding: constify `src' arg
make object_directory.loose_objects_subdir_seen a bitmap
avoid strlen via strbuf_addstr in link_alt_odb_entry
speed up alt_odb_usable() with many alternates
"git commit --allow-empty-message" won't abort the operation upon
an empty message, but the hint shown in the editor said otherwise.
* hj/commit-allow-empty-message:
commit: remove irrelavent prompt on `--allow-empty-message`
commit: reorganise commit hint strings
The function was designed to return only BISECT_OK (0) or
BISECT_FAILED (-1) and no other values, but there were two issues:
- The comment misspelled BISECT_FAILED as BISECT_FAILURE, even
though the logic it described (i.e. any non-zero return should be
reported as a single BISECT_FAILED) was correct.
- It took the return value from run_command_v_opt(), and assumed it
was either -1 or 1 upon error, which is not the case; it can relay
errors from wait_or_whine(), which can report exit status of the
child process.
Translate any error return from run_command_v_opt() to BISECT_FAILED,
and simplify the resulting code by losing the 'res' variable that is
no longer needed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In scripted versions of "git bisect", we used "git show-branch" to
describe a single commit in the bisect log and also to the interactive
user after checking out the next version to be tested.
The former use of "git show-branch" was lost when the helper
function that wrote bisect log entries was rewritten at 0f30233a
(bisect--helper: `bisect_write` shell function in C, 2019-01-02) in
C
But we've kept the latter ever since 0871984d (bisect: make "git
bisect" use new "--next-all" bisect-helper function, 2009-05-09)
started using the faithful C-rewrite introduced at ef24c7ca
(bisect--helper: add "--next-exit" to output bisect results,
2009-04-19).
Showing "[<full hex>] <subject>" is simple enough with our helper
pretty.c::format_commit_message() and spawning show-branch is an
overkill. Let's lose one external process.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This just matches the style/location of the package installation for
other jobs. There should be no functional change.
I did flip the order of the options and command-name ("-y update"
instead of "update -y") for consistency with other lines in the same
file.
Note also that we have to reorder the dependency install with the
"checkout" action, so that we actually have the "ci" scripts available.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "sparse" workflow runs "apt-get install" to pick up a few necessary
packages. But it needs to run "apt-get update" first, or it risks trying
to download an old package version that no longer exists. And in fact
this happens now, with output like:
2021-07-26T17:40:51.2551880Z E: Failed to fetch http://security.ubuntu.com/ubuntu/pool/main/c/curl/libcurl4-openssl-dev_7.68.0-1ubuntu2.5_amd64.deb 404 Not Found [IP: 52.147.219.192 80]
2021-07-26T17:40:51.2554304Z E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
Our other ci jobs don't suffer from this; they rely on scripts in ci/,
and ci/install-dependencies does the appropriate "apt-get update".
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup_unpack_trees_porcelain() populates various fields on
unpack_tree_opts, we need to call clear_unpack_trees_porcelain() to
avoid leaking them. Specifically, we used to leak
unpack_tree_opts.msgs_to_free.
We have to do this in leave_reset_head because there are multiple
scenarios where unpack_tree_opts has already been configured, followed
by a 'goto leave_reset_head'. But we can also 'goto leave_reset_head'
prior to having initialised unpack_tree_opts via memset(..., 0, ...).
Therefore we also move unpack_tree_opts initialisation to the start of
reset_head(), and convert it to use brace initialisation - which
guarantees that we can never clear an uninitialised unpack_tree_opts.
clear_unpack_tree_opts() is always safe to call as long as
unpack_tree_opts is at least zero-initialised, i.e. it does not depend
on a previous call to setup_unpack_trees_porcelain().
LSAN output from t0021:
Direct leak of 192 byte(s) in 1 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa721e5 in xrealloc wrapper.c:126:8
#2 0x9f7861 in strvec_push_nodup strvec.c:19:2
#3 0x9f7861 in strvec_pushf strvec.c:39:2
#4 0xa43e14 in setup_unpack_trees_porcelain unpack-trees.c:129:3
#5 0x97e011 in reset_head reset.c:53:2
#6 0x61dfa5 in cmd_rebase builtin/rebase.c:1991:9
#7 0x4ce83e in run_builtin git.c:475:11
#8 0x4ccafe in handle_builtin git.c:729:3
#9 0x4cb01c in run_argv git.c:818:4
#10 0x4cb01c in cmd_main git.c:949:19
#11 0x6b3f3d in main common-main.c:52:11
#12 0x7fa8addf3349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 147 byte(s) in 1 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa721e5 in xrealloc wrapper.c:126:8
#2 0x9e8d54 in strbuf_grow strbuf.c:98:2
#3 0x9e8d54 in strbuf_vaddf strbuf.c:401:3
#4 0x9f7774 in strvec_pushf strvec.c:36:2
#5 0xa43e14 in setup_unpack_trees_porcelain unpack-trees.c:129:3
#6 0x97e011 in reset_head reset.c:53:2
#7 0x61dfa5 in cmd_rebase builtin/rebase.c:1991:9
#8 0x4ce83e in run_builtin git.c:475:11
#9 0x4ccafe in handle_builtin git.c:729:3
#10 0x4cb01c in run_argv git.c:818:4
#11 0x4cb01c in cmd_main git.c:949:19
#12 0x6b3f3d in main common-main.c:52:11
#13 0x7fa8addf3349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 134 byte(s) in 1 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa721e5 in xrealloc wrapper.c:126:8
#2 0x9e8d54 in strbuf_grow strbuf.c:98:2
#3 0x9e8d54 in strbuf_vaddf strbuf.c:401:3
#4 0x9f7774 in strvec_pushf strvec.c:36:2
#5 0xa43fe4 in setup_unpack_trees_porcelain unpack-trees.c:168:3
#6 0x97e011 in reset_head reset.c:53:2
#7 0x61dfa5 in cmd_rebase builtin/rebase.c:1991:9
#8 0x4ce83e in run_builtin git.c:475:11
#9 0x4ccafe in handle_builtin git.c:729:3
#10 0x4cb01c in run_argv git.c:818:4
#11 0x4cb01c in cmd_main git.c:949:19
#12 0x6b3f3d in main common-main.c:52:11
#13 0x7fa8addf3349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 130 byte(s) in 1 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa721e5 in xrealloc wrapper.c:126:8
#2 0x9e8d54 in strbuf_grow strbuf.c:98:2
#3 0x9e8d54 in strbuf_vaddf strbuf.c:401:3
#4 0x9f7774 in strvec_pushf strvec.c:36:2
#5 0xa43f20 in setup_unpack_trees_porcelain unpack-trees.c:150:3
#6 0x97e011 in reset_head reset.c:53:2
#7 0x61dfa5 in cmd_rebase builtin/rebase.c:1991:9
#8 0x4ce83e in run_builtin git.c:475:11
#9 0x4ccafe in handle_builtin git.c:729:3
#10 0x4cb01c in run_argv git.c:818:4
#11 0x4cb01c in cmd_main git.c:949:19
#12 0x6b3f3d in main common-main.c:52:11
#13 0x7fa8addf3349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 603 byte(s) leaked in 4 allocation(s).
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- cmd_rebase populates rebase_options.strategy with newly allocated
strings, hence we need to free those strings at the end of cmd_rebase
to avoid a leak.
- In some cases: get_replay_opts() is called, which prepares replay_opts
using data from rebase_options. We used to simply copy the pointer
from rebase_options.strategy, however that would now result in a
double-free because sequencer_remove_state() is eventually used to
free replay_opts.strategy. To avoid this we xstrdup() strategy when
adding it to replay_opts.
The original leak happens because we always populate
rebase_options.strategy, but we don't always enter the path that calls
get_replay_opts() and later sequencer_remove_state() - in other words
we'd always allocate a new string into rebase_options.strategy but
only sometimes did we free it. We now make sure that rebase_options
and replay_opts both own their own copies of strategy, and each copy
is free'd independently.
This was first seen when running t0021 with LSAN, but t2012 helped catch
the fact that we can't just free(options.strategy) at the end of
cmd_rebase (as that can cause a double-free). LSAN output from t0021:
LSAN output from t0021:
Direct leak of 4 byte(s) in 1 object(s) allocated from:
#0 0x486804 in strdup ../projects/compiler-rt/lib/asan/asan_interceptors.cpp:452:3
#1 0xa71eb8 in xstrdup wrapper.c:29:14
#2 0x61b1cc in cmd_rebase builtin/rebase.c:1779:22
#3 0x4ce83e in run_builtin git.c:475:11
#4 0x4ccafe in handle_builtin git.c:729:3
#5 0x4cb01c in run_argv git.c:818:4
#6 0x4cb01c in cmd_main git.c:949:19
#7 0x6b3fad in main common-main.c:52:11
#8 0x7f267b512349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 4 byte(s) leaked in 1 allocation(s).
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge_name() calls dwim_ref(), which allocates a new string into
found_ref. Therefore add a free() to avoid leaking found_ref.
LSAN output from t0021:
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x486804 in strdup ../projects/compiler-rt/lib/asan/asan_interceptors.cpp:452:3
#1 0xa8beb8 in xstrdup wrapper.c:29:14
#2 0x954054 in expand_ref refs.c:671:12
#3 0x953cb6 in repo_dwim_ref refs.c:644:22
#4 0x5d3759 in dwim_ref refs.h:162:9
#5 0x5d3759 in merge_name builtin/merge.c:517:6
#6 0x5d3759 in collect_parents builtin/merge.c:1214:5
#7 0x5cf60d in cmd_merge builtin/merge.c:1458:16
#8 0x4ce83e in run_builtin git.c:475:11
#9 0x4ccafe in handle_builtin git.c:729:3
#10 0x4cb01c in run_argv git.c:818:4
#11 0x4cb01c in cmd_main git.c:949:19
#12 0x6bdbfd in main common-main.c:52:11
#13 0x7f0430502349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 16 byte(s) leaked in 1 allocation(s).
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These leaks all happen at the end of cmd_mv, hence don't matter in any
way. But we still fix the easy ones and squash the rest to get us closer
to being able to run tests without leaks.
LSAN output from t0050:
Direct leak of 384 byte(s) in 1 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa8c015 in xrealloc wrapper.c:126:8
#2 0xa0a7e1 in add_entry string-list.c:44:2
#3 0xa0a7e1 in string_list_insert string-list.c:58:14
#4 0x5dac03 in cmd_mv builtin/mv.c:248:4
#5 0x4ce83e in run_builtin git.c:475:11
#6 0x4ccafe in handle_builtin git.c:729:3
#7 0x4cb01c in run_argv git.c:818:4
#8 0x4cb01c in cmd_main git.c:949:19
#9 0x6bd9ad in main common-main.c:52:11
#10 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x49a82d in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0xa8bd09 in do_xmalloc wrapper.c:41:8
#2 0x5dbc34 in internal_prefix_pathspec builtin/mv.c:32:2
#3 0x5da575 in cmd_mv builtin/mv.c:158:14
#4 0x4ce83e in run_builtin git.c:475:11
#5 0x4ccafe in handle_builtin git.c:729:3
#6 0x4cb01c in run_argv git.c:818:4
#7 0x4cb01c in cmd_main git.c:949:19
#8 0x6bd9ad in main common-main.c:52:11
#9 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x49a82d in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0xa8bd09 in do_xmalloc wrapper.c:41:8
#2 0x5dbc34 in internal_prefix_pathspec builtin/mv.c:32:2
#3 0x5da4e4 in cmd_mv builtin/mv.c:148:11
#4 0x4ce83e in run_builtin git.c:475:11
#5 0x4ccafe in handle_builtin git.c:729:3
#6 0x4cb01c in run_argv git.c:818:4
#7 0x4cb01c in cmd_main git.c:949:19
#8 0x6bd9ad in main common-main.c:52:11
#9 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x49a9a2 in calloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0xa8c119 in xcalloc wrapper.c:140:8
#2 0x5da585 in cmd_mv builtin/mv.c:159:22
#3 0x4ce83e in run_builtin git.c:475:11
#4 0x4ccafe in handle_builtin git.c:729:3
#5 0x4cb01c in run_argv git.c:818:4
#6 0x4cb01c in cmd_main git.c:949:19
#7 0x6bd9ad in main common-main.c:52:11
#8 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 4 byte(s) in 1 object(s) allocated from:
#0 0x49a9a2 in calloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0xa8c119 in xcalloc wrapper.c:140:8
#2 0x5da4f8 in cmd_mv builtin/mv.c:149:10
#3 0x4ce83e in run_builtin git.c:475:11
#4 0x4ccafe in handle_builtin git.c:729:3
#5 0x4cb01c in run_argv git.c:818:4
#6 0x4cb01c in cmd_main git.c:949:19
#7 0x6bd9ad in main common-main.c:52:11
#8 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 65 byte(s) in 1 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa8c015 in xrealloc wrapper.c:126:8
#2 0xa00226 in strbuf_grow strbuf.c:98:2
#3 0xa00226 in strbuf_vaddf strbuf.c:394:3
#4 0xa065c7 in xstrvfmt strbuf.c:981:2
#5 0xa065c7 in xstrfmt strbuf.c:991:8
#6 0x9e7ce7 in prefix_path_gently setup.c:115:15
#7 0x9e7fa6 in prefix_path setup.c:128:12
#8 0x5dbdbf in internal_prefix_pathspec builtin/mv.c:55:23
#9 0x5da575 in cmd_mv builtin/mv.c:158:14
#10 0x4ce83e in run_builtin git.c:475:11
#11 0x4ccafe in handle_builtin git.c:729:3
#12 0x4cb01c in run_argv git.c:818:4
#13 0x4cb01c in cmd_main git.c:949:19
#14 0x6bd9ad in main common-main.c:52:11
#15 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 65 byte(s) in 1 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa8c015 in xrealloc wrapper.c:126:8
#2 0xa00226 in strbuf_grow strbuf.c:98:2
#3 0xa00226 in strbuf_vaddf strbuf.c:394:3
#4 0xa065c7 in xstrvfmt strbuf.c:981:2
#5 0xa065c7 in xstrfmt strbuf.c:991:8
#6 0x9e7ce7 in prefix_path_gently setup.c:115:15
#7 0x9e7fa6 in prefix_path setup.c:128:12
#8 0x5dbdbf in internal_prefix_pathspec builtin/mv.c:55:23
#9 0x5da4e4 in cmd_mv builtin/mv.c:148:11
#10 0x4ce83e in run_builtin git.c:475:11
#11 0x4ccafe in handle_builtin git.c:729:3
#12 0x4cb01c in run_argv git.c:818:4
#13 0x4cb01c in cmd_main git.c:949:19
#14 0x6bd9ad in main common-main.c:52:11
#15 0x7fbfeffc4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 558 byte(s) leaked in 7 allocation(s).
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
apply_multi_file_filter and async_query_available_blobs both query
subprocess output using subprocess_read_status, which writes data into
the identically named filter_status strbuf. We add a strbuf_release to
avoid leaking their contents.
Leak output seen when running t0021 with LSAN:
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa8c2b5 in xrealloc wrapper.c:126:8
#2 0x9ff99d in strbuf_grow strbuf.c:98:2
#3 0x9ff99d in strbuf_addbuf strbuf.c:304:2
#4 0xa101d6 in subprocess_read_status sub-process.c:45:5
#5 0x77793c in apply_multi_file_filter convert.c:886:8
#6 0x77793c in apply_filter convert.c:1042:10
#7 0x77a0b5 in convert_to_git_filter_fd convert.c:1492:7
#8 0x8b48cd in index_stream_convert_blob object-file.c:2156:2
#9 0x8b48cd in index_fd object-file.c:2248:9
#10 0x597411 in hash_fd builtin/hash-object.c:43:9
#11 0x596be1 in hash_object builtin/hash-object.c:59:2
#12 0x596be1 in cmd_hash_object builtin/hash-object.c:153:3
#13 0x4ce83e in run_builtin git.c:475:11
#14 0x4ccafe in handle_builtin git.c:729:3
#15 0x4cb01c in run_argv git.c:818:4
#16 0x4cb01c in cmd_main git.c:949:19
#17 0x6bdc2d in main common-main.c:52:11
#18 0x7f42acf79349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 24 byte(s) leaked in 1 allocation(s).
Direct leak of 120 byte(s) in 5 object(s) allocated from:
#0 0x49ab49 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0xa8c295 in xrealloc wrapper.c:126:8
#2 0x9ff97d in strbuf_grow strbuf.c:98:2
#3 0x9ff97d in strbuf_addbuf strbuf.c:304:2
#4 0xa101b6 in subprocess_read_status sub-process.c:45:5
#5 0x775c73 in async_query_available_blobs convert.c:960:8
#6 0x80029d in finish_delayed_checkout entry.c:183:9
#7 0xa65d1e in check_updates unpack-trees.c:493:10
#8 0xa5f469 in unpack_trees unpack-trees.c:1747:8
#9 0x525971 in checkout builtin/clone.c:815:6
#10 0x525971 in cmd_clone builtin/clone.c:1409:8
#11 0x4ce83e in run_builtin git.c:475:11
#12 0x4ccafe in handle_builtin git.c:729:3
#13 0x4cb01c in run_argv git.c:818:4
#14 0x4cb01c in cmd_main git.c:949:19
#15 0x6bdc2d in main common-main.c:52:11
#16 0x7fa253fce349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 120 byte(s) leaked in 5 allocation(s).
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
repo_diff_setup() calls through to diff.c's static prep_parse_options(),
which in turn allocates a new array into diff_opts.parseopts.
diff_setup_done() is responsible for freeing that array, and has the
benefit of verifying diff_opts too - hence we add a call to
diff_setup_done() to avoid leaking parseopts.
Output from the leak as found while running t0090 with LSAN:
Direct leak of 7120 byte(s) in 1 object(s) allocated from:
#0 0x49a82d in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0xa8bf89 in do_xmalloc wrapper.c:41:8
#2 0x7a7bae in prep_parse_options diff.c:5636:2
#3 0x7a7bae in repo_diff_setup diff.c:4611:2
#4 0x93716c in repo_index_has_changes read-cache.c:2518:3
#5 0x872233 in unclean merge-ort-wrappers.c:12:14
#6 0x872233 in merge_ort_recursive merge-ort-wrappers.c:53:6
#7 0x5d5b11 in try_merge_strategy builtin/merge.c:752:12
#8 0x5d0b6b in cmd_merge builtin/merge.c:1666:9
#9 0x4ce83e in run_builtin git.c:475:11
#10 0x4ccafe in handle_builtin git.c:729:3
#11 0x4cb01c in run_argv git.c:818:4
#12 0x4cb01c in cmd_main git.c:949:19
#13 0x6bdc2d in main common-main.c:52:11
#14 0x7f551eb51349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 7120 byte(s) leaked in 1 allocation(s)
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
u.head is populated using resolve_refdup(), which returns a newly
allocated string - hence we also need to free() it.
Found while running t0041 with LSAN:
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x486804 in strdup ../projects/compiler-rt/lib/asan/asan_interceptors.cpp:452:3
#1 0xa8be98 in xstrdup wrapper.c:29:14
#2 0x9481db in head_atom_parser ref-filter.c:549:17
#3 0x9408c7 in parse_ref_filter_atom ref-filter.c:703:30
#4 0x9400e3 in verify_ref_format ref-filter.c:974:8
#5 0x4f9e8b in print_ref_list builtin/branch.c:439:6
#6 0x4f9e8b in cmd_branch builtin/branch.c:757:3
#7 0x4ce83e in run_builtin git.c:475:11
#8 0x4ccafe in handle_builtin git.c:729:3
#9 0x4cb01c in run_argv git.c:818:4
#10 0x4cb01c in cmd_main git.c:949:19
#11 0x6bdc2d in main common-main.c:52:11
#12 0x7f96edf86349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 16 byte(s) leaked in 1 allocation(s).
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
old_dir/new_dir are free()'d at the end of update_dir_rename_counts,
however if we return early we'll never free those strings. Therefore
we should move all new allocations after the possible early return,
avoiding a leak.
This seems like a fairly recent leak, that started happening since the
early-return was added in:
1ad69eb0dc (diffcore-rename: compute dir_rename_counts in stages, 2021-02-27)
LSAN output from t0022:
Direct leak of 7 byte(s) in 1 object(s) allocated from:
#0 0x486804 in strdup ../projects/compiler-rt/lib/asan/asan_interceptors.cpp:452:3
#1 0xa71e48 in xstrdup wrapper.c:29:14
#2 0x7db9c7 in update_dir_rename_counts diffcore-rename.c:464:12
#3 0x7db6ae in find_renames diffcore-rename.c:1062:3
#4 0x7d76c3 in diffcore_rename_extended diffcore-rename.c:1472:18
#5 0x7b4cfc in diffcore_std diff.c:6705:4
#6 0x855e46 in log_tree_diff_flush log-tree.c:846:2
#7 0x856574 in log_tree_diff log-tree.c:955:3
#8 0x856574 in log_tree_commit log-tree.c:986:10
#9 0x9a9c67 in print_commit_summary sequencer.c:1329:7
#10 0x52e623 in cmd_commit builtin/commit.c:1862:3
#11 0x4ce83e in run_builtin git.c:475:11
#12 0x4ccafe in handle_builtin git.c:729:3
#13 0x4cb01c in run_argv git.c:818:4
#14 0x4cb01c in cmd_main git.c:949:19
#15 0x6b3f3d in main common-main.c:52:11
#16 0x7fe397c7a349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Direct leak of 7 byte(s) in 1 object(s) allocated from:
#0 0x486804 in strdup ../projects/compiler-rt/lib/asan/asan_interceptors.cpp:452:3
#1 0xa71e48 in xstrdup wrapper.c:29:14
#2 0x7db9bc in update_dir_rename_counts diffcore-rename.c:463:12
#3 0x7db6ae in find_renames diffcore-rename.c:1062:3
#4 0x7d76c3 in diffcore_rename_extended diffcore-rename.c:1472:18
#5 0x7b4cfc in diffcore_std diff.c:6705:4
#6 0x855e46 in log_tree_diff_flush log-tree.c:846:2
#7 0x856574 in log_tree_diff log-tree.c:955:3
#8 0x856574 in log_tree_commit log-tree.c:986:10
#9 0x9a9c67 in print_commit_summary sequencer.c:1329:7
#10 0x52e623 in cmd_commit builtin/commit.c:1862:3
#11 0x4ce83e in run_builtin git.c:475:11
#12 0x4ccafe in handle_builtin git.c:729:3
#13 0x4cb01c in run_argv git.c:818:4
#14 0x4cb01c in cmd_main git.c:949:19
#15 0x6b3f3d in main common-main.c:52:11
#16 0x7fe397c7a349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 14 byte(s) leaked in 2 allocation(s).
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_for_each_repo() copies argv into args (a strvec), which is later
passed into run_command_on_repo(), which in turn copies that strvec onto
the end of child.args. The initial copy is unnecessary (we never modify
args). We therefore choose to just pass argv directly into
run_command_on_repo(), which lets us avoid the copy and fixes the leak.
LSAN output from t0068:
Direct leak of 192 byte(s) in 1 object(s) allocated from:
#0 0x7f63bd4ab8b0 in realloc (/usr/lib64/libasan.so.4+0xdc8b0)
#1 0x98d7e6 in xrealloc wrapper.c:126
#2 0x916914 in strvec_push_nodup strvec.c:19
#3 0x916a6e in strvec_push strvec.c:26
#4 0x4be4eb in cmd_for_each_repo builtin/for-each-repo.c:49
#5 0x410dcd in run_builtin git.c:475
#6 0x410dcd in handle_builtin git.c:729
#7 0x414087 in run_argv git.c:818
#8 0x414087 in cmd_main git.c:949
#9 0x40e9ec in main common-main.c:52
#10 0x7f63bc9fa349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Indirect leak of 22 byte(s) in 2 object(s) allocated from:
#0 0x7f63bd445e30 in __interceptor_strdup (/usr/lib64/libasan.so.4+0x76e30)
#1 0x98d698 in xstrdup wrapper.c:29
#2 0x916a63 in strvec_push strvec.c:26
#3 0x4be4eb in cmd_for_each_repo builtin/for-each-repo.c:49
#4 0x410dcd in run_builtin git.c:475
#5 0x410dcd in handle_builtin git.c:729
#6 0x414087 in run_argv git.c:818
#7 0x414087 in cmd_main git.c:949
#8 0x40e9ec in main common-main.c:52
#9 0x7f63bc9fa349 in __libc_start_main (/lib64/libc.so.6+0x24349)
See also discussion about the original implementation below - this code
appears to have evolved from a callback explaining the double-strvec-copy
pattern, but there's no strong reason to keep that now:
https://lore.kernel.org/git/68bbeca5-314b-08ee-ef36-040e3f3814e9@gmail.com/
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
relative_url() populates sb. In the normal return path, its buffer is
detached using strbuf_detach(). However the early return path does
nothing with sb, which means that sb's memory is leaked - therefore
we add a release to avoid this leak.
The reset is also only necessary for the normal return path, hence we
move it down to after the early-return to avoid unnecessary work.
LSAN output from t0060:
Direct leak of 121 byte(s) in 1 object(s) allocated from:
#0 0x7f31246f28b0 in realloc (/usr/lib64/libasan.so.4+0xdc8b0)
#1 0x98d7d6 in xrealloc wrapper.c:126
#2 0x909a60 in strbuf_grow strbuf.c:98
#3 0x90bf00 in strbuf_vaddf strbuf.c:401
#4 0x90c321 in strbuf_addf strbuf.c:335
#5 0x5cb78d in relative_url builtin/submodule--helper.c:182
#6 0x5cbe46 in resolve_relative_url_test builtin/submodule--helper.c:248
#7 0x410dcd in run_builtin git.c:475
#8 0x410dcd in handle_builtin git.c:729
#9 0x414087 in run_argv git.c:818
#10 0x414087 in cmd_main git.c:949
#11 0x40e9ec in main common-main.c:52
#12 0x7f3123c41349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 121 byte(s) leaked in 1 allocation(s).
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
realpath is only populated if we execute the git_work_tree_initialized
block. However that block also causes us to return early, meaning we
never actually release the strbuf in the case where we populated it.
Therefore we move all strbuf related code into the block to guarantee
that we can't leak it.
LSAN output from t0095:
Direct leak of 129 byte(s) in 1 object(s) allocated from:
#0 0x49a9b9 in realloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x78f585 in xrealloc wrapper.c:126:8
#2 0x713ff4 in strbuf_grow strbuf.c:98:2
#3 0x713ff4 in strbuf_getcwd strbuf.c:597:3
#4 0x4f0c18 in strbuf_realpath_1 abspath.c:99:7
#5 0x5ae4a4 in set_git_work_tree environment.c:259:3
#6 0x6fdd8a in setup_discovered_git_dir setup.c:931:2
#7 0x6fdd8a in setup_git_directory_gently setup.c:1235:12
#8 0x4cb50d in get_bloom_filter_for_commit t/helper/test-bloom.c:41:2
#9 0x4cb50d in cmd__bloom t/helper/test-bloom.c:95:3
#10 0x4caa1f in cmd_main t/helper/test-tool.c:124:11
#11 0x4caded in main common-main.c:52:11
#12 0x7f0869f02349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 129 byte(s) leaked in 1 allocation(s).
It looks like this leak has existed since realpath was first added to
set_git_work_tree() in:
3d7747e318 (real_path: remove unsafe API, 2020-03-10)
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
origin starts off pointing to somewhere within line, which is owned by
the caller. Later we might allocate a new string using xmemdupz() or
xstrfmt(). To avoid leaking these new strings, we introduce a to_free
pointer - which allows us to safely free the newly allocated string when
we're done (we cannot just free origin directly as it might still be
pointing to line).
LSAN output from t0090:
Direct leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x49a82d in malloc ../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:145:3
#1 0xa71f49 in do_xmalloc wrapper.c:41:8
#2 0xa720b0 in do_xmallocz wrapper.c:75:8
#3 0xa720b0 in xmallocz wrapper.c:83:9
#4 0xa720b0 in xmemdupz wrapper.c:99:16
#5 0x8092ba in handle_line fmt-merge-msg.c:187:23
#6 0x8092ba in fmt_merge_msg fmt-merge-msg.c:666:7
#7 0x5ce2e6 in prepare_merge_message builtin/merge.c:1119:2
#8 0x5ce2e6 in collect_parents builtin/merge.c:1215:3
#9 0x5c9c1e in cmd_merge builtin/merge.c:1454:16
#10 0x4ce83e in run_builtin git.c:475:11
#11 0x4ccafe in handle_builtin git.c:729:3
#12 0x4cb01c in run_argv git.c:818:4
#13 0x4cb01c in cmd_main git.c:949:19
#14 0x6b3fad in main common-main.c:52:11
#15 0x7fb929620349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: AddressSanitizer: 8 byte(s) leaked in 1 allocation(s).
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since Git learned to detect its install location at runtime, there
was the slightly awkward problem that it was impossible to specify paths
relative to said location.
For example, if a version of Git was shipped with custom SSL
certificates to use, there was no portable way to specify
`http.sslCAInfo`.
In Git for Windows, the problem was "solved" for years by interpreting
paths starting with a slash as relative to the runtime prefix.
However, this is not correct: such paths _are_ legal on Windows, and
they are interpreted as absolute paths in the same drive as the current
directory.
After a lengthy discussion, and an even lengthier time to mull over the
problem and its best solution, and then more discussions, we eventually
decided to introduce support for the magic sequence `%(prefix)/`. If a
path starts with this, the remainder is interpreted as relative to the
detected (runtime) prefix. If built without runtime prefix support, Git
will simply interpolate the compiled-in prefix.
If a user _wants_ to specify a path starting with the magic sequence,
they can prefix the magic sequence with `./` and voilà, the path won't
be expanded.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not immediately clear what `expand_user_path()` means, so let's
rename it to `interpolate_path()`. This also opens the path for
interpolating more than just a home directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `real_home` parameter only has an effect when expanding paths
starting with `~/`, not when expanding paths starting with `~<user>/`.
Let's make that clear.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 395de250d9 (Expand ~ and ~user in core.excludesfile,
commit.template, 2009-11-17), the `user_path()` function was refactored
into the `expand_user_path()`. During that refactoring, the `buf`
parameter was lost, but the code comment above said function still talks
about it. Let's remove that stale part of the comment.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, we refrained from adding a regression test in 7b6c6496374
(system_path(): Add prefix computation at runtime if RUNTIME_PREFIX set,
2008-08-10), and in 226c0ddd0d (exec_cmd: RUNTIME_PREFIX on some POSIX
systems, 2018-04-10).
The reason was that it was deemed too tricky to test.
Turns out that it is not tricky to test at all: we simply create a
pseudo-root, copy the `git` executable into the `git/` subdirectory of
that pseudo-root, then copy a script into the `libexec/git-core/`
directory and expect that to be picked up.
As long as the trash directory is in a location where binaries can be
executed, this works.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This parameter has not been used since the function was introduced in
8c8195e9c3 (submodule--helper: introduce add-clone subcommand,
2021-07-10).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
%(rest) is a atom used for cat-file batch mode, which can split
the input lines at the first whitespace boundary, all characters
before that whitespace are considered to be the object name;
characters after that first run of whitespace (i.e., the "rest"
of the line) are output in place of the %(rest) atom.
In order to let "cat-file --batch=%(rest)" use the ref-filter
interface, add %(rest) atom for ref-filter.
Introduce the reject_atom() to reject the atom %(rest) for
"git for-each-ref", "git branch", "git tag" and "git verify-tag".
Reviewed-by: Jacob Keller <jacob.keller@gmail.com>
Suggected-by: Jacob Keller <jacob.keller@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because the perl language can handle binary data correctly,
add the function perl_quote_buf_with_len(), which can specify
the length of the data and prevent the data from being truncated
at '\0' to help `--format="%(raw)"` support `--perl`.
Reviewed-by: Jacob Keller <jacob.keller@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new formatting option `%(raw)`, which will print the raw
object data without any changes. It will help further to migrate
all cat-file formatting logic from cat-file to ref-filter.
The raw data of blob, tree objects may contain '\0', but most of
the logic in `ref-filter` depends on the output of the atom being
text (specifically, no embedded NULs in it).
E.g. `quote_formatting()` use `strbuf_addstr()` or `*._quote_buf()`
add the data to the buffer. The raw data of a tree object is
`100644 one\0...`, only the `100644 one` will be added to the buffer,
which is incorrect.
Therefore, we need to find a way to record the length of the
atom_value's member `s`. Although strbuf can already record the
string and its length, if we want to replace the type of atom_value's
member `s` with strbuf, many places in ref-filter that are filled
with dynamically allocated mermory in `v->s` are not easy to replace.
At the same time, we need to check if `v->s == NULL` in
populate_value(), and strbuf cannot easily distinguish NULL and empty
strings, but c-style "const char *" can do it. So add a new member in
`struct atom_value`: `s_size`, which can record raw object size, it
can help us add raw object data to the buffer or compare two buffers
which contain raw object data.
Note that `--format=%(raw)` cannot be used with `--python`, `--shell`,
`--tcl`, and `--perl` because if the binary raw data is passed to a
variable in such languages, these may not support arbitrary binary data
in their string variable type.
Reviewed-by: Jacob Keller <jacob.keller@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Hariom Verma <hariom18599@gmail.com>
Helped-by: Bagas Sanjaya <bagasdotme@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Felipe Contreras <felipe.contreras@gmail.com>
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Junio C Hamano <gitster@pobox.com>
Based-on-patch-by: Olga Telezhnaya <olyatelezhnaya@gmail.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only tag and commit objects use `grab_sub_body_contents()` to grab
object contents in the current codebase. We want to teach the
function to also handle blobs and trees to get their raw data,
without parsing a blob (whose contents looks like a commit or a tag)
incorrectly as a commit or a tag. So it's needed to pass a
`struct expand_data *data` instread of only `void *buf` to both
`grab_sub_body_contents()` and `grab_values()` to be able to check
the object type.
Skip the block of code that is specific to handling commits and tags
early when the given object is of a wrong type to help later
addition to handle other types of objects in this function.
Reviewed-by: Jacob Keller <jacob.keller@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Hariom Verma <hariom18599@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 'git merge' learned '--autostash' in a03b55530a (merge: teach
--autostash option, 2020-04-07), 'cmd_merge', once it is determined that
we have to create a merge commit, calls 'create_autostash' if
'--autostash' is given.
As explained in a03b55530a, and made more abvious by the tests added in
that commit, the autostash is then applied if the merge succeeds, either
directly or by committing (after conflict resolution or if '--no-commit'
was given), or if the merge is aborted with 'git merge --abort'. In some
other cases, like the user calling 'git reset --merge' or 'git merge
--quit', the autostash is not applied, but saved in the stash list.
However, there exists a scenario that creates an autostash but does not
apply nor save it to the stash list: if the chosen merge strategy
completely fails to handle the merge, i.e. 'try_merge_strategy' returns
2.
Apply the autostash in that case also. An easy way to test that is to
try to merge more than two commits but explicitely ask for the 'recursive'
merge strategy.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 'git merge' learned '--autostash' in a03b55530a (merge: teach
--autostash option, 2020-04-07), 'cmd_merge', in the fast-forward case,
calls 'create_autostash' before calling 'checkout_fast_forward' if
'--autostash' is given.
However, if 'checkout_fast_forward' fails, the autostash is not applied
to the working tree, nor saved in the stash list, since the code simply
calls 'goto done'.
Be more helpful to the user by applying the autostash in that case.
An easy way to test a failing fast-forward is when we are merging a
branch that has a tracked file that conflicts with an untracked file in
the working tree.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for 'git merge --abort' and 'git merge --quit' both
mention the special ref 'MERGE_AUTOSTASH', but this ref is not formally
defined anywhere. Mention it in the description of the '--autostash'
option for 'git merge'.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable 'best_strategy' holds the name of the merge strategy that
resulted in fewer conflicts, if several strategies were tried. When
that's the case but the best strategy was not the first one tried, we
inform the user which strategy was the "best" one before recreating the
merge and leaving the conflicted files in the tree.
This informational message is missing the word "strategy", so it shows
something like:
Using the recursive to prepare resolving by hand.
Fix that.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git read-tree" checks the existence of the blobs referenced by the
given tree, but does not bulk prefetch them. Add a bulk prefetch.
The lack of prefetch here was noticed at $DAYJOB during a merge
involving some specific commits, but I couldn't find a minimal merge
that didn't also trigger the prefetch in check_updates() in
unpack-trees.c (and in all these cases, the lack of prefetch in
cache-tree.c didn't matter because all the relevant blobs would have
already been prefetched by then). This is why I used read-tree here to
exercise this code path.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the prefetching code in unpack-trees.c into its own function,
because it will be used elsewhere in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pack-objects adds an entry to its list of objects to pack, it may
mark the packfile and offset that contains the file, which we can later
use to output the object verbatim. If the packfile is deleted while we
are running (e.g., by another process running "git repack"), we may die
in use_pack() if the pack file cannot be opened.
We worked around this in 4c08018204 (pack-objects: protect against
disappearing packs, 2011-10-14) by making sure we can open the pack
before recording it as a source. This detects a pack which has already
disappeared while generating the packing list, and because we keep the
pack's file descriptor (or an mmap window) open, it means we can access
it later (unless you exceed core.packedgitlimit).
The bitmap code that was added later does not do this; it adds entries
to the packlist without checking that the packfile is still valid, and
is vulnerable to this race. It needs the same treatment as 4c08018204.
However, rather than add it in just that one spot, it makes more sense
to simply open and check the packfile when we open the bitmap.
Technically you can use the .bitmap without even looking in the .pack
file (e.g., if you are just printing a list of objects without accessing
them), but it's much simpler to do it early. That covers all later
direct uses of the pack (due to the cached descriptor) without having to
check each one directly. For example, in pack-objects we need to protect
the packlist entries, but we also access the pack directly as part of
the reuse_partial_pack_from_bitmap() feature. This patch covers both
cases.
There's no test here, because the problem is inherently racy. I
reproduced and verified the fix with this script:
rm -rf parent.git push.git fetch.git
push() {
(
cd push.git &&
echo content >>file &&
git add file &&
git commit -qm "change $1" &&
git push -q origin HEAD &&
echo "push $1..."
) &&
(
cd parent.git &&
git repack -ad -q &&
echo "repack $1..."
)
}
fetch() {
rm -rf fetch.git &&
git clone -q file://$PWD/parent.git fetch.git &&
echo "fetch $1..."
}
git init --bare parent.git &&
git --git-dir=parent.git config transfer.unpacklimit 1 &&
git clone parent.git push.git &&
(for i in `seq 1 1000`; do push $i || break; done) &
pusher=$!
(for i in `seq 1 1000`; do fetch $i || break; done) &
fetcher=$!
wait $fetcher
kill $pusher
That simulates a race between a client cloning and a push triggering a
repack on the server. Without this patch, it generally fails within a
couple hundred iterations with:
remote: fatal: packfile ./objects/pack/.tmp-1377349-pack-498afdec371232bdb99d1757872f5569331da61e.pack cannot be accessed
error: git upload-pack: git-pack-objects died with error.
fatal: git upload-pack: aborting due to possible repository corruption on the remote side.
remote: aborting due to possible repository corruption on the remote side.
fatal: early EOF
fatal: fetch-pack: invalid index-pack output
With this patch, it reliably runs through all thousand attempts.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to tell who invoked Git - was it invoked manually by a
user via CLI or script? By an IDE? In some cases - like 'repo' tool -
we can influence the source code and set the GIT_TRACE2_PARENT_SID
environment variable from the caller process. In 'repo''s case, that
parent SID is manipulated to include the string "repo", which means we
can positively identify when Git was invoked by 'repo' tool. However,
identifying parents that way requires both that we know which tools
invoke Git and that we have the ability to modify the source code of
those tools. It cannot scale to keep up with the various IDEs and
wrappers which use Git, most of which we don't know about. Learning
which tools and wrappers invoke Git, and how, would give us insight to
decide where to improve Git's usability and performance.
Unfortunately, there's no cross-platform reliable way to gather the name
of the parent process. If procfs is present, we can use that; otherwise
we will need to discover the name another way. However, the process ID
should be sufficient to look up the process name on most platforms, so
that code may be shareable.
Git for Windows gathers similar information and logs it as a "data_json"
event. However, since "data_json" has a variable format, it is difficult
to parse effectively in some languages; instead, let's pursue a
dedicated "cmd_ancestry" event to record information about the ancestry
of the current process and a consistent, parseable way.
Git for Windows also gathers information about more than one generation
of parent. In Linux further ancestry info can be gathered with procfs,
but it's unwieldy to do so. In the interest of later moving Git for
Windows ancestry logging to the 'cmd_ancestry' event, and in the
interest of later adding more ancestry to the Linux implementation - or
of adding this functionality to other platforms which have an easier
time walking the process tree - let's make 'cmd_ancestry' accept an
array of parentage.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To pave the way for non-Windows platforms to define
trace2_collect_process_info(), reorganize the stub-or-definition schema
to something which doesn't directly reference Windows.
Platforms which want to collect parent process information in the
future should:
1. Add an implementation to compat/ (e.g. compat/somearch/procinfo.c)
2. Add that object to COMPAT_OBJS to config.mak.uname
(e.g. COMPAT_OBJS += compat/somearch/procinfo.o)
3. Define HAVE_PLATFORM_PROCINFO in config.mak.uname
In the Windows case, this definition lives in
compat/win32/trace2_win32_process_info.c, which is already conditionally
added to COMPAT_OBJS; so let's add HAVE_PLATFORM_PROCINFO to hint to the
build that compat/stub/procinfo.c should not be used.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the bundle tests to fully compare the expected "git ls-remote"
or "git bundle list-heads" output, instead of merely grepping it.
This avoids subtle regressions in the tests. In
f62e0a39b6 (t5704 (bundle): add tests for bundle --stdin, 2010-04-19)
the "bundle --stdin <rev-list options>" test was added to make sure we
didn't include the tag.
But since the --stdin mode didn't work until 5bb0fd2cab (bundle:
arguments can be read from stdin, 2021-01-11) our grepping of
"master" (later "main") missed the important part of the test.
Namely that we should not include the "refs/tags/tag" tag in that
case. Since the test only grepped for "main" in the output we'd miss a
regression in that code.
So let's use test_cmp instead, and also in the other nearby tests
where it's easy.
This does make things a bit more verbose in the case of the test
that's checking the bundle header, since it's different under SHA1 and
SHA256. I think this makes test easier to follow.
I've got some WIP changes to extend the "git bundle" command to dump
parts of the header out, which are easier to understand if we test the
output explicitly like this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change uses of ":" on the LHS of a ">" to the more commonly used
">file" pattern in t/t5607-clone-bundle.sh.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list" learns to omit the "commit <object-name>" header
lines from the output with the `--no-commit-header` option.
* bc/rev-list-without-commit-line:
rev-list: add option for --pretty=format without header
GitHub Actions / CI update.
* js/ci-windows-update:
ci: accelerate the checkout
ci (vs-build): build with NO_GETTEXT
artifacts-tar: respect NO_GETTEXT
ci (windows): transfer also the Git-tracked files to the test jobs
ci: upgrade to using actions/{up,down}load-artifacts v2
ci (vs-build): use `cmd` to copy the DLLs, not `powershell`
ci: use the new GitHub Action to download git-sdk-64-minimal
"git send-email" optimization.
* ab/send-email-optim:
perl: nano-optimize by replacing Cwd::cwd() with Cwd::getcwd()
send-email: move trivial config handling to Perl
perl: lazily load some common Git.pm setup code
send-email: lazily load modules for a big speedup
send-email: get rid of indirect object syntax
send-email: use function syntax instead of barewords
send-email: lazily shell out to "git var"
send-email: lazily load config for a big speedup
send-email: copy "config_regxp" into git-send-email.perl
send-email: refactor sendemail.smtpencryption config parsing
send-email: remove non-working support for "sendemail.smtpssl"
send-email tests: test for boolean variables without a value
send-email tests: support GIT_TEST_PERL_FATAL_WARNINGS=true
Replace the discussion of Travis CI added in
0e5d028a7a (Documentation: add setup instructions for Travis CI,
2016-05-02) with something that covers the GitHub Actions added in
889cacb689 (ci: configure GitHub Actions for CI/PR, 2020-04-11).
The setup is trivial compared to using Travis, and it even works on
Windows (that "hopefully soon" comment was probably out-of-date on
Travis as well).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the section discussing the addition of a SOB trailer above the
section that discusses generating the patch itself. This makes sense
as we don't want someone to go through the process of "git
format-patch", only to realize late that they should have used "git
commit -s" or equivalent.
This is a move-only change, no lines here are being altered, only
moved around.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With multiple heads, we should not allow rebasing or fast-forwarding.
Make sure any fast-forward request calls out specifically the fact that
multiple branches are in play. Also, since we cannot fast-forward to
multiple branches, fix our computation of can_ff.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-pull.txt includes merge-options.txt, which is written assuming
merges will happen. git-pull has allowed rebases for many years; update
the documentation to reflect that.
While at it, pass any `--signoff` flag through to the rebase backend too
so that we don't have to document it as merge-specific. Rebase has
supported the --signoff flag for years now as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have for some time shown a long warning when the user does not
specify how to reconcile divergent branches with git pull. Make it an
error now.
Initial-patch-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the last few precedence tests failing in t7601 by now implementing
the logic to have --[no-]rebase override a pull.ff=only config setting.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are both merge and rebase branches in the logic, and previously
both had to handle fast-forwarding. Merge handled that implicitly
(because git merge handles it directly), while in rebase it was
explicit. Given that the --ff-only flag is meant to override any
--rebase or --no-rebase, make the code reflect that by handling
--ff-only before the merge-vs-rebase logic.
It turns out that this also fixes a bug for submodules. Previously,
when --ff-only was given, the code would run `merge --ff-only` on the
main module, and then run `submodule update --recursive --rebase` on the
submodules. With this change, we still run `merge --ff-only` on the
main module, but now run `submodule update --recursive --checkout` on
the submodules. I believe this better reflects the intent of --ff-only
to have it apply to both the main module and the submodules.
(Sidenote: It is somewhat interesting that all merges pass `--checkout`
to submodule update, even when `--no-ff` is specified, meaning that it
will only do fast-forward merges for submodules. This was discussed in
commit a6d7eb2c7a ("pull: optionally rebase submodules (remote submodule
changes only)", 2017-06-23). The same limitations apply now as then, so
we are not trying to fix this at this time.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the "FORCE" dependency from the "tags", "TAGS" and "cscope"
targets, instead make them depend on whether or not the relevant
source files have changed.
For the cscope target we need to change it to depend on the actual
generated file while we generate while we're at it, as the next commit
will discuss we always generate a cscope.out file.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull --rebase=false" means we merge their history into ours, but
it has been described the other way around.
Cc: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
[jc: updated the log message]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the "check_sub_test_lib_test()" and its sister functions to a new
lib-subtest.sh.
In the future (not in this series) I'd like to test test-lib's output
in a more targeted and smaller test, and I'll need these functions to
do that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The warning about pulling without specifying how to reconcile divergent
branches says that after setting pull.rebase to true, --ff-only can
still be passed on the command line to require a fast-forward. Make that
actually work.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
[en: updated tests; note 3 fixes and 1 new failure]
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were already code checking that --rebase was incompatible with
a merge of multiple heads. However, we were sometimes throwing warnings
about lack of specification of rebase vs. merge when given multiple
heads. Since rebasing is disallowed with multiple merge heads, that
seems like a poor warning to print; we should instead just assume
merging is wanted.
Add a few tests checking multiple merge head behavior.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interaction of rebase and merge flags and options was not well
tested. Add several tests to check for correct behavior from the
following rules:
* --ff-only vs. --[no-]rebase
(and the related pull.ff=only vs. pull.rebase)
* --rebase[=!false] vs. --no-ff and --ff
(and the related pull.rebase=!false overrides pull.ff=!only)
* command line flags take precedence over config, except:
* --no-rebase heeds pull.ff=!only
* pull.rebase=!false vs --no-ff and --ff
For more details behind these rules and a larger table of individual
cases, refer to https://lore.kernel.org/git/xmqqwnpqot4m.fsf@gitster.g/
and the links found therein.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code that eventually became filter_bitmap_exclude_type() was
originally introduced in 4f3bd5606a (pack-bitmap: implement BLOB_NONE
filtering, 2020-02-14) to accelerate BLOB_NONE filters with bitmaps.
In 856e12c18a (pack-bitmap.c: make object filtering functions generic,
2020-05-04), it became filter_bitmap_exclude_type(). But not all of the
comments were updated to be agnostic to the provided type.
Remove the remaining comments which should have been updated in
856e12c18a to reflect the type-agnostic nature of the function.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running unpack_trees() with a sparse index, we attempt to operate
on the index without expanding the sparse directory entries. Thus, we
operate by manipulating entire directories and passing them to the
unpack function. In the case of the 'git checkout' command, this is the
twoway_merge() function.
There are several cases in twoway_merge() that handle different
situations. One new one to add is the case of a directory/file conflict
where the directory is sparse. Before the sparse index, such a conflict
would appear as a list of file additions and deletions. Now,
twoway_merge() initializes 'current', 'oldtree', and 'newtree' from
src[0], src[1], and src[2], then sets 'oldtree' to NULL because it is
equal to the df_conflict_entry. The way to determine that we have a
directory/file conflict is to test that 'current' and 'newtree' disagree
on being sparse directory entries.
When we are in this case, we want to resolve the situation by calling
merged_entry(). This allows replacing the 'current' entry with the
'newtree' entry. This is important for cases where we want to run 'git
checkout' across the conflict and have the new HEAD represent the new
file type at that path. The first NEEDSWORK comment dropped in t1092
demonstrates this necessary behavior.
However, we still are in a confusing state when 'current' corresponds to
a staged change within a sparse directory that is not present at HEAD.
This should be atypical, because it requires adding a change outside of
the sparse-checkout cone, but it is possible. Since we are unable to
determine that this is a staged change within twoway_merge(), we cannot
add a case to reject the merge at this point. I believe this is due to
the use of df_conflict_entry in the place of 'oldtree' instead of using
the valud at HEAD, which would provide some perspective to this
decision. Any change that would allow this differentiation for staged
entries would need to involve information further up in unpack_trees().
That work should be done, sometime, because we are further confusing the
behavior of a directory/file conflict when staging a change in the
directory. The two cases 'checkout behaves oddly with df-conflict-?' in
t1092 demonstrate that even without a sparse-checkout, Git is not
consistent in its behavior. Neither of the two options seems correct,
either. This change makes the sparse-index behave differently than the
typcial sparse-checkout case, but it does match the full checkout
behavior in the df-conflict-2 case.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new branches to the test repo that demonstrate directory/file
conflicts in different ways. Since the directory 'folder1/' has
adjacent files 'folder1-', 'folder1.txt', and 'folder10' it causes
searches for 'folder1/' to land in a different place in the index than a
search for 'folder1'. This causes a change in behavior when working with
the df-conflict-1 and df-conflict-2 branches, whose only difference is
that the first uses 'folder1' as the conflict and the other uses
'folder2' which does not have these adjacent files.
We can extend two tests that compare the behavior across different 'git
checkout' commands, and we see already that the behavior will be
different in some cases and not in others. The difference between the
two test loops is that one uses 'git reset --hard' between iterations.
Further, we isolate the behavior of creating a staged change within a
directory and then checking out a branch where that directory is
replaced with a file. A full checkout behaves differently across these
two cases, while a sparse-checkout cone behaves consistently. In both
cases, the behavior is wrong. In one case, the staged change is dropped
entirely. The other case the staged change is kept, replacing the file
at that location, but none of the other files in the directory are kept.
Likely, the correct behavior in this case is to reject the checkout and
report the conflict, leaving HEAD in its previous location. None of the
cases behave this way currently. Use comments to demonstrate that the
tested behavior is only a documentation of the current, incorrect
behavior to ensure we do not _accidentally_ change it. Instead, we would
prefer to change it on purpose with a future change.
At this point, the sparse-index does not handle these 'git checkout'
commands correctly. Or rather, it _does_ reject the 'git checkout' when
we have the staged change, but for the wrong reason. It also rejects the
'git checkout' commands when there is no staged change and we want to
replace a directory with a file. A fix for that unstaged case will
follow in the next change, but that will make the sparse-index agree
with the full checkout case in these documented incorrect behaviors.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The doc for 'submodule.recurse' starts with "Specifies if commands
recurse into submodles by default". This is not exactly true of all
commands that have a '--recurse-submodules' option. For example, 'git
pull --recurse-submodules' does not run 'git pull' in each submodule,
but rather runs 'git submodule update --recursive' so that the submodule
working trees after the pull matches the commits recorded in the
superproject.
Clarify that by just saying that it enables '--recurse-submodules'.
Note that the way this setting interacts with 'fetch.recurseSubmodules'
and 'push.recurseSubmodules', which can have other values than true or
false, is already documented since 4da9e99e6e (doc: be more precise on
(fetch|push).recurseSubmodules, 2020-04-06).
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the end of the FILES section, we indicate that you can override the
regular lookup rules with --global, etc. But:
- we're missing the --local option
- we point to GIT_CONFIG instead of --file, but the latter has much
better documentation
- we're vague about how the overrides work; the actual option
descriptions are much better here
So let's just mention the names and point people back to the OPTIONS
section. We could perhaps even delete this paragraph entirely, but the
presence of the names may give people reading FILES a clue about where
to look for more information.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The scope and utility of the GIT_CONFIG variable was drastically reduced
by dc87183189 (Only use GIT_CONFIG in "git config", not other programs,
2008-06-30). But the documentation in git-config(1) predates that, which
makes it rather misleading.
These days it is really just another way to say "--file". So let's say
that, and explicitly make it clear that it does not impact other Git
commands (like GIT_CONFIG_SYSTEM, etc, would).
I also bumped it to the bottom of the list of variables, and warned
people off of using it. We don't have any plans for deprecation at this
point, but there's little point in encouraging people to use it by
putting it at the top of the list.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The explanation for the --file option only refers to GIT_CONFIG. This
redirection to an environment variable is confusing, but doubly so
because the description of GIT_CONFIG is out of date.
Let's describe --file from scratch, detailing both the reading and
writing behavior as we do for other similar options like --system, etc.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merge algorithm mostly consists of the following three functions:
collect_merge_info()
detect_and_process_renames()
process_entries()
Prior to the trivial directory resolution optimization of the last half
dozen commits, process_entries() was consistently the slowest, followed
by collect_merge_info(), then detect_and_process_renames(). When the
trivial directory resolution applies, it often dramatically decreases
the amount of time spent in the two slower functions.
Looking at the performance results in the previous commit, the trivial
directory resolution optimization helps amazingly well when there are no
relevant renames. It also helps really well when reapplying a long
series of linear commits (such as in a rebase or cherry-pick), since the
relevant renames may well be cached from the first reapplied commit.
But when there are any relevant renames that are not cached (represented
by the just-one-mega testcase), then the optimization does not help at
all.
Often, I noticed that when the optimization does not apply, it is
because there are a handful of relevant sources -- maybe even only one.
It felt frustrating to need to recurse into potentially hundreds or even
thousands of directories just for a single rename, but it was needed for
correctness.
However, staring at this list of functions and noticing that
process_entries() is the most expensive and knowing I could avoid it if
I had cached renames suggested a simple idea: change
collect_merge_info()
detect_and_process_renames()
process_entries()
into
collect_merge_info()
detect_and_process_renames()
<cache all the renames, and restart>
collect_merge_info()
detect_and_process_renames()
process_entries()
This may seem odd and look like more work. However, note that although
we run collect_merge_info() twice, the second time we get to employ
trivial directory resolves, which makes it much faster, so the increased
time in collect_merge_info() is small. While we run
detect_and_process_renames() again, all renames are cached so it's
nearly a no-op (we don't call into diffcore_rename_extended() but we do
have a little bit of data structure checking and fixing up). And the
big payoff comes from the fact that process_entries(), will be much
faster due to having far fewer entries to process.
This restarting only makes sense if we can save recursing into enough
directories to make it worth our while. Introduce a simple heuristic to
guide this. Note that this heuristic uses a "wanted_factor" that I have
virtually no actual real world data for, just some back-of-the-envelope
quasi-scientific calculations that I included in some comments and then
plucked a simple round number out of thin air. It could be that
tweaking this number to make it either higher or lower improves the
optimization. (There's slightly more here; when I first introduced this
optimization, I used a factor of 10, because I was completely confident
it was big enough to not cause slowdowns in special cases. I was
certain it was higher than needed. Several months later, I added the
rough calculations which make me think the optimal number is close to 2;
but instead of pushing to the limit, I just bumped it to 3 to reduce the
risk that there are special cases where this optimization can result in
slowing down the code a little. If the ratio of path counts is below 3,
we probably will only see minor performance improvements at best
anyway.)
Also, note that while the diffstat looks kind of long (nearly 100
lines), more than half of it is in two comments explaining how things
work.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 205.1 ms ± 3.8 ms 204.2 ms ± 3.0 ms
mega-renames: 1.564 s ± 0.010 s 1.076 s ± 0.015 s
just-one-mega: 479.5 ms ± 3.9 ms 364.1 ms ± 7.0 ms
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This combines the work of the last several patches, and implements the
conditions when we don't need to recurse into directories. It's perhaps
easiest to see the logic by separating the fact that a directory might
have both rename sources and rename destinations:
* rename sources: only files present in the merge base can serve as
rename sources, and only when one side deletes that file. When the
tree on one side matches the merge base, that means every file
within the subtree matches the merge base. This means that the
skip-irrelevant-rename-detection optimization from before kicks in
and we don't need any of these files as rename sources.
* rename destinations: the tree that does not match the merge base
might have newly added and hence unmatched destination files.
This is what usually prevents us from doing trivial directory
resolutions in the merge machinery. However, the fact that we have
deferred recursing into this directory until the end means we know
whether there are any unmatched relevant potential rename sources
elsewhere in this merge. If there are no unmatched such relevant
sources anywhere, then there is no need to look for unmatched
potential rename destinations to match them with.
This informs our algorithm:
* Search through relevant_sources; if we have entries, they better all
be reflected in cached_pairs or cached_irrelevant, otherwise they
represent an unmatched potential rename source (causing the
optimization to be disallowed).
* For any relevant_source represented in cached_pairs, we do need to
to make sure to get the destination for each source, meaning we need
to recurse into any ancestor directories of those destinations.
* Once we've recursed into all the rename destinations for any
relevant_sources in cached_pairs, we can then do the trivial
directory resolution for the remaining directories.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 5.235 s ± 0.042 s 205.1 ms ± 3.8 ms
mega-renames: 9.419 s ± 0.107 s 1.564 s ± 0.010 s
just-one-mega: 480.1 ms ± 3.9 ms 479.5 ms ± 3.9 ms
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When one side of history matches the merge base (including when the
merge base has no entry for the given directory), have
collect_merge_info_callback() defer recursing into the directory. To
ensure those entries are eventually handled, add a call to
handled_deferred_entries() in collect_merge_info() after
traverse_trees() returns.
Note that the condition in collect_merge_info_callback() may look more
complicated than necessary at first glance;
renames->trivial_merges_okay[side] is always true until
handle_deferred_entries() is called, and possible_trivial_merges[side]
is always empty right now (and in the future won't be filled until
handle_deferred_entries() is called). However, when
handle_deferred_entries() calls traverse_trees() for the relevant
deferred directories, those traverse_trees() calls will once again end
up in collect_merge_info_callback() for all the entries under those
subdirectories. The extra conditions are there for such deferred cases
and will be used more as we do more with those variables.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to allow trivial directory resolution, we first need to be able
to gather more information to determine if the optimization is safe. To
enable that, we need a way of deferring the recursion into the directory
until a later time. Naturally, deferring the entry into a subtree means
that we need some function that will later recurse into the subdirectory
exactly the same way that collect_merge_info_callback() would have done.
Add a helper function that does this. For now this function is not used
but a subsequent commit will change that. Future commits will also make
the function sometimes resolve directories instead of traversing inside.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noted a few commits ago, we can resolve individual files early if all
three sides of the merge have a file at the path and two of the three
sides match. We would really like to do the same thing with
directories, because being able to do a trivial directory resolve means
we don't have to recurse into the directory, potentially saving us a
huge amount of time in both collect_merge_info() and process_entries().
Unfortunately, resolving directories early would mean missing any
renames whose source or destination is underneath that directory.
If we somehow knew there weren't any renames under the directory in
question, then we could resolve it early. Sadly, it is impossible to
determine whether there are renames under the directory in question
without recursing into it, and this has traditionally kept us from ever
implementing such an optimization.
In commit f89b4f2bee ("merge-ort: skip rename detection entirely if
possible", 2021-03-11), we added an additional reason that rename
detection could be skipped entirely -- namely, if no *relevant* sources
were present. Without completing collect_merge_info_callback(), we do
not yet know if there are no relevant sources. However, we do know that
if the current directory on one side matches the merge base, then every
source file within that directory will not be RELEVANT_CONTENT, and a
few simple checks can often let us rule out RELEVANT_LOCATION as well.
This suggests we can just defer recursing into such directories until
the end of collect_merge_info.
Since the deferred directories are known to not add any relevant sources
due to the above properties, then if there are no relevant sources after
we've traversed all paths other than the deferred ones, then we know
there are not any relevant sources. Under those conditions, rename
detection is unnecessary, and that means we can resolve the deferred
directories without recursing into them.
Note that the logic for skipping rename detection was also modified
further in commit 76e253793c ("merge-ort, diffcore-rename: employ cached
renames when possible", 2021-01-30); in particular rename detection can
be skipped if we already have cached renames for each relevant source.
We can take advantage of this information as well with our deferral of
recursing into directories where one side matches the merge base.
Add some data structures that we will use to do these deferrals, with
some lengthy comments explaining their purpose.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patch possibly raises some questions about whether
additional cases in collect_merge_info_callback() can be handled early.
Add some explanations in the form of comments to help explain these
better. While we're at it, add a few comments to denote what a few
boolean '0' or '1' values stand for.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there are no directories involved at a given path, and all three
sides have a file at that path, and two of the three sides of history
match, we can immediately resolve the merge of that path in
collect_merge_info() and do not need to wait until process_entries().
This is actually a very minor improvement: half the time when I run it,
I see an improvement; the other half a slowdown. It seems to be in the
range of noise. However, this idea serves as the beginning of some
bigger optimizations coming in the following patches.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Testcases in t0000 are quite special given that they many of them run
nested testcases to verify that testing functionality itself works as
expected. These nested testcases are realized by writing a new ad-hoc
test script which again sources test-lib.sh, where the new script is
created in a nested subdirectory located beneath the current trash
directory. We then execute the new test script with the nested
subdirectory as current working directory and explicitly re-export
TEST_OUTPUT_DIRECTORY to point to that directory.
While this works as expected in the general case, it falls apart when
the developer has TEST_OUTPUT_DIRECTORY explicitly defined either via
the environment or via config.mak and runs "make test". In that case,
test-lib.sh will clobber the value that we've just carefully set up to
instead contain what the developer has defined. As a result, the
TEST_OUTPUT_DIRECTORY continues to point at the root output directory,
not at the nested one.
This issue causes breakage in the 'test_atexit is run' test case: the
nested test case writes files into "../../", which is assumed to be the
parent's trash directory. But because TEST_OUTPUT_DIRECTORY already
points to to the root output directory, we instead end up writing those
files outside of the output directory. The parent test case will then
try to check whether those files still exist in its own trash directory,
which thus must fail now.
Fix the issue by adding a new TEST_OUTPUT_DIRECTORY_OVERRIDE variable.
If set, then we'll always override the TEST_OUTPUT_DIRECTORY with its
value after sourcing GIT-BUILD-OPTIONS.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since cd57bc41bb (builtin/multi-pack-index.c: display usage on
unrecognized command, 2021-03-30) we have used a "usage" label to avoid
having two separate callers of usage_with_options (one when no arguments
are given, and another for unrecognized sub-commands).
But the first caller has been broken since cd57bc41bb, since it will
happily jump to usage without arguments, and then pass argv[0] to the
"unrecognized subcommand" error.
Many compilers will save us from a segfault here, but the end result is
ugly, since it mentions an unrecognized subcommand when we didn't even
pass one, and (on GCC) includes "(null)" in its output.
Move the "usage" label down past the error about unrecognized
subcommands so that it is only triggered when it should be. While we're
at it, bulk up our test coverage in this area, too.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the empty prefix ("") stand out better.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t0000, we run several fake "sub-test" suites to verify the behavior
of the test suite. But because we don't clear the parent environment
completely, the sub-tests can be fooled by variables meant for the
parent. For example:
GIT_SKIP_TESTS=t1234 ./t0000-basic.sh
fails when a sub-test expects its fake t1234 to actually run. This
particular pattern is unlikely in practice; we're running a single
script, and there is no t1234 in the real test suite anyway (not yet, at
least). A more real-world example is:
GIT_SKIP_TESTS=t[^0]* make test
to run only the t0* tests.
The fix is conceptually simple: we should clear the GIT_SKIP_TESTS
variable when running the sub-tests, because its contents (if any) will
be meant for the main test suite. This is easy to do centrally in our
sub-test helper.
But there's a catch: some of our tests do set GIT_SKIP_TESTS
intentionally to test the feature. We need to allow them to continue to
set it, but clear it for all the other tests. And the sub-test helper
can't tell if the GIT_SKIP_TESTS it sees is from a test or not. We can
handle this by adding a new option to the helper to let callers specify
the skip list.
I considered adding a more general "--eval" option to let callers set up
the env for the sub-test however they like. That would cover this case
and possible future ones. But the quoting gets awkward for the callers
(since we're now 2 layers deep in evals!), so I went with the simpler
more specific solution.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell+perl "[de]packetize()" helper functions were added in
4414a15002 (t/lib-git-daemon: add network-protocol helpers,
2018-01-24), and around the same time we added the "pkt-line" helper
in 74e7002961 (test-pkt-line: introduce a packet-line test helper,
2018-03-14).
For some reason it seems we've mostly used the shell+perl version
instead of the helper since then. There were discussions around
88124ab263 (test-lib-functions: make packetize() more efficient,
2020-03-27) and cacae4329f (test-lib-functions: simplify packetize()
stdin code, 2020-03-29) to improve them and make them more efficient.
There was one good reason to do so, we needed an equivalent of
"test-tool pkt-line pack", but that command wasn't capable of handling
input with "\n" (a feature) or "\0" (just because it happens to be
printf-based under the hood).
Let's add a "pkt-line-raw" helper for that, and expose is at a
packetize_raw() to go with the existing packetize() on the shell
level, this gives us the smallest amount of change to the tests
themselves.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the documentation not to assume users are of certain gender
and adds to guidelines to do so.
* ds/gender-neutral-doc:
*: fix typos
comments: avoid using the gender of our users
doc: avoid using the gender of other people
Prepare the internals for lazily fetching objects in submodules
from their promisor remotes.
* jt/partial-clone-submodule-1:
promisor-remote: teach lazy-fetch in any repo
run-command: refactor subprocess env preparation
submodule: refrain from filtering GIT_CONFIG_COUNT
promisor-remote: support per-repository config
repository: move global r_f_p_c to repo struct
Code cleanup around struct_type_init() functions.
* ab/struct-init:
string-list.h users: change to use *_{nodup,dup}()
string-list.[ch]: add a string_list_init_{nodup,dup}()
dir.[ch]: replace dir_init() with DIR_INIT
*.c *_init(): define in terms of corresponding *_INIT macro
*.h: move some *_INIT to designated initializers
Test clean-up.
* hn/refs-test-cleanup:
t7509: avoid direct file access for writing CHERRY_PICK_HEAD
t1415: avoid direct filesystem access for writing refs
Code clean-up and leak plugging in "git bundle".
* ab/bundle-updates:
bundle: remove "ref_list" in favor of string-list.c API
bundle.c: use a temporary variable for OIDs and names
bundle cmd: stop leaking memory from parse_options_cmd_bundle()
Fill test gaps.
* ab/mktag-tests:
mktag tests: test fast-export
mktag tests: test for-each-ref
mktag tests: test update-ref and reachable fsck
mktag tests: test hash-object --literally and unreachable fsck
mktag tests: invert --no-strict test
mktag tests: parse out options in helper
Fill test gaps.
* ab/show-branch-tests:
show-branch tests: add missing tests
show-branch: don't <COLOR></RESET> for space characters
show-branch tests: modernize test code
show-branch tests: rename the one "show-branch" test file
Code recently added to support common ancestry negotiation during
"git push" did not sanity check its arguments carefully enough.
* ab/fetch-negotiate-segv-fix:
fetch: fix segfault in --negotiate-only without --negotiation-tip=*
fetch: document the --negotiate-only option
send-pack.c: move "no refs in common" abort earlier
Update the location of system-side configuration file on Windows.
* js/gfw-system-config-loc-fix:
config: normalize the path of the system gitconfig
cmake(windows): set correct path to the system Git config
mingw: move Git for Windows' system config where users expect it
When rebuilding the multi-pack index file reusing an existing one,
we used to blindly trust the existing file and ended up carrying
corrupted data into the updated file, which has been corrected.
* tb/midx-use-checksum:
midx: report checksum mismatches during 'verify'
midx: don't reuse corrupt MIDXs when writing
commit-graph: rewrite to use checksum_valid()
csum-file: introduce checksum_valid()
The merge code had funny interactions between content based rename
detection and directory rename detection.
* en/merge-dir-rename-corner-case-fix:
merge-recursive: handle rename-to-self case
merge-ort: ensure we consult df_conflict and path_conflicts
t6423: test directory renames causing rename-to-self
Performance tweaks of "git merge -sort" around lazy fetching of objects.
* en/ort-perf-batch-13:
merge-ort: add prefetching for content merges
diffcore-rename: use a different prefetch for basename comparisons
diffcore-rename: allow different missing_object_cb functions
t6421: add tests checking for excessive object downloads during merge
promisor-remote: output trace2 statistics for number of objects fetched
More fix-ups and optimization to "merge -sort".
* en/ort-perf-batch-12:
merge-ort: miscellaneous touch-ups
Fix various issues found in comments
diffcore-rename: avoid unnecessary strdup'ing in break_idx
merge-ort: replace string_list_df_name_compare with faster alternative
Technical writing seeks to convey information with minimal
friction. One way that a reader can experience friction is if they
encounter a description of "a user" that is later simplified using a
gendered pronoun. If the reader does not consider that pronoun to
apply to them, then they can experience cognitive dissonance that
removes focus from the information.
Give some basic tips to guide us avoid unnecessary uses of gendered
description.
Using a gendered pronoun is appropriate when referring to a specific
person.
There are acceptable existing uses of gendered pronouns within the
Git codebase, such as:
* References to real people (e.g. Linus Torvalds, "the Git maintainer").
Do not misgender real people. If there is any doubt to the gender of a
person, then avoid using pronouns.
* References to fictional people with clear genders (e.g. Alice and
Bob).
* Sample text used in test cases (e.g t3702, t6432).
* The official text of the GPL license contains uses of "he or she",
but using singular "they" (or modifying the text in some other
way) is not within the scope of the Git project.
* Literal email messages in Documentation/howto/ should not be edited
for grammatical concerns such as this, unless we update the entire
document to fit the standard documentation format. If such an effort is
taken on, then the authorship would change and no longer refer to the
exact mail message.
* External projects consumed in contrib/ should not deviate solely for
style reasons. Recommended edits should be contributed to those
projects directly.
Other cases within the Git project were cleaned up by the previous
changes.
Co-authored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 'OPT_ALIAS' was created in 5c387428f1 (parse-options: don't emit
"ambiguous option" for aliases, 2019-04-29), 'git clone
--git-completion-helper', which is used by the Bash completion script to
list options accepted by clone (via '__gitcomp_builtin'), lists both
'--recurse-submodules' and its alias '--recursive', which was not the
case before since '--recursive' had the PARSE_OPT_HIDDEN flag set, and
options with this flag are skipped by 'parse-options.c::show_gitcomp',
which implements 'git <cmd> --git-completion-helper'.
This means that typing 'git clone --recurs<TAB>' will yield both
'--recurse-submodules' and '--recursive', which is not ideal since both
do the same thing, and so the completion should directly complete the
canonical option.
At the point where 'show_gitcomp' is called in 'parse_options_step',
'preprocess_options' was already called in 'parse_options', so any
aliases are now copies of the original options with a modified help text
indicating they are aliases.
Helpfully, since 64cc539fd2 (parse-options: don't leak alias help
messages, 2021-03-21) these copies have the PARSE_OPT_FROM_ALIAS flag
set, so check that flag early in 'show_gitcomp' and do not print them,
unless the user explicitely requested that *all* completion be shown (by
setting 'GIT_COMPLETION_SHOW_ALL'). After all, if we want to encourage
the use of '--recurse-submodules' over '--recursive', we'd better just
suggest the former.
The only other options alias is 'log' and friends' '--mailmap', which is
an alias for '--use-mailmap', but the Bash completion helpers for these
commands do not use '__gitcomp_builtin', and thus are unnaffected by
this change.
Test the new behaviour in t9902-completion.sh. As a side effect, this
also tests the correct behaviour of GIT_COMPLETION_SHOW_ALL, which was
not tested before. Note that since '__gitcomp_builtin' caches the
options it shows, we need to re-source the completion script to clear
that cache for the second test.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were last bumped in commit 92c57e5c1d (bump rename limit
defaults (again), 2011-02-19), and were bumped both because processors
had gotten faster, and because people were getting ugly merges that
caused problems and reporting it to the mailing list (suggesting that
folks were willing to spend more time waiting).
Since that time:
* Linus has continued recommending kernel folks to set
diff.renameLimit=0 (maps to 32767, currently)
* Folks with repositories with lots of renames were happy to set
merge.renameLimit above 32767, once the code supported that, to
get correct cherry-picks
* Processors have gotten faster
* It has been discovered that the timing methodology used last time
probably used too large example files.
The last point is probably worth explaining a bit more:
* The "average" file size used appears to have been average blob size
in the linux kernel history at the time (probably v2.6.25 or
something close to it).
* Since bigger files are modified more frequently, such a computation
weights towards larger files.
* Larger files may be more likely to be modified over time, but are
not more likely to be renamed -- the mean and median blob size
within a tree are a bit higher than the mean and median of blob
sizes in the history leading up to that version for the linux
kernel.
* The mean blob size in v2.6.25 was half the average blob size in
history leading to that point
* The median blob size in v2.6.25 was about 40% of the mean blob size
in v2.6.25.
* Since the mean blob size is more than double the median blob size,
any file as big as the mean will not be compared to any files of
median size or less (because they'd be more than 50% dissimilar).
* Since it is the number of files compared that provides the O(n^2)
behavior, median-sized files should matter more than mean-sized
ones.
The combined effect of the above is that the file size used in past
calculations was likely about 5x too large. Combine that with a CPU
performance improvement of ~30%, and we can increase the limits by
a factor of sqrt(5/(1-.3)) = 2.67, while keeping the original stated
time limits.
Keeping the same approximate time limit probably makes sense for
diff.renameLimit (there is no progress feedback in e.g. git log -p),
but the experience above suggests merge.renameLimit could be extended
significantly. In fact, it probably would make sense to have an
unlimited default setting for merge.renameLimit, but that would
likely need to be coupled with changes to how progress is displayed.
(See https://lore.kernel.org/git/YOx+Ok%2FEYvLqRMzJ@coredump.intra.peff.net/
for details in that area.) For now, let's just bump the approximate
time limit from 10s to 1m.
(Note: We do not want to use actual time limits, because getting results
that depend on how loaded your system is that day feels bad, and because
we don't discover that we won't get all the renames until after we've
put in a lot of work rather than just upfront telling the user there are
too many files involved.)
Using the original time limit of 2s for diff.renameLimit, and bumping
merge.renameLimit from 10s to 60s, I found the following timings using
the simple script at the end of this commit message (on an AWS c5.xlarge
which reports as "Intel(R) Xeon(R) Platinum 8124M CPU @ 3.00GHz"):
N Timing
1300 1.995s
7100 59.973s
So let's round down to nice even numbers and bump the limits from
400->1000, and from 1000->7000.
Here is the measure_rename_perf script (adapted from
https://lore.kernel.org/git/20080211113516.GB6344@coredump.intra.peff.net/
in particular to avoid triggering the linear handling from
basename-guided rename detection):
#!/bin/bash
n=$1; shift
rm -rf repo
mkdir repo && cd repo
git init -q -b main
mkdata() {
mkdir $1
for i in `seq 1 $2`; do
(sed "s/^/$i /" <../sample
echo tag: $1
) >$1/$i
done
}
mkdata initial $n
git add .
git commit -q -m initial
mkdata new $n
git add .
cd new
for i in *; do git mv $i $i.renamed; done
cd ..
git rm -q -rf initial
git commit -q -m new
time git diff-tree -M -l0 --summary HEAD^ HEAD
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 89973554b5 (diffcore-rename: make diff-tree -l0 mean
-l<large>, 2017-11-29), -l0 was given a special magical "large" value,
but one which was not large enough for some uses (as can be seen from
commit 9f7e4bfa3b (diff: remove silent clamp of renameLimit,
2017-11-13). Make 0 (or a negative value) be treated as unlimited
instead and update the documentation to mention this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few places in the docs implied that rename/copy detection is always
quadratic or that all (unpaired) files were involved in the quadratic
portion of rename/copy detection. The following two commits each
introduced an exception to this:
9027f53cb5 (Do linear-time/space rename logic for exact renames,
2007-10-25)
bd24aa2f97 (diffcore-rename: guide inexact rename detection based
on basenames, 2021-02-14)
(As a side note, for copy detection, the basename guided inexact rename
detection is turned off and the exact renames will only result in
sources (without the dests) being removed from the set of files used in
quadratic detection. So, for copy detection, the documentation was
closer to correct.)
Avoid implying that all files involved in rename/copy detection are
subject to the full quadratic algorithm. While at it, also note the
default values for all these settings.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The warning when quadratic rename detection was skipped referred to
"inexact rename detection". For years, the only linear portion of
rename detection was looking for exact renames, so "inexact rename
detection" was an accurate way to refer to the quadratic portion of
rename detection. However, that changed with commit bd24aa2f97
(diffcore-rename: guide inexact rename detection based on basenames,
2021-02-14). Let's instead use the term "exhaustive rename detection"
to refer to the quadratic portion.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default reason stored in the lock file, "added with --lock",
is unlikely to be what the user would have given in a separate
`git worktree lock` command. Allowing `--reason` to be specified
along with `--lock` when adding a working tree gives the user control
over the reason for locking without needing a second command.
Signed-off-by: Stephen Manz <smanz@alum.mit.edu>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a full hexadecimal hash is given as a --negotiation-tip to "git
fetch", and that hash does not correspond to an object, "git fetch" will
segfault if --negotiate-only is given and will silently ignore that hash
otherwise. Make these cases fatal errors, just like the case when an
invalid ref name or abbreviated hash is given.
While at it, mark the error messages as translatable.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 477673d6f3 ("send-pack: support push negotiation", 2021-05-05)
did not test the case in which a remote advertises at least one ref. In
such a case, "remote_refs" in get_commons_through_negotiation() in
send-pack.c would also contain those refs with a zero ref->new_oid (in
addition to the refs being pushed with a nonzero ref->new_oid). Passing
them as negotiation tips to "git fetch" causes an error, so filter them
out.
(The exact error that would happen in "git fetch" in this case is a
segmentation fault, which is unwanted. This will be fixed in the
subsequent commit.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 477673d6f3 ("send-pack: support push negotiation", 2021-05-05)
introduced the push.negotiate config variable and included a test. The
test only covered pushing without a remote helper, so the fact that
pushing with a remote helper doesn't work went unnoticed.
This is ultimately caused by the "url" field not being set in the args
struct. This field being unset probably went unnoticed because besides
push negotiation, this field is only used to generate a "pushee" line in
a push cert (and if not given, no such line is generated). Therefore,
set this field.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During a run of the `check-whitespace` we want to verify that the
commits introduced in the Pull Request have no whitespace issues. We
only want to look at those commits, not the upstream commits (because
the contributor cannot do anything about the latter).
However, by using the `-<count>` form in `git log --check`, we run the
risk of looking at the wrong commits. The reason is that the
`actions/checkout` step does _not_ check out the tip commit of the Pull
Request's branch: Instead, it checks out a merge commit that merges that
branch into the target branch. For that reason, we already adjust the
commit count by incrementing it, but that is not enough: if the upstream
branch has newer commits, they are traversed _first_. And obviously we
will then miss some of the commits that we _actually_ wanted to look at.
Therefore, let's be careful to stop assuming a linear, up to date commit
topology in the contributed commits, and instead specify the correct
commit range.
Unfortunately, this means that we no longer can rely on a shallow clone:
There is no way of knowing just how many commits the upstream branch
advanced after the commit from which the PR branch branched off. So
let's just go with a full clone instead, and be safe rather than sorry
(if we have "too shallow" a situation, a commit range `@{u}..` may very
well include a shallow commit itself, and the output of `git show
--check <shallow>` is _not_ pretty).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of some recent security tightening, GitHub introduced the
ability to configure GitHub workflows to be run with a read-only token.
This is much more secure, in particular when working in a public
repository: While the regular read/write token might be restricted to
writing to the current branch, it is not necessarily restricted to
access only the current Pull Request.
However, the `check-whitespace` workflow threw a wrench into this plan:
it _requires_ write access (because it wants to add a PR comment in case
of a whitespace issue).
Let's just skip that PR comment. The user can always click through to
the actual error, even if it is slightly less convenient.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous changes did the necessary improvements to unpack-trees.c and
diff-lib.c in order to modify a sparse index based on its comparision
with a tree. The only remaining work is to remove some
ensure_full_index() calls and add tests that verify that the index is
not expanded in our interesting cases. Include 'switch' and 'restore' in
these tests, as they share a base implementation with 'checkout'.
Here are the relevant performance results from
p2000-sparse-operations.sh:
Test HEAD~1 HEAD
--------------------------------------------------------------------------------
2000.18: git checkout -f - (full-v3) 0.49(0.43+0.03) 0.47(0.39+0.05) -4.1%
2000.19: git checkout -f - (full-v4) 0.45(0.37+0.06) 0.42(0.37+0.05) -6.7%
2000.20: git checkout -f - (sparse-v3) 0.76(0.71+0.07) 0.04(0.03+0.04) -94.7%
2000.21: git checkout -f - (sparse-v4) 0.75(0.72+0.04) 0.05(0.06+0.04) -93.3%
It is important to compare the full index case to the sparse index case,
as the previous results for the sparse index were inflated by the index
expansion. For index v4, this is an 88% improvement.
On an internal repository with over two million paths at HEAD and a
sparse-checkout definition containing ~60,000 of those paths, 'git
checkout' went from 3.5s to 297ms with this change. The theoretical
optimum where only those ~60,000 paths exist was 275ms, so the extra
sparse directory entries contribute a 22ms overhead.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When some commands run with command_requires_full_index=1, then the
index can get in a state where the in-memory cache tree is actually
equal to the sparse index's cache tree instead of the full one.
This results in incorrect entry_count values. By clearing the cache
tree before converting to sparse, we avoid this issue.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update 'git commit' to allow using the sparse-index in memory without
expanding to a full one. The only place that had an ensure_full_index()
call was in cache_tree_update(). The recursive algorithm for
update_one() was already updated in 2de37c536 (cache-tree: integrate
with sparse directory entries, 2021-03-03) to handle sparse directory
entries in the index.
Most of this change involves testing different command-line options that
allow specifying which on-disk changes should be included in the commit.
This includes no options (only take currently-staged changes), -a (take
all tracked changes), and --include (take a list of specific changes).
To simplify testing that these options do not expand the index, update
the test that previously verified that 'git status' does not expand the
index with a helper method, ensure_not_expanded().
This allows 'git commit' to operate much faster when the sparse-checkout
cone is much smaller than the full list of files at HEAD.
Here are the relevant lines from p2000-sparse-operations.sh:
Test HEAD~1 HEAD
----------------------------------------------------------------------------------
2000.14: git commit -a -m A (full-v3) 0.35(0.26+0.06) 0.36(0.28+0.07) +2.9%
2000.15: git commit -a -m A (full-v4) 0.32(0.26+0.05) 0.34(0.28+0.06) +6.3%
2000.16: git commit -a -m A (sparse-v3) 0.63(0.59+0.06) 0.04(0.05+0.05) -93.7%
2000.17: git commit -a -m A (sparse-v4) 0.64(0.59+0.08) 0.04(0.04+0.04) -93.8%
It is important to compare the full-index case to the sparse-index case,
so the improvement for index version v4 is actually an 88% improvement in
this synthetic example.
In a real repository with over two million files at HEAD and 60,000
files in the sparse-checkout definition, the time for 'git commit -a'
went from 2.61 seconds to 134ms. I compared this to the result if the
index only contained the paths in the sparse-checkout definition and
found the theoretical optimum to be 120ms, so the out-of-cone paths only
add a 12% overhead.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By using shorter names for the test repos, we will get a slightly more
compressed performance summary without comprimising clarity.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we increase our list of commands to test in
p2000-sparse-operations.sh, we will want to have a slightly smaller test
repository. Reduce the size by a factor of four by reducing the depth of
the step that creates a big index around a moderately-sized repository.
Also add a step to run 'git checkout -' on repeat. This requires having
a previous location in the reflog, so add that to the initialization
steps.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several situations where a repository with sparse-checkout
enabled will act differently than a normal repository, and in ways that
are not intentional. The test t1092-sparse-checkout-compatibility.sh
documents some of these deviations, but a casual reader might think
these are intentional behavior changes.
Add comments on these tests that make it clear that these behaviors
should be updated. Using 'NEEDSWORK' helps contributors find that these
are potential areas for improvement.
Helped-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we need to expand a sparse-index into a full one, then the FS Monitor
bitmap is going to be incorrect. Ensure that we start fresh at such an
event.
While this is currently a performance drawback, the eventual hope of the
sparse-index feature is that these expansions will be rare and hence we
will be able to keep the FS Monitor data accurate across multiple Git
commands.
These tests are added to demonstrate that the behavior is the same
across a full index and a sparse index, but also that file modifications
to a tracked directory outside of the sparse cone will trigger
ensure_full_index().
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is difficult, but possible, to get into a state where we intend to
add a directory that is outside of the sparse-checkout definition. Add a
test to t1092-sparse-checkout-compatibility.sh that demonstrates this
using a combination of 'git reset --mixed' and 'git checkout --orphan'.
This test failed before because the output of 'git status
--porcelain=v2' would not match on the lines for folder1/:
* The sparse-checkout repo (with a full index) would output each path
name that is intended to be added.
* The sparse-index repo would only output that "folder1/" is staged for
addition.
The status should report the full list of files to be added, and so this
sparse-directory entry should be expanded to a full list when reaching
it inside the wt_status_collect_changes_initial() method. Use
read_tree_at() to assist.
Somehow, this loop over the cache entries was not guarded by
ensure_full_index() as intended.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By testing 'git -c core.fsmonitor= status -uno', we can check for the
simplest index operations that can be made sparse-aware. The necessary
implementation details are already integrated with sparse-checkout, so
modify command_requires_full_index to be zero for cmd_status().
In refresh_index(), we loop through the index entries to refresh their
stat() information. However, sparse directories have no stat()
information to populate. Ignore these entries.
This allows 'git status' to no longer expand a sparse index to a full
one. This is further tested by dropping the "-uno" option and adding an
untracked file into the worktree.
The performance test p2000-sparse-checkout-operations.sh demonstrates
these improvements:
Test HEAD~1 HEAD
-----------------------------------------------------------------------------
2000.2: git status (full-index-v3) 0.31(0.30+0.05) 0.31(0.29+0.06) +0.0%
2000.3: git status (full-index-v4) 0.31(0.29+0.07) 0.34(0.30+0.08) +9.7%
2000.4: git status (sparse-index-v3) 2.35(2.28+0.10) 0.04(0.04+0.05) -98.3%
2000.5: git status (sparse-index-v4) 2.35(2.24+0.15) 0.05(0.04+0.06) -97.9%
Note that since HEAD~1 was expanding the sparse index by parsing trees,
it was artificially slower than the full index case. Thus, the 98%
improvement is misleading, and instead we should celebrate the 0.34s to
0.05s improvement of 85%. This is more indicative of the peformance
gains we are expecting by using a sparse index.
Note: we are dropping the assignment of core.fsmonitor here. This is not
necessary for the test script as we are not altering the config any
other way. Correct integration with FS Monitor will be validated in
later changes.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git status' began reporting a percentage of populated paths when
sparse-checkout is enabled in 051df3cf (wt-status: show sparse
checkout status as well, 2020-07-18). This percentage is incorrect when
the index has sparse directories. It would also be expensive to
calculate as we would need to parse trees to count the total number of
possible paths.
Avoid the expensive computation by simplifying the output to only report
that a sparse checkout exists, without the percentage.
This change is the reason we use 'git status --porcelain=v2' in
t1092-sparse-checkout-compatibility.sh. We don't want to ensure that
this message is equal across both modes, but instead just the important
information about staged, modified, and untracked files are compared.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While comparing an index to a tree, we may see a sparse directory entry.
In this case, we should compare that portion of the tree to the tree
represented by that entry. This could include a new tree which needs to
be expanded to a full list of added files. It could also include an
existing tree, in which case all of the changes inside are important to
describe, including the modifications, additions, and deletions. Note
that the case where the tree has a path and the index does not remains
identical to before: the lack of a cache entry is the same with a sparse
index.
Use diff_tree_oid() appropriately to compute the diff.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have sparse directory entries in the index, we want to compare
that directory against sparse-checkout patterns. Those pattern matching
algorithms are built expecting a file path, not a directory path. This
is especially important in the "cone mode" patterns which will match
files that exist within the "parent directories" as well as the
recursive directory matches.
If path_matches_pattern_list() is given a directory, we can add a fake
filename ("-") to the directory and get the same results as before,
assuming we are in cone mode. Since sparse index requires cone mode
patterns, this is an acceptable assumption.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During unpack_callback(), index entries are compared against tree
entries. These are matched according to names and types. One goal is to
decide if we should recurse into subtrees or simply operate on one index
entry.
In the case of a sparse-directory entry, we do not want to recurse into
that subtree and instead simply compare the trees. In some cases, we
might want to perform a merge operation on the entry, such as during
'git checkout <commit>' which wants to replace a sparse tree entry with
the tree for that path at the target commit. We extend the logic within
unpack_single_entry() to create a sparse-directory entry in this case,
and then that is sent to call_unpack_fn().
There are some subtleties in this process. For instance, we need to
update find_cache_entry() to allow finding a sparse-directory entry that
exactly matches a given path. Use the new helper method
sparse_dir_matches_path() for this. We also need to ignore conflict
markers in the case that the entries correspond to directories and we
already have a sparse directory entry.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next change, we will use this method to unpack a sparse directory
entry, so change the name to unpack_single_entry() so these entries
apply. The new name reflects that we will not recurse into trees in
order to resolve the conflicts.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we further integrate the sparse-index into unpack-trees, we need to
ensure that we compare sparse directory entries correctly with other
entries. This affects searching for an exact path as well as sorting
index entries.
Sparse directory entries contain the trailing directory separator. This
is important for the sorting, in particular. Thus, within
do_compare_entry() we stop using S_IFREG in all cases, since sparse
directories should use S_IFDIR to indicate that the comparison should
treat the entry name as a dirctory.
Within compare_entry(), it first calls do_compare_entry() to check the
leading portion of the name. When the input path is a directory name, we
could match exactly already. Thus, we should return 0 if we have an
exact string match on a sparse directory entry. The final check is a
length comparison between the strings.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The cache_bottom member of 'struct unpack_trees_options' is used to
track the range of index entries corresponding to a node of the cache
tree. While recursing with traverse_by_cache_tree(), this value is
preserved on the call stack using a local and then restored as that
method returns.
The mark_ce_used() method normally modifies the cache_bottom member when
it refers to the marked cache entry. However, sparse directory entries
are stored as nodes in the cache-tree data structure as of 2de37c53
(cache-tree: integrate with sparse directory entries, 2021-03-30). Thus,
the cache_bottom will be modified as the cache-tree walk advances. Do
not update it as well within mark_ce_used().
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before moving to update 'git status' and 'git add' to work with sparse
indexes, add an explicit test that ensures the sparse-index works the
same as a normal sparse-checkout when the worktree contains directories
and files outside of the sparse cone.
Specifically, 'folder1/a' is a file in our test repo, but 'folder1' is
not in the sparse cone. When 'folder1/a' is modified, the file is not
shown as modified and adding it will fail. This is new behavior as of
a20f704 (add: warn when asked to update SKIP_WORKTREE entries,
2021-04-08). Before that change, these adds would be silently ignored.
Untracked files are fine: adding new files both with 'git add .' and
'git add folder1/' works just as in a full checkout. This may not be
entirely desirable, but we are not intending to change behavior at the
moment, only document it. A future change could alter the behavior to
be more sensible, and this test could be modified to satisfy the new
expected behavior.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As more features integrate with the sparse-index feature, more and more
special cases arise that require different data shapes within the tree
structure of the repository in order to demonstrate those cases.
Add several interesting special cases all at once instead of sprinkling
them across several commits. The interesting cases being added here are:
* Add sparse-directory entries on both sides of directories within the
sparse-checkout definition.
* Add directories outside the sparse-checkout definition who have only
one entry and are the first entry of a directory with multiple
entries.
* Add filenames adjacent to a sparse directory entry that sort before
and after the trailing slash.
Later tests will take advantage of these shapes, but they also deepen
the tests that already exist.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the test data shape to be as expected, allowing rename
detection to work properly now that the 'larger-content' file actually
has meaningful lines.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a full index from a sparse one, we create cache entries
for every blob within a given sparse directory entry. These are
correctly marked with the CE_SKIP_WORKTREE flag, but the CE_EXTENDED
flag is not included. The CE_EXTENDED flag would exist if we loaded a
full index from disk with these entries marked with CE_SKIP_WORKTREE, so
we can add the flag here to be consistent. This allows us to directly
compare the flags present in cache entries when testing the sparse-index
feature, but has no significance to its correctness in the user-facing
functionality.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-index format is designed to be compatible with merge
conflicts, even those outside the sparse-checkout definition. The reason
is that when converting a full index to a sparse one, a cache entry with
nonzero stage will not be collapsed into a sparse directory entry.
However, this behavior was not tested, and a different behavior within
convert_to_sparse() fails in this scenario. Specifically,
cache_tree_update() will fail when unmerged entries exist.
convert_to_sparse_rec() uses the cache-tree data to recursively walk the
tree structure, but also to compute the OIDs used in the
sparse-directory entries.
Add an index scan to convert_to_sparse() that will detect if these merge
conflict entries exist and skip the conversion before trying to update
the cache-tree. This is marked as NEEDSWORK because this can be removed
with a suitable update to cache_tree_update() or a similar method that
can construct a cache-tree with invalid nodes, but still allow creating
the nodes necessary for creating sparse directory entries.
It is possible that in the future we will not need to make such an
update, since if we do not expand a sparse-index into a full one, this
conversion does not need to happen. Thus, this can be deferred until the
merge machinery is made to integrate with the sparse-index.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Occasionally we receive reviews after patches were integrated, where
`sparse` (https://sparse.docs.kernel.org/en/latest/ has more information
on that project) identified problems such as file-local variables or
functions being declared as global.
By running `sparse` as part of our Continuous Integration, we can catch
such things much earlier. Even better: developers who activated GitHub
Actions on their forks can catch such issues before even sending their
patches to the Git mailing list.
This addresses https://github.com/gitgitgadget/git/issues/345
Note: Not even Ubuntu 20.04 ships with a new enough version of `sparse`
to accommodate Git's needs. The symptom looks like this:
add-interactive.c:537:51: error: Using plain integer as NULL pointer
To counter that, we download and install the custom-built `sparse`
package from the Azure Pipeline that we specifically created to address
this issue.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 88473c8bae ("load_ref_decorations(): avoid parsing non-tag
objects", 2021-06-22) introduced a shortcut to `add_ref_decoration()`:
Rather than calling `parse_object()`, we go for `oid_object_info()` and
then `lookup_object_by_type()` using the type just discovered. As
detailed in the commit message, this provides a significant time saving.
Unfortunately, it also changes the behavior: We lose all annotated tags
from the decoration.
The reason this happens is in the loop where we try to peel the tags, we
won't necessarily have parsed that first object. If we haven't, its
`tagged` field will be NULL, so we won't actually add a decoration for
the pointed-to object.
Make sure to parse the tag object at the top of the peeling loop. This
effectively restores the pre-88473c8bae parsing -- but only of tags,
allowing us to keep most of the possible speedup from 88473c8bae.
On my big ~220k ref test case (where it's mostly non-tags), the
timings [using "git log -1 --decorate"] are:
- before either patch: 2.945s
- with my broken patch: 0.707s
- with [this patch]: 0.788s
The simplest way to do this is to just conditionally parse before the
loop:
if (obj->type == OBJ_TAG)
parse_object(&obj->oid);
But we can observe that our tag-peeling loop needs to peel already, to
examine recursive tags-of-tags. So instead of introducing a new call to
parse_object(), we can simply move the parsing higher in the loop:
instead of parsing the new object before we loop, parse each tag object
before we look at its "tagged" field.
This has another beneficial side effect: if a tag points at a commit (or
other non-tag type), we do not bother to parse the commit at all now.
And we know it is a commit without calling oid_object_info(), because
parsing the surrounding tag object will have created the correct in-core
object based on the "type" field of the tag.
Our test coverage for --decorate was obviously not good, since we missed
this quite-basic regression. The new tests covers an annotated tag
(showing the fix), but also that we correctly show annotations for
lightweight tags and double-annotated tag-of-tags.
Reported-by: Martin Ågren <martin.agren@gmail.com>
Helped-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- default lock string, "added with --lock"
- temporary lock string, "initializing"
Signed-off-by: Stephen Manz <smanz@alum.mit.edu>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- remove unneeded `git rev-parse` which must have come from a copy-paste
of another test
- unlock the worktree with test_when_finished
Signed-off-by: Stephen Manz <smanz@alum.mit.edu>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep --and -e foo" ought to have been diagnosed as an error
but instead segfaulted, which has been corrected.
* rs/grep-parser-fix:
grep: report missing left operand of --and
The "union" conflict resolution variant misbehaved when used with
binary merge driver.
* jk/union-merge-binary:
ll_union_merge(): rename path_unused parameter
ll_union_merge(): pass name labels to ll_xdl_merge()
ll_binary_merge(): handle XDL_MERGE_FAVOR_UNION
Various updates to tests around "git describe"
* ab/describe-tests-fix:
describe tests: support -C in "check_describe"
describe tests: fix nested "test_expect_success" call
describe tests: don't rely on err.actual from "check_describe"
describe tests: refactor away from glob matching
describe tests: improve test for --work-tree & --dirty
Rewrite the backend for "diff -G/-S" to use pcre2 engine when
available.
* ab/pickaxe-pcre2: (22 commits)
xdiff-interface: replace discard_hunk_line() with a flag
xdiff users: use designated initializers for out_line
pickaxe -G: don't special-case create/delete
pickaxe -G: terminate early on matching lines
xdiff-interface: allow early return from xdiff_emit_line_fn
xdiff-interface: prepare for allowing early return
pickaxe -S: slightly optimize contains()
pickaxe: rename variables in has_changes() for brevity
pickaxe -S: support content with NULs under --pickaxe-regex
pickaxe: assert that we must have a needle under -G or -S
pickaxe: refactor function selection in diffcore-pickaxe()
perf: add performance test for pickaxe
pickaxe/style: consolidate declarations and assignments
diff.h: move pickaxe fields together again
pickaxe: die when --find-object and --pickaxe-all are combined
pickaxe: die when -G and --pickaxe-regex are combined
pickaxe tests: add missing test for --no-pickaxe-regex being an error
pickaxe tests: test for -G, -S and --find-object incompatibility
pickaxe tests: add test for "log -S" not being a regex
pickaxe tests: add test for diffgrep_consume() internals
...
Preliminary clean-up of tests before the main reftable changes
hits the codebase.
* hn/prep-tests-for-reftable: (22 commits)
t1415: set REFFILES for test specific to storage format
t4202: mark bogus head hash test with REFFILES
t7003: check reflog existence only for REFFILES
t7900: stop checking for loose refs
t1404: mark tests that muck with .git directly as REFFILES.
t2017: mark --orphan/logAllRefUpdates=false test as REFFILES
t1414: mark corruption test with REFFILES
t1407: require REFFILES for for_each_reflog test
test-lib: provide test prereq REFFILES
t5304: use "reflog expire --all" to clear the reflog
t5304: restyle: trim empty lines, drop ':' before >
t7003: use rev-parse rather than FS inspection
t5000: inspect HEAD using git-rev-parse
t5000: reformat indentation to the latest fashion
t1301: fix typo in error message
t1413: use tar to save and restore entire .git directory
t1401-symbolic-ref: avoid direct filesystem access
t1401: use tar to snapshot and restore repo state
t5601: read HEAD using rev-parse
t9300: check ref existence using test-helper rather than a file system check
...
Some more code and doc clarification around "git push".
* fc/push-simple-updates-cleanup:
push: don't get a full remote object
push: only check same_remote when needed
push: remove trivial function
push: remove redundant check
push: factor out the typical case
push: get rid of all the setup_push_* functions
push: trivial simplifications
push: make setup_push_* return the dst
push: only get the branch when needed
push: factor out null branch check
push: split switch cases
push: return immediately in trivial switch case
push: create new get_upstream_ref() helper
"git cat-file --batch-all-objects"" misbehaved when "--batch" is in
use and did not ask for certain object traits.
* zh/cat-file-batch-fix:
cat-file: merge two block into one
cat-file: handle trivial --batch format with --batch-all-objects
Add the missing __attribute__((format)) checking to
advise_if_enabled(). This revealed a trivial issue introduced in
b3b18d1621 (advice: revamp advise API, 2020-03-02). We treated the
argv[1] as a format string, but did not intend to do so. Let's use
"%s" and pass argv[1] as an argument instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing format attributes to API functions that take printf
arguments.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing __attribute__((format)) function attributes to various
"static" functions that take printf arguments.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git diff --merge-base` was introduced at around Git 2.30, the
documentation included a few errors.
In the example given for `git diff --cached --merge-base`, the
`--cached` flag was omitted for the `--merge-base` example. Add the
missing flag.
In the `git diff <commit>` case, we failed to mention that
`--merge-base` is an available option. Give the usage of `--merge-base`
as an option there.
Finally, there are two errors in the usage of `git diff`. Firstly, we do
not mention `--merge-base` in the `git diff --cached` case. Mention it
so that it's consistent with the documentation. Secondly, we put the
`[--merge-base]` in between `<commit>` and `[<commit>...]`. Move the
`[--merge-base]` so that it's beside `[<options>]` which is a more
logical grouping.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the reflog_message() function added in
96e832a5fd (sequencer (rebase -i): refactor setting the reflog
message, 2017-01-02), it gained another user in
9055e401dd (sequencer: introduce new commands to reset the revision,
2018-04-25). Let's move it around and remove the forward declaration
added in the latter commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9cf6d3357a (Add git-index-pack utility, 2005-10-12) and
466dbc42f5 (receive-pack: Send internal errors over side-band #2,
2010-02-10) we added these static functions and forward-declared their
__attribute__((printf)).
I think this may have been to work around some compiler limitation at
the time, but in any case we have a lot of code that uses the briefer
way of declaring these that I'm using here, so if we had any such
issues with compilers we'd have seen them already.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's add a new "add-clone" subcommand to `git submodule--helper` with
the goal of converting part of the shell code in git-submodule.sh
related to `git submodule add` into C code. This new subcommand clones
the repository that is to be added, and checks out to the appropriate
branch.
This is meant to be a faithful conversion that leaves the behaviour of
'cmd_add()' script unchanged.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Based-on-patch-by: Shourya Shukla <periperidip@gmail.com>
Based-on-patch-by: Prathamesh Chavan <pc44800@gmail.com>
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Separate out the core logic of module_clone() from the flag
parsing---this way we can call the equivalent of the `submodule--helper
clone` subcommand directly within C, without needing to push arguments
in a strvec.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The standard `die()` function that is used in C code prefixes all the
messages passed to it with 'fatal: '. This does not happen with the
`die` used in 'git-submodule.sh'.
Let's prefix each of the shell die messages with 'fatal: ' so that when
they are converted to C code, the error messages stay the same as before
the conversion.
Note that the shell version of `die` exits with error code 1, while the
C version exits with error code 128. In practice, this does not change
any behaviour, as no functionality in 'submodule add' and 'submodule
update' relies on the value of the exit code.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In general, we encourage users to use plumbing commands, like git
rev-list, over porcelain commands, like git log, when scripting.
However, git rev-list has one glaring problem that prevents it from
being used in certain cases: when --pretty is used with a custom format,
it always prints out a line containing "commit" and the object ID. This
makes it unsuitable for many scripting needs, and forces users to use
git log instead.
While we can't change this behavior for backwards compatibility, we can
add an option to suppress this behavior, so let's do so, and call it
"--no-commit-header". Additionally, add the corresponding positive
option to switch it back on.
Note that this option doesn't affect the built-in formats, only custom
formats. This is exactly the same behavior as users already have from
git log and is what most users will be used to.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even when the `--allow-empty-message` option is given, "git commit"
offers an interactive editor session with prefilled message that says
the commit will be aborted if the buffer is emptied, which is wrong.
Remove the "an empty message aborts" part from the message when the
option is given to fix it.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Helped-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Hu Jialun <hujialun@comp.nus.edu.sg>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Strings of hint messages inserted into editor on interactive commit was
scattered in-line, rendering the code harder to understand at first
glance.
Extract those messages out into separate variables to make the code
outline easier to follow.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Hu Jialun <hujialun@comp.nus.edu.sg>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a segfault in the --stdin-packs option added in
339bce27f4 (builtin/pack-objects.c: add '--stdin-packs' option,
2021-02-22).
The read_packs_list_from_stdin() function didn't check that the lines
it was reading were valid packs, and thus when doing the QSORT() with
pack_mtime_cmp() we'd have a NULL "util" field. The "util" field is
used to associate the names of included/excluded packs with the
packed_git structs they correspond to.
The logic error was in assuming that we could iterate all packs and
annotate the excluded and included packs we got, as opposed to
checking the lines we got on stdin. There was a check for excluded
packs, but included packs were simply assumed to be valid.
As noted in the test we'll not report the first bad line, but whatever
line sorted first according to the string-list.c API. In this case I
think that's fine. There was further discussion of alternate
approaches in [1].
Even though we're being lazy let's assert the line we do expect to get
in the test, since whoever changes this code in the future might miss
this case, and would want to update the test and comments.
1. http://lore.kernel.org/git/YND3h2l10PlnSNGJ@nand.local
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 0181b600a6 (pkt-line: define PACKET_READ_RESPONSE_END, 2020-05-19),
the Response End packet was defined for Git's network protocol. When the
patch was sent, it included an oversight where the error messages
referenced "stateless separator", the work-in-progress name, over
"response end", the final name chosen.
Correct these error messages by having them correctly reference
a "response end" packet.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrei pointed out a typo in the Swedish translation, where a config
variable name had been copied incorrectly.
By introducing typo detection function in "git-po-helper", more typos
were found. All easy-to-fix typos were fixed in this commit.
Reported-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
When we cannot figure out how wide the terminal is, we use a
fallback value of 80 ourselves (which cannot be avoided), but when
we run the pager, we export it in COLUMNS, which forces the pager
to use the hardcoded value, even when the pager is perfectly
capable to figure it out itself. Stop exporting COLUMNS when we
fall back on the hardcoded default value for our own use.
* js/stop-exporting-bogus-columns:
pager: avoid setting COLUMNS when we're guessing its value
On Windows, mergetool has been taught to find kdiff3.exe just like
it finds winmerge.exe.
* ms/mergetools-kdiff3-on-windows:
mergetools/kdiff3: make kdiff3 work on Windows too
Output from some of our tests were affected by the width of the
terminal that they were run in, which has been corrected by
exporting a fixed value in the COLUMNS environment.
* ab/fix-columns-to-80-during-tests:
test-lib.sh: set COLUMNS=80 for --verbose repeatability
Recent update to completion script (in contrib/) broke those who
use the __git_complete helper to define completion to their custom
command.
* fw/complete-cmd-idx-fix:
completion: bash: fix late declaration of __git_cmd_idx
Some test scripts assumed that readlink(1) was universally
installed and available, which is not the case.
* jk/test-without-readlink-1:
t: use portable wrapper for readlink(1)
The side-band demultiplexer that is used to display progress output
from the remote end did not clear the line properly when the end of
line hits at a packet boundary, which has been corrected. Also
comes with test clean-ups.
* jx/sideband-cleanup:
test: refactor to use "get_abbrev_oid" to get abbrev oid
test: refactor to use "test_commit" to create commits
test: compare raw output, not mangle tabs and spaces
sideband: don't lose clear-to-eol at packet boundary
We broke "GIT_SKIP_TESTS=t?000" to skip certain tests in recent
update, which got fixed.
* jk/test-avoid-globmatch-with-skip-patterns:
test-lib: avoid accidental globbing in match_pattern_list()
Work around inefficient glob substitution in older versions of bash
by rewriting parts of a test.
* jx/t6020-with-older-bash:
t6020: fix incompatible parameter expansion
Make the codebase MSAN clean.
* ah/uninitialized-reads-fix:
builtin/checkout--worker: zero-initialise struct to avoid MSAN complaints
split-index: use oideq instead of memcmp to compare object_id's
bulk-checkin: make buffer reuse more obvious and safer
Update "git subtree" to work better on Windows.
* js/subtree-on-windows-fix:
subtree: fix assumption about the directory separator
subtree: fix the GIT_EXEC_PATH sanity check to work on Windows
"git-svn" tests assumed that "locale -a", which is used to pick an
available UTF-8 locale, is available everywhere. A knob has been
introduced to allow testers to specify a suitable locale to use.
* dd/svn-test-wo-locale-a:
t: use user-specified utf-8 locale for testing svn
The command line completion (in contrib/) learned that "git diff"
takes the "--anchored" option.
* tb/complete-diff-anchored:
completion: add --anchored to diff's options
The recent --negotiate-only option would segfault in the call to
oid_array_for_each() in negotiate_using_fetch() unless one or more
--negotiation-tip=* options were provided.
All of the other tests for the feature combine both, but nothing was
checking this assumption, let's do that and add a test for it. Fixes a
bug in 9c1e657a8f (fetch: teach independent negotiation (no
packfile), 2021-05-04).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This saves 8K per `struct object_directory', meaning it saves
around 800MB in my case involving 100K alternates (half or more
of those alternates are unlikely to hold loose objects).
This is implemented in two parts: a generic, allocation-free
`cbtree' and the `oidtree' wrapper on top of it. The latter
provides allocation using alloc_state as a memory pool to
improve locality and reduce free(3) overhead.
Unlike oid-array, the crit-bit tree does not require sorting.
Performance is bound by the key length, for oidtree that is
fixed at sizeof(struct object_id). There's no need to have
256 oidtrees to mitigate the O(n log n) overhead like we did
with oid-array.
Being a prefix trie, it is natively suited for expanding short
object IDs via prefix-limited iteration in
`find_short_object_filename'.
On my busy workstation, p4205 performance seems to be roughly
unchanged (+/-8%). Startup with 100K total alternates with no
loose objects seems around 10-20% faster on a hot cache.
(800MB in memory savings means more memory for the kernel FS
cache).
The generic cbtree implementation does impose some extra
overhead for oidtree in that it uses memcmp(3) on
"struct object_id" so it wastes cycles comparing 12 extra bytes
on SHA-1 repositories. I've not yet explored reducing this
overhead, but I expect there are many places in our code base
where we'd want to investigate this.
More information on crit-bit trees: https://cr.yp.to/critbit.html
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with `oidcpy', the source struct will not be modified and
this will allow an upcoming const-correct caller to use it.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no point in using 8 bits per-directory when 1 bit
will do. This saves us 224 bytes per object directory, which
ends up being 22MB when dealing with 100K alternates.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can save a few milliseconds (across 100K odbs) by using
strbuf_addbuf() instead of strbuf_addstr() by passing `entry' as
a strbuf pointer rather than a "const char *".
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With many alternates, the duplicate check in alt_odb_usable()
wastes many cycles doing repeated fspathcmp() on every existing
alternate. Use a khash to speed up lookups by odb->path.
Since the kh_put_* API uses the supplied key without
duplicating it, we also take advantage of it to replace both
xstrdup() and strbuf_release() in link_alt_odb_entry() with
strbuf_detach() to avoid the allocation and copy.
In a test repository with 50K alternates and each of those 50K
alternates having one alternate each (for a total of 100K total
alternates); this speeds up lookup of a non-existent blob from
over 16 minutes to roughly 2.7 seconds on my busy workstation.
Note: all underlying git object directories were small and
unpacked with only loose objects and no packs. Having to load
packs increases times significantly.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When looking for things that hardcoded a non-zero "hint" parameter to
strbuf_fread() I discovered that since f2561fda36 (Add git-imap-send,
derived from isync 1.0.1., 2006-03-10) we've been passing a hardcoded
4096 in imap-send.c to read stdin.
Since we're not doing anything unusual here let's use a less verbose
pattern used in a lot of other places (the hint of "0" will default to
8192). We don't need to take a FILE * here either, so we can use "0"
instead of "stdin". While we're at it improve the error message if we
can't read the input to use error_errno().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test to ensure failure on adding a submodule to a directory with
tracked contents in the index.
As we are going to refactor and port to C some parts of `git submodule
add`, let's add a test to help ensure no regression is introduced.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Based-on-patch-by: Shourya Shukla <periperidip@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current documentation reads as if .gitignore files will be parsed in
every parent directory, and not until they reach a repository boundary.
This clarifies the current behaviour.
As well, this corrects 'toplevel' to 'top-level', matching usage for
'top-level domain'.
Signed-off-by: Andrew Berry <andrew@furrypaws.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on the chosen format of help pages, git-help uses function
show_man_page, show_info_page, or show_html_page. The first thing all
three functions do is to convert given `git_cmd` to a `page` using
function cmd_to_page.
Move the common part of these three functions to function cmd_help to
avoid code duplication.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use our standard allocation functions and macros (xcalloc,
ALLOC_ARRAY, REALLOC_ARRAY) in our version of khash.h. They terminate
the program on error instead, so code that's using them doesn't have to
handle allocation failures. Make this behavior explicit by turning
kh_resize_ into a void function and removing the related unreachable
error handling code.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t6402, we're checking number of files in the index and the working
tree by piping the output of Git's command to "wc -l", thus losing the
exit status code of git.
Let's use the new helper test_stdout_line_count in order to preserve
Git's exit status code.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t6400, we're checking number of files in the index and the working
tree by piping the output of "git ls-files" to "wc -l", thus losing the
exit status code of git.
Let's use the newly introduced test_stdout_line_count in order to check
the exit status code of Git's command.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some tests, we're checking the number of lines in output of some
commands, including but not limited to Git's command.
We're doing the check by running those commands in the left side of
a pipe, thus losing the exit status code of those commands. Meanwhile,
we really want to check the exit status code of Git's command.
Let's write the output of those commands to a temporary file, and use
test_line_count separately in order to check exit status code of
those commands properly.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By upgrading from v1 to v2 of `actions/checkout`, we avoid fetching all
the tags and the complete history: v2 only fetches one revision by
default. This should make things a lot faster.
Note that `actions/checkout@v2` seems to be incompatible with running in
containers: https://github.com/actions/checkout/issues/151. Therefore,
we stick with v1 there.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already build Git for Windows with `NO_GETTEXT` when compiling with
GCC. Let's do the same with Visual C, too.
Note that we do not technically _need_ to pass `NO_GETTEXT` explicitly
in that `make artifacts-tar` invocation because we do this while `MSVC`
is set (which will set `uname_S := Windows`, which in turn will set
`NO_GETTEXT = YesPlease`). But it is definitely nicer to be explicit
here.
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Helped-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We obviously do not want to bundle `.mo` files during `make
artifacts-tar NO_GETTEXT=Yep`, but that was the case.
To fix that, go a step beyond just fixing the symptom, and simply
define the lists of `.po` and `.mo` files as empty if `NO_GETTEXT` is
set.
Helped-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's test suite is excruciatingly slow on Windows, mainly due to the
fact that it executes a lot of shell script code, and that's simply not
native to Windows.
To help with that, we established the pattern where the artifacts are
first built in one job, and then multiple test jobs run in parallel
using the artifacts built in the first job.
We take pains in transferring only the build outputs, and letting
`actions/checkout` fill in the rest of the files.
One major downside of that strategy is that the test jobs might fail to
check out the intended revision (e.g. because the branch has been
updated while the build was running, as is frequently the case with the
`seen` branch).
Let's transfer also the files tracked by Git, and skip the checkout step
in the test jobs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move away from the "struct ref_list" in bundle.c in favor of the
almost identical string-list.c API.
That API fits this use-case perfectly, but did not exist in its
current form when this code was added in 2e0afafebd (Add git-bundle:
move objects and references by archive, 2007-02-22), with hindsight we
could have used the path-list API, which later got renamed to
string-list. See 8fd2cb4069 (Extract helper bits from
c-merge-recursive work, 2006-07-25)
We need to change "name" to "string" and "oid" to "util" to make this
conversion, but other than that the APIs are pretty much identical for
what bundle.c made use of.
Let's also replace the memset(..,0,...) pattern with a more idiomatic
"INIT" macro, and finally add a *_release() function so to free the
allocated memory.
Before this the add_to_ref_list() would leak memory, now e.g. "bundle
list-heads" reports no memory leaks at all under valgrind.
In the bundle_header_init() function we're using a clever trick to
memcpy() what we'd get from the corresponding
BUNDLE_HEADER_INIT. There is a concurrent series to make use of that
pattern more generally, see [1].
1. https://lore.kernel.org/git/cover-0.5-00000000000-20210701T104855Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for moving away from accessing the OID and name via the
"oid" and "name" slots in a subsequent commit, change the code that
accesses it to use named variables. This makes the subsequent change
smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak from the prefix_filename() function introduced with
its use in 3b754eedd5 (bundle: use prefix_filename with bundle path,
2017-03-20).
As noted in that commit the leak was intentional as a part of being
sloppy about freeing resources just before we exit, I'm changing this
because I'll be fixing other memory leaks in the bundle API (including
the library version) in subsequent commits. It's easier to reason
about those fixes if valgrind runs cleanly at the end without any
leaks whatsoever.
An earlier version of this change[1] went out of its way to not leak
memory on the die() codepaths here, but doing so will only avoid
reports of potential leaks under heap-only leak trackers such as
valgrind, not the SANITIZE=leak mode.
Avoiding those leaks as well might be useful to enable us to run
cleanly under the likes of valgrind in the future. But for now the
relative verbosity of the resulting code, and the fact that we don't
have some valgrind or SANITIZE=leak mode as part of our CI (it's only
run ad-hoc, see [2]), means we're not worrying about that for now.
1. https://lore.kernel.org/git/87v95vdxrc.fsf@evledraar.gmail.com/
2. https://lore.kernel.org/git/87czsv2idy.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the TEST_OUTPUT_DIRECTORY is defined, then all test data will be
written in that directory instead of the default directory located in
"t/". While this works as expected for our normal tests, performance
tests fail to locate and aggregate performance data because they don't
know to handle TEST_OUTPUT_DIRECTORY correctly and always look at the
default location.
Fix the issue by adding a `--results-dir` parameter to "aggregate.perl"
which identifies the directory where results are and by making the "run"
script awake of the TEST_OUTPUT_DIRECTORY variable.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change all in-tree users of the string_list_init(LIST, BOOL) API to
use string_list_init_{nodup,dup}(LIST) instead.
As noted in the preceding commit let's leave the now-unused
string_list_init() wrapper in-place for any in-flight users, it can be
removed at some later date.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to use the new "memcpy() a 'blank' struct on the stack"
pattern for string_list_init(), and to make the macro initialization
consistent with the function initialization introduce two new
string_list_init_{nodup,dup}() functions. These are like the old
string_list_init() when called with a false and true second argument,
respectively.
I think this not only makes things more consistent, but also easier to
read. I often had to lookup what the ", 0)" or ", 1)" in these
invocations meant, now it's right there in the function name, and
corresponds to the macros.
A subsequent commit will convert existing API users to this pattern,
but as this is a very common API let's leave a compatibility function
in place for later removal. This intermediate state also proves that
the compatibility function works.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the dir_init() function and replace it with a DIR_INIT
macro. In many cases in the codebase we need to initialize things with
a function for good reasons, e.g. needing to call another function on
initialization. The "dir_init()" function was not one such case, and
could trivially be replaced with a more idiomatic macro initialization
pattern.
The only place where we made use of its use of memset() was in
dir_clear() itself, which resets the contents of an an existing struct
pointer. Let's use the new "memcpy() a 'blank' struct on the stack"
idiom to do that reset.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the common patter in the codebase of duplicating the
initialization logic between an *_INIT macro and a
corresponding *_init() function to use the macro as the canonical
source of truth.
Now we no longer need to keep the function up-to-date with the macro
version. This implements a suggestion by Jeff King who found that
under -O2 [1] modern compilers will init new version in place without
the extra copy[1]. The performance of a single *_init() won't matter
in most cases, but even if it does we're going to be producing
efficient machine code to perform these operations.
1. https://lore.kernel.org/git/YNyrDxUO1PlGJvCn@coredump.intra.peff.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move *_INIT macros I'll use in a subsequent commits to designated
initializers. This isn't required for those follow-up changes, but
since next commits will change things in this area, let's use the
modern pattern over the old one while we're at it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a custom match_pattern_list() function which we use for matching
test names (like "t1234") against glob-like patterns (like "t1???") for
$GIT_SKIP_TESTS, --verbose-only, etc.
Those patterns may have multiple whitespace-separated elements (e.g.,
"t0* t1234 t5?78"). The callers of match_pattern_list thus pass the
strings unquoted, so that the shell does the usual field-splitting into
separate arguments.
But this also means the shell will do the usual globbing for each
argument, which can result in us seeing an expansion based on what's in
the filesystem, rather than the real pattern. For example, if I have the
path "t5000" in the filesystem, and you feed the pattern "t?000", that
_should_ match the string "t0000", but it won't after the shell has
expanded it to "t5000".
This has been a bug ever since that function was introduced. But it
didn't usually trigger since we typically use the function inside the
trash directory, which has a very limited set of files that are unlikely
to match. It became a lot easier to trigger after edc23840b0 (test-lib:
bring $remove_trash out of retirement, 2021-05-10), because now we match
$GIT_SKIP_TESTS before even entering the trash directory. So the t5000
example above can be seen with:
GIT_SKIP_TESTS=t?000 ./t0000-basic.sh
which should skip all tests but doesn't.
We can fix this by using "set -f" to ask the shell not to glob (which is
in POSIX, so should hopefully be portable enough). We only want to do
this in a subshell (to avoid polluting the rest of the script), which
means we need to get the whole string intact into the match_pattern_list
function by quoting it. Arguably this is a good idea anyway, since it
makes it much more obvious that we intend to split, and it's not simply
sloppy scripting.
Diagnosed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was no documentation for the --negotiate-only option added in
9c1e657a8f (fetch: teach independent negotiation (no packfile),
2021-05-04), only documentation for the related push.negotiation
option added in the following commit in 477673d6f3 (send-pack:
support push negotiation, 2021-05-04).
Let's document it, and update the cross-linking I'd added between
--negotiation-tip=* and 'fetch.negotiationAlgorithm' in
526608284a (fetch doc: cross-link two new negotiation options,
2018-08-01).
I think it would be better to say "in common with the remote" here
than "...the server", but the documentation for --negotiation-tip=*
above this talks about "the server", so let's continue doing that in
this related option. See 3390e42adb (fetch-pack: support negotiation
tip whitelist, 2018-07-02) for that documentation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the early return if we have no remote refs in send_pack()
earlier.
When this was added in 4c353e890c (Warn when send-pack does nothing,
2005-12-04) one of the first things we'd do was to abort, but as of
cfee10a773 (send-pack/receive-pack: allow errors to be reported back
to pusher., 2005-12-25) we've added numerous server_supports()
conditions that are acted on later in the function, that won't be used
if we don't have remote refs.
Then as of 477673d6f3 (send-pack: support push negotiation,
2021-05-04) we started doing even more work on the assumption that we
had some remote refs to feed to --negotiation-tip=* options.
We only hit this condition if we have nothing to push, so we don't
need to consider "push.negotiate" etc. only to do nothing with that
information.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Directory rename detection can cause transitive renames, e.g. if the two
different sides of history each do one half of:
A/file -> B/file
B/ -> C/
then directory rename detection transitively renames to give us
A/file -> C/file
However, when C/ == A/, note that this gives us
A/file -> A/file.
merge-recursive assumed that any rename D -> E would have D != E. While
that is almost always true, the above is a special case where it is not.
So we cannot do things like delete the rename source, we cannot assume
that a file existing at path E implies a rename/add conflict and we have
to be careful about what stages end up in the output.
This change feels a bit hackish. It took me surprisingly many hours to
find, and given merge-recursive's design causing it to attempt to
enumerate all combinations of edge and corner cases with special code
for each combination, I'm worried there are other similar fixes needed
elsewhere if we can just come up with the right special testcase.
Perhaps an audit would rule it out, but I have not the energy.
merge-recursive deserves to die, and since it is on its way out anyway,
fixing this particular bug narrowly will have to be good enough.
Reported-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Path conflicts (typically rename path conflicts, e.g.
rename/rename(1to2) or rename/add/delete), and directory/file conflicts
should obviously result in files not being marked as clean in the merge.
We had a codepath where we missed consulting the path_conflict and
df_conflict flags, based on match_mask. Granted, it requires an unusual
setup to trigger this codepath (directory rename causing rename-to-self
is the only case I can think of), but we still need to handle it. To
make it clear that we have audited the other codepaths that do not
explicitly mention these flags, add some assertions that the flags are
not set.
Reported-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Directory rename detection can cause transitive renames, e.g. if the two
different sides of history each do one half of:
A/file -> B/file
B/ -> C/
then directory rename detection transitively renames to give us C/file.
Since the default for merge.directoryRenames is conflict, this results
in an error message saying it is unclear whether the file should be
placed at B/file or C/file.
What if C/ is A/, though? In such a case, the transitive rename would
give us A/file, the original name we started with. Logically, having
an error message with B/file vs. A/file should be fine, as should
leaving the file where it started. But the logic in both
merge-recursive and merge-ort did not handle a case of a filename being
renamed to itself correctly; merge-recursive had two bugs, and merge-ort
had one. Add some testcases covering such a scenario.
Based-on-testcase-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git grep allows combining two patterns with --and. It checks and
reports if the second pattern is missing when compiling the expression.
A missing first pattern, however, is only reported later at match time.
Thus no error is returned if no matching is done, e.g. because no file
matches the also given pathspec.
When that happens we get an expression tree with an GREP_NODE_AND node
and a NULL pointer to the missing left child. free_pattern_expr()
tries to dereference it during the cleanup at the end, which results
in a segmentation fault.
Fix this by verifying the presence of the left operand at expression
compilation time.
Reported-by: Matthew Hughes <matthewhughes934@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linux users may benefit from additional information on how to
avoid ENOMEM from mmap despite the system having enough RAM to
accomodate them. We can't reliably unmap pack windows to work
around the issue since malloc and other library routines may
mmap without our knowledge.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests will fail under --verbose because while we've unset COLUMNS
since b1d645b58a (tests: unset COLUMNS inherited from environment,
2012-03-27), we also look for the columns with an ioctl(..,
TIOCGWINSZ, ...) on some platforms. By setting COLUMNS again we
preempt the TIOCGWINSZ lookup in pager.c's term_columns(), it'll take
COLUMNS over TIOCGWINSZ,
This fixes t0500-progress-display.sh., which broke because of a
combination of the this issue and the progress output reacting to the
column width since 545dc345eb (progress: break too long progress bar
lines, 2019-04-12). The t5324-split-commit-graph.sh fails in a similar
manner due to progress output, see [1] for details.
The issue is not specific to progress.c, the diff code also checks
COLUMNS and some of its tests can be made to fail in a similar
manner[2], anything that invokes a pager is potentially affected.
See ea77e675e5 (Make "git help" react to window size correctly,
2005-12-18) and ad6c3739a3 (pager: find out the terminal width before
spawning the pager, 2012-02-12) for how the TIOCGWINSZ code ended up
in pager.c
1. http://lore.kernel.org/git/20210624051253.GG6312@szeder.dev
2. https://lore.kernel.org/git/20210627074419.GH6312@szeder.dev/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't show the very verbose $(FIND_SOURCE_FILES) command on every
"make cscope" invocation.
See my recent 3c80fcb591 (Makefile: add QUIET_GEN to "tags" and "TAGS"
targets, 2021-03-28) for the same fix for the other adjacent targets.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the ".PHONY: cscope" rule to live alongside the "cscope" target
itself, not to be all the way near the bottom where we define the
"FORCE" rule.
That line was last modified in 2f76919517 (MinGW: avoid collisions
between "tags" and "TAGS", 2010-09-28).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the GNU make ".DELETE_ON_ERROR" flag in our main Makefile, as we
already do in the Documentation/Makefile since db10fc6c09 (doc:
simplify Makefile using .DELETE_ON_ERROR, 2021-05-21).
Now if a command to make X fails X will be removed, the default
behavior of GNU make is to only do so if "make" itself is interrupted
with a signal.
E.g. if we now intentionally break one of the rules with:
- mv $@+ $@
+ mv $@+ $@ && \
+ false
We'll get output like:
$ make git
CC git.o
LINK git
make: *** [Makefile:2179: git] Error 1
make: *** Deleting file 'git'
$ file git
git: cannot open `git' (No such file or directory)
Before this change we'd leave the file in place in under this
scenario.
As in db10fc6c09 this allows us to remove patterns of removing
leftover $@ files at the start of rules, since previous failing runs
of the Makefile won't have left those littered around anymore.
I'm not as confident that we should be replacing the "mv $@+ $@"
pattern entirely, since that means that external programs or one of
our other Makefiles might race and get partial content.
I'm not changing $(REMOTE_CURL_ALIASES) since that uses a ln/ln -s/cp
dance, and would require the addition of "-f" flags if the "rm" at the
start was removed. I've also got plans to fix that ln/ln -s/cp pattern
in another series.
For $(LIB_FILE) and $(XDIFF_LIB) we can rely on the "c" (create) being
present in ARFLAGS.
I'm not changing "$(ETAGS_TARGET)", "tags" and "cscope" because
they've got a messy combination of removing "$@+" not "$@" at the
beginning, or "$@*". I'm also addressing those in another series.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git multi-pack-index verify' inspects the data in an existing MIDX for
correctness by checking that the recorded object offsets are correct,
and so on.
But it does not check that the file's trailing checksum matches the data
that it records. So, if an on-disk corruption happened to occur in the
final few bytes (and all other data was recorded correctly), we would:
- get a clean result from 'git multi-pack-index verify', but
- be unable to reuse the existing MIDX when writing a new one (since
we now check for checksum mismatches before reusing a MIDX)
Teach the 'verify' sub-command to recognize corruption in the checksum
by calling midx_checksum_valid().
Suggested-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a new multi-pack index, Git tries to reuse as much of the
data from an existing MIDX as possible, like object offsets. This is
done to avoid re-opening a bunch of *.idx files unnecessarily, but can
lead to problems if the data we are reusing is corrupt.
That's because we'll blindly reuse data from an existing MIDX without
checking its trailing checksum for validity. So if there is memory
corruption while writing a MIDX, or disk corruption in the intervening
period between writing and reuse, we'll blindly propagate those bad
values forward.
Suppose we experience a memory corruption while writing a MIDX such that
we write an incorrect object offset (or alternatively, the disk corrupts
the data after being written, but before being reused). Then when we go
to write a new MIDX, we'll reuse the bad object offset without checking
its validity. This means that the MIDX we just wrote is broken, but its
trailing checksum is in-tact, since we never bothered to look at the
values before writing.
In the above, a "git multi-pack-index verify" would have caught the
problem before writing, but writing a new MIDX wouldn't have noticed
anything wrong, blindly carrying forward the corrupt offset.
Individual pack indexes check their validity by verifying the crc32
attached to each entry when carrying data forward during a repack.
We could solve this problem for MIDXs in the same way, but individual
crc32's don't make much sense, since their entries are so small.
Likewise, checking the whole file on every read may be prohibitively
expensive if a repository has a lot of objects, packs, or both.
But we can check the trailing checksum when reusing an existing MIDX
when writing a new one. And a corrupt MIDX need not stop us from writing
a new one, since we can just avoid reusing the existing one at all and
pretend as if we are writing a new MIDX from scratch.
Suggested-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite an existing caller in `git commit-graph verify` to take
advantage of checksum_valid().
Note that the replacement isn't a verbatim cut-and-paste, since the new
function avoids using hashfile at all and instead talks to the_hash_algo
directly, but it is functionally equivalent.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new function which checks the validity of a file's trailing
checksum. This is similar to hashfd_check(), but different since it is
intended to be used by callers who aren't writing the same data (like
`git index-pack --verify`), but who instead want to validate the
integrity of data that they are reading.
Rewrite the first of two callers which could benefit from this new
function in pack-check.c. Subsequent callers will be added in the
following patches.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GitHub Actions to upload/download workflow artifacts saw a major
upgrade since Git's GitHub workflow was established. Let's use it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use a `.bat` script to copy the DLLs in the `vs-build` job, and those
type of scripts are native to CMD, not to PowerShell.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In our continuous builds, Windows is the odd cookie that requires a
complete development environment to be downloaded because there is no
suitable one installed by default on Windows.
Side note: technically, there _is_ a development environment present in
GitHub Actions' build agents: MSYS2. But it differs from Git for
Windows' SDK in subtle points, unfortunately enough so to prevent Git's
test suite from running without failures.
Traditionally, we support downloading this environment (which we
nicknamed `git-sdk-64-minimal`) via a PowerShell scriptlet that accesses
the build artifacts of a dedicated Azure Pipeline (which packages a tiny
subset of the full Git for Windows SDK, containing just enough to build
Git and run its test suite).
This PowerShell script is unfortunately not very robust and sometimes
fails due to network issues.
Of course, we could add code to detect that situation, wait a little,
try again, if it fails again wait a little longer, lather, rinse and
repeat.
Instead of doing all of this in Git's own `.github/workflows/`, though,
let's offload this logic to the new GitHub Action at
https://github.com/marketplace/actions/setup-git-for-windows-sdk
This Action not only downloads and extracts git-sdk-64-minimal _outside_
the worktree (making it no longer necessary to meddle with
`.gitignore` or `.git/info/exclude`), it also adds the `bash.exe` to the
`PATH` and sets the environment variable `MSYSTEM` (an implementation
detail that Git's workflow should never have needed to know about).
This allows us to convert all those funny PowerShell tasks that wanted
to call git-sdk-64-minimal's `bash.exe`: they all are now regular `bash`
scriptlets.
This finally lets us get rid of the funny quoting and escaping where we
had to pay attention not only to quote and escape the Bash scriptlets
properly, but also to add a second level of escaping (with backslashes
for double quotes and backticks for dollar signs) to stop PowerShell
from doing unintended things.
Further, this Action uses a fast caching strategy native to GitHub
Actions that should accelerate the download across CI runs:
git-sdk-64-minimal is usually updated once per 24h, and needs to be
cached only once within that period. Caching it (unfortunately only on
a per-branch basis) speeds up the download step, and makes it much more
robust at the same time by virtue of accessing a cache location that is
closer in the network topology.
With this we can drop the home-rolled caching where we try to accelerate
the test phase by uploading git-sdk-64-minimal as a workflow artifact
after using it to build Git, and then download it as workflow artifact
in the test phase.
Even better: the `vs-test` job no longer needs to depend on the
`windows-build` job. The only reason it depended on it was to ensure
that the `git-sdk-64-minimal` workflow artifact was available.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have two types (a decoration type and an object type) in the
function, let's give them both unique names to avoid accidentally using
one instead of the other.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we load the ref decorations, we parse the object pointed to by each
ref in order to get a "struct object". This is unnecessarily expensive;
we really only need the object struct, and don't even look at the parsed
contents. The exception is tags, which we do need to peel.
We can improve this by looking up the object type first (which is much
cheaper), and skipping the parse entirely for non-tags. This increases
the work slightly for annotated tags (which now do a type lookup _and_ a
parse), but decreases it a lot for other types. On balance, this seems
to be a good tradeoff.
In my git.git clone, with ~2k refs, most of which are branches, the time
to run "git log -1 --decorate" drops from 34ms to 11ms. Even on my
linux.git clone, which contains mostly tags and only a handful of
branches, the time drops from 30ms to 19ms. And on a more extreme
real-world case with ~220k refs, mostly non-tags, the time drops from
2.6s to 650ms.
That command is a lop-sided example, of course, because it does as
little non-loading work as possible. But it does show the absolute time
improvement. Even in something like a full "git log --decorate" on that
extreme repo, we'd still be saving 2s of CPU time.
Ideally we could push this even further, and avoid parsing even tags, by
relying on the packed-refs "peel" optimization (which we could do by
calling peel_iterated_oid() instead of peeling manually). But we can't
do that here. The packed-refs file only stores the bottom-layer of the
peel (so in a "tag->tag->commit" chain, it stores only the commit as the
peel result). But the decoration code wants to peel the layers
individually, annotating the middle layers of the chain.
If the packed-refs file ever learns to store all of the peeled layers,
then we could switch to it. Or even if it stored a flag to indicate the
peel was not multi-layer (because most of them aren't), then we could
use it most of the time and fall back to a manual peel for the rare
cases.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases it's useful for efficiency reasons to get the type of an
object before deciding whether to parse it, but we still want an object
struct. E.g., in reachable.c, bitmaps give us the type, but we just want
to mark flags on each object. Likewise, we may loop over every object
and only parse tags in order to peel them; checking the type first lets
us avoid parsing the non-tags.
But our lookup_blob(), etc, functions make getting an object struct
annoying: we have to call the right function for every type. And we
cannot just use the generic lookup_object(), because it only returns an
already-seen object; it won't allocate a new object struct.
Let's provide a function that dispatches to the correct lookup_*
function based on a run-time type. In fact, reachable.c already has such
a helper, so we'll just make that public.
I did change the return type from "void *" to "struct object *". While
the former is a clever way to avoid casting inside the function, it's
less safe and less informative to people reading the function
declaration.
The next commit will add a new caller.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The lookup_unknown_object() system is not often used and is somewhat
confusing. Let's try to explain it a bit more (which is especially
important as I'm adding a related but slightly different function in the
next commit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If no --decorate option is given, we default to auto-decoration. And
when that kicks in, cmd_log_init_finish() will unconditionally load the
decoration refs.
However, if we are using a user-format that does not include "%d" or
"%D", we won't show the decorations at all, so we don't need to load
them. We can detect this case and auto-disable them by adding a new
field to our userformat_want helper. We can do this even when the user
explicitly asked for --decorate, because it can't affect the output at
all.
This patch consistently reduces the time to run "git log -1 --format=%H"
on my git.git clone (with ~2k refs) from 34ms to 7ms. On a much more
extreme real-world repository (with ~220k refs), it goes from 2.5s to
4ms.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment only mentions "notes", but there are more fields now (and
I'm about to add another). Let's make it more general, and stick the
struct next to the function to make the list of possibilities obvious.
While we're touching this comment, let's also mention the behavior of
NULL, which some callers rely on (though in the long run, this global is
pretty nasty and probably should get moved into rev_info).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Over time when parts of submodule have been ported from shell to
builtin, many instances of the submodule helper have been added.
Also added with them are some unnecessary option passing
logic that are based on the `prefix` shell variable which never
gets set in their code flows.
On analysis, the only shell functions which have a valid usage
for the `prefix` shell variable are:
- cmd_update: which is the only function which sets the variable
and thus uses it properly
- cmd_init: which uses the variable via a call from cmd_update
So, remove the unnecessary option parsing logic based on the `prefix`
shell variable.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cover blindspots in the testing of stdin handling, including the
"!len" condition added in b5d97e6b0a (pack-objects: run rev-list
equivalent internally., 2006-09-04). The codepath taken with --revs
and read_object_list_from_stdin() acts differently in some of these
common cases, let's test for those.
The "--stdin --revs" test being added here stresses the combination of
--stdin-packs and the revision.c --stdin argument, some of this was
covered in a test added in 339bce27f4 (builtin/pack-objects.c: add
'--stdin-packs' option, 2021-02-22), but let's make sure that
GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=true keeps erroring out about
--stdin, and it isn't picked up by the revision.c API's handling of
that option.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git for Windows is compiled with a runtime prefix, and that runtime
prefix is typically `C:/Program Files/Git/mingw64`. As we want the
system gitconfig to live in the sibling directory `etc`, we define the
relative path as `../etc/gitconfig`.
However, as reported by Philip Oakley, the output of `git config
--show-origin --system -l` looks rather ugly, as it shows the path as
`file:C:/Program Files/Git/mingw64/../etc/gitconfig`, i.e. with the
`mingw64/../` part.
By normalizing the path, we get a prettier path.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when Git for Windows is built with CMake, the system Git config is
expected in a different location than when building via `make`: the former
expects it to be in `<runtime-prefix>/mingw64/etc/gitconfig`, the latter in
`<runtime-prefix>/etc/gitconfig`.
Because of this, things like `git clone` do not work correctly (because cURL is
no longer able to find its certificate bundle that it needs to validate HTTPS
certificates). See the full bug report and discussion here:
https://github.com/git-for-windows/git/issues/3071#issuecomment-789261386.
This commit aligns the CMake-based build by mimicking what is already done in
`config.mak.uname`.
This closes https://github.com/git-for-windows/git/issues/3071.
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git for Windows' prefix is `/mingw64/` (or `/mingw32/` for 32-bit
versions), therefore the system config is located at the clunky location
`C:\Program Files\Git\mingw64\etc\gitconfig`.
This moves the system config into a more logical location: the `mingw64`
part of `C:\Program Files\Git\mingw64\etc\gitconfig` never made sense,
as it is a mere implementation detail. Let's skip the `mingw64` part and
move this to `C:\Program Files\Git\etc\gitconfig`.
Side note: in the rare (and not recommended) case a user chooses to
install 32-bit Git for Windows on a 64-bit system, the path will of
course be `C:\Program Files (x86)\Git\etc\gitconfig`.
Background: During the Git for Windows v1.x days, the system config was
located at `C:\Program Files (x86)\Git\etc\gitconfig`. With Git for
Windows v2.x, it moved to `C:\Program Files\Git\mingw64\gitconfig` (or
`C:\Program Files (x86)\Git\mingw32\gitconfig`). Rather than fixing it
back then, we tried to introduce a "Windows-wide" config, but that never
caught on.
Likewise, we move the system `gitattributes` into the same directory.
Obviously, we are cautious to do this only for the known install
locations `/mingw64` and `/mingw32`; If anybody wants to override that
while building their version of Git (e.g. via `make prefix=$HOME`), we
leave the default location of the system config and gitattributes alone.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Typofix (chose -> choose) in the documentation of the patch option
under the commit command.
Signed-off-by: Beshr Kayali <me@beshr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We query `TIOCGWINSZ` in Git to determine the correct value for
`COLUMNS`, and then set that environment variable.
If `TIOCGWINSZ` is not available, we fall back to the hard-coded value
80 _and still_ set the environment variable.
On Windows this is a problem. The reason is that Git for
Windows uses a version of `less` that relies on the MSYS2 runtime to
interact with the pseudo terminal (typically inside a MinTTY window,
which is also aware of the MSYS2 runtime). Both MinTTY and `less.exe`
interact with that pseudo terminal via `ioctl()` calls (which the MSYS2
runtime emulates even if there is no such thing on Windows).
Since https://github.com/gwsw/less/commit/bb0ee4e76c2, `less` prefers
the `COLUMNS` variable over asking ncurses itself.
But `git.exe` itself is _not_ aware of the MSYS2 runtime, or for that
matter of that pseudo terminal, and has no way to call `ioctl()` or
`TIOCGWINSZ`.
Therefore, `git.exe` will fall back to hard-coding 80 columns, no matter
what the actual terminal size is.
But `less.exe` is totally able to interact with the MSYS2 runtime and
would not actually require Git's help (which actually makes things
worse here). So let's not override `COLUMNS` on Windows.
Let's just not set `COLUMNS` unless we managed to query the actual value
from the terminal.
This fixes https://github.com/git-for-windows/git/issues/3235
Co-authored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both in t4258 and in t9001, the code of the tests following shows the
proper name for the configuration variables. So use the correct names
in the test messages as well.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As can be seen in files "Documentation/blame-options.txt" and
"builtin/blame.c", the name of this configuration option is
"blame.markUnblamableLines".
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one step towards supporting partial clone submodules.
Even after this patch, we will still lack partial clone submodules
support, primarily because a lot of Git code that accesses submodule
objects does so by adding their object stores as alternates, meaning
that any lazy fetches that would occur in the submodule would be done
based on the config of the superproject, not of the submodule. This also
prevents testing of the functionality in this patch by user-facing
commands. So for now, test this mechanism using a test helper.
Besides that, there is some code that uses the wrapper functions
like has_promisor_remote(). Those will need to be checked to see if they
could support the non-wrapper functions instead (and thus support any
repository, not just the_repository).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule.c has functionality that prepares the environment for running
a subprocess in a new repo. The lazy-fetching code (used in partial
clones) will need this in a subsequent commit, so move it to a more
central location.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
14111fc492 ("git: submodule honor -c credential.* from command line",
2016-03-01) taught Git to pass through the GIT_CONFIG_PARAMETERS
environment variable when invoking a subprocess on behalf of a
submodule. But when d8d77153ea ("config: allow specifying config entries
via envvar pairs", 2021-01-15) introduced support for GIT_CONFIG_COUNT
(and its associated GIT_CONFIG_KEY_? and GIT_CONFIG_VALUE_?), the
subprocess mechanism wasn't updated to also pass through these
variables.
Since they are conceptually the same (d8d77153ea was written to address
a shortcoming of GIT_CONFIG_PARAMETERS), update the submodule subprocess
mechanism to also pass through GIT_CONFIG_COUNT.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using global variables to store promisor remote information,
store this config in struct repository instead, and add
repository-agnostic non-static functions corresponding to the existing
non-static functions that only work on the_repository.
The actual lazy-fetching of missing objects currently does not work on
repositories other than the_repository, and will still not work after
this commit, so add a BUG message explaining this. A subsequent commit
will remove this limitation.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move repository_format_partial_clone, which is currently a global
variable, into struct repository. (Full support for per-repository
partial clone config will be done in a subsequent commit - this is split
into its own commit because of the extent of the changes needed.)
The new repo-specific variable cannot be set in
check_repository_format_gently() (as is currently), because that
function does not know which repo it is operating on (or even whether
the value is important); therefore this responsibility is delegated to
the outermost caller that knows. Of all the outermost callers that know
(found by looking at all functions that call clear_repository_format()),
I looked at those that either read from the main Git directory or write
into a struct repository. These callers have been modified accordingly
(write to the_repository in the former case and write to the given
struct repository in the latter case).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the submit contain binary files, it will throw exception and stop submit when try to append diff line description.
This commit will skip non-text data files when exception UnicodeDecodeError thrown.
The skip will not affect actual submit files in the resulting cl,
the diff line description will only appear in submit template,
so you can review what changed before actully submit to p4.
I don't know if add any message here will be helpful for users,
so I choose to just skip binary content, since it already append filename previously.
Signed-off-by: dorgon.chang <dorgonman@hotmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing tests for --remotes, --list and --merge-base. These are
not exhaustive, but better than the nothing we have now.
There were some tests for this command added in f76412ed6d ([PATCH]
Add 'git show-branch'., 2005-08-21) has never been properly tested,
namely for the --all option in t6432-merge-recursive-space-options.sh,
and some of --merge-base and --independent in t6010-merge-base.sh.
This fixes a few more blind spots, but there's still a lot of behavior
that's not tested for.
These new tests show the odd (and possibly unintentional) behavior of
--merge-base with one argument, and how its output is the same as "git
merge-base" with N bases in this particular case. See the test added
in f621a8454d (git-merge-base/git-show-branch --merge-base:
Documentation and test, 2009-08-05) for a case where the two aren't
the same.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the colored output introduced in ab07ba2a24 (show-branch: color
the commit status signs, 2009-04-22) to not color and reset each
individual space character we use for padding. The intent is to color
just the "!", "+" etc. characters.
This makes the output easier to test, so let's do that now. The test
would be much more verbose without a color/reset for each space
character. Since the coloring cycles through colors we previously had
a "rainbow of space characters".
In theory this breaks things for anyone who's relying on the exact
colored output of show-branch, in practice I'd think anyone parsing it
isn't actively turning on the colored output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass the bad tags we've created in the mktag tests through
fast-export, it will die on the bad object or ref, let's make sure
that happens.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a "for-each-ref" for all the mktag tests. This test would have
caught the segfault which was fixed in c685450880 (ref-filter: fix
NULL check for parse object failure, 2021-04-01). Let's make sure we
test that code more exhaustively.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the mktag tests to pass the created bad tag through update-ref
and fsck.
The reason for passing it through update-ref is to guard against it
having a segfault as for-each-ref did before c685450880 (ref-filter:
fix NULL check for parse object failure, 2021-04-01).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the mktag tests to pass the tag we've created through both
hash-object --literally and fsck.
This checks that fsck itself will not complain about certain invalid
content if a reachable tip isn't involved. Due to how fsck works and
walks the graph the failure will be different if the object is
reachable, so we might succeed before we've created the ref.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7fbbcb21b1 ("diff: batch fetching of missing blobs", 2019-04-05)
introduced batching of fetching missing blobs, so that the diff
machinery would have one fetch subprocess grab N blobs instead of N
processes each grabbing 1.
However, the diff machinery is not the only thing in a merge that needs
to work on blobs. The 3-way content merges need them as well. Rather
than download all the blobs 1 at a time, prefetch all the blobs needed
for regular content merges.
This does not cover all possible paths in merge-ort that might need to
download blobs. Others include:
- The blob_unchanged() calls to avoid modify/delete conflicts (when
blob renormalization results in an "unchanged" file)
- Preliminary content merges needed for rename/add and
rename/rename(2to1) style conflicts. (Both of these types of
conflicts can result in nested conflict markers from the need to do
two levels of content merging; the first happens before our new
prefetch_for_content_merges() function.)
The first of these wouldn't be an extreme amount of work to support, and
even the second could be theoretically supported in batching, but all of
these cases seem unusual to me, and this is a minor performance
optimization anyway; in the worst case we only get some of the fetches
batched and have a few additional one-off fetches. So for now, just
handle the regular 3-way content merges in our prefetching.
For the testcase from the previous commit, the number of downloaded
objects remains at 63, but this drops the number of fetches needed from
32 down to 20, a sizeable reduction.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-ort was designed to minimize the amount of data needed and used,
and several changes were made to diffcore-rename to take advantage of
extra metadata to enable this data minimization (particularly the
relevant_sources variable for skipping "irrelevant" renames). This
effort obviously succeeded in drastically reducing computation times,
but should also theoretically allow partial clones to download much less
information. Previously, though, the "prefetch" command used in
diffcore-rename had never been modified and downloaded many blobs that
were unnecessary for merge-ort. This commit corrects that.
When doing basename comparisons, we want to fetch only the objects that
will be used for basename comparisons. If after basename fetching this
leaves us with no more relevant sources (or no more destinations), then
we won't need to do the full inexact rename detection and can skip
downloading additional source and destination files. Even if we have to
do that later full inexact rename detection, irrelevant sources are
culled after basename matching and before the full inexact rename
detection, so we can still avoid downloading the blobs for irrelevant
sources. Rename prefetch() to inexact_prefetch(), and introduce a
new basename_prefetch() to take advantage of this.
If we modify the testcase from commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2021-01-23)
to pass
--sparse --filter=blob:none
to the clone command, and use the new trace2 "fetch_count" output from
a few commits ago to track both the number of fetch subcommands invoked
and the number of objects fetched across all those fetches, then for
the mega-renames testcase we observe the following:
BEFORE this commit, rebasing 35 patches:
strategy # of fetches total # of objects fetched
--------- ------------ --------------------------
recursive 62 11423
ort 30 11391
AFTER this commit, rebasing the same 35 patches:
ort 32 63
This means that the new code only needs to download less than 2 blobs
per patch being rebased. That is especially interesting given that the
repository at the start only had approximately half a dozen TOTAL blobs
downloaded to start with (because the default sparse-checkout of just
the toplevel directory was in use).
So, for this particular linux kernel testcase that involved ~26,000
renames on the upstream side (drivers/ -> pilots/) across which 35
patches were being rebased, this change reduces the number of blobs that
need to be downloaded by a factor of ~180.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
estimate_similarity() was setting up a diff_populate_filespec_options
every time it was called, requiring the caller of estimate_similarity()
to pass in some data needed to set up this option. Currently the needed
data consisted of a single variable (skip_unmodified), but we want to
also have the different estimate_similarity() callsites start using
different missing_object_cb functions as well. Rather than also passing
that data in, just have the caller pass in the whole
diff_populate_filespec_options, and reduce the number of times we need to
set it up.
As a side note, this also drops the number of calls to
has_promisor_remote() dramatically. If L is the number of basename
paths to compare, M is the number of inexact sources, and N is the
number of inexact destinations, then the number of calls to
has_promisor_remote() drops from L+M*N down to at most 2 -- one for each
of the sites that calls estimate_similarity(). has_promisor_remote() is
a very fast function so this almost certainly has no measurable
performance impact, but it seems cleaner to avoid calling that function
so many times.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrei found that the word "shallow" has an extra letter "l" in
"po/zh_CN.po". There are similar typos in other l10n files.
Reported-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Two spaces unaligned to anything is not part of the coding-style. A
single tab is.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to store ran_ff. Now it's obvious from the conditionals.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently "git pull --rebase" takes a shortcut in the case a
fast-forward merge is possible; run_merge() is called with --ff-only.
However, "git merge" didn't have an --autostash option, so, when "git
pull --rebase --autostash" was called *and* the fast-forward merge
shortcut was taken, then the pull failed.
This was fixed in commit f15e7cf5cc (pull: ff --rebase --autostash
works in dirty repo, 2017-06-01) by simply skipping the fast-forward
merge shortcut.
Later on "git merge" learned the --autostash option [a03b55530a
(merge: teach --autostash option, 2020-04-07)], and so did "git pull"
[d9f15d37f1 (pull: pass --autostash to merge, 2020-04-07)].
Therefore it's not necessary to skip the fast-forward merge shortcut
anymore when called with --rebase --autostash.
Let's always take the fast-forward merge shortcut by essentially
reverting f15e7cf5cc.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent update to contrib/completion/git-completion.bash causes bash to fail
auto complete custom commands that are wrapped with __git_func_wrap. Declaring
__git_cmd_idx=0 inside __git_func_wrap resolves the issue.
Signed-off-by: Fabian Wermelinger <fabianw@mavt.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not all systems have a readlink program available for use by the shell.
This causes t3210 to fail on at least AIX. Let's provide a perl
one-liner to do the same thing, and use it there.
I also updated calls in t9802. Nobody reported failure there, but it's
the same issue. Presumably nobody actually tests with p4 on AIX in the
first place (if it is even available there).
I left the use of readlink in the "--valgrind" setup in test-lib.sh, as
valgrind isn't available on exotic platforms anyway (and I didn't want
to increase dependencies between test-lib.sh and test-lib-functions.sh).
There's one other curious case. Commit d2addc3b96 (t7800: readlink may
not be available, 2016-05-31) fixed a similar case. We can't use our
wrapper function there, though, as it's inside a sub-script triggered by
Git. It uses a slightly different technique ("ls" piped to "sed"). I
chose not to use that here as it gives confusing "ls -l" output if the
file is unexpectedly not a symlink (which is OK for its limited use, but
potentially confusing for general use within the test suite). The perl
version emits the empty string.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new function "get_abbrev_oid" to get abbrev object ID. This
function has a default value which helps to prepare a nonempty replace
pattern for sed command. An empty replace pattern may cause sed fail
to allocate memory.
Refactor function "make_user_friendly_and_stable_output" to use
"get_abbrev_oid" to get abbrev object ID.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor function "create_commits_in" to use "test_commit" to create
commit.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before comparing with the expect file, we used to call function
"make_user_friendly_and_stable_output" to filter out trailing spaces in
output. Ævar recommends using pattern "s/Z$//" to prepare expect file,
and then compare it with raw output.
Since we have fixed the issue of occasionally missing the clear-to-eol
suffix when displaying sideband #2 messages, it is safe and stable to
test against raw output.
Suggested-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "demultiplex_sideband()" sees a nonempty message ending with CR or
LF on the sideband #2, it adds "suffix" string to clear to the end of
the current line, which helps when relaying a progress display whose
records are terminated with CRs. But if it sees a single LF, no
clear-to-end suffix should be appended, because this single LF is used
to end the progress display by moving to the next line, and the final
progress display above should be preserved.
However, the code forgot that depending on the length of the payload
line, such a CR may fall exactly at the packet boundary and the
number of bytes before the CR from the beginning of the packet could
be zero. In such a case, the message that was terminated by the CR
were leftover in the "scratch" buffer in the previous call to the
function and we still need to clear to the end of the current line.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ævar reported that the function `make_user_friendly_and_stable_output()`
failed on a i386 box (gcc45) in the gcc farm boxes with error:
sed: couldn't re-allocate memory
It turns out that older versions of bash (4.3) or dash (0.5.7) cannot
evaluate expression like `${A%${A#???????}}` used to get the leading 7
characters of variable A.
Replace the incompatible parameter expansion so that t6020 works on
older version of bash or dash.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These typos were found while searching the codebase for gendered
pronouns. In the case of t9300-fast-import.sh, remove a confusing
comment that is unnecessary to the understanding of the test.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generally avoid specifying the gender of our users in order to be
more inclusive, but sometimes a few slip by due to habit.
Since by doing a little bit of rewording we can avoid this irrelevant
detail, let's do so.
Inspired-by: Derrick Stolee <dstolee@microsoft.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using gendered pronouns for an anonymous person applies a gender where
none is known and further excludes readers who do not use gendered
pronouns. Avoid such examples in the documentation by using "they" or
passive voice to avoid the need for a pronoun.
Inspired-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a missing test for the behavior of the pre-auto-gc hook added in
0b85d92661 (Documentation/hooks: add pre-auto-gc hook, 2008-04-02).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start by creating an "actual" file in a core.hooksPath test that has
the hook echoing to the "actual" file.
We later test_cmp that file to see what hooks were run. If we fail to
run our hook(s) we'll have an empty list of hooks for the test_cmp
instead of a nonexisting file. For the logic of this test that makes more sense.
See 867ad08a26 (hooks: allow customizing where the hook directory is,
2016-05-04) for the commit that added these tests.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without the "d", it sounds like a command, not an error, and is liable
to be translated incorrectly.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modernize test code added in ce567d1867 (Add test to show that
show-branch misses out the 8th column, 2008-07-23) and
11ee57bc4c (sort_in_topological_order(): avoid setting a commit flag,
2008-07-23) to use test helpers.
I'm renaming "out" to "actual" for consistency with other tests, and
introducing a "branches.sorted" file in the setup, to make it clear
that it's important that the list be sorted in this particular way.
The "show-branch" output is indented with spaces, which would cause
complaints under "git show --check" with an indented here-doc
block. Let's prefix the lines with "> " to work around that, and to
make it clear that the leading whitespace is important.
We can also get rid of the hardcoding of "main" added here in
334afbc76f (tests: mark tests relying on the current default for
`init.defaultBranch`, 2020-11-18). For this test we're setting up an
"initial" commit anyway, and now that we've moved over to test_commit
we can reference that instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the only *show-branch* test file to indicate that more tests
belong it in than just the one-off octopus test it now contains.
The test was initially added in ce567d1867 (Add test to show that
show-branch misses out the 8th column, 2008-07-23) and
11ee57bc4c (sort_in_topological_order(): avoid setting a commit flag,
2008-07-23). Those two add almost the same content, one with a
test_expect_success and the other a test_expect_failure (a bug being
tested for was fixed on one of the branches).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
report_result() sends a struct to the parent process, but that struct
would contain uninitialised padding bytes. Running this code under MSAN
rightly triggers a warning - but we don't particularly care about this
warning because we control the receiving code, and we therefore know
that those padding bytes won't be read on the receiving end.
We could simply suppress this warning under MSAN with the approporiate
ifdef'd attributes, but a less intrusive solution is to 0-initialise the
struct, which guarantees that the padding will also be initialised.
Interestingly, in the error-case branch, we only try to copy the first
two members of pc_item_result, by copying only PC_ITEM_RESULT_BASE_SIZE
bytes. However PC_ITEM_RESULT_BASE_SIZE is defined as
'offsetof(the_last_member)', which means that we're copying padding bytes
after the end of the second last member. We could avoid doing this by
redefining PC_ITEM_RESULT_BASE_SIZE as
'offsetof(second_last_member) + sizeof(second_last_member)', but there's
no huge benefit to doing so (and this patch silences the MSAN warning in
this scenario either way).
MSAN output from t2080 (partially interleaved due to the
parallel work :) ):
Uninitialized bytes in __interceptor_write at offset 12 inside [0x7fff37d83408, 160)
==23279==WARNING: MemorySanitizer: use-of-uninitialized-value
Uninitialized bytes in __interceptor_write at offset 12 inside [0x7ffdb8a07ec8, 160)
==23280==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0xd5ac28 in xwrite /home/ahunt/git/git/wrapper.c:256:8
#1 0xd5b327 in write_in_full /home/ahunt/git/git/wrapper.c:311:21
#2 0xb0a8c4 in do_packet_write /home/ahunt/git/git/pkt-line.c:221:6
#3 0xb0a5fd in packet_write /home/ahunt/git/git/pkt-line.c:242:6
#4 0x4f7441 in report_result /home/ahunt/git/git/builtin/checkout--worker.c:69:2
#5 0x4f6be6 in worker_loop /home/ahunt/git/git/builtin/checkout--worker.c💯3
#6 0x4f68d3 in cmd_checkout__worker /home/ahunt/git/git/builtin/checkout--worker.c:143:2
#7 0x4a1e76 in run_builtin /home/ahunt/git/git/git.c:461:11
#8 0x49e1e7 in handle_builtin /home/ahunt/git/git/git.c:714:3
#9 0x4a0c08 in run_argv /home/ahunt/git/git/git.c:781:4
#10 0x49d5a8 in cmd_main /home/ahunt/git/git/git.c:912:19
#11 0x7974da in main /home/ahunt/git/git/common-main.c:52:11
#12 0x7f8778114349 in __libc_start_main (/lib64/libc.so.6+0x24349)
#13 0x421bd9 in _start /home/abuild/rpmbuild/BUILD/glibc-2.26/csu/../sysdeps/x86_64/start.S:120
Uninitialized value was created by an allocation of 'res' in the stack frame of function 'report_result'
#0 0x4f72c0 in report_result /home/ahunt/git/git/builtin/checkout--worker.c:55
SUMMARY: MemorySanitizer: use-of-uninitialized-value /home/ahunt/git/git/wrapper.c:256:8 in xwrite
Exiting
#0 0xd5ac28 in xwrite /home/ahunt/git/git/wrapper.c:256:8
#1 0xd5b327 in write_in_full /home/ahunt/git/git/wrapper.c:311:21
#2 0xb0a8c4 in do_packet_write /home/ahunt/git/git/pkt-line.c:221:6
#3 0xb0a5fd in packet_write /home/ahunt/git/git/pkt-line.c:242:6
#4 0x4f7441 in report_result /home/ahunt/git/git/builtin/checkout--worker.c:69:2
#5 0x4f6be6 in worker_loop /home/ahunt/git/git/builtin/checkout--worker.c💯3
#6 0x4f68d3 in cmd_checkout__worker /home/ahunt/git/git/builtin/checkout--worker.c:143:2
#7 0x4a1e76 in run_builtin /home/ahunt/git/git/git.c:461:11
#8 0x49e1e7 in handle_builtin /home/ahunt/git/git/git.c:714:3
#9 0x4a0c08 in run_argv /home/ahunt/git/git/git.c:781:4
#10 0x49d5a8 in cmd_main /home/ahunt/git/git/git.c:912:19
#11 0x7974da in main /home/ahunt/git/git/common-main.c:52:11
#12 0x7f2749a0e349 in __libc_start_main (/lib64/libc.so.6+0x24349)
#13 0x421bd9 in _start /home/abuild/rpmbuild/BUILD/glibc-2.26/csu/../sysdeps/x86_64/start.S:120
Uninitialized value was created by an allocation of 'res' in the stack frame of function 'report_result'
#0 0x4f72c0 in report_result /home/ahunt/git/git/builtin/checkout--worker.c:55
SUMMARY: MemorySanitizer: use-of-uninitialized-value /home/ahunt/git/git/wrapper.c:256:8 in xwrite
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cache_entry contains an object_id, and compare_ce_content() would
include that field when calling memcmp on a subset of the cache_entry.
Depending on which hashing algorithm is being used, only part of
object_id.hash is actually being used, therefore including it in a
memcmp() is incorrect. Instead we choose to exclude the object_id when
calling memcmp(), and call oideq() separately.
This issue was found when running t1700-split-index with MSAN, see MSAN
output below (on my machine, offset 76 corresponds to 4 bytes after the
start of object_id.hash).
Uninitialized bytes in MemcmpInterceptorCommon at offset 76 inside [0x7f60e7c00118, 92)
==27914==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x4524ee in memcmp /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/msan/../sanitizer_common/sanitizer_common_interceptors.inc:873:10
#1 0xc867ae in compare_ce_content /home/ahunt/git/git/split-index.c:208:8
#2 0xc859fb in prepare_to_write_split_index /home/ahunt/git/git/split-index.c:336:9
#3 0xb4bbca in write_split_index /home/ahunt/git/git/read-cache.c:3107:2
#4 0xb42b4d in write_locked_index /home/ahunt/git/git/read-cache.c:3295:8
#5 0x638058 in try_merge_strategy /home/ahunt/git/git/builtin/merge.c:758:7
#6 0x63057f in cmd_merge /home/ahunt/git/git/builtin/merge.c:1663:9
#7 0x4a1e76 in run_builtin /home/ahunt/git/git/git.c:461:11
#8 0x49e1e7 in handle_builtin /home/ahunt/git/git/git.c:714:3
#9 0x4a0c08 in run_argv /home/ahunt/git/git/git.c:781:4
#10 0x49d5a8 in cmd_main /home/ahunt/git/git/git.c:912:19
#11 0x7974da in main /home/ahunt/git/git/common-main.c:52:11
#12 0x7f60e928e349 in __libc_start_main (/lib64/libc.so.6+0x24349)
#13 0x421bd9 in _start /home/abuild/rpmbuild/BUILD/glibc-2.26/csu/../sysdeps/x86_64/start.S:120
Uninitialized value was stored to memory at
#0 0x447eb9 in __msan_memcpy /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/msan/msan_interceptors.cpp:1558:3
#1 0xb4d1e6 in dup_cache_entry /home/ahunt/git/git/read-cache.c:3457:2
#2 0xd214fa in add_entry /home/ahunt/git/git/unpack-trees.c:215:18
#3 0xd1fae0 in keep_entry /home/ahunt/git/git/unpack-trees.c:2276:2
#4 0xd1ff9e in twoway_merge /home/ahunt/git/git/unpack-trees.c:2504:11
#5 0xd27028 in call_unpack_fn /home/ahunt/git/git/unpack-trees.c:593:12
#6 0xd2443d in unpack_nondirectories /home/ahunt/git/git/unpack-trees.c:1106:12
#7 0xd19435 in unpack_callback /home/ahunt/git/git/unpack-trees.c:1306:6
#8 0xd0d7ff in traverse_trees /home/ahunt/git/git/tree-walk.c:532:17
#9 0xd1773a in unpack_trees /home/ahunt/git/git/unpack-trees.c:1683:9
#10 0xdc6370 in checkout /home/ahunt/git/git/merge-ort.c:3590:8
#11 0xdc51c3 in merge_switch_to_result /home/ahunt/git/git/merge-ort.c:3728:7
#12 0xa195a9 in merge_ort_recursive /home/ahunt/git/git/merge-ort-wrappers.c:58:2
#13 0x637fff in try_merge_strategy /home/ahunt/git/git/builtin/merge.c:751:12
#14 0x63057f in cmd_merge /home/ahunt/git/git/builtin/merge.c:1663:9
#15 0x4a1e76 in run_builtin /home/ahunt/git/git/git.c:461:11
#16 0x49e1e7 in handle_builtin /home/ahunt/git/git/git.c:714:3
#17 0x4a0c08 in run_argv /home/ahunt/git/git/git.c:781:4
#18 0x49d5a8 in cmd_main /home/ahunt/git/git/git.c:912:19
#19 0x7974da in main /home/ahunt/git/git/common-main.c:52:11
Uninitialized value was created by a heap allocation
#0 0x44e73d in malloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/msan/msan_interceptors.cpp:901:3
#1 0xd592f6 in do_xmalloc /home/ahunt/git/git/wrapper.c:41:8
#2 0xd59248 in xmalloc /home/ahunt/git/git/wrapper.c:62:9
#3 0xa17088 in mem_pool_alloc_block /home/ahunt/git/git/mem-pool.c:22:6
#4 0xa16f78 in mem_pool_init /home/ahunt/git/git/mem-pool.c:44:3
#5 0xb481b8 in load_all_cache_entries /home/ahunt/git/git/read-cache.c
#6 0xb44d40 in do_read_index /home/ahunt/git/git/read-cache.c:2298:17
#7 0xb48a1b in read_index_from /home/ahunt/git/git/read-cache.c:2389:8
#8 0xbd5a0b in repo_read_index /home/ahunt/git/git/repository.c:276:8
#9 0xb4bcaf in repo_read_index_unmerged /home/ahunt/git/git/read-cache.c:3326:2
#10 0x62ed26 in cmd_merge /home/ahunt/git/git/builtin/merge.c:1362:6
#11 0x4a1e76 in run_builtin /home/ahunt/git/git/git.c:461:11
#12 0x49e1e7 in handle_builtin /home/ahunt/git/git/git.c:714:3
#13 0x4a0c08 in run_argv /home/ahunt/git/git/git.c:781:4
#14 0x49d5a8 in cmd_main /home/ahunt/git/git/git.c:912:19
#15 0x7974da in main /home/ahunt/git/git/common-main.c:52:11
#16 0x7f60e928e349 in __libc_start_main (/lib64/libc.so.6+0x24349)
SUMMARY: MemorySanitizer: use-of-uninitialized-value /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/msan/../sanitizer_common/sanitizer_common_interceptors.inc:873:10 in memcmp
Exiting
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the mktag --no-strict test to actually test success under
--no-strict, that test was added in 06ce79152b (mktag: add a
--[no-]strict option, 2021-01-06).
It doesn't make sense to check that we have the same failure except
when we want --no-strict, by doing that we're assuming that the
behavior will be different under --no-strict, bun nothing was testing
for that.
We should instead assert that --strict is the same as --no-strict,
except in the cases where we've declared that it's not.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change check_verify_failure() helper to parse out options from
$@. This makes it easier to add new options in the future. See
06ce79152b (mktag: add a --[no-]strict option, 2021-01-06) for the
initial implementation.
Let's also replace "" quotes with '' for the test body, the varables
we need are eval'd into the body, so there's no need for the quoting
confusion.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, both forward and backslash are valid separators. In
22d5507493 (subtree: don't fuss with PATH, 2021-04-27), however, we
added code that assumes that it can only be the forward slash.
Let's fix that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 22d5507493 (subtree: don't fuss with PATH, 2021-04-27), `git
subtree` was broken thoroughly on Windows.
The reason is that it assumes Unix semantics, where `PATH` is
colon-separated, and it assumes that `$GIT_EXEC_PATH:` is a verbatim
prefix of `$PATH`. Neither are true, the latter in particular because
`GIT_EXEC_PATH` is a Windows-style path, while `PATH` is a Unix-style
path list.
Let's make extra certain that `$GIT_EXEC_PATH` and the first component
of `$PATH` refer to different entities before erroring out.
We do that by using the `test <path1> -ef <path2>` command that verifies
that the inode of `<path1>` and of `<path2>` is the same.
Sadly, this construct is non-portable, according to
https://pubs.opengroup.org/onlinepubs/009695399/utilities/test.html.
However, it does not matter in practice because we still first look
whether `$GIT_EXEC_PREFIX` is string-identical to the first component of
`$PATH`. This will give us the expected result everywhere but in Git for
Windows, and Git for Windows' own Bash _does_ handle the `-ef` operator.
Just in case that we _do_ need to show the error message _and_ are
running in a shell that lacks support for `-ef`, we simply suppress the
error output for that part.
This fixes https://github.com/git-for-windows/git/issues/3260
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an object is already mentioned in a reachability bitmap we are
building, then by definition so are all of the objects it can reach. We
have an optimization to stop traversing commits when we see they are
already in the bitmap, but we don't do the same for trees.
It's generally unavoidable to recurse into trees for commits not yet
covered by bitmaps (since most commits generally do have unique
top-level trees). But they usually have subtrees that are shared with
other commits (i.e., all of the subtrees the commit _didn't_ touch). And
some of those commits (and their trees) may be covered by the bitmap.
Usually this isn't _too_ big a deal, because we'll visit those subtrees
only once in total for the whole walk. But if you have a large number of
unbitmapped commits, and if your tree is big, then you may end up
opening a lot of sub-trees for no good reason.
We can use the same optimization we do for commits here: when we are
about to open a tree, see if it's in the bitmap (either the one we are
building, or the "seen" bitmap which covers the UNINTERESTING side of
the bitmap when doing a set-difference).
This works especially well because we'll visit all commits before
hitting any trees. So even in a history like:
A -- B
if "A" has a bitmap on disk but "B" doesn't, we'll already have OR-ed in
the results from A before looking at B's tree (so we really will only
look at trees touched by B).
For most repositories, the timings produced by p5310 are unspectacular.
Here's linux.git:
Test HEAD^ HEAD
--------------------------------------------------------------------
5310.4: simulated clone 6.00(5.90+0.10) 5.98(5.90+0.08) -0.3%
5310.5: simulated fetch 2.98(5.45+0.18) 2.85(5.31+0.18) -4.4%
5310.7: rev-list (commits) 0.32(0.29+0.03) 0.33(0.30+0.03) +3.1%
5310.8: rev-list (objects) 1.48(1.44+0.03) 1.49(1.44+0.05) +0.7%
Any improvement there is within the noise (the +3.1% on test 7 has to be
noise, since we are not recursing into trees, and thus the new code
isn't even run). The results for git.git are likewise uninteresting.
But here are numbers from some other real-world repositories (that are
not public). This one's tree is comparable in size to linux.git, but has
~16k refs (and so less complete bitmap coverage):
Test HEAD^ HEAD
-------------------------------------------------------------------------
5310.4: simulated clone 38.34(39.86+0.74) 33.95(35.53+0.76) -11.5%
5310.5: simulated fetch 2.29(6.31+0.35) 2.20(5.97+0.41) -3.9%
5310.7: rev-list (commits) 0.99(0.86+0.13) 0.96(0.85+0.11) -3.0%
5310.8: rev-list (objects) 11.32(11.04+0.27) 6.59(6.37+0.21) -41.8%
And here's another with a very large tree (~340k entries), and a fairly
large number of refs (~10k):
Test HEAD^ HEAD
-------------------------------------------------------------------------
5310.3: simulated clone 53.83(54.71+1.54) 39.77(40.76+1.50) -26.1%
5310.4: simulated fetch 19.91(20.11+0.56) 19.79(19.98+0.67) -0.6%
5310.6: rev-list (commits) 0.54(0.44+0.11) 0.51(0.43+0.07) -5.6%
5310.7: rev-list (objects) 24.32(23.59+0.73) 9.85(9.49+0.36) -59.5%
This patch provides substantial improvements in these larger cases, and
have any drawbacks for smaller ones (the cost of the bitmap check is
quite small compared to an actual tree traversal).
Note that we have to add a version of revision.c's include_check
callback which handles non-commits. We could possibly consolidate this
into a single callback for all objects types, as there's only one user
of the feature which would need converted (pack-bitmap.c:should_include).
That would in theory let us avoid duplicating any logic. But when I
tried it, the code ended up much worse to read, with lots of repeated
"if it's a commit do this, otherwise do that". Having two separate
callbacks splits that naturally, and matches the existing split of
show_commit/show_object callbacks.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test clean-up.
* ab/test-lib-updates:
test-lib: split up and deprecate test_create_repo()
test-lib: do not show advice about init.defaultBranch under --verbose
test-lib: reformat argument list in test_create_repo()
submodule tests: use symbolic-ref --short to discover branch name
test-lib functions: add --printf option to test_commit
describe tests: convert setup to use test_commit
test-lib functions: add an --annotated option to "test_commit"
test-lib-functions: document test_commit --no-tag
test-lib-functions: reword "test_commit --append" docs
test-lib tests: remove dead GIT_TEST_FRAMEWORK_SELFTEST variable
test-lib: bring $remove_trash out of retirement
The "-m" option in "git log -m" that does not specify which format,
if any, of diff is desired did not have any visible effect; it now
implies some form of diff (by default "--patch") is produced.
* so/log-m-implies-p:
diff-merges: let "-m" imply "-p"
diff-merges: rename "combined_imply_patch" to "merges_imply_patch"
stash list: stop passing "-m" to "git log"
git-svn: stop passing "-m" to "git rev-list"
diff-merges: move specific diff-index "-m" handling to diff-index
t4013: test "git diff-index -m"
t4013: test "git diff-tree -m"
t4013: test "git log -m --stat"
t4013: test "git log -m --raw"
t4013: test that "-m" alone has no effect in "git log"
Optimize out repeated rename detection in a sequence of mergy
operations.
* en/ort-perf-batch-11:
merge-ort, diffcore-rename: employ cached renames when possible
merge-ort: handle interactions of caching and rename/rename(1to1) cases
merge-ort: add helper functions for using cached renames
merge-ort: preserve cached renames for the appropriate side
merge-ort: avoid accidental API mis-use
merge-ort: add code to check for whether cached renames can be reused
merge-ort: populate caches of rename detection results
merge-ort: add data structures for in-memory caching of rename detection
t6429: testcases for remembering renames
fast-rebase: write conflict state to working tree, index, and HEAD
fast-rebase: change assert() to BUG()
Documentation/technical: describe remembering renames optimization
t6423: rename file within directory that other side renamed
"git fetch" over protocol v2 left its side of the socket open after
it finished speaking, which unnecessarily wasted the resource on
the other side.
* jk/fetch-pack-v2-half-close-early:
fetch-pack: signal v2 server that we are done making requests
Use the hashfile API in the codepath that writes the index file to
reduce code duplication.
* ds/write-index-with-hashfile-api:
read-cache: delete unused hashing methods
read-cache: use hashfile instead of git_hash_ctx
csum-file.h: increase hashfile buffer size
hashfile: use write_in_full()
Recent "git clone" left a temporary directory behind when the
transport layer returned an failure.
* jk/clone-clean-upon-transport-error:
clone: clean up directory after transport_fetch_refs() failure
"git send-email" learned the "--sendmail-cmd" command line option
and the "sendemail.sendmailCmd" configuration variable, which is a
more sensible approach than the current way of repurposing the
"smtp-server" that is meant to name the server to instead name the
command to talk to the server.
* ga/send-email-sendmail-cmd:
git-send-email: add option to specify sendmail command
The code to handle the "--format" option in "for-each-ref" and
friends made too many string comparisons on %(atom)s used in the
format string, which has been corrected by converting them into
enum when the format string is parsed.
* zh/ref-filter-atom-type:
ref-filter: introduce enum atom_type
ref-filter: add objectsize to used_atom
Fix typos in documentation, code comments, and RelNotes which repeat
various words. In trivial cases, just delete the duplicated word and
rewrap text, if needed. Reword the affected sentence in
Documentation/RelNotes/1.8.4.txt for it to make sense.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not make sense to attempt to set MSGFMT_EXE when NO_GETTEXT is
configured, as such add a check for NO_GETTEXT before attempting to set
it.
Suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users have expressed interest in a more "batteries included" way of
building via CMake[1], and a big part of that is providing easier access
to tooling external tools.
A straightforward way to accomplish this is to make it as simple as
possible is to enable the generation of the compile_commands.json file,
which is supported by many tools such as: clang-tidy, clang-format,
sourcetrail, etc.
This does come with a small run-time overhead during the configuration
step (~6 seconds on my machine):
Time to configure with CMAKE_EXPORT_COMPILE_COMMANDS=TRUE
real 1m9.840s
user 0m0.031s
sys 0m0.031s
Time to configure with CMAKE_EXPORT_COMPILE_COMMANDS=FALSE
real 1m3.195s
user 0m0.015s
sys 0m0.015s
This seems like a small enough price to pay to make the project more
accessible to newer users. Additionally there are other large projects
like llvm [2] which has had this enabled by default for >6 years at the
time of this writing, and no real negative consequences that I can find
with my search-skills.
NOTE: That the compile_commands.json is currently produced only when
using the Ninja and Makefile generators. See The CMake documentation[3]
for more info.
1: https://lore.kernel.org/git/CAOjrSZusMSvs7AS-ZDsV8aQUgsF2ZA754vSDjgFKMRgi_oZAWw@mail.gmail.com/
2: 2c5712051b
3: https://cmake.org/cmake/help/latest/variable/CMAKE_EXPORT_COMPILE_COMMANDS.html
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When building on windows users have the option to use vcpkg to provide
the dependencies needed to compile. Previously, this was used only when
using the Visual Studio generator which was not ideal because:
- Not all users who want to use vcpkg use the Visual Studio
generators.
- Some versions of Visual Studio 2019 moved away from using the
VS 2019 generator by default, making it impossible for Visual
Studio to configure the project in the likely event that it couldn't
find the dependencies.
- Inexperienced users of CMake are very likely to get tripped up by
the errors caused by a lack of vcpkg, making the above bullet point
both annoying and hard to debug.
As such, let's make using vcpkg the default on windows. Users who want
to avoid using vcpkg can disable it by passing -DNO_VCPKG=TRUE.
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The multimail project is developed independently and has its own project
page. Traditionally, we shipped a copy in contrib/.
However, such a copy is prone to become stale, and users are much better
served to be directed to the actual project instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ibuf can be reused for multiple iterations of the loop. Specifically:
deflate() overwrites s.avail_in to show how much of the input buffer
has not been processed yet - and sometimes leaves 'avail_in > 0', in
which case ibuf will be processed again during the loop's subsequent
iteration.
But if we declare ibuf within the loop, then (in theory) we get a new
(and uninitialised) buffer for every iteration. In practice, my compiler
seems to resue the same buffer - meaning that this code does work - but
it doesn't seem safe to rely on this behaviour. MSAN correctly catches
this issue - as soon as we hit the 's.avail_in > 0' condition, we end up
reading from what seems to be uninitialised memory.
Therefore, we move ibuf out of the loop, making this reuse safe.
See MSAN output from t1050-large below - the interesting part is the
ibuf creation at the end, although there's a lot of indirection before
we reach the read from unitialised memory:
==11294==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x7f75db58fb1c in crc32_little crc32.c:283:9
#1 0x7f75db58d5b3 in crc32_z crc32.c:220:20
#2 0x7f75db59668c in crc32 crc32.c:242:12
#3 0x8c94f8 in hashwrite csum-file.c:101:15
#4 0x825faf in stream_to_pack bulk-checkin.c:154:5
#5 0x82467b in deflate_to_pack bulk-checkin.c:225:8
#6 0x823ff1 in index_bulk_checkin bulk-checkin.c:264:15
#7 0xa7cff2 in index_stream object-file.c:2234:9
#8 0xa7bff7 in index_fd object-file.c:2256:9
#9 0xa7d22d in index_path object-file.c:2274:7
#10 0xb3c8c9 in add_to_index read-cache.c:802:7
#11 0xb3e039 in add_file_to_index read-cache.c:835:9
#12 0x4a99c3 in add_files add.c:458:7
#13 0x4a7276 in cmd_add add.c:670:18
#14 0x4a1e76 in run_builtin git.c:461:11
#15 0x49e1e7 in handle_builtin git.c:714:3
#16 0x4a0c08 in run_argv git.c:781:4
#17 0x49d5a8 in cmd_main git.c:912:19
#18 0x7974da in main common-main.c:52:11
#19 0x7f75da66f349 in __libc_start_main (/lib64/libc.so.6+0x24349)
#20 0x421bd9 in _start start.S:120
Uninitialized value was stored to memory at
#0 0x7f75db58fa6b in crc32_little crc32.c:283:9
#1 0x7f75db58d5b3 in crc32_z crc32.c:220:20
#2 0x7f75db59668c in crc32 crc32.c:242:12
#3 0x8c94f8 in hashwrite csum-file.c:101:15
#4 0x825faf in stream_to_pack bulk-checkin.c:154:5
#5 0x82467b in deflate_to_pack bulk-checkin.c:225:8
#6 0x823ff1 in index_bulk_checkin bulk-checkin.c:264:15
#7 0xa7cff2 in index_stream object-file.c:2234:9
#8 0xa7bff7 in index_fd object-file.c:2256:9
#9 0xa7d22d in index_path object-file.c:2274:7
#10 0xb3c8c9 in add_to_index read-cache.c:802:7
#11 0xb3e039 in add_file_to_index read-cache.c:835:9
#12 0x4a99c3 in add_files add.c:458:7
#13 0x4a7276 in cmd_add add.c:670:18
#14 0x4a1e76 in run_builtin git.c:461:11
#15 0x49e1e7 in handle_builtin git.c:714:3
#16 0x4a0c08 in run_argv git.c:781:4
#17 0x49d5a8 in cmd_main git.c:912:19
#18 0x7974da in main common-main.c:52:11
#19 0x7f75da66f349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Uninitialized value was stored to memory at
#0 0x447eb9 in __msan_memcpy msan_interceptors.cpp:1558:3
#1 0x7f75db5c2011 in flush_pending deflate.c:746:5
#2 0x7f75db5cafa0 in deflate_stored deflate.c:1815:9
#3 0x7f75db5bb7d2 in deflate deflate.c:1005:34
#4 0xd80b7f in git_deflate zlib.c:244:12
#5 0x825dff in stream_to_pack bulk-checkin.c:140:12
#6 0x82467b in deflate_to_pack bulk-checkin.c:225:8
#7 0x823ff1 in index_bulk_checkin bulk-checkin.c:264:15
#8 0xa7cff2 in index_stream object-file.c:2234:9
#9 0xa7bff7 in index_fd object-file.c:2256:9
#10 0xa7d22d in index_path object-file.c:2274:7
#11 0xb3c8c9 in add_to_index read-cache.c:802:7
#12 0xb3e039 in add_file_to_index read-cache.c:835:9
#13 0x4a99c3 in add_files add.c:458:7
#14 0x4a7276 in cmd_add add.c:670:18
#15 0x4a1e76 in run_builtin git.c:461:11
#16 0x49e1e7 in handle_builtin git.c:714:3
#17 0x4a0c08 in run_argv git.c:781:4
#18 0x49d5a8 in cmd_main git.c:912:19
#19 0x7974da in main common-main.c:52:11
Uninitialized value was stored to memory at
#0 0x447eb9 in __msan_memcpy msan_interceptors.cpp:1558:3
#1 0x7f75db644241 in _tr_stored_block trees.c:873:5
#2 0x7f75db5cad7c in deflate_stored deflate.c:1813:9
#3 0x7f75db5bb7d2 in deflate deflate.c:1005:34
#4 0xd80b7f in git_deflate zlib.c:244:12
#5 0x825dff in stream_to_pack bulk-checkin.c:140:12
#6 0x82467b in deflate_to_pack bulk-checkin.c:225:8
#7 0x823ff1 in index_bulk_checkin bulk-checkin.c:264:15
#8 0xa7cff2 in index_stream object-file.c:2234:9
#9 0xa7bff7 in index_fd object-file.c:2256:9
#10 0xa7d22d in index_path object-file.c:2274:7
#11 0xb3c8c9 in add_to_index read-cache.c:802:7
#12 0xb3e039 in add_file_to_index read-cache.c:835:9
#13 0x4a99c3 in add_files add.c:458:7
#14 0x4a7276 in cmd_add add.c:670:18
#15 0x4a1e76 in run_builtin git.c:461:11
#16 0x49e1e7 in handle_builtin git.c:714:3
#17 0x4a0c08 in run_argv git.c:781:4
#18 0x49d5a8 in cmd_main git.c:912:19
#19 0x7974da in main common-main.c:52:11
Uninitialized value was stored to memory at
#0 0x447eb9 in __msan_memcpy msan_interceptors.cpp:1558:3
#1 0x7f75db5c8fcf in deflate_stored deflate.c:1783:9
#2 0x7f75db5bb7d2 in deflate deflate.c:1005:34
#3 0xd80b7f in git_deflate zlib.c:244:12
#4 0x825dff in stream_to_pack bulk-checkin.c:140:12
#5 0x82467b in deflate_to_pack bulk-checkin.c:225:8
#6 0x823ff1 in index_bulk_checkin bulk-checkin.c:264:15
#7 0xa7cff2 in index_stream object-file.c:2234:9
#8 0xa7bff7 in index_fd object-file.c:2256:9
#9 0xa7d22d in index_path object-file.c:2274:7
#10 0xb3c8c9 in add_to_index read-cache.c:802:7
#11 0xb3e039 in add_file_to_index read-cache.c:835:9
#12 0x4a99c3 in add_files add.c:458:7
#13 0x4a7276 in cmd_add add.c:670:18
#14 0x4a1e76 in run_builtin git.c:461:11
#15 0x49e1e7 in handle_builtin git.c:714:3
#16 0x4a0c08 in run_argv git.c:781:4
#17 0x49d5a8 in cmd_main git.c:912:19
#18 0x7974da in main common-main.c:52:11
#19 0x7f75da66f349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Uninitialized value was stored to memory at
#0 0x447eb9 in __msan_memcpy msan_interceptors.cpp:1558:3
#1 0x7f75db5ea545 in read_buf deflate.c:1181:5
#2 0x7f75db5c97f7 in deflate_stored deflate.c:1791:9
#3 0x7f75db5bb7d2 in deflate deflate.c:1005:34
#4 0xd80b7f in git_deflate zlib.c:244:12
#5 0x825dff in stream_to_pack bulk-checkin.c:140:12
#6 0x82467b in deflate_to_pack bulk-checkin.c:225:8
#7 0x823ff1 in index_bulk_checkin bulk-checkin.c:264:15
#8 0xa7cff2 in index_stream object-file.c:2234:9
#9 0xa7bff7 in index_fd object-file.c:2256:9
#10 0xa7d22d in index_path object-file.c:2274:7
#11 0xb3c8c9 in add_to_index read-cache.c:802:7
#12 0xb3e039 in add_file_to_index read-cache.c:835:9
#13 0x4a99c3 in add_files add.c:458:7
#14 0x4a7276 in cmd_add add.c:670:18
#15 0x4a1e76 in run_builtin git.c:461:11
#16 0x49e1e7 in handle_builtin git.c:714:3
#17 0x4a0c08 in run_argv git.c:781:4
#18 0x49d5a8 in cmd_main git.c:912:19
#19 0x7974da in main common-main.c:52:11
Uninitialized value was created by an allocation of 'ibuf' in the stack frame of function 'stream_to_pack'
#0 0x825710 in stream_to_pack bulk-checkin.c:101
SUMMARY: MemorySanitizer: use-of-uninitialized-value crc32.c:283:9 in crc32_little
Exiting
Signed-off-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When compiling with -O3, some gcc versions (10.2.1 here) complain about
an out-of-bounds subscript:
revision.c: In function ‘do_add_index_objects_to_pending’:
revision.c:321:22: error: array subscript [1, 2147483647] is outside array bounds of ‘char[1]’ [-Werror=array-bounds]
321 | if (0 < len && name[len] && buf.len)
| ~~~~^~~~~
The "len" parameter here comes from calling interpret_branch_name(),
which intends to return the number of characters of "name" it parsed.
But the compiler doesn't realize this. It knows the size of the empty
string "name" passed in from do_add_index_objects_to_pending(), but it
has no clue that the "len" we get back will be constrained to "0" in
that case.
And I don't think the warning is telling us about some subtle or clever
bug. The implementation of interpret_branch_name() is in another file
entirely, and the compiler can't see it (you can even verify there is no
clever LTO going on by replacing it with "return 0" and still getting
the warning).
We can work around this by replacing our "did we hit the trailing NUL"
subscript dereference with a length check. We do not even have to pay
the cost for an extra strlen(), as we can pass our new length into
interpret_branch_name(), which was converting our "0" into a call to
strlen() anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "path" parameter to ll_union_merge() is named "path_unused", since
we don't ourselves use it. But we do pass it to ll_xdl_merge(), which
may look at it (it gets passed to ll_binary_merge(), which may pass it
to warning()). Let's rename it to correct this inaccuracy (both of the
other functions correctly do not call this "unused").
Note that we also pass drv_unused, but it truly is unused by the rest of
the stack (it only exists at all to provide a generic interface that
matches what ll_ext_merge() needs).
Reported-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since cd1d61c44f (make union merge an xdl merge favor, 2010-03-01), we
pass NULL to ll_xdl_merge() for the "name" labels of the ancestor, ours
and theirs buffers. We usually use these for annotating conflict markers
left in a file. For a union merge, these shouldn't matter; the point of
it is that we'd never leave conflict markers in the first place.
But there is one code path where we may dereference them: if the file
contents appear to be binary, ll_binary_merge() will give up and pass
them to warning() to generate a message for the user (that was true even
when cd1d61c44f was written, though the warning was in ll_xdl_merge()
back then).
That can result in a segfault, though on many systems (including glibc),
the printf routines will helpfully just say "(null)" instead. We can
extend our binary-union test in t6406 to check stderr, which catches the
problem on all systems.
This also fixes a warning from "gcc -O3". Unlike lower optimization
levels, it inlines enough to see that the NULL can make it to warning()
and complains:
In function ‘ll_binary_merge’,
inlined from ‘ll_xdl_merge’ at ll-merge.c:115:10,
inlined from ‘ll_union_merge’ at ll-merge.c:151:9:
ll-merge.c:74:4: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
74 | warning("Cannot merge binary files: %s (%s vs. %s)",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
75 | path, name1, name2);
| ~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to commit a944af1d86 (merge: teach -Xours/-Xtheirs to binary
ll-merge driver, 2012-09-08), we always reported a conflict from
ll_binary_merge() by returning "1" (in the xdl_merge and ll_merge code,
this value is the number of conflict hunks). After that commit, we
report zero conflicts if the "variant" flag is set, under the assumption
that it is one of XDL_MERGE_FAVOR_OURS or XDL_MERGE_FAVOR_THEIRS.
But this gets confused by XDL_MERGE_FAVOR_UNION. We do not know how to
do a binary union merge, but erroneously report no conflicts anyway (and
just blindly use the "ours" content as the result).
Let's tighten our check to just the cases that a944af1d86 meant to
cover. This fixes the union case (which existed already back when that
commit was made), as well as future-proofing us against any other
variants that get added later.
Note that you can't trigger this from "git merge-file --union", as that
bails on binary files before even calling into the ll-merge machinery.
The test here uses the "union" merge attribute, which does erroneously
report a successful merge.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of "fast-forward" in the glossary has been updated.
* ry/clarify-fast-forward-in-glossary:
docs: improve fast-forward in glossary content
The parallel checkout codepath did not initialize object ID field
used to talk to the worker processes in a futureproof way.
* mt/parallel-checkout-with-padded-oidcpy:
parallel-checkout: send the new object_id algo field to the workers
We historically rejected a very short string as an author name
while accepting a patch e-mail, which has been loosened.
* ef/mailinfo-short-name:
mailinfo: don't discard names under 3 characters
The "heads" section on the gitweb summary page shows heads in
`-committerdate` order (ie. the most recently-modified ones at the
top), tie-breaking equal-dated refs using the implicit `refname` sort
fallback. This recency-based ordering appears in multiple places in the
UI, such as the project listing, the tags list, and even the
shortlog and log views.
Given two equal-dated refs, however, sorting the `HEAD` ref before
the non-`HEAD` ref provides more useful signal than merely sorting by
refname. For example, say we had "master" and "trunk" both pointing at
the same commit but "trunk" was `HEAD`, sorting "trunk" first helps
communicate its special status as the default branch that you'll check
out if you clone the repo.
Add `-HEAD` as a secondary sort key to the `git for-each-ref` call
in `git_get_heads_list()` to provide the desired behavior. The most
recently committed refs will appear first, but `HEAD`-ness will be used
as a tie-breaker. Note that `refname` is the implicit fallback sort key,
which means that two same-dated non-`HEAD` refs will continue to be
sorted in lexicographical order, as they are today.
Signed-off-by: Greg Hurrell <greg@hurrell.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some notes in the code about invariants with match_mask when adding
pairs. Also add a comment that seems to have been left out in my work
of pushing these changes upstream.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A random hodge-podge of incorrect or out-of-date comments that I found:
* t6423 had a comment that has referred to the wrong test for years;
fix it to refer to the right one.
* diffcore-rename had a FIXME comment meant to remind myself to
investigate if I could make another code change. I later
investigated and removed the FIXME, but while cherry-picking the
patch to submit upstream I missed the later update. Remove the
comment now.
* merge-ort had the early part of a comment for a function; I had
meant to include the more involved description when I updated the
function. Update the comment now.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The keys of break_idx are strings from the diff_filepairs of
diff_queued_diff. break_idx is only used in location_rename_dst(), and
that usage is always before any free'ing of the pairs (and thus the
strings in the pairs). As such, there is no need to strdup these keys;
we can just reuse the existing strings as-is.
The merge logic doesn't make use of break detection, so this does not
affect the performance of any of my testcases. It was just a minor
unrelated optimization noted in passing while looking at the code.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gathering accumulated times from trace2 output on the mega-renames
testcase, I saw the following timings (where I'm only showing a few
lines to highlight the portions of interest):
10.120 : label:incore_nonrecursive
4.462 : ..label:process_entries
3.143 : ....label:process_entries setup
2.988 : ......label:plist special sort
1.305 : ....label:processing
2.604 : ..label:collect_merge_info
2.018 : ..label:merge_start
1.018 : ..label:renames
In the above output, note that the 4.462 seconds for process_entries was
split as 3.143 seconds for "process_entries setup" and 1.305 seconds for
"processing" (and a little time for other stuff removed from the
highlight). Most of the "process_entries setup" time was spent on
"plist special sort" which corresponds to the following code:
trace2_region_enter("merge", "plist special sort", opt->repo);
plist.cmp = string_list_df_name_compare;
string_list_sort(&plist);
trace2_region_leave("merge", "plist special sort", opt->repo);
In other words, in a merge strategy that would be invoked by passing
"-sort" to either rebase or merge, sorting an array takes more time than
anything else. Serves me right for naming my merge strategy this way.
Rewrite the comparison function in a way that does not require finding
out the lengths of the strings when comparing them. While at it, tweak
the code for our specific case -- no need to handle a variety of modes,
for example. The combination of these changes reduced the time spent in
"plist special sort" by ~25% in the mega-renames case.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 5.622 s ± 0.059 s 5.235 s ± 0.042 s
mega-renames: 10.127 s ± 0.073 s 9.419 s ± 0.107 s
just-one-mega: 500.3 ms ± 3.8 ms 480.1 ms ± 3.9 ms
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Existing checks for scissors characters using memcmp(3) never read past
the end of the line, because all substrings we are interested in are two
characters long, and the outer loop guarantees we have at least one
character. So at most we will look at the NUL.
However, this is too subtle and may lead to bugs in code which copies
this behavior without realizing substring length requirement. So use
starts_with() instead, which will stop at NUL regardless of the length
of the prefix. Remove extra pair of parentheses while we are here.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change various cmd_* functions that claim to return an "int" to use
"return" instead of exit() to indicate an exit code. These were not
marked with NORETURN, and by directly exit()-ing we'll skip the
cleanup git.c would otherwise do (e.g. closing fd's, erroring if we
can't). See run_builtin() in git.c.
In the case of shell.c and sh-i18n--envsubst.c this was the result of
an incomplete migration to using a cmd_main() in 3f2e2297b9 (add an
extra level of indirection to main(), 2016-07-01).
This was spotted by SunCC 12.5 on Solaris 10 (gcc210 on the gccfarm).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option is almost never a good idea, as the resulting repository is
larger and slower (see the new explanations in the docs).
I outlined the potential problems. We could go further and make the
option harder to find (or at least, make the command-line option
descriptions a much more terse "you probably don't want this; see
pack.packsizeLimit for details"). But this seems like a minimal change
that may prevent people from thinking it's more useful than it is.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some test-cases, UTF-8 locale is required. To find such locale,
we're using the first available UTF-8 locale that returned by
"locale -a".
However, the locale(1) utility is unavailable on some systems,
e.g. Linux with musl libc.
However, without "locale -a", we can't guess provided UTF-8 locale.
Add a Makefile knob GIT_TEST_UTF8_LOCALE and activate it for
linux-musl in our CI system.
Rename t/lib-git-svn.sh:prepare_a_utf8_locale to prepare_utf8_locale,
since we no longer prepare the variable named "a_utf8_locale",
but set up a fallback value for GIT_TEST_UTF8_LOCALE instead.
The fallback will be LC_ALL, LANG environment variable,
or the first UTF-8 locale from output of "locale -a", in that order.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a01f7f2ba0 (merge: enable defaulttoupstream by default,
2014-04-20) forgot to mention the new default in the configuration
documentation.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There're two different default options for log --decorate:
* Should `--decorate` be given without any arguments, it's default to
`short`
* Should neither `--decorate` nor `--no-decorate` be given, it's default
to the `log.decorate` or `auto`.
We documented the former, but not the latter.
Let's document them, too.
Reported-by: Andy AO <zen96285@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The native kdiff3 mergetool is not found by git mergetool on
Windows. The message "The merge tool kdiff3 is not available as
'kdiff3'" is displayed.
Just like we translate the name of the binary and look for it on the
search path for WinMerge, do the same for kdiff3 to find it.
Signed-off-by: Michael Schindler michael@compressconsult.com
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The xdl_bug() function was introduced in
e8adf23d1e (xdl_change_compact(): introduce the concept of a change
group, 2016-08-22), let's use our usual BUG() function instead.
We'll now have meaningful line numbers if we encounter bugs in xdiff,
and less code duplication.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't guard the calls to the progress.c API with "if (progress)". The
API itself will check this. This doesn't change any behavior, but
makes this code consistent with the rest of the codebase.
See ae9af12287 (status: show progress bar if refreshing the index
takes too long, 2018-09-15) for the commit that added the pattern
we're changing here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a trailing newline to the protocol-caps.h file added in the recent
a2ba162cda (object-info: support for retrieving object info,
2021-04-20). Various editors add this implicitly, and some compilers
warn about the lack of a \n here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing spaces before '&&' and switch tabs around '&&' to spaces.
These issues were found using `git grep '[^ ]&&$'` and
`git grep -P '&&\t'`.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dash bug https://bugs.launchpad.net/ubuntu/+source/dash/+bug/139097
lets the shell erroneously perform field splitting on the expansion of a
command substitution during declaration of a local variable. It causes
the parallel-checkout tests to fail e.g. when running them with
/bin/dash on MacOS 11.4, where they error out like this:
./t2080-parallel-checkout-basics.sh: 33: local: 0: bad variable name
That's because the output of wc -l contains leading spaces and the
returned number of lines is treated as another variable to declare, i.e.
as in "local workers= 0".
Work around it by enclosing the command substitution in quotes.
Helped-by: Matheus Tavares Bernardino <matheus.bernardino@usp.br>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms, like NonStop do not automatically restart fsync()
when interrupted by a signal, even when that signal is setup with
SA_RESTART.
This can lead to test breakage, e.g., where "--progress" is used,
thus SIGALRM is sent often, and can interrupt an fsync() syscall.
Make sure we deal with such a case by retrying the syscall
ourselves. Luckily, we call fsync() fron a single wrapper,
fsync_or_die(), so the fix is fairly isolated.
Reported-by: Randall S. Becker <randall.becker@nexbridge.ca>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Taylor Blau <me@ttaylorr.com>
[jc: the above two did most of the work---I just tied the loose end]
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 87db61a (trace2: write discard message to sentinel files,
2019-10-04), we added a new "too_many_files" event for when trace2
logging would create too many files in an output directory.
Unfortunately, the api-trace2 doc described a "discard" event instead.
Fix the doc to use the correct event name.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-repack doc clearly states that it *does* operate on promisor
packfiles (in a separate partition), with "-a" specified. Presumably
the statements here are outdated, as they feature from the first doc
in 2017 (and the repack support was added in 2018)
Signed-off-by: Tao Klerks <tao@klerks.biz>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two "if (opt->all_objects)" blocks next
to each other, merge them into one to provide better
readability.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --batch code to print an object assumes we found out the type of
the object from calling oid_object_info_extended(). This is true for
the default format, but even in a custom format, we manually modify
the object_info struct to ask for the type.
This assumption was broken by 845de33a5b (cat-file: avoid noop calls
to sha1_object_info_extended, 2016-05-18). That commit skips the call
to oid_object_info_extended() entirely when --batch-all-objects is in
use, and the custom format does not include any placeholders that
require calling it.
Or when the custom format only include placeholders like %(objectname) or
%(rest), oid_object_info_extended() will not get the type of the object.
This results in an error when we try to confirm that the type didn't
change:
$ git cat-file --batch=batman --batch-all-objects
batman
fatal: object 000023961a changed type!?
and also has other subtle effects (e.g., we'd fail to stream a blob,
since we don't realize it's a blob in the first place).
We can fix this by flipping the order of the setup. The check for "do
we need to get the object info" must come _after_ we've decided
whether we need to look up the type.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent change to make git-completion.bash use $__git_cmd_idx
in more places broke a number of completions on zsh because it
modified __git_main but did not update __git_zsh_main.
Notably, completions for "add", "branch", "mv" and "push" were
broken as a result of this change.
In addition to the undefined variable usage, "git mv <tab>" also
prints the following error:
__git_count_arguments:7: bad math expression:
operand expected at `"1"'
_git_mv:[:7: unknown condition: -gt
Remove the quotes around $__git_cmd_idx in __git_count_arguments
and set __git_cmd_idx=1 early in __git_zsh_main to fix the
regressions from 59d85a2a05.
This was tested on zsh 5.7.1 (x86_64-apple-darwin19.0).
Suggested-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Acked-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Contributor for a new language must complete translations of a small set
of l10n messages.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Document the PO helper program (git-po-helper) with installation and
basic usage.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
All we need to know is that their names are the same.
Additionally this might be easier to parse for some since
remote_for_branch is more descriptive than remote_get(NULL).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a single line that is used in a single place, and the variable has
the same name as the function.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If fetch_remote is NULL (i.e. the branch remote is invalid), then it
can't possibly be same as remote, which can't be NULL.
The check is redundant, and so is the extra variable.
Also, fix the Yoda condition: we want to check if remote is the same as
the branch remote, not the other way around.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only override dst on the odd case.
This allows a preemptive break on the `simple` case.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Their code is much simpler now and can move into the parent function.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the setup_push_* functions are appending a refspec. Do this only
once on the parent function.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want all the cases that don't do anything with a branch first, and
then the rest. That way we will be able to get the branch and die if
there's a problem in the parent function, instead of inside the function
of each mode.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to break when nothing else will be executed.
Will help next patches.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code is duplicated among multiple functions.
No functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the code has been simplified and it's clear what it's
actually doing, update the documentation to reflect that.
Namely; the simple mode only barfs when working on a centralized
workflow, and there's no configured upstream branch with the same name.
Cc: Elijah Newren <newren@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's a safety check to make sure branch->refname isn't different
from branch->merge[0]->src, otherwise we die().
Therefore we always push to branch->refname.
Suggestions-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simply move the code around and remove dead code. In particular the
'!same_remote' conditional is a no-op since that part of the code is the
same_remote leg of the conditional beforehand.
No functional changes.
Suggestions-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to avoid doing unnecessary things and simplify it in further
patches. In particular moving the additional name safety out of
setup_push_upstream() and into setup_push_simple() and thus making both
more straightforward.
The code is copied exactly as-is; no functional changes.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`simple` is the most important mode so move the relevant code to its own
function to make it easier to see what it's doing.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The typical case is what git was designed for: distributed remotes.
It's only the atypical case--fetching and pushing to the same
remote--that we need to keep an eye on.
No functional changes.
Liked-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Packing refs (and therefore checking that certain refs are not packed)
is a property of the packed/loose ref storage. Add a comment to explain
what the test checks.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In reftable, hashes are correctly formed by design.
Split off test for git-log in empty repo.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given that git-maintenance simply calls out git-pack-refs, it seems superfluous
to test the functionality of pack-refs itself, as that is covered by
t3210-pack-refs.sh.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The packed/loose ref storage is an overlay combination of packed-refs (refs and
tags in a single file) and one-file-per-ref. This creates all kinds of edge
cases related to directory/file conflicts, (non-)empty directories, and the
locking scheme, none of which applies to reftable.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In reftable, there is no notion of a per-ref 'existence' of a reflog. Each
reflog entry has its own key, so it is not possible to distinguish between
{reflog doesn't exist,reflog exists but is empty}. This makes the logic
in log_ref_setup() (file refs/files-backend.c), which depends on the existence
of the reflog file infeasible.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test checks what happens if reflog and ref database disagree on the state of
the latest commit. This seems to require accessing reflog storage directly.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add extensive comment why this test needs a REFFILES annotation.
I tried forcing universal reflog creation with core.logAllRefUpdates=true, but
that apparently also doesn't cause reflogs to be created for pseudorefs
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
REFFILES can be used to mark tests that are specific to the packed/loose ref
storage format and its limitations. Marking such tests is a preparation for
introducing the reftable storage backend.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test checks that unreachable objects are really removed. For the test to
work, it has to ensure that no reflog retain any reachable objects.
Previously, it did this by manipulating the file system to remove reflog in the
first test, and relying on git not updating the reflog if the relevant logfile
doesn't exist in follow-up tests.
Now, explicitly clear the reflog using 'reflog expire'. This reduces the
dependency between test functions. It also is more amenable to use with
reftable, which has no concept of (non)-existence of a reflog
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the test independent of the particulars of the storage formats.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use symbolic-ref and rev-parse to inspect refs.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will print $ZERO_OID when asking for a non-existent ref from the
test-helper.
Since resolve-ref provides direct access to refs_resolve_ref_unsafe(), it
provides a reliable mechanism for accessing REFNAME, while avoiding the implicit
resolution to refs/heads/REFNAME.
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reftable will prohibit invalid hashes at the storage level, but
git-symbolic-ref can still create branches ending in ".lock".
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a warning on AIX's xlc compiler that's been emitted since my
a1aad71601 (fsck.h: use "enum object_type" instead of "int",
2021-03-28):
"builtin/fsck.c", line 805.32: 1506-068 (W) Operation between
types "int(*)(struct object*,enum object_type,void*,struct
fsck_options*)" and "int(*)(struct object*,int,void*,struct
fsck_options*)" is not allowed.
I.e. it complains about us assigning a function with a prototype "int"
where we're expecting "enum object_type".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This flag was introduced in 2477ab2e (diff: support anchoring line(s),
2017-11-27) but back then, the bash completion script did not learn
about the new flag. Add it.
Signed-off-by: Thomas Braun <thomas.braun@virtuell-zuhause.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optimize the startup time of git-send-email by using an amended
config_regexp() function to retrieve the list of config keys and
values we're interested in.
For boolean keys we can handle the [true|false] case ourselves, and
the "--get" case didn't need any parsing. Let's leave "--path" and
other "--bool" cases to "git config". I'm not bothering with the
"undef" or "" case (true and false, respectively), let's just punt on
those and others and have "git config --type=bool" handle it.
The "grep { defined } @values" here covers a rather subtle case. For
list values such as sendemail.to it is possible as with any other
config key to provide a plain "-c sendemail.to", i.e. to set the key
as a boolean true. In that case the Git::config() API will return an
empty string, but this new parser will correctly return "undef".
However, that means we can end up with "undef" in the middle of a
list. E.g. for sendemail.smtpserveroption in conjuction with
sendemail.smtpserver as a path this would have produce a warning. For
most of the other keys we'd behave the same despite the subtle change
in the value, e.g. sendemail.to would behave the same because
Mail::Address->parse() happens to return an empty list if fed
"undef". For the boolean values we were already prepared to handle
these variables being initialized as undef anyway.
This brings the runtime of "git send-email" from ~60-~70ms to a very
steady ~40ms on my test box. We now run just one "git config"
invocation on startup instead of 8, the exact number will differ based
on the local sendemail.* config. I happen to have 8 of those set.
This brings the runtime of t9001-send-email.sh from ~13s down to ~12s
for me. The change there is less impressive as many of those tests set
various config values, and we're also getting to the point of
diminishing returns for optimizing "git send-email" itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It has been pointed out[1] that cwd() invokes "pwd(1)" while getcwd()
is a Perl-native XS function. For what we're using these for we can
use getcwd().
The performance difference is miniscule, we're saving on the order of
a millisecond or so, see [2] below for the benchmark. I don't think
this matters in practice for optimizing git-send-email or perl
execution (unlike the patches leading up to this one).
But let's do it regardless of that, if only so we don't have to think
about this as a low-hanging fruit anymore.
1. https://lore.kernel.org/git/20210512180517.GA11354@dcvr/
2.
$ perl -MBenchmark=:all -MCwd -wE 'cmpthese(10000, { getcwd => sub { getcwd }, cwd => sub { cwd }, pwd => sub { system "pwd >/dev/null" }})'
(warning: too few iterations for a reliable count)
Rate pwd cwd getcwd
pwd 982/s -- -48% -100%
cwd 1890/s 92% -- -100%
getcwd 10000000000000000000/s 1018000000000000000% 529000000000000064% -
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of unconditionally requiring modules such as File::Spec, let's
only load them when needed. This speeds up code that only needs a
subset of the features Git.pm provides.
This brings a plain invocation of "git send-email" down from 52/37
loaded modules under NO_GETTEXT=[|Y] to 39/18, and it now takes
~60-~70ms instead of ~80-~90ms. The runtime of t9001-send-email.sh
test is down to ~13s from ~15s.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optimize the time git-send-email takes to do even the simplest of
things (such as serving up "-h") from around ~150ms to ~80ms-~90ms by
lazily loading the modules it requires.
Before this change Devel::TraceUse would report 99/97 used modules
under NO_GETTEXT=[|Y], respectively. Now it's 52/37. It now takes ~15s
to run t9001-send-email.sh, down from ~20s.
Changing File::Spec::Functions::{catdir,catfile} to invoking class
methods on File::Spec itself is idiomatic. See [1] for a more
elaborate explanation, the resulting code behaves the same way, just
without the now-pointless function wrapper.
1. http://lore.kernel.org/git/8735u8mmj9.fsf@evledraar.gmail.com
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change indirect object syntax such as "new X ARGS" to
"X->new(ARGS)". This allows perl to see what "new" is at compile-time
without having loaded Term::ReadLine. This doesn't matter now, but
will in a subsequent commit when we start lazily loading it.
Let's do the same for the adjacent "FakeTerm" package for consistency,
even though we're not going to conditionally load it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change calls like "__ 'foo'" to "__('foo')" so the Perl compiler
doesn't have to guess that "__" is a function. This makes the code
more readable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optimize git-send-email by only shelling out to "git var" if we need
to. This is easily done by re-inventing our own small version of
perl's Memoize module.
I suppose I could just use Memoize itself, but in a subsequent patch
I'll be micro-optimizing send-email's use of dependencies. Using
Memoize is a measly extra 5-10 milliseconds, but as we'll see that'll
end up mattering for us in the end.
This brings the runtime of a plain "send-email" from around ~160-170ms
to ~140m-150ms. The runtime of the tests is around the same, or around
~20s.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reduce the time it takes git-send-email to get to even the most
trivial of tasks (such as serving up its "-h" output) by first listing
config keys that exist, and only then only call e.g. "git config
--bool" on them if they do.
Over a lot of runs this speeds the time to "-h" up for me from ~250ms
to ~150ms, and the runtime of t9001-send-email.sh goes from ~25s to
~20s.
This introduces a race condition where we'll do the "wrong" thing if a
config key were to be inserted between us discovering the list and
calling read_config(), i.e. we won't know about the racily added
key. In theory this is a change in behavior, in practice it doesn't
matter.
The config_regexp() function being changed here was added in
dd84e528a3 (git-send-email: die if sendmail.* config is set,
2020-07-23) for use by git-send-email. So we can change its odd return
value in the case where no values are found by "git config". The
difference in the *.pm code would matter if it was invoked in scalar
context, but now it no longer is.
Arguably this caching belongs in Git.pm itself, but in lieu of
modifying it for all its callers let's only do this for "git
send-email". The other big potential win would be "git svn", but
unlike "git send-email" it doesn't check tens of config variables one
at a time at startup (in my brief testing it doesn't check any).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config_regexp() function was added in dd84e528a3 (git-send-email:
die if sendmail.* config is set, 2020-07-23) for use in
git-send-email, and it's the only in-tree user of it.
However, the consensus is that Git.pm is a public interface, so even
though it's a recently added function we can't change it. So let's
copy over a minimal version of it to git-send-email.perl itself. In a
subsequent commit it'll be changed further for our own use.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the removal of the support for sendemail.smtpssl in the preceding
commit the parsing of sendemail.smtpencryption is no longer special,
and can by moved to %config_settings.
This gets us rid of an unconditional call to Git::config(), which as
we'll see in subsequent commits matters for startup performance.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the already dead code to support "sendemail.smtpssl" by finally
removing the dead code supporting the configuration option.
In f6bebd121a (git-send-email: add support for TLS via
Net::SMTP::SSL, 2008-06-25) the --smtp-ssl command-line option was
documented as deprecated, later in 65180c6618 (List send-email config
options in config.txt., 2009-07-22) the "sendemail.smtpssl"
configuration option was also documented as such.
Then in in 3ff15040e2 (send-email: fix regression in
sendemail.identity parsing, 2019-05-17) I unintentionally removed
support for it by introducing a bug in read_config().
As can be seen from the diff context we've already returned unless
$enc i defined, so it's not possible for us to reach the "elsif"
branch here. This code was therefore already dead since Git v2.23.0.
So let's just remove it. We were already 11 years into a stated
deprecation period of this variable when 3ff15040e2 landed, now it's
around 13. Since it hasn't worked anyway for around 2 years it looks
like we can safely remove it.
The --smtp-ssl option is still deprecated, if someone cares they can
follow-up and remove that too, but unlike the config option that one
could still be in use in the wild. I'm just removing this code that's
provably unused already.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git.pm code does its own Perl-ifying of boolean variables, let's
ensure that empty values = true for boolean variables, as in the C
code.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for the "GIT_TEST_PERL_FATAL_WARNINGS=true" test mode to
"send-email". This was added to e.g. git-svn in 5338ed2b26 (perl:
check for perl warnings while running tests, 2020-10-21), but not
"send-email". Let's rectify that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the 'uploadpack.blobPackfileUri' description in packfile-uri.txt
and the correct format also can be seen in t5702.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently GNU make already removes files when catching an interruption
signal, however, in order to deal with other kinds of errors a
workaround is in place to store target output to a temporary file, and
only move it to its right place on success.
By enabling the built-in .DELETE_ON_ERROR we let make do this task, so
we don't have to.
This way the rules can be simplified a lot.
Suggested-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commits 50cff52f1a (When generating manpages, delete outdated targets
first., 2007-08-02) and f9286765b2 (Documentation/Makefile: remove
cmd-list.made before redirecting to it., 2007-08-06) created these rm
instances for a very rare corner-case: building as root by mistake.
It's odd to have workarounds here, but nowhere else in the Makefile--
which already fails in this stuation, starting from
Documentation/technical/.
We gain nothing but complexity, so let's remove them.
Comments-by: Jeff King <peff@peff.net>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
asciidoc needs asciidoc.conf, asciidoctor asciidoctor-extensions.rb.
Neither needs the other.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Despite that tar is available everywhere, it's not required by POSIX.
In our build system, users are allowed to specify which tar to be used
in Makefile knobs. Furthermore, GNU tar (gtar) is prefered when autotools
is being used.
In our testsuite, 7 out of 9 tar-required-tests use "$TAR", the other
two use "tar".
Let's change the remaining two tests to "$TAR".
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix long standing inconsistency between -c/--cc that do imply -p on
one side, and -m that did not imply -p on the other side.
Change corresponding test accordingly, as "log -m" output should now
match one from "log -m -p", rather than from just "log".
Change documentation accordingly.
NOTES:
After this patch
git log -m
produces diffs without need to provide -p as well, that improves both
consistency and usability. It gets even more useful if one sets
"log.diffMerges" configuration variable to "first-parent" to force -m
produce usual diff with respect to first parent only.
This patch, however, does not change behavior when specific diff
format is explicitly provided on the command-line, so that commands
like
git log -m --raw
git log -m --stat
are not affected, nor does it change commands where specific diff
format is active by default, such as:
git diff-tree -m
It's also worth to be noticed that exact historical semantics of -m is
still provided by --diff-merges=separate.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is refactoring change in preparation for the next commit that
will let -m imply -p.
The old name doesn't match the intention to let not only -c/-cc imply
-p, but also -m, that is not a "combined" format, so we rename the
flag accordingly.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Passing "-m" in "git log --first-parent -m" is not needed as
--first-parent implies --diff-merges=first-parent anyway. OTOH, it
will stop being harmless once we let "-m" imply "-p".
While we are at it, fix corresponding test description in t3903-stash
to match what it actually tests.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rev-list doesn't utilize -m. It happens to eat it silently, so this
bug went unnoticed.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move specific handling of "-m" for diff-index to diff-index.c, so
diff-merges is left to handle only diff for merges options.
Being a better design by itself, this is especially essential in
preparation for letting -m imply -p, as "diff-index -m" obviously
should not imply -p, as it's entirely unrelated.
To handle this, in addition to moving specific diff-index "-m" code
out of diff-merges, we introduce new
diff_merges_suppress_options_parsing()
and call it before generic options processing in cmd_diff_index().
This new diff_merges_suppress_options_parsing() could then be reused
and called before invocations of setup_revisions() for other commands
that don't need --diff-merges options, but that's outside of the scope
of these patch series.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
-m in "git diff-index" means "match missing", that differs
from its meaning in "git diff". Let's check it in diff-index.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to ensure we don't affect plumbing commands with our changes
of "-m" semantics, so add corresponding test.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is to ensure we won't break different diff formats when we start
to imply "-p" by "-m".
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is to ensure we won't break different diff formats when we start
to imply "-p" by "-m".
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is to notice current behavior that we are going to change when we
start to imply "-p" by "-m".
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Classic string concatenation while forgetting a space character.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor tr2_dst_try_uds_connect() to avoid a gcc warning[1] that
appears under -O3 (but not -O2). This makes the build pass under
DEVELOPER=1 without needing a DEVOPTS=no-error.
This can be reproduced with GCC Debian 8.3.0-6, but not e.g. with
clang 7.0.1-8+deb10u2. We've had this warning since
ee4512ed48 (trace2: create new combined trace facility, 2019-02-22).
As noted in [2] this warning happens because the compiler doesn't
assume that errno must be non-zero after a failed syscall.
Let's work around by using the well-established "saved_errno" pattern,
along with returning -1 ourselves instead of "errno". The caller can
thus rely on our "errno" on failure.
See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61846 for a related
bug report against GCC.
1.
trace2/tr2_dst.c: In function ‘tr2_dst_get_trace_fd.part.5’:
trace2/tr2_dst.c:296:10: warning: ‘fd’ may be used uninitialized in this function [-Wmaybe-uninitialized]
dst->fd = fd;
~~~~~~~~^~~~
trace2/tr2_dst.c:229:6: note: ‘fd’ was declared here
int fd;
^~
2. https://lore.kernel.org/git/20200404142131.GA679473@coredump.intra.peff.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there are many renames between the old base of a series of commits
and the new base, the way sequencer.c, merge-recursive.c, and
diffcore-rename.c have traditionally split the work resulted in
redetecting the same renames with each and every commit being
transplanted. To address this, the last several commits have been
creating a cache of rename detection results, determining when it was
safe to use such a cache in subsequent merge operations, adding helper
functions, and so on. See the previous half dozen commit messages for
additional discussion of this optimization, particularly the message a
few commits ago entitled "add code to check for whether cached renames
can be reused". This commit finally ties all of that work together,
modifying the merge algorithm to make use of these cached renames.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 5.665 s ± 0.129 s 5.622 s ± 0.059 s
mega-renames: 11.435 s ± 0.158 s 10.127 s ± 0.073 s
just-one-mega: 494.2 ms ± 6.1 ms 500.3 ms ± 3.8 ms
That's a fairly small improvement, but mostly because the previous
optimizations were so effective for these particular testcases; this
optimization only kicks in when the others don't. If we undid the
basename-guided rename detection and skip-irrelevant-renames
optimizations, then we'd see that this series by itself improved
performance as follows:
Before Basename Series After Just This Series
no-renames: 13.815 s ± 0.062 s 5.697 s ± 0.080 s
mega-renames: 1799.937 s ± 0.493 s 205.709 s ± 0.457 s
Since this optimization kicks in to help accelerate cases where the
previous optimizations do not apply, this last comparison shows that
this cached-renames optimization has the potential to help signficantly
in cases that don't meet the requirements for the other optimizations to
be effective.
The changes made in this optimization also lay some important groundwork
for a future optimization around having collect_merge_info() avoid
recursing into subtrees in more cases.
However, for this optimization to be effective, merge_switch_to_result()
should only be called when the rebase or cherry-pick operation has
either completed or hit a case where the user needs to resolve a
conflict or edit the result. If it is called after every commit, as
sequencer.c does, then the working tree and index are needlessly updated
with every commit and the cached metadata is tossed, defeating this
optimization. Refactoring sequencer.c to only call
merge_switch_to_result() at the end of the operation is a bigger
undertaking, and the practical benefits of this optimization will not be
realized until that work is performed. Since `test-tool fast-rebase`
only updates at the end of the operation, it was used to obtain the
timings above.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As documented in Documentation/technical/remembering-renames.txt, and as
tested for in the two testcases in t6429 with "rename same file
identically" in their description, there is one case where we need to
have renames in one commit NOT be cached for the next commit in our
rebase sequence -- namely, rename/rename(1to1) cases. Rather than
specifically trying to uncache those and fix up dir_rename_counts() to
match (which would also be valid but more work), we simply disable the
optimization when this really rare type of rename occurs.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we have a usable rename cache, then we can remove from
relevant_sources all the paths that were cached;
diffcore_rename_extended() can then consider an even smaller set of
relevant_sources in its rename detection.
However, when diffcore_rename_extended() is done, we will need to take
the renames it detected and then add back in all the ones we had cached
from before.
Add helper functions for doing these two operations; the next commit
will make use of them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous commits created an in-memory cache of the results of rename
detection, and added logic to detect when that cache could appropriately
be used in a subsequent merge operation -- but we were still
unconditionally clearing the cache with each new merge operation anyway.
If it is valid to reuse the cache from one of the two sides of history,
preserve that side.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, callers of the merge-ort API could have passed an
uninitialized value for struct merge_result *result. However, we want
to check result to see if it has cached renames from a previous merge
that we can reuse; such values would be found behind result->priv.
However, if result->priv is uninitialized, attempting to access behind
it will give a segfault. So, we need result->priv to be NULL (which
will be the case if the caller does a memset(&result, 0)), or be written
by a previous call to the merge-ort machinery. Documenting this
requirement may help, but despite being the person who introduced this
requirement, I still missed it once and it did not fail in a very clear
way and led to a long debugging session.
Add a _properly_initialized field to merge_result; that value will be
0 if the caller zero'ed the merge_result, it will be set to a very
specific value by a previous run by the merge-ort machinery, and if it's
uninitialized it will most likely either be 0 or some value that does
not match the specific one we'd expect allowing us to throw a much more
meaningful error.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to know when renames detected in a previous merge operation can
be reused in a later merge operation. Consider the following setup
(from the git-rebase manpage):
A---B---C topic
/
D---E---F---G master
After rebasing, this will appear as:
A'--B'--C' topic
/
D---E---F---G master
Further, let's say that 'oldfile' was renamed to 'newfile' between E
and G. The rebase or cherry-pick of A onto G will involve a three-way
merge between E (as the merge base) and G and A. After detecting the
rename between E:oldfile and G:newfile, there will be a three-way
content merge of the following:
E:oldfile
G:newfile
A:oldfile
and produce a new result:
A':newfile
Now, when we want to pick B onto A', we will need to do a three-way
merge between A (as the merge-base) and A' and B. This will involve
a three-way content merge of
A:oldfile
A':newfile
B:oldfile
but only if we can detect that A:oldfile is similar enough to A':newfile
to be used together in a three-way content merge, i.e. only if we can
detect that A:oldfile and A':newfile are a rename. But we already know
that A:oldfile and A':newfile are similar enough to be used in a
three-way content merge, because that is precisely where A':newfile came
from in the previous merge.
Note that A & A' both appear in both merges. That gives us the
condition under which we can reuse renames.
There are a couple important points about this optimization:
- If the rebase or cherry-pick halts for user conflicts, these caches
are NOT saved anywhere. Thus, resuming a halted rebase or
cherry-pick will result in no reused renames for the next commit.
This is intentional, as user resolution can change files
significantly and in ways that violate the similarity assumptions
here.
- Technically, in a *very* narrow case this might give slightly
different results for rename detection. Using the example above,
if:
* E:oldfile had 20 lines
* G:newfile added 10 new lines at the beginning of the file
* A:oldfile deleted all but the first three lines of the file
then
=> A':newfile would have 13 lines, 3 of which matches those
in A:oldfile.
Consider the two cases:
* Without this optimization:
- the next step of the rebase operation (moving B to B')
would not detect the rename betwen A:oldfile and A':newfile
- we'd thus get a modify/delete conflict with the rebase
operation halting for the user to resolve, and have both
A':newfile and B:oldfile sitting in the working tree.
* With this optimization:
- the rename between A:oldfile and A':newfile would be detected
via the cache of renames
- a three-way merge between A:oldfile, A':newfile, and B:oldfile
would commence and be written to A':newfile
Now, is the difference in behavior a bug...or a bugfix? I can't
tell. Given that A:oldfile and A':newfile are not very similar,
when we three-way merge with B:oldfile it seems likely we'll hit a
conflict for the user to resolve. And it shouldn't be too hard for
users to see why we did that three-way merge; oldfile and newfile
*were* renames somewhere in the sequence. So, most of these corner
cases will still behave similarly -- namely, a conflict given to the
user to resolve. Also, consider the interesting case when commit B
is a clean revert of commit A. Without this optimization, a rebase
could not both apply a weird patch like A and then immediately
revert it; users would be forced to resolve merge conflicts. With
this optimization, it would successfully apply the clean revert.
So, there is certainly at least one case that behaves better. Even
if it's considered a "difference in behavior", I think both behaviors
are reasonable, and the time savings provided by this optimization
justify using the slightly altered rename heuristics.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fill in cache_pairs, cached_target_names, and cached_irrelevant based on
rename detection results. Future commits will make use of these values.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there are many renames between the old base of a series of commits
and the new base for a series of commits, the sequence of merges
employed to transplant those commits (from a cherry-pick or rebase
operation) will repeatedly detect the exact same renames. This is
wasted effort.
Add data structures which will be used to cache rename detection
results, along with the initialization and deallocation of these data
structures. Future commits will populate these caches, detect the
appropriate circumstances when they can be used, and employ them to
avoid re-detecting the same renames repeatedly.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will soon be adding an optimization that caches (in memory only,
never written to disk) upstream renames during a sequence of merges such
as occurs during a cherry-pick or rebase operation. Add several tests
meant to stress such an implementation to ensure it does the right
thing, and include a test whose outcome we will later change due to this
optimization as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, when fast-rebase hit a conflict, it simply aborted and left
HEAD, the index, and the working tree where they were before the
operation started. While fast-rebase does not support restarting from a
conflicted state, write the conflicted state out anyway as it gives us a
way to see what the conflicts are and write tests that check for them.
This will be important in the upcoming commits, because sequencer.c is
only superficially integrated with merge-ort.c; in particular, it calls
merge_switch_to_result() after EACH merge instead of only calling it at
the end of all the sequence of merges (or when a conflict is hit). This
not only causes needless updates to the working copy and index, but also
causes all intermediate data to be freed and tossed, preventing caching
information from one merge to the next. However, integrating
sequencer.c more deeply with merge-ort.c is a big task, and making this
small extension to fast-rebase.c provides us with a simple way to test
the edge and corner cases that we want to make sure continue working.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
assert() can succinctly document expectations for the code, and do so in
a way that may be useful to future folks trying to refactor the code and
change basic assumptions; it allows them to more quickly find some
places where their violations of previous assumptions trips things up.
Unfortunately, assert() can surround a function call with important
side-effects, which is a huge mistake since some users will compile with
assertions disabled. I've had to debug such mistakes before in other
codebases, so I should know better. Luckily, this was only in test
code, but it's still very embarrassing. Change an assert() to an if
(...) BUG (...).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remembering renames on the upstream side of history in an early merge of
a rebase or cherry-pick for re-use in a latter merge of the same
operation makes pretty good intuitive sense. However, trying to show
that it doesn't cause some subtle behavioral difference or some funny
edge or corner case is much more involved. And, in fact, it does
introduce a subtle behavioral change.
Document all the assumptions, special cases, and logic involved in such
an optimization, and describe why this optimization is safe under the
current optimizations/features/etc. -- even when the subtle behavioral
change is triggered.
Part of the point of adding this document that goes over the
optimization in such laborious detail, is that it is possible that
significant future changes (optimizations or feature changes) could
interact with this optimization in interesting ways; this document is
here to help folks making big changes sanity check that the assumptions
and arguments underlying this optimization are still valid. (As a side
note, creating this document forced me to review things in sufficient
detail that I found I was not properly caching directory-rename-induced
renames, resulting in the code not being aware of those renames and
causing unnecessary diffcore_rename_extended() calls in subsequent
merges.)
A subsequent commit will add several testcases based on this document
meant to stress-test the implementation and also document the case with
the subtle behavioral change.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current documentation for color.pager is technically correct, but
slightly misleading and doesn't really clarify the purpose of the
variable. As explained in the original thread which added it:
https://lore.kernel.org/git/E1G6zPH-00062L-Je@moooo.ath.cx/
the point is to deal with pagers that don't understand colors. And hence it
being set to "true" is necessary for colorizing output to the pager, but
not sufficient by itself (you must also have enabled one of the other
color options, though note that these are set to "auto" by default these
days).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Find typos in "po/TEAMS" file using the "git-po-helper" program. These
typos were introduced from commit v2.24.0-1-g9917eca794 (l10n: zh_TW:
add translation for v2.24.0, 2019-11-20 19:14:22 +0800).
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Use -1 as error return value throughout.
This removes spurious differences in the GIT_TRACE_REFS output, depending on the
ref storage backend active.
Before, the cached ref_iterator (but only that iterator!) would return
peel_object() output directly. No callers relied on the peel_status values
beyond success/failure. All calls to these functions go through
peel_iterated_oid(), which returns peel_object() as a fallback, but also
squashing the error values.
The iteration interface already passes REF_ISSYMREF and REF_ISBROKEN through the
flags argument, so the additional error values in enum peel_status provide no
value.
The ref iteration interface provides a separate peel() function because certain
formats (eg. packed-refs and reftable) can store the peeled object next to the
tag SHA1. Passing the peeled SHA1 as an optional argument to each_ref_fn maps
more naturally to the implementation of ref databases. Changing the code in this
way is left for a future refactoring.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching with the v0 protocol over ssh (or a local upload-pack with
pipes), the server closes the connection as soon as it is finished
sending the pack. So even though the client may still be operating on
the data via index-pack (e.g., resolving deltas, checking connectivity,
etc), the server has released all resources.
With the v2 protocol, however, the server considers the ssh session only
as a transport, with individual requests coming over it. After sending
the pack, it goes back to its main loop, waiting for another request to
come from the client. As a result, the ssh session hangs around until
the client process ends, which may be much later (because resolving
deltas, etc, may consume a lot of CPU).
This is bad for two reasons:
- it's consuming resources on the server to leave open a connection
that won't see any more use
- if something bad happens to the ssh connection in the meantime (say,
it gets killed by the network because it's idle, as happened in a
real-world report), then ssh will exit non-zero, and we'll propagate
the error up the stack.
The server is correct here not to hang up after serving the pack. The v2
protocol's design is meant to allow multiple requests like this, and
hanging up would be the wrong thing for a hypothetical client which was
planning to make more requests (though in practice, the git.git client
never would, and I doubt any other implementations would either).
The right thing is instead for the client to signal to the server that
it's not interested in making more requests. We can do that by closing
the pipe descriptor we use to write to ssh. This will propagate to the
server upload-pack as an EOF when it tries to read the next request (and
then it will close its half, and the whole connection will go away).
It's important to do this "half duplex" shutdown, because we have to do
it _before_ we actually receive the pack. This is an artifact of the way
fetch-pack and index-pack (or unpack-objects) interact. We hand the
connection off to index-pack (really, a sideband demuxer which feeds
it), and then wait until it returns. And it doesn't do that until it has
resolved all of the deltas in the pack, even though it was done reading
from the server long before.
So just closing the connection fully after index-pack returns would be
too late; we'd have held it open much longer than was necessary. And
teaching index-pack to close the connection is awkward. It's not even
seeing the whole conversation (the sideband demuxer is, but it doesn't
actually know what's in the packets, or when the end comes).
Note that this close() is happening deep within the transport code. It's
possible that a caller would want to perform other operations over the
same ssh transport after receiving the pack. But as of the current code,
none of the callers do, and there haven't been discussions of any plans
to change this. If we need to support that later, we can probably do so
by passing down a flag for "you're the last request on the transport;
it's OK to close" instead of the code just assuming that's true.
The description above all discusses v2 ssh, so it's worth thinking about
how this interacts with other protocols:
- in v0 protocols, we could do the same half-duplex shutdown (it just
goes into the v0 do_fetch_pack() instead). This does work, but since
it doesn't have the same persistence problem in the first place,
there's little reason to change it at this point.
- local fetches against git-upload-pack on the same machine will
behave the same as ssh (they are talking over two pipes, and see EOF
on their input pipe)
- fetches against git-daemon will run this same code, and close one of
the descriptors. In practice, this won't do anything, since there
our two descriptors are dups of each other, and not part of a
half-duplex pair. The right thing would probably be to call
shutdown(SHUT_WR) on it. I didn't bother with that here. It doesn't
face the same error-code problem (since it's just a TCP connection),
so it's really only an optimization problem. And git:// is not that
widely used these days, and has less impact on server resources than
an ssh termination.
- v2 http doesn't suffer from this problem in the first place, as our
pipes terminate at a local git-remote-https, which is passing data
along as individual requests via curl. Probably curl is keeping the
TCP/TLS connection open for more requests, and we might be able to
tell it manually "hey, we are done making requests now". But I think
that's much less important. It again doesn't suffer from the
error-code problem, and HTTP keepalive is pretty well understood
(importantly, the timeouts can be set low, because clients like curl
know how to reconnect for subsequent requests if necessary). So it's
probably not worth figuring out how to tell curl that we're done
(though if we do, this patch is probably the first step anyway;
fetch-pack closes the pipe back to remote-https, which would be the
signal that it should tell curl we're done).
The code is pretty straightforward. We close the pipe at the right
moment, and set it to -1 to mark it as invalid. I modified the later
cleanup code to avoid calling close(-1). That's not strictly necessary,
since close(-1) is a noop, but hopefully makes things a bit more obvious
to a reader.
I suspect that trying to call more transport functions after the close()
(e.g., calling transport_fetch_refs() again) would fail, as it's not
smart enough to realize we need to re-open the ssh connection. But
that's already true when v0 is in use. And no current callers want to do
that (and again, the solution is probably a flag in the transport code
to keep things open, which can be added later).
There's no test here, as the situation it covers is inherently racy (the
question is when upload-pack exits, compared to when index-pack finishes
resolving deltas and exits). The rather gross shell snippet below does
recreate the problematic situation; when run on a sufficiently-large
repository (git.git works fine), it kills an "idle" upload-pack while
the client is resolving deltas, leading to a failed clone.
(
git clone --no-local --progress . foo.git 2>&1
echo >&2 "clone exit code=$?"
) |
tr '\r' '\n' |
while read line
do
case "$done,$line" in
,Resolving*)
echo "hit resolving deltas; killing upload-pack"
killall -9 git-upload-pack
done=t
;;
esac
done
Reported-by: Greg Pflaum <greg.pflaum@pnp-hcl.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clone started respecting errors from the transport subsystem in
aab179d937 (builtin/clone.c: don't ignore transport_fetch_refs() errors,
2020-12-03). However, that commit didn't handle the cleanup of the
filesystem quite right.
The cleanup of the directory that cmd_clone() creates is done by an
atexit() handler, which we control with a flag. It starts as
JUNK_LEAVE_NONE ("clean up everything"), then progresses to
JUNK_LEAVE_REPO when we know we have a valid repo but not working tree,
and then finally JUNK_LEAVE_ALL when we have a successful checkout.
Most errors cause us to die(), which then triggers the handler to do the
right thing based on how far into cmd_clone() we got. But the checks
added by aab179d937 instead set the "err" variable and then jump to a
new "cleanup" label, which then returns our non-zero status. However,
the code after the cleanup label includes setting the flag to
JUNK_LEAVE_ALL, and so we accidentally leave the repository and working
tree in place.
One obvious option to fix this is to reorder the end of the function to
set the flag first, before cleanup code, and put the label between them.
But we can observe another small bug: the error return from
transport_fetch_refs() is generally "-1", and we propagate that to the
return value of cmd_clone(), which ultimately becomes the exit code of
the process. And we try to avoid transmitting negative values via exit
codes (only the low 8 bits are passed along as an unsigned value, though
in practice for "-1" this at least retains the property that it's
non-zero).
Instead, let's just die(). That makes us consistent with rest of the
code in the function. It does add a new "fatal:" line to the output, but
I'd argue that's a good thing:
- in the rare case that the transport code didn't say anything, now
the user gets _some_ error message
- even if the transport code said something like "error: ssh died of
signal 9", it's nice to also say "fatal" to indicate that we
considered that to be a show-stopper.
Triggering this in the test suite turns out to be surprisingly
difficult. Almost every error we'd encounter, including ones deep inside
the transport code, cause us to just die() right there! However, one way
is to put a fake wrapper around git-upload-pack that sends the complete
packfile but exits with a failure code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The text was somewhat confusing between the revision itself and the author.
Signed-off-by: Reuven Yagel <robi@post.jce.ac.il>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These methods were marked as MAYBE_UNUSED in the previous change to
avoid a complicated diff. Delete them entirely, since we now use the
hashfile API instead of this custom hashing code.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The do_write_index() method in read-cache.c has its own hashing logic
and buffering mechanism. Specifically, the ce_write() method was
introduced by 4990aadc (Speed up index file writing by chunking it
nicely, 2005-04-20) and similar mechanisms were introduced a few months
later in c38138cd (git-pack-objects: write the pack files with a SHA1
csum, 2005-06-26). Based on the timing, in the early days of the Git
codebase, I figured that these roughly equivalent code paths were never
unified only because it got lost in the shuffle. The hashfile API has
since been used extensively in other file formats, such as pack-indexes,
multi-pack-indexes, and commit-graphs. Therefore, it seems prudent to
unify the index writing code to use the same mechanism.
I discovered this disparity while trying to create a new index format
that uses the chunk-format API. That API uses a hashfile as its base, so
it is incompatible with the custom code in read-cache.c.
This rewrite is rather straightforward. It replaces all writes to the
temporary file with writes to the hashfile struct. This takes care of
many of the direct interactions with the_hash_algo.
There are still some git_hash_ctx uses remaining: the extension headers
are hashed for use in the End of Index Entries (EOIE) extension. This
use of the git_hash_ctx is left as-is. There are multiple reasons to not
use a hashfile here, including the fact that the data is not actually
writing to a file, just a hash computation. These hashes do not block
our adoption of the chunk-format API in a future change to the index, so
leave it as-is.
The internals of the algorithms are mostly identical. Previously, the
hashfile API used a smaller 8KB buffer instead of the 128KB buffer from
read-cache.c. The previous change already unified these sizes.
There is one subtle point: we do not pass the CSUM_FSYNC to the
finalize_hashfile() method, which differs from most consumers of the
hashfile API. The extra fsync() call indicated by this flag causes a
significant peformance degradation that is noticeable for quick
commands that write the index, such as "git add". Other consumers can
absorb this cost with their more complicated data structure
organization, and further writing structures such as pack-files and
commit-graphs is rarely in the critical path for common user
interactions.
Some static methods become orphaned in this diff, so I marked them as
MAYBE_UNUSED. The diff is much harder to read if they are deleted during
this change. Instead, they will be deleted in the following change.
In addition to the test suite passing, I computed indexes using the
previous binaries and the binaries compiled after this change, and found
the index data to be exactly equal. Finally, I did extensive performance
testing of "git update-index --force-write" on repos of various sizes,
including one with over 2 million paths at HEAD. These tests
demonstrated less than 1% difference in behavior. As expected, the
performance should be considered unchanged. The previous changes to
increase the hashfile buffer size from 8K to 128K ensured this change
would not create a peformance regression.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hashfile API uses a hard-coded buffer size of 8KB and has ever since
it was introduced in c38138c (git-pack-objects: write the pack files
with a SHA1 csum, 2005-06-26). It performs a similar function to the
hashing buffers in read-cache.c, but that code was updated from 8KB to
128KB in f279894 (read-cache: make the index write buffer size 128K,
2021-02-18). The justification there was that do_write_index() improves
from 1.02s to 0.72s. Since our end goal is to have the index writing
code use the hashfile API, we need to unify this buffer size to avoid a
performance regression.
There is a buffer, 'check_buffer', that is used to verify the check_fd
file descriptor. When this buffer increases to 128K to fit the data
being flushed, it causes the stack to overflow the limits placed in the
test suite. To avoid issues with stack size, move both 'buffer' and
'check_buffer' to be heap pointers within 'struct hashfile'. The
'check_buffer' member is left as NULL unless check_fd is set in
hashfd_check(). Both buffers are cleared as part of finalize_hashfile()
which also frees the full structure.
Since these buffers are now on the heap, we can adjust their size based
on the needs of the consumer. In particular, callers to
hashfd_throughput() are expecting to report progress indicators as the
buffer flushes. These callers would prefer the smaller 8k buffer to
avoid large delays between updates, especially for users with slower
networks. When the progress indicator is not used, the larger buffer is
preferrable.
By adding a new trace2 region in the chunk-format API, we can see that
the writing portion of 'git multi-pack-index write' lowers from ~1.49s
to ~1.47s on a Linux machine. These effects may be more pronounced or
diminished on other filesystems. The end-to-end timing is too noisy to
have a definitive change either way.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The xsize_t helper aims to safely convert an off_t to a size_t,
erroring out when a file offset is too large to fit into a memory
address. It does this by using two casts:
size_t size = (size_t) len;
if (len != (off_t) size)
... error out ...
On a platform with sizeof(size_t) < sizeof(off_t), this check is safe
and correct. The first cast truncates to a size_t by finding the
remainder modulo SIZE_MAX+1 (see C99 section 6.3.1.3 Signed and
unsigned integers) and the second promotes to an off_t, meaning the
result is true if and only if len is representable as a size_t.
On other platforms, this two-casts strategy still works well (always
succeeds) for len >= 0. But for len < 0, when the first cast succeeds
and produces SIZE_MAX + 1 + len, the resulting value is too large to
be represented as an off_t, so the second cast produces implementation
defined behavior. In practice, it is likely to produce a result of
true despite len not being representable as size_t.
Simplify by replacing with a more straightforward check: compare len
to the relevant bounds and then cast it. (To avoid a -Wsign-compare
warning, after checking that len >= 0, we explicitly convert to a
sufficiently-large unsigned type before comparing to SIZE_MAX.)
In practice, this is not likely to come up since typical callers use
nonnegative len. Still, it's helpful to handle this case to make the
behavior easy to reason about.
Historical note: the original bounds-checking in 46be82dfd0 (xsize_t:
check whether we lose bits, 2010-07-28) did not produce this
implementation-defined behavior, though it still did not handle
negative offsets. It was not until 73560c793a (git-compat-util.h:
xsize_t() - avoid -Wsign-compare warnings, 2017-09-21) introduced the
double cast that the implementation-defined behavior was triggered.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes new people are confused by how a revision "range" works,
in that it is not a random collection of commits but a set of
commits that are all connected to each other, and most Git commands
work on a single such "range".
Give an example to clarify it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The flush() logic in csum-file.c was introduced originally by c38138c
(git-pack-objects: write the pack files with a SHA1 csum, 2005-06-26)
and a portion of the logic performs similar utility to write_in_full()
in wrapper.c. The history of write_in_full() is full of moves and
renames, but was originally introduced by 7230e6d (Add write_or_die(), a
helper function, 2006-08-21).
The point of these sections of code are to flush a write buffer using
xwrite() and report errors in the case of disk space issues or other
generic input/output errors. The logic in flush() can interpret the
output of write_in_full() to provide the correct error messages to
users.
The logic in the hashfile API has an additional set of logic to augment
the progress indicator between calls to xwrite(). This was introduced by
2a128d6 (add throughput display to git-push, 2007-10-30). It seems that
since the hashfile's buffer is only 8KB, these additional progress
indicators might not be incredibly necessary. Instead, update the
progress only when write_in_full() complete.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An object_id storing a SHA-1 name has some unused bytes at the end of
the hash array. Since these bytes are not used, they are usually not
initialized to any value either. However, at
parallel_checkout.c:send_one_item() the object_id of a cache entry is
copied into a buffer which is later sent to a checkout worker through a
pipe write(). This makes Valgrind complain about passing uninitialized
bytes to a syscall. The worker won't use these uninitialized bytes
either, but the warning could confuse someone trying to debug this code;
So instead of using oidcpy(), send_one_item() uses hashcpy() to only
copy the used/initialized bytes of the object_id, and leave the
remaining part with zeros.
However, since cf0983213c ("hash: add an algo member to struct
object_id", 2021-04-26), using hashcpy() is no longer sufficient here as
it won't copy the new algo field from the object_id. Let's add and use a
new function which meets both our requirements of copying all the
important object_id data while still avoiding the uninitialized bytes,
by padding the end of the hash array in the destination object_id. With
this change, we also no longer need the destination buffer from
send_one_item() to be initialized with zeros, so let's switch from
xcalloc() to xmalloc() to make this clear.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These error messages are intended for the user. Let's touch them up
since we're here from the previous commit.
Signed-off-by: Wolfgang Müller <wolf@oriole.systems>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Eliminated 'Negation of emptiness' of 'nenhum' (not one/none)
* Eliminated 'Negation of emptiness' of 'nada' (nothing)
* Transformed 'Não' (No) into affirmative
* Some other translations
* Transforming 'não' (no) into affirmative
* From junção-de-3 to tri-junção
Signed-off-by: Daniel Santos <hello@brighterdan.com>
Clarify the default length used for the abbreviated form used for
commits in git describe.
The behavior was modified in Git 2.11.0, but the documentation was not
updated to clarify the new behavior.
Signed-off-by: Anders Höckersten <anders@hockersten.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sendemail.smtpServer configuration option and --smtp-server command
line option both support using a sendmail-like program to send emails by
specifying an absolute file path. However, this is not ideal for the
following reasons:
1. It overloads the meaning of smtpServer (now a program is being used
for the server?)
2. It doesn't allow for non-absolute paths, arguments, or arbitrary
scripting
Requiring an absolute path is bad for portability, as the same program
may be in different locations on different systems. If a user wishes to
pass arguments to their program, they have to use the smtpServerOption
option, which is cumbersome (as it must be repeated for each option) and
doesn't adhere to normal git conventions.
Introduce a new configuration option sendemail.sendmailCmd as well as a
command line option --sendmail-cmd that can be used to specify a command
(with or without arguments) or shell expression to run to send email.
The name of this option is consistent with --to-cmd and --cc-cmd. This
invocation honors the user's $PATH so that absolute paths are not
necessary. Arbitrary shell expressions are also supported, allowing
users to do basic scripting.
Give this option a higher precedence over --smtp-server and
sendemail.smtpServer, as the new interface is more flexible. For
backward compatibility, continue to support absolute paths in
--smtp-server and sendemail.smtpServer.
Signed-off-by: Gregory Anders <greg@gpanders.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These strings have not been modified in any translation, nor should they
be.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the original ref-filter design, it will copy the parsed
atom's name and attributes to `used_atom[i].name` in the
atom's parsing step, and use it again for string matching
in the later specific ref attributes filling step. It use
a lot of string matching to determine which atom we need.
Introduce the enum "atom_type", each enum value is named
as `ATOM_*`, which is the index of each corresponding
valid_atom entry. In the first step of the atom parsing,
`used_atom.atom_type` will record corresponding enum value
from valid_atom entry index, and then in specific reference
attribute filling step, only need to compare the value of
the `used_atom[i].atom_type` to check the atom type.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the support for "objectsize:disk" was bolted onto the
existing support for "objectsize", it didn't follow the
usual pattern for handling "atomtype:modifier", which reads
the <modifier> part just once while parsing the format
string, and store the parsed result in the union in the
used_atom structure, so that the string form of it does not
have to be parsed over and over at runtime (e.g. in
grab_common_values()).
Add a new member `objectsize` to the union `used_atom.u`,
so that we can separate the check of <modifier> from the
check of <atomtype>, this will bring scalability to atom
`%(objectsize)`.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a subshell added in a preceding commit to instead use a new
"-C" option to "check_describe". The idiom for this is copied as-is
from the "test_commit" function in test-lib-functions.sh
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a nested invocation of "test_expect_success", the
"check_describe()" function is a wrapper for calling
test_expect_success, and therefore needs to be called outside the body
of another "test_expect_success".
The two tests added in 30b1c7ad9d (describe: don't abort too early
when searching tags, 2020-02-26) were not testing for anything due to
this logic error. Without this fix reverting the C code changes in
that commit still has all tests passing, with this fix we're actually
testing the "describe" output. This is because "test_expect_success"
calls "test_finish_", whose last statement happens to be true.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the one test that relied on the "err.actual" file produced by
check_describe() to instead do its own check of "git describe"
output.
This means that the two tests won't have an inter-dependency (e.g. if
the earlier test is skipped).
An earlier version of this patch instead asserted that no other test
had any output on stderr. We're not doing that here out of fear that
"gc --auto" or another future change to "git describe" will cause it
to legitimately emit output on stderr unexpectedly[1].
I'd think that inverting the test added in 3291fe4072 (Add
git-describe test for "verify annotated tag names on output",
2008-03-03) to make checking that we don't have warnings the rule
rather than the exception would be the sort of thing the describe
tests should be catching, but for now let's leave it as it is.
1. http://lore.kernel.org/git/xmqqwnuqo8ze.fsf@gitster.c.googlers.com
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the glob matching via a "case" statement to a "test_cmp" after
we've stripped out the hash-specific g<hash-abbrev>
suffix. 5312ab11fb (Add describe test., 2007-01-13).
This means that we can use test_cmp to compare the output. I could
omit the "-8" change of e.g. "A-*" to "A-8-gHASH", but I think it
makes sense to test that here explicitly. It means you need to add new
tests to the bottom of the file, but that's not a burden in this case.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve tests added in 9f67d2e827 (Teach "git describe" --dirty
option, 2009-10-21) and 2ed5c8e174 (describe: setup working tree for
--dirty, 2019-02-03) so that they make sense in combination with each
other.
The "check_describe" being removed here was the earlier test, we then
later added these --work-tree tests which really just wanted to check
if we got the exact same output from "describe", but the test wasn't
structured to test for that.
Let's change it to do that, which both improves test coverage and
makes it more obvious what's going on here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the dummy discard_hunk_line() function added in
3b40a090fd (diff: avoid generating unused hunk header lines,
2018-11-02) in favor of having a new XDL_EMIT_NO_HUNK_HDR flag, for
use along with the two existing and similar XDL_EMIT_* flags.
Unlike the recently amended xdiff_emit_line_fn interface which'll be
called in a loop in xdl_emit_diff(), the hunk header is only emitted
once.
It makes more sense to pass this as a flag than provide a dummy
callback because that function may be able to skip doing certain work
if it knows the caller is doing nothing with the hunk header.
It would be possible to do so in the case of -U0 now, but the benefit
of doing so is so small that I haven't bothered. But this leaves the
door open to that, and more importantly makes the API use more
intuitive.
The reason we're putting a flag in the gap between 1<<0 and 1<<2 is
that the old 1<<1 flag was removed in 907681e940 (xdiff: drop
XDL_EMIT_COMMON, 2016-02-23) without re-ordering the remaining flags.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend the code added in 611e42a598 (xdiff: provide a separate emit
callback for hunks, 2018-11-02) to be more readable by using
designated initializers.
This changes "priv" in rerere.c to be initialized to NULL as we did in
merge-tree.c. That's not needed as we'll only use it if the callback
is defined, but being consistent here is better and less verbose.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of special-casing creations and deletions let's just generate
a diff for them.
This logic of not running a diff under -G if we don't have both sides
dates back to the original implementation of -S in
52e9578985 ([PATCH] Introducing software archaeologist's tool
"pickaxe"., 2005-05-21).
In the case of -S we were not working with the xdiff interface and
needed to do this, but when -G was implemented in f506b8e8b5 (git
log/diff: add -G<regexp> that greps in the patch text, 2010-08-23)
this logic was diligently copied over.
But as the performance test added earlier in this series shows, this
does not make much of a difference. With:
time GIT_TEST_LONG= GIT_PERF_REPEAT_COUNT=10 GIT_PERF_MAKE_OPTS='-j8 CFLAGS=-O3' ./run origin/next HEAD~ HEAD -- p4209-pickaxe.sh
With the HEAD~ commit being the preceding "pickaxe -G: terminate early
on matching lines" we get these results. Note that it's only the -G
codepaths that are relevant to this change:
Test origin/next HEAD~ HEAD
-----------------------------------------------------------------------------------------------------------------------------------------
4209.1: git log -S'int main' <limit-rev>.. 0.35(0.32+0.03) 0.35(0.33+0.02) +0.0% 0.35(0.30+0.05) +0.0%
4209.2: git log -S'æ' <limit-rev>.. 0.46(0.42+0.04) 0.46(0.41+0.05) +0.0% 0.46(0.42+0.04) +0.0%
4209.3: git log --pickaxe-regex -S'(int|void|null)' <limit-rev>.. 0.65(0.62+0.02) 0.64(0.61+0.02) -1.5% 0.64(0.60+0.04) -1.5%
4209.4: git log --pickaxe-regex -S'if *\([^ ]+ & ' <limit-rev>.. 0.52(0.45+0.06) 0.52(0.50+0.01) +0.0% 0.54(0.47+0.04) +3.8%
4209.5: git log --pickaxe-regex -S'[àáâãäåæñøùúûüýþ]' <limit-rev>.. 0.39(0.34+0.05) 0.39(0.34+0.04) +0.0% 0.39(0.36+0.03) +0.0%
4209.6: git log -G'(int|void|null)' <limit-rev>.. 0.60(0.55+0.04) 0.58(0.54+0.03) -3.3% 0.58(0.49+0.08) -3.3%
4209.7: git log -G'if *\([^ ]+ & ' <limit-rev>.. 0.61(0.52+0.06) 0.59(0.53+0.05) -3.3% 0.59(0.54+0.05) -3.3%
4209.8: git log -G'[àáâãäåæñøùúûüýþ]' <limit-rev>.. 0.61(0.51+0.07) 0.58(0.54+0.04) -4.9% 0.57(0.51+0.06) -6.6%
4209.9: git log -i -S'int main' <limit-rev>.. 0.36(0.31+0.04) 0.36(0.34+0.02) +0.0% 0.35(0.32+0.03) -2.8%
4209.10: git log -i -S'æ' <limit-rev>.. 0.36(0.33+0.03) 0.39(0.34+0.01) +8.3% 0.36(0.32+0.03) +0.0%
4209.11: git log -i --pickaxe-regex -S'(int|void|null)' <limit-rev>.. 0.83(0.77+0.05) 0.82(0.77+0.05) -1.2% 0.80(0.75+0.04) -3.6%
4209.12: git log -i --pickaxe-regex -S'if *\([^ ]+ & ' <limit-rev>.. 0.67(0.61+0.03) 0.64(0.61+0.03) -4.5% 0.63(0.61+0.02) -6.0%
4209.13: git log -i --pickaxe-regex -S'[àáâãäåæñøùúûüýþ]' <limit-rev>.. 0.40(0.37+0.02) 0.40(0.37+0.03) +0.0% 0.40(0.36+0.04) +0.0%
4209.14: git log -i -G'(int|void|null)' <limit-rev>.. 0.58(0.51+0.07) 0.59(0.52+0.06) +1.7% 0.58(0.52+0.05) +0.0%
4209.15: git log -i -G'if *\([^ ]+ & ' <limit-rev>.. 0.60(0.54+0.05) 0.60(0.54+0.06) +0.0% 0.60(0.56+0.03) +0.0%
4209.16: git log -i -G'[àáâãäåæñøùúûüýþ]' <limit-rev>.. 0.58(0.51+0.06) 0.57(0.52+0.05) -1.7% 0.60(0.48+0.09) +3.4%
This small simplification really doesn't buy us much now, but I've got
plans to both convert the pickaxe code to using a PCREv2 backend[1]
and to implement additional pickaxe modes to do custom searches
through the diff[2]. Always having the diff available under -G is
going to help to simplify both of those changes.
1. https://lore.kernel.org/git/20210203032811.14979-22-avarab@gmail.com/
2. https://lore.kernel.org/git/20190424152215.16251-3-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Solve a long-standing item for "git log -Grx" of us e.g. finding "+
str" in the diff context and noting that we had a "hit", but xdiff
diligently continuing to generate and spew the rest of the diff at
us. This makes use of a new "early return" xdiff interface added by
preceding commits.
The TODO item (or, the NEEDSWORK comment) has been there since "git
log -G" was implemented. See f506b8e8b5 (git log/diff: add -G<regexp>
that greps in the patch text, 2010-08-23).
But now with the support added in the preceding changes to the
xdiff-interface we can return early. Let's assert the behavior of that
new early-return xdiff-interface by having a BUG() call here to die if
it ever starts handing us needless work again.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finish the change started in the preceding commit and allow an early
return from "xdiff_emit_line_fn" callbacks, this will allows
diffcore-pickaxe.c to save itself redundant work.
Our xdiff interface also had the limitation of not being able to abort
early since the beginning, see d9ea73e056 (combine-diff: refactor
built-in xdiff interface., 2006-04-05). Although at that time
"xdiff_emit_line_fn" was called "xdiff_emit_consume_fn", and
"xdiff_emit_hunk_fn" didn't exist yet.
There was some work in this area of xdiff-interface.[ch] recently with
3b40a090fd (diff: avoid generating unused hunk header lines,
2018-11-02) and 7c61e25fbf (diff: use hunk callback for word-diff,
2018-11-02).
In combination those two changes allow us to not do any work on the
hunks and diff at all, but didn't change the status quo with regards
to consumers that e.g. want the diff lines, but might want to abort
early.
Whereas now we can abort e.g. on the first "-line" of a 1000 line diff
if that's all we needed.
This interface is rather scary as noted in the comment to
xdiff-interface.h being added here, as noted there a future change
could add more exit codes, and hack xdl_emit_diff() and friends to
ignore or skip things more selectively as a result.
I did not see an inherent reason for why xdl_emit_{diffrec,record}()
could not be changed to ferry the "xdiff_emit_line_fn" error code
upwards instead of returning -1 on all "ret < 0".
But doing so would require corresponding changes in xdl_emit_diff(),
xdl_diff(). I didn't see any issue with narrowly doing that to
accomplish what I needed here, but it would leave xdiff's own return
values in an inconsistent state.
Instead I've left it at returning a more conventional (for git's own
codebase) 1 for an early return, and translating it (or rather, all
non-zero) to -1 for xdiff's consumption.
The reason for most of the "stop" complexity in xdiff_outf() is
because we want to be able to abort early, but do so in a way that
doesn't skip the appropriate strbuf_reset() invocations.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the function prototype of xdiff_emit_line_fn to return an "int"
instead of "void". Change all of those functions to "return 0",
nothing checks those return values yet, and no behavior is being
changed.
In subsequent commits the interface will be changed to allow early
return via this new return value.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the "log -S<pat>" switch counts occurrences of <pat> on the
pre-image and post-image of a change. As soon as we know we had e.g. 1
before and 2 now we can stop, we don't need to keep counting past 2.
With this change a diff between A and B may have different performance
characteristics than between B and A. That's OK in this case, since
we'll emit the same output, and the effect is to make one of them
better.
I'm picking a check of "one" first on the assumption that it's a more
common case to have files grow over time than not.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the {one,two}_contains variables to c{1,2}. This will make a
follow-up change easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a bug in the matching routine powering -S<rx> --pickaxe-regex so
that we won't abort early on content that has NULs in it.
We've had a hard requirement on REG_STARTEND since 2f8952250a (regex:
add regexec_buf() that can work on a non NUL-terminated string,
2016-09-21), but this sanity check dates back to d01d8c6782 (Support
for pickaxe matching regular expressions, 2006-03-29).
It wasn't needed anymore, and as the now-passing test shows, actively
getting in our way. Since we always require REG_STARTEND support we do
not need to stop at NULs. If we are dealing with a haystack with NUL
in it. The needle may be behind that NUL.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Assert early in diffcore_pickaxe() that we've got a needle to work
with under -G and -S.
This code is redundant to the check -G and -S get from
parse-options.c's get_arg(), which I'm adding a test for.
This check dates back to e1b161161d (diffcore-pickaxe: fix infinite
loop on zero-length needle, 2007-01-25) when "git log -S" could send
this code into an infinite loop.
It was then later refactored in 8fa4b09fb1 (pickaxe: hoist empty
needle check, 2012-10-28) into its current form, but it seemingly
wasn't noticed that in the meantime a move to the parse-options.c API
in dea007fb4c (diff: parse separate options like -S foo, 2010-08-05)
had made it redundant.
Let's retain some of the paranoia here with a BUG(), but there's no
need to be checking this in the pickaxe_match() inner loop.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's hard to read this codepath at a glance and reason about exactly
what combination of -G and -S will compile either regexes or kwset,
and whether we'll then dispatch to "diff_grep" or "has_changes".
Then in the "--find-object" case we aren't using the callback
function, but were previously passing down "has_changes".
Refactor this code to exhaustively check "opts", it's now more obvious
what callback function (or none) we want under what mode.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test for the -G and -S pickaxe options and related options.
This test supports being run with GIT_TEST_LONG=1 to adjust the limit
on the number of commits from 1k to 10k. The 1k limit seems to hit a
good spot on git.git
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor contains() to do its assignments at the same time that it
does its declarations.
This code could have been refactored in ef90ab66e8 (pickaxe: use
textconv for -S counting, 2012-10-28) when a function call between the
declarations and assignments was removed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the pickaxe and pickaxe_opts fields next to each other again. In
a past life they'd been on adjacent lines, but when they got moved
from a global variable to the diff_options struct in 6b5ee137e5 (Diff
clean-up., 2005-09-21) they got split apart.
That split made sense at the time, the "char*" and "int" (flags)
options were being grouped, but we've long since abandoned that
pattern in the diff_options struct, and now it makes more sense to
group these together again.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Neither the --pickaxe-all documentation nor --find-object's has ever
suggested that you can combine the two. See f506b8e8b5 (git log/diff:
add -G<regexp> that greps in the patch text, 2010-08-23) and
15af58c1ad (diffcore: add a pickaxe option to find a specific blob,
2018-01-04).
But we've silently tolerated it, which makes the logic in
diffcore_pickaxe() harder to reason about. Let's assert that we won't
have the two combined.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the -G and --pickaxe-regex options are combined we simply ignore
the --pickaxe-regex option. Let's die instead as suggested by our
documentation, since -G is always a regex.
When --pickaxe-regex was added in d01d8c6782 (Support for pickaxe
matching regular expressions, 2006-03-29) only the -S option
existed. Then when -G was added in f506b8e8b5 (git log/diff: add
-G<regexp> that greps in the patch text, 2010-08-23) neither the
documentation for --pickaxe-regex was updated accordingly, nor was
something like this assertion added.
Since 5bc3f0b567 (diffcore-pickaxe doc: document -S and -G properly,
2013-05-31) we've claimed that --pickaxe-regex should only be used
with -S, but have silently tolerated combining it with -G, let's die
instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a missing test for --no-pickaxe-regex. This has been an error ever
since before the -S or -G options were added, or since
7ae0b0cb65 (git-log (internal): more options., 2006-03-01).
The reason for adding this test is that Junio suggested in [1] in
response to a later test addition in this series that it might be good
to support --no-pickaxe-regex in combination with -G. This would allow
for fixed-string searching with -G, similr to grep's --fixed-strings
mode.
I agree that that would make sense if anyone would like to implement
it, but since it dies right now let's first add this test to assert
the existing long-standing behavior. We can always add support for
--[no-]pickaxe-regex in combination with -G at some later date.
1. http://lore.kernel.org/git/xmqqwnto9pt7.fsf@gitster.g
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test for the options sanity check added in 5e505257f2 (diff:
properly error out when combining multiple pickaxe options,
2018-01-04).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No test in our test suite checked for "log -S<pat>" being a fixed
string, as opposed to "log -S<pat> --pickaxe-regex". Let's test for
it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In diffgrep_consume() we generate a diff, and then advance past the
"+" or "-" at the start of the line for matching. This has been done
ever since the code was added in f506b8e8b5 (git log/diff: add
-G<regexp> that greps in the patch text, 2010-08-23).
If we match "line" instead of "line + 1" no tests fail, i.e. we've got
zero coverage for whether any of our searches match the beginning of
the line or not. Let's add a test for this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the existing tests added in e0e7cb8080 (log -G: ignore
binary files, 2018-12-14) to use the --append option I added in
3373518cc8 (test-lib functions: add an --append option to
test_commit, 2021-01-12) and the --printf option added as part of an
in-flight topic of mine this commit depends on.
While I'm at it change some of the setup of the test to use a more
sensible pattern, e.g. setting up a temporary repo instead of creating
an orphan branch.
Since the -G and -S options will behave the same way with truncated
and removed content also change the "git rm" to emptying data.bin,
that's just catering to how test_commit works. The resulting test is
shorter.
See also f5d79bf7dd (tests: refactor a few tests to use "test_commit
--append", 2021-01-12) for prior similar refactoring.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The kwset optimization has not been used by grep since
48de2a768c (grep: remove the kwset optimization, 2019-07-01).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove various redundant or obsolete code from the test_create_repo()
function, and split up its use in test-lib.sh from what tests need
from it.
This leave us with a pass-through wrapper for "git init" in
test-lib-functions.sh, in test-lib.sh we have the same, except for
needing to redirect stdout/stderr, and emitting an error ourselves if
it fails. We don't need to error() ourselves when test_create_repo()
is invoked, as the invocation will be a part of a test's "&&"-chain.
Everything below this paragraph is a detailed summary of the history
of test_create_repo() explaining why it's safe to remove the various
things it was doing:
1. "mkdir -p" isn't needed because "git init" itself will create
leading directories if needed.
2. Since we're now a simple wrapper for "git init" we don't need to
check that we have only one argument. If someone wants to run
"test_create_repo --bare x" that's OK.
3. We won't ever hit that "Cannot setup test environment"
error.
Checking the test environment sanity when doing "git init" dates
back to eea420693b (t0000: catch trivial pilot errors.,
2005-12-10) and 2ccd2027b0 (trivial: check, if t/trash directory
was successfully created, 2006-01-05).
We can also see it in another form a bit later in my own
0d314ce834 (test-lib: use subshell instead of cd $new && .. && cd
$old, 2010-08-30).
But since 2006f0adae (t/test-lib: make sure Git has already been
built, 2012-09-17) we already check if we have a built git
earlier.
The one thing this was testing after that 2012 change was that
we'd just built "git", but not "git-init", but since
3af4c7156c (tests: respect GIT_TEST_INSTALLED when initializing
repositories, 2018-11-12) we invoke "git", not "git-init".
So all of that's been checked already, and we don't need to
re-check it here.
4. We don't need to move .git/hooks out of the way.
That dates back to c09a69a83e (Disable hooks during tests.,
2005-10-16), since then hooks became disabled by default in
f98f8cbac0 (Ship sample hooks with .sample suffix, 2008-06-24).
So the hooks were already disabled by default, but as can be seen
from "mkdir .git/hooks" changes various tests needed to re-setup
that directory. Now they no longer do.
This makes us implicitly depend on the default hooks being
disabled, which is a good thing. If and when we'd have any
on-by-default hooks (I see no reason we ever would) we'd want to
see the subtle and not so subtle ways that would break the test
suite.
5. We don't need to "cd" to the "$repo" directory at all anymore.
In the code being removed here we both "cd"'d to the repository
before calling "init", and did so in a subshell.
It's not important to do either, so both of those can be
removed. We cd'd because this code grew from test-lib.sh code
where we'd have done so already, see eedf8f97e5 (Abstract
test_create_repo out for use in tests., 2006-02-17), and later
"cd"'d inside a subshell since 0d314ce834 to avoid having to keep
track of an "old pwd" variable to cd back after the setup.
Being in the repository directory made moving the hooks around
easier (we wouldn't have to fully qualify the path). Since we're
not moving the hooks per #4 above we don't need to "cd" for that
reason either.
6. We can drop the --template argument and instead rely on the
GIT_TEMPLATE_DIR set to the same path earlier in test-lib.sh. See
8683a45d66 (Introduce GIT_TEMPLATE_DIR, 2006-12-19)
7. We only needed that ">&3 2>&4" redirection when invoked from
test-lib.sh.
We could still invoke test_create_repo() there, but as the
invocation is now trivial and we don't have a good reason to use
test_create_repo() elsewhere let's call "git init" there
ourselves.
8. We didn't need to resolve "git" as
"${GIT_TEST_INSTALLED:-$GIT_EXEC_PATH}/git$X" in test_create_repo(),
even for the use of test-lib.sh
PATH is already set up in test-lib.sh to start with
GIT_TEST_INSTALLED and/or GIT_EXEC_PATH before
test_create_repo() (now "git init") is called.. So we can simply
run "git" and rely on the PATH lookup choosing the right
executable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Arrange for the advice about naming the initial branch not to be shown
in the --verbose output of the test suite.
Since 675704c74d (init: provide useful advice about
init.defaultBranch, 2020-12-11) some tests have been very chatty with
repeated occurrences of this multi-line advice. Having it be this
verbose isn't helpful for anyone in the context of git's own test
suite, and it makes debugging tests that use their own "git init"
invocations needlessly distracting.
By setting the GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME variable early in
test-lib.sh itself we'll squash the warning not only for
test_create_repo(), as 675704c74d explicitly intended, but also for
other "git init" invocations.
And once we'd like to have this configuration set for all "git init"
invocations in the test suite we can get rid of the init.defaultBranch
configuration setting in test_create_repo(), as
repo_default_branch_name() in refs.c will take the GIT_TEST_* variable
over it being set.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reformat an argument list changed in 675704c74d (init: provide useful
advice about init.defaultBranch, 2020-12-11) to have the "-c" on the
same line as the argument it sets. This whitespace-only change makes
it easier to review a subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a use of $GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME added in
704fed9ea2 (tests: start moving to a different default main branch
name, 2020-10-23) to simply discover the initial branch name of a
repository set up in this function with "symbolic-ref --short".
That's something done in another test in 704fed9ea2, so doing it like
this seems like an omission, or rather an overly eager
search/replacement instead of fixing the test logic.
There are only three uses of the GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
variable in the test suite, this gets rid of one of those.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --printf option to test_commit to allow writing to the file with
"printf" instead of "echo".
This is useful for writing "\n", "\0" etc., in particular in
combination with the --append option added in 3373518cc8 (test-lib
functions: add an --append option to test_commit, 2021-01-12).
I'm converting a few tests to use the new option rather than a manual
printf/add/commit combination to demonstrate its usefulness. While I'm
at it use "test_create_repo" where appropriate, and give the
first/second commit a meaningful/more conventional log message in
cases where no test cared about that message.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the setup of the describe tests to use test_commit when
possible. This makes use of the new --annotate option to test_commit.
Some of the setup here could simply be removed since the data being
created wasn't important to any of the subsequent tests, so I've done
so. E.g. assigning to the "one" variable was always useless, and just
checking that we can describe HEAD after the first commit wasn't
useful.
In the case of the "two" variable we could instead use the tag we just
created. See 5312ab11fb (Add describe test., 2007-01-13) for the
initial version of this code. There's other cases here like redundant
"test_tick" invocations, or the simplification of not echoing "X" to a
file we're about to tag as "x", now we just use "x" in both cases.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an --annotated option to test_commit to create annotated tags. The
tag will share the same message as the commit, and we'll call
test_tick before creating it (unless --notick) is provided.
There's quite a few tests that could be simplified with this
construct. I've picked one to convert in this change as a
demonstration.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 76b8b8d05c (test-lib functions: document arguments to test_commit,
2021-01-12) I added missing documentation to test_commit, but in less
than a month later in 3803a3a099 (t: add --no-tag option to
test_commit, 2021-02-09) we got another undocumented option. Let's fix
that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reword the documentation for "test_commit --append" added in my
3373518cc8 (test-lib functions: add an --append option to test_commit,
2021-01-12).
A follow-up commit will make the "echo" part of this configurable, and
in any case saying "echo >>" rather than ">>" was redundant.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop setting the GIT_TEST_FRAMEWORK_SELFTEST variable. This was originally needed
back in 4231d1ba99 (t0000: do not get self-test disrupted by
environment warnings, 2018-09-20).
It hasn't been needed since I deleted the relevant code in test-lib.sh
in c0eedbc009 (test-lib: remove check_var_migration, 2021-02-09), I
just didn't notice that it was set here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no point in creating a repository or directory only to decide
right afterwards that we're skipping all the tests. We can save
ourselves the redundant "git init" or "mkdir" and "rm -rf" in this
case.
We carry around the "$remove_trash" variable because if the directory
is unexpectedly gone at test_done time we'll still want to hit the
"trash directory already removed" error, but not if we never created
the trash directory. See df4c0d1a79 (test-lib: abort when can't
remove trash directory, 2017-04-20) for the addition of that error.
So let's partially revert 06478dab4c (test-lib: retire $remove_trash
variable, 2017-04-23) and move the decision about whether to skip all
tests earlier.
Let's also fix a bug that was with us since abc5d372ec (Enable
parallel tests, 2008-08-08): we would leak $remove_trash from the
environment. We don't want this to error out, so let's reset it to the
empty string first:
remove_trash=t GIT_SKIP_TESTS=t0001 ./t0001-init.sh
I tested this with --debug, see 4d0912a206 (test-lib.sh: do not barf
under --debug at the end of the test, 2017-04-24) for a bug we don't
want to re-introduce.
While I'm at it, let's move the HOME assignment to just before
test_create_repo, it could be lower, but it seems better to set it
before calling anything in test-lib-functions.sh
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new testcase where one side of history renames:
olddir/ -> newdir/
and the other side of history renames:
olddir/a -> olddir/alpha
When using merge.directoryRenames=true, it seems logical to expect the
file to end up at newdir/alpha. Unfortunately, both merge-recursive and
merge-ort currently see this as a rename/rename conflict:
olddir/a -> newdir/a
vs.
olddir/a -> newdir/alpha
Suggesting that there's some extra logic we probably want to add
somewhere to allow this case to run without triggering a conflict. For
now simply document this known issue.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-05-04 12:53:48 +09:00
951 changed files with 123216 additions and 103051 deletions
If specified, multiple packfiles may be created, which also
If specified, multiple packfiles may be created, which also
prevents the creation of a bitmap index.
prevents the creation of a bitmap index.
The default is unlimited, unless the config variable
The default is unlimited, unless the config variable
`pack.packSizeLimit` is set.
`pack.packSizeLimit` is set. Note that this option may result in
a larger and slower repository; see the discussion in
`pack.packSizeLimit`.
-b::
-b::
--write-bitmap-index::
--write-bitmap-index::
Write a reachability bitmap index as part of the repack. This
Write a reachability bitmap index as part of the repack. This
only makes sense when used with `-a` or `-A`, as the bitmaps
only makes sense when used with `-a`, `-A` or `-m`, as the bitmaps
must be able to refer to all reachable objects. This option
must be able to refer to all reachable objects. This option
overrides the setting of `repack.writeBitmaps`. This option
overrides the setting of `repack.writeBitmaps`. This option
has no effect if multiple packfiles are created.
has no effect if multiple packfiles are created, unless writing a
MIDX (in which case a multi-pack bitmap is created).
--pack-kept-objects::
--pack-kept-objects::
Include objects in `.keep` files when repacking. Note that we
Include objects in `.keep` files when repacking. Note that we
@ -187,6 +190,15 @@ this "roll-up", without respect to their reachability. This is subject
to change in the future. This option (implying a drastically different
to change in the future. This option (implying a drastically different
repack mode) is not guaranteed to work with all other combinations of
repack mode) is not guaranteed to work with all other combinations of
option to `git repack`.
option to `git repack`.
+
When writing a multi-pack bitmap, `git repack` selects the largest resulting
pack as the preferred pack for object selection by the MIDX (see
linkgit:git-multi-pack-index[1]).
-m::
--write-midx::
Write a multi-pack index (see linkgit:git-multi-pack-index[1])
containing the non-redundant packs.
CONFIGURATION
CONFIGURATION
-------------
-------------
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
